Contents - Wagtech Projects Ltd

Transcription

Contents
Section
Pages
Water Quality Testing
1 to 54
Hydrology & Groundwater
55 to 66
Soil / Sediment Sampling & Analysis
67 to 84
Meteorology
85 to 98
Toxic Gas Detection
99 to 104
Air / Dust Sampling & Monitoring
105 to 110
Air Quality Monitoring
111 to 120
Noise & Vibration Monitoring
121 to 124
Laboratory Analytical Equipment
125 to 131
Mobile Laboratories
132 to 138
Training
139
Water quality is the physical, chemical and micro
biological characteristics of water.
It is a measure of the condition of water relative to
the requirements of one or more biotic species and
any human need or purpose.
It is most frequently used by reference to a set of
standards which are used to assess water quality
relative to the health of ecosystems, safety of human
contact and drinking water.
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Air/ Dust
Sampling &
Monitoring
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Hydrology & Water Quality
Sampling & Groundwater
Testing
Analysis
1
www.wagtechprojects.com
[email protected]
Telephone: +44 (0)1635 872 929
EN15-102
Portable testing laboratory designed to assess the suitability of drinking water
on-site, even in remote areas.
Potalab® 1 is a portable microbiological and physico-chemical testing
laboratory. It provides bacteriological testing using the accepted method of
membrane filtration and incubation of faecal and total coliforms as an indicator
of the presence of other harmful bacteria and viruses. The physico-chemical
instruments are used in combination to quickly examine a supply to determine if
a more detailed microbiological examination is required. All equipment is
easily packed within the aluminium case for complete portability.
Potalab 1 measures the following parameters; Faecal & Total Coliforms, pH,
Conductivity, Turbidity, Chlorine, Nitrates, Nitrites, Ammonia, Fluorides
and Arsenic
EN15-104
Meteorology
• For combined microbiological, physico-chemical testing in the lab or field
• Wide range of physico-chemical parameters can be measured using
highly accurate digital instruments
• More cost effective than central laboratory testing
• Simple technique - dual incubator allows analysis of both faecal & total
coliforms simultaneously
• Results incubated in just 14 hours
• Completely portable - even runs off solar power
• Uses low cost, long-life consumables, and equipment is easily sterilised in the field
• Supplied with reagents for Ammonia, Arsenic, Chlorine, Fluorides, Nitrites and Nitrates as standard. Other parameters are listed on page 5.
• Conforms to WHO Guidelines
Soil /
Water Quality Hydrology &
Sediment
Testing
Groundwater Sampling &
Analysis
Portable Advanced Water Testing Laboratory
Toxic Gas
Detection
Air / Dust
Sampling &
Monitoring
Potalab® 2 provides the same equipment and facilities as Potalab® 1, but
without the physico-chemical instrumentation. The purpose of this unit is for
microbiological testing only.
Air Quality
Monitoring
EN15-102
Noise &
Vibration
Monitoring
Laboratory
Analytical
Equipment
Mobile
Laboratories
Training
Telephone: +44 (0)1635 872 929
[email protected]
2
Soil /
Sediment
Testing
Analysis
Potalab® continued...
Bacteriological Testing:
The bacteriological filtration unit is supplied with a pistol grip vacuum
pump, sampling cup and line, alongside 200 pads, gridded membranes and
38.1g membrane lauryl sulphate broth.
Digital Dual Incubator:
Microbiological testing is carried out using twin incubators for simultaneous
incubation of Faecal and Total Coliforms if required. The temperature is digitally
controlled and preset to 37oC and 44oC with an accuracy of ±0.1oC.
Meteorology
• Holds 2 racks of 25 petri-dishes allowing for up to 50 test’s
at any one time
• Features digital automatic timer facility for logging the incubation period in case of power failure
• Fully portable can be powered by mains, internal battery, vehicle battery
(cigarette lighter lead supplied) and solar power
Temperature Range, °C
20 to 50 with preset levels at
37 or 44, automatic timer
Display
Clear digital LCD, 0.1oC resolution
Capacity
2 x 25 aluminium dishes, 2 x 8 plastic / glass dishes
Accuracy, oC
±0.1
Mains Power (AC)
220-240V, 50Hz, 110V, 60Hz,
Battery Power (DC)
Integral 12V re-chargeable battery through lead with crocodile clips and
vehicle cigarette lighter socket plug
Dimensions, mm
200 x 180 x 220
Weight, Kg
6
Purchase Specifications
EN15-114
Portable Photometer
Potalab® 1 comprises the following components: Twin incubator with digital
temperature display and automatic timer facility. 50 re-usable aluminium petri
dishes. (inc: petri dish rack). Electrical leads for AC110 / 220V operation, DC
operation via vehicle cigarette lighter and crocodile leads along with separate
re-chargeable battery (external to incubator, but internal to carrying case).
Membrane filtration unit including collection flask, sampling cup, land line
plus bronze disk, gaskets, O-rings, and pistol grip vacuum pump. 200 pads and
membranes with pad dispenser, 38.1g membrane lauryl sulphate broth for 200
tests, 5 unique media measuring devices (mmd) for measuring precise amounts
of lauryl sulphate broth (i.e, 10 tests only). Tweezers, 5 dropping pipettes, 4
autoclavable plastic bottles, hand lens, lighter, pen, clippers, screwdriver and a
tube of lubrication grease.
Conductivity / TDS Meter, pH / Temp / mV meter and a digital turbidity meter.
Portable Photometer with reagents for chlorine, nitrates, nitrites, ammonia and
fluorides. Digital Arsenator inc: filters, tablets and filter holders, sufficient for 200
Arsenic tests.
Catalogue No
Model
Description
EN15-102
Potalab 1
Portable water testing laboratory for microbiological
and physico-chemical testing (weight 20Kg)
EN15-104
Potalab® 2
For microbiological testing only (weight 18Kg)
®
Accessories
EN15-430
Membrane Filtration Kit
EN15-432
Pad Dispenser
EN15-434
Aluminuim Petri Dishes, Pack of 25
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Air / Dust
Sampling &
Monitoring
Toxic Gas
Detection
Specification
3
[email protected]
Telephone: +44 (0)1635 872 929
EN16-162
The following instruments are supplied as standard in the Potalab® 1
to enable the measurement of specific parameters for this analysis:
Turbidity Meter | pH / temp / mV Meter | Conductivity / TDS Meter
Digital Arsenator | Portable Photometer
Turbidity Meter
Specification
Range
0 to 1000 NTU
Resolution
0.01, 0.1, 1 NTU (dependant on measurement & range)
Accuracy
±2% / ±3% of reading
Calibration
Push button at 0.02, 20.0, 100 & 800 NTU
Dimensions, mm /
Weight, g
68(W) x 155(L) x 46(H) / 200
Power
4 x AAA Batteries
Catalogue No
EN16-162
EN16-111
Soil /
Sediment
Testing
Analysis
Physico-Chemical Analysis
Meteorology
Supplied with calibration kit
pH / °C / mV Meter
Specification
Toxic Gas
Detection
0.01 & ±0.01 pH
mV Range
±199.9 mV & ±1999 mV (Extended)
Resolution & Accuracy
0.1 mV & ±0.2 mV (within ±199.9 mV);
1 mV & ±2 mV (beyond ±199.9 mV)
Temperature Range
-10 to 110 °C
0.1 °C & ±0.5 °C
No. of Calibration Points
Up to 5 points
Temperature Compensation
Automatic / Manual (0 to 100 °C)
Power
4 ‘AAA’ x 1.4V batteries or 9VDC power adaptor
Supplied with electrodes and buffer solutions.
Catalogue No
EN16-111
EN16-136
Conductivity / TDS / °C Hand Held Meter
Specification
TDS
Temperature
0 to 19.99, 20 to199.9, 200
to1999 µS/cm;
2.00 to 19.99,
20.0 to 199.9 mS/cm
0 to 9.9, 10 to 99.9,
100 to 999 ppm;
1.00 to 9.99, 10.0 to
99.9ppt
-10ºC to 110ºC
Resolution
0.01, 0.1, 1µS;
0.01, 0.1mS
0.01, 0.1, 1ppm; 0.01,
0.1ppt
0.1°C
Accuracy
±0.2, 2, 20µS/cm;
±0.2,2mS/cm
±0.1, 1, 10ppm;
±0.1, 1ppt
±0.5oC
Calibration
up to 5 points (1 per range)
0.40 to 1.00
—
TDS Factor
4 x 1.4V batteries or 9VDC power adaptor
Supplied with calibration standards.
Catalogue No
EN16-136
EN15-502
Digital Arsenator
Specification
2-100 ppb
Timing Facility
Up to 40 minutes
Display
LCD digital
Power
PP3 9v Battery (included)
Resolution
0.001au
Catalogue No
EN15-502
Telephone: +44 (0)1635 872 929
Training
Range
Mobile
Laboratories
Power
Laboratory
Analytical
Equipment
Conductivity
Range
Noise &
Vibration
Monitoring
Measurement
Air Quality
Monitoring
-2.00 to 16.00
Air / Dust
Sampling &
Monitoring
pH Range
[email protected]
4
Soil/
Sediment
Testing
Analysis
Potalab® continued...
EN15-114
Portable Photometer
The Potalab Photometer offers a precise modern means of water analysis using
an advanced solid-state digital readout colorimeter.
The Photometer is fully integrated with water analysis systems. It offers a great
value instrumental analysis for an extensive range of water tests.
The Photometer accurately assesses the colour formed in the test sample and
displays the readings directly in concentration units on its large LCD screen
- no more inaccurate results due to variation in operator eyesight or lighting
conditions.
Direct reading colorimeter with automatic set up
Operating wavelengths
450nm 500nm 550nm 575nm 600nm 650nm
Meteorology
Display
Large Backlit graphic LCD screen
Accuracy
± 0.5% at 4% transmittance
Resolution
0.001au
User selectable options
Display language (French, German, Spanish, English, Italian) Test units
Test cells
Automatic adjustment for round test tubes from
12-20mm diameter
Power
Battery power (3 x AA)
Dimensions (WxDxH),
mm
146 x 275 x 75
Instrument rating
Waterproof (IP67)
Catalogue No
Description
EN15-114
Portable Photometer
Air/ Dust
Sampling &
Monitoring
Instrument Type
Toxic Gas
Detection
Specification
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Reagents for use with Photometer
Test
Range mg/I
Catalogue No
Test
Range mg/I
Catalogue No
Alkalinity, total (Alkaphot)
0 — 500
EN15-116
Hydrogen Peroxide HR
0 — 100
EN15-154
Alkalinity M (Alkaphot M)
0 — 500
EN15-118
Iron LR
0 — 1.0
EN15-156
Alkalinity P (Alkaphot P)
0 — 500
EN15-120
Iron HR
0 — 10
EN15-158
Aluminium
0 — 0.5
EN15-122
Magnesium (Magnecol)
0 — 100
EN15-160
Ammonia
0 — 1.0 (n)
EN15-124
Manganese
0 — 0.03
EN15-162
Boron
0 — 2.5
EN15-126
Molybdate LR
0 — 15
EN15-164
Bromine
0 — 6.0
EN15-128
Molybdate HR
0 — 100
EN15-166
Calcium Hardness (Calcicol)
0 — 0.5 (n)
EN15-130
Nitrate (nitratest)
0 — 20 (n)
EN15-168
Chloride
0 — 5.0
EN15-132
Nitrite (nitricol)
0 — 0.5 (n)
EN15-170
Chlorine DPD 1
0 — 5.0
EN15-134
Nitrite (nitriphot)
0 — 1500
EN15-172
Chlorine DPD 2
(Free, Mono & Di chloroamine)
0 — 5.0
EN15-136
Organophosphate
0 — 20
EN15-174
Chlorine DPD 3
(Free, Combined & Total)
0 — 5.0
EN15-138
Ozone
0 — 2.0
EN15-176
pH (Phenol Red)
6.8 — 8.4
EN15-178
Chlorine DPD 4
0 — 5.0
EN15-139
Phenol
0 — 5.0
EN15-180
EN15-140
Phosphate LR
0 — 4.0
EN15-182
EN15-142
Phosphate HR
0 — 100
EN15-184
Potassium
0 — 12
EN15-186
Silica
0 — 4.0
EN15-188
Sulphate
0 — 200
EN15-190
EN15-150
Sulphide
0 — 0.5
EN15-192
EN15-152
Sulphite (Sulphitest)
0 — 500
EN15-194
Zinc
0 — 4.0
EN15-196
Chlorine HR
Chromism (Chromical)
*
Training
0 — 5.0
Copper (Coppercol)
0 — 5.0
EN15-144
Cyanuric Acid
0 — 200
EN15-146
Fluoride
0 — 1.5
EN15-148
Hardness (Hardicol)
Hydrogen Peroxide LR
5
0 — 250
0 — 500
0 — 2.0
*
*
*
*
Packs of 250
* Packs of 200
Full Set of Reagents
[email protected]
EN15-198
Telephone: +44 (0)1635 872 929
Portable testing laboratory designed to assess the suitability of drinking water
on-site, even in remote areas.
Capable of carrying out all the same tests as the Potalab, however the Potakit
features less sophisticated instrumentation which in many cases makes the
Potakit a more attractive and cost-effective choice.
Potakit ® 1 is a low-cost, fully portable microbiological and physico-chemical
testing kit designed to measure the key parameters of drinking water quality
in the field. The instruments in the Potakit use simple techniques with low cost
consumables to enable those with a non-technical background and minimum
training to obtain accurate test results.
Air / Dust
Sampling &
Monitoring
Air Quality
Monitoring
Potakit® 2 provides the same equipment and facilities as Potakit® 1, but
without the physico-chemical instrumentation. The purpose of this unit is for
microbiological testing only.
Toxic Gas
Detection
• Single incubator, capacity of 20 petri dishes, temperature switchable between
37 and 44ºC, allows incubation of either faecal or total coliforms
• Fully portable Incubator - can be powered via external rechargeable battery, AC mains operation, DC operation via vehicle lighter socket or even solar power
• Waterproof, digital pocket meters for pH and Conductivity
• Two part turbidity tube
• Colour Comparator for testing over 30 different chemical parameters
• Includes the VCDK arsenic testing device for the visual, quantitative analysis of arsenic to ppb levels
• Uses, long-life, low-cost reagents and consumables available locally through Wagtech Projects in-country representatives
• Supplied with reagents & consumables to carry out 200 microbiological tests and 200 tests each of Ammonia, Arsenic, Chlorine (DPD1 & 3), Fluoride, Nitrites and Nitrates
• Comprehensive but simple to use operation manuals for all instruments
• All components housed in a single, lockable, water-proof aluminium
carry case
Meteorology
Potakit® 1 measures the following parameters Faecal and Total Coliforms,
pH, Conductivity, Turbidity, Chlorine, Nitrates Nitrites, Ammonia,
Fluorides and Arsenic.
Soil /
Sediment
Testing
Analysis
Portable Basic Water Testing Laboratory
Noise &
Vibration
Monitoring
EN15-202
Laboratory
Analytical
Equipment
Mobile
Laboratories
Training
Telephone: +44 (0)1635 872 929
[email protected]
6
Potakit® continued...
Microbiological Analysis Potakit® 1& 2:
The Potakit® Incubator
This small single portable incubator will allow a complete and accurate
bacteriological analysis to be carried out in the field, for the analysis of
faecal and total coliforms (switchable between 37oC & 44oC).
• A total of 20 tests can be carried out at one time
• Petri Dishes held in aluminium racks for easy loading
• Totally portable — can run off mains, vehicle (cigarette lighter lead supplied)
and solar power
Specification
Temperature setting
Switchable between 37oC and 44oC
Capacity
20 Petri dishes
Accuracy, oC
±0.2
Mains power (AC)
220-240V, 50Hz, 110V, 60Hz,
Battery power (DC)
Integral 12V re-chargeable battery through lead with crocodile clips and
vehicle cigarette lighter socket plug
Dimensions, mm
155 x 230 x 200
Weight, Kg
3.3
Purchase Specifications
Potakit® 1 comprises the following components:
A single incubator, switchable between 37oC & 44oC, spirit thermometer, 20
re-usable aluminium petri dishes.
Power supply to incubator is via an integral 220 / 110V AC mains adaptor /
battery charger, electrical lead for 12V DC operation via vehicle dash board
cigarette lighter, and crocodile lead for use with re-chargeable battery.
Membrane filtration unit inc: (same specifications as supplied in Potalab except
hand pump is rubber vacuum type)
Pocket conductivity meter, pH meter, a 2 part turbidity tube, a colour
comparator with colour discs and reagents for 200 tests of Chlorine, Nitrates,
Ammonia, Nitrites and Fluorides; and the Visual Arsenic Kit (VCDK).
All of which is supplied in a robust aluminium case.
Catalogue No
Model
Description
EN15-202
Potakit 1
Portable water testing laboratory for microbiological
and physico-chemical testing (weight 10Kg)
EN15-204
Potakit® 2
For microbiological testing only (weight 9Kg)
®
Accessories
EN15-430
EN15-432
Pad Dispenser
EN15-434
Note:
For accessories, consumables and
spares for Water Test Kits - See page 12.
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Air / Dust
Sampling &
Monitoring
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Testing
Analysis
7
[email protected]
Telephone: +44 (0)1635 872 929
The following instruments are supplied as standard in the Potakit® 1
to enable the measurement of specific parameters for this analysis:
pH Meter | Conductivity Meter | Arsenic Detection kit (VCDK) |
Turbidity Tube | Colour Comparator
pH / °C Waterproof, Pocket Meter
EN16-102
Specification
Range
-1.0 to 15.0 pH
0.01 pH
Accuracy, C
± 0.5°C
Accuracy
3 pt (4.0, 7.0 or 10.0)
Calibration
3 pt (4.0, 7.0 or 10.0)
ATC
Yes
Electrode Type
Double junction
Battery Life
> 500 hrs
EN16-102
Waterproof pH Meter
o
Meteorology
Resolution
EN16-129
Specification
0.1µs/cm, 1µs, 0.01µs/cm
Accuracy, oC
± 1% of full scale
ATC
Yes
Temperature Display
0 To 50°C or 32 To 122°F
Temperature Calibration
Yes
Battery Life
> 150 hrs
EN16-129
Waterproof Conductivity Meter
EN15-1510
Noise &
Vibration
Monitoring
Visual Arsenic Detection Kit (VCDK)
This kit features a unique tri-filter arsenic trap which removes excess arsine gas
as well as any hydrogen sulphide which also may be given off as a by-product
of the reaction.
Description
EN15-510
EN15-512
2 Part acrylic tube, graduated 5 to 500 JTUs. Uses extinction method.
Catalogue No
Description
EN15-206
Turbidity Tube
Mobile
Laboratories
Turbidity Tube
Laboratory
Analytical
Equipment
•Colour Chart (readings up to 10-500 ppb)
•Sufficient filters tablets & filter holders to conduct up to 200 tests.
Catalogue No
Air Quality
Monitoring
Resolution
Air / Dust
Sampling &
Monitoring
To 200
Toxic Gas
Detection
Conductivity, Waterproof Pocket Meter
Multi Range
Soil /
Sediment
Testing
Analysis
Physio-Chemical Analysis
Training
Telephone: +44 (0)1635 872 929
[email protected]
8
Potakit® continued...
Colour Comparator Kit
EN15-214
The colour comparator is quick and easy to use and gives accurate reliable
results. The kit is used in conjunction with tablet reagents and colour charts to
test 32 different parameters. Just add a tablet reagent to the test sample, place
the tube in the comparator and match the colour against the appropriate colour
disc. The kit includes: comparator, 4 square cuvettes and dilution tube. The kit
contains no reagents or discs these should be ordered separately.
Catalogue No
Description
EN15-214
Colour Comparator kit
Comparator Reagents,
Pack 250 Tests
Colour Discs
Catalogue No
Test
Range, mg/l
Catalogue No
Test
Range, mg/l
EN15-216
Alkalinity (Alkavis) 0 — 250
0 — 250
EN15-278
Alkalinity (Alkavis) 0 — 250
0 — 250
EN15-218
Aluminium 0 — 0.5
0 — 0.5
EN15-280
Aluminium 0 — 0.5
0 — 0.5
EN15-220
Ammonia 0 — 1.0
0 — 1.0 (N)
EN15-282
Ammonia 0 — 1.0
0 — 1.0 (N)
EN15-222
Bromine 0 — 2.0
0 — 2.0
EN15-284
Bromine 0 — 2.0
0 — 2.0
EN15-224
Bromine 0 — 8.0
0 — 8.0
EN15-286
Bromine 0 — 8.0
0 — 8.0
EN15-226
Chlorine DPD 0 — 5.0
0 — 5.0
EN15-288
Chlorine DPD 0 — 5.0
0 — 5.0
Chlorine DPD
(Mono & Di Chloramine)
0 — 5.0
EN15-228
Chlorine DPD
(Mono & Di Chloramine)
0 — 5.0
EN15-290
EN15-230
Chlorine DPD
(combined & total)
0 — 5.0
EN15-292
Chlorine DPD
(combined & total)
0 — 5.0
EN15-232
Chlorine DPD (total)
0 — 50
EN15-294
Chlorine DPD (total)
0 — 50
EN15-234
Chlorine HR
0 — 50
EN15-296
Chlorine HR
0 — 250
EN15-236
Chlorine HR
0 — 250
EN15-298
Copper (Coppercol)
0 — 5.0
EN15-238
Copper (Coppercol)
0 — 5.0
EN15-300
Fluoride
0 — 1.5
EN15-240
Fluoride
0 — 1.5
EN15-302
Hydrazine Powder
0 — 0.5
EN15-242
0 — 2.0
EN15-304
0 — 2.0
EN15-244
0 — 100
EN15-306
0 — 100
EN15-246
Iron MR & LR
0—5
EN15-308
Iron LR
0 — 1.0
EN15-248
Manganese
0 — 0.03
EN15-310
Iron MR
0 — 10
EN15-250
Molybdate HR
0 — 100
EN15-312
Manganese
0 — 0.03
EN15-252
Nitrate (Nitratest)
0 — 20 (N)
EN15-314
Molybdate HR
0 — 100
EN15-254
Nitrite (Nitricol)
0 — 0.5 (N)
EN15-316
Nitrate (Nitratest)
0 — 20 (N)
EN15-256
Ozone
0 — 2.0
EN15-318
Nitrite (Nitricol)
0 — 0.5 (N)
EN15-258
pH value (Bromocresol Purple)
5.2 — 6.8
EN15-320
Ozone
0 — 2.0
EN15-260
pH value (Bromothymol Blue)
6.0 — 8.4
EN15-322
pH value (Bromocresol Purple)
5.2 — 6.8
EN15-262
pH value (Phenol Red)
6.8 — 8.4
EN15-324
pH value (Bromothymol Blue)
6.0 — 8.4
EN15-264
pH value (Thymol Blue)
8.0 — 9.6
EN15-326
pH value (Phenol Red)
6.8 — 8.4
EN15-266
pH value (Universal pH)
4.0 — 11.0
EN15-328
pH value (Thymol Blue)
8.0 — 9.6
EN15-268
Phosphate LR
0 — 4.0
EN15-330
pH value (Universal pH)
4.0 — 11.0
EN15-270
Phosphate HR
0 — 100
EN15-332
Phosphate LR
0 — 4.0
EN15-272
Silica
0 — 4.0
EN15-334
Phosphate HR
0 — 100
EN15-274
Sulphide
0 — 0.5
EN15-336
Silica
0 — 4.0
EN15-276
Zinc
0 — 4.0
EN15-338
Sulphide
0 — 0.5
EN15-340
Zinc
0 — 4.0
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Air / Dust
Sampling &
Monitoring
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Testing
Analysis
9
[email protected]
Telephone: +44 (0)1635 872 929
EN15-114
Catalogue No
Description
EN15-400
CP1000 Portable Physico-Chemical Test Kit
Accessories for Physico-Chemical Test Kit
Public health testing reagent starter pack, comprising of full set of
reagents (page 5)
EN15-402
Groundwater testing reagent starter pack, cosisting of reagent for;
Arsenic (page 14), Calcium Hardness (calcicol), chloride, chlorine (free,
combined & Total), copper, fluoride, hardness (hardicol), iron LR, Iron
HR, Magnesium (magnecol), Manganese, Nitrate (Nitratest), Nitrite (
Nitricol), Phosphate HR, Silica, Sulphate and Zinc (page 5). Supplied with
Wag-Sack for ease of transport and storage.
EN15-502
EN15-400
Noise &
Vibration
Monitoring
Description
EN15-198
EN16-136
Air Quality
Monitoring
Catalogue No
EN16-111
Air / Dust
Sampling &
Monitoring
components:
• Conductivity Calibration Kit
• Turbidity Standard
• Plastic bottles, autoclavable 60ml
• Aluminium carrying case
• Training procedure manual
• Full operating instructions
• Water quality report sheets
• Digital Arsenator
Toxic Gas
Detection
This Kit comprises of the following
• Portable Photometer
• Round test tubes (pack of 5) • Test tube rack
• Conductivity / TDS meter
• pH / temp / mV meter
• Portable turbidity meter
• Calibration screwdrivers
• pH calibration kit
EN16-162
Meteorology
This kit has been specifically designed for testing a wide range of
physical & chemical water quality parameters. The kit contains a carefully
selected range of high quality digital instruments that makes it ideally
suited for field based drilling engineers and groundwater testing
applications.
The kit is based around the Portable Photometer. It is capable of the analysis
of over 40 different chemical parameters. It is fully portable, waterproof,
and features pre-programmed test methods and touch screen operation. It
provides instant and highly accurate results.
pH and Conductivity / TDS are measured using separate, waterproof,
hand-held meters.
Turbidity is measured using a waterproof, hand-held digital meter.
It is accurate in the range 0-1000NTU.
Also includes the Digital Arsenator — the worlds only digital field instrument
for the determination of arsenic in water down to ppb levels.
Supplied with all the necessary calibration consumables & solutions, dilution
tube, full operating instructions and water quality report sheets.
All components are housed in a waterproof, lightweight carry case for easy
handling and storage.
Soil /
Sediment
Testing
Analysis
Portable Physico-Chemical Test Kit
Laboratory
Analytical
Equipment
Mobile
Laboratories
EN15-402
Training
Telephone: +44 (0)1635 872 929
[email protected]
10
EN15-403
Portable Microbiological
Water Testing Laboratory
The Potaflex® portable microbiological laboratory has been designed in
conjunction with ICRC and is an ideal resource for testing microbiological
parameters in the field. The unique Flexi Rack System provides the user with
a wide range of media options to suit their preferences and ensures the
maximum amount of tests can be performed at any one time.
• Fully portable - specially designed for field use
• Extremely versatile - can test for a variety of bacteria, including: Pseudomonas, Faecal Streptococci, Coliforms. (Faecal and Total Coliforms)
• Flexi media options - wide range of pre-prepared dip slides and nutri disks
can be tested
• Meets WHO & EU guidelines
• Pre-prepared dip slides are simply dipped into the water sample, inserted
into the unit and then placed into the incubator
The Flexi Rack System (FRS)
This is a unique device that allows the analysis of different microbiological
parameters using different methods and materials simply choose between
re-usable aluminium petri dishes, pre-prepared nutri disks, pre-prepared dip
slides or a combination of each. The unit can accommodate either 20 disposable
nutri disks, up to 40 re-usable aluminium petri dishes or up to 10 dip slides.
Membrane Filtration System
A membrane filtration unit is supplied as standard with the Potaflex® System.
Easily sterilised and consists of:
• A collection flask
• Sample cup
• Bronze disk
• Gaskets & O rings
• Land line
• Pistol grip vacuum pump
EN15-403
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Air / Dust
Sampling &
Monitoring
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Testing
Analysis
11
[email protected]
Telephone: +44 (0)1635 872 929
Specification
Temperature range
20oC to 50oC variable
Display
LCD clear digital
Capacity
40 Aluminium petri dishes, 20 nutri disks, 10 dip slides
Accuracy
±0.1oC
Mains power (AC)
12V DC Power supply to incubator is via an integral
230V AC mains adaptor, plus electrical lead for 12V DC operation via
vehicle cigarette lighter.
Dimensions, mm
Internal: 130 x 150 x 110
External: 200 x 250 x 180
Weight, Kg
4
Model
Description
EN15-403
Potaflex®
Portable Water Microbiological Laboratory. (weight 10Kg)
Accessories, Consumables & Spares for Water Test Kits
Catalogue No
Description
Air / Dust
Sampling &
Monitoring
Catalogue No
Toxic Gas
Detection
Potaflex® comprises the following components: 2 litre incubator, with digital
temperature display. Flexible Rack System (FRS), 20 aluminium petri dishes,
5x Media Measuring Device (MMD), 200 pads, membranes and 38.1g membrane
lauryl sulphate broth. AC mains lead and vehicle battery cigarette lighter lead.
Membrane filtration unit includes: collection flask, sampling cup, 2m land line
plus bronze disk, gaskets, O-rings, and pistol grip vacuum pump. Tweezers,
5 dropping pipettes, 4 plastic bottles, hand lens, lighter, pen, clippers,
screwdriver and a tube of lubrication grease. All of which is housed in a rugged
lockable aluminium flight case.
Meteorology
Purchase Specification
Soil /
Sediment
Testing
Analysis
Potaflex® Incubator System:
The incubator unit is located within a sturdy carrying case and has a temperature
range of +20oC to 50oC. Typically temperatures are set at 37oC for total
coliforms and 44oC for faecal coliforms and faecal streptococci. However
the flexible range can be set at other temperatures such as 42oC for
pseudomonas.
Accessories
EN15-406
Portable Steam Steriliser, Capacity 24 litres, non electric
EN15-408
EN15-410
Glassware & Consumables pack consisting of flasks, beakers, burettes,
sampling bottles, pipettes, measuring cylinders, water deioniser, top
pan balance, portable 14L steriliser, and miscellaneous laboratory
accessories.
Consumables
EN15-414
Cetrimide nutri disks for the detection of Pseudomonas Aeruginosa in
water and foodstuffs. (pack of 100)
EN15-416
M-FC nutri disks for the detection of E.Coli and faecal coliforms in water
and foodstuffs. (pack of 100)
EN15-418
Plate count nutri disks for the determination of colony counts in water,
milk and food. (pack of 100)
EN15-420
Coliform starter pack comprising grid membranes, pads and growth
medium. (for 200 tests)
EN15-422
Lauryl Sulphate Broth tub of 38.1g (for 200 tests)
EN15-424
Absorbent pads and membranes (for 200 tests)
EN15-426
Pre-prepared dip slides, sterilised gridded dip slides, impregnated with
coliform media.(pack of 25)
EN15-428
Faecal Streptococci Starter Pack
Spares
EN15-432
Pad Dispenser
EN15-434
EN15-438
Sterile Plastic Petri Dishes, Pack of 200
Telephone: +44 (0)1635 872 929
Training
EN15-430
Mobile
Laboratories
Azide nutri disks for the detection of faecal streptocci in water and
foodstuffs. (pack of 100)
Laboratory
Analytical
Equipment
EN15-412
Noise &
Vibration
Monitoring
Air Quality
Monitoring
EN15-404
[email protected]
12
EN15-502
Arsenator®, Digital Portable Arsenic Testing
The Arsenator® system is the lowest cost, most portable and accurate method
for determining Arsenic in safe limits (WHO guide-lines 10 ppb/µgl). Carefully
designed to be simple and safe to use either in the lab or in the field.
The complete system comes with sufficient reagents and consumables for over
400 tests.
• Low cost digital arsenic testing device
• Fully portable, designed specially for field use
• Immediate results in the field in less than 20 minutes
• Simple, safe and easy to operate
• Gives accurate test results between the critical range of 2µgl (ppb) to
100µgl (ppb)
• Designed in conjunction with Prof. Walter Kosmus and laboratory tested
by Imperial College London
• Field tested in conjunction with UNICEF / WHO WAT / SAN monitoring programmes
• Environmentally friendly
Specification
Range
2-100 µgl/ppb
Timing facility
up to 40 minutes
Resolution
0.001 AU
Power
PP3 9V Battery
Digital Arsenator Kit comprises the following components:
• Portable Digital Arsenator® System
• Tri-Filter Arsenic gas trap
• 5 x Arsenic collection filter holders (Black)
• 5 x Arsine gas removal filter holders (Red)
• 10 x Hydrogen Sulphide removal filters
• 420 x Reagent A1 (dry powder sachet)
• 420 x Tablet A2
• 420 x Arsenic collection filters
• 420 x Arsine gas removal filters
• Colour comparison chart (<10 to 500ppb)
• Dilution tube
• Spare battery
• Waste disposal bags
• Gloves and tweezers
• Rugged carry case with Instruction manual
Catalogue No
Description
EN15-502
Digital Arsenator. Supplied with Reagents and Consumables
for 420 tests
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Air / Dust
Sampling &
Monitoring
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Testing
Analysis
13
[email protected]
Telephone: +44 (0)1635 872 929
EN15-506
A mobile workstation consisting of 5 complete sets of Arsenic generators,
allowing for up to 5 tests to be conducted simultaneously. All of which is
supplied in a custom built carrying case that also provides a stable working
area. To be used in conjunction with the Arsenator®
Catalogue No
Description
EN15-506
Multi Pack Accessory kit for Arsenator®
Meteorology
A low cost, fully portable arsenic detection pack, which allows for the quantative,
visual analysis of arsenic in drinking water from less than 10 µg/l (ppb) up to 500
µg/l (ppb). The kit features a unique tri-filter arsenic trap which removes excess
arsine gas as well as any Hydrogen Sulphide which may also be given off as a
by-product of the reaction. Both reagents are added to the water
sample in the flask and the colour chart is then visually compared to get
a reading.
Toxic Gas
Detection
• Ideal for quick mass screening
• Low cost per test
• Simple and easy to operate
• Environmentally friendly
• Safe handling — no chemical liquids
• Housed in a robust custom built carry case
Visual Arsenic Detection Kit (VCDK) comprises the following components:
Description
EN15-510
Visual Detection Kit.
Air Quality
Monitoring
Catalogue No
EN15-510
Air / Dust
Sampling &
Monitoring
• 1x Unique tri-filter arsenic trap and a 125ml graduated flask
• 4x Arsenic collection filter holders (Black)
• 4x Arsine gas removal filter holders (Red)
• 4x Hydrogen sulphide filters
• Colour comparison chart (<10 to 500ppb)
• Gloves, tweezers and bags
• Sufficient tablets, reagents and filters to perform 200 tests
Soil /
Sediment
Testing
Analysis
Multi-Pack Accessory Kit for Arsenator®
Refill Pack
Description
EN15-504
Refill pack contains sufficient filter holders and tablets for 200 tests for
all Arsenator products
Please contact us for additional spares
& consumables for Water Test kits.
Laboratory
Analytical
Equipment
Note:
Noise &
Vibration
Monitoring
Catalogue No
Mobile
Laboratories
Training
Telephone: +44 (0)1635 872 929
[email protected]
14
Testing for
Heavy Metals
in Water
Contamination of our water resources by toxic
heavy metals is increasingly becoming a problem
the world over. Widespread industrial and urban
pollution is responsible for these heavy metals in
the environment.
The products in this section have been designed
specifically to allow easier, cost-effective
monitoring of the heavy metals most commonly
associated with health and environmental problems.
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Air / Dust
Sampling &
Monitoring
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Testing
Analysis
15
www.trace2o.com
The Metalyser Range has been designed specifically to allow easier, cost-effective monitoring of heavy metals most
commonly associated with public health and environmental problems.
Developed and manufactured solely in the UK, the Metalyser Range offers a breakthrough in terms of simple-to-use field
and laboratory instruments that offers high levels of accuracy at significantly lower cost to other alternatives such as
ICP-MS and Atomic Absorption.
Analysis of heavy metals in water has traditionally been difficult in the field. By combining the proven method of Anodic
Stripping Voltammetry (ASV) along with an innovative sonde design and a simple buffer delivery system, Trace2o has
developed instruments that can finally deliver reproducible results in the field as well as the laboratory. The design of the
Metalyser allows for the addition of future parameters, without the need to upgrade the instrument.
The Metalyser is available in 5 versions:
Metalyser HM1000 – Simple-to-use, rapid field analysis of 10 heavy metals in water.
Metalyser Deluxe HM2000 – Simple-to-use, rapid field analysis of heavy metals using both electrochemical and
photometric techniques.
Metalyser Field Pro HM3000 – Simple-to-use, rapid field analysis of heavy metals in water but incorporating a tablet
PC for detailed graphical analysis by more experienced users.
Metalyser HM4000 Heavy Metals Soils Analyser - for testing a range of heavy metals in soils – see page 79.
Metalyser Benchtop HM5000 - a laboratory based version which enables the electrochemist to develop his own
voltammetric methods using bespoke Metaware software for analysis.
[email protected]
Telephone: +44 (0)1635 872 929
Soil /
Sediment
Testing
Analysis
Metalyser HM1000
EN15-600
The HM1000 is an entry level heavy metals analyser aimed at the novice
field user. Results can be obtained quickly and easily for several of the most
common heavy metals onsite using the portable hand held unit. The instrument
and sensor head (sonde) is fully waterproof as well as the rugged carry
case enabling testing in all weathers and includes all the consumables and
accessories required to carry out 50 tests.
Meteorology
• Field based detection of heavy metals in water to low ppb concentrations providing data at site
• Rapid results allowing immediate action on remediation
• No complicated sample preparation or analysis procedures in the field allowing non-technical personnel the ability to obtain lab-comparable results
• Step-by-step pictorial guides allowing non-experienced personnel the ability to use instrument quickly and easily without reading in-depth manuals
• Low cost per test
• No PC required for sample analysis
• Rugged and durable instrumentation built for tough environments allowing operation even in adverse weather conditions
Measures the following 10 parameters
Data
Results obtained in 5 minutes
Internal memory: 1000 data sets with facility to enter sample number,
time and date
Transfer via USB to PC
New application methods can be uploaded to the unit via USB
User Interface
LCD full graphics backlit display: 128 x 128 pix
Joystick cursor control
Menu driven software
Power
Rechargeable battery providing in excess of 50 tests per charge
Alternative power supply via mains adaptor or vehicle cigarette lighter
Kit
Dimensions: 470mm (L) x 370mm (W) x 170mm (D) Net Weight: 9kg
Air Quality
Monitoring
Analytical principle: Anodic & Cathodic stripping voltammetry using disc
working electrodes.
Parameters measured: Arsenic (III), Total Arsenic, Cadmium, Chromium,
Copper, Lead, Manganese, Mercury, Nickel & Zinc
Operating Temperature: -20°C to +70°C
Air / Dust
Sampling &
Monitoring
Operation
Lower Limit
(ppb)
Upper Limit
(ppb)
WHO Guideline Value
(ppb)
5
500
<10
Total Arsenic
As (Total)
10
500
<10
Cadmium
Cd
3
500
<3
Chromium
Cr
50
500
<50
Copper
Cu
5
500
<2000
Lead
Pb
5
500
<10
Manganese
Mn
5
200
<100
Mercury
Hg
5
500
<6
*Nickel
Ni
50
500
<70
Zinc
Zn
5
500
<4000
Catalogue No
Description
EN15-600
HM1000 - Metalyser - Complete with Sonde assembly electrodes,
consumable kit and buffers and standards for 50 tests. Supplied in a
hard-shell carry case
Sonde
Training
Note:
For Metalyser consumables - see page 18
Telephone: +44 (0)1635 872 929
Mobile
Laboratories
As (III)
Laboratory
Analytical
Equipment
Arsenic (III)
Noise &
Vibration
Monitoring
Limits of Detection (Fresh Water)
Parameter
Toxic Gas
Detection
Metalyser
Specification
[email protected]
16
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Air/ Dust
Sampling &
Monitoring
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Testing
Analysis
17
EN15-620
Metalyser Deluxe HM2000
Portable field kit combining electrochemical and photometric techniques for
analysing a wider range of metals in water
• Rapid in-field analysis
• Suitable for remediation studies
• Voltammetric and photometric techniques
• Precise results from ppb to ppm levels
• Intuitive user interface
• Rugged, waterproof kit
• Consumables for 50 tests included
Measures the following parameters
Catalogue No
Description
EN15-620
HM2000 – Deluxe Metalyser - Complete with Sonde assembly,
electrodes, consumable kit, buffers and standards for 50 tests and
photometer. Supplied in a hard-shell carry case
Metalyser Field Pro HM3000
The Field Pro is an advanced portable analyser with an integrated ruggedised
tablet PC and bespoke Metaware software to enable detailed graphical analysis
by more experienced users.
The Field Pro is housed in a fully waterproof case, and with the water-resistant
tough PC and waterproof instrument, testing can continue in the most adverse
of conditions. The integrated tablet PC provides instant graphical data, via the
dedicated pre-loaded Metaware software. The user can now take traditional
laboratory analysis tools such as repeat scanning and multi-point standard
additions to the field, greatly increasing confidence in the results as well as
providing much more information about the sample matrix and potential
interferences.
With the manual peak height calculation function, peaks can be measured that
automatic techniques cannot detect. The spreadsheet function can average
data, calculate correlation coefficients, draw best fit lines and calculate the
original sample concentration. With these tools the field user can detect levels
as low as 1ppb with confidence.
• Field based detection of heavy metals to low ppb concentrations using the popular Metalyser instrument but with a tablet PC offering advanced levels of analysis
• Rapid results allowing immediate remedial action to be taken
• Integrated tablet PC incorporating Metaware software, displays and stores all of the graphical data, allowing the more advanced user to undertake enhanced analysis at site
• Data manipulation using the tablet PC allows for extended detection limits and high levels of accuracy
• Rugged and durable PC and instrumentation built for a tough environment which enable operation even in adverse weather conditions
Catalogue No
Description
EN15-640
HM3000 - Metalyser Field Pro- Complete with integral tablet PC,
Sonde assembly, electrodes, consumable kit and buffers and standards
for 50 tests. Supplied in 2 hard-shell carry cases.
