KV-34FS120 - Audio Lab of Ga
Transcription
HISTORY INFORMATION FOR THE FOLLOWING MANUAL: BA-6 SERVICE MANUAL MODEL NAME KV-27FS320 KV-27FS320 KV-32FS120 KV-32FS120 KV-32FS320 KV-32FS320 KV-34FS120 KV-34FS120 KV-36FS120 KV-36FS120 KV-36FS120 KV-36FS320 KV-36FS320 KV-36FS320 KV-38FS120 REMOTE COMMANDER DESTINATION CHASSIS CHASSIS NO. RM-Y196 US SCC-S61S-A RM-Y196 CANADA SCC-S59N-A RM-Y195 US SCC-S61P-A RM-Y195 CANADA SCC-S59K-A RM-Y196 US SCC-S61T-A RM-Y196 CANADA SCC-S59P-A RM-Y195 LATIN NORTH SCC-S73F-A RM-Y195 LATIN SOUTH SCC-S73G-A RM-Y195 US SCC-S61Q-A RM-Y195 CANADA SCC-S59L-A RM-Y195 HAWAII SCC-S74A-A RM-Y196 US SCC-S61R-A RM-Y196 CANADA SCC-S59M-A RM-Y196 HAWAII SCC-S74B-A RM-Y195 LATIN NORTH SCC-S73G-A ORIGINAL MANUAL ISSUE DATE: 5/2004 REVISION DATE SUBJECT 5/2004 No revisions or updates are applicable at this time. TRINITRON® COLOR TELEVISION 9-965-964-01 Self Diagnosis Supported model BA-6 SERVICE MANUAL MODEL NAME REMOTE COMMANDER KV-27FS320 KV-27FS320 KV-32FS120 KV-32FS120 KV-32FS320 KV-32FS320 KV-34FS120 KV-34FS120 KV-36FS120 KV-36FS120 KV-36FS120 KV-36FS320 KV-36FS320 KV-36FS320 KV-38FS120 DESTINATION CHASSIS CHASSIS NO. RM-Y196 US SCC-S61S-A RM-Y196 CANADA SCC-S59N-A RM-Y195 US SCC-S61P-A RM-Y195 CANADA SCC-S59K-A RM-Y196 US SCC-S61T-A RM-Y196 CANADA SCC-S59P-A RM-Y195 LATIN NORTH SCC-S73F-A RM-Y195 LATIN SOUTH SCC-S73G-A RM-Y195 US SCC-S61Q-A RM-Y195 CANADA SCC-S59L-A RM-Y195 HAWAII SCC-S74A-A RM-Y196 US SCC-S61R-A RM-Y196 CANADA SCC-S59M-A RM-Y196 HAWAII SCC-S74B-A RM-Y195 LATIN NORTH SCC-S73G-A KV-27FS320 KV-32FS120 ® TRINITRON COLOR TELEVISION 9-965-964-01 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 TABLE OF CONTENTS SECTION TITLE PAGE SECTION TITLE PAGE Specifications ................................................................................. 4 SECTION 5: DIAGRAMS..................................................................... 61 Warnings and Cautions .................................................................. 6 5-1. Circuit Boards Location ........................................................ 61 Safety Check-Out ........................................................................... 7 5-2. Printed Wiring Board and Schematic Diagram Information.. 61 Self-Diagnostic Function................................................................. 8 5.3. Block Diagram and Schematics ........................................... 62 SECTION 1: DISASSEMBLY............................................................... 10 A Board Schematic Diagram (1 of 2).................................... 63 1-1. Rear Cover Removal............................................................ 10 A Board Schematic Diagram (2 of 2).................................... 64 1-2. Chassis Assembly Removal................................................. 10 HM Board Schematic Diagram (1 of 4) (KV-27FS320/32FS320/36FS320 Only) .................. 66 1-3. Service Position ...................................................................11 1-4. Picture Tube Removal.......................................................... 12 Anode Cap Removal Procedure........................................... 12 Cable Wire Dressing ............................................................ 13 KV-27FS320/32FS320/36FS320 Models........................ 13 HM Board Schematic Diagram (2 of 4) (KV-27FS320/32FS320/36FS320 Only) .................. 67 HM Board Schematic Diagram (3 of 4) (KV-27FS320/32FS320/36FS320 Only) .................. 68 KV-32FS120/34FS120 Models ....................................... 13 HM Board Schematic Diagram (4 of 4) (KV-27FS320/32FS320/36FS320 Only) .................. 68 KV-36FS120/38FS120 Models ....................................... 18 V Board Schematic Diagram ............................................... 69 SECTION 2: SET-UP ADJUSTMENTS................................................ 23 2-1. Beam Landing ...................................................................... 23 2-2. Convergence........................................................................ 24 2-3. Focus ................................................................................... 25 2-4. Screen (G2).......................................................................... 26 2-5. Method of Setting the Service Adjustment Mode ................. 26 2-6. White Balance Adjustments ................................................. 26 SECTION 3: SAFETY RELATED ADJUSTMENTS............................. 27 M Board Schematic Diagram ............................................... 70 C Board Schematic Diagram ............................................... 72 HN Board Schematic Diagram (KV-27FS320/32FS320/36FS320 Only) .................. 73 HR Board Schematic Diagram (KV-27FS320/32FS320/36FS320 Only) .................. 73 HS Board Schematic Diagram (KV-32FS120/34FS120/36FS120/38FS120 Only)... 73 HU/HD Board Schematic Diagram (KV-27FS320/32FS320/36FS320 Only) .................. 76 3-1. X R530, R531 Confirmation Method (HV Hold-Down Confirmation) and Readjustments........................................ 27 5-4. Semiconductors ................................................................... 79 3-2. B+ Voltage Confirmation and Adjustment ............................ 27 SECTION 6: EXPLODED VIEWS........................................................ 80 SECTION 4: CIRCUIT ADJUSTMENTS.............................................. 28 6-1. Chassis (KV-27FS320/32FS320/36FS320 Only)............................... 80 4-1. Setting the Service Adjustment Mode .................................. 28 4-2. Memory Write Confirmation Method .................................... 28 4-3. Remote Adjustment Buttons and Indicators ......................... 28 4-4. Service Data Lists ................................................................ 29 6-2. Picture Tube (KV-27FS320/32FS320/36FS320 Only)............................... 81 6-3. Chassis (KV-32FS120/34FS120/36FS120/38FS120 Only) ............... 82 KV-32FS320 Service Data ................................................... 30 6-4. Picture Tube (KV-32FS120/34FS120/36FS120/38FS120 Only) ............... 83 KV-36FS320 Service Data ................................................... 39 SECTION 7: ELECTRICAL PARTS LIST........................................... 84 KV-27FS320 Service Data ................................................... 29 KV-32FS120/34FS120 Service Data.................................... 48 KV-36FS120/38FS120 Service Data.................................... 57 4-5. ID Map Table ........................................................................ 57 4-6. A Board Adjustments............................................................ 58 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 3 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 SPECIFICATIONS KV-27FS320 Power Requirements 120V, 60Hz Number of Inputs/Outputs Video 1) 3 S Video 2) 1 2 Y,PB, PR 3) Audio 4) 2 RF 1 10W x 2 Speaker Output (W) Power Consumption (W) In Use (Max) 180W In Standby (Max) 5) 1W Dimensions (W x H x D) mm 784 x 601.5 x 520 mm 7/8 5/8 1/2 in 30 x 23 x 20 in Mass kg 47.4 kg lbs 104 lbs 8 oz KV-32FS120 KV-32FS320 KV-34FS120 120V, 60Hz 120V, 60Hz 120V-220V, 50/60Hz 3 1 1 3 1 10W x 2 3 1 2 2 1 10W x 2 3 1 1 3 1 10W x 2 175W 1W 190W 1W 175W (170W Chile, Peru, Bolivia) 1W 898 x 696 x 576 mm 35 3/8 x 27 3/8 x 22 5/8 in 898 x 682 x 584 mm 35 3/8 x 26 7/8 x 23 in 898 x 696 x 576 mm 35 3/8 x 27 3/8 x 22 5/8 in 75 kg 165 lbs 6 oz 75.80 kg 167 lbs 2 oz 75 kg 165 lbs 6 oz KV-36FS320 KV-38FS120 1) 1 Vp-p 75 ohms unbalanced, sync negative KV-36FS120 2) Y: 1 Vp-p 75 ohms unbalanced, sync negative C: 0.286 Vp-p (Burst signal), 75 ohms 3) Y: 1.0 Vp-p, 75 ohms, sync negative; PB: 0.7 Vp-p, 75 ohms; Power Requirements 120V, 60Hz Number of Inputs/Outputs Video 1) 3 S Video 2) 1 1 Y,PB, PR 3) Audio 4) 3 RF 1 10W x 2 Speaker Output (W) Power Consumption (W) In Use (Max) 180W In Standby (Max) 5) 1W Dimensions (W x H x D) mm 985 x 774 x 633 mm 3/4 7/8 in 38 x 30 1/2 x 24 in Mass kg 98.4 kg lbs 216 lbs 15 oz 120V, 60Hz 3 1 2 2 1 10W x 2 3 1 1 3 1 10W x 2 190W 1W 180W 1W 1020 x 760 x 640 mm 40 1/8 x 29 7/8 x 25 1/4 in 985 x 774 x 633 mm 38 3/4 x 30 1/2 x 24 7/8 in 101.2 kg 223 lbs 2 oz 98.4 kg 216 lbs 15 oz ™ SRS PR Vp-p, 75 ohms. 4) 500 mVrms (100% modulation), Impedance: 47 kilohms TruSurround by 120V-220V, 50/60Hz 5) This specification is the maximum wattage. SRS (SOUND RETRIEVAL SYSTEM) ® TruSurround is a trademark of SRS Labs, Inc. SRS and the SRS symbol are registered trademarks of SRS Labs, Inc. in the United States and in select foreign countries. SRS and TruSurround are incorporated under license from SRS Labs, Inc. and are protected under United States Patent Nos. 4,748,669 and 4,841,572 with numerous additional issued and pending foreign patents. Purchase of this product does not convey the right to sell recordings made with the TruSurround technology. The SRS (SOUND RETRIEVAL SYSTEM) is manufactured by Sony Corporation under license from SRS Labs, Inc. It is covered by U.S. Patent No. 4,748,669. Other U.S. and foreign patents pending. The word ‘SRS’ and the SRS symbol are registered trademarks of SRS Labs, Inc. BBE and BBE symbol are trademarks of BBE Sound, Inc. and are licensed by BBE Sound, Inc. under U.S. Patent No. 4,638,258 and 4,482,866. Design and specifications are subject to change without notice. