Moulding Selection Guide

$5
Inspired People • Innovative Solutions • Beautiful Homes
2011-2012
Moulding Selection Guide
www.mouldingandmillwork.com
AL
I TE
MOULDING & MILLWORK INC. AND OUR AFFILIATED BUSINESSES ARE
COMMITTED TO SUSTAINABLE BUSINESS PRACTICES.
We are proudly promoting the use of certified, low
emitting, and recycled wood products, including
SU
O
AT
U LT
Green Initiatives
R
PERC
Ultralite
Supercoat MDF Mouldings
• WEIGHT SIMILAR TO PINE
Ultralite Supercoat mouldings have a similar density and weight
to Ponderosa Pine.
• NO GRAIN-RAISE, FINGERJOINTS OR KNOTS
our new SPERO™ moulding line.
Will not show defects that often are visible with paint-grade Pine - such as open joints
(fingerjoints and edgeglued), and grain-raise.
In addition, we are setting up Sustainable Operating
• BETTER WORKABILITY THAN OTHER MDF MOULDINGS
Standards, which includes responsible manufacturing
processes, chain of custody certifications, recycling
programs, energy reduction programs, low carbon
emission vehicle fleets, and memberships to
regional and national “Green” councils.
Moulding & Millwork, through our manufacturing
facilities and affiliates, have the ability to provide
Ultralite mouldings cut, cope, miter, and staple better than most other MDF mouldings,
and will not “volcano” when nailing.
• SUPERB PRIME COATING
Finished with a unique two-coat process that gives a superior primed top coat.
• EXCELLENT DIMENSIONAL STABILITY
Will not twist or split like natural wood.
• COMPETITIVE PRICING
Stable price below primed fingerjoint mouldings.
Create Your Own Custom Look
products that may contribute to LEED rating
The moulding at the top of the ceiling is:
MOULDING & MILLWORK #412M Baseboard
points in the following areas:
The angled moulding is:
MOULDING & MILLWORK #48LM Crown
• Materials & Resources, 4.1, 4.2, 5.1, 5.2, 7
The moulding mounted on the wall is:
MOULDING & MILLWORK #412M Baseboard
• Indoor Environmental Quality, 4.4
The door casing at
the top of the door is:
MOULDING & MILLWORK #24112-CAM
The door casing is:
MOULDING & MILLWORK #908M
The angled moulding is:
MOULDING & MILLWORK #48LM Crown
Contains no urea-formaldehyde
The moulding mounted on the wall is:
MOULDING & MILLWORK #8263M Baseboard
www.mouldingandmillwork.com/spero
3
making interiors spectacular
Table of Contents
2
3
4
6
17
19
20
28
29
39
39
40
41
42
45
46
47
47
48
48
49
50
51
52
53
54
55
59
Green Initiative
Ultralite Supercoat
Contents / Glossary of Terms
Casings
Architraves
Backbands
Baseboards
Base Caps
Crowns
Dentils & Rope
Crown Enhancers
Coves
Chair Rails
Panel Moulds
Door Stops
Hand & Wall Rails
Wainscot
Glass Beads
Corners, Squares & Mullions
Flooring Accessories
Brickmoulds & Lattice
Quarter, Half & Full Rounds
Miscellaneous Profiles
Accessories
Interior Jambs
Finish Lumber (S4S)
Product Index
M&M Manufacturing
3
8
1
5
6
4
PROFILE #
DESCRIPTION
M&M#
366MAP
366M
366
366P
Colonial Casing
1/2” x 2-1/4”- 7´& RL
9/16” x 2-1/4” - 16´
11/16” x 2-1/4” - RL
1/2” x 2-1/4”- 7´- 14´
Maple
Ultralite
Solid Pine
Solid Pine
9
10
PROFILE SIZES
& LENGTHS
2
PROFILE SPECIES
1
ARCHITRAVES: In classical architecture, it described the main beam resting on the tops of the columns. Today it is often used as a decorative moulding
for ornamentation or finishing at the top of windows and doors.
2
BASEBOARDS: Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room
together. Baseboards are usually thinner than the casing.
3
BUILD-UPS: Combining two or more moulding profiles to create a new or custom look. Also called stacking, build-ups make it easy to create the look of
custom made trimwork without the high cost.
4
CASING: Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between
drywall and the door or window frame. Casings are generally thicker than the base mouldings.
5
CROWNS: Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to
ceiling while adding a distinctive look and charm to your room.
6
FINISH BOARDS: Finish Boards come in either S4S (Surfaced 4 Sides) or S3S (Surfaced 3 Sides) and are used for a multitude of purposes including
shelving, window liner, bases, casing, etc.
7
PANEL MOULDS: Panel Moulds are used to frame wall paneling and add an accent to your walls.
Often used in furniture construction.
8
RAKE MOULD: Rakes are often used as crowns. In fact, they are sometimes called “solid crowns”.
9
WAINSCOT: Trimwork installed in the area below a chair rail. Numerous options are available including raised panel, shadow box and beaded. Combined
with a chair rail and baseboard, Wainscoting creates a dramatic look to any room.
10
WINDOW STOOL: Also called window sill, a Window Stool is the surface installed below the sash of a window. Trim installed under window stool creates a
distinctive look and adds a decorative touch.
7
GLOSSARY OF TERMS
BASE SHOES: Base shoes are primarily used to trim flooring materials and are often used in combination with a traditional baseboard to conceal variations between the flooring and the
base. However, this versatile profile works great to solve numerous trimming needs.
BATTENS/OPEN TRIM: A Batten/Open Trim is a narrow strip of wood used to cover joints or as decorative vertical members over plywood or wide boards.
BEADED CEILING: A popular profile used often as wainscot paneling. Combined with a chair rail or cap mould and a baseboard, beaded ceiling makes a distinctive wainscot package.
BRICKMOULDS: A Brickmould is mainly used as exterior casing around doors. 2 inches is the most common size, however, 1-1/2 and 1-1/4 inch sizes are available. Brickmoulds can
also be used in place of a crown, and as a transition under window sills.
BULLNOSE: A term used to describe the eased edges of trim and stops. A single bullnose stop would have one eased edge and a square edge back. A double bullnose stop would have
two eased edges.
CHAIR RAILS: Chair Rails are practical as well as decorative. Applied to a wall, from 24 to 48 inches up from the floor, they protect the wall from scuffs and dents from the backs of
chairs as well as adding a beautiful accent to any room.
CORNERS: Corners are used to protect the outside edges of the wall from damage and abrasion. Corners come in a wide variety of sizes and detailing.
COVES: Coves are commonly used to soften the transition on inside corners but may be used for a wide range of applications.
DENTIL: A moulding pattern with a series of closely spaced rectangular blocks and spaces. Used especially in classic architecture.
DOOR STOPS: The Door Stop mouldings are attached to the door jamb on both sides and at the top. It is where the door comes to a rest when it is closed stopping the door from
moving any further, and covering the gap that would otherwise appear between the door and the jambs.
FULL ROUNDS: Full Rounds are used for numerous purposes and projects. Some of the more common uses are closet poles, curtain rods and towel rods.
HALF ROUNDS: A cross section of a Half Round looks like a half circle and is used primarily as decorative trim. It works well as a trim piece for wall paper or to add a decorative pattern
to flat panels. This profile can also be used to put a rounded edge on various shelving.
HANDRAILS: Handrails provide safety and support.
QUARTER ROUNDS: Quarter Rounds come in several sizes and serve a variety of functions. They are most often used with baseboards.
RETURN: Term used to indicate the method of carrying a mouldings detail from the front of the moulding back to the wall. Generally a 45 degree cut is made to the front of the long
moulding and an opposite 45 is cut on a small piece to carry the detail to the wall.
SCREEN MOULD: A very versatile profile; Screen Mould fits a wide variety of needs and uses. Traditionally used to hold mesh screening into wood screens, it also works well as edge
trim on various shelving or wood trim for wall paper etc.
Moulding Selection Guide
Casings
Moulding Selection Guide
Casings
Casings define the overall character of a room
and are often the most visible part of the trim.
They are used primarily to cover the gap between
drywall and the door or window frame. Casings
are generally thicker than the base mouldings.
ALL SIZES NOMINAL
ALL SIZES NOMINAL
M&M#
Casing
368MAP 1/2˝ x 2-1/4˝ - RL & 7´ Maple
M&M#
Colonial Casing
444N
444NP
11/16”x 3-1/4”- RL Solid Pine
11/16” x 3-1/4”- 15´ FJ Pine Primed
M&M#
Colonial Casing
355
9/16” x 2-3/4” - 7´6˝ & RL Solid Pine
M&M#
Colonial Casing
356LCE
7/16” x 2-1/4”- 7’ & 14’ P/E Chesapeake
356SO
356XO
7/16” x 2-1/4”- 7’ & RL Oak
9/16” x 2-1/4” - 7’ & RL Oak
358O
358O
9/16” x 2-11/16” - RL Oak
9/16” x 2-11/16” - 7´6˝ Oak
351O
351
456CE
9/16” x 2-1/2” - RL
11/16” x 2-1/2” - RL
5/8”x 2-1/4”- 7’&14’
M&M#
Colonial Casing
356
356P
356J
356M
11/16” x 2-1/4” - 7’,14´ & RL
11/16” x 2-1/4” - 7’ & 14’
11/16” x 2-1/4” - 7’ & 14’
5/8” x 2-1/4”-7 ’& 14’
9000PRI
9000POP
5/8” x 2-1/4”- 7’ & 14’ FJ Pop Primed
5/8” x 2-1/4” - RL+7´
Poplar
6
M&M#
Colonial Casing
9037PRI
5/8˝ x 3-1/4˝-7´6˝ & 15´ FJ Pop Primed
M&M#
Colonial Casing
366M
366
366P
5/8” x 2-1/4” - 14´ & 85˝ Ultralite
11/16” x 2-1/4” - RL + 7´ Solid Pine
11/16” x 2-1/4”- 7´ & 14´ FJ Pine Primed
M&M#
9923PRI
Casing
9/16˝ x 2-1/4˝ - 7´ & 14´ FJ Pop Primed
M&M#
Casing
360LP
5/8” x 3-1/4” - 16´
FJ Pine Primed
Oak
Solid Pine
P/E Chesapeake
Solid Pine
FJ Pine Primed
FJ Pine Jesso
Ultralite
M&M#
Colonial Casing
1002PRI
3/4” x 3” - 14’6”
FJ Pop Primed
M&M#
Colonial Casing
444O
5/8” x 3-1/4”- 7’6” & RL Oak
444LM
444LJ
444L
444
5/8” x 3-1/4”-7’6” & 16´
11/16” x 3-1/4” -7’6” & 16´
11/16” x 3-1/4” - 7’6” & RL
11/16” x 3-1/2” - RL
Ultralite
FJ Pine Jesso
Solid Pine
Solid Pine
M&M#
439O
M&M#
Colonial Casing
9931PRI
5/8” x 3-1/2”- 7´6˝
FJ Pop Primed
M&M#
Colonial Casing
448P
11/16” x 3-1/4”- 16´ FJ Pine Primed
Colonial Casing
M&M#
Colonial Casing
5/8” x 3-7/16”- 7’6” & RL Oak
449O
3/4” x 3-1/2”- 7’6” & RL
Oak
7
Moulding Selection Guide
Casings
Casings define the overall character of a room
and are often the most visible part of the trim.
They are used primarily to cover the gap between
drywall and the door or window frame. Casings
are generally thicker than the base mouldings.
ALL SIZES NOMINAL
M&M#
Casing
2496J
11/16”x 3”- 7’6” & 16’
2496O
2496PRI
9041PRI
M&M#
Casing
4596POP
3/4” x 3-1/4” - RL
Moulding Selection Guide
Casings
Poplar
ALL SIZES NOMINAL
M&M#
9024PRI
Casing
3/4” x 2-1/2” - 15´
FJ Pine Jesso
3/4” x 3” - 7’6” & RL Oak
3/4” x 3” - 14’6”
FJ Pop Primed
1-1/16˝ x 4-1/4˝ - 16´ FJ Pop Primed
M&M#
Casing
9832MAP
3/4”x 3-1/2”- RL & 7’6”
FJ Pop Primed
M&M#
Casing
9033PRI
3/4”x 3-1/2”- 16’
M&M#
Casing
9831PRI
11/16”x 3-1/4”- 16’
M&M#
Casing
9022PRI
3/4” x 2-3/4” - 15´ +7´6˝ FJ Pop Primed
FJ Pop Primed
FJ Pop Primed
Maple
M&M#
Casing
18M112ULCAM 3/4” x 3-1/2” - 16´
M&M#
Casing
24112-P-CAM 3/4” x 3-1/2” - 16’
24112-P-CAJ 11/16” x 3-1/2” - 7’6” & 16´
24112-P-CAO 3/4”x 3-1/2”- 7’6” & RL
9034PRI
9035PRI
9035POP
8
Ultralite
Ultralite
FJ Pine Jesso
Oak
13/16” x 3-1/2” - 16’ FJ Pop Primed
11/16”x 3-1/2”- 7’6” & 16’ FJ Pop Primed
11/16”x 3-1/2”- RL & 7’6” Poplar
M&M#
Casing
5/8” x 3-1/2” - 16’
M&M#
Casing
24112CCLJ
215M
215PRI
3/4” x 3-1/2” - 16’
Ultralite
11/16” x 3-1/2” - 16’ FJ Pop Primed
24112-C-CAO 3/4”x 3-1/2”- 7´6” & RL
24112-C-CAM 3/4” x 3-1/2” - 16’
M&M#
Casing
535M
3/4” x 3-1/2” - 16’
Ultralite
M&M#
Casing
97M
1” x 3-1/2” - 16´
Ultralite
9031PRI
9031POP
FJ Pine Jesso
Oak
Ultralite
11/16” x 3-1/2” - 16’ +7´6˝ FJ Pop Primed
11/16” x 3-1/2” - RL +7´6˝ Poplar
9
Moulding Selection Guide
Casings
Casings define the overall character of a room
and are often the most visible part of the trim.
They are used primarily to cover the gap between
drywall and the door or window frame. Casings
are generally thicker than the base mouldings.
