docTapelight - Tokistar Lighting
download 
Report Transcription
Tapelight - Tokistar Lighting
Tapelight TOKISTAR TOKISTAR LIGHTING Tapelight Systems Various light sources, including highly efficient LEDs, create a wide range of dramatic lighting effects. LEDs and incandescent lamps operate from low-voltage power supplies and both light sources are easily replaceable. The result is a safe and energyefficient lighting system, looking perfect every day of the year. F or over 40 years, Tapelight products by Tokistar ® have provided accent lighting effects in hotels, casinos, residences and many other applications. These versatile products feature low-profile flexible cables, enabling our Tapelight to fit in small niches and conform to any shape. Full dimming of LEDs and incandescent lamps gives you complete lighting control. LS Series provides a distinctive accent to this building exterior. TLP Tapelight creates indirect highlights on this restaurant ceiling. Several LED Choices for greatest efficiency. Polycarbonate Sockets are soldered and bonded to cables. TLW Series adds motion and excitement to this casino environment. Contents Flexible Conductor easily conforms to any shape. LS Tapelight beneath cantilevered steps safely illuminates these exterior stairs. Tapelight Systems | 2-3 Silicone Caps provide all-environment protection. Light Sources | 4-5 TLP Series | 6-7 LS Series | 8-9 Light Sources are easily replaced. TLW Series | 10-11 Accessories | 12-13 LED Drivers / Dimmers | 14 Transformers | 15 Cover: Tapelight with LEDs under the floor tiles creates a lighted pathway. 2 | TOKISTAR LIGHTING Parallel Wiring so Tapelight may be cut to size on site. TOKISTAR LIGHTING | 3 TokiLeds ® P4 LEDs TokiLeds TokiLeds are the most durable and energy efficient of all our light sources. Their unique phosphor-colored lens reflects light in all directions, resulting in fullrange viewing. Part Number LED Color Watts/Volts Amps TLED-WW TLED-IW TLED-WH TLED-WW-HB TLED-IW-HB TLED-WH-HB TLED-WW-UB TLED-IW-UB TLED-WH-UB TLED-AM TLED-BL TLED-GR TLED-MG TLED-PL TLED-RD 2400K White 3000K White 6500K White 2400K White 3000K White 6500K White 2400K White 3000K White 6500K White Amber Blue Green Magenta Purple Red 0.1 W / 8 VDC 0.1 W / 8 VDC 0.1 W / 8 VDC 0.2 W / 8 VDC 0.2 W / 8 VDC 0.2 W / 8 VDC 0.4 W / 8 VDC 0.4 W / 8 VDC 0.4 W / 8 VDC 0.1 W / 8 VDC 0.1 W / 8 VDC 0.1 W / 8 VDC 0.1 W / 8 VDC 0.1 W / 8 VDC 0.1 W / 8 VDC 12.5 mA 12.5 mA 12.5 mA 25.0 mA 25.0 mA 25.0 mA 50.0 mA 50.0 mA 50.0 mA 12.5 mA 12.5 mA 12.5 mA 12.5 mA 12.5 mA 12.5 mA P4 Series LEDs do a remarkable job of indirect lighting by focusing a more concentrated amount of light on the reflective surface. For interior applications of indirect lighting, our P4 LEDs are both energy efficient and cost effective. P4 LEDs Part Number Color Watts/Volts Amps PLED-IW PLED-WH PLED-AM PLED-BL PLED-GR PLED-RD 3000K White 6500K White Amber Blue Green Red 0.24 W / 8 VDC 0.24 W / 8 VDC 0.24 W / 8 VDC 0.24 W / 8 VDC 0.24 W / 8 VDC 0.24 W / 8 VDC 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA Select from a wide range