SIG-CA-Merchant-Guide - SIG Construction Accessories

Transcription

Merchant product guide to
Construction Accessories
2
Introduction
Here to help with product choice
Welcome to the SIG Construction Accessories merchant guide.
You have access to a vast range of top quality, leading brand
construction accessories via our nationwide branch network.
In addition to the best products, you need the best advice
and as the specialists in our field we can also deliver
expert product and application support, plus design
services for masonry and groundwork projects. We’re
here to help you, with the right products for the job,
wherever you want them, on time and within budget.
You can trust us to offer you a friendly, professional
service and fast, responsive deliveries, locally or
nationally. This brochure is a handy version of our
comprehensive construction accessories catalogues.
If you can’t see what you’re looking for or need more
information, just give us a call.
Our in-depth stock holding covers all your needs
including:
• Brickwork Accessories
• Concrete Repair & Protection
• External Render
• Flooring & Tiling
• Groundwork Engineering
• Grouts & Anchors
• Insulation & Ventilation
• Reinforcement & Formwork
• Sealants, Fillers & Chemicals
•Waterproofing
www.sig-ca.co.uk
Introduction
3
Contents Page
GROUNDWORK ENGINEERING8-11
REINFORCEMENT &
FORMWORK
12-23
WATERPROOFING24-34
SEALANTS, FILLERS &
CHEMICALS35-37
FLOORING & TILING38-42
CONCRETE REPAIR & PROTECT43-47
GROUTS & ANCHOR
48-50
BRICKWORK ACCESSORIES
51-56
INSULATION & VENTILATION57-60
EXTERNAL RENDER
61
4
Just ask the experts
Just ask the experts
With a large range of products supplied, SIG CA has become
solution provider for all aspects of construction. With our
nationwide branch network, specialists centres, and supporting
merchant centres, we can offer you product and application
advice to ensure you complete the job first time, and to the
highest quality.
Merchant
SUPPORT CENTRE
North East
Tyneside
Tel: 0800 028 6779
Fax: 01914 915 760
E: [email protected]
North West
Manchester
Tel: 0800 183 2728
Fax: 0161 786 8069
South East
Thurrock
Tel: 08717 812 926
Fax: 020 8591 9992
South West
Bristol
Tel: 0800 028 5440
Fax: 0117 301 3621
www.sig-ca.co.uk
Product Listing 5
Groundwork
Engineering
Visqueen Radon Protection
System
Visqueen Low Permeability
Gas Membrane CE Mark
to EN 13967
Visqueen Liquid
Gas Membrane
Visqueen Gas
Barrier Membrane Visqueen Gas Resistant Self
Adhesive Membrane
Visqueen Top Hat Units
Visqueen Foil Backed &
Standard Girth Jointing Tape
Visqueen Gas Barrier Jointing
Tape
Bituthene ® 8000
Proofex Total Membrane Proofex 3000MR
Sheetseal GR Twinshield
Polythene DPM Geotextiles
Geogrids
Combigrid
Gabions
Erosion Control
Envirotrak
Reinforcement &
Formwork
8
8
8
8
8
8
9
9
9
9
9
9
10
10
10
10
11
11
11
11
Hychairs A Type 12
Circular Wire Spacers
12
Alti-Spacer
12
Flat Based (Double Cover) 12
Arched Based (Triple Cover) 12
Arched Based (Double Cover) 13
Square Bar
13
Tying Wire Grade Plate Spacers Support Fix Tric Trac Spacer
Plastic Shims
Mild Steel Dowel Bars
Stainless Steel Dowel Bars
Dowel Bar Sleeves
Expansion Dowel Caps
Alti-Shield
Alti-Shield Max
Protection Caps
Holding Down Bolts
Cardboard Bolt Boxes Expanded Metal Bolt Boxes Denso Tape 15mm Thru-Tie System Wing Nuts & Waler Plates
Connection Nuts
Thruty Sleeve Thruty Cones
Plastic Stoppers
Tiefill Adoplug
Beamform
Alti-Form
Clayboard®
Circular Concrete Column
Formers Hy-Rib® Permanent
Formwork
Standard Size Mesh
Alti-Mesh
MBT Couplers
MBT ET Series Couplers
Adostrike
Safetard Liquid
Safetard Gel
Adolease 13
14
14
14
14
15
15
15
15
15
15
15
16
16
16
16
16
16
16
17
17
17
17
17
17
18
18
18
19
20
20
20
20
20
21
21
Safelease Safecure Standard
Safecure Super
Adotuf Concrete Surface
Hardener and Dustproofer
Adocure Sealer
Adocure WW
Adocure Standard Adocure Super
Sprayers
PVC Groutcheck Tape
Adoclean
Waterproofing
21
21
21
22
22
22
22
22
22
23
23
Bituthene® MRX
24
Bituthene® GP 24
Bituthene® 4000
24
24
Bituthene® 8000
Bituthene® Protection Boards
and Tapes
24
Bituthene® LM
24
24
Bituthene® Primers
25
Preprufe®
Preprufe® 160 Flex
25
25
Preprufe® 800PA
Preprufe® Plus
25
Hydroduct® Vertical
Drainage Sheets
25
Hydroduct® 200 25
25
Hydroduct® 220
Proofex 3000
26
Proofex 3000MR
26
Proofex Engage26
Proofex Cavity Drain
26
Sheetseal 226
26
Sheetseal Primers
26
Double Drain
26
Plaster Drain
27
Cavity Drain
27
6
Product Listing
Proofex Hydromat
27
Hydromat Powder
27
Structureseal Waterproofing
Membranes
27
Dual Seal
28
Visqueen Liquid Gas
Membrane
28
Bituthene® LM
28
Mulseal DP
28
Flexiseal
28
LAC
29
Toughseal
29
Synthaprufe Original
29
29
Adcor® 500S
Supercast SW10 and SW20 29
Renderoc Plug
30
Waterstop30
Dual Stop Bentonite
Waterstop 30
Hydrotite
30
Thoro Waterplug
30
Fastfill WP
31
Vandex Plug
31
FebTank Plug
31
Nitocote CM210
31
Nitobond SBR 31
Thoroseal®
31
Thoroseal Super
32
FebTank Super
32
Sika Damp Proofing Slurry
32
Sika 1 Pre-Batched Mortars 32
Vandex BB 75
33
Vandex Super / Super White 33
Limelite Plasters
33
SBR Bond
33
Ronafix for Waterproofing
33
Sika 1
33
Sika 2
34
Sika 4
34
www.sig-ca.co.uk
Sika 4A
34
Sealants, Fillers &
Chemicals
Aerofil 35
Closed Cell Polyethylene
35
Bitumen Impregnated Boards 35
Nitoseal MS100
36
Nitoseal MS600
36
Thioflex 600 36
Colpor 200PF
36
Gripfill
36
Everbuild PINK GRIP
37
Flamex One
37
®
Flooring & Tiling
Ardex X7
Ardex X7R / X7RW
Ardex X77 / X77W
Ardex S21
Ardex-Flex FL
Ardex K11
Ardex K15
Ardex A55
Arditex NA
Arditex RS Plus
Ardex Feather Finish Ardex A35
Ardex A23
Ardex A38 Ardex K301
Ardex WPC
Ardex DPM
Ronafix for Screed
Pro-Bed HS - Fine Bedding
Mortar for Paving
Flowpoint
38
38
38
38
38
39
39
39
39
39
39
40
40
40
40
40
41
41
41
41
Flowpoint ECO
Ronadeck Resin Bonded
41
42
Concrete Repair &
Protection
Ardex A45- Internal Repair
Mortar
43
Ardex A46 - External &
Internal Repair Mortar
43
Ardex P51
43
Febset 45
43
Monolite
43
Monomix
44
Fastfill
44
Steel Reinforcement
Protector 841
44
Renderoc GP
44
Renderoc HB
44
Renderoc HB45 45
Galvafroid
45
Paveroc
45
Paveroc GP
45
Nitroprime Zincrich Plus45
Sika Monotop 61045
Sika Monotop 61545
Sikadur 3146
Sikadur 31 GB Rapid
46
Sikadur 32
46
weber.cem Lightweight46
weber.cem HB30 and HB4046
weber.cem Fairing Coat46
weber.tec Bedding Mortar47
weber.cem Pyrapatch47
weber.cem Pyratop
47
weber.tec EP Structural
Adhesive47
weber.cem Bondcoat47
weber.tec EP Mortar 47
Product Listing
Grouts & Anchors
Five Star Grout
weber.cem Construction
Grout
Conbextra GP
Conbextra HF
Cebex 100
Conbextra EP10
Conbextra EPR
weber.tec EP Pourable Grout
Lokfix S25
Lokfix P25
weber.tec Anchor Grout
Sika Anchorfix-1
C Mix Plus Polyester Resin Styrene free
48
48
48
48
48
48
49
49
49
49
49
50
Brickwork
Accessories
Brickforce®
Bricktor® CCR
Metal Lath and Mesh
Bekaert Bricktie SCF
Ancon Wall Ties
Debonding Sleeves
Insulation Retaining Clips
Tek Screws
Black Teplo Clip
Remedial Wall Ties
Staifix-Thor Helical Crack
Stitching Kit
Staifix Universal Wall Starter
System
Ancon Reinforcement
Ancon AMR Reinforcement
Ancon AMR-X Reinforcement
Zedex CPT
Hyload Original
50
51
51
51
51
52
53
53
53
53
53
54
54
54
55
55
55
55
Hyload Insulated DPC 55
Hyload DPC Fixing Strip56
Hyload DPC Fixing Pins56
Hyload DPC Jointing Tape56
Zedex CPT Jointing Tape56
Zedex CPT Fixings Strips
and Pins 56
Anti-Fleece56
Hessian Blanket
56
Insulation &
Ventilation
Speedline Cavity Closer XPS
Speedline Cavity Closer FR
Speedline Cavity Closer
FR Plus
Kingspan Kooltherm Cavity
Closer
Thermabate Cavity Closers
SF Multicloser TF Multicloser
TF1000
TF2000 Masonry Cavity Stop
Sock 552
Timber Frame Cavity
Barrier 551 Linear Firestop Strip
553 & 554 Acoustic Party Wall DPC557
AIM Wall Cavity Fire Barrier
AIM Cavity Fire Closer
AIM Fire Stop Strip
AIM Fire Stop Block
Telescopic Underfloor
Ventilator
Vertical Extension Sleeve
Horizontal Front
Extension Sleeve
Horizontal Rear
Extension Sleeve
57
57
57
57
57
57
57
58
58
58
58
58
59
59
59
59
59
59
60
60
60
Airbrick60
Cavity Sleeves60
Weep Vent / Concealed
Weep 60
External Renders
weber.pral M
Flexirend Highbuild
Alpine - White travertine
finish
Cullamix tyrolean
weber.rend aid
61
61
Branch Details
62
61
61
61
7
Groundwork Engineering
8
Gas Barrier Systems
Visqueen Radon Protection System
Independently Accredited by BRE Certification Ltd (Certificate Number 083/01) Visqueen Radon Membrane
is an unreinforced polyethylene membrane, suitable for use in the protection of buildings from the ingress
of Radon gas. Visqueen Radon Membrane will act as an effective passive radon membrane in most typical
applications when installed in accordance with manufacturers instructions and will also act as a damp proof
membrane. For ease of identification on site, the membrane is coloured red.
Size: 25 x 4m
Visqueen Low Permeability Gas Membrane
CE Mark to EN 13967
Offers a safe solution for the protection of buildings against radon, carbon dioxide and low levels of methane
gas when installed in accordance with the relevant codes of practice.
The membrane is supplied in 4m x 12.5 roll and has a centre fold. It is flexible and is easy to install, and is
also suitable for use as a damp proof membrane. For ease of identification on site the membrane is coloured
yellow.
Size: 4 x 12.5m
Visqueen Liquid Gas Membrane
Visqueen Liquid Gas Membrane is used for providing damp proofing, gas proofing or waterproofing for a
range of applications, including: Gas and waterproofing of basement structures and lift pits
Size: 5, 25 Litres
Visqueen Gas Barrier Membrane
Offers a safe solution for the protection of buildings against methane, radon and carbon dioxide, when
installed in accordance with the relevant codes of practice. Visqueen Gas barrier is a multi-layer reinforced
polyethylene membrane with an integral aluminum foil. For ease of identification on site Visqueen Gas
Barrier is coloured blue on one side and silver on the reverse.
Size: 2 x 25m
Visqueen Gas Resistant Self Adhesive Membrane
A self adhesive membrane designed to prevent the transmission of radon and methane gases.
Size: 1 x 20m, 2 x 50m
Visqueen Top Hat Units
Used to provide an effective seal around service pipe penetrations. They are available in a range of sizes, the
typical size being 110mm diameter.
www.sig-ca.co.uk
Visqueen Foil Backed & Standard Girth Jointing Tape
A single sided jointing tape suitable for securing laps and joints.
Size: 75mm x 50m
Visqueen Gas Barrier Jointing Tape
A double sided butyl based jointing tape. The use of a single release paper assists ease of application on site.
