Butech - Subsea presentation brochure

subsea valves
PERFORMA N C E • QU A LITY • R ELIA B ILITY
Table of Contents
Introduction to Subsea Valves
2
15,000 PSI Ball Valves
5
10,000 PSI Ball Valves
7
6,000 PSI Ball Valves
23
Check Valves25
Needle Valves26
Additional Subsea Valves
27
1
In subsea critical systems, nothing is more important than structural integrity to assure performance,
safety and reliability. BuTech API 6A (19th ed.), ISO 10423:2003 PRs, Annex F/PSL3G qualified valves ensure the
highest quality and most reliable performance for pressure control systems, throughout the entire life of the
subsea structure.
BuTech subsea valves meet performance, safety and reliability expectations in the deepest water and harshest
environments in the offshore oil and gas industry. As wells have become deeper, BuTech has been a leader at
developing new and innovative ways to control the increasing temperature and pressure requirements at these
greater depths.
BuTech’s subsea, relief, needle, ball, double block and bleed valves, and assemblies are installed in some of the
oil and gas industry’s most challenging applications. From ball valves for onshore and topside applications to
subsea valves performing in the harsh environments of the deepest offshore waters, BuTech leads the industry
in performance, safety, and reliability.
Features and Benefits
• API 6A , 19th ed., ISO 10423:2003 PR2, Annex F/PSL3G qualified valves available
• All valves are internally pressure tested to at least 50% over rated pressure
• Externally tested to 14,000’ (4200 Meters) depth
• Typical service life guarantee of 25 years
• Custom designed for instrumentation, process control and chemical injection applications. Remote
operated vehicle (ROV) capabilities in template control panels, subsea wellheads and christmas trees
• Manufactured to meet the requirements of NACE MR0175, API Spec 6A & 17D, ASME,
ANSI and various others
• Trouble free operation in a variety of media including hydrogen sulfides, corrosion
inhibitors, paraffin thinners, hydraulic fluids and other harsh chemicals
Standard Materials of Construction
BuTech Subsea Ball Valves may be produced in any machinable metal with special seal materials.
Please consult factory for custom requirements.
Standard materials include:
• 316 cold-worked stainless steel
• Super Duplex
Considerations in Selecting the Proper Subsea Valve
• Pressure/temperature rating
• Needle or ball valve
• End connections
• Orifice size needed
• Service conditions and fluids
• Flow requirements
• Performance requirements
• Dimensional envelope and weight
• Material compatibility
• Method of operation
• Flow pattern required
• Service life expectancy
• Customer specifications
• Handle configuration
• Water depth
2
Subsea Needle Valves
• Non-rotating, non-rising stem prevents
galling and scoring
• Metal to metal seating
• Stem packing below threads prevents
thread galling and fouling
• Positive gland locking device
• Special alloys available for extreme service
• High temperature stem packing available
• Bracket or panel mounting
• Externally sealed design for depths to
14,000’ (4200 meters)
• Wide variety of end connections and
actuation handles
Subsea Ball Valves
• Rapid quarter turn action provides quick open/
close action for easy ROV or diver operation
• Independent spring-loaded seals for full
differential pressure
• Trunnion mounted ball design and blowout proof
stem for maximum safety
• Externally sealed design for depths to 14,000 feet
(4200 meters)
• Easy mounting for ROV, diver or remote actuation
• Unlimited replaceable end connection capabilities
for installation versatility
• Double barrier o-rings or cup seal options to
prevent the ingress of seawater
• Full port flow path through valve to minimize
pressure drop
• Bi-directional flow capabilities
• A variety of seal materials are available for
different services
• Special alloys available for extreme service
• PEEK® seats to offer resistance to chemicals,
heat and wear/ abrasion
• Optional mounting patterns and interfaces
• 3/8’, 1/2” & 1” 2-way design, 3/16’, 3/8” & 1/2”
3-way design, 3/8” 4-way configurations available
Connection
• Low Pressure - compression sleeve
• Medium Pressure - coned & threaded
• High Pressure - coned & threaded
3
Subsea Check Valves
• Ensure flow in only one direction
• Rated to pressures of 15,000 psig and above
• Designed to the same rigorous standards as Subsea Ball and Needle Valves, insuring a long,
