Here it Comes! n C Proudly Introduces the Cat CT660 Vocational

Transcription

Here it Comes! n C Proudly Introduces the Cat CT660 Vocational
Consignments
GET YOUR MACHINE
READY FOR BUSINESS
An N C MACHINERY PUBLICATION
With special financing offers from N C
pgs 8 - 11
pg 4
ATTENTION
GOVERNMENTAL ENTITIES
Green Diamond Resource Company,
A Leader in Timber Management
Superior Caterpillar Equipment and Unmatched
Dealer Support Help Make It Happen! pg 3
Look No Further Than The M-Series Motor Grader!
Case Study: Blaine County, Montana Road Department
pg 5
SUMMER 2011
the
days of
summer
The summer’s best RATES on
the industry’s best machines.
Take advantage of interest rates as low as 0% for 36 months on qualifying new Cat machines.
With great deals on Cat machines, now is the time to buy.
savings event
0%
Interest rates as low as
• Skid Steer Loaders
• Multi Terrain Loaders
• Compact Track Loaders
for 36 mo.*
• Compact Wheel Loaders (904-914)
• Mini Hydraulic Excavators (301.8-308)
• Small Wheel Loaders (924-938)
• Small Track-Type Tractors (D3-D5)
• Small Hydraulic Excavators (311-315)
• Backhoe Loaders
Get the best for less! For more information, contact your N C Machinery Sales Representative today!
*Offer good from June 1 to August 31, 2011 on select new models at participating Cat Dealers. Offer is available to customers in the USA and Canada only and cannot be combined with
any other offers. For complete description of terms, conditions, and exclusions, please contact your N C Machinery Sales Representative. Financing and published rate are subject to
credit approval through Cat Financial. Additional terms and conditions may apply. Contact your N C Machinery Sales Representative for details. Subject to change without prior notice.
©2011 Caterpillar. All rights reserved. CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used
herein, are trademarks of Caterpillar and may not be used without permission.
Did
You
Know?
N C (and our fellow member company T&E) have
sold 166 of your consigned units totaling more than
$6,250,000 since January 1, 2010!
THANK YOU to our many satisfied customers who have trusted N C to provide the best
possible equipment disposal solutions!
Learn more about why so many contractors are choosing N C to maximize the return on their
investment at time of disposal! Ask your N C Sales Representative for more details of how
N C can help you:
• Keep your machine in-service while we successfully advertise it locally and around the
world
• Control your sale price
• Avoid all the high fees associated with auction. N C charges a flat 10% commission…
never a dollar more!
browse 85 Consignment Machines
on Pages 8 - 11!
Inside
2-3
total PRODUCT SUPPORT
4
GOVERNMENTAL
5
COMPACT EQUIPMENT/SAFETY/USED PARTS
6
power systems/rental
7
NON-CAT RENTAL ROLL-OUTS
Port Angeles, WA Yakima, WA
360-452-9222
509-248-2371
Juneau, AK
907-789-0181
Monroe, WA
360-805-6000
Seattle, WA
425-251-5800
Wasilla, AK
907-352-3400
Anchorage, AK
907-786-7500
12
13-14
14
POWER SYSTEMS RENTAL ROLL-OUTs and used ag equipment 15
general dealership
Fife, WA
253-896-0878
16
Produced by:
PAID
rental roll-outs
Mt. Vernon, WA
360-424-4292
PRSRT STD
U.S. Postage
used equipment
8-11
Wenatchee, WA
509-886-5561
Fairbanks, AK
907-452-7251
Chehalis, WA
360-748-8845
Permit No. 68
Wichita, KS
consignments
Details on Page 2!
17025 W. Valley Highway
Seattle, WA 98188-5519
CONSTRUCTION FOCUS
Here it Comes! N C Proudly
Introduces the Cat CT660
Vocational Truck
S U M M E R 2 0 11
2 CONSTRUCTION FOCUS
Here to Work
Introducing the Cat CT660 Vocational Truck
®
Among the most significant new products
ever launched by Caterpillar is the Cat®
CT660, the first model in a full line of Class
8 vocational trucks designed to work as
transit mixers, refuse haulers, dump trucks
and in any application requiring a heavyduty truck with the reliability, durability and
low cost of ownership characteristic of Cat
products. Adding even more value to the
CT660 are the resources of N C Machinery
and Tractor & Equipment Co., which
are prepared to sell and service the new
vocational truck line.
“This is an exciting historic milestone for
Caterpillar,” said Steve Gosselin, vice
president of customer services support
division. “The CT660 is a natural expansion
of the Cat product line and a perfect
complement to other Cat equipment on
the jobsite. The CT660 is a direct result of
Caterpillar’s commitment to continuously
develop new products that accelerate the
business success of our customers — and
its design results from hundreds of hours
spent with vocational truck owners, fleet
managers and drivers to determine their
specific needs.”
Superior power-train and chassis
Engine options for the CT660 include
the Cat CT11, CT13 and CT15 (CT15
release is 2012) — with displacements
of 11.1, 12.5 and 15.2 liters — provide
horsepower ratings from 330 to 550 and
peak torque ratings from 1,450 to 1,850
lb-ft. The engines are designed specifically
for vocational applications, yielding
optimum horsepower/torque combinations,
while providing customers the flexibility to
match power and performance to specific
applications and operating conditions.
The engines combine an advanced
exhaust-gas-recirculation system with a
high-pressure common-rail fuel system,
precision intake-air management system
and electronic controls to provide an
optimum blend of high performance, low
emissions and superior fuel economy. The
Compact Graphite engine block, designed
to deliver unprecedented durability,
reduces weight by as much as 500 pounds
compared with conventional all-iron
designs. Reduced engine weight enables
users to increase payloads for added
efficiency and profit.
The combination of dual, sequential
turbochargers and a precise fuel injection
system allows CT Series engines to
develop peak torque at lower speeds, a
characteristic that reduces shifting and
also allows for shifting at significantly
lower speeds. The new engines are
also designed for fast routine service by
providing easy access to components from
the valve cover to filters.
A notable transmission option for the
CT660 is the Cat CX31 automatic, a
reliable, proven performer since 2004 in
global vocational applications. The CX31,
with six forward speeds and one reverse,
is built to complement the torque output of
Cat CT Series engines. The transmission
features heavy-duty clutches and gear
sets that allow full-power shifts, increasing
efficiency and productivity, while reducing
drive train shock loads.
An electronic control module, mounted
directly on the transmission to simplify
wiring and to boost reliability, regulates
shift points based on throttle demand
and vehicle speed. With adaptive shiftcontrol logic, the CX31 can sense driver
operating style to balance fuel economy
and performance, while assuring easy
operation for improved productivity and
safety. Power-take-off options for the CX31
include two side locations and a high-output
rear location, which delivers constant live
power under all operating conditions.
An aluminum lock-up torque converter in
the CX31 allows the CT660 to make quick
starts from a dead stop, even with heavy
loads. The payoff is increased operating
efficiency, resulting from correct speed
and torque combinations for different
applications and reduced fuel consumption.
In addition, the CT660 can be specified
with other transmission options, including
the manual and UltraShift Plus vocational
transmissions built by Eaton.
The CT660 chassis, fabricated of durable,
heat-treated alloy steel, provides the
full strength of a Class 8 heavy-duty
foundation required for accommodating
vocational bodies. Inner rail reinforcements
are available for both the one- or twoframe liner options. The chassis features
a set-back axle and is available in either
116-inch or 122-inch bumper-to-back-ofcab lengths. Both chassis lengths feature
an extra-tight turning radius for enhanced
maneuvering and driving performance.
Exterior features
The CT660 aluminum-alloy cab provides
longer life than conventional steel cabs
and weighs approximately 250 pounds
less. Less weight means larger payloads
and potentially higher profits. In addition,
an aerodynamically sloped hood increases
visibility for the driver and decreases
wind drag to improve fuel efficiency. The
modular hood design allows customers to
replace only damaged sections, resulting
in lower repair costs and less downtime. An
all-metal grille surround also uses modular
design, as does the three-piece, stainless
steel bumper.
Large power mirrors, heated to handle
inclement weather, are cowl mounted for
greater stability and fewer adjustments.
For safety, turn signals may be integrated
into the mirrors. Halogen headlight bulbs
are easy to access, inexpensive to replace,
and are protected with impact resistant
covers.
Among a long list of safety features built
into the CT660 are one- or optional twopiece windshields that are curved and
sloped to offer an uncompromised view
of the road. Generous door openings,
skid-resistant steps, three-point grab irons
and ergonomic non-slip door handles
combine to make the CT660 exceptionally
accommodating to enter and exit.
Interior comfort and convenience
The spacious cab is thoughtfully designed to
help reduce driver fatigue, enhance safety
and increase productivity. Premium interior
features include an air-suspension driver’s
seat, with adjustable lumbar support,
that reclines and adjusts to fit any driver
comfortably. A premium sound insulation
kit, built into the doors, dampens outside
noise and keeps the interior remarkably
quiet. An effective heating/ventilating/
air-conditioning system is designed to
keep the cab interior comfortable in any
climate, using unique round vents that are
positioned for optimum air flow and allow
quick defrosting of windshield and side
windows.
The CT660 dash and center stack feature
easy-to-read gauges that are designed for
easy viewing through the steering wheel,
and the speedometer and tachometer are
combined in one gauge, allowing space
for optional gauges required for specific
vocational applications. The cab-interior
SPECIAL FEATURES
- Infinite number of paint color options
- Aluminum alloy cab
- Aerodynamic sloped hood
- Grille and grille surround
- Durable three-piece bumper
- Tough rubber-composite fender
extensions
- Large power mirrors
- Rugged piano-style door hinges
- Exceptional entry and exit
- Two front tow hooks
- Wraparound windshield
- Halogen headlight bulbs
- Impact-resistant headlight covers
- Optional fog lights
- Flow through sunshade
materials and surfaces, including the
integrated floor mat and one-piece rubber
seat skirt, are designed for easy cleanup
and long life. And drivers will never want for
adequate storage space.
Bruce is eager to hear from you! Please call or
e-mail Bruce today to discuss your Vocational Truck
or Cat on-highway engine support needs.
Industry-Leading Customer Service
- Cab mirrors
- Overhead and under-dash lights
- Map lights
- CB and GPS systems
VOCATIONAL APPLICATIONS
The center stack also houses an
interface for Product Link, a proprietary
Cat telematics system that collects data
from on-board systems and transmits
the information via satellite and cellular
networks to a secure Internet site. The
system allows owners and fleet managers
to remotely track critical information for
more efficient asset management. Product
Link is a standard factory installed feature
with a complimentary three-year service
subscription.
