Room - ECF 21

Transcription

Room - ECF 21

Catania, Italy
June 20-24 2016
ECF21
21st European Conference on Fracture
PROGRAMME
General Programme
18-19/06
ESIS Summer School
19.06
18.00-20.00: ECF21 welcome drink and registration
21.06
08.00: registration
08.45-11.00: plenary lectures
11.00-17.45: parallel sessions
16.00-19.00: ESIS Council meeting (Room Pegaso 2)
18.15-20.00: TAFMEC Editorial Board meeting (Room Antares)
22.06
08.00: registration
17.15-18.15: training GOM correlate (Room Pegaso 2)
18.00-20.00: ESIS TC13 meeting (Room Mizar)
18.00-20.00: ESIS-TC5 meeting (Room Antares)
18.00-20.00: IGF Council meeting (Room Cassiopea 1)
18.15-20.00 EFM Editorial Board Meeting (Room Pegaso 3)
23.06
08.00: registration
20.00-23.30: conference dinner and social event (Hotel Baia Verde – walking distance from the Sheraton Hotel)
24.06
11.00-13.30: plenary lectures and ECF21 closing ceremony
Weekly Programme
20.06
08.00: registration
09.00-11.00: ECF21 opening ceremony and plenary lectures
16.00-18.00: ESIS ExCo Meeting (room “Argo”)
18.30-20.30: "Sangria party", offered by the IGF Journal "Frattura ed Integrità Strutturale" (Sheraton Terrace)
ROOMS
Weekly Programme
(Plenary sessions in Pegaso 2 + Pegaso 3)
Rooms Plan
Monday 20
Tuesday 21
Registration
8.00
Registration
Wednesday 22
Registration
Thursday 23
Registraion
Friday 24
9.00
9.00
Opening Ceremony
Plenary
Plenary
Plenary
Parallel Sessions
5.1
Coffee Break
Coffee Break
Coffee Break
Coffee Break
Parallel Sessions 2.1
Parallel Sessions
4.1
Plenary
9.30
Plenary
11.00
Coffee Break
Break
11.00
11.30
11.30
13.30
13.30
Lunch
Lunch
Lunch
Lunch
14.30
Parallel Sessions
4.2
Coffee Break
sponsored by
Frattura ed Integrità
Strutturale
16.00
18.15
Parallel Sessions
4.3
EFM
Editorial
Board
19.00
Sangria Party
18.15
18.00
14.30
16.30
17.15
IGF Council
18.30
18.15
Training GOM
correlate
ESIS TC5
Meeting
17.45
ESIS-TC13
Meeting
Poster session
Coffee Break
TAFMEC
Editorial
Board
18.00
Parallel
Sessions 1.3
Coffee Break
ESIS Council meeting
Coffee Break
ESIS ExCo
Meeting
16.00
16.30
13.00
Closing Ceremony
19.00
20.00
20.00
20.30
Rooms Plan
20.00
Conference Dinner and
Social Event
20.00
13.30
Rooms Plan
Monday 20
Plenary
Invited Lectures
the nature and the mechanism of crack initiation and early growth for very-high-cycle fatigue of
metallic materials
(Youshi Hong)
insights into fracture mechanics: what can x-ray diffraction and imaging tell us?
(Philip Withers)
Rooms Plan
Weekly Programme
Monday 20 - Session 1.1
Track
Room
Chairman
Minisymposium - Recent advances in the framework of
Finite Fracture Mechanics
Pegaso 2
Dominique
Leguillon
TC5 Minisymposium - Dynamic Fracture
Antares
Alan Needleman
Minisymposium - Local Approaches to Cleavage and
Ductile Fracture
Pegaso 1
Fumiyoshi
Minami
Minisymposium - Nonlinear, statistical and scaling
aspects of damage-failure transition
Cassiopea 1
Oleg Naimark
Analytical, computational and physical
Models/Computational Mechanics
Pegaso 3
Guy Pluvinage
Minisymposium - Fracture Nanomechanics
Idra
Takayuki
Kitamura
Advances in materials behaviour
Cassiopea 2
Meinhard Kuna
Minisymposium - Material Challenges for Extreme Oil and
Gas Environments
Mizar
Mimoun
Elboujdaini
Room
Pegaso 2
Chair
Dominique Leguillon
Track
Minisymposium - Recent advances in the framework of Finite Fracture Mechanics
11.00 - 11.15
a phase field method for modelling stress corrosion cracks propagation in a nickel base alloy
(Nguyen Thanh Tung, Bolivar José, Réthoré Julien, Baietto Marie-Christine, Marion Fregonese)
11.15 - 11.30
cohesive crack model and finite fracture mechanics: analytical solutions to the double cantilever
beam test
(Pietro Cornetti, Rossana Dimitri, Laura De Lorenzis, Vladislav Mantič)
11.30 - 11.45
assessment of crack-related problems in layered ceramics using the finite fracture mechanics and
coupled stress-energy criterion
(Oldřich Ševeček, Michal Kotoul, Dominique Leguillon, Eric Martin, Raul Bermejo)
11.45 - 12.00
influence of a neighbour fibre on the onset and growth of a fibre-matrix debond under biaxial
loading. a study by finite fracture mechanics at linear elastic interfaces.
(Mar Muñoz-Reja, Luis Távara, Vladislav Mantič, Pietro Cornetti)
12.00 - 12.15
computational prediction of crack initiation by combining the coupled criterion of ffm and xfem
(Israel G. García, Vladislav Mantič)
12.15 - 12.30
the coupled criterion of finite fracture mechanics formulated as optimization problems
(Vladislav Mantic)
12.30 - 12.45
bridged crack model of interfacial toughnes
(Mikhail Perelmuter)
12.45 - 13.00
Session Programme
Weekly Programme
Room
Antares
Chair
Alan Needleman
Track
11.00 - 11.15
more singular? self-similar dynamics of damage localization and instability in dynamic fracture
(Oleg Borisovich Naimark)
11.15 - 11.30
controlled disintegration of reinforced concrete blocks based on wave and fracture dynamics
(Koji Uenishi, Naoyuki Shigeno, Shintaro Sakaguchi, Hiroshi Yamachi, Junichiro Nakamori)
11.30 - 11.45
effect of non-metallic inclusions and shrinkage cavities on the dynamic fracture toughness of a
high-strength g42crmo4 cast steel
(Sebastian Henschel, Steffen Dudczig, Lutz Krüger, Christos G. Aneziris)
11.45 - 12.00
dynamic fracture in carbon-fibre composites: effect of steel and ice projectiles
(Laurence A. Coles, Anish Roy, Leonid Voronov, Boris Bolotov, Mikhail Nikhamkin, Vadim V.
Silberschmidt)
12.00 - 12.15
dynamic crack growth in a plastically compressible solid
(Alan Needleman)
12.15 - 12.30
dynamic fragmentation of shells: scale effects
(Ludmila Rafailovna Botvina, E. F. Gryaznov)
12.30 - 12.45
a meso-scale approach to modelling stable dynamic crack propagation in glass under ratedependent loading
(Timothy Crump, Paul Mummery, Andrey Jivkov)
12.45 - 13.00
dynamic crack propagation: quasistatic and impact loading
(Yuri Petrov, Nikita Kazarinov, Vladimir Bratov)
Session Programme
Weekly Programme
Room
Pegaso 1
Chair
Fumiyoshi Minami
Track
Minisymposium - Local Approaches to Cleavage and Ductile Fracture
11.00 - 11.15
weibull distribution of brittle failures in the transition region
(Chris Kingsley Seal, Andrew Sherry)
11.15 - 11.30
wes 2808 for brittle fracture assessment of steel components under seismic conditions - part i:
fracture assessment procedure
(Fumiyoshi Minami, M. Ohata, Y. Takashima, H. Shimanuki, Y. Shimada, T. Suzuki, S. Igi, T. Ishii,
M. Kinefuchi, T. Yamaguchi, T. Nakagomi, Y. Hagihara)
11.30 - 11.45
wes 2808 for brittle fracture assessment of steel components under seismic conditions part vi:
application of wes 2808 to beam-to-column connections
(Yasuhito TAKASHIMA, Mitsuru OHATA, Takumi ISHII, Yukito HAGIWARA, Fumiyoshi MINAMI)
11.45 - 12.00
wes 2808 for brittle fracture assessment of steel components under seismic conditions part ii:
change in mechanical properties of structural steels by pre-strain and dynamic loading
(Yusuke SHIMADA, Hiroshi SHIMANUKI, Satoshi IGI, Fumiyoshi MINAMI)
12.00 - 12.15
wes 2808 for brittle fracture assessment of steel components under seismic conditions part iii:
change in ctod fracture toughness of structural steels by pre-strain and dynamic loading
(Satoshi Igi, Yusuke Shimada, Masao Kinefuchi, Fumiyoshi Minami)
12.15 - 12.30
wes 2808 for brittle fracture assessment of steel components under seismic conditions part iv:
change in mechanical properties and fracture toughness of steel weld haz by pre-strain
(Tetsuo Yamaguchi, Masao Kinefuchi, Satoshi Igi, Yusuke Shimada, Yusuhito Takashima,
Fumiyoshi Minami)
12.30 - 12.45
wes 2808 for brittle fracture assessment of steel components under seismic conditions part v:
equivalent ctod ratio for correction of constraint loss in beam-to-column connections
(Mitsuru Ohata, Yasuhito Takashima, Fumiyoshi Minami)
12.45 - 13.00
defect tolerance in soft materials
(Roberto Brighenti, Andrea Spagnoli, Andrea Carpinteri, Federico Artoni)
Session Programme
Weekly Programme
Room
Cassiopea 1
Chair
Oleg Naimark
Track
Minisymposium - Nonlinear, statistical and scaling aspects of damage-failure transition
11.00 - 11.15
nonlocal conditions for the transition damage to a localized failure in brittle granular composites
and rocks under triaxial quasistatic loading
(Alexey Vyacheslavovich Zaitsev, Yuriy Viktorovich Sokolkin)
11.15 - 11.30
inelastic deformation and damage of flexible graphite o-ring seals and seal packs under their
exploitation in stop valves
(Alexey Vyacheslavovich Zaitsev, Ivan Yurievich Zoubko, Oleg Yurievich Isaev, Vitaliy Sergeevich
Koksharov, Dmitiy Veniaminovich Smirnov, Igor Alexeevich Sudakov)
11.30 - 11.45
sensors of fatigue data analysis and automated evaluation of damage for structural health
monitoring
(P.O. Maruschak, I.V. Konovalenko, T. Vuherer, S.V. Panin,F. Berto, I.M. Danyliuk, A. Menou)
11.45 - 12.00
scaling laws of structure and fragmentation parameters of zro2 ceramics.
(Marina Davydova, Sergey Uvarov)
12.00 - 12.15
transition from multi-center fracture to fragmentation statistics under intensive loading
(Irina Bannikova, Oleg Naimark, Sergey Uvarov)
12.15 - 12.30
numerical simulation of plastic strain localization and failure mode transition in metals under
dynamic loading
(Dmitry Bilalov, Mikhail Sokovikov, Yuri Bayandin, Vasiliy Chudinov, Vladimir Oborin, Oleg
Naimark)
12.30 - 12.45
defect induced shear instability and asb failure in metals
(Catherine Froustey, Ivan Panteleev, Elena Lyapunova, Oleg Naimark)
12.45 - 13.00
micromechanical cohesive zone relations for ductile fracture
(TUNCAY YALCINKAYA, Alan Cocks)
Session Programme
Weekly Programme
Room
Pegaso 3
Chair
Guy Pluvinage
Track
Analytical, computational and physical Models/Computational Mechanics
11.00 - 11.15
calculation of stress intensity factor in a non-homogeneous orthotropic half-plane weakened by
moving cracks
(M. Nourazar, M. Ayatollahi)
11.15 - 11.30
dugdale model for plastic zone size of interacting cracks under anti-plane deformation
(Alireza Hassani, Reza Teymoori Faal)
11.30 - 11.45
irwin's plastic zone size assessment for interacting cracks in a circular plane subjected to antiplane deformation
(Hossein Teimoori, Reza Teymoori Faal)
11.45 - 12.00
the effect of co2 stream impurities on brittle fracture of pipeline steel: a hybrid fluid-structure
modelling approach
(Reza Hojjati-Talemi, Solomon Brown, Sergey Martynov, Haroun Mahgerefteh)
12.00 - 12.15
a probabilistic fatigue assessment diagram to get a guaranteed lifetime with a low probability of
failure
(Guy Pluvinage, Salim Jallouf, Katia Casavola, Carmine Pappaplettere)
12.15 - 12.30
a new approach to simulate interface damage in brittle matrix composites
(Alexia Este, Bernard Toson, Jacqueline Saliba, Jalal El Yagoubi, Jean-Christophe
Mindeguia, Eric Martin, St´ephane Morel)
12.30 - 12.45
development of new formulation and likelihood function on probabilistic fracture initiation model
(Itsuki Kawata, Shuhei Yoshizu, Hiroaki Nakai, Kazuki Shibanuma, Shuji Aihara)
12.45 - 13.00
energy release rates at two perpendicularly meeting cracks by use of the scaled boundary finite
element method
(Sascha Hell, Wilfried Becker)
Session Programme
Weekly Programme
Room
Idra
Chair
Takayuki Kitamura
Track
11.00 - 11.15
prediction of fracture toughness for carbon nanotubes
(Chyanbin Hwu, Yu-Kuei Yeh)
11.15 - 11.30
creep crack propagation behavior in submicron gold films
(Hiroyuki Hirakata, Ryota Kotoge, Takumi Kameyama, Toshiyuki Kondo, Masayuki Sakihara, Kohji
Minoshima)
11.30 - 11.45
indentation of thin copper film using molecular dynamics and peridynamics
(Aylin Ahadi, Per Hansson, Solveig Melin)
11.45 - 12.00
defect sensitivity of single-crystal nano-sized copper beams
(Solveig Melin, Aylin Ahadi, Per Hansson)
12.00 - 12.15
fatigue crack propagation properties of submicron-thick freestanding copper films in vacuum
environment
(Toshiyuki Kondo, Akihiro Shin, Hiroyuki Hirakata, Kohji Minoshima)
12.15 - 12.30
interfacial fracture strength property of micro-scale sin/cu components
(Yoshimasa Takahashi, Kazuya Aihara, Itaru Ashida, Masanori Takuma, Kenichi Saitoh, Tomohiro
Sato, Kimitaka Higuchi, Yuta Yamamoto, Shigeo Arai, Shunsuke Muto)
12.30 - 12.45
effect of microscopic structure on high-cycle fatigue damage in poly-crystalline nano-copper
(Takashi Sumigawa, Takayuki Kitamura)
12.45 - 13.00
initial degradation process of heat-resistant materials based on the change of crystallinity of grain
boundaries
(Hideo Miura, Ken Suzuki, Takuya Murakoshi)
Session Programme
Weekly Programme
Room
Cassiopea 2
Chair
Meinhard Kuna
Track
11.00 - 11.15
crash-testing of a cfrp commercial aircraft sub-cargo fuselage section
(David Delsart, Gérald Portemont, Matthias Waimer)
11.15 - 11.30
mechanical and fracture properties of a self-compacting uhpc
(Bakr S Al-Azzawi, Bhushan Lal Karihaloo)
11.30 - 11.45
a study on evaluation of ductile crack initiation using strain hardening exponent for steels
(Takehisa Yamada, Yoichi Yamashita, Sohei Kanna)
11.45 - 12.00
statistical correlation between vibration characteristics, surface temperatures and service life of
rolling bearings - artificially contaminated by open pit coal mine debris particles
(Radivoje M Mitrovic, Zarko Z Miskovic, Milos B Djukic, Gordana M Bakic)
12.00 - 12.15
study on microscopic ductile fracture of in-situ tib2/2024 al matrix composite
(Su Jie, Li Yazhi, Jiang Wei, Zhang Dailong)
12.15 - 12.30
loading history and structure of fracture of material
(R.V. Goldstein, N.M. Osipenko)
12.30 - 12.45
on the influence of mn and mg additions on tensile properties, microstructure and quality index of
the a356 aluminium foundry alloy
(Annalisa Fortini, Mattia Merlin, Stefano Pirletti, Gian Luca Garagnani)
12.45 - 13.00
3d j-integral for functionally graded thermoelastic and temperature dependent materials
(Meinhard Kuna, Jarno Hein)
Session Programme
Weekly Programme
Room
Mizar
Chair
Mimoun Elboujdaini
Track
Minisymposium - Material Challenges for Extreme Oil and Gas Environments
11.00 - 11.15
fatigue behavior of high-strength steel in diesel fuel
(Shu Kagami, Akira Ueno, Susumu Miyakawa, Nobuyuki Miyamoto, Naoya Ishibasi, Guennec
Benjamin)
11.15 - 11.30
rapid gas decompression performance of elastomers – effect of testing parameters
(Bernd Schrittesser, Gerald Pinter, Thomas Schwarz, Zalan Kadar, Tibor Nagy)
11.30 - 11.45
hyper duplex stainless steels: structure & properties
(Guocai Chai, Kangas Pasi)
11.45 - 12.00
investigation of co2 induced corrosion in pipeline materials by means of mini-samples technique
(Tomasz Brynk, Zbigniew Pakiela, Danuta Miedzinska)
12.00 - 12.15
experimental and numerical slip line analysis of welded single-edge notched tension specimens
(Stijn Hertelé, Filip Van Gerven, Nenad Gubeljak, Wim De Waele)
12.15 - 12.30
material challenges for clod climate applications – safety criteria for steels
(Xiaobo Ren, Odd Magne Akselsen, Zhiliang Zhang)
12.30 - 12.45
experimental techniques for ductile damage characterization
(Alexander Sancho, Michael John Cox, Giles Aldrich-Smith, Paul A. Hooper, Catrin Mair Davies,
John P. Dear)
12.45 - 13.00
low cycle thermomechanical fatigue of vver-440 reactor pressure vessel steels: Investigation the
fatigue kinetics and development of a life assessment model
(Balázs Fekete, Péter Trampus, Dagmar Jandova, Josef Kasl, Bertalan Jóni, Fanni Misják, György
Radnóczi)
Session Programme
Weekly Programme
Weekly Programme
Track
Room
Chairman
TC4 Minisymposium - Advanced Fracture Mechanics
Testing of Polymers, Adhesives and Composites
Pegaso 2
Andrea Pavan
Antares
Vadim V.
