English

Transcription

English
V826-C
ENGLISH
INDUSTRIAL POWER TRANSMISSION PRODUCTS
CONVEYOR BELTS
ENGINEERING PLASTIC
2013
To give attentive consideration to both humanity and nature.
Safety Precautions
Please read all the warnings!
● Please take all necessary precautions when using our products. Also, Please review relevant product catalog and design documents, etc.
Significances of safety precautions are categorized as follows:
M e a n i n g s
Signs
Danger
Warning
Caution
Imminently causing death or severe injury to the user who misuses
products.
Possibly causing death or severe injury to the user who misuses
products.
Possibly causing personal injury or property damage if misused.
Power Transmission Products
Use
Danger
● If you expect that a belt will fail and idle, free-run, or stop the system, thus causing a fatal or severe accident, please provide
an extra safety device.
● Do not use a belt as a lifting or towing tool.
Warning
● If you expect that static electricity will come from the power transmission belt system, thus causing fire or malfunction of the
controller, use an antistatic belt and set a neutralization apparatus in the system.
Caution
● Do not use a belt as an insulator. Contact us for information on insulation properties, which vary in belt type.
● For a belt that touches food directly, use one that complies with the applicable food hygiene law of your country
● Do not modify a belt, or its quality and performance could deteriorate.
Function & Performance
Caution
● D
o not use a belt beyond its capacity or for an application other than that specified by the catalog, design documents, etc. This can cause premature failure of the belt.
● If water, oil, chemical, paint, dust, etc. sticks to a belt or pulley, its power transmission could deteriorate and the belt may fail.
● A cogged belt makes louder noise during high-speed rotation. If this occurs, use a soundproof cover.
Storage & Transportation
Warning
● To store a heavy belt, use a suitable jig or stopper to prevent accidents such as belt toppling or tumbling.
Caution
● Use suitable equipment to carry/handle a heavy belt or pulley. Otherwise, back injury may result.
● D
o not put weight on or bend a belt forcibly to carry or store it. Otherwise, it will produce defects or scratches to the belt, resulting in damage.
● Store the belt in low humidity and a temperature range of -10℃ to 40℃. Do not expose belts to direct sunlight.
Mounting & Operation
Danger
Caution
● Install a safety cover over rotating components including belt/ pulley. Otherwise, hair, gloves and clothing can become entangled in the belt/ pulley. If a belt/pulley breaks, fragments may cause injuries.
● T
ake the following precautions to maintain, inspect and replace a belt.
1)Turn off power and wait until the belt and pulley have stopped completely.
2)Secure machinery so that it may not move during belt removal.
3)Use caution : Do not unintentionally turn on power.
● Use the same type of belts or pulleys per OEM specification. Use of a different type may cause premature failure.
● Misalignment of the pulleys can damage the belt and result in flange failure. Make proper adjustments to system.
● L
oosen the belt tension when changing belts. Do not force or stretch a belt over the flange. Do not use a screw driver or other sharp objects into when replacing the belt as this will result in damage.
● A
pply the appropriate belt tension as specified by the relevant catalog and design documents, etc. Inappropriate tension could result in damage of the belt and shaft.
● T
ake the following precautions to modify the pulley in use:
1)Remove burrs and maintain proper pulley angle; 2)Secure accurate dimensions after modification;
3)Maintain the pulley strength after modification.
● B
efore assembling the flange with the pulley, check for foreign materials between the pulley and flange. Fasten the flange with a caulking tool and so on. Inappropriate installation could result in the flange coming off.
Handling of Used items
Caution
1
● Do not burn belt, or hazardous gas could be produced.
Plastic Conveyor Belts
Use
Warning
●Do not use the belt as a lifting or towing device.
●To convey unpackaged food, use a belt that complies with the applicable food hygiene law of your country.
Storage & Transportation
Warning
Caution
●To store a large plastic conveyor belt, use a suitable jig or stopper to prevent accidents due to belt toppling or tumbling.
●Use suitable equipment to carry and handle large plastic conveyor belts. Otherwise, back injury may result.
Mounting & Operation
Danger
●Before fitting and inspecting the plastic conveyor belt, be sure to turn off the power of the conveyor and related systems and check to make sure that
conveyor has stopped, so as to prevent accidents.
●Fix a safety guard to avoid close contact with conveyor belt in use. Otherwise, you may become entangled in the conveyor system.
Installation Works
Warning
●Solvent and adhesive used for endless type belts is flammable. No open flames are allowed during operation.
Engineering Plastic Products
Use
Warning
●Do not use the product for medical purposes, such as transplantation or in such a way that it touches bodily fluids or tissues.
Storage & Transportation
Caution
●Injury may occur as a result of a product falling. Use proper equipment especially when carrying a large product and install it into processing machinery.
●A pile of products on an uneven place could slip, collapse or topple by gravity. Store products on a flat shelf or pallet that won't bend under product weight.
●Static electricity may spark. Do not rub products against insulators like paper, cloth, plastic.
●Gas will occur from burning product. Keep away from fire.
Process
Caution
●Product may break up due to partial heat generated by forced processing. To reduce over heating, use air, cutting oil or a sharp cutting tool, and adjust its
feeding speed. Pay special attention to bore processing which generates heat easily.
●As the product is less elastic than metal, it could deform and come off the chuck, scattering materials if it doesn't fit properly on the processing machinery.
Fix the product firmly, taking care not to deform materials.
Couplings
Use
Danger
●Provide an additional safety device if you expect that a fatal or severe accident may occur if the coupling breaks or comes off, and then idles, free-runs or
stops the system.
Function & Performance
Caution
●Do not use product beyond its capacity or for applications other than specified in the catalog, design documents, etc. Otherwise, the product could fail prematurely.
Storage & Transportation
Warning
●Use an appropriate jig or stopper to prevent a large coupling from toppling and tumbling. Do not store coupling at a height where it could fall.
Caution
●Use suitable equipment when carrying or handling a large coupling, depending on its weight. Otherwise, back injury may result.
Mounting & Operation
Danger
●Be sure to put a safety cover over the rotating components including the coupling. Otherwise, hair, gloves or clothing may become entangled. Also, injury
may occur if parts fly off.
●Secure coupling. Otherwise, the coupling and its parts may come off.
●Take the following precautions to maintain, inspect or replace coupling:
1) Turn off the power and wait until the machine stops completely.
2) Fix machinery so that it may not move during removal of the coupling.
3) Take care not to unitentionally turn on the switch.
●Before you operate the machine, check to make sure unused bolts or tools do not remain after installation of the coupling. If operation starts with unused
items being left behind, they could be flung off, causing injuries.
Caution
●Replace the same type of couplings. Use of a different type of coupling will result in earlier damage.
●Adjust coupling properly Otherwise, deflection or declination will damage or displace the coupling.
Handling of Used items
Danger
●Do not burn the coupling. Otherwise, hazardous gas could be produced.
2
I
N
D
E
X
CONTENTS
Safety Precautions�������������������������������������������������� P1,2
1. Power Transmission Belts
and Related Products��������������������������� P4 〜 70
2. Conveyor Belts�������������������������������������� P71 〜 80
3. Engineering Plastic Products���������� P82 〜 89
Global Factories & Sales Offices���������������������������� P90
33
1. Power Transmission Belts and Related Products
Application Examples ................................................................ P5, 6
Lineup of Belts and Related Products ..................................... P7, 8
Industrial Power Transmission Product Selection Chart ...... P9,10
Dimensions ................................................................................... P11
Ⅰ Synchronous Power Transmission
Round Tooth Timing Belt
Belt Type, Dimensions & Product Code................... P13
H Series ...................................................................... P23
Trapezoidal Tooth Timing Belt
SUPER TORQUE Timing Belt G ........................ P14〜16
Belt Type, Dimensions & Product Code .................. P24
SUPER TORQUE Timing Pulley. ............................... P17
green eco® Series....................................................... P25
MEGA TORQUE Timing Belt G&U . ..................... P18,19
Timing Belt G ...................................................... P26〜28
Mega Torque GⅡ. ...................................................... P20
Timing Belt U ...................................................... P29〜31
Mega Torque EX......................................................... P21
LONG-SPAN Timing Belt........................................... P32
Giga Torque GX. ......................................................... P22
Timing Pulley .......................................................... P33, 34
Ⅱ Frictional Forced Power Transmission
Classical V-Belt / Red label V-Belt............................ P36
RIBSTAR Belt G (Rubber V-Ribbed Belt). ................. P48
Classical V-Belts for DIN 2215/ISO4184
RIBSTAR Belt U (Polyurethane V-Ribbed Belt). ....... P49
Wrapped Type. ............................................................ P37
RIBSTAR Pulley (V-Ribbed Pulley)............................. P50
Classical V-Belts for DIN 2215/ISO4184
FLEXSTAR® Belt. ......................................................... P51
TRIPLEX® Raw Edge Cogged Type....................P38〜40
SUPER FLEXSTAR® Belt.............................................. P52
MAXSTAR WEDGE V-Belt........................................... P41
FLEXSTAR® Belt J. ...................................................... P53
MAXSTAR WEDGE V-Belt for RMA / MPTA.............. P42
POLYMAX® Belt........................................................... P54
Narrow V-Belt for DIN7753 / ISO4184....................... P43
MB Belt. ....................................................................... P55
SUPER VS® Belt (Variable Speed Belt)...................... P44
STARROPE®, SUPER STARROPE®............................. P56
MAXSTAR WEDGE Bushing Pulley...................... P45, 46
PRENE V-ROPE, PRENE HEXAGONAL-ROPE......... P56
e-Power V-Belt........................................................... P47
Flat Belt........................................................................ P57
®
Ⅲ Direct Connected Power Transmission
Chemi-Chan®
(High Performance Miniature Coupling)................... P59
HYPERFLEX® Coupling............................................... P60
TSCHAN® Coupling NOR-MEX®........................... P61, 62
TSCHAN® Coupling S.................................................. P63
Ⅳ Other Related Products
SLEEVE ROLL (Polyurethane molded product)....... P65
STARLOCK® (Shaft Fastener)............................... P66, 67
Ⅴ Troubleshooting for Power Transmission Products
For Timing Belt............................................................ P69
For V-Belt..................................................................... P70
44
Synchronous Power Transmission &
Direct Connected Power Transmission
Large Knitting Machine (SUPER TORQUE Timing Belt)
Polisher (SUPER TORQUE Timing Belt)
Copier (Rubber Timing Belt)
Frictional Forced
Power Transmission
Application
Example
Heavy Duty Polisher (MAXSTAR WEDGE V-Belt)
Combine (V-Belt for Agricultural Machines)
55
Food Processor (RIBSTAR Belt)
Marine Engine (TSCHAN® Coupling S )
Plastic Card Vender (Polyurethane Timing Belt)
Packaging Machine (Polyurethane Double Timing Belt)
Large Industrial Robot (FREESPANTM Belt)
Dryer (V-Belt)
NC Lathe (RIBSTAR Belt)
NC Lathe (Multi-POLYMAX Belt)
*To show the application examples clearly, safety covers are removed in the
pictures on this page.
Always put on the safety covers when in use.
66
Lineup of Belts & Related Products
Product Name & Application
Product Name & Application
SUPER TORQUE Timing Belt
(General use)
Classical V-Belt
(General use)
MEGA TORQUE Timing Belt G&U, GⅡ, EX
(Heavy-duty use)
New!
Multi V-Belt
(General use : Joined V-Belt)
Less Thickness Wrapped V-Belt
(Agricultural use)
Orange label
SUPER AG-X
New!
Timing Belt G
(Rubber belt)
BARE-BACK® V-Belt
(Agricultural use, Washer and Dryer)
Timing Belt U
(Polyurethane belt)
MAXSTAR WEDGE V-Belt
(Heavy-duty use)
Rubber Timing Belt
H-Series
green eco® Series
New!
LONG-SPAN Timing Belt
(Endless & Open-End)
Wrapped Belt
Timing Belt
New!
Multi MAXSTAR WEDGE V-Belt, Multi Super WEDGE Ⅱ
(Joined V-Belt for Heavy-duty)
e-POWER® Belt
(Notched type)
Coupling
Timing Pulley
New!
7
Timing Pulley
Perforated V-ROPE
Chemi-Chan®
(High Performance
Miniature Coupling)
V-Belt with lugs
(Agricultural use)
TSCHAN® Coupling S and Coupling NOR-MEX®
HEXAGONAL V-Belt
New!
Raw Edge COGGED V-Belt
(Agricultural use)
Orange label
SUPER GOLD 1000
AG COG 4
AG COG 20
New!
Product Name & Application
Ribbed Belt
Product Name & Application
RIBSTAR Belt G
(Rubber)
RIBSTAR Belt U
(Polyurethane)
MB Belt
(For Sewing Machine)
Raw Edge COGGED V-Belt
(Agricultural use)
TRIPLEX
e-POWER®
New!
Raw Edge MULTI-PLY V-Belt
(Automotive use)
Raw Edge COGGED V-Belt
(Automotive use)
Polyurethane Belt
Raw Edge Belt
POLYMAX Belt
(Wide-angle Polyurethane V-Belt)
Raw Edge COGGED
Variable Speed Belt
STARROPE® & SUPER STARROPE®
(Polyurethane Round Rope)
PRENE V-ROPE & HEXAGONAL-ROPE (Polyurethane Rope)
FREESPANTM Belt
Polyurethane Timing Belt
Pulley and Bushing
for WEDGE V-Belt
FLEXSTAR®
Pulley and Bushing
for RIBSTAR Belt
SUPER FLEXSTAR®
(Heavy-duty use)
Polyurethane Molded
Bushing
MB BUSHING
SLEEVE ROLL
Flat Belt
Pulley
New!
FLEXSTAR® Belt J
(For Conveyor)
Flat Belt for general use and lifter
88
■ Industrial Power Transmission Product Selection Chart
How much slip
can you allow?
How do you
want to use it?
What features
do you need?
Type of Belt / Pulley
Slip
Drive
Tolerance Classification
Applications
Tooth Shape
or Form
Material
Office & Home appliances
General use (for motor drive)
General use
No slip
allowed
Synchronous Power Transmission
Printer
General use
Round tooth
Rubber
Timing
Belt
Automotive use (for engine drive)
Trapezoidal tooth
General use
Office & Home appliances
General use
Printer
Round tooth
Thermosetting
polyurethane
Home appliances
Trapezoidal tooth
General use
General use
Round tooth
Thermoplastic
polyurethane Trapezoidal tooth
Less thickness
Standard
Office & Home
appliances, General use
(based on ISO standard)
Agricultural use
Rubber
V-Belt
General use
Standard
Friction Forced Transmission
Raw
Edge
Motorcycle, general use
Heavy-duty agricultural use
Home appliances,
agricultural use, general use
Flat Belt Elevating machine (agricultural use)
3 DS3M・DS5M・DS8M・DS14M
Long-span drive
SUPER TORQUE G Open-End
4 S2M・S3M・S5M・S8M・S14M
Synchronous transportation
SUPER TORQUE G Endless
5 S8M・S14M
Accurate positioning
STARMAX® G
6 ST1.5・ST55・ST80・ST83・ST2.0・ST1.0
Ozone resistance
green eco® Series
7 S2M・S3M・S5M
Low-speed, high-torque use
MEGA TORQUE G
8 MTS5M・MTS8M・MTS14M
High torque use
MEGA TORQUE G2
9 MTS8M, MTS14M
High precision positioning
MEGA TORQUE EX
10 MTS3M, MTS5M
GIGA TORQUE
12 G8M, G14M
Synchronous Power transmission
SYNCHROSTAR® G
13 MXL・XL・L・H・XH・XXH
Heat resistance
SYNCHROSTAR GA
14 ZA・ZAS・ZB・ZBS
Multi-pulley, double-sided drive
SYNCHROSTAR G Double Timing
15 DMXL・DXL・DL・DH
Long-span drive
SYNCHROSTAR G Open-End
16 MXL・XL・L・H
Synchronous transportation
SYNCHROSTAR G Endless
17 L・H・XH・XXH
Ozone resistance
green eco® Series
18 MXL
Clean drive
SUPER TORQUE U
19 S2M・S3M
Long-span drive
SUPER TORQUE U Open-End
20 S2M・S3M
Low-speed, high-torque use
MEGA TORQUE U
21 MTS8M
Accurate positioning
STARMAX® U
22 ST83・ST111
Accurate positioning
STARMAX® U
23 T80・T83・T111
Clean drive
SYNCHROSTAR U
24 T80・T5・T10・AT5・AT10・XL・L
Multi-pulley, double-sided drive
SYNCHROSTAR U Double Timing
25 DT5・DT10
Long-span drive
SYNCHROSTAR U Open-End
26 T80・XL・L
Synchronous
transportation
FREESPANTM Belt
28
Light-duty use, compact design
FHP
30 3L・4L・5L
General use
Classical V-Belt
31
High power transmission
Red label V-Belt
32
e-POWER®
33 A・B・C・D
Heavy-duty use, compact design
MAXSTAR WEDGE V
34 3V・5V・8V
Anti-vibration
Multi MAXSTAR WEDGE
35 R3V・R5V・R8V
Shock-load resistance
Multi Super WEDGE II
36 R5V, R8V
37
Long-span drive
Thin Flat ATM, ticket vending
Belt
machine
Office & Home
V-Ribbed appliance, general use
Belt
Automotive use
Round
Belt
(Square
Belt)
Special
Belt
Rubber
Millable
Polyurethane
Rubber
Office & Home appliance, general use
Polyurethane
General industries,
agricultural machinery
Rubber
General industries
Polyurethane
29
Flex resistance
L type
Heat resistance, flex resistance
Orange label L type
38
Heat resistance, flex resistance
Gold label L type
39
Heat resistance, flex resistance, anti-vibration
AG Series
40
High power transmission
Orange label Raw Edge COGGED
41
Low contraction
SUPER GOLD 1000 Raw Edge COGGED 42
Energy-Saving
e-POWER®
High power transmission
T5・T10・AT5・AT10・L・H
K・M・A・B・C・D・E
LA・LB・LC
LA・LB・LC
43 AX・BX・CX
TRIPLEX
44 AX・BX・CX
Multi-VX
45 RAX・RBX・RCX
MAXSTAR WEDGE SUPREME®
46 3VX・5VX
Multi MAXSTAR WEDGE SUPREME®
47 R3VX・R5VX
48 M・A・B・C
Abrasion resistance
REMF®
50 HM・A・B・BC
Multi- ply
Low noise
MPMF®
51 HM・A・B
Cogged
Abrasion resistance, flex resistance
RECMF®
52 HM・A・B・BC・C・CD
WFC®
53 A, B
49 LA・LB・LC
Raw Edge Cogged
(Variable speed)
Lateral pressure resistance
RCVS, SUPER VS®
54 Top width 10mm〜120mm
Lateral pressure resistance, high power transmission
DCVS®
55 Top width 20mm〜120mm
Wrapped (Variable speed)
High power transmission
AGVS®
56 HL・HM
High-speed revolution, compact design POLYMAX
57 3M・5M・7M・11M
High-speed revolution, anti-vibration
58 R5M・R7M・R11M
Multi POLYMAX
Light-duty, clean drive
MB Belt
59 MB
PORT®, HARBOUR® SPECIAL PORT®
60 P・H・SP
Cut edge
Processed joint
Good flex resistance
ECHO®, PIONEER®
61 EC・P
Flat belt with V rail
Less stretch and runout
DRY FLEX®
62 AA・O・OW・TN
High-speed drive, compact design
FLEXSTAR®
63 FL・FM・FH・FLEG・FLG・FLE・FMG・FHG
High tensile force
SUPER FLEXSTAR®
Cord core flat type
Press
27 HTD5M・HTD8M・HTD14M
Plain
Round edge
Rubber
11 H8M, H14M
Heavy duty power transmission
BARE-BACK® V
ThermoWide-angle
setting
polyurethane Cogged type
General use
Direct Connected
Power Transmission
2 S8M・S14M
SUPER TORQUE G Double Timing
Wide-angle cogged Especially for small diesel automotives
General use,
agricultural use
9
SUPER TORQUE G
Multi-pulley, double-sided drive
Rubber dust free, belt clutch
Flat
Automotive use
Type
1 S2M・S3M・S5M
Standard type
Narrow
width type
Home appliances,
agricultural use
Direct
Connected
Power
Transmission
Raw
Edge
Cogged
Less
thickness
type
No
SUPER TORQUE G
Notched type Energy-saving
Less thickness
Note: Take
slip ratio as
approx. 1%
Product Name
High power transmission, heat resistance,
water resistance, flex fatigue resistance
High power transmission, heat, water and flex fatigue resistance H Series
General use
Some slip is
allowed.
Mitsuboshi Products Lineup for Power Transmission Belts
Features
Cord core flat
No cord and
canvas flat type
Rib
Flex resistance, high
power transmission,
high-speed revolution
RIBSTAR G
Flex resistance, high-speed revolution
RIBSTAR U
Laminated flat type
Hexagonal
Multi-pulley, double-sided drive
Standard perforated V rope Adjustable belt length
64 FU・FW・FY
65 J8GA・J8GE・J8H・J8HB・J6H・J6HB・J3H・J3HB
Good driving
stability, compact
design, maintenancefree
FLEXSTAR® Belt J
66 JL・JLB・JL3
67 JN
68 JU・JLU5・JLU6
RIBSTAR G (Bare-back type)
69 HB
70 J・PK・L
71 PK
72 HB・JT・JBT・J
HEXAGONAL V-Belt
73 AA・BB・CC
Perforated V-Belt
74 M・A・B・C
STARROPE®
75 Φ2〜Φ10・Φ12・Φ15
SUPER STARROPE®
76 Φ2〜Φ10・Φ12・Φ15
Round rope
Light-duty use
V rope
Adjustable belt
length , processed joint
PRENE V-ROPE
77 M・A・B
Hexagonal rope
PRENE HEXAGONAL-ROPE
78 AA・BB
Agricultural use (for vegetable harvester)
Rubber
Sponge backing type
Sponge backing
Sponge backing V-Belt
79 LA・LB・LC
Agricultural use (for straw conveyor)
Rubber
Standard type
Back protrusion for straw conveying
V-Belt with lugs
80 A・B・C
general use, Office &
Home appliance,
Coupling agricultural use
Office appliance, precision machinery
Steel
Aluminum
Cast lron
Aluminum
Flexible, Direct
Connected Power
Transmission
Shock absorption,
anti-vibration
Good attenuation performance
NOR-MEX®
81 G・FG・LG・E・FE・LE
S
82 S・SV・SX・SZ
HYPERFLEX®
83 MT・MH
Chemi-chan®
84 HAS
Selecting Power Transmission Belts and Related Products
Excellent �������������� ●
Good ������������� No Sign
Caution needed when in use ����� ▲
Not suitable ������������� −
A wide range of products are available at Mitsuboshi to suite your needs.
Refer to the following property chart when selecting belts.
Application Properties
No
High
Compactpowerdesign
trasmission
Flexibility
HighSpeed
drive
MultiPulley
Environmental Properties
Continuous
Joint
Smooth
Back side
speed
processing operation
drive
change
Back side
tension
alignment
Frequent
Heat
Cold
Water
Oil
Acid
Alkali
Ozone
Weather
start &
resistance resistance resistance resistance resistance resistance resistance resistance
stop
Noise
Vibration
No
1
●
●
●
●
一
●
▲
1
2
●
●
●
●
一
●
▲
2
3
●
●
●
▲
3
4
●
●
▲
4
5
●
●
6
●
●
●
●
7
●
●
●
8
●
●
●
9
●
●
●
10
●
●
●
11
●
●
●
●
一
●
一
一
▲
5
●
▲
6
●
▲
一
●
●
ー
●
●
8
▲
●
●
●
9
ー
●
ー
▲
10
ー
●
ー
▲
11
●
ー
12
●
●
●
●
ー
●
●
●
●
一
▲
14
●
●
●
●
一
▲
15
●
●
16
●
●
17
●
●
●
●
●
●
●
●
18
●
19
20
21
●
●
●
●
●
22
●
●
23
●
●
24
●
●
25
●
●
26
●
27
●
7
●
13
●
●
▲
一
▲
▲
●
一
▲
●
●
●
●
●
●
12
13
14
▲
15
▲
16
▲
一
●
▲
●
▲
一
●
17
●
▲
●
▲
18
▲
19
▲
▲
●
▲
▲
20
▲
▲
●
▲
▲
21
一
●
▲
▲
●
▲
▲
22
一
●
▲
▲
●
▲
▲
23
一
▲
▲
●
▲
▲
24
一
▲
▲
●
▲
▲
25
●
一
▲
▲
●
▲
▲
26
●
●
▲
▲
●
▲
▲
27
●
28
●
●
●
▲
▲
●
▲
▲
28
29
●
●
●
▲
▲
●
▲
▲
29
30
一
31
一
●
一
●
32
一
●
33
32
●
33
●
●
●
一
●
30
一
31
34
●
●
●
●
35
●
●
一
一
●
●
36
●
●
ー
ー
●
●
37
●
一
●
●
●
38
●
一
●
●
●
34
●
●
35
36
37
●
38
39
●
●
一
●
●
●
●
39
40
●
●
●
一
●
●
●
●
40
41
●
●
●
一
●
●
●
41
42
●
●
●
一
●
●
●
42
43
●
●
●
44
●
●
●
一
45
●
●
●
一
46
●
●
●
一
47
●
●
●
一
48
▲
一
49
▲
一
50
51
●
52
●
53
●
54
55
●
●
57
58
59
●
●
●
43
●
44
一
●
●
●
一
●
●
●
●
45
●
47
46
●
●
48
●
●
49
●
一
●
●
50
●
一
●
●
51
●
●
一
●
●
52
●
●
一
●
●
53
●
●
54
●
55
●
56
●
一
●
●
●
●
●
▲
●
一
●
●
一
●
●
一
一
一
一
一
一
一
一
一
一
▲
56
▲
▲
▲
▲
▲
▲
▲
▲
▲
57
●
58
59
60
▲
●
●
一
60
61
▲
●
●
一
61
62
●
●
63
64
●
●
●
●
62
一
●
一
●
●
一
●
一
●
一
●
一
●
●
63
64
65
●
66
●
●
一
●
一
●
●
66
67
●
●
一
●
一
●
●
67
68
●
●
一
●
一
●
●
68
69
●
●
●
一
●
一
●
●
69
●
●
●
一
●
一
●
●
70
●
●
●
70
●
71
●
72
●
一
●
●
73
74
▲
75
▲
●
一
●
一
●
●
一
●
一
●
▲
一
一
●
一
●
一
●
●
●
●
●
●
●
65
●
71
●
72
73
74
▲
▲
▲
▲
▲
75
76
▲
●
●
一
77
▲
●
●
一
78
▲
●
●
一
79
▲
一
一
80
▲
●
一
81
●
●
●
一
一
●
一
一
一
●
●
●
81
82
●
●
●
一
一
●
一
一
一
●
●
●
82
●
●
●
▲
▲
▲
▲
▲
76
▲
▲
▲
▲
▲
77
▲
▲
▲
▲
▲
78
79
80
83
●
●
一
一
●
一
一
一
84
●
●
一
一
●
一
一
一
●
●
●
83
●
●
84
10
■ Dimensions
Model
Cross-Sectional Dimensions
Highest Speed
(m/sec)
Type
Rubber
S2M
S3M
S5M
S8M
S14M
Pitch (mm) 2.00
3.00
5.00
8.00
14.00
9
13
22
56
125
30
30
30
30
30
Polyurethane
S2M
S3M
2.00
3.00
9
13
30 (40)
30 (40)
Rubber
MTS5M
MTS8M
MTS14M
Pitch (mm) 5.00
8.00
14.00
22
56
125
30
30
30
Polyurethane
MTS8M
Pitch (mm) 8.00
61
30
G8M
Pitch (mm) 8.000
56
30
G14M
Pitch (mm) 14.00
125
30
Rubber
MXL
XL
L
H
XH
XXH
Pitch (mm) 2.032
5.08
9.525
12.700
22.225
31.750
7
16
30
57
127
182
30
30
30
30
30
30
(40)
(40)
(40)
(40)
(40)
(40)
Polyurethane
T80
T5・DT5
T10・DT10
XL
L
Pitch (mm) 2.032
5.0
10.0
5.08
9.525
7
19
45
16
30
30
30
30
30
30
(40)
(40)
(40)
(40)
(40)
Classical V-Belt
Rubber
A
B
C
D
E
12.5×9.0×40
16.5×11.0×40
22.0×14.0×40
31.5×10.0×40
38.0×25.5×40
MAXSTAR WEDGE V-Belt
Rubber
3V
5V
8V
9.5×8.0×40
15.9×13.5×40
25.4×22.0×40
67
180
315
40
40
40
Multi MAXSTAR WEDGE V-Belt
(Joined V-Belt)
Rubber
3V
5V
8V
−
−
−
67
180
315
40
40
40
Rubber
J
PK
L
31.5 (25)
56 (50)
90 (80)
40 (50)
40 (50)
40 (50)
Polyurethane
JT・JBT
Rubber
FL
FM
FH
POLYMAX Belt
Polyurethane
3M
5M
7M
11M
MB Belt (Polyurethane V-Belt)
Polyurethane
MB
6.0×4.0×40
STARROPE®
/ SUPER STARROPE®
Polyurethane
2
3
4
5
6
7
8
9
10
12
15
Diameter φmm 2
3
4
5
6
7
8
9
10
12
15
PRENE V-ROPE
Polyurethane
M
A
B
PRENE HEXAGONAL-ROPE
Polyurethane
AA
BB
SUPER TORQUE Timing Belt
(Round tooth)
MEGA TORQUE Timing Belt
GIGA TORQUE Timing Belt
Rubber
Timing Belt
(Trapezoidal tooth)
RIBSTAR Belt
(V-Ribbed Belt)
FLEXSTAR® Belt
top width (mm)×thickness (mm)×angle (°)
Pitch (mm) 2.34
3.56
4.70
95
150
224
355
560
(67)
(118)
(180)
(300)
(450)
(40)
(40)
(40)
(40)
(40)
30
30
30
30
30
Pitch (mm) 2.34
20
30 (35)
Belt Thickness (mm) 1.5
2.5
3.5
16
40
80
40 (60)
40 (60)
40 (60)
17
26
42
67
40
40
40
40
3.0×2.0×60
5.0×3.0×60
7.0×5.0×60
11.0×7.0×60
16
10
15/ 20 SUPER
20/ 30
30/ 40
40/ 50
50/ 60
60/ 70
70/ 80
85/ 90
95/ 100
120/ 120
150/ 150
10 and below
10
10
10
10
10
10
10
10
10
10
10.0×5.5×40
12.5×8.5×40
16.5×10.5×40
40
85
100
10 and below
10
10
12.5×10.0×40
16.5×12.5×40
100
130
10 and below
10
Note 1Values in ( ) are only used under limited conditions. Avoid these values as much as possible.
