Recip. Saw Blades

Transcription

Recip. Saw Blades

SAW BLADES
Recip. Saw Blades
Saw Blades
A unique line of high performance HSS Bi-Metal reciprocating saw blades designed to tackle any job. The blades are
suitable for all 1/2” shank reciprocating saws. Each blade is specially designed using state of the art computer
technology and the highest quality raw metarials. The result is blades that deliver:
• reduced tooth strippage breakage
• faster and smoother cut
• longer service life
TPI
Wood
3 - 10/14
Results
Fast & Rough - Slow & Smoother
• greater resistance to breakage/shattering
• greater overall strength
• more cuts per blade
Steel
10/14 - 24
Thicker Material - Thinner Material
Proper Blade selection is key
Selecting the correct blade for the material being cut ensures superior results and reduced costs.
Two important elements to remember when selecting a blade are:
Length: Blades vary greatly in length. Use shorter blades for plunge and longer ones to increase the depth of cut.
TPI: Blades range from 3-24 TPI. See the chart above for general guidelines on blade selection and performance.
For best results always keep at least two teeth in the material when cutting.
Wood Cutting Blades
Special fast cutting blades for wood with nails. The reinforced tooth profile with variable pitch
makes these blades tougher for longer lasting performances.
Ideal for wood with nails.
Ideal for wood with nails
metal 1/8” - 3/8”.
For clean and fast cutting of all types of wood (hard & soft), construction lumber, composite
materials, plastic, etc...
Ideal for general roughing-in.
Ideal for contour cutting.
Length Width Thickness TPI
6”
3/4”
0.050”
6/8
5
671 668 000
9”
3/4”
0.050”
6/8
5
671 968 000
6”
3/4”
0.035”
8/10
5
671 610 000
11”
3/4”
0.035”
8/10
5
671 150 000
Wood with nails
Metal & mild steel
1/16 and over & plastic.
92
Qty/
Order No.
Pack
6”
6”
9”
12”
3/4”
3/4”
3/4”
3/4”
0.050”
0.050”
0.050”
0.050”
6
6
6
6
5
25
5
5
671
671
671
671
6”
1/2”
0.050”
6
5
671 656 000
Multi Task MEGACUT Blades
Patented double teeth cut both ways in all materials encountered in demolition work. Extremely
resistant teeth stay sharp much longer to eliminate frequent blades changes. Flexible Bi-Metal
constrution assures good blade control with less effort. Not recommended for stainless.
Qty/
Order No.
Pack
6”
8”
11”
3/4”
3/4”
3/4”
0.035”
0.035”
0.035”
-
606
506
906
156
000
000
000
000
Qty/
Order No.
Pack
5
5
5
671 060 000
671 080 000
671 110 000
SAW BLADES
Saw Blades
Plaster and Drywall Cutting Blades
Special tooth design for clean cuts without clogging.
Ideal for drywall
and plasterboard
6”
3/4”
0.050”
6
5
Metal Scroll Cutting Blades
Long lasting blades for cutting all types of metals. Also for cutting pipes, angles, tubing.
Contour 1/8” and under
4”
1/4”
0.035”
18
Metal Cutting Blades
Long lasting blades for cutting all types of metals. Also for cutting pipes, angles, tubing.
Ideal for 1/8” - 1/4”
Ideal for 1/8” - 1/4”
Ideal for 1/8” & over
Ideal for 1/8” & under
Ideal for 1/8” - 1/4”
Ideal for 1/8” - 1/4”
Qty/
Order No.
Pack
671 666 000
Qty/
Order No.
Pack
5
671 468 000
Qty/
Order No.
Pack
6”
3/4”
0.035”
14
5
671 614 000
6”
3/4”
0.035”
14
25
671 514 000
8”
3/4”
0.035”
14
5
671 814 000
4”
3/4”
0.035”
18
5
671 418 000
6”
3/4”
0.035”
18
5
671 618 000
6”
8”
3/4”
3/4”
0.035”
0.035”
18
18
25
5
671 518 000
671 818 000
6”
3/4”
0.035”
24
5
671 624 000
6”
3/4”
0.035”
24
25
671 524 000
Jig Saw Blades
Ideal for 1/16” & under
A complete selection of jig saw blades to handle any type of cut in any material. Available in two shank styles to fit most
jig saws on the market. Proper blade selection is key to achieve the best possible cutting perfomance of the blade.
Three determining factors in selecting the right blade: Teeth per inch, blade geometry and blade material.
Blade teeth per inch and blade Geometry
TPI
Cuts
TPI
Material
Wood
10TPI
6TPI
Fast & Rough
20TPI
Thicker
Taper Ground Teeth
Wavy Set Teeth
Side set teeth allow for
quick and rough cuts.
Taper ground teeth allows
for precise & clean cuts.
Wavy set tooth allow for
fine, clean & straight cuts.
Slow & Smoother
Steel
22TPI
10TPI
Side Set Teeth
28TPI
Thinner
The higher the material density, such as steel, the higher the TPI blade is required. Consequently, higher TPI blades are
slower but produce smoother cuts. Large tooth spacing is suitable for deep and fast cuts in wood and plastics.
Blade Material
High Carbon Steel - HCS
HCS is a combination of iron and
steel. Blades made from HCS are
excellent for wood, laminated particle
board and plastics.
Bi-metal - BiM
Highly flexible blade resulting from
combining high carbon steel and high
speed steel. Optimum cutting
efficiency in wood and steel.
Carbide
Metabo carbide blades are designed
for the most demanding application.
For cutting fiberglass, asbestos, tiles,
cement and ceramics.
93
SAW BLADES
Saw Blades
Woodcut for quick, clean and accurate cuts in wood and plastics.
Made in Germany
Application
Cutting
Edge
TPI
Qty/
Pack
EU
T-Shank
Order No.
Univ.
Shank
Order No.
-
W o o d c u tTM
Hard & soft wood, plywood &
masonite up to 2 3/8”.
3”
6
5
672 456 000
72 406 HCS
W o o d c u tTM
Hard & soft wood, plywood &
masonite up to 2 3/8”.
3”
6
5
672 406 000 672 206 000
72 166 HCS
W o o d c u tTM
Hard & soft wood, plywood & masonite up
to 2 3/8”. For fast contour cutting.
