www.edelbrock.com

WHY YOU NEED EDELBROCK GASKETS
Any gasket can create a seal, but a good gasket can do it with less clamping force,
and for a longer period of time. Edelbrock’s gaskets are not only manufactured from
extremely high quality materials,
but they’re also designed
specifically to fit our intakes
and cylinder heads, so there’s
no chance that our gaskets will
interfere with the operation
of either component. These
gaskets also work with most
stock cylinder heads and intakes,
aluminum or cast-iron, as well as
other aftermarket components.
Top quality Edelbrock gaskets
Complete Head Gasket Set for Small-Block Ford
ensure a perfect seal every time.
COMPLETE HEAD GASKET SETS
Edelbrock head gaskets are matched to Edelbrock performance cylinder heads to
provide the best sealing solution and optimal performance. These complete sets
include every gasket you need for installation — head, intake, exhaust, valve cover
(except LT1 & LT4), distributor, and thermostat housing gaskets.
CYLINDER HEAD GASKETS
Edelbrock head gaskets provide the best sealing solution and are matched to
Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry
leading head gasket manufactures to ensure our head gasket sets will provide the
best fit and sealing properties when used with Edelbrock aluminum cylinder heads.
Edelbrock head gaskets are manufactured from high-density materials and feature
a superior design that performs under pressure and provides a long-lasting seal,
without re-torqueing.
GASKET APPLICATION REFERENCE GUIDE
Year & Model
AMC/JEEP
1967-69 290-390;
1970-91 290-304-343; 360-390-401
Edelbrock Exhaust Gaskets are made of EnCore™ HTX-900; a high-density nonasbestos fiber/metal core composite material consisting of two graphite coated,
heat resistant fiber blended sheets that are mechanically and chemically fused
to an expanded steel core. The finished product provides high heat resistance,
excellent load retention and unmatched sealing performance on exhaust manifold
and header applications. A 50% recovery rate allows for gasket expansion in the
event your header loses the proper header bolt torque. Edelbrock exhaust gaskets
are an Edelbrock product.
VALVE COVER GASKETS
Fabricated from performance CRC (core-reinforced-composite), Edelbrock Valve
Cover Gaskets provide excellent sealing integrity and conformability for easy
installation. The multi-layer construction has two highly compressible, high rubber
content, fiber-reinforced outside layers which are chemically bonded to a high
strength composite core. This unique core-reinforced construction has a radial
strength to resist high-vacuum or blow-out conditions. Edelbrock valve cover
gaskets are an Edelbrock product.
Head Gasket
Specs
Intake
Gaskets
Intake Gasket
Specs
Exhaust
Gaskets
Port Size
Valve Cover
Gaskets
Valve Cover
Gasket Thickness
#7372
#7329
4.275" bore
0.045" compressed
10.60cc volume
#7213
port 1.13" x 2.21"
0.060" thickness
#7239
1.80" x 1.30"
#7532
1/4"
#7369
#7346
4.400" bore
0.050" compressed
12.50cc volume
#7246 (C)
port 1.15" x 2.38"
0.032" thickness
#7247
1.20" x 1.63"
#7546
3/16"
—
—
—
#7209
—
—
—
—
#7201
#72018
#7204
1.50" x 1.50"
#7549
5/16"
#7204
1.50" x 1.50"
#7549
5/16"
—
—
—
—
—
—
—
—
#7204
1.50" x 1.50"
#7549
5/16"
#7204
1.50" x 1.50"
#7549
5/16"
#7204
1.50" x 1.50"
#7549
5/16"
#7204
1.50" x 1.50"
#7549
5/16"
1958-1986
302-327-350 S/B
#7361
#7310
4.125" bore
0.039" compressed
8.70cc volume
1958-1986 400 S/B
—
—
—
#7201
Edelbrock 23° S/B Victor Jr.
and Victor High-Port Intakes
Edelbrock 18° S/B Victor Jr.
and Victor High-Port Intakes
—
—
—
#7217 (K)
—
—
—
#7218 (K)
#7235 (C)
#72358
1958-1986
E-Tec 170 302-327-350 S/B
#7367
#7310
1958-1986
E-Tec 200 302-327-350 S/B
4.125" bore
0.039" compressed
8.70cc volume
—
#7310
—
#7215 (C)
1958-1986 E-Tec 170 400 S/B
—
—
—
#7235 (C)
#7310
4.125" bore
0.039" compressed
8.70cc volume
#7206 (E)
#72078 (E)
1958 & Later
S/B Vortec Bowtie
EXHAUST GASKETS
Head
Gaskets
CHEVROLET
1985-95 V6
200-229-262 (3.8 and 4.3L)
Matched to Edelbrock Performer, Performer RPM and Victor Jr. cylinder heads
and manifolds, our Intake Gaskets allow for optimum flow and performance. The
new MP-2N Micropore® technology does not use solvents making our gaskets
environmentally friendly. Impervious to most chemicals, this synthetic fiber
composite provides a high recovery under load. This means that when compressed,
the gasket will conform to any imperfections on the sealing surface even using
lower flange pressures. A nitrile bead around each port opening makes the seal
even better. Edelbrock intake gaskets are an Edelbrock product.