Silberschmidt
Minisymposium - Constitutive modeling of cyclic plasticity
and damage of materials
Pegaso 1
Manuela Sander
Minisymposium - Constraint Effects in Fracture
Cassiopea 1
Valery
Shlyannikov
Pegaso 3
Paolo
Sebastiano Valvo
Fracture & Damage
Idra
Maria
Kashtalyan
Minisymposium - Mixed mode fracture at different scales
Cassiopea 2
Paulo M.S.T. de
Castro
General & Automotive Components
Mizar
Pavel Hutař
Room
Pegaso 2
Chair
Andrea Pavan
Track
TC4 Minisymposium - Advanced Fracture Mechanics Testing of Polymers, Adhesives and
Composites
14.30 - 14.45
discussion of the stress ratio effect on the fatigue delamination growth characterization in FRP
composite structures
(Wenchen Hu, Rhys Jones, Anthony J Kinloch)
14.45 - 15.00
modified hartman-schijve fitting of mode i delamination fatigue data and the resulting variation in
threshold values gthr
(Andreas J. Brunner, Ahmad Mujtaba, Steffen Stelzer, Rhys Jones)
15.00 - 15.15
delamination propagation and load ratio effects in dcb md woven composite specimens
(Ido Simon, Leslie Banks-Sills, Victor Fourman, Rami Eliasi)
15.15 - 15.30
application of strain-controlled fatigue testing methods to polymer matrix composites
(Maeve Higham, Peter B S Bailey)
15.30 - 15.45
an elastic-interface model for the mixed-mode bending test under cyclic loads
(Stefano Bennati, Paolo Fisicaro, Paolo Sebastiano Valvo)
15.45 - 16.00
(discussion)
Session Programme
Weekly Programme
Room
Antares
Chair
Vadim V. Silberschmidt
Track
14.30 - 14.45
influence of high intensity zr ion beam irradiation and testing temperature on 12cr1mov steel
impact toughness
(Ilya Viktorovich Vlasov, Sergey Viktorovich Panin, Pavel Orestovich Maruschak, Filippo Berto,
Dmitry Davidovich Moiseenko, Victor Petrovich Sergeev)
14.45 - 15.00
the effect of reflected stress wave on crack speed in quasi-statically loaded brittle crystal
specimens
(Merna Shaheen Moalim, Dov Sherman)
15.00 - 15.15
numerical analysis of the geometrical and material criteria of acceleration of shear crack to
supershear velocity in brittle nanoporous solids
(Evgeny Viktorovich Shilko, Sergey Grigorievich Psakhie, Valentin L. Popov)
15.15 - 15.30
dynamic fracture in carbon-fibre composites: air-blast loading
(Laurence A. Coles, Craig Tilton, Anish Roy, Arun Shukla, Vadim V. Silberschmidt)
15.30 - 15.45
evaluation of pre-strain effect on abnormal fracture occurrence in drop-weight tear test for high
toughness linepipe steel
(Toshihiko Amano, Taishi Fujishiro, Takehiro Inoue, Yasuhiro Shinohara)
15.45 - 16.00
combined measurement and modelling of deformation and fracture of gypsum with controlled
additions of porosity
(Dong Liu, Branko Šavija, Gillian E Smith, Peter Heard, Keith R Hallam, Erik Schlangen, Peter
Flewitt)
Session Programme
Weekly Programme
Room
Pegaso 1
Chair
Manuela Sander
Track
Minisymposium - Constitutive modeling of cyclic plasticity and damage of materials
14.30 - 14.45
a numerical approach to quantify the microstructure effect on the endurance fatigue strength of
structral steel
(Sebastian Münstermann, Mohamed Sharaf)
14.45 - 15.00
safety assessment of steels under ulcf loading conditions with damage mechanics model
(Yidu Di, Denis Novokshanov, Sebastian Münstermann)
15.00 - 15.15
numerical examinations of different plastic material models on crack growth behaviour under
elevated temperature
(Maria Paarmann, Manuela Sander)
15.15 - 15.30
unusual plastic deformation, damage and fracture in titanium: experimental tests and constitutive
modeling
(Benoit Revil, Oana Cazacu)
15.30 - 15.45
a two-scale constitutive parameters identification procedure for coupled elastoplastic fracture
and fatigue
(Valerio Carollo, Marco Paggi, Claudia Borri)
15.45 - 16.00
the influence of stress state on the exponent in the power law equation of fatigue crack growth
(Emiel Amsterdam)
Session Programme
Weekly Programme
Room
Cassiopea 1
Chair
Valery Shlyannikov
Track
14.30 - 14.45
nonlinear stress intensity factors in fracture mechanics and their applications
(Valery Shlyannikov)
14.45 - 15.00
joint evaluation of fracture results from distinct test conditions, implying loading, specimen size
and geometry
(Miguel Muniz-Calvente, Valery Shlyannikov, Toshiyuki Meshii, Alfonso Fernández-Canteli)
15.00 - 15.15
a loss of constraint assessment using σ*-v* approach to describe the effect of crack depth on
reference transition temperature t0
(Abhishek Tiwari, Ram Niwas Singh, Per Ståhle, Jayanta Kumar Chakravartty)
15.15 - 15.30
engineering framework to transfer the minimum fracture toughness between different
temperatures in the dbtt region
(Toshiyuki Meshii, Teruhiro Yamaguchi)
15.30 - 15.45
examination of methods for the treatment of constraint effects within the fad approach
(Igor Varfolomeev, Florian Dittmann)
15.45 - 16.00
Session Programme
Weekly Programme
Room
Pegaso 3
Chair
Paolo Sebastiano Valvo
Track
14.30 - 14.45
a cohesive-zone model for steel beams strengthened with pre-stressed laminates
(Stefano Bennati, Davide Colonna, Paolo Sebastiano Valvo)
14.45 - 15.00
towards a mesh independent fracture modeling method using cohesive elements
(Daniel Pino Muñoz, Modesar Shakoor, Marc Bernacki, Pierre-Olivier Bouchard)
15.00 - 15.15
simulation of fatigue crack growth in heterogeneous material with peridynamics
(Mirco Zaccariotto, Giulia Sarego, Daniele Dipasquale, Ugo Galvanetto)
15.15 - 15.30
a nonlinear constitutive relation for the analysis of frcm elements
(Patrizia Bernardi, Daniele Ferretti, Filippo Leurini, Elena Michelini)
15.30 - 15.45
micromechanical model for describing intergranular fatigue cracking in a lead-free solder alloy
(Van-Nhat LE, L. Benaboua, V. Etgensa, Q. B. Taoa)
15.45 - 16.00
experiments and modelling on the anisotropy of a pipeline steel considering the thickness
inhomogeneity
(Junhe Lian, Marcelo Paredes, Yannik Sparrer, Benedikt Döbereiner, Sebastian Münstermann,
Tomasz Wierzbicki)
Session Programme
Weekly Programme
Room
Idra
Chair
Maria Kashtalyan
Track
Fracture & Damage
14.30 - 14.45
prediction of arrest pressure in pipe based on ctoa
(Guy Pluvinage, Mohamed Ben Amarra, Julien Capelle, Zitoune Azari)
14.45 - 15.00
experimental and numerical investigations on limit strains in ductile fracture
(Florian Fehringer, Michael Seidenfuss, Xaver Schuler)
15.00 - 15.15
numerical simulation of mesomechanical behavior of porous brittle materials
(Igor Yurievich Smolin, Pavel Vasilievich Makarov, Mikhail Olegovich Eremin, Kirill Sergeyevich
Matyko)
15.15 - 15.30
an experimental investigation into pin-loading effects on fatigue crack growth in fibre metal
laminates
(ZHINAN ZHANG, WANDONG WANG, CALVIN RANS, RINZE BENEDICTUS)
15.30 - 15.45
strain-induced room temperature grain coarsening: side effect or major energy dissipation
mechanism?
(Oleksandr Glushko)
15.45 - 16.00
transverse cracking in metal/ceramic composites with lamellar microstructure
(Maria Kashtalyan, Romana Piat, Igor Guz)
Session Programme
Weekly Programme
Room
Cassiopea 2
Chair
Paulo M.S.T. de Castro
Track
14.30 - 14.45
effect of compression residual stress on fatigue properties of astm ca6nm stainless cast steel
(Yoshiichirou Hayashi, Hiroyuki Akebono, Masahiko Kato, Atsushi Sugeta)
14.45 - 15.00
full- and small-scale tests on strain capacity of x80 seamless pipes
(Ajit Bastola, Junkan Wang, Hidenori Shitamoto, Ali Mirzaee-Sisan, Masahiko Hamada, Nobuyuki
Hisamune)
15.00 - 15.15
modelling of the fracture of a railway wheel
(Daniel F.C. Peixoto, Paulo M.S.T. de Castro)
15.15 - 15.30
synthesis of crack initiation life in steel notched specimens under torsional fatigue based on the
averaged strain energy density
(Giovanni Meneghetti, Alberto Campagnolo, Filippo Berto, Keisuke Tanaka)
15.30 - 15.45
behaviour of a crack in a corner or at a tip of polygon-like particle
(Jan Klusák, Ondřej Krepl, Tomáš Profant)
15.45 - 16.00
reconstruction of 2d stress field around a tip of sharp material inclusion
(Ondrej Krepl, Jan Klusak)
Session Programme
Weekly Programme
Room
Mizar
Chair
Pavel Hutař
Track
14.30 - 14.45
on the effects of loading condition, stress-state and environment on fracture and fatigue behavior
of bulk metallic glasses
(Bernd Gludovatz, Robert O. Ritchie)
14.45 - 15.00
cyclically loaded components live longer than expected! but why?
(Jürgen Maierhofer)
15.00 - 15.15
combined effect of damage and plastic anisotropy on the ductility limit of thin metal sheets
(Sabeur MSOLLI, Mohamed BEN BETTAIEB, Farid ABED-MERAIM )
15.15 - 15.30
mechanical characterization of miniaturized litao3 and linbo3 single crystal specimens for
smartphone applications
(Manuel Gruber, Raul Bermejo, Daniel Kiener, Jeroen Bielen, Peter Supancic, Robert Danzer)
15.30 - 15.45
influence of variable stress ratio during train operation on residual fatigue lifetime of railway axles
(Pavel Pokorný, Luboš Náhlík, Pavel Hutař)
15.45 - 16.00
mechanical testing and numerical predictions of the behavior of braided carbon fiber components
(Matei Constantin Miron, Harald Katzinger, Severin Neudorfer, Emil Pitz, Zoltan Major)
Session Programme
Weekly Programme
Weekly Programme
Track
Room
Chairman
Pegaso 2
Andrea Pavan
Antares
Yuri Petrov
Minisymposium - Constitutive modeling of cyclic plasticity
and damage of materials
Pegaso 1
Pierre-Olivier
Bouchard
Cassiopea 1
Toshiyuki Meshii
Pegaso 3
Jesus Toribio
Fracture & Damage
Idra
Jaroslav Polák
Minisymposium - Thermal Methods for fatigue
assessment
Cassiopea 2
Giacomo
Risitano
Mizar
Aleksandar
Sedmak
Room
Pegaso 2
Chair
Andrea Pavan
Track
Composites
16.30 -16.45
fatigue crack growth of fml composites under mode ii loading conditions
(Giuseppe Marannano, Antonino Pasta, Francesco Parrinello, Antonio Giallanza)
16.45 - 17.00
fatigue behaviour of friction stir welding of polymers
(Shayan Eslami)
17.00 - 17.15
on energy release rates in heterogeneous composite laminates
(Marcus Wheel)
17.15 - 17.30
woven fabric composites: can we peel it?
(Francisco Sacchetti, Wouter J.B. Grouve, Laurent L. Warnet, Irene Fernandez Villegas)
17.30 - 17.45
through-thickness fatigue behavior of non-crimp fabrics featuring manufacturing defects
(Susanne Hörrmann, Adi Adumitroaie, Martin Schagerl)
17.45 - 18.00
(discussion)
Session Programme
Weekly Programme
Room
Antares
Chair
Yuri Petrov
Track
16.30 -16.45
general effects of pulse electric breakdown of dielectric gaps and dynamic failure of continuous
media
(Ivan Smirnov, Yuri Petrov)
16.45 - 17.00
the influence of damages on dynamic brittle fracture process
(Zheng Li, Guiyun Gao, Jie Zhou)
17.00 - 17.15
the strength competition effect at different strain rates
(Alexey Evstifeev, Yuri Petrov, Anatoly Bragov, Alexander Konstantinov)
17.15 - 17.30
a cohesive finite element model based ale formulation for multilayered composite beams under
dynamic loading
(Funari Francesco Maria, Fabrizio Greco, Paolo Lonetti)
17.30 - 17.45
dynamic shear crack propagation along heterogeneous interfaces: a length scale effect
(David S. Kammer)
17.45 - 18.00
the dynamic rupture of interfaces made of heterogenous fracture properties.
(Fabian Barras, Philippe H. Geubelle, Jean-François Molinari)
Session Programme
Weekly Programme
Room
Pegaso 1
Chair
Pierre-Olivier Bouchard
Track
Minisymposium - Constitutive modeling of cyclic plasticity and damage of materials
16.30 -16.45
damage mechanisms and fracture toughness of fibrous dual-phase steels for automotive
applications
(Karim Ismail)
16.45 - 17.00
evaluation of fatigue crack growth performance in different hardmetal grades based on finite
element simulation
(Utku Ahmet Özden, Keng Jiang, Alexander Bezold, Christoph Broeckmann)
17.00 - 17.15
damage model calibration and application for s355 steel
(João Ribeiro, Aldina Santiago, Constança Rigueiro)
17.15 - 17.30
effects of surface roughness on thermo-mechanical fatigue life of a p91 power plant steel
(Si T Kyaw, J.P. Rouse, J. Lu, W. Sun)
17.30 - 17.45
quantification of a cyclic damage in ductil extruded aluminum alloys
(Abdelghani MAY)
17.45 - 18.00
numerical modeling of failure mechanisms in complex heterogeneous microstructures
(Pierre-Olivier Bouchard, Modesar Shakoor, Victor Trejo Navas, Marc Bernacki)
Session Programme
Weekly Programme
Room
Cassiopea 1
Chair
Toshiyuki Meshii
Track
16.30 -16.45
analysis of specimen size conversion in the ductile to brittle transition region of ferritic steels
(Juan E. Perez Ipiña, Carlos Berejnoi)
16.45 - 17.00
application of modified ritchie-knott-rice failure criterion to predict the onset of cleavage fracture
for the test specimen with residual stress introduced to the crack tip
(Kenichi Ishihara, Takeshi Hamada, Naohiro Kikuya, Toshiyuki Meshii)
17.00 - 17.15
two-parameter fracture characterization of a welded pipe in the presence of residual stresses
(Abolfazl Zahedi, Van-Xuan Tran, Andrey Jivkov)
17.15 - 17.30
engineering framework to transfer the minimum fracture toughness in the dbtt region between
se(b) and 1tct specimens
(Toshiyuki Meshii, Yusuke Fujita)
17.30 - 17.45
assessment of constraint independence and temperature dependence of critical fracture energy,
gfr
(Sukalpa Choudhury, Sanjib Kumar Acharyya, Sankar Dhar)
17.45 - 18.00
Session Programme
Weekly Programme
Room
Pegaso 3
Chair
Jesus Toribio
Track
16.30 -16.45
a unilateral nonlocal tensile damage model for masonry structures
(Claudia Tesei, Giulio Ventura)
16.45 - 17.00
2d-lattice modelling of crack propagation induced by fluid injection in heterogeneous quasi-brittle
materials
(David Grégoire, Vincent Lefort, Olivier Nouailletas, Gilles Pijaudier-Cabot)
17.00 - 17.15
computational modelling of transversely isotropic high-cycle fatigue using a continuum based
model
(Sami Holopainen, Reijo Kouhia, Juho Könnö, Timo Saksala)
17.15 - 17.30
fatigue crack development in a low-carbon steel. microstructure influence. modelling
(Donka Gueorguieva Angelova, Rozina Yordanova, Svetla Yankova)
17.30 - 17.45
fatigue crack growth in round bars for rock anchorages: the role of residual stresses
(Jesus Toribio, Juan-Carlos Matos, Beatriz González, José Escuadra)
17.45 - 18.00
notch support for lcf-loading: a fracture mechanical approach
(Christian Kontermann, Henning Almstedt, Alfred Scholz, Matthias Oechsner)
Session Programme
Weekly Programme
Room
Idra
Chair
Jaroslav Polák
Track
Fracture & Damage
16.30 -16.45
interrelation between local strain jumps and temperature bursts due to the jerky flow in metals
under the complicate loading conditions: experimental study by using the dic-technique and the iranalysis
(Tatyana Victorovna Tretyakova, V. E. Wildemann)
16.45 - 17.00
effect of hydrogen on tensile behavior of low alloy steel in the regime of dynamic strain ageing
(Sudhakar Rao G., Zaiqing Que, Hans-Peter Seifert, Philippe Spatig, Stefan Ritter)
17.00 - 17.15
damage evolution in thermomechanical loading of stainless steel
(R. Petráš, V. Škorík, J. Polák)
17.15 - 17.30
damage investigation in a319 aluminum alloy by digital image correlation during in-situ tensile
tests
(Zaidao Li, Nathalie Limodin, Amina Tandjaoui, Philippe Quaegebeur, Jean-François Witz, David
Balloy)
17.30 - 17.45
Probabilistic fracture mechanics of irradiation assisted stress corrosion cracking in stainless steels
(M.J. Konstantinovi)
17.45 - 18.00
Session Programme
Weekly Programme
Room
Cassiopea 2
Chair
Giacomo Risitano
Track
Minisymposium - Thermal Methods for fatigue assessment
16.30 -16.45
on the thermoelastic and second harmonic signals in brittle polymers during fatigue crack growth
(Giuseppe Pitarresi, Andrea Toscano)
16.45 - 17.00
nondestructive evaluation of fatigue cracks in steel bridges based on thermoelastic stress
measurement
(Takahide Sakagami, Yui Izumi, Daiki Shiozawa, Taisei Fujimoto, Yoshiaki Mizokami, Taku Hanai)
17.00 - 17.15
study of crack propagation in high-cycle fatigue testing based on energetic analysis
(Giovanna Angela Fargione)
17.15 - 17.30
the use of digital image correlation to correct the thermoelastic curves in static tests
(Guido La Rosa, Carmelo Clienti, Adriana Marino Cugno Garrano)
17.30 - 17.45
sif determination with thermoelastic stress analysis
(Behzad V. Farahani, Paulo J. Tavares, P. M. G. P. Moreira)
17.45 - 18.00
fatigue life prediction of high strength steel welded joints by energy approach
(P. Corigliano, V. Crupi, G. Epasto, E. Guglielmino, G. Risitano)
Session Programme
Weekly Programme
Room
Mizar
Chair
Aleksandar Sedmak
Track
16.30 -16.45
crack propagation behavior in planet gears
(Andrea Mura, Francesca Curà, Carlo Rosso)
16.45 - 17.00
high strain rate behavior of aluminum die cast components
(Graziano Ubertalli, Fabio D'Aiuto, Stefano Plano, Daniele De Caro)
17.00 - 17.15
3-d stress intensity factors due to full autofrettage for inner radial or coplanar crack arrays and
ring cracks in a spherical pressure vessel
(Mordechai Perl, Matan Steiner)
17.15 - 17.30
oxidation behavior during prolonged service of boiler tubes made of 2.25cr1mo and 12cr1mo0.3v
heat resistance steels
(Gordana M. Bakic, Milos D. Djukic, Bratislav Rajicic, Vera Sijacki Zeravcic, Aleksandar Maslarevic,
Nenad Milosevic)
17.30 - 17.45
risk based approach to integrity assessment of a large spherical pressure vessel
(Aleksandar Sedmak, Snezana Kirin)
17.45 - 18.00
assessment of damage evolution in sandwich composite material subjected to repeated impacts
by means optical measurements
(Filippo Cucinotta, Eugenio Guglielmino, Giacomo Risitano, Felice Sfravara)
Session Programme
Weekly Programme
Rooms Plan
Tuesday 21
Plenary
Invited Lectures
time saving method for measuring vhc fatigue and fatigue crack growth data with the ultrasonic
fatigue technique
(Stefanie E. Stanzl-Tschegg)
applications of residual stress in combatting fatigue and fracture
(M N James, D G Hattingh, D Asquith, M Newby, P Doubell)
j-a elastic-plastic crack tip field and the two-parameter fracture criterion
(Yury Matvienko, Gennady Nikishkov)
Rooms Plan
Weekly Programme
Tuesday 21 - Session 2.1
Track
Room
Chairman
Pegaso 2
Andrea Pavan
Minisymposium - Fracture in biomechanics: theoretical
and experimental approaches to the resistance of
biomaterials and
Antares
Salvatore
Federico
TC10 Minisymposium - Environmentally Assisted Cracking
& Hydrogen Embrittlement
Pegaso 1
Ryuichiro Ebara
Fracture in layered materials
Cassiopea 1
Raul Bermejo
Pegaso 3
Jacques Besson
Fracture in weldings and joints
Idra
Leonardo Bertini
Cassiopea 2
Girolamo
Costanza
Test Methods & Fracture Toughness of Materials
Mizar
Kim R. W.