Visqueen Gas Barrier Jointing Tape is suitable for use in the lapping and sealing of Visqueen Gas Barrier.
Size: 50mm x 10m
Bituthene® 8000
A superior performing externally applied waterproofing membrane for basements and substructures. 70m
hydrostatic pressure resistance with ultra low moisture transmission rate. Methane, CO2 and radon gas
protection. Suitable for application to damp surfaces and green concrete.
Size: 1 x 20m
Proofex Total Membrane
Reinforced gas membrane designed to protect buildings and their occupants from the effects of methane,
radon, carbon dioxide and other harmful gases. Like conventional ground membranes, Proofex Total also acts
as a damp-proof membrane to help protect the building against the ingress of moisture from the ground.
Size: 2 x 25m, 2 x 50m
Proofex 3000MR
A high performance self adhesive membrane for resisting methane, radon and CO², and preventing water
entering buildings. Proofex 3000MR also provides a vapour and waterproof membrane to water excluding
structures and protects concrete from attack by aggressive ground salts.
Size: 1 x 20m
Sheetseal GR
Is a cold applied, high density polyethylene film bonded to aluminium foil and coated with a bitumen/rubber self adhesive layer with a removable reinforced silicone release paper.
Size: 1 x 20m
9
10
Protection Materials
Twinshield
Manufactured from twin wall polypropylene board that is tough, durable, impact and chemical
resistant, non-toxic and waterproof. TwinShield does not stain and is suitable for all round
protection.
• Available in LPS 1207 flame retardant because of the increased concern about the role of
combustible materials fuelling major fires.
• Twinshield meets the very stringent quality control standards of the LPCB.
• Simply and quickly cut, curved or creased, lightweight and easy to position.
Type
Twinshield Standard
Twinshield FR
Dimension
1.22 x 2.44m
1.22 x 2.44m
Thickness
2mm
2mm
Colour
Black/Translucent
Translucent
Polythene DPM
Polythene DPM
Damp Proof Membranes have successfully prevented moisture penetration from floors for many years. BBA
approved and high puncture resistance, the membrane can withstand rough site handling.
Type
250mu (1000 gauge)
300mu (1200 gauge)
500mu (2000 gauge)
Temporary Protection (TPS) - Clear
Temporary Protection (TPS) - Black
Size
4 x 25m
4 x 25m
4 x 12.5m
4 x 25m
4 x 50m
Geotextiles
SIG Geotechnical Centre provide an extensive range of both woven and non-woven geotextiles from basic
separation textiles to high strength reinforcement and protection fabrics.
Geogrids
Geogrids can be provided for use in most buildings and civil engineering applications.
www.sig-ca.co.uk
Combigrid
Combigrid is a biaxial Geogrid incorporating a non-woven geotextile. With Combigrid, the geotextile layer is
heat-bonded between the lateral and longitudinal grid elements, forming a completely integrated finished
product. Combigrids are mainly used in conjunction with soft and low CBR (California bearing ratio) soils
where soil reinforcement in conjunction with separation and filtration is required. The main advantages over
using separate products are that Combigrid reduces handling, storage and installation time and costs.
Gabions
Gabions and Mattresses offer a fast effective solution for many earth stabilisation problems. Gabion
systems are widely used in many applications including retaining walls, erosion control, scour prevention,
landscaping and for coastal protection, in applications such as river and sea control. The strength and
flexibility of the welded mesh helps with stand and absorb the forces generated by retained earth or water
flow.
Erosion Control
SIG Geotechnical Centre offers a full range of both biodegradable and non-biodegradable erosion control
matting. The comprehensive range on offer from SIG Geotechnical Centre ensures a cost effective solution to
any erosion application you may have.
Envirotrak
Envirotrak is a lightweight high load paving reinforcement system manufactured from recycled plastics with
a cellular construction. Envirotrak’s unique interlocking design coupled with high loading strength provides
a strong and robust surface. Envirotrak can take loads of up to 350 tonnes per square metre. It is extremely
versatile and may be used in a wide range of applications. The interlocking design not only means it is easy
to piece together but also stays securely in place when being installed.
Envirotrak can be filled with grass or gravel. When used with top soil and seed a 95% grass covering is
provided, giving an aesthetically pleasing natural finish. Alternatively gravel can be used giving a robust and
stable base with fast water dispersion, whilst reducing the loss of expensive gravel and preventing rutting
and movement. The cell design also allows excellent water dispersion making it an ideal product for areas
prone to flooding, and can also be used as part of a SUDS system (sustainable urban drainage system).
Demarcation blocks are also available as infills on the Envirotrak. Perfect for directing traffic or marking out
areas such as car parking spaces.
11
Reinforcement
& Formwork
12
Wire Spacers
Hychairs A Type
A welded girder for supporting reinforcement or fabric without damaging the polythene membrane. Hychairs
are also ideal for dowel bar support. Supplied in 2m lengths, pack size 50m. Maximum advised spacing 1m.
Suggested usage 10m/sheet.
Available in sizes 50mm - 300mm
Circular Wire Spacers
An economical way of supporting top steel in slabs, the hoops are formed into a 1m diameter circle. 4/5
hoops per standard full size sheet of mesh are normally sufficient.
Available in sizes 50mm - 200mm in 3m lengths
Alti-Spacer
Alti-Spacer is a welded snake wire spacer for supporting reinforcement of fabric, which is stronger than
normal high chair and circular spacers, making it extremely reliable and safe on site. Alti-Spacer is easy to
handle and requires no tying so is extremely quick to set up on site.
Pack of 20
Concrete Spacers
Flat Based (Double Cover)
Flat Based Double Cover Concrete Spacers. Suitable for heavy duty horizontal applications.
Conforms to BS 7973:2001.
Size
25, 30mm
30, 40mm
40, 50mm
60, 75mm
65, 70mm
50, 60mm
Pack
500
250
200
50
50
50
Arched Based (Triple Cover)
For minimum contact with formwork. Ideal for vertical reinforcement. Conforms to BS 7973:2001.
Size
20, 25, 30mm
35, 40, 50mm
www.sig-ca.co.uk
Pack
500
200
Reinforcement & Formwork
Arched Based (Double Cover)
For minimum contact with formwork. Ideal for vertical reinforcement. Conforms to BS 7973:2001.
Size
15, 20mm
25, 30mm
30, 35mm
30, 40mm
40, 50mm
65, 70mm
75mm*
*Single cover based arched
Pack
1000
500
250
250
200
50
100
Square Bar
A heavy duty one metre long concrete bar for supporting steel on bridge decking and other areas where high
point loads can be expected. Also available rectangular double cover bar. Conforms to BS 7973:2001.
Tying Wires
Tying Wire
Coils available in black annealed steel and stainless steel. Approximately one coil of wire to 4 tonnes
reinforcement.
Type
Black Annealed Steel Coil
Stainless Steel Coil
Size
1.5mm
1.2mm
13
Reinforcement
& Formwork
14
Plastic Spacers
Grade Plate Spacers - Support Fix
Grade Plate Spacers are a double cover spacer that has been designed for use in ground floor slabs, where its
large base area prevents puncturing of polyethylene membrane. Often used with ground beam shuttering.
Size
40/50mm
65/75mm
90/100mm
Pack
250
200
100
Tric Trac Spacer
A versatile plastic spacer that can be used on both horizontal and vertical surfaces. Supplied in 2m lengths.
Size
25mm - 100/m
30mm - 100/m
35mm - 60/m
40mm - 60/m
50mm - 60/m
Plastic Shims
Hard plastic shims for non-structural, temporary alignment of precast concrete panels and components.
Made from heavy duty plastic 70 x 70mm in a range of thickness from 2 to 10mm.
Size
2mm
3mm
5mm
10mm
Pack
250
250
125
125
Dowel Bars & Accessories
Mild Steel Dowel Bars
Plain round bars supplied with either cropped or sawn ends.
Sizes: Diameter 12mm - 25mm, Length 400 - 900mm
www.sig-ca.co.uk
Stainless Steel Dowel Bars
Supplied sawn cut to order to your specific lengths. All diameters from 8mm to 40mm can be supplied.
Dowel Bar Sleeves
A flexible PVC sleeve to DOT specification, in diameters 12 - 32mm . Compressible foam plugs available for
use in expansion joints.
Expansion Dowel Caps
A rigid tube 100mm length with 25mm of compressible filler, designed as a tight fit over dowel bars in
expansion joint. Supplied in 100s. If combining both sleeves and caps, use next size up for the cap.
Grey Rebar Protection
Alti-Shield
It is a cost effective and time saving alternative to individual re-bar protection caps. It ensures that all re-bars
are covered in long runs quickly, tightly and safely to protect workers on site. Alti-Shield’s unique gripping
teeth design makes it suitable for use on both horizontal and vertical reinforcing bars for 8mm to 40mm
without any additional fixing.
Size: 1m length
Alti-Shield Max
Alti-Shield Max has a 1.5mm thick metal strip running down the spine of the protector to prevent the
reinforcing bar piercing the protector should a worker fall from height.
Size: 1m length
Protection Caps
Protection Caps have been developed to protect workers from the serious injury that starter bars can cause.
Large size suitable for scaffold bars.
Bar Size
6 - 18mm
16 - 32mm
25 - 50mm
Pack
250
250
125
Bolt Boxes & Accessories
Holding Down Bolts
A full range of holding down bolts are available. Supplied in mild steel or high tensile. Special sizes made to
order.
15
Reinforcement
& Formwork
16
Cardboard Bolt Boxes
A waxed cardboard cone which can be cut away when no longer required.
Available in sizes: 229, 305, 457, 534, 610, 762mm
Expanded Metal Bolt Boxes
A cylinder manufactured in various lengths from expanded metal, to be left in the bolt pocket for use as a
key in the concrete.
Denso Tape
For protection of bolt heads prior to concrete pours. 75mm wide x 10m long rolls.
Roll Size
75mm x 10m
50mm x 10m
100mm x 10m
Box Qty
24 rolls
32 rolls
16 rolls
Tie Bar System
15mm Thru-Tie System
A quick release 15mm tie system. The bar is supplied in 6m lengths. 20 & 26mm tie bar also available as
well as bespoke lengths.
Wing Nuts & Waler Plates
A knock-on wing nut used in conjunction with waler plates for securing the bar in formwork applications.
Can also be supplied for 20mm and 26mm tie bars. 100 per bag but supplied individually.
Connection Nuts
Joint nuts are used to join the rods complete with centre stop to ensure equal spacing inside the connector.
The shorter hexnut is available for use where access is restricted. A connection nut with a built in water
barrier is also available.
Thruty Sleeve
Thruty sleeve is a rigid PVC tube of 2mm wall thickness, supplied in 2 metre lengths which can easily be
cut to the required size. It is used as an expendable sleeve over tie bolts, facilitating their removal and also
acting as a spacer to ensure correct width of wall.
Inside Diameter size: 22mm
Outside Diameter size: 26mm
www.sig-ca.co.uk
Thruty Cones
Thruty cones are used at the ends of the thruty sleeve and can be easily extracted after removal of the
formwork, to form a chamfered recess for subsequent grouting.
Inside Diameter size: 22mm
Other sizes available to suit 20mm and 26mm system.
Plastic Stoppers
Used with plastic sleeve/tube to form a watertight seal. For tube internal diameters.
Size: 22mm
Tiefill
For the filling of tie-holes formed by formwork bolts in new construction, particularly where a rapid setting,
durable, waterproof mortar is required.
Size: 8kg
Adoplug
Polymer modified, shrinkage compensated and fibre-reinforced plug that provide a water tight seal.
Size: 8kg
Formwork Systems
Beamform
Beamform is a fast and simple system for constructing in-situ concrete ground beams and pile caps.
• Durable polypropylene sheets supplied in various sizes
• Straight Connectors and Joint Clips.
• Sheet Ties to maintain required beam widths.
• Concrete square bar for base spacers.
• Gripper grade plate for base and side spacers.
Available one size from stock.
Cut sheets available as special non-refundable item.
Alti-Form
Alti-Form is a compact beamform sheet which maintains the strength of traditional formwork and other
proprietary systems but without the bulk. The reduced size means that cutting and wastage on site is
minimal. Manufactured from heavy-duty polypropylene, Alti-form is an economical method of constructing
in-situ concrete ground beams and pile caps, that offers protection against ground movement.
Size 2m x 4m length
17
Reinforcement
& Formwork
18
Clayboard®
Clayboard® is a unique, environmentally friendly void former and foundation stabiliser. Clayboard® is a
biodegradable honeycomb core set between lightweight polypropylene facings.
Sizes: Clayboard® is supplied in panels 2440mm long by 1000mm wide, by the specified thickness.
Clayboard® is delivered to site on lightweight pads for easy unloading and is polythene wrapped for
protection. Thickness depends on the depth of the required void which should be specified by the soil
engineers taking into account the plasticity index.
Circular Concrete Column Formers
Light-weight, easy to set and strip, even in the wet. Standard sections are available ex-stock at selected
branches. Specials can be made to order.