maintenance free life
• Available in all machinable alloys
• Externally sealed design for depths to 14,000’
• Available with soft seat o-ring style or metal to metal seat poppet style
• Cracking pressures can be factory set to a desired pressure
Availability
• Pipe - NPT threads
• Also available: API, flange, zero clearance,
socket weld, butt weld, SAE, JIC, BSP, ISO
and others
4
Subsea
Ball Valves
15,000 PSIG
C-2130-01
Subsea Ball Valve
2-way, 90 deg Turn
15,000 psig
.312”
3.4
Single
2507 SD
Inconel 625
Inconel 625
HNBR 2269-90
Various
ROV
3.62”
1.75”
5.36”
22,500 psig
36 ft-lbs
.94''
(23.8)
.19'' notch
(4.83)
.50'' Square
(12.7)
m8x1.25mm taps
1.25''
(31.7)
.25''
(6.3)
m8x1.25mm tap
3.00''
(76.2)
1.62''
(41.1)
2.36''
(60)
150˚
1.75''
(44.4)
.87''
(22.2)
.50''
.50''
(12.7)
(12.7)
.062''
(1.57)
.19'' Notch
(4.83)
.281'' DIA
(7.14)
Description
Detail
MAWP
Orifice
CV
Barrior
Body
Stem
Trunnion
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
Valve Features
• 15,000 psi service
• NACE construction – MR0175 up to
H2S pressure of .01 MPa (1.5 psia)
• ½” Sq. stem
• ROV operation with API bucket mounting
• Available in 3-way configuration with CV of 2.4
.25''
(6.3)
5
m8x1.25mm tap
3.62''
(92)
1.81''
(46)
TYPICAL SIDE CONN
1.25''
(31.7)
m8x1.25mm taps
(4) Places
C-3639-03
Subsea Ball Valve
3-way, 90 deg Turn
15,000 psig
.375”
2.4
Double
2507 SD
Inconel 625
2507 SD
HNBR 2269 Various
ROV
5.12”
2.25”
9.78”
22,500 psig
Subsea Ball Valve
2-way, 90 deg Turn
15,000 psig
.375”
3.4
Double
2507 SD
Inconel 625
2507 SD
HNBR 2269 Various
ROV
5.12”
2.25”
9.78”
22,500 psig
36 ft-lbs
36 ft-lbs
2.618'' DIA
(66.5)
4.724'' DIA
(120)
VIEW SHOWING FLOW
INDICATOR NOTCH IN
TOP OF STEM
.50''
(12.7)
M8X1.25MM TAP
X .59 (15) F'THD
(4) PLACES ON
THIS SURFACE
9.78''
(248.4)
5.50''
(139.7) 3.19''
(81)
1.12''
(28.5) 2.25''
(57.1)
SHOWN AS:
C-3639-01-18-18
(9/16'' M/P CONNS)
.50''
(12.7)
.50''
(12.7)
1.93''
(49)
3.386''
(86)
4.291''
(109)
.492''
(12.5)
Valve Features
• Dynamic cup-seal on rotating stem
• Double barrier design
• NACE construction – MR0175 up to
H2S pressure of .02 MPa (3.0 psia)
• ½” sq. stub stem
• API Bucket mounted with custom
blade handle
• Available as 2-way straight,
2-way angle and 3-way with
mid-stroke shut-off
1.875''
(47.63)
'A'
1.875''
(47.63)
VIEW A-A
2.56''
5.12'' (65)
(130)
.50''
(12.7)
M8X1.25MM TAP
X .59 (15) F'THD
.748''
(19)
Description
Detail
MAWP
Orifice
CV
Barrior
Body
Stem
Trunnion
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
C-3639-02
TYPICAL SIDE CONN
VIEW SHOWING FLOW
INDICATOR NOTCH IN
TOP OF STEM
SHOWN AS:
C-3639-03-149-*-*B
(9/16'' M/P CONNS)
A
VIEW SHOWING
FLOW INDICATOR
NOTCH IN TOP OF STEM
A
SHOWN AS:
C-3639-02-18-18-18B
(9/16'' M/P CONNS)
A
A
VIEW A-A
VIEW A-A
3.14''
(79.7)
6
10,000 PSIG
Description
Detail
MAWP
Orifice
CV
Barrior
Body
Stem
Trunnion
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
C-1768-02
C-1768-04
C-1768-05
C-1768-06
C-1768-07
Subsea Ball Valve
2-way, 90 deg Turn
10,000 psig
.375”
2.4
Single
316
Inconel 625
316
Nitrile N1210-90
Various
ROV
3.62”
1.75”
5.36”
15,000 psig
Subsea Ball Valve
3-way, 90 deg Turn
10,000 psig
.375”
2.4
Single
316
Inconel 625
316
Nitrile N1210-90
Various
ROV
3.62”
1.75”
5.36”
15,000 psig
Subsea Ball Valve
2-way, 90 deg Turn
10,000 psig
.375”
2.4
Single
316
Inconel 625
316
GFLT 9131
Various
ROV
3.62”
1.75”
5.36”
15,000 psig
Subsea Ball Valve
3-way, 90 deg Turn
10,000 psig
.375”
2.4
Single
316
Inconel 625
316
GFLT 9131
Various
ROV
3.62”
1.75”
5.36”
15,000 psig
Subsea Ball Valve
3-way, 180 deg Turn
10,000 psig
.375”
2.4
Single
316
Inconel 625
316
Nitrile N1210-90
Various
ROV
3.62”
1.75”
5.36”
15,000 psig
36 ft-lbs
36 ft-lbs
36 ft-lbs
36 ft-lbs
36 ft-lbs
Valve Features
• Most common
3/8” sub-sea
ball valve
• Economical 316
construction
• 10,000 psi
service
• ½’ Sq. stem
• API bucket
mounting
1.25''
(31.7)
150˚
.50'' Square
(12.7)
C-1768-03-*-*-*B
C-1768-04-*-*-*B
C-1768-06-*-*-*B
C-1768-07-*-*-*B
.25''
(6.3)
M8X1.25MM TAP
3.00''
(76.2)
1.62''
(41.1)
2.36''
(60)
.19'' Notch
(4.83)
.94''
(23.8)
.19'' Notch
(4.83)
.062''
(1.57)
.281'' DIA
(7.14)
.50''
(12.7)
1.75''
(44.4)
.87''
(22.2)
.50''
(12.7)
1.25''
(31.7)
.25''
(6.3)
7
C-1768-01-*-*
C-1768-02-*-*
C-1768-05-*-*
3.62''
(92)
1.81''
(46)
TYPICAL SIDE CONN
C-2892-02
Subsea Ball Valve
3-way, 90 deg Turn
10,000 psig
.28”
1.4
Single
316
Inconel 625
316
Buna-N
1/4” FNPT
ROV
5.00”
5.00”
5.51”
15,000 psig
Subsea Ball Valve
3-way, 90 deg Turn
10,000 psig
.28”
1.4
Single
316
Inconel 625
316
Buna-N
