MRO Supplies - John Day Company

Transcription

Ashcroft Gauges
MRO Supplies
Phone: 402-455-6151
Toll Free: 800-488-9699
773
MRO Supplies
Ashcroft Gauges
Phone: 402-455-6151
Toll Free: 800-488-9699
774
Grinnell Pipe Fittings
MRO Supplies
Phone: 402-455-6151
Toll Free: 800-488-9699
775
MRO Supplies
Phone: 402-455-6151
Toll Free: 800-488-9699
776
MRO Supplies
Phone: 402-455-6151
Toll Free: 800-488-9699
777
MRO Supplies
Phone: 402-455-6151
Toll Free: 800-488-9699
778
MRO Supplies
Phone: 402-455-6151
Toll Free: 800-488-9699
779
MRO Supplies
Phone: 402-455-6151
Toll Free: 800-488-9699
780
Springs
Gardner No. 1 Industrial Spring Assortment
Packing Tools
C.S. Osborne Flexible Packing Hooks No. 1204
Series
90 zinc plated extension and compression springs for the production line and
maintenance department. A low cost safety factor against breakdown. A
favorite mill supple stock item.
PartNo
GUARD 1
Hand Stamps
Description
IND SPRING ASST
•These hooks are strongly made of toughest materials
•Two spiral steel shafts, one inside the other, wound in opposite directions,
make up the shank
•Handle is solid zinc
•Hook is tempered and permanently pointed
•Don't struggle with stubborn packing
C.H. Hanson Standard Steel Hand
Stamp Set
Description
Size No.
OSBO 1204-1
OSBO 1204-2
OSBO 1204-3
OSBO 1204-4
OSBO 1204-5
6-1/4" LG SM PACKING HOOK
10-5/8" LG MED PKG HOOK
15" LG LARGE PACKING HOOK
18" LG LARGE PACKING HOOK
22" LG X-LARGE PACKING
HOOK
1
2
3
4
5
Dia. of
Shaft In.
3/16
1/4
3/8
3/8
3/8
Dia. of
Lgth. of
Spiral In. Spiral In.
1/4
3/4
5/16
1 1/8
3/8
1 1/2
1/2
1 7/8
5/8
1 7/8
Valves
Ball Valves
Grinnell Bronze Ball Valves
MRO Supplies
For hand-held, hammer-struck applications. Crowned striking end insures full
force to the center of the stamp. Textured shanks provide a firm, easy grip.
Packed in durable plastic or sturdy wood storage containers. Letter sets
contain 27 pieces - A thru Z plus ampersand (&). Number sets contain 9
pieces - 0 thru 8 (the 6 is used as a 9). Combination Letter and Number sets
contain 36 pieces - A thru Z, period, 1 thru 8 (the 6 is used as a 9), and are
packed in a metal index container. High quality for general purpose uses at a
low cost. Recommended for medium to light duty marking. Marked with
character size on thumb side.
PartNo
C.H. Hanson supplies heavy duty and premier industrial grades of letter &
number stamps in addition to the general purpose standard grade shown here.
Contact your John Day Company representative for more information.
PartNo
Description
GST 20200
GST 20250
GST 20300
GST 20350
GST 20400
GST 20501
GST 20100
GST 20150
GST 20521
GST 20541
GST 20561
GST 20581
GST 20601
GST 20621
GST 20622
GST 20623
GST 20624
GST 20625
GST 20626
GST 20627
1/8" LETTER SET STEEL
1/2" SET A-Z HAND STAMPS
1/16" FIGURE SET STEEL
1/2" SET 1-0 HAND STAMPS
1/16" COMBINATION SET
Phone: 402-455-6151
Toll Free: 800-488-9699
OA Size (Sq x
Lgth) In.
1/4 x 2-3/8
5/16 x 2-3/8
3/8 x 2-5/8
1/2 x 2-3/4
5/8 x 3
1/4 x 2-3/8
1/4 x 2-3/8
1/4 x 2-3/8
1/4 x 2-3/8
1/4 x 2-3/8
5/16 x 2-3/8
3/8 x 2-5/8
1/2 x 2-3/4
5/8 x 3
1/4 x 2-3/8
1/4 x 2-3/8
1/4 x 2-3/8
5/16 x 2-3/8
3/8 x 2-5/8
1/2 x 2-3/4
781
No. 171N Ball Valve, 600-Lbs. water, oil and gas 150-Lbs. steam, threaded
ends, teflon asbestos packing, chrome plated, brass ball.
PartNo
GRIN 1/4" 171N
GRIN 3/8" 171N
GRIN 1/2" 171N
GRIN 3/4" 171N
GRIN 1" 171N
GRIN 1-1/4" 171N
GRIN 1-1/2" 171N
GRIN 2" 171N
Description
BRONZE FP THRDED BALL VALVE
Size In.
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
Tool Wrap
Drill Rod
•Precision Brand Tool Wrap is made of type 321, soft annealed, stainless steel
•Helps protect from scale and oxide buildup during heat treating in
atmospheric furnaces
•Eliminates decarburization buildup
•Resistant to chromium carbide precipitation during exposure to high
temperatures
•Protects the surface of air hardening tool steels
•Cut-to-fit stainless steel tool wrap creates an airtight envelope around your
part
•Can be cut, folded and crease-sealed with ease
•Can use in furnaces up to 1850°F (996°C)
•You realize the benefits of a vacuum furnace at a fraction of the cost
•Packaged in handy recloseable cartons
•Approximately 24 inches wide, in 50 and 100 feet lengths
•Other lengths and bulk material are available on special order
Precision Brand drill rod rounds are made of annealed, ground and polished
general purpose tool steel. Used for punches, tools and dies, drills, taps,
arbors, roller bearings, dowel pins and a variety of machine parts where high
strength and long life are required. Excellent finish, strength and
machinability makes drill rod ideally suited for power drive shafts and
applications where accuracy and straightness are required. Stocked in 3 feet
lengths. Available in water hardening (W-1) and oil hardening (0-1) grades.
Other grade and sizes, including metric are available on special order.
Water Hardening/W-1.
Precision Brand Tool Wrap
PartNo
PRBR 20110
PRBR 20210
PRBR 20215
Precision Brand Drill Rod
Description
APPROX 24"W X 50’L X .002"THICK
APPROX 24"W X 100’L X .002"THICK
SEAM ROLLER TOOL
Features: Color coded with red ends. Made from a 1095 steel. Most popular
type. Most versatile and least expensive. Tough hardening quality affords
optimum response to heat treatment and provides toughness and maximum
wear resistance in service. High carbon content allows it to be used without
heat treatment for many maintenance applications. Fine-grained electric
furnace melted commercial grade tool steel. 90% minimum spheroidization,
100% free of decarburization. Meets STM A-686, SAE J-437.
Typical Analysis: C .95 - 1.05, Mn .30-.40, Si .10-.25, Cr .15 max., W .15
max., Mo .10 max., V .10 max., P .025 max., S .025 max.
MRO Supplies
Oil Hardening/ 0-1 Features: Color coded with yellow ends. Made from a
1085 steel. Electric furnace melt tool steel. 90% minimum spheroidization.
Non-shrinking general-purpose tool steel. Highly abrasion resistant. Excellent
toughness and machinability.
For Additional Product Information
Call Industrial Sales at
800-488-9699 or visit
www.johnday.com
Visit Us At
www.johnday.com
Phone: 402-455-6151
Toll Free: 800-488-9699
782
PartNo
PRBR 18162
PRBR 18151
PRBR 18143
PRBR 18136
PRBR 18094
PRBR 18080
PRBR 18069
PRBR 18137
PRBR 18114
PRBR 18095
PRBR 18081
PRBR 18070
PRBR 18061
PRBR 18057
PRBR 18053
PRBR 18041
PRBR 18025
PRBR 18021
PRBR 18017
PRBR 18013
PRBR 18007
PRBR 18001
PRBR 28137
PRBR 28095
PRBR 28081
PRBR 28070
PRBR 28061
PRBR 28057
PRBR 28049
PRBR 28041
Description
#52 DRILL ROD - WATER
"E" DRILL ROD - WATER
"O" DRILL ROD - WATER
"V" DRILL ROD - WATER
1/8" DRILL ROD - WATER
1" DRILL ROD - WATER
1 1/8" DRILL ROD - WATER
2" DRILL ROD - WATER
1/8" DRILL ROD - OIL
5/8" DRILL ROD -OIL
Dia. Dec.
.063
.092
.108
.127
.250
.316
.377
.125
.1875
.250
.3125
.375
.4375
.500
.5625
.750
1.0000
1.125
1.250
1.375
1.625
2.0000
.125
.250
.3125
.375
.4375
.500
.625
.750
Drill Rod
Precision Brand Steel Feeler Gage - Flat
Length Feeler Gage
Precision Brand Drill Rod
PartNo
PRBR 28033
PRBR 28025
PRBR 28017
PRBR 28009
PRBR 28007
PRBR 28005
PRBR 28001
Description
1" DRILL ROD - OIL
1 1/4" DRILL ROD - OIL
2" DRILL ROD - OIL
Dia. Dec.
.875
1.0000
1.250
1.500
1.625
1.750
2.0000
Shim Stock
Precision Brand Steel Shim Rolls
•Precision Brand Feeler Gage is made from spring steel stock, close grain
C1095 high carbon steel
•Hardened and tempered to RC 48-62
•Material is ground and polished to precision tolerances
•Used in manufacturing and maintenance operations wherever setting close
spacing or checking extremely tight tolerances is required
•Thickness is clearly etched every 6 Inch in decimal and metric
•Also available in 25' coils & bulk quantities
•Also available in 5" long lengths
•Ends are rounded and edges are smooth for safety
•Each piece has a 3/16 Inch hole at one end
PartNo
PRBR 16A1
PRBR 16A1X
PRBR 16A2
PRBR 16A3
PRBR 16A4
PRBR 16A5
PRBR 16A6
PRBR 16A7
PRBR 16A8
PRBR 16A9
PRBR 16A10
PRBR 16A12
PRBR 16A15
PRBR 16A20
PRBR 16A25
PRBR 16A31
Description
6"X100".001 STEEL SHIMSTOCK
Phone: 402-455-6151
Toll Free: 800-488-9699
783
Description
PRBR 19K1
PRBR 19K1X
PRBR 19K2
PRBR 19K2X
PRBR 19K3
PRBR 19K4
PRBR 19K5
PRBR 19K6
PRBR 19K7
PRBR 19K8
PRBR 19K9
PRBR 19K10
PRBR 19K11
PRBR 19K12
PRBR 19K13
PRBR 19K14
PRBR 19K15
PRBR 19K16
PRBR 19K17
PRBR 19K18
PRBR 19K19
PRBR 19K20
PRBR 19K21
PRBR 19K22
PRBR 19K23
PRBR 19K24
PRBR 19K25
PRBR 19K28
PRBR 19K30
PRBR 19K31
PRBR 19K32
PRBR 19K34
1/2"X12" .001 FLR GAUGE STOCK
Metric Thck.
mm
.025
.038
.051
.064
.076
.102
.127
.152
.178
.203
.229
.254
.279
.305
.330
.356
.381
.406
.432
.457
.483
.508
.533
.559
.584
.610
.635
.711
.762
.787
.813
.864
MRO Supplies
•Precision Brand Steel Shim Stock is a full hard, cold rolled, low carbon 1010
•Rockwell hardness RB90-100
•Meets ASTM A-109, AISI 1010
•Approximate tensile strength - 80,000 psi
•#2 Bright Finish
PartNo
Non-Destructive Testing Equipment
Shim Stock
Precsion Brand Brass Shim Rolls
Magnaflux SKL-SP1 Spotcheck Solvent
Removable Penetrant
•Precision Brand Brass Shim Stock is a half hard, cold rolled, CDA 260 alloy
•Rockwell hardness 3OT 56 - 68
•Meets SAE-CA-260, ASTM B-19, B-36, CDA 260
MAGNAFLUX® offers a complete line of liquid penetrant inspection,
•Tensile strength - 57,000 - 67,000 psi
magnetic particle inspection, equipment and accessories, as well as processing
•Elongation - 23% in 2 Inch
PartNo
Description
Metric Thck. materials, all of which are designed specifically for the Non-Destructive
mm
Testing industry.
PRBR 17S1
6"X100".001 BRASS SHIMSTOCK
.025
Spotcheck® is a red-visable , non-destructive test method.
PRBR 17S1X
.038
Most widely used, general purpose solvent removable penetrant. This 12 oz
PRBR 17S2
.051
PRBR 17S3
.076
aerosol is good for rough surfaces and large parts.
PRBR 17S4
.102
Approved Developers: SKD-S2 & ZP-5B.
PRBR 17S5
.127
Approved Cleaner: SKC-S
PRBR 17S10
.254
PRBR 17S15
PRBR 17S20
PRBR 17S25
PRBR 17S31
.381
.508
.635
.787
Precision Brand Stainless Steel Shim Rolls
PartNo
MAGFLU 01-5150-68
MAGFLU 01-5150-35
MAGFLU 01-5150-40
MAGFLU 01-5150-45
MAGFLU 01-5150-79
Description
12-OZ. SOLVENT REMOVABLE PENETRANT
1 GALLON SOLVENT REMOVABLE PENETRANT
5 GALLON PAIL SOLVENT REMOVABLE PENETRANT
55 GALLON DRUM SOLVENT REMOVABLE PENETRANT
PENETRANT, 16 OZ., SKL-SP1
MRO Supplies
Magnaflux SKL-4C Spotcheck Water Based
Penetrant
Bright red in the daylight; fluorescent orange in UV light. Liquid oxygen
compatible. For non-certified applications. Used as a leak detector and for
inspection of plastic.
Approved Developer: SKD-S2
Approved Cleaner: Not Required
PartNo
MAGFLU 01-5125-40
MAGFLU 01-5125-45
•Precision Brand Stainless Steel Shim Stock is a full hard, cold rolled, Type
302
•Rockwell hardness C40-45
•Meets SAE 30302, AISI-T302, ASTM A-666
•Ultimate tensile strength - 185,000 psi
PartNo
Description
PRBR 22L0
PRBR 22L1
PRBR 22L2
PRBR 22L3
PRBR 22L4
PRBR 22L5
PRBR 22L10
PRBR 22L15
PRBR 22L20
PRBR 22L25
PRBR22L31
6"X50" .001 S.S. SHIM STOCK
6"X50" .O31 S.S. SHIM STOCK
Phone: 402-455-6151
Toll Free: 800-488-9699
Metric Thck.
mm
.025
.038
.051
.076
.102
.127
.254
.381
.508
.635
.787
784
Description
5 GALLON PAIL WATER BASED PENETRANT
55 GALLON WATER BASED PENETRANT
Magnaflux SKL-WP Spotcheck Water
Washable Penetrant
General purpose water washable penetrant.