Available in Diameters: 150 - 1200mm
Available as lined or unlined depending on finish required on concrete.
Metal Formwork Hy-Rib®
Hy-Rib® Permanent Formwork
Expamet Hy-Rib® is an expanded metal sheet product, specifically developed for use as permanent
formwork to concrete.
Hy-Rib is primarily used in construction joint applications but it is also used to form wall, beam & column
surfaces and slabs soffits, where the formed surface will not be seen.
Type
2811
Width
Thickness
89, 178, 267, 356, 0.4mm
445mm
2611
2, 3, 4, 5m
89, 178, 267, 356, 0.5mm
445mm
2411
2, 3, 4, 5m
89, 178, 267, 356, 0.75mm
445mm
Stainless Steel Hy-Rib is also available to order in the following lengths; 2, 4, 5m.
www.sig-ca.co.uk
Length
2, 3, 4, 5m
Weight
3.39kg/m²
4.23kg/m²
6.34kg/m²
Reinforcement Mesh
Standard Size Mesh
Manufactured to BS 4483:2005 from cold reduced wire conforming to BS 4482. Each wire intersection is
resistance welded using electronically controlled techniques.
Standard Sizes (2.4 x 4.8)
BS
Mesh size
References nominal pitch
of wires
Main Cross
Cross sectional Nominal Sheets Sheet Sheets Sq
weight per
metres
area per metre weight per
bundle per
width
per m2 tonne
(approx)
tonne
Main Cross Main Cross
Wire Sizes
A393
200mm 200mm 10mm 10mm 393mm 393mm 6.16kg
15
70.96kg 20
162.34
A252
200mm 200mm 8mm
8mm
252mm 252mm 3.95kg
22
45.50kg 30
253.16
A193
200mm 200mm 7mm
7mm
193mm 193mm 3.02kg
29
34.79kg 40
331.13
A142
200mm 200mm 6mm
6mm
142mm 142mm 2.22kg
40
25.57kg 50
450.45
A98
200mm 200mm 5mm
5mm
98mm
57
17.74kg 60
649.35
B1131
100mm 200mm 12mm 8mm
1131mm 252mm 10.90kg
8
125.57kg 10
91.74
B785
785mm 252mm 8.14kg
11
93.57kg 14
122.85
B503
100mm 200mm 8mm
8mm
503mm 252mm 5.93kg
15
68.31kg 20
168.63
B385
100mm 200mm 7mm
7mm
385mm 193mm 4.53kg
20
52.19kg 30
220.75
B283
100mm 200mm 6mm
7mm
283mm 193mm 3.73kg
24
42.97kg 40
268.1
B196
100mm 200mm 5mm
7mm
196mm 193mm 3.05kg
29
35.14kg 50
327.87
C785
785mm 70.8mm 6.72kg
13
77.41kg 20
148.81
C636
100mm 400mm 9mm
6mm
636mm 70.8mm 5.55kg
16
63.94kg 20
180.18
C503
100mm 400mm 8mm
5mm
503mm 49.0mm 4.34kg
20
50.00kg 30
230.41
C385
100mm 400mm 7mm
5mm
385mm 49.0mm 3.41kg
26
39.28kg 40
293.26
C283
100mm 400mm 6mm
6mm
283mm 49.0mm 2.61kg
34
30.07kg 50
383.14
D49
100mm 100mm 2.5mm 2.5mm 49.1mm 49.1mm 0.77kg
113
8.87kg
1298.7
98mm
1.54kg
50
Merchant Sizes (2.0 x 3.6)
BS
Mesh size
Wire Sizes
References nominal pitch
of wires
Main Cross
Cross sectional Nominal Sheets Sheet Sheets Sq
weight per
metres
area per metre weight per
bundle per
width
per m2 tonne
(approx)
tonne
Main Cross Main Cross
A393
200mm 200mm 10mm 10mm 393mm 393mm 6.16kg
23
44.35kg 20
162.34
A252
200mm 200mm 8mm
8mm
252mm 252mm 3.95kg
35
28.44kg 30
253.16
A193
200mm 200mm 7mm
7mm
193mm 193mm 3.02kg
46
21.74kg 40
331.13
A142
200mm 200mm 6mm
6mm
142mm 142mm 2.22kg
63
15.98kg 50
450.45
19
Reinforcement
& Formwork
20
Alti-Mesh
Alti-Mesh is economical and lighter to handle when compared to standard fabric. It maintains the specific
weight per m² in the sheet, excluding the lap zone. Alti-Mesh has 200mm edge overhang, as opposed to
Standard A fabrics with a 100mm edge overhang. Alti-Mesh has 1 less longitudinal wire and 1 less crosswire
Reduced weight and price per sheet compared to Standard Fabric. Less prone to damage compared to
Flying-End Fabric.
Couplers
MBT Couplers
The MBT range of couplers provides a cost-effective method of joining reinforcing bars. They are easy
to install. Neither bar end preparation to form threads, nor bar rotation are required. MBT couplers can
also be used to join imperial, plain round or deformed reinforcing bars. When the pre-determined tightening
torque for the bolts is reached, the heads shear off leaving the top of the installed bolt slightly proud of the
coupler. This provides an instant visual check of correct installation.
MBT ET Series Couplers
ET series couplers are used to connect reinforcing bars of the same size. They can be used when neither bar
can be rotated and are available in sizes 10mm to 40mm.
Formwork Chemicals
Adostrike
Concrete Mould Oil (BCA Category 5)
Is a high quality mould oil for general site and precast yard use that achieves a top quality concrete finish in
most situations. Release is achieved by the oil forming a physical barrier between the formwork surface and
the concrete. Surfactants help to eliminate blowholes and provide a clean, uniform and non-stained surface.
Available in 25 and 210 litre sizes.
Coverage: 30-40m² per litre
Safetard Liquid
Water Based Surface Retarder for Application to Concrete Top Face
Is a light brown aqueous solution of penetrating and retarding agents.
www.sig-ca.co.uk
Safetard Gel
Water Based Surface Retarder for Application to Formwork
A transparent, gel type composition, colour tinted to assist application. Safetard Gel has been formulated to
retard the set of fresh concrete that comes into contact with it. It is ideally suited to the production of
exposed aggregate finishes or ‘keyed’ surfaces for construction joints or for subsequent application of
plasters or renders. It is coloured to give a visual indication of where it has been applied.
Sizes: 25 Litres
Adolease
Chemical release agent (BCA Category 2)
Is a release agent designed for general site use to achieve easy formwork release. It is a blend of reactive oils
in a partially evaporative rapid drying hydrocarbon carrier. The carrier dries to form a positive barrier coating
on the form face. This leaves the reactive materials that subsequently combine with alkalis in the concrete
to form soaps at the interface of the formwork barrier coating and the concrete. This double action not only
facilitates easy formwork release and first class concrete finish but also maintains a degree of formwork
cleanliness beyond that generally obtained by other release agents.
Safelease
Environmentally Friendly Formwork Release Agent
Is ready to use and particularly suited to outdoor use on faced sealed plywood,steel moulds and other
impervious formwork materials.
Concrete Curing, Hardening and Sealing
Safecure Standard
Water Based, Medium Efficiency Concrete Curing Compound
Is a spray-on temporary membrane to retain moisture in freshly placed concrete. It is formulated to prevent
evaporation of the gauging water and provides an economical and efficient method for curing concrete.
Safecure Super
Water Based, High Efficiency Concrete Curing Compound
Is a spray-on temporary membrane to retain moisture in freshly placed concrete. It is formulated to prevent
evaporation of the gauging water and provides an economical and efficient method for curing concrete.
21
Reinforcement
& Formwork
22
Adotuf Concrete Surface Hardener and Dustproofer
The application of Adotuf to an existing cement-bound floor will significantly improve the properties of the
floor to render it dust, oil and grease proof, case hardened, resistant to dilute acids, more durable longer
lasting and easier to clean.
Coverage: 8m² per litre
Adocure Sealer
A clear, acrylic polymer resin solution primarily for application to surfaces of freshly laid concrete where
it has a double function, firstly to form a highly effective curing membrane that conforms to ASTM C309,
and secondly to act as an in-depth sealer for the hardened concrete rendering its surface dustproof and
extremely hard wearing. Its secondary function and benefits are also applicable when the material is applied
to existing concrete surfaces.
Sizes: 25, 210 litres
Coverage: 6m² per litre
Adocure WW
A white, aqueous silicate solution, designed to deposit a layer of firmly bonded, high-cohesive strength,
minute crystals within the top surface of the concrete to form an integral membrane which fills all surface
pores and capillaries to reduce moisture evaporation.
Coverage: 5.5m² per litre.
Adocure Standard
Resin based curing compound of 75% efficiency. Solution of inert resins in evaporative solvents for use in
general construction projects. WBS listed for drinking water projects. Available in 25 and 210 litre sizes.
Adocure Super
Resin based curing compound of 90% efficiency. Complies with Clause 1027 of the Department of
Tranport’s specification for Highway Works similar to Adocure Standard but with a higher curing efficiency.
WBS listed for drinking water projects.
Sprayers: 8 litre metal, knapsack or 8 litre plastic. All sprayers sold as complete units.
Sprayer for applying release agents and concrete curing compounds etc.
Sprayers
Sprayer Type
Heavy Duty Metal
www.sig-ca.co.uk
Size
8 litre
Accessories
PVC Groutcheck Tape
A specially developed matt finish waterproof pressure-adhesive PVC tape, for use on all types of concrete
formwork, in climate conditions ranging from cold to tropical. It has excellent adhesion even where residual
release agent is present on form face, retains flexibility at low temperatures and is thinner so as to not mark
concrete.
Available in sizes: 50, 75, 100mm Rolls
Adoclean
A specially selected blend of inorganic acids for the removal of cementitious contaminations and
efflorescence from brickwork. Also for removal of rust staining from concrete. The cleaner can be further
diluted depending upon application. In all cases of staining the cause should be identified.
Sizes: 5 Litres, 25 litres
23
Waterproofing
24
Waterproofing Membranes
Bituthene® MRX
Methane, CO2, and Radon resistant grade of Bituthene. Suitable for dry surface applications only.
Size: 1 x 20m
Bituthene® GP
For basements and substructures. Externally applied waterproofing membrane for CO2, and Radon gas
protection. Suitable for dry surface applications only.
Size: 1 x 25m
Bituthene® 4000
For basements and substructures. Externally applied waterproofing membrane for CO2 and Radon gas
Size: 1 x 20m
Bituthene® 8000
A superior performance externally applied waterproofing membrane for basements and substructures. 70m
hydrostatic pressure resistance with ultra-low moisture transmission rate. Methane CO2 and Radon gas
Size: 1 x 20m
Bituthene® Protection Boards and Tapes
Robust, non-degradable bitumen boards to provide protection to Bituthene membranes against backfill.
Bituthene® LM
Two component elastomeric, cold applied liquid detailing compound. For use with Grace waterproofing
membranes where liquid applied waterproofing is necessary to ensure watertight continuity, such as
pile terminations, pipe penetrations, internal corners and membrane continuity through masonry walls.
Bituthene LM cures to form a tough seamless rubber-like waterproof layer.
Size: 5.7 litres
Bituthene® Primers
Specially formulated one-part primers for sealing concrete and masonry surfaces to promote adhesion of
Bituthene membranes.
www.sig-ca.co.uk
Waterproofing
Preprufe®
Pre-applied external waterproof membranes for basements and substructures. Preprufe 300R & 160R also
provide protection against methane, CO2 and radon gas. For use below slabs and on reinforced concrete
basement walls . Preprufe membranes are composite sheets comprising a robust HPDE backing, a pressure
sensitive adhesive and a trafficable weather resistant coating.
Preprufe 300R - under slabs greater than 350mm thick. Size: 1.2 x 35m
Preprufe 160R - under slabs less than 350mm thick and vertical applications. Size: 1.2 x 30m
Preprufe® 160 Flex
Pre-applied flexible waterproof membrane that develops an adhesive bond to poured concrete. It composes
of a robust flexible backing, a pressure sensitive adhesive and a trafficable weather resistant coating.
Size: 1.2 x 35m
Preprufe® 800PA
Self-adhesive Preprufe membrane for basement walls in open excavations.
Preprufe 800PA is a cold-applied, self-adhesive waterproofing membrane, composed of a reinforced
cross-laminated HDPE film, and a synthetic non-bituminous adhesive.
Size: 1.2 x 35m
Preprufe® Plus
Waterproof membranes are composite sheets comprising a robust HPDE backing, a pressure sensitive
adhesive and a trafficable weather resistant coating with dual adhesive dual laps for added security.
Preprufe Plus 160R - Size: 1.2 x 35m
Preprufe Plus 300R - Size: 1.2 x 30m
Hydroduct® Vertical Drainage Sheets
Creep resistant drainage sheets are prefabricated geocomposites comprising studded polystyrene drainage
cores covered with polypropylene filter fabric. They provide cost effective alternatives to traditional
aggregate drainage. To be used in conjunction with Grace waterproofing membranes.