Head Gasket
Sets (A)
BUICK
1967-76 400-455
INTAKE GASKETS
—
port 1.28" x 2.10"
0.060" thickness
1.28" x 2.09"
0.060" thickness
Set of (10 pr.) #7201
port 1.28" x 2.09"
0.060" thickness
port 1.31" x 2.02"
0.060" thickness
port 1.23" x 2.13"
0.060" thickness
port 1.08" x 2.11"
0.120" thickness
Set of (10 pr.) #7235
port 1.26" x 2.24"
0.120" thickness
port 1.08" x 2.11"
0.120" thickness
port 1.14" x 2.20"
0.060" thickness
Set of (10 pr.) #7206
SEE REVERSE SIDE FOR MORE LISTINGS AND IMPORTANT FOOTNOTES
Edelbrock, LLC.
Torrance, CA 90503 • USA
www.edelbrock.com
Tech Line: 800-416-8628
7am-5pm PST, Monday-Friday
Call 800-FUN TEAM for a full line catalog
Year & Model
CHEVROLET
1958 & Later
S/B Vortec Bowtie
Head Gasket
Sets (A)
Head Gaskets
—
#7310
#7380 (LT1)
#7379 (LT4)
#7342
—
#7388 (LS1)
#7387 (LS2)
1958-65
348/409 “W-Series"
#7378
#7359
1965-90 Rectangular Port
Mark IV, 396-402-427-454 B/B
#7362
#7302
—
—
1965-90 Oval Port
Mark IV, 396-402-427-454 B/B
#7363
#7302
1991 & later Rectangular Port
Gen V & VI, 454 B/B
#7376
#7375
1991 & later Rectangular Port
Gen V & VI, 502 B/B
#7389
#7356
Edelbrock Big Victor B/B
Spread Port Cylinder Heads
—
—
1966-87
318-340-360
#7370
#7326
1992 & Later Magnum
#7371
#7327
1958-1979, 361-383-400,
413-426 [except HEMI],
and 440 engines
#7366 (B)
#7325
#7349
#7347
1938-48 Ford/Mercury Flathead
1949-53 Ford/Mercury Flathead
#7384
#7383
#7393
#7394
1963-96, 289, 302 S/B [except Boss],
1982-96, 5.0L & 5.8L 351W
#7364
#7313 (J)
—
—
1992-1997
LT1/LT4
1997 & Later
LS1/LS2
1965-90 Rect. Port 6 Bolt Flange
with No Crossover
Mark IV, 396-402-427-454-555 B/B
CHRYSLER
426-572 HEMI engines (Gen II)
FORD
Edelbrock Victor Jr. Cylinder
Heads without Heat Crossover
Head Gasket
Specs
4.125" bore
0.039" compressed
8.70cc volume
4.100" bore
0.052" compressed
11.50cc volume
3.920" bore (LS1)
0.051" compressed (LS1)
4.080" bore (LS2)
0.051" compressed (LS2)
4.500" bore
0.0435" compressed
12.20cc volume
4.370" bore
0.039" compressed
9.70cc volume
—
Intake
Gaskets
Valve Cover
Gasket
Thickness
#7204
1.50" x 1.50"
#7549
5/16"
#7248
1.385" x 1.400"
(D shaped)
—
—
#7243 (LT1)
#7244 (LT4)
#7386
(Set of 8 o-rings)
—
—
—
—
#7240 (G)
#7242 (I)
port 2.50" x 1.31"
0.060" thickness
#7241 (F)
1.813" x 1.75"
#7582
5/16"
#7202
port 1.82" x 2.54"
0.060" thickness
#7205
1.940" (round)
#7580
5/16"
#7208 (C)
port 1.82" x 2.46"
0.060" thickness
—
—
—
—
#7203
port 1.82" x 2.05"
0.060" thickness
#7205
1.940" (round)
#7580
5/16"
#7202
port 1.82" x 2.54"
0.060" thickness
#7205
1.940" (round)
#7580
5/16"
#7202
port 1.82" x 2.54"
0.060" thickness
#7205
1.940" (round)
#7580
5/16"
#7245
port 2.02" x 2.635"
0.060" thickness
—
—
#7559
0.130"
#7276
port 1.17" x 2.30"
0.060" thickness
#7236
1.75" x 1.25"
#7592
3/16"
#7277
port 1.18" x 2.18"
0.060" thickness
#7237
1.50" x 1.20"
#7593
5/16"
#7225 (B)
