New parts update - Steiner Tractor Parts

Transcription

STEINER Tractor Parts, Inc.
New parts update
Summer 2012 issue
CONTENTS:
Ordering & terms....................................................................2
Allis Chalmers..........................................................................2
Case.........................................................................................4
Cockshutt................................................................................6
Ford.........................................................................................6
International............................................................................8
John Deere............................................................................14
Massey..................................................................................19
Minneapolis Moline...............................................................22
Oliver.....................................................................................22
ABC1880 - Top vented fuel cap w/ splash guard & gasket
- $9.95 ea
(Underside view)
Fits: Allis Chalmers Unstyled WC, Unstyled WF, U, UC; IH/Farmall F12, F14, F20, F30, 10-20,
15-30, W-30, Cub, A, B, C, H, M, MTA, Supers, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650,
All I, O, W series, Replaces: 23995DA; John Deere A, AO, AR, B, D, G, H, R, (50 up to SN: 5018449),
(60 up to SN: 6035349), (70 gas up to SN: 7012349), 80, 820 2-cyl., 830 2-cyl., Replaces: AD709R,
AH83351R, AR369R; Massey Harris Colt, Challenger, Mustang, 20, 22, 23, 30, 33, 44, 44-6, 44
Special, 81, 82, 101 Jr., 102 Jr., 101 Sr., 102 Sr., Replaces: 761337M91; Oliver Super 55 SN: 46001
& up, 60, 66, 70, 77, 80, 88, 90, 99 & Supers, 550, 660, 770, 880, 900 Industrial, 950, 990, 995, 1550,
1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2255, OC6;
White 2-44 thru 4-270, Replaces: B824, 161945A, 30-3049558
ABC1878 - Manifold nut & lockwasher set - $1.75 ea
Fits: Allis Chalmers D15 diesel, (D17, D19 gas, LP, diesel), (170, 175 gas, LP); Combines: A2, E,
E3, F, K gas; Industrials: HD3, I60, I600, 510, 512, 610, 612, 614, 616, 621, 622, 801, 802 diesel,
Replaces: 70237091; Case CC, DC series, 400, 500, 600, 700, 730, 800, 830, 900, 930 series gas,
diesel, Replaces: 25-117; Cockshutt E3, E4, E5, 30, 35, 40, 50, 550, 570 gas, diesel,
Replaces: MK244; Oliver 99, 950, 990 gas, Replaces: 915003
(7/16" - 20 NF)
NOTE: Brass nut, yellow zinc lock washer.
It's easy to order from Steiner Tractor Parts
Service, selection and speed: that's our promise to you.
Ordering:
Order by phone, fax, mail, or online at
www.SteinerTractor.com.
Phone: 800-234-3280
Fax: Complete an order form and fax
it to us at 800-854-1373
Terms & Conditions:
• Enclosed is a list of parts that have been introduced in 2012
& are not featured in our current catalog.
• Prices do not include shipping & handling.
• Back orders will be filled when merchandise becomes available.
Email orders to [email protected]
Payment Terms:
American Express, Mastercard, Visa, Discover or
pre-approved accounts are accepted. All other orders
are shipped C.O.D., unless your order is prepaid
including shipping & handling charges. There is a
UPS / Truck Freight fee for all C.O.D. shipments plus
normal shipping & handling charges.
Allis Chalmers
ACS1952 - Standard connecting rod bearing set
(For 1.937" standard rod journal)
Fits the following models w/ 138, 149, 160 in3
gas, LP: D10, D12, D14, D15, H3, I40, I60, I400,
I600, Replaces: 70228486, 70237802
USA made
Price: $64.95 ea
ACS1949 - Complete engine gasket set
w/ crankshaft seals
Fits the following models w/ 138, 149 in3 gas, LP:
D10, D12, D14, (D15 up to SN: 9000), I40, I400,
H3, RT40, Replaces: 70223236, 70229930,
70235202, 70255326
Price: $99.95 ea
ACS1954 - Standard main bearing set
w/ center thrt bearing (Set of 3)
(For 2.749" standard main journal)
Fits the following models w/ 138, 149, 160 in3
gas, LP: D10, D12, D14, D15, H3, I40, I60, I400,
I600, Replaces: 70237651, 70237652, 70237830,
70237831
USA made
Price: $174.95 ea
ABC1996
ABC1996 - Front crankshaft oil seal
ABC2000 - Rear crankshaft oil seal
Fits: D10, D12, D14, D15, H3, I40, I60, I400,
I600 gas, LP
ABC1996 Replaces: 70226620, 70275814
Price: $9.95 ea
ABC2000 Replaces: 70227572
Price: $19.95 ea
ABC2000
2
STEINER New Parts Update Summer 2012 • www.SteinerTractor.com
ACS1912 - Threaded nipple
(For tachometer/operation meter drive)
Fits: D10, D12, D14, (D15 gas, LP, diesel), D17 gas,
LP w/ manual steering, I40, (I60 gas, LP), I400,
(I600 gas, LP), 615 gas, LP, Replaces: 70228769
(Zinc dichromate; 3/4" - 20 pipe thread
to 7/8" - 18, 1.413" long)
USA made
Price: $12.95 ea
ABC2056 - Rear crankshaft seal
Fits: G w/ N62 Continental engine
Replaces: 70800225
Price: $9.95 ea
ACS2037 - 2-piece rear crankshaft main seal
Fits: W, WC, WD, WF, WD45 gas, LP
Replaces: 70224945, 70227120
Price: $8.95 ea
ACS1915 - Adaptor
(For tachometer/operation meter drive)
Fits: D10, D12, D14, D15, D17, I40, I60, I400, I600,
615 gas, LP, Replaces: 70228768
(0.095" key width, .302" O.D., 1.561" o/a length)
USA made
Price: $12.95 ea
ACS1219 - Thermostat housing cover
Fits: WC, WD, WF
Replaces: 70231441, 70262805
Price: $49.95 ea
Available
June 2012
ABC1897 - Wiring harness grommet
Fits: G
Replaces: 70800261
Price: $1.45 ea
NOTE: Also used as plug wire grommet.
ACS1214 - Thermostat housing bypass cover
Fits: WD45, D17, 170, 175; W226 Power Unit
SN: PO97614 & up; Combine: E3, K (All gas)
Replaces: 70226319, 70227017, 70231440,
70262804
Available
Price: $49.95 ea
June 2012
ABC1939 - Starter commutator (brush)
band cover
(For 3-3/4" - 4" O.D. Delco starter housing)
Fits: G w/ Delco starter 1109605, 1109614
Replaces: 1887889
USA made
Price: $14.95 ea
ACS2055 - Pushrod side cover gasket
Fits: WC, WD, WF, W Speed Patrol,
201 Power Units
Replaces: 70218604
Price: $6.50 ea
Allis Chalmers steel fuel lines w/ fittings - Made in Canada. Galvanized (95% zinc, 5% aluminum)
Available
June 2012
ACS2066 - Fits: G
Replaces: 800066
(1/4" tube O.D., inverted flare nuts)
Price: $24.95 ea
Available
June 2012
ACS1974 - Fits: B, C, CA, IB, D10, D12
Replaces: 70207278, 70243108, 70215478
(1/4" tube O.D., 1/4" compression fittings)
Price: $24.95 ea
ACS1866 - Fits: WD45 gas
Replaces: 226281, 70226281
(1/4" tube O.D., standard flare nuts)
Price: $32.95 ea
Mon. - Fri. 8 am - 5 pm EST; Sat. 8 am - 12 pm • Call 1-800-234-3280
3
Allis Chalmers
ACS1913 - Lower generator bracket
Fits: B, C, CA, (D10 up to SN: 3500), (D12 up to
SN: 3000), D14, (W226 Power Unit SN: 96714
& up), Replaces: 70210990
(6.080" o/a length, 1" wide, 0.250" thick,
2 holes = 0.375" O.D., 2 holes = 0.340" O.D.)
USA made
Price: $22.50 ea
ABC1928 - Throw out bearing
Fits: Some B, IB, C, CA (All w/ 8-1/2" dia. clutch),
D10 DN: 3502 & up, D12 SN: 3002 & up, RC, WC,
WD, WD45, Replaces: 70204829
(2.060" I.D., 3.215" O.D., 0.810" thickness)
Price: $34.95 ea
ACS1891 - Seat bumper
Fits the following w/ standard pan style seat:
D10 SN: 2267 & up, D12 SN: 2242 & up, D14,
D15, D17, D19, D21, (170 thru 190XT w/out
deluxe padded seat), Replaces: 70229703,
910880 nut, 904204 washer
(1.043" long, 1.015" dia.)
Price: $14.95 ea
ACS1977 - Step assembly
Fits: CA
(16-1/2" o/a length, 5" pad width, grey primer)
USA made
Price: $59.95 ea
NOTE: Mounts to left side of torque tube.