“Our goal was to design and manufacture
the ideal truck—the truck that customers
have always wished they had for specific
vocational applications,” says George
Taylor, director and general manager of the
Caterpillar Global On-Highway Group. “Our
design team paid extremely close attention
to all of the customer input we gathered, and
we focused on turning that information into
practical reality, drawing on Caterpillar’s
proven power train experience with onhighway trucks and decades of cab design
experience for other Cat equipment.”
The result is evident in the exceptionally
capable CT660, reflecting a reliable,
durable, fuel-efficient design that couples
driver comfort and safety with optimum
return on the investment for the owner.
Find out how the new CT660 can go to
work for you.
Proudly Introducing Bruce Casebeer
N C Power Systems and Tractor & Equipment Co.
are pleased to announce Bruce Casebeer as our
Truck General Manager. Bruce will be responsible
for Cat Vocational Truck sales across the N C and
T&E territories as well as the ongoing parts, service,
and technical support of existing Cat on-highway
truck engines. Bruce has spent his career in
Vocational Truck Sales and General Management,
the last 25 of which have been with two Vocational
Truck dealerships in the Seattle area serving
customers throughout the Pacific Northwest.
THE ULTIMATE WORK ENVIRONMENT
- Spacious cab design
- Leather-wrapped steering wheel
- Easy-to-reach compartments
- Back-panel storage
- Premium grade sound insulation
Bruce Casebeer
Truck General Manager
17900 West Valley Hwy.
Tukwila, WA 98188
425-251-6426 Direct
206-730-3767 Cell
[email protected]
[email protected]
Available in truck or day-cab configurations, the CT660 supports a
wide range of body types for these applications and more.
• Aggregates
• Agriculture
• Asphalt
• Civil Construction
• Concrete
• Forestry
• Governmental
• Heavy Haul
• Landscaping
• Lease/Rental
• Manufacturing
• Mining/Quarry
• Oil & Gas
• Paving
• Pipeline
• Public Services
• Recovery
• Road Construction
• Sanitation/Refuse
• Site Construction
• Transportation
• Utility
• Wholesale &
Retail
S U M M E R 2 0 11
CONSTRUCTION FOCUS 3
Green Diamond Resource Company,
A Leader in Timber Management
Superior Caterpillar Equipment and
Unmatched Dealer Support Help Make it Happen!
Fifth-generation, family-owned Green
Diamond Resource Company has deep
roots in the Pacific Northwest. The company
was founded in 1890 by Canadian logger
Sol Simpson, a man far ahead of his time.
He was one of the very first to use horses
instead of oxen for the heavy work in the
woods, and the company has always
taken a long-term, sustainable approach to
forestry.
Today, Green Diamond continues to build
upon this impressive legacy, staying true to
its slogan “Setting the standard in working
forests™.” With its focus on sustainable
forestry,
Green
Diamond
sponsors
and conducts research into habitat
management for plants, fish, and wildlife.
In 2000, Green Diamond earned approval
for a multi-species Habitat Conservation
Plan (HCP) protecting 51 species of fish
and wildlife in its Washington forests. Also
in 2000, Green Diamond began a botany
program in its California woodlands to
survey, monitor, and protect sensitive plant
species.
Green Diamond harvests predominantly
redwood and Douglas-fir. Overall they
own about 800,000 acres, with 320,000
acres in Washington alone. They follow a
logging plan and tend to rotate their activity
eastward in the winter and westward the
rest of the year, harvesting less than 2% of
their lands each year.
The company builds and maintains its own
logging roads. According to Bill Mehl, Road
Construction Supervisor, the company has
over three-thousand miles of logging roads
on its Washington lands. They build or
recondition between 80 and 100 miles per
year, running a 14-man crew, and keeping
their three Cat motor graders in pretty
constant use. They try to work a year-anda-half ahead to allow for the flexibility to
react to market demands. “Their goal,” Bill
said, “is to have everything for next year
roaded this year, plus some extra on top
of that.”
Roy Meier, Maintenance Supervisor, stated
that “Green Diamond relies heavily on Cat
equipment to get it all done. We’re a longtime Cat customer.” For roadwork, they
have a 966C and a 966D, two D8Ks, a
D8N, three 140Hs, and a 345B L. On the
logging side, they have several 330Cs and
Bs. All in, Green Diamond owns nearly 20
pieces of Cat equipment.
While there are many reasons why they
prefer Caterpillar, Cat’s superior guarding
and cab ergonomics are at the top of the
list. They also like the way Cat machines
maintain their quality even after eight to
ten years of what Roy and Bill agree is
“extreme use.”
Cab design is extremely important, since
a comfortable operator has proven in
their operation to be more productive. As
Roy described it, “Cat definitely leads in
this area. They do an extremely good job
in designing a cab you can spend a lot of
time in.”
Their large Cat fleet not withstanding,
when they bought a new Cat 966H in 2008,
they did extensive performance trials with
the Cat and two other brands, bringing
the prospective machines out to one of
their own sites. In the end, they chose
the operator freedom that Cat provided,
as well as the visibility from the cab. Ron
also liked the fact that the Cat had the Oil
Level Checks at ground level. Overall the
consensus was that the Cat 966H was
simply the better machine. Roy remarked,
“The other machines weren’t bad, but a Cat
is a Cat.”
In 2009, Green Diamond’s D8N, bought in
1997, had reached a stage at which it either
needed to be rebuilt or to be replaced. As
with every decision to rebuild or replace a
“The bottom line is
that Cat quality and the
responsive support of
N C Machinery have made
Cat machines a valuable
addition to our business.”
Roy Meier, Maintenance Supervisor
particular machine, their final choice for the
D8 was based on a number of factors. First
and foremost, they knew and trusted the
machine — they had had it a long time and
knew its complete maintenance record.
Likewise, it had had one, conscientious
operator, who was very comfortable
with the machine and its controls. After
examining new and used replacement
options, the final decision was to rebuild.
Once that decision was made, the work
was done at N C Machinery’s Chehalis
branch. It needed to be done quickly, and
the branch got the work completed in 45
days. N C PSSR Greg McClelland was
instrumental in helping develop the best
bang-for-the-buck for the rebuild. The
Green Diamond team worked closely
with Greg to scope the rebuild, focusing
on internal wiring, hoses, engine, drive
train, and final drives, as well as rebuilding
the inside of the cab and replacing the
rails. Bill stated that “Greg was extremely
responsive. We really liked the flexibility of
the rebuild options that Greg provided us.”
N C Service Tech Todd Thompson was
the lead on the rebuild. Even though the
job was on a fast track, Bill and Roy were
pleased that there were no shortcuts taken
during the rebuild process. “Todd and all
the technicians were very professional.”
BONUS DEPRECIATION EXTENDED
FOR 2011 – TAKE ACTION TODAY!
The Tax Relief, Unemployment Insurance Reauthorization and Job Creation Act of 2010 has extended
and increased the first year bonus depreciation and expense deductions for qualified purchases
made in all of 2011.
ACCELERATE BUSINESS
Purchase or Lease new Cat® equipment in 2011 and you may benefit from significant tax advantages
due to the Tax Relief, Unemployment Insurance Reauthorization and Job Creation Act of 2010.
• 100% bonus depreciation for new equipment placed in service in 2011
• If you use the equipment in your trade or business and make purchases in 2011 of no more than
$2,000,000 in new or used equipment, you may qualify for higher first-year expense deductions
up to $500,000 for Section 179 qualified customers
• Regular depreciation on remaining basis
• Rental Purchase Option (RPO) must be exercised within 90 days of initial delivery (only applies
to bonus depreciation)
INCREASE CASH
These incentives will help defer your tax liability and improve affordability and cash flow. The better
you understand the legislation, the more you can better manage your next Caterpillar equipment
purchase or lease.
Regular Depreciation New
Machines Bonus Depreciation Used
Machines
Section 179
$2,000,000 $2,000,000 $2,000,000
First-Year Expenses —
—
$500,000
Bonus Depreciation —
$2,000,000 —
Normal Depreciation* $400,000 —
$300,000
Total First-Year Expenses & Depreciation
$400,000 $2,000,000 $800,000
Equipment Purchases *Assumes 5 year MACRS
To calculate your individual depreciation benefits and find
more information on bonus depreciation and Section 179, visit
www.depreciationbonus.org and www.section179.org
This notification is for informational purposes only and should not be considered tax
or legal advice. Caterpillar, N C Machinery and Tractor & Equipment Co. do not provide
tax advice. Customers should always consult legal counsel, accountant, or tax advisor
before making decisions.
Roy Meier, N C PSSR Greg McClelland, and Bill Mehl stand by the rebuilt D8N.
In the time since the rebuild was completed,
Green Diamond has put over 800 hours
on the D8N, and there have been no
issues with the machine. Bill says, “It has
run trouble free since being rebuilt. The
credit goes to the N C service and parts
departments.”
Bill also is very pleased with N C Sales
Representative Mike Gilbert. “Mike is very
knowledgeable. He’s done an excellent job
of helping spec equipment for us.” When
Green Diamond bought a 430E in 2008,
Mike suggested they buy a 4-way bucket.
Bill said, “That particular recommendation
has come in very handy for us. The people
at N C make sure the machine is spec’d out
to meet our needs.”
Summing up why a leader in its field like
Green Diamond chooses Cat and N C, Roy
said: “We always want to push for value.
We want to be able to make reductions in
field labor and call outs. The bottom line is
that Cat quality and the responsive support
of N C Machinery have made Cat machines
a valuable addition to our business.”
Green Diamond’s D8N was rebuilt at N C
Machinery’s Chehalis branch. Since then it
has logged over 800 trouble-free hours. A
stump splitter is attached to the multi-shank
rippers.
The D8N and the 966H are part of Green
Diamond’s extensive road construction
machine fleet.
“Tier 4” Machine
Emissions Standards
Here are answers to some important,
frequently asked questions:
What are U.S. EPA Tier 4 regulations and how do
they compare to Tier 3?
In 2004 the EPA published the final rule introducing Tier
4 emission standards, which are to be phased-in over
the period of 2008-2015. The Tier 4 standards require
that emissions of particulate matter (PM) and oxides of
nitrogen (NOx) be further reduced by about 90%. Tier
4 emissions levels are similar to those required by the
2007-2010 standards for on-highway engines.