Wallin
Room
Pegaso 2
Chair
Andrea Pavan
Track
Composites
11.00 - 11.15
study of shear dominant delamination in thin brittle-high ductile interface
(Md Shafiqul Islam, Defeng Zhang, Nasir Mehmood, Sharon Kao-Walter)
11.15 - 11.30
delamination of metal-polymer interfaces in stretchable electronics
(Johan Hoefnagels, Sandra Kleinendorst, Salman Shafqat, Jan Neggers, Olaf van der Sluis, Marc
Geers)
11.30 - 11.45
the impact of the multiwall carbon nanotubes on the fatigue properties of adhesive joints of 2024t3 aluminium alloy subjected to peel
(Andrzej Kubit, Magdalena Bucior, Władysław Zielecki)
11.45 - 12.00
a 2D peridynamic model for failure analysis of orthotropic thin plates due to bending
(Ahmet Taştan, Mirco Zaccariotto, Uğur Yolum, Mehmet A. Guler, Ugo Galvanetto)
12.00 - 12.15
mechanical and fracture performance of carbon fibre reinforced composites with hybrid
nanoparticle modified matrices
(Declan John Carolan, Anthony J Kinloch, Alojz Ivankovic, Stephan Sprenger, Ambrose C Taylor)
12.15 - 12.30
toughening and mechanical properties of epoxy modified with block co-polymers and MWCNTs
(Ankur Bajpai, Arun Kumar Alapati, Bernd Wetzel)
12.30 - 12.45
time dependent fracture behaviour of a carbon fibre composite based on a rubber toughened
acrylic polymer
(Tommaso Pini, Francesco Briatico-Vangosa, Roberto Frassine, Marta Rink)
12.45 - 13.00
(discussion)
Session Programme
Weekly Programme
Room
Antares
Chair
Salvatore Federico
Track
Minisymposium - Fracture in biomechanics: theoretical and experimental approaches to the
resistance of biomaterials and
11.00 - 11.15
crack propagation in additive manufactured materials and structures
(Andre Riemer, Hans Albert Richard)
11.15 - 11.30
fracture behaviour of bacterial cellulose hydrogel: effect of microstructure
(Xing Gao, Zhijun Shi, Changqing Liu, Guang Yang, Vadim Silberschmidt)
11.30 - 11.45
progressive damage of collagen fibres in soft biological tissues: a continuum model.
(Amirhossein Hamedzadeh, T. Christian Gasser, Salvatore Federico)
11.45 - 12.00
experimental analysis of pedicle screws
(Guido La Rosa, Carmelo Clienti, Rosalia Mineo, Alberto Audenino)
12.00 - 12.15
analysis of the effect of implant distance from the surrounding structure
(Mitrović Nenad, Tanasić Ivanb, Šarac Dušan, Miloš Milošević, Žarko Mišković, Ljiljana TihačekŠojić, Aleksandar Sedmak)
12.15 - 12.30
wear study of innovative ti-ta alloys
(Teresa Leonor Martins Morgado)
12.30 - 12.45
on possibility of unloading control at leg orthotics
(Ilya Nickolaevich Dashevskiy)
12.45 - 13.00
investigation of the effect of internal pores distribution on the elastic properties of closed-cell
aluminum foam: a comparison with cancellous bone
(M. J. Mirzaali, F. Libonati, P. Vena, V. Mussi, L. Vergani, M. Strano)
Session Programme
Weekly Programme
Room
Pegaso 1
Chair
Ryuichiro Ebara
Track
TC10 Minisymposium - Environmentally Assisted Cracking & Hydrogen Embrittlement
11.00 - 11.15
hydrogen assisted macrodelamination in gas lateral pipe
(Hryhoriy Mykolayovych Nykyforchyn, Olha Ivanivna Zvirko, Oleksandr Tymophiyovych Tsyrulnyk)
11.15 - 11.30
parametric study of the crack growth behavior of high density polyethylene under the
combination of mechanical and oxidative degradations
(Jung-Wook Wee)
11.30 - 11.45
the influence of metallurgical factors on corrosion fatigue strength of stainless steels
(Ryuichiro Ebara)
11.45 - 12.00
effects of hydrogen pressure, test frequency and test temperature on fatigue crack growth
properties of low-carbon steel in gaseous hydrogen
(Junichiro Yamabe, Michio Yoshikawa, Hisao Matsunaga, Saburo Matsuoka)
12.00 - 12.15
hydrogen embrittlement at low temperatures in ultra-high-strength steels
(Sakari Pallaspuro, Haiyang Yu, David Porter, Zhiliang Zhang)
12.15 - 12.30
internal and surface damage after electrochemical hydrogen charging for ultra low carbon steel
with various degrees of deformation
(Aurélie Laureys, Emilie Van den Eeckhout, Roumen Petrov, Kim Verbeken)
12.30 - 12.45
visualization of damages of the main pipelines using cyclic hydro testing
(Halyna Vasylivna Krechkovska)
12.45 - 13.00
on the mechanism of dynamic embrittlement and its effect on fatigue crack propagation in in718
at 650°c
(Hans-Jürgen Christ, Ken Wackerman, Ulrich Krupp)
Session Programme
Weekly Programme
Room
Cassiopea 1
Chair
Raul Bermejo
Track
11.00 - 11.15
fracture analysis of a cracked orthotropic strip bonded to a magneto-electro-elastic layer
(M. Nourazar, M. Ayatollahi, J. Miandari, S. Varasteh)
11.15 - 11.30
tailoring the fracture in layered ceramics
(Raul Bermejo)
11.30 - 11.45
formation of nitrided layer using atmospheric-controlled ih-fpp and its effect on the fatigue
properties of ti-6al-4v alloy under four-point bending
(Shoichi Kikuchi, S. Ota, H. Akebono, M. Omiya, J. Komotori, A. Sugeta, Y. Nakai)
11.45 - 12.00
experimental and numerical investigation of fracture in brittle multi-layers on flexible substrate
(Davy Dalmas, Ilhem Ben Cheick, Jérémie Teisseire, Joel Marthelot)
12.00 - 12.15
on propagation of interface cracks in bi-layered strip in relation to delamination of coatings from
substrates of final thickness
(KONSTANTIN Borisovich USTINOV)
12.15 - 12.30
crack front pinning at patterned planar interfaces in multilayer thin films
(Aymar Quarré de Boiry, Jérémie Teisseire, Davy Dalmas, Jean-Yvon Faou)
12.30 - 12.45
understanding the fracture behavior of miniaturized zno-based multilayer components
(Raul Bermejo)
12.45 - 13.00
crack propagation in layers under small-scale yielding
(Shahriar J Fariborz, Jalil P Vafa)
Session Programme
Weekly Programme
Room
Pegaso 3
Chair
Jacques Besson
Track
11.00 - 11.15
plane stress deformation near a crack tip in a hardening material of stress state dependent
properties
(Evgeny Lomakin, Ivan Valerievich Ovchinnikov)
11.15 - 11.30
3d model of hydraulic fracture with herschel-bulkley compressible fluid pumping
(Vasily Lapin, Sergey Cherny)
11.30 - 11.45
3d crack propagation simulation capabilities using remeshing techniques and applications
(Adrian Loghin, Jeffrey LeMonds, Balajee Ananthasayanam, Arjun Roy, Arun Subramaniyan)
11.45 - 12.00
towards the application of femu for the identification of a ductile material model within the finite
strain framework
(Francesco Bettonte, Sylvia Feld-Payet, David Lévêque, Jacques Besson)
12.00 - 12.15
study of cavities in a creep crack growth test specimen
(Hedieh Jazaeri, P John Bouchard, Michael T Hutchings, Abdullah A Mamun, Richard K Heenan)
12.15 - 12.30
asymptotic near-field analysis of wedges in anisotropic composite plates using first-order shear
deformation theory
(Julian Felger, Wilfried Becker)
12.30 - 12.45
numerical modeling of stress-strain behavior of composite overwrapped pressure vessel
(Egor Moskvichev)
12.45 - 13.00
obtaining the j-integral from diffraction-based strain mapping datasets
(Selim Matthias Barhli, Luis Saucedo-Mora, Christopher Simpson, Thorsten Becker, Thomas James
Marrow)
Session Programme
Weekly Programme
Room
Idra
Chair
Leonardo Bertini
Track
11.00 - 11.15
effect of HFMI treatment procedure on weld toe geometry and fatigue properties of high strength
steel welds
(Ebrahim Harati, Lars-Erik Svensson, Leif Karlsson, Kjell Hurtig)
11.15 - 11.30
identification of the weakest metallurgical zone on fracture behavior of an undermatched welded
joint
(Wissal REKIK, Olivier ANCELET, Catherine Gardin)
11.30 - 11.45
investigating plastic deformation around a reheat-crack in a 316h austenitic stainless steel
weldment by misorientation mapping
(Rahul Unnikrishnan, Shirley M Northover, Hedieh Jazaeri, P John Bouchard)
11.45 - 12.00
influence of the grain structure gradient on the crack growth in the welding zone for ferritic
stainless steel
(Manon Abecassis, Vladimir A. Esin, Alain Köster, Vincent Maurel)
12.00 - 12.15
fracture toughness of electron beam welded fine grain steels
(Ann-Christin Hesse, Thomas Nitschke-Pagel, Klaus Dilger)
12.15 - 12.30
fatigue strength of welded joints subjected to different histories of bending and torsion loading
(Francesco Frendo, Leonardo Bertini, Giuseppe Marulo)
12.30 - 12.45
crack propagation analysis around the holes in the plates under the effect of external stresses
using the finite element model
(Sofiane CHORFI, Brahim NECIB)
12.45 - 13.00
Session Programme
Weekly Programme
Room
Cassiopea 2
Chair
Girolamo Costanza
Track
11.00 - 11.15
fully reversed axial notch fatigue behaviour of virgin and recycled polypropylene compounds
(Giovanni Meneghetti, Mauro Ricotta, Massimo Sanità, Davide Refosco)
11.15 - 11.30
improved zn-based coatings for ipersandelin steel products
(Giovanni Fortese, Andrea Carpinteri, Vittorio Di Cocco, Francesco Iacoviello, Stefano Natali,
Sabrina Vantadori, Camilla Ronchei, Daniele Sforza)
11.30 - 11.45
three-dimensional morphology of iron rich phases in recycled al-si-cu cast alloys
(Inigo Bacaicoa, Marcel Wicke, Martin Luetje, Angelika Brueckner-Foit)
11.45 - 12.00
optimization of the process parameters for the manufacturing of open-cells iron foams with high
energy absorption
(Girolamo Costanza, Gjergj Dodbiba, Maria Elisa Tata)
12.00 - 12.15
temperature and moisture effects on the failure mode of highly shrinkable raw catalyst supports
(Fouzia Achchaq, Fouzia Achchaq, Alexandre Godin, Marie Duquesne, Jean-Rodophe Puiggali,
Wahbi Jomaa)
12.15 - 12.30
mechanical and thermal expansion properties of injected wood polymer composites
(Mohamed Ali Lahmar)
12.30 - 12.45
microstructural changes during deformation of aisi 300 grade austenitic stainless steels: impact of
chemical heterogeneity
(Jiří Man, Ivo Kuběna, Marek Smaga, Ondřej Man, Antti Järvenpää, Anja Weidner, Zdeněk Chlup,
Jaroslav Polák)
12.45 - 13.00
Session Programme
Weekly Programme
Room
Mizar
Chair
Kim R. W. Wallin
Track
11.00 - 11.15
sub-sized cvn specimen conversion methodology
(Kim Roger Wilhelm Wallin, Päivi Karjalainen-Roikonen, Pasi Suikkanen)
11.15 - 11.30
investigation on the rotational deformation of fracture toughness se(b) specimens and new
proposal of a ctod formula with various crack length-to-width ratios
(Tomoya Kawabata, Tetsuya Tagawa, Yoichi Kayamori, Shuji Aihara, Yukito Hagihara)
11.30 - 11.45
comparison of j equations for sent specimens
(Philippa L Moore, Emily Hutchison)
11.45 - 12.00
load separation in 17 mm wide ct specimen of zr-2.5nb pressure tube material
(Arvind Kumar Bind, Saurav Sunil, Ram Niwas Singh, Abhishek Tiwari, Jayanta Kumar Chakravartty)
12.00 - 12.15
micro-scale mechanical testing of fast neutron irradiated nuclear graphites
(Dong Liu, Peter Flewitt)
12.15 - 12.30
the effect of various factors on fracture toughness parameters of se(b)-type specimens
(Evgenia Anatolevna Kuleshova, Artem Dmitrievich Erak, Aleksei Sergeevich Kiselev)
12.30 - 12.45
understanding variation in jic measurements of ductile fracture toughness
(Peter B S Bailey, John Cookson)
12.45 - 13.00
fracture toughness of explosively welded al/ti layered material in cryogenic conditions
(Dariusz Boroński, Maciej Kotyk, Paweł Maćkowiak)
Session Programme
Weekly Programme
Weekly Programme
Track
Room
Chairman
Pegaso 2
Andra Pavan
Minisymposium - Functional fatigue, fracture and failure
analysis of shape memory alloys and devices
Antares
Mirco Chapetti
Pegaso 1
Thierry Auger
Cassiopea 1
H Daniel Wagner
Failure Analysis and Case Studies
Pegaso 3
Ferdinando Felli
Idra
Filippo Berto
Cassiopea 2
Kazuki
Shibanuma
Mizar
Nikolaos D.
Alexopoulos
Room
Pegaso 2
Chair
Andra Pavan
Track
Composites
14.30 - 14.45
feasibility study of adhesive bonding reinforcement by electrospun nanofibers
(Francesco Musiari, Alessandro Pirondi, Andrea Zucchelli, Giangiacomo Minak, Gregorio Giuliese,
Tommaso Maria Brugo, Claudia Ragazzini)
14.45 - 15.00
fatigue resistance of adhesive joints with laser treated substrates
(Fabrizio Moroni, Marco Alfano, Luca Romoli)
15.00 - 15.15
cohesive zone modelling and the fracture process of structural tape
(Ulf Stigh, Anders Biel, Daniel Svensson)
15.15 - 15.30
double cantilever beam test on a viscoelastic adhesive : effects of the loading rate
(Aurore Nicolas, Julien JUMEL)
15.30 - 15.45
experimental and numerical approach to crack propagation along designed heterogeneous
interface
(Michal Kazimierz Budzik, Alex Moberg, Henrik Myhre Jensen)
15.45 - 16.00
(discussion)
Session Programme
Weekly Programme
Room
Antares
Chair
Mirco Chapetti
Track
Minisymposium - Functional fatigue, fracture and failure analysis of shape memory alloys and
devices
14.30 - 14.45
thermomechanical fatigue of niti shape memory wires: effect loading, constraining and operating
conditions
(INVITED - Eugenio Dragoni, Giovanni Scirè Mammano)
14.45 - 15.00
enhancing niti alloy fatigue life: the new generation of sma wires
(INVITED - Alberto Coda)
15.00 - 15.15
thermomechanical fracture in shape memory alloys
(INVITED - Sameer Jape, Antonino Parrinello, Theocharis Baxevanis, Dimitris Lagoudas)
15.15 - 15.30
numerical comparison of fatigue criteria for niti cardiovascular devices
(INVITED - Lorenza Petrini, Wei Wu, Dario Allegretti, Francesco Migliavacca, Giancarlo Pennati)
15.30 - 15.45
fatigue of ni-ti shape memory wires
(Sebastián Jaureguizahar, Mirco Chapetti, Alejandro Yawny)
15.45 - 16.00
fatigue-properties of fe-28mn-6si-5cr-0.5nbc alloy
(Nobuo Nagashima, Takahiro Sawaguchi, Kazuyuki Ogawa)
Session Programme
Weekly Programme
Room
Pegaso 1
Chair
Thierry Auger
Track
14.30 - 14.45
susceptibility to stress corrosion cracking of titanium alloys exposed to deep eutectic solvents
(Francesco Nicassio, Gennaro Scarselli, Benedetto Bozzini)
14.45 - 15.00
a three-dimensional model of non-slipping stress corrosion cracking under low loads
(Longkui Zhu, Zhengcao Li, Lijie Qiao)
15.00 - 15.15
micro-mechanical environment/metal interaction models supplemented by crack path
information
(Yosef)
15.15 - 15.30
the effect of heat treatments on the constituent materials of a nuclear reactor pressure vessel in
hydrogen environment
(J. Toribio, D. Vergara, M. Lorenzo)
15.30 - 15.45
hydrogen embrittlement susceptibility of prestressing steel wires: the role of the cold-drawing
conditions
(J. Toribio, M. Lorenzo, D. Vergara)
15.45 - 16.00
crack propagation modeling for liquid metal embrittlement at the microstructure level
(Thierry Auger, Clotilde Berdin, Mathieu Bourcier, Samuel Hémery)
Session Programme
Weekly Programme
Room
Cassiopea 1
Chair
H Daniel Wagner
Track
14.30 - 14.45
brittle film-induced cracking of ductile substrates
(Tao Guo)
14.45 - 15.00
interfacial fracture of thin elastic layers due to cyclic friction contact
(Elena Torskaya, Alexey Mezrin)
15.00 - 15.15
the stress intensity factor of an inclined crack embedded in the central layer of an angle-ply
composite laminate
(Shu Li, Jianxiang Wang)
15.15 - 15.30
study of multi-cracking of brittle thin films and brittle/ductile multilayers on compliant substrate
(ILHEM BEN CHEIKH)
15.30 - 15.45
inspirational multiscale biological composites
(H Daniel Wagner)
15.45 - 16.00
a peridynamic model for ductile fracture of moderately thick plates
(Ugur Yolum, Ahmet Taştan, Mehmet A. Guler)
Session Programme
Weekly Programme
Room
Pegaso 3
Chair
Ferdinando Felli
Track
Failure Analysis and Case Studies
14.30 - 14.45
prediction of ductile fracture in anisotropic steels for pipeline applications
(Tommaso Coppola, Francesco Iob, Luca Cortese, Flavia Campanelli)
14.45 - 15.00
failure analysis of a motor vehicle coil spring
(Goran Vukelic, Marino Brcic)
15.00 - 15.15
analysis of the fracture criticality of biphasic brass
(Ferdinando Felli, Andrea Brotzu, Daniela Pilone)
15.15 - 15.30
critical issues on cast iron pipelines
(Ferdinando Felli, Carla Lupi)
15.30 - 15.45
comparison of analytical methods for the consideration of thermal stresses in the engineering
failure assessment
(Florian Dittmann, Igor Varfolomeev)
15.45 - 16.00
analysis of the impact of position in fatigue cracks on the fracture toughness of thick-walled
pressure vessel material
(Nedeljko Vukojević, Nenad Gubeljak, Muamer Terzić, Fuad Hadžikadunić)
Session Programme
Weekly Programme
Room
Idra
Chair
Filippo Berto
Track
14.30 - 14.45
interface delamination studied using advanced dic techniques
(Johan Hoefnagels, Andre Ruybalid, Sandra Kleinendorst, Benoît Blaysat, Jan Neggers, Marc Geers)
14.45 - 15.00
a multigrid finite difference solver for brittle fracture simulation using phase field method in
heterogeneous materials
(Hanfeng GU)
15.00 - 15.15
a gradient-elasticity approach to capture directionality and size effects
(JULIEN RETHORE, Thi Bach Tuyet Dang-Delattre)
15.15 - 15.30
fracture parameters determination of polyurethane materials for application of sed criteria to
notched components
(Alberto Piccotin, Liviu Marsavina, Filippo Berto, Radu Negru)
15.30 - 15.45
micromechanical study and simulation of the interlaminar failure of a woven composite laminate
(Luca Esposito, Giovanni Pio Pucillo, Francesco Penta)
15.45 - 16.00
variation of transitional functions in multiscale fatigue crack growth of superalloys
(Keke Tang, Filippo Berto, Hao Wu)
Session Programme
Weekly Programme
Room
Cassiopea 2
Chair
Kazuki Shibanuma
Track
14.30 - 14.45
microstructure and directional fatigue behavior of inconel 718 produced by selective laser melting
(Radomila Konečná, Gianni Nicoletto, Ludvík Kunz, Adrián Bača)
14.45 - 15.00
multiscale modeling to clarify the relationship between microstructures of steel and macroscopic
brittle crack propagation/arrest behavior
(Yuki Yamamoto, Kazuki Shibanuma, Fuminori Yanagimoto, Katsuyuki Suzuki, Shuji Aihara,
Hiroyuki Shirahata)
15.00 - 15.15
experimental and numerical investigation on relationship between grain size and arrest toughness
in steels
(Takuhiro Hemmi, Kazuki Shibanuma, Shuji Aihara, Katsuyuki Suzuki, Hiroyuki Shirahata)
15.15 - 15.30
the study of temperature and radiation induced degradation of cable polymers: a comparison
between the mechanical properties of industrial and neat epdm
(Tamara Sarac, Nicolas Quievy, Andrei Goussarov, Milan Konstantinovic)
15.30 - 15.45
15.45 - 16.00
Session Programme
Weekly Programme
Room
Mizar
Chair
Nikolaos D. Alexopoulos
Track
14.30 - 14.45
new measurement possibilities of deformation anomalies and complete stress field distributions
by portable digital-holographic gauge camera
(Ferenc Gyímesi, András Szigethy, Venczel Borbély, Rafael T. Kiss)
14.45 - 15.00
fatigue and fracture behaviour of AZ31b Mg alloy plastically deformed by constrained groove
pressing in the presence of overloads
(Enrico Salvati, Hongjia Zhang, Kai Soon Fong, Robert J.H. Paynter, Xu Song, Alexander M.
