2016 Lankota Catalog (41 megs)

Transcription

Gordie and Charlotte Hofer farm near Frankfort, South Dakota. One day, as Gordie was passing
by my office, he shared his thoughts about Lankota, the team, and our products. We asked Gordie to
share his thoughts with all of you in this 2016 catalog. Thank you, Gordie, for your business and your
willingness to take pen to hand.
- Marvie Tschetter, President of LANKOTA, Inc.
From Gordie….
Farmers always build things stronger than they
need to be; and that is how Lankota builds their
products, right here in South Dakota, strong and
ready to do the job.
Lankota’ s team is made up of farmers, from the
owners, to the product specialist, to the product
technicians. They understand what the farmer
needs and what the farmer wants.
Lankota is great about keeping products updated
with new technology and machinery.
The
instructions for installation of the Lankota kits are
very well written and have many colored pictures to
help with the installation.
I like the way Lankota is always striving to find
something new and innovative that is useful for the
farmer and really works. Take for example the new
Grain Tank Cross Auger Clutch Shut-Off System.
My wife, Charlotte, used it more than I did. She
would call me on the radio and say, “This is really
slick.” If you have ever had to pay $5,500.00 to
replace your turret, you will know why this ShutOff System is worth the money. It worked and was
trouble free. We put through close to 200,000
bushels grain this year and it worked flawlessly.
The Lankota Stalk Stompers were a no-brainer. I
bought my first set two years ago, then I put a set
on my 4-wheel drive, and I just recently put a set on
a newer 4-wheel drive. My banker came out and
asked what they were used for. After I explained
the purpose of the Stalk Stomper, he agreed that
everybody should have these for what tires cost.
It is amazing to run the grain cart beside the
combine and watch stalks just layover as the
Lankota Stalk Stompers push them down. The
tires do not hit them head on, definitely money well
spent.
Lankota is a good family owned company; good
people to work with.
Table of Contents
Agricultural Drones...........................................................................................5
Case IH® ............................................................................................................9
Stalk Stompers .............................................................................................. 17
Header Trailers ............................................................................................... 47
Planting Parts ................................................................................................ 51
Multi-Coupler Blocks ..................................................................................... 55
Platform Heads .............................................................................................. 63
Draper/Pick-Up Heads................................................................................... 71
Corn Heads...................................................................................................... 75
Electrical ......................................................................................................... 83
Driveshafts/Adapters.................................................................................... 87
Feeder House.................................................................................................. 95
Parts & Accessories....................................................................................... 99
Red Devil Snow Blowers .............................................................................111
Lankota, Inc. is a privately owned company and is not affiliated with John Deere® or Deere & Company®, in any way.
The term "John Deere®" and the images of John Deere® equipment are for descriptive purposes only and in no way infer
that any part or accessory sold by Lankota or advertised in our marketing material is manufactured, sold, or endorsed
by John Deere® or Deere & Company®. Case IH® is a registered trademark of CNH Global.
2016 New Items
59
PAGE
PAGE
47
Header Trailers
PAGE
53
4 | 2016 Catalog
Two Point to Drawbar
Planter Hitch
JD® Combine Single Point
Replacement Valves
103
PAGE
PAGE
34
Stalk Stompers for
Drago and Geringhoff
www.LANKOTA.com
Grain Tank
Cross Auger Clutch
Shut-Off System
With drone-enabled technologies, know your fields better than ever before. Drone
provided aerial field imagery provides immediate information that ground scouting can’t
match. Field Health Reports present aerial imagery with clear color contrast that makes
identifying issues in the field easy and intuitive, enabling farmers to see where to make
timely adjustments during the growing season.
The reports provide critical, actionable agricultural intelligence that saves
producers money. Whether by making field scouting more efficient, or by identifying
areas compromised by hailstorms, pest, or other events in time to treat those areas and
increase yields or to deprioritize them for the season. The systems also easily integrates
with almost any Variable Application Rate equipment. Decrease costs and increase yields
by adding drone technology to your operation today!
Agricultural
Drones
Agricultural Drone
Agricultural Drones
Agricultural Drones
Agribotix - Lankota Partnership Expands International Customer Base
Agribotix, LLC. and Lankota have partnered to distribute turnkey drone-enabled agricultural
intelligence technologies and services to tractor dealers in the U.S., Canada, and Australia. The all-in-one
package combines Agribotix’s FarmLens™ cloud-based data platform with their purpose-built Enduro™
quadcopter to provide retailers with a fully supported, efficient, agricultural analytics solution.
Agribotix provides the platform, service and support. Users can scout and record aerial field data
across up to 160 acres in a single flight. The quadcopter can capture simultaneously near-infrared and
RGB (standard visual) images. The data collected is uploaded to the FarmLens™ platform, where it is
processed to produce high-resolution Field Health Reports (NDVI), essential for early identification of
yield-limiting problems, and shapefiles needed for variable application prescriptions. These reports can
be used to address issues and optimize inputs, leading to improved crop yields and increased profits for
growers.
“There’s a growing demand for our best-in-class ag intelligence solution,” said Agribotix CEO, Lou
Faust. “Our relationship with Lankota significantly expands our customer base and gives retailers the
confidence of working with two respected brands. Both companies are 100% focused on agriculture, so
we understand the kind of reliable information farmers need to better manage their crops and increase
their bottom lines.”
“We’ve been on the cutting edge of technology in manufacturing,” noted Marvie Tschetter, Lankota
CEO. “Now, expanding into ag intelligence is a logical extension of our business. We wanted to partner
with a service-oriented company that shares our dedication to quality and service.”
Field Health Reports from data collected by the Agribotix Enduro™ drone identify areas of concern in the field
and help farmers make input adjustments to improve yields and lower costs.
6 | 2016 Catalog
www.LANKOTA.com
Agricultural Drones
Turnkey Agricultural Drone System
Specifications
Size (rotor center-to-center).................................28”
Weight...................................................................6 lbs.
Cruising speed......................................................30 mph
Linear ight distance...........................................13 miles
Flight endurance..................................................25 minutes
Maximum wind tolerance....................................25 mph
Coverage per ight...............................................160 acres
Telemetry range...................................................1 mile
Batteries...............................................................2 per flight
Enduro™ Quad Copter
DRNENDQUAD
Training
Optional RGB Camera
DRNGPHERO4RGB
Aircraft
• Enduro Quad Copter Drone includes
3D Robotics PixhawkTM autopilot for
autonomous takeoff, ight and landing,
dual radios (telemetry and controller),
