See the full range

Transcription

See the full range

Edging, workshop,
accessories
Equipments Catalogue
BriotGB_FC00676_ind04_mars2014.indd 1
24/03/2014 15:21:32
contents
Alta line
page
8
10
11
12
7
Compact system
page
19
Workshop
page
27
Accessories
page
35
13
14
15
16
18
ALTA ZD
ALTA Z
ALTA PULSE
ALTA NX
ALTA XLD
ALTA XS
BRIOT LINK
LAB CONNECT
OPTITAB
20
21
22
23
eMOTION
eXPRESSION
eMOTION m
SCANFORM NET3
28
29
29
30
30
31
31
32
32
33
34
REX 3000.1/ REX 3000.2
AG5
COLUMN DRILL
DM3 DRILL
OPTICUS RIVEX 50
MAGA
VAVA
A2100
TO48
SONOREX
FILTRATION UNITS
36
38
40
41
44
46
48
50
52
55
EYE PAD / ECO PAD
ALTA MEULEUSES
eMOTION / eXPRESSION
SILVER + / SILVER
ALTA XL/XLD
ALTA XS
AXCELL
ACCURA CL / LAB
ACCURA CX / PRO
WORKSHOP ACCESSORIES
3
24/03/2014 15:21:36
index
ALTA Zd - PAGE 8
ALTA Z -PAGE 10
ALTA Pulse - PAGE 11
la connexion
ALTA XLd - PAGE 14
OPTITAB PAGE 18
eMOTION m - PAGE 22
ALTA XS - PAGE 15
eMOTION
BRIOT LINK -PAGE 15
- PAGE 21
ALTA NX
- PAGE 12
LabConnect
LAB CONNECT- PAGE 16
eXpression - PAGE 21
SCANFORM NET 3 - PAGE 26
4
24/03/2014 15:22:17
16
REX 3000.1- PAGE 30
COLUMN DRILL - PAGE 31
MAGA - PAGE 33
SONOREX- PAGE 35
REX 3000.2--PAGE 30
AG5- PAGE 31
OPTICUS RIVEX - PAGE 32
DM3 DRILL - PAGE 32
VAVA - PAGE 33
FILTRATION- PAGE 6
A2100 - PAGE 34
T048 - PAGE 34
ACCESSORIES - PAGE 37
24/03/2014 15:22:35
High End technology accessible to all.
What makes Briot proposition so unique is to provide high
end technology accessible for each category of customer.
The new edger eMOTION features high end technology for
simplicity of use and accessibility.
This new edger has been specially developed for Briot
mid range targeting customers looking for high quality job,
achievable with a very simple-to-use machine.
www.briot.com
24/03/2014 15:22:36
Alta line
8
10
11
12
13
ALTA ZD
ALTA Z
ALTA PULSE
ALTA NX
ALTA XLD
14
15
16
18
ALTA XS
BRIOT LINK
LAB CONNECT
OPTITAB
24/03/2014 15:22:37
Alta Line
Alta Zd
Intelligent design for innovative minds
REF BKCTWXBWX ALL MATERIALS
REF BKCHWXBWX ALL PLASTICS
The innovative Alta Zd, the newest edger from Briot, comes equipped
with capabilities that aim to make daily work easier and more
effective.
This edger is made for achieving the highest productivity as it is
positioned as the fastest retail edger on the market, and meets every
requirement for high end edging in today’s industry.
Creativity
The multiple tool arm features extraordinary stability, inclinable for angles
between 0 and 30 degrees, and now boasts a small finishing wheel
designed to process the most extravagant shapes while reducing the use of
the drill/mill tool while performing this action. The Sd Technology is unique in
the optical market and breaks down barriers when it comes to complicated
frame designs.
• Sd Technology for extravagant and custom shapes
• Small finishing wheel allows multiple possibilities for design.
The capability to assign individual angles to drill holes makes the mounting
of any rimless frame simple without creating tension. Prior to setting a
groove on a lens, the Alta Zd determines curvature and the optimal angle
for that lens to come out perfect even in supra high curved frames.
The safety bevel is individually able to be configured for both the front and
the back and features the capability to polish.
• Drilling with a variable tilt from 0° to 30°
• Inclined Grooving according to the lens curvature
• Polished Safety Beveling
Technical Specifications
Flexibility
Alta Zd determines the best bevels using the 90 mm diameter small edging
wheel. The mini bevel, also adjustable in height, leads to perfect fit and
aesthetics when glazing for metal frames. The positioning of the bevel can
be chosen easily by program, or manually. Together with the tilted bevel,
edging for wrap frames is fast and easy.
The Alta Zd provides all the tools you need for picture perfect finishing.
General
• 4 different Bevels including a Mini Bevel
• Special Bevel ensures best fit for Wrap Frames
• Multiple Programs ensure accuracy
and aesthetically best fit
Height
570 mm
Width
510 mm
Depth
615 mm
Weight
77 Kg
Voltage
230 V - 240 V / 50 Hz -60 Hz
The fully versatile Alta Zd adapts to your individual requirements. With its
partial processing function, you will experience easily produced perfect
glazing for Supra frames. Zd also offers the combination of a groove
together with a V-Bevel. With its’ accuracy, speed, and precision within
1/100 th of a millimeter, the Alta Zd offers outstanding result.
• Partial processing of V-Bevel, Rimless, and Groove
• Delivers Highest Accuracy in finishing
(1/100 th of a millimeter)
www.briot-altazd.com
8
24/03/2014 15:22:54
Alta Line
Productivity
With its history of sound technological choices,nBriot’s new Alta Zd
combines new features with exceptional reliability. The integrated high
speed motor ensures the higest level of productivity and speed never
before seen in a retail edger. The high resolution touch screen guides the
user through an easy interface process specially designed with ergonomic
workflow making the optician’s job simple and reducing the risk of operation
error.
• Easy to use touch screen interface
• High speed motor for the fastest edging available
• 4 cycles per material for special coatings and lens characteristics
Sd - Smart Design Technology
The Sd Technology is a unique concept in processing shapes with complex
contours. The shape is captured with the pattern recognition system on
Alta XLd. The contour of the shape is captured regardless of the processing
being performed by either the finishing wheel, or the drill bit. In the past,
what had to be designed with drill holes or slots is now defined by the
centering device. The frame, digitalized in Bezier Shape Data, can be
transferred directly to the Alta Zd. The edger automatically determines
which tools to use to customize the desired pattern.
After finishing the shape, the small finishing wheel is used to make the entire
contour smooth and seamless. With very few steps, it’s now possible to
edge the most complex shape patterns with ease and precision.
Step Bevel with Briot
More and more plastic Frames show a U- rather than a V-Bevel profile. On
High Wrap Frames a U-Profile leads to a better hold of the lens inside the
frame.
The new Step Bevel Process in Briot / WECO Edger enables glazing of
high wrap frames with a U-Profile. With a special processing program the
Edger is able to produce a Step Bevel with variable values for:
Step Width: Step Height: a: 1 .. 3mm
b: 1 .. 2,5mm
In addition to that the front sided safety
bevel can be chosen
Front Side Chamfering: f:.. 0,6mm
The 15° Tilt of the Step makes the step
bevel process unique in retail edging and
fulfils the requirements of a perfect Wrap
Frames’ Glazing.
Sport Frames which show an asymmetric profile, can only be produced
perfectly with a Step Bevel:
• Fast and reliable capturing of complex shapes
• Use of small finishing wheel reduces the use of the drill bit
• Seamless Contouring.
THE KEY FEATURES OF
ALTA Zd
Normal V-Bevel
Tilted Bevel
Step Bevel
• Multiple Bevel options
• Customized Grooving
• Individual Safety Bevelling
• Tilted Bevel for High Curve Frames
• Partial Processing
• Sd Technology
Step Bevel
9
24/03/2014 15:23:12
Alta Line
Alta Z
The market fastest edger for opticians
REF. BPCTWXBWX ALL MATERIALS
REF. BPCHWXBWX ALL PLASTICS
Alta Z is the perfect, environmentally-friendly solution for the
opticians’ workshop, providing a fast and accurate service for
new lens materials and frame designs.
Increased Productivity