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 4 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Television system American TV standard, NTSC Channel coverage VHF: 2-13/ UHF: 14-69/ CATV: 1-125 Antenna 75-ohm external antenna terminal for VHF/UHF Picture tube ® FD Trinitron tube Visible screen size 27-inch picture measured diagonally (KV-27FS320 Only) 32-inch picture measured diagonally (KV-32FS120/32FS320/34FS120 Only) 36-inch picture measured diagonally (KV-36FS120/36FS320/38FS120 Only) Actual screen size 29-inch measured diagonally (KV-27FS320 Only) 34-inch measured diagonally (KV-32FS120/32FS320/34FS120 Only) 38-inch measured diagonally (KV-36FS120/36FS320/38FS120 Only) Supplied Accessories Remote Commander RM-Y195 (All Except KV-27FS320/32FS320/36FS320) Remote Commander RM-Y196(KV-27FS320/32FS320/36FS320 Only) Two Size AA (R6) Batteries Optional Accessories TV Stand SU-27F2 (KV-27FS320 Only) SU-32F2 (KV-32FS120/32FS320/34FS120 Only) SU-36F2 (KV-36FS120/36FS320/38FS120 Only) KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 5 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 WARNINGS AND CAUTIONS CAUTION Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield, or carbon painted on the CRT, after removing the anode. WARNING!! An isolation transformer should be used during any service to avoid possible shock hazard, because of live chassis. The chassis of this receiver is directly connected to the AC power line. ! SAFETY-RELATED COMPONENT WARNING!! Components identified by shading and ! mark on the schematic diagrams, exploded views, and in the parts list are critical for safe operation. Replace these components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit adjustments that are critical for safe operation are identified in this manual. Follow these procedures whenever critical components are replaced or improper operation is suspected. ATTENTION!! Apres avoir deconnecte le cap de l’anode, court-circuiter l’anode du tube cathodique et celui de l’anode du cap au chassis metallique de l’appareil, ou la couche de carbone peinte sur le tube cathodique ou au blindage du tube cathodique. Afin d’eviter tout risque d’electrocution provenant d’un chássis sous tension, un transformateur d’isolement doit etre utilisé lors de tout dépannage. Le chássis de ce récepteur est directement raccordé à l’alimentation du secteur. ! ATTENTION AUX COMPOSANTS RELATIFS A LA SECURITE!! Les composants identifies par une trame et par une marque ! sur les schemas de principe, les vues explosees et les listes de pieces sont d’une importance critique pour la securite du fonctionnement. Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement sont identifies dans le present manuel. Suivre ces procedures lors de chaque remplacement de composants critiques, ou lorsqu’un mauvais fonctionnement suspecte. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 6 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer: 1. Check the area of your repair for unsoldered or poorly soldered connections. Check the entire board surface for solder splashes and bridges. 2. Check the interboard wiring to ensure that no wires are “pinched” or touching high-wattage resistors. 3. Check that all control knobs, shields, covers, ground straps, and mounting hardware have been replaced. Be absolutely certain that you have replaced all the insulators. 4. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement. 5. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement. 6. Check the line cords for cracks and abrasion. Recommend the replacement of any such line cord to the customer. 7. Check the B+ and HV to see if they are specified values. Make sure your instruments are accurate; be suspicious of your HV meter if sets always have low HV. 8. Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below. Leakage Test The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes). Leakage current can be measured by any one of three methods. 1. A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers’ instructions to use these instructions. 2. A battery-operated AC milliampmeter. The Data Precision 245 digital multimeter is suitable for this job. 3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The “limit” indication is 0.75 V, so analog meters must have an accurate low voltage scale. The Simpson’s 250 and Sanwa SH-63TRD are examples of passive VOMs that are suitable. Nearly all battery-operated digital multimeters that have a 2 VAC range are suitable (see Figure A). How to Find a Good Earth Ground A cold-water pipe is a guaranteed earth ground; the cover-plate retaining screw on most AC outlet boxes is also at earth ground. If the retaining screw is to be used as your earth ground, verify that it is at ground by measuring the resistance between it and a cold-water pipe with an ohmmeter. The reading should be zero ohms. If a cold-water pipe is not accessible, connect a 60- to 100-watt trouble- light (not a neon lamp) between the hot side of the receptacle and the retaining screw. Try both slots, if necessary, to locate the hot side on the line; the lamp should light at normal brilliance if the screw is at ground potential (see Figure B). To Exposed Metal Parts on Set Trouble Light AC Outlet Box 0.15 F 1.5 K Ω Ohmmeter Cold-water Pipe AC Voltmeter (0.75 V) Earth Ground Figure A. Using an AC voltmeter to check AC leakage. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Figure B. Checking for earth ground. 7 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 SELF-DIAGNOSTIC FUNCTION Self Diagnosis Supported model The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER LED will automatically begin to flash. The number of times the LED flashes translates to a probable source of the problem. A definition of the STANDBY/TIMER LED flash indicators is listed in the instruction manual for the user’s knowledge and reference. If an error symptom cannot be reproduced, the Remote Commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these problems occur. Diagnostic Test Indicators When an error occurs, the STANDBY/TIMER LED will flash a set number of times to indicate the possible cause of the problem. If there is more than one error, the LED will identify the first of the problem areas. Results for all of the following diagnostic items are displayed on screen. No error has occurred if the screen displays a “0”. Diagnostic Item Description Power does not turn on No. of times Self-Diagnositc Probable Cause Location STANDBY/ TIMER Display/ lamp flashes Diagnostic Result Does not light • Power cord is not plugged in. • Fuse is burned out (F601). (A Board) Detected Symptoms • Power does not come on. • No power is supplied to the TV. • AC Power supply is faulty. +B overcurrent (OCP)* 2 times 2:0 or 2:1 • H.OUT (Q502) is shorted. (A Board) • IC702 is shorted. (C Board) • Power does not come on. • Load on power line is shorted. I-Prot 4 times 4:0 or 4:1 • +13V is not supplied. (A Board) • IC561 is faulty. (A Board) • Has entered standby state after horizontal raster. • Vertical deflection pulse is stopped. • Power line is shorted or power supply is stopped. IK (AKB) 5 times 5:0 or 5:1 • IC001 is faulty. (M Board) • No raster is generated. • Screen (G2) is improperly adjusted.** • CRT Cathode current detection reference pulse output is small. *If a +B overcurrent is detected, stoppage of the vertical deflection is detected simultaneously. The symptom that is diagnosed first by the mircrocontroller is displayed on the screen. **Refer to Screen (G2) Adjustments in Section 2-4. of this manual. Display of Standby/Timer LED Flash Count 2 times 4 times 5 times LED ON 0.3 sec. LED OFF 0.3 sec. LED OFF 3 sec. Standby/Timer LED Diagnostic Item Flash Count* +B Overcurrent 2 times I-Prot 4 times IK (AKB) 5 times *One flash count is not used for self-diagnostic. Stopping the Standby/Timer LED Flash Turn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY/TIMER LAMP from flashing. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 8 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Self-Diagnostic Screen Display For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to bring up past occurrences of failure on the screen for confirmation. To Bring Up Screen Test In standby mode, press buttons on the Remote Commander sequentially, in rapid succession, as shown below: Display Sound Volume - Channel 5 Power ON Note that this differs from entering the Service Mode (Sound Volume + ). Self-Diagnostic Screen Display SELF DIAGNOSTIC 2: +B OCP 0 3: +B OVP N/A 4: VSTOP 0 5: AKB 1 101: WDT N/A Numeral “0” means that no fault was detected. Numeral “1” means a fault was detected one time only. Handling of Self-Diagnostic Screen Display Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen during repairs. When you have completed the repairs, clear the result display to “0”. Unless the result display is cleared to “0”, the self-diagnostic function will not be able to detect subsequent faults after completion of the repairs. Clearing the Result Display To clear the result display to “0”, press buttons on the Remote Commander sequentially when the diagnostic screen is displayed, as shown below: Channel 8 ENTER Quitting the Self-Diagnostic Screen To quit the entire self-diagnostic screen, turn off the power switch on the Remote Commander or the main unit. Self-Diagnostic Circuit M BOARD IC001 Y/CHROMA JUNGLE FROM C BOARD IC702 PIN 5 FROM A BOARD IC501 PIN 1 A BOARD IC561 V. OUT 51 IK-AKBIN M BOARD IC001 SYSTEM IO-BDAT REF 3 72 I-HLDWN 78 I-Prot 53 M BOARD IC002 MEMORY 5 BDA O-LED 79 DISPLAY +B overcurrent (OCP) Occurs when an overcurrent on the +B (135V) line is detected by pin 72 of IC001 (M Board). If the voltage of pin 72 of IC001 (M Board) is less than 1V when V.SYNC is more than seven verticals in a period, the unit will automatically turn off. I-Prot Occurs when an absence of the vertical deflection pulse is detected by pin 78 of IC001 (M Board). Power supply will shut down when waveform interval exceeds 2 seconds. IK (AKB) If the RGB levels* do not balance within 2 seconds after the power is turned on, this error will be detected by IC001 (M Board). TV will stay on, but there will be no picture. *(Refers to the RGB levels of the AKB detection Ref pulse that detects 1K). KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 9 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 SECTION 1: DISASSEMBLY 1-1. REAR COVER REMOVAL (KV-27FS320 PICTURED) Rear Cover 12 Screws +BVTP 4X16 TYPE2 TT(B) (KV-27FS320/32FS320/36FS320 Only) 16 Screws +BVTP 4X16 TYPE2 TT(B) (KV-32FS120/34FS120/ 36FS120/38FS120 Only) 7 Screws +BVTP 3X12 TYPE2 TT(B) (KV-27FS320/32FS320/36FS320 Only) 5 Screws +BVTP 3X12 TYPE2 TT(B) (KV-32FS120/34FS120/ 36FS120/38FS120 Only) 1-2. CHASSIS ASSEMBLY REMOVAL Claw Chassis Assembly KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 10 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 1-3. SERVICE POSITION (KV-27FS320 PICTURED) 1 Press on catch tab to release A Board. 2 Disconnect cables as needed to allow A Board to be removed. C Board M Board V Board HU Board HM Board HN Board A Board KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 11 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 1-4. PICTURE TUBE REMOVAL WARNING: BEFORE REMOVING THE ANODE CAP High voltage remains in the CRT even after the power is disconnected. To avoid electric shock, discharge CRT before attempting to remove the anode cap. Short between anode and CRT coated earth ground strap. 1 3 10 7 9 8 6 2 5 4 1. Discharge the anode of the CRT and remove the anode cap. 2. Unplug all interconnecting leads from the deflection yoke, neck assembly, degaussing coils and CRT grounding strap. 3. Remove the C Board from the CRT. 4. Remove the chassis assembly. 5. Loosen the neck assembly fixing screw and remove. 6. Loosen the deflection yoke fixing screw and remove. 7. Place the set with the CRT face down on a cushion and remove the degaussing coil holders. 8. Remove the degaussing coils. 9. Remove the CRT grounding strap and spring tension devices. 10. Unscrew the four CRT fixing screws [located on each CRT corner] and remove the CRT [Take care not to handle the CRT by the neck]. ANODE CAP REMOVAL PROCEDURE WARNING: High voltage remains in the CRT even after the power is disconnected. To avoid electric shock, discharge CRT before attempting to remove the anode cap. Short between anode and coated earth ground strap of CRT. NOTE: After removing the anode cap, short circuit the anode of the picture tube and the anode cap to either the metal chassis, CRT shield, or carbon painted on the CRT. REMOVAL PROCEDURES c b a Anode Button Turn up one side of the rubber cap in the direction indicated by arrow a . Use your thumb to pull the rubber cap firmly in the direction indicated by arrow b . HOW TO HANDLE AN ANODE CAP When one side of the rubber cap separates from the anode button, the anode cap can be removed by turning the rubber cap and pulling it in the direction of arrow c . 1. Do not use sharp objects which may cause damage to the surface of the anode cap. 2. To avoid damaging the anode cap, do not squeeze the rubber covering too hard. A material fitting called a shatter-hook terminal is built into the rubber. 3. Do not force turn the foot of the rubber cover. This may cause the shatter-hook terminal to protrude and damage the rubber. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 12 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 CABLE WIRE DRESSING KV-27FS320/32FS320/36FS320 MODELS (DATA NOT AVAILABLE) KV-32FS120/34FS120 MODELS 1 Dress right speaker wire through DGC’s tie wrap. Dress DGC lead wire with a 9mm purse lock 2 Dress left speaker wire through DGC’s tie wrap. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 13 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 3 Dress RGB harness over Rotation coil lead wire. Dress Rotation coil lead wire over DY clip and through rotation coil as shown in picture. 4 Dress VM and heaters harnesses over RGB to avoid interference with back cover installation. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 14 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 5 Dress CRT ground wires under DGC and beside VD board at the middle as picture shows, keep away from focus and HV lead wires. 6 Dress G2 wire and DF wire as shown in picture. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 15 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 7 Dress HV cable and focus wire together using a 5mm purse lock (3-703-981-02). Install purse lock over carbon paint edge. 8 Dress DY lead wire with a 9mm purse lock (3-703-982-02) KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 16 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 9 Dress AC-Cord into CRT support hook as shown in picture. Dress 12P video harness through bottom board’s purse locks and under AC-Cord. Unstall purse locks as shown in picture. Dress lightning wire under 12P harness. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 17 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-36FS120/38FS120 MODELS 1 Dress right speaker wire through DGC band. Dress DGC lead wire with a 9mm purse lock 2 Dress left speaker wire through DGC band KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 18 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 3 Dress RGB harness over Rotation coil lead wire. Dress Rotation coil lead wire over DY clip and through rotation coil as shown in picture. 4 Dress earth groun wires under DGC and over VD board. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 19 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 5 Bend H-Stat wire towards C board. 6 Dress G2 wire and DF wire as shown in picture. Dress heaters and VM harnesses on the left side of DY lead wire KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 20 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 7 Dress HV cable and focus wire together using a 5mm purse lock, install purse lock 150mm±10 from rubber cap . Dress HV through standing holder, install holder on CRT’s carbon paint edge 8 Dress DY lead wire with a 9mm purse lock (3-703-982-02) KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 21 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 9 Dress AC-Cord into CRT support hook using a 9mm purse lock as shown in picture. Dress 12P video harness through bottom board’s purse locks and under AC-Cord. Install purse locks as shown in picture. Dress lightning wire under 12P harness. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 22 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 SECTION 2: SET-UP ADJUSTMENTS The following adjustments should be made when a complete realignment is required or a new picture tube is installed. These adjustments should be performed with rated power supply voltage unless otherwise noted. Set the controls as follows unless otherwise noted: VIDEO MODE: Pro PICTURE CONTROL: Normal BRIGHTNESS CONTROL: Normal 2-1. BEAM LANDING Before beginning adjustment procedure: 1. Degauss the entire screen. 2. Feed in the white pattern signal. Perform the adjustments in order as follows: 1. Beam Landing 2. Convergence 3. Focus 4. Screen (G2) 5. White Balance Note Test Equipment Required: 1. Color Bar Pattern Generator 2. Degausser 3. DC Power Supply 4. Digital Multimeter 6. Switch over the raster signal to red and blue and confirm the condition. 7. When the position of the deflection yoke is determined, tighten it with the deflection yoke mounting screw. 8. If landing at the corner is not right, adjust by using the disk magnets. ADJUSTMENT PROCEDURE 1. Input a raster signal with the pattern generator. 2. Loosen the deflection yoke mounting screw, and set the purity control to the center as shown below: Purity Control Purity control corrects this area. 3. Turn the raster signal of the pattern generator to green. 4. Move the deflection yoke backward, and adjust with the purity control so that green is in the center and red and blue are even on both sides. Disk magnets or rotatable disk magnets correct these areas (a-d). a b c d Deflection yoke positioning corrects these areas. b d Blue Red Green a c 5. Move the deflection yoke forward, and adjust so that the entire screen becomes green. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 23 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 2-2. CONVERGENCE HORIZONTAL STATIC CONVERGENCE Before starting convergence adjustments: 1 Perform FOCUS, VLIN and VSIZE adjustments. 2. Set BRIGHTNESS control to minimum. 3. Feed in dot pattern. If the blue dot does not converge with the red and green dots, perform the following: 1. Move H STAT VR magnet (a) to correct insufficient H.Static convergence. VERTICAL STATIC CONVERGENCE H STAT VR 1. Adjust V. STAT magnet to converge red, green and blue dots in the center of the screen. Center dot R G B V.STAT PURITY BMC MAGNET RV701 H.STAT RG B V.STAT magnet 2. Tilt the V. STAT magnet and adjust static convergence to open or close the V. STAT magnet. When the V. STAT magnet is moved in the direction of arrow a and b, red, green, and blue dots move as shown below: 1 a B G a b b b B G R R 2 a a R b b B 3 b GB GR a a b B R b G G B R KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 24 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 DYNAMIC CONVERGENCE ADJUSTMENT Before performing this adjustment, perform Horizontal and Vertical Static Convergence Adjustment. 1. Slightly loosen deflection yoke screw. 2. Remove deflection yoke spacers. 3. Move the deflection yoke for best convergence as shown below: G R B G B R R G B B G 4. Adjust XCV core to balance X axis. 5. Adjust YCH VR to balance Y axis. 6. Adjust vertical red and blue convergence with V.TILT (TLV VR.) Note: Perform adjustment 3-6 while tracking items 1 and 2. R B G G BR R B TLH+ (R)(B) (B)(R) TLH- B R R SCREEN-CORNER CONVERGENCE B G R R G B 1. Affix a permalloy assembly corresponding to the misconverged areas: a b a B R G B R R B a-d: screen-corner misconvergence G G G b R B c d 4. Tighten the deflection yoke screw. 5. Install the deflection yoke spacers. d c 2-3. FOCUS 1. Adjust FOCUS control for best pictures. TLH PLATE ADJUSTMENT 1. Input crosshatch pattern. 2. Adjust PICTURE QUALITY to standard, PICTURE and BRIGHTNESS to 50%, and OTHER to standard. 3 Adjust the Horizontal Convergence of red and blue dots by tilting the TLH plate on the deflection yoke. Focus (FV) Screen (G2) RV701 TLH Plate V.STAT C Board XCV YCH TLV (TLV) KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 25 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 2-4. SCREEN (G2) 2-6. WHITE BALANCE ADJUSTMENTS 1. Input a dot pattern. 2. Set the PICTURE and BRIGHTNESS controls at minimum and COLOR control at normal. 3. Adjust SBRT, GCUT, BCUT in service mode with an oscilloscope as shown below so that voltages on the red, green, and blue cathodes are 172 ± 2VDC. 1. Input an entire white signal with burst. 2. Set to Service Adjustment Mode. 3. Set the PICTURE and BRIGHTNESS to minimum. 4. Adjust with SBRT if necessary. 5. Select GCUT and BCUT with 1 and 4 . 6. Adjust with 3 and 6 for the best white balance. 7. Set the PICTURE and BRIGHTNESS to maximum. 8. Select GDRV and BDRV with 1 and 4 . 9. Adjust with 3 and 6 for the best white balance. 10. Press MUTING then ENTER to save into the memory. 172 ±– 2VDC Pedestal Ground 4. Observe the screen and adjust SCREEN (G2) VR in FBT to obtain the faintly visible background of dot signal. 2-5. METHOD OF SETTING THE SERVICE ADJUSTMENT MODE SERVICE MODE PROCEDURE 1. Standby mode (power off). 2. Press Display Channel 5 Sound Volume + Power on the Remote Commander (press each button within a second). SERVICE ADJUSTMENT MODE ON 1. The CRT displays the time being adjusted. service Signal Type Display Item Category Mode defl hsiz Display Item 16 ntsc vchp 00000000 00000000 2. Press 1 or 4 on the Remote Commander to select the time. 3. Press 3 or 6 on the Remote Commander to change the data. 4. Press MUTING then ENTER to save into the memory. SERVICE ADJUSTMENT MODE MEMORY Turn the set off then on to exit Service Adjustment Mode. Mode Category service Signal Type defl Display Item Item Data hsiz MUTING Green ENTER Red write ntsc vchp 16 00000000 00000000 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 26 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 SECTION 3: SAFETY RELATED ADJUSTMENTS 3-1. X R530, R531 CONFIRMATION METHOD (HV HOLD-DOWN CONFIRMATION) AND READJUSTMENTS The following adjustments should always be performed when replacing the following components which are marked with Y on the schematic diagram: Part Replaced (Y) C531, C532, D519, D520, D521, IC501, IC600, PH602, R529, R530, R531, R532, R533, R550, T503 (FBT), T504 (DFT) HOLD-DOWN READJUSTMENT If the setting indicated in Step 2 of Hold-Down Operation Confirmation cannot be met, readjustment should be performed by altering the resistance value of R530, R531 component marked with X. digital multimeter + - Adjustment (X) HV HOLD-DOWN R530, R531 R531 R530 PREPARATION BEFORE CONFIRMATION 1. Using a Variac, apply AC input voltage: 120 +/- 2.0 VAC. 2. Turn the POWER switch ON. 3. Input a white signal and set the PICTURE and BRIGHT controls to maximum. 4. Confirm that the voltage of more than 23.0 VDC appears between TP85 and ground on the A Board. HOLD-DOWN OPERATION CONFIRMATION 1. Connect the current meter between Pin 11 of the FBT (T503) and the PWB land where Pin 11 would normally attach. (See Figure 1). 2. Input a dot signal and set PICTURE and BRIGHTNESS to minimum: IABL = 2175 + 100/ -325 µA. 3. Confirm the voltage of A Board TP91 is 134.6 ± 1.0 VDC. 4. Connect the digital voltmeter and the DC power supply to TP85 and ground. (See Figure 1). 5. Increase the DC power voltage gradually until the picture blanks out. 6. Turn DC power source off immediately. 7. Read the digital voltmeter indication: KV-27FS320 Only (standard = 24.78 + 0.0/ - 0.1 VDC). All except KV-27FS320 (standard = 27.24 + 0.0/ - 0.1 VDC). 8. Input a white signal and set PICTURE and BRIGHTNESS to maximum: IABL = 2175 + 100/ -325 µA. 9. Repeat steps 4 to 7. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 DC Power Supply TP85 TP85 T503 FBT FBT ammeter 3mA DC range + - A + - Figure 1 3-2. B+ VOLTAGE CONFIRMATION AND ADJUSTMENT Always perform the following adjustments when replacing the following components, which are marked with Y on the schematic diagram on the A Board: Adjustment (Y) A BOARD IC600, PH602 1. Using a Variac, apply AC input voltage: 130 + 2.0/-0.0 VAC 2. Input a monoscope signal. 3. Set the PICTURE control and the BRIGHT control to minimum. 4. Confirm the voltage on A Board between TP23 and ground is less than 136.5 VDC. 5. If step 4 is not satisfied, replace R530 and R531 on A Board and repeat the above steps. 27 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 SECTION 4: CIRCUIT ADJUSTMENTS ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER Use the Remote Commander (RM-Y195, RM-Y196) to perform the circuit adjustments in this section. Test Equipment Required: 1. Pattern generator 2. Frequency counter 3. Digital multimeter 4. Audio oscillator 4-1. SETTING THE SERVICE ADJUSTMENT MODE 4-2. MEMORY WRITE CONFIRMATION METHOD 1. Standby mode (Power off). 