ACS1177 - Front wheel seal
Fits: B, C, CA, D10, D12
Replaces: 70207362, 70207363, 70207364,
70207365 (Steel & felt, 2.563" O.D.,
1.4735", I.D., 0.5865" tall)
New & improved
Price: $17.95 ea
4
ACS2105 - Rear axle hub rubber oil seal
Fits: RC, WC, WF, W Speed patrol
Replaces: U2533, 70202533, 79016729
(0.795" wide, 9.975" O.D., 8.550" I.D.;
2 used per tractor; Sold individually)
USA made
Price: $48.50 ea
ACS2103 - Brake band return spring
Fits: RC, WC, WF, W Speed patrol
Replaces: U2649, 70202649
(0.747" body O.D., 0.110" wire dia., 3.155" o/a
length; 2 used per tractor; Sold individually)
USA made
Price: $13.85 ea
ACS1995 - Brake drum
Fits: D17 up to SN: 42000, WD, WD45, WD45D
Replaces: 70218573, 70227502, 70232585
(1-1/2" bore w/ keyway, 2.860" wide, 7.875" O.D.,
Price: $79.95 ea
ABC2039 - Outer PTO oil seal
Fits: 'Some' B, C, CA, D10, D12, D14, D15, D17,
D19, H3, HD3, IB, I40, I60, I400, I600, 170, 175,
180, 185, 190, 190XT, 200, 7000 (All w/ 1-3/8"
PTO shaft & single speed PTO)
Replaces: 70224810, 70230608, 70241779
Price: $7.95 ea
Case
CKS1947 - Complete engine gasket set
w/ crankshaft seals
(For engines w/ 4.537" sleeve flange dia.)
Fits the following models w/ 188 in3 diesels
engine SN: 2656844 & up, 207 in3 engines: 310 D
thru 350B, 420 thru 480D, 530 thru 586D, 630
Replaces: A143000, A43198, A44758
USA made
Price: $164.95 ea
Case Standard bearing sets
Description
Price
CKS1964 - Standard main bearing set (set of 3) (For standard 2.250" main journal)
Fits the following models w/ 126, 148 in3 engines up to 1960: 200B, 210B, 211B, 300, 300B, 310B, 310C, 311,
311B, 312, 320, 320B, 420, 420B, Replaces: G11012, G11018, G11036
CKS1958 - Standard main bearing set (set of 5) (For 2.874" standard main journal)
Fits: (310D, E, F, G), 320, 350, 350B, 420, 420B, 420C, 430, 450, 450B, 455B, 470, 480, (480, B, C, D), 530, 570, (580,
B, C, D), (584, C, D), (585C, D), (586, C, D), 630, 1700, 1740, (1835, B), (1845, B), (660 combine), 752 roller, W3,
W3A, W5, W5A all w/ G188D & G207D diesels, Replaces: A36480, A36485, A36490, A36495 USA made
ABC1962 - Standard connecting rod bearing (For 1.9365" standard rod journal)
Fits: V, VC w/ F124 Continental (for cylinders # 1, 3 only), VA, VAC series, 200B, 300, 300B, 310, 310C, 320,
320B, 420, 420B (All w/ connecting rod VT3200, VT4538 & 124, 126, 148 in3 gas engines up to 1960)
Replaces: F600, G312, G11141
$194.95 ea
$108.50 ea
$16.95 ea
$49.95 ea
CKS1956 - Standard connecting rod bearing set (set of 4) (For 2.062" standard rod journal)
Fits: 430, 470, 480, (480B, C, D), 530, 570, (580B, C), 630 (All w/ (G148B using rod # G11176), G159, G188B,
G188D gas, LP, diesels (1960 & up), Replaces: A36500
CKS1960 - Standard connecting rod bearing set (set of 4) (For 2.249" standard rod journal)
Fits: 450B, 455B, 580C, 580D, 584C, 585C, 586C, W11 (All w/ G207 diesels)
Replaces: A50975, A51915 USA made
Fits: VAC, 200B, 300, 310, 320, 400B
(All up to 1960), Replaces: G10005, G13825
Price: $9.95 ea
CKS2052 - Valve grind gasket set
Fits: C, CC, D, DC series (All w/ 260 engines)
Replaces: 4056AA, A189556
Price: $109.95 ea
ABC1955 - Engine oil pan drain plug gasket /
washer fits: 430 thru 570 (All w/ SN: 8262800
& up); Some 480 thru 1570
(Nylon, 0.750" I.D. 0.973" O.D., 0.058" thick)
Price: $1.75 ea
CKS1935 - Flywheel ring gear
Fits: D, DC, S, SC series
Replaces: O5565AB
Price: $89.95 ea
NOTE: 112 teeth.
$49.95 ea
CKS2051 - Clip (Quick release receptacle)
Fits: 430 thru 470, 530 thru 570 (All SN: 8262800
& up); 730, 830 series (All SN: 8253501 & up);
930 SN: 8253501 & up, 1030
Replaces: A36042, L40219
USA made
Price: $2.50 ea
CKS2049 - Quick release grille stub assembly
Fits: 430 thru 470, 530 thru 570 (All SN: 8262800
& up); 730, 830 series (All SN: 8253501 & up);
930 SN: 8253501 & up, 1030
Replaces: A32881, A36042, L40219
(4 used per tractor; Sold individually)
USA made
Price: $9.95 ea
ABC2053 - Hood & dash cage nut
Fits: 200B, 300B, 400, 400B, 430, 500B, 530, 600B,
630, 700, 800, 900, 930, 1030
Replaces: G48002, 131-115 (1/4" - 20 NC)
Price: $1.50 ea
NOTE: Zinc finish.
5
Cockshutt
Mylar decal sets (Includes instructions) - USA made
DEC1957
DEC1959
Ford
FDS1997 - Valve cover gasket (cork)
Fits: 2000 3-cyl., 2600, 2610, 3000, 3600, 3610,
4000 3-cyl., 4600, 4610; Industrials: 230A, 340,
3400, 3500, 3550, 420, 4400, 4500, 515 & more
(All 3-cyl. 1965 up to 5/31/87, gas, LP, diesel)
Replaces: 81817048, C7NN6584B
Price: $6.95 ea
FDS2036 - Camshaft gear (standard)
Fits: 9N, 2N, 8N (All w/ 4-bolt style aluminum
cam gear), Replaces: 91A6256A, 7RA6256A
USA made
Price: $69.95 ea
NOTE: Aluminum finish. 44 teeth.
FDS2040 - Camshaft gear (standard)
Fits: Jubilee, 600, 700, 800, 900, 2000 4-cyl.,
4000 4-cyl. series gas, diesel (1953-64)
Replaces: EAF6256M
USA made
Price: $52.50 ea
NOTE: 42 teeth.
FDS2038 - Crankshaft gear
Fits: 9N, 2N, 8N
Replaces: 48-6306, 486306A, 48-6306A
USA made
Price: $39.95 ea
NOTE: 22 teeth.
6
DEC1961
Description
Price
DEC1957 - For: 20
$119.95 ea
DEC1959 - For: 30
$119.95 ea
DEC1961 - For: 40
$119.95 ea
FDS2042 - Crankshaft gear
Fits: Jubilee, 600, 700, 800, 900, 2000 4-cyl.,
4000 4-cyl. series gas, diesel (1953-64)
Replaces: EAF6306B, 500223
USA made
Price: $49.95 ea
NOTE: 21 teeth.
Fits: NAA thru 4000 4-cyl., 6000 series
Replaces: C0NN6700A
Price: $4.95 ea
Fits: 2000 3-cyl., 2600, 2610, 3000, 3600, 3610,
3900, 3910, 4000 3-cyl., 4110, 4600, 4610, 5000,
5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700,
6710, 6810, 7000, 7610, 7700, 7710, 7810, 7840,
8000, 8600, 9000, 9600, TW5 thru TW35 &
Industrials 230A thru 755B, 1965 & up gas, LP,
diesel, Replaces: C5NN6700A, D5NN6700A,
87802755
Price: $7.95 ea
ABC1955 - Drain plug gasket / washer
Fits the following gas, diesel models (1970 & up):
2000 3-cyl., thru TW35 & others (1970 & up)
Replaces: C9NN6734A, 81822148
(Nylon, 0.750" I.D. 0.973" O.D., 0.058" thick)
Price: $1.75 ea
Ford
FDS2001 - Oil pan gasket
Fits: 2000 3-cyl., 2600, 2610, 2810, 2910, 3000,
3600, 3610, 4000 3-cyl., 4600, 4610; Industrials:
230A thru 555B (3-cyl. gas, LP, diesel) (1965 &
up), Replaces: F0NN6710AA, 83990594
Price: $8.95 ea
ABC1918 - Economy carburetor kit
(For Holley carburetors)
Fits: Ford 2000 3-cyl. thru 5200
w/ Holley LIST2923-1A, LIST2923-2, LIST2923-3,
LIST3012-2, LIST3013-2, LIST3658-2, R2923A,
R2923-1A, R3012-3A, R3013-2, R3013-3, R3655A,
R3656; Fits OEM carbs C5NE9510E, C5NE9510G,
C5NE9510H, C5NE9510J, C5NE9510K,
C5NE9510L, C5NE9510S, C5NN9510F,
C5NN9510L, C5NN9510M, C5NN9510N,
C5NN9510R
Price: $34.95 ea
FDS1921 - Governor compensating spring
Fits: NAA, Jubilee, Golden Jubilee (1953-54)
Replaces: NAA9827B
(8.250" o/a length, 0.435" O.D., 0.059" wire dia.)