The conditions of use such as pulley diameter and speed affect belt durability.
(Use the above table as a reference when selecting belts)
Note 2For V-Belt and MAXSTAR WEDGE V-Belt, values are nominal.
11
Minimum Pulley
Diameter(mm)
Material
Ⅰ S ynchronous Power
Transmission
Round Tooth Timing Belt
Belt Type, Dimensions & Product Code....... P13
SUPER TORQUE Timing Belt G ............ P14〜16
SUPER TORQUE Timing Pulley. ................... P17
MEGA TORQUE Timing Belt G&U . ......... P18,19
Mega Torque GⅡ. .......................................... P20
Mega Torque EX............................................. P21
Giga Torque GX. ............................................. P22
H Series .......................................................... P23
Trapezoidal Tooth Timing Belt
Belt Type, Dimensions & Product Code ...... P24
green eco® Series........................................... P25
Timing Belt G .......................................... P26〜28
Timing Belt U .......................................... P29〜31
LONG-SPAN Timing Belt… …………………… P32
Timing Pulley ………………………………… P33, 34
Synchronous Power
Transmission
Round Tooth Timing Belt
Belt Type, Dimensions & Product Code
Minimum Pulley Size
Product Code
Ⅰ Synchronous Power
Transmission
Pitch Line
GB
Belt
Belt Type
GB Type
(bare back)
Nominal Length (mm)
Belt Tooth Pitch 2mm
Belt Width(mm)x10 U(polyurethane)
Type
Pitch Line
GB
Belt
Belt Tooth Pitch 3mm
Belt Type GB Type
(bare back)
Nominal Length (mm)
Belt Width(mm)x10 U(polyurethane)
Type
Pitch Line
GB
Belt
Belt Tooth Pitch 5mm
Belt Type GB Type
(bare back)
Nominal Length (mm)
Belt Width(mm)x10
Belt Width
(mm)x10
Nominal
Length (mm)
56.02
Belt Type
Belt Tooth Pitch 8mm
Type
Belt Width
(mm)x10
Belt Tooth Pitch 14mm
Nominal
Length (mm)
Belt Type
Type
*1 M
inimum pulley diameter / number of teeth depend on revoluation.
Use Timing belt catalogue for design.
13
124.78
28
Synchronous Power
Transmission
SUPER TORQUE Timing Belt G
Since the round tooth shape allows smooth meshing with pulleys, this belt
is the most suitable for applications which require high-accuracy and
smooth revolution such as computers and office appliances.
●
●
●
●
Improved flexibility of this belt enables use of smaller diameter pulleys
Smooth meshing allows noiseless operation
Usable with low shaft load
Possible to transmit high torque with a small belt.
Standard Belt Sizes
Manufacturable Size
Product Code
GB
Manufacturable Size
Product Code
GB
66
72
74
76
78
80
84
86
88
90
33
36
37
38
39
40
42
43
44
45
66
72
74
76
78
80
84
86
88
90
○
○
○
○
○
−
○
○
○
−
−
−
−
−
−
○
−
−
−
○
S2M 320
S2M 322
S2M 324
S2M 326
S2M 328
S2M 330
S2M 334
S2M 338
S2M 340
S2M 342
160
161
162
163
164
165
167
169
170
171
320
322
324
326
328
330
334
338
340
342
○
○
○
○
○
○
○
○
○
○
○
−
−
−
−
○
−
−
−
−
S2M
98
S2M 100
S2M 102
S2M 104
S2M 106
S2M 108
S2M 110
S2M 112
S2M 114
S2M 116
49
50
51
52
53
54
55
56
57
58
98
100
102
104
106
108
110
112
114
116
○
○
○
○
○
○
○
○
○
○
○
○
−
−
−
−
−
○
○
−
S2M 344
S2M 350
S2M 354
S2M 360
S2M 364
S2M 370
S2M 372
S2M 374
S2M 376
S2M 380
172
175
177
180
182
185
186
187
188
190
344
350
354
360
364
370
372
374
376
380
○
○
○
○
○
○
○
○
○
○
−
−
−
○
−
○
−
−
−
−
S2M 118
S2M 120
S2M 122
S2M 124
S2M 126
S2M 128
S2M 130
S2M 132
S2M 134
S2M 136
59
60
61
62
63
64
65
66
67
68
118
120
122
124
126
128
130
132
134
136
○
○
○
○
○
○
○
○
○
○
○
○
○
−
○
−
○
−
−
−
S2M 386
S2M 390
S2M 396
S2M 400
S2M 402
S2M 408
S2M 410
S2M 420
S2M 426
S2M 430
193
195
198
200
201
204
205
210
213
215
386
390
396
400
402
408
410
420
426
430
○
○
○
○
○
○
○
○
○
○
−
−
○
−
−
−
−
−
−
−
S2M 138
S2M 140
S2M 142
S2M 144
S2M 146
S2M 148
S2M 150
S2M 152
S2M 156
S2M 158
69
70
71
72
73
74
75
76
78
79
138
140
142
144
146
148
150
152
156
158
○
○
○
○
○
○
○
○
○
○
○
○
−
○
−
−
−
○
−
○
S2M 434
S2M 436
S2M 438
S2M 440
S2M 442
S2M 444
S2M 448
S2M 452
S2M 456
S2M 460
217
218
219
220
221
222
224
226
228
230
434
436
438
440
442
444
448
452
456
460
○
○
○
○
○
○
○
○
○
○
−
○
−
−
−
−
○
−
−
−
S2M 160
S2M 164
S2M 166
S2M 168
S2M 170
S2M 172
S2M 174
S2M 176
S2M 178
S2M 180
80
82
83
84
85
86
87
88
89
90
160
164
166
168
170
172
174
176
178
180
○
○
○
○
○
○
○
○
○
○
○
○
○
−
−
○
−
−
−
−
S2M 464
S2M 468
S2M 474
S2M 476
S2M 480
S2M 486
S2M 488
S2M 494
S2M 500
S2M 520
232
234
237
238
240
243
244
247
250
260
464
468
474
476
480
486
488
494
500
520
○
○
○
○
○
○
−
○
○
○
−
−
−
−
−
○
○
−
−
○
S2M 182
S2M 184
S2M 186
S2M 188
S2M 190
S2M 192
S2M 194
S2M 196
S2M 198
S2M 200
91
92
93
94
95
96
97
98
99
100
182
184
186
188
190
192
194
196
198
200
○
○
○
○
○
○
○
○
○
○
−
−
−
−
○
−
○
−
−
○
S2M 524
S2M 530
S2M 550
S2M 560
S2M 572
S2M 580
S2M 586
S2M 594
S2M 600
S2M 630
262
265
275
280
286
290
293
297
300
315
524
530
550
560
572
580
586
594
600
630
○
○
○
○
○
−
○
○
○
○
−
−
−
○
○
○
−
−
−
○
S2M 202
S2M 204
S2M 206
S2M 208
S2M 210
S2M 212
S2M 214
S2M 216
S2M 218
S2M 220
101
102
103
104
105
106
107
108
109
110
202
204
206
208
210
212
214
216
218
220
○
○
○
○
○
○
○
○
−
○
−
−
−
−
○
○
−
−
○
○
S2M 638
S2M 648
S2M 656
S2M 660
S2M 672
S2M 676
S2M 694
S2M 710
S2M 726
S2M 740
319
324
328
330
336
338
347
355
363
370
638
648
656
660
672
676
694
710
726
740
○
○
○
○
○
○
○
○
○
○
−
−
−
−
−
−
−
−
−
−
S2M 224
S2M 226
S2M 230
S2M 232
S2M 234
S2M 236
S2M 238
S2M 240
S2M 242
S2M 244
S2M 246
112
113
115
116
117
118
119
120
121
122
123
224
226
230
232
234
236
238
240
242
244
246
○
○
○
○
○
○
○
○
−
○
○
○
−
○
−
−
○
−
○
○
○
○
752
S2M S2M 772
S2M 778
S2M 796
S2M 800
S2M 810
S2M 822
S2M 826
S2M 828
S2M 848
376
386
389
398
400
405
411
413
414
424
752
772
778
796
800
810
822
826
828
848
○
○
○
○
○
○
○
○
○
○
−
−
−
−
−
−
−
−
−
−
S2M 248
S2M 250
S2M 252
S2M 254
S2M 256
S2M 258
S2M 260
S2M 262
S2M 264
S2M 266
124
125
126
127
128
129
130
131
132
133
248
250
252
254
256
258
260
262
264
266
○
○
○
○
○
○
○
○
○
○
−
○
−
−
−
−
○
−
−
−
S2M 856
S2M 862
S2M 866
S2M 880
S2M 882
S2M 898
S2M 900
S2M 910
S2M 930
S2M 944
428
431
433
440
441
449
450
455
465
472
856
862
866
880
882
898
900
910
930
944
○
○
○
○
○
○
○
○
○
○
−
−
−
−
−
−
−
−
−
−
S2M 268
S2M 270
S2M 272
S2M 276
S2M 278
S2M 280
S2M 284
S2M 286
S2M 288
S2M 290
134
135
136
138
139
140
142
143
144
145
268
270
272
276
278
280
284
286
288
290
○
○
○
○
○
○
○
○
○
○
−
−
−
−
−
○
−
−
−
○
S2M 950
S2M 976
S2M 984
S2M 1016
S2M 1032
S2M 1062
S2M 1064
S2M 1066
S2M 1100
S2M 1136
475
488
492
508
516
531
532
533
550
568
950
976
984
1,016
1,032
1,062
1,064
1,066
1,100
1,136
○
○
○
○
−
○
○
○
○
○
−
−
○
−
○
−
−
−
−
−
S2M 292
S2M 296
S2M 300
S2M 302
S2M 304
S2M 306
S2M 308
S2M 310
S2M 312
S2M 316
S2M 318
146
148
150
151
152
153
154
155
156
158
159
292
296
300
302
304
306
308
310
312
316
318
○
○
○
○
○
○
○
○
○
○
○
−
−
−
−
−
−
−
−
−
−
−
S2M 1140
S2M 1196
S2M 1224
S2M 1250
S2M 1274
S2M 1290
S2M 1330
S2M 1420
S2M 1516
S2M 1524
570
598
612
625
637
645
665
710
758
762
1,140
1,196
1,224
1,250
1,274
1,290
1,330
1,420
1,516
1,524
○
○
○
○
○
○
○
○
○
○
−
○
−
○
−
−
−
−
−
−
S2M 1878
S2M 2130
939
1,065
1,878
2,130
○
○
−
−
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
S2M
For S2M and S3M, polyurethane (U) and rubber (GB) models are available.
Choose the appropriate material for your application.
GB
Sizes not indicated above are also available under limited conditions.
Ⅰ Synchronous Power
Transmission
Code(width)
14
Synchronous Power
Transmission
SUPER TORQUE Timing Belt G
Standard Belt Sizes
Code(width)
Manufacturable Size
Ⅰ Synchronous Power
Transmission
Product Code
15
S3M 96
S3M 102
S3M 114
S3M 117
S3M 120
S3M 123
S3M 129
S3M 132
S3M 135
S3M 141
32
34
38
39
40
41
43
44
45
47
96
102
114
117
120
123
129
132
135
141
S3M 144
S3M 147
S3M 150
S3M 156
S3M 159
S3M 162
S3M 168
S3M 171
S3M 174
S3M 177
48
49
50
52
53
54
56
57
58
59
S3M 180
S3M 186
S3M 189
S3M 192
S3M 195
S3M 198
S3M 201
S3M 204
S3M 207
S3M 210
GB
Manufacturable Size
Product Code
○
○
○
○
○
○
○
○
○
○
−
−
−
−
−
−
−
−
−
○
(D) S3M 516
(D) S3M 519
(D) S3M 522
(D) S3M 525
(D) S3M 528
(D) S3M 537
(D) S3M 540
(D) S3M 543
(D) S3M 549
(D) S3M 552
172
173
174
175
176
179
180
181
183
184
516
519
522
525
528
537
540
543
549
552
144
147
150
156
159
162
168
171
174
177
○
○
○
○
○
○
○
○
○
○
○
−
−
−
−
○
−
−
○
○
(D) S3M 558
S3M 561
(D) S3M 564
S3M 570
(D) S3M 573
S3M 576
(D) S3M 579
S3M 582
(D) S3M 588
(D) S3M 591
186
187
188
190
191
192
193
194
196
197
60
62
63
64
65
66
67
68
69
70
180
186
189
192
195
198
201
204
207
210
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
−
○
−
−
○
(D) S3M 597
(D) S3M 600
(D) S3M 603
(D) S3M 609
(D) S3M 612
(D) S3M 621
S3M 624
633
(D) S3M (D) S3M 642
645
(D) S3M S3M 213
S3M 216
S3M 219
S3M 222
S3M 225
S3M 228
S3M 231
S3M 234
S3M 237
S3M 246
71
72
73
74
75
76
77
78
79
82
213
216
219
222
225
228
231
234
237
246
○
○
○
○
○
○
○
○
○
○
○
−
○
−
○
−
−
−
−
○
S3M 249
S3M 252
S3M 255
S3M 258
S3M 261
S3M 264
S3M 267
S3M 270
S3M 273
S3M 276
83
84
85
86
87
88
89
90
91
92
249
252
255
258
261
264
267
270
273
276
○
○
○
○
○
○
○
○
○
○
S3M 279
S3M 282
S3M 285
S3M 288
(D) S3M 291
300
(D) S3M 303
(D) S3M S3M 306
(D)
309
(D) S3M (D) S3M 312
93
94
95
96
97
100
101
102
103
104
279
282
285
288
291
300
303
306
309
312
(D) S3M 315
(D) S3M 318
S3M 324
(D) S3M 327
(D) S3M 330
(D) S3M 333
(D) S3M 339
S3M 342
345
(D) S3M S3M 348
105
106
108
109
110
111
113
114
115
116
(D) S3M 351
(D) S3M 354
S3M 360
S3M 363
366
(D) S3M 369
(D) S3M 372
(D) S3M 375
(D) S3M S3M 378
384
(D) S3M GB
Product Code
○
○
○
○
○
○
○
○
○
○
−
○
−
−
−
○
○
−
−
−
S5M 225
S5M 255
S5M 260
S5M 295
S5M 300
S5M 305
S5M 320
S5M 325
S5M 340
S5M 350
45
51
52
59
60
61
64
65
68
70
225
255
260
295
300
305
320
325
340
350
558
561
564
570
573
576
579
582
588
591
○
○
○
○
○
○
○
○
○
○
−
−
○
−
−
−
−
−
−
○
199
200
201
203
204
207
208
211
214
215
597
600
603
609
612
621
624
633
642
645
○
○
○
○
○
○
○
○
○
○
−
○
−
−
−
−
−
○
−
○
375
(D) S5M 380
(D) S5M 390
(D) S5M S5M 395
(D) S5M 400
S5M 410
(D) S5M 425
(D) S5M 435
(D) S5M 440
(D) S5M 450
75
76
78
79
80
82
85
87
88
90
375
380
390
395
400
410
425
435
440
450
648
(D) S3M (D) S3M 657
660
(D) S3M 663
(D) S3M 666
(D) S3M (D) S3M 669
(D) S3M 672
681
(D) S3M (D) S3M 687
(D) S3M 693
216
219
220
221
222
223
224
227
229
231
648
657
660
663
666
669
672
681
687
693
○
○
○
○
○
○
○
○
○
○
−
−
−
−
−
−
−
○
−
−
(D) S5M 460
S5M 470
(D) S5M 475
(D) S5M 490
(D) S5M 500
520
(D) S5M 525
(D) S5M (D) S5M 530
(D) S5M 545
550
(D) S5M 92
94
95
98
100
104
105
106
109
110
460
470
475
490
500
520
525
530
545
550
○
○
○
−
−
○
−
−
−
○
699
(D) S3M 720
(D) S3M 726
(D) S3M 741
(D) S3M (D) S3M 744
(D) S3M 750
(D) S3M 753
756
(D) S3M (D) S3M 759
(D) S3M 762
233
240
242
247
248
250
251
252
253
254
699
720
726
741
744
750
753
756
759
762
○
○
○
○
○
○
○
○
○
○
−
−
−
○
−
○
−
−
−
−
(D) S5M 560
(D) S5M 575
(D) S5M 590
(D) S5M 595
600
(D) S5M (D) S5M 615
625
(D) S5M S5M 640
650
(D) S5M 665
(D) S5M 112
115
118
119
120
123
125
128
130
133
560
575
590
595
600
615
625
640
650
665
○
○
○
○
○
○
○
○
○
○
−
−
−
○
−
○
−
−
−
○
(D) S3M 765
(D) S3M 771
774
(D) S3M (D) S3M 786
789
(D) S3M 804
(D) S3M 810
(D) S3M 819
(D) S3M 825
(D) S3M S3M 831
255
257
258
262
263
268
270
273
275
277
765
771
774
786
789
804
810
819
825
831
○
○
○
○
○
○
○
○
○
○
−
−
−
−
−
−
−
−
−
−
670
(D) S5M 675
(D) S5M 690
(D) S5M 695
(D) S5M 700
(D) S5M 710
(D) S5M (D) S5M 720
725
(D) S5M 730
(D) S5M (D) S5M 740
134
135
138
139
140
142
144
145
146
148
670
675
690
695
700
710
720
725
730
740
315
318
324
327
330
333
339
342
345
348
○
○
○
○
○
○
○
○
○
○
−
○
−
○
−
−
−
−
○
−
(D) S3M 837
852
(D) S3M 858
(D) S3M 882
(D) S3M (D) S3M 888
894
(D) S3M 900
(D) S3M 909
(D) S3M (D) S3M 918
927
(D) S3M 279
284
286
294
296
298
300
303
306
309
837
852
858
882
888
894
900
909
918
927
○
○
○
○
○
○
○
○
○
○
−
−
−
−
−
−
−
−
−
−
(D) S5M 750
(D) S5M 765
780
(D) S5M 800
(D) S5M (D) S5M 810
830
(D) S5M (D) S5M 845
850
(D) S5M (D) S5M 870
(D) S5M 890
150
153
156
160
162
166
169
170
174
178
750
765
780
800
810
830
845
850
870
890
117
118
120
121
122
123
124
125
126
128
351
354
360
363
366
369
372
375
378
384
○
○
○
○
○
○
○
○
−
○
−
−
○
○
−
○
−
○
○
−
(D) S3M 936
S3M 954
S3M 963
(D) S3M 999
(D) S3M 1005
(D) S3M 1014
1017
(D) S3M (D) S3M 1035
(D) S3M 1050
(D) S3M 1080
312
318
321
333
335
338
339
345
350
360
936
954
963
999
1,005
1,014
1,017
1,035
1,050
1,080
○
○
○
○
○
○
○
○
○
○
−
−
−
−
−
−
−
−
−
−
900
(D) S5M S5M 930
950
(D) S5M S5M 965
(D) S5M 975
S5M 980
(D) S5M 1000
1025
(D) S5M (D) S5M 1050
(D) S5M 1055
180
186
190
193
195
196
200
205
210
211
900
930
950
965
975
980
1,000
1,025
1,050
1,055
387
(D) S3M 396
(D) S3M 399
(D) S3M S3M 402
405
(D) S3M 408
(D) S3M 414
(D) S3M (D) S3M 417
(D) S3M 420
S3M 423
129
132
133
134
135
136
138
139
140
141
387
396
399
402
405
408
414
417
420
423
○
○
○
○
○
○
○
○
○
○
○
○
−
○
○
○
−
−
○
−
S3M 1113
(D) S3M 1119
(D) S3M 1146
(D) S3M 1152
(D) S3M 1170
1176
(D) S3M (D) S3M 1188
(D) S3M 1203
(D) S3M 1221
1236
(D) S3M 371
373
382
384
390
392
396
401
407
412
1,113
1,119
1,146
1,152
1,170
1,176
1,188
1,203
1,221
1,236
○
○
○
○
○
○
○
○
○
○
−
−
−
−
−
−
−
−
−
−
(D) S5M 1085
(D) S5M 1090
(D) S5M 1100
1105
(D) S5M 1115
(D) S5M 1120
(D) S5M (D) S5M 1125
(D) S5M 1135
(D) S5M 1145
(D) S5M 1160
217
218
220
221
223
224
225
227
229
232
1,085
1,090
1,100
1,105
1,115
1,120
1,125
1,135
1,145
1,160
(D) S3M 426
(D) S3M 432
(D) S3M 435
(D) S3M 444
(D) S3M 447
(D) S3M 453
(D) S3M 456
(D) S3M 459
(D) S3M 468
(D) S3M 471
142
144
145
148
149
151
152
153
156
157
426
432
435
444
447
453
456
459
468
471
○
○
○
○
○
○
○
○
○
○
−
○
−
−
−
○
−
○
−
−
1245
(D) S3M 1260
(D) S3M (D) S3M 1290
(D) S3M 1299
S3M 1305
(D) S3M 1326
(D) S3M 1332
(D) S3M 1374
S3M 1401
(D) S3M 1419
415
420
430
433
435
442
444
458
467
473
1,245
1,260
1,290
1,299
1,305
1,326
1,332
1,374
1,401
1,419
○
○
○
○
○
○
○
○
○
○
−
−
−
−
−
−
−
−
−
−
(D) S5M 1165
(D) S5M 1195
S5M 1200
(D) S5M 1225
(D) S5M 1250
(D) S5M 1270
S5M 1290
S5M 1295
(D) S5M 1350
(D) S5M 1420
233
239
240
245
250
254
258
259
270
284
1,165
1,195
1,200
1,225
1,250
1,270
1,290
1,295
1,350
1,420
474
(D) S3M (D) S3M 480
S3M 483
(D) S3M 486
S3M 489
(D) S3M 492
(D) S3M 498
(D) S3M 501
(D) S3M 504
(D) S3M 507
158
160
161
162
163
164
166
167
168
169
474
480
483
486
489
492
498
501
504
507
○
○
○
○
○
○
○
○
○
○
○
−
○
−
−
−
−
○
−
−
S3M 1422
(D) S3M 1461
(D) S3M 1521
S3M 1560
(D) S3M 1596
S3M 1650
(D) S3M 1680
(D) S3M 1788
(D) S3M 2100
(D) S3M 2115
474
487
507
520
532
550
560
596
700
705
1,422
1,461
1,521
1,560
1,596
1,650
1,680
1,788
2,100
2,115
○
○
○
−
○
○
○
○
○
○
−
−
−
○
−
−
−
−
−
−
(D) S5M 1475
(D) S5M 1500
S5M 1505
(D) S5M 1530
(D) S5M 1595
(D) S5M 1605
S5M 1615
(D) S5M 1680
(D) S5M 1690
(D) S5M 1715
295
300
301
306
319
321
323
336
338
343
1,475
1,500
1,505
1,530
1,595
1,605
1,615
1,680
1,690
1,715
(D) S3M 510
(D) S3M 513
170
171
510
513
○
○
−
−
2250
(D) S3M 750
2,250
○
−
(D) S5M 1800
(D) S5M 1945
(D) S5M 2000
(D) S5M 2145
(D) S5M 2255
S5M 2480
(D) S5M 2525
(D) S5M 2980
(D) S5M 3090
360
389
400
429
451
496
505
596
618
1,800
1,945
2,000
2,145
2,255
2,480
2,525
2,980
3,090
For S1.5M, S2M, and S3M, polyurethane (U) and rubber (GB) models are available. Choose the appropriate material for your application.
GB
Synchronous Power
Transmission
SUPER TORQUE Timing Belt G
Since this round tooth belt has a high power transmission
property, it expands existing applications of timing belts
significantly.
Also, it can be used as an alternative for chains and gears.
●
●
●
●
It can be used in wide applications since it has a higher power transmission.
Longer operating life
Quiet operation
Cost-Efficient
Code(width)
Product Code
Product Code
(D)
(D)
(D)
(D)
(D)
(D)
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
376
400
408
440
480
496
512
520
528
560
47
50
51
55
60
62
64
65
66
70
376
400
408
440
480
496
512
520
528
560
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
584
600
632
640
656
680
712
720
760
800
73
75
79
80
82
85
89
90
95
100
584
600
632
640
656
680
712
720
760
800
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
824
840
848
856
880
896
912
920
928
944
103
105
106
107
110
112
114
115
116
118
824
840
848
856
880
896
912
920
928
944
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
952
960
976
984
1000
1024
1040
1056
1080
1120
119
120
122
123
125
128
130
132
135
140
952
960
976
984
1,000
1,024
1,040
1,056
1,080
1,120
(D)
(D)
(D)
(D)
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
1128
1136
1152
1160
1184
1200
1216
1224
1248
1256
141
142
144
145
148
150
152
153
156
157
1,128
1,136
1,152
1,160
1,184
1,200
1,216
1,224
1,248
1,256
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
1280
1296
1304
1312
1320
1352
1360
1384
1400
1424
160
162
163
164
165
169
170
173
175
178
1,280
1,296
1,304
1,312
1,320
1,352
1,360
1,384
1,400
1,424
(D)
(D)
(D)
(D)
(D)
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
1440
1480
1488
1520
1552
1600
1640
1648
1680
1696
180
185
186
190
194
200
205
206
210
212
1,440
1,480
1,488
1,520
1,552
1,600
1,640
1,648
1,680
1,696
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
1728
1760
1776
1792
1800
1816
1832
1880
1912
1960
216
220
222
224
225
227
229
235
239
245
1,728
1,760
1,776
1,792
1,800
1,816
1,832
1,880
1,912
1,960
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
2000
2040
2048
2064
2104
2120
2160
2240
2272
2304
250
255
256
258
263
265
270
280
284
288
2,000
2,040
2,048
2,064
2,104
2,120
2,160
2,240
2,272
2,304
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
2376
2400
2496
2600
2800
2920
2944
3048
3200
297
300
312
325
350
365
368
381
400
2,376
2,400
2,496
2,600
2,800
2,920
2,944
3,048
3,200
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
S8M
S8M
S8M
S8M
S8M
S8M
S8M
S8M
3248
3272
3440
3680
3720
3904
3928
4400
406
409
430
460
465
488
491
550
3,248
3,272
3,440
3,680
3,720
3,904
3,928
4,400
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
S14M 1008
S14M 1120
S14M 1190
S14M 1246
S14M 1288
(D)
S14M 1400
(D)
S14M 1470
(D)
S14M 1540
(D)
S14M 1610
(D)
S14M 1652
72
80
85
89
92
100
105
110
115
118
1,008
1,120
1,190
1,246
1,288
1,400
1,470
1,540
1,610
1,652
(D)
S14M 1708
(D)
S14M 1736
(D)
S14M 1750
(D)
S14M 1778
(D)
S14M 1806
(D)
S14M 1890
(D)
S14M 1932
(D)
S14M 1960
(D)
S14M 2002
(D)
S14M 2100
122
124
125
127
129
135
138
140
143
150
1,708
1,736
1,750
1,778
1,806
1,890
1,932
1,960
2,002
2,100
(D)
S14M 2198
(D)
S14M 2240
(D)
S14M 2310
(D)
S14M 2380
(D)
S14M 2450
(D)
S14M 2506
(D)
S14M 2590
(D)
S14M 2660
(D)
S14M 2800
(D)
S14M 3150
157
160
165
170
175
179
185
190
200
225
2,198
2,240
2,310
2,380
2,450
2,506
2,590
2,660
2,800
3,150
(D)
S14M 3360
(D)
S14M 3500
(D)
S14M 3556
(D)
S14M 3850
(D)
S14M 4004
(D)
S14M 4508
(D)
S14M 5012
240
250
254
275
286
322
358
3,360
3,500
3,556
3,850
4,004
4,508
5,012
Ⅰ Synchronous Power
Transmission
Standard Belt Sizes
16
Synchronous Power
Transmission
SUPER TORQUE Timing Pulley
Timing belt power transmission system works the best when belt and
pulley smoothly mesh with each other.
Our SUPER TORQUE Timing Pulley is made with specially formed
tooth shape and fine finishing.
Pulley Product Code Example:
P 28 S5M 0100 B
Pulley
No. of Pulley Teeth
Ⅰ Synchronous Power
Transmission
SUPER TORQUE Standard Pulley Types and Sizes
✫ We add aluminum as a standard pulley for S3M and S5M
Belt Type
Standard Sizes
Materials
Pulley Types
Rod Shape
Rod Shape
Shape is a 100mm long round cylinder product.
22 teeth and below sizes of S3M are available only in rod shape and C type. Also, 24 teeth and
above sizes are available only in A or B type.
Belt Type
18S8M
18
19S8M
19
20S8M
20
21S8M
21
22S8M
22
24S8M
24
25S8M
25
26S8M
26
28S8M
28
30S8M
30
32S8M
32
34S8M
34
36S8M
36
38S8M
38
40S8M
40
44S8M
44
48S8M
48
50S8M
50
60S8M
60
72S8M
(72)
84S8M
(84)
96S8M
(96)
(120) 120S8M
45.84
48.38
50.93
53.48
56.02
61.12
63.66
66.21
71.30
76.39
81.49
86.58
91.67
96.77
101.86
112.05
122.23
127.32
152.79
183.35
213.90
244.46
305.58
44.46
47.01
49.56
52.10
54.65
59.74
62.29
64.84
69.93
75.02
80.12
85.21
90.30
95.39
100.49
110.67
120.86
125.95
151.42
181.97
212.53
243.09
304.21
15・25・
30・40
15・25・
30・40・60
−
−
−
−
−
28
−
30
−
32
−
34
−
36
−
40
−
42
−
44
−
48
−
50
−
56
−
(60)
−
(64)
−
(72)
−
−
−
−
−
15・25・40・60
P
P
P
P
P
P
P
P
P
P
P
P
P
P
28S14M
30S14M
32S14M
34S14M
36S14M
40S14M
42S14M
44S14M
48S14M
50S14M
56S14M
60S14M
64S14M
72S14M
124.78
133.69
142.60
151.52
160.43
178.25
187.17
196.08
213.90
222.82
249.55
267.38
285.21
320.86
121.98
130.90
139.81
148.72
157.63
175.46
184.37
193.28
211.11
220.02
246.76
264.59
282.41
318.06
40・60・80
40・60
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
40・60
25・40・60
we revised the standard item lists in April, 2006.
A and B types are made from steel whereas W type is made from cast metal.