Approved Developers: SKD-S2 & ZP-5B.
Approved Cleaner: Not Required
PartNo
MAGFLU 01-5182-68
MAGFLU 01-5185-35
MAGFLU 01-5182-42
MAGFLU 01-5182-45
Description
CASE OF 12 WATER WASHABLE PENETRANT 12 OZ
AEROSOL
CASE OF 4 WATER WASHABLE PENETRANT
5 GALLON WATER WASHABALE PENETRANT
55 GALLON WATER WASHABLE PENETRANT
Magnaflux SKC-S Spotcheck Solvent Cleaner
The recommended, general purpose cleaner/remover. Non-Chlorinated.
Flammable. Meets major requirements for major specifications.
PartNo
MAGFLU 01-5750-68
MAGFLU 01-5750-35
MAGFLU 01-5750-40
MAGFLU 01-5750-45
Description
CASE OF 12 SOLVENT CLEANER 12 OZ AEROSOL
CASE OF 4 SOLVENT CLEANER
5 GALLON SOLVENT CLEANER
Wet Magnetic Particle Inspection
Magnaflux SKC-HF Spotcheck Solvent Cleaner 14A Fluorescent Particles
High Flash point, Low odor cleaner/remover. Meets sulfur and chlorine
requirements of major specifications.
PartNo
MAGFLU 01-5725-68
MAGFLU 01-5725-40
MAGFLU 01-5725-45
Description
CASE OF 12 SOLVENT CLEANER 12 OZ AEROSOL
Magnaflux SKD-S2 Spotcheck Solvent
Developer
General purpose solvent developer.
PartNo
MAGFLU 01-5352-68
MAGFLU 01-5352-35
MAGFLU 01-5352-40
MAGFLU 01-5352-45
Description
CASE OF 12 SOLVENT DEVELOPER 12 OZ AEROSOL
CASE OF 4 SOLVENT DEVELOPER
5 GALLON SOLVENT DEVELOPER
55 GALLON SOLVENT DEVELOPER
Magnaflux ZP-5B Spotcheck Aqueous Water
Suspendible Developer
General purpose water suspendible developer.
PartNo
MAGFLU 01-3341-81
Description
25 LB. SUSPENDIBLE DEVELOPER
Magnaflux SK-412 Spotcheck® Portable Kit
(12 Oz.)
14A is a dry, free flowing, brown magnetic powder which fluorescents bright
yellow-green under black light. 14A is intended for use in light sensitivity
wet method magnetic particle inspection. It may be suspended in either a
petroleum-based vehicle (oil) such as MAGNAFLUX/MAGNAGLO Carrier
II, or in water. When water is used as a vehicle, conditioning agents such as
WA-2B, or WA-4 are required.
(to be mixed with Carrier II or water/additives)
Suspension: Water/Oil
Recommended Concentration: 1/2 oz./gallon (1.25 grams/liter)
PartNo
MAGFLU 01-0130-71
MAGFLU 01-0130-69
MAGFLU 01-0130-57
Description
Six Pack of 1 lb Containers
10 lb Container
20 lb Container
14AM Fluorescent Premix with Carrier II
Fluorescent prepared bath of 14A powder and Carrier II (a high flash point
petroleum vehicle). Ready to use without measuring and mixing.
Suspension: Oil
Recommended Concentration: Comes as a prepared bath
PartNo
MAGFLU 01-0145-68
MAGFLU 01-0145-78
MAGFLU 01-0145-40
Description
Case of 12 - 12 oz Aerosol
Case of 12 - 16 oz Aerosol
5 Gallon Pail
7C Black Visible Particles
Non-Fluorescent black magnetic particles. Provides excellent color contrast
on shiny or light colored surfaces.
Recommended Concentration: 1-1/2 oz./gallon (9.36 grams/liter)
PartNo
MAGFLU 01-1116-66
Description
8 lb Container
9C Red Visible Particles
PartNo
MAGFLU 01-5960-48
Description
PORTABLE KIT (12-OZ.)
Magnaflux SK-S Spotcheck® General Purpose
Kit (12 Oz.)
PartNo
MAGFLU 01-0132-66
Description
8 lb Container
Magnaflux Carrier II Oil Vehicle
Suspension Vehicle formulated for magnetic particle testing; odor-free, lowviscosity, high flash point.
PartNo
MAGFLU 01-2122-40
MAGFLU 01-2122-30
MAGFLU 01-2122-45
Description
CARRIER II OIL VEHICLE 5 GAL. PAIL
CARRIER II OIL VEHICLE 20 GAL. DRUM
CARRIER II OIL VEHICLE 55 GAL. DRUM
Container Size:
5 Gallon Pail
20 Gallon Drum
55 Gallon Drum
Dry Magnetic Particle Inspection
Magnaflux #1 Gray General Purpose Magnetic
Particles
General Purpose Dry Method Particles. Choose the color that offers the best
contrast to be surface you are inspecting.
Includes: 2 cans of SKL-SP1, 2 cans of SKD-52 and 4 cans of SKC-S. Plus
Plastic Carrying Case, Wiping Cloths, Wire Brush and Instructions.
PartNo
MAGFLU 01-5912-48
Description
12-OZ. KIT
Phone: 402-455-6151
Toll Free: 800-488-9699
785
PartNo
MAGFLU 01-1716-72
MAGFLU 01-1716-69
MAGFLU 01-1716-81
MAGFLU 01-1716-87
MAGFLU 01-1748-98
Description
#1 GRAY MAG PARTICLE 12 - 1LB. CONTAINERS
#1 GRAY MAG PARTICLE 10-LB. PAIL
#1 GRAY MAG PARTICLE 25 LB. PAIL
#1 GRAY MAG PARTICLE 45 LB. PAIL
#1 GRAY MAG PARTICLE 500# DRUMS
MRO Supplies
Includes: 1 can of SKL-SP1, 2 cans of SKC-S, 1 can of SKD-S2, Heavy Duty
Wiping Cloth, Paint Marker, Scrubs Hand Towels, Portable Plastic Case and
Instructions.
Non-Fluorescent red magnetic particles. Similar to 7C but preferred for good
contrast on gray, black or dark surfaces.
Recommended Concentration: 1-1/2 oz./gallon (9.36 grams/liter)
Dry Magnetic Particle Inspection
Magnaflux #2 Yellow General Purpose
Magnetic Particles
contrast to the surface you are inspecting.
PartNo
MAGFLU 01-1732-69
MAGFLU 01-1732-81
MAGFLU 01-1732-87
Description
#2 YELLOW MAG PARTICLE 10# PAIL
Magnaflux #3A Black General Purpose
Magnetic Particles
PartNo
MAGFLU 01-1748-72
MAGFLU 01-1748-69
MAGFLU 01-1748-81
MAGFLU 01-1748-87
Description
#3A BLACK MAG PARTICLE 1# CONTAINER
#3A BLACK MAG PARTICLE 10 LB. PAIL
#3A BLACK MAG PARTICLE 25# PAIL
#3A BLACK MAG PARTICLE 25# PAIL
PartNo
MAGFLU 50650
Description
L-10 COIL KIT
MAGFLU 45293
NON-FLUORESCENT
MATERIALS KIT
MAGFLU 69360-11
STANDARD MAG KIT
MAGFLU 600090
MAGNAGLO® Fluorescent Kit
Includes:
L-10 Coil (115 Volt - 50/60 hz) and
Nonfluorescent Kit P/N 45293
1 lb. of #1 Gray, #3A Black and #8A Powder, 1
aerosol can of 7HF, 9CM and WCP-2, Powder
Bulb, Field indicator, 2 cans SKC-5, Instructions.
39 Inch Head Opening, 11 Inch Coil (#69420)
and Separate Power Supply (Must purchase
either P-70 or P 1500 Portable Power Pack to
energize the MAG Kit). NOTE: Custom built
systems can be designed for customer. Call for
more information.
ZB100F Blacklight (Note voltage on order), 4
aerosol cans of 14AM (Wet Method, Fluorescent
Premix of 14A Magnetic Powder and Carrier II
oIl Petroleum Vehicle), Paint Marker,
SCRUBS™ Hand Cleaner, Wiping Cloth and
Instructions.
Black Lights-Demagnetizers & Misc.
Magnaflux ZB-100F Hand-Held, Fan-Cooled
Black Light
Magnaflux #8A Red General Purpose Magnetic
Particles
PartNo
MAGFLU 01-1780-72
MAGFLU 01-1780-69
MAGFLU 01-1780-81
MAGFLU 01-1780-87
Description
#8A RED MAG PARTICLE 1-LB.
#8A RED MAG PARTICLE 10#
#8A REG MAG PARTICLE 25# PAIL
#8A RED MAG PARTICLE 45# PAIL
Mag Kits
Magnaflux Magnetizing Yoke and Coil Kits
PartNo
MAGFLU 600004
MAGFLU 600005
MAGFLU 600076
MAGFLU 600068
Description
ZB-100F BLACK LIGHT w/ carrier/stand
ZB-100F BLACK LIGHT
ZB-100F BLACK LIGHT w/ carrier/stand
Carrier/stand for ZB-100F BLACK LIGHT
Voltage
115v/60 Hz/1ph
115v/60 Hz/1ph
230/50-60/1ph
MRO Supplies
Magnaflux ZB-100 Black Light
Designed for one-person portable magnetic particle inspections of ferrous
parts. Ideal for inspection of welds and other remote testing. Articulating,
double-jointed legs of yokes contour to any part shape to assure good contact
and lightweight coild makes handling easy.
Includes: Y-6 Yoke, 1lb. of #1 Gray Dry Powser, 1 lb. of #8A Red Dry
Powder, 4-Packets of Scrubs™, Powder Spray Bulb, Paint Marker, Wiping
Cloth and Instructions. NEW - One Year Warranty.
PartNo
MAGFLU 45291
MAGFLU 45292
Description
115V Y-6 AC YOKE KIT
230V Y-6 AC YOKE KIT
MAGFLU 43509
MAGFLU 620741
115V Y-7 AC/DC YOKE KIT
230V Y-7 AC/DC YOKE KIT
MAGFLU 611710
Includes:
Y-6 Yoke, 1lb. of #1 Gray Dry Powser, 1 lb. of
#8A Red Dry Powder, 4-Packets of Scrubs™,
Powder Spray Bulb, Paint Marker, Wiping Cloth
and Instructions. NEW - One Year Warranty.
Y-7 Yoke, 1 lb. of #1 Gray Dry Powder, 1 lb. of
#8A Red Dry Powder, 4-Packs of Scrubs™,
Powder Spray Bulb, Paint Marker, Wiping Cloth
and Instructions. NEW - ONE YEAR
WARRANTY
Y-8 BATTERY POWERED YOKE Battery Powered Yoke, Case, Charger and 1 lb.
KIT
of #1 Gray Powder, Powder Spray Bulb, Paint
Marker, Scrubs™, Wiping Cloth and
Instructions. NEW - ONE YEAR WARRANTY.
Phone: 402-455-6151
Toll Free: 800-488-9699
786
• 100 watt, hand-held model includes transformer, cords, GFCI and plug.
• 115v 60 hz
• Typical intensity @15" (38 cm): 4300 Microwatts/cm²
• Plastic Air-Flo™ Bezel protects operators from burns
(Case does NOT fit ZB-100F)
PartNo
MAGFLU 600000
MAGFLU 600001
MAGFLU 600002
MAGFLU 600003
MAGFLU 047685
Description
ZB-100 BLACK LIGHT
ZB-100 BLACK LIGHT
ZB-100 BLACK LIGHT
ZB-100 BLACK LIGHT
Carrying Case for ZB-100
Voltage
115v/60 Hz/1ph
230v/60 Hz/1ph
230v/50 Hz/1ph
115v/50 Hz/1ph
Black Lights-Demagnetizers & Misc.
Magnaflux ZB-100F MB - Mag Shot Black Light
Magnaflux Field Indicators
• Rugged, pocket-size meter used to indicate residual magnetism remaining in
part after demagnetization.
• Inexpensive unit cannot be recalibrated.
PartNo
MAGFLU 2480
Description
FIELD INDICATOR
Magnaflux 20 Gauss Calibrated Indicator
We have taken our ZB-100F Fan-Cooled black light and added the
convenience of energizing your Power Packs or Wet Benches REMOTELY,
when checking for cracks in extra long parts.
Our ZB-100F MB has a remote button integrated into the handle of the black
light to eliminate the need to continuously return to the MPI Unit to initiate a
mag shot.
PartNo
MAGFLU 600086
Description
ZB-100F MB BLACK LIGHT
MAGFLU 197251
S-66 DEMAGNETIZER
Magnaflux S-1212 Demagnetizer
Description
20 GAUSS CALIBRATED INDICATOR
Voltage
115v/50-60
Hz/1ph
Specify 230 or
460 V
• Offers highly accurate measurement of residual leakage field in parts after
demagnetization.
• Accurate to ±0.3 gauss. Scale range of 10-0-10.
PartNo
MAGFLU 505056
Description
10 GAUSS CALIBRATED INDICATOR
Magnaflux Powder Spray Bulb
The S-1212 Demagnetizer is a fast, effective, dependable piece of
• Lightweight, easy-to-use spray bulb for applying MAGNAFLUX dry
demagnetization equipment. This equipment is created specifically for volume
powders.
demagnetizing of small parts on a production line. The S-1212 has a larger
• Cap removes for easy filling.
opening than the S-66, allowing for larger parts to be demagnetized.
PartNo
MAGFLU 197260
Description
S-1212 DEMAGNETIZER
Phone: 402-455-6151
Toll Free: 800-488-9699
Voltage
Specify 230 or
460 V
787
PartNo
MAGFLU 501232
Description
POWDER SPRAY BULB
MRO Supplies
The S-66 Demagnetizer is a fast, effective, dependable piece of demag
equipment. This equipment is created specifically for volume demagnetizing
of small parts on a production line.
Description
S-66 DEMAGNETIZER
PartNo
MAGFLU 105645
Magnaflux 10 Gauss Calibrated Indicator
Magnaflux S-66 Demagnetizer
PartNo
MAGFLU 197250
• Accurate to ±0.5 gauss. Scale range of 20-0-20.
