GEVA 75 1/8" Solenoid Valves

Transcription

Technical Info
GEVA-75 Index
BACCARA
GEVA 75 Solenoid Operator
2/2, 3/2 Way NC, NO
General Description
7KHZay, NC, NO operator is compatible with
the 3/4-20 UNF operator seat.
Polyurethane encapsulated construction and exclusion of air
assures complete sealing for the coil and lead wires entry.
Wet metal parts are made of passivated Stainless
steel for maximum corrosion protection.
An efficient design makes it possible to achieve high
pressures with a low inrush and holding current and
wide voltage tolerance.
Notes
Coils for other voltages are available, please
contact our technical sales department.
Available with brass adaptor upon request.
How to Order
Example : G75-O-2W1-1
Is a Geva 75 Operator, 2WNC, 24V AC.
Example : G75-O-1032-1
Is a Geva 75 Operator, 1/8” BSP, 3WNC,
1.2 orifice, 24V AC.
2WNC
2W
G75-O
2W
Function
2WNC
Voltage
24V AC
12V AC
12V DC
24V DC
110V AC (1)
1
3W
G75-O
Port
1/8"BSP
1/8"NPT
Function
10
11
3WNC
3WNO
3
4
Orifice
1
1.2
1.6
1
2
3
(1) 110V AC - available in 2/2W only
5.1
1
3
4
5
7
3WNC/3WNO
GEVA-75 Index
Technical Specifications
Voltage:
Solenoid
2W 50 Hz
Current:
2W 60 Hz
3W 50 or 60 Hz
Voltage Inrush [A]
0.3
+10%
0.2
n-20% 0.125
DC
Working Pressure 2W NC
Holding[A]
0.19
Orifice
0.14
0.125
up to 2.0
Pressure (bar)
12
4.5W
Electric connection:
Lead wires 35 cm, 18 Awg
Protection:
IP66
Ambient Temp:
Max 60º C
Fluid Temp:
Max 80º C
Orifice
Materials
Housing:
Reinforced Nylon 66
Plunger and Pole:
Passivated AISI430F
Rubber Seal:
EPDM
Encapsulate:
Polyurethane
1.0
1.2
1.6
AC Pressure (bar) 16
11
6
DC Pressure (bar) 12
9
5
Working Pressure 3W NO
Orifice
1.0
1.2
1.6
Pressure (bar)
16
12
8
3/4" 20TPI UNEF
2+0.2
10
5.5
6.5
Ø12
MaxØ2.0
Operation seating
Dimensions
1/2" NPT
Ø30
CABLE LENGTH
350 (mm)
BLACK WIRE
1/8" BSP/NPT
Ø30
47
1.2
SOLENOID ON
1.2
9
9
54
9
SOLENOID ON
CABLE LENGTH
350 (mm)
BLACK/RED
58
1.2
SOLENOID ON
110V with 1/2 NPT
3/4"-UNEF-20TPI
3/4"-20 UNEF-2B
PLUNGER STROKE 1+- 0.1
Ø24
3/4"-20 UNEF-2B
PLUNGER STROKE 1+- 0.1
3WNC/3WNO
Ø33.5
29.8
2WNC
CABLE LENGTH
350 (mm)
BLACK WIRE
5.2
SV-04-09
Technical Info
GEVA-75 Index
BACCARA
GEVA 75 Latch Solenoid Operator
2/2, 3/2 Way NC, NO
General Description
The 2/2, 3/2 Way, NC, NO operator is compatible with
the 3/4-20 UNF operator seat.
Polyurethane encapsulated construction and exclusion of air
assures complete sealing for the coil and lead wires
HQWU\:HWPHWDOSDUWVDUHPDGHRISDVVLYDWHGVtainless
steel, for maximum corrosion protection.
The two wire operator consists of one coil with exit of two
lead wires. Electrical operation by reversing the current, by
XVLQJ transistors or relays.
The three wire operator consists of one coil and an
integrated electrical circuit.
Notes
Two wires: to pull the plunger up, connect the black
wire (-) and the green to the (+).
Three wires: to pull the plunger up, pulse is given to
the red wire (-). To release the plunger, a pulse is
given to the black wire (-).
To avoid damage to the electronic circuit, operate
the three wires solenoid only by a controller.
Coils for other voltages are available, please
contact our technical sales department.
2WNC
3WNC/3WNO
2W
G75-O
2W
Voltage
VDC
Function
2WNC
B
C
D
6
1
3W
G75-O
Port
1/8"BSP
1/8"NPT
Function
10
11
3WNC
3WNO
Orifice
3
4
1
1.2
1.6
Wires
1
2
3
5.3
two
three
null
a
GEVA-75 Index
Orifice
up to 2.0
Pressure (bar)
12
Orifice
1.0
1.2
1.6
Pressure (bar)
16
11
6
Orifice
1.0
1.2
1.6
Pressure (bar) 16
12
8
Various Controllers Adaption Table
Controller Type
Baccara
Talgil
Motorola
Alextronix
Q.T.
Rainbird
Miracle
Galcon
Other
3/4" 20TPI UNEF
2+0.2
10
5.5
6.5
Ø12
MaxØ2.0
Operation seating
C[µF]
Please consult
Dimensions
Ø30
1/8" BSP/NPT
1.2
47
SOLENOID ON
9
58
CABLE LENGTH
350 (mm)
BLACK/GREEN
3/4"-20 UNEF-2B
PLUNGER STROKE 1± 0.1
3WNC/3WNO
2WNC
5.4
SV-10-09
Technical Info
GEVA-75 Index
BACCARA
GEVA 75 1/8" Solenoid Valves
General Description
GEVA 75 1/8" solenoid valves are based
on GEVA 75 operators mounted on a plastic base.
