product catalog 2004 - Neby Hi

PRODUCT CATALOG 2004
EXCEPTIONAL SOUND. NO EXCEPTIONS.
The products you are about to discover in these pages – DVD
and CD players, preamplifiers, surround sound processors,
power amplifiers, receivers and more – are unique.
They come from a 40 plus year old, family owned organization
dedicated to the design and manufacture of the finest in affordable, high performance home theater and high fidelity components.
We use the word “manufacture” advisedly. We make everything
from core components to complete products ourselves. In our
own factories. Under our own control.
Is this important?
Extremely.
Among other things, this integration gives us the opportunity
to select everything that goes into a Rotel product. Even down
to what we call “board level” parts – the semiconductors and
passive circuit elements that distinguish merely competent
designs from extraordinary ones. This is an essential part of
our Balanced Design Concept.
Balanced Design Concept is a disciplined synthesis of physics, electronics, and mechanical engineering guided by our firm
belief that the best need not be the most costly.
Balanced Design begins with basic circuits conceived by an
international team of award-winning engineers. It includes an
exhaustive evaluation of every part used in these circuits to
determine not just which one will do... but which one will do
best.
Balanced Design also means that we verify every choice we
make with the most critical and sensitive laboratory instrument
available anywhere --- the human ear.
That’s why our team of trained critical listeners evaluate every
prototype, and then collaborate in fine-tuning basic designs until
they fully meet Rotel’s demanding standards.
Balanced Design combines both hard science and experienced
intuition to bring you closer to the source…any source, be it
music or movies…and to let you hear without compromise
exactly what the artists intended you to hear.
Nothing more. And certainly nothing less.
TABLE OF CONTENTS
Rotel Amplifiers, Designed for the Real World
4
The Power Supply
5
Power Amplifiers
Surround Sound Processors
6-7
8-11
DVD Players
12-13
Surround Sound A/V Receivers
14-17
Stereo Power Amplifiers
18-19
Stereo Pre-Amplifiers
20-21
Tuner, CD Player, Stereo Integrated Amplifiers
22-23
CD Carousel Player, Stereo Receiver
24-25
Euro Series
26-29
Back Panels
30-31
ROTEL AMPLIFIERS
DESIGNED FOR THE REAL WORLD
Of all audio components, the amplifier has
Furthermore, real music is quite unlike the
arguably the toughest job. It must provide
steady state tones typically used for mea-
a common interface for a diverse range of
surement purposes. Music is dynamic, a
source products, including CD, DVD-A, SACD
mix of chords, crescendos and instrumental
players and MM/MC phono cartridges. On
transients that may peak for just a few mil-
the other side of the divide, the amplifier is
liseconds. Once again, Rotel amplifiers are
also forced to wrestle with the unpredictable
designed to accommodate these peaks,
demands of a loudspeaker. In some instanc-
delivering huge increases in clean power well
es, the two roles are seemingly incompat-
beyond their rated specification.
ible, as the amplifier caresses millivolt
Take the RB-1050 as an example. Modestly
source signals while delivering many tens
rated at 70W/8 ohm, it will actually deliver
of volts and, potentially, as many amperes
125W under dynamic, music-like conditions,
of current to maintain a rock solid power
increasing to 225W, 375W and 470W into
output.
tougher 4, 2 and 1 ohm loads. This is an
The success of this balancing act depends
exceptional performance for a ‘mere’ 70W
largely on power supply design and circuit
amplifier and helps explain why our amplifi-
layout, especially the ground plane. It is our
ers typically sound louder and more dynamic
custom-built transformers, multiple supply
than competing products with a notionally
regulators and symmetrical topologies of all
similar specification.
Rotel amplifiers that provide the foundation
But high dynamic power, and therefore high
of a performance that’s realized in our high-
dynamic current, is of little benefit without
current, complementary power amp stages.
great linearity. Many manufacturers claim
Our published specifications are very con-
bold figures for ‘peak or instantaneous cur-
servative, and reflect a maximum continuous
rent’ without specifying the duration of the
power output that the amplifier will comfort-
peak or how distorted the signal. After all,
ably maintain. In reality, of course, loud-
an amplifier that can deliver 20A of current
speakers do not behave like the 8 ohm or 4
at <1% distortion cannot fairly be compared
ohm test loads used for measurement. They
to another that suffers 10% or more at
comprise reactive (capacitive and inductive)
the same output. Our RB-1050 will deliver
elements that force the voltage and current
470W/1ohm with 10msec peaks at less
to become out of step as the impedance
than 1% distortion, that’s nearly 22A of
swings as high as 50 ohms or more before
clean current from our least powerful model!
plunging to 2 ohms, or even less, at differ-
Rotel amplifiers: high value audio engineer-
ent frequencies.
ing designed to tackle the real world, not just
This ability to grapple with almost any
the lab bench.
speaker load, no matter how difficult, sets
Rotel amplifiers apart from the mainstream.
THE POWER SUPPLY
You’ve no doubt noticed that we’ve spent some time in this brochure describing Rotel’s approach to power supply design. Here’s why.
A power supply is the heart of any home entertainment component. It
pumps, if you will, proper amounts of current at just the right voltage so that
all the active circuits in your amplifier, DVD player, surround sound processor,
etc., can do the job they were designed to do.
Power supplies aren’t black magic. They’re comparatively simple to design,
but good ones, however, are costly. That’s why few manufacturers describe
theirs – an accurate picture might be more embarrassing than enlightening.
At Rotel, we take the opposite approach. We talk about our power supplies
because we’ve already done our homework and built the manufacturing
infrastructure we need. For example, we design and manufacture our own
transformers in-house. Why? Because a transformer, that critical transition
between AC power from the wall and the rest of your component, must have
enough current capability to satisfy your component’s active circuitry. And
it must accurately “step down” the wall voltage to levels that are useable by
subsequent circuit stages.
Making our own transformers gives us a three-fold advantage over our competition. First, we don’t need to shop for a “good enough” product made
by someone else. Second, we can schedule production so that the right
transformer is available just as the component it was designed for is ready
to receive it. Lastly, we don’t have to factor in some other company’s profit
margin when we price our products. Given that the transformer is often the
single most expensive part of a component, that’s an enormous advantage.
For one thing, it means we can use higher quality capacitors – BHC Slit Foils,
Aerovox T-Networks, for example – to store and provide the instantaneous
current delivery that improves a Rotel component’s ability to deliver full
dynamics of even the most demanding music selection or soundtrack. So
Rotel products simply reproduce sound with greater fidelity to what we know
is “real.”
Of course, there are other parts to a power supply – rectifiers and voltage
regulators, to name but two. These are chosen and configured with the
same meticulous care we lavish on any other part of a Rotel component.
So the next time someone doesn’t describe a power supply properly, you can
ask yourself “What are they hiding?” Or, you can simply buy a Rotel.
5
RMB-1048
RMB-1066
RMB-1075
RMB-1095
Rotel’s RMB-1048 is the perfect solution for a
The RMB-1066 multi-channel power amplifier is
This multi-channel power amplifier delivers 120
Producing a full kilowatt (1000 watts!) of output
wide range of audio applications. Able to deliver in
an enormously flexible unit intended primarily for
watts (all channels driven), thanks to a power sup-
power, Rotel’s RMB-1095 is a stunning realiza-
excess of 8 x 40 watts per channel into 8 ohms
use in surround systems and home audio distribu-
ply composed of a generous 1,500 VA toroidal
tion of Rotel’s capabilities in amplifier design. It
(65 watts into 4 ohms), it is a natural choice for
tion. The power supply and output circuits are
transformer and eight 10,000 µf British-made
is, for all intents and purposes, a multi-channel
distributed audio or multizone use. Use one ampli-
configured for exceptional reserve capability and
Slit Foil capacitors. 20 output devices, each of
version of the RB-1080 stereo power amplifier,
fier to provide music to four stereo pairs, or eight
stability. In six channel mode, the RMB-1066
which is rated for 130 watts and 15 amperes of
already recognized as one of the finest amplifiers
single channels of speakers with individual level
delivers 60 watts RMS each (20 Hz to 20 kHz @
current capability, make full use of the supply’s
available at any price. Rated at 200 watts per
controls per pair. You can also add another amplifi-
0.03% THD into 8 ohms). In five channel mode
potential. The RMB-1075’s generous headroom
channel (all 5 channels driven into 8 ohms, 20 Hz
er for additional sub-zones to enjoy music in every
(one channel quiescent), power increases to 70
and state of the art signal-to-noise measurements
– 20 kHz, less than 0.05% THD), the RMB-1095’s
room of the house. Alternatively, the RMB-1048
watts RMS, each measured by the same demand-
ensure unsullied reproduction of the most dynam-
power supply is built around two Rotel made 1.2
makes a great home theater amplifier for today’s
ing standards. Amplifier pairs can be bridged to
ic as well as the most delicate sonic nuances.
