Ermanno Santilli, CEO MagneGas Maria Zack, President Strollo Group

Transcription

Ermanno Santilli, CEO MagneGas Maria Zack, President Strollo Group
Ermanno Santilli, CEO MagneGas
Maria Zack, President Strollo Group
1 1
• Patented technology gasifies or sterilizes a variety of
feedstocks, producing a hydrogen-based fuel called MagneGas
• Company founded in 2007, Trading on NASDAQ.CM since
August 2012
• Chairman and Chief Scientist, Dr. Santilli, former Harvard and
MIT scientist who developed MagneGas
• Carter Administration Grant Seeded 30 years of Development
• The Company earns revenue from clean fuel sales (domestic)
and big-ticket sales of equipment and royalties (international)
• Growth is expected in sales of fuel for in metal cutting and
electricity generation and through strategic partnerships with
GM and Navy to Gasify liquid wastes for onsite consumption
2
Tes$ng 3
MagneGas
Tech Scout
Authorized
Distributor
Joint
Venture
Regional
Headquarters
Current Operating Units:
USA: Florida (2) Michigan (2)
International: Beijing (1), Italy (2)
4
5
MagneGas System
6
Versatile Gas:
•  Metal Cutting
•  Transport fuel
•  Heating & Cooking
Sterilized Liquids:
•  Sewage to Irrigation
Water
•  Manure to Fertilizer
•  Hospital Wastes
Liquid Elimination:
•  Pumpable FOGS
•  Individually or Mixed
Power Generation:
•  Electricity Generation
•  Co-Combustion
7
Inherent Advantage:
•  No Smoke
•  Low Noise
•  Gas Ready to Use
•  No Dewatering
Versatile Units:
•  Remote Operation &
Diagnostics
•  Sizable / Stackable
•  Mobile
Financial:
•  Priced $1.7m 300kw
•  Produces 18m cft MagneGas
•  Target 2 Year Payback
8
Taking the show on the road with
the MagneGas Mobile Demo
Platform
9
10
Sterilized Water & Liquid Fer1lizer •  MagneGas fuel, Sterilized water and
Liquid Fertilizer is a byproduct of
processing sewage or manure
•  The Plasma Arc FlowTM process
sterilizes bio-contaminants in the liquid
•  Downstream centrifuge separates sludge
from water
•  Meets EU regulations to be used as
irrigation water
•  MagneGas is a byproduct
Also suitable for medical liquid wastes
11
Transport Use – Interchangeable with
CNG, other engines convertible
Industrial Vehicle Use –
Ultra low emissions allow
use indoors
Hydrogen Market - MagneGasTM
contains 50% or more of
Hydrogen that can be separated
12 12
Metal Working - Direct replacement for
acetylene, safer & more productive
Heating & Cooking - MagneGasTM
is interchangeable with natural gas
Co-Combustion – 10,000F high
flame temperature improves
efficiency of existing hydrocarbons
fuel systems
13 13
Official EPA Laboratory Test Results without Cataly1c Converter (LIPHARDT & ASSOCIATES)
Element
MagneGasTM
EPA Standards
Hydro-carbons
(gm/mil)
0.199
0.41
Carbon Monoxide
(gm/mil)
2.750
3.40
Nitrogen Oxides
(gm/mil)
0.642
1.00
Carbon Dioxide
(gm/mil)
266
No EPA standard
9%-12%
No EPA standard
Oxygen
MagneGas Meets EPA requirements without Catalytic Converter
14 14
Natural Gas
Emission report using identical car in Italy
15
Attributes
Acetylene
MagneGas
Welders report that MagneGasTM cuts cleaner and
faster, produces higher quality cuts with a narrower
kerf1, less slag, no top edge rollover and a smaller
heat affected zone.
[Source:
Welding Journal]
1Definition: the width of the groove made by the torch.
Note 1: Price increase estimate according to
J&M Acetylene Manufacturing Co.
16 16
•  MagneGas now is able to provide a complete solution
to its customers, selling Oxygen, Nitrogen, Argon,
Other Fuels and Hard Goods
•  Margins from 30% to 300% on resell products
•  Contract with Matheson signed Q1 2013
17 17
• MagneGas™ providing fuel for metal cutting at
recycling facilities in Flint, MI.
• MagneGas recycler installed on-site
• MagneGas has signed a preliminary contract with
Seattle Based Distributor, Sustainable Green
• MagneGas recycler to be placed on site to service
Distributor and provide fuel to Navy testing
18
• Some fire departments have up to three different
cutting systems on their fire and rescue trucks
• MagneGas can potentially replace all three
• Lighter equipment & faster cutting is value proposition
• Testing is underway at fire departments in two states
19 19
• Phase 1: Following 18 months of testing MagneGas is
being used as a metal cutting fuel by GM
• Phase 2: MNGA is testing liquid wastes to identify
suitable feedstock for MNGA and internal GM projects
• Phase 3: Hydrogen Separation / Transport Applications
20 20
 Edison Welding Supply has completed their laboratory
testing and has selected MagneGas from seven different
gases for the final two for on-site testing.
 Originally project was to find a safer alternative to acetylene
due to risk of explosion and carcinogenic effect of smoke.
 MagneGas allows for reduced opacity and FOGS recycling.
21
• Contract for 300Kw unit for $2.7 MM with an option to
purchase additional 5 refineries. MNGA will receive a
5% - 10% royalty on gross revenues (to be signed)
• Gasifying PCB laced oil and generating electricity is
the first target application.
22
23 23
Ermanno Santilli, CEO MagneGas
Maria Zack, President Strollo Group
24 24
25
26
27
28