Wainbee Pneumatic Quick Picks

Transcription

Coast-to-Coast Locations
1-888-WAINBEE
w a i n b e e . c o m
HEAD OFFICE: TORONTO/MISSISSAUGA BRANCH
5789 Coopers Avenue, Mississauga, Ontario
Phone: 1-888-WAINBEE (924-6233) / (905) 568-1700
Hose & Fittings direct line: (905) 568-3489
E-mail corporate: [email protected]
Canada L4Z 3S6
After hours phone: (416) 334-6364
Fax: (905) 568-0083
E-mail branch: [email protected]
MONTRÉAL/POINTE CLAIRE
VANCOUVER/RICHMOND
CHICOUTIMI/SAGUENAY
EDMONTON
215 boul. Brunswick,
Pointe Claire, Québec H9R 4R7
Toll-free: 1-888-WAINBEE (924-6233)
Phone: (514) 697-8810
Fax: (514) 697-3070
E-mail: [email protected]
CALGARY
938 - 55th Avenue NE,
Calgary, Alberta T2E 6Y4
Phone: (403) 236-1133 Fax: (403) 279-9367
135, rue Des Routiers,
Chicoutimi, Québec G7H 5B1
Phone: (418) 698-4884 Fax: (418) 698-4909
HALIFAX/DARTMOUTH
KITCHENER
10 Thornhill Drive #9, Dartmouth,
Nova Scotia B3B 1S1
Phone: (902) 468-1787 Fax: (902) 468-3225
65 Trillium Park Place #14, Kitchener
Ontario N2E 1X1
Phone: (519) 748-5391 Fax: (519) 748-4893
SEPT-ÎLES (Wainbee SHCN Inc.)
PRINCE GEORGE
453 rue Noël, Sept-îles,
Québec G4R 1M1
Phone: (418) 962-4949 Fax: (418) 968-5749
Pneumatic quick picks
5500 Continental Way
Prince George, BC V2N 5S5
Phone: (250) 564-3230 Fax: (250) 562-7987
2231 Vauxhall Place,
Richmond, British Columbia V6V 1Z5
Phone: (604) 278-4288 Fax: (604) 278-3490
After Hours Phone: (604) 278-4290
10336-59th Avenue, Edmonton,
Alberta T6H 1E6
Phone: (780) 434-9528 Fax: (780) 437-7931
SASKATOON
3111 Millar Ave, Unit 20, Saskatoon,
Saskatchewan S7J 6N3
Phone: (306) 652-1433 Fax: (306) 652-1436
FRL’s
Actuators
QUÉBEC
950 avenue St-Jean-Baptiste, Québec
Québec G2E 5E9
Phone: (418) 683-1956 Fax: (418) 688-9885
Clamps
Hoses
WINNIPEG
1393 Border Street #4, Winnipeg,
Manitoba R3H 0N1
Phone: (204) 632-4558 Fax: (204) 694-5494
Valves
Filtramax Inc. , a Wainbee affiliate, provides
cost-effective, single source liquid and air
filtration solutions by combining the strength of
worls-class suppliers with its own technical and
supply chain experience.
Fittings
PQP-EAST-2011-5H
Gauges
1-888- WAI N B EE
wainbe e.c om
To our valued Customers:
Over the years, Wainbee has evaluated, selected and inventoried the most reliable products
from world-class manufacturers to become one of North America’s most complete source for
automation solutions based on pneumatic, hydraulic, electrical and electronic technologies.
This edition of Quick Picks features selected pneumatic items designated with a
which we
stock and can ship to you the same day or next day delivery.
These items are just a small selection from the tens of thousands of items that we can supply.
The Pneumatic Quick Picks is one of the services provided by Wainbee to get you:
• The rights products,
• at the lowest cost, and
• with a minimal amount of effort on your part.
If you are looking for a pneumatic product that is not in this book or would like to learn more
about other products groups, our systems capabilities or our procurement cost reduction
programs, please contact our knowledgeable staff at Wainbee branch nearest you by calling
1-888-WAINBEE.
Our multi-techonology expertise brings
SMART SOLUTIONS to many industries
Wainbee
Engineered Systems
• Hydraulic power units
• Aircraft testing systems
• Pressure testing systems
Why limit your horizon by dealing with
a company restricted to only one or two
automation technologies?
When you partner with Wainbee,
you benefit from our coast-to-coast
expertise in:
We hope that this Pneumatic Quick Picks catalogue serves you well.
• Hydraulics
• Pneumatics
• Electromechanical motion
• Electronic controls
• Assembly tools
• Machining solutions
• Filtration
Sincerely,
The result?
To get the latest news on automation and motion control products and services, visit our
website at www.wainbee.com.
THE WAINBEE TEAM
You get “smart solutions” that integrate
these technologies to provide you with
the best automation and motion control
solutions for your requirements and will
improve your productivity (and profits)
while reducing training and maintenance
costs.
What can we help you do smarter?
Table of Contents
Air Valves &
Accessories
Parker/Schrader Bellows
B Series Inline & Manifold Air Valves & Accessories........................................................ 1 - 3
Mechanical Valves: 3-Way Spool ..................................................................................... 4 - 5
Mechanical Valves: 4-Way Spool ..................................................................................... 6 - 7
Pneumatic Lever Valves ........................................................................................................ 8
Global FRL - Filters................................................................................................................ 9
Global FRL - Regulators .......................................................................................................10
Global FRL - Lubricators.......................................................................................................11
Global FRL - Filter / Regulator "Piggybacks".........................................................................12
Global FRL - Popular Combinations ............................................................................. 13 - 15
Global FRL - Accessories ............................................................................................. 16 - 19
Air Line Accessories..................................................................................................... 20 - 23
Cylinders
Valves
Fittings
Accessories
Clippard
Stainless Steel Cylinders and Mounting Accessories ................................................. 23 - 24
Miniature 2-Way Brass Control Valves ................................................................................ 26
Miniature 3-Way Brass Control Valves ......................................................................... 26 - 28
Miniature 4-Way Brass Control Valves ................................................................................ 29
More Miniature Control Valves..................................................................................... 30 - 31
Miniature Valve Actuators ........................................................................................... 31 - 32
Heavy Duty Limit Valves & Accessories .............................................................................. 33
Miniature Brass Fittings................................................................................................. 33 - 34
Miniature Adaptor Fittings and Hose............................................................................. 34 - 35
Miniature Mufflers, Manifolds .............................................................................................. 35
Fittings, Couplings
How to Order LF3000 .......................................................................................................... 36
Parker, Legris
Fittings, Valves, Tubing & Accessories................................................................................ 36
Tube to tube, Bulkhead Connector, Threaded Fittings ........................................................ 37
Threaded Fittings .................................................................................................................38
Brass Body Push-In Tube Fittings................................................................................. 39 - 40
Brass Fittings ............................................................................................................... 41 - 42
Pneumatic Quick Couplings - Industrial Interchange .......................................................... 43
Couplings &
Clamps
2-Ear Clamps & Hose Clamps ............................................................................................ 44
Oetiker
Hose & Tubing
Oil, Ball Valves
Parker, Foster, Wainbee
Blow Guns............................................................................................................................ 45
Push-Lok Hose & Push-Lok 82 Series, Male / Female NPTF Pipe Fittings......................... 46
Hose, Hose Assemblies, Tubing.......................................................................................... 47
Pneumatic Oil / Ball Valves.................................................................................................. 48
Table of Contents
Gauges
Pressure Gauges ................................................................................................................ 49
Wainbee
Manual Clamps
Pneumatic Clamps............................................................................................................... 50
DE-STA-CO
Manual Clamps ............................................................................................................51 - 53
Quick Figures,
Formulas
Quick NPT Thread Reference.............................................................................................. 54
Conversion Factors...............................................................................................................54
Fluid Power Formulas ..........................................................................................................55
= Wainbee stock
(All others available for Quick Ship)
"B" Series Valves: Inline or Manifold Mount
3 & 4-Way, 2 & 3-Position Solenoid
Operating pressure: vacuum to 145 PSIG (vacuum to 10 bar)
Single Solenoid
4-Way, 2-Position
Inline
4
Part No.
2
#14
#12
5
1
3
Port Size
(NPT)
3 Pin
Connector
CV
(ANSI)
Voltage
Other Voltages
Available from Stock
B310BB553C
¹⁄₈"
0.75
120
B511BB553C
¹⁄v"
1.4
120
B512BB553C
³⁄₈"






1.4
120
2.7
120
5.9
120
7.0
120






B612BB553A
³⁄₈"
B713BB553A
¹⁄₂"
B814BB553A
³⁄₄"
Single Solenoid, 2-Position, Air Return, Internal Pilot, Inline or Manifold Mount, 15mm, 3-pin, DIN 43650C
Double Solenoid
Part No.
4-Way, 2-Position
Inline
4
2
#14
1
3 Pin
Connector
CV
(ANSI)
Voltage
Other Voltages
b320bb553C
¹⁄₈"

0.75
120

b522bb553C
³⁄₈"

1.4
120

b622bb553A
³⁄₈"

2.7
120


5.9
120


7.0
120

b723bb553A
#12
5
Port Size
(NPT)
b824bb553A
3
¹⁄₂"
³⁄₄"
Double Solenoid, 2-Position, Internal Pilot, Inline or Manifold Mount, 15mm, 3-pin, DIN 43650C
Double Solenoid
4-Way, 3-Position,
APB, Inline
Part No.
APB
4
2
#14
#12
5
1
3
Operator/Function Style 5
Port Size
(NPT)
3 Pin
Connector
CV
(ANSI)
Voltage
Other Voltages
b350bb553C
¹⁄₈"

0.60
120

b552bb553C
³⁄₈"

1.1
120

b652bb553A
³⁄₈"

2.1
120

B753BB553A
¹⁄₂"

5.7
120

B854BB553A
³⁄₄"

7.0
120

Double Solenoid, 3-Position, Internal Pilot, Inline or Manifold Mount, 15mm 3-pin, DIN 43650C
Other Centre Conditions are available from stock
Modification (APB = All Ports Blocked; CE = Centre Exhaust; PC = Pressure Centre)
Single Solenoid
3-Way, 2-Position, NC
Inline
Part No.
2
#12
#10
3
Port Size
(NPT)
3 Pin
Connector
CV
(ANSI)
Voltage
Other Voltages
B3G0BB553C
¹⁄₈"

0.75
120

B5G2BB553C
³⁄₈"