17
Pulley Type
Pulley Width Code
(Belt With (mm) x10)
Belt Type
Synchronous Power
Transmission
MEGA TORQUE Timing Belt G&U
Characteristics of low/high speed torque timing belt
‘MEGA TORQUE’ :
MEGA TORQUE
Timing Belt U
MEGA TORQUE Timing Belt G
Standard Belt Sizes
MTS5M(Pitch 5mm)
- Tooth Shape & Product Code -
Product Code
Belt Width Code
Belt Width Code
Belt Width Code
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
225
255
260
295
300
305
320
325
340
350
370
375
380
390
400
410
425
435
440
450
460
470
475
490
500
520
525
530
545
550
560
575
590
595
600
615
625
640
650
665
670
675
690
695
700
710
720
725
730
740
750
765
780
800
810
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
No. of Teeth
Product Code
45
51
52
59
60
61
64
65
68
70
74
75
76
78
80
82
85
87
88
90
92
94
95
98
100
104
105
106
109
110
112
115
118
119
120
123
125
128
130
133
134
135
138
139
140
142
144
145
146
148
150
153
156
160
162
MTS5M 830 G
MTS5M 845 G
MTS5M 850 G
MTS5M 870 G
MTS5M 890 G
MTS5M 900 G
MTS5M 930 G
MTS5M 950 G
MTS5M 965 G
MTS5M 975 G
MTS5M 980 G
MTS5M 1000 G
MTS5M 1025 G
MTS5M 1050 G
MTS5M 1055 G
MTS5M 1085 G
MTS5M 1090 G
MTS5M 1100 G
MTS5M 1105 G
MTS5M 1115 G
MTS5M 1120 G
MTS5M 1125 G
MTS5M 1135 G
MTS5M 1145 G
MTS5M 1160 G
MTS5M 1165 G
MTS5M 1195 G
MTS5M 1200 G
MTS5M 1225 G
MTS5M 1250 G
MTS5M 1270 G
MTS5M 1290 G
MTS5M 1295 G
MTS5M 1350 G
MTS5M 1420 G
MTS5M 1475 G
MTS5M 1500 G
MTS5M 1505 G
MTS5M 1530 G
MTS5M 1595 G
MTS5M 1605 G
MTS5M 1615 G
MTS5M 1680 G
MTS5M 1690 G
MTS5M 1715 G
MTS5M 1800 G
MTS5M 1945 G
MTS5M 2000 G
MTS5M 2145 G
MTS5M 2255 G
MTS5M 2480 G
MTS5M 2525 G
MTS5M 2980 G
MTS5M 3090 G
No. of Teeth
166
169
170
174
178
180
186
190
193
195
196
200
205
210
211
217
218
220
221
223
224
225
227
229
232
233
239
240
245
250
254
258
259
270
284
295
300
301
306
319
321
323
336
338
343
360
389
400
429
451
496
505
596
618
Ⅰ Synchronous Power
Transmission
MEGA TORQUE
Timing Belt G
●Large transmission capacity is achievable, at about 2 times
that of SUPER TORQUE G (Rubber)
(variation subject to pulley diameter and revolution speed).
●Compact design possible.Compared to SUPER TORQUE G
(Rubber), width is approximately 40% smaller on average for the
same pulley diameter.
●Pulley of existing models can be used. SUPER TORQUE (S8M,
S14M) pulleys can be used as per usual.
∗ Please contact us regarding pulley for MTS5M.
18
Synchronous Power
Transmission
MEGA TORQUE Timing Belt G&U
MEGA TORQUE Timing Belt U
Ⅰ Synchronous Power
Transmission
Standard Belt Sizes
MTS8M (Pitch 8 mm)
Product Code
No. of Teeth
MTS8M 528 G
MTS8M 560 G
MTS8M 584 G
MTS8M 600 G
MTS8M 632 G
MTS8M 640 G
MTS8M 656 G
MTS8M 712 G
MTS8M 720 G
MTS8M 760 G
MTS8M 800 G
MTS8M 824 G
MTS8M 840 G
MTS8M 848 G
MTS8M 856 G
MTS8M 880 G
MTS8M 896 G
MTS8M 912 G
MTS8M 920 G
MTS8M 928 G
MTS8M 944 G
MTS8M 952 G
MTS8M 960 G
MTS8M 976 G
MTS8M 984 G
MTS8M 1000 G
MTS8M 1024 G
MTS8M 1040 G
MTS8M 1056 G
MTS8M 1080 G
MTS8M 1120 G
MTS8M 1128 G
MTS8M 1136 G
MTS8M 1152 G
MTS8M 1160 G
MTS8M 1184 G
MTS8M 1200 G
MTS8M 1216 G
MTS8M 1224 G
MTS8M 1248 G
MTS8M 1256 G
MTS8M 1280 G
MTS8M 1296 G
MTS8M 1304 G
MTS8M 1312 G
MTS8M 1320 G
MTS8M 1352 G
MTS8M 1360 G
MTS8M 1384 G
66
70
73
75
79
80
82
89
90
95
100
103
105
106
107
110
112
114
115
116
118
119
120
122
123
125
128
130
132
135
140
141
142
144
145
148
150
152
153
156
157
160
162
163
164
165
169
170
173
MTS14M (Pitch 14 mm)
Product Code
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
1400
1424
1440
1480
1488
1520
1552
1600
1640
1648
1680
1696
1728
1760
1776
1792
1800
1816
1832
1880
1912
1960
2000
2040
2048
2064
2104
2120
2160
2240
2272
2304
2376
2400
2496
2600
2800
2920
2944
3048
3200
3248
3272
3440
3680
3720
3904
3928
4400
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
No. of Teeth
175
178
180
185
186
190
194
200
205
206
210
212
216
220
222
224
225
227
229
235
239
245
250
255
256
258
263
265
270
280
284
288
297
300
312
325
350
365
368
381
400
406
409
430
460
465
488
491
550
Product Code
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
1008
1120
1190
1246
1288
1400
1470
1540
1610
1652
1708
1736
1750
1778
1806
1890
1932
1960
2002
2100
2198
2240
2310
2380
2450
2506
2590
2660
2800
3150
3360
3500
3556
3850
4004
4508
5012
No. of Teeth
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
72
80
85
89
92
100
105
110
115
118
122
124
125
127
129
135
138
140
143
150
157
160
165
170
175
179
185
190
200
225
240
250
254
275
286
322
358
- Tooth Shape & Product Code -
Reinforcement
Fabric
Standard Belt Sizes
MTS8M (Pitch 8 mm)
Product Code
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
∗MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
∗MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
∗MTS8M
∗MTS8M
● Total
19
560
600
640
680
720
760
800
848
896
960
1000
1056
1120
1200
1280
1328
1360
1440
1520
1600
1696
1792
1888
No. of Teeth
70
75
80
85
90
95
100
106
112
120
125
132
140
150
160
166
170
180
190
200
212
224
236
thickness of belt sizes with ∗ mark is 4.8mm.
Synchronous Power
Transmission
Characteristics and advantages of Extra High Torque Timing Belt
● Extra larger power transmission capacity
New material cord minimizes belt stretch and produces high
power transmission capacity. Power transmission capacity is 1.5
times of MEGA TORQUE G .
● Long operation life
Introducing anti-abrasive low friction fabric brings high durability
at higher torque. Belt life is 2 times longer than MEGA TORQUE G.
● Low noise
Running noise is reduced by 18% from regular timing belt
whenyou use specially designed pulley and narrower width belt.
* Specially designed pulley is required.
.10
5.30
.20
5.30
R9
3.05
R5
10.20
9.10
5.20
Belt tooth pitch 14mm
Belt tooth pitch 8mm
Standard Belt Width
Standard Belt Width
Belt Width Code
Belt Width (mm)
Belt Width Code
Belt Width (mm)
150
15
400
40
250
25
600
60
300
30
800
80
400
40
1000
100
1200
120
60
600
250 MT S8M
Belt Width
(mm)x10
Ⅰ Synchronous Power
Transmission
●MTS14M
●MTS8M
MEGA
TORQUE
600 MT S14M 2100 G2
1680 G2
Belt Type Belt Length
G2
(mm)
Specification
Belt Width
MEGA
(mm)x10 TORQUE
Belt Type
Belt Length
G2
(mm)
Specification
Standard Belt Sizes
MTS8M (Pitch 8 mm)
Product Code
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
528
560
584
600
632
640
656
712
720
760
800
824
840
848
856
880
896
912
920
928
944
952
960
976
984
No. of Teeth
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
66
70
73
75
79
80
82
89
90
95
100
103
105
106
107
110
112
114
115
116
118
119
120
122
123
Product Code
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
1000
1024
1040
1056
1080
1120
1128
1136
1152
1160
1184
1200
1216
1224
1248
1256
1280
1296
1304
1312
1320
1352
1360
1384
1400
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
No. of Teeth
125
128
130
132
135
140
141
142
144
145
148
150
152
153
156
157
160
162
163
164
165
169
170
173
175
Product Code
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
1424
1440
1480
1488
1520
1552
1600
1640
1648
1680
1696
1728
1760
1776
1792
1800
1816
1832
1880
1912
1960
2000
2040
2048
2064
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
No. of Teeth
178
180
185
186
190
194
200
205
206
210
212
216
220
222
224
225
227
229
235
239
245
250
255
256
258
Product Code
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
MTS8M
2104
2120
2160
2240
2272
2304
2376
2400
2496
2600
2800
2920
2944
3048
3200
3248
3272
3440
3680
3720
3904
3928
4400
No. of Teeth
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
263
265
270
280
284
288
297
300
312
325
350
365
368
381
400
406
409
430
460
465
488
491
550
MTS14M (Pitch 14 mm)
Product Code
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
1008
1120
1190
1246
1288
1400
1470
1540
1610
1652
No. of Teeth
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
72
80
85
89
92
100
105
110
115
118
Product Code
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
1708
1736
1750
1778
1806
1890
1932
1960
2002
2100
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
No. of Teeth
122
124
125
127
129
135
138
140
143
150
Product Code
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
2198
2240
2310
2380
2450
2506
2590
2660
2800
3150
G2
G2
G2
G2
G2
G2
G2
G2
G2
G2
No. of Teeth
157
160
165
170
175
179
185
190
200
225
Product Code
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
MTS14M
3360
3500
3556
3850
4004
4508
5012
No. of Teeth
G2
G2
G2
G2
G2
G2
G2
240
250
254
275
286
322
358
20
Synchronous Power
Transmission
Characteristics and advantages of High Precision Positioning Timing Belt
●MTS5M
●MTS3M
3.25
1.95
3.41
.25
1.94
.95
R3
1.14
R1
1.91
Ⅰ Synchronous Power
Transmission
● Jumping resistance By introducing extra high modulus cord, belt jumping torque
extremely increase thus it prevent belt jumping against sudden acceleration and
deceleration.
● High damping characteristic With using extra high modulus cord, damping
characteristic is improved. It shorten the time for stopping the belt vibration and
makes better accurate positioning efficency.
● High precision of positioning repeatability Less stretch of the belt provides high
accuracy of positioning repeatability. Belt positioning efficiency and repeatability
extremely increase by using special pulley for minimum backlash.
Belt tooth pitch 5mm
Belt tooth pitch 3mm
Standard Belt Width
Standard Belt Width
Belt Width Code
100 Belt Width
(mm)x10
Belt Width (mm)
Belt Width Code
6
100
10
100
10
150
15
150
15
250
25
MT S3M 450 EX
MEGA
TORQUE
100 MT S5M 600 EX
Belt Type Belt Length
EX
(mm) Specification
Belt Width
(mm)x10
Standard Belt Sizes
MEGA
TORQUE
21
240
270
300
324
330
360
390
420
450
480
510
EX
EX
EX
EX
EX
EX
EX
EX
EX
EX
EX
Belt Type Belt Length
EX
(mm) Specification
Standard Belt Sizes
MTS3M (Pitch 3 mm)
Product Code
MTS3M
MTS3M
MTS3M
MTS3M
MTS3M
MTS3M
MTS3M
MTS3M
MTS3M
MTS3M
MTS3M
Belt Width (mm)
60
MTS5M (Pitch 5 mm)
No. of Teeth
Product Code
No. of Teeth
80
90
100
108
110
120
130
140
150
160
170
MTS3M 540 EX
MTS3M 570 EX
MTS3M 588 EX
MTS3M 600 EX
MTS3M 660 EX
MTS3M 720 EX
MTS3M 780 EX
MTS3M 1035 EX
MTS3M 1521 EX
MTS3M 1788 EX
MTS3M 2538 EX
180
190
196
200
220
240
260
345
507
596
846
Product Code
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
MTS5M
275
300
325
350
400
435
450
500
525
550
575
600
650
EX
EX
EX
EX
EX
EX
EX
EX
EX
EX
EX
EX
EX
No. of Teeth
Product Code
No. of Teeth
55
60
65
70
80
87
90
100
105
110
115
120
130
MTS5M 690 EX
MTS5M 700 EX
MTS5M 720 EX
MTS5M 750 EX
MTS5M 800 EX
MTS5M 850 EX
MTS5M 880 EX
MTS5M 900 EX
MTS5M 950 EX
MTS5M 1000 EX
MTS5M 1780 EX
MTS5M 3835 EX
138
140
144
150
160
170
176
180
190
200
356
767
Synchronous Power
Transmission
● Introducing high modulus but high flexibility carbon cord, this belt
shows high tenacity and high flexibility.
● You may expect this belt to minimize space, weight and noize of
machinery and equipment
by applying narrower belt width
compared to regular timing belt.
● This belt can be applied for the applicability of chain drive system.
Belt
Belt tooth
tooth pitch
pitch 8mm
14mm
Belt tooth pitch 8mm
G8M Standard Belt Width
Belt Width(mm)
12
15
20
Nominal
Width
(mm×10)
G 8 M
Belt Type
9.80
Belt tooth pitch 14mm
G14M Standard Belt Width
21
25
30
36
40
50
60
62
70
80
Belt Width(mm)
Belt Width Code 120 150 200 210 250 300 360 400 500 600 620 700 800
3 6 0
.40
R9
6.10
.40
R93.2
R
3.50
.2
R3
6.10
3.50
9.80
5.60
●G14M
5.60
●G8M
Ⅰ Synchronous Power
Transmission
Dimensions
- Tooth Shape & Product Code -
2 4 0 0
Nominal
Length
(mm)
20
30
37
40
50
60
68
70
80
90
Belt Width Code 200
300
370
400
500
600
680
700
800
900 1000 1150 1250 1300
G X
370
G14 M
210 0
G X
GX Spec.
Nominal
Width
(mm×10)
Belt Type
Nominal
Length
(mm)
GX Spec.
Standard Belt Sizes
No. of Teeth
G8M 640
G8M 720
G8M 800
G8M 896
G8M 960
G8M 1000
G8M 1040
G8M 1120
G8M 1200
G8M 1224
G8M 1280
G8M 1440
G8M 1600
G8M 1760
G8M 1792
80
90
100
112
120
125
130
140
150
153
160
180
200
220
224
115
125
130
Standard Belt Sizes
G8M
Product Code
100
G14M
Product Code
G8M
G8M
G8M
G8M
G8M
G8M
G8M
G8M
G8M
G8M
G8M
G8M
G8M
G8M
G8M
2000
2200
2240
2400
2520
2600
2800
2840
3048
3200
3280
3600
4000
4400
4480
No. of Teeth
Product Code
No. of Teeth
250
275
280
300
315
325
350
355
381
400
410
450
500
550
560
G14M 994
G14M 1120
G14M 1190
G14M 1260
G14M 1400
G14M 1568
G14M 1610
G14M 1750
G14M 1890
G14M 1960
G14M 2100
G14M 2240
G14M 2310
G14M 2380
71
80
85
90
100
112
115
125
135
140
150
160
165
170
Product Code
G14M
G14M
G14M
G14M
G14M
G14M
G14M
G14M
G14M
G14M
G14M
G14M
G14M
2450
2520
2590
2660
2800
3136
3304
3360
3500
3850
3920
4326
4410
No. of Teeth
175
180
185
190
200
224
236
240
250
275
280
309
315
22
Synchronous Power
Transmission
H Series
Round -shape belt teeth enable the distribution of
load stress uniformly over the entire belt tooth.
Since the betl tooth engages with the pulley groove
without any interference, stress concentration at
the root of the belt tooth can be eliminated. This
belt can be used as an alternative for chains and
gears with next advantages:
Belt Pitch Length
Standard Belt Sizes
23
No. of Teeth
424 H8M
480 H8M
536 H8M
560 H8M
592 H8M
600 H8M
624 H8M
632 H8M
640 H8M
656 H8M
680 H8M
720 H8M
760 H8M
776 H8M
800 H8M
840 H8M
856 H8M
880 H8M
896 H8M
912 H8M
920 H8M
936 H8M
960 H8M
968 H8M
1000 H8M
1040 H8M
1056 H8M
1064 H8M
1080 H8M
1120 H8M
1128 H8M
1152 H8M
1160 H8M
1200 H8M
1224 H8M
1248 H8M
53
60
67
70
74
75
78
79
80
82
85
90
95
97
100
105
107
110
112
114
115
117
120
121
125
130
132
133
135
140
141
144
145
150
153
156
10.13
Belt Pitch Length
Standard Belt Sizes
H8M (Pitch 8 mm)
Product Code
6.28
5
.5
R4
3.57
6.20
- Tooth Shape & Product Code -
R2
.7
0
Ⅰ Synchronous Power
Transmission
● High power trasmission capacity
● Long operative life
● Quiet operation
● Cost-efficiency
H14M (Pitch 14 mm)
Product Code
1280
1304
1320
1360
1392
1400
1424
1432
1440
1480
1520
1600
1680
1696
1728
1760
1800
1896
1904
1936
2000
2080
2104
2160
2240
2272
2400
2504
2600
2800
3048
3200
3280
3600
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
H8M
No. of Teeth
Product Code
No. of Teeth
160
163
165
170
174
175
178
179
180
185
190
200
210
212
216
220
225
237
238
242
250
260
263
270
280
284
300
313
325
350
381
400
410
450
784 H14M
826 H14M
924 H14M
966 H14M
1148 H14M
1190 H14M
1344 H14M
1400 H14M
1456 H14M
1512 H14M
1540 H14M
1568 H14M
1610 H14M
1638 H14M
1652 H14M
1680 H14M
56
59
66
69
82
85
96
100
104
108
110
112
115
117
118
120
Product Code
1736
1778
1890
1932
1946
2002
2100
2198
2310
2450
2590
2940
3150
3500
4578
H14M
H14M
H14M
H14M
H14M
H14M
H14M
H14M
H14M
H14M
H14M
H14M
H14M
H14M
H14M
No. of Teeth
124
127
135
138
139
143
150
157
165
175
185
210
225
250
327
Synchronous Power
Transmission
Trapezoidal Tooth Timing Belt
Belt Type, Dimensions & Product Code
Standard Dimensions
MXL
(DMXL)
GB
T80
U
XL
GB・U
(DXL)
GB
L
G・U
(DL)
G
H
(DH)
G
XH
G
XXH
G
T5
(DT5)
U
T10
(DT10)
U
Standard Width
Code Width(mm)
3.2
4.8
6.4
9.5
12.7
3.2
4.8
6.4
9.5
12.7
3.2
4.8
6.4
8.0
9.5
3.2
4.8
6.4
8.0
9.5
025
031
037
050
6.4
7.9
9.5
12.7
050
075
100
150
12.7
19.1
25.4
38.1
075
100
150
200
300
19.1
25.4
38.1
50.8
76.2
200
300
400
500
600
50.8
76.2
101.6
127.0
152.4
200
300
400
500
600
50.8
76.2
101.6
127.0
152.4
05
10
15
20
5.0
10.0
15.0
20.0
15
20
25
30
40
50
15.0
20.0
25.0
30.0
40.0
50.0
10
20
30
10.0
20.0
30.0
10
20
30
10.0
20.0
30.0
5mm
AT5
U
5
1. 2
1.
50° 2.5
10mm
AT10
U
0
2. 5
2.
50° 5.0
Product Code
Minimum Pulley Size*1
Pulley
Diameter(mm)
No. of teeth
6.47
10
Home sewing machine, typewriter, ATM, coin
changer, cash register, printing machine, facsimile,
measurement equipment, ticket machine, camera,
paper feeder, printer, CPU peripherals, card reader,
fish sonar finder, medical measurement equipment,
radio-controlled model, audio player, VTR, editing
equipment
6.47
10
Printer, copier, car antenna, projector
10
Home sewing machine, Iine printer, medical bed,
electrical shaver, auto door, copier, massage
machine, editing machine, ticket machine, mower,
food processor, calculator, fish sonar finder, blood
pump, home meat slicer
12
Vending machine, wiper, packing machine,
quenching machine, Iift, ice crusher, industrial drier,
automated golf cart, computer, copier, plastic lens
polishing machine, food processing machine,
seaweed collector
56.60
14
Small milling machine, mower, power generator,
compressor, scrap chopper, hole finishing machine,
drilling machine, glass bottle making machine, food
processing machines, rope coiler, roll coater, mill
roll, woodworking machinery
127.34
18
Saw mill, cutting machine, cutter, mixer, pump,
welder, centrifuge, drilling machine, oscillating mill,
Iathe, wool loom, paper manufacuring machine,
textile machine
181.92
18
Blower, high pressure pump, change gear, rod mill,
compressor, NC Iathe, vibrator, mixer, abrasive
boring machine
19.10
12
Data writer, facsimile, sewing machine
44.56
14
Packaging machine, card reader, textile machine,
paper manufacturing machine, NC lathe, conveyor
19.10
12
Machine tools, pumps, textile machinery
47.75
15
Construction machines, pumps, papermaking machines, compressors, textile
machinery, sanding machines, machine tools,
roller-table conveyor drives.
125 (D) MXL 6.4
Double Type
Belt Type
No.of Teeth
Applications
Belt Width(mm)
125 T80 6.4
Belt Width(mm)
No.of Teeth
Belt Type
120 (D) XL 037
Double Type
Belt Width
(inch)×100
Belt Type
Belt Length
(inch)×10
16.17
510 (D) L 100
Double Type
Belt Width
(inch)×100
Belt Type
Belt Length
(inch)×10
36.38
510 (D) H 100
Double Type
Belt Width
(inch)×100
Belt Type
Belt Length
(inch)×10
1120 XH 300
Belt Length
(inch)×10
Belt Width
(inch)×100
Belt Type
1200 XXH 300
Belt Length
(inch)×10
Belt Width
(inch)×100
Belt Type
Ⅰ Synchronous Power
Transmission
Belt Type
(D) T5 − 20 − 100
Belt Type
No.of Teeth
Double Type Belt Width(mm)
(D)
T10 − 20 − 100
Belt Type
Double Type
No.of Teeth
Belt Width(mm)
AT5 − 20 − 975
Belt Type
Belt Length(mm)
Belt Width(mm)
AT10 − 20 − 1280
Belt Type
Belt Length(mm)
Belt Width(mm)
●GB : Bare Back Rubber Timing Belt ●G : RubberTiming Belt ●U : Polyurethane Timing Belt
(Note) 1. Maximum transmission power varies depending on belt width and operating speed with the same belt.
The values in above table are for your reference. Please use correct values from relevant design catalog when you design.
2. For G (rubber) type, use heat resistant or oil resistant specification when the belts are used in high temperature (up to 120 ℃) or where oil may contaminate the belts.
24
Synchronous Power
Transmission
green eco® Series
Environmental-friendly rubber timing belts with EPDM
compound rubber use.
● Excellent ozone resistance
● Less dispersion of rubber dust
Ⅰ Synchronous Power
Transmission
Standard Dimensions and Product Code
Belt Type
Standard Dimensions
Product Code
①
MXL
②
③
① 0.08'' (2.032mm)
② 0.6mm
③ 0.51mm
②
③
① 2.0mm
② 0.6mm
③ 0.76mm
①
②
S3M
③
① 3.0mm
② 0.8mm
③ 1.14mm
①
②
S5M
③
25
Belt Type
No. of Teeth
①
S2M
125MXL12.7
① 5.0mm
② 1.5mm
③ 1.91mm
Belt Width (mm)
40S2M160
Belt Type
Belt Width (mm) x10 Nominal Length (mm)
100S3M459
Belt Type
Belt Width (mm) x10 Nominal Length (mm)
250S5M1125
Belt Type
Belt Width (mm) x10 Nominal Length (mm)
Synchronous Power
Transmission
Timing Belt G
This synchronous transmission belt eliminates the problems
of chains and gears.
Extra small pitch type fits well for precision equipment and
IT systems.
●Thin, lightweight and superior flexibility of this belt allows compact design application.
● It enables efficient high speed power transmission
● Low noise operation compared to chain/gear use
● Cost-Efficient
Belt Type
Tooth Pich
Code(Width)
Size
Product
Code
No.of
Belt Pich
Teeth Length(mm)
Product
Code
No.of
Belt Pich
Teeth Length(mm)
Product
Code
No.of
Belt Pich
Teeth Length(mm)
Product
Code
No.of
Belt Pich
Teeth Length(mm)
34 MXL
35 MXL
40 MXL
41 MXL
45 MXL
46 MXL
48 MXL
49 MXL
50 MXL
52 MXL
34
35
40
41
45
46
48
49
50
52
69.
09
71.
12
81.
28
83.
31
91.
44
93.
47
97.
54
99.
57
101.
60
105.
66
112 MXL
114 MXL
115 MXL
118 MXL
120 MXL
121 MXL
122 MXL
123 MXL
125 MXL
126 MXL
112
114
115
118
120
121
122
123
125
126
227.
58
231.
65
233.
68
239.
78
243.
84
245.
87
247.
90
249.
94
254.
00
256.
03
(D)
230 MXL
(D)
232 MXL
(D)
236 MXL
(D)
239 MXL
(D)
240 MXL
(D)
245 MXL
(D)
248 MXL
(D)
250 MXL
(D)
256 MXL
(D)
260 MXL
230
232
236
239
240
245
248
250
256
260
467.
36
471.
42
479.
55
485.
65
487.
68
497.
84
503.
94
508.
00
520.
19
528.
32
(D)438 MXL
(D)448 MXL
(D)453 MXL
(D)464 MXL
(D)475 MXL
(D)478 MXL
(D)487 MXL
(D)498 MXL
(D)500 MXL
503 MXL
438
448
453
464
475
478
487
498
500
503
890.02
910.34
920.50
942.85
965.20
971.30
989.58
1011.94
1016.00
1022.10
53 MXL
54 MXL
55 MXL
56 MXL
57 MXL
59 MXL
60 MXL
61 MXL
63 MXL
65 MXL
53
54
55
56
57
59
60
61
63
65
107.
70
109.
73
111.
76
113.
79
115.
82
119.
89
121.
92
123.
95
128.
02
132.
08
127 MXL
128 MXL
130 MXL
131 MXL
132 MXL
134 MXL
135 MXL
138 MXL
140 MXL
142 MXL
127
128
130
131
132
134
135
138
140
142
258.
06
260.
10
264.
16
266.
19
268.
22
272.
29
274.
32
280.
42
284.
48
288.
54
(D)
262 MXL
(D)
265 MXL
(D)
270 MXL
(D)
273 MXL
(D)
275 MXL
(D)
278 MXL
(D)
280 MXL
(D)
281 MXL
(D)
285 MXL
(D)
288 MXL
262
265
270
273
275
278
280
281
285
288
532.
38
538.
48
548.
64
554.
74
558.
80
564.
90
568.
96
570.
99
579.
12
585.
22
(D)507 MXL
(D)515 MXL
(D)516 MXL
(D)520 MXL
(D)525 MXL
(D)535 MXL
(D)537 MXL
548 MXL
(D)550 MXL
(D)569 MXL
507
515
516
520
525
535
537
548
550
569
1030.22
1046.48
1048.51
1056.64
1066.80
1087.12
1091.18
1113.54
1117.60
1156.21
66 MXL
67 MXL
68 MXL
70 MXL
71 MXL
72 MXL
73 MXL
74 MXL
75 MXL
76 MXL
66
67
68
70
71
72
73
74
75
76
134.
11
136.
14
138.
18
142.
24
144.
27
146.
30
148.
34
150.
37
152.
40
154.
43
144 MXL
(D)145 MXL
(D)146 MXL
(D)147 MXL
(D)148 MXL
(D)150 MXL
(D)152 MXL
(D)154 MXL
(D)155 MXL
(D)156 MXL
144
145
146
147
148
150
152
154
155
156
292.
61
294.
64
296.
67
298.
70
300.
74
304.
80
308.
86
312.
93
314.
96
316.
99
(D)
290 MXL
(D)
295 MXL
(D)
297 MXL
(D)
300 MXL
(D)
305 MXL
(D)
310 MXL
(D)
312 MXL
(D)
315 MXL
(D)
318 MXL
(D)
320 MXL
290
295
297
300
305
310
312
315
318
320
589.
28
599.
44
603.
50
609.
60
619.
76
629.
92
633.
98
640.
08
646.
18
650.
24
(D)591 MXL
(D)650 MXL
(D)705 MXL
(D)772 MXL
1369 MXL
591
650
705
772
1369
1200.91
1320.80
1432.56
1568.70
2781.81
77 MXL
78 MXL
79 MXL
80 MXL
81 MXL
82 MXL
83 MXL
85 MXL
86 MXL
87 MXL
77
78
79
80
81
82
83
85
86
87
156.
46
158.
50
160.
53
162.
56
164.
59
166.
62
168.
66
172.
72
174.
75
176.
78
(D)158 MXL
(D)160 MXL
(D)162 MXL
(D)165 MXL
(D)170 MXL
(D)171 MXL
(D)175 MXL
(D)184 MXL
(D)185 MXL
(D)186 MXL
158
160
162
165
170
171
175
184
185
186
321.
06
325.
12
329.
18
335.
28
345.
44
347.
47
355.
60
373.
89
375.
92
377.
95
(D)
324 MXL
(D)
330 MXL
(D)
332 MXL
(D)
334 MXL
(D)
336 MXL
(D)
337 MXL
(D)
338 MXL
(D)
339 MXL
344 MXL
(D)
347 MXL
324
330
332
334
336
337
338
339
344
347
658.
37
670.
56
674.
62
678.
69
682.
75
684.
78
686.
82
688.
85
699.
01
705.
10
88 MXL
89 MXL
90 MXL
91 MXL
92 MXL
93 MXL
94 MXL
95 MXL
96 MXL
97 MXL
88
89
90
91
92
93
94
95
96
97
178.
82
180.
85
182.
88
184.
91
186.
94
188.
98
191.
01
193.
04
195.
07
197.
10
(D)187 MXL
(D)188 MXL
(D)190 MXL
(D)192 MXL
(D)194 MXL
(D)195 MXL
(D)198 MXL
(D)200 MXL
(D)
203 MXL
(D)
205 MXL
187
188
190
192
194
195
198
200
203
205
379.
98
382.
02
386.
08
390.
14
394.
21
396.
24
402.
34
406.
40
412.
50
416.
56
(D)
348 MXL
(D)
350 MXL
(D)
355 MXL
(D)
359 MXL
(D)
364 MXL
(D)
365 MXL
(D)
367 MXL
(D)
372 MXL
(D)
380 MXL
(D)
386 MXL
348
350
355
359
364
365
367
372
380
386
707.
14
711.
20
721.
36
729.
49
739.
65
741.
68
745.
74
755.
90
772.
16
784.
35
98 MXL
100 MXL
101 MXL
102 MXL
103 MXL
105 MXL
106 MXL
108 MXL
109 MXL
110 MXL
98
100
101
102
103
105
106
108
109
110
199.
14
203.
20
205.
