PDF - Delta Machinery

Transcription

2015 Catalog
The Measure of Precision™
FOR MORE INFORMATION VISIT www.deltamachinery.com
ONE TEAM’S
DEDICATION
For over 95 years, the same
team dedication that created the
innovation and quality of the first
Delta products has been passed
down and is followed by our team
of dedicated employees. With the
same strong passion to quality and
performance, the Delta team of today
has continued to develop products
that the professional and serious
woodworker has requested and
require to complete their projects.
With this, we would like to introduce
the next step in the Delta line of table
saws. This new 2015 catalog presents
the NEW 6000 Series Portable Table
Saws along with the complete line of
other quality products from Delta.
SAWS
1-13
PLANER
14
JOINTER
15
SANDERS
16-20
LATHE
21
GRINDING
22
DRILLING
23-24
DUST
COLLECTION
25-26
27
Portable Table Saw
NEW
36-6020 10-Inch Portable
Table Saw with Stand
• Delta standard blade guard and riving knife system
• Convenient blade height and bevel angle adjustment
with easy lock
• Telescoping rail and easy lock fence system
• On board storage for all accessories and guard, when
not in use
• UL Listed
Table Saw 3-Way Tool-free Guard System- riving
knife separates wood after cut and with pawls
helps prevent kick-back, while split blade guard
provides clear line of sight to cutting area.
Cord Wrap
Rear Support
“One-Step”
Cord wrap located on back
of saw - no more dangling
cords to get into the way
Rear support extension
“One-Step” folding stand for
easy set up and portability
Stock No.
36-6020
1
Description
10-Inch Portable Table Saw with Stand
For pricing please visit local dealer listings (pg. 30)
Portable Table Saw
NEW
36-6010 10-Inch Portable
Table Saw
• Delta standard blade guard and riving knife system
• Convenient blade height and bevel angle adjustment
with easy lock
• Telescoping rail and easy lock fence system
• On board storage for all accessories and guard, when
not in use
• UL Listed
Cord Wrap
Rear Support
Single Front Crank
Cord wrap located on back
of saw - no more dangling
cords to get into the way
Rear support extension
Easy blade height and bevel
adjustment with easy lock
Stock No.
36-6010
Description
10-Inch Portable Table Saw
2
Table Saw
36-L552 TYPE 2 Table Saw
• Single Cast-Iron Trunnion System results in
incredible vibration control providing continuous,
smooth operation and dependable accuracy
• The Bevel Dial allows fine tuning of the blade bevel
and provides accuracy you can trust to within 1/4°
• Tool-Free Split Guard design allows a true rise-and
fall riving knife by using a lever on the front of the saw
or inside the throat plate. Then, add the anti-kickback
pawls and guard to the riving knife without tools
• The Cabinet consists of a large cast iron base
• Table Top provides more surface area to stabilize the
work piece and offers outstanding smoothness
• Largest Blade Opening in the class
• Features a Push button arbor lock which makes blade
changes simple
• Large, Easy to Access ON/OFF switch
• Bi-Level Dust Extraction uses only 1 collector hose,
and the new closed bevel gauge provides a sealed
interior
• BIESEMEYER® Fence System with hairline pointer,
built-in tape, 9-ply fence faces, and improved cam lock
allows you to make precision set-ups
• UL Listed
Dual Front Cranks
Cast Iron Base
Storage
Dual Front Cranks make
adjusting blade height
and blade bevel easy and
accurate
The cabinet consists of a
large cast iron base
On-Board Miter Gauge,
Wrench, and Push Stick
Storage is conveniently
located on sides of the
cabinet
Stock No.
