spreaders cutters combination tools rams power units pto systems

SPREADERS
CUTTERS
COMBINATION TOOLS
RAMS
POWER UNITS
PTO SYSTEMS
HOSE REELS
ROPE RESCUE SYSTEM
CONTROL VALVE LOCATION
WHAT SETS US
APART ?
We are up-front and user friendly!
AMKUS locates the control valve parallel to the cylinder. This compact
design allows the operator to place the tool where they need it to
effectively do the job.
• Length of the tool- The wrap around design of our control valve
allows the operator to access cuts in tight spaces and rotate the
valve out of harm’s way.
• Balance- The control valve location allows the user to share the
weight of the tool between two hands versus one. This feature is
critical when using more substantial cutters like the AMK-22.
• Hand position- An operator’s hands stay in sight at all times with the
AMKUS control valve which is important as the tools move during
operation. Tools with the control valve located at the end of the tool
put your hands out of sight and into a compromising position. Our
tools can be rotated 180 degrees to move the valve away from
potential pinch points allowing the operator to make the desired cut.
A valve located at the end of the tool limits the user and forces a
change in the angle of the cut or a change in technique altogether.
• Easy turn control valve- Our valve is easy to turn and uses the large
muscle groups of the forearm for less fatigue.
ROTATING HANDLE CUTTER
Others have tried it, we’ve perfected it!
• Rescuers waste valuable energy repositioning their hands on a cutter handle. The unique 360 degree rotating handle
found on our Model AMK-21A and AMK-22 Cutters gives the user the ability to change the position of the tool without
having to let go of the handle. Repositioning requires minimal effort without your hand ever leaving the handle.
SPREADER DESIGN
Ours is different! Here’s why:
• Rack and pinion drive- The design of our AMK-24, AMK-30CX and
AMK-30CRT Spreaders provides a more consistent spreading force
from start to finish. Other spreader designs give you maximum
spreading force at the end of the spread and minimum at the
beginning- the point at which you need maximum force.
• Angle of maximum spread- The low angle at maximum spread
gives you usable surface area on the tips. Other designs open to a
more severe angle reducing tip surface contact area and pulling the
tool into the work area. Our tips remain parallel to the cylinder
throughout the spread allowing them to stay in contact with the
material continuously for maximum spread (helps avoid piercing
with the tips).
• Extended Reach Tips (ERT) in conjunction with our standard tips
give the rescuer more options for techniques such as lifting the
dash/steering column, etc.
SUBSTANTIAL RAM BASE
We support you!
AMKUS uses a large ram base to spread the load over a larger area.
The large ram base provides a solid support for pushing, which prevents
tearing into the material and eliminates the need for additional
equipment such as a rocker or ram support.
WHAT SETS US APART?
AMKUS builds tools for vehicle rescue. We don’t build equipment just to meet a
standard or to provide something similar to the competition. We build the best
equipment possible to help rescuers do their job.
ABOUT US
AMKUS Rescue Systems has been providing state-of-the-art hydraulic
extrication equipment and rescue systems to Departments around the
world for over 35 years. AMKUS is proud to be certified as an ISO
9001 company. We have designed tools to meet industry standards
including NFPA 1936 and the European Norm 13204.
AMKUS uses advanced engineering software, the finest materials and
components available, the latest CNC machining centers and highly
skilled craftsmen to manufacture our superior rescue systems. We are
continually improving existing products and introducing new innovative
tools to make extrications safer, faster and easier to perform.
AMKUS, INC.
2700 Wisconsin Ave.
Downers Grove, IL USA 60515-4226
PH: 1-800-592-6587 PH: 630-515-1800
FAX: 630-515-8866
Email: [email protected]
www.amkus.com
•
AMKUS is an American owned and American operated company.
•
The AMKUS factory for the world is located in Downers Grove,
IL (about 30 miles outside Chicago). We welcome our
customers to stop in for a tour and see AMKUS equipment
being made.