kVa toroidal transformers. Eight British-made
latest formats such as 6.1. The RMB-1048 is
develop 150 watts x 3 for almost half a kilowatt
Complete with gold plated RCA and DB-25 input
BHC Slit Foil capacitors each with over 15,000 µf
a rugged, smooth performer with a high current
of output power. Three rear panel switches (one
connectors, the RMB-1075 is ideally suited for
of energy storage, combine with thirty 150 watt,
power supply. Additional features include front
two-way and two three-way) make bridging easy
either home theater applications or bi-amped sys-
15 amp output devices for uncompressed repro-
panel level controls, an internal input link, daisy
and also link the inputs via internal “daisy chain”
tems optimized for music reproduction. Separate
duction of the most dynamic source material. A
chain outputs and 12 volt trigger.
connections with a single source, thus simplifying
12 volt “trigger” input and output jacks make this
sophisticated ”over current” protection circuit with
system wiring. Buffered line level outputs allow
amplifier well suited for fully integrated systems
front panel LED indicators guards against poten-
multiple amplifiers to “daisy chain” from a single
with total remote control capability.
tially harmful operating conditions. Special “cur-
source. Input level controls, strategically placed
rent absorbers” minimize turn-on surges while gold
between front panel heat sink fins and an exten-
plated balanced XLR and single-ended RCA inputs
sive 6 LED indicator array ease system adjust-
provide easy connection to a variety of controller/
ment and monitoring. 12 volt trigger operation
preamplifiers. Heavy rear casters assist in placing
and a detachable IEC power cord directly address
the amplifier.
demanding custom installation requirements while
custom brass speaker terminals provide full contact power transfer.
Power Amplifiers
Stereophile Guide To Home Theater,
December 2001
John J. Gannon, RMB-1075 Review
“...the RMB-1075 didn’t just deliver
the goods - it had a major league
windup.”
“It’s another of Rotel’s best buys
in multichannel amplifiers, and one
of the best buys in this category,
period.”
The Perfect Vision, May/June 2000
Neil Gader, RMB-1095 Review
“Effortless”
RMB-1048
RMB-1066
“At only $400 per individual watt/
channel, the RMB-1095 is nothing
if not a great buy. For a 5.1 system,
it’s unbeatable.”
RMB-1075
Model
Power Configurations
Watts/Channel
all channels driven,
unbridged, 8 ohm load,
20 to 20k Hz, 0.06% THD
THD (20-20,000Hz)
cont. rated power
one-half rated power
one watt per channel
IM Distortion (at rated
ower,60Hz:7kHz = 4:1 )
Damping Factor (8 ohms)
Input Sens. / Impedance
Frequency Response
S/N Ratio (IHF A)
Power Consumption
Dimensions (W x H x D)
Front Panel Height
Weight (net)
RMB-1095
RMB-1048
8 x 40 watts
40 watts
RMB-1066
6 x 60 watts
60 watts
RMB-1075
5 x 120 watts
120 watts
RMB-1095
5 x 200 watts
200 watts
0.03%,
0.03%,
0.05%,
0.02%,
0.03%,
0.03%,
0.05%,
0.03%,
0.03%,
0.03%,
0.05%,
0.03%,
0.03%, maximum
—
—
0.03%, maximum
maximum
maximum
maximum
maximum
150
1.0V / 22 kohms
15-100 kHz (±1dB)
116dB
700 watts
433 x 121 x 428mm
17¹⁄₈ x 4³⁄₄ x 16⁷⁄₈"
109 mm, 4.3"
12.2 kg / 27 lbs
maximum
maximum
maximum
maximum
150
1.5V / 22 kohms
15-100 kHz (±1dB)
116dB
700 watts
433 x 121 x 428mm
17¹⁄₈ x 4³⁄₄ x 16⁷⁄₈"
109 mm, 4.3"
11.8kg / 26 lbs.
maximum
maximum
maximum
maximum
180
1.0V / 27 kohms
15-100kHz (=0.5dB, -3dB)
115dB
800 watts
433 x 189 x 380mm
17¹⁄₈ x 7¹⁄₂ x 15"
176 mm, 6.9"
17kg / 37.4 lbs.
400
1.5V / 33 kohms
15-100kHz (=0.5, -3dB)
116dB
800 watts
433 x 237 x 380mm
17¹⁄₈ x 9³⁄₈ x 15”
221 mm, 8.7"
34kg / 75 lbs.
7
Rotel’s RSP-1098 surround sound processor/preamplifier
brings everything together. Here, you’ll find outstanding
performance coupled with startling simplicity. Thank Rotel’s
Balanced Design philosophy, that disciplined synthesis of
physics, electronics, and mechanical engineering guided by
our firm belief that the best need not be the most costly.
The RSP-1098 is truly unique as even a cursory look at its
front panel will tell you. Instead of a jumbled array of controls
and arcane symbols, you’ll find an integral LCD color monitor
flanked by just a power switch, two knobs, and six miniature
pushbuttons. These elements let even technophobes enjoy
the RSP-1098’s exceptional performance, yet allow more
sophisticated users a level of control, system customization,
and convenience simply beyond the capabilities of lesser processors.
The RSP-1098 is all Rotel. That means a power supply built
around Rotel-made dual toroidal transformers and special
low-ESR storage capacitors for a rock-solid source of operating current and superb isolation between digital and analog
sections.
The RSP-1098 uses modular construction borrowed from the
computer industry. The benefits from this carefully spaced
array of individual circuit cards? Simply better isolation – performance free of the crosstalk and noise inevitable with more
crowded designs.
Of course, all this internal potential might be wasted if the
RSP-1098 didn’t handle all the components in your home theater system. So we’ve included eight assignable digital audio
inputs (five coaxial and three optical) in addition to eight A/V
analog inputs, each with composite and S-video capability.
Outputs include eight main audio outputs, four digital audio
(two coaxial, two optical), one tape out, zone 2 out( with
video), and three A/V outputs all with composite and S-video
connections.
The world of high definition video won’t challenge the RSP1098’s four component video inputs, signal paths, and
switching ICs. In addition, composite and S-video input signals can be processed through a transcoder circuit to output
all Component Video signals. The result is superb system
flexibilty and outstanding performance.
RSP-1098 Surround Sound Processor
Home Theater December 2003
Steve Guttenberg
“The sound, by the way, is right
up there with the very best components you can buy.” “ I have to
admit that assessing a pre/pro’s
sound quality usually takes some
time, but the RSP-1098’s sound
immediately grabbed my heart.”
Sound & Vision October 2003
Daniel Kumin
“This is one high-end preamp/
processor that deserves close
inspection by serious home theater builders and A/V dreamers
alike.”
RECOMMENDED ACCESSORY:
RLC-900
AC line Filter & Power Sequencer
The RLC-900 AC line filter and
sequencer is a must for all systems.
There are nine AC sockets (2 amplifier, 3 digital, 3 accessory and 1
unswitched) to connect and protect
your valuable components from voltage spikes and RF noise.
Model
Audio
THD
IM Distortion (60 Hz:7 kHz)
Freq. Response
S/N Ratio (1HF A-weighted)
Input Sensitivity/Impedance
Tone Controls (Bass/Treble)
Preamp Output Level
RSP-1098
<0.05%
<0.05%
10 Hz - 120kHz,
± 3 dB (line level)
10Hz - 95kHz,
± 0.3 dB (digital level)
95 dB (Stereo) Analog
92 dB (Dolby Digital, dts) 0dBFs
Line Level, 200mV / 100 kohms
±6 dB at 50Hz / 15kHz
1.0V / 250 ohms
Video
Freq. Response
S/N Ratio
Input Impedance
Output Level
General
Power Consumption:
Power Requirements (AC)
Weight
Dimensions (W x H x D)
Front Panel Height
3 Hz – 100MHz, ± 3 dB
45 dB
75 ohms
1 volt
70 watts
115 volts, 60Hz (USA version)
230 volts, 50Hz (CE version)
45.5 lbs.
433mm x 165mm x 421mm,
17¹⁄₈ x 6¹⁄₂ x 16⁵⁄₈”
150 mm, 5.9"
9
Taking a page from Rotel’s flagship, the RSP-1098, the RSP-1068
Surround Sound Processor/Preamplifier combines flexibility, superior performance, and easy operation.
Flexibility begins with enough inputs and outputs to easily accommodate the most demanding system configurations. You can
connect up to eight sources, five of them video-based, plus a CD
player, external tuner, and an analog tape recorder. In addition,
there are five assignable digital audio inputs, 3 coaxial and 2 optical. There’s also a direct analog stereo mode that bypasses all
digital processing.
To increase your viewing pleasure, the RSP-1068 includes inputs
and switching/transcoding for five composite, five S-, and three
component video sources. Custom ID capability lets users program
the front panel display so it precisely confirms all of your A/V input
selections.
Advanced microprocessors from Crystal Semiconductor handle
Dolby Digital (complete with dynamic range adjustments), Dolby
Digital EX, DTS, and Dolby Pro Logic II decoding. The RSP-1068
also automatically detects and decodes DTS ES, DTS ES Discrete
and Matrix, DTS 24/96, HDCD, and MP3-encoded audio. There’s
also DTS Neo:6 mode for cinema sound and music. Six other DSP
modes (Music 1-4, 5 CH Stereo, and 7 CH Stereo) complement traditional two-channel stereo operation to make the RSP-1068 more
than suitable for any source.
