mmscat03c 1955KB Jun 22 2010 11:08:06 PM

mmscat03c 1955KB Jun 22 2010 11:08:06 PM

Performance & Racing Engine Components
WORLD LEADER IN
PISTON TECHNOLOGY
MAHLE is the world's leading manufacturer of high quality performance
pistons and engine components. With a long heritage in Formula1 and
other high profile race series worldwide, it was a natural evolution to
introduce a line of products to the North American market. A new division,
MAHLE Motorsport, was formed in 2000 to develop performance piston
and related components specifically designed for all US racers and
performance enthusiasts.
The motorsports division of the MAHLE Group is supported by close
proximity to a 510,000 sq. feet manufacturing facility located in
Morristown, TN. The MAHLE Motorsport line of products capitalizes on
the successful research and development of performance pistons created
for international racing and some of the world's premiere performance
vehicles. Groundbreaking R&D continues today with results proven on
racetracks around the world.
With an 80 plus year history of innovation and racing experience, no other
brand can claim to have won more races in more countries over a greater
extent of time than MAHLE.
MAHLE
MAHLE Innovation.
Innovation Tomorrow’s Standard.
TABLE OF CONTENTS
PowerPak Pistons
1-8
ProSeries Pistons
9-18
Accessories
19
Custom Pistons
20
Porsche Pistons
21
Performance Rings
22-24
Terms & Conditions/Warranty
Back Cover
PowerPak
Performance
Rings Included
The MAHLE PowerPak is a
complete, race proven piston
assembly kit composed of hand
deburred, forged, performance
coated pistons, high quality steel
pins, round wire locks and low drag
performance rings.
Performance coatings include a
phosphate dry lubricant that is
used to protect against ring
micro-welding and pin galling
during initial startup and break in.
For added performance, MAHLE
applies its proprietary Grafal® antifriction coating to each piston skirt.
Deburred, Pinfitted, No
Additional Prep Work
Required
Proprietary Grafal®
Anti-Friction Coating
DID YOU KNOW M A H L E b u i l t t h e w o r l d ’s f i r s t a l u m i n u m a l l o y p i s o n i n 1 9 2 1.
Phosphate Coating
™
The MAHLE PowerPak is now available for
most popular performance applications in
a variety of bore, strok e and crown
combinations. The PowerPak is bringing a
new level of performance, ease of use and
value to Sportsman level racing and
performance enthusiasts.*
*These pistons are designed primarily for off
highway use. Check state and federal
law and emission regulations.
1
350 CHEVROLET FLAT TOP
• Forged from 4032 high silicone low expansion aluminum alloy
for high strength and reduced piston to wall clearance
• Radiused valve pockets
• Forced pin oiling
• Precision pin fitting and easy to use round wire locks included
• .927” high quality steel wrist pin (118 grams) included
• Precision ring grooves for INCLUDED 1.5, 1.5, 3.0mm rings
Bore
4.030
4.040
4.060
4.030
4.040
4.060
4.030
4.040
4.060
4.030
4.040
4.060
4.030
4.040
4.060
Stroke
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.750
3.750
3.750
3.750
3.750
3.750
Rod
Length
5.7
5.7
5.7
6.0
6.0
6.0
6.125
6.125
6.125
5.7
5.7
5.7
6.0
6.0
6.0
Pin
Dia.
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
Comp.
Height
1.550
1.550
1.550
1.250
1.250
1.250
1.125
1.125
1.125
1.425
1.425
1.425
1.125
1.125
1.125
Dome
Volume
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
Weight
Grams
464
468
474
429
433
440
406
409
414
451
456
461
406
409
414
C/R
64cc
10.6
10.6
10.6
10.6
10.6
10.6
10.6
10.6
10.6
11.3
11.3
11.3
11.3
11.3
11.3
Part Number
SBC550030F05
SBC550040F05
SBC550060F05
SBC250030F05
SBC250040F05
SBC250060F05
SBC125030F05
SBC125040F05
SBC125060F05
SBC425030F05
SBC425040F05
SBC425060F05
SBC125030F05
SBC125040F05
SBC125060F05
400 CHEVROLET FLAT TOP
• Forged from 4032 high silicone
low expansion aluminum alloy for
high strength and reduced piston
to wall clearance
• Radiused valve pockets
• Forced pin oiling
Bore
4.125
4.145
4.155
4.165
4.125
4.145
4.155
4.165
4.125
4.145
4.155
4.165
4.125
4.145
4.155
4.165
4.125
4.145
4.155
4.165
2
Stroke
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
Rod
Length
5.7
5.7
5.7
5.7
6.0
6.0
6.0
6.0
6.125
6.125
6.125
6.125
5.7
5.7
5.7
5.7
6.0
6.0
6.0
6.0
• Precision pin fitting and easy to
use round wire locks included
• .927” high quality steel wrist pin
(118 grams) included
• Precision ring grooves for
INCLUDED 1.5, 1.5, 3.0mm rings
Pin
Dia.
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
1-888-255-1942
Comp.
Height
1.550
1.550
1.550
1.550
1.250
1.250
1.250
1.250
1.125
1.125
1.125
1.125
1.425
1.425
1.425
1.425
1.125
1.125
1.125
1.125
Dome
Volume
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
-5cc
Weight
Grams
485
491
496
503
451
457
460
463
438
445
448
452
466
472
477
483
438
445
448
452
www.mahlemotorsports.com
C/R
64cc
11.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
11.8
11.8
11.8
11.8
11.8
11.8
11.8
11.8
Part Number
SBC550125F05
SBC550145F05
SBC550155F05
SBC550165F05
SBC250125F05
SBC250145F05
SBC250155F05
SBC250165F05
SBC125125F05
SBC125145F05
SBC125155F05
SBC125165F05
SBC425125F05
SBC425145F05
SBC425155F05
SBC425165F05
SBC125125F05
SBC125145F05
SBC125155F05
SBC125165F05
350/400 CHEVROLET DOME
• Forged from 4032 high silicone low expansion aluminum
alloy for high strength and reduced piston to wall clearance
• Radiused valve pockets
• Forced pin oiling
• Precision pin fitting and easy to use round wire locks included
• .927” high quality steel wrist pin (118 grams) included
• Precision ring grooves for INCLUDED 1.5, 1.5, 3.0mm rings
Bore
4.030
4.040
4.060
4.030
4.040
4.060
4.030
4.040
4.060
4.030
4.040
4.060
4.030
4.040
4.060
4.125
4.145
4.155
4.165
4.125
4.145
4.155
4.165
4.125
4.145
4.155
4.165
4.125
4.145
4.155
4.165
4.125
4.145
4.155
4.165
4.125
4.145
4.155
4.165
4.125
4.145
4.155
4.165
4.125
4.145
4.155
4.165
4.125
4.145
4.155
4.165
4.125
4.145
4.155
4.165
Stroke
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.750
3.750
3.750
3.750
3.750
3.750
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.480/3.500
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
Rod
Length
5.7
5.7
5.7
6.0
6.0
6.0
6.125
6.125
6.125
5.7
5.7
5.7
6.0
6.0
6.0
5.7
5.7
5.7
5.7
5.7
5.7
5.7
5.7
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
5.7
5.7
5.7
5.7
5.7
5.7
5.7
5.7
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
1-888-255-1942
Pin
Dia.
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
.927
Comp.