When do the new regulations begin to apply?
Tier 4 Interim emissions regulations will be phased
in by engine power category, followed by Tier 4 Final
standards. The Tier 4 engine power categories are
expressed in kilowatts (kW). Tier 4 began in 2008 for
all engines under (<) 19 kW, and for those greater than
or equal to 19 but less than 56 kW (19 ≤ kW < 56). For
engines in the 130 ≤ kW ≤ 560 category, and those in
the category for above 560 kW, Tier 4 Interim applies
in 2011. Finally, for the 56 to 130 kW (56 ≤ kW < 130)
category, Tier 4 Interim applies in 2012. Tier 4 Final
standards generally are applicable three years after
the Tier 4 Interim start date.
Do Tier 4 regulations only impact the U.S.?
Similar regulations will impact the European Union and
likely Canada and Japan. In the EU the regulations are
called Stage IIIB/IV; in Japan they are called Step 4.
Neither Japan nor Canada have completed adoption
of Tier 4/Step 4, but we expect them to do so in the
near future. In the EU the regulations do not apply
to engines < 19kw or engines >560kW at this time
and we expect Japan to be the same as the EU. The
regulation in Canada is expected to be essentially
identical to the U.S. regulation.
Final regulations require additional reductions in NOx.
Alternative phase-in periods from Interim to Final are
intended to provide time to transfer technology from
highway engines to non-road engines.
What is Tier 4 Interim vs. Tier 4 Final?
Tier 4 Interim regulations began in 2011 for most power
categories and Tier 4 Final is phased in beginning in
2014. Tier 4 Interim is intended to enable a gradual
phase in to final regulations for manufacturers. Tier 4
What fuel restrictions will products have?
Tier 4 Interim products require Ultra Low Sulfur Diesel
(ULSD) fuel containing a maximum of 15 ppm sulfur
as opposed to LSD (Low Sulfur Diesel) which contains
500 ppm sulfur maximum.
Industry-Leading Customer Service
S U M M E R 2 0 11
4 TOTAL PRODUCT SUPPORT
Get Your
Machine Ready
for Business
1. 0% Interest For 6 Months/No Payments
or
2. 0% Interest For 12 Months/12 Equal Payments
or
3. 2.5% Interest For 24 Months/24 Equal Payments
On Machine Major Component Rebuilds and/or Undercarriage Replacement when you use your
Cat® AccessAccount*
Take advantage of this special financing offer on machine major component rebuilds and/or undercarriage as well as Cat Certified and Certified Powertrain Rebuilds.
Contact your N C Machinery or Tractor & Equipment Co. PSSR for more details!
*On approved credit and/or appropriate approval of Cat® AccessAccount. Repairs must be performed at an N C Machinery or Tractor & Equipment Co.
location. Repairs must be started by September 30, 2011. Certain rebuild minimums are required to qualify for the program. Cannot be combined with
any other offers. Offer applies to machinery only (not commercial, marine, industrial, or truck engines, etc.). Certain restrictions apply; contact your N C
Machinery or Tractor & Equipment Co. PSSR for more details.
Your Ag Parts Headquarters!
Special Offer!
Ask your local branch how to
avoid any freight charges for
your AGCO parts!
Would you like a 10-to-1
return on your investment?
AGCO Parts
Books can be
viewed online at
agcopartsbooks.com
We carry parts from many vendors, including:
S•O•SSM Services will save you money!
Studies have shown that for each dollar spent on S•O•SSM Oil and Coolant
Analysis for your equipment, you save an average of ten dollars on repairs.
And now you can go online to sign up for your results.
Why Use SOS Services:
• Avoid complete failures
• Track what is going on inside your equipment
• Maintain and reduce troubleshooting time
• Optimize oil change intervals
• Manage component life and equipment availability
Contact your N C Machinery or Tractor & Equipment Co. PSSR to begin
investing today.
Industry-Leading Customer Service
S U M M E R 2 0 11
GOVERNMENTAL 5
Attention Governmental Entities
Looking for the Best Value for Your Constituents? Look No Further than the M-Series Motor Grader!
Case Study:
Blaine County, Montana
Road Department
Blaine County lies east of Havre in the
Northern Great Plains. In the winter,
temperatures usually average near 0°F,
but severe winter temperatures of -25°F to
-35°F are not uncommon. In this part of the
state, winter winds create deep snowdrifts.
According to Tom Fairbank, Blaine County
Road Superintendent, the winter of 20102011 was the worst since 1978, with snow
lasting a month-and-a-half longer than
average. In the northeastern parts of the
county, snow was estimated to be 300 to
400% above normal.
Given the unusually severe winter, Tom
was especially glad to have a fleet of (6)
Cat® 160M motor graders on their side.
Tom reports the County is very pleased
with their new M-Series graders for the
following reasons:
• Operator Comfort. The Blaine County
road crews have found the M-series
cabs to be much more comfortable to
operate than previous motor graders.
The machines feature suspension
seats with adjustable lumbar support,
ergonomically-placed controls, and easy
to read in-dash gauges and warning
lights. Tom remarked, “Comfortable cabs
allow the operators to work longer without
fatigue. It has been very important this
year as crews were working 10-12 hour
days, plus weekends in the northeastern
part of the county due to the heavy snow.“
• Joystick Controls. These controls
were very quick and easy to learn and
significantly reduce wrist motion adding
to the operators’ comfort. “My guys were
able to get right to work with them. With
snow removal already in full swing, there
wasn’t time for a long learning curve,”
said Tom. “As well, with the joystick
controls, my operators can now work
sitting down, instead of having to stand
in sometimes awkward positions for long
stretches at a time.” Tom Fairbank knows
that significantly increased operator
comfort contributes to safer working
“There is simply no comparison. They’re safer, more
comfortable, and they create a better-finished surface.
They are really easy to operate and the best graders
we’ve ever had for snowplowing.”
Tom Fairbank, Blaine County Road Superintendent
conditions, and no other motor grader
can compare to the Cat M-Series in terms
of ergonomics.
• Weight and Horsepower. The extra
weight and power of the M-Series have
meant that his crews hardly had to chain
up at all, even under conditions where
an inferior machine would have had to
be chained up. Additionally, the added
weight means the final finished grade is
better.
• Increased Visibility. The 160M’s raised
cab, one-piece front window, large side
windows, and wide, sloped rear window,
offer clear views all around the machines.
“My operators appreciate the visibility
improvements.”
• Safety. Another M-series feature that
his crews like is the Operator Presence
System. This feature keeps the
parking brake engaged and hydraulic
implements disabled until the operator
is sitting down and ready to work.
• Dealer Support. The support Blaine
County receives from T&E, the local
Cat dealer, is very good. According to
Tom, “If they don’t have the parts we
need on hand, they have them to us
overnight. If we need a tech they’re
usually here the same day.”
Asked to sum up his impressions of his
new M-Series motor graders compared
to previous graders, Tom said, “There
is simply no comparison. They’re safer,
more comfortable, and they create a
better-finished surface. They are really
easy to operate and the best graders
we’ve ever had for snowplowing.”
Tired of The Bid Process?
Do You Know Your Alternatives?
N C Machinery and Tractor &
Equipment Co. have successfully bid
contracts in Alaska, Montana, North
Dakota, Washington, and Wyoming
which may allow for cooperative
(“Piggyback”) purchasing. This takes
much of the work and frustration out of
the bid process and also takes the risk
out of receiving the wrong machine and
support network to meet your needs.
In the end, we can help you deliver the
best value to your constituents.
• Avoid the time-consuming process of
putting bids together
• Avoid time spent waiting for responses
• Avoid the unpredictability of a low-bid
scenario
• Receive greater value from your
equipment through lower maintenance
costs, higher productivity, and greater
uptime
• Receive industry-leading post-sale
support from N C Machinery and
Tractor & Equipment Co.
We can provide cooperative (“Piggyback”) purchasing options for many
products in many of the states we
serve, including Backhoe Loaders,
Wheel Loaders, and Motor Graders.
We also proudly support the NJPA
(National Joint Powers Alliance)
Consortium Contract #100907, which
allows for the purchase of over 100
different Caterpillar models through
a nationally leveraged contract,
regardless of the size of your operation.
Learn why thousands of governmental
and non-profit agencies currently
participate in this nationally recognized,
member-owned cooperative at:
http://govbidspec.cat.com/NJPA.
Want to Learn More?
Please contact Allen Evans, Governmental Sales
Manager for N C and T&E.
425-251-5873 Direct • 206-423-7419 Cell
[email protected]
[email protected]
Industry-Leading Customer Service
S U M M E R 2 0 11
6 COMPACT EQUIPMENT/SAFETY/USED PARTS
Equipment for any budget specials
T&E
Spotlight on 257B Multi
Terrain Loaders
Spotlight on
302.5C Mini Excavators
Spotlight on
305C CR Mini Excavators
Spotlight on
416 Backhoe Loaders
Cat® 257B2 Multi
Terrain Loader
Cat® 302.5C
Mini Excavator
Cat® 305C CR
Mini Excavator
Cat® 416E
Backhoe Loader
•Cab
• Canopy
• Canopy
• Canopy
• Air Conditioner
• Rubber Track
• Rubber Track
• E-Stick
• Hydraulic Quick Coupler
• Standard Stick
• Straight Blade
• GP Hydraulics
• Self Leveling
• 18” Bucket
• Long Stick
• 4 Wheel Drive
• 72” Bucket
• Operating Weight 6,283 lbs.
• Quick Coupler
• Standard Shift
• Operating Capacity 2,500 lbs.
• New unit comes with
standard Cat warranty
• Bucket
• 1.25 cyd Front Loader Bucket
• Thumb
• 24” Backhoe Bucket
• Operating Weight 11,729 lbs.
• Operating Weight 14,960 lbs.
• New unit comes with
standard Cat warranty
• New unit comes with
standard Cat warranty
• New unit comes with
standard Cat warranty
Buy New 257B2 for
Buy New 302.5C for
$42,250
Buy New 305C CR for
$30,700
Buy New 416E for
$52,200
$58,850
one Unit Only
one Unit Only
one Unit Only
one Unit Only
FOB Anchorage, AK
FOB Fife, WA
FOB Port Angeles, WA
FOB Seattle, WA
s/n SLK08631
ID # 27W64400
s/n GBB03838
ID # 28A17055
OR
OR
Buy the following
well-maintained rental fleet unit!