Korsunsky)
15.00 - 15.15
determination of a fatigue crack growth law and the influence of the local plasticity by using
digital image correlation
(Hosdez Jerome)
15.15 - 15.30
effect of artificial aging on the mechanical performance of (al-cu) 2024 and (al-cu-li) 2198
aluminum alloys
(Nikolaos D. Alexopoulos, Aggeliki Proiou, Theano Examilioti, Nikolai Kashaev, Stefan Riekehr,
Stavros K. Kourkoulis)
15.30 - 15.45
optimized design of surface mechanical testing procedures
(Gregory Favaro, Nick Bierwisch, Norbert Schwarzer)
15.45 - 16.00
Session Programme
Weekly Programme
Tuesday 21
Mizar
Virtual Poster Session
℃
Weekly Programme
low cycle fatigue behavior of alloy 617 weldments at 850 °C and 900°C
(SEON JIN KIM, RANDO TUNGGA DEWA, WOO GON KIM, EUNG SEON KIM)
fatigue life evaluation of rubber-clay nanocomposite
(Chang Su Woo, Hyun Sung Park)
peculiarities of shear deformation of gouge-filled faults
(Alexey Andreevich Ostapchuk, Dmitry Pavlov)
stress corrosion cracking of gas pipeline steels of different strength
(Olha Ivanivna Zvirko, Stepan Fedorovych Savula, Volodymyr Myroslavovych Tsependa, Giovanna
Gabetta, Hryhoriy Mykolayovych Nykyforchyn)
theoretical investigation of influence of peculiarities of internal structure on deformation and
fracture of metal-ceramic composites using discrete element approach
(Sergey V. Astafurov, Evgeny V. Shilko, Alexander S. Grigoriev, Vladimir E. Ovcharenko, Sergey G.
Psakhie)
fracture assessment of sharp v-notched components under mode ii loading: a comparison among
some recent criteria
(Alberto Campagnolo, Filippo Berto, Dominique Leguillon)
cohesive zone modeling of fatigue debonding/delamination: assessment of fatigue crack growth
rate dependence on cohesive zone parameters
(Alessandro Pirondi, Francesco Musiari, Fabrizio Moroni)
fatigue crack growth behaviour of the 6082-t6 aluminium using ct specimens with distinct notches
(José António Fonseca de Oliveira Correia, Ana Sofia Freitas Alves, Abílio Manuel Pinho De Jesus,
Grzegorz Lesiuk, Paulo José Silva Tavares, Pedro Miguel Guimarães Pires Moreira Fernandes
Monteiro)
Tuesday 21
Room Antares
Weekly Programme
deformation and fracture of metal ring samples under the explosion of conductors
(Svetlana Atroshenko, Victor Morozov, Anton Lukin, Yuri Petrov)
general estimation equations of transient c(t) under load and displacement control
(Han-Sang Lee, Dong-Jun Kim, Jin-Ho Je, Yun-Jae Kim, Robert A Ainsworth, Peter J Budden)
estimates of plastic ctod of circumferential internal surface cracks under internal pressure
(Youn-Young Jang, Jae-Uk Jeong, Nam-Su Huh, Ki-Seok Kim, Woo-Yeon Cho)
fracture toughness of austenitic stainless steels pipe bends fabricated by induction bending
(Jin Weon Kim, Mi Yeon Lee, Young Jin Oh, Heung Bae Park, Kyung Su Kim)
finite element simulation of creep crack growth using combined plastic-creep damage model
(Dong-Jun Kim, Kyung-Dong Bae, Han-Sang Lee, Yun-Jae Kim, Goon-Cherl Park)
the influence of plastic material property equations on the initial c(t) and j(t) in elastic-plasticcreep fe analysis
(So-Dam Lee, Han-Sang Lee, Myeong-Woo Lee, Yun-Jae Kim , Robert A Ainsworth, David W Dean)
physical mechanisms of heat-resistant bcc-lattice steels embrittlement under operation
conditions of water-moderated power reactors
(Dmitriy Andreevich Maltsev)
tensile strength of aluminum and iron matrices with nanoscale foreign inclusions: molecular
dynamic and continuum investigation
(Viktor Pogorelko, Alexander Mayer)
Tuesday 21
Room Pegaso 1
Weekly Programme
modelling mixed-mode fracture in pmma using peridynamics
(Francesco Caimmi, Elyas Haddadi, Naghdali Choupani, Claudia Marano, Luca Andena)
low cycle fatigue of cfrp laminated composites due to repeated out-of-plane loading
(Koji Fujimoto, Masahiro Hojo, Akira Fujita)
probabilistic failure analysis for glass components under general loading conditions
(Alberto Ramos, Miguel Muñiz-Calvente, María Jesús Lamela, Pelayo Fernández, Alfonso
Fernández-Canteli)
modelling the fracture resistance and self-blunting behaviour of stretched rubber
(Tino Millar, Gordon Williams, Daniel Balint)
fracture behaviour of ods ma956 steel at elevated and high temperatures
(Filip Siska, Ludek Stratil, Miroslav Smid, Natalia Luptakova, Tomas Zalezak, Denisa Bartkova, Ivo
Dlouhy)
fatigue crack initiation mechanisms in ultra-high strength steel
(Hayat Abdesselam)
fatigue crack propagation behavior of an old puddle iron including crack closure effects
(Grzegorz Lesiuk, Jose Correia, Abilio de Jesus, Paweł Kucharski)
the dynamic strength of concrete and macroscopic temporal parameter characterized in fracture
process.
(Nina Selyutina, Yuri Petrov)
Tuesday 21
Room Cassiopea 1
Weekly Programme
fretting fatigue induced surface cracks under shrink fitted main bearings in wind turbine rotor
shafts
(Thes Rauert, Jenni Herrmann, Peter Dalhoff, Manuela Sander)
fatigue and fracture mechanical behaviour of a wind turbine rotor shaft made of cast iron and
forged steel
(Jenni Herrmann, Thes Rauert, Peter Dalhoff, Manuela Sander)
regional distribution of opening angle and circumferential residual strains in the human aorta
(Stavros K Kourkoulis)
design and characterization of a small-scale solar sail deployed by niti shape memory actuators
(Girolamo Costanza, Maria Elisa Tata)
weldability of austenitic stainless steels by metal arc with different shielding gas
(Girolamo Costanza, Andrea Sili, Maria Elisa Tata)
assessing osteosynthesis techniques for pelvic fractures using digital image correlation
(M. Karanika, D. Georgiou, S. Darmanis, Α. Papadogoulas, E. D. Pasiou, S. K. Kourkoulis)
overload effects on damaging micromechanisms in ferritic, pearlitic and ferritic-pearlitic dcis
(Laura D'Agostino, Vittorio Di Cocco, Francesco Iacoviello)
fatigue microstructural evolution in pseudo elastic niti alloy
(Vittorio Di Cocco, Francesco Iacoviello, Stefano Natali)
Tuesday 21
Room Pegaso 3
Weekly Programme
the effect of hydrogen alloying on fracture peculiarities in high-carbon and high-nitrogen
austenitic steels
(Elena Astafurova, Galina Maier, Eugene Melnikov, Vera Koshovkina, Valentina Moskvina,
Gennady Zakharov)
dimensional stability of coarse-grained and submicrocrystalline tini shape memory alloy for
medical use under quasistatic and cyclic bending
(Oleg Kashin, Evgeni Dudarev, Aleksandr Lotkov, Victor Grishkov)
fatigue crack surface crystallographic orientation in aluminium alloy aa7050 from the interrupted
ageing and retrogression-reageing treatments
(André Luis Moreira de Carvalho, Juliana de Paula Martins, Enrico Salvati, Tan Sui, Alexander M.
Korsunsky)
magnetoelastic properties in polycrystalline ferromagnetic shape memory heusler alloys
(Mihaela Sofronie, Mihaela Sofronie, Felicia Tolea, Mihaela Valeanu)
effect of surface modification on the stability of oxide scales formed on tial intermetallic alloys at
high temperature
(Daniela Pilone, Andrea Brotzu, Ferdinando Felli)
the bi-material circular disc compressed between the jaws of the isrm standardized apparatus for
the brazilian test
(Ch. F. Markides, E. D. Pasiou, S. K. Kourkoulis)
an elastic-interface model for buckling-driven delamination growth in composite panels under
bending
(Stefano Bennati, Nicola Dardano, Paolo Sebastiano Valvo)
numerical prediction of ductile fracture resistance of welded joint zones
(Bashir Younise, Marko Rakin, Nenad Gubeljak, Bojan Medjo, Aleksandar Sedmak)
Tuesday 21
Room Idra
Weekly Programme
effect of t-stress on a nickel base superalloy under mode i fatigue crack propagation
(Besnik Sadriji)
md and continuum investigations of the surface relief influence on the spallation threshold
(Alexander E Mayer, Andrej A Ebel)
fatigue behaviour of cu-al-ni high temperature shape memory alloy
(Iñaki López-Ferreño)
investigations of ductile damage in dp600 and dc04 steel sheets during punching
(Kerim Isik, Gregory Gerstein, Florian Gutknecht, Till Clausmeyer, Florian Nürnberger, A. Erman
Tekkaya)
fast high cycle fatigue testing of sma actuator wires
(Jan Pilch, Petr Sittner, Lukas Kaderavek, Ludek Heller)
study of fatigue and fracture behavior on notched specimens by means of thermal methods
(Francesco Ancona, Giuseppe Pompeo Demelio, Rosa De Finis, Umberto Galietti, Davide Palumbo)
fatigue investigation at high load ratio r of a quenched and tempered chromium molybdenum
steel.
(Leonardo Bertini, Luca Le Bone, Ciro Santus, Francesco Chiesi, Leonardo Tognarelli)
the commercially pure ultra fine grained iron microstructure anisotropy influence in mechanical
properties measured by means of small punch test
(Barbara Romelczyk, Krzysztof Leczycki, Kamil Majchrowicz, Magdalena Plocinska, Mariusz
Kulczyk, Zbigniew Pakiela )
Tuesday 21
Room Cassiopea 2
Weekly Programme
effect of laser cladding repair on the fatigue behaviour of aluminium alloys
(Riccardo Nobile)
fatigue and corrosion fatigue fracture of mg alloys
(Evgeniy Vasil’ev, Mikhail Linderov, Elena Rzevskaya, Mikhail Markushev, Evgeniy Merson, Alexei
Vinogradov)
evaluation of a distributed fibre optic strain sensing system for full-scale fatigue testing
(Claire Davis, Meg Knowles, Geoff Swanton)
molecular dynamics simulation of electric pulse explosion of metal wires
(Konstantin Petrovich Zolnikov, Dmitrii Sergeevich Kryzhevich, Evgeny Viktorovich Shilko,
Alexander Vyacheslavovich Korchuganov)
testing and verification modeling of wave-shape formation under explosion welding to laminate
aa 2519-ti6al4v
(Ireneusz Szachogluchowicz, L. Sniezek, H. Sulym, M. Gloc)
fatigue strength of pf-1 coil helium inlet with weld defects
(Alexander Kazantsev, Merab Kahadze, Konstantin Soin, Igor Rodin, Sergey Nasluzov)
review of recent advances in local approaches applied to pre-stressed components under fatigue
loading
(Paolo Ferro, Filippo Berto, Neil James, T. Borsato)
investigation and modelling of the brittle fracture behaviour of polycrystalline tungsten
(Marco Conte, Jarir Aktaa)
Rooms Plan
Wednesday 22
Plenary
Invited Lectures
ever more singular: instability in dynamic fracture
(Jay Fineberg)
multiaxial fatigue: testing machines, failure criteria and life prediction
(Manuel Freitas)
very high cycle fatigue behaviour under constant and variable amplitude loading
(Manuela Sander, Thomas Muller, Carsten Stacker)
Rooms Plan
Weekly Programme
Wednesday 22 - Session 3.1
Track
Room
Chairman
Pegaso 2
Andrea Pavan
Minisymposium - Fracture in biomechanics: theoretical
and experimental approaches to the resistance of
biomaterials and
Antares
Guido La Rosa
Pegaso 1
Zhiliang Zhang
Fatigue cracks and short cracks growth
Cassiopea 1
Otmar Kolednik
Pegaso 3
Laszlo Tóth
Idra
Jianying He
Minisymposium - Fatigue crack initiation and propagation
in gigacycle regime
Cassiopea 2
Thierry Palin-Luc
Mizar
Andreas Ricoeur
Room
Pegaso 2
Chair
Andrea Pavan
Track
Composites
11.00 - 11.15
cohesive and xfem evaluation of adhesive failure for dissimilar single-lap joints
(Florin Adrian Stuparu, Dragos Alexandru Apostol, Dan Mihai Constantinescu, Catalin Radu Picu,
Marin Sandu, Stefan Sorohan)
11.15 - 11.30
modelling the peeling behavior of soft adhesives
(Idris K. Mohammed, Anthony J. Kinloch, Maria N. Charalambides)
11.30 - 11.45
characterising resistance to fatigue crack growth in adhesive bonds by measuring release of strain
energy.
(John-Alan Pascoe, R.C. Alderliesten, R. Benedictus)
11.45 - 12.00
modelling and predicting fatigue crack growth in structural adhesive joints
(Anthony James Kinloch, Rhys Jones, Wenchen Hu)
12.00 - 12.15
the partitioning of plastic energy in cutting tests
(Yatish Patel, Gordon Williams, L. Chang)
12.15 - 12.30
investigation of cutting resistance in stretched polymer films
(Tino Millar, Yatish Patel, Hongjian Andy Wang, Li Chang, Daniel Balint, Gordon Williams)
12.30 - 12.45
the influence of friction on delamination in fibre-reinforced composites. an sgbem
implementation.
(Jozef Ksinan, Roman Vodicka)
12.45 - 13.00
(discussion)
Session Programme
Weekly Programme
Room
Antares
Chair
Guido La Rosa
Track
Minisymposium - Fracture in biomechanics: theoretical and experimental approaches to the
resistance of biomaterials and
11.00 - 11.15
effect of micro-morphology of cortical bone on crack propagation: cohesive-element method
(Mayao Wang, Simin Li, Elizabeth A Zimmermann, Christoph Riedel, Björn Busse, Vadim V
Silberschmidt)
11.15 - 11.30
multiscale simulation of damage of bio-inspired composite structures.