An adjustable subwoofer crossover and “on the fly” center,
surround and subwoofer level adjustments mean you can adjust
the RSP-1068’s response to perfectly match your preferences. Do
you want large front speakers for stereo, but small front speakers
for Dolby encoded movies? The RSP-1098 can do that and more.
Upgradeable software means you won’t be left behind by new
advances either.
The RSP-1068 integrates into advanced custom-designed systems
with an RS-232 port, 12-volt “trigger” outputs, discrete on/off
remote control command codes, multi-source/multi-zone operation
with composite video, group delay settings, and a fully programmable universal remote control.
Last – but certainly not least – is Rotel’s most salient point: Sound
quality. Exacting care in parts selection, circuit design, and particular attention to the power supply complete with Rotel-designed and
built toroidal transformers result in clearly audible superiority.
RSP-1068 Surround Sound A/V Preamp/Processor
RSP-1066
Stereohile Guide To Home Theater
January 2003 - Robert Deutsch
“Rotel has come up with another
winner.”
RSP-1066
The Perfect Vision - September /
October 2002 Neil Gader
“...the Rotel RSP1066 lit up Dolby
Digital and DTS material like lighter fluid on charcoal...soundstaging
and depth were excellent.”
Model
Audio
Continuous Amplifier Power
(Number of channels driven)
Continuous Amplifier Power
(two channels driven)
Total Harmonic Distortion
Intermodulation Distortion (60 Hz:7 kHz)
Frequency Response
Analog Bypass
Digital Input
Signal to Noise Ratio (IHF A-weighted)
Analog Bypass
Digital Input 0 dBFs (Dolby Digital, dts)
Input Sensitivity/Impedance
Contour (LF / HF)
Preamp Output Level/Impedance
RSP-1068
<0.008 %
<0.008 %
10 Hz - 120 KHz, ± 3 dB
10 Hz - 95 KHz, ± 3 dB
95 dB
92 dB
Line Level: 200 mV/100K ohms
± 6 dB at 50 Hz / 15 KHz
1.0 V / 1K ohm
Decodable Digital Input Signal
Video
Frequency Response
Signal to Noise Ratio
Input Impedance
Output Impedance
Output Level
FM Tuner
Usable Sensitivity
Signal to Noise Ratio (at 65 dBf)
Harmonic Distortion (at 65 dBf)
Dolby Digital, Dolby Digital
EX, Dolby Prologic IIx, DTS,
DTS_ES, DTS96/24, LPCM
(up to 192K), HDCD, MP3,
MPEGMultichannel
3 Hz - 10 MHz, ± 3 dB
(Composite, S-Video)
3 Hz - 100 MHz, ± 3 dB
(Component Video)
45 dB
75 ohms
75 ohms
1.0 Volt
Stereo Separation (1 kHz)
Output level
Antenna Input
AM Tuner
Sensitivity
Signal to Noise Ratio
Output level
Antenna Input
General
Power Consumption:
Power Requirements (AC)
40 watts, Standby 6 watts
115 volts, 60 Hz
(USA version)
230 volts, 50 Hz
(CE version)
433 x 121 x 334 mm
Dimensions (W x H x D)
17¹⁄₈ x 4³⁄₄ x 13¹⁄₈”
7.6 Kg
Weight (net)
Front Panel Height (for rack mount) 109 mm
11
RDV-1040 DVD Player
RDV-1050 DVD / Audio Video Player
RDV-1060 DVD / Audio Video Player
The new RDV-1040 progressive scan DVD player (NTSC and
The RDV-1050 gives all the disc-reading flexibility you could
Rotel’s new RDV-1060 single-disc DVD-A player is as remark-
PAL) combines superb performance, extraordinary flexibility,
wish for: DVD-V for movies, DVD-A for superb high-resolution
ably flexible as it is singularly affordable.
and the convenience of Rotel’s unique Balanced Design phi-
audio, even recordable discs like DVD-R and DVD-RW. Video
The advanced optical transport system reads DVD-A, DVD-V,
losophy.
CD, SVCD, and JPEG-format photo discs aren’t left out either,
CD, CDR, CD-RW, CD-V, and MP3-encoded discs. A high-rigid-
In addition to conventional DVD-Video discs, the RDV-1040
nor are conventional music CDs and your favorite CD-R/RW
ity disc platform means fewer data errors, less correction,
plays recordable DVD video formats: DVD-R, and DVD-RW.
discs – even those holding MP3 and WMA-encoded music files!
and better sound quality. Three advanced Cirrus Logic/Crystal
Video CD and SVCD formats aren’t forgotten either. The RDV-
Any product’s performance begins with its power supply and
Semiconductor 24-bit/192 kHz digital-to-analog converters
1040 also handles JPEG-format photo discs.
the RDV-1050 is no exception. An advanced pulse circuit and
handle the often difficult “domain transition” with aplomb.
The player is also an excellent choice for audio sources as it
individually regulated supply stages generate optimal voltages.
On the video side, the RDV-1060 complements any home the-
Critical audio and video D/A converters are all wideband
ater system with composite, S-, and component video outputs
designs usually reserved for players many times the RDV-
fed by a high-speed 12-bit video digital-to-analog converter. In
1050’s price.
addition, the RDV- 1060’s progressive video capability (NTSC
Features include variable and slow search, 6-step zoom play,
and PAL) provides superlative picture quality for even very
strobe play, and resume functions. Plus, you’ll find optical and
large screen home theater systems.
coaxial digital audio outputs for easy connection to any system.
The RDV-1060 is also designed to make full use of today’s
Video outputs include composite, S-, and component video.
multizone demands. Indeed, the bi-directional RS-232 data
Adaptive Geometrical Chroma Mapping reduces unwanted pic-
port ensures compatibility with virtually any whole-home con-
ture artifacts while Digital Direct Progressive Scan (NTSC and
trol system. A 12-volt trigger input and rear panel IR (infrared)
PAL) lets you watch the best picture your monitor is capable of
jacks make the RDV-1060 the perfect player for the highest
producing.
performance systems.
handles conventional CDs and CD-R/RW discs – even those
holding MP3 and WMA-encoded music files!
Convenience? Slow Search and variable speed scan make finding that one scene easier than ever. The Video Fine Processor
makes viewing more enjoyable as it provides adjustments for
brightness, contrast, saturation, tint, sharpness and other picture parameters. A full-function remote is included.
DVD Players
RDV-1060
Hi Fi News October 2003
“If Rotel’s range of separates
is mopping up the market, then
this RDV-1060 makes it a clean
sweep…this model offers excellent build quality.”
RDV-1040
“ Described as ‘gorgeous’ and
‘luxurious’ the RDV-1060 drew us
further into every DVD-A in our
selection... It’s an organic player
in a field of GM crops.”
RDV-1060
Hi Fi News October 2003
RDV-1050
“…gorgeous and luxurious” “…It’s
an organic player in a field of GM
crops”.
RDV-1060
Model Number
Disc Capacity
Frequency Response
Signal / Noise Ratio
Dynamic Range
Channel Separation (1kHz)
THD + Noise (at 1kHz)
IM Distortion
Max Audio Line Output
Digital Output Level (Optical)
Digital Output Impedance
Power Consumption
Dimensions (W x H x D)
Front Panel Height
Weight
RDV-1040
1
2 Hz to 44 kHz
>96dB
100dB
>98dB
0.006%
0.0045%
2 VRMS
-21 to - 15 dBm (peak)
75 ohms
12 Watts
433 x 92 x 334mm
17 x 3⁵⁄₈ x 13¹⁄₄”
80 mm, 3.1"
4.5 kg (10 lbs)
RDV-1050
1
2 Hz to 88 kHz
>96dB
110dB
>98dB
0.0045%
0.0045%
2 VRMS
-21 to - 15 dBm (peak)
75 ohms
26 Watts
433 x 92 x 334mm
17 x 3⁵⁄₈ x 13¹⁄₄”
80 mm, 3.1"
5.1 kg (11.2 lbs)
RDV-1060
1
2 Hz to 88 kHz
>96dB
110dB
>98dB
0.0012%
0.0045%
2 VRMS
-21 to - 15 dBm (peak)
75 ohms
26 Watts
433 x 92 x 334mm
17 x 3⁵⁄₈ x 13¹⁄₄”
80 mm, 3.1"
5.1 kg (11.2 lbs)
13
The RSX-1067 is the definitive Home Theater surround-sound receiver.
It gets all the elements right with a high capacity power supply built
around a massive toroidal transformer to deliver precise amounts of
voltage and current to all active circuitry. The payoff is in real performance – in both brute power and in the sonic subtleties important to
the most discerning audiophile. When driving a multi-channel speaker
array, for example, the RSX-1067 delivers 100 high-current watts from
each of its seven amplifiers. Does 5.1 satisfy your surround needs?
