C4 PARTS CATALOGUE

MODEL 21B-FAB
MODEL 74B
MODEL 23/25/30AR
MODEL 86AR
MODEL 21AR
MODEL 74AR
U-BOLTS
TORQUE ARMS
TOP PLATES, BOTTOM PLATES
AXLE SEATS, STABILIZERS
SPRINGS
MAINTENANCE KITS
C4 PARTS CATALOGUE
MODEL 91
The C4 catalogue covers current production suspension models
sold and predominantly operated in Canada.
The models in the C4 catalogue only includes current production suspensions. For older
models, please refer to the C2 and C1 catalogues.
Older Trailer Suspension Models:
21-5
21-1
21B-Cast (FAB Hangers)
21C
70
73
74
74A
83
99WS
102W
181
Tractor Suspension Models:
101-A
101
102
Motorhome Suspension Models: 510
1200
610
R Series (Granning)
For any other suspensions, not found in the C2, C3 and C4 catalogue, please call the
factory for information.
Reyco™ suspension models manufactured and predominantly operated in the USA:
1200*
44AR*
770*
101-F
101-A
102*
102W*
102CC*
102AR*
240AR*
21B-CAST*
79KB*
86AR*
86*
88*
21-4
21
21 SK
22B
24
25
31
41
42
45
70B
70A
87
89
99S
99W
99F
99WS
101
179
181
238
244
246
246SF
1100-3
1100-1
1100
1700-3
1700
L225
BL100
T200AX
L132
L130
* Current production model.
Granning™ suspension models manufactured in the USA:
LT80
LT120
T100AT
T300A
LT225
R-Series
T350AX
L120
L200
SPECIAL NOTE:
If you are in possession of a C3 catalogue, please discard and
replace it with a C4 catalogue.
C4 PARTS CATALOGUE
5.00 Cdn.
$
SUSPENSION INDEX
Model 91
Model 21B-FAB
Model 74B
Model 23/25/30AR
Model 86AR
Model 21AR
Model 74AR
U-Bolts - Chart “A”
Top Plates, Bottom Plates - Chart “B”
Torque Arms - Chart “C”
Springs - Chart “D”
Axle Seats, Stabilizers - Chart “E”
Maintenance Kits - Chart “F”
NOTES:
1) All suspensions come equipped with Imperial Measurement hardware.
2) All metric hardware is shown as a direct mathematical conversion and is to be used for
reference information only.
MODEL 91 & 91-1/2
FABRICATED TRAILER
SPRING SUSPENSION
FEATURES
APPLICATIONS
• 49", 60", 72" axle spread
• Vans and Reefers
• 2.50" to 17.50" mounting height
• Flatdecks
• Available in ground capacities of 18,000 to 22,000 lbs.
• Platforms
• Straddlemount and undermount hangers
• Tankers
• “No Hop” feature standard on 72" axle spread
• Grain Haulers
• Cast torque arm ends for maximum life
• Container Chassis
• 5" round, 5" x 5" square, 4" x 6" rectangular axles
• Finished Lumber
• Oversized one piece torque arm bushings
• Construction
• Large one piece equalizer bushing
• Installs on G-Rail, Channel and I-Beam frames
• Light in weight, strong in performance
MODEL 91 TRAILER SUSPENSION - 49", 60" AXLE SPACING
MODEL 91 TRAILER SUSPENSION SINGLE AXLE
1, 2
11, 12
21, 27
MODEL 91 & 91-1/2
TORQUE REQUIREMENTS / REQUIS POUR BIELLE DE RÉACTION
U-BOLT NUTS
EQUALIZER SHAFT NUT 1"
TORQUE ARM BOLT NUTS 7/8"
TORQUE ARM CLAMP NUTS 3/4"
TORQUE ARM CLAMP NUTS 5/8"
SPRING RETAINER NUTS 1/2"
THESE SETTINGS MUST BE
MAINTAINED AT ALL TIMES
FT/LBS
300/325
500/525
400/450
175/200
125/150
70/80
N.M.
410/440
680/715
540/610
240/270
170/200
95/110
ÉCROU
ÉCROU
ÉCROU
ÉCROU
ÉCROU
ÉCROU
DE BOULON EN U
DE PALONNIER, DE 1 PO
DE JAMBE DE FORCE DE 7/8 PO
DE BRIDE DE JAMBE DE FORCE 3/4 PO
DE BRIDE DE JAMBE DE FORCE DE 5/8 PO
D'ÉTRIER DE RESSORT DE 1/2 PO
CES AJUSTEMENTS DOIVENT ÊTRE
RESPECTÉS EN TOUT TEMPS
Stabilizer “NO HOP”
MODEL 91 - 49" AND 60"
TANDEM 1244.6 MM (49"), 1524 MM (60") AXLE SPACING SHOWN
ITEM
1&2
PART NUMBER
15095-01
14995-01
3
14344-01
4
T5496
5
0077-00
T5488
T1734
T4069
6
16100-01
16103-01
7
0274-01
8
0001-14
9
18854-01
18852-01
10
Variable
11 & 12
15098-01
14999-01
13
T2106
14
T1703
15
T1704
16
T1705
17
—
18
0636-11
19 & 22
10033-01
20 & 23
10092-01
21
16031-01
701631-01
24
16032-01
16034-01
25
10041-01
17152-01
26
Variable
27
10040-01
15287-01
28
Variable
29
0538-00
T5587
09229-01
09230-01
30
16439-01
31
T5544
33
10114-01
36
15638-01
DRAWING NO.
84033
83159
93281
63155
0077-00
63144#2
66186
65112
86275
86278
027401
0001-XX
90183
90181
—
84035
83162
54166
62158#1
93280
62159
—
0636-1X
62158#1
93281
86219
701631
86219
86219
73187
73187
—
73187
—
—
0538-00
63238
69108
69109
54166
62158#1
71063
85121
DESCRIPTION
front spring hanger L.H., R.H.
front spring hanger L.H., R.H.
locknut 19 mm (3/4”)
washer 19 mm (3/4”)
top u bolt plate - all axles
top u bolt plate - 127 mm (5”) round axle
top u bolt plate - 127 mm x 127 mm (5” x 5”) square axle
top u bolt plate - 101.6 mm x 152.4 mm (4” x 6”) rect. axle
equalizer & bushing assy. 1244.6 mm (49”)
equalizer & bushing assy. 1524 mm (60”)
“25 mm (1”) equalizer shaftnut”
equalizer shaft
equalizer bracket
equalizer bracket
spring
rear spring hanger L.H., R.H.
rear spring hanger L.H., R.H.
spring roller 83 mm (3 1/4”)
cap screw 13 mm x 127 mm (1/2” x 5”)
hex nut 13 mm (1/2”) “
lockwasher 13 mm (1/2”)
axle
axle seat - 127 mm (5”) round, 25 mm (1”) high
torque arm bolt
locknut 22 mm (7/8”)
adjustable torque arm assembly - front 371.6 mm (14 5/8”)
adjustable torque arm assembly - front 387.4 mm (15 1/4”)
adjustable torque arm assembly - rear 1244.6 mm (49”)
adjustable torque arm assembly - rear 1524 mm (60”)
rigid torque arm - rear 1244.6 mm (49”)”
rigid torque arm - rear 1524 mm (60”)
u bolt
rigid torque arm - front 371.6 mm (14 5/8”)
rigid torque arm - front 387.4 mm (15 1/4”)
spacer block
bottom plate - 127 mm (5”) round
bottom plate - 127 mm x 127 mm (5” x 5”) square axle
bottom plate - 127 mm x 127 mm (5” x 5”) square axle
bottom plate - 101.6 mm x 152.4 mm (4” x 6”) rect. axle
spring roller 81 mm (3 3/16”)
cap screw 13 mm x 121 mm (1/2” x 4 3/4”)
axle seat - 127 mm (5") round, 19 mm (3/4") high - rear
stabilizer 127 mm (5") round axles - rear
ADJ. TORQUE ARMS INCLUDE: 10051-01 bushing (hanger end)
09729-01 bushing (axle seat end)
15137-01 locknut 16 mm (5/8”)
15136-01 hex head cap screw 16 mm x 76 mm (5/8” x 3”)
1244.6 mm (49")
1524 mm (60")
** Effective September 5, 2000
16
16
4
4
4
4
2
2
2
2
4
2
4
4
8
8
2
4
8
8
1
REMARKS
undermount
straddlemount
inverted u bolts
conventional u bolts
conventional u bolts
inverted u bolts
includes 16095-01 bushing
includes 16095-01 bushing
undermount
straddlemount
see Chart D
undermount
straddlemount
for hangers
not furnished
for other sizes see Chart E
old style
new style **
1
1
8
1
4
4
8
4
4
4
4
2
2
see Chart A
old style
new style **
inverted u bolts
conventional u bolts
inverted u bolts
inverted u bolts
for equalizers
for equalizers
for other styles, contact factory
only if 91-1/2 NO HOP
IF 91-1/2 NO HOP (STABILIZED), SEE CHART BELOW
AXLE SPREAD
NOTE: For items marked “Variable” please contact factory.
* Verify length of rigid torque arm and front hanger
…possibility for one of two lengths.
NO. REQ.
2
TAN/TRI T/A POSITION
T/A LENGTH PART NUMBER
TAN
Rear*
508 mm (20")
10041-01
TRI
Centre
508 mm (20")
10041-01
TRI
Rear*
521 mm (20.5")
12014-01
TAN
Rear*
635 mm (25")
17152-01
TRI
Centre
635 mm (25")
17152-01
TRI
Rear*
648 mm (25.5")
17153-01
* Torque Arm attaches to stabilizer Part #15638-01
MODEL 91 1/2 TRAILER SUSPENSION 72" AXLE SPACING
MODEL 91 & 91-1/2
TORQUE REQUIREMENTS / REQUIS POUR BIELLE DE RÉACTION
U-BOLT NUTS
EQUALIZER SHAFT NUT 1"
TORQUE ARM BOLT NUTS 7/8"
TORQUE ARM CLAMP NUTS 3/4"
TORQUE ARM CLAMP NUTS 5/8"
SPRING RETAINER NUTS 1/2"
THESE SETTINGS MUST BE
MAINTAINED AT ALL TIMES
FT/LBS
300/325
500/525
400/450
175/200
125/150
70/80
N.M.
410/440
680/715
540/610
240/270
170/200
95/110
ÉCROU
ÉCROU
ÉCROU
ÉCROU
ÉCROU
ÉCROU
DE BOULON EN U
DE PALONNIER, DE 1 PO
DE JAMBE DE FORCE DE 7/8 PO
DE BRIDE DE JAMBE DE FORCE 3/4 PO
DE BRIDE DE JAMBE DE FORCE DE 5/8 PO
D'ÉTRIER DE RESSORT DE 1/2 PO
CES AJUSTEMENTS DOIVENT ÊTRE
RESPECTÉS EN TOUT TEMPS
MODEL 911/2 - 72"
TANDEM 1828.8 MM (72") AXLE SPACING SHOWN
ITEM
1&2
PART NUMBER DRAWING NO.
15095-01
84033
14995-01
83159
3
14344-01
93281
4
T5496
63155
5
T5488
63144#2
T1734
66186
T4069
65112
6
16096-01
86271
7
0274-01
27401
8
0001-14
0001-XX
9
18854-01
90183
18852-01
90181
10
Variable
-11 & 12
15098-01
84035
14999-01
83162
13
T2106
54166
14
T1703
62158#1
15
T1704
93280
16
T1705
62159
17
--18
0636-11
0636-1X
19 & 22
10033-01
62158#1
20 & 23
10092-01
93281
21
16031-01
86219
701631-01
701631
24
17001-01
86129
25
17003-01
73187
26
Variable
-27
10040-01
73187
15287-01
-28
Variable
-29
0538-00
0538-00
T5587
09230-01
T7560
65064
09229-01
69108
09230-01
69109
30
16439-01
54166
31
T5544
62158#1
33
--34
0077-00
0077-00
35
10114-01
71063
36
15638-01
85121
37
Variable
--
DESCRIPTION
front spring hanger L.H., R.H.
front spring hanger L.H., R.H.
locknut 19 mm (3/4")
washer 19 mm (3/4")
top u bolt plate - 127 mm (5") round - front
top u bolt plate - 127 mm x 127 mm (5" x 5") square - front
top u bolt plate - 101.6 mm x 152.4 mm (4" x 6") rect. - front
equalizer & bushing assy.
equalizer shaftnut 25 mm (1")
equalizer shaft
equalizer bracket
equalizer bracket
spring4
rear spring hanger L.H., R.H.
rear spring hanger L.H., R.H.
spring roller 83 mm (3 1/4")
cap screw 13 mm x 127 mm (1/2" x 5")
hex nut 13 mm (1/2")
lockwasher 13 mm (1/2")
axle
axle seat - 127 mm (5") round, 25 mm (1") high - front
torque arm bolt
locknut 22 mm (7/8")
adjustable torque arm assembly - front 371.6 mm (14 5/8”)
adjustable torque arm assembly - front 387.4 mm (15 1/4")
adjustable torque arm assembly - rear and centre 787.4 mm (31”)
rigid torque arm - rear and centre 787.4 mm (31")
u bolt4
rigid torque arm - front 371.6 mm (14 5/8")
rigid torque arm - front 387.4 mm (15 1/4")
spacer block
bottom plate - 127 mm (5") round
bottom u bolt clip - 127 mm x 127 mm (5" x 5") square axle
bottom u bot clip - 101.6 mm x 152.4 mm (4" x 6") rect. axle
bottom plate - 127 mm x 127 mm (5" x 5") square axle
bottom plate - 101.6 mm x 152.4 mm (4" x 6") rect. axle
spring roller 81 mm (3 3/16")
cap screw 13 mm x 121 mm (1/2" x 4 3/4")
equalizer guide
top plate
axle seat - 127 mm (5") round, 19 mm (3/4") high - rear
stabilizer 127 mm (5") round axles - rear
u bolt - rear
ADJ. TORQUE ARMS INCLUDE:10051-01 bushing (hanger end)
09729-01 bushing (axle seat end)
15137-01 locknut 16 mm (5/8")
15136-01 hex head cap screw 16 mm x 76 mm (5/8" x 3")
NOTE: For items marked "Variable" please contact factory.
