specifications - YEONG CHIN MACHINERY INDUSTRIES CO., LTD

Transcription

SPECIFICATIONS
FV56T
SPINDLE
FV56A
FV85A
15,000rpm
Spindle Speed (opt.)
Spindle Taper
Front Bearing Diameter
5.5/7.5/11/15kW 7/10/15/20HP (7.5/11/15/22kW 10/15/20/30HP)
(cont./30min./10min./5min.)
(cont./30min./10min./5min.)
BT30
ø45mm ø1.77"
TRAVEL
BBT40
ø70mm ø2.76"
560mm 22.05"
410mm 16.14"
450mm 17.72"
X-axis Travel
Y-axis Travel
Z-axis Travel
Distance Between Spindle
Nose & Table Top
850mm 33.46"
110~560mm 4.33"~22.05"
3 x 14mm x 100mm 3 x 0.55" x 3.94"
300kg 661 lb
FEEDRATE
1,270mm 50"
105~645mm 4.13"~25.39"
1,000 x 520mm
1,120 x 520mm
1,350 x 520mm
39.37" x 20.47"
44.09" x 20.47"
53.15" x 20.47"
5 x 18mm x 100mm 5 x 0.71" x 3.94"
500kg 1,102 lb
1,000kg 2,205 lb
700 x 420mm 27.56"~16.54"
T-Slots × Size × Pitch
Max. Load on Table
1,020mm 40.16"
520mm 20.47"
540mm 21.26"
150~690mm 5.91"~27.17"
TABLE
Table size
FV125A
10,000rpm (12,000/15,000rpm )
5.5/7.5/11/15kW
7/10/15/20HP
2.2/3.7kW 3/5HP (cont./15min.)
Spindle Power (opt.)
FV102A
24/24/24 m/min.
945/945/945ipm
36/36/24 m/min. (48/48/48 m/min.)
36/36/24 m/min. 1,417/1,417/945ipm
1,417/1,417/945ipm (1,890/1,890/1,890ipm)
1~10,000mm/min. (0.04~394ipm)
Rapid Feedrate
Cutting Feedrate
ATC
Tool Magazine Capacity
Max. Tool Weight (per piece)
Pull Stud
Max. Tool Dimensions
Max.Tool Dimensions
(Without adjacent tools)
Tool Changer Method
Tool Selection Method
16T (20T)
4kg 8.8 lb
MAS-P30T-1
ø63 x 200mm
ø2.48" x 7.87"
20T
24T (30T)
6kg 13.2 lb
MAS-P40T-1
ø90mm x 300mm (ø76mm x 300mm)
ø3.54" x 11.81" (ø2.99" x 11.81")
ø90mm x 250mm
ø3.54" x 9.84"
ø100mm ø3.94"
ø125mm ø4.92"
Arm Type
Random
Arm Type (Armless Type)
Random (By Sequence)
GENERAL
Pneumatic Supplier
Power Consumption (std.)
Machine Weight
16kVA (17kVA)
2,800kg 6,173 lb
3,000kg 6,614 lb
5.5kg/cm2 78.2psl
25kVA (30kVA)
5,350kg 11,795 lb
5,260kg 11,596 lb
6,700kg 14,771 lb
Note: The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without notice. All the specifications shown above are just for reference.