23
207.
26
209.
30
213.
36
215.
39
219.
46
221.
49
223.
52
(D)
210 MXL
(D)
212 MXL
(D)
219 MXL
(D)
220 MXL
(D)
221 MXL
(D)
222 MXL
(D)
224 MXL
(D)
226 MXL
(D)
227 MXL
(D)
228 MXL
210
212
219
220
221
222
224
226
227
228
426.
72
430.
78
445.
01
447.
04
449.
07
451.
10
455.
17
459.
23
461.
26
463.
30
(D)
397 MXL
(D)
400 MXL
405 MXL
(D)
(D)
411 MXL
415 MXL
(D)
419 MXL
(D)
420 MXL
(D)
424 MXL
(D)
435 MXL
(D)
436 MXL
(D)
397
400
405
411
415
419
420
424
435
436
806.
70
812.
80
822.
96
835.
15
843.
28
851.
41
853.
44
861.
57
883.
92
885.
95
Ⅰ Synchronous Power
Transmission
Standard Belt Sizes
This belt is usually made-to-order, however please check with us for stock when you place order.
26
Synchronous Power
Transmission
Timing Belt G
This synchronous transmission belt eliminates the problems
of chains and gears.
Extra small pitch type fits well for precision equipment and
IT systems.
●Thin, lightweight and superior flexibility of this belt allows compact design application.
● It enables efficient high speed power transmission
● Low noise operation compared to chain/gear
● Maintenance-free
● Standard belt can be used in the temperature range between -30°C and
+90°C , and it is also conductive
Ⅰ Synchronous Power
Transmission
Standard Belt Sizes
Belt Type
Tooth Pich
Code(Width)
Size
27
Product
Code
No.of
Belt Pich
Teeth Length(mm)
Product
Code
No.of
Belt Pich
Teeth Length(mm)
60 XL
64 XL
68 XL
70 XL
74 XL
76 XL
78 XL
80 XL
82 XL
84 XL
30
32
34
35
37
38
39
40
41
42
152.
40
162.
56
172.
72
177.
80
187.
96
193.
04
198.
12
203.
20
208.
28
213.
36
(D)
210 XL
(D)
212 XL
(D)
216 XL
(D)
218 XL
(D)
220 XL
(D)
228 XL
(D)
230 XL
(D)
234 XL
(D)
236 XL
(D)
240 XL
105
106
108
109
110
114
115
117
118
120
533.
40
538.
48
548.
64
553.
72
558.
80
579.
12
584.
20
594.
36
599.
44
609.
60
86 XL
88 XL
90 XL
92 XL
94 XL
96 XL
98 XL
100 XL
102 XL
104 XL
43
44
45
46
47
48
49
50
51
52
218.
44
223.
52
228.
60
233.
68
238.
76
243.
84
248.
92
254.
00
259.
08
264.
16
(D)
250 XL
(D)
254 XL
(D)
260 XL
(D)
270 XL
(D)
276 XL
(D)
280 XL
(D)
282 XL
(D)
290 XL
(D)
300 XL
(D)
310 XL
125
127
130
135
138
140
141
145
150
155
635.
00
645.
16
660.
40
685.
80
701.
04
711.
20
716.
28
736.
60
762.
00
787.
40
106 XL
108 XL
110 XL
112 XL
114 XL
116 XL
118 XL
120 XL
122 XL
124 XL
53
54
55
56
57
58
59
60
61
62
269.
24
274.
32
279.
40
284.
48
289.
56
294.
64
299.
72
304.
80
309.
88
314.
96
(D)
314 XL
(D)
320 XL
(D)
330 XL
332 XL
(D)
340 XL
(D)
348 XL
(D)
352 XL
(D)
360 XL
(D)
364 XL
(D)
370 XL
157
160
165
166
170
174
176
180
182
185
797.
56
812.
80
838.
20
843.
28
863.
60
883.
92
894.
08
914.
40
924.
56
939.
80
126 XL
128 XL
130 XL
134 XL
136 XL
138 XL
140 XL
142 XL
144 XL
146 XL
63
64
65
67
68
69
70
71
72
73
320.
04
325.
12
330.
20
340.
36
345.
44
350.
52
355.
60
360.
68
365.
76
370.
84
(D) 376 XL
(D)
380 XL
(D)
384 XL
(D)
388 XL
(D)
390 XL
(D)
396 XL
(D)
414 XL
(D)
424 XL
450 XL
(D)
460 XL
188
190
192
194
195
198
207
212
225
230
955.
04
965.
20
975.
36
985.
52
990.
60
1005.
84
1051.
56
1076.
96
1143.
00
1168.
40
148 XL
(D)
150 XL
(D)
152 XL
(D)
154 XL
(D)
156 XL
(D)
158 XL
(D)
160 XL
(D)
162 XL
(D)
164 XL
(D)
166 XL
74
75
76
77
78
79
80
81
82
83
375.
92
381.
00
386.
08
391.
16
396.
24
401.
32
406.
40
411.
48
416.
56
421.
64
(D)
478 XL
(D)
480 XL
(D)
490 XL
522 XL
532 XL
540 XL
552 XL
564 XL
592 XL
600 XL
239
240
245
261
266
270
276
282
296
300
1214.
12
1219.
20
1244.
60
1325.
88
1351.
28
1371.
60
1402.
08
1432.
56
1503.
68
1524.
00
(D)
168 XL
(D)
170 XL
(D)
172 XL
(D)
174 XL
(D)
176 XL
(D)
178 XL
(D)
180 XL
(D)
182 XL
(D)
184 XL
(D)
186 XL
84
85
86
87
88
89
90
91
92
93
426.
72
431.
80
436.
88
441.
96
447.
04
452.
12
457.
20
462.
28
467.
36
472.
44
616 XL
630 XL
670 XL
690 XL
754 XL
828 XL
860 XL
308
315
335
345
377
414
430
1564.
64
1600.
20
1701.
80
1752.
60
1915.
16
2103.
12
2184.
40
(D)
188 XL
(D)
190 XL
(D)
192 XL
(D)
194 XL
(D)
196 XL
(D)
198 XL
(D)
200 XL
(D)
202 XL
(D)
204 XL
(D)
206 XL
94
95
96
97
98
99
100
101
102
103
477.
52
482.
60
487.
68
492.
76
497.
84
502.
92
508.
00
513.
08
518.
16
523.
24
Product
Code
No.of
Belt Pich
Teeth Length(mm)
109 L
124 L
135 L
150 L
165 L
173 L
180 L
(D)
187 L
(D)
210 L
(D)
217 L
29
33
36
40
44
46
48
50
56
58
276.
23
314.
33
342.
90
381.
00
419.
10
438.
15
457.
20
476.
25
533.
40
552.
45
(D)
225 L
(D)
232 L
(D)
240 L
(D)
255 L
(D)
265 L
(D)
270 L
(D)
277 L
(D)
285 L
(D)
300 L
(D)
315 L
60
62
64
68
71
72
74
76
80
84
571.
50
590.
55
609.
60
647.
70
676.
28
685.
80
704.
85
723.
90
762.
00
800.
10
(D)
320 L
(D)
322 L
(D)
334 L
(D)
337 L
(D)
345 L
(D)
360 L
(D)
367 L
(D)
375 L
(D)
382 L
(D)
390 L
85
86
89
90
92
96
98
100
102
104
809.
63
819.
15
847.
73
857.
25
876.
30
914.
40
933.
45
952.
50
971.
55
990.
60
(D)
394 L
(D)
398 L
(D)
420 L
(D)
427 L
(D)
435 L
(D)
450 L
(D)
454 L
(D)
480 L
(D)
510 L
(D)
525 L
105
106
112
114
116
120
121
128
136
140
1000.
13
1009.
65
1066.
80
1085.
85
1104.
90
1143.
00
1152.
53
1219.
20
1295.
40
1333.
50
(D)
540 L
(D)
548 L
(D)
581 L
(D)
600 L
(D)
630 L
(D)
653 L
(D)
660 L
697 L
731 L
934 L
1174 L
1264 L
144
146
155
160
168
174
176
186
195
249
313
337
1371.
60
1390.
65
1476.
38
1524.
00
1600.
20
1657.
35
1676.
40
1771.
65
1857.
37
2371.
72
2981.
33
3209.
93
Product
Code
225 H
230 H
(D)
240 H
(D)
245 H
(D)
255 H
(D)
270 H
(D)
280 H
(D)
300 H
(D)
310 H
(D)
315 H
(D)
320 H
(D)
330 H
(D)
340 H
(D)
350 H
(D)
360 H
(D)
370 H
(D)
375 H
(D)
390 H
(D)
400 H
(D)
410 H
(D)
420 H
(D)
430 H
(D)
450 H
(D)
465 H
(D)
480 H
(D)
490 H
(D)
510 H
(D)
530 H
(D)
540 H
(D)
560 H
(D)
565 H
(D)
570 H
(D)
580 H
(D)
600 H
(D)
605 H
(D)
625 H
(D)
630 H
(D)
640 H
(D)
650 H
(D)
660 H
(D)
680 H
(D)
700 H
(D)
730 H
(D)
750 H
(D)
770 H
(D)
800 H
(D)
810 H
(D)
840 H
(D)
850 H
(D)
860 H
(D)
880 H
(D)
900 H
(D)
950 H
(D)1000 H
(D)1020 H
(D)1100 H
(D)1120 H
(D)1130 H
(D)1140 H
(D)1150 H
(D)1160 H
(D)1250 H
(D)1285 H
(D)1325 H
(D)1345 H
(D)1350 H
(D)1360 H
(D)1400 H
(D)1700 H
(D)1765 H
No.of
Belt Pich
Teeth Length(mm)
45
46
48
49
51
54
56
60
62
63
64
66
68
70
72
74
75
78
80
82
84
86
90
93
96
98
102
106
108
112
113
114
116
120
121
125
126
128
130
132
136
140
146
150
154
160
162
168
170
172
176
180
190
200
204
220
224
226
228
230
232
250
257
265
269
270
272
280
340
353
571.
50
584.
20
609.
60
622.
30
647.
70
685.
80
711.
20
762.
00
787.
40
800.
10
812.
80
838.
20
863.
60
889.
00
914.
40
939.
80
952.
50
990.
60
1016.
00
1041.
40
1066.
80
1092.
20
1143.
00
1181.
10
1219.
20
1244.
60
1295.
40
1346.
20
1371.
60
1422.
40
1435.
10
1447.
80
1473.
20
1524.
00
1536.
70
1587.
50
1600.
20
1625.
60
1651.
00
1676.
40
1727.
20
1778.
00
1854.
20
1905.
00
1955.
80
2032.
00
2057.
40
2133.
60
2159.
00
2184.
40
2235.
20
2286.
00
2413.
00
2540.
00
2590.
80
2794.
00
2844.
80
2870.
20
2895.
60
2921.
00
2946.
40
3175.
00
3263.
90
3365.
50
3416.
30
3429.
00
3454.
40
3556.
00
4318.
00
4483.
10
Synchronous Power
Transmission
Timing Belt G
Belt Type
Tooth Pich
Code(Width)
Product
Code
No.of
Belt Pich
Teeth Length(mm)
Product
Code
No.of
Belt Pich
Teeth Length(mm)
Ⅰ Synchronous Power
Transmission
Standard Belt Sizes
Size
28
Synchronous Power
Transmission
Timing Belt U
With its high abrasion resistance and lesser rubber dust dispersion,
polyurethane timing belts are suitable for use in places where clean
environments are required.
●
●
●
●
The best for light-duty transmission which requires high precision
Suitable for paper feeding use because it does not contaminate contact subject.
Smooth and quiet operation as it is flexible to fit well in small diameter pulleys.
Made-to-order system enables manufacture of special form orders.
Ⅰ Synchronous Power
Transmission
Standard Belt Sizes
Belt Type
Tooth Pich
Code(Width)
Size
29
Product
Code
No.of
Belt Pich
Teeth Length(mm)
Product
Code
No.of
Belt Pich
Teeth Length(mm)
Product
Code
No.of
Belt Pich
Teeth Length(mm)
Product
Code
No.of
Belt Pich
Teeth Length(mm)
30
35
40
45
46
T80
T80
T80
T80
T80
30
35
40
45
46
60.
96
71.
12
81.
28
91.
44
93.
47
104
105
106
108
110
T80
T80
T80
T80
T80
104
105
106
108
110
211.
33
213.
36
215.
39
219.
46
223.
52
220 T80
221 T80
224 T80
225 T80
228 T80
220
221
224
225
228
447.
04
449.
07
455.
17
457.
20
463.
30
358
360
370
380
390
T80
T80
T80
T80
T80
358
360
370
380
390
727.46
731.52
751.84
772.16
792.48
48
50
52
53
54
T80
T80
T80
T80
T80
48
50
52
53
54
97.
54
101.
60
105.
66
107.
70
109.
73
112
114
115
118
120
T80
T80
T80
T80
T80
112
114
115
118
120
227.
58
231.
65
233.
68
239.
78
243.
84
230
232
235
236
239
T80
T80
T80
T80
T80
230
232
235
236
239
467.
36
471.
42
477.
52
479.
55
485.
65
397
400
403
420
434
T80
T80
T80
T80
T80
397
400
403
420
434
806.70
812.80
818.90
853.44
881.89
55
56
57
59
60
T80
T80
T80
T80
T80
55
56
57
59
60
111.
76
113.
79
115.
82
119.
89
121.
92
121
122
123
124
125
T80
T80
T80
T80
T80
121
122
123
124
125
245.
87
247.
90
249.
94
251.
97
254.
00
240
245
248
249
250
T80
T80
T80
T80
T80
240
245
248
249
250
487.
68
497.
84
503.
94
505.
97
508.
00
473
474
500
515
550
T80
T80
T80
T80
T80
473
474
500
515
550
961.14
963.17
1016.00
1046.48
1117.60
63
65
67
68
70
T80
T80
T80
T80
T80
63
65
67
68
70
128.
02
132.
08
136.
14
138.
18
142.
24
126
130
131
132
135
T80
T80
T80
T80
T80
126
130
131
132
135
256.
03
264.
16
266.
19
268.
22
274.
32
255
256
260
262
265
T80
T80
T80
T80
T80
255
256
260
262
265
518.
16
520.
19
528.
32
532.
38
538.
48
583 T80
916 T80
583
916
1184.66
1861.31
71
72
73
74
75
T80
T80
T80
T80
T80
71
72
73
74
75
144.
27
146.
30
148.
34
150.
37
152.
40
140
142
144
145
148
T80
T80
T80
T80
T80
140
142
144
145
148
284.
48
288.
54
292.
61
294.
64
300.
74
270
275
277
279
280
T80
T80
T80
T80
T80
270
275
277
279
280
548.
64
558.
80
562.
86
566.
93
568.
96
77
78
80
81
82
T80
T80
T80
T80
T80
77
78
80
81
82
156.
46
158.
50
162.
56
164.
59
166.
62
150
155
156
157
160
T80
T80
T80
T80
T80
150
155
156
157
160
304.
80
314.
96
316.
99
319.
02
325.
12
285
288
290
295
296
T80
T80
T80
T80
T80
285
288
290
295
296
579.
12
585.
22
589.
28
599.
44
609.
60
83
85
87
88
89
T80
T80
T80
T80
T80
83
85
87
88
89
168.
66
172.
72
176.
78
178.
82
180.
85
165
170
175
180
184
T80
T80
T80
T80
T80
165
170
175
180
184
335.
28
345.
44
355.
60
365.
76
373.
89
300 T80
304 T80
310 T80
312 T80
315 T80
300
304
310
312
315
601.
47
617.
73
629.
92
633.
98
640.
08
90
91
93
94
95
T80
T80
T80
T80
T80
90
91
93
94
95
182.
88
184.
91
188.
98
191.
01
193.
04
185
190
195
200
205
T80
T80
T80
T80
T80
185
190
195
200
205
375.
92
386.
08
396.
24
406.
40
416.
56
318
320
324
330
336
T80
T80
T80
T80
T80
318
320
324
330
336
646.
18
650.
24
658.
37
670.
56
682.
75
97 T80
98 T80
100 T80
102 T80
103 T80
97
98
100
102
103
197.
10
199.
14
203.
20
207.
26
209.
30
208
210
212
215
219
T80
T80
T80
T80
T80
208
210
212
215
219
422.
66
426.
72
430.
78
436.
88
445.
01
340
341
344
350
355
T80
T80
T80
T80
T80
340
341
344
350
355
690.
88
692.
91
699.
01
711.
20
721.
36
Synchronous Power
Transmission
Timing Belt U
Belt Type
Tooth Pich
Code(Width)
Size
Product
Code
No.of
Belt Pich
Teeth Length(mm)
Product
Code
No.of
Belt Pich
Teeth Length(mm)
Product
Code
Ⅰ Synchronous Power
Transmission
Standard Belt Sizes
No.of
Belt Pich
Teeth Length(mm)
60 XL
64 XL
66 XL
70 XL
76 XL
30
32
33
35
38
152.
40
162.
56
167.
64
177.
80
193.
04
210 XL
212 XL
220 XL
224 XL
230 XL
105
106
110
112
115
533.
40
538.
48
558.
80
568.
96
584.
20
124 L
150 L
165 L
173 L
187 L
33
40
44
46
50
314.
33
381.
00
419.
10
438.
15
476.
25
78 XL
80 XL
84 XL
90 XL
94 XL
39
40
42
45
47
198.
12
203.
20
213.
36
228.
60
238.
76
240 XL
250 XL
254 XL
260 XL
270 XL
120
125
127
130
135
609.
60
635.
00
645.
16
660.
40
685.
80
210 L
225 L
240 L
255 L
270 L
56
60
64
68
72
533.
40
571.
50
609.
60
647.
70
685.
80
100 XL
102 XL
104 XL
106 XL
108 XL
50
51
52
53
54
254.
00
259.
08
264.
16
269.
24
274.
32
290 XL
300 XL
320 XL
330 XL
340 XL
145
150
160
165
170
736.
60
762.
00
812.
80
838.
20
863.
60
285 L
300 L
304 L
322 L
345 L
76
80
81
86
92
723.
90
762.
00
771.
53
819.
15
876.
30
110 XL
114 XL
116 XL
120 XL
124 XL
55
57
58
60
62
279.
40
289.
56
294.
64
304.
80
314.
96
348 XL
352 XL
360 XL
376 XL
384 XL
174
176
180
188
192
883.
92
894.
08
914.
40
955.
04
975.
36
367 L
375 L
390 L
420 L
427 L
98
100
104
112
114
933.
45
952.
50
990.
60
1066.
80
1085.
85
126 XL
128 XL
130 XL
136 XL
140 XL
63
64
65
68
70
320.
04
325.
12
330.
20
345.
44
355.
60
390 XL
396 XL
414 XL
430 XL
460 XL
195
198
207
215
230
990.
60
1005.
84
1051.
56
1092.
20
1168.
40
450 L
480 L
510 L
525 L
540 L
120
128
136
140
144
1143.
00
1219.
20
1295.
40
1333.
50
1371.
60
142 XL
146 XL
148 XL
150 XL
152 XL
71
73
74
75
76
360.
68
370.
84
375.
92
381.
00
386.
08
480 XL
490 XL
512 XL
540 XL
544 XL
240
245
256
270
272
1219.
20
1244.
60
1300.
48
1371.
60
1381.
76
600 L
160
1524.
00
154 XL
160 XL
166 XL
168 XL
170 XL
77
80
83
84
85
391.
16
406.
40
421.
64
426.
72
431.
80
564 XL
630 XL
670 XL
730 XL
842 XL
282
315
335
365
421
1432.
56
1600.
20
1701.
80
1854.
20
2138.
68
176 XL
180 XL
186 XL
190 XL
200 XL
88
90
93
95
100
447.
04
457.
20
472.
44
482.
60
508.
00
33
37
40
43
44
165
185
200
215
220
71
72
73
75
78
355
360
365
375
390
(D)110
112
115
(D)118
(D)120
550
560
575
590
600
(D)170
(D)172
(D)180
(D)188
195
850
860
900
940
975
※
(D)36
37
40
41
44
360
370
400
410
440
(D)80
81
(D) 84
85
88
800
810
840
850
880
114
115
(D)120
(D)121
(D)124
1140
1150
1200
1210
1240
(D)170
175
178
(D)180
(D)188
1700
1750
1780
1800
1880
45
49
50
51
52
225
245
250
255
260
(D) 80
(D) 82
84
85
88
400
410
420
425
440
122
(D)124
125
126
(D)130
610
620
625
630
650
198
200
215
(D)220
(D)228
990
1000
1075
1100
1140
45
50
(D)53
55
56
450
500
530
550
560
89
(D) 90
91
92
94
890
900
910
920
940
(D)125
(D)130
(D)132
(D)135
138
1250
1300
1320
1350
1380
196
216
220
221
225
1960
2160
2200
2210
2250
54
55
56
59
(D)60
270
275
280
295
300
89
(D) 90
91
(D) 92
95
445
450
455
460
475
132
135
138
(D)140
144
660
675
690
700
720
243
276
288
1215
1380
1440
(D)60
61
(D)63
65
(D)66
600
610
630
650
660
95
96
97
(D) 98
(D)
100
950
960
970
980
1000
139
(D)140
(D)142
144
145
1390
1400
1420
1450
61
65
66
68
(D)70
305
325
330
340
350
(D) 96
(D)
100
102
※
(D)
103
105
480
500
510
515
525
145
(D)150
156
(D)160
(D)163
725
750
780
800
815
69
(D)70
(D)72
(D)75
78
690
700
720
750
780
101
105
108
(D)
110
111
1010
1050
1080
1100
1110
146
(D)150
156
(D)160
(D)161
1460
1500
1560
1600
1610
109
545
168
840
30
Ⅰ Synchronous Power
Transmission
Synchronous Power
Transmission
Standard Belt Sizes
Belt Type
AT5
AT10
Tooth Pitch
5.0(mm)
10.0(mm)
Code(Width)
10(10.0mm) 20(20.0mm) 30(30.0mm)
10(10.0mm) 20(20.0mm) 30(30.0mm)
Size
31
!
w
e
N
No.of Teeth
Belt Pitch Length(mm)
No.of Teeth
Belt Pitch Length(mm)
60
68
75
78
84
90
100
109
120
122
132
142
144
150
156
172
195
210
300
300
340
375
390
420
450
500
545
600
610
660
710
720
750
780
860
975
1050
1500
61
66
70
78
80
84
89
92
98
105
108
110
115
120
121
125
128
132
140
148
160
180
186
194
610
660
700
780
800
840
890
920
980
1050
1080
1100
1150
1200
1210
1250
1280
1320
1400
1480
1600
1800
1860
1940
Synchronous Power
Transmission
LONG-SPAN Timing Belt
(Open-End & Endless)
This belt is for long-span linear drives and light-duty
synchronous transmission and transportation.
● Freer design possible as the length can be extended.
Size Range for Open-End Type
x100
6.4
9.5
12.7
19.1
25.4
38.1
025
037
050
075
100
150
67
44
34
−
−
−
129
86
64
−
−
−
−
−
72
47
34
−
−
−
129
86
63
41
Belt Width (inch x100)
Belt Type
Belt Length (m)
Ⅰ Synchronous Power
Transmission
● Rubber Timing Belt
For MXL type, belt width is in mm
4
6
10
15
20
25
30
40
50
60
S2M
89
58
35
−
−
−
−
−
−
−
S3M
−
110
65
43
−
−
−
−
−
−
S5M
−
−
78
50
87
68
−
−
−
−
S8M
−
−
124
82
60
48
55
39
30
24
S14M
−
−
−
−
−
58
48
34
27
−
Belt Length (m)
Belt Type
Belt Width (mm x100)
Size Range for Endless Type
L
12.7
355
20.0
H
19.1
343
20.0
XH
50.8
406
20.0
XXH
50.8
406
20.0
S8M
19.0
342
20.0
S14M
50.0
406
20.0
Belt Width (inch x100)
Belt Type
Belt Length (inch x10)
Belt Length (mm)
Belt Type
Belt Width (mm x10)
● Thermosetting Polyurethane Timing Belt
Size Range for Open-End Type
6.4
9.5
12.7
19.1
025
037
050
075
T80
52
35
−
−
XL
71
48
36
17
L
−
51
38
10
Belt Length (m)
Belt Width (mm)
Belt Type
For XL and L types, belt width is indicated as (inch x100)
5
10
15
20
25
T5
87
44
29
−
−
T10
−
49
32
17
13
4
5
6
10
15
20
25
S2M
99
80
67
−
−
−
−
S3M
−
98
82
50
33
−
−
Belt Length (m)
Belt Width (mm x10)
Belt Type
32
Synchronous Power
Transmission
Timing Pulley
Timing belt power transmission systems work the best when
high-accuracy belts and precisely processed pulleys smoothly
mesh with each other.
● Cutting with hob cutter enables good power transmission.
● MBL accepts your request for material, form and processing method.
● Flange is not sold separately as a single item.
Ⅰ Synchronous Power
Transmission
Standard Pulley Types & Sizes
Belt Type
No. of
Teeth
MXL-Rod shape
Length
(mm)
Pulley
Type
100
100
100
100
100
100
100
100
100
100
10
11
12
14
15
16
18
19
20
21
C
C
C
C
C
B
B
B
B
B
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
100
100
100
100
100
100
100
100
100
100
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
100
100
100
100
100
100
100
100
100
100
22
24
25
26
28
30
32
34
36
38
40
42
44
48
50
B
B
B
B
B
B
A・B
A・B
A・B
A・B
A・B
A・B
A・B
W
W
60
72
W
W
10
12
13
14
15
16
17
18
19
20
5.96
7.25
7.90
8.55
9.19
9.84
10.49
11.13
11.78
12.43
6.47
7.76
8.41
9.06
9.70
10.35
11.00
11.64
12.29
12.94
P10
P12
P13
P14
P15
P16
P17
P18
P19
P20
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
21
22
23
24
25
26
27
28
30
32
13.07
13.72
14.37
15.02
15.66
16.31
16.96
17.60
18.90
20.19
13.58
14.23
14.88
15.52
16.17
16.82
17.46
18.11
19.40
20.70
P21
P22
P23
P24
P25
P26
P27
P28
P30
P32
21.48
22.78
24.07
25.36
26.66
27.95
30.54
31.83
33.13
34.42
21.99
23.29
24.58
25.87
27.17
28.46
31.05
32.34
33.63
34.93
P34
P36
P38
P40
P42
P44
P48
P50
P52
P54
35.71
38.30
40.89
44.77
46.06
51.24
53.82
61.59
64.17
77.11
36.22
38.81
41.40
45.28
46.57
51.74
54.33
62.09
64.68
77.62
100
Material
HighStrength
Aluminum
Alloy
56
60
64
70
72
80
84
96
100
120
Belt Type
Product Code
P56 MXL 100
P60 MXL 100
P64 MXL 100
P70 MXL 100
P72 MXL 100
P80 MXL 100
P84 MXL 100
P96 MXL 100
P100 MXL 100
P120 MXL 100
MXL for Belt Width − 6.4mm
No. of
Teeth
Length
(mm)
20
21
22
23
24
25
26
27
28
30
B
B
B
B
B
B
B
B
B
B
32
36
40
48
60
72
84
96
120
B
B
B
B
B
B
B
B
B
Material
HighStrength
Aluminum
Alloy
OD
(mm)
PD
(mm)
12.43
13.07
13.72
14.37
15.02
15.66
16.31
16.96
17.60
18.90
12.94
13.58
14.23
14.88
15.52
16.17
16.82
17.46
18.11
19.40
20.19
22.78
25.36
30.54
38.30
46.06
53.82
61.59
77.11
20.70
23.29
25.87
31.05
38.81
46.57
54.33
62.09
77.62
Product Code
P20
P21
P22
P23
P24
P25
P26
P27
P28
P30
XL
No. of
Teeth
PD
(mm)
34
36
38
40
42
44
48
50
52
54
33
Belt Type
OD
(mm)
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
6.4
6.4
6.4
6.4
6.4
6.4
6.4
6.4
6.4
6.4
P32 MXL 6.4
P36 MXL 6.4
P40 MXL 6.4
P48 MXL 6.4
P60 MXL 6.4
P72 MXL 6.4
P84 MXL 6.4
P96 MXL 6.4
P120 MXL 6.4
Material
Sintered
Material
Steel
Cast
Metal
OD
(mm)
PD
(mm)
15.66
17.28
18.90
22.13
23.75
25.36
28.60
30.22
31.83
33.45
16.17
17.79
19.40
22.64
24.46
25.87
29.11
30.72
32.34
33.96
10
11
12
14
15
16
18
19
20
21
XL
XL
XL
XL
XL
XL
XL
XL
XL
XL
037
037
037
037
037
037
037
037
037
037
35.07
38.30
39.92
41.53
44.77
48.00
51.24
54.47
57.70
60.94
64.17
67.41
70.64
77.11
80.34
35.57
38.81
40.43
42.04
45.28
48.51
51.74
54.98
58.21
61.45
64.68
67.91
71.15
77.62
80.85
22
24
25
26
28
30
32
34
36
38
40
42
44
48
50
XL
XL
XL
XL
XL
XL
XL
XL
XL
XL
XL
XL
XL
XL
XL
037
037
037
037
037
037
037
037
037
037
037
037
037
037
037
96.51
115.92
97.02
116.43
60 XL 037
72 XL 037
OD
(mm)
PD
(mm)
Belt Type
Product Code
L
No. of
Teeth
Pulley
Type
10
12
14
15
16
A・B
A・B
A・B
A・B
A・B
29.56
35.62
41.68
44.72
47.75
30.32
36.38
42.45
45.48
48.51
10
12
14
15
16
L
L
L
L
L
050
050
050
050
050
12
14
15
16
L
L
L
L
075
075
075
075
14 L 100
15 L 100
16 L 100
17
18
19
20
21
A・B
A・B
A・B
A・B
A・B
50.78
53.81
56.84
59.88
62.91
51.54
54.57
57.61
60.64
63.67
17
18
19
20
21
L
L
L
L
L
050
050
050
050
050
17
18
19
20
21
L
L
L
L
L
075
075
075
075
075
17
18
19
20
21
L
L
L
L
L
100
100
100
100
100
22
24
25
26
28
A・B
A・B
A・B
A・B
A・B
65.94
72.00
75.04
78.07
84.13
66.70
72.77
75.80
78.83
84.89
22
24
25
26
28
L
L
L
L
L
050
050
050
050
050
22
24
25
26
28
L
L
L
L
L
075
075
075
075
075
22
24
25
26
28
L
L
L
L
L
100
100
100
100
100
30
32
34
36
38
A・B
A・B
A・B
A・B
A・B
90.20
96.26
102.32
108.39
114.45
90.96
97.02
103.08
109.15
115.21
30
32
34
36
38
L
L
L
L
L
050
050
050
050
050
30
32
34
36
38
L
L
L
L
L
075
075
075
075
075
30
32
34
36
38
L
L
L
L
L
100
100
100
100
100
40
44
48
50
60
A・B
A・B
W
W
W
120.51
132.64
144.77
150.83
181.15
121.28
133.40
145.53
151.60
181.91
40
44
48
50
60
L
L
L
L
L
050
050
050
050
050
40
44
48
50
60
L
L
L
L
L
075
075
075
075
075
40
44
48
50
60
L
L
L
L
L
100
100
100
100
100
72
W
217.53
218.30
72 L 050
Material
Steel
Cast
Metal
Product Code
72 L 075
72 L 100
Timing Pulley
Pulley Product Code
38 XL 037 B
(Example)
Pulley Type Form
No. of Teeth
Belt Width (inch x 100)
(Note: belt width is in mm for MXL type)
Belt Type
Add “P” in front of the product code for MXL type
(Ex) P26MXL6.4B
Tooth profile for standard pulleys is in-volute shape complying with ISO
standards.