ALL SIZES NOMINAL
M&M#
R.E. Step Casing
420M
3/4” x 2-3/4” - 16’
Ultralite
421M
3/4” x 3-1/4” - 16’
Ultralite
682M
1” x 3-1/4” - 16’
Ultralite
M&M#
R.E. Casing
413LO
413LPOP
3/4” x 3-1/4”- 7’2”& RL
3/4” x 3-1/4”- 7’2”& RL
Oak
Poplar
413LPRI
3/4” x 3-1/4” - 14’6”
FJ Pop Primed
1015M
3/4” x 3-1/2”- 16´
Ultralite
10
Moulding Selection Guide
Casings
M&M#
Ranch Casing
327
11/16” x 2-1/4”- 7’& RL
Solid Pine
327J
11/16” x 2-1/4”- 14´
FJ Pine Primed
9027PRI
9/16” x 2-1/4”- 14´
FJ Pop Primed
M&M#
R.E. Casing
472M
472P
5/8” x 2-1/2”- 8’ & 16’
9/16” x 2-1/2”- 16’
Ultralite
FJ Pine Primed
472FJ
9/16” x 2-1/2” - 16’
FJ Raw Pine
473LM
473MAP
473POP
473PRI
5/8” x 2-1/4” - 14’
5/8” x 2-1/4” - RL & 7´
5/8” x 2-1/4” - RL & 7´
5/8” x 2-1/4” - 7´ & 14´
Ultralite
Maple
Poplar
FJ Pop Primed
492
3/8” x 2-7/16” - RL
Solid Pine
9025PRI
5/8” x 2-1/2”- 14´
FJ Pop Primed
ALL SIZES NOMINAL
M&M#
R2E Casing
432
432P
9/16” x 3-1/2” - RL
9/16” x 3-1/2” - 16´
Solid Pine
FJ Pine Primed
432M
1/2” x 3-1/2” - 16’
Ultralite
432LO
15/32” x 3-1/2”- 7’6”& RL
Oak
432LPOP
15/32” x 3-1/2”- 7’6”& RL
Poplar
433FJ
9/16” x 3-1/4” - 16’
FJ Raw Pine
433
9/16” x 3-1/4” - RL
Solid Pine
9933PRI
1/2” x 3-1/2” - 15´
FJ Pop Primed
M&M#
Ranch Casing
330O
1/2” x 2-3/4” - RL & 7´6˝ Oak
327HO
9/16” x 2-1/4”- 7’& RL
324
324LO
324LPOP
11/16” x 2-1/4”- 7 & RL Solid Pine
7/16” x 2-1/4”- 7 & RL Oak
7/16” x 2-1/4”- 7 & RL Solid Poplar
M&M#
Casing
9021PRI
3/4” x 2-15/16” - 15’
M&M#
Ranch Casing
329L
9/16” x 2-3/4” - RL & 7´6˝ Solid Pine
Oak
FJ Pop Primed
M&M#
Casing
9038PRI
11/16” x 3-1/2”- 15´
FJ Pop Primed
M&M#
Casing
24136-E-CAM
3/4” x 4-1/4” - 16’
Ultralite
11
Moulding Selection Guide
Casings
Casings
Casings define the overall character of a room
and are often the most visible part of the trim.
They are used primarily to cover the gap between
drywall and the door or window frame. Casings
are generally thicker than the base mouldings.
ALL SIZES NOMINAL
ALL SIZES NOMINAL
M&M#
Reeded/Fluted Casing
194P
5/8” x 3-3/16” - 16’
FJ Pine Primed
M&M#
Reeded/Fluted Casing
4AVPOP
4AVPRI
3/4” x 3-1/2” - RL
3/4” x 3-1/2” - 14’6”
M&M#
Reeded/Fluted Casing
908LM
5/8” x 3-1/4” - 16’
M&M#
Casing
2488-CAM
2488-CAJ
3/4” x 2-3/4” - 16’
Ultralite
11/16” x 2-3/4” - 15’ + 7´4˝ FJ Pine Jesso
9023PRI
11/16” x 2-3/4” - 15´
FJ Pop Primed
Poplar
FJ Pop Primed
M&M#
Fluted Casing
24136-RF-CAPFJP 3/4” x 4-1/4” - 14’6”
M&M#
9921PRI
9939PRI
FJ Raw Poplar
Ultralite
M&M#
12
Moulding Selection Guide
Fluted Casing
24168-FCAPOP 3/4” x 5-1/4” - RL
Poplar
Casing
11/16˝ x 2-3/4˝ - 15´
11/16˝ x 3-1/2˝ - 16´
FJ Pop Primed
FJ Pop Primed
M&M#
Casing
32112-CAM
1” x 3-1/2” - 16’
Ultralite
13
Moulding Selection Guide
Casings
Casings
Casings define the overall character of a room
and are often the most visible part of the trim.
They are used primarily to cover the gap between
drywall and the door or window frame. Casings
are generally thicker than the base mouldings.
ALL SIZES NOMINAL
14
Moulding Selection Guide
M&M#
Casing
332
11/16˝ x 2-1/4˝ - RL + 7´ Solid Pine
M&M#
Casing
367SM
367SP
5/8˝ x 3-1/4˝ - 16´
5/8˝ x 3-1/4˝ - 16´
Ultralite
FJ Pine Primed
Casings define the overall character of a room
and are often the most visible part of the trim.
They are used primarily to cover the gap between
drywall and the door or window frame. Casings
are generally thicker than the base mouldings.
ALL SIZES NOMINAL
M&M#
Casing
9036PRI
13/16” x 3-1/2” - 16´
M&M#
Casing
367M
3/4˝ x 2-1/4˝ - 14´
Ultralite
M&M#
Casing
8063M
3/4” x 3-1/4” - 16’
M&M#
Casing
411M
3/4” x 3” - 16’
Ultralite
Ultralite
FJ Pop Primed
M&M#
Colonial Casing
449
449J
11/16” x 3-1/2” - RL
11/16” x 3-1/2” - 16’
Solid Pine
FJ Pine Jesso
M&M#
385M
Casing
5/8˝ x 2-1/2˝ - 16´ + 7´2˝ Ultralite
M&M#
9073M
Casing
1-3/8” x 4” - 16´
Ultralite
15
Moulding Selection Guide
Casings
Casings define the overall character of a room
and are often the most visible part of the trim.
They are used primarily to cover the gap between
drywall and the door or window frame. Casings
are generally thicker than the base mouldings.
ALL SIZES NOMINAL
Moulding Selection Guide
Architraves
M&M#
Casing
445J
11/16” x 3-1/4” - 16’ + 87˝ FJ Pine Jesso
In classical architecture, it described the main beam
resting on the tops of the columns. Today it is often
used as a decorative moulding for ornamentation or
finishing at the top of windows and doors.
ALL SIZES NOMINAL
M&M#
M&M#
24112-E-CAM
16
M&M#
Casing
445LM
3/4” x 3-1/4” - 16’ + 8´ Ultralite
Casing
3/4” x 3-1/2” - 16´
M&M#
Ultralite
9053M
Colonial Casing
M&M#
Architrave
1” x 4-1/2” - 16´
5010M
1-3/16” x 4-1/4” - 16´
Ultralite
M&M#
Architrave
24112-CAJ
11/16” x 3-1/2” - 16’
FJ Pine Jesso
9032POP
24112-CAM
3/4” x 3-1/2”- RL
3/4” x 3-1/2” - 16’
Poplar
Ultralite
9032PRI
3/4” x 3-1/2” - 16’ + 7´6˝ FJ Pop Primed
Architrave
34112-H-CAPRI 1-1/16” x 3-1/2” - 15’
FJ Pop Primed
523M
523P
Ultralite
FJ Pine Primed
1” x 3-1/2” - 16’
1-1/16” x 3-1/2”- 16’
Ultralite
17
Moulding Selection Guide
Backbands
Architraves
In classical architecture, it described the main beam
resting on the tops of the columns. Today it is often
used as a decorative moulding for ornamentation or
finishing at the top of windows and doors.
ALL SIZES NOMINAL
M&M#
M&M#
Architrave
480KP
11/16˝ x 3-1/2˝ - 16´
Moulding Selection Guide
5030M
Backbands are most commonly used in
combination with casings, and are used to
elevate and enhance the look of the casing
while adding a dramatic impact.
ALL SIZES NOMINAL
Architrave
1-3/16” x 6-1/4˝ - 16´
Ultralite
FJ Pine Primed
M&M#
M&M#
Pediment Mould
953LPOP
3/8” x 1-3/8” - RL
Poplar
Pediment Mould
200WCPOP 3/4” x 2” - RL
Poplar
Rabbet
7/32” x 17/32”
Rabbet
M&M#
R.E. Backband for 1/2˝ Casing
9701PRI
3/4” x 13/16” - 16´
1/4˝ x 3/4˝
FJ Pop Primed
M&M#
Backband for 3/4˝ Casing
2844BBP
7/8˝ x 1-3/8˝
Solid Pine
Rabbet
1/4” x 11/16”
M&M#
Backband for 11/16˝ Casing
818MF08
1” x 1-1/8” - 8’
Ultralite
Rabbet
Rabbet
7/32” x 17/32”
5/16” x 17/32”
M&M#
R.E. Backband for 1/2˝ Casing
M&M#
Backband for 1/2˝ Casing
280
11/16” x 1” - RL
1016O
1016POP
3/4” x 1”- RL
3/4” x 1”- 7’6”& RL
Solid Pine
Oak
Poplar
Rabbet
1/4” x 11/16”
Rabbet
M&M#
Casing
34136-CAPRI 1-1/16” x 4-1/4” - 15’
34136-CAPOP 1-1/16” x 4-1/4” - RL
18
M&M#
FJ Pop Primed
Poplar
3/16” x 11/16”
Architrave
190DHPOP 1-1/16” x 5-1/4” - RL
190DHM 1-1/16” x 5-1/4” - 16´
Poplar
Ultralite
M&M#
M&M#
Backband for 11/16˝ to 3/4˝ Casing
3652-BBPOP 1-1/8” x 1-5/8” - RL
Backband for 11/16˝ to 3/4˝ Casing
3436-BBPOP 1-1/16” x 1-1/8”- 7’6” + RL Poplar
Rabbet
1/4” x 11/16”
Poplar
M&M#
Backband for 11/16˝ Casing
282M
1-1/8” x 1-9/16” - 16´
Ultralite
19
Moulding Selection Guide
Baseboards
Baseboards
Baseboards are placed along the wall at the floor.
They should be chosen to work in harmony with
your casings to finish and tie the room together.
Baseboards are usually thinner than the casing.
ALL SIZES NOMINAL
M&M#
Baseboard
545M
5/8” x 5” - 16’
20
Moulding Selection Guide
M&M#
Baseboard
526M
5/8” x 5-1/4” - 16’
Ultralite
Baseboards are placed along the wall at the floor.
They should be chosen to work in harmony with
your casings to finish and tie the room together.
Baseboards are usually thinner than the casing.
ALL SIZES NOMINAL
M&M#
Baseboard
412M
5/8” x 4-1/4” - 16’
Ultralite
M&M#
Baseboard
8263M
5/8” x 6-1/2” - 16’
Ultralite
Ultralite
M&M#
Speed Baseboard
163EM
5/8” x 5-1/4” - 16’
Ultralite
163E-7M
5/8” x 7-1/4” - 16’
Ultralite
M&M#
Baseboard
207M
5/8” x 7-1/4” - 16´
M&M#
Baseboard
18136-BPRI 9/16” x 4-1/4” - 16’ FJ Pop Primed
Ultralite
M&M#
Victorian Baseboard
20160-BM
5/8” x 5” - 16’
Ultralite
18168-BPRI 9/16” x 5-1/4” - 16’ FJ Pop Primed
18232-BPOP 9/16” x 7-1/4” - RL
Poplar
21
Moulding Selection Guide
Baseboards
9157PRI
7/16” x 5-1/4” - 16´
M&M#
Baseboard
633L
633LO
633LJ
633LMAP
7/16” x 3-1/4” - RL
7/16” x 3-1/4” - RL
7/16” x 3-1/4” - 16´
7/16” x 3-1/4” - RL
Solid Pine
Oak
FJ Pine Jesso
Maple
623M
1/2” x 3-1/4” - 16’
Ultralite
623
623P
623J
9/16” x 3-1/4” - RL & 16´ Solid Pine
9/16” x 3-1/4” - 16’
FJ Pine Primed
9/16” x 3-1/4” - 16’
FJ Pine Jesso
634M
634L
634LPOP
634LPRI
634LJ
1/2” x 3” - 16’
3/8” x 3” - RL
3/8” x 3” - RL
3/8” x 3” - RL
7/16” x 3” - 16´
Ultralite
Solid Pine
Poplar
FJ Pop Primed
FJ Pine Jesso
635CE
635O
635MAP
635POP
5/16” x 2-3/4” - 14´
3/8” x 2-3/4” - RL
3/8” x 2-3/4” - RL
3/8” x 2-3/4” - RL
P/E Chesapeake
Oak
Maple
Poplar
636SO
3/8” x 3” - RL
Oak
637SO
3/8” x 3-1/4” - RL
Oak
9130PRI
1/2” x 3-1/4” - 16’
FJ Pop Primed
9121PRI
3/8” x 2-3/4” - 16’
FJ Pop Primed
22
Baseboards
Baseboards
M&M#
Baseboard
618J
618
618M
9/16” x 5-1/4” - 16’
9/16” x 5-1/4” - RL
1/2” x 5-1/4” - 16´
Baseboards are placed along the wall at the floor.
They should be chosen to work in harmony with
your casings to finish and tie the room together.
Baseboards are usually thinner than the casing.
ALL SIZES NOMINAL
M&M#
Baseboard
Moulding Selection Guide
FJ Pine Jesso
Solid Pine
Ultralite
Baseboards are placed along the wall at the floor.
They should be chosen to work in harmony with
your casings to finish and tie the room together.
Baseboards are usually thinner than the casing.