of vibrant colors. Green: X=0.16 Y=0.74 White: X=0.31 Y=0.29 By combining different colors of LEDs on the same fixture, a wide range of blended colors can be created. Incandescent White: X=0.45 Y=0.41 White TokiLeds do an outstanding job of emulating true incandescent light. Our selection includes a variety of color temperatures and brightness levels. Warm White: X=0.51 Y=0.41 Amber: X=0.565 Y=0.43 Red: X=0.695 Y=0.30 2400K Warm White 3000K Incandescent White Magenta: X=0.37 Y=0.16 6500K White Incandescent Lamps Purple: X=0.21 Y=0.06 Blue: X=0.13 Y=0.067 Kinetic TokiLeds Kinetic TokiLeds include a microchip to create selfactuated flashing or cross-fading effects. Each LED operates independently for a totally random appearance. Kinetic TokiLeds do not require a controller, adding to the system’s cost efficiency and reliability. They may also be mixed with static LEDs on the same fixture. Traditional incandescent lamps are still a popular choice for many applications. These long-life lamps are available in a choice of brightness levels, and are easily replaceable. FADING B R I G H T N E S S Kinetic TokiLeds Part Number Effect Color Watts/Volts KLED-FF KLED-SF KLED-CF Fast Flash / 4 Hz Slow Flash / 0.5 Hz Cross-Fade 3000K White 3000K White 3000K White 0.2 W / 8 VDC 0.2 W / 8 VDC 0.2 W / 8 VDC ELAPSED TIME Flashing FLA SHING F A Fading DING B R I G H T N E S S B R I G H T N E S S ELAPSED TIME ELAPSED TIME For twinkling effects, the cycle is 0.5 Hz. For faster scintillating effects, the cycle is 4 Hz. Cross-Fading LEDs smoothly ramp up to full brightness, and gradually fade to off. 4 | TOKISTAR LIGHTING FLASHING B R I G H T Part # TB-101a TB-105a TB-106a TB-101 TB-105 TB-106 BB-301 Watts 0.9 1.8 2.8 0.9 1.8 2.8 0.8 Volts 24 24 24 24 24 24 24 Lumens 1.8 3.8 12.0 1.8 3.8 12.0 1.8 TB-105a Kelvin 2000K 2000K 2200K 2000K 2000K 2200K 2150K Life (Hrs.) 15,000 10,000 5,000 15,000 10,000 5,000 10,000 TB-105 For outdoor applications, our “a” series lamps with protective flange provide all-weather protection. TOKISTAR LIGHTING | 5 TLP Series TLP - 80 - WW How to Specify Socket Spacing After selecting the most suitable light source for the application, refer to one of these charts with TokiLeds, P4 LEDs, or Incandescent Lamps. TLP Series has set an industry standard for interior accent lighting since its introduction. Lamp sockets are soldered and bonded to highly flexible PVC cables for long-term reliability, and fixtures can be trimmed on site for a precise fit. Code Inches (mm) Code Color Style Watts/Volts 30 50 80 100 150 1.2” (30 mm) 2.0” (50 mm) 3.0” (80 mm) 4.0” (100 mm) 6.0” (150 mm) WW IW WH WW-HB IW-HB WH-HB WW-UB IW-UB WH-UB 2400K White 3000K White 6500K White 2400K White 3000K White 6500K White 2400K White 3000K White 6500K White Standard Standard Standard High Brightness High Brightness High Brightness Ultra-Bright Ultra-Bright Ultra-Bright 0.1 W / 8 VDC 0.1 W / 8 VDC 0.1 W / 8 VDC 0.2 W / 8 VDC 0.2 W / 8 VDC 0.2 W / 8 VDC 0.4 W / 8 VDC 0.4 W / 8 VDC 0.4 W / 8 VDC AM BL GR MG PL RD Amber Blue Green Magenta Purple Red Standard Standard Standard Standard