Height
1.550
1.550
1.550
1.250
1.250
1.250
1.125
1.125
1.125
1.425
1.425
1.425
1.125
1.125
1.125
1.550
1.550
1.550
1.550
1.550
1.550
1.550
1.550
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.425
1.425
1.425
1.425
1.425
1.425
1.425
1.425
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
Dome
Volume
11cc
11cc
11cc
11cc
11cc
11cc
11cc
11cc
11cc
11cc
11cc
11cc
11cc
11cc
11cc
4cc
4cc
4cc
4cc
11cc
11cc
11cc
11cc
4cc
4cc
4cc
4cc
11cc
11cc
11cc
11cc
4cc
4cc
4cc
4cc
11cc
11cc
11cc
11cc
4cc
4cc
4cc
4cc
11cc
11cc
11cc
11cc
4cc
4cc
4cc
4cc
11cc
11cc
11cc
11cc
Weight
Grams
501
505
513
465
468
474
444
448
454
484
489
496
444
448
454
508
514
518
522
528
534
538
542
471
478
482
486
491
498
501
504
454
459
462
465
467
473
477
481
496
501
504
507
504
508
512
516
454
459
462
465
467
473
477
481
www.mahlemotorsports.com
C/R
64cc
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
14.0
14.0
14.0
14.0
14.0
14.0
12.4
12.4
12.4
12.4
13.4
13.5
13.5
13.6
12.4
12.4
12.4
12.4
13.7
13.7
13.7
13.7
12.4
12.4
12.4
12.4
13.7
13.7
13.7
13.7
13.2
13.2
13.2
13.2
14.7
14.7
14.7
14.7
13.2
13.2
13.2
13.2
14.7
14.7
14.7
14.7
Part Number
SBC550030D11
SBC550040D11
SBC550060D11
SBC250030D11
SBC250040D11
SBC250060D11
SBC125030D11
SBC125040D11
SBC125060D11
SBC425030D11
SBC425040D11
SBC425060D11
SBC125030D11
SBC125040D11
SBC125060D11
SBC550125D04
SBC550145D04
SBC550155D04
SBC550165D04
SBC550125D11
SBC550145D11
SBC550155D11
SBC550165D11
SBC250125D04
SBC250145D04
SBC250155D04
SBC250165D04
SBC250125D11
SBC250145D11
SBC250155D11
SBC250165D11
SBC125125D04
SBC125145D04
SBC125155D04
SBC125165D04
SBC125125D11
SBC125145D11
SBC125155D11
SBC125165D11
SBC425125D04
SBC425145D04
SBC425155D04
SBC425165D04
SBC425125D11
SBC425145D11
SBC425155D11
SBC425165D11
SBC125125D04
SBC125145D04
SBC125155D04
SBC125165D04
SBC125125D11
SBC125145D11
SBC125155D11
SBC125165D11
3
CHEVROLET LS1
• Forged from 4032 high silicone low expansion aluminum alloy for high
strength and reduced piston to wall clearance
• Forced pin oiling
• Precision pin fitting and easy to use round wire locks included
• .927” or .945" high quality steel wrist pin (118 or 125 grams) included
• Precision ring grooves for INCLUDED 1.5, 1.5, 3.0mm rings
Rod
Pin
Comp.
Dome
Bore
Stroke
Length
Dia.
Height
Volume
3.898
3.622
6.098
.945*
1.340
-2cc
3.905
3.622
6.098
.945*
1.340
-2cc
3.898
3.622
6.125
.927
1.314
-2cc
3.905
3.622
6.125
.927
1.314
-2cc
3.898
3.662
6.098
.945*
1.340
-9cc
3.905
3.662
6.098
.945*
1.340
-9cc
3.898
3.662
6.125
.927
1.314
-9cc
3.905
3.662
6.125
.927
1.314
-9cc
* Designed as a "drop in" oversize replacement for the OE
4
1-888-255-1942
Weight
Grams
386
390
390
394
376
380
380
384
piston
www.mahlemotorsports.com
C/R
64cc
10.0
10.0
10.0
10.0
9.8
9.9
9.8
9.9
Part Number
LS1340898F02
LS1340908F02
LS1314898F02
LS1314905F02
LS1340898I09
LS1340905I09
LS1314898I09
LS1314905I09
CHEVROLET BIG BLOCK FLAT TOP
• Forged from 4032 high silicone low expansion aluminum alloy
for high strength and reduced piston to wall clearance
• Radiused valve pockets
• Forced pin oiling
• Precision pin fitting and easy to use round wire locks included
• .990” high quality steel pins (135 grams) included
• Precision ring grooves for INCLUDED 1/16”, 1/16”, 3/16” rings
Rod
Bore
Stroke
Length
4.500
4.000
6.135
4.500
4.250
6.385
4.600
4.250
6.385
Compression Heights shown
Pin
Comp.
Dia.
Height
.990
1.645
.990
1.270R
.990
1.270R
with a "R" INCLUDE
Dome
Volume
-3cc
-3cc
-3cc
Oil Support
Weight
Grams
556
508
545
Rails
C/R
9.0
9.5
9.8
Part Number
BBC645500F03
BBC270500F03
BBC270600F03
C/R
118cc
10.5
10.6
12.5
13.0
10.5
10.6
12.5
13.0
10.5
11.0
13.2
13.7
Part Number
BBC645280D28
BBC645310D28
BBC645280D48
BBC645310D48
BBC395280D28
BBC395310D28
BBC395280D48
BBC395310D48
BBC270500D13
BBC270600D13
BBC270500D38
BBC270500D38
CHEVROLET BIG BLOCK DOME
•
•
•
•
•
•
Forged from 2618 high strength aluminum alloy
Radiused valve pockets
Forced pin oiling
Precision pin fitting and easy to use round wire locks included
.990” High Quality steel wrist pins (135 grams) included
Precision ring grooves for INCLUDED 1/16, 1/16, 3/16 rings
Rod
Bore
Stroke
Length
4.280
4.000
6.135
4.310
4.000
6.135
4.280
4.000
6.135
4.310
4.000
6.135
4.280
4.000
6.385
4.310
4.000
6.385
4.280
4.000
6.385
4.310
4.000
6.385
4.500
4.250
6.385
4.600
4.250
6.385
4.500
4.250
6.385
4.600
4.250
6.385
Compression Heights shown
Pin
Comp.
Dome
Weight
Dia.
Height
Volume
Grams
.990
1.645
28cc
597
.990
1.645
28cc
617
.990
1.645
48cc
649
.990
1.645
48cc
679
.990
1.395
28cc
563
.990
1.395
28cc
583
.990
1.395
48cc
615
.990
1.395
48cc
645
.990
1.270R
13cc
541
.990
1.270R
13cc
581
.990
1.270R
38cc
625
.990
1.270R
38cc
683
with a "R" INCLUDE Oil Support Rails
1-888-255-1942
www.mahlemotorsports.com
5
SMALL BLOCK FORD FLAT TOP
• Forged from 4032 high silicone low expansion aluminum alloy for
high strength and reduced piston to wall clearance
• Radiused valve pockets
• Forced pin oiling
• Precision pin fitting and easy to use round wire locks included
• .927” or .912” high quality steel wrist pin (118 grams or 112 grams) included
• Precision ring grooves for INCLUDED 1.5, 1.5, 3.0mm rings
Rod
Bore
Stroke
Length
4.030
3.000
5.090
4.040
3.000
5.090
4.060
3.000
5.090
4.030
3.250
5.400
4.040
3.250
5.400
4.060
3.250
5.400
4.030
3.250
5.400
4.040
3.250
5.400
4.060
3.250
5.400
4.030
3.400
5.400
4.040
3.400
5.400
4.060
3.400
5.400
4.030
3.400
5.400
4.040
3.400
5.400
4.060
3.400
5.400
4.030
3.500
6.200
4.040
3.500
6.200
4.060
3.500
6.200
4.030
3.500
6.200
4.040
3.500
6.200
4.060
3.500
6.200
4.030
3.850
5.956
4.040
3.850
5.956
4.060
3.850
5.956
4.030
3.850
5.956
4.040
3.850
5.956
4.060
3.850
5.956
4.030
4.000
6.250
4.040
4.000
6.250
4.060
4.000
6.250
4.030
4.000
6.250
4.040
4.000
6.250
4.060
4.000
6.250
4.030
4.100
6.200
4.040
4.100
6.200
4.060
4.100
6.200
4.030
4.100
6.200
4.040
4.100
6.200
4.060
4.100
6.200
Compression Heights shown
6
Pin
Comp.
Dia.
