stainless steel

Transcription

stainless steel

Dynaflex Products, 6466 Gayhart Street, City of Commerce, CA 90040
Tel: (800) 334-3363 • Fax: (323) 838-1332
www.dynaflexproducts.com
WAREHOUSES
Southwest
15015 Beltwood Parkway East
Addison, TX 75001-3716
Tel: (972) 233-9996
Fax: (972) 386-8891
Southeast
1015 Grant Street S.E.
Atlanta, GA 30315
Tel: (800) 554-5450
Fax: (404) 622-0481
150B • 2003
TABLE OF CONTENTS
Adapters - Beaded.........................64
Aluminum Tubing............................106
Ball Joints.......................................75-77
Battery Tie-Downs..........................111
Bellows Assemblies........................77-84
School Bus Exhaust Pipes ............30
CapsInlet...........................................104-105
Rain .........................................55
Stack.........................................55
ClampsAir Inlet......................................107
E-Z Seal Flatband.....................72
Flat Band...................................70
Full Circle..................................68
Hanger......................................69
Heavy-Duty ..............................70-71
Mounting Bracket......................70
Muffler.......................................70-71
Muffler Shield............................90
OEM Wide Band Butt Joint.......53
OEM Wide Band Socket Joint...54
TorcTite Exhaust ......................73
Tru-Seal Strap...........................72
V-Band with Hinge....................86
V-Band Manifold........................62
ConnectorsFlexible Exhaust ......................74-75
Manifold....................................63
Tilt Cab ....................................60-61
Tube/Turbo................................66-68
CouplersFlex Hose..................................56
DividersExhaust “Y”...............................56-57
Exhaust “T”...............................58-59
ElbowsAdjustable.................................30
90-Deg Standard Radius..........2
90-Deg Long Lengths ..............2
90-Deg Short Radius................4
90-Deg Long Lengths...............4
45-Deg Standard Radius..........6
45-Deg Short Radius ...............7
180-Deg Standard Radius........3
180-Deg Short Radius..............5
Tangent Ends Standard............3
Tangent Ends Short Radius......5
Expanders/Reducers......................59-60
FlangesBolted Plate .............................77
Flared & Special.......................63-65
Manifold....................................66
Flexible Metal Tubing.....................74-75
Grab Handles.................................90 & 92
Guard AssembliesStack & Mufflers........................87-89 & 92
Hanger Clamps .............................69
HosesTurbo-Chargers.........................110
Mufflers . ........................................94-103
Muffler-Stacks.................................91
OEM ComponentsCummins...................................8
Detroit Diesel............................8-9
Freightliner................................9-13
General Motors.........................14-15
Ford...........................................15-16
International Harvester..............17
Kenworth...................................18-22
Mack.........................................22-25
Peterbilt.....................................25-28
Western Star.............................29
OEM Shields & Guards..................87-89
Replacement PartsGasket.......................................85
Retainer....................................85
Resonators ....................................90
Rubber Components & Hoses.......108-109
Spark Arrestor................................93
Spool & Lower Stack Piece............40
StacksCar Hauler/Dump Truck............35
Curved......................................36,39 & 42
Long Curved ............................37
Mitered .....................................33,39 & 41
Slash Cut..................................38 & 42
Straight......................................32,39 & 41
6-5,7-5,8-5 Reduced.................34 & 43
Stacks- (OEM)
Freightliner................................49
Kenworth . ................................50-51
Peterbilt.....................................46-48
Western Star ............................52
Tube ConnectorsDisconnect ...............................67
Stack Breaker...........................67
TubingAluminum..................................106
Flexible Metal . .........................74-75
Straight & Bendable..................31
“Z” Series Explanation....................44-45
90o ELBOWS
STANDARD RADIUS
LL
STYLE 10
EXPANDED END
AND SLOTTED END
LL
LL
RR
LL
R
R
SIZE
LL
STYLE 10P
PLAIN ENDS
LL
RADIUS = 2 TIMES TUBE DIAMETER
RR
STANDARD MATERIAL 16 GAUGE COLD ROLLED ALUMINUM KILLED STEEL
FLASH CONTROLLED ELECTRIC WELD WITH SMOOTH INSIDE RADIUS
2”
21/4”
21/2”
23/4”
3”
31/2”
4”
41/2”
5”
6”
PART NO.
10-200
10-225
10-250
10-275
10-300
10-350
10-400
10-450
10-500
10-600
L
6”
61/2”
7”
8”
81/2”
10”
111/2”
13”
14”
17”
R
4”
41/2”
5”
51/2”
6”
7”
8”
9”
10”
12”
GAUGE
16
16
16
16
16
16
16
16
16
16
R
90o ELBOWS
LONG LENGTHS
STANDARD RADIUS
LL
LL
LL
RR
RR
EXAMPLE
10-500S
LL
LL
STYLE 10PL
PLAIN ENDS
STYLE 10L
EXPANDED &
SLOTTED END
LL
PART NO.R
10P-200
10P-225
10P-250
10P-275
10P-300
10P-350
10P-400
10P-450
10P-500
10P-600
ALTERNATE MATERIALS:
EXAMPLE ALTERNATE MATERIALS (CONT):
ADD CP FOR CHROME PLATE
10-400CP ADD S FOR STAINLESS STEEL
ADD AZ FOR ALUMINIZED (2”-6” Only)
10-400AZ
LL
LL
RR
LL
R
STANDARD MATERIAL 16 GAUGE COLD ROLLED ALUMINUM KILLED STEEL R
SIZE
2”
21/4”
21/2”
23/4”
3”
31/2”
4”
41/2”
5”
6”
PART NO.
10L-200
10L-225
10L-250
10L-275
10L-300
10L-350
10L-400
10L-450
10L-500
10L-600
L
9”
91/2”
101/2”
111/2”
121/2”
141/2”
16”
17”
18”
23”
R
4”
41/2”
5”
51/2”
6”
7”
8”
9”
10”
12”
GAUGE
16
16
16
16
16
16
16
16
16
16
LL
PART NO.
10PL-200
10PL-225
10PL-250
10PL-275
10PL-300
10PL-350
10PL-400
10PL-450
10PL-500
10PL-600
EXAMPLE ALTERNATE MATERIALS (CONT.):
10L-400CP ADD S FOR STAINLESS STEEL
10L-400AZ
EXAMPLE
10-400S
2
STANDARD RADIUS
TANGENT ENDS
o
90 60o 45o 30o 15o ELBOWS
90°
60°
R
15°
30°
45°
R
R
R
R
STYLE 10T
STANDARD MATERIAL COLD ROLLED ALUMINUM KILLED STEEL 16 GAUGE
SIZE
2”
21/4”
21/2”
23/4”
3”
31/2”
4”
5”
90°
6”
PART NO.
10T-200-90
10T-225-90
10T-250-90
10T-275-90
10T-300-90
10T-350-90
R
10T-400-90
10T-500-90
10T-600-90
PART NO.
10T-200-60
10T-225-60
10T-250-60
10T-275-60
10T-300-60
10T-350-60
L
10T-400-60
10T-500-60
60°
10T-600-60
R STEEL
ADD S FOR STAINLESS
W
PART NO.
10T-200-45
10T-225-45
10T-250-45
10T-275-45
10T-300-45
10T-350-45
10T-400-45
45°
10T-500-45
10T-600-45
EXAMPLE
10T-400-90AZ
10T-400-90S
R
PART NO.
10T-200-30
10T-225-30
10T-250-30
10T-275-30
10T-300-30
10T-350-30
30°
10T-400-30
10T-500-30
10T-600-30
R
PART NO.
10T-200-15
10T-225-15
10T-250-15
10T-275-15
10T-300-15
10T-350-15
15°
10T-400-15
10T-500-15
10T-600-15
R
R
4”
41/2”
5”
51/2”
6”
7”
8”
10”
12”
R
STANDARD RADIUS
180o U-BENDS
STANDARD MATERIAL COLD ROLLED
ALUMINUM KILLED STEEL16 GAUGE
R
W
STYLE 10U
RADIUS = 2 TIMES
TUBE DIAMETER
L
SIZE
2”
21/4”
21/2”
23/4”
3”
31/2”
4”
5”
6”
PART NO.
10U-200
10U-225
10U-250
10U-275
10U-300
10U-350
10U-400
10U-500
10U-600
L
10”
111/2”
121/2”
131/2”
15”
18”
20
25”
30”
*ADD S FOR STAINLESS STEEL
*SPECIAL ORDER ONLY
R
4”
41/2”
5”
51/2”
6”
7”
8”
10”
12”
EXAMPLE
10U-400AZ
10U-400S
W
8”
9”
10”
11”
12”
14”
16”
20”a
24”
L
STYLE 11
EXPANDED &
SLOTTED END
L
STYLE 11P
PLAIN ENDS
RADIUS = TUBE DIAMETER
L KILLED STEEL R
16 GAUGE
ALUMINUM
R STANDARD MATERIAL
R
L
R COLD ROLLED
L
L
L
L
L
SHORT
RADIUS
L
L
90o ELBOWS
SIZE
2”
21/4”
21/2”
3/4”
2L
3”
31/2”
4”
41/2”
5”
R 6”
8”
10” **
12” **
PART NO.
11-200
11-225
11-250
11-275
11-300
11-350
11-400
11-450
11-500
11-600
11-800
L
11-1000
11-1200
L
4”
4”
41/2”
5”
51/2”
61/2”
71/2”
8”
9”
L11”R
15”
19”
23”
L
R
2”
21/4”
21/2”
/4”
23L
3”
31/2”
4”
41/2”
5” R
6”L
8”
10”
12”
GAUGE
16
16
16
16
16
16
16
16
16
16
15 L
12
12
PART NO.
11P-200
11P-225
11P-250
11P-275 L
11P-300
11P-350
11P-400
11P-450
11P-500
11P-600 L
11P-800
11P-1000
11P-1200
EXAMPLE: ALTERNATE MATERIALS (CONT.):
11-400CP ADD S FOR STAINLESS
STEEL
L
R
R
L
R
11-400AZ
**WELDED CONSTRUCTION
L
SHORT RADIUS
90 ELBOWS LONG
L LENGTHS
o
STYLE 11L
EXPANDED &
SLOTTED END
L
R
R
L
EXAMPLE:
11-400S
L
L
STYLE 11PL
PLAIN ENDS
L
R
COLD ROLLED
ALUMINUM KILLED STEEL R
R STANDARD MATERIAL 16 GAUGE
R
FLASH CONTROLLED ELECTRIC
WELD WITH SMOOTH INSIDE RADIUS
L
SIZE
PARTLNO.
L
R
GAUGE
PART NO.
2”
21/4”
21/2”
23/4”
3”
31/2”
4”
41/2”
5”
6”
8”
10” **
12” **
11L-200
11L-225
11L-250
11L-275
11L-300
11L-350
11L-400
11L-450
11L-500
11L-600
11L-800
11L-1000
11L-1200
6”
63/4”
71/2”
81/4”
9”
10”
12”
131/2”
15”
17”
24”
30”
36”
2”
21/4”
21/2”
23/4”
3”
31/2”
4”
41/2”
5”
6”
8”
10”
12”
16
16
16
16
16
16
16
16
16
16
15
12
12
L
11PL-200
11PL-225
11PL-250
11PL-275
11PL-300
11PL-350
11PL-400
11PL-450
11PL-500
11PL-600
11PL-800
11PL-1000
11PL-1200
11L-400AZ
EXAMPLE:
11-400S
SHORT RADIUS
TANGENT ENDS
o
90 60o 45o 30o 15o ELBOWS
90°
R
R
15°
30°
45°
60°
R
R
R
STYLE 11T
TANGENT ENDS
STANDARD MATERIAL COLD ROLLED ALUMINUM KILLED STEEL
SIZE
2”
21/4”
21/2”
23/4”
3”
31/2”
4”
41/2”
5”
6”
8”
10” **
12” **
GAUGE
R
16
16
16
16
16
16R
16
16
16
90° 16
12
12
12
R
PART NO.
11T-200-90
11T-225-90
11T-250-90
11T-275-90
11T-300-90
11T-350-90
11T-400-90
11T-450-90
11T-500-90
60°
11T-600-90L
11T-800-90
11T-1000-90
11T-1200-90
R CONSTRUCTION
10” & 12” ARE WELDED
W
ADD S FOR STAINLESS STEEL
PART NO.
11T-200-60
WELD
11T-225-60
11T-250-60
11T-275-60
11T-300-60
11T-350-60
11T-400-60
11T-450-60 45°
11T-500-60
11T-600-60
11T-800-60
11T-1000-60
11T-1200-60
R
EXAMPLE
11T-500-90AZ
11T-500-90S
PART NO.
11T-200-45
11T-225-45
11T-250-45
11T-275-45
11T-300-45
11T-350-45
11T-400-45
11T-450-45 30°
11T-500-45
11T-600-45
11T-800-45
11T-1000-45
11T-1200-45
R
PART NO.
11T-200-30
11T-225-30
11T-250-30
11T-275-30
11T-300-30
11T-350-30
11T-400-30
11T-450-3015°
11T-500-30
11T-600-30
11T-800-30
11T-1000-30
11T-1200-30
R
R
PART NO.
11T-200-15
11T-225-15
11T-250-15
11T-275-15
11T-300-15
11T-350-15
11T-400-15
11T-450-15
11T-500-15
11T-600-15
11T-800-15
11T-1000-15
11T-1200-15
SHORT RADIUS
180o U-BENDS
WELD
ALUMINUM KILLED STEEL16 GAUGE
R
L
W
WELDED CONSTRUCTION
SIZE
2”
21/4”
21/2”
23/4”
3”
31/2”
4
41/2”
5”
6”
PART NO.
11U-200
11U-225
11U-250
11U-275
11U-300
11U-350
11U-400
11U-450
11U-500
11U-600
L
6”
63/4”
71/2”
81/4”
9”
10”
12”
131/2”
15”
17”
*SPECIAL ORDER ONLY
R
2”
21/4”
21/2”
23/4”
3”
31/2”
4
41/2”
5”
6”
EXAMPLE
11U-500AZ
11U-500S
W
4”
41/2”
5”
51/2”
6”
7”
8”
9”
10”
12”
LL LL
LL LL
RR RR
LL LL
STANDARD RADIUS
45o ELBOWS
STYLE 12
EXPANDED &
SLOTTED END
LL LL
STYLE 12P
PLAIN ENDS
RR RR
SIZE
2”
21/4”
21/2”
23/4”
3”
31/2”
4”
41/2”
5”
6”
PART NO.
12-200
12-225
12-250
12-275
12-300
12-350
12-400
12-450
12-500
12-600
L
4”
41/2”
5”
51/2”
51/2”
61/2”
7”
71/2”
8”
10”
R
4”
41/2”
5”
51/2”
6”
7”
8”
9”
10”
12”
GAUGE
16
16
16
16
16
16
16
16
16
16
PART NO.
12P-200
12P-225
12P-250
12P-275
12P-300
12P-350
12P-400
12P-450
12P-500
12P-600
EXAMPLE:
12-500CP ADD S FOR STAINLESS STEEL
12-500S
12-500AZ
STANDARD RADIUS
45o ELBOWS LONG LENGTHS
STYLE 12L
EXPANDED &
SLOTTED END
LL LL
STYLE 12PL
PLAIN ENDS
LL LL
LL LL
LL LL
RR RR
RR RR
SIZE
2”
21/4”
21/2”
23/4”
3”
31/2”
4”
41/2”
5”
6”
PART NO.
12L-200
12L-225
12L-250
12L-275
12L-300
12L-350
12L-400
12L-450
12L-500
12L-600
L
7”
71/2”
8”
8”
81/2”
91/2”
111/2”
12”
131/2”
17”
R
4”
41/2”
5”
51/2”
6”
7”
8”
9”
10”
12”
GAUGE
16
16
16
16
16
16
16
16
16
16
PART NO.
12PL-200
12PL-225
12PL-250
12PL-275
12PL-300
12PL-350
12PL-400
12PL-450
12PL-500
12PL-600
EXAMPLE:
12-500S
12L-500AZ
L
L STYLE 13P
STYLE 13
EXPANDED &
PLAIN ENDS
SLOTTED END
STANDARD MATERIAL COLD
R ROLLED
R ALUMINUM KILLED STEEL
L
R
L
R
L
L
L
L
SHORT
RADIUS
45o ELBOWS
L
SIZE
2”
21/4”
21/2”
L23/4”
3”
31/2”
4”
41/2”
5”
6”
8”
10” **
12” **
PART NO.
13-200
13-225
13-250
13-275
13-300
13-350
13-400
13-450 L
L 13-500
13-600
13-800
L
13-1000
13-1200
L
3”
3”
31/2”
L33/4”
4”
41/2”
5”
51/2”
6” RRL
7”
9”
11”
12”
L
R
2”
21/4”
21/2”
23/4”
L
3”
31/2”
4”
41/2”
5”
6”
8”
10”
12”
L
GAUGE
16
16
16
16
16
16
16
16
16
16
15
L
12
12
L
R
PART NO.
13P-200
13P-225
13P-250
13P-275
L
13P-300
13P-350
13P-400
13P-450
L 13P-500
R
13P-600
13P-800
13P-1000
13P-1200
ADD AZ FOR ALUMINIZED (2”-6”
13L-500AZ
WELDED CONSTRUCTION
R
R Only)
R **R
STYLE 13
EXPANDED &
SLOTTED END
SHORT RADIUS
L L
45o ELBOWS
LONG LENGTHS
L
L
L
R
L
L
EXAMPLE:
13-500S
STYLE 13P
PLAIN ENDS
L
RADIUS
R
R
R = TUBE DIAMETER
SIZE
2”
21/4”
21/2”
23/4”
3”
31/2”
4”
41/2”
5”
6”
8”
10” **
12” **
PART NO.
13L-200
13L-225
13L-250
13L-275
13L-300
13L-350
13L-400
13L-450
13L-500
13L-600
13L-800
13L-1000
13L-1200
L
L
L
5”
51/2”
6”
61/2”
7”
8”
9”
10”
11”
13”
14”
16”
17”
R
2”
21/4”
21/2”
23/4”
3”
31/2”
4”
41/2”
5”
6”
8”
10”
12”
GAUGE
16
16
16
16
16
16
16
16
16
16
15
12
12
PART NO.
13PL-200
13PL-225
13PL-250
13PL-275
13PL-300
13PL-350
13PL-400
13PL-450
13PL-500
13PL-600
13PL-800
13PL-1000
13PL-1200
13L-500AZ
EXAMPLE:
13-500S
- OEM EQUIVALENT - EXHAUST COMPONENTS INTERCHANGE
DYNAFLEX P/N: 14 XX-X 0000
LAST 4 DIGITS OF OEM P/N
SERIES NO.:
CODE NO.:
CT =
CU =
DD =
FD =
FL =
GM =
CATERPILLAR TRACTOR
CUMMINS
DETROIT DIESEL
FORD
FREIGHTLINER
GENERAL MOTORS
IH = KW = MK = PB = WM =
WS = SIDE CODE:
R = RIGHT SIDE
L = LEFT SIDE
(BLANK) = NOT APPLICABLE
INTERNATIONAL HARVESTER
KENWORTH
MACK
PETERBILT
WHITE MOTORS
WESTERN STAR
CUMMINS / DETROIT DIESEL
CUMMINS
90-Degree Cobra Rubber Elbow
space saver
Saves Room for Neater Installation
6 1/2"
For use over turbo-charger for a sharp corner from the air cleaner on Detroit G U
Series Diesel Engines, Cummins, Oshkosh and Others.
6 1/ 2 "
8"
CUMMINS
#190351
6 1/2"
6 1/2"
1.5
4
2.799
6.44
8"
5"
8"
8"
o
90 14CU-0351
o
90 14CU-0351AZ
45o 14CU-0351-45AZ
2
5"
4
90°5"
Cobra Rubber Elbow
DYNAFLEX PART NO. 92C B-400
ADD AZ FOR ALUMINIZED (2”-6”)
5"
4 1/ 2 "
4 / 2"
1
3"
O.D.
4 1 / 2"
DETROIT DIESEL
3"
I.D.
3"
I.D.
3"
I.D.
63DD-300
BELLOWS REPLACEMENT FOR:
3"
14DD-4964 14DD-1394 14DD-4408
O.D.
14DD-2724 14DD-1696
3"
O.D.
3"
O.D.
4 1/8"
4 1/8"
2"
2"
2"
14DD-4408
DD = 5104408
4 1/8"
14DD-0280
DD = 8920280
O.D.
16"
3" O.D.
14.62"
3" O.D.
6 3 / 4"
84
O
6 /"
detroit
diesel (cont.)
3
2"
6 3/4"
2"
3" O.D.
4
2"
5"
5.15"
O.D. 5"
O.D.5.15"
O.D.
O.D.
5"
5"5"
5.15"
5.15"
O.D.
O.D.
5" O.D.
5.15"O.D.
O.D.
O.D.
14DD-1814
DD = 5101814
O
16"
16"
3"3"O.D.
16"
O.D.
3" O.D.
16"
O
O
3" O.D.
3" O.D.
14.62"
14.62"
3"3"O.D.
O.D.
3" O.D.
14.62"
14.62"
14.62"
3" O.D.
3" O.D.
16"
O
8484
84
16"
O
84
6 63/43"/4"
14.62"
6 3/ 4 "
3" O.D.
2"2"
84
(SEE
PAGE 56)
14"
3" O.D.
50
14DD-1394
DD = 5101394
O
14DD-1413
10"
DD = 5101413
5 1/2"
14DD-2724
DD = 8922724
3” O.D.
16"
5"
5"
50
5"5"
" O.D.
5"
R
O
16"
10"
6 /4"
14"
16"
16"
14"H
14"
14"
DIA.
5 1/2"
5 1/2"
14"
3" O.D.
3" O.D.
16"
14DD-4964
L
DD = 8924964
6 3/4"
FREIGHTLINER
6 /4"
3
R
H
RR
DIA.
R
DIA.
DIA.
DIA.
DIA. H
L
L
50
O
50
FREIGHTLINER
PART NO.
15 1/2"
H
A04-09601-000
A04-09828-000 A04-09829-002 HH
A04-09831-000 A04-09831-002 50
O
10"
O
5050
O
3"3"O.D.
O.D.
1 1
5 5/2"/2"3" O.D.
5 1/2" 3" O.D.
R
3" O.D.
16"
3
10"
O
10"
10"
15 10"
/2 "
1
14DD-1696
DD = 5101696
3" O.D.
3" O.D.
DYNAFLEX
DIA.
“R”
“H”
“L” BRACKET
6 3/4"
3"3"O.D.
PART NO.
SUPPORT
O.D.
3
3
14FL-B9601AZ
5” 5”
8” 10” YES
6 6/4"/4" 3" O.D.
1/2” 1/2” 14FL-1000-400
4”
4”
8
10
YES
6 3/4"
NO
14FL-9000
5” 5” 67/8” 8” 14FL-1000 5” 5” 103/4” 71/2” YES
14FL-1002 5” 5” 101/21” 91/8” YES
15 /2"
15 1/2"
15151/21"/2"
4"
0°
5" OD
5"
OD
5"
OD
5"
5"OD
OD26 1/2" 1
1/12"
26
26
5" OD
26
26/2/1"2/"2"
5" R
26 1/2"
5"
R
5"
5"
14"
5"RRR
14"
14"
14"
14"
5" R
FREIGHTLINER EXHAUST
OEM ASSEMBLIES
5" R
5" I.D
5" I.D
5"
I.D
5"
I.D
5"
5"I.D
I.D
5"
12"
12"
90°
110°
110°
110°
110°
110°
10
/
90°
1 2
/
1 2
1 /12
1 2
1110000/21/ /2
1
10
FREIGHTLINER
#04-09829-001
SIZE DYNAFLEX PART NO.
5”
14FL-9001
5”
14FL-9001CP
6 /2
1
6 1/2
100°
TILT CAB
BOTTOM TILT FLG. ELBOW
FREIGHTLINER #A04-09829-002
5"
5" R
5"
R
5"
5"
5"RRR
5" R
66611//122/12
6 /2
5" R
FREIGHTLINER MODEL 120
5" R1988 TO 1997
5"
R
CONVENTIONAL
CAB
5"
5"
5"RROF
R SLEEPER
IN FRONT
100°
100°
100°
100°
100°
6 1/2
1987 TO PRESENT
12"
12"
12"
12"
5" R
5" R
5"
R
5"
5"
5"RRR
90°
90°
90°
90°
12"
12"
12"
12"
12"
FREIGHTLINER #04-09586-017
#04-09586-015
12"
#04-09586-013
SIZE
DYNAFLEX PART NO.
5”
14FL-6015
5”
14FL-6015CP
6”
14FL-6015-600CP
6” - 5” 14FL-6015-6050CP
6” - 5” 14FLX-6015-6050CP
WITH EXTENSION
11"
5" R
2 PL
SIZE
5”
5”
6”-5”
SINGLE OR DUAL
5"
5"
5"
5" EXHAUST 90° ELBOW-
11"
.D.
.. .
5" O " OO..D
D
.D
D.
555""O
.
5" O
.D.
5" O
6 1/2 1
6661//122/12
6 /2
6.88"
5"
5"
5"
5"
6.88"
6.88"
6.88"
6.88"
6.88"
14FL-9000
5”
14FL-9000CP
5”
5"
5"
5"
5"
5"
5"
5"
5”
14FL-3006
5”
14FL-3006AZ
5”
14FL-3006CP
6”
14FL-3006-600
6”
14FL-3006-600CP
6” - 5” 14FL-3006-6050
6” - 5” 14FL-3006-6050CP
5"
5" R
5"
R
5"
5"
5"RRR
DYNAFLEX PART NO.
14FL-8099AZ
14FL-8099CP
14FL-80996050CP
11"
11"
11"
11"
5" R
5"5"R
2 PL5"
5"RRR
222PL
PL
2PL
PL
5” ALUMINIZED MANIFOLD ELBOW
4” REF #04-17093-10
4”
14FL-4022-4AZ
5”
14FL-4022AZ
10
36"
36"
36"
29"
29"
36"
FREIGHTLINER
9" EXHAUST 5" R
OEM
4" I.D.
7" ASSEMBLIES
5" R
9"
36"
29" 36"
4" I.D.
7"
38 1/2"
38 1/2"
5" O.D
5" O.D9 1/2"
9 / 2"
5" O.D
9 1/25"
" O.D
5" R
1
9 / 2"
5"
R
1
9 5”/2"EXHAUST Y-DIVIDER
1
FREIGHTLINER
#04-13974-000
9 / 2"
5" R
5" R
11
5" O.D.
5" O.D.
8"
10" 5"
R I.D.
10" R
5" I.D.
8" 5" I.D.
5" I.D.
5" I.D.
45°
45°8"
8"
45° 8" 8"
45°45°
5” ELBOW
8"
FREIGHTLINER45°
#04-133158"
4"
5"I.D.