* Verify length of rigid torque arm and front hanger… possibility for one of two lengths.
** Effective September 5, 2000
NO. REQ.
2
16
16
2
2
2
2
2
2
2
REMARKS
undermount
straddlemount
includes 16095-01 bushing
undermount
equalizer bracket
see Chart D
2
undermount
straddlemount
4
for hangers
4
8
8
2
not furnished
2
for other sizes see Chart E
8
8
1
old style
new style **
1
1
see Chart A
1
old style
new style **
4
4
inverted u bolts
8
conventional u bolts
8
comventional u bolts
4
inverted u bolts
4
inverted u bolts
4
for equalizers
4
for equalizers
not furnished
2
inverted u bolts
2
for other styles, contact factory
2
4
MODEL 21B-FAB
FABRICATED TRAILER
SPRING SUSPENSION
APPLICATIONS
FEATURES
• Vans and Reefers
• Flatdecks
• Platforms
• Tankers
• 44" to 109" axle spread
• Bottom Dumps
• 2.75" to 19" mounting height
• Rear Dumps
• Available in ground capacities of 18,000 to 26,000 lbs.
• Finished Lumber
• Cast axle clamp group for superior strength
• Raw Lumber
• Easy to install replacement wearpads
• Steel
• Cast torque arm ends for maximum life
• Construction
• Easily replaceable 2 piece oversized bushings
• Reinforcement plates available for front hangers
• 5" round, 5" x 5" square, 4" x 6" rectangular, 5-3/4" round axles
MODEL 21B-FAB TRAILER SUSPENSION 44" AXLE SPACING
MODEL 21B-FAB
FT/LBS
300/325
250/275
575/625
140/160
125/150
70/80
N.M.
410/440
340/375
780/850
220/275
170/200
95/110
ÉCROU
ÉCROU
ÉCROU
ÉCROU
ÉCROU
ÉCROU
CES AJUSTEMENTS DOIVENT ÊTRE
RESPECTÉS EN TOUT TEMPS
DE BOULON EN U
DE BOULON EN U
DE PALONNIER, DE 1-1/4 PO
DE JAMBE DE FORCE DE 1 PO
DE BRIDE DE JAMBE DE FORCE DE 5/8 PO
D'ÉTRIER DE RESSORT DE 1/2 PO
TORQUE REQUIREMENTS / REQUIS POUR BIELLE DE RÉACTION
U-BOLT NUTS-STEEL SPRINGS
U-BOLT NUTS-COMPOSITE SPRINGS
EQUALIZER SHAFT NUT 1-1/4"
TORQUE ARM BOLT NUTS 1"
TORQUE ARM CLAMP NUTS 5/8"
SPRING RETAINER NUTS 1/2"
THESE SETTINGS MUST BE
MAINTAINED AT ALL TIMES
MODEL 21B-FAB - 44"
TANDEM 1117.6 MM (44") AXLE SPACING SHOWN
ITEM PART NUMBER DRAWING NO.
1
09832-01
70136
2
08595-01
67207
3
14684-01
82222
4
21693-01
95014
5
14682-01
82220
6
14683-01
82221
7
08914-01
93281
8
T2106
54166
9
T5544
62158#1
10
T1704
93280
11
T1705
62159
12
0077-00
0077-00
T5488
63144#2
T4069
65112
T1734
66186
13
09730-01
70116
08757-01
68237
T7650
—
07980-01
66084
08060-01
67002
10114-01
71063
09103-01
68247
10292-01
71180
14
Various
15
Various
16
14344-01
93281
17
T5496
63155
18
T5492
62158#1
19
T5495
93281
20
T2224
93403#3
21
T5493
63151
22
08567-01
65095
T7635
65095
23
15171-01
84108
15172-01
84108
24
0538-00
0538-00
09230-01
69109
09229-01
69108
T5727
63293
T5727
63293
27
T7716
66008
T7654
65100
T7655
65101
28
16810-00
94031
DESCRIPTION
NO. REQ.
front hanger L.H., R.H.
2
rear hanger L.H., R.H.
2
equalizer bracket
2
equalizer assembly - 1117.6 mm (44”)
2
equalizer bushing
2
equalizer shaft
2
equalizer shaft nut
2
spring roller
6
cap screw 13 mm x 121 mm (1/2” x 4-3/4”)
6
hex nut 13 mm (1/2”)
6
lockwasher 13 mm (1/2”)
6
top plate - all axles
4
top plate - 127 mm (5”) round
4
top plate - 101.6 mm x 152.4 mm (4” x 6”) axle
4
top plate - 127 mm x 127 mm (5” x 5”) axle
4
axle seat - 127 mm (5") round
4
axle seat - 127 mm (5”) round
4
axle seat - 127 mm (5”) round
4
axle seat - 101.6 mm x 152.4 mm (4” x 6”) axle
4
axle seat - 127 mm x 127 mm (5” x 5”) axle
4
axle seat - 127 mm x 127 mm (5” x 5”) axle
4
axle seat - 127 mm (5”) round, 19 mm (3/4”) high
4
axle seat - 1
4
spring
4
u bolts
8
u bolt nut 19 mm (3/4”)
16
u bolt washer 19 mm (3/4”)
16
torque arm bolt
8
locknut
8
torque arm compression washer
16
torque arm bushing
16
torque arm assembly - front-rigid-1117.6 mm (44”) only
1
torque arm assembly - rear-rigid-1117.6 mm (44”) only
1
torque arm assembly - front-adj.-1117.6 mm (44”) only
1
torque arm assembly - rear-adj.-1117.6 mm (44”) only
1
bottom plate - 127 mm (5”) round
4
bottom plate - 101.6 mm x 152.4 mm (4” x 6”) axle
4
bottom plate - 127 mm x 127 mm (5” x 5”) axle
4
bottom plate - 127 mm (5”) round underslung
4
bottom plate - 127 mm x 127 mm (5” x 5”) underslung
4
spacer block 25 mm (1”)
spacer block 38 mm (1-1/2”)
spacer block 51 mm (2”)
spring liner - galvanized
8
* Use: TK-16657 to Rebush (1) Equalizer
Steel Springs available for 44”:
T7297 (Mono Leaf)
21667 (8 Leaf)
21668 (7 Leaf)
REMARKS
undermount - fabricated
undermount - fabricated
undermount - fabricated
includes 14682-01 bushing
inverted u bolts
conventional u bolts
conventional u bolts
conventional u bolts
19 mm (3/4”) high
82.6 mm (3 1/4”) high
19 mm (3/4”) high
19 mm (3/4”) high
82.6 mm (3 1/4”) high
underslung - no T/A connection
underslung - no T/A connection
underslung - no T/A connection
see Chart D
see Chart A
14345-01 - 22 mm (7/8”)
T7292 - 22 mm (7/8”)
349.3 mm (13 3/4”)
412.8 mm (16 1/4”)
349.3 mm (13 3/4”)
412.8 mm (16 1/4”)
inverted u bolts
inverted u bolts
inverted u bolts
inverted u bolts
inverted u bolts
centres
centres
centres
centres
with 1 & 3 leaf springs
MODEL 21B-FAB TRAILER SUSPENSION 50", 54", 60", 63 1/2", 65 1/2" AXLE
MODEL 21B-FAB
FT/LBS
300/325
250/275
575/625
140/160
125/150
70/80
N.M.
410/440
340/375
780/850
220/275
170/200
95/110
ÉCROU
ÉCROU
ÉCROU
ÉCROU
ÉCROU
ÉCROU
CES AJUSTEMENTS DOIVENT ÊTRE
RESPECTÉS EN TOUT TEMPS
DE BOULON EN U
DE BOULON EN U
DE PALONNIER, DE 1-1/4 PO
DE JAMBE DE FORCE DE 1 PO
DE BRIDE DE JAMBE DE FORCE DE 5/8 PO
D'ÉTRIER DE RESSORT DE 1/2 PO
TORQUE REQUIREMENTS / REQUIS POUR BIELLE DE RÉACTION
U-BOLT NUTS-STEEL SPRINGS
U-BOLT NUTS-COMPOSITE SPRINGS
EQUALIZER SHAFT NUT 1-1/4"
TORQUE ARM BOLT NUTS 1"
TORQUE ARM CLAMP NUTS 5/8"
SPRING RETAINER NUTS 1/2"
THESE SETTINGS MUST BE
MAINTAINED AT ALL TIMES
MODEL 21B-FAB - 50", 54", 60", 63-1/2", 65-1/2"
TANDEM 1270 MM (50"), 1371.6 (54"), 1524 MM (60"),
1612.9 (63 1/2"), 1663.7 MM (65 1/2") AXLE SPACING SHOWN
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
PART NUMBER DRAWING NO.
09832-01
70136
08595-01
67207
14684-01
82222
14689-01
82227
14693-01
82231
14696-01
82234
14700-01
82238
14700-01
82238
14682-01
82220
14683-01
82221
08914-01
93281
T2106
54166
T5544
62158#1
T1704
93280
T1705
62159
0077-00
0077-00
T5488
63144#2
09987-01
65112
T1734
66186
09730-01
70116
08757-01
68237
T7650
—
07980-01
66084
08060-01
67002
10114-01
71063
09103-01
68247
10292-01
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Various
Various
14344-01
T5496
T5492
T5495
T2224
T5493
T7635
15286-01
10183-01
09686-01
10973-01
08650-01
15172-01
15173-01
15354-01
15176-01
15177-01
15177-01
0538-00
09230-01
09229-01
T5727
T5727
T5481
08061-01
T5587
T7560
T7716
T7654
T7655
16810-00
71180
93281
63155
62158#1
93281
93403#3
63151
65095
65095
65095
65095
65095
65095
84108
84108
84108
84108
84108
84108
0538-00
69109
69108
63293
63293
63135
67003
65064
63238
66008
65100
65101
94031
DESCRIPTION
front hanger L.H., R.H.
rear hanger L.H., R.H.
equalizer bracket
equalizer assembly - 1371.6 mm (54”)*
equalizer assembly - 1371.6 mm (54”)*
equalizer assembly - 1524 mm (60”)*
equalizer assembly - 1612.9 mm (63-1/2”)
equalizer assembly - 1663.7 mm (65-1/2”)
equalizer bushing
equalizer shaft
equalizer shaft nut
spring roller
cap screw 13 mm x 121 mm (1/2” x 4-3/4”)
hex nut 13 mm (1/2”)
lockwasher 13 mm (1/2”)
top plate - all axles
top plate - 127 mm (5”) round
top plate - 101.6 mm x 152.4 mm (4” x 6”) axle
top plate - 127 mm x 127 mm (5” x 5”) axle
axle seat - 127 mm (5”) round
axle seat - 127 mm (5”) round
axle seat - 101.6 mm x 152.4 mm (4” x 6”) axle
axle seat - 127 mm x 127 mm (5” x 5”) axle
axle seat - 127 mm x 127 mm (5” x 5”) axle
axle seat - 127 mm (5”) round, 19 mm (3/4”) high
axle seat - 127 mm x 127 mm (5” x 5”) axle,
20 mm (13/16”) high
axle seat - 101.6 mm x 152.4 mm (4” x 6”) axle,
19 mm (3/4”) high
spring
u bolts
u bolt nut 19 mm (3/4”)
u bolt washer 19 mm (3/4”)
torque arm bolt
locknut
torque arm compression washer
torque arm bushing
torque arm assembly - front-rigid-all†
torque arm assembly - rear-rigid-1270 mm (50”)
torque arm assembly - rear-rigid-1371.6 mm (54”)
torque arm assembly - rear-rigid-1524 mm (60”)
torque arm assembly - rear-rigid-1612.9 mm (63 1/2”)
torque arm assembly - rear-rigid-1663.7 mm (65 1/2”)
torque arm assembly - front-adj.-all
torque arm assembly - rear-adj.-1270 mm (50”)
torque arm assembly - rear-adj.-1371.6 mm (54”)
torque arm assembly - rear-adj.-1524 mm (60”)
torque arm assembly - rear-adj.-1612.9 mm (63 1/2”)
torque arm assembly - rear-adj.-1663.7 mm (65 1/2”)
bottom plate - 127 mm (5”) round
bottom plate - 101.6 mm x 152.4 mm (4” x 6”) axle
bottom plate - 127 mm x 127 mm (5” x 5”) axle
bottom plate - 127 mm (5”) round underslung
bottom plate - 127 mm x 127 mm (5” x 5”) underslung
stabilizer 127 mm (5”) round
stabilizer 127 mm x 127 mm (5” x 5”) axle
bottom u bolt clip - 101.6 mm x 152.4 mm (4” x 6”) axle
bottom u bolt clip - 127 mm x 127 mm (5” x 5”) axle
spacer block 25 mm (1”)”
spacer block 38 mm (1-1/2”)
spacer block 51 mm (2”)
spring liner - galvanized
NO. REQ.