Hydroduct® 200
Polypropylene spun bonded filter fabric on one face of a 11mm studded drainage core. Applied to walls
of basements that have been waterproofed with Bituthene membranes and protected with Bituthene
Protection Boards.
Size: 1.25 x 32m
Hydroduct® 220
Polypropylene spun bonded filter fabric on one face of a 11mm studded drainage core with a bonded plastic
film on the other. Applied to walls of basements that have been waterproofed with Bituthene membranes.
Also applied to existing basement walls and permanent shuttering prior to the application of Preprufe
membranes.
Size: 1.25 x 32m
25
Waterproofing
26
Proofex 3000
Proofex 3000 is a high performance self-adhesive membrane for a range of waterproofing applications
including basements and substructures. Proofex 3000 provides a vapour and waterproof membrane to water
excluding structures and protects concrete from attack by aggressive ground salts.
Size: 1 x 20m
Proofex 3000MR
A high performance self-adhesive membrane for resisting methane, radon and CO2, and preventing water
entering buildings. Proofex 3000MR also provides a vapour and waterproof membrane to water excluding
structures and protects concrete from attack by aggressive ground salts.
Size: 1 x 20m
Proofex Engage
Proofex Engage is a pre-applied waterproofing membrane which mechanically bonds to poured concrete,
remaining in place if settlement of substrate occurs.
Size: 1.27 x 30m
Proofex Cavity Drain
This provides a continuous water and damp proof drainage former to connect with drainage channels or
outlets cast into floor slabs. These drainage channels or outlets connect with the site drainage system to
provide a high level of waterproofing security.
Sheetseal 226
Sheetseal is a cold applied, self-adhesive bitumen sheet waterproofing membrane. It is typically used as an
external basement tanking system or ground floor DPM, particularly where large unobstructed areas are to
be waterproofed.
Size: 1050mm x 19.05m
Available in smaller sizes 300mm and 150mm for detailing
Sheetseal Primers
Sheetseal Primer is used on all vertical or inclined surfaces to aid adhesion of the RIW Sheetseal 226.
Sizes: 5, 25litres
Double Drain
Double Drain is an impermeable high density polyethylene profiled sheet incorporating a permeable
geotextile filter fabric designed to prevent ground water reaching a structure and to protect and enhance the
performance of the waterproof membranes.
Size: 2 x 15m
www.sig-ca.co.uk
Waterproofing
Plaster Drain
Plaster Drain is an internal drainage system manufactured from clear high density polyethylene with 5mm
undercut studs in a dovetail shape which forms the key for plaster and render finishes in above and below
ground situations.
Size: 2 x 20m
RIW Cavity Drain
Cavity Drain is an internal tanking drainage system used to collect water entering the basements and
sub-structures and channel it to a sump or collection point for disposal. P20 is used mainly on floors but can
also be used for walls. P5 is used only for walls.
Type
Cavity Drain P5
Cavity Drain P20
Roll Size
2.07mm x 20m
2 x 20m
Weight
0.48kg/m²
0.95kg/m²
Overall Thickness
5mm
20mm
Bentonite Geotextile Waterproofing
Bentonite membrane forms a continuous mechanical bond to concrete. This bond is created when the
strong geotextile fibres are encapsulated by poured concrete.
Proofex Hydromat
Proofex Hydromat is a bentonite waterproofing membrane with unique surface bentonite impregnation for
impermeable lap joints.
Sizes: 1.2 x 2.42, 2.42 x 15m
Hydromat Powder
To ensure watertight continuity during detailing work and for sealing around awkward geometrical shapes, it
may be necessary to cover an area with loose natural sodium bentonite powder.
Size: 25kg
Structureseal Waterproofing Membranes
Structureseal is waterproofing composite of high swelling Sodium Bentonite encapsulated between a
non-woven and woven geotextile. When confined under pressure within a structure the swelling is
controlled, forming a dense, monolithic, impervious waterproofing membrane.
27
Waterproofing
28
Dual Seal
Dual Seal is a high performance self swelling, self healing waterproofing membrane comprising of a
thick, tough, high density polyethylene sheet laminated to 4kg/m2 of quality Bentonite granules. The
Bentonite used in the manufacture of Dual Seal is capable of repeated cycles of wetting and drying without
deterioration of its sealing properties and has a life expectancy measured in thousands of years. It has WRAS
approval for use with potable water and is BBA Certified.
Size: 1.22m x 7.32m
Liquid Waterproofing Membranes
Visqueen Liquid Gas Membrane
Visqueen Liquid Gas Membrane is used for providing damp proofing, gas proofing or waterproofing for a
range of applications, including gas and waterproofing of basement structures and lift pits.
Size: 5, 25 litres
Bituthene® LM
Two component elastomeric cold applied liquid detailing compound. For use with Grace waterproofing
membranes where liquid applied waterproofing is necessary to ensure watertight continuity, such as
pile terminations, pipe penetrations, internal corners and membrane continuity through masonry walls.
Bituthene LM cures to form a tough seamless rubber-like waterproof layer.
Size: 5.7 litres
Mulseal DP
Mulseal DP is a bitumen rubber/latex compound designed for use in waterproofing applications. Mulseal
is suitable for uses such as waterproof membrane to retaining walls, as a vapour barrier to panels and
repairing fine cracks in asphalt surfaces.
Available in sizes: 5, 25, 200 litres
Flexiseal
Flexiseal is a two colour, seamless and fully bonded liquid applied waterproof coating based on polyurethane
technology. RIW Flexiseal cures by drawing moisture from the air to form a highly flexible but durable barrier
to water and water vapour and is typically used where a high performance tanking system is required.
Available in black or grey.
Sizes: 6, 25kg
www.sig-ca.co.uk
Waterproofing
LAC
Liquid Asphaltic Composition is typically used as a damp proof membrane to ground floors, as a vapour
barrier behind cladding and for tanking of basements. It is also suitable for waterproofing foundation walls,
ducts, lintels, columns, beams and similar structures at, above and below ground level and as a radon
barrier.
Sizes: 5, 25, 205 litres
Toughseal
Toughseal is typically used to provide a water and water vapour proof barrier, or to give protection against
abrasion, fresh and salt water, carbon dioxide, alkalis and dilute mineral acids. Toughseal is a two-part mix
and always requires two coats it is normal to do first coat in a different colour to the second and for this
purpose is available in grey and black.
Sizes: 5, 20 litres
Synthaprufe Original
IKOpro Synthaprufe Original is a high performance, brush applied damp proofing emulsion containing
synthetic rubber latex which provides a waterproof and vapour resistant, black elastomeric membrane.
Size: 5, 25 litres
Waterstops and Waterplugs
Adcor® 500S
A conformable, swellable polymer/butyl rubber waterstop strip for construction joints that expands in
contact with water. When fully encapsulated by poured concrete, the expansive forces form a seal against
concrete faces. The seal resists hydrostatic pressure, stopping water from entering sub-structures. Adcor®
is a unique product that has been specifically developed to provide better performance than conventional
swellable rubber waterstops.
Size: 25mm x 20mm x 5m
Supercast SW10 and SW20
Supercast SW10 and SW20 are hydrophilic waterstops for use in water retaining and water excluding
structures. The SW10/20 waterstops are fixed into place using either Supercast SW adhesive or SWX
hydrophilic adhesive. Supercast SWX can also be used as a problem solving hydrophilic waterstop in
difficult access areas and detailing.
SW10 size: 5mm x 20mm x 15m
SW20 size: 10mm x 20mm x 5m
29
Waterproofing
30
Renderoc Plug
Renderoc Plug is a rapid setting mortar which is easy to apply to horizontal, vertical or overhead surfaces
at a wide range of thicknesses. There are two grades available: Renderoc Plug 1 with an initial set time of
approximately one minute, and Renderoc Plug 20 with an initial set time of approximately 20 minutes. (Set
times are based on ambient/substrate temperatures of 20°C).
Renderoc Plug 1 size: 6kg
Renderoc Plug 20 size: 25kg
Waterstop
Waterstop is a sodium bentonite based material, designed to stop water infiltration through insitu concrete
construction joints. Waterstop is manufactured in lightweight, flexible coils that are easily installed in hot or
cold weather conditions.
Type
RIW Waterstop
RIW Mesh
Size
25m x 19mm, supplied in 5m long coils.
A box of 50 600mm lengths including fixing nails 30
linear metres per box
Dual Stop Bentonite Waterstop
Dual Stop Waterstop is a Bentonite based waterstop which reacts in contact with water by swelling to
form a watertight seal in concrete structures. Dual Stop Waterstop has been specifically designed to seal
construction joints against the ingress or outgress of liquids in water retaining or excluding structures.
Hydrotite
Hydrotite is the original expanding rubber used in a variety of applications for sealing joints against water
penetration. Initially developed for sealing segmental concrete tunnel linings, Hydrotite is a compound of
polychloroprene (Neoprene) and hydrophilic resin, which expands when in contact with water, providing a
self-sealing and easy to use alternative to traditional methods. Ideal for water retaining structures to achieve
watertight insitu concrete joints.
Thoro Waterplug
Thoro Waterplug is a blend of hydraulic cements, well graded sands and chemical additives supplied in a
dry powder form. It requires only the addition of clean water to produce a ready to use, ultra-rapid setting
plugging mortar.
Sizes: 5, 25kg
www.sig-ca.co.uk
Waterproofing
Fastfill WP
Fastfill WP is a safe and simple to use ultra-rapid setting mortar for arresting water seepage and infiltration
under pressure through cracks, joints and voids in concrete and masonry prior to the application of
cementitious coatings and mortars. It is a single component, polymer modified, fibre reinforced mortar
based on shrinkage compensated Portland Cement, which is non-caustic in use.
Coverage : 1kg powder will yield 0.53 Litres.
Size: 8kg
Vandex Plug
A cementitious ready-mixed and rapid setting compound to plug leaks and stop water. DWI approved for use
in contact with drinking water.
Size: 15kg Resealable Bucket
FebTank Plug
A rapid setting Water Stop which, when mixed with clean water, provides a ready to use ultra-rapid setting
durable plugging compound for active water leaks in concrete and masonry. The material expands as it
cures to form a watertight seal with similar characteristics to concrete. Use on holes, joints and cracks. Sets
both above and below the water level.
Size: 5kg
Cementitious Waterproofing
Nitocote CM210
Nitocote CM210 is a flexible cementitious coating, used for waterproofing water retaining structures and
water excluding structures. It provides a flexible waterproof coating suitable for use in potable water tanks,
reservoirs, canals and culverts. The material can be used on concrete, brick and blockwork substrates.
Size: 23.2kg
Nitobond SBR
Additive for improving mortars for waterproofing repairs. Also used as a bonding agent for slip bricks,
ceramic tiles etc. For other uses SBR coverage is dependent on mix design.
Sizes: 2, 5, 10, 25 litres
Thoroseal®
Thoroseal®, when mixed with water or a Thoro Acryl 60/water blend (one part Thoro Acryl 60 to three parts
water) to a lump free consistency, provides a waterproof coating that is easily applied by brush or spray to
concrete and masonry above and below ground level.
Size: 25kg
31
Waterproofing
32
Thoroseal Super
When mixed with clean water Thoroseal Super forms an extremely durable waterproof coating for concrete
and masonry. Applied with a brush or spray. Available in white and grey and in bags or pails. Resists both
positive and negative pressure.
Size: 25kg
FebTank Super
FebTank Super, when mixed with clean water, forms an extremely durable waterproof coating for concrete
and masonry which is easily applied by a stiff hand brush, broom or spray. Ideal permanent waterproofing
system for basements, cellars, pools, reservoirs and below ground level applications.
Resists both negative and positive water pressure. FebTank Super is WRAS approved and LABC registered.
Available in Grey or White
Sizes: 25kg Bag, 20kg Tub
Sika Damp Proofing Slurry
Sika Damp Proofing Slurry is a one-component flexible polymer modified cementitious dampproof product
comprising of special cement based components and admixtures. When used with water a slurry or mortar
material is produced for direct application to a variety of construction substrates, available in Grey and
White.
Size: 12.5, 25kg
Sika 1 Pre Batched Mortars
Sika 1 Pre-Batched Mortars are blends of specially graded aggregates, sand and cements manufactured to
the correct mixing ratio, given below. The four graded bags (Spritz, Render, Finish, and Screeding) make up
the Sika 1 Pre-Bagged Tanking system. This consists of a three-coat render for the walls and a 35mm thick
floor screed. The Sika 1 additive is first diluted with clean water at a 1:10 ratio, and then mixed with each
bag. Sika 1 Pre-Batched Mortars can be used in the following uses, structural waterproofing to resist water
pressure below ground, moisture and dampness above ground level and internal waterproof tanking. This
system has been BBA Certified, Certificate no. 00/3761.