PULL STUD TOOL SHANK
48.4 1.91”
22 0.87”
70.4 2.77”
45°
Taper 7/24
65.4
2.57”
M16 x 2P
ø53 ø2.09”
ø44.45 ø1.75”
M12 x 1.75P
30°
28 1.10”
ø17
ø0.67”
MAS-P40T-1
Ball Diameter
ø10 ø0.39”
3
0.13”
ø12.5 ø0.49”
18 0.71”
ø9.5 ø0.37”
ø7
ø0.28”
ø11 ø0.43”
ø16.5 ø0.65”
ø46 ø1.81”
ø38 ø1.5”
ø31.8 ø1.25”
16 0.63”
2.5 0.1”
2 0.08”
25
0.98”
ø15
ø0.59”
5 0.2” 0.16”
3.5 0.14”
Taper 7/24
1-0.005
M16 x 2P
43 1.69”
4 3 0.12”
23 0.91”
0.31”
M12 x 1.75P
ø0.49”
BBT40
ø10 ø0.39”
ø23
ø0.90”
MAS-P30T-1
ø63 ø2.48”
ø75.7 ø2.98”
BT30
35 1.38”
4
5
0.19” 0.16”
60 2.36”
16.6
0.65”
ACCESSORIES
Tool Kit
Work Lamp
Pilot Lamp
Coolant Gun
Coolant Equipment System
Cuttng Air Blast
Spindle Air Blast
Spindle Air Seal
Central Lubrication System
Oil Skimmer
Coolant Through Spindle System
Foundation Bolts
Leveling Blocks and Bolts
Oil-Mist Coolant System
Oil Hole Holder Function
Chips Flush Coolant System
Chip Conveyor
Workpiece Measurement System
Heat Exchanger for Electrical Cabinet
A/C. Cooler for Electrical Cabinet
●
●
●
●
●
●
●
●
●
●
○
●
○
○
○
○
●
○
●
●
●
●
●
●
●
●
●
●
○
○
●
○
○
○
○
○
●
○
●
●
●
●
●
●
●
●
●
●
○
○
●
○
○
○
○
○
●
○
●
●
●
●
●
●
●
●
●
●
○
○
●
○
○
○
○
○
●
○
●
●
●
●
●
●
●
●
●
●
○
○
●
○
○
○
○
○
●
○
Mechanical, Electrical & Operating
Manuals
Rigid Tapping
Guideway Cover (X,Y,Z)
Optical Scale
Automatic Door
Safty Door
4th Axis Rotary Table
Spindle Cooling System
Heavy Duty Coolant Pump
Auto Tool Length Measurement
System
Full Chip Enclosure
Circular Coolant Nozzle
Screw Type Chip Conveyor
Air Gun
Automatic Power Off Device
Hydraulic System
Oil-Mist Collector
CNC Controller: MXP-200FB
CNC Controller: MXP-200FC
●
●
●
●
●
●
●
○
○
●
○
○
○
●
●
○
○
●
○
○
○
●
●
○
○
●
○
○
○
●
●
○
○
●
○
○
○
●
●
○
○
●
○
○
○
○
○
○
○
○
●
○
●
○
○
○
●
○
●
○
●
○
○
○
●
○
●
○
●
●
○
○
○
●
○
●
○
●
●
○
○
○
●
○
●
○
●
○
○
○
●
○
FP
/ High Precision Graphite Vertical Machining Center
FP55LX, FP66A, FP100A / FP66G
FV
FV56T, FV56A, FV85A, FV102A, FV125A / FV50T
XV
XV560A, XV1020A, XV1250A
NXV
High Precision Die & Mold Vertical Machining Center
NXV1020A, NXV1020AM
TV
TV116B, TV146A/B, TV158B, TV188B, TV2110B, TV2610B
NTV
High Efficiency T-base Vertical Machining Center
NTV158A/B
MV
MV66A, MV76A, MV86A, MV106A
WV
WV108A/B
FX
High Performance
FX380A
NSV
NSV66A, NSV85A, NSV102A, NSV156A
NDV
NDV66A, NDV85A, NDV102A
NBX
High Performance Swivel Head 5-axis Vertical Machining Center
NBX102A
TCV
TCV2000A, TCV3000A, TCV3000A-5AF, TCV3000A-5AX
DCV
DCV2012A/B, DCV2016B, DCV3016B, DCV4016B, DCV3021B, DCV4021B, DCV5021B, DCV6021B, DCV3025B, DCV4025B, DCV5025B,
DCV4035B, DCV5035B, DCV6035B, DCV4030B, DCV5030B, DCV6030B, DCV4030B-5AF, DCV5030B-5AX, DCV6030B-5AX, DCV4030B-5AF
NDC
High Performance Double Column Vertical Machining Center
NDC2016B, NDC3016B, NDC3016B
H
H500A/B, H630B, H800B, H2612B
NH
High Speed High Precision Horizontal Machining Center
NH450A, NH630B, NH800B
HBM
Horizontal Boring Milling Machining Center
BMP
BMP1416B
NT
High Accuracy Heavy Duty Boring Machine
High Performance Mill-axis Mill/Turn Center
NT-2000Y/SY, NT-2500Y/SY
GT
GT-200A/B/MA, GT-250A/B/MA/MB, GT-300A/B/LA/LB/MA/MB/LMA/LMB, GT-380A/B/LA/LB
TC
TC-16A/B/LA/LB/MA/MB/LMA/LMB, TC-26, TC-26L, TC-36, TC-36W, TC-46, TC-46M
Remote Monitoring System
A remote monitoring system
YEONG CHIN MACHINERY INDUSTRIES CO., LTD.
