DEHORNING - CastRatION

Transcription

DEHORNING - CastRatION
DEHORNING - Castration
WARRANTY 12 months
STERIBUD rechargeable
dehorner
STERIBUD allows the operator to obtain
a more effective result quicker and easier
than ever before. Traditional electric or gas
dehorners require electrical cables or force
the user to wait for the unit to heat up and
can be erratic in windy or cold conditions.
STERIBUD is almost instantaneously ready
to operate thanks to a state of the art microprocessor which electronically controls temperature and cycle time.
Thanks to a new Li-ion battery, the STERIBUD
dehorner is capable of dehorning over 100
calves (200 horns) on a single charge! The
STERIBUD maintains a consistent heat of
1200 ° F for an optimum cycle time of 7.5
seconds. Sound and light indicators tell you
when the dehorning cycle is complete. The
bud is then perfectly seared.
103C 032
Rinehart X50 dehorner
The X-50 will maintain the proper temperature needed for multiple dehorning in
succession and should be recommended to
your commercial or larger herd.
The X-50 is thermostatically controlled and
will withstand the vigorous demands that
industrial farms put them through.
103C 050
[email protected] Fax : 450-796-1415
17
dehorning
for cattle and goats
Température 650 C° max
WARRANTY 12 months
PORTASOL gas dehorner
Delivered in a sturdy case
103C 838
45 min
gas reserve.
Butane for dehorner
200 ml.
103 011
18
www.ukalcanada.com tel: 800-665-8389
for calf
BARNES dehorner
Dehorning paste
Used on calves up to three months.
handle, 13"
103 307 002
handle, 17"
103 307 003
Dehorning paste for calves aged from 8
to 30 days. Delivered with an application
stick. Caution : corrosive product, to be
used carefully. Keep out of the reach of
children.
103 306
6. Dehorning caustic stick
For the dehorning of calves younger than
3 weeks. Corrosive substance, to use with
precaution.
103 305
for cattle
!
WARNING
Dehorning saw wire 12 m
For dehorning adult cattle. Its very
strong and is to be used with the dehorning wire handles ref 103 312.
103 311
Dehorning wire handle
Sweedish dehorning saw wire
Dehorning wire handles to be used 10 m
with dehorning wires ref 103 311 and Veterinary quality
103 310. Delivered by pairs.
103 310
103 312
DEHORNING OF ADULT CATTLE
the dehorning of adult cattle must be
done only in case of emergency (broken Horn After an accident, or agressive
animals...), or in case of arrival of a new
animal with other dehorned ones. But in
any case ask your veterinary for advice.
[email protected] Fax : 450-796-1415
19
castration
for cattle, sheep, goat, pig and rabbit
rubber ring applicators
Rubber ring applicator
Wide opening for easy application.
Nickel-plated steel.
Very resistant. High quality model!
102 201
Rubber ring applicator,
standard quality
Economical model
102 200
Castration rings
Rubber rings used for tail
castration. Premium quality
orange - bag of 100
orange - bag of 500
green - bag of 100
green - bag of 500
docking and
102 202 100
102 202 500
102 202 001
102 202
tail docking advices
Why do we cut the tail ?
For many hygienic reasons, when changing
their feeding. (grass growth, nitrates excess)
diarrhoea might appear, and make the tail
dirty, attacting any kind of insects.
Cutting the tail of female and male destinated to reproduction is also important.
For those, we’ll let just one small part of the
tail, in order to cover the female vulva, or
20
the male anus. That will help them to get
the insects away.
Tail docking must be done on young and
healthy animals (before 15 days).
Use clean and disinfected material.
Disinfect the wound.
Keep an eye on the healing, and in any case
of problem call your veterinary
www.ukalcanada.com tel: 800-665-8389
2 Techniques
1. Place a rubber ring. It will interrupt the
blood irrigation of the tail, causing the
necrosis and the tail fall. (8-15 days long).
A method without blood, but needs a
regular healing check. Recommended for
young animals ( ideal at 2-3 days)
2. Hemostatic tail docking. The applicator
has 2 sides, one smooth and sharpered,
which cuts the tail, and one grooved, wich
crushes the blood vessel and prevent the
bleeding.
bloodless castrators
23 cm
Delivered
with a tightning key.
Bloodless castrators
Made of High qualtiy forged steel.
Delivered with a tightening key.
The safest, quickest and cleanest way to
castrate all ages of farm stock.
You must proceed by crushing one testicular cord at a time, and make two
chrushes at 1-2 cm (1/2’’ - 3/4’’) apart.
-Identify the testicular cord.
-Block it with the castrator for 5 minutes.
-Repeat the same operation 1-2 cm (1/2’’
to 3/4’’) lower on the same cord. (The noncrushed space maintain the irrigation and
prevents from gangrene.)
-Execute these operations on the second
testicular cord.
-Never try to crush simultaneously both
testicular cords. It may be uneffective and
it will damage the castrators.
23 cm - 9 in. for lambs. 40 cm - 15.8 in for calves
and horses
48 cm - 19 in for bulls
and horses
40 cm
102 223 023
102 223 040
102 223 048
48 cm
castration advices
3 Techniques:
1. Place a rubber ring. It will interrupt the
blood irrigation of the testicle, causing the
necrosis and the testicle fall.
Place the ring, only once the testicle are
down in the scrotum. This method is used
only for lambs before 3 weeks.
Disinfect the wound
2. Hemostatic emasculator, bloodless
castrator cut the testicle cord, and crush
the blood vessel, avoiding the bleeding.
Use this kind of equipment only on
young lambs (before 3 weeks) Use clean
and disinfected material.
Disinfect the wound after castration.
3. Bloodless castrators crush the testicle
cord. Technic without wound, to be
use after testicle maturation and up
to 6 months.
!
WARNING
Castration by means of bloodless castrator does
not always inhibit the procreation reflexes. In case
of any doubts, isolate the animal and repeat the
castrating process.
[email protected] Fax : 450-796-1415
21
scalpels and blades
Scalpel handle
Can be sterilized.
By piece.
n° 3
n° 4
n°10
n°11
n°12
n°15
n°20
n°21
n°22
n°23
102 203
102 204
n°24
box of 100
Sterile surgical scalpel blades
100 pieces.
Used with n°3 scalpel handle
blade n°10
102 206 110
blade n°11
102 206 111
blade n°12
102 206 112
blade n°15
102 206 115
Straight emasculators
For lambs and piglets
19,5 cm
n°22
102 209
tail dockers
for lamb and piglets
Hemostatic tail docker
For heavy lambs and piglets. Steel
construction.
Cuts the tail cleanly and clots the blood
when crushing the blood vessels.
straight 27 cm
102 212 027
22
www.ukalcanada.com tel: 800-665-8389
Scalpel blades n°22
Box of 10.
102 206 022
Used with n°4 scalpel handle
blade n°20 102 206 120
blade n°21
102 206 121
blade n°22
102 206 122
blade n°23
102 206 123
blade n°24
102 206 124
butane tail docker
STERICUT gas tail docker
For tail amputation of newborn
piglets (3 to 4 days old). The blade is
heated at 400°, therefore cauterizing
the wound while cutting the tail. No
bleeding.
Heavy-duty. Easy to use.
Rechargeable.
102 211
Replacement blade for
gas tail docker
Sold by unit.
Not shown.
102 211 001
Cylinder replacement
902C3002
Replacement spring
902C3007
Replacement cartridge
holder
902C0121
Replacement holder
902C0125
Replacement blade
support
902C0126
Replacement anvil
902C0135
Butane for gas tail docker
200 ml
103 011
[email protected] Fax : 450-796-1415
23