Then use the remaining two channels for audio in a second room!
The RSX-1067 has enough inputs and outputs to meet almost any
system configuration. Custom ID capability lets you program the front
panel display for instant source identification. Assignable digital inputs
let you match the RSX-1067 to your chosen roster of sources. For the
audio purist there’s even a mode that bypasses all digital processing.
You’ll even find 30 AM/FM presets for instant access to your favorite
broadcasts.
Advanced microprocessors from Crystal Semiconductor handle Dolby
Digital (complete with dynamic range adjustments), Dolby EX, DTS and
Dolby Pro Logic II decoding. The RSX-1067 automatically detects and
decodes DTS ES, DTS ES Discrete, HDCD, and MP3 encoded audio and
provides several music modes for optimum enjoyment of all sources.
Jitter and ripple-free digital-to-analog conversion ensures the highest
sound quality.
Multi-zone, multi-source audio and HDTV video capability? Of course.
Thanks to high performance video switching (with bandwidth over
200MHz!), the RSX-1067 handles three component video sources
and provides a component video output for high resolution monitoring. Furthermore, internal video transcoding capability means all video
sources, even those with just composite and S-video outputs, will look
their best.
The RSX-1067 boasts a full complement of convenience features, too.
You can specify both turn-on and maximum volume settings, specify volume control tracking or “speed,” select group delay to accurately synch
video and audio. You’ll benefit from an advanced, comprehensive, yet
simple-to-use speaker set-up menu to tailor your system exactly to your
specifications.
For custom installations, the RSX-1067 includes an RS-232 interface,
three assignable 12-volt trigger outputs, discrete on/off remote control command codes, rear panel IR inputs, and a detachable AC power
cord. The fully programmable RR-1050 remote control is standard.
RSX-1067 Surround Sound A/V Receiver
Home Theater - September 2002
Mark Fleischmann
“The sound was so natural that it
triggered memories that normally
come back to me only in concert
halls - very personal stuff.”
RSX-1065
Sound and Vision April 2002 David Ranada
“The RSX-1065 had deeper power
reserves than we usually find with
100 watt-per-channel A/V receivers, and it could deliver the full
rated power, and then some, to
all five channels at once, which is
very unusual.”
Model
Audio
Continuous Amplifier Power
(Number of channels driven)
Continuous Amplifier Power
(two channels driven)
Total Harmonic Distortion
Intermodulation Distortion (60 Hz:7 kHz)
Frequency Response
Analog Bypass
Digital Input
Signal to Noise Ratio (IHF A-weighted)
Analog Bypass
Digital Input 0 dBFs (Dolby Digital, dts)
Input Sensitivity/Impedance
Contour (LF / HF)
RSX-1067
100 watts/ch (20-20k Hz,
<0.05% THD, 8 ohms)
(Seven Channel Driven)
120 watts/ch (1kHz, <1.0%
THD, 8 ohms, DIN) (Two Channel
Driven)
<0.05 %
<0.05 %
10 Hz - 120 KHz, ± 3 dB
10 Hz - 95 KHz, ± 3 dB
95 dB
92 dB
Line Level: 200 mV/100K ohms
± 6 dB at 50 Hz / 15 KHz
Preamp Output Level/Impedance
Decodable Digital Input Signal
Video
Frequency Response
Signal to Noise Ratio
Input Impedance
Output Impedance
Output Level
FM Tuner
Usable Sensitivity
Signal to Noise Ratio (at 65 dBf)
Harmonic Distortion (at 65 dBf)
Stereo Separation (1 kHz)
Output level
Antenna Input
1.0 V / 1K ohm
Dolby Digital, Dolby Digital EX, DTS, DTS_ES,
DTS96/24, LPCM(up to 192K), HDCD, MP3,
MPEGMultichannel
3 Hz - 10 MHz, ± 3 dB (Composite, S-Video)
3 Hz - 100 MHz, ± 3 dB (Component Video)
45 dB
75 ohms
75 ohms
1.0 Volt
14.2 dBf
70 dBf
0.03%
45 dB
1V
75 ohms unbalanced
AM Tuner
Sensitivity
Signal to Noise Ratio
Output level
Antenna Input
General
Power Consumption:
Power Requirements
(AC)
Dimensions
(W x H x D)
Weight (net)
Front Panel Height
(for rack mount)
500 uV/m
40 dB
500 mV
Loop Antenna
990 watts, Idling
power 130 watts,
Standby 19 watts
115 volts, 60 Hz
(USA version)
230 volts, 50 Hz
(CE version)
433 x 189 x 400 mm
17¹⁄₈ x 7¹⁄₂ x 15³⁄₄”
20.4 kg
176 mm
15
The RSX-1056 is Rotel’s most affordable surround
sound receiver but certainly doesn’t sacrifice performance or features! The high current amplifier
section puts a full 75 watts RMS per channel at your
sonic disposal (that’s with all five channels driven
simultaneously from 20 Hz to 20 kHz with no more
than 0.05% THD!). In the real world, this is far more
power than you’ll find in other products that provide
only two-channel ratings. Of course, superb power
supply design helps here as does careful parts
evaluation and selection. But that‘s simply part of
Rotel’s Balanced Design heritage.
Concerned about future needs? A larger room, for
example? Or, an eventual move to full 7.1 surround
capability? The RSX-1056 features a “Redirect”
option that handles all of this with the simple addition of a two-channel amplifier for the front channels.
How’s that for an “enjoy now and enjoy more later”
approach?
Rotel hasn’t forgotten convenience either. The RSX1056 provides analog and digital connections for
up to seven additional components. The RSX-1056
even allows you to re-label inputs, assign inputs,
perform advanced bass management and equalize
channels.
Advanced microprocessors from Crystal
Semiconductor handle Dolby Digital, Dolby Digital EX,
DTS, DTS ES Discrete and Matrix, DTS 24/96, DTS
Neo:6 and Dolby Pro Logic II decoding and provide
several music modes for your enjoyment, too. Three
component inputs and internal video transcoding let
you see the best picture possible regardless of your
source.
The RSX-1056 is perfect for custom installations.
There’s an RS-232 interface, multi-room, multisource with composite video, three assignable 12volt trigger outputs, discrete on/off remote control
command codes, rear panel IR inputs, and a detachable AC power cord. A fully programmable remote
control is standard.
RSX-1056 Surround Sound A/V Receiver
RSX-1055
The Perfect Vision - March / April
2003 - Neil Gader
“Others may buy an AVR to
impress their friends. The Rotel
is the grown -up AVR you buy for
yourself.
DVD ETC - July / August 2003
Greg Robinson
“Its stellar build quality, warm
musical sound, 7.1 decoding capability and excellent warranty make
the RSX-1055 a clear winner.”
Model
Audio
Continuous Amplifier Power
(Number of channels driven)
RSX-1056
75 watts/ch (20-20k Hz, <0.05%
THD, 8 ohms) (Five Channel
Driven)
Continuous Amplifier Power
100 watts/ch (1kHz, <1.0%
(two channels driven)
THD, 8 ohms, DIN) (Two Channel
Driven)
Total Harmonic Distortion
<0.09 %
Intermodulation Distortion (60 Hz:7 kHz) <0.05 %
Frequency Response
Analog Bypass
10 Hz - 120 KHz, ± 3 dB
Digital Input
10 Hz - 95 KHz, ± 3 dB
Signal to Noise Ratio (IHF A-weighted)
Analog Bypass
95 dB
Digital Input 0 dBFs (Dolby Digital, dts)
92 dB
Input Sensitivity/Impedance
Line Level: 200 mV/100K ohms
Contour (LF / HF)
± 6 dB at 50 Hz / 15 KHz
Preamp Output Level/Impedance 1.0 V / 1K ohm
Dolby Digital, Dolby Digital EX, Dolby Prologic
Decodable Input Signal
IIx, DTS, DTS_ES, DTS96/24, LPCM (up to
192K), HDCD, MP3, MPEGMultichannel
Video
Frequency Response
3 Hz - 10 MHz, ± 3 dB (Composite, S-Video)
3 Hz - 100 MHz, ± 3 dB (Component Video)
Signal to Noise Ratio
45 dB
Input Impedance
75 ohms
Output Impedance
75 ohms
Output Level
1.0 Volt
FM Tuner
Usable Sensitivity
14.2 dBf
Signal to Noise Ratio (at 65 dBf) 70 dBf
Harmonic Distortion (at 65 dBf) 0.03%
Stereo Separation (1 kHz)
45 dB
Output level
1V
Antenna Input
75 ohms unbalanced
AM Tuner
Sensitivity
Signal to Noise Ratio
Output level
Antenna Input
General
Power Consumption:
Power Requirements
(AC)
Dimensions
(W x H x D)
Weight (net)
Front Panel Height
(for rack mount)
500 uV/m
40 dB
500 mV
Loop Antenna
450 watts, Standby
6 watts
115 volts, 60 Hz
(USA version)
230 volts, 50 Hz
(CE version)
433 x 162 x 421mm
17¹⁄₈ x 6¹⁄₂ x 16⁵⁄₈”
17 Kg
150 mm
17
RB-1050
RB-1070
RB-1080
RB-1090
Ideal for demanding custom installations, the ultra-
The latest interpretation of a classic Rotel award-
The RB-1080 rests close to the pinnacle of Rotel’s
The RB-1090 stands as the premier example of
stable RB-1050 combines audiophile sound quality
winning power amplifier, the RB-1070 continues the
two channel power amplifier offerings. Power out-
Rotel’s award-winning prowess in amplifier design.
