Specification sheet LX885
Transcription
Specification sheet LX885
LORO-roof drainage systems Specification sheet LX 885 Specification sheet LX 885 Roof drainage systems made of aluminium, Series O Main drainage Gravity flow Silent Power Discharge rate: 4,6 l/sec Water height: 35 mm Roof penetration: Diameter: DN 100 LX-Number: LX 885 Weir height: 0 mm Drain:ventilated Downpipe: not ventilated Downpipe height: Drainage: in sewer - LX 885 Piece list 1 x Art-Nr. 05510.100X, LORO-X Stand pipe 4 x Art.-Nr. 00911.100X, LORO-X Sealing element 1 x Art.-Nr. 00986.000X, LORO-X Lubricant 1 x Art.-No. choose drain on page two! 1 x Art.-Nr. 01201.100X, LORO-X Pipe with one socket 1 x Art.-Nr. 00300.100X, LORO-X Bend 1 x Art.-Nr. 01001.100X, LORO-X Pipe with one socket CAD Water height h [mm] hQ - Head Discharge curve Discharge Q [l/sec] Systemshape Systempower Water height mm Discharge l/sec 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 1,0 1,6 2,3 3,2 3,9 4,6 5,4 6,4 7,4 8,1 8,6 9 9,4 9,9 Silent Power DATENBLATT LX885 ENG 1 LORO-roof drainage systems Specification sheet LX 885 Choose drain for piece list on page one! DN 100 without thermal insulation 500 ø330 ø260 ø220 3° 165 ø147 ø102 116 36 2 105 90 min. 40 max. 180 105 90 500 ø330 ø260 ø220 ø147 240 ø102 116 Series O two-piece connection sleeve 3° Series O one-piece connection sleeve 36 2 LX885-6X Drain Art.-No. 17132.100A 165 LX885-5X Drain Art.-No. 17131.100A 240 with thermal insulation Drain Art.-No. 17145.100A Drain Art.-No. 17146.100A Series O one-piece connection sleeve Series O two-piece connection sleeve 500 ø330 ø260 ø220 105 90 ø147 200 165 36 2 min. 40 max. 180 3° ø147 ø102 116 2 200 165 36 105 90 500 ø330 ø260 ø220 ø102 116 LX885-8X 3° LX885-7X 240 325 256 240 325 256 with thermal insulation and heating Series O two-piece connection sleeve 500 ø330 ø260 ø220 105 90 240 325 256 200 165 min. 40 max. 180 3° ø147 ø102 116 2 200 165 36 105 90 500 ø330 ø260 ø220 ø147 ø102 116 Series O one-piece connection sleeve 3° LX885-10X Drain Art.-No. 17148.100A 36 2 LX885-9X Drain Art.-No. 17147.100A 240 325 256 Heat tracing: Lorowerk recommends to check all drains and pipes with regard to their frost-sensibility. Where necessary, these parts should be upgraded with heat tracing. DATENBLATT LX885 ENG 2