5" R
5" R
5" R
4"
5"I.D.
60O
5"I.D.
5"
5" I.D.
12-500AZ
5”
4"
14FL-3315AZ
5”
60O
"
0 / 5"
60O
O
1
60
60O
8"
1 / 2"
10
60O
O
1 2"
60
8" 5" O.D.
60O 1102"/
60O 0 / #04-13973-000
1 2"
FREIGHTLINER
8"
5" O.D. 1
0 1/ /2"
1
SIZE DYNAFLEX PART
NO.
8"
10
8"
5”
14FL-3973AZ
5" O.D.
8"
5" O.D.
10" R
10" R
10"
R
45°
8"
5"I.D.
5"
1 2
8"
4"
4"
5" R
5"I.D.
5"
5"I.D.
60
5” ELBOW 90°
11P-500AZ
5”
14FL-3110AZ
5”
8"
8"
14FL-3974AZ
5”
6” - 5” 14FL-3974-6050AZ
5"
5" O.D.
5" O.D.
9"
9"
38
/ 2"
5" 1R
38 1/2"
5" R
1
5"
5" R
5" R
9" 5" O.D.
5" O.D.
10" R
38 1/2"
38 1/2"
O
90°
9"
4" I.D. 7"
90°9"
4"
I.D.
7"
29"
4" I.D. 7"
4" I.D. 7" 90°
90°
9"
90°
9"
29"
90°
29"
FREIGHTLINER MUFFLER
DYNAFLEX PART NO. 87Q-400-189
5" O.D
5" O.D
9"
9"
5" O.D.
1988
TO PRESENT
SINGLE EXHAUST IN
FRONT
OF SLEEPER
5" O.D.
5" R
R
5" 9"
4"
60O
60O
4"
4"
5" R
5" R
100O
100O
4"
4"
4” LOWER EXHAUST ELBOW
4”
14FL-2126AZ
4"
4"
100O
100O
100O
100O
5.75"
/12"
20O FLARE
3
5"
O.D.
FREIGHTLINER
EXHAUST
5.75"
OEM ASSEMBLIES
I.D
/12"
.
5"
O.D.
3
4.45"
5"
60O
I.D
.
5"
I
5"
.
14FL-1284
5”
14FL-1284AZ
5”
16"
4.45"
5"
O.D.
3425
/4O"
32
5"
I.D.
5"
O.D.
O
32
34 /4"
O
3
5"
O.D.
5"
O.D.
5"
O.D.
25O
32O
32O
16"
34 3/4"
5"
O.D.
FREIGHTLINER #681-492-64-01
32O
14FL-9264AZ
5”
5"
5"
I.D.
O.D.
5"
I.D.
32O
CONVENTIONAL LOWER MANIFOLD
SECTION
32OWITH DUAL EXHAUST
14FL-2098AZ
5”
25O32O
16"
CONVENTIONAL
25O LOWER MANIFOLD
SECTION WITH SINGLE EXHAUST
25O
5”
14FL-2399
25O
5”
14FL-2399AZ
5"
O.D.
5" .
.D
O
40.44"
32O
5"
O.D.
5"
O.D.
16"
25O
5"
I.D.
40.44"
32O
32O
5"
O.D.
25O
32O
40.44"
5" .
.D
O
5"
5"
14FL-3143AZ
5”
34 /4"
3
60O
5"
4.45"
I.D 3"
.
4.45"
3
D.
5"
O
O.D.
20
FLARE
3"
60O
32O
20O FLARE
5.75"
.D
"
D.
5.75"
3"
5"
5"O.D.
3
/12"
60O
3
5"
20O FLARE
/12"
3"
32O
40.44"
5" .
.D
O
5"
O
.
D.
32O
32O
12
5"
O
NEW
1988 TO PRESENT FREIGHTLINER CONVENTIONAL
WITH DUAL EXHAUST
FREIGHTLINER EXHAUST COMPONENTS
DYNAFLEX P.N.’S DISPLAYED
CONNECT TO CATERPILLAR
3406 B ENGINE
14FL-4120AZ
AO4-14120-000
SEE BELOW
11P-500AZ
(14FL-3110AZ)
04-13110-032
25P-50048CP
2PL.
53-500-14”
SST FLEX TUBE
04-13973-000
14FL-3973AZ
87BC-6050CP
2PL.
14FL-3974AZ
12E-500AZ
14FL-3315AZ (2PL.)
53-500-12”
SST FLEX TUBE (2PL.)
04-15077-003
14FL-L5077AZ
5” DIA.
SEE BELOW
7"
7"
7"
8"
5"
I.D.
8"
5"
I.D.
8" FLANGED TUBE
5” MANIFOLD
13
20O FLARE
20O FLARE
5" R
20O FLARE
5" R
5" R
5” 14FL-4120AZ
04-15077-000
14FL-R5077AZ
5” DIA.
SEE BELOW
5"
I.D.
ELBOW USED WITH
STACK BEHIND 40”
SLEEPER CAB 34O
34
5"
5"
O
5"
34O
3.43"
3.43"
3.43"
90O
90O
5” EXHAUST TURN-UP RIGHT & LEFT
RIGHT SIDE FREIGHTLINER
90O#04-15077-000
LEFT SIDE FREIGHTLINER #04-15077-003
DYNAFLEX PART NO.
SIZE
14FL - R5077
5”
6” - 5” 14FL - R5077-6050
6” - 5” 14FLX - R5077-6050
REPLACE “R” IN P. N. WITH “L” FOR
LEFT HAND ELBOW.
9 3/4"
8 3/4"
4"
I.D.
GENERAL MOTORS
9 3/49" 3/4"
8 3/48" 3/4"
13"
13"
8 3/4"
4" 4"
I.D.I.D.
4"
I.D.
R
YP
4"
I.D.
9 3/4"
8 3/4"
4" 4"
I.D.I.D.
4"
I.D.
8 3/4"
4" R
TYP
G M C part no. 2078401
4"
Dynaflex Part
No: 14G M-8401
I.D.
use
v-band: 40-400S4"
13"13"
13"
9 3/4"
4"
I.D.
9 3/4"
Dynaflex4"Part No: 14G M-8402
I.D.v-CLAMP: 40-400S
13"use
13"
13"
13"
3 /2"
O.D.4" R4" R
13"
1
13"
4" R4" R
TYP
TYP
20°
TYP
TYP
4" R
TYP
4" 4"
4"
13"
4"
4" R 4" R
TYP
4" 4" TYP
4" R
TYP
4" R
TYP
4" R
TYP
4"
4"
4" 3 1/23" 1/2"
G M C part no. G488489
O.D.
O.D.
Dynaflex Part No: 14G M-8489R
85°
3 1/2"
1
O.D.
3
/2"
4"
G M C part no. G488488
Dynaflex Part No: 14G M-8488L
O.D.
3 1/2"
I.D.
3 1/2"
O.D.
20°20°
3 1/2"
O.D.
20° 20° 20°
85°85°
85°
85°
3 1/23" 1/2"
I.D.I.D.
/2"1
3 1/2" 3 3
/2"
I.D.
I.D.
I.D.
20°
3 1/23" 1/2"
O.D.
O.D.
3 1/2"
1
3 /2" O.D.
3 1/2"
O.D. O.D.
1
85°
Dynaflex Part No: 14G M-4551
3 1/2"
I.D.
14
20°20°
8
general motors (cont.) 5"
5"
2 1/2"1
2 /2"
5"
2 1/ 2 "
20
20
FLARE
FLARE
20
FLARE
2 1/ 2 "
O
20
FLARE
O
O
O
RE
3" I.D.
O
g m c part no. 2046594
O
O
O
O
5" O.D.
3" I.D.
3" I.D.
20 BEND
20 BEND
20 BEND
20 BEND
O
O
O
20
5" O.D.
FLARE 5" O.D.
3" I.D.
20
FLARE
20
20
FLARE
FLARE
use v-band: 41-338S
Upper Exhaust
use v-band: 41-450S
4"
O.D.
4"
4"
O.D.
O.D.
4"
12"O.D.
12"
9 /2"
1
4"
4"
O.D.
45
4"
45
O
12"
4"
9 1/2"
4"
45
45
9 1/2"1
9 /2"
O
O
O
g m c part no. 20644099
4" O.D.
4" O.D.
4" O.D.
Dynaflex Part No: 25P-40012
100
ford
100
5” Aluminized exhaust to be used
O
O
100
100
O
5" R
4 PL
120
COMPRESSED
OMPRESSED
SURFACESURFACE
120
O
with cummins N T C engine
O
5" R
5" R
4 PL
4 PL
COMPRESSED
5" R
120
SURFACE
120 PART NO. F2HZ5A212B
COMPRESSED
4 PL
FORD
COMPRESSED
SURFACE
OLD FORD PART NO. EOHZGA212B
SURFACE
Dynaflex Part No: 14FD-5A212AZ
90
90
90
90
90
O
O
O
O
O
O
O
90
90
90
O
15
O
5"
O
90
O
O
5"
5"
5"
5"
21"
INLET
OUTLET
16"
O.A.L.
10"
ford (cont.)
90
O
3.25” O.D. x 45° Flare with
3 Hole Flange
2.7
5"
I.D
.
26"
14.62"
ford part no. E6H Z 5246 F
Dynaflex Part No: 14f D-L5246
21"
l, lN, lN T, lT, lT S 8000 Series
With Caterpillar 3208N Engines.
5H Z5246AB REPLACED BY E6H Z5246F
4"
.D
.
O
INLET PIPE LH (LEFT)
3.25” O.D. x 45° Flare with
3 Hole Flange
"
75 .
.
2 .D
O
OUTLET
16"
10"
90
ford part no. D5H Z5246 aC
O
Dynaflex Part No: 14f D-R5246
INLET PIPE RH (RIGHT)
l, lN, lN T, lT, lT S 8000 Series With
Caterpillar 3208N Engines.
ford mufflers
26"
"
75 .
.
2 .D
O
BODY
INLET
OUTLET
4"
.D
.
O
O.A.L.
Part NO.
87Q-300-135
87Q-350-146
87Q-400-594
Inlet &
OUTLET
3” 3.5” 4” Body SIZEoal
DIA. X L.
7” x 14” 19.75”
7” x 19” 25.5”
9” x 20” 16"26”
10"
90
O
16
45
45
O
INTERNATIONAL HARVESTER-NAVISTAR
5"
10 R
68°
90°
IH part no. 43203173-C1
Dynaflex Part No: 14I H-3845AZ
50 1/2"
5"
90
90
O
11 1/2"
3 1/ 2 "
5" R
O
42
O
3 1/2" R
13 1/2"
20 FLANGE
O
90°
O
20° FLARE
FLANGE
NAVISTAR part no. 582167-C1
Dynaflex Part No: 14I H-2167AZ
45°
INTERNATIONAL HARVESTER-NAVISTAR MUFFLERS
5"
20° FLARE
51" OAL
FLANGE
2 1/2"
4"
9"
5"
45
O
5" R
INLET
INTERNALLY BAFFLED
USE FOR DUAL EXHAUST
I H part no. 582122-C1
Dynaflex Part No: 87Q-4050-514
17
5"
OUTLET
KENWORTH
5"
5"
5"
14KW-L0724
LEFT
5" I.D.
5"
K W = K 180-B10742L
14KW-R0724
RIGHT
SIZE
5”
6”
6” - 5”
5" I.D.
DYNAFLEX
PART NO. -- LEFT 14K W L0742
14K W L0742-600
14K W L07426050
DYNAFLEX
PART NO. -- RIGHT
14K W R0742
14K W R0742-600
14K W R07426050
ALTERNATE MATERIAL:
ADD C P FOR CHROME PLATE EXAMPLE:
14 K W R0742C P
K W = K 180-B10742L K W = K 180-B10742R
“A” MODEL --- 1982 TO PRESENT
MODEL W900A
5"
5"
5"
14KW-L4764
LEFT
5"
14KW-R4764
RIGHT
K W = K 180-14764L
K W = K 180-14764L K W = K 180-14764R
“B” MODEL 1986 TO PRESENT
OVERFRAME EXHAUST
MODEL T-600 & T-800
MODEL W900B
SIZE
5”
6”
6” - 5”
DYNAFLEX
PART NO. -- LEFT 14K W L 4764
14K W L4764-600
14K W L 47646050
ALTERNATE MATERIAL:
ADD C P FOR CHROME PLATE 5"
DYNAFLEX
PART NO. -- RIGHT
14K W R4764
14K W R4764-600
14K W R47646050
EXAMPLE:
14K W R4764C P
5"
14KW-L2953
LEFT
14KW-R2953
RIGHT
5" I.D.
K W = K 180-12953L
SIZE
5”
6”
6” - 5”
DYNAFLEX
DYNAFLEX
PART NO. -- LEFT PART NO. -- RIGHT
14K W L2953
14K W R2953
14K W L29 53-600
14K W R2953-600
14K W L29536050
14K W R29536050
ALTERNATE MATERIAL:
ADD C P FOR CHROME PLATE K W = K 180-12953L K W = K 180-12953R
“A” MODEL --- 1976 to 1982
60” SLEEPER UNDERFRAME EXHAUST
3” LONGER THAN -0742
EXAMPLE:
14 K W R2953C P
18
NEW
KENWORTH
1995-1996-1997 AEROCAB™ W900L MODEL
6"6"
O.D.
O.D.
6"
O.D.
KW=K180-18615
Dynaflex P.N. 14KW-R8615 is
a shorter elbow, used where
standard 40” aluminum steps
are used.
1
1
6"
O.D.
1
Stack features internal clamping
device to permit rotation of stack
top to suit various installation
requirements.
Use PN 14KW-4764 for the
“B” model standard cab, 11"cab.
studio cab
and air-ride
11"
11"
KW=k180-18616
Dynaflex P.N. 14KW-R8616 is
a longer sweeping elbow to fit
where the 45” extended
aluminum steps are used.
Chrome Plated Mounting
Bracket Clamp with welded
nut for 5”, 6”
and 8” stacks
11"
Illustration Shows 6” DIA. ELBOW
with TAPER LOCK EXTENSION
ON TOP AND REDUCED
TO5"
5”
5"
O.D.
ON THE BOTTOM.
O.D.
5"
O.D.
KW=K180-18615
DYNAFLEX P.N. 14KW-R8515
DIAMETER
5” O.D. ENDS
6” reduced to 5”
6” reduced to 5”
w/ TAPER LOCK extension
PART NO.
14KW-R8615
14KW-R8615-6050
14KW-RX8615-6050
5"
O.D.
KW = K180-18616
DYNAFLEX P.N. 14KW-R8616
W900 MODEL L
AIR RIDE CAB
19
SIZE
5” - 6”
5” - 8”
6"
T-803
AEROCAB
O.D.
1994 TO PRESENT
TAPER LOCK
EXTENSION
TAPER LOCK
EXTENSION
REDUCED AT
TANGENT
REDUCED AT
TANGENT
6" DIA.
PATENT APPLIED
6" R
6" R
6" DIA.
REPLACE “R” IN PART NO.
WITH “L” FOR LEFT-HAND CLAMP
6"
O.D.
TAPER LOCK
EXTENSION
TAPER LOCK
EXTENSION
5" DIA. TO PROVIDE
SPACING FOR AIR-RIDE
5" DIA. TO PROVIDE
CAB STUDIO SLEEPER
SPACING FOR AIR-RIDE
CAB
STUDIO SLEEPER
DYNAFLEX
PART NO.
18"
SIZE
18"
KW = K180 - 17876
DYNAFLEX PART NO.
6" R
14KW-78766050CP
6” - 5”
6" R
WELD
58
O
WELD
58
O
14KWSL 47646050XCP
14KWSL 47648050XCP
CHANGE “L” TO “R” FOR RIGHT SIDE ELBOW
“X” IN P.N. INCLUDES TAPER LOCK EXTENSION
PART NO.
50bj-kwwr500cp
50bj-kwwr600cp
50bj-kwwr700cp
50bj-kwwr800cp
PART NO.
14KW-R8616
14KW-R8616-6050
14KW-RX8616-6050
REPLACE “R” IN PART NO. WITH “L” FOR LEFT-HAND ELBOW.
ALTERNATE MATERIAL:
EXAMPLE:
14KW-R8615CP
*ADD SP FOR POLISHED STAINLESS
14KW-R8615SP
*SPECIAL ORDER ONLY
TOP MOUNTING
BRACKET CLAMP
16 3/4"
16 /4"
3
5"
5"
I.D
.
I.D
.
KENWORTH
EXHAUST COMPONENTS
42 3/4"
42 3/4"
19 1/2"
7 1/2" R
15 1/4"
SIZE
5”
6”
6” - 5”
DYNAFLEX P.N.
14KW-4766AZ
14KW-4766600AZ
14KW-47666050AZ
Standard material is aluminized.
15 1/4"
INLET
5" O.D.
4 1 / 2"
4 1/2"
29 1/2"
29 1/2"
MANIFOLD TO MID-PIPE
KENWORTH P.N. K180-14122
SIZE
DYNAFLEX P.N.
5”
14KW-4122AZ
5"O.D.
5"O.D.
5"
/12"
7 1/2" R5"
.
.D
O
5"
8
R
5” EXHAUST Y- DIVIDER
1/4 NPT
5” MANIFOLD FLANGED
TUBE WITH 1/4” BOSS
SIZE
5”
DYNAFLEX P.N.
14KW-0166AZ
5 3/4"
15 1/2"
5" R
KENWORTH p.N: K180-5419
Dynaflex P.N.: 14KW-5419
20
NEW
KENWORTH
EXHAUST COMPONENTS
1986 TO PRESENT
KENWORTH “B” MODEL STANDARD CAB
Model T-800 - Kenworth
DYNAFLEX P.N.
14KW-0166 AZ
DYNAFLEX
FLEX. TUBE
Style 51 or 53-500
(Cut to Length)
DYNAFLEX
MTG. CLAMP
45KW-512CP
DYNAFLEX
CURVED
STACK
25P-50048CP
DYNAFLEX P.N.
14KW-4122 AZ
DYNAFLEX P.N.
FLEX. TUBE
Style 51 or 53-500
(Cut to Length)
DYNAFLEX
MUFFLER STACK
87BC-500CP
DYNAFLEX P.N.
14KW-4766 AZ
CLAMP
50TS-500SP
DYNAFLEX P.N.
14KW-L4764
21
CLAMP
50TS-500SP
DYNAFLEX P.N.
14KW-R4764
/2"
18"
18"
5"
5"
18"
KENWORTH (CONT.)
5"
11"
5"
11"
18"
7 1/ 2 " R
1
7 1/27" R
/2" R
14KW-9054
K180-9054A
7 1/ 2 " R
5"
20 1/2"
1
7 /2" R
11"
11"
7 1 /2 " R
14KW-9052
K180-9052
7 1 /2 " R
5"
20 15"
/2 "
5" R
7 1 / 2" R
5" R
5"
20 1/2"
5"
20 1/2"
5" R
5" R
45KW-500CP
45KW-600CP
45KW-700CP
45KW-800CP
46KW-500CP
46KW-600CP
46KW-700CP
46KW-800CP
FLAT BOLT
MACK
47KW-500CP
47KW-600CP
ROUND BOLT
mack part no. 2M E-336B
2M E-336
Dynaflex Part No: 87Q-400-127
40"
34.4"
4" I.D.
4" I.D.
8 1 /2 "
22
Mack (CONT.)
12"
4"
5" R
59
8"
O
5"
4"
I.D.
6" R
9"13"
12"
5" R
8"
12"
5" 5" R
mack part no. 8"
4M E-21408
mack part no. 4M E-29333
4" No: 14MK-1408
Dynaflex Part
I.D. 8"
Dynaflex Part No: 13"
14MK-9333
12"
5" R
5"
4"
I.D.
4"
I.D.
12"
5" R
13"
5"
13"
12"
12"
13"
5" R
5" R
12"
4" R
5"
5" R
13"
5" R
4"
1mack part no. 4M E-21385
2 /2"
14M K-1385 4" R
5”
12"
14M K-1385-400
4”
4" R
2 /2"
5" R
4" R
1
2 /2"
2 /2" 13"
1
13" SIZE
13"
4"
12"
4"
23
DYNAFLEX PART NO.
14M K-1485
4"
14M K-1485-400
8"
Dynaflex Part No: 14M K-1696A Z
4" R
4" R
4" R
4"
4" R
12"
12"
4"
5”
4”
4"
12"
1
12"
4" 13"
R
8"
4" 8"
4"
mack part no.
8" 4M E-21919
Dynaflex Part No: 14M K-1919A Z
Mack (CONT.)
R Model
SQUARE Fuel Tanks
4"
R Model
Round Fuel Tanks
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
Dynaflex: 14M K-2611A Z
Dynaflex: 14M K-2612A Z
8"
8"
1"
Mack FLEX JOINT
8"
4"
8"
4"
1"
4"
8"
4"
4"
1"
8"
4"
4"
D.
4.
O.
D.
75
4.
O.
D
4. . 4.
O.
O. 75
D.
D.
75
4.
O.
D.
O
Dynaflex part no. : 14M K-1409
D.
4 I.
D.
4 I.
15
D. D M 600 SERIES
4 I. 75
15
.
15
D
D.
.
4I
4 I.
O
O
75
75
15
O
O
15
O
15
O
D.
4 I.
O
15
O
Dynaflex part no. : 14M K-1598A Z
O
O
O
O
O
O
4 / 4"
70
40
O.D.
FLARE
70
7040
3
4 /4"FLAREFLARE
O.D.3
4 /4" 4 3/4"70
FLARE
O.D. O.D.
4 3/4"
O.D.mack part no. 4M E-21552A
3
O
O
O
O
O
O
O
O
O
O
80
4070
80 4
15 40
FLARE
803
15
15
4 /4"
4 O.
D.
O.D.
80
80
40
15
4 O. 4 O.
D.
D.
80
40
4 O.
D.
70
FLARE
O
O
1"
4"
O
O
1"
Dynaflex part no. : 14M K-1696
O.
1"
8"
6" 1"
4" 8"
6"
8"
1"
6"
4"
4.
8"
6"
8"
1" 6"
1"
4"
4"
8"
6"
1"
O
O
O
O
O
O
24
D
75
4"
90
O
O
4" O.D.
.
.D
4"
4"
D.
O.
4"
O
O
D.
15 10
10
O
O.
4"
O
12
O
48
O
.
I.D
88
O
O
D.
45
45
O
10
O
45
69
O
O
O
20
20
D M SERIES
O
30
O
90
O
.
D.
.D .
O .D O.
O 4"
4"
4" O.D.
4" O.D.
90
90
O.
D
O.
D
35
60
75 35
60 20
75
4"
O.
35
60
D
75
4"
O
4" I.D.
.
MODEL #379
CONV.
4"
4"
12
12
5" R4816"
6" R
4"
15"
48
12 #14-01726
PETERBILT
5" R 16"
SIZE
PART NO.
88
48
4”
14P B-1726-400
88 58°
5"
69
68
5”
14P B-1726
5"
6”
14P B-1726-600
69
88
6” - 5” 58°
14P B-1726-6050
5"
PETERBILT #14-03056
7” - 5” 14P B-1726-7050
69
8” - 5”
14P B-1726-8050
O
O
O
O
O
6" R
O
O
peterbilt
6"
6"
O
O
O
CONV.
O
O
O
4" O.D.
MODEL #359
O
O
4" I.D.
4" I.D.
4"
O
O.D 4."DO. .
D
.
O
O
4"
O
4"
30
30
O
4"
4"
15
15
O.
.
I.D
"
4 .
I.D
"
4
4"
O
.D.
Mack (Cont.)
O
15"
O
O
O
O
O
O
68
O
5"
O
EXTENS. 14P B X-1726-6050
6” to 5”
SHOWN
25
ADD C P FOR CHROME PLATE
ADD “X” FOR TAPER LOCK
EXTENSION
EXAMPLE:
14P B-1726C P
14P B X-1726-6050
SIZE
PART NO.
14PB-3056
5”
6”
14P B-3056-600
6”
- 5” 14P B-3056-6050
8” - 5”
14P B-3056-8050
EXTENS.
14P
BX-3056-6050
ALTERNATE MATERIAL:
EXAMPLE:
14P B-3056C P
PETERBILT (CONT.)
5"
MODEL #377 & #378
CONV. CAB - RIGHT or LEFT
5" R
5"
SHORTER FUEL TANK
5"
5"
2 PL
13 /2"
5" R
2 PL
"L"
10" R
1
MODEL #377 & #378
CONV. CAB - RIGHT or LEFT
LONGER FUEL TANK
"L"
10" R
13 /2"
1
PETERBILT PART NO. 14-03315
SIZE
PART NO.
5”
14PB-L3315
6”
14P B-L3315-600
6” - 5” 14P B-L3315-6050
REPLACE “L” IN PART NO. WITH “R”
FOR RIGHT HAND ELBOW.
REPLACE “L” IN PART NO. WITH
“R” FOR RIGHT HAND ELBOW.
ALTERNATE MATERIAL:
P
PETERBILT PART NO. 1411380
SIZE
PART NO.
L
5”
19”
14PB-L1380
6”
14PB-L1380-600
22”
6” - 5” 14P B-L1380-6050
22”
EXAMPLE:
14P B-L3315C
ALTERNATE MATERIAL:
EXAMPLE:
14P B-L1380C P
8 11/16"
5 15/16"
121/2"
5"
O.D.
121/2"
8 11/16"
15
5" 5I.D.
/16"
5" O.D
5" I.D. peterbilt part no. 14-02486
Dynaflex part no. 14P B-2486
5"
O.D.
14"
14"
5" I.D.
5 15/16"
8 11/16"
5" O.D.
peterbilt part no. 14-02851
peterbilt part no. 14-03658
.
26
14"
peterbilt (Cont.)
B
C
5" O.D.
(2 PL.)
B
45
O
C
D
A
5" O.D.
(2 PL.)
5" I.D.
45
O
5" R
A
‑‑‑
size
DYNAFLEX
PART No.
PETERBILT MODELsize
∝
PART No.
NO.
I.D./O.D.
R
A
B
C
Dangle
14P B-4055
14P B-3055
14P B-2308
14PB-2308
14-104055
14-103055
14-102308
14-13944
5”
5”
5”
5”
OTHER SIZES
6”
6”
6” - 5”
14P B-4055-600
14P B-3055-600
14P B-4055-6050
359
379
377
377
5”
5”
5”
5”
5”
5”
12”
131/2”
181/2”
13”
16”
14”
111/2”
171/2”
13”
EXAMPLES:
14P B-4055C P
14P B-4055S
* SPECIAL ORDER ONLY
45P B-500C P
45P B-600C P
45PB-700CP
45PB-800CP
5" I.D.
45PB-A500CP
45PB-A600CP
45PB-A700CP
45PB-A800CP
NEW “ANGLE”
BRACKET
27
5" R 45°
25”
18.7”
27”
note: series 46 & 47 series clamps are not available.
please use 45 series clamps.