[email protected]
Telephone: +44 (0)1635 872 929
A compact benchtop laboratory based voltammetry instrument for use by
scientists and technicians engaged in education, research, and industry.
Laboratory-based analysis of heavy metals has traditionally been complex and
expensive, requiring dedicated installations and experienced operators. With
no costly installation expenses and an easy-to-use interface, the HM5000 is
the instrument of choice for novice to advanced users, offering a realistic and
economic alternative to AAS and ICP-MS.
The instrument has been designed with several features to overcome the
traditional challenges found in voltammetric analysis. The innovative nitrogen
sample purge diminishes interference from oxygen, whilst the automatic
elevation platform reduces sample disturbance, improving repeatability.
Our bespoke Metaware software offers the experienced analyst full control over
electrochemical methods. The software allows the user to change time and
voltage variables, as well as offering a range of stripping techniques, i.e. square
wave, differential pulse, linear sweep and cyclic voltammetry.
Peak height, base line subtraction, standard addition, calibration curve,
linear regression / spreadsheet calculation
User Interface
Power
Full PC control via USB and Bluetooth
Metaware benchtop graphical control software
12-15V DC (Optional battery back-up)
Weight / Dims
3.5Kg, 200 x 370 x 210mm
Measuring Range
ppm to <1ppb levels. Dependent on sample type, preparation and
operating settings
Fresh water, sea water, river water, waste water, sewer water, portable
water, factory effluent, food, beverages, textiles, plastics, biological
and other measurable samples. Sample types may require digestion,
extraction, dilution and/or pre-treatment
Sample Types
The following method files are pre-loaded in the software
HM5000 - Metalyser Benchtop - Instrument supplied complete with
power supply, PC Software, USB Cable, sample cups and pre-loaded
method files. (PC, buffers, standards and conditioning solutions ordered
separately)
Consumables for all Metalysers
Catalogue No
Description
200 tests
EN15-602
M1, M4, & M5, Buffer and Standards Pack (Cd, Pb, Cu, Zn)
EN15-603
EN15-604
M2, Buffer and Standards Pack (Hg)
EN15-605
EN15-606
M3, Buffer and Standards Pack (As)
EN15-607
EN15-608
M6, Buffer and Standards Pack (Mn)
EN15-609
EN15-610
M7, Buffer and Standards Pack (Cr)
EN15-611
EN15-612
M8, Buffer and Standards Pack (Ni)
Telephone: +44 (0)1635 872 929
Training
50 tests
EN15-601
Mobile
Laboratories
Description
EN15-660
Laboratory
Analytical
Equipment
Catalogue No
Noise &
Vibration
Monitoring
Data Evaluation
Air Quality
Monitoring
Analytical principle: Anodic & Cathodic stripping voltammetry using disc
working electrodes
Measuring techniques: Square wave, different pulse, linear sweep, cyclic
voltammetry
Operating Temperature: 0 to +70°C
Air / Dust
Sampling &
Monitoring
Operation
Toxic Gas
Detection
Specification
Meteorology
• Laboratory based analysis of heavy metals in solution from ppm to low ppb levels
• Complete control over voltammetric parameters allowing advanced users to customise their analysis and the ability to develop their own methods
• Minimal set-up costs with no expensive gas lines, extraction or temperature-
controlled environment needed, unlike AAS or ICP-MS
• Starter kit of method files included for easy analysis by users of any ability
• Method file compatibility with HM1000 means user developed parameters can be adapted for in-field use
• Increased ability to handle differing sample matrices
• Bluetooth connectivity also enables the user to remotely control the instrument away from possible spills and hazardous chemicals.
Soil /
Sediment
Testing
Analysis
Metalyser Benchtop HM5000
[email protected]
18
ENVIROKIT
Environmental Health Inspectors Kit
EN15-690
This kit has been especially designed with the Environmental Health Inspector in
mind and it includes a range of instruments which will help him quickly to carry
out on-the-spot tests and also, where necessary, to take samples away to the lab
for later analysis.
The ENVIROKIT contains the following components:
(for details of each instrument please refer to the product numbers shown)
Water Quality
• Pocket pH meter. Page 37 (EN16-102)
• Pocket Conductivity meter. Page 40 (EN16-129)
• Turbidity Tubes, 2 part. Page 8 (EN15-206)
• Water Level Dipmeter. Page 62 (EN26-136)
• Tube Water Sampler (capacity 250ml). Page 65 (EN26-160)
• Water Sample Bottles (5)
• Re-sealable polythene bags, pack of 25
EN16-102
Air / Dust
Sampling &
Monitoring
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Testing
Analysis
Noise
• Mini Digital Sound Level Meter, a simple meter for monitoring noise levels within a neighbourhood. Page 122 (EN81-102)
Air Quality
Monitoring
Radiation
• Portable Radon Monitor, for measuring levels of this naturally occurring but dangerous gas in the home, office and factory. Page 120 (EN73-506)
EN73-506
Catalogue No
Description
EN15-690
Environmental Health Inspectors Kit
Supplied complete packed into a rugged backpack for easy
transport in the field.
EN81-102
EN44-292
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
EN16-129
Indoor Air Quality
• Multi-Function Environment Meter measures indoor Sound Levels, Light
Levels, relative Humidity and Temperature. Page 98 (EN44-292)
• General Dust Sampling & Monitoring Kit. Page 107 (EN65-210 & EN65-212)
• Portable Ambient Carbon Monoxide Monitor, measures the concentration of this harmful gas produced by faulty heating and cooking appliances. Page 102 (EN55-260)
• Gas Leak Detector, for rapid checks on gas pipe connections. Page 102 (EN55-262)
19
[email protected]
Telephone: +44 (0)1635 872 929
EN15-700
Biological Oxygen Demand is the amount of oxygen used by micro-organisms
when they bio-degrade organic material in a water sample. It is used as an
important measure of the degree of contamination in a supply.
This allows exact and error free readings of the BOD value to be read directly in
mg/L or to be calculated by single multiplication.
The system is supplied complete with 6 of the following: dark glass 500ml bottles,
PVC caps, capillary caps, KOH containers, interchangeable scales, mercury
(2ml bottles), 35 mm magnetic stirrer bars and an operation manual.
Description
EN15-700
Standard 6 bottle BOD System
EN15-702
Standard 6 bottle Spares Kit
Laboratory
Analytical
Equipment
Catalogue No
Noise &
Vibration
Monitoring
• Simple handling
• Direct reading of BOD in mg/L
• Maintenance free, integral
• Programmable stirrer
Air Quality
Monitoring
The conventional BOD system comprises 6 bottles and 6 mercury capillary tubes
with a constant scale of up to 1000mg/L.
Air / Dust
Sampling &
Monitoring
Standard BOD System
Toxic Gas
Detection
Biological Oxygen Demand (BOD)
Meteorology
Laboratory tests to determine waste
water quality indicators are used to
assess the suitability of waste water
for disposal or re-use. Tests measure
physical, chemical, and biological
characteristics of the waste water and
this section includes some of the key
specialist equipment required.
Soil /
Sediment
Testing
Analysis
Waste Water
Testing &
Toxicity
Mobile
Laboratories
Training
Telephone: +44 (0)1635 872 929
[email protected]
20
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Testing
Analysis
BOD Merc-Free Analysis Sensor
Innovative electronic pressure measuring system for BOD determinations
using manometric technique.
• Micro-processor controlled
• Mercury Free
• Ergonomic sensor design for simple use, reading and data retrieval
• Inductive stirring mechanism
How the Merc-Free system works…
The Merc-Free instrument is pushed over the BOD bottle having first placed
two NaOH tablets into the special bung. The reaction of the tablets with the air
vapour causes an increase in pressure which is measured by the instrument
and converted into mg/l on the display.
Merc-Free Sensor System 6 and 10
EN15-710
BOD Sensor System 6, a complete package for 6 tests, consisting of a
6-position stirring station with BOD Sensors, dark glass bottles, alkali holders
and stirring bars.
BOD Sensor System 6 (wireless), a complete package for 6 tests as above but
includes a wireless system for instant PC download of the BOD values.
BOD Sensor System 10, a complete package for 10 tests, consisting of a
10-position stirring station with BOD Sensors, dark glass bottles, alkali holders
and stirring bars.
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Air / Dust
Sampling &
Monitoring
Specification
Measurement Principle
Laboratory
Analytical
Equipment
Wireless Sensor System
Electronic pressure probe
Electronic protection
IP54
Display
digits 3 LED
Power Supply
2 x lithium batteries
Safety class
3IEC 1010
Bottle capacity
500ml
Power
115v or 230vAC, 50-60Hz
Weight, kg
2.3
Dimensions (cm) (W x H x D)
35 x 30 x 15
27 x 19 x 30
Performance
Memorised Data
5 BOD values at 24hr intervals
Reading value
BOD Values
Every 30mins / 2 / 4 / 6 / 8 / 12
/ 24hrs
Every 2 / 4 / 6 / 8 / 12 / 24hrs for
longer analysis
mg/I(ppm) directly on the display
Directly on the display at anytime
also after the standard 5 days
period
BOD last determination
Automatically transferred to wireless databox and displayed by
software
Possible
Catalogue No
Description
EN15-706
BOD Sensor System 6 (Standard)
EN15-708
BOD Sensor System 10 (Standard)
EN15-710
BOD Sensor System 6 (Wireless) includes wireless databox, software &
cable
EN15-712
BOD Control Tablets (pkt of 8)
Training
Mobile
Laboratories
Standard Sensor System
21
[email protected]
Telephone: +44 (0)1635 872 929
EN15-724
Two sizes of BOD incubators are available for 1 or 2 BOD systems. All models
are suitable for use with the standard or Merc-Free systems. Air circulation
within the incubators ensures an even temperature throughout
Controllable
90L Incubator
with RS232
Controllable
90L
Incubator
with RS232
Controllable
220L
incubator
with RS232
Controllable
220L
Incubator
with RS232
20˚C
±0.5
3 to 50˚C
3 to 50˚C
3 to 50˚C
3 to 50˚C
Temperature
Homogeneity
±0.5˚C (air)
±0.5˚C
(air)
±0.5˚C
(air)
±0.5˚C
(air)
Stability
±0.5˚C (air)
±0.5˚C
(air)
±0.5˚C
(air)
±0.5˚C
(air)
0.1˚C
0.1˚C
0.1˚C
0.1˚C
220-240v,
50-60Hz
220-240v,
50-60Hz
220-240v,
50-60Hz
220-240v,
50-60Hz
Temperature
Settings
Temperature
Resolution
Power Supply
220-240v,
50-60Hz
Meteorology
Dedicated
90L BOD
Incubator
Glass Door
Dedicated 90L BOD Incubator
EN15-720
Controllable 90L Incubator with RS232
EN15-722
Controllable 90L Incubator with RS232 & glass door
EN15-724
Controllable 220L Incubator with RS232
EN15-726
Controllable 220L Incubator with RS232 & glass door
Please refer to our General Lab Catalogue for a
wide range of glassware and other equipment
required for Water Quality Analysis.
Noise &
Vibration
Monitoring
Note:
Air Quality
Monitoring
Description
EN15-718
EN15-722
Air / Dust
Sampling &
Monitoring
Catalogue No
Toxic Gas
Detection
90 Litre BOD Incubators
The three small dimension refrigerating incubators have been built purposely
for the incubation of manometric BOD measurement units; allowing 1, 6 or 10
bottle system to be incubated.
220 Litre BOD Incubators
The two complete and advanced incubators are intended for any use which
requires precise and constant temperature. The continuous internal air
circulation and the thermostating microprocessor controlled Auto-Tuning
system allows a uniform temperature within the internal chamber.
Soil /
Sediment
Testing
Analysis
BOD Incubators
Laboratory
Analytical
Equipment
Mobile
Laboratories
Training
Telephone: +44 (0)1635 872 929
[email protected]
22
COD System
Chemical Oxygen Demand (COD) is a vital test for assessing the quality of
water. The COD predicts the oxygen requirement of the water and is used for
the monitoring and control of discharges and for assessing treatment plant
performance.
The COD System offers a method which is both practical and convenient. The
reagents are supplied pre-mixed and pre-dispensed into borosillicate glass
test tubes. The test is simply carried out by adding 2ml of sample to the tube,
closing the cap and then digesting for two hours at 150°C. The tubes are then
cooled and the sample is measured using a photometer.
• Carries out tests quickly and effectively
• Offered in four ranges from 5mg/L to 20,000mg/L
• Allows 24 tubes to be digested at the same time
• Reagents comply and meet international standard methods and requirements
Supplied complete with:
• COD Dry-block heater
• Safety screen
• Test tube rack
• Portable Photometer
• Adaptor
• Thermometer
• Micropipettor
An optional rugged carrying case is available should the system need to be
taken to remote areas.
Catalogue No
Description
EN15-728
COD System 220 / 240V 50-Hz
EN15-730
COD System 110 / 120V 50-Hz
EN15-732
Rugged carrying case
Catalogue No
COD Tube Reagent Tests (24 pack)
EN15-734
5-150mg/L range
EN15-736
20-400mg/L range
EN15-738
50-2000mg/L range
EN15-740
500-20,000mg/L range
EN15-728
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Air / Dust
Sampling &
Monitoring
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Testing
Analysis
23
[email protected]
Telephone: +44 (0)1635 872 929
The Kjeldahl method is named after the Danish chemist who
developed it more than a century ago. Today, the method is widely
used according to official methods to determine nitrogen and
proteins in food, feed, soil, waste water etc.
The equipment in this section enables the Kjeldahl method to be
performed easily and with reproducible results in order to determine
the Total Kjeldahl Nitrogen (TKN) content in waste water samples.
Digestion Units
EN15-750
Meteorology
Toxic Gas
Detection
These are widely used instruments within laboratories performing analysis for
different applications such as digestions in the Kjeldahl process for protein
determination and analysis in the environmental field.
A user-friendly program menu allows for the selection of up to 20 work
programs, while 4 temperature ramps are available for the simultaneous
digestion of 6, or 20 samples in test tubes of different dimensions.
These instruments are provided with a wide range of options (temperature
selections, programmable permanence time, continuous working mode
availability etc) and with a visualisation display which allows for the desired
values to be set and to monitor the digestion progress.
Number of samples
EN15-750
EN15-752
6 in 250ml tubes with 42mm Ø
20 in 250ml tubes with 42mm Ø
Temperature range, °C
EN15-752
From room temperature to 450
Epoxy painted stainless steel structure
Selectable programs
20 with 4 ramps for each programs
Selectable durations
from 1 to 999 minutes
Power supply
230V / 50-60Hz
1100
Weight, kg
10
24
293 x 152 x 339
393 x 152 x 446
Suction cap
EN15-758
EN15-764
Support system
EN15-760
EN15-766
Glassware handle with heat
shields
EN15-756
EN15-762
Dimensions (WxHxD), mm
2300
Operating Accessories
Laboratory
Analytical
Equipment
Test tubes, Ø 42x300mm,
250ml, 3 pcs / box, for use
with both units
Noise &
Vibration
Monitoring
Power, W
Air Quality
Monitoring
Construction material
Air / Dust
Sampling &
Monitoring
• High accuracy - temperature precision is ±0.5%, with a heating speed of 20 to 420°C in 30 minutes
• RS232 interface - for PC data transfer and storage according to GLP
• Safety - Electronic microprocessor checks and automatically calibrates the heating block’s temperature
• Customisable - the operator can choose among 6 different languages
Catalogue No
Soil /
Sediment
Testing
Analysis
KJeldahl-Determination Of
Total Kjeldahl Nitrogen (TKN)
EN15-754
EN15-750
Mobile
Laboratories
EN15-768
EN15-770
Training
Telephone: +44 (0)1635 872 929
[email protected]
24
EN15-768
Recirculating Water Pump for Fumes Aspiration
Recirculating water pump that lets two different timed modes for the digesters
to be selected. This ensures optimum aspiration depending on the digestion
phases and the number of samples in the digester connected to the pump.
Lack of adequate water mains pressure or its high consumption frequently
prevent common water pumps from being used. This unit consists of a tank
where the water introduced is recirculated continuously, offering considerable
savings on water. The type and quality of the materials used make the
instrument extremely quiet and long-lasting, and guarantee a high flow rate
(up to 35 l/min). Combined with the scrubber unit, it provides the ideal
complement to achieve highly effective fume neutralization that is developed
during acid digestions.
The unit is supplied complete with a Viton tube, 10 x 14mm diameter
• Automatism and optimization of the sucking power
• Strongly reduced water consumption in comparison to water jet pumps
connected to tap
• Possibility of avoiding emission into the atmosphere of gaseous pollutants or polluted waters into drainages
• Independent from tap water contingencies like low water availability or
low pressure
Meteorology
Soil /
Sediment
Testing
Analysis
EN15-770
Air / Dust
Sampling &
Monitoring
Toxic Gas
Detection
Specification
Air Quality
Monitoring
Training
35
Flow regulation, l/min:
from 0 to 35
Residual pressure with water temp. of 15°C:
35 mmhg
Power:
160 W
Power supply:
230 V / 50 Hz
Weight, kg:
8.4
Dimensions (wxhxd), mm:
250 x 400 x 370
Catalogue No
Description
EN15-768
Recirculating water pump for Flumes Aspiration
Scrubber
A scrubber, that when connected to the Recirculating Water Pump, is
designed to neutralise corrosive and toxic fumes that develop during oxidative
mineralizations or other processes. The system is supplied in the configuration
consisting of two stages; condensation, and neutralisation.
The instrument can be supplied with a third (optional) stage, generally used with
samples that generate high amounts of fumes during digestion (e.g. soybean).
The unit has a broad range of applications, from the Kjeldahl method to
neutralisation with acids and bases. Thanks to the elevated surface of contact
between gas and liquid, the unit provides effective cleaning of the fumes,
preventing their hazardous emission into the laboratory and the
environment.
Noise &
Vibration
Monitoring
Laboratory
Analytical
Equipment
Mobile
Laboratories
25
Air flow max, l/min:
EN15-750
• A highly efficient neutralization, due to the optimized gas-liquid contact
• Safe and practical to use
• Simple disposal of condensates
• Simple control and replacement of neutralizing solution
EN15-768
Specification
EN15-770
Construction material:
Epoxy painted stainless steel structure
Weight, kg:
3.5
Dimensions (WxHxD), mm:
300 x 500 x 190
Catalogue No
Description
EN15-770
Scrubber
EN15-772
Filter for activated carbon
EN15-774
Refill activated carbon pack of 10
[email protected]
Telephone: +44 (0)1635 872 929
EN15-776
Distillation units that are designed for diversified and flexible use, including
applications such as determining ammoniacal nitrogen, protein nitrogen,
(Kjeldahl or direct alkaline distillation), nitric nitrogen (after reduction), phenols,
volatile fatty acids, cyanides, alcohol content, etc, according to official
procedures.
The units come with a patented steam generator that assures distillations are
carried out in absolute safety and without routine maintenance. The supply
water feed is automatically stopped during pauses, thus cutting down on its
consumption. The instrument is equipped with a system that recognises when
the sliding protection door is not closed and when the test tube is not in
position, without which the dosing pump does not start operation. Use of
an innovative system allows various sizes of test tubes to be used and 500
ml Kjeldahl flasks to be housed. Both units work in accordance with official
methods AOAC, EPA, DIN e ISO, with model EN15-776 representing the basic
unit, and model EN15-778 the more advanced, semi-automatic unit.
EN15-778
Catalogue No
EN15-776
Analysis time of 100ml of distillate:
5 minutes
4 minutes
0 to 99 minutes
0 to 30 minutes
Time related to start for Devada alloy analysis:
Steam generator:
EN15-778
Toxic Gas
Detection
• A maintenance-free steam generator that uses deionised water
• Innovative titanium condenser that achieves outstanding heat exchange and higher resistance than glass, and that is also easy to clean
• Technopolymer splash head (alkali-resistant) that ensures a longer lifetime
Meteorology
Supplied complete with 42mm Dia x 300mm - 250ml test tube, flask, tongs and
inlet tube.
Soil /
Sediment
Testing
Analysis
Distillation Units
Deionised / Distilled water
Manual
Automatic
Reproducibility (RSD):
<1%
Recovery:
> 99.5 % at nitrogen levels 1 - 200 mgN
Detection limit:
> 0.1 mgN
Sodium hydroxide addition:
Automatic
Manual
Automatic
Boric acid addition:
Manual
Sodium hydroxide addition:
Automatic
Dilution water volume:
-
0 to 200 ml
Boric acid volume:
-
0 to 100 ml
-
0 to 100 %
Steam flow regulation:
0.5 l/min at 15°C - 1 l/min at 30°C
Weight, kg:
Dimensions, mm:
25
26
385 x 780 x 416
385 x 780 x 416
Power:
240V AC 50HZ
Description
EN15-754
Test tubes, Ø 42 x 300mm, 250ml, 3 pcs / box
EN15-782
Test tubes, Ø 26 x 300mm, 100ml, 6 pcs / box
EN15-784
Test tube, Ø 48 x 260mm, 300ml
EN15-786
Spacer for test tube Ø 48 x 260mm
EN15-788
Test tube, Ø 80 x 300mm for alcohol determination
EN15-790
Test tube connection Ø 26mm, Ø 48mm, 500ml balloon
Mobile
Laboratories
Catalogue No
Laboratory
Analytical
Equipment
Accessories
Noise &
Vibration
Monitoring
Tap water consumption:
Air Quality
Monitoring
Dilution water addition:
Air / Dust
Sampling &
Monitoring
Distillation residual removal:
Training
Telephone: +44 (0)1635 872 929
[email protected]
26
Flocculators
Jar Test
The type of chemical coagulant to be adopted
for removing suspended solids from wastewater
and the dosage required are established based
on laboratory results obtained from the so
called Jar Test.
EN15-800
Toxic Gas
Detection
Specification
Air / Dust
Sampling &
Monitoring
Air Quality
Monitoring
Noise &
Vibration
Monitoring
Laboratory
Analytical
Equipment
Training
Mobile
Laboratories
27
Portable Flocculators
The Portable Flocculator was developed for optimum use in the field. It runs
on 100-240V mains power supply or using 12 DC by connecting it to a normal
battery or a car cigarette lighter. The Flocculator 4-position features a non-slip
base that ensures the stability of the beakers during operation. It is particularly
suitable for carrying out Jar Tests for optimizing the dosing of coagulants and
polyelectrolyte in the proximity of water treatment plants.
Meteorology
Soil /
Sediment
Testing
Analysis
EN15-808
Number of stirring rods
4
Construction material
Epoxy painted metal structure
Speed selector
Multi-selector (settable speed for each rod)
Speed settings
5 speeds: 20, 40, 50, 100, 200rpm)
Speed resolution
±2rpm
Display
Analogue
Power
6W
Power supply
100-240V / 50-60Hz
Weight, kg
4.8
Dimension (WxHxD)
mm
250 x 320 x 250
Catalogue No
Description
EN15-800
Portable Flocculator
EN15-802
Carrying Case
EN15-804
Glass Beaker 1000ml
EN15-806
Plastic Beaker 1000ml
Flocculators
For flocculation (jar) tests on water and effluent samples. It is specially designed
for repeatable conditions between samples and from run to run. A digital display
clearly indicates the speed of the rotational stainless steel paddles, which can
be varied from 10 to 300rpm. The digital timer can be set to count down from 1
to 99 minutes or 1 to 99 hours.
• Accepts six samples
• Digital indication of speed and time
• Two pre-set programs
• Built in illumination for easy viewing of samples
Specification
4 Place System
6 Place System
645 x 347 x 260
935 x 347 x 260
Weight, kg
13
17
Power, W
11
19
Dimensions, mm
Catalogue No
Description
EN15-808
4 position Flocculator set speed digital display
EN15-810
6 position Flocculator se speed digital display
EN15-804
Glass Beaker 1000ml
EN15-806
Plastic Beaker 1000ml
[email protected]
Telephone: +44 (0)1635 872 929
EN15-830
• Transparent cone, made from tough styrene acrylonitrile
• With moulded graduations. Lower part is graduated to 2ml x 0.1,
10ml x 0.5, 40ml x 1, 100ml x 2 and 1000ml x 50
Catalogue No
Description
EN15-830
Imhoff sedimentation cone, plastic, 1000ml
Imhoff Sedimentation Cone, Glass
• For determining the amount of sediment in sewage or industrial waste
• Graduated up to 40ml and with capacity mark at 1000ml
• Manufactured from borosilicate glass
Description
EN15-832
Imhoff sedimentation cone, glass, 1000ml
Imhoff Cone Stands
EN15-832
EN15-836
• Acrylic stands for mounting Imhoff Cones
• All stands have a locating recess in the base
Description
EN15-834
Cylindrical stand for 1 cone
EN15-836
Rectangular stand for 2 cones
EN15-838
Rectangular stand for 3 cones
Toxic Gas
Detection
Catalogue No
Meteorology
Catalogue No
Soil /
Sediment
Testing
Analysis
Imhoff Sedimentation Cone, Plastic
Air / Dust
Sampling &
Monitoring
Sewage Effluent Test Kit
Sewage Eflluents are used in many countries for irrigation, and this kit provides
a simple means of checking the quality of such water.
Sewage Effluent Test kit
EN15-842
Reagents for permanganate value and pH (50 tests)
Mobile
Laboratories
Description
EN15-840
Laboratory
Analytical
Equipment
Catalogue No
EN15-840
Noise &
Vibration
Monitoring
•Permanganate Value - enables the Permanganate Value (PV) to be
determined and the effluent classified as to its acceptability for discharge.
•pH test - Chemical and biological reactions at sewage works are profoundly influenced by pH. A pH test will also check, for example, on the effect of acid or alkaline trade wastes in the effluent flow.
•Turbidity and Suspended Solids - Designed to give a measure of the
suspended solids content of the final effluent. It is also useful in following the day-to-day variation in the quality of sewage and effluent.
•Probable BOD, COD and TOC - It is possible to derive an indication of the Biochemical Oxygen Demand (BOD), Chemical Oxygen Demand (COD) and Total Organic Carbon (TOC) from the result of the Permanganate Value test.
•Temperature - A check should be maintained on the temperature
of effluent discharges and these should always be close to ambient temperatures.
•Kit comes complete with a -10° to +50° thermometer in a brass protecting case.
Air Quality
Monitoring
It is used extensively for control testing at small sewage works. Based on
simplified methods of sewage effluent testing, the kit contains tests for the
essential quality control checks required for the day-to-day operation of sewage
effluent treatment plants. Each of the tests is performed simply without the use
of complicated equipment and are suitable without formal training in water
testing and analysis.
Training
Telephone: +44 (0)1635 872 929
[email protected]
28
Acid Mining Test Kit
This chemical test kit has been formulated for the acid mining industry to
measure discharge water which can be both acidic and alkaline, depending on
the metal type.
The discharge water can also contain metals such as iron. Since the run-off
water will eventually find its way to lakes and rivers, it is important to test it to
make sure it does not pollute the environment and water reservoirs.
The Acid Mining Test Kit includes all the necessary tests for alkalinity, acidity,
pH and iron. The reagent bottles are in easy-to-recognise ascending numbers,
and allow your tests to be more expedient and less time consuming.
The testing procedures are clearly shown in the step-by-step instruction
manual so that anyone can carry out the analysis. pH measurements are made
using a pocket electronic pH tester, for faster and more accurate results than
conventional litmus paper.
Catalogue No
Description
EN15-850
Acid Mining Test Kit (approx 100 tests)
Cyanide Test Kit
Cyanide is a pollutant that originates mostly from metallurgic, galvanic and
other industrial processes, such as gold and silver extraction. Because it is
poisonous to the human nervous system, it is imperative to monitor and control
cyanide levels in portable water. When in contact with acids, cyanide is freed as
a poisonous gas.
The Environmental Protection Agency (EPA) has established that the maximum
level of cyanide in water is not to exceed 0.2 mg/L (ppm).
Specification
Method
Checker Disc
Range
0.00-0.30 mg/L
Smallest Increment
0.01 mg/L
Chemical Method
Pyride-pyrazolone
Number of Tests
100
Weight, g
580
Catalogue No
Description
EN15-852
Cyanide Test Kit with sufficient reagents for 100 tests
EN15-854
Cyanide Test Kit refill pack for 100 tests
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Air / Dust
Sampling &
Monitoring
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Testing
Analysis
29
[email protected]
Telephone: +44 (0)1635 872 929
EN15-856
Cyanide is a pollutant that originates mostly from metallurgical and galvanic
industrial plants and is extremely poisonous to the human nervous system. It is
therefore imperative to monitor and control its level in potable water.
Continuous monitoring in waste effluents is required, and cyanide is removed
using alkaline chlorination procedures.
European standards limit the concentration of cyanide in drinking water to 0.05
mg/L, while the USEPA has established that the maximum level is not to exceed
0.2 mg/L.
This instrument is an ideal replacement to test kits, and will provide fast and
accurate measurements at the touch of a button. Reagents are supplied in
individual sachets containing fast dissolve powder for ease of use.
Specification
0.000 to 0.200 mg/L
Resolution
0.001 mg/L
Accuracy
±0.005 mg/L ±3% of reading
Light Source
LED 585 nm
Light Life
Life of the instrument
Light Detection
Silicon Photocell
Battery Type / Life
1 x 9V / approx. 40 hours of continuous use;
auto-off after 10 minutes of non use
Meteorology
Range
Soil /
Sediment
Testing
Analysis
Cyanide Meter
Toxic Gas
Detection
180 x 83 x 46
Weight, g
290
Method
Adaptation of the Standard Methods for the
Examination of Water and Wastewater, 18th ed.
The reation between cyanide and reagents causes a blue tint in the
sample
Catalogue No
Description
EN15-856
Cyanide Meter supplied complete with cuvettes, battery and instructions
but excluding reagents
EN15-858
Cyanide reagents pack for use with Cyanide Meter. Pack of 100
EN15-859
Cyanide reagents pack for use with Cyanide Meter. Pack of 300
Air Quality
Monitoring
0 to 50°C; RH max 95% non-condensing
Air / Dust
Sampling &
Monitoring
Environment
Dimensions, mm
Noise &
Vibration
Monitoring
Laboratory
Analytical
Equipment
Unable to find the
equipment you need?
Mobile
Laboratories
Please contact our in-house
experts for advice
Training
Telephone: +44 (0)1635 872 929
[email protected]
30
Air / Dust
Sampling &
Monitoring
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Testing
Analysis
Toxicity
EN15-860
Eclox - Water Purity Testing Kit
Developed from a kit in use by the armed forces throughout the world. This
Eclox test kit is now available for water and sanitation engineers to give a rapid
indication of the toxicity levels present at the water source. The heart of the Eclox is
a luminometer which gives a generic identification of the toxicity of a water sample.
Applications:
• The kit can provide a rapid indication of water quality (4 minutes).
• On-site detection of contamination.
• Pollution incident tracking.
• Emergency Pollution Response Kit.
• World wide field water evaluation.
• Chemicals from urine, faeces, phenols, amines, heavy metals, cyanide and many other toxic substances are all rapidly detected.
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Features:
31
• Rapid detection of contaminated water.
• Reliable indicator of relative water quality.
• Sensitive to heavy metals and poisons.
• Easy to use with minimum of training.
• Robust, washable and totally portable.
• Completely self contained.
• Use in a wide range of environmental conditions.
Specification
Data Logging
Up to 60 tests recorded in full detail
Consumables Shelf Life
2yrs at ambient temperature
Battery Life
Greater than 250 tests
Batteries
4 X AA
Temperature
-20˚C to +55˚C
Weight, Kg
6.5 fully loaded
Dimensions, mm
489 X 400 X 200
Catalogue No
EN15-862
Description
Eclox Toxicity Kit Supplied with luminometer, micropipettes, tips,
sampling bottles, set of 7 chemiluminescence reagents and pesticide
strips.
Set of 7 chemiluminescence reagents.
EN15-864
Pack of 25 pesticide strips.
EN15-860
[email protected]
Telephone: +44 (0)1635 872 929
Soil /
Sediment
Testing
Analysis
Oil In Water
EN15-868
• Measurement range from below 1ppm to over 1,000ppm without dilution
• Unaffected by suspended solids
• Performance independent of process temperature
• Precision sample volume not required
• No acid required
Noise &
Vibration
Monitoring
• No solvents required
• Simple procedure
• Complete analysis in less than 10 minutes
• Measures WSO’s at pH < 2
• Accurate and highly repeatable
• UV fluorescence technology
• Disposable cuvettes
• Measurements per battery change: >1,000
• Meets IP67, dust-proof, waterproof, non-metallic case
Mobile
Laboratories
• Powered by 4 AAA batteries
Description
EN15-868
Hand Held Oil in Water Monitor
Laboratory
Analytical
Equipment
• Correlates to standard laboratory gravimetric and IR methods
Catalogue No
Air Quality
Monitoring
• Measures dispersed (free) oil independent of WSO (Water Soluble Organics)
Air / Dust
Sampling &
Monitoring
Features:
Measures all oils including the heaviest of crudes to condensates up to 50° API
and refined diesel range oil, lube oils, and heavy fuel oils in water
Toxic Gas
Detection
This light, easy to use, accurate and low cost instrument is used for measuring
crude oil and condensates in produced water, de-salter tail water, tank bottoms,
cargo heaters, or anywhere that crude oil comes in contact with water.
This monitor has been developed to a method that measures oil-in-water and
uses no solvent. The advantages are significant in that we have eliminated
the health and safety hazards of transporting, handling and disposing of
solvents commonly used in the field for oil-in-water analysis. Along with
safety, the method eliminates operator error associated with precision
liquid measurements during the analysis process. It is a robust method with
unprecedented accuracy and repeatability.
Meteorology
Hand Held Oil in Water Monitor
Training
Telephone: +44 (0)1635 872 929
[email protected]
32
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Testing
Analysis
EN15-870
Oil Content Monitor
The Oil Content Monitor is an automated portable unit for monitoring oil
content in both fresh water and saltwater. The one-touch monitoring process
is fully automated, from sample extraction to analysis and sample expulsion.
The unit utilizes an extraction solvent to ensure superior oil particle stability and
infrared absorptiometry for sample analysis. Using 0mg/l -200mg/l dynamic
ranging, the unit is capable of analyzing both high and low concentrations.
A sperate dedicated solvent reclaimer can be purchased and will filter out
extraction solvent. This uses no electricity and greatly reduces test costs.
Specification
Measurement principle
Solvent extraction, NDIR analysis (Infrared spectroscopy)
Measurement range
0mg/l ~ 200mg/l dynamic ranging
Resolution
Air/ Dust
Sampling &
Monitoring
Air Quality
Monitoring
100 to 200 mg/L; 1 mg/L
0 to 9.9 mg/L; ± 0.2 mg/L ± 1 digit
Repeatability
10.0 to 99.9 mg/L; ± 2 mg/L ± 1 digit
100 to 200 mg/L; ± 4 mg/L ± 1 digit
Measurement
Manually controlled
Calibration
One touch calibration after the calibration standard is introduced to
the instrument
Extraction Solvent
S-316 solvent
Sample / Solvent Volume
20 mL, ratio of sample to solvent is 2:1
Extraction Method
Built-in extractor for oily water samples
Display
Measured value; 3 digits LCD with backlight message;
Character display LCD with back-light (16×2 characters)
Functions
Data memory up to 50 data, self diagnostics, stable type display,
interactive operation, calendar clock
Output
RS-232C, parallel printer port
Ambient Temperature
0 to 40ºC
Power
100 to 120 V AC ±10%,50/60 Hz, 80 VA
200 to 240 V AC ±10%,50/60 Hz, 120 VA
Dimensions, mm
200 × 315 × 342
Weight, kg
7
Catalogue No
Description
EN15-870
Oil Content Monitor
EN15-872
Extraction Solvent
EN15-874
Solvent Reclaimer
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
0 to 99.9 mg/L; 0.1 mg/L
33
[email protected]
Telephone: +44 (0)1635 872 929
EN15-856
This Hydrocarbon Analyser is designed to measure ppm levels of petroleum
hydrocarbons in water and also to meet field monitoring requirements.
In the analytical mode, it gives fast and accurate quantitative data for petroleum
hydrocarbons in water. The data correlates very well with laboratory gas
chromatographic analysis. In the screening mode, it offers fast relative data on
petroleum hydrocarbon contamination, tracking field gas chromatograph data
for TPH, and responds strongly to BTEX components. The unit works equally
well for ground water, surface water, waste water, and soil samples.
Typical applications include Site assessment, Storm / waste water monitoring,
Leak detection for buried fuel tanks, Well plume monitoring, Spill control &
Remediation monitoring
• Detects petroleum hydrocarbons directly in water
Meteorology
• Provides in-situ real time information
Soil /
Sediment
Testing
Analysis
Portable Hydrocarbon Analyser
• Pays for itself with lower analysis costs
• Reduces sample collection
• Logs data from 100 samples
• Easy to calibrate
• Serial output to laptop or printer
Vapour
Water
0-20,000 ppm as TPH
0-2,000 ppm as TPH
Lower limit of detection
<10 ppm as xylene
0.1 ppm as xylene
Hydrocarbons detected
c6 and higher MW petroleum
hydrocarbons
C6 and higher MW petroleum
hydrocarbons
Accuracy
±15% of reading
±10% of reading
Response time (initial)
<5 seconds
<5 seconds
<1 minute
<5 minutes
0° - 50°C
0° - 50°C
Trend correlation with
GC data
95%
98%
Display
Backlit LCD
Logging memory
Data from 100 samples
8 hours normal operation
Charge
12 hour charge period, AC or vehicle
Dimensions (WxHxD) mm
250 x 300 x 180
Weight, kg
4.5
Cable length, m
30
Catalogue No
Description
EN15-878
Portable Hydrocarbon Analyser
Catalogue No
Description
EN15-880
Soil Headspace Jar
EN15-882
Pre-Mixed Calibration Standards (20ml). 25 ppm solution
EN15-884
Pre-Mixed Calibration Standards (20ml). 50 ppm solution
Mobile
Laboratories
Accessories
Laboratory
Analytical
Equipment
Supplied complete with sets of 2 calibration solution, charger, interface cable,
and a professional air / water tight rugged carrying case.
Noise &
Vibration
Monitoring
Battery life
Air Quality
Monitoring
Response time (to 95%)
Operating temperature
range
Air / Dust
Sampling &
Monitoring
Specification
Operating range
Toxic Gas
Detection
• Easy to use menu driven software
Training
Telephone: +44 (0)1635 872 929
[email protected]
34
Oil / Water Interface Meter
The Oil / Water Interface Probe is used to determine the thickness of
hydrocarbon, in Light Non-Aqueous Phase (LNAPL) and Dense Non-Aqueous
Phase (DNAPL) in groundwater, and to also detect the presence of water in
storage tanks. It consists of a stainless steel shroud with a specially designed
float and conductive meter to minimise surface tension errors, providing
unparalleled accuracy. As the probe is lowered into the LNAPL, a single audible
buzz is heard and a green light shows. Once the probe reached the water at
the oil / water interface, a two-tone buzzer is heard and both the green and red
lamps show.
EN15-886
• Slim-line 20mm probe
• High accuracy
• Simple to use
• Easy to clean
• Robust construction
• Compact design
Specification
Shroud diameter
20mm
Shroud length
225mm
Shroud materials
Austenitic stainless steel
Probe material
Austenitic stainless steel
Float diameter
10mm
Float material
Hydrocarbon resistant
Audible indicator
High dB(A) dual buzzers
Power
9 V PP3 battery
Catalogue No
Description
EN15-886
Oil / Water Interface Meter 30m
EN15-888
Oil / Water Interface Meter 50m
EN15-890
Oil / Water Interface Meter100m
EN15-892
Oil / Water Interface Meterr 200m
Delivering to over 90 countries Worldwide...
Delivering direct
to your door
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Air/ Dust
Sampling &
Monitoring
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Testing
Analysis
35
[email protected]
Telephone: +44 (0)1635 872 929
EN15-894
This hand held digital density meter is the latest design in portable density
measurement. Designed for use in the most demanding industrial environments,
it provides the density, specific gravity or % concentration of your sample.
Need to save the data for later analysis? Measured results are stored in the
instruments memory – up to 1024 data points – and can easily be transferred to
a computer and printed later.
Two intrinsically safe versions are available, the casing of the basic version
is plastic, and this has many advantages, however with plastics the main
disadvantage is that not many are chemically resistant to both solvents and
acids & alkalis. For this reason we have two intrinsically safe versions.
Acid / Alkaline meter suitable for use in applications such as battery bank
monitoring.
Air / Dust
Sampling &
Monitoring
Specification
Repeatability
0.0005 g/cm3
Accuracy
0.001 g/cm3
Toxic Gas
Detection
Features:
•Ease of Use - Small, compact, light weight design
•No arm fatigue, even when measuring hundreds of samples daily
•Easily fits into tight spaces
•Designed so that display is easily seen, regardless of sampling position
•True one hand operation
•Pipette-style pump - Better control of sample flow
•Less effort required
•No bellows to crack or leak
•Entire pump assembly easily replaced
Meteorology
Solvent / Petrochemical meter is suitable for applications such as checking fuel
samples.