and “bullet-proof” circuitry. A multi-mode amplifier,
tradition of oversized toroidal transformer and high
put (200 watts per channel into 8 ohms) is extraor-
Essentially two separate amplifiers sharing only
the RB-1050 develops 70 watts per channel for ste-
capacity power supply. In addition, Symmetrical
dinary. The Rotel-made toroidal transformer feeds
a chassis and power cord, the RB-1090 delivers
reo reproduction. Individual sensitivity adjustments
Signal Trace circuit topology assures the precise
separate power supplies for each channel. British
380 watts per channel into conventional 8 ohm
and “auto on” signal sensing circuitry allows use
interchannel timing clues necessary for pinpoint
BHC Slit Foil storage capacitors provide quick
loudspeaker loads and a prodigious 700 watts per
with a variety of distribution devices or processors.
stereo reproduction. At 130 watts per channel, the
charge/discharge times for instantaneous response
channel into demanding 4 ohm loads.
Buffered line level outputs allow multiple ampli-
RB-1070 is more than capable of meeting the chal-
to the most demanding signal peaks. Damping fac-
Each of the RB-1090’s two totally independent
fiers to “daisy chain” from a single source. The
lenges of even the least efficient loudspeakers. An
tor, at 1,000, shows this amplifier’s unparalleled
power supplies is based on a large (1.25 kVA) Rotel
toroid-based power supply and high damping factor
internal bridge option provides truly prodigious 330
ability to lock onto the most difficult speakers to
made, multiple-secondary toroidal transformer and
ensure precise control of virtually all speakers. 12
watt output capability. Front panel LED status indi-
precisely control diaphragm motion and give you
four 22,000 µf British-made Slit Foil storage capaci-
volt “trigger” jacks and a detachable AC cord make
cators show power, protection, and bridged mode
superior sound quality. Heavy duty dual binding
tors. This enormous reservoir feeds an output
this amplifier ideal for remote operated distributed
for instant system analysis. A separate input and
posts encourage the use of the most advanced
stage of enormous current capability. The result is
audio systems. A front panel LED array shows
output for 12 volt “trigger” signals and detachable
speaker cables while switchable balanced (XLR)
truly prodigious output, making the RB-1090 more
clipping and protection modes for quick system
AC cord increase this amplifier’s flexibility by allow-
and unbalanced (RCA) inputs provide extraordinary
than able to meet the worst speaker-induced tor-
analysis.
ing total integration with even the most complex
system configuration flexibility. Front panel heat
ture tests. The RB-1090 is stable down to 2 ohms
remote-controlled systems.
sinks add a strikingly dramatic look. Separate
and delivers peak power in excess of 1,500 watts
inputs and outputs for 12 volt “trigger” signals and
per channel under these demanding conditions.
a detachable AC cord make this amplifier well suit-
Is power alone enough justification for this ampli-
ed for custom-installed systems with total remote
fier? No, the RB-1090’s real worth lies in its flex-
control capability.
ibility and sound quality. With both balanced (XLR)
and single-ended (RCA) inputs and dual sets of
heavy duty “biwire-ready” binding posts, the RB1090 easily interfaces with an encompassing range
of system components.
Stereo Power Amplifiers
Hi Fi Choice, June 2001
RB-1070 Review
“This is a transparent and forthright
amplifier that shines a revealing light
on what’s going on in the music.”
Suono, April 2001
RB-1070 Review
“This amplifier has a great presence
and has a tendency to put all instruments where they belong. The voice
has a rare beauty seldom found at
this price”.
RB-1050
Stereophile Magazine, March 2002
RB-1070
RB-1080 Review
“…the N800 ($16,000 B&W
Loudspeakers) made it clear how
good an amplifier the Rotel was…”
Stereophile, January 2000
Robert Deutsch, RB-1090 Review
“…it reminded me of amplifiers from
Rowland and YBA – pretty good company for a $2,000 amplifier.”
RB-1080
RB-1090
“…it’s worth considering even if your
equipment budget can stretch to
include one of the high-priced super
Model
Power Configurations
Watts/Channel
all channels driven,
unbridged, 8 ohm load,
20 to 20k Hz, 0.06% THD
THD (20-20,000Hz)
cont. rated power
one-half rated power
one watt per channel
IM Distortion (at rated
ower,60Hz:7kHz = 4:1 )
Damping Factor (8 ohms)
Input Sens. / Impedance
Frequency Response
S/N Ratio (IHF A)
Power Consumption
Dimensions (W x H x D)
Front Panel Height
Weight (net)
RB-1050
2 x 70 watts
70 watts
RB-1070
2 x 130 watts
130 watts
1 x 330 watts
(bridged mono)
RB-1080
2 x 200 watts
200 watts
RB-1090
2 x 380 watts
380 watts
0.03%,
0.03%,
0.03%,
0.03%,
0.03%,
0.03%,
0.03%,
0.03%,
0.03%,
0.01%,
0.02%,
0.03%,
0.03%,
0.01%,
0.02%,
0.03%,
maximum
maximum
maximum
maximum
500
1.0V / 33 kohms
10-100kHz (±1dB)
116dB
250 watts
433 x 92 x 334mm
17¹⁄₈ x 3⁵⁄₈ x 13¹⁄₈"
80 mm, 3.1"
8.1kg / 17.86 lbs.
maximum
maximum
maximum
maximum
500
1.0V / 33 kohms
4 - 100kHz (=0.5dB, -3dB)
120dB
400 watts
433 x 121 x 334mm
17¹⁄₈ x 4³⁄₄ x 13¹⁄₈"
109 mm, 4.3"
10.2kg / 22.4 lbs.
maximum
maximum
maximum
maximum
1000
1.5V / 32 kohms
15-100 kHz (±1dB)
116dB
550 watts
433 x 140 x 380mm
17¹⁄₈ x 5¹⁄₂ x 15"
127 mm, 5.0"
16.7kg / 36.8 lbs.
amps.”
maximum
maximum
maximum
maximum
1000
1.8V / 33 kohms
10-100 kHz (±1dB)
125dB
800 watts
433 x 237 x 380mm
17¹⁄₈ x 9³⁄₈ x 15”
221 mm, 8.7"
37.9kg / 83.6 lbs.
19
RC-1070
Optimized for the real-world audiophile who demands flexibility
and sound quality at an affordable price, the RC-1070 preamplifier delivers an extraordinary level of satisfaction. Featuring
traditional Rotel engineering prowess, this unit features a power
supply based on a custom-made toroidal transformer. The RC1070 provides six line-level inputs in addition to a carefully engineered phono input for moving magnet and high output moving
coil cartridges. A convenient contour control allows easy and
repeatable timbre adjustments. With two sets of main outputs,
a 12 volt “trigger” jack, and a Rotel-system remote control for
both the preamplifier and a companion Rotel CD, tuner, or DVD
player, the RC-1070 brings the flexibility and sound quality of
Rotel separates within easy reach.
RC-1090
The RC-1090 is the latest expression of Rotel’s continuing
dedication to providing the finest components for traditional two
channel music reproduction. Beginning with a custom Rotel
made toroidal transformer, the low output impedance power
supply makes extensive use of the new ultra-fast T-Network
capacitors. Circuits for each channel follow Symmetrical Circuit
Trace strategy to ensure precise timing, pinpoint imaging, and
accurate soundstaging. Rigorous parts selection includes metal
foil resistors, polystyrene, and polypropylene signal capacitors. The output stage is particularly noteworthy for its high
current, low impedance design which provides substantial current reserves for driving even the most difficult interconnect/
amplifier combinations.
Flexibility? The RC-1090 boasts eight inputs, including a low
noise, high overload MM/MC phono stage and a balanced input
with XLR connectors. A centrally-located information display
provides instant system status checks. Separate Listen and
Record selectors provide additional capability. Balanced XLR
outputs supplement the industry-standard RCA connections
and make the RC-1090 an ideal match for all high performance
amplifiers. A programmable remote control, RS-232 interface,
two 12 volt “trigger” outputs, a detachable AC cord, two AC convenience outlets, and discrete on/off remote control command
codes complement the RC-1090’s exceptional performance
Stereo Pre-Amplifiers
RC-1090 / RB-1080
The Absolute Sound
November / December 2001 Anna Logg
“I am listening to a great Chesky
CD - Monty Alexander’s Caribbean
Circle played very loudly, and I
could swear I was in a jazz club,
except that it’s not dark and
RC-1070
there’s no cigarette smoke.”
