new cat working copy

Florida Metal Products Inc.
MANUFACTURERS OF QUALITY BUILDING PRODUCTS
RESIDENTIAL
BUILDING PRODUCTS
QUALITY AND SERVICE FOR OVER 86 YEARS
FLORIDA METAL PRODUCTS INC.
PO BOX 6310
JACKSONVILLE, FL 32236
SALES: 800.634.3937
HOME OFFICE: 904.783.8400
FAX: 904.783.8403
WEB: WWW.FLAMCO.COM
CLICK ANY PAGE NUMBER TO JUMP TO THAT PAGE
INDEX
90 Degree Angle (Corner Bead)
All Purpose Vent
Aluminum Roll Valley
Anchor Bolt
Angle Flashing
Apron Flashing
Ash Dump
Bar Tie
Bar Tie Twister
Black Increaser
Black Reducer
Black Stove Elbow
Black Stove Pipe
Black Tee Cover
Black Tee Joint
Block Lintel
Brick Lintel
Brown Aluminum 5" K Gutter & Accessories
Bull Nose Corner Bead
Cast Iron Damper
Chimney Hood
Clean Out Door
Closed Gravel Stop
Corner Bead
Crawl Space Door
Dryer Vent Kits
Eave Drip
End Plugs
Flat Sheet
Formed Valley
Foundation Anchor
Foundation Vent
Furnace Elbow
Furnace Pipe
Galvanized 5" K Gutter & Accessories
Galvanized 6" K Gutter & Accessories
Galvanized Half Round Gutter
Galvanized Round Downspout
Girder Shield
Gooseneck Roof Vent
H Molding
Handy Rolls 10' & 25'
Hurricane Anchor
Increaser
Insulated Support Wire
J Bead
28
34
10
29
20
21
32
29
29
38
38
37
36
38
38
30
30
2
28
32
36
31
17
28
31
38
16
34
22
10
30
32
36
35
3
4
4
6
24
35
27
7
25
37
27
28
Joist Bridging
L Bead
Midget Louver
Mud Type L Bead
Off Ridge Vents 2' 4' 6' 8'
Open Gravel Stop
Painted Aluminum 50' Rolls
Plastic Shingle Over Vent
Plywood Clips
Power Attic Ventilator
Preformed Valley
Rafter Ties
Rain Diverter
Reducer
Ridge Cap
Ridge Roll
Ridge Vent
Rod Chair
Roll Valley Flashing
Roof Edge
Roof Jack
Roof Trim
Roof Vent
Soffit Vent
Starter Strip
Steel Mill Angle
Step Flashing
T Brace
Tee Cover
Tee Joint
Termite Shield
Tie Wire
Tile Flashings
Truss Anchor
Turbine
U Bead
U Type Joist Hanger
Under Eave Vent
Vent Hood
Wall Bracing
Wall Tie
White Aluminum 5" K Gutter
White Aluminum 6" K Gutter
Window Wells
Z Flashing
Z Insulation & Furring Channel
Credit Application on page 40
All Rights Reserved 2009 / 2010 © Florida Metal Products Inc.
25
28
32
28
34
19
7
33
27
33
12
25
6
36
23
22
33
29
8
14
34
13
33
32
28
31
22
27
37
37
24
29
21
30
33
28
25
32
38
27
29
1
4
24
23
28
Return to Index Page
WHITE ALUMINUM 5K GUTTER SYSTEM
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
WHITE ALUMINUM 5K GUTTER
GUT561
GUTTER - 10'
GUT567
GUTTER - 16'
GUT568
GUTTER - 21'
GUT562
GUTTER - 10' PREMIUM
GUT563
GUTTER - 16' PREMIUM
GUT564
GUTTER - 21' PREMIUM
GUT580
GUTTER - 10' COMMERCIAL
GUT592
GUTTER - 16' COMMERCIAL
GUT593
GUTTER - 21' COMMERCIAL
10
10
10
10
10
10
10
10
10
23
36
47
30
47
62
38
61
100
WHITE ALUMINUM 5K DOWNSPOUT
GUT579
3" S/C DOWNSPOUT - 10'
GUT578
3" S/C DOWNSPOUT - 10' PREMIUM
GUT590
3" S/C DOWNSPOUT - 10' COMMERCIAL
10
10
10
15
17
22
WHITE ALUMINUM 5K ELBOWS AND ACCESSORIES
GUT5465
3" S/C "A" ELBOW - 75º
GUT5466
3" S/C "B" ELBOW - 75º
GUT5445
3" S/C "A" ELBOW - 60º (.020)
GUT5446
3" S/C "A" ELBOW - 75º (.020)
GUT5464
3" S/C "B" ELBOW - 75º (.020)
GUT5527
OUTSIDE MITRE
GUT5528
INSIDE MITRE
GUT5537
END PIECE WITH OUTLET
GUT5555
END CAPS (1PR / BAG)
GUT5553
END CAPS - RIGHT HAND
GUT5554
END CAPS - LEFT HAND
GUT5598
SLIP CONNECTOR (3 / BAG)
GUT5597
SLIP CONNECTOR
GUT5595
CROSS BAR HANGER
GUT5596
CROSS BAR HANGER (5 / BAG)
GUT5590
CROSS BAR ONLY
GUT5571
STRAP HANGER
GUT1725
HIDDEN HANGER (5 / BAG)
GUT1149
SPIKE & FERRULE PACK (10 / BAG)
GUT1741
FERRULES - MILL
GUT1734
7" SPIKES (500 / CARTON)
GUT1735
8" SPIKES (500 / CARTON)
GUT2595
GUTTER SEALER - 7 OZ TUBE
GUT2597
GUTTER SEALER - 11 OZ CARTRIDGE
GUT5579
3" SQ WOOD HOOK
GUT5578
3" SQ BRICK HOOK
GUT9306
RIVETS (100 / BAG)
GUT9302
RIVETS ( 100 / BAG ) MILL
GUT5580
FUNNEL - 3"
GUT6705
3" ALUM MESH STRAINER
GUT1756
ALUM GUTTER SCREEN - 3 FT
GUT1750
ALUM GUTTER SCREEN 6" X 20'
GUT1751
ALUM GUTTER SCREEN 6" X 10'
GUT1800
VINYL GUTTER GUARD 7" X 3'
GUT1732
1.25" HANGER NAILS (100 / BAG)
GUT5478
GUTTER EXTENSION - 12"
GUT5480
GUTTER EXTENSION - 24"
30
30
30
30
30
20
20
12
50
50
50
30
50
100
50
100
100
50
25
500
1
1
24
12
50
50
10
10
12
50
50
24
24
125
50
20
20
5
5
6
6
7
7
7
5
3
3
3
4
7
15
8
4
12
4
13
5
10
15
15
9
4
10
1
1
2
3
10
18
8
43
6
6
12
1
Return to Index Page
WHITE ALUMINUM 5K GUTTER SYSTEM
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
20
20
100
30
50
5
10
5
1
3
PACKAGING
WEIGHT
BROWN ALUMINUM 5K GUTTER
GUT846
GUTTER - 10'
GUT847
GUTTER - 16'
GUT848
GUTTER - 21'
GUT850
GUTTER - 10' PREMIUM
GUT851
GUTTER - 16' PREMIUM
GUT852
GUTTER - 21' PREMIUM
GUT880
GUTTER - 10' COMMERCIAL
GUT881
GUTTER - 16' COMMERCIAL
GUT882
GUTTER - 21' COMMERCIAL
10
10
10
10
10
10
10
10
10
23
36
47
30
47
62
38
61
80
BROWN ALUMINUM 5K DOWNSPOUT
GUT855
3" S/C DOWNSPOUT - 10'
GUT854
3" S/C DOWNSPOUT - 10' PREMIUM
10
10
15
17
30
30
20
20
12
50
50
50
30
50
100
50
100
100
25
1
24
10
12
125
100
50
5
5
7
7
5
3
3
3
4
7
15
8
4
12
13
10
15
1
2
43
5
3
WHITE ALUMINUM 5K ELBOWS AND ACCESSORIES
GUT5470
DOWNSPOUT EXTENSION - 15"
GUT5472
DOWNSPOUT EXTENSION - 30"
GUT5593
UNIVERSAL BAND
GUT5568
MILL ALUM RIVET TUBE
GUT5575
CLINCHER BAND (2 / BAG)
BROWN ALUMINUM 5K GUTTER SYSTEM
PRODUCT NO.
DESCRIPTION
LOOK US UP ON THE WEB WWW.FLAMCO.COM
BROWN ALUMINUM 5K ELBOWS AND ACCESSORIES
GUT870
3" S/C "A" ELBOW - 75º
GUT871
3" S/C "B" ELBOW - 75º
GUT856
OUTSIDE MITRE
GUT857
INSIDE MITRE
GUT865
END PIECE WITH OUTLET
GUT862
END CAPS (1PR / BAG)
GUT860
END CAPS - RIGHT HAND
GUT861
END CAPS - LEFT HAND
GUT864
SLIP CONNECTOR (3 / BAG)
GUT863
SLIP CONNECTOR
GUT869
CROSS BAR HANGER
GUT866
CROSS BAR HANGER (5 / BAG)
GUT859
CROSS BAR ONLY
GUT800
STRAP HANGER
GUT1144
SPIKE & FERRULE PACK (10 / BAG)
GUT1737
7" SPIKES (500 / BAG)
GUT2590
GUTTER SEALER - 7 OZ TUBE
GUT9304
RIVETS ( 100 / BAG ) MILL
GUT878
FUNNEL - 3"
GUT1801
VINYL GUTTER GUARD 7" X 3'
GUT873
UNIVERSAL BAND
GUT875
CLINCHER BAND (2 / BAG)
2
Return to Index Page
GALVANIZED 5K GUTTER SYSTEM
DESCRIPTION
PRODUCT NO.
PACKAGING
WEIGHT
GALVANIZED 5K GUTTER
GUT421
GUTTER - 10' STD GA
GUT431
GUTTER - 20' STD GA
GUT521
GUTTER - 10' 28 GA
GUT531
GUTTER - 20' 28 GA
GUT621
GUTTER - 10' 26 GA
GUT631
GUTTER - 20' 26 GA
10
5
10
5
10
5
56
56
70
70
78
78
GALVANIZED 5K DOWNSPOUT
GUT411
3" S/C DOWNSPOUT - 10' STD GA
GUT511
3" S/C DOWNSPOUT - 10' 28 GA
GUT611
3" S/C DOWNSPOUT - 10' 26 GA
10
10
10
44
50
68
GALVANIZED 5K ELBOWS AND ACCESSORIES
GUT5046
3" S/C "A" ELBOW - 75º 28 GA
GUT5054
3" S/C "B" ELBOW - 75º 28 GA
GUT5146
3" S/C "A" ELBOW - 75º 26 GA
GUT5154
3" S/C "A" ELBOW - 75º 26 GA
GUT6539
3" S/C CUT OFF
GUT2633
OUTSIDE MITRE
GUT2634
INSIDE MITRE
GUT2653
END CAPS - RIGHT HAND
GUT2654
END CAPS - LEFT HAND
GUT2540
END PIECE WITH OUTLET
GUT2666
SLIP CONNECTOR
GUT1110
CROSS BAR HANGER
GUT1154
STRAP HANGER
GUT1147
SPIKE & FERRULE PACK (10 / BAG)
GUT1132
7" SPIKES (50 LBS / CARTON) 900 APPROX
GUT1133
8" SPIKES (50 LBS / CARTON) 750 APPROX
GUT1141
FERRULE
GUT1155
UNIVERSAL BAND
GUT3128
3" SQ WOOD HOOK
GUT3107
3" SQ BRICK HOOK
GUT6704
3" ALUM MESH STRAINER
GUT6601
FUNNEL - 3"
GUT2668
RIVET TUBE - 3" WIDE FLANGE
GUT2669
OUTLET TUBE - 3"
GUT2680
GUTTER EXTENSION - 12"
GUT2681
GUTTER EXTENSION - 24"
GUT5060
DOWNSPOUT EXTENSION - 15"
GUT5062
DOWNSPOUT EXTENSION - 30"
20
20
20
20
10
20
20
50
50
12
50
50
100
25
1
1
500
100
50
50
50
10
30
50
10
10
20
20
9
10
11
13
10
15
15
8
8
7
19
24
29
25
50
50
12
12
4
10
6
9
5
8
5
10
13
26
FLAMCO manufactures one of the most complete lines of residential
building products in all material requirements: galvanized, copper, galvalume
aluminum, stainless steel and paintgrip. We place primary importance
on assuring our customers top quality products made from the
finest materials available. In fact, we guarantee it...
3
Return to Index Page
6K GUTTER SYSTEM
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
WHITE ALUMINUM 6K GUTTER SYSTEM
GUT584
GUTTER - 10' .027 GA
GUT585
GUTTER - 20' .027 GA
GUT586
4" S/C DOWNSPOUT - 10' .019 GA
GUT5448
4" S/C "A" ELBOW 75º
GUT5449
4" S/C "B" ELBOW 75º
GUT5543
OUTSIDE MITRE
GUT5542
INSIDE MITRE
GUT5557
END CAP - RIGHT HAND
GUT5558
END CAP - LEFT HAND
GUT5599
FASCIA BRACKET WITH CAP
GUT5572
STRAP HANGER
GUT1735
8" SPIKES (500)
GUT1742
6" FERRULES - MILL
GUT5593
UNIVERSAL BAND
GUT5552
4" SQ RIVET TUBE - MILL
GUT995
4" SQ WOOD HOOK
GUT996
4" SQ BRICK HOOK
10
5
10
20
20
20
20
50
50
50
100
1
500
100
50
50
50
45
45
30
9
10
11
11
5
5
13
60
15
6
5
7
5
13
GALVANIZED 6K GUTTER SYSTEM
GUT622
GUTTER - 10' 28 GA
GUT625
GUTTER - 20' 28 GA
GUT612
4" S/C DOWNSPOUT - 10' 28 GA
GUT5150
4" S/C "A" ELBOW 75º
GUT5158
4" S/C "B" ELBOW 75º
GUT2635
OUTSIDE MITRE
GUT2636
INSIDE MITRE
GUT2642
END PIECE WITH OUTLET
GUT2675
END CAP - RIGHT HAND
GUT2676
END CAP - LEFT HAND
GUT2667
SLIP CONNECTOR
GUT1113
FASCIA BRACKET WITH CLIP
GUT1133
8" SPIKES (750)
GUT1142
6" FERRULES - MILL
GUT1155
UNIVERSAL BAND
GUT2670
4" SQ RIVET TUBE - MILL
GUT3129
4" SQ WOOD HOOK
GUT3108
4" SQ BRICK HOOK
10
5
10
20
20
20
20
20
50
50
50
50
1
500
100
50
50
50
80
80
78
19
19
30
30
12
17
17
23
25
50
15
12
16
5
13
PACKAGING
WEIGHT
10
10
10
10
30
20
20
20
20
32
64
25
42
6
19
7
7
10
HALF ROUND GUTTER
PRODUCT NO.
