Synthes EX Nail Instrument Sets. Set lists and graphic case

Synthes EX Nail Instrument Sets. Set lists and graphic case

Synthes EX Nail Instrument Sets.
Set lists and graphic case configuration
suggestions.
Adolescent Lateral
Femoral Nail-EX
Lateral Femoral
Nail-EX
Retrograde/
Antegrade Femoral
Nail-EX
Tibia-EX
Table of Contents
Sets
Quick Reference
1
EX Nails Opening Instrument Set
4
ALFN Opening Instrument Set
6
LFN Opening Instrument Set
8
RAFN Opening Instrument Set
10
Tibia Opening Instrument Set
12
Reduction Instrument Sets
14
Reaming Instrument Set
18
ALFN Insertion Instrument Set
20
LFN Insertion Instrument Set
22
RAFN Insertion Instrument Set
24
Tibia Insertion Instrument Set
26
Tibia Insertion Set with Suprapatellar
28
RAFN Instrument Set
32
Graphic Cases
Graphic Cases
34
Auxiliary Bins
Auxiliary Bins
35
Set Configurations
Set Configurations
36
EX Nail Instrument Sets
Synthes
Set Quick Reference
EX Nail Instrument Sets
Height
Full Weight with all
Additionally Available
Instruments (lbs.)
01.116.036
Opening All Complete Set
1.5
01.116.037
Opening ALFN Complete Set
1
5.25
01.116.038
Opening LFN Complete Set
1
6.65
01.116.039
Opening RAFN Complete Set
1
5.61
01.116.040
Opening Tibia Complete Set
1
5.17
01.116.041
Reduction with MIPO Complete Set
1.5
10.82
01.116.042
Reduction Complete Set
1.5
7.63
01.116.043
Reaming Complete Set
1
5.54
01.116.044
Insertion ALFN Complete Set
1.5
9.68
01.116.045
Insertion LFN Complete Set
1.5
10.79
01.116.046
Insertion RAFN Complete Set
1.5
12.00
01.116.047
Insertion Tibia Complete Set
3
11.65
01.116.048
Insertion Tibia with Suprapatellar Complete Set
4
19.85
01.116.049
Locking Complete Set
1.5
11.02
2
Synthes
EX Nail Instrument Sets
10.25
Set Quick Reference
Graphic Cases and Auxiliary Trays
Height
Full Weight with all
Additionally Available
Instruments (lbs.)
60.037.001
Graphic Case, full length, 1 high (empty)
1.5
3.68
60.037.002
Graphic Case, full length, 2 high (empty)
1.5
4.30
60.037.003
Graphic Case, full length, 3 high (empty)
1.5
4.84
60.037.004
Graphic Case, full length, 4 high (empty)
3
5.28
60.116.151
Auxiliary tray, 1 high (empty)
1
2.90
60.116.152
Auxiliary tray, 2 high (empty)
2
5.54
EX Nail Instrument Sets
Synthes
3
EX Nails Opening Instrument Set (01.116.036)
Complete Set
60.116.136
Opening Tray for EX Nails
60.116.156
Label Sheet for All EX Nail Opening
Instrumentation
Instruments
03.010.020
Radiographic Ruler, for Titanium
Cannulated Femoral Nails
03.010.021
Radiographic Ruler, for Titanium
Cannulated Tibial Nails
03.010.028
15.0 mm Cannulated Drill Bit, large quick
coupling, 280 mm
03.010.029
17.0 mm Cannulated Drill Bit, large quick
coupling, 280 mm
03.010.034
13.0 mm Flexible Cannulated Drill Bit, 465 mm
03.010.036
12.0 mm Cannulated Drill Bit, large quick
coupling, 190 mm
03.010.040
12.0 mm Cannulated Awl
03.010.041
14.0 mm Cannulated Awl
03.010.115
3.2 mm Guide Wire, 290 mm, 10 ea.
03.010.500
Silicone Handle, with quick coupling
03.010.501
12.0 mm Protection Sleeve, for Expert Tibia
Nail with quick coupling
03.010.502
13.0 mm Protection Sleeve, for RAFN
Retrograde with quick coupling
03.010.503
13.0 mm Protection Sleeve, for RAFN
Antegrade with quick coupling
03.010.504
13.0 mm Protection Sleeve, for Expert ALFN
with quick coupling
03.010.505
17.0 mm Protection Sleeve, for Expert Lateral
Entry Femoral Nail, with quick coupling
03.010.507
Multi Hole Wire Guide, for Expert Retrograde
Femoral Nail
03.010.508
Multi Hole Wire Guide, for Expert Antegrade
Femoral Nail
03.010.509
Multi Hole Wire Guide, for Expert Adolescent
Lateral Entry Femoral Nail
03.010.510
Multi Hole Wire Guide, for Expert Lateral
Entry Femoral Nail
351.27
13.0 mm Cannulated Drill Bit, 300 mm
357.399
3.2 mm Guide Wire, 400 mm, 10 ea.
4
Synthes
EX Nail Instrument Sets
Additionally Available*
03.010.420
15.0 mm Percutaneous Cannulated Flexible
Drill Bit, large quick coupling, 390 mm
03.037.008
8 mm Cannulated Curved Awl
*Additionally available items are not included in sets
– Tray weight without additionally available items:
10.25 lbs.
– Tray height: 1.5 high
– Graphic Cases are available in 1, 2, 3, and 4 heights.
If tray is to be stored separately, lifting posts
(60.116.170) must be ordered.
– Set does not include Graphic Case, which must be
ordered separately.
Existing Instruments
03.010.020
Radiographic Ruler, for Titanium
Cannulated Femoral Nails
03.010.021
Radiographic Ruler, for Titanium
Cannulated Tibial Nails
03.010.028
15.0 mm Cannulated Drill Bit, large quick
coupling, 280 mm
03.010.029
17.0 mm Cannulated Drill Bit, large quick
coupling, 280 mm
03.010.034
13.0 mm Flexible Cannulated Drill Bit, 465 mm
03.010.036
12.0 mm Cannulated Drill Bit, large quick
coupling, 190 mm
03.010.040
12.0 mm Cannulated Awl
03.010.041
14.0 mm Cannulated Awl
03.010.115
3.2 mm Guide Wire, 290 mm, 10 ea.
351.27
13.0 mm Cannulated Drill Bit, 300 mm
357.399
3.2 mm Guide Wire, 400 mm, 10 ea.
EX Nails Opening Instrument Upgrade Set
(01.116.236)
New Instruments
60.116.136
Opening Tray for EX Nails
60.116.156
Label Sheet for All EX Nail Opening
Instrumentation
03.010.500
Silicone Handle, with quick coupling
03.010.501
12.0 mm Protection Sleeve, for Expert Tibia
Nail with quick coupling
03.010.502
13.0 mm Protection Sleeve, for RAFN
Retrograde with quick coupling
03.010.503
13.0 mm Protection Sleeve, for RAFN
Antegrade with quick coupling
03.010.504
13.0 mm Protection Sleeve, for Expert ALFN
with quick coupling
03.010.505
17.0 mm Protection Sleeve, for Expert Lateral
Entry Femoral Nail, with quick coupling
03.010.507
Multi Hole Wire Guide, for Expert Retrograde
Femoral Nail
03.010.508
Multi Hole Wire Guide, for Expert Antegrade
Femoral Nail
03.010.509
Multi Hole Wire Guide, for Expert Adolescent
Lateral Entry Femoral Nail
03.010.510
Multi Hole Wire Guide, for Expert Lateral
Entry Femoral Nail
EX Nail Instrument Sets
Synthes
5
Adolescent Lateral Femoral Nail-EX Opening Instrument Set (01.116.037)
Complete Set
60.116.137
Opening Tray for ALFN-EX
60.116.157
Label Sheet for ALFN-EX Opening
Instrumentation
Instruments
03.010.020
03.010.023
03.010.041
03.010.500
03.010.504
03.010.509
351.27
357.399
Radiographic Ruler, for Titanium
Cannulated Femoral Nails
Radiographic Canal Width Estimator,
for IM Nails
14.0 mm Cannulated Awl
Silicone Handle, with quick coupling
13 mm Protection Sleeve for ALFN
Multi Hole Wire Guide, for Expert Adolescent
Lateral Entry Femoral Nail
13.0 mm Cannulated Drill Bit, 300 mm
3.2 mm Guide Wire, 400 mm, 10 ea.
