silensys® inverter

COMMERCIAL
REFRIGERATION
SILENSYS
INVERTER
INVERTER
®
Sans titre-1.indd 1
18/12/2013 12:53:01
Precision, Energy Saving, Multi-use
L’unique constructeur à maîtriser 3 technologies de compresseurs
SILENSYS INVERTER
silensys: A reputation built over YEARS
Tecumseh offers the widest range of condensing units on the market, from traditional to housed and quiet units to meet
all your requirements (small retail outlets, sit down and take-out restaurants, company and mass catering). Tecumseh
has developed its expertise by designing high performance solutions over many decades, producing quiet and high
quality condensing units. Our SILENSYS range meets the industry’s high standards in terms of acoustic performance,
reliability and plug and play. Tecumseh is now pleased to offer SILENSYS with a variable capacity solution.
Key features of the product
SILENSYS Inverter presents the following key features:
• A proven standard Tecumseh reciprocating compressor
• A proven controller with a good notoriety.
• SILENSYS know-how and reliability, state of art product in terms of
quality and acoustic.
• Ability to operate in high ambient temperature up to 46°C.
• Easy-to-use: all parameters are pre-set at -10°C evap. and ready to plug.
Inverter
drive
Switch button
with 3 modes:
- Off
- Inverter
- Maintenance
Logo
Markets served by SILENSYS INVERTER
• Frequency variation from 30-60 Hz can supply several cold rooms.
• SILENSYS Inverter serves specific applications that require either a
fine variation of refrigeration production or a large thermal load variations.
• SILENSYS INVERTER brings a major improvement to the fine-tuning of
regulation. ON/OFF is replaced by the variable speed control.
SILENSYS INVERTER energy efficiency and
environmental impact
• The stability of the evaporation pressure allows energy savings up to
25% with less icing (defrost cycle) of the evaporator and through better
stability of the evaporation pressure.
• The equipment is selected with the maximum heat load, which is real
only a few days per year.
• To evaluate energy performance, Tecumseh takes into account the
variations of thermal loads throughout the year.
• The stability of the evaporation pressure maintains the COP of the
compressor and explains the energy saving of the installation.
Controller that
facilitates the use
of the SILENSYS
Inverter
Tecumseh
standard
compressors
A full range
R404A 9 models
R134a 6 models
at -10°C evaporating temp.
SILSHV4610ZYZ
SILAGV4543Y TZ
SILAGV4568ZTZ
SILAGV4534Y TZ
SILAGV4553Z TZ
SILFHV4525Y TZ
SILAGV4546ZTZ
SILAFH4518Y TZ
SILFHV4540Z TZ
SILAJV4511Y TZ
SILFHV4531Z TZ
SILAJV4492Y TZ
SILFHV4524Z TZ
0
SILAJV4517Z TZ
4000
6000
8000
10000
12000
Cooling performance (Watts) EN13215 at 32°C ambient, superheat 10K, sub-cooling 3K.
SILAJV9513Z TZ
0
5000
10000
15000
20000
25000
Cooling performance (Watts) EN13215 at 32°C ambient, superheat 10K, sub-cooling 3K.
2
2000
at -10°C evaporating temp.
S I LE N S Y S I N V E RTE R
SILENSYS Inverter key BENEFITs
Energy saving
Low operating cost
68%
SILENSYS Inverter will meet the system cooling demand. Consequently,
average energy consumption during the operation time will be reduced up to 25%.
Accurate regulated temperature
REACH OF DESIRED
TEMPERATURE REDUCED
BY 1/3 WITH SYSTEM
VERY CLOSE
TO DESIRED
TEMPERATURE
LARGE TEMPERATURE
DIFFERENCE
High energy consumption
TEMPERATURE
Energy saving
DESIRED
TEMPERATURE
TIME
FIX SPEED
SYSTEM
INVERTER
SYSTEM
SILENSYS Inverter is the best
solution to fine-tune the needed
temperature and hydrometry in your
cold room. The better system control
will avoid any ambient fluctuations to
improve fresh food or goods lifetime
and quality.