Serial # ID # Year Model Location s/n HWJ03284
ID # 28W64823
OR
Buy the following
well-maintained rental fleet units!
Sale
Price
0SLK05255 10W68164 2006 257B Seattle, WA $33,250
Serial # ID # Year Model Location s/n SHA05519
ID # 28W64887
OR
Buy the following
well-maintained rental fleet unit!
Sale
Price
0GBB00325 25W52529 2005 302.5C CN Worland, WY $24,600
Serial # ID # Year Model Location Buy the following
well-maintained rental fleet unit!
Sale
Price
0HWJ01231 29W67745 2006 305C CRCN Seattle, WA $29,500
Serial # ID # Year Model Location Sale
Price
0BFP14145 24W46490 2004 416D 4ECN Fife, WA $51,400
0GBB00327 25W52531 2005 302.5C CN Monroe, WA $25,000
0GBB00324 25W52528 2005 302.5C CN Monroe, WA $27,800
0GBB01975 26W59626 2006 302.5C CN Fairbanks, AK $30,200
On approved credit. Offer expires October 31, 2011. Offer valid in N C and T&E territories only. All equipment subject to price change and/or prior sale. All rental fleet units FOB nearest N C Machinery
or T&E location. All used equipment is sold as-is/where-is. Prices listed apply to outright purchase only. Any operating weights or capacities published are approximate and vary depending on
configuration. Units pictured are stock photos and not of the actual equipment offered. Certain restrictions apply; contact your N C or T&E sales representative for details.
Quality Used and Rebuilt
Cat Parts and Components
Safety
ALWAYS
THE RIGHT
CHOICE
Yakima:
Bob Benedict
800-234-5564
At N C Machinery and Tractor & Equipment Co., the safety of our employees
and others is top priority. We are constantly reviewing best safety practices
with our employees and have developed a safety culture that is in-line with our
motto: “Safety. Always the Right Choice.”
Caterpillar has developed an extensive variety of “Toolbox Talks” such as the
one below that you can use within your organization free of charge. If you would
like dozens of other preprinted topics similar to the one below to review with
your employees, simply ask your N C Machinery or Tractor & Equipment Co.
PSSR … or visit SAFETY.CAT.COM today.
Anchorage:
Paul Blakney
800-478-7000
Billings:
Pat Gallagher
800-332-7095
Seattle
N C Power Systems:
Jeff Mills
800-562-4735
621F Cab - $9,500
938G Engine, Low Hour $8,500
627F Front Engine
Reconditioned - $18,500
D10N/R Ripper Beams Rebuilt
- $16,500
988B Cab D10N Cab D9N Cab
$9,000
$9,000
$6,000
C6.6 Engine, 175Hp
Arrangement # 3070431, New
Cat Surplus - $7,995
By Robert “Bobby” Bond,
N C Machinery and T&E
Safety Director
How To Make Safer Work Zones
Damage or injuries often occur on the jobsite when a worker enters a
work zone without informing fellow employees in the area.
Create Recognizable Boundaries
– Help workers recognize patterns in operating systems for all onsite heavy
equipment.
– Clearly define the boundaries of all work zones, paying special attention to areas where the work zones
intersect and overlap.
Communication Training
Train employees on the importance of jobsite communication, such as:
– Keeping track of others in the work zone and letting them know where you are at all times.
– Establishing eye contact with co-workers before entering their work zone.
– Making sure there is two-way communication whenever it is necessary to enter a work zone.
–Never entering another person’s work zone until the employee active in that zone acknowledges your presence.
– Always informing coworkers when you leave their work zones.
The material in this document is provided for informational purposes only and not as a comprehensive or exhaustive resource on this topic.
This material has been compiled from a multitude of sources believed to be accurate; however, Caterpillar Inc., N C Machinery, or Tractor &
Equipment Co. assumes no responsibility for the accuracy or currency of this information and encourages you to consult experts in this area
for more information. In no event does the content of this document supersede any applicable local, state, or federal statutes or regulations.
Industry-Leading Customer Service
Seattle
N C Machinery:
Dan Hughes
800-562-4735
3516 B Crankshaft Part Number
1286788, Polished and Magged
Standard-Standard Journals $19,995
CG25 Olympian Natural Gas
Generator Set, 25 kW with Low
Hours - $4,995
D379 Long Block Rebuilt with
Cat Components - $38,500
We are currently tearing down a 988G and a 621F.
Call for details!
3516 B Crankshaft Part Number
1286788-025, Fresh Ground
0.025”-0.025” Journals - $15,950
SR4 Cat Generator End
Arrangement Number 2541292,
New Cat Surplus, fits C9 or
3306B, 250kW - $11,700
On approved credit. Limited to stock on hand and subject to price change and/or prior sale. All items FOB current
N C or T&E location. Certain restrictions apply. Offers expire 10/31/11.
S U M M E R 2 0 11
POWER SYSTEMS/RENTAl 7
KEEP MOVING
with Truck Engine
Summer Savings
LIMITED TIME OFFER
Free Financing for up to 24 months when
you use your Cat® AccessAccount* AND
Free 3 year Extended Service Coverage
For a limited time, take advantage of 0% financing and free Extended
Service Coverage when you purchase a truck engine overhaul.
Contact your N C or T&E Truck Engine PSSR today for more details
as well as other 0% financing offers through Cat AccessAccount.
*Offer valid June 1-August 31, 2011. Subject to credit approval. Cannot be combined with other
offers. Certain restrictions apply; contact your N C or T&E Truck Engine PSSR for details.
©2011 Caterpillar. All rights reserved. CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress
as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
rental
The Cat Rental Store Business Tip:
Renting Delivers More
When you rent from N C The Cat Rental
Store and T&E The Cat Rental Store,
you’re not just getting temporary use of
a product, you’re getting a solution that
saves you time, money and much more.
Rental boosts your bottom line.
Here’s how:
•Maximize Uptime. The Cat Rental
Store employs trained technicians
who maintain a rental fleet in likenew condition to ensure that renters
receive the most productive, reliable
machines.
•Maximize Efficiency. You can
expect the latest technology from
the Cat Rental Store, whether it’s
Caterpillar® or other quality brands
of equipment, for top productivity.
Renting from us allows you to use the
latest technology equipment without
the concern of costly depreciation.
•Minimal
Maintenance.
With
equipment rental, you can eliminate
costly service shops, service tooling,
spare parts and maintenance
records. It’s all taken care of as part
of your rental agreement.
•Eliminate Storage. There’s no need
to maintain a storage yard. Just give
us a call for quick pick-up, or drop
off the equipment at our nearest Cat
Rental Store location when you’re
done.
•Free Up Capital. Renting frees up
business capital for other expenses
and investments. Since an expense is
only incurred for the equipment when
it’s needed for a job, the extra capital
associated with equipment ownership
can be allocated elsewhere to help
your company grow profitably.
•Supplement Your Fleet. Your job
requirements may change with your
customers’ demands and though you
may not have the right equipment on
hand – we do! You can rely on The
Cat Rental Store to quickly supply the
right tools for the task.
•Road Test Equipment. You may
be considering a purchase in the
near future and want to try out the
equipment in jobsite conditions.
Renting a similar model from us can
help you make the choice that
will best suit your business.
Stop by your local N C The
Cat Rental Store or T&E The
Cat Rental Store today. Our
knowledgeable staff can show you
how renting can deliver more to you.
T&E
Industry-Leading Customer Service
S U M M E R 2 0 11
8 used equipment
Consignments
Ag Tractors
Backhoe Loaders
1996 CATERPILLAR 85C
1997 CATERPILLAR 416C
1998 CATERPILLAR 416C
2004 Caterpillar 420D
$70,000
$27,800
$27,800
$35,000
Catalog #: CU1300134, Serial #: 9TK01989,
SMU/Hrs: 6355
Catalog #: CU1390436, Serial #: 4ZN08009,
SMU/Hrs: 7645
Catalog #: CU1390435, Serial #: 4ZN08015,
SMU/Hrs: 7248
Catalog # CU1514874, Serial #FDP20705,
SMU/Hrs: 1426
EXCAVATORS
2004 CATERPILLAR 420D
2004 CATERPILLAR 420E IT
2005 CATERPILLAR 305 CR
1995 KOMATSU
PC50-UU2E
$36,500
$72,500
$44,500
$12,800
Catalog #: CU1523275, Serial #: BLN11894,
SMU/Hrs: 2548
Catalog #: CU1454582, Serial #: KMW00710,
SMU/Hrs: 1592
Catalog #: CU1402516, Serial #: DGT00884,
SMU/Hrs: 1050
Catalog #: CU1381683, Serial #: 15629,
SMU/Hrs: 6046
2006 CATERPILLAR 311 CU
2005 HYUNDAI R140
2004 CATERPILLAR 312C L
2004 CATERPILLAR 312C L
$85,000
$78,000
$65,000
$95,000
Catalog #: CU1489024, Serial #: CKE01761,
SMU/Hrs: 3126
Catalog #: CU1501240, Serial #: N40612159,
SMU/Hrs: 675
Catalog #: CU1500109, Serial #: CBA02051,
SMU/Hrs: 5063
Catalog #: CU1416278, Serial #: CBA03481,
SMU/Hrs: 2931
2007 CATERPILLAR 315C L
2007 CATERPILLAR 315C L
2005 CATERPILLAR 320C L
1991 YANMAR 55-1
$110,000
$135,000
$140,000
$11,500
Catalog #: CU1270801, Serial #: CJC04610,
SMU/Hrs: 2195
Catalog #: CU1489021, Serial #: CJC05134,
SMU/Hrs: 2729
Catalog #: CU1392324, Serial #: PAB06505,
SMU/Hrs: 890
Catalog #: CU1514873, Serial #: 107805,
SMU/Hrs: 4697
1992 HITACHI EX700H
1999 JOHN DEERE 120C
2006 CATERPILLAR 320C L
2003 CATERPILLAR 322C L
$70,590
$24,750
$112,000
$92,500
Catalog #: CU1381685, Serial #: 1721669,
SMU/Hrs: 13450
Catalog #: CU1485637, Serial #: 120X031121,
SMU/Hrs: 8461
Industry-Leading Customer Service
Catalog #: CU1475905, Serial #: EAG00431,
SMU/Hrs: 2650
Catalog #: CU1466125, Serial #: HEK00161,
SMU/Hrs: 3930
On approved credit. All equipment subject to price change and/or prior sale. All units FOB N C or T&E location nearest to machine.