2. Press the following buttons on the remote commander within a second of each other: Display Channel 5 Sound Volumne + Power 1. After adjustment, pull out the plug from the AC outlet, then replace the plug in the AC outlet again. 2. Turn the power switch ON and set to Service Mode. 3. Call the adjusted items again to confirm they were adjusted. SERVICE ADJUSTMENT MODE ON 4-3. REMOTE ADJUSTMENT BUTTONS AND INDICATORS 1. The CRT displays the item being adjusted. Item Display Data Item # 41 Signal Category Type DEF Display Item NTSC 1 NVM OK POWER MUTING (Service Mode) (Enter into memory) DISPLAY H SIZE (Service Mode) M65582AMF-101FPZ0 2. Press 1 or 4 on the Remote Commander to select the item. 3. Press 3 or 6 on the Remote Commander to change the data. 4. Press MUTING then ENTER to write into memory. SERVICE ADJUSTMENT MODE MEMORY Mode Category service Signal Type defl Display Item Item Data hsiz 16 3 Item (Data up) 1 Disp. (Item up) 6 Item (Data down) 2 (Device Item Up) 5 (Device item down) 4 Disp. (Item down) ENTER write ntsc vchp 00000000 00000000 (Enter into memory) 8 (Initialize) 0 (Remove from memory) 1. Press 8 then ENTER on the Remote Commander to initialize. Mode service Signal Type Display Item Category defl hsiz VOLUME (+) (Service Mode) 16 RM-Y195 write ntsc vchp Item Data 00000000 00000000 Carry out Step 1 when adjusting IDs 0-7 and when replacing and adjusting IC002 2. Press MUTING then ENTER to write into memory. 3. Turn set off then on to exit Service Adjustment Mode. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 28 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 4-4. SERVICE DATA LISTS KV-27FS320 SERVICE DATA (DATA NOT AVAILABLE) KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 29 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS320 SERVICE DATA Fix/ Var No. Name Description VERSION Fix 0 VER Microprocessor version information Service Group Fix/ Var No. Name Description Var Var Var Var Var Var Var Var Var Var Var Var Var Var Fix Var Fix 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 HSIZ HPOS VSIZ VPOS VLIN SCOR VBOW VANG TRAP PAMP UPIN LPIN TROT HBLK RBLK LBLK VBLK Fix 18 Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 19 20 21 22 23 24 25 26 27 28 29 30 DEF Service Group H SIZE(EW DC) H POSITION V RAMP SIZE V POSITION(RAMP DC) V LINEARITY S CORRECTION BOW ANGLE EW TRAPESIUM EW PIN UPPER PIN LOWER PIN TROT H BLK mode select HBLK rear timing HBLK front timing V BLK width TOP VEND(when HMSK MACROVISION)prevent OFF HDW H PULSE WIDTH(25u/19u) AFC AFC GAIN AFC1 AFC1 TIME CONSTANT AFCW AFC1 PULL IN WIDE CDMD V DET WINDOW SW TIMING HSS SYNC SLICE LEVEL(H sepa) VSS SYNC SLICE LEVEL(V sepa) SLUD Auto Slice level UP/DOWN JPSW Jump SW HOSC H VCO fo offset ADJUST OFFSET EHT EHT EHTG EHT MODE KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Common Init Data = Common Init Data 41 15 25 30 37 39 37 40 29 31 30 31 128 0 33 58 3 = Means same as other register * Means change when tv turn on RF Init Data 35 13 22 31 Composite V Init Data 35 13 23 31 30 55 25 55 7 0 0 1 0 0 1 1 0 3 0 0 3 4 1 30 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS320 SERVICE DATA 16 : 9 Service Group VP1 Service Group Fix/ Var No. Name Description Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 1 2 3 4 5 6 7 8 9 10 11 VSIZ VPOS VLIN SCOR TRAP PAMP UPIN LPIN ABLG SCON VPW V RAMP SIZE V POSITION(RAMP DC) V LINEARITY S CORRECTION EW TRAPESIUM EW PIN UPPER PIN LOWER PIN ABL GAIN SUB CONTRAST LEVEL Jump Pulse Width Common Init Data 36 33 26 28 26 16 31 32 1 13 1 Common RF Composite V YUV Init Data 84 Init Data Init Data Init Data Memory Stick Init Data 70 70 68 68 67 66 Fix/ Var No. Name Description Fix 1 RDRV Var 2 GDRV Var 3 BDRV Var 4 RCUT R DRIVE G DRIVE when Color Temp. is "Cool" and "Neutral" B DRIVE when Color Temp. is "Cool" and "Neutral" Hardware AKB(R) CMP DATA Var 5 GCUT Hardware AKB(G) CMP DATA when Color Temp. is "Cool" and "Neutral" 71 71 70 Var 6 BCUT Hardware AKB(B) CMP DATA when Color Temp. is "Cool" and "Neutral" 62 61 60 Var Var Var Var 7 8 9 10 SCON SHUE SCOL SBRT 8 26 20 1 8 26 20 Fix 11 RON Fix 12 GON Fix 13 BON Fix 14 BLLV Fix 15 MTRX SUB CONTRAST LEVEL SUB TINT(HUE) SUB COLOR LEVEL SUB BRIGHTNESS R OUTPUT ON ( 0:R Output OFF 1:R Output ON ) G OUTPUT ON ( 0:G Output OFF 1:G Output ON ) B OUTPUT ON ( 0:B Output OFF 1:B Output ON ) BLUE STRETCH(00:no <-> 11:deep) only Color Temp "Cool" MATRIX RATIO SELECT KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 100 12 10 6 15 9 7 1 1 1 1 1 31 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS320 SERVICE DATA VP1 Service Group Fix/ Var No. Name Description Fix 16 AXIS Fix 17 SSHO Fix 18 SSHP Fix 19 SHPF Fix Fix 20 21 SHCL SHMX R-Y PHASE OFFSET SUB SHARPNESS GAIN(OVER) RF/VIDEO SUB SHARPNESS GAIN(PRE) RF/VIDEO SHRPNESS fo(00:2 CLK <-> 11:5 CLK) SHARPNESS CORING LEVEL SHARPNESS LIMITTER LEVEL Fix 22 AKBD AKB Self Diagnostic Counter(@1sec) Fix 23 AKBS Fix 24 REFP Fix Fix 25 26 YNRC BKON Fix 27 BKRC Fix Fix 28 29 BKDP BKSP AKB Switch ( 0 : AKB OFF 1 : H/W AKB ON ) AKB REFPLS timing ( "0"Fix when 16:9On ) YNR LIMITER LEVEL BLACK STRETCH ON BLACK STRETCH DETECTOR TIME CONSTANT1 BLACK STRETCH START POINT BLACK STRETCH POINT KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Common RF Composite V YUV Init Data 52 Init Data Init Data Init Data Memory Stick Init Data 3 2 2 3 11 11 13 13 0 1 0 0 1 15 5 1 0 15 1 = = = 32 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS320 SERVICE DATA VP2 Service Group Fix/ Var No. Name Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 1 2 3 4 5 6 7 8 9 10 11 VMOF VMLO VMHI VMDL VMPL VMWD VMCL VMMX CKLV CKON ALFA Fix 12 Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 13 14 15 16 17 18 19 20 21 22 23 24 Fix 25 Fix 26 Fix 27 Fix 28 Fix Fix 29 30 Description VM LEVEL at "Off" Setting VM LEVEL at "Low" Setting VM LEVEL at "High" Setting VM DELAY VM PORALITY VM WIDTH VM CORING LEVEL VM LIMITER LEVEL COLOR KILLER VTH FORCE KILLER ADAPTIVE DET SENSITIVITY YC SEPA FORCE YCMD SELECT(00:ADAPTIVE 01:H 10:V 11:HV) VACL V APERTURE CORING LEVEL VAGA V APERTURE GAIN LEVEL VAMX V APERTURE LIMITER LEVEL GAMM GAMMA(00:no <-->11:deep) YDLY Y DELAY TIME CDLY C DELAY YOFF Y OUTPUT MUTE BGPP BGP(for C DECODER)TIMING NOISE DET VTH1 NRCH NOISE DET VTH1 NRCL NOISE DET VTH1 NRVL NOISE DET VTH1 NRVH G DRIVE OFFSET only Color Temp. GDOF "Warm" B DRIVE OFFSET only Color Temp. BDOF "Warm" GCUT CMP DATA OFFSET only GCOF Color Temp. "Warm" BCUT CMP DATA OFFSET only BCOF Color Temp. "Warm" DCTV DCTRANSFER VTH DCTG DCTRANSFER GAIN KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Common RF Composite V YUV Init Data 2 5 11 Init Data Init Data Init Data Memory Stick Init Data 10 10 6 6 1 0 0 15 1 0 2 0 0 = 15 = 3 2 0 11 3 255 255 255 18 31 2 4 3 = 33 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS320 SERVICE DATA NR Service Group PALETTE Service Group Name Fix/ Var No. Var 1 Fix 2 Fix 3 Fix 4 Fix 5 Fix Fix 6 7 Fix 8 Fix 9 Fix Fix Fix 10 11 12 Fix 13 Fix/ Var No. Name Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 1 2 3 4 5 6 7 8 9 10 11 12 13 14 VPIC VBRI VCOL VHUE VSHA VVM VTRI VAPA VGMA VDCT BKDP BKRC BKSP CONO SCOL SHCL SHMX YNRC VMHI VMCL VMMX VAGA GAMM YNRS WSTH WSVA WSCA Description SUB COLOR LEVEL for NR SHARPNESS NOISE CORING LEVEL for NR SHARPNESS LIMITTER LEVEL for NR YNR LIMITER LEVEL for NR Common Init Data 4 15 7 7 VM LEVEL at "High" Setting for NR 7 VM CORING LEVEL for NR VM LIMITER LEVEL for NR 0 7 V APERTURE GAIN LEVEL for NR 0 GAMMA(00:no <-->11:deep) for NR 0 YNR ON for NR WEAK_SIGNAL VTH for NR WEAK SIGNAL VIDEO ATT for NR WEAK SIGNAL CHROMA ATT for NR 1 7 0 Description Picture Brightness Color Hue Sharpness VM Color Temp Aperture G Gamma DCT LV BLACK STRETCH DEPTH BLACK ST TIME 1 & TIME 2 BLACK STRETCH POINT CONTRAST OFFSET for RF KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 5 Common Init Data 63 31 32 31 35 2 0 7 3 12 2 243 3 1 STANDARD Init Data 50 31 31 31 37 1 1 4 2 9 2 243 1 0 MOVIE Init Data 37 28 31 31 34 1 2 3 2 9 1 244 1 0 PRO Init Data 31 31 31 31 31 0 1 0 0 2 1 244 1 0 34 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS320 SERVICE DATA ASIC Service Group Fix/ Var No. Name Description Fix 1 YNRS YNR ON Fix 2 CLPS CLAMP CONTROL SW ( 0:CLAMP OFF 1:CLAMP AUTO 2:CLAMP ON ) Fix 3 Fix 4 Fix 5 Fix Fix Fix Fix Fix Fix Fix Fix 6 7 8 9 10 11 12 13 Fix 14 Fix 15 Fix 16 Fix 17 Fix Fix Fix Fix Fix Fix Fix Var Var Fix Fix Fix 18 19 20 21 22 23 24 25 26 27 28 29 MODULATOR FEEDBACK GAIN CONTROL CLAMP AUTO ON KEEP TIMER CLPT COUNT (@100ms) C DECODER TIME AASL CONSTANT(32,16,8,1H) BASL ACC TIME CONSTANT ACTH ROM HYS AVAV AVE SEL AV B2TH B2COMP AMUT RGB POWER ON MUTE PMUT RGB MUTE(EXCEPT OSD) CORL R CUTOFF lower CORH