Description
36-L552 TYPE 2
5 HP Motor 10 in. UNISAW® with 52 in. BIESEMEYER® Fence System
36-L352 TYPE 2
36-L336 TYPE 2
3
Accessories
(Check website for availability)*
For Current Unisaw
34-154
Standard Table Insert
36-0101
Delta Table Saw
Arbor Wrench
36-808
Unisaw Dado Throat
Plate
34-184
Universal Tenoning
Jig
36-050
Table Saw Push Stick
50-257
Mobile Base For Saw
52 in. Fences
78-967
Thin Kerf Riving
Knife
34-929
Deluxe Miter
Gauge
36-201
Standard & Dado
Arbor Nut Assembly
50-2000
Mobile Base For Saw
30 in. Fences
34-976
Uniguard® Blade
Guard
36-805
Unisaw Zero
Clearance Throat
Plate
78-9450
Outfeed Table
78-970
Unisaw Accessory
Drawer
*For accessories not lisited please visit www.deltamachinery.com
4
10 in. Table Saw
5000 series 10 in. Table Saw
• Unique Tubular Stand for maximum support and
stability
• Ease of mobility with two fixed wheels and one
swivel wheel
• 36-5000 / 36-5052 have cast iron table top with
stamped steel extension wings
• 36-5100 / 36-5152 have cast iron table top with cast
iron extension wings
• 36-5000 / 36-5052 have extra stamp wing
• 36-5052 / 36-5152 have laminated table board
• Heavy duty one piece rail system for precision cuts
every time
• Heavy Duty Biesemeyer style fence with dual rip
windows
• Quick Assembly stand with less parts, allows fast
assembly
• Blade Brake stops the blade within seconds of the
power being turned off
• Large, Easy to Access ON/OFF switch
• UL Listed
(36-5100 Shown)
Storage
Swivel Wheel
Miter Gauge
Each of the 5000
series saws has on-tool
storage for its included
accessories
Ease of mobility with two
fixed wheels and one step
actuated swivel pedal
Precision miter gauge
with 9 detent stops at
most popular angles
Stock No.
Description
36-5000
36-5100
36-5052
36-5152
DELTA
DELTA
DELTA
DELTA
5
10
10
10
10
in.
in.
in.
in.
Left
Left
Left
Left
Tilt
Tilt
Tilt
Tilt
Contractor
Contractor
Contractor
Contractor
Saw
Saw
Saw
Saw
With
With
With
With
30
30
52
52
in.
in.
in.
in.
RH
RH
RH
RH
Rip
Rip
Rip
Rip
(Steel Wings)
(Cast Iron Wings)
(Steel Wings)
(Cast Iron Wings)
Accessories
36-501
Zero Clearance
Throat Plate
36-502
Dado Table Insert
34-929
Deluxe Miter
Gauge
34-184
Universal Tenoning
Jig
34-976
Uniguard® Blade
Guard
(Requires fabrication
of adapter plate)
6
Accessories
For Pre-2008 Unisaws & 10 in. Saws
7
34-154
Standard Insert Rt
Tilt Saw Only
34-264
Dado Insert
34-868
Disappearing Splitter
36-861
Standard Insert
36-862
Zero Clearance
Insert
36-0101
Delta Table Saw
Arbor Wrench
36-050
Table Saw Push Stick
36-201
Standard & Dado
Arbor Nut Assembly
50-273
Mobile Base Unisaw
50-284
Mobile Base Ext.
52 in. Unisaw
50-345
Universal Mobile Base
(with Stand; supports
up too 300 lbs.)
36-847
Dado Insert
Fence & Rail System
BC30T2 / BC50T2
BIESEMEYER® T-Square Fences Kit
• One piece 14 gauge 2” by 3” rectangular steel guide tube,
mounted onto 1/4” section angle iron rail
• Mounting design attaches to Delta® and most other table saws
with cast iron tables
• Laminated 9 ply Birch Plywood sides are durable and non-marring
• Fence body constructed of 14 gauge welded steel
• Three-point locking system with twin hairline pointers to assure
fence is parallel to blade and accurate to within 1/64 of an inch
(0.4mm)
• Easy-gliding, on solid nylon pads, with quick action handle with
magnets to hold handle up in release position, for easy positioning
• Fence securely clamps to both front tube only to insure perfect
parallelism to the blade front and back
• Quick-removal fence can be located on either side of the blade for
consistent ripping capabilities on left or right tilt saws
Stock No.
Description
BC30T2
64 in BIESEMEYER® T-Square Fence Kit
BC50T2
84 in BIESEMEYER® T-Square Fence Kit (comes with table and legs)
36-T30T3/ 36-T50T3
T-Square Fences
• One piece square tubular rail
• Mounting design attaches to Delta® table saws including
Contractor Saw®, Hybrid Saw®, and Unisaw® models
• Extruded aluminum faces attach to steel tubing for years of
continuous use
• Three-point locking system with twin hairline pointers to assure
fence is parallel to blade and accurate to within 1/64 of an inch
(0.4mm)
• Precision adjustments to square and level fence
• Easy-gliding, steel tube fence body to handle quick, precision
ripping, and square cuts
• Fence securely clamps to both front tube and hooks over rear rail
to allow for fence attachments
• Quick-removal fence can be located on either side of the blade for
consistent ripping capabilities on left or right tilt saws
• Tape located on both RH and LH side of blade
• 36-T50T3 comes with wood table board #36-T53
Stock No.