These bases are available with or without flange,
manual override as standard.
For AC / DC in a latch configuration, manual
override will be supplied upon request.
Applications
They are specially designed for irrigation
control sytems.
Notes
For other availabe voltages and to order
valves manufactured to your specific
requirements, please contact our technical
sales department.
How to Order
Example : G75-A-110302-1
Is a GEVA 75 with flange, 1/8" BSP
3WNC, no manual override,
1.2 orifice, 24V AC coil.
G75-A
Port
Type
with flange
1
without flange 2
Brass
3
(2)
1/8" BSP
1/4" BSP (2)
1/8" NPT
1/4" NPT (2)
Manual (1)
Override
Function
10
20
11
21
2WNC
3WNC
3WNO
1
3
4
(1) When ordering a latch valve, manual override
is optional only in 2W valves
(2) Brass only
(3) For Latch only
(4) Only available in 2W - see dimensions details on page 5.2
5.5
None
Plastic
0
1
(1)
Voltage
Orifice
1
1.2
1.6
1
2
3
Wires
1
3
4
5
6
7
B
C
D
two
three
null
a(3)
GEVA-75 Index
Max. Pressure
Ports size:
1/8" BSP or NPT
Materials:
Base & manual override:
Function
Orifice
AC
DC
DC latch
2WNC
up to 2.0
12
12
12
1
16
12
16
1.2
11
9
11
Reinforced Nylon
Seals:
Pressure bar
3WNC
EPDM
1.6
6
5
6
1
16
16
16
See solenoid specifications
1.2
12
12
12
Pressure:
See table
1.6
8
8
8
Mounting:
Flange or by two taping screws No.6
Voltage:
12, 24, 110, 230 AC
Solenoid:
3WNO
12, 24 DC
9-12, 24 V Latch
Protection class IP66
Dimensions
59
65
1/8
70
77
22
3W
For taping screw
No. 6
15
-
2WNC
M6 THRU
TYPx2
37
C
15
B
25
A
15
M5 x0.8 DEEP 8
TYPx2
7.3
20
22
CABLE LENGTH
350 (mm)
Ø30
Ø30
A
B
B
C
A
Manual
Override
1/8" BSP/NPT
BOTH ENDS
25
1/8" BSP/NPT
BOTH ENDS
1/8" or 1/4"
BSP/NPT
TYPx2
32
48.3
Brass
35.8
Plastic
5.6
SV-11-11
Technical Info
GEVA-75 Index
BACCARA
GALIT Pilot Operated Solenoid Valve
3/2 Way NC, NO
General Description
*$/,7SLORWRSHUDWHGZay NC, NO
VROHQRLGYDOYHVDre specially designed
to control medium and large valves.
These valves are controlled by various
options of AC, DC and Latch G75 coils.
$OWKRXJKWKH\DUH compact, the valves enable
large flow pass.
Notes
Minimum pilot pressure of 1 bar is required.
Mounting Bracket
GALIT
Mounting
Bracket
Voltage
Port
Wires
1/8"BSP
10
1
without
0
two
1/8"NPT
11
3
with
1
three
4
5
6
B
C
D
(1) For latch only
5.7
null
a(1)
GEVA-75 Index
Functions:
3/2 Way NC or NO
Ports size:
1/8" BSP or NPT
Orifice:
5mm
Pressure range:
1 - 10 bar
Temperature range:
Ambient : -10º - 50º C
Fluid : 5º - 50º
Materials:
Main Valve:
Reinforced Nylon
Seals:
NBR
Solenoid:
See solenoid specifications
Media:
Water
Coil Voltage:
All G75 coil voltages
Dimensions
IN
1/8" BSP / NPT
151
AUTO
EX N.O
OPEN
2
4
CLOSE
OUT
IN N.C
33
56
IN N.O
EX N.C
5.8
SV-10-09
Technical Info
GEVA-75 Index
BACCARA
GEVA 75 Inline Electric Valve
3/4", 1", 1-1/2", 2" 2/2 Way, NC
General Description
GEVA 75 control valves provide high hydraulic
performances in fluid control.
These durable valves are efficiently designed
and constructed from advanced technology
plastics, thus requiring very low maintenance.
Notes
Made of advanced technology plastics,
synthetic elastomers, stainless steel and
plastics resistant to corrosion.
They work in a wide range of pressures.
Manual override in all the valves with
internal draining.
Progressive opening and shut off which
prevents water hammer.
Very low head loss with high flows.
Easy maintenance. Total access to the
internal parts through the cover of the valve.
Wide range of possibilities such as electric
valves, pressure regulating etc.
Applications
Electric remote control
Farm and gardening irrigation
Advanced computerized irrigation
Level control
Filtration systems
Fertilization systems
Environmental control
How to Order
Example : G75-S-501051
Is a GEVA 75 3/4" BSPT inline electric
hydraulic valve, 2WNC, with flow control,
24V AC.