Consumption/Dosage of Gauging Solution
Type
Gauging Liquid
Spritz & Bonding Coat
5.7 litres
Mortar
Render Mortar
3.3 litres
Finishing Mortar
3.3 litres
Screed Mortar
2.5 litres
www.sig-ca.co.uk
Size
25kg
Coverage
2m² @ 6mm per bag
25kg
25kg
25kg
2m² @ 6mm per bag
2m² @ 6mm per bag
2m² @ 6mm per bag
Waterproofing
Vandex BB 75
Vandex BB 75 is a cementitious, ready for use ( just add water), efflorescence-free surface waterproofer
with hydrophobic properties, resistant to water and moisture. BBA approved (certificate no. 90/2516) and
approved for use in contact with drinking water.
Size: 25kg
Vandex Super / Super White
Vandex Super is a capillary-active cement based waterproofing slurry specifically designed for concrete
waterproofing applications. It is based on grey Portland cement and is applied to concrete to provide
in-depth waterproofing protection. BBA approved (certificate no. 04/4188) and approved for use in contact
with drinking water.
Size: 25kg
Limelite
®
Limelite Plasters
Modern gypsum based plasters should not be used in connection with cementitious waterproofing products.
Limelite Renovating plaster and Tarmac High Impact Finishing Plaster have been formulated to compliment
cementitious waterproofing systems.
SBR Bond
Bonding and waterproofing admixture to add to screeds, renders and repair mortar mixes.
Size: 5 Litres, 25 litres
Ronafix for Waterproofing
Ronafix is a high performance site batched, water based, polymer for producing waterproof renders. The
cured mortar bonds monolithically to concrete and other surfaces and will resist both positive and negative
pressure. Ronafix is used in swimming pools, tanks and basements to contain or exclude water.
Size: 5, 25, 220, 1000 litres
Sika Waterproofing
Sika 1
Sika 1 is an integral liquid waterproofing admixture which when diluted with clean water swells and blocks
the pores and capillaries within sand & cement renders and screeds, supplied in 5 and 25 litre containers. It
is also part of the Sika 1 Pre-Batched Mortar System.
Sizes: 5 litres, 25 litres
Consumption
As a general waterproofing admixture - approx 0.75 litre/25kg cement.
33
Waterproofing
34
Sika 2
Sika-Plug, is Sika’s fastest setting point leak plugging product when used neat, for point leak plugging where
high water ingress is present.
Size: 5 litres
Sika 4
Accelerator, waterproofer, also for oil resistant renders and underwater concreting. For point and surface
waterproofing against seepage, particularly sea water and sewage.
Size: 5 litres
Sika 4A
Quick setting waterproofer for renders and leak sealing, setting in about 45 seconds. For point and surface
waterproofing against general seepage (should be covered with Sika 1 render).
Size: 5, 25litres
www.sig-ca.co.uk
Sealants, Fillers & Chemicals
Joint Fillers
Aerofil®
Aerofil 1
Aerofil 1 is a low compression natural white, inert, preformed, closed cell, polyethylene joint filler in sheet
and strip form suitable for structural movement joints in concrete, brick and blockwork .
Aerofil 2
A high density closed cell polyethylene filler for critical movement joints in civil / structural works and water
retaining structures.
Closed Cell Polyethylene
Closed Cell Expanded polyethylene foam is supplied in roll, sheet or strip form. High performance expansion
joint fillerboard, for concrete slab construction and brickwork joints.
Sheets
Size
1.2 x 2m sheets
Strips
Width
100, 125, 150, 175, 200, 225, 250, 275, 300mm
Supplied in 2m strips.
Rolls
Width
100, 150, 175, 200, 225, 250, 275, 300mm
Supplied in 10m rolls.
Thickness
10, 12, 15, 20, 25mm
Thickness
20, 25mm
Thickness
10, 12, 15mm
Bitumen Impregnated Boards
Bitumen Impregnated Boards are used as a general purpose expansion joint filler in non-critical joints and
brick wall construction.
Strips
Width
100, 150, 175, 200mm
Standard length 2440mm.
Sheets
Sheet Size
1.22 x 2.44m = 2.98m²
Thickness
12, 20, 25mm
Thickness
12, 20, 25mm
35
Sealants, Fillers &
Chemicals
36
Sealants
Nitoseal MS100
Nitoseal MS100 is a one-part primerless non-staining facade sealant. It is used for sealing joints in and
around concrete, brick, masonry, pre-cast panels, stone cladding, windows, doors and fibre cement sheeting.
Damp tolerant application.
Available in white, grey, black, portland, buff and rustic red.
Size: 380ml Cartridge
Nitoseal MS600
Nitoseal MS600 is a one-part civil engineering sealant for immersed conditions. It is suitable for sealing
movement joint that will be intermittently or permanently under water. MS600 is typically used in
reservoirs, sewage tanks, non-tidal sea walls, basements, subways, parapets, bridges and superstructures.
Damp tolerant application.
Available in grey.
Size: 600ml Sachets
Thioflex 600
Multi-component polysulphide sealant available in two grades.
Gun Grade
Produced for application in both vertical and horizontal situations.
Size: 2.5 litre tins
Pouring Grade
Only in grey for joints in floors or other horizontal surfaces.
Size: 5 litres tins
1 litre of Fosroc Primer 7 is sufficient for 30 litres of Thioflex 600
Thiroflex 600 Gun Grade Ancillaries
Available including Paddle, Follower plate, Cleaner and Gun
Colpor 200PF
Cold applied, high performance, pitch free pavement joint sealant, for the sealing and maintenance of joints
in concrete roads, concrete runways and hard standings. Colpor 200PF is particularly suitable for sealing
areas where fuel and oil spillage might occur such as aircraft fuelling areas, oil terminals, garage forecourts,
parking and cargo areas.
Size: 5 litre tins
Gripfill
High performonce, multi-purpose, gap filling adhesive. Gripfill™ is a solvent-borne, filled rubber resin
adhesive, developed to bond virtually any rigid materials together, regardless of the evenness of the surface.
Size: 310ml cartridges.
www.sig-ca.co.uk
Sealants, Fillers & Chemicals
Everbuild PINK GRIP
PINK GRIP is a revolutionary new direct bond cartridge applied adhesive formulated specifically for the
professional use, using polymers at the leading edge of adhesive technology. PINK GRIP bonds to virtually all
common building surfaces and is designed for both external and internal use.
Size: 350ml cartridges.
Flamex Fire Protection
Flamex One
Flamex One is an intumescent sealant used for low movement joint sealing and gap filling applications such
as door and window frames.
Size: 380ml cartridge
37
Flooring & Tiling
38
Tile Adhesives
Ardex X7
Extremely versatile adhesive for internal/external applications, swimming pools, etc., suitable for walls and
floors.
Size: 20kg
Ardex X7R / X7RW
Use with all tile types including fully vitrified, porcelain and mosaics. For internal and external applications
including swimming pools, etc. Suitable for walls and floors, built-in admix. Tiles can be grouted and
trafficked only 2 hours after fixing.
Available in white and grey.
Size: 20kg
Ardex X77 / X77W
Exceptionally long open time. Heavier, larger tiles can be used without slipping. Fibre reinforced, flexible
tile adhesive for internal/external use, swimming pools, etc., use with all tile types including fully vitrified,
porcelain and mosaics. Suitable for walls and floors, built-in admix.
Available in white or grey.
Size: 20kg
Ardex S21
For large format tiles. Pourable consistency. May be used to smooth rough bases and make up screed levels.
For internal/external applications including swimming pools. Tiles can be grouted and trafficked 3 hours
after fixing.
Size: 22kg
Grouts
Ardex-Flex FL
For wall and floor tile joints from 3-15mm wide in internal/external locations, including swimming pools.
Built-in admix. Available in 32 colours.
Sizes: 2.5kg, 10kg
www.sig-ca.co.uk
Flooring & Tiling
Sub Floor Smoothing
Ardex K11
With Ardex K11, floorcoverings can be applied the next day, and its rapid hardening properties mean that it
is walkable in 21/2 hours. Ardex K11 is suitable for use over traces of adhesive residues, and can be applied
from 1.5mm-10mm.
Size: 22kg
Ardex K15
Especially useful where the installation time of the floor finish must be kept to a minimum, Ardex K15 can
be applied up to 35mm thick with the inclusion of Ardex Coarse Aggregate. Ardex K15 is rapid hardening,
walkable after 2 hours, and regardless of thickness, floor coverings can be applied the next day. Suitable for
floors with under floor heating.
Size: 22kg
Ardex A55
Ardex A55 is extremely quick drying which makes it ideal for areas that require rapid repair and renovation
work i.e. hospital wards that need to remain open. The sub-floor is ready to receive floor coverings after only
11/2 hours and the adhesive can be applied whilst Ardex A55 is still damp.
Suitable thickness up to 10mm in one application.
Size: 25kg
Arditex NA
Arditex NA is a self-smoothing, protein free, low odour latex levelling compound. It is used for the
preparation of cement/sand and concrete screeds, metal, quarry tiles, asphalt flooring (grade 1), granolithic
or terrazzo floors, prior to applying the floor tiles . May also be used for pre-smoothing timber floors prior to
oversheeting with plywood and can be used under a damp proof membrane, such as Ardex DPM. Also used
to encapsulate under-tile heating cables to concrete, screeds and thermal tilebacking boards.
Suitable thicknesses up to 12mm in one application.
Size: 4.85kg Bottle, 20kg Powder
Arditex RS Plus
A cost effective, self-smoothing latex levelling Compound with excellent properties of adhesion and water
resistance. It is designed for use on sub-floors such as concrete, cement and sand screeds, terrazzo and
quarry tiles etc. Arditex RS Plus may also be applied to dense impervious surfaces such as ceramic tiles and
steel sub floors that have been primed with Ardex P 82 Primer. Arditex RS Plus can be laid from a feather
edge up to 6mm thick and to greater thicknesses by incorporating Ardex Aggregate. The rapid setting
properties mean a 3mm layer will be ready to receive floorcoverings after only 6 hours at 20°C.
Size: 4.8kg Bottle, 20kg Powder
Ardex Feather Finish drys rapidly and provides a high bond to concrete, plywood, cement/sand screeds,
existing sub-floor smoothing compounds and even existing ceramic tiles without the use of primers. Use
Ardex Feather Finish for patching, filling and feather finishing, daywork joints, ridges, gouges, depressions,
uneven trowel marks, in the sub-floor, as well as smoothing joints between staggered plywood sheets.
Size: 5kg, 11kg
Ardex Feather Finish
39
Flooring & Tiling
40
Fast Track Floor Screeding
Ardex A35
Used in place of Portland Cement in cement/sand screeds, Ardex A35 produces a floor screed that can be
walked on after 3 hours and is dry enough to receive tiling after 24 hours regardless of thickness. After 1 day
the compressive and tensile strengths of an Ardex A35 screed exceed the acceptable minimum attained by
a conventional screed after 28 days.
Size: 25kg
Ardex A23
A special cement for producing a rapid hardening floor screed for internal use which allows ceramic tiles to
be fixed after 48 hours, natural stone after 72 hours, and resilient floor coverings after 6 days.
Size: 20kg
Ardex A38
A special cement for producing a rapid setting rapid hardening and rapid drying floor screed. For internal and
external use including swimming pools. Allowing ceramic tiles or stone to be fixed after only 4 hours even
on unbonding floating screeds.
Size: 25kg
Renovation
Ardex K301
A fast setting cost effective solution for smoothing rough or damaged concrete or cement/sand screeds and
is suitable for internal and external applications prior to tiling. Ardex K 301 is walkable after 2-3 hours and
can be tiled onto after 24 hours. Use to level uneven surfaces, such as paths and patios.
Size: 25kg
Coverage: 1.6kg/m2/mm
Waterproofing
Ardex WPC
A flexible two-component waterproof coating for use prior to tiling in commercial shower situations. Also
ideal for use on moisture sensitive backgrounds prior to tiling. Tiles can be applied just 90 minutes after
application of the second coat.
Size: 5kg Bottle, 5kg Powder
www.sig-ca.co.uk
Flooring & Tiling
Ardex DPM
A two coat, colour coded, fast curing product ideal for use on very porous substrates to prevent pinholing.
Can accommodate Hygrometer readings up to 98% RH.
Size: 6kg, 10kg, 25kg
Roncrete
Ronafix for screed
A floor screed admixture for thin levelling and heavy duty wearing screeds and floor repairs. BBA Approved.
Size: 5 Litres, 25 Litres, 220 Litres
Instarmac
Pro-Bed HS - Fine Bedding Mortar for Paving
A fine bedding mortar manufactured to meet and exceed the strict requirements of BS 7533. Meeting these
requirements in no easy feat, which is why Ultrascape provide full current independant test data from a
UKAS accredited laboratory, to show full compliance. Easy to use: mix solely with water, and lay at depths of
10-75mm. Its fast strength gain sets it apart from its counterparts, meaning the area can be foot trafficked
after just 12 hours.
Size: 25kg
Flowpoint
A rapid setting flowable grout that exceeds the requriements of BS 7533. With a proven track record
spanning over 25 years, Flowpoint has met demands in both heavily trafficked and domestic paving
environments long before the British Standard was introduced. It is fast and efficient to apply, affording the
ability to grout large areas of of paving quickly and cleanly, meaning areas can be open to foot traffic after
just 1 hour.