ALL SIZES NOMINAL
M&M#
Baseboard
10663SBM 5/8” x 11-1/4” - 16´
Ultralite
FJ Pop Primed
M&M#
Baseboard
620O
7/16” x 4-1/4” - RL
Oak
9140POP
9140PRI
1/2” x 4-1/4” - RL
1/2” x 4-1/4” - 16’
Poplar
FJ Pop Primed
Baseboard
M&M#
Baseboard
620
620J
9/16” x 4-1/4” - RL
9/16” x 4-1/4” - 16’
Solid Pine
FJ Pine Jesso
9283M
1-3/16” x 7-1/4” - 16´
620LM
1/2” x 4-1/4” - 16’
Ultralite
M&M#
M&M#
Baseboard
9263M
3/4” x 7-1/16” - 16´
Ultralite
M&M#
Ultralite
Baseboard (shown at 80%)
10623SBM 5/8” x 11-1/4” - 16´
Ultralite
23
Moulding Selection Guide
Baseboards
Moulding Selection Guide
Baseboards
Baseboards are placed along the wall at the floor.
They should be chosen to work in harmony with
your casings to finish and tie the room together.
Baseboards are usually thinner than the casing.
ALL SIZES NOMINAL
M&M#
Base Cap
2010
2010O
2010POP
9/16” x 1-5/8” - RL
7/16” x 1-3/4” - RL
7/16” x 1-3/4” - RL
Baseboards are placed along the wall at the floor.
They should be chosen to work in harmony with
your casings to finish and tie the room together.
Baseboards are usually thinner than the casing.
ALL SIZES NOMINAL
Solid Pine
Oak
Poplar
The 2010 Base Cap for use with the 2009 Pilaster Baseboard
M&M#
Ranch Baseboard
723L
723LP
723O
7/16” x 3-1/4” - RL
7/16” x 3-1/4” - 16´
7/16” x 3-1/4” - RL
Solid Pine
FJ Pine Primed
Oak
724L
7/16”x 3” - RL + 8´
Solid Pine
725O
3/8” x 3” - RL
Oak
726O
3/8” x 2-3/4” - RL
Oak
9132PRI
713
713P
3/8” x 3” - 16’
9/16˝ x 3-1/4˝ - RL
9/16˝ x 3-1/4˝ - 16´
FJ Pop Primed
Solid Pine
FJ Pine Primed
M&M#
R1E Baseboard
61
1/2” x 4-1/4” - RL
Solid Pine
M&M#
Baseboard
9158PRI
5/8” x 5-1/4” - 16’
M&M#
Baseboard
20104-CBM
5/8” x 3-1/4” - 16’
FJ Pop Primed
Ultralite
M&M#
Baseboard
9142PRI
9142POP
7/16” x 4-1/4” - 16’
7/16” x 4-1/4” - RL
FJ Pop Primed
Poplar
M&M#
R1E Baseboard
430M
430SM
430LM
430J
5/8” x 4-1/4” - 16’ E2E
1/2” x 4-1/4” - 16’ E2E
5/8” x 5-1/2” - 16’ E2E
5/8” x 5-1/2” - 16’ E2E
431POP
3/8” x 4-1/4” - 16’ E1E Poplar
M&M#
Baseboard
9/16” x 3-1/4” - 16´
FJ Pine Jesso
Ultralite
Ultralite
Ultralite
FJ Pine Jesso
432L
9/16” x 5-1/2” - RL
Solid Pine
9135PRI
3/8” x 4-1/4” - 16’ E1E FJ Pop Primed
2805J
433LM
433LO
433LMAP
433LPOP
1/2” x 3-1/4” - 16’
1/2” x 3-1/4” - RL
1/2” x 3-1/4” - RL
1/2” x 3-1/4” - RL
Ultralite
Oak
Maple
Poplar
9144PRI
9144POP
3/8” x 4-1/4” - 16’ E1E FJ Pop Primed
3/8” x 4-1/4” - 16’ E1E Poplar
2808J
2808O
9/16” x 4-1/4” - 16´
7/16” x 4-1/4” - RL
FJ Pine Jesso
Oak
9145PRI
11/16” x 4-1/4” - 16’ E1E FJ Pop Primed
2014O
7/16” x 4-1/4” - RL
Oak
2813O
2813POP
2813J
7/16” x 5-1/4” - RL
7/16” x 5-1/4” - RL
9/16” x 5-1/4” - 16´
Oak
Poplar
FJ Pine Jesso
9153PRI
7/16” x 5-1/4” - 16’
FJ Pop Primed
24
M&M#
Pilaster Baseboard
2009
2009O
2009POP
2009J
9/16” x 5-1/4” - RL
7/16” x 5-7/16” - RL
7/16” x 5-7/16” - RL
7/16” x 5-7/16” - RL
Solid Pine
Oak
Poplar
FJ Pine Jesso
M&M#
Baseboard
554M
1/2˝ x 4-1/2˝ - 16´
Ultralite
M&M#
Baseboard
9143PRI
1/2” x 4-1/4” - 16’
FJ Pop Primed
25
Moulding Selection Guide
Baseboards
Baseboards
Baseboards are placed along the wall at the floor.
They should be chosen to work in harmony with
your casings to finish and tie the room together.
Baseboards are usually thinner than the casing.
ALL SIZES NOMINAL
M&M#
Baseboard
658
9/16 x 5-1/4˝ - RL
26
Moulding Selection Guide
M&M#
Baseboard
660J
9/16” x 4-1/4” - 16’
Solid Pine
M&M#
Baseboard
9141PRI
9141POP
5/8” x 4-1/4” - 16’
5/8” x 4-1/4” - RL
Baseboards are placed along the wall at the floor.
They should be chosen to work in harmony with
your casings to finish and tie the room together.
Baseboards are usually thinner than the casing.
ALL SIZES NOMINAL
FJ Pop Primed
Poplar
9151PRI
9151POP
5/8” x 5-1/4” - 16’
5/8” x 5-1/4” - RL
FJ Pop Primed
Poplar
9171PRI
9171POP
5/8” x 7-1/4” - 16’
5/8” x 7-1/4” - RL
FJ Pop Primed
Poplar
M&M#
Baseboard
20136-CBM
5/8” x 4-1/4” - 16’
Ultralite
20168-CBM
5/8” x 5-1/4” - 16’
Ultralite
20232-CBM
5/8” x 7-1/4” - 16’
Ultralite
22136-CB
22136-CBO
11/16” x 4-1/4” - RL
11/16” x 4-1/4” - RL
Solid Pine
Oak
22168-CB
11/16” x 5-1/4” - RL
22168-CBO 11/16” x 5-1/4” - RL
22168-CBMAP 11/16” x 5-1/4” - RL
Solid Pine
Oak
Maple
22232-CBO
Oak
11/16” x 7-1/4” - RL
M&M#
Beaded/Victorian Baseboard
18136-TBPRI 9/16” x 4-1/4” - 16’
FJ Pine Jesso
M&M#
Baseboard
663
663M
663J
9/16” x 3-1/4˝ - RL
1/2˝ x 3-1/4˝ - 16’
9/16” x 3-1/4˝ - 16’
Solid Pine
Ultralite
FJ Pine Jesso
M&M#
Beaded Baseboard
20136-EBM
5/8” x 4-1/4” - 16’
FJ Pop Primed
M&M#
Beaded Baseboard
9152PRI
9152POP
5/8” x 5-1/4” - 16’
5/8” x 5-1/4” - RL
FJ Pop Primed
Poplar
20168-EBM
5/8” x 5-1/4” - 16’
Ultralite
M&M#
Beaded Baseboard
22168-EBO
11/16” x 5-1/4” - RL
Ultralite
Oak
M&M#
Beaded Baseboard
9172PRI
9172POP
5/8” x 7-1/4” - 16’
5/8” x 7-1/4” - RL
FJ Pop Primed
Poplar
20232-EBM
5/8” x 7-1/4” - 16’
Ultralite
27
Moulding Selection Guide
Crowns
Base Caps
Crowns are placed along the wall at the ceiling. They
come in a wide range of patterns and sizes. Crowns
soften the transition from wall to ceiling while adding
a distinctive look and charm to your room.
ALL SIZES NOMINAL
ALL SIZES NOMINAL
M&M#
163P
M&M#
Base Cap
166L
166P
11/16” x 1-1/4”- RL
Solid Pine
5/8” x 1-1/4”- 16´ w/ trims FJ Pine Primed
167P
11/16” x 1-1/8”- 16´ w/ trims FJ Pine Primed
Crown
41M
1-3/16” x 6-5/16” - 16’
Ultralite
3/4” x 1-3/8” - 16´
11/16” x 1-3/8” - 16´
Poplar
Ultralite
FJ Pine Primed
M&M#
M&M#
Crown
785M
11/16” x 4-5/8” - 16’
Ultralite
Base Cap
622BAPOP 3/4” x 1-1/2” - RL
Poplar
M&M#
Base Cap
2664-PPOP 13/16” x 2” - RL
M&M#
M&M#
Base Cap
2244-B-CAPPOP 11/16” x 1-3/8” - RL
163M
Moulding Selection Guide
Poplar
Base Cap
200PMPOP 3/4” x 1-9/16” - RL
Poplar
M&M#
Base Cap
2148-CBPOP 21/32” x 1-1/2” - RL
Poplar
M&M#
28
M&M#
Base Cap
18P
5/8˝ x 1-7/16˝- 16´
FJ Pine Primed
M&M#
Crown
40M
5/8” x 4-1/4” - 16’
Ultralite
Beaded Crown
24136-C-CRPOP 3/4” x 4-1/4” - RL
24136-C-CRPRI 3/4” x 4-1/4” - 16’
Poplar
FJ Pop Primed
29
Moulding Selection Guide
Crowns
Crowns
Crowns are placed along the wall at the ceiling.
They come in a wide range of patterns and
sizes. Crowns soften the transition from wall
to ceiling while adding a distinctive look and
charm to your room.
ALL SIZES NOMINAL
M&M#
Crowns are placed along the wall at the ceiling. They
come in a wide range of patterns and sizes. Crowns
soften the transition from wall to ceiling while adding
a distinctive look and charm to your room
ALL SIZES NOMINAL
Beaded Crown
24136-A-CRO 3/4” x 4-1/4” - RL
24136-A-CRM 3/4” x 4-1/4” - 16’
9245PRI
9245POP
M&M#
Oak
Ultralite
5/8” x 4-1/4” - 16’ w/ trims FJ Pop Primed
5/8” x 4-1/4” - RL
Poplar
Beaded Crown
26192-CRO 13/16” x 6” - RL
26192-CRPOP 13/16” x 6” - RL
26192-CRPRI 13/16” x 6” - 16’
M&M#
Crown
54LO
1/2” x 2-1/4” - RL
Oak
Oak
Poplar
FJ Pop Primed
M&M#
30
Moulding Selection Guide
M&M#
Crown
784M
11/16” x 3-3/4” - 16´
Ultralite
M&M#
Crown
60
60P
9/16˝ x 1-3/4˝ - RL
9/16˝ x 1-3/4˝ - 16´
Poplar
FJ Pop Primed
Ultralite
M&M#
Bed Mould
74
75
9/16” x 1-3/4” - RL
9/16” x 1-5/8” - RL
Crown
49M
49LJ
49L
49O
5/8” x 3-5/8” - 16’
9/16” x 3-5/8” - 16’
9/16” x 3-5/8” - RL
3/4” x 3-5/8” - RL
Ultralite
FJ Pine Jesso
Solid Pine
Oak
9230PRI
9230POP
1/2” x 3-9/16” - 16’
1/2” x 3-9/16” - RL
FJ Pop Primed
Poplar
M&M#
Crown
45O
3/4” x 5-1/4” - RL
Oak
9250PRI
9250POP
11/16” x 5-1/4” - 16’
11/16” x 5-1/4” - RL
FJ Pop Primed
FJ Pop Primed
Solid Pine
FJ Pine Primed
Beaded Crown
24168-C-CRPOP 13/16” x 5-1/4” - RL
24168-C-CRPRI 13/16” x 5-1/4” - 16’
24168-C-CRM 3/4” x 5-1/4” - 16’
M&M#
Solid Pine
Solid Pine
31
Moulding Selection Guide
Crowns
M&M#
Crowns
Crown
104-CRPOP 3/4” x 2-1/4” - RL
Crowns are placed along the wall at the ceiling. They
come in a wide range of patterns and sizes. Crowns
soften the transition from wall to ceiling while adding
a distinctive look and charm to your room.
ALL SIZES NOMINAL
Moulding Selection Guide
Poplar
Crowns are placed along the wall at the ceiling. They
come in a wide range of patterns and sizes. Crowns
soften the transition from wall to ceiling while adding
a distinctive look and charm to your room
ALL SIZES NOMINAL
M&M#
Crown
24168-QA-CRPRI 3/4” x 5-1/4” - 16’
32
M&M#
Crown
28192-CRM
3/4” x 6” - 16’
FJ Pop Primed
Ultralite
M&M#
Crown
830M
3/4˝ x 5-1/2” - 16’
M&M#
Crown
4800PRI
13/16” x 7” - 16’
FJ Pop Primed
M&M#
Crown
712M
712POP
3/4” x 4-1/2” - 16’
13/16” x 4-1/2” - RL
M&M#
Ultralite
Poplar
Crown
34232-A-CRPRI 1-1/16” x 7-1/4” - 16’
34232-A-CRM 1-1/16” x 7-1/4” - 16’
FJ Pop Primed
Ultralite
Ultralite
33
Moulding Selection Guide
Crowns
Crowns
Crowns are placed along the wall at the ceiling. They
come in a wide range of patterns and sizes. Crowns
soften the transition from wall to ceiling while adding
a distinctive look and charm to your room.