New motorization has been developed to optimize the edging algorithms,
resulting in up to 43% faster operation and significantly increased
productivity.
TBS (Tilted Bevel System)
ALTA Z integrates a new wheel dedicated to high curvature lenses. The
wheel allows you to change the angle of the bevel to match the frame
groove angle, and to adjust the back facet up to 3 mm.
New Reduced Water Consumption
Water consumption has been considerably reduced: 5 liters for an edged
lens versus 16 liters on average with previous models. ALTA Z is part
of a new effort to market products which are environmentally friendly.
Variable Mini bevel
The height of the bevel is variable in order to realise a very high level of
aesthetics specially on metal frame jobs.
Technical specifications
HD drilling
Indispensable complement for the delicate jobs whose drill holes
are visible and must thus be perfectly aesthetic.
General
Absolute flexibility combining finishings
Associated functions in a same process: drilling and grooving
or drilling and bevel. Combination of Groove and Bevel, Rimless and
Bevel, Thinner and Thicker Groove.
Available in 2 versions
• Mineral version Five 90 mm (3.5 in) edging wheels:
all plastics (CR 39, polycarbonate, Trivex™, high index), mineral wheel,
bevel and rimless finishing, rimless polishing, TBS wheel.
• All plastics version Four 90 mm (3.5 in) edging wheels:
all plastics (CR 39, polycarbonate, Trivex™, high index), bevel and
rimless finishing, bevel and rimless polishing, TBS wheel.
Height
570 mm
Width
510 mm
Depth
615 mm
Weight
77 Kg
Voltage
230 V - 240 V / 50 Hz - 60 Hz
THE Key features of
ALTA Z
• Significant increase in productivity
• Exclusive range of features: no need to send out difficult jobs.
• Superior quality of finishes for a high-end result.
• Customizable settings for the jobs you process most often.
• Decreased water consumption.
• Briot LinkTM remote servicing.
Alta Z facing competitors.
Basic bevelled job
CR39 -0.25 Diam 65
Automatic bevel.
Alta Z
Supra job
Polycarbonate sph -4.00 diam. 75
Groove - Polish - Safety bevel.
Alta Z
Rimless job
Rimless job polycarbonate sph -4.00 diam. 75
3 holes + 1 notch-Polish-Safety bevel.
Alta Z
50% FASTER
34% FASTER
32% FASTER
10
24/03/2014 15:23:23
Alta Line
Alta Pulse
The heart of your workshop
REF. OABTWXBXXX ALL MATERIALS
REF. OABHWXBXXX ALL PLASTICS
Always attentive to market expectations, Briot has developed
new solutions and configurations for the existing Alta family. Alta
Pulse not only offers many functionalities to meet today’s needs,
but is also the result of continuous improvements, creating the
most stable and durable device with consistently
high edging quality.
Flexibility
You can expect it all from Alta Pulse: it makes the best finishing, drilling,
grooving and safety beveling, and it has a special bevel for curved shapes.
It is fully versatile and can adapt to individual requirements.
• Variable Mini-Bevel
• Tilted Bevel System
• Drilling in Angle
• Inclined Grooving
• Flexible Safety Beveling
Reliability
Tilted bevel system
Alta Pulse combines new features and new configurations with the simplicity
and multi-functionality that have made Alta such a success.
• Unique edging concept based on small 90mm edging wheels
• Strong and precise lens measurement
• Easy-to-learn human interface
Back facet
adjustment
1,4 mm
Best fit angle
0,8 mm
Thanks to its history and to sound technological choices, Alta Pulse combines
all of these new features with exceptional reliability.
• Processing of all types of materials
• Four cycles per material for secure edging
• High finishing accuracy: 1/100mm
60°
From 0,8 to 3 mm
Stability
45°
15°
5 mm maximum
Available in 2 versions
• Mineral version Five 90 mm (3.5 in) edging wheels:
all plastics (CR 39, polycarbonate, Trivex™, high index), mineral wheel,
bevel and rimless finishing, rimless polishing, TBS wheel.
• All plastics version Four 90 mm (3.5 in) edging wheels:
all plastics (CR 39, polycarbonate, Trivex™, high index), bevel and rimless
finishing, bevel and rimless polishing, TBS wheel.
THE Key features of
ALTA PULSE
• Ergonomical Workflow
• Absolute Flexibility in Beveling
• Versatile in Finishing
• Small Footprint
General
Height
570 mm
Width
510 mm
Depth
615 mm
Weight
69 Kg
Voltage
115 V - 240 V / 50 Hz - 60 Hz
11
24/03/2014 15:23:25
Alta Line
Alta NX
Perfection for your customers
REF OABAWXBXXX
Alta NX can undertake most common types of jobs, even the
most difficult, as drilling and grooving ones.
Associated with the ALTA XL centering device, you save
a lot of valuable time and realise any job with flexibility.
The ultimate in finishing quality
The Alta NX pushes back the limits of lens edging while optimising your
time. It allows you to undertake more delicate work: it is at last possible
to undertake drilled jobs.
“Autofocus“ Bevel
To personalise and get the most out of your job, you have the choice of four
completely automatic bevels which take the lens characteristics and the
tracing data fully into account.
“Finesse“ Safety-bevel
This option gives you surgical precision on the internal and external faces
of any lens thickness.
“Millimétrique“ Drilling
An entirely new design allows the drilling unit to work at any angle from
0° to 30° with an accuracy of 0,1 mm. The lens fi ts the frame instantly.
“Concordance“ Grooving
The inclined groove is placed automatically according to the curvature
and the thickness of the lens.
“Diamant“ Polish
Absolute transparency and sparkle, to add to the elegance of your
assemblies Mini bevel To realise a bevel with a predefined width.
Top class refinement
The Alta NX stands out by its completely original design and its refined style.
The edging room is transparent and pleasantly lit by white diodes:
you work in a calm atmosphere, which helps your concentration.
Let yourself go!
The innovation ergonomics of the Alta NX offer you new visual and tactile
sensations. The 3D pictograms have been carefully designed for ease
of use so you will navigate with complete ease.
An ideal interface
Ultra-legible icons show you the lens exactly as it is after fi nishing,
and to guide you throughout the edging process, messages provide
you with advice and draw your attention to errors or key points.
Productivity increases
With the new edger version, Your productivity
increases by more than 15 % against «All-in-One» Models depending on lenses types.
General
Height
570 mm
Width
510 mm
Depth
615 mm
Weight
69 Kg
Voltage
115 V - 240 V / 50 Hz - 60 Hz
THE KEY FEATURES OF
ALTA NX
• Takes up little space.
• Produces very high quality finishes.
• Gives your work real added-value.
• Enables you to undertake the most complex tasks
very simply.
• You always have the option to intervene,
even though its functions are automatic.
• Edger available with or without drilling.
12
24/03/2014 15:23:28
Alta Line
Alta XLd
Intelligent design for innovative minds
REF BCCBWXXX
In association with the edger ALTA Zd, the centering device
ALTA XLd optimises your time spent in the workshop.
You realise all your assemblies with an extreme flexibility.
4 Dimensions frame tracing delivers precise fit
The Scanform™ measures for each eye the shape of the frame
in 4 dimensions (size, shape, curvature, thickness) and ensures precise lens
fit inside the frame.
PROS: Automatic Drill Hole Placement
Rimless demo lenses and patterns are instantly recognized by Briot’s PROS
imaging system, which shows the exact placement of drill holes on the
Alta’s colours touch screen. The shape, type of lens, axis and optical center