Description
36-T30T3
62 1/2 in T-Square Fence
36-T50T3
82 1/2 in T-Square Fence (comes with table and legs)
8
Stock Feeder
36-850 Stock Feeder
• Continuous-duty motor powers the lubricated
gear box
• Fully-adjustable support columns. Large hand
wheels move feeders horizontally or vertically
along columns
• The 36-850 includes 1/4 HP, 120 V, Reversing
Motor, 3 rubber feed rollers, vertical and horizontal
support columns, universal joints and lubricating
fittings, additional set of speed-changing gears
Stock No.
Description
36-850
1/4 HP 1 Phase 4 speed 3 Roller Production Stock Feeder
Accessories
36-857
Stand
9
Part #: 1340360
Drive Wheel
Miter Saw Stand
36-267 Miter Saw Stand
• Constructed of large OD steel tubing to support up
to 350 Lbs.
• One-Step set up and fold using the foot actuated
pedal
• Designed to hold virtually any miter saw on the
market even the larger 12” units
• Easy clamp-on miter saw mounts
• Large wheels and wide rubber, semi-pneumatic,
tires
• Designed for the storage of the folded stand, with
miter saw mounted
Stock No. Description
36-267
Mobile Miter Saw Stand
10
Band Saw
28-400 Band Saw
• Heavy duty steel frame design
• Aluminum trunnion table support
• Durable aluminum, rubber-coated upper and lower 9 spoke wheels
are precision balanced
• Standard 3/4” x 3/8” T-slot
• Larger insert for visibility when changing lower guide settings
• Includes 4 in. dust port, steel stand and a wood-cutting blade
• UL Listed
Blade
Two Speed Drive
Oversized Table
Precision ball bearing
upper and lower blade
guides ensure consistent
tracking for accurate
cutting performance
9 spoke aluminum wheels
for durability, with
replaceable tires
Table tilts 0°-45° for
bevel cutting
Stock No.
Description
28-400
14 in. 1 HP Steel Frame Band Saw
11
Accessories
Model #
28-033
28-034
28-036
28-038
28-040
28-045
28-046
28-047
28-050
28-052
28-073
28-074
28-075
28-168
28-564
28-565
28-567
28-568
Model #
28-062
28-064
28-176
28-177
28-225
28-227
28-228
28-229
28-580
Model #
28-165
28-167
Size
93 1/2 in. x 3/16 in. x 6
93 1/2 in. x 1/4 in. x 6
93 1/2 in. x 3/8 in. x 6
93 1/2 in. x 1/2 in. x 6
93 1/2 in. x 3/4 in. x 4
105 in. x 1/8 in. x 14
105 in. x 3/16 in. x 6
105 in. x 1/4 in. x 6
105 in. x 1/2 in. x 6
105 in. x 3/4 in. x 4
80 in. x 1/8 in. x 14
80 in. x 1/4 in. 6
80 in. x 3/8 in. x 6
56 1/8 in. x 3/8 in. x 6
82 in. x 1/4 in. x 14
82 in. x 1/8 in. x 14
82 in. x 1/4 in. x 6
82 in. x 3/8 in. x 6
TPI
TPI
TPI
TPI
TPI
TPI
TPI
TPI
TPI
TPI
TPI
TPI
TPI
TPI
TPI
TPI
TPI
TPI
Size
93 1/2 in. x 1/2 in. x 18 TPI Metal Cutting
93 1/2 in. x 1/2 in. x 24 TPI Metal Cutting
59 1/2 in. x 1/4 in. x 6 TPI
59 1/2 in. x 1/4 in. x 6 TPI
72 1/2 in. x 1/8 in. x 14 TPI
72 1/2 in. x 1/4 in. x 6 TPI
72 1/2 in. x 3/8 in. x 6 TPI
72 1/2 in. x 1/2 in. x 6 TPI
82 in. x 1/2 in. x 3 TPI
Size
56 1/8 in. x 1/4 in. x 6 TPI
56 1/8 in. x 1/8 in. x 14 TPI
Model #
28-061
28-063
28-066
28-073
28-074
28-075
28-076
28-079
28-080
28-081
28-083
28-084
28-086
28-087
28-088
28-089
28-090
28-091
28-096
28-097
28-098
28-099
28-102
28-103
28-108
28-109
28-124
28-126
28-128
28-129
28-178
28-222
28-223
28-224
28-226
28-232
28-253
Size
56 1/8 in. x 3/16 in. x 10 TPI RK Series
56 1/8 in. x 1/4 in. x 6 TPI PC Series
105 in. x 3/8 in. x 4 TPI PC Series
80 in. x 1/8 in. x 14 TPI
80 in. x 1/4 in. 6 TPI
80 in. x 3/8 in. x 6 TPI
93 1/2 in. x 1/8 in. x 14 TPI HP Series
93 1/2 in. x 3/4 in. x 3 TPI AS-S Series
105 in. x 1/8 in. x 14 TPI HP Series
105 in. x 3/16 in. x 10 TPI RK Series
105 in. 1/4 in. x 6 TPI PC Series
105 in. x 3/4 in. x 3 TPI AS-S Series
111 in. x 3/16 in. x 10 TPI RK Series
111 in. x 3/4 in. x 2/3 TPI VPC Series
59 1/2 in. x 3/8 in. x 6 TPI
142 in. x 3/4 in. x 2/3 TPI VPC Series
142 in. x 1 in. x 2 TPI PC Series
25-870
Magnetic Work Light
50-345
Universal Mobile Base (with
Stand; supports
up too 300 lbs.)
