Architectural Brochure

Architectural Brochure
Technology and Ingenuity for Green Buildings
TOTAL SOLUTION TO BUILDING’s THERMAL, NOISE AND VIBRATION
E-mail: [email protected] . www.gingel.com
Building Insulation Treatment
Gingel Cell-Spray
The finished product is a strong, durable monolithic layer of high
performance multi function insulation system with hard-flexible
layer at the bottom of predetermined thickness of this system layer.
This bottom layer greatly enhances its STC & IIC performances.
Naturally - Tough & Naturally - Attractive
Custom - Multifunction Spray System
Our product is designed for high performance multifunction (selfsupporting) spray-applied treatment system tailored to your various
project’s requirement: Acoustic / Sound control treatment (Sound
reverberation, Sound transmission and Impact noise) and Thermal
control treatment (High Efficiency Thermal Conductivity &
Condensation Control) with durable – aesthetic interior texture
finishes and choice of color. No additional finishing is required.
Our premier R & D and excellent Engineering Team, combined with
over 50 years field experience, is capable to support projects and
recommend suitable design for application to meet and exceed
your specific requirement at economical cost.
We utilize advanced fiber technology in production ensuring
highest-grade finish product with unmatched efficiency and
performances. Superior performances at an economical value with
fast-track application compared with conventional insulation and
duplicate product in the market, while providing benefits of our
product's performances to clients.
(Caution: Duplicate product may look similar but it is far inferior in
terms of overall performances and its resiliencies against
weathering. Overtime, it will deform and subsequently delaminate).
With its carpet-like texture and wide variety colors, our product is
especially attractive as a surface finish of ceilings in new
construction as well as renovation projects. For wall & ceiling
application in intense noise and tough environment, special method
of application is utilized. Available in five standard colors (specially
matched custom color is also available):
*Color selection will affect price. Chart shows as close color appearance.
Special Features
Our product forms a monolithic layer with dead air spaces between
and within its hollow fibers. Because of the specially designed &
controlled spray system, they fill cracks, voids and seams forming
monolithic layer over the substrate, which virtually eliminates air
infiltration. Unlike conventional and prefabricated insulation, which
tends to be compressed during handling and shipment, and
creates cracks and voids during installations also settling and
sagging after installation, our product has no voids or compressed
areas that reduces thermal efficiency and acoustical properties.
Designed for compatible, versatile and economical applications
with maximum multifunction performance. Our product can be
applied to virtually any surface configuration: Concrete, Steel,
Wood, Aluminum, Urethane, Styrofoam, Board, Glass and other
construction materials. It can be applied of up to 125 mm thick
overhead without mechanical support. It serves as exposed ceiling
finishes. (Note: Certain type of surface requires sealing to prevent
migratory staining.)
A Total Treatment System:
High performance, Durable and Self-Supporting System
Our product means: A Total System of light pure natural treated
fiber applied with special compatible binder utilizing specially
designed equipment with guided application method to form a selfsupporting treatment system that produces unequalled
performances.
Cell-Spray is manufactured under very strict quality control through
most modern process utilizing “state of the art” technology to form
high quality fiber that resistance to fire, mold, mildew and
insecticide. It should be applied by licensed/authorized
applicators only. They are properly trained and capable to apply
product and to control proper fiber & binder mixes with our
proprietary equipment for various type of applications. During
application, our genuine fiber mixed with our patented compound
binder CP-2002®.
One of the world’s landmark and its huge shopping spaces at connecting bottom
floors, includes its mechanical rooms, treated with our product for sound control
and much needed thermal control.
CP-2002® is a specially designed compound binder when
combined with components in our fiber forms truly unique and high
performance system with unequalled bond strength allowing
applications of up to 125 mm thick without mechanical support
(Bond strength over 200 times its weight or > 70 PSF).
Building Insulation Treatment
Thermal Performance & Condensation Control
As a result of the special features above, is a more effective inplace product with exceptionally low heat transfer characteristics
(Thermal Conductivity per ASTM C-177 & C-518 : R value = 4.54
@1” thick). This saves great deal cost of buildings energy
consumption in today's increasing energy cost.
For areas such as indoor pools, ice arenas, air plenum, mechanical
rooms and 24-hour air-conditioned rooms; our product aids in
condensation and greatly helps to maintain in-door temperature
both for space with and without air conditioner.
Proper combination of our product and ventilation prevents
condensation on metal, concrete and other surfaces. Thus, our
installed product significantly saves your building’s energy
consumption and actually reduces ventilation requirement, saving
both your ventilation equipment and building's energy operating
costs.
Gingel Cell-Spray
Theaters at this innovative and prestigious Hotel, Resort & Casino project were
treated with Cell-Spray to provide pleasant indoor sound environment.
Acoustical Performance
Our resilient fibers absorb energy instead of reflecting it, reducing
reverberation time and making speech and music performance
more intelligible. Excessive unwanted noise is eliminated with the
application of our product that greatly improves ambient sound
quality in a wide variety of building projects, including: Auditorium,
Convention & Exhibition Centers, Churches and other Religious &
Worship Facilities, Discotheques and Entertainment Centers,
Factory & Industrial Facilities, Meeting Facilities, Music Halls,
Offices, Parking Garage, Power / Mechanical Rooms, Recording
Studios, Retail Spaces, Schools and Universities, Sport facilities,
Television and Movie Production Studios, and many others.
This Luzern office in Swiss treated entirely with Cell-Spray to provide ideal sound
ambient, supporting room lightings and greatly save building’s energy
consumption.
Yio Chu Kang Indoor Stadium, Singapore.
Field Sound Test Results
Building Insulation Treatment
Gingel Cell-Spray “fc”
Fine Finish & High NRC - Acoustic Ceilings
Product Description
Highlight Performances
Non combustible in compliance with BS 476 Part 4 : 1970
Our FC Acoustic Finish product line is an excellent spray-applied
acoustical texture finishes for a wide variety low exposed ceiling
projects.
It provides high performance solution to acoustical and lighting
objectives, while conserving energy, in new construction and
renovation projects, with attractive finishes.
Its fine finish provides aesthetic appearance suitable for ceiling’s
application at executive offices, churches, mosques, banks,
automobile showrooms, auditoriums, class rooms, airport
passenger terminals, libraries, hotels and luxury apartments.