3/8” FNPT
ROV
5.00”
5.00”
5.51”
15,000 psig
36 ft-lbs
36 ft-lbs
Valve Features
• Internally vented at mid-stroke to prevent
cross contamination of injection fluids
• Hub stop included on ½” sq. stem
• Low torque operation
• Side bracket mounted
• Other flow patterns available
.50'' SQUARE
(12.7)
1.50''
(38.1)
1.50''
(38.1)
.19'' NOTCH
(4.8)
Description
Detail
MAWP
Orifice
CV
Barrior
Body
Stem
Trunnion
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
C-2892-01
1.00''
(25.4)
1.75'' DIA
(44.4)
.19'' NOTCH
(4.8)
2.07''
(52.6)
1.50''
(38.1)
1.50''
(38.1)
Z
.28'' (7.1) DIA HOLES
(4) PLACES
TYPICAL SIDE CONN
C
X
5.00''
(127)
1/4'' FNPT
CONN
VIEW X-X
1.50''
(38.1)
1.00''
(25.4)
1.00''
(25.4)
Z
B
3.00''
(76.2)
1.00'' 1.00''
(25.4) (25.4)
5.51''
(139.9)
X
.28'' (7.1) DIA HOLES
(4) PLACES
4.00''
(101.6)
5.00''
(127)
2.00''
(50.8)
VIEW Y-Y
1/4'' FNPT CONN
2.00''
(50.8)
90˚
TURN
B
Y
VIEW Z-Z
POSITION #1
(INLET)
FLOW THRU
POSITION #2
(VENT)
FLOW BLOCKED
POSITION #3
(INLET)
FLOW THRU
T
VIEW Z-Z
N
VE
VIEW Z-Z
Y
4.00''
(101.6)
45˚
TURN
A
1/4'' FNPT CONN
VIEW Z-Z
1/4'' FNPT CONN
NOTCH
IN TOP
OF STEM
8
Description
Detail
MAWP
Orifice
CV
Barrior
Body
Stem
Trunnion
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
Description
Detail
MAWP
Orifice
CV
Barrior
Body
Stem
Trunnion
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
C-1619-05
C-1619-06
C-1619-07
C-1619-09
Subsea Ball Valve
2-way, 90 deg Turn
10,000 psig
.375”
3.4
Single
316
Inconel 625
316
Buna-N
Various
ROV
3.62”
1.75”
5.47”
15,00 psig
Subsea Ball Valve
3-way diverter
10,000 psig
.375”
2.4
Single
316
Inconel 718
316
Buna-N
Various
ROV
3.62”
1.75”
5.47”
15,00 psig
Subsea Ball Valve
3-way diverter
10,000 psig
.375”
2.4
Single
316
Inconel 625
316
Buna-N
Various
ROV
3.62”
1.75”
5.47”
15,00 psig
Subsea Ball Valve
3-way diverter
10,000 psig
.375”
2.4
Single
316
Inconel 625
316
Buna-N
Various
ROV
3.62”
1.75”
5.47”
15,00 psig
36 ft-lbs
36 ft-lbs
36 ft-lbs
36 ft-lbs
C-1619-10
C-1619-11
C-1619-12
C-1619-13
Subsea Ball Valve
2-way, 90 deg Turn
10,000 psig
.375”
3.4
Single
316
Inconel 625
316
Buna-N
Various
ROV
3.62”
1.75”
5.47”
15,000 psig
Subsea Ball Valve
3-way diverter
10,000 psig
.375”
2.4
Single
316
Inconel 625
316
Buna-N
Various
Handle
3.62”
1.75”
5.47”
15,000 psig
Subsea Ball Valve
3-way diverter
10,000 psig
.375”
2.4
Single
316
Inconel 625
316
GFLT 9131
Various
ROV
3.62”
1.75”
5.47”
15,000 psig
Subsea Ball Valve
2-way, 90 deg Turn
10,000 psig
.375”
3.4
Single
316
Inconel 625
316
GFLT 9131
Various
ROV
3.62”
1.75”
5.47”
15,000 psig
36 ft-lbs
36 ft-lbs
36 ft-lbs
36 ft-lbs
Valve Features
• Economical 316 construction
• 10,000 psi service
• ½’ Sq. stem
• Side mounting
• Optional hub and stops
9
1.25''
1.25''
.75''
.75''
.50'' SQUARE
1.00''
2.07''
1.75'' DIA
A
B
X
X
90˚ TURN
1.12''
3.00''
1.12''
1.62''
5.47''
C
2-WAY
PATTERNS
1.81''
3.62''
TYPICAL SIDE CONN
2.00'' DIA REF
PANEL HOLE
1.75'' DIA
.61'' REF
5.75''
.70''
2.25''
2.75''
.50'' DIA
7.25''
A
B
X
X
90˚ TURN
C
45˚
C-1619-11-22-22-22B
VIEW X-X
VIEW X-X
10
C-1727-02
Description
Detail
MAWP
Orifice
CV
Barrior
Body
Stem
Trunnion
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
Valve Features
• Most common 1/2” sub-sea ball valve
• Economical 316 construction
• 10,000 psi service
• ½’ Sq. stem
• API bucket mounting
Subsea Ball Valve
2-way, 90 deg Turn
10,000 psig
.500”
10
Single
316
Inconel 625
316
Nitrile N1210
Various
Rov
4.12”
1.75”
6.3”
15,000 psig
36 ft-lbs
1.25''
(31.7)
1.25''
(31.7)
.19'' NOTCH
(4.83)
.37''
(9.5)
.062''
(157)
.50'' SQUARE
(12.7)
3.50''
(89)
6.30''
(160)
1.76''
(44.7)
2.36''
(60)
.94''
(23.8)
150˚
.281'' DIA
(7.14)
M8X1.25MM TAP
M8X1.25MM TAPS
(4) PLACES
ON THIS SURFACE
.37''
(9.5)
.50''
(12.7)
.87''
(22.2)
1.75''
(44.4)
.50''
(12.7)
.19'' NOTCH
(4.83)
2.06''
(52.3)
4.12''
(104.6)
11
M8X1.25MM TAP
ON THIS SURFACE
TYPICAL SIDE CONN
12
C-3210-01
Description
Detail
MAWP
Orifice
CV
Barrior
Body
Stem
Trunnion
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
Subsea Ball Valve
4-way, 90 deg turn
10,000 psig
.125”
1.2
Single
316
Inconel 625
316
Buna-N
Various
ROV
4.00”
4.00”
8.52”
15,000 psig
Valve Features
• Unique porting to prevent cross contamination
of injection fluids
• Blade handle adapter to ½” sq. stem
• API bucket mounted
.37''
(9.4)
1.00''
(25.4)
4.00''
(101.6)
2.00''
(50.8)
.37'' SLOT
(9.5)
36 ft-lbs
.37''
(9.4)
TYPICAL SIDE CONN
10.97''
(278.6)
3.00''
1.50'' (76.2)
(38.1)
2.00''
(50.8)
D
.50''
(12.7)
Y
B
5.81''
(147.6)
6.06'' DIA
(153.9)
1.25''
(31.7)
4.00''
(101.6)
1.25''