Standard Standard 0.1 W / 8 VDC 0.1 W / 8 VDC 0.1 W / 8 VDC 0.1 W / 8 VDC 0.1 W / 8 VDC 0.1 W / 8 VDC KLED-FF KLED-SF KLED-CF 3000K White 3000K White 3000K White Fast Flashing Slow Flashing Cross-Fading 0.2 W / 8 VDC 0.2 W / 8 VDC 0.2 W / 8 VDC The next step is to select the appropriate socket spacing. For indirect applications, closer spacing provides the most uniform wash of light. Intermediate and wider socket spacing is the best choice for accenting objects with distinct points of light. In exposed applications, TLP Tapelight highlights architectural features with distinct points of light. As an indirect light source from concealed areas, it produces stylish and subtle accents on reflective surfaces. TokiLeds TLP - 80 - P4IW Socket Spacing TLP - 80 - 101 Socket Spacing P4 LEDs Code Inches (mm) Code Color Watts/Volts Code 30 50 80 100 150 1.2” (30 mm) 2.0” (50 mm) 3.0” (80 mm) 4.0” (100 mm) 6.0” (150 mm) P4IW P4WH P4AM P4BL P4GR P4RD 3000K White 6500K White Amber Blue Green Red 0.24 W / 8 VDC 0.24 W / 8 VDC 0.24 W / 8 VDC 0.24 W / 8 VDC 0.24 W / 8 VDC 0.24 W / 8 VDC 30 50 80 100 150 Incandescent Inches (mm) Code 1.2” (30 mm) 2.0” (50 mm) 3.0” (80 mm) 4.0” (100 mm) 6.0” (150 mm) 101 105 Watts/Volts 0.9 W / 24 VAC 1.8 W / 24 VAC Sizes and Lengths TokiLed Specifications Light Sources include incandescent lamps and LEDs Polycarbonate Sockets with flammability rating UL 94V-0 TokiLed-UB .48” (12 mm) TB-101 .79” (20 mm) .70” (18 mm) .67” (17 mm) P4-LED .86” (23 mm) .67” (17 mm) .48” (12 mm) .48” (12 mm) TB-105 .48” (12 mm) .48” (12 mm) Flexible Conductors are plated copper and rated 6.5 amps Sockets are soldered and ultrasonically bonded to cable Insulation is flexible PVC with flammability rating UL 94 HB LED Fixture Length To minimize voltage drop and keep conductors safely within their rating, do not exceed the maximum lengths shown for each independent length of Tapelight. Incandescent Spacing 0.1 Watt 0.2 Watt 0.24 Watt 0.4 Watt 0.9 Watt 1.8 Watt 1.2” (30 mm) 2.0” (50 mm) 3.0” (80 mm) 4.0” (100 mm) 6.0” (150 mm) 32’ (9.8 M) 41’ (12.5 M) 52’ (16.0 M) 58’ (17.8 M) 71’ (21.6 M) 20’ (6.0 M) 31’ (9.5 M) 39’ (12.0 M) 43’ (13.1 M) 53’ (16.2 M) 16’ (5.0 M) 27’ (8.3 M) 35’ (10.7 M) 39’ (11.9 M) 48’ (14.6 M) 10’ (3.0 M) 16’ (5.0 M) 25’ (8.0 M) 30’ (9.0 M) 35’ (10.7 M) 17’ (5.1 M) 22’ (6.7 M) 28’ (8.5 M) 32’ (9.8 M) 40’ (12.2 M) 8’ (2.4 M) 14’ (4.2 M) 20’ (6.0 M) 22’ (6.7 M) 28’ (8.5 M) Note: In accordance with Class 2 requirements, incandescent fixtures must not exceed 96 Watts. 6 | TOKISTAR LIGHTING TOKISTAR LIGHTING | 7 LS Series LSW - 30 - WH-HB - WP How to Specify LS Series Tapelight is the ideal choice for exterior applications and projects with heavier loads. UV-stabilized cables with larger conductors extend operating life and minimize voltage drop. These features offer many benefits in large-scale perimeter lighting and indirect applications with closer socket spacing. LS Series Tapelight with TokiLeds includes silicone caps for protection in all environments. Select TokiLeds or Incandescent Lamps as the light source, and refer to the appropriate