Height
.912
1.600
.912
1.600
.912
1.600
.927
1.165
.927
1.165
.927
1.165
.927
1.165
.927
1.165
.927
1.165
.927
1.090R
.927
1.090R
.927
1.090R
.927
1.090R
.927
1.090R
.927
1.090R
.927
1.245
.927
1.245
.927
1.245
.927
1.245
.927
1.245
.927
1.245
.912
1.600
.912
1.600
.912
1.600
.912
1.600
.912
1.600
.912
1.600
.927
1.245
.927
1.245
.927
1.245
.927
1.245
.927
1.245
.927
1.245
.927
1.245
.927
1.245
.927
1.245
.927
1.245
.927
1.245
.927
1.245
with a "R" INCLUDE
-1-888-255-1942
Dome
Weight
Volume
Grams
-6.6cc
464
-6.6cc
468
-6.6cc
476
0cc
427
0cc
431
0cc
437
-6.6cc
412
-6.6cc
416
-6.6cc
423
0cc
413
0cc
416
0cc
421
-6.6cc
395
-6.6cc
398
-6.6cc
403
0cc
439
0cc
442
0cc
447
-6.6cc
421
-6.6cc
424
-6.6cc
429
0cc
482
0cc
486
0cc
492
-6.6cc
464
-6.6cc
468
-6.6cc
476
0cc
439
0cc
442
0cc
447
-6.6cc
421
-6.6cc
424
-6.6cc
429
0cc
439
0cc
442
0cc
447
-6.6cc
421
-6.6cc
424
-6.6cc
429
Oil Support Rails
www.mahlemotorsports.com
C/R
64cc
9.0
9.0
9.0
10.3
10.3
10.3
9.6
9.6
9.6
10.8
10.8
10.8
10.0
10.0
10.0
11.0
11.0
11.0
10.2
10.2
10.2
12.0
12.0
12.0
11.1
11.1
11.1
12.5
12.5
12.5
11.5
11.5
11.5
12.8
12.8
12.8
11.8
11.8
11.8
Part Number
SBF600030F06
SBF600040F06
SBF600060F06
SBF165030F00
SBF165040F00
SBF165060F00
SBF165030F06
SBF165040F06
SBF165060F06
SBF090030F00
SBF090040F00
SBF090060F00
SBF090030F06
SBF090040F06
SBF090060F06
SBF245030F00
SBF245040F00
SBF245060F00
SBF245030F06
SBF245040F06
SBF245060F06
SBF600030F00
SBF600040F00
SBF600060F00
SBF600030F06
SBF600040F06
SBF600060F06
SBF245030F00
SBF245040F00
SBF245060F00
SBF245030F06
SBF245040F06
SBF245060F06
SBF245030F00
SBF245040F00
SBF245060F00
SBF245030F06
SBF245040F06
SBF245060F06
SMALL BLOCK FORD INVERTED DOME
• Forged from 4032 high silicone low expansion aluminum alloy for
high strength and reduced piston to wall clearance
• Radiused valve pockets
• Forced pin oiling
• Precision pin fitting and easy to use round wire locks included
• .927” or .912” high quality steel wrist pin (118 grams or 112 grams) included
• Precision ring grooves for INCLUDED 1.5, 1.5, 3.0mm rings
Rod
Pin
Bore
Stroke
Length
Dia.
4.030
3.850
5.956
.912
4.040
3.850
5.956
.912
4.060
3.850
5.956
.912
4.030
3.250
5.400
.927
4.040
3.250
5.400
.927
4.060
3.250
5.400
.927
4.030
3.400
5.400
.927
4.040
3.400
5.400
.927
4.060
3.400
5.400
.927
4.030
3.500
6.200
.927
4.040
3.500
6.200
.927
4.060
3.500
6.200
.927
4.030
4.000
6.250
.927
4.040
4.000
6.250
.927
4.060
4.000
6.250
.927
4.030
4.100
6.200
.927
4.040
4.100
6.200
.927
4.060
4.100
6.200
.927
Compression Heights shown with a "R"
Comp.
Dome
Weight
Height
Volume
Grams
1.600
-26cc
432
1.600
-26cc
436
1.600
-26cc
453
1.165
-16cc
402
1.165
-16cc
406
1.165
-16cc
410
1.090R
-16cc
385
1.090R
-16cc
388
1.090R
-16cc
392
1.245
-26cc
388
1.245
-26cc
392
1.245
-26cc
398
1.245
-26cc
388
1.245
-26cc
392
1.245
-26cc
398
1.245
-26cc
388
1.245
-26cc
392
1.245
-26cc
398
INCLUDE Oil Support Rails
C/R
64cc
9.0
9.0
9.0
8.7
8.7
8.7
9.0
9.0
9.0
8.4
8.4
8.4
9.0
9.0
9.0
9.7
9.7
9.7
Part Number
SBF600030I26
SBF600040I26
SBF600060I26
SBF165030I16
SBF165040I16
SBF165060I16
SBF090030I16
SBF090040I16
SBF090060I16
SBF245030I26
SBF245040I26
SBF245060I26
SBF245030I26
SBF245040I26
SBF245060I26
SBF245030I26
SBF245040I26
SBF245060I26
4.6/5.4 MODULAR FORD
FLAT TOP & INVERTED DOME
• Forged from 4032 high silicone low expansion aluminum alloy
for high strength and reduced piston to wall clearance
• Radiused valve pockets
• Forced pin oiling
• Precision pin fitting and easy to use round wire locks included
• .866” high quality steel wrist pin (110 grams) included
• Precision ring grooves for INCLUDED 1.5, 1.5, 3.0mm rings
Bore
3.551
3.571
3.581
3.551
3.571
3.581
Stroke
3.543
3.543
3.543
3.543
3.543
3.543
Rod
Length
5.930
5.930
5.930
5.930
5.930
5.930
Pin
Dia.
.866
.866
.866
.866
.866
.866
1-888-255-1942
Comp.
Height
1.220
1.220
1.220
1.220
1.220
1.220
Dome
Volume
0cc
0cc
0cc
-16cc
-16cc
-16cc
Weight
Grams
364
370
373
324
330
333
www.mahlemotorsports.com
C/R
46cc
11.5
11.5
11.5
9.0
9.0
9.0
Part Number
MOD220551F00
MOD220571F00
MOD220581F00
MOD220551I16
MOD220571I16
MOD220581I16
7
ACURA B18C1 DOHC VTECH
• Forged from 4032 high silicone low expansion aluminum alloy for
high strength and reduced piston to wall clearance
• Radiused valve pockets
• Forced pin oiling
• Precision pin fitting and easy to use round wire locks included
• .827" high quality steel wrist pin (105 grams) included
• Precision ring grooves for INCLUDED 1.0, 1.2, 2.8mm rings
Bore
81.00/3.189
81.25/3.199
81.50/3.209
81.00/3.189
81.25/3.199
81.50/3.209
81.00/3.189
81.25/3.199
81.50/3.209
Stroke
3.433
3.433
3.433
3.433
3.433
3.433
3.433
3.433
3.433
Rod
Length
5.429
5.429
5.429
5.429
5.429
5.429
5.429
5.429
5.429
Pin
Dia.
.827
.827
.827
.827
.827
.827
.827
.827
.827
Comp.
Height
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
Dome
Volume
1cc
1cc
1cc
-8cc
-8cc
-8cc
9cc
9cc
9cc
Weight
Grams
270
274
279
275
278
282
294
297
300
Comp.
Ratio
10.5
10.5
10.5
9.0
9.0
9.0
12.5
12.5
12.5
Part Number
ACR181189F01
ACR181199F01
ACR181209F01
ACR181189I08
ACR181199I08
ACR181209I08
ACR181189D09
ACR181199D09
ACR181209D09
ACURA RSX K20
• Forged from 4032 high silicone low expansion aluminum alloy for
high strength and reduced piston to wall clearance
• Radiused valve pockets
• Forced pin oiling
• Precision pin fitting and easy to use round wire locks included
• .866" high quality steel wrist pin (105 grams) included
• Precision ring grooves for INCLUDED 1.2, 1.2, 2.8mm rings
Bore
86.0/3.386
86.0/3.386
86.0/3.386
Rod
Length
5.472
5.472
5.472
Stroke
3.386
3.386
3.386
Pin
Dia.
0.866
0.866
0.866
Comp.
Height
1.176
1.176
1.176
Dome
Volume
-7cc
3cc
12cc
Weight
Grams
326
321
325
Comp.
Ratio
9.0
10.5
12.5
Part Number
ACR176386I07
ACR176386F03
ACR176386D12
HONDA H22
• Forged from 4032 high silicone low expansion aluminum
alloy for high strength and reduced piston to wall clearance
• Radiused valve pockets
• Forced pin oiling
• Precision pin fitting and easy to use round wire locks included
• .866" high quality steel wrist pin (105 grams) included
• Precision ring grooves for INCLUDED 1.2, 1.2, 2.8mm rings
Bore
87.00/3.425
87.50/3.445
87.00/3.425
87.50/3.445
87.00/3.425
87.50/3.445
8
Stroke
3.571
3.571
3.571
3.571
3.571
3.571
Rod
Length
5.630
5.630
5.630
5.630
5.630
5.630
Pin
Dia.