ALL SIZES NOMINAL
34
Moulding Selection Guide
M&M#
Crown
51LM
51LO
51LPOP
51L
51LJ
5/8” x 3-1/4” - 16’
5/8” x 3-1/4” - RL
5/8” x 3-1/4” - RL
1/2” x 3-1/4” - RL
9/16” x 3-1/4” - 16’
Ultralite
Oak
Poplar
Solid Pine
FJ Pine Jesso
Crowns are placed along the wall at the ceiling. They
come in a wide range of patterns and sizes. Crowns
soften the transition from wall to ceiling while adding
a distinctive look and charm to your room
ALL SIZES NOMINAL
M&M#
Crown
47LO
47LJ
47M
11/16˝ x 4-9/16˝ - RL
Oak
9/16˝ x 4-9/16˝ 16´ w/ trims FJ Pine Jesso
5/8˝ x 4-5/8˝ - 16´
Ultralite
48O
48L
48LJ
48LM
48LPOP
48LPRI
11/16” x 4-1/4” - RL
9/16” x 4-1/4” - RL
9/16” x 4-1/4” - 16’
5/8” x 4-1/4” - 16’
5/8” x 4-1/4” - RL
5/8” x 4-1/4” - 16’
Oak
Solid Pine
FJ Pine Jesso
Ultralite
Poplar
FJ Pop Primed
9241PRI
1/2” x 4-1/4” - 16´
FJ Pop Primed
M&M#
Crown
45LM
45LJ
45L
5/8” x 5-1/4” - 16’
9/16” x 5-1/4” - 16´
9/16” x 5-3/16” - RL
M&M#
Crown
9251PRI
9251POP
5/8˝ x 5-1/4” - 16’
5/8˝ x 5-1/4” - RL
M&M#
Crown
54
54P
9/16” x 2-1/4” - RL
9/16” x 2-1/4” - 16´
Solid Pine
FJ Pine Primed
52
9/16” x 2-3/4” - RL
Solid Pine
M&M#
Crown
4009POP
11/16” x 6-11/16” - RL Poplar
Ultralite
FJ Pine Jesso
Solid Pine
FJ Pop Primed
Poplar
M&M#
Crown
68LPOP
7/16” x 1-9/16” - RL
Poplar
M&M#
Crown
43M
1” x 6-15/16”- 16’
34232BCRPOP 1-1/16” x 7-1/4” - RL
Ultralite
Poplar
35
Moulding Selection Guide
Crowns
Crowns are placed along the wall
at the ceiling. They come in a wide
range of patterns and sizes. Crowns
soften the transition from wall to
ceiling while adding a distinctive look
and charm to your room.
Moulding Selection Guide
Crowns
M&M#
Crown
2153M
3/4˝ x 5-1/4˝ - 16´
Ultralite
Crowns are placed along the wall at the ceiling. They
come in a wide range of patterns and sizes. Crowns
soften the transition from wall to ceiling while adding
a distinctive look and charm to your room
ALL SIZES NOMINAL
M&M#
Beaded Crown
24168ACRM 3/4” x 5-1/4” - 16’
Ultralite
90M
Ultralite
3/4” x 6” - 16’
ALL SIZES NOMINAL
M&M#
Crown
9253PRI
11/16˝ x 5-1/4˝ - 16´
Beaded Crown
27M
3/4˝ x 7˝ - 16´
Ultralite
FJ Pop Primed
M&M#
Dentil Crown
(used with 2502 Dentil on p. 39)
6LAVO
6LAVPOP
3/4” x 5-1/4” - RL
3/4” x 5-1/4” - RL
36
M&M#
Oak
Poplar
M&M#
Crown
505M
1˝ x 7˝ - 16´
Ultralite
M&M#
Beaded Crown
32242CRM
7/8” x 7-1/4” - 16’
Ultralite
37
Moulding Selection Guide
Crowns
Moulding Selection Guide
Dentils & Rope
Crowns are placed along the wall at the
ceiling. They come in a wide range of
patterns and sizes. Crowns soften the
transition from wall to ceiling while adding a
distinctive look and charm to your room.
ALL SIZES NOMINAL
A moulding pattern with a series of closely spaced
rectangular blocks and spaces. Used especially in
classic architecture.
ALL SIZES NOMINAL
M&M#
Crown
37CCM
5/8” x 5” - 16´
Ultralite
M&M#
Dentil Crown - Insert
M&M#
Dentil Crown - Insert
2504POP
1/2” x 5/8” - RL
2502O
2502POP
11/16” x 7/8” - RL
11/16” x 7/8” - RL
Poplar
Oak
Poplar
Crown Enhancers
ALL SIZES NOMINAL
M&M#
Crown (Shown at 85%)
730M
1-3/16” x 10-1/2” - 16´ Ultralite
M&M#
Crown Enhancer
140TCPOP 1” x 2-1/8” - RL
Poplar
M&M#
38
M&M#
Crown
9246PRI
11/16 x 4-1/4˝ - 16´
FJ Pop Primed
M&M#
Crown Enhancer
150TCLPOP
1-3/4˝ x 2-1/4˝ - RL
Crown Enhancer
2480CBP
11/16” x 2-1/2” - 16´
2480CBPOP 3/4” x 2-1/2” - RL
FJ Pine Primed
Poplar
9520PRI
FJ Pop Primed
5/8” x 2-3/4” - 16´
Poplar
39
Moulding Selection Guide
Coves
Chair Rails
Coves are commonly used to soften the
transition on inside corners but may be
used for a wide range of applications.
ALL SIZES NOMINAL
Chair Rails are practical as well as decorative. Applied
to a wall, anywhere from 24 to 48 inches from the floor,
they protect the wall from scuffs and dents from the
backs of chairs as well as adding a distinctive accent to
any room.
ALL SIZES NOMINAL
M&M#
Cove
84L
9/16” x 2-1/4” - RL
Solid Pine
85
9/16˝ x 1-3/4˝ - RL + 8´
Solid Pine
86
9/16” x 1-5/8” - RL
Solid Pine
M&M#
Reverse Cove
5012POP
3/4” x 3/4” - RL
M&M#
Cove
2024POP
5/8” x 3/4” - RL
40
Moulding Selection Guide
M&M#
M&M#
Reverse Cove
100O
100P
100
11/16” x 11/16” - RL Oak
11/16” x 11/16” -16´ FJ Pine Primed
11/16” x 11/16” - RL + 8´ Solid Pine
M&M#
Cove
96LPOP
1/2˝ x 3/4˝ - RL
M&M#
Cove
90
11/16” x 1-1/8” - RL
M&M#
Chair Rail
32104CHPOP
32104CHP
32104CHM
32104CHO
32104CHPRI
1” x 3-1/4” - RL
1” x 3-1/4” - 16´
1” x 3-1/4” - 16´
1” x 3-1/4” - RL
1” x 3-1/4” - 16´
Poplar
FJ Pine Primed
Ultralite
Oak
FJ Pop Primed
Chair Rail
16104CHPOP 1/2” x 3-1/4” - RL
M&M#
Poplar
Chair Rail
203CHPOP 11/16” x 2-3/8” - RL
Poplar
Poplar
M&M#
Chair Rail
390LPOP
390J
390
390MO
390LM
5/8” x 2-1/2” - RL
11/16” x 2-5/8” - 16’
11/16” x 2-5/8” - RL
5/8” x 2-1/2” - RL
5/8” x 2-1/2” - 16’
Poplar
FJ Pine Jesso
Solid Pine
Oak
Ultralite
9320PRI
5/8” x 2-5/8” - 16’
FJ Pop Primed
Solid Pine
Poplar
Poplar
M&M#
Cove
101
101O
1/2” x 1/2” - RL
1/2” x 1/2” - RL
Solid Pine
Oak
93
93O
93POP
93PRI
93MAP
3/4” x 3/4” - RL + 8´
3/4” x 3/4” - RL
3/4” x 3/4” - RL
3/4” x 3/4” -16´
3/4” x 3/4” -16´
Solid Pine
Oak
Poplar
FJ Pop Primed
Maple
M&M#
Chair Rail
2288CHPOP 11/16” x 2-3/4” - RL
M&M#
Chair Rail
22104CHPOP 11/16” x 3-1/4” - RL
Poplar
Poplar
M&M#
Chair Rail
5006POP
13/16” x 2-1/2” - RL
Poplar
M&M#
Chair Rail Backer
200CHPOP
11/16” x 4-1/4” - RL
Poplar
41
Moulding Selection Guide
Panel Moulds
Panel Moulds are used to frame wall paneling
and add an accent to your walls. Often used in
furniture construction.
M&M#
Panel Mould
9514PRI
11/16” x 1-5/8” - 16’
Panel Mould
134LPOP
5/8” x 1-1/4” - RL
Panel Mould
140POP
7/16” x 1-1/4” - RL
M&M#
Panel Mould
182
11/16˝ x 1-5/8˝ - RL
ALL SIZES NOMINAL
M&M#
M&M#
Moulding Selection Guide
Panel Moulds
Poplar
Solid Pine
Panel Moulds are used to frame wall paneling
and add an accent to your walls. Often used in
furniture construction.
ALL SIZES NOMINAL
Poplar
FJ Pop Primed
M&M#
M&M#
Panel Mould
185KO
185
7/16” x 1-3/8” - RL
9/16” x 1-1/2” - RL
M&M#
Panel Mould
9512PRI
5/8” x 1-1/2” - 16’
M&M#
Panel Mould
184P
1/2” x 1-1/2” - 16´
M&M#
Panel Mould
185YPOP
5/16” x 1-1/4” - RL
FJ Pine Primed
M&M#
Panel Mould
427
9/16” x 1-1/8” - RL
Panel Mould
348OF08 3/4” x 9/16” - 8’
348POPF08 3/4” x 9/16” - 8’
Oak
Poplar
1148POPF08 11/16” x 1-1/4” - 8’
Poplar
Solid Pine
Poplar
FJ Pop Primed
Oak
Solid Pine
M&M#
Panel Mould
989
3/8” x 1-1/8” - RL
M&M#
Panel Mould
462
1/2˝ x 1˝ - RL
M&M#
Panel Mould
1846POP
9/16” x 1-7/16” - RL
Poplar
Solid Pine
Solid Pine
M&M#
Shingle/Panel Mould
309PTPOP 5/8” x 1-1/2” - RL
M&M#
Panel Mould
9516PRI
9/16” x 1-1/2” - 16’
42
Panel Mould
1648POP
1/2” x 1-1/2” - RL
Poplar
Bar Rail
4096O
1-1/4” x 3” - RL
Oak
56144O
1-3/4” x 4-1/2” - RL
Oak
FJ Pop Primed
M&M#
M&M#
M&M#
Poplar
Panel Mould
2448BMPOP 3/4” x 1-1/2” - RL
2448BMFJP 3/4” x 1-1/2” - 16’
Poplar
FJ Raw Poplar
43
Moulding Selection Guide
Moulding Selection Guide
Door Stops
Panel Moulds
Panel Moulds are used to frame wall paneling
and add an accent to your walls. Often used in
furniture construction.
ALL SIZES NOMINAL
The Door Stop mouldings are attached to the
door jamb on both sides and at the top. It is
where the door comes to a rest when it is closed
stopping the door from moving any further, and
covering the gap that would otherwise appear
between the door and the jambs.
ALL SIZES NOMINAL
5/16˝
M&M#
Ply Cap
292L
5/8” x 1-1/8” - RL + 8´ Solid Pine
Adjustable
3/16˝ to 3/4˝
M&M#
Oak
Poplar
Adjustable
1/4˝ to 3/4˝
Panel Mould
6PM
6PMPOP
11/16” x 2” - RL
13/16” x 2-1/8” - RL
M&M#
Door Stop
974
3/8˝ x 1-3/8˝- RL
M&M#
R.E. Double Bullnose Stop
887LP
887LMAP
887LPOP
887LPRI
887LO
887
887CEF07
3/8” x 1-1/4” - 7’ - 16´
3/8” x 1-1/4” - 7’ - 16´
3/8” x 1-1/4” - 7’ - 16´
3/8” x 1-1/4” - 7’ - 16´
3/8” x 1-3/16”- RL & 7’
5/16” x 1-1/4”- RL & 7’
5/16” x 1-1/4”- 7’
3/4” x 2-3/4” - RL
44
3/8” x 1-5/8” - RL
Solid Pine
Ultralite E2E
FJ Pop Primed E2E
M&M#
Stop
890POP
11/32” x 7/8” - RL
Poplar
M&M#
Stop OG
906
7/16” x 1-3/8” - RL
Solid Pine
905L
905LP
7/16” x 1-5/8”- RL
7/16” x 1-5/8”- 16´
Solid Pine
FJ Pine Primed
M&M#
Ranch Door Stop
846
846MAP
846O
846POP
7/16” x 1-3/8”- 7’& RL
7/16” x 1-3/8”- 7’& RL
7/16” x 1-3/8”- 7’& RL
7/16” x 1-3/8”- 7’& RL
Solid Pine
Maple
Oak
Poplar
855
7/16” x 1-5/8” - RL
Solid Pine
Poplar
1/2˝ x 3/4˝
rabbet
1/2˝
Panel Mould
885
Ply Cap
2664-PRPOP 13/16” x 2” - RL
7PMPOP
Solid Pine
FJ Pine Primed E1E
Maple
Poplar
FJ Pop Primed
Oak
Pine E2E
P/E Chesapeake
Poplar
1/2˝ x 1/2˝
rabbet
M&M#
7/16” x 1-3/8” - RL
R.E. Double Bullnose Stop
877LMI90 1/2” x 1-1/4”- 7´6˝
877LPRII98 1/2” x 1-1/4”- 8´2˝
Solid Pine
Ply Cap
2424RPOP 3/4” x 3/4” - RL
M&M#
M&M#
M&M#
1/4˝ x 1/2˝
rabbet
Solid Pine
Poplar
R1E Door Stop
876
Ply Cap
2464PMO
3/4” x 2” - RL
2464PMPOP 3/4” x 2” - RL
M&M#
M&M#
M&M#
Poplar
Ply Cap
3264-PRPOP 1” x 2” - RL
Poplar
M&M#
Bi-Fold Stop
313MAPF07 11/16” x 1-5/8” - 7´
313OF07
11/16” x 1-5/8” - 7´
M&M#
Maple
Oak
Bi-Fold Stop
313F07
11/16” x 1-3/8” - 7´
313BFPOPF07 11/16” x 1-3/8” - 7´
Solid Pine
Poplar
45
Moulding Selection Guide
Door Stops
Moulding Selection Guide
Wainscot
ALL SIZES NOMINAL
M&M#
Stop
950LMAP
950LPOP
3/8” x 7/8” - RL
3/8” x 27/32” - RL
M&M#
Door Stop
941LPRI
7/16˝ x 3/4˝ - 16´
FJ Pop Primed
M&M#
Colonial Door Stop
M&M#
Colonial Door Stop
945
945O
3/8” x 1-5/8” - RL
3/8” x 1-5/8” - RL
Solid Pine
Oak
946
3/8” x 1-3/8”- 7’& RL
Solid Pine
937MF07
937PRI
937
1/2” x 1-1/4” - 7´
Ultralite
7/16” x 1-1/4” - 7’, 8´6˝ + 16´ FJ Pop Primed
7/16” x 1-1/4” - RL
Solid Pine
947
947MAP
947P
947CEF07
947O
947POP
3/8” x 1-1/4”- 7’& RL
3/8” x 1-1/4”- 7’& RL
3/8” x 1-1/4”- 7’ & 17’
5/16” x 1-3/16” - 7’
3/8” x 1-1/4” - 7’ & RL
3/8” x 1-1/4” - 7’ & RL
936PF07
7/16” x 1-3/8” - 7’
FJ Pine Primed
Hand & Wall Rails
Handrails provide safety and support.