high quality servos, wiring and motors.
• 8 batteries (4,000 mAh, 22.2v)
• Battery charger (charges 4 batteries at
once)
• Tools and spares kit
• RC transmitter with rechargeable battery
• Custom-built hard case
Imaging System
• GoPro Hero 4 camera, upgraded with
a high quality, non-distorting lens and
NIR filter
• Optional RGB camera
• Two camera bay option available
Ground Control Station
• Android-based tablet or laptop computer
• GUI-based software for ight planning as
well as in ight monitoring
• Telemetry radio
• Agribotix FarmLens UploaderTM software
selects, prepares and uploads images for
processing in Farm Lens
• Custom training manual and checklist
• Two hours of live video conference or
telephone consultation for quick start
• Optional training at Agribotix or at your site
FarmLens™ Professional Data Processing
• Results returned quickly (typically next
business day)
• FarmLens Uploader PC software to
automate the upload process
• All products are geolocated
• Available file formats: Google Earth (KMZ),
GeoTIFF and shapefile
Included Reports
• Field Health Report: NDVI raw, NDVI false
color and RGB
• Variable Application Report: shapefile
format compatible with farm data
management software (e.g. SMS, SST)
• Localized End-User Report: PDF report
suitable for delivery to end-user with
above reports, augmented with historic
hyper-local, field-level weather information
(growing degree days, precipitation)
Support
• Phone and e-mail support
• 30-day parts and materials guarantee
• Optional, low-cost 12-month extended
warranty includes “no questions asked”
hot swap; incident fee may apply
Ph: 866.526.5682
2016 Catalog | 7
Agricultural Drones
FarmLens™ Data Processing and Analytics
Agribotix Data Products
Subscription Level
Field Health Report
Basic
Includes stitching for RGB
and/or NIR.
Identify and quantify issues within a field, guiding
more effective and efficient field scouting.
The output is a relative Normalized Difference
Vegetation Index (NDVI) map that shows the
relative vegetation condition within a field. The
result is available as Google Earth, GeoTIFF, and
JPG.
Variable Application Report
From the NDVI, Agribotix generates a gridded
management zone map in vector file (SHP)
format, compatible with most agricultural data
management packages (e.g. SMS, SST). This
report is an excellent input to tailor variable rate
application.
Professional
Localized End User Report
This complete, printable PDF report is an
excellent presentation to growers and other
customers. In addition to snapshots of the Field
Health Report, it contains specific, field-level
weather data, including growing degree days,
temperature trends and precipitation – all on
1- and 3-year trends.
Professional
Stand Count
Contact Lankota
Provides accurate plant counts across the survey
area, used to identify poor germination and
assist replanting decisions.
Custom Data Processing
Digital elevation models (DEM), weed maps,
and more.
8 | 2016 Catalog
www.LANKOTA.com
Contact Lankota
Case
®
IH
Case IH®
Case IH® Parts
Two Point to Drawbar Planter Hitch
LANDBPHCIH500
Hitch Conversion from 2-Point mount to drawbar pull.
Provides easy operation with plenty of ground clearance.
No welding or modification required on the planter.
Case IH®
Hose kit included.
Bull Pull® Category 4,
2" Draw Bar Pin
Pages 33 - 38
Case IH® Stalk Stompers
10 | 2016 Catalog
www.LANKOTA.com
Case IH® Parts
Case IH® Combine Single Point Hydraulic Blocks
Hydraulic Single Point Coupler block for combine side of CNH® combines.
LAN3P5065-5EMC
Hydraulic Single Point Coupler block for header side of CNH® combines.
LAN2P5065-2AFC
2 Port
Reel Fore/Aft or Hydraulic Deck Plates Functions
Ph: 866.526.5682
LAN2P5065-5AFC
5 Port
All Header Functions
2016 Catalog | 11
Case IH® Parts
Attaching JD® Head to Early Model Case IH® Combine
LANJD2CIH
LANJD2CIH will allow most JD® heads to
attach to Case IH® combines (2588 &
earlier).
Use the LAND300 driveshaft for this
conversion.
For Header Height and Hydraflex® control
kits, contact Lankota.
LANXB1340
LANS850
Use this adapter if head is already
equipped with driveshafts.
Storage Mounts for Case IH® driveshaft
(LAND350).
1 ⅜” 21 Spline.
1 per kit.
2 pieces per kit.
LAND300 (one shaft)
Used to convert JD® heads to Case IH®
combines.
Combine side is 1 ⅛” hex quick coupler.
Header side is a ⅛” hex coupler with
½” bolt that secures coupler to shaft on
header side.
Minimum collapsed length is 33 inches.
Maximum extended length is 41.5 inches.
Requires 8.82 inches of overlap.
2400 Series
12 | 2016 Catalog
www.LANKOTA.com
Case IH® Parts
Corn Head Ear Saver Kit
LAN79944BLK
Fits Case IH® corn heads without center bearing mount obstruction. “See through”
design with slotted mounting holes for easy adjustment.
Combine Hitch
LANCIHTH1910
Telescoping and swiveling hitch for
Case IH® 7120, 8120, 9120, 7230, 8230,
9230, 7240, 8240, and 9240 Series
combines.
Telescopes 20” for easy hook up.
Swivel tube has 3 positions.
Extends 5.5 feet behind the rear axle.
Mounts to the left side of axle.
For heavy duty pintle hitch design, order
LANCIHTH1910PH.
Pintle Hitch rating is 30,000 lbs.
Ph: 866.526.5682
2016 Catalog | 13
Case IH® Parts
Grain Tank Cross Auger Clutch Shut-Off System
Now available for late model
Case IH® combines.
This system will allow the operator to
empty out the unloading auger without
the grain tank being empty. This system
is operated by a foot switch in the cab.
Extremely easy to install. Start and stop
the augers as you wish while unloading on
the go!
Contact Lankota for specific models.
Auger Extension Kits
LANAUGCIHK
3 foot unloading auger extension kit for
Case IH® 1440 to 2388 combines.
Lankota auger extension kits allow farmers
to run wider headers and still unload on
the go.
14 | 2016 Catalog
www.LANKOTA.com
Case IH® Parts
Parts & Accessories
LANJDHMA
3 point hitch head mover.
Works with heads that mount to JD® and
Case IH® combines.
Works with Category II and III, three point
hitches.
Does not include cylinder.
LAN340 - 12635
Cylinder Option
Standard Specifications:
Size: 3.5” bore x 7”stroke
hydraulic
(1) Heavy duty Category III
swivel socket with grease
zerk
(1) 4.25” spacer bar
(1) 7.5" spacer bar
(2) Category III to Category II bushings
(2) 26” hydraulic hoses with ISO tips and 90 degree O-ring fittings
Cylinder option available for use with LANJDHMA.
Can also replace top link on 3 point hitch for other attachments.
ex: snow blowers, bale forks, etc.
Features:
Load holding valves built in • Hydraulically locks the cylinder in place with its check
and counter balance valve • Designed to avoid drifting in and out, even in the event of
hydraulic hose rupture.
Ph: 866.526.5682
2016 Catalog | 15
Case IH® Parts
Tractor Tow Kits
Case IH® 4WD & Quad Trac Tractors
Kits includes 1 ¼” cable, guides, and all mounting hardware for articulated tractors.
LANCIH719546006
Tow cable kit for Case IH Steiger® for models above
serial # Z7F108001 (with or without front weights).
LANCIHTC3708
For Case IH® 350/400/450/500/550/600
Tractors with front bumper weight, front weight
frame or front grill guard.
If tractor DOES NOT have any of the above, order
LANCIHTC3708 and LANCIHTC3215.
Drawbar Pin Conversion Kits
LAN47477445
Drawbar Pin Conversion Kit for Power Pin™ Category 5
Drawbars
• Fits Case IH®, New Holland®, and other tractors with
Category 5 drop pin drawbar
• Converts to Category 4 for pulling smaller implements
• Installs & removes quickly without any tools
LANCIHDPC139W:
LANR277873S: LANCIHDPC113W:
Upper Drawbar Adapter Bushing
Lower Drawbar Adapter Bushing
Pin Only
LANADCAT4/3
Drawbar pin conversion kit for Power Pin™ Category 4
drawbars
• Fits tractors with Category 4 drop pin drawbar
LANJDCAT423-103: Upper Drawbar Adapter Bushing
LANJDCAT423-102: Lower Drawbar Adapter Bushing
LANJDCAT423-104: Pin Only
16 | 2016 Catalog
www.LANKOTA.com
Stalk Stompers
Pages 42 - 44
Stalk Stomper Kits for Geringhoff® Corn Heads
Pages 45 - 46
Stalk Stomper Kits for Drago® Corn Heads
Stalk Stompers
New Items
Stalk Stompers
LANKOTA Stalk Stomper Parts
Generation II — LANKOTA Stalk Stomper Shoes
A.
LANSS655
(1) Green Stalk Stomper Shoe
with Poly
E.
LANSS651P
Hub for Torsion Spring
A.
LANSS655BLK
(1) Black Stalk Stomper Shoe
with Poly
F.
LANSS659
Complete Generation II
Flip Up Mount
B.
LANSS651S
(1) Skid Plate
G.
LANSS659-B
Straight Bar for Flip Up Mount
C.
LANSS600PLYK
(1) Stalk Stomper Poly Skid
with Hardware
H.