Soil /
Sediment
Testing
Analysis
Portable Digital Density Meter
Not required
Temperature Range
0 to 40 °C , filling at higher temperatures possible
Minimum Sample Volume
2 mL
Concentration Volume
Integrated tables (H2SO4, Brix,% alcohol, API gravity) and custom
functions
Interfaces
IrOBEX/IrLPT
Weight, g
396
Description
EN15-894
Portable Digital Density meter, Standard Version
EN15-896
Portable Digital Density meter, Acid / Alkaline Resistant
EN15-898
Portable Digital Density meter, Solvent / Petrochemical Resistant
Laboratory
Analytical
Equipment
Catalogue No
Noise &
Vibration
Monitoring
0 to 3 g/cm3
Viscosity Correction
Air Quality
Monitoring
Measuring Range
Mobile
Laboratories
Training
Telephone: +44 (0)1635 872 929
[email protected]
36
Digital Meters
EN16-102
Air/ Dust
Sampling &
Monitoring
Toxic Gas
Detection
Specification
Air Quality
Monitoring
Noise &
Vibration
Monitoring
Laboratory
Analytical
Equipment
Training
Mobile
Laboratories
Parameter
pH
Temperature
Range
-1.00 to 15.00 pH
0.0 to 50.0 ºC
Resolution
0.01 pH
0.1ºC
Accuracy
±0.01 pH
±0.5ºC
Calibration
Up to 3 points
USA: 4.01, 7.0, 10.01
NIST: pH 4.01, 6.86, 9.18
±5ºC in 1ºC increments
Automatic temperature
compensation (ATC)
EN16-106
37
pH / oC Waterproof, Pocket Meter
• Measures pH and Temperature, simple to use and waterproof
• Large custom dual display and unique ribbed body for better grip
• ±0.01 pH accuracy
• Temperature (oC) readout is suitable for most ASTM and EPA test procedures
• User replaceable double junction electrode - ideal for dirty water, heavy
metals, sulfides, and organics
• Auto-buffer recognition with choice of USA or NIST pH buffer standards
• Push-button calibration, Self-diagnostic messages, HOLD function, Auto-off, and Automatic Temperature Compensation
Meteorology
Soil /
Sediment
Testing
Analysis
-
Yes
Catalogue No
Description
EN16-102
pH / ºC, Waterproof, Pocket Meter
EN16-104
Replacement sensor
pH / oC / mV Hand Held Meter
• Portable meter measuring pH, Temperature and mV
• Very economical, low cost but high performance in pH accuracy and resolution
• mV measurement mode is useful for ORP measurements
• Multi-point calibration (up to 3 points)
• Push-button calibration, self-diagnostic messages, Hold function
• Auto-off feature
• Supplied complete with pH electrode, carrying kit and calibration standards and temperature probe
Specification
Parameter
pH
Temperature
Range
0.01 to 14.00 pH
0.0 to 100.0ºC
mV or Rel mV
±1000 mV
Resolution
0.01 pH
0.1ºC
1 mV
Accuracy
0.01 pH
±0.5ºC
±2 mV
Calibration
Up to 3 points (min 2)
±5.0ºC
(0.1ºC increments)
±50mV
(0.1 mV increments)
Catalogue No
Description
EN16-106
EN16-108
Replacement pH electrode, plastic body, gel filled
EN16-110
Replacement temperature probe
[email protected]
Telephone: +44 (0)1635 872 929
EN16-111
• Handheld pH meter for measuring pH, mV and Temperature
• Multi-point pH calibration (up to 6 Points) with pH buffer standards
• Auto-buffer recognition with for hassle-free operation
• Non-volatile memory stores and recalls up to 100 sets of pH and mV
• Self-diagnostic messages
• Ready indicator
• Auto-off
• RS232 output to PC with DAS software
• Supplied complete with pH electrode, temperature probe, 2 electrode holders and carrying case
Specification
pH
mV or Rel mV
Temperature
Range
-2.00 to 16.00pH
± 1999 mV (Extended)
-10 to 110ºC
Resolution
0.01 pH
0.1 mV (within ±199.9mV)
1mV (beyond ±199.9 mV)
0.1ºC
Accuracy
±0.01 pH
±0.2 mV (within ±199.9mV)
±2mV (beyond ±199.9 mV)
±0.5ºC
Calibration
up to 5 points
—
Meteorology
Parameter
±5.0ºC
(0.1º increments)
Description
EN16-111
EN16-116
EN16-110
EN16-112
pH
mV or Rel mV
Temperature
Range
-2.00 to 16.00 pH
±2000 mV
0.0 to 100.0ºC
Resolution
0.01 pH
0.1 mV (within ±199.9mV)
1 mV (beyond ±200 mV)
0.1ºC
Accuracy
± 0.01 pH
±0.2 mV (within ±199.9mV)
±1 mV (beyond ±200 mV)
± 0.3ºC
Calibration
Up to 6 points
± 150 mV
(1 mV increments)
± 5.0ºC (0.1º increments)
Description
EN16-112
pH / oC / mV Waterproof, Hand Held Meter
EN16-116
EN16-118
Mobile
Laboratories
Catalogue No
Laboratory
Analytical
Equipment
Parameter
Noise &
Vibration
Monitoring
Specification
Air Quality
Monitoring
• Compact and rugged waterproof meter for measuring pH,
mV, Relative mV and Temperature
• Non-volatile memory stores and recalls up to 50 sets of pH,
mV or relative mV readings with temperature (oC / oF)
• Real-time clock stamps stored data and calibration data with date / time
• Multi-point pH calibration (up to 6 points) with Auto-buffer
recognition for choice of USA, NIST, and DIN pH buffer standards
• Advanced setup allows you to customise meter parameters where required
• Self-diagnostic messages, ready indicator, auto-hold function, auto-off features
• Supplied with double junction pH electrode, temperature probe and case
Air / Dust
Sampling &
Monitoring
pH / oC / mV Waterproof, Hand Held Meter
Toxic Gas
Detection
Catalogue No
Soil /
Sediment
Testing
Analysis
pH / oC / mV Advanced Hand Held Meter
Training
Telephone: +44 (0)1635 872 929
[email protected]
38
EN16-114
Specification
Training
Parameter
pH
ORP
Temperature
Range
-2.00 to 16.00 pH
± 2000 mV
0.0 to 100.0°C
Rel. mV Range
-
± 2000 mV
-
Resolution
0.01 pH
0.1 mV (±199.9mV) /
1mV (beyond)
0.1°C
Accuracy
± 0.01 pH
±0.2 mV (±199.9mV) /
±2mV (beyond)
±0.3°C
Compensation
Calibration
-
-
ATC / MTC (0 to 100°C)
(pH only)
up to 5
Offset in 0.1 °incements;
offset range:±5.0°C
Buffer Sets
USA, NIST
-
Power
Requirements
Toxic Gas
Detection
Air/ Dust
Sampling &
Monitoring
Air Quality
Monitoring
Noise &
Vibration
Monitoring
Laboratory
Analytical
Equipment
Mobile
Laboratories
39
pH / oC / mV Bench Meter
Economical, user-friendly and accurate, the pH 700 is your ideal choice for
routine applications in laboratories, productions plants and schools.
• Large, easy-to-read display
• Ready indicator let you know when readings are stable
• Up to 5-point calibration with auto-buffer recognition
• Non-volatile memory holds up to 100 data points
• Integral electrode holder
Meteorology
Soil /
Sediment
Testing
Analysis
EN16-120
-
-
-
Catalogue No
Description
EN16-114
pH / oC / mV Bench Meter
EN16-108
Replacement pH electrode
EN16-124
9 V DC adapter, 1.3 A
(100 / 240 VAC, SMPS)
Ion / pH / °C Bench Meter
An intuitive, self-diagnostic and flexible instrument with advanced set-up
options for user-customization. View pH, ION or Redox reading together with
temperature, electrode status, calibration points, date and time all at once.
• Up to 6-point push button calibration with auto-buffer recognition
• Quick, easy electrode diagnosis with pH slope and offset display
• Non-volatile memory holds up to 500 data points – time and date-stamped
• Bi-directional RS232 for easy data transfer to computer
• Cal-due alarm – no more out-dated calibrations
• Auto-logging function for convenient continuous monitoring
• Limit alarm alerts when reading falls out of range
• Password protection for setup and calibration
Specification
Parameter
Range
pH
-2.000 to 20.000 pH
Rel. mV Range
-
ORP
ION
Temperature
±2000.0 mV
0.001 TO 19999
PPM (±2000 mV)
0.0 to 100.0°C
±2000.0 mV
-
Resolution
0.1 / 0.01 / 0.001 pH
0.1 mV
2 or 3 digits
0.1°C
Accuracy
±0.002 pH + 1LSD
±0.2 mV
0.5% full scale
(monovalent);
1% full scale
(divalent)
±0.3°C
Calibration
Up to 6 preset or 5
custom
Buffer Sets
USA, NIST, DIN User
1, User 2, Custom
Power
Requirements
2 to 8
-
-
9 V DC adapter, 1.3 A (100 / 240 VAC, SMPS)
Catalogue No
Description
EN16-120
Ion pH/ °C Bench Meter
EN16-122
Replacement ion / pH electrode
EN16-124
[email protected]
-
-
Telephone: +44 (0)1635 872 929
EN16-126
The advanced Bench Meter offers easy, single-channel operation for pH and
ORP measurements without compromising on performance or features.
Meteorology
• Auto-calibrates with up to five pH buffers from three standard sets and fifteen different buffers; also accepts custom buffers and manual calibration
• Accepts standard BNC pH glass electrodes and DIN pH ISFET electrodes - no need for adapters
• Wide pH and mV measurement range of -2.000 to 20.000 pH and
± 2000.0 mV
• Advanced real-time on-screen graphing function provides useful indication for specific measurements such as titration.
• Advanced USB, IRDA connectivity allows extensive host / device
communication capabilities.
• Ethernet / Internet-ready with RJ45 input for connection to LAN or Internet for quick research and data sharing.
• Secure log-in for up to ten users
•Complete with pH electrode, ATC probe, electrode holder, SMPS power
adapter, RS232 cable & software
Specification
Model No
Range
pH
Temp
mV
±2000.0mV
-5.0 to 105.0°C
0.1 / 0.01 / 0.001
0.1°C
0.1mV
Accuracy
±0.1 / 0.01 / 0.002
0.2°C
±0.2mV
Memory
100 Data sets
Output
USB, IrDA, RS232C
Dimensions (WxDxH) cm
Toxic Gas
Detection
-2.000 to +20.000
Resolution
Soil /
Sediment
Testing
Analysis
pH / °C / mV Advanced Bench Meter
23.5 x 16.5 x 8.9
Description
EN16-126
pH / oC / mV Advanced Bench Meter
EN16-127
Replacement pH electrode
EN16-128
Air / Dust
Sampling &
Monitoring
Catalogue No
EN16-129
Laboratory
Analytical
Equipment
Specification
Noise &
Vibration
Monitoring
• Measures conductivity and temperature in one simple, portable instrument
• Cup-type sensor scoops or dips into samples for greater flexibility
• Includes Push-button calibration
• HOLD function
• Auto-off
• Self-diagnostic features
• Waterproof,
• Dustproof
• Automatic Temperature Compensation
Air Quality
Monitoring
Conductivity, Waterproof, Pocket Meter
0-200 µS/cm, 0-2000µS/cm, 0-20 mS/cm
Resolution
0.1 µS/cm, 1µS/cm, 0.01mS/cm
Accuracy
± 1% full scale
Calibration
3 Auto / 3 Manual
Temperature Display
Range: -0oC to 50.0oC; Resolution: 0.1oC; Accuracy: ±0.5oC
Temperature Calibration
±5.0oC (0.1oC increments)
Catalogue No
Description
EN16-129
Conductivity, Waterproof Meter
EN16-130
Replacement conductivity sensor
Mobile
Laboratories
Range
Training
Telephone: +44 (0)1635 872 929
[email protected]
40
EN16-132
lConductivity / TDS / oC Hand Held Meter
• Hand held meter for measuring Conductivity and Temperature
• Single point and multi-point automatic or manual calibration
• User customisation of the following functions:
- Normalisation temperature
- Automatic / manual temperature compensation from 0ºC to 100ºC
- User adjustable TDS factor
- Cell constant and reset to factory settings
• Hold and auto power-off functions
• Easy to read high contrast display
• Splash proof keypad designed for easy finger touch operation
• Supplied with a rubber boot to protect the meter from accidental damage
• The hinge at the back allows for easy benchtop viewing
• Supplied with conductivity electrode with ATC and carrying kit set
Specification
Conductivity range
0 to 19.99, 20.0µS/cm, 199.9 µS/cm, 200 to 1999 µS/cm,
2.00 to 19.99 mS/cm, 20.0 to 199.9 mS/cm
Resolution and accuracy
0.01, 0.1, 1 µS/cm; 0.01, 0.1 mS/cm & ±1% Full Scale
No. of calibration points
5, maximum 1 per range
Temperature range
-10.0 to 110.0°C
Resolution and accuracy
0.1°C & ±0.5°C
Cell constant
0.1, 1.0, 10.0 (selectable)
Temperature coefficient
0.0 to 3.0%/°C
Normalisation temperature
20.0 & 25.0 ºC
Catalogue No
Description
EN16-132
Conductivity / TDS / ºC Hand Held Meter
EN16-134
Replacement conductivity electrode, ultem-body with ATC, BNC
Note:
For a wide range of meters and other
laboratory equipment please see our
General Lab Catalogue. Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Air/ Dust
Sampling &
Monitoring
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Testing
Analysis
41
[email protected]
Telephone: +44 (0)1635 872 929
EN16-136
• Hand held meter for measuring Conductivity / TDS
• Single and Multi-point automatic or manual calibration
• Automatic / manual temperature compensation from 0 to 100oC
• User adjustable TDS factor
• Hold, power-off and self-diagnostic message functions
• Rugged, splash-proof design
• Supplied complete with carrying case, calibration standards, rinse bottle and
conductivity electrode with ATC
Specification
Conductivity
TDS
Temperature
Range
0 to 19.99, 20 to199.9, 200
to1999 µS/cm;
2.00 to 19.99,
20.0 to 199.9 mS/cm
0 to 9.9, 10 to 99.9,
100 to 999 ppm;
1.00 to 9.99, 10.0 to
99.9ppt
-10ºC to 110ºC
Resolution
0.01, 0.1, 1µS;
0.01, 0.1mS
0.01, 0.1, 1ppm; 0.01,
0.1ppt
0.1°C
Accuracy
±0.2, 2, 20µS/cm;
±0.2,2mS/cm
±0.1, 1, 10ppm;
±0.1, 1ppt
±0.5oC
Calibration
up to 5 points (1 per range)
0.40 to 1.00
—
TDS Factor
Description
EN16-136
Conductivity / TDS / ºC Hand Held Meter
EN16-138
Replacement conductivity / TDS electrode, ultem-body with 6 pin connector
EN16-140
Conductivity
TDS
Temperature
Range
0 to 19.99, 199.9,
1999 µS/cm
2.0 to 19.99mS/cm
20 to 199.99mS/cm
0 to 9.99, 99.9, 999.9 ppm;
9.99, 99.9 ppt,
max. 199.9 ppt based on
factor settings
0.0ºC to 100.0oC;
Resolution
0.05% Full Scale
Accuracy
Calibration
0.1oC
±1% full scale
±0.5°C
4 points (1 per range) Auto
5 points (1 per range) Manual
Description
EN16-140
Conductivity / pH / TDS / oC Hand Held Meter
EN16-138
Mobile
Laboratories
Catalogue No
Laboratory
Analytical
Equipment
Measurement
Noise &
Vibration
Monitoring
Specification
Air Quality
Monitoring
• Multi parameter, portable instrument for measuring Conductivity,
Temperature and TDS
• Stores and recalls up to 16 sets of readings
• Convenient data transfer with RS232 output
• Multi-point calibration for unprecedented full-range accuracy
• Advanced setup allows you to customise meter parameters
• Self-diagnostic messages, Hold function, Ready indicator, Auto-off features
• Supplied complete with carrying case, bottles, calibration standards and
conductivity electrode
Air / Dust
Sampling &
Monitoring
Conductivity / TDS / oC Hand Held Meter
Toxic Gas
Detection
Catalogue No
Meteorology
Measurement
Soil /
Sediment
Testing
Analysis
Conductivity / TDS / oC Hand Held Meter Training
Telephone: +44 (0)1635 872 929
[email protected]
42
EN16-144
Air/ Dust
Sampling &
Monitoring
Toxic Gas
Detection
Specification
Air Quality
Monitoring
Noise &
Vibration
Monitoring
Laboratory
Analytical
Equipment
Training
Mobile
Laboratories
43
Conductivity / pH / TDS / oC Waterproof,
Hand Held Meter
• Waterproof and Dustproof Housing - IP67 rated, ideal for rugged harsh conditions. Plus it floats!
• Multi-parameter - toggle between pH/temperature and Conductivity/
temperature at touch of buttons
• Multi-Point Push-button Calibration (up to 3/4 points for pH/Conductivity) - for easy, quick calibration
• Auto-Ranging for Conductivity measurements for fast response and best resolution over measurement range
• User-Customization for enhanced flexibility and viewing of Conductivity/TDS effective cell constants per range, electrode diagnosis - pH slope/offset/mV base value, previous calibration points, etc.
• Stability Indicator prompts whenever reading stabilizes
• Auto-Hold Function automatically freezes reading when stabilized for easy viewing and recording
• Easy Interchangeability of electrodes caters for other specialty electrodes for specific applications
• Rugged Carrying Case (Included) provides handy on-site meter calibration and measurement
Meteorology
Soil /
Sediment
Testing
Analysis
EN16-148
Measurement
Conductivity
TDS
Temperature
pH
Range
0 to 19.99,
199.9, 1999 µS/cm
0 to 19.99, 199.9 mS/cm
0 to 9.99, 99.9,
999.9 ppm;
9.99, 99.9 ppt,
max of 199.9 ppt
(based on factor setting)
0.0ºC to 100.0ºC
-2 to 16
Resolution
0.01, 0.1,1 µS/cm;
0.01, 0.1 mS/cm
0.01, 0.1, 1 ppm;
0.01, 0.1,1 ppt
0.1ºC
0.01
Accuracy
±1% full scale
±0.3ºC
± 0.01
Calibration
5 points (1 per range)
±5.0ºC
(0.1ºC
increments)
Up to 5
Catalogue No
Description
EN16-144
Conductivity / pH / TDS / oC Waterproof, Hand Held Meter
EN16-116
EN16-138
Conductivity / TDS / oC Bench Meter
• Low Cost, high performance meter for measuring Conductivity and TDS with auto-ranging capability for fast response, with ±1% full scale accuracy
• Up to 1 or 5-point automatic or manual calibration
• Non-volatile memory stores and recalls up to 50 data sets of conductivity, TDS readings with temperature
• Advanced setup allows you to customise meter parameters
• Supplied with conductivity electrode (k=1), integral electrode holder and power adapter
Specification
Measurement
Conductivity
TDS
Temperature
Range
0 to 19.99, 199.9,
1999 µS/cm
0 to 19.99, 199.9 mS/cm
0 to 9.99, 99.9, 999.9 ppm;
9.99, 99.9 ppt,
max of 199.9 ppt
(depending on factory setting)
-10ºC to 110.0ºC
Resolution
0.01, 0.1,1 µS/cm;
0.01, 0.1 mS/cm
0.01, 0.1, 1 ppm;
0.01, 0.1,1 ppt
0.1ºC
Accuracy
±1% full scale + 1 digit
±0.3ºC
Calibration
5 points (1 per range)
±5.0ºC
(0.1ºC increments)
Catalogue No
Description
EN16-148
Conductivity / TDS / oC Bench Meter
EN16-150
[email protected]
Telephone: +44 (0)1635 872 929
EN16-152
• Multi parameter waterproof instrument for measuring Dissolved Oxygen (D.O.)
and Temperature
• Non-volatile memory stores and recalls up to 50 sets of D.O. readings (mg/1 or ppm or % saturation) with temperature (oC/oF)
• Real-time clock stamps stored data and calibration data with time / date
• Advanced setup allows you to customise meter parameters view calibration data, electrode diagnosis etc
• Automatic compensation for salinity and barometric pressure
• Self-diagnostic messages, HOLD function, Ready indicator, Auto-off features
• Supplied with carrying kit and bottles for solution, submersible D.O. probe and D.O. probe maintenance kit
Specification
mg/1 (ppm)
% Saturation
Temperature
Range
0.00 to 20.00 mg/1
(ppm)
0.0 to 200%
0 to 100.0ºC
Resolution
0.01 mg/1 (ppm)
0.1%
0.1ºC
Accuracy
±1.5% full scale
±1.5% full scale
±0.3ºC
Calibration
1 point
(100% air saturation or in
air saturated water);
plus separate mg/1 (ppm) offset
Catalogue No
Description
EN16-152
Dissolved Oxygen, Waterproof, Hand Held Meter
EN16-154
Replacement galvanic dissolved oxygen electrode with ATC, 3m cable
Meteorology
Parameter
±5.0ºC
(0.1º increments)
Toxic Gas
Detection
EN16-156
Replacement galvanic dissolved oxygen electrode with ATC, 3m cable
Mobile
Laboratories
Dissolved Oxygen / °C Bench Meter
EN16-157
Laboratory
Analytical
Equipment
Description
EN16-156
Noise &
Vibration
Monitoring
Catalogue No
Air Quality
Monitoring
Designed for optimal performance and versatility, the D.O. meter come
with intuitive, advance set-up options for extensive user-customization at an
affordable price.
Meter comes with self-stirring probe and bi-directional RS232 – ideal for BOD
and other Dissolved Oxygen applications in the laboratory.
• Measures Dissolved Oxygen in % saturation, ppm, mg/L at ±0.5 % full scale accuracy
• Automatic calibration at 100 % and independent 0 % – greater measurement sensitivity during low oxygen levels
• Accurate readings in varying conditions with Temperature, Salinity and Barometric Pressure Compensation
• Non-volatile memory holds up to 500 data points – time and date-stamped for GLP compliance
Air / Dust
Sampling &
Monitoring
Dissolved Oxygen / °C Bench Meter
Soil /
Sediment
Testing
Analysis
Dissolved Oxygen, Waterproof,
Hand Held Meter
Training
Telephone: +44 (0)1635 872 929
[email protected]
44
EN16-158
• D.O. measurement includes five-day BOD testing, OUR, and SOUR. Simple D.O. measurement ranges from 0 to 60 mg/L and 0 to 600% saturation
• Advanced real-time on-screen graphing function provides useful indication for specific measurements
• Extensive setup screens enable you to customise meter to your needs, e.g. Barometer and Salinity Setting, BOD / OUR / SOUR Configuration, Alarm Limits and other functions
• Advanced USB, IRDA connectivity allows extensive host / device communication capabilities
• Ethernet / Internet-ready with RJ45 input for connection to LAN or Internet for quick online research and data sharing
• Secure log-in for up to ten users
Specification
Measurement
Dissolved Oxygen
% Saturation of Oxygen
Temperature
Range
0 to 60mg/L or ppm
0 to 600%
0 to 45°C
Resolution
0.01mg/L or ppm
0.1%
0.1°C
Toxic Gas
Detection
Accuracy
±0.5% Full scale + 1 LSD
Memory
100 Data Sets
Output
USB, IrDA, RS232C
Power Requirements
EN16-162
±0.1°C
9V DC Adapter, 3.3mA
Dimensions (wxdxh) cm
Air/ Dust
Sampling &
Monitoring
Air Quality
Monitoring
Noise &
Vibration
Monitoring
Dissolved Oxygen / BOD / °C Bench Meter
Touch screen simplicity and versatility make the Dissolved Oxygen (D.O.) Bench
Meter the most advanced benchtop D.O. meter available and the easiest to use.
Enter seed volume and other BOD data and it will take care of the rest.
Meteorology
Soil /
Sediment
Testing
Analysis
23.5 x 16.5 x 8.9
Catalogue No
Description
EN16-158
Dissolved Oxygen / BOD / °C Bench Meter
EN16-160
Dissolved Oxygen / BOD electrode with self stirring mechanism,
1m cable
Turbidity Meter
Hand held waterproof Turbidity meter
• Auto-ranging up to 1000 NTU
• Multi-point automatic calibration (up to 4 points)
• Self-diagnostic messages, quick stable responses and maintenance-free
• Infra-Red light source
• Supplied with calibration kit and carrying case
Range
0 to 1000 NTU
Resolution
0.01, 0.1, 1 NTU (dependent on measurement & range)
Accuracy
±2% / ±3% of reading
Calibration
Push button at 0.02, 20.0, 100 & 800 NTU
Dimensions (WxLxH), mm
68 x 155 x 46
Weight, g
200
Catalogue No
Description
EN16-162
Turbidity Meter
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Specification
45
[email protected]
Telephone: +44 (0)1635 872 929
EN16-164
A highly accurate Turbidity meter especially designed for water quality
measurements. Meets and exceeds the requirements of USEPA and Standard
Methods. The instrument is based on a state-of-the-art optical system which
guarantees accurate results, long term stability and minimizes stray light and
colour interferences. It also compensates for variations in intensity of the LED,
limiting the need for frequent calibration.
• Multi-Range through 0-4000 NTU
• 2, 3,4 or 5 point calibration with supplied standards
• Good Laboratory Practice (GLP) function for traceability of calibration
conditions
• User friendly Graphical LCD display with guidance notes
• Log up to 200 records
Specification
0.00 to 9.99; 10.0 to 99.9; 100 to 4000 NTU
Resolution
0.01; 0.1; 1 NTU
Range Selection
Automatically
Accuracy
±2% of reading plus 0.02 NTU
±5% of reading above 1000 NTU
±1% of reading or 0.02 NTU whichever is greater
Stray Light
< 0.02 NTU
Light Detection
Silicon Photocell
Method
Nephelometric method (90°)
Measuring mode
Normal, Average, Continuous
Turbidity Standards
<0.1, 15, 100, 750 and 2000 NTU
Calibration
Two, three, four or five-point calibration
Light Source
Tungsten filament lamp
Lamp life
greater than 100,000 readings
Display
40 x 70mm graphic LCD (64x128 pixels) with backlight
Logging Memory
200 records
Serial Interface
USB
Power Supply
230 V / 50 Hz or 115 V / 60 Hz 20 W
Auto Shut-off
After 15 minutes of non-use
Toxic Gas
Detection
Repeatibility
Meteorology
Range
Soil /
Sediment
Testing
Analysis
Turbidity Bench Meter
Air / Dust
Sampling &
Monitoring
Air Quality
Monitoring
Bench Turbidity Meter supplied with 5 sample cuvettes and caps,
calibration cuvets, silicone oil, tissue for wiping cuvettes, power
adapter and instruction manual.
EN16-166
Calibration set for turbidimeter
EN16-168
Solution for cleaning cuvettes
EN16-170
Silicon oil (15 mL)
EN16-172
Tissue for wiping cuvettes
EN16-174
Glass cuvettes
EN16-176
Caps for cuvettes
EN16-178
Windows® Compatible Software
Laboratory
Analytical
Equipment
Description
EN16-164
Noise &
Vibration
Monitoring
Catalogue No
Mobile
Laboratories
Training
Telephone: +44 (0)1635 872 929
[email protected]
46
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Air/ Dust
Sampling &
Monitoring
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Testing
Analysis
47
Salinity Waterproof Pocket Meter
EN16-180
• Direct temperature readout
• Large screen dual-display
• Automatic Temperature Compensation (ATC)
• Waterproof to IP67 standard
Specification
EN16-180
Salinity range
To 10.00 ppt
Salinity resolution
0.10 ppt
Salinity accuracy
±1% Full scale
Temperature range
0 to 50°C
Temperature resolution
0.1°C
Temperature accuracy
±0.5°C
Power
4 x 1.5v A76 Micro Alkaline Batteries. Life: 50 Hours
Dimensions, cm
16.5 x 3.8
Salinity Hand Held Meter
EN16-184
• Measures salinity in ppt and in %
• Temperature measurement with 0.1°C resolution
• Push button calibration with ±1% full scale accuracy
• Electrode with built-in ATC
• Protective rubber boot also acts as a stand
• Supplied with carrying case and standard solutions
Specification
EN16-184
Salinity range
1.0 to 50.00 ppt / 0.1 to 5.00%
Salinity resolution
0.1 ppt / 0.01%
Salinity accuracy
±1% Full scale
Temperature range
-10 to 100°C
Temperature resolution
0.1°C
Temperature accuracy
±0.5°C
Power
4 x 1.5v, AAA Batteries, Life: 100 Hours
Dimensions, cm
15.7 x 8.5 x 4.2
Buffer Tablets
Ideal for when small amounts of buffer are required to quickly calibrate a pH
meter in the laboratory or field. Distilled water is added to the tablet which
dissolves to give a standard pH buffer solution.
Catalogue No
Description
EN16-200
pH buffer tablets, pH 4, Box of 50
EN16-202
EN16-204
Buffer and Calibration Solutions for pH
and Multi-Parameter Meters
Buffers and calibration solutions for pH, REDOX and Conductivity, packed in
500ml leak-proof bottles. Economical and popular for laboratory use.
Catalogue No
Description
EN16-206
pH buffer solution, pH 4, 500ml
EN16-208
EN16-212
EN16-214
Conductivity standard solution, 1413 µS, 500ml
EN16-216
Conductivity standard solution, 12.88 mS, 500ml
EN16-218
Conductivity standard solution, 111.8mS, 500ml
EN16-220
Redox standard solution, 258mV, 500ml
EN16-222
Redox standard solution, 458mV, 500ml
[email protected]
Telephone: +44 (0)1635 872 929
Soil /
Sediment
Testing
Analysis
pH / ORP/ ION / Conductivity / TDS / Salinity /
Resistivity / °C Bench Meter
EN16-224
Your all-in-one solution for multi-parameter research work in the lab. Reliable,
accurate and intuitive with user-friendly functions. The meter comes with a
multi-data screen that includes temperature, electrode status, calibration points,
date and time along with your desired measurement parameter, measures pH,
ORP, ION, Conductivity, TDS, Salinity, or Resistivity.
Meteorology
• Choose auto-calibration with preset values for quick easy calibration, or manual multi-point calibration for greater accuracy
• Easy standardization with auto-standardization feature – detect the exact cell constant value of your electrodes with the press of a button
• Up to 6-point calibration with auto-buffer recognition
• Includes high performance 4-cell Conductivity probe
• Quick, easy electrode diagnosis with the effective cell constants display
• Automatic temperature control
• Mains power 110 / 240 V
Parameter
Range
pH
ORP
ION
±2000.0 mV
Concentration
TDS
Salinity
Resistivity
0.050 µS to
500.0 mS
0.050 ppm to
500 ppt (@TDS
factor 1.00
0.0 to 80.0 ppt
2.000 Ohm to
20.0 MOhm
Temperature
0.0 to
100.0°C
0.01 / 0.1 Ohm;
0.001 / 0.1
KOhm; 0.01
MOhm
±1% full scale
0.1°C
0.001 TO 19999
PPM (±2000 mV)
Rel. mV Range
±2000.0 mV
0.1 / 0.01 / 0.001
pH
Accuracy
±0.002 pH +
1LSD
Calibration
points
Up to 6 preset
or 5 custom
Buffer Sets
USA, NIST, DIN
User 1, User 2,
Custom
0.1 mV
2 or 3 digits
0.01/0.1 µS ;
0.001 / 0.01 /
0.1 mS
0.01 / 0.1ppm;
0.001 / 0.01 /
0.1 ppt
0.01 / 0.1
ppm; 0.001 /
0.01 / 0.1 ppt
±0.2 mV
0.5% full scale
(monovalent);
1% full scale
(divalent)
±5% full scale
±1% full scale
±1% full scale
2 to 8
Up to 5
Up to 5
±0.3°C
Noise &
Vibration
Monitoring
Resolution
Air Quality
Monitoring
Conductivity
Air / Dust
Sampling &
Monitoring
-2.000 to 20.000
pH
Toxic Gas
Detection
Specification
Description
EN16-224
pH / ORP / ION / Conductivity / TDS / Salinity / Resistivity Bench Meter
EN16-122
Replacement ion / pH electrode
EN16-226
4 Cell Conductivity / ATC Electrode, Graphite Sensor, Epoxy Body
Laboratory
Analytical
Equipment
Catalogue No
Mobile
Laboratories
Training
Telephone: +44 (0)1635 872 929
[email protected]
48
EN16-230
Conductivity / TDS / Resistivity / °C Bench Meter
Featuring auto-standardization, auto-calibration and auto-ranging capabilities,
the meter accepts 2-cell and 4-cell electrodes, allowing a broad range of
measurement at up to ±1 % full scale accuracy. Meter comes with a multi
data screen that shows Conductivity readings, temperature, electrode status,
calibration points, date and time all at once.
• Choose auto-calibration with preset values for quick easy calibration, or manual multi-point calibration for greater accuracy
• Easy standardization with auto-standardization feature – detect the exact cell constant value of your electrodes with the press of a button
• Quick, easy electrode diagnosis with the effective cell constants display
• Replatinization in 5 minutes with the built-in replanitization circuit
• Mains power 110 / 240 V
Specification
Parameter
Conductivity
TDS
Salinity
Resistivity
Temperature
Range
0.050 µS to
500.0 mS
0.050 ppm to
500 ppt
(@ TDS factor
1.00)
0.0 to 80.0 ppt
2.000 Ohm to
20.0 MOhm
0.0 to
100.0 ºC
Normalization
15.0 to
30.0 ºC
Resolution
0.01 / 0.1 µS;
0.001 / 0.01 /
0.1 mS
0.01 / 0.1 ppm; 0.01 / 0.1 ppm; 0.01 / 0.1 Ohm ;
0.1 ºC
0.001 / 0.01 /
0.001 / 0.01 /
0.001 / 0.1 kOhm;
0.1 ppt
0.1 ppt
0.01 MOhm
Accuracy
±1 % full scale ±1 % full scale ±1 % full scale ±1 % full scale
±0.3 ºC
Coefficient
Linear &
pure; 0.000
to 10.000 %
Compensation
ATC / MTC
Calibration
points
Up to 5
Catalogue No
Up to 5
Description
EN16-230
Conductivity / TDS / Resistivity / °C Bench Meter
EN16-226
Replacement – 4-Cell Conductivity / ATC Electrode, Graphite Sensor,
Epoxy-Body
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Air/ Dust
Sampling &
Monitoring
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Testing
Analysis
49
[email protected]
Telephone: +44 (0)1635 872 929
EN16-232
Specification
Conductivity
TDS
Salinity
Resistivity
Temp
Range
0 to 200µS/cm
200 to 2000µS/cm
2 to 20mS/cm
20 to 500mS/cm
0 to 200ppm
200 to 2000ppm
2 to 20ppt
20 to 200 ppt
0 to 90ppt
0 to 19.99kû
20 to 199.9kû
200k_ to 1.999Mû
2. to 100Mû
-5 to
105°C
Resolution
0.001 / 0.01 / 0.1µS
/ cm
0.001 / 0.01 /
0.1mS/cm
0.001 /
0.01/0.1ppm
0.001 / 0.01 /
0.1ppt
0.1 / 0.01 /
0.001ppt
0.1 / 0.01 / 0.001kû 0.1°C
0.01 / 0.001Mû
±0.5% Full Scale + 1 digit
±0.2°C
4 points Auto & Manual
Dimensions,
cm, (wxdxh)
23.5 x 16.5 x 8.9
Description
EN16-232
Conductivity / TDS / Salinity / Resistivity / °C Bench Meter
EN16-234
Epoxy -body 4 ring conductivity electrode with ATC, Cell constant K=1.0,
DIN connector, 1m cable
Require General Laboratory Equipment?
Please refer to our General Lab Catalogue.
Noise &
Vibration
Monitoring
Note:
Air Quality
Monitoring
Catalogue No
Air / Dust
Sampling &
Monitoring
Accuracy
Calibration
Toxic Gas
Detection
Measurement
Meteorology
•Single and Multi point standardisation for Conductivity, Resistivity, TDS and Salinity measurements using two-cell and four-cell probes, with built-in
replatinising circuit
•Advanced real-time on-screen graphing function provides useful indication for specific measurements
•Extensive setup screens enable you to customise meter to your needs, e.g. Cell Constant, Temperature Coefficient, TDS factor, Alarm Limits and other functions
•Windows® CE-driven, full-colour touch screen provides unmatched ease of use in operations and setups with user-friendly icons, user prompts and
context specific ‘help’ screens
•Advanced USB, IRDA connectivity allows extensive host / device
communication capabilities
•Ethernet / Internet-ready with RJ45 input for connection to LAN or Internet for quick online research and data sharing, with secure log-in for up to ten users.
Soil /
Sediment
Testing
Analysis
Conductivity / TDS / Salinity / Resistivity / °C
Bench Meter
Laboratory
Analytical
Equipment
Mobile
Laboratories
Training
Telephone: +44 (0)1635 872 929
[email protected]
50
Multi-Parameter
Water Quality Meters
Multi-parameter Water Quality Monitor
This monitor is capable of measuring up to 11 parameters in the field simply by
submerging the probe into a water course and using the control unit to run the
test and view results.
Meteorology
Soil /
Sediment
Testing
Analysis
Innovative sensor technologies combine with a durable and ergonomic design
making this instrument simple to use, rugged, and easy to maintain in the field.
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Air/ Dust
Sampling &
Monitoring
Toxic Gas
Detection
EN16-300
51
An integrated GPS system allows users to identify exactly where results were
taken and record other location information, providing more informative
analyses.
The instrument can be used to measure both surface and ground water in a
variety of settings such as rivers, lakes, industrial systems, wells and bore-holes.
Features
• Easy to read LCD screen – clear display even in bright sunlight conditions
• Integral GPS receiver for position tagging of readings – adds context to your results to facilitate environmental surveys
• Built-in data logger - store 1900 results on the meter and then download these to a computer via USB
• Simple to use, multi-lingual menu system – control all setup, calibration and test procedures
• Shock resistant and waterproof casing
Meter
Specification
Display
80 Character FSTN LCD with backlight
Data Memory
1900 full sets plus GLP data
GPS Receiver
12 channels with integral antenna
GPS Accuracy
± 10m in all 3 dimensions
Atmospheric Pressure
150mb - 1150mb ± 1mb
Languages
English / French / Spanish (German on request)
PC Interface
USB (cable provided)
Power Supply
5 x AA cells, Alkaline, or Ni-MH rechargeable
Battery Life
Alkaline >20 hours
Ni-MH >40 hours
Operating Temperature
-20ºC - +70ºC
Protection Class
IP67 (30 mins at 1m)
Dimensions, mm
(H x W x D)
180 x 90 x 39
Weight, g (inc. batteries)
450
Probes
Specification
Protection Class
IP68 (permanent immersion at 10m)
Immersion Depth
min 75mm, max 30m
-5ºC - +50ºC
Dimensions, mm (L x H)
290 x 48
Weight, g (incl. cable)
725
[email protected]
Telephone: +44 (0)1635 872 929
EN16-300
Control Unit with integral GPS, supplied complete with 5AA Alkaline
Cells, USB cable, instruction manual and software, with carrying
case. Probe not included.
PROBES
EN16-315
EN16-314
EN16-313
EN16-312
EN16-311
depth
dissolved oxygen
(galvanic)
dissolved oxygen
(optical)
orp
ph
resistivity
salinity
range
0 - 200 mS/cm (200,000 µs/cm)
resolution
3 Auto-range scales: 0 - 9999 µS/cm, 10.00 - 99.99 mS/cm
accuracy
± 1% of reading or ± 1 µS/cm if greater
✔
✔
✔
✔
✔
–
✔
range
0 - 30 m (0 - 100 F)
resolution
0.01 m (0.01 F)
accuracy
± 0.1 m (± 4 F”)
✔
*
*
*
*
*
*
*
range
0 - 500% / 0- 50.00 mg/L
resolution
0.1% / 0.01 mg/L
accuracy
± 1% of reading
*
*
✔
✔
✔
✔
–
✔
range
0 - 500% / 0- 50 mg/L
resolution
0.1% / 0.01 mg/L
accuracy
±1% of reading (0-200%, 0-20mg/L) or ±10% (200-500%, 20-50mg/L)
✔
✔
*
*
*
*
*
*
range
± 2000 mV
resolution
0.1 mV
✔
✔
✔
✔
O
O
O
–
accuracy
± 0.5 mV
range
0 - 14 pH / ± 625 mV
resolution
0.01 pH / ± 0.1 mV
accuracy
± 0.01 pH / ± 0.5 mV
✔
✔
✔
✔
✔
✔
✔
–
range
5Ω cm - 1MΩ cm
resolution
2 Auto-range scales: 5 - 9999Ω cm, 10.0 - 1000.0 KΩ cm
accuracy
± 1% of reading or 1 Ω cm if greater
✔
✔
✔
✔
✔
✔
–
✔
range
0 - 70 PSU / 0 - 70 ppt (g/Kg)
resolution
0.01 PSU / 0.01 ppt
accuracy
± 1% of reading or ± 0.1 unit if greater
✔
✔
✔
✔
✔
✔
–
✔
seawater specific
gravity
range
0 - 50
resolution
0.1
accuracy
± 1.0
✔
✔
✔
✔
✔
✔
–
✔
range
0 - 100,000 mg/L (ppm)
tds
resolution
2 Auto-range scales: 0 - 9999 mg/L, 10.00 - 100.00 g/L
accuracy
± 1% of reading or ± 1 mg/L if greater
✔
✔
✔
✔
✔
✔
–
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
–
✔
–
✔
–
t
range
-5ºC - + 50ºC (23ºF - 122ºF)
resolution
0.1ºC / F
accuracy
± 0.5ºC
range
0 - 1000 NTU
resolution
2 Auto-range scales: 0.0 - 99.9 NTU, 100-1000 NTU
repeatability
± 2% of auto-ranged scale
* = OPTIONAL
– = NOT AVAILABLE ON THIS PROBE
Additional Accessories
O = OPTIONAL ORP ELECTRODE REPLACES pH ELECTRODE
Calibration & Maintenance Solutions
Catalogue No
Description
EN16-341
Heavy Duty Flow-Through Cell
EN16-360
300ml Calibration Solution
EN16-342
5m Extension Cable
EN16-361
600ml Calibration Solution
EN16-343
10m Extension Cable
EN16-362
300ml pH7.00 Buffer
EN16-344
30m Extension Cable
EN16-363
600ml pH7.00 Buffer
EN16-345
Galvanic Dissolved Oxygen Membrane Kit
EN16-364
300ml pH4.01 Buffer
EN16-346
Optical Dissolved Oxygen Sensor Cap
EN16-365
600ml pH4.01 Buffer
EN16-347
pH / ORP Electrode Storage Cap
EN16-366
150ml Zero Oxygen Solution
EN16-348
Replacement pH Electrode
EN16-367
600ml Zero Oxygen Solution
EN16-349
Optional ORP Electrode
EN16-368
25ml Dissolved Oxygen Filling Solution
EN16-350
Combined pH / ORP Electrode
EN16-369
25ml Storage Solution
EN16-370
Calibration / Rinse Bottle
Telephone: +44 (0)1635 872 929
[email protected]
Training
Description
Mobile
Laboratories
Catalogue No
Laboratory
Analytical
Equipment
✔ = STANDARD FUNCTION
Noise &
Vibration
Monitoring
turbidity
t
t
Air Quality
Monitoring
temperature
Air / Dust
Sampling &
Monitoring
EN16-316
conductivity
Toxic Gas
Detection
EN16-317
✔
(except EN16-312), pH storage cap (except EN16-311) and instruction manual.