2
2
2
2
2
2
2
2
2
2
2
6
REMARKS
undermount - fabricated
undermount - fabricated
undermount - fabricated
includes 14682-01 bushing
includes 14682-01 bushing
includes 14682-01 bushing
includes 14682-01 bushing
includes 14682-01 bushing
6
6
4
4
4
4
4
4
4
4
4
4
inverted u bolts
conventional u bolts
conventional u bolts
conventional u bolts
19 mm (3/4”) high
82.6 mm (3 1/4”) high
19 mm (3/4”) high
19 mm (3/4”) high
82.6 mm (3 1/4”) high
underslung - no T/A connection
4
underslung - no T/A connection
4
4
8
16
16
8
8
16
16
1
1
1
1
1
1
1
1
1
1
1
1
4
4
4
4
4
underslung - no T/A connection
see Chart D
see Chart A
14345-01 - 22 mm (7/8”)
T7292 - 22 mm (7/8”)
8
8
412.8 mm (16 1/4”) centres
492.3 mm (19 3/8”) centres
547.6 mm (21 9/16”) centres
635 mm (25”) centres
666.8 mm (26 1/4”) centres
692.2 mm (27 1/4”) centres
412.8 mm (16 1/4”) centres
492.3 mm (19 3/8”) centres
547.6 mm (21 9/16”) centres
635 mm (25”) centres
666.8 mm (26 1/4”) centres
692.2 mm (27 1/4”) centres
inverted u bolts
inverted u bolts
inverted u bolts
inverted u bolts
inverted u bolts
see Chart E
see Chart E
conventional u bolts
conventional u bolts
8
with 1 & 3 leaf springs
* Use: TK-16657 to Rebush (1) Equalizer
† Use: T7633 Rigid Torque Arm, Front - 400 mm (15 3/4”) Centres When Using T7452 Springs in 1270 mm (50”) Axle Spacing
MODEL 21B-FAB TRAILER SUSPENSION TANDEM 72", 97", 109" AXLE SPACING
MODEL 21B-FAB
FT/LBS
300/325
250/275
575/625
140/160
125/150
70/80
N.M.
410/440
340/375
780/850
220/275
170/200
95/110
ÉCROU
ÉCROU
ÉCROU
ÉCROU
ÉCROU
ÉCROU
CES AJUSTEMENTS DOIVENT ÊTRE
RESPECTÉS EN TOUT TEMPS
DE BOULON EN U
DE BOULON EN U
DE PALONNIER, DE 1-1/4 PO
DE JAMBE DE FORCE DE 1 PO
DE BRIDE DE JAMBE DE FORCE DE 5/8 PO
D'ÉTRIER DE RESSORT DE 1/2 PO
TORQUE REQUIREMENTS / REQUIS POUR BIELLE DE RÉACTION
U-BOLT NUTS-STEEL SPRINGS
U-BOLT NUTS-COMPOSITE SPRINGS
EQUALIZER SHAFT NUT 1-1/4"
TORQUE ARM BOLT NUTS 1"
TORQUE ARM CLAMP NUTS 5/8"
SPRING RETAINER NUTS 1/2"
THESE SETTINGS MUST BE
MAINTAINED AT ALL TIMES
MODEL 21B-FAB - 72", 97", 109"
TANDEM 1828.8 MM (72"), 2463.8 MM (97"), 2768.6 MM (109") AXLE SPACING SHOWN
ITEM
PART NUMBER
1
2
3
4
5
09832-01
08595-01
14688-01
11610-01
14763-01
14764-01
14765-01
14682-01
14683-01
08914-01
T2106
T5544
T1704
T1705
0077-00
T5488
09987-01
T1734
09730-01
08757-01
T7650
07980-01
08060-01
10114-01
09103-01
70136
67207
82226
74070#2
83007
83008
83009
82220
82221
93281
54166
62158#1
93280
62159
0077-00
63144#2
71050
66186
70116
68237
—
66084
67002
71063
63247
10292-01
71180
Various
Various
14344-01
T5496
T5492
T5495
T2224
T5493
T7635
15286-01
15172-01
15173-01
0538-00
09230-01
09229-01
T5727
T5727
T5481
08061-01
T7560
T5587
T7716
T7654
T7655
16810-00
—
—
93281
63155
62158#1
93281
93403#3
63151
65095
65095
84108
84108
0538-00
69109
69108
63293
63294
63135
67003
65064
63238
66008
65100
65101
94031
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
DRAWING NO. DESCRIPTION
front hanger L.H., R.H.
rear hanger L.H., R.H.
equalizer bracket
torque arm attachment bracket
equalizer assembly - 1828.8 mm (72”)*”
equalizer assembly - 2463.8 mm (97”)*
equalizer assembly - 2768.6 mm (109”)
equalizer bushing
equalizer shaft
equalizer shaft nut
spring roller
cap screw 13 mm x 121 mm (1/2” x 4-3/4”)
hex nut 13 mm (1/2”)
lockwasher 13 mm (1/2”)
top plate - all axles
top plate - 127 mm (5”) round
top plate - 101.6 mm x 152.4 mm (4” x 6”) axle
top plate - 127 mm x 127 mm (5” x 5”) axle
axle seat - 127 mm (5”) round
axle seat - 127 mm (5”) round
axle seat - 101.6 mm x 152.4 mm (4” x 6”) axle
axle seat - 127 mm x 127 mm (5” x 5”) axle
axle seat - 127 mm x 127 mm (5” x 5”) axle
axle seat - 127 mm (5”) round, 19 mm (3/4”) high
axle seat - 127 mm x 127 mm (5” x 5”) axle,
19.8 mm (13/16”) high
axle seat - 101.6 mm x 152.4 mm (4” x 6”) axle,
19 mm (3/4”) high
spring
u bolts
u bolt nut 19 mm (3/4”)
u bolt washer 19 mm (3/4”)
torque arm bolt
locknut
compression washer
torque arm bushing
torque arm assembly - front-rigid
torque arm assembly - rear-rigid
torque arm assembly - front-adj.-all
torque arm assembly - rear-adj.
bottom plate - 127 mm (5”) round
bottom plate - 101.6 mm x 152.4 mm (4” x 6”) axle
bottom plate - 127 mm x 127 mm (5” x 5”) axle
bottom plate - 127 mm (5”) round underslung
bottom plate - 127 mm x 127 mm (5” x 5”) underslung
stabilizer 127 mm (5”) round
stabilizer 127 mm x 127 mm (5” x 5”) axle
bottom u bolt clip - 101.6 mm x 152.4 mm (4” x 6”) axle
bottom u bolt clip - 127 mm x 127 mm (5” x 5”) axle
spacer block 25 mm (1”)
spacer block 38 mm (1-1/2”)
spacer block 51 mm (2”)
spring liner - galvanized
* Use: TK16657 to Rebush (1) Equalizer (All Axle Centres)
TK16658 to Rebush (1) End of Torque Arm (All Axle Centres)
TK7319 to Rebush (4) Torque Arms (Tandem) (All Axle Centres)
NO. REQ.
REMARKS
2
2
2
2
2
2
2
2
2
2
6
6
6
6
4
4
4
4
4
4
4
4
4
4
undermount - fabricated
undermount - fabricated
undermount - fabricated
undermount - fabricated
includes 14682-01 bushing
includes 14682-01 bushing
includes 14682-01 bushing
4
underslung - no T/A connection
4
4
8
16
16
8
8
8
16
1
1
1
1
4
4
4
4
4
underslung - no T/A connection
see Chart D
see Chart A
14345-01 - 22 mm (7/8”)
T7292 - 22 mm (7/8”)
inverted u bolts
conventional u bolts
conventional u bolts
conventional u bolts
19 mm (3/4”) high
82.6 mm (3 1/4”) high
19 mm (3/4”) high
19 mm (3/4”) high
82.6 mm (3 1/4”) high
underslung - no T/A connection
8
8
412.8 mm (16 1/4”)
492.5 mm (19 3/8”)
412.8 mm (16 1/4”)
492.5 mm (19 3/8”)
inverted u bolts
inverted u bolts
inverted u bolts
inverted u bolts
inverted u bolts
see Chart E
see Chart E
conventional u bolts
conventional u bolts
centres
centres
centres
centres
8
with 1 & 3 leaf springs
MODEL 74B
FABRICATED TRAILER
SPRING SUSPENSION
FEATURES
• Large rubber bushings in all pivot joints
• High tensile steel wear pads
APPLICATIONS
• Raw Lumber
• Forestry
• Precision fabricated hangers
• Timber
• 4" wide springs
• Construction
• 50" to 109" axle spread
• Rear Dump
• 16.5" and 17" mounting height
• Steel
• Cast steel axle seat
• Severe Off-Road
• Cast torque arm ends for maximum life
• 5" round, 5-3/4" round axles
MODEL 74B TRAILER SUSPENSION TANDEM 50", 54" 60" AXLE SPACING
MODEL 74B
FT/LBS
300/325
575/625
600/625
175/200
70/80
N.M.
410/440
780/850
815/850
240/270
95/110
DE BOULON EN U
DE PALONNIER
DE JAMBE DE FORCE DE
DE BRIDE DE JAMBE DE FORCE
D'ÉTRIER DE RESSORT DE 1/2 PO
CES AJUSTEMENTS DOIVENT ÊTRE
RESPECTÉS EN TOUT TEMPS
ÉCROU
ÉCROU
ÉCROU
ÉCROU
ÉCROU
TORQUE REQUIREMENTS / REQUIS POUR BIELLE DE RÉACTION
U-BOLT NUTS
EQUALIZER SHAFT NUT
TORQUE ARM BOLT NUTS
TORQUE ARM CLAMP NUTS
SPRING RETAINER NUTS 1/2"
THESE SETTINGS MUST BE
MAINTAINED AT ALL TIMES
MODEL 74B - 50", 54", 60"
TANDEM 1270 MM (50"), 1371.6 MM (54"), 1524 MM (60")
AXLE SPACING SHOWN
ITEM
1
2
3
4&5
6
7
8
9
10
11
12
13
14*
15*
17
19
20
21
22
23
24
25
26
27
PART NUMBER
16671-01
13814-01
16672-01
See Below
10949-01
08914-01
08513-01
08950-01
14066-01
T7292
13856-01
13798-01
14527-01
15751-01
15752-01
See Below
See Below
15737-01
T5492
T5495
13817-01
13818-01
T1704
T1705
11010-01
T5770
12916-01
AXLE
SPACING
DRAWING NO.
88006
80193
88007
72134
93281
68050
69040
81088
93403#2
80230
80177
57248
86052
86053
NO. REQ.
2
2
2
2
2
2
8
8
16
16
4
4
4
4
4
86046
62158#1
93281
62158#2
54166
93280
62159
93281
93403#2
62158#2
2
8
8
6
6
6
6
8
8
8
DESCRIPTION
front spring hanger - left/right
rear spring hanger - left/right
equalizer bracket
equalizer and bushing assembly
equalizer shaft
equalizer shaft nut
u bolt 22 mm x 127 mm x 330 mm (7/8” x 5” x 13”)
u bolt 22 mm x 146 mm x 343 mm (7/8” x 5 3/4” x 13 1/2”)
locknut 22 mm (7/8”)
flat washer 232 mm (7/8”)
spring - 101.6 mm (4") wide
top u bolt plate - 127 mm (5”) round axle
top u bolt
plate - 146 mm (5 3/4”) round axle
axle seat - 127 mm (5”) round axle
axle seat - 146 mm (5 3/4”) round axle
adjustable torque arm assembly
rigid torque arm
torque arm bushing
torque arm bolt 25 mm x 171.5 mm (1” x 6 3/4”)
locknut 25 mm (1”)
cap screw 13 mm x 146 mm (1/2” x 5 3/4”)
spring roller
hex nut 13 mm (1/2”)
lockwasher 13 mm (1/2”)
self-locking nut
structural washer 25 mm (1”)
hex head cap screw
TORQUE ARMS
REAR RIGID*
REAR ADJ.*
EQUALIZER ASSEMBLY
INCLUDES 13805-01 BUSHING
1270 mm (50”)
17532-01 489 mm (19 1/4”)
17534-01
17512-01
1371.6 mm (54”)
16588-01 539.8 mm (21 1/4”)
16596-01
13806-01
1524 mm (60”)
16589-01 622.3 mm (24 1/2”)
16597-01
14135-01
FRONT RIGID*
FRONT ADJ.*
16585-01 362 mm (14 1/4”)
16595-01
* Includes 15737-01 bushings. Use 12916-01 cap screw and 11010-01 locknut to clamp adjustable torque arm ends.
MODEL 74B TRAILER SUSPENSION 72" - 109" AXLE SPACING
MODEL 74B
FT/LBS
300/325
575/625
600/625
175/200
70/80
N.M.
410/440
780/850
815/850
240/270
95/110
DE BOULON EN U
DE PALONNIER
DE JAMBE DE FORCE DE
DE BRIDE DE JAMBE DE FORCE
D'ÉTRIER DE RESSORT DE 1/2 PO
CES AJUSTEMENTS DOIVENT ÊTRE
RESPECTÉS EN TOUT TEMPS
ÉCROU
ÉCROU
ÉCROU
ÉCROU
ÉCROU
TORQUE REQUIREMENTS / REQUIS POUR BIELLE DE RÉACTION
U-BOLT NUTS
EQUALIZER SHAFT NUT
TORQUE ARM BOLT NUTS
TORQUE ARM CLAMP NUTS
SPRING RETAINER NUTS 1/2"
THESE SETTINGS MUST BE
MAINTAINED AT ALL TIMES
MODEL 74B - 72", 97", 109"
TANDEM 1828.8 MM (72"), 1955.8 MM (97"), 2563.8 MM (109")
AXLE SPACING SHOWN
ITEM
1
2
3
4
5
6&7
8
9
10
11
12
13
14
15
16
17
20
23
24
25
26
27
28
29
PART NUMBER
16671-01
13814-01
15735-01
16673-01
13861-01
See Below
10949-01
08914-01
08513-01
08950-01
14066-01
T7292
13856-01
13798-01
14527-01
15751-01
15752-01
See Below
See Below
15737-01
13817-01
13818-01
T1704
T1705
T5770
11010-01
12916-01
AXLE
SPACING
DRAWING NO.