Available in Arctic White, White and specially matched custom
colors.* (*call us for pricing.)
Acoustical Performance
As tested by NVLAP accredited acoustical laboratory in compliance
with ASTM C-423, our product provides exceptionally high Noise
Reduction Coefficient (NRC). Typical application of 12.5 mm thick
on solid backing has an unequalled NRC of 0.65.
Theater of Dreams in many locations are treated with our FC Acoustic Finish for
excellent sound performance and interior considerations.
Substrate Compatibility
Our product conforms to any surface configuration such as barrel
vaults, concrete “T”, corrugated decking and other complex
surfaces. Combined with our patented compound binder
CP-2002®, our product bonds to virtually all construction
substrates including: all kind of boards, plaster, wood, oxidized
metal and concrete.
*Some surfaces (water stained ceilings, wood and oxidized metal)
require sealing to prevent migratory staining.
Durability and Maintenance
FC Acoustic Finish applied to reduce reverberation in this lecture hall &
auditorium while greatly enhances its interior lighting, making it excellent space
environment for lecturing & music performance.
Our strong, resilient bond of CP-2002® combined with special
components in our fine fiber forms applied acoustic finish product,
with unequalled acoustic properties, that provides remarkably
durable surface.
It resists impact and abrasion with “no cracking or spalling”, which
is typical to many cementitious, plaster based materials and copy
product in the market.
In areas where even higher abrasion resistance may be desirable,
our special “Dura-FC” may be specified. This product provides
even greater bond and compressive strength without reducing its
acoustical performances.
Highlight Performances
NRC Values - ASTM C-423
Kindergarten School, Singapore.
Field Sound Test Results
Building Insulation Treatment
Gingel Cell-Spray
Gingel Cell-Spray Elite
Gingel Cell-Spray CL
Gingel Cell-Spray fcx
Gingel Cell-Spray fc
Gingel Cell-Spray K-13 S
Gingel Cell-Spray K-13
E-mail: [email protected]
. www.gingel.com
Building Insulation Treatment
Building Insulation Treatment
Gingel INSUL-PAC
High Performance Roofing Treatment System
Our product (on site application) provides ideal treatment (Thermal & Impact Noise) of this New Shopping Mall while providing pleasant indoor's sound environment.
Product Highlights
Prefabricated or on-site installation with our custom design, of
highly resilient Cell-Spray specially made fiber base combined with
CP-2002® and our patented components.
Insul-Pac is truly an innovative product made from high technology
processed materials and components resulting an unsurpassed
light weight treatment system, with highest STC and IIC ratings, in
construction industry today.
It is truly lightweight with effective acoustic and thermal control
treatment, custom design that enabling more flexible building's
design, while significantly reduce project structural cost. *Typically
reduce 25% or more.
This new Theaters with titanium roofing system treated with our product to
eliminate impact noise and for high efficiency thermal conductivity.
In addition to high STC and IIC performance, it has high efficiency
thermal conductivity that greatly helps to prevent condensation
while greatly saving building’s energy consumption costs.
Insul-Pac has one-hour fire endurance rating. Unlike conventional
insulation or other copy product, Insul-Pac is non-corrosive and
contains no corrosive binder thus it prolongs the life span of metal
roofing system.
Insul-Pac was awarded as Most Innovative Building's Product
2002.
Building Insulation Treatment
Gingel INSUL-PAC
Acoustic Ultra Line
Product Information
Made of Strong Reinforced Natural Fiber, high performances,
aesthetic finishes and easy installation are always our intentions in
developing new product. This Ultra Line acoustical product is a
testimonial to that effect. After going through rigorous tests with
stringent standards and gaining reputation with excellent track
records in North America and Asia, is now become highly
demanded building product. Combined with applications of CellSpray under Metal roof and Ceiling help establishing green energy
saving buildings while having pleasant and save environment. All
items can be supplied with pure Aluminum Foil or Poly liner at any
thickness and dimension customized to your needs. Our products
are recommended by the American Institute of ArchitectsSustainable Design, US Green Buildings Council and many US
Builders. Featured in Green Buildings campaign through
broadcasts by ABC, CBS, House & Garden TV and Discovery
Channel.
This is truly innovative ‘do it yourself’ environment friendly product
with great performances, durability and attractive finishes. Used by
OEM Industries for various applications i.e. HVAC, home theater,
engine heat covers, seals, pump housing and refrigeration
compartments etc. Test results & Approvals and partial project
reference are presented in this publication.
Type “W” Suitable for Walls, Roofs and Ceilings.
Wall Treatment Application.
Above Ceiling (Attic) Application Thermal & Noise damping.
Type: “W” - Insulation
Type: “W” comes in basic marble blue 3.5” and 2” thick (24” width X
94” length). Special order up to 5.5” thick & custom dimension are
available. In compliance with US-EPA standard and this no-itch
insulation is easy to handle and install. Passed ASTM C739 test.
Wall panel fitting accessories & lining are available.
Fibers are treated with US-EPA registered fungal inhibitor that
offers excellent protection against mold, mildew, fungi and pests.
Fire resistance and non-corrosive and no odor emission. Contains
no formaldehyde and no itch or skin irritation. Resists microbial
growth with excellent thermal value that saves building’s energy
consumption. This product is "pre-scored" at the plant for easy
tear-off to meet site dimension (no tools required for size
adjustment at pre-scored dimension) R value = 3.85 @1” thick.
Building Insulation Treatment
Gingel INSUL-PAC
Acoustic Ultra Line
Acoustical Panel - Type: “A”
This truly ‘Do It Yourself’ Acoustical Panel, made of 100%
reinforced natural fiber produce high acoustical performances and
durable with high aesthetic finishes. There is no additional
wrapping or lining necessary. Available in standard 2’ X 4’ in basic
marble blue and other (special custom matching color and
dimension is available). (See color chart.)
Hanging Baffles Indoor Sports Arena.
It saves labor content greatly with simple applications made faster
projects completion. No shelf-life, tested in compliance with various
ASTM stringent standards and performance charts below show
some of essential use of this product on your next projects,
whether that improvement or newly develop projects. Homes &
Commercial projects need this product.