3”
6
5
672 166 000 672 266 000
72 106 HCS
Woodcut
Hard & soft wood, plywood, masonite up
to 2 3/8” & plastics.
3”
8
5
672 106 000
3”
10
5
672 100 000 672 200 000
72 456 BiM
72 100 BiM
BI-METAL
TM
BI-METAL
Hard & soft wood, plywood, laminated
particleboard, masonite up to 1 1/4”,
fiberglass & plastics.
W o o d c u tTM
72 110 HCS
W o o d c u tTM
Hard & soft wood, plywood, masonite up
to 1 1/4”, fiberglass & plastics.
3”
10
5
672 110 000 672 210 000
72 170 HCS
W o o d c u tTM
Hard & soft wood, plywood,
masonite up to 4”.
4”
10
5
672 170 000 672 270 000
3”
10
5
672 160 000 672 260 000
Soft wood, insulating material up to 1 1/2”.
For fast contour cutting.
2”
12
5
672 312 000
Hard & soft wood, plywood & masonite up
to 1 1/4”. For fast contour cutting.
2”
20
5
672 320 000 672 350 000
Cutting
Edge
TPI
Qty/
Pack
EU
T-Shank
Order No.
Univ.
Shank
Order No.
Very fast, clean cuts in particle board, hard
& soft wood, wood with nails 1/4” - 2 3/8”
3”
6
5
672 370 000
-
Wood with nails, plywood up to
1 1/4”, aluminum 1/8” - 1/4”
3”
8
5
672 108 000 672 208 000
Cutting
Edge
TPI
Qty/
Pack
3”
-
2
672 150 000 672 250 000
Cutting
Edge
TPI
Qty/
Pack
EU
Univ.
T-Shank
Shank
Order No. Order No.
72 160 HCS
72 312 HCS
72 320 HCS
W o o d c u tTM
Reverse
teeth
Hard & soft wood, plywood, laminated
particleboard, masonite up to 1/4”, &
plastics. Down cutting.
W o o d c u tTM
W o o d c u TM
t
Nailcut HSS Bi-metal
For fast, rough cuts in wood with nails, aluminum & plastics.
Made in Germany
72 370 BiM
72 108 BiM
BI-METAL
Nailcut
BI-METAL
Nailcut
TM
TM
Megacut HSS Bi-metal
For for long lasting performance in all materials.
Made in Germany
72 128 BiM
Application
Application
Mild steel, stainless steel and non-ferrous metals 1/16” 1/8”. Hard & soft wood with nails, plywood, masonite,
fibreglass, plastics, and laminated particleboard.
BI-METAL
Metalcut HSS Bi-metal
For effortless cuts in all types of metal, steel & tough metarials.
Made in Germany
Application
EU
T-Shank
Order No.
-
Univ.
Shank
Order No.
72 410 BiM
BI-METAL
MetalcutTM
Fine, straight cuts in non-ferrous metal,
alumimum, plexiglass up to 1 1/4”.
3”
10
5
672 410 000
72 112 BiM
BI-METAL
MetalcutTM
Mild steel, non-ferrous
metal 1/8” - 3/8”.
2”
12
5
672 112 000 672 212 000
72 122 BiM
BI-METAL
MetalcutTM
Mild steel, stainless steel,
non-ferrous 1/16” - 3/16”.
2”
22
5
672 122 000 672 222 000
72 172 BiM
BI-METAL
MetalcutTM
Hollow core metal doors
up to 2 3/8”.
4”
22
5
672 172 000 672 272 000
72 364 BiM
BI-METAL
MetalcutTM
2 1/8”
14
5
672 364 000
BI-METAL
MetalcutTM
2”
28
5
672 128 000 672 228 000
Cutting
Edge
TPI
Qty/
Pack
EU
Univ.
T-Shank
Shank
Order No. Order No.
72 128 BiM
Carbide grain for cutting hard or abrasive materials.
Made in Germany
72 111 CG
Carbide Grain
Straight cuts in metal, non-ferrous
metal, aluminum sheet metal
1/16 - 1/8”.
Mild steel, stainless steel,
non-ferrous metal up to 1/16”.
Application
Fiberglass, asbestos, cement, tiles, & ceramics.
Carbide
grain
2”
94
-
2”
-
1
-
-
672 111 000
SANDERS
SMOOTHING
THE WAY TO
PERFECTION.
Hardly any area places such varied demands on tool development as
finishing surfaces; rough or fine, straight or curved, in tight corners or
wide-open areas. Metabo offers a suitable sander for almost any special
application. When the tool matches the challenge, you get the desired result.
Metabo. Work. Don’t play.
95
SANDERS
Ergonomic design
Design provides a
superior comfort level
for the user.
Variospeed (V) Full-wave Electronic
Speed Control
The speed can be varied from
the lowest speed value to the maximum.
Integrated dust
collection system
(optional for SR20-23)
Electrodynamic
balancing system
Reduces noise and
vibration
Dust sealed
ball bearings
Longer service life
due to optimum dust
protection.
Solid Aluminum die-cast bearing flange
Guarantees a higher service life of the machine.
Double insulation
Double insulation protects against electric
shock by creating a non-conducting barrier
between the operator and the electric
components inside the tool.
Power Control System
Nearly eliminates sanding scratches when
applying the running tool to the material
because of the integrated backing pad brake.
96
Quick grip system
For quick and
easy change of
sanding paper.
Oscillating plate made
of die-cast Aluminum
More robust material
provides for longer
service life.
Unique Dual Orbit Setting
Unique feature that allows choice between
2 orbit diameters depending on the application. The smaller orbit setting products a
much finer surface finish while the larger
orbit setting allows up to 70% more stock
removal.
Sanding up to the
outermost corner
Oscillating plate without protruding parts.
Turbo Boost
For maximum material removal rate.
SANDERS
Which sander for which job?
Type and output
Application
Page
1/3 Sheet orbital sanding of wood, plastic, metal, stone on even or slightly curved surfaces.
Excellent weight-output ratio for hard and long hours of working, as well as working overhead.
SR20-23
210 Watts
98
1/2 Sheet orbital production, however with large sanding disc for quicker material removal.