ALL SIZES NOMINAL
M&M#
Handrail
55FJPF16
1-3/4” x 2-1/4” - 16´
Trimwork installed in the area below a chair rail. Numerous
options are available including raised panel, shadow box and
beaded ceiling. Combined with a chair rail and baseboard,
Wainscoting creates a dramatic look to any room.
PLEASE CALL TO CHECK AVAILABILITY.
Maple
Poplar
M&M#
Wainscot - Beaded
584TVGP
584TVGH
9/16” x 3-5/16” - 16´ FJ Primed Pine
9/16” x 3-1/4” - 8´-20´ Hemlock
Solid Pine
Maple
FJ Pine Primed
P/E Chesapeake
Oak
Poplar
M&M#
Colonial Door Stop
943L
3/8” x 2-1/8” - RL
M&M#
Wall Rail
231
231FJH
231FJP
231H
1-7/16” x 1-5/8” - 16´
1-7/16” x 1-5/8” - 12´,16´, 18´
1-1/2” x 1-11/16” - 16´
1-7/16” x 1-5/8” - 12´,14´16´
Solid Pine
M&M#
Wainscot - Beaded
5834M
5/8” x 3” - 16’
M&M#
Ultralite
Wainscot - Beaded
3834TVGPOP 3/8” x 3” - RL
Poplar
Solid Pine
FJ Hemlock
Raw FJ Poplar
Solid Hemlock
Raw FJ Poplar
M&M#
Handrail
6010HF16 2-1/4” x 2-3/8” - 16´
6010FJO 2-1/4” x 2-3/8” - 16´
Hemlock
FJ Oak
M&M#
Wainscot
3454TVGP
3/4” x 5-3/8” - 16´
FJ Primed Pine
Glass Beads
Glass Beads are commonly used to hold glass
in position.
ALL SIZES NOMINAL
46
M&M#
Wall Rail
240FJO
240
1-1/16” x 2-1/4” - 16´
1-1/4” x 2-1/4” - 16´
FJ Oak
Solid Pine
M&M#
Glass Bead
2323BPOP 23/32” x 23/32” - RL
Poplar
M&M#
Glass Bead
5039POP
7/16” x 5/8” - RL
Poplar
M&M#
Rake/Glass Bead
147
1/2” x 9/16” - RL
Solid Pine
148
3/8” x 3/8” - RL
Solid Pine
47
Moulding Selection Guide
Brickmould & Lattice
Corners, Squares & Mullions
Corners are used to protect the outside edges of the wall from damage and abrasion.
Corners come in a wide variety of sizes and detailing.
A Brickmould is used as exterior casing around
doors. 2 inches is the most common size, however,
1-1/2 and 1-1/4 inch sizes are available.
Squares and Parting Beads are used in a wide range of applications including filling gaps
and transitioning heights. This profile may also be used in a variety of craft projects.
M&M#
Mullion Casing
972
3/8” x 2” - RL
Moulding Selection Guide
A Lattice is a thin strip of flat moulding commonly
used to hide seams and trim edges. It is available
in a multitude of widths and is useful for a wide
variety of projects.
M&M#
Corner Bead
204
1-1/4” x 1-1/4” - RL & 8´ Solid Pine
205O
205POP
205
1-1/16” x 1-1/16” - RL Oak
1-1/16” x 1-1/16” - RL Poplar
1-1/16” x 1-1/16” - RL & 8´ Solid Pine
206
3/4” x 3/4” - RL & 8´
Solid Pine
Solid Pine
M&M#
Stop
249MAPF07 3/4” x 1-5/8” - RL
249OF07 3/4” x 1-5/8” - RL
249POPF07 3/4” x 1-5/8” - RL
Solid Pine
Oak
Poplar
M&M#
Brickmould
PVC180-18 1-1/4” x 2” - 18’
M&M#
Stop
251LP
11/16” x 1-3/8” - 16´
M&M#
Parting Stop
254
254O
1/2” x 3/4” - RL - 8´
1/2” x 3/4” - 7´
FJ Pine Primed
PVC
Solid Pine
Maple
M&M#
Baluster
239
3/4” x 3/4” - RL
Solid Pine
Flooring Accessories
ALL SIZES NOMINAL
48
M&M#
Nosing for 3/4˝ floor
M&M#
Spline
1060GO
1 x 3-1/2” - RL
1SPO
1/4” x 1/2” - 3´ - 5´
Oak
Oak
M&M#
Brickmould
180P
180
180FJF17
1-1/4” x 2” - 17’ & 10´ FJ Pine Primed
1-1/4” x 2” - RL
Solid Pine
1-1/4” x 2” - 17’
Raw FJ Pine
M&M#
Lattice
259MAP
259POP
1/4” x 5-1/2” - RL
1/4” x 5-1/2” - RL
Maple
Poplar
260O
260POP
260
1/4” x 5-1/2” - RL
1/4” x 5-1/2” - RL
1/4” x 5-1/2” - RL
Oak
Poplar
Solid Pine
261POP
1/4” x 5-1/2” - RL
Poplar
262
1/4” x 2-1/2” - RL
Solid Pine
264O
264POP
264
264PRI
3/16” x 2” - RL
3/16” x 2” - RL
1/4” x 2” - RL
1/4” x 2” - 16´
Oak
Poplar
Solid Pine
FJ Pop Primed
265
1/4” x 1-3/4” - RL & 8´ Solid Pine
267
267LMAPF07
267LPOPF07
267LOF07
1/4” x 1-3/8” - RL & 8´
1/4” x 1-3/8” - 7´
1/4” x 1-3/8” - 7´
1/4” x 1-3/8” - 7´
268
1/4” x 1-1/8” - RL & 8´ Solid Pine
Solid Pine
Maple
Poplar
Oak
49
Moulding Selection Guide
Moulding Selection Guide
Miscellaneous Profiles
Quarter, Half & Full Rounds
These profiles have a variety of uses.
ALL SIZES NOMINAL
Quarter Rounds come in several sizes and serve a variety of functions.
They are most often used with baseboards.
A cross section of a Half Round looks like a half circle and is used primarily
as decorative trim. It works well as a trim piece for wall paper or to add
a decorative pattern to flat panels. This profile can also be used to put a
rounded edge on various shelving.
Full Rounds are used for numerous purposes and projects. Some of the
more common uses are closet poles, curtain rods and towel rods.
ALL SIZES NOMINAL
M&M#
Quarter Round
106O
3/4˝ x 3/4˝ - RL
Oak
M&M#
Base Shoe
126O
126POP
126MAP
126P
126CE
126
1/2” x 3/4” - RL
1/2” x 3/4” - RL
1/2” x 3/4” - RL
1/2” x 3/4” - 16’
7/16” x 11/16” - 14’
1/2” x 3/4” - RL + 8´
Oak
Poplar
Maple
FJ Pine Primed
P/E Chesapeake
Solid Pine
9601PRI
1/2” x 3/4” - 16’
FJ Pop Primed
129P
129
7/16˝ x 11/16˝ - 16´
7/16˝ x 11/16˝ - RL
FJ Pine Primed
Solid Pine
M&M#
Quarter Round
103
1-1/16” x 1-1/16” - RL Solid Pine
105POP
105
3/4” x 3/4” - RL
3/4” x 3/4” - RL & 8´
106P
106
11/16” x 11/16”-16´
FJ Pine Primed
11/16” x 11/16”-RL & 8´ Solid Pine
108
1/2” x 1/2” - RL + 8´
Solid Pine
110
1/4” x 1/4” - RL & 8´
Solid Pine
M&M#
Half Round
120
1/2” x 1” - RL
2448HRPOP 3/4” x 1-1/2” - RL
50
Base Shoe
9602PRI
3/4” x 13/16” - 16’
FJ Pop Primed
Picture Mould
273L
5/8” x 1-1/4” - RL
Solid Pine
Poplar
Solid Pine
M&M#
Window Stool
7POPWC
1-1/4” x 1-5/8” - RL
M&M#
Flat Astragal
133
11/16” x 1-3/4” - RL
Solid Pine
Poplar
M&M#
Shingle Mould
210P
11/16” x 1-5/8” - 16’
FJ Pine Primed
M&M#
Shelf Cleat
990LFJ
9/16” x 1-9/16” - 16’
M&M#
Window Stool
1164
1-1/16” x 3” - RL
FJ Pine Raw
Solid Pine
Poplar
M&M#
M&M#
M&M#
M&M#
Full Round
233H
233
1-5/16” Diameter - RL + 8´ Hemlock
1-5/16” Diameter - RL + 8´ Solid Pine
M&M#
Window Stool
1153
11/16” x 3-3/16” - RL
Solid Pine
Solid Pine
Flat Stool
1021J
11/16” x 5-1/4” - RL
1020FJPF14 1˝ x 5-1/4˝ - 14 ´- RL
FJ Pine Jesso
FJ Poplar Raw
51
Moulding Selection Guide
Interior Jambs
Miscellaneous Profiles
These profiles have a variety of uses.
ALL SIZES NOMINAL
Poplar
M&M#
T-Astragal (1-3/4˝ Door)
1304F07
1-1/4” x 2-1/4” - 7’
1304POPF08 1-1/4” x 2-1/4” - 8’
M&M#
Screen Mould - Beaded
144
1/4” x 3/4” - RL
M&M#
Chamfer Strip
995
3/4” x 3/4” - RL
Solid Pine
Poplar
M&M#
T-Astragal (1-3/8˝ Door)
1305F07
1-3/16” x 2” - 7’
Solid Pine
1305F08
1-3/16” x 2” - 8’
1305OF08 1-1/8” x 2” - 8’
1305POPF08 1-1/8” x 2” - 8’
Solid Pine
Oak
Poplar
Solid Pine
Solid Pine
Accessories
These profiles have a variety of uses.
ALL SIZES NOMINAL
M&M#
Rosette
R740CBPOP
27/32” x 4-1/2” x 4-1/2”
Poplar
R755CBPOP
1-1/8” x 5-1/2” x 5-1/2”
Poplar
M&M#
Rosette
R761CBO
R761CBPOP
27/32” x 2-5/8” x 2-5/8”
27/32” x 2-5/8” x 2-5/8”
Oak
Poplar
R734CBO
R734CBPOP
27/32” x 3-1/2” x 3-1/2”
27/32” x 3-1/2” x 3-1/2”
Oak
Poplar
R789CBO
R789CBPOP
27/32” x 3-3/4” x 3-3/4”
27/32” x 3-3/4” x 3-3/4”
Oak
Poplar
52
X
X
X
FJ Pine Jesso
X
Solid Poplar
X
X
FJ Primed Poplar
X
X
Ultralite MDF
X
Chesapeake Oak
X
Oak Veneer WVWC
X
Oak Veneer WV
X
X
X
X
X
X
6-7/8” x 8’
97” BD
FJ Primed Pine
6-7/8” x 6/8’
81” BD
Oak
6-9/16” x 8’
97” BD
5/16” x 3/4”- RL
6-9/16” x 6/8’
81” BD
142O
*BD-Below Dado
*WC-Wood Core
*EV-Edge Veneer
*WV-Wrap Veneer
*OT-Pre-finish Teak
*OB-Pre-finish Brown
5-1/4” Lineal
Solid Pine
Maple
Poplar
5” x 8’
97” BD
1/4” x 3/4” - RL + 8´
1/4” x 3/4” - RL + 8´
1/4” x 3/4” - RL + 8´
4-7/8” x 6/8’
81” BD
(4-13/16)
4-7/8” x 7’
85” BD
(4-13/16)
4-7/8” x 8’
97” BD
(4-13/16)
142
142MAP
142POP
5” x 6/8’
81” BD
3/8” x 3/4” - RL
Screen Mould
4-9/16” Lineal
137POP
Interior Jambs are available in a variety of species and profiles including flat and rabbeted jamb.
M&M#
4-9/16” x 8’
97” BD (4-5/8)
Screen/Shelf Mould
ALL SIZES NOMINAL
4-9/16” x 6/8’
81” BD (4-5/8)
M&M#
Moulding Selection Guide
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Maple Veneer
Pine WVWC
X
Pine WV
X
FJ Primed Pine Splits
X
Applied Stop Jamb FJP
X
X
Please call Moulding & Millwork to inquire for price and availability of all items listed, core specifications or access to sku’s not shown. Moulding & Millwork has a wide
array of jamb styles and it is likely we have the jamb you require for your specific application in stock. If we do not, we can access the profile and species you require
from our manufacturing and distribution system.
M&M#
Rosette
RCB3BO
RCB3BPOP
1-1/16” x 3-1/2” x 3-1/2”
1-1/16” x 3-1/2” x 3-1/2”
Oak
Poplar
RCB334BPOP
1-1/16” x 3-3/4” x 3-3/4”
Poplar
RCB44B
RCB44BPOP
1-1/16” x 4” x 4”
1-1/16” x 4” x 4”
Pine
Poplar
INTERIOR JAMBS
Dado depths vary 5/16˝ or 3/8˝
END VIEW
DADO DETAIL
SINGLE EDGE RABBET
SPLIT JAMBS
M&M#
Plinth Block
PB742O
PB742POP
1-1/16” x 6-1/2” x 3-1/2” Oak
1-1/16” x 6-1/2” x 3-1/2” Poplar
PB743O
PB743POP
1-1/16” x 8” x 4-1/2”
1-1/16” x 8” x 4-1/2”
PB795POP
1-1/16” x 9-1/4” x 5-1/2” Poplar
PB816O
PB816POP
1-1/16” x 6-1/2” x 3-3/4” Oak
1-1/16” x 6-1/2” x 3-3/4” Poplar
M&M#
Base Corner Block - Inside
BBI7O
BBI7POP
1-1/16” x 1-1/16” x 7”
1-1/16” x 1-1/16” x 7”
BBI10POP
1-1/16” x 1-1/16” x 10” Poplar
Oak
Poplar
1-5/16˝
2º
1-7/16˝
11/16˝
3/8˝
Oak
Poplar
1/4˝
1/4˝
11/16˝
1/4˝
5/16˝
11/16˝
3/8˝
1-7/16˝
1-1/16˝
15/16˝
2-3/4˝
M&M#
Base Corner Block - Outside
BBO7POP
1-1/16” x 1-1/16” x 7”
BBO10POP
1-1/16” x 1-1/16” x 10” Poplar
Poplar
COMBINATION JAMBS
STOP APPLIED
53
Moulding Selection Guide
Finish Lumber (S4S)
Index
Finish boards come in S4S (surfaced four sides) and are used for
a multitude of purposes including shelving, window liner, bases,
casing, etc.