40°
55°
PETERBILT UNIBUILT CAB REPLACEMENT BRACKET
TO FIT 6”, 7”, AND 8” STACKS
CAB BRACKET
14PB-2998CP
NEW ANGLE CAB BRACKET
14PB-A2998CP
PETERBILT
#14-12998
PETERBILT
#14-12998
1995-1999 PETERBILT
UNIBUILT CAB REPLACEMENT
BRACKET TO FIT 6”, 7” AND 8” STACKS
3/16” RUBBER PAD INCLUDED
PART NO.
14PB-2998CP
1995-1999 PETERBILT
UNIBUILT CAB REPLACEMENT
BRACKET TO FIT 6”, 7” AND 8” STACKS
3/16” RUBBER PAD INCLUDED
“REMOVE” PN14-14792
FROM CAB. USE BOLTS AND
GROMMETS ON NEW BRACKET.
DESCRIPTION
Chrome Plated
Rubber Pad
PART NO.
DESCRIPTION
14PB-A2998CP Chrome Plated
Rubber Pad
These new CAB MOUNT BRACKETS replace the “Horse-Shoe” bracke used on 1995 through 1999 Peterbilt Trucks.
new!
g
mountin ht bus
bracke
ings
PETERBILT BUSHINGS
NEW
FOR CAB BRACKET TO STACK MOUNTING BRACKET CLAMPS
POLYURETHANE
FEATARUES:
• Polyurethane versus Rubber (O.E.)
• Six times longer service life
• Steel Reinforced Liner
• Available in skin packages of 8
pieces,
which include 4 male & 4 female
bushings
STEEL
REINFORCED
POLYURETHANE
DYNAFLEX BUSHING P.N.
14PB-B4656
POLYURETHANE
ASSEMBLED
O.E. PETERBILT P.N.
14-14656
RUBBER
28
NEW
WESTERN STAR
85° I.D. LONG ELBOW REPLACEMENT
FOR WESTERN STAR TRUCKS
REPLACES O.E.M. PART. NO. 23527-3440
(EXPANDED END NOT SLOTTED)
MONSTER STACK ELBOW
6"
6"
6"
8"
7 1/2" R 8"
7 /2" R
1
5"
I.D.
WESTERN STAR 85° ELBOW
6” TO 5” WITH taper lock
EXTENSION
5"
I.D.
85
O
Dynaflex Part No:
14W S X L -3440-6050C P
85
O
4 1/2"
WESTERN STAR
part no. 23527-3440
SIZE PART NO.
5”
14W S-3440
6”14W S-3440-600
6” - 5” 14W S-3440-6050
18 1/2"
18 1/2"
9R
9R
4 1/2"
6"
TAPER LOCK
TAPER LOCK
EXTENSION
EXTENSION
5"
I.D.
5"
I.D.
85
O
85
O
12 1/2"
12 1/2"
WESTERN STAR TRUCK
CLAMPS TO MOUNT 5”, 6” AND 8” STACKS TO THE CAB
5"
L
6"
L
INSTALLATION INSTRUCTIONS:
29
8"
L
HERITAGE CAB 1988-1999
TUBE DIA.
CLAMP P.N.
L
3/8”
5”
45WS-H500CP
3
6”
45WS-H600CP 33/8”
8”
45WS-H800CP
33/8”
CONSTELLATION CAB 1998-2000
TUBE DIA.
CLAMP P.N.
L
5”
45WS-C500CP 21/2”
6”
45WS-C600CP 21/2”
8”
45WS-C800CP 21/2”
1. Remove existing bracket clamps, part numbers 23609-3414 and 23609-3415, right and left hand parts.
2. Retain the bolts and rubber grommets.
3. Use the Dynaflex mounting bracket clamp part number 45WS-DIA (around the stack) and re-install on to the
cab mount bracket using the original bolts and grommets, to complete the mounting installation. School Bus & RV Exhaust components tail pipe
spout
L
SIZE
L
2”
12”
2 1/4”
12”
21/2”
12”
2 3/4”
12”
3”
12”
31/2”
14”
4”
14”
STYLE 16P
PART NO.
25P-20012
25P-22512
25P-25012
25P-27512
25P-30012
25P-35014
25P-40014
L
STYLE 16
PART NO.
25-20012
25-22512
25-25012
25-27512
25-30012
25-35014
25-40014
L
L
EXAMPLE:
25L-30012CP
25L-30012S
ADJUSTABLE ELBOW
0O TO 45O
ADJUSTMENT
3"
0O TO 45O
ADJUSTMENT
• Makes any angle from 0 to 45 degrees
36"
• simplifies repowering or turbocharging
12"
36"
• Eliminated mitre and custom elbows
• REDUCES DOWNTIME
12" AND LABOR COSTS
•
clamp
provides
a quick disconnect
I.D.
• assures perfect alignment
OO O
O
O
O
45
TO
0O 0TO
045
450OO45
TO
TO 45O
0TO
I.D.
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
Illustration show how adjustable elbows
simplify exhaust piping when turbocharging
an inline conventional
3" 3" 3" 3" 3"tractor.
3"
L
easy to install . . .
L
1. rotate the flange halves & align to the
O.D.desired angle before clamping or welding.
2. Then tighten v-clamp and joint locks rigidly, making a leak proof seal.
O.D.
12"
12"
five styles
available
SIZE
3”
31/2”
4”
5”
24"
24"
-1
-2
-3
both ends
SLOTTED 19-300-1AZ
19-350-1AZ
19-400-1AZ
19-500-1AZ
SLOTTED &
O.D. END
19-300-2AZ
19-350-2AZ
19-400-2AZ
19-500-2AZ
both ends
O.D.
19-300-3AZ
19-350-3AZ
19-400-3AZ
19-500-3AZ
-4
FLANGED &
SLOTTED END 19-300-4AZ
19-350-4AZ
19-400-4AZ
19-500-4AZ
ADJUST ELBOWS ARE ALUMINIZED AND INDIVIDUALLY PACKAGED.
AVAILABLE IN CHROME PLATE: CP
EXAMPLE: 19-400-1CP
-5
FLANGED &
O.D. END
19-300-5AZ
19-350-5AZ
19-400-5AZ
19-500-5AZ
30
STRAIGHT STEEL EXHAUST TUBING
STANDARD MATERIAL: CARBON STEEL
5 FT. or
10 FT.
SIZE
1”
11/4”
11/2”
15/8”
13/4”
2”
2 1/4”
21/2”
2 3/4”
3”
31/2”
4”
41/2”
5”
51/2”
6”
7”
8”
10”
12”
PART NO.
22-100
22-125
22-150
22-162
22-175
22-200
22-225
22-250
22-275
22-300
22-350
22-400
22-450
5 FT. or
22-500
10 FT.
22-550
22-600
22-700
22-800
22-1000
22-1200
GAUGE
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
.130 tk.
.110 tk.
ADD AZ FOR ALUMINIZED (2” - 6”)
EXAMPLE:
22-400S
22-400AZ
BENDABLE STEEL EXHAUST TUBING
STAINLESS STEEL .020 THICK
A heavy duty hose designed to withstand the temperature, and
motions of diesel engine installations. Its continuous metal wall make
it absolutely leak-tight.
5 FT.
5 FT.
31
SIZE
PART NO.
11/4”
23-125S
11/2”
23-150S
2”
23-200S
21/2”
23-250S
3”
23-300S
31/2”
23-350S
4”
23-400S
5”
23-500S
6”
23-600S
CENTERLINE RADIUS FOR
PERMANENT
INTERMITTENT BENDS
BENDS
STAINLESS
21/2”
16”
3”
20”
31/2”
24”
41/2”
28”
5”
34”
51/2”
39”
6”
44”
71/2”
52”
81/2”
64”
STRAIGHT STACK EXTENSIONS
SIZE PART NO. L
21/2” 24-25012 12”
24-25018 18”
24-25036 36”
24-25048 48”
24-25060 60”
24-25072 72”
24-25084 84”
3”
24-30012 12”
24-30018 18”
24-30024 24”
24-30036 36”
24-30048 48”
L 24-30060 60”
24-30072 72”
24-30084 84”
31/2” 24-35012 12”
24-35018 18”
24-35024 24”
24-35036 36”
24-35048 48”
24-35060 60”
24-35072 72”
24-35084 84”
24-40012 12”
4”
24-40018 18”
24-40024 24”
24-40036 36”
24-40048 48”
24-40060 60”
24-40072 72”
24-40084 84”
L
PART NO.
24P-25012
24P-25018
24P-25036
24P-25048
24P-25060
24P-25072
24P-25084
24P-30012
24P-30018
24P-30024
24P-30036
24P-30048
24P-30060
24P-30072
24P-30084
24P-35012
24P-35018
24P-35024
24P-35036
24P-35048
24P-35060
24P-35072
24P-35084
24P-40012
24P-40018
24P-40024
24P-40036
24P-40048
24P-40060
24P-40072
24P-40084
ALTERNATE MATERIAL:
ADD AZ FOR ALUMINIZED
style 24
Expanded &
slotted end
SIZE
PART NO. L
24-50012 12”
5”
24-50018 18”
24-50024 24”
24-50036 36”
24-50048 48”
24-50060 60”
24-50072 72”
24-50084 84”
24-60012 12”
6”
24-60018 18”
24-60024 24”
24-60036 36”
24-60048 48”
24-60060 60”
24-60072 72”
24-60084 84”
24-70036 36”
7”
24-70048 48”
24-70060 60”
24-70072 72”
24-70084 84”
24-80036 36”
8”
24-80048 48”
24-80060 60”
24-80072 72”
24-80084 84”
PART NO.
24P-50012
24P-50018
24P-50024
24P-50036
24P-50048
24P-50060
24P-50072
24P-50084
24P-60012
24P-60018
24P-60024
24P-60036
24P-60048
24P-60060
24P-60072
24P-60084
24P-70036
24P-70048
24P-70060
24P-70072
24P-70084
24P-80036
24P-80048
24P-80060
24P-80072
24P-80084
EXAMPLES:
24-30036CP
24-30036AZ
24-30036S
style 24P
plain ends
32
STRAIGHT STACK EXTENSIONS
Mitred Top
ALUMINUM KILLED STEEL
SIZE PART NO.
21/2” 24M-25012
24M-25018
24M-25036
24M-25048
24M-25060
24M-25072
24M-25084
3” 24M-30012
24M-30018
24M-30024
24M-30036
24M-30048
24M-30060
24M-30072
24M-30084
31/2” 24M-35012
24M-35018
24M-35024
24M-35036
24M-35048
24M-35060
24M-35072
24M-35084
4” 24M-40012
24M-40018
24M-40024
24M-40036
24M-40048
24M-40060
24M-40072
24M-40084
L
PART NO.
12”
18”
36”
48”
60”
72”
84”
12”
18”
24”
36”
48”
60”
72”
84”
12”
18”
24”
36”
48”
60”
72”
84”
12”
18”
24”
36”
48”
60”
72”
84”
24MP-25012
24MP-25018
24MP-25036
24MP-25048
24MP-25060
24MP-25072
24MP-25084
24MP-30012
24MP-30018
24MP-30024
24MP-30036
24MP-30048
24MP-30060
24MP-30072
24MP-30084
24MP-35012
24MP-35018
24MP-35024
24MP-35036
24MP-35048
24MP-35060
24MP-35072
24MP-35084
24MP-40012
24MP-40018
24MP-40024
24MP-40036
24MP-40048
24MP-40060
24MP-40072
24MP-40084
ALTERNATE MATERIAL:
style 24M
Expanded &
slotted end
33
SIZE
PART NO.
24M-50012
5”
24M-50018
24M-50024
24M-50036
24M-50048
24M-50060
24M-50072
24M-50084
24M-60012
6”
24M-60018
24M-60024
24M-60036
24M-60048
24M-60060
24M-60072
24M-60084
24M-70036
7”
24M-70048
24M-70060
24M-70072
24M-70084
24M-80036
8”
24M-80048
24M-80060
24M-80072
24M-80084
L
PART NO.
12”
18”
24”
36”
48”
60”
72”
84”
12”
18”
24”
36”
48”
60”
72”
84”
36”
48”
60”
72”
84”
36”
48”
60”
72”
84”
24MP-50012
24MP-50018
24MP-50024
24MP-50036
24MP-50048
24MP-50060
24MP-50072
24MP-50084
24MP-60012
24MP-60018
24MP-60024
24MP-60036
L
24MP-60048
24MP-60060
24MP-60072
24MP-60084
24MP-70036
24MP-70048
24MP-70060
24MP-70072
24MP-70084
24MP-80036
24MP-80048
24MP-80060
24MP-80072
24MP-80084
L
EXAMPLES:
24M-40036CP
24M-40036AZ
24M-40036S
style 24MP
plain ends
6” TO 5” Reducing STACK EXTENSIONS
STANDARD MATERIAL COLD ROLLED • ALUMINUM KILLED STEEL
CURVED
STACK
STYLE 25
L
L
L
style 24
SIZE Part NO.
24-605048
6” to 5”
24-605060
24-605072
24-605084
24-705048
7” to 5”
24-705060
24-705072
24-705084
24-805048
8” to 5”
24-805060
24-805072
24-805084
style 24M
SIZE Part NO.
24M-605048
6” to 5”
24M-605060
24M-605072
24M-605084
24M-705048
7” to 5”
24M-705060
24M-705072
24M-705084
24M-805048
8” to 5”
24M-805060
24M-805072
24M-805084
style 25
SIZE Part NO.
25-605048
6” to 5”
25-605060
25-605072
25-605084
25-705048
7” to 5”
25-705060
25-705072
25-705084
25-805048
8” to 5”
25-805060
25-805072
25-805084
MITRED TOP
STACK
STYLE 24M
STRAIGHT
STACK
STYLE 24
L PART NO.
48”
24P-605048
60”
24P-605060
L
72”
24P-605072
84”
24P-605084
48”
24P-705048
60”
24P-705060
72”
24P-705072
84”
24P-705084
48”
24P-805048
60”
24P-805060
72”
24P-805072
84”
24P-805084
L
L PART NO.
48”
24MP-605048
60”
24MP-605060
72”
24MP-605072
84”
24MP-605084
48”
24MP-705048
60”
24MP-705060
72”
24MP-705072
84”
24MP-705084
48”
24MP-805048
60”
24MP-805060
72”
24MP-805072
84”
24MP-805084
L PART NO.
48”
25P-605048
60”
25P-605060
72”
25P-605072
84”
25P-605084
48”
25P-705048
60”
25P-705060
72”
25P-705072
84”
25P-705084
48”
25P-805048
60”
25P-805060
72”
25P-805072
84”
25P-805084
ALTERNATE MATERIAL:
*ADD S FOR STAINLESS STEEL
EXAMPLES:
25-605048CP
25-605048S
34
L
5"
CAR HAULER STACK
I.D. END OFFSET
5"
33"
5"
5"
33"
L
33"
"
SIZE
4”
5”
6”
PART NO.
25P-CH40072
25P-CH50072
25P-CH60072
L
72”
72”
72”
L
SPECIAL ORDER ONLY
23"
31"
L
L
23"
31"
DUMP TRUCK STACK
23"
23"
90O EXTENDED
END
31"
31"
SIZE
4”
5”
6”
PART NO.
25PXL-40060
25PXL-50060
25PXL-60060
L
60”
60”
60”
L
8"
L
SPECIAL ORDER ONLY
8"
28"
8"
L
28"
L
28"
28"
9"10"
9"
10"
35
9"
10"
10"
DUMP TRUCK STACK
OFFSET
SLASH-CUT
CURVED STACK
STYLE 26
L9"
L
8"
L
L
SIZE
4”
5”
6”
PART NO.
24MP-DT40051
24MP-DT50060
24MP-DT60060
PART NO.
26P-DT40051
26P-DT50060
26P-DT60060
SPECIAL ORDER ONLY
L
51”
60”
60”
Curved STACK EXTENSIONS
style 25P
plain ends
style 25
Expanded &
slotted end
SIZE PART NO. L
PART NO.
21/2” 25-25012 12” 25P-25012
25-25018 18” 25P-25018
25-25024 24” 25P-25024
25-25036 36” 25P-25036
25-25048 48” 25P-25048
25-25060 60” 25P-25060
25-25072 72” 25P-25072
25-25084 84” 25P-25084
3”
25-30012 12” 25P-30012
25-30018 18” 25P-30018
25-30024 24” 25P-30024
25-30036 36” 25P-30036
25-30048 48” 25P-30048
25-30060 60” 25P-30060
25-30072 72” 25P-30072
25-30084 84” 25P-30084
31/2” 25-35012 12” 25P-35012
25-35018 18” 25P-35018
25-35024 24” 25P-35024
25-35036 36” 25P-35036
25-35048 48” 25P-35048
25-35060 60” 25P-35060
25-35072 72” 25P-35072
25-35084 84” 25P-35084
25-40012 12” 25P-40012
4”
25-40018 18” 25P-40018
25-40024 24” 25P-40024
25-40036 36” 25P-40036
25-40048 48” 25P-40048
25-40060 60” 25P-40060
25-40072 72” 25P-40072
25-40084 84” 25P-40084
SIZE PART NO.
5”
25-50012
25-50018
25-50025
25-50036
25-50048
25-50060
25-50072
25-50084
25-60012
6”
25-60018
25-60024
25-60036
25-60048
25-60060
25-60072
25-60084
25-70036
7”
25-70048
25-70060
25-70072
25-70084
25-80036
8”
25-80048
25-80060
25-80072
25-80084
L
PART NO.
12”
18”
24”
36”
48”
60”
72”
84”
12”
18”
24”
36”
48”
60”
72”
84”
36”
48”
60”
72”
84”
36”
48”
60”
72”
84”
25P-50012
25P-50018
25P-50024
25P-50036
25P-50048
25P-50060
25P-50072
25P-50084
25P-60012
25P-60018
25P-60024
25P-60036
25P-60048
25P-60060
25P-60072
25P-60084
25P-70036
25P-70048
25P-70060
25P-70072
25P-70084
25P-80036
25P-80048
25P-80060
25P-80072
25P-80084
L
L
EXAMPLES:
25-50072CP
25-50072AZ
25-50072S
36
LONG 90°
SPECIAL CURVED STACK
EXTENSIONS
ALUMINUM KILLED STEEL
24"
24"
24"
24"
style 25PL
plain end
style 25L
Expanded &
slotted end
LL
SIZE Part NO.
4”
25L-40048
25L-40060
25L-40072
25L-40084
5”
25L-50048
25L-50060
25L-50072
25L-450084
6”
25L-60048
25L-60060
25L-60072
25L-60084
6” - 5”
25L-605048
25L-605060
25L-605072
25L-605084
L PART NO.
48”
25PL-40048
60”
25PL-40060
72”
25PL-40072
24”
25PL-40084
48”
25PL-50048
60”
25PL-50060
72”
25PL-50072
24”
25PL-50084
48”
25PL-60048
60”
25PL-60060
72”
25PL-60072
24”
25PL-60084
48”
25PL-605048
60”
25PL-605060
72”
25PL-605072
24”
25PL-605084
*ADD CP FOR CHROME PLATE
*ADD AZ FOR ALUMINIZED
37
EXAMPLES:
25L-40048CP
25L-40048AZ
LL
SLASH-CUT
CURVED STACK
EXTENSION
8" 8"
8" 8"
• DIRECTS NOISE UP AND OUT
• DIRECTS EXHAUST AWAY FROM TRAILER
• DOES NOT REQUIRE RAIN CAP
• MINIMIZES BACK PRESSURE
• UNIQUE DYNAFLEX DESIGN
ALUMINUM KILLED STEEL.
L L
SIZE
4”
5”
6”
6” - 5”
Part NO.
26-40024
26-40036
26-40048
26-40060
26-40072
26-40084
26-50024
26-50036
26-50048
26-50060
26-50072
26-50084
26-60024
26-60036
26-60048
26-60060
26-60072
26-60084
26-605048
26-605060
26-605072
26-605084
L
24”
36”
48”
60”
72”
84”
24”
36”
48”
60”
72”
84”
24”
36”
48”
60”
72”
84”
48”
60”
72”
84”
ALTERNATE MATERIAL:
*ADD CP FOR CHROME PLATE
*ADD AZ FOR ALUMINIZED
style 26
Expanded &
slotted end
PART NO.
26P-40024
26P-40036
26P-40048
26P-40060
26P-40072
26P-40084
26P-50024
26P-50036
26P-50048
26P-50060
26P-50072
26P-50084
26P-60024
26P-60036
26P-60048
26P-60060
26P-60072
26P-60084
26P-605048
26P-605060
26P-605072
26P-605084
EXAMPLES:
26-40024CP
26-40024AZ
L L
style 26P
plain end
38
Top Stacks
beautiful Polished chrome plate
Part Numbers for ordering separately
SIZE equivalent* Length
5”
6”
7”
8”
8ft **8ft 9ft
91/2ft 10ft
8ft **8ft 9ft
91/2ft
10FT
8ft
**8ft 9ft
91/2ft 10ft
8ft **8ft
9ft
91/2ft 10ft
Straight part no.
mitered
part no.
curved part no.
24p-50044cp 24p-50048cp 24p-50054cp
24p-50060cp 24p-50068cp 24p-60044cp 24p-60048cp 24p-60054cp
24p-80060cp 24p-80068cp 24mp-50044cp 24mp-50048cp 24mp-50054cp
24mp-50060cp 24mp-50068cp 24mp-60044cp 24mp-60048cp 24mp-60054cp
24mp-60060cp 24mp-60068cp
24mp-70044cp 24mp-70048cp 24mp-70054cp
24mp-70060cp 24mp-70068cp 24mp-80044cp 24mp-80048cp 24mp-80054cp
24mp-80060cp 24mp-80068cp 25p-50044cp
25p-50048cp
25p-50054cp
25p-50060cp
25p-50068cp
25p-60044cp
25p-60048cp
25p-60054cp
25p-60060cp
25p-60068cp
25p-70044cp
25p-70048cp
25p-70054cp
25p-70060cp
25p-70068cp
25p-80044cp
25p-80048cp
25p-80054cp
25p-80060cp
25p-80068cp
* equivalent length consists of stacktop and spool piece .
** for kenworth w900 a&B model only.
L
L
39
Style
24P
Style
24MP
Middle spool piece
with taperlock extension
1
taper lock extension
SIZE
48” Length “l” for KENWORTH 900 A & B
Models
52” Length “l” for model 379
Peterbilt, kw900l aerocab,
freightliner & western star
56” Length “l” for model 359 Peterbilt
5”
24zpx-50048cp 24zpx-50052cp 24zpx-50056cp 6” 24zpx-60048cp 24zpx-60052cp 24zpx-60056cp 7”
24zpX-70048cp 24zpX-70052cp 24zpX-70056cp 8”
24zpX-80048cp 24zpX-80052cp 24zpX-80056cp “L”
52"
ADD “Q” TO PN FOR QUIET MUFFLER.
for model 359 peterbilt: 56” spool piece length
change “52” in part no. to “56”
Example: 24zpx-Q60056cp
1
lower stack
part no.
SIZE
part no.
24zx-50048cp
24zx-50052cp
5”
6”
6”-5”
7”-5”
8”
8”-5”
taper lock extension
part no.
24zx-50056cp 24zx-60052cp
24zx-60056cp
24zx-60048cp
24zX-605052cp 24zX-605056cp 24zX-605048cp 24zx-705052cp 24zx-705056cp 24zx-705048cp 24zX-80052cp
24zX-80056cp
24zX-80048cp
24zX-805052cp
24zX-805056cp
24zX-805048cp
52”
52"
ADD “P” TO PN FOR PLAIN END.
EXAMPLE: 24ZPX-605052CP
ADD “Q” TO PN FOR QUIET MUFFLER, SIZES 6,7,8”.
EXAMPLE: 24ZX-Q605052CP
DESIGNED FOR
STANDARD
OEM ELBOW
1
Stack features internal extension device to permit rotation
of stack top to suit various installation requirements.
Patent Applied
© Copyright 2003 Dynaflex Products
40
Z SERIES STACK OF TWO PIECE DESIGN
STRAIGHT
stack style 24Z
TOP
STACK
LENGTH
TOP
STACK
LENGTH
1
USE 50BJ
MOUNT
CLAMP
WITH
MOUNTING
BRACKET
SIZE Length
part no.
8ft 24z-40096cp 9ft 24z-400108cp 4” 10ft 24z-400120cp 8ft 24z-50096cp 9ft 24z-500108cp 5”
91/2ft 24z-500114cp 10ft 24z-500120cp TOP
8ft 24z-60096cp STACK
9ft 24z-600108Cp 6”
1
LENGTH
9 /2ft 24z-600114cp 10ft 24z-600120cp 8ft 24z-70096cp 9ft 24z-700108cp 7”
91/2ft 24z-700114cp 10ft 24z-700120cp 8ft 24z-80096cp 9ft 24z-800108cp 8” 91/2ft 24z-800114cp 10ft 24z-800120cp TOP STACK
LENGTH
44” 54” 60” 44” 54” 60”
68” 44” 54” 60”
68”
44” 54” 60”
68” 44” 54” 60”
68” MITRED TOP
stack style 24ZM
part no.
24ZM-40096cp
24ZM-400108cp
24zM-400120cp
24zM-50096cp
24zM-500108cp
24ZM-500114cp
24zM-500120cp
24zM-60096cp
24zM-600108Cp
24ZM-600114cp
24zM-600120cp
24zM-70096cp
1
24zM-700108cp
24ZM-700114cp
24zM-700120cp USE 50BJ
24zM-80096cp
MOUNT
CLAMP
24zM-800108cp
WITH
24ZM-800114cp
MOUNTING
24zM-800120cp
BRACKET
TOP
STACK
LENGTH
DO NOT ORDER A 10FT STACK WHEN YOUR TOP BRACKET IS OVER 102”
FROM THE GROUND, TO AVOID EXCEEDING THE MAX. HEIGHT ALLOWED.
FOR A QUIET MUFFLER BUILT INTO THE
SPOOL STACK, ADD “Q” TO THE PART NO.
EXAMPLE: 24Z-Q60096CP
52”
52"
52"
52"
ADD “P”52"
IN PART NO. FOR PLAIN ENDS:
EXAMPLE: 24ZP-50096CP
52"
52”
USE THE OEM ELBOW P.N. FOR THE NON-SLIP FIT ELBOW.