Sr358
350 Watts
98
6” Random orbit sander for universal use due to Duo oscillating circuit setting. Finest sanding on even
and curved surfaces using 1/8" orbit. Fastest material removal rate using 1/4" orbit, and for even faster
removal a Turbo Boost. Variable speed makes tool suitable for sanding heat-sensitive materials and surfaces.
Sanding of very thin materials?(e.g. veneers).
SXE450 TurboTec
400 Watts
99
We never ask of others
what we cannot
ACHIEVE
ourselves
97
ORBITAL FINISHING SANDERS
SR20-23
1/3 Sheet Orbital Finishing
Sander
Model #
Order #
SR20-23
602026420
Sr358
600358420
Aluminum die-cast
orbit plate
Integral dust collection
Auto-stop brushes
•
Sanding pad size
Sheet size
Orbits per minute
Orbit size
Amps
Rated input watts
Tool weight
Shipping weight
Length
3 5/8" x 7 1/8"
1/3 sheet
10850
1/10"
1.9
210
4.5 lbs.
5.3 lbs.
10 1/4"
Carrying case
631396000 (optional)
Standard Equipment:
Assorted sanding paper
•
•
•
(use w/631981000)
Pre-cut sandpaper for Metabo finishing sanders
1/3 sheet paper
(not pre-drilled)
(10 sheets per pack)
Cat. No.
624328000
624329000
624330000
624331000
624332000
624333000
624334000
Spec.
. . . . . . . . . A40
. . . . . . . . . A60
. . . . . . . . . A80
. . . . . . . . A100
. . . . . . . . A120
. . . . . . . . A180
. . . . . . . . A240
1/3 sheet paper (pre drilled
for integral dust collection)
Cat. No.
624480000
624481000
624482000
624483000
624484000
624485000
624486000
1/2 sheet paper
(not pre-drilled)
Cat. No.
Spec.
624365000 . . . . . . . . . A40
624366000 . . . . . . . . . A60
624367000 . . . . . . . . . A80
624368000 . . . . . . . . A100
624369000 . . . . . . . . A120
624370000 . . . . . . . . A180
624371000 . . . . . . . . A240
98
Sr358
1/2 Sheet Orbital Finishing
Sander
Spec.
. . . . . . . . . A40
. . . . . . . . . A60
. . . . . . . . . A80
. . . . . . . . A100
. . . . . . . . A120
. . . . . . . . A180
. . . . . . . . A240
•
•
4 1/2" x 8 7/8"
1/2 sheet
11000
1/10"
3.4
350
6.75 lbs.
8.25 lbs.
11 1/4"
(without bag)
Front handle
(316025200)
Paper dust bag
(631288000)
.
RANDOM ORBIT SANDERS
SXE450 Accessories
Order #
Backing Pads
6" medium hard (6 hole)
6" soft (6 hole)
PSA Pad-6" (6 hole)
631158000
631156000
631169000
“Cling-fit" intermediate
disc (not perforated)
soft, well suited for
sanding rounded
surfaces
SXE450 TurboTec
6" Dual Random Orbit Sander
NEW
Model #
Order #
SXE450 TurboTec
600129420
Variospeed (V) electronics
Power Control System
Dual Orbit Setting
Integral dust collection
Auto-stop brushes
Double insulated
•
•
•
•
•
•
Sanding pad size
Sheet size
Orbits per minute
Orbit size
Amps
Rated input watts
Tool weight
Shipping weight
Length
Carrying case
6" round (6 hole)
6" round
8400-22000
1/8" or 1/4"
3.4
350
5.75 lbs.
8 lbs.
11 1/2"
Standard Equipment:
Front handle (316041410)
Intec filter complete (316041310)
Medium hard velcro pad
Backing pad (339160440)
Hexagon key (344161520)
Dual Orbit Settings:
6"
624037000
“Cling-fit” sanding
discs
(packs of 5)
Grit
A40
A60
A80
A100
A120
A180
A240
A320
A400
6" (6 hole)
624001000
624002000
624003000
624004000
624005000
624006000
624007000
624008000
624009000
(packs of 25)
• 1/8" orbit for fine
finishing
• 1/4" orbit for fast
stock removal
A40
A60
A80
A100
A120
A180
A240
A320
A400
6" Sanding
Assortment
Package includes:
10 Pieces- P 60
10 Pieces- P 80
5 Pieces- P 120
6" (6 hole)
624019000
624020000
624021000
624022000
624023000
624024000
624025000
624026000
624027000
624066000
“Cling-fit” polishing
sponge
6"
631233000
“Cling-fit” lambswool polishing disc
6"
631217000
“Cling-fit” felt
polishing disc (hard)
6"
631168000
“Cling-fit” nonwoven abrasive disc
Grit
A100
A280
6"
624038000
624039000
“Cling-fit” abrasive
mesh (A100, 3 pack)
Turbo Boost allows for extreme
performance results for fastest
removal of stock!
6"
624040000
99
SANDER ACCESSORIES
Random Orbit/Orbital Finishing Sander Accessories
Order #
631288000
Spare Paper Dust
Bags (5 per pack)
(for Sr356, Sr358, SXE425
SXE450)
“Cling-fit" Intermediate
Disc (not perforated)
soft, well suited for sanding
rounded surfaces
5"
631216000
“Cling-fit” Sanding Discs
(packs of 5)
Grit
A40
A60
A80
A100
A120
A180
A240
A320
A400
631235000
Canvas Dust Bag
SXE450)
5" (8 hole)
631226000
631227000
631228000
n/a
631229000
631230000
631231000
631236000
631237000
Canvas Dust Bag
631758000
For use with the paper
dust bag holder.
SXE450)
(packs of 25)
A40
A60
A80
A100
A120
A180
A240
A320
A400
5" (8 hole)
631584000
631585000
631586000
n/a
631587000
631588000
631589000
631596000
631597000
5" Sanding
Assortment
Package includes:
10 Pieces10 Pieces5 Pieces-
631583000
P 60
P 80
P 120
“Cling-fit” Polishing
Sponge
5"
631222000
“Cling-fit” LambsWool Polishing Disc
5"
631223000
“Cling-fit” Felt
Polishing Disc (hard)
5"
631242000
“Cling-fit” Nonwoven Abrasive Disc
Grit
A100
A280
5"
631238000
631239000
“Cling-fit” Abrasive
Mesh (A100, 3 pack)
5"
100
Order #
631215000
Vacuum Hose
630318000
6' x 1 1/2" diameter and
2 1/4" vacuum connection.