Price: $5.75 ea
NOTE: Mounts between bellcrank &
underneath battery tray.
FDS1917 - Governor compensating spring
Fits: 501 thru 4000 4-cyl. gas, LP
Replaces: NCA9827A
(6.535" o/a length, 0.532" O.D., 0.070" wire dia.)
Price: $5.75 ea
NOTE: Mounts between bellcrank &
underneath battery tray.
FDS1990 - Fuel lift pump
Fits: 2000 3-cyl., 2600, 2610, 3000, 3600, 3610,
4000 3-cyl., 4600, 4610, 5000, 6600, 230A thru
5550 gas (All 1965 & up)
Replaces: C5NE9350A, D5NN9350B,
F2NN9350AA
Price: $44.95 ea
FDS1091 - Alternator fan belt
Fits the following w/ front mount distributor:
9N, 2N, 8N up to SN: 263843 (1939-51)
Price: $14.00 ea
FDS1108 - Alternator fan belt
Fits: 501, 600, 700, 800, 900, 1801, 2000 4-cyl.,
4000 4-cyl. series thru 1964
Price: $9.50 ea
FDS1099 - Alternator bracket kit
Fits the following w/ side mount distributor:
Late 8N SN: 263844 & up
Price: $45.00 ea
FDS1103 - Alternator bracket kit
Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801,
2000 4-cyl., 4000 4-cyl. series (thru 1964)
USA made
Price: $45.00 ea
FDS2057 - Thermostat housing gasket
Fits: NAA thru 4000 4-cyl gas, diesel
Replaces: EAF8255A
USA made
Price: $1.45 ea
"Our USA made Ford emblem can be used in the
front grille and steering wheel!"
FDS1894 - Fits: 6000, Replaces: CONN16600A; Serviceable for 6000 Commander
Price: $64.95 ea
7
Ford
FDS1892 - Gear shift lever spring
Fits the following w/ 3 or 4 speed transmission:
9N, 2N, 8N, NAA, 501, 600, 700, 800, 900, 2000,
3000, 4000; Industrial: 340 thru 4500 w/ 4 speed
torque converter transmission
Replaces: 9N7227B
(2.210" tall, 1.768" tapers to 1.003" O.D., 0.140" wire dia.)
Price: $9.95 ea
FDS2007 - Throttle control rod
(governor to carburetor)
Fits: Jubilee thru 4000 4-cyl. gas, LP
Replaces: EAF9818C, 86552618
Price: $14.95 ea
NOTE: Clevis end not included.
ABC1895 - Clutch release bearing spring
Fits the following models w/ 3 or 4 speed
transmission: 9N, 2N, 8N, NAA, 501, 600, 700,
800, 900, 2000, 4000 4-cyl. series (1939-64)
Replaces: 9N7562
Price: $5.95 ea
FDS1610 - Throttle bellcrank friction disc
spring washer
Fits the following gas, LP models: NAA, NAB,
Jubilee, 501, 541, 600, 601, 611, 620, 621, 630,
631 (1953-64), Replaces: NAA99778B
(2-7/16" dia., 7/16" center hole)
Price: $14.95 ea
FDS1870 - Brake drum retaining screw
Fits: 8N - 981 (up to 1959)
Replaces: 24667S, 24667S8
(Zinc; 3/8" - 16 NC x 3/4")
Price: $0.75 ea
FDS1506 - Front axle support pin
Fits: 9N, (2N up to SN: 167488)
Replaces: 2N3126B, 2N3126E, 9N3126A
(4.660" o/a length, 1.750" O.D.)
Price: $44.50 ea
FDS1919 - Piston type hydraulic pump
Fits the following when equipped w/ piston
pump hydraulic manifold: NAA, 501, 600, 700,
800, 900, 2000 4-cyl., 4000 4-cyl.
Replaces: NAA600D, NCA600C, NCA600F
Price: $849.95 ea
NOTE: Can replace your vane style pump
when using piston style hydraulic manifold
lines, not available at Steiner Tractor Parts,
Inc.
FDS2059 - Lower 3-point pin support plate
gasket
Fits: 9N SN: 6019 & up, 2N (mid 1939-47)
Replaces: 9N523B
USA made
Price: $1.45 ea
NOTE: Mounts under axle housing.
International
Available
JuLY 2012
8
IHS963 - 2-piece manifold w/ heat exchanger
Fits: 606, 656, 666, 686, 706, 756, 766,
806, 826, 856, Hydro 70, Hydro 86 gas
Replaces: 85699R1, 367281R1, 384290R2
(Assembled)
Price: $375.30 ea
IHS965 - Manifold heat control weight
Fits: 460, 560, 606, 656, 660, 666, 686,
706, 756, 766, 806, 826, 856 gas
Replaces: 85699R1
Price: $22.50 ea
NOTE: Cast iron.
International
IHS139GK - Manifold gasket set
Fits: F30, W30 gas
Price: $39.95 ea
NOTE: Now includes two more gaskets 33958D & exhaust.
IHS2004 - Valve cover gasket
Fits: 966 thru 4366, 986 thru 4386, 3388 thru 7488; Combines & Industrials using D414, DT414, D436, DT436, DT466 engines
Replaces: 1342828C1
Price: $12.50 ea
IHS1999 - Oil pan gasket
Fits: 966 thru 4366, 986 thru 4386, 3388 thru 7488, Combines & Industrials using D414, DT414, D436, DT436, DT466 engines
Replaces: 671827C1 - C4
USA made
Price: $19.95 ea
IHS1941 - Standard main bearing set
Fits: Cub, Cub Loboy, 154, 184, 185
Replaces: 357219R91, 357216R91
USA made
Price: $54.95 ea
IHS1945 - Standard rod bearing set
Fits the following models up to engine
SN: 261717 using 251246R1 connecting rod:
Cub (1947-64), Cub Loboy (1964-Late 1968)
Replaces: 251248R21, 367873R91
USA made
(.761" bearing width)
Price: $44.95 ea
NOTE: Will not fit engines above SN: 261717 or engines that have been converted to the later connecting rods as these models have a narrower bearing.
IHS2048 - Camshaft gear
Fits the following diesels: 340, 504;
Fits the following gas, LP: 454, 464, 544, 574, 666, 674, 686, 756, 766, 806, 826, 856, Hydro 70, Hydro 86
Fits the following gas, LP, diesel: 460, 560, 606, 656, 660, (706 w/ D282 diesel)
Replaces: 367240R1, 312500R1
USA made
Price: $134.95 ea
NOTE: 54 teeth.
IH / Farmall Crankshaft gears - USA made
Description
IHS2046 - Fits: M, MV & Supers,
MTA, I, O, W, T6 series, 400, 450
gas, LP, Replaces: 45627D
NOTE: 29 teeth.
IHS2050 - Fits: 340 diesel, 504
diesel; 454, 464, 544, 574, 666,
674, 686, 756, 766, 806, 826,
856, Hydro 70, Hydro 86 gas, LP;
460, 560, 606, 656, 660 gas, LP,
diesel; 706 gas, LP, D282 diesel
Replaces: 367272R1
NOTE: 27 teeth.
Price
$94.95 ea
$109.95 ea
$64.95 ea
IHS2044 - Fits: H, HV, I, O, W4
series & Supers 300, 350 gas, LP,
Replaces: 43706D
IHS2062
IHS2062 - Front crankshaft oil seal
IHS2060 - Rear crankshaft oil seal
Fits the following diesel models: 666, 686, 766,
(806 SN: 21597 & up), 856, (886 w/ D360), 966
thru 1566, 986 thru 7488 (All using D312, D360,
Late D361, D407, D414, D436, D466 engines)
IHS2062 Replaces: 690437C91
Price: $24.95 ea
IHS2060 Replaces: 691631C91
Price: $44.95 ea
IHS2060
9
IH / Farmall mufflers - Available Fall 2012
Description
Price
IHS1940 - Fits: A, B, C & Supers, 100, 130, 200, 230, Replaces: 48832DB, 360720R91
NOTE: Polished stainless steel. Baffled like original.