R CUTOFF upper G CUTOFF lower when Color Temp. COGL is "Cool" and "Neutral" G CUTOFF upper when Color Temp. COGH is "Cool" and "Neutral" B CUTOFF lower when Color Temp. COBL is "Cool" and "Neutral" B CUTOFF upper when Color Temp. COBH is "Cool" and "Neutral" ALSP ACL SPEED ALAS ACL ATACK SPEED ABLG ABL GAIN AKBM AKB MODE AKBP AKB PULSE HEIGHT OSDL OSD LIMMIT SELECT UVG UV OFFSET CANCELER ON UOFS U IN OFFSET VOFS V IN OFFSET AALG ANALOG ACL GAIN CONTROL AALS ANALOG ACL ON/OFF CONTROL UVDT UVIN DITHER TEST VMG2 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Common 16:9 YUV Init Data 0 Init Data Init Data Memory Stick Init Data 31 29 31 29 1 1 15 2 0 95 3 0 0 1 0 1 0 1 0 1 0 146 4 0 10 0 0 32 32 0 1 14 35 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS320 SERVICE DATA ASIC Service Group Description Common 16:9 YUV Init Data 0 Init Data Init Data Memory Stick Init Data 6 6 5 5 0 0 Fix/ Var No. Name Fix 30 HFFR Fix 31 Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 32 33 34 35 36 37 38 39 40 41 42 43 Fix 44 VRFL V RAMP FILTER SWITCHING OFF 0 Fix Fix Fix Fix Fix 45 46 47 48 49 XPLU CDM2 BGPC MHDL BFRE 1 1 0 1 0 Fix 50 HRPP ACP TIME CONSTANT V_LOGIC SW BGP C BGP SEL force V FREERUN FRAMP RRAMP H OUT CONTROL RANGE Fix 51 DSCK DS DAC CLK SW for only Not YUV 0 Fix Fix 52 53 VBHK VPW 0 1 Fix 54 DTH Fix 55 SLON Fix 56 VSSW Fix Fix Fix Fix Fix Fix 57 58 59 60 61 62 AF2S VSL2 VSL1 VSHE DSCS 14HI V BLK HALF KILL only 16:9Off V Pulse Wide DITHER THRESHOLD LEVEL CONTROL at IIC AUTOD=ON LPF SYNC ON SYNC SLICE LEVEL(V) Wide Window AFC2 timing SW Digital V_SYNC_LPF(fall) Digital V_SYNC_LPF(rise) V-SHRINK MODE for AV-NoSync CLOCK DIV SEL 4fsc(Skew)CLK POLARITY 0 1 0 0 1 0 Fix 63 14HD 4fscCLK(Skew)CLK DELAY ADJUST 0 AFC1 FORCE FREERUN H FREERUN FREQUENCY HFUP UP(700Hz) JSWW Jump Pulse Width XF0A VCXO FREERUN ADJUST BGST BGP(for PLL) TIMING XPHA VCXO PHASE ADJUST HRMP AFC2 TIME CONSTANT RPLU REF PLL TIME CONSTANT RPLB REF PLL TIME CONSTANT XF0B VCXO Fo ADJUST RPLS REF VCO FB LOOP SELECT SSM SyncSepaMasking CONTROL VSAG V-SAG prevent ON AFC2 AFC2 GAIN CONTROL KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 0 0 0 16 10 3 3 1 0 0 0 0 0 2 0 1 5 0 36 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS320 SERVICE DATA ASIC Service Group Common 16:9 YUV Init Data Init Data Init Data Memory Stick Init Data 12 12 Fix/ Var No. Name Description Fix 63 14HD 4fscCLK(Skew)CLK DELAY ADJUST 1 Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Var Var Var Var Var Var Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 DSI DSD ADCD WSTH WSVA WSCA VREF DCCK HT OSLR OSLG OSDC OSLB HRIL HRIH HGIL HGIH HBIL HBIH HLM1 HLM2 HLM3 HAD1 HAD2 HAKE HASP HERL HLMC HPWL HPWC 1 0 0 0 0 0 0 0 0 27 27 0 27 * * * * * * 4 12 21 2 6 1 3 10 15 4 2 Fix 94 HFMT Fix 95 SPMT Fix Fix Fix 96 97 98 GYG Y16M PCLP 8fscCLK POLARITY 8fscCLK DELAY ADJUST ADC CLK DELAY ADJUST WEAK_SIGNAL VTH WEAK SIGNAL VIDEO ATT WEAK SIGNAL CHROMA ATT AD REFERNCE SELECT(VZ) AD REFERNCE SELECT(VZ) HALF TONE LEVEL R OSD LEVEL G OSD LEVEL OSD COMP B OSD LEVEL H/W AKB RED OUTPUT Lower H/W AKB RED OUTPUT Upper H/W AKB GREEN OUTPUT Lower H/W AKB GREEN OUTPUT Upper H/W AKB BLUE OUTPUT Lower H/W AKB BLUE OUTPUT Upper H/W AKB LIM1 H/W AKB LIM2 H/W AKB LIM3 H/W AKB SPEED1 H/W AKB SPEED2 H/W AKB MANUAL (MCU)/HARD H/W AKB SPEED H/W AKB ERROR DET THRESH H/W AKB ERROR DET TIME H/W AKB POWER ON TRESH H/W AKB POWER ON TIME POWER ON H/W AKB2 HOLD TIMER(@100msec) [ 0 : No Hold ] AKB POWER ON MUTE EXIT TIMER(@100msec) G-Y Gain YUV 16 M Pedestal Clamp KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 20 120 0 1 0 37 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS320 SERVICE DATA Service Group No. Name Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 SBAL SBAS STRE SRL BBOL BBOH BBSL BBSH BBGL BBGH BBTL BBTH VFIX AGCL VCOF Fix/ Var No. Name Var Fix 1 2 DISP CCHP Fix 3 Fix 4 Fix 5 Fix 6 Fix 7 Fix 8 9 Service Group Fix/ Var No. Name MS FIX 1 VERS AUDIO Fix/ Var MICRO Service Group Description Sub Balance Sub Bass Sub Treble Surround Level Surround Off-BBE Low Surround Off-BBE High Simulate BBE Low Simulate BBE High WOW Game BBE Low WOW Game BBE High SRS BBE Low SRS BBE High Audio output fix data AGC level VCOF Description OSD horizontal offset for TILT data calculation Low limit of H-pulse counting window HRLW (RF) High limit of H-pulse counting HRHG wondow (RF) HSDT H-pulse Detection(S-Video) Gradual CONTRAST Increase STPI Starting level Gradual CONTRAST Increase Vsync RAPI counter ZCRD Zero Cross Relay Delay ABL protection counter ABLT Description M.S. Software Version KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Common Init Data 4 0 0 0 3 3 3 3 5 5 0 0 240 2 9 Common Init Data 93 110 16 64 8 40 10 20 3 Common Init Data = 38 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-36FS320 SERVICE DATA Fix/ Var No. Name Description VERSION Fix 0 VER Microprocessor version information Service Group Fix/ Var No. Name Description Var Var Var Var Var Var Var Var Var Var Var Var Var Var Fix Var Fix 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 HSIZ HPOS VSIZ VPOS VLIN SCOR VBOW VANG TRAP PAMP UPIN LPIN TROT HBLK RBLK LBLK VBLK Fix 18 Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 19 20 21 22 23 24 25 26 27 28 29 30 DEF Service Group H SIZE(EW DC) H POSITION V RAMP SIZE V POSITION(RAMP DC) V LINEARITY S CORRECTION BOW ANGLE EW TRAPESIUM EW PIN UPPER PIN LOWER PIN TROT H BLK mode select HBLK rear timing HBLK front timing V BLK width TOP VEND(when HMSK MACROVISION)prevent OFF HDW H PULSE WIDTH(25u/19u) AFC AFC GAIN AFC1 AFC1 TIME CONSTANT AFCW AFC1 PULL IN WIDE CDMD V DET WINDOW SW TIMING HSS SYNC SLICE LEVEL(H sepa) VSS SYNC SLICE LEVEL(V sepa) SLUD Auto Slice level UP/DOWN JPSW Jump SW HOSC H VCO fo offset ADJUST OFFSET EHT EHT EHTG EHT MODE KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Common Init Data = Common Init Data 41 15 28 31 37 39 26 43 28 36 29 30 128 0 21 56 3 = Means same as other register * Means change when tv turn on RF Init Data 36 14 26 32 Composite V Init Data 36 14 26 32 25 51 25 55 7 0 0 1 0 0 1 1 0 3 0 0 3 4 1 39 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-36FS320 SERVICE DATA 16 : 9 Service Group VP1 Service Group Fix/ Var No. Name Description Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 1 2 3 4 5 6 7 8 9 10 11 VSIZ VPOS VLIN SCOR TRAP PAMP UPIN LPIN ABLG SCON VPW V RAMP SIZE V POSITION(RAMP DC) V LINEARITY S CORRECTION EW TRAPESIUM EW PIN UPPER PIN LOWER PIN ABL GAIN SUB CONTRAST LEVEL Jump Pulse Width Common Init Data 36 34 26 28 23 18 31 32 1 10 1 Common RF Composite V YUV Init Data 84 Init Data Init Data Init Data Memory Stick Init Data 74 77 77 73 74 74 Fix/ Var No. Name Description Fix 1 RDRV Var 2 GDRV Var 3 BDRV Var 4 RCUT R DRIVE G DRIVE when Color Temp. is "Cool" and "Neutral" B DRIVE when Color Temp. is "Cool" and "Neutral" Hardware AKB(R) CMP DATA Var 5 GCUT Hardware AKB(G) CMP DATA when Color Temp. is "Cool" and "Neutral" 70 73 73 Var 6 BCUT Hardware AKB(B) CMP DATA when Color Temp. is "Cool" and "Neutral" 56 54 54 Var Var Var Var 7 8 9 10 SCON SHUE SCOL SBRT 7 26 23 1 7 26 23 Fix 11 RON Fix 12 GON Fix 13 BON Fix 14 BLLV Fix 15 MTRX SUB CONTRAST LEVEL SUB TINT(HUE) SUB COLOR LEVEL SUB BRIGHTNESS R OUTPUT ON ( 0:R Output OFF 1:R Output ON ) G OUTPUT ON ( 0:G Output OFF 1:G Output ON ) B OUTPUT ON ( 0:B Output OFF 1:B Output ON ) BLUE STRETCH(00:no <-> 11:deep) only Color Temp "Cool" MATRIX RATIO SELECT KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 100 10 10 9 17 7 10 1 1 1 1 1 40 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-36FS320 SERVICE DATA VP1 Service Group Fix/ Var No. Name Fix 16 AXIS Fix 17 SSHO Fix 18 SSHP Fix 19 SHPF Fix Fix 20 21 SHCL SHMX R-Y PHASE OFFSET SUB SHARPNESS GAIN(OVER) RF/VIDEO SUB SHARPNESS GAIN(PRE) RF/VIDEO SHRPNESS fo(00:2 CLK <-> 11:5 CLK) SHARPNESS CORING LEVEL SHARPNESS LIMITTER LEVEL Fix 22 AKBD AKB Self Diagnostic Counter(@1sec) Fix 23 AKBS Fix 24 REFP Fix Fix 25 26 YNRC BKON Fix 27 BKRC Fix Fix 28 29 BKDP BKSP Description AKB Switch ( 0 : AKB OFF 1 : H/W AKB ON ) AKB REFPLS timing ( "0"Fix when 16:9On ) YNR LIMITER LEVEL BLACK STRETCH ON BLACK STRETCH DETECTOR TIME CONSTANT1 BLACK STRETCH START POINT BLACK STRETCH POINT KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Common RF Composite V YUV Init Data 52 Init Data Init Data Init Data Memory Stick Init Data 3 2 2 3 11 11 13 13 0 1 0 0 1 15 5 1 0 15 1 = = = 41 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-36FS320 SERVICE DATA VP2 Service Group Fix/ Var No. Name Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 1 2 3 4 5 6 7 8 9 10 11 VMOF VMLO VMHI VMDL VMPL VMWD VMCL VMMX CKLV CKON ALFA Fix 12 Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 13 14 15 16 17 18 19 20 21 22 23 24 Fix 25 Fix 26 Fix 27 Fix 28 Fix Fix 29 30 Description VM LEVEL at "Off" Setting VM LEVEL at "Low" Setting VM LEVEL at "High" Setting VM DELAY VM PORALITY VM WIDTH VM CORING LEVEL VM LIMITER LEVEL COLOR KILLER VTH FORCE KILLER ADAPTIVE DET SENSITIVITY YC SEPA FORCE YCMD SELECT(00:ADAPTIVE 01:H 10:V 11:HV) VACL V APERTURE CORING LEVEL VAGA V APERTURE GAIN LEVEL VAMX V APERTURE LIMITER LEVEL GAMM GAMMA(00:no <-->11:deep) YDLY Y DELAY TIME CDLY C DELAY YOFF Y OUTPUT MUTE BGPP BGP(for C DECODER)TIMING NOISE DET VTH1 NRCH NOISE DET VTH1 NRCL NOISE DET VTH1 NRVL NOISE DET VTH1 NRVH G DRIVE OFFSET only Color Temp. GDOF "Warm" B DRIVE OFFSET only Color Temp. BDOF "Warm" GCUT CMP DATA OFFSET only GCOF Color Temp. "Warm" BCUT CMP DATA OFFSET only BCOF Color Temp. "Warm" DCTV DCTRANSFER VTH DCTG DCTRANSFER GAIN KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Common RF Composite V YUV Init Data 2 5 11 Init Data Init Data Init Data Memory Stick Init Data 10 10 6 6 1 0 0 15 1 0 2 0 0 = 15 = 3 2 0 11 3 255 255 255 18 31 2 4 3 = 42 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-36FS320 SERVICE DATA NR Service Group PALETTE Service Group Fix/ Var No. Name Var 1 Fix 2 Fix 3 Fix 4 Fix 5 Fix Fix 6 7 Fix 8 Fix 9 Fix Fix Fix 10 11 12 Fix 13 Fix/ Var No. Name Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 1 2 3 4 5 6 7 8 9 10 11 12 13 14 VPIC VBRI VCOL VHUE VSHA VVM VTRI VAPA VGMA VDCT BKDP BKRC BKSP CONO SCOL SHCL SHMX YNRC VMHI VMCL VMMX VAGA GAMM YNRS WSTH WSVA WSCA Description SUB COLOR LEVEL for NR SHARPNESS NOISE CORING LEVEL for NR SHARPNESS LIMITTER LEVEL for NR YNR LIMITER LEVEL for NR Common Init Data 8 15 7 7 VM LEVEL at "High" Setting for NR 7 VM CORING LEVEL for NR VM LIMITER LEVEL for NR 0 7 V APERTURE GAIN LEVEL for NR 0 GAMMA(00:no <-->11:deep) for NR 0 YNR ON for NR WEAK_SIGNAL VTH for NR WEAK SIGNAL VIDEO ATT for NR WEAK SIGNAL CHROMA ATT for NR 1 7 0 Description Picture Brightness Color Hue Sharpness VM Color Temp Aperture G Gamma DCT LV BLACK STRETCH DEPTH BLACK ST TIME 1 & TIME 2 BLACK STRETCH POINT CONTRAST OFFSET for RF KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 5 VIVID Init Data 63 31 32 31 35 2 0 7 3 12 2 243 3 1 STANDARD Init Data 50 31 31 31 37 1 1 4 2 9 2 243 1 0 MOVIE Init Data 37 28 31 31 34 1 2 3 2 9 1 244 1 0 PRO Init Data 31 31 31 31 31 0 1 0 0 2 1 244 1 0 43 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-36FS320 SERVICE DATA ASIC Service Group Fix/ Var No. Name Description Fix 1 YNRS YNR ON Fix 2 CLPS CLAMP CONTROL SW ( 0:CLAMP OFF 1:CLAMP AUTO 2:CLAMP ON ) Fix 3 Fix 4 Fix 5 Fix Fix Fix Fix Fix Fix Fix Fix 6 7 8 9 10 11 12 13 Fix 14 Fix 15 Fix 16 Fix 17 Fix Fix Fix Fix Fix Fix Fix Var Var Fix Fix Fix 18 19 20 21 22 23 24 25 26 27 28 29 MODULATOR FEEDBACK GAIN CONTROL CLAMP AUTO ON KEEP TIMER CLPT COUNT (@100ms) C DECODER TIME AASL CONSTANT(32,16,8,1H) BASL ACC TIME CONSTANT ACTH ROM HYS AVAV AVE SEL AV B2TH B2COMP AMUT RGB POWER ON MUTE PMUT RGB MUTE(EXCEPT OSD) CORL R CUTOFF lower CORH R CUTOFF upper G CUTOFF lower when Color Temp. COGL is "Cool" and "Neutral" G CUTOFF upper when Color Temp. COGH is "Cool" and "Neutral" B CUTOFF lower when Color Temp. COBL is "Cool" and "Neutral" B CUTOFF upper when Color Temp. COBH is "Cool" and "Neutral" ALSP ACL SPEED ALAS ACL ATACK SPEED ABLG ABL GAIN AKBM AKB MODE AKBP AKB PULSE HEIGHT OSDL OSD LIMMIT SELECT UVG UV OFFSET CANCELER ON UOFS U IN OFFSET VOFS V IN OFFSET AALG ANALOG ACL GAIN CONTROL AALS ANALOG ACL ON/OFF CONTROL UVDT UVIN DITHER TEST VMG2 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Common 16:9 YUV Init Data 0 Init Data Init Data Memory Stick Init Data 27 31 28 33 1 1 15 2 0 95 3 0 0 1 0 1 0 1 0 1 0 146 4 0 10 0 0 32 32 0 1 14 44 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-36FS320 SERVICE DATA ASIC Service Group Description Common 16:9 YUV Init Data 0 Init Data Init Data Memory Stick Init Data 6 6 5 5 0 0 Fix/ Var No. Name Fix 30 HFFR Fix 31 Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 32 33 34 35 36 37 38 39 40 41 42 43 Fix 44 VRFL V RAMP FILTER SWITCHING OFF 0 Fix Fix Fix Fix Fix 45 46 47 48 49 XPLU CDM2 BGPC MHDL BFRE 1 1 0 1 0 Fix 50 HRPP ACP TIME CONSTANT V_LOGIC SW BGP C BGP SEL force V FREERUN FRAMP RRAMP H OUT CONTROL RANGE Fix 51 DSCK DS DAC CLK SW for only Not YUV 0 Fix Fix 52 53 VBHK VPW 0 1 Fix 54 DTH Fix 55 SLON Fix 56 VSSW Fix Fix Fix Fix Fix Fix 57 58 59 60 61 62 AF2S VSL2 VSL1 VSHE DSCS 14HI V BLK HALF KILL only 16:9Off V Pulse Wide DITHER THRESHOLD LEVEL CONTROL at IIC AUTOD=ON LPF SYNC ON SYNC SLICE LEVEL(V) Wide Window AFC2 timing SW Digital V_SYNC_LPF(fall) Digital V_SYNC_LPF(rise) V-SHRINK MODE for AV-NoSync CLOCK DIV SEL 4fsc(Skew)CLK POLARITY 0 1 0 0 1 0 Fix 63 14HD 4fscCLK(Skew)CLK DELAY ADJUST 0 AFC1 FORCE FREERUN H FREERUN FREQUENCY HFUP UP(700Hz) JSWW Jump Pulse Width XF0A VCXO FREERUN ADJUST BGST BGP(for PLL) TIMING XPHA VCXO PHASE ADJUST HRMP AFC2 TIME CONSTANT RPLU REF PLL TIME CONSTANT RPLB REF PLL TIME CONSTANT XF0B VCXO Fo ADJUST RPLS REF VCO FB LOOP SELECT SSM SyncSepaMasking CONTROL VSAG V-SAG prevent ON AFC2 AFC2 GAIN CONTROL KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 0 0 0 16 10 3 3 1 0 0 0 0 0 2 0 1 5 0 45 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-36FS320 SERVICE DATA ASIC Service Group Common 16:9 YUV Init Data Init Data Init Data Memory Stick Init Data 12 12 Fix/ Var No. Name Description Fix 63 14HD 4fscCLK(Skew)CLK DELAY ADJUST 1 Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Var Var Var Var Var Var Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 DSI DSD ADCD WSTH WSVA WSCA VREF DCCK HT OSLR OSLG OSDC OSLB HRIL HRIH HGIL HGIH HBIL HBIH HLM1 HLM2 HLM3 HAD1 HAD2 HAKE HASP HERL HLMC HPWL HPWC 1 0 0 0 0 0 0 0 0 27 27 0 27 * * * * * * 4 12 21 2 6 1 3 10 15 4 2 Fix 94 HFMT Fix 95 SPMT Fix Fix Fix 96 97 98 GYG Y16M PCLP 8fscCLK POLARITY 8fscCLK DELAY ADJUST ADC CLK DELAY ADJUST WEAK_SIGNAL VTH WEAK SIGNAL VIDEO ATT WEAK SIGNAL CHROMA ATT AD REFERNCE SELECT(VZ) AD REFERNCE SELECT(VZ) HALF TONE LEVEL R OSD LEVEL G OSD LEVEL OSD COMP B OSD LEVEL H/W AKB RED OUTPUT Lower H/W AKB RED OUTPUT Upper H/W AKB GREEN OUTPUT Lower H/W AKB GREEN OUTPUT Upper H/W AKB BLUE OUTPUT Lower H/W AKB BLUE OUTPUT Upper H/W AKB LIM1 H/W AKB LIM2 H/W AKB LIM3 H/W AKB SPEED1 H/W AKB SPEED2 H/W AKB MANUAL (MCU)/HARD H/W AKB SPEED H/W AKB ERROR DET THRESH H/W AKB ERROR DET TIME H/W AKB POWER ON TRESH H/W AKB POWER ON TIME POWER ON H/W AKB2 HOLD TIMER(@100msec) [ 0 : No Hold ] AKB POWER ON MUTE EXIT TIMER(@100msec) G-Y Gain YUV 16 M Pedestal Clamp KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 20 120 0 1 0 46 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-36FS320 SERVICE DATA Service Group No. Name Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 SBAL SBAS STRE SRL BBOL BBOH BBSL BBSH BBGL BBGH BBTL BBTH VFIX AGCL VCOF Fix/ Var No. Name Var Fix 1 2 DISP CCHP Fix 3 Fix 4 Fix 5 Fix 6 Fix 7 Fix 8 9 Service Group Fix/ Var No. Name MS FIX 1 VERS AUDIO Fix/ Var MICRO Service Group Description Sub Balance Sub Bass Sub Treble Surround Level Surround Off-BBE Low Surround Off-BBE High Simulate BBE Low Simulate BBE High WOW Game BBE Low WOW Game BBE High SRS BBE Low SRS BBE High Audio output fix data AGC level VCOF Description OSD horizontal offset for TILT data calculation Low limit of H-pulse counting window HRLW (RF) High limit of H-pulse counting HRHG wondow (RF) HSDT H-pulse Detection(S-Video) Gradual CONTRAST Increase STPI Starting level Gradual CONTRAST Increase Vsync RAPI counter ZCRD Zero Cross Relay Delay ABL protection counter ABLT Description M.S. Software Version KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Common Init Data 4 0 0 0 3 3 3 3 5 5 0 0 240 2 9 Common Init Data 93 110 16 64 8 40 10 20 3 Common Init Data = 47 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS120/34FS120 SERVICE DATA Fix/ Var No. Name Description VERSION Fix 0 VER Microprocessor version information Service Group Fix/ Var No. Name Description Var Var Var Var Var Var Var Var Var Var Var Var Var Var Fix Var Fix 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 HSIZ HPOS VSIZ VPOS VLIN SCOR VBOW VANG TRAP PAMP UPIN LPIN TROT HBLK RBLK LBLK VBLK Fix 18 Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 19 20 21 22 23 24 25 26 27 28 29 30 DEF Service Group H SIZE(EW DC) H POSITION V RAMP SIZE V POSITION(RAMP DC) V LINEARITY S CORRECTION BOW ANGLE EW TRAPESIUM EW PIN UPPER PIN LOWER PIN TROT H BLK mode select HBLK rear timing HBLK front timing V BLK width TOP VEND(when HMSK MACROVISION)prevent OFF HDW H PULSE WIDTH(25u/19u) AFC AFC GAIN AFC1 AFC1 TIME CONSTANT AFCW AFC1 