Estimated hours subject to change. Offers expire 10/31/11.
S U M M E R 2 0 11
used equipment 9
Consignments
EXCAVATORS cont.
1995 JOHN DEERE 590D
1996 CATERPILLAR 325B L
1999 CATERPILLAR 330C L
2006 KOBELCO/
KOBE STEEL LTD SK160
$27,500
$89,000
$175,000
$65,000
Catalog #: CU1428766, Serial #: FF590DX002783,
SMU/Hrs: 13257
Catalog #: CU1403302, Serial #: 2JR01922
Catalog #: CU1388647, Serial #: CAP00834,
SMU/Hrs: 3490
Catalog #: CU1283751, Serial #: YM03-U0858
2000 JOHN DEERE 160LC
2000 HITACHI EX220
2003 JOHN DEERE 200C LC
2006 CATERPILLAR 385C L
$55,000
$55,000
$110,000
$600,000
Catalog #: CU1401583, Serial #: P00160X041463
Catalog #: CU1293940, Serial #: 15SP002129,
SMU/Hrs: 9710
Catalog #: CU1370707, Serial #: FF200CX504274,
SMU/Hrs: 3365
Catalog #: CU1381682, Serial #: EDA00277,
SMU/Hrs: 3256
1992 HITACHI EX200-2
1993 HITACHI EX200LC-2
1995 JOHN DEERE 590D
1997 KOMATSU PC220-6
$33,500
$25,000
$27,500
$39,700
Catalog #: CU1398135, Serial #: 14765030,
SMU/Hrs: 9012
Catalog #: CU1398142, Serial #: 14770473,
SMU/Hrs: 9078
Catalog #: CU1428766, Serial #: FF590DX002783,
SMU/Hrs: 13257
SCRAPER
Catalog #: CU1390382, Serial #: 52008, SMU/Hrs: 10652
FORESTRY
1993 CASE 9030
1986 LINK-BELT CONST. LS4300
1981 CATERPILLAR 613B
1996 TIMBERJACK INC. 2618FB
$24,700
$20,000
$30,000
$33,000
Catalog #: CU1298505, Serial #: DAC030062,
SMU/Hrs: 8016
Catalog #: CU1398567, Serial #: A8H6587TL
Catalog #: CU1395341, Serial #: 38W06955,
SMU/Hrs: 8841
Catalog #: CU1281990, Serial #: CE9781, SMU/Hrs: 1851,
Catalog #: CU1401138, Serial #: 719C218
WATER EQUIPMENT
LIFT EQUIPMENT
MULTI TERRAIN LOADERS
2001 JLG 400S
2002 GENIE GS2668RT
1979 DJB D330
2006 CATERPILLAR 257B
$16,950
$10,500
$55,600
$27,500
Catalog #: CU1501239, Serial #: 138270-0300055226,
SMU/Hrs: 3956
Catalog #: CU1401132, Serial #: 11188, SMU/Hrs: 3224
Catalog #: CU1283758, Serial #: 33DSB-3740
On approved credit. All equipment subject to price change and/or prior sale. All units FOB N C or T&E location nearest to machine.
Estimated hours subject to change. Offers expire 10/31/11.
Catalog #: CU1500835, Serial #: SLK05063,
SMU/Hrs: 2000
Industry-Leading Customer Service
S U M M E R 2 0 11
10 used equipment
Consignments
MULTI TERRAIN LOADERS cont.
TRAILERS
2005 CATERPILLAR 277B
2006 CATERPILLAR 277B
2005 CATERPILLAR 287B
2006 SMITHCO S4-4836
$30,000
$45,750
$25,000
$52,500
Catalog #: CU1403307, Serial #: MDH02810,
SMU/Hrs: 5677
Catalog #: CU1524784, Serial #: MDH04218,
SMU/Hrs: 698
Catalog #: CU1486144, Serial #: ZSA02643,
SMU/Hrs: 2492
Catalog #: CU1410903, Serial #: 1S9SS48467L476383
TRUCKS
1993 TRAILKING TK100HDG
2006 SMITHCO SIDEDUMP
2003 FREIGHTLINER FLD120SD
DUMP TRUCK
1998 KENWORTH
T800 DUMP TRUCK
$29,500
$31,500
$69,500
$58,500
Catalog #: CU1523276, Serial #: 1TKJ05030NM109871
Catalog #: CU1405653, Serial #: 1S9SS42217L476461
Catalog #: CU1401136, Serial #: 1FBHALCG73LK33729,
SMU/Hrs: 333690
Catalog #: CU1457415, Serial #: 747076
ROLLERS
1978 KENWORTH W900
1971 FORD 8000
WATER TRUCKS
2008 CATERPILLAR CB24 VIBRATORY
DOUBLE DRUM ASPHALT
1989 SAKAI AMERICA SV70D
VIBRATORY SINGLE DRUM SMOOTH
$16,000
$12,000
$31,250
$25,000
Catalog #: CU1398144, Serial #: W900,
SMU/Hrs: 463573
Catalog #: CU1401130, Serial #: Y8044VJ40101
TELEHANDLER
Catalog #: CU1439690, Serial #: 24000284,
SMU/Hrs: 118
Grinders
Catalog #: CU1390380, Serial #: 30122, SMU/Hrs: 4768
MOTOR GRADERS
2001 CATERPILLAR CS-563DAW
VIBRATORY SINGLE DRUM SMOOTH
2005 CATERPILLAR TH330B
2008 MORBARK 2600
1979 CATERPILLAR 140G
$50,000
$51,000
$191,500
$56,000
Catalog #: CU1396971, Serial #: 9MW01046,
SMU/Hrs: 5604
Catalog #: CU1518369, Serial #: SLB00814,
SMU/Hrs: 1451
Catalog #: CU1535291, Serial #: 187-1062, SMU/Hrs: 162
Catalog #: CU1500120, Serial #: 72V03629,
SMU/Hrs: 14645
TRACK-TYPE TRACTORS
1974 CATERPILLAR 16G
1995 CATERPILLAR D3C III
1977 JOHN DEERE 550
2003 CATERPILLAR D3G XL
$81,000
$26,000
$14,500
$44,500
Catalog #: CU1434956, Serial #: 93U00634, SMU/
Hrs: 6153est
Catalog #: CU1384381, Serial #: 6SL01285,
SMU/Hrs: 4018
Industry-Leading Customer Service
Catalog #: CU1398134, Serial #: 2714571, SMU/Hrs: 5004
Catalog #: CU1517256, Serial #: JMH01922,
SMU/Hrs: 2351
On approved credit. All equipment subject to price change and/or prior sale. All units FOB N C or T&E location nearest to machine.
Estimated hours subject to change. Offers expire 10/31/11.
S U M M E R 2 0 11
used equipment 11
Consignments
TRACK-TYPE TRACTORS cont.
1994 DRESSER TD8H
1994 CATERPILLAR D3C II
1995 CATERPILLAR
D3C IIIL GP
2007 CATERPILLAR D3G XL
2005 CATERPILLAR D4G XL
$28,950
$20,000
$20,000
$62,500
$65,000
Catalog #: CU1409254, Serial #: JMH02453,
SMU/Hrs: 638
Catalog #: CU1416279, Serial #: HYD00983,
SMU/Hrs: 2936
Catalog #: CU1514875, Serial #:
4710001P035698, SMU/Hrs: 5280
Catalog #: CU1498472, Serial #: 4HJ00897,
SMU/Hrs: 4686
Catalog #: CU1490007, Serial #: 7XL00332
2004 CATERPILLAR
D5M LGP
2007 CATERPILLAR D5G XL
2004 CATERPILLAR
D5G LGP
2008 CATERPILLAR D5K XL
1989 CATERPILLAR
D7H LGP
$27,000
$59,500
$89,000
$114,000
$113,600
Catalog #: CU1387676, Serial #: WGB01418,
SMU/Hrs: 2208
Catalog #: CU1490008, Serial #: RKG01137,
SMU/Hrs: 2905
Catalog #: CU1261290, Serial #: WWW00703,
SMU/Hrs: 167
Catalog #: CU1391107, Serial #: 4FG00358,
SMU/Hrs: 12906
2005 JOHN DEERE
700H XLT
2005 CATERPILLAR D5N XL
2007 CATERPILLAR
D5K LGP
2008 CATERPILLAR D6T XL
2008 JOHN DEERE 450J
$75,000
$110,000
$124,500
$305,525
$50,000
Catalog #: CU1293947, Serial #: T0700HX9395,
SMU/Hrs: 3681
Catalog #: CU1405735, Serial #: AGG01673,
SMU/Hrs: 871
Catalog #: CU1387675, Serial #: 3CR00411,
SMU/Hrs: 8747
Catalog #: CU1490009, Serial #: YYY00242,
SMU/Hrs: 824
Catalog #: CU1517520, Serial #: LAY00904,
SMU/Hrs: 1182
Catalog #: CU1417848, Serial #: 141081,
SMU/Hrs: 2479
WHEEL LOADERS
2007 CATERPILLAR
D6K LGP
1977 CATERPILLAR D8K
2004 CATERPILLAR D8RII
1981 CATERPILLAR D8K
2005 CATERPILLAR 930G
$149,500
$60,500
$377,800
$56,000
$90,000
Catalog #: CU1530212, Serial #: DHA00277,
SMU/Hrs: 1278
Catalog #: CU1407629, Serial #: 77V07939
Catalog #: CU1401139, Serial #: 6YZ01881,
SMU/Hrs: 2300
Catalog #: CU1400253, Serial #: 77V18094
2007 CATERPILLAR 962H
1981 CATERPILLAR 966D
1976 CATERPILLAR 966C
1999 CATERPILLAR 966G
2004 HYUNDAI HL740-7
$225,000
$73,500
$40,000
$122,500
$37,950
Catalog #: CU1519582, Serial #: K6K00291,
SMU/Hrs: 2270
Catalog #: CU1390437, Serial #: 99Y01175,
SMU/Hrs: 5400est
Catalog #: CU1416268, Serial #: 76J10056
On approved credit. All equipment subject to price change and/or prior sale. All units FOB N C or T&E location nearest to machine.
Estimated hours subject to change. Offers expire 10/31/11.