Meteorology
EN16-318
Probes are supplied with a 3 metre cable (extensions available), calibration
solution, rinse bottles, dissolved oxygen membrane kit
Soil /
Sediment
Testing
Analysis
MULTI-PARAMETER WATER QUALITY MONITOR
52
Training
Mobile
Laboratories
Laboratory
Analytical
Equipment
Noise &
Vibration
Monitoring
Air Quality
Monitoring
Air/ Dust
Sampling &
Monitoring
Toxic Gas
Detection
Meteorology
Soil /
Sediment
Testing
Analysis
53
Remote Water
Quality Monitoring
Paqua-Stat
Automatic Water Quality Monitoring Stations
The Paqua-Stat is a remote water quality monitoring station that enables
real-time analysis of water courses from any global location. The integration of
state-of-the-art telemetry with proven sensor technology provides a system that
can be installed and then monitored remotely via an internet connection.
The ecology of the world’s water courses is finely balanced; temperature,
oxygen levels and conductivity are all inter-related. Pollution can alter these
parameters and destabilise the system with potentially devastating effects.
Routine monitoring is essential to observe changes and react quickly. With
Trace2o’s low cost Paqua-Stat this can be achieved.
The Paqua-Stat uses the Quad-band GSM / GPRS network to transmit realtime data to a secure web location accessible via a user log-in. Graphical
interpretation of the data illustrates immediately any water quality parameters
that have gone out-of-range. Alarm levels can also be set such that these
results will trigger a text message to be sent to the site manager or engineer.
In a situation where GSM coverage is not available, radio telemetry options are
available to expand the range to a 15km radius of the GSM hub.
The Paqua-Stat’s modular design enables customer configurable options with
the ability to add flow cells, different sensors, different power options (e.g. solar
panel), and to connect with other existing equipment, such as weather stations.
• Modular design
• Remote water quality monitoring, reducing the requirements for site visits
• 15km range with no GSM coverage
• Messaging system to alert user to error conditions
• Compact design for borehole, deep water and other course sampling
• Live result feed from site to local PC
• Low maintenance
• Up to 17 parameters can be measured simultaneously
(dependent on combination of probes)
Manufactured from marine grade aluminium, the probe housing will survive for
years even in the harshest environment. The majority of the probes should not
require replacement and are sealed into the housing, which is epoxy-filled. This
guarantees a 100% watertight unit that can be submerged indefinitely in the flow
cell.
The probes are designed to be anti-fouling but should maintenance be required
the probe can be quickly removed from the flow cell for inspection.
The optional Trace2o calibration meter allows for simple and fast recalibration in
the field.
[email protected]
Telephone: +44 (0)1635 872 929
Sampling occurs
automatically
Insert pump into water
Telemetry system
transmits results to
analysis centre
Range
Resolution
Optical
Range
Resolution
-5 to +50°C
0.1°C
Turbidity
0-3000NTU
0.01NTU
pH
0 - 14
0.01
Chlorophyll
0-500ppb
0.1ppb
Conductivity
0-100mS
1µS
Blue-green algae
0-300,000cells/ml
1cell / ml
Resistivity
5-1000Ωcm
1Ωcm
Rhodamine WT dye 0-500ppb
0.1ppb
Salinity
0-70ppt
0.01ppt
Fluorescein dye
0-500ppb
0.1ppb
DO
0-50mg/l
0.01mg/l
Refined oil
0-10,000ppb
0.1ppb
ORP
±2000mV
0.1mV
TDS
0-100,000ppm
1ppm
SSG
0-5
0.1
Ionic
Range
Resolution
t
t
0.01ppm
0-1000ppm
0.01ppm
F-
0-1000ppm
0.01ppm
NO3-
0-1000ppm
0.01ppm
Ca2+
0-1000ppm
0.01ppm
Air Quality
Monitoring
0-1000ppm
Air / Dust
Sampling &
Monitoring
NH4 / NH3
Cl-
+
Noise &
Vibration
Monitoring
Note:
Telephone: +44 (0)1635 872 929
[email protected]
Training
Description
Paqua-Stat Multi-parameter Remote Water Quality Monitoring Station(Standard System) Complete System, comprising
Base Unit with Submersible Pump (18m head), Flow Cell, Telemetry Processing Unit, all connection tubing, Water
Quality Probe with sensors for measuring the following parameters: Temperature, pH, Conductivity, Resistivity, Salinity,
Dissolved Oxygen, ORP, TDS, SSG, and Turbidity, supplied with Lockable Cabinet, Solar Panel ( 85W with control unit
and 6.4m mast), sealed 80Ah battery, Calibration Meter, Accessories Kit Box and all required fixtures and fittings.
Mobile
Laboratories
Catalogue No
Laboratory
Analytical
Equipment
For NON standard bespoke
Paquastat systems, requiring
any of the above sensors and
other communication options
to suit end user and on-site
requirements, please contact
Wagtech Projects.
EN16-500
Toxic Gas
Detection
General
Temperature
Meteorology
Specification of Sensors
Soil /
Sediment
Testing
Analysis
Install Paqua-Stat by
water course
54
Hydrology &
Groundwater
In any water resources assessment study, long
term measurements of water quality, flow, level,
and depth are crucial to produce accurate data for
later processing andanalysis.
This section contains a comprehensive range of
equipment that is widely used for measuring and
recording such data.
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Sam- Hydrology & Water Quality
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Analytical Vibration Monitoring
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring Monitoring Detection
pling & & Groundwater
Equipment Monitoring
Monitoring
Equipment
Testing
Analysis
Analysis
55
[email protected]
Telephone: +44 (0)1635 872 929
EN26-104
Specification
Range, m/sec
0.1-6.1
Accuracy, m/sec
0.03
Operating temperature, °C
-20 to +70
Sensor type
Turbo-Prop propeller with magnetic pick-up
Datalogger
30 sets, min, max, avg
Weight, kg
4
Power
Internal batteries - approx 5 year life
Catalogue No
Description
EN26-102
Flow Master, pole length; 1 to 2m
EN26-104
Flow Master, pole length; 1.5 to 4.5m
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Monitoring Equipment
Equipment
Monitoring
Monitoring
• Highly accurate and low cost
• Lightweight, rugged, and reliable
• Debris shedding turbo-prop
• Rain-proof digital read-out
• Padded carrying case for easy storage
• Displays instantaneous and true average velocity
Toxic Gas
Detection
The Flow Master is a highly accurate low cost water velocity instrument for
measuring flows in open flow channels and partially filled pipes. The instrument
has been extensively used by water professionals for over 30 years. The Flow
Master consists of the protected Turbo Prop positive displacement sensor
coupled with the expandable probe handle to the digital readout display.
The water instrument is ideal for storm water run-off studies, sewer flow
measurements, measuring flows in rivers and streams, and also in monitoring
velocity in ditches and canals.
Meteorology
Flow Master
Soil /
Sediment
Testing
Analysis
Current Flow Monitoring
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
56
EN26-106
Flow Meters
Current Flow Meters are suitable for use in a wide variety of environments
ranging from major rivers to small streams, fresh and salt water or effluent.
Measurements can be made for river gauging, open channel flow, pollution
and hydrometric studies.
The Digital Display Unit (DDU) offers real time and averaged display of velocity
with data logging. Data can be downloaded to a PC via the RS232 interface
using the cable supplied. The DDU comes with an LCD display with optional
backlight sealed to IP65 and weighing less than 1 kg.
• Easy to use, robust, low maintenance design
• Reliable and accurate velocity readings
• Wide measurement range
• Calibrated in accordance with BS3680
Specification
Large Meter
Small Meter
Velocity range
0.03 to 10m/s
0.04 to 5m/s
Accuracy
± 1.5% reading above 0.15m/s
± 2.5% reading above 0.5m/s
±0.004m/s below 0.15m/s
± 0.001m/s below 0.5m/s
125mm dia. by 0.27m pitch
50mm dia. by 0.10m pitch
Impeller
Materials
Motor body
Black Acetal
Impeller
High Impact Styrene
Impeller shaft
Stainless Steel on Jewelled Bearing
Catalogue No
Description
EN26-106
Large Current Flow Meter - Wading set,
Large Flow Meter, Digital Display Unit, 3 x 0.5m stainless steel wading
rods, complete with base plate, direction knob, 2m cable, carrying case
and operation manual.
EN26-108
Large Current Flow Meter - Suspension Set
Large Flow Meter, suspension bar digital display unit, 35m suspension
cable, carrying case and operation manual.
EN26-110
Small Current Flow Meter - Wading set,
Small Flow Meter, Digital Display Unit, 3 x 0.5m stainless steel wading
rods, complete with base plate, direction knob, 2m cable, carrying case
and operation manual.
EN26-112
Small Current Flow Meter - Suspension Set
Small Flow Meter, suspension bar digital display unit, 35m suspension
cable, carrying case and operation manual.
EN26-110
EN26-106
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
57
[email protected]
Telephone: +44 (0)1635 872 929
This small electromagnetic flow meter has been designed specifically for use
in open channels where fouling by weed or sewage can be a problem. A high
precision instrument which can be relied upon to give accurate readings (±0.5%
of reading plus zero stability) over a wide flow range (±5 m/sec) in only 5cm of
water. The control display unit provides a choice of averaging modes, standard
deviation of the data, and a logging facility for recording up to 999 averaged
readings.
EN26-114
Two sensor types are available, to suit different application requirements. One
for measuring speeds in water depths of 15cm or more, and one for 5cm or
more.
Both offer excellent durability, reliable accurate data, and are suitable for use in
clean water and dirty or difficult environments.
Specification
Cylindrical Type
-5m/s to +5m/s
Flat Type
±0.5% of reading plus 5mm/s
±0.5% of reading plus 5mm/s
±0.004m/s below 0.15m/s
Sphere of approx 12cm diameter
around sensor
<5mm/s
Sensing Volume
Minimum Depth
15cm
5cm
Range
-5m/s to +5m/s
Toxic Gas
Detection
Accuracy
Zero Drift
Meteorology
Both instruments are calibrated to NAMAS traceable standards for speeds up to
1m/s.
Supplied with: 3m cable, control display unit (with logging facility), wading rod
set c/w 3 x 0.5m graduated rods, base, direction knob and operation manual.
Supplied complete in large carrying case.
Soil /
Sediment
Testing
Analysis
Electromagnetic Flow Meters
Cylinder of approx 20mm Ø x 10mm
high
Display Unit
25 x 16 x 10 / 2
Environmental
Power
Sealed to IP67
8 x alkaline C cells, lasting for up to 37 hours
Operating Temp
-5°C to +50°C (display unit) -5°C to + 40°C (sensor)
Wading Set
Dimensions, cm /
weight, kg
62 x 42 x 34, / 9
Catalogue No
Description
EN26-114
Electromagnetic Flow Meter Wading Set with single axis cylindrical
sensor (water depths of 15cm or more),
EN26-116
Electromagnetic Flow Meter Wading Set with single axis flat sensor
(water depths of 5cm or more),
EN26-116
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Dimensions, cm /
Weight, kg
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
58
Water Level Monitoring
Water level measurements form the basis of
hydrological soil examination (porosity of the
soil, determination of the current direction of the
groundwater etc.)
Several widely used systems are displayed here that
allow for the recording of water levels in applications
such as in bore holes, casing tubes, well pipes,
water wells, open water, and tanks.
EN26-118
Portable Echo Sounder
The Portable Echo Sounder is a low cost single beam water depth instrument,
which is used by surveyors engaged in river, lake and inshore hydrographic
surveying. The instrument can be used as a conventional echo sounder with
depth data output via a RS232 serial port. The unit is sold as a complete package
and includes transducer, leads internal battery charger and a heavy duty carrying
case
• Measures water depths down to 75m.
• Light weight and easy to use in a small boat.
• Internal memory stores data for processing.
• Graphic LCD display shows depth data continuously.
• Can be connected to separate GPS equipment if required.
Specification
Transducer
Frequency
Beam Spread
200 KHz
Depth Range
0.30m to 75m (software limited)
Accuracy
±0.025m (RMS)
Power
10 V x 1.5 AH Internal Nickel Hydride sealed battery (NIMH)
Battery Life
8-12 hrs between charges
Standby battery life
10,000 hrs
Temperature range
0-45˚C
Overall Dimensions, mm
100 x 220 x 45
Unit Box Weight, Kg
0.75
Catalogue No
Description
EN26-118
Supplied complete with boat transom mount active
transducer, software package, serial data lead, battery charger and a
rugged carrying case.
8-10 degrees
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
59
[email protected]
Telephone: +44 (0)1635 872 929
EN26-120
A Water Level Monitor consisting of a datalogger with a submersible pressure
transducer for remote monitoring and recording of water level, flow and
pressure data. Constructed with an acrylic coat to protect the electronics from
condensation. This water testing instrument is easy to use and install, and can
be used in various applications such as groundwater monitoring, irrigation
canals, wetlands, infiltration / inflow studies and many more.
• Water level logger records over 81,000 readings
• Measures water depth down to 150m
• Accurate water level measurements ranging from 1m to 76m
• Automatic barometric pressure and temperature compensation
Data Logger
Non-volatile flash memory
Battery life
Up to 1 year
Resolution
12 bit
0-95% non-condensing
81,759 time and date stamped data points
Enclosure, mm
48 x 292, weather resistant cylindrical enclosure
Weight, kg
0.7 (inc battery and cable)
Communication
USB
Toxic Gas
Detection
Humidity
Storage capacity
Meteorology
Memory
Pressure Transducer
Accuracy
±0.1% of full scale at constant temperature, ±0.2%
Material
Stainless steel housing and microscreen
Cable
Standard 7.5m (other lengths available up to 150m)
Catalogue No
Description
EN26-120
Water level Monitor: Supplied with datalogger, housed
in a Weatherproof cylindrical enclosure, pressure sensor,
PC software, 7.5m of cable and 9Vdc battery
EN26-122
Extra cable lengths per metre, up to 150 metres
Surface Water Installation
Groundwater Installation
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Length
Soil /
Sediment
Testing
Analysis
Water Level Monitor
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
60
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
61
Water Level Logger & Sensor
Water Level Logger Kits
These water level data loggers offer high accuracy at an affordable price,
with no cumbersome vent tubes or desiccants to maintain. They are ideal for
recording water levels and temperatures in shallow wells, streams, lakes and
freshwater wetlands.
Water Level Logger Kit
• Available in 4 depth ranges
• No-vent-tube design for easy and reliable deployment
• Durable ceramic pressure sensor for reliable performance
• Memory: 21,700 combined pressure and temperature measurements
• Sample rate: 1 second to 18 hours, fixed or multiple-rate up to 8 userdefined sampling intervals
• Battery life: 5 years (typical) — factory-replaceable
• Fully-sealed housing ensures many years of trouble-free operation.
• Suitable for deployment in water or air; case materials resistant to fuels,
solvents and lubricants.
• Calibration certificate included
Includes calibration certificate of accuracy in accordance with NIST-traceable
standards at three pressure points distributed throughout the range.
Water Level Logger Specification
Range
Factory Calibrated
Range (0° to 40° C)
0-4 m
0-9 m
0-30 m
69 to 145 kPa
69 to 207 kPa
69 to 400 kPa
±0.3 cm
±0.5 cm
±1.5 cm
Water Level Accuracy
(Typical Error)
Resolution
Burst Pressure
0.14 cm
0.21 cm
0.41 cm
310 kPa
18 m depth
310 kPa
18 m depth
500 kPa
40.8 m depth
Waterproof Shuttle
• Can be used either as a data shuttle or an Optic USB Base Station
• Supports all Optic USB loggers
• Outdoor or underwater data readout
• Convenient direct USB connection to host computer
• Waterproof to 20 m
• Checks and indicates its own battery status
Specification
4 MB non-volatile memory
Up to 63 loggers
Operating temperature range
0° to 50°C
Battery life
1-year (typical) - user-replaceable
Software
Pro software
Dimensions, cm / Weight, g
15.2 x 4.8 / 150
Base Station
• Provides fast optical infrared (IR) communications for easy launch and read
out of all Pendant loggers
• Connects via USB cable to host computer while Coupler attaches the logger
to Base Station
• Splash-resistant
Specification
Operating temperature range
Range 0° to 50° C
Cable length
180 cm
Offloads full 64K logger
30 Seconds
[email protected]
Telephone: +44 (0)1635 872 929
Optional additional
logger for
barometer
pressure
compensation
Suspension
cable
Ground level
Carrying Case
Dimensions, cm
40 x 25 x 5
Weight, kg
3
Toxic Gas
Detection
Specification
EN26-124
EN26-126
EN26-128
Logger Range
One logger
0-4m
Kit includes
two 0-4m
loggers
One logger
0-9m
EN26-130
Communications
Base station
Waterproof
shuttle
Base Station
Not included
Included
Not included
Kit includes
one 0-4m and
one 0-9m
logger
Waterproof
shuttle
Included
EN26-132
EN25-134
One logger
0-30m
Kits includes
one 0-4m and
one 0-30m
Base Station
Waterproof
shuttle
Not included
Included
Included
Software
Stainless steel
Logger Housing
Dipmeter
EN26-138
This range of dipmeters are robust, light and convenient in use, and are all fitted
with an extremely strong tape marked in metres and centimetres. The tape is
wound on a plastic coated metal carrying frame.
Powered by a 9V PP3 battery, the dipmeters produce an amplified audio signal
(buzzer) when the probe contacts a water surface.
• Shrouded probe, stainless steel, 15mm diameter x 175mm length
• Lightweight and durable
• Reinforced flat tape with close interval markings
• Variable sensitivity control
Length of tape
EN26-136
20m
EN26-138
50m
EN26-140
100m
EN26-142
150m
EN26-144
200m
Training
Training
Catalogue No
* Longer lengths available on request
Telephone: +44 (0)1635 872 929
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Water Level Logger Kits
Catalogue No
Carrying Case
Meteorology
Water level
Soil /
Sediment
Testing
Analysis
Water Level Logger Kit
[email protected]
62
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
63
Geophysical Testing
Geophysical techniques are widely
used in remote regions of the
world where groundwater records
may be non-existent to locate and
map underground water resources.
EN26-146
Earth Resistivity Kit
This Earth Resistivity Meter provides excellent and reliable performance in a
convenient, robust and fully portable design. Ideally suited for subsoil
groundwater prospecting at shallow, medium and great depth, it can also be
used for geological stratigraphy, studies of salt water contamination in fresh
water layers, landslide monitoring, mineral exploration and archaeological
research.
• Creation of energetic wave based upon the parameters supplied by the user
• Fast downloading of data through RS232
• Easy to operate menu for quick learning
• More than 50 hours of battery life
• Automatic calibration at every switch-on
• Light and compact structure in a sturdy weatherproof case
Earth Resistivity Kit comprises of the following:
• Earth Resistivity measuring unit
• Cable reel with 300m cable (section 1mm) x 2
• Cable reel with 100m cable (section 1mm) x 2
• Rechargeable accumulator (200V, 500mA) x 2
• Copper electrode x 2
• Inox steel electrode x 2
• 1.25kg Mallet x 2
Specification
Energization Curve
May be customised to suit the following parameters:
Positive and negative wave length:
0.1 - 9.9 seconds (impl. at 25 seconds)
Time between positive and negative wave:
0.1 - 9.9 seconds
Intercycle time: 1 - 99 seconds
Number of cycles: 1 - 99
Resolution
610 nV, 126, 8nA
Number of readouts per wave
3 readouts of voltage and 3 readouts of current,
consecutively and at wave term
Voltage range for VMN
From +/-20mV to +/-1280 V (automatically selected)
Memory
Up to 1500 measures
Recommended energiser
600V (1200V peak-peak), 0.5A max
Noise suppression
Superior to 98 db at 50-60 Hz
Power supply
2x internal rechargeable battery 6V - 4A/h
0 - 60°C
Physical dimensions, cm
38 x 27 x 15 (shock proof case)
Weight, kg
7
Catalogue No
Description
EN26-146
Earth Resistivity Kit
[email protected]
Telephone: +44 (0)1635 872 929
Soil /
Sediment
Testing
Analysis
Water Sampling
EN26-152
The Van Dorn Water Sampler is designed for vertical and horizontal deployment,
and is ideally suited for use in marine or fresh water environments. The device
has no internal metal parts, making it suitable for obtaining samples for heavy
metal analysis and a clear acrylic body enabling a clear visual inspection of the
sample. Weight 5Kg
EN26-148
Vertical Style, Capacity 1000ml
EN26-150
Vertical Style, Capacity 2000ml
EN26-152
Horizontal Style, Capacity 1000ml
EN26-154
Horizontal Style, Capacity 2000ml
Water Sampler Field Kit
EN26-156
This water sampler field kit is ideal for water sampling at any depth zooplankton
collection, and secchi disc transparency measurements.
The kit is supplied complete with, clear polycarbonate 1.0 litre vertical water
sampler, 200g messenger, 20cm limnological secchi discs; armoured
thermometer(liquid spirit filled,-5˚C to 40˚C in 0.5˚ graduations); student
plankton net (20cm diameter x 60cm length x 153µm); three calibrated lines
with 0.5m graduations, line reels, plastic carrying case, and instructions.
Catalogue No
Description
EN26-156
Water Sampler Field Kit
Combined Water Sampling & Measurement Kit
The Combined Water Sampling and Measurement Kit is ideal for collecting
water samples, bottom sediment samples, plankton samples, measuring
turbidity, temperature and colour. Lightweight and compact for easy transport and
simple to operate without extensive training.
EN26-158
The kit is supplied complete with a Dissolved Oxygen water sample bottle, a
bottom sampling dredge, a secchi disc, a sounding lead and calibrated line, a
plankton net, a colour scale, and armoured thermometer (-5˚C to 50˚C in 0.5˚
graduations). All packed in a 350mm x 180mm foam-lined carrying case.
Catalogue No
Description
EN26-158
Combined Water Sampling & Measurment Kit
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Description
Toxic Gas
Detection
Catalogue No
Meteorology
Van Dorn Water Sampler
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
64
EN26-160
EN26-166
EN26-166
Tube Water Samplers
Catalogue No
Description
EN26-160
Water sampler, stainless steel, 250ml, 32mm o.d. 20m fibre tape
EN26-162
Water sampler, stainless steel, 1000ml, 45mm o.d
EN26-164
Rope with hook eye for use with EN26-162
Stainless Steel Bacon Sampler
Used to collect liquid samples from the top, bottom, or any intermediate level
of storage tanks, tank cars, ponds, lagoons, and wells. A suspension cable
(not included) may be used to lower the sampler to the desired depth. A
second cable attached to the plunger assembly is pulled, allowing the reservoir
chamber to fill. Releasing the cable allows the plunger to seal, holding the
sample inside.
Sampler is 63mm dia. X 280mm and holds 500 ml.
Catalogue No
Description
EN26-166
Bacon Sampler, stainless steel, capacity 500ml
EN26-168
Standard Heavy Puty Hand Reel made from P.P.
EN26-169
Cable - PTFE coated stainless. 25m
Water Sampling Pump
Ideal for removing samples from shallow wells and surface water sources,
including lakes, ponds, and holding pools. The water sampler is lightweight,
rugged, easy to use, weather resistant, and requires minimal maintenance.
Designed to take a manual sample, it also has the ability to backflush the
sample hose once a sample has been taken. To provide high sample integrity,
the water sample never comes in contact with any water sampler components
other than the norprene and polyethylene tubing. The tubing is easy to clean
and replace. To avoid cross-contamination or lengthy decontamination
procedures, simply change the inexpensive tubing between samples.
EN26-170
Includes a 3m power cord that can be attached to a 12V (car battery) power
source.
Specification
Flow Rate
1000 ml per minute at 1.2m head
Maximuim Lift
6.7m
Pump Tube
Norprene 6mm ID
Sample Hose
4.6 m nylon reinforced polyethylene tubing with intake strainer
Enclosure
Expanded UV protected PVC
Dimensions, cm /
Weight, kg
23 x 19 x 11.5 / 2.7
Catalogue No
Description
EN26-170
Water Sampling Peristaltic Pump, includes tubing and 3m power cord
EN26-172
Polyethylene Tubing (Per M)
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
65
[email protected]
Telephone: +44 (0)1635 872 929
EN26-174
The Automatic Water Sampler is designed specifically to meet the sampling
requirements for industrial discharges into sewers, rivers and streams. The
sampler takes a ‘time weighted composite sample in a 10 litre bottle, to meet
wastewater sampling guidelines The instrument can be easily set up near rivers
and streams and also be suspended in a manhole for sewer sampling.
• Simple to operate no programming required.
• Timed and external flow pulsed composite samples.
• Adjustable and repeatable sample volume.
• Re-chargeable battery or AC powered.
• lightweight and easy to carry.
• Peristaltic pump prevents sample contamination.
Specification
25ml to 600ml as set by user
Operating
Temperature
0-70˚C
Materials
Expanded UV protected by PVC
Enclosure Bottle
10 litre polyethylene
Flow Rate
1000ml per minute at 1.2m head
Toxic Gas
Detection
Type
Meteorology
Sample Size
Composite
Soil /
Sediment
Testing
Analysis
Automatic Water Sampler
Peristaltic
6.7m
Logic Timer /
Controller
CMOS solid state
Sample Hose
One 4.5m nylon reinforced 6mm ID polyethylene flexible tubing
sections with intake strainer. Hose may be extended as required,
using standard 6mm tubing and fittings
Battery Life
Battery will power sampler for a minimum of four months inc: five
24hr storm events before recharge required. Re-chargeable 5 AH
gel Cell battery
Dimensions, mm
230 x 430 x 560
Weight, kg
10
Catalogue No
Description
EN26-174
Automatic Water Sampler; supplied complete with a rugged rainproof
lockable carrying case, 10 litre polyethylene sample bottle for composite
sample,one peristaltic sampling pump, a control panel enclosed logic
timer / controller, one 4.5m sample pickup hose with removable debris
strainer, rechargeable battery and a battery charger.
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Maximum Lift
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
66
Soil / Sediment
Sampling &
Analysis
Soil that is contaminated contains substances that are actually or
potentially hazardous to health or the environment. Current or previous
industrial production can lead to land becoming contaminated by
human activities such as mining, industry, chemical and oil spills and
waste disposal. Contamination can also occur naturally as result of the
geology of the area, or through agricultural use.
Contaminated sediment in water bodies has emerged as a major
ecological and human health issue and can be associated with acute
and chronic effects on aquatic life. Sediments also constitute a major
source of persistent bio-accumulative toxic chemicals which may pose
threats to ecological and human health even after the pollutants cease
to be released.
Training
Training
Analysis
Soil/
SediSoil
/
Soil
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sediment
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
pling & &
Sampling
& Groundwater
Monitoring
Equipment
Testing
Analysis
Analysis
Soil/ Sediment Sampling & Analysis
67
[email protected]
Telephone: +44 (0)1635 872 929
Soil /
Sediment
Testing
Analysis
Soil Sampling
Meteorology
Soil Survey Kit
A self contained soil survey kit comprising a comprehensive range of specialist
equipment, that is designed to provide the soils specialist with all the
equipment required for soil sampling, classification, basic chemical analysis,
and soil compaction.
Description
EN32-102
Soil Survey Kit
EN32-102
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Catalogue No
Toxic Gas
Detection
• Hand held GPS
• 50m measuring tape
• Dutch and Riverside hand auger kits,
55mm and 75mm diameter, depth to 6m
• Surface soil sampler
• Soil colour charts
• Soil texture kit
• Range of soil sieves
• Pocket soil Penetrometer
• Soil analysis kit for NPK
• Field handbook
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
68
Hand Auger Kits
Driving Handle
A comprehensive set for augering all types of soil down to a depth of 8-10
metres. These kits are specifically designed for use in soil research studies
and are made to a high standard to ensure a long service life.
Clip-on connection: The advantage of the clip-on connection is that it is very
fast with little weight. The clip-on connection is strong, rigid and long lasting
Cliip on rod
Coupling
Hand Auger Kit consisting of:
• 6 x 1 metre clip-on rods
• 1 x Driving Handle
• 2 x Dutch Hand Augers S/L (55mm and 75mm diameter)
• 7 x Slide Tubes for clip-on rods
• 1 x Short tube for clip-on rods
• 1 x Solid clip-on adapter for driving handle
Screw thread connection: This connection is
based on male and female thread on the parts
to be coupled. The use of tapered threads for
connection allows you to simply hand tighten
the connection to create a rigid construction.
Hand Auger Kit consisting of:
• 6 x 1 metre Auger rods
• 1 x Driving Handle
• 2 x Dutch Hand Augers S/L
(55mm and 75mm diameter)
• 5 x Couplings
Catalogue No
Description
EN32-104
Hand Auger Kit: depth 6m, 55 and 75 mm dia.Clip-on
EN32-106
Hand Auger Kit: depth 6m, 55 and 75 mm dia. Screw thread
Riverside Hand Augers
Dutch Hand Auger
A range of riverside hand augers designed for soil investigations and
explorations. The design is very suitable for augering in hard, stiff soils, mixed
with fine gravel both above and below the ground water level. The very sharp
extremities of the auger bits point at an angle downwards, thus enabling the
auger to pass through soil with minimal difficulty.
The augers are plated against corrosion to ensure a long life.
Catalogue No
Description
EN32-108
Hand auger with handle and T-piece, 80mm dia. x 1m long
EN32-110
EN32-112
EN32-114
Extension Rod, 1m length
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
69
[email protected]
Telephone: +44 (0)1635 872 929
EN32-116
Used to obtain field samples of compacted ground or undisturbed soils, in
order for an evaluation of density compaction at the ground surface to be
undertaken. The set consists of a drop hammer which slides on the drive rod
and falls on the drive head where the sampling tube is held.
Catalogue No
Description
EN32-116
Surface soil sampler with sampling tube 73mm diam.
5kg drop hammer
EN32-118
Surface soil sampler with sampling tube 100mm diam.
10kg drop hammer
EN32-120
Sampling tube, 73mm diameter
EN32-122
Sampling tube, 100mm diameter
Soil Sampler
Description
EN32-124
Soil Sampler, T-handle with extension rod, 38mm dia.
900mm long
EN32-126
Spare stainless steel sample tube, diameter 38 x 230mm
EN32-128
Hand extruder used to extract specimens from the sample tube
Toxic Gas
Detection
Catalogue No
EN32-124
Soil Prospecting Kit
Catalogue No
Description
EN32-130
Soil Prospecting Kit
• Clay Core Tube
• Core Tube Adaptor
• Spiral Auger Tool
• Lifting Tool
• Prospecting Hammer
• Hammer and Tommy Bar
EN32-130
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
A complete set of soil prospecting equipment contained within a tough, durable
and fully portable carrying case make this the ideal kit for soil prospecting
applications in field studies. Maximum depth of 15 metres, subject to soil type
for sample sizes of 25mm diameter.
The kit comprises the following items:
• 10 x 1 metre long Boring Rods
• 2 x Driving Points • 12 x Couplings • Driving Head • Core Tube • Clearing Rod
• 2 x Wrenches
Meteorology
Used to obtain undisturbed soil samples of diameter 38mm. The set consists
of a T-handle with a 900mm extension rod, and a stainless steel tube, diameter
of 38 x 230mm. The unit has a total weight of 7kg.
Soil /
Sediment
Testing
Analysis
Surface Soil Sampler / Core Cutter
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
70
EN32-132
Soil Recovery Probes & Liners
These top quality probes are made of high grade alloy tubing with chrome
plating or durable stainless steel and can be used with or without liners. Each
probe is supplied with a cross handle, 25mm dia x 300mm long plastic liner,
and two end caps.
Catalogue No
Description
EN32-132
Soil Recovery Probe and liner, 28mm dia
EN32-134
Plastic Liner for Soil Recovery Probe, 25mm dia x 300mm
EN32-136
Plastic End Caps for liners, 25mm dia (pkt of 100)
Soil Colour Chart
EN32-138
The Munsell Soil Chart is an affordable way to evaluate the type of soil that is
present in a given area, the book is set up to allow users to make soil colour
evaluations in the field quickly and easily. Practitioners from a wide range of
professions can share reliable and consistent information about the colour of
soils at a particular site with collagues anywhere around the world.
Catalogue No
Description
EN32-138
Soil colour chart. Complete with supplementary tropical
soil charts
Environmental Soil Sampling Kit
These kits are used for sampling in soils where there is potential for
contamination below the ground surface. They use stainless steel components
that allow for easy decontamination. Samples can be collected, prepared, and
submitted for appropriate laboratory analysis.
Includes: Regular, sand and mud augers, cross handle, split soil core sampler,
slide hammer, three 1meter extensions, plastic liner, plastic end caps,
wrenches, and cleaning brush in a rugged, foam-padded hard-sided deluxe
carrying case with handles and wheels, 25 plastic liners, 50 plastic end caps,
50 fluoropolymer swatches for enhanced core sealing and a stainless steel
scoop.
Catalogue No
Description
EN32-140
Environmental Soil Sampling Kit
EN32-142
Replacement Plastic Liner, 50mm dia x 150mm long
EN32-144
Replacement Plastic End Cap for 50mm dia liner
EN32-140
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
71
[email protected]
Telephone: +44 (0)1635 872 929
EN32-146
Soil texture refers to the proportionate distribution of the different sizes of
mineral particles within a soil. Particles are grouped according to their size
into what are called ‘size separates’ (clay, silt, and sand). Soil separates are
a group of mineral particles that fit within definitive size limits expressed as
diameter in millimetres.
Included in this set, are three calibrated conical tubes with a stand, in addition
to dispersing reagent and flocculating reagent that work together to speed
settling of finely divided particles. Instructions explain method for breaking
down soil samples into sand, silt and clay fractions. “A Study of Soil Science”
provides background information on weathering and its relationship to soil
formation. Provides for 50 tests.
Catalogue No
Description
EN32-146
Soil texture kit.
EN32-148
Soil texture kit refill pack. Provides reagents for 50 tests
EN32-150
Catalogue No
Description
EN32-150
Agricultural soil sieve set
EN32-152
Supplied as a complete set comprising of a broad range of sieve sizes with a
lid and pan. 10 no sieves in the set with aperature sizes 2mm, 900mic, 600mic,
400mic, 250mic, 200mic, 140mic, 125mic, 100mic, 63mic. Pan diameter
100mm, pan height 45mm, body height 45mm.
Catalogue No
Description
EN32-152
Set of 10 soil sieves
Soil Sampling Bags
A pack of 500 plastic bags that are used for the submission of samples for
analytical assessment. The bags have a wire closure designed for sampling of
soils and other materials.
Specification
Dimensions, mm
75 x 125
Pack quantity
500 bags
Catalogue No
Description
EN32-154
Sampling Bags (pack of 500)
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Soil Sieve Set
Toxic Gas
Detection
Soil sieve set providing a fast and effective means for the coarser components
to be separated from a dry sample in order for preliminary analysis to be
undertaken on site. The Alloy nesting sieves are 125mm in diameter and have
round hole openings of sizes 0.5mm, 1mm, 2mm, 3mm and 5mm diameter.
With lid and receiver, weight 4kg.
Meteorology
Agricultural Soil Set
Soil /
Sediment
Testing
Analysis
Soil Texture Kit
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
72
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
73
Sediment Sampling
EN32-156
Sludge & Sediment Sampler Kit
This manually-driven, end-filling multi stage sampler is used for discrete interval
sludge and sediment sampling in rivers, lakes, wetlands, and estuaries.
Complete kit contains a multi-stage sludge sampler, multi-stage sludge core
tip, 30cm multi-stage core sampler base, three 30cm multi-stage core sampler
sections, three 120cm extensions, plastic liner, plastic end caps, 50mm soil core
catcher, universal slip wrench, two crescent wrenches, S / S cross handle, slide
hammer, and the deluxe carrying case.
Catalogue No
Description
EN32-156
Sludge and Sediment Sampler Kit, as described
EN32-158
Replacement Plastic Liner, 50mm dia, x 30cm long
EN32-160
EN32-162
EN32-164
EN32-166
Plastic End Caps for liners, 50mm dia
EN32-168
Hand Held Sludge & Sediment Sampler
This sampler has been specially designed to take samples of sediment and
sludge in rivers, wells, tanks, and shallow lakes etc.
• Simple to use
• Capacity of approx 250ml
• Auto snaps shut on contact with the sediment
• Spring loaded mechanism
• Use with the telescopic pole that extends up to 4.5m
Catalogue No
Description
EN32-168
Hand Held Sludge and Sediment Sampler, 250ml cap with 4.5m
telescopic rod.
EN32-169
Hand Held Sludge and Sediment Sampler extension rod length 4.5m
[email protected]
Telephone: +44 (0)1635 872 929
EN32-170
The Van Veen Bottom Sampler takes samples of sand or silt from river beds
and lakes. The sampler is lowered with the bucket jaws open, it is then retrieved
and raised to the surface by applying tension to the line which closes the two
buckets.
Specification
Material
Stainless steel
Sampling area, cm sq
250
Weight, kg
5
Catalogue No
Description
EN32-170
Van Veen Bottom Sampler; supplied complete with bridles
EN32-172
The Elkman Bottom Sampler is used for obtaining samples of sediments from
river beds, lakes and estuaries. The sampler is designed with hinged upper
doors which swing open when being lowered through the water A stainless steel
messenger is dropped down the line to close the dredge preventing washout of
the sample.
Stainless steel
Sampling area, cm
20 x 20
Weight, kg
10
Catalogue No
Description
EN32-172
Elkman Bottom Sampler
Sediment Core Sampler
Sediment Core Sampler collects samples from the bottom of rivers and lakes
Core samples of 50mm diameter can be obtained from depths of up to 125m
using an extension tube for retrieving samples in shallow water and a rope in
deep water.
Specification
EN32-174
Material
Stainless steel
Sampling area, cm
20 x 20
Weight, kg
10
Catalogue No
Description
EN32-174
Sediment Core Sampler
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Material
Toxic Gas
Detection
Specification
Meteorology
Elkman Bottom Sampler
Soil /
Sediment
Testing
Analysis
Van Veen Bottom Sampler
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
74
EN32-176
Surber Sampler
The Surber Sampler is used for sampling organisms in streams and shallow
rivers. Positioned with the 1000µm net down stream, the natural flow of water
causes the bag to remain open. Invertebrates are then collected into the fine
mesh net. When the open bottom frame is seated in pebbles on the stream bed
and detritus within the stream bed is disturbed, then concealed organisms are
swept into the net by the current of the water.
Specification
EN32-178
Sampling area, mm
305 x 305
Weight, kg
3.2
Catalogue No
Description
EN32-176
Surber Sampler
Hand Net
The Hand net is light and easy to use, and has been designed to overcome
problems such as warping and breaking. The frame is attached to a wooden
handle.
Specification
Material
EN32-180
Wooden handle, aluminum frame, Polyester netting
Width of frame, mm
250
Weight, kg
1.1
Catalogue No
Description
EN32-178
Hand Net
Plankton Nets
The Plankton Net is made from a strong nylon netting for durability and accuracy
with a tough nylon collar. The net is supplied complete with a brass frame and a
0.3mm PVC filter.
Includes a mini dolphin net / bottle adaptor with 125ml sample bottle. Available
in 3 sizes.
Specification
Material
Nylon
Aperature Size, mm
0.1
Net Diameter, mm
300
Overall Length, mm
900
Catalogue No
Description
EN32-180
Plankton Net 80 microns
EN32-182
EN32-184
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
75
[email protected]
Telephone: +44 (0)1635 872 929
EN32-186
This easy-to-use system provides rapid and accurate readings of suspended
solids, sludge blanket level, and turbidity. The robust IP65 enclosure
incorporates a security strap and protective case to prevent accidental
dropping, impact damage and abrasion of the display surface.
• Up to 10 different customer programmed calibrations allow for monitoring of multiple sites with one monitor
• Quick and easy measurement operations
Specification
Response time
0.5 seconds
Accuracy
±5% FSD on real sample
Repeatability
±1% FSD on real sample
Measurement Principle
Infrared Light Attenuation
Wavelength
880 nm
Pressure Rating
10mWC
Flow rate
Not affected by flow rate
Maximum range
0-20,000 mg/l
Minimum range
0-50 mg/l
Unites of measurement
Mg/l, g/l, ppm, NTU, FTU, %SS, User Defined
-20 to 60°C
Power
Universal charger 90-264 VAC, UK, US, and EU plugs.