88006
80193
86044
88008
80237
72134
93281
68050
69040
81088
93403#2
80230
80177
57248
86052
86053
NO. REQ.
2
2
2
2
2
2
2
2
8
8
16
16
4
4
4
4
4
86046
62158#2
54166
93280
62159
93403#2
93281
62158#2
2
6
6
6
6
8
8
8
DESCRIPTION
front spring hanger - left/right
rear spring hanger - left/right
equalizer bracket
torque arm attachment bracket
equalizer guide bracket
equalizer and bushing assembly
equalizer shaft
equalizer shaft nut
u bolt 22 mm x 127 mm x 330 mm (7/8” x 5” x 13”)
u bolt 22 mm x 146 mm x 343 mm (7/8” x 5 3/4” x 13 1/2”)
locknut 22 mm (7/8”)
u bolt flat washer 22 mm (7/8”)
spring - 101.6 mm (4") wide
top u bolt plate - 127 mm (5”) round axle
top u bolt plate - 146 mm (5 3/4”) round axle
axle seat - 127 mm (5”) round axle
axle seat - 146 mm (5 3/4”) round axle
adjustable torque arm assembly
rigid torque arm
torque arm bushing
cap screw 13 mm x 146 mm (1/2” x 5 3/4”)
spring roller
hex nut 13 mm (1/2”)
lockwasher 13 mm (1/2”)
structural washer 25 mm (1”)
self-locking nut
hex head cap screw
TORQUE ARMSEQUALIZER ASSEMBLY
REAR RIGID*
REAR ADJ.*
INCLUDES 13805-01 BUSHING
1828.8 mm (72”)
16586-01 514.4 mm (20 1/4”)
16596-01
13909-01
1955.8 mm (77”)
16587-01 533.4 mm (21”)
16596-01
15227-01
2463.8 mm (97”)
16587-01 533.4 mm (21”)
16596-01
15724-01
2768.6 mm (109”)
16587-01 533.4 mm (21”)
16596-01
15720-01
FRONT RIGID*
FRONT ADJ.*
16585-01 362 mm
(14 1/4”)
All
16595-01
*Includes 15737-01 bushings. Use 12916-01 cap screw and 11010-01 locknut to clamp adjustable torque arm ends.
MODELS
23AR • 25AR • 30AR
TRAILER AIR RIDE
SUSPENSION
REY-ALIGN
APPLICATIONS
FEATURES
• Vans and Reefers
• Flatdecks
• 6.5" to 17" mounting heights
• Platforms
• Available in ground capacities of 23,000; 25,000
and 30,000 lbs./axle
• Tankers
• Weld-on and Bolt-on hangers
• Up to 8" of axle travel
• Forestry
• Drop Platforms
• Lightweight with no sacrifice in strength
• Lowbeds
• Topmount and Underslung available
• Bottom Dumps
• Huck bolted and pre-assembled
• Rear Dumps
• Liftable
• Finished Lumber
• REY-ALIGN™… “TRUE” One-Person alignment
• Raw Lumber
• 6" pivot bushing
• Steel Haulers
• Increased beam to axle surface area
• Car Carriers
• Wider axle connection
• Better geometry through air spring selection
• Twice the support at axle connection
• Re-alignment requires little/no weld cleaning
• Industry standard components
2, 3
4
16
1
7
17, 18, 19
23ARTU - 25ARTU - 30ARTU TRAILER SUSPENSION
8, 9
5, 6
10, 11, 12, 13, 14, 15, 20, 21
TOP MOUNT SUSPENSION
PARTS AND MAINTENANCE
ITEM #
1
2
3
4
5, 6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PART #
See chart next page
24539-01
11010-01
See chart next page
Call Factory
See chart next page
See chart next page
23673-01
23656-01
23948-01
24403-01
23952-01
23674-01
23432-01
23427-01
23939-01
23423-01
20688-02
24358-01
K701163-1
K701163-2
K701311
DESCRIPTION
PER SUSP.
Air Spring
2
Shock Absorber Bolt
4
Shock Absorber Nut
4
Shock Absorber
2
Shock Absorber Replacement Kit
1
Trailing Beam (left and right)
2
Hanger (left and right)
2
REY-ALIGN Adjustment Washer
2
Flange Washer (opposite side of hanger)
2
Pivot Shaft
2
Pivot Shaft Nut
4
Disc Spring Washer for Pivot Shaft
4
Pivot Shaft Sleeve
2
Sleeve Cover
2
Beam Spacers
4
U-Bolt / Axle Spacer
4
U-Bolt
4
U-Bolt nut
8
U-Bolt Washer
8
Re-Bush Kit for ONE Beam
Re-Bush Kit for TWO Beams
Re-Bush Kit for ONE Beam
-
REMARKS
Includes Shocks/Hardware
Includes Bushing #23421-01
Alignment Bolt #24398-01
If REY-ALIGN™
If REY-ALIGN™
If REY-ALIGN™
If REY-ALIGN™
If REY-ALIGN™
If REY-ALIGN™
If REY-ALIGN™
If REY-ALIGN™
If HUCK™ Bolted
** Huck Bolt clamp system shown in illustration….REY-ALIGN system shown in chart.
23ARTU - 25ARTU - 30ARTU TRAILING BEAM
23ARTU
RIDE
HEIGHT
14"
15"
16"
17"
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
BEAM
23759-01
23759-02
23759-01
23759-02
23759-01
23759-02
23759-01
23759-02
AIR
SPRING
23433-01
23433-01
23433-01
23433-01
23433-01
23433-01
23433-01
23433-01
HUCK BOLT
HANGER
23960-211
23960-21
23960-311
23960-31
23960-411
23960-41
23960-411
23960-41
REY-ALIGN
HANGER
24001-211
24001-22
24001-311
24001-32
24001-411
24001-42
24001-411
24001-42
UPPER SHOCK
ASSEMBLY
23662-01
23662-02
23662-01
23662-02
23986-01
23986-02
24777-01
24777-02
REY-ALIGN
HANGER
24001-11
24001-12
24001-21
24001-22
24001-211
24001-22
24001-311
24001-32
24001-411
24001-42
24001-511
24001-52
UPPER SHOCK
ASSEMBLY
25044-01
25044-02
25026-01
25026-02
24763-01
24763-02
25045-01
25045-02
25033-01
25033-02
25037-01
25037-02
SHOCK
23523-01
23523-01
23523-01
23523-01
23523-01
23523-01
23523-01
23523-01
25ARTU
RIDE
HEIGHT
12"
13"
14"
15"
16"
17"
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
BEAM
BAG
23968-01
23968-02
23968-01
23968-02
23968-01
23968-02
23968-01
23968-02
23968-01
23968-02
23968-01
23968-02
23521-02
23521-02
23521-02
23521-02
23521-02
23521-02
23521-02
23521-02
23521-02
23521-02
23521-02
23521-02
HUCK BOLT
HANGER
23960-11
23960-11
23960-21
23960-21
23960-211
23960-21
23960-311
23960-31
23960-411
23960-41
23960-511
23960-51
SHOCK
24392-01
24392-01
24392-01
24392-01
24392-01
24392-01
24392-01
24392-01
24392-01
24392-01
24392-01
24392-01
30ARTU
RIDE
HEIGHT
15"
16"
17"
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
BEAM
BAG
23554-01
23554-02
23554-01
23554-02
23554-01
23554-02
23631-01
23631-01
23631-01
23631-01
23631-01
23631-01
HUCK BOLT
HANGER
23960-311
23960-31
23960-411
23960-41
23960-511
23960-51
REY-ALIGN
HANGER
24001-311
24001-32
24001-411
24001-42
24001-511
24001-52
UPPER SHOCK
ASSEMBLY
25038-01
25038-02
25049-01
25049-02
25041-01
25041-02
SHOCK
23524-01
23524-01
23524-01
23524-01
23524-01
23524-01
MODEL 23AR/25AR/30AR
TORQUE REQUIREMENTS / REQUIS POUR BIELLE DE RÉACTION
U-BOLT NUTS - 7/8"
SHOCK ABSORBER NUT - 3/4"
AIR SPRING BOLT - 1/2"
UPPER AIR SPRING NUT - 3/4"
AIR SPRING PLUG - 1/4"
HEIGHT CONTROL LINK BOLT
REPLACEMENT NUT for Huck Bolt
LIFT AXLE AIR SPRING NUT-3/8"
REY-ALIGN™ CLAMP BOLT-7/8"
ALIGNMENT ADJUSTMENT BOLT
THESE SETTINGS MUST BE
MAINTAINED AT ALL TIMES
FT/LBS
475/525
150/175
25/30
40/45
8
5
760/820
15/20
575/600
60
N.M.
645/715
205/240
35/41
55/60
11
7
1030/1110
20/28
780/815
80
ÉCROU DE BOULON EN U - 7/8 PO
ÉCROU D'AMORTISSEUR - 3/4 PO
BOULON DE SUSPENSION PNEUMATIQUE - 1/2 PO
ÉCROU DE RESSORT PNEUMATIQUE SUPÉRIEUR-3/4 PO
BOUCHON DE SUSPENSION PNEUMATIQUE - 1/4 PO
BOULON DE BIELLE DU CONTRÔLE DE HAUTEUR
ÉCROU DE PIVOT DE REMPLACEMENT pour Huck Bolt
ÉCROU DE SUSP. PNEU. D'ARBRE DE LEVAGE-3/8 PO
BOULON DE BRIDE REY-ALIGN™ - 7/8 PO
BOULON DE RÉGLAGE DE PARALLÉLISME - 3/4 PO
CES AJUSTEMENTS DOIVENT ÊTRE
RESPECTÉS EN TOUT TEMPS
2, 3
7
4
1
16
8, 9
5, 6
17, 18, 19
25 ARUU - 30 ARUU TRAINLER SUSPENSION
10, 11, 12, 13, 14, 15, 20, 21
TOP MOUNT SUSPENSION
PARTS AND MAINTENANCE
ITEM #
1
2
3
4
5, 6
7
8 **
9 **
10
11
12
13
14
15
16
17
18
19
20
21
PART #
See chart next page
24539-01
11010-01
See chart next page
Call Factory
See chart next page
See chart next page
23673-01
23656-01
23948-01
24403-01
23952-01
23674-01
23432-01
23427-01
23939-01
23423-01
20688-02
24358-01
K701163-1
K701163-2
K701311
DESCRIPTION
PER SUSP.
Air Spring
2
Shock Absorber Bolt
4
Shock Absorber Nut
4
Shock Absorber
2
Shock Absorber Replacement Kit
1
Trailing Beam (left and right)
2
Hanger (left and right)
2
REY-ALIGN Yoke Assembly
2
Flange Washer (opposite side of hanger)
2
Pivot Shaft
2
Pivot Shaft Nut
4
Disc Spring Washer for Pivot Shaft
4
Pivot Shaft Sleeve
2
Sleeve Cover
2
Beam Spacers
4
U-Bolt / Axle Spacer
4
U-Bolt
4
U-Bolt nut
8
U-Bolt Washer
8
Re-Bush Kit for ONE Beam
Re-Bush Kit for TWO Beams
Re-Bush Kit for ONE Beam
-
REMARKS
Includes Shocks/Hardware
Includes Bushing #23421-01
Alignment Bolt #24398-01
If REY-ALIGN™
If REY-ALIGN™
If REY-ALIGN™
If REY-ALIGN™
If REY-ALIGN™
If REY-ALIGN™
If REY-ALIGN™
If REY-ALIGN™
If HUCK™ Bolted
25 ARUU - 30 ARUU TRAILING BEAM
25ARUU
RIDE
HEIGHT
6.5"
7.5"
9"
11"
12"
14"
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
BEAM
23764-01
23764-02
23764-01
23764-02
23764-01
23764-02
23764-01
23764-02
23764-01
23764-02
23764-01
23764-02
AIR
SPRING
12882-01
12882-01
23521-01
23521-01
23521-01
23521-01
23521-01
23521-01
23521-01
23521-01
23521-01
23521-01
HUCK BOLT
HANGER
23960-11
23960-11
23960-213
23960-214
23960-315
23960-316
23960-517
23960-528
23960-619
23960-618
23960-717
23960-718
REY-ALIGN UPPER SHOCK SHOCK
HANGER
ASSEMBLY
24001-11
23926-01
23553-01
24001-12
23926-01
23553-01
24001-213
23639-01
23553-01
24001-224
23639-01
23553-01
24001-315
23639-01
23553-01
24001-326
23639-01
23553-01
24001-517
25040-01
23553-01
24001-528
25040-01
23553-01
24001-619
25039-01
23553-01
24001-628
25039-01
23553-01
24001-717
25042-01
23553-01
24001-728
25042-01
23553-01
30ARUU
RIDE
HEIGHT
9"
12"
14"
15"
17"
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
LEFT
RIGHT
BEAM
23782-01
23782-02
23782-01
23782-02
23782-01
23782-02
23782-01
23782-02
23782-01
23782-02
AIR
SPRING
12883-02
12883-02
12883-02
12883-02
12883-02
12883-02
12883-02
12883-02
12883-02
12883-02
HUCK BOLT
HANGER
23960-313
23960-314
23960-613
23960-614
23960-717
23960-718
23960-719
23960-710
23960-917
23960-918
REY-ALIGN
HANGER
24001-313
24001-324
24001-613
24001-624
24001-717
24001-728
24001-719
24001-720
24001-917
24001-928
UPPER SHOCK SHOCK
ASSEMBLY
23926-01
23524-01
23639-01
23524-01
23639-01
23524-01
23639-01
23524-01
25051-01
23553-01
25051-01
23553-01
24749-01
23553-01
24749-01
23553-01
24748-01
23524-01
24748-01
23524-01
MODEL 23AR/25AR/30AR
TORQUE REQUIREMENTS / REQUIS POUR BIELLE DE RÉACTION
U-BOLT NUTS - 7/8"
SHOCK ABSORBER NUT - 3/4"
AIR SPRING BOLT - 1/2"
UPPER AIR SPRING NUT - 3/4"
AIR SPRING PLUG - 1/4"
HEIGHT CONTROL LINK BOLT
REPLACEMENT NUT for Huck Bolt
LIFT AXLE AIR SPRING NUT-3/8"
REY-ALIGN™ CLAMP BOLT-7/8"
ALIGNMENT ADJUSTMENT BOLT
THESE SETTINGS MUST BE
MAINTAINED AT ALL TIMES
FT/LBS
475/525
150/175
25/30
40/45
8
5
760/820
15/20
575/600
60
N.M.