Catalog #: CU1446195, Serial #: 9RS00671,
SMU/Hrs: 18578
Catalog #: CU1495888, Serial #: TWR00700,
SMU/Hrs: 5725
Catalog #: CU1518617, Serial #: 110252,
SMU/Hrs: 8180
Industry-Leading Customer Service
S U M M E R 2 0 11
12 used equipment
used equipment
2009 CATERPILLAR 420E ST BACKHOE LOADER
Catalog #: CU1484379, Serial #: PRA00987, SMU/Hrs:
120, E-Stick, Deluxe Cab w/AC, Engine Coolant Heater,
120V Battery, HD Hydraulics 6 Function, Ride Control,
1075 LB Counterweight. Seattle, WA.
$99,000
2005 CATERPILLAR 160H NA MOTOR GRADER
Catalog #: CU1438538, Serial #: ASD00539, SMU/
Hrs: 7241, Front Pushblock, Ripper, Blade Lift
Accumulators, Hydraulic Base & 1 Function, TurbineType Precleaner. Billings, MT.
$190,000
2006 CATERPILLAR 325C CR TRACK EXCAVATOR
Catalog #: CU830326, Serial #: BKW00386, SMU/Hrs:
3491, Wedge Style Coupler and Thumb, Engine S/N
5GG10204, 10’6” Stick, NC Combination Hydraulics,
Thumb. Seattle, WA.
$142,000
2005 CATERPILLAR 385B L TRACK EXCAVATOR
Catalog #: CU1457418, Serial #: RCD00253, SMU/
Hrs: 3386, 27’7” Boom, 14’5” Stick, Track Guiding
Guard, Counterweight Removal Device, 41.5” Double
Grouser Track Pads, Air Conditioner, Vandalism Guard,
Hydraulic Pin Grabber Quick Coupler. Seattle, WA.
$497,000
2004 CATERPILLAR 963C TRACK LOADER
Catalog #: CU1205322, Serial #: BBD00490, SMU/Hrs:
3588, Enclosed ROPS w/Air Conditioner, GP Bucket,
Ripper, Waste Management, 17.7” DG Trap Track, 5.5
CYD Landfill Demolition Bucket, 3 Teeth Ripper.
Billings, MT.
$117,000
2003 CATERPILLAR 962GII WHEEL LOADER
Catalog #: CU1426336, Serial #: AXY00253, SMU/
Hrs: 10798, Engine S/N 5GG02296, Air Suspension
Seat, Ride Control, Air Condition, Powertrain Guard,
Econology Axle Drain, Engine Coolant Heater, Hyd
Horiz Pin Quick Coupler, Pallet Forks, 4.25 CYD GP
Bucket w/Bolt-on Cutting Edge, 23.5 R25 Tires, Auto
Lube System. Seattle, WA.
$119,000
2003 CASE 921 WHEEL LOADER
Catalog #: CU1453671, Serial #: PRA00846, SMU/Hrs:
493, GP Hydraulic Loader, Engine Coolant Heater, Heavy
Duty Battery, -58F Antifreeze, 1.4 CYD GP Bucket,
2-Piece Cutting Edge, 4WD Bias Firestone Tires, One
Way E-Stick, Quick Coupler Pin Grabber, Deluxe Cab w/
AC, Ride Control, Powertrain 93HP, 4WD Standard Shift.
Williston, ND.
$78,500
2008 JOHN DEERE 870D MOTOR GRADER
Catalog #: CU1474657, Serial #: 619239, SMU/Hrs: 3766,
Enclosed Low Profile Cab w/AC, Side Shift Tip Control,
Rear Ripper, Diff Lock/Unlock, Blade Accumulators.
Billings, MT.
$195,000
1995 CATERPILLAR 330L TRACK EXCAVATOR
Catalog #: CU689845, Serial #: 5YM01159, SMU/Hrs:
14072, 12’10” Stick, Heavy Duty Bottom Guard, Track
Guiding Guard. Seattle, WA.
$39,900
2006 CATERPILLAR 385C L TRACK EXCAVATOR
Catalog #: CU1389917, Serial #: EDA00296, SMU/Hrs:
3670, 14’5” HB Stick, Oil, Change System, 32’10” Reach
Boom, 30” Double Grouser Track. Billings, MT.
$600,000
1969 CATERPILLAR D4D TRACK TYPE TRACTOR
Catalog #: CU1429126, Serial #: 83J00922, Open ROPS
w/Sweeps, Straight Dozer Glade, Drawbar, Lever Steer,
Auxiliary Hydraulics. Williston, ND.
$16,500
1996 CATERPILLAR 980G WHEEL LOADER
Catalog #: CU1522311, Serial #: 2KR00573, 3406 Engine
SN:41Z01873, Air Conditioner, Sliding Window, AutoShift Transmission, Ride Control, 7.0 CYD GP Bucket w/
Bolt-on Cutting Edge, 29.5 R25 Tires. Seattle, WA.
$84,500
2005 CATERPILLAR 980H WHEEL LOADER
Catalog #: CU1356062, Serial #: JEE0155192, SMU/Hrs:
7671, Auto Shift Transmission, Ride Control, Cummins
QSM Diesel Engine, 26.5-25 Tires, GP Bucket with
Bolt-on Edges, Enclosed ROPS Cab w/AC.
Seattle, WA.
SOLD!
Industry-Leading Customer Service
2009 CATERPILLAR 420E ST BACKHOE LOADER
Catalog #: CU1444292, Serial #: JMS00588, SMU/Hrs:
10875, Enclosed Cab w/Air Conditioner, Ride Control,
Command Steer, Auto Shift, CB Radio Ready, Fast Fill
Fuel System, 7.0 CYD GP Bucket, 29.5 R25 XHA MX L3
Tires. Billings, MT.
$210,000
On approved credit. All equipment subject to price change and/or prior sale. All units FOB location listed. Estimated hours subject to change.
Offers expire 10/31/11.
S U M M E R 2 0 11
Rental Roll-outs 13
T&E
Rental Roll-outs
2006 CATERPILLAR 725 ARTICULATED TRUCK
2007 CATERPILLAR 730EJ ARTICULATED TRUCK
Catalog #: CU736978, Serial #: B1W00268,
SMU/Hrs: 3320, Fast Fuel Filler, Cold Weather
Starting Aid, Heated Rear View Mirror, Tires:
750/65, C11 ACERT Engine S/N RSX07254.
Anchorage, AK.
Catalog #: CU606909, Serial #: B1L00749,
SMU/Hrs: 2977, Engine S/N RSX03146, Body
Liner, Scissor Tailgate, Rear View Heated
Mirror, 23.5R25, TM518 Tires. Fife, WA.
$228,300
2006 CATERPILLAR 303.5C CR TRACK EXCAVATOR
$323,500
2005 CATERPILLAR 308C CR TRACK EXCAVATOR
Catalog #: CU890007, Serial #: KCX00709,
SMU/Hrs: 2452, Engine S/N 00GR3440, Travel
Alarm, One-Piece Boom, 12V-5A Power
Supply, Hand Control Pattern Changer, 97”
Blade, Single Function Auxiliary Hydraulics,
High Pressure, Auxiliary Boom Lines, Pin
Grabber Quick Coupler, High Ambient Cooling,
Cab with Polycarbonate Windows, 7’3” Stick,
Bucket Linkage, Cab Mounted Lights, 24”
Triple Grouser Track. Chehalis, WA.
Catalog #: CU892731, Serial #: DMY00523,
SMU/Hrs: 906, Pin Grabber Manual Quick
Coupler, Hydraulic Thumb S/N 7JW05958
Cab with Heater, Boom Lights, Cab Lights,
Double Element Air Cleaner, Straight Blade.
Anchorage, AK.
$38,900
2005 CATERPILLAR 312C L TRACK EXCAVATOR
$73,000
2008 CATERPILLAR 325D L TRACK EXCAVATOR
Catalog #: CU892641, Serial #: CBA02401,
SMU/Hrs: 2962, CWT Manual Wedge QC
S/N 7XW00552, CWT P/L Thumb
S/N PMZ01594, Cab with Polycarbonate
Windows, Travel Alarm, One-Piece Boom,
Hand Control Pattern Changer, Cab
Mounted Working Lights, 9’10” Stick, Heavy
Duty Bottom Guard. Anchorage, AK.
Catalog #: CU1401084, Serial #: A3R01298,
SMU/Hrs: 1392, Heavy Duty Bottom Guard,
Hand Control Pattern Changer, Track Guiding
Guard, Cold Weather Start, 10’6” Stick, Boom
Reach (20’2”), 32” Triple Grouser Track, Pin
Grabber Coupler w/o Pins. Billings, MT.
$94,500
$240,800
2010 CATERPILLAR 345D L TRACK EXCAVATOR
2009 CATERPILLAR 365C L TRACK EXCAVATOR
Catalog #: CU1399625, Serial #: MCS00522,
SMU/Hrs: 849, 25’7” Reach Boom, Vandalism
Guard, Counterweight Removal Device, Air
Conditioner, Travel Alarm, 36” Heavy Duty
Double Grouser Track, Stick R15’4”.
Billings, MT.
12’10” Stick, 22’8” Reach Boom, 36” Triple
Grouser Track, Deluxe Cab, Heavy Duty
Bottom Guard, Cold Weather Starting
Kit, CWT 10,180 lbs with Removal Device.
Billings, MT.
$389,100
2008 CATERPILLAR 140M MOTOR GRADER
$569,400
2005 CATERPILLAR CB-634D VIBRATORY
DOUBLE DRUM ASPHALT ROLLER
Catalog #: CU854671, Serial #: B9D00686,
SMU/Hrs: 2720, 14’ x 27” X 1” Blade, Front
Headlights, 2’ LH Blade Extension, VHP Plus
Engine. Anchorage, AK.
$269,800
On approved credit. All equipment subject to price/configuration change and/or prior sale. All units FOB location listed. Prices listed apply to
outright purchase only. Estimated hours subject to change. Offers expire 10/31/11.
Catalog #: CU1238096, Serial #: CDF00548,
SMU/Hrs: 877, Open ROPS, Water Spray
System, Standard Nozzles. Billings, MT.
$134,000
Industry-Leading Customer Service
S U M M E R 2 0 11
14 Rental roll-outs
T&E
Rental Roll-outs
2006 CATERPILLAR TH580B TELEHANDLER
2005 CATERPILLAR D4G LGP Track Type Tractor
Catalog #: CU890195, Serial #: TLX00840, SMU/Hrs:
2737, Machine has been rented since paint job,
Engine S/N MHK11800, Lights, Canopy, Heater, Rock
Idler Guard, Ether Starting Aid, D4G LGP.
Tukwila, WA.