Tapered end fits directly into
tool's extraction port.
631362000
Vacuum Hose
10' x 1 1/2" diameter and
2 1/4" vacuum connection.
Tapered end fits directly
into tool's extraction port.
Bayonet Connector
630898000
Replaces the tapered fitting
on 1 1/2" hose for a
positive connection to
tools extraction port.
SXE450)
1/3 Sheet Paper
Punch (for SR356)
631148000
1/2 Sheet Paper
Punch (for SR358)
* Integral dust collection
requires the use of
punched sandpaper
631149000
Pleated Dust Filter
(For use with the
631981000)
631980000
Dust Collector
Cartridge
(for SR20-23)
631981000
Vacuum Adptr 1-1/4"
(for FSR200 and FSX200)
626996000
Intec Dust Collector
w/Filter
(for FSR200 and FSX200)
625601000
Replacement Filter for
625601000
625602000
PAINT REMOVER
LF724S
Paint Remover
Model #
Order #
LF724S
600724420
Double insulation
Environmentally friendly method of paint and varnish removal
Highly suitable for handling rabbets
Continuous adjustment of chip removal: 0–.012"
Reversible all-carbide blades with long service life
Low vibration reduces fatigue
Metabo S-automatic safety clutch
Minimal dust creation
Encased aluminum die-cast gear housing
High-performance palloid gear system
Universal AC-DC motor with ample power in reserve
Winding protection grid
Torque: 18 inch pounds
Blade cutting circle diameter
Maximum rabbet height
Axial cutting depth
Radial cutting depth
Rated input
Amps
No-load speed (RPM)
Tool weight
Shipping weight
Length
Carrying case
3 1/7"
1 1/10"
.012"
.006"
710 watts
6.0
10000
6.25 lbs.
9.25 lbs.
10 3/4"
344452320 (standard)
Standard Equipment:
4 indexable solid tungsten carbide blades
- 4 cutting edges per blade
Vacuum adaptor
Combination wrench (344162450)
Cleaning pick (344162540)
Accessories
630318000 Vacuum Hose
6' x 1 1/2" diameter and 2 1/4" vacuum connection. Tapered end fits
directly into tool's extraction port.
631362000 Vacuum Hose
10' x 1 1/2" diameter and 2 1/4"
vacuum connection. Tapered end
fits directly into tool's extraction
port.
630898000 Bayonet Connector
Replaces the tapered fitting on
1 1/2" hose for a positive
connection to tools extraction port.
631660000 Spare blades
Indexable solid tungsten carbide
blades. (10-piece set)
631865000 Parallel Stop
101
HEAT GUNS
HE2000
Electronic 3-Speed Variable
Temperature Heat Gun
H1600
3-Speed Variable Temperature
Heat Gun
Model #
Order #
H1600
601605420
HE2000
602005420
Double insulation
Variospeed (V) electronics
Powerful motor with double fan for sustained power,
even under heavy loads in continuous use.
Easy to clean air filter keeps foreign matter away
from motor.
Non-slip pads make it easy to stand heat guns on
end for stationary use.
Air flow and temperature are easily adjusted
with one hand.
Amps
Rated input watts
Air Flow
Air Temperature
Tool weight
Shipping weight
Length
Carrying case
13
1400
8.8/12.4/17.7
CFPM
120/660/1000 °F
2.0 lbs.
3.0 lbs.
11 1/4"
655077000
(optional)
15
1500
8.8/9.5/17.7
CFPM
120-1100 °F
2.0 lbs.
3.0 lbs.
11 1/4"
655077000
(optional)
Accessories
630001000
Wide jet nozzle– 2"
Drying, stripping old coats
of paint
630002000
Wide jet nozzle– 3"
Stripping old coats of paint
from large surfaces
630003000 Deflector
Nozzle
Stripping old coats of paint
from window frames,
waxing and dewaxing skis
630004000 Air-wrap
Nozzle
Heating plastic tubes prior
to bending them; shrinking
of shrink-fit plastic sleeves
630005000 Reducing
Nozzle– 9mm dia.
Spot Heating
(HE2000 only)
630006000 Slit Nozzle
Lap welding of PVC
tarpaulins and sheeting
(requires 630005000)
630009000 Speculum
Welding
Butt welding plastics
heater
(requires 630005000)
102
CHUCKS
Futuro Top Keyless
Chucks
Keyless Drill
Chucks
For hammer drills
For non-reversing portable
and stationary drills
For Hammering
Capacity
Internal
Thread
Weight
ozs.
• All parts are hardened and ground for long life and smooth operation.
• Jaws are self tightening – no scored drill shanks and less drill breakage.
• No key to lose.
Order No.
1/16"-3/8"
3/8" - 24 UNF
12
636215000
1/16"-3/8"
1/2" - 20 UNF
12
636216000
0"-1/2"
3/8" x 24 UNF
16
636225000
0"-1/2"
1/2" - 20 UNF
16
636226000
Individually packaged in cardboard boxes.
Futuro Plus Double
Sleeve Reversible
Keyless Chucks
636620000
only
For corded and cordless drills
• New mechanism provides higher gripping power and longer life.
• Large protective steel cap protects chuck against dirt and damage.
Capacity
Internal Thread
or Taper Socket
Weight
ozs.
Order No.
3/64"-3/8"
3/64"-3/8"
3/8" - 24 NF
12
636321000
1/2" - 20 NF
12
636322000
3/64"-3/8"
B16
21
636333000
3/64"-1/2"
1/2" - 20 NF
29
636351000
3/64"-1/2"
5/8" - 16 NF
29
636352000
3/64"-1/2"
J6
29
636356000
1/8"-5/8"
5/8" - 16 UN
35
636361000
1/8"-5/8"
B16
35
636362000
1/8"-5/8"
J6
35
636364000
For Rotation Only
Capacity
Internal
Thread
Weight
ozs.
Order No.