START (The unit is turn on)
Multiple cold rooms
Just one SILENSYS Inverter will
allow you to manage many cold
rooms. refer to page 5:
SELECTION TOOLS
3
Plug and Play
• Connect the pressure sensor on the compressor valve
• Turn ON (Auto position, factory pre-set at -10 ° C for refrigerants R404A and R134a
• Follow the installation guide to fine tune the factory setting (Set point, inside the authorized range)
Key benefits
Increased safety
• The speed variation is limited from 30 to 60 hertz in order to secure the
compressor, motor and electrical components
• 2 modes: Inverter with capacity variation or ON/OFF regulation
• Ability to operate in high ambient temperature through the condenser (HTA)*
• Low noise and vibration
• Oil return (Optional)
Easy maintenance and customer service
• Assembly time
• Reduction of components
• A Tecumseh Europe dedicated technical support
• Technicians are trained and in contact with Inverter experts
Installation speed
•
•
•
•
Ergonomics in the installation
Assembly time
Reduction of components
A plug and play solution to save installation time and maintenance
* HTA : High Temperature Ambient
DIFFERENTS BENEFITS FOR DIFFERENTS STAKEHOLDERS
4
For the end customer
For the installer
SILENSYS Inverter offers the following benefits to
the final customer:
• A lower cost in the case of multiple cold room
• A lower installation cost due to the reduced number
of components
• An operating cost with a possible savings of up to 25%
• A quiet condensing unit for facilities in urban areas
SILENSYS INVERTER offers the following benefits to
the installer:
• A condensing unit type "Plug & Play" with a limited
number of connections and wiring.
• A condensing unit that offers the reliability of a
standard Tecumseh compressor
• A standard compressor available in wholesale
networks
• A decreased number of condensing units installed
reduces maintenance. To get the expected gains, do
not oversize the unit.
S I LE N S Y S I N V E RTE R
QUICK SELECTION GUIDE:
2 evaporators
3 evaporators
1st configuration:
Having slightly different
cooling capacities, (up to 30%)
Each one will have
the same cooling capacity
Example: at 20% Delta 0,84kW and 0,67kW > 1,51kW needed*
Example: 2,4kW + 2,4kW + 2,4kW > 7,2kW needed*
Use the correcting factor** of 0,9 > 1,36kW to select the SILENSYS INVERTER
Use the correcting factor** of 0,85 > 6,12kW to select the SILENSYS INVERTER
Cooling capacity
Comments
60Hz > 1,36kW
SILENSYS INVERTER matches the
capacity requirement with longer runtime
expected
34Hz > 0,84kW
SILENSYS INVERTER matches the
capacity requirement
9% Delta between lowest cooling demand
30Hz > 0,74kW and SILENSYS INVERTER smallest capacity:
The condensing unit will run less
Model
SIL AGV 4546Z
SIL AJV 4492Y
Model
Cooling capacity
Comments
60Hz > 6,12kW
SILENSYS INVERTER matches the
capacity requirement with longer runtime
expected
43Hz > 4,8kW
SILENSYS INVERTER matches the
capacity requirement
30Hz > 3,48kW
31% Delta between lowest cooling demand
and SILENSYS INVERTER smalest capacity.
A pressure control valve is needed to keep
constant evaporating pressure
• When the smallest evaporator runs alone, the evaporating temperature will be stabilized around -13°C (-3K)
• When a SILENSYS INVERTER feeds 3 evaporators or 2 evaporators having 30% of capacity difference, the suction pressure captured by the pressure sensor will be
stabilized around -18°C (-8K). To keep the evaporating pressure constant and the humidity level (flower, fresh meat conservation) inside the cold room, it will be helpful
to install an evaporating pressure control valve.
• Because of suction pressure drop, adjust the P1-04 and P1-06 parameter under the estimate suction pressure to avoid cut out during winter time.
4 evaporators and more
2 evaporators
2nd configuration:
With the same cooling capacity
Example: 2 x 4,6kW = 9,2kW, needed*
SIL AGV 4568Z
Model
Cooling capacity
Comments
60 Hz > 9,16kW
SILENSYS INVERTER matches the
capacity requirement
30Hz > 5,3kW
13% Delta between lowest cooling demand and
SILENSYS INVERTER smallest capacity: The
condensing unit will run less
Example: 3kW + 3kW x 2kW > 8kW, or 6 x 1,5kW > 9kW needed*
Use the correcting factor** of 0,8 > 7,2kW, select the SILENSYS INVERTER:
SILAGV 4553Z TZ
...
• Caution: Regulation and use will ensure that the minimum duty will be equal
or higher than 70% of the SILENSYS INVERTER cooling capacity at 30Hz.