and drill coordinates are all ,displayed, and adjustments can be made using
simple screen controls.
A 2048 jobs memory stores lens shapes and drill coordinates.
DIGIFORM: Custom made rimless lenses
Digiform function enables you to modify rimless lens shapes to meet
the cosmetic and lifestyle needs of your patients. You can extend, increase
or change any parameter easily and quickly.
An image of the lens shape appears on the Alta’s touch screen, where
shape modifications can be made before the lens is finished. You can easily
adapt progressive lenses.
Automatic centering and blocking
The Alta reads lens power without a lensmeter, and detects the bifocal
near-vision segment and progressive lens marking automatically, reducing
the time needed. The block is applied automatically using magnetic blocks.
Plus, Alta automatically identifies the optimum block size.
General
Height
685 mm
Width
320 mm
Depth
600 mm
Weight
36 Kg
Voltage
115 V - 240 V / 50 Hz - 60 Hz
THE Key features of
Alta XLd
• Reduced Space combining Tracing and Centring
• Automatic Centering and Blocking increases reliability
• Power Measurement on Single Vision Lenses
• Smart Design Technology for Complex Shapes
Sd - Smart Design Technology
The Sd Technology is a unique concept in processing shapes with complex
contours. The shape is captured with the pattern recognition system on
Alta XLd. The contour of the shape is captured regardless of the processing
being performed by either the finishing wheel, or the drill bit. In the past,
what had to be designed with drill holes or slots is now defined by the
centering device. The frame, digitalized in Bezier Shape Data, can be
transferred directly to the Alta Zd.
13
24/03/2014 15:23:28
Alta Line
Alta XS
Focusing on the essential
REF BAABWXAX
The speed of centring and blocking of the Alta XS
is perfectly adapted to high amount of jobs.
Associated with the Alta NX edger it delivers all of the
essential functions needed to produce high quality lenses
with unsurpassed reliability and ease of use.
Comfort and ease of use
Briot has designed the Alta XS layout/ blocking system with attention
to even the smallest details, making it a pleasure to use. An ergonomic,
antifatigue “soft touch” hand rest has been included to ensure maximum
comfort: your hand is naturally positioned for precise, faster centering.
Magic Green
Lens illumination adjusts itself automatically according to the shape
of the lens and the external lighting, ensuring maximum centering accuracy.
Operator interface
A large high-resolution touch screen gives quick access to all system
functions. Pictograms are easy to understand.
Optical system
The high accuracy of the optical system, together with the screen zoom
function, makes precise centering simple. The video system
refreshes frequently which guarantees a stable and fluid image.
Trends
The system is adaptable for both current and future frame designs.
Two shape recording methods are available:
- The Scanform™ tracing unit for traditional frames. Shape capture
and analysis of frame dimensions. Possible re-positionning of frame
in case of high difference between the 2 eyes (shape size or axis).
- Briot’s exclusive imaging software PROS™ for grooved and drilled frames.
Automatic recognition of the shape and position of holes.
Library
Use of the data base (2048 patterns and 512 jobs) is easy and instantaneous.
The increasingly wide choice of frames available has made this innovative
and effective system essential. Frames most frequently sold by the store
are grouped in a top 20.
General
Customization
DIGIFORM function, a Briot innovation, is integrated into the Alta XS.
It allows adjustment of the circumference, height and width of shapes
so that you can modify progressive lenses in the best possible way.
Height
570 mm
Width
290 mm
Depth
500 mm
Weight
24 Kg
Voltage
115 V - 240 V / 50 Hz - 60 Hz
THE Key features of
Alta XS
• Maximum comfort in use.
• 2 shape recording methods.
• Shape modification.
• Shape library.
• Simple, comprehensive high definition operator
interface.
• Easy to use by operators at all experience levels.
• Digiform function.
Magic green
14
24/03/2014 15:23:35
Workshop
Remote
Access
BRIOT LINK™
Remote access service and maintenance software,
the best performance out of your machine.
The use/installation of this state-of-the art technology,
another milestone in our industry, is transparent
to your lab. Briot Link™ allows you to concentrate
and focus on your customers while getting the best
performance out of your machine.
la connexion
Exclusive technology “machine to machine”
Briot Link™ enables you to make the most of your preventative
maintenance program and the management of your lab.
Your peace of mind is our priority.
Briot Link™ active monitoring of your edger
As soon as your edger is connected, it detects a malfunction
or even a slight deviance from default settings, Briot Link™
will warn us and help us adjust the settings before they become
a problem. Briot Link™ ensures the best performance via preventative
maintenance.
Once an alert has been received, one of our highly trained technicians
analyzes the data and suggests a course of action.
You don’t have to stop using your system. Your virtual technician
is there with you all the time.
Work with reassurance to increase your productivity.
Our technicians suggest a course of action either remotely
or by dispatching your field service tech based on the information / data
collected from your system. This cuts down on response times,
and by predetermining the specific needs, increases the productivity
and efficiency of field service.
THE Key features of
BRIOT LINKTM
• Run
your equipment with the optimum settings - always.
• Run your lab at the highest productivity.
• Maximize your customer service and profits
by reducing downtime.
• Get software upgrades instantly, no more waiting
for a service technician to come to your office.
• Make the most out of your service technician’s time.
• Get an edge and increase your profits.
15
24/03/2014 15:23:39
Tracerconnection
Retail
LabConnect
The way to be connected
LabConnect offers two features which will make the life of an
optician easier and more effective. Bundling of all required data
for a complete job from refraction to edging and Connection to a
lens manufacturer for remote tracing or lens optimization.
Bundling of data
A network in the optical business is getting more
important since the number of captured data is increasing by the
amount of digital devices. To reduce risks in sharing the valuable
data between the different stations, like optometry,
video centering and edging,
LabConnect stores all data in one computer for
further use. Every client is able to recall all data which is important for
the next processing step.
Following connections are available
Into LabConnect
> Visionix Lensmeter (e.g. VX40
> Visionix ARK (e.g. L78)
> Visionix Automatic Phoropter (e.g. VX55)
> Video Centering Device (e.g. Optiset)
> Briot Tracer (e.g. Alta XLd)
Out of LabConnect
> Visionix Automatic Phoropter (e.g. VX55)
> Briot Centering and Blocking Device (e.g. Alta XLd)
> Briot Edger (e.g. Alta Zd)
> Lens Ordering System
Customer & frame data base
LabConnect offers a customer database and an internal frame
database.
Both can be combined to create a job to be processed.
All data corresponding to one customer are recorded under customer
data base.
The Frame database includes standard shapes that are built in the
LabConnect. In case the required shape is available no further tracing