ELIMINATE THE “Z” AND THE “X” IN THE PART NUMBER,
OEM EXAMPLE:
PETERBILT
KENWORTH
FREIGHTLINER
68 Degree
58 Degree
Dbl. Bend
14PB-1726CP
14PB-3050CP
14PB-L1380CP
14KW-R0742CP
14KW-R4764CP
14KW-R8616CP
14FL-6015CP
11P-6050CP
LOWER
STACK
style 24z
EXPANDED &
SLOTTED END
41
USE 50SJ
SOCKET
CLAMP
WITH
BRACKET
LOWER
STACK
1
Patent Applied
USE 50SJ
socket CLAMP
WITH BRACKET
style 24zm
EXPANDED &
SLOTTED END
Z SERIES STACK OF TWO PIECE DESIGN CURVED TOP
8"
style 25z
EXPANDED &
SLOTTED ENDs
SIZE
4” 5”
6” 7”
8” TOP
STACK
LENGTH
USE 50BJ
MOUNT
bracket CLAMP
1
52"
52”
style 26z
expanded &
slotted ENDS
part no.
8ft 25z-40096cp 9ft 25z-400108cp 10ft 25z-400120cp 8ft 25z-50096cp 9ft 25z-500108cp 91/2ft 24z-500114cp 10ft 25z-500120cp 8ft 25z-60096cp 9ft 25z-600108Cp 91/2ft 24z-600114cp 10ft 25z-600120cp 8ft 25z-70096cp 9ft 25z-700108cp 91/2ft 24z-700114cp 10ft 25z-700120cp 8ft 25z-80096cp 9ft 25z-800108cp 91/2ft 24z-800114cp 10ft 25z-800120cp Length
TOP STACK
LENGTH
44” 54” 60” 44” 54” 60”
68” 44” 54” 60”
68”
44” 54” 60”
68” 44” 54” 60”
68” TOP
TOP STACK
LENGTH
STACK
LENGTH
part no.
26z-40096cp
26z-400108cp
26z-400120cp
26z-50096cp
26z-500108cp
26Z-500114cp
26z-500120cp
26z-60096cp
26z-600108Cp
26Z-600114cp
26z-600120cp
USE 50BJ
MOUNT
bracket
CLAMP
1
Not available in 7”and 8”
diameters
52"
DO NOT ORDER A 10FT STACK WHEN YOUR TOP BRACKET IS OVER 102”
FROM THE GROUND, TO AVOID EXCEEDING THE MAX. HEIGHT ALLOWED.
EXAMPLE: 25Z-Q60096CP
LOWER
STACK
52”
60"
LOWER
STACK
ADD “P” IN PART NO. FOR PLAIN ENDS:
EXAMPLE: 25ZP-50096CP
ELIMINATE THE “Z” AND THE “X” IN THE PART NUMBER,
OEM EXAMPLE:
USE 50SJ
SOCKET CLAMP
WITH BRACKET
PETERBILT
KENWORTH
FREIGHTLINER
68 Degree
58 Degree
Dbl. Bend
14PB-1726CP
14PB-3050CP
14PB-L1380CP
14KW-R0742CP
14KW-R4764CP
14KW-R8616CP
14FL-6015CP
11P-6050CP
1
Patent Applied
USE 50SJ
socket CLAMP
WITH BRACKET
42
Z SERIES REDUCING STACKS OF TWO PIECE DESIGN
MITRED TOP
STACK
STYLE 24zM
curved stack style 25z
TOP
STACK
LENGTH
TOP
STACK
LENGTH
USE 50BJ
MOUNT
CLAMP
with
bracket
52"
52”
1
52"
LOWER
STACK
USE 50SJ SOCKET
CLAMP
1
Stack features internal extension
device to permit rotation of stack
top to suit various installation
requirements.
Patent Applied
© Copyright 2003
Dynaflex Products
43
SIZE
6” TO
5” 7” TO
5”
8” TO
5”
Length
SIZE
6” TO
5” 7” TO 5”
8” TO
5”
Length
SIZE
6” TO
5” 7” TO 5”
8” TO
5”
Length
8ft 9ft 91/2ft
10ft 8ft 9ft 91/2ft
10ft 8ft 9ft 91/2ft
10ft 8ft 9ft 91/2ft
10ft 8ft 9ft 91/2ft
10ft 8ft 9ft 91/2ft
10ft TOP STACK
part no.
LENGTH
24z-605096cp 44” 24z-6050108Cp 54” 24z-6050114cp 60”
24z-6050120cp 68”
24z-705096cp 44” 24z-7050108cp 54” 24z-7050114cp 60”
24z-7050120cp 68” 24z-805096cp 44” 24z-8050108cp 54” 24z-8050114cp 60”
24z-8050120cp 68” TOP STACK
part no.
LENGTH
24zM-605096cp 44” 24zM-6050108Cp 54” 24zM-6050114cp 60”
24zM-6050120cp 68”
24zM-705096cp 44” 24zM-7050108cp 54” 24zM-7050114cp 60”
24zM-7050120cp 68” 24zM-805096cp 44” 24zM-8050108cp 54” 24zM-8050114cp 60”
24zM-8050120cp 68” part no.
8ft 25z-605096cp 9ft 25z-6050108Cp 91/2ft 25z-6050114cp 10ft 25z-6050120cp 8ft 25z-705096cp 9ft 25z-7050108cp 91/2ft 25z-7050114cp 10ft 25z-7050120cp 8ft 25z-805096cp 9ft 25z-8050108cp 91/2ft 25z-8050114cp 10ft 25z-8050120cp FOR A QUIET MUFFLER
BUILT INTO THE SPOOL
STACK, ADD “Q” TO
THE PART NO.
EXAMPLE: 25Z-605096CP
TOP STACK
LENGTH
44” 54” 60”
68”
44” 54” 60”
68” 44” 54” 60”
68” STRAIGHT
STACK
STYLE 24z
part no.
24zp-605096cp
24zp-6050108Cp
24ZM-6050114cp TOP
24zp-6050120cp STACK
24zp-705096cp LENGTH
24zp-7050108cp
24ZM-7050114cp
24zp-7050120cp
24zp-805096cp
24zp-8050108cp
24ZM-8050114cp
24zp-8050120cp
TOP
STACK
LENGTH
USE 50BJ
MOUNT
CLAMP
with bracket
part no.
1
24zMp-605096cp
24zMp-6050108Cp
24ZMP-6050114cp
24zMp-6050120cp
24zMp-705096cp
24zMp-7050108cp
24ZMP-7050114cp
24zMp-7050120cp 52"
24zMp-805096cp
24zMp-8050108cp
24ZMP-8050114cp
24zMp-8050120cp
part no.
25zp-605096cp
25zp-6050108Cp
24ZP-6050114cp
25zp-6050120cp
25zp-705096cp
25zp-7050108cp
24ZP-7050114cp
25zp-7050120cp
25zp-805096cp
25zp-8050108cp
24ZP-8050114cp
25zp-8050120cp
52"
52”
LOWER
STACK
USE 50SJ SOCKET
CLAMP
WITH BRACKET
ELIMINATE THE “Z” AND THE “X” IN THE PART NUMBER, OEM EXAMPLE:
68 Degree
58 Degree
Dbl. Bend
PETERBILT
KENWORTH
14PB-1726CP
14PB-3050CP
14PB-L1380CP
14KW-R0742CP
14KW-R4764CP
14KW-R8616CP
FREIGHTLINER
14FL-6015CP
11P-6050CP
The New “Z” Series Monster Stacks
As illustrated on the opposite page, the letter “Z” will designate our new split stack design.
Example: 24ZMP-D6050120CP is a typical part number and the letter “Z” is added after the
first two numbers. The new “Z” stack will consist of a “spool” section and an upper stack to
achieve the desired stack height and style. The junction where the two meet incorporates a
slip-fit design at the location of the upper cab bracket. By using our wide band mounting bracket
clamp, the junction, or seam line, is covered. A high temperature sealant is provided with each
slip-fit connection to aid in sealing this juncture.
“Z” Series Stack & elbow combination breakdown
Please follow these instructions on how to order the “Z”
Series Stacks with elbow.
Elbow with
Extension
Peterbilt
Model 359
1982-1995
68° Angle
14zpbx-1726(dia)
Peterbilt
Model 379
1996-Present
58° Angle
14zpbx-3056(dia)
Spool Piece
24zpx-(dia)(Length) 24ZPX-(dia)(Length) 24zpx-(dia)(Length) 24ZPX-(dia)(Length) 24ZPX-(dia)(Length) 24ZPX-(dia)(Length)24zpx-(dia)(Length)
56” Long
52” Long
52” Long
48” Long
52” Long
52” Long
52” Long
Top Stack
Full P.N.
Assembly
44” = 8 ft.
54” = 9 ft.
60” = 91/2 ft.
68” = 10 ft.
44” = 8 ft.
54” = 9 ft.
60” = 91/2 ft.
68” = 10 ft.
44” = 8 ft.
54” = 9 ft.
60” = 91/2 ft.
68” = 10 ft.
48” = 8 ft.
54” = 81/2 ft.
60” = 9 ft.
44” = 8 ft.
54” = 9 ft.
44” = 8 ft.
54” = 9 ft.
44” = 8 ft.
54” = 9 ft.
Page 47
Page 46
Page 48
Page 51
Page 50
Page 49
Page 52
Wide Band Butt Joint Mtg.
Bracket Clamp
50BJ-APB((dia) Top 50BJ-APB(dia) Top
50BJ-PB(dia) Bott. 50BJ-PB(dia) Bott.
50bj-Apb(dia) Top 50bj-pb(dia) Bott.
50BJ-Kw(dia)
Top Only
50BJ-KWWL(dia) 50BJ-ub(dia)
Top Only
Top & Bottom
Change “L” to “R” for
Righthand clamp
Rod Picket Stacks
Peterbilt 379
1996-Present
Kenworth
W900 A&B
1993-Present
Kenworth W900L Aerocab
1995-Present
Freightliner
Model 120
1994-Present
Western Star
Heritage Cab ‘88-‘99
Constellation Cab
1999-Present
90° Long Leg Elbow 85° Elbow
14zpbx-rp(dia)
14zkwx0742(dia) 14zkwx-8616(dia) 14zflx-6015(dia) 14zwsxl-3440(dia)
50BJ-WSH(dia)=Heritage
50BJ-WSC(dia)=Constellation
Top & Bottom
“Z” Series conventional Stack breakdown
Please follow these instructions on how to order the “Z” Series Stacks
for conventional expanded & slotted ends using oe type elbow.
Style 24
Style 24M
Style 25
Style 26
Spool Piece
24zx-dia
52” Long
24zx-dia
52” Long
24zx-dia
52” Long
24zx-dia
52” Long
Top Stack
44”, 54”,
*60” & **68”
44”, 54”,
*60” & **68”
44”, 54”,
*60” & **68”
44”, 54”, ( 5” & 6” DIA only)
*60” & **68”
Full P.N. Assembly
Page 41
Page 41
Page 42
Page 42
Top Mtg. Bracket
Butt Joint Clamp
50bj-dia
per truck make
50bj-dia
per truck make
50bj-dia
per truck make
50bj-dia
per truck make
Bottom Mtg. Bracket 50SJ-DIA
Socket Joint Clamp
50SJ-DIA
50SJ-DIA
50SJ-DIA
OE Elbow
order separately
order separately
order separately
order separately
* 60” Top stack only available for Peterbilt. ** 68” May exceed maximum legal height requirements.
Stack tolerances plus or minus 2 inches.
44
INTRODUCING THE NEW Z SERIES
THREE PIECE MONSTER STACK
•
The two piece stack and elbow will slip together where
the upper and lower cab brackets are located.
MAX HEIGHT
ALLOWED
162”
TOP
STACK
•
The Dynaflex 50BJ series mounting bracket clamps will cover the seam line.
•
each taper lock Extension tube contains a hi-temp sealant.
•
Inter-mix spool pIECE with any top stack oR bottom elbow.
•
Shipments can go via ups.
•
Spool piece is offered with AN optional built-in muffler.
•
dynaflex one year warranty.
1
cab BRACKET
USE 50BJ
wide band
MOUNT CLAMP
WITH BRACKET
SPOOL
PIECE
100” HEIGHT AT
THIS POINT
top stack style 24m
top stack style
25
This stack
and elbow
consists of
these three
pieces
top stack style 24
taper lock EXTENSION
1
cab BRACKET
USE 50BJ
wide band
MOUNT CLAMP
WITH BRACKET
1
BOTTOM
ELBOW
PETERBILT
STYLE SHOWN
1
Patent Applied
45
1
Spool piece AVAILABLE
48”, 52” or 56”
LENGTH
taper lock EXTENSION
see chart
page 44
bottom elbow
Three Piece Z SERIES Stacks
5”/6”/7”/8”
peterbilt stack extensions
MODEL 379
PETERBILT-58° ELBOW AND 52” SPOOL PIECE
TOP
STACK
LENGTH
MITRED TOP
STACK
STYLE 24zMp
CURVED
STACK STYLE 25zp
SIZE
USE 50BJ
MOUNT
CLAMP
WITH
BRACKET
SPOOL
PIECE
50BJ
USE
MOUNT
CLAMP
52"
1. NOTE: Z IN PART NO. = NEW 3 PIECE STACK ELBOW COMBINATION.
2. Note: “D” in part no. = model 379 peterbilt 58° elbow
equiv. to oem no 14-03056, 1994-present.
3. NOTE: SPOOL PIECE LENGTH = 52 INCHES, on this model.
1
WITH
BRACKET
1
58° ELBOW
model 379
STRAIGHT
STACK
STYLE 24zp
5”
6”
6”
TO
5”
7”
TO
5”
8”
TO
5”
Total Length
8ft 9ft 91/2ft
10ft 8ft 9ft 91/2ft
10ft 8ft 9ft 91/2ft
10ft 8ft 9ft 91/2ft
10ft 8ft 9ft 91/2ft
10ft TOP
Straight mitred
curved
STACK
part no.
part no.
part no.
LENGTH
24zp-D50096cp 24zmp-D50096cp 25zp-D50096cp
44”
54”
24ZP-D500114CP 24ZMP-D500114CP 25ZP-D500114CP
60”
68”
44”
54”
24ZP-D600114CP 24ZMP-D600114CP 25ZP-D600114CP
60”
68”
44”
24zp-D6050108cp 24zmp-D6050108cp 25zp-D6050108cp 54”
24ZP-D6050114CP 24ZMP-D6050114CP 25ZP-D6050114CP 60”
44”
44”
EXAMPLE: 25zp-dq6050108cp
6” ELBOW REDUCED TO 5”
PN-14ZPBX-30566050CP
1
Patent Applied
46
Three Piece Z SERIES Stacks
5”/6”/7”/8”
peterbilt stack extensions
MODEL 359
PETERBILT-68° ELBOW AND 56” SPOOL PIECE
TOP
STACK
LENGTH
MITRED TOP
STACK
STYLE 24zMp
STRAIGHT
STACK
STYLE 24zp
CURVED STACK STYLE 25zp
1. NOTE: “Z” IN PART NO. = NEW 3 PIECE STACK ELBOW COMBINATION.
2. NOTE: “A” IN PART NO. = MODEL 359 PETERBILT 68° ELBOW
EQUIV. TO OEM NO. 14-01726, 1980-1994.
3. NOTE: SPOOL PIECE LENGTH = 56 INCHES, on this model.
USE 50BJ
MOUNT
CLAMP
WITH
BRACKET
56”
USE 50BJ
MOUNT
CLAMP
WITH
BRACKET
SIZE
1
1
Total Length
8ft 9ft 91/2ft
10ft 8ft 9ft 91/2ft
10ft 8ft 9ft 91/2ft
10ft 8ft 9ft 91/2ft
10ft 8ft 9ft 91/2ft
10ft 5”
6”
6”
TO
5”
7”
TO
5”
8”
TO
5”
EXAMPLE: 25zp-Aq6050108cp
SPOOL
PIECE
68° ELBOW
PN-14ZPBX-17266050CP
model 359
47
TOP
Straight mitred
curved
STACK
part no.
part no.
part no.
LENGTH
24zp-A50096cp 24zmp-A50096cp 25zp-A50096cp
44”
54”
24ZP-A500114CP 24ZMP-A500114CP 25ZP-A500114CP
60”
68”
44”
54”
24ZP-A600114CP 24ZMP-A600114CP 25ZP-A600114CP
60”
68”
44”
24zp-A6050108cp 24zmp-A6050108cp 25zp-A6050108cp 54”
24ZP-A6050114CP 24ZMP-A6050114CP 25ZP-A6050114CP 60”
44”
44”
1
Patent Applied
long leg 90° picket elbow
6”/7”/8”
rod picket monster stacks
MODEL 379
52” SPOOL PIECE
TOP
STACK
LENGTH
MITRED TOP
STACK
STYLE 24zMp
CURVED
STACK STYLE 25zp
52"
NOTE: Z IN PART NO. = NEW 3 PIECE STACK ELBOW COMBINATION.
Note: “rp” in part no. = rod picket combo for
model 379 peterbilt elbow 14zpbx-rp(dia)
NOTE: SPOOL PIECE LENGTH = 52 INCHES, on this model.
SIZE
1
USE 50bj
MOUNT
CLAMP
WITH
BRACKET
SPOOL
PIECE
1
USE 50bj
MOUNT
CLAMP
WITH
BRACKET
1.
2.
3.
STRAIGHT
STACK
STYLE 24zp
5”
6”
6”
TO
5”
7”
TO
5”
8”
TO
5”
Total Length
8ft 9ft 91/2ft
10ft 8ft 9ft 91/2ft
10ft 8ft 9ft 91/2ft
10ft 8ft 9ft 91/2ft
10ft 8ft 9ft 91/2ft
10ft TOP
Straight mitred
curved
STACK
part no.
part no.
part no.
LENGTH
24zp-RP50096cp 24zmp-RP50096cp 25zp-RP50096cp
44”
54”
24ZP-RP500114CP 24ZMP-RP500114CP 25ZP-RP500114CP
60”
68”
44”
54”
24ZP-RP600114CP 24ZMP-RP600114CP 25ZP-RP600114CP
60”
68”
44”
24zp-RP6050108cp 24zmp-RP6050108cp 25zp-RP6050108cp 54”
24ZP-RP6050114CP 24ZMP-RP6050114CP 25ZP-RP6050114CP 60”
44”
24ZP-RP7050114CP 24ZMP-RP7050114CP 25ZP-RP7050114CP 60”
44”
24ZP-RP8050114CP 24ZMP-rp8050114CP 25ZP-rp8050114CP 60”
EXAMPLE: 25zp-RPq6050108cp
90° ELBOW
1
PN-14ZPBX-RP6050CP
Patent Applied
48
Three Piece z series Stacks
5”/6”/7”/8”
freightliner stack extensions with 90° elbow
freightliner model 120
1985 to present conventional cab
TOP
STACK
LENGTH
MITRED TOP
STACK
STYLE 24zMp
curved stack style 25zp
STRAIGHT
STACK
STYLE 24zp
1
1. Note: “F” in Part No. = OEM 04-04589-015 ELBOW STYLE.
2. note: spool piece length= 52” on this model.
USE 50BJ-ub
MOUNT
CLAMP
with
SIZE
Total bracket Length
part no.
part no.
52"
SPOOL
PIECE
5”
6” TO 5”
7” TO 5”
8” TO 5”
8ft 9ft 8ft 9ft 8ft 9ft 8ft 9ft 24zp-F50096cp 24zmp-F50096cp 24zp-F500108cp 24zmp-F500108cp 24zp-F605096cp 24zmp-F605096cp 24zp-F6050108cp 24zmp-F6050108cp 24zp-F705096cp 24zmp-F705096cp 24zp-F7050108cp 24zmp-F7050108cp 24zp-F805096cp 24zmp-F805096cp 24zp-F8050108cp 24zmp-F8050108cp TOP
STACK
part no.
LENGTH
25zp-f50096cp
44”
25zp-F500108cp
54”
25zp-F605096cp
44”
25zp-F6050108cp 54”
25zp-F705096cp
44”
25zp-F7050108cp 54”
25zp-F805096cp
44”
25zp-F8050108cp 54”
EXAMPLE: 25ZP-FQ605096CP
USE 50BJ-UB
mount CLAMP
with bracket
1
90° ELBOW
PN-14ZFLX-60156050CP
49
1
Patent Applied
THREE PIECE Z SERIES STACKs
5” & 6” diameters
kenworth 1995 to present
aerocab™ W900L Model
UNDER FRAME
TOP
STACK
LENGTH
MITRED TOP
STACK
STYLE 24zM
STRAIGHT
STACK
STYLE 24z
curved stack style 25z
USE
50BJKWWL
MOUNT
CLAMP
with
bracket
1
SIZE
52"
52”
used w/ 45” extended steps
1. Note: “V” in part No. = oem K180-18616 elbow style longer elbow 2. note: spool piece length= 52” on this model.
5”
6” TO 5”
7” TO 5”
8” TO 5”
Total Length
8ft 9ft 8ft 9ft 8ft 9ft 8ft 9ft part no.
part no.
24z-RV50096CP 24zm-RV50096CP
24z-RV500108CP 24zm-RV500108CP
24z-RV605096CP 24zm-RV605096CP 24z-RV6050108CP 24zm-RV6050108CP 24z-RV705096CP 24zm-RV705096CP 24z-RV7050108CP 24zm-RV7050108CP 24z-RV805096CP 24zm-RV805096CP 24z-RV8050108CP 24zm-RV8050108CP Replace “R” in part no. with “L” for left SIDE elbow
SPOOL
PIECE
USE
50BJ-DIA
OR 45-DIA
CLAMP 1
wiTHout
bracket
used W/ STANDARD 40” STEPS
1. Note: “W” in part No. = oem K180-18615 elbow style SHORTer elbow 2. note: spool piece length= 52” on this model.
SIZE
TOP
STACK
part no.
LENGTH
25z-RV50096
44”
25z-RV500108
54”
25z-RV605096
44”
25z-RV6050108
54”
25z-RV705096
44”
25z-RV7050108
54”
25z-RV805096
44”
25z-RV8050108
54”
5”
6” TO 5”
7” TO 5”
8” TO 5”
6"DIA
PN-14ZKWXL86166050CP
Total Length
8ft 9ft 8ft 9ft 8ft 9ft 8ft 9ft TOP
STACK
part no.
part no.
part no.
LENGTH
24z-RW50096CP 24zm-RW50096CP 25z-RW50096CP
44”
24z-RW500108CP 24zm-RW500108CP 25z-RW500108CP 54”
24z-RW605096CP 24zm-Rw605096CP 25z-RW605096CP 44”
Replace “R” in part no. with “L” for left SIDE elbow
10 ft. length exceeDs oal height
11"
EXAMPLE: 25Z-RVQ605096CP
5"O
D
1
Patent Applied
50
5”/6”/7”/8”
kenworth stack extensions with
23° and 90° double bend elbow
model w900 a (UNDER FRAME)
and b (over FRAME)
CURVED
stack
style 25z
straight
stack
style 24z
mitred top
stack style 24zm
TOP
STACK
LENGTH
1. Note: “Z” in Part No. = New 3 Piece stack elbow combination.
2. Note: “B” in part no. = elbow style equiv. to oem no. 180-B-10742
used on w900A (A model KW) as shown this page.
3. NOTE: “C” in part no. = elbow style equiv. to oem no. 180-14764
used on W900B (B model KW).
SIZE
5”
6”
TO
5”
7”
TO
5”
8”
TO
5”
“B” MODEL - ovER FRAME
“A” MODEL - UNDER FRAME
5”
6”
TO
5”
7”
TO
5”
8”
TO
5”
Total Length
8ft 81/2ft 9ft*
8ft 81/2ft 9ft*
8ft 81/2ft 9ft*
8ft 81/2ft 9ft*
part no.
24z-RB50096cp 24z-RB500102cp 24z-RB500108CP
part no.
24zm-RB50096cp 24zm-RB500102cp 24zm-RB500108CP
TOP
STACK
LENGTH
part no.
25z-RB50096cp
48”
25z-RB500102cp
54”
24z-RB500108CP
60”
25z-RB605096cp
48”
25z-RB6050102cp 54”
25z-RB6050108CP 60”
25z-RB705096cp
48”
25z-RB7050102cp 54”
25z-RB7050108CP 60”
25z-RB805096cp
48”
25z-RB8050102cp 54”
25z-RB8050108CP 60”
8ft 81/2ft 9ft*
8ft 81/2ft 9ft*
8ft 81/2ft 9ft*
8ft 81/2ft 9ft*
24z-RC50096cp 24z-RC500102cp 24z-RC500108CP
24z-RC605096cp 24z-RC6050102cp 24z-RC6050108CP
24z-Rc705096cp 24z-Rc7050102cp 24z-Rc7050108CP
24z-Rc805096cp 24z-Rc8050102cp 24z-Rc8050108CP
24zm-RC50096cp 24zm-RC500102cp 24zm-RC500108CP
24zm-RC605096cp 24zm-RC6050102cp 24zm-RC6050108CP
24zm-Rc705096cp 24zm-Rc7050102cp 24zm-Rc7050108CP
24zm-Rc805096cp 24zm-Rc8050102cp 24zm-Rc8050108CP
25z-RC50096cp
25z-RC500102cp
25z-RC500108CP
25z-RC605096cp
25z-RC6050102cp
25z-RC6050108CP
25z-Rc705096cp
25z-Rc7050102cp
25z-Rc7050108CP
25z-Rc805096cp
25z-Rc8050102cp
25z-Rc8050108CP
48”
54”
60”
48”
54”
60”
48”
54”
60”
48”
54”
60”
1
USE
50BJ-kw
MOUNT
CLAMP
with
bracket
52"
48”
SPOOL
PIECE
1
USE
50BJ-DIA
OR 45-DIA
CLAMP
without
bracket
REPLACE “R” IN PART NO. WITH “L” FOR LEFT SIDE ELBOW
*EXCEEDS 13FT. 6 INCH MAX HEIGHT ALLOWED.
EXAMPLE: 25Z-RBQ605096CP
1
51
Stack features internal extension device to permit rotation of
stack top to suit various installation requirements.
Patent Applied
6” elbow Reduced to 5”
pn14zkwx07426050cp
5”/6”/7”/8”
western star monster stacks with 85° elbow
1989 to present constellation cab
1988 to 1999 heritage cab
OVER FRame APPLICATION
TOP
STACK
LENGTH
MITRED TOP
STACK
STYLE 24zMp
curved stack style 25zp
STRAIGHT
STACK
STYLE 24zp
CONSTELLATION
1. Note: “ws” in Part No. = OEM 23527-3440 ELBOW STYLE.
USE 50bj-wsc
MOUNT CLAMP
with bracket
3. note: same part no. for constellation & heritage cabs
CONSTELLATION cab mtg. bracket claMp=50bj-wsC(dia)
1
52"
SPOOL
PIECE
SIZE Total Length
8ft 5”
9ft 8ft 6” TO 5”
9ft 8ft 7” TO 5”
9ft 8ft 8” TO 5”
9ft TOP
STACK
part no.
part no.
part no.
