User Guide

Transcription

User Guide

User Guide
Description of “security pack” installation for IS OTE
in WINDOWS
Version: I
28.11.2008
Instalace_sec_pack_Eng.doc
Page 1 / 30
CONTENTS
1
Checking for the Correct Version of Internet Explorer................................3
2
Connecting the Device.......................................................................................3
3
Installing the SW...............................................................................................3
3.1
GEMSAFE Card Reader............................................................................3
3.2
USB token iKey 2032 – CIP Utilities v6.1................................................7
4
Automatic Certificate Registration..................................................................9
4.1
Card Reader ...............................................................................................9
4.2
USB token iKey 2032 ................................................................................9
5
Importing and Registering OTECA in the Windows Certificate Store.......9
6
Attachment 1 – Setting Up Internet Explorer for Access to OTE ..............13
7
Attachment 2 – SUN Java installation and configuration...........................19
7.1
How to uninstall MS Java application.....................................................19
7.2
Verification and configuration of workstation on Sun Java ....................20
7.3
Sun Java Installation instructions ............................................................21
7.4
Internet browser settings ..........................................................................24
7.5
Sun Java settings......................................................................................25
7.6
Installation of certificate and others security settings..............................27
7.7
Setup of rights..........................................................................................28
8
Version: I
Attachment 3 – Registration of file extensions for import/export of data in the
OTE application ..............................................................................................29
28.11.2008
Page 2 / 30
1 Checking for the Correct Version of Internet Explorer
For correct security activity in IS OTE, MS Internet security v IS OTE MS Internet
Explorer version 6.0 with applied security patches (SP2) and the service packs issued
by Microsoft with “High Encryption” must be used or MS Internet Explorer version
7.0
Verification: Run IE / Help / About Internet Explorer – Cipher Strength 128-bit is
necessary.
2
Connecting the Device
We connect the reader prior to the installation of the corresponding SW, whereas
the USB token must be connected after installation!
Prior to connecting the card reader to the serial port the computer must be turned
off, to prevent damage to the card reader!
3
Installing the SW
To enable installation the user must have local administrator rights.
3.1
GEMSAFE Card Reader
Run the GemSAFE 3.2.2 installation application by running the setup.exe file
from GEMSAFE installation directory and perform the installation following the
directions in the installation program. The installation is demonstrated in the following
figures.
Version: I
28.11.2008
Page 3 / 30
Version: I
28.11.2008
Page 4 / 30
Version: I
28.11.2008
Page 5 / 30
Before restarting the computer make sure that the Windows installation contains the
VB6FR.DLL library in the directory %SystemRoot%\system32. If it does not, it needs
to be copied to this location (it is included in the installation pack).
Then the computer can be restarted:
Version: I
28.11.2008
Page 6 / 30
3.2
USB token iKey 2032 – CIP Utilities v6.1
First of all Ikey 2032 (SafeNet iKey Driver v4.0.0.1011) should be installed
Version: I
28.11.2008
Page 7 / 30
Follow with CIP Utilities v6.1 (SafeNet BorderLess Security PK Klient)
installation.
Version: I
28.11.2008
Page 8 / 30
4
Automatic Certificate Registration
4.1
Card Reader
CertReg runs when the computer is started up and ensure registration of a certificate
when it is inserted/removed into/from the card reader.
It’s activity is demonstrated in the system list with an icon of a card reader.
4.2
USB token iKey 2032
The CIP Utilities installation contains the win32 service which runs when a computer
has been started and which detects the insertion of a token. This ensures the automatic
import/removal of certificates located on tokens.
5
Importing and Registering OTECA in the Windows Certificate Store
It is also necessary to import the root certificate for work with IS OTE(OTECA)
NEW_OTECA.cer which is included in the installation pack into Windows
2000/Windows XP.
Version: I
28.11.2008
Page 9 / 30
We import a certificate by chosing the Install Certificate option from the context menu
or by clicking on the button showing information about the certificate in the dialogue
box:
Here you can keep the automatic selection, because the system will recognise the fact