Ventilation Equipment
TPI Belt Drive Portable Blower - Standard
TPI Air Curtains - Heavy Duty Units - For
Doorways Up To 12’ High
MRO Supplies
•Powder coated 20 gallon steel housing has front and rear roll formed
embossments for added strength and rigidity
•Swivel model rotates 360° in 12.5° increments and locks in place with a steel
locking pin
•10 inch hard rubber wheels
•External junction boxes on dual voltage models allow units to be wired for
either voltage without removing guards
•Cabinet: Constructed of 20 gauge rigid steel with powder coated epoxy paint •Hazardous Location Models have explosion proof motors and external
for durability
junction boxes rated for Class I, Group D and Class II, Groups E, F and G
•Discharge Vanes: Extends the entire width of the unit and are adjustable for •Meets OSHA standards
optimum performances of air flow
•UL listed
•Motors: Heavy duty, PSC, direct drive high efficiency and designed for use •1 year limited warranty
with SCR controllers
•Size - 36 inch, 42 inch and 48 inch
•3/4 HP 115V motors permanently lubricated for long life and have thermal
•Motor - 1-speed, permanently lubricated ball bearing
over load protection
•Switch - Rocker on 115V 1 Phase models
•Quick disconnects supplied to accommodate easy installation and service of •Cord - SJT type 3 conductor, 15 feet long on 115V 1 Phase models, no cords
motor
on dual voltage models
•SCR Seed Controller: Supplied on all units compatible with the motor with a •Blade - Steel on ODP models, aluminum on Hazardous Location Models
low end adjustment for air volume control and savings in power consumption •Guards - Spiral wire - front and rear
•Helps control power consumption during peak heating and air conditioning
PartNo
Description
Amps
Motor HP
CFM
seasons
TPI PB 36-B
36" 115V STATIONARY BLOWER
8.0
1/2
14500
TPI PB 42-B
42" 1 HP STATIONARY BLOWER
11.0
3/4
18200
•Pest control in food service areas
TPI PB 48-B
48" ODP STATIONARY BLOWER
15.0
1
22700
•Control of dirt and airborne contaminates •Thermal barriers
PartNo
Description
TPI CFHD36
TPI CFHD48
TPI CFHD60
36" AIR CURTAIN
48" AIR CURTAIN
60" AIR CURTAIN
Ft./Min.
Hi-LO
3288/1120
4256/929
4256/924
Amps
HI-LO
4.4/4.3
5.9/4.8
5.2/4.4
Watts
HI-LO
603/192
586/168
708/172
TPI PB 36-B-3
TPI PB 42-B-3
TPI PB 48-B-3
36" 230/460 V 3HP STATIONARY
BLOWER
BLOWER
BLOWER
2.3/1.1
1/2
14500
3.3/1.5
3/4
18200
3.8/1.9
1
22700
Visit Us At
www.johnday.com
Your Midwest
Distributor for
over 96 Years
Phone: 402-455-6151
Toll Free: 800-488-9699
800-488-9699 or visit
www.johnday.com
788
TPI Heavy Duty Air Circulator
TPI Industrial Floor Fan
•Fan head tilts 360° for pinpoint air delivery
•Rugged and long wearing all metal construction
•Motor is dependable 3-speed, 1 phase, 115V ball bearing totally enclosed
permanently lubricated
•Rotary switch
•Aluminum blade has a steel hub
•Safety guards are double locking
•Cord is SJT type 3 conductor, 10'L. Rolls on 5 inch hard rubber wheels
•Meets OSHA standards
•UL listed
•1 Yr limited warranty
PartNo
TPI F-12-TE
TPI F-18-TE
TPI F-18H-TE
Description
12" FLOOR FAN
18" FLOOR FAN
18" FAN WITH HIGH STAND
CFM High
2750
5750
5750
Amps (High)
1.1
2.2
2.2
•Safety yellow powder coated motor, guards and mounts
•Factory assembled and tested fan head (motor-blade-guard) shipped in one
carton with mount in a separate carton
•Available in Pedestal Mount (shown)
•Also available in Wall, I-Beam & Ceiling Mount
•Meets OSHA standards, UL listed
•Motor - 2-speed 1/2 HP, 1 phase 115V ball bearing, totally enclosed
•Pull chain switch
•5 year limited warranty
PartNo
TPI HD 24-P
TPI HD 24-W
TPI HD 24-I
TPI HD 24-C
TPI HD 30-P
TPI HD 30-W
TPI HD 30-I
TPI HD 30-C
Description
24" HD FAN, PEDESTAL MOUNT
24" HD FAN, WALL MOUNT
24" HD FAN, I-BEAM MOUNT
24" HD FAN, CEILING MOUNT
30" HD FAN, PEDESTAL MOUNT
30" HD FAN, WALL MOUNT
30" HD FAN, I-BEAM MOUNT
30" HD FAN, CEILING MOUNT
Fan Head
HDH 24
HDH 24
HDH 24
HDH 24
HDH 30
HDH 30
HDH 30
HDH 30
Mount
HDM-P
HDM-W
HDM-I
HDM-C
HDM-P
HDM-W
HDM-I
HDM-C
TPI Industrial High Performance Air Circulator
- 30 Inch
•Easily move this floor fan where it's needed
•Powder coated 20 gallon steel housing has front and rear roll formed
embossments for added strength and rigidity
•Motor is dependable 2-speed, 1 phase, 115V ball bearing open drip proof
permanently lubricated permanent split capacitor
•Rocker switch
•Steel blade
•Safety guards are spiral wire front and rear
•Cord is SJT type 3 conductor, 15 feet long
•Rolls easily on 8 inch hard rubber wheels
•Meets OSHA standards
•UL listed
•High performance 1/3 HP motor runs 15% to 18% cooler than standard 1/4
HP motors and allows fan to continue operating in air temperatures up to
135°F
•Motor: 2-speed, 1/3 HP, 1 PH, 115V ball bearing, totally enclosed
•Switch: Pull chain
•Cord: SJT type 3 conductor, 18' long
•Blade: Steel hub/spider aluminum paddles
•Adjustable column (4-1/2' to 7') bolts to 27" diameter steel dome base with 5
carriage bolts
MRO Supplies
TPI Direct Drive Portable Blower - Standard
and Swivel
PartNo
Description
TPI PBS 36-D
TPI PB 42-D
TPI PBS 42-D
TPI PB 36-D
36" SWIVEL BLOWER
42" STATIONARY BLOWER
42" SWIVEL BLOWER
36" STATIONARY BLOWER
Phone: 402-455-6151
Toll Free: 800-488-9699
CFM Low CFM High Motor HP
9000
15600
15600
9000
12500
15600
15600
12500
1/3
1/2
1/2
1/3
Amps
(High)
5.6
7.9
7.9
5.6
789
PartNo
TPI IHP 30-P
TPI IHP 30-W
TPI IHP 30-I
TPI IHP 30-C
Description
30" HI PERF FAN, PEDESTAL MOUNT
30" HI PERF FAN, WALL MOUNT
30" HI PERF FAN, I-BEAM MOUNT
30" HI PERF FAN, CEILING MOUNT
Blade Size In.
30"
30"
30"
30"
CFM High
8200
8200
8200
8200
TPI Standard Industrial Air Circulator - 30 and
24 Inch
TPI Pipe Mount Adapter for Work Station Fan
PartNo
TPI PM-1
TPI PM-1.5
TPI PM-2
TPI PM-2.5
TPI PM-3
Description
PM-1 - 1" Pipe Dia
PM-1.5 - 1-1/2" Pipe Dia
PM-2 - 2" Pipe Dia
PM-2.5 - 2-1/2" Pipe Dia
PM-3 - 3" Pipe Dia
Electrical Products
Extension Cords
Coleman Cable Tri-Source 3 Way,
Hi-Visibility Blue Extension Cords
•Adjustable column (4-1/2' to 7') bolts to 27" diameter steel dome base with 5
carriage bolts
•Motor: 2-speed, 1/4 HP, 1 PH, 115V ball bearing, totally enclosed
•Blade: Steel hub/spider aluminum paddles
•UPS-able Single Pack
PartNo
TPI ACU 24-P
TPI ACU 30-P
TPI ACU 24-W
TPI ACU 30-W
TPI ACU 24-I
TPI ACU 30-I
TPI ACU 24-C
TPI ACU 30-C
Description
24" STD PEDESTAL FAN
30" STD PEDESTAL FAN
24" STD WALL MOUNT FAN
30" STD WALL MOUNT FAN
24" STD I-BEAM MOUNT FAN
30" STD I-BEAM MOUNT FAN
24" STD CEILING MOUNT FAN
30" STD CEILING MOUNT FAN
CFM High
6800
7900
6800
7900
6800
7900
6800
7900
TPI Work Station Fan
High-Visibility, safety blue cord is easily identified on the job site. Coleman
Cable's new vinyl compound provides super-flexibility at all temperatures
down to -45°F. Clear, waterproof molded ends with a power indicator light in
the female connector "Lets You Know Where the Power Is."
PartNo
Description
COLEMAN 04168
COLEMAN 04169
COLEMAN 03267
COLEMAN 03268
50’ 12/3 TRI-TAP EXT CORD
Wire
GA/Cond.
12/3
12/3
14/3
14/3
Wire Type 125V Rating
SJTW
SJTW
SJTW
SJTW
15A
15A
15A
15A
MRO Supplies
Coleman Cable Three Conductor Round
Orange Vinyl Extension Cord – 300V
UL Listed - Meets OSHA requirements for outdoor use. Vinyl insulation
resists oil, grease, moisture, abrasion and prolonged exposure to sunlight.
•Mount with one bolt or lag screw to walls, ceilings, work benches, machines Heavy duty molded-on plugs and connectors.
or any surface
•Fan head rotates 360° in both the horizontal and vertical direction
•Motor: 3-speed, 1 PH, 115V, sleeve bearing permanently lubricated, totally
enclosed
PartNo
Description
Wire
Wire Type 125V Rating
GA/Cond.
COLEMAN 02304
10’ 16/3 HD EXTENSION CORD
16/3
SJTW
13A
•Blade: Aluminum
COLEMAN 02307
16/3
SJTW
13A
COLEMAN 02308
16/3
SJTW
13A
•Guards: Double locking chrome plated
COLEMAN 02407
14/3
SJTW
15A
•Meets OSHA standards, UL listed, 1 year limited warranty
PartNo
Description
TPI U-12-TE
TPI U-18-TE
12" UTILITY CIRCULATOR
18" UTILITY CIRCULATOR
Phone: 402-455-6151
Toll Free: 800-488-9699
Motor Speed
HP
1/12
1/8
CFM High
2750
5750
790
COLEMAN 02408
COLEMAN 02507
COLEMAN 02508
COLEMAN 02509
14/3
12/3
12/3
12/3
SJTW
SJTW
SJTW
SJTW
15A
15A
15A
15A
Electrical Products
Coleman Cable Portable Clamp-On Light
Extension Cords
Coleman Cable Polar/Solar Plus® Three-Way
Yellow Extension Cord
•U.S. Wire clamp-on lights are great for use around the home, shop and office
•These versatile utility lamps have polished aluminum reflectors, on/off push
through switches and polarized molded-on plugs
•Brooder/Heat lamps are ideal temporary heat sources for chicken and pig
brooders
UL Listed - Meet OSHA Specifications. Includes protective covers for unused •Socket is insulated porcelain, flexible heavy gauge cord with molded-on plug
outlets. Features a power indicator light.
Color - Yellow
PartNo
Description
Reflector Dia.
Watts
PartNo
Description
COLEMAN 03487
COLEMAN 03488
COLEMAN 03489
25’ 12/3 YELLOW TRI-TAP
Wire
GA/Cond.
12/3
12/3
12/3
Wire Type 125V Rating COLEMAN 05932-00-57
SJEOW
SJEOW
SJEOW
15A
15A
15A
6’ CLAMP LIGHT
Flashlights
Streamlight 3C LED
In.
8-1/2
150W
Lighting
Coleman Cable Trouble Light with Outlet
Streamlight® offers a complete line of high performance flashlights.
Streamlight® Flashlights Features: Unbreakable casing. Corrosion proof &
shock resistant.
All units are backed by Streamlights' Lifetime Warranty.
Streamlight® is recognized around the world as the leading provider of
premium lighting solutions.®
Heroes Trust Streamlight™
PartNo
COLEMAN 05427-88-03
COLEMAN 05428-88-03
Description
25’ 16/3 TROUBLE LIGHT
50’ 16/3 TROUBLE LIGHT
PartNo
STREAM 33202
GA/Cond.
16/3
16/3
125V Rating
13A
13A
Description
3C LED STREAMLIGHT YELLOW
Streamlight 3C Xenon
Coleman Cable Luma-Site® Retractable Cord
Reel Worklight
Waterproof, non-conductive polymer flashlight with clip. Features tailcap "onoff" switching and Xenon bulb. Uses 3 C alkaline batteries, not included.
PartNo
STREAM 33250
•Cool, glare-free light that is energy efficient
•Uses 13 watt twin tube compact fluorescent bulb with shatter-resistant clear
plastic sleeve, 360° rotation hanging hook
•On/Off switch on handle, three conductor plug-in ballast
PartNo
COLEMAN 05570-88-08
COLEMAN 05937-88-04
Description
30’ RETR TROUBLE LIGHT
40’ FLUORESCENT RETR WORKLIGHT
Phone: 402-455-6151
Toll Free: 800-488-9699
GA/Cond.
16/3
16/3
125V Rating
10A
N/A
791
Description
3C XENON STREAMLIGHT YELLOW
Streamlight TT-3C LED Tasklight
100,000 hr. LED, water resistant, O-ring seals, adjust focus. Knurled grip,
lanyard. Uses 3 C alkaline batteries, not included.
PartNo
STREAM 51012
STREAM 51002
Description
TT-3C TITANIUM LED TASKLIGHT
TT-3C BLACK LED TASKLIGHT
MRO Supplies
Waterproof, non-conductive polymer flashlight with clip. Features 10 white
LEDs. Tailcap "on-off" switching. Uses 3 C alkaline batteries, not included.
•Deluxe trouble light with grounded outlet on handle
•Bulb cage is white colored plastic with swivel hook
•Grounded outlet on handle
•Orange cord
Electrical Products
Streamlight 4AA Xenon
Lighting
Flashlights
Streamlight Stylus® LED Penlight
Waterproof, ultra slim LED penlight lasts up to 100,000 hours. Included Glare
Guard and 3 AAAA alkaline batteries. Serialized for easy identifaction.
Compact, waterproof, non-conductive polymer flashlight. Features tailcap "onMomentary blink and constant on modes.
off" switching and Xenon bulb. Uses 4 AA alkaline batteries.
PartNo
Description
STREAM 65018
STREAM 65030
STYLUS LED PENLIGHT
AAAA BATTERY
PartNo
STREAM 68254
Rayovac® Industrial™ Flashlights and
Lanterns
Streamlight Stylus Reach® LED Penlight
MRO Supplies
Industrial Flashlights
Waterproof, ultra slim penlight with flexible cable extension gets deep into
the tightest spost. Unbreakable 100,000 hour LED never needs replacing and
is available in white or blue. Included Glare Guard and 3 AAAA alkaline
batteries. Aircraft aluminum casing and tough PVC shielded cable is built to
illuminate unforgiving, hard-to-reach areas. 7" cable extention allows for 14"
reach.
