Roll-O-Matic - O

Roll-O-Matic
®
ROLLER MOP
Use & Care
To begin mopping, soak mop head in water and pull
back on handle to wring sponge out. Use full size
scrubber to remove stubborn dirt. Vinegar and bleach
are not recommended. Vinegar can cause metal to rust
if left on sponge. To store: rinse sponge thoroughly with
water, wring out excess water, and hang by end cap.
Ref ills available
Change refill every 3-6 months for best results.
Ref ill instructions
To remove
To replace
Stand mop upright with sponge
facing up. Ensure handle is in
non-wringing position. Simply press
rods inward where hook ends enter
mop head brackets. Press rods down
to free mop head. Remove sponge
by sliding out.
Slide sponge onto head, making
sure scrubber part of sponge faces
the same direction as the handle.
Ensure handle is in non-wringing
position. Simply press rods inward
where hook ends enter mop head
brackets. Pull handle down to
secure mop head.
Refills available
Check out our complete line of cleaning products at ocedar.com
Angler® Angle Broom
w/ Dust Pan
Easy Pour
Bucket
TM
Pro Scrub®
Roller Mop
Heavy Duty Scrunge®
(2, 4 & 6 Pack)