that the concerned are certificate authorities.
Version: I
28.11.2008
Page 10 / 30
If this dialogue box appears, the certificate has been successfully imported:
WARNING: Registration of all imported certificates relates to the WINDOWS
2000/Windows XP user account which is logged on.
When first logging on to IS OTE when the above imported certificates are displayed
check the “Always trust this certificate” check box so that the user is not asked this
question repeatedly.
Version: I
28.11.2008
Page 11 / 30
Version: I
28.11.2008
Page 12 / 30
6
Attachment 1 – Setting Up Internet Explorer for Access to OTE
Verifying the installation and setting up the Microsoft Internet Explorer SP2 browser
for the OTE application
The instructions below ensure the correct cooperation between the browser and the OTE
application of the portal server.
Important:
The MS IE6 browser and 7 are cable of communicating with the OTE Web server using the
https protocol only at the level of High Encryption 128bit.
Verification:
In the top menu in the Microsoft Internet Explorer window click on Help
and select About Internet Explorer. The About Internet Explorer window must show the
following:
Version: 6.0..or 7.0.
Cipher Strength: 128-bit ...
Update Versions; SP2 (IE6.0)
Version: I
28.11.2008
Page 13 / 30
In the window... -Microsoft Internet Explorer
click on the top Tools menu and select Internet Options…
*In the Internet Options window before establishing a connection to the OTE server for the first time
Chose
Tab
---------
on the tab’s card
------------------------
perform the following actions
---------------------------
General
Temporary Internet Files
click on the Delete Files
button... and in the
Files window chose
Delete
[x] Delete all offline content
Version: I
28.11.2008
Page 14 / 30
and click OK
click on the Settings button...,
in the Settings window select
[x] Every visit to the page
and click OK
clicking on the
Accessibility button..., in the lower
corner of the
Internet Options window
in the Accessibility window keep all
options turned off and click OK
Version: I
28.11.2008
Page 15 / 30
Chose
Tab
---------
Security
on the tab’s card
------------------------
Select content zone
perform the following actions
---------------------------
highlight Internet
Security level for this zone
should be set up based on
Version: I
28.11.2008
Page 16 / 30
the local security policies then
click OK
Content
Certificates
click on Certificates...,
Choose Trusted Root
Certification Authorities and
check the existence
Version: I
28.11.2008
Page 17 / 30
Connection
Issued to
OTECA
Issued By
OTECA
Local network settings
click on
Local network settings...,
in the Local network settings tab
(LAN)
select the options based on the
local security policy
OK
Version: I
28.11.2008
Page 18 / 30
7
Attachment 2 – SUN Java installation and configuration
•
If it is necessary to use both of Java applications (MS and Sun), than you have to
switch between them. It is not possible to switch on both at the same time. Only one of
them can be used.
•
If is necessary to uninstall MS Java application (Microsoft VM) from the clients
station than do the following steps, chapter 7.1. The uninstallation of Microsoft VM
can be done only by administrator!
7.1 How to uninstall MS Java application
The uninstallation of Microcost VM application (MS Java) from clients station does just
the administrator. Do the following steps:
1. First it is necessary to deactivate Microsoft VM in the IE settings - Settings – Internet
Settings – Advanced. There you can find Microsoft VM item. Deactivate all its nested
items.
Version: I
28.11.2008
Page 19 / 30
2. Download following files from OTE web page http://www.ote-cr.cz/the-participants/a/filesinstallation-procedure-sun-java/ – MS_JAVA_Uninstall.bat a MS
JAVA_Uninstall_2.bat. Store those files in the root directory on your HD, e.g. c:\
drive
3. Run MS_JAVA_Uninstall.bat file from a root directory (c drive)
4. Microsoft_VM_uninstall will be open. Please click on„Yes“ button.
5. If needed restart your workstation in order to complete the removal of Microsoft VM.
6. After restart of the workstation run MS_JAVA_Uninstall_2.bat file.
7. The Microsoft VM (MS Java) is removed from your workstation now. If this
procedure has not completed successfully please follow instructions, which can be
found in appendix A (just in case that automated uninstall failed and Microsoft VM is
still on your workstation).
7.2 Verification and configuration of workstation on Sun Java
In order to verify existence of SUN Java on your workstation do following. Open Control Panel
window (main menu„Start -> Control Panel). Click on Java icon in order to open “Java Control
Panel”. Click on the About button. About Java window shows a current Java version. If you will not
find Java icon in the ControlPanel window then Java has not been installed on your workstation yet.
Important: If you have Sun Java on your computer, i tis necessary to do following steps:
1. Do you have version J2SE(TM) Runtime Environment 5.0 Update 6 (version 1.5.0_06)? If
yes, it is not necessary to download and install this program. Continue with configuration of
IE, chapter 7.4.
2. Do you have higher version of Sun Java than in the point 1? If yes, it is not necessary to
download and install this program. Continue with configuration of IE, chapter 7.4
Version: I
28.11.2008
Page 20 / 30
3. Do you have lower version of Sun Java than in the point 1? If yes, it is necessary to continue
with downloading and installing Sun Java, chapter 7.2.
It is always necessary to install correct certificate for the right functioning of the application
WEBSIOM, chapter 7.6.
7.3 Sun Java Installation instructions
Because of switching from MS Java to Sun Java some applications which need MS Java can work
improperly. If there is situation both of Java applications are needed it is necessary to solve this with
administrator. The following steps don’t solve problems of using both Java applications together.
If you want to uninstall Microsoft VM application (MS Java) from the clients station and to use just
Sun Java application, uninstall Microsoft VM before you begin with installation of Sun Java.
Uninstallation of Microsoft VM describes chapter 7.1
Description of installation of Sun Java follows.
First it is necessary to download Java Sun installation package:
1. Open Internet Explorer a use the address to open the website: https://cds.sun.com/isbin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US//USD/ViewProductDetail-Start?ProductRef=jre-1.5.0_06-oth-JPR@CDSCDS_Developer.
2. If the security window s in the picture appears, it’s necessary to click on the “Yes”
button:
3. After this the website J2SE(TM) Runtime Environment 5.0 Update 6 opens.
4. On this site it’s necessary to choose Platform - Windows, set up Language on Multilanguage, choose I agree… and click on the Continue button.
5. The new website Download J2SE(TM) Runtime Environment 5.0 Update 6 for
Windows, Multi-language is shown (If the security window appears again, click on the
Yes button).
6. On this website it’s necessary to choose Windows Offline Installation in the part called
Required Files, it means to click on the shortcut jre-1_5_0_06-windows-i586-p.exe by
Version: I
28.11.2008
Page 21 / 30
using the left button of the mouse. (in the end of row you can see size of the file 16,00
MB).
7. After clicking on the shortcut the window for downloading the install file is shown. It’s
necessary to click on the “Run” button:
8. In the dialog window you can see the downloading process:
Installation of Sun Java:
9. After downloading the Java installation file the window for installation is shown. It’s
necessary to click on the “Run” button:
10. After a while the installation begins automatically and a License agreement window is
shown. It’s necessary to choose “Typical setup…” and than click on the “Accept” button
Version: I
28.11.2008
Page 22 / 30
11. Than the installation process window appears. For finishing the process it’s necessary to
click on the „Finish“ button
12. When the installation is finished the requirement of restarting the system can
appears. If yes, click on the „Yes“ button to restart the computer.
13. The installation is typically done into the system drive (usually C:\, in the next
text is termed like system_drive) into directory Program Files\Java\jre1.5.0_06
(in the next text just Java_dir).
Version: I
28.11.2008
Page 23 / 30
7.4 Internet browser settings
After restarting machine and logging into the system run Internet Explorer browser and do the
following steps:
•
Through menu „Tools“ choose „Internet options“. The following window appears
•
In this window choose “Advanced” and find item „Java (Sun)“.
Version: I
28.11.2008
Page 24 / 30
•
Nested item „Use Java 2 v 1.5.0_06 for <applet> (requires restart)“ has to be chosen, it
not, choose it. If „Microsoft VM“ items are chosen, unclick all of them. After that use the
„Use“ button and than click on the „OK“ button
•
Close all windows of the Internet Explorer application.
7.5 Sun Java settings
For the right working of Sun Java application it is necessary to change some settings of this
environment. Do following steps:
•
Open Java Control Panel through menu „Start -> Control Panel -> Java“ and switch to the
Advanced folder:
Version: I
28.11.2008
Page 25 / 30
•
Open the Debugging group and make sure, that none of the items of this group is chosen. If
yes, deactivate it.
•
Open the Java console group and check, that the Hide console is chosen. If not,
choose it.
Version: I
28.11.2008
Page 26 / 30
•
Open the Security group and check, that all of items are chosen except one: Use TLS 1.0.
This one must be deactivated.
7.6 Installation of certificate and others security settings
For the right functioning of the new applets the certificate OTECA installation is needed. You can
download it from the OTE website. This certificate must be stored in the directory of trustable