•
Rescue System Supplier of
•
Rescue System of choice for
and
STANDARD COUPLING
Standard Couplings have a locking collar to
prevent accidental uncoupling. Pulling back on
the collar allows the coupler to receive the male
coupler for a positive connection to the hydraulic
supply hoses.
ABOUT US
COUPLINGS, HYDRAULIC FLUID AND
MOUNTING BRACKETS
MONO COUPLING
Rescuers must make quick and efficient connections. The Mono
Coupling allows connecting and disconnecting of tools while the
line is under flow (in most cases it’s not necessary to place the
directional control of the power unit in the neutral position). The
Mono Coupling can convert standard AMKUS twin line hoses into a
single connection allowing customers to retrofit existing AMKUS
Rescue Tools.
MINERAL BASE
HYDRAULIC FLUID
MOUNTING
BRACKETS
All AMKUS Rescue Systems use AMKUS
MV-1 Mineral Base Hydraulic Fluid, a
quality anti-wear multi-viscosity mineral
base hydraulic fluid.
AMKUS offers individual
mounting brackets for each
model of equipment. The tool
can be positioned vertically or
horizontally. The tool will sit in
a molded base plate and a
rubber strap securely holds the
tool to prevent shifting around
the compartment.
•
•
•
•
•
High flash point
High lubricity
Non-irritant
Does not suspend dirt
Consistent over a wide range
of temperature
SPREADERS
AMK-24 SPREADER
The AMK-24 Spreader is a remarkably compact and
lightweight (just 37.35 lbs., ready to use) high
performance rescue tool. Its small footprint creates
more free space in the truck without sacrificing
power at the scene! The intelligent valve placement
and ergonomic handle design create excellent
balance, simplifying positioning and operation.
•
•
Certified Model NFPA 1936, 2010 edition
EN13204 Designation: AS33/609-17.0
• Removable tips to accept chain package and
Extended Reach Tips
• Innovative push button pins for easy removal of
tips (ELIMINATES POSSIBILITY OF LOSING PINS
IN THE FIELD!)
• 24” of spread with up to 32”
of spread with Extended Reach Tips
AMK-30CX
SPREADER
AMK-28
SPREADER
This proven spreader is the lightest
weight full size spreader available.
• 28” of spread
• 53,300 lbs. of spreading force
• Design helps avoid piercing
with the tips
• Tips stay in contact with the
material continuously for
maximum spread
AMKUS Spreaders offer excellent balance and tip contact throughout the whole
spread which helps avoid piercing with the tips.
AMK-30CRT SPREADER
SPREADERS
Tackle your next extrication with the AMK-30CRT
Spreader. The natural hand placement and
excellent balance aids the rescuer in their mission.
Add Extended Reach Tips for up to 40” of spread in
an instant!
• 32” of spread
• Optional Extended Reach Tips increase
the spread up to 8 inches!
• Control valve placement provides
compact design allowing greater
access for the user
RACK AND PINION DRIVE
The AMK-24, AMK-30CX, and
AMK-30CRT Spreaders use a rack
and pinion drive that provides a more
consistent spreading force from start
to finish. Other spreader designs give
you maximum spreading force at the
end of the spread and minimum at
the beginning - the point at which you
need maximum force.
EXTENDED
REACH TIPS
Extended Reach Tips for the AMK24 and AMK-30CRT Spreaders
provide an additional 8 inches of
spread in an instant. The unique
construction of these tips eliminates
loss of power while providing
extended reach and the push
button pins eliminate losing pins in
the field.
QUICK ADJUST
CHAIN PACKAGES
AMKUS offers Quick
Adjust Chain Packages
for each spreader
CUTTERS
AMK-22 CUTTER
New car technology is no match for the AMK-22
Cutter. With over 200,000 lbs. of cutting force the
AMK-22 Cutter is your answer to cutting boron
and other ultra-high strength steels used in
today’s vehicles.
•
•
Certified Model NFPA 1936, 2010 edition
EN13204 Designation: AC127F-20.9
• Unique 360 degree rotating handle
ROTATING HANDLE
Visit www.amkus.com to see it in action!