888 Homu Road, Shengang District, Taichung, Taiwan
022013-E09-1000
High Speed High Performance Machining Vertical Center
HIGH SPEED HIGH PERFORMANCE
MACHINING VERTICAL CENTER
The YEONG CHIN FV-Series
High-Speed, High-Power Vertical Machining Centers are specially designed for
industries that demand high precision, high productivity application such as automotive,
aerospace, electronic, and job shop industries.
With our unique IDD (Isolated Direct Drive)
Spindle Design and our ultra-wide, ultra-rigid internally ribbed construction, our FVSeries delivers exceptional cutting finish and accuracy.
With the addition of ATC system that changes tool-to-tool in 1 second for 30# spindle,
and 3.5 seconds for 40# spindle, the newly developed NR type linear motion guide ways
from THK, and the FANUC high responsive AC servo units, our FV-Series will more than
pay for its value in no time, and we will bring you success.
1
* Optional functions under FANUC MXP-200FB or MXP-200FC control system.
The most cost-effective solution in high-speed,
high-precision mold & die machining.
0.1μm High Resolution Modular (HRM)* + Simultaneously Differential Feedrate Control (SDFC)* Take a YCM FV-Series Vertical Machining Center with the HRM and SDFC functions, conduct tests and
then check by Heidenhain Grid Encoder with the following results, which prove
HRM and SDFC not only enhance the feed rate control but also keep good accuracy.
■■ Conduct R = 40mm 1.58" circular interpolation on XY plane with 600mm/min. 23.62ipm and
5,000mm/min. 196.85ipm cutting feed respectively.
10μm /div
F: 600mm/min.
F: 23.62ipm
10μm/div
Circularity: 4μ
Circularity: 5μ
F: 5,000mm/min.
F: 196.85ipm
■■ Conduct 45mm 1.77" linear interpolation on XY plane with 600mm/min. 23.62ipm and
5,000mm/min. 196.85ipm cutting feed respectively.
HEIDENHAIN
ACCOM
HEIDENHAIN
ACCOM
Error: 6μ
Error: 6μ
F: 600mm/min.
F: 23.62ipm
F: 5,000mm/min.
F: 196.85ipm
2
Unique Spindle IDD Design
Unique direct coupled spindle design could isolate heat source, reduce the thermal deformation, increase the spindle precision and prolong spindle life.
Isolated polyurethane flexible coupling is used between motor and spindle.
Optional spindle cooling system could achieve better accuracy control.
Direct power transfer from spindle shaft to the cutting edge, ensures the power
efficiency. Detecting the spindle speed from the build-in encoder of spindle
ensures the best performance of rigid tapping.
Hi-Speed, Hi-Power Spindle Design
FV56T (30#)
■ Ceramic bearings are applied on 15,000rpm spindle, with features of
lighter weight, low centrifugal force, high rigidity, low coefficient of heat
expansion, so as to achieve better accuracy and spindle life.
■ High horse power design, maximum output for acceleration can
achieve 20kW 27HP.
■ High torque, low inertia-form 0 to 6,000rpm takes only 0.3sec.
to reach. Excellent in mass drilling and tapping works.
■ The high precision spindle bearing system, with ID.
45mm, is to match the small & precise mold making
requirements.
■ Max. rigid tapping speed: 6,000rpm.
FV56A/85A/102A/125A (40#)
■ The 10000rpm spindle deploys precision
ceramic ball bearings of light mass, low
centrifugal force, low swell factor, but high
rigidity, which assure the optimal accuracy
and spindle life span.
■ Oil-Air lubrication 12,000rpm or 15,000rpm spindle
is available for option.
3
Various High-Speed Spindle Options for Selection to Meet the
Utmost Machining Requirements.
For : FV56A / FV85A / FV102A / FV125A
10,000rpm (std.)
For : FV56T - 15,000rpm
5min.
6.96 50.34
5min.
2.38 17.21
3.7 5
0.54kgf-m
0.36kgf-m
0.67 4.85
3,000
5,500
8,000
15,000
1,500 2,100
For : FV56A / FV85A / FV102A / FV125A
12,000rpm (opt.)