• Because of suction pressure drop, adjust the P1-04 and P1-06 parameter
under the estimate suction pressure to avoid cut out during winter time.
w*: Operating conditions: Tevap:-10°C, 32°C ambient temperature, 16h working per day, Super heat 10K subcooling 3K EN13215
**: Number of room Correcting factors
Rules Inverter program necessary setting : P1-04 and P1-06
1
None
2
0,9 (dépend of the capacity balance) the minimum duty will be equal or higher than 80% of the SILENSYS INVERTER cooling capacity at 30Hz. Yearly lowest suction pressure estimation
3
0,85
the minimum duty will be equal or higher than 70% of the SILENSYS INVERTER cooling capacity at 30Hz. Yearly lowest suction pressure estimation
4
0,8
the minimum duty will be equal or higher than 70% of the SILENSYS INVERTER cooling capacity at 30Hz. Yearly lowest suction pressure estimation
Correcting factors are made to compensate for the worst condition of calculation.
5
SILENSYS Inverter technical data
R-404A
Commercial POSITIVE refrigeration
Cooling capacity (W), EN 13215, Ambient temperature 32°C, superheating 10K, subcooling 3K, R404A*
Ambient
Frequency
temp.
Model
Cooling capacity (W)
BOM
°C
32
SIL AJV 9513 Z S991330242
43
32
SIL AJV 4517 Z S993030242
43
32
SIL FHV 4524 Z S993530242
43
32
SIL FHV 4531 Z S993730242
43
32
SIL FHV 4540 Z S993830242
43
32
SIL AGV 4546 Z S995130242
43
32
SIL AGV 4553 Z S995230242
43
32
SIL AGV 4568 Z S995430242
43
32
SIL SHV 4610 Z S999000242
43
Hz
Pre setting of
the inverter
(P1-03)
Suction
Evaporating temperature (°C)
pressure
-15
0
10
reference
Absorbed power (W)
Evaporating temperature (°C)
-20
-15
-10
-5
0
5
10
30
60
30
60
30
60
30
60
30
60
30
60
30
60
30
60
30
60
30
60
703
1280
488
889
831
1507
618
1122
1122
2036
766
1396
1506
2706
1079
1944
1828
3240
1417
2518
922
1660
671
1208
1072
1924
829
1484
1495
2680
1084
1943
1957
3465
1474
2606
2356
4095
1890
3282
1173
2090
880
1563
1346
2387
1066
1883
1925
3400
1450
2553
2466
4295
1916
3323
2941
5005
2415
4098
1460
2572
1116
1956
1655
2904
1331
2325
2411
4203
1863
3231
3036
5212
2410
4110
3587
5992
2992
4987
1784
3108
1382
2391
2002
3482
1627
2818
2953
5095
2325
3986
3672
6234
2957
4985
4293
7082
3625
5976
2147
3705
1679
2872
2388
4132
1958
3371
3554
6087
2837
4827
4378
7383
3566
5971
5066
8308
4317
7099
2553
4369
2012
3408
2820
4864
2328
3999
4216
7192
3403
5771
5163
8687
4245
7099
5913
9708
5079
8398
30
2011
2694
3485
4381
5381
6486
7700
1802
2312
2548
60
30
60
30
60
30
60
30
60
30
60
30
60
30
60
3634
1352
2458
2402
4336
1672
3035
3346
5972
2422
4336
6636
12038
4889
9496
4801
1918
3428
3190
5678
2340
4177
4239
7456
3220
5659
8334
14666
6383
11929
6110
2580
4527
4100
7181
3115
5462
5302
9164
4161
7173
10257
17251
8059
14259
7554
3336
5748
5131
8844
3995
6887
6522
11081
5235
8869
12415
19800
9925
16486
9130
4186
7089
6285
10668
4982
8454
7892
13198
6435
10737
14814
22326
11992
18618
10839
5132
8551
7562
12660
6079
10173
9403
15509
7752
12775
17464
24855
14272
/
12690
6181
10149
8970
14836
7293
12061
11051
18021
9188
14994
20373
/
16782
/
3638
1763
3556
2016
4105
1994
4062
2494
5140
2544
5257
4480
8175
4177
7678
5290
2344
5382
2571
5925
2633
6093
3187
7437
3317
7776
5018
10593
5636
11581
6444
2627
6653
2844
7245
2961
7554
3591
9267
3774
9753
5534
/
6362
/
566
1163
579
1193
748
1487
783
1566
1099
2107
1103
2119
1276
2639
1279
2649
1704
3577
1731
3636
686
1580
736
1712
883
1975
941
2123
1348
2928
1399
3064
1581
3684
1635
3828
2103
4961
2141
5057
727
1849
802
2049
939
2319
1013
2514
1437
3447
1520
3666
1727
4446
1815
4678
2296
5980
2341
6100
-10°C
3,4 bar
*: Cooling capacity is given for information purpose and may change, without prior notice, with improvement that Tecumseh Product Company is permanently
making to its products.