0.866
0.866
0.866
0.866
0.866
0.866
1-888-255-1942
Comp.
Height
1.220
1.220
1.220
1.220
1.220
1.220
Dome
Volume
-7cc
-7cc
-1cc
-1cc
10cc
10cc
Weight
Grams
328
331
319
322
342
348
www.mahlemotorsports.com
Comp.
Ratio
9.0
9.0
10.0
10.0
11.5
11.5
Part Number
HON220425I07
HON220445I07
HON220425F01
HON220445F01
HON220425D10
HON220445D10
All MAHLE ProSeries pistons are forged from a MSP25/2618 alloy
unless otherwise noted.
Ultralight Forgings
Ultra-Flat Ring Grooves
Grafal® Coating
Gas Porting Standard
DID YOU KNOW MAHLE manufactures power components for many of the world’s high performance automobiles, such as the Viper, C5 Corvette and Ford GT.
ProSeries
The MAHLE ProSeries piston is race-ready and designed for professional
racing-oval, dirt, circle track, and drag. MAHLE gives you a competitive
edge with pistons that are perfectly prepared when you tak e them
out of the box. We machine the correct valve reliefs, dome profiles
and ring grooves for competition. We fit the pins with proper clearances.
Then we inspect and hand deburr every piston. Plus, with factoryapplied phosphate and Grafal® skirt coatings, you eliminate the
expense and uncertainty of aftermark et coatings.
Reliable, Easy To Use Round Wire Locks
9
CHEVROLET SMALL BLOCK
23° FLAT TOP
•
•
•
•
8 lateral gas ports
High quality prefit steel pin
Round wire locks
.043", .043", 3mm rings required
Chevrolet 350
Bore
4.030
4.035
4.040
4.045
4.050
4.060
4.030
4.035
4.040
4.045
4.050
4.060
4.030
4.035
4.040
4.045
4.050
4.060
* Also
(.927"x 2.244" Pin @ 115 grams)
Dome Approx
Stroke Rod Length
C/H
Volume
3.500
5.700
1.550 -5.00
3.500
5.700
1.550 -5.00
3.500
5.700
1.550 -5.00
3.500
5.700
1.550 -5.00
3.500
5.700
1.550 -5.00
3.500
5.700
1.550 -5.00
3.500
6.000
1.250 -5.00
3.500
6.000
1.250 -5.00
3.500
6.000
1.250 -5.00
3.500
6.000
1.250 -5.00
3.500
6.000
1.250 -5.00
3.500
6.000
1.250 -5.00
3.500
6.125
1.125* -5.00
3.500
6.125
1.125* -5.00
3.500
6.125
1.125* -5.00
3.500
6.125
1.125* -5.00
3.500
6.125
1.125* -5.00
3.500
6.125
1.125* -5.00
fit Chevrolet 383 "Stroker" 3.750 Stroke
Chevrolet 400
Bore
4.125
4.135
4.145
4.155
4.125
4.135
4.145
4.155
Stroke
3.500
3.500
3.500
3.500
3.750
3.750
3.750
3.750
(.927"x 2.244" Pin @ 115 grams)
Dome
Rod Length
C/H
Volume
6.000
1.250 -5.00
6.000
1.250 -5.00
6.000
1.250 -5.00
6.000
1.250 -5.00
6.000
1.125 -5.00
6.000
1.125 -5.00
6.000
1.125 -5.00
6.000
1.125 -5.00
C/R
Pocket Depth
Grams
64cc
Int.
385
10.59
0.307
386
10.61
0.307
388
10.63
0.307
390
10.65
0.307
392
10.67
0.307
395
10.72
0.307
385
10.59
0.307
386
10.61
0.307
388
10.63
0.307
390
10.65
0.307
392
10.67
0.307
395
10.72
0.307
357
10.77
0.307
358
10.80
0.307
359
10.82
0.307
360
10.84
0.307
362
10.86
0.307
365
10.91
0.307
x 6.00 Rod Length
Approx
Grams
422
425
429
433
408
410
413
416
C/R
64cc
11.71
11.76
11.81
11.85
11.71
11.76
11.81
11.85
Exh.
0.227
0.227
0.227
0.227
0.227
0.227
0.227
0.227
0.227
0.227
0.227
0.227
0.227
0.227
0.227
0.227
0.227
0.227
Part #
928928130
928928135
928928140
928928145
928928150
928928160
936616230
936616235
936616240
936616245
936616250
936616260
673616930
673616935
673616940
673616945
673616950
673616960
Pocket Depth
Int.
Exh.
0.307
0.227
0.307
0.227
0.307
0.227
0.307
0.227
0.307
0.227
0.307
0.227
0.307
0.227
0.307
0.227
Part #
936614725
936614735
936614745
936614755
936737625
936737635
936737645
936737655
"I'm always looking for ways to improve performance, which is why I
tried out MAHLE Pistons. Here's why I've been using them ever
since: We verify the accuracy of all dimensions, and are amazed with
their exacting tolerances...especially the ring grooves. Plus, they
come pre-pin fitted and de-burred, straight from the factory. This
literally saves us an average of two hour s in piston prep time per
engine. I thought the price seemed high, but gave them a shot since
they come standard with a pin, pin lock and really unique rings.
Taking into consideration both the hor sepower gains and labor
savings, I'm actually ahead of the game!"
Keith Dorton/Automotive Specialists, & Circle Track Tech Council Member
10
1-888-255-1942
www.mahlemotorsports.com
CHEVROLET SMALL BLOCK
21° FLAT TOP
•
•
•
•
•
Designed for severe angle milled cylinder heads
8 Lateral gas ports
High Quality prefit steel pin
Round wire locks
.043", .043", 3mm rings required
Chevrolet 350
Bore
4.030
4.035
4.040
4.045
4.050
4.060
4.030
4.035
4.040
4.045
4.050
4.060
Stroke
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
(.927"x 2.244" Pin @ 115 grams)
Dome
Approx
Rod Length
C/H
Volume
Grams
5.700
1.550 -7.67
461
5.700
1.550 -7.67
464
5.700
1.550 -7.67
467
5.700
1.550 -7.67
469
5.700
1.550 -7.67
471
5.700
1.550 -7.67
474
6.000
1.250 -7.67
434
6.000
1.250 -7.67
436
6.000
1.250 -7.67
438
6.000
1.250 -7.67
441
6.000
1.250 -7.67
443
6.000
1.250 -7.67
447
C/R
50cc
12.25
12.28
12.30
12.33
12.35
12.40
12.25
12.28
12.30
12.33
12.35
12.40
Pocket Depth
Int.
Exh.
0.340
0.300
0.340
0.300
0.340
0.300
0.340
0.300
0.340
0.300
0.340
0.300
0.340
0.300
0.340
0.300
0.340
0.300
0.340
0.300
0.340
0.300
0.340
0.300
Part #
929040430
929040435
929040440
929040445
929040450
929040460
928982830
928982835
928982840
928928245
928982850
928982860
CHEVROLET SMALL BLOCK
INVERTED DOME
•
•
•
•
Bore
4.030
4.035
4.040
4.045
4.050
4.055
4.060
Stroke
3.500
3.500
3.500
3.500
3.500
3.500
3.500
Rod Length
6.000
6.000
6.000
6.000
6.000
6.000
6.000
C/H
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1-888-255-1942
8 lateral gas ports
High quality prefit steel pin
Round wire locks
.043", .043", 3mm rings required
Dome
Volume
14.00
14.00
14.00
14.00
14.00
14.00
14.00
Approx
Grams
405
407
409
411
413
415
418
C/R
64cc
9.58
9.59
9.61
9.63
9.65
9.67
9.69
www.mahlemotorsports.com
Pocket Depth
Int.
Exh.
0.300
0.220
0.300
0.220
0.300
0.220
0.300
0.220
0.300
0.220
0.300
0.220
0.300
0.220
Part #
936664230
936664230
936664240
936664245
936664250
936664255
936664260
11
CHEVROLET SMALL BLOCK
23° DOME
•
•
•
•
8 lateral gas ports
High quality prefit steel pin
Round wire locks
.043", .043", 3mm rings required
Chevrolet 350
Bore
4.030
4.040
4.050
4.060
4.030
4.040
4.050
4.060
4.030
4.040
4.050
4.06
Stroke
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
Rod Length
6.125
6.125
6.125
6.125
6.000
6.000
6.000
6.000
5.700
5.700
5.700
5.700
C/H
1.125
1.125
1.125
1.125
1.250
1.250
1.250
1.250
1.550
1.550
1.550
1.550
(.927"x 2.244" Pin
Dome
Approx
Volume
Grams
12.50
400
12.50
404
12.50
407
12.50
410
12.50
418
12.50
421
12.50
425
12.50
428
12.50
449
12.50
453
12.50
458
12.50
464
@ 115 grams)
C/R
Pocket Depth
64cc
Int.