(Lucas Leo Brely, Federico Bosia, Nicola Pugno)
11.30 - 11.45
numerical analysis of a custom-made pelvic prosthesis
(Guido La Rosa, Carmelo Clienti, Simone Di Bella, Fiorella Rizza)
11.45 - 12.00
development of a microstructural model for damage and failure in hard biomaterials with
hierarchical microstructure
(Ingo Scheider, Songyun Ma, Swantje Bargmann)
12.00 - 12.15
developing of a new device for static and dynamic tests of ni-ti instruments for canal root
(Guido La Rosa, Fabio Lo Savio, Eugenio Pedullà, Ernesto Rapisarda)
12.15 - 12.30
influence of heat-treatment on torsional resistance to fracture of nickel-titanium endodontic
instruments
(Guido La Rosa, Fabio Lo Savio, Eugenio Pedullà, Ernesto Rapisarda)
12.30 - 12.45
12.45 - 13.00
Session Programme
Weekly Programme
Room
Pegaso 1
Chair
Zhiliang Zhang
Track
11.00 - 11.15
the effect of grain boundary on the dislocation emission under hydrogen degradation
(Kai Zhao)
11.15 - 11.30
numerical simulation of grain boundary effects on hydrogen embrittlement of nickel alloys
(Haiyang Yu, Jim Stian Olsen, Jianying He, Zhiliang Zhang)
11.30 - 11.45
corrosion-induced hydrogen embrittlement and its degradation impact on the tensile properties
and fracture toughness of (al-cu-mg) 2024 alloy
(Nikolaos Alexopoulos, Wolfgang Dietzel)
11.45 - 12.00
detection, characterization and sizing of hydrogen induced cracking in pressure vessels using
phased array ultrasonic data processing
(R. Molica Nardo, D. Cerniglia, P. Lombardo, S. Pecoraro, A. Infantino)
12.00 - 12.15
interface instabilities of growing hydrides
(Per Stahle, Wureguli Reheman)
12.15 - 12.30
effects of kinetics on delamination and crack growth under conditions of hydrogen embrittlement
(Alla V. Balueva)
12.30 - 12.45
models for predicting hydrogen-induced degradation of high strength steels
(Zhiliang Zhang)
12.45 - 13.00
mechanical properties degradation of al-cu-li 2198 alloy due to corrosion exposure
(Nikolaos D. Alexopoulos, Angeliki Proiou, Wolfgang Dietzel, Carsten Blawert, Volker Heitmann,
Mikhail Zheludkevich, Stavros K. Kourkoulis)
Session Programme
Weekly Programme
Room
Cassiopea 1
Chair
Otmar Kolednik
Track
11.00 - 11.15
on the damage-tolerance of fcc medium- and high-entropy alloys at ambient to cryogenic
temperatures
(Bernd Gludovatz, Anton Hohenwarter, Qian Yu, Easo P. George, Robert O. Ritchie)
11.15 - 11.30
effect of pulsed electric current on the growth behavior of fatigue crack in al alloy
(Jaewoong Jung, Yang Ju, Yasuyuki Morita, Yuki Toku)
11.30 - 11.45
characterization of fatigue crack growth via configurational forces and j-integral for incremental
plasticity
(Walter Ochensberger, Otmar Kolednik)
11.45 - 12.00
fatigue crack growth near regions with differing stiffness
(Gunter Kullmer, Wadim Reschetnik, Britta Schramm, Hans Albert Richard)
12.00 - 12.15
effect of mean stress on small fatigue crack growth rate on low carbon steel with several
simulated haz heat treatment
(Hideaki Nishikawa, Yoshiyuki Furuya)
12.15 - 12.30
description of short fatigue crack propagation under low cycle fatigue regime
(Pavel Hutar, Ivo Kuběna, Miroslav Šmíd, Jan Poduška, Tomáš Kruml, Luboš Náhlík)
12.30 - 12.45
stage i fatigue cracking in mar-m 247 superalloy at elevated temperatures
(Miroslav Šmíd, Pavel Hutař, Vít Horník, Karel Hrbáček, Ludvík Kunz)
12.45 - 13.00
statistical distributions and intervals for fatigue crack growth curves and residual lifetime
assessment
(Hans-Peter Gänser, Stefan Kolitsch, Jürgen Maierhofer)
Session Programme
Weekly Programme
Room
Pegaso 3
Chair
Laszlo Tóth
Track
11.00 - 11.15
on monitoring of mechanical characteristics of rolled electrolytic copper
(Donka Angelova, Rozina Yordanova, Svetla Yankova)
11.15 - 11.30
study on degradation of electrolyte membrane for pefc
(Akira Ueno, T. Takane, F. Ueno)
11.30 - 11.45
fatigue cracking in high-strength cold-drawn pearlitic steel wires for anchorage in rocks
(Jesus Toribio, Beatriz González, Juan-Carlos Matos)
11.45 - 12.00
near-interface-cracking in coated wc-co hard metals triggered by local plastic deformation
(Thomas Klünsner, Martin Krobath, Werner Ecker, Stefan Marsoner, Marcus Morstein, Bodo
Marklein)
12.00 - 12.15
multiscale modeling of low friction sliding behavior of polymer matrix nanocomposite.
(Andrey I. Dmitriev, Anton Yu. Nikonov, Werner Österle)
12.15 - 12.30
static and dynamic response of titanium alloy produced by electron beam melting
(Giuseppe Mirone, Raffaele Barbagallo, Domenico Corallo, Simone Di Bella)
12.30 - 12.45
materials: as the simplest self-organised systems
(Laszlo Tóth)
12.45 - 13.00
thermal load-induced notch stress intensity factors derived from averaged strain energy density
(Paolo Ferro, Filippo Berto, T. Borsato)
Session Programme
Weekly Programme
Room
Idra
Chair
Jianying He
Track
11.00 - 11.15
structures and properties of low angle grain boundaries in lithium niobate
(Atsutomo Nakamura)
11.15 - 11.30
modelling crack patterns developped on nano-depth etched silicon anode
(Katerina E Aifantis, Julien Rethore)
11.30 - 11.45
fracture toughness determination by repetitive nano-impact testing in cu/w nanomultilayers with
length-scale-dependent films properties
(Emilio Frutos Torres, M. Karlik, T. Polcar)
11.45 - 12.00
tensile fracture of integrated single-crystal silicon nanowire using mems electrostatic testing
device
(Toshiyuki Tsuchiya, Tetsuya Hemmi, Yoshikazu Hirai, Osamu Tabata)
12.00 - 12.15
fracture of nanostructure metal coated polymer particles
(Jianying He)
12.15 - 12.30
effect of crystallographic orientations on fractures and slip occurrences at 500 °c of (110) single
crystal silicon microstructures
(Akio Uesugi, Yoshikazu Hirai, Toshiyuki Tsuchiya, Osamu Tabata)
12.30 - 12.45
probing nanoscale ice detaching mechanics using molecular dynamics simulations
(Senbo Xiao, Jianying He, Zhiliang Zhang)
12.45 - 13.00
molecular dynamics simulation of fracture in amorphous lisi alloys as battery anode material
(S. Mostafa Khosrownejad)
Session Programme
Weekly Programme
Room
Cassiopea 2
Chair
Thierry Palin-Luc
Track
Minisymposium - Fatigue crack initiation and propagation in gigacycle regime
11.00 - 11.15
very high cycle fatigue resistance of the low alloyed steel 42crmo4 in medium- and high-strength
quenched and tempered condition
(Karl-Heinz Lang, Marcus Korn, Thomas Rohm)
11.15 - 11.30
self-heating measurements for a dual-phase steel under ultrasonic fatigue loading for stress
amplitudes below the conventional fatigue limit
(Noushin Torabian, Véronique Favier, Saeed Ziaei-Rad, Frédéric Adamski, Justin Dirrenberger,
Nicolas Ranc)
11.30 - 11.45
very high cycle fatigue of high-strength steels: crack initiation by fga formation investigated at
artificial defects
(Daniel Spriestersbach, Alexander Brodyanski, Jörg Lösch, Michael Kopnarski, Eberhard Kerscher)
11.45 - 12.00
real time monitoring of fatigue crack initiation in armco iron under vhcf loading
(Aleksandr Evgenievich Prokhorov, Aleksei Nikolaevich Vshivkov, Oleg Anatolievich Plekhov,
Vincenso Crupi)
12.00 - 12.15
vhcf strength decrement in large h13 steel specimens subjected to esr process
(Andrea Tridello, Davide Salvatore Paolino, Giorgio Chiandussi, Massimo Rossetto)
12.15 - 12.30
effects of microstructure and surface roughness on the fatigue strength of high-strength steels
(Junbiao Lai, Hanzheng Huang, Wijbe Buising)
12.30 - 12.45
influence of intrinsic and artificial defects on the vhcf properties of 17-4ph stainless steel
(Bernd M. Schönbauer, Keiji Yanase, Masahiro Endo)
12.45 - 13.00
fatigue crack initiation life, or the governing entity in the giga-cycle regime process
(Yosef Katz)
Session Programme
Weekly Programme
Room
Mizar
Chair
Andreas Ricoeur
Track
11.00 - 11.15
microcrack-based continuum damage model with application towards graded refractories
(Janto Gundlach, Johannes Scheel, Andreas Ricoeur)
11.15 - 11.30
effect of specimen geometry and press fit on the stress intensity factor solution for scaled
wheelset axles under bending
(Robert Hannemann, M. Sander)
11.30 - 11.45
improvements of strength and fracture toughness by utilizing spatial variations of the yield stress
(Masoud Sistaninia, Otmar Kolednik)
11.45 - 12.00
effect of solutes on crack tip dislocation emission in multicomponent solid solutions
(Predrag Andric, William Curtin)
12.00 - 12.15
unit cell simulations and porous plasticity modelling for generic fcc textures
(Lars Edvard Bryhni Dæhli, Jonas Faleskog, Tore Børvik, Odd Sture Hopperstad)
12.15 - 12.30
prediction of ductile failure using models calibrated from micromechanical simulations
(Jens Kristian Holmen, Lars Edvard Dæhli, Odd Sture Hopperstad, Tore Børvik)
12.30 - 12.45
a simple and efficient x-fem approach for non-planar fatigue crack propagation
(Shu Yixiu, Li Yazhi)
12.45 - 13.00
new analytic criterion for porous solids with pressure-insensitive matrix governed by an yield
criterion involving the third-invariant of the stress deviator
(Oana Cazacu, Benoit Revil-Baudard)
Session Programme
Weekly Programme
Weekly Programme
Track
Room
Chairman
Pegaso 2
Andrea Pavan
Antares
Donato Firrao
Minisymposium - Dissimilar metal welds degradation
phenomena and inspection
Pegaso 1
Vittorio Di Cocco
Cassiopea 1
Alberto Sapora
Pegaso 3
Andrea Spagnoli
Minisymposium - Deformation and fracture at high strain
rate
Idra
Nicola Bonora
Cassiopea 2
Antonino
Risitano
Mizar
Carmine Maletta
Room
Pegaso 2
Chair
Andrea Pavan
Track
Composites
14.30 - 14.45
fracture of high-density polyethylene for bleach bottles
(Marco Contino, Andrea Colombo, Luca Andena, Marta Rink, Giuliano Marra)
14.45 - 15.00
fracture mechanics testing for environmental stress cracking in thermoplastics
(Muhammad Ayyub Kamaludin, Y. Patel, Bamber R K Blackman, James G Williams)
15.00 - 15.15
fatigue mechanisms in short glass fibre reinforced thermoplastic: in situ x-ray microtomography
observations and microstructure modelling
(Héloïse Rolland, Nicolas Saintier, Gilles Robert, Charles Mareau)
15.15 - 15.30
on the damage tolerance of bio-inspired silicon carbide / polymer composites
(Bernd Gludovatz, Valentina Naglieri, Antoni P. Tomsia, Robert O. Ritchie)
15.30 - 15.45
the influence of the mould injection direction flow and the crystalline orientation factor of
semicrystalline polymers on damage evolution and fracture: a fem simulation approach
(Bernardo MORA VILLALOBOS, Emmanuel PAGNACCO, Leila KHALIJ)
15.45 - 16.00
Session Programme
Weekly Programme
Room
Antares
Chair
Donato Firrao
Track
14.30 - 14.45
measurement of local brittle fracture stress for dynamic crack propagation in steel
(Fuminori Yanagimoto, Kazuki Shibanuma, Tomoya Kawabata, Katsuyuki Suzuki, Shuji Aihara)
14.45 - 15.00
surface roughness investigation of ultrafine-grained aluminum alloy subjected to high speed
erosion
(Nikita Kazarinov)
15.00 - 15.15
shock-induced instability and dynamic strength of brittle solids
(Yurii Ivanovich Meshcheryakov)
15.15 - 15.30
modeling of brittle crack propagation/arrest behavior in steel plate
(Kazuki Shibanuma, Fuminori Yanagimoto, Tetsuya Namegawa, Katsuyuki Suzuki, Shuji Aihara)
15.30 - 15.45
15.45 - 16.00
Session Programme
Weekly Programme
Room
Pegaso 1
Chair
Vittorio Di Cocco
Track
Minisymposium - Dissimilar metal welds degradation phenomena and inspection
14.30 - 14.45
evaluation of fatigue crack propagation in dissimilar al/steel friction stir welds
(Toshifumi Kakiuchi, Yoshihiko Uematsu, Kentaro Suzuki)
14.45 - 15.00
modelling of phased array ultrasonic inspection of a steam generator dissimilar metal weld
(Szabolcs Szávai, Zoltán Bézi, Judit Dudra, István Méhész)
15.00 - 15.15
material characterization and numerical simulation of a dissimilar metal weld
(Szabolcs Szávai, Zoltán Bézi, Peter Rózsahegyi)
15.15 - 15.30
tearing resistance of heterogeneous interface region of a dissimilar metal weld characterised
with sub-sized single edge bend specimens
(Sebastian Kjell Kristoffer Lindqvist)
15.30 - 15.45
15.45 - 16.00
Session Programme
Weekly Programme
Room
Cassiopea 1
Chair
Alberto Sapora
Track
14.30 - 14.45
a numerical procedure for the simulation of cracking processes based on the energy-stress
criterion
(Jia Li, Dominique Leguillon)
14.45 - 15.00
evolution of crack density in cross-ply laminates. application of a coupled stress and energy
criterion.
(Maria Kashtalyan, Israel G. García, Vladislav Mantic)
15.00 - 15.15
modelling of fibre-matrix debond onset and growth by finite fracture mechanics at elastic
interfaces using abaqus user subroutine umat
(María del Mar Muñoz-Reja, Luis Tavara, Vladislav Mantic)
15.15 - 15.30
15.30 - 15.45
15.45 - 16.00
Session Programme
Weekly Programme
Room
Pegaso 3
Chair
Andrea Spagnoli
Track
14.30 - 14.45
measurement of crack propagation rate of cleavage fracture and the role of grain boundary in 3%
silicon iron
(Nakanishi Daiki)
14.45 - 15.00
mode i fracture toughness of fibre-reinforced concrete by means of a modified version of the
two-parameter model
(Sabrina Vantadori, Andrea Carpinteri, Giovanni Fortese, Camilla Ronchei, Scorza Daniela)
15.00 - 15.15
fracture mechanics based determination of the fatigue strength of weldments
(Dietmar Klingbeil, Uwe Zerbst and Mauro Madia)
15.15 - 15.30
monte carlo simulation to predict fracture initiation in mild steel
(Yoshiki Nemoto, Kazuki Shibanuma, Katsuyuki Suzuki, Shuji Aihara)
15.30 - 15.45
multiaxial fatigue crack propagation of an edge crack in a cylindrical specimen undergoing
combined tension-torsion loading
(Raffaele Sepe, Roberto Citarella, Ivan Ishtyryakov, Venanzio Venanzio)
15.45 - 16.00
coupled fem-dbem simulation of 3d crack growth under fatigue load spectrum
(Raffaele Sepe, Roberto Citarella, Marcello Lepore, Michele Perrella, Gabriele Cricrì)
Session Programme
Weekly Programme
Room
Idra
Chair
Nicola Bonora
Track
Minisymposium - Deformation and fracture at high strain rate
14.30 - 14.45
effect of loading rate on ductille to brittle transition temperature on 20mnmoni55 steel
(Avinash Gopalan, Abhishek Tiwari, Saurav Sunil, Ram Niwas Singh, Per Ståhle, Jayanta Kumar
Chakravartty)
14.45 - 15.00
a rate-dependent phase field model for the modelling of high inertia effects in dynamic brittle
fracture
(Antonino Francesco Parrinello, Eliot Fried, Nik Petrinic)
15.00 - 15.15
effects of strain rate on mechanical properties in tension of a commercial aluminium alloy used in
armour applications
(Ezio Cadoni, Matteo Dotta, Daniele Forni, Hanspeter Kaufmann)
15.15 - 15.30
cybernetic model of the shock-induced wave evolution in solids
(Tatiana Aleksandrovna Khantuleva, Aleksandr Lvovich Fradkov)
15.30 - 15.45
deformation and fracture of metal ring samples under the explosion of conductors
(V.A. Morozov, A.A. Lukin, S.A. Atroshenko, D.A. Gribanov, V. Petrov Yu)
15.45 - 16.00
viscoelastic modelling of the pullout test of synthetic fibres treated with nano-silica
(Enrico Radi, Luca Lanzoni, Andrea Sorzia)
Session Programme
Weekly Programme
Room
Cassiopea 2
Chair
Antonino Risitano
Track
14.30 - 14.45
break-down of fracture continuum mechanics in nanometer material
(Takayuki Kitamura, Takashi Sumigawa, Takahiro Shimada)
14.45 - 15.00
the loss of capacity for work of nanosized plates with defects
(A. Kochnev, Nikita Morozov, Ilya Ovidko, Boris Semenov)
15.00 - 15.15
the limits of strength and toughness: a lesson from nanostructured metals
(Reinhard Pippan, Anton Hohenwarter, Bernhard Völker, Marlene Kapp)
15.15 - 15.30
detection of phenomena of local plasticization in concrete subjected to compression loads
(A. Risitano, A. D’Aveni, G. Fargione, C. Clienti)
15.30 - 15.45
15.45 - 16.00
Session Programme
Weekly Programme
Room
Mizar
Chair
Carmine Maletta
Track
devices
14.30 - 14.45
investigation on fatigue behaviors of niti polycrystalline strips under strain-controlled tension
with in-situ lüders-band observation
(Lin ZHENG, Yongjun HE, Ziad MOUMNI)
14.45 - 15.00
influence of thermal cycling on the phase transformation temperatures and latent heat of a niti
shape memory alloy
(Tomé Seichi da Nóbrega Guenka, Régis Santana Rocha, Edson Paulo da Silva, Tadeu Castro da
Silva)
15.00 - 15.15
study of nanostructure surface layers made of materials with shape memory effect in view of
technologucal succession
(Zhesfina Michailovna Blednova, Peter Olegovich Rusinov, Maria Bezmogorychnaya)
15.15 - 15.30
frequency effect on cyclic behavior and low-cycle fatigue of pseudoelastic shape memory alloys
(Yahui ZHANG)
15.30 - 15.45
functional fatigue of laser welded niti shape memory alloys subjected to high strain cycling
(João Pedro Oliveira)
15.45 - 16.00
rotary bending fatigue analysis of shape memory alloys
(Maede Hessami, Laurent Pino, Luc Saint-Sulpice, Vincent Legrand, Mahmoud Kadkhodaei,
Shabnam Arbab Chirani, Sylvain Calloch)
Session Programme
Weekly Programme
Weekly Programme
Track
Room
Chairman
Fracture & Damage
Pegaso 2
Giuseppe Ferro
Antares
Francesco
Iacoviello
Pegaso 1
Luca Susmel
in gigacycle regime
Cassiopea 1
Martina
Zimmermann
Pegaso 3
Jesus Toribio
rate
Idra
Giacomo
Risitano
assessment
Cassiopea 2
Vincenzo Crupi
Mizar
Vittorio Di Cocco
Room
Pegaso 2
Chair
Giuseppe Ferro
Track
Fracture & Damage
16.30 - 16.45
phase transition of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (hmx) under static
compression: an application of first-principles method specialized for molecular crystals
(Lei Zhang, Sheng-Li Jiang, Jun Chen)
16.45 - 17.00
influence of radiation damage on crack opening in bcc iron
(Aleksandr Korchuganov, Konstantin Zolnikov, Dmitrij Kryzhevich, Vyacheslav Chernov, Evgeny
Shilko)
17.00 - 17.15
peridynamic model and simulation of strain softening in elastic damage problems
(Linjuan Wang, Jianxiang Wang)
Session Programme
Weekly Programme
Room
Antares
Chair
Francesco Iacoviello
Track
16.30 - 16.45
engineering framework to utilize miniaturized charpy type se(b) specimens to predict jc of full
sized specimens
(Teruhiro Yamaguchi, Toshiyuki Meshii, Hideki Yuya, Kazuto Nakadate, Katsuya Taguchi, Yuriko
Inoue, Kazuhiro Takahashi, Katsuki Yoshioka, Yoshihiro Saeki, Hiroaki Kurishita)
16.45 - 17.00
surface and through thickness crack growth in cruciform specimens subjected to biaxial loading
(Alexander Zakharov, Valery Shlyannikov, Anastasiya Gerasimenko)
17.00 - 17.15
Session Programme
Weekly Programme
Room
Pegaso 1
Chair
Luca Susmel
Track
16.30 - 16.45
structural mechanisms of formation of adiabatic shear bands
(Mikhail Sokovikov, Dmitry Bilalov, Vladimir Oborin, Vasilij Chudinov, Sergey Uvarov, Yriy
Bayandin, Oleg Naimark)
16.45 - 17.00
modeling slant ductile fracture in drop weight tear test
(Takahiro SAKIMOTO, Jacques Besson, Yazid Madi, Vladislav Yastrebov, Satoshi Igi, Kenji Oi)
17.00 - 17.15
strain and damage interactions during tearing: 3d in situ measurements and simulations for a
ductile alloy (aa2139 t3)
(Thilo F. Morgeneyer, Thibault Taillandier-Thomas, Lukas Helfen, Francois Hild)
Session Programme
Weekly Programme
Room
Cassiopea 1
Chair
Martina Zimmermann
Track
16.30 - 16.45
experimental investigation of crack initiation and propagation in gigacycled regime
(Aleksandr Evgenievich Prokhorov, Aleksey Nikolaevich Vshivkov, Oleg Anatolievich Plekhov)
16.45 - 17.00
effect of martensite content and geometry of inclusions on the vhcf properties of predeformed
metastable austenitic stainless steels
(Andrei Grigorescu, Anton Kolyshkin, Martina Zimmermann, Hans-Jürgen Christ)
17.00 - 17.15
Session Programme
Weekly Programme
Room
Pegaso 3
Chair
Jesus Toribio
Track
16.30 - 16.45
16.45 - 17.00
17.00 - 17.15
towards a unified and practical industrial model for prediction of hydrogen embrittlement and
damage in steels
(Milos B Djukic, Gordana M Bakic, Vera Sijacki Zeravcic, Bratislav Rajicic, Aleksandar Sedmak,
Radivoje Mitrovic, Zarko Miskovic)
the quantitative features of the low-temperature cleavage and the hydrogen-assisted quasicleavage fracture surfaces in the low-carbon steel.