G75-S
Port
3/4" BSPT
3/4" NPT
1" BSPT
1" NPT
1" slip in
1-1/2" BSPT
1-1/2" NPT
2" BSPT
2" NPT
Manual
Override
Function
50
51
60
61
62
70
71
80
81
2WNC
1
None
Plastic
Handle
Flow control
0
1
2
(1) 3/4”, 1” valves
(2) For latch only
(3) Only available in 2W - see dimensions details on page 5.2
5.11
with
without(1)
5
6
Wires
Voltage
1
3
4
5
6
7
B
C
D
two
three
null
a(2)
GEVA-75 Index
Size:
3/4", 1", 1-1/2” & 2”
Connection:
Female BSPT or NPT thread
Head loss for fully open valve
1” PVC - slip in pipe
2
Pressure range: 0.3 - 10Kg/cm
Max.Fluid Temp: 50º
Geva 75
1"
Solenoid:
H
(kg/cm2)
3/4
"
0.3 - 10bar (1-1/2”-2”)
2WNC solenoids, all voltages
RECOMMENDED WORKING ZONE
AC, DC and latch (1” PVC valve)
Materials:
Body & Cover:
Reinforced Nylon
PVC (1” PVC valve)
Spring :
AISI 302
Diaphragm:
PVC
Seals:
Buna - N
Screws:
AISI 304
Q (m3/h)
H
(kg/cm2)
Dimensions
Size
A
B
2"
1-1
/2"
RECOMMENDED
WORKING ZONE
C
D
Weight
3/4"
105 110 105
81
230g
1"
112 110 112
81
230g
1-1/2"
180 160 126 127
740g
2"
190 170 126 127
790g
Q (m3/h)
3/4" & 1"
112
1" PVC slip in
81
127
With flow control
1-1/2" & 2" With Integrated Solenoid
Without flow control
5.12
SV-11-11
GEVA-75 Index
BACCARA
GEVA 75 Inline Hydraulic Valve
3/4", 1", 1-1/2", 2" 2/2 Way, NO
General Description
GEVA 75 control valves provide high hydraulic
These durable valves are efficiently designed
and constructed from advanced technology
plastics, thus requiring very low maintenance.
Notes
Made of advanced technology plastics,
synthetic elastomers, stainless steel and
plastics resistant to corrosion.
Progressive opening and shut off which
prevents water hammer.
Easy maintenance. Total access to the
internal parts through the cover of the valve.
Wide range of possibilities such as electric
valves, pressure regulating etc.
A "drill" body can be ordered upon special
request.
Applications
Level control
Filtration systems
How to Order
Is a GEVA 75 3/4" BSPT inline hydraulic
valve, 2WNC, with flow control.
G75-S
Port
3/4" BSPT
3/4" NPT
1" BSPT
1" NPT
1" slip in
1-1/2" BSPT
1-1/2" NPT
2" BSPT
2" NPT
Function
50
51
60
61
62
70
71
80
81
2WNO
1
Flow control
with
without (1)
5
6
(1) 3/4", 1" valves only
5.13
Technical Info
GEVA-75 Index
Size:
3/4", 1", 1-1/2" & 2"
Connection:
Female BSPT or NPT thread
1" PVC - slip in pipe
2
Pressure range: 0.3 - 10Kg/cm
0.3 - 10bar
Body & Cover:
1"
Materials:
3/4
"
H
(kg/cm2)
Max.Fluid Temp: 50º
Reinforced Nylon
RECOMMENDED WORKING ZONE
PVC (1" PVC valve)
Spring :
AISI 302
Q (m3/h)
Diaphragm:
PVC
Seals:
Buna - N
Screws:
H
(kg/cm2)
Dimensions
Size
A
RECOMMENDED
WORKING ZONE
B
C
D
E
ØG
Weight
3/4"
105 110
77
81
52.5 1/8" NPT/BSP
230g
1"
112 110
84
81
48.5 1/8" NPT/BSP
230g
180 160 998 127
92 1/4" NPT/BSP
740g
190 170
94 1/4" NPT/BSP
790g
1-1/2"
2"
2"
1-1
/2"
AISI 304
98
127
Q (m3/h)
3/4" & 1"
1" PVC slip in
1/8" BSP
Thread
84
(G)
E
127
81
With flow control
1-1/2" & 2" With Integrated Solenoid
Thread
(G)
A
E
E
B
5.14
Thread
(G)
SV-11-11
Technical Info
GEVA-75 Index
BACCARA
GEVA 75 Pilot Operated
3/8", 1/2" 2/2 Way NC
General Description
GEVA 75 pilot operated 2/2 Way NC
solenoid valves are recommended for
applications where high flow at high
pressure is required. They can be used
in control and automation systems
The typical applications are:
industrial furnace, heating equipment,
burners, oil and gas, autoclaves, dental
equipment, instrumentation, car washers,
machine industries and irrigation.
Notes
The working pressure is 12 bar.
A minimum pressure of 0.5 bar
is required for operation.
To order valves manufactured to your
specific requirements, please contact
our technical sales department.
How to Order
Example : G75-S-4401N-1
Is a GEVA 75 Pilot operated 1/2" BSP,
2WNC, NBR seals, 24V AC.
G75-S
Port
Body
Nylon
4
3/8"BSP
3/8"NPT
1/2"BSP
1/2"NPT
Function
30
31
40
41
2WNC
Voltage
Seals
1
(1) For latch only
(2) Only available in 2/2W - see dimensions details on page 5.2
5.15
NBR
EPDM
N
E
Wires
1
2
3
4
5
6
7
B
C
D
two
three
null
a(1)
GEVA-75 Index
Functions:
2/2 Way NC
Ports size:
3/8", 1/2" BSP or NPT
Orifice:
12mm
Pressure and flow:
0.5 -12 bar Kv 35 L/min
Temperature range:
Fluid : max 80º C
Ambient : -10º C to 50º C
Solenoid:
Geva 75
2WNC solenoids, all voltages
Materials:
Body & cover:
Reinforced Nylon
Spring:
AISI 302
Diaphragm:
NBR, EPDM
Seals:
NBR, EPDM
Screws:
AISI 304
Dimensions
5.16
SV-11-11
Technical Info
GEVA-75 Index
BACCARA
GEVA 75 Manifold Installation
General Description
The GEVA 75 manifold installation provides a
turn-key solution.
Available with various types of GEVA 75
solenoids, functions and voltages.