LENGTH
24zp-WS50096cp 24zmp-WS50096cp 25zp-ws50096cp
44”
24zp-WS500108cp 24zmp-WS500108cp 25zp-WS500108cp
54”
44”
24zp-WS6050108cp 24zmp-WS6050108cp 25zp-WS6050108cp 54”
24zp-WS705096cp 24zmp-WS705096cp 25zp-F705096cp
44”
24zp-WS7050108cp 24zmp-WS7050108cp25zp-F7050108cp
54”
44”
24zp-WS8050108cp 24zmp-WS8050108cp25zp-WS8050108cp 54”
CONSTELLATION
USE 50bj-wsc
mount CLAMP
with bracket
EXAMPLE: 25ZP-WSQ605096CP
1
14zwsxl-34406050CP
85° ELBOW
1
Patent Applied
52
PETERBILT CLAMPS
New! Wide Band Mounting Bracket Clamps
especially designed TO cover the seam line on Z SERIES stacks butt joint clamp
For use with slip-fit
monster stacks and OTHER straight STACKS
butt joint clamp
without mounting
bracket
butt joint clamp with ANGLE
BRAcKET
this new bracket ALLOWS ANGULATION
OF STACK TO CLEAR
STEPS AND DOOR
Peterbilt PN
eterbilt PN
P
50BJ-PB500CP
50BJ-APB500CP
CLAMP PART NO.
I.D.
SIZE
50BJ-500CP
5”
50BJ-PB600CP
50BJ-APB600CP
6”
50BJ-600CP
50BJ-PB700CP
50BJ-APB700CP
7”
50BJ-700CP
50BJ-PB800CP 50BJ-APB800CP 8”
50BJ-800CP
KENWORTH WIDE A&B MODEL
KENWORTH AEROCAB
WIDE MOUNTING BRACKET CLAMP
butt joint clamp
KENWORTH PN
W900L MODEL TOP
wide MOUNTiNG BRACKET CLAMP
butt joint
TOP MOUNTING BRACKET CLAMP
50BJ-KW500CP
For use with
slip-fit
monster stacks and OTHER
straight STACKS
SIZE
PART NO.
50BJ-KWWL500CP 5”
6”
50BJ-KWWL600CP 7”
50BJ-KWWL700CP
8”
50BJ-KWWL800CP
50BJ-KW600CP
50BJ-KW700CP
50BJ-KW800CP
CHANGE “L” TO “R”-FOR RIGHT HAND CLAMP
FREIGHTLINER/UNIVERSAL
Chrome Plated Mounting Bracket Clamp
with welded nut for 5”, 6” and 8” stacks
L
WIDE MOUNTING BRACKET CLAMP
butt joint
UNIVERSAL MOUNTING
BRACKET CLAMP
MOUNTS DIRECTLY TO
ORIGINAL CAB BRACKET.
INTERCHANGEABLE
WITH STANDARD U-BOLT
SADDLE CLAMPS.
WESTERN STAR
wide mounting bracket clamp
heritage cab
l=3 3/8
SIZE
PART NO.
5” 50BJ-UB500CP 53
6”
50BJ-UB600CP
7” 50BJ-UB700CP
8” 50BJ-UB800CP
BUTT JOINT
CLAMP
TUBE DIA. CLAMP P.N.
CONSTELLATION
cab
l=2 1/2
CLAMP P.N.
5”
50BJ-WSH500CP
50BJ-WSC500CP
6”
50BJ-WSH600CP
50BJ-WSC600CP
7”
50BJ-WSH700CP
50BJ-WSC700CP
8”
50BJ-WSH800CP
50BJ-WSC800CP
NEW WIDE BAND SOCKET CLAMPS
DESIGNED TO FIT OVER EXPANDED AND SLOTTED TUBE ENDS
SIZE
PART NUMBER
WITHOUT BRACKET
5”
50SJ-500-ICP
6”
50SJ-600-ICP
7”
50SJ-700-ICP
8”
50SJ-800-ICP
for use on
traditional expanded & slotted stacks
SIZE
PETERBILT
SOCKET CLAMP
WITH ANGLE bracket
PETERBILT
SOCKET CLAMP
WITH MOUNTING bracket
SIZE PETERBILT P.N.
PETERBILT P.N.
5”
50SJ-APB500-ICP
6”
50SJ-APB600-ICP
7”
50SJ-APB700-ICP
8”
50SJ-APB800-ICP
for use on
87bc muffler stacks
OR OTHER MUFFLERS
KENWORTH
SOCKET CLAMP
WITH MOUNTING bracket
SIZE
KENWORTH P.N.
5”
50SJ-PB500-ICP 5”
50SJ-KW500-ICP
6”
50SJ-PB600-ICP
6”
50SJ-KW600-ICP
7”
50SJ-PB700-ICP
7”
50SJ-KW700-ICP
8”
50SJ-PB800-ICP
8”
50SJ-KW800-ICP
WESTERN STAR
SOCKET CLAMP
WITH MOUNTING
bracket
FREIGHTLINER
SOCKET CLAMP
WITH UNIVERSAL bracket
SIZE
heritage cab
l=3 3/8
TUBE DIA. CLAMP P.N.
CONSTELLATION cab
l=2 1/2
CLAMP P.N.
5”
50SJ-WSH500-ICP 50SJ-WSC500-ICP
6”
7”
8”
PART NUMBER
WITH BRACKET
5”
50SJ-UB500-ICP
6”
50SJ-UB600-ICP
7”
50SJ-UB700-ICP
8”
50SJ-UB800-ICP
54
RAIN CAPS
FOR STRAIGHT STACKS
style 27
STANDARD FINISH
ZINC PLATED
ALTERNATE MATERIAL:
EXAMPLE:
27-400CP
SIZE
11/4”
11/2”
13/4”
2”
21/4”
21/2”
2 3/4”
3”
31/2”
4”
41/2”
5”
51/2”
6”
61/2”
PART NO.
27-125Z
27-150Z
27-175Z
27-200Z
27-225Z
27-250Z
27-275Z
27-300Z
27-350Z
27-400Z
27-450Z
27-500Z
27-550Z
27-600Z
27-650Z
45° RAIN CAPS
redesigned
NEw
45° cap FOR mitred STACKS
NOISE
CUSHION
STANDARD MATERIAL CARBON
STEEL CHROME PLATED
NOISE
NOISE
CUSHION CUSHION
INTERNALINTERNAL
NOISE
CLAMPINGBAND
CLAMPINGBANDCUSHION
INTERNAL
CLAMPINGBAND
EXPANSION
T-BOLT
SIZE
PART NO.
5”
6”
28QT-500CP
28QT-600CP
7”
28QT-700CP
INTERNAL
INTERNAL
8”
28QT-800CP
CLAMPINGBAND
CAPHINGE
EXPANSION
EXPANSION
INTERNALINTERNAL
TURNBUCKLEBOLT
TURNBUCKLEBOLT
PATENT
APPLIED
CAPHINGE
CAPHINGE
EXPANSION
TURNBUCKLEBOLT
Stack
CAPS
INTERNAL
CAPHINGE
To Fit Over Existing Exhaust STACKS
L
L
L
STANDARD MATERIAL CARBON STEEL
PART NO.
L
SIZE
3”
29-300
8”
31/2”
29-350
8”
4”
29-400
9”
5”
29-500
101/2”
6”
29-600
12”
8”
29P-800
17”
style 29P
PLAIN END
55
L
L
L
EXAMPLES:
29-400CP
29-400AZ
style 29
Expanded &
slotted end
LL
LL
FLEX HOSE COUPLERS
STRAIGHT TUBE COUPLERS
L L
L L
O.D.
O.D.
I.D.
I.D.
O.D.
O.D.
I.D.
I.D.
I.D.I.D.
I.D.I.D.
SIZE
PART NO.
L
2”
31-200
41/2”
21/2”
31-250
41/2”
3”
31-300
5”
3”
31L-300
61/2”
31/2”
31-350
51/2”
31/2”
31L-350
7”
4”
31-400
6”
4”
31L-400
71/2”
5”
31-500
6”
5”
31L-500
71/2”
51/2”
31-550
6”
6”
31-600
6”
ALTERNATE Materials:
ADD AZ FOR ALUMINIZED (3” - 5” ONLY)
EXAMPLES:
31-400CP
31-400AZ
31-400S
ALTERNATE MaterialS:
WW
WW
style 33
Expanded &
slotted end
LL
LL
style 33P R R
PLAIN END
L L
R R
EXAMPLES:
32-400CP
32-400AZ
32-400S
CONNECTOR FITS O.D. TUBING
exhaust y-divider
WW
RR
I.D.I.D.
SIZE
PART NO.
L
2”
32-200
41/2”
21/2”
32-250
41/2”
3”
32-300
5”
3”
32L-300
61/2”
321/2”
32-350
51/2”
321/2”
32L-350
7”
4”
32-400
61/2”
4”
32L-400
8”
5”
32-500
61/2”
5”
32L-500
8”
51/2”
32-550
61/2”
6”
32-600
61/2”
6”
32L-600
8”
FITS I.D. AND O.D. TUBING
WW
I.D.
I.D.
L L
R R
USED TO CONVERT SINGLE EXHAUST ENGINE TO A DUAL EXHAUST SYSTEM
SIZE
2”
21/2”
3”
31/2”
4”
4”
5”
5”
6”
PART NO.
33-200
33-250
33-300
33-350
33-400
33L-400
33-500
33L-500
33-600
L
4”
41/2”
51/2”
61/2””
71/2”
12”
9”
15”
11”
W
9”
10”
11”
13”
15”
24”
18”
30”
22”
ALTERNATE Material: ADD CP FOR CHROME PLATE
R
2”
21/2”
3”
31/2”
4”
4”
5”
5”
6”
PART NO.
33P-200
33P-250
33P-300
33P-350
33P-400
33PL-400
33P-500
33PL-500
33P-600
33-400CP
56
exhaust y-divider
WITH MOUNTING BRACKET
11/2" 11/2"
11/2" 11/2"
11/2"
11/2"
65/161"1/26" 5/16"
65/16"
L
R
L
R
R
W
L
R
R
W
W
65/16"
65/16"
style 33B
Expanded &
slotted end
R
65/161"1/26" 5/16"
L
65/16"
L
R
L
R
style 33BW
P
PLAIN END
L
W
W
W
L
W
SIZE
PART NO.
L
W
R
PART NO.
4”
33B-400
71/2”
15”
4”
33BP-400
4”
33B L-400
12”
24”
4”
33B PL-400
5”
33B-500
9”
18”
5”
33B P-500
5”
33B L-500
15”
30”
5”
33B PL-500
ALTERNATE MATERIAL:
EXAMPLE:
33B-400CP
exhaust y-divider EXPANDED ADAPTOR
W
W
W
W
O.D. O.D.
W
.
style 33-4050
Expanded &
slotted end
O.D.
R
L
L R
R
W
O.D. O.D.
O.D.
L
R
L style 33
P-4050
R
PLAIN END
I.D.INLET
I.D.INLET
I.D.INLET
L
R
L R
O.D.INLET
O.D.INLET
O.D.INLET
I.D.INLET
O.D.INLET
SIZE
PART NO. INLET OUTLET
L
W
R
PART NO.
3” - 4”
33-3040
3”
4”
71/2”
15”
4”
33P-3040
31/2” - 4”
33-3540
31/2”
4”
71/2”
15”
4”
33P-3540
4” - 5”
33-4050
4”
5”
9”
18”
5”
33 P-4050
5” - 6”
33-5060
5”
6”
101/2”
22”
6”
33P-5060
ALTERNATE MATERIAL:
57
W
O.D.
R
W
EXAMPLE:
33P-3040CP
L
L
oo
45oo
45
45
o
45
exhaust 45°- divider
o
L
W
W
L
W
R
R
R
style 34-400-45
Expanded &
slotted end
45o
style 34P-400-45
PLAIN END
L
W
L
W
SIZE
4”
4”
5”
5”
STANDARD MATERIAL
COLD ROLLED ALUMINUM KILLED STEEL
USED TO CONVERT DUAL EXHAUST ENGINE
TO A SINGLE EXHAUST SYSTEM
PART NO.
L
W
R
34-400-45
13”
10”
4”
34 L-400-45
16”
12”
5”
34-500-45
13”
10”
4”
34 L-500-45
16”
12”
5”
W
W
45o
R
R
L
EXAMPLES:
34P-400-45CP
34P-400-45AZ
W
style 34P
PLAIN END
style 34
Expanded &
slotted end
W
W
L
L
W
W
R
W R
R
L
L
W
SIZE
3”
31/2”
4”
5”
6”
STANDARD MATERIAL
COLD ROLLED ALUMINUM KILLED STEEL
USED TO CONVERT DUAL EXHAUST ENGINE
TO A SINGLE EXHAUST SYSTEM
PART NO.
L
W
R
34-300
81/2”
51/2”
3”
34 -350
10”
61/2”
31/2”
1
1
34 -400
11 /2”
7 /2”
4”
34-500
14”
9”
5”
34 -600
21”
11”
6”
L
PART NO.
34P-400-45
34 PL-400-45
34P-500-45
34 PL-500-45
exhaust T-divider
W
W
R
EXAMPLES:
34-400CP
34-400AZ
W
R
W R
R
L
L
PART NO.
34P-300
34 P-350
34 P-400
34P-500
34 P-600
58
W
W
W
W
W
L
style 34
W
Expanded
&R
slotted end
R
I.D.OUTLET
W
exhaust T-divider
W
EXPANDED ADAPTOR
W
L
L
I.D.OUTLET
W
R
W
L
style 34P
Expanded
R
PLAIN END
W
L
L
L
O.D.OUTLET O.D.OUTLET
W
W
R
R
R
I.D.OUTLET
W
I.D.OUTLET
O.D.OUTLET
L
O.D.OUTLET
USED TO CONVERT DUAL EXHAUST ENGINE TO A SINGLE EXHAUST SYSTEM
SIZE
3” - 4”
31/2” - 4”
4” - 5”
5” - 6”
PART NO.
34-3040
34 -3540
34 -4050
34-5060
L
9”
10”
11”
131/2”
ALTERNATE MATERIAL:
PART NO.
34P-3040
34 P-3540
34 P-4050
34P-5060
EXAMPLE:
34P-3040CP
34P-3040AZ
L
I.D.
style 35
both ends
Expanded & slotted
I.D.
reducer fits o.d. tubing
59
R
3”
31/2”
4”
5”
EXPANDErs --- reducers
L
I.D.
W
6”
61/2”
7”
81/2”
L
I.D.
I.D.
O.D.
L
O.D. O.D.
STANDARD
MATERIAL
L
L CARBON STEEL
SIZE
2” -21/4”
2” -21/2I.D.
”
21/2”-3”
3” -31/2”
3” -4”
31/2”-4”
31/2”-41/2”
31/2”-5”
4” -41/2”
4” -5”
5” -51/2”
5” -6”
PART NO.
35-2022
35I.D.
-2025
35 -2530
35 -3035
35-3040
35 -3540
35 -3545
35 -3550
35 -4045
35 -4050
35 -5055
35-5060
L
6” 6” I.D.
6” 6” 61/2” 6”
7”
8”
61/2”
8”
61/2”
8”
PART NO.
35P-2022
35 P-2025O.D.
35 P-2530
35 P-3035
35P-3040
35 P-3540
35 P-3545
35 P-3550
35 P-4045
35 P-4050
35 P-5055
35P-5060
EXAMPLES:
35-2022CP
35-3030AZ
35-3035S
O.D.
L
style 35P
PLAIN END
O.D. O.D.
L
L
L
L
expanders
O.D.
O.D.
O.D.
L L
I.D.
I.D.
O.D.
O.D.
I.D.
STANDARD MATERIAL O.D.
CARBON STEEL O.D.
SIZE
2” -21/4”
2” -21/2”
21/2” -3”
3” -31/2”
3” -4”
31/2” -4”
31/2” -41/2”
31/2” -5”
4” -41/2”
4” -5”
41/2” -5”
5” -51/2”
5” -6”
PART NO.
36-2022
36-2025
36-2530
36-3035
36-3040
36-3540
36-3545
36-3550
36-4045
36-4050
36-4550
36-5055
36-5060
I.D.
I.D.I.D.
LARGE END: PLAIN
SMALL END: EXPANDED & SLOTTED
L
6”
6”
6”
6”
61/2”
6”
7”
8”
61/2”
8”
8”
61/2”
8”
SIZE
21/4” -2”
21/2” -2”
3” -21/2”
31/2” -3”
4” -3”
4” -31/2”
41/2” -31/2”
5” -31/2”
41/2” -4”
5” -4”
5” -41/2”
51/2” -5”
6” -5”
PART NO.
37-2220
37-2520
37-3025
37-3530
37-4030
37-4035
37-4535
37-5035
37-4540
37-5040
37-5045
37-5550
37-6050
L
6”
6”
6”
6”
61/2”
6”
7”
8”
61/2”
8”
8”
61/2”
8”
Reducer FITS
I.D. AND O.D.
TUBING
EXAMPLES:
36-2022CP
36-3035AZ
36-3035S
tilt cab connectors
L
L
L
L L style 38
TOP
PART NO.
38-400
38P-400
38L-400
38PL-400
38-500
38P-500
38L-500
38PL-500
L
41/2”
41/2”
8”
8”
5”
5”
9”
9”
L
L
L
style 39
L LBOTTOM with
top with
wear plate
SIZE
4”
TOP
5”
TOP
I.D.
I.D.
style 37
ADD AZ FOR ALUMINIZED (3”-31/2” to 5”-6” ONLY)
L
L
L L
O.D.
O.D.
I.D.I.D.
SMALL END: PLAIN
LARGE END: EXPANDED & SLOTTED
reducers
O.D.
style 36
L
L
L
STYLE “P” INDICATES PLAIN (O.D.) ENDS
STYLE “L” INDICATES LONG LENGTHS
L
41/2”
41/2”
8”
8”
5”
5”
9”
9”
EXAMPLES:
38-400CP
38-400AZ
style 39
BALL TYPE
BOTTOM
SIZE
4”
TOP
5”
TOP
4”
BOTTOM
5”
BOTTOM
L
L L
L L
wear plate
BOTTOM.
PART NO.
39-400
39P-400
39L-400
39PL-400
39-500
39P-500
39L-500
39PL-500
L
L
L
style 38
FORMED TOP
PART NO.
38-401
38P-401
38-501
38P-501
39-401
39-501
ALTERNATE MATERIALS: ADD CP FOR CHROME PLATE
ADD E FOR EXPANDED END
L
5 3/4”
5 3/4”
5 3/4”
5 3/4”
3 3/4”
6”
EXAMPLES:
38-401CP
38-401E
60
tilt cab connector
with 90° elbows
BOTTOM WITH WEAR PLATE
R
R
L
R
L
R
R
L
LR
L
L
L
R
SIZE
4”
4”
5”
5”
L
L
PART NO.
39-400-10
39P-400-10
39-500-10
39P-500-10
SHORT RADIUS 90° ELBOW
L
111/2”
111/2”
14”
14”
ADD AZ FOR ALUMINIZED L
L
STYLE “P” INDICATES PLAIN (O.D.) ENDS
STANDARD RADIUS 90° ELBOW
L
L
L
L
L
R
EXAMPLES:
39-400-10CP
39-400-10AZ
SIZE
4”
4”
5”
5”
PART NO.
39-400-11
39P-400-11
39-500-11
39P-500-11
L
7 1/2”
7 1/2”
9”
9”
ADD AZ FOR ALUMINIZED EXAMPLES:
39-400-11CP
39-400-11AZ
tilt cab connector
with 90° elbows
BALL TYPE BOTTOM
R
R H
R
H
R
H
H
R
H
R
H
R
H
R
L
L
L
L
STYLE “P” INDICATES PLAIN (O.D.) END
L
STANDARD RADIUS 90° ELBOW
SIZE
4”
4”
5”
5”
PART NO.
39-401-10
39P-401-10
39-501-10
39P-501-10
ADD AZ FOR ALUMINIZED 61
L
111/2”
111/2”
14”
14”
H
121/4”
121/4”
161/2”
161/2”
EXAMPLES:
39-401-10CP
39-401-10AZ
L
L
L
SHORT RADIUS 90° ELBOW
SIZE
4”
4”
5”
5”
PART NO.
39-401-11
39P-401-11
39-501-11
39P-501-11
ADD AZ FOR ALUMINIZED L
71/2”
71/2”
9”
9”
H
81/4”
81/4”
111/2”
111/2”
EXAMPLES:
39-401-11CP
39-401-11AZ
H
V-BAND MANIFOLD CLAMPS
STAINLESS STEEL V-BAND CLAMPS
FOR USE WITH FLANGES
APEX
TUBE
SIZE
H
40
O
NOM.
DIA.
TUBE DYNAFLEX
SIZE PART NO.
2 1/5”
40-220S
3”
40-300-1S
3”
40-300S
3”
41-300S
3”
41-300-1S
3/8
3 ”
41-338S
3 1/2”
40-350S
3 1/2”
40-350-1S
3 1/2”
40-350-2S
1/2
3 ”
40-350-3S
4”
40-400-2S
4”
40-400S
4”
40-400-1S
4”
41-400S
41/2”
41-450S
5”
40-500S
5”
41-500S
5”
40-500-1S
6”
40-600S
4” *
41-400-1S
5” *
40-500-2S
USED ON
manifold or TURBOCHARGER
Detroit --- 8.2 Liter
FORD MOTOR
Detroit Diesel --- 6V71, 6V53, 6V92, 8V92 Cummins --- V55, V903
Cummins (Cross Over Pipe) --- V903
GMC / Detroit --- 8.2 N
FORD MOTOR Detroit Diesel --- 8V92, 4-53, 8V71 Caterpillar Tractor --- 3208T Cummins Manifold --- V T-555
GMC Diesel Detroit Diesel Cummins L10 Engine
Detroit Diesel --- 6-71, 12V 71 MACK
Schwitzer Turbo --- 4L F
Airesearch Turbo --- T E0699
Airesearch Turbo --- T1899, T H08A64
Cummins Turbo --- V150, V T50 Caterpillar Turbo Detroit Diesel Cummins V T A903
Detroit 8.2T / GMC TRUCK FORD MOTOR
Cummins (51/2” I.D.)
O E M
PART NO.
APEX
8920206
.207
D9HT5C210-D A
.425
D9H Z5A231-J
5137620
.207
183670
.400
3007219
.400
.239
2069773
E0HT5A281-B A
5137619
.207
IW5455.400
.400
102408
.400
2032896
.262
5103434
115774
.406
5138363
.207
11M E29
.181
154977
.156
48R U2341 Mack
5132650 D.D.-GMC .262
185917
.400
5L7631.262
5.65
5148101
.280
48R N19326 Mack
3016306
.400
2058726
.158
E O H T-5A281-D A
201989
.262
NOM
DIA
2.88
3.87
H
.27
.31
3.82
3.88
3.88
4.06
.28
.28
.28
.29
4.50
4.19
4.25
4.12
.28
.28
.28
.14
4.75
4.81
4.94
4.61
.28
.28
.28
.10
5.25
5.88
.14
5.92
.14
.28
6.88
4.75
.30
.31
5.30
.14
.30
* New additions
62
FLARED FLANGES
FOR MANIFOLD CONNECTION
L
D
O.D.
style 42P
standard tube o.d. flange
FLARE
20°
PART NO.
42P-300
42H P-300
42P-350
42P-400
42P-500
42P-500-1
42P-600
O.D.
3”
3”
31/2”
4”
5”
5”
6”
D
31/2”
31/2”
4”
45/8”
53/4”
51/2”
D
63/4”
D
EXAMPLES:
ADD AZ FOR ALUMINIZED (3” - 5” ONLY) 42P-400AZ
42P-400S
L
31/2”
31/2”
31/2”
31/2”
3”
5”
3”
GAUGE
USED ON
.063
DIESEL MANIFOLD
DETROIT DIESEL L .083
.063
CAT 3208-T L
.063
D D 8.2T .063
T-50 Turbo
.063
Cummins
.063 O.D.DIESEL MANIFOLD
USE V-CLAMP
40-300S
40-300S
40-350-1S
41-400-1S
40-500S
41-500S
I.D.
FLARED FLANGES
FOR MANIFOLD CONNECTION
L
D
I.D.
style 42
standard tube I.d. flange
FLARE
20°
20°
PART NO.
42-300
42-350
42-400
42-500
42-600
42H -300
42L-300
42L-350
42L-400
42H L-300
i.D.
3”
31/2”
4”
5”
6”
3”
3”
31/2”
4”
3”
D
3 5/8”
41/4”
45/8”
53/4”
63/4”
3 5/8”
3 5/8”
41/4”
45/8”
3 5/8”
EXAMPLES:
ADD AZ FOR ALUMINIZED (3” - 5” ONLY) 42-500AZ
42-500S
63
L
11/2”
11/2”
11/2”
3”
3”
11/2”
3”
3”
3”
3”
GAUGE
.063
.063
.063
.063
.063
.083
.063
.063
.063
.083
USED ON
DIESEL MANIFOLD
DIESEL MANIFOLD DIESEL MANIFOLD
DIESEL MANIFOLD
DIESEL MANIFOLD
DIESEL MANIFOLD USE V-CLAMP
40-300S
40-350S
41-400-1S
40-500S
40-300S
40-300S
40-350S
40-400S
40-300S
FLARED FLANGES
5"
4"
4"
style 42-4050
T-50 Turbo
adaptor
5"
L
L CARBON STEEL
STANDARD MATERIAL
FLARE
20°
PART NO.
42P-4050
O.D.
4” - 5”
L
8”
GAUGE
.063
USED ON
T-50 Turbo
USE V-CLAMP
40-500S
EXAMPLES:
42P-4050AZ
42P-4050S
beaded adaptor
connects flexible tubing
L
7/8"
L
7/8"
A
B
A
B
style 42B
beaded adaptor
PART NO.
42B-300
42B-350
42B-400
42B-500
A
B
L
flange Part No.
USE V-CLAMP
3”
31/2”
4”
5”
3.72”
4.22”
4.72”
5.72”
4 3/4”
4 3/4”
4 3/4”
4 3/4”
42R-300
42R-350
42R-400
42R-500
40-400S
40-400S
40-400S
40-400S
ALTERNATE MATERIAL:
ADD AZ FOR ALUMINIZED EXAMPLE:
42B-500AZ
64
Special FLANGES
I.D.
DD I.D.
O.D.
O.D.
LL
FLARE
20°
45°
PART NO.
42R-300
42R-350
42R-400
42R-500
42R-300-45
42R-350-45
42R-400-45
42R-500-45
O.D.
3”
31/2”
4”
5”
3”
31/2”
4”
5”
I.D.