12
Scroll Saw
40-694 Scroll Saw
• Electronic variable speed can be adjusted from 400-1,750
SPM
• Unique dual parallel-link arm design reduces vibration and
noise, also keeps the blade perpendicular to the work surface
which dramatically reduces over or under cutting
• Upper arm lifts and locks in the raised position during blade
changes
• On/Off switch, electronic variable speed dial, flexible dust
blower and blade-tensioning lever conveniently located up
front for easy accessibility
• Tool-free blade clamp
• Single lever, tool-free blade tensioning
• Large, cast-iron table provides excellent material support
and bevels 0° - 45° left and right
• On-tool blade storage area, includes 2 straight blades
• CSA Listed
Stock No.Description
40-69420 in. Variable Speed Scroll Saw
Accessories
Model # 40-517
40-518
40-519
40-520
40-521
40-610
40-621 40-622
13
Size Qty
#2 Precision Ground Tooth Scroll Saw Blades #5 Precision Ground Tooth Scroll Saw Blades
#7 Precision Ground Tooth Scroll Saw Blades
#9R Precision Ground Tooth Scroll Saw Blades
2
2
2
2
2
2
2
2
40-696
Scroll Saw Stand
25-870
Magnetic Work Light
Planers
22-555 Planer
• Powerful 15A motor
• Four column design provides excellent stability
• Quick change knife system with dual edge disposable
knives lets you change knives without difficult-to-use
alignment jigs
• Adjustable infeed and outfeed tables
• Reversible dust port allows you to collect chips from the
right or left side of the planer
• Two polyurethane feed rollers positioned close to the
cutterhead to improve workpiece finish
• Precision machined steel cutterhead
• Stainless steel bed
• Overload protects motor from damage due to overheating
• CSA Listed
Stock No.
Description
22-555
13 in. Portable Thickness Planer
Accessories
Model #
22-547
22-549
22-562
22-591
Size Qty
12 in. High Speed Steel Planer Knives
13 in. Planer Knives
12 1/2 in. Planer Knives
13 in. Planer Knives
2
2
2
3
50-345
Universal Mobile Base
(with Stand; supports
up too 300 lbs.)