645/715
205/240
35/41
55/60
11
7
1030/1110
20/28
780/815
80
ÉCROU DE BOULON EN U - 7/8 PO
ÉCROU D'AMORTISSEUR - 3/4 PO
BOULON DE SUSPENSION PNEUMATIQUE - 1/2 PO
ÉCROU DE RESSORT PNEUMATIQUE SUPÉRIEUR-3/4 PO
BOUCHON DE SUSPENSION PNEUMATIQUE - 1/4 PO
BOULON DE BIELLE DU CONTRÔLE DE HAUTEUR
ÉCROU DE PIVOT DE REMPLACEMENT pour Huck Bolt
ÉCROU DE SUSP. PNEU. D'ARBRE DE LEVAGE-3/8 PO
BOULON DE BRIDE REY-ALIGN™ - 7/8 PO
BOULON DE RÉGLAGE DE PARALLÉLISME - 3/4 PO
CES AJUSTEMENTS DOIVENT ÊTRE
RESPECTÉS EN TOUT TEMPS
COMMON PARTS 23/25/30 AR SERIES
COMMON PARTS
MODEL BUSHING
PIVOT
REY-ALIGN™
SHAFT NUT
WASHER
PIVOT
SHAFT
SHOCK
BOLT
SHOCK
NUT
U-BOLT
U-BOLT
SPACER
U-BOLT
NUT
23AR
23421-01
14345-01
23952-01
23948-01
23539-01
11010-01
23423-01
23939-01
20688-02
23AR
23421-01
14345-01
23952-01
23948-01
23539-01
11010-01
23423-01
23939-01
20688-02
23AR
23421-01
14345-01
23952-01
23948-01
23539-01
11010-01
23423-01
23939-01
20688-02
HEIGHT CONTROL VALVE
H.C.V.
LINKAGE LENGTH
23756-20
13"
23756-10
6.5"
HOW TO MEASURE LINKAGE LENGTH (A)
TOP LIFT MECHANISM
(1) Lift Weldment Assembly
96" - PART NO. TD24759-X
23751-01
COMMON PARTS TO BOTH
(2) Control Bar
(2) Link Bar
(1) Air Spring Mounting Plate
(10) Clevis Pin
(10) Clevis Pin Washer
(2) 1/2" Chain
(1) Air Spring
(2) Control Bar Bracket
102" - PART NO. TD24759-X
23751-02
23752-01
24754-01
23754-01
700775-01
23148-01
24384-XX (varies by model)
20018-01
23755-01
X = See Price Book
FRONT LIFT (TOP MOUNT)
(1)
(2)
(1)
(1)
(1)
Support Weldment
Upper Mount Weldment
Lift Weldment
Lift Bar Weldment
Air Spring
96" - PART NO. 700673-01
701769-01
701768-01
701771-01
701770-01
19983-01
102" - PART NO. 700673-02
701769-02
70768-01
701771-02
701770-02
19983-01
FRONT LIFT (UNDERSLUNG)
(1)
(2)
(1)
(1)
(1)
Support Weldment
Upper Mount Weldment
Lift Weldment
Lift Bar Weldment
Air Spring
96" - PART NO. 700673-03
701-769-01
701768-01
701771-01
701770-03
19983-01
102" - PART NO. 700673-04
701769-02
70768-01
701771-02
701770-04
19983-01
FRONT HANGER I.D. CHART 23/25/30 AR SERIES
Dim.
REY-ALIGN™
Dim.
6.25"
6.25"
7"
8"
8"
Part No.
24001-11
24001-12
24001-15
24001-21
24001-22
8"
24001-211
8"
8"
9"
24001-213
24001-224
24001-32
9"
24001-311
9"
9"
9"
9"
10"
24001-313
24001-324
24001-315
24001-326
24001-42
10"
24001-411
11"
11"
11"
11"
11"
11"
13"
13"
13"
13"
13"
13"
13"
13"
13"
13"
13"
13"
14.5"
14.5"
14.5"
14.5"
17.5"
17.5"
17.5"
17.5"
24001-52
24001-511
24001-513
24001-524
24001-517
24001-528
24001-62
24001-611
24001-613
24001-624
24001-615
24001-626
24001-628
24001-619
24001-610
24001-622
24001-6101
24001-6222
24001-717
24001-728
24001-719
24001-720
24001-913
24001-924
24001-917
24001-928
Suspension No.
25ARTU-12A(LH), 25ARUU-6.5A(LH)
25ARTU-12A(RH), 25AARUU-6.5A(RH)
25ARTUL-13A(LH), 25ARTUL-13A(RH)
25ARTU-13A(LH)
23ARTU-14A(RH), 23ARTUL-15A(RH),
25ARTU-13A(RH), 25ARTU-14A(RH), 25ARTUL-14A(RH),
25ARTUL-15A(RH), 30ARTU-14A(RH), 30ARTUL-15A(RH)
23ARTU-14A(LH), 23ARTUL-15A(LH), 25ARTU-14A(LH),
25ARTUL-14A(LH), 25ARTUL-15A(LH), 30ARTU-14A(LH),
30ARTUL-15A(LH)
25ARUU-7.5A(LH), 25ARUUL-9A(LH), 30ARUUL-9A(LH)
25ARUU-7.5A(RH), 25ARUUL-9A(RH), 30ARUUL-9A(RH)
23ARTU-15A(RH), 25ARTU-15A(RH),
30ARTU-15A(RH), 30ARTUL-16A(RH)
23ARTU-15A9(LH), 25ARTU-15A(LH),
30ARTU-15A(LH), 30ARTUL-16A(LH)
30ARUU-9A(LH)
30ARUU-9A(RH)
25ARUU-9A(LH)
25ARUU-9A(RH)
23ARTU-16A(RH), 23ARTU-17A(RH), 23ARTUL-17A(RH),
25ARTU-16A(RH), 25ARTUL-16A(RH), 25ARTUL-17A(RH),
30ARTU-16A(RH), 30ARTUL-17A(RH)
23ARTU-16A(LH), 23ARTU-17A(LH), 23ARTUL-17A(LH),
25ARTU-16A(LH), 25ARTUL-16A(LH), 25ARTUL-17A(LH),
30ARTU-16A(LH), 30ARTUL-17A(LH)
25ARTU-17A(RH), 30ARTU-17A(RH)
25ARTU-17A9LH), 30ARTU-17A(LH)
30ARUUL-12A(LH)
30ARUUL-12A(RH)
25ARUU-11A(LH), 25ARUUL-12A(LH)
25ARUU-11A(RH), 25ARUUL-12A(RH)
30ARTU-19A(RH)
30ARTU-19A(LH)
30ARUU-12A(LH)
30ARUU-12A(RH)
25ARUUL-14A(LH)
25ARUUL-14A(RH)
25ARUU-12A(RH)
25ARUU-12A(LH)
30ARUUL-14A(LH)
30ARUUL-14A(LH)
30ARUUL-15A(LH)
30ARUUL-15A9RH)
25ARUU-14A(LH), 30ARUU-14A(LH), 25ARUUL-15A(LH),
25ARUU-14A(RH), 30ARUU-14A(RH), 25ARUUL-15A(RH)
30ARUU-15A(LH)
30ARUU-15A(RH)
30ARUUL-17A(LH)
30ARUUL-17A(RH)
30ARUU-17A(LH)
30ARUU-17A(RH)
HUCK™ BOLTED
Dim.
8"
8"
8"
9"
9"
9"
9"
9"
9"
10"
10"
11"
11"
11"
11"
11"
11"
13"
13"
13"
13"
13"
13"
13"
13"
13"
13"
13"
13"
13"
14.5"
14.5"
14.5"
14.5"
17.5"
17.5"
17.5"
17.5"
Part No.
23960-211
Suspension No.
23ARTU-14S(LH), 23ARTUL-15S(LH),
25ARTU-14S(LH), 25ARTUL-14S(LH),
25ARTUL-15S(LH), 30ARTU-14S(LH), 30ARTUL-15S(LH)
23960-213 25ARUU-7.5S(LH), 25ARUUL-9S(LH), 30ARUUL-9S(LH)
23960-214 25ARUU-7.5S(RH), 25ARUUL-9S(RH), 30ARUUL-9S(RH)
23960-31
23ARTU-15S(RH), 25ARTU-15S(RH),
30ARTU-15S(RH), 30ARTUL-16S(RH),
23960-311 23ARTU-15S(LH), 25ARTU-15S(LH),
30ARTU-15S(LH), 30ARTUL-16S(LH),
23960-313 30ARUU-9S(LH)
23960-314 30ARUU-9S(RH)
23960-315 25ARUU-9S(LH)
23960-316 25ARUU-9S(RH)
23960-41
23ARTU-16S(RH), 23ARTU-17S(RH), 23ARTUL-17S(RH),
25ARTU-16S(RH), 25ARTUL-16S(RH), 25ARTUL-17S(RH),
30ARTU-16S(RH), 30ARTUL-17S(RH),
23960-411 23ARTU-16S(LH), 23ARTU-17S(LH), 23ARTUL-17S(LH),
25ARTU-16S(LH), 25ARTUL-16S(LH), 25ARTUL-17S(LH),
30ARTU-16S(LH), 30ARTUL-17S(LH)
23960-51
25ARTU-17S(RH), 30ARTU-17S(RH)
23960-511 24ARTU-17S(LH, 30ARTU-17S(LH)
23960-513 30ARUUL-12S(LH)
23960-514 30ARUUL-12S(RH)
23960-517 25ARUU-11S(LH), 25ARUUL-12S(LH)
23960-518 25ARUU-11S(RH), 25ARUUL-12S(RH)
23960-61
30ARTU-19S(RH)
23960-611 30ARTU-19S(LH)
23960-613 30ARUU-12S(LH)
23960-614 30ARUU-12S(RH)
23960-615 25ARUUL-14S(LH)
23960-616 25ARUUL-14S(RH)
23960-617 (NO LONGER USED - WAS 30ARUUL-14S)
23960-618 25ARUU-12S(RH)
23960-619 25ARUU-12S(LH)
23960-610 30ARUUL-14S(LH)
23960-612 30ARUUL-14S(RH)
23960-6101 30ARUUL-15S(LH)
23960-6122 30ARUUL-15S(RH)
23960-717 25ARUU-14S(LH), 30ARUU-14S(LH), 25ARUUL-15S(LH)
23960-718 25ARUU-14S(RH), 30ARUU-14S(RH), 25ARUUL-15S(RH)
23960-719 30ARUU-15S(LH)
23960-710 30ARUU-15S(RH)
23960-913 30ARUUL-17S(LH)
23960-914 30ARUUL-17S(RH)
23960-917 30ARUU-17S(LH)
23960-918 30ARUU-17S(RH)
MODEL 86AR/RS1035, 86AR/RS1015
SIDE VIEW
REAR VIEW
86AR SLIDER TABLE - 1244.6 MM (49”) AXLE SPACING
FW
(1) Slider
(16) LASSA-fr.
(17) LASSA-rr.
(18) Track Rod - rigid
1066.8 mm (42”)
1219.2 mm (48”)
21580-42
21580-48
19788-02
19789-02
19788-02
19789-02
20012-01
10910-01
86AR AXLE SEAT TABLE - 127 MM (5”) ROUND AXLE
Mounting Height
(6) Axle Seat (8) Bottom Plate (9) 19.1 mm (3/4”)
U Bolt
355.6
368.3
381.0
393.7
406.4
419.1
431.8
0836-01
0836-015
0836-02
0836-025
0836-03
0836-035
0836-04
mm
mm
mm
mm
mm
mm
mm
(14”)
(14 1/2”)
(15”)
(15 1/2”)
(16”)
(16 1/2”)
(17”)
0538-00
0538-00
0538-00
0538-00
0538-00
0538-00
0538-00
19780-110
19780-115
19780-120
19780-125
19780-130
19780-135
19780-140
(9) 22.4 mm (7/8”)
U Bolt (optional)
U Bolt Length
08492-01
08493-01
08494-01
18885-01
08495-01
09009-01
08496-01
279.4 mm (11”)
292.1 mm (11 1/2”)
304.8 mm (12”)
317.5 mm (12 1/2”)
330.2 mm (13”)
342.9 mm (13 1/2”)
355.6 mm (14”)
MODEL 86AR
SUSPENSION ASSEMBLY
ITEM PART NUMBER
1
1605-00
2
19913-01
3
19914-01
4
0075-20
5
1035-20
6
See Tables
7
1098-00
8 See Tables (pg.22)
9 See Tables (pg.22)
10
14344-01
11
T5496
12
18879-01
13
18880-01
14
20018-01
15
21491-01
16
See Tables
18
See Tables
19
17353-01
20
17357-01
21
0003-07
22
18165-01
23
21496-01
24
14344-01
26
20029-01
27
12920-01
28
T1705
29
08211-01
30
T3164
31
T1859
33
18842-01
34
14345-01
35
T7292
36
23329-01
20108-02
41
20161-01
21902-01
42
19772-01
43
17856-01
44
19769-01
19769-02
DRAWING NO.
