docGeneral Purpose Clutches
download 
Report Transcription
General Purpose Clutches Typical Applications Construction Equipment (trenchers, concrete cutters) Stump Grinders Ag Equipment (grain augers, row seeders) Portable Saw Mills Reasons to Use an Electromagnetic Clutch for General Applications Remote actuation Safety Reduced power consumption from the engine Simple installation Operator convenience Cold weather starting General Purpose Clutches: These are typically bearing mounted clutches, which can be used in a variety of mobile, agricultural, marine, or lawn and garden applications. They can be mounted on either the driving or driven shaft. Ogura Design Advantages Solid forged rotor Different coil voltages available High temperature, longer life grease E-coating High temperature epoxy coil Forged machined pulley Reduced burnishing time Other Products Available From Ogura 2 1 5 3 4 1. Multiple disc clutches for use within a gearbox 2. Marine duty clutches for auxiliary driven components (pumps, generators, compressors) 6 3. Tooth clutches to transmit the highest torque in the smallest space with minimal backlash 4. PTO clutch/brakes for cutting blades on consumer and commercial mowing equipment 100 Randolph Road 5. Electric clutches for pumps and compressors P.O. Box 5790 Somerset, NJ 08875-5790 6. Spring-applied brakes for stopping and holding apTel: (732) 271-7361 plications for motors and automated machinery Fax: (732) 271-7580 www.ogura-clutch.com [email protected]
Similar documents
PTO Clutch/Brakes for Outdoor Power Equipment
Operator convenience
Compact clutch/brake combination
Easy installation
PTO Clutch/Brake:
These are bearing mounted clutch/
brakes normally mounted directly on the
engine shaft. They are designed t...
Torque/Tension Control Clutches and Brakes brochure
eliminating high breakaway torques that can occur with mechanical devices. Since units
do not produce wear particles, there is no concern about contamination. Torque is
consistent over given speed ...
1st Quarter 2012 (Vol. 50)
(QR codes) to its advertising and catalogs so that customers with massive heart attack.
cell phones can simply scan the code and they will be taken to the releDave was 69 years old and had been
van...
Vol. 67
The Ogura GT1 PTO clutch/brake is attached directly to the
15 hp Kohler engine shaft. The operator flips the PTO switch that
applies 12V to the clutch, engages the clutch pulley and belt and turns
...
OGURA CLUTCH THAILAND INCREASES PRODUCTION ISO9001
company that put this system driving new plastic roller
The Ogura
together (Dochteren Ind.
gears and clutch/generator
MMC 70 is used to
Automation) is pleased with
electrically engage and
the perfo...
4th Quarter 2012 (Vol 53)
worked with us to supply a fast off the shelf solution.” After some discussion on loads, environment
and life needed, Ogura
suggested its MA-GTJD22 12VDC general
purpose clutch. This one
piece clut...