Size: 25kg
A rapid setting flowable grout containing 20% recycled glass, that exceeds the strict requirements of
BS 7533. With a proven track record, Flowpoint ECO has met demands in both heavily trafficked and
domestic paving environments long before the British Standard was introduced. It is fast and efficient to
apply, affording the ability to grout large areas of paving quickly and cleanly, meaning areas can be open to
foot traffic in just 1 hour.
Size: 25kg
Flowpoint ECO
41
Flooring & Tiling
42
The Ronadeck system combines a fast curing resin with natural aggregates to give the look and feel of loose
stones and gravel but without the inherent mess. The applied surface is safe, slip resistant “non-slip” and
decorative. Can be used for pedestrian, industrial and traffic areas giving excellent grip in a variety of colours
and texture.
www.sig-ca.co.uk
Concrete Repair & Protection
Ardex
Ardex A45 - Internal Repair Mortar
Ardex Ardurapid A45 is ideal for the rapid repair of internal concrete, screeds, renders and concrete steps,
it can also be used to form ramps, fill cracks and make good around fittings and pipework. Ardex Ardurapid
A45 receives finishes after 90 minutes regardless of thickness and is slump free, making it ideal for vertical
and horizontal repairs.
Size: 11kg
Ardex A46 - External & Internal Repair Mortar
Ardex A46 is a slump free repair and patch mortar which can be used for both internal and external repairs
to stair treads and risers. It is also ideal for infilling holes around fittings and for patch work on wall and floor
areas. Ardex A46 has rapid hardening properties that mean it is walkable in just 2-3 hours, as well as being
suitable for use below a DPM.
Size: 11kg
Ardex P51
Ideal for a wide range of applications, Ardex P51 seals and primes gypsum based plasters and screeds and
minimises air bubbles rising through levelling compounds and porous surfaces. Ardex P51 provides up to
160m2 per unit and can also be used with Ardex A35 to produce a bonding slurry. Usually brush applied.
Size: 15kg, 25kg
Everbuild
Febset 45
Febset 45 is a specifically formulated repair mortar, based on magnesia-phosphate cement pre-mixed with
selected aggregates, which gives controlled, extremely high early strengths in temperature ranging from
-20°C (or lower) up to over 30°C. Febset 45 can be modified with 10mm aggregate for use in depths over
150mm. It is also suitable for use as a repair medium at low ambient temperatures.
Size: 25kg
Flexcrete
Monolite
Low density, high yield, shrinkage compensated, polymer modified cosmetic repair mortar for concrete,
brick or stone. Single component cementitious formulation, no primer required, simply mixed with water
and easily applied in single layers up to 100mm. Particularly suitable for vertical and overhead use. CE
Marked Class R2 to EN1504-3.
Size: 20kg
43
Concrete Repair
& Protection
44
Monomix
Medium density, multi-purpose structural grade polymer modified mortar based on Portland cement and
benefitting from shrinkage compensation and fibre reinforcement. No primer required other than saturation
of substrate. Simply mix with water and apply by hand or trowel to achieve 80mm build even overhead.
Special spray grade available. Totally waterproof under a 100m hydrostatic head and has DWI Reg 31
approval. BBA Certified and CE Marked Class R3 to EN1504-3.
Size: 25kg
Fastfill
Ultra high strength, rapid curing, single component, polymer modified, Portland cement based mortar
giving fast return to service. Shrinkage compensated and fibre reinforced for use in heavy wear applications
including industrial floors, runways, roadways and footpaths as well areas subject to early immersion. No
primer required, simply mix with water. Used from 5mm or up to 300mm when bulked out with aggregate
for filling of large voids or for bedding applications. DWI Reg 31 Approved for use in contact with drinking
water, compliant with Highways Agency Standard BD27/86, BBA certified and CE Marked Class R4 to
EN1504-3.
Size: 25kg
Steel Reinforcement Protector 841
Economic, polymer cement coating to passivate and protect steel reinforcement. Supplied with a convenient
mixing kit. BBA Rertified and CE Marked in compliance with EN1504-7.
Size: 5kg
Fosroc
Renderoc GP
General purpose concrete reinstatement mortar which can also be used as a render as well as all types of
patch repairs. It can be applied up to 20mm thick in overhead and 30mm in vertical sections. In horizontal
applications 100mm thickness can be obtained.
Size: 25kg
Renderoc HB
Single component lightweight fibre and polymer modified concrete reinstatement mortar for high build
applications. Renderoc HB can be applied up to 80mm thick in vertical and 50mm in overhead work without
the use of formwork. Thicker sections can be achieved by use of use of formwork or built up in layers.
Thickness range 10mm-50mm.
Size: 18kg
www.sig-ca.co.uk
Renderoc HB45
High performance fibre reinforced medium weight concrete reinstatement mortar. For the reinstatement
of reinforced concrete where low permeability characteristics are required and where higher compressive
strength is a consideration. Renderoc HB45 has been specifically developed for the repair of columns and
beams, but because of its medium fresh wet density, is also suitable for soffit repairs.
Size: 25kg
Galvafroid
Galvafroid is an anti-rust coating for iron and steel. It is cold-applied by brush or roller and is used for the
protection of structural steelwork, agricultural and construction plant, gates, railings, iron pipework and
in-situ weldings. Galvafroid is grey in colour and can be used as a self-finish or as a durable anti-rust coating
beneath selected top coats.
Available in 400ml, 800ml, 1.9 litres
Paveroc
Reinstatement Mortar for large area repairs of concrete pavements and floors to avoid the total replacement
of bays. Can be used internally or externally in thicknesses between 12mm and 100mm in a single
application. Primer for Paveroc is Nitobond EP.
Size: 25kg
Patchroc GP
Emergency fast setting repair mortar for concrete pavements and floors can accept traffic in 2hrs. For use
at depths from 12mm to 100mm in a single application and a maximum bay size of 4m². Primed with
Nitobond AR for Pedestrian traffic. Nitobond EP for vehicular traffic.
Size: 25kg
Nitoprime Zincrich Plus
Epoxy zinc primer used as anti-corrosion coating for exposed steel reinforcement in concrete repairs.
Size: 800ml, 1.9 litres
Sika
Sika Monotop 610
A single component polymer modified cementitious bonding bridge and steel reinforcement primer.
Size: 25kg
Sika Monotop 615
A one component cement based polymer modified high build repair and re-profiling mortar, thickness range
3mm-30mm.
Size: 25kg
45
Concrete Repair
& Protection
46
Sikadur 31
Two part epoxy thixotropic adhesive for bonding building materials. Fast setting and non-shrinking. For
sticking brick slips, bedding tiles, wood etc. NWC/NRC certified for contact with potable water. Normal grade
(N): for 5-30°C application, Rapid grade (R): for 0-15°C application.
Size 1.2kg, 6kg
Sikadur 31 GB Rapid
Sikadur 31 GB Rapid is a solvent-free, moisture tolerant, thixotropic, structural two part adhesive and repair
mortar, based on epoxy resins and special fillers, designed for use at temperatures between +5°C and +20°C.
Size 1.2kg, 6kg
Sikadur 32
Two pack solvent free liquid epoxy bonding agent in 1 and 5 kilo packs. For bonding similar and dissimilar
materials, e.g. concrete, metal, stone, glass, wood and asbestos.
Size: 5kg
Weber
weber.cem Lightweight
A polymer modified cementitious mortar mix, with specially selected lightweight fillers. It is preblended,
contains a polymer powder and simply requires the addition of clean water to produce a mortar suitable
for both soffit and vertical repairs in situations where high build replacement with conventional concrete is
impractical. High-build up to 75mm in soffit patch repairs, without formwork.
Size: 20kg
weber.cem HB30 and HB40
Single-component, polymer modified high build mortars for replacing defective concrete with 30N/mm²
and 40N/mm² compressive strength, thickness range up to 100mm vertically and 75mm on soffits.
Size: 20kg
weber.cem Fairing Coat
A single-component, polymer-modified levelling mortar used to prevent ghosting of concrete repairs
through decorative finishes.
Size: 25kg
www.sig-ca.co.uk
weber.tec Bedding Mortar
A two-component, polyester-based mortar for the bedding and fixing of manhole frames, airport landing
lights, duct frames and precast concrete units. It has been formulated for easy mixing and placement, even
at low temperatures and, when cured, provides a durable, chemically resistant bedding and fixing material
with good bond strength.
Size: 1 resin and 1 hardener, 25kg
weber.cem Pyrapatch
Is a prepacked product based on hydraulic cements with specially graded non-reactive aggregates. The
product is polymer modified which when mixed with clean water produces a fast setting repair concrete,
suitable for patch or full depth repairs up to 2m².
Size: 25kg
weber.cem Pyratop
A rapid strength gain repair concrete for thin bond pavement repairs, which is a prepacked hydraulic
cement-based product with specially graded aggregates. It exhibits high early strength, is dimensionally
stable and has excellent abrasion resistance.
Size: 25kg
weber.tec EP Structural Adhesive
A two-component, bisphenol epoxy resin and polyamine hardener, highly moisture-tolerant structural
adhesive for structural jointing and structural strengthening. Used for application thicknesses of 2 – 10 mm.
Conforms with BS EN1504-4.
Size: 5kg
weber.cem Bondcoat
A single-component polymer-modified, cementitious bonding aid. It requires only the addition of clean
water to produce a bonding slurry for weber.cem HB30, weber.cem HB40 and weber.cem lightweight
mortars. This product has been formulated to comply with the requirements of BS EN1504-3 for a bonding
primer.
Size: 20kg
weber.tec EP Mortar
A three-component bulk pack or as a two component handy pack, consisting of epoxy resin, hardener and
selected graded aggregates (filler) which when mixed produce a high strength, impermeable and chemically
resistant mortar.
Size: 26kg
47
Grouts & Anchors
48
Cementitious Grouts
Five Star Grout
A standard cementitious grout developed for applications where an economical grout with good flow and
strength is required. Five Star Grouts are based on specially selected Portland cements, graded aggregates
and admixtures including a special form of carbon. This special formulation produces a grout that conforms
to ASTM C827 Early Volume Change of Cementitious Mixtures. Does not contain iron, aluminium or other
additives which eliminates any subsequent problems of dimensional instability, corrosion or staining.
Five Star Grout is designed primarily as a flowing grout but can also be used at a trowellable or dry pack
consistency. It can be applied in thicknesses from 10 to 100mm.
Size: 25kg
weber.cem Construction Grout
weber.cem grout is a premixed non-shrink cementitious grout developed for applications where an effective
grout with adequate flow and strength is required. It is designed primarily as a pourable grout but can also
be used at a plastic or dry pack consistency. This grout can be pumped or poured and can be applied in
thicknesses ranging from 10mm to 100mm. It can be used for many general purposes.
Size: 25kg
Conbextra GP
General purpose, non-shrink cementitious grout for gap thicknesses 10 to 75mm. Recommended
applications at flowable consistency include stanchion base plates, bolt pockets and void filling. At
trowellable consistency it is recommended for bedding load bearing components.
Size: 25kg
Conbextra HF
High flow, non-shrink, cementitious grout for gap thicknesses 10 to 100mm.
Size: 25kg
Cebex 100
Expanding and plasticising grout admixture used with either neat cement or sand and cement mixes. It is
incompatible with High Alumina Cement.
Size: 227g
Epoxy Based Anchor Grouts
Conbextra EP10
Conbextra EP10 is for grouting gap thicknesses from 0.25 to 10mm. It is an all-liquid system consisting of a
base and hardener.
Size: 3 litres
www.sig-ca.co.uk
Grouts & Anchors
Conbextra EPR
Conbextra EPR is for grouting gap thicknesses from 10 to 120mm and is a three-component system
consisting of base resin, liquid hardener and specially graded inert fillers.
Sizes: 8 litres/16 litres.
weber.tec EP Pourable Grout
Specially formulated from epoxy resin and graded aggregates producing materials with exceptional tough
characteristics; capable of withstanding high dynamic loads, high compressive and tensile strength, very
good chemical resistance, cure within the temperature range 5°C to 35°C, negligible shrinkage factor
allows use for underplate or rail grouting, grout remains in contact with the underside, can be placed in
much thinner sections than cementitious grouts resulting in cost savings, chemical resistance, good flow
characteristics and negligible shrinkage.
Size: 25kg
Polyester Anchor Grouts
Lokfix S25
(pourable grade, 25 minute gel at 20°C):
For use where the hole is 8 to 40mm greater in diameter than the bar.
Size: 2.5 litre
Lokfix P25
(pumpable grade, 25 minute gel at 20°C):
Used in over head or horizontal holes where the hole is up to 25mm greater in diameter than the bar. The
thixotropic nature of Lokfix P25 reduces flow of grout out of the hole.