is needed for the lens geometry calculation.
Frame Data base
16
24/03/2014 15:23:59
Workshop
Retail
connection
Connection to lenses manufacturers
LabConnect offers a direct connection to lens manufacturers catalogues. It is possible to order lenses directly via this
interface in case the lens manufacturer is included in the
database.
The user can decide whether a lens should be edged remotely
or just calculated according to the selected shape.
There is also the option to share information to other lens
manufacturers.
Key points:
> Perfect overview of all steps of refraction
> Less errors due to direct link between different devices
> Huge Customer / Job and Frame Database
> Direct connection to Lens Manufacturers
Product Specifications and requirements:
> Operation System: Windows ® XP / 7 / 8
> Hardware: Pentium 4 and higher (256 MB RAM or higher)
> Supports up to 8 clients. The communication runs over
serial ports which have to be provided by the PC / Laptop
(USB to Serial
Convertors can be used)
> Supports all Briot Equipment of the actual range
> Supports all Weco Equipment of the actual range
> Supports all Visionix Equipment of the actual top range
> Supports the Optiset Video Centering Device
Connection to lenses manufacturers
17
24/03/2014 15:24:17
Retail
Connection
Alta Line
OptiTab
Perfect front desk assistance.
OptiTab offers multiple very useful functionalities beside the
measurement of centration values. The Frame Selection and
the Augmented Reality, which helps to show the «invisible»
are just two of the tools that will support the Optician day by
day.
OptiTab Measurement
With the one and only EY-Stick Technology finally all
needed data are taken by just one shot:
> Pupilar Distances for Far and Near Vision in Reference
to the Frame
> Pupilar Height in Reference to the Frame
> Pantoscopic Tilt
> Frame Wrap
> Rear-Vertex Distance
Additional benefits
> The Lens Package
Choose lens out of preloaded database
Find the perfect lens layout that fits
> The Lens Thickness
Review Thickness over Refractive Index
Job Database
Create a Job Database with Name / JobID. Results can be printed or
uploaded to additional managment software (e.g. LabConnect)
Lens Demonstration Tool
Tool for Augmented Reality
This tool helps the Optician to explain the mostly
Invisible! Every Menu includes many options to
compare, test, show
An easy to use Tool to demonstrate differences between Designs.
> Use the camera to take Live Views to explain
differences in lenses
> Explain Individuality easily
> Choose different lens designs
> Select different Surroundings
> Perfect Tool for Front Desk
> Show Anti Reflection Coating
> Show differences for Photochromatic
> Show advantage of High Index
> Show Polarization Effect
> Show Individual Designs
> Show the Difference of Tinted Lenses
Communication
The Communication to our Edging Systems can be handled via
> Barcode Printing via Pre-installed Printer Driver : barcode Delivers
Decentration Data only
> Communication via LabConnect via Webservice (Cloud) : Webservice
Communication can handle all data
Frame selection tool
Perfect Help for Customers Choice. Optician
can take up to 4 photos, in good quality that the customer can review
or send per Email.
KEY FEATURES of
OptiTab
• Handy, easy to use Instrument, perfect for Front Desk!
• One Shot, very precise and reproducible Measurement
• High Level Tool together with iPad®
• Mobile Measurement System
• Lens Supplier Independent
• Highest Output for less money
• Connectable to Weco, Briot and Visionix
Measurement in only one shot
18
24/03/2014 15:24:34
Compact
systems
20
21
22
23
eMOTION
eXpression
eMOTION m
SCANFORM NET 3
24/03/2014 15:24:35
Compact Systems
eMOTION
Be Simple, Be Professional, Be Motion
REF BBBAWZAZ
eMOTION, a combination of technologies providing all the necessary
functions for perfect glazing.
Allow yourself to be surprised by the simplicity of the interface,
and discover the ergonomic workflow.
Easiest ever: 4-in-1 Interface
Data input is made easy, thanks to the high-resolution touch screen.
All commands on the screen, display of both eyes at 1:1 scale,
command flow systematically the same regardless of the edging process,
and easy-to-understand icons for almost immediate learning.
Input zone
• Upgraded, patented Briot tracer.
•T
he multi-axis tracer precisely records the frame’s characteristics,
its shape and its curvature.
• Protective cover against dust and any water sprays.
• Input of metal and plastic frames, patterns and demonstration lenses.
• Easy positioning of the frame.
• Manual clamping to prevent any distortion of ultra-thin frames.
•G
entle frame realignment during clamping operation [Smooth Scan].
Frame thickness and groove position measuring in order to obtain
a flawless fit of the lens into the frame.
• Short cycle: 1 minute for both eyes.
• Memory: 300 jobs and 200 patterns.
Edging zone
• All types of materials (CR39, PC, Trivex, Hi-index, glass).
• Small edging wheels, 90 mm in diameter, ideal for high-curve frames.
• Superpolish edger.
• Grooving and drilling module (fixed 10° angle) for perfect finishing.
• Front and rear safety bevel.
• Specific edging cycle for superhydrophobic topcoatings:
No risk of axis slippage during any of the finishing phases.
• Bevel and rimless polishing.
Customisation and drilling zone
• Built-in Digiform lens shape modification software.
•E
asy to modify lens dimensions (A- or B-size separately, proportional, etc.)
• Drilling view screen.
•A
dd/delete and verify drilling holes
(by position coordinates or by displacement on the screen).
• Holes and notches, diameters from 1 to 6 mm.
• Up to 20 holes per lens.
Centering / blocking zone
• Parallax-free.
• Prism-free.
• Ergonomic.
• Easy to use with just one finger.
• Simplified blocking in 3 steps.
•E
asy block insertion –error-proof slot and visualisation of block position.
General
Width
728 mm
Depth
600 mm
Height
442 mm
Weight
75 Kg
Voltage
115 V - 240 V / 50 Hz - 60 Hz
THE Key features of
eMOTION
• eMOTION 1: Can be used as an OMA remote tracer.
• eMOTION 2: Custom jobs and personalised service
for your customers.
• eMOTION 3: Ergonomics of the blocking system
with pivot arm for easy block insertion,
smooth movement with return at end of blocking
for ease of manipulation.
• eMOTION 4: The edging zone comes with an array of
blinking LED lights to alert you when the edging cycle
is over.
Chronological steps
of the finishing process
Functionalities
related
to process step
Parameters related
to functionalities
20
24/03/2014 15:24:40
Compact Systems
eXpression
The easy way to create your business
REF BDBAWZBZ
With a comprehensive touch screen that easily navigates all
features, eXpression offers flexibility in processing, and delivers
high quality results. Shape Modification technology enables you to
customize any job. The specially designed eyepiece blocker allows
you to check lens size, and reduce parallax.
The tracing process
• Extreme Accuracy with Scanform 7
• Fast Tracing both Inside or Outside
• Large Job Database for up to 300 Jobs.
Shape administration
• Shape Modification for all dimensions
• Comparison Mode for original shape to modified shape
• Angle Modification
• Large 2D Shape Database up to 200 Shapes.
The finishing
• Large variety of different Bevel and Grooving options
• Manual Bevel / Groove Available
• Polishing for V and Flat Bevels
• Guided Groove with variable width and depth
• Front and Rear Safety Bevel.
General
Width
728 mm
Depth
600 mm
Height
442 mm
The 4 in 1 device
Weight
75 Kg