Others have tried it, we've perfected it.
Rescuers waste valuable energy
repositioning their hands on a cutter
handle. The unique 360 degree rotating
handle found on our Model AMK-21A and
AMK-22 Cutters gives the
user the ability to
change the position of
the tool without having
to let go of the handle.
Repositioning requires
minimal effort without your
hand ever leaving the handle.
AMK-25
HEAVY DUTY CUTTER
AMK-25E
SPEEDWAY CUTTER
• Blade design pulls material into
the most powerful point of the cutter.
We are honored to be the Rescue
System Supplier of NASCAR and
our high performance rescue tools
are also used by ARCA, IMSA and
many racetracks across the
country. The AMK-25E was
originally designed for racing but
lends itself to everyday vehicle
rescue.
With thousands in use worldwide, this
extremely compact and versatile cutter’s
proven design is still capable of cutting
today’s cars.
Control valve placement provides compact design
allowing greater access for the user. All cutters have
excellent balance and natural hand placement.
AMK-21A CUTTER
The AMK-21A delivers the cutting power (over
100,000 lbs. of cutting force) needed for extrication
in a remarkably compact package and is NFPA
1936 compliant.
•
Certified Model NFPA 1936,
2010 edition
CUTTERS
•
EN13204 Designation: AC132D-15.9
• Unique 360 degree rotating handle
AMK-25S
WIDE OPENING CUTTER
AMK-25P
CABLE CUTTER
• Special application cutter
• Special application cutter
This wide opening (6.5” at center)
special application cutter tackles pipe,
angle and channel cutting operations.
The AMK-25P offers a unique blade
design for use in special
applications such as cable or chain.
All Model 25 Series
cutters are available
with the standard
handle or the optional
D-ring handle.
COMBINATION TOOLS
AMK-25C COMBINATION TOOL
Combination tools provide the versatility of
spreading and cutting with the same tool.
The AMK-25C Combination Tool is an extremely lightweight tool for first
response applications.
• Combination cutting/spreading/pulling tool
• Extremely lightweight, compact size for easy storage
AMK-C15
COMBINATION TOOL
The AMK-C15 Combination Tool provides the
versatility of a combination tool with a
stronger spreading force.
• Ideal for first response applications
• Versatility in a compact, lightweight size
FIRST RESPONSE
PACKAGE
RAMS & RAM ACCESSORIES
PUSH-PULL RAMS
AMKUS offers 4 different sizes of rams to accommodate all your
extrication needs. Our unique base design distributes the load
providing a stable base that does not shift or tear through material.
• Push/pull design allows
use of chain packages
• The Ram Accessory Kit offers a
conical point head, claw attachment
and a 10” extension that can be used on
all AMKUS rams.
COMBINATIONS TOOLS & RAMS
• Check valve design
maintains the load
ROPE RESCUE SYSTEM
THE AMKUS ROPE
RESCUE SYSTEM (ARRS)
The advanced design deploys in under two minutes,
eliminating pulley systems and load releasing hitches while
greatly reducing the number of rescuers needed topside from
8-10 to just two! It is easy to use, requiring less training than
traditional rope rescue methods thanks to the incredibly
simple design.
• Sets up in under 2 minutes
• Rope automatically aligns with the direction
of the load
• Precision control allows a load to
be raised and lowered a fraction
of an inch at a time for critical
precision lifting
• Reduces the number of
rescuers needed topside
(2 people can do the
work of approximately
8-10 people)
• 1,000 lb. working capacity with 10:1 safety
margin
VISIT WWW.AMKUS.COM
TO SEE THIS SYSTEM IN
ACTION!
GPK1 GIN POLE KIT
The GPK1 Gin Pole Kit
available for the ARRS
includes a 6-10 ft.
telescoping gin pole, gin
pole head, gin pole
mounting bracket, locking
carabiners, etc.