Gymnasium & Multipurpose Room - Hanging Baffles
Acoustic Wall Panel - TV Studio.
Color Chart
NOTE:
For product Approvals & Ratings, Technical Specifications and Standard Compliances
Building Insulation Treatment
Gingel INSUL-PAC
Acoustic Ultra Line
Motor Vehicle
Ford Plant - AHU Rooms, Singapore.
Sports Arena becomes Concert Hall.
This Arena hosted multi events from Basket Ball Games to
Academy Awards and Grand Musical Shows.
Building Insulation Treatment
Gingel INSUL-PAC
Acoustic Ultra Line
Acoustical Panel - Type: “U” - Ultra Line
This top of the line product has higher durability and performance. It
is more rigid and durable. There is no additional lining or finishes
necessary. Its ready to be installed as finished product. It greatly
speeds up project’s schedule while providing more flexible design
to Architects and Interior Designers. In addition to general standard
ASTM requirement this product has been tested in accordance with
ASTM C423, E90 and E413 as well as ASTM E1332.
Wall & Ceiling - Modeling Photo Studio.
Typical Wall Panel Installation
* Adhesive may be replaced with 1” wide Velcro - as required.
OEM Industries.
Indoor Swimming Pools
Fellowship Hall Acoustics - Ceiling Clouds.
Building Insulation Treatment
Gingel INSUL-PAC
WALL LINER SYSTEM
Advanced Wall Systems
Cecil B. Deville Screening Room, Sony Pictures
Product Description
Installation of durable and effective acoustical substrates becomes
very essential in today’s digital surround sound technology.
Wall Liner is made of 100% high quality ABS resins that forms
strong and durable wall frame systems with high resiliency against
loosening its grip of the fabric wall covering materials. (*Most
competitors product made of PVC with conventional design system
that easy to be wearied and loosen the fabric or overtime cannot be
unlocked and re-used.)
This patented re-usable wall mounting system is designed for hightensioned wall mounting system, with easy installation.
The Wall - Liner’s “Stretch - Tension - Lock” features produce wall
covering with great strength and rigidity.
Its Lock-on and Lock-off system enable users to adjust, remove
and replace fabric coverings at anytime needed.
Combined with installation of either our Cell-Spray or Insul-Pac,
this excellent high-tensioned system is specifically designed for
effective in room noise reduction and beautiful appearance, with
high resiliency.
Performances
This system passed ASTM E-84 Class A Fire Rating and passes
wide range of toxicity stringent UPIT tests to meet with EU
Countries and other Building’s Authorities.
Its high-tensioned system makes it reliable for building’s acoustical
design while providing beautiful appearance.
The Sony Pictures Screening Room, Enterprise Recording Studio
and the 100,000 SqM Staple‘s Center in Los Angeles are among
our satisfactory customers.
The famous Staple’s Center, known for high level Sports Arena
and Concert Venue, runs over 4 million people through the facility
each year. The traffic is next to fabric covering that stay’s tight, and
can’t be pulled out or loosened.
Special Features
Sports Arena becomes Concert Hall with neat, strong and
exchangeable interior lining looks.
Its positive locking and unlocking capability is a new invention in
the industry. This feature is second to none in the market. The
strong ABS material base produces reusable system. Its easy
installation makes it possible for self-installation by our home and
commercial clients.
We provide very accurate and detail Installation Guideline to our
clients assuring proper and ease of installation of this great
system.
Building Insulation Treatment
Gingel INSUL-PAC
The Famous Enterprise Recording Studio - Hollywood.
Main Ball Room, Century Plaza Hotel - Los Angeles.
100,000 SqM The Staples Center - Los Angeles. Sports Indoor Arena, Musical Concerts and Academy Awards Venues.
Moot Court Room at University of Nevada Las Vegas (UNLV) - Las Vegas. Deerfield Academy
Auditorium, Boston.
Building Insulation Treatment
Gingel INSUL-PAC
SPECTRUM ACOUSTIC WALL
Product Highlights
Pre-fabricated from Cell-Spray fiber base with special component.
It is non-combustible and forms interlocking high performance
acoustic layer for excellent sound absorption. It can also be
installed on site for better and tighter acoustic performance.
Specially designed for those who demand superior acoustic
performance with beautiful finishes. Our standard lining is
trackable, durable and washable for easy maintenance.
With R value of 9.08 and a one-hour fire endurance rating, our
acoustic wall panel has become standard for many new exhibition
centers, auditoriums, schools, music halls, conference rooms and
executive offices. Come in standard dimension of 600 mm (width) x
1200 mm (height) x 50 mm thick. Special Design & Dimension is
available.
** Special design with perforated metal/aluminum lining is available
upon request.
La Salle - SIA Arts College, Singapore - Auditorium, on site wall treatment to meet
specific artistic wall design.
Special Order & Design
Special design shapes and finishes are available upon request.
Color Sample
Typical Wall Installation
TV Studio - News Room treated with our special design wall panel.
Sound Absorption Coefficient per ASTM C-423
Building Insulation Treatment
Approvals and Ratings
APPROVALS AND RATINGS
Fire Ratings
1. Enhanced Application
Non-combustible in accordance with BS 476 Part 4:1970. For 50 mm thick application passed 71 minutes (one-hour and 11
minutes) Fire Endurance test in accordance with ASTM E-119.
2. Standard Application
Classified as Class 1 Building’s material, Class ‘A’ rating per ASTM E-84, UL-723, NFPA-255 and UBC-42. For 2” thick
application - passed one-hour Fire Endurance test in accordance with ASTM E-119.
Thermal Conductivity
Thermal Conductivity (ASTM C-177 & C-518): R value = 4.54 @1” thick. * Thermal conductivity is tested / measured at mean
temperature of 70ºF. Our product performs even more efficient at lower and higher than mean temperature.
Acoustical Performance
As listed in each individual product’s page along with other specific tested performance of each product’s line.