Exh.
13.44
0.320
0.240
13.49
0.320
0.240
13.55
0.320
0.240
13.60
0.320
0.240
13.44
0.320
0.240
13.49
0.320
0.240
13.55
0.320
0.240
13.60
0.320
0.240
13.44
0.320
0.240
13.49
0.320
0.240
13.55
0.320
0.240
13.60
0.320
0.240
Part #
928779800
936533940
936533950
936533960
936530530
936530540
936530550
936530560
673787830
673787840
67378750
673787860
CHEVROLET LS1/6
• Forged from 4032 high silicone low expansion aluminum
alloy for high strength and reduced piston to wall clearance.
• Stock rod and stroke uses .945 pin
• Stroker and long rod uses .927 pin
• 8 lateral gas ports
• High quality prefit steel pin
• Round wire locks
• .043", .043", 3mm rings required
Bore
3.901
3.903
3.905
3.907
3.901
3.903
3.905
3.907
3.901
3.903
3.905
3.907
12
Stroke
3.662
3.662
3.662
3.662
3.662
3.662
3.662
3.662
4.000
4.000
4.000
4.000
Rod Length
6.098
6.098
6.098
6.098
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
C/H
1.340
1.340
1.340
1.340
1.314
1.314
1.314
1.314
1.125
1.125
1.125
1.125
1-888-255-1942
Dome
Volume
Approx
Grams
AIL
AV
A
C/R
64cc
E
BL
SP
R
www.mahlemotorsports.com
Pocket Depth
Int.
Exh.
20
ING
04
Part #
929155001
929155003
929155005
929155007
929156801
929156803
929156805
929156807
929157601
929157603
929157605
929157607
CHEVROLET SMALL BLOCK
DOME BRODIX-12
•
•
•
•
8 lateral gas ports
High quality prefit steel pin
Round wire locks
1.5mm x 1.5mm x 3mm rings required
Bore
4.125
4.130
4.135
4.140
4.145
4.150
4.155
4.160
Stroke
3.800
3.800
3.800
3.800
3.800
3.800
3.800
3.800
Rod Length
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
C/H
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
Dome
Volume
-1.64
-1.64
-1.64
-1.64
-1.64
-1.64
-1.64
-1.64
Approx
Grams
455
457
459
462
465
468
471
474
C/R
58cc
14.00
14.03
14.05
14.08
14.11
14.14
14.17
14.19
Pocket
Int.
239
239
239
239
239
239
239
239
Depth
Exh.
173
173
173
173
173
173
173
173
Part #
936828325
936828330
936828335
936828340
936828345
936828350
936828355
936828360
CHEVROLET SMALL
BLOCK DOME ASCS
•
•
•
•
Bore
4.030
4.035
4.040
4.045
4.060
4.030
4.035
4.040
4.045
4.060
4.125
4.130
4.135
4.140
4.145
Stroke
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.335
3.335
3.335
3.335
3.335
Rod Length
5.700
5.700
5.700
5.700
5.700
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
1-888-255-1942
C/H
1.550
1.550
1.550
1.550
1.550
1.250
1.250
1.250
1.250
1.250
1.330
1.330
1.330
1.330
1.330
8 lateral gas ports
High quality prefit steel pin
Round wire locks
.043", .043", 3mm rings required
Dome
Volume
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
Approx
Grams
472
474
476
478
480
433
435
437
439
444
460
462
464
467
469
C/R
64cc
13.33
13.36
13.39
13.41
13.50
13.33
13.36
13.39
13.41
13.50
13.24
13.27
13.29
13.31
13.33
www.mahlemotorsports.com
Pocket
Int.
0.370
0.370
0.370
0.370
0.370
0.370
0.370
0.370
0.370
0.370
0.370
0.370
0.370
0.370
0.370
Depth
Exh.
0.268
0.268
0.268
0.268
0.268
0.268
0.268
0.268
0.268
0.268
0.268
0.268
0.268
0.268
0.268
Part #
928984430
928984435
928984440
928984445
928984460
936914130
936914135
936914140
936914145
936914160
929140225
929140230
929140235
929140240
929140245
13
CHEVROLET SMALL BLOCK 18° DOME
• Solid dome may be machined to flat top
• 8 lateral gas ports
• High quality prefit steel pin
• Round wire locks
• 1.5mm x 1.5mm x 3mm rings required
• Weights shown are design weight
Bore
4.125
4.130
4.135
4.140
4.145
4.150
4.155
4.160
4.125
4.130
4.135
4.140
4.145
4.150
4.155
4.160
Stroke
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
Rod Length
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
Dome
Volume
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
C/H
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
Approx
Grams
450
452
454
456
458
460
462
464
462
464
466
468
470
472
474
476
C/R
58cc
14.70
14.73
14.76
14.79
14.82
14.85
14.88
14.92
14.26
14.29
14.32
14.35
14.38
14.41
14.44
14.47
Pocket Depth
Int.
Exh.
0.340
0.253
0.340
0.253
0.340
0.253
0.340
0.253
0.340
0.253
0.340
0.253
0.340
0.253
0.340
0.253
0.340
0.253
0.340
0.253
0.340
0.253
0.340
0.253
0.340
0.253
0.340
0.253
0.340
0.253
0.340
0.253
Part #
929123825
929123830
929123835
929123840
929123845
929123850
929123855
929123860
929125325
929125330
929125335
929125340
929125345
929125350
929125355
929125360
Approx
Grams
438
440
442
444
446
448
450
452
450
452
454
456
458
460
462
464
C/R
58cc
13.84
13.86
13.89
13.92
13.95
13.98
14.01
14.04
13.42
13.45
13.48
13.51
13.54
13.57
13.60
13.63
Pocket Depth
Int.
Exh.
0.340
0.262
0.340
0.262
0.340
0.262
0.340
0.262
0.340
0.262
0.340
0.262
0.340
0.262
0.340
0.262
0.340
0.262
0.340
0.262
0.340
0.262
0.340
0.262
0.340
0.262
0.340
0.262
0.340
0.262
0.340
0.262
Part #
929128725
929128730
929128735
929128740
929128745
929128750
929128755
929128760
929130325
929130330
929130335
929130340
929130345
929130350
929130355
929130360
CHEVROLET SMALL
BLOCK 16° DOME
•
•
•
•
•
Solid dome may be machined to flat top
Includes 8 lateral gas ports
High quality prefit steel pin
Round wire locks
1.5mm x 1.5mm x 3mm rings required
Bore
4.125
4.130
4.135
4.140
4.145
4.150
4.155
4.160
4.125
4.130
4.135
4.140
4.145
4.150
4.155
4.160
14
Stroke
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
Rod Length
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
C/H
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1-888-255-1942
Dome
Volume
0.44
0.44
0.44
0.44
0.44
0.44
0.44
0.44
0.44
0.44
0.44
0.44
0.44
0.44
0.44
0.44
www.mahlemotorsports.com
CHEVROLET SMALL BLOCK
DOME BRODIX GB2000
Featuring MAHLE's Superior Box-N-Box
Technology for Extreme Strength and Light Weight
•
•
•
•
8 lateral gas ports
High quality prefit steel pin-available in spring 2004
Round wire locks
1.5mm x 1.5mm x 3mm rings required
Bore
4.100
4.125
4.130
4.135
4.140
4.145
4.150
4.155
4.160
4.100
4.125
4.130
4.135
4.140
4.145
4.150
4.155
4.160
4.100
4.125
4.130
4.135
4.140
4.145
4.150
4.155
4.160
Stroke
3.800
3.800
3.800
3.800
3.800
3.800
3.800
3.800
3.800
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.800
3.800
3.800
3.800
3.800
3.800
3.800
3.800
3.800
Rod Length
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
5.850
5.850
5.850
5.850
5.850
5.850
5.850
5.850
5.850
C/H
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1-888-255-1942
Dome
Volume
Approx
Grams
AIL
AV
C/R
62cc
L
AB
A
EE
Pocket Depth
Int. Exh.