12.98 93.89
1,500 2,100 2,700 4,000
1.07kgf-m
0.61kgf-m
0.45kgf-m
5,500
8,000
10,000
12,000
1,500
1min.
5min.
1,500
3,000
22
30
12.98 93.89
2min.
11.69 84.56
5min.
8,000
4,000
10,000
2min.
5min.
22
30
18.5 25
18.5 25
1.50kgf-m
1.22kgf-m
0.89kgf-m
0.61kgf-m
L H
30
For : FV85A / FV102A / FV125A
15,000rpm (opt.)
1min.
5min.
22
2.14kgf-m
1.46kgf-m
1.07kgf-m
0.73kgf-m
L H
12,000rpm (opt.)
11.69 84.56
10,000
5min.
5min.
L H
12.98 93.89
8,000
10,000rpm (opt.)
5min.
5min.
4,500
12,000
L H
1,500
4,000
1.43kgf-m
1.20kgf-m
0.97kgf-m
0.71kgf-m
0.49kgf-m
15,000
4
High Efficiency Utmost performance Integration,
Solution & Automation
Reliable ATC Unit
■ Fast and reliable roller gear cam ATC allows
ATC time in 1 second (for FV56T), and 3.5
secods (for FV56A/FV85A/ FV102A/FV125A),
lowers the idle time and enhances the machining efficiency.
■ The ATC units were running tested more than
million times before their mass production to
ensure high reliability.
Complete chips disposal system
■ Ensure the cleanness of machining environment.
Optional flush coolant can be used to prove the chips
disposal efficiently.
■ Screw type chip conveyor makes the chips disposal
more easily & efficiently. (FV85A / FV102A)
■ Complete set of the Y-axis back side plate well protects
the guide-way for durable operation.
Shuttle Type Automatic Pallet Changer
(FV102A, Option)
■ APC's swivel arm is driven by X-axis servo motor with unique
rack transmission design, features fast and accurate pallet
change mechanism.
■ APC time is around 15 seconds.
■ Over sized taper pins are applied to ensure backlash-free
positioning and rigid clamping on the pallet.
■
APC feed rate is adjustable to appropriate speed for different work pieces' demand.
Advanced APC Design (FV56T/A, Option)
■ Hi-speed rotary auto-pallet changer.
■ APC time takes 9 seconds only.
■ Reliable rotary mechanism driven by servo motor reducer
achieves quick APC speed.
■ Rotary speed is adjustable to ensure better stability when
heavy loading on the pallet.
■ Shot flush coolant could clean the positioning block
automatically.
■ The minimum floor space required, saving floor space and
saving money.
5
/
/
Super-Accuracy & Rigidity Construction for High Speed Epoch
■ Tough and durable MEEHANITE castings deliver exceptional cutting stability and consistent accuracy - the massive,
rigid internally ribbed construction reduces damping effect for superb part finishing.
■ The extra wide column base and machine base maximize the cutting rigidity, and enhance machine stability during
heavy-duty machining.
■ Hardened & ground ballscrews are precisely pre-tensioned at both ends, supported by angular contact thrust
bearings, and directly coupled with high responsive AC servomotors of backlash-free for outstanding positioning
repeatability and accuracy during long machining cycles.
■ All axes utilize the newly developed NR type linear motion guide ways from THK of its superior rigidity, low friction,
low noise, thus to assure much smoother movement in high-speed traverse.
■ All linear motion guide ways are mounted on the very fine surface for maximum surface contact and exceptional
cutting rigidity and stability.
FV56T
Headstock
Extra
W
e
n Bas
olum
ide C
Axial Rapid Feedrate (opt.)
ide
Extra W
60mm
Mac
ase 9
hine B
37.80"
X
36m/min. (48m/min.) 1,417ipm (1,890ipm)
Y
36m/min. (48m/min.) 1,417ipm (1,890ipm)
Z
24m/min. (48m/min.) 9,45ipm (1,890ipm)
6
/
/
■ Tough and durable MEEHANITE castings deliver exceptional cutting stability and consistent accuracy - the
massive, rigid internally ribbed construction reduces damping effect for superb part finishing.