3”
3 1/2”
4”
5”
3”
3 1/2”
4”
5”
ADD AZ FOR ALUMINIZED ADD S FOR STAINLESS STEEL
D
3.70”
4.20”
4.70”
5.70”
3.70”
4.20”
4.70”
5.70”
L
4 3/4”
4 3/4”
4 3/4”
4 3/4”
4 3/4”
4 3/4”
4 3/4”
4 3/4”
USED ON
D D-6V-71
D D-8V-71
DD-6-71 & 12V-71
D D- 5140347
D D- 6V-71
D D- 8V-71
DIESEL MANIFOLD
DIESEL MANIFOLD
USE V-CLAMP
40-300S or 78-300
40-350S or 78-350
40-400S or 78-400
40-500S
40-300S
40-350S
78-400-1
78-500-1
EXAMPLES:
42R-3031AZ
42R-3031-45S
Special FLANGES
LL
I.D.
DD I.D.
I.D.
I.D.
FLARE
20°
PART NO.
42E L-4029
42E-4036
42E-4029
42E-5149
O.D.
4”
4”
4”
5” I.D.
ADD AZ FOR ALUMINIZED ADD S FOR STAINLESS STEEL
65
I.D.
2 7/8”
3 5/8”
2 7/8”
4 7/8”
D
315/16”
41/4”
33/4”
53/4”
EXAMPLES:
42E-4029AZ
42E-4029S
L
31/2”
4 ”
31/4”
3”
USED ON
D D-8.2N
D D-8V-71
C- V-903
T-50 TURBO
USE V-CLAMP
40-400-2S
40-350S
41-300S
40-500S
Manifold Connectors
style 42T
manifold tube
style 42F
manifold flange
5/8” thick
11/16"
11/16"
4"O.D.
4"O.D.
4"
11/16"
4"
41/8"
4"O.D.
PART NO.
42T-400
42F-400
2"
57/8"
41/8"
PART NO.
4"O.D.
57/8"
/8"
572"
TUBE CONNECTOR / TURBO4 / "
4"
57/8"
11/16"
1 8
• QUICK EASY ASSEMBLY
•1 LEAK TIGHT
WELDEND
4 /8" I.D.
O.D.
WELDEND
• NO GASKET REQUIRED
O.D. I.D.
O.D.
2"
style 43E
2"
O.D.
WELDEND
1/ 2 "
2O.D.
21/2"
O.D. I.D.
14D D-1814
DETROIT DIESEL
PART NO. 5101814
WELDEND
O.D. STANDARD MATERIAL CARBON STEEL
O.D. I.D.
FLANGE WELD END
PART NO.
O.D.
41/2" I.D.
5.15" 1 O.D.
"
43E-500 5.15"
5.00” 4 /25.15”
4.52”
1/2"
2
USE
USED ON SIZEO.D.
V-CLAMP
SIZEO.D.
D D-8V-71
41-450S
style 43E L
21/2"
5.15"
5.15"
41/2"
41/2"
SIZEO.D.
FLANGE
PART NO.
43E L-475
43E L-487
43E L-500
SIZEO.D.
USED ON
SIZE
D D-8V-71T
43/4” I.D.
D D-16V-71T
5” O.D.
D D-6V-92T
D D-8V-92T
5” I.D.
D D-16V-92T
USE
V-CLAMP
41-450S
66
TUBE CONNECTOR Stack BREAKER
• LEAK TIGHT
• NO GASKET REQUIRED
3D VIEW
OF 43J-X XX
I.D. I.D.
1 1 / 2" 1 / 2"
1
style 43
flange
style 43
flange
(2 REQUIRED)
I.D.
SIZE
2”
21/2” 3”
31/2” 4” 5” 6” FLANGE
PART NO.
CLAMP
PART NO. 43-200
43-250
43-300
43-350
43-400
43-500
43-600
78-200
78-250
78-300
78-350
78-400-1
78-500-1
78-600-1
ALTERNATE Material:
COMPLETE JOINT P/N
(2 FLANGES & CLAMP)
43J-200
43J-250
43J-300
43J-350
43J-400
43J-500
43J-600
EXAMPLE:
43J-400S
I.D.
SIZE
ORDINANCE CORPS
FLANGE PART NO.
DYNAFLEX
PART NO.
3”
4”
31/2”
31/2”
21/2”
3”
4”
10861736
10932801
11663019-3
11609354-1
11609354-2
11609354-3
11609354-4
43-300M S
43-400M S
43-350 S
43-350 A Z
43-250 A Z
43-300 A Z
43-400 A Z
Type 321 stainless alternate material for 11609354
67
style 78
CLAMP
TUBE CONNECTOR disconnect
• 1/16” Angular Misalignment
• LEAK TIGHT -- NO GASKET
1 1/ 2"
1 1/ 2"
style 42
flange
style 44
flange
style 78
CLAMP
style 44
flange
SIZE
STYLE 44
FLANGE P.N.
STYLE 42
FLANGE P.N.
CLAMP
PART NO. 4” 5” 6” 44-400
44-500
44-600
42-400
42-500
42-600
78-400
78-500
78-600
ALTERNATE Material:
COMPLETE JOINT P/N
(2 FLANGES & CLAMP)
44J-400
44J-500
44J-600
EXAMPLE:
44J-400S
Full Circle Clamps
• Recommended for Use Over Slotted Tubes
• does not Pinch, Bind or Cut
• Reduces Leakage and Noise
• improved Appearance
STANDARD MATERIAL - 11 Gauge CARBON STEEL
one inch wide - zinc plated
SIZE
31/8”
35/8”
41/8”
51/8”
51/2”
6”
61/8”
8”
81/8”
PART NO.
45-312Z
45-362Z
45-412Z
45-512Z
45-562Z
45-600Z
45-612Z
45-800Z
45-812Z
ALTERNATE MATERIAL:
EXAMPLE:
45-412CP
68
heavy duty Round Bolt
Exhaust Hang Clamp
style 47H C
hang clamp curved
style 47H F
hang clamp straight
SIZE
PART NO.
3”
3 1/2”
4”
5”
6”
47H C-300
47H C-350
47H C-400
47H C-500
47H C-600
description
SIZE
PART NO.
3/8”
BOLT
3”
3 1/2”
4”
5”
6”
47H F -300
47H F -350
47H F -400
47H F -500
47H F -600
ADD Z FOR ZiNC PLATE
EXAMPLES:
47H C-500Z
47H C-500CP
ADD Z FOR ZINC PLATE
STRAP CLAMP FOR HANGERS
7/8"
11 GA. STEEL
5/16” BOLT & NUT ADD CP FOR CHROME PLATE
SIZE
2”
21/2”
3”
31/2”
4”
5”
6”
8”
9”
10”
PART NO.
48C-200
48C-250
48C-300
48C-350
48C-400
48C-500
48C-600
48C-800
48C-900
48C-1000
example: 48C-500CP
example: 48C-500Z
STRAP HANGER CLAMP
69
example: 48ch-500cp
example: 48ch-500z
SIZE
2”
21/2”
3”
31/2”
4”
5”
6”
8”
9”
10”
PART NO.
48CH-200
48CH-250
48CH-300
48CH-350
48CH-400
48CH-500
48CH-600
48CH-800
48CH-900
48CH-1000
description
3/8”
BOLT
EXAMPLES:
47H F-500Z
47H F-500CP
mounting bracket clamp
t
5/16" bOlt
g
b
d
APPLICATIONS:
AIR CLEANERS
OIL CLEANERS
OIL COOLERS
MUFFLERS
All bracket assemblies are spot welded in 10 places for maximum
strength and rigidity
3/8" HOle
SIZE
4”
41/2”
5”
51/2”
6”
61/2”
7”
73/4”
8”
81/2”
9”
93/4”
10”
103/16”
1113/16”
12”
13”
14”
15”
16”
PART NO.
48M-400
48M-450
48M-500
48M-550
48M-600
48M-650
48M-700
48M-775
48M-800
48M-850
48M-900
48M-975
48M-1000
48M-1019
48M-1181
48M-1200
48M-1300
48M-1400
48M-1500
48M-1600
T
.074
.074
.074
.074
.074
.074
.074
.090
.090
.090
.090
.090
.090
.090
.090
.090
.090
.090
.090
.090
B
7/8”
7/8”
7/8”
7/8”
7/8”
7/8”
7/8”
11/4”
11/4”
11/4”
11/4”
11/4”
11/4”
11/4”
11/4”
11/4”
11/4”
11/4”
11/4”
11/4”
D
2.25
2.50
3.50
3.00
3.00
3.75
4.50
3.50
4.25
4.25
4.50
5.00
5.00
5.00
5.00
5.00
6.00
6.00
6.25
6.50
G
.50
.50
.50
.50
.50
.50
.50
.48
.88
.88
.88
.88
.88
.88
.88
.88
.88
1.00
1.00
1.00
example: 48M-1019CP
example: 48M-1019Z
heavy duty Exhaust ClampS
Open and Welded Saddles
welded saddle
flat u-bolt
SIZEPART NO.
3”
3 1/2”
4”
5”
6”
7”
8”
46-300
46-350
46-400
46-500
46-600
46-700A
46-800A
description
3/8”
U-BOLT
ALTERNATE MATERIALS:EXAMPLES:
ADD Z FOR Zinc PLATE
46-500Z
ADD CP FOR CHROME PLATE 46-500CP
A INDICATES ALUM. SADDLE ON 7” & 8”
open saddle
round u-bolt
SIZEPART NO.
1 1/2”
1 3/4”
2”
2 1/4”
2 1/2”
2 3/4”
47-150
47-175
47-200
47-225
47-250
47-275
description
5/16”
U-BOLT
47-200Z
70
Open and Welded Saddles
welded saddle
round u-bolt
SIZEPART NO.
3”
3 1/2”
4”
5”
5 1/2”
6”
description
47-300
47-350
47-400
47-500
47-550
47-600
3/8”
U-BOLT
47-500Z
guillotine Saddles
SIZEPART NO.
3”
3 1/2”
4”
5”
5 1/2”
6”
46G-300
46G-350
46G-400
46G-500
46G-550
46G-600
description
3/8”
U-BOLT
46G-500Z
ADD CP FOR CHROME PLATE 46G-500CP
flat u-bolt
ROUND u-bolt
71
SIZEPART NO.
1 1/2”
1 5/8”
1 3/4”
2”
2 1/4”
2 1/2”
3”
3 1/2”
4”
4 1/2”
5”
5 1/2”
6”
47G-150
47G-162
47G-175
47G-200
47G-225
47G-250
47G-300
47G-350
47G-400
47G-450
47G-500
47G-550
47G-600
description
5/16”
U-BOLT
3/8”
U-BOLT
47G-500Z
ADD CP FOR CHROME PLATE 47G-500CP
easy seal® flatband Exhaust Clamp
economical design
SIZEPART NO.
3”
3 1/2”
4”
4 1/2”
5”
5”
50E Z-300S
50E Z-350S
50E Z-400S
50E Z-450S
50E Z-500S
50E Z-600S
PacKaged One per box
10 boxes per carton
tru-seal clamp
flat stainless steel strap
for use over flexible metal hose
Flat Clamp
U.S. Patent NO. 3,944,265
SIZEPART NO.
2”
50T S-200
1
2 /4”
50T S-225
1
2 /2”
50T S-250
2 3/4”
50T S-275
3”
50T S-300
• Seals - muffler inlets, outlets, elbow joints and other system connections.
•Flat, wide band conforms to shape of pipe for smooth, leak-tight fit.
• Durable stainless steel, maintenance-
free.
• Prevents exhaust pipe distortion and breakage.
•Use for truck, bus, construction, indus-
trial and agricultural machinery exhaust systems.
SIZEPART NO.
3 1/4”
50T S-325
3 1/2”
50T S-350
4”
50T S-400
5”
50T S-500
6”
50T S-600
8”
50TS-800
ADD SP FOR polished stainless 50TS-500SP
INDIVIDUAL BOXED FLAT
TEN BOXES PER CARTON
72
lap joint exhaust clamp
riGid to flex
•Unique 360 degree seal reduces joint failure and closes gaps which emit gases and noise.
• Rust resistant. Designed for life of vehicle in aluminized or stainless steel with plated hardware
• Causes no damaging distortion
to pipe or flex hose.
• Preformed for accurate I.D.- O.D. installation.
•Ease of installation minimizes problems, errors and costs. No further sealants or welds are necessary.
Open, Slip-On design allows
single-handed installation
without separating pipes or
exhaust members.
U.S. Patent # 3,905,623 and
Foreign Patients Pending.
“TorcTite” is the Trade Mark of
Torca Products, Inc.
The Original, O E M Wide-Band Clamp.
clamps are aluminized STEEL and
PacKaged ONE per carton
SIZEPART NO.
2”
2 1/2”
2 3/4”
3”
3 1/4”
3 1/2”
4”
5”
50TQ-200A Z
50TQ-250A Z
50TQ-275A Z
50TQ-300A Z
50TQ-325A Z
50TQ-350A Z
50TQ-400A Z
50TQ-500A Z
description
7/16”
BOLT
ADD S FOR stainless steel
50TQ-400S
ADD SP FOR polished stainless 50TQ-400SP
73
flexible mEtal hose
AVAILABLE IN 5 FOOT OR 10 FOOT LENGTHS, OR 25 FOOT ROLLS
FLEXIBLE Galvanized .015-.017
SIZEPART NO.BEND “R”
11/4”
51F-125
6”
51F-150
7”
11/2”
2”
51F-200
8”
21/2”
51F-250
10”
3”
51F-300
13”
51F-350
16”
31/2”
4”
51F-400
18”
5”
51F-500
22”
6”
51F-600
26”
STANDARD Weight Galvanized .018 -.022
51-125
61/2”
11/4”
1
1 /2”
51-150
71/2”
3
51-175
81/2”
1 /4”
2”
51-200
91/2”
1
51-225
11”
2 /4”
21/2”
51-250
12”
3”
51-300
151/2”
1
51-350
18”
3 /2”
4”
51-400
20”
5”
51-500
241/2”
6”
51-600
29”
STAINLESS STEEL TYPE 302 .018-.022
2”
53-200
91/2”
1
2 /4”
53-225
91/2”
1
2 /2”
53-250
12”
3”
53-300
151/2”
1
3 /2”
53-350
18”
4”
53-400
20”
5”
53-500
241/2”
6”
53-600
29”
8”
53-800
35”
10”
53-1000
40”
12”
53-1200
48”
EXTRA HEAVY Galvanized .023 -.027
11/2”
52-150
71/2”
2”
52-200
91/2”
52-225
11”
21/4”
21/2”
52-250
141/2”
3”
52-300
161/2”
1
3 /2”
52-350
19”
4”
52-400
22”
5”
52-500
251/2”
6”
52-600
30”
8”
52-800
281/2”
10”
52-1000
45”
12”52-1200
54”
ALTERNATE MATERIAL:EXAMPLE:
ADD SP FOR POLISHED STAINLESS
53-500SP
74
flex SIX PACKS
CUT TO SIZE, DEBURRED AND SPOT WELDED
•NEW, LOWER PRICING
•EASY STORAGE
•PROFESSIONALLY FINISHED PRODUCT
• SIX CONVENIENT PRE-CUT LENGTHS
MEDIUM WALL
LIGHT WALL
SIZELENGTH
SIX PACK
PART NO.
•Light, Medium & Heavy Wall
And Stainless Steel Available
HEAVY WALL
STAINLESS STEEL WALL
SIX PACK
SIZELENGTH
PART NO.
SIZELENGTH
4”
51-400-12-6
4”
12”
52-400-12-6
12”
SIX PACK
PART NO.
SIZELENGTH
4”
12”
51F-400-12-6
4”
18”
51F-400-18-6
4”
18”
51-400-18-6
4”
18”
52-400-18-6
4”
18”
53-400-18-6
4”
24”
51F-400-24-6
4”
24”
51-400-24-6
4”
24”
52-400-24-6
4”
24”
53-400-24-6
4”
36”
51F-400-36-6
4”
36”
51-400-36-6
4”
36”
52-400-36-6
4”
36”
53-400-36-6
5”
12”
51F-500-12-6
5”
12”
51-500-12-6
5”
12”
52-500-12-6
5”
12”
53-500-12-6
5”
18”
51F-500-18-6
5”
18”
51-500-18-6
5”
18”
52-500-18-6
5”
18”
53-500-18-6
5”
24”
51F-500-24-6
5”
24”
51-500-24-6
5”
24”
52-500-24-6
5”
24”
53-500-24-6
5”
36”
51F-500-36-6
5”
36”
51-500-36-6
5”
36”
52-500-36-6
5”
36”
53-500-36-6
5”
48”
51F-500-48-6
5”
48”
51-500-48-6
5”
48”
52-500-48-6
5”
48”
53-500-48-6
5”
60”
51F-500-60-6
5”
60”
51-500-60-6
5”
60”
52-500-60-6
5”
60”
53-500-60-6
BALL JOINTS
• 10° ANGULARITY
• 360° ROTATION
12”
DOUBLE BALL JOINT
• 10° ANGULARITY
• 360° ROTATION
• 2” OFF SET
I.d.I.d.
I.d.I.d.
l l
l l
4”
SIX PACK
PART NO.
SIZE
3”
31/2”
4”
5”
PART NO.
56-300Z
56-350Z
56-400Z
56-500Z
L
6 1/2”
6 1/2”
71/4”
8”
Weld
Weld
l
SIZE
3” 31/2”
l 4” 5” PART NO.
56D-300Z
56D-350Z
56D-400Z
56D-500Z
L
13”
13”
141/2”
16”
ALL BALL JOINTS ARE ZINC PLATED
75
Outlet
Outlet
I.d.I.d.
Inlet
Inlet
I.d.I.d.
53-400-12-6
I.d.
I.d.
DOUBLE BALL JOINT
l
WITH SLIP JOINT FEATURE
ALLOWING LATERAL MOVEMENT
l
l
l
Weld
Outlet
I.d.
Inlet
I.d.
Outlet
I.d.
Inlet
I.d.
SIZE
3”
31/2”
4”
5”
PART NO.
56D A-300Z
56D A-350Z
56D A-400Z
56D A-500Z
LENGTH
14” to 16”
14” to 16”
16” to 18”
16” to 18”
Lubricating
Double ball joint with
slip joint feature allowing universal movement
l
• 10° Angularity
Inlet
I.d.
Outlet
I.d.
gRapHIte
SealS
3”
31/2”
4”
5”
56D G A-300-Z
56D G A-350-Z
56D G A-400-Z
56D G A-500-Z
14”
14”
16”
16”
to
to
to
to
360° Rotation
•
2” Off-set
•
2” Axial
gRapHIte
SealS
SlIp
JOInt
featuRe
sizePART NO.L
•
16”
16”
18”
18”
The Double Ball Joint feature three graphite Seals
to lubricate the moving parts. The seals are heat
resistant to 1700°F. The Slip Joint feature insures
lateral movement, with the ball ends providing a
±10° angularity movement.
76
Lubricating ball joint
10° Angularity • 360° Rotation
l
Outlet
I.d.
Inlet
I.d.
sizePART NO.L
3”
31/2”
4”
5”
56G-300-Z
56G-350-Z
56G-400-Z
56G-500-Z
6 1/2”
6 1/2”
71/4”
8”
sizePART NO.L
The Single Lubricating Ball Joints feature a
Graphite Seal which is heat resistant to 1200°F,
and provides self-lubrication to keep the joint
flexible and free moving. The ±10° angularity
remains flexible throughout its service life.
I.d.
O.d.
O.d.
I.d.
Outlet
I.d.
CLASS 125#
3”
31/2”
56V-300
56V-350
6 1/2”
6 1/2”
Clamp may be tightened to compensate for
gasket wear and permits quick disconnection of
exhaust system for engine service. No special
tools required.
Carbon Steel
Bolted Plate -- Flange
thick SIZEPART ID
O DB.C.
HOLENO. OF
SIZE HOLES
l NO.
7/8” 8
1/2”
5” 59F-500-125
5 1/16”
10”
81/2”
7/8” 8
1/2”
6” 59F-600-125
6 1/16”
11”
91/2”
1
1
1
3
7/8” 8
/2”
8” 59F-800-125
8 /8”
13 /2” 11 /4”
1
1
3
1”
12
/2”
10” 59F-1000-125
10 /8”
16”
14 /4”
1
1
1”
12
/2”
12” 59F-1200-125
12 /8”
19”
17”
Inlet
I.d.
stainless Steel bellows
expansion
joint with* bolted Flanges
l
b
l
I.d.
gRapHIte
SealS b
SlIp
JOInt
featuRe
I.d.
BOLTED FLANGE ENDS --- STEEL
.020 BELLOWS --- STAINLESS STEEL
77
gRapHIte
SealS
SIZE
PART NO.
ID
O D
5”
59-500-125S
5”
10”
59-600-125S
6”
11”
O.d. 6”
8”
59-800-125S
8”
131/2”
10”
59-1000-125S
10” 16”
12”
59-1200-125S
12” 19”
O.d.
PART NO. - 2 = TWO PLY BELLOWS (.012)
EXAMPLE: 59-500-125-2S
B
6”
6”
6”
6”
6”
L
10”
10”
10”
10”
10”
STAINLESS STEEL BELLOWS
EXPANSION JOINT
l
b
a
SIZE
5”
6”
8”
10”
12”
d
PART NO.
60W-500S
60W-600S
60W-800S
60W-1000S
60W-1200S
A
6”
7”
9”
11”
13”
B
6”
6”
6”
6”
6”
D
5”
6”
8”
10”
12”
L
10”
10”
10”
10”
10”
Part No. - 2 = Two Ply Bellows (.012)
EXAMPLE: 60W-600-2S
WELD ENDS --- STEEL
.020 BELLOWS --- STAINLESS STEEL
l
3"
I.d.
SIZE
2”
21/2”
3”
31/2”
4”
5”
6”
8”
PART NO.
SINGLE PLY
60H-200S
60H-250S
60H-300S
60H-350S
60H-400S
60H-500S
60H-600S
2"
60H-800S
PART NO.
DOUBLE PLY
L
60H-200-2S
51/2”
60H-250-2S
51/2”
60H-300-2S
6”
60H-350-2S
6”
60H-400-2S
61/2”
l
60H-500-2S
7”
60H-600-2S 2" 7”
6"
60H-800-2S
7”
USE CLAMP
PART NO *
50T S-200
50T S-250
50T S-300
50T S-350
50T S-400
50T S-500
50T S-600
50T S-800
leak proof exhaust bellows for
general purpose applications and for
critical applications
•
•
•
•
AVAILABLE IN MULTI-PLY CONSTRUCTION
DIAMETERS UP TO 32 INCHES
AVAILABLE WITH VARIOUS END STYLES
CAPABLE OF ANGULAR + 10°,
AXIAL 1/4” AND OFF SET 1/8”
EXAMPLE:
ADD “P” FOR BELLOWS WITH PLAIN ENDS
60H P -500S
* ORDER CLAMPS SEPARATELY
78
I.d.
l
2"
2"
6"
SIZE
2”
21/2”
3”
31/2”
4”
5”
6”
8”
PART NO.
PART NO.
(SINGLE PLY) (DOUBLE PLY)
60L-200S
60L-200-2S
60L-250S
60L-250-2S
60L-300S
60L-300-2S
60L-350S
60L-350-2S
60L-400S
60L-400-2S
60L-500S
60L-500-2S
60L-600S
60L-600-2S
60L-800S
60L-800-2S
L
10”
10”
10”
10”
10”
10”
10”
10”
USE CLAMP
PART NO *
50T S-200
50T S-250
50T S-300
50T S-350
50T S-400
50T S-500
50T S-600
50T S-800
EXAMPLE:
ADD “P” FOR BELLOWS WITH PLAIN ENDS
60 P L-500S
* ORDER CLAMPS SEPARATELY, (SEE PAGE 62)
master flex JOINT
Reinforced With STAINLESS FLEX LINER
ClaMp tO pROvIde
90° ROtatIOn
vIbRatIOn
daMpenIng RIngS
fOR IMpROved lIfe
vIbRatIOn
daMpenIng gaSKetS
WELDED TUBE ENDS ARE
CARBON STEEL
2 PLY STAINLESS
STEEL BELLOWS
MOTION CAPABILITYB = 3”B = 6”
± .3
± .6
AXIAL =
OR
Angular
± 15°
± 30°
OR
± .12
± .25
LATERAL OFFSET
TORSIONAL--ROTATION
± 30°
± 60°
MultI gauge,
2 plY COnStRuCtIOn
fOR InCReaSed lIfe
HIgH MOtIOn
CapabIlItYSee CHaRt
SIZE
2”
21/2”
3”
31/2”
4”
5”
6”
PART NO.
61P-200S
61P-250S
61P-300S
61P-350S
61P-400S
61P-500S
61P-600S
B
3”
3”
3”
3”
3”
3”
3”
Plain
L
15”
15”
15”
15”
15”
15”
15”
End
PART NO.
61PL-200S
61PL-250S
61PL-300S
61PL-350S
61PL-400S
61PL-500S
61PL-600S
B
6”
6”
6”
6”
6”
6”
6”
L
18”
18”
18”
18”
18”
18”
18”
PART NO.
61-200S
61-250S
61-300S
61-350S
61-400S
61-500S
61-600S
slotted End
B
L
PART NO.
3” 15” 61L-200S
3” 15” 61L-250S
3” 15” 61L-300S
3” 15” 61L-350S
3” 15” 61L-400S
3” 15” 61L-500S
3” 15” 61L-600S
ADD “SS” FOR STAINLESS steel construction throughout
79
B
6”
6”
6”
6”
6”
6”
6”
L
18”
18”
18”
18”
18”
18”
18”
l"
bellows with liner
l"
l" 3"
ends are carbon steel
3"
3"
sizePART NO.L
I.d
I.d
I.d
Bellow is Multi Gauge 2 Ply Construction for
Increased Life. For Use Where High Velocity
Flow or Heat is Encountered.
2”
21/2”
3”
31/2”
4”
5”
6”
63-200S
63-250S
63-300S
63-350S
63-400S
63-500S
63-600S
8”
8”
8”
91/2”
10”
101/2”
11”
Example:
Add “P” for Plain ends
63P-500S
ADD “SS” FOR ALL STAINLESS 63P-500SS
l" with internal flex tube liner
bellows
l"
l" 3"
3"
3"
sizePART NO.L
I.d
I.d
I.d
Increased Life. For Use Where extreme heat, flow,
vibration, or pressure cycling is Encountered.
ideal for turbo conveyor systems
2”
21/2”
3”
31/2”
4”
5”
6”
64-200S
64-250S
64-300S
64-350S
64-400S
64-500S
64-600S
7”
7”
7”
8”
8”
8”
8”
Example:
64P-500S
bellows witH turbo or manifold flange
l"
l"
l" 3"
sizePART NO.L
3"
3"
I.d
I.d
I.d
Increased Life. For mounting direct to tuRbocharger or manifold.