20
R LY
www.mahlemotorsports.com
04
Part #
929148500
929148525
929148530
929148535
929148540
929148545
929148550
929148555
292148560
929149300
929149325
929149330
929149335
929149340
929149345
929149350
929149355
929149360
929150100
929150125
929150130
929150135
929150140
929150145
929150150
929150155
929150160
15
CHEVY & FORD 2 BARREL CLASS
L/W SERIES
•
•
•
•
8 lateral gas ports
High quality prefit steel pin
Round wire locks
.043", .043", 3mm rings required
Chevrolet 350 23º Flat Top (.927 x 2.244" Pin @ 90 grams)
Dome
Approx
C/R
Pocket Depth
Bore
Stroke
Rod Length C/H
Volume
Grams
64cc
Int.
Exh.
4.030
3.500
6.250
1.000
-2.00
315
10.98
0.221
0.145
4.040
3.500
6.250
1.000
-2.00
318
11.01
0.221
0.145
4.030
3.500
6.200
1.050
-2.00
323
10.98
0.221
0.145
4.040
3.500
6.200
1.050
-2.00
326
11.01
0.221
0.145
4.030
3.500
6.125
1.125
-2.00
333
10.98
0.221
0.145
4.040
3.500
6.125
1.125
-2.00
336
11.01
0.221
0.145
4.030
3.500
6.000
1.250
-2.00
350
10.98
0.221
0.145
4.040
3.500
6.000
1.250
-2.00
353
11.01
0.221
0.145
4.030
3.500
5.700
1.550
-2.00
388
10.98
0.221
0.145
4.040
3.500
5.700
1.550
-2.00
391
11.01
0.221
0.145
Ford "N" Head Flat Top (.927 x 2.244" Pin @ 90 grams)
Dome
Approx
C/R
Pocket Depth
Bore
Stroke
Rod Length C/H
Volume
Grams
62cc
Int.
Exh.
4.030
3.400
5.400
1.1001 0.00
335
11.04
0.000
0.000
4.035
3.400
5.400
1.1001 0.00
337
11.06
0.000
0.000
4.040
3.400
5.400
1.1001 0.00
339
11.08
0.000
0.000
4.045
3.400
5.400
1.1001 0.00
341
11.11
0.000
0.000
4.030
3.500
6.250
1.195
0.00
348
11.34
0.000
0.000
4.035
3.500
6.250
1.195
0.00
350
11.36
0.000
0.000
4.040
3.500
6.250
1.195
0.00
352
11.38
0.000
0.000
4.045
3.500
6.250
1.195
0.00
354
11.40
0.000
0.000
4.030
3.500
6.200
1.245
0.00
355
11.34
0.000
0.000
4.035
3.500
6.200
1.245
0.00
357
11.36
0.000
0.000
4.040
3.500
6.200
1.245
0.00
359
11.38
0.000
0.000
4.045
3.500
6.200
1.245
0.00
361
11.40
0.000
0.000
1 Requires 8.200" Deck Height
Part #
673618530
673618540
673659930
673659940
673619330
673619340
673620130
673620140
673684730
673684740
Part #
673978330
673978335
673978340
673978345
673606030
673606035
673606040
673606045
673654030
673654035
673654040
673654045
NASCAR LATE MODEL STOCK CAR (NON-COATED)
Small Block Chevy
Bore
4.020
4.025
4.030
4.035
4.040
4.045
4.020
4.025
4.030
4.035
4.040
4.045
Small
Bore
4.020
4.025
4.030
4.035
4.040
4.045
4.020
4.025
4.030
4.035
4.040
4.045
16
(.927"x 2.244" Pin @ 90 grams)
Dome
Stroke
Rod Length
C/H
Volume
3.480-3.500 6.125
1.125 -2.00
3.480-3.500 6.125
1.125 -2.00
3.480-3.500 6.125
1.125 -2.00
3.480-3.500 6.125
1.125 -2.00
3.480-3.500 6.125
1.125 -2.00
3.480-3.500 6.125
1.125 -2.00
3.480-3.500 6.000
1.250 -2.00
3.480-3.500 6.000
1.250 -2.00
3.480-3.500 6.000
1.250 -2.00
3.480-3.500 6.000
1.250 -2.00
3.480-3.500 6.000
1.250 -2.00
3.480-3.500 6.000
1.250 -2.00
Block Ford (.927"x 2.244" Pin @ 90 grams)
Dome
Stroke
Rod Length
C/H
Volume
3.500
6.200
1.195 0.00
3.500
6.200
1.195 0.00
3.500
6.200
1.195 0.00
3.500
6.200
1.195 0.00
3.500
6.200
1.195 0.00
3.500
6.200
1.195 0.00
3.500
6.250
1.250 0.00
3.500
6.250
1.250 0.00
3.500
6.250
1.250 0.00
3.500
6.250
1.250 0.00
3.500
6.250
1.250 0.00
3.500
6.250
1.250 0.00
1-888-255-1942
Approx
Grams
330
331
333
335
336
338
341
343
350
352
353
355
C/R
62cc
11.21
11.24
11.26
11.28
11.30
11.33
11.21
11.24
11.26
11.28
11.30
11.33
Pocket Depth
Int.
Exh.
221
145
221
145
221
145
221
145
221
145
221
145
221
145
221
145
221
145
221
145
221
145
221
145
Part #
928802820
928802825
928802830
928802835
928802840
928802845
928803620
928803625
928803630
928803635
928803640
928803645
Approx
Grams
343
346
348
350
352
354
350
352
355
357
359
360
C/R
62cc
11.29
11.31
11.33
11.35
11.38
11.40
11.29
11.31
11.33
11.35
11.38
11.40
Pocket Depth
Int.
Exh.
000 000
000 000
000 000
000 000
000 000
000 000
000 000
000 000
000 000
000 000
000 000
000 000
Part #
CALL
CALL
CALL
CALL
CALL
CALL
9287756020
9287756025
928775630
928775635
928775640
928775645
www.mahlemotorsports.com
FORD SMALL BLOCK FLAT TOP
EDELBROCK 15 DEGREE HEAD
•
•
•
•
8 lateral gas ports
High quality prefit steel pin
Round wire locks
1.5 x 1.5 x 3.mm rings required
Bore
Stroke
Rod Length
4.125
4.125
VARIOUS
4.125
Call for Availability Of Various
Dome
C/H
Volume
1.000 7.4cc
1.125
7.4cc
1.245
7.4cc
Bore Sizes
Approx
C/R
Grams
388
404
VARIOUS
418
Pocket Depth
Int.
Exh.
0.300
0.240
0.300
0.240
0.300
0.240
Part #
928943025
928942225
928937225
Pocket Depth
Int.
Exh.
0.190
0.114
0.190
0.114
0.190
0.114
0.190
0.114
0.190
0.114
0.190
0.114
0.190
0.114
0.190
0.114
0.190
0.114
0.190
0.114
0.190
0.114
0.190
0.114
0.190
0.114
0.190
0.114
0.190
0.114
0.190
0.114
Part #
929151925
929151930
929151935
929151940
929151945
929151950
929151955
929151960
936586425
936586430
936586435
936586440
936586445
936586450
936586455
936586460
FORD SMALL BLOCK
YATES HEAD DOME
•
•
•
•
•
Bore
4.125
4.130
4.135
4.140
4.145
4.150
4.155
4.160
4.125
4.130
4.135
4.140
4.145
4.150
4.155
4.160
Stroke
Solid dome may be machined to flat top
8 lateral gas ports
High quality prefit steel pin
Round wire locks
.043", .043", 3mm rings required
Rod Length
VARIOUS
C/H
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.175
1.175
1.175
1.175
1.175
1.175
1.175
1.175
Dome
Volume
0.23cc
0.23cc
0.23cc
0.23cc
0.23cc
0.23cc
0.23cc
0.23cc
0.23cc
0.23cc
0.23cc
0.23cc
0.23cc
0.23cc
0.23cc
0.23cc
Approx
C/R
Grams
426
428
431
433
435
437
439
441 VARIOUS
436
438
440
442
445
447
449
451
FORD 2300cc
•
•
•
•
8 lateral gas ports
High quality prefit steel pin
Round wire locks
1.5 x 1.5 x 3.mm rings required
Bore
Stroke
3.810 3.126
3.820 3.126
3.830 3.126
3.810 3.126
3.820 3.126
3.830 3.126
*All Small Block
*All Small Block
Dome
Approx
C/R
Pocket Depth
Rod Length
C/H
Volume
Grams
58cc
Int.