(31.7)
.50''
(12.7)
4.25''
(107.9)
10.62''
(269.7)
Y
M8X1.25MM TAPS
(4) PLACES
=(IN VALVE BODY)
7.12''
(180.8)
2.45''
(62.2)
7.62''
(193.5)
3/8'' (9.5) DRILL THRU
(4) PLACES
(IN ROV BUCKET)
13
M8X1.25MM TAP
(1) PLACE
VIEW Z-Z
D
Z
A
C
Z
B
VIEW Y-Y
A
B
90
D
D
C
°
45°
A
C
B
ALL PORTS BLOCKED
D
A
C
B
A THRU B & C THRU D
PORTS OPEN
A THRU D & B THRU C
PORTS OPEN
C-3210-01 Flow Patterns
14
C-1128-01
Description
Detail
MAWP
Orifice
CV
Barrior
Body
Stem
Trunnion
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
Valve Features
• Dynamic cup-seal on rotating stem
• Double barrier design
• ½” sq. stub stem
• API Bucket mounted
Subsea Ball Valve
2-way, 90 deg Turn
10,000 psig
.375”
2.4
Double
316
Inconel 625
316
Nitrile
Various
ROV
5.12”
2”
7.86”
15,000 psig
36 ft-lbs
1.25''
(31.7)
.50''
(12.7)
1.00''
(25.4)
2.00''
(50.8)
.50''
(12.7)
1.25''
(31.7)
TYPICAL SIDE CONN
.94''
(23.8)
.19'' NOTCH
(4.83)
150˚
.50'' SQUARE
(12.7)
.50''
(12.7)
5.50''
(139.7)
3.19''
(81)
2.36''
(59.9)
.062''
(1.57)
.50''
(12.7)
15
5.12''
(130)
2.56''
(65)
.281'' DIA
(7.14)
.19'' NOTCH
(4.83)
16
Description
Detail
MAWP
Orifice
CV
Barrior
Body
Stem
Trunnion
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
Description
Detail
MAWP
Orifice
CV
Barrior
Body
Stem
Trunnion
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
C-1147-02
C-1147-04
C-1147-05
C-1147-06
Subsea Ball Valve
2-way, 90 deg Turn
10,000 psig
.375”
3.4
Single
316
Inconel 625
316
Nitrile
Various
Handle
3.62”
1.75”
7.75”
15,000 psig
Subsea Ball Valve
3-way, 90 deg Turn
10,000 psig
.375”
2.4
Single
316
Inconel 625
316
Nitrile
Various
Handle
3.62”
1.75”
7.75”
15,000 psig
Subsea Ball Valve
3-way, 180 deg Turn
10,000 psig
.375”
2.4
Single
316
Inconel 625
316
Nitrile
Various
Handle
3.62”
1.75”
7.75”
15,000 psig
Subsea Ball Valve
3-way, 90 deg Turn
10,000 psig
.375”
2.4
Single
316
Inconel 625
316
Viton/Flourosilicone
Various
Handle
3.62”
1.75”
7.75”
15,000 psig
36 ft-lbs
36 ft-lbs
36 ft-lbs
36 ft-lbs
C-1147-07
C-1147-08
C-1147-09
C-1147-10
Subsea Ball Valve
3-way, 90 deg Turn
10,000 psig
.375”
2.4
Single
316
Inconel 626
317
Nitrile
Various
Handle
3.62”
1.75”
7.75”
15,000 psig
Subsea Ball Valve
3-way, 90 deg Turn
10,000 psig
.375”
2.4
Single
316
Inconel 626
317
Nitrile
Various
Handle
3.62”
1.75”
7.75”
15,000 psig
Subsea Ball Valve
2-way, 90 deg Turn
10,000 psig
.375”
3.4
Single
316
Inconel 626
317
Nitrile
Various
Handle
3.62”
1.75”
7.75”
15,000 psig
Subsea Ball Valve
2-way, 90 deg Turn
10,000 psig
.375”
3.4
Single
316
Inconel 625
316
Nitrile
Various
Handle
3.62”
1.75”
7.75”
15,000 psig
36 ft-lbs
36 ft-lbs
36 ft-lbs
36 ft-lbs
Valve Features
• Economical 316 construction
• 10,000 psi service
• ½’ Sq. stem
• ROV operation with “T” handle and API bucket mounting
• Offset “T” and “L” handles available
17
1.25''
(31.7)
.50''
(12.7)
1.75''
(44.4)
.87''
(22.2)
.50''
(12.7)
1.25''
(31.7)
1.25'' DIA
'A'
('A1')
.50'' DIA
(12.7)
'B'
('B1')
.25''
(6.3)
3.00''
(76.2)
1.62''
(41.1)
2.12''
(53.8)
7.75''
(196.8)
1.94''
(49.3)
.62'' DIA
(15.7)
3.87''
(98.3)
.50'' SQUARE
(12.7)
.25''
(6.3)
3.62''
(92)
1.81''
(46)
C-1147-01-*-*
C-1147-02-*-*
'B'
('B1')
.19'' (48.3)
X
3.87'' DIA
(98.3)
.75'' DIA
(19)
.19'' (48.3)
C-1147-09-*-*
TYPICAL SIDE CONN
C-1147-10-*-*
HANDLE DIMENSIONS
–09
– 07– 09
– 01– 02– 03– 04– 05– 06– 10
parts list cat#
n/a
6.00''
10.50''
'A'
n/a
152.4
266.6
‘A’
4.00’’
3.00’’
5.25''
‘B’
101.6
76.2
133.3
‘BI’
18
Description
Detail
MAWP
Orifice
CV
Barrior
Body
Stem
Trunnion
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
C-3541-01
C-3541-02
Subsea Ball Valve
3-way, 90 deg Turn
10,000 psig
.312”
2
Single
316
Inconel 625
Inconel 625
HNBR 2269-90
Various
ROV
3.62”
2.75”
6.80”
15,000 psig
Subsea Ball Valve
2-way, 90 deg Turn
10,000 psig
.312”
2
Single
316
Inconel 626
Inconel 626
HNBR 2269-90
Various
ROV
3.62”
2.75”
6.80”
15,000 psig
155 ft-lbs
155 ft-lbs
Valve Features
• NACE construction
• Blade handle on ½” sq. stub stem
• Robust pin stops
• API Bucket mounted
1.063''
(27)
30˚
45˚
M8X1.25MM TAPS
(4) PLACES
1.00''
(25.4)
.62''
(15.7)
.31''
(7.9)
3.48''
(88.4)
3.80''
(96.5)
3.17''
(80.5)
2.50''
(63.5)
3.00''
(76.2)
1.62''
(41.1)
.50'' SQUARE
(12.7)
.25''
(6.3)
.50''
(12.7)
M8X1.25MM TAP
C-3541-01-17-17-17B
1.81''
(46)
3.62''
(92)
19
N
45˚
.495''
(12.57)
1.75'' DIA
(44.4)
TUR
.495''
(12.57)
1.37''
(37.8)
.062'' (1.6) X 45˚ CHAM
ALL OUTSIDE EDGES
2.76''
(70.1)
.49''
(12.4)
90˚
30˚
TYPICAL SIDE CONN
1.063''
(27)
2.75''
(69.8)
2.43
8'' D
(61.9 IA
)
20
C-2013-02
Description
Detail
MAWP
Orifice