Catalog #: CU892677, Serial #: SLH01087,
SMU/Hrs: 5134. Anchorage, AK.
$65,000
2006 CATERPILLAR D4G LGP Track Type Tractor
$59,800
2005 CATERPILLAR D6RII XL TRACK TYPE TRACTORS
Catalog #: CU526658, Serial #: AAX01281, SMU/Hrs:
3542, ROPS Cab w/AC, Drains, Ecology, Powertrain,
Heavy Duty Track, Guiding Guard, 22” ES (41 SEC)
Offset Track, Heavy Duty Heater, 120V Engine
Coolant Heater, Hydraulics, Multi-Shank (6) Ripper,
S/N 1EH02887. Anchorage, AK.
Catalog #: CU892741, Serial #: TLX01076, SMU/Hrs:
2976, Lights, Canopy, Heater, Idler Rock Guard,
Ether Starting Aid, D4G LGP Blade, Antifreeze -50C
(-58F). Anchorage, AK.
$71,500
2007 CATERPILLAR 930G WHEEL LOADER
$273,600
2009 CATERPILLAR 980H WHEEL LOADER
Catalog #: CU915790, Serial #: TWR03397, SMU/Hrs:
1113, Engine S/N CPT31368, Standard Steering, 80
amp Alternator, Deluxe Cab, Emissions Package
– Tier 2 Compliant, Quick Disconnect 3V Standard
Coupler, 2.9 CYD GP Bucket, Carriage Forks, Ride
Control, 3rd Function Hydraulics, 20.5-R25 X HA L3
Michelin Tires. Tukwila, WA.
Catalog #: CU1387752, Serial #: JMS05267, SMU/
Hrs: 675 29.5-R25 VMT BS L3 Tires, AM/FM/CD
Radio (CB Radio Ready), Engine Coolant Heater,
Ether Starting Aid, FastFill Fuel System, 95 AMP
Alternator. Anchorage, AK.
$132,800
$456,900
On approved credit. All equipment subject to price/configuration change and/or prior sale. All units FOB location listed. Prices listed apply to outright purchase only. Estimated hours subject to change. Offers expire 10/31/11.
Equipment for any budget specials
Spotlight on Genie®
GS™-1930 Self Propelled
Scissor Lifts
Spotlight on
Wacker™ BTS 1035
T&E
Spotlight on
Pro-Tec AS Series 8’x 8’
Trench Shields
Safe-T-Shore Steel
4”x4’x16’ Trench Shields
•25 ft. working height
Wacker
BTS 1035
•Up to 500 lb. capacity
• Portable
Pro-Tec AS Series
8’x 8’ Trench
Shields
•New unit comes with standard
Genie warranty
• Long life lubrication piston
• 16’ depth rating in C-60 soil
• 23’ depth rating in C-60 soil
• Innovative air cleaner
design
• 30” pipe clearance
• 22” pipe clearance
• New unit comes with
standard Wacker warranty
• 1,120 lbs.
• 4,130 lbs.
• 2.75” sidewall
Genie GS-1930
Safe-T-Shore
Steel 4”x4’x16’
Trench Shields
Buy New for
Buy New for
Buy New for
Buy New for
$12,725
$1,125
$6,450*
$6,400*
one Unit Only
one Unit Only
one Unit Only
one Unit Only
FOB Helena, MT
FOB Billings, MT
FOB Yakima, WA
FOB Great Falls, MT
* price does not include spreaders
* price does not include spreaders
ID # 28N66818
OR
Buy any of the following
well-maintained rental fleet units!
ID #
Location
Sale Price
20N00869
Anchorage, AK
$5,200
26N57119
Wenatchee, WA
$5,500
21N00314
Tukwila, WA
$8,300
17168
Williston, ND
$8,800
27N63012
Tukwila, WA
$8,900
17260
Billings, MT
$8,900
28N65400
Tukwila, WA
$10,000
ID# 26A15188
ID # 26N57745
OR
Buy any of the following
well-maintained rental fleet units!
ID #
Location
Sale Price
3739
Billings, MT
$400
3751
Helena, MT $400
3839
Great Falls, MT
$400
3841
Helena, MT
$400
07T004
Helena, MT
$500
26A15186
Anchorage, AK
$500
07T003
Bozeman, MT $600
26A15184
Wasilla, AK
$1,000
ID # 26035
OR
OR
Buy any of the following
well-maintained rental fleet units!
ID #
26N57742
26N57746
State
Anchorage, AK
Monroe, WA Sale Price*
$4,400
$5,700
Buy any of the following
well-maintained rental fleet units!
ID #
27332
27331
27452
27516
State
Bozeman, MT
Helena, MT
Bozeman, MT
Billings, MT
Sale Price*
$3,200
$3,400
$5,200
$5,500
On approved credit. Offer expires October 31, 2011. Offer valid in N C and T&E territories only. All equipment subject to price change and/or prior sale. All rental fleet units FOB nearest N C Machinery or
T&E location. All used equipment is sold as-is/where-is. Prices listed apply to outright purchase only. Any specifications published are approximate and vary depending on configuration. Units pictured
are stock photos and may not be of the actual equipment offered. Certain restrictions apply; contact your N C The Cat Rental Store or T&E The Cat Rental Store sales representative for details.
Industry-Leading Customer Service
S U M M E R 2 0 11
POWER SYSTEMS RENTAL ROLL-OUTs and used ag equipment 15
Used power systems
60 HZ, Dual Voltage, 400kW, ID# E296064, 3940 hours, EMCP2+ panel, auto start, safety
shutdowns, sound attenuated enclosure, trailer mounted, battery charger, alternator,
coolant heater, radiator, critical exhaust system.
2008 Multiquip DCA150
rental generator
2007 Caterpillar XQ400
rental generator
2004 Caterpillar XQ400
rental generator
60 HZ, Dual Voltage 400kW, ID# EL273376, 4437 hours, EMCP2+ panel, auto start, safety
shutdowns, sound attenuated enclosure, trailer mounted, battery charger, alternator,
coolant heater, radiator, critical exhaust system.
60 HZ, Dual Voltage 132kW, ID# E285144, 5144 hours, duel fuel tank, auto start, safety
shutdowns, Ultra Silent Series sound attenuated enclosure, trailer mounted, battery
charger, alternator, coolant heater, radiator.
$91,900
$84,000
2006 Caterpillar XQ300
rental generator
2007 Caterpillar XQ45
rental generator
$47,900
POWER
when you need it.
Sales, Leases, and Rentals of:
• Mobile generators up to 2,000 kW
• Air compressors up to 1,600 cfm
• Distribution and transformers
60 HZ, Dual Voltage 45kW, ID# EL273347, 2973 hours, auto start, safety shutdowns,
sound attenuated enclosure, trailer mounted, switchable voltage selector, UL double
wall fuel tank.
60 HZ, Dual Voltage, 300kW, ID# E258931, 6077 hours, EMCP2 panel, auto start, safety
shutdowns, sound attenuated enclosure, trailer mounted, Battery charger, alternator,
coolant heater, radiator, exhaust system.
$79,900
$28,400
• Load banks: 200 kW to 10 MW (resistive/reactive)
• Water chillers: 25 to 525 tons
• Air conditioners: 5 to 90 tons
…and much more
On approved credit. All equipment subject to price/configuration change and/or prior sale. All units FOB Tukwila, WA. Prices listed apply to outright purchase only. Estimated hours subject to change. Offers expire 10/31/11.
Used farm Equipment Specials
Your Agricultural Big Iron Specialists
‘03 CHALLENGER MT565, Stk: L270039,
32 Hrs, 4WD, Dls, Air Seat, Wts .... $110,710
2006 CHALLENGER MT555B, 712 Hrs,
Stk: B9247F, CVT, Ldr / Grpl............. $136,040
AG-CHEM TERRA-GATOR 9103, Stk:
B11975, 3310 Hrs, Loaded, Auto-Guide,
Runs Good......................................... $103,500
2002 CHALLENGER MT255, 20 Hrs, Stk:
22W43307, ML20 Ldr, MFWD . ......... $16,443
2005 CAT 420D, Stk: 10W68958, 2051 Hrs,
Quick Coupler, 36’’ Bkt and 1.4 CYD GP
Bucket.................................................. $42,000
‘96 AG-CHEM TERRA-GATOR 1903, Stk:
B13488, 8270 Hrs, Good Running Unit.......... .............................................................. $16,000
‘06 AG-CHEM TERRA-GATOR 8103, 3500
Hours, Smart Trax, Viper Controller....CALL
1969 CAT D4D, Stk: B12908, OROPS,
Drawbar, Aux Hyds, Sweeps, Blade-S,
Steer-Lever ........................................ $16,500
1993 CAT D3C II, Stk: 10W69306, 2884 Hrs,
14’’ Tracks, OROPS, NICE UNIT....... $16,000
2001 CAT 345BL II, Stk: 27A16130, 9229
Hrs, 22’ 8’’ Reach, 12’ 10’’ Stick, 30’’ Triple
Grouser Tracks................................. $137,750
2009 CAT 966H, Stk: B11368, 2841 Hrs, Ride
Control, CB Radio, AM/FM/ CD, 5.25 CYD
Bucket................................................ $302,900
2008 CAT 247B II, Stk: 29W67395, 280 Hrs,
Quick Coupler..................................... $27,500
D
L
O
S
2003 CAT 216, Stk: 10W69129, ONLY 954
Hrs, Quick Coupler, Engine Block Heater.... .............................................................. $11,375
2005 CHALLENGER MT425B, Stk: P096011,
35 Hrs, 40 HP, OROPS, Front Weights, 4WD
.............................................................. $34,500
2006 305C CR, 1999 Hrs, 2 Way Aux Hyds,
Counterweight, Canopy, Blade, w/ Thumb
Bracket
ADDITIONAL QUALITY USED EQUIPMENT FOR SALE
2006 CAT 257B, Stk: 10W68164, 600 Hrs,
Multi Terrain, Engine Block Heater, Heat &
Defrost................................................. $33,250
TRACTOR
2002 CHALLENGER MT295, Stk: 22N01542, 10 Hrs
SKID STEERS
P-Shift, 4WD, ML40 Loader, 72’’ Bkt................... $29,498
2008 CAT 246C Stk: P10006, 773 Hrs. .................. $26,300
2008 CAT 256 Stk: PL9929G, 1502 Hrs. ................ $35,900
2007 CAT 252 Stk: P8660G, 683 Hrs. ....................... SOLD
2007 CAT 262 Stk: B7595G,1226 Hrs ................... $33,400
2007 CAT 272C Stk: B8771G, 1443.5 Hrs. ............... SOLD
LOADER BACKHOE
2007 CAT 420E Stk: B7605G,1317 Hrs.................. $64,400
EXCAVATOR
2007 CAT 328 Stk: B7707G, 1450 Hrs....................... SOLD
DOZER
2005 CAT D3G XL Stk: P4726G, 959 Hrs ............. $64,500
WHEEL LOADER
2005 CAT 930G Stk: B5361G, 2860 Hrs ............... $87,400
HAY EQUIPMENT
2008 CHALLENGER PTD15, Stk: B10955, Swivel
Tongue, New Warranty Available!..................... $40,900
2008 CHALLENGER PTS16, Stk: B10955.............. $33,500
1998 CASE IH 8480, Stk: B11155............................. $3,200
2002 CHALLENGER RB56, Stk: B2652F, No Bales,
NEW CONDITION, Carry Over............................. $31,744
HEADER
LEXION F530, Stk: B12039-HD.............................. $18,500
On approved credit. All equipment subject to price change and/or prior sale. All units FOB T&E or N C Machinery location nearest to machine. Estimated hours subject to change. Offers expires 10/31/11.