Exh.
5.205
1.590
-1cc
407
9.0
5.205
1.590
-1cc
409
9.0
5.205
1.590
-1cc
415
9.1
CALL
5.700
1.090
-1cc
332
9.0
5.700
1.090
-1cc
337
9.0
5.700
1.090
-1cc
339
9.1
Ford C/R calculated with .042 gasket thickness
Ford Pistons available as semi-custom up to 4.185" bore
1-888-255-1942
www.mahlemotorsports.com
Part #
17
FORD SMALL BLOCK 351
N HEAD FLAT TOP
•
•
•
•
8 lateral gas ports
High quality prefit steel pin
Round wire locks
.043", .043", 3mm rings required
Dome
Approx
C/R
Pocket Depth
Bore
Stroke
Rod Length
C/H
Volume
Grams
62cc
Int.
Exh.
Part #
4.030
3.400
5.400
1.100 0.60
379
10.96
0.100
0.000
928769930
4.060
3.400
5.400
1.100 0.60
389
11.09
0.100
0.000
928769960
4.125
3.400
5.400
1.100 0.60
400
11.37
0.100
0.000
928769925
*4.020 3.500
6.250
1.195
0.00
367
11.29
0.000
0.000
673715920
*4.030 3.500
6.250
1.195
0.00
371
11.34
0.000
0.000
673715930
*4.035 3.500
6.250
1.195
0.00
373
11.36
0.000
0.000
673715935
*4.040 3.500
6.250
1.195
0.00
375
11.38
0.000
0.000
673715940
*4.060 3.500
6.250
1.195
0.00
383
11.47
0.000
0.000
673715960
*4.020 3.500
6.200
1.225 .13
383
11.27
0.050
0.000
936514920
*4.030 3.500
6.200
1.225 .13
386
11.32
0.050
0.000
936514930
*4.035 3.500
6.200
1.225 .13
388
11.34
0.050
0.000
936514935
*4.040 3.500
6.200
1.225 .13
390
11.36
0.050
0.000
936514940
4.045
3.500
6.200
1.225 .13
392
11.38
0.050
0.000
936514945
4.050
3.500
6.200
1.225 .13
393
11.41
0.050
0.000
936514950
4.055
3.500
6.200
1.225 .13
395
11.43
0.050
0.000
936514955
4.060
3.500
6.200
1.225 .13
397
10.99
0.050
0.000
936514960
*4.020 3.500
6.200
1.245 0.00
375
11.29
0.000
0.000
673717520
*4.030 3.500
6.200
1.245 0.00
378
11.34
0.000
0.000
673717530
*4.035 3.500
6.200
1.245 0.00
381
11.36
0.000
0.000
673717535
* All Small Block Ford "N" Head Pistons (except C/H 1.225) will have .100 intake valve pocket
as stock is rotated toward new design. C/R will be affected by approximately 1/10 of 1 point
FORD SMALL BLOCK FLAT TOP
BRODIX SPEC HEAD
•
•
•
•
8 lateral gas ports
High quality prefit steel pin
Round wire locks
.043", .043", 3mm rings required
Dome
Bore
4.030
4.035
4.040
4.045
4.050
4.055
4.060
18
Approx
Stroke
3.500
3.500
3.500
3.500
3.500
3.500
3.500
C/R
Rod Length
6.200
6.200
6.200
6.200
6.200
6.200
6.200
Pocket
C/H
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1-888-255-1942
Depth
Volume
3.7cc
3.7cc
3.7cc
3.7cc
3.7cc
3.7cc
3.7cc
Grams
393
395
398
402
404
406
408
58cc
11.38
11.40
11.43
11.45
11.47
11.49
11.52
www.mahlemotorsports.com
Int.
220
220
220
220
220
220
220
Exh.
230
230
230
230
230
230
230
Part #
929122030
929122035
929122040
929122045
929122050
929122055
929122060
HARLEY DAVIDSON TWIN CAM 88
• High quality prefit steel pin
• Round wire locks
• Rings included
Flat Top
Bore
3.875
Stroke
4.000
Rod Length
7.668
C/H
1.270
Dome
Volume
1.98cc
Approx
Grams
363
C/R
84cc
8.93
Pocket Depth
Int.
Exh.
0.200
0.200
Part #
928836675
Dome
3.875
4.000
7.668
1.270
15cc
405
10.60
0.200
928835875
0.200
Harley Davidson pistons with various stroke/rod/pin
combinations and bore sizes from 3.875” to 4.125” and
beyond available by request.
MERCURY MARINE 2.5 LITER V6
•
•
•
•
•
•
Direct Performance & Racing Replacement
Forged from MAHLE M138 alloy
High Quality PreFit Steel Pin
Round wire locks
Single CKS (Chrome Ceramic) Ring Included
Vertical Pin for Ring Rotation Control
Dome
Bore
Stroke Rod Length
C/H
Volume
3.500
Stock
Stock
1.480
0cc
Approx
Grams
465
C/R
n/a
Pocket Depth
Int.
Exh.
0.000 0.000
Part #
929025500
ACCESSORIES
MAHLE pins and round wire locks are designed with unique features
to work specifically with MAHLE pistons. The use of pins or round wire
locks provided by another manufacturer is strongly discouraged unless
approved by the MAHLE Motorsport Engineering Department.
Round Wire Locks
Description
Replacement for all pistons that use a .912" to .915" pin
Replacement for all pistons that use a .927" to .930" pin
Replacement for all pistons that use a .990" to .993" pin
Units
each
each
each
Part #
6442966
6436901
6442990
Wrist Pins
Description
.866" diameter
.867" diameter
.868" diameter
.869" diameter
.912" diameter
.927" diameter
.928" diameter
.929" diameter
.930" diameter
.927" diameter
.927" diameter
.928" diameter
.929" diameter
.930" diameter
.990" diameter
Units
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
Part #
6456396
6456404
6456412
6456420
6458152
6457808
6443501
6443519
6443527
6443311
6457157
6455109
6455117
6455125
7758139
Heavy Duty Pin (110 grams)
Heavy Duty Pin (110 grams)
Heavy Duty Pin (110 grams)
Heavy Duty Pin (110 grams)
Standard Pin (115 grams)
Standard Pin (115 grams)
Standard Pin (115 grams)
Standard Pin (116 grams)
Standard Pin (116 grams)
LightWeight Pin (90 grams)
Heavy Duty pin (125 grams)
Heavy Duty pin (125 grams)
Heavy Duty pin (125 grams)
Heavy Duty pin (125 grams)
Big Block pin (145 grams)
1-888-255-1942
www.mahlemotorsports.com
19
DID YOU KNOW M o s t F o r m u l a 1 r a c e c a r s a r e e q u i p p e d w i t h M A H L E p i s t o n s a n d M A H L E N i k a s i l ® c y l i n d e r l i n e r s .
20
CUSTOM PISTONS
For those times when a shelf piston just won’t get the job done, MAHLE
offers a custom piston program that is bringing new meaning to the word
“custom.” From ease of use to legendary performance, MAHLE delivers.
MAHLE pioneered the
concept of custom pistons that are true “drop
in” parts. We begin with
your specific application
in mind and engineer a
piston that is not only
optimized for maximum
performance, but also
ready to install without
additional prep work.
Many of our customers
tell us that using MAHLE
pistons saves them 2-4
hours of piston prep time
on every engine.
MAHLE custom pistons come standard with performance coatings. In
addition, MAHLE has the in-house capability to provide advanced
processes like hard anodized ring grooves. The bottom line is you save
time and money compared with aftermarket coatings.
MAHLE custom pistons are backed by a company with an 80 plus year
track record of innovation in piston technology and racing success. From
building the world’s first aluminum alloy piston in 1921 to our most
recent World Championship in racing, MAHLE is the world leader in
performance pistons.
The name MAHLE is synonymous with Porsche. From the earliest days of
Porsche street cars to today’s most advanced racecars, MAHLE and
Porsche have been partners in performance and innovation. MAHLE
Motorsports is proud to continue that tradition by offering big bore kits
and performance parts to the North American Porsche Sport market.
Our big bore kits feature MAHLE pistons with pins, clips and rings. They
also include a MAHLE exclusive; new Nikasil® cylinders. Best of all, they
have decades of real world Porsche experience that gives you complete
confidence whether on the track or on the street.