Other Approvals & Listings
1. ICBO (International Congress of Building Officials) – No. 2262
2. SBCCI (Southern Building Code Congress International) – No. 9566
3. UL (Underwriters Laboratories) – No. R-5499
4. US Federal Defense Logistics Agency – Cage Code: ONJU2
5. US Department of NAVY Guide Specifications – NFGS 07218
6. Corps of Engineers Guide Specifications – CE 201.01
7. US Federal Specifications - # SS-S-111C
8. Office of Noise Control
9. Factory Mutual Research – Nos. 19678, 20399 and 24703
10. California Bureau of Home Furnishing Standards
11. OSHA (US Occupational Safety and Health Administration)
12. IARC (International Agency for Research on Cancer)
13. NTP (National Toxicology Program)
14. US – EPA (Environmental Protection Agency) – EPA 40 CFR Part 248
15. MFPA – Germany
16. SPC – Luxembourg
17. STS Institute – Holland
18. BBZ – Swiss
19. TUV SUD PSB, Singapore
20. Bomba, Malaysia
21. LIPI, Indonesia
Building Insulation Treatment
Approvals and Ratings
APPROVALS AND RATINGS
Other Tests Result
1. Cohesion & Adhesion – Bond Strength (ASTM E-736) Min. >200 times its weight = >70 PSF For FC Acoustic Finish –
please refer to page – Cell-Spray - Acoustic Finish. Cohesive Strength at time of application: >700 gms
2. Test results per ASTM C-739 & C-739a
a. Smoldering Combustion Less than 1% weight loss (maximum permissible 15%)
b. Fungi Resistance No growth
c. Moisture Vapor Absorption % Weight gain = 1.3% (maximum permissible 15%)
d. Odor Emission: No perceptible
e. Corrosion (ASTM E-739a) Steel = No perforations, Aluminum = No perforations & Copper = No perforations
3. Substrate Bond Deflection (ASTM C-1149) Meet (and exceed) ASTM C-1149 standard for spray applied product
4. Air Erosion (ASTM E-859) Found = 0.018 gm/ft! (Allowable limit = 0.025 gm/ ft!)
Standards Compliance
1. ASTM C-177 & C-518 Thermal Conductivity
2. ASTM E-119 Full Scale Fire Wall and Hose Stream Test
3. ANSI/UL 263 Fire Tests of Building Materials
4. BS 476 Part-4:1970 Non Combustible Test
5. ASTM C-423 Noise Reduction Coefficients
6. ASTM C-523 Light Reflectance
7. ASTM E-859 Air Erosion
8. ASTM E-736 Bond Strength
9. ASTM E-761 Compression Strength
10. ASTM C-1149 Substrate Bond Deflection
11. ASTM C-739 Moisture Absorption, Odor Emission and Smoldering Combustion
12. ASTM C-739a Corrosion
13. ASTM E-413-87 Airborne Sound Transmission
14. ASTM E-1042 Acoustical Absorption
15. ASTM E492-04 Standard Test Method for Laboratory - Measurement of Impact Sound Transmission Through FloorCeiling Assemblies using the tapping machine
16. ASTM E989-97 Standard Classification Impact isolation Class (IIC) rating
17. ASTM E-1007 Test Method for Field Measurement Impact Sound Transmission
18. ASTM E-1111 Inter-zone Attenuation of Ceiling Systems
19. ISO 140-3:1995 (E) Lab. Measurements of Airborne Sound Insulation in Buildings and Buildings elements
20. ISO 717-1:1996 (E) Rating of Sound Insulation in Buildings and Buildings elements
Building Insulation Treatment
Technical Specifications Guideline
TECHNICAL SPECIFICATIONS GUIDELINE
Acoustical Treatment - Ceilings
A. General Specifications
Ceiling – Acoustic Sound Reverberation Control materials (“Materials”) performances shall be proven with physical Test
Reports (conducted and) issued by Accredited independent Acoustic Laboratory with international recognition & approval, and
having facility and instrumentation in compliance with highest relevant ASTM standards.
Materials applied on any part of Ceiling and Metal decking shall be Non – Combustible construction materials in compliance
with British Standard (BS) 476 Part 4:1970 and shall be non-toxic and non-asbestos in compliance with US-EPA 40 CFR Part
248 and US Green Building Council.
Manufacturer of the Materials should be certified/registered to have in place Quality Control System in conformance to ISO
9002:1994 and Quality Management System in conformance to ISO 9001:2000.
Provides proven track record (project reference of no less than 10 years of equivalent jobs).
Noise Reduction Coefficient test reports shall meet and in compliance with ASTM C-423 with Standard Practices for Mounting
Test Specimens during Sound Absorption Test in compliance with ASTM E-795, and Thermal Conductivity value minimum of
0.04961 W/mºK at 25 mm thick in compliance with ASTM C-518 & C-177.
Bond Strength shall be greater than 600 psf as tested in compliance to ASTM E-736 with cohesive strength at time of
application no less than 700 grams. Compression strength shall exceed 400 psf as tested in compliance to ASTM E-761.
The materials shall be non-corrosive in conformance with UMB-80 with base materials shall not contain any phenol agents or
resins as used for binder in conventional insulations and/or copy product. Compliance of non-corrosion shall be tested in
compliance with ASTM C-739a, which must demonstrate no perforations for all kind of metal surfaces.
Materials shall be fungi resistance (with no fungi growth) as tested in compliance with ASTM C-739 with moisture vapor
absorption shall not exceed 1.3% weight gain, with no perceptible odor emission.
Materials should be a self – supporting system with allowable light – weight burden to the surface to be applied on. For
exposed area, Materials shall have choice of uniform and homogenous color for aesthetic values.
Materials and installations shall be warranted by Gingel International Limited or Gingel Corporation Limited.
B. Sound Absorption Target Performance
Roof & Wall Partitions - Acoustic Barrier
A. General Specifications
All Roof – Acoustic Barrier materials (“Materials”) performances shall be proven with physical Test Reports (conducted and)
issued by Accredited independent Acoustic Laboratory with international recognition / approval, and having facility and
instrumentation in compliance with highest relevant ASTM standards.
Materials used in any part of Roof Barrier shall be Non – Combustible construction materials in compliance with British
Standard (BS) 476 Part 4:1970 and shall be non-toxic and non-asbestos in compliance with US-EPA 40 CFR - Part 248 and
US Green Building Council.
Building Insulation Treatment
Technical Specifications Guideline
Manufacturer of the Materials should be certified/registered to have in place Quality Control System in conformance to ISO
9002:1994 and Quality Management System in conformance to ISO 9001:2000.
Provides proven track record (project reference of no less than 10 years of equivalent jobs).