Pilot Operated
G75
How to Order
Example : G75-M-541031
Is a 5 station Geva 75 manifold 3W NO,1/8"BSP,
direct operating 1.6 orifice, 24V AC solenoids.
GEM-SOL
G75-M
#
stations
Type
G75
GEM-SOL
Pilot Op.
1
2
3
3
4
5
6
7
8
9
10
11
12
3
4
5
6
7
8
9
10
11
12
Function
without
sol
2WNC
3WNC
3WNO
Pilot (1)
operated NC
Pilot (1)
operated NO
Orifice (2)
Port
0
1/8"BSP
1/8"NPT
1
3
4
5
6
(1) Only available for Pilot Operated
(2) GEM-SOL orifices are :
3/2 Way NO - 1.6
3/2 Way NO - 2.4
G75 orifices are :
3/2 Way NO/NC - 1.2
(3) For Latch only
(4) Only available in 2/2W - see dimensions details on page 5.2.
Please consult with our technical sales department.
5.17
10
11
1
1.2
1.6
Pilot operated(1)
Wires
Voltage
1
2
3
5
1
3
4
5
6
7
B
C
D
two
three
null
a(3)
GEVA-75 Index
Direct Operated
Hose Nipple
Tube
Hose Nipple
Tube
Pilot Operated
#
stations
3
4
5
6
7
8
9
10
11
12
A
261
348
435
522
609
696
783
870
957
1044
B
130.5
174
217.7
261
304.5
348
391.5
435
478.5
522
5.18
SV-11-11
Technical Info
GEVA-75 Index
BACCARA
GEVA 75 Irrigation Controllers
General Description
Stand-alone battery driven irrigation controller
timer with a G75 2WNC 9VDC latch coil
connected. Powered by a single 9V battery.
Can operate any valve equipped with
R
3/4" UNEF solenoid cavity (Richdel type).
Notes
G75 One Valve
Dust and water tight.
Various mounting options, on valve and wall.
High quality alkaline battery included.
Three automatic irrigation controllers, plus
manual operation.
Please consult with our technical sales department
for further information on the controllers’
compatibility with various coils.
Options:
Solar Panel
How to Order Table
1)Example : G75-C-2-50-60
G75 Two Valves
Is a Geva 75 Two Valves controller :
Valve 1 : 3/4" BSP, Valve 2 : 1" BSP
2) Example : G75-C-4-60-50-70-80-00
Is a Geva 75 Four Valves controller :
Master Valve : 1" BSP, Valve 1 : 3/4" BSP, Valve 2 : 1-1/2" BSP,
Valve 3 : 2" BSP, Valve 4 : No Valve
3) Example : G75-C-2-60-G75-A-110102
Is a Geva 75 Two Valves controller :
Valve 1 : 1" BSP
Valve 2 : G-75-A with flange, 1/8"BSP, 2WNC, No manual override, 1.2 orifice
G75-C
Type of
Controller
One Valve
Two Valves
Four Valves
1
2
4
Valve
Valve
No valve
1/2"BSP
1/2"NPT
3/4"BSP
1"BSP
1" NPT
1-1/2" BSP
1-1/2" NPT
2" BSP
2" NPT
00
40
41
50
60
61
70
71
80
81
G75-A *
No valve
1/2"BSP
1/2"NPT
3/4"BSP
1"BSP
1" NPT
1-1/2" BSP
1-1/2" NPT
2" BSP
2" NPT
Valve
No valve
1/2"BSP
1/2"NPT
3/4"BSP
1"BSP
1" NPT
1-1/2" BSP
1-1/2" NPT
2" BSP
2" NPT
00
40
41
50
60
61
70
71
80
81
G75-A *
Valve
00
40
41
50
60
61
70
71
80
81
G75-A *
G75-A *
* G75-A
Type
with flange
1
without flange 2
Brass
3
Port
1/8" BSP
1/4" BSP (1)
1/8" NPT
1/4" NPT (1)
Manual
Override
-
Function
10
20
11
21
2WNC
3WNC
3WNO
1
3
4
0
Orifice
1
1.2
1.6
No valve
1/2"BSP
1/2"NPT
3/4"BSP
1"BSP
1" NPT
1-1/2" BSP
1-1/2" NPT
2" BSP
2" NPT
1
2
3
(1) BRASS only
5.19
G75 Four Valves
Valve
00
40
41
50
60
61
70
71
80
81
No valve
1/2"BSP
1/2"NPT
3/4"BSP
1"BSP
1" NPT
1-1/2" BSP
1-1/2" NPT
2" BSP
2" NPT
G75-A *
00
40
41
50
60
61
70
71
80
81
GEVA-75 Index
Mechanical
Electrical
Software
Mounting Options
Option
Wall Mounting
One Valve
Vertical Mounting
Horizontal Mounting
Two Valves
Four Valves
Once daily, at the
same time
Up to three starts
per day
Up to three starts
per day
Once daily, on
selected days
Starts select
Starts select
Day select
Day select
Season adjustment
10% - 200%
Season adjustment
10% - 200%
Off
Off
Three starts per
day
Solar Panel
Off
Master Valve will be
opened for each
command
5.20
SV-10-09
Technical Info
GEVA-75 Index
BACCARA
GEVA 75 Irrigation Window Controllers
General Description
Stand-alone battery driven irrigation controller
timer with a G75 2WNC 9VDC latch coil
connected. Powered by a single 9V battery.
Can operate any valve equipped with
R
3/4" UNEF solenoid cavity (Richdel type).
G75 Window
Notes
Dust and water tight.
Various mounting options, on valve and wall.
Three automatic irrigation controllers, plus
manual operation.