1605-00
92129
92130
0075-XX
1035-XX
TANDEM
4
2
2
2
2
1098-00
4
4
8
16
16
12
12
4
4
2
2
12
12
12
4
8
8
8
4
4
4
4
8
4
4
8
1
1
2
1
2
4
8
8
92047
93281
63155
0001-XX
0002-XX
79167
94230
92052
57179
62158
93281
0003-XX
79168
62158
93281
93280
93280
62159
93280
62159
62159
62158
93281
93403
97142
92285
92289
79189#2
92043
89293
92039
92039
DESCRIPTION
front hanger/straddlemount
left spring beam
right spring beam
rigid torque arm
adjustable torque arm
top plate
bottom plate 127 mm (5”)
u bolt
locknut 19 mm (3/4”)
washer 19 mm (3/4”)
torque arm bolt 22 mm (7/8”)
flange locknut 22 mm (7/8”)
air spring
track rod bracket
lower air spring support
track rod
cap screw 13 mm (1/2”)
locknut 13 mm (1/2”)
flat washer 13 mm (1/2”)
shock absorbers assembly
shock absorber bolt 19 mm (3/4”)
shock absorber nut 19 mm (3/4”)
nut 9 mm (3/8”)
hex nut 13 mm (1/2”)
lockwasher 13 mm (1/2”)
nut 19 mm (3/4”)
lockwasher 19 mm (3/4”)
lockwasher 9 mm (3/8”)
hex bolt 22 mm x 76 mm (7/8” x 3”)
locknut 22 mm (7/8”)
u bolt washer 22 mm (7/8”)
height control valve 6 mm (1/4”)
height control valve 9 mm (3/8”)
self-tapping screw 6 mm x 63.5 mm (1/4” x 2 1/2”)
pressure protection valve/filter
track rod hanger
upper air spring plate
upper shock absorber mount left
upper shock absorber mount right
1. Mounting height can be varied from 14" to 17" by changing Axle Seat (Item 6)
2. Axle travel 3.00" up, 3.05" down
3. Tighten torque arm bolt nuts to 400 - 450 ft. lbs.
4. Tighten 3/4" u-bolt nuts to 300 - 325 ft. lbs.
Tighten 7/8" u-bolt nuts to 400 - 450 ft. lbs.
5. Tighten torque arm clamp nuts to 125 - 150 ft. lbs.
MODEL 86AR SLIDER ASSEMBLY
TOP VIEW
MODEL 86AR
SLIDER PARTS ASSEMBLY
ITEM
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PART NUMBER
22662-01
19772-01
*Variable
17854-01
Call Factory
19620-01
19619-01
19766-01
16418-01
21225-48
Call Factory
Call Factory
19720-02
19638-01
18734-01
19753-01
19630-01
TANDEM
4
2
1
2
2
2
16
4
8
1
9
1
4
4
4
4
DESCRIPTION
Hanger
Track Rod Hanger
Slider Assembly - 1219.2 mm (48")
Small Track Rod Hanger Gusset
Large Track Rod Hanger Gusset
Bearing Strip
Screw Bearing Strip
Body Rail Guide
Locknut 12.7 mm (1/2")
Pull Handle - 1219.2 mm (48")
Flat Washer 16 mm (5/8")
Cotter Pin
Hanger Gusset
Compression Spring
Puller Link - 1219.2 mm (48")
Lock Pin (Binkley®) 35 mm (1 3/8")
Lock Pin (Hutch®) 41 mm (1 5/8")
MODEL 86AR
TORQUE REQUIREMENTS / REQUIS POUR BIELLE DE RÉACTION
U-BOLT NUTS
TORQUE ARM BOLT NUTS 7/8"
TORQUE ARM CLAMP NUTS 5/8"
TORQUE ARM CLAMP NUTS 3/4"
TRACK ROD BOLT NUT - 7/8"
TRACK ROD BRACKET BOLT-1/2"
AIR SPRING SUPPORT BOLT-7/8"
SHOCK ABSORBER NUT - 3/4"
LOWER AIR SPRING NUT - 3/8"
UPPER AIR SPRING NUT - 3/4"
THESE SETTINGS MUST BE
MAINTAINED AT ALL TIMES
FT/LBS
300/325
325/350
125/150
175/200
325/350
100/120
300/325
150/175
30
50
N.M.
410/440
400-475
170/200
240/270
440/475
135/165
410/440
205-240
4
70
ÉCROU DE BOULON EN U
ÉCROU DE JAMBE DE FORCE DE 7/8 PO
ÉCROU DE BRIDE DE JAMBE DE FORCE DE 5/8 PO
ÉCROU DE BRIDE DE JAMBE DE FORCE DE 3/4 PO
ÉCROU DE BOULON DE GLISSIÈRE - 7/8 PO
BOULON DE PATTE DE GLISSIÈRE - 1/2 PO
BOULON DE SUPPORT-RESSORT PNEUMATIQUE - 7/8 PO
ÉCROU D'AMORTISSEUR - 3/4 PO
ÉCROU DE RESSORT PNEUMATIQUE INFÉRIEUR-3/8 PO
ÉCROU DE RESSORT PNEUMATIQUE SUPÉRIEUR-3/4 PO
CES AJUSTEMENTS DOIVENT ÊTRE
RESPECTÉS EN TOUT TEMPS
MODEL 21AR TRAILER SUSPENSION
(6) Axle Seat
20051-01
24292-01
20051-03
(16) LASSA
25017-38
25017-40
25017-42
25017-44
U-BOLT NUTS
TORQUE ARM BOLT NUTS 1"
TORQUE ARM CLAMP NUTS 5/8"
TORQUE ARM CLAMP NUTS 3/4"
TRACK ROD BOLT NUT - 7/8"
TRACK ROD BRACKET BOLT-1/2"
AIR SPRING SUPPORT BOLT-7/8"
SHOCK ABSORBER NUT - 3/4"
LOWER AIR SPRING NUT - 3/8"
UPPER AIR SPRING NUT - 3/4"
THESE SETTINGS MUST BE
MAINTAINED AT ALL TIMES
FT/LBS
300/325
140/160
125/150
165/200
325/350
100/120
325/350
175/200
30
50
N.M.
410/440
220/275
170/200
225/270
440/475
135/165
440/475
240/275
41
70
26
CES AJUSTEMENTS DOIVENT ÊTRE
RESPECTÉS EN TOUT TEMPS
ÉCROU DE BOULON EN U
ÉCROU DE JAMBE DE FORCE DE 1 PO
ÉCROU DE BRIDE DE JAMBE DE FORCE DE 5/8 PO
ÉCROU DE BRIDE DE JAMBE DE FORCE DE 3/4 PO
ÉCROU DE BOULON DE GLISSIÈRE - 7/8 PO
BOULON DE PATTE DE GLISSIÈRE - 1/2 PO
BOULON DE SUPPORT-RESSORT PNEUMATIQUE - 7/8 PO
ÉCROU D'AMORTISSEUR - 3/4 PO
ÉCROU DE RESSORT PNEUMATIQUE INFÉRIEUR-3/8 PO
ÉCROU DE RESSORT PNEUMATIQUE SUPÉRIEUR-3/4 PO
U Bolt Length
292.1 mm (11 1/2”)
317.5 mm (12 1/2”)
355.6 mm (14”)
(18) Track Rod - rigid
20012-01
20969-01
20314-01
10910-01
(8) Bottom Plate (9) U Bolt
053800
08493-01
053800
18885-01
053800
08496-01
21AR AXLE SEAT TABLE - 5” ROUND AXLE
LENGTH
965.2 mm (38”)
1016.0 mm (40”)
1066.8 mm (42”)
1117.6 mm (44”)
21AR LOWER AIR SPRING SUPPORT AND TRACK ROD TABLE
REAR VIEW
TORQUE REQUIREMENTS / REQUIS POUR BIELLE DE RÉACTION
MODEL 21AR
Mounting Height
355.6 mm (14”)
387.4 mm (15 1/4”)
419.1 mm (16 1/2”)
SIDE VIEW
REAR VIEW
SIDE VIEW
MODEL 21AR TRAILER SUSPENSION
21AR LOWER AIR SPRING SUPPORT AND TRACK ROD TABLE
LENGTH
965.2 mm (38”)
1016.0 mm (40”)
1066.8 mm (42”)
1117.6 mm (44”)
(16) LASSA
25017-38
25017-40
25017-42
25017-44
(18) Track Rod - rigid
20012-01
20969-01
20314-01
10910-01
21AR AXLE SEAT TABLE - 5” ROUND AXLE
Mounting Height
355.6 mm (14”)
387.4 mm (15 1/4”)
419.1 mm (16 1/2”)
(6) Axle Seat
20051-01
24292-01
20051-03
(8) Bottom Plate (9) U Bolt
053800
08493-01
053800
18885-01
053800
08496-01
U Bolt Length
292.1 mm (11 1/2”)
317.5 mm (12 1/2”)
355.6 mm (14”)
MODEL 21AR
TORQUE REQUIREMENTS / REQUIS POUR BIELLE DE RÉACTION
U-BOLT NUTS
TORQUE ARM BOLT NUTS 1"
TORQUE ARM CLAMP NUTS 5/8"
TORQUE ARM CLAMP NUTS 3/4"
TRACK ROD BOLT NUT - 7/8"
TRACK ROD BRACKET BOLT-1/2"
AIR SPRING SUPPORT BOLT-7/8"
SHOCK ABSORBER NUT - 3/4"
LOWER AIR SPRING NUT - 3/8"
UPPER AIR SPRING NUT - 3/4"
THESE SETTINGS MUST BE
MAINTAINED AT ALL TIMES
FT/LBS
300/325
140/160
125/150
165/200
325/350
100/120
325/350
175/200
30
50
N.M.
410/440
220/275
170/200
225/270
440/475
135/165
440/475
240/275
41
70
ÉCROU DE BOULON EN U
ÉCROU DE JAMBE DE FORCE DE 1 PO
ÉCROU DE BRIDE DE JAMBE DE FORCE DE 5/8 PO
ÉCROU DE BRIDE DE JAMBE DE FORCE DE 3/4 PO
ÉCROU DE BOULON DE GLISSIÈRE - 7/8 PO
BOULON DE PATTE DE GLISSIÈRE - 1/2 PO
BOULON DE SUPPORT-RESSORT PNEUMATIQUE - 7/8 PO
ÉCROU D'AMORTISSEUR - 3/4 PO
ÉCROU DE RESSORT PNEUMATIQUE INFÉRIEUR-3/8 PO
ÉCROU DE RESSORT PNEUMATIQUE SUPÉRIEUR-3/4 PO
CES AJUSTEMENTS DOIVENT ÊTRE
RESPECTÉS EN TOUT TEMPS
MODEL 21AR SPRING BEAM
ITEM PART NUMBER
1
21949-01
2
19879-01
3
19880-01
4
15178-01
5
15172-01
6
See Tables
7
20050-01
8
See Tables
9
See Tables
10
14345-01
11
T7292
12
10033-01
13
10092-01
14
19983-01
15
21491-01
16
See Tables
18
See Tables
19
17353-01
20
17357-01
21
10016-01
22
12887-01
23
08210-01
24
14344-01
25
T1859
26
20029-01
27
12920-01
28
T1705
29
08211-01
30
T3164
31
18842-01
32
21778-01
33
14345-01
35
T7292
37
17854-01
38
T5492
39
T5495
40
T2224
41
T5493
42
18919-01
43
24067-01
45
16144-01
DRAWING NO.
95159
92098
92099
83174
84108
92216
93281
93403#2
62158#1
93281
79167#2
94230
62158#3
93281
93403#2
79168#1
62158#1
93281
62159
93280
93280
62159
93280
62159
62158#3
95059
93281
93403#2
89291
62158#1
93281
93403#3
63151
90198
98230
94077
SINGLE
2
1
1
1
1
2
2
2
4
8
8
1
1
2
2
0
1
4
4
6
2
4
4
4
4
4
2
2
2
4
2
4
2
2
4
4
8
8
1
2
8
TANDEM
4
2
2
2
2
4
4
4
8
16
16
2
2
4
4
1
2
8
8
12
4
8
8
8
8
8
4
4
4
8
4
8
4
4
8
8
16
16
2
4
16
DESCRIPTION
front hanger
left spring beam
right spring beam
rigid torque arm
adjustable torque arm assembly
axle seat
top plate
bottom plate
u bolt
locknut 22 mm (7/8”)
u bolt washer 22 mm (7/8”)
track rod bolt 22 mm (7/8”)
locknut 22 mm (7/8”)
air spring
track rod bracket
lower air spring support
track rod
cap screw 13 mm (1/2”)
locknut 13 mm (1/2”)
washer 13 mm (1/2”)
shock absorber
shock absorber bolt 19 mm (3/4”)
shock absorber nut 19 mm (3/4”)
lockwasher 9 mm (3/8”)
16 UNC nut 9 mm (3/8”)
hex nut 13 mm (1/2”)
lockwasher 13 mm (1/2”)
nut 19 mm (3/4”)
lockwasher 19 mm (3/4”)
hex bolt 22 mm x 76 mm (7/8” x 3”)
upper shock mounting assembly
locknut 22 mm (7/8”)
washer 22 mm (7/8”)
gusset for track rod hanger
torque arm bolt 25 mm (1”)
locknut 25 mm (1”)
torque arm compression washer
torque arm bushing
track rod hanger
upper air spring plate
gusset for upper air spring
MODEL 74AR TRAILER SUSPENSION
(16) LASSA
25017-38
25017-40
25017-42
25017-44
U-BOLT NUTS
TORQUE ARM BOLT NUTS
TORQUE ARM CLAMP NUTS
TRACK ROD BOLT NUT - 7/8"
TRACK ROD BRACKET BOLT-1/2"
AIR SPRING SUPPORT BOLT-7/8"
SHOCK ABSORBER NUT - 3/4"
LOWER AIR SPRING NUT - 3/8"
UPPER AIR SPRING NUT - 3/4"
THESE SETTINGS MUST BE
MAINTAINED AT ALL TIMES
FT/LBS
300/325
600/625
175/200
325/350
100/120
325/350
175/200
30
50
28
N.M.