MANUAL/AUXILIARY PUMPS
HP101-STD HAND PUMP
• Two-stage pump design
• Capable of operating all AMKUS equipment
A101-STD FOOT PUMP
• May be used with SCBA cylinders
• Excellent for haz-mat operations
ROPE RESCUE & MANUAL/AUXILIARY PUMPS
• Ideal for hazardous environments
SIMULTANEOUS POWER UNITS
SIMULTANEOUS POWER
UNITS
Simultaneous power units allow two tools to be connected and
operated simultaneously. Speed and power are not affected if
both lines are operating simultaneously! All AMKUS power units
are available with a carrying handle or roll cage
with hose loop for storage.
•
•
Certified Model NFPA 1936, 2010 edition
EN13204 Designation: MTO
• Gas or electric models available.
Briggs & Stratton™ or Honda™
engines available for
gas models
• Electric units (Model EF2S) are
220/240 volt single phase
• Can be ordered without roll cage
for mounting purposes
GH2S2-XL
GB2S-XLO
EF2S
MINI PUMP
MINI PUMPS
AMKUS mini pumps offer two tool alternate operation in a
compact package. Our Honda™ engine mini pump is available
with a roll cage or a carrying handle.
•
•
Certified Model NFPA 1936, 2010 edition
EN13204 Designation: ATO
POWER UNITS
• Less than 70 lbs.
GH2A-MC
GH2A-MCH
240SS SYSTEM
240SS SUPERSIMO
The 240SS provides 240v single phase power with superior
performance. This unit operates two tools simultaneously and has
unequalled performance in the industry!
• Use long hose lengths without any loss of speed or power
• Can be used with hose lengths up to 200’
• Requires only about 5 amps at start up with virtually no inrush
Advanced technology LED display assists in
system trouble shooting.
ULTIMATE SYSTEM
The first PTO driven system in the industry and still nothing compares
to the Ultimate.
AMKUS ULTIMATE SYSTEM
The AMKUS Ultimate System is a PTO driven hydraulic rescue system
that provides superior performance with maximum versatility! Don’t
settle for any PTO system, the AMKUS Ultimate System is the only one
that provides the SPEED and POWER for up to SIX Tools!
VISIT WWW.AMKUS.COM
TO SEE THIS SYSTEM IN
ACTION!
• Operates up to 6 AMKUS
tools simultaneously
• Operates hydraulic
generator
• Operates low pressure
tools such as ventilation
fans, chainsaws and other
low pressure tools
• At the scene control with
the Ultimate’s pendant
control system
240SS/ULTIMATE
• Use long hose lengths
without any loss of speed
or power
• Pre-connected tools allow
your personnel to “grab
and go”
WIRELESS ULTIMATE
CONTROLLER KIT
4 or 8 button controller kit available.
• Operational up to 300’ from receiver
• Control operator has freedom of movement with no constricting tether to the
fire apparatus
• Emergency stop quickly shuts off the system
• Advanced controls- Ultra fast, safe, precise and error-free encoding and
decoding- Over one million unique ID codes
HOSE REELS
HOSE REELS
AMKUS offers manual and electric rewind hose
reels with 50’ and 100’ of hose. We also offer
reels with up to 200’ of hose for use with our
mounted systems.
• Hoses available in red, blue,
black or yellow
• Optional Roller Guide Assembly
available
• AMKUS reels provide a collar that
protects the crimp from breaking
or leaking
• The motor on AMKUS hose
reels can be mounted in four
different locations (each corner
of the reel) for convenience
and space saving options
• Reinforced drum eliminates
the need to remove all the hose
from the reel before charging
the line
• Internal reinforcement prevents
the drum from collapsing
To save compartment
space, the electric
motor can be placed
on any corner of the
reel to allow for
nesting of hose reels in
a compartment.
The hose crimp
protector prevents
damage to the crimp
when the hose builds
pressure. This feature
allows the user to pull
only the amount of
hose needed off the
reel instead of the
entire amount of hose.
AMKUS, INC.
2700 Wisconsin Ave. Downers Grove, IL 60515-4226
PH: 630-515-1800 • FAX: 630-515-8866
Email: [email protected]
www.amkus.com