1.4
120

1
Other voltages available in stock: 24VAC, 240 VAC, 12VDC, 24VDC
Quick link to : Table of Contents
1
Toll-Free: 1-888-WAINBEE (924-6233) www.wainbee.com
= Wainbee stock
"B" Series Valves: Inline or Manifold mount
3-Way & 4-Way, 2 & 3-Position Pilot
Operating pressure: vacuum to 145 PSIG (vacuum to 10 bar)
Single Remote Pilot
4-Way, 2-Position
Inline
4
Part No.
2
#14
#12
5
1
3
Port Size
(NPT)
Pilot Port
CV (ANSI)
B330000XXC
¹⁄₈"
M5
0.75
B532000XXC
³⁄₈"
¹⁄₈"
1.4
B632000XXA
³⁄₈"
¹⁄₈"
2.7
B733000XXA
¹⁄₂"
¹⁄₈"
5.9
B834000XXA
³⁄₄"
¹⁄₈"
7.0
Single Remote Pilot, 2-Position, Air Return, Internal Pilot, Inline or Manifold Mount.
Double Remote Pilot
4-Way, 2-Position
Inline
4
Part No.
2
#14
#12
5
1
3
Port Size
(NPT)
Pilot Port
CV (ANSI)
B340000XXC
¹⁄₈"
M5
0.75
B542000XXC
³⁄₈"
¹⁄₈"
1.4
B642000XXA
³⁄₈"
¹⁄₈"
2.7
B743000XXA
¹⁄₂"
¹⁄₈"
5.9
B844000XXA
³⁄₄"
¹⁄₈"
7.0
Double Remote Pilot, 2-Position, Air Return, Internal Pilot, Inline or Manifold Mount.
Single Remote Pilot
3-Way, 2-Position, normally closed
Inline, convertible to
normally open
2
#12
#10
3
1
Part No.
Port Size
(NPT)
Pilot Port
CV (ANSI)
B3K0000XXC
¹⁄₈"
M5
0.75
B5K2000XXC
³⁄₈"
¹⁄₈"
1.4
B6X2000XXA
³⁄₈"
¹⁄₈"
2.7
B7X3000XXA
¹⁄₂"
¹⁄₈"
5.9
B8X4000XXA
³⁄₄"
¹⁄₈"
7.0
Single Remote Pilot, 2-Position, Air Return, Internal Pilot, Inline or Manifold Mount.
Double Remote Pilot
4-Way, 3-Position, APB
Inline
Model Number
APB
4 2
#14
#12
5
1
3
Port Size
(NPT)
Pilot Port
CV (ANSI)
B380000XXC
¹⁄₈"
M5
0.60
B582000XXC
³⁄₈"
¹⁄₈"
1.1
B682000XXA
³⁄₈"
¹⁄₈"
2.1
B783000XXA
¹⁄₂"
¹⁄₈"
5.7
B884000XXA
³⁄₄"
¹⁄₈"
6.6
Double Remote Pilot, 3-Position, Air Return, Internal Pilot, Inline or Manifold Mount.
Other Centre Conditions are available from stock
Modification (APB = All Ports Blocked; CE = Centre Exhaust; PC = Pressure Centre)
2
= Wainbee stock
"B" Series Valves
Female Electrical Connectors
Field DIN Connectors DIN 43650C
Part No.
Type
Color
Cable Gland
Circuit & Voltage
Contacts
KC136000B7
FORM C 8MM
Black
PG7
No Circuit
Circuit 1
KC136V54T7
FORM C 8MM
Transparent
PG7
24V Varistor and LED
Circuit 2
KC136V55T7
FORM C 8MM
Transparent
PG7
115V Varistor and LED
Circuit 2
circuit 1
circuit 2
15mm 3-Pin DIN 43650C to 1/2" Conduit
47mm
25.4mm
Description
PS2998P
1/2" NPTF Conduit – Unlighted
with 3' (1m) Leads 20AWG Wire
*
16mm
1
Connector
3
2
(Use with Enclosure "5")
1
* Ground spade offset by
0.2mm toward pin 1.
8mm
➤
➤
1
0
Note: Rated up to 250VAC or VDC; 6 Amps
IP65 rated when properly installed.
Solenoid Kits
Suits: B3, B5, B6, B7, B8
Enclosure "5"
15mm 3-Pin Male
Voltage
PS2982B42P
24VAC
PS2982B45P
12VDC
PS2982B49P
24VDC
PS2982B53P
120VAC
PS2982B57P
240VAC
3
= Wainbee stock
Mechanical Valves: 3-Way Spool Valves
Directair 2 Series (¹⁄₈" NPT) & Directair 4 Series (¹⁄₄" NPT)
Vacuum to 150 PSI
¹⁄₈" - 0.20 Cv
¹⁄₄" - 0.83 Cv
Button Operated
41441 1000
52441 1000
Button Operated
41493 1000
52443 1000
1/8 npt, Button Operated, Spring Return
#12 #12
Operator
Operator
End End
1/8 npt, Button Operated, Manual Return
22
1
41441 1000
41493 1000
Spring Return
Operated pulled last – Pressure at Inlet port 1 is blocked.
Outlet port 2 is connected to Exhaust port 3.
Actuated Position – Pressure at Inlet port 1 is connected to
Outlet port 2. Exhaust port 3 is blocked.
Operated pushed last – Pressure at Inlet port 1 is
connected to Outlet port 2. Exhaust port 3 is blocked.
Treadle Operated
#12
Operator
End
Pedal Operated
1/4 npt, Treadle Operated, Detented
2
33
52443 1000
52441 1000
Spring Return
Normal Position – Pressure at Inlet port 1 is blocked.
52493 1000
1
#10#10
Operator
Operator
End
End
52471 1000
1/4 npt, Pedal Operated, Spring Return
#10
Operator
End
3
1
Treadle
Toe pressed last – Pressure at Inlet port 1 is blocked.
Pedal
Heel pressed last – Pressure at Inlet port 1 is connected
to Outlet port 2. Exhaust port 3 is blocked.
Actuated Position – Pressure at Inlet port 1 is connected
to Outlet port 2. Exhaust port 3 is blocked.
!
!
CAUTION:
This valve shall not be used to actuate a punch press.
Do not use this valve on punch presses or press brakes.
Note: For conversion factors see page 54
4
CAUTION:
= Wainbee stock
Vacuum to 150 PSI
¹⁄₈" - 0.20 Cv
¹⁄₄" - 0.83 Cv
Roller/One-Way Tripper Operated
Lever/Hand Operated
41421 1000
1/8 npt, Roller Operated, Spring Return
41471 1000
1/8 npt, Hand Lever Operated, Spring Return
41431 1000
1/8 npt, One-Way Tripper, Spring Return
52481 1000
1/4 npt, Lever Operated, Spring Return
52421 1000
1/4 npt, Delrin Roller Operated, Spring Return
#12
Operator
End
2
#10
Operator
End
3
1
2
#12
Operator
End
#10
Operator
End
3
1
52421 1000
41421 1000
52481 1000
41471 1000
41431 1000
Spring Return
Roller
Toggle/Lever Operated
Lever Operated - 3-Position
41481 1000
1/8 npt, Toggle Operated, Detented
52483 1000
1/4 npt, Lever Operated, Manual Return
2
#12
Operator
End
52383 1000
#10
Operator
End
3
3
2
2
#12
Operator
End
#10
Operator
End
1
1
#12
Operator
End
1/4 npt, Lever Operated, 3-Position Detented,
All Ports Blocked
#10
Operator
End
3
1
41481 1000
52483 1000
Manual Return
Lever
Operated pushed last (toward body) – Pressure at Inlet port 1 is
blocked. Outlet port 2 is connected to Exhaust port 3.
blocked. Outlet port 2 is connected to Exhaust port 3.
Operated pulled last (away from body) – Pressure at Inlet port 1 is
Center Position – All ports blocked.
Panel Mounting Kit No. 52083 8004
.20 Dia.
Available for panel mounting direct pipe ported, lever operated
"Directair 4" Series valves only. Kit includes a flange and two screws.
1.75
5
= Wainbee stock
Vacuum to 150 PSI
¹⁄₈" - 0.20 Cv
¹⁄₄" - 0.83 Cv
Button Operated
Button Operated
41041 1000
41093 1000
52041 1000
52043 1000
4
#14
Operator
End
2
5
#12
Operator
End
4
#14
Operator
End
3
2
1
4
#14
Operator
End
3
5
1
2
5
#12
Operator
End
#12
Operator
End
3
1
41041 1000
41093 1000
52041 1000
52043 1000
Spring Return
Manual Return
Normal Position – Pressure at Inlet port 1 is connected to
Outlet port 2. Outlet port 4 is connected to Exhaust port 5.
Operated pulled last – Pressure at Inlet port 1 is connected to
Operated pushed last – Pressure at Inlet port 1 is connected to
Pedal & Treadle Operated
Roller Operated
52071 1000
1/4 npt, Pedal Operated, Spring Return
41021 1000
1/8 npt, Roller operated, Spring Return
52093 1000
1/4 npt, Treadle Operated, Detented
52021 1000
1/4 npt, Delrin Roller operated, Spring Return
4
2
#14
Operator
End
5
4
#14
Operator
End
#12
Operator
End
5
3
1
4
#12
Operator
End
3
1
2
#14
Operator
End
5
2
#12
Operator
End
3
#14
Operator
End
52093 1000
2
5
3
#14
Operator
End
2
5
1
4
4
#12
Operator
End
3
1
#12
Operator
End
1
52071
1000
41021 1000
52021 1000
Treadle
Roller
Toe pressed last – Pressure at Inlet port 1 is connected to
Heel pressed last – Pressure at Inlet port 1 is connected
to Outlet port 4. Outlet port 2 is connected to Exhaust port 3.
!
CAUTION:
6
= Wainbee stock
Vacuum to 150 PSI
¹⁄₈" - 0.20 Cv
¹⁄₄" - 0.83 Cv
Lever/Hand Operated
Lever Operated
41071 1000
1/8 npt, Hand Lever Operated, Spring Return
41081 1000
1/8 npt, Detented Toggle, Spring Return
52081 1000
1/4 npt, Lever Operated, Spring Return
52083 1000
1/4 npt, Lever Operated, Manual Return
4
#14
Operator
End
2
5
4
#14
Operator
End
#12
Operator
End
2
5
3
1
3
1
2
#12
Operator
End
#12
Operator
End
#10
Operator
End
52083 1000
3
1
52081 1000
41081 1000
41071 1000
Spring Return
Manual Return
connected to Outlet port 2. Outlet port 4 is connected to Exhaust port 5.
connected to Outlet port 4. Outlet port 2 is connected to Exhaust port 3.
Lever Operated, 3-Position
Lever, Operated Spring Centered
Type 1, Closed Center Spool
52181 1000
#14
Operator
End
Lever Operated, 3-Position
4 2
5
Lever, Operated Detented
Type 1, Closed Center Spool
52183 1000
#14
Operator
End
#12
Operator
End
4 2
5
3
#12
Operator
End
3
1
1
Spring Centered, 3-Position
Detented, 3-Position
Lever Pulled (away from body) – Pressure at Inlet port 1 is connected
Lever Pulled (away from body) – Pressure at Inlet port 1 is connected
Lever Pushed (toward body) – Pressure at Inlet port 1 is connected
Lever Pushed (toward body) – Pressure at Inlet port 1 is connected
Centered Position – Type 1: All ports blocked.
Centered Position – Type 1: All ports blocked.
Other Center Positions are available from stock
Other Center Positions are available from stock
Type 2: Pressure center
Type 2: Pressure center
Type 3: Exhaust center
Type 3: Exhaust center
7
= Wainbee stock
Pneumatic Lever Valves
4-Way, 4-Way,
4-Port, 4-Port,
3-Position
3-Position
PL / VL Series Valves
Flow Ratings (Cv)
(PL)
Standard Side Port
PL25
VL25
(VL)
PL37
VL37
PL50
Application
These are 4-Way, 3-Position, rotary disc, direct-operated air
valves. Air pressure from the inlet port is confined beneath the
disc making the seal tighten as the pressure increases, yet friction
between the lapped surfaces is so low that only 15 lb. of force is
required to move the lever at 100 PSI line pressure.
Valves are detented.
Operating handles may be installed in any of four positions.
VL50
Cv
Port Size
2.5
¹⁄₄" NPT
3.0
³⁄₈" NPT
6.2
¹⁄₂" NPT
Operating Pressure Range
0 to 150 PSIG (0 to 1035 kPa)
Operating Temperature
18° to 200°F (-8° to 93°C)
Lubrication Filtered and lubricated air recommended for maximum valve
life and minimum maintenance.
3-Position
HV Series Valves
4-Way, 4-Way,
4-Port, 4-Port,
3-Position
Flow Ratings (Cv)
CW
N
CCW
C2 C1
IN EXH
Part Number
Cv
Port Size
HVN4200-8
0.5
¹⁄₄" NPT
HVN4400-10
1.4
³⁄₈" NPT
HVN4400-15
1.5
¹⁄₂" NPT
Operating Pressure Range: 0 to 150 PSIG (0 to 1035 kPa)
Features
Operating Temperature: 32° to 166°F (0° to 60°C)
• Compact and simple design
• 4-Way, 3-Position
• Rotary disc, direct-operated valves
• Side porting
• Detent action, smooth lever actuation
• General pneumatic applications
Lubrication
Filtered and lubricated air recommended for maximum valve life and
minimum maintenance.
Materials
Cover - Zinc
Body - Aluminum
Seals - Polyurethane
42 Series Valves 4-Way, 5-Port, 3-Position
4
#14
Operator
End
2
Lever Valve - Inline
#12
Operator
End
Single Pressure
5 1 3
APB
4
#14
Operator
End
2
#12
Operator
End
5 1 3
CE
(Perpendicular shown)
Type
Port
422CR013W
422CR023W
1.3
3-Pos APB
¹⁄₄" NPT
³⁄₈" NPT
422CR014W
422CR024W
1.3
3-Pos CE
¹⁄₄" NPT
³⁄₈" NPT
Operating pressure vacuum to 150 PSI (710 mm Hg to 1035 kPa)
Operating temperature: 0° to 140°F (-18°C to 60°C)
Features
• 3-position parallel
• 2-position parallel or perpendicular
• 2-position foot pedal
Cv
8
= Wainbee stock
Global Air Preparation System: Filters
Mini Particulate Filter - P31
• Integral 1/4" NPT ports. BSPP & BSPT options also
available to order
• High efficiency 5 micron element as standard
• Excellent water removal efficiency
• Robust but lightweight aluminum construction
• One hand operation for easy element cartridge removal
• Positive bayonet latch to ensure correct & safe fitting
Symbols
1
2
1
Manual drain
Port size
Description
2
Auto drain
Order Code
Flow - dm3/s (scfm)
Max. - bar (psig)
Height - mm (inches)
Width - mm (inches)
1/4" NPT
Poly bowl - Manual drain
P31FA92EGMN
12 (25)
10 (150)
116.3 (4.58)
40 (1.58)
Depth - mm (inches)
42.7 (1.68)
1/4" NPT
Poly bowl - Pulse drain
P31FA92EGBN
12 (25)
10 (150)
116.3 (4.58)
40 (1.58)
42.7 (1.68)
1/4" NPT
Metal bowl - Manual drain
P31FA92EMMN
12 (25)
17 (250)
116.3 (4.58)
40 (1.58)
42.7 (1.68)
1/4" NPT
Metal bowl - Pulse drain
P31FA92EMBN
12 (25)
17 (250)
116.3 (4.58)
40 (1.58)
42.7 (1.68)
Compact Particulate Filter - P32
Symbols
1
2
1
Manual drain
Port size
Description
• Integral 1/4", 3/8" or 1/2" NPT ports. BSPP & BSPT
options also available to order.
2
Auto drain
Order Code
Flow - dm3/s (scfm)
Max. - bar (psig)
Width - mm (inches)
1/4" NPT
P32FA92EGMN
18 (38)
10 (150)
188 (7.4)
60 (2.36)
Depth - mm (inches)
60 (2.36)
1/4" NPT
Poly bowl - Auto drain
P32FA92EGAN
18 (38)
10 (150)
182 (7.2)
60 (2.36)
60 (2.36)
1/4" NPT
P32FA92ESMN
18 (38)
17 (250)
188 (7.4)
60 (2.36)
60 (2.36)
1/4" NPT
Metal bowl - Auto drain
P32FA92ESAN
18 (38)
17 (250)
182 (7.2)
60 (2.36)
60 (2.36)
3/8" NPT
P32FA93EGMN
30 (64)
10 (150)
188 (7.4)
60 (2.36)
60 (2.36)
3/8" NPT
P32FA93EGAN
30 (64)
10 (150)
182 (7.2)
60 (2.36)
60 (2.36)
3/8" NPT
P32FA93ESMN
30 (64)
17 (250)
188 (7.4)
60 (2.36)
60 (2.36)
3/8" NPT
P32FA93ESAN
30 (64)
17 (250)
182 (7.2)
60 (2.36)
60 (2.36)
1/2" NPT
P32FA94EGMN
38 (80)
10 (150)
188 (7.4)
60 (2.36)
60 (2.36)
1/2" NPT
P32FA94EGAN
38 (80)
10 (150)
182 (7.2)
60 (2.36)
60 (2.36)
1/2" NPT
P32FA94ESMN
38 (80)
17 (250)
188 (7.4)
60 (2.36)
60 (2.36)
1/2" NPT
P32FA94ESAN
38 (80)
17 (250)
182 (7.2)
60 (2.36)
60 (2.36)
Standard Particulate Filter - P33
Symbols
1
2
Manual drain
Port size
Description
1
• Integral 1/2" or 3/4" NPT ports. BSPP & BSPT options
also available to order.
2
Auto drain
Order Code
Flow - dm3/s (scfm)
Max. - bar (psig)
Width - mm (inches)
1/2" NPT
P33FA94EGMN
40 (85)
10 (150)
213 (8.4)
73 (2.9)
73 (2.9)
1/2" NPT
P33FA94EGAN
40 (85)
10 (150)
207 (8.2)
73 (2.9)
73 (2.9)
1/2" NPT
P33FA94ESMN
40 (85)
17 (250)
213 (8.4)
73 (2.9)
73 (2.9)
1/2" NPT
P33FA94ESAN
40 (85)
17 (250)
207 (8.2)
73 (2.9)
73 (2.9)
3/4" NPT
P33FA96EGMN
48 (102)
10 (150)
213 (8.4)
73 (2.9)
73 (2.9)
3/4" NPT
P33FA96EGAN
48 (102)
10 (150)
207 (8.2)
73 (2.9)
73 (2.9)
3/4" NPT
P33FA96ESMN
48 (102)
17 (250)
213 (8.4)
73 (2.9)
73 (2.9)
3/4" NPT
P33FA96ESAN
48 (102)
17 (250)
207 (8.2)
73 (2.9)
73 (2.9)
9
Depth - mm (inches)
= Wainbee stock
Global Air Preparation System: Regulators
Mini Regulator - P31
•
•
•
•
•
•
•
Port
size
NPT
Symbols for Regulators on this page
Integral 1/4" NPT ports. BSPP & BSPT options also available
to order
Robust but lightweight aluminum construction
Secondary Pressure: 0-8 bar (0-125 PSIG)
Other ranges available to order: 0-2 bar (0-30 PSIG) , 0-4 bar
(0-60 PSIG)
Secondary aspiration plus balanced poppet provides quick
response and accurate pressure regulation.
Relieving & Non-relieving types
Non-rising knob
Description
Order Code
Flow
dm3/s
(scfm)
Max.
bar
(psig)
Height
mm
(in)
Width
mm
(in)
Depth
mm
(in)
1/4"
8 bar (125 psig)
relieving
P31RA92BNNP
30 (64)
20 (300)
100.1
(3.94)
40
(1.58)
40
(1.58)
1/4"
8 bar (125 psig)
relieving + gauge
P31RA92BN5P
30 (64)
20 (300)
100.1
(3.94)
40
(1.58)
64.3
(2.53)
3
1
Self relieving regulator
with gauge
•
•
•
•
•
•
Mini Common - P1 - Regulator - P31
•
•
•
•
•
•
P1
P2
Port
size
NPT
1/4"
P2
P2
P2
•
•
Port
size
NPT
Manifold style regulator with line pressure on
both sides.
Pressure output is at front or rear.
Integral 1/4" NPT ports. BSPP & BSPT options
also available to order
Robust construction
Other ranges available to order: 0-2 bar (0-30
PSIG) , 0-4 bar (0-60 PSIG)
Secondary aspiration plus balanced poppet
provides quick response and accurate pressure
regulation
Non-rising knob
Description
Order Code
Flow
dm3/s
(scfm)
Max.
bar
(psig)
Height
mm
(in)
Width
mm
(in)
Depth
mm
(in)
8 bar (125 psig) relieving
P31HA92BNNP
18 (38)
20 (300)
100.1
(3.94)
40
(1.58)
40
(1.58)
Description
Order Code
1/4"
8 bar (125 psig)
Relieving
P32RA92BNNP
•
•
Port
size
NPT
Order Code
Flow
dm3/s
(scfm)
Max.
bar
(psig)
Height
mm
(in)
Width
mm
(in)
Depth
mm
(in)
1/2"
8 bar (125 psig)
Relieving
P33RA94BNNP
100
(212)
20
(300)
149
(5.9)
73 (2.9)
73 (2.9)
1/2"
8 bar (125 psig)
Relieving + Gauge
P33RA94BNGP
100
(212)
20
(300)
149
(5.9)
73 (2.9)
73 (2.9)
3/4"
8 bar (125 psig)
Relieving
P33RA96BNNP
100
(212)
20
(300)
149
(5.9)
73 (2.9)
73 (2.9)
3/4"
8 bar (125 psig)
Relieving + Gauge
P33RA96BNGP
100
(212)
20
(300)
149
(5.9)
73 (2.9)
73 (2.9)
Height
mm
(in)
Width
mm
(in)
Depth
mm
(in)
41 (81)
20 (300)
136
(5.4)
60
(2.36)
60
(2.36)
8 bar (125 psig)
Relieving + Gauge
P32RA92BNGP
41 (81)
20 (300)
136
(5.4)
60
(2.36)
60
(2.36)
8 bar (125 psig)
Relieving
P32RA93BNNP
65 (138)
20 (300)
136
(5.4)
60
(2.36)
60
(2.36)
3/8"
8 bar (125 psig)
Relieving + Gauge
P32RA93BNGP
65 (138)
20 (300)
136
(5.4)
60
(2.36)
60
(2.36)
1/2"
8 bar (125 psig)
Relieving
P32RA94BNNP
67 (142)
20 (300)
136
(5.4)
60
(2.36)
60
(2.36)
1/2"
8 bar (125 psig)
Relieving + Gauge
P32RA94BNGP
67 (142)
20 (300)
136
(5.4)
60
(2.36)
60
(2.36)
Compact Common P1 Regulator - P32
•
•
•
Integral 1/2" or 3/4" NPT ports. BSPP & BSPT options also
available to order
(0-60 PSIG)
response and accurate pressure regulation
Non-rising knob
Description
Max.
bar
(psig)
1/4"
Standard Regulator - P33
•
Flow
dm3/s
(scfm)
3/8"
•
•
•
•
•
Non relieving regulator
Integral 1/4", 3/8" or 1/2" NPT ports. BSPP & BSPT options
available to order.
(0-60 PSIG)
response and accurate pressure regulation
Non-rising knob
•
•
2
Compact Regulator - P32
•
•
1
2
•
•
•
P1
P2
Port
size
NPT
10
P2
Description
P2
Manifold style regulator with line pressure on
both sides.
Pressure output is at front or rear.
Integral 1/4", 3/8" or 1/2" NPT ports. BSPP &
BSPT options available to order.
Robust construction
Other ranges available to order: 0-2 bar (0-30
PSIG) , 0-4 bar (0-60 PSIG)
Secondary aspiration plus balanced poppet
provides quick response and accurate pressure regulation
Non-rising knob
P2
Order Code
Flow
dm3/s
(scfm)
Max.
bar
(psig)
Height
mm
(in)
Width
mm
(in)
Depth
mm
(in)
1/4"
8 bar (125 psig)
relieving
P32HA92BNNP
28 (59)
20 (300)
136
(5.4)
60
(2.36)
60
(2.36)
3/8"
8 bar (125 psig)
relieving
P32HA93BNNP
28 (59)
20 (300)
136
(5.4)
60
(2.36)
60
(2.36)
1/2"
8 bar (125 psig)
relieving
P32HA94BNNP
28 (59)
20 (300)
136
(5.4)
60
(2.36)
60
(2.36)
= Wainbee stock
Global Air Preparation System: Lubricators
Mini Lubricator - P31
Symbols
1
• Integral 1/4" NPT ports. BSPP & BSPT options also
available to order.
• Proportional oil delivery over a wide range of air flows
• Finger tip rachet control for precise oil drip rate adjustment
2
Lubricator
with drain
Order Code
Flow - dm3/s (scfm)
Max. - bar (psig)
Width - mm (inches)
1/4" NPT
Port size
Poly bowl - No drain
Description
P31LA92LGNN
13 (28)
10 (150)
147.5 (5.80)
40 (1.58)
Depth - mm (inches)
42.7 (1.68)
1/4" NPT
Metal bowl - No drain
P31LA92LMNN
13 (28)
17 (250)
147.5 (5.80)
40 (1.58)
42.7 (1.68)
Compact Lubricator - P32
Symbols
1
• Integral 1/4", 3/8" or 1/2" NPT ports. BSPP & BSPT
options also available to order.
• Fill from top under system pressure
2
Lubricator
with drain
Port size
Order Code
Flow - dm3/s (scfm)
Max. - bar (psig)
Width - mm (inches)
Depth - mm (inches)
P32LA92LGNN
P32LA92LSNN
18 (38)
18 (38)
10 (150)
17 (250)
211 (8.30)
211 (8.30)
60 (2.36)
60 (2.36)
60 (2.36)
60 (2.36)
3/8" NPT
P32LA93LGNN
32 (68)
10 (150)
211 (8.30)
60 (2.36)
60 (2.36)
3/8" NPT
P32LA93LSNN
32 (68)
17 (250)
211 (8.30)
60 (2.36)
60 (2.36)
1/2" NPT
P32LA94LGNN
47 (100)
10 (150)
211 (8.30)
60 (2.36)
60 (2.36)
1/2" NPT
P32LA94LSNN
47 (100)
17 (250)
211 (8.30)
60 (2.36)
60 (2.36)
1/4" NPT
1/4" NPT
Description
Standard Lubricator - P33
Symbols
1
• Integral 1/2" or 3/4" NPT ports. BSPP & BSPT options
available to order.
• Fill from top under system pressure
2
Lubricator
with drain
Order Code
Flow - dm3/s (scfm)
Max. - bar (psig)
Width - mm (inches)
1/2" NPT
Port size
Description
P33LA94LGNN
48 (102)
10 (150)
234 (9.21)
73 (2.9)
73 (2.9)
1/2" NPT
P33LA94LSNN
48 (102)
17 (250)
234 (9.21)
73 (2.9)
73 (2.9)
3/4" NPT
P33LA96LGNN
68 (144)
10 (150)
234 (9.21)
73 (2.9)
73 (2.9)
3/4" NPT
P33LA96LSNN
68 (144)
17 (250)
234 (9.21)
73 (2.9)
73 (2.9)
11
Depth - mm (inches)
= Wainbee stock
Global Air Preparation System: Filter/Regulator "Piggybacks"
Mini Filter/Regulator - P31
Symbols
1
Port size
•
•
•
2
•
•
•
•
•
Description
Integral 1/4" NPT ports. BSPP & BSPT options also available to order.
High efficiency 5 micron element as standard
Excellent water removal efficiency
Positive bayonet latch to ensure correct & safe fitting
Other ranges available to order: 0-2 bar (0-30 PSIG) , 0-4 bar (0-60 PSIG)
Secondary aspiration plus balanced poppet provides quick response and accurate pressure regulation
Order Code
Flow - dm3/s (scfm)
Max. - bar (psig)
Width - mm (inches)
Depth - mm (inches)
8 bar (125 psig) Relieving
1/4" NPT
P31EA92EGMBN5P
14 (30)
10 (150)
164.1 (6.46)
40 (1.58)
64 (2.53)
1/4" NPT
1/4" NPT
1/4" NPT
Poly bowl - Pulse drain
Metal bowl - Pulse drain
P31EA92EGBBN5P
P31EA92EMMBN5P
P31EA92EMBBN5P
14 (30)
14 (30)
14 (30)
10 (150)
17 (250)
17 (250)
164.1 (6.46)
164.1 (6.46)
164.1 (6.46)
40 (1.58)
40 (1.58)
40 (1.58)
64 (2.53)
64 (2.53)
64 (2.53)
Compact Filter/Regulator - P32
Symbols
1
Port size
•
•
•
2
•
•
•
•
•
Description
Integral 1/4", 3/8" or 1/2" NPT ports. BSPP & BSPT options also available to order.
Order Code
Flow - dm3/s (scfm)
Max. - bar (psig)
Width - mm (inches)
Depth - mm (inches)
1/4" NPT
1/4" NPT
P32EA92EGMBNGP
P32EA92EGABNGP
42 (89)
42 (89)
10 (150)
10 (150)
254 (10.0)
248 (9.76)
60 (2.36)
60 (2.36)
60 (2.36)
60 (2.36)
1/4" NPT
P32EA92ESMBNGP
42 (89)
17 (250)
245 (9.66)
60 (2.36)
60 (2.36)
1/4" NPT
P32EA92ESABNGP
42 (89)
17 (250)
254 (10.0)
60 (2.36)
60 (2.36)
3/8" NPT
P32EA93EGMBNGP
58 (123)
10 (150)
254 (10.0)
60 (2.36)
60 (2.36)
3/8" NPT
P32EA93EGABNGP
58 (123)
10 (150)
248 (9.76)
60 (2.36)
60 (2.36)
3/8" NPT
P32EA93ESMBNGP
58 (123)
17 (250)
245 (9.66)
60 (2.36)
60 (2.36)
3/8" NPT
P32EA93ESABNGP
58 (123)
17 (250)
254 (10.0)
60 (2.36)
60 (2.36)
1/2" NPT
P32EA94EGMBNGP
64 (136)
10 (150)
245 (9.66)
60 (2.36)
60 (2.36)
1/2" NPT
P32EA94EGABNGP
64 (136)
10 (150)
248 (9.76)
60 (2.36)
60 (2.36)
1/2" NPT
P32EA94ESMBNGP
64 (136)
17 (250)
245 (9.66)
60 (2.36)
60 (2.36)
1/2" NPT
P32EA94ESABNGP
64 (136)
17 (250)
254 (10.0)
60 (2.36)
60 (2.36)
Standard Filter/Regulator - P33
Symbols
1
Port size
Description
•
•
•
2 •
•
•
•
•
Integral 1/2" or 3/4" NPT ports. BSPP & BSPT options also available to order.
Order Code
Flow - dm3/s (scfm)
Max. - bar (psig)
Width - mm (inches)
Depth - mm (inches)
1/2" NPT
P33EA94EGMBNGP
90 (191)
10 (150)
291 (11.44)
73 (2.9)
73 (2.9)
1/2" NPT
P33EA94EGABNGP
90 (191)
10 (150)
285 (11.22)
73 (2.9)
73 (2.9)
1/2" NPT
P33EA94ESMBNGP
90 (191)
17 (250)
282 (11.0)
73 (2.9)
73 (2.9)
1/2" NPT
P33EA94ESABNGP
90 (191)
17 (250)
291 (11.44)
73 (2.9)
108 (4.27)
3/4" NPT
P33EA96EGMBNGP
98 (208)
10 (150)
282 (11.0)
73 (2.9)
108 (4.27)
3/4" NPT
P33EA96EGABNGP
98 (208)
10 (150)
285 (11.22)
73 (2.9)
108 (4.27)
3/4" NPT
P33EA96ESMBNGP
98 (208)
17 (250)
291 (11.44)
73 (2.9)
73 (2.9)
3/4" NPT
P33EA96ESABNGP
98 (208)
17 (250)
282 (11.0)
73 (2.9)
73 (2.9)
12
= Wainbee stock
Global Air Preparation System: Popular Combinations - P31 Series
Filter + Regulator + Lubricator Combinations + Poly bowl
5 micron element, 8 bar (116 psig) Regulator + Gauge and Wall Mounting Brackets
Inlet pressure 10 bar (145 psig), Secondary pressure 6.3 bar (91.3 psig),
1 bar (14.5 psig) pressure drop.
Port size
1/4" NPT
Flow
dm³/s
(scfm)
13
27
Manual Drain
Weight
Pulse Drain
Weight
P31CB92GEMN5LNW
0.46 kg (1.01 lbs)
P31CB92GEBN5LNW
0.46 kg (1.01 lbs)
Filter/Regulator + Lubricator Combinations + Poly bowl
Port size
1/4" NPT
Flow
dm³/s
(scfm)
14
28
Manual Drain
Weight
Pulse Drain
Weight
P31CA92GEMN5LNW
0.35 kg (0.77 lbs)
P31CA92GEBN5LNW
0.35 kg (0.77 lbs)
13
= Wainbee stock
Port size
Flow
dm³/s
Manual Drain
Weight
Pulse Drain
Weight
(scfm)
1/4" NPT
20
42
P32CB92GEMNGLNW
1.29 kg (2.84 lbs)
P32CB92GEANGLNW
1.29 kg (2.84 lbs)
3/8" NPT
32
68
P32CB93GEMNGLNW
1.29 kg (2.84 lbs)
P32CB93GEANGLNW
1.29 kg (2.84 lbs)
1/2" NPT
40
85
P32CB94GEMNGLNW
1.29 kg (2.84 lbs)
P32CB94GEANGLNW
1.29 kg (2.84 lbs)
Port size
Flow
dm³/s
Manual Drain
Weight
Pulse Drain
Weight
(scfm)
1/4" NPT
22
45
P32CA92GEMNGLNW
1.03 kg (2.27 lbs)
P32CA92GEANGLNW
1.03 kg (2.27 lbs)
3/8" NPT
33
70
P32CA93GEMNGLNW
1.03 kg (2.27 lbs)
P32CA93GEANGLNW
1.03 kg (2.27 lbs)
1/2" NPT
43
90
P32CA94GEMNGLNW
1.03 kg (2.27 lbs)
P32CA94GEANGLNW
1.03 kg (2.27 lbs)
14
= Wainbee stock
Port size
Flow
dm³/s
Manual Drain
Weight
Pulse Drain
Weight
1.84 kg (4.06 lbs)
1.84 kg (4.06 lbs)
(scfm)
1/4" NPT
43
90
P33CB94GEMNGLNW
1.84 kg (4.06 lbs)
P33CB94GEANGLNW
3/4" NPT
52
110
P33CB96GEMNGLNW
1.84 kg (4.06 lbs)
P33CB96GEANGLNW
Port size
Flow
Manual Drain
Weight
Pulse Drain
Weight
110
P33CA94GEMNGLNW
1.51 kg (3.33 lbs)
P33CA94GEANGLNW
1.51 kg (3.33 lbs)
150
P33CA96GEMNGLNW
1.51 kg (3.33 lbs)
P33CA96GEANGLNW
1.51 kg (3.33 lbs)
dm³/s
(scfm)
1/4" NPT
52
3/4" NPT
71
15
= Wainbee stock
Global Air Preparation System: P31, P32, P33 Series
Safety Lockout Valves
• The Safety Lockout valve is a manually operated, slide-type, 2-position,
3-way valve. In the closed position, downstream
• air pressure is exhausted to atmosphere.
• The valve slide can be locked in the closed position with a customer supplied
padlock.
• The Safety Lockout valves conform to OSHA #29 CFR part 1910 – control of
hazardous energy source (lockout / tagout).
• Left to right flow — orange slide
• Right to left — yellow slide
Ordering Information
Model
type
P31
P32
P33
Specifications
Port
size
1/4"
1/4"
3/8"
1/2"
1/2"
Thread
type
NPT
NPT
NPT
NPT
NPT
Flow
dm³/s (scfm)
47.2 (100)
66.5 (141)
101.9 (216)
128.4 (272)
136.9 (290)
Safety Lockout Valve
Flow from left to right
P31VA92LSAN
P32VA92LSAN
P32VA93LSAN
P32VA94LSAN
P33VA94LSAN
Flow from right to left
P31VA92LSBN
P32VA92LSBN
P32VA93LSBN
P32VA94LSBN
P33VA94LSBN
3/4"
NPT
141.6 (300)
P33VA96LSAN
P33VA96LSBN
For thread type:
P31:
Operating
temperature
-10°C to 65.5°C (14°F to 150°F)
P32/P33:
-25°C to 65.5°C (-13°F to 150°F)
Max. supply pressure
10 bar (150 psig)
Port size
BSPP / BSPT / NPT
Weight
P31:
0.30 kg (0.66 lbs)
1/4, 3/8, 1/2, 3/4
P32:
0.34 kg (0.74 lbs)
P33:
0.41 kg (0.90 lbs)
BBPP 1
BSPT 2
NPT 3
Modular Ball Valves
Manifold Blocks
The Modular Ball Valves provide shut off line pressure with a non-sticking 90O turn handle to prevent
unauthorised adjustment. When the inlet pressure
is turned off the downstream air pressure vents
through the exhaust port. The padlock slide may be
assembled on either side. It is recommended that
this is assembled after mounting.
• Available in 1/4" or 3/4" threaded inlet /
outlet ports
• Two additional top and bottom auxilliary
ports standard
• Can be mounted anywhere in the FRL
system
• Includes one pipe plug
Note: This padlokc slide is a permanent assembly
and may not be removed later.
Model
type
P31
P32
P33
Port size
1/4"
3/8"
1/2"
1/2"
3/4"
For thread type:
Thread
type
NPT
NPT
NPT
NPT
Flow
dm³/s (scfm)
20 (42.4)
90 (190.7)
122 (258.5)
265 (561.5)
Flow from left to right
P31VA92LBNN
P32VA93LBNN
P32VA94LBNN
P33VA94LBNN
NPT
320 (678)
P33VA96LBNN
Model
type
P31
P32
P33
In/Out
Port szie
1/4"
1/2"
3/8"
For thread type:
BBPP 1
BSPT 2
NPT 3
Auxilliary
port size
top
1/4"
1/4"
1/4"
Auxilliary
port size
bottom
1/4"
1/2"
1/2"
Thread
type
Part Number
NPT
NPT
NPT
P31MA92022N
P32MA94024N
P33MA96024N
BBPP 1
BSPT 2
NPT 3
Specifications
Specifications
Operating temperature
-20°C to 80°C (-4°F to 176°F)
Operating temperature
17 bar (250 psig)
Port size
NPT
1/4, 3/8, 1/2, 3/4
Weight
P31:
0.19 kh (0.41 lbs)
P32:
0.47 kg (1.00 lbs)
P33:
0.80 kg (1.70 lbs)
-14°C to 65.5°C (-40°F to 150°F)
Weight
16
27.07 bar (300 psig)
P31:
0.19 kg (0.26 lbs)
P33:
0.34 kg (0.42 lbs)
= Wainbee stock
Global Air Preparation System - Accessories
P31 Series Accessories
Descriptions
Part Number
C-Bracket (Fits to filter and lubricator body)
P31KA00MW
T-Bracket w/Body Connector
P31KA00MT
Body Connector
P31KA00CB
Port Block Kit - 1/8 NPT
P31KA91CP
P31KA92CP
P31KA93CP
Port Block Kit - G 1/8
P31KA11CP
P31KA12CP
P31KA13CP
Port Block Kit w/T-Bracket - 1/8 NPT
P31KA91CN
P31KA92CN
P31KA93CN
Port Block Kit w/T-Bracket - G 1/8 BSPP
P31KA11CN
P31KA12CN
P31KA12CN
Angle Bracket (Fits to regulator and filter/regulator body)
P31KA00MR
Note: BSPT port block kits also available
P32 & P33 Series Accessories
Descriptions
P32 Part Number
P33 Part Number
T-Bracket w/Body Connector
P32KA00MT
P32KA00MT
Body Connector
P32KA00CB
P32KA00CB
P32KA92CP
P32KA92CP
P32KA93CP
P32KA93CP
P32KA94CP
P32KA94CP
P32KA96CP
P32KA96CP
Port Block Kit - G 1/4 BSPP
P32KA12CP
P32KA12CP
P32KA13CP
P32KA13CP
P32KA14CP
P32KA14CP
P32KA16CP
P32KA16CP
Angle Bracket (Fits to regulators and filter/regulator bonnet)
P32KA00MR
P33KA00MR
L-Bracket (Fits to filter and lubricator body)
P32KA00ML
P33KA00ML
T-Bracket (Fits to body connector or port block)
P32KA00MB
P32KA00MB
17
= Wainbee stock
Global Air Preparation System - Kits
Description
Series
Part Number
Panel Mount Nut (Plastic)
P31
P31KA00MP
P32
P32KA00MP
P33
P33KA00MP
P31
P31KA00MM
P32
P32KA00MM
P33
P33KA00MM
P31
P31KA00ESE
P32
P32KA00ESE
P33
P33KA00ESE
P31
P31KA00ES9
P32
P32KA00ES9
P33
P33KA00ES9
P31
P31KA00ESC
P32
P32KA00ESC
P33
P33KA00ESC
P31
P31KA00ESA
P32
P32KA00ESA
P33
P33KA00ESA
Panel Mount Nut (Aluminum)
5µ Element Kit
1µ Element Kit
0.01µ Element Kit
Adsorber Element Kit
Auto Drain Kit
P32 / P33
P32KA00DA
Differential Pressure Indicator Kit
P32 /P33
P32KA00RQ
Fill Plug Kit
P31
P31KA00PL
P32 / P33
P32KA00PL
P31 / P32 / P33
P32KA00PG
Drip Control Assembly Kit
P31
P31KA00BGM
P32
P32KA00BGM
P33
P33KA00BGM
Plastic Bowl w/Bowl Guard & Pulse Drain
P31
P31KA00BGB
Plastic Bowl w/Bowl Guard & Auto Drain
P32
P32KA00BGA
P33
P33KA00BGA
P31
P31KA00BMM
P32
P32KA00BMM
P33
P33KA00BMM
P31
P31KA02CY
P32 / P33
P32KA04CY
Plastic Bowl w/Bowl Guard & Manual Drain
Metal Bowl w/o Sight Gauge & Manual Drain
Body Connector O-ring (Spares kit, pack of 4)
18
= Wainbee stock
Global Air Preparation System - Kits
Description
Metal Bowl w/o Sigh Gauge & Pulse Drain
Series
P31
Part Number
P31KA00BMB
Metal Bowl w/o Sight Gauge & Auto Drain
P32
P33
P32KA00BMA
P33KA00BMA
Metal Bowl w/Sight Gauge & Manual Drain
P32
P33
P32KA00BSM
P33KA00BSM
Metal Bowl w/Sight Gauge & Auto Drain
P32
P33
P32KA00BSA
P33KA00BSA
Lubricator - Plastic Bowl w/Bowl Guard No Drain
P31
P32
P33
P31KA00BGN
P32KA00BGN
P33KA00BGN
Regulator - Relieving Repair Kit
P31
P32
P33
P31KA00RB
P32KA00RB
P33KA00RB
Regulator - Non Relieving Repair Kit
P31
P32
P33
P31KA00RC
P32KA00RC
P33KA00RC
Regulator - Main Adjusting Spring 0-2 bar (0-30 psig) Kit
P31
P32
P33
P31KA00PR
P32KA00PR
P33KA00PR
Regulator - Main Adjusting Spring 0-4.1 bar (0-60 psig) Kit
P31
P32
P33
P31KA00PS
P32KA00PS
P33KA00PS
Regulator - Main Adjusting Spring 0-8.6 bar (0-125 psig) Kit
P31
P32
P33
P31KA00PT
P32KA00PT
P33KA00PT
Regulator - Main Adjusting Spring 0-17 bar (0-250 psig) Kit
P32
P33
P32KA00PV
P33KA00PV
Square Flush Mounting Gauge Kit
0-4 bar
0-10 bar
0-60 psig
0-150 psig
P31
K4511SCR04B
K4511SCR11B
K4511SCR060
K4511SCR150
1-1/4" Round Gauge
0-60 psig / 0-4.1 bar 1/8"
0-160 psig / 0-10 bar 1/8"
P31
K4513N18060
K4513N18160
40mm Round Gauge
0-30 psig / 0-2 bar 1/8"
0-60 psig / 0-4.1 bar 1/8"
0-160 psig / 0-10 bar 1/8"
P31
K4515N18030
K4515N18060
K4515N18160
50mm Round Gauge
0-30 psig / 0-2 bar 1/4"
0-60 psig / 0-4.1 bar 1/4"
0-160 psig / 0-10 bar 1/4"
0-300 psig / 0-20 bar 1/4"
P32 / P33
K4520N14030
K4520N14060
K4520N14160
K4520N14300
19
= Wainbee stock
Air Line Accessories
LV Series Valves
Operating Pressure Range
0 to 300 PSIG (0 to 2068 kPa)
Port size
inlet & outlet (port 1 & 2)
Operating Temperature Range (Ambient)
32°F to 175°F (0 to 80°C)
12
3
2
1
10
Port size
exhaust (port 3)
Part No.
3/8
3/4
LV3N6B
1/2
3/4
LV4N6B
3/4
3/4
LV6N6B
3/4
1-1/4
LV6NAB
1
1-1/4
LV8NAB
1-1/4
1-1/4
LVANAB
Silencers sold separately
Micrometer Flow Control Valves
"337" Series 1/8" to 3" Port
"337" Series ¹⁄₈" to ¾" Ports
The "337" Series flow control valves are manufactured with
a fine tapered needle providing precise flow control, even at
low flow rates. The perimeter of the adjustment knob features
numerical micrometer position markings providing a visual indication of the setting. Once the desired flow is selected, a set
screw can be tightened to maintain the setting.
These valves are available with NPTF ports in 1/8", 1/4", 3/8",
1/2" and 3/4" sizes. This series is recommended for pneumatic
service.
Component Materials
Body Material: Brass
Needle: Stainless steel
Check Seal: Urethane
Needle Seals: Buna N
(Viton optional)
Port Size
Model
Knob: Aluminum
Spring: Stainless steel
Retainer: Zinc-plated steel
Set Screw: Steel
Valve Specifications
Maximum Operating Pressure
250 PSI (1725 kPa)
Cracking pressure for return check poppet –
1 to 2 PSIG (7 to 14 kPa)
Flow (SCFM†)
Adj.
Free Flow
¹⁄₈" NPT
00337 1000
15
32
¹⁄₄" NPT
00337 1001
28
75
³⁄₈" NPT
00337 1002
59
139
¹⁄₂" NPT
00337 1003
126
183
³⁄₄" NPT
00337 1004
140
327
Standard: 0° to 180°F (-18° to 82°C)
Extended temperature: 0° to 300°F (-18° to 150°C)
(consult factory)
* Ambient temperatures below freezing require moisture-free air. Ambient temperatures below freezing and above 180°F require lubricants especially selected
for suitability at these temperatures. Pneumatic valves should be used with filtered
and lubricated air.
† At 100 PSIG (690 kPa) inlet pressure with full pressure drop.
20
= Wainbee stock
Needle Valves
"338" Series 1/8" to 3/4" Port
The "338" Series needle valves bi-directionally meter the flow of
air through the valve.
This series features a fine tapered needle providing precise flow
of air in both directions. Numerical micrometer position markings
are stamped on the perimeter of the adjustment knob which provide a visual indication of the setting. Once the desired flow is
selected, a set screw can be tightened to maintain the setting.
service.
Component Materials
Internal Components: Stainless steel
Seals: Nitrile (Viton® optional)
Port Size
250 PSIG (1725 kPa)
Model
Flow† (SCFM)
¹⁄₈" NPT
00338 1100
15
¹⁄₄" NPT
00338 1101
28
³⁄₈" NPT
00338 1102
59
Standard: 0° to 180°F (-18° to 82°C)
¹⁄₂" NPT
00338 1103
126
Extended Temperature: 0° to 300°F (-18° to 150°C) optional
³⁄₄" NPT
00338 1104
140
* Ambient temperatures below freezing require moisture-free air. Ambient temperatures below freezing and above 180°F require lubricants especially selected
for suitability at these temperatures. Pneumatic valves should be used with filtered
and lubricated air.
Needle Valves
"339" Series 1/8" to 3/4" Port
"339" Series check valves allow free flow in one direction and
provide positive checked (zero flow) in the reverse direction.
service.
Port Size
Model
Flow† (SCFM)
¹⁄₈" NPT
00339 3000
35
¹⁄₄" NPT
00339 3001
75
³⁄₈" NPT
00339 3002
143
¹⁄₂" NPT
00339 3003
162
³⁄₄" NPT
00339 3004
323
250 PSIG (1725 kPa)
Cracking pressure: 1 to 2 PSIG (7 to 14 kPa)
Standard: 0° to 180°F (-18° to 80°C)
Extended Temperature: 0° to 300°F (-18° to 150°C)
Component Materials
Internal Components: Brass / Stainless steel / Zinc-plated steel
Seals: U
rethane (standard),
Viton® (optional)
21
= Wainbee stock
BSL Series - Sintered Bronze Muffler/Filters
Muffler/filters effectively reduce air exhaust noises to an
industry accepted level with minimum flow restriction. They
protect valves, impact wrenches, screwdrivers and other air
tools by preventing dirt and other foreign matter from entering
the system. Non-corrosive, they can be cleaned with many
common solvents.
Maximum Operating Pressure:
250 PSIG (1725 kPa) – air
Operating Temperature:
0° to 300°F (-18° to 150° C)
Pipe Thread
Model Number
¹⁄₈" NPT
BSL-N1
¹⁄₄" NPT
BSL-N2
³⁄₈" NPT
BSL-N3
¹⁄₂" NPT
BSL-N4
Breather Vents
These low silhouette versions of the muffler/filter are useful
where space is a problem and/or to prevent contamination. Use
for vacuum relief or pressure equalization in gear boxes, oil
tanks, reservoirs, etc. Non-corrosive.
Pipe Thread
0° to 300°F (-18° to 150° C)
NOTE: Breather vents should not be used as exhaust mufflers.
*
Ambient temperatures below freezing require moisture-free air. Ambient temperatures
below freezing and above 180°F require lubricants especially selected for suitability at these
temperatures. Pneumatic valves should be used with filtered and lubricated air.
Model Number
¹⁄₈" NPT
BSLM-N1
¹⁄₄" NPT
BSLM-N2
³⁄₈" NPT
BSLM-N3
¹⁄₂" NPT
BSLM-N4
ES Series Sillencer
This silencer is designed to give superior performance in noise
control with a minimum effect on air efficiency. "Trimline" design
allows location in the tightest places without extra plumbing
and fittings. Fits directly into the exhaust port of more than
90% of present commercial valves. Slotted body permits rapid
discharge of air without undesirable back pressure. Unique
nylon screen element resists dirt buildup or clogging.
A
D
NPT
Pipe Thread
0° to 300°F (-18° to 150° C)
Model Number
Dimensions (inch)
¹⁄₈" NPT
ES12MC
¹⁄₄" NPT
ES25MC
2.41
0.97
129
³⁄₈" NPT
ES37MC
3.06
1.38
219
¹⁄₂" NPT
ES50MC
3.19
1.38
549
³⁄₄" NPT
ES75MC
4.69
1.62
893
1" NPT
ES100MC
4.69
1.62
1013
1¹⁄₄" NPT
ES125MC
5.69
–
1486
1¹⁄₂" NPT
ES150MC
5.69
–
1580
22
D
0.68
Flow SCFM @ 100 PSIG
(700 kPa) inlet
A
2.31
115
= Wainbee stock
Shuttle Valves
3/8"
Ports
¹⁄₈"1/8"
toto³⁄₈"
Ports
1
Shuttle valves determine a single pneumatic output from
two separate inputs. If pressure is applied to both ports
simultaneously, the valve will select the port with the high
pressure.
2
3
Maximum Operatering Pressure:
200 PSIG Maximum (1725 kPa)
3 PSIG (20 kPa) Minimum: Differential pressure
Component Materials
0° to 160°F* (-18° to 70°C)
Body Material: Aluminum
Internal Components: Aluminum
Seals: Nitrile
*
Ambient temperatures below freezing require moisture-free air. Ambient temperatures
below freezing and above 180°F require lubricants especially selected for suitability at these
temperatures. Pneumatic valves should be used with filtered and lubricated air.
Port Size
Model Number
Flow (Cv)
¹⁄₈" NPT
N164 1001
0.32
¹⁄₄" NPT
N164 2003
1.65
³⁄₈" NPT
N164 3003
2.02
"OR" Series
– ¹⁄₈"
thru
³⁄₄"
Ports
"OR" Series
- 1/8"
thru
3/4"
Ports
Quick Exhaust & Shuttle Valves
(in)
Quick exhaust valves provide rapid exhaust of control air when
placed between control valve and actuator. They can also be used
as shuttle valves. Diaphragm materials are available in urethane,
Nitrile, fluorocarbon, and PTFE to meet a wide variety of operating
conditions.
1
2
3
(exhaust)
(cylinder)
Operating Pressure (Air)
Component Materials
Maximum:150 PSIG (1000 kPa)
Body Material: Die cast aluminum
Seals: Nitrile with urethane
Diaphragm: Standard – Urethane
Optional – V
iton®, Teflon®,
or Nitrile (depending on size)
Urethane: 0° to 180°F* (-18° to 80°C)
Viton®:
0°F to 400°F(-18° to 200°C)
Teflon®:
0°F to 500°F(-18° to 260°C)
Minimum:3 PSIG (20 kPa)
Standard Urethane Diaphragm
Note: This valve can be used as
1. Quick exhaust valve
2. Shuttle valve
3. Positive seal check valve
Flow
Port NPT
1
Please consult Wainbee (1-888-924-6233) for application
information.
2
3
*
Ambient temperatures below freezing require moisture-free air. Ambient
temperatures below freezing and above 180°F require lubricants especially
selected for suitability at these temperatures. Pneumatic valves should be used
with filtered and lubricated air.
Model Number
NPTF
OR12B
¹⁄₈"
¹⁄₈"
70
¹⁄₈"
¹⁄₄"
70
OR12NB
¹⁄₄"
¹⁄₄"
90
OR25B
¹⁄₄"
³⁄₈"
150
OR25NB
³⁄₈"
³⁄₈"
240
OR25PB
OR37B
¹⁄₈"
¹⁄₄"
(SCFM†)
³⁄₈"
³⁄₈"
³⁄₈"
240
¹⁄₂"
¹⁄₂"
¹⁄₂"
450
OR50B
³⁄₄"
³⁄₄"
³⁄₄"
550
OR75B
23
= Wainbee stock
Stainless Steel Cylinders
The following page contain only a small sampling of the vast number of items available from the full clippard product line. Please call
1-888-WAINBEE if you don't see what you need, or request your full
colour CLIPPARD catalogue.
NUMBERING SYSTEM
Stroke
In inches & fractions
of an inch
–
–