• One easy-to-use touch screen interface for all modes of operation
• Parallel Job Processing (Allows for lens preparation during edging)
• Remote Tracing Enabled
• OMA Connectivity Available
• Comprehensive Maintenance Menus via Touch Screen
• Software Updates available through Shape Administration Briot TechSoft.
Voltage
115 V - 240 V / 50 Hz - 60 Hz
THE KEY FEATURES OF
eXpression
The blocking process
• Easy Installation: Connect to water source, and plug in your machine.
• Easy Training: Simple touch screen interface with graphic icons based
on chosen processes.
• Ease of Use: Completes complex tasks with simplicity and accuracy.
• Easy Maintenance: Comprehensive tests and adjustment menus are a touch
away.
Easy blocking in just three steps:
1. Check the lens size on the screen using the 1:1 display
2. Layout lens in active or passive mode using eyepiece
3. Block lens using the specially designed blocking arm for precision
and accuracy
21
24/03/2014 15:25:31
Compact Systems
eMOTION m
Essential complement of compact systems
REF BBBAWZXZ
eMOTION m is a special version of eMOTION, offering secure tracing,
easy shape modification, simple and precise centering and blocking
and perfect finishing of flat and v-bevel. It is a perfect tool for a small
start-up optician
Screen
Data input is made easy, thanks to the high-resolution touch screen.
All commands on the screen, display of both eyes at 1:1 scale,
command flow systematically the same regardless of the edging process,
and easy-to-understand icons for almost immediate learning.
Input zone
• Upgraded, patented Briot tracer.
• The multi-axis tracer precisely records the frame’s characteristics,
its shape and its curvature.
• Protective cover against dust and any water sprays.
• Input of metal and plastic frames, patterns and demonstration lenses.
• Easy positioning of the frame.
• Manual clamping to prevent any distortion of ultra-thin frames.
• Gentle frame realignment during clamping operation [Smooth Scan].
Frame thickness and groove position measuring in order to obtain
a flawless fit of the lens into the frame.
• Short cycle: 1 minute for both eyes.
• Memory: 300 jobs and 200 patterns.
Edging zone
• All types of materials (CR39, PC, Trivex, Hi-index, glass).
• Small edging wheels, 90 mm in diameter, ideal for high-curve frames.
• Superpolish edger.
• Front and rear safety bevel.
• Specific edging cycle for superhydrophobic topcoatings:
No risk of axis slippage during any of the finishing phases.
• Bevel and rimless polishing.
Customisation zone
• Built-in Digiform lens shape modification software.
• Easy to modify lens dimensions (A- or B-size separately, proportional, etc.)
General
Width
728 mm
Depth
600 mm
Centering / blocking zone
Height
442 mm
• Parallax-free.
• Prism-free.
• Ergonomic.
• Easy to manoeuvre with just one finger.
• Simplified blocking in 3 steps.
• Easy block insertion –error-proof slot and visualisation of block position.
Weight
75 Kg
Voltage
115 V - 240 V / 50 Hz - 60 Hz
22
24/03/2014 15:25:42
Tracer
Compact Systems
SCANFORM NET 3
Shape entry
REF TCBWWX
Scanform Net sends your work orders, precisely
and with no loss of information, to an edging unit, either
on site or at a remote location.
Scanform Net, a software-coupled tracer, benefits from Briot's
10 years of remote edging know-how.
Benefits
> Optimized organization.
> A tailor-made investment.
> Proven effectiveness.
Optimized organization
• On the sales counter or at a shared workstation.
• Centralization of all customer & equipment data.
• Statistics and read-outs for business analysis.
• Secure sales/job chain.
• No more need to re-enter information.
A tailor-made investment
• Scanform Net can be part of a performance improvement program.
• Better control of turnaround times.
• Increased profitability of edging equipment.
• Better management of labor costs.
• Lower job cost.
Proven effectiveness
• Automatic recognition of the pattern holder.
• Automatic recognition of the pattern type.
• No distortion during frame input.
• Measurement of frame shape and thickness.
• Precision in the transmission of shapes and patient data.
• Transmission to an edger on site or at a remote location.
• Automatic recovery of the input in case the stylus comes
out of the frame groove.
• Automatic symmetry function.
• Available in built-in and counter-top versions.
• Integrates perfectly on sales counters or in your shop area.
General
Height
220 mm
Width
325 mm
Depth
270 mm
Weight
6 Kg
Voltage
60 W
Characteristics
Automatic positioning and centering of the frame
Controlled-pressure tightening jaws
Automatic left eye/right eye measurement device
with lens presence detector already in place
Automatic introduction of stylus
Constant, reliable stylus pressure
23
24/03/2014 15:25:43
Briot range
Briot range of edgers
eXPRESSION
eMOTION
With only one touch screen you get the
full control on the edger eXpression. You
reach best quality in finishing results through
extreme flexibility in processing steps. And
thanks to the eyepiece blocker, you can
check lens size and reduce parallax.
eMOTION, a combination of technologies providing all the necessary
functions for perfect glazing. With one
guiding principle: simplicity of use.
Simplicity of the interface and
ergonomic workflow.
Width
Depth
Height
Weight
Voltage
Power supply
Width
Depth
Height
Weight
Voltage
Power supply
600 mm
442 mm
728 mm
75 kg
115 V - 240 V / 50 Hz - 60 Hz
1 kW
/ eMOTION M
600 mm
442 mm
728 mm
75 kg
115 V - 240 V / 50 Hz - 60 Hz
1 kW
ALTA NX
The Alta NX adapt completely to your
needs and requirements. You can add all
the options you require when you need
them, according to the way you intend to
use the machine. This highly revolutionary
feature of the ALTA NX ensures that it will
be with you in the long term and will always
be up to date.
Width
Depth
Height
Weight
Voltage
Power supply
510 mm
615 mm
570 mm
69 kg
115 V - 240 V / 50 Hz - 60 Hz
1,6 kW
Always more performances
EDGERS
eMOTIONm
eXpression
eMOTION
Mineral roughing
▪
Rimless and bevel finishing
▪
▪
▪
▪
▪
▪
All plastics versions roughing
Rimless and bevel polishing
▪
▪
▪
Superpolish
▪
Hydrophobic lenses
▪
▪
▪
▪
▪
▪
TrivexTM
High curve lenses
▪
–
▪
TBS
–
–
–
▪
Rimless finishing
▪
▪
▪
▪
Motorised safety bevel,grooving
–
A
▪
▪
D
▪
▪
Functionalities
OMA connection
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
Briot Link™ connection
–
–
–
Digiform +
▪
▪
▪
Aesthetical bevel
Expert bevel
Manual bevel*
–
▪
▪
▪
Motorised drilling
Memory card
Bar codes reader
4D scanning
–
Sd Technology / Step Bevel
24
24/03/2014 15:26:00
all
d
to
ary
will
ways
Briot range
ALTA Pulse
ALTA Z
ALTA Zd
You can expect it all from Alta Pulse:
it makes the best finishing, drilling,
grooving and safety beveling, and
it has a special bevel for curved
shapes. It is fully versatile and can
adapt to individual requirements.
Faced with the need to provide fast
and accurate service for new lens
materials and frame designs, combined
with environmentally-friendly demands,
the ALTA Z is your solution.
Available in 2 versions: MINERAL
and ALL PLASTICS VERSION.
The innovative Alta Zd, the newest edger
from Briot, comes equipped with
capabilities that aim to make daily work
easier and more effective.
Alta Zd is made for achieving the highest
productivity as it is positioned as the
fastest retail edger on the market, and
meets every requirement for high end
edging in today’s industry.
Width
Depth
Height
Weight
Voltage
Power supply
Width
Depth
Height
Weight
Voltage
Power supply
510 mm
615 mm
570 mm
69 kg
115 V - 240 V / 50 Hz - 60 Hz