Additionally Available*
03.037.008
8 mm Cannulated Curved Awl
*Additionally available items are not included in sets
– Tray weight without additionally available items:
5.25 lbs.
– Tray height: 1 high
– Graphic Cases are available in 1, 2, 3, and 4 heights.
– Set does not include Graphic Case, which must be
ordered separately.
6
Synthes
EX Nail Instrument Sets
Existing Instruments
03.010.020
Radiographic Ruler, for Titanium
Cannulated Femoral Nails
03.010.023
Radiographic Canal Width Estimator,
for IM Nails
03.010.041
14.0 mm Cannulated Awl
351.27
13.0 mm Cannulated Drill Bit, 300 mm
357.399
3.2 mm Guide Wire, 400 mm, 10 ea.
Adolescent Lateral Femoral Nail–EX Opening
Instrument Upgrade Set (01.116.237)
New Instruments
60.116.137
Opening Tray for ALFN-EX
60.116.157
Label Sheet for ALFN-EX Opening
Instrumentation
03.010.500
Silicone Handle, with quick coupling
03.010.504
13 mm Protection Sleeve for ALFN
03.010.509
Multi Hole Wire Guide, for Expert Adolescent
Lateral Entry Femoral Nail
EX Nail Instrument Sets
Synthes
7
Lateral Femoral Nail Recon–EX Opening Instrument Set (01.116.038)
Complete Set
60.116.138
Opening Tray for LFN-EX
60.116.158
Label Sheet for LFN-EX Opening
Instrumentation
Instruments
03.010.020
03.010.023
03.010.028
03.010.029
03.010.041
03.010.500
03.010.505
03.010.510
357.399
Radiographic Ruler, for Titanium
Cannulated Femoral Nails
Radiographic Canal Width Estimator,
for IM Nails
15.0 mm Cannulated Drill Bit, large quick
coupling, 280 mm
17.0 mm Cannulated Drill Bit, large quick
coupling, 280 mm
14.0 mm Cannulated Awl
Silicone Handle, with quick coupling
17 mm Protection Sleeve for LFN
Multi Hole Wire Guide, for Expert Lateral
Entry Femoral Nail
3.2 mm Guide Wire, 400 mm, 10 ea.
Additionally Available*
03.010.420
15 mm Flexible Drill Bit
03.037.008
8 mm Cannulated Curved Awl
*Additionally available items are not included in sets
– Tray weight without additionally available items:
6.65 lbs.
– Tray height: 1 high
– Graphic Cases are available in 1, 2, 3, and 4 heights.
– Set does not include Graphic Case, which must be
ordered separately.
8
Synthes
EX Nail Instrument Sets
Existing Instruments
03.010.020
Radiographic Ruler, for Titanium
Cannulated Femoral Nails
03.010.023
Radiographic Canal Width Estimator,
for IM Nails
03.010.028
15.0 mm Cannulated Drill Bit, large quick
coupling, 280 mm
03.010.029
17.0 mm Cannulated Drill Bit, large quick
coupling, 280 mm
03.010.041
14.0 mm Cannulated Awl
357.399
3.2 mm Guide Wire, 400 mm, 10 ea.
Lateral Femoral Nail Recon–EX Opening Instrument
Upgrade Set (01.116.238)
New Instruments
60.116.138
Opening Tray for LFN-EX
60.116.158
Label Sheet for LFN-EX Opening
Instrumentation
03.010.500
Silicone Handle, with quick coupling
03.010.505
17 mm Protection Sleeve for LFN
03.010.510
Multi Hole Wire Guide, for Expert Lateral
Entry Femoral Nail
EX Nail Instrument Sets
Synthes
9
Retrograde/Antegrade Femoral Nail–EX Opening Instrument Set (01.116.039)
Complete Set
60.116.139
Opening Tray for RAFN-EX
60.116.159
Label Sheet for RAFN – EX Opening
Instrumentation
Instruments
03.010.020
03.010.023
03.010.034
03.010.041
03.010.115
03.010.500
03.010.502
03.010.503
03.010.507
03.010.508
351.27
Radiographic Ruler for Titanium
Cannulated Femoral Nails
Radiographic Canal Width Estimator,
for IM Nails
13.0 mm Flexible Cannulated Drill Bit,
465 mm
14.0 mm Cannulated Awl
3.2 mm Guide Wire, 290 mm, 10 ea.
Silicone Handle, with quick coupling
13.0 mm Protection Sleeve, for RAFN
Retrograde with quick coupling
13.0 mm Protection Sleeve, for RAFN
Antegrade with quick coupling
Multi Hole Wire Guide, for Expert Retrograde
Femoral Nail
Multi Hole Wire Guide, for Expert Antegrade
Femoral Nail
13.0 mm Cannulated Drill Bit, 300 mm
Additionally Available*
03.037.008
8 mm Cannulated Curved Awl
*Additionally available items are not included in sets
– Tray weight without additionally available items:
5.61 lbs.
– Tray height: 1 high
– Graphic Cases are available in 1, 2, 3, and 4 heights.
– Set does not include Graphic Case, which must be
ordered separately.
10
Synthes
EX Nail Instrument Sets
Existing Instruments
03.010.020
Radiographic Ruler for Titanium
Cannulated Femoral Nails
03.010.023
Radiographic Canal Width Estimator,
for IM Nails
03.010.034
13.0 mm Flexible Cannulated Drill Bit,
465 mm
03.010.041
14.0 mm Cannulated Awl
03.010.115
3.2 mm Guide Wire, 290 mm, 10 ea.
351.27
13.0 mm Cannulated Drill Bit, 300 mm
Retrograde/Antegrade Femoral Nail–EX Opening
Instrument Upgrade Set (01.116.239)
New Instruments
60.116.139
Opening Tray for RAFN-EX
60.116.159
Label Sheet for RAFN–EX Opening
Instrumentation
03.010.500
Silicone Handle, with quick coupling
03.010.502
13.0 mm Protection Sleeve, for RAFN
Retrograde with quick coupling
03.010.503
13.0 mm Protection Sleeve, for RAFN
Antegrade with quick coupling
03.010.507
Multi Hole Wire Guide, for Expert Retrograde
Femoral Nail
03.010.508
Multi Hole Wire Guide, for Expert Antegrade
Femoral Nail
EX Nail Instrument Sets
Synthes
11
Tibia–EX Opening Instrument Set (01.116.040)
Complete Set
60.116.140
Opening Tray for Tibia Nail-EX
60.116.160
Label Sheet for Tibia–EX Opening
Instrumentation
Instruments
03.010.021
03.010.036
03.010.040
03.010.115
03.010.500
03.010.501
357.399
Radiographic Ruler for Titanium
Cannulated Tibial Nails
12.0 mm Cannulated Drill Bit, large
quick coupling, 190 mm
12.0 mm Cannulated Awl
3.2 mm Guide Wire, 290 mm, 10 ea.
Silicone Handle, with quick coupling
12.0 mm Protection Sleeve, for Expert Tibia
Nail with quick coupling
3.2 mm Guide Wire, 400 mm, 10 ea.
Additionally Available*
03.037.008
8 mm Cannulated Curved Awl
*Additionally available items are not included in set
– Tray weight without additionally available items:
5.17 lbs.
– Tray height: 1 high
– Graphic Cases are available in 1, 2, 3, and 4 heights.
– Set does not include Graphic Case, which must be
ordered separately.
12
Synthes
EX Nail Instrument Sets
Tibia–EX Opening Instrument Set (01.116.040)
Existing Instruments
03.010.021
Radiographic Ruler for Titanium
Cannulated Tibial Nails
03.010.036
12.0 mm Cannulated Drill Bit, large
quick coupling, 190 mm
03.010.040
12.0 mm Cannulated Awl
03.010.115
3.2 mm Guide Wire, 290 mm, 10 ea.
357.399
3.2 mm Guide Wire, 400 mm, 10 ea.