Sensor dimensions (DxL)
45mm x 155mm
Meter+Sensor weight, kg
1.2
Kit dimensions, cm
45 x 15 x 30
Catalogue No
Description
EN32-186
Portable Suspended Solids Meter comprising Meter and Sensor with
5m cable housed in a protective carry case with strap.
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
• Compact robust design housed in a protective carry bag
Toxic Gas
Detection
The accuracy and convenience of this system make it ideal
for regular checking of suspended solids levels to process
or legislated requirements in activated sludge plants, final
effluent outfalls, treatment plant inlets, streams and rivers
and as a secondary standard to check other on-line and portable instruments.
Meteorology
The unit includes capability for up to ten customer
programmed user profiles, each defined by site specific
calibrations to cater for differences in the effluents being
monitored. A retrospective adjustment to the calibration
for each site is also possible via a unique menu facility that
enables a specific sensor output to be stored in memory at
the same time as a liquid sample is taken. The gravimetric
analysis of the suspended solids level in the sample is
then returned to the monitor as the final calibration figure.
Further site calibration enhancement is afforded by the
ten-point look up table that allows the monitor to accurately
measure suspended solids in vast majority of applications.
Soil /
Sediment
Testing
Analysis
Portable Suspended Solids Meter
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
76
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
77
Soil Moisture
& Analysis
EN32-188
Soil Moisture Meter
Solid state, electrical resistance sensor provides accurate readings from 0
to 200 centibars, covering the entire soil moisture range required in irrigated
agriculture. In operation, soil moisture is constantly being absorbed or released
from the sensor. Resistance is read by the hand-held digital meter and features
soil temperature compensation. Temperature scale can be adjusted to use
either °F or °C scales. Simple to use, just bury the sensor to desired depth,
connect alligator clips located on meter to the sensor, and view results on
digital display. Sensor is manufactured from non-corrosive parts and measures
22mm x 82mm. Accuracy: ±3%.
Catalogue No
Description
EN32-188
Digital soil moisture meter and sensor with 1.5m cable
EN32-190
Replacement sensor
Digital Soil Moisture, Temperature, and Salinity
Probes
EN32-192
Each meter is highly accurate, displays results within seconds, may be used
in a variety of soils, and is unaffected by temperature, pH, dissolved salts, or
metallic ions. Simply insert probe at least 15cm into reasonably soft, moist area
and press appropriate test button. Results appear quickly. Rapidly perform
multiple tests at various depths and locations. Operating temperature: 4ºC
to 65ºC. Power: 9V battery (included). Battery life (approx.): 3 months. Probe
length: 76cm. Overall length: 91cm. Weight (approx.): 2.5kg
Catalogue No
Soil Moisture
Soil Temperature
Salinity
EN32-192
EN32-194
EN32-196
Range
0 to 100%
0 to 100%
0 to 100%
Accuracy
±2%
±2%
±2%
Response Time
3 sec
3 sec
3 sec
Range
4ºC to 65ºC
4ºC to 65ºC
Accuracy
±1.5ºC
±1.5ºC
Response Time
60 sec
60 sec
Range
0 to 100 cS/m*
Accuracy in Water
±2 cS/m*
Accuracy in Soil
±10 cS/m*
Catalogue No
Description
EN32-192
Digital Soil Moisture Probe. Displays soil moisture percentage
EN32-194
Digital Soil Moisture and Temperature Meter. Displays both soil
moisture percentage and soil temperature
EN32-196
Digital Soil Moisture, Temperature and Salinity Meter. Displays soil
moisture percentage, soil temperature, and soil salinity
[email protected]
Telephone: +44 (0)1635 872 929
EN32-198
This pocket meter is designed to directly measure soil conductivity and
temperature. With a temperature sensor incorporated into the penetration
probe, readings are automatically temperature compensated. Conductivity
range can be calibrated in an aqueous solution with a single calibration point.
Specification
EC: 0.00 to 4.00 mS/cm; Temperature: 0.0 to 50.0˚C
Resolution
EC: 0.01mS/cm; Temperature: 0.1˚C
Accuracy
EC: +/-0.05 mS/cm (0.00 to 2.00mS/cm), +/-0.30 mS/cm
(2.00 to 4.00 mS/cm); Temperature: +/-1˚C
Calibration
Manual, 1point
Temperature
compensation
Automatic
Dimensions, mm
163 x 40 x 26
Weight, g
100
Catalogue No
Description
Pocket Conductivity and Temperature Meter, supplied complete
with penetration probe, batteries and instructions. It is highly
recommended a 1413uS solution is used to calibrate the meter (sold
separately).
EN32-198
1413 µs/cm (1.4 mS/cm) calibration solution, 500 mL
EN32-202
1413 µs/cm (1.4 mS/cm) calibration solution, 20 mL, 25 sachets
EN32-204
Direct Soil pH Measurement Kit
Specification
-2.00 to 16.00 pH
-5.0 to 105.0 °c
0.01 pH
0.1 °c
±0.02 pH
±0.5 °c up to 60 °c; ±1 °c outside
Range
Resolution
Accuracy (@20 °c)
Temperature
Compensation
pH Calibration
Electrode (included)
Automatic
Automatic 1 0r 2 point calibration with 2 sets of memorized buffers
(4.01, 7.01, 10.01 or 4.01, 6.86, 9.18)
pre amplified pH / temperature electrode with DIN connector and 1m
cable
Battery
Type (3) 1.2V AAA, life: 1500 hrs
Environment
0 to 50 ºC RH max. 100%
Dimensions, mm
150 x 58 x 29
205
Weight, g
Description
EN32-204
Direct Soil pH Measurement Kit
EN32-206
Replacement pH electrode for soil measurement, with internal temperature sensor, DIN connector on a 1m cable
EN32-208
Refill pack containing buffers and cleaning solutions
Telephone: +44 (0)1635 872 929
[email protected]
Training
Training
Catalogue No
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
The kit has been designed to measure pH directly in soil accurately and quickly.
Testing both the pH of soil directly or after preperation of a diluted sample.
The electrode has a conical, rugged tip and can be directly inserted in moist or
soft soil.
Use the specially made soil preparation solution for higher degrees of
accuracy, or for stony ground where the electrode may be damaged. This
solution is included to help you measure pH more precisely by diluting the soil
sample.
In order to measure the pH directly, the kit includes a plastic auger to perforate
the ground.
This hand held product has a large, multi-level LCD which displays the primary
reading, temperature and calibration guides simultaneously.
Complete kit includes meter, pH electrode, soil auger, soil preparation solution,
starter set of calibration solution sachets, 100ml plastic beaker, batteries,
instructions and carrying case.
Toxic Gas
Detection
EN32-200
Meteorology
Range
Soil /
Sediment
Testing
Analysis
Soil Conductivity & Temperature Meter
78
EN32-210
Soil Analysis Kit
This comprehensive soil analysis kit is designed for use by farmers,
horticulturalists, agronomists, scientists and consultants in the field or
laboratory and will enable a range of tests to be carried out at a fraction of the
cost of full scale laboratory analysis. Increased accuracy is ensured by the use
of digital meters and a photometer which, together with extraction and reagent
tablets for 50 tests, will measure the following parameters: pH, conductivity,
nitrate nitrogen, phosphate phosphorus, potassium, sulphate, iron, manganese,
copper, ammonia nitrogen, chloride, calcium, and magnesium - supplied in
carrying case.
EN32-300
Catalogue No
Description
EN32-210
Soil Analysis Kit including accessory pack
EN32-212
Refill soil extraction and reagent pack for Soil Analysis Kit, 50 tests
HM4000 Metalyser Heavy Metals Soils Analyser
Portable Analyser, incorporating innovative extraction and digestion equipment,
for easy detection of heavy metals in soil samples.
• Rapid in-field analysis
• Precise results to ppb levels
• Voltammetric technique
• User-friendly extraction and analysis
• Rugged, waterproof carrying case
• Consumables for 50 tests included
Catalogue No
Description
EN32-300
Metalyser HM4000 Instrument, Sonde with 2m cable, electrodes, 1
reference electrode, 1 counter electrode, beakers, mains charger, car
charger, USB cable, buffers, standards and conditioning solutions, soil
extraction kit, Metaware software and waterproof carry case.
Note:
For details of the full Metalyser range, please
refer to pages 15 to 18.
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
79
[email protected]
Telephone: +44 (0)1635 872 929
On site screening of heavy elements in soil provides remarkable savings on
laboratory costs. This portable analyser can be used in the most demanding
locations and provides fast and reliable analysis of all the heavy elements of
interest in soils. The results are available instantly so decisions can be made on
site. Pre-sorted contaminated soil enables you to minimize remediation costs
and landfill fees.
EN32-350
Toxic Gas
Detection
Air particles on filters, wipe test swabs, equipment surfaces, coatings,
vegetation etc can also be analysed.
Meteorology
• Preliminary screening reduces the amount of actual laboratory analysis needed – No need to wait for laboratory results!
• Sorting the contaminated soil means great savings in landfill fees decisions can be made in minutes instead of days
• Preliminary analysis of unknown samples at the beginning of the remediation process enables remarkable cost savings
• Instantly locate and identify polluting elements and define the extremities of ‘hotspots’
• Analysis can be done directly from the ground or from samples in sample bags or cups
• Laboratory quality analytical data is obtained by measuring prepared samples using the optional benchtop stand which quickly converts the handheld
analyser into a laboratory unit.
• Samples can be in the form of soil, rock, dirt, humus, sand, powder, liquid etc.
Soil /
Sediment
Testing
Analysis
Portable XRF Analyser for Screening Heavy
Metals in Soils
Specification
Pb, As, Cr, Cu, Zn, Ni, Cd, Co, Se, Mo, Hg, Sb, Ag, Ba etc
Measurement time
30 -120 second
Element range
K to U
Low detection limits
Can typically detect 5 – 30 ppm concentration with a 120s
measurement time. Measures all 26 elements defined in EPA6200
Real time averaging
Calculates averages of 2 – 50 measurements and saves individual
results and averaged results
IP Rating
IP54
Weight, Kg
1.8
Catalogu.e No
Description
EN32-350
Portable XRF Analyser for Screening Heavy Metals in Soils, supplied
complete with battery charger and carrying case
EN32-352
Bench Top Stand
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Heavy element analysis for
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
80
Hydrocarbons In Soils
EN32-400
Soil Test Kit for Total Petroleum Hydrocarbons
This kit will determine total petroleum hydrocarbons across a wide range of
soil types and petroleum products, and is ideal for use in the field. The system
enables the user to run 10 tests concurrently, providing the potential to run
25 tests in one hour. The kit can also be calibrated to measure quantitative
amounts of specific petroleum products including: BTEX, PAH, diesel fuel,
leaded and unleaded gasoline, brent crude, and lubricating oil. Self-filling
ampoules minimise operator exposure to the reagents and dramatically
reduce the volume of solvent needed for extraction, making the kit safe and
environmentally friendly.
Ranges (Expected dynamic range of the test in soil sample matrix).
Specification
Unleaded Gasoline
80-600 mg/kg
BTEX
16-140 mg/kg
Diesel
60-400 mg/kg
Leaded Gasoline
80-520 mg/kg
Brent Crude
40-400 mg/kg
Lube Oil
120-1000 mg/kg
PAH (18 component
mixture)
8-60 mg/kg
Both the Starter and Reagents Kits are required for operation.
Catalogue No
Description
EN32-400
Starter Kit includes Photometer, Electronic Balance, Timer, PTH Tube
Plug/Snapper, Tip Breaking Tool, Batteries, and instructions.
EN32-402
Reagents for conducting 16 tests, reagent blank ampoule and MSDS.
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
81
[email protected]
Telephone: +44 (0)1635 872 929
EN32-404
The Soil Gas Vapour Probe Kit system allows for monitoring or sampling
hydrocarbon spill sites, underground storage tanks and pipelines. The Probe
is used for sampling soil vapours to a depth of 3.5m, and has been designed
specifically for placement of devices used to recover soil gas samples.
Catalogue No
Description
EN32-404
Soil Gas Vapour Probe Kit with rotary hammer drill, 4 x 90cm extension
rods, tip drive adapter, extension drive and hammer drill adapter, 10
x GVP tips, 38mm diameter cement bit, hand vacuum pump, 75m roll
of Teflon tubing, manual hammer attachment, removal jack, tile probe
base, 3 x tile probe extensions, with carrying case and instructional
video.
Soil /
Sediment
Testing
Analysis
Soil Gas Vapour Probe Kit
Meteorology
Toxic Gas
Detection
EN32-406
This Portable VOC Detector is the most reliable handheld Volatile Organic
Compound (VOC) monitor on the market. Its Photoionization Detector’s (PID)
range of 0 to 5,000 ppm makes it an ideal instrument for applications ranging
from environmental to construction and in particular for use with the Soil Gas
Vapour Probe Kit.
The patented sensor provides the following unique features:
• Big graphic display for easy overview of concentration
• Range up to 5,000 ppm
• Integrated flashlight for better visibility in low light
• Multi-language support with 12 languages encoded
• Rugged housing withstands use in harsh environments IP-65 design
• Auto-cleaning technology
• Tough, flexible inlet Flexi-Probe™
• Loud, 95 dB audible alarm
• Bright red flashing visible alarm
• Soft leather carrying case
• Size (LxWxH) 25.5 x 7.6 x 6.4 cm, 738 grams
Catalogue No
Description
EN32-406
Portable VOC Detector
EN32-408
Portable VOC Detector accessories kit, comprising 5 x litres, Organic
Vapor Zeroing Kit, Gas Outlet Adapter, Hard carring case.
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Portable VOC Detector
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
82
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
83
EN32-416
Portable Landfill Gas Monitor
This landfill & contaminated land gas analyser is designed to meet landfill monitoring protocols for the following range of gas measurements Methane(CH4),
Carbon Dioxide (CO2), Oxygen(O2), Hydrogen Sulphide(H2S), Carbon Monoxide
(CO)
The instrument is ideally suited to landfill sites, gas extraction, site investigations, and biogas applications.
• CH4, CO2 and O2
• Additional sensors H2S, CO
• Simultaneous display of all gases
• Additional gases including H2S up to 10000ppm and H2 compensated CO
• Optional ATEX certified anemometer
• Additional Gas Analyser Manager software for data download
• View calibration history on the analyser screen
Specification
By dual wavelength infrared sensor
with reference channel
By internal electrochemical sensor
CO2 and CH4
Gases measured
O2
CO (hydrogen compensated),
H2S, NH3 and H2 (optional)
By internal electrochemical sensor
Oxygen cell life
Approximately 3 years in air Suitable for sampling applications - not for
continuous use
Range
CH4
CO2
O2
CO
H2S
0-100%
0-100%
0-25%
0-2,000ppm
0-50ppm up to 0-10,000ppm
Typical accuracy
after calibration
CH4
CO2
O2
CO
CO (H2)*
H2S
0-70%
0-60%
0-25%
0-500ppm
0-2,000ppm
0-50ppm
0-200ppm
0-500ppm
0-1,000ppm
0-5,000ppm
0-10,000ppm
Response time, T90
CH4
CO2
O2
CO
H2S
≤ 10 seconds
≤ 10 seconds
≤ 20 seconds
≤ 30 seconds
≤ 30 seconds
Hydrogen
(Gas Analyser
software required)
±0.5% (vol)
±0.5% (vol)
±1.0% (vol)
± 2.0% FS
± 1.0% FS
± 1.5% FS
± 2.0% FS
± 2.0% FS
± 2.0% FS
± 2.0% FS
± 5.0% FS
70-100%
60-100%
±1.5%
(vol)
Compensated for interference from up to 2,000ppm hydrogen. Hydrogen
cross gas effect on CO approximately 1%.
Pump
Flow
550 ml / min typically
Flow fail point
-200 mbar vacuum - user settable
Maximum vacuum
restart
-375 mbar approximately with flow rate of approximately 80ml/ min
Power Supply
Battery type
Rechargeable nickel metal hydride battery pack (not user replaceable)
Battery life
Typical use 8 hours from fully charged
Battery charger
Separate intelligent battery charger powered from mains supply (100-240V)
Charge time
Approximately 3 hours from complete discharge
Catalogue No
Description
EN32-416
Portable Landfill Gas Monitor
EN32-418
Gas Analyser Software
EN32-420
Temperature Probe
EN32-422
Anemometer Probe
EN32-424
Extra sensor H2S
EN32-426
Extra sensor CO
[email protected]
Telephone: +44 (0)1635 872 929
Soil /
Sediment
Testing
Analysis
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
This contains products made
by leading manufacturers certified to ISO 9001 quality standard, supplied and shipped to
your nominated destination.
Toxic Gas
Detection
A comprehensive range of
laboratory equipment can be
found in our Wagtech Projects
General Laboratory Equipment
Catalogue.
Meteorology
THE
LAB
CAT
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
84
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas Meteorology ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
Meteorology
85
Meteorology
A range of conventional and
high technology instruments
for measuring and recording
weather data
[email protected]
Telephone: +44 (0)1635 872 929
Meteorology
Automatic Weather Station
Accuracy
-20 to +70°C
0.2°C at 25°C
Relative Humidity
0 to 100% (-20 to 70°C)
+/- 2% max, typical 1% or better
Rain Gauge
Sensitivity 0.2mm / tip
Pyranometer
400 to 1100nm
+/- 5% max, typical 3% or better
Anemometer
> 75m/s
+/- 2%, +0.1m/s
Wind Direction Sensor
> 75m/s
+/- 2%
Catalogue No
Description
EN44-102
Automatic Weather Station comprises of multi-channel datalogger with
memory capacity for approximately 27,000 readings
Hydrological Monitoring Station
The Hydrological Station has been designed for use by farmers, hydrologists,
and researchers to collect data on local hydrological conditions. As with the
other monitoring stations, this is a lightweight unit that can easily be moved from
site to site if required.
The station comprises sensors for measuring wind speed, wind direction,
rainfall and water level (0 to 10 metres). Supplied complete with datalogger,
2 metre frame, solar charger unit, re-chargeable battery pack, and computer
software.
Catalogue No
Description
EN44-104
Hydrological Monitoring Station
Windspeed and Direction Monitor
Windspeed and Direction monitor comprising of a 2 channel
datalogger and wind speed and wind direction sensor mounted on a 2
metre mast.
Catalogue No
Description
EN44-106
Windspeed and Direction Monitor
Rain Monitoring System
Catalogue No
Description
EN44-108
Rain Monitoring System
Telephone: +44 (0)1635 872 929
[email protected]
Training
Training
Rain Monitoring System comprising Data Logger, Batteries, Standard Software,
RS232 Data Lead, Rain Gauge, and Base levelling Plate.
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Range
Air Temperature
Toxic Gas
Detection
Sensors
Meteorology
Comprising of 6 sensors for measuring all the key weather parameters;
wind speed, wind direction, air temperature, relative humidity, rainfall and
solar radiation.
An 8 channel datalogger is used to collect and store the data which can then
be retrieved using either the 2 metre RS 232 cable and a laptop pc on site, or
alternatively by using one of the remote connection options listed on page 88.
The unit is powered by internal alkaline batteries which, under normal use, will
last from 4 to 6 months. Supplied complete with data transfer software.
Soil /
Sediment
Testing
Analysis
Automatic
Weather Stations
86
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
Meteorology
87
Sensors
Our standard systems use the most common sensors. However, a wide range
of additional sensors are available for use with the weather station.
These include light sensors such as PAR quantum, UVA, UVB, as well as
tensiometers, soil moisture and water level. Please contact Wagtech Projects if
you require a non-standard weather station using these sensors.
Wind Direction & Wind Speed - EN44-110
Rainfall - EN44-114
Range
0 to 360°
Range
0.2mm per tip
Accuracy
Accuracy
±5% (24 to 36 mm/hr)
Maximum wind speed
±2° obtainable in steady winds over 5
m/s
>75 m/s
Range (speed)
0 to 75m/s
Range
-20 to + 80°C
Accuracy (speed)
2% ±0.1 m/s
Accuracy
±0.2°C at 0 to 60°C
Soil Temperature - EN44-116
Air Temperature & Relative Humidity - EN44-112
Solar Radiation - EN44-118
Range
Range
400 to 1100 nm
Accuracy
±5% traceable to UK Met Office
Accuracy
-20 to +70°C
±0.2°C between 0 and 60°C
Range
0 to 100% Relative Humidity
Air Pressure - EN44-120
Accuracy
±2% Relative Humidity
Range
500 to 1050 mbar
Accuracy
Absolute error at 20°C / 1000 mbar typically 0.5
mbar
(Max. 1mbar) Error over 0-50°C typically 1.5 mbar
(Max. 3.6 mbar)
Masts
Catalogue Number
Description
EN44-124
2m portable mast mounted on metal plate with guylines and pegs
EN44-126
10m retractable mast with guylines, base and pegs
Datalogger
Specification
Channels
Maximum of 16 available
Operating range
-20°C to +70°C
Housing
Grey ABS with seal to IP65
Communications
RS232C
Power supply
6 x C-cell alkaline batteries. These will last approximately
4 to 6 months
Memory capacity
1Mb RAM, total of up to 27000 readings
Catalogue No
Description
EN44-128
8 channel datalogger includes batteries, data downloading
software, RS232 data cable & USB / Serial converter
EN44-130
16 channel datalogger includes batteries, data downloading
software, RS232 data cable & USB / Serial converter
Note:
Software for Automatic Weather Stations see
following page.
[email protected]
Telephone: +44 (0)1635 872 929
Meteorology
Soil /
Sediment
Testing
Analysis
Communications and Computer Software*
for Automatic Weather Stations
The standard weather station is supplied with a 2m long RS232 communications
cable and standard downloading software.
A laptop computer is required to retrieve the data on site. Additional software is
available to display the data, build graphs and wind roses etc, and to monitor
the operation of up to 25 weather stations.
Other options include:
•Permanent cable link which is used with mains power supply, and the
communications from base to AWS distance no more than 50m
• Permanent cable link also uses the mains power supply and communication for distances up to 1km
•GSM modem unit is available in order to enable communication with the
station 24 hours a day using the local cell phone network
Laptop computer
EN44-134
Permanent cable link (with 25m cable)
EN44-136
Permanent cable link (with 75m cable)
EN44-138
GSM modem unit (requires solar power unit supply)
EN44-140
Solar power supply, for use with GSM modem
EN44-142
Deluxe software, for use with the standard datalogger to display
the weather data, build graphs etc
EN44-144
Deluxe Auto software, for use with up to 25 weather stations to
monitor and download data automatically
* Please contact us for alternative communications options.
Toxic Gas
Detection
Description
EN44-132
Meteorology
Catalogue No
Indoor / Outdoor Automatic Weather Station
This wireless weather station provides accurate, reliable weather monitoring in
a self-contained, easy-to-install system. The station gives you all the weather
data you need for use by small farms, and in education. Sleek but tough; your
outdoor sensor unit can be set up in minutes and starts sending data wirelessly
to your console anywhere in your school, or business. Current weather
conditions are displayed, including indoor and outdoor temperature, humidity,
barometric pressure, wind speed and direction, dew point and rainfall. Also
displayed are weather forecast icons, moon phase, sunrise / sunset times,
graphing of weather trends, alarms and more. The station boasts the innovative
Weather Centre button that displays additional data on weather variables for
today and over the last 25 days.
•Compact, self-contained and easy to install
•Combines a rain gauge, temperature / relative humidity sensor, an anemometer and wind vane into one package
• Transmits wirelessly up to 300 metres
•Includes console
Automatic Weather Station includes sensors for measuring wind speed, wind
direction, air temperature, relative humidity, barometric pressure and rainfall,
solar powered with lithium back up battery.
Catalogue No
Description
EN44-146
Indoor / Outdoor Automatic Weather Station
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
EN44-146
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
88
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
Meteorology
89
EN44-148
Automatic Weather Station
These Automatic Weather Stations are available in both wireless and cabled
versions. Both include innovative integrated sensor unit, which combines a rain
gauge, temperature and relative humidity sensors, anemometer and wind vane,
12 m anemometer cable, and solar panel. Electronic components are housed in
a weather-resistant shelter.
Console may be powered using the included AC-power adapter or with three C
batteries (not included).
Wireless range is up to 300 m outdoors, line of sight. Typical range through walls
under most conditions is 60 to 120 m.
•Forecasting, on-screen graphing and much more
•Quick view icons show the forecast at a glance while a moving ticker-tape display gives details
Specification
EN44-152
Accuracy
Wind Direction
360°
±3°
Speed:
3 to 241 km/h
±5%
Wind Chill:
-92° to 60°C
Humidity:
Inside: 0% to 100%
Outside: 0% to 100%
±2°C
±5%
±3%
Barometer:
480 to 820 mm Hg
±1.3 mm Hg
Temperature:
Inside: 0 to 60°C
Outside: -40° to 65.5°C
±0.5° C
±1° F, 0.5° C
Rainfall:
Daily: 0-6553 mm
Accumulation: 0-6553 mm
±4%
±4%
Time & Date:
12 or 24 Hour Clock, Time Alarm and Date
Catalogue No
Description
EN44-148
Automatic Weather Station (Cabled)
EN44-150
Automatic Weather Station (Wireless)
GPS Receiver
This GPS is a tough and rugged piece of equipment suited to all types of
terrain. It has a highly-sensitive WAAS / EGNOS-enabled receiver which holds a
GPS signal in the toughest conditions. It has a bright colour screen, barometric
altimeter, electronic compass, microSD and automatic routing.
• Power supply 2 x AA batteries
• 256 colour screen TFT
• USB compatible
• Rugged and weater proof case
• Water resistant to IEC-529, IPX7 standards
• 25 Hours battery life
• Store up to 50 routes, 1000 waypoints, 10,000 points and 20 saved tracks
Specification
Receiver
12 channel
GPS Antenna
Patch
Acquisition time
0:15 - 0:45
Accuracy
<15m
Internal memory
24MB
Number of waypoints
1000
Number of tracking plots
10000
Weight, g
156
Dimensions, mm
111 x 50 x 30
Catalogue No
Description
EN44-152
GPS receiver
[email protected]
Telephone: +44 (0)1635 872 929
Meteorology
Soil /
Sediment
Testing
Analysis
Manual Weather
Stations & Instruments
Meteorology
EN44-196
Specification
Air Temperature
Indoor Range: 0°C to 59.9°C
Outdoor Range: -39.9°C to 59.9°C
Reading: Indoor every 15 seconds / Outdoor every 4 seconds
Calibration: Can be calibrated
Temperature Resolution: 0.1°C
Transmission Frequency: 868 MHz
Memory: 24 hour
Wireless transmission distance: 100m open field
Time
Radio controlled
Display: 12 / 24 hours
Time zone: +/- 9 hours
Calendar with date / month
Dimensions, mm
Display: 136 (H) x 95 (W) x 19 (D)
Transmitter: 128 (H) x 41 (W) x 19 (D)
Battery
Type: 4 × 1.5v AA battery (included)
Life: Approx 12-18 months
Catalogue No
Description
EN44-196
Digital Wireless Indoor / Outdoor Thermometer
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Digital thermometer with simultaneous display of both current indoor and
outdoor air temperatures and the daily minimum and maximum. Can take up to
2 wireless receivers (1 included) and has a 3rd channel for a temperature probe
(included). Radio controlled clock synchronised with the atomic signal so the
time is always correct. Supplied with a pullout stand or can be wall mounted.
Toxic Gas
Detection
Digital Wireless Indoor / Outdoor Thermometer
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
90
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
Meteorology
91
Mercury Free Max / Min Thermometer
EN44-198
EN44-200
Traditional Max-Min design with a non mercury filling. Press button reset.
-40 to +50˚C
Suitable for wall hanging.
Catalogue No
Description
EN44-198
Mercury Free Max / Min Thermometer
Max / Min Slimline Thermometer
A simple low cost design with seperate resetting magnet. ˚C & ˚F.
-40 to +50˚C
Suitable for wall hanging.
Catalogue No
Description
EN44-200
Max / Min Slimline Thermometer
Electronic Max / Min Thermometer
EN44-202
Simultaneous monitoring of two environments. The thermometer has 2 sensors &
each sensor has its own readout. One sensor is inside the unit. The external sensor
has a 3 metre connection lead. The Min / Max Memory operates independently for
each sensor.
Specification
Range
-50° to +70°C, (External Sensor)
-10º to +50ºC, (Internal Sensor)
EN44-204
Resolution
0.1°C
Accuracy
±2°C
Power
1 x 1.5V AA Battery (ALR-6)
Dimensions, mm
135 x 75 x 18
Weight, g
117
Catalogue No
Description
EN44-202
Electronic Max / Min Thermometer
Compact Thermo-Hygrometer
A compact design for ease of use with an integrated vented sensor grill, which
enables measurements to be taken within an air stream. Sensing is by a precision
thermistor for temperature, and a resistive polymer sensor for humidity, giving fast
and repeatale readings.
• Measures ˚C or ˚F
• 25mm Hi-Contrast LCD with Backlight
• Data Hold freezes displayed measurements
• Min / Max Memory since power on
• Low Battery indication (flashing display)
• Auto Power Off
• Supplied with carry case & battery
Specification
Range
Temperature
Humidity
-20°C to +60°C
5% to 100% RH
Resolution
0.1°C
0.1% RH
Accuracy
±2°C
±3.5% RH
Power
1 x 9V PP3 Alkaline Battery (ALR-61)
Dimensions
225 x 45 x 34mm
Weight
200g
Catalogue No
Description
EN44-204
Compact Thermo-Hygrometer
[email protected]
Telephone: +44 (0)1635 872 929
Meteorology
EN44-206
A high accuracy combined humidity & air temperature meter with wet bulb
and dewpoint temperatures. Ideal for a wide range of industrial and laboratory
applications. Suitable for single handed operation.
• Dew Point & Wet Bulb temperatures displayed at the touch of a button
• LCD dual display with backlight
• Connected probe with 1.8m coiled cable
• Data Hold freezes displayed measurements
• Min / Max Memory for both temperature and humidity
• Impact-resistant ABS case with rubber boot and flip-out desk stand
Specification
Humidity
Dewpoint
Wet Bulb
-30° to 100°C
0 to 100% RH
-30° to 100°C
0° to 80°C
Resolution
0.1°C
0.1%RH
0.1°C
0.1°
±2%RH
±1.0°C
±1°C
±0.5°C
1 x 9V PP3 Alkaline Battery (ALR-61)
Dimensions, mm
155 x 72 x 35
Weight, g
210
Catalogue No
Description
EN44-206
High Accuracy Thermo-Hygrometer, supplied with carry bag & strap,
rubber boot and battery
Wet & Dry Bulb Hygrometer-Complete Kit
Toxic Gas
Detection
Accuracy
Power
Meteorology
Temperature
Range
EN44-208
Specification
-20 to 55˚C
Graduations
0.5˚C
Expected accuracy
+/- 0.1˚C
Medium
Mercury
Catalogue No
Description
EN44-208
Wet & Dry Bulb Hygrometer
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Consist of 2 Sheathed Pattern Ordinary Thermometers manufactured to BS692,
meeting BMO requirements, 4 thermometer brackets for mounting them in screen,
water reservoir with bracket, pack of 50 wicks and 10 round headed brass wood
screws.
Range
Soil /
Sediment
Testing
Analysis
High Accuracy Thermo-Hygrometer
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
92
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
Meteorology
93
EN44-210
Digital Temperature and Humidity Station
Indoor & outdoor digital thermometer and humidity station, with simultaneous
display of both temperature and humidity with minimum and maximum recordings
for the day. Outdoor reading from wireless sensor, and indoor display unit
supplied with pull out stand or can be wall mounted.
Specification
Temperature
Humidity
Time
Dimensions
Battery
EN44-212
Indoor Range: –9.9°C to 69.9°C
Outdoor Range: -29.9°C to 69.9°C
Calibration: Can be calibrated
Resolution: 0.1°C
Transmission Frequency: 868 MHz
Memory: 24 hour
Wireless Transmission Range: 100m open field
Indoor Range: 1% to 99%rh
Outdoor Range: 1% to 99%rh
Resolution: 1%
Accuracy : +/- 3%
Measure units: %rh
Radio controlled
Display: 12 or 24 hours
Time zone: +/- 9 hours
Calendar with date / month or day / date
Manual setting
Display: H 138 x W 106 x D 36mm
Transmitter: H 160 x W 43 x D 23mm
Type: 5 × 1.5v AA (included)
Life: Approx 12-18 months
Catalogue No
Description
EN44-210
Digital Temperature and Humidity Station
Digital Wireless Indoor Outdoor Thermometer & Humidity Station
Digital Indoor Outdoor Thermometer & Humidity Station
Large display with simultaneous reading of both temperature and humidity.
Temperature readings can be switched indoor or outdoor and from maximum to
minimum readings at the press of a button. Alarm function on both temperature
and humidity. Stand or wall mounting supplied complete with 2.8metres of cable
for outside probe.
Temperature range Indoor: 0 to 50ºC, Outdoor: -50 to +70ºC
Dimensions: 98 x 74 x 17mm
Catalogue No
Description
EN44-212
Wireless Temperature & Humidity Station
Thermohygrograph
EN44-214
The Thermohygrograph has cast brass side frames and base, mechanism
machined and fabricated from high quality brass, polished and lacquered.
Recording Section
• Battery operated quartz clock with simple mechanism for changing rotation from daily to weekly.
• Daily or weekly rotation selected by change gear provided.
• Recording is effected by easily changed fibre tipped pen.
Specification
Humidity
Temperature
Range
0 to 100%
0 to 50˚C
Accuracy
±3% between 20 & 80%
±5˚C
Sensing Element
Specially treated human hair
Bi-metalic coil (corrosion protected)
Catalogue No
Description
EN44-214
Thermohygrograph
EN44-216
Pack of 100 daily charts
EN44-218
Pack of 100 weekly charts
EN44-220
Fibre Tipped Pen (Humidity-Red)
EN44-222
Fibre Tipped Pen (Temp-Black)
[email protected]
Telephone: +44 (0)1635 872 929
Meteorology
EN44-224
Complete with 400 filter paper discs. Water reservoir graduated every 0.1ml.
Weight 60g.
Catalogue No
Description
EN44-224
Piche Evaporimeter
EN44-226
Filter paper discs: packet of 400
EN44-228
Clip: for attaching filter paper discs
EN44-230
Stand
Hook Gauge Evaporimeter
Supplied complete with, hook gauge, still-well and aluminuim pan. (supplied
without floating thermometer)
Specification
EN44-240
Aluminium Pan
1220 dia x 254 high
Weight, Kg
65
Meteorology
Dimensions, mm
Hook Gauge
Graduated from 0 to 10mm, reads to 0.02mm
Dimensions, mm
nominal 215 high
Weight, g
340
Toxic Gas
Detection
Micrometer
Still Well
Dimensions, mm
nominal 50 dia x 215 high
Weight, g
1.8
Floating Thermometer
-30ºC to +50ºC x 0.5ºC
Accuracy
+/-1ºC
Dimenisons, mm
340 x 140 x 60
Weight, g
310
Catalogue No
Description
EN44-232
Hook Gauge Evaporimeter
EN44-234
Aluminium Pan
EN44-236
Still-Well
EN44-238
Hook Gauge
EN44-240
Floating Thermometer
EN44-232
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Range
EN44-238
Soil /
Sediment
Testing
Analysis
Piche Evaporimeter
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
94
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
Meteorology
95
EN44-242
Plastic Rain Gauge
• Moulded from clear high quality SAN (Styrene Acrylonitrile).
• Permanently embossed and accurate scale clearly calibrated in single millimetres from 1mm to 40mm.
• Approx size: 200mm x 125mm
Catalogue No
Description
EN44-242
Plastic Rain Gauge
Copper Rain Gauge
With 127mm diameter rim with inner can and measuring cylinder calibrated in
mm. Weight 1.1Kg.
Catalogue No
Description
EN44-244
Copper Rain Gauge
EN44-248
Measuring Cylinder
Splayed-base Rain Gauge
EN44-244
Model constructed from copper with splayed base to provide extra stability, and
a brass septum ring with a 127mm diameter. Supplied with inner can
taper-base glass measure.
Catalogue No
Description
EN44-250
Splayed-base Rain Gauge
EN44-252
Taper-base glass measure
Dines Tilting Siphon Rain Gauge
EN44-254
The Tilting Siphon Rainfall Recorder is manufactured to British Met Office
drawings. It produces a record of rainfall against time. The automatic tilting
action ensures unlimited collecting capacity. It is frequently used in conjunction
with a daily rain gauge to provide a permanent record of the start and end
of rainfall, together with variations in intensity. The movement of a float in
the collecting chamber causes a pen to mark a daily or weekly chart, which
is viewed through the hinged front window. When 25mm of rain has fallen represented on the chart by a linear distance of 50mm - the pen is at the top of
the chart and the chamber tilts and empties. The pen then returns to the bottom
of the chart to start recording again. The Gauge is constructed from non-ferrous
materials and supplied with a hand-wound clock.
Catalogue No
Description
EN44-254
Dines Tilting Siphon Rain Gauge
EN44-256
Daily charts: pack of 200
EN44-258
Fibre Tip pen
Electronic Wireless Rain Gauge
EN44-264
A wireless rain gauge with rainfall memory, outdoor temperature and digital
clock.
Current and accumulated rainfall, 9-days rainfall history, high rainfall alert with
Green LED blinking, indication Selectable mm / inch unit, Outdoor temperature
measurement, Digital clock with calendar
• Automatic self-emptying rain cup
• Outdoor Temperature Sensor
• Measures and then empties collected rainfall
• Wireless transmission range up to 30m for rain gauge and wireless outdoor thermometer
• Displays daily, 9 day historical, and total rainfall records
• Rainfall amounts are shown as inches or millimeters
• Customizable daily rainfall alarm
• Displays outdoor temperature
Catalogue No
Description
EN44-264
Electronic Wireless Rain Gauge
[email protected]
Telephone: +44 (0)1635 872 929
Meteorology
EN44-266
The Weather Monitor gives continuous and acurate weather readings at a
glance. Wind Speed and barometric pressure are both displayed by means of
pointers, wind direction displayed by attractive LED lights positioned around
the wind speed dial. External temperature (min / max) is shown by clear LCD
display. All sensors are extremely robust with a high degree of accuracy and
each is supplied pre-wired with 25 meters of cable. Installation is very simple as
clear instructions are provided.
Specification
Wind Direction
Resolution
16 points i.e. 22.5˚C
Threshold
1.5m/s, 3Knots, 3.5 mph or 5km/h
Wind Speed
80Kts, 90 mph, 145km/h
±7.5%
Resolution
Better than 1knot
Meteorology
Max Speed Indicated
Accuracy
Barometer
Range
950 - 1050 mB
Accuracy
±5mB
Temperature
±0.5˚C @20˚C
Resolution
0.1˚C
Size, mm
255 (L) X 130 (H) X 55 (D)
Power
220-240V 50 / 60 Hz and 12-24V d.c.
Catalogue No
Description
EN44-266
Weather Monitor
Cambell Stokes Sunshine Recorder
The Campbell Stokes Sunshine Recorder is manufactured to the specifications
of the British Meteorological Office The instrument is used to measure the
duration of sunshine each day
There are three types of measuring cards to correspond to the behaviour of the sun
at different seasons: long curved for use in summer, straight for use near the
equinoxes and short curved for use in winter
EN44-268
Specification
Latitude Adjustment
Size, mm
0˚ to 40˚ N or S
102mm ±1.3mm diameter
Focal length for sodium D light,
74.9mm ±0.25
240 x 187 x 165
Weight. kg
4.3
Catalogue No
Description
EN44-268
Campbell Stokes Sunshine Recorder
EN44-270
Sunshine Cards: 1 year supply
(150 summer / 150 winter / 100 equinoctial)
Sphere
EN44-272
Summer Cards: 100 cards
EN44-274
Winter Cards: 100 cards
EN44-276
Equinoctial Cards: 100 cards
Aneroid Barometer
EN44-278
Specification
980-1030 hpa
±1 hpa
Size, mm / Weight g
130 dia x 35 / 550
Catalogue No
Description
EN44-278
Aneroid Barometer
Telephone: +44 (0)1635 872 929
Training
Training
Range
Accuracy
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
-40˚C to +50˚C
Accuracy
Toxic Gas
Detection
Range
Soil /
Sediment
Testing
Analysis
Weather Monitor
[email protected]
96
EN44-280
Barograph
The Barograph is made with a solid metal base. The mechanism is machined
& fabricated from high quality brass, polished and lacquered. Supplied with
fabricated, vented sheet metal cover finished in blue hammer finish stove enamel
and convenient carrying handle.
Battery operated quartz clock with simple mechanism for changing rotation from
daily to weekly or monthly or Clockwork clock
Daily or weekly rotation selected by change gears provided
Recording is effected by easily changed fibre tipped pen.
Specification
Range
950 to 1050hPa
Accuracy
+/- 0.5hPa
Sensing element
Aneroid capsule
Catalogue No
Description
EN44-280
Barograph, supplied metal cover and carrying handle
EN44-282
Pack of 200 daily charts
EN44-284
Pack of 200 weekly charts
EN44-286
Fibre tipped pen
EN44-288
Digital Handheld Anemometer and Thermometer
An easy to use hand held, electronic anemometer giving accurate wind speed
measurement and ambient temperature.
Specification
EN44-290
Wind speed units in
m/s, ft/min, knots, km/hr, mph
Range
0 to 30 m/second 0 to 90 km/hour
Accuracy
+/- 5%
Temperature
-10 to +45° C
Accuracy
+/- 2ºC
Dimensions, mm
105 x 40 x 15
LCD Dimensions, mm
23 x 32
Battery
3v lithium (CR2032)
Catalogue No
Description
EN44-288
Digital Handheld Anemometer with Thermometer
Hand Held Anemometer
Very easy to use portable hand-held instrument providing a direct reading of
wind speed in four different units on an engraved scale. With plastic outer case
and cups.