–

Mounting Type
Rod Type
Bore
Options
S - Stud
D - Double Ended Rod
05 - 5/16"
B - Bumpers
U - Universal
R - Rotating Rod
08 - 1/2"
V - Fluorocarbon Seals
C - Clevis
N - Non-rotating Rod
10 - 5/8"
C - Cushions (both ends)
F - Front Block
H - Hollow Rod
12 - 3/4"
M- Magnetic Piston for Position
Sensors
E - End Stud
14 - 7/8"
T - Trunnion
17 - 1-1/16"
Cylinder Type
20 - 1-1/4"
D - Double Acting
24 - 1-1/2"
S - Single Acting
28 - 1-3/4"
R - Reverse Acting
32 - 2"
F - Front Spring Bias
40 - 2-1/2"
B - Back Spring Bias
48 - 3"
Cylinders Mounting Accessories
F - Cushion Front End (only)
R - Cushion Rear End (only)
W - Rod Wiper
S - Side Ported
H - Heavy Spring
P - Rotated Ports
N - No Threads
Not all combinations are available - call 1-888-WAINBEE (924-6233)
FACTORS FOR QUICK FORCE CALCULATION
BORE SIZE
⁵⁄₁₆"
¹⁄₂"
⁵⁄₈"
³⁄₄"
⁷⁄₈"
1¹⁄₁₆"
1¹⁄₄"
1¹⁄₂"
1³⁄₄"
2"
2¹⁄₂"
3"
FORCE FACTOR
(extend)
0.07
0.19
0.31
0.44
0.60
0.88
1.20
1.70
2.40
3.10
4.90
7.0
STANDARD* SPRING FORCES (lbs.)
FORCE FACTOR
(retract)
0.06
0.16
0.28
0.39
0.55
0.80
1.09
1.55
2.20
2.90
4.59
6.56
BORE
⁵⁄₁₆"
¹⁄₂"
⁵⁄₈"
³⁄₄"
⁷⁄₈"
1¹⁄₁₆"
1¹⁄₄"
1¹⁄₂"
1³⁄₄"
2"
2¹⁄₂"
* Heavy spring forces available.
Example:
³⁄₄" bore cylinder at 100 PSIG:
Force to extend: 0.44 x 100 = 44 lb.
AT REST
0.5
0.9
1.3
3.0
3.0
2.0
4.5
4.5
11.0
15.0
15.0
24
COMPRESSED
1
2
4
6
6
7
10
10
24
30
30
= Wainbee stock
Clippard Stainless Steel Cylinders
NOTE: Wainbee has selected these cylinder items as
stock due to current market conditions, but we reserve
the right to discontinue individual models based upon
future market demands.
Non-Magnetic Piston Inventory
Product Number
Description
Stroke Availability from Stock
SDR-05-STROKE
5/16” bore, stud mount, rotating rod, double acting
¹₂"
1"
1¹₂"
2"
3"
4"