DESCRIPTION
WHITE ALUMINUM 5" HALF ROUND GUTTER SYSTEM
GUT750
GUTTER - 10' .027 GA
GUT749
GUTTER - 20' .027 GA
GUT751
3" R/C DOWNSPOUT - 10' .027 GA
GUT587
4" R/C DOWNSPOUT - 10' .027 GA
GUT752
3" R/C ELBOW 75º
GUT5450
4" R/C ELBOW 75º
GUT753
OUTSIDE MITRE
GUT754
INSIDE MITRE
GUT755
END PIECE WITH OUTLET
4
Return to Index Page
HALF ROUND GUTTER GUTTER SYSTEM
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
50
50
50
100
50
50
50
50
50
50
50
50
50
100
50
5
5
5
5
20
20
20
20
20
50
50
50
50
12
50
50
100
100
50
50
50
50
50
50
50
50
50
50
50
5
5
5
28
19
12
2
11
10
10
10
4
3
1
13
32
65
40
80
21
24
21
24
10
7
10
9
14
12
9
16
28
34
19
22
12
13
2
11
10
10
7
7
8
GALVANIZED HALF ROUND GUTTER
GUT763
3" "B" DROP TUBE
GUT756
END CAP
GUT757
SLIP CONNECTOR
GUT764
STRAP HANGER
GUT758
COMBINATION HANGER
GUT759
CIRCLE
GUT765
SPRING CLIP
GUT760
NO: 10 SHANK
GUT761
NO: 11 SHANK
GUT762
NO: 12 SHANK
GUT5576
3" RD BRICK HOOK
GUT5577
3" RD WOOD HOOK
GUT5581
RACK AND KEY
GUT5582
KEY ONLY - MILL
GUT997
4" RB BRICK HOOK
GUT616-5
5" H/R GUTTER - 10' 26 GA
GUT636
5" H/R GUTTER - 20' 26 GA
GUT617
6" H/R GUTTER - 10' 26 GA
GUT617-20
6" H/R GUTTER - 20' 26 GA
GUT2601
OUTSIDE MITRE - 5"
GUT2605
OUTSIDE MITRE - 6"
GUT2604
INSIDE MITRE - 5"
GUT2606
INSIDE MITRE - 6"
GUT2509
5" X 3" END PIECE
GUT2616
5" END CAP
GUT2617
6" END CAP
GUT2622
5" SLIP CONNECTOR
GUT2623
6" SLIP CONNECTOR
GUT6511
3" TUBE 7" X 7" X 10"
GUT2625
3" "B" OUTLET TUBE
GUT2626
4" "B" OUTLET TUBE
GUT1151
5" STRAP HANGER
GUT1152
6" STRAP HANGER
GUT1104
5" COMBINATION HANGER
GUT1105
6" COMBINATION HANGER
GUT1107
5" CIRCLE
GUT1108
6" CIRCLE
GUT1115
SPRING CLIP
GUT1121
NO: 10 SHANK
GUT1122
NO: 11 SHANK
GUT1123
NO: 12 SHANK
GUT3150
NO: 0 DRIVE
GUT3151
NO: 4 DRIVE
GUT3155
RACK AND KEY
HIGHEST QUALITY PRODUCTS
We place primary importance on assuring our customers top
quality products made from the finest materials available. In fact, we guarantee it...
5
Return to Index Page
HALF ROUND GUTTER
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
GALVANIZED ROUND CORRUGATED DOWNSPOUT
GUT406-5
3" R/C DOWNSPOUT - 10' 30 GA
GUT506-5
3" R/C DOWNSPOUT - 10' 28 GA
GUT606-5
3" R/C DOWNSPOUT - 10' 26 GA
GUT407-5
4" R/C DOWNSPOUT - 10' 30 GA
GUT507-5
4" R/C DOWNSPOUT - 10' 28 GA
GUT607-5
4" R/C DOWNSPOUT - 10' 26 GA
GUT608-5
5" R/C DOWNSPOUT - 10' 26 GA
GUT609-5
6" R/C DOWNSPOUT - 10' 26 GA
5
5
5
5
5
5
5
5
24
30
32
40
39
43
57
81
GALVANIZED PLAIN ROUND DOWNSPOUT
GUT403-5
3" P/R DOWNSPOUT - 10' 30 GA
GUT503-5
3" P/R DOWNSPOUT - 10' 28 GA
GUT603-5
3" P/R DOWNSPOUT - 10' 26 GA
GUT402-5
4" P/R DOWNSPOUT - 10' 30 GA
GUT502-5
4" P/R DOWNSPOUT - 10' 28 GA
GUT602-5
4" P/R DOWNSPOUT - 10' 26 GA
5
5
5
5
5
5
24
30
32
40
39
43
GALVANIZED ROUND CORRUGATED ELBOW
GUT5126
3" R/C ELBOW 75º 26 GA
GUT5130
4" R/C ELBOW 75º 26 GA
GUT5127
3" R/C ELBOW 90º 26 GA
GUT5131
4" R/C ELBOW 90º 26 GA
GUT5033
5" R/C ELBOW 75º 26 GA
GUT5032
6" R/C ELBOW 75º 26 GA
20
20
20
20
10
10
10
20
10
20
17
27
GALVANIZED PLAIN ROUND ELBOW
GUT5106
3" P/R ELBOW 75º 26 GA
GUT5110
4" P/R ELBOW 75º 26 GA
GUT5111
3" P/R ELBOW 90º 26 GA
20
20
20
10
20
20
WOOD AND BRICK HOOKS
GUT3122
3" RD WOOD HOOK
GUT3101
3" RD BRICK HOOK
GUT3123
4" RD WOOD HOOK
GUT3102
4" RD BRICK HOOK
50
50
50
50
4
10
5
13
PACKAGING
WEIGHT
ECONOMY GAUGE GALVANIZED RAIN DIVERTER
RDS06
6" RAIN DIVERTER GALV
RDS75
7.5" RAIN DIVERTER GALV
RDS08
8" RAIN DIVERTER GALV
RDS12
12" RAIN DIVERTER GALV
10
10
10
10
20
25
27
40
STANDARD GAUGE GALVANIZED RAIN DIVERTER
RD2906
6" RAIN DIVERTER STD GA GALV
RD2975
7.5" RAIN DIVERTER STD GA GALV
RD2908
8" RAIN DIVERTER STD GA GALV
RD2912
12" RAIN DIVERTER STD GA GALV
10
10
10
10
24
30
32
48
RAIN DIVERTER
PRODUCT NO.
DESCRIPTION
6
Return to Index Page
RAIN DIVERTER
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
26 GAUGE GALVANIZED RAIN DIVERTER
RD2606
6" RAIN DIVERTER 26 GA GALV
RD2675
7.5" RAIN DIVERTER 26 GA GALV
RD2608
8" RAIN DIVERTER 26 GA GALV
RD2612
12" RAIN DIVERTER 26 GA GALV
10
10
10
10
39
49
52
78
STANDARD GAUGE BROWN GALVANIZED RAIN DIVERTER
RD29BR06
6" RAIN DIVERTER STD GA BR GALV
RD29BR75
7.5" RAIN DIVERTER STD GA BR GALV
RD29BR08
8" RAIN DIVERTER STD GA BR GALV
RD29BR12
12" RAIN DIVERTER STD GA BR GALV
10
10
10
10
24
30
32
48
26 GAUGE BROWN GALVANIZED RAIN DIVERTER
RD26BR06
6" RAIN DIVERTER 26 GA BR GALV
RD26BR75
7.5" RAIN DIVERTER 26 GA BR GALV
RD26BR08
8" RAIN DIVERTER 26 GR BR GALV
RD26BR12
12" RAIN DIVERTER 26 GA BR GALV
10
10
10
10
39
49
52
78
26 GAUGE BLACK GALVANIZED RAIN DIVERTER
RD26BK06
6" RAIN DIVERTER 26 GA BK GALV
RD26BK75
7.5" RAIN DIVERTER 26 GA BK GALV
RD26BK08
8" RAIN DIVERTER 26 GA BK GALV
RD26BK12
12" RAIN DIVERTER 26 GA BK GALV
10
10
10
10
39
49
52
78
PACKAGING
WEIGHT
10
EACH
10
10
EACH
10
10
EACH
10
EACH
10
2
10
10
2
10
10
3
20
4
PAINTED ALUMINUM HANDY ROLL (WHITE AND BLACK PAINTED ROLLS ALSO AVAILABLE)
VA6750
6" X 10'
WHITE / BROWN ALUM
EACH
VA6758
6" X 25'
WHITE / BROWN ALUM
EACH
VA6751
8" X 10'
WHITE / BROWN ALUM
EACH
VA6759
8" X 25'
WHITE / BROWN ALUM
EACH
VA6652
10" X 10'
WHITE / BROWN ALUM
EACH
VA6654
10" X 25'
WHITE / BROWN ALUM
EACH
VA6653
14" X 10'
WHITE / BROWN ALUM
EACH
VA6686
14" X 25'
WHITE / BROWN ALUM
EACH
1
2
1
3
1
4
2
5
10 FT. AND 25 FT. HANDY ROLLS
DESCRIPTION
PRODUCT NO.
MILL ALUMINUM HANDY ROLLS
VAEC0710
7" X 10'
VAEC7025
7" X 25'
VAEC0810
8" X 10'
VAEC1010
10" X 10'
VAEC1025
10" X 25'
VAEC1210
12" X 10'
VAEC1410
14" X 10'
VAEC1425
14" X 25'
VAEC2010
20" X 10'
VAEC2025
20" X 25'
ALUM
ALUM
ALUM
ALUM
ALUM
ALUM
ALUM
ALUM
ALUM
ALUM
7
Return to Index Page
10 FT. AND 25 FT. HANDY ROLLS
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
PAINTED ALUMINUM HANDY ROLLS
VA6655
20" X 10'
WHITE / BROWN ALUM
VA6688
20" X 25'
WHITE / BROWN ALUM
VA6756
24" X 10'
WHITE / BROWN ALUM
VA6789
24" X 25'
WHITE / BROWN ALUM
EACH
EACH
EACH
EACH
3
7
4
9
GALVANIZED HANDY ROLLS
VGS0810
8" X 10'
VGS0825
8" X 25'
VGS1010
10" X 10'
VGS1025
10" X 25'
VGS1205
12" X 5'
VGS1210
12" X 10'
VGS1225
12" X 25'
GALV
GALV
GALV
GALV
GALV
GALV
GALV
EACH
EACH
EACH
EACH
EACH
EACH
EACH
3
7
3
8
2
4
10
GALVANIZED HANDY ROLLS
VGS1410
14" X 10'
VGS1425
14" X 25'
VGS1610
16" X 10'
VGS1625
16" X 25'
VGS2010
20" X 10'
VGS2025
20" X 25'
VGS2410
24" X 10'
VGS2425
24" X 25'
GALV
GALV
GALV
GALV
GALV
GALV
GALV
GALV
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
5
12
5
14
7
17
8
20
PACKAGING
WEIGHT
50 FT. PAINTED ROLLS
PRODUCT NO.
DESCRIPTION
ECONOMY GAUGE TRIM COIL
VA6508
6" X 50'
VA6509
8" X 50'
VA6501
12" X 50'
VA6502
14" X 50'
VA6503
16" X 50'
VA6504
18" X 50'
VA6506
20" X 50'
WHITE ON BROWN
WHITE ON BROWN
WHITE ON BROWN
WHITE ON BROWN
WHITE ON BROWN
WHITE ON BROWN
WHITE ON BROWN
EACH
EACH
EACH
EACH
EACH
EACH
EACH
4
6
9
10
12
13
15
STANDARD GAUGE TRIM COIL
VA6808
6" X 50'
VA6809
8" X 50'
VA6800
10" X 50'
VA6801
12" X 50'
VA6802
14" X 50'
VA6803
16" X 50'
VA6804
18" X 50'
VA6805
20" X 50'
VA6806
24" X 50'
WHITE ON BROWN
WHITE ON BROWN
WHITE ON BROWN
WHITE ON BROWN
WHITE ON BROWN
WHITE ON BROWN
WHITE ON BROWN
WHITE ON BROWN
WHITE ON BROWN
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
5
7
9
11
13
14
16
18
22
8
Return to Index Page
50 FT. GALVANIZED ROLLS
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
ECONOMY GAUGE GALVANIZED ROLL VALLEY
VGS0450
4" X 50'
GALV
VGS0650
6" X 50'
GALV
VGS0850
8" X 50'
GALV
VGS1050
10" X 50'
GALV
VGS1250
12" X 50'
GALV
VGS1450
14" X 50'
GALV
VGS1650
16" X 50'
GALV
VGS1850
18" X 50'
GALV
VGS2050
20" X 50'
GALV
VGS2450
24" X 50'
GALV
VGS2850
28" X 50'
GALV
VGS3050
30" X 50'
GALV
VGS3650
36" X 50'
GALV
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
7
10
13
17
20
23
26
30
33
40
47
50
60
STANDARD GAUGE GALVANIZED ROLL VALLEY
VG290450
4" X 50'
STD GA GALV
VG290650
6" X 50'
STD GA GALV
VG290850
8" X 50'
STD GA GALV
VG291050
10" X 50'
STD GA GALV
VG291250
12" X 50'
STD GA GALV
VG291450
14" X 50'
STD GA GALV
VG291650
16" X 50'
STD GA GALV
VG291850
18" X 50'
STD GA GALV
VG292050
20" X 50'
STD GA GALV
VG292450
24" X 50'
STD GA GALV
VG292850
28" X 50'
STD GA GALV
VG293050
30" X 50'
STD GA GALV
VG293650
36" X 50'
STD GA GALV
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
8
12
16
20
24
28
32
36
40
48
56
60
72
26 GAUGE GALVANIZED ROLL VALLEY
VG260450
4" X 50'
26 GA GALV
VG260650
6" X 50'
26 GA GALV
VG260850
8" X 50'
26 GA GALV
VG261050
10" X 50'
26 GA GALV
VG261250
12" X 50'
26 GA GALV
VG261450
14" X 50'
26 GA GALV
VG261650
16" X 50'
26 GA GALV
VG261850
18" X 50'
26 GA GALV
VG262050
20" X 50'
26 GA GALV
VG262450
24" X 50'
26 GA GALV
VG262850
28" X 50'
26 GA GALV
VG263050
30" X 50'
26 GA GALV
VG263650
36" X 50'
26 GA GALV
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
13
20
26
33
39
46
52
59
65
78
92
98
117
WE HAVE A FULL LINE OF ROOF VENTS STARTING ON PAGE 32
9
Return to Index Page
50 FT. ALUMINUM ROLLS
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
ECONOMY GAUGE ALUMINUM ROLL VALLEY
VAEC0450
4" X 50'
ALUM
VAEC0650
6" X 50'
ALUM
VAEC7050
7" X50'
ALUM
VAEC0850
8" X 50'
ALUM
VAEC1050
10" X 50'
ALUM
VAEC1250
12" X 50'
ALUM
VAEC1450
14" X 50'
ALUM
VAEC1650
16" X 50'
ALUM
VAEC1850
18" X 50'
ALUM
VAEC2050
20" X 50'
ALUM
VAEC2450
24" X 50'
ALUM
VAEC2850
28" X 50'
ALUM
VAEC3050
30" X 50'
ALUM
VAEC3650
36" X 50'
ALUM
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
2
3
3
4
5
6
7
8
9
10
12
14
15
18
STANDARD GAUGE ALUMINUM ROLL VALLEY
VAST0450
4" X 50'
STD GA ALUM
VAST0650
6" X 50'
STD GA ALUM
VAST0750
7" X50'
STD GA ALUM
VAST0850
8" X 50'
STD GA ALUM
VAST1050
10" X 50'
STD GA ALUM
VAST1250
12" X 50'
STD GA ALUM
VAST1450
14" X 50'
STD GA ALUM
VAST1650
16" X 50'
STD GA ALUM
VAST1850
18" X 50'
STD GA ALUM
VAST2050
20" X 50'
STD GA ALUM
VAST2450
24" X 50'
STD GA ALUM
VAST2850
28" X 50'
STD GA ALUM
VAST3050
30" X 50'
STD GA ALUM
VAST3650
36" X 50'
STD GA ALUM
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
3
4
4
5
7
8
9
10
12
13
16
18
20
23
PREMIUM GAUGE MILL ALUMINUM .019
GUT6570
10" X 50'
.019 ALUM
GUT6571
14" X 50'
.019 ALUM
GUT6572
20" X 50'
.019 ALUM
GUT6573
24" X 50
.019 ALUM
EACH
EACH
EACH
EACH
8
12
17
20
PACKAGING
WEIGHT
STANDARD GAUGE GALVANIZED FORMED VALLEY
VV2915
15" FORMED VALLEY STD GA GALV
VV2916
16" FORMED VALLEY STD GA GALV
VV2918
18" FORMED VALLEY STD GA GALV
VV2920
20" FORMED VALLEY STD GA GALV
EACH
EACH
EACH
EACH
5
6
7
8
STANDARD GAUGE GALVANIZED FORMED VALLEY WITH HEM
VV2915HE
15" FORMED VALLEY STD GA GALV HEM
VV2916HE
16" FORMED VALLEY STD GA GALV HEM
VV2918HE
18" FORMED VALLEY STD GA GALV HEM
VV2920HE
20" FORMED VALLEY STD GA GALV HEM
EACH
EACH
EACH
EACH
5
6
7
8
FORMED VALLEY
PRODUCT NO.