Standard Pulley Types & Sizes
Belt Type
H
No. of
Teeth
Pulley
Type
14
15
16
18
19
Belt Type
Pulley
Type
14H200
15H200
16H200
18H200
19H200
12
14
15
16
18
C
C
C
B
B
20H150
21H150
22H150
24H150
25H150
20H200
21H200
22H200
24H200
25H200
20
22
24
25
26
B
B
B
B
B
26H100
28H100
30H100
32H100
34H100
26H150
28H150
30H150
32H150
34H150
26H200
28H200
30H200
32H200
34H200
28
30
32
36
40
B
B
A・B
A・B
A・B
145.53
161.70
177.87
194.04
202.13
36H100
40H100
44H100
48H100
50H100
36H150
40H150
44H150
48H150
50H150
36H200
40H200
44H200
48H200
50H200
44
48
50
60
W
W
W
W
242.55
291.06
60H100
72H100
60H150
72H150
60H200
72H200
PD
(mm)
A・B
A・B
A・B
A・B
A・B
55.22
59.27
63.31
71.39
75.44
56.60
60.64
64.68
72.77
76.81
14H100
15H100
16H100
18H100
19H100
14H150
15H150
16H150
18H150
19H150
20
21
22
24
25
A・B
A・B
A・B
A・B
A・B
79.48
83.52
87.56
95.65
99.69
80.85
84.89
88.94
97.02
101.06
20H100
21H100
22H100
24H100
25H100
26
28
30
32
34
A・B
A・B
A・B
A・B
A・B
103.73
111.82
119.90
127.99
136.07
105.11
113.19
121.28
129.36
137.45
36
40
44
48
50
A・B
A・B
W
W
W
144.16
160.33
176.50
192.67
200.76
60
72
W
W
241.18
289.69
Material
Steel
Cast
Metal
T5
No. of
Teeth
OD
(mm)
Product Code
Material
Sintered
Material
Steel
Cast
Metal
OD
(mm)
PD
(mm)
Product Code
18.25
21.45
23.05
24.60
27.80
19.10
22.28
23.87
25.46
28.65
PT5-10-12
PT5-10-14
PT5-10-15
PT5-10-16
PT5-10-18
31.00
34.25
37.40
39.00
40.60
31.83
35.01
38.20
39.79
41.38
PT5-10-20
PT5-10-22
PT5-10-24
PT5-10-25
PT5-10-26
43.75
46.95
50.10
56.45
62.85
44.56
47.75
50.93
57.30
63.66
PT5-10-28
PT5-10-30
PT5-10-32
PT5-10-36
PT5-10-40
69.20
75.55
78.75
94.65
70.03
76.39
79.58
95.49
PT5-10-44
PT5-10-48
PT5-10-50
PT5-10-60
Belt Type
T10
No. of
Teeth
Pulley
Type
12
14
15
16
18
OD
(mm)
PD
(mm)
A・B
A・B
A・B
A・B
A・B
36.35
42.70
45.90
49.05
55.45
38.20
44.56
47.75
50.93
57.30
PT10-15-12
PT10-15-14
PT10-15-15
PT10-15-16
PT10-15-18
PT10-25-12
PT10-25-14
PT10-25-15
PT10-25-16
PT10-25-18
20
22
24
25
26
A・B
A・B
A・B
A・B
A・B
61.80
68.15
74.55
77.70
80.90
63.66
70.03
76.39
79.58
82.76
PT10-15-20
PT10-15-22
PT10-15-24
PT10-15-25
PT10-15-26
PT10-25-20
PT10-25-22
PT10-25-24
PT10-25-25
PT10-25-26
28
30
32
36
40
A・B
A・B
A・B
A・B
A・B
87.25
93.65
100.00
112.75
125.45
89.13
95.49
101.86
114.59
127.32
PT10-15-28
PT10-15-30
PT10-15-32
PT10-15-36
PT10-15-40
PT10-25-28
PT10-25-30
PT10-25-32
PT10-25-36
PT10-25-40
44
48
50
60
W
W
W
W
138.20
150.95
157.30
189.10
140.06
152.79
159.15
190.99
PT10-15-44
PT10-15-48
PT10-15-50
PT10-15-60
PT10-25-44
PT10-25-48
PT10-25-50
PT10-25-60
Material
Steel
Cast
Metal
Product Code
34
Ⅱ F rictional Forced Power
Transmission Belt
Classical V-Belt / Red label V-Belt����������������������� P36
Classical V-Belts for DIN 2215/ISO4184
Wrapped Type��������������������������������������������������������� P37
Classical V-Belts for DIN 2215/ISO4184
TRIPLEX® Raw Edge Cogged Type��������������� P38〜40
MAXSTAR WEDGE V-Belt�������������������������������������� P41
MAXSTAR WEDGE V-Belt for RMA / MPTA��������� P42
Narrow V-Belt for DIN7753 / ISO4184������������������ P43
SUPER VS® Belt (Variable Speed Belt)����������������� P44
MAXSTAR WEDGE Bushing Pulley����������������� P45, 46
e-Power® V-Belt������������������������������������������������������ P47
RIBSTAR Belt G (Rubber V-Ribbed Belt)�������������� P48
RIBSTAR Belt U (Polyurethane V-Ribbed Belt)���� P49
RIBSTAR Pulley (V-Ribbed Pulley)������������������������ P50
FLEXSTAR® Belt������������������������������������������������������ P51
SUPER FLEXSTAR® Belt����������������������������������������� P52
FLEXSTAR® Belt J��������������������������������������������������� P53
POLYMAX® Belt������������������������������������������������������� P54
MB Belt�������������������������������������������������������������������� P55
STARROPE®, SUPER STARROPE®������������������������ P56
PRENE V-ROPE, PRENE HEXAGONAL-ROPE����� P56
Flat Belt������������������������������������������������������������������� P57
Frictional Forced Power
Transmission Belt
Classical V-Belt/ Red label V-Belt
This type is most commonly used as a means for power transmission.
Therefore, it is economic and available in the market. Also, it is easily
replaced.
●Our “SET FREE®” system for multiple belt usage is very effective to reduce dimensional differences of each belt.
● Red label V-Belt is a heavy-duty power transmission belt, which has heat,
oil and flex resistance as well as a high antistatic property
A-50
Product Code
Belt Type
A
B
C
D
E
(Note) Above dimensions are nominal values.
Ⅱ Frictional Forced
Power Transmission Belt
Cross-Sectional Dimensions
M
Belt Code (inch)
● Belt code indicates effective pitch length of the belt in inches.
(For M type, length is outer circumference)
Standard Belt Sizes
36
Frictional Forced Power
Transmission Belt
Classical V-Belts for DIN 2215/ISO4184
Wrapped Type
Widely-used power transmission belt.
Cost efficient, readily available, easily changeable
A-40
Product Code
Belt Type
Belt Code (inch)
● Belt code is nomial length in inch
40.0mm
(11/2")
Cross-Sectional Dimensions
32.0mm
(11/4")
13.0mm
(1/2")
Ⅱ Frictional Forced
Power Transmission Belt
10mm
Z(10)
ZX
6mm
40°
A(13)
AX
22.0mm
(7/8")
17.0mm
(21/32")
B(17)
BX
9mm
(11/32")
40°
11mm
(7/16")
14mm
(9/16")
40°
40°
Z(10), ZX
Inside Length Datum Length
Li (mm)
Ld (mm)
Belt Code
Inside Length Datum Length
Li (mm)
Ld (mm)
20
515
537
38.5
975
21
530
552
39.5
1000
40.5
1030
20.5
21.5
22
22.5
23
23.5
24
24.5
25
25.5
26
26.5
27
27.5
28
28.5
29
29.5
30
30.5
31
31.5
32
32.5
33
33.5
34
34.5
35
35.5
36
36.5
37
37.5
38
525
550
560
575
585
600
610
620
630
650
660
670
685
700
710
725
730
750
765
775
790
800
820
825
840
850
865
875
890
900
915
925
940
950
965
547
572
582
597
607
622
632
642
652
672
682
692
707
722
732
747
752
772
787
797
812
822
842
847
862
872
887
897
912
922
937
947
962
972
39
40
41
41.5
1012
1016
1038
1050
42
1060
42.25
1075
42.5
1080
43
1090
43.5
44
45.5
1295
1310
1320
52.5
1330
53
1346
54
1371
55
1400
56
1422
57
1450
58
1475
59
1500
60
1112
1142
1172
1187
1247
1270
52
1102
1225
1250
51.5
1097
1216
49
51
1082
1194
1215
50
1072
1162
47.5
48
1063
1140
1165
47
1052
1127
1150
46
1022
1105
1120
45
997
990
1041
1525
1237
1272
1292
1317
1332
1342
1352
1368
1393
1422
1444
1472
1497
1522
1547
Size range : 18.5" - 93"
987
All dimentions are nominal values.
: Available sizes for raw edge cogged belt ZX
D(32)
40°
Standard Belt Sizes
Belt Code
37
C(22)
CX
E(40)
20mm
(3/4")
40°
25mm
(1")
Frictional Forced Power
Transmission Belt
Classical V-Belts for DIN 2215/ISO4184
TRIPLEX® Raw Edge Cogged Type
Widely-used power transmission belt.
Cost efficient, readily available, easily changeable
AX-40
Product Code
Belt Type
Belt Code (inch)
● Belt code is nomial length in inch
Belt Code
Datum
Length
Ld(mm)
Belt Code
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
508
535
560
585
610
630
660
686
710
730
767
787
813
838
864
889
914
940
965
990
1016
1041
1060
1100
1120
1143
1168
1200
1220
1250
1270
1300
1320
1350
1375
1400
1422
538
565
590
615
640
660
690
716
740
760
797
817
843
868
894
919
944
970
995
1020
1046
1071
1090
1130
1150
1173
1198
1230
1250
1280
1300
1330
1350
1380
1405
1430
1452
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
Inside
Length
Li(mm)
1450
1475
1500
1525
1550
1575
1600
1625
1650
1676
1700
1725
1750
1775
1800
1825
1854
1880
1900
1930
1956
1980
2000
2032
2060
2083
2110
2134
2160
2180
2210
2240
2260
2286
2310
2337
2360
Datum
Length
Ld(mm)
Belt Code
Inside
Length
Li(mm)
Datum
Length
Ld(mm)
1480
1505
1530
1555
1580
1605
1630
1655
1680
1706
1730
1755
1780
1805
1830
1855
1884
1910
1930
1960
1986
2010
2030
2062
2090
2113
2140
2164
2190
2210
2240
2270
2290
2316
2340
2367
2390
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
112
115
116
118
120
122
124
125
128
130
134
135
136
140
144
150
150
158
160
162
2388
2413
2438
2464
2500
2515
2540
2565
2591
2616
2650
2667
2692
2725
2743
2769
2800
2845
2921
2946
3000
3048
3100
3150
3175
3250
3300
3400
3425
3454
3550
3658
3810
3810
4000
4064
4115
2418
2443
2468
2494
2530
2545
2570
2595
2621
2646
2680
2697
2722
2755
2773
2799
2830
2875
2951
2976
3030
3078
3130
3180
3205
3280
3330
3430
3455
3484
3580
3688
3840
3840
4030
4094
4145
Belt Code
Inside
Length
Li(mm)
Datum
Length
Ld(mm)
165
167
170
173
176
180
185
187
190
195
197
200
4200
4250
4318
4394
4470
4572
4700
4750
4825
4950
5000
5080
4230
4280
4348
4424
4500
4602
4730
4780
4855
4980
5030
5110
Ⅱ Frictional Forced
Power Transmission Belt
A(13), AX
Inside
Length
Li(mm)
Size range : 20" - 360"
All dimentions are nominal values.
: Available sizes for raw edge cogged belt AX
B(17), BX
Belt Code
Inside
Length
Li(mm)
Datum
Length
Ld(mm)
Belt Code
20
21
22
23
24
25
26
27
28
29
30
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
510
535
560
585
615
630
660
686
710
735
762
735
762
785
813
838
865
889
915
940
965
991
1016
1040
1060
1090
1120
1150
1175
1200
1215
1250
1275
1300
1320
1350
1372
553
578
603
628
658
673
703
729
753
778
805
778
805
828
856
881
908
932
958
983
1008
1034
1059
1083
1103
1133
1163
1193
1218
1243
1258
1293
1318
1343
1363
1393
1415
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
Inside
Length
Li(mm)
1400
1425
1450
1475
1500
1525
1550
1575
1600
1625
1650
1675
1700
1725
1750
1775
1800
1825
1850
1880
1900
1930
1950
1981
2000
2032
2060
2083
2100
2134
2160
2200
2210
2240
2260
2286
2300
Datum
Length
Ld(mm)
Belt Code
Inside
Length
Li(mm)
Datum
Length
Ld(mm)
Belt Code
1443
1468
1493
1518
1543
1568
1593
1618
1643
1668
1693
1718
1743
1768
1793
1818
1843
1868
1893
1923
1943
1973
1993
2024
2043
2075
2103
2126
2143
2177
2203
2243
2253
2283
2303
2329
2343
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
110
112
113
114
115
116
117
118
120
122
124
125
126
128
130
132
133
134
135
136
2337
2360
2388
2413
2438
2465
2500
2515
2540
2565
2600
2616
2650
2667
2700
2718
2750
2800
2845
2870
2900
2921
2950
2972
3000
3048
3099
3150
3175
3200
3250
3300
3350
3375
3400
3425
3450
2380
2403
2431
2456
2481
2508
2543
2558
2583
2608
2643
2659
2693
2710
2743
2761
2793
2843
2888
2913
2943
2964
2993
3015
3043
3091
3142
3193
3218
3243
3293
3343
3393
3418
3443
3468
3493
138
140
142
144
145
146
148
150
152
154
155
156
158
160
162
164
165
166
169
170
173
175
177
180
185
188
190
192
195
197
200
204
205
210
215
218
220
Inside
Length
Li(mm)
3500
3550
3600
3658
3675
3700
3750
3810
3861
3912
3937
3950
4000
4065
4115
4165
4200
4215
4300
4318
4394
4450
4500
4572
4700
4775
4826
4875
4953
5000
5080
5182
5200
5334
5450
5540
5600
Datum
Length
Ld(mm)
3543
3593
3643
3701
3718
3743
3793
3853
3904
3955
3980
3993
4043
4108
4158
4208
4243
4258
4343
4361
4437
4493
4543
4615
4743
4818
4869
4918
4996
5043
5123
5225
5243
5377
5493
5583
5643
Belt Code
225
228
230
232
236
238
240
245
248
250
255
260
264
268
270
276
280
290
300
310
320
330
340
350
360
370
380
390
400
Inside
Length
Li(mm)
Datum
Length
Ld(mm)
5700
5800
5850
5893
6000
6045
6096
6225
6300
6350
6475
6600
6700
6800
6850
7000
7100
7360
7620
7875
8125
8375
8640
8900
9150
9400
9650
9900
10160
5743
5843
5893
5936
6043
6088
6139
6268
6343
6393
6518
6643
6743
6843
6893
7043
7143
7403
7663
7918
8168
8418
8683
8943
9193
9443
9693
9943
10203
Size range : 20" - 660"
All dimentions are nominal values.
: Available sizes for raw edge cogged belt BX
38
Frictional Forced Power
Transmission Belt
Classical V-Belts for DIN 2215/ISO4184
Ⅱ Frictional Forced
Power Transmission Belt
C(22), CX
Belt Code
Inside
Length
Li(mm)
Datum
Length
Ld(mm)
Belt Code
30
762
814
31
787
839
67
1700
32
813
865
68
1725
33
838
890
69
1750
34
864
916
70
1775
35
889
941
71
1800
36
914
966
72
1829
37
940
992
73
1854
38
950
1002
39
975
1027
40
1000
1052
41
1030
1082
42
1075
1127
43
1090
1142
44
1120
1172
45
1150
1202
46
1175
1227
47
1200
1252
48
1220
1272
49
1250
1302
50
1270
1322
51
1295
1347
52
1320
1372
53
1350
1402
54
1375
1427
55
1400
1452
56
1425
1477
57
1450
1502
58
1475
1527
59
1500
1552
60
1525
1577
61
1550
1602
62
1575
1627
63
1600
1652
64
1625
1677
65
1650
1702
66
1675
1727
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
Inside
Length
Li(mm)
Belt Code
Inside
Length
Li(mm)
Datum
Length
Ld(mm)
Belt Code
Inside
Length
Li(mm)
Datum
Length
Ld(mm)
1752
104
2642
2694
4167
105
2667
162
4115
1777
2719
4166
4218
1802
106
2692
164
270
6858
6910
275
6985
2744
4267
1827
107
2718
168
7037
4319
280
7100
2770
1852
108
2750
170
7152
4318
4370
290
7366
2802
7418
173
4390
4442
300
7600
1881
110
2800
7652
2852
4445
4497
320
8130
8182
2819
175
1906
111
2871
4500
4552
112
330
8380
8432
2845
177
1880
1932
2897
4572
4624
113
340
1952
8636
8688
2870
180
1900
2922
4648
1930
4700
114
350
1982
8900
8952
2896
183
2948
4700
1956
4752
115
360
2008
9144
9196
2921
185
2973
4750
1981
4802
116
370
2033
9400
9452
2950
187
3002
4825
2000
4877
118
380
2052
9650
9702
3000
190
3052
4950
2032
5002
120
400
2084
10160
10212
3050
195
3102
5052
122
415
2112
10540
10592
3100
197
5000
2060
3152
5080
2083
5132
123
434
2135
11000
11052
3125
200
3177
5131
2108
5183
124
473
2160
12000
12052
3150
202
3202
5234
125
492
2187
12500
12552
3175
204
5182
2135
3227
5207
2159
5259
126
512
2211
13000
13052
3200
205
3252
5334
2184
5386
128
550
2236
14000
14052
3250
210
3302
5461
2210
5513
129
590
2262
15000
15052
3270
215
3322
5600
2240
5652
2292
130
3300
220
3352
5691
2313
132
3350
222
5639
2261
3402
5690
2286
5742
2338
134
3400
224
3452
5715
2311
5767
2363
136
3450
225
3502
5791
2337
5843
2389
138
3500
228
3552
5842
2360
5894
2412
140
3550
230
3602
5970
2388
6022
2440
142
3600
235
3652
6045
2413
6097
2465
144
3658
238
3710
6096
2438
6148
2490
146
3700
240
3752
6302
2517
148
3750
246
6250
2465
3802
6300
2500
6352
2552
150
3810
248
3862
6350
2525
6402
2577
152
3861
250
3913
6500
2540
6552
2592
154
3912
256
3964
6553
2560
6605
2612
155
3937
258
3989
6600
2591
6652
2643
158
4000
260
4052
6700
2616
6752
2668
160
4064
264
4116
268
6800
6852
All dimentions are nominal values.
: Available sizes for raw edge cogged belt CX
39
Datum
Length
Ld(mm)
Inside
Length
Li(mm)
Datum
Length
Ld(mm)
Belt Code
Size range : 30" - 660"
Frictional Forced Power
Transmission Belt
Classical V-Belts for DIN 2215/ISO4184
Datum
Length
Ld(mm)
E(40)
Belt Code
100
2540
2615
168
4267
4342
103
265
2616
6725
2691
6800
144
170
3650
4320
3732
4395
104
268
2650
6800
2725
6875
180
172
4575
4370
4657
4445
105
270
2675
6850
2750
6925
185
173
4700
4390
4782
4465
108
275
2750
6985
2825
7060
190
174
4825
4420
4907
4495
110
280
2800
7100
2875
7175
195
175
4950
4450
5032
4525
112
285
2850
7250
2925
7325
200
176
5080
4470
5162
4545
115
290
2925
7375
3000
7450
205
178
5200
4525
5282
4600
118
295
3000
7500
3075
7575
210
180
5300
4570
5382
4645
120
300
3048
7620
3123
7695
220
182
5600
4620
5682
4695
122
310
3100
7875
3175
7950
225
184
5715
4675
5797
4750
124
330
3150
8380
3225
8455
230
185
5850
4700
5932
4775
126
350
3200
8900
3275
8975
235
186
5970
4725
6052
4800
128
370
3250
9400
3325
9475
240
188
6100
4775
6182
4850
130
390
3300
9900
3375
9975
245
190
6225
4825
6307
4900
132
400
3350
10160
3425
10235
250
192
6350
4875
6432
4950
134
420
3400
10670
3475
10745
255
194
6475
4925
6557
5000
135
420
3425
10670
3500
10745
260
195
6600
4950
6682
5025
136
450
3450
11430
3525
11505
265
198
6730
5025
6812
5100
138
470
3500
11950
3575
12025
270
200
6850
5080
6932
5155
140
500
3550
12700
3625
12775
275
205
6985
5200
7067
5275
142
540
3600
13720
3675
13795
280
210
7100
5330
7182
5405
144
550
3658
14000
3733
14075
285
215
7250
5450
7332
5525
146
600
3700
15240
3775
15315
290
217
7375
5500
7457
5575
148
630
3750
16000
3825
16075
295
220
7500
5600
7582
5675
150
660
3810
16760
3885
16835
300
225
7620
5715
7702
5790
152
3860
3935
305
228
7750
5790
7832
5865
154
3900
3975
310
230
7875
5850
7957
5925
155
3925
4000
315
235
8000
5970
8082
6045
13802
4025
236
6000
8207
13720
3950
8125
540
156
320
6075
600
15240
15322
4000
4075
238
8250
8332
158
325
6045
6120
660
16760
16842
4060
4135
240
8380
8462
160
330
6096
6171
162
4115
4190
335
245
8500
6225
6300
164
4165
4240
340
248
8650
6300
6375
165
4200
4275
345
250
8750
6350
6425
166
4225
4300
350
255
8900
6475
6550
167
4250
4325
355
260
9000
6600
6675
360
9150
All dimentions are nominal values.
Belt Code
Inside
Length
Li(mm)
Datum
Length
Ld(mm)
Belt Code
Inside
Length
Li(mm)
Datum
Length
Ld(mm)
Belt Code
Inside
Length
Li(mm)
Datum
Length
Ld(mm)
Belt Code
Inside
Length
Li(mm)
Datum
Length
Ld(mm)
365
9275
9357
370
9400
9482
375
9525
9607
380
9650
9732
385
9775
9857
390
9900
9982
395
10025
10107
400
10160
10242
405
10300
10382
410
10400
10482
415
10550
10632
420
10670
10752
425
10800
10882
430
10925
11007
435
11050
11132
440
11200
11282
445
11300
11382
450
11430
11512
455
11550
11632
460
11700
11782
465
11800
11882
470
11950
12032
475
12050
12132
480
12190
12272
485
12325
12407
490
12500
12582
495
12575
12657
500
12700
12782
Ⅱ Frictional Forced
Power Transmission Belt
D(32)
Inside
Length
Li(mm)
8582
8732
8832
8982
9082
9232
All dimentions are nominal values.
40
Frictional Forced Power
Transmission Belt
MAXSTAR WEDGE V-Belt
With its unique narrow width, this V-Belt has high power
transmission capability.
● Energy-saving and compact design application
● Possible to operate with maximum speed of 40m/sec
● Excellent heat resistance and antistatic property
● Our “set-free” system for multiple belt usage is very effective to reduce dimensional differences of each belt.
● We standardize easy-to-install bussing types as our wedge pulley.
5V- 2000
Product Code
Belt Type
Belt Code = Effective Belt Length (inch) x10
Ⅱ Frictional Forced
Power Transmission Belt
Comparison with Standard V-Belt
Standard Belt Sizes
Product Code
:C
41
Effective Belt
Length (mm)
Belt Pitch
Length (mm)
Product Code
Effective Belt
Length (mm)
Belt Pitch
Length (mm)
Product Code
Effective Belt
Length (mm)
Belt Pitch
Length (mm)
Frictional Forced Power
Transmission Belt
MAXSTAR WEDGE V-Belt for RMA/MPTA
Unique narrow V belt with high power transmission capability
Suitable for energy-saving / compact design and can be used for high-speed
operation up to 40m /second
Product Code
5V-2500
Belt Type
Belt Code = Effective Belt Length (inch) x10
Cross-Sectional Dimensions
3VX
5VX
Belt length
25−95 96−270 25−95 96−270
range(inch)
a
9.9
8.6
16.6
15.7
b
8.7
9.0
13.5
13.7
a
16.0mm
(5/8")
9.5mm
(3/8")
3V
a
8.0mm
(5/16")
3VX
5V
b
8V
5VX
13.5mm
(17/32")
b
Standard Belt Sizes
3V . 3VX
Effective
Belt Code Outside Length
La (mm)
250
265
280
300
315
335
355
375
400
425
450
475
500
530
560
600
630
670
710
750
800
850
900
950
1000
1060
1120
1180
1250
1320
1400
635
673
711
762
800
851
902
953
1016
1080
1143
1207
1270
1346
1422
1524
1600
1702
1803
1905
2032
2159
2286
2413
2540
2692
2845
2997
3175
3353
3556
5V . 5VX
3V
3VX
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Effective
Belt Code Outside Length
La (mm)
500
530
560
600
630
670
710
750
800
850
900
950
1000
1060
1120
1180
1250
1320
1400
1500
1600
1700
1800
1900
2000
2120
2240
2360
2500
2650
2800
3000
3150
3350
3550
1270
1346
1422
1524
1600
1702
1803
1905
2032
2159
2286
2413
2540
2692
2845
2997
3175
3353
3556
3810
4064
4318
4572
4826
5080
5385
5690
5994
6350
6731
7112
7620
8001
8509
9017
23.0mm
(7/8")
Ⅱ Frictional Forced
Power Transmission Belt
Belt Type
25.5mm
(1")
8V
5V
5VX
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Effective
Belt Code Outside Length
La (mm)
1000
2540
1120
2845
1060
1180
1250
1320
1400
1500
1600
1700
1800
1900
2000
2120
2240
2360
2500
2650
2800
3000
3150
3350
3550
3750
2692
2997
3175
3353
3556
3810
4064
4318
4572
4826
5080
5385
5690
5994
6350
6731
7112
7620
8001
8509
9017
9525
4000
10160
4500
11430
4250
4750
5000
5600
6000
10795
12065
12700
14224
15240
8V
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
All dimentions are nominal values.
42
Frictional Forced Power
Transmission Belt
Narrow V-Belt for DIN 7753/ISO4184
Suitable for energy-saving / compact design
Reduces maintenance costs
SPZ-1000
Product Code
Belt Type
Belt Code (mm)
∗ Belt code = belt effective length (mm)
Cross-Sectional Dimensions
9.7mm
SPZ
SPZX
SPA
SPAX
8.0mm
Ⅱ Frictional Forced
Power Transmission Belt
38°
10.0mm
SPB
SPBX
13.0mm
SPC
SPCX
40°
38°
18.0mm
40°
Standard Belt Sizes
SPZ (SPZX)
SPA (SPAX)
Pitch Length Pitch Length Pitch Length Pitch Length
LW (mm)
LW (mm)
LW (mm)
LW (mm)
487
512
562
587
612
630
637
650
655
662
665
670
687
690
710
722
737
750
760
762
772
787
800
812
825
835
837
850
862
875
885
887
900
912
925
937
940
950
962
987
1000
1005
1010
1012
1024
1037
1047
1060
1077
1080
1087
1100
1110
1112
1120
1137
1140
1162
1180
1187
1200
1202
1212
1222
1237
1250
1262
1270
1282
1287
1300
1312
1320
1337
1340
1347
1362
1387
1400
1412
1420
1437
1462
1487
1500
1512
1520
1537
1560
1562
1587
1600
1612
1637
1662
1687
1700
1737
1762
1787
1800
1812
1837
1862
1887
1900
1937
1987
2000
2030
2037
2050
2060
2082
2087
2120
2137
2150
2160
2187
2200
2240
2262
2280
2287
2300
2337
2360
2387
2400
2410
2437
2450
2487
2500
2540
2580
2600
2637
2650
2670
2687
2690
2700
2712
2720
2737
2760
2800
2840
2900
3000
3050
3070
3150
3170
3200
3250
3350
All dimentions are nominal values.
43
22.0mm
16.3mm
12.7mm
3450
3550
3660
3750
4000
4500
SPB (SPBX)
Pitch Length Pitch Length Pitch Length
LW (mm)
LW (mm)
LW (mm)
732
735
742
757
760
782
800
807
832
850
857
860
882
885
900
907
932
950
957
967
982
1000
1007
1032
1057
1060
1082
1090
1107
1120
1132
1157
1180
1182
1200
1207
1210
1232
1235
1250
1257
1272
1282
1295
1300
1307
1320
1332
1357
1367
1382
1385
1400
: Available sizes for raw edge cogged belt SPZX, SPAX, SPBX, SPCX
1407
1410
1425
1432
1457
1482
1485
1500
1507
1532
1557
1582
1600
1607
1632
1657
1682
1700
1707
1732
1757
1782
1785
1800
1807
1832
1837
1857
1882
1900
1907
1932
1957
1982
2000
2032
2057
2082
2100
2120
2132
2157
2182
2200
2207
2232
2240
2260
2282
2300
2307
2330
2332
2360
2373
2382
2407
2410
2432
2482
2500
2532
2550
2568
2582
2600
2607
2632
2650
2682
2732
2773
2782
2800
2832
2847
2850
2882
2900
2932
2962
2982
3000
3032
3082
3132
3150
3182
3282
3350
3382
3482
3500
3550
3650
3750
3870
4000
4120
4250
4300
4500
4600
4750
4865
5000
SPC (SPCX)
Pitch Length Pitch Length Pitch Length
LW (mm)
LW (mm)
LW (mm)
1250
1260
1320
1340
1400
1410
1500
1510
1590
1600
1690
1700
1750
1800
1850
1900
1950
2000
2020
2030
2060
2120
2131
2137
2150
2180
2200
2240
2264
2280
2300
2310
2320
2330
2360
2390
2391
2410
2425
2430
2450
2473
2500
2518
2522
2530
2550
2575
2580
2600
2640
2650
2670
2680
2700
2720
2750
2800
2820
2840
2900
2990
3000
3070
3150
3170
3175
3200
3238
3250
3280
3328
3340
3350
3400
3412
3425
3450
3500
3550
3650
3675
3700
3750
3770
3800
3850
3870
3875
4000
4060
4100
4120
4250
4260
4296
4310
4318
4370
4500
4560
4600
4620
4720
4750
4820
4870
5000
5070
5300
5380
5500
5600
5680
5800
5990
6000
6300
6340
6700
6720
up to
10000
Pitch Length Pitch Length
LW (mm)
LW (mm)
2000
2120
2240
2280
2335
2360
2400
2413
2425
2500
2550
2580
2600
2650
2700
2720
2750
2770
2800
2840
2900
2950
3000
3050
3100
3150
3200
3220
3320
3350
3375
3420
3430
3450
3500
3520
3550
3600
3620
3670
3700
3750
3770
3800
3810
3970
4000
4050
4100
4200
4250
4300
4350
4380
4400
4420
4445
4450
4500
4530
4650
4720
4750
4850
4900
4970
5000
5030
5070
5200
5300
5330
5400
5500
5600
5700
6000
6200
6300
6480
6500
6700
up to
12500
Frictional Forced Power
Transmission Belt
SUPER VS® Belt (Variable Speed Belt)
Changes in speed can be accurately, smoothly and quietly transmitted
from low to high speed.