ALL SIZES NOMINAL
Solid Radiata Pine
M&M #
SIZE
DIMENSION
LENGTH
U/M
248L
1x2
21/32˝ x 1-3/4˝
RL 8´ - 16´
LF
14S4S
1x4
3/4˝ x 3-1/2˝
RL 8´ - 16´ & Spec
LF
16S4S
1x6
3/4˝ x 5-1/2˝
RL 8´ - 16´ & Spec
LF
FJ Raw Poplar
M&M #
SIZE
DIMENSION
LENGTH
U/M
16S4SFJP
1x6
3/4˝ x 5-1/2˝
10´ - 16´ Evens
EA
18S4SFJP
1x8
3/4˝ x 7-1/4˝
12´ - 16´ Evens
EA
112S4SFJP
1 x 12
3/4˝ x 11-1/4˝
16´ Evens
EA
112S4SFJPF18
1 x 12
3/4˝ x 11-1/4˝ x 18
18´
EA
1-1/16˝ x 11-1/4˝ x 16
16´
EA
5412S4SFJPF16 5/4 x 12
Solid Poplar
18S4S
1x8
3/4˝ x 7-1/4˝
RL 8´ - 16´ & Spec
LF
110S4S
1 x 10
3/4˝ x 9-1/4˝
RL 8´ - 16´ & Spec
LF
M&M #
SIZE
DIMENSION
LENGTH
U/M
112S4S
1 x 12
3/4˝ x 11-1/4˝
RL 8´ - 16´ & Spec
LF
12S4SPOP
1x2
3/4˝ x 1-3/4˝
RL 8´ - 16´
LF
546S4S
5/4 x 6
1-1/8˝ x 5-1/2˝
RL 8´ - 16´
LF
13S4SPOP
1x3
3/4˝ x 2-1/2˝
RL 8´ - 16´
LF
5412S4S
5/4 x 12
1-1/8˝ x 11-1/4˝
RL 8´ - 16´
LF
14S4SPOP
1x4
3/4˝ x 3-1/2˝
RL 8´ - 16´ & Spec
LF
16S4SPOP
1x6
3/4˝ x 5-1/2˝
RL 8´ - 16´ & Spec
LF
17E2EPOP
1x7
3/4˝ x 6-1/2˝
RL 8´ - 16´ & Spec
LF
18S4SPOP
1x8
3/4˝ x 7-1/4˝
RL 8´ - 16´ & Spec
LF
U/M
110S4SPOP
1 x 10
3/4˝ x 9-1/4˝
RL 8´ - 16´ & Spec
LF
1 x 12
3/4˝ x 11-1/4˝
RL 8´ - 16´ & Spec
LF
5/4 x 6
1-1/16˝ x 5-1/2˝
RL 8´ - 16´
LF
LF
FJ Primed Pine
M&M #
SIZE
DIMENSION
LENGTH
248LP
1x2
21/32˝ x 1-3/4˝
16´
LF
112S4SPOP
14S4SP
1x4
23/32˝ x 3-1/2˝
16´
LF
546S4SPOP
16S4SP
1x6
23/32˝ x 5-1/2˝
16´
LF
548S4SPOP
5/4 x 8
1-1/16˝ x 7-1/4˝
RL 8´ - 16´
LF
5410S4SPOP
5/4 x 10
1-1/16˝ x 9-1/4˝
RL 8´ - 16´
LF
5/4 x 12
1-1/16˝ x 11-1/4˝
RL 8´ - 16´
LF
18S4SP
1x8
23/32˝ x 7-1/4˝
16´
110S4SP
1 x 10
23/32˝ x 9-1/4˝
16´
LF
5412S4SPOP
112S4SP
1 x 12
23/32˝ x 11-1/4˝
16´
LF
126S4SPOP
1/2 x 6
1/2˝ x 5-1/2˝
RL 8´ - 16´
LF
128S4SPOP
1/2 x 8
1/2˝ x 7-1/4˝
RL 8´ - 16´
LF
1212S4SPOP
1/2 x 12
1/2˝ x 11-1/4˝
RL 8´ - 16´
LF
FJ Primed Pine XP
M&M #
SIZE
DIMENSION
LENGTH
U/M
12S4SXP
1x2
23/32˝ x 1-1/2˝
16´
LF
14S4SXP
1x4
23/32˝ x 3-1/2˝
16´
LF
16S4SXP
1x6
23/32˝ x 5-1/2˝
16´
LF
18S4SXP
1x8
23/32˝ x 7-1/2˝
16´
LF
112S4SXP
1 x 12
23/32˝ x 11-1/4˝
16´
LF
544S4SXP
5/4 x 4
1-1/16˝ X 3-1/2˝
16´
LF
546S4SXP
5/4 x 6
1-1/16˝ X 5-1/2˝
16´
LF
548S4SXP
5/4 x 8
1-1/16˝ X 7-1/4˝
16´
LF
5412S4SXP
5/4 x 12
1-1/16˝ X 11-1/4˝
16´
LF
MDF
M&M #
SIZE
DIMENSION
LENGTH
U/M
14E2EM
1x4
3/4˝ x 3-1/2˝ (18mm)
16´
LF
14S4SM
1x4
3/4˝ x 3-1/2˝ (18mm)
16´
LF
16E2EM
1x6
3/4˝ x 5-1/2˝ (18mm)
16´
LF
16S4SM
1x6
3/4˝ x 5-1/2˝ (18mm)
16´
LF
18E2EM
1x8
3/4˝ x 7-1/4˝ (18mm)
16´
LF
18S4SM
1x8
3/4˝ x 7-1/4˝ (18mm)
16´
LF
110S4SM
1 x 10
3/4˝ x 9-1/4˝ (18mm)
16´
LF
112S4SM
1 x 10
3/4˝ x 11-1/4˝ (18mm)
16´
LF
FJ Primed Poplar
54
Moulding Selection Guide
M&M #
SIZE
DIMENSION
LENGTH
12LS4SPRIF07
1x4
3/4˝ x 3-1/2˝
7´
LF
13LS4SPRI
1x3
11/16˝ x 2-5/8˝
12´ & 16´
LF
U/M
Solid Red Oak/Oak Veneer
M&M #
SIZE
DIMENSION
LENGTH
U/M
14S4SO
1x4
3/4˝ x 3-1/2˝
RL 6´ - 16´
LF
16S4SO
1x6
3/4˝ x 5-1/2˝
RL 6´ - 16´
LF
18S4SO
1x8
3/4˝ x 7-1/4˝
RL 6´ - 16´
LF
110S4SO
1 x 10
3/4˝ x 9-1/4˝
RL 6´ - 16´
LF
112S4SO
1 x 12
3/4˝ x 11-1/4˝
RL 6´ - 16´
LF
112S4SOVF16
1 x 12
3/4˝ x 11-1/4˝ - 16´
16´
EA
Chesapeake Embossed
M&M #
SIZE
DIMENSION
LENGTH
U/M
16E4ECE
1x6
21/32˝ x 5-1/2˝
14´
LF
18E4ECE
1x8
21/32˝ x 7-1/4˝
14´
LF
110E4ECE
1 x 10
21/32˝ x 9-1/4˝
14´
LF
6LAV
7PM
18
18M112ULCA
Spline
1/4˝ x 1/2˝
1SP
Casing
3/4˝ x 3-1/2˝
Panel Mould
11/16˝ x 2˝
13/16˝ x 2-1/8˝
Crown
3/4˝ x 5-1/4˝
Panel Mould
3/4˝ x 2-3/4˝
Window Stool
1-1/4˝ x 1-5/8˝
Base Cap
5/8˝ x 1-7/16˝
Casing
3/4˝ x 3-1/2˝
pg 48
pg 12
pg 44
pg 36
pg 44
pg 51
pg 28
pg 9
37CC
4AV
40
6PM
41
43
45
7WC
45L
47
47L
Crown
5/8˝ x 5˝
Crown
5/8˝ x 4-1/4˝
Crown
1-3/16˝ x 6-5/16˝
Crown
1˝ x 6-15/16˝
Crown
3/4˝ x 5-1/4˝
Crown
9/16˝ x 5-1/4˝
5/8˝ x 5-1/4˝
9/16˝ x 5-3/16˝
Crown
5/8˝ x 4-5/8˝
Crown
11/16˝ x 4-9/16˝
9/16˝ x 4-9/16˝
pg 38
pg 29
pg 29
pg 35
pg 31
pg 34
pg 34
pg 34
48L
49
49L
51L
52
54
54L
Crown
11/16˝ x 4-1/4˝
48
Crown
9/16˝ x 4-1/4˝
5/8˝ x 4-1/4˝
Crown
5/8˝ x 3-5/8˝
3/4˝ x 3-5/8˝
Crown
9/16˝ x 3-5/8˝
Crown
1/2˝ x 3-1/4˝
5/8˝ x 3-1/4˝
9/16˝ x 3-1/4˝
Crown
9/16˝ x 2-3/4˝
Crown
9/16˝ x 2-1/4˝
Crown
1/2˝ x 2-1/4˝
pg 34
pg 34
pg 31
pg 31
pg 34
pg 35
pg 35
pg 31
60
61
68L
74
75
84L
85
Handrail
1-3/4˝ x 2-1/4˝
55
Crown
9/16˝ x 1-3/4˝
Baseboard
1/2˝ x 4-1/4˝
Crown
7/16˝ x 1-5/8˝
Crown
9/16˝ x 1-3/4˝
Crown
9/16˝ x 1-5/8˝
Cove
9/16˝ x 2-1/4˝
Cove
9/16˝ x 1-3/4˝
pg 46
pg 31
pg 24
pg 35
pg 31
pg 31
pg 40
pg 40
86
90
90
93
96L
97
100
101
Cove
9/16˝ x 1-5/8˝
Cove
11/16˝ x 1-1/8˝
Crown
3/4˝ x 7˝
Cove
3/4˝ x 3/4˝
Cove
1/2˝ x 3/4˝
Casing
1˝ x 3-1/2˝
Cove
11/16˝ x 11/16˝
Cove
1/2˝ x 1/2˝
pg 40
pg 40
pg 37
pg 40
pg 40
pg 9
pg 40
pg 40
103
104-CR
105
106
106
108
110
120
Quarter Round
1-1/16˝ x 1-1/16˝
Crown
3/4˝ x 2-1/4˝
Quarter Round
3/4˝ x 3/4˝
Quarter Round
3/4˝ x 3/4˝
Quarter Round
11/16˝ x 11/16˝
Quarter Round
1/2˝ x 1/2˝
Quarter Round
1/4˝ x 1/4˝
Half Round
1/2˝ x 1˝
pg 50
pg 32
pg 50
pg 50
pg 50
pg 50
pg 50
pg 50
126
129
133
134
137
140
140TC
142
Base Shoe
1/2˝ x 3/4˝
7/16˝ x 11/16˝
Base Shoe
7/16˝ x 11/16˝
Flat Astragal
11/16˝ x 1-3/4˝
Panel Mould
5/8˝ x 1-1/4˝
Screen Mould
3/8˝ x 3/4˝
Panel Mould
7/16˝ x 1-1/4˝
Crown Enhancer
1˝ x 2-1/8˝
Screen Mould
5/16˝ x 3/4˝
1/4˝ x 3/4˝
pg 50
pg 50
pg 51
pg 42
pg 52
pg 42
pg 39
pg 52
144
147
148
Screen Mould
1/4˝ x 3/4˝
Glass Bead
1/2˝ x 9/16˝
Glass Bead
3/8˝ x 3/8˝
Crown Enhancer
1-3/4˝ x 2-1/4˝
pg 52
pg 47
pg 47
pg 39
166L
167
180
150TCL
182
163
163E
163E-7
Base Cap
3/4˝ x 1-3/8˝
11/16˝ x 1-3/8˝
Baseboard
5/8˝ x 5-1/4˝
Baseboard
5/8˝ x 7-1/4˝
Base Cap
11/16˝ x 1-1/8˝
5/8˝ x 1-1/4˝
pg 28
pg 20
pg 20
pg 28
184
185
185Y
166
190DH
Base Cap
11/16˝ x 1-1/4˝
Base Cap
11/16˝ x 1-1/8˝
Brickmould
1-1/4˝ x 2˝
Panel Mould
11/16˝ x 1-5/8˝
Panel Mould
1/2˝ x 1-1/2˝
Panel Mould
7/16˝ x 1-3/8˝
9/16˝ x 1-1/2˝
Panel Mould
5/16˝ x 1-1/4˝
Architrave
1-1/16˝ x 5-1/4˝
pg 28
pg 28
pg 49
pg 42
pg 42
pg 42
pg 42
pg 18
200PM
200WC
194
200CH
203CH
204
205
206
Casing
5/8˝ x 3-3/16˝
Chair Rail Backer
11/16˝ x 4-1/4˝
Base Cap
3/4˝ x 1-9/16˝
Pediment
3/4˝ x 2˝
Chair Rail
11/16˝ x 2-3/8˝
Corner Bead
1-1/4˝ x 1-1/4˝
Corner Bead
1-1/16˝ x 1-1/16˝
Corner Bead
3/4˝ x 3/4˝
pg 12
pg 41
pg 28
pg 19
pg 41
pg 48
pg 48
pg 48
Solid Hard Maple/Maple Veneer
M&M #
SIZE
DIMENSION
LENGTH
U/M
14S4SMAP
1x4
3/4˝ x 3-1/2˝
RL 6´ - 16´
LF
207
16S4SMAP
1x6
3/4˝ x 5-1/2˝
RL 6´ - 16´
LF
Baseboard
5/8˝ x 7-1/4˝
Shingle Mould
11/16˝ x 1-5/8˝
Casing
3/4˝ x 3-1/2˝
11/16˝ x 3-1/2˝
Wall Rail
1-1/2˝ x 1-11/16˝
1-7/16˝ x 1-5/8˝
Full Round
1-5/16˝ Diam.