DESCRIPTION
10
Return to Index Page
FORMED VALLEY
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
26 GAUGE GALVANIZED FORMED VALLEY
VV2615
15" FORMED VALLEY 26 GA GALV
VV2616
16" FORMED VALLEY 26 GA GALV
VV2618
18" FORMED VALLEY 26 GA GALV
VV2620
20" FORMED VALLEY 26 GA GALV
EACH
EACH
EACH
EACH
10
11
12
13
26 GAUGE GALVANIZED FORMED VALLEY WITH HEM
VV2615HE
15" FORMED VALLEY 26 GA GALV HEM
VV2616HE
16" FORMED VALLEY 26 GA GALV HEM
VV2618HE
18" FORMED VALLEY 26 GA GALV HEM
VV2620HE
20" FORMED VALLEY 26 GA GALV HEM
EACH
EACH
EACH
EACH
10
11
12
13
STANDARD GAUGE BROWN GALVANIZED FORMED VALLEY
VV29BR15
15" FORMED VALLEY 26 GA BR GALV
VV29BR16
16" FORMED VALLEY 26 GA BR GALV
VV29BR18
18" FORMED VALLEY 26 GA BR GALV
VV29BR20
20" FORMED VALLEY 26 GA BR GALV
EACH
EACH
EACH
EACH
5
6
7
8
STANDARD GAUGE BROWN GALVANIZED FORMED VALLEY WITH HEM
VV29BR15HE
15" FORMED VALLEY STD GA GALV HEM
VV29BR16HE
16" FORMED VALLEY STD GA GALV HEM
VV29BR18HE
18" FORMED VALLEY STD GA GALV HEM
VV29BR20HE
20" FORMED VALLEY STD GA GALV HEM
EACH
EACH
EACH
EACH
5
6
7
8
26 GAUGE BROWN GALVANIZED FORMED VALLEY
VV26BR15
15" FORMED VALLEY 26 GA BR GALV
VV26BR16
16" FORMED VALLEY 26 GA BR GALV
VV26BR18
18" FORMED VALLEY 26 GA BR GALV
VV26BR20
20" FORMED VALLEY 26 GA BR GALV
EACH
EACH
EACH
EACH
10
11
12
13
26 GAUGE BROWN GALVANIZED FORMED VALLEY WITH HEM
VV26BR15HE
15" FORMED VALLEY 26 GA BR GALV HEM
VV26BR16HE
16" FORMED VALLEY 26 GA BR GALV HEM
VV26BR18HE
18" FORMED VALLEY 26 GA BR GALV HEM
VV26BR20HE
20" FORMED VALLEY 26 GA BR GALV HEM
EACH
EACH
EACH
EACH
10
11
12
13
26 GAUGE BLACK GALVANIZED FORMED VALLEY
VV26BK15
15" FORMED VALLEY 26 GA BK GALV
VV26BK16
16" FORMED VALLEY 26 GA BK GALV
VV26BK18
18" FORMED VALLEY 26 GA BK GALV
VV26BK20
20" FORMED VALLEY 26 GA BK GALV
EACH
EACH
EACH
EACH
10
11
12
13
26 GAUGE BLACK GALVANIZED FORMED VALLEY WITH HEM
VV26BK15HE
15" FORMED VALLEY 26 GA BK GALV HEM
VV26BK16HE
16" FORMED VALLEY 26 GA BK GALV HEM
VV26BK18HE
18" FORMED VALLEY 26 GA BK GALV HEM
VV26BK20HE
20" FORMED VALLEY 26 GA BK GALV HEM
EACH
EACH
EACH
EACH
10
11
12
13
11
Return to Index Page
PREFORMED VALLEY
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
STANDARD GAUGE GALVANIZED PREFORMED VALLEY
VW2914
14" PREFORMED VALLEY STD GA GALV
VW2916
16" PREFORMED VALLEY STD GA GALV
VW2918
18" PREFORMED VALLEY STD GA GALV
VW2920
20" PREFORMED VALLEY STD GA GALV
EACH
EACH
EACH
EACH
5
6
7
8
STANDARD GAUGE GALVANIZED PREFORMED VALLEY WITH HEM
VW2916HE
16" PREFORMED VALLEY STD GA GALV HEM
VW2918HE
18" PREFORMED VALLEY STD GA GALV HEM
VW2920HE
20" PREFORMED VALLEY STD GA GALV HEM
EACH
EACH
EACH
6
7
8
26 GAUGE GALVANIZED PREFORMED VALLEY
VW2616
16" PREFORMED VALLEY 26 GA GALV
VW2618
18" PREFORMED VALLEY 26 GA GALV
VW2620
20" PREFORMED VALLEY 26 GA GALV
EACH
EACH
EACH
11
12
13
26 GAUGE GALVANIZED PREFORMED VALLEY WITH HEM
VW2616HE
16" PREFORMED VALLEY 26 GA GALV HEM
VW2618HE
18" PREFORMED VALLEY 26 GA GALV HEM
VW2620HE
20" PREFORMED VALLEY 26 GA GALV HEM
VW2624HE
24" PREFORMED VALLEY 26 GA GALV HEM
EACH
EACH
EACH
EACH
11
12
13
16
STANDARD GAUGE BROWN GALVANIZED PREFORMED VALLEY
VW29BR14
14" PREFORMED VALLEY STD GA BR GALV
VW29BR16
16" PREFORMED VALLEY STD GA BR GALV
VW29BR18
18" PREFORMED VALLEY STD GA BR GALV
VW29BR20
20" PREFORMED VALLEY STD GA BR GALV
EACH
EACH
EACH
EACH
5
6
7
8
STANDARD GAUGE BROWN GALVANIZED PREFORMED VALLEY WITH HEM
VW29BR16HE
16" PREFORMED VALLEY STD GA BR GALV HEM
VW29BR18HE
18" PREFORMED VALLEY STD GA BR GALV HEM
VW29BR20HE
20" PREFORMED VALLEY STD GA BR GALV HEM
EACH
EACH
EACH
6
7
8
26 GAUGE BROWN GALVANIZED PREFORMED VALLEY
VW29BR16
16" PREFORMED VALLEY STD GA BR GALV
VW26BR18
18" PREFORMED VALLEY STD GA BR GALV
VW26BR20
20" PREFORMED VALLEY STD GA BR GALV
EACH
EACH
EACH
11
12
13
26 GAUGE BROWN GALVANIZED PREFORMED VALLEY WITH HEM
VW29BR16HE
16" PREFORMED VALLEY STD GA BR GALV HEM
VW26BR18HE
18" PREFORMED VALLEY STD GA BR GALV HEM
VW26BR20HE
20" PREFORMED VALLEY STD GA BR GALV HEM
EACH
EACH
EACH
11
12
13
26 GAUGE BLACK GALVANIZED PREFORMED VALLEY
VW29BK16
16" PREFORMED VALLEY STD GA BK GALV HEM
VW26BK18
18" PREFORMED VALLEY STD GA BK GALV HEM
VW26BK20
20" PREFORMED VALLEY STD GA BK GALV HEM
EACH
EACH
EACH
11
12
13
26 GAUGE BLACK GALVANIZED PREFORMED VALLEY WITH HEM
VW29BK16HE
16" PREFORMED VALLEY STD GA BK GALV HEM
VW26BK18HE
18" PREFORMED VALLEY STD GA BK GALV HEM
VW26BK20HE
20" PREFORMED VALLEY STD GA BK GALV HEM
EACH
EACH
EACH
11
12
13
12
Return to Index Page
PREFORMED VALLEY
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
STANDARD GAUGE MILL ALUMINUM PREFORMED VALLEY
GUT310
14" PREFORMED VALLEY STD GA MILL ALUM
GUT314
20" PREFORMED VALLEY STD GA MILL ALUM
EACH
EACH
3
4
STANDARD GAUGE BROWN ALUMINUM PREFORMED VALLEY
GUT312
14" PREFORMED VALLEY STD GA BR ALUM
GUT316
20" PREFORMED VALLEY STD GA BR ALUM
EACH
EACH
3
4
STANDARD GAUGE BLACK ALUMINUM PREFORMED VALLEY
GUT315
20" PREFORMED VALLEY STD GA BK ALUM
EACH
4
PACKAGING
WEIGHT
ROOF TRIM
PRODUCT NO.
DESCRIPTION
F 4.5 DRIP EDGE
EDWA45118
EDBK45118
EDMF45118
EDWA45112
EDBK45112
ED29WH45118
EDS45118
EDBA45118
EDBA45112
ED29BR45118
F 4.5 WH ALUM
F 4.5 BK ALUM
F 4.5 MILL ALUM
F 4.5 WH ALUM PREMIUM
F 4.5 BK ALUM PREMIUM
F 4.5 WH GALV
F 4.5 GALV
F 4.5 BR ALUM
F 4.5 BR ALUM PREMIUM
F 4.5 BR GALV
50
50
50
50
50
25
25
50
50
25
31
31
31
37
37
45
37
31
37
45
F 5 DRIP EDGE
EDWA50112
EDBK50112
EDS50112
ED29WH50112
EDBA50112
F 5 WH ALUM PREMIUM
F 5 BK ALUM PREMIUM
F 5 GALV
F 5 WH GALV
F 5 BR ALUM PREMIUM
50
50
25
25
50
43
43
40
45
43
FLF 5 DRIP EDGE (SMOOTH AND EMBOSSED HE)
EDWASM189
FLF 5 WH ALUM PREMIUM
EDBASM195
FLF 5 BR ALUM PREMIUM
50
50
43
43
ROOF TRIMS
REWA30112
REMF30112
RES30112
RE115
RE116
RE120
RE215
RE121
RE122
RES45112
RE126
RE125
50
50
25
50
50
50
25
50
50
25
50
50
21
21
25
24
24
24
28
31
31
37
21
21
C 3 WH ALUM
C 3 MILL ALUM
C 3 GALV
C 3.5 WH ALUM
C 3.5 BR ALUM
C 3.5 MILL ALUM
C 3.5 GALV
C 4.5 WH ALUM
C 4.5 BR ALUM
C 4.5 GALV
D 3 WH ALUM
D3 BR ALUM
13
Return to Index Page
ROOF TRIM
PRODUCT NO.
PACKAGING
WEIGHT
50
25
50
25
50
50
50
21
25
21
25
28
31
52
PACKAGING
WEIGHT
ECONOMY GAUGE GALVANIZED ROOF EDGE
RES30100
3" ROOF EDGE 1" FACE GALV
RES30112
3" ROOF EDGE 1.5" FACE GALV
RES40200
4" ROOF EDGE 2" FACE GALV
RES45112
4.5" ROOF EDGE 1.5" FACE GALV
RES45300
4.5" ROOF EDGE 3" FACE GALV
RES50212
5" ROOF EDGE 2.5" FACE GALV
50
25
25
25
25
25
50
25
33
37
37
41
STANDARD GAUGE GALVANIZED ROOF EDGE
RE2930100
3" ROOF EDGE 1" FACE STD GA GALV
RE2930112
3" ROOF EDGE 1.5" FACE STD GA GALV
RE2940200
4" ROOF EDGE 2" FACE STD GA GALV
RE2945112
4.5" ROOF EDGE 1.5" FACE STD GA GALV
RE2945300
4.5" ROOF EDGE 3" FACE STD GA GALV
RE2950212
5" ROOF EDGE 2.5" FACE STD GA GALV
RE2960300
6" ROOF EDGE 3" FACE STD GA GALV
50
25
25
25
25
25
25
60
30
40
45
45
50
60
26 GAUGE GALVANIZED ROOF EDGE
RE2630100
3" ROOF EDGE 1" FACE 26 GA GALV
RE2630112
3" ROOF EDGE 1.5" FACE 26 GA GALV
RE2640200
4" ROOF EDGE 2" FACE 26 GA GALV
RE2645112
4.5" ROOF EDGE 1.5" FACE 26 GA GALV
RE2645300
4.5" ROOF EDGE 3" FACE 26 GA GALV
RE2650212
5" ROOF EDGE 2.5" FACE 26 GA GALV
RE2660300
6" ROOF EDGE 3" FACE 26 GA GALV
50
25
25
25
25
25
25
97
48
64
73
73
81
97
STANDARD GAUGE BROWN GALVANIZED ROOF EDGE
RE29BR30100
3" ROOF EDGE 1" FACE STD GA BR GALV
RE29BR30112
3" ROOF EDGE 1.5" FACE STD GA BR GALV
RE29BR40200
4" ROOF EDGE 2" FACE STD GA BR GALV
RE29BR45112
4.5" ROOF EDGE 1.5" FACE STD GA BR GALV
RE29BR45300
4.5" ROOF EDGE 3" FACE STD GA BR GALV
RE29BR50212
5" ROOF EDGE 2.5" FACE STD GA BR GALV
RE29BR60300
6" ROOF EDGE 3" FACE STD GA BR GALV
50
25
25
25
25
25
25
60
30
40
45
45
50
60
ROOF TRIMS
RE127
RE223
RE135
RE229
RE136
RE130
RE137
DESCRIPTION
D 3 MILL ALUM
D 3 GALV
E 3 WH ALUM
E 3 GALV
E 3.5 WH ALUM
E 4.5 WH ALUM
E 6 WH ALUM
Did you know that we have full line of Brick Lintels, Mill Angle and Block Lintels?
See Page: 30
ROOF EDGE
PRODUCT NO.