authority of the Java Runtime Environment, which you have installed in chapter. Do the following
steps:
Version: I
28.11.2008
Page 27 / 30
1. From the OTE website (http://www.ote-cr.cz/the-participants/a/installation-procedurelogicacmg/installation-procedure-logicacmg/?set_language=en) download the OTECA
certificate - „The OTECA authority certificate (DER format)“ and save it into the root
directory on system drive (usually c:\) - After clicking on the certificate the window for
saving appears. Click on the „Save“ button and save the certificate into the root directory
of the system drive.
2. Download following file from OTE web page http://www.ote-cr.cz/the-participants/a/filesinstallation-procedure-sun-java/ – Certificate_Import.bat. Store the file in the root
directory on your HD, e.g. c:\ drive
3. Run Certificate_Import.bat file from a root directory (c:\ drive). The certificate
is successfully installed on your workstation now.
4. If this procedure has not completed successfully please follow instructions, which
can be found in appendix B (just in case that automated install failed ).
7.7 Setup of rights
1. Download following file from OTE web page http://www.ote-cr.cz/the-participants/a/filesinstallation-procedure-sun-java/ – .java.policy.
2. Store the file in the following directory:
„C:\Documents and Settings\user_name“, where „user_name“ means folder of a
current user (the user who is going to use IS OTE system).
The Internet Explorer is ready for the first launch of WEBSIOM applications with SUN Java
applets (1.5.0_06) .
Version: I
28.11.2008
Page 28 / 30
8 Attachment 3 – Registration of file extensions for import/export of data in the OTE
application
Extension registration for import/export of data offers and bilateral agreements
W2kpro Settings for OTE:
----------------------------------------------------------In the system it is necessary to relate 'NAB' a 'DVS' file extensions with the file type
'Application Data Control', and for the 'open' action to specify that the program to be
used is C:\WINNT\NOTEPAD.EXE.
* On the desk top double-click My Computer
* In the My Computer window in the menu select Tools \ Folder Options...
Extension NAB
* In the Folder Options window select the File Type tab and under the list
Registered File Types: Click New
* In the Create New Extension window add Extension: NAB and click on
Advanced
* In the Create New Extension window select Associated File Types: Application Data
Control and click OK
* In the Folder Options click on the File Type tab and select Registered File Types:
row
File
Extension
--------------------------------NAB
Application Data Control
and in the text 'NAB' file extension details click Advanced
* In the Edit Tile Type window keep the Application Data Control in
the window and click on New
* In the New Action window add:
Action: OPEN
Application used to perform actions: [C:\WINNT\]NOTEPAD.EXE
and click on OK
* In the Edit file type
- make sure that the top shows the NOTEPAD.EXE icon on the left of the window
showing
Application File Control and that the Action: list includes an OPEN row
- make sure that when the OPEN action in the Action: list is selected and the
Edit... button in the Application used to perform actions: area includes the following text
[C:\WINNT\]NOTEPAD.EXE
- select the option
[x] Confirm after download
and click OK
Extension DVS
* In the Folder Options window select the File Type tab and under the list
Registered File Types: Click New
* In the Create New Extension window add Extension: DVS and click on
Advanced
* In the Create New Extension window select Associated File Types: Application Data
Version: I
28.11.2008
Page 29 / 30
Control and click OK
* In the Folder Options click on the File Type tab and select Registered File Types:
row
File
Extension
--------------------------------DVS
Application Data Control
and in the text 'DVS' file extension details click Advanced
* In the Edit Tile Type window keep the Application Data Control in
the window and click on New
* In the New Action window add:
Action: OPEN
Application used to perform actions: [C:\WINNT\]NOTEPAD.EXE
and click on OK
* In the Edit file type
- make sure that the top shows the NOTEPAD.EXE icon on the left of the window
showing
Application File Control and that the Action: list includes an OPEN row
- make sure that when the OPEN action in the Action: list is selected and the
Edit... button in the Application used to perform actions: area includes the following text
[C:\WINNT\]NOTEPAD.EXE
- select the option
[x] Confirm after download
and click OK
Version: I
28.11.2008
Page 30 / 30

User Guide

Transcription

Similar documents

Atlantis Energy Systems Inc.

Chancey - George R. Stuart Elementary

Cover

if you`re not first you`re last!

Sound Pads

Certificate of Registration Evans Chemetics LP

WHAT TO PACK FOR YOUR STAY AT UMNGAZI

ISO 9001

Certificate of Registration Glasseal Products Inc.

Certificate of Registration Cosmotronic Inc.