1,6 kW
ALTA NX Width
Depth
Height
Weight
Voltage
Power supply
510 mm
615 mm
570 mm
79 kg
230 V - 240 V / 50 Hz -60 Hz
1,6 kW
ALTA Z
ALTA Zd
▪
▪
▪
▪
▪
▪
Rimless polishing
Rimless polishing
Rimless polishing
Diamond polishing
Diamond polishing
Diamond polishing
Diamond polishing
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
–
–
–
▪
▪
▪
▪
ALTA PULSE
510 mm
615 mm
570 mm
79 kg
230 V - 240 V / 50 Hz -60 Hz
1,6 kW
All materials
▪
▪
–
▪
* preview before edging ▪ standard
▪ option
25
24/03/2014 15:26:12
Agathe, 5 years old
Even the most technical
challenges become
simple!
Edging as simple as child’s play
Easy to use and professional.
Do you want to benefit from all the functions
needed to produce all your jobs? Enjoy Emotion
and its small footprint, simplicity of use and
wide variety of functions: shape modification,
drilling, grooving, digital blocking - Available
for all sales outlets.
Be Simple, Be Professional, Be Motion
Find the official BRIOT distributor for your country on www.briot.com
24/03/2014 15:26:25
Workshop
28
28
29
29
30
30
REX 3000.1
REX 3000.2
COLUMN DRILL
AG5
DM3
OPTICUS RIVEX 50
31
31
32
32
33
34
MAGA
VAVA
A2100
T048
SONOREX
FILTRATION UNITS
24/03/2014 15:26:30
Workshop
Hand edgers
Rex 3000.1
REF NABZAZZ - Roughing
REF NABZBZZ - Finishing
REF NABZCZZ - Finishing+mini bevel
> Retouches, safety bevels, special jobs.
General
Height
370 mm
Width
350 mm
Depth
320 mm
Weight
14,4 kg
Voltage
220 V / 50 Hz
Power consumption
200 W
KEY POINTS
• No dipping.
• less wheel loading.
• less maintenance.
• very soft finishing surface.
Hand edgers
Rex 3000.2
REF NBBZDZZ - Roughing + Finishing
REF NBBZEZZ - Roughing + Finishing + Mini bevel
> Complete edging and finishing of a lens / retouch.
> Safety bavel: The rounded wheel edge helps you to produce an
extremely easy and meticulous job, even with high dioptered lenses.
General
Height
370 mm
Width
500 mm
Depth
320 mm
Voltage
220 V / 50 Hz
Power consumption
200 W
28
24/03/2014 15:26:35
Workshop
Auto groover
AG5 auto groover
REF 68 00 009
Automatic lens groover for glass,
plastic and polycarbonate lenses.
> Lens diameter: 24 mm to 72 mm
> Choice of three groove positions:
- parallel to convex face,
- parallel to concave face
- or median
> Lens thickness: 1.5 to 11 mm
> Groove depth adjustable up to 0.7 mm.
General
Height
150 mm
Width
170 mm
Depth
210 mm
Voltage
220-240 V / 50 Hz
Power consumption
80 W
KEY POINTS
• Easy access to wheel, which allows notches to be made.
Drill
Column Drill
REF 68 00 013
Drilling of metals and wood.
> 3 rotation speeds: 6 000 / 4 200 / 2 100 tours/mn.
> Capacity of the drill bit from 0,5 to 6 mm.
General
Height
340 mm
Width
120 mm
Depth
230 mm
Weight
3,1 kg
Voltage
230 V / 50 Hz
Power consumption
85 W
29
24/03/2014 15:26:39
Workshop
Drill
DM3 Drill
REF 68 00 011
The DM-3 Lens Drilling Machine can quickly drill all current lens materials,
polycarbonate, Trivex, CR-39 and mineral glasses, with high quality results.
The two sided drilling system performs speedy drilling with cracking the lens.
The diameter of the holes can be easily adjusted to a precision of 0.2 mm
Design & Solidity of bits: always a very precise and aesthetic finish.
Block to maintain the lens.
Allows correct inclination of the lens during the drilling.
Allows to fit the hole to the required diameter.
Easy to use with high quality results on rimless jobs.
Small footprint.
Possible diameter of drilling 0.8 mm to 2.8 mm.
General
Height
185 mm
Width
140 mm
Depth
275 mm
Voltage
230 V / 50 Hz
Power consumption
100-120 V / 60 Hz ou 200-240 V / 50 Hz
Multi-function riveting press
Opticus Rivex 50
REF 68 00 003
Multi-function riveting press, ideal for reparing frames.
> Supplied with accessories for:
- Riveting,
- drilling,
- marking.
> Expelling screws, perforating, bending.
> Ideal for fixing frames.
General
Height
260 mm
Width
140 mm
Depth
180 mm
Weight
2,5 kg
30
24/03/2014 15:26:41
Workshop
Frame Heater
Maga
REF 6840006
Frame heater with quiet and homogeneous heating.
> For assembling lenses in plastic frames.
> Quiet and homogeneous heating:
Hot / Cold air selection knob.
> Choice of 2 electronically controlled temperature settings:
100°C for acetate frames and 200°C for optyl frames or quick heat.
> Spot heating for nasal bridge or branches.
> Mounting platform to position frame with both sides in contact
with hot air flow.
General
Height
185 mm
Width
140 mm
Depth
275 mm
Weight
4,1kg
Voltage
230 V / 50 Hz
Power consumption
100-120 V / 60 Hz ou 200-240 V / 50 Hz
Frame Heater
Vava
REF 68 40 007
Frame heater with two extractable frame support arms.
> Temperature: 150°C.
> Two extractable frame support arms.
General
Height
210 mm
Width
170 mm
Depth
140 mm
Weight
2 kg
Voltage
230 V / 50 Hz
Power consumption
1200 W
31
24/03/2014 15:26:43
Workshop
Stress Viewer
A2100
REF 67 40 006
> Stress viewer with two polaroid filters.
> Stress analysis using two polarising plates.
> Lenses fitted in frame for tension measurement.
> Heat tempering on glass lens.
General
Height
165 mm
Width
134 mm
Depth
154 mm
Weight
0,700 kg
Voltage
220 V / 50 Hz
Polishing Unit
TO 48
REF 67 60 016
Polishing unit for polishing and sanding.
> 2 rotation speeds: 1 400 and 2 800 tours / mn.
> Cloth disk.
> Flannel disk.
> Red polishing paste.
> Yellow polishing paste.
> White polishing paste.
General
Height
200 mm
Width
460 mm
Depth
220 mm
Weight
8,5 kg
Voltage
220 V / 240 Hz
Power consumption
300 W
32
24/03/2014 15:26:46
Workshop
Ultrasonic cleaning machine
Sonorex
REF 65 60 016
> Minimum filling quantity 0.6 litre.
> Inbuilt heating: 65°C.
> Tank: stainless steel
> Case: stainless steel protected against drips
> Degree of protection: IP32
> Timer: 1 to 15 mns
>A
ccessories: insertion basket 113 x 113 x 45 mm
with stainless steel lid.
General
Internal dimensions of the tank:
Height
185 mm
Width
190 mm
Depth
60 mm
Capacity
0.9 liter
33
24/03/2014 15:26:47
Workshop
Filtration units
REF S130067
REF 21 90 389
REF 11 40 127
Tank (60L) with pump. For closed circuit use.
Big capacity 60 L.Three level of filtration,
perfectly adapted for edging even large amounts of polycarbonate.
Easy cleaning. First level of filtration (drawer) accessible
Drain valve allowing tank emptying
without moving. Protective plastic film.
Water pump holder with rollers
Water pump is then easier
to move.
Polyethylen protection bag
Single unit.
REF S180003
REF 11 40 143
Filtration Tank (20L). Can be used with most existing machines.
Capacity 20 L. 1 level of filtration
Protection plastic film. 20 L filtering tank for use on the water network.
Without pump. Compatible with all Briot edgers
Polyethylen protection bag.
Single unit
REF S130083
Pump alone
34
24/03/2014 15:26:51
Accessories
36
38
40
41
44
46
48
50
EYEPAD / ECO PAD
ALTA MEULEUSES
EMOTION / EXPRESSION
SILVER / SILVER +
ALTA XL / XLD
Alta XS
AXCELL
ACCURA CL / LAB
52
55
ACCURA CX / PRO
WORKSHOP ACCESSORIES
24/03/2014 15:26:52
Edging accessories
EYE PAD
Compact Edging adhesive pads
Recommended by Briot, these adhesive pads have been
developed by two of the world leaders in edging and
adhesives, to answer the growing demand of the optical
industry.
Adhesion and twisting resistance are Eye Pad key points.
Axis performance
Superior adhesion to a variety of lens types (mineral, CR39™,
polycarbonate, Trivex™), multi coats (hydrophobics…), blocks and edged
shapes, Eye Pad significantly improve axis performances: the accuracy
becomes a constant.
Twisting resistance
Developed for high speed edgers (lab), these adhesives decrease
the twisting risks whatever the edging speed is.