(Evgeniy Merson, Alexander Kudrya, Victor Trachenko, Dmitry Merson, Vladimir Danilov, Alexei
Vinogradov)
Session Programme
Weekly Programme
Room
Idra
Chair
Giacomo Risitano
Track
16.30 - 16.45
elasto-plasto-dynamic responses of cracked tubes to internal high-speed moving pressures
(Majid Mirzaei, Saharnaz Tavkoli, Mahdi Najafi)
16.45 - 17.00
fracture property evaluation using indentation impact test
(Seunghun Choi, Won-Je Jo, Woojo Kim, Dongil Kwon)
17.00 - 17.15
Session Programme
Weekly Programme
Room
Cassiopea 2
Chair
Vincenzo Crupi
Track
16.30 - 16.45
new technique for measurement of the energy balance during quasi-static tension of the metal
(Aleksei Vshivkov, Anastasiia Iziumova, Oleg Plekhov)
16.45 - 17.00
effective intrinsic dissipation as a damage indicator during cyclic loading
(Qiang GUO, Xinglin Guo, Wenping Yang)
17.00 - 17.15
Session Programme
Weekly Programme
Room
Mizar
Chair
Vittorio Di Cocco
Track
devices
a three-dimensional macroscopic fully thermomechanically coupled constitutive model for shape
memory alloy under thermomechanical cyclic loading
(Mahmoud Barati, Guillaume Helbert, Luc Saint-Sulpice, Mahmoud Kadkhodaei, Shabnam Arbab
Chirani, Sylvain Calloch)
16.30 - 16.45
16.45 - 17.00
enhance fatigue resistance of niti shape memory alloy by grain size gradient structure
(Minglu Xia, Qingping Sun)
17.00 - 17.15
comparative study of bending behaviour and cyclic fatigue resistance of new generation niti
endodontic instruments
(Laurent Pino, Valérie Chevalier, Charlotte Gouedard, Sébastien Petit, Shabnam Arbab Chirani,
Sylvain Calloch)
Session Programme
Weekly Programme
Rooms Plan
Thursday 23
Plenary
Invited Lectures
fracture mechanics in biology and medicine
(David Taylor)
frontiers in the lifetime prediction of superelastic nitinol
(Tom Duerig, Craig Bonsignore, Ali Shamimi)
memory effects in variable amplitude and multiaxial fatigue crack growth : an incremental
approach
(S. Pommier)
Rooms Plan
Weekly Programme
Thursday 23 - Session 4.1
Track
Room
Chairman
Pegaso 2
Vladislav Mantic
Antares
Ausonio Tuissi
Ductile Fracture
Pegaso 1
Claudio Ruggieri
Fatigue Resistance of metals
Cassiopea 1
Giovanni
Meneghetti
Pegaso 3
Andrea Spagnoli
Concrete & Rocks
Idra
Giuseppe Ferro
in gigacycle regime
Cassiopea 2
Martina
Zimmermann
Minisymposium - Creep and fracture at elevated
temperature
Mizar
Luca Esposito
Room
Pegaso 2
Chair
Vladislav Mantic
Track
11.00 - 11.15
brittle failure in adhesive lap joints – a general finite fracture mechanics approach
(Nicolas Stein, Philipp Weißgraeber, Wilfried Becker)
11.15 - 11.30
crack deflection in brittle materials by finite fracture mechanics
(Alberto Sapora, Pietro Cornetti, Alberto Carpinteri, Vladislav Mantic)
11.30 - 11.45
multicracking of an oxidized polymeric layer – a ffm approach
(Dominique Pierre Leguillon, Marie-Christine Lafarie-Frenot, Yannick Pannier, Eric Martin)
11.45 - 12.00
a coupled ffm model to interpret fracture toughness values for brittle materials
(Donato Firrao, Paolo Matteis, Alberto Sapora, Pietro Cornetti, Alberto Carpinteri)
12.00 - 12.15
a numerical finite fracture mechanics approach on asymmetric cracks in open-hole plates
(Philipp Rosendahl, Philipp Weißgraeber, Nicolas Stein, Wilfried Becker)
12.15 - 12.30
on the energy release rate in 3-d in the context of finite fracture mechanics
(Zohar Yosibash)
12.30 - 12.45
some thoughts on the role of microstructure in finite fracture mechanics
(David Taylor)
12.45 - 13.00
the theory of critical distances to estimate static and dynamic strength of notched plain concrete
(Iason Pelekis, Luca Susmel)
Session Programme
Weekly Programme
Room
Antares
Chair
Ausonio Tuissi
Track
devices
11.00 - 11.15
structural fatigue of superelastic niti near stress-induced martensitic transformation
(INVITED - Ludek Heller)
11.15 - 11.30
assessing fatigue damage in shape memory alloys by instrumented indentation
(Carmine Maletta, Franco Furgiuele, Fabrizio Niccoli, Emanuele Sgambitterra)
11.30 - 11.45
mechanical cycling testing of shape memory alloys at micro-scale for reliable mems applications
(INVITED - Gabriel A. López, José F. Gómez-Cortés, José San Juan, María L. Nó)
11.45 - 12.00
enviromentally assisted fatigue of superelastic niti wires and springs
(Petr Sittner, Jan Racek, Barbora Marešová, Lukáš Kadeřávek, Luděk Heller)
12.00 - 12.15
effect of non-metallic and intermetallic inclusions on the crater formation on the surface of tini
alloys under the electron-beam impact
(Vladimir Rotshtein, Alexey Markov, Stanislav Meisner, Evgenii Yakovlev, Filipp D'yachenko)
12.15 - 12.30
effect of thermal treatments in ni-fe-ga and ni-mn ga melt spun ribbons with co and al
substitutions
(Felicia Tolea, Mihaela Sofronie, Alina Crisan, Bogdan Popescu, Mihaela Valeanu)
12.30 - 12.45
hydrogen-induced failure of tini-based alloy with coarse-grained and ultrafine- grained structure.
(Anatolii Baturin, Aleksandr Lotkov, Victor Grishkov, Ivan Rodionov, Konstantin Krukovskiy)
12.45 - 13.00
fatigue of superelastic NiTi wires with different plateau strain
(Ondrej Tyc, J. Pilch, P. Sittnar)
Session Programme
Weekly Programme
Room
Pegaso 1
Chair
Claudio Ruggieri
Track
11.00 - 11.15
application of a new cleavage fracture framework to ferritic steels
(Marc Scibetta)
11.15 - 11.30
the cohesive model application to the micro-crack nucleation and growth
(Jaroslaw Galkiewicz)
11.30 - 11.45
numerical simulation of ductile rupture at low triaxialities using an extended gurson-type model
including void shape effects
(Jean-Baptiste Leblond, Leo Morin, Dirk Mohr, Viggo Tvergaard)
11.45 - 12.00
ductile or brittle fracture of a two-phase material? a competition between two microstructural
damage mechanisms
(Tom de Geus, Ron Peerlings, Marc Geers)
12.00 - 12.15
the use of se(t) specimen fracture toughness for ffs assessment of defects in low constraint
conditions
(Jae Jun Han, Nicolas Oscar Larrosa, Robert Anthony Ainsworth, Yun Jae Kim)
12.15 - 12.30
application of coupled damage and beremin model to ductile-brittle transition temperature
region considering constraint effect
(Kiminobu Hojo, Naoki Ogawa, Takatoshi Hirota, Kentaro Yoshimoto, Yasuto Nagoshi, Shinichi
Kawabata)
12.30 - 12.45
modified shape of dynamic master curves due to adiabatic effects
(Thomas Reichert, Wolfgang Böhme, Johannes Tlatlik)
12.45 - 13.00
application of local approach mibf fracture toughness model to an rpv steel: effects of the
microstructure characteristics of the steel
(Pierre FORGET, Bernard MARINI, Ludovic VINCENT)
Session Programme
Weekly Programme
Room
Cassiopea 1
Chair
Giovanni Meneghetti
Track
11.00 - 11.15
effect of in-mould inoculant composition on microstructure and fatigue behaviour of heavy
section ductile iron castings
(Thomas Borsato, Filippo Berto, Paolo Ferro, Carlo Carollo)
11.15 - 11.30
fatigue limit of ti6al4v alloy produced by selective laser sintering
(Matteo Benedetti, Marco Cazzolli, Vigilio Fontanari, Matteo Leoni)
11.30 - 11.45
fatigue characterization of titanium ti-6al-4v samples produced by additive manufacturing
(Victor Chastand, Astrid Tezenas, Yannick Cadoret, Philippe Quaegebeur, Wilson Maia, Eric
Charkaluk)
11.45 - 12.00
low cycle fatigue behaviour of ex-service p92 steel at elevated temperature
(Nasrul Azuan Alang, Catrin Mair Davies, Kamran M Nikbin)
12.00 - 12.15
a twin-disc test rig for contact fatigue characterization of gear materials
(Giovanni Meneghetti, Andrea Terrin)
12.15 - 12.30
how microscopic stress and strain analysis can improve the understanding of the interplay
between material properties and variable amplitude fatigue
(Matthias Thielen, Michael Marx, Meisam Sheikh-Amiri, Christian Motz)
12.30 - 12.45
a new approach for the analytical hcf strength assessment of components from nickel-base alloys
(Milan Peschkes, Jochen Höhbusch, Henning Haensel, Jan Scholten)
12.45 - 13.00
microstructure-based study of the crack initiation mechanisms in pure copper under high cycle
multiaxial fatigue loading conditions
(Komlan Agbessi, Nicolas Saintier, Thierry Palin-Luc)
Session Programme
Weekly Programme
Room
Pegaso 3
Chair
Andrea Spagnoli
Track
11.00 - 11.15
finite element model to simulate crack propagation based on local fracture stress criterion
(Yo Nishioka, Kazuki Shibanuma, Katsuyuki Suzuki, Fuminori Yanagimoto)
11.15 - 11.30
validation of contour integral functions in abaqus v6.11-v6.14 for combined mechanical and
residual stresses
(Yuebao Lei)
11.30 - 11.45
simplified limit load estimation using ma-tangent method for branch pipe junctions under internal
pressure and in-plane bending
(Sang-Hyun Kim, Jae-Min Gim, Wang Miao , Yun-Jae Kim)
11.45 - 12.00
strength of water-filled permeable elastic-plastic medium under shear accompanied by
compression: a theoretical study
(Andrey V. Dimaki, Evgeny V. Shilko, Sergey G. Psakhie)
12.00 - 12.15
computational techniques to predict crack growth in nonlinear viscoelastic materials
(Sebnem Ozupek, Cagri Iyidiker)
12.15 - 12.30
12.30 - 12.45
12.45 - 13.00
Session Programme
Weekly Programme
Room
Idra
Chair
Giuseppe Ferro
Track
Concrete & Rocks
11.00 - 11.15
failure analysis of concrete frame - a numerical analysis
(Abdoullah Namdar)
11.15 - 11.30
a numerical investigation on soil-concrete foundation interaction
(Abdoullah Namdar)
11.30 - 11.45
influence of composition variations on the fracture behaviour of self-compacting concrete
(wajde alyhya)
11.45 - 12.00
experimental validation and fracture properties analysis on wedge splitting concrete specimens
with different initial seam-height ratios
(HU Shaowei, XU Aiqing)
12.00 - 12.15
carbon nanotube reinforced mortar as a sensor to monitor the structural integrity of restored
marble epistyles under shear
(Zoi S. Metaxa, E.D. Pasiou, I. Dakanali, I. Stavrakas, D. Triantis, S.K. Kourkoulis)
12.15 - 12.30
new iterative method to obtain the softening curve in concrete
(Javier Gomez, Miguel Angel Martín-Rengel, Jesús Ruiz-Hervías, Adel Fathy, Filippo Berto)
12.30 - 12.45
study of the influence of the oxide and concrete parameters on the results of accelerated
corrosion tests
(Beatriz Sanz, Jaime Planas, José María Sancho)
12.45 - 13.00
fiber volume fraction and ductility index in fiber-reinforced concrete round determined panel
(Alessandro Pasquale Fantilli, Andrea Gorino, Bernardino Chiaia)
Session Programme
Weekly Programme
Room
Cassiopea 2
Chair
Martina Zimmermann
Track
11.00 - 11.15
a probabilistic model on crack initiation modes of metallic materials in very high cycle fatigue
(Tatsuo Sakai, D.G. Harlow)
11.15 - 11.30
development of a probabilistic model for the prediction of fatigue life in the very high cycle
fatigue (vhcf) range based on inclusion population
(Anton Kolyshkin, Andrei Grigorescu, Martina Zimmermann, Hans-Jürgen Christ)
11.30 - 11.45
stationary vibrations and fatigue failure of the elastic disks of variable thickness
(Ilia Nikitin, Nikolay Burago, Pavel Yushkovsky)
11.45 - 12.00
computation of and testing crack growth at 20 khz load frequency
(Mohamed Sadek, Jens Bergström, Nils Hallbäck, Christer Burman)
12.00 - 12.15
modeling and simulation of the cyclic plastic deformation of austenitic stainless steels at stress
amplitudes below the vhcf limit
(Philipp-Malte Hilgendorff, Andrei Grigorescu, Martina Zimmermann, Claus-Peter Fritzen, HansJürgen Christ)
12.15 - 12.30
mechanisms inhibiting short fatigue crack propagation at loading amplitudes close to the
conventional fatigue limit
(Benjamin Dönges, Claus-Peter Fritzen, Hans-Jürgen Christ)
12.30 - 12.45
numerical investigation of damage behavior of gfrps in the very high cycle regime
(Hinesh Madhusoodanan)
12.45 - 13.00
vhcf crack initiation mechanisms in different engineering alloys
(Muhammad Waqas Tofique, Jens Bergström, Christer Burman)
Session Programme
Weekly Programme
Room
Mizar
Chair
Luca Esposito
Track
Minisymposium - Creep and fracture at elevated temperature
11.00 - 11.15
lifetime estimation of superheater header
(Oleh Yasniy, Yuriy Pyndus, Vitaly Brevus, Volodymyr Iasnii, Yuri Lapusta)
11.15 - 11.30
modelling of precipitate/austenitic matrix interfaces fracture during creep
(Liang HUANG, Maxime SAUZAY)
11.30 - 11.45
creep-fatigue crack growth testing in p91 steel
(Catrin Mair Davies, Norhaida ab Razak, Kamran Nikbin)
11.45 - 12.00
investigation of the crack front shape effect on the dcpd technique – application to the crack
propagation under hold-time conditions in da inconel 718
(Emmanuel Fessler)
12.00 - 12.15
type iv creep cracking of welded joints: numerical study of the grain size effect in haz
(Luca Esposito)
12.15 - 12.30
creep modelling of 316h stainless steel over a wide range of stress
(Luca Esposito, Nicola Bonora, Gianluca De Vita)
12.30 - 12.45
fatigue and fracture resistance of creep damaged 316h stainless steel
(Marco Rocchini, Catrin Mair Davies, David W Dean, Kamran M Nikbin)
12.45 - 13.00
a continuum damage model for creep fracture and fatigue analyses
(Petteri Kauppila, Reijo Kouhia, Juha Ojanpera, Timo Saksala, Timo Sorjonen)
Session Programme
Weekly Programme
Weekly Programme
Track
Room
Chairman
Pegaso 2
Flavia Libonati
Antares
Yuri Petrov
assessment
Pegaso 1
Vincenzo Crupi
Cassiopea 1
Reza HojjatiTalemi
Minisymposium - Thermomechanical fatigue testing and
life assessment models
Pegaso 3
Antonio M.