IHS1944 - Fits: H, HV, I4, Super H, Super HV, W4, Super W4, F300, F350
Replaces: 51070D, 350600R95, 355869R1
IHS1923 - Fits: M & Supers, I, T, W6 & Supers, 400, 450 gas, LP, diesel
Replaces: 45805DB, 350601R93, 350601R94, 251116R92, 357288R92, 355870R91, 360078R91
Restoration quality
NOTE: High temperature paint.
IHS1926 - Fits: M, MD & Supers, I, T, W6 & Supers, 400, 450 gas, LP, diesel
Replaces: 45805DB, 350601R93, 350601R94, 357288R92, 355870R91, 360078R91
IHS1930 - Fits: 340 diesel, 460 gas, LP, diesel 504 diesel, 560 gas, LP, diesel, 660 gas, LP, diesel;
Industrials: TD340, 3616, Replaces: 370644R91, 370773R9
Restoration quality
NOTE: High temperature paint. Baffled like original. Has embossed IH part number.
IHS1933 - Fits the following gas, LP, diesel unless noted: 340 diesel, 460, 504 diesel, 544, 560, 606,
656 gear drive, 660, TD340, (500 Crawler SN: H2371 & up), 3514, 3616
Replaces: 370644R91, 370773R91, 403550R1
IHS1929 - Flywheel ring gear
Fits: Cub, 154, 184, 185, 55 T Balers
Replaces: 251270R2
Price: $64.95 ea
NOTE: 84 teeth.
ABC1867 - Muffler clamp (Original style)
Fits: Cub, Cub Loboy
Replaces: 351437R1
(Chrome plated, 1 bolt, 1-3/8" I.D.)
Price: $6.95 ea
IHS1896 - Basic carburetor repair kit
Fits: I6, M, MV, O6, W6 series w/ carb
47387DB, 50983DB & throttle body 6513DX
(3.180" long throttle shaft)
Price: $27.95 ea
$108.50 ea
$118.50 ea
$69.95 ea
$124.95 ea
$69.95 ea
$124.95 ea
IHS1953 - Gasket
Fits as a radiator cap gasket for the following
models: F12 thru F30, I12 thru IK40, Regular, T20
thru TD40, W12 thru WK40, Replaces: 10429D;
Fits as a block inspection cover gasket for the
following models: F20 thru W30, 10-20 thru
22-36, Replaces: 7102-1/8T, 7102T
- 2 used per engine, sold individually
(6-1/2" O.D., 5-1/4" I.D., 0.575" wide, 0.064" thick)
USA made
Price: $8.95 ea
IHS903 - Fuel gauge (Rochester style)
(0-70 OHM)
Fits: 340 diesel only; 460, 560, 660 gas, diesel
(All w/ factory Rochester gauge)
Replaces: 369607R91, R92
Price: $39.95 ea
10 STEINER New Parts Update Summer 2012 • www.SteinerTractor.com
International
IHS1951 - Tachometer / speedometer cable
w/ PVC sheath
Fits: 484 w/out cab, 485 w/out cab, F544 gas,
584 w/out cab, 585 w/out cab, F656 gas, diesel,
666 gas, 674 diesel, 684 w/out cab, 685 w/out
cab, 686 gas, 706 gas & w/ D282 Diesel, 756 gas,
766 gas, 784 w/out cab, 785 w/out cab, 806 gas,
826 gas, 856 gas, 884 w/out cab, 885 w/out cab,
3514 w/ C175 gas, Hydro 70, Hydro 86, H84
& all IH models up to 1985;
Also fits as a speedometer for the following
Hydros: 454, 464, 574, 2400, 2500
Replaces 393326R92, 529234R1
(58-3/8" inner cable length)
Price: $24.95 ea
ABC482 - H4 magneto coil cover w/ IHC logo
Fits: A, B, C, H, M, Supers, I, O, W series,
100, 130, 200, 230, 300, 350, 400, 450, 600,
650; Power Units: U2 - UD14
Replaces: 47449DAY
(Bakelite)
Price: $27.00 ea
IHS1701 - 2-piece adjustable
generator pulley w/ set screw
& lock nut
Fits the following gas, LP models w/ generators
1101355, 1101423, 1100501: H, HV, Super H,
Super HV, M, MV, Super M, Super MV, SMTA,
I4, I6, I9, O4, OS4, O6, OS6, T6 (w/ generator
1101358), T9, W4, Super W4, W6, Super W6,
W6-TA, W9, WR9, WR9S, (W400 gas up to SN:
1147 w/ generator 1100501), (W400 LP up to
SN: 1400 w/ generator 1100997), (I300 up to
SN: 2689), (F300 up to SN: 11002), (F400 gas
up to SN: 13673), (F400 LP up to SN: 13458),
600, (650 w/ generator 1100997)
Replaces: 6745D, 6745DA, 6746D, 6746DA
(Ductile iron, 4.129" dia.)
Price: $44.95 ea
IHS1246BELT - Alternator belt
Fits: H, HV, Super H, W4, O4, I4, Super W4
(1/2" x 30")
Price: $12.00 ea
ABC1939 - Starter commutator (brush) band
cover (For 3-3/4" - 4" O.D. Delco starter housing)
Fits: IH Cub up to SN: 224400, Cub Loboy up to
SN: 18700 (Both using Delco starter 1109603,
1109613)
Replaces: 1887889
USA made
Price: $14.95 ea
IHS1932 - LH Front lower light panel
IHS1934 - RH Front lower light panel
Fits: 786, 886, 986, 1086, 1486, 1586, 3388, 3588,
3788, Hydro 186 (All w/ cab & w/out front cab
lights)
IHS1932 Replaces: 117746C1, 117746C2
IHS1934 Replaces: 11747C2, 117747C1
Price: $49.95 EACH
IHS1794 - Hood ornament
Fits: 666, 686, 766, 966, 1066, 1466, 1468, 1566,
1568, 786, 886, 986, 1086, 1486, 1586, 4366,
4386, 4568, 4586, 4786; Hydros 70, 86, 100, 186
Replaces: 538005R1
Price: $19.95 ea
NOTE: Die cast, chrome plated.
IHS2032 - Stainless steel emblem screw kit
Fits: A, B, H, I4 thru ID9, M, MD, O4 thru ODS6,
W4 thru WDR9 series
Replaces: 350516R1, 141888
Price: $0.95 ea
NOTE: Includes (2) countersunk slotted
flathead scews.
Mon. - Fri. 8 am - 5 pm EST; Sat. 8 am - 12 pm • Call 1-800-234-3280 11
International
IHS2012 - Stainless steel emblem screw kit
Fits: Super A, C, Super C, Super H, Super M, MTA,
Super W4, Super W6, Super W9 diesel series
Replaces: 352581R1
Price: $0.95 ea
NOTE: Includes (2) countersunk slotted
flathead scews.
IHS2087 - Serial number tag w/ rivets
Fits: Cub, Cub Loboy (except 154, 184, 185)
(1956 & up); 100, 130, 140, 200, 230, 240, 300,
330, 340, 350, 400, 404, 424, 450, 460, 504, 560,
600, 606 (thru 1964); 650, 656 (thru 1967); 660,
T340, TD340, Super W9, Super WD9, Super
WDR9, WR9S, W400, W450
(2-1/4" tall x 4" long)
USA made
Price: $18.95 ea
IHS928 - Air cleaner cup bail
Fits: Cub, Cub Loboy
Replaces: 352163R2
USA made
Price: $14.95 ea
IHS1886 - Fuel neck grommet
Fits: Cub Loboy 154, 185, 274, 284
Replaces: 106953C1
USA made
Price: $19.95 ea
IHS2014 - Hood & sheet metal bolt
Fits: 240, 340, 404, 424, 444, 460, 504, 544, 560,
606, F656, (666 thru 1568 as a dash panel bolt)
Replaces: 369222R1
(5/16" - 18 NC x 5/8")
USA made
Price: $3.50 ea
IHS2041 - Hood & side panel rubber washer
Fits: 766 thru 1568, 786 thru 1586, 1026,
Hydro: 100, 186 (All using IHS973 bolt)
Replaces: 536653R1
(1.075" O.D., 0.100" thick, 0.337" hole I.D.)