22-592
Universal
Planer Stand
14
Jointer
37-071 Jointer
• Durable cast iron construction
• Precision machined table and fence ensures
accuracy
• Heavy duty, cast iron fence support
• Simple fence adjustment
• Up to 1/8 in. depth of cut
• Aluminum cutterhead with two knives
• Built-in dust blower ejects chips efficiently and
virtually eliminates clogged dust chute
• Includes a pair of push blocks for easily and safely
moving material through the jointer
• CSA Listed
37-071
6 in. MIDI-Bench Jointer
Accessories
Model #
37-072
37-155
37-355
37-363
15
Size Qty
6” Cutterhead Knives
2
3
3
3
37-073
Dust Bag With Clamp
Sanders
31-140 Sander
• Heavy duty cast iron construction
• Powerful 1/2 HP, 120V motor
• Convenient top-mounted manual brake stops sanding disc
in seconds
• Heavy-duty, steel disc plate features a 12 in. diameter, 80
grit abrasive disc
• Tilting cast-iron table with left and right positive stops at
22.5°, 45° and 90° locks in position with one dual-purpose
lock and bevel table adjustment handle
• Integral dust collection fan
• Dust hose with 2 1/4 in. O.D. connectors attaches quickly to
any standard shop vacuum
• Features a 3/8 in. x 3/4 in. miter gauge slot
• Cast-iron base with pre-drilled mounting holes
• Includes miter gauge, hose with 2 1/4 in. O.D. connectors,
80 Grit abrasive disc, wrenches
• CSA Listed
31-140
12 in. Disc Sander
31-481 Sander
• Industrial 3 HP, 230 V, 60 Hz, 1/6 HP, belt motor with
feed speeds from 3 FPM to 20 FPM; drum speed 1,550
RPM
• Independent adjustment dials ensure rear drum is
level
• Heavy duty steel frame design
• Latching top door provides direct access to dual
drums
• Tool-less drum wrap tensioning clamps
• Magnetic on/off main motor switch
• Two 4 in. dust ports for efficient dust collection
requiring a total of only 600 CFM includes feed belt,
sanding drums, 80 grit and 120 grit sanding strips
• CSA Listed
31-481
26 in. Dual Drum Sander
16
Sanders
31-482 Sander
• Powerful 1 1/2 HP, dual voltage 115V/230V (wired
230V), 1 phase motor with 3,900 SFPM belt speed and
108 OPM
• 1/4 in. belt oscillation
• Table height easily adjusts to position workpiece on
the sanding belt
• Allows contour and inside curve sanding using the 9
3/4 in. x 11 3/4 in. cast iron table attachment around the
4 1/4 in. end pulley
• Adjustable 24 in. x 4 in. fence for horizontal sanding
• Precision ground steel platen with graphite pad helps
keep the platen cool during operation
• Large, 29 3/4 in. x 10 in. cast iron support table with
T-slot
• Convenient, top-mounted tensioning lever and
tracking controls
• Integral dust shroud and 4 in. dust port
• Includes back stop, sanding drum cast iron support
table, miter gauge, tracking tool, fence, 6 in x 89 in. 100
grit sanding belt, and adjustment tools/wrenches
• CSA Listed
Stock No.
Description
31-482
6 in. x 89 in. Oscillating Edge Sander
31-483 Sander
• Powerful 1/2 HP, 115V motor
• Fully enclosed, heavy duty steel frame construction
• 14 3/4 in. x 14 3/4 in. precision ground cast iron table
• 15/16 in. oscillating action uses more of the sleeve,
prolonging life of the sleeve
• 0° to 45° tilting table design
• Positive stop at 90° and large bevel scale
• Heavy duty, steel table support and bevel system
• Smooth precision ball bearings support the main
spindle
• Worm and gear mechanism drives the oscillations
• On-tool storage for accessories
• Includes 5 interchangeable threaded spindles with
100 grit sanding sleeves (1/4 in., 1/2 in., 5/8 in., 1 1/2 in.,
and 2 in.), rubber drums on 1 1/2 in. and 2 in. spindles,
4 inserts, power lock-off pin, 2 1/4 in. to 4 in. dust port
adapter and 3 wrenches
• CSA Listed
Stock No.
Description
31-483
Heavy Duty Oscillating Bench Spindle Sander
17
Sanders
SA350K Sander
• Large, cast-iron table measures 18 in. diameter
• Powerful 1/4 HP induction motor with direct drive for
quiet, smooth operation.
• Built-in dust collection fan
• Toggle switch with removable lock out key prevents
unauthorized use
• Comes complete with table insert for accepting
standard-equipment 3/4 in. diameter sanding drum and
sleeve
• Four accessory table inserts are also available for
using sanding drums from 1-3 in. in diameter
• On tool storage for accessories
• The SA350K includes 1/4 HP, 1 Phase Motor, cast-iron
table with 4 1/2 in. long x 3/4 in., 1 in., 1 1/2 in., 2 in. and
3 in. rubber spindles, drum plates, abrasive sleeves and
table inserts, dust bag, 3/16 in. Allen Wrench, 1/2 in.
socket wrench, 3/4 in. spindle converts to 1/2 in. when
rubber drum is removed
• CSA Listed
Stock No.