2”
21/2”
3”
31/2”
4”
5”
6”
65-200S
65-250S
65-300S
65-350S
65-400S
65-500S
65-600S
7”
7”
7”
8”
8”
8”
8”
Example:
64P-500S
80
BELLOWS JOINT
STANDARD MATERIAL: STAINLESS STEEL FLEX WITH CARBON STEEL ENDS
features:
angular adjustment and
10° thermal expansion contraction
low cost bellowS connector
l
2"
14"
2"
applications:
• power plants
• stationary engines
• generator sets
.020 StaInleSS Steel
tYpe 321, One plY
.065 CaRbOn
Steel endS
PART NO.PART NO.PART NO.
ONE END PLAINBOTH ENDS BOTH ENDS
SIZE 1 END EXP. & SlottedPLAINEXP. & SLOTTEDLENGTH
11/2”
66-150-12S
66P-150-12S
66D-150-12S
12”
13/4”
66-175-12S
66P-175-12S
66D-175-12S
12”
66-200-6S
66P-200-6S
66D-200-6S
6”
2”
66-200-8S
66P-200-8S
66D-200-8S
8”
66-200-12S
66P-200-12S
66D-200-12S
12”
66-250-8S
66P-250-8S
66D-250-8S
8”
21/2”
66-250-12S
66P-250-12S
66D-250-12S
12”
66-250-18S
66P-250-18S
66D-250-18S
18”
66-300-8S
66P-300-8S
66D-300-8S
8”
66-300-12S
66P-300-12S
66D-300-12S
12”
3”
66-300-18S
66P-300-18S
66D-300-18S
18”
66-300-24S
66P-300-24S
66D-300-24S
24”
66-350-12S
66P-350-12S
66D-350-12S
12”
66-350-18S
66P-350-18S
66D-350-18S
18”
31/2”
66-350-24S
66P-350-24S
66D-350-24S
24”
66-400-12S
66P-400-12S
66D-400-12S
12”
4”
66-400-18S
66P-400-18S
66D-400-18S
18”
66-400-24S
66P-400-24S
66D-400-24S
24”
66-500-12S
66P-500-12S
66D-500-12S
12”
5”
66-500-18S
66P-500-18S
66D-500-18S
18”
66-500-24S
66P-500-24S
66D-500-24S
24”
6”
66-600-18S
66P-600-18S
66D-600-18S
18”
66-600-24S
66P-600-24S
66D-600-24S
24”
8”
66-800-18S
66P-800-18S
66D-800-18S
18”
66-800-24S
66P-800-24S
66D-800-24S
24”
81
expand-o-flex joints
leaK-pROOf HIgH teMp gaSKet
nO Metal-tO-Metal COntaCt
O
In and
±6°
fleXIb
/2"
ut ± 1
GasKeted Flexible Exhaust Connector
Minimize Exhaust Leakage
---Excessive Down Time
--- WILL NOT UNRAVEL & CRACK LIKE FLEXIBLE METAL HOSE.
IlItY
a
clamp-on joint
a
style 72
weld on joint
style 71
tubeweld-onclamp-on
sizePART NO.APART NO.
± 6° Angularity
± 1/2” Axial In And Out Movement
360° Rotation
2”
21/2”
3”
31/2”
4”
5”
6”
71-200C
71-250C
71-300C
71-350C
71-400C
71-500C
71-600C
3.38
3.50
3.88
3.88
4.75
4.75
4.75
72-200C
72-250C
72-300C
72-350C
72-400C
72-500C
72-600C
Additional MaterialS:Example:
Add Z for zinc plated
71-500Z
Add S for stainless steel
71-500S
double flex joint
a
style 73
a
no welding required
tubecarbon steel
sizePART NO.A
± 12° Angularity
± 1” Axial In And Out Movement
360° Rotation
2”
21/2”
3”
31/2”
4”
5”
6”
73-200C
73-250C
73-300C
73-350C
73-400C
73-500C
73-600C
4.25”
4.50”
4.50”
4.50”
5.88”
5.88”
5.88”
73-500Z
Add S for stainless steel 73-500S
82
expand-o-flex joints
Style 74 and 75 Turbo-Flex Joints
for direct attachment to manifold or turbo
a
a
a
tubecarbon steel
sizePART NO.A
3”
31/2”
4”
5”
4”
41/2”
74-300C
74-350C
74-400C
74-500C
75-400C
75-500C
engine
used on
3 1/4” 6V53, V903
3 1/4” 8V71
4”
6V71, 12V71
4”T50, 4LF
4”T E 0699
4”T 18A40
74-500Z
Add S for stainless steel
74-500S
8"
R K flex JOINT
8"
8"
Style 76-400C
4 inch diameter flex connector
featuring rolled formed flanges.
size
dynaflexmack truck
diameterPART NO.LPART NO.
4”
76-400C*
*14M K-1696
8”
4ME A21696
8"
1"
1"
1"
8"
6"
8"
6"
6"
1"
1"
1"
flex joint
with stainless steel flex
4 inch diameter flex connector featuring
20° flared flanges with flex.
4"
4"
4"
size
dynaflexmack truck
4”
76F T-400S*
*14M K-1408
83
8”
4ME 21408
R K flex joint
with stainless steel bellows
this is a bellows style joint with:
1. rolled formed flanges
2. multi gauge 2-ply construction bellows for increased life.
8"8"
size
dynaflexmack truck
4”
76B-400S
8”
4ME 21696
R K flex joint
with stainless steel bellows
1"1"
4"4"
8"8"
6"6"
1"1"
this is a bellows style joint with:
1.20° flared flanges (Heavy Wall)
2.multi gauge 2-ply construction
bellows for increased life.
size
dynaflexmack truck
4”
76F-400S*
8”
4ME 21409
*14M K-1409
84
replacement parts
Gasket
Features:
High Temperatures Heat
Resistant Compound
TUBEPART
sizeNUMBER
2”
77-200
21/2”
77-250
3”
77-300
77-350
31/2”
4”
77-400
5”
77-500
6”
77-600
REPLACEMENT GASKET FOR EXPAND-O-FLEX JOINTS ON PGS. 82 & 83.
retainer
Features:
Stronger Gasket
Protection for Better
Sealing Against Exhaust
Leakage
TUBEPART
sizeNUMBER
2”
79-200C
79-250C
21/2”
3”
79-300C
31/2”
79-350C
4”
79-400C
5”
79-500C
6”
79-600C
79-500Z
85
REPLACEMENT RETAINER FOR EXPAND-O-FLEX JOINTS ON PGS. 82 & 83.
single piece v-clamp
with hinge
TUBEPART
sizeNUMBER
2”
78-200
78-250
21/2”
3”
78-300
78-350
31/2”
4”
78-400-1
78-450-1
4 1/2”
5”
78-500-1
78-550-1
51/2”
6”
78-600-1
apex
.207
78-350Z
OPEN EAR STYLE
REPLACEMENT CLAMPS FOR EXPAND-O-FLEX JOINTS ON PGS. 82 & 83.
TUBEPART
sizeNUMBER
4”
78-400
5”
78-500
6”
78-600
apex
.400
78-500Z
closed ear style
REPLACEMENT CLAMPS FOR EXPAND-O-FLEX JOINTS ON PGS. 82 & 83.
86
180° STACK GUARD ASSEMBLY
1. FOUR STYLES AVAILABLE
2. MOUNTING CLAMPS INCLUDED WITH GUARD
3.GUARD MOUNTS TO THE STACK
FOUR STYLES OF GUARDS ARE AVAILABLE
VENDORDESCRIPTION
STYLE
KENWORTH . . . . . . . . . . . . . . ROUND HOLES . . . . . . . . . . . . . . . . . R
StYle "e"
PETERBILT . . . . . . . . . . . . . . .
VERTICAL SLOTS . . . . . . . . . . . . . . . . E
FREIGHTLINER . . . . . . . . . . . HORIZONTAL SLOTS . . . . . . . . . . . . . F
SPECIAL . . . . . . . . . . . . . . . . . NO HOLES . . . . . . . . . . . . . . . . . . . . . . N
StYle "e"
45"
4”
5”
6”
7”
8”
180° STACK GUARD PART NO. 81
ROUND hole Vertical SLOTS HORIZONTALNO HOLES
STACK
STYLE R
STYLE EslotS
STYLE N
finish* length
SIZEPART NO.PART NO.
STYLE FPART NO.
45" P
81R-40048sP 81E-40048s
81R-50048s P 81E-50048sP
81R-60048s P 81E-60048S P
81R-70048s P 81E-70048s P
81R-80048s
P 81E-80048s
P
StYle
"R"
81F-40048s P
81F-50048s P
81F-60048S P
81F-70048s P
81F-80048s P
stainless
81n-40048s P
polish
81N-50048s P stainless
polish
81N-60048SP stainless
polish
81N-70048S P stainless
polish
stainless
81N-80048S P polish
Additional MaterialS:Examples:
Add C for carbon steel
81E-50048C
Add cP for chrome plate
81E-50048C P
StYle "R"
360° STACK GUARD ASSEMBLY
StYle "e"
StYle "e"
3.GUARD MOUNTS TO THE STACK
45" ARE AVAILABLE
FOUR STYLES OF GUARDS
VENDORDESCRIPTION
STYLE
PETERBILT . . . . . . . . . . . . . . . VERTICAL SLOTS . . . . . . . . . . . . . . . . E
4”
5”
6”
7”
8”
45"
StYle "R"
360° STACK GUARD PART NO. 82
ROUND hole Vertical SLOTS HORIZONTALNO HOLES
STACK
STYLE R
STYLE Eslot
STYLE N
finish* length
SIZEPART NO.PART NO.
STYLE FPART NO.
82R-40048S P
82R-50048S P
82R-60048S P
82R-70048S P
82R-80048S P
82E-40048S P
82E-50048S P
82E-60048S P
82E-70048S P
82E-80048S P
82F-40048S P
82F-50048S P
82F-60048S P
82F-70048S P
82F-80048S P
stainless
82n-40048S
StYleP
"R"
polish
polish
polish
polish
82N-80048SP stainless
polish
82E-50048C
Add CP for CHROME PLATE 82E-50048C P
87
48”
48”
48”
48”
48”
48”
48”
48”
48”
48”
360° muffler GUARD ASSEMBLY
3.GUARD MOUNTS TO A 5” Tube
StYle "e"
StYle "e"
465/8"
VENDORDESCRIPTION
STYLE
41"
HORIZONTAL SLOTS . . . . . . . . . . . . . F
FREIGHTLINER . . . . . . . . . . .
360° muffler GUARD PART NO. 82
StYle
"R" SLOTS HORIZONTALNO HOLES
Muffler ROUND hole
vertical
STYLE EslotS
STYLE N
body
STYLE R
finish* length
dia.PART NO.PART NO.
STYLE FPART NO.
stainless
9”
82R-90048S P 82E-90048S P 82F-90048S P 82n-90048S P
polish
101/8” 82R-101248S P 82E-101248S P 82F-101248S P 82N-101248S P stainless
polish
48”
48”
81E-90048C
Add CP for CHROME pLATED
81E-90048C P
StYle "R"
5" tube
180° Muffler GUARD ASSEMBLY
3.GUARD MOUNTS TO THE MUFFLER
StYle "e"
StYle "e"
FOUR STYLES
465/OF
8" GUARDS ARE AVAILABLE
VENDORDESCRIPTION
STYLE
41"
StYle "R"
180° muffler GUARD PART NO. 83
Muffler ROUND hole vertical SLOTS HORIZONTALNO HOLES
STYLE EslotS
STYLE N
body
STYLE R
finish* length
dia.PART NO.PART NO.
STYLE FPART NO.
stainless
9”
83R-90048S P 83E-90048S P 83F-90048S P 83n-90048S P
polish
1
10 /8” 83R-101248S P 83E-101248S P 83F-101248S P 83N-101248S P stainless
polish
81E-90048C StYle "R"
Add SP for CHROME pLATED
81E-90048C P
5" tube
48”
48”
88
270° (3/4) muffler GUARD ASSEMBLY
3.GUARD MOUNTS TO THE MUFFLER
StYle "e"
VENDORDESCRIPTION
STYLE
StYle "R"
41"
270° MUFFLER GUARD PART NO. 84
ROUND hole
vertical SLOTS HORIZONTALNO HOLESmuffler
STYLE R
STYLE Eslot
STYLE N
body
finish length dia.
PART NO.PART NO.
STYLE FPART NO.
stainless
84R-90048S P 84E-90048S P 84F-90048S P 84n-90048S P
polish
84R-1012048S P 84E-1012048SP 84F-1012048S P 84N-1012048S P stainless
polish
48”
48”
84N-90048C
Add SP for CHROME PLATED
84N-90048C P
180° AERODYNAMIC muffler GUARD ASSEMBLY
POLISHED STAINLESS STEEL
• FOUR STYLES AVAILABLE
• AERODYNAMIC DESIGN
• MOUNTING CLAMPS INCLUDED WITH GUARD
• GUARD MOUNTS TO THE Muffler
VENDORDESCRIPTION
STYLE
ROUND hole
180° MUFFLER GUARD PART NO. 83J
vertical SLOTS HORIZONTALNO HOLESmuffler
STYLE Eslot
STYLE N
body
STYLE R
length diameter
PART NO.PART NO.
STYLE FPART NO.
83J R-90048S P 83J E-90048S P 83J F-90048S P 83J n-90048S P
83J R-101248S P 83J E-101248S P 83J F-101248S P 83J N-101248S P
Finish = polished stainless steel
MOUNTING BRACKET CLAMP P.N. 85JC-900-3Z
89
48”
48”
9”
101/8”
9”
101/8”
MUFFLER SHIELD GUARD
MOUNTING CLAMP
MUFFLER SHIELD
STACK CLAMP
PART
size
NO.
4”
5”
6”
9”
101/8”
9”
101/8”
8”
85S C-400-3Z
85S C-500-3Z
85S C-600-3Z
85S C-900-3Z
85S C-1012-3Z
85S C-900-4Z
85S C-1012-4Z
85S C-800-3C P
USED ON
SHIELD NO.
81 & 82
81 & 82
81 & 82
83
83
84
84
80
“-Z” INDICATES zinc plated
“-CP” INDICATES CHROME plated
USED ON 360° MUFFLER GUARD
STACKPART
size
NO.
5”
5”
USED ON
SHIELD NO.
85SW-900-C P
85SW-1012-C P
82
82
Mounting Lugs 3 = --3Z
Mounting Lugs 4 = --4Z
Grab handles
• APPLICATIONS: TRUCKING, MARINE, MEDICAL USES.
• CUSTOM DESIGNS AND LENGTHS AVAILABLE UPON REQUEST.
NOTE: THESE GRAB HANDLES FIT IN ALL SLOTTED AND HOLED MUFFLER GUARDS & STEEL GUARDS.
STYLE 85CM
STYLE 85GH
PART NO.LENGTH
85CM-20SP
20”
85CM-271/2SP
271/2”
85CM-36SP
36”
PART NO.LENGTH
85GH-12SP
12”
85GH-18SP
18”
85GH-24SP
24”
“-SP” INDICATES STAINLESS POLISHED
under carriage resonator for
additional sound control
Reduces exhaust noise by 3 to 6 d
B A when installed in exhaust before
the muffler. Straight through design
does not increase back pressure.
PART NO.
BODY BODY
DIA. LENGTH
87BC-500-145
8”
10”
87BC-500-624
8”
8”
26”
20”
87BC-500-674
90
dynaflex muffler / stacks
87 B C series
•
•
•
•
•
Beautiful Polished Chrome Finish
Interchangeable with all Stacks and Elbows
Low Back Pressure Drop
Great Looking, Streamline Design
Excellent Noise Reduction
TYPICAL EXAMPLES
Muffler/Stack with Peterbilt
68° Bottom 6” to 5” Elbow,
6” Dia Mitered Stack and
180° Muffler Shield.
B
I.D
5 1/2”
Curved Stack tops
the Muffler/Stack. A
6” to 5” Kenworth
bottom elbow and
a Kenworth muffler
shield are all shown.
Muffler/Stack illustrating grab handle
without a muffler
guard and Peterbilt
new style elbow.
40”
51”
New
Freightliner
Muffler guard
surrounds
the Muffler/
Stack with 5”
Freightliner
bottom
elbow.
5 1/2”
A
I.D.
8”
muffler part sizenumber
5”
6”
5” to 6”
87B C-500C P
87B C-600C P
87B C-6050C P
Patent Applied
91
AB
INLET OUTLET
diadia
5”
6”
5”
5”
6”
6”
Muffler/Stack
without a shied
to provide that
10 foot straight
stack look.
Kenworth 6” to
5” elbow on the
bottom.
dynaflex CHROME SHIELDS
87 B C series ACCESSORIES
ALL GUARDS HAVE FOLDED EDGES AND ROUNDED CORNERS.
120° SHIELDS MOUNT TO BODY OF MUFFLER
Style e
peterbilt style
Style r
kenworth style
Style F
freightliner style
Style n
no holes
120° MUFFLER GUARDs- Mounting Clamps Included (85SC-800-3C P)
size
8”
Style e
part number
80E-80036S P
Style R
part number
80R-80036S P
ALTERNATE Material:
Change “S P”
to
“C P”
Style F
part number
80F-80036S P
Style N
part number
80N-80036S P
length
36”
EXAMPLE:
for
CHROME PLATED 80E-80036CP
grab handles
Grab handles mount direct to THE STACK, muffler or to the guards and are polished in high
luster chrome. each handle utilizes a heavy Duty 1” Diameter tube.
Mounts Direct to Chrome
Stack or Chrome Muffler
with Full Body Clamps.
“L”
Mounts to Guard
with Strap Ends.
“L”
3 Piece Construction
3 Piece Construction
Stack / Body Mount GraB Handle
Muffler Guard GraB Handle with Strap Ends
used on
sizePART NO.LENGTH stack size
shield
sizePART NO.LENGTHshield style
5” 85S M-50045C P
45”
81 & 82 STYLE
6” 85S M-60045C P
45”
81 & 82 STYLE
7” 85S M-70045C P
45”
STYLE 81
8” 85S M-80033C P
33”
STYLE 80 for 87BC
5”
6”
7”
8”
85B M-50045C P
85B M-60045C P
85B M-70045C P
85B M-80033C P
45”
45”
45”
33”
5”
6”
7”
8” & 87B C
92
Spark Arrestors
Reduce Fire Hazards
Two Way Performance
Dynaflex Spark Arrestors will remove nearly all dangerous sparks from exhaust gases. This greatly reduces
the fire hazard of internal combustion engines. Fire
causing sparks are moved through centrifugal force created within the spark arrestor. These particles are then
trapped safely within the arrestor for later removal.
Dynaflex Spark Arrestors can be installed either horizontal or vertical. Efficiency in any position is expected
to exceed 95%. C F M ratings are applicable to both
horizontal and vertical positions.
How To Select The Proper Arrestor
If diameter of the spark arrestor is as large as the
exhaust pipe in diameter, restriction usually will be
within acceptable engine limits. However, you should
check exhaust C F M of engine against C F M rating of
spark arrestor. Some applications (eg. turbo charged
engines) may require larger spark arrestors and an
adaptor will be needed to complete installation.
Durability Plus Light Weight
Each unit is constructed of aluminized steel throughout.
Critical internal flanges are heavy gauged for longer service life, while the outer shell is lighter weight to reduce
stress and vibration to the rest of the exhaust system.
Aluminized steel is used to resist heat, corrosive gases,
and to extend service life of arrestor.
F
D
INlET "A" I.D.
"B" OUTlET I.D.
C
SOOT
plUG
E
Style 86
PART
NO.
86-200 86-250 86-300
86-350 86-400 ABCDE F
INLET
OUTLET
BODY
BODY
OVERALL
INLET
DIAMETER
DIAMETER
DIAMETERLENGTHLENGTHLENGTH
2.00
2.50
3.00
3.50
5.00
2.00
2.50
3.00
3.50
5.00
5.62
5.62
6.62
7.62
9.62
6.40
8.46
10.2
12.0
16.0
11.0
12.8
14.9
17.6
24.0
All arrestors exceed U.S. Forestry requirements.
Models are qualified and tested for vertical and horizontal installations by the U.S. Forestry Service.
93
3.4
2.0
2.5
3.0
4.0
RATED
CF M
208
348
555
767
2080
Dynaflex quality performance Mufflers
Testing and Development Program
Dynaflex Mufflers are designed to enable most trucks;
Old --- To meet the 86 d B A Noise Law
New --- To meet the 83 d B A Noise Law
Total vehicle noise is a combination of several factors:
engine exhaust, engine intake, fan, tire and mechanical noise. Since engine exhaust is usually a major
contribution of noise, it is essential to reduce it significantly below the desired total vehicle noise level. For
example: an older truck (pre-1978) to meet a total
vehicle noise level of 86 d B A, it is necessary to reduce
exhaust noise to at least 82 d B A, but preferably to 81 d
B A or below, assuming other noise sources are normal
--- approximately 84 d B A. The lower the exhaust noise
level, the less silencing treatment required for other
noise sources.
Dynaflex has been working closely with manufacturers
to develop mufflers to control diesel engine exhaust
noise. These mufflers have been thoroughly tested.
The result is a select line of mufflers that cover the
great majority of engines and exhaust systems. These
mufflers have been engine tested under dynamometer
load and are within the engine manufacturers restriction
(back pressure) limits while providing the attenuation
needed to meet applicable noise levels for old or new
trucks.
The Correct Muffler
The muffler you need is listed in the following pages
under the make and model of your engine. Engineering
data is directly in line with each suggested muffler part
number.
The applicable Muffler for your needs has
been based on the following noise level guide
Pre-1978 Applications
1978 and later Applications
The Pure Exhaust Noise Levels shown here can be used
as illustrated to select a muffler for an 86 d B (A) noise law.
The Pure Exhaust Noise Levels shown here can be used
as illustrated to select a muffler for an 83 d B (A) noise law.
HigH
83
79
86 TOTAL VEHICLE LIMIT HigH
HigH
Marginal
Pure Exhaust Noise Levels between
83 & 86 d B (A) allow a total vehicle
noise of 86 d B (A) only if all other
vehicle noise sources are negligible
or treated substantially for noise
reduction.
83
80
HigH
80
acceptable
79 & 83 d B (A) will allow a total
vehicle noise of 86 d B (A) with the
typical levels created by other vehicle
noise sources.
76 & 80 d B (A) will allow a total
vehicle noise of 83 d B (A) with the
typical levels created by other vehicle
noise sources.
Good
79
76
76
excellent
76
loW
Good
73 & 76 d B (A) will allow a total vehicle noise of 83 dB (A) even when one
other vehicle noise source is marginal.
73
73
excellent
Pure Exhaust Noise Levels below 73
dB (A) may be required for an 83 dB
(A) noise law. If total vehicle noise
cannot be controlled with an exhaust
noise level in this area, other vehicle
noise sources must be treated.
Pure Exhaust Noise Levels below 76
dB (A) may be required for an 86 dB
(A) noise law. If total vehicle noise
cannot be controlled with an exhaust
noise level in this area, other vehicle
noise sources must be treated.
loW
80 & 83 d B (A) allow a total vehicle
noise of 83 d B (A) only if all other
vehicle noise sources are negligible
or treated substantially for noise
reduction.
acceptable
76 & 79 d B (A) will allow a total vehicle noise of 86 dB (A) even when one
other vehicle noise source is marginal.
76
83 TOTAL VEHICLE LIMIT
Marginal
loW
loW
94
mufflers
Features:
• Mufflers manufactured by Dynaflex Products
• Complete line for major truck engines, stationary engines, off-road vehicles, and
other applications
• All mufflers designed to meet the federal noise control requirement
• Designed to offer lowest possible back pressure and sound attenuation
• Lower back pressure means improved fuel economy
• Constructed of heavy gauge T140 military grade aluminized steel throughout for
long service life
• Domed end caps top and bottom eliminate moisture entrapment and rust
• All welded construction, no interlock or crimping
MUFFLERS - style 87Q
B
I.D.
FREE FLOW DESIGN (except
Part Number
87Q-200-177*
87Q-250-186
87Q-300-187
1.
87Q-350-113
87Q-400-127
2.
87Q-400-131
87Q-400-189
3.
87Q-400-594*
87Q-4050-205
87Q-4050-514
4.
87Q-500-130
5.
5. 87Q-500-132
87Q-500-145
6.
87Q-500-624
7.
87Q-500-674
*
6.
D
I.D.
A
95
C
where indicated*)
ABCD
2”
21/2”
3”
31/2”
4”
4”
4”
4”
4”
4”
5”
5”
5”
5”
5”
2”
21/2”
3”
31/2”
4”
4”
4”
4”
5”
5”
5”
5”
5”
5”
5”
5”
6”
6”
9”
9”
9”
7”
9”
101/8”
9”
101/8”
9”
9”
8”
9”
1. FORD MUFFLER
2. MACK MUFFLER
3. FREIGHTLINER AND FORD MUFFLER
4. I.H. NAVISTAR MUFFLER
5.CURRENT OEM REPLACEMENT MUFFLER
6. UNDER CARRIAGE MUFFLER
7. New 8 inch dia body under carriage muffler
Note: 87-400-108 replaced by 87q-400-131
87-500-102 replaced by 87q-800-132
13”
16”
20”
44”
36”
44”
26”
20”
44”
44”
44”
44”
10”
26”
20”
Size
2”
21/2”
3”
31/2”
4”
4”
4”
4”
4” to 5”
4” to 5”
5”
5”
5”
5”
5”
A
C
B
D
ABCD
Part Number
A
C
B
88Q-200-250
88Q-250-073
88Q-300-218
88Q-350-509
88Q-400-133
88Q-500-121
2”
21/2”
3”
31/2”
4”
5”
2”
21/2”
3”
31/2”
4”
5”
6”
16”
7”
20”
1
8 /2”
233/4”
1
1
8 /4” x 11 /2” 20”
10”
26”
10” x 15”
26”
Size
2”
21/2”
3”
31/2”
4”
5”
MUFFLERS - style 88QH
A
ABCD
Part Number
C
88QH-200-190
88QH-250-191
88QH-300-192
88QH-400-148
88QH-400-149
B
B
2”
21/2”
3”
4”
4”
2”
21/2”
3”
4”
G 4”
6”
7”
9”
10”
10” x 15”
183/4”
20”
26”
26”
16”
Size
2”
21/2”
3”
4”
4”
D
A
MUFFLERS - style 88QT
C
C
B
B
D
Part Number
ABCD
88QT-500-305
5”
(2 plY)
5”
10” x 15”
26”
Size
5”
G
B
D
D
A
C
B
Part Number
ABCD
89Q-250-13721/2”21/2”
89Q-300-139 3”
3”
89Q-350-10631/2”31/2”
89Q-400-125 4” 4”
89Q-400-153 4” 4”
89Q-4027-185 4”
DUAL 22/4”
89Q-500-117 5”
5”
7”
8”
81/4 x 111/2
10” x 15”
81/4 x 111/2
81/4 x 111/2
10” x 15” 233/4”
26”
26”
26”
24”
26”
36”
Size
21/2”
3”
31/2”
4”
4”
4 to 23/4”
5”
96
MUFFLER IN A STACK
neW
coMing
soon!