Customer service
• A Tecumseh Europe dedicated technical support
• Technicians are trained and in contact with Inverter experts
6
S I LE N S Y S I N V E RTE R
R-134a
Commercial POSITIVE refrigeration
Cooling capacity (W), EN 13215, Ambient temperature 32°C, superheating 10K, subcooling 3K, 3 PHASES, R134a*
Ambient
Frequency
temp.
Model
Cooling capacity (W)
BOM
°C
Hz
30
60
30
60
30
60
30
60
30
60
30
60
30
60
30
60
30
60
30
60
30
60
30
60
32
SIL AJV 4492 Y
S990930242
43
32
SIL AJV 4511 Y
S991030242
43
32
SIL FHV 4518 Y
S993430242
43
32
SIL FHV 4525 Y
S993630242
43
32
SIL AGV 4534 Y
S994830242
43
32
SIL AGV 4543 Y
S995030242
43
Pre setting of
the inverter
(P1-03)
Suction
Evaporating temperature (°C)
pressure
-15
0
10
reference
Absorbed power (W)
Evaporating temperature (°C)
-20
-15
-10
-5
0
5
10
384
714
275
512
538
991
422
778
772
1425
351
656
1085
1982
722
1328
1188
2203
851
1584
1673
3082
1132
2094
549
1015
426
787
727
1331
591
1081
1045
1913
622
1148
1446
2617
1051
1911
1693
3116
1248
2306
2318
4233
1685
3087
738
1359
597
1096
947
1719
785
1423
1377
2495
940
1712
1863
3335
1430
2566
2311
4213
1748
3196
3075
5559
2334
4226
956
1747
790
1440
1199
2155
1006
1806
1771
3179
1308
2356
2341
4143
1864
3299
3049
5509
2361
4268
3951
7071
3088
5522
1204
2182
1008
1820
1484
2642
1255
2229
2233
3974
1732
3088
2885
5050
2357
4120
3916
7018
3094
5536
4956
8783
3956
6989
1486
2666
1254
2239
1804
3181
1534
2695
2769
4889
2218
3918
3502
6066
2917
5040
4921
8756
3958
7020
6101
10712
4949
8645
1804
3204
1531
2700
2163
3774
1846
3206
3384
5938
2771
4859
4198
7204
3553
--6076
10744
4965
8739
7398
12879
6082
10512
348
684
352
695
471
950
488
988
724
1435
730
1448
785
1566
774
1543
1259
2451
1223
2375
1530
3039
1507
2993
417
926
446
684
587
1343
628
1449
785
1736
795
1764
910
2043
921
2075
1551
3428
1582
3518
1958
4429
2013
4578
449
1102
494
1221
659
1670
716
1820
821
2000
835
2037
976
2418
1002
--1703
4168
1779
4368
2202
5516
2307
5795
-10°C
1 bar
*: Cooling capacity is given for information purpose and may change, without prior notice, with improvement that Tecumseh Product Company is permanently
making to its products
Acoustics, Dimensions, Connections
A higher performance with a low noise level
Models
R134a
Weight
SIL AJV 4511 Y TZ
Acoustic pressure
I max
Net
Gross
10m**
A
Kg
Kg
dB(A)
5,1
73
93
7,2
74
94
SIL AFH 4518 Y TZ
8,3
82
106
SIL FHV 4525 Y TZ
12,3
86
108
SIL AGV 4534 Y TZ
22,2
133
108
SIL AGV 4543 Y TZ
22,2
133
148
SIL AJV 9513 Z TZ
8,3
76
96
SIL AJV 4517 Z TZ
8,3
75
97
SIL FHV 4524 Z TZ
12,3
86
111
SIL FHV 4531 Z TZ
22,2
92
114
SIL FHV 4540 Z TZ
22,2
92
114
SIL AGV 4546 ZTZ
22,2
133
148
SIL AGV 4553 Z TZ
27
139
154
SIL AGV 4568 Z TZ
27
143
158
SIL SHV 4610 Z YZ
27
270
289
**: Acoustic pressure at 50Hz with maximum fan speed
SIL AJV 4492 Y TZ
R404A
Imax
C.U.(60 Hz)
30
30
34
36
39
39
31
36
37
41
39
37
37
37
48
Receiver
Volume
L
1,5
1,5
2,35
2,35
6
6
1,5
2,35
2,35
3,9
3,9
6
6
6
9,5
Diameter of
connection
Suction Liquid
Ø“
Ø“
1/2
5/8
5/8
5/8
7/8
7/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
1 1/8
1 1/8
3/8
3/8
1/2
1/2
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
5/8
5/8
Fan absorbed
power
Fan
Nbr
1
1
1
1
2
2
1
1
1
1
1
2
2
2
2
Diam.