Description
SA350K
Bench Oscillating Spindle Sander with Accessory Kit
31-484 Sander
• Powerful 1 HP, 115V motor
• Fully enclosed, heavy duty steel frame construction
• 24 5/8 in. x 24 1/2 in. precision ground cast iron
table
• 1 1/2 in. oscillating action
• Unique 0° to 45° tilting spindle arbor design
• Adjustable positive stops at 45° and 90° and large
bevel scale for accuracy and convenience
• Heavy duty, cast iron trunnion system
• Oil bath gear box
• Smooth precision ball bearings support the main
spindle and heavy duty worm and gear mechanism
drives the oscillations
• Removable rear access panel fix adjustable spindle
• Cast iron, chrome polished tilt wheel
• On-tool storage for all inserts, spindles and
wrenches Includes 10 interchangeable threaded
spindles with 100 grit sanding sleeves (1/4 in., 3/8 in.,
1/2 in., 5/8 in., 3/4 in., 1 in., 1 1/2 in., 2 in., 3 in., and 4
in.), 6 inserts, power lock-off pin and 2 wrenches
• CSA Listed
Stock No.
31-484
Description
Heavy Duty Oscillating Floor Spindle Sander
18
Accessories
Spindle Sleeves
Model #
19
Size
31-270
4 in. x 9 in. 80 Grit 3 PC. Aluminum Oxide Spindle Sanding Sleeves
31-271
4 in x 9 in. 120 Grit 3 PC. Aluminum Oxide Spindle Sanding Sleeves
31-272
4 in x 9 in. 150 Grit 3 PC. Aluminum Oxide Spindle Sanding Sleeves
31-488
6 PC. 120 Grit Aluminum Oxide Sanding Sleeves- Size Assortment
31-489
3 in. Heavy Duty Oscillating Bench Spindle Sander Drum and Sleeve Kit
31-490
6 PC. 120 Grit Aluminum Oxide Sanding Sleeves- Size Assortment
31-736
3/4 in. Bench Oscillating Spindle Sander Drum/Sleeve Kit
31-737
1 in. Bench Oscillating Spindle Sander Drum/Sleeve Kit
31-738
1 1/2 in. Bench Oscillating Spindle Sander Drum/Sleeve Kit
31-739
31-740
31-741
5 PC. Bench Oscillating Spindle Sander Drum/Sleeve Kit
31-788
6 PC. 1/2 in. x 4 1/2 in. 80 Grit Spindle Sanding Sleeves
31-789
31-790
31-792
31-793
31-794
31-796
31-797
6 PC. 1 in. x 4 1/2 in. 120 Grit Spindle Sanding Sleeves
31-798
31-805
6 PC. 1 1/2 in. x 4 1/2 in. 80 Grit Spindle Sanding Sleeves
31-806
31-807
31-808
31-809
31-810
31-811
31-812
31-813
31-850
6 PC. 1/4 in. x 6 in. 80 Grit Spindle Sanding Sleeves
31-851
31-852
31-853
31-854
31-855
31-857
31-870
31-880
3 PC. 3in. x 9 in. 80 Grit Spindle Sanding Sleeves
Accessories
Stick-On Discs
Model #
Size
31-346
31-347
31-348
31-421
8 in. 50 Grit 2 PC. Aluminum Oxide Stick-On Discs
31-422 12 in. 80 Grit 2 PC. Aluminum Oxide Stick-On Discs
31-423
Strips
Model #
31-485
31-486
31-817
31-818
31-819
31-822
31-833
Size
4 PC. Aluminum Oxide Sanding Strips-Grit Assortment
3 PC. Aluminum Oxide Sanding Strips-Grit Assortment
4 PC. 2 in. x 137 7/8 in. 80 Grit Aluminum Oxide Sanding Strips
3 PC. 5 1/8 in. x 92 1/2 in. 150 Grit Aluminum Oxide Sanding Strips
Sanding Belts
Model #
31-371
31-372
31-373
31-375
31-386
31-387
31-388
31-389
31-398
31-400
31-404
31-405
31-406
31-407
31-814
Size
1 in. x 42 in. 50 Grit 5 PC. Aluminum Oxide Sanding Belt
6 in. x 89 in. 80 Grit Aluminum Oxide Sanding Belt
36 in. Drum Sander Conveyor Belt
20
Lathe
1
46-460 Lathe
#
• Powerful 1 HP, 1,725 RPM Motor
• Large 12 1/2 in. swing capacity provides the largest capacity in its
class
• Electronic Variable Speed with three-pulley speed ranges provide
the required speeds needed to turn a project without changing belt
position
• Forward and Reversing function with a simple flip of the switch
• Patented belt tensioning system for easy and quick speed changes
• 6 groove belt provides superior power
• Indexing pin to lock the head stock spindle in 24 different locations
• All cast-iron construction provides stability and durability
• Over Headstock on/off switch provides easy in use access
• Ball-bearing live center
• Includes 3 in. face plate, 6 in. tool rest and 10 in. tool rest