410/440
800-850
240-275
440/475
135/165
440/475
240/275
41
70
CES AJUSTEMENTS DOIVENT ÊTRE
RESPECTÉS EN TOUT TEMPS
ÉCROU DE BOULON EN U
ÉCROU DE JAMBE DE FORCE
ÉCROU DE BRIDE DE JAMBE DE FORCE
ÉCROU DE BOULON DE GLISSIÈRE - 7/8 PO
BOULON DE PATTE DE GLISSIÈRE - 1/2 PO
BOULON DE SUPPORT-RESSORT PNEUMATIQUE - 7/8 PO
ÉCROU D'AMORTISSEUR - 3/4 PO
ÉCROU DE RESSORT PNEUMATIQUE INFÉRIEUR-3/8 PO
ÉCROU DE RESSORT PNEUMATIQUE SUPÉRIEUR-3/4 PO
U Bolt Length
292.1 mm (11 1/2”)
317.5 mm (12 1/2”)
355.6 mm (14”)
(18) Track Rod - rigid
20012-01
20969-01
20314-01
10910-01
74AR AXLE SEAT TABLE - 5” ROUND AXLE
(6) Axle Seat (8) Bottom Plate (9) U Bolt
15751-01
19989-01
20995-08
19996-01
19989-01
20996-08
19996-01*
19989-01
20997-08
LENGTH
965.2 mm (38”)
1016.0 mm (40”)
1066.8 mm (42”)
1117.6 mm (44”)
74AR LOWER AIR SPRING SUPPORT AND TRACK ROD TABLE
REAR VIEW
TORQUE REQUIREMENTS / REQUIS POUR BIELLE DE RÉACTION
MODEL 74AR
* Includes 20228-01 25 mm (1”) Spacer Block
Mounting Height
362.0 mm (14 1/4”)
387.4 mm (15 1/4”)
412.8 mm (16 1/4”)
SIDE VIEW
REAR VIEW
SIDE VIEW
74AR LOWER AIR SPRING SUPPORT AND TRACK ROD TABLE
MODEL 74AR TRAILER SUSPENSION
LENGTH
965.2 mm (38”)
1016.0 mm (40”)
1066.8 mm (42”)
1117.6 mm (44”)
Mounting Height
362.0 mm (14 1/4”)
387.4 mm (15 1/4”)
412.8 mm (16 1/4”)
(16) LASSA
25017-38
25017-40
25017-42
25017-44
(18) Track Rod - rigid
20012-01
20969-01
20314-01
10910-01
74AR AXLE SEAT TABLE - 5” ROUND AXLE
(6) Axle Seat (8) Bottom Plate (9) U Bolt
15751-01
19989-01
20995-08
19996-01
19989-01
20996-08
19996-01*
19989-01
20997-08
U Bolt Length
292.1 mm (11 1/2”)
317.5 mm (12 1/2”)
355.6 mm (14”)
* Includes 20228-01 25 mm (1”) Spacer Block
MODEL 74AR
TORQUE REQUIREMENTS / REQUIS POUR BIELLE DE RÉACTION
U-BOLT NUTS
TORQUE ARM BOLT NUTS
TORQUE ARM CLAMP NUTS
TRACK ROD BOLT NUT - 7/8"
TRACK ROD BRACKET BOLT-1/2"
AIR SPRING SUPPORT BOLT-7/8"
SHOCK ABSORBER NUT - 3/4"
LOWER AIR SPRING NUT - 3/8"
UPPER AIR SPRING NUT - 3/4"
THESE SETTINGS MUST BE
MAINTAINED AT ALL TIMES
FT/LBS
300/325
600/625
175/200
325/350
100/120
325/350
175/200
30
50
N.M.
410/440
800-850
240-275
440/475
135/165
440/475
240/275
41
70
ÉCROU DE BOULON EN U
ÉCROU DE JAMBE DE FORCE
ÉCROU DE BRIDE DE JAMBE DE FORCE
ÉCROU DE BOULON DE GLISSIÈRE - 7/8 PO
BOULON DE PATTE DE GLISSIÈRE - 1/2 PO
BOULON DE SUPPORT-RESSORT PNEUMATIQUE - 7/8 PO
ÉCROU D'AMORTISSEUR - 3/4 PO
ÉCROU DE RESSORT PNEUMATIQUE INFÉRIEUR-3/8 PO
ÉCROU DE RESSORT PNEUMATIQUE SUPÉRIEUR-3/4 PO
CES AJUSTEMENTS DOIVENT ÊTRE
RESPECTÉS EN TOUT TEMPS
MODEL 74AR SPRING BEAM
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
19
20
21
22
23
24
25
26
27
28
29
30
32
33
34
35
36
38
39
42
43
44
45
46
47
48
49
PART NUMBER
16671-01
19897-01
19898-01
16585-01
16595-01
See Tables
20157-01
See Tables
See Tables
14345-01
T7292
10033-01
10092-01
19983-01
21491-01
See Tables
10910-01
17353-01
17357-01
10016-01
12887-01
08210-01
14344-01
T1859
20029-01
12920-01
T1705
08211-01
T3164
19790-01
18842-01
14345-01
T7292
23329-01
T5492
T5495
18919-01
24067-01
21778-01
17854-01
16144-01
T5770
11010-01
12916-01
DRAWING NO.
88006
92114
92115
87267
87269
92283
93281
93403#2
62158#1
93281
79167#2
94230
57179
62158#3
93281
93403#2
79168#1
62158#1
93281
62159
93280
93280
62159
93280
62159
92053
62153#3
93281
93403#2
97142
62158#1
93281
90198
98230
95059
89291
94077
93403#2
93281
62158#2
SINGLE
2
1
1
1
1
2
2
2
4
8
8
2
2
2
2
0
1
4
4
4
2
4
4
4
4
2
2
2
2
2
4
4
4
1
4
4
1
2
2
2
8
4
4
4
TANDEM
4
2
2
2
2
4
4
4
8
16
16
4
4
4
4
1
2
8
8
8
4
8
8
8
8
4
4
4
4
4
8
8
8
1
8
8
2
4
4
4
16
8
8
8
DESCRIPTION
front hanger
left spring beam
right spring beam
rigid torque arm
adjustable torque arm assembly
axle seat
top plate
bottom plate
u bolt
locknut 22 mm (7/8”)
u bolt washer 22 mm (7/8”)
track rod bolt 22 mm (7/8”)
track rod locknut 22 mm (7/8”)
air spring
track rod bracket
lower air spring support
track rod
cap screw 13 mm (1/2”)
locknut 13 mm (1/2”)
washer 13 mm (1/2”)
shock absorber
shock absorber bolt 19 mm (3/4”)
shock absorber nut 19 mm (3/4”)
lockwasher 9 mm (3/8”)
16 UNC nut 9 mm (3/8”)
nut 13 mm (1/2”)
lockwasher 13 mm (1/2”)
nut 19 mm (3/4”)
lockwasher 19 mm (3/4”)
lower air spring plate
hex bolt 22 mm x 76 mm (7/8” x 3”)
locknut 22 mm (7/8”)
u bolt washer 22 mm (7/8”)
height control valve
torque arm bolt 25 mm (1”)
locknut 25 mm (1”)
track rod hanger
upper air spring plate
upper shock mount assembly
gusset - track rod hanger
gusset - upper air spring
structural washer 25 mm (1”)
self-locking nut
hex head cap screw
CHART A - COMMON U-BOLT TYPES AND LENGTHS
ADD DIMENSIONS A + B + C + D + F AS IN DRAWING AT RIGHT.
EXAMPLE
DIM. A
NUT AND WASHER
1.375"
DIM. B
TOP PLATE (T-5488)
.875"
DIM. C
SPRING (T-3086)
3.499"
DIM. D
AXLE SEAT (09730-01)
.750"
DIM. E
5" ROUND AXLE
5.000"
DIM. F
1/4" EXPOSED THREAD
.250"
ALLOWANCE
____________
11.743" OR 12" U-BOLT
LENGTH
INVERTED “I”
76.2 MM (3") DIA. BEND
19.1 mm (3/4”) 22.4 mm (7/8”)
ROCKWELL “C”
101.8 MM X 152.4 MM (4" X 6")
“C”
127.0 MM X 127.O MM (5" X 5")
”C”
127.0 MM (5") ROUND
“C”
146.1 MM (5 3/4") ROUND
19.1 mm (3/4”)
22.4 mm (7/8”)
19.1 mm (3/4”)
22.4 mm (7/8”)
19.1 mm (3/4”)
22.4 mm (7/8”)
19.1 mm (3/4”)”
“22.4 mm (7/8”)”
“254.0 mm (10”)
—
08491-01
—
—
—
—
19780-180
08507-01
—
—
266.7 mm (10 1/2”)
—
—
—
—
—
—
12618-01
08508-01
—
—
279.4 mm (11”)
15780-01
08492-01
—
—
09881-01
08981-01
09754-01
08509-01
—
—
292.1 mm (11 1/2”)
09738-01
08493-01
—
08970-01
—
—
10585-01
08510-01
—
—
304.8 mm (12”)
10583-01
08494-01
—
08971-01
09513-01
08983-01
09755-01
08511-01
—
—
317.5 mm (12 1/2”)
10565-01
—
—
08972-01
09514-01
08984-01
09756-01
08512-01
—
08948-01
330.2 mm (13”)
09739-01
08495-01
09555-01
08973-01
09515-01
08985-01
09757-01
08513-01
—
—
342.9 mm (13 1/2”)
09740-01
09009-01
09512-01
08974-01
09516-01
08986-01
09760-01
08514-01
—
08950-01
355.6 mm (14”)
09741-01
08496-01
09556-01
08975-01
—
08987-01
09761-01
08515-01
—
08951-01
368.3 mm (14 1/2”)
09742-01
08497-01
09557-01
—
—
08988-01
09762-01
08516-01
—
08952-01
381.0 mm (15”)
09743-01
08498-01
09558-01
—
09518-01
08989-01
09763-01
08517-01
—
08953-01
393.7 mm (15 1/2”)
09744-01
08499-01
—
08978-01
—
08990-01
09764-01
08518-01
—
—
406.4 mm (16”)
09745-01
08500-01
09560-01
—
—
—
09765-01
08520-01
12126-01
—
419.1 mm (16 1/2”)
09746-01
08501-01
—
—
—
—
08564-01
24213-165
—
08956-01
431.8 mm (17”)”
09747-01
08502-01
—
—
—
—
08565-01
08522-01
—
—
444.5 mm (17 1/2”)
09749-01
08503-01
—
—
—
—
—
24213-175
—
—
457.2 mm (18”)
19780-172
16179-01
—
—
—
—
—
24213-180
—
—
469.9 mm (18 1/2”)
19780-185
14923-01
—
—
—
—
—
—
—
—
495.3 mm (19 1/2”)
—
08505-01
—
—
—
—
—
—
—
—
CHART B - TOP PLATES
Top Plates “Conventional” U Bolts (Nuts up)
AXLE TYPE
127 mm (5”) Round
146 mm (5 3/4”) Round
127 mm x 127 mm (5” x 5”) Square
101.6 mm x 152.4 mm (4” x 6”) Rect.
U BOLT DIA.
MODEL
21B
MODELS
83 - 91
MODELS
74B
9 mm (3/4”) & 22 mm (7/8”)
19 mm (3/4”) & 22 mm (7/8”)
19 mm (3/4”) & 22 mm (7/8”)
19 mm (3/4”)
22 mm (7/8”)
T5488
T1948
T1734*
09987-01*
T4069*
T5488
-T1734*
09987-01*
--
13798-01
14527-01
----
*Requires U Bolt Bottom Clips - see below
Top Plates “Inverted” U Bolts (Nuts down)
AXLE TYPE
127 mm (5”) Round
127 mm x 127 mm (5” x 5”) Square
101.6 mm x 152.4 mm (4” x 6”) Rect.
U BOLT DIA.
MODEL
21B
MODELS
83 - 91
MODELS
74B
All
All
All
0077-00
0077-00
0077-00
0077-00
0077-00
0077-00
----
Bottom Plates “Inverted” U Bolts (Nuts down)
AXLE TYPE
127 mm (5”) Round
127 mm x 127 mm (5” x 5”) Square
101.6 mm x 152.4 mm (4” x 6”) Rect.
U BOLT DIA.
MODEL
21B
MODELS
83 - 91
MODELS
74 - 74A
19 mm (3/4”)
22 mm (7/8”)
19 mm (3/4”) & 22 mm (7/8”)
19 mm (3/4”) & 22 mm (7/8”)
0538-00
-09229-01
09230-01
0538-00
-09229-01
09230-01
-----
Bottom Plates - Underslung (Nuts down)
AXLE TYPE
127 mm (5” Round
127 mm x 127 mm (5” x 5”) Square
U BOLT DIA.
MODEL
21B
MODELS
83 - 91
MODELS
74 - 74A
19 mm (3/4”) & 22 mm (7/8”)
19 mm (3/4”) & 22 mm (7/8”)
T5727
T5727
0858-00
0858-00
---
Bottom Clips - Between U Bolts and Axle “Conventional”
AXLE TYPE
127 mm x 127 mm (5” x 5”) Square
101.6 mm x 152.4 mm (4” x 6”) Rect.