RECOMMENDED ACCESSORIES:
RQ-970
Performance Phono Equalizer
RC-1090
The RQ-970 is Rotel’s answer for
the forgotten vinyl fan. RQ-970
accepts Moving Magnet or Moving
Coil cartridges and provides high
performance output to drive any
standard line level input of a
Preamplifier, Integrated Amplfier or
Receiver.
RSS-900
Speaker Selection Box
Model
THD(20-20kHz)
IM Distortion
Input Sens. / Impedance
Phono (MC)
Phono (MM)
Line level inputs
Phono Overload (MC/MM)
Output Sens. / Impedance
Frequency Response
Phono input
Line Level Input
Tone Control
Bass
Treble
S/N Ratio (IHF A)
Phono (MC)
Phono (MM)
Line Level Input
Power Consumption
Dimensions (W x H x D)
Front Panel Height
Weight (net)
RC-1070
0.006%
0.006% @ 1v out
RC-1090
0.004%
0.004% @ 1v out
250 mV / 100 ohms
1.2 mV /68 K ohms
150 mV / 24 K ohms
16 mV / 160 mV
1V / 100 ohms
250 mV / 100 ohms
2.5 mV / 47 K ohms
150 mV / 18 K ohms
16 mV / 160 mV
1V / 100 ohms
20-20k Hz (±0.5dB)
4-100k Hz (+0, -3dB)
20-20k Hz (±0.2dB)
4-100k Hz (±0.5dB)
+3, -4dB at 100Hz
=ddB at 10kHz
—
—
70 dB
95 dB
10 watts
430 x 92 x 334mm
17¹⁄₈ x 3⁵⁄₈ x 13¹⁄₈"
80 mm, 3.1"
5.4 kg / 11.9 lbs
70 dB
75 dB
100 dB
13 watts
433 x 125 x 334mm
17¹⁄₈ x 4⁷⁄₈ x 13¹⁄₈”
109 mm, 4.3"
7.8 kg / 17.2 lbs
Rotel’s RSS-900 provides a simple
solution for multi-room sound.
Simply wire the speaker outputs of
your receiver or power amplifier to
the speaker inputs of the RSS-900
and you can then connect up to five
additional pairs of loudspeakers.
A simple, but high quality rocker
switch on the front panel turns on
and off the additional speakers.
RLC-900
AC line Filter & Power Sequencer
The RLC-900 AC line filter and
sequencer is a must for all systems. There are nine AC sockets (2
amplifier, 3 digital, 3 accessory and
1 unswitched) to connect and protect your valuable components from
voltage spikes and RF noise.
21
RT-1080 Tuner
RCD-1072 High Resolution CD Player
RA-1062 Stereo Integrated Amplifier
RA-1070 Integrated Amplifier
The RT-1080 AM/FM tuner is the perfect RF source
The RCD-1072 proves conclusively that cost-con-sci-
The RA-1062 is the evolution of Rotel’s highly
Extraordinary sound quality, remarkable flexibility,
for a custom-installed system, thanks to a bi-direc-
ous high performance in a single disc CD player is
regarded RA-1060. The design team spent hundreds
and unusual convenience highlight the RA-1070
tional RS-232 computer-style interface, dual antenna
still available – and still outperforming many so-called
of hours evaluating individual component perfor-
Integrated Amplifier.
inputs, and total remote control capability. Sound
“audiophile” DVD players.
mance from input to output. Chief among these
Substantial power (100 watts RMS x 2) and a damp-
quality comes from the same attention to detail that
Utilizing circuit configurations originally developed for
improvements is the UK designed and manufactured
ing factor of 400 assure precise control of all but
distinguishes every Rotel: custom-wound transform-
Rotel’s reference-class components, this affordable
T-Network power supply capacitor. These premium
the most demanding loudspeakers. The high capacity
ers, high grade power supply parts, refined audio
unit redefines your sonic expectations. The segment-
grade components follow the tradition of our Slit Foil
power supply features a Rotel-built oversized toroidal
circuits carefully designed to reveal all the subtleties
ed power supply features a large toroidal transformer
capacitors by incorporating tiny perforations in the
transformer and British-made BHC slit foil capacitors
FM broadcasts can bring.
for minimal power supply “sag” as well as reduced
capacitor foil to reduce distortion. Even more signifi-
for exceptionally fast response to the demanding
The RT-1080 also includes RDS (Radio Data System)
hum emissions. High quality rectifiers, tight toler-ance
cantly, the T-Network capacitor has multiple connec-
peaks found in today’s sources. The RA-1070 allows
enhancements to make FM broadcasting even more
voltage regulation, and low-ESR storage capaci-tors
tions that effectively create several smaller capaci-
connection of up to eight source components includ-
enjoyable.* RDS lets you see your favorite station’s
make sure that all circuits always operate as their
tors within a single larger body and thus ensure far
ing a high quality MM phono input, five additional
call letters, for example, and the type of program
designers intended. The critical analog stage uses
lower voltage intermodulation between input and
line level inputs, and two independent tape monitor
material they’re broadcasting.
meticulously selected parts in a “minimalist” circuit
output.
circuits.
Thirty (30) direct access presets allow you to pro-
environment to ensure the finest sound quality.
The result is a striking portrayal of musical subtle-
It also features discrete On/Off codes, 12 volt trig-
gram your favorite stations for quick recall. A variety
The RCD-1072 uses the same over-scan disc mecha-
ties supported by a deep, well defined and accurate
gers, an RS-232 interface, two preamplifier outputs,
of tuning modes and built-in compensation for US
nism once reserved only for premium priced play-
bass-line.
speaker switching and a headphone jack along with
and European FM broadcast standards make this
ers. The remarkable new Burr-Brown PCM-1732 IC
The RA-1062 includes a MM phono stage with inputs
remote control.
tuner truly universal.
provides advanced digital filtration, HDCD decoding,
for Tuner, Tape 1 and 2, CD, and Aux. A 12 volt trig-
* RDS functions determined by your local radio stations.
and precise D/A conversion. A coaxial digital output
ger, IR remote input, speakers A & B selector, head-
supplements the high current analog outputs. A high-
phone output, balance control, contour switch round
density FL display, complete programming capability,
out the features of this superbly capable integrated
remote control, and a 12-volt trigger complete the
amplifier.
picture.
Tuner, High Resolution CD Player, Stereo Integrated Amplifiers
RA-1062
Hi Fi Choice, August 2003
“If they don’t know it yet, then
Rotel’s RA-1062 is an amp that
its peers will grow to hate. It is
solidly and reliably constructed,
offers a generous assortment of
features and delivers a powerful,
purposeful and crisp sound that
pushes all the emotive buttons. All
this and more, but at a price that
represents a slap in the face to its
RT-1080
Models
Audio
Watts/Channel
—
all channels driven,
8 ohm load, 20 to 20KHz,
0.03% THD, max.
—
THD, (20-20kHz)
IM Distortion
—
Input Sens. / Impedance
—
phono
—
line level
—
Output Level
10-15k Hz
Frequency Response
(±3dB)
Damping Factor
—
Tone Control
—
Bass
—
Treble
—
S/N Ratio (IHF A)
FM S/N Ratio (@65dBf)
75dB (mono),
72dB (stereo)
RT-1080
RCD-1072
RA-1062
RA-1070
RT-1080 Continued
FM Usable Sens. (75 )
FM 50 db Quieting (75 )
mono
stereo
FM Harmonic Distortion
(65dBF/1kHz)
FM Capture Ratio
Alt Chan. Selectivity
Spurious Response Ratio
Stereo Separation
(100Hz/1kHz/10kHz)
AM Sensitivity
AM Selectivity
Power Consumption
Dimensions (W x H x D)
Front Panel Height
Weight (net)
12.2 dBf
20.2 dBf
45.3 dBf
0.2% (mono)
0.3% (stereo)
2.0 dB
47 dB
90 dB
40dB/45dB/35dB
300 µV/m
25 dB
10 Watts
433 x 92 x 334 mm
17¹⁄₈ x 3⁵⁄₈ x 13¹⁄₈"
80 mm, 3.1"
15 lbs
Model
Total Harmonic Distortion
+ Noise
Intermodulation Distortion
Frequency Response
(± 0.5 dB)
Channel Balance
Phase Linearity
Channel Separation
Signal to Noise Ratio
Dynamic Range
Digital to Analog
Converters
Speed Accuracy,
Wow & Flutter
Output Impedance
Digital Output
Load Impedance
Power Requirements
USA Version
European Version
Power Consumption
Dimensions (W, H, D)
Front Panel Height
(for rack mount)
Weight (net)
RCD-1072
0.0045% @ 1kHz
Model
Continuous Power Output
0.0045% @ 1kHz
20-20kHz
Total Harmonic Distortion
(20Hz-20kHz)
Intermodulation Distortion
(60 Hz : 7 kHz, 4:1)
Frequency Response
Phono Input
Line Level Inputs
Damping Factor
(20-20,000 Hz, 8 ohms)
Line Input Sensitivity /
Impedance
Tone Control
Bass
Treble
Line Input Overload
Phono (MM) Sensitivity /
Impedance
Input (Phono) Overload
Preamplifier Output /
Impedance
Signal to Noise Ratio
(IHF “A” weighted)
Power Requirements
USA:
EC:
Power Consumption
Dimensions (W x H x D)
± 0.5 dB
± 0.5 degree
> 98 dB @ 1kHz
> 100dB
> 96 dB
18 bit equivalent,
multi-level Delta-Sigma
DAC with 8x oversampling
digital filter and HDCD
Quartz Crystal Precision
100 Ohms
0.5 Volt, Peak to Peak
75 Ohms
AC 115V, 60 Hz
AC 230V, 50 Hz
20 Watts
17 x 3 11/16 x 13 1/4”
433 x 92 x 337mm
3 5/32”, 80 mm
5.8 kg, 12.8 lb.