Price: $0.75 ea
IHS2081 - Fan drive pulley assembly w/ screws
(For cast iron pulleys w/ sealed bearing &
spindle shaft)
Fits: Cub, Cub Loboy w/ engine SN: 165153 & up;
WIll also fit the following when used w/ a water
pump: A, Super A, B, C, Super C, 100, 130, 200,
230, Replaces: 131486C91
(12 - 24 UNC fan screws, 4.379" O.D. rear pulley,
4.062" O.D. front pulley)
Price: $139.95 ea
IHS1381 - Tilt steering wheel cap mounting
plate
Fits: 706, 756, 766, 806, 826, 856, 966, 1026,
1066, 1256, 1456, 1466, 1468, 1566, 1568, Hydro
100 w/ tilt steering, Replaces: 400395R1
(2.940" O.D., 0.485" tall)
Price: $19.85 ea
IHS2095 - Steering wheel horn button spring
Fits: 706, 756, 766, 806, 826, 856, 966, 1026,
1066, 1256, 1456, 1466, 1468, 1566, 1568,
Hydro 100, Replaces: 400396R1
USA made
Price: $3.95 ea
NOTE: This spring is required to maintain
pressure on the cap (IHS852). The cap will
not fit correctly without the spring.
IHS1922 - Steering sector pin stud
Fits the following models w/ manual or power
steering: I300, I330, I340, I350, I460 Utilities;
Fits into sector 365841R91, 372592R91
(1 used per tractor)
Price: $34.95 ea
NOTE: Must weld in place of original.
International
IHS1884 - Clutch kit
Fits the following w/ 11" Rockford clutch
assembly: IH I6, ID6, W6, WD6, M, MD, MV, MDV
Price: $224.95 ea
NOTE: Will not fit over center style clutch.
Includes new disc, pressure plate, throwout
bearing, pilot bearing and alignment tool.
Fits: I6, ID6, M, MD, MDV, Super M, Super MD,
Super MV, Super MDV, W6, WD6, Super W6,
Super WD6
Replaces: 48974D, 618237R91, 649106R91
(2.260" I.D., 3.650" O.D., 0.800" thickness)
Price: $34.95 ea
ABC1928
IHS1155
IHS1155 - Clutch release bearing carrier
Replaces the graphite style (non-replaceable)
throwout bearing and carrier #350830R31 used
on the following early models: A, Super A, B, BN,
C, Super C; Direct replacement for the following
when equipped w/ replaceable throwout
bearing: A, Super A, B, BN, C, Super C, 100, 130,
140, 200, 230, 240, 404, 2404
ABC1928 also fits: H, W4, Supers
ABC1928 Replaces: 18567D, 55211D, 55212D,
361292R91
(2.060" I.D., 3.215" O.D., 0.810" thickness)
Price: $34.95 ea
IHS1155 Replaces: 6116D
Price: $64.95 ea
IHS1861 - New clutch disc
Fits: Cub Loboy 154, 184, 185
Replaces: 404640R93
(5-1/2" O.D., 10 splines, 0.937" spline dia.)
Price: $49.95 ea
IHS1864 - New clutch pressure plate
Fits: Cub Loboy 154, 185
Replaces: 404639R94
(5-1/2", 3 spring)
Price: $114.95 ea
IHS1653 - Clutch drive shaft
Fits the following models w/out creeper gear:
Cub Loboy 154 SN: 18709 & up, 185
Replaces: 543603R1
(Oiled steel, 1.060" dia. x 29" long)
Price: $189.95 ea
IHS1908 - Shift pattern plate
Fits: Cub Loboy 154, 184, 185,
Cub Cadets: 72, 73, 86, 104, 106, 108, 124, 126,
128, 582, 800, 1000, 1200
(1-5/8" O.D.)
USA made
Price: $7.95 ea
IHS1633 - Toolbox
Fits: Cub w/ Deluxe seat, Cub Loboy
Replaces: 364072R91
USA made
Price: $29.50 ea
"Our IHS1234 pressure plate is superior to the original!
It is made with ductile iron instead of grey iron, increasing the tensile
strength by over 100% and more importantly allowing for a significant
yield strenth. Cast iron is not flexible and shatters easily, whereas ductile
iron is more flexible and elastic."
IHS1234 - Fits: Cub Loboy 154, 185
Replaces: 531708R11
(Ductile, 5-1/2", 3 spring)
Price: $79.95 ea
International
John Deere
IHS1888 - Torque amplifier handle spring
Fits: Super MTA, Super W6TA, F300, 330, 340,
F350, 400, W400, 450, W450, 460, 504, 606, 660,
2504, 2606
Replaces: 359920R1, 359920R2
USA made
Price: $6.50 ea
ABC2067 - Rear crankshaft oil seal
Fits: (Late 3010), 3020, 4000, (Late 4010), 4020,
4040, 4050, 4055, 'Some' 4230 thru 6030, 7020
thru 9100
ABC2064 Replaces: AR49025
Price: $19.95 ea
NOTE: See website for full applications.
IHS2077 - Torque amplifier control cable
Fits: 786, 886, 986, 1086, 1486, 1586, 3388, 3588,
3788, Replaces: 120003C1, C2
(29-1/4" o/a length, 1/4" - 28 NF threaded end)
Price: $29.95 ea
IHS1924 - Hydraulic pump gear
Fits: Super A, Super A1, Super AV1, C, Super C,
100, 130, 140, 200, 230, 240, 330, 340 gas, 404,
424 gas, 444 gas, 2424 gas, 2444 gas, 500 gas
Crawler w/ 9 GPM side engine mounted pump,
T340 gas w/ 9 GPM side engine mounted pump,
T4 & T5 gas w/ 9 GPM side engine mounted
pump, Replaces: 350709R1
Price: $109.90 ea
NOTE: 16 teeth.
ABC2008 - Oil seal
Fits as a transmission counter shaft front seal for
H, Super H, Replaces: 356502R91, 356503R91;
Fits as a flat belt pulley shaft seal for A, B, C,
Supers, 100, 130, 140, 200, 230, 240
Replaces: 48954D, 71700C1
Price: $11.95 ea
REP2083 - M & W clutch reprint operators
manual & parts list (12 pages)
Fits: M, MD, W6, WD6; Parts list also covers H,
W4, Super M, Super MD, Super H
Printed in USA
Price: $9.95 ea
ABC2064
ABC2067 Replaces: RE520036
Price: $29.99 ea
ABC2067
JDS2005 - Oil filter lower sealing plate
Fits: M series, 40, 320, 330, 420, 430, 440 gas, LP;
1010, 2010 up to SN: 42000 gas, LP, diesels &
Power Units (All w/ cartridge type filters)
Replaces: M88T
(3" dia.)
USA made
Price: $8.95 ea
ABC2026 - Oil drain plug washer
(For engine, transmission, etc.)
Fits: 50 thru 840 2-cyl., 3010 thru 9120;
Also fits as a transmission / rear end drain plug
washer: 300 thru 8630, Replaces: A4827R
(1.257" O.D., 0.058" thick, 1.002" hole I.D.;
Sold individually)
Price: $1.49 ea
NOTE: Aluminum.
JDS1988 - Basic carburetor repair kit
Fits: 3010, 3020 w/ Marvel Schebler USX21,
USX31, USX36, USX49SL, Replaces: JD carbs
AR26432R, AR32639R, AR39702R, AR45161R,
AR34242R, AR28636R
Price: $39.95 ea
"Our 12-volt positive ground fuel gauge and sending unit are calibrated
to the original resistance (0-30 Ohms)"
JDS1707 - Fuel gauge
Fits: 520, 530, 620, 630, (720, 730 gas, diesel
w/ electric start), (820, 830 w/ electric start)
Replaces: AF2721R
Price: $39.95 ea
JDS1712 - Fuel sender
Fits: 520, 530, 620, 630 (GP, Standard,
Orchard), 720, 730 2-cylinder
Replaces: AF2173R, AB5139R
USA made
Price: $49.95 ea
JDS1992 - Basic carburetor repair kit
Fits: 4010, 4020 w/ Marvel Schebler USX20,
USX30, USX35, USX48SL, Replaces: JD carbs
AR30280R, AR32636R, AR52450R, AR34244R,
AR10110R, AR45160R
Price: $39.95 ea
JDS1910 - 6-volt positive ground fuel gauge
(0-30 Ohms)
Fits the following w/ Pony engine start:
70D, 80, 720D, 730D, 820, 830
Replaces: AF2170R, AF2739R
Price: $39.95 ea
IHS1574 - Glass bowl
(For water trap / fuel strainer)
Fits: R, 80, 820 2-cylinder, 830 2-cylinder,
840 2-cylinder, Replaces: AR799R
(2-7/8" O.D., 4" long)
USA made
Price: $24.95 ea
ABC1221 - Gasket (For fuel cap) (cork)
Fits: R, 80, 820 2-cylinder, 830 2-cylinder,
840 2-cylinder, (1640 2040, 2040S, 2140,
3040, 3140 - All SN: 430000 & up), (2040
Utility SN: 350000 & up), 2150, 2155, (2240
SN: 350000 & up), 2255, 2350, 2355, 2355N,
2555, 2750, 2755, 2940, 2950, (2955 up to
SN: 765516), 3055, 3150, 3155, 3255, 3640
(2.242" I.D., 2.948" O.D.)