Please consult with our technical sales department
for further information on the controllers’
compatibility with various coils.
Options:
Solar Panel
G75 Window+
How to Order Table: G75 Window
Example : G75-C-1W-50
How to Order Table: G75 Window+
Example : G75-C-1W+-GEM-A-21045N0
Is a Geva 75 Window controller with 3/4”BSP valve.
Is a Geva 75 Window+ controller with :
GEM-A brass valve, 1/8" BSP, 3WNO, 2.4 orifice,
NBR, no manual override.
G75-C-1W
Valve
No valve
3/4"BSP
1"BSP
1" NPT
1-1/2" BSP
1-1/2" NPT
2" BSP
2" NPT
00
50
60
61
70
71
80
81
G75-C-1W+
Refer to How to Order
Section of GEM-SOL
valves.
Consult with us to
discuss your specific
requirements.
G75-A *
This controller will only operate with G75 operators.
* G75-A
Type
Port
10
with flange
1 1/8" BSP
(1) 20
without flange 2 1/4" BSP
11
Brass
3 1/8" NPT
1/4" NPT (1) 21
Valve
Manual
Override
Function
2WNC
3WNC
3WNO
1
3
4
-
0
Orifice
1
1.2
1.6
1
2
3
(1) BRASS only
5.21
GEVA-75 Index
Mechanical
Electrical
Software
Mounting Options
Option
Wall Mounting
Vertical Mounting
Horizontal Mounting
Solar Panel
Window +
Window
Set start and end
hours
Set start and end
hours
Set On time (1
second to 12 hours)
Set On time (1
second to 12 hours)
Set Off time (1 min
to 12 hours)
Set Off time (1 min
to 12 hours)
Day select
Day select
Off
Off
High-powered
5.22
SV-04-09
Technical Info
GEVA-75 Index
BACCARA
GEVA 75 Multi-Zone DC & AC Irrigation Controller
General Description
The Geva 75 multi-zone DC irrigation controller is a new
generation of irrigation controllers, with a user friendly menu
driven interactive software. It is a stand alone, battery power
driven, 4 to 8 zones irrigation controller. Powered by a single
9V battery. Can operate G75 9V latch coils or equivalent.
Geva 75 multi-zone AC is a 24V AC , 4 to 8 zones irrigation
controller with an integrated backup battery.
Can also operate G75 9V latch coils or equivalent.
Notes
For indoor or outdoor use.
Large graphics LCD provides easy reading.
Menu driven interactive software.
Built-in multi-lingual menu: English, Spanish, Italian,
French, Portuguese and Hebrew.
Weekly or daily scheduled programming.
Two factory preset programs included.
Master valve output, manual irrigation, system
test procedure and rain sensor input included.
How to Order
Example : G75-C-81
Is a Geva 75 8 zones DC irrigation controller.
G75-C
Type
8 zones
Voltage
8
9V DC
24V AC*
1
2
* AC controller
Adaptor for outdoors
Adaptor for indoors
5.23
GEVA-75 Index
Mechanical specifications
Software features
Electrical specifications
Dimensions
5.24
SV-04-09
GEVA-75 Index
BACCARA
3/4", 1", 1-1/2", 2" Line pilot
General Description
GEVA 75 control valves, 3/4", 1", 1-1/2" and 2" provide
high hydraulic performances in fluid control.
These durable valves are efficiently designed and constructed
from advanced technology plastics, thus requiring very
low maintenance.
Notes
Supplied with solenoid but without accessories.
Applications
Level control
Filtration systems
How to Order
Example : G75-S-704H51
Is a GEVA 75 1-1/2"BSP inline hydraulic valve,
2WNC with flow control, with 3WNO solenoid,
24V AC
G75-S
Port
3/4"BSP
3/4"NPT
1"BSP
1"NPT
1-1/2"BSP
1-1/2"NPT
2" BSP
2" NPT
Function
50
51
60
61
70
71
80
81
3WNO
4H
Flow control
with
5
will be supplied only when specifically requested.
(2) For latch only.
SV-04-09
5.25
Voltage
1
24VAC
3
12VAC
4
12VDC
5
24VDC
24Latch(23Ω) 6
7
110VAC
6 Latch (4Ω) B
12 Latch (9Ω) C
16 Latch (12Ω) D
Wires(1)
two
three
null
a(2)
GEVA-75 Index
BACCARA
1-1/2", 2" External pilot 3W
General Description
GEVA 75 control valves, 1-1/2" and 2" provide high
hydraulic performances in fluid control.
These durable valves are efficiently designed and
constructed from advanced technology plastics, thus
requiring very low maintenance.
Notes
Pilot pressure should be higher than line pressure.
Applications
Level control
Filtration systems
Low pressure
For contaminated water
How to Order
2WNC with flow control, with 3WNO, 24V AC solenoid.
G75-S
Port
1-1/2"BSP
1-1/2"NPT
2" BSP
2" NPT
Function
70
71
80
81
3WNC
Flow control
4
with
5
Voltage
1
24VAC
3
12VAC
4
12VDC
5
24VDC
24Latch(23Ω) 6
6 Latch (4Ω) B
12 Latch (9Ω) C
16 Latch (12Ω) D
Wires(1)
two
three
null
a (2)
(2) For latch only.
5.26
SV-04-09
GEVA-75 Index
BACCARA
1-1/2", 2" Level float valve
General Description
constructed from advanced technology plastics,
thus requiring very low maintenance.
Applications
Level control
Filtration systems
Solenoid and accessories for demonstration only
How to Order
2WNC with flow control.