5"
6"
8"
10"
12"



SSR-05-STROKE
5/16” bore, stud mount, rotating rod, single acting

UDR-05-STROKE
5/16” bore, universal mount, rotating rod, double acting

USR-05-STROKE
5/16” bore, universal mount, rotating rod, single spring retract acting
SDR-08-STROKE
SSN-08-STROKE
1/2” bore, stud mount, non-rotating rod, single acting

SSR-08-STROKE

USR-08-STROKE
UDR-08-STROKE
UDR-10-STROKE
SDR-12-STROKE



SRR-12-STROKE









SSN-12-STROKE
3/4” bore, stud mount, non-rotating rod, single acting



SSR-12-STROKE




UDR-12-STROKE


USR-12-STROKE


SDR-17-STROKE
1-1/16” bore, stud mount, rotating rod, double acting


SRR-17-STROKE
1-1/16” bore, stud mount, rotating rod, single acting
SSN-17-STROKE
1-1/16” bore, stud mount, non-rotating rod, single acting
SSR-17-STROKE




UDR-17-STROKE
1-1/16” bore, universal mount, rotating rod, double acting



URR-17-STROKE
1-1/16” bore, universal mount, rotating rod, single spring extend acting





















USR-17-STROKE
1-1/6” bore, universal mount, rotating rod, single spring retract acting


SDR-20-STROKE


SSN-20-STROKE
1-1/4” bore, stud mount, non-rotating rod, single acting

SSR-20-STROKE
UDR-20-STROKE
1-1/4” bore, universal mount, rotating rod, double acting

URR-20-STROKE
1-1/4” bore, universal mount, rotating rod, single spring extend acting

CDR-24-STROKE
1-1/2” bore, clevis mount, non-rotating rod, double acting

CSR-24-STROKE
1-1/2” bore, clevis mount, rotating rod, double acting
SDR-24-STROKE



SSR-24-STROKE




SDR-32-STROKE
2” bore, stud mount, rotating rod, double acting



UDR-32-STROKE
2” bore, universal mount, rotating rod, double acting

UDR-40-STROKE
3” bore, universal mount, rotating rod, double acting

Part Number
Description
Part Number
Description
CB-0595
clevis mtg bracket, 5/16” bore
N07-20
7/16-20 hex nut
CB-0895
clevis mtg bracket, 1/2” & 5/8” bore
N08-20
1/2-20 hex nut
CB-1795
clevis mtg bracket, 3/4” & 1-1/16” bore
N10-18
5/8-18 hex nut
CB-2095
clevis mtg bracket, 1-1/4” bore
N12-16
3/4-16 hex nut
CB-2495
clevis mtg bracket, 1-1/2” bore
N22-12
1-3/8-12 hex nut
CB-3295
clevis mtg bracket, 2” & 2-1/2” bore
RC-0581
rod clevis assembly, 5/16” bore
FB-0592
foot mtg bracket, 5/16” bore
RC-0881
rod clevis assembly, 1/2” & 5/8” bore
FB-0891
foot mtg bracket, 1/2” & 5/8” bore
RC-1281
rod clevis assembly, 3/4” bore
FB-1291
foot mtg bracket, 3/4” bore
RC-1781
rod clevis assembly, 1-1/6” bore
FB-1791
foot mtg bracket, 3/4”, 7/8” & 1-1/16” bore
RC-2081
FB-2491
foot mtg bracket, 1-1/4” & 1-1/2” bore
RC-2481
FB-3291
foot mtg bracket, 2” & 2-1/2” bore
RC-3281
rod clevis assembly, 1-3/4”, 2” & 2-1/2” bore