Specification
Scales
0 to 120 kph, 0 to 12 Beaufort, 0 to 35 m/s, 0 to 70 knots
Accuracy
±3%
Threshold
Approximately 2m/s
Operating
Temperature Ranges
-35 to 45 ˚C
Catalogue No
Description
EN44-290
Hand held Anemometer
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
Meteorology
97
[email protected]
Telephone: +44 (0)1635 872 929
Meteorology
EN44-292
This 4 in 1 multi-function environment meter is a cost-effective introduction to aid
conformance to health and safety in the work place. It measures Sound Levels,
Light Levels, % RH and Temperature. The LCD display has large digits and
function indicators.
Lux
%RH
Range
35 to 130dB
0 to 20,000
25 to 95%
Resolution
0.1 dB
0.01 Lux
0.11%
Accuracy
±3.5 dB
±5%
±5% RH
Operation
0°C to 40°C, below 80% RH
Power
9V PP3 Alkaline Battery (ALR-61)
Dimension, mm
250 x 90 x 30
Weight, g
392
Catalogue No
Description
EN44-292
4 in 1 multi-function environment meter
Temp
-20 to
+750 °C
0.1 °C
±3% reading
±2°C
Stevenson Screen
Designed to hold a range of basic weather instruments. Made from good quality
wood with double louvred sides and painted white.
Size (mm): Interior:435 (L) x 250 (W) x 445 (H). Exterior:585 (L) x 405 (W) x 668
(H). Weight: 21kg
Catalogue No
Description
EN44-294
Stevenson Screen
Manual Weather Station
EN44-296
A simple weather station comprising a range of conventional instruments
housed in a Stevenson Screen to enable basic weather data to be collected
daily.
The complete station comprises the following instruments;
Rain Gauge EN44-244 (page 95)
Max / Min Thermometer EN44-200 (page 91)
Wet & Dry Bulb Hygrometer EN44-208 (page 92)
Hand Held Anemometer EN44-290 (page 97)
Stevenson Screen EN44-294 (page 98)
Catalogue No
Description
EN44-296
Manual Weather Station
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Sound
Toxic Gas
Detection
Specification
Meteorology
• 2 Ranges for Sound with selectable ‘A’ or ‘C’ frequency weightings
• Cosine corrected silicon diode sensor for Lux Levels
• Semiconductor sensors in the probe for humidity & ambient temperature
measurements
• K-type input for °C / °F temperature measurements
• 28mm LCD display with function indicators
• Data Hold function freezes displayed value
• Max Hold displays highest measured value
• Max memory displays highest measured value since power on
• Auto Power Off prolongs battery life
• Low Battery warning
• Standard 4mm camera bush for tripod mounting
• Supplied in a carry case with Lux probe, Humidity / Temperature probe, K-Type wire probe wind muffler and battery
Soil /
Sediment
Testing
Analysis
4 in 1 multi-function environment meter
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
98
Toxic Gas
Detection
Toxic gases are present in a wide variety of industrial and civil
installations and their detection and monitoring is crucial for the
safe working conditions of staff and of the public in general.
This section contains a range of simple gas detectors and
multiple gas monitors widely used by engineers and technicians.
Training
Training
Soil/
SediSoil/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic Gas
Toxic
Gas
ment
Mobile
Mobile
LaboSediment
Air Quality
Quality
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
Toxic Gas Detection
99
[email protected]
Telephone: +44 (0)1635 872 929
Toxic Gas Detection
EN55-102
Gas
Range
Standard Alarm
EN55-102
Oxygen
0-25%
19 / 23%
EN55-103
Hydrogen sulphide
0-100ppm
5ppm
EN55-104
Carbon monoxide
0-500ppm
30ppm
EN55-105
Sulphur dioxide
0-20ppm
1ppm
EN55-106
Chlorine
0-20ppm
0.5ppm
EN55-107
Nitrogen dioxide
0-20ppm
1ppm
EN55-108
Ammonia
0-100ppm
25ppm
EN55-109
Ozone
0-1ppm
0.1ppm
EN55-110
Hydrogen
0-2000pm
N/A
EN55-111
Hydrogen cyanide
0-25ppm
5ppm
EN55-113
Phosphine
0-5ppm
0.2ppm
EN55-114
Fluorine
0-1ppm
0.1ppm
EN55-115
Phosgene
0-1ppm
0.1ppm
EN55-116
Nitric oxide
0-100ppm
25ppm
EN55-117
Carbon dioxide
0-5%
0.5%
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Catalogue No
Toxic Gas
Detection
Typical Response Times (T90) : Flammable 20s, Toxic Gas 20s, Oxygen 10s
Gas Range Standard Alarm (UK): Flammable 0-100% LEL 20%
Single unit charger with UK, EU or US plug or in-line 110V / 230V supply
Dimensions 90 x 48 x 24mm H x W x D, Weight; approx 140g.
Meteorology
With rugged impact resistant construction and compliance to IP65, these
detectors offer a wide range of gases including six flammable calibration
options.
Designed for use in the toughest environments they provide an unbeatable
combination of powerful loud and bright alarms with a compact and lightweight
design.
Simple
• True one button operation
• Easy to read backlit display for gas diagnostics and operating status
• Clear calibration due warning
Alarms
• 95dBA audible alarm
• Striking twin red / blue visual alarm
• Internal vibrating alarm
• 2 levels of instantaneous alarm and TWA alarms for toxic versions
Robust
• Tough polycarbonate housing
• Water and dust resistant to IP65
Flexible
• Flammable, toxic and oxygen sensor solutions
• Rechargeable and Li-ion battery versions available
• Extensive data and event logging
• Fully interchangeable intelligent sensor modules
Soil /
Sediment
Testing
Analysis
Portable Gas Detectors
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
100
Training
Training
Soil/
SediSoil/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Mobile
Mobile
LaboToxic Gas
Sediment
Air Quality
Quality
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
Toxic Gas Detection
101
EN55-208
Gas Detection Tubes
Gas detection tubes are one of the most common forms of gas analysis.
These versatile tubes make possible countless applications in industry,
laboratory work, environmental protection and many other areas which require
measurement results to be instantly available so that decisions can be made.
There is also no need for calibration by the user – the calibration is shown in the
form of a scale printed on the tube.
Catalogue No
Description
EN55-202
Automatic pump for use with gas detection tubes supplied complete
with tube opener and battery pack
EN55-204
Battery Charger 6 V / 800 mA
EN55-206
Spare Battery pack for Automatic Pump
EN55-208
Hand Bellows Pump Set supplied with Carrying case and Tube opener
Tubes
Packs of 10
Ammonia 5/a
Note:
Many other tubes are
available covering a
wide range of gasses,
please contact us for
details
Standard Range of
Measurement
Measurement
Time
[20 °C, 1013 hPa]
[min.]
5 to 70 ppm
1
50 to 700 ppm
6s
Catalogue No
EN55-220
Benzene 15/a
15 to 420 ppm
4
EN55-221
Carbon Dioxide 100/a
100 to 3000 ppm
4
EN55-222
Carbon Disulphide 5/a
5 to 60 ppm
3
EN55-223
Carbon Monoxide 10/b
100 to 3000 ppm
20s
EN55-224
10 to 300 ppm
3.5
Chlorine 50/a
50 to 500 ppm
20s
EN55-225
Cyanide 2/a
2 to 15 mg/m3
2.5
EN55-226
Ethyl Benzene 30/a
30 to 400 ppm
2
EN55-227
Ethyl Glycol Acetate 50/a
50 to 700 ppm
3
EN55-228
Formaldehyde 2/a
2 to 40 ppm
30s
EN55-229
Hydrazine 0.25/a
0.25 to 10 ppm
1
EN55-230
Hydrocarbons 0.1%/b
0.1 to 1.3 Vol%
3
EN55-231
Hydrogen 0.5%/a
0.5 to 3.0 Vol%
1
EN55-232
10 to 200 ppm
1
EN55-233
1 to 20 ppm
10
Hydrogen Sulphide 1/d
Hydrogen Sulphide 100/a
100 to 2000 ppm
30s
EN55-234
Mercaptan 20/a
20 to 100 ppm
2.5
EN55-235
Mercury Vapour 0.1/b
0.05 to 2 mg/m3
10
EN55-236
Nitric Acid 1/a
5 to 50 ppm
2
EN55-237
1 to 15 ppm
4
Nitrogen Dioxide 2/c
5 to 100 ppm
1
2 to 50 ppm
2
EN55-238
Nitrous Fumes 20/a
20 to 500 ppm
30s
EN55-239
Nitrous Fumes 2/a
5 to 100 ppm
1
EN55-240
2 to 50 ppm
2
Oxygen 5%/C
5 to 23 Vol%
1
EN55-241
Ozone 0.05/b
0.05 to 0.7 ppm
3
EN55-242
Ozone 10/a
20 to 300 ppm
20s
EN55-243
Pentane 100/a
100 to 1500 ppm
3
EN55-244
Petroleum Hydrocarbons 10/a
10 to 300 ppm
1
EN55-245
Petroleum Hydrocarbons 100/a
100 to 2500 ppm
30s
EN55-246
Phenol 1/b
1 to 20 ppm
5
EN55-247
1 to 25 ppm
3
EN55-248
0.5 to 5 ppm
6
Sulphur Dioxide 0.5/a
Sulphur Dioxide 20/a
20 to 200 ppm
3
EN55-249
Sulphuric Acid 1/a (9)
1 to 5 mg/m3
100
EN55-250
Toluene 100/a
100 to 1800 ppm
1.5
EN55-251
Toluene 5/b
50 to 300 ppm
1
EN55-252
5 to 80 ppm
5
[email protected]
Telephone: +44 (0)1635 872 929
Toxic Gas Detection
EN55-260
This monitor detects the presence of carbon monoxide in the surrounding
area and warns the user both visually and audibly about dangerous gas
concentrations e.g. when installing and servicing gas heaters.
• No zero phase, instrument can be used immediately
• Adjustable alarm threshold
• CO zeroing at site
Specification
Measuring Range
0 to +1999 ppm
Accuracy
±10 ppm (0 to +99 ppm) ±10 % (+100 to +499 ppm) ±20 % (
>+500 ppm)
1 ppm
Resolution
Operating
Temperature
Battery type
5 to +45°C
Battery life
150 h (with beeper switched off)
Reaction time
40 s
Dimensions, mm / g
128 x 46 x 18. Weight : 350
Catalogue No
Description
EN55-260
Portable Ambient CO Monitor, includes, carrying case with belt clip,
headphones, wrist strap, sampler and calibration protocol
2 batteries Type AAA
Soil /
Sediment
Testing
Analysis
Portable Ambient CO Monitor
Meteorology
EN55-262
• Optical bar display
• Sensor self-test after switching on
• Rising alarm tone with increasing gas concentration
• Continuous tone when alarm threshold is exceeded
• Audible confirmation of readiness to operate
• Battery monitoring with optical display
Specification
Methane
Propane
Measuring Range
0 to 20.000 ppm CH4
0 to 10.000 C3H8
Lower response thresholds
100 ppm CH4
50 C3H8
1st alarm limit
10.000 ppm CH4 (20% LEL)
5000 C3H8 (20% LEL)
General Technical Data
-5 to +45 °C
Battery Type
2 batteries type micro AAA 1.5 V (LR03)
Battery Life
4 h (LR03)
Dimensions, mm / g
128 x 46 x 18 Weight 300
Catalogue No
Description
EN55-262
Gas Leak Detector, including case with belt clip and wrist strap and
batteries
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Highly practical gas leak detector for fast checks on gas pipe connections, with
visual bar display.
Toxic Gas
Detection
Gas Leak Detector
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
102
EN55-300
Personal Multi-Gas Detector
This new range of multi gas detectors has been developed especially for
personal monitoring applications. They are designed to measure up to 5
combustable gases & vapours.
Specification
Temperature
-20 - +50 °C
Pressure
700 - 1300 hPa
Humidity
Alarms
0 - 95% r.h.
Visual
360°
Vibrating and Audible
Multi-tone
90 dB at 30 cm
Ingress Protection
IP 67
Operating time
12 hours (without Ex sensor > 700 hours) when using the Save Energy
Mode > 40 hours
Charging time
4 hours
Can be read out via Infrared > 1,000 hours with 5 gases and a recording
interval of 1 value per minute
Maximum hose length 30 m;
Data logger
Pump operation
Dimensions
(W x H x D),mm
48 x 130 x 44
Weight, g
200
Catalogue No
Description
EN55-300
Personal Multi-Gas Detector basic instrument with an integrated data
logger and calibration certificates (requires power pack).
Choose up to four sensors
EN55-301
Power pack & charging set
Rechargeable NiMH power supply T4, charging module and a single
charger (for worldwide use).
EN55-302
GasVision Software
Stores data for reports and exposure levels. Creates graphs and
spreadsheets
Catalogue No
Gas
Measuring Range
Resolution
Response Time
(seconds)
EN55-303
O2
EN55-304
CO
0 - 2000 ppm
2 ppm
15
EN55-305
H2S
1 ppm
15
EN55-306
CO / H2S
2 ppm / 1 ppm
20
EN55-307
NO
0 - 200 ppm
0 - 2000 ppm / 2
ppm
0 - 200 ppm
0.5 ppm
10
EN55-308
NO2
0 - 50 ppm
0.1 ppm
15
EN55-309
SO2
0 - 100 ppm
0.1 ppm
10
EN55-310
HCN
0 - 50 ppm
0.1 ppm
10
EN55-311
CO2
0.5 Vol. %
0.1 Vol. %
30
EN55-312
Ozone
0 - 10 ppm
0.01 ppm
10
EN55-313
OV (Organic
Vapour)
0 - 200 ppm
0.5 ppm
20
0 - 25 Vol %
0.1 Vol. %
10
Note:
A wider range of sensors and accessories are available
for this product, please contact us for the full list.
Training
Training
Soil/
SediSoil/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Mobile
Mobile
LaboToxic Gas
Sediment
Air Quality
Quality
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
Toxic Gas Detection
103
[email protected]
Telephone: +44 (0)1635 872 929
Toxic Gas Detection
EN55-400
This detector will measure up to five gases simultaneously and continuously.
A combination of more than 25 sensors allows flexible solutions to individual
monitoring tasks. It is the ideal companion in a variety of applications where
the reliable detection of oxygen, toxic and combustible gases and vapours is
necessary.
Specification
Temperature
-20 - +50 °C
Pressure
700 - 1300 hPa
Humidity
0 - 95% r.h.
Alarm - Visual
Alarm - Vibrating and
Audible Multi-tone
Ingress Protection
360°
Operating time
Data logger
IP 67
12 hours (without Ex sensor > 700 hours) when using the Save Energy
Mode > 40 hours
4 hours
Can be read out via Infrared > 1,000 hours with 5 gases and a recording interval of 1 value per minute
140 x 150 x 75
Weight, kg
1.1
Catalogue No
Description
EN55-400
Portable Multi-Gas Detector
5 Gas Analyser, basic unit including a calibration adapter, water and
dust filter. Requires power pack, charging module & power supply
EN55-401
Rechargeable power pack NiMH 4.8 V / 3.0 Ah
EN55-402
Charging module
EN55-403
Power supply for one charging module
EN55-404
Power Supply for up to seven charging modules
Catalogue No
EN55-410
CO
0 – 2000 ppm
EN55-411
H2S 100
0 – 100 ppm
EN55-412
OV (Organic Vapour)
0 – 200 ppm
EN55-413
NO
0 – 200 ppm
EN55-414
NH3
0 – 300 ppm
EN55-415
NO2
0 – 50 ppm
EN55-416
SO2
0 – 100 ppm
EN55-417
Cl2
0 – 20 ppm
EN55-418
CO2
0 – 5 Vol.-%
EN55-419
H2
0 – 2000 ppm
EN55-420
O2 100
0 – 100 Vol.-%
EN55-421
O2 LS
0 – 25 Vol.-%
EN55-422
H2S
0 – 100 ppm
EN55-423
IR CO2
0 – 5 Vol.-%
Note:
A wider range of sensors and accessories are available
for this product, please contact us for the full list.
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Maximum hose length 30 m;
Dimensions
(W x H x D),mm
Toxic Gas
Detection
Pump operation
Meteorology
Charging time
90 dB at 30 cm
Soil /
Sediment
Testing
Analysis
Portable Multi-Gas Detector
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
104
Air / Dust
Sampling &
Monitoring
Dust consists of particles in the atmosphere that originate from various
sources such as soil dust raised by the wind, volcanic eruptions, and
pollution caused by human activity. Dust in homes, offices, and other
human environments contains small amounts of plant pollen, human
and animal hairs, textile fibers, paper fibers, minerals from outdoor
soil, human skin cells, and many other materials which may be found
in the local environment.
The presence of excessive and/or contaminated dust particles in the
atmosphere is both unpleasant and potentally harmful to human and
animal health and the equipment in this section is designed to sample
and monitor these levels.
Training
Training
Soil/
SediSoil
/
Water
Air / Dust
Laboratory
Noise &&
Laboratory
Noise
Gas
ment
Mobile
Mobile
LaboToxic Gas
Sediment
Air Quality
Quality Sampling & Toxic
Air
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
Air/ Dust Sampling & Monitoring
105
[email protected]
Telephone:
Telephone: +44 (0)1635
872 929
Soil /
Sediment
Testing
Analysis
Ambient Dust Sampling
Meteorology
EN65-110
Catalogue No
Description
EN65-110
Dust Deposit Gauge-Frisbee Type-Complete Kit with sticky pad adapter
and 2 x 5 litre bottles.
EN65-112
Spare HDPE Bottle-5litre-with standard cap
EN65-114
Spare Foam Particle Trap
Dust Deposit Gauge
A low cost dust gauge that measures dust flux, ie the horizontal component of
wind-blown dust and is measured in milligrams per square meter per day
(mg/m2/day). The unit complies with BS1747 part5.
EN65-116
• 4 x 1000ml HDPE collecting bottles with internal seal
• 1 x 600ml wash bottle
• 4 spare collecting bottles
• Calibration data
• Overall height 1.6m, weight approx 14kg
Description
EN65-116
Directional Dust Gauge, complete kit
EN65-118
Spare Collecting Bottle for Directional Dust Gauge
Telephone: +44 (0)1635 872 929
[email protected]
Training
Training
Catalogue No
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Air Quality
Quality
Mobile
Mobile
LaboAir
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
Monitoring
Laboratories
ratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
A low cost dust gauge that measures dust deposition, i.e. dust falling from the
sky and is measured in milligrams per square meter per day (mg/m2/day)
• Anodized aluminium frisbee-type collector with 227mm diameter aperture
• Large capacity collecting bottle will accommodate 120mm rain (240mm with the 10-litre bottle) and has wide neck permitting easy access for cleaning and removal of Polyester foam dust trap
• Spare dust trap and bottle
• Sticky pad adapter for determining prevailing direction
• Bird guard reduces risk of polluted samples from bird strikes
• Tripod base, which can be spiked down, ensures stability on uneven surfaces
• Weight approx. 8kg
Toxic Gas
Detection
Dust Deposit Gauge
106
EN65-200
Air Sampling Pump
This highly versatile air sampling pump provides high-performance sampling for
asbestos and other particulates. The unit is enclosed in a robust steel casing, a
front mounted power socket to provide easy access for charging or powering,
and a sturdy handle for easy portability. Use the fully programmable timer to set
a manual run, a timed run with or without delayed start, or intermittent sampling.
Ideal for: area and environmental monitoring, bio-aerosol sampling, indoor air
studies, asbestos monitoring, long term background monitoring, and stack
sampling
• Wide flow range: 2 to 26 L/min to free air
• Fully programmable
• Manual run
•Timed run and delayed start
• Intermittent sampling
• Robust steel casing with sturdy handle for easy portability
• Long run times
• High-performance sampling capabilities
• Convenient front mounted power socket
• Battery or mains AC operation
• Flow fault feature ensures sample integrity
• Run time display is retained during fault
• Operating temperature: -5 to 50oC
• Weight: 6.9kg
• Size 18 x 11 x 20 cm
EN65-210
Catalogue No
Description
EN65-200
Air Sampling Pump, 2 - 26 litres / min, supplied complete with
rechargeable battery, charger & 1m tubing
EN65-202
Aluminium Sampling Mast, 1m
EN65-204
25mm Open Face Sampling Head
EN65-206
G.F / A filters for general sampling of “Inhalable” and “Respirable”
dusts 25mm, pkt 100
EN65-208
Rotameter 2.0-26.0 L/min, calibration accuracy Class 2.5 VDI / VDE
General Dust Sampling & Monitoring Kit
Designed for personal monitoring in work areas this kit will help you to maintain
a record of dust levels in the workplace at minimal cost.
Rotameter and stand, I.O.M sampling head with cassette, tweezers, accessory
container, all in a plastic carry case.
Catalogue No
Description
EN65-210
General Dust Sampling & Monitoring Kit
EN65-212
GFA Pre-Weighed Filters 25mm (Pkt of 10)
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Mobile
Mobile
LaboToxic Gas
Sediment
Air Quality
Quality
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
107
[email protected]
Telephone: +44 (0)1635 872 929
Hand Held Airborne Particulate Monitor
EN65-250
The Handheld Airborne Particulate Monitor is a small and compact instrument
that can be used to study short to long term monitoring of airborne dust
particles in both indoor and outdoor environments.
• Real time air quality monitoring
• Simultaneous TSP, PM10, PM2.5 and PM1 monitoring
• Ideal for portable workplace monitoring of atmospheric dust
Specification
Laser nephelometer
Standard inlet
Environmental mode
TSP (1mm stainless mesh)
Range
0 to 6000 micrograms per cubic meter
Detection limit
0.01 micrograms per cubic meter
Particle size range
0.5 to 20 micron diameter
Flow Rate
600cc per minute
Internal Memory
32kB
Power supply
Rechargeable battery
Dimensions, mm /
weight, kg
160 x 100 x 100, 1.2
Catalogue No
Description
EN65-250
Handheld Airborne Particulate Monitor, supplied with battery pack,
charger, PC cable, software, spare filters, and carrying case.
TSP, PM10, PM2.5, PM1.0
EN65-252
Toxic Gas
Detection
Airborne Particulate Monitor is a small and compact instrument that can be
used to study short to long term monitoring of airborne dust particles.
The particulate monitor can be used effectively to determine particle
concentration in the local area along with wind speed and direction.
• Real time air quality monitoring
• Simultaneous TSP, PM10, PM2.5 and PM1 monitoring
• Multiple units can be installed in networks
Specification
Laser nephelometer
Standard inlet
TSP (1mm stainless mesh)
Heated inlet
Heating to 60°C
Environmental mode
TSP, PM10, PM2.5, PM1.0
Range
0 to 6000 micrograms per cubic meter
Detection limit
0.01 micrograms per cubic meter
Particle size range
0.5 to 20 micron diameter
Flow Rate
600cc per minute
Alarm to phone or email
Internal memory
128kB
Power supply
Rechargeable battery
Dimension, mm /
weight, kg
260 x 160 x 150 / 11.8
Catalogue No
Description
EN65-252
Airborne Particulate Monitor, includes lamp post box, battery, charger,
PC cable, software, and spare filters
EN65-254
Anemometer
EN65-256
GSM / GPRS modem
EN65-258
Solar Panel Kit
Training
Training
Telephone: +44 (0)1635 872 929
EN65-258
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Air Quality
Quality
Mobile
Mobile
LaboAir
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
Monitoring
Laboratories
ratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Airborne Particulate Monitor
Detector
Meteorology
Detector
Soil /
Sediment
Testing
Analysis
Ambient Dust Monitoring
[email protected]
108
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Mobile
Mobile
LaboToxic Gas
Sediment
Air Quality
Quality
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
109
EN65-300
Portable Ambient Air Sampler (PAAS)
The Portable Ambient Air Sampler (PAAS) is an air sampler for particulate
matter. The patented low flow technology used in the PAAS was developed with
the USEPA in an effort to address the need for portable air pollution sampling
technology.
Whilst not a reference method sampler, the PAAS gives results that closely
approximate reference method air quality data. Both accurate and precise,
the battery operated, lightweight PAAS is ideal for sampling at remote sites or
areas without power. In addition, the low cost of the sampler allows a network
of PAAS to be deployed at a fraction of the cost for a similar reference station
network.
The PAAS features a 7-day programmable timer, a constant flow control
system, an elapsed time totaliser, rechargeable battery packs, and all-weather
PVC enclosure. The PAAS can separately sample particulate matter in the TSP,
PM10, and PM2.5 range.
Specification
Double-diaphragm with laminar flow valve technology
Pump
Rated for 10,000 hours continuous operation
Flow range 0-10 Litres / min
Timer
Up to six sample periods per day
Easily removed for cleaning
Pre-separator / Cassette
Filter Holder Assembly
Standard 47mm filter holder
Nominal 10 micron or 2.5 micron “cut-point” at 5 litres / minute sample
rate
AC or DC operation
Variable flow adjustment
Electronics
Elapsed time totaliser
Low battery indicator and shut-off
Low flow rate indicator and shutoff
14.8V / 118 Watt Hours
Battery Pack
1.2 amp external battery charger, 100-240VAC, 47-63Hz, Full recharge
in less than 6 hours
Dimensions: 25 x 30 x 18cm
Weight: less than 5kg fully configured
Enclosure
All-in-one transport case
Dimensions: 50 x 30 x 46cm
Weight: less than 18kg with all accessories
Catalogue No
Description
EN65-300
Portable Ambient Air Sampler for TSP & PM-10 sampling includes:
Pump Module, 2 x PM-10 Impactors, 2 x Louvered Inlets, 2 x Filter
Holder Assemblies, 2 x Battery Packs, Battery Charger, Universal
Mounting Bracket, and an all-weather transport case.
EN65-302
Portable Ambient Air Sampler for TSP, PM10 & PM-2.5 sampling includes; Pump Module 2 x PM-10 Impactors, 2 x PM-2.5 Impactors, 2 x
Multiple Impactor Adapters, 2 x Louvered Inlets, 2 x Filter Holder Assemblies, 2 x Battery Packs, Battery Charger, Universal Mounting Bracket,
and an all-weather transport case
EN65-304
Fibre film filters, recommended for PM10 gravimetric analysis, 47mm
dia, pack of 50
Pure Teflon filters, recommended for PM2.5 gravimetric analysis, 47mm
dia, pack of 50
EN65-306
EN65-318
Quartz filters, alternative to Teflon filters, 47mm dia, pack of 100
Petrislides, plastic cassettes for shipping and storage of filters, pack of
100
Field Calibration Kit w / Digital Manometer
EN65-320
Solar Panel Assembly for Portable Ambient Air Sampler
EN65-308
EN65-310
[email protected]
Telephone:
872 929
EN65-340
Ideal for weighing dust samples this micro balance is equipped with a high
performance force compensation weigh cell that is very precise, but also
exceptionally reliable and durable. The built-in, motorized calibration weight
activates by the touch of a key and activates automatically when the ambient
temperature changes by a specific value. The internal ionizer neutralizes
electrostatically charged objects instantly, which removes errors caused by
static electricity. The balance automatically adjusts its response characteristics
(FAST, MID, or SLOW) by analyzing the influence of drafts or vibrations on the
stability of the display value.
5.1g / 22g
Minimum Capacity
Readability
0.001mg / 0.01mg
Resolution
Repeatability (std.
deviation)
Linearity
0.001mg / 0.01mg
Pan Size
25mm Ø
Power supply
220 / 240VAC 50 / 60Hz mains adapter
Catalogue No
Description
EN65-340
Micro Analytical Balance, dual range, capacity 5.1g x 0.001g and 22g x
0.01g, includes weighing pan for 50 and 95mm dia dust filters
EN65-342
Anti Vibration Table
EN65-344
Table Top Breeze Break
0.001mg / 0.01mg
0.004mg (for 1g) / 0.01mg
+/-: 0.010mg / 0.02mg
Note:
Unable to locate the precise instrument you require?
Please contact us for expert advice.
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Air Quality
Quality
Mobile
Mobile
LaboAir
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
Monitoring
Laboratories
ratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Capacity
Toxic Gas
Detection
Specification
Meteorology
• Built in Fanless Ionizer
• Interlockable Sliding Doors
• Internal Calibration Mass
• Automatic Response Adjustment
• Reverse Backlit LCD Display
• Twelve weighing units
• GLP / GMP / GCP / ISO compliant output
• Data memory function
• RS-232C and Quick USB interfaces as standard
• Counting mode
• Automatic Counting Accuracy Improvement (ACAI)
• Percent mode function
• Comparator function with buzzer
• Auto power on function
• Underhook function
• Density determination function
• Built-in temperature, humidity & atmospheric pressure sensors
• Special pans and holder for dust particulate filter weighing
Soil /
Sediment
Testing
Analysis
Micro Analytical Balance
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
110
Air Quality
Monitoring
Good air quality is essential to the health and
well-being of all living organisms.
Poor air can have adverse effects on our quality of life
and can damage the fabric of buildings and sensitive
flora and fauna.
Air quality monitoring provides raw measurements
of air pollutant concentrations and with appropriate
analysis and interpretation, these measurements can
be transformed into useful information about air quality.
Training
Training
Mobile
Mobile
LaboLaboratories
ratories
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Air Quality
Quality
Air
Toxic
Gas
ment
Toxic Gas
Sediment
Sampling
&
Meteorology
Analytical
Vibration
Quality
Monitoring
Detection
Sampling
Testing
Monitoring Detection
Monitoring
Equipment
Testing
Analysis
Analysis
111
111
[email protected]
Telephone: +44 (0)1635 872 929
EN73-102
The Air/Vapour Sampling Kit, has been designed to take air or vapour samples
using standard Tedlar air sampling bags and contains the following components
all housed in a durable carrying case:
• Air Sampling Pump, twin port, constant flow rate 20 to 225 litre/min
• Battery Charger
• One Metre Length of Tygon Tubing
• Tedlar Air Sampling Bags, capacity 1 litre (pack of 10)
• Instruction Manual and Step by Step Guide
Specification
Flow rate, constant
20 to 225 litre / min
Accuracy
Typical run time
+/-5% in constant flow mode
Battery charge time
approx 6 hours
0 to 45ºC
Flow fault
after 15 secs, pump goes into Hold, retains accumulated run time
display, and displays fault icon
Timer
1 to 9999 min display +/- 1% accuracy
Battery Charger
230V, AC 50hz
Kit dimensions, cm
45 x 30 x 8
Weight, kg
1
Catalogue No
Description
EN73-102
Air / Vapour Sampling Kit
EN73-101
Air / Vapour Sampling Bags (Pack of 10)
12 hours at 200 litre/min
Meteorology
Toxic Gas
Detection
All of the testing methods used in each outfit are performed by collection of
the gas in a special absorbing solution and the subsequent chemical analysis.
Through the use of these methods, better quantitative results may be obtained
than results acquired by gas indicator tubes or length of stain methods. Each
analytical method has been appropriately modified to make the entire outfit
suitable for testing either field levels or levels in confined areas. Precision
impinging units and general purpose impinging units are included in the outfit.
Packaged in a rugged plastic container, each analytical test module is easily
removed from the outfit for individual investigations. Sufficient reagents are
supplied to perform 25 tests with a total capacity of 150 tests for the entire
combination outfit. Inexpensive refill packages of the chemical reagent are
available.
Air Pollution Sampling Pump
For use with the Air Pollution Test Kit in monitoring atmospheric air pollution,
checking eight-hour exposure limits for workers in industry, and more. The
brushless DC motor pumps air to a small diaphragm valve assembly which
maintains flow rates for 48 hours of continuous sampling before the batteries
need replacing. Intermittent sampling extends the range of usage considerably.
A quality flowmeter accurately monitors the volumes of air being sampled. The
flowmeter has an easy-to-read scale calibrated from 0.2 to 2.0 litres per minute
(lpm) and can be adjusted. Readings are in 0.1 lpm. Supplied complete with
flowmeter, impinger holder, batteries, connection tubing, and carrying case.
Power supply, 4 x C cell batteries
Dimensions: 25cm(w) x18cm(d) x15cm(h). Weight: 2.7kg.
Description
EN73-104
Air Pollution Test Kit tests for Ammonia, Chlorine, Lead, Nitrogen Dioxide, Sulphur Dioxide, and Total Oxidants
EN73-106
Refill Unit for all reagents in EN73-104
EN73-108
Air Pollution Test Kit tests for Ammonia, Carbon Monoxide, Chlorine,
Hydrogen Sulphide, Nitrogen Dioxide, and Sulphur Dioxide
EN73-110
Refill Unit for all reagents in EN73-108
EN73-112
Air Pollution Sampling Pump for use with Air Pollution Test Kit (EN73-104
& EN73-108),
[email protected]
Training
Training
Catalogue No
EN73-112
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Air Quality
Quality
Mobile
Mobile
LaboAir
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
Monitoring
Laboratories
ratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
EN73-104
Air Pollution Test Kit
Telephone: +44 (0)1635 872 929
Soil /
Sediment
Testing
Analysis
Air / Vapour Sampling Kit
112
EN73-300
Urban Pollution Monitor (UPM)
Developed to monitor the effects of traffic flow, the UPM provides real time
recording of local air pollution levels.Using a microprocessor controlled logger,
the UPM can monitor and record information on a whole range of airborne
pollutants and cross reference them to site specific data such as temperature
and relative humidity.
A wide range of sensor configurations is possible, with options for up to 3
electrochemical gas sensors, PM monitor, met sensors and sound. Depending
on the configuration chosen, the sample gas may be pumped into the unit or
allowed to diffuse through natural air movement. Additional flexibility is achieved
with a wide range of power options, from standard mains power to internal or
external battery.
Constructed from weatherproof plastic, the UPM is environmentally sealed in
a rugged, compact enclosure. Fixing is via a twin aperture bracket that allows
fitting to most industrial or urban sites within minutes. This makes it ideal for
short to medium term testing periods.
The logger has the capability to record up to several months of time stamped
15 minute averages. All data gathered is held in memory by an on-board lithium
cell which allows all operational settings to be retained without external supply.
The UPM houses its own communications system so no need for hard wired
telemetry. The integral radio link is capable of communicating with a dedicated
base station up to 20 metres away, whilst the GSM option allows data recovery
or program changes from almost anywhere.
EachUPM is individually identified, which allows the use of several loggers
within a data gathering network. The supplied operational software is
Windows™ compatible and supplied for multi user installation. Information on
logger status, battery life and the dynamic state of all operational parameters is
available via an easy to use pull down menu.
Specification
Enclosure
Weatherproof plastic 280 mm x 168 mm x 123 mm deep
Weight, kg
1.8
Power Requirement
12 V DC <50 mA
Battery Life:
Six months plus temperature and battery status
Memory
500 Kbytes as standard
Power supply
220 / 240VAC or battery power depending on sensor configuration
Electrochemical Sensor
Gas
Range
Resolution
Carbon monoxide
0-1000 ppm
0.1 ppm
Nitrogen dioxide
0-10 ppm
20 ppb
Sulphur dioxide
0-10 ppm
25 ppb
Nitrous Oxide
0- 100ppm
0.5ppm
Hydrogen Sulphide
0-10ppm
0.1ppm
Repeatability
1% of signal
Span drift
<1% per year
Response time
<40 seconds
Temperature range
-20 to +50ºC
Sensor life up to 2 years, depending on levels measured
PM10 Particulate Sensor
Sensor type
Forward light scatter
Sensitivity
1µg/m³
Precision
0.0031µg/m³ or 2% of reading
Long term stability
5% of reading
Training
Training
Mobile
Mobile
LaboLaboratories
ratories
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Toxic Gas
Sediment
Air Quality
Quality
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Monitoring
Equipment
Testing
Analysis
Analysis
113
[email protected]
Telephone: +44 (0)1635 872 929
Description
EN73-300
Urban Pollution Monitor supplied with 3 sensors, mains powered with
pump, data logger, radio and RS232 comms and mounting kit. Select
3 gas sensors OR 2 gas sensors and PM10 particulates sensor.
EN73-302
Carbon Monoxide(CO)
EN73-304
Nitrogen Dioxide(NO2)
EN73-306
Sulphur Dioxide (SO2)
EN73-308
Nitrous Oxide(NO)
Hydrogen Sulphide (H2S)
PM10 Particulates Sensor
EN73-314
PID / VOC Sensor
EN73-316
Windspeed & Direction Sensor
EN73-318
Radio Base Station for data download.
EN73-320
GSM communication (replaces the radio & RS232 option)
Note:
Toxic Gas
Detection
Up to 3 of the above gas sensors or 2 gas sensors
plus the PM10 particulates sensor together with
PID/VOC,sensor, and windspeed & direction sensor
can be ordered with any UPM unit (EN73-300)
Meteorology
EN73-310
EN73-312
Soil /
Sediment
Testing
Analysis
Catalogue No
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Air Quality
Quality
Mobile
Mobile
LaboAir
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
Monitoring
Laboratories
ratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
114
Training
Training
Mobile
Mobile
LaboLaboratories
ratories
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Toxic Gas
Sediment
Air Quality
Quality
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Monitoring
Equipment
Testing
Analysis
Analysis
115
Industrial Flue Gas
& Vehicle Exhaust
Emission Monitoring
Portable Gas Emissions Analyser
EN73-402
Portable 8 Gas Analyser is the most accurate, robust and flexible portable flue
gas analyser currently available.
• Measures 8 gases in a single instrument
• Monitors of up 17 measurement parameters
• Robust, light weight, industrial design with widescreen colour display for daily use in the harshest plant environments
• Wake and Sleep, semi-continuous operation mode
• Multiple language support
• USB Comms interface to PC & data transfer - supports USB memory sticks
• Data acquisition & analysis software.
• Self diagnostic checks are run continuously on calibration status and battery life.
• Smoke Probe Option, length 0.3m (incl 3m hose, filter paper, chart and inline flow meter) other probes available on request
• Flue Gas Temperature: Max. 600 °C standard, Max. 1400 °C with High
Temperature Probe option
Sensor
Minimum
Range
Maximum
Range
Accuracy % of
Range
Resolution
o2
0 to 25% v/v
0 to 30% v/v
±1%
Co (low)
0 to 100 ppm
0 to 6000 ppm
±2%
0.1% v/v
0.1 ppm
Co (H2 comp)
0 to 100 ppm
0 to 4000 ppm
±2%
0.1 ppm
Co (high)
0 to 4000 ppm
0 to 10 %
±2%
0.1 ppm
So2
0 to 100 ppm
0 to 4000 ppm
±2%
0.1 ppm
No
0 to 100 ppm
0 to 5000 ppm
±2%
0.1 ppm
No2
0 to 100 ppm
0 to 1000 ppm
±2%
0.1 ppm
H2S
0 to 200 ppm
0 to 1000 ppm
±2%
0.1 ppm
Co2
0 - 25% v/v
±2%
0.1% v/v
Hydrocarbons (CxHy )
0 to 4% v/v (Calibrated as methane)
0.1% v/v
Specification
Note:
Please contact Wagtech
Projects for a further range
of probes and accessories
available for this product
Power Supply
95-265 VAC ±10%, 50-60 Hz, 30 Watts. Battery, rechargeable lead-acid
(internal). Typical 8 hour operation.
Dimensions, mm
453 x 120 x 245
Weight. kg
6
Standard Instrument is supplied complete with integral sampling pump, water
catchpot and gas filters, rechargeable batteries, battery charger, probe handle,
3m hose with Standard Probe, length 0.3m.
Catalogue No
Description
EN73-402
Portable Gas Emissions Analyser
EN73-404
Data Acquisition Software
EN73-406
Printer Module with rechargeable batteries & charger
EN73-408
Smoke Probe, length 0.3m (incl 3m hose, filter paper, chart and inline
flow meter)
EN73-410
High Temperature Probe, 0.3m length
EN73-412
Carrying Case
[email protected]
Telephone: +44 (0)1635 872 929
This portable gas analyser is the complete tool for the modern emission
monitoring engineer. Highly portable and easy to use, it is a perfect back-up to
continuous systems or when random spot-checking is required.
The differential pressure and temperature connections allow precise burner and
pump set-up, whilst the exhaust gases can be monitored over user defined time
periods, confirming pollution controls.