Extra
lumn
Co
Wide
Base
Axial Rapid Feedrate
Extra
7
ase
hine B
Mac
Wide
mm
1,090
"
42.91
X
36m/min. 1,417ipm
Y
36m/min. 1,417ipm
Z
24m/min. 9,45ipm
/
/
■ Tough and durable MEEHANITE castings deliver exceptional cutting stability and consistent accuracy - the massive,
rigid internally ribbed construction reduces damping effect for superb part finishing.
se
mn Ba
e Colu
id
W
Extra
Y-Aaxis
4-Slideway Design
Extra
chine
Ma
Wide
mm
B
,455
ase 1
57.28"
X
24m/min. 9,45ipm
Y
24m/min. 9,45ipm
Z
24m/min. 9,45ipm
8
/
/
DIMENSIONS
* The appearance of the machines will be diverse due to different model and selectivity of controllers.
420 16.54
110
3.94
420 16.54
100
100
3.94
3.94
100
100
3.94
3.94
110
TABLE SIZE
110
4.33
3.94
9
0.35
27.5 1.08
2 0.08
30°
14 0.55
23 0.91
0.5
0.02
700 27.56
14 H8
0.55
700 27.56
2,740 107.87
2,090 82.28”
1,660 62.35”
T-SLOTS
FV56T : 2,330 91.73”
FV56A : 2,480 97.64”
2,167 85.31”
230 9.06”
2,120 83.46”
1,990 78.35”
678 23.62”
(Door Open)
FV56T : 1,620 63.78”
FV56A : 1,850 72.83”
9
1,625 63.98”
2,280 89.76”
Unit : mm inch
/
/
DIMENSIONS
TABLE SIZE
3,430 135.04”
T-SLOTS
18 H8
31
1.22
0.71
32
1.26
0.5
0.02
13
0.51
FV85A : 1,000 39.37 / FV102A : 1,120 44.09
75 7”
R6 6.5
R2
520 20.47
60 100 100 100 100 60
2.36 3.94 3.94 3.94 3.94 2.36
2,413 95”
2,300 90.55”
2,780 109.45” (CTS: 3,110 122.44”)
2,235 87.99”
2,030 79.92”
2,445 96.26”
3,040 119.69”
150 5.91”
216 8.5”
1,290 50.79”
FV85A : 2,150 84.65”
FV102A : 2,580 101.57”
Unit : mm inch
10
/
/
DIMENSIONS
520 20.47
90
R
.4
3”
0
TABLE SIZE
R
35
520
20.47
100 100 100 100 60
3.94100
3.94 100
3.94 3.94 2.36
60 100 100
2.36 100 100 100 100
32 1.26
0.5 0.02
13 0.51
31 1.22
0.71
3,100 122.05”
1,275 50.2”
1,650 64.96”
1,050 43.34”
2,975 117.13”
2,300 90.55”
2,070 81.5”
1,890 74.41”
2,500 98.43”
2,240 88.19”
1,250 49.21”
3,500 137.8”
11
Unit : mm inch
2,466 97.09”
H8
2,125 83.66”
18
3,000 118.11”
1350 53.15
1350 53.15
T-SLOTS
/
/
DIMENSIONS
Relevant Specifications of APC (Option)
Model
FV56T
Pallet Size
560 x 410mm 22.05" x 16.14"
Table Load Capacity
120kg 265 lb
Nose and Table Top
FV56A
25 ~ 475mm 0.98"~18.70"
36/36/24 m/min. 1,417/1,417/945ipm
(X/Y/Z)
Machine Weight
3,630kg 8,003 lb
3,850kg 8,488 lb
250 9.84
SCREW HOLE
865 34.06
R5
R2 40
1.2
6
40
R5 .26
1
R2
1,100 43.31
0.5 0.02
22.5 0.89
ø13.5
ø0.53
80 80
3.15 3.15
M12x1.75P
460 18.11
160 6.30 160 6.30
410 16.14
1,850 72.83
2,230 87.80
800 31.50
2,045 80.51
2,185 86.02
1,930 75.98
1,175 46.26
260 10.24
2,155 84.84
2,190 86.22 (top cover , option)
FV56T : 2,145 84.45 / FV56A : 2,470 97.24
FV56A :2,675 105.31 (α T6，CTS*, option)