Mounting Accessories
25
= Wainbee stock
Miniature 2-Way Brass Control Valves
MAV-2
Part No.
MAV-2P
MJV-2
MTV-2
TV-2S
Description
Normally closed 2-way
miniature poppet valve
#10-32
miniature poppet valve,
¹⁄₈" NPT inlet
Minimatic® J-Series
poppet valve, ¹⁄₈" NPT
Two position Poppet
valve, #10-32,
NP brass toggle
Two position Spool valve,
#10-32,
NP brass toggle
Medium
air, water, or oil
air, water, or oil
air, water, or oil
air, water, or oil
air, water, or oil
Stem Travel
1/8"
1/8"
1/8"
50°
60°
Input Pressure
300 PSIG max.
300 PSIG max.
300 PSIG max.
150 PSIG max.
150 max.
Air Flow
@50 PSIG - 4.0 SCFM
@100 PSIG - 6.8 SCFM
@50 PSIG - 4.0 SCFM
50 PSIG - 14 SCFM
@
@100 PSIG - 25 SCFM
@50 PSIG - 4.0 SCFM;
@50 PSIG - 4.5 SCFM;
Force for Full
Stem Travel
24 oz. nominal
24 oz. nominal
38 oz. nominal
12 oz. nominal
12 oz. nominal
Mounting
15/32-32 thread; nut and
lockwashers furnished
Ports
Inlet - 10-32
Outlet - 10-32
Inlet 1/8"
Outlet - 10-32
Inlet 1/8" NPT
Outlet - 1/8" NPT
Inlet - 10-32
Outlet - 10-32
Inlet - 10-32
Outlet - 10-32
Temp. Range
32° to 230°F
32° to 230°F
32° to 230°F
32° to 230°F
32° to 230°F
MAV-3
Part No.
MAV-3R
Description
Normally closed 3-way poppet valve, #10-32
Normally closed 3-way poppet valve, #10-32 with rotatable inlet
Medium
air
air
Stem Travel
1/8"
1/8"
Input Pressure
300 PSIG max.
300 PSIG max.
Air Flow
@50 PSIG - 4.0 SCFM
@50 PSIG - 4.0 SCFM
Force for Full
Stem Travel
24 oz. nominal
24 oz. nominal
Mounting
15/32-32 thread; nut and lockwashers furnished
15/32-32 thread; nut and lockwashers furnished
Ports
Inlet - 10-32, Outlet - 10-32
Inlet 10-32, Outlet - 10-32
Temp. Range
32° to 230°F
32° to 230°F
26
= Wainbee stock
MAVO-3
Part No.
MJV-3
MJV-3C
MJVO-3
MJVO-3C
Description
Normally open 3-way
spool valve, #10-32
poppet valve, 1/8" NPT
poppet cartridge valve
Normally open 3-way
spool valve 1/8" NPT
Normally open 3-way
poppet cartridge valve
Medium
air
air
air
air
air
Stem Travel
1/8"
1/8"
1/8"
1/8"
1/8"
Input Pressure
150 PSIG max.
300 PSIG max.
300 PSIG max.
150 PSIG max.
300 PSIG max.
Air Flow
@50 PSIG - 6 SCFM,
@100 PSIG - 10 SCFM
@50 PSIG - 14 SCFM
@100 PSIG - 25 SCFM
@50 PSIG - 11 SCFM,
@100 PSIG - 22 SCFM
@50 PSIG - 14 SCFM
@100 PSIG - 25 SCFM
@50 PSIG - 11 SCFM
@100 PSIG - 22 SCFM
Force for Full
Stem Travel
32 oz. nominal
38 oz. nominal
32 oz. nominal
32 oz. nominal
32 oz. nominal
Mounting
Inserts into 5/8" bore
(06.25 ± 0.001")
Inserts into 5/8" bore
(06.25 ± 0.001")
Ports
Inlet - 10-32
Outlet - 10-32
Inlet - 1/8" NPT
Outlet - 1/8" NPT
Temp. Range
32° to 230°F
32° to 230°F
MTV-3
Part No.
Inlet 1/8" NPT
Outlet - 1/8" NPT
32° to 230°F
MTV-3P
32° to 230°F
MJTV-3
32° to 230°F
MLV-3
TV-3S, TV-3SF
Description
3-way, two position
poppet valve, #10-32
NP brass toggle
3-way, two position
NP brass toggle
3-way, two position
Normally closed miniature
limit valve
3-way, two position
spool valve
TV-3S: NP steel toggle
TV-3SF: Plastic toggle
Medium
air, water, or oil
air, water, or oil
air, water, or oil
air
air
Stem Travel
50°
50°
50°
1/8"
60°
Input Pressure
150 PSIG max.
150 PSIG max.
300 PSIG max.
150 PSIG max
150 PSIG max.
Air Flow
@50 PSIG - 4 SCFM
@100 PSIG - 7 SCFM
@50 PSIG - 4.0 SCFM
@50 PSIG - 14 SCFM
@100 PSIG - 25 SCFM
@50 PSIG - 4 SCFM
@100 PSIG - 7 SCFM
@50 PSIG - 4.5 SCFM
Force for Full
Stem Travel
16 oz. nominal
16 oz. nominal
16 oz. nominal
48 oz. nominal
12 oz. nominal
Mounting
Dual #20 holes or 15/32-32
thread; nut and lockwasher
furnish
1
Ports
Inlet - 10-32
Outlet - 10-32
Inlet - 1/8" NPT
Outlet - 10-32
Inlet - 1/8" NPT
Outlet - 1/8" NPT
Inlet - 10-32
Outlet - 10-32
Inlet - 10-32
Outlet - 10-32
Temp. Range
32° to 230°F
32° to 230°F
32° to 230°F
32° to 230°F
32° to 230°F
27
= Wainbee stock
SLV-3
Part No.
FTV-3
FTV-3P
FV-3
FV-3P
Description
3-way, two position
sleeve valve
3-way spool toggle
actuated two position
valve, #10-32
3-way spool toggle
actuated two position
valve, 1/8" NPT
3-way spool plunger
actuated spring return
valve, #10-32
3-way spool plunger
valve, 1/8" NPT
Medium
air
air
air
air
air
Stem Travel
1/8"
60°
60°
1/8"
1/8"
Input Pressure
150 PSIG max.
Vacuum to 150 PSIG max.
Air Flow
@50 PSIG - 6.5 SCFM
@100 PSIG - 11.8 SCFM
50 PSIG - 6 SCFM
@
@100 PSIG - 10 SCFM
@50 PSIG - 6.5 SCFM
@100 PSIG - 10.5 SCFM
@50 PSIG - 6 SCFM
@100 PSIG - 10 SCFM
@50 PSIG - 6.5 SCFM
@100 PSIG - 10.5 SCFM
Force for Full
Stem Travel
Force to actuate:
approx. 2.5 lbs.
16 oz. nominal
16 oz. nominal
4-1/2 lb. nominal
4-1/2 lb. nominal
Mounting
Inline or direct fitting
Ports
Inlet - 10-32
Outlet - 10-32
Inlet - 10-32
Outlet - 10-32
Exhaust - 10-32
Inlet - 1/8" NPT
Outlet - 1/8" NPT,
Exhaust - 1/8" NPT
Inlet - 10-32
Outlet - 10-32
Exhaust - 10-32
Inlet - 1/8" NPT
Outlet - 1/8" NPT
Exhaust - 1/8" NPT
Temp. Range
32° to 230°F
32° to 230°F
32° to 230°F
32° to 230°F
32° to 230°F
MAV-4
Part No.
MAV-4D
MJV-4
MTV-4, MTV-4F
MTV-5
Description
4-way, two position
spool valve, spring return,
#10-32
4-way, two position
spool valve,
double acting, #10-32
4-way, two position
spool valve, spring return,
1/8" NPT
4-way, two position
spool valve
MTV-4: NP Steel toggle
MTV-4F: Plastic toggle
2 Position Fully-Ported
spool valve
NP steel toggle
Medium
air
air
air
air
air
Stem Travel
1/8"
1/8"
1/8"
60°
60°
Input Pressure
150 PSIG max.
150 PSIG max.
150 PSIG max.
150 PSIG max.
150 PSIG max.
Air Flow
@50 PSIG - 5.0 SCFM
@50 PSIG - 5.0 SCFM
@50 PSIG - 8 SCFM
@100 PSIG - 14 SCFM
@50 PSIG - 6 SCFM
@100 PSIG - 10 SCFM
@50 PSIG - 6 SCFM
@100 PSIG - 10 SCFM
Force for Full
Stem Travel
38 oz. nominal
12 oz. nominal
38 oz. nominal
12 oz. nominal
16 oz. nominal
Mounting
lockwashers furnished.
Ports
Inlet - 10-32
Outlet - 10-32
Inlet - 10-32
Outlet - 10-32
Inlet - 1/8" NPT
Outlet - 1/8" NPT
Inlet - 10-32
Outlet - 10-32
Inlet 10-32
Outlet - 10-32
Exhaust - 10-32
Temp. Range
32° to 230°F
32° to 230°F
32° to 230°F
32° to 230°F
32° to 230°F
28
= Wainbee stock
Miniature 4-Way Brass Toggle Valves
MJTV-4
Part No.
MJTV-5
TV-4D
TV-4DP
TV-4MP
Description
4-way, two position
spool valve
steel toggle
4-way, two position
fully ported spool valve
steel toggle
4-way, three position
toggle valve
detented, #10-32
toggle valve
1/8" NPT, detented
toggle valve, 1/8" NPT
momentary
Medium
air
air
air
air
air
Arc of Travel
60°
60°
35°
35°
35°
Input Pressure
150 PSIG max.
150 PSIG max.
150 PSIG max.
150 PSIG max.
150 PSIG max.
Air Flow
@50 PSIG - 6.5 SCFM
@100 PSIG - 10.5 SCFM
@50 PSIG - 6.5 SCFM,
@100 PSIG - 10.5 SCFM
Force for Full
Stem Travel
12 oz. nominal
16 oz. nominal
8 oz. nominal
8 oz. nominal
8 oz. nominal
Mounting
15/32 8-32 thread; nut and
Ports
Inlet - 1/8" NPT
Outlet - 1/8" NPT
Inlet - 1/8" NPT
Outlet - 1/8" NPT
Inlet - #10-32
Outlet - #10-32
Inlet - 1/8" NPT
Outlet - 1/8" NPT
Inlet - 1/8" NPT
Outlet - 1/8" NPT
Temp. Range
32° to 230°F
32° to 230°F
32° to 230°F
32° to 230°F
32° to 230°F
Miniature 4-Way Stem Valves
FV-4D
Part No.
FV-4DP
FV-4P
FV-5
FV-5P
Description
4-way, two position
double plunger valve
#10-32
4-way, two position
double plunger valve
1/8" NPT
4-way spool plunger
valve 1/8" NPT
4-way spool plunger
fully ported valve, #10-32
4-way spool plunger
fully ported valve, 1/8"
NPT
Medium
air
air
air
air, oil
air, oil
Stem Travel
1/8"
1/8"
1/8"
1/8"
1/8"
Input Pressure
150 PSIG max.
150 PSIG max.
150 PSIG max.
150 PSIG max.
150 PSIG max.
Air Flow
@50 PSIG - 6 SCFM
@100 PSIG - 10 SCFM
@50 PSIG - 6.5 SCFM
@100 PSIG - 10 SCFM
50 PSIG - 6.5 SCFM
@
@100 PSIG - 10 SCFM
@50 PSIG - 6 SCFM
@100 PSIG - 10 SCFM
@50 PSIG - 6.5 SCFM
@100 PSIG - 10.5 SCFM
Force for Full
Stem Travel
1-1/2 lb. nominal
1-1/2 lb. nominal
4-1/2 lb. nominal
4-1/2 lb. nominal
4-1/2 lb. nominal
Mounting
Ports
Inlet - 10-32
Outlet - 10-32
Inlet - 1/8" NPT
Outlet - 1/8" NPT
Inlet - 1/8" NPT
Outlet - 1/8" NPT
Inlet - 10-32
Outlet - 10-32
Exhaust - 10-32
Inlet - 1/8" NPT
Outlet - 1/8" NPT
Exhaust - 1/8" NPT
Temp. Range
32° to 230°F
32° to 230°F
32° to 230°F
32° to 230°F
32° to 230°F
29
= Wainbee stock
Miniature Control Valves
Flow Control Valves
Shuttle Valves
JFC-2A
Part No.
JFC-2B
Description
J-Series Shuttle Valve
Medium
air, water, or oil
Pressure to shift
1 PSIG
Input Pressure
300 PSIG max
Air Flow
@50 PSIG - 30 SCFM,
@100 PSIG - 50 SCFM
Inlet: 1/8" NPT male & 10-32
female
Outlet: 1/8" NPT female
Mounting
Direct or inline
Ports
1/8" NPT
32° to 230°F
Temp. Range
32° to 230°F
Description
1/8" NPT control Valves,
Knurled Knob, Meter out
1/8" NPT control Valves,
Knurled Knob, Meter in
Medium
air, water, oil
air, water, oil
Input Pressure
150 PSIG max
150 PSIG max
Air Flow
11 SCFM @ 100 PSIG
11 SCFM @ 100 PSIG
Mounting
Direct
Direct
Ports
Inlet: 1/8" NPT female
Outlet: 1/8" NPT male &
10-32 female
32° to 230°F
Temp. Range
Needle Valves
Pulse Valves
MNV-4K
Part No.
JSV-2PFF
Part No.
PV-1
Check Valves
PV-1P
MCV-1
MCV-1AB
Description
Adjustable control 3°
needle valves, #10-32
Miniature Pulse Valve
3-way N.O., #10-32
Miniature Pulse Valve
3-way N.O., 1/8" NPT
Miniature brass poppet
type check valve
Miniature Brass poppet
type check valve
Medium
air, water, or oil
air
air
air or hydraulic
air or hydraulic
Cracks at approx. 1/2 PSIG
Pressure to open
-
-
Input Pressure
300 PSIG max.
Air Flow
@100 PSIG - 0-5 SCFM
Mounting
Direct
1/8" NPT thread; nut
furnished
Ports
Inlet - 10-32, Outlet - 10-32
Construction
Brass body; stainless steel
needle; Buna-N seal
Exhaust
Operation
Flow restriction in both
directions
Flow direction
Temp. Range
40 to 150 PSIG max.
300 PSIG max.
300 PSIG max.
@100 PSIG - 11.5 SCFM
@100 PSIG - 11.5 SCFM
1/8" NPT thread; nut
furnished
Direct or inline
Direct or inline
Inlet - 10-32 female & 1/8"
male, Outlet - 10-32 female
Inlet & Outlet - Combinations
10-32 female and 1/8" NPT
male
Inlet - 10-32 male
Outlet - 10-32 female
Inlet - 10-32 female
Outlet - 10-32 male
Body - brass, Seals Buna-N rubber, Spring
- stainless steel, Poppet
- Delrin®
Body - brass, Seals Buna-N rubber, Spring
- stainless steel, Poppet
- Delrin®
Body - brass, Seals Buna-N, Spring - stainless
steel
Body - brass, Seals Buna-N, Spring - stainless
steel
To atmosphere through hole
To atmosphere through
hole
onverts a continuous
C
supply of inlet air into a
pulse of approximately 100
milliseconds
Converts a continuous
supply of inlet air into a
pulse of approximately 100
milliseconds
Permits flow in one direction
only
Permits flow in one direction
only
Arrow on valve body
indicates direction of flow
Arrow on valve body
32° to 230°F
32° to 230°F
32° to 230°F
40 to 150 PSIG max.
32° to 230°F
32° to 230°F
30
= Wainbee stock
Miniature Control Valves
Check Valves
Pressure Regulators
MCV-2
Part No.
MJCV-1
MAR-1
Piston Valve
MAR-1P
MAR-1C
Description
Miniature check valve
"duckbill" type
Miniature poppet valve
type check valve
Adjustable self-relieving
pressure regulator
Adjustable self-relieving
pressure regulator
Plunger type pressure
regulator
Medium
air
air or hydraulic
air
air
air
Pressure to open
Crack: 1 PSIG
Fully Open: 2.5 PSIG
Fully Open: 2.5 PSIG
Input Pressure
100 PSIG max.
300 PSIG max.
Input: 300 PSIG max.
Regulating pressure: 0-100
PSIG
PSIG
PSIG
Air Flow
@50 PSIG - 1 SCFM
@50 PSIG - 20 SCFM,
@100 PSIG - 36 SCFM
@50 PSIG - 3 SCFM,
@100 PSIG - 5 SCFM
@50 PSIG - 3 SCFM,
@100 PSIG - 5 SCFM
@50 PSIG - 3 SCFM,
@100 PSIG - 5 SCFM
Mounting
Direct or inline
Direct or inline
Ports
Inlet - 10-32
Outlet - 10-32
Inlet - 1/8" NPT
Outlet - 1/8" NPT
Inlet - 10-32
Outlet - 10-32
Inlet - 1/8" NPT
Outlet - 10-32
Inlet - 10-32
Outlet - 10-32
Flow direction
Arrow on valve body
Arrow on valve body
Temp. Range
32° to 230°F
32° to 230°F
32° to 230°F
32° to 230°F
32° to 230°F
Miniature Valves Actuators
11925
Part No.
12296
11916-1
11916-2
Description
Roller cam follower actuator
Roller, double-pivoted one way
cam follower actuator
Round solid brass ⁵⁄₈" dia. push
button, 1/8" stem
Round solid brass ⁵⁄₈" dia. push
button, 3/16" stem
Construction/
Use
Stainless steel with nylon roller
Stainless steel with nylon roller
ounts directly on valve stem
M
for manual operation of valve;
prevents overtravel of valve stem
by providing a positive stop
Mounts directly on valve stem
for manual operation of valve;
prevents overtravel of valve stem by
providing a positive stop
Temperature
32° to 230° F
32° to 230° F
32° to 230° F
32° to 230° F
Mounting
31/64" dia. mounting hole fits
15/32-32 threaded mounting section of valve bodies
31/64" dia. mounting hole fits
15/32-32 threaded mounting section of valve bodies
1/8" dia. mounting hole fits valve
stems; locks in place by set screw
(Allen wrench furnished)
3/16" dia. mounting hole fits valve
stems; locks in place by set screw
(Allen wrench furnished)
Operation
Mounts to valve body, actuates valve when mechanically
depressed; valve spring provides
return
Mounts to valve body, actuates
valve when depressed by activating
cam or linear travel device in one
direction only; no actuation on
return travel
Note: Individually packaged or bulk quanities available
31
= Wainbee stock
Miniature Valves Actuators
MPA-3
MPA-3P
Part No.
MPA-5
MPA-5P
MPA-7
MBA-1
MPA-10
MVA-10
Description
Single acting spring
return miniature air
pilot actuator
pilot actuator
pilot actuator
Ball cam actuator
permits the valves and
electrical switch to be
operated by mechanical
movement depressing the
ball from any direction
Single acting pilot,
spring return
actuator
Single acting,
spring vacuum
actuator
Mounting
15/32-32 female thread
to mount to Clippard
miniature valves and
components
15/32-32 female
thread to mount to
Clippard miniature
valves and components
15/32-32 female
thread to mount to
Clippard miniature
valves and components
15/32-32 female to
mount to Clippard
miniature valves and
electric switch
15/32-32 female
thread to mount to
Clippard Minimatic
valves & components
15/32-32 female
thread to mount to
Clippard Minimatic
valves & components
Temp. Range
32° to 230° F
32° to 230° F
32° to 230° F
32° to 230° F
Ports
(MPA-3) #10-32;
(MPA-3P) 1/8" NPT
(MPA-5) #10-32;
(MPA-5P) 1/8" NPT
1/8" NPT
Force Factor
0.1
0.3
0.6
1.2
Input Pressure
250 PSIG max.
250 PSIG max.
250 PSIG max.
150 PSIG max.
Bore Size
0.375"
0.625"
0.825"
1.250" dia.
Construction
Body - Brass
Springs - stainless
steel
Seals - Buna-N rubber
Piston - Delrin®
Body - brass
Springs - stainless
steel
Piston - Delrin®
Body - aluminum and
brass
Springs - stainless
steel
Piston - Delrin®
Operation
Body - brass
Ball - stainless steel
retained in
housing
Body - aluminum and
brass
Springs - stainless
steel
Piston - Delrin®
30 in. Hg vacuum
Body - aluminum and
brass
Springs - stainless
steel
Piston - Delrin®
Will actuate valve
while depressed from
any (360°) direction
Electric Switch - ES-1
Single Pole, Double Throw Snap-Action Electrical Switch
mounting holes
for #6 screw
0.656
0.406
COMMON
1
0.125 stroke
1.937
NORMALLY
OPEN
NORMALLY
CLOSED
0.250
0.468
0.562
0.906
1.562
Part No. : ES-1
0.687
0.781
15/32-32 thd.
Stem Travel:1/8"
Rating A.C.:
120 volts - 15 amps
240 volts - 15amps
480 volts - 15 amps
Rating D.C.:
125 volts - 0.5 amps
250 volts - 0.25 amps
Mounting: #15/32-32 thread; nut and lockwashers furnished,
also two 0.140" dia. mounting holes in body
Approvals: UL and CE
32
= Wainbee stock
Miniature Brass Fittings
Heavy Duty Limit Valves & Accessories
LVA-2
LVA-3
LVAO-2
LVAO-3
11752-1
2-way poppet normally closed heavy duty air limit valve
3-way poppet normally closed heavy duty air limit valve
.250
hex.
2-way poppet normally open heavy duty air limit valve
11752-2
10-32 to 1/16" ID Hose Fitting
.437
.052 dia.-thru
.250 hex.
11752-3
#10-32 thd.
.109 dia.-thru
.500
.156
10-32 thd.
.250 hex.
1/8 I.D. hose barb
11755
10-32 Screw Plug
#10-32 thd.
Adjustable roller arm
for Clippard heavy duty air limit valves
Arm: Aluminum base with steel extendable arm
Roller: Hardened steel
Adjustment: 1.0 to 3.5 in.
Temperature Range: 32° to 230°F
Mounting: Slotted mounting clamp tightens onto
limit valve with 5/32" hex wrench; may be
positioned on limit valve shaft in any direction
within a 360° circle.
.156
.250
hex.
.281
11999
AR-M
.125
1/16 I.D. hose barb
Roller actuator arm
#10-32 thd.
1/8 I.D. hose barb
.090 dia.-thru
Arm: Aluminum
Roller: Hardened steel
Mounting: S
lotted mounting clamp tightens onto
limit valve with 5/32" hex wrench; may be
AR-L
.156
.656
3-way poppet normally open heavy duty air limit valve
Medium: Air
Stem Travel: Actuator arm may move 50° in either direction
Input Pressure: 300 PSIG max.
Air Flow: @ 50 PSIG - 10 SCFM
@ 100 PSIG - 19 SCFM
Torque to Actuate: 3 in./lbs.
Actuation Range: 0-23° Off, 23-50° On,
Maximum travel 50°
Temperature Range: 32° to 230° F
Mounting: F
our 13/64" dia. mounting holes provided in
valve body for use with #10 screw, or for tapping 1/4-20 by customer.
Ports: Inlet - 1/8-27 NPT, Outlet - 1/8-27 NPT,
Exhaust - 1/8-27 NPT for convenience in porting
away exhaust air or attaching muffler; it should not
be restricted; exhaust port is not used on 2-ways.
AR-K
10-32 Male Connector
.250 hex.
Adjustable rod actuator
.156
.187
.156
Arm: Steel 1/8” rod 13 inches long retained by screw
clamp; the rod may be shortened and/or bent to
desired shape.
Mounting: S
lotted aluminum mounting clamp may be
.090 dia.-thru
#10-32 thd. typ.
33
= Wainbee stock
Miniature Adaptor Fittings & Hose
Miniature Brass Fittings
15002-1
15004
Adjustable "L" Fitting
10-32 Female Hex Coupling
.250
hex.
.468
.187
.312 hex.
.343
.156
.500
.187
#10-32 thd. typ.
.375
15002-2
#10-32 thd.-thru
2CPF
"L" Fitting
.250
15002-3
#10-32 thd.
1CJF
"T" Fitting
.250
.187
#10-32 thd.
#10-32 thd.
4CQF
"X" Fitting
.156
#10-32 thd.-thru
#10-32 thd.-typ
#10-32 thd.
Adjustable "T" Fitting
.468
.187
.156
.625
.312
#10-32
thd. typ.
.375
.562
.187
.250
.312 hex.
1/16-27 NPT
1/4" NPT to 10-32 Female Bushing
.562 hex.
.593
15002-6
NPT to 10-32 Female Bushing
.312 hex.
.156
15002-4
.375 sq.
1/8-27 NPT
.468
.593
#10-32 thd.-thru
.156
.156
#10-32 thd.-typ.
.375 sq.
.531
7/16 hex.
.593
.375 sq.
10-32 Female Hex Coupling
34
1/4-18 NPT
= Wainbee stock
Miniature Adaptor Fittings & Hose
4CQN
Miniature Fittings / mufflers / manifold
15070
1/4" NPT to 1/8" Female Bushing
#10-32 Muffler
#10-32 thd.
.562
.187
.562 hex.
.312 dia.
.156
.312 hex.
.812
15010
Nickel plated brass body sintered,
stainless steel muffler, 100 micron
1/4-18 NPT
1/8-27 NPT
15080
10-32 Extension Fitting