Per fan
mm
W
360
360
450
450
450
450
360
450
450
450
450
450
450
450
500
65
65
126
126
126
126
65
126
126
126
126
126
126
126
180
Fan
voltage
V
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
7
Electrical drawings
1 L1
3 L2
5 L3
N
4T2
6T3
8T4
AC
D1
A
A1
14
D3
BN6
2
A2
BN5
1
Analog inputs
Ce plan est propriété exclusive de notre société, tous droits de reproduction et de diffusion réservés / This drawing is the property of our society, copyrights and publications reserved.
X1
2T1
PE
DE8521 SIL FH ... Y/Z TZ (INVERTER)
+V
S6
1 P8
X3
LP
5 L3
3 L2
1 L1
5 L3
3 L2
1 L1
2
S4
D
B
C
3
S3
4
S2
Digital inputs
S1
SC
EC58848
d
Inversion bornier X3 -5-6-7 et contacteur KM3
19/05/14
c
Modif position disjoncteur commande + MAJ
28/02/14
1.0
2.6
0.6
1.2
0.7
A2
(bar)
+10V
Diff:
L3
M2
1
FF
MV
FF
EX15171
(bar)
3 L2
5 L3
N
6T3
8T4
SIL FHV 4524 Z TZ
SIL FHV 4531 Z TZ
SIL FHV 4540 Z TZ
SIL FHV 4518 Y TZ
SIL FHV 4525 Y TZ
DE8521_d
SCHEMA ELECTRIQUE TFH TENSION T
SILENSYS TAILLE M VITESSE VARIABLE
TECUMSEH EUROPE S.A
38090 VAULX MILIEU
Origine
Origin
1 L1
Visa Verif.
Sign. Check
4T2
Date
Date
2T1
DE8521
d
AC
1QO
Indice
Revision
A2
Ce plan est propriété exclusive de notre société, tous droits de reproduction et de diffusion réservés / This drawing is the property of our society, copyrights and publications reserved.
MV
DE8523 SIL SHV 4610 ZYZ
Modifications
Change content
PE
A.M.
Ind.
File no. Rev.
DE8520*
1U1
X3
KM3
A1
A1
A2
2
3.4
Consigne:
Setpoint (bar)
Cut-out:
1
0-10V
R134a
For more information, please refer to electric data documentation / Pour plus d'information, voir document données électriques.
EC57260
DE8521
M1
3
G ND
R404A
1
KM3
3
Paramètres par défaut :
M3
1
R404A
(bar)
18
KM2
Default parameters :
Consigne:
Setpoint (bar)
Cut-out:
15
KM1
M2
1
22NC
A1
PTC
+ PTC
A2
W
+10V
A1
22NC
KM1
A2
M1
21NC
21NC
3
2
1
V
0-10V
1
3
U
Diff:
3
For more information, please refer to electric data documentation / Pour plus d'information, voir document données électriques.
02/04/14
EC58051
c
Mise a jour
b
Ajout pont entre borne 1 et 2 du X2
8
+V
RPM
G ND
1
P
4
2
B
11
21
17
14
2
A2
D
2
3
4S2
KM2
Modifications
Change content
06/02/14
Date
Date
MV
FF
MV
FF
Visa Verif.