1/32"-3/8"
3/8" - 24 NF
7
636518000
1/32"-3/8"
1/2" - 20 NF
7
636519000
1/16"-1/2"
1/2" - 20 NF
7
636520000
Keyed Drill Chucks
For Hammering
1/16"-1/2"*
1/2" - 20 NF
1/16"-1/2"
1/2" - 20 UNF
10
636614000
10.5
636620000
• New mechanism.
• All wearing parts are made of case hardened steel for longest life.
• Higher gripping power, positive chucking and close tolerance
concentricity.
• Supplied complete with chuck key.
*With special locking mechanism to prevent reversible keyless chuck
from loosening.
Futuro Plus SingleSleeve Reversible
Keyless Chucks
For Power Tools
For drills with spindle locking
mechanism only
• Specially developed mechanism allows changing bits rapidly with
one hand.
• High gripping power, accurate concentricity and long service life.
For Rotation Only
Capacity
Internal
Thread
For corded and cordless drills
Weight
ozs.
Order No.
1/32"-3/8"
1/2" - 20 NF
7
636516000
1/16"-1/2"
1/2" - 20 NF
7
636517000
For Hammering
1/16"-1/2"
1/2" - 20 NF
7
636617000
1/16"-1/2"
1/2" - 20 NF
11
636621000
Capacity
Internal
Thread
Weight
ozs.
Order No.
1/64"-3/8"
3/32"-1/2"
1/2" - 20 NF Rev.
8
635252000
1/2" - 20 NF Rev.
11
1/8"-5/8"
635250000
5/8" - 16 UN Rev.
21
635253000
Weight
ozs.
Order No.
For Drill Presses
Capacity
Internal Thread
or Taper Socket
1/16"-1/2"
3/8" - 24 NF
11
635033000
1/16"-1/2"
1/2" - 20 NF
11
635035000
1/8"-5/8"
1/2" - 20 NF
21
635054000
1/8"-5/8"
1/2" - 20 UN
21
635056000
Taper Arbors
Machine Side
Morse taper
Chuck Side
Taper arbor
Order No.
Replacement Chuck Keys
No. 2
J33
635119000
No. 2
J6
635121000
For Metabo drill chucks
Order No.
No. 2
B12
635114000
1/4" capacity
635165000
No. 2
B16
635115000
3/8" and 1/2" capacity
635167000
No. 3
J6
635131000
5/8" capacity
635168000
Individually packaged.
Individually packaged.
(See page 38 for rotary hammer quick-change chucks)
103
CARRYING CASES
MetaBox
624611000
34445161
631396000
631397000
344451880
631382000
623874000
344453220
344452300
344452310
344452320
344452340
655077000
656304000
623882000
623898000
623888000
623894000
344451840
655592000
104
Item No.
Material
Length(")
Width(")
Depth(")
623874000
623882000
623888000
623898000
623894000
656304000
624611000
631382000
631396000
631397000
344451610
344451840
344451880
344452300
344452310
344452320
344452340
655077000
655592000
344453220
steel
plastic
plastic
plastic
plastic
steel
plastic
steel
steel
steel
steel
plastic
steel
plastic
plastic
plastic
plastic
steel
plastic
plastic
26 1/2
12 1/4
15 1/2
12 1/4
20
13 3/4
15 1/2
15
15 5/8
15 1/2
15 1/4
24
17
18 3/4
20 3/4
18 1/2
18 3/4
15
23 1/2
11 1/2
6 1/2
11 3/4
13 1/4
11 3/4
11
10
11 5/8
7 1/2
8
7
11
16
10
12 1/2
13 1/2
12 1/2
12 1/4
10 3/4
13
11 3/8
11
1/4
3/8
1/4
1/2
1/8
1/4
9
4 3/4
5 1/8
3 1/2
6 1/2
3 7/8
4 3/4
4 7/8
4 1/2
4 3/4
3 3/4
11
4
4
4
4
6
5
4
PARTS REFERENCE
Call 1-877-METABO1 (1-877-638-2261) for your nearest Authorized Service Centre
or visit metabo.ca
MODEL NUMBER
626
655
703 VARIATION 0 & 1
703 VARIATION 2
751
0882
1015 VARIATION 0 & 1
1015 VARIATION 2
4479
6870
6872
7015
10125
11025 & 11050
11125
AD626
ASE 18
BE10R
BE250R+L
BE4006
BE4010
BE560
BE622SR+L
BE628SR+L
BE710
BE1020
BHA18
BHE20
BHE22
BHE24
BHE-D24
BHE6011SR+L
BHE6015SR+L
BHE6021SR+L
BHE6021 CONTACT
BHE6024SR+L
BHE6028SR+L
BHE6040S VAR. 0&1
BHE6040S VAR. 2
BHE6045S VAR. 0&1
BHE6045S VAR. 2
BHE6046S VAR. 0&1
BHE6046S VAR. 2
BS 12 IMPULS
BST 12 IMPULS
BST 12 PLUS
BST 15.6 PLUS
BS 18 PLUS
BST 18 PLUS
BSP 12
BSP 15
BSP 18
BSZ 12
BSZ 14
BSZ 18
CS14-15
CS23-355
DWSE6.3
FSR200
FSX200
G500
CARBON
ELECTRONIC
ARMATURE
FIELD
BRUSHES
UNIT
310006220
311008880
316033740
310006220
311007750
316023030
310007080
311008880
316033740
310008040 (TECH VARIATION 2 SEE SERVICE BULLETIN 00-02)
310006220
311008880
316033740
310004920
311006010
316033380
310005970
311008140
316033750
316018350
310008070 (TECH VAR. 2 SEE SERV BULLETIN 00-02) 316018340
80101101
80101500
80101188
80101510
310002750
311007760
316033490
310002750
311007040
316033580
310006380
311006510
316033610
310006410
311009220
316033520
310005960
311008110
316033520
343071980
343063240
310005960
311008110
316033520
343071980
343063240
310006220
311008880
316033740
316027110 (G)
310007550
317003420 (G)
317003410 (G)
316027110 (G)
310006220
310006220
310007870
310007850
316040500 (G)
310008860
310007860
310007850
310007870
310007240
310007240
310005980
310006220
310005980
310005970
310007380
310008580
310007380
310008580
310007380
310008580
316037170 (I)
316037170 (I)
317002560 (I)
317002570 (I)
317002580 (I)
317002580 (I)
317003080 (I)
317003090 (I)
317003100 (I)
317003220 (I)
317003170 (I)
317003180 (I)
310008510
310009350
310007860
310009080
310009080
310008330
311008880
311007750
311009830
311009840
316033870
316033690
316039950
316039950
316033870
316033740
316023030
316034940
316034970
311010490
311009520
311009830
311009830
311007170
311007170
311009190
311008880
311009190
311008140
311009340
311009340
311009340
311009340
311009340
311009340
316039950
316034940
316034960