U BOLT DIA.
MODEL
21B
MODELS
83 - 91
MODELS
74 - 74A
19 mm (3/4”) & 22 mm (7/8”)
19 mm (3/4”) & 22 mm (7/8”)
T5587
T7560
T5587
T7560
---
CHART C - TORQUE ARM IDENTIFICATION CHART
TORQUE ARM IDENTIFICATION CHART
MODELS 21B - 21-1/2B FAB - 21AR
2 PIECE BUSHINGS
1 PIECE
BUSHINGS
TUBE
PART NUMBER
MEASURE
TUBE LENGTH
RIGID
PART NUMBER
MEASURE
CENTRELINE OF BUSHING
EYES
692.2 mm (27 1/4”)
622.3 mm (24 1/2”)
635 mm (25”)
547.6 mm (21 9/16”)
666.8 mm (26 1/4”)
412.8 mm (16 1/4”)
492.3 mm (19 3/8”)
660.4 mm (26”)
479.6 mm (18 7/8”)
539.8 mm (21 1/4”)
400.1 mm (15 3/4”)
412.8 mm (16 1/4”)
501.7 mm (19 3/4”)
15171-01
15172-01
15173-01
15174-01
15175-01
15176-01
15177-01
15354-01
15355-01
349.3 mm (13 3/4”)
412.8 mm (16 1/4”)
428.8 mm (18 7/8”)
495.3 mm (19 1/2”)
571.5 mm (22 1/2”)
635 mm (25”)
685.8 mm (27”)
533.4 mm (21”)
547.6 mm (21 9/16”)
15018-01
15017-01
15016-01
15015-01
15019-01
15020-01
15021-01
15015-01
15015-01
222.3 mm (8 3/4”)
279.4 mm (11”)
336.6 mm (13 1/4”)
393.7 mm (15 1/2”)
450.9 mm (17 3/4”)
508.0 mm (20”)
565.2 mm (22 1/4”)
393.7 mm (15 1/2”)
393.7 mm (15 1/2”)
08650-01
09684-01
09686-01
10183-01
10973-01
15178-01
15286-01
16431-01
T2293
T5936
T7633
T7635
T7647
16595-01
16596-01
16597-01
17534-01
362 mm (14 1/4”)
533.4 mm (21”)
622.3 mm (24 1/2”)
489 mm (19 1/4”)
22434-09
22434-16
22434-20
22434-14
222.3 mm (8 3/4”)
393.7 mm (15 1/2”)
489.0 mm (19 1/4”)
336.6 mm (13 1/4”)
16585-01
16586-01
16587-01
16588-01
16589-01
17532-01
362.0 mm (14 1/4”)
514.4 mm (20 1/4”)
533.4 mm (21”)
539.8 mm (21 1/4”)
622.3 mm (24 1/2”)
489.0 mm (19 1/4”)
222.3 mm (8 3/4”)
393.7 mm (15 1/2”)
450.9 mm (17 3/4”)
508.0 mm (20”)
565.2 mm (22 1/4”)
679.5 mm (26 3/4”)
279.4 mm (11”)
10040-01
10041-01
12014-01
12389-01
12422-01
12465-01
12601-01
15287-01
17003-01
17152-01
17153-01
381.0 mm (15”)
508.0 mm (20”)
520.7 mm (20 1/2”)
679.5 mm (26 3/4”)
641.4 mm (25 1/4”)
565.2 mm (22 1/4”)
701.8 mm (27 5/8”)
387.4 mm (15 1/4”)
787.4 mm (31”)
635.0 mm (25”)
647.7 mm (25 1/2”)
MODELS 83 - 91 - 91 1/2
1 PIECE BUSHINGS
MEASURE
CENTRELINE OF BUSHING
EYES
MODELS 74B - 74AR
MODELS 83 - 91 - 91 1/2
ADJUSTABLE
NUMBER
RIGID TORQUE ARMS
MODELS 21B - 21-1/2B FAB - 21AR
MODELS 74B - 74AR
ADJUSTABLE TORQUE ARMS
16031-01
16032-01
16033-01
16034-01
16035-01
17001-01
701631-01
381 mm (15”)
508 mm (20”)
584.2 mm (23”)
641.4 mm (25 1/4”)
692.2 mm (27 1/4”)
787.4 mm (31”)
387.4 mm (15 1/4”)
15018-01
15015-01
15019-01
15020-01
15021-01
17002-01
15017-01
CHART D - REYCO SPRING REFERENCE CHART
REYCO
SPRING NO.
SPRING
CAPACITY
NO. OF
LEAVES
AXLE
SPACING
LEAF
THICKNESS
WEIGHT
LBS.
HOOK
LOC.
21B
FAB
83 &
91
102
ARCH
STACK
HEIGHT
74B
REAR
OVERALL
LENGTH
21B
FRONT
T3086
9000 lbs.
7
All
0.499
536.7 mm (21 1/8”)
536.7 mm (21 1/8”)
1073.2 mm (42 1/4”)
Med.
3.493
86
2R
†
—
—
—
—
T3564
11000 lbs.
8
All
0.499
536.7 mm (21 1/8”)
536.7 mm (21 1/8”)
1073.2 mm (42 1/4”)
Med.
3.992
105
3R
†
†
†
—
—
T5532
9000 lbs.
7
All
0.499
539.8 mm (21 1/4”)
539.8 mm (21 1/4”)
1079.5 mm (42 1/2”)
Low
3.493
85.8
2R
†
—
†
—
—
T5555
11000 lbs.
1
All
1.375
533.4 mm (21”)
550.9 mm (21 11/16”)
1084.3 mm (42 11/16”)
Med.
1.375
34.4
1R
†
†
†
—
—
T5592
11000 lbs.
8
All
0.499
539.8 mm (21 1/4”)
539.8 mm (21 1/4”)
1079.5 mm (42 1/2”)
Low
3.992
95
2R
†
—
†
—
—
T5597
11000 lbs.
8
All
0.499
533.4 mm (21”)
546.1 mm (21 1/2”)
1079.5 mm (42 1/2”)
Hi
3.992
96
2R
†
—
†
—
—
T7452
13000 lbs.
9
All
0.499
536.7 mm (21 1/8”)
524 mm (20 5/8”)
1060.5 mm (41 3/4”)
Med.
4.491
114.6
3R
†
—
—
—
—
08376-01 11000 lbs.
LENGTH
3
All
0.788
533.4 mm (21”)
533.4 mm (21”)
1066.8 mm (42”)
Med.
2.484
59
1R
†
†
†
—
—
14
1320.8 mm (52”)
0.401
568.5 mm (22 3/8”)
568.5 mm (22 3/8”)
1136.7 mm (44 3/4”)
Med.
5.614
117
3R
—
—
—
—
†
09884-01 10000 lbs.
15
1320.8 mm (52”)
0.401
568.5 mm (22 3/8”)
568.5 mm (22 3/8”)
1136.7 mm (44 3/4”)
Med.
6.015
127
3R
—
—
—
—
†
08426-01
14
1270 mm (50”)
0.401
546.1 mm (21 1/2”)
546.1 mm (21 1/2”)
1092.2 mm (43”)
Med.
5.614
113
3R
—
—
—
—
†
10
All
0.447
558.8 mm (22”)”
558.8 mm (22”)
1117.6 mm (44”)
—
4.47
158
4R
—
—
—
†
—
09475-01
8500 lbs.
9000 lbs.
13856-01* 15000 lbs.
NOTE:
All springs except those marked by an asterisk (*) are 76 mm (3”) wide.
Hook location shows leaf number on which hook is located (L - Front End, R - Rear End).
Model 21 uses both hooks in the equalizer.
Models 21B, 101A, 102 - Hooks to the Rear, 101 - Hooks to the Front.
Models 101F, 181 - Front spring hooks to the Front, Rear spring hooks to the Rear.
REYCO™ springs are symetrical
IMPORTANT:
If using Hutchens™ style springs, specific hook placement is required.
Not all Hutchens™ style springs will fit correctly when used in Reyco™ suspensions.
Call factory if using Hutchens™ style springs for correct spring hook alignment.
Hutchens™ springs are asymetrical
CHART E - AXLE SEATS
AXLE SEATS
(With Torque Arm Attachments)
SEAT HEIGHT
MODEL 21B
MODEL 83 - 91
MODEL 74
MODEL 74B
127 mm (5”) Round
AXLE
19.1 mm (3/4”)
25.4 mm (1”)
38.1 mm (1 1/2”)
44.5 mm (1 3/4”)
50.8 mm (2”)
76.2 mm (3”)
82.6 mm (3 1/4”)
101.6 mm (4”)
09730-01
--11336-01*
--08757-01
--
-0636-11
0636-115
-0636-12
0636-13
-0636-04
-13819-01
-------
-15751-01
-------
101.6 mm x 152.4 mm Rect.
(4” x 6”)
19.1 mm (3/4”)
25.4 mm (1”)
44.5 mm (1 3/4”)
50.8 mm (2”)
76.2 mm (3”)
101.6 mm (4”)
T7650
-11352-01
----
-0638-01
-0638-02
0638-03
0638-04
-------
-------
127 mm x 127 mm Sq.
(5” x 5”)
(Shuler)
(Pro-Par)
19.1 mm (3/4”)
25.4 mm (1”)
50.8 mm (2”)
76.2 mm (3”)
82.6 mm (3 3/4”)
101.6 mm (4”)
07980-01*
---08060-01*
--
-13046-01
13046-02
13046-03
-13046-04
-------
-------
146 mm (5 3/4”) Round
19.1 mm (3/4”)
25.4 mm (1”)
-08122-01
---
14473-01
--
-15752-01
NOTE: Underslung components for 101.6 mm x 152.4 mm (4” x 6”) axles not available.
*Also used in Model 21AR
PLAIN AXLE SEATS FOR UNDERSLUNG & STABILIZATION
(Without Torque Arm Attachments)
AXLE
SEAT HEIGHT
“ALL MODELS 3” WIDE SPRING”
“127 mm (5”) Round
25.4 mm (1”)
38.1 mm (1 1/2”)
50.8 mm (2”)
76.2 mm (3”)
10114-01
06370-15
063702
13049-03
127 mm x 127 mm Sq.
(5” x 5”)
“22.4 mm (7/8”)”
09103-01
101.6 mm x 152.4 mm Rect.
(4” x 6”)”
“19.1 mm (3/4”)”
10292-01
STABILIZERS
(for No Hop Suspensions)
AXLE
127 mm (5”) Round
127 mm x 127 mm Sq.
(5” x 5”)”
101.6 mm x 152.4 Rect.
(4” x 6” mm)
21B 1/2 - 22B
T5481
83 1/2 / 91 1/2
15638-01
08061-01
—
—
—
CHART F - MAINTENANCE KITS
21B & 21-1/2B
W / WB / F suspensions (with cast centre hanger)
Description
Equalizer - rebush kit - 2 equalizers - 54" to 65-1/2" axle spacing
Torque Arm - rebush kit - for one end only
Torque Arm - rebush kit - for two torque arms
Torque Arm - rebush kit - for four torque arms
Kit #
TK2203
TK16658
CALL
TK7319
21B FAB, 21-1/2B FAB & 21AR suspensions (all hangers fabricated)
Description
Equalizer - rebush kit - one equalizer - all axle spacings
Torque Arm - rebush kit - for one end only
Torque Arm - rebush kit - for two torque arms
Torque Arm - rebush kit - for four torque arms
83 & 83-1/2
(all fabricated hanger styles)
Description
Equalizer - rebush kit - one equalizer - all axle spacings
Torque Arm - rebush kit - for one torque arm (both ends)
Torque Arm - rebush kit - for four torque arms
91 & 91-1/2
Kit #
TK21196
TK16656
TK16659
suspensions - not 74A or 74B - (all fabricated hangers)
Description
Equalizer - rebush kit - one equalizer - all axle spacings
Torque Arm - rebush kit - for one end only (2-piece bushings #T5493)
Torque Arm - rebush kit - for two torque arms (2-piece bushings #T5493)
Torque Arm - rebushkit - for four torque arms (2-piece bushings #T5493)
74A
Kit #
TK16657
TK16656
TK16659
(all fabricated hanger styles)
Description
Equalizer - rebush kit - one equalizer - all axle spacings
Torque Arm - rebush kit - for one torque arm (both ends)
Torque Arm - rebush kit - for four torque arms
74
Kit #
TK16657
TK16658
Call Factory
TK7319
Kit #
TK16522
TK16658
Call Factory
TK7319
suspensions - not 74 or 74B - (all fabricated hangers)
Description
Equalizer - rebush kit - one equalizer - all axle spacings
74B and 74AR
suspensions - not 74 or 74A - (all fabricated hangers)
Description (4 rigid torque arms)
Equalizer - rebush kit - one equalizer - all axle spacings
Torque Arm - rebush kit - for one end only (1-piece bushings #15737-01)
Torque Arm - rebushkit - for four torque arms (1-piece bushings #15737-01)
23/25/30AR
Kit #
TK16522
Kit #
TK16522
TK16660
TK16661
trailing beam air ride suspensions
Description
Trailing Beam with REY-ALIGN™ hanger - rebush kit - one beam
Trailing Beam with REY-ALIGN™ hanger - rebush kit - two beams
Trailing Beam with HUCK™ bolted hanger - rebush kit - one beam
Shock Replacement Kit - includes Hardware - one beam
Kit #
K701163-1
K701163-2
K701311
Call Factory
CANADA
Tel: 1.905.945.2234
Fax: 1.905.945.5906
USA
Tel: 1.417.862.4343
Fax: 1.417.837.0401
INTERNATIONAL
Tel: 1.417.837.0423
Fax: 1.417.837.0485
E-mail: [email protected] • www.tuthill.com
Form# D-C4 - REV. 112000