Muffler
1/8-27 NPT
.312 hex.
.781
.156
.250
.562 hex.
.437
#10-32 thd. typ.
Solid brass body, stainless steel
insert, 100 micron.
.093 dia.-thru
URH1-0804-X-X
0035-2
Polyurethane Hose 1/8" ID
Screw Plug
#10-32 thd.
.125
dia.
.250
dia.
Colors available:
Solid: black, brown, white, gray, orange
Translucent: clear, blue, green red, yellow
.125
Stainless steel screw plug
Sold by foot, 50 ft or 500 ft rolls
depending on colour
E.g.
URH1-0804-RDT-050
RDT = Red Translucent
050 = 50 ft roll
URH1-0402-X-X
MAN-12
12-Port Manifold
clearance hole
for #10 screw
#10-32 thd.-typ.
Polyurethane Hose 1/16" ID
1/8-27 NPT
.625
dia.
.187
.125
dia.
3/32
hex.
.500
.500
.500
.625
.562 hex.
2 7/8
.062 dia.
Machined from solid brass hex stock
Colors available:
Solid: black, brown, white, gray, orange
Translucent: clear, blue, green red, yellow
Sold by foot, 50 ft or 500 ft rolls
depending on colour
E.g.
URH1-0402-RDT-050
RDT = Red Translucent
050 = 50 ft roll
35
= Wainbee stock
Fittings
How to Order LF3000
Designation
Tube Outside Diameter
(O.D.)
Imperial
Thread Connection
Metric
Imperial
Metric
Additional Codes
Type
Description
Style
Code
Description
Code
Description
Code
Description
Code
Description
Code
3000
3008
3009
3014
3018
3036
3049
3101
3102
3103
3104
3106
3107
3108
3109
3110
3112
3113
3114
3116
3118
3120
3121
3122
3126
3129
3131
3132
3133
3136
3139
3140
3142
3143
3144
3146
3148
3149
3156
3158
3159
3166
3168
3169
3171
3175
3180
3181
3182
3183
3184
3188
3192
3193
3198
3199
3304
3305
3306
3310
3315
3330
Disconnection Tool
Female Branch Tee
Female Elbow-Imperial
Straight Female Connector-Imperial
Banjo
Female Bulkhead Connector-Imperial
Twin Banjo
Male Connector
Union Elbow
Male Run Tee-Imperial
Tee
Union
Cross
Male Branch Tee
Male Elbow
Caps-manual release button
Double Y Male
45 Degree Male Elbow
Straight Female Connector-Metric
Bulkhead Union
Banjo
Double Male Union
Male Standpipe-Inch
Barbed Connector
Plug
Extended Male Elbow
Male Standpipe-Metric
Double Y Male
45 Degree Male Elbow
Female Bulkhead Connector-Metric
Bulkhead Elbow
Y Connector
Plug-in Y
Expander
Double Y Connector
Mixed Bulkhead Connector
Y Male-Imperial
Twin Banjo
Plug-in Bulkhead Connector
Y Male-Metric
Oscillating Compact Elbow
Reducer
Plug-in Multiple Y
Extended Male Elbow
Male Straight Connector
45 Degree Plug-in Elbow
Plug-in Elbow
Plug-in Run Tee
Extended Plug-in Elbow
Plug-in Tee
Female Elbow-Metric
Male Run Tee-Metric
Male Branch Tee
Male Elbow
Multiple Tee
Accessories
Threaded Fittings
Threaded Fittings
Threaded Fittings
Banjo
Bulkhead Connector Fittings
Banjo
Threaded Fittings
Tube to Tube
Threaded Fittings
Tube to Tube
Tube to Tube
Manifold Connections
Threaded
Threaded Fittings
Accessories
Threaded Fittings
Threaded Fittings
Threaded Fittings
Banjo
Plug-in Accessories
Threaded Fittings
Plug-in Accessories
Plug-in Accessories
Threaded Fittings
Threaded Fittings
Threaded Fittings
Threaded Fittings
Tube to Tube
Plug-in Accessories
Plug-in Accessories
Tube to Tube
Threaded Fittings
Banjo
Threaded Fittings
Threaded Fittings
Plug-in Accessories
Plug-in Accessories
Threaded Fittings
Threaded Fittings
Threaded Fittings
Plug-in Fittings
Threaded Fittings
Plug-in Fittings
Plug-in Fittings
Plug-in Fittings
Plug-in Fittings
Threaded Fittings
Threaded Fittings
Threaded Fittings
Threaded Fittings
Accessories
53
4
55
56
8
60
62
1/8" tube
5/32" tube
3/16" tube
1/4" tube
5/16" tube
3/8" tube
1/2" tube
3
4
5
6
8
10
12
14
16
3mm
4mm
5mm
6mm
8mm
10mm
12mm
14mm
16mm
8
11
14
18
22
1/16" NPT
1/8" NPT
1/4" NPT
3/8" NPT
1/2" NPT
10
13
17
21
1/8" BSP
1/4" BSP
3/8" BSP
1/2" BSP
20
10/32 UNFthread
9
19
55
M3 Thread
M5 Thread
M7 Thread
Monobloc manifold c/w threaded or LF3000 ports
Double Multiple Tee
Manifold c/w LF3000 Push to Connect ports-Metric
Manifold c/w LF3000 Push to Connect ports-Imperial
Caps-manual release button
Description
Part Number Identification
LF
For example
1/4" tube x 1/4"NPT
Designation
Tube Outside Diameter
Thread Connection
3155
56
14
Fittings, Valves, Tubing & Accessories
For Industrial & Transportation Applications
LF3000 - composite push-to-connect fittings
Composite fitting for pneumatic applications
Function Valves - flow regulators for pneumatic application
Compact, user-friendly and meet today's industrial needs perfectly
LF3200 - nickel plated brass push-to-connect fittings
Suitable for compressed air. The fitting is designed to perform in harsh or abusive environments
LF3600 - nickel plated brass with viton seal push-to-connect fittings
Maybe used with all liquid and gaseous fluids. All materials, seals and plating can come in contact with food
LF3800 - stainless steel push-to-connect fittings
Offers excellent resistance to aggressive environments and fluids
LF3800 - stainless steel push-to-connect fittings
Offers excellent resistance to aggressive environments and fluids
C900 - safety coupler
Used for any application where safety, durability and performance are demanded
DOT - composite push-to-connect fittings
Meets all applicable requirements of DOT FMVSS §571.106 specifications
Blowguns - standard, versatile, safety
Wide range of interchangeable nozzles. Progressive trigger action
Brass Pipe Fittings
Offers the maximum number of direct fitting alternatives with the minimum number of components
Silencers
Complete range of silencers
Threaded Plugs - brass, stainless steel
Large and diversified offering
Tubing - nylon, polyurethane
Comprehensive range suitable for most applications
Ball Valves - brass, stainless steel
Provides a reliable means of opening and closing fluid systems
Axial Valves
Compact, high performance and straightforward reliable installation
36
= Wainbee stock
Fittings
Tube to Tube Fittings
3106
ØD in
1/8
5/32
1/4
5/16
3/8
1/2
ØD mm
6
10
12
3102
3106
union - fractional inch
and metric tube to tube
ØD1 in
1/8
1/4
3/8
3/8
ØD1 mm
4
6
6
8
12
Part No.
3106 53 00
3106 04 00
3106 56 00
3106 08 00
3106 60 00
3106 62 00
Part No.
3106 06 00
3106 10 00
3106 12 00
3102
union elbow - fractional
inch and metric tube
to tube
ØD in
1/8
1/4
3/8
1/2
ØD mm
4
6
8
10
unequal union - fractional inch
Part No.
3106 53 56
3106 56 08
3106 60 56
3106 60 62
Part No.
3106 04 06
3016 06 08
3016 06 10
3016 08 10
3016 12 14
unequal union elbow - fractional
inch and metric tube to tube
ØD1 in
1/8
Part No.
3102 53 00
3102 56 00
3102 60 00
3102 62 00
Part No.
3102 04 00
3102 06 00
3102 08 00
3102 10 00
ØD2 in
1/4
5/16
1/4
1/2
ØD2 mm
6
8
10
10
14
ØD2 in
1/4
3104
tee - fractional inch
ØD in
1/8
5/32
1/4
3/8
1/2
ØD mm
6
8
10
12
3140
Part No.
3102 53 56
3104
Part No.
3104 53 00
3104 04 00
3104 56 00
3104 60 00
3104 62 00
Part No.
3104 06 00
3104 08 00
3104 10 00
3104 14 00
unequal tee - fractional in and
metric tube to tube
ØD1 in
ØD2 in
Part No.
5/32
1/4
3104 04 56
1/4
1/8
3104 56 53
1/4
5/32
3104 56 04
1/4
3/8
3104 56 60
1/2
1/4
3104 62 56
1/2
3/8
3104 62 60
ØD1 mm
ØD2 mm
Part No.
6
4
3104 06 04
"Y" - fractional inch
ØD in
Part No.
5/32
3140 04 00
1/4
3140 56 00
5/16
3140 08 00
3/8
3140 60 00
ØD mm Part No.
4
3140 04 00
6
3140 06 00
8
3140 08 00
Threaded Fittings
3014
3116
straight female connector - fractional inch tube to NPT
ØD in
1/8
1/8
5/32
5/32
1/4
1/4
3/8
3/8
3/8
1/2
3109
3109
NPT
1/8
1/4
1/8
1/4
1/8
1/4
1/8
1/4
3/8
3/8
Part No.
3014 53 11
3014 53 14
3014 04 11
3014 04 14
3014 56 11
3014 56 14
3014 60 11
3014 60 14
3014 60 18
3014 62 18
ØD in
1/4
5/16
3/8
1/2
ØD mm
4
6
8
10
12
3036
male elbow - fractional inch tube to NPT or UNF
ØD in
5/32
5/32
5/16
5/16
5/16
NPT
1/8
1/4
1/8
1/4
3/8
Part No.
3109 04 11
3109 04 14
3109 08 11
3109 08 14
3109 08 18
3156
BSPT
R1/8
R1/4
R1/8
R1/4
R1/8
R1/4
Part No.
3109 04 10
3109 04 13
3109 06 10
3109 06 13
3109 08 10
3109 08 13
Part No.
3116 56 00
3116 08 00
3116 60 00
3116 62 00
Part No.
3116 04 00
3116 06 00
3116 08 00
3116 10 00
3116 12 00
female bulkhead connector - fractional inch tube to NPT
ØD1 in
1/8
5/32
1/4
1/4
male elbow - metric tube to male BSPT
ØD mm
4
4
6
6
8
8
union - fractional inch and metric tube to tube
ØD2 in
1/8
1/8
1/8
1/4
Part No.
3036 53 11
3036 04 11
3036 56 11
3036 56 14
plug-in bulkhead union connector - fractional inch tube to tube
ØD1 in
1/4
3/8
Part No.
3156 56 00
3156 60 00
Note: Other combinations available. Please see "How to Order"
Legris Fittings - page 36 and contact Wainbee
Customer Service at 1-888-924-6233 for stock availability.
37
= Wainbee stock
Threaded Fittings
3113
3108
45° male elbow - metric tube to male
BSPT
3171
3181
male connector - fractional inch and
metric tube to UNF or M7
male connector - tube to NPT or BSPT
ØD mm
BSPT
Part No.
ØD in
UNF/M7
Part No.
ØD IN
NPT
Part No.
6
R1/8
3113 06 10
1/8
10-32
3171 53 20
1/8
1/8
3175 53 11
8
R1/8
3113 08 10
5/32
10-32
3171 04 20
1/8
1/4
3175 53 14
8
R3/8
3113 08 17
1/4
10-32
3171 56 20
5/32
1/8
3175 04 11
12
R1/4
3113 12 13
1/4
M7
3181 56 55
5/32
1/4
3175 04 14
3/16
1/8
3175 55 11
3/16
1/4
3175 55 14
1/4
1/8
3175 56 11
1/4
1/4
3175 56 14
1/4
3/8
3175 56 18
5/16
1/8
3175 08 11
5/16
1/4
3175 08 14
5/16
3/8
3175 08 18
3/8
1/8
3175 60 11
3/8
1/4
3175 60 14
3/8
3/8
3175 60 18
3/8
1/2
3175 60 22
1/2
1/4
3175 62 14
1/2
3/8
3175 62 18
1/2
1/2
3175 62 22
ØD mm
BSPT
Part No.
4
R1/8
3175 04 10
4
R1/4
3175 04 13
6
R1/8
3175 06 10
6
R1/4
3175 06 13
6
R3/8
3175 06 17
6
R1/2
3175 06 21
8
R1/8
3175 08 10
8
R1/4
3175 08 13
8
R3/8
3175 08 17
8
R1/2
3175 08 21
10
R1/4
3175 10 13
10
R3/8
3175 10 17
12
R3/8
3175 12 17
male branch tee - tube to NPT
3103
male run tee - fractional inch tube to tube
to male NPT
ØD in
NPT
Part No.
ØD in
NPT
Part No.
1/8
1/8
3108 53 11
5/32
1/8
3103 04 11
5/32
1/8
3108 04 11
1/4
1/8
3103 56 11
5/32
1/4
3108 04 14
1/4
1/4
3103 56 14
1/4
1/8
3108 56 11
5/16
1/4
3103 08 14
1/4
1/4
3108 56 14
3/8
1/4
3103 60 14
1/4
3/8
3108 56 18
3/8
3/8
3103 60 18
5/16
1/8
3108 08 11
5/16
1/4
3108 08 14
3/8
1/8
3108 60 11
3/8
1/4
3108 60 14
ØD in
NPT
Part No.
3/8
3/8
3108 60 18
1/4
1/8
3148 56 11
3/8
1/2
3108 60 22
1/4
1/4
3148 56 14
1/2
1/4
3108 62 14
3/8
1/4
3148 60 14
1/2
1/2
3108 62 22
3148
"Y" male - tube to NPT
Plug-in Accessories
3166
3175
reducer - fractional inch and metric
3126
plug - fractional inch and metric
ØD in
ØD2 in
Part No.
ØD in
Part No.
1/8
5/32
3166 53 04
1/8
3126 53 00
1/8
1/4
3166 53 56
5/32
3126 04 00
5/32
1/4
3166 04 56
3/16
3126 55 00
1/4
5/16
3166 56 08
1/4
3126 56 00
1/4
3/8
3166 56 60
5/16
3126 08 00
3/8
1/2
3166 60 62
3/8
3126 60 00
ØD1 mm
ØD2mm
Part No.
1/2
3126 62 00
4
6
3166 04 06
ØD mm
Part No.
4
8
3166 04 08
4
3126 04 00
4
10
3166 04 10
6
3126 06 00
6
8
3166 06 08
8
3126 08 00
6
10
3166 06 10
10
3126 10 00
6
14
3166 06 14
38
Note:
Other combinations available.
Please see "How to Order" Legris Fittings
on page 36 and contact Wainbee Customer
Service 1-888-924-6233 or
[email protected]
= Wainbee stock
Brass Body Push-in Tube Fittings
62PLPBH Bulkhead Union (brass)
Tube size (in.)
W68PLP Male Connector (brass)
Part No.
1/8
62PLPBH-2
5/32
62PLPBH-5/32
1/4
62PLPBH-4
5/16
62PLPBH-5
3/8
62PLPBH-6
1/2
62PLPBH-8
66PLP Female Connector (brass)
Tube size
(in.)
1/8
Pipe thread
(NPTF)
1/8
3/16
1/8
66PLP-3-2
5/32
1/8
66PLP-5/32-2
5/32
1/4
66PLP-5/32-4
1/4
1/8
66PLP-4-2
1/4
1/4
66PLP-4-4
5/16
1/8
66PLP-5-2
5/16
1/4
66PLP-5-4
3/8
1/4
66PLP-6-4
3/8
3/8
66PLP-6-6
Part No.
66PLP-2-2
Tube size
(in.)
1/8
Pipe thread
(NPTF)
1/16
1/8
1/8
1/8
1/4
3/16
1/8
3/16
1/4
5/32
1/16
5/32
1/8
5/32
1/4
1/4
1/16
1/4
1/8
1/4
1/4
1/4
3/8
5/16
1/8
5/16
1/4
5/16
3/8
3/8
1/8
3/8
1/4
3/8
3/8
3/8
1/2
1/2
1/4
1/2
3/8
1/2
1/2
5/32
1/4-28
Part No.
W68PLP-2-1
W68PLP-2-2
W68PLP-2-4
W68PLP-3-2
W68PLP-3-4
W68PLP-5/32-1
W68PLP-5/32-2
W68PLP-5/32-4
W68PLP-4-1
W68PLP-4-2
W68PLP-4-4
W68PLP-4-6
W68PLP-5-2
W68PLP-5-4
W68PLP-5-6
W68PLP-6-2
W68PLP-6-4
W68PLP-6-6
W68PLP-6-8
W68PLP-8-4
W68PLP-8-6
W68PLP-8-8
68PLP-5/32-4LT*
* SAE-LT Threads
66PLPBH Female Bulkhead (brass)
Tube size
(in.)
5/32
Pipe thread
(NPTF)
1/4
1/4
1/4
3/8
3/8
1/2
3/8
68PLP Male Connector 10-32 (brass)
Tube size
(in.)
1/8
Part No.
66PLPBH-5/32-4
66PLPBH-4-4
66PLPBH-6-6
66PLPBH-8-6
62PLP Union (brass)
Tube size (in.)
1/8
5/32
1/4
5/16
3/8
1/2
Part No.
62PLP-2
62PLP-5/32
62PLP-4
62PLP-5
62PLP-6
62PLP-8
39
Thread size
10-32
5/32
10-32
1/4
10-32
Part No.
68PLP-2-0
68PLP-5/32-0
68PLP-4-0
= Wainbee stock
Brass Body Push-in Tube Fittings
W169PLP Male Elbow Swivel (brass)
Tube size
(in.)
1/8
1/8
1/8
1/8
3/16
5/32
5/32
5/32
5/32
1/4
1/4
1/4
1/4
1/4
5/16
5/16
3/8
3/8
3/8
3/8
1/2
1/2
1/2
Pipe thread
(NPTF)
1/16
1/8
10-32
1/4
1/8
1/16
1/8
1/4
10-32
1/16
1/8
1/4
3/8
10-32
1/8
1/4
1/8
1/4
3/8
1/2
1/4
3/8
1/2
164PLP Union Tee (brass)
Tube size (in.)
Part No.
W169PLP-2-1
W169PLP-2-2
169PLP-2-0*
W169PLP-2-4
W169PLP-3-2
W169PLP-5/32-1
W169PLP-5/32-2
W169PLP-5/32-4
169PLP-5/32-0*
W169PLP-4-1
W169PLP-4-2
W169PLP-4-4
W169PLP-4-6
169PLP-4-0*
W169PLP-5-2
W169PLP-5-4
W169PLP-6-2
W169PLP-6-4
W169PLP-6-6
W169PLP-6-8
W169PLP-8-4
W169PLP-8-6
W169PLP-8-8
Tube size
(in.)
1/8
3/16
5/32
1/4
1/4
1/4
5/16
5/16
3/8
3/8
1/2
1/2
1/2
165PLP Union Elbow (brass)
Tube size
(in.)
1/8
5/32
1/4
1/4
1/4
5/16
5/16
3/8
3/8
1/2
1/2
Part No.
W169PLPNS Male Elbow 90° (brass)
Tube
size (in.)
1/8
5/32
5/32
1/4
1/4
5/16
5/16
3/8
3/8
3/8
1/2
1/2
5/32
Pipe thread
(NPTF)
1/8
1/8
1/4
1/8
1/4
1/8
1/4
1/4
3/8
1/2
3/8
1/2
1/4-28
Part No.
Part No.
W172PLP-2-2
W172PLP-3-2
W172PLP-5/32-2
W172PLP-4-2
W172PLP-4-4
W172PLP-4-6
W172PLP-5-2
W172PLP-5-4
W172PLP-6-4
W172PLP-6-6
W172PLP-8-4
W172PLP-8-6
W172PLP-8-8
Pipe thread
(NPTF)
1/8
1/8
1/8
1/4
3/8
1/8
1/4
1/4
3/8
3/8
1/2
Part No.
W171PLP-2-2
W171PLP-5/32-2
W171PLP-4-2
W171PLP-4-4
W171PLP-4-6
W171PLP-5-2
W171PLP-5-4
W171PLP-6-4
W171PLP-6-6
W171PLP-8-6
W171PLP-8-8
639PLP Plug
W169PLPNS-2-2
W169PLPNS5/32-2
W169PLPNS5/32-4
W169PLPNS-4-2
W169PLPNS-4-4
W169PLPNS-5-2
W169PLPNS-5-4
W169PLPNS-6-4
W169PLPNS-6-6
W169PLPNS-6-8
W169PLPNS-8-6
W169PLPNS-8-6
169PLPNS532-4LT*
Tube size (in.)
1/8
5/32
3/16
1/4
5/16
3/8
1/2
* SAE-LT Threads
Pipe thread
(NPTF)
1/8
1/8
1/8
1/8
1/4
3/8
1/8
1/4
1/4
3/8
1/4
3/8
1/2
W171PLP Male Run Tee Swivel (brass)
165PLP-2
165PLP-5/32
165PLP-3
165PLP-4
165PLP-5
165PLP-6
165PLP-8
1/8
5/32
3/16
1/4
5/16
3/8
1/2
164PLP-2
164PLP-3
164PLP-5/32
164PLP-4
164PLP-5
164PLP-6
164PLP-8
W172PLP Male Branch Tee Swivel (brass)
* 10-32 seal is neoprene
Tube size (in.)
Part No.
1/8
3/16
5/32
1/4
5/16
3/8
1/2
40
Part No.
639PLP-2
639PLP-5/32
639PLP-3
639PLP-4
639PLP-5
639PLP-6
639PLP-8
= Wainbee stock
Brass Fittings
215PN Close Nipple
Pipe thread NPT
1/8
1/4
3/8
1/2
3/4
207P Coupling
Part No.
215PN-2
215PN-4
215PN-6
215PN-8
215PN-12
216P Hex Nipple
Pipe Thread
NPT
1/8
1/4
3/8
1/2
3/4
Pipe Thread
NPT
1/8
1/4
3/8
1/2
3/4
220P Slotted-Head Plug
C-Hex
Part No.
9/16
3/4
7/8
1-1/16
1-3/8
207P-2
207P-4
207P-6
207P-8
207P-12
208P Reducer Coupling
C-Hex
Part No.
7/16
9/16
11/16
7/8
1-1/16
216P-2
216P-4
216P-6
216P-8
216P-12
216P Hex Nipple Reducer
Pipe NPT
1/4 x 1/8
3/8 x 1/8
3/8 x 1/4
1/2 x 1/4
1/2 x 3/8
3/4 x 1/2
C-Hex
Part No.
1/4 x 1/8
3/8 x 1/4
1/2 x 1/4
1/2 x 3/8
3/4 x 3/8
3/4 x 1/2
3/4
7/8
1-1/16
1-1/16
1-3/8
1-3/8
208P-4-2
208P-6-4
208P-8-4
208P-8-6
208P-12-6
208P-12-8
222P Adapter
Part No.
216P-4-2
216P-6-2
216P-6-4
216P-8-4
216P-8-6
216P-12-8
215PNL Long Nipple
Pipe thread NPT
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
Pipe Thread
NPT
Part No.
215PNL-2-15
215PNL-4-15
215PNL-6-15
215PNL-8-15
215PNL-2-20
215PNL-4-20
215PNL-6-20
215PNL-8-20
215PNL-2-25
215PNL-4-25
215PNL-6-25
215PNL-8-25
215PNL-2-30
215PNL-4-30
215PNL-6-30
215PNL-8-30
215PNL-2-35
215PNL-4-35
215PNL-6-35
215PNL-8-35
Pipe Thread
NPT
C-Hex
Part No.
1/8 x 1/8
1/4 x 1/8
1/4 x 1/4
3/8 x 1/8
3/8 x 1/4
3/8 x 3/8
1/2 x 1/4
1/2 x 3/8
1/2 x 1/2
3/4 x 3/8
3/4 x 1/2
3/4 x 3/4
9/16
3/4
3/4
7/8
7/8
7/8
1
1-1/16
1-1/16
1-3/8
1-3/8
1-3/8
222P-2-2
222P-4-2
222P-4-4
222P-6-2
222P-6-4
222P-6-6
222P-8-4
222P-8-6
222P-8-8
222P-12-6
222P-12-8
222P-12-12
Pipe Thread
NPT
C-Hex
Part No.
1/8 x 1/4
1/8 x 3/8
1/4 x 3/8
1/8 x 1/2
1/4 x 1/2
3/8 x 1/2
1/8 x 3/4
1/4 x 3/4
3/8 x 3/4
1/2 x 3/4
1/2 x 1
3/4 x 1
9/16
11/16
3/4
7/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
209P-4-2
209P-6-2
209P-6-4
209P-8-2
209P-8-4
209P-8-6
209P-12-2
209P-12-4
209P-12-6
209P-12-8
209P-16-8
209P-16-12
Part No.
220P-2
220P-4
220P-6
219P Countersunk Hex-Head Plug
Pipe thread NPT
1/8
1/4
3/8
1/2
3/4
C Hex
3/16
1/4
5/16
3/8
9/16
Part No.
219P-2
219P-4
219P-6
219P-8
219P-12
218P Hex-Head Plug
Pipe thread NPT
1/8
1/4
3/8
1/2
3/4
C Hex
7/16
9/16
11/16
7/8
1-1/16
Part No.
218P-2
218P-4
218P-6
218P-8
218P-12
C Hex
9/16
11/16
13/16
1-1/16
1-1/4
Part No.
213P-2
213P-4
213P-6
213P-8
213P-12
213P Cap
Pipe thread NPT
1/8
1/4
3/8
1/2
3/4
209P Bushing
210P Lock Nut
Pipe NPSL
1/8
1/4
3/8
1/2
Pipe thread NPT
1/8
1/4
3/8
C Hex
11/16
7/8
1
1-1/8
41
Part No.
210P-2
210P-4
210P-6
210P-8
1204P Male Elbow
Pipe thread NPT
1/8
1/4
3/8
1/2
Part No.
1204P-2
1204P-4
1204P-6
1204P-8
1200P-2200P 90° Union Elbow
Pipe thread NPT
1/8
1/8
1/4
1/4
3/8
3/8
1/2
Part No.
1200P-2-2
2200P-2-2
1200P-4-4
2200P-4-4
1200P-6-6
2200P-6-6
2200P-8-8
= Wainbee stock
Brass Fittings
1202P-2202P 90° Street Elbow
Female
Pipe thread
(NPT)
1/8
1/8
1/8
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
Male Pipe
Thread
(NPT)
1/8
1/8
1/8
1/8
1/4
1/4
1/4
3/8
1/4
3/8
3/8
3/8
Part No.
1202P-2-2
2202P-2-2
2202PA-2-2*
2202P-4-2
1202P-4-4
2202P-4-4
2202PA-4-4*
2202P-4-6
1202P-6-4
1202P-6-6
2202P-6-6
2202PA-6-6*
* Meets SAE Dimensions
2214P 45° Street Elbow
Pipe thread NPT
1/8
1/4
3/8
1/2
Part No.
2214P-2-2
2214P-4-4
2214P-6-6
2214P-8-8
2201P 45° Female Elbow
Pipe thread NPT
1/8
Part No.
2201P-2-2
2205P Cross
Pipe thread NPT
1/8
1/4
3/8
1/2
3/4
Part No.
2205P-2
2205P-4
2205P-6
2205P-8
2205P-12
1/8
1/8
1/4
1/4
3/8
1/2
1/2
1/4
Pipe thread NPT
1/8
1/4
3/8
1/2
3/4
Part No.
2224P-2
2224P-4
2224P-6
2224P-8
2224P-12
2225P Street Tee
Pipe thread NPT
1/8
1/4
3/8
1/2
3/4
Part No.
2225P-2
2225P-4
2225P-6
2225P-8
2225P-12
129HB 90° Elbow
Hose Barb to Male Pipe
Hose I.D.
(in)
1/4
1/4
5/16
5/16
3/8
3/8
3/8
1/2
1/2
1/4
Pipe
thread
(NPT)
1/8
1/4
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/4
Part No.
129HB-4-2
129HB-4-4
129HB-5-2
129HB-5-4
129HB-6-2
129HB-6-4
129HB-6-6
129HB-8-4
129HB-8-6
129HB-12-12
139HB 45° Elbow
Hose I.D.
(in)
1/4
1/4
3/8
Pipe
thread
(NPT)
1/8
1/4
1/4
Part No.
139HB-4-2
139HB-4-4
139HB-6-4
122HBL Hose Mender
1203P-2203P Union Tee