316034940
316022880
316022880
316033740
316033740
316033740
316033740
316033830
316033830
316033830
316033830
316033830
316033830
311010050
311010890
311009820
311010640
311010640
311009770
316033970
316042980
316034550
316041170
316041170
316034930
311009540
316018640
343076060
343078960
343076060
343078960
343076060
343078960
SWITCH
343072460
343406720
343072460
CORD
655065000
655065000
655065000
OTHER
635250000 (1)
635250000 (1)
635250000 (1)
343072460
343401060
343074980
655065000 635250000 (1) 635167000(2)
655064000 630282000 (8)
655065000 636226000 (11)
80101501
343404230
343404230
343404230
343404230
343404230
655046000
655065000
655065000
655065000
655065000
655065000
343404230
655065000 341101480 (7) 341101480 (7)
343072460
316039220
343406370
343406330
343408240
343408240
343406370
343072460
343406330
343406930
343406880
343408190
343408180
343407190
343406880
343407510
343406720
343406330
343075710
343077030
343075710
343075780
343406010
343406010
343406010
343406010
343406010
343406010
343406890
343406890
343406890
343406890
343406890
343406890
343077450
343077450
343077450
343407600
343407600
343407600
343407100
343408770
343407190
343408380
343408380
343406730
655065000 635250000 (1)
316039210 (G)
655065000 635252000 (1)
655065000 636519000 (11)
655064000
655064000
655065000 635252000 (1)
655065000 635250000 (1)
655065000 635250000 (1)
655065000
655065000
630201000 (3)
631042000 (3)
341031290 (7)
341031290 (7)
341031290 (7)
OTHER
635167000(2)
635167000(2)
635167000(2)
630201000 (4)
631042000 (4)
316023840 (7)
316023840 (7)
316023840 (7)
635167000(2)
635167000(2)
635167000 (2)
635167000(2)
635167000(2)
655064000
655064000
655064000
655064000
655064000
655064000
655064000
655064000 636611000 (11)
655064000
655064000
655046000
655046000
655046000
655046000
655046000
655046000
316029820 (14)
316029820 (14)
316029840 (14)
316029840 (14)
316029840 (14)
316029840 (14)
316035260 (14)
316035260 (14)
316035260 (14)
316037820 (14)
316037820 (14)
316037820 (14)
344494740
344497530
655064000 344162720 (12)
655065000 339160730 (10)
655065000 339160720 (10) 344097650(13)
655065000
631949000 (9)
Notes: (A) Field & housing have additional plastic guarding, (B) AC only, (C) AC/DC, (D) AC conversion kit,
(F) Motor/brush assembly, (G) Motor assembly, (H) Heat Element, (I) Cordless motor
Codes: (1) Chuck w/ Key, (2) Chuck Key, (3) Ram Blade, (4) Fixed Blade, (5) Foot Plate, (6) Roller Guide, (7) Flange nuts,
(8) Cutting Blade, (9) Collet, (10) Sanding Pad/Plate, (11) Keyless Chuck, (12) Bit holder, (13) Brake ring, (14) Orbital gear transmission
105
PARTS REFERENCE
or visit metabo.ca
MODEL NUMBER
GE700
GE900
GSE7141
GSE7145
H1600
HE2000
HS8365S
KHA24
KHE24
KHE28
KHE-D28
KHE32
KHE54
KHE55
KHE56
KHE75
KHE96
KN6875
KSAP 18
LF714S
LF724S
MHE56
MHE65
MHE96
MFE30
POWERGRIP
POWERGRIP II
POWERMAXX
PE7175
PE12-175
PSE1200
RS901
SB 12 PLUS
SBE13R
SBE560
SBE600R+L
SBE600R+L IMPULS
SBE610
SBE660
SBE680/2R+L
SBE750
SBE808 CONTACT
SBE1010 PLUS
SBP 18 PLUS
SBT 15.6 PLUS
SBZ 18
SE 12-115
SE2800
SE4000
SE5025R+L
SE5040R+L
SE5060/2R+L
SR20-23
SR356
SR358
SR4350
SSP 12
STE 70
STE105 PLUS
STE135 PLUS
STEB105 PLUS
STEB135 PLUS
STEP550
ARMATURE
310007690
310008430
310007250
310007270
FIELD
311009760
311009780
311009210
311009210
CARBON
BRUSHES
316034930
316034930
316033610
316033610
310007540
311009520
316033910
310008850
311010480
316039820
310007850
311009830
316034960
310007850
311009840
316034970
310007850
311009840
316034970
310008080
311009840
316032530
310008660
311010320
316037530
310008660
311010320
316037530
310009320
311010860
316042650
310008660
311010320
316037420
310009290
311010840
316042480
310002320
311007760 (A) 316033490
316038060 (I)
310006380
311007820
316033610
310008250
311009940
316034930
310009320
311010860
316042650
310008660
311010320
316037420
310009290
311010840
316042480
310007820
311010220
316034930
317003060 (I)
317003400 (I)
317003020 (I)
310007710
311009210
316033610
310008640
311009890
316034930
310008710
311010340
316037840
80102200
80102201
80101188
317002670 (F)
316027110 (G)
316033870
316027110 (G)
316033870
310007460
311009420
316033690
310007460
311009420
316033690
310008960
311010780
316043140
310007860
311009820
316034550
310006220
311007750
316023030
310007870
311009830
316034550
310006220
311008880
316033740
310007850
311009840
316034970
317003100 (I)
317002760 (F)
316041980 (I)
310008790
311010410
316034930
317003410 (G)
316039950
317003420 (G)
316039950
310007130
311007140
316022880
310007120
311007140
316022880
310007080
311008880
316033740
317003040 (G)
316035030
310007530
311009680
316033690
310007530
311009680
316033690
317002410 MOTOR ASSY
316033870
317003240 (I)
310007900
316030110
316033910
310007980
311009970
316034930
310007980
311009970
316034930
310007980
311009970
316034930
310007980
311009970
316034930
310007420
311007170
316033560
ELECTRONIC
UNIT
343076600
343077080
343075720
343075720
341146840 (H)
341146860 (H)
343080690