The materials shall be non-corrosive in conformance with UMB-80 with base materials shall not contain any phenol agents or
resins as used for binder in conventional insulations and/or copy product. Compliance of non-corrosion shall be tested in
compliance with ASTM C-739a, which must demonstrate no perforations for all kind of metal surfaces.
Materials shall be fungi resistance (with no fungi growth) as tested in compliance with ASTM C-739 with moisture vapor
absorption shall not exceed 1.3% weight gain and no perceptible odor emission. And Thermal Conductivity value minimum of
0.04961 W/mºK at 25 mm thick in compliance with ASTM C-518 & C-177.
Sound Transmission Class (STC) test be conducted in compliance with ASTM E-90 with STC ratings determined in
compliance with ASTM E-413 (Re-approved 1996).
Impact Isolation Class (IIC) test reports shall be conducted in compliance with ASTM E-492 with IIC ratings determined in
compliance with ASTM E-989.
Materials and installations shall be warranted by Gingel International Limited or Gingel Corporation Limited.
B. STC Target Performance for Roofing System
C. STC Target Performance - Wall Partitions (Dry Wall) System
Designed System should achieve minimum STC 55 when 2.5” thick layer is applied and sandwiched with 2 layers of 5/8”
wall board on one side and 1 layer of 5/8” wall board on the opposite site. And the System should achieve minimum of STC
62 when a thin layer of advanced Acousti-Max CLP (that has achieved r IIC minimum of 19) is installed in between the 2
layers of 5/8” wall board.
Building Insulation Treatment
Partial Projects Reference
PARTIAL PROJECTS REFERENCE
Asia, Africa & Pacific
We have a very extensive project reference with proven track record over 50 years. This includes: Schools & Universities, Retail Stores,
Hotel & Resorts (includes Casinos), Theme Parks, Strategic & Technology Industries, Convention & Exhibition Centers, Churches &
Religious Centers, Hospitals, Entertainment Places, Sports' Centers, Plants & Warehouse Facilities, Airports & Cargo's Buildings, Water
treatment Plants, Oil & Energy Industry, Offices & Commercial Buildings, Homes and other special projects. For specific project
reference, please contact us.
1. Jakarta Hilton Convention Center, Indonesia
2. Seagate Hard Disk & Peripheral Factory, Tuas, Singapore
3. Suntec City International Convention Center, Singapore
4. Temasek 21st Century Campus Development , Singapore
5. Putra Jaya Convention Center, Kuala Lumpur, Malaysia
6. The Pyramid Club, Singapore
7. Pratumthani Stadium, Thailand
8. UTV International - Television Advertising Production Studio, Singapore
9. Hyundai Auto Center, Thailand
10. Taiwan University Hospital, Taipei, Taiwan
11. Telecom Building, Taipei, Taiwan
12. Bank of Thailand, Bangkok, Thailand
13. World Trade Center, Taipei, Taiwan
14. Da-An MRT Station, Taipei, Taiwan
15. CNB Camp, Singapore
16. National University - Auditorium, Arau, Perlis, Malaysia
17. Roman Catholic Church "St Mathias", Jakarta, Indonesia
18. Tokyo Entertainment Center, Tokyo, Japan
19. Isuzu Auto Centers, Thailand
20. Golden Cinema, Kuala Lumpur, Malaysia
21. Thai Lift Industry, Thailand
22. Penta Technology Co. Ltd., Bangkok, Thailand
23. Tokyo Disneyland, Tokyo, Japan
24. IMF Convention Center, Seoul, Korea
25. Vichaiyut Hospital, Thailand
26. Korea Stock Exchange, Seoul, Korea
27. Dow Chemical, Bangkok, Thailand
28. KLCC - Petronas (World's tallest tower) Retail Podium & Skylight Level, Kuala Lumpur, Malaysia
29. Regent Hotel, Bangkok, Thailand
30. National Concert Hall, Kuala Lumpur, Malaysia
31. "Dharmawangsa" - The Rosewood Hotel & Resorts, Jakarta, Indonesia
32. Dynasty Hotel, Thailand 33 Thai Olefins Center, Thailand
34. Thai Broadcasting Center, Bangkok, Thailand
35. RCTI Live Television Studio, Jakarta, Indonesia
36. St Joseph Institution, Art Museum, Singapore
37. Samsung - Thai, Thailand
38. FBT Sport Complex, Bangkok, Thailand
39. International Convention & Exhibition Center, Hong Kong
40. Wisma Kinasih, Bogor,Indonesia
41. International School, Bangkok, Thailand
42. Thammasat University, Thailand
43. Singapore Discovery Centre, Singapore
44. Dance Fever Theater, Bangkok, Thailand
45. Four Seasons (Regent) Luxurious Apartment, Jakarta, Indonesia
46. National Computer Board - Power Room, Singapore
47. Naval Science Dept., Thailand
48. Sahamongkol Film Production, Bangkok, Thailand
49. Sheraton Hotel, Hanoi, Vietnam
50. Sheraton Hotel, Jakarta, Indonesia
51. Channel-11 Studio, Bangkok, Thailand
52. Nan Yang Girls High School, Singapore
53. National University of Singapore (NUS) New Campus, Singapore
54. Thai Airways - Crew Training Center, Bangkok, Thailand
55. GO Recording Studio, Jakarta, Indonesia
56. American School, Singapore
57. Indosiar TV Studio, Jakarta, Indonesia
58. East Point Cinema Complex, Singapore
59. ANTV Studio, Jakarta, Indonesia
60. Swiss Embassy Apartment Building, Jakarta, Indonesia
61. United World College of South East Asia, New Campus, Singapore
62. German School, Singapore
63. SCTV Television Studio, Jakarta, Indonesia
64. Thai Community Center, Bangkok, Thailand
American School Gymnasium, Singapore.
La Salle - SIA Arts College, Singapore Auditorium.
Presbyterian Church, Jakarta - Indonesia.
Buddha Tooth Temple - Auditorium, Singapore.
This Multi Corporation conference room treated
with our FC Acoustic Finish.
Singapore Heritage Museum & Exhibition.