Sign. Check
Origine
Origin
Digital inputs
M7
X3
TECUMSEH EUROPE S.A
38090 VAULX MILIEU
SCHEMA ELECTRIQUE SH TENSION YZ
SILENSYS TAILLE XL VITESSE VARIABLE
(bar)
3.4
2.6
1.2
DE8523_c
DE8523
SIL AGV 4546 Z TZ
SIL AGV 4553 Z TZ
SIL AGV 4568 Z TZ
SIL AGV 4534 Y TZ
SIL AGV 4543 Y TZ
SIL SHV 4610 Z YZ
SIL AJV 4517 Z TZ
* Drawing available on request
R1
RD
C
X1
13
PE
KM1
EC56901
Analog inputs
A1
KM3
20
1
A1
LP
HP
X1
S6
S5
S4
KM2
A
1P4
S2
S1
SC
KM1
X3
1U9
1U9
9
10
12
5 L3
6T3
W
2
8
3 L2
5 L3
6T3
PE'
PE
1 L1
L3'
L3
4T2
L2'
L2
X1
KM2
2T1
L1'
L1
V
3 L2
U
1 L1
4T2
X1
14
U
P
2T1
11
MB
PE
L3
INT69
PTC
EMC - Filter
KM2
X2
MA
6T3
4T2
2T1
6T3
2T1
4T2
L2
L1
1V0
4
X2
KM1
6
L2
1
5
3
2
1
S3
2
2
L1
14
PTC
13
X1
A.M.
Ind.
File no. Rev.
X3
1 P9
LP
6
1
5 L3
3 L2
1 L1
5 L3
3 L2
1 L1
2
1Q2
X2
1U9
X1
1
1F0
1F7
13
1
14
1F2
DE8524* DE8523 DE8522*
L1
SIL AJV 9513 Z TZ
SIL AJV 4492 Y TZ
SIL AJV 4511 Y TZ
Default parameters :
RPM
3
P
L2
Reference
Paramètres par défaut :
KM2
BN4
BN7
2T1
KM1
BN3
1L1
BN2
4T2
BN1
3L2
R1
KM3
6T3
A2
KM3
5L3
Drawing
Number
BN9
7
A1
6
9
21NC
22NC
KM1
BN8
5
X3
S1
PE
W
V
U
X3
10
U
P
11
24
RD
21
PE'
X3
KM2
KM1
PE
L3'
L3
L2'
L2
1U1
L1
L1'
EMC - Filter
14
2V2
13
L1
12
1
6T3
5 L3
6T3
MA
4T2
3 L2
4T2
X2
MB
2T1
1 L1
2T1
4
PE
6T3
3
L3
4T2
2
1
X3
1U1
L2
2T1
MC
2
8
S5
HP
X3
1
D2
13
LP
D4
Indice
Revision
c
S I LE N S Y S I N V E RTE R
Dimensions &Packaging
C
Sizes
A
S
930 mm
M
L
XL
A
B
1145 mm 575 mm
1615 mm
C
690 mm
1315 mm
1300 mm
B
R-134a
R-404A
Spare parts reference and sizes
Product Model Number
Reference
INVERTER spare part code
Size
SIL AJV 9513 Z TZ
SIL AJV 4517 Z TZ
SIL FHV 4524 Z TZ
SIL FHV 4531 Z TZ
SIL FHV 4540 Z TZ
SIL AGV 4546 Z TZ
SIL AGV 4553 Z TZ
SIL AGV 4568 Z TZ
SIL SHV 4610 Z YZ
SIL AJV 4492 Y TZ
SIL AJV 4511 Y TZ
SIL FHV 4518 Y TZ
SIL FHV 4525 Y TZ
SIL AGV 4534 Y TZ
SIL AGV 4543 Y TZ
Controller for all models
S991330242
S993030242
S993530242
S993730242
S993830242
S995130242
S995230242
8580105
8580105
8580106
8580120
8580120
8580102
8580118
8580104
8580109
8580112
8580114
8580116
8580107
8580103
8580103
8586050
S
M
M
M
M
L
S995430242
S999000242
S990930242
S991030242
S993430242
S993630242
S994830242
S995030242
-
L
L
XL
S
S
M
M
L
L
-
Packaging
• High quality
• Similar Packaging of SILENSYS
• Dedicated Palets
• Forklift Standard indication
• Easy to unpack
• Tiltwatch®* on S and M size
Icon
Tiltwatch®
Forklift
indications
*Tiltwatch : Turns red if the package it is affixed to is tilted past 80° or is completely up-ended.