195
7.68
1,600 62.99
1,960 77.17
2,500 98.43 (option)
2,210 87.01
80 80
3.15 3.15
240 9.45
250 9.84
R6
R2 75
6.5
7
118o
160 6.30 160 6.30
240 9.45
560 22.05
DIMENSIONS
1,350 53.15
3,295 129.72
APC TABLE SIZE
310
12.20
3,095 121.85
Unit : mm inch
12
/
/
DIMENSIONS
Relevant Specifications of APC (Option)
Model
FV102A
Pallet Size
1,000 x 480mm 39.37" x 18.9"
Table Load Capacity
400kg 882 lb
30~570mm
Nose and Table Top
1.18"~22.44"
(X/Y/Z)
Machine Weight
24/24/24 m/min. 945/945/945ipm
6,360kg 14,021 lb
1,360 53.54
245
9.65
TABLE SIZE
SCREW HOLE
40 1.57
500 19.69
°
60
2C2C
°
240 9.45
ø110
2C
2C
18
6
18
6
1,000 39.37
100x9
0°
60
1,350 53.15
35
45
50 1.97
M16x2P
°
675
26.57
120°
ø20
60
4,090 161.02
1,680 66.14
DIMENSIONS
480 18.90
100x4
3
0.12
ø50
3,475 136.81
1,630 64.17
13
2,820 111.02
170 6.69
R400
R15.75
635
25
870
34.25
1,365
53.74
CTS* : 3,110 122.44
2,920 114.96 (MAX.)
2,015 79.33
995 39.17
2,455 96.65
2,030 79.92
920 36.22 (door open)
2,525 99.41
4,090 161.02
1,210+40
47.64+1.57(handle)
Unit : mm inch
CONTROL
CONTROL
byby
High
High
Performance
Performance
ACAC
Digital
Digital
Servo
Servo
&&
Spindle
Spindle
Drives
Drives
with
withSuper
SuperPrecision
Precision
Absolute
Absolute
Positioning
Positioning
Encoders
Encoders
AIAI
NANO
NANO
CNC
CNC
Controller
Controller
forfor
High
High
Precision
Precision
Operation
OperationininNanometers
Nanometersand
andAcknowledged
AcknowledgedHRV
HRVControl
Control
AICC
AICC
II High
II High
Speed
Speed
High
High
Accuracy
Accuracy
JERK
JERK
Function
Function
&&
Auto
AutoSwitching
Switchingon/off
on/offMachining
Machining
Control
Control
Function
Function
High
High
Speed
Speed
High
High
Accuracy
Accuracy
Rigid
Rigid
Tapping,
Tapping,
Helical
Helical
Interpolation,
Interpolation,Custom
CustomMarco
MarcoB,B,
and
and
Tool
Tool
Path
Path
Graphics
Graphics
Manual
Manual
Guide
Guide
i with
i with
Big
Big
&&
Double
Double
Screen
Screen
Display
Display
(MXP-200FC,
(MXP-200FC,opt.)
opt.)
Program
Program
File
File
Management
Management
forfor
Easy
Easy
Program
Program
Classifying
Classifying
USB
USB
Drive
Drive
Port
Port
forfor
Easy
Easy
Parameters
Parameters
&&
CNC
CNC
Programs
ProgramsTransfer
Transfer
Large
Large
Program
Program
Capacity
Capacity
with
with
1,280
1,280
Meters
Meters
ofof
Memory
Memory
High
High
Speed
Speed
Positioning
Positioning
Function
Function
(MXP-200FC,
(MXP-200FC,
opt.)
opt.)
Memory
Memory
Card
Card
Program
Program
Edit
Edit
&&
Operation
Operation
(opt.)
(opt.)
3D3D
Interference
Interference
Check
Check
(opt.)
(opt.)
NANO
NANO
Smooth
Smooth
(opt.)
(opt.)