chart. Series Code LSW LSC* LSB* Socket Spacing Cable Color Code White Clear Brown * Clear and brown available in 4”, 6” and 12” spacing only. 15 30 50 80 100 150 300 TokiLeds Inches (mm) Code Color Style Watts/Volts 0.6” (15 mm) 1.2” (30 mm) 2.0” (50 mm) 3.0” (80 mm) 4.0” (100 mm) 6.0” (150 mm) 12.0” (300 mm) WW IW WH WW-HB IW-HB WH-HB WW-UB IW-UB WH-UB 2400K White 3000K White 6500K White 2400K White 3000K White 6500K White 2400K White 3000K White 6500K White Standard Standard Standard High Brightness High Brightness High Brightness Ultra-Bright Ultra-Bright Ultra-Bright 0.1 W / 8 VDC 0.1 W / 8 VDC 0.1 W / 8 VDC 0.2 W / 8 VDC 0.2 W / 8 VDC 0.2 W / 8 VDC 0.4 W / 8 VDC 0.4 W / 8 VDC 0.4 W / 8 VDC AM BL GR MG PL RD Amber Blue Green Magenta Purple Red Standard Standard Standard Standard Standard Standard 0.1 W / 8 VDC 0.1 W / 8 VDC 0.1 W / 8 VDC 0.1 W / 8 VDC 0.1 W / 8 VDC 0.1 W / 8 VDC KLED-FF KLED-SF KLED-CF 3000K White 3000K White 3000K White Fast Flashing Slow Flashing Cross-Fading 0.2 W / 8 VDC 0.2 W / 8 VDC 0.2 W / 8 VDC Next, decide on cable color and the suitable socket spacing. For indirect applications, closer socket spacing provides a more uniform wash of light. When accenting with distinct points of light, wider socket spacing is the best choice. For perimeter lighting on buildings viewed from greater distances, 6” or 12” spacing are the most popular selections. LSW - 80 - 106a Series Socket Spacing Code Cable Color Code LSW LSC* LSB* 30 50 80 100 150 300 White Clear Brown * Clear and brown available in 4”, 6” and 12” spacing only. Cable color is available in white, clear or brown. Inches (mm) Code Style Watts/Volts 1.2” (30 mm) 2.0” (50 mm) 3.0” (80 mm) 4.0” (100 mm) 6.0” (150 mm) 12.0” (300 mm) 101a 105a 106a Outdoor Outdoor Outdoor 0.9 W / 24 VAC 1.8 W / 24 VAC 2.8 W / 24 VAC 101 105 106 Indoor Indoor Indoor 0.9 W / 24 VAC 1.8 W / 24 VAC 2.8 W / 24 VAC Sizes and Lengths TokiLed Specifications TokiLed-UB .79” (20 mm) .75” (19 mm) Incandescent TB-101a TB-105a / TB-106a .90” (24 mm) .75” (19 mm) Light Sources include incandescent lamps and LEDs Polycarbonate Sockets with flammability rating UL 94V-0 Silicone Caps provide protection in all environments Wet-Location Listed With LEDs Only Sockets are soldered and ultrasonically bonded to cable Flexible Braided Conductors are plated copper and rated 12 amps Insulation is UV-stabilized flexible PVC with flammability rating UL 94 HB .53” (13 mm) .53” (13 mm) .53” (13 mm) LED Fixture Length To minimize voltage drop and keep conductors safely within their rating, do not exceed the maximum lengths shown for each independent length of Tapelight. .53” (13 mm) Spacing 0.6” (15 mm) 1.2” (30 mm) 2.0” (50 mm) 3.0” (80 mm) 4.0” (100 mm) 6.0” (150 mm) 12.0” (300 mm) 0.1 Watt 0.2 Watt Incandescent 0.4 Watt 0.9 Watt N/A 20’ (6.0 M) 10’ (3.0 M) 5’ (1.5 M) 40’ (12.0 M) 20’ (6.0 M) 10’ (3.0 M) 30’ (9.1 M) 66’ (20.0 M) 33’ (10.0 M) 16’ (5.0 M) 40’ (12.2 M) 88’ (26.8 M) 50’ (15.2 M) 25’ (8.0 M) 50’ (15.2 M) 98’ (30.0 M) 66’ (20.0 M) 33’ (10.0 M) 56’ (17.0 M) 120’ (36.6 M) 90’ (27.4 M) 50’ (15.0 M) 72’ (21.9 M) 164’ (50.0 M) 126’ (38.4 M) 82’ (25.0 M) 100’ (30.4 M) 1.8 Watt 2.8 Watt N/A 15’ (4.5 M) 26’ (7.9 M) 34’ (10.3 M) 40’ (12.2 M) 48’ (14.6 M) 72’ (21.9 M) N/A 10’ (3.0 M) 16’ (5.0 M) 28’ (8.5 M) 30’ (9.1 M) 39’ (11.9 M) 55’ (16.7 M) Note: In accordance with Class 2 requirements, incandescent fixtures must not exceed 96 Watts. 