343078080
343078080
343078740
343078680
343078680
343078680
343081360
343080770
343081320
343081360
343080770
343081320
343078730
343075720
343079520
343406310
343077520
343080330
343077580
343077580
343077890
343077890
343075940
SWITCH
CORD
343406730
655065000
343406730
655065000
343404230
655065000
343404230
655065000
343077790
344494260
343077800
344494260
343404930
655065000
343408300
343406880
655064000
343406880
655064000
343407460
655064000
343406980
655064000
343407550
655064000
343407550
655064000
343408100
655046000
343407550
655064000
343408100
655064000
343404230
655065000
343407570
343404230
655064000
343406730
655064000
343407670
655046000
343407550
655064000
343407670
655064000
343406740
655065000
INC W/317003060
343408390
343407610
343404230
655065000
343406740
655065000
343407620
344490960
80102202
655065000
343406890
343406370
655065000
343406370
655065000
343406110
655065000
343406290
655065000
343408350
655065000
343407190
655065000
343406720
655065000
343406930
655065000
343077000
655064000
343406880
655065000
343407530
343406890
343407600
343406740
655065000
343408240
655064000
343408240
655064000
343406720
655064000
343406720
655064000
343072460
655064000
343406020
655065000
343406020
655064000
343406020
655064000
343406020
655064000
343407680
343406950
655065000
343406730
655064000
343406730
655064000
343406950
655064000
343406950
655064000
343401680
655064000
OTHER
OTHER
631949000 (9)
631949000 (9)
631949000 (9)
631949000 (9)
344147730 (8) 344147760 (4)
630202000 (3) 630203000 (4)
631660000 (4) 316028950 (5)
631660000 (4) 316028950 (5)
316034150 (14)
316038040 (14)
316039530 (14)
316037790 (5)
80102150 (5)
316029870 (14)
635304000 (1) 635167000 (2)
635304000 (1) 635167000 (2)
636611000 (11)
636611000 (11)
635167000 (1) 317003610 (G)
635250000 (1)
636611000 (11)
635250000 (1)
636226000 (11)
636226000 (11)
316035270 (14)
316029870 (14)
316040570 (14)
344162490 (12)
344162490 (12)
344162490 (12)
316035020 (10)
339160230 (10)
339160250 (10)
339160560 (10)
316029620 (5)
339129420 (5)
339129420 (5)
339129420 (5)
339129420 (5)
316019120 (5)
106
316029880 (6)
316029880 (6)
316037680 (6)
316029880 (6)
316037680 (6)
316019770 (6)
PARTS REFERENCE
or visit metabo.ca
MODEL NUMBER
ARMATURE
FIELD
STEP600 QUICK
310007420
311007170
STEP700 QUICK
310007270
311009210
SXE400
317002370 MOTOR ASSY
SXE425
310007580
311009530
SXE425 XL
310007580
311009680
SXE450 DUO
310007580
311009680
SXE450 TURBOTEC
310008980
311010570
UHE22
310007870
311009830
UHE28
310007850
311009840
USE8
310007860
311009820
W6-115
316040670
311010470
W7-115
310008880
311010260
W7-115 QUICK
310008880
311010260
W7-125 QUICK
310008880
311010260
W8-115 QUICK
310009050
311010700
W8-125
310009050
311010700
WE9-125 QUICK(600269420) 310009070
311010720
WE9-125 QUICK(600925420) 310007730
311010240
W10-125 QUICK
310007760
311010200
W10-150 QUICK
310007760
311010200
W11-125 QUICK
310009160
311010740
WB11-125 QUICK
310009160
311010740
W11-150 QUICK
310009160
311010740
WB11-150 QUICK
310009160
311010740
W14-125 ERGO
310008240
311010030
W14-150 ERGO
310008240
311010030
WE14-125 PLUS(600281420) 310009180
311010770
WE14-125 PLUS(601426420) 310007820
311010220
WE14-150 PLUS (VS)
310007820
311010220
WE14-150 QUICK(600160420) 310009180
311010770
WE14-150 QUICK(601451420) 310007820
311010220
WEP14-150 QUICK
310007820
311010220
WPS7-115 QUICK
310008880
311010300
WPS7-125 QUICK
310008880
311010300
WP7-115 QUICK
310008880
311010300
WP7-125 QUICK
310008880
311010300
W21-230
310007470
311009590
W23-180
310007470
311009590
W23-230
310007470
311009590
W25-230
310007480
311009590
W2030
310007470
316028400
W2230
310007470
316028400
W2280
310007470
316028400
W2530
310007480
316028420
CARBON
BRUSHES
316033400
316033610
ELECTRONIC
UNIT
343075940
343075720
316033690
316033690
316033690
316033670
316034940
316034970
316034940
316039610
316034930
316034930
316034930
316041640
316041640
316041640
316034930
316034930
316034930
316041640
316041640
316041640
316041640
316034690
316034690
316041640
316034930
316034930
316041640
316034930
316034930
316034930
316034930
316034930
316034930
316034830
316034830
316034830
316034830
316033840
316033840
316033840
316033840
343076110
343076210
343080880
343078100
343080960
343077080
343081060
343079360
343079360
343081030
343079380
343079380
SWITCH
343401680
343404230
343079780
343406020
343406020
343406020
343406020
343406930
343406880
343407190
343408260
343406730
343406730
343406730
343408540
343408540
343408550
343406730
343406740
343406740
343408540
343408540
343408540
343408540
343407110
343407110
343408550
343406740
343406740
343408550
343406740
343406740
343406730
343406730
343406730
343406730
343406210
343406210
343406210
343406210
343406210
343406210
343406210
343406210
CORD
655064000
655064000
655065000
655065000
655064000
655065000
655065000
655064000
655064000
655064000
655065000
655065000
655065000
655065000
655065000
655065000
55065000
655065000
655065000
655065000