Meizoso
Idra
Hans J. Maier
in gigacycle regime
Cassiopea 2
Thierry Palin-Luc
Mizar
Liviu Marsavina
Room
Pegaso 2
Chair
Flavia Libonati
Track
14.30 - 14.45
effect of compressive residual stress generated by plastic preload fatigue initiation of 6061
aluminium alloy
(Mustapha BENACHOUR, Nadjia BENACHOUR, Mohamed BENGUEDIAB)
14.45 - 15.00
fluid pressurization and entrapment effects on the SIFs of cracks produced under lubricated
rolling-sliding contact fatigue
(Simone Ancellotti, Matteo Benedetti, Vigilio Fontanari, Michele Dallago)
15.00 - 15.15
biaxial experiments and numerical simulations on damage and fracture mechanisms in ductile
metals at different loading conditions
(Michael Bruenig, Steffen Gerke, Marco Schmidt)
15.15 - 15.30
effects of inclusion size and orientation on rolling contact fatigue crack initiation observed by
laminography using ultra-bright synchrotron radiation
(Yoshikazu Nakai, Daiki Shiozawa, Shoichi Kikuchi, Tomoya Obama, Hitoshi Saito, Taizo Makino,
Yutaka Neishi)
15.30 - 15.45
cortical bone as a biomimetic model for the design of new composites
(Flavia Libonati, Laura Vergani)
15.45 - 16.00
Session Programme
Weekly Programme
Room
Antares
Chair
Yuri Petrov
Track
14.30 - 14.45
shock-induced structural instability and dynamic strength of metals
(Yuriy Meshcheryakov, Nikita Silnikov)
14.45 - 15.00
dynamic fracture properties of ti6al4v
(Patricia Verleysen)
15.00 - 15.15
dynamic fracture in rubber toughened polymers: the influence of the fracture surface roughness
(Jean-Benoit Kopp, Christophe Fond, Jean Schmittbuhl, Olivier Noel)
15.15 - 15.30
shock-induced structural instability and dynamic strength of brittle solids
(Yurii Meshcheryakov, Аlexandre Divakov, Natali Zhigacheva, Grigorii Konovalov)
15.30 - 15.45
surface roughness investigation of ultrafine-grained aluminum alloy subjected to high speed
erosion
(N. Kazarinov, A. Evsyifeev, Y. Petrov, V. Lashkov, S. Atroshenko, R. Valiev)
15.45 - 16.00
an observation of brittle crack propagation in coarse grained 3% silicon steel
(Daiki Nakanishi, Tomoya Kawabata, Shuji Aihara)
Session Programme
Weekly Programme
Room
Pegaso 1
Chair
Vincenzo Crupi
Track
14.30 - 14.45
the heat energy dissipated in a control volume to correlate the fatigue strength of bluntly and
severely notched stainless steel specimens
(Giovanni Meneghetti, Mauro Ricotta, Bruno Atzori)
14.45 - 15.00
the study of dissipation properties and structure evolution in metals with different grain size
under hcf and vhcf loadings
(Oleg Plekhov, Oleg Naimark, Maria Narykova, Andrei Kadomtsev, Vladimir Betechtin)
15.00 - 15.15
fatigue limit estimation of stainless steels with new dissipated energy data analysis
(Daiki Shiozawa, Tuyoshi Inagawa, Takaya WASHIO, Takahide Sakagami)
15.15 - 15.30
thermographic image analysis of fatigue crack propagation in a high-alloyed steel under usage of
discrete fourier transformation and rigid body motion compensation
(Ralf Urbanek, Jürgen Bär)
15.30 - 15.45
determination of dissipated energy in fatigue crack propagation experiments with lock-in
thermography and heat flow measurements
(Jürgen Bär)
15.45 - 16.00
study of the plastic behaviour around the crack tip by means of thermal methods
(Francesco Ancona, Giuseppe Pompeo Demelio, Rosa De Finis, Umberto Galietti, Davide Palumbo)
Session Programme
Weekly Programme
Room
Cassiopea 1
Chair
Reza Hojjati-Talemi
Track
14.30 - 14.45
the effect of pre- and post-aging on the tensile mechanical properties of electron beam welded (almg-si) 6156 specimens
(Nikolaos D. Alexopoulos, Theano N. Examilioti, Vasilis Stergiou, Stavros K. Kourkoulis)
14.45 - 15.00
elastic-plastic behavior of welded joints during loading and unloading of pressure vessels
(Simon Sedmak, Mahdi Algool, Aleksandar Sedmak, Uros Tatic, Emina Dzindo)
15.00 - 15.15
torsional shear strength on dissimilar materials
(Gustavo Mata Osoro)
15.15 - 15.30
variable amplitude fatigue tests at high frequency hammer peened welded ultra high strength
steel s1100
(Jörn Berg, Natalie Stranghöner)
15.30 - 15.45
mechanical behavior and fracture mechanisms of titanium alloy welded joint made by plbw
(Benjamin Sarre, Sylvain Flouriot, Thomas Paris, Benoit Panicaud, Guillaume Geandier)
15.45 - 16.00
an investigation on effect of pre-bending process on low cycle fatigue behaviour of high strength
steel using infrared thermography
(Reza Hojjati-Talemi, Saosometh Chhith, Wim Dewaele)
Session Programme
Weekly Programme
Room
Pegaso 3
Chair
Antonio M. Meizoso
Track
Minisymposium - Thermomechanical fatigue testing and life assessment models
14.30 - 14.45
wear efficiency of oil-well casings exposed to rotating tooljoints
(Udaya B Sathuvalli, Shaikh Rahman, James Wooten, P V Suryanarayan)
14.45 - 15.00
thermo-mechanical relaxation of compressive residual stresses induced by shot peening
(R. Seddik, M. Seddik, A. Atig, R. Fathallah)
15.00 - 15.15
modeling the lifetime reduction due to the superposition of tmf and hcf loadings in cast iron alloys
(Bernard Fedelich, Hans-Joachim Kühn, Birgit Rehmer, Birgit Skrotzki)
15.15 - 15.30
the effect of varying loading directions and loading levels on crack growth at 2d- and 3d-mixedmode-loadings
(Alexander Eberlein, Hans Albert Richard)
15.30 - 15.45
boundary conditions effect on the dynamic vibration of flexible rotors
(Saliha BELAHRACHE, Brahim NECIB)
15.45 - 16.00
cyclic loading of different structures. finite element analysis. optimal control theory
(Vera Turkova)
Session Programme
Weekly Programme
Room
Idra
Chair
Hans J. Maier
Track
devices
14.30 - 14.45
mechanical characterization of a niti sma wire treated by nitrogen plasma based ion implantation
(pbii)
(Osmar de Sousa Santos, Maria Margareth da Silva, Luc Pichon, Jorge Otubo)
14.45 - 15.00
functional fatigue of high temperature shape memory alloys
(Hans J. Maier, Philipp Krooß, Thomas Niendorf)
15.00 - 15.15
assessing the influence of heat treatment on endodontic files
(Francisco Manuel BRAZ FERNANDES)
15.15 - 15.30
influence of the surface treatments on the tensile fatigue performance of superelastic niti wires
and springs
(Lukas Kaderavek)
15.30 - 15.45
controversies in usage of nitinol in clinical practice.
(Karel Volenec, Ivan Pohl)
15.45 - 16.00
effect of fatigue by bending rotative over mechanical properties of niti wires with memory shape
effect
(William Marcos Muniz Menezes)
Session Programme
Weekly Programme
Room
Cassiopea 2
Chair
Thierry Palin-Luc
Track
14.30 - 14.45
investigation of the damage mechanisms during very high cycle fatigue (vhcf) of a tempered
carbon steel
(Alexander Giertler, Ulrich Krupp)
14.45 - 15.00
gigacycle fatigue: non-local and scaling aspects of damage localization, crack initiation and
propagation
(Oleg Borisovich Naimark, Thierry Palin-Luc)
15.00 - 15.15
a review on crack initiation modes of metallic materials in very high cycle fatigue
(Tatsuo Sakai)
15.15 - 15.30
effects of microstructure and surface finish on the fatigue strength of high-strength steels
(Junbiao Lai, Hanzheng Huang, Wijbe Buising)
15.30 - 15.45
damage evolution in metals under the gigacycle fatigue loading due to the contact with surfaceactive liquid
(Mikhail Bannikov, Oleg Naimark)
15.45 - 16.00
influence of corrosive nacl solution on life times of 7075 aluminum alloy under combined fatigue
loading in the vhcf regime
(Martin Meischel, Stefanie E. Tschegg, Attilio Arcari, Nagaraja Iyyer, Nam Phan)
Session Programme
Weekly Programme
Room
Mizar
Chair
Liviu Marsavina
Track
14.30 - 14.45
material characteristics at 3d-mixed-mode-loadings
(Hans Albert Richard, Alexander Eberlein)
14.45 - 15.00
strain energy density-based evaluation of the nsifs under mixed mode i+ii loading
(Luca Pittarello, Alberto Campagnolo, Filippo Berto)
15.00 - 15.15
fracture assessment of cracked giant magnetostrictive materials under magnetic fields
(Marco Colussi, Filippo Berto, Kotaro Mori, Fumio Narita)
15.15 - 15.30
simulation of quasicrystalline fracture behaviour with fem
(Zhibin Wang, Andreas Ricoeur)
15.30 - 15.45
numerical and experimental investigation of crack growth at imperfect material interfaces
(Paul Judt, Andreas Ricoeur)
15.45 - 16.00
mechanical stability under sliding contact of thin multilayer with weak adhesion
(Aymar Quarré de Boiry, Jérémie Teisseire, Davy Dalmas, Jean-Yvon Faou)
Session Programme
Weekly Programme
Weekly Programme
Track
Room
Chairman
Pegaso 2
Gianni Nicoletto
Physical Aspects of Brittle and Ductile Fracture
Antares
Viggo Tvergaard
Ductile Fracture
Pegaso 1
Claudio Ruggieri
Cassiopea 1
Andrea
Carpinteri
Pegaso 3
Igor Yu. Smolin
Concrete & Rocks
Idra
Giuseppe Ferro
in gigacycle regime
Cassiopea 2
Martina
Zimmermann
temperature
Mizar
Catrin M Davies
Room
Pegaso 2
Chair
Gianni Nicoletto
Track
16.30 -16.45
determination of crack initiation and crack growth stress-life curves by fracture mechanics
experiments and statistical analysis
(Stefan Kolitsch, Hans-Peter Gänser, Reinhard Pippan)
16.45 - 17.00
fatigue crack growth behaviour of additively processed en aw 7075 aluminium alloy
(Wadim Reschetnik, Jan-Peter Brüggemann, Mehmet Esat Aydinöz, Hans Albert Richard, Gunter
Kullmer, Olexandr Grydin, Kay-Peter Hoyer)
17.00 - 17.15
a comparison of the fatigue crack growth behavior of pure ultrafine-grained metals
(Thomas Leitner, Anton Hohenwarter, Reinhard Pippan)
17.15 - 17.30
fatigue test of an integrally stiffened panel: prediction and crack growth monitoring using
acoustic emission
(Lenka Michalcova, Roman Růžek)
17.30 - 17.45
influence of interfaces on the fatigue crack growth in ultrafine-grained laminates produced by
accumulative roll bonding
(Frank Kümmel)
17.45 - 18.00
influence of the casting process in high temperature fatigue of a319 aluminium alloy investigated
by in-situ x- ray tomography and digital volume correlation
(NORA DAHDAH, Nathalie Limodin, Ahmed El Bartali, Jean-François Witz, Rian Seguir, Eric
Charkaluk, Jean-Yves Buffière)
18.00 - 18.15
numerical evaluation of fatigue crack growth in friction stir welded t joint made of al 2024 t351
alloy
(Aleksandar Sedmak, Aleksandar Grbovic, Abubakr Kredegh)
18.15 - 18.30
fatigue crack growth under variable amplitude loading through
xfem
(Haydar Dirik, Tuncay Yalçinkaya)
18.30 - 18.45
fatigue crack propagation and threshold of inconel 718 produced by selective laser melting
(Radomila Konecna, Ludvik Kunz, Gianni Nicoletto)
18.45 - 19.00
prediction model for fatigue life considering microstructures of steel
(Kohya UEDA, Kazuki SHIBANUMA, Masao KINEFUCHI, Yoshiki NEMOTO, Katsuyuki SUZUKI,
Manabu ENOKI)
Session Programme
Weekly Programme
Room
Antares
Chair
Viggo Tvergaard
Track
Physical Aspects of Brittle and Ductile Fracture
16.30 -16.45
study of localization in a void-sheet under stress states near pure shear
(Viggo Tvergaard)
16.45 - 17.00
observation of the microstructural precursor phenomenon of the brittle crack initiation in bainitic
steel manufactured by tmcp
(Shohei Asako, Tomoya Kawabata, Shintaro Kimura, Kiyoshi Kagehira)
17.00 - 17.15
transition from smeared to localized cracking in macro-defect-free quasibrittle structures
(Jaime Planas, José María Sancho, Beatriz Sanz)
17.15 - 17.30
in situ observation of strained bands and ductile damage in thin al alloy sheets
(Ante Buljac)
17.30 - 17.45
numerical investigation of dynamic strain ageing and slant ductile fracture in a notched specimen
and comparison with synchrotron tomography 3d-dvc
(Sicong Ren, Thilo F. Mogeneyer, Gilles Rousselier, Matthieu Mazière, Samuel Forest)
17.45 - 18.00
effect of stress triaxiality and deviatoricity on yield and failure of ductile metals
(Giuseppe Mirone, Raffaele Barbagallo, Domenico Corallo)
18.00 - 18.15
on constitutive assumptions in phase field approaches to brittle fracture
(Michael Strobl, Thomas Seelig)
18.15 - 18.30
failure of materials on the postcritical deformation stage at different types of the stress-strain
state
(Mikhail Pavlovich Tretyakov, Valerii Ervinovich Wildemann)
18.30 - 18.45
evaluation and identifying the ductile fracture area of x70 steel from dwtt broken specimens.
(Pavel Skalny)
18.45 - 19.00
Session Programme
Weekly Programme
Room
Pegaso 1
Chair
Claudio Ruggieri
Track
16.30 -16.45
experimental determination of critical void volume fraction ff for the gurson tvergaard
needleman (gtn) model
(Wiktor Wcislik)
16.45 - 17.00
microstructural heterogeneity effects on damage resistance of 6xxx series aluminium alloys
(Florent Hannard, Thomas Pardoen, Aude Simar, Eric Maire)
17.00 - 17.15
temperature and loading-rate dependence on a local criterion for cleavage fracture in the
transition region of the tempered martensitic steel eurofer97.