Pipe thread NPT
2224P Male Branch Tee
Part No.
1203P-2
2203P-2
1203P-4
2203P-4
2203P-6
1203P-8
2203P-8
2203P-12
Hose size
Part No.
3/16
1/4
5/16
3/8
1/2
122HB-3
122HBL-4
122HBL-5
122HBL-6
122HBL-8
42
125HB/125HBL Coupler
Hose I.D.
(in)
1/8
3/16
3/16
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
1
1
Pipe
(NPT)
Part No.
1/8
1/8
1/4
1/8
1/4
3/8
5/16
1/4
3/8
1/8
1/4
3/8
1/2
1/4
3/8
1/2
3/4
3/8
1/2
3/4
1/2
3/4
3/4
1
125HB-2-2
125HB-3-2
125HB-3-4
125HBL-4-2
125HBL-4-4
125HBL-4-6
125HBL-5-2
125HBL-5-4
125HBL-5-6
125HBL-6-2
125HBL-6-4
125HBL-6-6
125HBL-6-8
125HBL-8-4
125HBL-8-6
125HBL-8-8
125HBL-8-12
125HBL-10-6
125HBL-10-8
125HBL-10-12
125HBL-12-8
125HBL-12-12
125HBL-16-12
125HBL-16-16
126HB Coupler
Hose Barb to Female Pipe
Hose I.D.
(in)
1/4
1/4
5/16
3/8
3/8
3/8
1/2
1/2
Pipe
thread
(NPT)
1/8
1/4
1/4
1/8
1/4
3/8
3/8
1/2
Part No.
126HBL-4-2
126HBL-4-4
126HBL-5-4
126HBL-6-2
126HBL-6-4
126HBL-6-6
126HBL-8-6
126HBL-8-8
= Wainbee stock
Pneumatic Quick Coupling - Industrial Interchange
Female Pipe Thread
Body Size
(inch)
Part No.
Brass
Part No.
Steel
Male Pipe Thread
Part No.
Stainles
Steel (303)
Thread Size
NPFT
Body Size
(inch)
Part No.
Brass
Part No.
Steel
Part No.
Stainles
Steel (303)
Thread Size
NPFT
1/4
–
H1C
–
1/8-27
1/4
–
H0C
–
1/8-27
1/4
BH3C
H3C
SH3C
1/4-18
1/4
BH2C
H2C
SH2C
1/4-18
1/4
–
H3C-E
SH3C-E
3/8-18
1/4
–
H2C-E
SH2C-E
3/8-18
3/8
–
H1E
–
1/4-18
3/8
–
H00E
–
1/8-27
3/8
BH3E
H3E
–
3/8-18
3/8
BH2E
H0E
–
1/4-18
3/8
–
H3E-F
–
1/2-14
3/8
–
H2E
–
3/8-18
1/2
–
H1F
–
3/8-18
3/8
1/2
BH3F
H3F
–
1/2-14
1/2
–
H0F
–
3/8-18
1/2
–
H3F-G
–
3/4-14
1/2
BH2F
H2F
–
1/2-14
3/4
–
H3G-F
–
1/2-14
1/2
–
H2F-G
–
3/4-14
3/4
–
H3G
–
3/4-14
3/4
–
H2G-F
–
1/2-14
3/4
–
H3G-J
–
1-11 1/2
3/4
BH2G
H2G
–
3/4-14
3/4
–
H2G-J
–
1-11 1/2
Standard Hose Barb
Body Size
(inch)
Part No.
Brass
Part No.
Steel
1/2-14
Push-Lok Hose Barb*
Part No.
Stainles
Steel (303)
Body Size
(inch)
Thread Size
Hose I.D.
1/4
–
H8C
–
1/4
1/4
–
–
SH8C
1/4
1/4
–
H8C-D
–
5/16
1/4
–
H9C
SH9C
3/8
3/8
–
H5E
–
3/8
3/8
–
H6E
–
1/2
1/2
–
H4F
–
3/8
1/2
–
H5F
–
1/2
1/2
–
H5F-G
–
3/4
3/4
–
H5G-F
–
1/2
3/4
BH5G
H5G
–
3/4
3/4
–
H5G-J
–
1
H2E-F
Part No.
Brass
Part No.
Steel
Thread Size
Hose I.D.
1/4
BH8CP
H8CP
1/4
1/4
–
H9CP
3/8
3/8
–
H4EP
1/4
3/8
–
H5EP
3/8
3/8
–
H6EP
1/2
1/2
–
H4FP
3/8
1/2
–
H5FP
1/2
1/2
–
H6FP
5/8
* Push-Lok hose barb are designed for use with Parker Push-Lok hose and do not
require clamps.
46
= Wainbee stock
Pneumatic Quick Coupling - Industrial Interchange
Couplers - Female Pipe Thread
Body Size
(inch)
Part No.
Brass
Part No.
Steel
Part No.
Stainles
Steel (303)
Couplers - Male Pipe Thread
Thread Size
NPFT
Body Size
(inch)
Part No.
Brass
Part No.
Steel
Part No.
Stainles
Steel (303)
Thread Size
NPFT
1/4
B23A
–
–
1/8-27
1/4
B22A
–
–
1/8-27
1/4
B23
–
S23
1/4-18
1/4
B22
–
S22
1/4-18
1/4
B23E
–
–
3/8-18
1/4
B22E
–
–
3/8-18
3/8
–
25C
–
1/4-18
3/8
–
24C
–
1/4-18
3/8
B25
25
–
3/8-18
3/8
B24
24
–
3/8-18
3/8
–
25F
–
1/2-14
3/8
–
24F
–
1/2-14
1/2
–
17E
–
3/8-18
1/2
–
16E
–
3/8-18
1/2
B17
17
–
1/2-14
1/2
B16
16
–
1/2-14
1/2
–
17G
–
3/4-14
1/2
–
16G
–
3/4-14
Couplers - Standard Hose Barb
Body Size
(inch)
Part No.
Brass
Part No.
Steel
Couplers - Push-Lok Hose Barb*
Body Size
(inch)
Hose I.D.
Part No.
Brass
Part No.
Steel
Hose I.D.
1/4
B20-3B
–
1/4
1/4
B20-3BP
–
1/4
1/4
B20-4B
–
5/16
1/4
B20-4BP
–
3/8
1/4
B20-5B
–
3/8
3/8
–
24-5BP
3/8
3/8
–
24-5B
3/8
1/2
–
16-5BP
3/8
3/8
–
24-6B
1/2
1/2
–
16-6BP
1/2
1/2
–
16-5B
3/8
1/2
–
16-6B
1/2
1/2
–
16-7B
3/4
* Push-Lok hose barb are designed for use with Parker Push-Lok hose and do not
require clamps.
46-A
= Wainbee stock
Hose Clamps
2-Ear Clamps
• robust, durable one-piece design
offers positive, tamper resistant
seal
• for air and fluid media lines
• one-piece design offers quick and
easy installation
• smooth edges prevent damage to
hose
Hose OD
Part No.
Hose OD
Part No.
5/32"
10100000
13/16"
10100029
11/64"
10100001
7/8"
10100030
3/16"
10100002
15/16"
10100032
1/4"
10100004
1"
10100034
5/16"
10100008
1-1/16"
10100035
3/8"
10100011
1-1/8"
10100037
1/2"
9/16"
10100016
10100019
1-5/16"
1-7/8"
10100041
10100043
19/32"
10100022
1/1/2"
10100045
5/8"
10100024
1-5/8""
10100047
3/4"
10100027
1-3/4
10100049
Hose Clamps
178 Constant Tension Clamp
Part No.
HS Worm Gear Clamp
178 Constant Tension
Clamp
• self-tensioning spring reacts to thermal cycle diameter changes to maintain a strong uniform seal to prevent
leakage
• its precise tongue-in-groove (stepless)
design provides a smooth inner band
circumference with no steps or gaps
which guarantees a 360° uninterrupted seal
• slim, light weight, strong, all stainless
steel
• conform with: SAE J1508 type SSPC,
TMC RP332 type SSPC
• rounded edged bandsteel prevents
damage to hose
• multiple diameter settings
• 178 constant tension
17800120
Diameter Range
(inches)
Min - Max
.688 - .938
17800121
.188 -1.000
17800122
.875 - 1.125
17800123
HS Worm Gear Clamp
Re-usable sealing clamp for air, gas and liquid conveying
systems. May be tightened by wrench or screwdriver.
Part No.
Hose OD
Range
Minimum
Hose OD
Range Maximum
Nominal Hose
OD
MH-4
7/32"
5/8"
1/4"
1.000 - 1.188
MH-6
3/8"
4/8"
3/8"
17800124
1.063 - 1.250
12600374
9/16"
15/16"
1/2"
17800125
1.188 - 1.438
12600375
9/16"
1-1/16"
5/8"
17800126
1.375 - 1.563
17800127
1.500 - 1.750
12600377
11/16"
1-1/2"
1"
17800128
1.688 - 1.938
12600379
1-1/8"
2-1/16"
1-1/2"
17800129
1.875 - 2.125
12600381
1-11/16"
2-5/8"
2"
17800130
1.938 - 2.375
12600383
2-1/8"
3"
2-1/2"
17800131
2.125 - 2.563
17800132
2.313 - 2.750
17800133
2.520 - 2.953
17800134
2.750 - 3.125
17800135
2.938 - 3.313
17800136
3.125 - 3.500
17800137
3.313 - 3.750
17800138
3.500 - 3.938
17800139
3.688 - 4.125
17800140
3.875 - 4.313
17800141
4.125 - 4.500
17800142
4.313 - 4.688
17800143
4.500 - 4.938
17800144
4.688 - 5.125
17800145
4.875 - 5.313
17800146
5.063 - 5.500
44
= Wainbee stock
Blow Guns
Lever Operated Handy-Air ™ Blow Guns
• Inlet pressure: 150 PSIG maximum
• Temperature: 32° - 180°F
• Flow: Safety tip - 19.8CFM@100 PSIG;
Standard tip - 9.3 CFM@100 PSIG
• Body: diecast zinc
• Seal: Buna-N
• Inlet: 1/4" FPT
Part No.
BG2L-30STP
Pressed safety tip
BG2L-30STT
Threaded safety tip
Safety Blow Guns
BG Series
• Easy to control variable flow pistol grip trigger.
• Nozzles available that meet OSHA requirements.
• Lightweight ergonomic design.
• Bodies are constructed of impact resistant plastic.
• Rated pressure: 175 psi
• Temperature range: to 120°F
• Inlet port: 1/4" NPTF
O.S.H.A. Certification — All safety blow guns conform to
the requirements of Compressed Air Standards as currently
described in the U.S. Bureau of Labor Standards, paragraph
1910.242, when pressurized at the inlet to a maximum of 100
PSIG. Conform to current O.S.H.A. Directive No. 100-1.
Brass Nozzle Blow Guns
Contoured lever or button control both provide a natural, comfortable grip even when used with gloves. Finger guard and hang-up
hook for finger protection and quick safe storage. Die cast zinc
body, painted finish.
Part. No.
Nozzle
Meets OSHA
Requirements
BG441-NBL
Extended
No
Part. No.
Nozzle
Meets OSHA
Requirements
BG442-SBL
Extended
Yes
Part. No.
Nozzle
Meets OSHA
Requirements
BG443-NBL
¹⁄₈" Female NPT
No
Part. No.
Nozzle
Meets OSHA
Requirements
BG444-SBL
Short
Yes
Lever Operated
Part No.
00475 0010
Inlet
Port
SCFM
Rating*
1/4"
20
Button Operated
Part No.
00470 0010
Inlet
Port
SCFM
Rating*
1/4"
20
* Based on 100 PSIG inlet pressure
45
= Wainbee stock
Push-Lok Hose & Push-Lok 82 Series - JIC
801 Push-Lok Hose Plus
Multipurpose
Available Cover Colors:
Application: Pneumatic,
petroleum base hydraulic fluid,
lubricating oils and antifreeze
solutions.
Diesel fuel - approved only when
coupled with HY Series fittings.
Inner Tube: Synthetic rubber
Reinforcement: One fiber braid
Cover: Synthetic rubber, MSHA
accepted
#
Hg
Hose I.D.
Hose O.D.
Working
Pressure
Part No.
Minimum Bend
Radius
Weight
inches
of Hg
kPa
0,13
28
95
inch
mm
inch
mm
psi
MPa
inch
mm
lbs/ft
kg/m
801-4
¹⁄₄
6,3
0.50
12,7
350
2,4
2-1/2
65
0.09
801-6
³⁄₈
10
0.63
15,9
350
2,4
3
75
0.11
0,16
28
95
Temperature Range:
801-8
¹⁄₂
12,5
0.78
19,8
300
2,1
5
125
0.18
0,27
28
95
Air: +158°F (+70°C)
Water: +185°F (+85°C)
Oil: -40°F to 257°F (-40°C to
+125°C)
801-10
⁵⁄₈
16
0.91
23,0
300
2,1
6
150
0.19
0,28
15
51
801-12
³⁄₄
19
1.03
26,2
300
2,1
7
180
0.24
0,36
15
51
801-16
1
25
1.28
32,6
200
1,4
10
250
0.37
0,55
15
51
Fittings: 82 Series, HY Series
30182 Push-on Hose Barb to Male Pipe
30282 Push-on Hose Barb to Female Pipe
Thread NPTF
Hose
inch
inch
¹⁄₄ x 18
³⁄₈ x 18
¹₂ x 14
¹⁄₄
³₈
¹⁄₂
Part No.
#
30282-4-4B
30282-6-6B
Thread NPTF
Hose
inch
inch
30182-2-4B
¹⁄₈ x 27
¹⁄₄
30182-2-6B
¹⁄₈ x 27
³₈
30182-4-4B
¹⁄₄ x 18
¹⁄₄
30182-4-6B
¹⁄₄ x 18
³₈
30182-4-8B
¹⁄₄ x 18
¹⁄₂
30182-6-4B
³⁄₈ x 18
¹⁄₄
30182-6-6B
30682-4-4
1/4
7/6x20
1/4
³⁄₈ x 18
³⁄₈
30682-5-4
5/16
1/2x20
1/4
30182-6-8B
¹⁄₈ x 18
¹⁄₂
30682-5-6
5/8
1/2x20
3/8
30682-6-4
3/8
9/16x18
1/4
30682-6-6
3/8
9/16x18
3/8
30682-6-8
3/8
9/16x18
1/2
30682-8-6
1/2
3/4x16
3/8
Part No.
30282-8-8B
"B" suffix denotes Brass fitting. Some items are also available in Stainless Steel.
30682 Female JIC 37° - Swivel
Part No.
Thread
Hose I.D.
inch
inch
30182-8-4B
¹⁄₂ x 14
¹⁄₄
30182-8-6B
¹⁄₂ x 14
³⁄₈
30182-8-8B
¹⁄₂ x 14
¹⁄₂
30182-8-10B
¹⁄₂ x 14
⁵⁄₈
30682-8-8
1/2
3/4x16
1/2
¹⁄₂ x 14
³⁄₄
30682-10-8
5/8
7/8x14
1/2
30182-12-8B
³⁄₄ x 14
¹⁄₂
30682-10-10
5/8
7/8x14
5/8
30182-12-10B
³⁄₄ x 14
⁵⁄₈
30682-12-12
3/4
1-1/16x12
3/4
30682-16-16
1
1-5/16x12
1
30182-12-12B
³⁄₄ x 14
³⁄₄
30182-8-12B
B = Brass. Also available in stainless steel.
46
= Wainbee stock
Hose Assemblies / Polyethelyne Tubing
Parflex Non Marking Fast-Stor Assemblies
Part Number
Includes swivel male and rigid
male end
Red Rubber Hose
Hose O.D.
inch
Hose I.D.
inch
Working
Length
ft.
Coil I.D.
in.
Max Working
Pressure PSI at 73°F
End
Fittings
AUFS-64-TBLU-010
3/8
1/4
10
1-1/4
125
1/4" NPT
AUFS-64-TBLU-015
3/8
1/4
15
1-1/4
125
1/4" NPT
AUFS-64-TBLU-020
3/8
1/4
20
1-1/4
125
1/4" NPT
AUFS-64-TBLU-025
3/8
1/4
25
1-1/4
125
1/4" NPT
AUFS-86-TBLU-010
1/2
3/8
10
2-1/2
85
3/8" NPT
AUFS-86-TBLU-020
1/2
3/8
20
2-1/2
85
3/8" NPT
Cover:
Reinforcement:
Tube:
Applications:
Smooth red abrasion and weather resistant EPDM synthetic rubber.
Multiple layers of synthetic yarn.
Synthetic oil mist resistant EPDM synthetic rubber.
Air, water, agricultual spray solutions, and other dilute chemicals. Excellent resistant
to heat and weathering. -40°C to 100°C (-40°F to 212°F).
Hose I.D. (inch)
Hose O.D. (inch)
7092-25200
1/4"
0.500"
200
7092-31200
5/16"
0.594"
200
Part Number
PVC Clear Hose
THORO-BRAID FDA / NSF SERIES 7583
Polyethylene Tubing
7092-38200
3/8"
0.656"
200
7092-50200
1/2"
0.813"
200
7092-75200
3/4"
1.109"
200
7092-100200
1"
1.406"
200
Nylon braid, non-toxic grade (food & beverage grade).
Temperature rating: -4° C to +65°C (+25°F to 150°F)
PartNo.
Hose O.D.
(inch)
Hose I.D.
(inch)
Max psi
7583-187
3/16"
0.375"
250
7583-250
1/4"
0.451"
7583-312
5/16"
7583-381
3/8"
7583-500
7583-625
Part No.
Hose O.D.
(inch)
Hose I.D.
(inch)
Max psi
7583-750
3/4"
1.020"
150
250
7583-1000
1"
0.302"
125
0.522"
250
7583-1250
1-1/4"
1.672"
100
0.598"
225
7583-1500
1-1/2"
1.931"
100
1/2"
0.740"
200
7583-2000
2"
2.480"
75
5/8"
0.875"
200
Series E: Instrument Grade- FDA compliant
Series EB: Ultraviolet Light Resistant
Temperature Rating: -62ºC to 66ºC (-80ºF to 150ºF )
Chemically resistant and flexible
Available in black as well as other colours
NSF-51 and NSF-61 compliant black polyethylene tubing is also available and is denoted with the letters
“NSF” in the part number
Part No.
EXAMPLE:
Part No. E-43-Y-0500
corresponding descriptions:
43
– 1/4" OD
Y
– yellow
0500
– 500' long
Max psi
E-43-X-XXXX
EB-43-XXXX
E-53-X-XXXX
EB-53-XXXX
E-64-X-XXXX
EB-64-XXXX
E-86-X-XXXX
EB-86-XXXX
E-108-X-XXXX
EB-108-XXXX
Options
Size O.D. (inch)
Size I.D. (inch)
Thickness (inch)
various*
black
various*
black
various*
black
various*
black
various*
black
1/4
0.170
0.04
Pressure at 73°F
120
5/16
0.187
0.062
145
3/8
0.250
0.062
125
1/2
0.375
0.062
90
5/8
0.500
0.062
70
* Please contact customer service (1-888-924-6233) for available stock colours.
47
= Wainbee stock
Pneumatic Oil / Ball Valves
Pneumatic Oil for Air Tools & Pneumatic Equipment
Wainbee oil is specifically formulated and contains additives to improve performance
and life of all industrial air tools and pneumatic equipment, e.g. air line lubricators, air
cylinders, air valves, air motors, and air hoists.
Part No.
Litres
Container
ALE1L
1
Plastic bottle
ALE4L
4
Plastic bottle
ALE10L
10
Plastic pail
ALE205L
205
Metal drum
Specifications
SAE
5W
Viscosity
100-104 CS
Flashpoint
196°C
Viscosity Index
96
Food Grade Pneumatic Lubricant
FOOD GRADE Pneumatic Lubricant for air cylinders, air valves, air motors, air hoists,
air tools. Directions: Use in all manufacturers air line or automatic feed lubricators. For
use in food plants: do not add directly to the food. Contains: Mineral white oil. Meets
U.S. FDA regulations. USP, NF and Canadian criteria. Certified by Star K as Kosher and
Pareve.
Wainbee No.
ALE3095
Litres
Container
10 Litres
Plastic bottle
Ball Valves. 250 PSIG, female ports
Part No.
Pipe Threaded (NPT)
CV
XV500P-4 or 2BVL - 2004B
¹⁄₄
4.0
XV500P-6 or 2BVL - 2006B
³⁄₈
5.8
XV500P-8 or 2BVL - 2008B
¹⁄₂
12.0
XV500P-12 or 2BVL - 2012B
³⁄₄
35.0
XV500P-16 or 2BVL - 2016B
1
54.0
XV500P-20 or 2BVL - 2020B
1¹⁄₄
57.0
XV500P-24 or 2BVL - 2024B
1¹⁄₂
92.0
XV500P-32 or 2BVL - 2032B
2
224.0
48
= Wainbee stock
Pressure Gauges
Premium Carbon Steel Dry Gauges
Part No.
GS-011.5030HGCSBA18
GS-011.5030CSBA18
GS-011.5060CSBA18
GS-011.5100CSBA18
GS-011.5160CSBA18
GS-012.0030HGCSBA14
GS-012.0030CSBA14
GS-012.0060CSBA14
GS-012.0100CSBA14
GS-012.0160CSBA14
Dial Size
1.5”
1.5”
1.5”
1.5”
1.5”
2.0”
2.0”
2.0”
2.0”
2.0”
Pressure Range
Vacuum 0-30”Hg
0-30PSI
0-60PSI
0-100PSI
0-160PSI
Vacuum 0-30”Hg
0-30PSI
0-60PSI
0-100PSI
0-160PSI
Case Material
Black Carbon Steel
Black Carbon Steel
Black Carbon Steel
Black Carbon Steel
Black Carbon Steel
Black Carbon Steel
Black Carbon Steel
Black Carbon Steel
Black Carbon Steel
Black Carbon Steel
Port Size
1/8NPT
1/8NPT
1/8NPT
1/8NPT
1/8NPT
1/4NPT
1/4NPT
1/4NPT
1/4NPT
1/4NPT
Port Position
Back
Back
Back
Back
Back
Back
Back
Back
Back
Back
Part No.
GS-011.5030HGCSBO14
GS-011.5030CSBO18
GS-011.5060CSBO18
GS-011.5100CSBO18
GS-011.5160CSBO18
GS-012.0030HGCSBO14
GS-012.0030CSBO14
GS-012.0060CSBO14
GS-012.0100CSBO14
GS-012.0160CSBO14
Dial Size
1.5"
1.5"
1.5”
1.5”
1.5”
2.0”
2.0”
2.0”
2.0”
2.0”
Pressure Range
Vacuum 0-30”Hg
0-30PSI
0-60PSI
0-100PSI
0-160PSI
Vacuum 0-30”Hg
0-30PSI
0-60PSI
0-100PSI
0-160PSI
Case Material
Black Carbon Steel
Black Carbon Steel
Black Carbon Steel
Black Carbon Steel
Black Carbon Steel
Black Carbon Steel
Black Carbon Steel
Black Carbon Steel
Black Carbon Steel
Black Carbon Steel
Port Size
1/8NPT
1/8NPT
1/8NPT
1/8NPT
1/8NPT
1/4NPT
1/4NPT
1/4NPT
1/4NPT
1/4NPT
Port Position
Bottom
Bottom
Bottom
Bottom
Bottom
Bottom
Bottom
Bottom
Bottom
Bottom
Pressure Range
Case Material
Port Size
Port Position
Stainless Steel Liquid Filled Gauges
Part No.
Dial Size
GS-012.5030HGSSBA14
2.5"
Vacuum 0-30”Hg
Stainless Steel
1/4NPT
Back
GS-012.5160SSBA14
2.5:
0-160PSI
Stainless Steel
1/4NPT
Back
GS-012.51500SSBA14
2.5”
0-1500PSI
Stainless Steel
1/4NPT
Back
GS-012.53000SSBA14
2.5”
0-3000PSI
Stainless Steel
1/4NPT
Back
GS-012.55000SSBA14
2.5”
0-5000PSI
Stainless Steel
1/4NPT
Back
GS-012.510000SSBA14
2.5”
0-10000PSI
Stainless Steel
1/4NPT
Back
GS-012.5030HGSSBA14PM
2.5”
Vacuum 0-30”Hg
Stainless Steel
1/4NPT
GS-012.5160SSBA14PM
2.5”
0-160PSI
Stainless Steel
1/4NPT
GS-012.51500SSBA14PM
2.5”
0-1500PSI
Stainless Steel
1/4NPT
2.5”
0-3000PSI
Stainless Steel
1/4NPT
2.5”
0-5000PSI
Stainless Steel
1/4NPT
GS-012.510000SSBA14PM
2.5”
0-10000PSI
Stainless Steel
1/4NPT
PANEL
MOUNT
‘U’ BRACKET
&
BACK
PORT
Part No.
Dial Size
Pressure Range
Case Material
Port Size
Port Position
GS-012.5030HGSSBO14
2.5”
Vacuum 0-30”Hg
Stainless Steel
1/4NPT
Bottom
GS-012.5160SSBO14
2.5”
0-160PSI
Stainless Steel
1/4NPT
Bottom
GS-012.51500SSBO14
2.5”
0-1500PSI
Stainless Steel
1/4NPT
Bottom
GS-012.53000SSBO14
2.5”
0-3000PSI
Stainless Steel
1/4NPT
Bottom
GS-012.55000SSBO14
2.5”
0-5000PSI
Stainless Steel
1/4NPT
Bottom
GS-012.510000SSBO14
2.5”
0-10000PSI
Stainless Steel
1/4NPT
Bottom
49
= Wainbee stock
Pneumatic Clamps
Swing Cylinders
Hold Down Clamps
Hold Down Clamps
Hold Down Clamps
Series
Clamping Force at
87 PSI
Series
Holding
Capacity
Bar
Opens
Model
No.
Holding
Capacity
Bar
Opens
Model
No.
Holding
Capacity
Bar
Opens
8000/8100
25 lb.
802
200 lb.
102°
8021
390 lb.
90°
817-S
450 lb.
95°
8400
68 lb.
812
150 lb.
90°
8200/8300
89 lb.
Straight Line Clamps
Model
No.
Holding
Capacity
8071
450 lb.
90°
817-U
375 lb.
95°
700 lb.
90°
827-S
700 lb.
88°
827-U
600 lb.
88°
868
4000 lb.
91°
807
375 - 500 lb. 103°
8101
810-U
600 - 750 lb. 99°
846
750 lb.
97°
847-S
1000 lb.
96°
847-U
800 lb.
96°
858
4000 lb.
96°
Toggle Lock Clamps
Toggle Lock Clamps
Plunger
Travel
Model
No.
Holding
Capacity
Plunger
Travel
Model
No.
Holding
Capacity
Bar
Opens
8031
2000 lb.
0.75"
803
600 lb.
0.75"
840
1500 lb.
100°
816
200 lb.
0.44"
860
3000 lb.
180°
830
2500 lb.
1.25"
890
5000 lb.
180°
850
16000 lb.
2.00"
1000
10000 lb.
180°
Series
Max Exerting Arm
Force
Opening
(at 80PSI)
863
1600 lb.
130°
864
1600 lb.
121°
893
1600 lb.
118°
894
1600 lb.
118°
Low Profile Clamps
Model No.
Exertinf Force
800
850 - 7500 lb.
800-E
650 - 1200 lb.
1200
750 - 1600 lb.
1200-E
550 - 1200 lb.
Wainbee carries complete line of DE-STA-CO clamps.
Please call us at 1-888-WAINBEE (924-6233) for more
models and series of DE-STA-CO workholding solutions.
50
= Wainbee stock
Manual Clamps
Hold Down Clamps
Hold Down Clamps
Hold Down Clamps
Hold Down Clamps
Series Holding Handle Bar
Capacity Moves Opens
Model Holding Handle Bar
201
100 lb.
55°
100°
207
57°
99°
229
516
750 lb.
66°
122°
202
200 lb.
65°
105°
375 500 lb.
210
600 750 lb.
58°
105°
518
500 lb.
75°
90°
548
2500 lb.
129°
199°
578
4000 lb.
129°
199°
588
6000 lb.
129°
199°
Hold Down Clamps
Hold Down Clamps
1000 lb. 180°
115°
Hold Down Clamps
Hold Down Clamps
No.
Series
Holding Handle Bar
247
1000 lb. 67°
120°
317
60°
185°
557
2500 lb.
64°
192°
205
90°
1200 lb. 72°
140°
527
1000 lb. 65°
195°
558
2500 lb.
64°
192°
60 - 75
lb.
80°
267
375 400 lb.
560
2500 lb.