DESCRIPTION
14
Return to Index Page
ROOF EDGE
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
26 GAUGE BROWN GALVANIZED ROOF EDGE
RE26BR30100
3" ROOF EDGE 1" FACE 26 GA BR GALV
RE26BR30112
3" ROOF EDGE 1.5" FACE 26 GA BR GALV
RE26BR40200
4" ROOF EDGE 2" FACE 26 GA BR GALV
RE26BR45112
4.5" ROOF EDGE 1.5" FACE 26 GA BR GALV
RE26BR45300
4.5" ROOF EDGE 3" FACE 26 GA BR GALV
RE26BR50212
5" ROOF EDGE 2.5" FACE 26 GA BR GALV
RE26BR60300
6" ROOF EDGE 3" FACE 26 GA BR GALV
50
25
25
25
25
25
25
97
48
64
73
73
81
97
STANDARD GAUGE WHITE GALVANIZED ROOF EDGE
RE29WH30100
3" ROOF EDGE 1" FACE STD GA WH GALV
RE29WH30112
3" ROOF EDGE 1.5" FACE STD GA WH GALV
RE29WH40200
4" ROOF EDGE 2" FACE STD GA WH GALV
RE29WH45112
4.5" ROOF EDGE 1.5" FACE STD GA WH GALV
RE29WH45300
4.5" ROOF EDGE 3" FACE STD GA WH GALV
RE29WH50212
5" ROOF EDGE 2.5" FACE STD GA WH GALV
RE29WH60300
6" ROOF EDGE 3" FACE STD GA WH GALV
50
25
25
25
25
25
25
60
30
40
45
45
50
60
26 GAUGE WHITE GALVANIZED ROOF EDGE
RE26WH30100
3" ROOF EDGE 1" FACE 26 GA WH GALV
RE26WH30112
3" ROOF EDGE 1.5" FACE 26 GA WH GALV
RE26WH40200
4" ROOF EDGE 2" FACE 26 GA WH GALV
RE26WH45112
4.5" ROOF EDGE 1.5" FACE 26 GA WH GALV
RE26WH45300
4.5" ROOF EDGE 3" FACE 26 GA WH GALV
RE26WH50212
5" ROOF EDGE 2.5" FACE 26 GA WH GALV
RE26WH60300
6" ROOF EDGE 3" FACE 26 GA WH GALV
50
25
25
25
25
25
25
97
48
64
73
73
81
97
26 GAUGE BLACK GALVANIZED ROOF EDGE
RE26BK30100
3" ROOF EDGE 1" FACE 26 GA BK GALV
RE26BK30112
3" ROOF EDGE 1.5" FACE 26 GA BK GALV
RE26BK40200
4" ROOF EDGE 2" FACE 26 GA BK GALV
RE26BK45112
4.5" ROOF EDGE 1.5" FACE 26 GA BK GALV
RE26BK45300
4.5" ROOF EDGE 3" FACE 26 GA BK GALV
RE26BK50212
5" ROOF EDGE 2.5" FACE 26 GA BK GALV
RE26BK60300
6" ROOF EDGE 3" FACE 26 GA BK GALV
50
25
25
25
25
25
25
97
48
64
73
73
81
97
26 GAUGE GRAY GALVANIZED ROOF EDGE
RE26GR30100
3" ROOF EDGE 1" FACE 26 GA GR GALV
RE26GR30112
3" ROOF EDGE 1.5" FACE 26 GA GR GALV
RE26GR40200
4" ROOF EDGE 2" FACE 26 GA GR GALV
RE26GR45112
4.5" ROOF EDGE 1.5" FACE 26 GA GR GALV
RE26GR45300
4.5" ROOF EDGE 3" FACE 26 GA GR GALV
RE26GR50212
5" ROOF EDGE 2.5" FACE 26 GA GR GALV
RE26GR60300
6" ROOF EDGE 3" FACE 26 GA GR GALV
50
25
25
25
25
25
25
97
48
64
73
73
81
97
STANDARD GAUGE PAINTED & MILL ALUMINUM ROOF EDGE
REBA30112
3" ROOF EDGE 1.5" FACE STD GA BR ALUM
REWA30112
3" ROOF EDGE 1.5" FACE STD GA WH ALUM
REMF30112
3" ROOF EDGE 1.5" FACE STD GA MILL ALUM
50
50
50
21
21
21
ON THE WEB WWW.FLAMCO.COM
15
Return to Index Page
ROOF EDGE
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
25
25
25
25
23
23
23
23
PACKAGING
WEIGHT
ECONOMY GAUGE GALVANIZED EAVE DRIP
EDS40118
4" EAVE DRIP 1.125" FACE GALV
EDS45118
4.5" EAVE DRIP 1.125" FACE GALV
EDS45112
4.5" EAVE DRIP 1.5" FACE GALV
EDS50112
5" EAVE DRIP 1.5" FACE GALV
EDS50212
5" EAVE DRIP 2.5" FACE GALV
EDS60212
6" EAVE DRIP 2.5" FACE GALV
25
25
25
25
25
25
33
37
37
41
41
50
STANDARD GAUGE GALVANIZED EAVE DRIP
ED2940118
4" EAVE DRIP 1.125" FACE STD GA GALV
ED2945118
4.5" EAVE DRIP 1.125" FACE STD GA GALV
ED2945112
4.5" EAVE DRIP 1.5" FACE STD GA GALV
ED2950112
5" EAVE DRIP 1.5" FACE STD GA GALV
ED2950212
5" EAVE DRIP 2.5" FACE STD GA GALV
25
25
25
25
25
40
45
45
50
50
26 GAUGE GALVANIZED EAVE DRIP
ED2640118
4" EAVE DRIP 1.125" FACE 26 GA GALV
ED2645118
4.5" EAVE DRIP 1.125" FACE 26 GA GALV
ED2645112
4.5" EAVE DRIP 1.5" FACE 26 GA GALV
ED2650112
5" EAVE DRIP 1.5" FACE 26 GA GALV
ED2650212
5" EAVE DRIP 2.5" FACE 26 GA GALV
ED2660212
6" EAVE DRIP 2.5" FACE 26 GA GALV
25
25
25
25
25
25
65
73
73
81
81
97
STANDARD GAUGE BROWN GALVANIZED EAVE DRIP
ED29BR40118
4" EAVE DRIP 1.125" FACE STD GA BR GALV
ED29BR45118
4.5" EAVE DRIP 1.125" FACE STD GA BR GALV
ED29BR45112
4.5" EAVE DRIP 1.5" FACE STD GA BR GALV
ED29BR50112
5" EAVE DRIP 1.5" FACE STD GA BR GALV
ED29BR50212
5" EAVE DRIP 2.5" FACE STD GA BR GALV
ED29BR60212
6" EAVE DRIP 2.5" FACE STD GA BR GALV
25
25
25
25
25
25
40
45
45
50
50
60
26 GAUGE BROWN GALVANIZED EAVE DRIP
ED26BR40118
4" EAVE DRIP 1.125" FACE 26 GA BR GALV
ED26BR45118
4.5" EAVE DRIP 1.125" FACE 26 GA BR GALV
ED26BR45112
4.5" EAVE DRIP 1.5" FACE 26 GA BR GALV
ED26BR50112
5" EAVE DRIP 1.5" FACE 26 GA BR GALV
ED26BR50212
5" EAVE DRIP 2.5" FACE 26 GA BR GALV
ED26BR60212
6" EAVE DRIP 2.5" FACE 26 GA BR GALV
25
25
25
25
25
25
65
73
73
81
81
97
.019 GAUGE PAINTED ALUMINUM ROOF EDGE
REBA40200
4" ROOF EDGE 2" FACE .019 BR ALUM
REBA60300
6" ROOF EDGE 3" FACE .019 BR ALUM
REWA40200
4" ROOF EDGE 2" FACE .019 WH ALUM
REWA60300
6" ROOF EDGE 3" FACE .019 WH ALUM
EAVE METAL AND FLASHINGS
PRODUCT NO.
DESCRIPTION
16
Return to Index Page
EAVE METAL AND FLASHINGS
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
STANDARD GAUGE WHITE GALVANIZED EAVE DRIP
ED29WH40118
4" EAVE DRIP 1.125" FACE STD GA WH GALV
ED29WH45118
4.5" EAVE DRIP 1.125" FACE STD GA WH GALV
ED29WH45112
4.5" EAVE DRIP 1.5" FACE STD GA WH GALV
ED29WH50112
5" EAVE DRIP 1.5" FACE STD GA WH GALV
ED29WH50212
5" EAVE DRIP 2.5" FACE STD GA WH GALV
ED29WH60212
6" EAVE DRIP 2.5" FACE STD GA WH GALV
25
25
25
25
25
25
40
45
45
50
50
60
26 GAUGE WHITE GALVANIZED EAVE DRIP
ED26WH40118
4" EAVE DRIP 1.125" FACE 26 GA WH GALV
ED26WH45118
4.5" EAVE DRIP 1.125" FACE 26 GA WH GALV
ED26WH45112
4.5" EAVE DRIP 1.5" FACE 26 GA WH GALV
ED26WH50112
5" EAVE DRIP 1.5" FACE 26 GA WH GALV
ED26WH50212
5" EAVE DRIP 2.5" FACE 26 GA WH GALV
ED26WH60212
6" EAVE DRIP 2.5" FACE 26 GA WH GALV
25
25
25
25
25
25
65
73
73
81
81
97
26 GAUGE BLACK GALVANIZED EAVE DRIP
ED26BK40118
4" EAVE DRIP 1.125" FACE 26 GA BK GALV
ED26BK45118
4.5" EAVE DRIP 1.125" FACE 26 GA BK GALV
ED26BK45112
4.5" EAVE DRIP 1.5" FACE 26 GA BK GALV
ED26BK50112
5" EAVE DRIP 1.5" FACE 26 GA BK GALV
ED26BK50212
5" EAVE DRIP 2.5" FACE 26 GA BK GALV
ED26BK60212
6" EAVE DRIP 2.5" FACE 26 GA BK GALV
25
25
25
25
25
25
65
73
73
81
81
97
26 GAUGE GRAY GALVANIZED EAVE DRIP
ED26GR40118
4" EAVE DRIP 1.125" FACE 26 GA GR GALV
ED26GR45118
4.5" EAVE DRIP 1.125" FACE 26 GA GR GALV
ED26GR45112
4.5" EAVE DRIP 1.5" FACE 26 GA GR GALV
ED26GR50112
5" EAVE DRIP 1.5" FACE 26 GA GR GALV
ED26GR50212
5" EAVE DRIP 2.5" FACE 26 GA GR GALV
ED26GR60212
6" EAVE DRIP 2.5" FACE 26 GA GR GALV
25
25
25
25
25
25
65
73
73
81
81
97
STANDARD GAUGE PAINTED & MILL ALUMINUM EAVE DRIP
EDBA45118
4.5" EAVE DRIP 1.125" FACE STD GA BR ALUM
EDBK45118
4.5" EAVE DRIP 1.125" FACE STD GA BK ALUM
EDWA45118
4.5" EAVE DRIP 1.125" FACE STD GA WH ALUM
EDMF45118
4.5" EAVE DRIP 1.125" FACE STD GA MILL ALUM
50
50
50
50
31
31
31
31
.019 GAUGE PAINTED ALUMINUM EAVE DRIP
EDBA50112
5" EAVE DRIP 1.5" FACE .019 BR ALUM
EDBA60212
6" EAVE DRIP 2.5" FACE .019 BR ALUM
EDWA50112
5" EAVE DRIP 1.5" FACE .019 WH ALUM
EDWA60212
6" EAVE DRIP 2.5" FACE .019 WH ALUM
25
25
25
25
35
35
35
35
PACKAGING
WEIGHT
25
25
25
41
50
50
GRAVEL STOP
PRODUCT NO.
DESCRIPTION
ECONOMY GAUGE GALVANIZED CLOSED GRAVEL STOP
CGS50178
5" CLOSED GRAVEL STOP 1.875" FACE GALV
CGS60212
6" CLOSED GRAVEL STOP 2.5" FACE GALV
CGS60258
6" CLOSED GRAVEL STOP 2.625" FACE GALV
17
Return to Index Page
GRAVEL STOP
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
STANDARD GAUGE GALVANIZED CLOSED GRAVEL STOP
CG2950178
5" CLOSED GRAVEL STOP 1.875" FACE STD GA GALV
CG2960212
6" CLOSED GRAVEL STOP 2.5" FACE STD GA GALV
CG2960258
6" CLOSED GRAVEL STOP 2.625" FACE STD GA GALV
CG2970312
7" CLOSED GRAVEL STOP 3.5" FACE STD GA GALV
25
25
25
25
50
60
60
70
26 GAUGE GALVANIZED CLOSED GRAVEL STOP
CG2650178
5" CLOSED GRAVEL STOP 1.875" FACE 26 GA GALV
CG2660212
6" CLOSED GRAVEL STOP 2.5" FACE 26 GA GALV
CG2660258
6" CLOSED GRAVEL STOP 2.625" FACE 26 GA GALV
CG2670312
7" CLOSED GRAVEL STOP 3.5" FACE 26 GA GALV
25
25
25
25
81
97
97
113
STANDARD GAUGE BROWN GALVANIZED CLOSED GRAVEL STOP
CG29BR50178
5" CLOSED GRAVEL STOP 1.875" FACE STD GA BR GALV
CG29BR60212
6" CLOSED GRAVEL STOP 2.5" FACE STD GA BR GALV
CG29BR60258
6" CLOSED GRAVEL STOP 2.625" FACE STD GA BR GALV
CG29BR70312
7" CLOSED GRAVEL STOP 3.5" FACE STD GA BR GALV
25
25
25
25
50
60
60
70
STANDARD GAUGE WHITE GALVANIZED CLOSED GRAVEL STOP
CG29WH50178
5" CLOSED GRAVEL STOP 1.875" FACE STD GA WH GALV
CG29WH60212
6" CLOSED GRAVEL STOP 2.5" FACE STD GA WH GALV
CG29WH60258
6" CLOSED GRAVEL STOP 2.625" FACE STD GA WH GALV
CG29WH70312
7" CLOSED GRAVEL STOP 3.5" FACE STD GA WH GALV
25
25
25
25
50
60
60
70
26 GAUGE BROWN GALVANIZED CLOSED GRAVEL STOP
CG26BR50178
5" CLOSED GRAVEL STOP 1.875" FACE 26 GA BR GALV
CG26BR60212
6" CLOSED GRAVEL STOP 2.5" FACE 26 GA BR GALV
CG26BR60258
6" CLOSED GRAVEL STOP 2.625" FACE 26 GA BR GALV
CG26BR70312
7" CLOSED GRAVEL STOP 3.5" FACE 26 GA BR GALV
25
25
25
25
81
97
97
113
26 GAUGE BLACK GALVANIZED CLOSED GRAVEL STOP
CG26BK50178
5" CLOSED GRAVEL STOP 1.875" FACE 26 GA BK GALV
CG26BK60212
6" CLOSED GRAVEL STOP 2.5" FACE 26 GA BK GALV
CG26BK60258
6" CLOSED GRAVEL STOP 2.625" FACE 26 GA BK GALV
CG26BK70312
7" CLOSED GRAVEL STOP 3.5" FACE 26 GA BK GALV
25
25
25
25
81
97
97
113
26 GAUGE GRAY GALVANIZED CLOSED GRAVEL STOP
CG26GR50178
5" CLOSED GRAVEL STOP 1.875" FACE 26 GA GR GALV
CG26GR60212
6" CLOSED GRAVEL STOP 2.5" FACE 26 GA GR GALV
CG26GR60258
6" CLOSED GRAVEL STOP 2.625" FACE 26 GA GR GALV
CG26GR70312
7" CLOSED GRAVEL STOP 3.5" FACE 26 GA GR GALV
25
25
25
25
81
97
97
113
26 GAUGE WHITE GALVANIZED CLOSED GRAVEL STOP
CG26WH50178
5" CLOSED GRAVEL STOP 1.875" FACE 26 GA WH GALV
CG26WH60212
6" CLOSED GRAVEL STOP 2.5" FACE 26 GA WH GALV
CG26WH60258
6" CLOSED GRAVEL STOP 2.625" FACE 26 GA WH GALV
CG26WH70312
7" CLOSED GRAVEL STOP 3.5" FACE 26 GA WH GALV
25
25
25
25
81
97
97
113
18
Return to Index Page
GRAVEL STOP
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
ECONOMY GAUGE GALVANIZED OPEN GRAVEL STOP
OGS50258
5" OPEN GRAVEL STOP 2.625" FACE GALV
OGS60258
6" OPEN GRAVEL STOP 2.625" FACE GALV
OGS60300
6" OPEN GRAVEL STOP 3" FACE GALV
OGS70312
7" OPEN GRAVEL STOP 3.5" FACE GALV
OGS80412
8" OPEN GRAVEL STOP 4.5" FACE GALV
OGS80500
8" OPEN GRAVEL STOP 5" FACE GALV
25
25
25
25
25
25
41
50
50
58
66
66
STANDARD GAUGE GALVANIZED OPEN GRAVEL STOP
OG2950258
5" OPEN GRAVEL STOP 2.625" FACE STD GA GALV
OG2960258
6" OPEN GRAVEL STOP 2.625" FACE STD GA GALV
OG2960300
6" OPEN GRAVEL STOP 3" FACE STD GA GALV
OG2970312
7" OPEN GRAVEL STOP 3.5" FACE STD GA GALV
OG2980412
8" OPEN GRAVEL STOP 4.5" FACE STD GA GALV
OG2980500
8" OPEN GRAVEL STOP 5" FACE STD GA GALV
25
25
25
25
25
25
50
60
60
70
80
80
26 GAUGE GALVANIZED OPEN GRAVEL STOP
OG2650258
5" OPEN GRAVEL STOP 2.625" FACE 26 GA GALV
OG2660258
6" OPEN GRAVEL STOP 2.625" FACE 26 GA GALV
OG2660300
6" OPEN GRAVEL STOP 3" FACE 26 GA GALV
OG2670312
7" OPEN GRAVEL STOP 3.5" FACE 26 GA GALV
OG2680412
8" OPEN GRAVEL STOP 4.5" FACE 26 GA GALV
OG2680500
8" OPEN GRAVEL STOP 5" FACE 26 GA GALV
25
25
25
25
25
25
81
97
97
113
129
129
STANDARD GAUGE BROWN GALVANIZED OPEN GRAVEL STOP
OG29BR50258
5" OPEN GRAVEL STOP 2.625" FACE STD GA BR GALV
OG29BR60258
6" OPEN GRAVEL STOP 2.625" FACE STD GA BR GALV
OG29BR60300
6" OPEN GRAVEL STOP 3" FACE STD GA BR GALV
OG29BR70312
7" OPEN GRAVEL STOP 3.5" FACE STD GA BR GALV
OG29BR80412
8" OPEN GRAVEL STOP 4.5" FACE STD GA BR GALV
OG29BR80500
8" OPEN GRAVEL STOP 5" FACE STD GA BR GALV
25
25
25
25
25
25
50
60
60
70
80
80
STANDARD GAUGE BROWN GALVANIZED OPEN GRAVEL STOP
OG29BR50258
5" OPEN GRAVEL STOP 2.625" FACE STD GA BR GALV
OG29BR60258
6" OPEN GRAVEL STOP 2.625" FACE STD GA BR GALV
OG29BR60300
6" OPEN GRAVEL STOP 3" FACE STD GA BR GALV
OG29BR70312
7" OPEN GRAVEL STOP 3.5" FACE STD GA BR GALV
OG29BR80412
8" OPEN GRAVEL STOP 4.5" FACE STD GA BR GALV
OG29BR80500
8" OPEN GRAVEL STOP 5" FACE STD GA BR GALV
25
25
25
25
25
25
50
60
60
70
80
80
STANDARD GAUGE WHITE GALVANIZED OPEN GRAVEL STOP
OG29WH50258
5" OPEN GRAVEL STOP 2.625" FACE STD GA WH GALV
OG29WH60258
6" OPEN GRAVEL STOP 2.625" FACE STD GA WH GALV
OG29WH60300
6" OPEN GRAVEL STOP 3" FACE STD GA WH GALV
OG29WH70312
7" OPEN GRAVEL STOP 3.5" FACE STD GA WH GALV
OG29WH80412
8" OPEN GRAVEL STOP 4.5" FACE STD GA WH GALV
OG29WH80500
8" OPEN GRAVEL STOP 5" FACE STD GA WH GALV
25
25
25
25
25
25
50
60
60
70
80
80
SPECIAL ORDERS AVAILABLE UPON REQUEST!