8 | TOKISTAR LIGHTING TOKISTAR LIGHTING | 9 TLW Series How to Specify Nothing adds interest to an environment like an eye-catching display of colorful and animated lighting. TLW Series provides four-channel chasing effects with LEDs or BB-301 Bi-Bulb® incandescent lamps. With the introduction of TokiLeds, lighting designers now have even more choices in creating such stunning effects. Tokistar’s TLW Series uses three wires instead of five to achieve a perfectly linear placement of light sources. Select TokiLeds or our incandescent Bi-Bulb as the light source. Any combination of colored LEDs can be mixed on the same fixture. When selecting socket spacing, consider that not all lamps are illuminated at the same time. In a light-chase mode, every 4th lamp is on. In a shadow-chase mode, three out of every four lamps are on. Sizes and Lengths Tokistar three-wire TLW Series TokiLed Other flashing/chasing systems BB-301 TLW - 50 - WW-HB Socket Spacing Light Source Code Inches (mm) Code Style Watts / Volts 30 50 80 100 150 1.2” (30 mm) 2.0” (50 mm) 3.0” (80 mm) 4.0” (100 mm) 6.0” (150 mm) WW IW WH WW-HB IW-HB WH-HB 2400K White LED 3000K White LED 6500K White LED HB 2400K White LED HB 3000K White LED HB 6500K White LED 0.15 W / 12 VAC 0.15 W / 12 VAC 0.15 W / 12 VAC 0.30 W / 12 VAC 0.30 W / 12 VAC 0.30 W / 12 VAC AM BL GR MG PL RD Amber LED Blue LED Green LED Magenta LED Purple LED Red LED 0.15 W / 12 VAC 0.15 W / 12 VAC 0.15 W / 12 VAC 0.15 W / 12 VAC 0.15 W / 12 VAC 0.15 W / 12 VAC BB Bi-Bulb® Incandescent 0.8 W / 24 VAC Fixture Length To minimize voltage drop and keep conductors safely within their rating, do not exceed the maximum lengths shown for each independent length of Tapelight. LED .75” (19 mm) .67” (17 mm) .48” (12 mm) .48” (12 mm) Incandescent Spacing 0.15 Watt 0.30 Watt 0.80 Watt 1.2” (30 mm) 2.0” (50 mm) 3.0” (80 mm) 4.0” (100 mm) 6.0” (150 mm) 24’ (7.3 M) 43’ (13.1 M) 70’ (21.4 M) 84’ (25.6 M) 103’ (31.4 M) 11’ (3.4 M) 19’ (5.8 M) 30’ (9.1 M) 40’ (12.0 M) 66’ (20.0 M) 14’ (4.2 M) 20’ (6.0 M) 28’ (8.5 M) 30’ (9.1 M) 42’ (12.8 M) Note: In accordance with Class 2 requirements, incandescent fixtures must not exceed 96 Watts. Lighting Controller / TC-400BB Specifications Light Sources include incandescent lamps and LEDs Polycarbonate Sockets with flammability rating UL 94V-0 Flexible Conductors are plated copper and rated 5 amps Sockets are soldered and ultrasonically bonded to cable Insulation is flexible PVC with flammability rating UL 94 HB 10 | TOKISTAR LIGHTING TLW Series Tapelight requires the use of our TC-400BB Bi-Bulb® Controller. Each controller features a variety of patterns and speed control. These units can operate independently of each other, or they may be linked together to sequence all lights in unison. The