655065000
655065000
655065000
655065000
655065000
655065000
655065000
655065000
655065000
655065000
655065000
655065000
655065000
655065000
655065000
655065000
655066000
655066000
655066000
655066000
655066000
655066000
655066000
655066000
OTHER
316019120 (5)
316019120 (5)
339160460 (10)
339160410 (10)
31156 (10)
631158000 (10)
339160440 (10)
OTHER
316019770 (6)
316025830 (6)
344094560 (13)
344095060 (13)
344097790 (13)
344162720 (12)
341101480 (7)
316023840 (7)
316023840 (7)
316023840 (7)
341101480 (7)
316023840 (7)
316023840 (7)
316023840 (7)
316023840 (7)
316023840 (7)
316042740 (7)
316023840 (7)
316042740 (7)
341101480 (7)
341101480 (7)
316023840 (7)
316023840 (7)
316023840 (7)
316023840 (7)
316023840 (7)
316023840 (7)
316023840 (7)
316023840 (7)
316023840 (7)
316023840 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
341031290 (7)
Find full schematics/spare parts lists on our website at
www.metabo.ca
107
POINT OF SALES MATERIALS
Description:
Size:
Item No.:
Description:
Size:
Item No.:
Counter Mat
17 3/8" x 22 1/4"
USCM
Description:
Size:
Item No.:
Header Sign
14" x 48"
US1013
Description:
Power Tools
Banner (vinyl)
3' x 5'
US780
Window Decal
4" x 6"
US781
Size:
Item No.:
Description:
Size:
Item No.:
Hard Hat Sticker
2" x 2"
US788
Description:
Size:
Item No.:
Description:
Size:
Item No.:
108
ID Tag for Corded Tools
(inserts into channel on
tool display hook)
2" x 7 1/2"
The letters “USTT” followed by
the 5 digits after the “6” in the
order number for the tool itself,
e.g., USTT00715 for the W7-115 Quick Grinder
ID Tag for Cordless Tools
(except Power Maxx)
2" x 7 1/2"
As for corded tools
POINT OF SALES MATERIALS
Description:
Size:
Item No.:
Description:
Inventory Re-order Tags
(blank) 8 1/2" x 11" sheet
of 40 tags
1" x 1 3/4"
US1030
Description:
Size:
Item No.:
Size:
Item No.:
Item No.:
Description:
Size:
Item No.:
Description:
Size:
Item No.:
Description:
Size:
Size:
Item No.:
Item No. US1021
Item No. US1022
Item No.:
Description:
Size:
Item No.:
multi-fit
Core Bits
Qty
1
Size
1 1/2"
Order
No.
675716000
2
2"
675720000
2
2 1/2"
675726000
1
3"
675730000
1
4"
675740000
10
12mm Center bit
675701000
5
Spline shank bit holder
675910000
3
SDS-max shank bit holder
675915000
5
1" x 11" Extension
675702000
Hooks for use with Wire Grid (item no. US1031)
and Hangbars (item no. US1021 & US1022).
(use only 3/16" x 4" hook on hangbars).
Various
US1024 (3/16" x 4") US1026 (3/16" x 6")
US1025 (1/8" x 6") US1027 (3/16" x 10")
Tool Display Hook
(use with slat wall and
1/8" or 1/4" pegboard)
5" x 8"
US778
US1044
(for large hammers)
Wire Racks for 12" and 14" Cut-off Wheels.
Each rack holds 15-20 wheels depending on
wheel thickness.
4 1/8" w x 8" h x 15" d
US1032 (for 12" whls.) US1033 (for 14" whls.)
Header Sign Holder
Use with abrasives header cards
(order nos. US1028 and US710) and wire grid
(order no. US1031). Mounts on slat wall or
1/4" pegboard.
1 1/2" x 23"
US1020
Hangbar for Accessories
(mounts on slat wall or 1/4"
pegboard). Use hooks shown on next page.
3 1/2" x 23" (item no. US1021)
2" x 23" (item no. US1022)
US1021 (mounts flat against wall) (includes
bracket for header sign)
US1022 (extends out 7" from wall)
Shelf for flat bottom tools
15" w x 3" h x 7" d
US1043
Description:
Size:
Item No.:
Hanging Display for
Core Bits. Holds over 15 bits.
Mounts on slat wall and 1/8" or
1/4" pegboard.
16" x 16" x 8"
US79104 (empty display)
109
220 VOLT TOOLS
Metabo Corporation is leading international manufacturer of professional
grade portable electric power tools for industrial, construction and welding
applications. You can find our tools in over 110 countries world wide!
Therefore, we can offer to supply tools in many different electrical
configurations. Please ask if you encounter an application for voltages other
than the standard 120V tools; most likely, we can supply the tool.
The following tools are normally stocked in limited quantities in 220 volt versions.
Order No.
110
Model
Description
600626761
AD 626
RT. ANGLE DRILL
600626000
BE 622S R+L
DRILL 1/2" DRILL
600264000
W8-115 QUICK
4-1/2" ANGLE GRINDER W/ M14 SPINDLE
US600264761
W8-115 QUICK
4-1/2" ANGLE GRINDER W/5/8-11 SPINDLE
600270000
W11-125 QUICK
5" ANGLE GRINDER W/ M14 SPINDLE
US600270761
W11-125 QUICK
5" ANGLE GRINDER W/5/8-11 SPINDLE
600281000
WE14-125 PLUS 5" VS ANGLE GRINDER W/ M14 SPINDLE
606410000
W23-180
US606410761
W23-180
606415000
W23-230
9" ANGLE GRINDER M14 SPINDLE
US606415761
W23-230
606425000
W25-230
US606425761
W25-230
9" ANGLE GRINDER W/ 5/8-11 SPINDLE
602335420
CS23-355
CHOPSAW
For more information on our products
and services contact us at:
Metabo Canada Inc.
55 Administration Rd. Unit 7
Concord, Ontario
L4K 4G9
Tel.: (905) 761-0023
Fax: (905) 761-0026
Toll Free:
Tel.: 1 877 metabo1 (1 877 638-2261)
Fax: 1 877 metabo9 (1 877 638-2269)
www.metabo.ca

Recip. Saw Blades

Transcription

Similar documents

cut with confidence

Product Catalog

Auktion Nr. 17 Werkstattmaschinen und -einrichtung