PartNo
STREAM 65618
Description
STYLUS REACH LED PENLIGHT
Streamlight 4AA LED
PartNo
RAYCOR ILJ2AA-B
RAYCOR ISL2D-B
RAYCOR ISL4D-B
RAYCOR IN2-CT
RAYCOR IN2-MS
RAYCOR IN3-MS
RAYCOR IN2
RAYCOR IN2-KML
RAYCOR IN3
RAYCOR IN4
RAYCOR I6V-B4
RAYCOR KFL
Roughneck Xtreme®
RAYCOR R2D
RAYCOR R3D
RAYCOR IV2D
RAYCOR IV2DM
RAYCOR PD-1
Compact, waterproof, non-conductive polymer flashlight. Features 7 white
LEDs and tailcap "on-off" switching. Uses 4 AA alkaline batteries.
Description
4AA LED STREAMLIGHT YELLOW
Phone: 402-455-6151
Toll Free: 800-488-9699
792
Description
IND 2 AA SIZE SWIVEL-LITE W/BATT.
IND 2 D SIZE SWIVEL-LITE W/BATT.
IND 4 D SIZE SWIVEL-LANTERN
IND W/ CONTINUITY TESTER
3 D SIZE ORANGE SAFETY FLASHLIGHT
3 D SIZE ORANGE SAFETY FLASHLIGHT
IND 2 D SIZE W/PR2 BULB & RING HGR
IND 2 D SIZE W/KRYPTON BULB,MAG&RING
HGR
IND 3 D SIZE W/PR3 BULB & RING HGR
IND 2 AA SIZE W/PR4 BULB & RING HGR
IND 6V LANTERN W/KRYPTON BULB & HVY
DUTY LANTERN BATT
KRYPTON LANTERN W/STAND
Approved
UL & MSHA
UL & MSHA
Rayovac® Industrial™ Performance Lights
PartNo
RAYCOR R2AA-BA
PartNo
STREAM 68202
Description
4AA XENON STREAMLIGHT YELLOW
Description
2 CELL AA ROUGHNECK FLASHLT W/2 AA ALKALINE
BATT
2 CELL D ROUGHNECK FLASHLIGHT
3 CELL D ROUGHNECK FLASHLT
YELLOW 2 D SIZE UTILITY FLASHLT
YELLOW 2 D SIZE UTIL FLSHLT W/MAG
2 AAA ALKALINE DISPOSABLE PENLITE
Log-on to www.johnday.com
For Pricing and Product Information
Electrical Products
Rayovac® Sportsman Grip-Clip LED Light
Lighting
Flashlights
Rayovac® New! Sportsman 3N1 LED
Flashlight
•NEW TECHNOLOGY LED System
- Super White LED Bulb
•Batteries last 20 times longer with high efficiency LED bulb - 200 Hr
runtime
- Bulb lasts a lifetime, never replace
•Unique removable Grip-Clip for hands-free use and push-button switch
•Waterproof "O" ring sealed design
•EZ change battery module
•Lifetime warranty
•Batteries not included
Case of 4
•The flashlight version of Rayovac's best-selling 3 in 1 headlight
•3 switch settings
- In LED mode, batteries last 20 times longer vs. standard bulb
- Never replace bulb - won't crack or break
- LED bulb lasts 100,000 hours - a lifetime
•Weatherproof - withstands the elements
•Includes 3AA Alkaline batts
•Super tough construction
Case of 4
PartNo
RAYCOR SP3N1LED-B
PartNo
RAYCOR SPLED3AAA
Description
FLASHLIGHT,SPORTSMAN LED
Rayovac® Electronic Batteries, Bulbs &
Accessories
Description
SPORTSMAN 3N1 LED FLASHLIGHT
Batteries
Rayovac® Alkaline Maximum™ Industrial
Batteries
Rayovac® Sportsman LED Head-Lite –
Hands-Free
MRO Supplies
•NEW TECHNOLOGY Unique 3-Way Hands-Free LED System
- Close range use - Super White LED
- "Night vision" - 2 Super Red LED
- Long range beam - Krypton Beam
•Batteries last 20 times longer with LED bulbs than normal bulbs - never
break
•Rubber spot-flood reflector, head rotates 180°, compact design, comfort-grip
band
•Weatherproof, heavy duty construction
•Lifetime warranty
Case of 4
PartNo
RAYCOR SPHLTLED
Description
SPORTSMAN LED FLASHLIGHT
Phone: 402-455-6151
Toll Free: 800-488-9699
793
•Formulated specifically to exceed the everyday demands of tough industrial
applications
•Available in Alkaline, Heavy Duty, General Purpose, and Rechargeable
•Guaranteed against leakage
•With longer storage life, up to five years for Alkaline and four years for
Heavy Duty
•Containing the industry's ultra low mercury content
PartNo
RAYCOR AL-D
RAYCOR AL-C
RAYCOR AL-AA
RAYCOR AL-AAA
RAYCOR AL-9V
Description
D SIZE ALKALINE BATTERY
C ALKALINE BATTERY
AA ALKALINE BATTERY
AAA ALKALINE BATTERY
9V ALKALINE BATTERY
Rayovac® Electronic Batteries, Bulbs & Rayovac® Watch/Calculator Carded Batteries
Accessories
Batteries
Rayovac® Lantern Batteries
Quality and dependability have made Rayovac the unquestioned leader in
hearing aid batteries worldwide. Pretested and guaranteed watch and
calculator batteries from Rayovac deliver long life. Our wide range of silver
and lithium button cells satisfies many consumer applications. One Per Card.
•Dependable performance for "must work" applications
•Better for the environment, mercury and cadmium-free formula
•Longer storage life
•Spring terminals
•Date-coded packaging
PartNo
Description
RAYCOR 6V-HD
RAYCOR 6V-GP
BATTERY,LANTERN,6V HVY DUTY
6-V GENERAL PURP LANTERN BATT
PartNo
RAYCOR 301/386-1W
RAYCOR 303/357-1W
RAYCOR 309/393-1W
Bulbs
Rayovac® Bulbs and Accessories
Terminal Type
Voltage
Spring
Spring
6V
6V
Rayovac® Hearing Aid Batteries
MRO Supplies
Description
1.55 VOLT ELEC BATTERY-SILVER
1.55 VOLT ELEC BATTERY-SILVER
1 VOLT ELEC BATTERY-SILVER
The Rayovac line includes a full selection of replacement bulbs and
accessories. We feature our brighter and whiter krypton bulbs. Pioneered by
Rayovac, krypton bulbs quickly became an industry standard. Today, we are
again leading the industry with improved 100% brighter krypton bulbs.
PartNo
RAYCOR K1-2
RAYCOR K2-2
RAYCOR PR2
RAYCOR PR2-2
RAYCOR PR3
RAYCOR PR3-2
RAYCOR PR4
RAYCOR PR4-2
RAYCOR PR6
Description
KRYPTON 2CELL C LAMP,FLG BASE,2/CARD
KRYPTON 2CELL D LAMP,FLG BASE,2/CARD
FOR 2CELL D REG BATT,FLG BASE
FOR 2CELL D REG BATT,FLG BASE,2/CARD
FOR 3CELL D REG BATT,FLG BASE
FOR 3CELL D REG BATT,FLG BASE,2/CARD
FOR 2CELL C REG BATT,FLG BASE
FOR 2CELL C REG BATT,FLG BASE,2/CARD
FOR 2CELL D IND BATT,FLG BASE
Contractor Supplies
Scoops
True Temper® Grain Scoops
Quality and dependability have made Rayovac the unquestioned leader in
hearing aid batteries worldwide. Pretested and guaranteed watch and
calculator batteries from Rayovac deliver long life. Our wide range of silver
and lithium button cells satisfies many consumer applications.
PartNo
RAYCOR L10ZA
RAYCOR L13ZA
RAYCOR L312ZA
RAYCOR L675ZA
Description
FOUR 1.4-VOLT
FOUR 1.4-VOLT
FOUR 1.4-VOLT
FOUR 1.4-VOLT
Aluminum grain scoop. Used for moving and scooping grain, seed, feed &
snow. D Handle-27" Lgth.
PartNo
TRU 1670900
TRU 1681200
TRU 1681400
Blade Dim. In.
14-3/4 x 18
15-1/4 x 19
15-3/4 x 20
True Temper® ABS Grain Scoops
800-488-9699
Plastic grain scoop. Used for moving and scooping grain, seed, feed, & snow.
"D" handle-22" lgth.
PartNo
TRU 1680000
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
ALUM GRAIN SCOOP SZ10-D HDL
794
Description
#12 PLASTIC GRAIN SCOOP
Blade Dim. In.
14-1/4 x 17-3/4
Contractor Supplies
Shovels
True Temper® Scoop Eastern Pattern Shovels
Kodiak brand - prefessional grade tempered steeel blade. 27" handle "D" grip.
PartNo
TRU 1328400
Description
EASTRN PATRN SCOOP, SIZE 2
Blade Size In.
11 x 15
True Temper Steel Coal Shovels
True Temper Pony® Solid Shank Contractor
Shovels
Blade extended tab socket adds strength to handle/socket connection. Doubletapered, forged blade edge for easy entry into soil. 27" "D" handle.
PartNo
TRU 1231100
TRU 1233200
Description
DRAIN SPADE 16"-TURND ST
DRAIN SPADE 47" LONG HANDLE
True Temper Kodiak® Shovels
Blade Size In.
5-1/2 x 16
5-1/2 x 16
Forward-turned step for secure foot placement. Seal coated premium northern
ash handle offers strength and durability. 14-guage, heavy-duty, heat-treated,
tempered-steel blade for strength and durability. Size 2, closed back blade.
High grade Northern Ash handle - 27" lgth. "D" handle grip. Professional
grade tempered steel blade.
PartNo
Description
TRU 1300500
STEEL COAL SHOVEL SIZE 2
Blade Size In. Handle Lgth.
In.
27
13-1/2 x 14-1/2
True Temper® Blue Max™ Shovels
PartNo
TRU 1303500
TRU 1303900
Description
SQ. PT. SHOVEL 47" LG. HDL.
RD. POINT SHOVEL 47" LG. HDL.
Blade Size In.
9-3/4 x 11 5/8
8-3/4 x 11-1/2
True Temper Steel Hollow-Back Shovel
Used as a steel street or snow shovel. High-quality ribbed steel blade for
durability.
PartNo
TRU 1632400
Description
48" LONG HANDLE GP STEEL SHOVEL
Blade Size In.
11 x 13-1/2
True Temper 24-inch Steel Snow Pushers
PartNo
TRU 1691500
TRU 1639300
Description
TRU BMTDR
TRU BMTLR
TRU BMTDS
TRU BMTLS
BLUEMAX DH RP SHVL
BLUEMAX LH RP SHVL
BLUEMAX DH SP SHVL
BLUEMAX LH SP SHVL
Phone: 402-455-6151
Toll Free: 800-488-9699
Blade Size In.
12 x 24
11 x 24
True Temper SuperLight® Aluminum Snow
Shovel
•Rolled step prevents materials from accumulating under blade
•Blades have an onion skin finish and lacquer to reduce buildup
•Wide wood/steel "D" grip fits gloved hand comfortably - durable for
toughest jobs
•Available in long handle also (not pictured)
PartNo
Description
TT 24" STEEL SNOWPUSHER
BRACED PUSHER 24X11 D-HDL
Handle Head/Blade Handle
Shovel
Type
Size In.
Lgth. In. Point Type
D
9 1/2 x 12
30
Round
Long
9 1/2 x 12
48
Round
D
10 x 12
30
Square
Long
10 x 12
48
Square
795
Aluminum shovels have steel wear strips for longer blade life35" "D" handle.
Unique contoured rib design provides added rigidity. Exclusive lock socket is
the deepest in the industry.
PartNo
TRU 1640400
Description
TT ALUM SNOW SHOVEL
Blade Size In.
14-1/2 x 18
MRO Supplies
Thick steel blades are designed for heavy-duty use. Deep handle socket design
for added strength. Steel braced socket increases strength and durability for
1639500.
Contractor Supplies
Shovel Handles
Sequatchie Long Hollowback Shovel Handles
Miscellaneous
True Temper® Heavy Duty Scrapers
With shoulder eye with slot - 9" eye chuck for hollowback.
PartNo
SEQ 870-21
SEQ 880-21
Description
T48H 48" SHOVEL HANDLE
54" SHOVEL HANDLE
Lgth. In.
48
54
Sequatchie Handles For Solid Shank Shovels
And Spades
Scraper, shank pattern. Handle Length 48".
PartNo
TRU 1646300
Description
SHANK DESIGN,BLADE/FERRULE,BLUE
True Temper Garden & Mortar Hoes
Blade Dim. In.
7x6
Tapered on Tool End - without shoulder. Will fit True Temper "Fox" and
"Bulldog" patterns 1 1/2" diameter handle, 4 1/2" eye chuck.
PartNo
SEQ 845-21
SEQ 844-21
SEQ 842-21
Description
T-42 42" SHOVEL HANDLE
T-445 44-1/2" SHOVEL HANDLE
T-48 48" SHOVEL HANDLE
Lgth. In.
42
44-1/2
48
Sequatchie Tubular Steel Dee Shovel Handles
Strong, forged shank with pinned chrome ferrule for strength. Tough, long
hardwood handle. Strong, 1/2" socket pattern for years of service.
PartNo
TRU 1868400
TRU 1868600
TRU 1850100
Description
MORTAR MIXER HOE, PERFORATED 66" HNDL
WELDED MORTAR MIXER HOE 48" HNDL
GARDEN HOE,WELDED 48" HNDL
MRO Supplies
True Temper Manure Forks
Blade Size
10 x 6
6 1/2 x 4
6 1/4 x 3 1/2
Straight - without shoulder. For True Temper "bantam", "Dynolite", "Fox"
and "Bulldog" shovels and spades. 4 1/2" eye chuck.
PartNo
SEQ 807-21
SEQ 829-21
SEQ 938-21
Description
TE-24 24" DEE SHOVEL HDL-STRAIGHT
BEH-30 30" DEE SHOVEL HDL-BENT
30" DEE SHOVEL HDL-STRAIGHT
Wheelbarrows
True Temper Jackson® Contractor
Wheelbarrows
Lgth. In.
24
30
30
Forged evaltines, pringed, tempered. Heavy duty wood handle 54". 2-1/4" tine
spacing.
PartNo
TRU 1823300
Description
5 TINE MANURE FORK 54" HNDL
Fork Specs.
11-1/2 x 9-1/4
True Temper Pinch Point Crow Bar
Heat treated carbon steel.
PartNo
TRU 1160100
PartNo
TRU M6T22BB
TRU M11T22BB
Description
1-1/2" DIA 60" PINCH PT. CROWBAR
Phone: 402-455-6151
Toll Free: 800-488-9699
Contractor wheelbarrow. Folded seamless steel tray with wire reinforced trim
makes the strongest wheelbarrow available. Steel front tray braces, "H" brace,
cross strips and leg stabilizers. 16" wheel assembly with pneumatic tubed 2ply tire with ball bearing. Heavy-duty steel tray braces provide added strength
and support when pouring heavy loads.