CV
Barrior
Body
Stem
Trunnion
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
Subsea Ball Valve
2-way, 90 deg Turn
10,000 psig
.312”
2
Single
316
Inconel 625
Inconel 625
HNBR 2269-90
Various
ROV
3.62”
2.25”
5.36”
15,000 psig
Valve Features
• 10,000 psi service
• 316 Annealed NACE construction
• ½’ Sq. stem
• ROV operation with API bucket mounting
36 ft-lbs
1.25''
(31.7)
M8X1.25MM TAPS
(4) PLACES
.062''
(1.57)
.19'' NOTCH
(4.83)
.94''
(23.8)
.19'' NOTCH
(4.83)
.50'' SQUARE
(12.7)
.25''
(6.3)
M8X1.25MM TAP
3.00''
(76.2)
1.62''
(41.1)
2.36''
(60)
150˚
.25''
(6.3)
M8X1.25MM TAP
1.81''
(46)
3.62''
(92)
21
.281'' DIA
(7.14)
TYPICAL SIDE CONN
.50''
(12.7)
1.12''
(28.6)
2.25''
(57.1)
.50''
(12.7)
1.25''
(31.7)
C-2023-01
Description
Detail
MAWP
Orifice
CV
Barrior
Body
Stem
Trunnion
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
Valve Features
• Economical 316 construction
• Hub stop included on ½” sq. stem
• Low torque operation
• Side bracket mounted
• Other flow patterns available
Subsea Ball Valve
4-way, 90 deg turn
10,000 psig
.375”
2.4
Single
316
Inconel 625
316
Buna-N
Various
ROV
4.00”
4.00”
5.86”
15,000 psig
36 ft-lbs
D
A
.062''
(1.57)
.12'' NOTCH
(3.01)
150˚
.50'' SQUARE
(12.7)
.94''
(23.8)
1.50''
(38.1)
1.50''
(38.1)
.28'' (7.1) DIA HOLES
(4) PLACES
1.50''
(38.1)
1.75'' DIA
(44.4)
Z
1.00''
(25.4)
Z
1.50''
(38.1)
6.21''
X
1.00''
(25.4)
2.86''
(72.6)
1.50''
(38.1)
W
(157.7)
3.00''
(76.2)
1.00''
1.00''
(25.4)
(25.4)
VIEW Z-Z
.281'' DIA
(7.14)
.12'' NOTCH
(3.01)
TYPICAL SIDE CONN
Y
4.00''
(101.6)
2.00''
(50.8)
C
B
Y
W
X
.28'' (7.1) DIA HOLES
(4) PLACES
C-2023-01-17-17-17-17
4.00''
(101.6)
2.00''
(50.8)
VIEW Y-Y
VIEW W-W
VIEW X-X
22
6,000 PSIG
Description
Detail
MAWP
Orifice
CV
Barrior
Body
Stem
Trunnion
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
Description
Detail
MAWP
Orifice
CV
Barrior
Body
Stem
Trunnion
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
23
C-1884-01
C-1884-02
C-1884-03
Subsea Ball Valve
2-way, 90 deg Turn
6,000 psig
.375”
3.4
Single
316
Inconel 625
316
Nitrile N1210-90
Various
Handle
3.62”
1.75”
7.63”
9,000 psig
Subsea Ball Valve
3-way, 90 deg Turn
6,000 psig
.375”
2.4
Single
316
Inconel 625
316
Nitrile N1210-90
Various
Handle
3.62”
1.75”
7.63”
9,000 psig
Subsea Ball Valve
3-way, 90 deg Turn
6,000 psig
.375”
2.4
Single
316
Inconel 625
316
Nitrile N1210-90
Various
Handle
3.62”
1.75”
7.63”
9,000 psig
36 ft-lbs
36 ft-lbs
36 ft-lbs
C-1884-04
C-1884-05
Subsea Ball Valve
3-way, 180 deg Turn
6,000 psig
.375”
2.4
Single
316
Inconel 625
316
Nitrile N1210-90
Various
Handle
3.62”
1.75”
7.63”
9,000 psig
Subsea Ball Valve
2-way, 90 deg Turn
6,000 psig
.375”
3.4
Single
316
Inconel 625
316
Nitrile N1210-90
Various
Handle
3.62”
1.75”
7.63”
9,000 psig
36 ft-lbs
36 ft-lbs
Valve Features
• Economical 316 construction
• 6,000 psi service
• ½’ Sq. stem
• ROV operation with “T” handle and
API bucket mounting
• Side bracket mounting
10.50''
5.25''
3.87''
.50'' Dia
1.25'' Dia
.62'' Dia
1/4'' fnpt conn
w/ .375'' dia port
(2) PLACES
1.94''
1.31''
1.50''
1.31''
1.12''
2.12''
C-1884-01
1.00''
2.88''
7.63''
.50'' square
1.81''
3.62''
5.62''
.28'' DIA HOLES
(4) PLACES
.87''
1.75''
TYPICAL SIDE CONN
24
Subsea
Check Valves
B-2756-01
Description
Detail
MAWP
Orifice
CV
Barrior
Body
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
Sub-Sea Check Valve
O-RING CHECK VALVE
10,000 psig
.375”
3.4
NA
316
PTFE
1/2” 160 BWP
N/A
6.91”
2.12”
2.12”
15,000 psig
Valve Features
• PTFE seated impervious to harsh chemicals
• Locking gland to prevent back-out
• Bubble tight for liquid or gas service
NA
6.91''
(175.5)
5.25''
(133.3)
+- .02
2.12'' hex
(54)
FLOW
25
81''
(20.6)
.840''/.835'' DIA
(21.3/21.21)
.469''/.474'' dia
(11.9/12.04)
.32''
+- .02
.50''
Subsea
Needle Valves
Sub-Sea Needle Valve
2-way Straight
6,000 psig
.203”
0.75
NA
316
Alloy 725
Glass filled PTFE
3/8” SAE
Handle
2.5”
1.5” 6.15”
9,000 psig
NA
.50'' dia
4.00''
.94''
.94''
2.81''
3.25''
.75''
6.15''
Description
Detail
MAWP
Orifice
CV
Barrior
Body
Stem
O-Ring
Connection
Actuator
Length
Width
Height
Hydrostatic Test
Pressure
Max Torque
on Stem
Valve Features
• Internal stem threads protected
from ingress of crud and debris
• Pressures to 15,000 psi with M/P connections
• Higher flow with larger trim options
• Available in Multi-Stem manifold valves
• API flange face mount options
• Can be produced in NACE and CR alloys
2.44''
B-4957-01
1.25''
2.50''
26
Additional Subsea Valves
2nd Item Number
For more information, please contact factory.