Front Panel Height
Weight (net)
competition.”
RA-1062
60 watts/channel
(20-20 kHz, < 0.03%, 8 ohms)
< 0.03% at rated power,
1/2 power, or 1 watt
< 0.03% at rated power,
1/2 power or 1 watt
20Hz-15kHz, ±0.2dB
10Hz-100kHz, +1, –3dB
150
160 mV / 24 kOhms
+3-4dB at 100 Hz
+3dB at 10kHz
5V
2.4mV /47 kohms
170 mV
1V / 470 ohms
>95 dB
115 Volts, 60 Hz
230 Volts, 50 Hz
300 Watts
433 x 92 x 334mm
17¹⁄₈ x 3⁵⁄₈ x 13¹⁄₈”
80mm / 3 3/16”
7.8 kg, 17.2 lbs.
Model Number
Watts/Channel
all channels driven,
unbridged, 8 ohm load
20 to 20kHz, 0.03% THD
THD (20-20,000Hz)
cont. rated power
one-half rated power
one watt per channel
IM Distortion (rated power)
Damping Factor (8 ohms)
Input Sens. / Impedance
Phono (MM)
Line level inputs
Frequency Response
Line Level Input
Phono input
Tone Control
Bass
Treble
S/N Ratio (IHF A Network)
Phono (MM)
Line level inputs
Power Consumption
Dimensions (W x H x D)
Front Panel Height
Weight (net)
RA-1070
100 watts/ch
0.03%,
0.03%,
0.03%,
0.05%,
400
max
max
max
max
1.2mV / 68 kohms
150 mV / 33 kohms
4-100kHz (+/- 3db)
20-20kHz (+/- 0.5dB)
+3-4dB at 100 Hz
+3dB at 10kHz
70 dB
102 dB
400 watts
433 x 121 x 334mm
17¹⁄₈ x 4³⁄₄ x 13¹⁄₈"
109 mm, 4.3"
20 lbs.
23
RCC-1055 CD Carousel
The RCC-1055 combines performance and convenience in a familiar 5 CD
carousel platform. Utilizing an oversized EI core transformer with high grade
filter capacitors the RCC-1055 power supply provides smooth, ripple free
voltage and current to all critical electronics.
RCC-1055 incorporates HDCD decoding and also includes premium grade
DAC’s with a high current analog output stage to ensure faithful reproduction
of all your favorite CD’s and CDR’s. The RCC-1055 adds a 12 volt trigger, an
IR repeater and a full function remote control for total convenience.
RX-1050 Stereo Receiver
An intrinsic part of Rotel’s exciting new 10 Series, this receiver conclusively
proves that “stereo” is very much a part of today’s world where both music
and home theater provide enriching entertainment for the entire family.
In fact, RS-232 communications capability, 12 volt “trigger” outputs, and an
array of IR (infrared) remote control inputs and outputs combine to make
the RX-1050 an ideal choice for either a sophisticated “whole house” multisource, multi-zone home entertainment system or a dedicated single-room
system. The front panel – simple, inviting, and elegant – tells you it will satisfy the most demanding connoisseur or the novice user.
Power output is a substantial 100 watts per channel. But there are important differences between this rating and ones you may see from other manufacturers. Drawing on the knowledge gained from satisfying even the most
demanding audiophiles with affordable products, Rotel builds the RX-1050
with a rock-solid power supply that includes an oversized toroidal transformer and twin high quality storage capacitors. Eight discrete, high current
output transistors ensure uncompromising reproduction of the most difficult
sources, even when the RX-1050 is used with inefficient speakers in large
rooms.
The RX-1050’s seven inputs include a high quality moving magnet phono
preamp that breathes new life into older but still-treasured record collections. A full array of four composite video inputs and three outputs (including monitor) with switching means you don’t have to give up video capability
to enjoy stereo’s straightforward pleasures. Additional convenience features
include a pre-programmed remote control, detachable IEC-type power cord,
two switched convenience outlets, pre-out/main-in jacks, zone 2 output, A/
B speaker selector, and a front panel headphone jack.
CD Carousel, Stereo Receiver
RX-1050
Absolute Sound December /
January 2003 Issue #139
Chris Martens
“If you are a music lover with highend tastes and mid-fi budget constraints, Rotel’s RX-1050 belongs
on your ‘must evaluate’ list.”
RCC-1055
RX-1050
Model Number
Disc Capacity
Frequency Response
Amplitude Linearity
Phase Linearity
Signal / Noise Ratio
Dynamic Range
Channel Separation (1kHz)
THD + Noise (at 1kHz)
IM Distortion
Max Audio Line Output
Digital Output Level (coax)
Digital Output Impedance
Power Consumption
Dimensions (W x H x D)
Front Panel Height
Weight
RCC-1055
5
20-20kHz (+/- 0.5dB)
±1dB
±0.5°
>100dB
>96dB
>98dB
0.0045%
0.0045%
2VRMS
0.5Vpp
75 ohms
15 Watts
433 x 121 x 387mm
17³⁄₈ x 4³⁄₄ x 15¹⁄₄”
5.7 kg / 12.6 lbs.
Model
Stereo
Surround Sound
FL/FR
C
LR/RR
Freq. Response (front)
at 8 ohms, all channels driven
THD (front, 1kHz)
IM Distortion (60 Hz:7 kHz)
S/N Ratio IHF A (stereo)
Input Impedance
Output Voltage
Frequency Response
S/N Ratio
Input/Output Impedance
Output Voltage (75 ohm)
Tuner
FM S/N Ratio (@65dBf)
FM Usable Sens. (mono)
0.05%
<0.05%
92dB
47k ohms
1V
3Hz - 10MHz(±3)
45 dB
75 ohms
1V
RX-1050 Continued
FM 50 db Quieting (75 )
mono
stereo
FM Harmonic Distortion
(65dBF/1kHz)
FM Capture Ratio
Alt Chan. Selectivity
Spurious Response Ratio
IF Response Ratio
Stereo Separation
(100Hz/1kHz/10kHz)
AM Sensitivity
AM Selectivity
Miscellaneous
Power Consumption
Dimensions (W x H x D)
70 dBf
14.2 dBf
Front Panel Height
Weight (net)
RX-1050
100 watts/channel
—
—
—
—
10Hz-70kHz (+/- 3dB)
—
20.2 dBf
45.3 dBf
0.3% (mono)
0.5% (stereo)
2.0 dB
47 dB (±400 kHz)
80 dB
80dB
—
40/45/35dB
500 µV/m
25dB
—
300 watts
433 x 121 x 359mm
17 x 4³⁄₄ x 14¹⁄₈”
109 mm, 4.3"
10.3 kg/22.7 lb.
25
RT-02 Tuner
RCD-02 CD Player
The RT-02 AM/FM tuner combines outstanding
The RCD-02 single disc CD player will redefine
sound quality and convenience. In keeping with
your sonic expectations. Utilizing circuits originally
Rotel tradition, the RT-02 includes custom-wound
developed for reference-class CD players, the RCD-
transformers, high grade power supply parts and
02 uses a sophisticated over-scanning disc mecha-
refined circuitry. The RT-02 will bring in clear
nism and a remarkable Burr-Brown IC that provides
signals even under demanding conditions. Thirty
advanced digital filtration, HDCD decoding, and
presets allow quick recall of your favorite broad-
D/A conversion. The analog stage combines the
casts and it is completely compatible with US and
advantages of “minimalist” design with meticulous
European FM broadcast standards. The RT-02 also
parts selection. The power supply features a Rotel-
includes RDS (Radio Data System) enhancements*
manufactured highly efficient transformer and quick-
so you can see your favorite station’s call letters,
response storage capacitors for detailed, revealing,
the type of program material, as well as search for
yet non-fatiguing sound. A coaxial digital output
other stations carrying similar programming. An IR
supplements the analog outputs. A high-density
and 12 volt input add to the tuner’s versatility. The
FL display, total programming capability, IR, 12 volt
RT-02 is the height of listening convenience and
inputs, and remote control complete the picture.
enjoyment.
* RDS functions determined by your local radio stations.
RA-02 Integrated Amplifier
A thoroughly modern classic, the RA-02 adds the
convenience of remote control to one of the most
praised integrated amplifier circuits ever developed.