• Heavy-duty, steel knockout bar
• CSA Listed
Rated Best Lathe
in 2014
46-46012 1/2 in. Variable Speed MIDI-LATHE
®
Accessories
(Check website for availability) *
46-407
Midi Inboard French
Curl Tool Support
46-461
Nova Chuck
46-490
Tailstock Ball
Bearing Center
21
46-462
MIDI-LATHE® Stand
46-626
6 PC. High-Speed Steel
Turning Tools Set
46-463
MIDI-LATHE® Modular
Bed Extension
46-712
Economy Live Center
46-464
MIDI-LATHE® Modular
Stand Extension
46-933
Spur Drive
Grinding & Sharpening
23-196 Grinder
• Variable Speed Control
• Upfront variable speed dial, control speeds from 2,000
RPM to 3,400 RPM
• Features a 2 1/2 Amp induction-type motor for powerful
performance
• The left tool rest has a drill bit rest at the correct angle
• Two piece tool rests are independently adjustable
• Water tray to help keep workpiece cool while grinding
• Work light with a separate on/off switch and flexible
goose neck
• Cast iron base for durability and reduced vibration
• Full-size safety shields are clear and have thumb screws
for easy adjustment
• Includes 36 Grit Coarse Wheel, 60 Grit Wheel, safety
shields, work light (bulb not included), and fully-adjustable
tool rests
• ETL Listed
Stock No.
Description
23-196
6 in. Variable Speed Grinder
23-197 Grinder
• Variable Speed Control
• Upfront variable speed dial, control speeds from 2,000
RPM to 3,400 RPM
• Features a 5 Amp induction-type motor for powerful
performance
• The left tool rest has a drill bit rest at the correct angle
• Two piece tool rests are independently adjustable
• Water tray to help keep workpiece cool while grinding
• Work light with a separate on/off switch and flexible
goose neck
• Cast iron base for durability and reduced vibration
• Full-size safety shields are clear and have thumb screws
for easy adjustment
• Includes 36 Grit Coarse Wheel, 60 Grit Wheel, safety
shields, work light (bulb not included), and fully-adjustable
tool rests
• ETL Listed
Stock No.
Description
23-197
8 in. Variable Speed Grinder
22
Drilling & Boring Machines
14-651 Mortiser
• Easy and open access to drill chuck for bit changing
• Adjustable fence and hold down
• Gas-filled head-stabilizer
• Height attachment adds 1 3/4 in. of additional
capacity under head
• Adjustable depth stop
• Chuck key/hex wrench for bit and chisel changing
• CSA Listed
Stock No.
Description
14-651
1/2 HP Mortiser
18-900L Drill Press
• Full 6 in. Quill Stroke
• Auto-Tensioning Belt Drive System
• Micro-Adjustable Depth Stops and Independent
Depth Scale allows the user to zero and set up for
repetitive drilling
• Fully Adjustable TWINLASER™projects a bright red
crosshair on the work piece at the point of bit contact
• Flexible LED Work Light
• CSA Listed
Stock No.
Description
18-900L
18 in. Laser Drill Press
23
Accessories
Model #
17-001
17-002
17-003
17-004
Size
1/4 in. Professional Mortising Chisel and Bit Set
Model #
Size
20-619
20-622
20-621
6” Quick-Release Drill Press Vise
4” Quick-Release Drill Press Vise
4” Drill Press Vise
Model #
Size
32-280
32-281
One 5mm (.197’) R.H. Brand Point Boring Bit
One 5mm (.197’) L.H. Brand Point Boring Bit
17-005
17-924
4 PC. Professional Mortising Chisel
and Bit Set
Mortising Attachment with
Four Chisel and Bit Set
17-940
17-985
Drill Press Shield
(Drill Press shown
as an example)
25-Piece Sanding Drum Kit
18-901
Drill Press Fence
24
Dust Management
Comming mid 2015
50-767
50-723
Dust Collectors
• Standard 1 micron filtration bags keep your
shop safer and cleaner
• 8” rubber wheels for smooth mobility
• Precision spin-balanced alloy forged impeller
• Powerful TEFC induction motor
• Sewn in, snap-in filter bag ring for easier
installation
• CSA Listed
1-1/2 HP
120/240V
1 HP
120/240V
(50-767)
(50-723)
Stock No.