Tibial Nail-EX Opening Instrument Upgrade Set
(01.116.240)
New Instruments
60.116.140
Opening Tray for Tibia Nail-EX
60.116.160
Label Sheet for Tibia–EX Opening
Instrumentation
03.010.500
Silicone Handle, with quick coupling
03.010.501
12.0 mm Protection Sleeve, for Expert Tibia
Nail with quick coupling
EX Nail Instrument Sets
Synthes
13
Reduction Instrument Set with MIPO (01.116.041)
Complete Set
60.116.141
60.116.162
Instruments
03.010.495
03.010.496
292.655
294.788
310.37
321.16
328.020
328.100
328.120
328.130
328.140
328.150
328.160
328.170
359.212
360.251
390.005
393.10
394.86
398.54
Reduction Tray with MIPO Instrumentation
Label Sheet for Reduction Instrumentation
Intramedullary Reduction Tool, curved,
with quick coupling
T-Handle, cannulated, with quick coupling
1.6 mm Guide Wire, 410 mm,
threaded tip, with trocar, 4 ea.
5.0 mm Self-Drilling Schanz Screw, 80 mm
thread length, 250 mm, 2 ea.
3.5 mm Drill Bit quick coupling, 195 mm
Combination Wrench, 11 mm width
across flats
Reduction Handle, toothed,
for 5.0 mm Threaded Rod, 2 ea.
11.0 mm Protection Sleeve, slotted
5.0 mm-1.6 mm Wire Guide
11.0 mm/5.0 mm Drill Sleeve
Cannulated Tap for 5.0 mm Threaded Rod,
195 mm
Adjusting Nut, for 5.0 mm Threaded Rod,
2 ea.
5.0 mm Threaded Rod, 380 mm,
self-drilling tip, 2 ea.
5.0 mm Cannulated Threaded Rod,
335 mm, blunt tip, 1.6 mm cannulation,
2 ea.
Large F-Tool
7.5 mm Intramedullary Reduction Tool,
460 mm
Large Combination Clamp, 2 ea.
Universal Chuck with T-Handle, 2 ea.
11.0 mm Carbon Fiber Rod, 350 mm
Straight Ball Spike, 337 mm
– Tray weight without additionally available items:
10.82 lbs.
– Tray height: 1.5 high
– Graphic Cases are available in 1, 2, 3, and 4 heights.
If tray is to be stored separately, lifting posts
(60.116.170) must be ordered.
– Set does not include Graphic Case, which must be
ordered separately.
14
Synthes
EX Nail Instrument Sets
Additionally Available*
294.57
5.0 mm Schanz Screw, 250 mm, blunted
trocar point, 2 ea.
328.150
Adjusting Nut, 2 ea.
394.87
11.0 mm Carbon Fiber Rod, 400 mm
398.71
Spiked Disk, 2 ea.
*Additionally available items are not included in sets
Reduction Instrument Set with MIPO (01.116.041)
Existing Instruments
292.655
1.6 mm Guide Wire, 410 mm,
threaded tip, with trocar, 4 ea.
294.788
5.0 mm Self-Drilling Schanz Screw, 80 mm
thread length, 250 mm, 2 ea.
310.37
3.5 mm Drill Bit quick coupling, 195 mm
321.16
Combination Wrench, 11 mm width
across flats
328.020
Reduction Handle, toothed,
for 5.0 mm Threaded Rod, 2 ea.
328.100
11.0 mm Protection Sleeve, slotted
328.120
5.0 mm-1.6 mm Wire Guide
328.130
11.0 mm/5.0 mm Drill Sleeve
328.140
Cannulated Tap for 5.0 mm Threaded Rod,
195 mm
328.150
Adjusting Nut, for 5.0 mm Threaded Rod,
2 ea.
328.160
5.0 mm Threaded Rod, 380 mm,
self-drilling tip, 2 ea.
328.170
5.0 mm Cannulated Threaded Rod,
335 mm, blunt tip, 1.6 mm cannulation,
2 ea.
359.212
Large F-Tool
360.251
7.5 mm Intramedullary Reduction Tool,
460 mm
390.005
Large Combination Clamp, 2 ea.
393.10
Universal Chuck with T-Handle, 2 ea.
394.86
11.0 mm Carbon Fiber Rod, 350 mm
Reduction Instrument Set with MIPO Upgrade Set
(01.116.241)
New Instruments
60.116.141
Reduction Tray with MIPO Instrumentation
60.116.162
Label Sheet for Reduction Instrumentation
03.010.495
Intramedullary Reduction Tool, curved, with
quick coupling
03.010.496
T-Handle, cannulated, with quick coupling
398.54
Straight Ball Spike, 337 mm
EX Nail Instrument Sets
Synthes
15
Reduction Instrument Set (01.116.042)
Complete Set
60.116.142
Reduction Tray
60.116.162
Label Sheet for Reduction Instrumentation
Instruments
03.010.495
03.010.496
294.788
359.212
360.251
393.10
398.54
Intramedullary Reduction Tool, curved,
with quick coupling
T-Handle, cannulated, with quick coupling
5.0 mm Self-Drilling Schanz Screws,
250 mm, 2 ea.
Large F-Tool
7.5 mm IM Reduction Tool
Universal Chuck with T-handle, 2 ea.
Straight Ball Spike, 337 mm length
Additionally Available*
294.57
5.0 mm Self-Drilling Schanz Screws, 250 mm,
2 ea.
398.71
Spiked Disk, 2 ea.
*Additionally available items are not included in sets
– Tray weight without additionally available items:
7.63 lbs.
– Tray height: 1.5 high
– Graphic Cases are available in 1, 2, 3, and 4 heights.
If tray is to be stored separately, lifting posts
(60.116.170) must be ordered.
– Set does not include Graphic Case, which must be
ordered separately.
16
Synthes
EX Nail Instrument Sets
Reduction Instrument Set (01.116.042)
Existing Instruments
294.788
5.0 mm Self-Drilling Schanz Screws,
250 mm, 2 ea.
359.212
Large F-Tool
360.251
7.5 mm IM Reduction Tool
393.10
Universal Chuck with T-handle, 2 ea.
Reduction Instrument Upgrade Set (01.116.242)
New Instruments
60.116.142
Reduction Tray
60.116.162
Label Sheet for Reduction Instrumentation
03.010.495
Intramedullary Reduction Tool, curved,
with quick coupling
03.010.496
T-Handle, cannulated, with quick coupling
398.54
Straight Ball Spike, 337 mm
EX Nail Instrument Sets
Synthes
17
Reaming Instrument Set (01.116.043)
Complete Set
60.116.143
Reaming Tray
60.116.163
Label Sheet for Reaming Instrumentation
690.382.40
Reamer Head Tray, Flexible Reamers for
IM Nails
Instruments
03.010.093
351.05
351.15
351.16J
351.717
351.719
351.783
352.040
352.050
352.055
393.10
Reaming Rod Push Rod, with Ball Handle
Tissue Protector
Flexible Shaft Handle quick coupling,
cannulated
Flexible Shaft Connector, for Jacobs chuck
Depth Gauge
Extension Tube for Depth Gauge
Removal Tool, for use with Medullary
Reaming Heads
5.0 mm Flexible Shaft, 470 mm, 2 ea.
7.0 mm Head, straight
7.0 mm Head, angled
Universal Chuck with T-Handle
– Tray weight without additionally available items:
5.54 lbs.
– Tray height: 1 high
– Graphic Cases are available in 1, 2, 3, and 4 heights.
– Set does not include Graphic Case, which must be
ordered separately.