64°
192°
206
100 lb.
90°
90°
568
4000 lb.
64°
192°
215
200 - 250 78°
lb.
87°
225
500 - 600 70°
lb.
92°
Hold Down Clamps
Series Holding
Capacity
Handle
Moves
Bar
Opens
213
60°
90°
150 lb.
217
200 - 250 lb.
61°
91°
227
500 - 600 lb.
56°
91°
235
750 - 850 lb.
70°
92°
237
750 - 850 lb.
59°
93°
245
1000 lb.
74°
105°
528
1000 lb. 177°
180°
533
1000 lb. 90°
120°
51
= Wainbee stock
Manual Clamps
Hold Down Toggle Locking
Clamps
Hold Down Toggle Locking
Clamps
Pull Action Latch Clamps
No.
Model
No.
Holding
Capacity
Drawing
Movement
Model
No.
Holding
Capacity
Drawing
Movement
305
150 lb.
175°
92°
515
800 lb.
77°
86°
301
375 lb.
4.00"
324
500 lb.
1.53"
307
350 lb.
175°
92°
515-B 800 lb.
77°
86°
311
1200 lb.
3.38"
334
1000 lb.
2.04"
309
750 lb.
160°
88°
323
360 lb.
1.81"
344
2000 lb.
2.46"
331
1200 lb.
1.75"
374
4000 lb.
1.75"
341
2000 lb.
2.50"
Squeeze Action Clamps
Model
No.
Holding
Capacity
Drawing
Movement
Model
No.
Holding
Capacity
Drawing
Movement
Model No.
Holding Capacity
Model No.
Holding Capacity
375
4000 lb.
3.50"
330
200 lb.
2.31"
325
800 lb.
462
700 lb.
375-B
4000 lb.
3.50"
351
375 lb.
4.00"
345
800 lb.
463
700 lb.
385
7500 lb.
2.19"
371
750 lb.
5.38"
385-L
7500 lb.
2.19"
381
1000 lb.
6.13"
Straight Line Action Clamps
Straight Line Action Clamps
Model No.
Holding Capacity
Model
No.
Holding Capacity
Model
No.
Holding
Capacity
Plunger
Travel
Model
No.
Holding
Capacity
Plunger
Travel
424
200 lb.
468
700 lb.
601
100 lb.
0.63"
602
200 lb.
0.75"
424-2
200 lb.
462
700 lb.
601-O
100 lb.
0.63"
604
300 lb.
1.50"
441
350 lb.
482
1200 lb.
601-M
100 lb.
0.63"
624
700 lb.
2.63"
441-2
350 lb.
491
850 lb.
6004
450 lb.
1.50"
52
= Wainbee stock
Manual Clamps
Model
No.
Holding
Capacity
Plunger
Travel
Model
No.
Holding
Capacity
Plunger
Travel
Model
No.
606
450 lb.
1.57"
615
300 lb.
0.97"
607
800 lb.
1.63"
620
600 lb.
Plunger
Travel
Series
Holding
Capacity
Plunger
Travel
6015-M 550 lb.
0.70"
670
2400 lb.
2.25"
1.11"
603
600 lb.
1.25"
675
2400 lb.
1.10"
605
300 lb.
1.25"
690
5000 lb.
3.00"
695
5000 lb.
1.50"
607-SQ
800 lb.
1.63"
630
2500 lb.
2.00"
608
850 lb.
1.63"
640
7500 lb.
4.00"
650
16000 lb.
3.00"
609
300 lb.
1.25"
610
800 lb.
1.63"
618
800 lb.
1.63"
Hold Down Clamps
Hold Down Clamps
Holding
Capacity
Model
No.
Holding
Capacity
Bar Opens
Model
No.
Holding Handle Bar
Model
No.
Holding
Capacity
Drawing
Movement
Model
No.
Holding
Capacity
Drawing
Movement
207-LR
500 lb.
100°
225-UR
500 lb.
70°
92°
331-R
720 lb.
1.75"
351-R
4.33"
4.00"
207-UR 375 lb.
100°
235-UR
750 lb.
70°
92°
341-R
2000 lb.
2.50"
371-R
5.59"
5.38"
210-SR
750 lb.
103°
210-UR 600 lb.
103°
Model No. Holding
Capacity
Drawing
Movement
Model No. Holding
Capacity
Plunger
Travel
375-R
4000 lb.
3.50"
6015-MR 560 lb.
0.70"
385-R
7500 lb.
2.19"
603-R
600 lb.
1.25"
630-R
2500 lb.
2.00"
Wainbee carries complete line of
DE-STA-CO clamps. Please call us at
1-888-WAINBEE (924-6233) for more
models and series of DE-STA-CO
workholding solutions.
53
"Quick" Figures, Formulas and Conversion Factors
"Quick" NPT Thread Reference
¹⁄₈” NPT
¹⁄₄” NPT
³⁄₈” NPT
¹⁄₂” NPT
³⁄₄” NPT
1” NPT
“Quick” Cylinder Sizing:
1. Find the Area of the Cylinder:
Area (A) = Diameter (Bore)² x 0.7854 (Constant)
2. Fill in available information:
F=PxA
F = Force (lb)
P = Pressure (PSI)
A = Area (in²) - from above
“Quick” Valve Sizing:
Valves are sized from Cv Values (Capacity Co-efficient)
Cv = Cylinder Area (in2) x Cylinder Stroke (inches) x Compression Factor (Table 1) x ‘A’ Constant (Table 1)
Stroke Time (sec.) x 28.8
Table 1
Table 2
Compression Factors and “A” Constants
Inlet
Pressure
(PSIG)
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
Compression
Factor
(cf)
1.6
2.3
3.0
3.7
4.4
5.1
5.7
6.4
7.1
7.8
8.5
9.2
9.9
10.6
11.2
11.9
12.6
13.3
14.0
14.7
Cylinder Areas for Standard
Bore-Size Cylinders
"A" Constants
for Various Pressure Drops*
5 PSI
10 PSI
2 PSI
ΔP
ΔP
ΔP
0.155
0.129
0.113
0.097
0.091
0.084
0.079
0.075
0.071
0.068
0.065
0.062
0.060
0.058
0.056
0.055
0.054
0.052
0.051
0.050
0.102
0.083
0.072
0.064
0.059
0.054
0.050
0.048
0.045
0.043
0.041
0.039
0.038
0.037
0.036
0.035
0.034
0.033
0.032
0.031
0.066
0.055
0.048
0.043
0.040
0.037
0.035
0.033
0.031
0.030
0.029
0.028
0.027
0.026
0.026
0.025
0.024
0.024
0.023
Bore
Size
Bore
Size
Cylinder
Area (in2)
3/4"
0.44
4"
12.57
1"
0.79
4-1/2"
15.90
1-1/8"
0.99
5"
19.64
1-1/4"
1.23
6"
28.27
1-1/2"
1.77
7"
38.48
1-3/4"
2.41
8"
50.27
2"
3.14
10"
78.54
2-1/2"
4.91
12"
113.10
3-1/4"
8.30
14"
153.94
3-3/8"
10.32
Conversion Factors
1 inch = 25.4 mm
1 bar = 14.5 PSI
1” Hg = 25.4 mm Hg
1 lb (f) = 4.44 N
1 Kg = 2.2 lb
* Note: Use “A” constant at 5 PSI ΔP for most applications. On very critical applications,
use “A” at 2 PSI ΔP. You will find in many cases, a 10 PSI ΔP is acceptable and can
save money and mounting space.
Cylinder
Area (in2)
°C = 5/9 (°F-32)
54
Fluid Power Formulas
Pressure
P=
F
;F=PxA
A
Mechanical Horsepower
P = pressure (PSI)
F = force (lb.)
A = area (in2)
Piston Area (cylinder)
Ap = 0.7854 ( Dp )2
Ar = rod area
Dr = rod diameter
231
V=
H = HP x 2,547
v = piston rod speed (in/min)
Q = flow (gpm)
A = area (in2)
V x CR
28.8 t
Q=
Q = flow (gpm)
v = rod speed (in/min)
A = area (in2) [note: either Ap or Ae]
Q = flow (ft3/min.)
V = cylinder volume(in3)
CR = compression ratio
t = stroke time (seconds)
Compresssion Ratio
V = velocity (ft/sec)
GPM = gallons per minute
A = area (in²)
Pg + Pa
CR =
CR = compression ratio
Pg = gauge pressure (PSIG)
Pa = atmospheric pressure (PSIA)
Pa
Air Motor Speed
GPM = gallons per minute
V = viscosity (SSU)
D = inside diameter of pipe (in)
RPM
Torque
=
1728 Q
Disp
RPM = air motor speed
Q = flow (cfm)
Disp = motor displacement (in3/rev)
Flow Coefficient (Cv)
T=Fxd
T = torque (lb.-in.)
F = force (lb.)
d = distance (in.)
Cv = Q
22.48
Motor Torque
T = P x Disp
2π
Q x 231
Disp
ΔP x (Po + Pa)
Cv = flow coefficient
Q = SCFM
G = specific gravity of flowing medium (G = 1
for air)
Tabs = absolute temperature (460+ °F)
ΔP = pressure drop (PSI) static to static pressure
Po = outlet pressure = (inlet press - ΔP)
Pa = atmospheric pressure
Pneumatic Cylinder Rod Speed
RPM = motor shaft speed (rpm)
Q = flow (gpm)
V = S x 60
V = cylinder rod speed (in./min.)
S = stroke (in.)
t = stroke time (seconds)
t
Work
W=dxF
√
Tabs x G
T = motor torque (lb.-in.)
P = pressure (PSI)
Motor Shaft Speed
RPM =
H = heat (btu/hour)
HP = hydraulic horsepower
Flow
Pressure Drop in Pipes
ΔP/ft = GPM x V (SSU)
18,300 x (D)4
HP = motor horsepower
s = speed (rpm)
T = torque (lb.-in.)
Heat
Pipe Flow
0.3208 x GPM
A
sxT
63,025
HP =
Flow (cylinder)
vxA
HP = hydraulic horsepower
Q = flow (gpm)
P = pressure (psi)
Motor Horsepower
Piston Rod Speed (cylinder)
Q=
v = velocity (in/min)
HP = P x Q x 0.000583
Ae = effective area
Ap = piston area
Ar = rod area
V = volume (in3)
A = area (in2) [note: either Ap or Ae]
S = stroke (in.)
v = Q x 231
A
HP = mechanical horsepower
F = force (lb)
Hydraulic Horsepower
Volume (cylinder)
V=AxS
Fxv
396,000
HP =
Effective Area (cylinder)
Ae = Ap - Ar
HP = mechanical horsepower
d = distance (ft.)
F = force (lb.)
t = time (seconds)
Mechanical Horsepower
Ap = piston area
Dp = piston diameter
Rod Area (cylinder)
Ar = 0.7854 ( Dr )2
dxF
550 t
HP =
Hydraulic Tank Cooling
W = work (ft.-lb.)
d = distance (ft.)
F = force (lb.)
Hp = 0.001 x Aw x ΔT
Hp = cooling power (HP)
A w = wetted area (ft2)
ΔT = oil temp – ambient air temp
Power (ft.-lb./sec)
P=
dxF
t
d = distance (ft.)
F = force (lb.)
t = time (seconds)
P = power (ft.-lb/sec)
55
Index
Symbols
3-Way Spool Valves
Button Operated 4
Lever/Hand Operated 5
Lever Operated 3-Position 5
Pedal Operated 4
Roller/One-Way Tripper Operated 5
Toggle/Lever Operated 5
Treadle Operated 4
4-Way Spool Valves
Button Operated 6
Lever/Hand Operated 7
Lever Operated 7
Lever Operated 3-Position 7
Pedal & Treadle Operated 6
Roller Operated 6
42 Series Valves 8
A
Adaptor
Miniature Adaptor Fittings & Hose 34–35
Breather Vents 22
EM Series - Sintered Bronze Muffler/Filters 22
ES Series Silencer 22
LV Series Valves 20
Micrometer Flow Control Valves 20
Needle Valves 338 Series 21
Needle Valves 339 Series 21
Quick Exhaust & Shuttle Valves 23
Shuttle Valves 23
B
Ball Valves - 250 PSIG, female Ports 48
Blow Guns
BG Series Blow Guns 45
Safety Blow Guns 45
Lever Operated Handy-Air Blow Guns 45
Brass Body Push-in Tube Fittings 39–40
Bulkhead Union 62PLPBH 39
Female Bulkhead 66PLPBH 39
Female Connector 66PLP 39
Male Branch Tee Swivel W172PLP 40
Male Connector 10-32 68PLP 39
Male Connector W68PLP 39
Male Elbow 90° W169PLPNS 40
Male Elbow Swivel W169PLP 40
Male Run Tee Swivel W171PLP 40
Plug 639PLP 40
Union 62PLP 39
Union Elbow 165PLP 40
Union Tee 164PLP 40
Brass Fittings 41–42
122HBL Hose Mender 42
125H/125HBL Coupler Hose Barb to Male Pipe 42
126HB Coupler Hose Barb to Female Pipe 42
129HB 90° Elbow Hose Barb to Male Pipe 42
139HB 45° Elbow Hose Barb to Male Pipe 42
208P Reducer Coupling 41
209P Bushing 41
210 Lock Nut 41
213 Cap 41
215PN Close Nipple 41
215PNL Long Nipple 41
216P Hex Nipple 41
216P Hex Nipple Reducer 41
217P Coupling 41
218 Hex-Head Plug 41
219 Countersunk Hex-Head Plug 41
220P Slotted-Head Plug 41
222P Adapter 41
1200P-2200P 90° Union Elbow 41
1202P-2202P 90° Street Elbow 42
1203P-2203P Union Tee 42
1204 Male Elbow 41
2201P 45° Female Elbow 42
2205P Cross 42
2214P 45° Street Elbow 42
2224 Male Branch Tee 42
2225P Street Tee 42
Miniature Brass Fittings 33–34
Breather Vents 22
"B" Series Valves
Female Electrical Connectors 3
Solenoid Kits 3
"B" Series Valves: Inline or Manifold Mount 1, 1–2
Button Operated Mechanical 3-Way Spool Valves 4
C
Check Valves 30, 31
Clamps, Manual
Hold Down Manual Clamps 51–53, 53
Hold Down Toggle Locking Clamps 52
Pull Action Latch Clamps 52, 53
Squeeze Action Latch Clamps 52
Straight Line Action Latch Clamps 52
Straight Line Clamps 53
Clamps, Pneumatic
Hold Down Pneumatic Clamps 50
Low Profile Pneumatic Clamps 50
Straight Line Pneumatic Clamps 50
Swing Cylinders 50
Toggle Lock Pneumatic Clamps 50
Control Valves
Miniature Control Valves 30–31
D
Directair 2 Series & Directair 4 Series 4–7
Double Remote Pilot 2
Double Solenoid 1
Index
E
Electric Switch - ES-1 32
EM Series - Sintered Bronze Muffler/Filters 22
ES Series Sillencer 22
F
Fittings
Brass Body Push-in Tube Fittings 39–40
Brass Fittings 41–42
Threaded Fittings - Legris 37–38
Tube to Tube Fittings - Legris 37
Fittings - Legris 36–38
How to Order LF3000 36
Flow Control Valves 30
Fluid Power Formulas 55
G
Gauges
Pressure Gauges 49
Global Air Preparation System 9–19
Global Air Preparation System - Accessories 17
Global Air Preparation System: Filter/Regulator "Piggybacks" 12
Global Air Preparation System: Filters 9
Global Air Preparation System - Kits 18–19
Global Air Preparation System: Lubricators 11
Global Air Preparation System: P31, P32, P33 Series
Manifold Blocks 16
Modular Ball Valves 16
Safety Lockout Valves 16
Global Air Preparation System: Popular Combinations - P31
Series 13
Series 14
Series 15
Global Air Preparation System: Regulators 10
H
Heavy Duty Limit Valves & Accessories 33
Hose Assemblies / Polyethelyne Tubing
Parflex Non-marking Fast-Stor Assemblies 47
Plyethylene Tubing 47
PVC Clear Hose 47
Red Rubber Hose 47
Hose Clamps
2-Ear Clamps 44
178 Constant Tension Clamps 44
HS Worm Gear Clamps 44
Hose & Tubing
Polyethylene Tubing 47
PVC Clear Hose 47
Red Rubber Hose 47
HV Series Valves 8
I
Industrial Interchange
Pneumatic Quick Couplings 43
L
Legris Bulkhead Connector Fittings 37
Legris Plug-in accessories 38
Legris Threaded fittings 38
Legris Threaded Fittings 37
Legris Tube to Tube Fittings 37
LV Series Valves 20
M
Manifold Blocks - Global FRL 16
Manual Clamps 51–53
Mechanical Valves: 3-Way Spool Valves 4–5
Mechanical Valves: 4-Way Spool Valves 6–7
Miniature 2-Way Brass Control Valves 26
Miniature 3-Way Brass Control Valves 26–28
Miniature 4-Way Brass Toggle Valves 29
Miniature 4-Way Stem Valves 29
Miniature Control Valves 30–31
Check Valves 30, 31
Flow Control valves 30
Needle Valves 30
Piston Valve 31
Pressure Regulators 31
Pulse Valves 30
Shuttle Valves 30
Miniature Fittings / mufflers / manifold
12-Port Manifold 35
Muffler 35
Screw Plug 35
Miniature Valves Actuators 31–32
Modular Ball Valves - Global FRL 16
N
Needle Valves 21, 30
O
Oil
Pneumatic Oil for Air Tools & Pneumatic Equipment 48
Index
P
T
Parflex Non Marking Fast-Stor Assemblies 47
Pedal Operated Mechanical 3-Way Spool Valves 4
Piston Valve 31
PL / VL Series Valves 8
Pneumatic Clamps 50
Pneumatic Lever Valves
42 Series Valves 8
HV Series Valves 8
PL/VL Series Valves 8
Pneumatic Oil 48
Pneumatic Quick Coupling - Industrial Interchange 43
Female Pipe Thread 43
Male Pipe Thread 43
Push-Lok Hose Barb 43
Standard Hose Barb 43
Polyethylene Tubing 47
Pressure Gauges
Carbon Steel Dry Gauges 49
Stainless Steel Liquid Filled Gauges 49
Pressure Regulators 31
Pulse Valves 30
Push-Lok Hose & Push-Lok 82 Series - JIC
801 Push-Lok Hose 46
30182 Push-on Hose Barb to Male Pipe 46
30282 Push-on Hose Barb to Female Pipe 46
PVC Clear Hose 47
Treadle Operated Mechanical 3-Way Spool Valves 4
Q
Quick Figures and Formulas 54
Quick NPT Thread Reference 54
Quick Valve Sizing 54
R
Red Rubber Hose 47
S
Safety Blow Guns 45
Safety Lockout Valves - Global FRL 16
Shuttle Valves 23, 30
Single Remote Pilot 2
Single Solenoid 1
Spool Valves
Mechanical 3-Way 4–5
Mechanical 4-Way 6–7
Stainless Steel Cylinders - Clippard 24–25
V
Valves
42 Series: 4-Way, 5-Port, 3-Position 8
"B" Series 3
"B" Series: Inline or Manifold Mount 1
Control Valves 30–31
Heavy Duty Limit Valves & Accessories 33
HV Series: 4-Way, 4-Ports, 3-Position 8
LV Series 20
Mechanical 3-Way Spool Valves 4–5
Mechanical 4-Way Spool Valves 6–7
Miniature 3-Way Brass Control Valves 26–27
Miniature 4-Way Brass Toggle Valves 29
Miniature 4-Way Stem Valves 29
Needle Valves - 338 Series 21
Needle Valves - 339 Series 21
PL/VL Series: 4-Way, 4-Port, 3-Position 8
Pneumatic Lever Valves 8
Shuttle 23
Valves Actuators
Miniature Valve Actuators 31–32
To our valued Customers:
Over the years, Wainbee has evaluated, selected and inventoried the most reliable products
from world-class manufacturers to become one of North America’s most complete source for
automation solutions based on pneumatic, hydraulic, electrical and electronic technologies.
This edition of Quick Picks features selected pneumatic items designated with a
which we
stock and can ship to you the same day or next day delivery.
These items are just a small selection from the tens of thousands of items that we can supply.
The Pneumatic Quick Picks is one of the services provided by Wainbee to get you:
• The rights products,
• at the lowest cost, and
• with a minimal amount of effort on your part.
If you are looking for a pneumatic product that is not in this book or would like to learn more
about other products groups, our systems capabilities or our procurement cost reduction
programs, please contact our knowledgeable staff at Wainbee branch nearest you by calling
1-888-WAINBEE.
Our multi-techonology expertise brings
SMART SOLUTIONS to many industries
Wainbee
Engineered Systems
• Hydraulic power units
• Aircraft testing systems
• Pressure testing systems
Why limit your horizon by dealing with
a company restricted to only one or two
automation technologies?
When you partner with Wainbee,
you benefit from our coast-to-coast
expertise in:
We hope that this Pneumatic Quick Picks catalogue serves you well.
• Hydraulics
• Pneumatics
• Electromechanical motion
• Electronic controls
• Assembly tools
• Machining solutions
• Filtration
Sincerely,
The result?
To get the latest news on automation and motion control products and services, visit our
website at www.wainbee.com.
THE WAINBEE TEAM
You get “smart solutions” that integrate
these technologies to provide you with
the best automation and motion control
solutions for your requirements and will
improve your productivity (and profits)
while reducing training and maintenance
costs.
What can we help you do smarter?
1-888-WAINBEE
w a i n b e e . c o m
HEAD OFFICE: TORONTO/MISSISSAUGA BRANCH
5789 Coopers Avenue, Mississauga, Ontario
Phone: 1-888-WAINBEE (924-6233) / (905) 568-1700
Hose & Fittings direct line: (905) 568-3489
E-mail corporate: [email protected]
Canada L4Z 3S6
After hours phone: (416) 334-6364
Fax: (905) 568-0083
E-mail branch: [email protected]
MONTRÉAL/POINTE CLAIRE
VANCOUVER/RICHMOND
CHICOUTIMI/SAGUENAY
EDMONTON
215 boul. Brunswick,
Pointe Claire, Québec H9R 4R7
Phone: (514) 697-8810
Fax: (514) 697-3070
CALGARY
938 - 55th Avenue NE,
Calgary, Alberta T2E 6Y4
Phone: (403) 236-1133 Fax: (403) 279-9367
135, rue Des Routiers,
Chicoutimi, Québec G7H 5B1
Phone: (418) 698-4884 Fax: (418) 698-4909
HALIFAX/DARTMOUTH
KITCHENER
10 Thornhill Drive #9, Dartmouth,
Nova Scotia B3B 1S1
Phone: (902) 468-1787 Fax: (902) 468-3225
65 Trillium Park Place #14, Kitchener
Ontario N2E 1X1
Phone: (519) 748-5391 Fax: (519) 748-4893
SEPT-ÎLES (Wainbee SHCN Inc.)
PRINCE GEORGE
453 rue Noël, Sept-îles,
Québec G4R 1M1
Phone: (418) 962-4949 Fax: (418) 968-5749
Pneumatic quick picks
5500 Continental Way
Prince George, BC V2N 5S5
Phone: (250) 564-3230 Fax: (250) 562-7987
2231 Vauxhall Place,
Richmond, British Columbia V6V 1Z5
Phone: (604) 278-4288 Fax: (604) 278-3490
After Hours Phone: (604) 278-4290
10336-59th Avenue, Edmonton,
Alberta T6H 1E6
Phone: (780) 434-9528 Fax: (780) 437-7931
SASKATOON
3111 Millar Ave, Unit 20, Saskatoon,
Saskatchewan S7J 6N3
Phone: (306) 652-1433 Fax: (306) 652-1436
FRL’s
Actuators
QUÉBEC
950 avenue St-Jean-Baptiste, Québec
Québec G2E 5E9
Phone: (418) 683-1956 Fax: (418) 688-9885
Clamps
Hoses
WINNIPEG
1393 Border Street #4, Winnipeg,
Manitoba R3H 0N1
Phone: (204) 632-4558 Fax: (204) 694-5494
Valves
Filtramax Inc. , a Wainbee affiliate, provides
cost-effective, single source liquid and air
filtration solutions by combining the strength of
worls-class suppliers with its own technical and
supply chain experience.
Fittings
PQP-EAST-2011-5H
Gauges
1-888- WAI N B EE
wainbe e.c om

Wainbee Pneumatic Quick Picks

Transcription

Similar documents

Brass SAE 45° Flared Fittings

tubing and fittings - Lesman Instrument Company

Air Tanks, Axles, Brass Fittings, Gladhand, and Spring Brakes

Parts Manual

champion / anderson fittings midland parker eaton