USA made
Price: $4.95 ea
JDS950 - Fuel filter repair kit
Fits: Late A, 50, 60, 70, 520, 530, 620, 630, 720, 730 gas; Will also fit 80, 720D, 730D, 820, 830, 840 with a fuel shut off valve for Pony motors
USA made
Price: $15.00 ea
NOTE: Made from NBR, the diaphragms in this kit are built to withstand the ethanol
in today’s blended gasoline so they will not distort!
JDS1975 - LH front fender light panel
JDS1971 - RH front fender light panel
JDS1973 - LH rear fender light panel
JDS1969 - RH rear fender light panel
(For tractors w/ sound guard body or open station)
Fits: Late 2140 thru 2955, 3040 thru 3350,
4030 thru 4955 (1973 & up)
JDS1975 Replaces: R81697, AR84970
JDS1971 Replaces: R81696, AR84969
(15-3/4" long x 9" wide x 6-1/2" deep)
Price: $56.50 EACH
JDS1975
JDS1971
JDS1973
JDS1969
JDS1973 Replaces: R52562
JDS1969 Replaces: R52561
(11-1/2" long x 6-7/8" x 1-5/8" deep)
Price: $26.50 EACH
JDS1625 - Starter rod bushing
(Mounts on top of flywheel cover)
Fits: B SN: 201000 & up, 50, 520
Replaces: B2287R
(0.406" I.D., 1.000" O.D., 0.505" thick)
USA made
Price: $19.95 ea
John Deere governor springs
(speed change springs) - USA made
Description
JDS1066 - Fits: A SN: 424025 583999; AR, AO SN: 251486 &
up; B up to SN: 200999, BR, BO,
H, Replaces: B273R
JDS1068 - Fits: A SN: 584000
& up, G, 60, 60 Standard SN:
6043000 & up 70, 620, 630, 720,
730 , Replaces: A1491R, A3408R
Price
$34.95 ea
JDS1900 - Clutch linkage pin
Fits: B, H, 50
Replaces: B178R
(1/2" dia. Use 1/2" drill to ream original hole;
2 required; Sold individually)
USA made
Price: $5.95 ea
NOTE: Oversized to compensate for worn out
linkage & holes.
$37.50 ea
$34.95 ea
JDS1070 - Fits: B SN: 201000
& up, 50, 520, 530, (R w/ Pony
motor), Replaces: B2636R
JDS827 - Gear shift lever
Fits: 420 (except Crawler) SN: 125000 & up,
430 (All), 435, 440, Replaces: M4284T
(7/16" - 14 UNC thread pitch)
USA made
Price: $94.95 ea
JDS826 - Gear shift lever
Fits: A SN: 648000 & up, 60, (60 Standard
SN: 604300 & up), 620, 630
Replaces: A4565R, A4010R
USA made
Price: $68.50 ea
NOTE: JDS586 knob is sold separately.
JDS1902 - Clutch linkage pin
Fits: A, D, G, R, 60, 70, 520, 530, 620, 720, 730
Replaces: D1994R
(9/16" dia. Use 9/16" drill to ream original hole;
2 required; Sold individually)
USA made
Price: $8.95 ea
NOTE: Oversized to compensate for worn out linkage & holes.
JDS2089 - Clutch drive disc
Fits: A series up to SN: 647999,
(AO, AR up to SN: 273079)
Replaces: A19R, AA232R, AA2279R, A2448R
Price: $164.95 ea
JDS1599 - Clutch pulley cover retaining spring
w/ rivet
Fits: 70, 720, 730 gas, LP, diesel
Replaces: F1391R & 16H644 (rivet)
(2.579" long, 1.040" wide, 0.263 hole,
USA made
Price: $12.50 ea
JDS1931 - Transmission gear shift lever
Fits: 2520, (3020 SN: 123000 & up),
4000, (4020 SN: 201000 & up), 4320
(All w/ Syncro range transmission)
Replaces: R46285
(16-1/2" long)
Price: $89.95 ea
JDS2009 - PTO clutch adjusting cover gasket
Fits: 520, 530, 620, 630, 720, 730
Replaces: F2883R, R21113R
USA made
Price: $4.95 ea
"Our JDS2219 & JDS2223 USA made floor matting for open station tractors
consists of a heavy duty 3/8" rubberized closed cell foam base w/ a 1/8"
durable textured rubber top. Between these two layers is a PVC sounddeadening barrier. This industrial grade matting will provide years of use in
high wear conditions while maintaining its sound and vibration dampening
qualities. Trim for a final fit, can be glued to the foot platform."
JDS2219 - Fits: 2520, 3020, 4000, 4020, 4320, 500A; Serviceable for 3010, 4010 (All w/ syncro range transmissions)
Price: $94.95 ea
JDS2223 - Fits: 2520, 3020, 4000, 4020, 4320, 500A (All w/ powershift transmissions)
Price: $94.95 ea
TEXTURED RUBBER TOP
PVC SOUND BARRIER
CLOSED CELL FOAM
John Deere PTO clutch housing cover
gaskets - USA made
Description
Price
JDS2011 - Fits: 50 w/ engine
driven PTO (live PTO)
Replaces: B3196R
JDS2013 - Fits: 60, (60 Standard
SN: 6043000 & up), 70, 70
Standard All w/ engine driven
PTO (live PTO)
Replaces: A4584R
JDS2015 - Fits: 520, 530
All w/ engine driven PTO
(live PTO), Replaces: B3768R
JDS2017 - Fits: 620, 630
(live PTO), Replaces: A5688R
JDS2019 - Fits: 720, 730
(live PTO), Replaces: F2968R
$9.95 ea
$9.95 ea
JDS2031 - PTO shaft oil seal housing gaskets /
shims (Sold in a 5 pack)
Fits: 60 SN: 6025404 & up (5 used); 70 gas
(5 used); 70 diesel (2 used); 520 thru 730 (8 used)
All w/ engine driven PTO (live PTO)
Replaces: F1459R, F1460R
USA made
(0.006" thick)
Price: $8.95/pack of 5
NOTE: Paper.
$11.95 ea
$11.95 ea
$9.95 ea
JDS2021 - PTO shaft oil seal housing gasket
Fits: A series SN: 488000 & up, (AO, AR w/out
Powertrol), B series SN: 201000 & up, G series
SN: 43352 & up, R, 50; Also fits some 60, 70 series
w/ transmission driven (non live) PTO
Replaces: A2396R
USA made
Price: $2.50 ea
JDS2033 - PTO oil seal housing shim
Fits: 60 SN: 6025404 & up; 70; 520 thru 730
(2 used) All w/ engine driven PTO (live PTO)
Replaces: F1461R
USA made
(23 gage steel, 0.018" thick; Sold individually)
Price: $5.95 ea
JDS2027 - PTO 3-bolt bearing cover gasket
(For PTO clutch shaft)
Fits: 50, (60 Rowcrop up to SN: 6025403)
All w/ engine driven PTO (live PTO)
Replaces: A4553R
USA made
Price: $8.95 ea
John Deere
Fits: 60 Rowcrop & Highcrop SN: 6025404 & up,
60 Standard, (60 Orchard SN: 6025000 & up), 70
gas, LP up to SN: 7014799 All w/ engine driven
PTO (live PTO), Replaces: F1457R
USA made
Price: $8.95 ea
Fits: 70 gas, diesel SN: 7014800 & up w/ engine
driven PTO (live PTO), 520, 530, 620, 630
Replaces: F1542R
USA made
Price: $8.95 ea
Fits: 720, 730 series
Replaces: F2964R, F3400R
USA made
Price: $8.95 ea
ABC2008 - PTO shaft seal
Fits: A series SN: 488000 & up, (AO, AR SN:
260000 & up), B series SN: 149700 & up, (BO, BR
SN: 333100 & up), G series SN: 43352 & up, R, 50,
60, 70, 520, 530, 620, 630, 720, 730
Replaces: AA2296R;
Also fits as a rear PTO seal: 3010, 4010
Price: $11.95 ea
ABC2039 - Outer PTO oil seal
Fits: M, 40, 320 thru 440, 820 3-cyl. thru 2640
Replaces: AM253T, T22069
Price: $7.95 ea
IMAGE NOT
AVAILABLE
ABC2043 - PTO output shaft inner seal
Fits: 40H, W, 320, 330, 420C, H, I, U, W, 430C, H, I,
U, W, 435, 440, 1010 w/ single 540 PTO
Replaces: C3970E, AM2553T
Price: $5.95 ea
ABC2047 - Inner PTO bearing
Fits: (40H, 40W both SN: 60001 & up), 320, 330,
420C, H, I, U, W, 430C, H, I, U, W, 435, 440, 1010
w/ single speed PTO
Replaces: JD7198T
Price: $19.95 ea
JDS2045 - PTO output shaft outer bearing
Fits: Late 40C, 40H, U, W, 320, 330, 420C, H, I, U,
W, 430C, H, I, U, W, 435, 440, 1010 (All w/ single
speed 540 PTO assy.)