18
Synthes
EX Nail Instrument Sets
Reaming Instrument Set (01.116.043)
Medullary Reamer Heads
Length (mm)
Length (mm)
352.085
8.5
352.140
14.0
352.090
9.0
352.145
14.5
352.095
9.5
352.150
15.0
352.100
10.0
352.155
15.5
352.105
10.5
352.160
16.0
352.110
11.0
352.165
16.5
352.115
11.5
352.170
17.0
352.120
12.0
352.175
17.5
352.125
12.5
352.180
18.0
352.130
13.0
352.185
18.5
352.135
13.5
352.190
19.0
EX Nail Instrument Sets
Synthes
19
Adolescent Lateral Femoral Nail– EX Insertion Instrument Set (01.116.044)
Complete Set
60.116.144
Insertion Tray, for ALFN-EX
60.116.164
Label Sheet for ALFN–EX Insertion
Instrumentation
Instruments
03.010.060
03.010.063
03.010.064
03.010.069
03.010.075
03.010.076
03.010.077
03.010.079
03.010.103
03.010.146
03.010.228
03.010.483
03.010.488
03.010.493
03.010.517
03.010.523
357.399
3.2 mm Three-Fluted Drill Bit,
330 mm/100 mm calibration, 2 ea.
12.0 mm/8.0 mm Protection Sleeve,
188 mm, 2 ea.
8.0 mm/4.2 mm Drill Sleeve, 200 mm, 2 ea.
3.2 mm Trocar, 2 ea.
11.5 mm/8.5 mm Protection Sleeve for
Recon Locking, 2 ea.
8.5 mm/3.2 mm Wire Guide for Recon
Locking, 2 ea.
3.2 mm Trocar for Recon Locking, 2 ea.
Drill Stop for 4.5 mm/6.5 mm Stepped
Drill Bit
3.2 mm Three-Fluted Drill Bit, quick coupling,
needle point, 145 mm, 2 ea.
Cannulated Connection Screw, for 100 mm
Insertion Handle, 2 ea.
Drill Bit for 5.0 mm Recon Screws, large
quick coupling, 2 ea.
Radiolucent Recon Aiming Arm for ALFN
Radiolucent Insertion Handle, for
ALFN-EX, 100 mm
Direct Measuring Device, for Recon Screws
to 400 mm
T-Handle Ball Hex Screwdriver, 8 mm
Driving Cap, threaded
3.2 mm Guide Wire, 400 mm, 3 ea.
– Tray weight without additionally available items:
9.68 lbs.
– Tray height: 1.5 high
– Graphic Cases are available in 1, 2, 3, and 4 heights.
If tray is to be stored separately, lifting posts
(60.116.170) must be ordered.
– Set does not include Graphic Case, which must be
ordered separately.
20
Synthes
EX Nail Instrument Sets
Additionally Available*
03.010.100
3.2 mm Three-Fluted Drill Bit, needle point,
for use with Radiolucent Drive, 145 mm,
2 ea.
*Additionally available items are not included in sets
Adolescent Lateral Femoral Nail–EX Insertion Instrument Set (01.116.044)
Existing Instruments
03.010.060
3.2 mm Three-Fluted Drill Bit,
330 mm/100 mm calibration, 2 ea.
03.010.063
12.0 mm/ 8.0 mm Protection Sleeve,
188 mm, 2 ea.
03.010.064
8.0 mm / 4.2 mm Drill Sleeve, 200 mm,
2 ea.
03.010.069
3.2 mm Trocar, 2 ea.
03.010.075
11.5 mm / 8.5 mm Protection Sleeve for
Recon Locking, 2 ea.
03.010.076
8.5 mm / 3.2 mm Wire Guide for Recon
Locking, 2 ea.
03.010.077
3.2 mm Trocar for Recon Locking, 2 ea.
03.010.079
Drill Stop for 4.5 mm/ 6.5 mm Stepped
Drill Bit
03.010.103
3.2 mm Three-Fluted Drill Bit, quick
coupling, needle point, 145 mm, 2 ea.
03.010.146
Cannulated Connection Screw for 100 mm
Insertion Handle, 2 ea.
03.010.228
Drill Bit for 5.0 mm Recon Screws, large
quick coupling, 2 ea.
357.399
3.2 mm Guide Wire, 400 mm, 3 ea.
Adolescent Lateral Femoral Nail-EX Insertion
Instrument Upgrade Set (01.116.244)
New Instruments
60.116.144
Insertion Tray, for ALFN-EX
60.116.164
Label Sheet for ALFN-EX Insertion
Instrumentation
03.010.483
Radiolucent Recon Aiming Arm for ALFN
03.010.488
Radiolucent ALFN Insertion Handle, for
ALFN-EX, 100 mm
03.010.493
Direct Measuring Device, for Recon Screws
to 400 mm
03.010.517
T-Handle Ball Hex Screwdriver, 8 mm
03.010.523
Driving Cap, threaded
EX Nail Instrument Sets
Synthes
21
Lateral Femoral Nail Recon – EX Insertion Instrument Set (01.116.045)
Complete Set
60.116.145
Insertion Tray for Lateral Femoral Nail-EX
60.116.165
Label Sheet for LFN-EX insertion
instumentation
Instruments
03.010.061
4.2 mm Three-Fluted Drill Bit, quick coupling,
330 mm, 100 mm calibration, 2 ea.
03.010.062
5.0 mm Three-Fluted Drill Bit, quick
coupling, 330 mm, 100 mm calibration, 2 ea.
03.010.063
12.0 mm/ 8.0 mm Protection Sleeve,
188 mm, 2 ea.
03.010.065
8.0 mm/ 4.2 mm Drill Sleeve, 200 mm, 2 ea.
03.010.066
8.0 mm/5.0 mm Drill Sleeve, 200 mm, 2 ea.
03.010.070
4.2 mm Trocar, 210 mm, 2 ea.
03.010.071
5.0 mm Trocar, 210 mm, 2 ea.
03.010.075
11.5 mm/ 8.5 mm Protection Sleeve,
for Recon Locking, 2 ea.
03.010.076
8.5 mm/3.2 mm Wire Guide, for Recon
Locking, 2 ea.
03.010.077
3.2 mm Trocar for Recon Locking, 2 ea.
03.010.078
4.5 mm / 6.5 mm Stepped Drill Bit, large
quick coupling, 485 mm
03.010.079
Drill Stop for 4.5 mm/6.5 mm Stepped
Drill Bit
03.010.080
Tap for 6.5 mm Recon Screws, 485 mm
03.010.104
4.2 mm Three-Fluted Drill Bit, quick
coupling, needle point, 145 mm, 2 ea.
03.010.105
5.0 mm Three-Fluted Drill Bit, quick
coupling, needle point, 145 mm, 2 ea.
03.010.146
Cannulated Connection Screw for
100 mm Insertion Handle, 2 ea.
03.010.482
Radiolucent Recon Aiming Arm for LFN
03.010.486
Radiolucent Insertion Handle, for Expert
Nails, 100 mm
03.010.493
Direct Measuring Device, for Recon Screws to
400 mm
03.010.517
T-Handle Ball Hex Screwdriver, 8 mm
03.010.523
Driving Cap, threaded
357.399
3.2 mm Guide Wire, 400 mm, 3 ea.
22
Synthes
EX Nail Instrument Sets
Additionally Available*
03.010.101
4.2 mm Three-Fluted Drill Bit, quick
coupling, needle point, 145 mm, 2 ea.
03.010.102
5.0 mm Three-Fluted Drill Bit, quick
coupling, needle point, 145 mm, 2 ea.
03.010.487
Radiolucent Insertion Handle,
Percutaneous
03.010.499
Cannulated Connection Screw for
Percutaneous Insertion Handle, 2 ea.
*Additionally available items are not included in sets
– Tray weight without additionally available items:
10.79 lbs.
– Tray height: 1.5 high
– Graphic Cases are available in 1, 2, 3, and 4 heights.
If tray is to be stored separately, lifting posts
(60.116.170) must be ordered.
– Set does not include Graphic Case, which must be
ordered separately.
Lateral Femoral Nail Recon – EX Insertion Instrument Set (01.116.045)
Existing Instruments
03.010.061
4.2 mm Three-Fluted Drill Bit, quick
coupling, 330 mm, 100 mm calibration, 2 ea.
03.010.062
5.0 mm Three-Fluted Drill Bit, quick coupling,
330 mm, 100 mm calibration, 2 ea.
03.010.063
12.0 mm/8.0 mm Protection Sleeve,
188 mm, 2 ea.
03.010.065
8.0 mm/4.2 mm Drill Sleeve, 200 mm, 2 ea.
03.010.066
8.0 mm/5.0 mm Drill Sleeve, 200 mm, 2 ea.