Description
Detail
MAWP
Orifice
CV
Subsea Check Valves
Subsea Check Valve
Poppet
15,000 psig
.203”
B-4560-01
Subsea Needle Valve
2-way straight
15,000 psig
.203”
B-4742-01
Subsea Needle Valve
2-way straight, with 3/4” MP tube stub adapter
15,000 psig
.203”
B-4760-01
Subsea Needle Valve
2-way angle, 1/2 FNPT x 1/2” MNPT
15,000 psig
.203”
B-5063-01
Subsea Needle Valve
2-way straight
15,000 psig
.203”
B-5567-02
Subsea Needle Valve
2-way angle, with replacable seat
20,000 psig
.094”
C-1452-01
Subsea Needle Valve
2-way straight
10,000 psig
.44”
C-1555-01
Subsea Needle Valve
2-way straight, API BX-151/NACE MRO175
10,000 psig
.359”
C-1754-01
Needle Valve
2-way straight, API BX-151/NACE MRO175
10,000 psig
.427”
C-1772-02
Needle Valve
2-way angle, API BX-151/NACE MRO175
10,000 psig
.427”
C-3299-01
Needle Valve Assembly
2-way angle
10,000 psig
.56”
C-2329-01
Subsea Needle Valve
2-way straight
10,000 psig
.44”
C-2540-01
Subsea Needle Valve
2-way straight
10,000 psig
.44”
D-1035-01
B-3865-02
Subsea Needle Valves
27
Subsea Needle Valve
2-way straight
10,000 psig
.427”
Subsea Needle Valve
D-1036-01
Ball Valves - 2-Way 90 Degree Turn
2-way straight
10,000 psig
.427”
C-1641-01
Subsea Ball Valve
2-way straight, 90 degree turn
15,000 psig
.375”
2.4
C-2513-01
Subsea Valve
2-way, 90 deg turn
15,000 psig
.47”
9.4
C-3236-01
Subsea Ball Valve
2-way, 90 deg turn
15,000 psig
.375”
2
C-2418-01
Subsea Ball Valve
2-way, 90 degree turn
15,000 psig
.375”
2.4
C-1728-01
Subsea Valve
2-way straight, 90 degree turn
12,500 psig
.500”
10
C-2233-01
Subsea Ball Valve
2-way, 90 deg turn
10,000 psig
.5”
10
C-2311-01
Subsea Valve
2-way, 90 deg turn
10,000 psig
.375”
2.4
C-2832-01
Metal Boss Seal Valve
2-way, 90 deg turn
10,000 psig
.5”
10
C-2935-01
Subsea Ball Valve
2-way, 90 deg turn
10,000 psig
.375”
2.4
C-3022-01
Subsea Ball Valve
2-way, 90 deg turn
10,000 psig
.375”
3.4
C-3023-01
Subsea Ball Valve
2-way, 90 deg turn
10,000 psig
.5”
10
C-3027-01
Subsea Ball Valve
2-way, 90 deg turn
10,000 psig
.375”
3.4
C-3037-01
Subsea Ball Valve
2-way, 90 deg turn
10,000 psig
.375”
3.4
C-3130-01
Subsea Ball Valve
2-way, 90 deg turn
10,000 psig
.375”
2.4
C-3168-02
Subsea Ball Valve
2-way, 90 deg turn
10,000 psig
.375”
2.4
C-3489-01
Subsea Ball Valve
2-way, 90 deg turn
10,000 psig
.375”
2.4
C-3567-01
Subsea Ball Valve
2-way, 90 deg turn
10,000 psig
.312”
2
C-3591-01
Ball Valve
2-way, 90 deg turn
10,000 psig
.5”
10
C-3618-01
Subsea Ball Valve
2-way, 90 deg turn
10,000 psig
.5”
9.4
C-2369-01
Subsea Ball Valve
2-way, 90 deg turn
10,000 psig
.466”
9.4
C-1903-01
SOG Subsea Valve
2-way, 90 degree turn, Sour Gas
10,000 psig
0.312”
2
C-2124-01
Subsea Ball Valve
2-way, 90 deg turn, Sour gas
10,000 psig
.469”
9.4
C-2461-01
Subsea Ball Valve
2-way, 90 degree turn
10,000 psig
.375”
3.4
C-3143-01
Subsea Ball Valve
2-way, 90 degree turn
10,000 psig
.5”
10
C-3300-01
Ball Valve Assembly
2-way, 90 degree turn
10,000 psig
.5”
10
C-3358-01
Subsea Ball Valve
2-way, 90 degree turn
10,000 psig
.375”
2.4
C-3443-01
Subsea Ball Valve
2-way, 90 degree turn
10,000 psig
.375”
2.4
C-1148-02
Subsea 2-Way Ball Valve
2-way/90 degree turn
10,000 psig
.500”
10
C-1925-01
Subsea Ball Valve
2-way/90 degree turn
10,000 psig
.375”
2.4
Barrior
Body
N/A
316
N/A
316
N/A
316
N/A
N/A
Stem
Trunnion
O-Ring
Connection Actuator Length Width Height
NA
3/8” NPT
N/A
3.54”
1.12”
1.12”
Alloy 725
Glass filled PTFE
3/8” MP
Handle
2.5”
1.75”
6.15”
Alloy 725
Glass filled PTFE
3/8” MP
Handle
6.56”
1.75”
6.4”
316
Alloy 725
Glass filled PTFE
1/2” NPT
Handle
3”
1.75”
7.15”
315
Alloy 725
Glass filled PTFE
1/4” NPT
Handle
2.5”
1.75”
6.15”
N/A
2507 SD
Alloy 725
Glass filled PTFE
1/4” HP
Handle
2.5”
1.75”
7.05”
N/A
316 annld
Alloy 725
Glass filled PTFE
1/2” NPT
Hex Cpling
3”
2.25”
9.76”
N/A
316 annld
Alloy 725
Glass filled PTFE
9/16” MP
Hex Cpling
5.5”
3”
11.19”
N/A
316 annld
Alloy 725
Glass filled PTFE
1/2” NPT
Hex Cpling
5.5”
3”
11.26”
N/A
316 annld
Alloy 725
GFLT 9131
1/2” NPT
ROV
5.906”
4.5”
9.29”
Single
316 annld
Inconel 725
Nitrile
1” MP
Handle
4.12”
2.25”
9.82”
N/A
316
Alloy 725
HNBR 2269
3”
2.25”
9.75”
316
Alloy 725
HNBR 2269
1/2” FNPT
3/4” MP x 1/2 FNPT”
Handle
Single
Handle
3.25”
2.25”
9.75”
Single
316 annld
Alloy 725
HNBR 2269
1/2” FNPT
Hex Cpling
3.5”
4.5”
11.19”
Single
316 annld
Alloy 725
HNBR 2269
1/2” FNPT
Hex Cpling
3.5”
4.5”
11.19”
Single
316
Monel K500
316
viton
Various
Handle
3.62”
1.75”
5.75”
Single
2507 SD