796
Description
CONTRACTOR WHEELBARROW
CONTRACTOR WHLBRRW EXTRA HD
Capacity
6 cu. ft.
6 cu. ft.
Contractor Supplies
Ladders
Garden Hoses
True Temper Ames Garden Hoses
Medium-Duty
Louisville Aluminum Extension AE2000 Series
Medium-duty yellow All-Weather garden hose manufactured with
Microban®. Round solid brass female. Crush-proof male. Protective collar.
Ames® hose features built-in Microban® antimicrobial protection to inhibit
the growth of bacteria and fungus that can cause deterioration of the hose.
Micorban® and the Microban® symbol are registered trademarks of the
Microban Products Company. 7 year warranty.
PartNo
TRU 4001300
Description
GARDEN HOSE
Hose ID
5/8"
Length Ft.
50
Our post popular aluminum extension ladder for contractors and industry.
Extra heavy duty I-beam side rails. Designed for a 300 pound workload
(TYPE IA) when set at the proper working angle. Double crimped D-shaped
tempered aluminum rungs. Extra heavy duty cast aluminum swivel safety
shoes. Mar-resistant end caps. QuickLatch™ equipped rung lock. Two section
extension ladders. 16' - 40' lengths.
PartNo
Description
LOULAD AE2216
LOULAD AE2220
LOULAD AE2224
LOULAD AE2228
LOULAD AE2232
16’ ALUMINUM EXT LADDER
Lgth. Each
Section Ft.
8
10
12
14
16
Maximum
Extended
Lgth. Ft.
13
17
21
25
29
Molded Top With Recessed Tray. Nonconductive structural molded top
provides greater impact resistance and durability than aluminum tops. Large
parts tray recessed 1/4" deep with tool slots. Center-Pull Spreader Braces (3
thru 6 ft. only). Unique center-pull spreader brace for easy one-hand
operation. Brace is plated steel for stiffness and durability. Side Rails. Heavy
duty aluminum side rails are full channel extrusions on the front and modified
channel on back legs. Slip Resistant Rubber Feet. Aluminum angle feet with
thick rubber tread on all four legs to provide sure footing. Molded Pail Shelf.
Self-closing, structural molded pail shelf. Skid resistant surface and outer
retaining edge provide additional features. 300 lbs type 1A load capacity. 3"
step size.
Premium lifetime garden hose manufactured with Microban®. Octagonal
heavy-duty crush-proof couplings. Continuous flow tube keeps water flowing
even if kinked. Protective collar. Ames® hose features built-in Microban®
antimicrobial protection to inhibit the growth of bacteria and fungus that can
cause deterioration of the hose. Micorban® and the Microban® symbol are
registered trademarks of the Microban Products Company. Lifetime warranty.
PartNo
TRU 4000100
Description
GARDEN HOSE
Phone: 402-455-6151
Toll Free: 800-488-9699
Hose ID
5/8"
Length Ft.
50
797
**AS3002 is a folding step stand
PartNo
Description
LOULAD AS3002**
LOULAD AS3003
LOULAD AS3004
LOULAD AS3005
LOULAD AS3006
LOULAD AS3008
LOULAD AS3010
2’ ALUM STEP STAND
3’ ALUM STEP LADDER
Bottom Width
17-1/8"
17"
18-1/2"
20"
21-1/2"
24-1/2"
27-1/2"
Approx.
Spread
20"
22"
28"
34"
40"
52"
64"
MRO Supplies
Louisville Aluminum Step Ladder AS3000
Series
Premium-Duty
Contractor Supplies
Ladders
Louisville FE3200 Series Fiberglass Channel
Extension Ladder
MRO Supplies
Full channel nonconductive side rails. Designed for 300 lbs. workload (TYPE
IA). D-Shaped Rungs. Tempered aluminum rungs are fully serrated for a slipresistant surface. Rungs are hydraulically double crimped to side rail with two
heat-treated aluminum discs. Extra heavy duty cast aluminum swivel shoes
with thick rubber tread. Full swivel safety shoe can be used with tread down
or in spike position. QuickLatch™ equipped runglock provides easier method
of securing fly and base sections when extended.
PartNo
Description
LOULAD FE3216
LOULAD FE3220
LOULAD FE3224
LOULAD FE3228
LOULAD FE3232
LOULAD FE3236
LOULAD FE3240
16’FG EXT LADDER 300#
Lgth. Each
Section Ft.
8
10
12
14
16
18
20
Max.
Extended
Lgth. Ft.
13
17
21
25
29
32
35
Extra heavy duty, 300 lbs. rated industrial step ladder (TYPE IA). Molded top
with Handyman's Tool Slots. Rugged, nonconductive structural molded top is
extremely durable. Wide Back Braces. Vertically mounted U-shaped back
braces spaced on one foot intervals provide maximum stiffness and
discourage unsafe climbing. Full Channel Fiberglass Rail. Nonconductive full
channel rails are covered with a polyester veil for years of service without
fiber prominence or blooming. Double-Rivet Step Construction. Each step
secured with six, large headed, semi-tubular steel rivets for maximum
strength.. 30% greater shear strength than solid aluminum rivets. Inside
Spreader Braces. Spreader braces inside fiberglass rails help protect braces
from getting hooked or abused in transit. Reinforced Bottom Back Brace. Slip
Resistant Rubber Feet. Aluminum angle feet with thick rubber tread on all
four legs to provide sure footing.
PartNo
Description
LOULAD FS1504
LOULAD FS1505
LOULAD FS1506
LOULAD FS1508
LOULAD FS1510
LOULAD FS1512
4’FG STEP LADDER 300#
10’FG STEP LADDR 300#
12’FG STEP LADDR 300#
Approx.
Spread In.
28
34
40
52
65
78
Bottom Wdth.
In.
18-7/8
20-3/8
21-7/8
24-7/8
27-7/8
30-7/8
Rhino™ 375 Fiberglass Step Ladder
FS1100HD Series
New 375 lb. rated safety yellow rail (TYPE IAA). Our top-of-the-line
fiberglass step ladder crafted with durable parts. Designed to meet the most
demanding industrial applications. Molded top with tool slots & recessed tray.
Reinforcement plate at top/rail connection. Extra heavy duty full channel
fiberglass rail. Double-rivet step construction. Extra heavy duty 3 inch wide
steps. Pinch resistant inside spreader braces (heavier gauge). Steel gusset back
bracing. Full metal wrap-a-round spreader connection. Full Metal Boot™.
800-488-9699 or visit
www.johnday.com
Your Midwest
Distributor for
over 96 Years
Phone: 402-455-6151
Toll Free: 800-488-9699
Louisville FS1500 Series Advent Fiberglass
Step Ladder
PartNo
Description
LOULAD FS1104HD
LOULAD FS1106HD
LOULAD FS1108HD
LOULAD FS1110HD
LOULAD FS1112HD
4’FG STEPLADDER 375#
Approx.
Spread In.
29
41
54
66
78
800-488-9699
798
Bottom Wdth.
In.
20 1/2
24
27 1/2
31
34 1/2
Contractor Supplies
Poly Film
Polyethylene Film 4 and 6 MIL
Ladders - Articulated
Louisville Ultimate™ Articulated Ladders
This film can be used to protect your buildings, worksites, materials, and
equipment from moisture, rain, snow, and wind. Also ideal for enclosure,
cover, lining, sealed wrap, ground cloth or air-supported structure. Sunresistant black is ideal when security is important. Clear for applications when
visability is needed.
PartNo
Description
POLY 420B
POLY 620B
POLY 632B
POLY 640B
POLY 404C
POLY 408C
POLY 410C
POLY 412C
POLY 416C
POLY 420C
POLY 610C
POLY 612C
POLY 616C
POLY 620C
20’X.004 MIL X100’ BLACK
4’X.004 MIL X100’ CLEAR
8’X,004 MIL X100’ CLEAR
Wdth. x Lgth.
Ft.
20 x 100
20 x 100
32 x 100
40 x 100
4 x 100
8 x 100
10 x 100
12 x 100
16 x 100
20 x 100
10 x 100
12 x 100
16 x 100
20 x 100
Roll Wt.
38.2
57.4
91.9
114
7.64
15.28
19.1
22.92
30.56
38.2
28.7
34.44
45.92
57.4
EasyHinge™: Durable, zinc plated steel hinge that features a positive acting
lever for smooth and consistent locking and unlocking of the ladder sections,
allowing the EasyHinge™ to be positioned at 180, 105 and 40 degree angles. Clear Stretch Film
Comfort: The wide 14" to 23" spacing between the side rails allows a
Standard thickness 15 micron (65 gauge). 20 micron (80 gauge) thickness for
comfortable working space.
heavier, uneven loads. More economical than tape, twine, or strapping. Other
Built In Stabilizer: The unique flared end design provides a 23" wide base for
widths & lengths available.
support. Fiberglass model has a stabilizer bar. Type 1A 300 lbs capacity.
PartNo
Description
PartNo
Description
LOULAD L-2091-17
LOULAD L-2092-13
LOULAD 3091-13
LOULAD L-3091-15
17X93 ALUM ARTICU LDR
13X93 ALUM ARTICU LDR
13X75 FG ARTICU LDR
15X75 FG ARTICU LDR
Hose Nozzles, Faucets
Sherman Barrel Faucets
Stepladder Scaffold Folded Ht. Approx.
Ht.
Ht.
HxL
Cubes
8’5"
52"
54x24x10"
5.15
6’5"
40"
43x23x9"
5.15
6’5"
40"
43x23x9"
5.15
7’5"
52"
54x24x10"
7.5
JDC 161500-65C
JDC 181500-80C
Black Stretch Film
•Wrap pallet loads to ensure safe and secure delivery
•Self-adhering-each layer of film bonds to the next for added strength
•Protects shipments from water, dirt, and damage caused by excess movement
Semi-opaque security film helps to conceal any printing or graphics on
packaging. 20 micron (80 gauge) thickness for heavier, uneven loads.
PartNo
JDC 181500-65B
JDC 181500-80B
Description
106 CAST BRASS BARRL FAUCET
Model No.
106 (3/4 NPT)
PartNo
SHERM 352239
SHERM 352240
Description
8-1 3/4"FPTX6" WTR HOSE NZL
8-3 1"FPTX8" WTR HOSE NZL
Model No.
8-1 (3/4 NH)
8-3 (1 NPSH)
Description
18"X1500’ 65 GAUGE BLACK FILM
18"X1500’ 80 GAUGE BLACK FILM
Tarps
Polyethylene Tarpaulin-Woven Laminated Poly
Sherman Series 8 - Hi-Pressure Hose Nozzle
Tri-Con Hose Nozzle
PartNo
WSM C-125
PartNo
HAWMIS 11004
HAWMIS 11005
HAWMIS 11006
HAWMIS 11008
HAWMIS 11009
HAWMIS 11015
HAWMIS 11027
HAWMIS 11011
HAWMIS 11017
HAWMIS 11019
Description
200 PSI TRI-CON NOZZLE 3/4" GHT
Phone: 402-455-6151
Toll Free: 800-488-9699
This totally waterproof product is constructed of woven strands of
polyethylene film. Rust resistant grommets are spaced on approximately 3'
centers in hem and on each corner. This sturdy light weight material does not
rot or mildew and has a high tear resistance. Standard sizes range from 5' x 7'
thru 50' x 60'. Blue color.
799
Description
6 X 8 POLY TARP
8 X 10 POLY TARP
9 X 12 POLY TARP
10 X 12 POLY TARP
10 X 16 POLY TARP
12 X 16 POLY TARP
12 X 20 POLY TARP
16 X 20 POLY TARP
20 X 20 POLY TARP
24 X 36 POLY TARP
Cut Size Ft.
6x8
8 x 10
9 x 12
10 x 12
10 x 16
12 x 16
12 x 20
16 x 20
20 x 20
24 x 36
MRO Supplies
PartNo
SHERM 350224
16"X1500’ 65 GAUGE FILM
18"X1500’ 80 GAUGE FILM
Contractor Supplies
High Performance Grade
Tarp Anchors
Tarp Anchor and Tie-Down Strap
Totally weather resistant – made of special elastomer that prevents cracking,
Chipping, or peeling. Road resistant – guards against salt, sun, chemicals,
Ozone and diesel fumes. All weather elasticity – stretches easily in winter’s
Cold or summer’s heat.
PartNo
Description
MRD AS-210
MRD AS-215
MRD AS-221
MRD AS-231
MRD AS-241
10" HD TARP STRAP ASSY
Tapes
Strap Only
Lgth.
10"
15"
21"
31"
41"
Strap
Max. Stretch
w/Hooks Strap Only
14"
19"
25"
35"
45"
18"
27"
36"
54"
66"
Duct Tape
General Purpose Grade
Shurtape Duct Tape
200°F maximum temperature rating. 15mm thickness. Poly coated cloth. 8%
elongation. Extra premium, heavy duty; superior strength and tack, withstands
extreme temperature fluctuations. Critical industrial, HVAC, manufactured
housing, asbestos abatement, metal peaning, and as bottom board tape.
PartNo
SHUF PC6572
Premium Grade
Description
2"X60YD WHITE CLOTH TAPE
200°F maximum temperature rating. 13 mm thick. Vinyl coated cloth. 4%
elongation. Premium grade, indoor/outdoor tape; lusterless backing, very high
holding power. Gaffer tape in A/V, TV, photography and motion picture
industries to hold wiring, lighting, stage props and to color code; masking silk
screen frames; packaging.
PartNo
SHUF PC6282
Description
2"X60YD VINYL COATED CLOTH TAPE
Sealing Tape
Utility grade; moderately high tack, rubber-based adhesive. Good adhesion
for packaging, bundling, holding, splicing, tabbing, banding of various
substrates.
PartNo
SHUF CP8334
SHUF CP831
SHUF CP832
SHUF CP661
Description
CP-83, 3/4"X60YD 5.6ml MASKING TAPE
CP-83, 1"X60YD 5.6 ml MASKING TAPE
CP-83, 2"X60YD 5.6 ml MASKING TAPE
CP-66 1"X60YD 5.9MIL MASKING TAPE
MRO Supplies
Shurtape EV57 Electrical Tape
200°F maximum temperature rating. 9 mm thickness. Poly coated. 8%
elongation. General purpose; easy tear. To package, patch, seal, hold, color
code, splice, seam, protect, bundle; HVAC, plumbing, carpet and asbestos
abatement applications.
PartNo
SHUF PC6002
Description
2"X60YD GEN PURP DUCT TAPE
Industrial Grade
Shurtape Duct Tape
This UL listed electrical tape is suitable for use at not more than 600V and not
more than 176°F. Great for maintenance, wire harness applications, and other
general purpose electrical. To splice, insulate and bind wiring harnesses. 7 ml
thickness.