(Serafin Knitel, Philippe Spätig, Hans-Peter Seifert)
17.15 - 17.30
introduction to the effect of the screenig phenomenon of slip bands within grain microstructure
(Mohamed Ould Moussa, Maxime SAUZAY)
17.30 - 17.45
analysis of shear cutting of dual phase steel by application of an advanced damage model
(Florian Gutknecht, Till Clausmeyer, A. Erman Tekkaya)
17.45 - 18.00
effects of crack configuration and residual stress on fracture driving force for welded joint with
embedded flaw
(Yusuke Seko, Yasuhito Imai, Masaki Mitsuya, Noritake Oguchi, Fumiyoshi Minami)
18.00 - 18.15
master curve in upper region of ductile brittle transition: a modification based on local damage
approach
(Abhishek Tiwari, Ram Niwas Singh, Jayanta Kumar Chakravartty, Per Ståhle)
18.15 - 18.30
analysis of the distribution of fracture toughness values measured with 1t c(t) specimens at
loading rates higher than dk/dt=10^5 mpa√m s^-1
(Uwe Mayer)
18.30 - 18.45
a modified weibull stress approach to predict specimen geometry effects in pressure vessel steels
(Claudio Ruggieri, Robert H Dodds)
18.45 - 19.00
ductile fracture of a grade x65 pipeline: base metal, weld metal and full scale test
(Jacques Besson, Clément Soret, Yazid Madi, Vicent Gaffard)
Session Programme
Weekly Programme
Room
Cassiopea 1
Chair
Andrea Carpinteri
Track
16.30 -16.45
fractals and the lead crack airframe lifing framework
(Molent Loris, Andrea Spagnoli, Andrea Carpinteri, Rhys Jones)
16.45 - 17.00
fatigue crack nucleation and propagation in aluminum alloy plates with cold expanded holes
(Petro Volodymyrovych Yasniy, Sergii Volodymyrovych Glado, Volodymyr Petrovych Iasnii)
17.00 - 17.15
low cycle fatigue behavior of aa7075 with surface gradient structure produced by ultrasonic shot
peening
(Vaibhav Pandey, K. Chattopadhyay, N. C. Santhi Srinivas, Vakil Singh)
17.15 - 17.30
mechanical behaviour of magnesium alloy az31b in-plane biaxial fatigue
(Luis Reis, Manuel Freitas, Vitor Anes)
17.30 - 17.45
development of fatigue loading spectra from flight test data
(Dilawar Ali, Amer Shahzad, Tanveer Ahmed Khan)
17.45 - 18.00
optimisation of fatigue resistance of nitinol stents through shot-peening
(Konstantinos Dimakos)
18.00 - 18.15
indicators of hsla steel behavior under low cycle fatigue loading
(Vujadin D. Aleksić, Ljubica P Milović, Bojana V Aleksić, Abubaker M Hemer)
18.15 - 18.30
the effect of interacting small defects on the fatigue limit of a medium carbon steel
(Mari Åman, Saburo Okazaki, Hisao Matsunaga, Gary B. Marquis, Heikki Remes)
18.30 - 18.45
the impact of heat treatment and shot peening on the fatigue strength of 51crv4 steel
(Andrzej Kubit, Magdalena Bucior, Władysław Zielecki, Feliks Stachowicz)
18.45 - 19.00
low cycle fatigue behavior of gradient structured aa7075 by ultrasonic shot peening
(Vaibhav Pandey)
Session Programme
Weekly Programme
Room
Pegaso 3
Chair
Igor Yu. Smolin
Track
16.30 -16.45
probabilistic approach for analysis of strength of ceramics with different porous structure based
on movable cellular automaton modeling
(Alexey Yu. Smolin, Igor Yu. Smolin, Irina Yu. Smolina)
16.45 - 17.00
simulation the crack front in a thin sheet specimen obtained from steel s355
(Haoyun Tu, Siegfried Schmauder, Ulrich Weber, Yin Cheng, Thilo Frank Morgeneyer)
17.00 - 17.15
seismic resistance of timber structure – a state of art design
(Ershad Darvishi, Abdoullah Namdar, Xiong Feng, Qi Ge)
17.15 - 17.30
ratcheting strain accumulation due to asymmetric cyclic loading of zircaloy-2 at room temperature
(R. S. Rajpurohit, N.C. Santhi Srinivas, Vakil Singh)
17.30 - 17.45
structural and physical criteria of ultimate state of material before fracture
(Ludmila Rafailovna Botvina, Viktor Petrovich Levin, Tatyana Borisovna Petersen, Marat
Ravilevich Tyutin, Yulia Andreevna Demina, Alexey Pavlovich Soldatenkov, Alexander Ivanovich
Demin)
17.45 - 18.00
evaluation of crack width in rc ties through a numerical “range” model
(Patrizia Bernardi, Daniele Ferretti, Elena Michelini, Alice Sirico)
18.00 - 18.15
18.15 - 18.30
18.30 - 18.45
18.45 - 19.00
Session Programme
Weekly Programme
Room
Idra
Chair
Giuseppe Ferro
Track
Concrete & Rocks
16.30 -16.45
pull-out of threaded reinforcing bars from marble blocks
(I. Dakanali, I. Stavrakas, D. Triantis, S. K. Kourkoulis)
16.45 - 17.00
a nonlinear procedure for the analysis of rc beams
(Patrizia Bernardi, Roberto Cerioni, Elena Michelini)
17.00 - 17.15
mortar made of recycled sand from c&d
(Luciana Restuccia, Giuseppe Andrea Ferro, Consuelo Spoto, Jean Marc Christian Tulliani)
17.15 - 17.30
a novel consolidation-based representative volume element for granular materials and its
application for the characterization of the mechanical response of sand during impact loading
(Francesco De Cola, Antonio Pellegrino, Ettore Barbieri, Dayakar Penumadu, Nik Petrinic)
17.30 - 17.45
stress-strain behaviour of asphalt concrete in compression
(Lee Leon, Raymond Charles, Nicola Simpson)
17.45 - 18.00
fracture mechanics in ancient egypt
(Bassem Mahsoub El-Sehily)
18.00 - 18.15
on the fatigue behavior of bamboo pulp reinforced cementitious composites
(EDUARDO CAMPELLO, FATHI AREF DARWISH, MARCOS VENICIUS PEREIRA, KHOSROW GHAVAMI)
18.15 - 18.30
18.30 - 18.45
18.45 - 19.00
Session Programme
Weekly Programme
Room
Cassiopea 2
Chair
Martina Zimmermann
Track
16.30 -16.45
effects of stress ratio and primary α grain size on high cycle and very-high-cycle fatigue behavior
of ti-6al-4v
(Chengqi Sun)
16.45 - 17.00
the influence of the alpha grain size on internal fatigue crack initiation in drawn ti-6al-4v wires
(Joris Everaerts, Bert Verlinden, Martine Wevers)
17.00 - 17.15
fatigue crack initiation and growth on an extruded titanium alloy in gigacycle regime : comparison
between tension and torsion loadings
(Alexander NIKITIN, Thierry PALIN-LUC, Andrey SHANYAVSKIY)
17.15 - 17.30
ultrasonic fatigue testing of thin mp35n alloy wire
(Michael Fitzka, Dhiraj Catoor, Markus Reiterer, Herwig Mayer)
17.30 - 17.45
gigacycle fatigue behavior of a cast aluminum alloy under biaxial bending: experiments with a
new piezoelectric fatigue testing device
(Charles Brugger, Thierry Palin-Luc, Pierre Osmond, Michel Blanc)
17.45 - 18.00
very high cycle fatigue of wrought magnesium alloy az61
(Ulrike Karr, Anton Stich, Herwig Mayer)
18.00 - 18.15
multiscale study of morphology of the fracture surface aluminum-magnesium alloy with
consecutive dynamic and gigacycle loading
(Vladimir Oborin, Oleg Naimark, Mikhail Sokovikov, Dmitry Bilalov)
18.15 - 18.30
theoretical approach for developing the thermographic method in ultrasonic fatigue
(Vincenzo Crupi, Eugenio Guglielmino, Oleg Plekhov, Giacomo Risitano)
18.30 - 18.45
18.45 - 19.00
Session Programme
Weekly Programme
Room
Mizar
Chair
Catrin M Davies
Track
16.30 -16.45
x-ray diffraction study on inelastic deformation behavior of ni-base single crystal superalloy
(Yasuhiro Mukai)
16.45 - 17.00
interpretation of creep crack growth data for ½crmov steel weldments
(Muneeb Ejaz, Catrin M Davies, David W Dean)
17.00 - 17.15
experimental and simulated displacement in cracked specimen of p91 steel under creep
conditions
(Federico Bassi, Ashok Saxena, Antonietta Lo Conte, Stefano Beretta)
17.15 - 17.30
local damage approach to stress relaxation cracking
(Harry Pommier, Esteban B Busso, Thilo F. Morgeneyer, Sophie Doubiez-Le Goff, Andre Pineau)
17.30 - 17.45
brittle rupture of austenitic stainless steels due to creep cavitation
(Junjing He, Rolf Sandström)
17.45 - 18.00
creep, low cycle fatigue and creep-fatigue properties of a modified hr3c
(Junjing He, Rolf Sandström, Stojan Vujic)
18.00 - 18.15
an evaluation of creep rupture strength of ferritic/austenitic dissimilar weld interfaces using
cohesive zone modelling
(Jianan Hu, Takuya Fukahori, Toshihide Igari, Yasuharu Chuman, Alan CF Cocks)
18.15 - 18.30
near-threshold fatigue propagation of physically short and long cracks in titanium alloy
(Chretien Gaëlle, Sarrazin-Baudoux Christine, Leost Laurie, Hervier Zeline)
18.30 - 18.45
influence of nominal composition variation on phase evolution and creep life of type 316h
austenitic stainless steel components
(Ana I. Martinez-Ubeda, Ian Griffiths, Mudith S. A. Karunaratne, Peter E. J. Flewitt, Charles
Younes, Tom Scott)
18.45 - 19.00
asymptotic stress field in the vicinity of the mixed-mode crack in damaged materials under creep
conditions
(Larisa Valentinovna Stepanova, Ekaterina Michailovna Yakovleva)
Session Programme
Weekly Programme
Rooms Plan
Friday 24
Plenary
Invited Lectures
gradient effect and size effect in high cycle multiaxial fatigue of metals: a state of the art.
(Thierry PALIN-LUC, Franck MOREL)
Rooms Plan
Weekly Programme
Friday 24 - Session 5.1
Track
Room
Chairman
Pegaso 2
Andrea Pavan
Antares
Carmine Maletta
Minisymposium - Structural integrity assessment of offshore structures
Pegaso 1
Antonio Carlucci
Cassiopea 1
Luca Susmel
Pegaso 3
Christos F
Markides
rate
Idra
Nicola Bonora
temperature
Cassiopea 2
Stefano Beretta
Mizar
Majid Ayatollahi
Room
Pegaso 2
Chair
Andrea Pavan
Track
Composites
9.00 - 9.15
experimental and numerical analysis of micro-structure damage in silica filled epoxy
(Robert Platek, Lukasz Malinowski, Robert Sekula, Piotr Zwolinski)
9.15 - 9.30
effect of test temperature on fatigue crack propagation in injection molded plates of shortcarbon -fiber reinforced plastics
(Keisuke Tanaka, Kazuya Oharada, Daiki Yamada, Kenichi Shimizu)
9.30 - 9.45
fracture characterization of continuous fiber-reinforced polymer matrix composite laminates by
nuclear magnetic resonance
(Jose Tarpani, C.L. Alves, J.S. Oliveira, E.L.G. Vidoto, A. Tannus)
9.45 - 10.00
a method to improve the fracture toughness using 3d printing by extrusion deposition
(Julien Gardan, Ali Makke, Naman Recho)
10.00 -10.15
tensile strength of poly-p- phenylene benzobisoxazole (pbo) fiber with kinking damage
(Noriyo Horikawa, Yuki Kawano, Toshiro Miyajima, Yukihiro Nomura, Tooru Kitagawa, Akira
Ueno, Akiyoshi Sakaida, Takao Mori)
10.15 - 10.30
analytical modelling of stress conditions and fracture mechanics of composite flywheels
(Jennifer Caren Lenz, Jennifer Lenz, Bamber R. Blackman, J Gordon G Williams)
10.30 - 10.45
influence of residual stress on crack growth in polyethylene
(Jan Poduska, Pavel Hutar, Florian Arbeiter, Andreas Frank, Jaroslav Kucera, Lubos Nahlik, Gerald
Pinter)
10.45 - 11.00
(discussion)
Session Programme
Weekly Programme
Room
Antares
Chair
Carmine Maletta
Track
devices
microstructural modelling of plastic deformation and defects accumulation in femn-based shape
memory alloys
(INVITED - Margarita E. Evard, Aleksandr A. Volkov, Fedor S. Belyaev, Anna D. Ignatova, Natalia A.
Volkova)
Weekly Programme
9.00 - 9.15
9.15 - 9.30
functional fatigue of superelastic niti wire under hp-sme for high force sma actuators
(Ausonio Tuissi, Mauro Coduri, Mohammadreza Farjadfar, Riccardo Casati, Maurizio Vedani, Carlo
Alberto Biffi)
9.30 - 9.45
formation of composite layers tinizr-cbn-co, working in conditions of cyclic loading and reverse
friction
(P.O. Rusinov, Zh. M. Blednova, E.U. Balaev, D.V. Dmitrenko)
9.45 - 10.00
optimization of the fatigue resistance of nitinol stents through shot peening
(Konstantinos Dimakos, Andrea Mariotto, Fausto Giacosa)
10.00 -10.15
computational model for delamination growth at sma-gfrp interface of hybrid composite
(A. Lo Conte, C.A. Biffi, A. Tuissi, A. Ali)
10.15 - 10.30
failure analysis of screw propellers and increase of fail safety by surface modification with
multicomponent materials with shape memory effect
(Zh. M. Blednova, P.O. Rusinov, D. V. Dmitrenko)
10.30 - 10.45
formation of composite layers, working in conditions of cyclic loading and reverse friction
(Petr Olegovich Rusinov, Zhesfina Michailovna Blednova, Etibar Balaev)
10.45 - 11.00
influence of cryogenic treatment on the fatigue behavior of a niti shape memory alloy
(Régis Santana Rocha, Tomé Seichi da Nóbrega Guenka, Edson Paulo da Silva, Tadeu castro da
Silva)
Session Programme
Room
Pegaso 1
Chair
Antonio Carlucci
Track
Minisymposium - Structural integrity assessment of off-shore structures
9.00 - 9.15
misalignment effect on stress concentration of butt welded joints in plated strctures
(song wei, Liu Xuesong)
9.15 - 9.30
assessment of cleavage fracture in specimens with a curved crack front for high-strength steels in
offshore applications
(Xudong Qian, Shuang Chen, Aziz Ahmed)
9.30 - 9.45
experimental and numerical investigation of fracture in fillet welds by cross joint specimens
(Benjamin Werner, Horst Heyer, Manuela Sander)
9.45 - 10.00
characterization of mechanical behavior of weld for offshore line pipe steel
(Yazid Madi, Laura Zeighampour, Antonio Carlucci)
10.00 -10.15
a fracture assessment procedure for dissimilar girth welds in offshore pipelines under bending
(Rodolfo Figueira Souza, Claudio Ruggieri, Zhiliang Zhang)
10.15 - 10.30
ctoa measurement from lld curves withe dwtt specimen
(Shengwen Tu, Jianyin He, Zhiliang Zhang)
10.30 - 10.45
experimental validation of defects acceptance criteria of a pipeline girth welds for oil and gas
application with eddy-current crack monitoring system.
(Enrico Gasparin, Antonio Carlucci)
10.45 - 11.00
predicting the effect of residual stresses on ductile to brittle transition of steel by using 3d cellular
automata finite element method
(Yang Li, Zhiliang Zhang, Anton Shterenlikht, Xiaobo Ren, Bård Nyhus)
Session Programme
Weekly Programme
Room
Cassiopea 1
Chair
Luca Susmel
Track
9.00 - 9.15
influences of microstructural heterogeneities and loading conditions on hcf damage mechanisms
of cast aluminum alloys
(Viet-Duc LE, Franck Morel, Nicolas Saintier, Daniel Bellett, Pierre Osmond)
9.15 - 9.30
competition between surface defects and residual stresses on fatigue behaviour of shot peened
forged components
(Benjamin Gerin ,Etienne Pessard, Franck Morel, Catherine Verdu)
9.30 - 9.45
estimation of the crack initiation plane under multiaxial constant and variable amplitude loading
(Yingyu Wang, Luca Susmel)
9.45 - 10.00
a comparison of the fatigue and fracture behavior of high strength ultrafine grained medium
carbon steel sae 1045 with high strength bearing steel sae 52100
(Christoph Ruffing, Yulia Ivanisenko, Eberhard Kerscher)
10.00 -10.15
surface and through thickness crack growth in cruciform specimens subjected to biaxial loading
(Alexander Zakharov, Valery Shlyannikov, Anastasiya Lyagova)
10.15 - 10.30
microstructure, fatigue properties and damage mechanisms of al-si-cast alloys
(Daniel Schwimmer)
10.30 - 10.45
study of the contribution of different effects induced by the punching process on the high cycle
fatigue strength of the m330-35a electrical steel
(Helmi Dehmani, Charles Brugger, Thierry Palin-Luc, Charles Mareau, Samuel Koechlin)
10.45 - 11.00
cyclic deformation behaviour of friction drilled internal threads in alsi10mg and az31 profiles
(Philipp Wittke, Frank Walther, Stefan Hannich, Dirk Biermann)
Session Programme
Weekly Programme
Room
Pegaso 3
Chair
Christos F Markides
Track
9.00 - 9.15
fatigue strength of steel rollers with failure occurring at the weld root based on the local strain
energy values: modelling and fatigue assessment
(Filippo Berto, Alberto Campagnolo, Francesco Chebat, Marco Cincera)
9.15 - 9.30
fracture mechanics assessment of casting defects in an aluminum alloy containing iron
(Marcel Wicke, Martin Luetje, Inigo Bacaicoa, Angelika Brueckner-Foit)
9.30 - 9.45
mathematical and numerical correction of the dic displacements for determination of stress field
along crack front
(Alexander Chernyatin, Yury Matvienko, Pablo Lopez-Crespo)
9.45 - 10.00
anisotropic discs loaded by parabolically distributed pressure
(Christos F Markides, Stavros K Kourkoulis)
10.00 -10.15
shakedown in an elastic-plastic solid with a frictional crack
(Andrea Spagnoli, Michele Terzano, Anders Klarbring, James R. Barber)
10.15 - 10.30
3d crack tracking algorithms based on weight function approximation schemes
(Francesca Fantoni, Alberto Salvadori)
10.30 - 10.45
10.45 - 11.00
Session Programme
Weekly Programme
Room
Idra
Chair
Nicola Bonora
Track
9.00 - 9.15
validation of a low blow specimen technique for r-curve determination using a drop tower
(Wolfram Baer, Peter Wossidlo)
9.15 - 9.30
base scale level of the spall fracture of metals: numerical simulations and microstructural
investigations
(Elijah N Borodin, Alexander E Mayer, Svetlana A Atroshenko)
9.30 - 9.45
interaction of strain rate and necking on the stress-strain response of uniaxial tension tests by
hopkinson bar
(Giuseppe Mirone, Domenico Corallo, Raffaele Barbagallo)
9.45 - 10.00
tensile fracture of solid and molten metals at high strain rates: atomistic simulations and
continuum model
(Alexander E Mayer, Polina N Mayer, Vasiliy S Krasnikov, Victor V Pogorelko)
10.00 -10.15
development and integration of glass fibre sensors for monitoring diffusion of chemicals in
polymer composites in harsh environments
(Milena Salvo, Ben Milsom, Cristian Marro Bellot, Marco Sangermano, Daniel Milanese, Massimo
Olivero, Stefanos Giannis)
10.15 - 10.30
fracture resistance testing of nickel-chromium girth welds for clad lined pipes: experiment and
test procedure
(Claudio Ruggieri)
10.30 - 10.45
constitutive response of austempered ductile iron at high strain rate
(Andrew Ruggiero, Gianluca Iannitti, Nicola Bonora, Enrico Veneri, Federico Vettore, Stefano
Masaggia)
10.45 - 11.00
Session Programme
Weekly Programme
Room
Cassiopea 2
Chair
Stefano Beretta
Track
9.00 - 9.15
creep-fatigue crack growth testing and analysis in pre-strained 316h stainless steel
(Ali Mehmanparast, Catrin M Davies, Kamran Nikbin)
9.15 - 9.30
creep crack growth behavior of alloy 617 for use in vhtr system
(Woo-Gon Kim, Jae-Young Park, I Made Wicaksana Ekaputra, Seon-Jin Kim, Eung-Seon Kim)
9.30 - 9.45
investigation of the deformation and fracture of a nuclear-grade graphite using in situ hightemperature computed x-ray micro-tomography
(Dong Liu, Bernd Gludovatz, Claire Acevedo, Peter Flewitt, Harold Barnard, Robert Ritchie)
9.45 - 10.00
investigation of fatigue crack growth in a power plant steel under elevated temperatures
(Patrick Mutschler, Manuela Sander)
10.00 -10.15
v-notched components under non-localized creeping condition: numerical evaluation of stresses
and strains
(Pasquale Gallo, Filippo Berto, Grzegorz Glinka)
10.15 - 10.30
influence of nominal composition variation on phase evolution and creep life of type 316h
austenitic stainless steel components
(ANA ISABEL MARTINEZ-UBEDA, IAN GRIFFITHS, Peter Flewitt, CHARLES YOUNES, TOM SCOTT)
10.30 - 10.45
characterization of elastic-plastic-creep crack-tip stress fields under load and displacement control
(Dongjun Kim, Han-Sang Lee, Jin-Ho Je, Yun-Jae Kim, Robert A. Ainsworth, Peter J Budden)
10.45 - 11.00
Session Programme
Weekly Programme
Room
Mizar
Chair
Majid Ayatollahi
Track
9.00 - 9.15
role of vortex-like motion in fracture of coating-substrate system under contact loading
(Alexey Yu. Smolin, Galina M. Eremina, Evgeny V. Shilko, Sergey G. Psakhie)
9.15 - 9.30
complete williams asymptotic expansion near the crack tips of collinear cracks of equal lengths in
an infinite plane medium
(Larisa Valentinovna Stepanova, Pavel Sergeevich Roslyakov)
9.30 - 9.45
a photoelastic study for multiparametric analysis of the near crack tip stress field under mixed
mode loading
(Larisa Valentinovna Stepanova, Pavel Sergeevich Roslyakov, Pavel Nickolaevich Lomakov, Tatjana
Evgenjevna Gerasimova)
9.45 - 10.00
multiaxial brittle fracture of rounded v-notches in isostatic graphite
(Filippo Berto, Alberto Campagnolo, Majid Ayatollahi)
10.00 -10.15
effect of hot-dip galvanization on the fatigue strength of notched and welded structural steel
(Filippo Berto, Francesco Mutignani)
10.15 - 10.30
mixed-mode i/ii fracture behavior of asymmetric composite joints
(Moslem Shahverdi, Anastasios P. Vassilopoulos, Thomas Keller)
10.30 - 10.45
10.45 - 11.00
Session Programme
Weekly Programme

Room - ECF 21

Transcription

Similar documents

IRONMAN SWITZERLAND Triathlon 2005, powered by

JADAVPUR UNIVERSITY [www.jaduniv.edu.in]