High precision and transmission efficiency as well as excellent durability.
Almost no elongation. Excellent oil, heat and lateral pressure resistance.
Specially for high performance and high quality transmission systems.
Cross-Sectional Diagram
b
θ
a(mm)
b(mm)
30
37
12
16
22
10
12
16
20
20
10
12
5
6
8
5
6
8
10
12
SUPER VS 16-8-700
θ°
22
22
22
22
22
22
22
22
22
22
Belt Outer Length (mm)
Belt Thickness (mm)
Belt Top Width (mm)
Belt Type
ISO Code
RMA Code
SUPER VS 22-8-700 = 14 22 V 270
Belt Pitch Length (inch×10)
Variable Speed Belt
Pulley Groove Angle (22°)
Belt Top Width (14×1/16 inches)
Belt Type
Belt Top Width (mm)
Belt Outer Length (mm)
Belt Thickness (mm)
Standard Belt Sizes
ISO Code
RMA Code
ISO Code
RMA Code
ISO Code*1
ISO Code*2
ISO Code*3
30-10-668 1922V256
ISO Code
RMA Code
37-12-855
2322V329
22-8-615
1422V235
10-5-450
16-8-600
20-10-1600
30-10-733 1922V282
37-12-995 2322V384
22-8-648
1422V250
10-5-500
16-8-650
20-10-1700
30-10-723 1922V277
37-12-945 2322V364
30-10-773 1922V298
37-12-1030 2322V396
30-10-813 1922V313
37-12-1120 2322V434
30-10-783 1922V302
30-10-813 1922V314
30-10-838 1922V321
37-12-1090 2322V421
37-12-1140 2322V441
37-12-1190 2322V461
30-10-863 1922V332
37-12-1240 2322V481
30-10-943 1922V363
37-12-1345 2322V521
30-10-878 1922V338
30-10-988 1922V381
30-10-998 1922V386
30-10-1043 1922V403
30-10-1078 1922V417
30-10-1098 1922V426
30-10-1143 1922V443
30-10-1173 1922V454
30-10-1188 1922V460
30-10-1248 1922V484
30-10-1353 1922V526
30-10-1398 1922V544
30-10-1553 1922V604
30-10-1618 1922V630
30-10-1663 1922V646
30-10-1708 1922V666
30-10-1758 1922V686
30-10-1813 1922V706
30-10-1848 1922V721
30-10-1863 1922V726
30-10-1928 1922V751
30-10-1938 1922V756
30-10-2068 1922V806
22-8-625
1422V240
22-8-700
1422V270
22-8-755
22-8-780
22-8-855
22-8-880
22-8-930
1422V290
1422V300
1422V330
1422V340
1422V360
37-12-1255 2322V486
22-8-1030 1422V400
37-12-1395 2322V541
22-8-1135 1422V440
37-12-1545 2322V601
22-8-1085 1422V420
22-8-1185 1422V460
37-12-1595 2322V621
22-8-1200 1422V466
37-12-1750 2322V681
22-8-1235 1422V480
37-12-1700 2322V661
37-12-1800 2322V701
37-12-1850 2322V721
37-12-2055 2322V801
37-12-2120 2322V826
37-12-2170 2322V846
37-12-2270 2322V886
22-8-1210 1422V470
22-8-1390 1422V540
22-8-1540 1422V600
22-8-1690 1422V660
22-8-1845 1422V720
22-8-1995 1422V780
37-12-2360 2322V921
12-5-451
7.522V173
12-5-551
7.522V212
12-5-501
12-5-571
16-6-513
16-6-548
16-6-573
16-6-578
16-6-628
7.522V193
7.522V220
1022V196
1022V210
1022V220
1022V223
1022V247
30-10-2168 1922V846
10-5-475
10-5-525
10-5-550
10-5-575
10-5-600
10-5-625
10-5-650
10-5-675
10-5-700
10-5-725
10-5-750
12-6-500
12-6-525
16-8-625
16-8-675
16-8-700
16-8-725
16-8-750
16-8-775
16-8-800
16-8-825
16-8-850
16-8-875
16-8-900
16-8-925
20-10-1650
20-10-1750
20-10-1800
20-10-1850
20-10-1900
20-10-1950
20-10-2000
20-12-750
20-12-800
20-12-850
20-12-900
20-12-950
16-8-950
20-12-1000
12-6-575
16-8-1000
20-12-1100
12-6-625
20-10-800
20-12-1200
20-10-900
20-12-1300
12-6-550
12-6-600
12-6-650
12-6-675
12-6-700
16-8-975
20-10-750
20-10-850
20-10-950
12-6-725
20-10-1000
12-6-775
20-10-1100
12-6-750
12-6-800
20-10-1050
20-10-1150
12-6-825
20-10-1200
12-6-875
20-10-1300
12-6-850
12-6-900
12-6-925
12-6-950
12-6-975
12-6-1000
20-10-1250
20-10-1350
20-10-1400
20-10-1450
20-10-1500
20-10-1550
Ⅱ Frictional Forced
Power Transmission Belt
a
Product Code
20-12-1050
20-12-1150
20-12-1250
20-12-1350
20-12-1400
20-12-1450
20-12-1500
20-12-1550
20-12-1600
20-12-1650
20-12-1700
20-12-1750
20-12-1800
20-12-1850
20-12-1900
20-12-1950
20-12-2000
Note 1) *1, *2, *3 are only in ISO Code.
Note 2) Please contact us for sizes beyond the standard size.
44
Frictional Forced Power
Transmission Belt
MAXSTAR WEDGE Bushing Pulley
For all wedge pulleys, we adopt a “bushing system” for easy
attachment and removal from the shaft with one spanner.
●
●
●
●
Long shaft life as it does not damage the shaft and shaft hole
No need for additional processing of the shaft hole
Easy centering and smooth positional change of rotating body such as the pulley
Possible weight reduction of pulley as small bore width can be applied
450-5V-3-R1
Bushing Pulley Product Code
No. of Grooves
Pulley
Diameter
Bushing Type
Belt Type
Application chart for MB Bushing on MAXSTAR WEDGE Pulley
Belt Type
Belt Type
No.of Grooves
Standard Pulley
Diameter/Diameter
Code(mm)
Belt Type
No.of Grooves
Standard Pulley
Diameter/Diameter
Code(mm)
No.of Grooves
Ⅱ Frictional Forced
Power Transmission Belt
Standard Pulley
Diameter/Diameter
Code(mm)
● How to mount onto the shaft
❶
Place the bushing in the
pulley and loosen bolts by
hand
❷
❸
Attach the bushing pulley
onto the shaft (it should fit
smoothly.)
Fasten tight with tightening
bolts and fitting is completed.
● How to detach from the shaft
45
Mounting bushing pulley is easy
even from the opposite side.
1
2
Fasten bolts evenly
Wear protective gear such as gloves while mounting and removing the
pulley. Also, before starting any work, switch off the power and ensure
that machine is completely stopped.
● Bolt Tightening Torque
❶
❷
❸
Remove tightening bolts
Screw the bolts into the
taps for flange removal
Remove the bushing pulley
from the shaft
Frictional Forced Power
Transmission Belt
Number of Required Belts and Pulley Width
3V・3VX
5V・5VX
8V
Ⅱ Frictional Forced
Power Transmission Belt
MB Bushing Size Table
46
Frictional Forced Power
Transmission Belt
e-Power® V-Belt
This type has enhanced flexibility over standard V-Belts.
Due to this flexibility, it reduces the energy loss from bending
stress and thus is more efficient and energy-saving.
●It saves electricity.
●It is compatible with exisiting pulley designs.
●Compact design application.
●It has longer operating life.
●You can choose from 2 types depending on intended use :
Raw Edge Cogged type and Wrapped Notched type
Wrapped Notched Type
Ⅱ Frictional Forced
Power Transmission Belt
Raw Edge Cogged Type
For the cogged type, to enhance flexibility, wave shape dents
are added on the bottom of the Raw Edge Belt.
For the Notched type, to enhance flexibility, notches are
added across the bottom of the Wrapped V-Belt.
Product Code
A-50
AX-50
Belt Type
Belt Code (inch)
● Belt code indicates belt effective pitch length in inches
Belt Type
Belt Code (inch)
● Belt code indicates belt effective pitch length in inches
Cross-Sectional Dimensions
Above are nominal values.
Standard Belt Sizes
AX
BX
CX
47
Nominal Length
20〜180
25〜270
40〜270
A
B
C
Nominal Length
30〜200
30〜200
45〜200
Frictional Forced Power
Transmission Belt
RIBSTAR Belt G (Rubber V-Ribbed Belt)
This belt combines the properties of the V-Belt’s high power
transmission capability and the Flat Belt flexibility.
●
●
●
●
●
High-efficiency operation at high speed
It can be used on a small diameter pulley because of its enhanced flexibility.
Excellent heat resistance and abrasion resistance
Compact design application.
Little belt vibration.
(Example)
Product Code
320 J 5
For PK type, the metric system is used
5 PK 1500
No. of Ribs
Belt Type
No. of Ribs
Belt Type
Belt Effective
Length (mm)
Belt Effective Length (inch) x10
∗ Effective Length : The effective outer perimeter
Ⅱ Frictional Forced
Power Transmission Belt
Cross-Sectional Diagram
N:No.of Ribs
Standard Sizes for Industrial RIBSTAR Belt
J
Effective
Product Code Length
(mm)
180J
190J
200J
210J
220J
235J
240J
245J
250J
260J
270J
280J
285J
290J
300J
310J
315J
320J
330J
340J
345J
350J
360J
370J
375J
380J
390J
400J
410J
415J
420J
425J
430J
435J
457
483
508
533
559
597
610
622
635
660
686
711
724
737
762
787
800
813
838
864
876
889
914
940
953
965
991
1,016
1,041
1,054
1,067
1,080
1,092
1,105
PK
Effective
Product Code Length
(mm)
440J
445J
450J
460J
470J
480J
490J
500J
510J
520J
525J
530J
540J
550J
560J
580J
590J
600J
610J
620J
630J
650J
660J
665J
690J
700J
730J
750J
760J
770J
780J
820J
890J
900J
1,118
1,130
1,143
1,168
1,194
1,219
1,245
1,270
1,295
1,321
1,334
1,346
1,372
1,397
1,422
1,473
1,499
1,524
1,549
1,575
1,600
1,651
1,675
1,689
1,753
1,778
1,854
1,905
1,930
1,956
1,981
2,083
2,260
2,286
Effective
Product Code Length
(mm)
PK600
PK615
PK630
PK650
PK690
PK710
PK730
PK750
PK775
PK800
PK825
PK850
PK875
PK900
PK925
PK950
PK975
PK1000
PK1030
PK1060
PK1090
PK1120
PK1150
PK1180
PK1220
600
615
630
650
690
710
730
750
775
800
825
850
875
900
925
950
975
1,000
1,030
1,060
1,090
1,120
1,150
1,180
1,220
L
Effective
Product Code Length
(mm)
PK1250
PK1280
PK1320
PK1360
PK1400
PK1450
PK1500
PK1550
PK1600
PK1650
PK1700
PK1750
PK1800
PK1850
PK1900
PK1950
PK2000
PK2120
PK2240
PK2360
PK2500
PK2650
PK2800
PK3000
1,250
1,280
1,320
1,360
1,400
1,450
1,500
1,550
1,600
1,650
1,700
1,750
1,800
1,850
1,900
1,950
2,000
2,120
2,240
2,360
2,500
2,650
2,800
3,000
● Many more sizes are available for PK type.
Please contact us for sizes beyond the
standard size.
Effective
Product Code Length
(mm)
345L
350L
355L
360L
370L
375L
380L
385L
390L
395L
400L
405L
410L
415L
420L
425L
430L
450L
460L
470L
480L
500L
510L
520L
540L
550L
560L
565L
570L
876
889
902
914
940
953
965
978
991
1,003
1,016
1,029
1,041
1,054
1,067
1,080
1,092
1,143
1,168
1,194
1,219
1,270
1,295
1,321
1,372
1,397
1,422
1,435
1,448
Effective
Product Code Length
(mm)
580L
590L
600L
615L
635L
650L
655L
675L
680L
690L
695L
725L
750L
765L
770L
780L
815L
835L
845L
865L
880L
915L
930L
975L
990L
1065L
1120L
1150L
1,473
1,499
1,524
1,562
1,613
1,651
1,664
1,715
1,727
1,753
1,765
1,842
1,905
1,943
1,956
1,981
2,070
2,121
2,146
2,197
2,235
2,324
2,362
2,477
2,515
2,705
2,845
2,921
48
Frictional Forced Power
Transmission Belt
RIBSTAR Belt U (Polyurethane V-Ribbed Belt)
This polyurethane belt combines the features of both V-Belt and Flat Belt.
●Usable on small diameter pulleys (minimum φ 20mm) because of its enhanced flexibility
with nylon cord.
●Excellent flex fatigue resistance.
●Smooth revolution with little vibration.
●It withstands high-speed operation
●Excellent abrasion, oil and ozone resistance
Product Code
(Example)
180 - JBT - 4
No. of Ribs (4 ribs)
Belt Type
Belt Length :
Pitch Length (inch) x 10
Dimensions
Sectional Size
Rib Pitch
Rib Angle
Ⅱ Frictional Forced
Power Transmission Belt
Rib Height
Rib Bottom Thickness
Total Thickness
Belt Width
Standard Belt Sizes for JBT Type
Pitch Length(mm)
Form and Structure of Pulley Groove
Groove Dimensions for RIBSTAR Pulley
W
49
Pitch Length(mm)
Pitch Length(mm)
Pitch Length(mm)
Frictional Forced Power
Transmission Belt
RIBSTAR Pulley
Except for a few sizes, RIBSTAR pulleys adopt the “bushing
system” for easy attachment and removal as well as positioning
of pulley onto the shaft.
Pulley Product Code
(Example)
PK - 160 - 5 - 1210
Groove Form
Diameter Code :
Effective Outer Diameter (mm)
PK
e
rt
rb max
α(°)
f
3.56±0.05
0.35±0.08
0.5
40±0.5
5±0.5
Hg Reference Value
Ⅱ Frictional Forced
Power Transmission Belt
PK
Bore Outer Diameter
Groove Form Belt Type
Effective Outer Diameter
Pitch Diameter
Pulley Groove Dimensions
Bushing
Product
Code
No. of Grooves
Pulley Sizes and Relevant Bushing Product Code
(Outer Diameter)
Bushing
Product Code
Bushing
Product Code
Bushing
Product Code
Bushing
Product Code
Bushing
Product Code
Bushing
Product Code
Up to 30m/sec of pulley rim speed is enabled. Please do not exceed 30m/sec.
50
Frictional Forced Power
Transmission Belt
FLEXSTAR® Belt
Because of its large power transmission capacity,
compact design application and cost reduction
are possible.
● Smooth and quiet operation with little vibration. Withstands operation at a
maximum speed of 60m/sec
● Excellent heat resistance, oil resistance and antistatic properties
● Almost no need for re-tension since the belt doesn’ t stretch much
Ⅱ Frictional Forced
Power Transmission Belt
Dimensions & Product Code
Belt Length(mm)
Belt Type
Belt Width(mm)
Standard Belt Sizes
Applications
51
Frictional Forced Power
Transmission Belt
SUPER FLEXSTAR® Belt
SUPER FLEXSTAR® is a high tension flat belt developed for
press application whereby a belt and a pulley sandwich and
dewater objects.
● High belt tension
● Besides press application, it also suits applications like conveyance.
Product Code
(Example)
50 FW 3150
Belt Length (mm)
Belt Type
Belt Width (mm)
Cross-Sectional Diagram
Top cushion: Chloroprene rubber
Cord protection material : Nylon
Ⅱ Frictional Forced
Power Transmission Belt
a
Adhesion rubber : Chloroprene rubber
b
Cord : Aramid
Cord protection material : Nylon
Bottom cushion : Chloroprene rubber
Belt Types
a
b
Standard Width Belt Thickness
(mm)
(mm)
Standard Size Minimum Pulley
(mm)
Diameter(mm)
Belt Edge
Finishing
Tensile Strength
(kN/cm)
52
Frictional Forced Power
Transmission Belt
FLEXSTAR® Belt J
FLEXSTAR® Belt J is a thin, flexible and seamless high-precision flat belt,
developed specially for conveyance of tickets, plastic cards, paper
money, coins and so on.
●
●
●
●
Good running stability
Reliable conveyance
Excellent abrasion resistance and adaptability
Maintenance-free
Product Code
(Example)
10 - JLB - 500 - 1.0
Belt Width (mm)
Product Lineup
Belt Thickness (mm)
Belt Type
Belt Length (mm)
Ⅱ Frictional Forced
Power Transmission Belt
W
Polished
Polished
eg)
eg)
eg)
53
T
Frictional Forced Power
Transmission Belt
t
s
e
B
!
r
e
l
sel
POLYMAX® Belt
This is a wide-angle belt with an angle of approx. 60° .
●
●
●
●
●
High-speed power transmission with low vibration
Compact design and cost efficient
Maintenance-free and stretch resistance
Excellent weather resistance
MATCHED SET is available for both single and MULTI belts.
Ask for MATCHED SET to improve the performance of multi set system.
Cross-Sectional Sizes & Product Code
Multi-POLYMAX® Belt
Dimensions
Dimensions
Product
Code
Effective Length(mm)
Belt Type
Product
Code
Effective Length(mm)
Belt Type
No.of Ribs
Ⅱ Frictional Forced
Power Transmission Belt
POLYMAX® Belt
Standard Belt Sizes
54
Frictional Forced Power
Transmission Belt
MB Belt (Polyurethane V-Belt)
A small transparent belt for light-duty power transmission
●
●
●
●
With its high flexibility, it can be used with a small diameter pulley.
Excellent abrasion resistance and thus clean operation
Small slippage operation
Excellent oil resistance
Cross-Sectional Dimensions & Product Code
Ⅱ Frictional Forced
Power Transmission Belt
Top Width a (mm)
Belt Length (Outer Perimeter in mm)
Belt Type
Dimensions
Standard Belt Sizes
Belt Length
Form & Dimensions of Pulley Grooves
Min. Width(W) Min. Height(h)
30mm and above
Minimum Pulley Diameter
55
Wo Reference
(min)
θ
R
5.4
4.5
36°
0.8
5.6
5.4
4.5
38°
0.8
5.6
Frictional Forced Power
Transmission Belt
STARROPE®/ SUPER STARROPE®/
PRENE V-ROPE / PRENE HEXAGONAL-ROPE
This is an open-end polyurethane belt.
●
●
●
It is easily applicable in complex power transmission system such as
multiaxial and divertible power transmission.
Thermal weld: Endless belt length possible.
Excellent abrasion and oil resistance
PRENE V-ROPE
PRENE HEXAGONAL ROPE
STARROPE®/ SUPER STARROPE® Dimensions
Belt Code
2φ
3φ
4φ
5φ
6φ
7φ
8φ
9φ
10φ
12φ
15φ
d (mm)
Ⅱ Frictional Forced
Power Transmission Belt
d
Length of 1 Roll(m)
PRENE V-ROPE Cross-Sectional Dimensions
a (mm)
b (mm)
θ(
°)
Lengh of 1 Roll (m)
PRENE HEXAGONAL-ROPE Cross-Sectional Dimensions
a (mm)
b (mm)
θ(
°)
Lengh of 1 Roll (m)
Pulley for STARROPE®/ SUPER STARROPE®
Pulley for PRENE V-ROPE / PRENE HEXAGONAL-ROPE
PRENE V-ROPE
PRENE HEXAGONAL-ROPE
b (mm)
h (mm)
Pulley Dimensions for STARROPE®/ SUPER STARROPE®
Belt Code
2φ
3φ
4φ
5φ
6φ
7φ
8φ
9φ
10φ
12φ
15φ
a (mm)
w (mm)
h (mm)
56
Frictional Forced Power
Transmission Belt
Flat Belt
This is a high-quality flat belt made from premium fabric and
synthetic rubber.
There is very little belt shrinkage.
Excellent flex resistance
Heat, water and oil resistance
● For textile and agricultural machines
Product Lineup
Ⅱ Frictional Forced
Power Transmission Belt
JIS 1st Class
Equivalent
JIS 2nd Class
Equivalent
Round Edge Type
special PORT®
Round Edge Type
PORT®
Cut Edge Type
PIONEER®
Flat Belt
Round Edge Type
HARBOUR®
JIS 3rd Class
Equivalent
Cut Edge Type
ECHO®
Side / core fabric : white
Tape color : light green
Mark color : brown
Side / core fabric : yellow-brown
Tape color : brown
Mark color : orange
Side / core fabric : yellow-brown
Edge adhesive : red
Mark color : brown
Side / core fabric : red-brown
Tape color : green
Mark color : green
Side / core fabric : red-brown
Edge adhesive : green
Mark color : green
Applicable for lifter with its stretch resistant.
For LA, LB, LC types, it is possible to add V rails.
DRY FLEX®
For lifter
Others
Canvas surface
specification
Covered by canvas, this belt has a nonsticky surface. Single sided belt
is manufactured only in cut edge type whereas double sided belt can be
supplied in both cut and round edge type
Standard Sizes for Round Edge Products
No. of Plies
Belt Width
20mm
25mm
30mm
38mm
50mm
63mm
75mm
90mm
100mm
125mm
150mm
175mm
200mm
250mm
300mm
350mm
400mm
500mm
600mm
2P
H・P
H・P
H・P
H・P
H
H
H
H
H
3P
H・P
H・P
H・P
H・P
H・P
H・P
H
H
H
H
H
H
H
H
H
4P
5P
H
H・P
H・P
H・P
H・P
H・P
H
H
P
H・P
P
● H: HARBOUR®
P: PORT®
● Made-to-order for cut edge type (PIONEER®, ECHO®), DRY FLEX® and Canvas surface types.
● A lot for made-to-order items is 100m.
57
6P
H・P
P
7P
8P
P
P
P
P
P
ⅢD
irect Connected
Power Transmission
Chemi-Chan®
(High Performance Miniature Coupling)......... P59
HYPERFLEX® Coupling..................................... P60
TSCHAN® Coupling NOR-MEX®................. P61, 62
TSCHAN® Coupling S........................................ P63
Direct Connected Power
Transmission
“Chemi-Chan®”
(High Performance Miniture Coupling)
“Chemi-Chan®”, high-performance miniature coupling,
launched on the market for high precision rotary
transmission.
●
●
●
●
Excellent vibration absorption
Quiet operation
Accurate positioning and transmission of rotating power
High durability which withstands harsh start and stop of power shaft.
Coupling Product Code (Example)
HAS - 22 - 8x6 - C(or F)
Coupling Code
Coupling Outer Diameter (φ22)
Ⅲ Direct Connected
Power Transmission
Standard Sizes
Peak maximum torque should be twice less than rated torque.
Currently, we use a screw method to mount it onto the shaft.
We use a mass of coupling with a drilled hole as a standard product mass.
Applications
59
C: Clamp Type
F: With Flange (opaque ring)
Duplex Shaft Diameter
(large diameter x small diameter)
Direct Connected Power
Transmission
HYPERFLEX® Coupling (MT . MH)
Two types are available –MT type and MH type
MT type is a compression stress type, which is compact design with
large transmission torque.
MH type is a model uses shearing stress of elastic rubber.
MT Type ● Applicable for all kinds of applications.
● Compact size with large transmission torque.
● Easy-to-install and maintenance-free
● The polyurethane elastic body, which features excellent oil and abrasion
resistance.
MH Type ● High flexibility and excellent shock absorption
● Applicable as a torque limiter
MT - G - 85
Coupling Product Code (Example)
Type
Elastic Body: Rubber
Size
Standard Sizes for MT Type
Ⅲ Direct Connected
Power Transmission
Polyurethane(U)
Standard Sizes for MH Type
Applications
60
Direct Connected Power
Transmission
TSCHAN® Coupling
NOR-MEX®
It consists of a flange and a unique shape elastic body, which withstands
large transmission torque. 20 types available and 301 total combinations.
●
●
●
●
●
Energy-saving since it transmits large torque with small body.
Suitable for machineries with high-speed revolution
Elastic body can be easily attached and removed without moving machinery.
Compact design application, quiet operation and also maintenance-free.
Wide variety of sizes and types.
Coupling Product Code (Example)
Nor - Mex G 148
Size
Model
G Type
Standard Sizes
Regular Max.
Max.
Outer Total
Torque Torque Revolution Diameter Length
Speed
TN
Mmax
mm
mm
rpm
N.m
N.m
Code
Max.
Regular Max.
Torque Torque Revolution Outer
TN
Mmax Speed Diameter
mm
N.m
N.m
rpm
Total
Length
mm
Code
Regular Max.
Torque Torque
TN
Mmax
N.m
N.m
Max.
Revolution Outer Total
Diameter Length
Speed
mm
mm
rpm
Code
Regular Max.
Max.
Torque Torque Revolution Outer Total
TN
Mmax
Speed Diameter Length
mm
mm
N.m
N.m
rpm
Code
Regular Max.
Max.
Outer
Torque Torque Revolution
TN
Mmax Speed Diameter
mm
.
.
rpm
Nm
Nm
Total
Length
mm
Code
Regular Max.
Torque Torque
TN
Mmax
N.m
N.m
Max.
Outer Total
Revolution
Diameter Length
Speed
mm
mm
rpm
Ⅲ Direct Connected
Power Transmission
Code
(LE330-430)
(LE370-480)
(LE415-575)
61
Direct Connected Power
Transmission
TSCHAN® Coupling NOR-MEX® Series
Ⅲ Direct Connected
Power Transmission
Applications
62
Direct Connected Power
Transmission
TSCHAN® Coupling S
●
●
●
●
●
Small size with large torque
Light, compact and easy to install and remove
Suitable for machinery with high revolution speed
Quiet operation and longer operating life
Maintenance-free
Applications
●
●
●
●
●
Crane
Hot run table
NC mill
Machining center
Food manufacturing machinery
Coupling Product Code (Example)
●
●
●
●
●
Industrial sewing machine
Centrifuge
Generator
Conveyor drive
Screw compressor
● Water pump
● Two-way blower
S 200 St - U
Elastic Body: Polyurethane
Flange Material
Model
Size
Standard Sizes for TSCHAN® Coupling S
Outer Total
Diameter Length
mm mm
Outer
Diameter Total
Length
ST ZA mm
Outer
Diameter Total
Length
VS ZA mm
105
105
105
126
126
126
Outer Total
Diameter Length
mm mm
(min−1)
Ⅲ Direct Connected
Power Transmission
Maximum Torque
Mmax(N.m)
Elastic Body
Combination Examples of Standard Types
S Type
ST-TSN
SX Type
ST-TSN
ZA-TSN
SV Type
ST-TSN
ZA-TSN
SZ Type
VS-TSN
ZA-TSN
ZA-TSN
✽ TSCHAN is a registered trademark of TSCHAN Corporation.
®
®
Combination Examples
S-LSt Type
SD-5 Type
SDD-5 Type
Longer one of S type
One side of flange and boss
are detachable by bolts
Both side of flange and boss
are detachable by bolts
BH Type
SDDL-5-BS Type
S type with brake drum
SDD type with brake disc
BHDD Type
For high torque.
Erastic body
replaceable without
moving machine.
63
S-BT Type
For high torque.
One side of flange
and boss is
detachable by bolts
ⅣO
ther Related
Products
SLEEVE ROLL (Polyurethane molded product)���������� P65
STARLOCK® (Shaft Fastener)��������������������������������� P66, 67
Other Related Products
SLEEVE ROLL
(Polyurethane molded product)
It is a new press-in type roller coating and shock-absorption material,
which is formed by jointing soft and hard urethane in two layers.
●It is easily put onto iron cores or rollers by pressing. Also, it has a strong grip.
●It is very economical as it doesn’ t require roll replacement caused by adhesive agents as well as thermal lining onto iron cores or rollers.
●Excellent abrasion and oil resistance compared to plastic and rubber made rolls. Also, it has excellent water and weather resistance.
●Two-layer structure of hard and soft urethane reduces shock and noise during back conveyance. Moreover, a clean conveyance is possible as the roller rust does not contaminate transporting items.
Applications
Product Code
(Example)
SR - 50 - 47
Protection of transported items, surface rust prevention, water
Sleeve Roll
Width
Inner Diameter
washing operation line
Standard Sizes
Hardness( )
Outer Layer+Inner Layer
Ⅳ Other Related
Products
Applicable Shaft Diameter(mm)
(Outer)(Inner)
86°
80°
(Surface Cog Type)
How to put on
Jig
Shaft
65
Sleeve Roll
PVC Pipe
Sleeve Roll
Shaft
Stock Availability
Other Related Products
STARLOCK®
STARLOCK® is a lock system that offers simple yet secure and strong
attachment of shaft and boss without troublesome key groove processing.
Thus, it also saves calculation and control processes required for shrink
and force fit methods.
With this system, shaft and boss are easily put together by high surface
pressure.
●
●
●
●
Absolutely no need for shaft hole and key groove processing
Non-backlash
Any positioning on the shaft is possible
Easy attachment and detachment
STL-20S
STL-21S
STL - 20S - 20 - 47
STL - 21S - 19 - 47
Outer Diameter
Inner Diameter
(Shaft Diameter)
Model Number
Starlock
Performance & Sizes
Outer Diameter
Inner Diameter
(Shaft Diameter)
Model Number
Starlock
Performance & Sizes
Product Code
Ⅳ Other Related
Products
Product Code
Outer ring
Standard Size Range : d = φ5∼φ100
Transmission torque and thrust shown above are maximum values.
Standard Size Range : d = φ20∼φ280
Transmission torque and thrust shown above are maximum values.