2507 SD
2507 SD
HNBR 2269
Various
ROV
5.75”
2.25”
6.86”
Single
2205 Duplex
Inconel 625
2507 Duplex
HNBR 2269
Various
ROV
3.62”
1.75”
5.36”
Single
316
Inconel 625
316
Nitrile
Various
Handle
3.62”
1.75”
7.75”
Single
316 annld
Inconel 625
316
Buna-N
Various
ROV
4”
2.37”
Single
316
Inconel 625
316
GFLT 9131
1/2” FNPT
Handle
4.12”
1.75”
6”
8.69”
Double
316 annld
Inconel 625
316
Nitrile
3/8” M/P
Handle
5.12”
2”
10.59”
Single
316
Inconel 625
316
Nitrile
3/4” MP
ROV
4.12”
1.75”
6.3”
Double
316 annld
Inconel 625
316
Nitrile
Various
ROV
5.12”
2”
7.86”
Single
316
Inconel 625
316
Nitrile
Socket weld
ROV
3.62”
1.75”
6.82”
Single
316
Inconel 625
316
EPDM
Socket weld
ROV
4.12”
1.75”
7.36”
Single
316
Inconel 625
316
Nitrile
Socket weld
ROV
3.62”
1.75”
6.82”
Single
316
Inconel 625
316
Nitrile
Socket weld
ROV
3.62”
1.75”
6.82”
Single
316
Inconel 625
316
Nitrile
Various
ROV
3.62”
1.75”
5.76”
Single
316
Inconel 625
316
Nitrile
Various
ROV
3.62”
1.75”
5.76”
Single
316
Alloy 625
316
Nitrile
Various
ROV
3.62”
1.75”
4.53”
Single
316 annld
Inconel 625
316
Nitrile
3/8” M/P
Blade Handle
3.62”
2.75”
6.8”
Single
316
Alloy 725
316
Buna-N
Various
Handle
4.12”
1.75”
5.62”
Single
2507 SD
Alloy 625
316
Nitrile
Various
Blade Handle
4”
2.75”
7.74”
Double
2205 SD
2507 SD
2507 SD
HNBR 2269
Various
ROV
5.12”
2.2”
6.73”
Single
316 annld
Inconel 625
Inconel 625
GFLT 9131
Various
Handle
3.62”
2.25”
7.75”
Double
2507 SD
Inconel 625
Inconel 625
GFLT 9131
Various
Handle
5.12”
2.25”
10.86”
Single
316
Inconel 625
316
Kalrez 4079
.5” Nipple
Blade Handle
3.62”
1.75”
9.18”
Single
316
Inconel 625
316
Nitrile
Various
ROV
4.12”
1.75”
5.86”
Single
316
inconel 625
316
Nitrile
Various
Handle
4.12”
1.75”
8.06”
Single
316
Inconel 625
316
Buna-N
Various
Handle
3.62”
1.75”
6.86”
Single
316
Alloy 625
316
Nitrile
Various
ROV
3.62”
1.75”
4.53”
Single
316
Inconel 625
316
Buna-N
Various
Handle
4.12”
1.75:
8.24”
Double
316 annld
Inconel 625
316
Nitrile
Various
Handle
5.12”
2”
10.59”
28
Additional Subsea Valves
2nd Item Number
Description
For more information, please contact factory.
Detail
MAWP
Orifice
CV
Ball Valves - 2-Way 90 Degree Turn
C-1949-01
2-Way Subsea Valve
2-way/90 degree turn
10,000 psig
.375”
2.4
C-3060-01
Subsea Valve
2-way, 90 deg turn
8,000 psig
.5”
10
C-2323-01
Subsea Valve
2-way, 90 deg turn
7,500 psig
.375”
3.4
C-2324-01
Subsea Valve
2-way, 90 deg turn
7,500 psig
.5”
10
C-2728-01
Subsea Valve
2-way, 90 deg turn
7,500 psig
.375”
3.4
C-2310-01
Subsea Ball Valve
2-way/90 degree turn
6,000 psig
.375”
2.4
C-2322-01
Subsea Valve
2-way, 90 deg turn
5,000 psig
.5”
10
C-2928-01
Subsea Valve
2-way, 90 deg turn
5,000 psig
0.61”
30
C-3396-01
2-Way Subsea Ball Valve
2-way, 90 degree turn
5,000 psig
.5”
10
Ball Valves - 3-Way 90 Degree Turn
C-3460-01
Subsea Ball Valve
3-way, 90 degree turn
15,000 psig
.375”
2.4
C-1958-01
3-Way Subsea Valve
3-way, 90 degree turn
10,000 psig
.375”
2.4
C-1980-02
Subsea 3-Way Ball Valve
3-way, 90 degree turn
10,000 psig
.5”
10
C-2046-01
Subsea Ball Valve
3-way, 90 degree turn
10,000 psig
.375”
2.4
C-2336-01
Subsea Ball Valve
3-way, 90 degree turn
10,000 psig
.5”
10
C-2345-02
Subsea Ball Valve
3-way, 90 degree turn
10,000 psig
.469”
9.4
C-2641-01
3-Way Subsea Ball Valve
3-way, 90 degree turn
10,000 psig
.375”
2.4
C-2969-01
Subsea Valve
3-way, 90 degree turn
10,000 psig
.312”
2
C-3062-01
Subsea Ball Valve
3-way, 90 degree turn
10,000 psig
.375”
2.4
C-3238-01
Subsea Valve
3-way, 90 degree turn
10,000 psig
.28”
1.4
C-3435-02
Subsea Ball Valve
3-way, 90 degree turn
10,000 psig
.469”
9.4
C-3428-02
Subsea Ball Valve
3-way, 90 degree turn
5,000 psig
.5”
7.5
3-way Ball Valve, 180 deg turn
10,000 psig
.375”
2.4
Ball Valves - 3-Way 180 Degree Turn
3-Way Ball Valve
C-1838-01
C-2556-01
3-Way Subsea Ball Valve
3-way, 180 deg turn
10,000 psig
.375”
2.4
C-3208-02
Subsea Ball Valve Assembly
3-way, 180 deg turn
10,000 psig
.5”
10
C-3512-02
Subsea Ball Valve Assembly
3-way, 180 deg turn
10,000 psig
.5”
10
C-3439-02
Subsea Ball Valve
3-way, 180 deg turn
8,000 psig
.469”
9.4
Ball Valves - 4-Way 90 Degree Turn
C-1166-01
4-Way Subsea Ball Valve
4-way/90 deg turn
10,000 psig
.375”
2.4
C-1803-01
4-Way Subsea Ball Valve
4-way/90 deg turn
10,000 psig
.375”
2.4
C-1900-01
4-Way Subsea Ball Valve
4-way/90 deg turn
10,000 psig
.125”x.375”
1.2
C-1971-01
4-Way Subsea Ball Valve W/O Adapters
4-way/90 deg turn
10,000 psig
.344”
0.12
C-2041-01
Subsea Ball Valve
4-way/90 deg turn