LANSS659E
Rear Swivel Mount
D.
LANSS651G
Generation II Torsion Spring
I. LANSS604
J.
Stalk Stompers
A.
LANSS651L
J.
Stalk Stomper Pin
Main Pivot Bracket
* See next page for hardware descriptions.
E.
D.
O.
E.
B.
P.
C.
F.
O.
H.
I.
G.
18 | 2016 Catalog
P.
www.LANKOTA.com
Q.
Stalk Stompers
LANKOTA Stalk Stomper Parts
Generation I — LANKOTA Stalk Stomper Shoes
K.
LANSS600
(1) Green Stalk Stomper Shoe
N.
LANSS601M
Main Arm
K.
LANSS600BLK
(1) Black Stalk Stomper Shoe
O.
LANSS654
GEN I & GEN II
Custom Bolt 5/8”
L.
LANSS601G
Generation I Coil Spring
P.
LAN1626000
GEN I & GEN II
Lock Nut 5/8”
LANSS601L
Stalk Stomper Receiver Bracket Q. LANSS601H
M.
GEN I & GEN II Chain
(7/16”- 7 links long)
K.
M.
P.
N.
L.
Q.
O.
Ph: 866.526.5682
2016 Catalog | 19
Stalk Stompers
All JD® 600 Series Corn Heads Feeder House Center Section Update Kit
John Deere®
4 Row Stalk Stomper Kit
(1) LANSS650F4 Mounting Kit
(4) LANSS655 Stalk Stomper Shoes with Poly
Estimated Installation Time: 2 hours
(1) LANSS650F2 Mounting Kit
Estimated Installation Time: 1 hour
* Do not need mounting brackets.
** This kit replaces feeder house section on corn heads utilizing Generation I Stalk Stompers.
20 | 2016 Catalog
www.LANKOTA.com
Stalk Stompers
(1) LANSS606R6 Mounting Kit
(4) LANSS659 Mounting Brackets
36” & 38” Row Spacing
(1) LANSS606R6W Mounting Kit
Ph: 866.526.5682
John Deere®
JD® 606C Series - 30” and Wide Row Corn Heads
2016 Catalog | 21
Stalk Stompers
JD® 608C Series - 30” and Wide Row Corn Heads
John Deere®
36” & 38” Row Spacing
(1) LANSS608R8W Mounting Kit
22 | 2016 Catalog
www.LANKOTA.com
Stalk Stompers
JD® 612C Series - 30” Corn Heads
Ph: 866.526.5682
John Deere®
12 Row Stalk Stomper Kit (1) LANSS612R12 Mounting Kit
2016 Catalog | 23
Stalk Stompers
JD® 612C Series - 30” Hydraulic Lift Corn Heads
JD®
12 Row Stalk Stomper Kit (1) LANSS612R12HYD Mounting Kit
Storage Bracket and Mounting Plate Kit for
JD® 600 Series Corn Head Storage Stands
(2012 and Newer)
LANSS600CSB
Supplemental kit for the above corn
head with the factory storage stand
kit (BXE10423) and LANKOTA Stalk
Stompers.
LANSSBXE10423 Complete storage stand kit for JD®
600C Series StalkMaster® Corn
Header.
• Raises header higher above
the ground to prevent knife
damage and aids in header trailer
transport.
• Required for the above series with
LANKOTA Stalk Stomper Kit.
• Allows easy insertion/removal of
leg stands without any tool.
24 | 2016 Catalog
www.LANKOTA.com
Stalk Stompers
JD® 612C Series - 20” or 22” Corn Heads
(1) LANSS612R8N Mounting Kit
Ph: 866.526.5682
John Deere®
12 Row Stalk Stomper Kit (1) LANSS612R12N Mounting Kit
2016 Catalog | 25
Stalk Stompers
JD® 616C Series - 30” Corn Heads
John Deere®
26 | 2016 Catalog
www.LANKOTA.com
Stalk Stompers
16 Row Stalk Stomper Kit (1) LANSS616R16HYD Mounting Kit
Ph: 866.526.5682
JD®
JD® 616C Series - 30” Hydraulic Lift Corn Heads
2016 Catalog | 27
Stalk Stompers
JD® 618C Series - 20” or 22” Corn Heads
John Deere®
28 | 2016 Catalog
www.LANKOTA.com
Stalk Stompers
18 Row Stalk Stomper Kit (1) LANSS618R18-22HYD Mounting Kit
JD®
JD® 618C Series - 20” or 22” Hydraulic Lift Corn Heads
Protect your tires
from stalk damage
THE LEADER IN STALK STOMPER TECHNOLOGY
Ph: 866.526.5682
2016 Catalog | 29
Stalk Stompers
All JD® 600 Series Universal
2 Row Mounting Kit
JD®
* This kit is for two rows and is unable to add additional row coverage.
JD® 40/90 Series
Individual Row Mounting Kit
JD®
(1) LANSS4090X Mounting Kit
* Do not use on 840/890 corn heads.
** Does not fit on rows 2 & 5 on 640/690 Series corn heads. Use (1) of LANSS4090XT.
30 | 2016 Catalog
www.LANKOTA.com
Stalk Stompers
(1) LANSS840/90R8 Mounting Kit
Ph: 866.526.5682
John Deere®
JD® 840/90 Series - 30” Corn Heads
2016 Catalog | 31
Stalk Stompers
JD® 1240/90 Series - 30” Corn Heads
12 Row Stalk Stomper Kit (1) LANSS1240/90R12 Mounting Kit
John Deere®
32 | 2016 Catalog
www.LANKOTA.com
Stalk Stompers
JD® 600F HydraFlex® Stalk Stompers
Tire Configuration
John Deere®
John Deere®
600F HydraFlex® Flex Auger Head 600F HydraFlex® Flex Draper Head
Order Kit #
Order Kit #
LANSS600F-30D
LANSS6FD-30D
LANSS600F-3036D
LANSS6FD-3036D
Singles - 30.5” and 800mm
LANSS600F-36S
LANSS6FD-36S
Singles - 900mm
LANSS600F-42S
LANSS6FD-42S
Singles - 1250mm
LANSS600F-30D
LANSS6FD-30D
Duals - 520mm and 580mm
Duals - 650mm
Specifically designed for use with the Lankota Header Trailers.
Ph: 866.526.5682
2016 Catalog | 33
Stalk Stompers
JD® Tractor Stalk Stompers
Tire Configuration
9R Series
4WD Tractors
9030 Series
4WD Tractors
Triples
480mm & 520mm
LANTS9R-24T
LANTS9030-24T LANTS9020-24T LANTS8070-24T
Duals
480mm & 520mm
LANTS9R-24D
LANTS9030-24D LANTS9020-24D LANTS8070-24D
Duals
620mm & 650mm
LANTS9R-30D
Duals
710mm & 800mm
LANTS9R-36D
Singles
800mm
LANTS9R-36S
LANTS9030-36S
Dedicated Hydraulic Remote Recommended
34 | 2016 Catalog
www.LANKOTA.com
9000 & 9020 Series 8060 & 8070 Series
4WD Tractors
4WD Tractors
LANTS9020-36S
LANTS8070-36S
Stalk Stompers
Case IH® 2206 : 2406 : 2606 : 3206 : 3406 Series - 30” Corn Heads
New Holland® 98 "X" Series Corn Heads
(6) LANSS655BLK Stalk Stomper Shoes with Poly
CIH®
LIKE, FOLLOW, SUBSCRIBE!
/lankotainc
/lankota_sd
Ph: 866.526.5682
/LankotaGroup
2016 Catalog | 35
Stalk Stompers
Case IH®
36 | 2016 Catalog
www.LANKOTA.com
Stalk Stompers
Ph: 866.526.5682
Case IH®
Case IH® 4208 : 4408 Series - 30” Corn Heads
2016 Catalog | 37
Stalk Stompers
Case IH® 4212 : 4412 Series - 30” Corn Heads
New Holland® 99 Series Corn Heads
Case IH®
38 | 2016 Catalog
www.LANKOTA.com
Stalk Stompers
Ph: 866.526.5682
Case IH®
2016 Catalog | 39
Stalk Stompers
Case IH® 4200 : 4400 Series
New Holland® 99 Series
Individual Row Mounts
CIH®
(1) LANSS2600X0 Mounting Kit
Case IH® 2000 : 3000 Series
CIH®
(1) LANSSCIH20/30 Mounting Kit
Case IH® 1000 Series
CIH®
(1) LANSSCIH10 Mounting Kit
40 | 2016 Catalog
www.LANKOTA.com
Stalk Stompers
Case IH® Quadtrac Tractor Stalk Stompers
LANTSQ1795
42” Wide Shoes
¼” AR200 abrasion resistant replaceable shoe
Hydraulically operated to raise and lower
Ph: 866.526.5682
2016 Catalog | 41
Stalk Stompers
Drago® 6 Row, Series II – 30” Corn Heads
Drago®
(1) LANSSDR630R6 Mounting Kit
For new GT Series contact Lankota.
42 | 2016 Catalog
www.LANKOTA.com
Stalk Stompers
Drago®
Ph: 866.526.5682
2016 Catalog | 43
Stalk Stompers
12 Row Stalk Stomper Kit (1) LANSSDR1230R12 Mounting Kit
Drago®
44 | 2016 Catalog
www.LANKOTA.com
Stalk Stompers
(1) LANSSGH830R8 Mounting Kit
Ph: 866.526.5682
Geringhoff®
Geringhoff® 8 Row – 30" Corn Heads – 2013 & Newer Models
Rota Disc® & Northstar®
2016 Catalog | 45
Stalk Stompers
Geringhoff® 12 Row – 30" Corn Heads – 2013 & Newer Models
Rota Disc® & Northstar® / Folding & Non-Folding
12 Row Stalk Stomper Kit (1) LANSSGH1230R12 Mounting Kit
Geringhoff®
46 | 2016 Catalog
www.LANKOTA.com
Header Trailers
Header Trailers
Header Trailers
Header Trailer
Constructed with the same quality and precision that all Lankota products are known for,
the Lankota Header Trailer is designed to accommodate Lankota Stalk Stompers with ease!
Header Trailers
Trailer Lengths Available All lengths available in (b) black, (g) green, or (r) red.
LANHT133(B, G, or R) - 33’ Non-DOT (single rear axle)
LANHT233D(B, G, or R) - 33’ DOT LANHT238D(B, G, or R) - 38’ DOT
LANHT243D(B, G, or R) - 43’ DOT
LANHT248D(B, G, or R) - 48' DOT
48 | 2016 Catalog
www.LANKOTA.com
Header Trailers
Header Trailer Features
• Pre-loaded 10” x 10” x ½" thick wall mono-beam
• Extra-wide 8” x 3” adjustable rest beam
• Heavy-duty 2 5⁄16” ball coupler
• Durable polyethylene removable fenders
• 6 foot telescoping tongue
(24” maximum extension)
Ph: 866.526.5682
2016 Catalog | 49
Header Trailers
• Rear double-axle
• DOT lighting package
• Electric brakes on all axles
• Swing back trailer jack
• Total support adjustment bracket
LANHT1100
Optional spare tire kit
50 | 2016 Catalog
www.LANKOTA.com
Planting Parts
Page 53
Two Point to Drawbar Planter Hitch for JD® and Case IH®
Planting Parts
New Items
Planting Parts
Fertilizer Tank
LANFTJD00
For JD® "R", 30, & 20 Series 4WD Tractors
•
•
•
•
•
•
•
1,000 gallon capacity
Welded steel frame
2” fill port
3” vent port
Two sight gauges
Top access port
Stop, tail, and turn lights
HID Work Light Package included in
LANFTJD00.
Removal of quick hitch is necessary on tractors with 3-point option.
Planting Parts
When tank is full of fertilizer, approximately 15,000 lbs. of weight is
added to the tractor load.
52 | 2016 Catalog
www.LANKOTA.com