Safety
A high definition consumable, Eye Pad participates in the success
of a precise edging.
Keeping the lens firmly in place during the edging process contributes
to a significant improvement of the productivity, edging time
and global workshop efficiency.
26 mm
18 mm
23 mm
30 mm
Secure deadlines
A result always reached in the alloted time, first fit guarantee,
delivery deadlines are secured, stress disappears.
General
* Trivex & CR39 are PPG Industries Registered trademarks.
Partnumber
60 21 007 / 60 21 005
Size
18 mm / 26 mm
Uses
All edgers
Number of pads per box
1 000
NEW ECO PAD
Double sided adhesive-pads
Briot and Weco brands recommend the use of these high
quality adhesive pads which offer performance at an
affordable price.
General
Partnumber
60 21 013 / 60 21 014
Size
18 mm / 26 mm
Number of pads per box
1 000
36
24/03/2014 15:27:05
Edging accessories
19 mm
11 53 027
25 mm
11 53 026
16 mm / half eye
11 53 038
17 mm / half eye
11 53 521
19 mm
11 53 483
25 mm
11 53 482
16 mm / half eye
11 90 642
17 mm / half eye
SVS114006
19 mm
SVS114004
25 mm
SVS114005
16 mm / half eye
SVS114009
17 mm / half eye
11 38 171
19 mm
11 38 161
25 mm
11 38 162
16 mm / half eye
11 38 195
Diameter
11 53 034
17 mm / half eye
21 53 013
19 mm
21 53 012
25 mm
11 90 522
17 mm / half eye
11 90 406
19 mm
11 90 375
25 mm
SVS114006
17 mm / half eye
SVS114004
19 mm
SVS114005
25 mm
11 38 171
17 mm / half eye
11 38 161
19 mm
11 38 162
25 mm
Blocks
11 53 028
EMOTION
Block holder
17 mm / half eye
EXPRESSION
Lens clamping adaptor articulated
ALTA
Flexible lens clamp adaptor
Block holder
Blocks
Diameter
37
24/03/2014 15:27:35
Accessories
Alta ZD/ Z/PRO / pulse /NX Edgers
Spare Parts
REF 11 90 482 - ø 25 mm
REF 11 90 483 - ø 19 mm
REF 11 90 521 - ø 17 mm
REF 11 90 642 - ø 16 mm
Briot block holder
large
Briot block holder
medium
Briot block holder
small
16 mm Briot block holder
Only for Alta Z
REF SVS114005 - ø 25 mm
REF SVS114004 - ø 19 mm
REF SVS114006
ø 17 mm/half eye
REF SVS114009 - ø 16 mm
Lens clamping adaptor
articulated large
articulated medium
articulated small
REF SVS180125
Kit of bar code reader
(bar code reader + sample of code bar labels + holder)
Adjustment tools
REF 14 04 301
Lens feeler adjustment tool
38
24/03/2014 15:27:44
Accessories
Alta ZD/ Z/PRO / pulse /NX Edgers
Consumables
REF 11 38 162 - ø 25 mm
REF 11 38 161 - ø 19 mm
REF 11 38 171 - ø 17 mm
REF 11 38 195
Flexible lens clamp
adaptor large
Flexible lens clamp
adaptor medium
Flexible lens clamp
adaptor half eye
Flexible lens clamp
adaptor half eye
REF 11 53 026 - ø 25 mm
REF 11 53 027 - ø 19 mm
REF 11 53 028
ø 17 mm /half eye
REF SVS180075
Briot magnetic blocks
large
medium
small
Magnetic blocks set
5 blocks ø 25 mm
and 5 blocks ø 19 mm
REF 11 53 038
ø 16 mm / half eye
REF SV180097
REF 11 97 047
Removable lens feeler pads - Set of 4 pieces
Removable visor
Nouveau !
Nouveau !
REF 60 21 007 - ø 18 mm
REF 60 21 005 - ø 26 mm
REF 60 21 013 - Ø 18 mm
REF 60 21 014 - Ø 26 mm
Double side adhesive pads
medium - 1000 pieces
large - 1000 pieces
large - 1000 pieces
REF 24 07 020
REF 24 07 021
REF 24 07 037
REF SVS18058 - ø 0,8 mm
REF SVS180138 - ø 1 mm
Cleaning disk
roughing
Cleaning disk
finishing
Cleaning disk
finishing only for Alta Z
Left hand drill bit set
+ calibration lens only
for Alta NX and Z
Left hand drill bit set
+ calibration lens only
for Alta NX and Z
WARNING:
39
Edgers using left hand drill bit are recognizable by the «L» letter
on the drilling icons. Drilling sets are only available for Alta NX and Alta Z.
24/03/2014 15:28:07
Accessories
expression / eMotion
Spare parts
REF 11 90 375 - ø 25 mm
REF 11 90 406 - ø 19 mm
REF 11 90 522 - ø 17 mm
Briot block holder large
Briot block holder medium
Briot block holder small
Consumables
REF 21 53 012 - ø 25 mm
REF 21 53 013 - ø 19 mm
REF 11 53 034 - ø 17 mm
REF 11 38 162 - ø 25 mm
Plastic block large
Plastic block medium
Plastic block small
Flexible lens clamp adaptor large
REF 11 38 161 - ø 19 mm
REF 11 38 171 - ø 17 mm
REF 11 38 201
REF 14 06 504
medium
half eye
Lens feeler pad
Drilling bit
REF 11 97 050
REF 21 62 153
Visor
Seal with filter 20 x 27
REF SVS114004 - ø 19 mm
REF SVS114005 - ø 25 mm
REF SVS114006 - ø 17 mm
articulated medium
articulated large
small
40
24/03/2014 15:28:28
Accessories
Silver + / Silver Edgers
Spare Parts
REF 11 90 375 - ø 25 mm
REF 11 90 406 - ø 19 mm
REF 11 90 522 - ø 17 mm
REF SVS225046
Briot block holder
large
Briot block holder
medium
Briot block holder
small
Pattern and lens to lens
holder
REF 11 90 645
REF 37 30 003
REF 21 77 010
REF SVS222066
Pattern and lens to lens holder,
only for Silver +
Key maincover
Fan filter
Centering pad
REF SVS180104
REF SVS114005 - ø 25 mm
REF SVS114004 - ø 19 mm
REF SVS114006 - ø 17 mm
2mm single stylus head
for Scanform 6 and 7
large
medium
small
REF SVS180125
(bar code reader + sample of code bar labels + holder)
41
24/03/2014 15:28:36
Accessories
Adjustment Tools
REF 14 04 192
REF 14 04 185
REF 14 04 191
REF 14 04 255
Lens/lens offset calculation
pattern
Scan alignment
adjustment pattern
Pattern axis adjustment
Scanform gain adjustment tool
REF 11 38 162 - ø 25 mm
REF 11 38 161 - ø 19 mm
REF 11 38 171 - ø 17 mm
REF 21 53 012 - ø 25 mm
medium
half eye
Plastic block
large
REF 14 04 199
Calibration tool
Consumables
REF 21 53 012 - ø 25 mm
REF 21 53 013 - ø 19 mm
REF 11 53 034 - ø 17 mm
Plastic block
large
Plastic block
medium
Plastic block
small
42
24/03/2014 15:28:40
Accessories
Consumables
REF 31 90 077
REF 31 35 206
REF 11 38 181
REF 11 97 035
Brass screw for pattern holder
Single unit
Screw for lens feeler
tip Accura
Silver Lens feeler tip
Accura removable visor
REF 11 22 154
REF 11 74 128
REF 22 29 056
REF 22 29 052
Screen protector
Removable visor deflector
Fuse 25 AT 250V-5x20
REF 22 29 055
REF 22 29 002
REF 22 29 043
REF 22 29 038
REF 22 29 041
Nouveau !
REF 12 01 057
Nouveau !
REF 60 21 007 - ø 18 mm
REF 60 21 005 - ø 26 mm
REF 60 21 013 - Ø 18 mm
REF 60 21 014 - Ø 26 mm
large - 1000 pieces
large - 1000 pieces
REF 24 07 020
REF 24 07 021
REF 11 38 154
Cleaning disk
roughing
Cleaning disk
finishing
Silver + Lens feeler tip
Sold individually
43
24/03/2014 15:28:43
Accessories
ALTA XL / XLd Centering device
Spare Parts
REF SVS225041
REF SVS225042
REF SVS225044
REF SVS180125
Lens holder
Uncut patterns holder
Pattern and lens to lens holder
(bar code reader + sample
of code bar labels + holder)
REF SVS222066
REF SVS180104
Centering pad
2 mm single stylus head
Adjustment Tools
REF 14 04 227
REF 14 04 228
REF SV1404224
REF 14 04 192
Calibration lens +3
Calibration lens -3
Calibration lens
pattern
REF 14 04 185
REF 14 04 191
REF 14 04 255
Scan alignment
adjustment pattern
44
24/03/2014 15:28:47
Accessories
ALTA XL / XLd Centering device
Consumables
REF 11 53 026 - ø 25 mm
REF 11 53 027 - ø 19 mm
REF 11 53 028 ø 17 mm / half eye
REF SVS180075
Briot magnetic blocks large
Briot magnetic blocks medium
Briot magnetic blocks half eye
Magnetic blocks set
5 blocks ø 25 mm
REF 11 53 038
ø 16 mm / half eye
REF 22 01 058
REF 24 06 211
REF 24 06 503
half eye
Dulux lamp
Black permanent pen
Special pencil
for hydrophobic lenses
REF SV1177019
REF 22 29 038
REF 22 29 041
REF 11 92 074
Blocking unit filter
Set of 3
Fuse 2 AT 250V-5X20
Fuse1 AT 250V-5X20
Frame clip tube
Nouveau !
Nouveau !
REF 60 21 007 - ø 18 mm
REF 60 21 005 - ø 26 mm
REF 60 21 013 - Ø 18 mm
REF 60 21 014 - Ø 26 mm
large - 1000 pieces
large - 1000 pieces
45
24/03/2014 15:28:55
Accessories
ALTA XS Centering device
Spare Parts
REF S390016
REF S390017
REF 11 15 252
REF SVS225044
Lens holder small