66
Other Related Products
STARLOCK®
STL-21F
STL-30R
STL - 21F - 19 - 47
Outer ring
STL - 30R - 20 - 25
Outer Diameter
Inner Diameter
(Shaft Diameter)
Model Number
Starlock
Outer Diameter
Inner Diameter
(Shaft Diameter)
Model Number
Starlock
Inner ring
30F
Performance & Sizes
Product Code
Performance & Sizes
Product Code
STL - 30F - 25 - 30
Outer Diameter
Inner Diameter
(Shaft Diameter)
Model Number
Starlock
Pressurized Flange
Ⅳ Other Related
Products
Product Code
Standard Size Range : d = φ5∼φ100
Transmission torque and thrust shown above are maximum values.
67
Ⅴ T roubleshooting for Power
Transmission Products
For Timing Belt.................................................. P69
For V-Belt........................................................... P70
Troubleshooting for Power
Transmission Products
Failure during machinery operation is a serious matter. To resolve belt failure, determine cause of failure
before replacing with a new belt. This will maximize the capability of the belt and extend its life.
The following is an introduction to belt failure main causes.
Please check the items in this table when failure occurs.
■ 1. For Timing Belt
Occurrence
Abnormal side wear
Cause
● Poor alignment
Adjust the alignment
● Base not adequately fixed
Strengthen the base fixture
● Bending of the pulley flange
Correct flange bending
Abnormal wear at tooth surface ● Overload
where pressure is being exerted ● Overstretched belt
● Overstretched belt
Abnormal wear at contact point
● Defective pulley tooth form
of pulley area
Tooth damage
Measure
Amend the design and use better grade
Adjust the initial tension of the belt
Adjust the initial tension of the belt
Replace using special attention on the R of
the pulley tooth end
● Pulley diameter too small
Change the system design
● 6 teeth or less for T.I.M
Increase T.I.M or change the system design
● Exertion of shock load
Ensure that shock is not exerted on the belt or
increase the belt width
Breaking of tensile body
● Overload
Change the system design
● Drop in elasticity or corrosion of
Check the storage condition and transport
tensile body
● Exertion of shock load
condition of the belt
Ensure that shock is not exerted on the belt or
increase the belt width
● Usage under -30℃
Raise the surrounding temperature
● Pulley diameter too small
Use a bigger diameter pulley
Thermal ageing of rubber/
polyurethane
● Temperature of 80℃ and above at the
Reduce the surrounding temperature
Swelling of the rubber
● Oil contamination
Use polyurethane or oil resistant rubber belt
● Overload
Change the system design
● Overstretched belt
Adjust the initial tension of the belt
● Unsuitable pulley material (too soft)
Add surface treatment or change the material
Crack at the back side
Abnormal wear at pulley tooth
rubber/ polyurethane
of pulley
Ⅴ Troubleshooting
Wear at pulley edge
● Pulley life
Change to a new pulley
● Overstretched belt
Change to new pulley and belt while
(Tensile body can be seen underneath the belt)
Abnormal operation sounds
loosening the tension
● Poor alignment
Adjust the alignment
● Overstretched belt
Adjust the initial tension of the belt
● Overload
Change the system design
● Pulley diameter too small
Change the system design
● Defective pulley tooth form
Ensure that pulley tooth is accordance to
standard dimensions
Belt looks elongated
69
● Short inter-shaft distance
Adjust to the correct inter-shaft distance
● Loosening of the base
Strengthen the base fixture
■ 2. For V-Belt
Occurrence
Slippage
Cause
Measure
● Loose belt tension
Apply appropriate tension
● Overload
Increase belt width or increase the number of belt in use.
● Minimum contact angle
Widen belt width or install an idler pulley of the
appropriate diameter
● Oil or water contamination
Completely remove the oil and water and
prevent further contamination by placing the belt cover
● Load variation/ large shock
While there are design elements to be altered, the
● Use the belt above its transmission capacity
specified type and number of belts should be installed
● Belts not mounted according to the specified
(Depending on the application, please upgrade the belt
number of belts
Early failure
● High heat generated and large flex fatigue
Crack
specification by 1 level)
● Not using the specified belt type
Take counter-measure on heat dissipation or change
(overly small pulley diameter/ bending angle and high
the system design - alter the pulley diameter,
revolution speed)
revolution speed, bending angle
● Tension loss and slippage
Apply appropriate tension
● Tension loss and slippage
Apply appropriate tension
● Use under high temperature
Take counter-measure on heat dissipation
● Continuous sudden stoppage and start-up
Change the system design
● Oil contamination
Fix oil leak and prevent oil contamination
● Pulley diameter too small
Change the system design
● Too strong reverse bending due to backside tension
Install belt cover
● Tension pulley diameter too small
Use a larger diameter tension pulley
● Small bending angle
Decrease the bending angle
● Loose tension and occurrence of slippage
Apply appropriate tension
● Rusty pulley groove or rough finishing of pulley groove
Perform uniform finishing on the pulley groove surface
surface
Wear
(Standard 12S to 6S)
● Tension loss and slippage
Apply appropriate tension
● Inappropriate pulley installation angle
Change alignment to 1/3° and below or
● Defective pulley form
replace the pulley
● Inappropriate pulley groove angle
● Damage on pulley groove
Excessive
vibration
Peeling
● Resonance due to unstable fixture of machine body
Secure the fixtures
● Weak belt tension
Change inter-shaft distance
● Belt lengths not uniform
Use matched set
● Belt used beyond its transmission capacity
Mount belts with the right specification, type, number
● Usage under deformed condition
Change the system design
Ⅴ Troubleshooting
Base crack
● Direct exposure to sunlight
● Usage method resulted in large flex fatigue
● Sudden stop and start during usage
Consider changing the system design for smooth
operation
Noise problem
● Belt tension too loose
Apply appropriate tension
● Overload
Increase belt width or increase the number of belt in use.
● Wrong belt type
Select belt type, specification that matches the operating
conditions
Overturning of belt
● Inappropriate pulley groove angle, installation angle
Change alignment to 1/3° and below
● Pulley groove damage or sticking of belt due to roughly
Replace the pulley
finished surface
● Wear at pulley groove
● Belt lengths not uniform during multiple usage
Use matched set
70
2. CONVEYOR BELTS
Product Lineup ........................................ P72
NEOFLEXSTART® . ............................ P73〜78
FREESPANTM Belt . ............................. P79, 80
Conveyor Belts & Related Products
NEOFLEXSTART®
FREESPAN® Belt
Conveyor Belt
Conveyor
Belts
Polyurethane Screen
ROUND CONVEYOR
PORTFLEX®
Related
Products
Applications & Properties
Product Lineup
Conveyor
Application
Conveyor
Products
Conveyor System
Products
Peripheral
Products
Rubber Conveyor
Belt
• A
brasion resistance, heat resistance, oil resistance,
suitable for inclined conveyance
Plastic Belt
NEOFLEXSTART®
•
•
•
FREESPAN® Belt
• Synchronous conveyance
Suitable for food product conveyance, small diameter pulleys
For logistic terminal, production line
Heat resistant, non-adhesive
ROUND
CONVEYOR
• Circling, diverging conveyance
PORTFLEX®
• Steep angle conveyance
Polyurethane
Screen
• Oscillating separation screen
GRIPTITE®
• Plastic pulley lining material
Application Examples
NEOFLEXSTART
®
Synchronous Transportation Conveyor Belt
FREESPAN® Belt
CONVEYOR BELTS
Light-duty Plastic Conveyor Belt
72
Conveyor Belts
Characteristics & Use
The NEOFLEXSTART® will support automation and
manpower reduction at production and logistics sites.
This product will support a wide range of conveyor
systems.
Each Mitsuboshi “NEOFLEXSTART® U, V, F, P” has its own unique characteristics.
Thus, it is most important to select the correct belt to maximize the belt’s performance.
Safe, clean, stylish
Color
White, green, black
Color
: White, green, dark blue
Color
Brown, black, white, red
Color
Transparent
It works well in many fields, but it is best used
for conveyor lines that require cleanliness.
Using special polyurethane cover with excellent
mildew resistance and water resistance,
It is most suitable for conveying food products.
Also, it has excellent anti-static properties.
It fits in a wide-rang of applications.
Also, after-processing such as adding crosspieces
is easy.
It works well in conveyance of oily items, plywood,
chemical products and various kinds of loads.
Excellent abrasion, ozone and chemical
resistance, as it is covered with high-quality PVC
plastic.
It is usable under various conditions in which
cold / heat resistance and/or non-adhesive
qualities are required.
Excellent heat resistance and non-adhesiveness
as it is coated with Teflon or silicone.
It works well in the places where belt
conveyance is difficult due to high temperature
CONVEYOR BELTS
and characteristics of transporting items such as
adhesive items and chemicals.
The best to be used in conveyance of sticky
items like bread dough
Polyolefin resin provides superior performance
when used in conveyance of sticky items like
bread dough.
Excellent for food conveyance.
73
Oil and Chemical Resistance Table
NS-U
Category
Oil &
Lipids
Disinfectant
Solvent
Bases
Acids
Other
chemicals
Name of Chemicals
UG
UFG
UR
UFR
UHG
BK
Type
NS-V
UPG
0/0
Type
UKG
VG
VN
SS
Type
NS-F
VKU
VKG
FG
FK
NS-P
SG
PN
Animal oil
○
○
○
○
○
△
△
△
○
○
○
○
Vegetable oil
○
○
○
○
○
△
△
△
○
○
○
○
Mineral oil
○
○
○
○
○
×
×
×
○
○
○
○
DOS
△
○
△
○
△
×
×
×
○
○
○
△
Grease
○
○
○
○
○
△
△
△
○
○
○
△
Paraffin oil
○
○
○
○
○
○
○
○
○
○
○
○
Cutting oil
×
○
×
○
○
×
×
×
○
○
×
×
Sodium Hypochlorite 400ppm
○
△
○
○
○
△
△
△
○
○
○
○
Methyl Alcohol (Methanol)
○
○
○
○
△
△
△
△
○
○
○
○
Ethyl Alcohol
○
○
○
○
△
△
△
△
○
○
△
○
Acetone
×
×
×
×
×
×
×
×
○
○
×
△
Gasoline
×
×
×
×
×
×
×
×
○
○
×
△
Toluene (Triol)
×
×
×
×
×
×
×
×
○
○
×
△
Methyl Ethyl Ketone (MEK)
×
×
×
×
×
×
×
×
○
○
×
×
Formaldehyde (Formalin) 37%
×
×
×
×
○
○
△
○
○
○
○
△
Ammonia solution
○
△
○
△
○
○
△
○
○
○
○
○
Sodium Hydroxide (Caustic Soda) 10%
×
×
×
×
△
△
×
△
○
○
○
○
Developing fluid (Hydroquinone)
○
○
○
○
○
○
○
○
○
○
○
○
Nitric acid 5%
×
×
×
×
○
○
×
○
○
○
○
○
Hydrochloric acid 5%
○
×
×
×
○
○
×
○
○
○
○
○
Sulfuric acid 50%
×
×
×
×
△
△
×
△
○
○
×
△
Acetic acid 10%
×
×
×
×
△
△
×
△
○
○
○
○
Sodium Chloride (salt)
○
○
○
○
○
○
○
○
○
○
○
○
Soap
○
○
○
○
○
○
○
○
○
○
○
○
Fertilizer (general)
○
○
○
○
○
○
○
○
○
○
○
○
○ =Applicable △ = Possibility of damage × =Not applicable
Electrostatic Potential
Running Electrostatic Potential ( Measured Values at Mitsuboshi)
∗For antistatic belts such as NS82UG0/2G,
NS-V, as they are processed for static
prevention inside, the surface resistance
values are the same as non-antistatic belts.
Running Electrostatic Potential (V)
(Absolute Value)
NS82UG0/2G* 1000 & below
NS-U All antistatic belts NS41UG0/2BK
50 & below
NS82UG0/2BK
Test conditions:
NS-V
Belt speed
150m/min
Temperature 25±5°C
Humidity
50±10%
NS-F
NS-P
All antistatic belts
Antistatic belt
200〜1000
NS14FG-B
NS15FK-B
50 & below
Non-antistatic belt
20000〜30000
Antistatic belt
1000 & below
Adding Profiles (NEOFLEXSTART®-U,V)
Guides
(For preventing meandering)
Low Profiles
(For preventing loads from falling)
Cleats
(For slopes)
Lugs
(For steep angle conveyance)
CONVEYOR BELTS
The following are the examples of profiles which can be added to the belt.
Hole Punching
We provide hole punching on your requests.
74
Conveyor Belts
Cover
Top Surface
Product Code
Color
Thickness
mm
Underside
Surface Condition
Color
Thickness
mm
Heat & Humidity Resistance/ Prevention of Loose Threads
NS41UG0/2G
Green
Grey
0.2
Flat
NS41UG2/2G
0.2
Green
Green
0.2
Flat
NS82UG0/2G
Green
White
0.2
Flat
NS82UG0/5G
Green
White
0.5
Flat
NS82UG2/2G
0.2
Green
Green
0.2
Flat
NS123UG0/5G
Green
White
0.5
Flat
Antibacterial / Antifungal
NS41UFG0/2W
White
White
0.2
Flat
NS41UFG2/2W
0.2
White
White
0.2
Flat
NS82UFG0/2W
White
White
0.2
Flat
NS82UFG0/5WS
White
White
0.5
Texture pattern (coarse)
NS82UFG0/5W
White
White
0.5
Flat
NS82UF2/2WP
0.2
White
White
0.2
Flat
NS123UFG0/5W
White
White
0.5
Flat
Super Antistatic
NS41UG0/2BK
Black
Grey
0.2
Flat
NS82UG0/2BK
Black
White
0.2
Flat
Slip, Accumulator (Storage)
NS41UG0/0
White
Polyurethane impregnated conductive fabric White
NS41UG0/0G
Green
Polyurethane impregnated conductive fabric Green
NS82UG0/0
White
Polyurethane impregnated sideslip fabric White
NS82UG0/0G
Green
Polyurethane impregnated sideslip fabric Grey
NS41UHG0/2W
White
White
0.2
Flat
NS41UHG0/2G
Green
Grey
0.2
Flat
NS82UHG0/2W
White
White
0.2
Flat
NS82UHG0/2G
Green
White
0.2
Flat
Sideslip
NS82UPG0/0
White
Polyurethane impregnated sideslip fabric White
NS82UPG0/0G
Green
Polyurethane impregnated sideslip fabric Grey
Sloped Conveyance
NS41UKG0/5GT
Green
Grey
0.5
Longitudinal groove
NS82UKG0/8GT
Green
Grey
0.8
Longitudinal groove
Round Conveyor
NS41UFR0/5W
White
White
0.5
Flat
NS41UR0/5G
Green
Grey
0.5
Flat
NS82UFR0/2W
White
White
0.2
Flat
NS82UR0/2G
Green
White
0.2
Flat
(Note): All types of NEOFLEXSTART -U can be used in metal detector machine (except BK)
Surface Condition
No. of
Total
Tension
Thickness
Member
mm
Ply
Polyurethane impregnated conductive low noise fabric
Texture pattern (fine)
Polyurethane impregnated conductive low noise fabric
Polyurethane impregnated conductive low noise fabric
Texture pattern (fine)
Polyurethane impregnated conductive low noise fabric
1
1
2
2
2
3
0.8
1.1
1.4
1.7
1.7
2.5
Polyurethane impregnated conductive low noise fabric
Texture pattern (fine)
Polyurethane impregnated conductive low noise fabric
Polyurethane impregnated conductive low noise fabric
Polyurethane impregnated conductive low noise fabric
Flat
Polyurethane impregnated conductive low noise fabric
1
1
2
2
2
2
3
0.8
1.1
1.4
2
1.7
1.7
2.5
Polyurethane impregnated conductive low noise fabric
Polyurethane impregnated conductive low noise fabric
1
2
0.8
1.4
Polyurethane impregnated conductive low noise fabric
Polyurethane impregnated conductive low noise fabric
Polyurethane impregnated conductive low noise fabric
Polyurethane impregnated conductive low noise fabric
Polyurethane impregnated conductive low noise fabric
Polyurethane impregnated conductive low noise fabric
Polyurethane impregnated conductive low noise fabric
Polyurethane impregnated conductive low noise fabric
1
1
2
2
1
1
2
2
0.6
0.6
1.3
1.3
0.8
0.8
1.4
1.4
Polyurethane impregnated conductive low noise fabric
Polyurethane impregnated conductive low noise fabric
2
2
1.3
1.3
Polyurethane impregnated conductive low noise fabric
Polyurethane impregnated conductive low noise fabric
1
2
1.4
2.3
Polyurethane impregnated conductive fabric
Polyurethane impregnated conductive fabric
Polyurethane impregnated conductive fabric
Polyurethane impregnated conductive fabric
1
1
2
2
1.0
1.0
1.5
1.5
®
Cover
Top Surface
CONVEYOR BELTS
Product Code
Underside
No. of
Total
Tension
Thickness
Member
mm
Ply
Color
Thickne
Surface Condition
Color
Thickness
mm
Surface Condition
NS41VG5/5G
Green
0.5
Flat
Green
0.5
Texture pattern (fine)
1
1.7
NS82VG5/5W
White
0.5
Flat
White
0.5
Texture pattern (fine)
2
2.7
NS82VG5/5G
Green
0.5
Flat
Green
0.5
Texture pattern (fine)
2
2.7
NS183VN0/20W
White
2.0
Flat
White
-
Polyurethane impregnated conductive fabric
3
5.1
NS183VN0/20G
Green
2.0
Flat
White
-
Polyurethane impregnated conductive fabric
3
5.1
NS82VG0/5G
Green
0.5
Flat
White
-
Polyurethane impregnated conductive low noise fabric
2
2.1
NS82VG0/5W
White
0.5
Flat
White
-
Polyurethane impregnated conductive low noise fabric
2
2.1
NS82VG0/20G
Green
2.0
Flat
White
-
Polyurethane impregnated conductive low noise fabric
2
3.6
NS82VKG5/5DB
Dark Blue
0.5
Flat
Dark Blue
0.5
Texture pattern (fine)
2
2.7
NS82VKUG5/8DBT
Dark Blue
0.8
Longitudinal groove
Dark Blue
0.5
Texture pattern (fine)
2
3.1
NS82VKG0/20GD
Green
2.0
Deep groove
White
-
Polyurethane impregnated conductive low noise fabric
2
5.3
NS122VN0/20GSS
Green
2.0
Rough top
Grey
-
Polyurethane impregnated low noise fabric
2
5.5
General Oil Resistance
Low Noise
Sloped Conveyance
75
Characteristics
G=Loose threads prevention,
side rigidity, low noise
F= Antibacterial, antifungal
H=Slippery, nonadhesive
P=Sideslip (palletizer)
K=Sloped conveyance
R=Trough, round conveyor
Weight
kg/m
2
Allowable
Tension
N/mm
Surface Condition
Color
S=Texture pattern (coarse) W=White
T=Longitudinal groove G=Green
BK=Black
P=Two-sided, flat
NEOFLEXSTART Abbreviation
Surface Figure
Permitted Tension (kN/mm)
Color
No. of Tension Member Ply
Top Cover Thickness (1/10mm)
Material (Polyurethane)
Minimum Pulley
Diameter
mm
Knife Edge Radius
Usable Temperature Range
Dry Heat
Temperature ∗3°C
mm
Wet Heat
Temperature°C
Underside Cover Thickness (1/10mm)
Characteristics
Table- Antistatic
Drive Specification
Product Code
Heat & Humidity Resistance/ Prevention of Loose Threads
NS41UG0/2G
○
○
NS41UG2/2G
×
○
NS82UG0/2G
○
○
NS82UG0/5G
○
○
NS82UG2/2G
×
○
NS123UG0/5G
○
○
Antibacterial/ Antifungal
0.7
4
15
R3
0~80
-30~100
NS41UFG0/2W
○
○
1.0
4
30
0~80
NS41UFG2/2W
-30~100
×
×
○
1.5
8
25 (15) ∗1
(R3) ∗2
0~80
NS82UFG0/2W
-30~100
○
○
1.9
8
25 (15) ∗1
0~80
NS82UFG0/5WS
-30~100
×
○
○
1.9
8
50
0~80
NS82UFG0/5W
-30~100
×
○
○
2.0
8
70
0~80
NS82UF2/2WP
-30~100
×
×
○
2.6
12
100
0~80
NS123UFG0/5W
-30~100
×
○
○
Super Antistatic
0.7
4
15
R3
0~70
-30~80
NS41UG0/2BK
○
◎
1.5
8
25 (15) ∗1
(R3) ∗2
0~70
NS82UG0/2BK
-30~80
○
◎
Slip, Accumulator (Storage)
0.4
4
20
R3
0~80
-30~100
NS41UG0/0
○
○
0.4
4
20
R3
0~80
NS41UG0/0G
-30~100
○
○
1.1
8
40 (30) ∗4
0~80
NS82UG0/0
-30~100
×
○
○
1.1
8
40 (30) ∗4
0~80
NS82UG0/0G
-30~100
×
○
○
0.7
4
15
R5
0~80
NS41UHG0/2W
-30~100
○
○
0.7
4
15
R5
0~80
NS41UHG0/2G
-30~100
○
○
1.5
8
25 (15) ∗1
(R3) ∗2
0~80
NS82UHG0/2W
-30~100
○
○
1.5
8
25 (15) ∗1
(R3) ∗2
0~80
NS82UHG0/2G
-30~100
○
○
Sideslip
1.1
8
30
0~80
-30~100
NS82UPG0/0
×
○
○
1.1
8
30
0~80
NS82UPG0/0G
-30~100
×
○
○
Sloped Conveyance
1.0
4
25
0~70
NS41UKG0/5GT
-30~80
×
○
○
2.2
8
50 (25) ∗1
0~70
NS82UKG0/8GT
-30~80
×
○
○
Round Conveyor
1.1
R5
4
20
0~80
NS41UFR0/5W
-30~100
○
○
1.1
R5
4
20
0~80
NS41UR0/5G
-30~100
○
○
1.6
8
30
0~80
NS82UFR0/2W
-30~100
×
○
○
1.6
8
30
0~80
NS82UR0/2G
-30~100
×
○
○
∗1,2: ( ) indicates values when permitted tension is 5N/mm and below. ∗3: For products indicated as Max 100°C, operating temperature is Max 80°C under continuous operation.
∗4: Lightning Endless type
4
4
8
8
8
12
Characteristics
G=Loose threads prevention,
side rigidity, low noise
K=Sloped conveyance
X= Low noise
Weight
15
30
25 (15) ∗1
50
70
100
R3
×
(R3) ∗2
×
×
×
Surface Condition
-30~100
-30~100
-30~100
-30~100
-30~100
-30~100
0~80
0~80
0~80
0~80
0~80
0~80
Color
NEOFLEXSTART Abbreviation
W=White
G=Green
Permitted Tension (kN/mm)
G2=Dark green
No. of Tension Member Ply
GY=Grey
DB=Dark blue
Material (Polyvinylchloride)
R=Texture pattern (fine)
D=Deep groove
SS=Rough top
M=Diamond pattern
Allowable
Tension
N/mm
Minimum Pulley
Diameter
mm
Knife Edge Radius
1.9
4
2.8
Usable Temperature Range
Surface Figure
Color
Top Cover Thickness (1/10mm)
Underside Cover Thickness (1/10mm)
Characteristics
Table- Antistatic
Drive Specification
Product Code
mm
Dry Heat
Temperature °C
Wet Heat
Temperature°C
35
×
-10~80
0~60
×
○
NS41VG5/5G
8
70
×
-10~80
0~60
×
○
NS82VG5/5W
2.8
8
70
×
-10~80
0~60
×
○
NS82VG5/5G
5.8
18
120
×
-10~80
0~60
○
○
NS183VN0/20W
5.8
18
120
×
-10~80
0~60
○
○
kg/m
2
General Oil Resistance
CONVEYOR BELTS
0.7
1.0
1.5
1.9
1.9
2.6
NS183VN0/20G
Low Noise
2.3
8
50
×
-10~80
0~60
○
○
NS82VG0/5G
2.3
8
50
×
-10~80
0~60
○
○
NS82VG0/5W
4.1
8
100
×
-10~80
0~60
○
○
NS82VG0/20G
Sloped Conveyance
2.8
8
75
×
-10~70
0~60
×
○
NS82VKG5/5DB
3.4
8
75
×
-10~70
0~60
×
○
NS82VKUG5/8DBT
4.2
8
80
×
-10~70
0~60
○
○
NS82VKG0/20GD
6.5
12
80
×
-10~70
0~60
○
○
NS122VN0/20GSS
76
Conveyor Belts
Total
Thickness
mm
Weight
NS03FG-P
NS05FG-P
Surface
Kg/m2
Allowable
Tension
N/mm
Color
Condition
0.075
0.3
2
Brown
0.125
0.3
2
Brown
NS06FG-P
0.150
0.3
2
NS10FG-P
0.250
0.5
NS14FG-P
0.350
NS27FG-P
Product Code
Tension Member
Cover Material
Table-Drive
Flat
Glass fiber
Teflon
○
Flat
Glass fiber
Teflon
○
Brown
Flat
Glass fiber
Teflon
○
3
Brown
Flat
Glass fiber
Teflon
○
0.7
6
Brown
Flat
Glass fiber
Teflon
○
0.680
1.1
9
Brown
Flat
Glass fiber
Teflon
○
NS22FG-S
0.550
0.7
8
Brown
Flat
Glass fiber
Teflon
○
NS05FG-B
0.125
0.2
2
Black
Flat
Glass fiber
Teflon
○
NS06FG-B
0.150
0.3
2
Black
Flat
Glass fiber
Teflon
○
NS10FG-B
0.250
0.5
3
Black
Flat
Glass fiber
Teflon
○
NS14FG-B
0.350
0.7
6
Black
Flat
Glass fiber
Teflon
○
NS27FG-B
0.680
1.1
9
Black
Flat
Glass fiber
Teflon
○
NS06FG-TR
0.150
0.3
2
Brown
Flat
Glass fiber
Teflon
○
NS10FG-TR
0.250
0.5
3
Brown
Flat
Glass fiber
Teflon
○
NS19FG-M
0.600
0.5
6
Brown
Mesh
Glass fiber
Teflon
○
NS21FG-M
0.750
0.4
4
Brown
Mesh
Glass fiber
Teflon
○
NS30FG-M
0.920
0.4
3
Brown
Mesh
Glass fiber
Teflon
○
NS15FK
0.350
0.4
6
Brown
Flat
Aramid fiber
Teflon
○
NS15FK-B
0.350
0.3
6
Black
Flat
Aramid fiber
Teflon
○
NS30FK-M
0.700
0.4
8
Brown
Mesh
Aramid fiber
Teflon
○
NS24SG-R
0.610
0.8
8
Red
Flat
Glass fiber
Silicone
×
NS24SG-W
0.610
0.8
8
White
Flat
Glass fiber
Silicone
×
NS42SG-R
1.060
1.5
12
Red
Flat
Glass fiber
Silicone
×
NS42SG-W
1.060
1.5
12
White
Flat
Glass fiber
Silicone
×
Cover
Top Surface
Product Code
Thickness
mm
Surface Condition
NS32PN0/5NM
White transparent
0.5
Diamond pattern
White
-
Polyurethane impregnated conductive low noise fabric
2
1.9
NS11PN3/5NM
White transparent
0.5
Diamond pattern
White transparent
0.3
Flat
1
1.4
Transparent
-
Diamond pattern
Transparent
-
Flat
-
1.5
CONVEYOR BELTS
(Note) NS15PNM is polyolefin sheet and cannot be used as a belt.
Color
Thickness
mm
No. of
Total
Tension
Thickness
Member Ply
mm
Color
NS15PNM
77
Underside
Surface Condition
Characteristics
FG=*Teflon/ glass fiber
FK=*Teflon/ aramid fiber
SG= Silicone/ glass fiber
(Cover material/ tension member material)
* is registered trademarks of Dupont
Surface Condition
Color
Usable Temperature Range
Dry Heat
Wet Heat
Temperature °C Temperature °C
Minimum
Pulley
Diameter
mm
Knife Edge
Radius
mm
Belt Type
NEOFLEXSTART Abbreviation
S=Standard Type (Standard specification)
W=White
P=Premium Type (Flat and smooth specification) R=Red
M=Mesh Type (Standard specification)
B=Black
TR=Tear Resistant Type
Material
Belt Thickness (shown value x 25.4/1000mm)
Maximum
Antistatic Manufacturable
Specification
Width
mm
Specification, Category
Product code
-150~270
0~80
70
×
×
1000
Premium series
NS03FG-P
-150~270
0~80
70
×
×
1500
Premium series
NS05FG-P
-150~270
0~80
70
×
×
1500
Premium series
NS06FG-P
-150~270
0~80
70
×
×
2000
Premium series
NS10FG-P
-150~270
0~80
70
×
×
1500
Premium series
NS14FG-P
-150~270
0~80
70
×
×
2300
Premium series
NS27FG-P
-150~270
0~80
70
×
×
1500
Standard series
NS22FG-S
-150~270
0~80
70
×
○
1500
Antistatic type
NS05FG-B
-150~270
0~80
70
×
○
1500
Antistatic type
NS06FG-B
-150~270
0~80
70
×
○
2000
Antistatic type
NS10FG-B
-150~270
0~80
70
×
○
1500
Antistatic type
NS14FG-B
-150~270
0~80
70
×
○
2600
Antistatic type
NS27FG-B
-150~270
0~80
70
×
×
1000
Tear resistance
NS06FG-TR
-150~270
0~80
70
×
×
1000
Tear resistance
NS10FG-TR
-150~270
0~80
100
×
×
1500
1mm mesh
NS19FG-M
-150~270
0~80
100
×
×
1500
2mm mesh
NS21FG-M
-150~270
0~80
100
×
×
2500
4mm mesh
NS30FG-M
-150~180
0~100
70∗
×
○
2000
Kevlar core
NS15FK
-150~180
0~100
70∗
×
×
1500
Aramid fiber core Antistatic type
NS15FK-B
-150~180
0~100
30
×
×
2000
Aramid fiber core 4mm mesh
NS30FK-M
-70~150
0~80
70
×
×
950
Silicone series
NS24SG-R
-70~150
0~80
70
×
×
950
Silicone series
NS24SG-W
-70~150
0~80
70
×
×
950
Silicone series
NS42SG-R
-70~150
0~80
70
×
×
950
Silicone series
NS42SG-W
∗ φ30 can be used when permitted tension is 1 N/mm and below (except inter-open endless type).