03.010.070
4.2 mm Trocar, 210 mm, 2 ea.
03.010.071
5.0 mm Trocar, 210 mm, 2 ea.
03.010.075
11.5 mm/ 8.5 mm Protection Sleeve,
for Recon Locking, 2 ea.
03.010.076
8.5 mm/3.2 mm Wire Guide, for Recon
Locking, 2 ea.
03.010.077
3.2 mm Trocar for Recon Locking, 2 ea.
03.010.078
4.5 mm/6.5 mm Stepped Drill Bit, large
quick coupling, 485 mm
03.010.079
Drill Stop for 4.5 mm/6.5 mm Stepped
Drill Bit
03.010.080
Tap for 6.5 mm Recon Screws, 485 mm
03.010.104
4.2 mm Three-Fluted Drill Bit, quick
coupling, needle point, 145 mm, 2 ea.
03.010.105
5.0 mm Three-Fluted Drill Bit, quick
coupling, needle point, 145 mm, 2 ea.
03.010.146
Cannulated Connection Screw for 100 mm
Insertion Handle, 2 ea.
357.399
3.2 mm Guide Wire, 400 mm, 3 ea.
Lateral Femoral Nail Recon – EX Insertion Instrument
Upgrade Set (01.116.245)
New Instruments
60.116.145
Insertion Tray for Lateral Femoral Nail-EX
60.116.165
Label Sheet for LFN-EX insertion
instumentation
03.010.482
Radiolucent Recon Aiming Arm for LFN
03.010.486
Radiolucent Insertion Handle, for Expert
Nails, 100 mm
03.010.493
Direct Measuring Device, for Recon Screws to
400 mm
03.010.517
T-Handle Ball Hex Screwdriver, 8 mm
03.010.523
Driving Cap, threaded
EX Nail Instrument Sets
Synthes
23
Retrograde/Antegrade Femoral Nail-EX Insertion Instrument Set (01.116.046)
Complete Set
60.116.146
Insertion Tray for Retrograde/Antegrade
Femoral Nail-EX
60.116.166
Label Sheet for RAFN–EX Insertion
Instrumentation
Instruments
03.010.061
03.010.062
03.010.063
03.010.065
03.010.066
03.010.070
03.010.071
03.010.081
03.010.082
03.010.084
03.010.104
03.010.105
03.010.115
03.010.146
03.010.480
03.010.481
03.010.486
03.010.489
03.010.492
24
Synthes
4.2 mm Three-Fluted Drill Bit, quick coupling,
330 mm, 100 mm calibration, 2 ea.
5.0 mm Three-Fluted Drill Bit, quick
coupling, 330 mm, 100 mm calibration, 2 ea.
12.0 mm/8.0 mm Protection Sleeve, 188 mm,
2 ea.
8.0 mm/4.2 mm Drill Sleeve, 200 mm, 2 ea.
8.0 mm/5.0 mm Drill Sleeve, 200 mm, 2 ea.
4.2 mm Trocar, 210 mm, 2 ea.
5.0 mm Trocar, 210 mm, 2 ea.
15.0 mm/13.0 mm Protection Sleeve for
Spiral Blade Aiming Arm
13.0 mm/3.2 mm Wire Guide for Spiral
Blade Aiming Arm
Spiral Blade Inserter, for Retrograde
Femoral Nails–EX
4.2 mm Three-Fluted Drill Bit, quick
coupling, needle point, 145 mm, 2 ea.
5.0 mm Three-Fluted Drill Bit, quick coupling,
needle point, 145 mm, 2 ea.
3.2 mm Guide Wire, 290 mm, 3 ea.
Cannulated Connection Screw for 100 mm
Insertion Handle, 2 ea.
Radiolucent Aiming Arm for RAFN Antegrade
Standard Locking
Radiolucent Aiming Arm for RAFN Retrograde
Standard Locking
Radiolucent Insertion Handle, for expert nails,
100 mm
Aiming Arm, for Retrograde Spiral Blade
Locking
Spiral Blade Measuring Device, for Retrograde
Femoral Nail–EX
EX Nail Instrument Sets
03.010.517
03.010.523
357.34
T-Handle Ball Hex Screwdriver, 8 mm
Driving Cap, threaded
Connecting Screw, for Titanium Spiral Blades
357.36
Extraction Screw
Additionally Available*
03.010.101
4.2 mm Three-Fluted Drill Bit, quick
coupling, needle point, 145 mm, 2 ea.
03.010.102
5.0 mm Three-Fluted Drill Bit, quick
coupling, needle point, 145 mm, 2 ea.
03.010.487
Radiolucent Insertion Handle, Percutaneous
03.010.499
Cannulated Connection Screw for
Percutaneous Insertion Handle, 2 ea.
*Additionally available items are not included in sets
– Tray weight without additionally available items:
12 lbs.
– Tray height: 1.5 high
– Graphic Cases are available in 1, 2, 3, and 4 heights.
If tray is to be stored separately, lifting posts
(60.116.170) must be ordered.
– Set does not include Graphic Case, which must be
ordered separately.
Retrograde/Antegrade Femoral Nail-EX Insertion Instrument Set (01.116.046)
Existing Instruments
03.010.061
4.2 mm Three-Fluted Drill Bit, quick
coupling, 330 mm, 100 mm calibration,
2 ea.
03.010.062
5.0 mm Three-Fluted Drill Bit, quick
coupling, 330 mm, 100 mm calibration,
2 ea.
03.010.063
12.0 mm/8.0 mm Protection Sleeve,
188 mm, 2 ea.
03.010.065
8.0 mm/4.2 mm Drill Sleeve, 200 mm, 2 ea.
03.010.066
8.0 mm/5.0 mm Drill Sleeve, 200 mm, 2 ea.
03.010.070
4.2 mm Trocar, 210 mm, 2 ea.
03.010.071
5.0 mm Trocar, 210 mm, 2 ea.
03.010.081
15.0 mm / 13.0 mm Protection Sleeve for
Spiral Blade Aiming Arm
03.010.082
13.0 mm / 3.2 mm Wire Guide for Spiral
Blade Aiming Arm
03.010.084
Spiral Blade Inserter for Retrograde
Femoral Nails – EX
03.010.104
4.2 mm Three-Fluted Drill Bit, quick
coupling, needle point, 145 mm, 2 ea.
03.010.105
5.0 mm Three-Fluted Drill Bit, quick
coupling, needle point, 145 mm, 2 ea.
03.010.115
3.2 mm Guide Wire, 290 mm, 3 ea.
03.010.146
Cannulated Connection Screw for
100 mm Insertion Handle, 2 ea.
357.34
Connecting Screw for Inserter for
Titanium Spiral Blades
357.36
Extraction Screw
Retrograde/Antegrade Femoral Nail-EX Insertion
Instrument Upgrade Set (01.116.246)
New Instruments
60.116.146
Insertion Tray for Retrograde/Antegrade
Femoral Nail-EX
60.116.166
Label Sheet for RAFN–EX Insertion
Instrumentation
03.010.480
Radiolucent Aiming Arm for RAFN Antegrade
Standard Locking
Radiolucent Aiming Arm for RAFN Retrograde
03.010.481
Standard Locking
03.010.486
Radiolucent Insertion Handle, for expert nails,
100 mm
03.010.489
Aiming Arm, for Retrograde Spiral Blade
Locking
03.010.492
Spiral Blade Measuring Device, for
Retrograde Femoral Nail– EX
03.010.517
T-Handle Ball Hex Screwdriver, 8 mm
03.010.523
Driving Cap, threaded
EX Nail Instrument Sets
Synthes
25
Tibia –EX Insertion Instrument Set (01.116.047)
Complete Set
60.116.147
Insertion Tray for Tibia Nail–EX
60.116.167
Label Sheet for Tibia–EX Insertion
Instrumentation
Instruments
03.010.052
03.010.060
03.010.061
03.010.063
03.010.064
03.010.065
03.010.069
03.010.070
03.010.103
03.010.104
03.010.137
03.010.146
03.010.486
03.010.517
03.010.523
Aiming Arm for EX Tibial Nails
3.2 mm Three-Fluted Drill Bit, quick coupling,
330 mm, 100 mm calibration, 2 ea.