Range
Resolution
Accuracy
Oxygen
0 - 25%
0.1%
Carbon Monoxide
0 - 10,000ppm
+/- 1ppm
Nitric Oxide
0 - 1,000ppm
+/- 1ppm
Nitrogen Dioxide
0 - 200ppm
+/- 1ppm
+/- 0.3%
<100ppm;+/- 5ppm >100ppm
+/- 5%
<100ppm;+/- 5ppm >100ppm
+/- 5%
<20ppm;+/- 2ppm
Sulphur Dioxide
Carbon Dioxide
(calculated)
CO / CO2 ratio
0 - 2,000ppm
+/- 1ppm
<100ppm;+/- 5ppm
0 - 0.9999
Combustion efficiency
0 - 100%
0 - 25%
Nitrogen Dioxide
0 - 200ppm
+/- 1ppm
<20ppm;+/- 2ppm >20ppm;+/- 5%
Sulphur Dioxide
0 - 2000ppm
+/- 1ppm
<100ppm;+/- 5ppm >100ppm;+/- 5%
Hydrogen Sulphide
High Capacity Carbon
Monoxide (in lieu of standard)
0 - 200ppm
+/- 1ppm
<40ppm;+/- 2ppm >40ppm; +/- 5%
0 - 100,000ppm
+/- 1ppm
<100ppm;+/- 5ppm >100ppm;+/- 5%
Instrument
range
-5°C to 50°C
Battery
Rechargeable Ni-Cd.. Life 4-5 hours, charge time 2 hours
Charger input voltage
115V or 230V; 50 / 60Hz AC
Data logging / Printing
Printing user configurable, 75 set of readings, through RS232
Dimensions, mm /
Weight, kg
280 x 120 x 112 / 1.3
Probes
K-type thermocouple
Pistol grip; 250mm stainless steel probe length; depth gauge; 2.5m
hose length
Accuracy +/- 0.3%; +/- 1°C
Maximum temperature
800°C with 1,100°C available on request
Construction
Draught / pressure measurement
Range
+/- 150mbar
Resolution
0.01mbar
Accuracy
+/- 0.5% fsd measured at 50mbar
K-Type thermocouple
Accuracy
+/- 0.3%; +/- 1°C
Catalogue No
Description
Portable Flue Gas Analyser, with sensors for O2, CO, NO, supplied with
carry case
Select 3 sensors from following;
EN73-420
Nitrogen Dioxide (optional sensor)
EN73-422
Sulphur Dioxide (optional sensor)
EN73-423
Hydrogen Sulphide (optional sensor)
EN73-424
High Capacity Carbon Monoxide (optional sensor)
Telephone: +44 (0)1635 872 929
[email protected]
Training
Training
EN73-421
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Air Quality
Quality
Mobile
Mobile
LaboAir
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
Monitoring
Laboratories
ratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Optional Gas Sensors
Toxic Gas
Detection
Standard Gas Sensors
Meteorology
• Measures; oxygen, carbon monoxide, and nitric oxide as standard
• Optional sensors for; Nitrogen Dioxide, Sulpher Dioxide, Hydrogen Sulphide. Calculates; Carbon Dioxide Nitrous Oxides
• 7 fuel types (natural gas, propane, butane, heavy & light oil, coal & coke)
• Integrated printer with one button operation
• High quality 250mm stainless steel probe for temperature (up to 800°C) and gas measurement with 2.5m of hosing
• User configurable logging up to 75 reports, transferable to standard Windows software
• Integrated water trap with easy to change dual filtration
Soil /
Sediment
Testing
Analysis
Portable Flue Gas Analyser
116
EN73-430
Vehicle Exhaust Gas Analyser
A hand held unit used for the measurement of Carbon Monoxide, Hydrocarbons,
Carbon Dioxide, Oxygen and Nitrogen Oxides, this analyser is ideal for emission
diagnostics, tuning, pre-compliance and regulated testing applications.
• Simple one-time set up procedure. Easily select between Petrol (Gasoline), Liquid Petrolyeum Gas / Autogas (LPG), Compressed Natural Gas (CNG) and Diesel settings
• Logging and auto-logging – memory stores up to 255 sets of full results. Tests stored manually or automatically timed. Results downloaded to a PC using optional software (see accessories)
• The analyser includes an integral IR transmitter that is compatible with the optional printers so that results can be recorded anywhere
• Additional features include Lambda / AFR measurement, Corrected CO, RPM and Oil / Exhaust gas temperature measurements
Specification
Sensor response
15 seconds
Pre-programmed fuels
Petrol, LPG and CNG
Ambient operating range
+5°C to +45°C / 10% to 90% RH non condensing
Storage temperature
Minimum 0°C Maximum +50°C
Battery charger
Input 110 Vac / 230 Vac nominal. Output 10 Vac off load
Dimensions, mm
220 x 55 x 120
Weight, kg
1.1
Range
Resolution
Accuracy
Carbon Monoxide
(Infrared)
0-10% Over-range 20%
0.01%
±5% of reading
±0.06% volume
Oxygen (Fuel Cell)
0-21%
0.01%
±5% of reading ±0.1%
volume
Hydrocarbon (Infrared)
0-5,000ppm Over-range
20,000ppm
1ppm
±5% of reading ±12%
volume
Carbon Dioxide (Infrared)
0-16% Over-range 20%
0.1%
±5% of reading ±0.5%
volume
0-5,000ppm
1ppm
0-4,000ppm ±4% or
25ppm
4,000-5,000ppm ±8%
0-150°C
1°C
±2°C ±0.3% of reading
±4°F ±0.3% of reading
200-6,000rpm
1rpm
50rpm
0.8-1.2
0.001
0.01
NOx (Electro-Chemical)
Oil Temperature
RPM Optional
Lambda
AFR Petrol
AFR LPG
Catalogue No
Description
EN73-430
Vehicle Exhaust Gas Analyser includes gas analyser with water trap and
calibration report, plastic carry case, battery charger, mains lead, high
temperature exhaust probe, 12V adapter cable and spare filters.
Accessories
EN73-432
Software kit with CL3 lead for PC interface
EN73-434
Infrared Printer with thermal paper and AA batteries
EN73-436
Pack of 5 Thermal Paper Rolls for Printer
EN73-438
RPM Clamp
EN73-440
Oil Temperature Probe
Training
Training
Mobile
Mobile
LaboLaboratories
ratories
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Toxic Gas
Sediment
Air Quality
Quality
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Monitoring
Equipment
Testing
Analysis
Analysis
117
[email protected]
Telephone: +44 (0)1635 872 929
Radiation Survey Meter
EN73-502
Radiation detected
Beta >
100 keV
Gamma > 7 keV
Response time
0 mR/h to 5 mR/h (8 sec)
0 mR/h to 50 mR/h (2.5 sec)
0 mR/h to 500 mR/h (2 sec)
0 R/h to 5 R/h (2 sec)
0 R/h to 50 R/h (2 sec)
Accuracy
Within 10 % of readings between 10 % and 100 % of full scale indication
on any range, exclusive of energy response
Detector
Chamber (cc volume air ionization) 349 cc
Chamber wall (phenolic) 246 mg/cm2
Chamber window (mylar) 6.6 mg/cm2
Beta slide 440 mg / cm2
Automatic features
Auto-zeroing, auto-ranging, and auto-backlight
Power requirements
Two 9 V alkaline, 200 hours operation
Warm-up time
One minute
Display
Analogue / digital with backlight
Environmental
Temperature range: -20ºC to +50ºC
Relative humidity : 0 % to 100 % (at 60ºC)
Geotropism: < 1 %
10 x 20 x 15 / 1.11
Catalogue No
Description
EN73-502
Radiation Survey Meter
Telephone: +44 (0)1635 872 929
Training
Training
Dimensions, cm /
weight, kg
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Air Quality
Quality
Mobile
Mobile
LaboAir
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
Monitoring
Laboratories
ratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Specification
Toxic Gas
Detection
Used by X-ray manufacturers, state inspectors, government agencies, police
and fire departments, emergency response and hazmat teams, nuclear
medicine labs, hospital radiation safety officers, nuclear power workers
• Detects skin-dose - beta particle and deep-dose gamma and X-ray radiation
• Requires no adjustments; simple two button operation
• Delivers quickly read, correct value through autoranging capability
• 30 % more accurate than other available meters
• More than one week of continuous operation from 2x 9-volt alkaline batteries
• Measures both dose and dose-rate
• Useful for contamination-detection, general radiation area surveys,
radiation- level monitoring, and hazardous materials assessment
• Ruggedised design
Meteorology
The Radiation Survey Meter is a portable and practical means for identifying
irradiated goods, and for helping remediate contamination and safety issues
while minimally impacting operations. Use of the device reassures employees
that radiation risks are known, monitored and measured for their protection. If
radiation is found, a clear and quantifiable result allows managers to comply
federal guidelines, without overreacting with unnecessary steps that might halt
operations, impact productivity or lead to lost revenue.
Soil /
Sediment
Testing
Analysis
Radiation Detectors
[email protected]
118
EN73-504
Nuclear Radiation Monitor
This monitor is used widely by hospitals, laboratories, industry, police
departments, fire departments and other emergency response agencies. The
digital display shows readings in a choice of counts per minute (up to 50,000
cpm) or mR/hr (up to 50 mR/hr) or in accumulated counts. A red LED blinks
and a beeper chirps with each count.
• Data output and built-in timer let you document radiation activity over selected sampling periods
• Removable test plate for general surveying
• Measures alpha, beta, gamma, and x-radiation
• Provides precision radiation monitoring
• User-adjustable levels with audio / visual alarm indicators
• Set timer for periods of 1 to 10 minutes in one-minute increments, 10 to 50 minutes in ten-minute increments, or 1 to 24 hours in one-hour increments
• 4-digit LCD with auto-ranging bar graph updates readings every three seconds.
• Excellent sensitivity to low levels of alpha, beta, gamma, and X-rays.
• Anti-saturation circuitry holds readout at full-scale in fields up to 100 times the maximum reading.
Specification
Range
mR/hr: 0.001 to 100
cpm: 0 to 300,000
total counts: 1 to 9,999 (x1000)
cps: 0 to 5000
mSv/hr: 0.1 to 1000
Accuracy
±1.5% up to 20 mR/hr (130,000 cpm), ±20% above these values
Function
(50mm-dia source against screen)
Source: Sr-90
Efficiency: 38%
Source: 14C (0.130 ÂµCi)
Efficiency: 5.3%
50mm diameter “pancake” uncompensated Geiger Mueller tube with
mica window
adjustable timer, external calibration control
Window
4.4 cm dia; 1.5-2.0 mg / cm2 thick
Power
One 9 V battery
Dimensions
(WxHxD), mm
82 x 150 x 30
Weight, g
150
Catalogue No
Description
EN73-504
Nuclear Radiation Monitor, supplied complete with external GM tube
probe with anodized aluminized housing, black foam grip, and a 9V
battery, and padded carrying case.
Sensitivity
Detector
Training
Training
Mobile
Mobile
LaboLaboratories
ratories
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Toxic Gas
Sediment
Air Quality
Quality
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Monitoring
Equipment
Testing
Analysis
Analysis
119
[email protected]
Telephone: +44 (0)1635 872 929
EN73-506
The entry of radon gas into buildings can be dependent upon a number of
factors. Understanding which factors are responsible can help in determining
the most effective remedial measures.
The concentration of Radon in the ground is produced by uranium which is
radioactive and is naturally present in all rocks and soils to varying degrees and,
when present in soil gas, can result in radon levels in significant concentrations.
Similarly, ground situated over metal ore seams or mines can have high levels
of radon gas within it and, as a result, ground gas is drawn into properties and
high radon levels can be present in the building.
This Portable Radon Monitor is an easy-to-use battery operated instrument for
use in all types of buildings and gives fast and precise measurement of the
radon level.
Specification
20% after one week with 100 Bq/m3
10% after one month with 100 Bq/m3
0ºC to 40ºC and Relative humidity below 95%
Power
Three LR03 (AAA alkaline) batteries
Battery lifetime
Approximately 3 years at 100Bq/m3
Dimensions, mm /
Weight, g
20 x 69 x 22.5 / 130
Catalogue No
Description
EN73-506
Portable Radon Monitor
Toxic Gas
Detection
Operation Environment
Meteorology
Short-term measurement
value
Long-term measurement
value
Soil /
Sediment
Testing
Analysis
Portable Radon Monitor
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Air Quality
Quality
Mobile
Mobile
LaboAir
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
Monitoring
Laboratories
ratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
For all your safety equipment
needs please see our
General Lab Catalogue
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
120
Training
Training
Mobile
Mobile
LaboLaboratories
ratories
Laboratory
Laboratory
Analytical
Analytical
Equipment
Equipment
Soil/
SediSoil
/
Noise &&
Water
Noise
Air / Dust
Toxic
Gas
ment
SamToxic
Gas
Sediment
Air
Quality
Air
Quality
Vibration
Vibration
Sampling &
Meteorology
Quality
Detection
Sampling
Testing
Monitoring Monitoring
Monitoring
Testing
Analysis
Analysis
121
Noise &
Vibration
Monitoring
Excessive noise and vibration levels in
the environment created by industrial,
transportation, construction and mining
activity is a major cause for concern to
both the public and local authorities and
can lead to high stress levels in humans
and prolonged ill health.
[email protected]
Telephone:
872 929
EN81-102
This mini digital sound level meter has a wide dynamic range and gives virtually
instant readings. It is ideal for quick and easy environmental sound level checks.
• ‘A’ frequency weighting
• Precision 50mm electret condenser microphone
• 26mm LCD display with function indicators
• Display updates every 0.5 seconds
• Min / Max Hold of measured values
• “Over” display for out-of-range input
• Auto Power Off after 15 minutes of no activity
• Low Battery indicator
Specification
40 to 130dB
Resolution
0.1dB
Accuracy
±3.5dB (94dB @ 1KHz)
Frequency Range
100Hz~8KHz
Function
adjustable timer, external calibration control
Power
1 x 9V PP3 Alkaline Battery (MLR-61)
Dimensions
(WxHxD), mm /
Weight, g
128 x 51 x 32 / 131
Catalogue No
Description
EN81-102
Mini Digital Sound Level Meter, supplied with wind muffler and battery
Meteorology
Range
EN81-120
Specification
Class 2 Sound Level Meter
Microphone &
Preamplifier
Display
Level Range
Noise Floor
Frequency Weighting
IEC 61672-1:2002 (Integrating, Sound Exposure and Sound Level Meters)
Type 2 Pre-Polarised ½” (13.2 mm) Electret
Free-Field, Electret Condenser Microphone: 20Hz – 8KHz ± 2dB ; –32
dB ± 3 dB re 1V/Pa
Back-lit LCD panel (8x1 Characters)
Measuring Range: 35-140dB
Linear operating range (IEC61672-1): 65dB
3 Measurement Ranges (IEC61672-1): 35-100dB; 55-120dB( Reference
Range) 75-140dB
Typical ’A’ Weighting <32 dB(A) rms. ‘C’ Weighting <38 dB(C) rms.
Calibration
Software controlled 91.0 to 120.0 dB (1kHz) in 0.1 dB steps
Power Supply
Batteries: 1 x 6LR61 (size PP3), Life: >12 hours (alkaline batteries,
continuous operation).
Dimensions
(WxHxD), mm
Weight,kg
450 x 300 x 50 / 1
Catalogue No
Description
EN81-120
Digital Sound Level Meter Kit, supplied complete with digital sound
pressure level meter, single level calibrator, and carrying case
Iinstrument Response
Telephone: +44 (0)1635 872 929
[email protected]
Training
Training
Measurement
Parameters
‘A’ and ’C’ to IEC 61672-1:2002 and IEC 60651:1979+A1+A2
20 Hz - 8 kHz (including microphone); 1 Hz - 20 kHz (electrical characteristics)
Simultaneous rms. and Peak
Lp (Sound Pressure Level), Lmax (maximum Level), Cpeak (Max.Peak
Level)
Other Displays: Elapsed time, Overload, Battery Life
Frequency Range
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Air Quality
Quality
Mobile
Mobile
LaboAir
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
Monitoring
Laboratories
ratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
This sound level kit enables the first stage of risk assessment to be made to
determine whether there is a noise problem requiring a full evaluation. Action
level measurement gives a snapshot of the risk in a particular environment.
• Easy to use sound meter
• Simple calibration
• Instant measurement at the touch of a button
• Robust, easy to carry pocket size instruments
Toxic Gas
Detection
Digital Sound Level Meter Kit Type 2
Standards
Soil /
Sediment
Testing
Analysis
Mini Digital Sound Level Meter
122
EN81-130
Safety / Environment Sound Meter Class 1
This system will enable noise levels to be checked in the workplace or in the
field and will ensure that employees and others near a noise source is not being
subjected to noise levels above dangerous noise levels.
This Sound Meter System contains an integrating Class 1 sound level meter
capable of measuring sound levels, integrated sound level averages, personal
sound exposure levels and dose levels using the supplied dosemeter
microphone cable along with the Class 1 calibrator for daily checks on the
meter all contained in a handy carrying case.
Specification
Class 1 Intergrating Sound Level Meter
Standards
IEC 61672-1:2002 (Integrating, Sound Exposure and Sound Level Meters)
IEC 60651:2001 (Sound Level Meters)
IEC 60804:2000 (Integrating Function)
Microphone &
Preamplifier
Type 7146A Pre-Polarised ½” (13.2 mm)
Free-Field, Electret Condenser Microphone: 20Hz – 20KHz ± 2dB , –32
dB ± 3 dB re 1V/Pa
Display
Level Range
Back-lit LCD panel (8x1 Characters)
Alpha-Numeric display for measured results
Measuring Range: 35-140dB
Linear operating range (IEC61672-1): 65dB
3 Measurement Ranges (IEC61672-1): 5-100, 55-120 (Reference
Range) 75-140dB
Noise Floor
Typical ’A’ Weighting <32 dB(A) rms. ‘C’ Weighting <38 dB(C) rms.
Frequency Weighting
‘A’ and ’C’ to IEC 61672-1:2002 and IEC: 60651:2001,
Frequency Range
12.5 Hz - 20 kHz (including microphone) 1 Hz - 20 kHz (electrical
characteristics)
Iinstrument Response
Simultaneous rms. and Peak
Measurement Parameters
Lp (Sound Pressure Level), Leq (Equivalent Sound Level), Lmax (maximum Level), Cpeak (Max. Peak
Level), LEpd (Sound Exposure Level), LAE (SingleEvent Sound Exposure Level)
Other Displays: Elapsed time, Overload, Battery Life
Calibration
Software controlled 91.0 to 120.0 dB (1kHz) in 0.1dB steps
Power Supply
Batteries: 1 x 6LR61 (size PP3), Life: >12 hours (alkaline batteries,
continuous operation).
Dimensions, mm /
Weight, kg
450 x 300 x 50 / 1
Catalogue No
Description
EN81-130
Safety / Environmental Sound Meter System supplied complete with
Class 1 Pocket Integrating Sound / Lux meter, Calibrator with barometer,
Dosemeter Plug-in Microphone, and carrying case
Training
Training
Mobile
Mobile
LaboLaboratories
ratories
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Toxic Gas
Sediment
Air Quality
Quality
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Monitoring
Equipment
Testing
Analysis
Analysis
123
[email protected]
Telephone:
872 929
Soil /
Sediment
Testing
Analysis
Blast Monitoring
Meteorology
Toxic Gas
Detection
EN81-200
Vibration and blast monitoring is conducted where ground vibration as a
result of construction or mining activities may cause damage to nearby
existing structures and / or disturbance to the surrounding population.
Such construction activities may include quarrying, mining, deep dynamic
compaction of soils, pile driving, or general construction activities.
This compact seismograph is ideal for taking measurements quickly and easily
with data interpretation simplified using the supplied software.
• Impulse mode for blast monitoring
• Continuous mode for piling, rail and road traffic monitoring
• Tri-axial geophone sensor
• Features: triggering from 0.1 mm/s
single range from 0.1 mm/s to 200 mm/s
auto record length from 2 to 18 seconds (in impulse mode)
• Can trigger and record PPV, acceleration or displacement parameters
• Air overpressure from 100 to 140 dB Linear Peak
• Memory for about 300 events or 30 days continuous recording
• Built in timer function
• Instant readout and review of memory event results on LCD
• Supplied with RS232 cable and Windows™ based software
• Supplied with shoulder bag
Specification
-10ºC to + 50ºC
Power Supply
Two Alkaline ‘D’ cells (or external 12 volt supply)
Battery Life
Up to 20 days continuous monitoring
Dimensions, mm /
Weight,kg
300 x 250 x 130 / 3.6
Catalogue No
Description
EN81-200
Blast Monitoring Seismograph
EN81-202
Portable Printer
Telephone: +44 (0)1635 872 929
Training
Training
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Air Quality
Quality
Mobile
Mobile
LaboAir
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
Monitoring
Laboratories
ratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Blast Monitoring Seismograph
[email protected]
124
Laboratory
Analytical
Equipment
A wide range of specialised analytical and general
laboratory equipment is required to analyse fully the quality
of water, soil, dust and air in the environment.
The following major instruments are included in this section:
- UV / Vis Spectrophotometer
- Atomic Absorption Spectrophotometer (AAS)
- High Performance Liquid Chromatograph (HPLC)
- Gas Chromatograph (GC)
For information on our full range of laboratory equipment
please refer to our General Laboratory Catalogue.
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Laboratory
Air / Dust
Noise
Air Quality
Quality
Toxic
Gas
ment
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Quality
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Monitoring
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Monitoring
Equipment
Testing
Analysis
Analysis
Laboratory
Analytical Equipment
Air
Quality Monitoring
125
125
[email protected]
Telephone: +44 (0)1635 872 929
Laboratory Air
Analytical
Quality Equipment
Monitoring
A Variable or Fixed Bandwidth Spectrophotometer which offers very high
performance with fixed optical bandwidth of less than 2nm pharmacopoeia
compliant, or variable optical bandwidth of 0.5, 1, 2 and 4nm for high resolution
applications.
The spectrophotometer’s performance and powerful software are only normally
available with much more expensive instruments.
Symmetrical double beam system
Monochromator
Modified Czerny-Turner design using 1200L/mm holographic diffraction
grating
Detectors
Two silicon diode detectors
Wavelength Range
190 - 1100nm
Wavelength Accuracy
0.5nm
Wavelength
Reproducibility
0.1nm
Optical Bandwidth
< 2nm EN91-301; 1nm EN91-302; 0.5, 1, 2, 4nm EN91-303
Stray Light
Less than 0.02% at 220nm, NaI; and 0.02% at 340nm, NaNO2
Power Requirements
110-250V, 50 / 60Hz, 170 watts
Dimensions, mm
(WxHxD) / Weight, kg
635 x 410 x 210 / 33
Catalogue No
Description
EN91-300
UV and Visible Double Beam Spectrophotometer 190-1100nm. < 2 nm
bandwidth, fully symmetrical optics.
EN91-301
UV and Visible Double Beam Spectrophotometer 190-1100nm.Bandwidth 0.5, 1, 2 and 4nm, fully symmetrical optics.
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Air Quality
Quality
Mobile
Mobile
LaboAir
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
Monitoring
Laboratories
ratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Optical System
Toxic Gas
Detection
Specification
Meteorology
Double Beam Optical System
Provides the highest accuracy of measurement coupled with very high stability
with time. Both sample and reference beams are provided with the same
space facilities, thus catering for the widest possible range of experimental
requirements and not limited to just a simple cell in the reference beam.
Scans Viewed by Scrolling
By scrolling information across the display screen, the effective width of the
screen is a massive 430mm. Long scans, plots and other data may be viewed
in much more detail, than with other instruments.
Powerful Integral Control
Rapid operation with ease of use is provided by the powerful software built into
the computing system of the instruments. The standard software is remarkably
comprehensive but may be expanded, at any time, with additional software
modules when required.
Integral Memory
Scan plots and curves may all be stored, for future use. Integral memory is
provided for up to 100 scans, protected by the operator’s personal security
codes.
Soil /
Sediment
Testing
Analysis
UV-Visible Spectrophotometers
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
126
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Laboratory
Air / Dust
Noise
Air Quality
Quality
Toxic
Gas
ment
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Quality
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Monitoring
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Monitoring
Equipment
Testing
Analysis
Analysis
Laboratory
Air
Quality Monitoring
127
Atomic Absorption Spectrophotometer
This Atomic Absorption Spectrophotometer is a high performance automated
instrument designed to meet the requirements of the modern laboratory. Due
to its versatility and performance it can be used for a wide range of applications
including: Agriculture, Clinical, Environmental, Food, Metal, Mining and
Petrochemical.
• Embedded PC system built into the instrument as standard. Windows 7
professional operating system.
• Automatic 8 lamp turret controlled and optimized by the AA-Win software.
• D2 lamp and Self Reversal background systems fitted as standard.
• High precision minimal optics ensures maximum light throughput to the computer controlled Czerny-Turner monochromator.
• A universal autosampler is available which is conveniently mounted to the front of instrument.
• Absorption and Emission modes are standard as well as peak height, peak area, sequential and manual integration modes.
The Instrument is available in three configurations:
Note:
Catalogue No
Description
Ask us to quote for
installation, commissioning
and training.
EN91-100
Flame AAS – The Instrument is equipped with a Flame atomiser only. 3
flames are available with the air / acetylene as standard configuration
and N2O / acetylene or air / LPG(natural gas) available as an option.
EN91-101
Graphite Furnace AAS – The Instrument is equipped with a Graphite
Furnace Atomiser only. The Graphite head is fixed into the optical path
to maximise performance and eliminate drift. The transversally heated
graphite tube is efficiently heated and cooled due to the precision feedback system.
EN91-102
Flame and Graphite Furnace AAS – The Instrument is equipped with
both Flame and Graphite Furnace Atomiser’s as detailed in the previous
description. Both configurations are installed into the instrument and can
be changed over by a simple selection in the versatile software.
Flame AAS, Atomiser
• Air / Acetylene
This flame uses a 100mm single slot burner for standard configuration.
The high sensitivity (Cu 2ppm > 0.28A) is due to the efficiency of the fixed position glass nebuliser fitted as standard.
• N2O / Acetylene
The burner for this gas has a 50mm slot and is used to measure elements less prone to ionization such as: Aluminium, Tin, Titanium, Calcium and
Vanadium.
• Air / Propane (LPG)
This flame uses a 3 slot burner and with the low pressure requirement it is also much safer to operate. Due to the lower temperature it is ideal for analysing alkali metals such as Potassium, Sodium and Lithium, especially when used in the Emission mode.
• Safety Features: Gas Pressure Monitoring for all gasses, Burner Identification, Flame Sensor, Drain Trap level Sensor, Gas Leak Detector, Safety cut off switch
Graphite Furnace AAS, Atomiser
• The Transverse head is heated and cooled efficiently due to the feedback system and has been designed to reduce analytical problems normally associated with this type of technique.
• Pyrolytically coated graphite tubes are used as standard and are manufactured to improve performance as well as increase the analytical life.
• Platform Tubes are supplied as standard and will accept volumes up to 20ul.
• Up to 10 heat stages are available. These can be set up and stored in the software.
• The graphite furnace tube is cooled efficiently by an optional water circulation system.
• Safety Features, Argon Gas Pressure Sensor, Water Flow Sensor, Over Temperature Sensor.
[email protected]
Telephone: +44 (0)1635 872 929
Laboratory Air
Analytical
Quality Equipment
Monitoring
Soil /
Sediment
Testing
Analysis
Specification
190nm – 900nm
Monochromator
Czerny-Turner Configuration
Spectral Bandwidth
0.1nm, 0.2nm, 0.4nm, 1.0nm, 2.0nm
Wavelength Accuracy
± 0.15nm
Wavelength
Reproducibility
< 0.05nm
Resolution
0.2nm ± 0.02nm
Baseline Stability
0.005A / 30min
Sensitivity
(Cu) 2 μg/ml Absorption > 0.28A (flame)
Cu < 0.004 μg/ml (flame)
Cd < 0.4 x 10-12g (graphite furnace)
Cu < 0.7% (Air / Acetylene flame)
Ba < 1.0% ( Nitrous oxide / Acetylene flame)
Deuterium Arc, Self reversal
Characteristic Concentration Cu < 0.02 μg/ml, Ba < 0.15 mg/ml
(N2O / Acetylene)
Titanium Alloy
Nebuliser High-efficiency glass, Acid proof available as an option
Detection Limit
Repeatability
Background Correction
Burner Heads
Atomization Chamber
Meteorology
Wavelength Range
Corrosion-resistant material
Description
EN91-100
Flame Atomic Absorption Spectrophotometer(AAS) system with an
8 hollow cathode lamp motorised turret with embedded PC control
system complete with pre-loaded M/S Windows 7 operating system
and a data coded Air / Acetylene Burner. 110 / 60Hz or 220V / 50Hz AC,
30A, I phase supply
EN91-101
Graphite Furnace Atomic Absorption Spectrophotometer(GFAAS) with
an 8 hollow cathode lamp motorised turret with embedded PC control
system complete with pre-loaded M/S Windows 7 operating system.
110 / 60Hz or 220V / 50Hz AC, 30A, I phase supply
EN91-102
Combined Automated Flame & Graphite Furnace Atomic Absorption
Spectrophotometer (FGFAAS) with an 8 hollow cathode lamp motorised
turret with embedded PC control system complete with pre-loaded M/S
Windows 7 operating System and a data coded Air / Acetylene Burner
110 / 60Hz or 220V / 50Hz AC, 30A, I phase supply
EN91-103
Universal Auto-Sampler for Flame, Graphite Furnace and Combined
Flame and Furnace AAS
EN91-104
Nitrous Oxide Burner(coded) 50mm Titanium Alloy Burner Head.
EN91-105
Low Temperature Burner Assembly(coded), used only with Natural Gas
for trace analysis of Alkali metals.(Sodium, Potassium, Lithium, Barium
and Calcium)
EN91-106
Air Compressor for use with AAS
EN91-107
Water Circulator System
EN91-108
Manual Hydride Vapour System for AAS system
EN91-109
Acetylene Regulator
EN91-110
Compressed Air Regulator
EN91-111
Nitrous Oxide Regulator
EN91-112
Argon Regulator
EN91-113
Extraction System Complete Kit (Fan, Stainless Ducting, Hood, Bends,
Brackets)
EN91-114
Colour Laser Printer (compatible with embedded PC System.)
EN91-115
Single Element Hollow Cathode Lamps (specify elements required)
Note:
A wide range of single and multi
element hollow cathode lamps
are available for this instrument.
Please specify at time of enquiry
or order, which application the
instrument is to be used for
and a selection of HCL’s will be
recommended.
Note:
Telephone: +44 (0)1635 872 929
[email protected]
Training
Training
A comprehensive selection of single element 1000ppm standard
solutions for AAS are available.
Please advise your requirements.
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Air Quality
Quality
Mobile
Mobile
LaboAir
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
Monitoring
Laboratories
ratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Catalogue No
Toxic Gas
Detection
Depending on the elements to be tested select Compressed Air, Acetylene Gas,
Nitrous Oxide, LPG, Hydride Vapour System, Nitrous Oxide Burner Head, and
Low Temperature Burner Assembly.
128
EN91-700
Gas Chromatograph
Gas Chromatography (GC) with its inherent high sensitivity and high separating
power is one of the more commonly used techniques in the analysis of
environmental samples.
There are two main types of compound that are commonly detected in
Environmental Gas Chromatography analysis:
Volatile Organic Compounds (VOC)
Examples of VOCs are industrial solvents such as carbon tetrachloride,
trichloroethene (TCE), trichloroethane (TCA), benzene and toluene.
Pesticides
Consist of a large group of chemicals that are used in agriculture to control
plant and insect infestation. Common classes of pesticides include organophosphates, chlorinated hydrocarbons and carbamates.
EN91-700 with EN91-706
This Gas Chromatograph with its patented flow through technology provides
excellent chromatographic performance and reliability at realistic prices.
Each GC is a dedicated single channel unit with a split/split-less injector and
programmable pressure control as standard and a choice of detector options.
Flame Ionization (FID), Thermal Conductivity(TCD) and Electron Capture
Detectors(ECD) can cover most of the analytical applications in industry
today. Manual or automatic gas sampling valves can also be fitted with the
autosampler, download software and integration systems this low cost unit can
offer the complete integrated package to solve your analytical requirements.
Specifications
Injectors
• Split/splitless injector supplied as standard with all instruments
• Split linearity better than 3% up to 200:1
• Injector temperature range 60 - 280˚C
• Optional capillary on-column adaptor
• Optional gas sampling valve
Gas Controls
• Electronic pressure control of carrier gas of 0.3 to 50psi, fully programmable with up to five ramps.
• Maximum total flow 250ml/min
• Detector gas control fixed sinter (apply the specified pressure to the instrument for correct gas flow rates
• Optional two channel gas box to allow variability of detector gases
EN91-700 series
GC in use on site
Training
Training
Laboratory
Laboratory
Mobile
Mobile
LaboAnalytical
Analytical
Laboratories
ratories
Equipment
Equipment
Noise
Noise& &ViAir// Dust
Air
Dust
Noise
&
Air Quality
Quality
Air
Quality
Air
Sampling
&
bration
MoniVibration
Vibration Monitoring
Monitoring
Monitoring
Monitoring
Monitoring
toring
Monitoring
Soil
Soil/
/ SediSediSoil/
Soil
/
Water
Toxic
Gas
Toxic Gas
Sediment
ment
Meteorology
Quality
Detection
Sampling
Testing
Detection
Testing
Analysis
Analysis
Laboratory
Air
Quality Monitoring
129
[email protected]
Telephone: +44 (0)1635 872 929
Laboratory Air
Analytical
Quality Equipment
Monitoring
Description
Gas Chromatograph with Flame Ionisation Detector(FID), supplied
without column
Gas Chromatograph with Thermal Conductivity Detector(TCD), supplied
without column
Gas Chromatograph with Electron Capture Detector(ECD), supplied
without column
EN91-700
EN91-702
EN91-704
EN91-706
Autosampler for use with EN91-700 series Gas Chromatographs
Note:
The Gas Chromatographs are supplied
WITHOUT columns which must be ordered
separately.
Please contact Wagtech Projects for advice
on the correct column for your analysis
together with other options available for this
product.
Air/
Noise && Laboratory
Laboratory
Air / Dust
Dust
Noise
Air Quality
Quality
Mobile
Mobile
LaboAir
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
Monitoring
Laboratories
ratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Catalogue No
Toxic Gas
Detection
Control
• Built-in keypad, incorporating 2x16 character LCD display
• PC control via method download software
• Run line control allows the use of most recorders, integrators and PC integration packages
Dimensions and Weight
• Size 16cm (H) x 41cm (W) x 34cm (D)
• Weight 7.5kg,
• Power supply: 800VA, 230V/50/60Hz, 115V/50/60Hz
Meteorology
Detectors
• FID, TCD or ECD
• Temperature range from 100˚C to 320˚C
• FID minimum detectable quantity of 5x10-12 grams of carbon (signal 3x noise level). FID linear range 106
• TCD has 4 tungsten filaments. TCD filament temperatures: 180˚C, 240˚C or 320˚C
• ECD minimum detectable quantity of 0.05x10-12 gm of lindane (signal 3x noise level). ECD linear range 103
Soil /
Sediment
Testing
Analysis
Columns Oven
• Accommodates all capillary columns up to 7 inch cage, maximum length 120m (5 inch cages required above 60 metres)
• Optional packed column capability
• Temperature range from 15˚C above ambient to 300˚C
• 5 ramp temperature programming
• Ramp rates up to 40˚C/min below 200˚C, up to 20˚C above 200˚C
• Maximum isothermal temperature 240˚C
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
130
EN91-500
High Performance Liquid Chromatograph (HPLC)
A useful analytical technique commonly used by the modern environmental
chemist is High Performance Liquid Chromatography (HPLC). Modern
pesticides which have been designed and chemically engineered for
reduced environmental persistence, have driven the increased use of Liquid
Chromatography based solutions.
A wide range of options are available to the chemist for HPLC systems
depending upon the analysis required. The following is a standard system
commonly used for the analysis of pesticides.
Please contact Wagtech Projects for further information on other HPLC systems
and configurations.
Binary - Low Pressure Gradient System
This is a low pressure binary gradient forming system. It uses the dual piston
pump which has the facility for mixing two solvents for binary gradients and of
course may be used in the isocratic mode.
Specification
Binary Gradient Solvent Pump
Flow rate
0.001 to 10L/min in 0.001/min increments
Pressure range
0 to 40Mpa over flow range.
Flow accuracy
<±0.5%.
Precision
<0.1% RSD
Pressure pulsation
<±0.5% at 2mL/min
Gradient forming
Binary low pressure mixing & isocratic high pressure operation.
Gradient control
High speed proportioning valves.
Gradient precision
Material in contact with
fluids
Typically 0.2% RSD at 1mltr/min
Ceramic inserts, ruby & sapphire check valves, & PEEK.
Specification
Variable Wavelength UV/Visible Detector.
Optical System
Double beam with monochromator
Wavelength Range
190-700 nm
Wavelength Accuracy
± 1 nm
Wavelength Precision
± 0.1 nm, single wavelength mode
Optical Bandwidth
8 nm approximately
Stray light
< .02%, 220 nm
Absorbance Range
0.001 to 2 A
Noise
± 0.35 x 10-5 A at 230 nm
Drift
± 3 x 10-5 A/hour at 230 nm
HPLC system is supplied complete with Binary Gradient Solvent Pump, Dual
Wavelength UV/Visible Detector, an 8μL x 10mm flowcell, Rheodyne valve fitted
with a 20μL loop mounted with the column on the mounting panel, solvent
reservoir and pipe organiser, HPLC column (Hyperclone BDS, C18, 5μm, 150 x
4.6mm), HPLC software control system, essential accessories, and installation
kit.
Catalogue No
Description
EN91-500
Analytical Binary Gradient HPLC System Complete, excluding PC
system
EN91-501
PC System with colour printer for data acquisition and control of HPLC
EN91-502
Vacuum Degasser, 2 channel for use with HPLC system, to enhance
performance by reducing bubble formation in the sample.
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Laboratory
Air / Dust
Noise
Air Quality
Quality
Toxic
Gas
ment
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Quality
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Monitoring
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Monitoring
Equipment
Testing
Analysis
Analysis
Laboratory
Air
Quality Monitoring
131
[email protected]
Telephone: +44 (0)1635 872 929
Mobile Laboratories
Meteorology
Toxic Gas
Detection
Air/0/Dust
Noise && Laboratory
Laboratory
Air
Dust
Noise
Mobile
LaboMobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
Laboratories
ratories
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Training
Training
132
[email protected]
Telephone: +44 (0)1635 872 929
Soil /
Sediment
Testing
Analysis
Mobile
Laboratories
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
Mobile Laboratories
133
Fridge
Work space
Mobile Testing Laboratory
Vehicle Specification
• Land Rover Defender 110
• 2.2 litre diesel engine
• 6 speed manual gearbox with locking differential
• Heavy duty double acting shock absorbers
• Meets EU2 Emissions’ targets
• 75 litre (16.5 gall) fuel tank
• Power assisted steering
• Permanent 4-wheel drive
• Disc brakes all-round
• Michelin 4 x 4 - 7.50x16 tubed radial on / off road tyres
• Raised Air Intake
• Ground clearance not less than 300mm
• Underside protection bar
• Front nudge bar (Grill guard)
• Basic Tool kit
• 1 spare tyre and assembly on rear door
• Roof-rack with access ladder
• Air-conditioning
• Laminated windscreen
• Aluminium corrosion resistant body
• 5 door with 5 seats in vinyl trim
• Vinyl trim, cab and second row seats retained
• Supplied with a 36 month or 100,000km International Warranty - whichever comes first
Rear Fitting-Out Specification:
Specially modified to suit the purpose of a small laboratory. Consists of the
following factory fitted components:
Sink
• Exterior grade ply floor overlaid with washable anti-slip flooring
• Sink top and waste with clean and dirty water containers to left hand side of rear saloon.
• 12V Fridge/Freezer: Capacity 43litres including 4 litre freezer compartment under laboratory laminated work surface at rear of second row seats. Powered by 12V vehicle electrics.
• Lockable cupboard with shelf left of fridge.
• Front opening cupboard to right of refrigerator over wheel arch.
• Separate intermediate 12V battery with split charge relay.
• Socket for external generator ( generator not included)
• Rear overhead lighting.
Catalogue No
Description
EN95-100
Mobile Testing Laboratory
Optional Accessories
Roof rack storage
Catalogue No
Description
EN95-224
Front Mounted Vehicle Winch
EN95-226
Long range 127ltr fuel tank
EN95-802
Portable Generator, 2 kva, petrol engine
Note:
Specifications & layout of Mobile
Laboratories can be changed to suit your
requirements. Please contact us.
[email protected]
Telephone: +44 (0)1635 872 929
Mobile Laboratories
Meteorology
Toxic Gas
Detection
Air/0/Dust
Noise && Laboratory
Laboratory
Air
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Land Rover Defender 110
Training
Training
134
[email protected]
Telephone: +44 (0)1635 872 929
Soil /
Sediment
Testing
Analysis
Internal layout
Laboratory Unit
Mobile Environmental Laboratory
Vehicle specification and Accessories:
• Land Rover Defender 130
• Single cab chassis
• 2.2 litre diesel engine
• 6 speed manual gearbox with locking differential
• Double wishbone coil spring suspension
• Heavy duty double acting shock absorbers
• Meets EU2 Emissions’ targets
• 75 litre (16.5 gall) fuel tank
• Power assisted steering
• Permanent 4-wheel drive
• Disc brakes all-round
• Michelin 4 x 4 - 7.50x16 tubed radial on/off road tyres
• Raised Air Intake
• Ground clearance not less than 300mm
• Underside protection bar
• Front nudge bar (Grill guard)
• Basic Tool kit
• Hi-Lift Jack & Standard Jack mounted on roof as safer option
• 1 spare tyre
• Roof rack with access ladder
• Air-conditioning
• Laminated windscreen
• Aluminium corrosion resistant body
• 2 door cab with 2 seats in Vinyl trim,
• Supplied with a 36 month or 100,000km International Warranty - whichever comes first
Internal Layout
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
Mobile Laboratories
135
[email protected]
Telephone: +44 (0)1635 872 929
Mobile Laboratories
Description
EN95-200
Mobile Environmental Laboratory
Description
EN95-220
Cassette mounted Vanexe room 3.0M x 2.5M with 3 windows, zip up
doors & base frame.
EN95-222
Roof mounted air conditioning unit for lab area
EN95-224
Front Mounted Vehicle Winch
EN95-226
Long range 127ltr fuel tank
Air/0/Dust
Noise && Laboratory
Laboratory
Air
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
Catalogue No
Toxic Gas
Detection
Optional Accessories
Meteorology
Catalogue No
Soil /
Sediment
Testing
Analysis
The vehicle is converted to create a comprehensive Mobile Laboratory
Unit with the following features:
• Internal dimensions, m; 2.6 (L) x 1.7 (W) x 1.5 (H)
• Double skin tropical, insulated roof
• Heavy duty, maintenance free batteries
• Coated subframe fitted with modular body of insulated laminated panelling with heavy duty light alloy internal and external extrusions.