Industry-Leading Customer Service
S U M M E R 2 0 11
16 general dealership
New Faces/Promotions
J.D. Nelson
N C Machinery and Tractor & Equipment Co. are pleased to announce the appointment
of J.D. Nelson as Rental Services General Manager.
He will be responsible for leading the sales and rental representatives and overseeing
the rental operations for N C The Cat Rental Store and T&E The Cat Rental Store in Alaska,
Montana, North Dakota, Washington, and Wyoming.
J.D. has been with T&E The Cat Rental Store for over 13 years. His previous position was
Regional Manager. His experience includes Rental Store Branch Manager and Rental Sales Representative.
He can be reached at his Billings, Montana direct line number at 406-651-8306, by cell phone at 406-671-2246,
or through the N C Seattle branch at 425-251-5800.
N C Machinery
Washington Branch
Locations
Mt. Vernon
800-529-9790
Ralph Young
N C Machinery and Tractor & Equipment Co. are pleased to announce the appointment
of Ralph Young as Used and Heavy Rental Sales Manager.
Ralph will be responsible for leading the Used Equipment and Heavy Rentals operations
in Alaska, Montana, North Dakota, Washington, and Wyoming. He will also oversee the
used equipment sales representatives for both T&E and N C Machinery.
He has been with Tractor & Equipment Co. for 16 years. His most recent position was as
General Sales Manager. His experience includes Area Sales Manager and Sales Representative.
Ralph can be reached at his Billings direct line number 406-651-8227, by cell phone at 406-698-5768, or through
the N C Seattle branch at 425-251-5800.
Port Angeles
360-452-9222
Allen Evans
N C Machinery and Tractor & Equipment Co. are pleased to announce the appointment
of Allen Evans as Governmental Sales Manager for T&E and N C Machinery.
Allen will have responsibility for overseeing all governmental machine sales operations
in Alaska, Montana, North Dakota, Washington, and Wyoming.
Allen brings a diverse background that includes working in the commercial real estate,
information technology, and construction industry fields. His experience includes 5 years
with N C Machinery as Sales Representative and Sales Manager.
He can be reached at the N C Machinery’s Seattle branch at 425-251-5873, by cell phone at 206-423-7419, or at
the T&E Billings branch at 406-656-0202.
Wayne Lowman
N C Machinery and Tractor & Equipment Co. are pleased to announce the appointment
of Wayne Lowman as Mining General Sales Manager.
Wayne will be responsible for overseeing mining equipment sales in Alaska, Montana,
North Dakota, Washington, and Wyoming.
His experience includes work in many departments of a major mining equipment
manufacturer, and leading the North American excavator launch for a major Japanese
equipment manufacturer. Most recently, he spent seven years as Mining Sales Manager and Account Manager for
a Cat dealer.
Wayne can be reached at the N C Seattle branch at 425-251-6304, by cell phone at 425-466-2297, or at the T&E
Billings branch at 406-656-0202.
Jason Lenhardt
N C Machinery and Tractor & Equipment Co. are pleased to announce the appointment
of Jason Lenhardt as Agricultural General Sales Manager.
Jason has over 12 years experience in agricultural sales and marketing including
extensive experience with AGCO Challenger, LEXION, and Seed Hawk equipment. He has
worked for Caterpillar as Marketing Specialist for the Challenger line. His experience also
includes work with AGCO and management for another Caterpillar dealer. He joined T&E in
2010 as Agricultural Sales Manager.
He graduated from Montana State University with a degree in Business and Agronomy.
Jason can be reached at the Billings branch at 406-656-0202 or by cell phone at 406-698-2365.
Ralph Simonds
N C Machinery and Tractor & Equipment Co. are pleased to announce the appointment
of Ralph Simonds to the new position of Technical Services Manager.
As Technical Services Manager Ralph is responsible for overseeing and integrating
technical communications, in-house technician training, and warranty management
operations to increase efficiency across the Alaska, Montana, North Dakota, Washington,
and Wyoming territories.
Ralph has over 12 years experience at N C Machinery. His most recent position was Technical Services
Supervisor at the Seattle branch. He also has experience as a technical communicator.
He can be reached at the Seattle branch at 425-251-5800 or by cell phone at 425-766-6702.
Scott Jensen
N C Machinery is pleased to announce the appointment of Scott Jensen as Product
Support Sales Representative for the Yakima branch.
Scott will be responsible for providing heavy equipment and truck engine product
support in Yakima and Kittitas counties.
He has worked for N C Power Systems for 15 years. His previous position was as
Product Support Sales Rep for truck engines.
He can be reached at the Yakima branch at 509-248-2371 or by cell phone at 509-480-1822.
Toby Newhouse
N C The Cat Rental Store is pleased to announce the appointment of Toby Newhouse as
Rental Sales Representative at the Monroe branch.
Toby comes to N C The Cat Rental Store with 7 years experience as a Senior Loan
Officer in the Mortgage industry and 2 years in the construction supply industry.
Toby will be responsible for the sales and rental of compact and medium-sized Cat
equipment and other preferred brands of construction equipment and supplies.
Toby can be reached at the Monroe branch at 360-805-6000 or by cell phone at 425-766-0649.
Jim O’Steen
N C Machinery is pleased to announce the appointment of Jim O’Steen as Rental Sales
Representative for the Fife and Port Angeles branches.
Jim has 15 years experience in the rental industry. His most recent experience was
Rental Coordinator at the Port Angeles branch.
He will be responsible for the sales and rental of compact to medium-sized Caterpillar
equipment and other preferred brands of construction equipment and supplies.
He can be reached at the Fife branch at 253-896-0890 or by cell phone at 360-448-3514.
Want your own
copy of the
N C Update?
www.ncmachinery.com
Monroe
360-805-6000
Seattle
Wenatchee
800-562-4735 800-827-5147
Fife
866-728-5203
Chehalis
Yakima
800-422-7891
800-234-5564
Dut
907
Contacts
Equipment Sales
Mike Gilbert
Jay McKown
Matt Benford
Martin Urcuyo
Mark Kalamar
Bob Nelson - Governmental
Jason Serena
Tony Davick
Gary Montgomery
Bill Moore
Agricultural Sales
Eric Weber
Product Support
Greg McClelland
Jeff High
Bill Nevares
Joe Gatewood
Mike LeMaster
Brady Viaene
Jeremy Parkins
Scott Jensen
Rental
Scott Mangold
Dennis Furu
Jim O’Steen
Toby Newhouse
Mike Livers
Ryan Arden
Dave Massey
William Krueger
Location
Cell Phone
Branch
Chehalis
Fife
Fife/Port Angeles
Monroe/Mount Vernon
Seattle
Seattle
Seattle
Wenatchee
Wenatchee
Yakima
360-581-3994
253-255-6371
253-405-1014
360-941-0709
253-261-2669
206-330-3549
425-766-5356
509-750-5731
509-670-8923
509-952-7610
360-748-8845
253-896-0878
253-896-0878
360-424-4292
425-251-5800
425-251-5800
425-251-5800
509-886-5561
509-886-5561
509-248-2371
Location
Cell Phone
Branch
Wenatchee
509-431-3030
509-886-5561
Location
Cell Phone
Branch
Chehalis
Fife
Monroe/Mount Vernon
Port Angeles
Seattle
Seattle
Wenatchee
Yakima
360-508-0290
206-261-0002
360-661-0438
360-731-2624
253-405-7015
253-670-2200
509-679-0237
509-480-1822
360-748-8845
253-896-0878
360-424-4292
360-452-9222
425-251-5800
425-251-5800
509-886-5561
509-248-2371
Location
Cell Phone
Branch
Fife
Fife/Chehalis
Fife/Port Angeles
Monroe
Monroe/Mount Vernon
Seattle
Wenatchee
Yakima
253-350-4331
360-508-0559
360-448-3514
425-766-0649
425-508-1665
253-405-6765
509-630-7801
509-728-4228
253-896-0890
253-896-0890
253-896-0890
360-805-6000
360-805-6000
425-251-6400
509-886-3271
509-457-3965
Location
Cell Phone
Branch
Tukwila
Tukwila
Tukwila
Tukwila
Tukwila
425-241-0817
206-510-3491
206-818-7546
206-510-8825
206-730-3535
425-251-5877
425-251-5877
425-251-5877
425-251-5877
425-251-5877
Rental
Art Kercher
Charlie Tomsett
Tukwila
Tukwila
206-510-2182
206-419-8508
425-251-5877
425-251-5877
Product Support
Rick Emerick - Marine, Industrial
Mark Phillips - Marine
Scooner Rice - Electric Power
Leonard Spencer - Marine
Tukwila
Tukwila
Tukwila
Tukwila
206-910-2813
206-818-6470
206-390-5152
206-730-5686
425-251-5877
425-251-5877
425-251-5877
425-251-5877
206-818-8155
425-251-5877
Power Systems
Equipment Sales
Chris Blazevich - Marine
Brant Briody - Electric Power
Chris Downes - Marine
Don Lee King - Electric Power
Andy Parker - Industrial/OEM
Vocational Truck Sales and Truck Engine Product Support
Sonny Clonninger
Tukwila
To get your FREE subscription started, log on to
www.ncmachinery.com and sign up to have
the next N C Update delivered to your door!