G-menu
G-menu
Function
Function
User-friendly
User-friendly
G-menu
G-menu
function
function
provides
provides
multiple
multiple
machining
machining
cycles
cycles
that
that
greatly
greatly
simplifies
simplifies
programming
programming
steps
steps
Calculator
Calculator
Function
Function
Convenient
Convenientcalculator
calculatorfunction
function
provides
providesfast
fastcalculation
calculationand
and
setting
settingofofworkpiece
workpieceoffsets
offsets
Easy
Easy
Shop-floor
Shop-floor
Programming
Programming
Manual
Manual
Guide
Guide
i i
Easy
Easy
to to
use
use
conversational
conversational
software
software
offers
offers
convenience
convenience
of of
part
part
programming
programming
right
right
onon
thethe
shop-floor
shop-floor
with
with
3D3D
graphical
graphical
display
display
and
and
fullfull
simulation
simulation
function
function
Counter
Counter
Function
Function
Allows
Allowsuser
usertotoeasily
easilykeep
keep
track
trackononnumber
numberofof
workpieces
workpieceswith:
with:
Main
MainCounter
Counter
Periodical
PeriodicalCounter
Counter
Daily
DailyCounter
Counter
Over
OverCycle
CycleAlarm
Alarm
Intelligent
Intelligent
Tool
Tool
Data
Data
Management
Management
Comprehensive
Comprehensive
tool
tool
data
data
management
management
function
function
allows
allows
operators
operators
to to
monitor
monitor
and
and
manage
manage
allall
positions
positions
in in
tool
tool
magazine
magazine
High
HighSpeed
SpeedMachining
Machining
Mode:
Mode:M400
M400
Combined
Combinedwith
withartificial
artificial
intelligence,
intelligence,M400
M400provides
providesusers
users
more
moreconvenient
convenientand
andeasier
easier
ways
waysofofoperation
operationand
andachieves
achieves
fast
fastcycle
cycletime
timeforforthe
thebest
best
machining
machiningresult.
result.
Pop-up
Pop-up
Alarm
Alarm
Display
Display
Detailed
Detailed
troubleshooting
troubleshooting
procedures
procedures
willwill
bebe
automatically
automatically
displayed
displayed
when
when
machine
machine
alarm
alarm
occurs
occurs
that
that
allows
allows
users
users
to to
restore
restore
machine
machine
status
status
and
and
minimize
minimize
down
down
time
time
Intelligent
IntelligentMaintenance
Maintenance
Reminder
Reminder
Pre-set
Pre-setmaintenance
maintenance
schedules
schedulesare
areprogrammed
programmed
totoremind
remindoperators
operatorstoto
inspect
inspectperiodically
periodically
prolonging
prolongingmachine
machinelife
life
Automatic
Automatic
Tool
Tool
Length
Length
Measurement
Measurement
Manual
ManualTool
ToolLength
Length
Measurement
Measurement
Pre-set
Pre-set
macros
macros
and
and
graphical
graphical
procedure
procedure
areare
provided
provided
forfor
automatic
automatic
tool
tool
length
length
measurement
measurement
function
function
Easy
Easysetup
setupofoftool
toollength
length
measurement
measurementprovides
provides
convenient
convenientsetting
setting
ofoftool
tooloffsets
offsetsdata
datafrom
from
one
onetool
tooltotoanother
another
1. The
1. The
manufacturer
manufacturer
reserves
reserves
the the
right
right
to modify
to modify
thethe
design,
design,
specifications,
specifications,
mechanisms,
mechanisms,
etc.etc.
to improve
to improve
thethe
performance
performance
of of
thethe
machine
machine
without
without
notice.
notice.
All the
All the
specifications
specifications
shown
shown
above
above
areare
justjust
for for
reference.
reference.
2. The
2. The
functions
functions
of the
of the
controllers
controllers
willwill
be be
distinct
distinct
duedue
to different
to different
model
model
andand
selectivity.
selectivity.
OPERATION
Software enhancement exclusively from YCM
Multi-function Display
Easily select multiple windows from the following list of display for your
monitoring needs.
G-code Status
M-code Status
Spindle Status
Feedrate
Tool Data
Work Coordination
Machining Hours
Date and Time
Controller Running Hours
Spindle Load
Function Display
Parts Count
High Speed Machining Mode: M400
Artificially intelligent machining function that is developed from accumulation
of all YCM knowledge and experience on high speed to achieve the fastest
cycle time with best machining results. Machining efficiency improved by
25% without sacrificing machining accuracy.
Wireless Message Notification (opt.)
Integrating GSM communication and CNC technology, YCM
developed the WMN system for wireless notification of machine
and work status report.
YCM
WORKP
IECE
STATUS
:
COMP
LETE

specifications - YEONG CHIN MACHINERY INDUSTRIES CO., LTD

Transcription

Similar documents

ser vices - EDIS Anlagenbau

Brochure - American Auctioneers Group