• Fold down rear step to right hand side entrance with window in door.
• 12mm Phenolic ply floor overlaid with aluminium tread-plate
• 2 x fluorescent lights and switches in saloon
• Sliding window to left hand side with security grill
• Galvanised roof rack with Access ladder
• Extraction fan at rear
• External Generator locker at rear with 2.5kva generator
• External Locker for clean and dirty water containers
• Fridge/Freezer - 156L/16L
• Worktop to left hand wall, lockable cupboard over with shelves & stowage
• Teal 12V Hand Wash Unit with 5Ltr Tank at left hand centre (Heater operates when engine running)
• Corner cupboard with shelf & 4 lockable drawers LH front
• Desk area with fold-away swivel chair
Training
Training
Telephone: +44 (0)1635 872 929
[email protected]
136
Mobile Trailer Laboratory
Chassis:
• Fully galvanised RHS and Angle welded steel construction
• PAR type side winding jacks
• 2 x 1800kg Peak full beam axle’s c/w auto reverse brakes giving 3500kg gross weight
• Hydraulically damped coupling and jockey wheel
• 12v lighting (rear lamps fitted into protective light recess)
• Under floor chassis mounted spare wheel
Body:
• Internal dimensions; m:- 6.5 (L) x 2.3 (W) x 2.2 (H)
• Overall length 7m to nose cone
• Carbofont (GRP laminated polycarbonate) body panels and roof
• Fire rating is European classification M1; equivalent to BS476 part 6/7 Class1
• Natural high gloss white body panels with anodised extrusions, capping and trim
• Interior walls and ceiling to remain standard white GRP finish
• Floor 12mm treated FE ply with Polyflor non slip, anti static (EN1815) acid and alkali resistant safety vinyl
• Personnel door fitted (UK) near side with 3 point locking emergency door handle
• Folded and welded rigidised aluminium steps with fully adjustable feet, locating guides and locking bolts c/w hand rails
Interior Fitting Out:
• Laboratory furniture and worktops (see laboratory layout)
• Stainless steel sink with fittings
• Water heater with holding tank
• 12v water pump
• Under floor water tank (100 litre)
• Roof mounted air conditioning unit
• Interior lights and power sockets with wiring to outside generator socket
Catalogue No
Description
EN95-400
Mobile Trailor Laboratory
EN95-800
Mobile Generator , 9 KVA chassis mounted
Note:
Specification & layout can be changed to
suit your requirements. Please contact us.
Training
Training
Soil/
SediSoil
/
Water
Laboratory
Noise &&
Air / Dust
Laboratory
Noise
Toxic
Gas
ment
Air Quality
Quality
Mobile
Mobile
LaboToxic Gas
Sediment
Air
Sampling
&
Meteorology
Analytical
Vibration
Quality
Detection
Sampling
Testing
Laboratories
ratories
Monitoring
Equipment
Testing
Analysis
Analysis
Mobile Laboratories
137
[email protected]
Telephone: +44 (0)1635 872 929
Mobile Laboratories
Meteorology
Toxic Gas
Detection
Air/0/Dust
Noise && Laboratory
Laboratory
Air
Dust
Noise
Mobile
LaboraAir Quality
Quality
Mobile
Air
Vibration
Analytical
Sampling &
Sampling
&
Vibration
Analytical
tories
Monitoring
Laboratories
Monitoring
Monitoring
Equipment
Monitoring
Monitoring
EN95-400
Training
Training
138
[email protected]
Telephone: +44 (0)1635 872 929
Soil /
Sediment
Testing
Analysis
Laboratory Layout
Single Source
Solution...
Wagtech Projects can offer advice and
guidance on a wide range of equipment used in
Environmental Monitoring. Our in-house experts
are always available to help you select the correct
product either from those listed in the catalogue
or by suggesting suitable alternatives.
Installation, Commissioning & Training
Wagtech Projects supplies equipment all over the world, and the importance of both training and technical
support are recognised and as essential in the long term success and sustainability of any project.
Through a well established network of regional offices, agents and distributors, we can offer a range of after sales
services including installation, commissioning and training on the use and maintenance of the equipment.
Equipment Installation and Commissioning
A full Installation and Commissioning service is available
worldwide from Wagtech Projects through its network
of local companies, and fully supported by a team of
scientists and technicians from the UK who regularly
travel to countries around the world supporting our
customers and training our local experts.
In addition to this, product training can be given
at our dedicated Technical and Training Centre in
Thatcham, UK which has a laboratory and training
facilities to handle groups of trainees.
Following successful commissioning of the
equipment, on-going product support is available
locally and via email and phone contact with
experts in the UK if required.
Training
The provision of training has been a key service
from Wagtech Projects for many years and we
continue to offer and expand this facility.
The training can either take the form of detailed instruction in the use and maintenance of the
equipment we supply or we can organise academic training courses in a variety of separate disciplines in the
Agricultural and Environmental Sciences both in the UK and overseas.
These courses can be tailored around customer’s specific
requirements, and at Wagtech Projects we are flexible
enough to be able to accommodate most people’s wishes.
Please contact us for more information on any training
issues you have in mind. We are always pleased to provide
advice on equipment selection, or any technical queries
that you may have.
We look forward to hearing from you.
Telephone: +44 (0)1635 872 929
[email protected]
140
Index
A
D
E
B
F
G
C
H
141
[email protected]
Telephone: +44 (0)1635 872 929
Index
I
R
K
S
L
M
N
O
P
R
Telephone: +44 (0)1635 872 929
[email protected]
142
Index
T
W
U
V
Can’t find what your looking for?
Other Wagtech Projects Catalogues
are available to download online
Alternatively contact us for assistance
Telephone: +44 (0)1635 872 929
Email: [email protected]
143
143
[email protected]
[email protected]
Telephone:
Telephone: +44
+44 (0)1635
(0)1635 872
872 929
929
Terms and Conditions of Business
rms
and Conditions
of Business
d Conditions
ofConditions
Business
Terms
and
of Business
Terms and Conditions of Business
n and construction
Delay:effort
Whilst
every
effort
be made
to will
adhere
Orders:
Noaccepted
order
canunless
beNo
accepted
unless
a
ction
6 Delay: Whilst6every
will
be
made
towill
adhere
order
can be
all
Definition and construction
6
Delay:
Whilst
every
effort
be made13
to Orders:
adhere No 13
13 Orders:
order can
be acc
shall
mean
Wagtech
Projects
to delivery
or dates,
failure
to
maintain
a delivery
necessary have
arrangements
have
been madehave
to t
nller”
Wagtech
Projects
to delivery dates,
delay ordates,
failure
to maintain
a delivery
necessary
arrangements
been made
to the
“The
Seller”
shall mean
Wagtech Projects
to delay
delivery
delay
or failure
to maintain
a delivery
necessary
arrangements
Definition
construction
6orDelay:
Whilst
effort
be
made
adhere
associated
company
or subsidiary
date shall
entitle
therescind
Purchaser
to
rescind
or every
satisfaction
of
the
Seller
regarding
import
and1
dany
company
or subsidiary
date shall not entitle
the not
Purchaser
to
satisfaction
the
Sellerto
regarding
import
andthe Seller
Limited,
anyand
associated
company or subsidiary
date shall
not entitle
the
Purchaser
to rescind
or willof
satisfaction
of
regard
or any duly
appointed
cancel
any order
orpayment
withhold
any
payment
that
and
forof
the
provision
ofthe
payme
“The
Seller”
shallappointed
mean Wagtech
Projects
toor
delivery
dates,
delay
or failure
to
aexport
delivery
pointed
agent.
cancel
any order
or withhold
any
that
may
export
licensesexport
andmaintain
forlicenses
the provision
payment.
thereof
or any agent.
duly
agent.
cancel
any order
withhold
anymay
payment
that
may
licenses
and for
pron
onditions
shall
deemed
to be
be due.
14 to
Terms
of payment:
be deemed
to conditions
be incorporated
of payment:
These
shall
beincorporated
deemed
to be be
incorporated
be due.
14
Limited,
any associated
company
ordue.
subsidiary
date shall not entitle 14
theTerms
Purchaser
rescind
or Terms of payment:
s
ontract
between
the Purchaser
7 Minimum
Order
Value: order
The
minimum
value
(a) Prices
net
and
unless other
term
en
the Purchaser
and
the
7 Minimum
Order
Value: The
minimum
value
(a) Prices
are strictly
netare
andstrictly
other
in
any contract
between
thethe
Purchaser
and
the
7 Minimum
Order
Value:order
The order
minimum
value any
(a)
Prices
areterms
strictly
net and
u
thereof
or any
duly and
appointed
agent.
cancel
any
or order
withhold
payment
thatunless
may
e
nd
shallinbe
construed
inbe
accordance
payment
in advance
or account
£250.00
and isfor
arranged
and
agreed
in writing
by t
strued
accordance
with
for payment
infor
advance
or account
is £250.00
andisfor
have been
and agreed
in writing
by the
Seller
and shall
construedwith
in accordance
with
for payment
in advance
or account
£250.00
and arranged
for have been
have
been
arranged
and agreed
These
conditions
shall
be
deemed
to
be
incorporated
be
due.
1
visions
English
Law
prevailing
onprevailing
or
payment
by letter
of credit
Seller no
beright
allowed.
Thebe
right
sh Law of
prevailing
at, on
payment
of credit
£1000.00.
candeductions
be allowed.
The
is can
the
provisions
oforEnglishat,
Law
at,
on or by letter
payment
by £1000.00.
letter of credit £1000.00. Seller no deductions
Sellercan
no
deductions
allo
in
any
between
the
Purchaser
and the
7The
Order
Value:
The (i)
minimum
order
er has
day been
any
order
has
accepted
theaccepted
8The
Cancellation:
Seller no
shall
beMinimum
under
obligation
tovalue
request
a (i)
remittance
with
an o(
accepted
by
8 Cancellation:
Seller shallThe
under
obligation
reserved
to reserved
request
a(i)remittance
with
an
after
thecontract
daybeen
anythe
order
has by
been
by the
8be
Cancellation:
Sellerno
shall
be under
no
obligation
reserved
to order,
request
a remit
ny disputes
which
may
arise
inconstrued
relation
to aininaccordance
to acceptcancellation
amendment,
or rescission
newinvolved,
accounts
are
involved,
either
to
hich
maySeller
arise
in
relation
tobe
awhich
to accept
or cancellation
rescission
(ii) where
accounts
are
either
to
and
shall
for of
payment
in of
advance
or account
iswhere
£250.00
and
for
h
Seller.
Any
disputes
may arise
relation
to amendment,
a with
to accept
amendment,
cancellation
or rescission
ofnew (ii)
(ii)
where
new
accounts
are inv
t shall
referred
to abe
single
arbitrator
(whoprevailing
any
order
or anyany
part
thereof,
but
may
nevertheless
request
trade
and Banker's
references
or S
red
to be
athe
single
arbitrator
(who
any order
or on
any
part
thereof,
but
may
nevertheless
request
two trade
and two
Banker's
references
or to
contract
shall
referred
to a Law
single
arbitrator
(who
order
or any
part
thereof,
but may
request
two trade
and Banker'
provisions
of English
at,
or
payment
by letter
ofnevertheless
credit £1000.00.
tand
as not
an expert
and
an arbitrator)
in writing
to such
amendment,
or
issue
Pro-Forma
invoices
and interest
(iii)invoices
to charge
as anact
arbitrator)
in
agree ininwritingagree
to such
amendment,
or cancellation
issue Pro-Forma
invoices
and (iii)
to Pro-Forma
charge
shall
asnot
an as
expert
and not asinan arbitrator)
agree
incancellation
writing
such
amendment,
or
issue
andint
(
after
the
day
any order
has been accepted
by the
8toCancellation:
Thecancellation
Seller shall
be under no obligation
r
nce
withaccordance
the
Act
1950 or any
whatever
terms
and
anytime
balance
from
time
to time
outstanding
rbitration
ActArbitration
1950with
or any
rescission
whateverupon
terms
and conditions
it conditions
on any itbalanceon
from
to time
outstanding
and
the Arbitration
Act 1950
or any uponrescission
rescission
upon whatever
terms it
and conditions
on
any
balance
from
time to ti
Seller.
Any
disputes
which
may
arise
in
relation
to
a
to
accept
amendment,
cancellation
or
rescission
of
(
yonmodification
on
re-enactment
thereof
for
chooses
to
impose.
due
to
the
seller
at
5%
per
annum
over
and
ab
re-enactment
thereof
for
chooses
to
impose.
due
to
the
seller
at
5%
per
annum
over
and
above
statutory modification on re-enactment thereof for
chooses to impose.
due to the seller at 5% per ann
contract
shall
be
referred
to a single
arbitrator
(who
any Items
ordercorrectly
or any supplied
partthe
thereof,
butfrom
may
nevertheless
e: being
in
force:
the
decisions
ofthe
such
arbitrator
9 Returned
Goods:
Items
correctly
supplied
the
Base
Rate
from
time Rate
toby
time
charged
bytim
Fr
the decisions
such
arbitrator
Returned
Goods:
Items correctly
supplied
Base Rate
time
to time
Fortis
the
timeof
being
in
force:
decisions
of 9such
arbitrator
9 Returned
Goods:
thecharged
Base
from
time to
final
and
binding
upon
the
partiesupon
to the
against
an orderagainst
butreturned
subsequently
as no to
Bank
S.A./NV. For
purchasers
enjoying
a tradin
ng
upon
the
parties
to
the
but
as
no
Bank
S.A./NV.
For purchasers
enjoying
a trading
shall
be
final
and
binding
the
thean order
an order
butreturned
subsequently
returned
as
no
Bank
S.A./NV.
For purchasers
shall
act
as
an
expert
and
notparties
as against
antoarbitrator)
in subsequently
agree
in writing
such
amendment,
cancellation
or
ie
andbe
his
fees
shall
behis
borne
required
or late
cancelled
to haltupon
delivery,
account
with
the
Seller,
payment
must be
rece
dt in
hisdispute
fees
shall
by and
longer
required
or cancelled
too
to
halttoo
delivery,
account
with and
the
Seller,
payment
mustwith
be received
contract
inborne
dispute
feesby
shall beAct
borne
by
longer
required
orlate
cancelled
too
late
to halt
delivery,
account
the Seller,
payme
accordance
with
the
Arbitration
1950
or longer
any
rescission
whatever
terms
conditions
it
o
y who
at of
thethe
discretion
the
Seller may
at be returned,
by the
30
days date.
of
theIfinvoice
ed
him.appointed
at the discretion
Seller may
bediscretion
returned,
atbe
by the Seller
within
30Seller
dayswithin
ofby
the
invoice
the party him.
who appointed him.
atofthe
of
thereturned,
Seller may
at
the
Seller
within
30 daysdat
of
statutory
modification
on
re-enactment
thereof
for
chooses
to
impose.
d
ptance:
All
orders
received
shall be
Purchasers
expense,
for credit
providing
the providing
payment
has not
been
received
by
thisreceived
time th
ers received
shall be
the Purchasersthe
expense,
for credit
providing
the
payment
been received
by this
timenot
the
1 Acceptance:
All orders
received shall be
the Purchasers
expense,
for credit
the has not
payment
has
been
the
time
being
in
force:
the
decisions
of
such
arbitrator
9
Returned
Goods:
Items
correctly
supplied
t
oodinto
be
placed
in
accordance
with
these
goods
are
in
an
unused
condition
and
in
the
original
Seller
reserves,
in
addition
to
the
rights
above
ed
accordance
with
these
goods
are
in
an
unused
condition
and
in
the
original
Seller
reserves,
in
addition
to
the
rights
above,
the
understood to be placed in accordance with these
goods are in an unused condition and in the original
Seller reserves, in addition to t
ndBusiness.
Conditions
of
Business.
accepting
A restocking
charge
will
be levied
this
right
to suspend
further
supplies
of goods
untB
shall
final
andInbinding
upon
parties
to packing.
the charge
against
an for
order
subsequently
returned
asright
no
of
Inbe
accepting
packing.
A restocking
will
be levied
for
this
right
suspend
further
supplies
ofto
goods
until further
the
Terms
and
Conditions
of Business.
In the
accepting
packing.
A restocking
charge
will
bebut
levied
for to
this
suspend
suppli
ary goods
delivered
by
thedelivered
Seller
theby
service.
returning
anywarehouse,
goods
to required
our
warehouse,
overdue
amount
is cleared.
vered
bycontract
the
Seller in
the
service.
returning
any goods
toBefore
our
overdue
amount
is to
cleared.
proprietary
goods
Seller
the be Before
service.
returning
any
goods
our
warehouse,
overdue
amount is cleared. a
dispute
and
histhe
fees
shall
borne
by Before
longer
ortocancelled
too
late
halt
delivery,
er shall
be
deemed
to accept
the to accept theapproval for such
approval
such
must
be from
first obtained
(b)
from
Purchasers
outside
the United
med
to accept
theshall
actionfor
must
beaction
first obtained
(b) Orders
from
Purchasers
outside
the United
Purchaser
beappointed
deemed
approval
for
such
action
must befrom
first
from
(b)
from
Purchasers
oub
the
party
who
him.
at
the discretion
of obtained
the
Seller
may
beOrders
returned,
atOrders
cturers
Terms
and
Conditions
an identified
of our sales/customer
service
must
covered
by an
and Conditions
of Business
an identified member
of ourmember
sales/customer
service of our sales/customer
Kingdom
must Kingdom
be covered
by be
an
Irrevocable
Letter
Manufacturers
Terms of
andBusiness
Conditions of Business
an identified
member
service
Kingdom
must
beIrrevocable
covered byLe
a
1 Acceptance:
Alldirectly
orderswith
receivedstaff
shall
be staffdown
the
Purchasers
for credit
theprice,
been
dealing
who will
take
in down
event
of our inexpense,
ofproviding
Credit
to cover
the purchase
price,
shippingp
d Purchaser
been dealing
directly
with had
who will take
details
indown
event
of our
to cover
the purchase
shipping
and
as ifhad
the
Purchaser
been dealing directly
with
staff
whodetails
will
take
details
event of
of Credit
our
of Credit
to cover
the purchase
beaddition
placedtointhe
accordance
these
in
unused
condition
and
in
the
original
S
ufacturer
inManufacturer
addition
totothe
conditions
agreeing
to the
return,
you
willgoods
beare
given
other
additional
costs
or charges
by
dition tounderstood
the
conditions
agreeingwith
to the
return, you
willagreeing
then be
given
athen
other
costs
or
charges
confirmed
bycosts
aconfirmed
the
in
conditions
to
the
return,
you
willaan
then
be given
aadditional
other
additional
or charg
ed
so far Any
as
applicable.
other
uniquenumber.
goods return
number.
This
goods
return
Clearing
BankMerchant
(or
a London
Merchant
r asherein
applicable.
other
unique
goods return
This
goods
return
(or
afor
London
Bank
Terms
and
Conditions
of Business.
In accepting
packing.
A restocking
chargeClearing
will London
beBank
levied
this
rB
contained
herein
so farAny
as applicable.
Any
other
unique
goods
return
number.
This goods London
return
London
Clearing
Bank
(or a Lon
f business
areno
excluded
and
noexcluded
variationand
ofby
number must
anyaccompany
goods
andreturning
to the
prior
written
approval
of suchapp
bo
excluded
and
variation
of
number
anyaccompany
goods
and returned
subject
the subject
prior
approval
of
bank written
by
terms
of
business
are
nothe
variation
oftheaccompany
numberreturned
must
any goods
returned
andtogoods
subject
tosuch
the
prior
proprietary
goods
delivered
Sellermust
service.
Before
any
towritten
our
warehouse,
erms
conditions
shall
bind the seller
be included
in any
sent
to us. If you
omit us. the
theother
Seller)arrangements
unless other
arrangements
be
tions and
shall
bindterms
the seller
beseller
included in any
paperwork
sent
to us. Ifinyou
omit
Seller)
have
beenotherhave
these
and conditions
shall to
bindaccept
the
be paperwork
included
any
paperwork
If you
omitunless
Seller)
unless
arrange
Purchaser
shall
be deemed
the
approval
for sent
suchtoaction
must
be first obtainedthe
from
(
made
in writing
and
signed
by aand
Director
ofby a Director
include
this
number
thethis
returned
will not goods
made
and agreed
in writing.
Letters
of Credit
and signed
by made
a
Director
of
to include
number
the
returned
goods
will
not goods
made
and agreed
in writing.
Letters
of Credit
unless
in writing
signed
of this to
to include
number
the returned
will not
made
and
agreed
in writing.
Le
Manufacturers
Terms
and
Conditions
of
Business
an
identified
member
of
our
sales/customer
service
pany
with
whom
the
order
is
placed.
be
accepted
by
the
seller
and
will
be
returned
to
should
allow
for
part
payments
and
shipments
m the order
is placed.with whom the order is placed.
be accepted by the seller and be
willaccepted
be returned
to seller and will be returned
shouldtoallow for part paymentsshould
and shipments
and paymentsK
the company
by the
allow for part
as
if the
Purchaser
had
dealing
directly
with
staff
who
will take
down
details
ofofour
sWhere
on Approval:
Where
the SellerWhere
has been
you at your
expense.
returned
goods
must
inevent
the case
orders
chemicals
shoulo
the
Seller
has
you at
your expense.
All returned
must
in
the
case ofinorders
including
chemicals
2 Goods
on
Approval:
the Seller
has
you goods
atAll
your
expense.
All returned
goods
must
in
the including
case should
of orders
including
with to
thesupply
Purchaser
supply
goods
the togoods
include all
accessories
e.g.
AC/DC
adaptors.
Once
permit
or special
aser
goods
to
the
include
all accessories
e.g.
AC/DC
adaptors.
Once
permit
deck
special
stowage.
agreed
withto
the
Purchaser
totosupply
to the
include
all accessories
e.g.to
AC/DC
adaptors.
Once
deck or special stowage
the
Manufacturer
in addition
the
conditions
agreeing
the return,
you
will or
then
bedeck
given
apermit stowage.
o
er for the
Purchaser's
approval
to
approval
for the
return
given,has
thebeen
goods
15
Delivery
and15
delay:
All orders
for overseas
haser's
approval
prior
to
approval
forother
the
return has
been
given,has
thebeen
goods
15 goods
Delivery
and
delay:
All
orders
for
overseas
Purchaser
forherein
the
Purchaser's
approval
prior
toAny
approval
for
the
return
given, the
Delivery
and delay:
All ordeL
contained
soprior
far as
applicable.
unique
goods
return
number.
This
goods
return
nce
then
if decides
the Purchaser
he doesdecides
must
by the
seller within
3 weeks.
shipmentinare
accepted
in are
accordance
the
Purchaser
he
does
mustdoes
be received
bybe
thereceived
sellermust
within
weeks.
shipment are accepted
accordance
with
the
acceptance
then
ifdecides
the Purchaser
be3received
by the
seller within 3 weeks.
shipment
acceptedwith
in acco
terms
ofmust
business
are
excluded
andheno
variation
of
number
must
accompany any goods
returned
and
s
uire
the not
goods
he
return
them
at his
10 Warranty:
are only
guaranteed
to the
conditions
herein
before
contained,
it being
he must
return
them
atgoods
his
10 Warranty:
Goods
are onlyGoods
guaranteed
to Goods
the
herein
before contained,
it being
require
the
he
must
return them
at his
10 Warranty:
are only
guaranteedconditions
to the
conditions
herein before
conta
these
terms
and
conditions
shall
bind
the
seller
be
included
in
any
paperwork
sent
to
us.
If
you
omit
t
pense
the
Seller
in
good
order
and
condition
extent
of
the
guarantee
(if
any)
given
to
the
Seller
understood
and
agreed
that
delivery
time
is
th
eller into
good
order
and
condition
extent
of
the
guarantee
(if
any)
given
to
the
Seller
understood
and
agreed
that
delivery
time
is
the
own expense to the Seller in good order and condition
extent of the guarantee (if any) given to the Seller
understood and agreed that de
unless
made
inwhich
writing
and which
signed
a actual
Director
of actual manufacturers,
toother
include
this
number
the returned
goods
willby
not
0 days
of
receipt
failing
thefailing
Purchaser
by the
all
conditions,
Seller's
of
theestimate
time
which
can by
hm
ipt
failing
which
the
Purchaser
byby
the
manufacturers,
all
conditions,
Seller's
estimate
of
theestimate
time
which
it
canby
have
within
30
days
of
receipt
the
Purchaser
byother
the actual
manufacturers,
all other
conditions,
Seller's
of theittime
deemed
to have
accepted
goods
within
statements
warranties,
express
or implied,
goods
and
ready
for dispatc
ve
accepted
the
goods
within
statements
warranties,and
express
or implied,
necessary
and
ready
for dispatch.
shall
be deemed
to the
have
accepted
goods
within and
statements
and
warranties,
express
or implied,
necessary
goods
packed
and re
the
company
with
whom
the the
order
is placed.
be
accepted
by the
seller
and goods
willnecessary
bepacked
returned
topacked
s
ms
Conditions
hereof
and shallhereof
be
statutoryonorthe
otherwise
the
part
of the
Seller
areof theThe
Theaccept
Seller cannot
accept
responsibility
for
onsand
hereof
and
shall
beConditions
statutory
or otherwise
part of on
theor
Seller
are
Seller
any responsibility
for
theGoods
Terms
and
and
shall
be has
statutory
otherwise
the
part
Seller
are cannot
The
Seller any
cannot
accept any
ri
2
on
Approval:
Where
the
Seller
you
at on
your
expense.
All
returned
goods
must
o
payaccordingly.
for
the same
accordingly.
hereby excluded.
delays
in despatch
caused
throughcaused
non-availab
ame
delays in despatch
caused
through
non-availability
bound
to pay
for the same accordingly. hereby excluded.
hereby excluded.
delays
in despatch
thro
agreed
with
the
Purchaser to supply
goods to11the
include all accessoriesofe.g.
AC/DCofadaptors.
Once
p
: All are
quoted
prices
ex-warehouse
Title:
shipping
space
and/or
other
causes
beyond
ices
11 Title:
shipping space
and/or other
beyond
3ex-warehouse
Prices:
Allare
quoted
prices are ex-warehouse
11 Title:
ofcauses
shipping
space
and/or
other
Purchaser
for
the
Purchaser's
approval
prior
approval
the
return
been given,
the goods
1
xpressly
specified
toand
theare
contrary
and
arecontrary
(a)
Thesold
titleto
in the
goods
the
Purchaser
the
its control.
fied
to the
contrary
(a)and
Theare
title into
goods
the
its has
control.
unless
expressly
specified
to
the
(a) Purchaser
Thesold
titletoinby
goods
sold for
toby
the
Purchaser
by the
its control.
to
alteration
without
notice.
The
Seller
Seller
shall
pass
the not
Purchaser
until
all
sums by
16 Damage
Loss
in transit
ithout
notice.
The
Seller
notdoes
pass to
thenot
Purchaser
until
all must
sumstobe
16allDamage
and/or
Loss
in and/or
transit
and Insurance:
acceptance
then if
the
Purchaser
decides
the
seller
3 weeks.
s
subject
to alteration
without
notice. TheSeller
Sellershall he
Sellertoshall
pass
thereceived
Purchaser
until
sums within
16 Damage
and/orand
LossInsuranc
in tran
s the right
torequire
invoice
goods
atinvoice
prices
prevailing
to the
from
the Purchaser
(whether
in
(a) the no
Seller
accepts
responsibility
for
gooc
nvoice
goods
at
prices
prevailing
due to
the Seller
from
theSeller
Purchaser
in
(a) the
accepts
responsibility
for
goods
reserves
the right
to
atreturn
prices
prevailing
due
to (whether
Seller
from
the Purchaser
(whether
inSeller
(a) theno
Seller
accepts no
respo
not
the
goods
hegoods
must
them
atdue
his
10
Warranty:
Goods
are
only
guaranteed
to
the
ate
of value
despatch
plus
taxvalue
(if added
respect
goods have
or those
otherwise)
been
shipped
uninsured
and
shall
not
obliged
h plus
added
tax
(if added
respect
those
goodsoforthose
otherwise)
beengoodshave
shipped
uninsured
and shall
not
be
obliged
to beand
at the
date
ofvalue
despatch
(if of
respect
of
or otherwise)
have
been
shipped
uninsured
shall to
nou
own
expense
to the plus
Seller
in good tax
order
and condition
extent of
the guarantee
(if any) given to the Seller
ate) at appropriate)
the
appropriate
rate.
paidIfto
the
Seller.
If defaults
thethe
Purchaser
in paying
claim
in respect
of damage
or the
loss
where, at
propriate
rate.
paid to the Seller.
the
Purchaser
in paying
claim
in respect
of damage
or claim
loss
where,
at
at the
appropriate rate.
paid
to
Seller.
Ifdefaults
the Purchaser
defaults
in paying
in respect
of damage
orth
within
30todays
of receipt
which
the Purchaser
by Seller
the actual
manufacturers,
allrequest,
other
conditions,
S
tions: are
All
are
to arefailing
any Seller
such sum
Seller
be
to take
Purchaser's
request,
insurance
arrangements
ations
subject
shall the
be
entitled
to take
insurance
arrangements
have
4 quotations
Quotations:
All subject
quotations
subjectany
to such sum the
any
suchshall
sum
theentitled
shall
be entitled Purchaser's
to take
Purchaser's
request,
insuranceh
shall
becorrect
tocorrect
have
accepted
theaction
goods
within
statements
and
warranties,
express
ormade
implied,
The
right
is deemed
reserved
to
any to correct
such
action
against
the
as
it may
be
entitled
been
than
the
Seller's
ownthe
open
cn
tation.
is reserved
to
any
such
against
the Purchaser
itPurchaser
may
be
entitled
been
other
than
the other
Seller's
own
open
cover
confirmation.
The
right
is
reserved
any
suchas
action
against
the
Purchaser
as
it may
bemade
entitled
been
made
other
than
Selle
rto
omission
and
to
re-quote
at prices
prevailing
or in equity
without
reference
with
for
the insurers
time being.
re-quote
ator
prices
prevailing
in
law
or in equity
without
further
reference
to
with
insurers
forit's
theinsurers
time
being.
the
Terms
and
Conditions
hereof
and
shall
bein law
statutory
ortootherwise
on
the
part
of
the
Seller
areit's
T
errors
omission
and
to re-quote
at prices
prevailing
in law
or in further
equity
without
further
reference
toit's
with
for the time b
ate
despatch
in accordance
with
Section
Unless
the Seller
is specifically
instructed
h in of
accordance
with
the Section
Purchaser. the Purchaser. the Purchaser. hereby excluded.
(b) Unless the (b)
Seller
is specifically
instructed
otherwise,
at the date
ofSection
despatch
insame
accordance
with
(b) Unless
the Seller
is specifico
bound
to
pay
for the
accordingly.
d
f.
A quotation
expressed
to beexpressed
for a fixedto be for
(b) The
shall
the
right
titleright
in before
goods will
insured
only
against
lossonly
or dama
expressed
to be
for
a fixed
(b)aThe
shallPurchaser
have the
before
title
in before
goods
willinbe insured
onlybe
against
loss
orbe
damage
3 hereof.
A quotation
fixedPurchaser
(b)right
The have
Purchaser
shall
have the
title
goods
will
insured
agai
3
Prices:
All
quoted
prices
are
ex-warehouse
11
Title:
o
mains
open
acceptance
by the
goods
passed,
to resell
the goods
or any
in transit
for the
value
acceptance
by
the open for
the goods has the
passed,
to has
resell
thegoods
goods
or passed,
any
in or
transit
C.I.F value
plus
10%.
pricefor
remains
acceptance by the
the
has
to resell
the goods
any for the
inC.I.F
transit
forplus
the 10%.
C.I.F value plu
unless
expressly
to in
the
contrary
are
(a)
The
title
in Seller
goods
sold
theunder
Purchaser
by
the
er within
the in
period
stated
the quotation
part
thereof
shall
paythe
tobut
the
Seller
the
(c)
Allthe
claims
under
theclaims
Seller's
insurance
musi
eriod
stated
the
quotation
thereofand
but
shall
pay tobut
the
Seller
proceeds
(c)
All to
claims
Seller's
insurance
must
be the Seller's
Purchaser
within
theinspecified
period
stated
thepart
quotation
part
thereof
shall
pay
toproceeds
the
the
proceeds
(c)
All
under
subject
to
without
notice.
The
Seller
not
pass
to
the Purchaser
all sums
period
is
stated,
within
days of
the date
sale
or such
thereof
asSeller
mayto
beshall
necessary
tobe necessary
notified
in Seller
writing
to the
45 Seller
days1
ed,
within
of alteration
the
date
of
or
suchof
part
thereof
aspart
may
beornecessary
notified
intowriting
tountil
the
within
45
dayswithin
from
or,30
if days
no period
is30
stated,
within
30 days
ofsale
the
date
of
sale
such
part
thereof
as
may
notified
inSeller
writing
to the
uotation
ofright
when
theinvoice
quotation
paytoallthe
sums
duepay
to all
the
Seller
from
Purchaser
point(whether
of discharge.
ective of
when
thethe
quotation
pay
all prices
sums due
Seller
from
the
Purchaser
point
discharge.
ofirrespective
the quotation
irrespective
of when
the
quotation
sums
due
to the
Seller
from the
Purchaser
point
reserves
to
goods
at
prevailing
due
to the
Seller
from
theof
Purchaser
in of discharge.
(
ed by the
Purchaser.
payment
shall
the proceeds
ofthe proceeds
17 Import
Licenses:
Where
applicable,
the app
haser.
and until such payment
shall hold
of
17 Import
Where
applicable,
the
is received
by of
thedespatch
Purchaser. plus value
and the
untilproceeds
suchhold
payment
shall
hold
of Licenses:
17 Import
Licenses:
Where
at
the date
added tax and
(if until such
respect
of those
goods
or otherwise)
have
been
s
ry:effort
Whilst
every
is made
adhere
to to
sale
trust forsale
theon
Seller.
Purchaser's
order
must
specify
the
number,
da
y
made effort
to Whilst
adhere
to to
sale
on trust
theonSeller.
Purchaser's order
must specify
the
number,
date
of
5isDelivery:
every
effort
is made
adhere
to for
trust for the Seller.
Purchaser's
order
must
specify
appropriate)
at
the
appropriate
rate.
paid
to
the
Seller.
If
the
Purchaser
defaults
in
paying
dates,
no
liability
whatsoever
canwhatsoever
be
(c) Notwithstanding
subclause
(a) of
this clause,
expiry
and
valueexpiry
of theand
Import
It shallc
ity
whatsoever
can
be no liability
(c)be
Notwithstanding
subclause(c)
(a)Notwithstanding
of
this clause,
the
and
value
of the
Import
License.
Itvalue
shallLicense.
be
delivery
dates,
can
subclause
(a)the
of thisexpiry
clause,
the
of the Import
4
Quotations:
All quotations
arehowsoever
subject
tobe goods
any
such
the
shall
be entitled
to take
d for
lateness
ofhowsoever
non-delivery
howsoever
be at
the
risk
fromsum
the time
the
Purchaser's
responsibility
toresponsibility
obtain all nectP
of
non-delivery
goods shall
at the shall
Purchaser's
riskPurchaser's
frombe
the
thethe
Purchaser's
responsibility
to
obtain
all necessary
accepted
for lateness
of
non-delivery
goods
shall
at time
the
Purchaser's
riskSeller
from
time
the
Purchaser's
Deliveries
offered
ex-stock
areright
subject
to are subject
they
delivered
toare
thedelivered
Purchaser.
Import
ed ex-stock
areDeliveries
subject
to
they
the
Purchaser.
Import
Licenses.
confirmation.
The
is reserved
toare
correct
anytoare
such
against the
Purchaser
as it Licenses.
may beImport
entitled
b
arising.
offered
ex-stock
todelivered
they
to action
the Purchaser.
Licenses.
eing
unsold
the
of receipt
of
12
Dangerous
and poisons:
Chemicals
18
Bank
Charges,
Documentation,
Feew
the date
of at
receipt
of
the
12of
Dangerous
chemicals
and chemicals
poisons:
Chemicals
18 Bank
Charges,
Special
Documentation,
Fees Special Docu
goods
being
unsold
at and
the date
of receipt
the
12 Dangerous
chemicals
and
poisons:without
Chemicals
Bank Charges,
errors
or date
omission
tothe
re-quote
at
prices prevailing
in law or
in equity
further
reference
to18Special
ers
order.
The seller
reserves
right
to
should
handled
andtrained
used
only by
trained
Duties:
Allbank
consular
andAll
bank
charges,
seller
reserves
right
be handled
andbe
used
only
by
and Duties: Alland
consular
and
import
Purchasers
order.
The the
seller
reserves
theshould
right to
should
be
handled
used only by trained
and charges,
Duties:
consular
andimp
ba(
at
the the
date
oftodespatch
in accordance
with Section
theand
Purchaser.
or delivery
unless
agreed
and
personnel
or under
appropriate
No supervision.
and customs
and anyfrom
taxes
from
ess
otherwise
agreed
and unless
personnel
appropriate
supervision.
Nosupervision.
andNo
customs duties
and anyduties
taxes
arising
orarising
charge
for otherwise
delivery
otherwise
agreed
and or under
personnel
or under
appropriate
and customs
duties
and any
ta
A
expressed
to
be for a fixed
(b)for
The
Purchaser
the
right
before
in andthe
g
n
writing
inhereof.
respect
of quotation
individual
transactions.
responsibility
orresponsibility
liability
whatsoever
is accepted
for isshall
bycontract
virtue
ofand
thetitle
contract
its
settlement
pect
of 3
individual
transactions.
liability whatsoever
is accepted
by have
virtue
of the
its
settlement
are
the
stated
in writing
in respect
of individual responsibility
transactions. or
or liability
whatsoever
accepted
for
by
virtue of
contract
andar
it
open
for acceptance
the
the
has passed,
to resell
goods
or Purchaser
any
for
anyprice
loss
orremains
damage
in
transit
arising
out loss
ofuse
the
usethe
or storage,
handling
liability
of unless
the
specifically
agri
damage
in transit
loss
arisingany
outloss
of the
storage,
orstorage,
handling
liability
of thethe
Purchaser
specifically
Liability
for any loss
or damage
in transitanyby
any
arising
out goods
of
use or
handling
liability
ofunless
theagreed
Purchaser
unless
ver
caused
is not
under
anyiscircumstances
of chemicals
howsoever
caused.
Thethereof
sale
of poisons
in Seller.
writing
byproceeds
theinSeller.
ot under
any
circumstances
of in
chemicals
howsoever
caused.
sale
ofhowsoever
poisons
by the
Purchaser
within
the
period
stated
the quotation
part
but
shall
to the
Seller
the
(
howsoever
caused
not under
any
circumstances
of The
chemicals
caused.
The
saleinpay
ofwriting
poisons
writing by the Seller.
d to theor,
Seller.
isthe
regulated
by and
the
Pharmacy
Poisons
is regulated
Pharmacy
Poisons Act
admitted
the Seller.
is regulated
byand
thesale
Pharmacy
and part
Poisons
Act
if no to
period
is stated, within 30
days of by
the
date
of
or Act
such
thereof
as may be necessary to
n
1933,
the
Poisons
Listthe
and
theand
Poison
and
1933, the Poisons
List
and
the1933,
Poison
Rules
Poisons
List Rules
and the
Poison Rules and
of the quotation irrespective of when the quotation
pay
all
sums
due
to
the
Seller
from
the
Purchaser
p
amending
fromlaid
time
time
laidtime
or made
amending legislation
fromlegislation
timeamending
to time
or to
made
legislation
from
to time laid or made
is received by the Purchaser.
and
until
such
payment
shall
hold
the
proceeds
of
1
by any
competent
authority.
by any competent
authority.
by any competent authority.
5 Delivery: Whilst every effort is made to adhere to
delivery dates, no liability whatsoever can be
accepted for lateness of non-delivery howsoever
arising. Deliveries offered ex-stock are subject to
goods being unsold at the date of receipt of the
Purchasers
order. The
reserves
right to
Telephone:
+44seller
(0)1635
872the
929
charge for delivery unless otherwise agreed and
sale on trust for the Seller.
(c) Notwithstanding subclause (a) of this clause, the
goods shall be at the Purchaser's risk from the time
they are delivered to the Purchaser.
12 Dangerous chemicals and poisons: Chemicals
should be handled and used only by trained
[email protected]
personnel or under appropriate supervision. No
144
P
e
t
I
1
a
a
International Network
Office, Agents and Distributors
Wagtech Projects has its own offices, authorised dealers or distributors in many countries throughout the world.
All of them have the necessary skills and relevant experience to provide you with a wide range of
services from providing equipment, spares, consumables and reagents to full after sales service
and technical support.
Contact us for details of your nearest appointed agent or distributor.
C 2012 Wagtech Projects
This catalogue is a copyright and no part of it may be produced, photocopied or stored in any
data retrieval system without permission.
Catalogue Developed and Produced by Wagtech Projects.
Designed by Guy Wintgens.
Every effort has been made to ensure that the descriptions given in this catalogue were correct at
the time of going to press, but we accept no liability for any error and the specifications are
subject to change without prior notice.

Contents - Wagtech Projects Ltd

Transcription

Similar documents

6734-2 CS6000 Leaflet

South Towne Expo Center - The Great Salt Lake Business Conference

South Towne Expo Center and Salt Palace

Technical Sheet - Microbes Biosciences

GilAir Plus Next Generation Universal Air Sampling Pumps

CS6000 - TekPro

Azomite - naturesfootprint.com

KleenOil Program - Oil Filtration Services

2011 Bil Jac Sponsorship Flyer