Add “Q” to most chrome stack part
numbers to order a Quite Muffler built
into the stack or spool piece.
example:
25ZP-DQ7050114CP
The Stack Muffler can be ordered separately.
STACK DIA.
PART NO.
6”
87Q-60038AZ
7”
87Q-70038AZ
8”
87Q-80038AZ
When ordered separately, the muffler must be forced
into stack with pressure.
coMing
soon!
the BARK BUSTER™
minimizes brake noise
no more highway patrol ticket
no more headaches
97
neW
Our engineers designed this Muffler to
silence the severe noise level caused
when engine brake systems are applied.
engineering data
Caterpillar diesel engines • 1140 • 1145 • 1150 • 1160 • 3208N
noise
Mufflerexhaust
partLEVEL
d B A
stylediameternumber
BACK PRESSURE
MUFFLER ENGINE
INLET
MANIFOLD
SINGLE
VERTICAL
4”
87Q-400-131
87Q-400-120
77.0
70.5
0.3
0.4
0.5
1.0
DUAL
VERTICAL
31/2”
87Q-350-113
78.0
0.3
0.4
88Q-400-133
73.0
0.8
1.4
88QH-400-148
72.0
1.8
2.3
89Q-400-054
89Q-400-125
77.5
74.5
0.7
1.0
1.3
1.6
3”
89Q-300-139
79.0
1.0
1.2
78.5
1.0
1.3
SINGLE HORIZONTAL
VERTICAL PIPE
SINGLE HORIZONTAL
VERTICAL SIDE PIPE
SINGLE
HORIZONTAL
DUAL
HORIZONTAL
DUAL
HORIZONTAL
4”
4”
4”
31/2”
87Q-350-345
Caterpillar diesel engines • 3208T
SINGLE
VERTICAL
SINGLE HORIZONTAL
VERTICAL PIPE
SINGLE HORIZONTAL
VERTICAL SIDE PIPE
SINGLE
HORIZONTAL
4”
87Q-400-131
73.5
0.9
1.0
4”
88QH-400-148
70.5
2.6
2.7
4”
88Q-400-133
70.3
2.1
2.1
4”
89Q-400-125
73.5
2.1
2.1
Caterpillar diesel engines • 3406T
SINGLE
VERTICAL
dual
vertical
5”
4”
5”
87Q-500-132
87Q-500-130
76.5
72.0
0.3
2.0
0.5
2.5
87Q-400-131
87Q-500-102
87Q-500-132
87Q-500-130
72.5
76.5
76.5
73.0
0.2
1.8
0.1
0.5
0.5
2.2
0.5
1.0
98
Caterpillar diesel engines • 3406T (Continued)
noise
Mufflerexhaust
partLEVEL
d B A
stylediameternumber
SINGLE HORIZONTAL
5”
88Q-500-121
76.5
VERTICAL PIPE
SINGLE
HORIZONTAL
5”
89Q-500-117
back pressure
MUFFLER ENGINE
INLET
MANIFOLD
74.0
0.8
1.0
1.0
1.2
Caterpillar diesel engines • 3408N
SINGLE
5”
VERTICAL
87Q-500-132
87Q-500-130
80.0
74.0
1.0
2.6
1.2
3.0
dual
vertical
87Q-500-130
74.0
0.7
1.5
5”
cummins diesel engines • N H-220 • N H-230 • N H C-250 • Super 250
SINGLE
4”
VERTICAL
SINGLE HORIZONTAL
VERTICAL PIPE
SINGLE
HORIZONTAL
87Q-400-131
87Q-400-120
81.0
78.0
0.5
1.2
1.0
1.7
4”
88Q-400-133
78.0
1.6
2.0
4”
89Q-400-125
79.5
1.9
2.4
cummins diesel engines • N H-220T • N H C-250T
4”
SINGLE
VERTICAL
5”
SINGLE HORIZONTAL
4”
VERTICAL PIPE
SINGLE HORIZONTAL
4”
VERTICAL SIDE PIPE
SINGLE
4”
HORIZONTAL
99
87Q-400-131
87Q-400-120
87Q-500-132
87Q-500-102
87Q-500-130
74.5
73.0
79.5
77.5
74.0
0.9
2.0
0.1
1.7
0.7
1.2
2.4
0.3
2.0 0.9
88Q-400-133
71.0
2.0
2.3
88QH-400-148
74.5
1.8
2.0
89Q-400-054
89Q-400-125
77.0
75.0
1.3
2.0
1.6
2.4
cummins diesel engines
N H C T-270 • N T C-290 • N T C-300 • N T C-335 • N T C-350 • N T C-400 • V T -903
noise
Mufflerexhaust
partLEVEL
d B A
stylediameternumber
SINGLE
VERTICAL
4”
5”
87Q-400-131
80.0
2.0
2.5
87Q-500-132
87Q-500-102
80.0
75.0
0.5
1.8
1.0
2.5 4”
5”
87Q-400-131
87Q-500-132
87Q-500-102
87Q-500-130
79.0
79.5
75.5
73.0
1.3
0.3
0.3
0.3
1.9
0.5
0.5
0.5
88Q-500-121
79.5
1.1
1.8
DUAL
VERTICAL
SINGLE
HORIZONTAL
back pressure
MUFFLER
ENGINE
INLET
MANIFOLD
5”
cummins diesel engines • K T-450
SINGLE
VERTICAL
DUAL
VERTICAL
SINGLE
HORIZONTAL
DUAL
HORIZONTAL
SINGLE
HORIZONTAL
DUAL
HORIZONTAL
5”
87Q-500-130
77.5
2.8
3.0
4”
5”
87Q-400-131
87Q-400-120
76.0
73.0
0.7
1.7
1.0
2.0
87Q-500-102
87Q-500-130
80.0
76.5
2.0
1.1
2.5 1.5
5”
88Q-500-121
79.5
1.6
1.8
4”
88Q-400-133
73.5
1.5
1.7
5”
88Q-500-121
79.0
1.6
1.8
5”
89Q-500-117
79.5
2.1
2.3
4”
89Q-400-125
76.0
1.6
2.1
5”
89Q-500-117
78.0
0.5
1.1
cummins diesel engines • V T-225
SINGLE
4”
VERTICAL
SINGLE HORIZONTAL
VERTICAL PIPE
SINGLE HORIZONTAL
VERTICAL SIDE PIPE
SINGLE
HORIZONTAL
87Q-400-131
87Q-400-120
77.5
70.5
0.8
2.0
1.2
2.4
4”
88Q-400-133
73.0
1.2
1.6
4”
88QH-400-148
72.5
2.2
2.5
4”
89Q-400-125
73.5
2.0
2.3
100
DETROIT diesel engines • 6-71N
noise
Mufflerexhaust
partLEVEL
d B A
stylediameternumber
SINGLE
4”
87Q-400-120
78.5
VERTICAL
SINGLE HORIZONTAL
VERTICAL PIPE
SINGLE
HORIZONTAL
VERTICAL
SIDE PIPE
SINGLE
HORIZONTAL
back pressure
MUFFLER
ENGINE
INLET
MANIFOLD
2.4
2.7
4”
88Q-400-133
82.0
3.1
3.4
4”
88QH-400-148
80.0
2.8
3.1
4”
88Q-400-125
83.0
2.4
2.6
DETROIT diesel engines • 6-71T
SINGLE
4”
VERTICAL
87Q-400-131
78.0
0.5
1.6
DETROIT diesel engines • 6V-53N
DUAL
VERTICAL
4”
87Q-400-120
77.5
2.1
3.1
SINGLE HORIZONTAL
VERTICAL PIPE
4”
88QH-400-148
79.0
2.1
3.1
DETROIT diesel engines • 6V-53T
4”
SINGLE
5”
VERTICAL
DUAL
VERTICAL
SINGLE HORIZONTAL
VERTICAL PIPE
DUAL
HORIZONTAL
VERTICAL PIPE
SINGLE
HORIZONTAL
SINGLE
HORIZONTAL
101
87Q-400-131
80.5
2.5
2.5
87Q-500-102
87Q-500-130
82.5
79.5
1.5
1.5
1.5
1.5
4”
87Q-400-120
70.5
0.7
0.8
5”
87Q-500-130
75.5
0.3
0.4
5”
88Q-500-121
76.5
1.2
1.4
4”
88Q-400-133
79.6
0.7
0.8
5”
89Q-500-117
80.5
1.1
1.2
4”
89Q-400-125
76.0
0.8
1.0
noise
Mufflerexhaust
partLEVEL
stylediameternumber
d B A
SINGLE
5”
87Q-500-130
78.5
VERTICAL
SINGLE HORIZONTAL
back pressure
MUFFLER ENGINE
INLET
MANIFOLD
1.9
2.2
75.0
1.7
2.0
87Q-400-131
87Q-400-120
80.5
70.5
0.5
0.9
0.6
1.1
4”
88Q-400-133
75.0
0.9
1.1
4”
88QH-400-148
73.5
1.5
1.6
4”
89Q-400-054
78.5
0.6
0.6
5”
88Q-500-121
DETROIT diesel engines • 8.2 L-N
SINGLE
4”
VERTICAL
SINGLE HORIZONTAL
VERTICAL PIPE
SINGLE HORIZONTAL
VERTICAL SIDE PIPE
SINGLE
HORIZONTAL
DETROIT diesel engines • 8.2 L-T
SINGLE
4”
VERTICAL
87Q-400-131
87Q-400-120
73.6
71.3
1.1
2.3
1.3
2.5
SINGLE HORIZONTAL
VERTICAL PIPE
SINGLE
4”
88Q-400-133
69.0
1.8
2.0
89Q-400-054
89Q-400-125
77.0
74.5
1.6
2.5
1.8
2.7
81.0
1.9
3.8
87Q-400-131
87Q-500-132
87Q-500-102
87Q-500-130
78.5
82.5
76.0
73.5
0.5
0.2
1.9
0.7
1.6
0.3
2.0
0.9
88Q-500-121
83.0
1.8
2.1
89Q-400-125
88Q-500-121
75.0
81.0
1.5
0.4
2.4
0.5
4”
HORIZONTAL
SINGLE
5”
VERTICAL
87Q-500-130
4”
SINGLE
VERTICAL
5”
SINGLE
5”
HORIZONTAL
4”
DUAL
HORIZONTAL
5”
102
DETROIT diesel engines • 8V-71T ( Continued)
noise
Mufflerexhaust
partLEVEL
d B A
stylediameternumber
DUAL
4”
89Q-400-125
75.0
HORIZONTAL
back pressure
MUFFLER
ENGINE
INLET
MANIFOLD
1.5
2.4
4”
DUAL
VERTICAL
5”
DUAL
5”
HORIZONTAL
DUAL
HORIZONTAL
5”
87Q-400-131
77.5
1.2
1.7
87Q-500-132
87Q-500-102
87Q-500-130
82.0
78.0
74.0
0.7
2.1
1.1
0.8
2.5
1.5
88Q-500-121
82.0
0.6
1.1
89Q-500-117
78.0
0.8
1.3
DUAL
4”
VERTICAL
DUAL HORIZONTAL
VERTICAL
SIDE PIPE
4”
87Q-400-120
80.5
2.4
2.7
88QH-400-148
82.0
2.8
3.1
international harvester diesel engines • D T-466
SINGLE
VERTICAL
4”
87Q-400-131
73.5
0.2
0.6
SINGLE
4”
HORIZONTAL
89Q-400-125
73.5
1.5
1.9
mack diesel engines • END T-675 • END T-673C
4”
SINGLE
VERTICAL
5”
DUAL
VERTICAL
DUAL
HORIZONTAL
103
87Q-400-131
71.5
0.9
1.3
87Q-500-132
87Q-500-130
76.5
69.0
0.1
0.6
0.4
1.0
4”
87Q-400-131
74.0
0.2
0.3
4”
89Q-400-054
72.5
1.2
1.7
inlet cap force air
Note:
all inlet cap series
c f, c j, c l, c R, c s seat
17/8” on to stack prior
to fastening.
18"
11 7/8"
B
A
Standard Finish is Black Paint
SIZEPART NO.A
51/2”
90C F-550
5 1/2”
6”
90C F-600
6”
7”
90C F-700
7”
8”
90C F-800
8”
B
9 5/8”
91/2”
9 5/16”
8 1/8”
ALTERNATE MATERIAL:
ADD CP FOR RUST PROOF CHROME PLATED FINISH
wt. lbs.
5
5
5
5
EXAMPLE:
90C F-700CP
104
BB
B B
Air INLET CAPS
GENERAL PURPOSE -- C J
SIZEPART NO.A
7”
90C J-700
7”
8”
90C J-800
8”
CC
C C
B
151/16”
151/16”
C
61/4”
61/4”
ALTERNATE MATERIAL:
ADD CP FOR CHROME PLATED FINISH
AA
A A
wt. lbs.
4.7
4.7
EXAMPLE:
90C J-700CP
LOW VELOCITY RAIN cap -- C L
BB
B B
SIZEPART NO.A
51/2”
90C L-550
5 1/2”
6”
90C L-600
6”
7”
90C L-700
7”
CC
C C
AA
A A
C
41/4”
41/4”
41/4”
ALTERNATE MATERIAL:
wt. lbs.
5.5
5.5
6.0
EXAMPLE:
90C L-700CP
LOW VELOCITY cap -- C R
with 180° rain SHIELD
BB
B B
CC
C C
AA
A A
B
161/16”
161/16”
161/16”
SIZEPART NO.A
6”
90C R-600
6”
7”
90C R-700
7”
8”
90C R-800
8”
B
161/16”
161/16”
18 1/8”
C
613/16”
613/16”
73/4”
ALTERNATE MATERIAL:
wt. lbs.
6.8
6.8
9.3
EXAMPLE:
90C R-700CP
GENERAL PURPOSE standard cap -- C S
BB
B B
CC
C C
AA
A A
105
SIZEPART NO.A
4”
90C S-400
4”
5”
90C S-500
5”
51/2”
90C S-550
5 1/2”
6”
6”
90C S-600
7”
90C S-700
7”
ALTERNATE MATERIAL:
B
8”
9 1/2”
121/16”
121/16”
13 9/16”
C
41/2”
43/4”
43/4”
51/2”
51/2”
wt. lbs.
3.2
3.6
4.0
4.5
4.5
EXAMPLE:
90C S-700CP
aluminum tubing
MATERIAL: aluminum
construction
grade
O.D. SIZEPART NO.
2”
90-200
3”
90-300
4”
90-400
5”
90-500
90-550
51/2”
6”
90-600
7”
90-700
8”
90-800
10 FT. 10 FT.
10 FT.
O.D.
O.D.
O.D.
expanders --- reducers
style 90A
l
l
MATERIAL: aluminized steel
l
O.D.
O.D.
O.D.
O.D.
O.D.
O.D.
O.D. SIZEPART NO.L
21/2”- 3”
90A-2530
5”
3”- 31/2”
90A-3035
5”
90A-3040
7”
3”- 4”
90A-3540
7”
31/2”- 4”
31/2”- 41/2”
90A-3545
7”
31/2”- 5”
90A-3550
8”
4”- 41/2”
90A-4045
7”
4”- 5”
90A-4050
8”
5”- 51/2”
90A-5055
8”
5”- 6”
90A-5060
8”
cradle bracket --- stainless steel
4 1/4"
1 1/ 2"
1 1/2"
1 1/2"
4 1/4"
4 1/4"
MATERIAL: Stainless STEEL
DIA HOlE
1/4" DIA1/4"
HOlE
1/4" DIA HOlE
PART NO.
91B R K-000S
used with 91 series
band clamp
size: 350 thru 550
106
air INLET ClamPS
stainless steel
for use overrubber elbows andhump hoses
T-BOlT
T-BOlT
STYlE ClAMp
T-BOlT
STYlE ClAMp
STYlE ClAMp
ClAMp
ClAMp
I.D.ClAMp
I.D.
I.D.
Hose I.D. PART
SIZE
Number
11/2”
91-150
2”
91-200
21/4”
91-225
1
2 /2”
91-250
23/4”
91-275
3”
91-300
31/8”
91-312
31/2”
91-350
4”
91-400
91-450
41/2”
5”
91-500
STAINlESS
1/2”
5
91-550
STAINlESS
STEEl
6”
91-600
STAINlESS
STEEl
7”
91-700
STEEl
8”
91-800
10”
91-1000
CLAMP
I.D.
2”
21/2”
23/4”
3”
31/4”
31/2”
3 5/8”
4”
41/2”
5”
51/2”
6”
61/2”
71/2”
81/2”
101/2”
SUPPORT ClamPS
stainless steel
I.D.
I.D.
I.D.
SIZEPART NO.
91S C-350
31/2”
4”
91S C-400
41/2”
91S C-450
5”
91S C-500
51/2”
91S C-550
I.D.
4”
41/2”
5”
51/2”
6”
THIS CLAMP IS USED FOR MOUNTING CYLINDRICAL OBJECTS TO A BASE.
SPRING LOADED ClamPS
stainless steel
NOM.
NOM.
DIA.NOM.
DIA.
DIA.
107
SIZEPART NO.
21/2”
91S LC-241
91S LC-275
23/4”
35/32”
91S LC-316
313/32”
91S LC-341
2 29/32”
91S LC-291
2 21/32”
91S LC-266
3 29/32”
91S LC-391
49/32”
91S LC-427
NOM. DIA
2.41
2.75
3.16
3.41
2.91
2.66
3.91
4.27
SPRING LOADED CLAMPS LISTED ARE USED TO COMPENSATE FOR
COLD FLOW OF SOFT SILICONE HOSE AND /OR THERMAL EXPANSION.
RUBBER AIR INLET
90° ELBOWS
I.D.
I.D.I.D.
I.D.
H
H
HH
ll l l
I.D. SIZEPART NO.
2”
92-200
21/2”
92-250
3”
92-300
31/2”
92-350
4” 92-400
1
4 /2”
92-450
5”
92-500
51/2”
92-550
6”
92-600
7”
92-700
8”
92-800
10”
92-1000
51/2”
92S R-550
6”
92S R-600
HL
51/2”
53/4”
1
4 /4”
41/4”
1
5 /4”
51/4”
51/2”
51/2”
53/4”
53/4”
6”
6”
61/8”
61/8”
1
6 /2”
61/2”
7”
7”
71/2”
71/2”
1
8 /2”
81/2”
101/2”
101/2”
8”
51/2”
5”
5”
RIBBED FOR STRENGTH 5” AND UP.
RUBBER AIR INLET
45° ELBOWS
RUBBER AIR INLET
HUMP HOSE
ll l l
ll l l
SIZEPART NO.L
3”
93-300
3”
31/2”
93-350
31/8”
4”
93-400
31/4”
1
4 /2”
93-450
33/8”
5”
93-500
31/2”
1
5 /2”
93-550
33/4”
6”
93-600
4”
7”
93-700
41/2”
8”
93-800
6”
10”
93-1000
7”
I.D.
I.D.I.D.
I.D.
I.D.
I.D.I.D.
I.D.
SIZEPART NO.L
3”
94-300
51/4”
3”
94-300SIL Silicone
31/2”
94-350
51/4”
4”
94-400
51/4”
1
4 /2”
94-450
51/4”
5”
94-500
6”
51/2”
94-550
6”
6”
94-600
7”
7”
94-700
7”
8”
94-800
5”
10”
94-1000
6”
construction: Molded Neoprene Conforming To
S AE J200-3B C 720A14 B14 C20E14
ll l l
ll l l
45°
45°45°
45°
HUMP HOSE
REDUCERS
TEMPERATURE: -70° to +250°F
SIL=Silicone
I.D.
I.D.I.D.
I.D.
I.D.
I.D.I.D.
I.D.
SIZEPART NO.L
31/2”- 3”
95-3530
51/4”
4”- 3” 95-4030
51/4”
4”- 31/2”
95-4035
51/4”
5”- 4”
95-5040
51/2”
1
95-5540
6”
5 /2”- 4”
51/2”- 5”
95-5550
6”
6”- 5”
95-6050
6”
6”- 51/2”
95-6055
6”
6”- 51/2”
95-6055S I L 6”
7”- 51/2”
95-7055
7”
7”- 6”
95-7060
5”
95-8055
5”
8”- 51/2”
8”- 6”
95-8060
5”
8”- 7”
95-8070
5”
10”- 8”
95-10080
6”
108
reducing 90° ELBOWS
I.D.
45° Elbow --- Short Radius --- Short Radius --- H
l
45°
l
SIZEPART NO.
4”- 3”
97-4030
1
4”- 3 /2”
97-4035
41/2”- 4” l
97-4540
5”- 4”
97-5040
5”- 41/2”
97-5045
51/2”- 4”
97-5540
I.D.
51/2”- 5”
97-5550
6”- 51/2”
97-6055
6”- 5”
97-6050
7”- 6”
97-7060
8”- 7”
97-8070
I.D. SIZEPART NO.
4”- 3”
96-4030
4”- 31/2”
96-4035
5”- 4”
96-5040
51/2”- 31/2”
96-5535
51/2”- 5”
96-5550
6”- 5”
96-6050
6”- 51/2”
96-6055
7”- 5”
96-7050
7”- 51/2”
96-7055
7”- 6”
96-7060
7”- 6”
96-7060-45
6”- 5”
96SR-6050
6”- 51/2”
96S R-6055
8”- 7”
96-8070
HL
4”43/4”
3 5/8”
41/2”
3
5 /4”
53/4”
6”4 7/8”
51/4”
61/2”
7”
6”
6 3/4”
63/4”
6 3/4”
63/4”
53/4”
61/4”
9”71/2”
7 3/8”
--413/16”
8”
reducer insert sleeve
1 1/21"
1 /2"
l
I.D.
O.D
O.D
I.D.
1
/41"
/4 "
l
I.D.
I.D.
I.D.
special ELBOWS
I.D.
I.D.
H
H
109
5”
8”
I.D. SIZEPART NO.
4”
98-400-22
41/2”
98-450-68
51/2”
98-550-22
51/2”
98-550-54
51/2”
98-550-68
6”
98-600-22
6”
98-600-38
6”
98-600-54
6”
98-600-68
7”
98-700-22
7”
98-700-68
7”- 6”
98-7060-68
8”
98-800-63
DEGREE
22°
68°
22°
54°
68°
22°
38°
54°
68°
22°
68°
68°
63°
H
41/2”
63/4”
51/4”
73/4”
81/4”
51/4”
71/4”
71/2”
81/2”
6”
81/2”
--11”
convoluted charge air hoses
max
SIZEPART NO.O. D.LP S I
3”
99-8731
3.28
6”
60
31/2”
99-8732
3.73
6”
55
4”
99-8715
4.23
6”
50
4”
99-8727
4.23
8”
50
Use only T-Bolt Style Clamps.
Torque to 70-75 inch- pounds.
Recommended Bead Specifications
M S-33660 or S AE J962
turbocharger hoses
T-Bolt Clamp
Formed
Tube End
.25"
Min
Silicone Charge Air
Connector
1.25"
Min
110
Meets O.E.M. & S.A.E. Specs
SIZE
33/8”
3”
33/8”
31/2”
4”
3”
4”
3”
33/8”
31/2”
4”
PART NO.Length O E M part No.
99-1229
6”
D 1229 & 208712
6”
D 1225
99-1225
99-202994
31/2” 202994
99-516288A
23/4” 516288A
99-744G B195A
21/2”MACK 744G B 195A
99-744G B216P L
3”MACK 744G B
99-8926957
23/4” G M C 8926957
99-300-36
36”
Bulk 3 Ft. Lengths
99-338-36
36”
Bulk 3 Ft. Lengths
99-350-36
36”
Bulk 3 Ft. Lengths
99-400-36
36”
Bulk 3 Ft. Lengths
110
heavy-duty hood hook/ battery tie downs
100-017
5- 7/8” Tie Down Hood Hook Kit
Consists of: 101-009
5- 7/8” Tiedown Strap (without anti-rattle nub)
5/16” 24N F x 2” Bolt with nylon lock nut
101-019
101-035
1- 5/8” Anchor Bracket
101-043
2- 5/32” Bracket, stem-up
11/16 SPHERICAL
RADIUS
100-025
Ø5/16
part anti NO.abc
Drattle
101-009 5-7/8” 3-3/4” 1-5/16” 4-7/8”
No
101-207 5-7/8” 3-3/4” 1-5/16” 4-7/8” Yes
101-306 8”
5-7/8” 1-5/16”
7”
Yes
5- 7/8” Tiedown Strap (without anti-rattle nub)
101-019
101-035
101-050
2- 1/16” Bracket, stem-down
100-215
5- 7/8” Tiedown Strap (with anti-rattle nub)
101-019
101-035
101-043
Replaces Peterbilt #23-02233
100-223
Bracket, Stem Down
101-050
101-019
101-035
101-050
Replaces Paccar #37F W1
100-231
Bracket, Stem-up
101-043
101-019
101-035
101-043
101-068
101-076
2” x 31 Anchor Pin
Replaces I H C #491668C92
100-314
8” Tie Down Hood Hook Kit
101-306
8” Tiedown Strap (with anti-rattle nub)
101-019
101-035
101-043
Consists of:
Bracket, short Stem-down
101-068
Replaces Peterbilt #23-02700
Replaces Freightliner #N31-01703-00
100-322
8” Tie Down Hood Hook Kit
101-306
8” Tiedown Strap (with anti-rattle nub)
101-019
101-035
101-050
Consists of:
anchor Bracket
101-035
111
Dynaflex Products is a 100% American manufacturer of high quality heavy duty truck, bus, construction,
marine, military, automotive and specialty exhaust products. Dynaflex continues to lead the industry with
innovations such as slip-fit stacks, eight inch diameter Jumbo Stacks, a chrome stack with a built-in muffler
that complies with exhaust noise laws, etc.
Dynaflex’s “Duplex” nickel chrome is recognized as the industry’s highest quality. Products are constructed
from high quality cold rolled steel, aluminized steel, stainless and polished stainless steel. Wrinkle free
bends are available in a wide variety of materials ranging from one-inch diameter through twelve-inch
diameter.
Dynaflex warrants its products against defects in workmanship and materials for one (1) year from date of
original user purchase. Misuse, failure to protect the product from soot or chemical damage, damage from
road hazards, and alterations such as welding, drilling or cutting void the warranty. Labor is not warranted.
Chrome parts damaged by a freight company do not constitute a warranty claim. If you receive a dented
or damaged stack, your claim should be directed to the responsible freight company.
PRINTED IN U.S.A. COPYRIGHT 2003
Contact us for any of our other catalogs
AUTOMOTIVE COMPONENTS
EXHAUST TECH
MINI CATALOG
160-A
MUFFLER CATALOG 180
Z-SERIES MONSTER STACK
CATALOG 170-A
112

stainless steel

Transcription

Similar documents

stainless steel - Dynaflex Products

ozzie curve - Dynaflex Products

CONCRETE PUMPS