Planting Parts
Two Point to Drawbar Planter Hitch
Hitch Conversion from 2-Point mount to drawbar pull.
Provides easy operation with plenty of ground clearance.
No welding or modification required on the planter.
Hose kit included.
LANDBPH100
For John Deere®
LANDBPHCIH500
For Case IH®
Bull Pull® Category 4, 2" Draw Bar Pin
Corn Planter Off-Set Hitch
LAN2PT1700
Save tires from stubble damage on the planting tractor by being able to plant directly
between the old rows by offsetting planter from tractor. Fits all JD® 2-point corn planters.
No tractor or planter modifications required.
Spacing configurations included:
• Standard factory position (zero offset)
• 7.5” Offset from tractor for 15” rows
• 13” Offset from tractor for 30” rows
Ph: 866.526.5682
2016 Catalog | 53
Planting Parts
LANJWK16
FURROW CRUISERS™ are designed to fit into the
closing wheel hubs that are utilized on John Deere®,
Kinze®, and late model White® planters. This saves
you money - no buying an entire new assembly.
Insert only — use with original hubs.
Order (2) per row
LANJWK16C
FURROW CRUISERS™ crumble the dirt into the furrow,
simultaneously applying light pressure with built in
depth control.
FURROW CRUISERS™ are recommended for use on both
sides of the furrow.
If ordering for a JD® 7000 Series Planter, please specify.
Order (2) per row
LANJWK16SB
FURROW CRUISERS™ shallow depth closing wheel.
Primarily used for shallow seeding depths such as sugar
beets and cotton.
LANJWK6SBC — Order (2) per row.
Complete Assembly
LANDC-13
DRILL CRUISERS™ cast iron closing wheels are direct
replacements for the stock closing wheels on John
Deere® 60 and 90 Series no-till drills and air-seeders.
These wheels smooth out the ride of the closing wheel
and offer a more aggressive closing action, without
losing any of the control.
Order (1) per row.
Complete Assembly
54 | 2016 Catalog
www.LANKOTA.com
New Items
Combine Side Single Point Hydraulic Valve Replacements
Page 59
Combine side single point hydraulic ½" valve replacement. This is a Parker Hydraulics™
original, identical replacement part.
Combine side single point hydraulic ⅜" valve replacement. This is a Parker Hydraulics™
original, identical replacement part.
Multi-Coupler Blocks
Case IH® Combine Single Point Hydraulic Blocks
Hydraulic Single Point Coupler block for combine side of CNH® combines.
LAN3P5065-5EMC
Hydraulic Single Point Coupler block for header side of CNH® combines.
LAN2P5065-2AFC
2 Port
Reel Fore/Aft or Hydraulic Deck Plates Functions
56 | 2016 Catalog
www.LANKOTA.com
LAN2P5065-5AFC
5 Port
All Header Functions
JD® Combine Single Point Hydraulic Blocks
Reel Drive
Pressure Hose
Reel Fore Hose
Header Side
Reel Aft Hose
Combine Side
Reel Drive
Return Hose
Reel Lift Hose
Reel Fore
Light Blue
Reel Drive Pressure
Yellow
Reel Aft
Dark Blue
Reel Drive Return
Red
Reel Lift
Green
Ph: 866.526.5682
2016 Catalog | 57
JD® Combine Single Point Conversion
LAN84207
Hydraulic single point for use with JD® 50
Series STS combines.
LAN84208
Series Walker combines with hoses from
hydraulic manifold.
LAN84209
Series Walker combines with steel lines
from hydraulic manifold.
LAN84209NE
Hydraulic single point for use with JD® 00 &
10 Series combines.
For Hydraflex™ header control on D-A-M™
combine, see LANHBO-JD10-31Q (Page 86).
58 | 2016 Catalog
www.LANKOTA.com
LANAH225671
Combine side single point hydraulic ½" valve replacement. This is a Parker Hydraulics™
original, identical replacement part. Service tool required: John Deere® part #AH201808.
LANAXE21789
Combine side single point hydraulic ⅜" valve replacement. This is a Parker Hydraulics™
original, identical replacement part. Service tool required: John Deere® part #AH201808.
Ph: 866.526.5682
2016 Catalog | 59
JD® Header Single Point Multi-Coupler Blocks
LAN166990
Multi-coupler block without couplers.
LAN201300
Multi-coupler block without couplers or rubber plugs.
LAN166991
(2) LAN166915
(1) LAN166916
(1) LAN166917
(1) LAN166918
Blue Couplers
Red Coupler
Yellow Coupler
Green Coupler
All Functions
LAN166992
(1) LAN166915 Blue Coupler
Reel Fore Function
Primarily used with the Geringhoff® single point conversion.
LAN166993
(2) LAN166915
Blue Couplers
Reel Fore & Reel Aft Functions
Hydraulic deck plates
LAN166994
(1) LAN166916 Red Coupler
(1) LAN166917 Yellow Coupler
Reel Drive & Reel Return Functions
60 | 2016 Catalog
www.LANKOTA.com
LAN166995
(1) LAN166918 Green Coupler
Reel Drive, Reel Return & Reel Lift Functions
LAN166996
Reel Drive Coupler in Reel Lift Port
Primarily used to raise & lower hood on Shelbourne® stripper heads.
LAN166997
(2) LAN166915 Blue Couplers
Reel Drive, Reel Return, Reel Fore & Reel Aft Functions
LAN166998
(1) LAN166918 Green Coupler
Reel Lift Function
Don't miss out on product specials!
Send us an email at
[email protected]
Ph: 866.526.5682
2016 Catalog | 61
Individual Hydraulic Couplers
The small dark blue coupler and the small light blue coupler are exactly the same.
The colors differentiate installation purposes and header functions only. LANWS125
Snap ring included with each individual coupler. Parker Hydraulic® original, identical
replacement parts.
LAN166915
LAN166916
LAN166917
LAN166918
Coupler Seal Repair Kits
LAN166987
Large ½” Coupler O - Ring Kit
LAN166988
Small ⅜” Coupler O - Ring Kit
Coupler Block Storage Bracket
LAN204828S
Storage bracket for multi-coupler blocks. Hardware
included.
Black storage bracket order LAN204828BLKS
62 | 2016 Catalog
www.LANKOTA.com
Grain Divider Points for John Deere® 900 and 600 Series Flex Heads
Page 68
Platform Heads
Platform Heads
Platform Heads
LAN84206
Conversion kit to hydraulically and electrically connect a JD® 600 Series platform
head to a JD® 9000, 10, or 50 Series combine equipped with multipoint hydraulic
connections.
Call Lankota for Header Height and Contour Master™ Sensing Kits.
Platform Heads
LAN84206 Conversion Kit Components
LAN128240
3/8” Female Handle Valve
LAN128241
1/2” Female Handle Valve
LAN209
Wiring Harness
31 Pin Single Point to
31 Pin 50 Series
For use with JD® 9050 Series to JD® 600F Conversion
If the combine does NOT have the Hydraflex™ button on the armrest,
* Order from John Deere® bundle #BH84094
If the combine is between serial #685301 - 695600 and the header control board has
not been updated already,
* Order from John Deere® part #AH220605
For use with JD® 9000 or JD® 9010 Series Combines
Use LAN84206NE and LANHPO-JD10-31Q (Electrical Flex Conversion System).
Conversions to new JD® 600HF heads require adapting feeder house to new hook style.
(Pages 96 & 97)
64 | 2016 Catalog
www.LANKOTA.com
Platform Heads
LAN84151
Conversion kit to convert platform heads
with 31 pin electrical connections to
single point hook up with reel fore/aft.
LAN166991
Multi-Coupler Block with Fittings
LANEC300
Wiring Harness
31 Pin to 31 Pin Single Point
LAN204828S
Storage Bracket
* If no electrical is needed order LAN84151NE.
JD® 60 Series and newer combines will not recognize D-A-M™ Header Height Control.
Contact Lankota for information on adding Header Height and Contour Master® for these heads.
LAN84152
Conversion kit to convert platform heads
with 31 pin electrical connections to
single point hook up without reel fore/aft.
LAN166995
LANEC300
Wiring Harness
LAN204828S
Storage Bracket
* If no electrical is needed order LAN84152NE.
JD® 60 Series and newer combines will not recognize D-A-M™ Header Height Control.
Contact Lankota for information on adding Header Height and Contour Master® for these heads.
Ph: 866.526.5682
2016 Catalog | 65
Platform Heads
LAN84211
Cutting platform wedge kit allows for a proper cutter bar angle on
JD® 900 Series Flex Heads.
Wedge kit guide for CWS and CTS Combines
Determine the correct
amount of angle:
1. Position the feeder house so
it is perpendicular to the ground.
Use a level on front surface of
feeder house to obtain this. See
picture.
Figure A
Wedge
Angle
Wedge
Thickness
Kit Number
Less than 21.5”
0.0º
—
None Required
21.5” - 29.5”
1.5º
3/8”
LAN84211-1.5
29.5” - 31”
3.0º
4 1/4”
LAN84211-3.0
More than 31”
4.5º
4 7/8”
LAN84211-4.5
Wedge kit guide for STS Combines
Figure A
Wedge
Angle
Wedge
Thickness
Kit Number
Less than 28”
0.0º
—
None Required
28” - 30.5”
1.5º
3/8”
LAN84211-1.5
30.5” - 32.5”
3.0º
4 1/4”
LAN84211-3.0
More than 32.5”
4.5º
4 7/8”
2. Measure from center of
driveshaft to the ground shown in
* For all degrees order LAN84211
picture.
LAN84211-4.5
3. Compare measurement with