port 1.23" x 2.27"
0.030" thickness
#7226
1.84" x 1.33"
#7591
3/16"
#7278
port 2.00" x 1.84"
0.060" thickness
#7279
1.840" x 1.740"
#7589
1/4"
—
port 1.35" x 2.00"
0.062" thickness
port 1.20" x 2.00"
0.060" thickness
Set of (10 pr.) #7220
port 1.28" x 2.10"
0.060" thickness
—
—
—
—
#7227
1.25" x 1.48"
#7560
5/16"
—
—
—
—
#7265
port 1.52" x 2.16"
0.060" thickness
#7262
1.98" x 1.56"
#7569
1/4"
#7265
port 1.52" x 2.16"
0.060" thickness
#7262
1.98" x 1.56"
#7569
1/4"
#7224
port 1.40" x 2.10"
0.060" thickness
#7229
1.40" x 2.04"
#7568
5/16"
#7223 (D)
port 1.98" x 2.26"
0.060" thickness
#7228
1.50" x 2.10"
#7563
5/16"
3.187" bore
3.420" bore
4.100" bore
0.045" compressed
9.8cc volume
#7220
#72208
—
#7219
4.100" bore
0.047" compressed
10.20cc volume
4.080" bore
0.038" compressed
8.10cc volume
4.400" bore
0.038" compressed
9.90cc volume
4.500" bore
0.048" compressed
12.5cc volume
Port Size
Valve Cover
Gaskets
Exhaust
Gaskets
port 1.14" x 2.20"
0.120" thickness
Set of (10 pr.) #7207
port 2.1" x 1.265" (LT1)
port 2.3" x 1.25" (LT4)
0.060" thickness
#7207 (E)
4.370" bore
0.038" compressed
10.05cc volume
4.370" bore
0.038" compressed
10.05cc volume
4.540" bore
0.039" compressed
10.05cc volume
4.180" bore
0.050" compressed
11.20cc volume
4.140" bore
0.048" compressed
10.70cc volume
4.505" bore
0.038" compressed
9.69cc volume
4.590" bore
0.051" compressed
14cc volume
Intake Gasket
Specs
#7234
302 E-Boss and
351W E-Boss (Clevor) Conversions
#7377
#7341 (H)
1970-74 351 Cleveland
#7374
#7328
1958-76 390-428 FE
#7368
#7337
1968-1987
429/-460 B/B
#7365
#7314
#7350
#7348
4.005" bore
0.042" compressed
8.88cc volume
#7275
port 1.67" x 1.38"
0.060" thickness
—
1.66" (round)
#7583
5/32"
#7373
#7340
4.250" bore
0.042" compressed
9.8cc volume
#7284
port 1.44" x 2.44"
0.060" thickness
#7238
1.95" x 1.56"
#7598
1/4"
#7382
#7381
4.300" bore
0.038" compressed
8.96cc volume
#7280
port 1.18" x 2.20"
0.060" thickness
#7281
1.880"
#7590
3/16"
JEEP
1987-2006
4.0L Inline Six
OLDSMOBILE
1965-76
400-425-455
PONTIAC
1961-1979
326-389-400-421-428-455
Important Footnotes
(A)Does not include end seals; Edelbrock recommends
the use of silicone sealant in place of end seals
(B)Must be used with OE-style valley pan
(C)Does not have embossed silicone bead
(D)Does not fit CJ or SCJ
(E) For use with Bowtie Vortec #2814 intake
(F) For use with large port applications, including
Edelbrock RPM heads #60809/#60819, will not
fit factory heads
(G)For use with large port applications only
(H)For use with Edelbrock RPM heads #61689 & #61699
(I) For use with small port applications only
(J) Graphite style
(K)Gasket is trim-to-fit for port matching
EDELBROCK, LLC
Torrance, CA 90503 USA
Tech Line: 800-416-8628, 7am-5pm PST, M-F
Call 800-FUN TEAM for a full line catalog
or visit www.edelbrock.com
©2015 EDELBROCK, LLC REV 01/15 • FLYER #0333