If you are looking for more performance from your Porsche daily driver
or full on racecar, come to the recognized source; MAHLE.
DID YOU KNOW M A H L E d e v e l o p e d N i k a s i l ® , a w e a r r e s i s t a n t c o a t i n g n o w u s e d t h r o u g h o u t t h e i n d u s t r y.
PORSCHE PISTONS
21
DID YOU KNOW A u t o m o t i v e I n d u s t r i e s r a t e s M A H L E h i g h e r o n q u a l i t y t h a n a n y o t h e r a u t o m o t i v e s u p p l i e r.
22
PERFORMANCE RINGS
MAHLE pioneered the use of piston ring simulation and computer
development tools to develop rings that provide “free” horsepower
by successfully minimizing friction. The difference is evident on the
dyno and on the track. MAHLE’s ultra flat ring flanks maximize ring
to piston sealing.
Our top ring is a ductile iron, plasma moly, barrel face configuration.
Our second ring is a cast iron, rever se twist. Our oil rings are a
3-piece style and are offered in both standard and low tension.
A large selection of coordinated piston ring sets are available in
1/16”, 1/16”, 3/16” or 1.5mm, 1.5mm, 3.0mm or ultra-low friction .043”,
.043”, 3.0mm sizes.
Standard Tension Oil Control Ring Sets 1/16” 1/16” 3/16”
Bore Size
4.000"
4.020"
4.020"
4.030"
4.030"
4.040"
4.040"
4.060"
4.060"
4.080"
4.125"
4.145"
4.145"
4.155"
4.155"
4.165"
4.165"
4.185"
4.185"
4.250"
4.270"
4.270"
4.280"
4.280"
4.290"
4.290"
4.310"
4.310"
4.330"
4.360"
4.380"
4.390"
4.400"
4.440"
4.466"
Part #
4000MS
4020MS
4025MS
4030MS
4035MS
4040MS
4045MS
4060MS
4065MS
4080MS
4125MS
4145MS
4150MS
4155MS
4160MS
4165MS
4170MS
4185MS
4190MS
4250MS
4270MS
4275MS
4280MS
4285MS
4290MS
4295MS
4310MS
4315MS
4330MS
4360MS
4380MS
4390MS
4400MS
4440MS
4466MS
Speed-Pro
R9902
R9902
R9771
R9902
R9771
R9902
R9771
R9902
R9771
R9902
R10375
R10375
R10248
R10375
R10248
R10375
R10248
R10375
R10248
R9374
R9374
R9745
R9374
R9745
R9374
R9745
R9374
R9745
R9374
R9374
Hastings
2M5523
2M5529
2M5519
2M5536
2M5537
Ring Size
4.005"
4.020"
4.025"
4.030"
4.035"
4.040"
4.045"
4.060"
4.065"
4.080"
4.125"
4.145"
4.150"
4.155"
4.160"
4.165"
4.170"
4.185"
4.190"
4.250"
4.270"
4.275"
4.280"
4.285"
4.290"
4.295"
4.310"
4.315"
4.330"
4.360"
4.380"
4.400"
4.440"
4.466"
Note
Drop In
Drop In
File fit
Drop In
File fit
Drop In
File fit
Drop In
File fit
Drop In
Drop In
Drop In
File fit
Drop In
File fit
Drop In
File fit
Drop In
File fit
Drop In
Drop In
File fit
Drop In
File fit
Drop In
File fit
Drop In
File fit
Drop In
Drop In
Drop In
Drop In
Drop In
Drop In
Drop In
Standard Tension Oil Control Ring Sets 1.5mm 1.5mm 3.0mm
Bore Size
3.552"
3.572"
3.581"
3.898"
3.905"
4.000"
4.010"
4.020"
4.030"
4.040"
4.060"
4.080"
4.090"
4.100"
4.125"
4.135"
4.145"
4.155"
4.165"
Part #
Speed-Pro
3556MS
3576MS
3586MS
3903MS
3910MS
4005MS-15
4015MS-15
4025MS-15
4035MS-15
4045MS-15
4065MS-15
4085MS-15
4095MS-15
4105MS-15
4130MS-15
4140MS-15
4150MS-15
4160MS-15
4170MS-15
1-888-255-1942
Hastings
R-20102
R-20102
R-20102
R-20102
R-20102
R-20102
R-20102
www.mahlemotorsports.com
Ring Size
3.556"
3.576"
3.586"
3.903"
3.910"
4.005"
4.015"
4.020"
4.035"
4.045"
4.065"
4.085"
4.095"
4.105"
4.130"
4.140"
4.150"
4.160"
4.170"
Note
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
23
Low Tension Oil Control Ring Sets 1/16” 1/16” 3/16”
Bore Size
4.000"
4.020"
4.030"
4.040"
4.060"
4.125"
4.145"
4.155"
4.165"
4.185"
4.270"
4.280"
4.290"
4.310"
4.390"
4.400"
4.500"
4.530"
4.560"
4.600"
Part #
4005ML
4025ML
4035ML
4045ML
4065ML
4130ML
4150ML
4160ML
4170ML
4190ML
4275ML
4285ML
4295ML
4315ML
4395ML
4405ML
4505ML
4535ML
4565ML
4605ML
Speed-Pro
R-9401
Hastings
2M5505
R-9346
2M5510
R-9344
2M5515
R-9374
R-9374
R010317
Ring Size
4.005"
4.025"
4.035"
4.045"
4.065"
4.130"
4.150"
4.160"
4.170"
4.190"
4.275"
4.285"
4.295"
4.310"
4.395"
4.405"
4.500"
4.530"
4.560"
4.600"
Note
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
Low Tension Oil Control Ring Sets .043” .043” 3.0mm
Bore Size
4.000"
4.020"
4.025"
4.030"
4.035"
4.040"
4.050"
4.060"
4.125"
4.135"
4.140"
4.145"
4.155"
Part #
4005ML-043
4025ML-043
4030ML-043
4035ML-043
4040ML-043
4045ML-043
4055ML-043
4065ML-043
4130ML-043
4140ML-043
4145ML-043
4150ML-043
4160ML-043
Speed-Pro
R-20100
R-20100
Hastings
R-20100
R-20100
R-20100
R-20109
R-20109
Ring Size
4.005"
4.025"
4.030"
4.035"
4.040"
4.045"
4.055"
4.065"
4.130"
4.140"
4.145"
4.150"
4.160"
Note
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
File fit
Don’t See a Ring Size You Need... Call
24
1-888-255-1942
www.mahlemotorsports.com
TERMS AND CONDITIONS
Prices, terms, conditions and product specifications are subject to change without
notice. All prices FOB Fletcher, NC. Pistons are sold in complete sets with pins and
round wire locks. All returns require a Return Goods Authorization (RGA) number.
WARRANTY NOTICE
Due to the nature of performance applications, the parts in this catalog are sold without
any express warranty or any implied warranty of merchantability or fitness for a
particular purpose. MAHLE Motorsports shall not, under any circumstances, be liable
for any special, incidental or consequential damages, including, but not limited to,
damage or loss of property or equipment, loss of profits or revenue, cost of purchased or
replacement goods, or claims of customers of the purchaser which may arise and/or
result from the sale, installation or use of these parts.
NOTES
All weights given are design weights. Actual weights may vary.
Compression Ratios are calculated based on "zero" deck height, .040” gasket and the
exact combustion chamber (cc) listed, unless otherwise noted.
Our pistons are designed to use rings which maintain the same radial width regardless of
"oversize." Certain ring manufacturers increase the radial width as bore oversize
increases, and these rings will not work with our pistons.
We accept Mastercard and Visa ONLY.
All COD shipments will have the appropriate COD fee added.
HOURS OF OPERATION
MONDAY - FRIDAY 8AM-5PM EASTERN TIME
MAHLE Motorsports
270 Rutledge Rd., Unit B
Fletcher, NC 28732
TOLL FREE: 888-255-1942
PHONE: 828-650-0802
FAX: 828-650-0819
EMAIL: [email protected]
1-888-255-1942
www.mahlemotorsports.com
1-888-255-1942
www.mahlemotorsports.com
1
23
23
MAHLE Motorsports, Inc.
270 Rutledge Rd., Unit B
Fletcher, North Carolina 28732
Phone 888-255-1942
Fax 828-650-0819
www.mahlemotorsports.com