TC-400BB may accept a 24 VAC input for controlling our BB-301 incandescent lamps, or a 12 VAC input for controlling TokiLeds. Dimensions: 1-1/2” x 4-3/4” x 6-1/8” Capacity for Class 2 Operation: BB-301 0.8 Watt/24 VAC Lamps: 120 pieces - Total 96 Watts TokiLeds 0.15 Watt/12 VAC LEDs: 400 pieces - Total 60 Watts TokiLeds 0.30 Watt/12 VAC LEDs : 200 pieces - Total 60 Watts Capacity for Non-Class 2 Operation: BB-301 0.8 Watt/24 VAC Lamps: 400 pieces - Total 320 Watts TokiLeds 0.15 Watt/12 VAC LEDs: 960 pieces - Total 144 Watts TokiLeds 0.30 Watt/12 VAC LEDs : 480 pieces - Total 144 Watts TOKISTAR LIGHTING | 11 Accessories Mounting Devices Part Number Description Mounting Devices TP-01 TP-02 WFT-32 WFL-20 WFL-108 RC-S SH-02 Tokistar offers a wide variety of mounting devices. The proper selection is determined by the surface Tapelight is attached to. In addition to the devices shown, construction adhesives capable of adhering well to PVC may be used. Mounting Bracket Mounting Staple 32 ft. roll Adhesive Tape 20 ft. roll Adhesive Tape 108 ft. roll Adhesive Tape Mounting Track Metal Fastener Cord Protectors and End Caps Cord Protectors are required to insulate the lead wire soldered to the beginning of each Tapelight, and End Caps are attached to the end. Cord Protectors Part Number Color Series ECL-BK ECL-WH ECL-CL EC-L ECW-L Bracket and Staples Brackets and staples provide secure mounting. The proper quantity and positioning is determined by the specifics of each application. When turning corners, a device should be used at the start of each bend. 1.6” (40 mm) TP-01 TP-02 0.6” (15 mm) 0.55” (14 mm) 0.79” (20 mm) Adhesive Tape Adhesive tapes work best on smooth surfaces. The WFT-32 roll is for use with TLP and TLW Series Tapelight. The WFL-108 and WFL-20 rolls are exterior-grade adhesive tapes for use with LS Series Tapelight. WFL for LS Series Decorative Channels provide added appeal in highvisibility applications. Tapelight is installed to the base with adhesive tape and the clear cover snapped in place. These channels may be used with all TokiLeds, TB-101 and BB-301 incandescent lamps. The SH-02 metal fasteners are used to securely lock sockets in place for panel mounting. Tapelight sockets are pushed through the hole in the panel from behind, and the fastener is pressed in place from above. SH-02 Black White Clear Clear LS LS LS TLP & TLW Part Number Description TXB-B TXB-W TXS-CS EC-B EC-W PVC Brown Base PVC White Base Polycarbonate Lens Black End Cap White End Cap Silicone caps provide protection to LS Series Tapelight for exterior use. When incandescent lamps are used in harsh environments, the WP-101C and WP-105C caps provide an additional measure of protection. SH-02 Hole Size: 3/8” Ø WP-L01C for TokiLed 12 | TOKISTAR LIGHTING ECD-BK ECD-WH ECD-CL EC-D Silicone Caps Panel Fastener Panel up to 0.075” Series .78” (20 mm) The RC-S is a semi-rigid polycarbonate track which can be securely mounted in place with screws to any surface. This provides a smooth surface to apply adhesive tapes on, and ensures perfect linear integrity. RC-S Color .9” (23 mm) Mounting Track 0.75” (19 mm) Part Number Decorative Channels WFT for TLP and TLW Series 0.18” (4.5 mm) LS LS LS TLP TLW End Caps 0.57” (14.5 mm) 1.2” (30 mm) Black White Clear Clear Clear WP-L02C for TokiLed-UB WP-101C for TB-101 WP-105C for TB-105 / TB-106 Part Number Description WP-L01C WP-L02C WP-101C WP-105C LED Cap UB LED Cap TB-101 Cap TB-105 / TB-106 Cap TOKISTAR LIGHTING | 13 LED Drivers LDR8-40 Tokistar’s LDR8-40 is a 40 Watt Class 2 LED Driver used to convert an AC input into an 8 VDC output. It may be operated from a wide range of input voltages. The enclosure is suitable for wet locations. Specifications LDR8-80 Tokistar’s LDR8-80 is a dual output Class 2 LED Driver with two independent 40 Watt outputs. It may be operated from a wide range of input voltages. The enclosure is suitable for wet locations. Specifications Input Range: 100~240 VAC Frequency Range: 50/60 Hz Output: 8 VDC (Adjustable +10% / -25%) Max. Output Current: 5.0A Max. Output Power: 40W Protection: Overload, Overcurrent, Short Circuit Operating Temperature: -30ºC to +60ºC Input Range: 100~240 VAC Frequency Range: 50/60 Hz Output: 8 VDC (Adjustable +5% / -30%) Max. Output Current: 10.0A (2 @ 5.0A) Max. Output Power: 80W (2 @ 40W) Protection: Overload, Overcurrent, Short Circuit Operating Temperature: -30ºC to +60ºC Mechanical Specifications Mechanical Specifications Dimensions: 3” x 9.75” x 2” Weight: 1.94 lbs Enclosure Rating: Nema 3/IP65 Mounting: Flange Mount Connection: Knockouts for 1/2” Conduit Dimensions: 3.6” x 11” x 2.25” Weight: 4 lbs Enclosure Rating: Nema 3/IP65 Mounting: Flange Mount Connection: Knockouts for 1/2” Conduit LED Capacity LED Capacity 0.10 Watt LEDs: 400 pieces 0.20 Watt LEDs: 200 pieces 0.24 Watt LEDs: 166 pieces 0.40 Watt LEDs: 100 pieces 0.10 Watt LEDs: 800 pieces 0.20 Watt LEDs: 400 pieces 0.24 Watt LEDs: 332 pieces 0.40 Watt LEDs: 200 pieces LED Dimmers This proprietary Dimming System provides full-range dimming of Tapelight LEDs. The system components connect with CAT5 cable. Up to 25 dimmer packs may be connected in series if the total length of all CAT5 cable does not exceed 165 feet from the wall dimmer to the last dimmer pack. CAT5 cables are included with units. LC-DMR Fixture Fixture 0-8VDC 0-8VDC Signal Out Dimmer Pack LED Driver Signal Out Dimmer Pack 8VDC Class 2 Transformers In some areas, local codes may require Tapelight be operated from Class 2 Transformers with inherent secondary circuit protection. Primary input is 120 VAC/60 Hz. Transformers with multiple outputs are enclosed within a Rainproof Type 3R Enclosure. 5” Tokistar Tapelight is ETL Listed when operated from our Class 2 transformers. Class 2 - 12 Volt Part Number Outputs D H W Weight C2-60-12V C2-120-12V C2-180-12V C2-240-12V C2-300-12V 1 @ 60 Watt / 12 VAC 2 @ 60 Watt / 12 VAC 3 @ 60 Watt / 12 VAC 4 @ 60 Watt / 12 VAC 5 @ 60 Watt / 12 VAC 3.5" 5.0" 5.0" 5.0" 5.0" 3.75" 7.0" 7.0" 7.0" 7.0" 5.0" 5.0" 5.0" 5.0" 5.0" 3 lbs 11 lbs 12 lbs 12 lbs 12 lbs Part Number Outputs D H W Weight C2-50-24V C2-96-24V C2-192-24V C2-288-24V C2-480-24V 1 @ 50 Watt / 24 VAC 