10,000 psig
.375”
2.4
C-2134-02
Ball Valve
4-way/90 deg turn
10,000 psig
.375”
2.4
C-2148-01
Subsea Valve
4-way/90 deg turn
10,000 psig
.28”
1.4
C-2378-01
Subsea Ball Valve
4-way/90 deg turn
10,000 psig
.375”
2.4
C-2466-01
Subsea Valve
4-way/90 deg turn
10,000 psig
.28”
1.4
C-2485-01
Subsea Valve
4-way/90 deg turn
10,000 psig
.28”
1.4
C-3474-01
4-Way Subsea Ball Valve
4-way/90 deg turn
10,000 psig
.375”x.125”
1.2
C-3487-01
Subsea Ball Valve
4-way/90 deg turn
10,000 psig
.375”x.125”
1.2
5-way, 180 degree turn
10,000 psig
.375”
2.4
Ball Valves - 5-Way 180 Degree Turn
C-2136-01
29
Subsea Ball Valve
Barrior
Body
Stem
Trunnion
O-Ring
Connection Actuator Length Width Height
Single
316
Inconel 625
316
Nitrile
Various
Handle
3.62”
1.75”
5.76”
Single
316 annld
Inconel 625
316
Buna-N
Various
ROV
4”
2.37”
6”
Single
316
Inconel 625
316
Kalrez 4079
.5” Nipple
ROV
3.62”
1.75”
9.18”
Single
316
Inconel 625
316
Kalrez 4079
.75” Nipple
ROV
4.12”
1.75”
9.72”
Single
316
Inconel 625
316
Kalrez 4079
.5” nipple
Blade Handle
3.62”
1.75”
9.18”
Single
316
Inconel 625
316
Nitrile
Various
Handle
3.62”
1.75”
7.63”
Single
316
Inconel 625
316
Kalrez 4079
1” Nipple
Handle
4.12”
1.75”
9.72”
Single
2205 Duplex
Inconel 625
2507 Duplex
Nitrile
Various
ROV
5.25”
3.5”
7.81”
Single
316 annld
Inconel 625
2507 Duplex
HNBR 2269
3/4” M/P
Blade Handle
4.12”
1.75”
9.72”
Single
316
Inconel 625
316
Nitrile
1/4” FNPT
ROV
3.62”
3.62”
6.1”
Single
316
Inconel 625
316
Nitrile
Various
Handle
3.62”
1.75”
6.38”
Single
316
Inconel 625
316
Nitrile
Various
ROV
4.12”
1.75”
7.17”
Single
316
Inconel 625
316
Buna-N
Various
ROV
3.62”
1.75”
6.10”
Single
316
Inconel 625
316
Nitrile
1” FNPT
ROV
4.12”
1.75”
7.36”
Single
316 annld
Inconel 625
Inconel 625
GFLT 9131
Various
Handle
4”
2”
8.25”
Single
316 annld
Inconel 625
316
Nitrile
Various
Handle
4”
4”
7.35”
Single
316 annld
Inconel 625
Inconel 625
HNBR 2269
Various
Blade Handle
3.62”
2.75”
6.8”
Single
316
Inconel 625
316
Nitrile
3/8” MP
ROV
3.62”
1.75”
9.12”
Single
316 annld
Inconel 625
316
Buna-N
3/8” FNPT
ROV
4”
4”
5.79”
Single
2507 duplex
Inconel 625
316
Nitrile
Various
Handle
4”
2”
8.25”
Single
316 annld
Inconel 625
316
Buna-N
Various
ROV
4”
2.37”
6”
Single
316 annld
17-4 PH
316
viton
Various
Handle
4”
4”
5.12”
Single
316 annld
Inconel 625
316
Nitrile
Various
Handle
4”
4”
7.35”
Single
2205 Duplex
Alloy 625
2507 Duplex
HNBR 2269
Various
ROV
4”
2”
7.57”
Single
2205 Duplex
Inconel 625
316
HNBR 2269
Various
ROV
4”
2”
5.57”
Single
316 annld
Inconel 625
316
Nitrile
Various
ROV
4”
2.38”
8.61”
Single
316 annld
Monel K500
316
Nitrile
Various
Handle
4”
4”
8.1”
Single
316 annld
Inconel 625
316
Buna-N
Varous
ROV
4”
4”
5.71”
Single
316 annld
Inconel 625
316
Buna-N
Various
ROV
4”
4”
5.71”
Single
316 annld
Inconel 625
316
Nitrile
Various
ROV
4”
4”
5.71”
Single
316 annld
Inconel 625
316
Buna-N
Various
ROV
4”
4”
5.42”
Single
316 annld
17-4 PH
316
GFLT 9131
Various
Handle
4”
4”
5.12”
Single
316 annld
Inconel 625
316
Buna-N
1/4” FNPT
ROV
4”
4”
5.42”
Single
316 annld
Inconel 625
316
Buna-N
1/4” FNPT
ROV
4”
4”
5.42”
Single
316 annld
Inconel 625
316
Buna-N
3/8” FNPT
ROV
4”
4”
5.72”
Single
316 annld
Inconel 625
316
Buna-N
3/8” FNPT
ROV
4”
4”
5.58”
Single
316 annld
Inconel 625
316
Buna-N
Various
ROV
4”
4”
5.71”
Single
316 annld
Inconel 625
316
Buna-N
Various
ROV
4”
4”
4.47”
Single
316 annld
Inconel 625
316
Nitrile
Various
ROV
4”
4”
5.36”
30
BuTech Sales & Engineering Office
Tel: 814-833-4904
Email: [email protected]
www.butech-valve.com
Haskel International, Inc.
100 East Graham Place
Burbank, CA 91502 USA
Tel: 818-843-4000
Fax: 818-556-2549 or 818-841-4291
Email: [email protected]
www.haskel.com
Q05225
EMS511920
Haskel Europe Ltd.
Q05225
EMS511920
North Hylton Road
Sunderland SR5,3JD, England, UK
Tel: 44-191-549-1212
Email: [email protected]
www.haskel-europe.com
Haskel Middle East
Hamilton Sundstrand Industrial
P.O. Box 262384 Jebel Ali, Dubai, United Arab Emirates
Tel: 971-4886-2686
Fax: 971-4886-2684
Email: [email protected]
www.haskel.ae
Haskel Asia
Hamilton Sundstrand Singapore Industrial Pte. Ltd.
23 Tagore Lane, #03-06 Tagore 23 Warehouse Complex
Singapore 78760
Tel: 65-6455-7559
Fax: 65-6455-2841
Email: [email protected]\
www.haskel.com.sg
Haskel China
Hamilton Sundstrand Industrial (Shanghai) Co Ltd.
Building 1, No. 879 Shen Fu Road
Shanghai, China 20108
Tel: 86-21-6121-1600
Fax: 86-21-5442-7706
Email: [email protected]
www.hsis.com.cn