4.2 mm Three-Fluted Drill Bit, quick coupling,
330 mm, 100 mm calibration, 2 ea.
12.0 mm, 8.0 mm Protection Sleeve,
188 mm, 2 ea.
8.0 mm, 3.2 mm Drill Sleeve, 200 mm, 2 ea.
8.0 mm, 4.2 mm Drill Sleeve, 200 mm, 2 ea.
3.2 mm Trocar, 2 ea.
4.2 mm Trocar, 210 mm, 2 ea.
3.2 mm Three-Fluted Drill Bit, quick coupling,
needle point, 145 mm, 2 ea.
4.2 mm Three-Fluted Drill Bit, quick coupling,
needle point, 145 mm, 2 ea.
Long Compression Device
Cannulated Connection Screw for 100 mm
Insertion Handle, 2 ea.
Radiolucent Insertion Handle, for expert nails,
100 mm
T-Handle Ball Hex Screwdriver, 8 mm
Driving Cap, threaded
Additionally Available*
03.010.004
Compression Device for Titanium Cannulated
Tibial Nails –EX, 2 ea.
03.010.095
Cannulated Connection Screw for Short
Insertion Handle, 2 ea.
03.010.100
3.2 mm Radiolucent Drill Bit, 2 ea.
03.010.101
4.2 mm Three-Fluted Drill Bit, quick coupling,
needle point,145 mm, 2 ea.
03.010.137
Long Compression Device
03.010.485
Radiolucent Short Insertion Handle, 23 mm
*Additionally available items are not included in sets
26
Synthes
EX Nail Instrument Sets
– Tray weight without additionally available items:
11.65 lbs.
– Tray height: 3 high
– Graphic Cases are available in 1, 2, 3, and 4 heights.
– Set does not include Graphic Case, which must be
ordered separately.
Tibia –EX Insertion Instrument Set (01.116.047)
Existing Instruments
03.010.052
Aiming Arm for EX Tibial Nails
03.010.060
3.2 mm Three-Fluted Drill Bit, quick coupling,
330 mm, 100 mm calibration, 2 ea.
03.010.061
4.2 mm Three-Fluted Drill Bit, quick coupling,
330 mm, 100 mm calibration, 2 ea.
03.010.063
12.0 mm, 8.0 mm Protection Sleeve, 188 mm,
2 ea.
03.010.064
8.0 mm, 3.2 mm Drill Sleeve, 200 mm, 2 ea.
03.010.065
8.0 mm, 4.2 mm Drill Sleeve, 200 mm, 2 ea.
03.010.069
3.2 mm Trocar, 2 ea.
03.010.070
4.2 mm Trocar, 210 mm, 2 ea.
03.010.103
3.2 mm Three-Fluted Drill Bit, quick coupling,
needle point, 145 mm, 2 ea.
03.010.104
4.2 mm Three-Fluted Drill Bit, quick coupling,
needle point, 145 mm, 2 ea.
03.010.137
Long Compression Device
03.010.146
Cannulated Connection Screw for 100 mm
Insertion Handle, 2 ea.
Tibia–EX Insertion Instrument Upgrade Set (01.116.247)
New Instruments
60.116.147
Insertion Tibia Tray
60.116.167
Label Sheet for Tibia –EX Insertion
Instrumentation
03.010.486
Radiolucent Insertion Handle, for expert nails,
100 mm
03.010.517
T-Handle Ball Hex Screwdriver, 8 mm
03.010.523
Driving Cap, threaded
EX Nail Instrument Sets
Synthes
27
Tibia– EX Insertion Instrument Set with Suprapatellar (01.116.048)
Complete Set
60.116.148
Insertion Tray for Tibia Nail-EX with
Suprapatellar Instruments
60.116.168
Label Sheet for Tibia Nail-EX with
Suprapatellar Insertion Instrumentation
Instruments
03.010.060
03.010.061
03.010.063
03.010.064
03.010.065
03.010.069
03.010.070
03.010.103
03.010.104
03.010.137
03.010.146
03.010.404
03.010.430
03.010.433
03.010.434
03.010.435
03.010.436
03.010.439
03.010.440
03.010.441
03.010.442
28
Synthes
3.2 mm Three-Fluted Drill Bit, quick
coupling, 330 mm, 100 mm calibration, 2 ea.
4.2 mm Three-Fluted Drill Bit, quick
coupling, 330 mm, 100 mm calibration, 2 ea.
12.0 mm/8.0 mm Protection Sleeve,
188 mm, 2 ea.
8.0 mm/3.2 mm Drill Sleeve, 200 mm, 2 ea.
8.0 mm/4.2 mm Drill Sleeve, 200 mm, 2 ea.
3.2 mm Trocar, 2 ea.
4.2 mm Trocar, 210 mm, 2 ea.
3.2 mm Three-Fluted Drill Bit, quick
coupling, needle point, 145 mm, 2 ea.
4.2 mm Three-Fluted Drill Bit, quick
coupling, needle point, 145 mm, 2 ea.
Long Compression Device, for Titanium
Cannulated Tibial Nails-EX
Cannulated Connection Screw, for 100 mm
Insertion Handle, 2 ea.
Cannulated Connecting Screw, for
Percutaneous Instruments for Nails-EX
Handle for Protection Sleeves, for
Suprapatellar
12.0 mm/3.2 mm Wire Guide, 2 holes,
for Suprapatellar
14.5 mm/3.2 mm Wire Guide, 2 holes,
for Suprapatellar
12.0 mm Protection Sleeve, for
8–11 mm nails
14.5 mm Protection Sleeve, for
12–13 mm nails
12 mm Cannulated Drill, 270 mm, with
large quick coupling
Insertion Handle for Suprapatellar
Aiming Arm for EX Tibia Nails
12.0 mm/8.0 mm Protection Sleeve with
flats for Suprapatellar
EX Nail Instrument Sets
03.010.443
03.010.444
03.010.445
03.010.446
03.010.447
03.010.455
03.010.456
03.010.475
03.010.486
03.010.517
03.010.523
Compression Device for Suprapatellar
8 mm Hex Screwdriver Cannulated,
Inter-Lock
T40 StarDrive Screwdriver, long, Inter-Lock
Extraction Screw, M8, for Suprapatellar
T40 StarDrive Screwdriver, long,
cannulated
12.0 mm Trocar, PEEK, for Suprapatellar
14.5 mm Trocar, PEEK, for Suprapatellar
Driving Cap
Radiolucent Insertion Handle, for expert nails,
100 mm
T-Handle Ball Hex Screwdriver, 8 mm
Driving Cap, threaded
Additionally Available*
03.010.004
Compression Device for Titanium
Cannulated Tibial Nails–EX, 2 ea.
03.010.095
Cannulated Connection Screw for
Short Insertion Handle, 2 ea.
03.010.100
3.2 mm Radiolucent Drill Bit, 2 ea.
03.010.101
4.2 mm Three-Fluted Drill Bit, quick
coupling, needle point, 145 mm, 2 ea.
03.010.137
Compression Device for Titanium
Cannulated Tibial Nails–EX
03.010.485
Radiolucent Short Insertion Handle, 23 mm
*Additionally available items are not included in sets
Tibia–EX Insertion Instrument Set with Suprapatellar (01.116.048)
– Tray weight without additionally available items:
19.68 lbs.
– Tray height: 4 high
– Graphic Cases are available in 1, 2, 3, and 4 heights.
– Set does not include Graphic Case, which must be
ordered separately.
EX Nail Instrument Sets
Synthes
29
Tibia –EX Insertion Instrument Set with Suprapatellar (01.116.048)
Existing Instruments
03.010.060
3.2 mm Three-Fluted Drill Bit, quick
coupling, 330 mm, 100 mm calibration,
2 ea.
03.010.061
4.2 mm Three-Fluted Drill Bit, quick
coupling, 330 mm, 100 mm calibration, 2 ea.
03.010.063
12.0 mm/ 8.0 mm Protection Sleeve,
188 mm, 2 ea.
03.010.064
8.0 mm/ 3.2 mm Drill Sleeve, 200 mm, 2 ea.