Replaces: JD8819T, AM2119T
(1 used per PTO; Sold individually)
Price: $17.95 ea
JDS2045 - Transmission PTO driven gear
bearing
Fits: 420 H, I, U, W, 430 H, I, U, W, 435, 440
(All w/ 5 speed transmission)
Replaces: JD8819T, AM2119T
(2 used per gear; Sold individually)
Price: $17.95 ea
JDS1758 - Rear axle felt seal
Fits: A, AN, AW up to SN: 547321, ANH, AWH SN:
583999 & up, 60 Orchard, Standard only, (620,
630 both Orchard only), Replaces: A380R
(4.683" O.D., 3.50" I.D., 0.425" thick)
USA made
Price: $24.95 ea
Correct your catalog! Fits A up to SN: 547321,
ANH, AWH SN: 583999 & up. Does not fit
50, 520, 530.
John Deere
Fits: A, AN, AW SN: 547322 & up; 50, 520, 530
(All w/ 88" tread), Replaces: AA3657R, A3043R
(4.656" O.D., 3.375" I.D., 0.438" thick;
USA made
Price: $24.95 ea
Fits: D, G, R series, 60, 70, 80, 620, 630, 720,
730, 820 2-cyl., 830 2-cyl., 840 2-cyl. & some
Highcrops & Standards
Replaces: AD1275R, D2455R
(5.438" O.D., 3.969" I.D., 0.500" thick,
USA made
Price: $24.95 ea
JDS2035 - Brake housing gasket
Fits: A up to SN: 583999, (AI, AO, AR up to SN:
271999), Replaces: A413R
USA made
Price: $4.95 ea
ABC2039 - Differential brake pinion shaft inner
bearing seal fits: 40 thru 440, 1010
Replaces: AM253T, T22069
Price: $7.95 ea
JD21 - I & T service manual
For: 1010, 2010
Price: $31.95 ea
Massey standard bearing sets
Description
Price
MFS1946 - Standard main bearing set (set of 3, includes center thrust bearing)
Fits: TE20, TO20, TO30, 35, F40, 50, 135, 150, 230, 235, 245; Industrials: 202, 204, 2135, 2200, 2500, 4500,
MF20C, MF30B (All w/ Z120, Z129, Z134, Z145 4-cyl. Continental gas engines), Replaces: 837155M91,
830633M92
MFS1950 - Standard main bearing set (set of 3, includes center thrust bearing)
Fits the following models w/ G176 4-cyl. Continental gas, LP engine: 65, 165, 3165, 302, 304, 356
Replaces: 830752M91
ABC1962 - Standard connecting rod bearing (For 1.9365" standard rod journal)
Fits: 20, Colt, 22, 23, Mustang, 30, 81, 82, 101 Jr., 102 Jr. w/ F124, F140, F162 Continental
(for cylinders # 1, 3 only), Replaces: 35000A
MFS1943 - Standard connecting rod bearing set (set of 4) (For 1.937" standard rod journal)
Fits: TE20, TO20, TO30, 35, F40, 50, 135, 150, 230, 235, 245; Industrials: 202, 204, 2135, 2200, 2500, 4500,
MF20C, MF30B (All w/ Z120, Z129, Z134, Z145 4-cyl. Continental gas engines), Replaces: 830486M91
USA made
MFS1948 - Standard connecting rod bearing set (set of 4) (For 2.062" standard rod journal)
Fits the following models w/ G176 4-cyl. Continental gas, LP engines: 65, 165, 3165, 302, 304, 356,
Replaces: 830750M91, 1754025M91 USA made
$114.50 ea
$249.95 ea
$16.95 ea
$39.95 ea
$84.95 ea
Massey
MFS2028 - Camshaft gear (standard)
Fits: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, 135, 150, 202, 204, 2135, 2200, 2500
(All w/ Z120, Z129, Z134, early Z145 4-cyl.
Continental gas engines)
Replaces: 1750237M1
USA made
Price: $79.95 ea
NOTE: 48 teeth.
MFS2002 - Timing gear cover gasket
Fits: TE20, TO20, TO30 (All w/ Z120, Z129
Continental engines)
Replaces: 1750274M1
USA made
Price: $2.75 ea
MFS2006 - Timing gear cover gasket
Fits: TO35, MF35, F40, MH50, MF50, 135, 150,
230, 235, 245; Industrials: 202, 204, 2135, 2200,
2500, 4500, MF20C, MF30B (All w/ Z134, Z145
4-cyl. Continental gas engines)
Replaces: 1750032M1
USA made
Price: $2.85 ea
MFS2030 - Crankshaft gear
Fits: TE20, TO20, TO30
(All w/ Z120, Z129 Continental gas engines)
Price: $49.95 ea
MFS2034 - Crankshaft gear
Fits: 35, 40, 50, 135, 150, 202, 204, 230, 235,
245, 2135, 2200, 2500, 4500, MF20C, MF30B
(All w/ Z134, Z145 Continental gas engines)
Replaces: 1750054M1
USA made
Price: $38.95 ea
NOTE: 24 teeth.
MFS1986 - Crankshaft seal kit
Fits: TE20, TO20, TO30, TO35, F40, MF50, 135, 150, 202, 204, 230, 235, 245, 2135, 2200, 2500 (All w/ 4-cyl. Continental gas); Also fits: Z120, Z129, Z134, Z145, Replaces: 15287A, 15288A, 1750112M1, 1750216M1
Price: $19.95 ea
NOTE: Contains front & rear crankshaft seals, felt & gasket for rear seal retainer.
Fits: Pony, TE20, TO20, TO30, TO35, F40, MF50,
135, 150, 202, 204, 230, 235, 245 w/ 4-cyl.
Continental gas
Replaces: 1750216M92
Price: $9.95 ea
ABC1955 - Drain plug gasket / washer
Fits the following models w/ Perkins gas, diesel:
35 thru 3660
Replaces: 1476281X1, 1476184X1, 2411260,
2411287, 735088M1
(Nylon, 0.750" I.D. 0.973" O.D., 0.058" thick)
Price: $1.75 ea
ABC1903 - Basic carburetor kit
(For Carter carburetor)
Fits: 35, 40, 50, 202 w/ cast iron upper body #
0-834, 0-839 & carb UT2223S, UT2402S; Will also
fit TO30 w/ UT997S, UT2709S, but must reuse
old throttle shaft or modify new one; Also fits
35, 40, 50 w/ aluminum upper throttle body &
carb UT2418S
(5/16" - 24 UNF seat)
Price: $24.95 ea
NOTE: Uses needle seat # 25-33, 31-500.
MFS1899 - Complete carburetor repair kit
Fits: TE20, TO20 w/ Marvel Schebler carb
TSX 312, 361, 361A
Replaces: TO18375A
Price: $69.95 ea
Massey
MFS1901 - Complete carburetor repair kit
Fits: TO30 w/ Marvel Schebler carb TSX458
Replaces: TOD18375
Price: $69.95 ea
ABC1898 - Thermostat
Fits: 33, 44, 44 Special, 55, 333, 444, 555 gas, LP
Replaces: 185201M2, 830873M93, 1002521M91
Price: $19.95 ea
NOTE: Gasket not available thru Steiner
Tractor Parts, Inc.
ABC1897 - Wiring harness grommet
(For dash & fuel tank support)
Fits: 30, 33, 44, 44-6, 44 Special, 55, 333, 444, 555
Replaces: 19530X, 764194M1, 765194M1
(3 to 5 used per tractor; Sold individually)
Price: $1.45 ea
band cover
Fits: TO20, TO30, (Early TO35 up to SN: 161250
using Delco starter 1109457
Replaces: 1750487M91
USA made
Price: $14.95 ea
MHS1938 - Hood, grille, side shield screw set
Fits: MH Pony, Pacer
(Stainless steel)
Price: $14.95 ea
MFS1723 - Air intake tube adaptor
Fits: MH 40, F40, MF40 gas
Replaces: 182861M1
Price: $39.95 ea
MFS1965 - Shift lever boot
Fits: 35 thru 175, 230 thru 298, 350 thru 399, 550
thru 590, 690, 698; Industrials: MF20 thru MF60,
202 thru 6500
Replaces: 520858M1, 1678565M1
(.510" hole dia., 1.600" bottom I.D.)
Price: $3.50 ea
NOTE: Correct width for tractors w/ two shift
levers.