G75-L
Port
1-1/2"BSP
1-1/2"NPT
2" BSP
2" NPT
SV-04-09
Function
70
71
80
81
2WNC
Flow control
1
with
5
5.27
Voltage
No coil
hydraulic
0
GEVA-75 Index
BACCARA
GEVA 75 Inline Hydraulic Valve 1-1/2", 2"
Level float valve with shut off solenoid
General Description
Applications
Level control
Filtration systems
How to Order
G75-L
Port
1-1/2"BSP
1-1/2"NPT
2" BSP
2" NPT
Function
70
71
80
81
2WNC
Voltage
Flow control
1
with
5
1
24VAC
3
12VAC
4
12VDC
5
24VDC
24Latch(23Ω) 6
6 Latch (4Ω) B
12 Latch (9Ω) C
16 Latch (12Ω) D
Wires(1)
two
three
null
a (2)
(2) For latch only.
5.28
SV-04-09
GEVA-75 Index
BACCARA
GEVA 75 Inline Hydraulic NC Valve
1-1/2", 2" External solenoid 3W NO
General Description
Applications
Level control
Filtration systems
How to Order
G75-S
Port
1-1/2"BSP
1-1/2"NPT
2" BSP
2" NPT
Function
70
71
80
81
2WNC
Voltage
Flow control
1
with
5
1
24VAC
3
12VAC
4
12VDC
5
24VDC
24Latch(23Ω) 6
6 Latch (4Ω) B
12 Latch (9Ω) C
16 Latch (12Ω) D
(2) For latch only.
SV-04-09
5.29
Wires (1)
two
three
null
a(2)
GEVA-75 Index
BACCARA
GEVA 75 Inline Hydraulic NO Valve
1-1/2", 2" External solenoid 3W NC
General Description
Notes
The valve is identical to 2W NC valve,
2W NO function is a result of the solenoid.
Applications
Level control
Filtration systems
How to Order
2WNO with flow control.
G75-S
Port
1-1/2"BSP
1-1/2"NPT
2" BSP
2" NPT
Function
70
71
80
81
2WNO
2
Flow control
Voltage
5
24VAC
12VAC
12VDC
24VDC
24Latch(23Ω)
6 Latch (4Ω)
12 Latch (9Ω)
16 Latch (12Ω)
with
Wires(1)
1
3
4
5
6
B
C
D
two
three
null
a (2)
(2) For latch only.
5.30
SV-04-09
GEVA-75 Index
BACCARA
3/4",1",1-1/2", 2" Manual selector
General Description
GEVA 75 control valves, 3/4", 1", 1-1/2" and 2" provide
Applications
Level control
Filtration systems
How to Order
Example : G75-SM-70150
Is a GEVA 75 1-1/2"BSP inline hydraulic
valve 2WNC with flow control and a
manual selector.
G75-SM
Port
3/4"BSPT
3/4"NPT
1"BSPT
1"NPT
1-1/2"BSPT
1-1/2"NPT
2" BSPT
2" NPT
SV-04-09
Function
50
51
60
61
70
71
80
81
2WNC
Voltage
Flow control
1
with
5
No coil
hydraulic
5.31
0
GEVA-75 Index
BACCARA
GEVA 75 Inline Hydraulic NC Valve 1-1/2", 2"
External solenoid 3W NO and a Manual selector
General Description
Applications
Level control
Filtration systems
How to Order
Example : G75-SM-70150
valve 2WNC with flow control and a
manual selector.
G75-SM
Port
1-1/2"BSPT
1-1/2"NPT
2" BSPT
2" NPT
Function
70
71
80
81
2WNC
Voltage
Flow control
1
with
5
No coil
hydraulic
5.32
0
SV-04-09
GEVA-75 Index
BACCARA
3/4", 1", 1-1/2", 2" Pressure relief
General Description
GEVA 75 control valves, 3/4",1",1-1/2" and 2" provide
Applications
Level control
Filtration systems
How to Order
Example : G75-SR-701503
valve 2WNC with flow control set to 3-6 bar.
G75-SR
3/4" BSPT
3/4" NPT
1" BSPT
1" NPT
1-1/2" BSPT
1-1/2" NPT
2" BSPT
2" NPT
SV-04-09
Flow control
Function
Port
50
51
60
61
70
71
80
81
2WNC
1
with
without
5
6
Set pressure
(bar)
Voltage
No coil
hydraulic
5.33
0
1-3
2-5
3-6
4-7
1
2
3
4
GEVA-75 Index
BACCARA
*(9$,QOLQH9DOYH(OHFWULFDO
Hydraulic pressure reducing
General Description
These valves, together with the XR100 3 way pressure
reducing, provide compact, efficient and accurate
high flow pressure reducers.
Notes
Supplied assembled with a solenoid and accessories.
A finger filter has been installed at the pilot pressure
supply. Clean when necessary.
The XR100 has a three positions manual override:
AUTO: for automatic operation (valve is open when
solenoid is energized)
MANUAL: valve is kept open
CLOSE: valve is kept closed.
Pilot pressure must be equal or higher to line
pressure.
How to Order
Port
G75-PR
Function
Flow control
Voltage
Example : G75-PR-70151
Is a GEVA 75 1-1/2"BSP electric
pressure reducing valve 2WNC with
flow control, with a 24 VAC solenoid.
1-1/2"BSPT
1-1/2"NPT
2" BSPT
2" NPT
5.34
70
71
80
81
2WNC
1
with
5
without
24V AC
9-12VDC Latch
12V AC
12V DC
24V DC
0
1
2
3
4
5
SV-04-09
GEVA-75 Index
BACCARA
*(9$,QOLQH9DOYH(OHFWULFDO Hydraulic
pressure reducing
General Description
GEVA 75 1" control valves provide high hydraulic
These valves, together with the XR100 3 way pressure
reducing, provide compact, efficient and accurate
high flow pressure reducers.