Building Insulation Treatment
Partial Projects Reference
65. Mall Convention Center, Bangkok, Thailand
66. CISCO indoor range, Singapore
67. Central Mall Cinemas, Singapore
68. Young Musicians Society, Singapore
69. Studio East - Hong Kong Movie Stars Club, Singapore
70. Balai Pustaka Negeri (National Library), Kuching, Sarawak, Malaysia
71. Istana, the Presidential Palace, Renovation Project, Singapore
72. The Brannigan's/The Brix - Hyatt Regency, Singapore
73. SAF - Military Base Camp, Pulau Tekong, Singapore
74. Paragon Redevelopment, Singapore
75. Singapore Technologies Auditorium, Singapore
76. American Club, Singapore
77. Sub-Ordinate Court, Singapore
78. Radio Pelita Kasih (Broadcasting Studio), Jakarta, Indonesia
79. One Raffles Link - Marina Square / Raffles City, Singapore
80. Luxury Vessel, Jaya Shipyard, Singapore
81. National Archive of Singapore (NAS), Singapore
82. Wong San's East Side - United Square, Singapore
83. MHA power and chiller plant, sector A - B, Singapore
84. Sime Darby Centre, Singapore
85. Ten Mile Junction, Singapore
86. ATS, Turbine Jet Engine Plant Center, Singapore
87. Tanglin Community Centre, Singapore
88. Army Camp, Malaysia
89. Singapore Exchange Centre, Singapore
90. GKI (Presbyterian Church), Samanhudi, Jakarta
91. GKI (Presbyterian Church), Pondok Indah, Jakarta, Indonesia
92. Gereja GKRI (Church), Karang Tengah, Jakarta
93. BPK Penabur Tirta Marta - School (Music Hall & -Studio) Pondok Indah, Jakarta, Indonesia
94. Gereja Kristus Jemaat (Christian Church), Jakarta, Indonesia
95. Persari Movie Production Studio, Indonesia
96. Peninsula Hotel - Renovation Project, Singapore
97. Jakarta International School (Indoor Tennis Court), Jakarta, Indonesia
98. Singapore Bible College, Singapore
99. People’s Association - Siglap Community Center, Singapore
100. Sport Hall and Auditorium, St Hilda School, Singapore
101. Theater of Dreams - Manchester United F.C. (U.K.), Singapore
102. The Red Chambers - PUB & Entertainment Centre, Singapore
103. Protestant Church, Ketapang, Jakarta, Indonesia
104. Roman Catholic Church, The Holy Family, Singapore
105. RHB Bank - Auditorium / Training Center, Malaysia
106. Putra Jaya, Parcel - D Project, Selangor, Malaysia
107. Bethany Graha, Phase-1, Surabaya, Indonesia
108. Temasek Polytechnic - 21st Century Campus Development Phase-2, Lecture Hall, Singapore
109. CBN - TV Studio, Jakarta, Indonesia
110. Singapore Press Holdings, Singapore
111. Sunter Movie & Television Production Studio, Jakarta, Indonesia
112. PT Timah Auditorium, Bangka, Indonesia
113. DSTA, Air Force, Paya Lebar, Singapore
114. Methodist Church, Singapore
115. Bright Vision Hospital, Singapore
116. Trans - TV Studio, Jakarta, Indonesia
117. New SCTV Studio, Jakarta, Indonesia
118. Sound Blaster Show Room, Creative Technology, Singapore
119. Harvest Church, Jakarta, Indonesia
120. Bukit Batok - PWD School, Singapore
121. Queensway Primary & Secondary School, Singapore
122. St Hilda Secondary School, Singapore
123. "Esplanade Theatres on the Bay", Singapore
124. Metro-TV Studio, Jakarta, Indonesia
125. LTA Project - MRT & LRT Central Station - Ponggol, Singapore
126. Carissa Park Condominium Project, Flora Road, Singapore
127. LATIVI Television Studio Phase-1, Jakarta, Indonesia
128. Anglo Chinese Junior College (ACJC), Dover Road, Singapore
129. Bukit Batok Secondary School (St 52), Singapore
130. Green Ridge Condominium Project, Singapore
131. Port of Singapore Authority Building, Singapore
132. Singapore Repertoire Theater, Singapore
133. LTA / MRT – Sengkang, North East Link & Kim Chuan, Singapore
134. MITA Head office, Singapore
135. Singapore Science Centre, Singapore
136. City TV Studio, Jakarta, Indonesia
137. Taruma Nagara University, Jakarta, Indonesia
138. Manhattan Discotheque, Borobudur Inter-Continental, Jakarta, Indonesia
139. Garden Remembrance, Christian Columbarium, Singapore
140. Victoria Junior College - Main Lecture Theater / Hall, Singapore
Singapore Environment Building - Cafe treated
with various special matching colors of FC
Acoustic.
Paya Lebar Methodist Church, Singapore.
La Salle - SIA Arts College, Singapore
- Multi Purpose Hall.
Food Court application - providing pleasant
indoor environment.
Red Scarlet Hotel, Singapore.
Queenstown Secondary School - Library,
Singapore.