chart values for ordering proper
wedge kit.
66 | 2016 Catalog
www.LANKOTA.com
Platform Heads
LAN84398
Cutting platform wedge kit allows for a proper cutter bar angle on
JD® 600 Series Flex Heads.
* Model year 2004 requires the LAN84211 wedge kit shown on previous page.
Wedge kit guide for CWS and CTS Combines
Figure A
Wedge
Angle
Wedge
Thickness
Kit Number
Less than 21.5”
0.0º
—
None Required
21.5” - 29.5”
1.5º
2 1/4”
LAN84398-1.5
29.5” - 31”
3.0º
3 1/4”
LAN84398-3.0
More than 31”
4.5º
3 5/8”
LAN84398-4.5
Wedge kit guide for STS Combines
Figure A
Wedge
Angle
Wedge
Thickness
Kit Number
Less than 28”
0.0º
—
None Required
28” - 30.5”
1.5º
2 1/4”
LAN84398-1.5
30.5” - 32.5”
3.0º
3 1/4”
LAN84398-3.0
More than 32.5”
4.5º
3 5/8”
LAN84398-4.5
* For all degrees order LAN84398
Determine the correct
amount of angle:
1. Position the feeder house so
it is perpendicular to the ground.
Use a level on front surface of
feeder house to obtain this. See
picture.
2. Measure from center of
driveshaft to the ground shown in
picture.
3. Compare measurement with
chart values for ordering proper
wedge kit.
Ph: 866.526.5682
2016 Catalog | 67
Platform Heads
LANGD200
Used on JD® Flex & Flex Draper heads to separate standing crop from the material
being cut. The LANGD200 comes as a set of two.
* Must have poly snouts.
** Does not fit 45’ Flex Draper heads.
LAN84SSH
Conversion kit for Shelbourne®
stripper head to single point hook up.
LAN84SSH Conversion Kit Components
LAN166996
LANEC300
Wiring Harness
LAN204828BLKS
Storage Bracket (Black)
* If no electrical is needed order LAN84SSHNE.
LANEC100 wiring harness may also be required if the header has a 16 pin wiring harness.
68 | 2016 Catalog
www.LANKOTA.com
Platform Heads
LANAP200
Driveshaft conversion kit for early model JD® 900 Series headers to JD® driveshaft
technology.
This kit is for headers with serial #635100 and above.
This kit puts Contour Master™ shafts on an old style rigid or flex head.
*To add Header Height and Contour Master™ Sensors, contact Lankota.
Qty
2 LAND450
LANAP200 Kit Components
Driveshaft 1 3/8” 21 Spline Quick Coupler,
Header End is 1 1/8” Hex
1
LANHP200
2 Platform Hanger Bearing
Assemblies with Hex Bearings
1
LANS500
2 PTO Supports
1
LANC400
Clutch Adapter
Ph: 866.526.5682
2016 Catalog | 69
Platform Heads
LANAP202
Driveshaft conversion kit for early model JD® 200 & 900 Series headers with 1 ¼”
round shafts to JD® driveshaft technology.
This kit is for headers prior to serial #635100.
* To add Header Height and Contour Master™ Sensors, contact Lankota.
Qty
2 LAND450
Driveshaft 1 3/8” 21 Spline Quick Coupler,
Header End is 1 1/8” Hex
1
LANHP202
2 Platform Hanger Bearing
Assemblies with Round Bearings
1
LANS500
2 PTO Supports
1
LAN102
Clutch Adapter
1
LANXB1720
1 1/4” Round to
1 1/8” Hex Adapter
70 | 2016 Catalog
www.LANKOTA.com
Come visit us at our booth! The Lankota team will be at the following farm shows with
our top products and newest innovations. Be sure to check out our Facebook and Twitter
pages for details.
February
2-4
Iowa Power Farming Show
Des Moines, Iowa
10 - 13
National Farm Machinery Show
Louisville, Kentucky
June
15 - 17
Canada's Farm Progress Show
Regina, Saskatchewan
August
2-4
Minnesota Farmfest
Morgan, Minnesota
16 - 18
Dakotafest
Mitchell, South Dakota
30 - 9/1
Farm Progress Show
Boone, Iowa
September
13 - 15
Husker Harvest Days
Grand Island, Nebraska
Dates Yet To Be
Determined
---
Greater Peoria Farm Show
Peoria, Illinois
* All dates are subject to change.
Draper/Pickup Heads
2016 Farm Show Calender
Draper/Pickup Heads
LAN84151MD (MacDon®)
Conversion kit for MacDon® heads to combines
with single point hook up.
LAN166991
Multi-Coupler Block
with Fittings
LANEC300
Wiring Harness
LAN204828BLKS Storage Bracket (Black)
LAN84112
Draper/Pickup Heads
Conversion kit for JD® 900D Series draper
heads to combines with single point hook up.
LAN166991
Multi-Coupler Block
with Fittings
LANEC300
Wiring Harness
LAN204828S
Storage Bracket
LAN84122
Conversion kit for late model draper heads from
single point hydraulic and electrical to multipoint
hook-up for earlier model combines.
LAN128241
½” Female Handle Valve
72 | 2016 Catalog
LAN128240
⅜” Female Handle Valve
LAN209
31 Pin 50 Series
www.LANKOTA.com
Draper/Pickup Heads
LANAP300
Driveshaft conversion kit for older JD® 200 & 900 Series pick up heads to shaft driven
JD® combines. Driveshaft has built in radial pin clutch.
Smaller heads may require modifying the length of the driveshaft.
LAND350
Driveshaft (1) with Radial
Pin Clutch
LAN26220
Hex Shaft Assembly
LAN108
PTO Support
DO NOT USE THIS KIT FOR 12’ PICKUP HEADS &
WIDE BODIED COMBINES:
JD® 9600, 9610, or 9650W
LAN395831
Complete replacement
clutch 2300 Series
LAN370767
Complete replacement
clutch 2400 Series
Ph: 866.526.5682
LAN043439K
15 additional springs for radial
pin clutch for extra tough crop
conditions and higher torque
settings.
2016 Catalog | 73
Draper/Pickup Heads
LAN84111
Conversion kit for belt pickup heads to single point hydraulic and electrical connection.
You will also need to purchase LANEC100 if the header electrical harness is a 16 pin
connection.
If you need this kit without the electrical, order LAN84111NE and LANEC31QP.
Persistence, Perseverance,
and Stubborn Determination
When our family officially incorporated Lankota in
2001, we were farmers that needed to find a solution
to a problem. In the shop after all our farm work was
complete, we built Lankota combine header adapters with
the philosophy, “anything worth doing takes persistence,
perseverance, and stubborn determination”. This still
stands true today. Over the years our business has been
blessed to see continued growth, but we have never lost
sight of what is most important - the customer. We
would like to express our sincere appreciation for your
interest in Lankota. Rest assured, when you purchase a
Lankota product, you are buying a high-quality solution
that is built to last.
Marvie Tschetter, President of LANKOTA, Inc.
74 | 2016 Catalog
www.LANKOTA.com
Corn Heads
Page 80
Corn Head Ear Saver Kit for Case IH®
Corn Heads
New Item
Corn Heads
Driveshaft Conversion Kit for Corn Heads
LANAR100
Conversion kit for level land corn heads to JD® shaft driven combines.
Qty. LANAR100 Conversion Kit Components
2 LAND450 Driveshaft 1 ⅜” 21 Spline Quick
Coupler, Header End is 1 ⅛” Hex
1
LANHR100 2 Corn Hanger Bearing Assemblies
1
LANS500
2 PTO Supports
To add Header Height and Contour Master™ Sensors, contact Lankota.
LANHR100
Conversion kit for level land corn heads to JD® shaft driven combines.
Corn Heads
LANHR100 Conversion Kit Components
LANHR100
Bearing and Support Kit Only
For Corn Heads Driven on Left Side Only
LANHR100.5 Half of LANHR100
76 | 2016 Catalog
www.LANKOTA.com
Corn Heads
LAN84108
Conversion kit for hydraulic and electrical connections on early model corn heads to
combines with single point hook up. This kit is utilized if the corn head has hydraulic
deck plates.
You may also need the LANEC100 wiring harness if the head electrical harness is a 16
pin connection.
If you need a LAN84108 without electrical, order LAN84108NE & LANEC560.
LAN166993
Multi-Couple Block with 2 Fittings
LANEC300
Wiring Harness 31 Pin to 31 Pin
Single Point Hookup
LAN204828S Storage Bracket
To add Header Height and Contour Master™ sensors to a JD® 40, 90, or 600 Series
corn head, contact Lankota.
LAN166993
LANEC300
Optional Contour Master ™
& Header Height Kit
LAN84108G
Conversion kit for Geringhoff® corn heads to combines with single point hook up
without electrical. For folding Geringhoff® corn heads, please contact Lankota.
LAN84108G Conversion Kit Components
LAN166992
Multi-Coupler Block with 1 Fittings
LAN204828BLKS Black Storage Bracket
Ph: 866.526.5682
2016 Catalog | 77
Corn Heads
LAN84108R
Conversion kit for early model corn heads with hydraulic deck plates and a corn reel to
combines with single point hook up.
You may also need the LANEC100 wiring harness if the head electrical harness is a 16
pin connection.
If you need a LAN84108R without electrical, order, LAN84108RNE & LANEC560
dummy plug.
LAN84108R Conversion Kit Components
LAN166997
Multi-Coupler Block with 4 Fittings
LAN204828S
Storage Bracket
LAN84118
Conversion kit for late JD® 90 & 600 Series corn heads with hydraulic deck plates from
single point to multipoint.
You may also need a LANEC200 for JD® 9000 & 9010 combines (will only run lights).