03.010.065
8.0 mm/ 4.2 mm Drill Sleeve, 200 mm, 2 ea.
03.010.069
3.2 mm Trocar, 2 ea.
03.010.070
4.2 mm Trocar, 210 mm, 2 ea.
03.010.103
3.2 mm Three-Fluted Drill Bit, quick coupling,
needle point, 145 mm, 2 ea.
03.010.104
4.2 mm Three-Fluted Drill Bit, quick coupling,
needle point, 145 mm, 2 ea.
03.010.137
Long Compression Device, for Titanium
Cannulated Tibial Nails – EX
03.010.146
Cannulated Connection Screw, for 100 mm
Insertion Handle, 2 ea.
03.010.404
Cannulated Connecting Screw, for
Percutaneous Instruments for Nails–EX
03.010.430
Handle for Protection Sleeves, for
Suprapatellar
03.010.433
12.0 mm / 3.2 mm Wire Guide, 2 holes,
for Suprapatellar
03.010.434
14.5 mm / 3.2 mm Wire Guide, 2 holes,
for Suprapatellar
30
Synthes
EX Nail Instrument Sets
03.010.435
03.010.436
03.010.439
03.010.440
03.010.441
03.010.442
03.010.443
03.010.444
03.010.445
03.010.446
03.010.447
03.010.455
03.010.456
03.010.475
12.0 mm Protection Sleeve,
for 8 –11 mm nails
14.5 mm Protection Sleeve,
for 12 –13 mm nails
12 mm Cannulated Drill, 270 mm,
with large quick coupling
Insertion Handle for Suprapatellar
Aiming Arm for EX Tibia Nails
12.0 mm / 8.0 mm Protection Sleeve with
flats for Suprapatellar
Compression Device for Suprapatellar
8 mm Hex Screwdriver Cannulated,
Inter-Lock
T40 StarDrive Screwdriver, long, Inter-Lock
Extraction Screw, M8, for Suprapatellar
T40 StarDrive Screwdriver, long,
cannulated
12.0 mm Trocar, PEEK, for Suprapatellar
14.5 mm Trocar, PEEK, for Suprapatellar
Driving Cap
Tibia–EX Insertion Instrument Set with Suprapatellar (01.116.048)
Existing Instruments
Tibia–EX Insertion Instrument Upgrade Set with
Suprapatellar (01.116.248)
New Instruments
60.116.148
Insertion Tray for Tibia Nail-EX with
Suprapatellar Instruments
60.116.168
Label Sheet for Tibia Nail-EX with
Suprapatellar Insertion Instrumentation
03.010.486
Radiolucent Insertion Handle, for expert nails,
100 mm
03.010.517
T-Handle Ball Hex Screwdriver, 8 mm
03.010.523
Driving Cap, threaded
EX Nail Instrument Sets
Synthes
31
EX Nails Locking Instrument Set (01.116.049)
Complete Set
60.116.149
Locking Tray for EX Nails
60.116.169
Label Sheet for All EX–Nail Locking
Instrumentation
Instruments
03.010.151
03.010.152
03.010.170
03.010.428
03.010.429
03.010.491
03.010.494
03.010.513
03.010.516
03.010.518
03.010.519
03.010.520
03.010.522
03.900.044
321.17
321.20
357.133
357.398
Star/HexDrive Screwdriver Shaft T25, 3.5 mm
Hexagonal, self-retaining, quick coupling,
165 mm
Star/HexDrive Screwdriver Shaft T25, 3.5 mm
Hexagonal, self-retaining, quick coupling,
280 mm
Hammer Guide
Depth Gauge for Locking Screws to 100 mm,
for intermedullary nails
Direct Measuring Device for Locking Screws
to 100 mm, for intermedullary nails
Long Scalpel Handle
Depth Gauge, for Locking Screws to 100 mm
Screwdriver, self retaining, T25, 250 mm
Handle, large, with quick coupling
Screwdriver, self retaining, T25, 320 mm
Screwdriver, self retaining, T25, 440 mm
Screwdriver, T40, 277 mm
Spiral Combination Hammer, 500 grams
T40 StarDrive Screwdriver Shaft, 100 mm
4.5 mm Pin Wrench, 120 mm, 2 ea.
Ratchet Wrench, 11 mm width across flats
Extraction Screw, for Titanium Femoral and
Tibial Nails
Cannulated Shaft with 8 mm hex, 125 mm
– Tray weight without additionally available items:
11.02 lbs.
– Tray height: 1.5 high
– Graphic Cases are available in 1, 2, 3, and 4 heights.
If tray is to be stored separately, lifting posts
(60.116.170) must be ordered.
– Set does not include Graphic Case, which must be
ordered separately.
32
Synthes
EX Nail Instrument Sets
Additionally Available*
03.010.151
Star/Hex Screwdriver Shaft, 165 mm
03.010.152
Star/Hex Screwdriver Shaft, 280 mm
03.010.072
Depth Gauge for Locking Screws to
100 mm, for IM Nails
03.010.106
Direct Measuring Device, for Locking
Screws to 100 mm
03.010.472
Inter-lock Screwdriver, T25 StarDrive/3.5 mm
Hexagonal, 330 mm
03.010.473
Inter-lock Screwdriver, T25 StarDrive/3.5 mm
Hexagonal, 224 mm
03.010.515
Screwdriver, Inter-Lock, T40, 377 mm
03.900.044
T40 StarDrive Screwdriver Shaft
*Additionally available items are not included in sets
EX Nails Locking Instrument Set (01.116.049)
Existing Instruments
03.010.151
Star/HexDrive Screwdriver Shaft T25, 3.5 mm
Hexagonal, self-retaining, quick coupling,
165 mm
03.010.152
Star/HexDrive Screwdriver Shaft T25, 3.5 mm
Hexagonal, self-retaining, quick coupling,
280 mm
03.900.044
T40 StarDrive Screwdriver Shaft, 100 mm
321.17
4.5 mm Pin Wrench, 120 mm, 2 ea.
321.20
Ratchet Wrench, 11 mm width across flats
357.133
Extraction Screw, for Titanium Femoral and
Tibial Nails
357.398
Cannulated Shaft with 8 mm hex, 125 mm
EX Nails Locking Instrument Upgrade Set (01.116.249)
New Instruments
60.116.149
Locking Tray for EX Nails
60.116.169
Label Sheet for All EX–Nail Locking
Instrumentation
03.010.170
Hammer Guide
03.010.428
Depth Gauge for Locking Screws to 100 mm,
for intermedullary nails
03.010.429
Direct Measuring Device for Locking Screws
to 100 mm, for intermedullary nails
03.010.491
Long Scalpel Handle
03.010.494
Depth Gauge, for Locking Screws to 100 mm
03.010.513
Screwdriver, self retaining, T25, 250 mm
03.010.516
Handle, large, with quick coupling
03.010.518
Screwdriver, self retaining, T25, 320 mm
03.010.519
Screwdriver, self retaining, T25, 440 mm
03.010.520
Screwdriver, T40, 277 mm
03.010.522
Spiral Combination Hammer, 500 grams
EX Nail Instrument Sets
Synthes
33
Graphic Cases
60.037.001
Graphic Case, full length, 1 high
Weight empty: 3.68 lbs.
60.037.002
Graphic Case, full length, 2 high
Weight empty: 4.3 lbs.
60.037.003
Graphic Case, full length, 3 high
Weight empty: 4.84 lbs.
60.037.004
Graphic Case, full length, 4 high
Weight empty: 5.28 lbs.
Some graphic case trays are available in 1 and
1.5 heights.
If stacked together, totaling an odd level, lifting posts
should be added to the graphic case.
Example: 1 high tray + 1.5 high tray + lifting posts =
3 high graphic case
60.116.170
34
Synthes
Lifting Posts, 8 pack
Weight of 8 lifting posts: 0.24 lbs.
EX Nail Instrument Sets
Auxiliary Trays
Auxiliary Trays
60.116.151
Auxiliary Tray, full length, 1 high
Weight with finger mat only: 2.9 lbs.
60.116.173
Auxiliary Tray Divider, 1 high, 6 pack
60.116.174
Auxiliary Tray Divider, 1 high, 12 pack
60.116.152
Auxiliary Tray, full length, 2 high
Weight with finger mat only: 3.7 lbs.