Surface Condition
M=Diamond pattern
Color
N=Transparent
NEOFLEXSTART Abbreviation
Surface Figure
Permitted Tension (N/mm)
Color
No. of Tension Member Ply
Top Cover Thickness (1/10mm)
Material (Polyolefin)
Weight
Allowable
Tension N/
mm
Minimum Pulley
Diameter
mm
Knife Edge
Radius
mm
1.7
3
40
1.0
1
40
1.0
-
-
kg/m
2
Operating Temperature Range
Underside Cover Thickness (1/10mm)
TableDrive
Antistatic
Specification
0~60
○
○
NS32PN0/5NM
0~50
×
-
×
-
NS11PN3/5NM
Dry Heat
Temperature °C
Wet Heat
Temperature °C
×
-10~60
×
-
-10~50
-10~50
0~50
Product Code
NS15PNM
CONVEYOR BELTS
Characteristics
PN=Polyolefin
78
Conveyor Belts
FREESPANTM Belt
FREESPANTM Belt is polyurethane timing belt consists of
thermoplastic polyurethane and steel cords.
This belt is suitable for synchronous transportation and
power transmission requiring accurate positioning.
The tension members are parallel to esch other to ensure
a suitable synchronouse drive. Polyurethane aslo good
physical properties and good chemical resistance.
Belt temperature range is from -30℃ to 80℃ .
Belt type, Dementions & Product code
Trapezoidal Tooth Profile
Standard color : White
Polyurethane
: Thermoplastic Polyurethane Shore A 92
Standard Cords : S and Z zincked steel cord
Tooth
profile
Thickness
(mm)
1.2
2.2
T5
2.2
4.5
2.5
4.5
Width(mm)
2
shafts
Ω
layout
100m
8
10
16
25
32
50
75
100
12
18
○
○
○
100m
10
16
25
32
50
75
100
14
20
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
1.2
2.7
10.0
AT5
2.7
4.5
2.5
4.5
3.60
L
9.525
79
2.29
4.36
H
12.70
3.6
1.90
CONVEYOR BELTS
10.0
100m
15
25
100m
10
16
25
32
50
75
100
150
15
25
14
20
4.36
0.37inch (9.53mm)
0.50inch (12.7mm)
0.75inch (19.1mm)
3937inch 1.00inch (25.4mm)
(100m)
1.50inch (38.1mm)
2.00inch (50.8mm)
3.00inch (76.1mm)
4.00inch (101.6mm)
0.50 inch (12.7mm)
0.75 inch (19.1mm)
1.00 inch (25.4mm)
3937inch 1.50 inch (38.1mm)
(100m) 2.00 inch (50.8mm)
3.00 inch (76.1mm)
4.00 inch (101.6mm)
6.00 inch (152.4mm)
Jointed
Fabric
Cleats
belt
Type
25 T5−100000−***−**
8
10
16
25
32
50
75
100
150
5.0
AT10
Belt Options
Product Code
Roll
Length
5.0
T10
Minimum
Pulley teeth
Standard
Standard Dimensions
Belt
Width
(mm)
Length(mm)
Tooth profile
ML:Open end
MJ:Jointed
FT :Fabric Tooth Side
FB :Fabric Back Side
FTB:Fabric Tooth and Back side
050 L−39370−***−**
Length
(inch×10)
ML:Open end
MJ:Jointed
Tooth profile
Belt Width
(inch×100)
14
20
FT :Fabric Tooth Side
FB :Fabric Back Side
FTB:Fabric Tooth and Back side
FREESPANTM Belt
Belt type, Dementions & Product code
Round Tooth Profile
Standard color : White
Polyurethane
: Thermoplastic Polyurethane Shore A 92
Standard Cords : S and Z zincked steel cord
Standard Dimensions
2.1
HTD5M
Thickness
(mm)
3.6
Tooth
profile
3.6
Standard
Minimum
Pulley teeth
Roll
Length
Width(mm)
2
shafts
Ω
layout
100m
10
15
25
50
75
100
150
14
20
100m
10
15
20
30
50
85
100
150
20
25
40
55
85
100
115
28
3.4
HTD8M
5.6
5.0
5.6
6.0
HTD14M
10.0
8.0
10.0
50m
14.0
Belt Options
Product Code
Jointed
Fabric
Cleats
belt
Type
○
○
○
○
○
○
○
○
○
25 HTD5M−100000−***−**
30
Belt
Width
(mm)
Length(mm)
Tooth profile
ML:Open end
MJ:Jointed
FT :Fabric Tooth Side
FB :Fabric Back Side
FTB:Fabric Tooth and Back side
28
Profile (Cleats)
Freespan belt can be welded variously shaped Cleats on the Belt.
Standard Rectangle Cleats
Standard color : White
Polyurethane
: Thermoplastic Polyurethane Shore A 92
t
P
H
Thickness (t)
2mm ~ 10mm ( ± 0.5mm)
Height (H)
20mm ~ 50mm ( ± 0.5mm)
Tolerance of the positioning
± 0.5mm
≦ 250mm
± 0.5mm
Cleats Pitch
250mm< ≦ 500mm
± 1.0mm
Tolerance (P)
500mm<
± 2.0mm
Special Cleats
CONVEYOR BELTS
The special cleats are available. Please contact us for details.
80
M
81
E
M
O
3. E NGINEERING
PLASTIC PRODUCTS
Engineering Plastics
Size Table.............................................P83, 84
General Purpose Engineering Plastics
1. Casting Nylon..................................................... P85
2. UHMW-PE.....................................................P86, 87
3. Polyacetal........................................................... P88
High Performance Engineering Plastics
1. PEEK® ................................................................. P89
Note
1. PEEK® is a registered trademark of Victrex®.
ENGINEERING PLASTIC
PRODUCTS
Size Table
A: Rod Type
Standard stocked item: ●
Name
Casting Nylon
(CN)
Grade
UD
(Ivory)
Improving mechanical strength
significantly and reducing physical
degradation under high temperature.
NB
(Blue)
Blue colored grade which maintains
physical properties of cast nylon UD.
CL
(Green)
Improving frictional property substantially
by our own lubricant formulation.
Excellent lubricity property by evenly
blending molybdenum disulfide
It has physical properties closer to casting
nylon while mechanical strength is enhanced
than standard nylon 6 extrusion products.
With small friction, it has excellent abrasion
and shock resistance as well as
antiadhesive properties. Also, nontoxic.
Better abrasion, thermal ageing and UV
resistance than UHMW-NA. Also, it has
high antistatic property.
UD (Ivory)
NB (Blue)
NA
(White)
Ultra-High Molecular
Weight Polyethylene
(UHMW-PE)
ASB
(Black)
ASG
(Mint green)
Light color, antistatic. Less surface
abrasion against plastic bottles.
Homopolymer (DELRIN®)
(White)
(Black)
Polyacetal
Copolymer (DURACON®)
Engineering Polymers
(White)
(POM)
(Black)
Copolymer-BG
(Green)
Grade
1,000×1,000
500×1,000
600×1,200
Ultra-High Molecular
Weight Polyethylene
(UHMW-PE)
940×1,920
1,000×2,000
600×1,200
Polyacetal Engineering
Polymers (POM)
PEEK®
(Polyetheretherketone)
500×1,000
500×1,000
Characteristics ●
●
500L
1,000L
●
●
●
●
●
●
●
●
300L
500L
1,000L
500L
1,000L
●
●
●
●
△
△
△
△
△
△
△
△
●
●
●
●
△
△
△
△
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
1,000L
●
●
●
●
●
●
●
●
1,000L
△
△
△
△
●
●
●
●
1,000L
1,000L
●
1,000L
1,000L
●
1,000L
(Light brown)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
(Unit:mm)
6
7
8
20 25 30 35 40 45 50 60 70 80 90 100 120
10 12 15
● ● ● ●
● ● ● ●
△ △ △ △
● ● ● ●
△ △ △ △
△ △ △ △
● ● ● ●
● ● ● ●
● ● ● ●
● ● ● ●
● ● ●
NA
● ●
ASB
NA
● ● ●
ASB
● ● ●
● ● ● ● ●
Copolymer (White)
(Black)
● ● ●
Homopolymer (DELRIN®) (White) ● ● ●
Copolymer (DURACON®) ● ● ● ● ● ● ● ● ●
(White)(Black)
● ● ● ● ●
Copolymer-BG (Green) ● ● ● ●
M5BK (Black)
● ● ●
NA
△ △
UD・ENB
CL
MD
UD・ENB
CL
MD
UD・ENB
UD・ENB
CL
MD
30 35 40 45
● ● ● ●
●
Non-stocked item: △
Plate Thickness
1 2 2 3 5
10 12.5 15 17.5 20 22.5 25
●
1,000L
Excellent mechanical properties and chemical resistance. Allpurpose High performance engineering plastic with maximum
continuous operating temperature of 240°C.
Standard stocked item: ●
Casting Nylon
(CN)
ENGINEERING PLASTIC
PRODUCTS
Excellent lubricity property addition to
mechanical strength and dimension
stability of polyacetal.
B: Plate Type
1,000×2,000
83
Excellent mechanical strength, especially
creep properties and fatigue resistance
NA
(Light brown)
8
1,000L
Excellent mechanical strength, fatigue
resistance and dimension stability.
PEEK®
(Polyetheretherketone)
Name
Outer Diameter
Length
4
5
6
500L
1,000L
Characteristics
MD
(Black)
Casting Nylon EX
(CN-EX)
Non-stocked item: △
●
● ● ● ● ● ● ● ● ● ●
●
● ● ● △ △ △ △ △ △ △
△
△ △ △ △ △ △ △ △ △ △
●
● ● ● ● ● ● ● ● ● ●
△
△ △ △ △ △ △ △ △ △ △
△
△ △ △ △ △ △ △ △ △ △
●
● ● ● ● ● ● ● ● ● ●
●
● ● ● ● ● ● ● ● ● ● ● ●
●
● ● ● ● ● ● ● △ △ △ △ △
●
● ● ● ● ● ● ● △ △ △ △ △
●
● ● ● ● ● ● ● ● ● ● ● ●
●
● ● ● ● ● ● ● △ △ △ △ △
●
● ● ● ● ● ●
●
● ● ● ● ● ●
●
● ● ● ● ● ●
●
● ● ● ● ● ● ● ● ● ●
●
● ● ● ● ●
●
● ● ●
●
● ● ●
△
△ △ △ △ △ △ △
●
△
△
●
△
(Unit:mm)
50
●
55
●
60
●
65 70
● ●
75
●
80
●
85
●
90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 380 400 450 500 550 600
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● △ △ △ △
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
△
△
△
●
●
●
●
●
●
●
●
●
●
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
●
●
●
●
●
●
●
●
●
●
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
●
△
●
●
△
△
△
△
△
△
△
△
△
△
△
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
△
△
△
△
△
△
△
△
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
△
△
C: Pipe Type
△
△
△
△
△
△
△
△
△
●
△
△
●
●
△
Non-stocked item: △
(Unit:mm)
Outer Diameter
Name Length Grade Inner Diameter 60 65 70 70 75 80 80 90 90 100 100 110 120 130 140 150 150 165 180 200 200 225 225 250 250 285 300 300 330 350 400 430
25 40 25 45 50 30 55 40 65 50 75 60 70 80 90 100 125 115 100 100 150 115 175 125 200 225 150 250 165 175 350 250
Casting 1,200
Nylon
(CN)
350
UD・NB
MD
UD・NB
CL
MD
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△ △
△ △
△ △
△
△ △
△ △
△ △
△ △
△
△ △
△ △
△ △
△ △
△
△ △
△ △ △
△ △ △
△ △ △
△
△ △ △
△
△
△
△
△
△ △
△ △
△ △
△
△ △
△ △
△ △
△ △
△
△ △
△ △ △
△ △
△ △
△
△ △
△ △
△
△
△
△
△ △
△
△
△
△
△ △ △ △
△ △ △
△ △ △ △ △ △ △
△
△ △ △
ENGINEERING PLASTIC
PRODUCTS
Note
1. DELRIN® is a registered trademark of DuPont®.
2. PEEK® is a registered trademark of Victrex®.
3. DURACON® is a registered trademark of Polyplastics K.K.
84
ENGINEERING PLASTIC
PRODUCTS
1. Casting Nylon
1-1. MEP® Casting Nylon Grades
■ CN-UD
Ivory
Load Bearing
■ CN-NB
Blue
Load Bearing
By improving mechanical strength, a characteristic of casting nylon, and reducing physical degradation
under high temperature, it can be used under heavy loads like machinery parts for where only metal is
used. CN-NB is a blue colored grade of CN-UD and has the same properties as CN-UD.
■ CN-MD
Black
Light Load Sliding
■ CN-CL Green
It has enhanced sliding property base on excellent
properties of casting nylon by evenly blending
molybdenum disulfide.
(Non-lubricated) Sliding
By our own patented production method, it has outstandingly high
abrasion resistance while maintaining the excellent properties of
casting nylon. Also, it has lubrication performance which withstands
prolonged operating time.
1-2. MEP® Casting Nylon EX Grades
■ CN-UDE Ivory Light to medium withstand load
■ CN-NBE Blue Light to medium withstand load
It has physical properties closer to casting nylon while mechanical strength is enhanced than standard nylon 6 extrusion products.
It is economical and best to be used as machinery parts such as small sized gears, roller bearings, rollers, etc.
CN-NBE is blue colored grade of CN-UDE with the same properties as CN-UDE.
1-3. Applications
①
③
⑤
⑦
Metal and steel facility
② Transport equipment
Construction machinery
④ Machine tools
Industrial machinery
⑥ Shipbuilding, heavy industrial machinery
LCD, semiconductor manufacturing equipment
1-4. Properties of Casting Nylon
Table 1. Properties of Casting Nylon
ENGINEERING PLASTIC
PRODUCTS
Property
85
ASTM Test
Unit
CN-UDE
CN-NBE
CN-UD
CN-NB
CN-MD
CN-CL
1.15~1.16
78 ~93
20~50
3.0~3.5
93~108
103~123
34~54
1.16~1.17
74~83
15~40
2.8~3.3
88~98
98~118
30~50
1.12~1.13
59~74
10~40
2.0~2.5
74~83
78~93
37~65
1.15
76
48
2.9
91
110
33
113~117
0.20
1,046
9.0
120~150
170~195
205~210
1014
18~22
107~112
0.20
1,046
8.6
100~120
105~115
170~180
1014
18~22
120
0.20
1,250
9.0
100~120
94
193
1014
25.0
Density
Tensile Strength
Tensile Elongation
Secant Modulus
Compressive Strength
Flexural Strength
Izot Impact Strength
(1/2in x 1/2in notched)
Rockwell Hardness
Thermal Conductivity
Specific Heat Capacity
Coefficient of Thermal Expansion
Continuous Use Temperature
Heat Distortion
D792
D638
D638
D638
D695
D790
D256
MPa
%
103MPa
MPa
MPa
J/m
D785
C177
D696
D648
R scale
W/(m・K)
J/(KG・K)
10-5 ℃
℃
℃
Volume Resistance
Dielectric Strength
(Short interval 3.2mm)
Relative Permittivity
D257
D149
Ω • cm
KV/mm
115~120
0.20
1,046
8.0
140~170
185~200
210~215
1014
18~22
Loss Tangent
D150
Water Absorption
(24 hours 3.2mm)
Allowable PV Index
D570
%
3.7
3.7
3.7
0.02
0.02
0.02
0.5~0.9
3.7
3.7
3.7
0.02
0.02
0.02
0.9~1.2
3.7
3.7
3.7
0.02
0.02
0.02
0.6~0.8
4.0
3.7
3.4
0.01
0.04
0.04
1.3
820
980
2,290
820
D150
-
kPa・m/sec
2. UHMW-PE
(Ultra-High Molecular Weight Polyethylene)
2-1. MEP® UHMW-PE Grades
■ UHMW-NA
White
Standard Grade
UHMW-NA is a standard grade of Ultra-High Molecular Weight Polyethylene whose molecular
weight is from 3.5 to 6.5 million. It has excellent abrasion resistance, low friction coefficient,
antiadhesive property, chemical resistance, cold resistance and food safety.
■ UHMW-ASB Black
High Antistatic Grade
UHMW-ASB is a grade with high antistatic performance. Its surface resistance is at a very low level of 104,
thus making it suitable to use as a static protection in LCD and semiconductor manufacturing equipment.
Also it has excellent abrasion and weather resistance.
■ UHMW-ASG Light Green
Antistatic Grade
UHMW-ASB is an upgrade of UHMW-ASG, which antistatic property is added. Its surface
resistance is 1011. It has high abrasion resistance and suitable for food production and
bottling lines. Particularly, it has a low friction coefficient and good anti-abrasion, and does
not scratch PET plastic containers.
2-2. Applications
①
③
⑤
⑦
Food production facility
Cement facility
Fodder storage facility
Chemical facility
② Transport equipment ④ Coal storage facility
⑥ LCD, semiconductor manufacturing equipment
2-3. Properties of UHMW-PE
Table 2. Properties of UHMW-PE
ASTM Test
Unit
Density
Tensile Strength
Tensile Elongation
Secant Modulus
Compressive Strength
Flexural Strength
Izot Impact Strength
(1/2in x 1/2in notched)
Rockwell Hardness
Thermal Conductivity
Specific Heat Capacity
Coefficient of Thermal Expansion
Continuous Use Temperature
Heat Distortion
D792
D638
D638
D638
D695
D790
D256
103MPa
MPa
MPa
J/m
D785
C177
D696
D648
R scale
W/(m・K)
J/(KG・K)
10-5 ℃
℃
℃
Volume Resistance
Dielectric Strength
(Short interval 3.2mm)
Relative Permittivity
D257
D149
Ω ・cm
KV/mm
Loss Tangent
D150
Water Absorption
(24 hours 3.2mm)
Allowable PV Index
D570
MPa
%
D150
-
%
kPa・m/sec
UHMW-NA
UHMW-ASB
UHMW-ASG
0.94
37
365
0.5
19
26
No damage
0.96
28
250
0.6
19
25
No damage
0.98
28
215
0.4
15
15
No damage
52
0.38
2,300
20
55
0.44
2,200
19
53
0.38
2,300
19
80
96
>1013
-
80
98
104
-
80
78
1011
-
2.3
1~2 × 10-4
1~2 × 10-4
1~2 × 10-4
<0.01
2.3
1~2 × 10-4
1~2 × 10-4
1~2 × 10-4
<0.01
2.3
1~2 × 10-4
1~2 × 10-4
1~2 × 10-4
<0.01
490
490
490
ENGINEERING PLASTIC
PRODUCTS
Property
86
ENGINEERING PLASTIC
PRODUCTS
2-4. UHMW Rail Dimensions
UHMW Rail
Flat Rail
Wear Tape
Rail Thickness
(mm)
3
Width (mm)
Roll Length (m)
NO
15
50
Width (mm)
1/4
6.35
15.5
3
20
50
1/2
12.7
15.5
3
25
50
3/4
19.05
15.5
3
30
50
1
25.4
15.5
3
40
50
31.75
15.5
3
50
50
2
50.8
15.5
4
25
40
3
76.2
15.5
4
30
40
4
101.6
15.5
4
40
40
6
152.4
15.5
4
50
40
12
304.8
15.5
5
20
30
18
457.2
15.5
5
25
30
5
30
30
5
40
30
5
50
30
6
20
25
6
30
25
6
40
25
6
50
25
1 1/4 Roll Length (m)
V6-Type
V3-Type
C-Type
for φ 12
End Plate for Chain Rail
Thickness (mm)
Width (mm)
Length (m)
Thickness (mm)
Width (mm)
Length (m)
5
20
500
5
20
65
5
25
500
5
25
65
5
40
500
5
40
65
6
20
500
6
20
65
6
25
500
6
25
65
H-Type Rail
Color: White
Type
Type
Type
L-type
White
5 × 20 × 1,000
5 × 25 × 1,000
(Note) Standard length is 50m/ a roll
H-Type
Wear Tape
0.25mm thickness UHMW-NA tape with adhesive
exfoliating paper on one side can be used on the
places where rails cannot be mounted.
Chain Rail
L-Type Rail
L-Type
C-Type
for φ 10
Snap-on Type
A-Type
AⅡ-Type
(Note) (1)Attachment bracket ST5S is JPY 500/piece.
(2)Standard length is 1000mm.
V-Type Rail
R-Type for φ 10
Color: White
Type
Type
V3 -type
0
V6 -type
0
(Note) Standard lengths for V3 and for V6 are 100m and 50m/ roll respectively.
ENGINEERING PLASTIC
PRODUCTS
Snap-On Rail Color: White
87
C-Type Rail
Color: White
Type
Length
Type
Length
SNP-type
30m
For φ 10
3m
For φ 12
3m
R-Type Rail
Color: White
Type
Length
For φ 10
For φ 12
A-Type Rail
Color: White
Type
Length
3m
A -type Rail
3m
3m
AII-type Rail
3m
R-Type for φ 12
3. Polyacetal
3-1 MEP® Polyacetal Grades
■ Polyacetal
Homopolymer
White, Black (DELRIN®)
Engineering plastics with well balanced properties of mechanical strength, electrical properties and
dimension stability Also, it has good fatigue resistance and superior machining properties. Mass production
of parts possible by injection molding.
■ Polyacetal
Copolymer
White, Black (DURACON®)
Engineering plastic with well balanced properties of mechanical strength, electrical properties and
dimension stability Also, it has good cleavage resistance and superior machining properties.
Mass production of parts possible by injection molding
■ Copolymer-BG
Green
High Sliding Performance Grade for light/medium load
A grade of polyacetal copolymer with special lubricant Excellent sliding performance for light to medium load with
mechanical strength, electrical properties and dimension stability Not only use in industrial machinery, it is also used
as a sliding component in LCD manufacturing system since it has well recognized wear resistant property.
■ M5BK
Black
High Sliding Performance Grade for medium/heavy load
A grade of Polyacetal copolymer with special lubricant Excellent sliding property with mechanical strength,
electrical properties and dimension stability Not only use in industrial machinery, it is also used as a sliding
component in construction machineries since it has well recognized wear resistant property.
Note
1. DELRIN® is a registered trademark of Dupont.
2. DURACON® is a registered trademark of Polyplastics K.K.
3. BESTAL® is a registered trademark of Bayer AG.
3-2 Applications
① Food production facility
③ LCD, semiconductor manufacturing equipment
⑤ Packing machines
② Transport equipment ④ Construction machineries
⑥ Electronic components manufacturing equipment
3-3 Properties of Polyacetal
Table 3. Properties of Polyacetal
ASTM Test
Unit
Density
Tensile Strength
Tensile Elongation
Secant Modulus
Compressive Strength
Flexural Strength
Izot Impact Strength
(1/2in x 1/2in notched)
Rockwell Hardness
Thermal Conductivity
Specific Heat Capacity
Coefficient of Thermal Expansion
Continuous Use Temperature
Heat Distortion
D792
D638
D638
D638
D695
D790
D256
MPa
%
103MPa
MPa
MPa
J/m
D785
C177
D696
D648
R scale
W/(m・K)
J/(KG・K)
10-5 ℃
℃
℃
Volume Resistance
Dielectric Strength
(Short interval 3.2mm)
Relative Permittivity
D257
D149
Ω ・cm
KV/mm
Loss Tangent
D150
Water Absorption
(24 hours 3.2mm)
Allowable PV Index
D570
D150
-
%
kPa・m/sec
Homopolymer
Copolymer
Copolymer-BG
M5BK
1.42
69
12
2.8
124
97
69
1.41
61
12
2.8
108
89
69
1.38
54
50
2.0
74
72
59
1.38
57
14
2.0
66
75
40
120
0.17
1,460
9
90
124
170
6 × 1014
15
115
0.17
1,460
10
90
110
158
6 × 1014
20
114
0.17
10
90
105
1014
18
114
0.17
10
90
110
-
3.7
3.7
3.7
0.003
0.002
0.005
0.25
3.7
3.7
3.1
0.001
0.002
0.007
0.22
0.22
0.22
490
490
1,300
1,600
ENGINEERING PLASTIC
PRODUCTS
Property
88
ENGINEERING PLASTIC
PRODUCTS
4. High Performance Engineering Plastics
4-1 MEP® High Performance Engineering Plastics Grades
■ PEEK®-NA Light Brown Heat & Chemical Resistant Grade
A high performance engineering plastic with comparable to Teflon for its heat and chemical resistance.
It also has mechanical strength, electrical properties and machinability to casting nylon. Injection molding possible.
Used in many applications such as LCD / semiconductor manufacturing equipment, chemical equipment, plating equipment and logistic facility.
Note
1. PEEK® is a registered trademark of Victrex®.
4-2 Applications
① LCD, semiconductor manufacturing equipment
③ Plating industry
⑤ Medical equipment
② Chemical production equipment
④ Aerospace industry
⑥ Electronic component manufacturing equipment
4-3 Properties of PEEK®-NA
Table 4. Properties of High Performance Engineering Plastics
Property
ASTM Test
Unit
PEEK®-NA
Density
D792
Tensile Strength
D638
MPa
97
Tensile Elongation
D638
%
80
Secant Modulus
D638
103MPa
2.8
Compressive Strength
D695
MPa
127
Flexural Strength
D790
MPa
142
Izot Impact Strength
(1/2in×1/2in notched)
D256
J/m
59
Rockwell Hardness
D785
scale
M98
Thermal Conductivity
C177
W/(m・K)
0.2
Specific Heat Capacity
−
J/(KG・K)
1,330
D696
10-5 ℃
4.8
−
℃
240
Heat Distortion
D648
℃
Volume Resistance
D257
Ω・cm
1013〜1014
Dielectric Strength
(Short interval 3.2mm)
D149
KV/mm
19
Relative Permittivity
D150
Coefficient of Thermal Expansion
Continuous Use Temperature
1.30
152
−
3.2〜3.3
−
−
0.0016
Loss Tangent
D150
−
ENGINEERING PLASTIC
PRODUCTS
−
89
Water Absorption
(24 hours 3.2mm)
D570
%
0.14
Allowable PV Index
−
kPa・m/sec
−
PEEK®-NA
■ Global Factories & Sales Offices
MITSUBOSHI POLAND Sp. z o.o.
MBL ANTRIEBSTECHNIK
DEUTSCHLAND GmbH
MBL SHANGHAI INTERNATIONAL
TRADING CO.,LTD.
SUZHOU MITSUBOSHI
BELTING CO.,LTD
MBL(USA)CORPORATION
JAPAN
MOI TECH HONG KONG LIMITED
MITSUBOSHI BELTING VIETNAM Co., Ltd.
STARS TECHNOLOGIES
INDUSTRIAL LIMITED
MITSUBOSHI BELTING-INDIA
PRIVATE LIMITED
MITSUBOSHI OVERSEAS
HEADQUARTERS
PRIVATE LIMITED
P.T. MITSUBOSHI BELTING INDONESIA
P.T. SEIWA INDONESIA
■ JAPAN
●MITSUBOSHI BELTING LTD.
(Kobe Head Office)
4-1-21 Hamazoe-dori,Nagata-ku,
Kobe 653-0024
Tel: +81-78-671-5071 Fax: +81-78-671-8879
(Tokyo Head Office)
Nihonbashi Plaza Bldg.10F
2-3-4 Nihonbashi, Chuo-ku,
Tokyo 103-0027
Tel: +81-3-5202-2500 Fax: +81-3-5202-2520
■ ASIA
●MITSUBOSHI OVERSEAS HEADQUARTERS
PRIVATE LIMITED
14 Jurong Port Road, Singapore 619091
Tel:+65-6265-3933 Fax:+65-6265-0954
E-mail:[email protected]
●STARS TECHNOLOGIES INDUSTRIAL LIMITED
Eastern Seaboard Industrial Estate 64/40 Moo 4 ,
Tambon Pluakdaeng Amphur Pluakdaeng , Rayong 21140
THAILAND
TEL:+66-38-954-738 FAX:+66-38-954-740
●P.T. SEIWA INDONESIA
Blok M-2-2, Kawasan Berikat MM2100
Industrial Town, Cibitung, Bekasi Jawa Barat 17520, Indonesia
Tel:+62-21-898-0324 Fax:+62-21-898-0325
●P.T. MITSUBOSHI BELTING INDONESIA
Km. 8 Raya Serang
JN. Industri Raya Blok D No. 4
Desa Pasir Jaya, Jatiuwung Tangerang, Indonesia
Tel:+62-21-593-07118 Fax:+62-21-590-2071
●MBL SHANGHAI INTERNATIONAL TRADING CO.,LTD.
F8 , NO.601 Tianshan Road , Shanghai , China
Tel:+86-21-5206-7008 Fax:+86-21-5206-7011
●SUZHOU MITSUBOSHI BELTING CO.,LTD
277 Liangang Road Suzhou New District Jiangsu, China
Tel:+86-512-6665-8880 Fax:+86-512-6665-8886
●MOI TECH HONG KONG LIMITED
Unit2, 21F, CCT Telecom Building, No.11 Wo Shing Street, Shatin,
New Territories, Hong Kong.
Tel:+852-2403-5978 Fax:+852-2422-8308
●MITSUBOSHI BELTING-INDIA PRIVATE LIMITED
W-191F, TTC Industrial Area, MIDC, Thane-Belapur Road,
Navi Mumbai 400710, Maharashutra, India
Tel:+91-022-27788431 Fax:+91-022-27788439
E-mail:[email protected]
●MITSUBOSHI BELTING VIETNAM Co., Ltd.
Room No.19, 2nd Floor, Newlife Building
No.6 Nguyen Thi Thap St., Trung Hoa Ward,
Cau Giay Dist., Hanoi, VIETNAM
Tel:+84-4-3791-5142 Fax:+84-4-3791-6203
■ AMERICA
●MBL(USA)CORPORATION
601 Dayton Road, Ottawa IL 61350-9535 USA
Tel: +1-815-434-1282 Fax: +1-815-434-2897
E-mail: [email protected]
URL: http://www.mblusa.com
■ EUROPE
●MBL ANTRIEBSTECHNIK DEUTSCHLAND GmbH
Bussardweg 10, D-41468 Neuss, Germany
Tel:+49- 2131-740940 Fax:+49- 2131-7409424
E-mail: [email protected]
●MITSUBOSHI POLAND Sp. z o.o.
Budynek B8 ul. 3-go Maja 8, 05-800 Pruszkow,Poland
Tel:+48-22-7383930 Fax:+48-22-7383939
(As of January 2013)
90
MITSUBOSHI BELTING LTD.
The information contained herein is for information purposes only, and does not
enlarge, amend or imply any warranty other than provided by the manufacture with
the product. Any use of the product not in conformance with the manufacture's
instruction must be dangerous.
V8260501304Ur①652875
Printed in Japan

Similar documents

FLEXSTAR® Belt - MBL(USA) Corporation

FLEXSTAR® Belt - MBL(USA) Corporation Agricultural use (for vegetable harvestor) Rubber Agricultural use (for straw conveyor) General use, Office & Home appliances, agricultural use

More information

GIGA TORQUE GX Timing Belt Design Manual

GIGA TORQUE GX Timing Belt Design Manual Do not use a belt beyond its capacity or for an application other than that specified by the catalog, design documents, etc. This can cause premature failure of the belt. If water, oil, chemical, p...

More information