Lens holder large
Hand rest
Pattern and lens
to lens holder
REF SVS222066
Centering pad
REF SVS180104
REF SVS180125
Adjustment Tools
REF 14 04 192
REF 14 04 185
REF 14 04 191
REF 14 04 255
pattern
Scan alignment
adjustment pattern
46
24/03/2014 15:29:02
Accessories
ALTA XS Centering device
Consumableses
REF 11 53 026 - ø 25 mm
REF 11 53 027 - ø 19 mm
REF SVS180075
Magnetic blocks set
5 blocks ø 25 mm
REF 11 53 038
ø 16 mm / half eye
REF 24 06 211
REF 24 06 503
half eye
Black permanent pen
Special pencil
Nouveau !
Nouveau !
REF 60 21 007 - ø 18 mm
REF 60 21 005 - ø 26 mm
REF 60 21 013 - Ø 18 mm
REF 60 21 014 - Ø 26 mm
large - 1000 pieces
large - 1000 pieces
47
24/03/2014 15:29:07
Accessories
AXCELL Centering device
Spare Parts
REF SVS225041
REF SVS225042
REF SVS225044
REF SVS180125
Lens holder
Uncut patterns holder
Pattern and lens to lens holder
REF SVS180052
REF SVS180103
REF SVS222066
REF SVS180104
3 mm double stylus head
for Scanform 6
for Scanform 6
Centering pad
REF 14 04 227
REF 14 04 228
REF SV1404224
REF 14 04 192
Calibration lens +3
Calibration lens -3
Calibration lens
pattern
Adjustment Tools
REF 14 04 185
REF 14 04 191
REF 14 04 255
Scan alignment
adjustment pattern
48
24/03/2014 15:29:14
Accessories
AXCELL Centering device
Consumableses
REF 11 53 026 - ø 25 mm
REF 11 53 027 - ø 19 mm
REF SVS180075
Magnetic blocks set
5 blocks ø 25 mm
REF SVS300037
REF 22 01 058
REF 24 06 211
REF 24 06 503
Opaque screen
Dulux lamp
Black permanent pen
Special pencil
REF SV1177019
REF 22 29 038
REF 22 29 041
REF 11 92 074
Blocking unit filter
Set of 3
Fuse 2 AT 250V-5X20
Fuse1 AT 250V-5X20
Frame clip tube
Nouveau !
Nouveau !
REF 60 21 007 - ø 18 mm
REF 60 21 005 - ø 26 mm
REF 60 21 013 - Ø 18 mm
REF 60 21 014 - Ø 26 mm
large - 1000 pieces
large - 1000 pieces
49
24/03/2014 15:29:21
Accessories
accura cl / lab Edgers
Spare parts
REF 11 90 482 - ø 25 mm
REF 11 90 483 - ø 19 mm
REF 11 90 521 - ø 17 mm
REF 37 30 003
Briot block holder
large
Briot block holder
medium
Briot block holder
small
Key maincover
REF SVS114005 - ø 25 mm
REF SVS114004 - ø 19 mm
REF SVS114006 - ø 17 mm
Right hand drill bit set
+ calibration lens
large
medium
small
REF 21 77 010
Fan filter
50
24/03/2014 15:29:31
Accessories
accura cl / lab Edgers
Consumables
REF 11 38 162 - ø 25 mm
REF 11 38 161 - ø 19 mm
REF 11 38 171 - ø 17 mm
REF 11 53 026 - ø 25 mm
medium
half eye
large
REF 11 53 027 - ø 19 mm
REF 11 53 028 - ø 17 mm
REF SVS180075
REF 31 15 306
medium
small
Magnetic blocks set
5 blocks ø 25 mm
et 5 blocks ø 19 mm
HC Screw
Single unit
REF 31 90 077
REF 31 35 206
REF 11 38 154
REF 33 05 200
Brass screw
Single unit
tip Accura
Lens feeler tip
Round washer
REF 24 07 021
REF 24 07 020
Cleaning disk
finishing
Cleaning disk
roughing
Right hand drill bit set + calibration
lens
51
24/03/2014 15:29:37
Accessories
accura cx / pro Edgers
Spare parts
REF 11 90 375 - ø 25 mm
REF 11 90 406 - ø 19 mm
REF 11 90 522 - ø 17 mm
REF SVS225046
Briot block holder
large
Briot block holder
medium
Briot block holder
small
Pattern and lens to lens
holder
REF 37 30 003
REF 21 77 010
REF SVS180052
REF SVS180103
Key maincover
Fan filter
for Scanform 6
for Scanform 6
REF SVS222066
REF SVS180104
REF SVS114005 - ø 25 mm
REF SVS114004 - ø 19 mm
Centering pad
articulated large
articulated medium
REF SVS114006 - ø 17 mm
REF SVS180125
REF 11 72 284
small
Plate for cover opening
See equipment technical data page 14
52
24/03/2014 15:29:41
Accessories
Adjustment tools
REF 14 04 192
REF 14 04 185
REF 14 04 191
REF 14 04 255
pattern
Scan alignment
adjustment pattern
REF 11 38 162 - ø 25 mm
REF 11 38 161 - ø 19 mm
REF 11 38 171 - ø 17 mm
REF 21 53 012 - ø 25 mm
medium
half eye
Plastic block
large
REF 14 04 199
Calibration tool
Consumables
REF 21 53 013 - ø 19 mm
REF 11 53 034 - ø 17 mm
REF 31 15 306
Plastic block
medium
Plastic block
small
HC screw
Single unit
53
24/03/2014 15:29:46
Accessories
Consumables
REF 31 90 077
REF 31 35 206
REF 11 38 154
REF 33 05 200
Brass screw for pattern holder
Single unit
tip Accura
Lens feeler tip
Round washer
REF 11 97 035
REF 11 22 154
REF 11 74 128
REF 22 29 056
Accura removable visor
Screen protector
Removable visor deflector
REF 22 29 052
REF 22 29 055
REF 22 29 002
REF 22 29 043
Fuse 8 AT 250V-5x20
Fuse 5 AT 250V-5x20
Fuse 3.15 AT 250V-5x20
REF 22 29 038
REF 22 29 041
REF 12 01 057
REF 60 21 007 - ø 18 mm
Fuse 2 AT 250V-5x20
Fuse 1 AT 250V-5X20
Carriage bulb
6x4x30-24V-3W
Double side adhesive
pads medium 1000 pieces
REF 60 21 005 - ø 26 mm
REF 24 07 020
REF 24 07 021
REF 24 07 022
Double side adhesive
pads large 1000 pieces
Cleaning disk
roughing
Cleaning disk
finishing
Cleaning disk
polishing
54
24/03/2014 15:29:48
Accessories
Formatic
Consumables
REF S802013
REF S802067
REF S802001
Uncut patterns (250 pcs)
Belt
Spare blade
Hand edgers
rex 3000.1 / 3000.2
Consumables
REF 11 18 006
REF 11 97 002
REF 22 07 112
REF 22 29 051
Licker for Rex
Working housing glass
Round protecting cap
Fuse
REF SVS500129
REF 22 07 129
REF 22 07 130
Rex 3000 Round switch
Rex 3000 - On/off switch
Protector on/off switch
55
24/03/2014 15:30:00
Accessories
Workshop
DM3 Drill
Consumables
REF S807079
REF S807033
REF S807032
Belt
Reamer
Drill bit HM19
AG5 Auto groover
Spare parts
REF S807039
REF 68 00 020
Protection housing
for diamond Wheel
Wheel cover
Consumables
REF S807071
REF S807051
REF 68 00 019
REF S807031
Wheel driving belt
Notched belt
Grooving wheel 1,2 mm
Diamond wheel
See equipment technical data pages 26 & 27
56
24/03/2014 15:30:04
Accessories
Workshop
Miscellaneous
Consumables
REF 67 30 022
REF 67 30 014
REF 67 30 012
REF 60 22 003
Soldering bars silver
3 pcs
Soldering bars gold / silver
3pcs
Bottle of acid solution soldare
Glucoxy
To clean edging room
REF 65 60 005
REF 10 00 055
REF 60 21 003
Cleaning product
For ultrasonic cleaning machine 1 litre
Loctite fixing gel
Spool of wire for spectacle frame
REF 60 21 006
REF 24 07 020
Blue chip
2000 pads
Cleaning disk roughing*
REF 24 07 021
REF 24 07 022
REF 24 07 035
REF 24 07 029
Cleaning disk*
Finishing
Cleaning disk*
Polishing
Cleaning disk*
Polishing
Cleaning disk*
Polishing Silver
Pour le réaprovisionnement du disque de polissage, commander selon la référence figurant au centre de votre disque existant.
* Cleaning your wheels reduces wear, please consult your user manual.
REF 24 07 016
REF 24 07 017
REF 24 07 018
Roughing cleaning stick*
Sold individually
Finishing cleaning stick*
Sold individually
Polishing cleaning stick*
Sold individually
57
24/03/2014 15:30:06
Sd Technology, a unique concept
in processing shapes
with complex contours.
conception_www.c-comme-c.fr - photos : Eric Bienvenu, Thinckstockphotos.fr
Inspired
by passion
24/03/2014 15:30:08
24/03/2014 15:30:09
conception_www.c-comme-c.fr - photos : Eric Bienvenu, Thinckstockphotos.fr
Luneau Technology Operations
2 rue Roger Bonnet_27340 PONT DE L’ARCHE_FRANCE
Tel. + 33 232 989 132_Fax + 33 235 020 294
www.briot.com
This document is not contractual - c comme c [rouen] 02 35 73 15 15 - ©photos : E.Bienvenu, C comme C, Briot - FC.00676 - ind.04- September 2013
A company of Luneau Technology Group
24/03/2014 15:30:09

See the full range

Transcription

Similar documents

Inżynier Utrzymania Ruchu – Elektryk

Cokin Mineral ND Filters technical sheet.indd

Portatile e senza fili, per uno screening di qualità Portatile e senza

Print - balearhouse

FUENTE RUTA DEL QUIJOTE ENGLISH

STATION ROAD, NORTH WINGFIELD

Traffic Engineering Company

Layout 1 (Page 1) - Weir`s Furniture

METU M BS536 METU M BSat 36 METU M 536 536 MET M ETU

ECLIPSE ECLIPSE