PartNo
SHUF EV5734
SHUF EV571
Description
EV-57, 3/4"X6’ VINYL ELEC TAPE
EV-57, 1"X66’ VINYL ELEC TAPE
Shurtape Carton Sealing Tapes PP Series
PP Series Carton Sealing - Solvent Based
Our premium grade carton sealing tapes feature excellent initial tack and
200°F maximum temperature rating. 11 mm thickness. Poly coated cloth. 8% holding power. Using a solvent-based acrylic adhesive, this line of product
elongation - high tack with good bond strength. Industrial grade; poly/cotton does well in a wide range of temperatures from -20 F to 212 F.
cloth; indoor/outdoor use. Sheet metal and flex duct; to seal cartons, bind
books, repair seats, bundle wires, color code; seal hatch covers and cargo
PartNo
Description
doors in the shipping industry.
SHUF PP8102
PP810, 2"X55YD CLEAR FILM TAPE
PartNo
SHUF PC6182
Description
2"X60YD IND GRADE DUCT TAPE
SHUF PP8103
Contractor Grade
Shurtape Duct Tape
200°F maximum temperature rating. 12 mm thickness. High tack natural
rubber adhesive. Poly coated cloth. 11% elongation. Contractor grade;
excellent stretch and conformability, easy unwind. Demanding HVAC
applications to hold, seal, seam sheet metal and flex duct, exhaust vents,
preformed insulation; industrial use to hold, splice, protect and package.
PartNo
SHUF PC6212
Description
2"X60YD SILVER DUCT TAPE
Phone: 402-455-6151
Toll Free: 800-488-9699
Shurtape Carton Sealing Tapes HP Series
HP Series Carton Sealing - Hot Melt Adhesive Based
High-performance tape for demanding environments. Our packaging tape
meets highest shear strength in the industry. Even in the most demanding
applications, our purpose-built tapes are proven to seal, stick and hold.
PartNo
SHUF HP1002
SHUF HP4002
800
PP810, 3"X110YD CLEAR FILM POLY TAPE
Description
2"X55YD GEN PURP GRD CRTN SEAL TAPE
2"X55YD HI PERF GRD CRTN SEAL TAPE
MIL Thickness
1.6
2.5
Tapes
Irwin Chalk Reels
Sealing Tape
Shurtape Strapping Tape
Strapping tape for your every need. From economy low tensile strength to
premium grade fibre glass re-enforced high tensile. Shuford has the right
product for you.
PartNo
SHUF GS4901
SHUF GS4902
SHUF GS50034
SHUF GS5001
SHUF GS50134
SHUF GS5011
SHUF GS5012
SHUF GS5013
SHUF GS52134
SHUF GS5211
SHUF GS5212
SHUF GS53134
SHUF GS5311
SHUF GS5312
Description
Tinsile Strength
GS-490 1"X60YD REINFRCD STRAP TAPE
Econo-Low 110lb
GS-490 2"X60YD REINFORCED
Econo-Low 110lb
GS-500 3/4"X60YD REINFRCD STRAP TAPE
Econo-Low 110lb
GS-500 1"X60YD REINFORCD
Econo-Low 110lb
GS-501 3/4"X60YD REINFRCD STRAP TAPE
Good-Low 145lb
GS-501 1"X60YD REINFRCD STRAP TAPE
Good-Low 145lb
GS-501 2"X60YD REINFORCED
Good-Low 145lb
GS-501 3"X60YD REINFORCED TAPE
Good-Low 145lb
GS-521 3/4"X60YD STRAPPING TAPE, HI-PERF Better-Med 240lb
GS-521 1"X60YD STRAPPING TAPE, HI-PERF
Better-Med 240lb
GS-5212"X60YD STRAPPING TAPE, HI-PERF
Better-Med 240lb
GS-531 3/4"X60YD STRAPPING TAPE, PREMIUM Prem-High 320lb
GS-531 1"X60YD STRAPPING TAPE, PREMIUM Prem-High 320lb
GS-531 2"X60YD STRAPPING TAPE, PREMIUM Prem-High 320lb
Marking & Layout Tools
Irwin Chalk
•Durable Aluminum Alloy Construction
•Steel plated hook designed for stable anchoring
•Retractable locking handle allows reel to be used as a plumb bob
•Leak-proof side fill opening
•Twisted line holds more chalk for multiple re-strikes
PartNo
IRWIN 63950
IRWIN 64110
IRWIN 64310
IRWIN 64320
Description
50’ METAL CASE CHALK LINE REEL
100’ METAL CASE CHALK LINE REEL
100’ FAST RETRIEVE CHALK REEL
180’ LARGE CAPACITY CHALK REEL
Irwin Chalk Reel Combos For Fast Rewind
Fast retrieve gears for 3 1/2 times faster line retrieval.
PartNo
IRWIN 64494
IRWIN 64495
IRWIN 64497
IRWIN 64498
IRWIN 64499
Description
100’ FAST RET CHALK REEL/4 OZ BLUE
100’ FAST RET CHALK REEL/4 OZ RED
100’ MTL CS CHALK REEL/4OZ FL ORNG
100’ MTL CASE CHALK REEL/4 OZ RED
100’ MTL CASE CHALK REEL/4 OZ BLUE
Irwin Chalk Reel Replacement Lines
Twisted line holds more chalk for multiple re-strikes
PartNo
IRWIN 64550
IRWIN 64610
IRWIN 231400
Description
50’ TWISTED COTTON REPL LINE
Tapes
Flags & Tapes
PartNo
IRWIN 64801
IRWIN 64802
IRWIN 64805
IRWIN 64901
IRWIN 64902
IRWIN 64903
IRWIN 64904
IRWIN 64905
IRWIN 64907
IRWIN 64908
IRWIN 65201
IRWIN 65202
IRWIN 65205
IRWIN 65207
IRWIN 65101
IRWIN 65102
IRWIN 65103
IRWIN 65104
IRWIN 65105
IRWIN 65106
Description
BLUE CHALK REFILL 4 OZ.
RED CHALK REFILL 4 OZ.
FLUOR ORANGE CHALK REFILL 4 OZ.
BLUE CHALK REFILL 8 OZ.
RED CHALK REFILL 8 OZ.
YELLOW CHALK REFILL 8 OZ.
WHITE CHALK REFILL 8 OZ.
FLUOR ORANGE CHALK REFILL 8 OZ.
FLUOR GREEN CHALK REFILL 8 OZ.
JET BLACK CHALK REFILL 8 OZ.
BLUE CHALK REFILL 2.5 LB.
RED CHALK REFILL 2.5 LB.
FLUOR ORANGE CHALK REFILL 2.5 LB.
JET BLACK CHALK REFILL 2.5 LB.
5# BLUE MARKING CHALK
5# RED MARKING CHALK
5# YELLOW MARKING CHALK
5# WHITE MARKING CHALK
5# FLUOR ORANGE MARKING CHALK
5# FLUOR GREEN MARKING CHALK
Phone: 402-455-6151
Toll Free: 800-488-9699
Irwin Flagging Tape
•Weatherproof poly vinyl chloride for harsh outdoor conditions
•Ideal for construction, landscaping, excavating, identification of trees or
hazards, and locating underground cables or pipe
•1-3/16" wide
•Bright, fade-resistant color for maximum visibility
•Constructed of non-adhesive, non-conductive viny.
PartNo
IRWIN 65601
IRWIN 65602
IRWIN 65603
IRWIN 65604
IRWIN 65901
IRWIN 65902
IRWIN 65903
IRWIN 65904
IRWIN 65905
801
Description
150’ FLUORESCENT RED FLAG TAPE
150’ FLUORSNT ORANGE FLAG TAPE
150’ FLUORESCENT PINK FLAG TAPE
150’ FLUORESCENT LIME FLAG TAPE
300’ RED FLAGGING TAPE
300’ ORANGE FLAGGING TAPE
300’ BLUE FLAGGING TAPE
300’ WHITE FLAGGING TAPE
300’ YELLOW FLAGGING TAPE
MRO Supplies
•High visibility chalk for self chalking line reels
•For use on a variety of surfaces including wood, drywall, concrete, stone, and
metal
•Permanent colors, especially black and red, produce long lasting lines that
won't fade
•Temporary colors, especially white and blue, provide high visibility and are
easy to remove
•Proprietary formulations for dark, sharp lines and reliable performance
•Chalk containers are filled by weight, not volume
Flags
Tapes& Tapes
Kimberly-Clark Professional WYPALL® L40
Wipers
WYPALL® Disposable Wiper
Irwin Barrier Tape
America's Favorite Disposable Wiper. Absorbant, soft, great for general
purpose wiping. WYPALL® L40 Wipers are an outstanding general-purpose
wiper featuring a unique DRC base sheet technology.
•Easily absorbs liquids, lubricants, and oils
•Soft enough for use on face and hands
•Setting the standard for general purpose wiping for over 25 years
•"Caution", "Do Not Enter", "Wet Paint", and other.
•Available in 300' and 1000' lengths.
•Weatherproof poly vinyl chloride for harsh outdoor conditions.
•Bright, fade-resistant color for maximum visibility
•Constructed of non-adhesive, non-conductive viny.
PartNo
IRWIN 66200
IRWIN 66200SP
IRWIN 66202
IRWIN 66202SP
IRWIN 66211
IRWIN 66211SP
IRWIN 66222
IRWIN 66222SP
IRWIN 66231
IRWIN 66231SP
Description
"CAUTION" TAPE
"PRECAUTION" TAPE
"DANGER - DO NOT ENTER" TAPE
"PELIGRO - NO PASE" TAPE
"CAUTION - CONSTRUCTION AREA"
PRECAUTN-AREA EN CONSTRUCCION
"WET PAINT"
"PINTURA FRESCA"
"CAUTION"
"PRECAUCION"
Marking Flags
WYPALL® L40 Wipers Grab-A-Rag® Box: One at a time dispensing for
users on the go.
WYPALL® L40 Wipers, 1/4 fold: Ideal for benchtop usage.
PartNo
CARP #5701
CARP #5790
Length
300’ x 3"
300’ x 3"
300’ x 3"
300’ x 3"
1000’ x 3"
1000’ x 3"
300’ x 3"
300’ x 3"
1000’ x 3"
1000’ x 3"
Blackburn Marking Flag
Description
WYPALL 1/4 FOLD WHT 18 PKS OF 56
WYPALL WHT POP-UP 9 BOXES OF 100
Size
12.5" x 14.4"
16.4" x 9.8"
Absorbent Clay
Oil-Dri® Premium Industrial Floor Absorbent
Absorbs and retains oil, water and grease. Great under fork lift traffic.
PartNo
OILDRI 101050-L40
Description
OIL-DRI 50#BAG FLOOR ABSORB
Sweeping Compound
Omaha Hy-Grade Sweeping Compound
Cedar Moss. Color: Red. 15 gal. 100 lbs.
For non-waxed wood and cement floors in stores, offices, factories, buildings
and schools; made with parafine oil kiln dried sawdust and wood fibre;
balanced in weight with silica sand to hug the floor. It is efficient and
economical. Packed in 80 * 50 lb. boxes.
PartNo
OMAHA HYGRADE
OMAHA HYGRADE 50# BOX
Description
80# BOX RED SWEEPING COMPND
50# BOX RED SWEEPING COMPND
MRO Supplies
Contractor Supplies
Miscellaneous
Tolco Corporation Sprayers & Bottles
Economical plastic flag on wire staff
Sold in bundles of 100 only
PartNo
BLKBRN 451WF-FLO-ORG
BLKBRN 451W-WHT
Trigger sprayers & plastic bottles for Industrial use.
Other sizes available - contact your local John Day Company representative
for more information.
Description
100/PK 4X5X21" FLO ORANG FLAG-WIRE
100/PK 4X5X21" WHITE FLAG-WIRE
PartNo
TOLCO 120123
TOLCO 120118
TOLCO 110501
TOLCO 110508
Janitorial Supplies
Peerless Recycled Wiping Cloths
Tricorbraun Buckets
•5 gallon plastic bucket
•Heavy duty handle
•Lids also available
•Available in black or white - specify when ordering
•Packaged in 50lb dispenser boxes
•Boxes are clearly stamped by product code
PartNo
PEER WLK
PEER NW
PartNo
TRICOR 192182
TRICOR LID ONLY
Description
LIGHTKNIT WHT WIPING CLOTH
NEAR WHITE WIPING CLOTH
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
BOTTLE PLASTIC 32 OZ CAPACITY
BOTTLE PLASTIC 22 OZ CAPACITY
7-1/4" DIP TUBE FOR 22 OZ BOTTLE
9-1/4" DIP TUBE FOR 32 OZ BOTTLE
802
Description
5 GALLON BUCKET BLACK REGRIND
FOR 5-GAL PLASTIC BUCKET
3M Industrial Supplies
3M™ Scotch-Brite General Purpose Scrubbing
Pad #96
Pads
3M™ Scotch-Brite Hand Pads
•Hand Pads that outperform steel wool and wire brushes.
•Fast-cutting with consistent finish for surfaces that need to be cleaned or
finished by hand.
•Pads are non-rusting and can be used with water or solvents.
•20 Pads Per Box.
PartNo
3M 04029
3M 04028
Description
#7447 HP-HP G.P HAND PADS MAROON
#7448 HP-HP U FINE HAND PAD LIGHT GRAY
3M™ Scotch-Brite Meduim Duty Scrub
Sponge #74
•Thick, Hand-size, medium-duty pad for everyday general-purpose cleaning
jobs.
PartNo
3M 08293
Description
#96 COMMERCIAL SCOURING PAD 6X9
Coated Abrasive - Rolls
3M™ Elek-Tro-Cut™ Utility Cloth Sheets
•Tough aluminum oxide bonded to cloth.
•Flexible, rust removal and sanding.
•Good for all general maintenance work.
ORDERING INFORMATION:
3M 211K Three-M-ite Elek-Tro-Cut Cloth Roll
PartNo
3M 05030
3M 05029
3M 05028
3M 05026
3M 05024
3M 05022
3M 05021
Description
1-1/2"X50YD 80 GRIT #211K
1-1/2"X50YD 100 GRIT #211K
1-1/2"X50YD 120 GRIT #211K
1-1/2"X50YD 180 GRIT #211K
1-1/2"X50YD 240 GRIT #211K
1-1/2"X50YD 320 GRIT #211K
1-1/2"X50YD 400 GRIT #211K
•Three dimensional abrasive laminated to a sponge.
•Ideal for one-step scuffing/cleaning.
•May be used for wet and dry.
•20 Per Case (Sold in Case Quantities Only).
PartNo
3M 20688
Description
#74 YELLOW/GREEN SPONGE 3-1/2X6-1/4
3M™ Spray Adhesives are generally recommended for projects with larger
surface areas and lightweight materials.
