Isodel

ROLLERS
HEAT INSULATED COVERS
Jupiter and Neptune
Rollers for large sized pools
WARRANTY
3
Isodel
YEARS
Choose the right roller
Foam cover
• The choice of a roller depends on the pool size,
the type of cover (bubble, foam) and its position
(fixed, mobile, wall mounted...).
A perfect finish, the DEL signature
Motorised Jupiter
Strap braking system
ensuring the slowing or
blockage of the shaft.
Polystone case with
Ø 30mm stainless
steel shaft
Jupiter - 1 shaft - 50 linear metres,
manual or motorised
For 10 to 50m long pools
Manual version
• Smooth mast Ø 130mm - thickness 4mm.
• 4 lengths: 5.50 - 6.60 - 8.00 - 8.50 m.
• Height at the shaft 70cm.
• Maximum coverage length 50m.
Motorised version
Roller specifications identical to the Jupiter manual version
• Motorisation using a gear motor: 120 Nm 24 Vdc
up to 25 linear metres, 250Nm beyond (24 Volt socket included).
• 1 electric box including: the remote 2 command radio control
with emitter and receiver, electric protection
and command and transformer relays
(electric cables not supplied).
• 1 antenna with its support on the box.
Neptune - 2 shafts- 25 linear metres,
manual or motorised
For 10 to 25m long pools
Manual version
• Height at the shaft 1st mast 70cm, 2nd mast 128cm.
• 4 length: 5.50 - 6.60 - 8.00 - 8.50m.
• Maximum cover lengths 25m.
Motorised version
Roller specifications identical to the Neptune manual version.
• Motorisation using a gear motor: 120 Nm 24 Vdc up to 25m.
• 1 electric box including: the remote 2 command radio
control with emitter and receiver, electric protection
and command and transformer relays (electric cables
not supplied).
• 1 antenna with its support on the box.
Ø 130mm aluminium mast Th. 4mm anodised with handle
Manual Jupiter
Stainless
steel
base
Motorised Neptune
Stainless steel
handle with
revolving
handle
4 swivelling
wheels Ø 125mm
of which 2 with
brakes
trap braking system
S
ensuring the slowing or
blockage of the shaft.
Polystone case with
Ø 30mm stainless
steel shaft
Ø 130mm aluminium mast
Th. 4mm anodised with handle
Stainless steel
base
Manual Neptune
4 swivelling wheels
Ø 125mm of which
2 with brakes
Stainless steel
handle with
revolving handle
RCS PARIS B 394 209 100 • Photos not binding • 10/12
• Reliability and long lived materials
• Semi-automatic or automatic
• Made in France
13232
For more information about your project ask your pool professional for advice.
HEAT INSULATED COVERS
HEAT INSULATED COVERS
Isodel
The ideal heat insulated
cover for indoor pools,
either public or large sized.
• Maintains water temperature.
• Makes it possible to save water and energy.
• Prevents evaporation and overuse of the dehumidifier.
• Reduces the relative humidity of the air and extends
the building's lifespan.
Quality design and finish
• DEL has designed ISODEL for quick, easy and simple handling,
and a maximum lifespan.
• ISODEL covers are manufactured using a blue polyethylene
foam, 5 or 7mm thick with a very low water absorption rate,
with the top covered by a perfectly smooth and strong coating,
making maintenance easy, and with a watertight moisture
barrier film on the underside.
Isodel Eco
5 or 7mm
The ideal cover for indoor pools,
both private and public
WARRANTY
1
YEAR
28°C
• Resistance to chlorine and temperature is excellent
(normal temperature in use < 28°C).
• The strips of ISODEL are laid out along the width of the pool,
the rolling diameter is not increased by longitudinal welds,
which are a deteriorating factor and provide uncertain rolling.
PRODUCT +
• Recommended for pools < 100m²
• Maintains water temperature
• Avoids evaporation
• Easy to maintain, smooth upper surface
• Avoids overuse of the dehumidifier
• Excellent resistance to chlorine.
Isodel Luxury
5 or 7mm
Heat insulated cover for public pools
and large sized pools
WARRANTY
1
YEAR
28°C
PRODUCT +
• Recommended for pools > 100m²
• Recommended for motorised rollers
• Excellent resistance to chlorine
• Avoids overuse of the dehumidifier
• Easy rolling thanks to the foam starter floater
and the pull rope
Specifications:
Specifications:
• Closed cell insulating floating foam cover, “Isodel 5 and 7mm”.
• Colour: blue.
• Thermal conductivity (DIN 52.612), at 0°C: 0.038 W.
• Water absorption (DIN 53.5428): 0.6% of the volume for
a temperature of 22°C
• Permeability to water vapour (DIN 53.122): 0.48g/m2/24 hours.
• Weight “Isodel 5”: 400g/m2, “Isodel 7”: 500g/m2.
• Stability to temperature in normal conditions of use: 28°C.
• Use above 30°C reduces its lifespan.
• Closed cell insulating floating foam cover, “Isodel 5 and 7mm”.
• Colour: blue.
• Thermal conductivity (DIN 52.612), at 0°C: 0.038 W.
• Water absorption (DIN 53.5428): 0.6% of the volume for
a temperature of 22°C
• Permeability to water vapour (DIN 53.122): 0.48g/m2/24 hours.
• Weight “Isodel 5”: 400g/m2, “Isodel 7”: 500g/m2.
• Stability to temperature in normal conditions of use: 28°C.
• Use above 30°C reduces its lifespan.
N.B: Not recommended for ozone treatments.
N.B: Not recommended for ozone treatments.
Manufacture:
• Assembly with a 4cm reinforcement on each band on the
top of the cover.
• Reinforced polyethylene fabric 7cm strengthener along the
length of the underside of the cover. A strap every 1m.
• On the roller side: oval eyelets - 2.00m straps with velcro
and reinforcement - traction bar.
• Opposite side: foam starter floater - drag rope
Manufacture:
• Assembly with a 4cm reinforcement on each band on the top
of the cover.
• Reinforced polyethylene fabric 7cm strengthener along the
perimeter and on each band on the underside of the cover.
• Brass 16mm eyelets every 50cm on one width on the roller
side and in each angle on the opposite side.
N.B: This model is not recommended for surfaces less than 20m2,
but highly recommended for pools larger than 100m2.
N.B: This model is not recommended for surface areas greater than 100m2.
Foam starter floater with drag rope