However, it remains unaffected by movement due to normal handling conditions.
9
Notes
10
S I LE N S Y S I N V E RTE R
Notes
11
SALES AND MARKETING
HEAD OFFICE
Tecumseh Europe :
GERMAN OFFICE
Tecumseh Europe, a major player in the refrigeration and climatic comfort industry, is a
subsidiary of the American group Tecumseh Products Company. As a human-sized international
company, Tecumseh Europe designs and manufactures compressors and condensing units
using new technologies, which positions it as the leader in commercial refrigeration.
Today, about 25% of global food consumption is spoiled due to non-compliance with the cold
chain. Facing this reality, Tecumseh aims to offer a range of high added-value products and
services.
ITALIAN OFFICE
Values in the service of customers and the company
For 80 years, Tecumseh’s success has been based on key values shared by its managers and all
its employees:
• the human value: the people that make up the company
• the actual customer orientation and the place given to its customers
• the importance of the quality of services and products offered
• the permanent technological innovation.
Via Parco Abbaziale, 6
10 094 Giaveno (TO)
Italia
Tel. int +39 (0)11 937 98 61
Fax int +39 (0)11 937 83 88
SPANISH OFFICE
C/Corcega 301-303, 2°, 3a
08 008 Barcelona
España
Tel. int +34 93 218 5708
Fax int +34 93 218 1691
BRITISH OFFICE
One Victoria Square
B1 1BD Birmingham
United Kingdom
Tel. int + 44 (0) 121 632 2900
Fax int +33 (0)4 74 82 24 94
MALAYSIAN OFFICE
N° 18 Jalan Sultan Mohamed 4
Selat Klang Utara
42 000 Port Klang
Selangor Darul Eshan
Malaysia
Tel. int +60 3 3176 3886
Fax int +60 3 3176 3890
sales&[email protected]
- Photos © Tecumseh - © Thinkstock - © Héloïse Peyre, Jean-Philippe Darbois.
Ludwigstrasse 31
60 327 Frankfurt am Main
Germany
Tel. int +49 (0)69 97 1454-0
Fax int +49 (0)69 72 41053
the commercial refrigeration specialist
The people: most important resource of the company
This value can be seen especially in the professionalism of each employee, all of whom have
significant technical and commercial skills as well as a real industrial dimension.
The development of skills by in-house training and promotion aims to involve employees to a
greater degree.
Innovative products
Since 1934, Tecumseh has been committed to developing products using innovating
technologies that guarantee low energy consumption as well as a high level of reliability.
Today, Tecumseh is the only company that offers its customers the 3 technologies used in a
hermetic compressor: Reciprocating, Rotary and Scroll.
Internationally recognised, the benchmark brands of the Group such as L’Unité Hermétique®,
Silensys®, Wintsys®, Masterflux®, Celseon®, and Vector® form part of the pillars of the
refrigeration industry thanks to a strong distribution network with thousands of points of sale
on all 5 continents.
Tecumseh also offers service
Tecumseh offers a complete assistance service from the selection of products, design,
and training, to on-site technical assistance by a high-performance Sales Administration
department.
Tecumseh: the desire to propose a green offer
Being aware of the future economic and ecological demands, the company is committed to
sustainable development by offering products that use the refrigeration fluids in phase with the
current market. Because it follows a rigorous approach of continuous improvement, Tecumseh
works according to the ISO 14001 certification (environmental management system) as well as
standard ISO 9001 for its quality management system.
With more than 1,350 employees, Tecumseh Europe focuses on innovation, quality of the
products with complete solutions. At present and for the foreseeable future, the company is the
best supplier of 100% customer-oriented commercial refrigeration.
Silensys Inverter
catalog EN 11/2014
2, avenue Blaise Pascal
Bât. B
38 090 Vaulx-Milieu
France
Tel. int +33 (0)4 74 82 24 00
Fax int +33 (0)4 74 82 24 44
«L’Unité Hermétique», a Tecumseh brand internationally recognised by
professionals in the cooling industry, stands for reliability, expertise and skill.
Tecumseh offers solutions labeled «Expertise L’Unité Hermétique», referencing
the performance of the historical benchmark of the refrigeration market on all
5 continents.
www.tecumseh.com