1-800-634-3937
19
Return to Index Page
GRAVEL STOP
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
26 GAUGE BROWN GALVANIZED OPEN GRAVEL STOP
OG26BR50258
5" OPEN GRAVEL STOP 2.625" FACE 26 GA BR GALV
OG26BR60258
6" OPEN GRAVEL STOP 2.625" FACE 26 GA BR GALV
OG26BR60300
6" OPEN GRAVEL STOP 3" FACE 26 GA BR GALV
OG26BR70312
7" OPEN GRAVEL STOP 3.5" FACE 26 GA BR GALV
OG26BR80412
8" OPEN GRAVEL STOP 4.5" FACE 26 GA BR GALV
OG26BR80500
8" OPEN GRAVEL STOP 5" FACE 26 GA BR GALV
25
25
25
25
25
25
81
97
97
113
129
129
26 GAUGE BLACK GALVANIZED OPEN GRAVEL STOP
OG26BK50258
5" OPEN GRAVEL STOP 2.625" FACE 26 GA BK GALV
OG26BK60258
6" OPEN GRAVEL STOP 2.625" FACE 26 GA BK GALV
OG26BK60300
6" OPEN GRAVEL STOP 3" FACE 26 GA BK GALV
OG26BK70312
7" OPEN GRAVEL STOP 3.5" FACE 26 GA BK GALV
OG26BK80412
8" OPEN GRAVEL STOP 4.5" FACE 26 GA BK GALV
OG26BK80500
8" OPEN GRAVEL STOP 5" FACE 26 GA BK GALV
25
25
25
25
25
25
81
97
97
113
129
129
26 GAUGE GRAY GALVANIZED OPEN GRAVEL STOP
OG26GR50258
5" OPEN GRAVEL STOP 2.625" FACE 26 GA GR GALV
OG26GR60258
6" OPEN GRAVEL STOP 2.625" FACE 26 GA GR GALV
OG26GR60300
6" OPEN GRAVEL STOP 3" FACE 26 GA GR GALV
OG26GR70312
7" OPEN GRAVEL STOP 3.5" FACE 26 GA GR GALV
OG26GR80412
8" OPEN GRAVEL STOP 4.5" FACE 26 GA GR GALV
OG26GR80500
8" OPEN GRAVEL STOP 5" FACE 26 GA GR GALV
25
25
25
25
25
25
81
97
97
113
129
129
26 GAUGE WHITE GALVANIZED OPEN GRAVEL STOP
OG26WH50258
5" OPEN GRAVEL STOP 2.625" FACE 26 GA WH GALV
OG26WH60258
6" OPEN GRAVEL STOP 2.625" FACE 26 GA WH GALV
OG26WH60300
6" OPEN GRAVEL STOP 3" FACE 26 GA WH GALV
OG26WH70312
7" OPEN GRAVEL STOP 3.5" FACE 26 GA WH GALV
OG26WH80412
8" OPEN GRAVEL STOP 4.5" FACE 26 GA WH GALV
OG26WH80500
8" OPEN GRAVEL STOP 5" FACE 26 GA WH GALV
25
25
25
25
25
25
81
97
97
113
129
129
GRAVEL STOP
OG184
OGS50258
OG161
OG160
OG256
50
25
50
50
25
43
50
45
45
53
PACKAGING
WEIGHT
20
20
20
20
20
20
20
20
20
46
53
56
60
66
66
70
80
80
H 5 WH ALUM
H 5 GALV
H 5.5 WH ALUM
H 5.5 MILL ALUM
H 5.5 GALV
ANGLE FLASHING
PRODUCT NO.
DESCRIPTION
ECONOMY GAUGE GALVANIZED ANGLE FLASHING
AFS30355
3" X 3.5" X .5" ANGLE FLASH GALV HEM
AFS4040
4" X 4" ANGLE FLASH GALV
AFS40405
4" X 4" X .5" ANGLE FLASH GALV HEM
AFS4050
4" X 5" ANGLE FLASH GALV
AFS4060
4" X 6" ANGLE FLASH GALV
AFS5050
5" X 5" ANGLE FLASH GALV
AFS50505
5" X 5" X .5" ANGLE FLASH GALV HEM
AFS5070
5" X 7" ANGLE FLASH GALV
AFS6060
6" X 6" ANGLE FLASH GALV
20
Return to Index Page
ANGLE FLASHING
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
STANDARD GAUGE GALVANIZED ANGLE FLASHING
AF2930355
3" X 3.5" X .5" ANGLE FLASH STD GA GALV HEM
AF294040
4" X 4" ANGLE FLASH STD GA GALV
AF2940405
4" X 4" X .5" ANGLE FLASH STD GA GALV HEM
AF294050
4" X 5" ANGLE FLASH STD GA GALV
AF294060
4" X 6" ANGLE FLASH STD GA GALV
AF295050
5" X 5" ANGLE FLASH STD GA GALV
AF2950505
5" X 5" X .5" ANGLE FLASH STD GA GALV HEM
AF295070
5" X 7" ANGLE FLASH STD GA GALV
AF296060
6" X 6" ANGLE FLASH STD GA GALV
20
20
20
20
20
20
20
20
20
56
64
68
72
80
80
84
96
96
26 GAUGE GALVANIZED ANGLE FLASHING
AF2630355
3" X 3.5" X .5" ANGLE FLASH 26 GA GALV HEM
AF264040
4" X 4" ANGLE FLASH 26 GA GALV
AF2640405
4" X 4" X .5" ANGLE FLASH 26 GA GALV HEM
AF264050
4" X 5" ANGLE FLASH 26 GA GALV
AF264060
4" X 6" ANGLE FLASH 26 GA GALV
AF265050
5" X 5" ANGLE FLASH 26 GA GALV
AF2650505
5" X 5" X .5" ANGLE FLASH 26 GA GALV HEM
AF265070
5" X 7" ANGLE FLASH 26 GA GALV
AF266060
6" X 6" ANGLE FLASH 26 GA GALV
AF2650601
5" X 6" X 1" ANGLE FLASH 26 GA GALV HEM
20
20
20
20
20
20
20
20
20
20
90
102
109
115
128
128
134
154
154
154
PACKAGING
WEIGHT
STANDARD GAUGE GALVANIZED APRON FLASHING
APF2975
7.5" APRON FLASH STD GA GALV
APF2980
8" APRON FLASH STD GA GALV
20
20
60
64
26 GAUGE GALVANIZED APRON FLASHING
APF2675
7.5" APRON FLASH 26 GA GALV
APF2960
8" APRON FLASH 26 GA GALV
20
20
97
103
APRON FLASHING
PRODUCT NO.
DESCRIPTION
TILE FLASHINGS
AVAILABLE IN GALVANIZED, GALVALUME, ALUMINUM AND COPPER
TMRA2630
TMRA2640
TMRA2650
TMRA2660
3" TILE METAL RIDGE ANCHOR
4" TILE METAL RIDGE ANCHOR
5" TILE METAL RIDGE ANCHOR
6" TILE METAL RIDGE ANCHOR
1
1
1
1
6
10
11
12
AF2650601
5" X 6" X 1" ANGLE FLASH TILE 26 GA GALV
20
154
VW2618HE
VW2624HE
18" PREFORMED TILE VALLEY HEM 26 GALV
24" PREFORMED TILE VALLEY HEM 26 GALV
1
1
11
15
AVAILBLE IN PAINTED
21
Return to Index Page
STEP FLASHING
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
ECONOMY GAUGE GALVANIZED STEP FLASHING
STPS237
2" X 3" X 7" BENT STEP FLASH GALV
STPS507
5" X 7" FLAT STEP FLASH GALV
100
100
10
10
STANDARD GAUGE GALVANIZED STEP FLASHING
STP29237
2" X 3" X 7" BENT STEP FLASH STD GA GALV
STP29507
5" X 7" FLAT STEP FLASH STD GALV
100
100
12
12
26 GAUGE GALVANIZED STEP FLASHING
STP26237
2" X 3" X 7" BENT STEP FLASH 26 GA GALV
STP26507
5" X 7" FLAT STEP FLASH 26 GALV
100
100
19
19
ECONOMY GAUGE MILL ALUMINUM STEP FLASHING
STPAE25257
2.5" X 2.5" X 7" BENT STEP FLASH MILL ALUM
STPAE237
2" X 3" X 7" BENT STEP FLASH MILL ALUM
STPAE507
5" X 7" FLAT STEP FLASH MILL ALUM
STPAE447
4" X 4" X 7" BENT STEP FLASH MILL ALUM
500
500
500
500
15
15
15
20
STANDARD GAUGE MILL ALUMINUM STEP FLASHING
STPAS237
2" X 3" X 7" BENT STEP FLASH STD GA MILL ALUM
STPAS507
5" X 7" FLAT STEP FLASH STD GA MILL ALUM
STPAS707
7" X 7" FLAT STEP FLASH STD GA MILL ALUM
100
100
500
4
4
29
ECONOMY GAUGE ALUMINUM STEP FLASHING FORMED
STPBA237-500
5" X 7" FORMED STEP FLASH BR ALUM
STPBK237-500
5" X 7" FORMED STEP FLASH BK ALUM
STPMF347
7" X 7" FORMED STEP FLASH MILL ALUM
500
500
500
26
26
29
PACKAGING
WEIGHT
ECONOMY GAUGE GALVANIZED RIDGE ROLL
RRS10
10" RIDGE ROLL GALV
RRS12
12" RIDGE ROLL GALV
RRS14
14" RIDGE ROLL GALV
10
10
10
33
40
46
STANDARD GAUGE GALVANIZED RIDGE ROLL
RR2910
10" RIDGE ROLL STD GA GALV
RR2912
12" RIDGE ROLL STD GA GALV
RR2914
14" RIDGE ROLL STD GA GALV
RR2916
16" RIDGE ROLL STD GA GALV
RR2918
18" RIDGE ROLL STD GA GALV
RR2920
20" RIDGE ROLL STD GA GALV
10
10
10
10
10
10
40
48
56
64
72
80
26 GAUGE GALVANIZED RIDGE ROLL
RR2610
10" RIDGE ROLL 26 GA GALV
RR2612
12" RIDGE ROLL 26 GA GALV
RR2614
14" RIDGE ROLL 26 GA GALV
RR2616
16" RIDGE ROLL 26 GA GALV
RR2618
18" RIDGE ROLL 26 GA GALV
RR2620
20" RIDGE ROLL 26 GA GALV
10
10
10
10
10
10
40
48
56
64
72
80
RIDGE ROLL
PRODUCT NO.
DESCRIPTION
22
Return to Index Page
RIDGE CAP
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
ECONOMY GAUGE GALVANIZED RIDGE CAP
RCS10
10" RIDGE CAP GALV
RCS12
12" RIDGE CAP GALV
RCS14
14" RIDGE CAP GALV
10
10
10
33
40
46
STANDARD GAUGE GALVANIZED RIDGE CAP
RC2910
10" RIDGE CAP STD GA GALV
RC2912
12" RIDGE CAP STD GA GALV
RC2914
14" RIDGE CAP STD GA GALV
RC2916
16" RIDGE CAP STD GA GALV
RC2918
18" RIDGE CAP STD GA GALV
RC2920
20" RIDGE CAP STD GA GALV
10
10
10
10
10
10
40
48
56
64
72
80
26 GAUGE GALVANIZED RIDGE CAP
RC2610
10" RIDGE CAP 26 GA GALV
RC2612
12" RIDGE CAP 26 GA GALV
RC2614
14" RIDGE CAP 26 GA GALV
RC2616
16" RIDGE CAP 26 GA GALV
RC2618
18" RIDGE CAP 26 GA GALV
RC2620
20" RIDGE CAP 26 GA GALV
10
10
10
10
10
10
64
76
89
102
115
128
PACKAGING
WEIGHT
ECONOMY GAUGE GALVANIZED Z FLASHING
FZS30716
7/16" Z FLASH GALV
FZS3012
1/2" Z FLASH GALV
FZS3058
5/8" Z FLASH GALV
FZS3034
3/4" Z FLASH GALV
25
25
25
25
25
25
25
25
STANDARD GAUGE GALVANIZED Z FLASHING
FZ2930716
7/16" Z FLASH STD GA GALV
FZ293012
1/2" Z FLASH STD GA GALV
FZ293058
5/8" Z FLASH STD GA GALV
FZ293034
3/4" Z FLASH STD GA GALV
25
25
25
25
30
30
30
30
26 GAUGE GALVANIZED Z FLASHING
FZ2630716
7/16" Z FLASH 26 GA GALV
FZ263012
1/2" Z FLASH 26 GA GALV
FZ263058
5/8" Z FLASH 26 GA GALV
FZ263034
3/4" Z FLASH 26 GA GALV
25
25
25
25
48
48
48
48
MILL AND PAINTED ALUMINUM Z FLASHING
FZMF3058
5/8" Z FLASH MILL ALUM
FZMF30716
7/16" Z FLASH MILL ALUM
FZBA3058
5/8" Z FLASH BR ALUM
FZBA30716
7/16" Z FLASH BR ALUM
FZWA3058
5/8" Z FLASH WH ALUM
FZWA30716
7/16" Z FLASH WH ALUM
50
50
50
50
50
50
25
25
27
27
27
27
Z FLASHING
PRODUCT NO.
DESCRIPTION
QUALITY AND SERVICE Since 1923
23
Return to Index Page
TERMITE SHIELD
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
ECONOMY GAUGE GALVANIZED TERMITE SHIELD
TSS06
6" NO. 1 TERMITE SHIELD GALV
TSS08
8" NO. 1 TERMITE SHIELD GALV
20
20
40
53
STANDARD GAUGE GALVANIZED TERMITE SHIELD
TS29061
6" NO. 1 TERMITE SHIELD STD GA GALV
TS2908
8" NO. 1 TERMITE SHIELD STD GA GALV
TS2910
10" NO. 1 TERMITE SHIELD STD GA GALV
TS2912
12" NO. 1 TERMITE SHIELD STD GA GALV
20
20
20
20
48
64
80
96
26 GAUGE GALVANIZED TERMITE SHIELD
TS26061
6" NO. 1 TERMITE SHIELD 26 GA GALV
TS2608
8" NO. 1 TERMITE SHIELD 26 GA GALV
TS2610
10" NO. 1 TERMITE SHIELD 26 GA GALV
TS2612
12" NO. 1 TERMITE SHIELD 26 GA GALV
20
20
20
20
77
102
128
154
PACKAGING
WEIGHT
ECONOMY GAUGE GALVANIZED GIRDER SHIELD
GSS06
6" NO. 2 GIRDER SHIELD GALV
GSS08
8" NO. 2 GIRDER SHIELD GALV
20
20
40
53
STANDARD GAUGE GALVANIZED GIRDER SHIELD
GS2906
6" NO. 2 GIRDER SHIELD STD GA GALV
GS2908
8" NO. 2 GIRDER SHIELD STD GA GALV
GS2910
10" NO. 2 GIRDER SHIELD STD GA GALV
GS2912
12" NO. 2 GIRDER SHIELD STD GA GALV
20
20
20
20
48
64
80
96
26 GAUGE GALVANIZED GIRDER SHIELD
GS2606
6" NO. 2 GIRDER SHIELD 26 GA GALV
GS2608
8" NO. 2 GIRDER SHIELD 26 GA GALV
GS2610
10" NO. 2 GIRDER SHIELD 26 GA GALV
GS2612
12" NO. 2 GIRDER SHIELD 26 GA GALV
20
20
20
20
48
64
80
96
PACKAGING
WEIGHT
5
5
5
5
5
5
5
5
5
5
5
35
50
65
90
110
35
50
65
90
110
25
GIRDER SHIELD
PRODUCT NO.