Notes
Supplied assembled with a solenoid and accessories.
A finger filter has been installed at the pilot pressure
supply. Clean when necessary.
The XR100 has a three positions manual override:
AUTO: for automatic operation (valve is open when
solenoid is energized)
MANUAL: valve is kept open
CLOSE: valve is kept closed.
A minimum pressure differential of 1 bar is required.
How to Order
Port
G75-PR
Function
Flow control
Voltage
Example : G75-PR-60161
Is a GEVA 75 1" BSP electric
pressure reducing valve 2WNC without
flow control, with a 24 VAC solenoid.
SV-04-09
1"BSPT
1"NPT
5.35
60
61
2WNC
1
without
6
without
24V AC
9-12VDC Latch
12V AC
12V DC
24V DC
0
1
2
3
4
5
GEVA-75 Index
5.36
GEVA-75 Index
BACCARA
GEVA 75 Inline Hydraulic Valves 3/4", 1",
1-1/2 ", 2" 2/2 Way NC, Zero pressure
General Description
GEVA 75 control valves 3/4" - 2" provide high hydraulic
Notes
Made from synthetic elastomers, stainless steel
and plastics resistant to corrosion.
Manual override in all the valves with internal
draining.
Minimum pilot pressure 1.5 bar above line
pressure.
Easy maintenance. Total access to the internal
parts from the cover of the valve.
Applications
Drain systems
Close systems
How to Order
Example : G75-Z-60151
Is a GEVA 75 1" BSP inline electric valve, 2WNC
with flow control, 24V AC for zero differential pressure.
G75-Z
Function
Port
3/4"BSPT
3/4"NPT
1" BSPT
1" NPT
1-1/2" BSPT
1-1/2" NPT
2" BSPT
2" NPT
50
51
60
61
70
71
80
81
2WNC
Flow control
1
with
without (1)
5
6
(1) 3/4", 1" valves only
5.37
Technical Info
GEVA-75 Index
Size:
3/4", 1", 1-1/2", 2"
Connection:
Female BSPT
or NPT thread
Line: 0-6 bar
50ºC
Materials:
Body & Cover:
H
(kg/cm2)
2"
above line pressure
Max.Fluid Temp:
1-1
/2"
Pilot: 1.5 bar
1"
3/4
"
Pressure range:
RECOMMENDED
WORKING ZONE
Reinforced Nylon
Spring :
AISI 302
Q (m3/h)
Diaphragm:
PVC
Seals:
Buna - N
Screws:
Dimensions
AISI 304
Size
A
B
C
Weight
3/4"
117 110
81
230g
1"
124 110
81
230g
1-1/2"
180 160 126 740g
2"
190 170 126 740g
With flow control
5.38
SV-04-09
Technical Info
GEVA-75 Index
BACCARA
Digital Differential Pressure Gauge Switch (D.D.P.G.S.)
General Description
The Baccara Digital Differential Pressure Gauge Switch
combines a gauge and a switch in one unit, which allows
the user to program a wide range of monitoring and
switching parameters to suit specific applications.
It is specially designed for filter flushing systems.
With its LCD display, user friendly interface for
setting the working parameters and the IP66
environmental protection, this unit gives a reliable
and easy to use solution for automatic filters.
With the aid of the latch solenoid driver it is
possible to upgrade a simple manual filter
to an automatic one.
Note
See instruction manual for further information
”H” pressure must be higher than ”L” pressure.
Maximum ”H” pressure 200 psi/14 bar.
This unit can be used as a manometer up to
99 psi or 7 bar.
3OHDVHFRQVXOWZLWKRXUWHFKQLFDOVDOHVGHSDUWPHQW
for special applications.
How to Order
H
Example: G75-DP-1BD
Is a digital differential pressure gauge switch
with a mounting bracket and a solenoid
driver.
G75-DP
Type
Stand
alone
L
Accessories
1
Mounting
Bracket
Latch Solenoid
Driver
B
D
5.39
GEVA-75 Index
Mechanical specifications
Disconnect low pressure before high pressure
Connect the tubes from the unit so that
they point downwards
Programmable Settings
Manual Operation
PSI or BAR display
Time interval between pressure
measurements
Electrical specifications
Contact closed time
Power supply 9 - 24 VDC or 12-24VAC
Time interval between contact closure
Low power detect
Zero calibration
Dry contact (N.O.) 0.5A at 24VAC
Internal memory to retain “Set-up Data”
Display
at power down.
The LCD display shows the actual Differential
Pressure (DIF) and the pressure differential
Mounting
trigger setting (SET) continuously when power
2 ft/60 cm cable + 4 wires
is connected. When the switch contacts are
RED + BLK - power supply
closed, this is indicated by displaying On.
GRN / WHT N.O. contact
Pressure ports 1/8” BSP/NPT (male)
Display resolution:
High pressure port is marked by the letter "H"
1 PSI in the range 0-99psi.
on the housing
0.1 BAR in the range 0.0-7.0 BAR.
Connect high pressure before low pressure
Dimensions
43
ø 60
ø 57.7
41
1/8” BSP
TYPX2
89.5
M5
TYPX2
25
.8
58.8
(60)
5.40
SV-04-09
Technical Info
GEVA-75 Index
BACCARA
GEVA 75 Long Distance Operator (LDO)
2/2, 3/2 Way NC, NO
General Description
7KHORQJGLVWDQFHRperator makes it possible
to activate a solenoid valve by using a small
section conductor at a distance of up to 5 km
from the voltage source.
The valves' main advantage is the reduction
in conduit cost.
Allows use of a lower power source.