60.116.183
Auxiliary Tray Divider, 2 high, 6 pack
60.116.184
Auxiliary Tray Divider, 2 high, 12 pack
690.917
Finger Mat
60.116.169
Label Sheet for All EX Nail Instruments
60.116.085
Blank Label Sheet
EX Nail Instrument Sets
Synthes
35
Set Configuration Suggestions
ALFN Set
Total Weight: 20.01 lbs. (Case 1)
15.56 lbs. (Case 2)
Opening Instrumentation for ALFN
1 High
(01.116.037 Complete Set or
01.116.237 Upgrade Set)
Insertion Instrumentation for ALFN
1.5 High
(01.116.044 Complete Set or
01.116.244 Upgrade Set)
3 High Graphic Case* (60.037.003)
Locking Instrumentation for All EX Nails
1.5 High
(01.116.049 Complete Set or
01.116.249 Upgrade Set)
2 High Graphic Case* (60.037.002)
*Lifting Posts-8 pack (60.116.170)
36
Synthes
EX Nail Instrument Sets
Set Configuration Suggestions
ALFN Set
Total Weight: 31.35 lbs.
Opening Instrumentation for ALFN
1 High
(01.116.037 Complete Set or
01.116.237 Upgrade Set)
Insertion Instrumentation for ALFN
1.5 High
(01.116.044 Complete Set or
01.116.244 Upgrade Set)
Locking Instrumentation for All EX Nails
1.5 High
(01.116.049 Complete Set or
01.116.249 Upgrade Set)
4 High Graphic Case (60.037.004)
EX Nail Instrument Sets
Synthes
37
Set Configuration Suggestions
LFN Set
Total Weight: 22.52 lbs. (Case 1)
15.56 lbs. (Case 2)
Opening Instrumentation for LFN
1 High
(01.116.038 Complete Set or
01.116.238 Upgrade Set)
Insertion Instrumentation for LFN
1.5 High
(01.116.045 Complete Set or
01.116.245 Upgrade Set)
3 High Graphic Case* (60.037.003)
Locking Instrumentation for All EX Nails
1.5 High
(01.116.049 Complete Set or
01.116.249 Upgrade Set)
2 High Graphic Case* (60.037.002)
*Lifting Posts, 8 pack (60.116.170)
38
Synthes
EX Nail Instrument Sets
Set Configuration Suggestions
LFN Set
Total Weight: 33.74 lbs.
Opening Instrumentation for LFN
1 High
(01.116.038 Complete Set or
01.116.238 Upgrade Set)
Insertion Instrumentation for LFN
1.5 High
(01.116.045 Complete Set or
01.116.245 Upgrade Set)
Locking Instrumentation for All EX Nails
1.5 High
(01.116.049 Complete Set or
01.116.249 Upgrade Set)
4 High Graphic Case (60.037.004)
EX Nail Instrument Sets
Synthes
39
Set Configuration Suggestions
RAFN Set
Total Weight: 22.69 lbs. (Case 1)
15.56 lbs. (Case 2)
Opening Instrumentation for RAFN
1 High
(01.116.039 Complete Set or
01.116.239 Upgrade Set)
Insertion Instrumentation for RAFN
1.5 High
(01.116.046 Complete Set or
01.116.246 Upgrade Set)
3 High Graphic Case* (60.037.003)
Locking Instrumentation for All EX Nails
1.5 High
(01.116.049 Complete Set or
01.116.249 Upgrade Set)
2 High Graphic Case* (60.037.002)
*Lifting Posts, 8 pack (60.116.170)
40
Synthes
EX Nail Instrument Sets
Set Configuration Suggestions
RAFN Set
Total Weight: 34.03 lbs.
Opening Instrumentation for RAFN
1 High
(01.116.039 Complete Set or
01.116.239 Upgrade Set)
Insertion Instrumentation for RAFN
1.5 High
(01.116.046 Complete Set or
01.116.246 Upgrade Set)
Locking Instrumentation for All EX Nails
1.5 High
(01.116.049 Complete Set or
01.116.249 Upgrade Set)
4 High Graphic Case (60.037.004)
EX Nail Instrument Sets
Synthes
41
Set Configuration Suggestions
Tibia Set
Total Weight: 22.22 lbs. (Case 1)
15.56 lbs. (Case 2)
Opening Instrumentation for Tibia
1 High
(01.116.040 Complete Set or
01.116.240 Upgrade Set)
Insertion Instrumentation for Tibia
3 High
(01.116.047 Complete Set or
01.116.247 Upgrade Set)
4 High Graphic Case (60.037.004)
Locking Instrumentation for All EX Nails
1.5 High
(01.116.049 Complete Set or
01.116.249 Upgrade Set)
2 High Graphic Case* (60.037.002)
*Lifting Posts, 8 pack (60.116.170)
42
Synthes
EX Nail Instrument Sets
Set Configuration Suggestions
Tibia Set–continued
EX Nail Instrument Sets
Synthes
43
Set Configuration Suggestions
Tibia Set with Suprapatellar Instruments
Total Weight:
21.27 lbs. (Case 1)
19.85 lbs. (Case 2)
Opening Instrumentation for Tibia
1 High
(01.116.040 Complete Set or
01.116.240 Upgrade Set)
Locking Instrumentation for All EX Nails
1.5 High
(01.116.049 Complete Set or
01.116.249 Upgrade Set)
3 High Graphic Case* (60.037.003)
Insertion Instrumentation for Tibia
with Suprapatellar Instruments
4 High
(01.116.048 Complete Set or
01.116.248 Upgrade Set)
4 High Graphic Case (60.037.004)
*Lifting Posts, 8 pack (60.116.170)
44
Synthes
EX Nail Instrument Sets
Set Configuration Suggestions
Tibia Set with Suprapatellar Instruments
EX Nail Instrument Sets
Synthes
45
Set Configuration Suggestions
Universal EX Nail Instrument Set
Total Weight: 26.11 lbs.
Opening Instrumentation for All EX Nails
1.5 High
(01.116.036 Complete Set or
01.116.236 Upgrade Set)
Locking Instrumentation for All EX Nails
1.5 High
(01.116.049 Complete Set or
01.116.249 Upgrade Set)
3 High Graphic Case (60.037.003)
To insert a nail, the nail specific insertion
tray is required.
46
Synthes
EX Nail Instrument Sets
Set Configuration Suggestions
Opening/Reaming Instrument Set
Total Weight: 20.87 lbs.
Opening Instrumentation for All EX Nails
1.5 High
(01.116.036 Complete Set or
01.116.236 Upgrade Set)
Reaming Instrumentation for All EX Nails
1 High
(01.116.043 Complete Set or
01.116.243 Upgrade Set)
3 High Graphic Case* (60.037.003)
*Lifting Posts, 8 pack (60.116.170)
To insert a nail, the nail specific insertion tray is
required. To lock a nail, the locking tray is required.
EX Nail Instrument Sets
Synthes
47
Set Configuration Suggestions
Reduction/Reaming Instrument Set
Total Weight: 21.44 lbs.
Reduction Instrumentation
1.5 High
(01.116.041 Complete Set or
01.116.241 Upgrade Set)
Reaming Instrumentation for All EX Nails
1 High
(01.116.043 Complete Set or
01.116.243 Upgrade Set)
3 High Graphic Case (60.037.003)*
*Lifting Posts, 8 pack (60.116.170)
To insert a nail, the nail specific insertion tray is required.
48
Synthes
EX Nail Instrument Sets
Synthes USA
1302 Wrights Lane East
West Chester, PA 19380
Telephone: (610) 719-5000
To order: (800) 523-0322
Fax: (610) 251-9056
© 2013 Synthes, Inc. or its affiliates. All rights reserved.
Synthes (Canada) Ltd.
2566 Meadowpine Boulevard
Mississauga, Ontario L5N 6P9
Telephone: (905) 567-0440
To order: (800) 668-1119
Fax: (905) 567-3185
Synthes is a trademark of Synthes, Inc. or its affiliates.
www.synthes.com
Printed in U.S.A. 5/13 J12250-A