•Versatile tool for bonding most light-weight materials.
•Fast aggressive tack, long bonding range, little or no soak in.
For Technical Advice Contact a
John Day Company Representative
at 800-488-9699.
PartNo
3M 21210
Phone: 402-455-6151
Toll Free: 800-488-9699
803
Description
#77 SUPER 24 OZ SPRAY ADH
MRO Supplies
Spray Adhesives
3M Super 77 Spray Adhesive
Tape Dispensers
Scotch Box Sealing Dispensers
Spray Adhesives
3M 90 High Strength Adhesive
3M™ Spray Adhesives are generally recommended for projects with larger
surface areas and lightweight materials.
•One-minute dry time under most conditions.
•High contact strength and high temperature resistance.
PartNo
3M 30023
Description
#90 24 OZ ADHESIVE SPRAY
Tapes
Scotch® 130C Linerless Rubber Splicing Tape
Scotch H-180 Box Sealing Hand Tape Dispenser
•The perfect dispenser for center seam sealing of RSC boxes.
•Handheld, portable and easy to operate.
•An adjustable tape brake allowing control of tension and delivery.
•Dispenses tapes up to 2" wide and is constructed of plastic and metal.
Scoth H-122 Box Sealing Tape Dispenser
•A lightweight, compact, hand-held box sealing tape dispenser.
•Built-in braking device allows for tighter, more precise seals.
•High-impact plastic construction, accommodates tapes up to 2" wide on a 3"
core.
PartNo
3M 06925
3M 19008
Description
H-122 BX SEALING HAND 2" DISPENSER
H-180 2" ROLL-ON TAPE DISPENSER
MRO Supplies
Scotch Label Protection Tapes
High-voltage insulating tape that provides excellent thermal dissipation of
splice heat. Highly conformable. Meets industry specifications. Has excellent
physical and electrical properties. Up to 194°F (90°C) continuous operating
temperatures. Short-term 266°F (130°C) overload service.
Specifications:
•High voltage insulating; thermally conductive; self-bonding.
•Tape Thickness - 30 mil
•U.V. Resistance - No
•Typical Applications - Primary electrical insulation for splicing all solid
dielectric cables through 69kV.
•Specifications/Certifications and Listings - ASTM D-4388 Type I, II & III,
HH-I-553C.
PartNo
3M 41753
Description
#130C 1"X30’ SPLICING TAPE
Scotch Box Sealing Tapes
3M™ Top Printed Packing List Envelope "Packing List Enclosed" PLE-T1PL
High quality printing focuses attention on your documents. High-tack, hot
melt adhesive technology keeps the 3M™ Packing List Envelope in place
even through a wide range of temperatures and conditions. An oil resistant
and water resistant polyethylene envelope for packing slips, invoices, cards
and other shipping documents. SOLD IN CASE QUANTITIES ONLY.
Scotch(TM) Labelgard(TM) Film Tape 821
Space-saving pre-cut 4 inch x 6 inch tape pads keep labels dry, legible and
secure. Unique low-glare matte finish makes labels easy to read. Meets US
Postal regulations. Easy storage and has a writable surface.
Scotch 371 Industrial Box Sealing Tape
•Dependable performance on single-wall, low burst strength regular slotted
containers (RSCs) with higher weight contents.
Scotch 372 Performance Box Sealing Tape
•Works best on single-wall regular slotted containers.
PartNo
3M 13679
3M 72344
PartNo
3M 37593
3M 04133
3M 62104
Description
#371 48MM X 50M CLEAR SEAL#372 48MMX50M CLEAR SEALING
Phone: 402-455-6151
Toll Free: 800-488-9699
3M(TM) ScotchPad(TM) Pouch Tape Pads "Document Enclosed" 830
Orange border printed "Document Enclosed". Convenient 5 inch x 6 inch
sheets on a pad provide a linerless tape which translates to less application
time, less wasted product, and reduced labor costs. "See through" window
allows easy identification of contents. 200 pads per case.
804
Description
PLE-TIPL 4.5"X 5.5" PACKING LIST ENV
#821 4"X72YD LABELGARD FILM
#830 5"X6" POUCH TAPE
Scotch 893 Filament Tape
Scotch® Super 33+ Vinyl Electrical Tape
Superior mechanical/electrical insulation. Premium grade. Super stretchy in
all weather. 0°F (-18°C) -220°F (105°C). Easily conforms to irregular
surfaces. Aggressive adhesive. Resists UV rays, abrasion, corrosion, alkalies
and acids. Flame retardant.
Tape Thickness - 7 mil
U.V. Resistance - Exceeds UL510 requirements
Temperature Rating - 220°F - 105°C
Typical Applications - Primary insulation for splices up to 600V. Protective
jacketing.
Specifications/Certifications and Listings - A-A-55809 ASTM D-3005 Type 1
listed 539H LR48769
PartNo
3M 06132
Description
33+ SUPER 3/4"X66’ VINYL
Scotch 232 High Performance Masking Tape
PartNo
3M 02853
Description
#232 3/4 X 60 YDS MASKING
PartNo
3M 06938
Description
#893 3/4 X 60 FILAMENT TAPE
Scotch® 28 Glass Cloth Electrical Tape
High temperature thermosetting adhesive with glass cloth backing. Excellent
solvent resistance. High temperature resistance. Improves safety. Provides
freedom from worry. Lasts longer and improves safety. Class B rating to
Class H.
Specifications:
•Woven insulating glass cloth; high temperature resistance; high mechanical
strength.
•Tape thickness - 7 mil.
•Temperature Rating - Class B temp. 266°F (130°C).
•Typical Applications - Heat-stable insulation for furnace and oven controls,
motor leads, & switches.
•Specifications/Certifications and Listings - File E 17385 LR93411
PartNo
3M 15074
Description
#28 3/4"X66’ GLASS CLOTH
3M Friction Tape, Cello Wrap
MRO Supplies
Premium masking tape for paint masking and other industrial applications.
Conforms well to item being masked. Removes cleanly from surfaces.
Specifications:
•Premium grade paper masking tape, natural colored.
•Tape Thickness - 5.7 mil
•Temperature Rating - Up to 250°F (121°C)
•Typical Applications - Paint masking tape, bundling and protecting.
•Medium-duty tensile strength, nick resistance, abrasion resistance and good
handling.
•For general purpose bundling and reinforcing.
•Glass yarn filaments.
Tartan™ 200 Masking Tape
High grade friction tape. Good abrasion resistance.
Specifications:
•Woven insulating glass cloth; high temperature resistance; high mechanical
strength.
•Tape thickness - 15 mil.
•Temperature Rating - Class B temp. 176°F (80°C).
•Typical Applications - Abrasion protection fro splices and connections.
Specifications:
•Utility purpose paper tape.
•Tape Thickness - 5.5 mil.
•Temperature Rating - 199°F (93°C).
•Typical Applications - non-critical masking and holding.
PartNo
3M 71180
PartNo
3M 50218
Old No.
F1
Roll Size
3/4" x 60 Yds.
3M Retro-Reflective Truck/Equipment Tape
Description
#200 1"X60YD MASKING TAPE
•3M™ Diamond Grade Reflective Tape
•2" x 150', alternating Red (11") and White (7")
•3M™ Scotchlite* Diamond Grade conspicuity tape excedes the NHTSA
reflectivity requirements
•Superior Reflective Pressure Sensitive Tape
Visit Us At
www.johnday.com
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
#1755 3/4"X60’FRICTION TAPE
*Scotchlite is a trademark of 3M Corporation
PartNo
3M 980-32
3M 980-32-FT
805
Description
2" X 150’ RED/WHITE REFLEC TAPE
2"X1’ LGTH REFLEC TAPE(10’ MIN QTY)
3M Brand Self-Locking Ties
Natural color (clear) or UV protectied black
NOTE: 6", 8", 12" ties packaged 100 per bag, 15" packaged 50 per bag
PartNo
3M 41935
3M 41937
3M 41941
3M 41951
3M 41933
3M 41939
3M 41943
3M 41947
3M 41945
Description
STD 6" CLEAR TIES
STD 8" CLEAR TIES
STD 12" CLEAR TIES
STD 15" CLEAR TIES
UV PROTECTED 6" BLACK TIES
UV PROTECTED 15" H.D. BLACK TIES
Industrial Supplies
Traction Systems
3M Safety-Walk Slip-Resistant Conformable
Tread #510
Tensile Strgth.
30 lbs.
50 lbs.
50 lbs.
50 lbs.
30 lbs.
50 lbs.
50 lbs.
50 lbs.
120 lbs.
Tyton Heavy Duty Black Cable Tie
25 per package
PartNo
CODESU T150L0X2
CODESU T150M0X2
Description
32" BLACK HD LASHING TIE
TIE-21" LONG (25/BG) 175LBS
Tensile Strgth.
175 lbs.
175 lbs.
JOHN DAY COMPANY
INDUSTRIAL:
Ramps, freight elevators and loading docks. Stairwells, ladders, catwalks,
walkways and fire escapes, escalators, indoor and outdoor stairwells. Marble,
tile and concrete floors in commercial, warehouse or retail settings - machine
shops, garages and airplane hangars. Cold storage areas and wet, damp
locations - produce, seafood, meat and deli sections in manufacturing, and
supermarkets.

MRO Supplies
Uneven surfaces such as diamond grade safety plate, steps, ladder rungs,
heavy equipment & vehicles. Made with a high-friction, slip-resistant
material. Special aluminum backing. Conforms around corners and adheres to
irregular surfaces. Black. SOLD PER ROLL ONLY.
Omaha, Nebraska
800-488-9699
SPORTS:
Golf carts, all-terrain vehicles, boats and trailers, snowmobiles, skateboards,
windsurfers and personal watercraft. Stair machines, rowers, treadmills and
other exercise equipment. Docks, diving boards, swimming pool and
whirlpool areas, locker room floors, showers and saunas.

HEAVY EQUIPMENT & VEHICLES:
Fire engines, ambulances and other emergency vehicles. Cranes, forklifts and
other construction equipment. Farm equipment including tractors and
livestock trailers. Aircraft, trains, trucks.
PartNo
3M 19280
3M 19281
3M 19282
Milan, Illinois
800-767-2273
Description
#510 2"X60’ ROLL SAFETY WALK
#510 4"X60’ ROLL SAFETY WALK
#510 6"X60’ ROLL SAFTY WALK
3m Electrical Products
Connectors & Terminals
Ring Tongues - Vinyl Insulated Brazed Seam
16-14 AWG-Box 100

Redwood Falls, MN
800-767-8870
Call John Day Company for Additional 3M Electrical Components
Visit our website at
www.johnday.com
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
3M 22377
3M 22385
806
Description
MV14-6R/SX RING TONGUE
MV14-8R/LX RING TONGUE
Stub Size
6
8
3m Electrical Products
Connectors & Terminals
22-18 AWG
PartNo
3M 21718
3M 21726
3M 21734
Description
MV18-6R/SX RING TONGUE
Connectors-100 pcs box
Stub Size
6
8
10
PartNo
Description
3M 08159
#312 SPRING WING NUT
3M 08161
3M 43133
3M 43122
3M 43117
3M 49764
3M 312
Nylon
insulated
w/live
spring
#512 SPRING WING NUT
3M 512
Nylon
insulated
w/live
spring
GREY WIRE NUT CONNECTOR Highland™ Easy-grip
H-29
shell/genera
l use
BLUE WIRE NUT CONNECTOR Highland™ Easy-grip
H-30
shell/genera
l use
ORANGE WIRE NUT
Highland™ Easy-grip
CONNECTOR
H-31
shell/genera
l use
YELLOW WIRE NUT
Highland™ Easy-grip
CONNECTOR
H-33
shell/genera
l use
RED WIRE NUT CONNECTOR Highland™ Easy-grip
H-35
shell/genera
l use
Wire
Range
AWG
(mm2)
(1-5-10.0
mm2)
600V
600V
(2.0-16.0
mm2)
300V
22-16 AWG
300V
22-16 AWG
600V
18-14 AWG
PartNo
3M 13955
3M 13963
600V
Stud Size
8
10
Locking Forks - Vinyl Insulated Brazed Seam
22-18 AWG
PartNo
3M 13864
3M 13872
3M 13890
Description
MV18-6FLX LOCKING FORK
Stud Size
6
8
10
12-10 AWG
PartNo
3M 23342
3M 23359
3M 13906
18-12 AWG 3M 13914
3M 13922
600V
Description
Description
MV10-8RX RING TONGUE
MV10-10RX RING TONGUE
Stud Size
8
10
6
8
10
18-10 AWG
Honeywell/Hobbs Hourmeters – 82000 Series
Butt Connectors - Vinyl Insulated Brazed
Seam
•3 Screw Black Face
•Indicates operating time in hours and tenths, plus has a running indicator
•10,000 hour version standard, with automatic recycle to zero
•Temperature range: -40°F to +185°F, 40°C to 85°C
•Operating voltage range: 5-110 VDC (Voltage range covered by 85000
Series line)
•Battery system voltages: 6, 12, 24, 36, 48, 60, 72, and 80 VDC
•Polyester case and glass lens
Excellent vibration and shock resistance
PartNo
3M 24027
3M 23110
3M 22195
Description
MV10BCX 10GA YLW BUTT CONNECT
MV14BCX 14GA BLUE BUTT CONNECT
MV18BCX 18GA RED BUTT CONNECT
Phone: 402-455-6151
Toll Free: 800-488-9699
Stub Size
10
14
18
807
PartNo
HOBB 82450A-83
HOBB 82453-85
Description
RECT ENGINE HOUR METER
85014-02ROUND ENGINE HOUR METER
MRO Supplies
3M 43136
Connector Features/D
Max.
escription Voltage
Rating
Locking Forks - Vinyl Insulated Brazed Seam
12-10 AWG
Stewart Warner Hand-Held Tachometer Farm Supplies
Hi-Lift Farm Jack
•Rotative speeds up to 4,000 RPM
•2 color face dial
•2 3/4" wide, 4" length
•Rubber tips included
PartNo
STEW 82682
STEW 96798
STEW 96799
Description
STEWART-WARNER HAND TACH
RND TIP F/A.C. HND TACH
FLAT TIP F/A.C. HND TACH
Meterman Series 79 Measuring Wheel
The Hi-Lift® is an exceptional machine which offers:
•Deluxe casting jack.
•Weights only 31 lbs., yet lifts, pulls or pushes 7,000 lbs. (3-1/2 tons).
•Popular model 48" high with 38" continuous lift.
•Adjustable top clamp-clevis.
•Base plate of 30 sq. in. - holds on soft ground.
•Low pick-up with a 4-1/2" lifting nose only 4" from bottom of base plate.
•Shear pin which breaks when overloaded to protect castings.
•Hole beneath lifting nose for use with a clevis.