DESCRIPTION
GALVANIZED WINDOW WELLS
PRODUCT NO.
DESCRIPTION
GALVANIZED WINDOW WELLS
WW680
12" ROUND
WW682
18" ROUND
WW683
24" ROUND
WW684
30" ROUND
WW685
36" ROUND
WW690
12" SQUARE
WW692
18" SQUARE
WW693
24" SQUARE
WW694
30" SQUARE
WW695
36" SQUARE
WW699
12" ROUND FOUNDATION WELL
24
Return to Index Page
U TYPE JOIST HANGERS (ICB0 NO: 3701)
PRODUCT NO.
DESCRIPTION
U TYPE JOIST HANGERS (ICBO NO: 3701)
HU1824
2" X 4" U HANGER 18 GA GALV
HU18268
2" X 6" / 8" U HANGER 18 GA GALV
HU182810
2" X 8" / 10" U HANGER 18 GA GALV
HU1821012
2" X 10" / 12" U HANGER 18 GA GALV
HU182268
2-2" X 6" / 8" U HANGER 18 GA GALV
HU1822810
2-2" X 8" / 10" U HANGER 18 GA GALV
HU18221012
2-2" X 10" / 12" U HANGER 18 GA GALV
PACKAGING
WEIGHT
50
50
50
50
30
30
30
9
13
17
18
9
12
13
PACKAGING
WEIGHT
200
25
100
100
100
100
8
8
11
11
PACKAGING
WEIGHT
100
100
100
100
100
100
100
100
100
100
19
23
28
33
34
44
50
55
60
82
JOIST BRIDGING & HURRICANE ANCHORS
PRODUCT NO.
DESCRIPTION
JOIST BRIDGING
JBR16OC
16" OC JOIST BRIDGING 20 GA GALV
HURRICANE ANCHORS
HARH
RIGHT HAND HURRICANE ANCHOR 20 GA GALV
HALH
LEFT HAND HURRICANE ANCHOR 20 GA GALV
HALTR
LONG TAIL HURRICANE ANCHOR RIGHT 20 GA GALV
HALTL
LONG TAIL HURRICANE ANCHOR LEFT 20 GA GALV
RAFTER TIES
PRODUCT NO.
DESCRIPTION
14 GAUGE GALVANIZED FLAT RAFTER TIES
RTF1408
8" FLAT RAFTER TIE 14 GA GALV
RTF1410
10" FLAT RAFTER TIE 14 GA GALV
RTF1412
12" FLAT RAFTER TIE 14 GA GALV
RTF1414
14" FLAT RAFTER TIE 14 GA GALV
RTF1416
16" FLAT RAFTER TIE 14 GA GALV
RTF1418
18" FLAT RAFTER TIE 14 GA GALV
RTF1420
20" FLAT RAFTER TIE 14 GA GALV
RTF1422
22" FLAT RAFTER TIE 14 GA GALV
RTF1424
24" FLAT RAFTER TIE 14 GA GALV
RTF1436
36" FLAT RAFTER TIE 14 GA GALV
SEE PAGE 39 FOR A LIST OF MIAMI DADE COUNTY APPROVED VENTS
25
Return to Index Page
RAFTER TIES
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
14 GAUGE GALVANIZED TWISTED RAFTER TIES
RTT1408
8" TWISTED RAFTER TIE 14 GA GALV
RTT1410
10" TWISTED RAFTER TIE 14 GA GALV
RTT1412
12" TWISTED RAFTER TIE 14 GA GALV
RTT1414
14" TWISTED RAFTER TIE 14 GA GALV
RTT1416
16" TWISTED RAFTER TIE 14 GA GALV
RTT1418
18" TWISTED RAFTER TIE 14 GA GALV
RTT1420
20" TWISTED RAFTER TIE 14 GA GALV
RTT1422
22" TWISTED RAFTER TIE 14 GA GALV
RTT1424
24" TWISTED RAFTER TIE 14 GA GALV
RTT1436
36" TWISTED RAFTER TIE 14 GA GALV
100
100
100
100
100
100
100
100
100
100
19
23
28
33
34
44
50
55
60
82
18 GAUGE GALVANIZED FLAT RAFTER TIES
RTF1808
8" FLAT RAFTER TIE 18 GA GALV
RTF1810
10" FLAT RAFTER TIE 18 GA GALV
RTF1812
12" FLAT RAFTER TIE 18 GA GALV
RTF1814
14" FLAT RAFTER TIE 18 GA GALV
RTF1816
16" FLAT RAFTER TIE 18 GA GALV
RTF1818
18" FLAT RAFTER TIE 18 GA GALV
RTF1820
20" FLAT RAFTER TIE 18 GA GALV
RTF1822
22" FLAT RAFTER TIE 18 GA GALV
RTF1824
24" FLAT RAFTER TIE 18 GA GALV
RTF1836
36" FLAT RAFTER TIE 18 GA GALV
100
100
100
100
100
100
100
100
100
100
19
23
28
33
34
44
50
55
60
82
18 GAUGE GALVANIZED TWISTED RAFTER TIES
RTT1808
8" TWISTED RAFTER TIE 18 GA GALV
RTT1810
10" TWISTED RAFTER TIE 18 GA GALV
RTT1812
12" TWISTED RAFTER TIE 18 GA GALV
RTT1814
14" TWISTED RAFTER TIE 18 GA GALV
RTT1816
16" TWISTED RAFTER TIE 18 GA GALV
RTT1818
18" TWISTED RAFTER TIE 18 GA GALV
RTT1820
20" TWISTED RAFTER TIE 18 GA GALV
RTT1822
22" TWISTED RAFTER TIE 18 GA GALV
RTT1824
24" TWISTED RAFTER TIE 18 GA GALV
RTT1836
36" TWISTED RAFTER TIE 18 GA GALV
100
100
100
100
100
100
100
100
100
100
19
23
28
33
34
44
50
55
60
82
20 GAUGE GALVANIZED FLAT RAFTER TIES
RTF2008
8" FLAT RAFTER TIE 20 GA GALV
RTF2010
10" FLAT RAFTER TIE 20 GA GALV
RTF2012
12" FLAT RAFTER TIE 20 GA GALV
RTF2014
14" FLAT RAFTER TIE 20 GA GALV
RTF2016
16" FLAT RAFTER TIE 20 GA GALV
RTF2018
18" FLAT RAFTER TIE 20 GA GALV
RTF2020
20" FLAT RAFTER TIE 20 GA GALV
RTF2022
22" FLAT RAFTER TIE 20 GA GALV
RTF2024
24" FLAT RAFTER TIE 20 GA GALV
RTF2036
36" FLAT RAFTER TIE 20 GA GALV
100
100
100
100
100
100
100
100
100
100
19
24
29
33
38
43
48
52
57
86
26
Return to Index Page
RAFTER TIES
PRODUCT NO.
DESCRIPTION
20 GAUGE GALVANIZED TWISTED RAFTER TIES
RTT2008
8" TWISTED RAFTER TIE 20 GA GALV
RTT2010
10" TWISTED RAFTER TIE 20 GA GALV
RTT2012
12" TWISTED RAFTER TIE 20 GA GALV
RTT2014
14" TWISTED RAFTER TIE 20 GA GALV
RTT2016
16" TWISTED RAFTER TIE 20 GA GALV
RTT2018
18" TWISTED RAFTER TIE 20 GA GALV
RTT2020
20" TWISTED RAFTER TIE 20 GA GALV
RTT2022
22" TWISTED RAFTER TIE 20 GA GALV
RTT2024
24" TWISTED RAFTER TIE 20 GA GALV
RTT2036
36" TWISTED RAFTER TIE 20 GA GALV
PACKAGING
WEIGHT
100
100
100
100
100
100
100
100
100
100
10
12
14
16
19
21
24
26
28
43
PACKAGING
WEIGHT
20
20
52
68
PACKAGING
WEIGHT
10
10
10
10
28
33
44
53
PACKAGING
WEIGHT
50
50
68
71
250
250
250
250
250
6
6
6
6
6
PACKAGING
WEIGHT
500
500
10
15
T BRACE
PRODUCT NO.
T BRACE
TB90300
TB11334
DESCRIPTION
9' 3" T TYPE WALL BRACE 20 GA GALV
11' 3.75" T TYPE WALL BRACE 20 GA GALV
WALL BRACING
PRODUCT NO.
DESCRIPTION
WALL BRACING (ICBO NO: 3701)
WB11410
1.25" X 10' WALL BRACE 16 GA GALV
WB11412
1.25" X 12' WALL BRACE 16 GA GALV
WB20010
2" X 10' WALL BRACE 16 GA GALV
WB20012
2" X 12' WALL BRACE 16 GA GALV
H MOLDING & PLYWOOD CLIPS
PRODUCT NO.
H MOLDING
HMOLD38
HMOLD716
DESCRIPTION
3/8" H MOLD MILL ALUM
7/16" H MOLD MILL ALUM
GALVANIZED PLYWOOD CLIPS
PCS716
7/16" PLYWOOD CLIP GALV
PCS1532
15/32" PLYWOOD CLIP GALV
PCS12
1/2" PLYWOOD CLIP GALV
PCS58
5/8" PLYWOOD CLIP GALV
PCS1932
19/32" PLYWOOD CLIP GALV
INSULATION SUPPORT WIRE
PRODUCT NO.
DESCRIPTION
INSULATION SUPPORT WIRE
IS16
16" INSULATION SUPPORT
IS24
24" INSULATION SUPPORT
27
Return to Index Page
STARTER STRIP
PRODUCT NO.
STARTER STRIP
SS26PWA25
SSG25
SSG25-HEM
SSG35
DESCRIPTION
3 X 120 STARTER STRIP ALUM 2.5A
3 X 120 STARTER STRIP GALV 2.5
3 X 120 STARTER STRIP WITH HEM GALV 2.5
3 X 120 STARTER STRIP GALV 3.5
PACKAGING
WEIGHT
50
50
50
50
32
64
64
64
PACKAGING
WEIGHT
72
63
50
56
50
42
42
35
42
42
50
45
40
58
59
58
PACKAGING
WEIGHT
CORNER BEAD
PRODUCT NO.
CORNER BEAD
CB114084
CB114096-63
CB114096
CB114108
CB114120
DESCRIPTION
1.25" X 7' CORNER BEAD
1.25" X 8' CORNER BEAD
1.25" X 8' CORNER BEAD
1.25" X 9' CORNER BEAD
1.25" X 10' CORNER BEAD
BULL NOSE CORNER BEAD
CBBN096
8' BULL NOSE CORNER BEAD
CBBN108
9' BULL NOSE CORNER BEAD
CBBN120
10' BULL NOSE CONER BEAD
J, L, U BEAD & ANGLE
PRODUCT NO.
DESCRIPTION
J BEAD
JB1200096
JB1200120
JB5800096
JB5800120
1/2" X 8' J BEAD
1/2" X 10' J BEAD
5/8" X 8' J BEAD
5/8" X 10' J BEAD
63
50
63
50
52
46
52
46
L BEAD
LB1200096
LB1200120
LB5800096
LB5800120
1/2" X 8' L BEAD
1/2" X 10' L BEAD
5/8" X 8' L BEAD
5/8" X 10' L BEAD
63
50
63
50
41
41
41
41
U BEAD OR MUD TYPE L BEAD
UB5800120
5/8" X 10' U BEAD
50
63
26 GAUGE GALVANIZED 90 DEGREE ANGLE
AF261212
1.5" X 1.5" ANGLE FLASH 26 GA GALV
AF262020
2" X 2" ANGLE FLASH 26 GA GALV
25
25
45
61
PACKAGING
WEIGHT
25
25
25
25
45
70
93
117
Z INSULATION CHANNEL
PRODUCT NO.
DESCRIPTION
26 GAUGE GALVANIZED Z INSULATION AND FURRING CHANNEL
FZ26101010
1" X 1" X 1" Z FLASH 26 GA GALV
FZ26151515
1.5" X 1.5" X 1.5" Z FLASH 26 GA GALV
FZ26202020
2" X 2" X 2" Z FLASH 26 GA GALV
FZ26303030
3" X 3" X 3" Z FLASH 26 GA GALV
28
Return to Index Page
WALL TIE
PRODUCT NO.
WALL TIE
WT22SC
WT22SE
WT28SC
WT28SE
DESCRIPTION
SCALLOPED WALL TIE 22 GA GALV
STRAIGHT WALL TIE 22 GA GALV
SCALLOPED WALL TIE STD GA GALV
STRAIGHT WALL TIE STD GA GALV
PACKAGING
WEIGHT
500
500
500
500
18
28
11
15
PACKAGING
WEIGHT
100
100
15
22
PACKAGING
WEIGHT
5000
5000
5000
5000
5000
5000
5000
5000
23
27
29
33
35
38
42
47
ROD CHAIR
PRODUCT NO.
ROD CHAIR
RC2
RC3
DESCRIPTION
3 X 6/8 NO. 2 ROD CHAIR
3 X 10/16 NO. 3 ROD CHAIR
BAR TIES AND TOOLS & TIE WIRE
DESCRIPTION
PRODUCT NO.
BAR TIE
BT4
BT45
BT5
BT55
BT6
BT65
BT7
BT8
4"
4.5"
5"
5.5"
6"
6.5"
7"
8"
BAR TIE TWISTER
BTT
BTTA
MANUAL TIE TOOL
AUTOMATIC TIE TOOL
1
1
.5
1
TIE WIRE
TWB312
TWG312
3.5 LBS
3.5 LBS
20
20
70
70
PACKAGING
WEIGHT
50
50
50
50
17
23
26
30
BAR TIE
BAR TIE
BAR TIE
BAR TIE
BAR TIE
BAR TIE
BAR TIE
BAR TIE
BLACK TIE WIRE
GALV TIE WIRE
ANCHOR BOLTS
PRODUCT NO.
ANCHOR BOLT
ABBL12006
ABBL12008
ABBL12010
ABBL12012
DESCRIPTION
1/2" X 6" BLACK ANCHOR BOLT
1/2" X 8" BLACK ANCHOR BOLT
1/2" X 10" BLACK ANCHOR BOLT
1/2" X 12" BLACK ANCHOR BOLT
QUALITY AND SERVICE Since 1923
29
Return to Index Page
FOUNDATION ANCHOR AND TRUSS ANCHOR
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
FOUNDATION ANCHOR (ICBO NO: 3701)
FA1
14.75" FOUNDATION ANCHOR
FA2
22.75" FOUNDATION ANCHOR
50
50
17
25
TRUSS ANCHOR
TA08OC
TA10OC
TA12OC
TA14OC
TA16OC
TA18OC
TA20OC
100
100
100
100
100
100
100
28
33
38
44
50
55
60
PACKAGING
WEIGHT
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
5
6
7
8
9
10
11
21
23
24
26
28
30
32
37
PACKAGING
WEIGHT
EACH
EACH
EACH
11
12
14
8" OC TRUSS ANCHOR FASTENERS 5-16D LOAD 897
10" OC TRUSS ANCHOR FASTENERS 7-16D LOAD 1256
12" OC TRUSS ANCHOR FASTENERS 9-16D LOAD1615
14" OC TRUSS ANCHOR FASTENERS 10-16D LOAD 1680
16" OC TRUSS ANCHOR FASTENERS 10-16D LOAD1680
18" OC TRUSS ANCHOR FASTENERS 10-16D LOAD 1680
20" OC TRUSS ANCHOR FASTENERS 10-16D LOAD 1680
BRICK LINTEL
PRODUCT NO.
BRICK LINTELS
BRL24
BRL30
BRL36
BRL42
BRL48
BRL54
BRL60
BRL66
BRL72
BRL78
BRL84
BRL90
BRL96
BRL102
BRL120
DESCRIPTION
24" BRICK LINTEL
30" BRICK LINTEL
36" BRICK LINTEL
42" BRICK LINTEL
48" BRICK LINTEL
54" BRICK LINTEL
60" BRICK LINTEL
66" BRICK LINTEL
72" BRICK LINTEL
78" BRICK LINTEL
84" BRICK LINTEL
90" BRICK LINTEL
96" BRICK LINTEL
102" BRICK LINTEL
120" BRICK LINTEL
BLOCK LINTEL
PRODUCT NO.