Power output (40 watts RMS x 2) is more than adequate for all but the largest rooms. High damping
factor assures positive loudspeaker control.
In addition to a high efficiency Rotel custom-made
toroidal transformer, the power supply includes lowESR British-made capacitors specifically designed
for enhanced resolution. A system remote control,
infrared repeater connections, A/B speaker terminals, five line-level inputs and a MM phono input,
independent Listen/Record selectors, headphone
jack, and a 12 volt “trigger” that provides remote
turn-on/turn-off of components complete this exceptional product.
RA-01 Integrated Amplifier
Also available, but not pictured, the RA-01 is a
non-remote controlled version of the RA-02.
Euro Series: Tuner, CD Player, Integrated Amplifier
RCD-02
What Hi Fi September 2002
“The Rotel is one of those players
that can’t help but bring a smile
to the face – it’s a breath of fresh
air.”
RT-02
RA-02
Hi Fi Choice September 2002
“It may not look like the Rotel’s
of old but it’s lost none of their
charm and if you’re serious about
music the RA-02 will show you the
RCD-02
fun side.”
RA-02
Hi Fi + Product of the year 2003
“Convincing hi-fi is all about balance, and Rotel, past masters at
RA-02
producing budget gear that actually delivers music have hit pay-dirt
with the RA-02.”
Models
Audio
Watts/Channel
all channels driven,
8 ohm load, 20 to 20KHz,
0.03% THD, max.
THD, (20-20kHz)
IM Distortion
Input Sens. / Impedance
phono
line level
Output Level
Frequency Response
Damping Factor
Tone Control
Bass
Treble
S/N Ratio (IHF A)
FM S/N Ratio (@65dBf)
FM Usable Sens. (75 )
RT-02
—
—
—
—
—
—
10-15k Hz (±3dB)
—
—
—
—
73 dBf (mono),
70 dBf (stereo)
14.2 dBf
RT-02 continued
FM 50 db Quieting (75 )
mono
stereo
FM Harmonic Distortion
(65dBF/1kHz)
FM Capture Ratio
Alt Chan. Selectivity
Spurious Response Ratio
IF Rejection Ratio
Stereo Separation
(100Hz/1kHz/10kHz)
AM Sensitivity
AM Selectivity
Power Consumption
Dimensions (W x H x D)
Front Panel Height
Weight (net)
20.2 dBf
45.3 dBf
0.2% (mono)
0.3% (stereo)
2.0 dB
47 dB (±400 kHz)
90 dB
80dB
40 dB/45 dB/35 dB
500 µV/m
25 dB
10 watts
435 x 73 x 334mm
17¹⁄₈ x 2⁷⁄₈ x 13¹⁄₈”
60 mm, 2.4"
3.7 Kg/8.2 lb.
Model Number
Disc Capacity
Frequency Response
Amplitude Linearity
Phase Linearity
Signal / Noise Ratio
Dynamic Range
Channel Separation (1kHz)
THD + Noise (at 1kHz)
IM Distortion
Max Audio Line Output
Digital Output Level (coax)
Digital Output Impedance
Power Consumption
Dimensions (W x H x D)
Front Panel Height
Weight
RCD-02
1
20-20k Hz (±0.5dB)
±0.05dB
±0.5°
>100dB
>96dB
>98dB
0.0045%
0.0045%
2VRMS
0.5Vpp
75 ohms
20 Watts
435 x 73 x 334mm
17¹⁄₈ x 2⁷⁄₈ x 13¹⁄₈”
60 mm. 2³⁄₈"
5.4 kg / 11.9 lbs.
Model Number
Watts/Channel
all channels driven,
unbridged, 8 ohm load
20 to 20kHz, 0.03% THD
THD (20-20,000Hz)
cont. rated power
one-half rated power
one watt per channel
IM Distortion (rated power)
Damping Factor (8 ohms)
Input Sens. / Impedance
Phono (MM)
Line level inputs
Frequency Response
Line Level Input
Phono input
Tone Control
Bass
Treble
S/N Ratio (IHF A Network)
Phono (MM)
Line level inputs
Power Consumption
Dimensions (W x H x D)
Front Panel Height
Weight (net)
RA-02
40 watts/ch
0.03%,
0.03%,
0.03%,
0.03%,
180
max
max
max
max
2.5mV / 47 kohms
150mV / 24 kohms
10-40kHz (+/- 1dB)
20-15kHz (+/- 0.3dB)
±6dB (100Hz)
±6dB (10KHz)
80 dB
100 dB
220 watts
435 x 72 x 334mm
17¹⁄₈ x 2⁷⁄₈ x 13¹⁄₈”
60 mm, 2.4"
17 lbs.
27
The latest addition to the Euro series of components includes classic Rotel performance,
features and styling in an attractive, compact
chassis that can fit anywhere space is at a
premium. The RSDX-02 is a surround-sound
receiver with a built-in DVD player that can
also handle CD’s and MP3 discs for the
ultimate in movie and music convenience.
All movie surround formats are supported
including Dolby Digital, Dolby Pro-Logic II,
DTS.
RSDX-02 follows Rotel’s Balanced Design
philosophy with solid engineering and premium component selection incorporated
throughout to maintain the highest possible performance. The RSDX-02 is rated
at 80 watts RMS (FL, FR, Center, RL, RR at
8 ohms, 20Hz – 20kHz) to ensure realistic
playback dynamics of all your favorite action
movies. The tuner section provides 30 presets to offer instant access to preferred
radio stations. The included RR-1070 remote
gives easy armchair control of all functions.
Euro Series: RSDX-02 DVD Receiver
Amplifier
Output power
In stereo operation:
Front channels:
In surround operation:
Front channels:
Center channel:
Surround channel:
Audio
Audio input sensitivity/
Impedance (1 kHz):
Audio input (Digital In)*
80 watts per channel, minimum RMS into 8Ω
40 Hz – 20kHz with no more than0.8% T.H.D.
80 watts per channel, minimum RMS into 8Ω
@ 1 kHz with no more than 0.8% T.H.D.
80 watts per channel, minimum RMS into 8Ω
@ 1 kHz with no more than 0.8% T.H.D.
80 watts per channel, minimum RMS into 8Ω
@ 1 kHz with no more than 0.8% T.H.D.
TV, Tape / CDR, DBS, VCR: 240mV/47kΩ
Coaxial:
Digital 1 (DBS): 0.5V (p-p)/74Ω
Optical:
Digital 2 (TV): -21dBm to –15 dBm
(660 nm + 30nm
*Corresponding to linear PCM, Dolby Digital and DTS
Surround (with sampling frequency –32kHz, 44.1 kHz, 48kHz)
Signal to noise ratio
(’66 IHF / ’78 IHF):
TV, Tape / CDR, DBS, VCR:
Frequency response (8Ω): TV, Tape / CDR, DBS, VCR:
Tone control:
Bass (100 kHz)
Treble (10 kHz)
Video
Video input sensitivity / impedence (1 kHz):
Composite video
DBS IN, VCR IN:
S-video
DBS IN, VCR IN: ( Y: luminance)
( C: chrominance)
Video output level / impedence (1 kHz):
Composite video:
VCR OUT, MONITOR OUT:
S-video:
VCR OUT, MONITOR OUT:
( Y: luminance)
( C: chrominance)
Component video:
DVD COMPONENT VIDEO OUT
( Component Y)
(Component PB. PR)
Europe: SCART video inputs / outputs
87dB / 67 dB
20 Hz – 20kHz (+ 1 dB)
+ 10 dB + 2 dB
+10 dB + 2 dB
1 V (p-p) / 75Ω
1 V (p-p) / 75Ω
0.286 V (p-p) / 75 Ω
FM tuner (IHF):
AM tuner
General
Tuning range
Tuning range
Power requirements
Power consumption
87.5 Mhz – 108.0 Mhz
530 kHz – 1710 kHz
AC 120V / 60Hz
200 watts / 255 VA (In opera-
Dimensions
2 watts (in standby mode)
435mm x 100 mm x 403.5 mm
17-3/16 x 3-15/16 x 15-15/16
Weight
8.4 kg (18.5 lbs)
tion)
inches
1 V (p-p) / 75Ω
1 V (p-p) / 75Ω
0.286 V (p-p) / 75 Ω
1.0 V (p-p) / 75Ω
0.7 V (p-p) / 75Ω
29
Back Panels
RSP-1098 Surround Sound Processor
RSX-1067 Surround Sound A/V Receiver
31
www.rotel.com
Rotel of America
The Rotel Co. Ltd.
Rotel Europe
54 Concord Street
Bunzan Shinsen-Bldg.4F
Dale Road
N. Reading, MA 01864
10-10 Shinsen-Cho
Worthing
Phone: 978.664.3820
Shibuya-Ku, Tokyo 150, Japan
West Sussex BN11 2BH
Fax: 978.664.4109
Phone: 03.5458.5325
United Kingdom
Fax: 03.5458.5310
Phone: +44 (0)1903 221 600
Fax: +44 (0)1903 221 525