Size: 2.5 litre
A two-component polyester resin and special catalysed filler that has been developed for anchoring and
fixing. The pourable grout is suited for pouring into holes for anchors in floors and slabs. weber.tec anchor
grout rapid is available for cold weather working; fast setting action with rapid strength gain allows loads to
be applied within 2 hours, easy to mix and place, fixing cannot be vibrated out, economical fixing compared
with mechanical fixings, stronger than concrete in one hour, part mixing of weber.tec anchor grout allows
flexibility of use and no wastage of material, versatile material with fixings to concrete, brickwork and stone.
Size: 2.5 litre
weber.tec Anchor Grout
49
Grouts & Anchors
50
Chemical Fixings
Sika Anchorfix-1
AnchorFix-1 can be injected into most substrates including concrete, brickwork, blockwork, hollow and solid
masonry, solid rock and natural stone and is suitable for practically every type of anchoring and fastening
method, such as threaded rods, steel reinforcement, masonry wall ties and anchor sockets. Supplied in a
single 300ml cartridge that fits into a standard sealant gun, the two-component styrene free polyester resin
Sika AnchorFix-1 is mixed in the nozzle for simplicity and error free operation.
Size: 300ml
C Mix Plus Polyester Resin - Styrene free
Universal styrene free resin, C Mix Plus is a polyester resin dedicated for fixings into hollow materials . This
product is styrene free and in an extended range of packaging options.
Suitable for concrete, solid brick stone, solid brick, hollow block wall, hollow brick, hollow floor beams.
Size: 380ml.
www.sig-ca.co.uk
Brickwork & Accessories
Brickwork Reinforcement
Brickforce®
Brick reinforcement consists of two main parallel wires joined by in-line welded cross wires. Both galvanised
and stainless steel are held in stock. Brickforce is available in a range of different main wire diameters
for specific structural loading situations, and in a variety of product widths to suit different block work
construction.
Pack Sizes:
• Manufactured in 2.7m long strips and supplied in packs
• Stainless steel packs contain 20 strips (54m per pack)
• Galvanised packs contain 25 strips (67.5m per pack). Minimum overlap 225mm
Bricktor® CCR
Bricktor® CCR is a crack control reinforcement product which can be used for both standard masonry joints
and 2-3mm thin joint systems.
Sizes
Supplied as 25m roll.
Minimum overlap 225mm.
Metal Lath and Mesh
Range of expanded metal sheets and coils for internal and external plaster key applications and anti-crack
control.
Brick Reinforcement Coil
Coil Mesh Lath is produced for brick and blockwork reinforcement. Its primary usage is to prevent cracking.
Galvanised available in 63mm, 100mm, 175mm, 225mm, 305mm
Stainless Steel available in 63mm, 100mm, 175mm, 225mm
Bekaert Bricktie SCF
Reinforcement for collar jointed walls, designed to reinforce and provide structural wall ties to suit a 215mm
thick composite masonry wall.
Size: 175mm x 2.7m
www.sig-ca.co.uk
51
52
Brickwork Components
Ancon Wall Ties
The selection and spacing of wall ties depend on many factors. These include the type of brick/block to be
tied, cavity width, type and height of building, location and design life.
Product Name/ Code
Flat Safety Wall Ties
ST1
SPS
PPS (debonding sleeves
available to suit)
Wire Ties
RT2 Replaces Double
Triangle Tie
HRT4 Housing Ties
Double Triangle
Lengths
Box Quantity
Alternative Ties
200, 225, 250, 275,
250
300mm
150, 200, 225, 250, 275, 250
300mm
150, 200, 225, 250, 300, 250
400mm
2000, MF1, PT1, VST1,
WT1
2300, MR3, SESE, WTS3S
200, 225, 250, 275mm
250
1000 MT2 MPT EN2 WT2
200, 225, 250, 275mm
150, 200 225 250 mm
250
250
1000 MT4 PT VE4 WT4
1200 MTCWT DT V26
WTDT
250
3300 MTFH2 SEFCH VE7
WTS3U
250
3300 MTFS2 SEFCS WTS3E
2400, HR2, SEPE, SPE,
WTS3P
Ancon Teplo1, Basalt Fibre 200, 225, 250, 275mm
Ancon Teplo2, Basalt Fibre 200, 225, 250, 275, 300,
325, 350, 375, 400,
425mm
Ancon Teplo4, Basalt Fibre 200, 225, 230mm
Frame Cramps
SPB
SPV
www.sig-ca.co.uk
75, 100, 125, 150, 175,
200, 225, 250, 275,
300**mm
75, 100, 125, 150, 175,
200, 225, 250, 275,
300**mm
Debonding Sleeves
Debonding sleeves are used on plain-ended wall ties at vertical movement joints. The tie will restrain
the masonry against lateral wind loads but the sleeve will allow the masonry to expand or contract. A
120mm long sleeve will provide an allowance for movement and tolerance, and will be suitable for most
applications. Other lengths and sizes available to special order.
Length: 120mm.
Pack Sizes: Bags of 250
Insulation Retaining Clips
The Insulation Retaining Clip will fit all standard stainless steel wall ties.
Size: 80mm Diameter.
Pack Sizes: Bags of 250.
Tek Screws
Tek Screws are available for fixing into steel up to 12mm thick. Size: 5.5 x 38mm.
The black Teplo-Clip should be used with the TeploTie range.
Corrosion of Cavity Wall Ties
Black Teplo Clip
Remedial Wall Ties
Type
Ancon MM 63 Mechanical / Mechanical
Ancon RM 63 Resin / Mechanical
Staifix RR
Stairib Bar
Ancon AC 31
Ancon AC 31C
Cameron T47
Fischer FIS P 380 C Resin
Description
Used when tying together two leaves of solid
materials.
For use when the material in the inner leaf is
perforated.
Used where mechanical expanders are unusable.
Stainless steel ribbed bar, resin-grouted into the inner
and outer leaves.
Used where bricks are removed then replaced in the
outer leaf.
Similar to the AC 31 but cranked by 25mm to aid
fixing to the inner leaf.
Used for the repair of mass brickwork with an
unbonded brick facade.
This styrene-free injection resin is quick setting and
suitable for a wide range of applications.
53
54
Staifix-Thor Helical Crack Stitching Kit
The Staifix-Thor Helical Crack Stitching Kit is a high strength, non-disruptive solution for the permanent
repair of cracked masonry. The stainless steel helical bars are chemically bonded into bed joints to stitch
cracks, redistributing tensile forces and stabilising the structure. On completion, the bar and grout are
concealed, retaining the original character of the wall.
Contents
Helical Bar
Cementitous Grout
Grout Applicator Gun (flat nozzle)
Mixing Paddle
Grout Nozzle
Finger Towel
Size
6mm x 1000mm
3 Litres
Staifix Universal Wall Starter System
This system includes all necessary fixings to join a single skin of masonry, 2400mm high, to an existing wall
contents. Suitable for wall widths from 60mm to 250mm, this system provides a design shear strength of
4kN over a height of 2400mm.
Ancon Reinforcement
The full range of Ancon products are available including:
• Ancon IHR – Internal Head Restraints
• IHR-B with 100mm dia. Hole
• IHR-V with slot
• IHR-S with 6mm dia. Hole
• IHR-H supplied with Hammer-on Section
• IHR-C to suit cast-in channel
• Ancon 36/8 Wall Extension System
• Ancon SAH – Sliding Anchors
• Ancon FHR – Head Restraint
www.sig-ca.co.uk
Ancon AMR Reinforcement
A steel reinforcement, designed to be located in the horizontal bed joint to strengthen masonry panels.
Available in galvanised and stainless steel.
Width: 60mm, 100mm, 150mm, 175mm
Length: 2.7M lengths
Ancon AMR-X Reinforcement
Based on the existing Ancon AMR masonry reinforcement, but with shaped rather than straight cross
wires. If applied to dry bricks or blocks, only the modified cross wires are in contact with the masonry, the
longitudinal wires are elevated.
Width: 60mm and 100mm
Length: 2.7m
Damp Proof Courses (DPC)
Zedex CPT
High Performance DPC provides superior strength, adhesion and water impermeability properties. Improved
toughness helps to avoid damage during installation and is compatible with other Visqueen products.
Width
Length
Thickness
Weight
100 - 1,400mm
20m
0.8mm
0.75kg/m2
Hyload Original
High performance DPC and cavity tray system. BBA Certification. Excellent performance under high
compressive loads. Good flexibility at low temperatures.
Width
100 - 1000mm
Thickness
1.27mm
Length
20m
Insulated DPCs
Hyload Insulated DPC
Hyload Insulated DPC - bitumen polymer laminated to cross-linked polyethylene foam insulation; BBA
Certification, flexible DPC superior to polyethylene, insulation material more robust than polystyrene,
insulation inherently flexible and will not crack when bent, exceptionally easy to handle, special sizes
available.
Widths
165, 180, 225mm
Length
8m
55
56
DPC Accessories
Hyload DPC Fixing Strip
The Fixing Strip is a semi- rigid plastic strip 25mm x 3mm x 2m pre-drilled at 150mm centres.
For surface fixing any Hyload high performance DPC to the inner leaf.
Hyload DPC Fixing Pins
Used with Hyload DPC Fixing Strip, Fixing Pins for Masonry can be used for surface fixing to solid internal
substrates such as blockwork, stone and concrete. Composite inner skins require Hyload DPC Fixing Pins for
Insulation to ensure correct fixing.
Hyload DPC Jointing Tape
A double sided self adhesive bituminous tape, 10m x 100mm, for bonding DPC to DPC, and DPC to
pre-formed cloak units. Before use, ensure that surfaces to be bonded are clean and dry.
Zedex CPT Jointing Tape
All joints in lengths of DPC must be a minimum of 100mm, lapped and bonded using Zedex Jointing Tape.
Size: 100mm x 15mm
Zedex CPT Fixing Strip and Pins
When surface fixing or post fixing to the cavity face of the inner leaf, a fixing strip should be used.
The surface should first be primed, the DPC then bonded to the inner leaf using Zedex Jointing Tape and
then secured using Zedex Fixing Strip and Pins at 150mm intervals.
Brickwork Protection
Alti-Fleece
Alti-Fleece is a lightweight but strong material that has a central waterproof section and reinforced
edges with slits for tethering. The material on either side of the central waterproof section allows air and
water vapour to pass through. The material can be cut across the width to fit the length of wall requiring
protection. Alti-Fleece is strong enough to withstand wear and tear typical on building sites.
Size: 1.5 x 30m
Hessian Blanket
Hessian Rolls for frost protection and curing of concrete and brickwork.
Size: 1.37 x 46m
www.sig-ca.co.uk
Insulation & Ventilation
Cavity Closers
Speedline Cavity Closer XPS
A UPVC cavity closer with an insulated XPS core suitable for 50mm to 250mm cavity widths. Ideal for retrofit
cavities and supplied in 2400mm lengths.
Speedline Cavity Closer FR
A UPVC cavity closer with rock mineral wool insulation offering 60 minute fire integrity for 50mm to
100mm cavity widths. Accepts all window and doot frame materials.
Supplied in 2400mm lengths.
Speedline Cavity Closer FR Plus
A UPVC cavity closer with rock mineral wool insulation with a class ‘O’ foil covering. Speedline FR Plus offers
60 minute fire integrity available to suit 100mm to 200mm cavity widths. Accepts all window and door
frame material.
Supplied in 2400mm lengths.
Kingspan Kooltherm Cavity Closer
Kingspan Kooltherm Cavity Closer is a PVC-U extrusion with a rigid thermoset insulation core. It is
manufactured from 50 - 150mm and passes 1 hour fire test with PVC windows and up to 150mm cavities.
Supplied in 2.4m lengths.
Thermabate Cavity Closers
Thermabate provides a simple and efficient method of closing cavities, preventing condensation, pattern
staining and mould growth frequently associated with traditional methods of closing cavities. The need for
cut bricks or blocks to close the cavity is eliminated.
Available to suit 50- 110m cavities.
Supplied in 3m lengths
SF Multicloser
A versatile and economic PVCu insulated closer for cavity widths between 50 and 100mm.
Second fix applications.
Stock Lengths: 2.4m
Packing: 10 lengths per pack
TF Multicloser
A versatile insulated cavity closer that is easy to use to achieve building regulations where cavity widths are
100mm-150mm. Can be used for first or second fix.
Stock Lengths: 2.4m
57
58
TF1000
A versatile insulated closer for cavities between 50 and 100mm (5mm increments). Suitable for first or
second fix applications. Check reveal option also available.
Stock Lengths: 2.1m and 3.0m
TF2000
A versatile insulated closer for wider cavities between 110 and 160mm (5mm increments).
Suitable for first or second fix applications. Check reveal option also available.
Stock Lengths: 2.1m and 3.0m
Fire Protection
Masonry Cavity Stop Sock 552
Provides up to 2 hours fire performance with a minimum of 1 hour, the polythene enclosed
non-combustible rockfibre barrier is manufactured in bespoke sizes to suit the specified cavity width and is
installed under compression. It is installed as the outer brickwork and inner blockwork is built up. Suitable
for external cavities from 50mm - 175mm.