Baluster
3/4˝ x 3/4˝
Wall Rail
1-1/16˝ x 2-1/4˝
1-1/4˝ x 2-1/4˝
Stop
3/4˝ x 1-5/8˝
pg 20
pg 51
pg 8
pg 46
pg 50
pg 48
pg 46
pg 48
18S4SMAP
1x8
3/4˝ x 7-1/4˝
RL 6´ - 16´
LF
110S4SMAP
1 x 10
3/4˝ x 9-1/4˝
RL 6´ - 16´
LF
112S4SMAP
1 x 12
3/4˝ x 11-1/4˝
RL 6´ - 16´
LF
112S4SMVF16
1 x 12
3/4˝ x 11-1/4˝ x 16´
16´
EA
112S4SFJM16
1 x 12
3/4˝ x 11-1/4˝ x 16´
16´
EA
Cherry
14S4SPRI
1x4
3/4˝ x 3-1/2˝
12´ & 16´
LF
M&M #
16S4SPRI
1x6
3/4˝ x 5-1/2˝
12´ & 16´
LF
14S4SC
1x4
3/4˝ x 3-1/2˝
RL 6´
LF
17E2EPRI
1x7
3/4˝ x 6-1/2˝
16´
LF
16S4SC
1x6
3/4˝ x 5-1/2˝
RL 6´
LF
18S4SPRI
1x8
3/4˝ x 7-1/4˝
12´ & 16´
LF
18S4SC
1x8
3/4˝ x 7-1/4˝
RL 6´
LF
110S4SPRI
1 x 10
3/4˝ x 9-1/4˝
16´
LF
110S4SC
1 x 10
3/4˝ x 9-1/4˝
RL 6´
LF
112S4SPRI
1 x 12
3/4˝ x 11˝- 1/4˝
12´ & 16´ & 18´
EA
112S4SC
1 x 12
3/4˝ x 11-1/4˝
RL 6´
LF
251L
210
215
231
233
239
240
264
249
254
259
260
261
262
Stop
11/16˝ x 1-3/8˝
Parting Stop
1/2˝ x 3/4˝
Lattice
1/4˝ x 5-1/2˝
Lattice
1/4˝ x 5-1/2˝
Lattice
1/4˝ x 5-1/2˝
Lattice
1/4˝ x 2-1/2˝
Lattice
3/16˝ x 2˝
1/4˝ x 2˝
Lattice
1/4˝ x 1-3/4˝
pg 48
pg 48
pg 49
pg 49
pg 49
pg 49
pg 49
pg 49
265
SIZE
DIMENSION
LENGTH
U/M
267
267L
268
292L
309PT
Lattice
1/4˝ x 1-3/8˝
Lattice
1/4˝ x 1-3/8˝
Lattice
1/4˝ x 1-1/8˝
Picture Mould
5/8˝ x 1-1/4˝
Backband
11/16˝ x 1˝
Backband
1-1/8˝ x 1-9/16˝
Ply Cap
5/8˝ x 1-1/8˝
Panel Mould
5/8˝ x 1-1/2˝
pg 49
pg 49
pg 49
pg 51
pg 19
pg 19
pg 44
pg 43
273L
273L
280
282
55
Moulding Selection Guide
Index
Moulding Selection Guide
Index
313
313B
327H
329L
330
943L
945
946
950L
953L
Door Stop
11/16˝ x 1-5/8˝
Door Stop
11/16˝ x 1-3/8˝
Casing
11/16˝ x 2-1/4˝
324
Casing
7/16˝ x 2-1/4˝
Casing
11/16˝ x 2-1/4˝
Casing
9/16˝ x 2-1/4˝
Casing
9/16˝ x 2-3/4˝
Casing
1/2˝ x 2-3/4˝
Door Stop
3/8˝ x 2-1/8˝
Door Stop
3/8˝ x 1-5/8˝
Door Stop
3/8˝ x 1-3/8˝
Door Stop
3/8˝ x 1-1/4˝
5/16˝ x 1-3/16˝
Door Stop
3/8˝ x 7/8˝
3/8˝ x 27/32˝
Pediment
3/8˝ x 1-3/8˝
Mullion Casing
3/8˝ x 2˝
Door Stop
3/8˝ x 1-3/8˝
pg 45
pg 45
pg 11
pg 11
pg 10
pg 11
pg 11
pg 11
pg 46
pg 46
pg 46
pg 46
pg 46
pg 19
pg 48
pg 45
332
348
Casing
11/16˝ x 2-1/4˝
Panel Mould
3/4˝ x 9/16˝
Casing
9/16˝ x 2-1/2˝
11/16˝ x 2-1/2˝
Casing
9/16˝ x 2-3/4˝
pg 14
pg 43
pg 6
pg 6
358
356
356LC
356S
356X
Casing
11/16˝ x 2-1/4˝
5/8˝ x 2-1/4˝
Casing
7/16˝ x 2-1/4˝
Casing
7/16˝ x 2-1/4˝
9/16˝ x 2-1/4˝
Casing
9/16˝ x 2-1/4˝
Shelf Cleat
9/16˝ x 1-9/16˝
Chamfer Strip
3/4˝ x 3/4˝
Panel Mould
3/8˝ x 1-1/8˝
Casing
3/4˝ x 3˝
pg 6
pg 6
pg 6
pg 6
pg 51
pg 52
pg 42
pg 6
1060G
995
1153
1002
1164
1015
974
1016
1020
Casing
3/4˝ x 3-1/2˝
Backband
3/4˝ x 1˝
Flat Stool
1˝ x 5-1/4˝
Flat Stool
11/16˝ x 5-1/4˝
pg 10
pg 19
pg 51
pg 51
367
367S
368
385
1305
1648
Casing
5/8˝ x 3-1/4˝
Casing
1/2˝ x 2-1/4˝
Casing
5/8˝ x 2-1/2˝
Chair Rail
5/8˝ x 2-1/2˝
11/16˝ x 2-5/8˝
Nosing
1˝ x 3-1/2˝
Panel Mould
11/16˝ x 1-1/4˝
Window Stool
11/16˝ x 3-3/16˝
Window Stool
1-1/16˝ x 3˝
T Astragal
1-1/4˝ x 2-1/4˝
T Astragal
1-1/8˝ x 2˝
1-3/16˝ x 2˝
Panel Mould
1/2˝ x 1-1/2˝
Panel Mould
9/16˝ x 1-7/16˝
pg 6
pg 7
pg 7
pg 14
pg 14
pg 7
pg 15
pg 41
pg 48
pg 43
pg 51
pg 51
pg 52
pg 52
pg 42
pg 43
412
413L
421
427
430
2010
2014
2244-B-CA
2288CH
Casing
3/4˝ x 3˝
Baseboard
5/8˝ x 4-1/4˝
Casing
3/4˝ x 3-1/4˝
Casing
3/4 x 2-3/4˝
Casing
3/4˝ x 3-1/4˝
Panel Mould
9/16˝ x 1-1/8˝
Baseboard
5/8˝ x 4-1/4˝
Baseboard
9/16˝ x 5-1/4˝
7/16˝ x 5-7/16˝
Base Cap
9/16˝ x 1-5/8˝
7/16˝ x 1-3/4˝
Baseboard
7/16˝ x 4-1/4˝
Cove
5/8˝ x 3/4˝
Base Cap
21/32˝ x 1-1/2˝
Crown
11/16˝ x 5-1/4˝
Base Cap
11/16˝ x 1-3/8˝
Chair Rail
11/16˝ x 2-3/4˝
pg 41
pg 15
pg 21
pg 10
pg 10
pg 10
pg 43
pg 24
pg 24
pg 24
pg 24
pg 40
pg 28
pg 36
pg 28
pg 41
2153
430L
430S
432
431
432L
433
433L
2424R
2448BM
2448HR
2464PM
2480CB
2488-CA
2496
Baseboard
5/8˝ x 5-1/2˝
Baseboard
1/2˝ x 4-1/4˝
Casing
9/16˝ x 3-1/2˝
1/2˝ x 3-1/2˝
Baseboard
3/8˝ x 4-1/4˝
Baseboard
9/16˝ x 5-1/2˝
Casing
15/32˝ x 3-1/2˝
Casing
9/16˝ x 3-1/4˝
Baseboard
1/2˝ x 3-1/4˝
Glass Bead
23/32˝ x 23/32˝
Ply Cap
3/4˝ x 3/4˝
Panel Mould
3/4˝ x 1-1/2˝
Half Round
3/4˝ x 1-1/2˝
Ply Cap
3/4˝ x 2˝
Crown Enhancer
11/16˝ x 2-1/2˝
3/4˝ x 2-1/2˝
Casing
3/4˝ x 2-3/4˝
11/16˝ x 2-3/4˝
Casing
11/16˝ x 3˝
3/4˝ x 3˝
pg 24
pg 24
pg 10
pg 24
pg 24
pg 10
pg 10
pg 24
pg 47
pg 44
pg 42
pg 50
pg 44
pg 39
pg 13
pg 8
439
449
2502
2664-P
2664-PR
2805
2808
2844BB
2813
Casing
5/8˝ x 3-7/16˝
Casing
5/8˝ x 3-1/4˝
11/16˝ x 3-1/2˝
Casing
11/16˝ x 3-1/4˝
5/8˝ x 3-1/4˝
Casing
11/16˝ x 3-1/4˝
Casing
11/16 x 3-1/4˝
Casing
3/4 x 3-1/4˝
Casing
11/16˝ x 3-1/4˝
Casing
3/4˝ x 3-1/2˝
Dentil
11/16˝ x 7/8˝
Dentil
1/2˝ x 5/8˝
Base Cap
13/16˝ x 2˝
Ply Cap
13/16˝ x 2˝
Baseboard
9/16˝ x 3-1/4˝
Baseboard
7/16˝ x 4-1/4˝
9/16˝ x 4-1/4˝
Backband
7/8˝ x 1-3/8˝
Baseboard
7/16˝ x 5-1/4˝
9/16˝ x 5-1/4˝
pg 7
pg 6
pg 6
pg 6
pg 16
pg 16
pg 7
pg 7
pg 39
pg 39
pg 28
pg 44
pg 25
pg 25
pg 19
pg 25
449
444
444L
444N
445
445L
456CE
462
472
473 & 473L
3264-PR
3436-BB
3454TVG
3652-BB
3834TVG
Casing
5/8˝ x 2-1/4˝
Panel Mould
1/2˝ x 1˝
Casing
5/8˝ x 2-1/2˝
9/16˝ x 2-1/2˝
Casing
5/8˝ x 2-1/4˝
Architrave
11/16˝ x 3-1/2˝
Casing
3/8˝ x 2-7/16˝
Crown
1˝ x 7˝
Ply Cap
1˝ x 2˝
Backband
1-1/16˝ x 1-1/8˝
Wainscot
3/4˝ x 5-3/8˝
Backband
1-1/8˝ x 1-5/8˝
Wainscot
3/8˝ x 3˝
Crown
11/16˝ x 6-11/16˝
Bar Rail
1-1/4˝ x 3˝
Casing
3/4˝ x 3-1/4˝
pg 14
pg 6
pg 43
pg 10
pg 10
pg 18
pg 10
pg 36
pg 44
pg 19
pg 47
pg 19
pg 47
pg 35
pg 43
pg 8
526
535
545
554
Architrave
Casing
3/4˝
1˝
x 3-1/2˝
x 3-1/2˝
1-1/16˝ x 3-1/2˝
Baseboard
5/8˝ x 5-1/4˝
Baseboard
3/4˝ x 3-1/2˝
Baseboard
5/8˝ x 5˝
Baseboard
1/2˝ x 4-1/2˝
pg 17
8
pg 20
pg 8
pg 20
pg 25
584TVG
492
505
2504
Casing
11/16˝ x 3-1/2˝
535
523
480K
448
2323B
2148-CB
1846
Chair Rail
5/8˝ x 2-1/2˝
432L
2024
1304
1021
Casing
3/4˝ x 2-1/4˝
2009
1148
989
972
Casing
11/16˝ x 2-1/4˝
5/8˝ x 2-1/4˝
420
390
990L
947
Casing
5/8˝ x 3-1/4˝
411
366
355
327
Casing
9/16˝ x 2-11/16˝
390L
360L
351
324L
4800
5006
5010
5012
5030
4009
5039
4096
5834
4596
618
620
Wainscot
9/16˝ x 3-5/16˝
9/16˝ x 3-1/4˝
Baseboard
1/2˝ x 5-1/4˝
9/16˝ x 5-1/4˝
Baseboard
7/16˝ x 4-1/4˝
9/16˝ x 4-1/4˝
Crown
13/16˝ x 7˝
Chair Rail
13/16˝ x 2-1/2˝
Architrave
1-3/16˝ x 4-1/4˝
Cove
3/4˝ x 3/4˝
Architrave
1-3/16˝ x 6-1/4˝
Glass Bead
7/16˝ x 5/8˝
Wainscot
5/8˝ x 3˝
Handrail
2-1/4˝ x 2-3/8˝
6010
pg 47
pg 22
pg 22
pg 32
pg 41
pg 17
pg 40
pg 18
pg 47
pg 47
pg 46
620L
622BA
623
633L
634
634L
635
635CE
8063
8263
9000
9021
9022
9023
9024
9025
Baseboard
1/2˝ x 4-1/4˝
Base Cap
3/4˝ x 1-1/2˝
Baseboard
1/2˝ x 3-1/4˝
9/16˝ x 3-1/4˝
Baseboard
7/16˝ x 3-1/4˝
Baseboard
1/2˝ x 3˝
Baseboard
3/8˝ x 3˝
7/16˝ x 3˝
Baseboard
3/8˝ x 2-3/4˝
Baseboard
5/16˝ x 2-3/4˝
Casing
3/4˝ x 3-1/4˝
Baseboard
5/8˝ x 6-1/2˝
Casing
5/8˝ x 2-1/4˝
Casing
3/4˝ x 2-15/16˝
Casing
3/4˝ x 2-3/4˝
Casing
11/16˝ x 2-3/4˝
Casing
3/4˝ x 2-1/2˝
Casing
5/8˝ x 2-1/2˝
pg 22
pg 28
pg 22
pg 22
pg 22
pg 22
pg 22
pg 22
pg 15
pg 21
pg 6
pg 11
pg 9
pg 13
pg 9
pg 10
636S
637S
658
660
663
Baseboard
3/8˝ x 3˝
Baseboard
3/8˝ x 3-1/4˝
Baseboard
9/16˝ x 5-1/4˝
Baseboard
9/16˝ x 4-1/4˝
Baseboard
9/16˝ x 3-1/4˝
1/2˝ x 3-1/4˝
Casing
1˝ x 3-1/4˝
pg 22
pg 22
pg 26
pg 26
pg 26
pg 10
730
682
784
712
713
9027
Crown
3/4˝ x 4-1/2˝
13/16˝ x 4-1/2˝
Baseboard
9/16˝ x 3-1/4˝
Casing
9/16˝ x 2-1/4˝
pg 33
pg 24
pg 10
785
818
9038
9031
9032
9033
Casing
11/16˝ x 3-1/2˝
Architrave
3/4˝ x 3-1/2˝
Casing
3/4˝ x 3-1/2˝
Casing
13/16˝ x 3-1/2˝
Casing
11/16˝ x 3-1/2˝
Casing
13/16˝ x 3-1/2˝
Casing
5/8˝ x 3-1/4˝
pg 9
pg 17
pg 9
pg 8
pg 8
pg 14
pg 6
723/723L
724L
725
726
9041
9053
Baseboard
7/16˝ x 3-1/4˝
Baseboard
7/16˝ x 3˝
Baseboard
3/8˝ x 3˝
Baseboard
3/8˝ x 2-3/4˝
Crown
1-3/16˝ x 10-1/2˝
Crown
11/16˝ x 3-3/4˝