Contact Lankota for automatic Header Height control.
LAN209
50 Series 31 Pin
LAN206290 Harness Connector Clip
LAN128240 ⅜" Female Handle Valve
78 | 2016 Catalog
www.LANKOTA.com
Corn Heads
New Replacement Corn Head Gearbox
LAN508172
Replacement gearbox for JD® 40 & 90 Series corn Heads. Left and right are
interchangeable. NEW, these are NOT rebuilt. Internal components ARE FULLY
interchangeable with JD® parts. 1 YEAR WARRANTY.
FOR MOST IN-STOCK ORDERS PLACED BY
3:30 PM CST WEEKDAYS
Ph: 866.526.5682
2016 Catalog | 79
Corn Heads
LAN80987
Wedge kit fits JD® 40, 90, & 600 Series corn heads. Flattens head out by 6 ½ degrees.
PTO driveshaft kit required with this wedge kit. See page 76 for LANAR100.
LAN79944
Corn head ear saver kit. “See
through” design fits all JD® corn
heads. Slotted mounting holes for
easy adjustment.
LAN79944BLK
Fits Case IH® corn heads without
center bearing mount obstruction.
80 | 2016 Catalog
www.LANKOTA.com
Corn Heads
LANSSCRPK
Stainless steel corn hood cover plate for JD® 40, 90, & 600 Series poly corn heads.
2 plates per row. Fits outside hoods and all middle hoods.
All hardware is included. (Quantity 1 kit = 2 plates and hardware)
30" Heads Only
LANPSP100K
Stainless steel corn snout plate.
Fits JD® 90 Series, 30” Corn Heads, below serial #695300.
2 plates per row (1 left & 1 right). All hardware is included.
Order one (1) LANPSP100EK to cover both end snouts.
12 Row:
8 Row:
6 Row:
4 Row:
Order 1 LANPSP100EK and 11 LANPSP100K
LANPSP200K
Fits JD® 90 Series, 30” Corn Heads, serial #695300 & above.
12 Row: 8 Row:
6 Row:
4 Row:
Ph: 866.526.5682
2016 Catalog | 81
Corn Heads
LANPSP300K
Fits JD® 40 Series, 30” corn heads, with JD® poly update.
12 Row:
8 Row:
6 Row:
4 Row:
LANPSP600K
Fits JD® 600C Series, 30” corn heads.
18 Row:
16 Row:
12 Row:
8 Row:
6 Row:
LANPSP700K
Fits JD® 600C Series, 20” and 22” corn heads.
18 Row:
12 Row:
82 | 2016 Catalog
www.LANKOTA.com
When it comes to the protection of your header,
it’s all about accuracy, reliability and ease of use.
The features of the Headsight sensor demonstrate
the years of experience and design that have been
focused to achieve these goals.
ACCURACY
Forward Sensing | The curved shape of our arm
moves the sensing point forward as the sensor
nears the ground.
Down Pressure Spring | Keeps the sensor on the
ground even at higher operating speeds.
RELIABILITY
All Stainless Steel Construction | Corrosion
resistant and high strength resistance.
Hall Effect Sensor | Uses a magnetic field to sense
rotational angle. This eliminates moving parts and
increases sensor life.
Flexible Poly Arm | Allows the sensing arm to flex,
which absorbs most of the shock and abuse of the field, thus increasing the life of the rotating shaft.
EASE OF USE
Reverse Spring Trip | Allows the sensing arm to flip forward if the operator reverses the combine.
Oil Impregnated Bushing | The rotating shaft has an oil impregnated bushing that never needs greasing.
Electrical
Why Headsight® Sensors?
Electrical
Header Electrical Connectors
LAN560
Electrical plug utilized on single point
combines when running early model corn
heads with no electrical wiring to maintain
all routine header and computer functions.
Dummy Plug, Snap Ring & Plate
Single Point Connection
Corn Head Recognition
Single Point Connections
Dummy plug & snap ring only
Combine header recognition:
LANEC560
LANEC31QP
LANEC31QDR LANEC31QF LANEC31QRC
LANEC31QRDG Corn Head
Pick Up Head
Draper Head
Flex Head
Row Crop
Rigid Head
50 Series Connections
Electrical
Dummy plug
Combine header recognition:
LANEC550
LANEC31JP
LANEC31JDR
LANEC31JF LANEC31JRC
LANEC31JRDG
84 | 2016 Catalog
Corn Head
Pick Up Head
Draper Head
Flex Head
Row Crop
Rigid Head
www.LANKOTA.com
Electrical
Electrical Adapters
Use JD® AH128923 for connecting 9 pin combine harness to 16 pin header harness.
Use JD® AH128924 for connecting 16 pin combine harness to 9 pin header harness.
LANEC100
Adapts early model heads to JD® 50
Series combines. For single point hook up,
LANEC300 is also required.
Replaces JD® AH164791 - Corn Head
Replaces JD® AH164792 - Platform Head
LANEC200
Adapts heads with 31 pin electrical
harness to combines with 16 pin electrical
harness.
This harness will not operate any flex
system. For Header Height and Contour
Master™ contact Lankota.
Replaces JD® AH164793
LANEC302
Adapt early model corn heads without
adjustable hydraulic deck plates to
combines with single point hook up.
Electrical Adapter is 31 pin JD® 50 Series
to 31 pin single point.
You may also need the LANEC100 wiring
harness if the header electrical harness is
a 16 pin connection.
LANEC300
JD® 50 Series 31 pin adapter cable to 31
pin single point hookup (includes snap ring).
Replaces JD® AH209734
Ph: 866.526.5682
2016 Catalog | 85
Electrical
LAN209
Adapts 600 Series heads (platform or corn
heads) to 50 Series combines.
Includes retaining hardware.
Replaces JD® AH209735.
LANHPO-JD10-31J
Converts electronics of 2000-2003 JD® 900F
Series flex headers to 1999 or older JD®
combines.
For use with combines with D-A-M™ Only!
LANHPO-JD10-31Q
WHEN CHANGING HEADER TO MULTI-POINT
This kit attaches to header. Use with
LAN84206NE hydraulic kit, shown on page 64.
Converts electronics of 2004 & newer JD®
HydraFlex™ Headers to 1999 or older JD®
combines.
Eliminates the need of JD® BH84098,
BH84095 & BH84096.
LANHBO-JD10-31Q
WHEN CHANGING COMBINE TO SINGLE-POINT
This kit attaches to combine. Use with
LAN84209NE hydraulic kit, shown on page 58.
Converts electronics of 2004 & newer JD®
HydraFlex™ Headers to 1999 or older JD®
combines.
Eliminates the need of JD® BH84098,
BH84095 & BH84096.
86 | 2016 Catalog
www.LANKOTA.com
Driveshafts/Adapter
2016 LANKOTA
Photo Contest
Join us as we kick off the Lankota Photo Contest! The
contest is open to everyone over the age of 18 at the
time of entry, including professional photographers.
We are holding this contest to obtain usable and
appropriate photos that accurately portray today’s
agriculture and rural communities for future
publications and promotions. Photos are being
accepted in the following categories: All aspects
of farming (planting, harvesting, storage, and
transportation), Lankota products, and seasonal rural
photography (spring, summer, winter, and fall).
Prizes: Three photos will be selected after November
18, 2016. The winners will receive a cash prize and be
featured on our website and social
media.
First Place: $1,000
Second Place: $500
Third Place: $250
Contest Period: January 1, 2016
ends November 18, 2016.
Full contest details and official rules
can be found at www.lankota.com
Driveshaft/Adapters
Driveshafts/Adapters
LANB300
Adapts shaft driven heads to sprocket driven combines.
Adapters bolt to existing sprockets on level land combines, making it easy to switch
back and forth from new to earlier model heads.
LANB300 - Includes Hardware
LAN101B - Includes Hardware
LAN101A - (1) Ring, No Hardware
88 | 2016 Catalog
www.LANKOTA.com
Walterscheid Driveshaft Components
LAN394634
6-ribbed large
shaft shield cone
combine side
LAN394470
9-ribbed large
shaft shield cone
head side
LAN396060
Full header half of
a LAND250
Use with
LAN396059
LAN396059
Full combine half
of a LAND250
Use with
LAN396060
LAN106271
2400 Series, 1 ½” yoke
1,000 RPM replacement for
JD® SP Choppers 23 spline
LAN391345
2400 Series, 1 ⅜” yoke
1,000 RPM replacement for
Shelbourne® stripper heads
LAN399515
2400 Series, 1 ⅛” hex
compression yoke
LAN380908
2400 Series, 1 ⅜” 1,000 RPM
quick coupler
LAN390985
2400 Series, 1 ⅛” hex quick
coupler
LAN368184
2400 Series, 1 ¼” hex
compression yoke
LAN362430
2500 Series, 1 ⅜” 1000 RPM
21 spine quick coupler yoke
LAN044444
2300 Series, cross bearing kit
3” (76 mm) cap to cap
1” (27) mm diameter cap
LAN312410
2400 Series, cross bearing kit
3” (76 mm) cap to cap
1.25” (32 mm) diameter cap
LAN381908
2400 Series locking collar kit
(metal)
LAN364915
(metal)
LAN390404
(plastic)
Ph: 866.526.5682
LAN362448
2400 Series, 1 ¾” 1,000 RPM
quick coupler yoke
LAN380907
2400 Series, 1 ⅜” 540 RPM
quick coupler
2016 Catalog | 89
Weasler 35 Series Driveshaft Components
LAN9225498
Full header half of a LAND450
Use with LAN9325498
LAN9325498
Full combine half of a LAND450
Use with LAN9225498
LAN9625498
LAN9725498
Header half plastic
safety shield
Combine half
plastic safety
shield
LAN350311015
LAN350311052
1 ⅜” 540 RPM quick coupler
1 ⅜” 1,000 RPM quick coupler
LAN353511001
LAN353511013
1 ⅛” hex compression yoke
1 ¼” hex compression yoke