50-723
50-767
Description
1 HP 750 CFM Dust Collector
1.5 HP 1500 CFM Dust Collector
50-873 Air Cleaner
• 1/5 HP 115V single phase motor
• Push Button/Remote Control switch also equipped
with pull chain E-stop
• 5 micron outer filter and 1 micron inner filter
• Air turn over for room 20’x 20’x 8’= 22 times per hour
• CSA Listed
Stock No.
Description
50-873
3 Speed Air Cleaner 540-1200 CFM
25
Accessories
Dust System Components
Model #
Size
49-220
50-196
50-359
50-446
50-449 50-452
50-457
50-476
50-479
50-482
50-906
2-1/4” to 1-1/2” Reducer
4”-5” Quick Disconnect
Dust Hood
Dust Hood
4” Plastic Y Connector
4” Plastic Elbow
4” Plastic Splice
4” Blast Gate
5” x 4” Reducer
4”-2-1/4” Adapter
Dust Collector Floor Sweep Attachment
Dust Collector
Model #
Size
50-364
50-365
50-721
50-722
Accessory Plastic Bags
Plastic Bag
Disposable Bottom Bags
1 Micron Replacement Filter Bag
50-736 Dust Bag
50-737
Chip Bag
50-831
30 Micron Dust Bag
50-890
1 Micron Filter Bag
50-891
6 Mil Lower Collection Replacement Bag for 50-786/50-760
50-766
Canister for 50-723/50-767
Hoses
Model #
Size
50-495
50-530
50-531
4” Steel Hose Clamp
4” DIA. x 10’ Hose
4” DIA. x 20’ Hose
Filters
Model #
50-784
50-858
50-859
50-865
Size
1 Micron Pleated Canister Filter
Pleated Outer Pre-Filter
Three Pocket Inner Filter
Electrostatic Filter
26
HOMECRAFT
H26-260L Miter Saw
• Lightweight unit is easy to move from room to room or
even from job to job
• Works with virtually all miter saw stands
• Spindle lock holds spindle securely while blade nut is
loosened and removed
• Capacity- Cuts nominal 4 x 4 and 2 x 6 at 90° and 2 x 6 at
bevel setting, with one pass
• UL Listed
This is a good little Miter saw for the money. Build
quality is solid. Accuracy is great. Over all I am quite
pleased by the value. Unless you are willing to jump
many hundreds of dollars in price, this is as good
as you are likely to need for most home, yard, etc.
projects. Highly recommended.
-Customer Review, Amazon.com
Bevel
Miter Scale
Laser Guide
Bevels Left- From 0°47°, cuts nominal 2 x 6
at full bevel
Miters to 45° degrees
left and right stops at 0°,
15°, 22.5°, 30°, and 45°
Battery Operated
with on/off switch.
Makes aligning blade
to workpiece more
convenient and precise
Stock No.
Description
H26-260L
Homecraft 10 in. Miter Saw
27
Nationwide Dealers Network
Locations Indicated on Map Below
DELTA Corporate Office
Local Dealers
For location of nearest dealer, please see www.deltamachinery.com/buy-now
You may also call Delta Customer Care at 1-800-223-7278 for nearest location.
28
Here’s The Real Proof That
DELTA® Means Quality
Look for the Delta® Seal of Quality (above) displayed on or in connection with DELTA®,
HOMECRAFT® and BEISEMEYER® brand power equipment products as your guide to the duration
of the Limited Warranty accompanying your product. For more information on our warranties
please visit, http://www.deltamachinery.com/service-support/warranties.
2015 Catalog
FOR MORE INFORMATION
VISIT DELTAMACHINERY.COM
OFFER AVAILABLE AT PARTICIPATING DEALERS ONLY WHILE SUPPLIES LAST. DELTA reserves
the right to correct any pricing, product specifications or image discrepancies.
©2015 DELTA Power Equipment Corporation All Rights Reserved. Printed in the U.S.A.

PDF - Delta Machinery

Transcription

Similar documents

PAGE SIX June 10, 2002

One (1) Preowned Nardini 1760E Gap Bed Engine Lathe

Festool Abrasives Brochure

True Grits - Woodcraft Magazine

Planer CE223X DUO

shaping styrofoam

May 2016

Finishing A to Z Beyond the Books

Floor Finishing System Brochure - Rust