Timber Frame Cavity Barrier 551
Provides up to 2 hours fire performance with a minimum of 1 hour, the polythene enclosed non-combustible
rockfibre barrier is manufactured in bespoke sizes to suit the specified cavity width and is installed under
compression. It is stapled to the inner timber sheathing before the brickwork is built up. Suitable for external
cavities from 50mm-175mm.
Linear Firestop Strip 553 & 554
Rectangular strips of non-combustible rockfibre to provide up to four hours firestopping at the junctions of
compartment walls and floors. Firestop Strips are manufactured to order for voids of 10mm-100mm and
the maximum void size that can be filled is 50% of the wall width.
www.sig-ca.co.uk
Acoustic Party Wall DPC557
Helps reduce flanking sound transmission at the junction of internal separating and external cavity walls
and is protected by its integral dpc. The product consists of tissue faced rockfibre slab laminated to black
polyethylene dpc.
Acoustic Party Wall DPC557 provides 60 minutes fire resistance to BS 476 Part 20:1987 and meets the
requirements of 2003 Approved Document E (Sound Resistance) and Robust Details Part E.
Suitable for external cavities from 50mm-150mm
AIM Wall Cavity Fire Barrier
High density foil-faced rockfibre slab intended for installation within masonry wall applications and is
capable of providing up to 4 hours fire performance within cavities up to 600mm in overall width. The
barrier is available in either full slabs to be cut on site or in a pre-manufactured section to suit the desired
cavity width.
AIM Cavity Fire Closer
Rockfibre section bonded to a DPC layer which is intended for installation at blockwork return reveals within
masonry wall applications. Cavity Fire Closer complies with Part E of the Building Regulations. and provides
up to 60 minutes fire performance.
AIM Fire Stop Strip
AIM Fire Stop Strip is a high density mineral fibre strip which provides a fire and acoustic barrier when
positioned within linear voids in masonry wall applications. Will accommodate voids up to 100mm in
overall depth. The product is manufactured to suit the overall void and will achieve up to 4 hours fire
performance. Fire Stop Strip is commonly located at the top of masonry wall locations and vertically within
joints within the masonry skin.
Voids: 10mm-100mm
Length: 1200mm
AIM Fire Stop Block
AIM Fire Stop Blocks are mineral fibre based infill blocks which are commonly located within trapezoidal
profiles to the top of masonry walls. Fire Stop Blocks are manufactured to suit the specified trapezoidal
profile and are held in place under compression.
Ventilation
Telescopic Underfloor Ventilator
This is designed to provide ventilation below suspended ground floors. The ventilator is telescopic and can
be adjusted vertically between 3 and 5 brick courses.
Quantity: 20 Per Box
59
60
Vertical Extension Sleeve
The extension sleeve allows the ventilator to be extended vertically by a further 2 brick courses.
Horizontal Front Extension Sleeve
This fits between the airbrick and upper front opening of the telescopic underfloor ventilator to
accommodate external walls of more than 102.5mm thickness up to 215mm.
Horizontal Rear Extension Sleeve
This fits on the lower rear opening of the telescopic underfloor ventilator to accommodate cavity widths
between 50-150mm – or internal walls of more than 100mm thickness, up to a maximum of 200mm.
Airbrick
This is used in conjunction with the telescopic underfloor ventilator for providing ventilation below
suspended ground floors and used with cavity sleeves for providing ventilation through external walls to a
building interior. The airbricks can be clipped together to form a 9” x 6” or 9” x 9” airbrick.
Available in Buff, Terracotta, Grey, Brown, Black & White.
Cavity Sleeves
This is used to provide ventilation through the external walls to the interior of a building. The product can
accommodate 9” x 3”, 9” x 6” & 9” x 9” airbricks.
Weep Vent / Concealed Weep
The Weep Vent is intended for use with standard brick, block or stone external walls of thickness between
100 – 102.5mm.
The Weep Vent is available in Buff, Terracotta, Grey, Brown, Black, White* or Clear. (50 per box)
The Concealed Weep is available in Buff, Terracotta, Grey, Brown*, Black*, Clear or White* (50 per box)
*Special Order Product
www.sig-ca.co.uk
External Render
Renders
weber.pral M
A one-coat, ready-mixed, cementitious, weather resistant, external decorative, through-coloured render,
suitable for most types of brick or blockwork. Available in a range of 12 standard and 24 special colours, and
BBA approved.
Size: 25kg
Flexirend Highbuild
A decorative and protective resin based surface coating for application to exterior and interior surfaces. It
is a high quality, weather resistant finish, which may be textured to a variety of designs. It is available in a
range of colours and provides a superior quality appearance to cement rendering, concrete and many other
backing materials.
Size: 15kg
Alpine - White travertine finish
Alpine finish is a white cement based mix containing aggregates that provides a decorative travertine finish.
• Enhances the protection of a traditional rendering system
• Suitable for external or internal use
• Ideal for application onto primed weber.rend OCR or other cement based render
Size: 25kg
CuIlamix tyrolean
Cullamix tyrolean is a white or coloured cement based mix, which provides a decorative and protective
rendering. It is applied by hand or power operated machines and provides an open honeycomb textured
(Tyrolean) finish.
• Suitable for internal or external use
• Suitable for most environments - coastal, town suburban and rural
Size: 25kg
weber.rend aid
Used to achieve a good key for rendering onto smooth or otherwise unsuitable but sound surfaces. Ideal as a
pre-treatment for renderings required to resist severe exposure conditions. Suitable substrates include dense
concrete, brick & blockwork, masonry and clean sound well adhered existing render (<19mm).
Size: 25kg
61
62
Branch Details
Aberdeen
Silverburn place, Bridge of Don
Aberdeen, AB23 8EG
Tel: 01224 822 798
Fax: 01224 823 741
Ash Vale
Lysons Link South, Lysons Avenue
Ash Vale, Surrey, GU12 5GN
Tel: 01252 527000
Fax: 01252 527001
Bedford
Telford Way, Bedford, MK42 0PQ
Tel: 01234 268 427
Fax: 01234 268 057
Birmingham
Apollo Park, Rounds Green Road,
Oldbury, West Midlands, B69 2DF
Tel: 0121 5220200
Fax: 0121 5220201
Eurocentral
Plot C, Coddington Crescent,
Eurocentral, Holytown, Motherwell,
North Lanarkshire, ML1 4YF
Tel: 01698 731910
Fax: 01698 731911
Geotechnical Centre
Unit 2, Warrington South Distribution Park,
Lyncastle Road, Warrington, WA4 4SN
Tel: 0844 443 0050
Fax: 0844 443 0051
Glasgow
21 Dava Street, Glasgow, G51 2JA
Tel: 0141 445 7960
Fax: 0141 445 1078
Inverness
28 Harbour Road, Inverness, IV1 1UA
Tel: 01463 701 200
Fax: 01463 701 201
Bristol
Unit 13, Concorde Rd, Patchway Trading
Estate, Bristol, BS34 5TB
Tel: 0117 301 3620
Fax: 0117 301 3621
Leeds
Intermezzo Drive, Pontefract Road,
Stourton, Leeds, LS10 1RU
Tel: 0844 443 0052
Fax: 0844 443 0053
Cardiff
Southpoint Foreshore Road,
Cardiff, CF10 4SP
Tel: 029 20465553
Fax: 029 20493089
Manchester
The Parkway Centre, Longbridge Road,
Trafford Park, Manchester, M17 1SN
Tel: 0161 872 5464
Fax: 0161 872 5399
Chesterfield
Unit 1, Sheepbridge Centre, Sheepbridge
Lane, Chesterfield, S41 9RX
Tel: 01246 572 595
Fax: 01246 572 596
Norwich
Unit 27, White Lodge Business Park,
Hall Road, Norwich , NR4 6DQ
Tel: 01603 224 899
Fax: 01603 224 898
Oxford
Unit 5, Curbridge Business Park, Downs
Road, Witney, Oxfordshire, OX29 7WJ
Tel: 01993 704289
Fax: 01993 708993
Plymouth
87 St. Modwen Road, Parkway Industrial
Estate, Marsh Mills, Plymouth, PL6 8LH
Tel: 01752 894965
Fax: 01752 895896
Ruislip
Unit 4, Victoria Road Retail Park, Crown
Road, South Ruislip, London, HA4 0AF
Tel: 020 8606 8060
Fax: 020 8606 8070
Thurrock
Victor House, Bay Manor Lane,
Essex, RM20 3LL
Tel: 020 8591 9991
Fax: 020 8591 9992
Tyneside
Federation Business Park, St Omers Road,
Dunston, Tyne and Wear, NE11 9EE
Tel: 0191 487 4983
Fax: 0191 491 5790
Middle East Branch Network.
United Arab Emirates.
Abu Dhabi
SIG Middle East LLC, Mohammed Bin Zayed
Stadium, PO Box 107729, Abu Dhabi
Tel: +971 2 4950500
Fax: +971 2 4454672
Qatar
Doha
SIG Middle East WLL, Salwa Road,
PO Box 23856, Doha.
Tel: +974 4 4694500
Fax: +974 4 4694900
Dubai
SIG Middle East LLC, Dubai Investment Park
PO Box 215851, Dubai
Tel: +971 4 8858399
Fax: +971 4 8858398
Kingdom of Saudi Arabia
Riyadh
PO Box 9855, Riyadh 11423
Tel: +966 11 2926969
Fax: +966 11 4720439
www.sig-ca.co.uk
Sultanate of Oman
Muscat
SIG Middle East LLC, Wolf Developments
Ghala Industrial Estate, PO Box 136,
Postal Code 103
Tel: +968 2 4505517
Fax: +968 2 4502304
Email: [email protected]
Huge range – fast service
Our products can be delivered exactly where and when you
need them via our fast, flexible and reliable vehicle fleets
SIG Construction Accessories:
• Waterproofing
• Brickwork Accessories
• Concrete Repair & Protection
• Reinforcement & Formwork
• Groundwork Engineering Products
• Flooring & Tiling
• Grouts & Anchors
• Sealants & Fillers
• Ventilation
• External Renders
For full details of your local branch
call us today or visit our websites:
www.sig-ca.co.uk
Merchant
SUPPORT CENTRE
5
Bristol
Tel: 0800 028 5440
Fax: 0117 301 3621
13
Manchester
Tel: 0800 183 2728
Fax: 0161 786 8069
18
Thurrock
Tel: 08717 812 926
Fax: 020 8591 9992
11
1
19
Tyneside
Tel: 0800 028 6779
Fax: 01914 915 760
SIG CA Branches
1 Aberdeen
Tel: 01224 822 798
Fax: 01224 823 741
11 Inverness
Tel: 01463 701 200
Fax: 01463 701 201
2 Ash Vale
Tel: 01252 527000
Fax: 01252 527001
12 Leeds
Tel: 0113 385 7760
Fax: 0113 385 7761
Bedford
Tel: 01234 268 427
Fax: 01234 268 057
Manchester
Tel: 0161 872 5464
Fax: 0161 872 5399
4 Birmingham
Tel: 0121 5220200
Fax: 0121 5220201
14 Norwich
Tel: 01603 224 899
Fax: 01603 224 898
Bristol
Tel: 0117 301 3620
Fax: 0117 301 3621
Oxford
Tel: 01993 704289
Fax: 01993 708993
6 Cardiff
Tel: 029 20465553
Fax: 029 20493089
16 Plymouth
Tel: 01752 894965
Fax: 01752 895896
Chesterfield
Tel: 01246 572 595
Fax: 01246 572 596
Ruislip
Tel: 020 8606 8060
Fax: 020 8606 8070
Eurocentral
Tel: 01698 731910
Fax: 01698 731911
Thurrock
Tel: 020 8591 9991
Fax: 020 8591 9992
9 Geotechnical Centre
Tel: 0844 443 0050
Fax: 0844 443 0051
19 Tyneside
Tel: 0191 487 4983
Fax: 0191 491 5790
3
5
7
8
10 Glasgow
Tel: 0141 445 7960
Fax: 0141 445 1078
10 8
19
13
12
15
9
13
7
4
14
17
3
15
18
6
17
5
18
2
16
www.sig-ca.co.uk
[email protected]
We now do business in the Middle East. For full branch details see page 62.
All rights reserved. No part of this publication may be reproduced or transmitted in any form, or by any means, electronic or mechanical including photocopy,
recording or any information storage and retrieval system, without permission in writing from SIG Trading Ltd. No information contained within this publication
can be used to compile any other printed or electronic directory or mailing list. Whilst every effort has been made to ensure accuracy, the publisher does not, under
any circumstances, accept responsibility for errors or omissions. Copying of the images contained in this publication, in any form without the author’s permission, is an
unlawful act under the Copyright Designs and Patent Act 1988.
E&OE

SIG-CA-Merchant-Guide - SIG Construction Accessories

Transcription

Similar documents

Sydney Harbour Bridge Waterproofing and Restoration

case study jordan commons

Honeyman Hardware Lofts

GranQuartz - Ameripolish

GranQuartz

Concrete Sound Barrier Broucher

Bridge Deck Waterproofing on Sydney Harbour Bridge, Australia

RMC

Construction Chemicals