Crown
11/16˝ x 4-5/8˝
Backband
1˝ x 1-1/8˝
Casing
11/16˝ x 3-1/2˝
Casing
1-1/16˝ x 4-1/4˝
Casing
1˝ x 4-1/2˝
pg 24
pg 24
pg 24
pg 24
pg 38
pg 30
pg 29
pg 19
pg 11
pg 8
pg 16
9073
9034
9035
9036
9037
9121
9130
9132
9135
Casing
1-3/8˝ x 4˝
Baseboard
3/8˝ x 2-3/4˝
Baseboard
1/2˝ x 3-1/4˝
Baseboard
3/8˝ x 3-1/4˝
Baseboard
3/8˝ x 4-1/4˝
pg 15
pg 22
pg 22
pg 24
pg 24
830
846
855
857
876
877L
885
887
9140
9141
9142
9143
9144
9151
9152
Crown
3/4˝ x 5-1/2˝
Door Stop
7/16˝ x 1-3/8˝
Door Stop
7/16˝ x 1-5/8˝
Door Stop
3/8˝ x 1-1/4˝
Door Stop
7/16˝ x 1-3/8˝
Door Stop
1/2˝ x 1-1/4˝
Door Stop
3/8˝ x 1-5/8˝
Door Stop
5/16˝ x 1-1/4˝
Baseboard
1/2˝ x 4-1/4˝
Baseboard
5/8˝ x 4-1/4˝
Baseboard
7/16˝ x 4-1/4˝
Baseboard
1/2˝ x 4-1/4˝
Baseboard
3/8˝ x 4-1/4˝
Baseboard
11/16˝ x 4-1/4˝
9145
Baseboard
5/8˝ x 5-1/4˝
Baseboard
5/8˝ x 5-1/4˝
pg 32
pg 45
pg 45
pg 45
pg 45
pg 45
pg 45
pg 45
pg 22
pg 26
pg 25
pg 25
pg 24
pg 24
pg 26
pg 27
887L
890
905L
906
908L
936
937
941L
9153
9157
9158
9171
9172
9230
9241
9245
Door Stop
3/8˝ x 1-1/4˝
3/8˝ x 1-3/16˝
Door Stop
11/32˝ x 7/8˝
Door Stop
7/16˝ x 1-5/8˝
Door Stop
7/16˝ x 1-3/8˝
Casing
5/8˝ x 3-1/4˝
Door Stop
7/16˝ x 1-3/8˝
Door Stop
1/2˝ x 1-1/4˝
7/16˝ x 1-1/4˝
Door Stop
7/16˝ x 3/4˝
Baseboard
7/16˝ x 5-1/4˝
Baseboard
7/16˝ x 5-1/4˝
Baseboard
5/8˝ x 5-1/4˝
Baseboard
5/8˝ x 7-1/4˝
Baseboard
5/8˝ x 7-1/4˝
Crown
1/2˝ x 3-9/16˝
Crown
1/2˝ x 4-1/4˝
Crown
5/8˝ x 4-1/4˝
pg 45
pg 45
pg 45
pg 45
pg 12
pg 46
pg 46
pg 46
pg 25
pg 22
pg 25
pg 26
pg 27
pg 31
pg 34
pg 30
56
57
Moulding Selection Guide
Index
9320
9512
Crown
11/16˝ x 4-1/4˝
9246
Crown
11/16˝ x 5-1/4˝
Crown
5/8˝ x 5-1/4˝
Crown
11/16˝ x 5-1/4˝
Baseboard
3/4˝ x 7-1/16˝
Baseboard
1-3/16˝ x 7-1/4˝
Chair Rail
5/8˝ x 2-5/8˝
Panel Mould
5/8˝ x 1-1/2˝
pg 38
pg 31
pg 34
pg 36
pg 23
pg 23
pg 41
pg 42
9514
9250
9520
9253
9601
9263
9602
9283
9832
9701
Panel Mould
11/16˝ x 1-5/8˝
Panel Mould
9/16˝ x 1-1/2˝
Crown Enhancer
5/8˝ x 2-3/4˝
Base Shoe
1/2˝ x 3/4˝
Base Shoe
3/4˝ x 13/16˝
Casing
11/16˝ x 3-1/4˝
Casing
3/4˝ x 3-1/2˝
Backband
3/4˝ x 13/16˝
pg 42
pg 42
pg 39
pg 50
pg 50
pg 9
pg 8
pg 19
10623SB
10663SB
16104CH
9921
9516
9251
9939
9831
MOULDING AND MILLWORK MANUFACTURING
LEXINGTON MANUFACTURING
POPLAR
POPLAR MOULDINGS
•
Preferred paint grade species by Upscale Builders
•
Available in Solid and Finger Jointed (Mouldings & Boards)
•
is
sh
FJ Primed Option (Single or Double Primed) with a Profile Sanded Finish
9923
9931
9933
Casing
11/16˝ x 2-3/4˝
Casing
9/16˝ x 2-1/4˝
Casing
5/8˝ x 3-1/2˝
Casing
1/2˝ x 3-1/2˝
Casing
11/16˝ x 3-1/2˝
Baseboard
5/8˝ x 11-1/4˝
Baseboard
5/8˝ x 11-1/4˝
Chair Rail
1/2˝ x 3-1/4˝
•
Premier FJ manufacturer in North America
pg 13
pg 7
pg 7
pg 10
pg 13
pg 23
pg 23
pg 41
•
Superior Quality Control from Kiln Drying to Finished Product
18136-B
18136-TB
18168-B
18232-B
20104-CB
20136-CB
20136-EBM
20160-B
Baseboard
9/16˝ x 4-1/4˝
Baseboard
9/16˝ x 4-1/4˝
Baseboard
9/16˝ x 5-1/4˝
Baseboard
9/16˝ x 7-1/4˝
Baseboard
5/8˝ x 3-1/4˝
Baseboard
5/8˝ x 4-1/4˝
Baseboard
5/8˝ x 4-1/4˝
Baseboard
5/8˝ x 5˝
pg 21
pg 21
pg 27
pg 21
pg 21
pg 25
pg 26
pg 27
20168-CB
20168-EB
20232-CB
20232-EB
22104CH
22136-CB
22168-CB
22168-EB
Baseboard
5/8˝ x 5-1/4˝
Baseboard
5/8˝ x 5-1/4˝
Baseboard
5/8˝ x 7-1/4˝
Baseboard
5/8˝ x 7-1/4˝
Chair Rail
11/16˝ x 3-1/4˝
Baseboard
11/16˝ x 4-1/4˝
Baseboard
11/16˝ x 5-1/4˝
Baseboard
11/16˝ x 5-1/4˝
pg 26
pg 27
pg 26
pg 27
pg 41
pg 26
pg 26
pg 27
22232-CB
24112-CA
Baseboard
11/16˝ x 7-1/4˝
pg 26
24112-C-CA
24112CCL
24112-E-CA
Architrave
11/16˝ x 3-1/2˝
3/4˝ x 3-1/2˝
Casing
3/4˝ x 3-1/2˝
Casing
5/8˝ x 3-1/2˝
Casing
3/4˝ x 3-1/2˝
pg 17
pg 9
pg 9
pg 16
24136-A-CR
24136-C-CR
Casing
11/16˝ x 3-1/2˝
3/4˝ x 3-1/2˝
Crown
3/4˝ x 4-1/4˝
Crown
3/4˝ x 4-1/4˝
pg 8
pg 30
pg 29
24136-E-CA
24136-RF-CA
24168ACR
24168-FCA
24168-QA-CR
Casing
3/4˝ x 4-1/4˝
Casing
3/4˝ x 4-1/4˝
Crown
3/4˝ x 5-1/4˝
Crown
13/16˝ x 5-1/4˝
3/4˝ x 5-1/4˝
Casing
3/4˝ x 5-1/4˝
Crown
3/4˝ x 5-1/4˝
Crown
13/16˝ x 6˝
Crown
3/4˝ x 6˝
pg 11
pg 12
pg 37
pg 30
pg 12
pg 33
pg 30
pg 32
28192-CR
32112-CA
34136-CA
34232-A-CR
34232BCR
Chair Rail
1˝ x 3-1/4˝
Casing
1˝ x 3-1/2˝
Crown
7/8˝ x 7-1/4˝
Architrave
1-1/16˝ x 3-1/2˝
Casing
1-1/16˝ x 4-1/4˝
Crown
1-1/16˝ x 7-1/4˝
Crown
1-1/16˝ x 7-1/4˝
Bar Rail
1-3/4˝ x 4-1/2˝
pg 41
pg 13
pg 37
pg 17
pg 18
pg 33
pg 35
pg 43
BBI7
BB07/BB010
OB Corner Block
1-1/16˝ x 1-1/16˝
PB742
Plinth Block
1-1/16˝ x 6-1/2˝ x 3-1/2˝
34112-H-CA
26192-CR
32104CH
IB Corner Block
1-1/16˝ x 1-1/16˝
32242CR
24168-C-CR
24112-P-CA
PB743
Plinth Block
1-1/16˝ x 8˝ x 4-1/2˝
PB795
PB816
Plinth Block
1-1/16˝ x 9-1/4˝ x 5-1/2˝
Plinth Block
1-1/16˝ x 6-1/2˝ x 3-3/4˝
pg 52
pg 52
PVC180
R734CB
Brickmould
1-1/4˝ x 2˝
Rosette
27/32˝ x 3-1/2˝ x 3-1/2˝
pg 49
pg 52
pg 52
pg 52
pg 52
pg 52
R740CB
R755CB
R761CB
R789CB
Rosette
27/32˝ x 4-1/2˝ x 4-1/2˝
Rosette
1-1/8˝ x 5-1/2˝ x 5-1/2˝
Rosette
27/32˝ x 2-5/8˝ x 2-5/8˝
Rosette
27/32˝ x 3-3/4˝ x 3-3/4˝
Rosette
1-1/16˝ x 3-3/4˝ x 3-3/4˝
Rosette
1-1/16˝ x 3-1/2˝ x 3-1/2˝
Rosette
1-1/16˝ x 4˝ x 4˝
pg 52
pg 52
pg 52
pg 52
pg 52
pg 52
pg 52
RCB334B
RCB3B
56144
VIRGINIA MANUFACTURING
RED OAK
K
RED OAK MOULDINGS
•
Resists Abrasion
•
Distinct, Beautiful Grain
•
Subtle Colour that is Enhanced with a Light Stain
•
Attractive in Both Traditional and Contemporary Decor
Our Signature Series Red Oak mouldings and boards are precision
machined and sanded on the profile face to ensure a smooth and
consistent surface that will accept an even stain. Made from only
the finest Appalachian Oak these mouldings and boards
are sorted to be 85% Heartwood.
RCB44B
STORAGE, HANDLING AND PREPARATION OF ALL MOULDINGS AND S4S BOARDS
Until the time this product has been correctly final coated (after painting or staining) and installed, in conformance with all
paint manufacturer recommendations as well as the highest and best building practices, respectively, for intended use, it must
be continuously and effectively protected from exposure to direct sunlight, ground contact and the elements. It should
be stored only in a dry, clean location and transported only if fully protected from water. As a final preparation before
installation: (a) indoors, the product must be “acclimated” to the environment by storing it in the installation space for at
least 3 days (with both faces exposed to the air in that space); (b) outdoors, every surface lacking both primer and final coat
must be effectively coated to achieve protection recommended by the paint manufacturer respecting intended use.
58
Eastern North American Poplar is perfectly suited to accept paint,
stain or a natural finish making it a versatile option as a Hardwood
moulding or board. Our precision machined mouldings are
available in both Custom and Stock profiles.
MAPLE
MAPLE MOULDINGS
•
Smooth Finish
•
Consistent Colour
•
Closed Grain Surface
•
Variety of Looks Achieved through Different Stains
•
Choice of “Select White Soft” or “Northern Select White Hard”
Our Signature Series Northern Select White Hard Maple mouldings and
e
boards are precision machined and sanded on the profile face to ensure
a smooth and consistent surface that will accept an even stain.
MADE IN THE U.S.A.
Moulding & Millwork is North America’s leading supplier of mouldings. We offer the largest and
most innovative selection of quality products. Take advantage of virtually endless possibilities.
Moulding & Millwork Inc. CHICAGO
2200 West Haven Ave.,
New Lenox, IL 60451
t. 815.717.2660
t. 800.244.1348
f. 815.717.2651
www.mouldingandmillwork.com