LAN350211186
LAN2615120
1 ⅛” hex quick coupler
Locking collar kit (metal)
LAN0310045
LAN19-11147
Cross bearing kit
3.25” cap to cap
1.25” diameter cap
Plastic shield, easy lock
repair kit.
90 | 2016 Catalog
www.LANKOTA.com
Miscellaneous Shaft Adapters
LAN106A2206
LANXB1720
1 ⅜” x 6.5” 6 spline
540 RPM stock shaft
1 ¼” round female to
1 ⅛” hex male with
locking groove 8”
overall adds 5.5” to
shaft length
LAN106A2221
LANXB540
1 ⅜” x 6.5” 21 spline
1,000 RPM stock shaft
1 ⅛” female hex to 1 ⅜”
6 spline male 540 RPM
8” overall adds 5” to
shaft length
LAN1261800
LANHS12
1 ⅛” X 4.5” hex connector
with two set screws
12” of 1 ⅛” hex shaft
with groove
Contact Lankota for additional length hex shafts.
LAN126200
LANXB1340
1 ¼” X 4.5” hex connector
with two set screws
1 ⅛” female hex to
1 ⅜” 21 spline
1,000 RPM male
8” overall adds
5” to shaft length
LAN126-2400
1 ½” X 4.5” hex connector with
two set screws
LAN16801800
LAN395831 - 2300 Series
LAN370767 - 2400 Series
1 ⅛” x 3” hex connector
Radial Pin Clutch
LANB540
1 ⅜” 540 RPM to sprocket.
3.75” overall
LANB540 (2) piece kit
LAN501 (1) piece kit
Ph: 866.526.5682
1 ⅛” hex female quick
coupler for header end.
Used on LAND350
driveshaft.
2016 Catalog | 91
Driveshafts
LAND450 (one shaft)
The LAND450 is included in the AR100, AP200 &
AP202 adapter kits.
Combine side is a 1 ⅜” 21 spline quick coupler.
Head side is a 1 ⅛” hex. Two ½” bolt secures
coupler to header shaft.
35 Series
LAND251 (one shaft)
The D251 is utilized on the late model platform
heads that drive from the left side only.
Head side is a 1 ⅛” hex. A ½” bolt secures coupler
to header shaft.
2400 Series
LANS500
LANS850
PTO supports for JD® header
adapter kit 2 pieces
PTO supports for Case IH® header
adapter kit 2 pieces
92 | 2016 Catalog
www.LANKOTA.com
LAND350 (one shaft)
The LAND350 is utilized on the early model pick
up heads. Combine side is a 1 ⅜” 21 spline quick
coupler.
Head side is a 1 ⅛” hex quick coupler. Radial pin
slip clutch. Additional springs are available for the
radial pin clutch for extra tough crop conditions.
(Page 73)
2400 Series
LAND255 (one shaft)
JD® heads to 6 spline 540 shafts.
Combine side is an 1 ⅜” 6 spline, 540 RPM quick
coupler. Head side is an 1 ⅛” hex compression
yoke.
A ½” bolt secures coupler to header shaft.
Minimum collapsed length of 33 inches.
Maximum extended length of 41.5 inches.
2400 Series
LAND475 (one shaft)
The D475 is used to drive the JD® 600 series 35'
wide platform or flex heads, which drive from the
left side only.
Combine side is an 1 ⅜” 21 spline quick coupler.
Header side is an 1 ⅛” hex coupler.
69” maximum length. This “cut to length” shaft
can also be utilized for different applications.
Also works on JD® 936D heads.
2400 Series
Ph: 866.526.5682
2016 Catalog | 93
LAND300 (one shaft)
The D300 is used to convert JD® heads to Case
IH® combines.
Head side is a 1 ⅛” hex coupler with ½” bolt that
secures coupler to shaft on back of header.
2400 Series
For combine half assembly order LAN399296
LANDX250 (one shaft)
Designed to fit 1 ¼” shaft on larger corn heads.
Head side is a 1 ¼” hex coupler with ½” bolt that
secures coupler to shaft on back of header.
Minimum collapsed length of 33 inches.
Maximum extended length of 41.5 inches.
2400 Series
LAND60X (one shaft)
Designed to fit JD® chopping heads
Head side is a 1 ½” hex shaft.
HEAVY DUTY SHAFT
2500 Series
94 | 2016 Catalog
www.LANKOTA.com
Did you know you can find instruction manuals on our website?
Go to www.LANKOTA.com, click on Products.
Search for the Product Number.
Click on Product Number.
Click on Download Setup Instructions.
Open Installation Instructions Manual.
Please contact LANKOTA for
further assistance.
Feeder House
Missing Manuals?
Feeder House
Feeder House Adapters for Level Land Combines
After updating feeder house to new hook design, combine can pick up most old
or new JD® headers.
LAN84214-N
Adapts new style platform and corn heads to JD® 50 Series and earlier combines.
Feeder House
NON-CONTOUR MASTER NARROW BODIED COMBINES.
Fits model numbers: 9400, 9410, 9450, 9500, 9510, 9550, and all STS combines.
* Bolt on hooks cannot be used on Contour Master™ combines.
LAN84214-W
Adapts new style platform and corn heads to JD® 50 Series and earlier combines.
NON-CONTOUR MASTER WIDE BODIED COMBINES.
Fits model numbers: 9600, 9610, and 9650 Walker combines
96 | 2016 Catalog
www.LANKOTA.com
Feeder House
Contour Master™ Feeder House Tilt Frame Update
LAN84212/213K
Feeder house tilt frame for STS & narrow
bodied Contour Master™ combines.
Adapts all new “hook” style headers to
50 Series and earlier combines.
NEW TOP CYLINDER PIN INCLUDED.
Fits model numbers:
9400, 9410, 9450, 9500, 9510, 9550
Walker, and all STS combines.
Will not work on 9550 Walker combines
below serial #685936.
LAN84212K
Feeder house tilt frame for wide bodied
Contour Master™ combines.
Adapts all new “hook” style headers to
50 Series and earlier models.
Fits model numbers:
9600, 9610, and 9650 Walker
Receive a $425 credit for your old frame!
MUST RETURN WITHIN 30 DAYS.
Must have a return authorization issued by Lankota.
Lankota pays freight to return frame cores.
Only JD® 00, 10, & 50 Series frames accepted, no JD® 60, 70, or “S” Series.
Ph: 866.526.5682
2016 Catalog | 97
Feeder House
Feeder House
Attaching JD® Head to Early Model Case IH® Combine
LANJD2CIH
LANJD2CIH will allow most JD® heads to
attach to Case IH® combines (2588 &
earlier).
Use the LAND300 driveshaft for this
conversion.
For Header Height and Hydraflex® control
kits, contact Lankota.
LANXB1340
LANS850
Use this adapter if head is already
equipped with driveshafts.
Storage Mounts for Case IH® driveshaft
(LAND350).
1 ⅜” 21 Spline.
1 per kit.
2 pieces per kit.
LAND300 (one shaft)
Used to convert JD® heads to Case IH®
combines.
Head side is a ⅛” hex coupler with ½” bolt
that secures coupler to shaft on header
2400 Series
98 | 2016 Catalog
www.LANKOTA.com
New Items
Grain Tank Cross Auger Clutch Shut-Off System for JD® and Case IH®
Page 103
Parts & Accessories
Parts & Accessories
Parts & Accessories
LANTBWP-12
Set of 12 galvanized plates and attaching
hardware for JD® wide spread tailboard
spreader blades.
Fits JD® part #H221045 & H221044.
Do not attach Lankota galvanized cover
plates to USED tailboard spreaders.
LANH22104X
Parts & Accessories
Kit of 6 left & 6 right galvanized steel cover
plates mounted to wide spread tailboard
spinner blades.
Expect 3 to 4 times the life of just the poly
spinner alone!
Installed Plates
Worn Blades
100 | 2016 Catalog
www.LANKOTA.com
Parts & Accessories
Guideline for determining machine’s auger size:
NON-HUR augers are 13.5” in diameter, or approximately 43” in circumference.
HUR augers are 17.0” in diameter, or approximately 54” in circumference.
LANAUGHURK
Unloading auger extension kit for JD® 60,
70, & "S" Series combines with 17” High
Unloading Rate auger (HUR).
Extends the length of factory unloading
auger by 4 feet.
Not recommended for use with the factory
28.5’ auger.
Do not use on folding augers.
LANAUG1135K
Unloading auger extension kit for JD®
60, 70, & "S" Series combines with 13.5”
standard auger (non-HUR).
auger by 3.5 feet.
LANAUG702K
Unloading auger extension kit for JD®
6620 to 9750 combines.
Also fits any CTS Combine.
auger by 3 feet.
Ph: 866.526.5682
2016 Catalog | 101
Parts & Accessories
LANAUGHURGS
Unloading auger grain saver door kit for
JD® 60, 70, and "S" Series combines with
17” High Unloading Rate auger (HUR).
Replaces the factory unloading auger
“Dribble” door.
Fits JD® factory 17” HUR auger for the
series listed above.
Also fits Lankota 17” HUR auger extension
kit (LANAUGHURK).
LANAUG1135GS
Unloading auger grain saver door kit for
JD® 60, 70 and "S" Series combines with
13.5” standard auger (non-HUR).
Replaces the factory unloading auger
“Dribble” door.
Fits JD® factory 13.5” non-HUR auger for
the series listed above.
Also fits Lankota 13.5" non-HUR auger
extension kit (LANAUG1135K).
LANAUGCIHK
3 Foot unloading auger extension kit for
Case IH® 1440 to 2388 combines.
Lankota auger extension kits allow farmers
to run wider headers and still unload on
the go.
102 | 2016 Catalog
www.LANKOTA.com
Parts & Accessories
Grain Tank Cross Auger Clutch Shut-Off System
This system will allow the operator to empty out the unloading auger without the grain
tank being empty. This system is operated by a foot switch in the cab. Extremely easy to