•Automatic operation lowers load step-by-step same as in raising.
MRO Supplies
PartNo
HIJACK HL-485
•The 6.6 foot circumference of this land measuring wheel makes it easy to
compute acreage
•The size and strength of the polystyrene wheel make it a perfect match for
rough terrain
•Comes equipped with convenient kickstand
Applications Include:
•Agricultural, Conservation, Forestry, Utilities
PartNo
METER 7912
Description
COMMERCIAL MEASURING WHEEL
Rated Load Lbs.
4660.00
Dutton Lainson Fence Stretcher-Splicer
Units
Feet and Inches
•The GoldenRod Fence Stretcher-Splicer is built for easy operation
•When splicing wire, the unit holds the ends in place so both hands are free to
make splice
Used to splice wire, stretch wire, to hold and staple wire, and to raise wire or
draw wire down
•Now with new improved cast guides
800-488-9699 or visit
www.johnday.com
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
HILIFT 48" JACK
PartNo
DL 56560
DL 56576
808
Description
400 FENCE STRETCHER-SPLICER
405 FENCE STRTCHR-SPLCR W/HLDNG RTCHT
Farm Supplies
Master Farm Heaters
H.D. Hudson Bugwiser® Sprayers
All Bugwiser sprayers feature:
PartNo
Description
SHAW 62181
SHAW 62182
SHAW 62183
SHAW 67215
SHAW 67220
HUDSON 1 GAL. POLY SPRAYER
HUDSON 1 GAL. S.S. SPRAYER
HUDSON 2 GAL. S.S. SPRAYER
Actual Capacity
Gallons
1.3
2.5
3.0
1.5
2.5
Your Midwest
Distributor for
over 96 Years
Phone: 402-455-6151
Toll Free: 800-488-9699
809
PartNo
Description
DESA B55CT
MASTER HTR 55,000 BTU W/
DESA B115DT
DESA B165DT
MASTER HTR 115,000 BTU W/
MASTER 165,000 BTU HTR W/
Output
Motor
cap,
120V, 60
BTUs/hr cycle, 3450
RPM
w/therm
prot.
55,000 1/15HP/172
5RPM
115,000
1/6HP
165,000
1/4HP
Fuel tank Continuous
cap
operation
(approx)
(hrs)
4 gallon
11.0
9 gallon
13.5 gallon
12.2
12.2
MRO Supplies
•Wide, deep funnel top for splash-free filling and easier cleaning
•The Hudson® Roto-Valve™ is comfortable and easy to use
•Squeeze to spray; release to instantly stop
•Valve rotates 360° for easy up or down spraying
•Long-reaching Braided Kem Oil power sprayer-type hose that can't kink
•Bright, nickel-plated brass extension and nozzle for durability and
outstanding appearance
Polyethylene sprayers feature:
•Translucent tanks for easy sighting of liquid level
•High performance poly pump with soft cushion grip
•Pressurizes sprayer up to 15% faster; makes it easy to carry and handle
sprayer
•Has notch for locking-in spray wand when not in use
Stainless steel sprayers feature:
•High efficiency poly pump with strong "D"-handle
•Heavy-grade, polished stainless steel tank for strength and good looking
appearance
Automatic ignition - just plug in to start, complete combustion of fuel
eliminates all fumes. Stainless steel combustion chamber for years of troublefree service. Heavy duty continuous ignition transformer assures
instantaneous ignition even in coldest, sub-zero weather. Spark plug ignition
and low pressure atomizing burner. Extra large wheels and flared handles for
ease of transport. Attractively painted with heat-resistant paint. New flat type
tank and low center of gravity makes the unit virtually "tip-proof." B115DT,
B55CT and B165DT have built-in thermostat. Automatic cadmium cell safety
control featured in all models. Automatically shuts off the heater in case of
combustion malfunction.
OPTIONAL THERMOSTAT KIT. Provides maximum fuel efficiency allows more hours of heat per tank. Quickly pays for its low cost. No
installation required, just hang the thermostat approximately 5 feet from floor
level and away from line of heat. Plug 10 ft. cord into thermostat. Dial
temperature desired.
FUEL GUIDE:
Fuel
Odor
Poss. Add. Maint.
Cold
Weather Recomm.
Kerosene
Very slight
None
-Fuel oil #1
Very slight
None
-Fuel oil #2
Slight
See note 2
See
note 2
Diesel #1 (or diesel CB)
Very slight
None
Diesel #2 (or diesel TT)
Slight
See note 2
See
note 3
Note:
1. For best results, kerosene, fuel oil #1, and diesel #1 should be used when
available. Fuel oil #2 and diesel #2 can be used with the results noted above.
These fuels are, however, recommended only when the preferred fuels are not
available. Do not use gasoline or other volatile fuels.
2. Filters and nozzles may require more frequent cleaning/replacement,
altitudes may affect combustion performance with #2 fuels.
3. Below 20°F, it is best to use kerosene, fuel oil #1, or diesel #1. Some #2
fuel oils and #2 diesel fuel may contain winterizing additives, which will
allow operation at colder temperatures. It is best to check with your local fuel
dealer to determine if these additives are present.
All Models Meet OSHA Requirements.
Farm Supplies
PartNo
SHAVER SA-608-EX
SHAVER SA-614-EX
SHAVER SA-319-A
SHAVER SD-600
Shaver Post Hole Diggers
Shaver Post Drivers For Tractors And
Skid-Steer Loaders
F.O.B. Factory for shipment from John Day locations, add $6.00 per CWT
advance freight.
PartNo
SHAVER 101
SHAVER 301H
SHAVER 601H
SHAVER 901
SHAVER 510
SHAVER 1020
Description
LGT-DTY 3PT DIGR LESS AUGER CAT 0 & 1
RG-DTY DIGR W/HD PTO DRV CAT I/II
HVY-DTY DIGR W/HD PTO DRV CAT I/II
MAX-DTY DIGR LESS AUGER CAT I/II
RG-DTY HY DIGR MTG PKG F/LDR W/5-10 GPM
HVY-DTY HY DIGR MTG PKG F/LDR W/10-20
GPM
Hydraulic Digger Mounting Options
Weight
125
170
204
309
113
115
MRO Supplies
advance freight.
PartNo
SHAVER 510-S
SHAVER 510-T
SHAVER 510-B
SHAVER 510-F
SHAVER 510-TS
Description
BOLT-ON BUCKET MOUNT
UNIV BUCKET MT W/CHAIN & TURNBKL
BOOM 3PT MOUNT CAT I/II
SKID LOADER FAST-TACH MOUNT
TRAC SIDE-MNT (WORK W/510 & 1020 HY
DIGRS)
Post Hole Digger Down Pressure Kits
Weight
10
50
100
-165
advance freight.
PartNo
SHAVER SDP-100
SHAVER SDP-101
Description
DOWN PRESSURE KIT (101,301)
DOWN PRESSURE KIT (601,901,510-B)
Augers for Use with Post Hole Diggers
**Orchard Style Auger Available - Call for more information.
PartNo
SHAVER SA-104-AC
SHAVER SA-106-AC
SHAVER SA-109-AC
SHAVER SA-304-AC
SHAVER SA-306-AC
SHAVER SA-309-AC
SHAVER SA-312-AC
SHAVER SA-314-AC
SHAVER SA-306-ACD
SHAVER SA-309-ACD
SHAVER SA-312-ACD
SHAVER SA-314-ACD
SHAVER SA-616-ACD
SHAVER SA-618-ACD
SHAVER SA-624-ACD
SHAVER SA-930-ACD
Description
4" SEMI-DBL FLIGHT AUGER (32"LGTH)
4" SEMI-DBL FLIGHT AUGER
6" DOUBLE FLIGHT AUGER
Auger Accessories
PartNo
SHAVER SA-304-RP
SHAVER SA-308-EX
SHAVER SA-314-EX
Description
DIRT PT PKG (USE W/ROCK AUGERS)
9" AUGER EXTENSION (301 ONLY)
14" AUGER EXTENSION (301 ONLY)
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
9" AUGER EXTENSION
14" AUGER EXTENSION
AUGER ADPTR TO DIGR 2-9/16" TO 2"
STORAGE KIT/DISPLAY STAND
Fits
All
All
All
All
All
All
All
All
All
All
All
All
601,901,hyd
601,901,hyd
601,901,hyd
901
Weight
47
47
Weight
21
26
35
21
27
36
45
47
40
52
68
74
77
88
114
126
Weight
9
7
9
810
Weight
12
14
5
54
•More impact, faster driving.
•Drives 4-5" post in as little as 10-15 seconds.
•No digging, no pointing, no tamping, no setting.
•Easy hydraulic or crank adjustments to plumb posts.
•Drives steel and wood posts, even ties.
•Includes rubber guard to provide safety for the operator by shielding him
from the point of impact.
Takes less than half the time to plumb posts on hillside with hydraulic base
plate - with either hydraulic or manual with two adjusting cranks, it's easy to
drive posts straight and true on most any terrain.
Front mount, rear mount & skid steer mounting available. Cat I, II, and III
packages are available.
Rear mounting package for HD-10 and HD-12 drivers includes quick-tach
mounting for attaching to 3-point quick hitches.
Skid steer mounting:
•For attaching to front end of skid-steer loaders.
•Attaches quickly to skid-steer loaders and easily supports the weight and
impact of post drivers.
•Fits Case/IHC, John Deere, New Holland/Ford, Melroe, Owatonna, Mustang,
and Bob Cat skid steer loaders.
•Package includes manual stabilizer.
•Must specify Steel or Plastic Tank.
For complete post driver, select one basic unit package and one mounting
package.
F.O.B. Factory. For shipment from John Day locations, add $6.00 per CWT
advance freight.
PartNo
SHAVER HD-8
SHAVER HD-8-H
SHAVER HD-10
SHAVER HD-10-H
SHAVER HD-12-H
Description
STD UNIT W/MANUAL BASE PLATE
STD UNIT W/HYD BASE PLATE, SPECIFY MTG
PKG
STD UNIT W/MANUAL BASE PLATE
PKG
PKG
Weight
385
433
Description
HYD STABILIZER PAD F/OPEN CTR HYD SYS
HYD STABILIZER PAD F/CLOSED CTR HYD
SYS
CONCRETE BREAKER FOR HD-8
3PT MTG BRKT F/HD-8 W/MAN STABILIZER
3PT MTG BRKT F/HD-10 & 12 W/MAN
STABILIZER
Weight
58
60
Optional Packages & Accessories
PartNo
SHAVER OS-1-11
SHAVER OS-2-11
SHAVER CB-1
SHAVER CB-2
SHAVER CB-3
SHAVER MB-01-A
SHAVER MB-1201-A
639
661
839
19
34
52
98
135
Farm Supplies
Optional Packages & Accessories
PartNo
SHAVER MB-1301-A
SHAVER SM-0011-PH
SHAVER SM-1011-PH
SHAVER SM-1211-PH
SHAVER OS-4-11
Description
3PT MTG BRKT F/CAT III TRACTORS
STEEL POST HOLDER FOR HD-8
MAN STABILIZER OPTION F/HD-8 OR 10
Sitrex Seeder/Spreader
Weight
137
10
10
10
64
Shaver Post Driver Optional Packages Options for Converting Manual Base Plates to
Hydraulic
PartNo
SHAVER HD-8-HCK
SHAVER HD-10-HCK
Description
HYD CONV KIT F/HD-8 OPEN OR CLOSED
HYD CONV KIT F/HD-10 OPEN OR CLOSED
Weight
156
185
Shaver StumpBuster Tree Stump Cutter
•Durable, all steel construction.
•540 RPM PTO Drive or Ground Drive.
•Cat. I 3-Point Hitch or Pull Type.
•Steel, cone shaped one piece hopper.
•Adjustable spinner for maximum spreading uniformity.
•High quality, anti-corrosive paint.
Description
SITREX 804019
FSP-100 3.5 BUSHEL, GRD DRV,
PULL TYPE
FSP-150 1.75 BUSHEL, GRD DRV,
PULL TYPE
FS 150 4-3/4 BUSHEL STL HOPPER
3PT
FS 250 6-1/2 BUSHEL STL HOPPER
3PT
FS 400 10 BUSHEL STL HOPPER 3PT
FS 500 11.25 BUSHEL STL HOPPER
3PT
ARTICULATED AGITATOR
(OPTIONAL)
DEFLECTOR F/SALT-SPDS UNDR
HPR ONLY-OPTIONAL
BANDING KIT-PROVIDES EVEN
SPDNG-OPTIONAL
SITREX 804020
SITREX 804003
SITREX 804002
SITREX 804005
SITREX 804001
SITREX 400200
Cuts stumps up to 45" in diameter. 3-Point Mount or Skid Loader "FastTach". 2-1/2" Swing Cylinder. Operable from Tractor or Skid Loader Seat.
Long lasting Carbide Cutter Teeth. Oversized Gear Box.
SITREX 400091
SITREX 400168
Hopper Cap. Max Load
USA Gal. Cap. Lbs.
36
284
38
352
88
38
352
110
52
573
112
79
89
860
992
114
119
--
--
--
--
--
--
--
--
--
SC-25 3-POINT MOUNT:
Requires 15-35 HP tractor. 980 RPM Cutting Wheel. Parking Stand. Heavy
Duty PTO Shaft. 24" Cutting Wheel w/23 Carbide Teeth.
SC-50 3-POINT MOUNT:
Requires 35-100 HP tractor. 895 RPM Cutting Wheel. Parking Stand. Heavy
Duty PTO Shaft. 34" Cutting Wheel w/25 Carbide Teeth.
SC-25H SKID LOADER MOUNT:
Requires 15 to 25 GPM hydraulic output. 980 RPM Cutting Wheel. Fast-Tach
System. Eaton Hyd. Motor. 24" Cutting Wheel w/23 Carbide Teeth.
SC-50H SKID LOADER MOUNT:
Requires 25 GPM high flow hookup. 795 RPM Cutting Wheel. Fast-Tach
System. Eaton Hydraulic Motor. Easy hookup, visibility.
NOTE: Units include hoses less Quick Couplers, Skidloader must have 25-40
GPM. SC50H requires Stand and Universal Bracket Only.
*Refer to Application Guide for specific Mount Applications.
PartNo
SHAVER SC-25
SHAVER SC-50
SHAVER SC-25-H
SHAVER SC-50-H
Description
STUMPBUSTER - 3 POINT MOUNT
STUMPBUSTER - 3 POINT MOUNT
STUMPBUSTER-SKIDLOADER MNT*
STUMPBUSTER-SKIDLOADER MNT*
Phone: 402-455-6151
Toll Free: 800-488-9699
Weight
780
1020
740
1140
811
Ship Wgt.
800-488-9699 or visit
www.johnday.com
Your Midwest
Distributor for
over 96 Years
84
MRO Supplies
PartNo