BLOCK LINTELS
BLL842
BLL848
BLL854
DESCRIPTION
42" - 8" BLOCK LINTEL
48" - 8" BLOCK LINTEL
52" - 8" BLOCK LINTEL
30
Return to Index Page
STEEL MILL ANGLE
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
STEEL MILL ANGLE 3/16"
MA3160024
3" X 3"
MA316030
3" X 3"
MA316036
3" X 3"
MA3160420
3" X 3"
MA3160048
3" X 3"
MA3160054
3" X 3"
MA3160060
3" X 3"
MA3160066
3" X 3"
MA3160072
3" X 3"
MA3160078
3" X 3"
MA3160084
3" X 3"
MA3160090
3" X 3"
MA3160096
3" X 3"
MA31600102
3" X 3"
MA31600108
3" X 3"
MA31600114
3" X 3"
MA31600120
3" X 3"
MA31600240
3" X 3"
24" MILL ANGLE
30" MILL ANGLE
36" MILL ANGLE
42" MILL ANGLE
48" MILL ANGLE
54" MILL ANGLE
60" MILL ANGLE
66" MILL ANGLE
72" MILL ANGLE
78" MILL ANGLE
84" MILL ANGLE
90" MILL ANGLE
96" MILL ANGLE
102" MILL ANGLE
108" MILL ANGLE
114" MILL ANGLE
120" MILL ANGLE
240" MILL ANGLE
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
8
9
11
13
15
17
19
21
22
24
26
28
30
32
33
35
37
74
STEEL MILL ANGLE 1/4"
MA1400024
3.5" X 3.25"
MA1400030
3.5" X 3.25"
MA1400036
3.5" X 3.25"
MA1400042
3.5" X 3.25"
MA1400048
3.5" X 3.25"
MA1400054
3.5" X 3.25"
MA1400060
3.5" X 3.25"
MA1400066
3.5" X 3.25"
MA1400072
3.5" X 3.25"
MA1400078
3.5" X 3.25"
MA1400084
3.5" X 3.25"
MA1400090
3.5" X 3.25"
MA1400096
3.5" X 3.25"
MA14000102
3.5" X 3.25"
MA14000108
3.5" X 3.25"
MA14000114
3.5" X 3.25"
MA14000120
3.5" X 3.25"
MA14000240
3.5" X 3.25"
24" MILL ANGLE
30" MILL ANGLE
36" MILL ANGLE
42" MILL ANGLE
48" MILL ANGLE
54" MILL ANGLE
60" MILL ANGLE
66" MILL ANGLE
72" MILL ANGLE
78" MILL ANGLE
84" MILL ANGLE
90" MILL ANGLE
96" MILL ANGLE
102" MILL ANGLE
108" MILL ANGLE
114" MILL ANGLE
120" MILL ANGLE
240" MILL ANGLE
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
11
14
16
19
22
24
27
30
33
35
38
41
43
46
49
51
54
108
PACKAGING
WEIGHT
CRAWL SPACE DOOR
FAD1632
32" X 16" FOUNDATION DOOR
FAD3220
32" X 20" FOUNDATION DOOR
FAD3224
32" X 24" FOUNDATION DOOR
2
2
2
38
42
46
CLEAN OUT DOOR
COD0808
COD0810
COD0812
6
6
6
43
60
62
FOUNDATION AND CLEAN OUT DOORS
PRODUCT NO.
DESCRIPTION
8" X 8" CLEAN OUT DOOR
8" X 10" CLEAN OUT DOOR
8" X 12" CLEAN OUT DOOR
31
Return to Index Page
CAST IRON DAMPER AND ASH DUMPS
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
EACH
EACH
EACH
44
50
68
12
40
PACKAGING
WEIGHT
50
50
50
50
50
50
26
26
26
26
26
26
PACKAGING
WEIGHT
CAST IRON DAMPER
DAMP36
36" CAST IRON DAMPER
DAMP42
42" CAST IRON DAMPER
DAMP48
48" CAST IRON DAMPER
ASH DUMPS
AD4080
4.5" X 9" ASH DUMP
SOFFIT VENT
PRODUCT NO.
DESCRIPTION
SOFFIT VENT (NET FREE AREA 61 SQ. INCHES)
VENT8MF
8' CONTINUOUS SOFFIT VENT MILL ALUM
VENT8BR
8' CONTINUOUS SOFFIT VENT BR ALUM
VENT8WH
8' CONTINUOUS SOFFIT VENT WH ALUM
VENT8MFS
8' STRAIGHT LEG SOFFIT VENT MILL ALUM
VENTBRS
8' STRAIGHT LEG SOFFIT VENT BR ALUM
VENT8WHS
8' STRAIGHT LEG SOFFIT VENT WH ALUM
UNDER EAVE VENT
PRODUCT NO.
DESCRIPTION
UNDER EAVE VENT (NET FREE AREA 16X4 = 22 SQ. INCHES / 16X8 = 58 SQ. INCHES)
VENT164MF
16" X 4" UNDER EAVE VENT MILL ALUM
VENT164BR
16" X 4" UNDER EAVE VENT BR ALUM
VENT164WH
16" X 4" UNDER EAVE VENT WH ALUM
VENT168MF
16" X 8" UNDER EAVE VENT MILL ALUM
VENT168BR
16" X 8" UNDER EAVE VENT BR ALUM
VENT168WH
16" X 8" UNDER EAVE VENT WH ALUM
24
24
24
24
24
24
3
3
3
5
5
5
PACKAGING
WEIGHT
36
36
24
24
1
1
2
2
PACKAGING
WEIGHT
MIDGET LOUVER
PRODUCT NO.
MIDGET LOUVER
VENTMIN10
VENTMIN20
VENTMIN30
VENTMIN40
DESCRIPTION
1" MINI VENT MILL ALUM
2" MINI VENT MILL ALUM
3" MINI VENT MILL ALUM
4" MINI VENT MILL ALUM
FOUNDATION VENT
PRODUCT NO.
DESCRIPTION
FOUNDATION VENT (NET FREE AREA SLIDE = 40 SQ. INCHES / DAMPER = 72 SQ. INCHES)
VENTTFPSBK
PLASTIC SLIDE FOUNDATION VENT BK
12
VENTTFPDBK
PLASTIC DAMPER FOUNDATION VENT BK
12
VENTFPPDBR
PLASTIC DAMPER FOUNDATION VENT BR
12
VENTFPSBR
PLASTIC SLIDE FOUNDATION VENT BR
12
VENTFPSGR
PLASTIC SLIDE FOUNDATION VENT GR
12
17
16
16
17
17
32
Return to Index Page
WIND TURBINE
PRODUCT NO.
DESCRIPTION
WIND TURBINE (NET FREE AREA 95 SQ. INCHES)
VENTTEB12MF
12" EXTERNAL TURBINE MILL GALV
VENTTIB12MF
12" INTERNAL TURBINE MILL GALV
VENTTIB12BR
12" INTERNAL TURBINE MILL BR GALV
VENTTIB12BK
12" INTERNAL TURBINE MILL BK GALV
VENTTIB12AMF
12" INTERNAL TURBINE MILL ALUM
VENTTIB12ABR
12" INTERNAL TURBINE MILL BR ALUM
VENTTIBABK
12" INTERNAL TURBINE MILL BK ALUM
VENTTEB12BR
12" EXTERNAL BRACE TURBINE BR GALV
VENTTEB12BK
12" EXTERNAL BRACE TURBINE BK GALV
VENTTIB12ABZ
12" INTERNAL BRACE TUBINE WTHRD. GR ALUM
PACKAGING
WEIGHT
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
EACH
7
7
7
7
7
7
7
7
7
7
POWER ATTIC VENTILATOR & STATIC ROOF VENT
PRODUCT NO.
PACKAGING
WEIGHT
POWER ATTIC VENTILATOR
PDV305MGR
POWER DOME VENT GR 1060 CFM
PDV305MBR
POWER DOME VENT BR 1060 CFM
PDV305MBK
POWER DOME VENT BK 1060 CFM
EACH
EACH
EACH
14
14
14
STATIC ROOF VENT (NET FREE AREA 196 SQ. INCHES)
VENTRV144MF
STATIC ROOF VENT MILL ALUM
VENTRV144BR
STATIC ROOF VENT BR ALUM
VENTRV144BK
STATIC ROOF VENT BK ALUM
VENTRV144BZ
STATIC ROOF VENT WTHRD GR ALUM
EACH
EACH
EACH
EACH
5
5
5
5
10
10
10
20
20
20
PACKAGING
WEIGHT
12
12
31
44
PACKAGING
WEIGHT
12
12
12
12
12
12
56
56
56
56
56
56
DESCRIPTION
PLASTIC ROOF VENT (NET FREE AREA 65 SQ. INCHES)
VENTRVBKP
PLASTIC ROOF VENT BK
VENTRVBRP
PLASTIC ROOF VENT BR
VENTRVBZP
PLASTIC ROOF VENT WTHRD. GR
PLASTIC SHINGLE OVER VENT
PRODUCT NO.
DESCRIPTION
PLASTIC SHINGLE OVER VENT (NET FREE AREA 72 SQ. INCHES)
VENTPSOV
4 FT PLASTIC SHINGLE OVER VENT - RED
VENTPSOVHC
4 FT HURRICANE COUNTRY SHINGLE OVER VENT - BLUE
RIDGE VENT
PRODUCT NO.
DESCRIPTION
RIDGE VENT (NET FREE AREA 18 SQ. IN/FT)
VENTRV10MF
10' RIDGE VENT MILL ALUM
VENTRV10BR
10' RIDGE VENT BR ALUM
VENTRV10BK
10' RIDGE VENT BK ALUM
VENTRV10BZ
10' RIDGE VENT WTHRD. GR ALUM
VENTRV10WH
10' RIDGE VENT WH ALUM
VENTRV10GR
10' RIDGE VENT GR ALUM
33
Return to Index Page
RIDGE VENT CONNECTORS & PLUGS
PRODUCT NO.
DESCRIPTION
RIDGE VENT STRAPS AND END PLUG / CONNECTOR
VENTRAF11MF
RIDGE VENT STRAP MF ALUM
VENTRAF11BR
RIDGE VENT STRAP BR ALUM
VENTRAF11BK
RIDGE VENT STRAP BK ALUM
VENTRAF11BZ
RIDGE VENT STRAP WTHRD. GR ALUM
VENTRAF11WH
RIDGE VENT STRAP WH ALUM
VENTRAF11GR
RIDGE VENT STRAP GR ALUM
VENTRAF12
FOAM CONNECTOR & END PLUG
VENTTRAF12R
RUBBER END PLUG
PACKAGING
WEIGHT
24
24
24
24
24
24
24
36
2
2
2
2
2
2
1
5
PACKAGING
WEIGHT
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
12
12
12
10
10
10
10
10
18
18
18
18
18
21
21
21
21
PACKAGING
WEIGHT
1
1
1
1
1
1.5
2.5
3.5
PACKAGING
WEIGHT
1
1
.5
.5
OFF RIDGE VENTS
PRODUCT NO.
OFF RIDGE VENT
VENT2RMF
VENT2RBK
VENT2RBR
VENT4R
VENT4RBK
VENT4RBR
VENT4RGR
VENT4RWH
VENT6R
VENT6RBK
VENT6RBR
VENT6RGR
VENT6RWH
VENT8RGR
VENT8RBK
VENT8RBR
VENT8RWH
DESCRIPTION
2 FT ROOF VENT GALV MILL
2 FT ROOF VENT GALV BLACK
2 FT ROOF VENT GALV BROWN
4 FT ROOF VENT GALV MILL
4 FT ROOF VENT GALV BLACK
4 FT ROOF VENT GALV BROWN
4 FT ROOF VENT GALV GRAY
4 FT ROOF VENT GALV WHITE
6 FT ROOF VENT GALV MILL
6 FT ROOF VENT GALV BLACK
6 FT ROOF VENT GALV BROWN
6 FT ROOF VENT GALV GRAY
6 FT ROOF VENT GALV WHITE
8 FT ROOF VENT GALV MILL
8 FT ROOF VENT GALV BLACK
8 FT ROOF VENT GALV BROWN
8 FT ROOF VENT GALV WHITE
ROOF JACK VENT
PRODUCT NO.
ROOF JACK
VENTRJWP3
VENTRJWP4
VENTRJWP6
VENTRJWP8
DESCRIPTION
ROOF JACK 1 /12 PITCH 3" WITH WIND BAND
ROOF JACK 1 /12 PITCH 4" WITH WIND BAND
ROOF JACK 1 /12 PITCH 6" WITH WIND BAND
ROOF JACK 1 /12 PITCH 8" WITH WIND BAND
ALL PURPOSE VENT
PRODUCT NO.
DESCRIPTION
ALL PURPOSE VENT
VENTRJF
ALL PURPOSE VENT 10" FLAT
VENTRJP
ALL PURPOSE VENT 10" 4 /12 PITCH
OTHER SIZES AVAILBLE
34
Return to Index Page
GOOSENECK ROOF VENT
PRODUCT NO.
GOOSENECK VENT
VENTGN4BKS
VENTGN4BRS
VENTGN4GLS
VENTGN4GLT
VENTGN4WHS
VENTGN6GL
VENTGN6GLT
VENTGN10BK
VENTGN10BR
VENTGN10GL
VENTGN10GLT
VENTGN10WH
DESCRIPTION
PACKAGING
WEIGHT
24
24
24
10
24
16
6
6
6
6
4
6
38
38
38
26
34
23
23
22
22
22
19
22
PACKAGING
WEIGHT
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
5
5
8
10
14
17
23
27
12
17
21
25
28
32
36
40
47
29
35
41
47
52
24
35
42
58
68
33
25
4" GALV SHORT GOOSENECK ROOF VENT
4" GALV SHORT GOOSENECK ROOF VENT BROWN
4" GALVALUME GOOSENECK ROOF VENT
4" GALVALUME TILE GOOSENECK ROOF VENT
4" GALV SHORT GOOSENECK ROOF VENT WHITE
6" GALV GOOSENECK ROOF VENT MILL
6" GALVALUME TILE GOOSENECK ROOF VENT
10" GALV GOOSENECK ROOF VENT BLACK
10" GALV GOOSENECK ROOF VENT BROWN
10" GALVALUME GOOSENECK ROOF VENT
10" GALVALUME TILE GOOSENECK ROOF VENT
10" GALV GOOSENECK ROOF VENT WHITE
FURNACE PIPE
PRODUCT NO.
FURNACE PIPE
FP7400
FP7401
FP7402
FP7403
FP7404
FP7405
FP7600
FP7601
FP7602
FP7603
FP7604
FP7605
FP7606
FP7607
FP7608
FP7302
FP7303
FP7304
FP7305
FP7306
FP7421
FP7422
FP7423
FP7424
FP7425
FP402-5
FP403-5
DESCRIPTION
GALV FURNACE PIPE 3" X 24" 30 GA SNAP LOCK
GALV FURNACE PIPE 4" X 24" 30 GA SNAP LOCK
GALV FURNACE PIPE 5" X 24" 30 GA SNAP LOCK
GALV FURNACE PIPE 6" X 24" 30 GA SNAP LOCK
GALV FURNACE PIPE 7" X 24" 30 GA SNAP LOCK
GALV FURNACE PIPE 8" X 24" 30 GA SNAP LOCK
GALV FURNACE PIPE 3" X 24" 28 GA SNAP LOCK
GALV FURNACE PIPE 4" X 24" 28 GA SNAP LOCK
GALV FURNACE PIPE 5" X 24" 28 GA SNAP LOCK
GALV FURNACE PIPE 6" X 24" 28 GA SNAP LOCK
GALV FURNACE PIPE 7" X 24" 28 GA SNAP LOCK
GALV FURNACE PIPE 8" X 24" 28 GA SNAP LOCK
GALV FURNACE PIPE 9" X 24" 28 GA SNAP LOCK
GALV FURNACE PIPE 10" X 24" 28 GA SNAP LOCK
GALV FURNACE PIPE 12" X 24" 28 GA SNAP LOCK
GALV FURNACE PIPE 5" X 24" 24 GA
GALV FURNACE PIPE 6" X 24" 24 GA
GALV FURNACE PIPE 7" X 24" 24 GA
GALV FURNACE PIPE 8" X 24" 24 GA
GALV FURNACE PIPE 9" X 24" 24 GA
GALV FURNACE PIPE 4" X 60" 30 GA
GALV FURNACE PIPE 5" X 60" 30 GA
GALV FURNACE PIPE 6" X 60" 30 GA
GALV FURNACE PIPE 7" X 60" 30 GA
GALV FURNACE PIPE 8" X 60" 30 GA
4" 30 GA 10' MADE UP GALV FURNACE PIPE
3" 30 GA 10' MADE UP GALV FURNACE PIPE
HIGHEST QUALITY PRODUCTS
We place primary importance on assuring our customers top
quality products made from the finest materials available. In fact, we guarantee it...