The device is supplied with G75 2/2 or 3/2 Way
NC, NO solenoid valve.
Specially suited for irrigation control.
Notes
This solenoid is designed to operate only
with a Baccara valve.
To order valves manufactured to your specific
requirements, please contact our technical sales
department
How to Order
Example : G75-LDO-11021
Is a Geva 75 LDO 2WNC, 1/8"BSP, 1.2mm orifice,
24V AC Long Distance Operator.
G75-LDO
Function
2WNC
3WNC
3WNO
Port
1
3
4
None
1/8"BSP
1/8"NPT
Orifice
00
10
11
None(for 2W)
1
1.2
1.6
Voltage
0
1
2
3
24V AC &
12-24 V DC
5.41
9
GEVA-75 Index
Voltage:
12 - 24V DC or 24V AC
Current:
Holding 4 mA
Power:
12V - 50mW
Orifice
Pressure (bar)
24V - 100mW
Protection:
IP67
Ambient Temp:
Max 60º C
Weight :
80 gm
Lead Connection 28cm:
up to 2.0
12
Orifice
1.0
1.2
1.6
Pressure (bar)
16
11
6
Red / Black - power supply
Green / Black - coil
Materials
Housing:
PP
Encapsulate:
Epoxy
Voltage
Conduit
Distance
section (mm2)
(km)
Orifice
1.0
1.2
1.6
Pressure (bar)
16
12
8
Delay Time (sec)
On
Off
12 / 24
0
0.5
3
1
12
5
0.5
12
1
24
5
0.5
8
1
Dimensions
79
83
50
87
63.2
94
38.5
50.5
2W
3W
5.42
SV-04-09
Technical Info
GEVA-75 Index
BACCARA
GEVA 75 (GEM-SOL) Operator 2/2, 3/2 Way
General Description
The operator is designed to be assembled on a valve
or a counterpart, forming a solenoid valve.
Depending on the operator and valve construction, all
functional versions are possible: 2/2-3/2 way
normally closed or open.
The operator is mounted on all our solenoid valves.
It may be used with alternating or direct current.
It is based on the GEM-SOL operator.
Notes
Operator seat should be designed according
to our specifications.
Operator for DC is without shading ring and may
not be used for AC.
ADC operators and valves are suitable for use
with AC 8W or DC 10W. When an order of an
operator or a valve is without a coil, ADC
operators will be supplied.
When assembling coil, take care not to tighten
nut excessively.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
How to Order
Example : G75-OG-2W1-N-341
Is a G75 (GEM-SOL) Operator, 2W NC, NBR, 24V AC 5.5W 50 Hz with connector.
Example : G75-OG-1034-V-341
Is a G75 (GEM-SOL) Operator, 1/8”BSP, 3W NC,Orifice 2.0, Viton, 24V AC 5.5W 50 Hz with connector.
2W
G75-OG
2W
2W NC
3W
G75-OG
1/8"BSP
1/8"NPT
10
11
3W NC
3W NO
NBR
Viton
EPDM
1
Function
Port
Voltage
Seals
Function
Orifice
3
4
0.8
1.2
1.6
2.0
2.4
3.0
1
2
3
4
5
6
5.43
N
V
E
W/out coil
6
12
24
48
110
120
230
240
other
Connector
Power
0
1
2
3
4
5
6
7
8
9
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
AC5.5W 50Hz
AC5.5W 60Hz
AC2.5W
DC5.5W
DC3.5W
0
1
2
3
4
5
6
7
8
without
with
with LED
with bi
color LED
flying leads coil
with 1/2" Hub
surge protection
with LED
other
0
1
2
3
4
5
6
9
GEVA-75 Index
Function:
2/2, 3/2 way NC or NO
Operator assembly:
Orifice size:
0.8 up to 3mm
hexagonal 22 to the
Pressure range(bars):
See solenoid valve performances
valve body and fixing coil
Flow factor Kv(l/min):
See solenoid valve performances
by one nut G1/4" hexagonal
Temperature range:
Fluid: According to seals.
19mm, of metal or plastic.
Ambient: -10º C to +50º C
Response Time:
16 to 36 ms complete cycle
Cycling rate:
120 cyl/min
By screwing 3/4"-20 UNEF-28
Coil position:
Any position, may be turned
360º on the operator
Coil data:
See technical GEM-SOL coil
Materials in contact
data
with fluid:
Operator:
Coil Voltage:
All Baccara coils voltages ±10%
Stainless steel
AC 8W, 5.5W
series AISI 300 & 400
DC 10W, 5.5W
Shading ring:
standard - copper
upon request - silver and aluminium
Orifice (upper):
Stainless steel
Weight:
180g
Media:
Air, gas, water, fuel, oil etc
Threads on operator tube: G1/4" male - G1/8" or 1/8" NPT female
to connect exhaust, muffler, etc.
Dimensions
31
3/4" 20TPI UNEF
1/8”BSP/NPT
2+0.2
5.5
8.2
57
6.5
Ø12
10
19
2.1
Operation seating
15
35
MaxØ2.0
3/4”-20 UNEF-28
Plunger stroke 1.1
±0.1mm
61
Operator seating
5.44
SV-07-11

GEVA 75 1/8" Solenoid Valves

Transcription

Similar documents

21000-Gallon Frac Tank - E-Tank

Expanding Gate Valve Brochure

SHUTTLE VALVE “SHV”

Pneumatic Isolation Valves

Check Valves - Stream-Flo

Weathermatic - Nitro Valves - Irrigation-Mart

Structure Of August Srew Air Compressor

TWO-PIECE VALVE COVERS

KIBBLEWHITE 6mm VALVE INSTALLATION NOTES