Building Insulation Treatment
Partial Projects Reference
141. The Liquid Room - Pub & Music Hall, Singapore
142. The Salvation Army Head Quarter, Singapore
143. Ministry of Home Affairs - Sports Hall, Singapore
144. National Parks of Singapore, Singapore
145. Kawai Music Hall, Jakarta, Indonesia
146. Golden Crown Entertainment Center, Jakarta, Indonesia
147. The Furama Hotel - Ball Room, Singapore
148. Changi Naval Base, Singapore
149. UMS (University Malaysia Sabah) - Kota Kinabalu, Sabah, Malaysia
150. Dhaka Central Mosque, Dhaka Cantonment, Bangladesh
151. Ministry of Home Affairs, Cafetaria, Singapore
152. The Holy Spirit Catholic Church, Singapore
153. Metro TV - Phase 2, Jakarta, Indonesia
154. Catholic Junior College, Singapore
155. Sports Super Mall - Kelapa Gading, Jakarta, Indonesia
156. Centro Pub & Discotheque, Singapore & Jakarta, Indonesia
157. Singapore Naval Base, Singapore
158. Nan Yang Academy of Fine Arts, Singapore
159. Nan Yang Primary School, Singapore
160. Seagate Peripherals New Plant, Woodlands, Singapore
161. Double-O Entertainment Center, Singapore
162. Ministry of Environment Building, Singapore
163. The Merlion Tower Theater, Sentosa, Singapore
164. Institute of Technological Education (ITE) - Simei, Singapore
165. CIBA Vision Factory Plant, Singapore 166 Pidemco Building, Singapore
167. Singapore Management University (SMU) City Campus, Singapore
168. Royal Peacock Hotel, Singapore
169. Jurong Christian Church, Singapore
170. PUB Changi Water Reclamation Plant, Singapore.
171. Alam Warisan, Putra Jaya, Malaysia
172. Senayan Sport Complex - Improvement, Jakarta, Indonesia
173. Terminal-2 Changi International Airport, Singapore - Renovation Works
174. Republic Polytechnic, Woodlands, Singapore
175. National Assembly Building at Dodoma, Tanzania
176. Heritage History Museum, Singapore
177. Circle Lines - MRT Station, Singapore
178. Temasek Polytechnic, Cafeteria, Singapore
179. Pondok Indah Mall - Phase 2, Jakarta, Indonesia
180. Mega Bank, Jakarta, Indonesia
181. Balai Kartini, Jakarta, Indonesia
182. PRJ (Jakarta Expo) - Jakarta, Indonesia
183. Singapore Sports Complex, Singapore
184. Vivo City, World Trade Center, Singapore
185. Nan Yang Technological University, Singapore
186. Methodist School, Singapore
187. Dubai International Airport
188. Nan Yang Lobby & Auditorium, Singapore
189. Hewlett Packard - Central AHU, Singapore
190. Ang Mo Kio - Bus Interchange, Singapore
191. SineMart Movie Production, Jakarta, Indonesia
192. St James Power Station, Singapore
193. Mechanical Room - Anti condensation treatment, Singapore
194. Singapore Naval Base, Power Room, Singapore
195. Marina Executive Golf Club, Singapore
196. Main Sport Hall, Balikpapan, Indonesia
197. TV-7 Studio Extension Project, Jakarta, Indonesia
198. Pajajaran Shopping Mall, Cinemas - Studio, Bandung, Indonesia
199. National Heritage Board, Singapore
200. Red Scarlet Hotel, Singapore
201. BINUS School - Serpong, Jakarta, Indonesia
202. St. James Complex, World Trade Center, Singapore
203. KPK Building, Jakarta, Indonesia
204. Parliament (Congress) House, Singapore
205. Trans TV-7, News Room and Production Facility, Jakarta, Indonesia
206. Jatim (East Java) Expo Center, Indonesia
207. CC Production Studio, Jakarta, Indonesia
208. Proton Auto showroom & office, Kuala Lumpur
209. Lippo - Aryaduta Hotel, Grand Palladium Ballroom, Medan, Indonesia
210. Senayan City - Multifunction Hall, Jakarta, Indonesia
211. 211. Republic Polytechnic, Drama Theater, Singapore
212. Jakarta International Expo Extension (Hall - D)
213. Tisch School of Arts (at NYU), Singapore
214. La Salle - SIA College, Singapore
215. Grand Indonesia, Jakarta, Indonesia
216. DUN - Convention Center, Kuching, Sarawak
217. Police Academy, Semarang, Indonesia
218. Sukun Cigarette Plant, Indonesia
Nan Yang Arts Poly Podium, Singapore.
Philips Factory - Cafeteria.
Our product eliminate Impact Noise and reduce in-room
sound reverberation, while enhancing interior looks and
indoor lighting of this Toyota Expo Hall.
Nan Yang Technological University Foyer,
Singapore.
Samsung Corporate HQ, Seoul, Korea.
This MRT Circle Line project, and many other
MRT Stations in Singapore were treated with
Cell-Spray Black to provide pleasant interior
sound control and saving building energy
consumption.
Building Insulation Treatment
Partial Projects Reference
219. Calvary Church, Kuala Lumpur, Malaysia
220. Changi Airport Terminal 3, SIA's Silver Kris Flyer - Lobby, Singapore
221. Denso Plant, Malaysia
222. Samsung Corporate Head Quarter, Seoul, Korea
223. Maxi Building, Kuala Lumpur, Malaysia
224. Tech Expansion, Woodland Industrial Park, Singapore
225. TV Nusantara, Jakarta, Indonesia
226. Sports Stadium Complex, Samarinda, Indonesia
227. Calvary Church, Kuala Lumpur, Malaysia
228. National Archives, Singapore
229. Waterloo Entertainment Hub, Singapore
230. Ssangyong Plaza Indonesia, Jakarta, Indonesia
231. Terminal-3 Jakarta Int'l Airport, Jakarta, Indonesia
232. Marina Barrage, Singapore
233. Trinity Church, Singapore
234. Harley Davidson's Showroom, Semarang, Indonesia
235. Singapore Girl's Home, Singapore
236. Singapore Arts School, Singapore
237. Orchard Central Bldg., Singapore
238. Choa Chu Kang Community Centre, Singapore
239. First Media Down Town & Studio, Lippo Jakarta, Indonesia
240. Safari Garden Bali, Indonesia
241. Trans Kalla Mega Mall & Entertainment, Ujung Pandang, Indonesia
242. TV-12 Recording Studio, Singapore
243. Indoor Sport Halls, Singapore
244. Art Gallery, Singapore
245. Indosiar New TV Studio & Movie Production, Jakarta, Indonesia
246. Art Institute of Indonesia, Jogyakarta, Indonesia
247. Jurong Bus Interchange & Mixed Development, Singapore
248. Hollandse School, Singapore
249. Fusion World, Singapore
250. Liang Court Discotheque, Singapore
251. Trans Kalla Studio, Entertainment, Makassar, Indonesia
252. Jurong Mixed Development & Bus Interchange, Jurong, Singapore
253. Singapore Arts School, Singapore
254. Hardrock Hotel, Sentosa Resort World, Singapore
255. Grand Kartini, Jakarta, Indonesia
256. Church of Holy Trinity, Pasir Ris, Singapore
257. Casino Royale Bar, Sentosa Resort World, Singapore
258. Yishun Hospital, Singapore
259. Universal Studio Tour, Sentosa Resort World, Singapore
260. Clementi Mixed Development & Bus Interchange, Jurong, Singapore
261. United World College Campus, Tampines, Singapore
262. Australian International School, Singapore
263. Energy Centre, Marina South Garden, Singapore
264. Singapore Art Museum, National Heritage Board, Singapore
265. Conservatory Complex, Marina South Garden by the Bay, Singapore
266. Divine Mercy Church - Singapore
267. Festive Hotel, Sentosa, Singapore
268. Serangoon Bus Interchange, Singapore
269. Maritime X-perimental Museum, Singapore
270. Hard Rock Cafe, Sentosa Resort World, Singapore
271. ITE College West, Singapore
272. Marina Bay Sands - Integrated Resort, Theater 1 & 2, Singapore And many others ...
Marina Bay Sands - Casino Resort &
Convention Center - Theater 1 & 2 were treated
with our product for indoor acoustical
performances.