35
Return to Index Page
CHIMNEY HOODS
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
12
12
12
12
12
12
12
5
6
9
12
14
17
19
PACKAGING
WEIGHT
30 GAUGE GALVANIZED ELBOW
EA8460
3" GALV ELBOW 30 GA
EA8461
4" GALV ELBOW 30 GA
EA8462
5" GALV ELBOW 30 GA
EA8463
6" GALV ELBOW 30 GA
EA8464
7" GALV ELBOW 30 GA
EA8465
8" GALV ELBOW 30 GA
EA8466
9" GALV ELBOW 30 GA
12
12
12
12
12
12
12
3
4
7
5
13
16
20
28 GAUGE GALVANIZED ELBOW
EA8660
3" GALV ELBOW 28 GA
EA8661
4" GALV ELBOW 28 GA
EA8662
5" GALV ELBOW 28 GA
EA8663
6" GALV ELBOW 28 GA
EA8664
7" GALV ELBOW 28 GA
EA8665
8" GALV ELBOW 28 GA
EA8666
9" GALV ELBOW 28 GA
EA8667
10" GALV ELBOW 28 GA
EA8668
12" GALV ELBOW 28 GA
12
12
12
12
12
12
12
12
12
5
7
10
12
16
20
23
36
37
24 GAUGE GALVANIZED ELBOW
EA8362
5" GALV ELBOW 24 GA
EA8363
6" GALV ELBOW 24 GA
EA8364
7" GALV ELBOW 24 GA
EA8365
8" GALV ELBOW 24 GA
EA8366
9" GALV ELBOW 24 GA
EA8367
10" GALV ELBOW 24 GA
12
12
12
12
12
12
16
20
25
32
37
43
PACKAGING
WEIGHT
10
10
10
12
12
12
4
6
6
8
9
8
GALVANIZED CHIMNEY HOODS
CH8100
3" GALV CHIMNEY HOOD
CH8101
4" GALV CHIMNEY HOOD
CH8102
5" GALV CHIMNEY HOOD
CH8103
6" GALV CHIMNEY HOOD
CH8104
7" GALV CHIMNEY HOOD
CH8105
8" GALV CHIMNEY HOOD
CH8106
9" GALV CHIMNEY HOOD
FURNACE ELBOWS
PRODUCT NO.
DESCRIPTION
REDUCERS AND INCREASERS
PRODUCT NO.
DESCRIPTION
GALVANIZED REDUCERS AND INCREASERS
RI4280
4" TO 3" GALV REDUCER
RI4281
5" TO 4" GALV REDUCER
RI4282
5" TO 3" GALV REDUCER
RI4283
6" TO 5" GALV REDUCER
RI4284
6" TO 4" GALV REDUCER
RI4300
6" TO 3" GALV REDUCER
36
Return to Index Page
REDUCERS AND INCREASERS
PRODUCT NO.
PACKAGING
WEIGHT
12
12
10
12
10
10
12
12
12
12
9
11
9
12
4
6
8
9
11
12
PACKAGING
WEIGHT
GALVANIZED TEE JOINTS
TJ7730
GALV TEE JOINT 3" X 15" MADE UP
TJ7731
GALV TEE JOINT 4" X 15" MADE UP
TJ7732
GALV TEE JOINT 5" X 15" MADE UP
TJ7733
GALV TEE JOINT 6" X 15" MADE UP
TJ7734
GALV TEE JOINT 7" X 15" MADE UP
TJ7735
GALV TEE JOINT 8" X 15" MADE UP
TJ7736
GALV TEE JOINT 9" X 15" MADE UP
TJ7737
GALV TEE JOINT 10" X 15" MADE UP
12
12
10
10
9
7
5
2
12
13
17
20
22
22
18
8
GALVANIZED TEE COVERS
TC7770
GALV TEE COVER 3"
TC7771
GALV TEE COVER 4"
TC7772
GALV TEE COVER 5"
TC7773
GALV TEE COVER 6"
TC7774
GALV TEE COVER 7"
TC7775
GALV TEE COVER 8"
TC7776
GALV TEE COVER 9"
12
12
12
12
12
12
12
2
3
4
5
6
7
9
PACKAGING
WEIGHT
10
10
10
10
26
31
36
40
PACKAGING
WEIGHT
12
12
12
12
12
15
21
24
DESCRIPTION
GALVANIZED REDUCERS AND INCREASERS
RI4285
7" TO 6" GALV REDUCER
RI4287
8" TO 7" GALV REDUCER
RI4288
8" TO 6" GALV REDUCER
RI4290
9" TO 8" GALV REDUCER
RI4360
3" TO 4" GALV INCREASER
RI4362
4" TO 5" GALV INCREASER
RI4363
5" TO 6" GALV INCREASER
RI4365
6" TO 7" GALV INCREASER
RI4366
7" TO 8" GALV INCREASER
RI4367
8" TO 9" GALV INCREASER
GALVANIZED FURNACE ACCESSORIES
PRODUCT NO.
DESCRIPTION
BLACK STOVE PIPE
PRODUCT NO.
BLACK STOVE PIPE
BP7349
BP7350
BP7351
BP7352
DESCRIPTION
5" X 24" BK PIPE 24 GA
6" X 24" BK PIPE 24 GA
7" X 24" BK PIPE 24 GA
8" X 24" BK PIPE 24 GA
BLACK STOVE PIPE AND ACCESSORIES
PRODUCT NO.
BLACK ELBOW
BE8399
BE8400
BE8401
BE8402
DESCRIPTION
5" BK ELBOW 24 GA
6" BK ELBOW 24 GA
7" BK ELBOW 24 GA
8" BK ELBOW 24 GA
37
Return to Index Page
BLACK STOVE PIPE AND ACCESSORIES
PRODUCT NO.
DESCRIPTION
PACKAGING
WEIGHT
BLACK REDUCER
BR4509
BR4510
BR4515
BK REDUCER 6" TO 5"
BK REDUCER 7" TO 6"
BK REDUCER 8" TO 6"
12
12
10
12
17
24
BLACK INCREASER
BI4529
BI4530
BI4535
BK INCREASER 5" TO 6"
BK INCREASER 6" TO 7"
BK INCREASER 6" TO 8"
12
12
10
12
17
24
BLACK TEE JOINTS
BT7370
BT7371
BT7372
BT7373
BK TEE JOINT 5" X 15"
BK TEE JOINT 6" X 15"
BK TEE JOINT 7" X 15"
BK TEE JOINT 8" X 15"
1
1
1
1
2
3
3
4
BLACK TEE COVERS
BC7701
BC7702
BC7703
BC7704
BK TEE COVER 5"
BK TEE COVER 6"
BK TEE COVER 7"
BK TEE COVER 8"
12
12
12
12
5
6
8
9
PACKAGING
WEIGHT
ALUMINUM DRYER VENT PARTS
DVP1220
VENT HOOD - 3"
DVP1221
VENT HOOD - 4"
DVP1222
VENT HOOD - 4" WIDE MOUTH
DVP1223
VENT HOOD - 3" WIDE MOUTH
DVP1274
3" X 24" ALUM VENT PIPE (S/L)
DVP1275
4" X 24" ALUM VENT PIPE (S/L)
DVP1213
4" ALUM ELBOW (4 PCS)
DVP1262
3' ALUM ELBOW (4 PCS)
DVP1251
4" TO 3" ALUM REDUCER
DVP1252
3" TO 4" ALUM INCREASER
12
12
10
10
25
25
12
12
12
12
5
6
6
5
8
11
2
2
3
3
BATHROOM VENT KITS
BV2472
ALUM 4" VENT CAP
BV2471
BATHROOM VENT KIT 3" OR 4"
1
1
1
1
DRYER VENT PARTS AND BATHROOM VENTS
PRODUCT NO.
DESCRIPTION
QUALITY AND SERVICE for over 86 years Since 1923
38
Return to Index Page
VENT4R
VENT4RBK
VENT4RBR
VENT4RGR
VENT4RWH
VENT6R
VENT6RBK
VENT6RBR
VENT6RGR
VENTRV10MF
VENTRV10BR
VENTRV10BK
VENTRV10BZ
VENTRV10WH
VENTRV10GR
VENTPSOVHC
4 FT ROOF VENT GALV MILL
4 FT ROOF VENT GALV BLACK
4 FT ROOF VENT GALV BROWN
4 FT ROOF VENT GALV GRAY
4 FT ROOF VENT GALV WHITE
6 FT ROOF VENT GALV MILL
6 FT ROOF VENT GALV BLACK
6 FT ROOF VENT GALV BROWN
6 FT ROOF VENT GALV GRAY
10' RIDGE VENT MILL ALUM
10' RIDGE VENT BR ALUM
10' RIDGE VENT BK ALUM
10' RIDGE VENT WTHRD. GR ALUM
10' RIDGE VENT WH ALUM
10' RIDGE VENT GR ALUM
4 FT HURRICANE COUNTRY SHINGLE OVER VENT - BLUE
1
1
1
1
1
1
1
1
1
12
12
12
12
12
12
12
10
10
10
10
10
18
18
18
18
56
56
56
56
56
56
44
FOR YOUR OWN PROTECTION
IF THESE GOODS ARE DAMAGED in transit, the transportation company’s agent (usually the truck driver
making the delivery) must write on the freight bill he gives you, full exception covering any bad order packages.
If there is any shortage, the same must be noted on the freight bill by the agent at the time of delivery.
He is required to do these things if requested. It is your responsibility to see that these notations are made.
FOR BOTH VISIBLE AND CONCEALED DAMAGE it is your responsibility to contact the delivering transportation company, or their agent. You must request to them in writing to make an inspection and to furnish you with
their inspection report covering complete damage sustained. This request should be made as soon
as the full nature of any damage is ascertained. The inspection must be made and completed within
15 days of receipt of goods. All freight bills rendered by the truck driver should be signed “Subject to
inspection for concealed damage.”
YOU MUST FILE CLAIM immediately following receipt of carrier’s inspection report. This claim should consist
of a letter to the delivering transportation company, listing the damage and the amount of the claim. It must
be accompanied with the proper supporting papers (normally consisting of Bill of Lading, Freight Bill,
duplicate of our invoice and Inspection Report.)
UNITED PARCEL SHIPMENTS must be kept in original carton and wrappings. Contact your local UPS office to
have inspection made and claim filed.
Any claims which you may have must be handled as outlined above. We cannot accept the return of any
merchandise unless such return is authorized by us.
FLAMCO CONTACT INFORMATION
HOME OFFICE
FLAMCO
6940 STUART AVE.
JACKSONVILLE, FL 32257
800.634.3967
904.783.8400
904.783.8403 FAX
TX OFFICE
FLAMCO OF TX
2525 GHOLSON RD.
WACO, TX 76704
800.866.1224
254.799.4936
800.799.2657 FAX
WEB
WWW.FLAMCO.COM
On the FLAMCO web page there is a PDF file of the catalog for download.
39
FLORIDA METAL PRODUCTS, INC.
PO BOX 6310 JACKSONVILLE, FL 32236 / 6940 STUART AVE. JACKSONVILLE, FL 32254
904.783.8400 / 800.634.3937 / FAX 904.783.8403
APPLICATION FOR CREDIT
TYPE OF OWNERSHIP
[ ] CORPORATION
[ ] PARTNERSHIP
[ ] INDIVIDUAL
TYPE OF BUSINESS:
COMPANY NAME / BILL TO:
MAILING ADDRESS:
CITY:
PHONE NO:
STATE:
FAX NO:
ZIP CODE:
E-MAIL:
COMPANY NAME & SHIP TO ADDRESS:
CITY:
STATE:
ZIP CODE:
PRINCIPAL OWNER'S / OFFICERS
PRINCIPAL OWNER'S / OFFICERS
BANK INFORMATION
BANK NAME:
MAILING ADDRESS:
CITY:
PHONE NO:
STATE:
ZIP CODE:
FAX NO:
E-MAIL:
ACCOUNT NUMBERS:
ACCOUNT NUMBERS:
CURRENT CREDIT REFERENCES
NAME
ADDRESS
PHONE
FAX
NAME
ADDRESS
PHONE
FAX
NAME
ADDRESS
PHONE
FAX
CITY
ST & ZIP
E-MAIL
CITY
ST & ZIP
E-MAIL
CITY
ST & ZIP
E-MAIL
Application for credit is hereby made. It is understood this information will be held in strict confidence and used only by the
Credit Department of Florida Metal Products. We understand and agree to abide to all terms and conditions listed on page 41.
I hereby authorize Florida Metal Products to obtain any and all information required from the above references.
SIGNATURE & TITLE:
DATE:
FOR CREDIT DEP. USE ONLY
[ ] ACCEPTED [ ] REFUSED / SIGNATURE:
DATE:
40
TERMS & CONDITIONS OF SALE
RETURNED MERCHANDISE: Merchandise to be returned must have written approval by an officer
of FLAMCO prior to being returned to the factory Freight Prepaid and will be subject to a 25%
re-stocking charge. Special order merchandise is not returnable.
SPECIAL HANDLING: Bus, airline, etc. shipments are freight collect with a $15.00 handling
charge. There will be no broken cartons
PRICES: Prices are subject to change without notice. All orders will be invoiced at the price in
effect at the time of shipment. All previous price sheets void.
FREIGHT TERMS: Orders will be shipped Freight collect unless they are in excess of $2,500.00.
No freight cost will be paid on customer pick ups.
DELIVERY AND SHIPMENT: Unless otherwise specified upon delivery of materials FOB FLAMCO’s
plant, all risk of loss, damage and other incidents of ownership shall immediately pass to the buyer, but
title to materials will be retained by FLAMCO as security for buyer‘s performance until payment in full
is received.
PAYMENT: Cash on delivery (C.O.D.) sales are net with FLAMCO holding the option
of requiring cash or certified check, if it becomes necessary in our judgement.
• Open account sales have payment terms of 1%, 10th and 25th; net 30 unless otherwise
stipulated. An explanation of these terms follows:
• Terms of 1%, 10th and 25th; net 30 mean invoices dated between the 1st and 15th of the month
are due the 25th, invoices dated between the 16th and the end of the month are due the 10th of the
following month in order to rate the 1% cash discount. If the discount terms are not taken the net
amount is due 30 days from the date of the invoice
• All invoices will be dated the day of shipment.
• A Finance charge of 1-1/2% per month (18% annum) after 30 days from the date of invoice.
• If the invoice is not paid when due, or it becomes necessary to enforce these terms and conditions,
purchaser agrees to pay all costs of the collection and enforcement including attorney‘s fees, whether
incurred in or out of court on appeal in arbitration, in bankruptcy court, or in any insolvency proceedings
DELAY: FLAMCO shall be excused for any delay in performance due to acts of God, war, riot,
embargoes, acts of civil or military authorities, fires, floods, accidents and quarantine restriction, mill
conditions, strikes, differences with workmen, delays in transportation, shortage of cars, fuel, labor or
materials, or any circumstance or cause beyond the control of FLAMCO in the reasonable
conduct of its business.
TAXES: These prices do not include sales, excise, transportation or other similar taxes present or future.
CLAIMS: Claims must be made upon receipt of goods. Our responsibility ceases as soon as goods are
loaded FOB our warehouse or, if delivered by us, at destination point. All hidden damage
claims must be made within 5 days from receipt of shipment with the delivering carrier.
All Rights Reserved 2009 / 2010 © Florida Metal Products Inc.
41
FLORIDA METAL PRODUCTS INC.
PO BOX 6310 • JACKSONVILLE, FL 32236
SALES: 800.634.3937 • HOME OFFICE: 904.783.8400 • FAX: 904.783.8403
WEB: WWW.FLAMCO.COM