install. Start and stop the augers as you wish while unloading on the go!
LANUDJD1000K For use with JD® 9560W – S670 combines.
LANUDJD2000K For use with JD® S680 & S690 combines.
Now available for late model
Case IH® combines.
Contact Lankota
for specific models.
Ph: 866.526.5682
2016 Catalog | 103
Parts & Accessories
LANJDHMA
3 point hitch head mover.
Works with heads that mount to JD® and
Case IH® combines.
Works with Category II and III, three point
hitches.
Does not include cylinder.
LAN340 - 12635
Cylinder Option
Size: 3.5” bore x 7”stroke
hydraulic
(1) Heavy duty Category III
swivel socket with grease
zerk
(1) 7.5" spacer bar
Cylinder option available for use with LANJDHMA.
Can also replace top link on 3 point hitch for other attachments.
ex: snow blowers, bale forks, etc.
Features:
104 | 2016 Catalog
www.LANKOTA.com
Parts & Accessories
Combine Hitches
LANTH910
Telescoping and swiveling hitch for JD® 70 & "S" Series combines.
Telescopes 20” for easy hook up. Swivel tube has 3 positions.
Extends 5.8’ behind rear axle (retracted).
For heavy duty pintle hitch design, order LANTH910PH.
LANCTW2800
Trailer wiring harness kit for JD® 70 & “S”
Series combines.
Harness plugs directly to the machine’s
existing wiring harness.
7 way receptacle mounts to the left side
of combine rear axle & utilizes removable
extension cable alongside the hitch.
Compatible with LANTH400 & LANTH910
trailer hitches.
LANCIHTH1910
Telescoping and swiveling hitch for Case IH® 7120, 8120, 9120,
7230, 8230, 9230, 7240, 8240, and 9240 Series combines.
Telescopes 20” for easy hook up.
Swivel tube has 3 positions.
Mounts to the left side of axle.
For heavy duty pintle hitch design, order
LANCIHTH1910PH.
Ph: 866.526.5682
2016 Catalog | 105
Parts & Accessories
Position 1: Normal - Positioned for offset towing for better visibility.
1
Position 2: Centerline towing.
2
Position 3: Storage - For field operation to maximize ground clearance.
3
106 | 2016 Catalog
www.LANKOTA.com
Parts & Accessories
Combine Hitches
LANTH400
Solid hitch for JD® 70 & “S” Series
combines.
Extends 6 feet behind the rear axle.
Mounts to the left side of axle, using
existing axle bolt holes.
Includes mounting hardware.
LANTH300
Solid hitch for JD® 00, 10, 50, & 60 Series
combines.
Mounts to the left side of axle using
existing axle bolt holes.
Includes mounting hardware.
Looking for planter and seeder
mud wheels?
The four spoke rim design, combined with a high quality
bearing, assures long life with minimal down time.
Contact LANKOTA
866.526.5682
Ph: 866.526.5682
2016 Catalog | 107
Parts & Accessories
Slug Removal Tools
LANFSR10
Feed accelerator reversing tool for JD®
STS combines.
Tool easily unplugs the feed accelerator.
Kit includes 5 foot leverage bar.
8 positions to insert leverage bar for
operator convenience.
LANDBH
Discharge beater slug removal tool for all JD® "S" and STS combines
Mounts directly to drive pulley. Hardware included.
Designed to work with LANFSR10 shown above.
LANCSR9000
Conventional combine (straw walker) cylinder reversal tool with dual range separator
drives. 5 feet of leverage.
108 | 2016 Catalog
www.LANKOTA.com
Parts & Accessories
Tractor Tow Kits
JD® 9030 & 9R Series 4WD Tractors
LANRE269431 - Tow cable kit for JD® 9000 & 9020
Series 4WD tractors.
LANRE311410 - Tow cable kit for JD® 9XXXR 4WD
Tractors 2015 and newer.
LANRE315780 - Tow cable kit for JD® 9030 Series
tractors with or without front weights.
LANRE311210 - Tow cable kit for JD® 9R Series
tractors without front weights.
Cable guide kit only: LANRE311210FGK
LANRE311210W - Tow cable kit for 2014 JD® 9R
Series tractors with front weights.
JD® 9020T and 9030T Series Tractors
LANRH420T and LANRH430T
Mounts directly under front weights using existing
frame holes.
* LANRH430T also fits on JD® 9RT Series track tractors.
Do not have to remove weights to install.
Case IH® 4WD & Quad Trac Tractors
LANCIH719546006 - Tow cable kit for Case IH
Steiger® for models above serial #Z7F108001 (with
or without front weights).
LANCIHTC3708 - For Case IH® 350, 400, 450,
500, 550, and 600 Tractors with front bumper
weight, front weight frame or front grill guard.
If tractor DOES NOT have any of the above, order
LANCIHTC3708 and LANCIHTC3215.
Ph: 866.526.5682
2016 Catalog | 109
Parts & Accessories
Drawbar Pin Conversion Kits
LANRE278847
Drawbar pin conversion kit for Category 5 drawbars
• Fits JD® tractors & others with Category 5 drawbar
LANRE277559S:
LANR277873S: Pin Only
Bushing Only
LAN47477445
Drawbar Pin Conversion Kit for Power Pin™ Category 5
Drawbars
• Fits Case IH®, New Holland®, and other tractors with
Category 5 drop pin drawbar
LANCIHDPC139W:
LANR277873S: LANCIHDPC113W:
Upper Drawbar Adapter Bushing
Lower Drawbar Adapter Bushing
Pin Only
LANADCAT4/3
Drawbar pin conversion kit for Power Pin™ Category 4
drawbars
• Fits tractors with Category 4 drop pin drawbar
LANJDCAT423-103: Upper Drawbar Adapter Bushing
LANJDCAT423-102: Lower Drawbar Adapter Bushing
LANJDCAT423-104: Pin Only
110 | 2016 Catalog
www.LANKOTA.com
New Items
5 Ft. Skid Steer Snow Blower
Page 113
5 Ft. 540 RPM Three Point Mounted Snow Blower
Page 114
Red Devil Snow Blowers
9 Ft. 1,000 RPM Snow Blower
RED3K609
Size: 108” W x 42” H
Impellers: 5 Blade 36” x 12” Deep
Augers: Double 14”
PTO HP: 150-250
Chute Rotation: 270 Degrees
Weight: 2,400 lbs.
Chute Control: Standard Hydraulic
Deflector Control: Standard Hydraulic
Color: Available in Red or Green
RED93-26368 - Large 1,000 PTO
RED93-25537 - Small 1,000 PTO
Features:
Bolt on replaceable cutting edge • Chain guard • Heavy duty 44 Series PTO • Greaseable
bearings • 80 heavy auger chain • ⅜” thick paddles on impeller • Optional hydraulic 3-Point
top link • 5 blade impeller • Heavy duty, serrated augers to improve snow and ice break-up
• Oil bath gear box • PTO driveline replaces rigid shear flange shaft on the auger drive
RED2S508
Size: 96” W x 38” H
GPM: 30+
Weight: 1,325 lbs.
Color: Available in Black
Features:
100% self standing on three replaceable skid shoes • Hydraulic bypass protection and
shear bolt protection • Two stage snow blower for maximum snow throwing without back
pressure • Includes in cab electric over hydraulic chute and deflector control
112 | 2016 Catalog
www.LANKOTA.com
RED2S306
RED2S305
Size: 72” W x 27” H
Augers: Single 15”
GPM: 14-32
Weight: 600 lbs.
Size: 60” W x 27” H
GPM: 14-32
Weight: 500 lbs.
Features:
Hydraulic bypass protection and shear
bolt protection • Two stage snow blower
for maximum snow throwing without back
pressure • Includes in cab electric over
hydraulic chute and deflector control
Features:
Hydraulic bypass protection and shear
bolt protection • Two stage snow blower
for maximum snow throwing without back
pressure • Includes in cab electric over
hydraulic chute and deflector control
Ph: 866.526.5682
2016 Catalog | 113
9 Ft. 540 RPM Three Point
Mounted Snow Blower
Mounted Snow Blower
RED23509
RED23508
Size: 108” W x 38” H
PTO HP: 50-150
Weight: 1,325 lbs.
PTO Size: 44 Series
Chain Size: 60 Heavy
Size: 96” W x 38” H
PTO HP: 50-150
Weight: 1,225 lbs.
PTO Size: 44 Series
Mounted Snow Blower
Mounted Snow Blower
RED23306
RED23305
Size: 72” W x 27” H
PTO HP: 25-50
Weight: 550 lbs.
Chute Control: Standard Manual
or Hydraulic Optional
Deflector Control: Standard Manual
PTO Size: 14 Series
Size: 60” W x 27” H
PTO HP: 25-50
Weight: 500 lbs.
Chute Control: Standard Manual
Deflector Control: Standard Manual
PTO Size: 14 Series
Features:
Bolt on replaceable cutting edge • Chain guard • Greaseable bearings • Adjustable 3-point
mount • Optional hydraulic 3-point top link • Oil bath gear box
114 | 2016 Catalog
www.LANKOTA.com
LAN340-12635
Optional Hydraulic Top Link
Size: 3.5” bore x 7”stroke hydraulic
(1) Heavy duty Category III swivel socket with grease zerk
(1) 7.5" spacer bar
Features:
FOR MOST IN-STOCK ORDERS PLACED BY
3:30 PM CST WEEKDAYS
Ph: 866.526.5682
2016 Catalog | 115
LANKOTA, Inc.
270 West Park Avenue
Huron, South Dakota 57350
Phone: 605.352.4550
Toll Free: 866.526.5682
www.LANKOTA.com

2016 Lankota Catalog (41 megs)

Transcription

Similar documents

Where you come to know.

Johnny Tremain by Esther Forbes Objectives

official press kit 2015

ckc- St. LOUIS EXHIBITOR COUPONS 2016

45 Plateau Incentive Program

WWW.BARKBUSTERS.NET - Pro Accessories Australia

View Full Screen

Activity Kit - Draw Flynn`s Nose The Magistrate just can`t get Flynn`s

8`Wide Woodside Vinyl Storage Sheds

party for a living