HELLRAISER SPECIAL C

Transcription

HELLRAISER SPECIAL C
Hellraiser Special C-7
Wiring Diagram
3
Neck pickup
EMG 85-7
Bridge
volume
25k
2
Bare
2
EMG
Red
White
3-way
switch
1
Bridge pickup
EMG 81-7
Bare
White
EMG
3-way switch settings
1
2
3
Neck
Red
9-Volt
9-Volt
battery
battery
Bridge
.1
Master
tone
25k
Ring (battery ground)
Bridge Vol
Tone
2
3
Tip (hot output)
Sleeve (ground)
Neck Vol
Tone
Neck
volume
25k
1
3-Way
Switch
For technical or warranty questions please email: [email protected]
Diagram copyright Schecter Guitar Research 2011
Output Jack
= ground. This symbol
is found where any ground connection
should be soldered.
a
Hellraiser Special C-7
Neck Specs:
c
b
d
Scale Length: 674mm/26.5”
A: Width at Nut- 48mm
B: Width at Last Fret- 68mm
C: Thickness at 1st Fret- 20mm
D: Thickness at 12th Fret- 22mm
Radius: 406mm/16”
radius
Bridge Pickup
Name:
Model No:
Construction:
Magnet:
Output:
Description:
EMG 81-7
81-7
Humbucker
Ceramic
Impedance 10K ohm
The 81-7 is a high output pickup
designed especially for the 7-string
lead guitarist. The 81 is at its best
for high volume overdrive and amps
with a master volume. Whether
you're playing power rock and roll,
or overdriving your amp, there's a
razor sharp attack, and incredible
sustain for brilliant soloing.
Neck Pickup
Name:
Model No:
Construction:
Magnet:
Output:
Description:
Strings
7-String Guitar*
Tuning: B-E-A-D-G-B-E
Gauge: .056-.046-.036-.026-.017-.013-.010
(EB Regular Slinky #2621)
*Changing to different string gauges and/or
alternate tunings may require minor neck/bridge
adjustments for optimal performance. For Schecter
setup tips refer to Schecter Setup Guide.
EMG 85-7
85-7
Humbucker
Alnico V
Impedance 10K ohm
Featuring Alnico V loaded wide
aperture coils we were able to
beef up that Low B tone and at
the same time provide a more
responsive super tight overall
sound. Whether you are ringing
out Opeth-style jazzy chords or
playing palm muted death
chugs, even with the amp set to
“kill”, these pickups will articulate
every note, harmonic and squeal
you ask of them.
This model is equipped with a Graph Tech Black TUSQ XL
nut. The Black TUSQ XL delivers a rich and balanced tone
with big open lows and a noticeable increase in overall
sustain followed by a very balanced output from your strings.
Laboratory-proven to enhance harmonic content up to 200%
and sustain up to 16% and is engineered for maximum
vibration transfer. Designed to transfer the right frequencies
more efficiently from the string to the guitar body. Compared
to standard materials such as bone, micarta or corian, you'll
hear more harmonics with every note you play when you use
TUSQ XL on your guitar. As compared to TUSQ, you will
hear added midrange depth, and is impregnated with Teflon
to improve the tuning performance of the guitar.