1 @ 96 Watt / 24 VAC 2 @ 96 Watt / 24 VAC 3 @ 96 Watt / 24 VAC 5 @ 96 Watt / 24 VAC 2.5" 5.0" 5.0" 5.0" 6.0" 2.25" 7.0" 7.0" 7.0" 8.0" 3.0" 5.0" 5.0" 5.0" 6.0" 2 lbs 11 lbs 12 lbs 12 lbs 20 lbs 3.75” Class 2 - 24 Volt 3.5” C2-60-12V C2-50-24V LC Dimming System 8VDC Transformers Tokistar Tapelight is ETL Listed when operated from our LED Drivers. LED Driver Part #: LC-DMR DMX Dimming System Tokistar’s LC-1CH-MULTI Dimmer Pack is compatible with industry-standard dimmers working on DMX or 0/1-10 VDC protocol. In the manual mode, a preset light level can be set without the use of an external dimmer. In the DMX mode, the dimmer pack is addressable. Part #: LC-1CH-MULTI Max. Load: 40 Watts @ 8 VDC Environmental Rating: Dry Location/IP20 Dimensions: 3/4” x 1-3/4” x 3-1/2” Weight: 50g / 0.11 lbs Listing: ETL Listed/CE Certified Operating Temperature: 0~+50ºC T12 Series Transformers Number Outputs D H W Weight T12-100 T12-150 T12-250 T12-300 T12-500 T12-600 T12-750 T12-1000 T12-1200 1 @ 100 Watt / 12 VAC 1 @ 150 Watt / 12 VAC 1 @ 250 Watt / 12 VAC 1 @ 300 Watt / 12 VAC 2 @ 250 Watt / 12 VAC 2 @ 300 Watt / 12 VAC 3 @ 250 Watt / 12 VAC 4 @ 250 Watt / 12 VAC 4 @ 300 Watt / 12 VAC 3.0” 3.0” 3.5” 3.5” 4.5” 4.5” 4.5” 5.0” 5.0” 9.0” 9.0” 9.5” 9.5” 10.5” 10.5” 10.5” 11.5” 11.5” 3.0” 3.0” 4.5” 4.5” 4.5” 4.5” 4.5” 7.0” 7.0” 5 lbs 5 lbs 8 lbs 8 lbs 12 lbs 15 lbs 15 lbs 28 lbs 28 lbs Dimmer H Fixture Part #: LC-1CH-DP 14 | TOKISTAR LIGHTING Tokistar’s T12 and T24 Series Transformers come in a wide range of sizes from 100 to 1,200 Watts. Primary input is 120 VAC/60 Hz, and secondary outputs have inherent circuit protection. These transformers are enclosed within a Rainproof Type 3R Enclosure. D DMX or 0/1-10 VDC The remote wall dimmer has a rotary dial and on/off switch. Power to the wall dimmer is provided from the LED Driver powering the first Dimmer Pack. Each dimmer pack receives an 8 VDC input from an LED Driver and sends a 0-8 VDC output to the fixture. Logic input and output is communicated through CAT5 cable. Dimensions: 1-1/2” x 3-1/2” x 4-1/16” Non-Class 2 Transformers 0-8 VDC 0-8 VDC Dimmer Pack Dimmer Pack 8 VDC LED Driver LED Driver 8 VDC Data Data T24 Series Transformers Fixture Data Dual output LED Drivers require a dimmer pack for each output. W Consult factory for transformers with input voltages not shown. Number Outputs D H W Weight T24-100 T24-150 T24-250 T24-300 T24-500 T24-600 T24-750 T24-1000 T24-1200 1 @ 100 Watt / 24 VAC 1 @ 150 Watt / 24 VAC 1 @ 250 Watt / 24 VAC 1 @ 300 Watt / 24 VAC 1 @ 500 Watt / 24 VAC 1 @ 600 Watt / 24 VAC 2 @ 375 Watt / 24 VAC 2 @ 500 Watt / 24 VAC 2 @ 600 Watt / 24 VAC 3.0” 3.0” 3.5” 3.5” 4.5” 4.5” 4.5” 5.0” 5.0” 9.0” 9.0” 9.5” 9.5” 10.5” 10.5” 10.5” 11.5” 11.5” 3.0” 3.0” 4.5” 4.5” 4.5” 4.5” 4.5” 7.0” 7.0” 5 lbs 5 lbs 8 lbs 8 lbs 12 lbs 15 lbs 15 lbs 28 lbs 28 lbs TOKISTAR LIGHTING | 15 1015 E. Discovery Lane • Anaheim, CA 92801 Tel: 714.772.7005 • Fax: 714.772.7014 • Toll free in U.S.A.: 877.340.7633 E-mail: [email protected] • Web site: w w w.tokistar.com © 2011 TOKISTAR LIGHTING INC. / V1.0 TOKISTAR® LIGHTING INC.