The entire walls and metal roofing of this new
Mega Mall in Makassar were treated with CellSpray for rain impact noise and indoor sound
reverberation.
Divine Mercy Church, Singapore. This Church's
Ceiling was treated with FC White for much
needed reduction of noise reverberation and
interior aesthetic values.
Hard Rock Cafe Hotel in Singapore and its
facility were treated with Cell-Spray to eliminate
sound transmission and create pleasant interior
sound environment.
We are proud to participate once again in the development of Universal
Studio Tours, this time in Singapore. Our product has always been used
to create ideal interior sound environment both for making movies and
Studio Tour, including sound effects at Movie Production Studios.
The largest Theme Park in East Indonesia were treated with our product to
eliminate impact noise through its metal roofing while reducing indoor
sound reverberation to provide pleasant indoor environment for its visitors.
Building Insulation Treatment
General Information & Warranty
General Information & warranty
Our advanced fiber product is simply and truly the most innovative fiber (and its derivative) product in the world. Our continuous
research & development in fiber technology leading the invention of new high end fiber product(s) and component(s) that form
proprietary system. Our range of products includes various fibers with excellent acoustical and thermal treatment for home, commercial
and industrial buildings. It is an economical and efficient multi-function insulation with fast-track application for building’s treatment to
achieve quiet and pleasant environment while saving energy consumption with healthy and safety building’s environment that comes
with one-hour fire endurance. Our proprietary treatment systems provide architects, designers and builders with an infinite range of
options in controlling sound energy and lighting on walls and ceilings. Utilizing "state of the art" technology in production, we present the
finest fiber products that combined with our proprietary components form installed product with excellent and unmatched performances,
both acoustical and thermal values. The use of our proprietary components make it possible to create exceptional performances in
various type of applications, such as for Sound Transmission and Impact Noise treatment, as well as for noise reverberation treatment
and building's thermal control, with highest ratings and approvals in the Industry. Our products had been rigorously tested by various
internationally recognized independent laboratories in comprehensive fields and obtain various certifications/approvals from international
standards' institutions; the most in its industry (Our product has been tested extensively and rigorously in North America, Europe and
Asia). Our engineering team and advanced facilities allow us to continuously develop and test new product and treatment system. These
factors enabling us to perform design and build scope of work with proven performance that save project's cost while accelerating
project's completion and providing performance surety to our clients.
Product Limitation
As most building materials, our products should not be used in areas where there is prolonged exposure to water nor should it be
applied or installed in areas with excessive exposure to extreme heat or fire and where combustible materials such as: heavy dust, oil
mist/drip, resins or dusts, wood, metal sanding & grinding particles, outer layer of gypsum board or other flammable substance exist,
which may create fire hazard and will burn if set on fire from ignition source such as spill over from hot works. If ignited, these
contaminants will burn until consumed and can spread the fire to other building materials. Strict industrial maintenance procedure to
control this from happening must be employed. This is very important during the execution of hot works (such as steel cutting or
grinding) whereby extreme heat molten metal (exceeding 2000ºF) will spill over. Building materials, including Thermal and Acoustical
insulation, should be protected by a wainscoting or blankets (as recommended and approved per ASTM and NFPA standards) in areas
where severe or direct contact with ignition source (such as hot works) and combustible materials (as stated above) presence
reasonably anticipated. All these conditions may be detrimental and will deform the applied product(s), while accumulation of unwanted
contaminants may become hazardous. Our products are solely intended for building's thermal and acoustical treatment with its fire
ratings provided as additional benefits to users. Our spray applied product require curing process of 4 - 6 weeks.
Special Precautions
Application of product on certain type of surface may need preparation (sealing and priming) prior to application. This publication
supercedes content of any previous publications issued through December 31, 2008.
* For detail information on limitations and precautions, please refer to our warning bulletins or contact our applicator.
** Limitations, Warranty and other terms and conditions are updated from time to time. And the terms and limitations are subject to
change without notice. Please check our internet web site regularly for updates.
WARRANTY
Gingel, we warrant the insulation products to be free from defects in materials and workmanship at time of
shipment. Installation/application warranty is provided by our local sales offices and/or authorized applicators.
Supply & install to end-users are provided through our local sales offices and authorized distributors &
applicators only. All installations/applications shall only utilize our special licensed equipment. Some handy
installation product may be self-installed by end-users on their own risks. It is the sole responsibility of the enduser (customer) to determine compliance of the product with local building codes and other regulatory bodies.
Installation/application and worker’s compensation insurance are the responsibility of local installer.
We herein publishing information and data based on generic tests and information available in selective public
domain. We believe these data is as reliable as present “state of the art’ data in fire, thermal and acoustical, and
can be used only as a guide for design. Tests results are in compliance with highest degree of appropriate
standards and are conducted by internationally recognized independent laboratory utilizing “state of the art”
facility, techniques and instrumentations. We are not responsible for building design, appearance and/or
workmanship, and make no guarantee of performance of the building’s integrated system. The integrity of
backing layer of spray applied product is not covered by our warranty in anyway.
We specifically disclaim any warranty of merchantability or fitness for a particular purpose. In no event shall
Gingel and the management & employees be liable for special, indirect or consequential damage. We reserve
the right to choose its applicator and to produce and/or fabricate its products partially or wholly in any
designated plant/location as they see fit. Please contact us to reconfirm validity of authorization and/or license
of your local applicator.
Building Insulation Treatment
Email: [email protected] . www.gingel.com