ABC1895 - Clutch release bearing spring
Fits: TE20, TEA20, TO20, TO30
Replaces: TO7562, 181622M1
Price: $5.95 ea
MFS1994 - Clutch kit
Fits: Some TE20, TEA20, TO20, TO30
Replaces: 180241M91, 180250M91, 180263M91,
183209M91, 185923M91, TO7550, TO7563
(9" dia., 10 spline, 1-3/8" across splines on
clutch disc, Includes: new spring loaded clutch
disc, pressure plate, throwout bearing, pilot
bearing, clutch alignment tool)
Price: $169.95 ea
NOTE: Measure clutch spline diameter prior
to ordering. Some tractors were 1-1/8" across
clutch splines.
MFS2091 - Clutch kit
(For tractors w/ forged fingers,
not stamped steel fingers)
Fits: Some MF 20 Industrial SN: 9A130430 & up,
Some TO35 SN: 177395 - 177519 & SN: 177538
& up, MF35, MF40 Industrial SN: 9A130430 &
up, MF50 SN: 515396 & up, (135, 150 w/ 10
spline PTO disc), 202 SN: 311321 & up, 203 SN:
659002841 & up, 2135, 2200
Replaces: 193930M92, 512355M91, 516068M93,
526666M93
(11" dia., 10 spline rigid disc, 11" 10 spline
double clutch pressure plate, Includes: disc,
pressure plate assy., pilot bearing, throwout
bearing, alignment tool)
Price: $298.50 ea
NOTE: Check your pressure plate finger style
& PTO clutch spline count prior to ordering.
Massey
Oliver
MHS1906 - 9" pivot support rod
Fits: Some 33, 44, 44-6
Replaces: 1000018M1
(10.656" o/a length)
USA made
Price: $28.95 ea
OLS1968 - Standard main bearing set
(set of 7, includes thrust bearing)
(For 2.625" standard main journal
w/ 1-1/2" wide thrust bearing)
Fits: (1650, 1655 both diesel), 1750, 1755, (1800
SN: 124396 & up), (1850 gas, LP), 1855, (1950
gas, LP), 1950T, 1955; White: (2-70, 2-78 both
diesel); Fits Some 283, D310 in3 engines using
1-1/2" wide thrust bearing
Replaces: 156406A, 156407A, 30-3109887
USA made
Price: $199.95 ea
MFS1874 - Brake drum retaining screw
Fits: TE20, TO20 thru 245
(All w/ shoe style brakes)
Replaces: 182278M1, TO1127
(Zinc; 1/2" - 13 NC x 3/4")
Price: $0.99 ea
Minneapolis Moline
OLS1968 - Standard main bearing set
(set of 7, includes thrust bearing)
(For 2.625" standard main journal
w/ 1-1/2" wide thrust bearing)
Fits: G750 diesel, G850, G940
Replaces: 156406A, 156407A, 30-3109887
USA made
Price: $199.95 ea
OLS1966 - Standard rod bearing set (set of 6)
Fits: G750 diesel, G850, G940
Replaces: 102700A, 168382A, 168916A,
30-3137589
USA made
Price: $99.95 ea
NOTE: See website for full application listing.
Bearings have 3 oil holes total (1) center & (2) offset.
ABC1962 - Standard connecting rod bearing
Fits: Super 44, 440 w/ F140 Continental engines
(for cylinders # 1, 3 only); 70 w/ Continental
DS202 engine (for cylinders # 1, 3, 5)
Replaces: 1BS217, B217, BA217
Price: $16.95 ea
OLS1966 - Standard rod bearing set (set of 6)
Fits the following gas, LP, diesel models unless
noted: Super 88 SN: 650 & up, 880, 1600, (1650,
1655 diesel), 1750, 1755, 1800, (1850 gas, LP),
1855, (1950 gas, LP), 1950T, 1955;
White: (2-70, 2-78 diesel); Also fits: Some 231,
265, 283, 310 in3 engines (2 different standard
journal sizes could be used. Verify journal size
before ordering), Replaces: 102700A, 168382A,
168916A, 30-3137589
USA made
Price: $99.95 ea
NOTE: Bearings have 3 oil holes total (1) center & (2) offset.
ABC1903 - Basic carburetor kit
(For Carter carburetor)
Fits: 55, 66, 77 w/ cast iron upper throttle body 0-834 & carb UT923S
(5/16" - 24 UNF seat)
Price: $24.95 ea
NOTE: Uses needle seat # 25-33, 31-500.
Oliver
ABC1898 - Thermostat
Fits: 85, 88, Super 90 gas, LP; Industrials:
406, 1001 gas, LP; Serviceable for 33 thru 555 diesels, but 160o instead of 180o
Replaces: 185201M2, 830873M93, 1002521M91
Price: $19.95 ea
NOTE: Gasket not available thru Steiner
Tractor Parts, Inc.
band cover
Fits: 60 w/ Delco starter 1109452
Replaces: H7724
USA made
Price: $14.95 ea
OLS110 - Steering wheel
(For Saginaw power steering)
Fits: Late 550 (1977 & up) 1550, 1555, 1650,
1655, 1750, 1755, 1850, 1855, 1950, 1950T,
1955, 2050, 2150, White: 2-44 Backhoe, 2-62
Replaces: 159082A
(15" dia., 36 splined hub, 11/16" shaft,
3 covered spokes, dished)
Price: $59.95 ea
2012 price changes
Part #
2012 retail
IHS005VGK...............................................................$38.65 ea
IHS139GK..................................................................$39.95 ea
IHS1227.....................................................................$12.95 ea
JDS194L.....................................................................$429.95 ea
JDS194R....................................................................$429.95 ea
JDS461.......................................................................$339.95 ea
MMS025....................................................................$59.95 ea
The following parts have been
discontinued.
Description
ABC046..................... Oil filter (tri-pack)
ABC078..................... Wiring harness (Main harness only)
Replaced with FDS376
ACS166..................... Governor
BOK058..................... John Deere New Generation Tractors
BOK1732.................. John Deere 2-Cyl. Tractor Buyers Guide
BOK1733.................. Farmall Regular & F-series Collectors
Guide
BOK1748.................. Original Farmall Cub & Cub Cadet
DEC371..................... Cockshutt 30 vinyl cut decal set
Replaced with DEC1959
DEC386..................... Massey Harris 101 Senior mylar decal set
DEC395..................... Ford 681 Select-O-Speed hood decals
FDS037..................... Radiator, Replaced with FDS1859
FDS142..................... Axle weights, 2 piece set
IHS027....................... LH final drive axle housing
IHS1236.................... Offset exhaust manifold adaptor
IHS152....................... Flywheel w/ ring gear
IHS477....................... Starter hand crank w/ pin
IHS616....................... Lever / handle only
IHS621....................... Fan shroud
JDS1836................... Tachometer cable
JDS1838................... Tachometer cable
JDS1907................... Auxiliary step assembly
JDS436...................... All fuel manifold
JDS976...................... Radiator guard
MFS015..................... Exhaust manifold
MFS015GK............... Exhaust manifold gasket
MHS011.................... 4-piece side panel set
MHS011CD.............. RH / LH rear side panels
MHS011D................. LH rear side panel
MHS055.................... Chrome straight pipe
MM2AR..................... Operator's & maintenance manual
OLS087..................... Bottom seat cushion
OLS095..................... Exhaust manifold elbow
OLS115..................... Middle seat cushion
REP074...................... Silver King service manual
REP076...................... Silver King operator's manual & parts list
WHS045.................... Front wheel
It's easy to order from
Steiner Tractor Parts!
Service, selection and speed:
that's our promise to you.
New parts for old tractors
1660 South M-13
Lennon, Michigan 48449
Order by phone, fax, mail, or online at
www.SteinerTractor.com
Phone: 800-234-3280
Fax: Complete an order form and fax
it to us at 800-854-1373
Email orders to [email protected]
Open today to update
for new products:
• Price changes
• Close-outs
“Replace worn or damaged
John Deere nose cone screens
with USA made replacements.”
Exact of originals • Powder coated
JDS2071
JDS2075
JDS2071 - Fits: 4320, Replaces: AR48449
Price: $104.95 ea
JDS2075 - Fits: 4520, 4620, 7020
Replaces: AR43009
Price: $119.95 ea
JDS2079 - Fits: 5010, 5020, 6030, 7520
Replaces: AR35025
Price: $129.95 ea
“Our new IHS2225 IH 450 LP high
compression cylinder head bolts on
directly for an increased horsepower
on IH/Farmall gas tractors!”
JDS2079
Fits: M, Supers, MTA, I, O, T, W6 series, 400, 450 gas, LP
Replaces: 364586R1, 364586R11
Price: $895.00 ea
IHS2227 LP high compression valve train kit is
needed when switching from a gas cylinder head.
Customer must grind valves to match seats & size
the guides to the valves.
Price: $295.00 ea

New parts update - Steiner Tractor Parts

Transcription

Similar documents