PULL IN WIDE CDMD V DET WINDOW SW TIMING HSS SYNC SLICE LEVEL(H sepa) VSS SYNC SLICE LEVEL(V sepa) SLUD Auto Slice level UP/DOWN JPSW Jump SW HOSC H VCO fo offset ADJUST OFFSET EHT EHT EHTG EHT MODE KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Common Init Data = Common Init Data 44 24 29 33 37 45 36 52 22 31 30 31 128 0 23 56 3 = Means same as other register * Means change when tv turn on RF Init Data 43 27 27 35 Composite V Init Data 43 28 27 34 25 53 25 53 7 0 0 1 0 0 1 1 0 3 0 0 3 4 1 48 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS120/34FS120 SERVICE DATA Fix/ Var 16 : 9 Service Group VP1 Service Group Fix/ Var No. Name Description 1 2 3 4 5 6 7 8 9 10 11 VSIZ VPOS VLIN SCOR TRAP PAMP UPIN LPIN ABLG SCON VPW V RAMP SIZE V POSITION(RAMP DC) V LINEARITY S CORRECTION EW TRAPESIUM EW PIN UPPER PIN LOWER PIN ABL GAIN SUB CONTRAST LEVEL Jump Pulse Width Common Init Data 35 39 30 14 19 14 31 32 1 11 1 Common RF Composite V YUV Init Data 84 Init Data Init Data Init Data Memory Stick Init Data 69 68 47 69 67 62 No. Name Description 1 RDRV 2 GDRV 3 BDRV 4 RCUT R DRIVE G DRIVE when Color Temp. is "Cool" and "Neutral" B DRIVE when Color Temp. is "Cool" and "Neutral" Hardware AKB(R) CMP DATA 5 GCUT Hardware AKB(G) CMP DATA when Color Temp. is "Cool" and "Neutral" 73 72 67 6 BCUT Hardware AKB(B) CMP DATA when Color Temp. is "Cool" and "Neutral" 64 58 49 7 8 9 10 SCON SHUE SCOL SBRT SUB CONTRAST LEVEL SUB TINT(HUE) SUB COLOR LEVEL SUB BRIGHTNESS 8 26 22 23 10 16 16 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 100 11 9 7 15 7 9 49 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS120/34FS120 SERVICE DATA VP1 Service Group Fix/ Var No. Name 11 RON 12 GON 13 BON 14 BLLV 15 16 MTRX AXIS 17 SSHO 18 SSHP 19 SHPF 20 21 Description Common RF Composite V YUV Init Data Init Data Init Data Init Data Memory Stick Init Data 3 2 2 12 11 11 13 18 0 1 0 1 SHCL SHMX R OUTPUT ON ( 0:R Output OFF 1:R Output ON ) G OUTPUT ON ( 0:G Output OFF 1:G Output ON ) B OUTPUT ON ( 0:B Output OFF 1:B Output ON ) BLUE STRETCH(00:no <-> 11:deep) only Color Temp "Cool" MATRIX RATIO SELECT R-Y PHASE OFFSET SUB SHARPNESS GAIN(OVER) RF/VIDEO SUB SHARPNESS GAIN(PRE) RF/VIDEO SHRPNESS fo(00:2 CLK <-> 11:5 CLK) SHARPNESS CORING LEVEL SHARPNESS LIMITTER LEVEL 1 15 22 AKBD AKB Self Diagnostic Counter(@1sec) 5 23 AKBS 24 REFP 25 26 YNRC BKON 27 BKRC 28 29 BKDP BKSP AKB Switch ( 0 : AKB OFF 1 : H/W AKB ON ) AKB REFPLS timing ( "0"Fix when 16:9On ) YNR LIMITER LEVEL BLACK STRETCH ON BLACK STRETCH DETECTOR TIME CONSTANT1 BLACK STRETCH START POINT BLACK STRETCH POINT KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 1 1 1 1 1 52 1 0 15 1 = = = 50 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS120/34FS120 SERVICE DATA VP2 Service Group Fix/ Var No. Name 1 2 3 4 5 6 7 8 9 10 11 VMOF VMLO VMHI VMDL VMPL VMWD VMCL VMMX CKLV CKON ALFA 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Description VM LEVEL at "Off" Setting VM LEVEL at "Low" Setting VM LEVEL at "High" Setting VM DELAY VM PORALITY VM WIDTH VM CORING LEVEL VM LIMITER LEVEL COLOR KILLER VTH FORCE KILLER ADAPTIVE DET SENSITIVITY YC SEPA FORCE YCMD SELECT(00:ADAPTIVE 01:H 10:V 11:HV) VACL V APERTURE CORING LEVEL VAGA V APERTURE GAIN LEVEL VAMX V APERTURE LIMITER LEVEL GAMM GAMMA(00:no <-->11:deep) YDLY Y DELAY TIME CDLY C DELAY YOFF Y OUTPUT MUTE BGPP BGP(for C DECODER)TIMING NOISE DET VTH1 NRCH NOISE DET VTH1 NRCL NOISE DET VTH1 NRVL NOISE DET VTH1 NRVH G DRIVE OFFSET only Color Temp. GDOF "Warm" B DRIVE OFFSET only Color Temp. BDOF "Warm" GCUT CMP DATA OFFSET only GCOF Color Temp. "Warm" BCUT CMP DATA OFFSET only BCOF Color Temp. "Warm" DCTV DCTRANSFER VTH DCTG DCTRANSFER GAIN KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Common RF Composite V YUV Init Data 2 5 11 Init Data Init Data Init Data Memory Stick Init Data 10 10 6 6 1 0 0 15 1 0 2 0 0 = 15 = 3 2 0 11 3 255 255 255 18 31 2 4 3 = 51 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS120/34FS120 SERVICE DATA Fix/ Var No. 1 NR Service Group 2 3 4 5 6 7 8 9 10 11 12 13 PALETTE Service Group Description Name SCOL SHCL SHMX YNRC VMHI VMCL VMMX VAGA GAMM YNRS WSTH WSVA WSCA Fix/ Var No. Name Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 1 2 3 4 5 6 7 8 9 10 11 12 13 14 VPIC VBRI VCOL VHUE VSHA VVM VTRI VAPA VGMA VDCT BKDP BKRC BKSP CONO SUB COLOR LEVEL for NR SHARPNESS NOISE CORING LEVEL for NR SHARPNESS LIMITTER LEVEL for NR YNR LIMITER LEVEL for NR VM LEVEL at "High" Setting for NR VM CORING LEVEL for NR VM LIMITER LEVEL for NR V APERTURE GAIN LEVEL for NR GAMMA(00:no <-->11:deep) for NR YNR ON for NR WEAK_SIGNAL VTH for NR WEAK SIGNAL VIDEO ATT for NR WEAK SIGNAL CHROMA ATT for NR Description Picture Brightness Color Hue Sharpness VM Color Temp Aperture G Gamma DCT LV BLACK STRETCH DEPTH BLACK ST TIME 1 & TIME 2 BLACK STRETCH POINT CONTRAST OFFSET for RF KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Common Init Data 7 15 7 7 7 0 7 0 0 1 7 0 5 VIVID Init Data 63 31 32 31 35 2 0 7 3 12 2 243 3 1 STANDARD Init Data 50 31 31 31 37 1 1 4 2 9 2 243 1 0 MOVIE Init Data 37 28 31 31 34 1 2 3 2 9 1 244 1 0 PRO Init Data 31 31 31 31 31 0 1 0 0 2 1 244 1 0 52 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS120/34FS120 SERVICE DATA ASIC Service Group Fix/ Var No. Name Fix 1 YNRS YNR ON Fix 2 CLPS CLAMP CONTROL SW ( 0:CLAMP OFF 1:CLAMP AUTO 2:CLAMP ON ) 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Description MODULATOR FEEDBACK GAIN CONTROL CLAMP AUTO ON KEEP TIMER CLPT COUNT (@100ms) C DECODER TIME AASL CONSTANT(32,16,8,1H) BASL ACC TIME CONSTANT ACTH ROM HYS AVAV AVE SEL AV B2TH B2COMP AMUT RGB POWER ON MUTE PMUT RGB MUTE(EXCEPT OSD) CORL R CUTOFF lower CORH R CUTOFF upper G CUTOFF lower when Color Temp. COGL is "Cool" and "Neutral" G CUTOFF upper when Color Temp. COGH is "Cool" and "Neutral" B CUTOFF lower when Color Temp. is COBL "Cool" and "Neutral" B CUTOFF upper when Color Temp. COBH is "Cool" and "Neutral" ALSP ACL SPEED ALAS ACL ATACK SPEED ABLG ABL GAIN AKBM AKB MODE AKBP AKB PULSE HEIGHT OSDL OSD LIMMIT SELECT UVG UV OFFSET CANCELER ON UOFS U IN OFFSET VOFS V IN OFFSET AALG ANALOG ACL GAIN CONTROL AALS ANALOG ACL ON/OFF CONTROL UVDT UVIN DITHER TEST VMG2 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Common Init Data 0 16:9 Init Data YUV Init Data Memory Stick Init Data 39 35 32 32 1 1 15 2 0 95 3 0 0 1 0 1 0 1 0 1 0 146 4 0 10 0 0 32 32 0 1 14 53 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS120/34FS120 SERVICE DATA ASIC Service Group Fix/ Var No. Name 30 HFFR Description 57 58 59 60 61 62 AFC1 FORCE FREERUN H FREERUN FREQUENCY HFUP UP(700Hz) JSWW Jump Pulse Width XF0A VCXO FREERUN ADJUST BGST BGP(for PLL) TIMING XPHA VCXO PHASE ADJUST HRMP AFC2 TIME CONSTANT RPLU REF PLL TIME CONSTANT RPLB REF PLL TIME CONSTANT XF0B VCXO Fo ADJUST RPLS REF VCO FB LOOP SELECT SSM SyncSepaMasking CONTROL VSAG V-SAG prevent ON AFC2 AFC2 GAIN CONTROL VRFL V RAMP FILTER SWITCHING OFF XPLU ACP TIME CONSTANT CDM2 V_LOGIC SW BGPC BGP C MHDL BGP SEL BFRE force V FREERUN FRAMP RRAMP H OUT CONTROL HRPP RANGE DSCK DS DAC CLK SW for only Not YUV VBHK V BLK HALF KILL only 16:9Off VPW V Pulse Wide DITHER THRESHOLD LEVEL DTH CONTROL at IIC AUTOD=ON SLON LPF SYNC ON SYNC SLICE LEVEL(V) Wide VSSW Window AF2S AFC2 timing SW VSL2 Digital V_SYNC_LPF(fall) VSL1 Digital V_SYNC_LPF(rise) VSHE V-SHRINK MODE for AV-NoSync DSCS CLOCK DIV SEL 14HI 4fsc(Skew)CLK POLARITY 63 14HD 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 4fscCLK(Skew)CLK DELAY ADJUST KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Common Init Data 0 16:9 Init Data YUV Init Data Memory Stick Init Data 6 16 5 5 0 0 0 0 0 16 10 3 3 1 0 0 0 0 0 0 1 1 0 1 0 2 0 0 1 0 1 5 0 0 1 0 0 1 1 0 54 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS120/34FS120 SERVICE DATA ASIC Service Group Fix/ Var No. Name 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 DSI DSD ADCD WSTH WSVA WSCA VREF DCCK HT OSLR OSLG OSDC OSLB HRIL HRIH HGIL HGIH HBIL HBIH HLM1 HLM2 HLM3 HAD1 HAD2 HAKE HASP HERL HLMC HPWL HPWC 94 HFMT 95 SPMT 96 97 98 GYG Y16M PCLP Description 8fscCLK POLARITY 8fscCLK DELAY ADJUST ADC CLK DELAY ADJUST WEAK_SIGNAL VTH WEAK SIGNAL VIDEO ATT WEAK SIGNAL CHROMA ATT AD REFERNCE SELECT(VZ) AD REFERNCE SELECT(VZ) HALF TONE LEVEL R OSD LEVEL G OSD LEVEL OSD COMP B OSD LEVEL H/W AKB RED OUTPUT Lower H/W AKB RED OUTPUT Upper H/W AKB GREEN OUTPUT Lower H/W AKB GREEN OUTPUT Upper H/W AKB BLUE OUTPUT Lower H/W AKB BLUE OUTPUT Upper H/W AKB LIM1 H/W AKB LIM2 H/W AKB LIM3 H/W AKB SPEED1 H/W AKB SPEED2 H/W AKB MANUAL (MCU)/HARD H/W AKB SPEED H/W AKB ERROR DET THRESH H/W AKB ERROR DET TIME H/W AKB POWER ON TRESH H/W AKB POWER ON TIME POWER ON H/W AKB2 HOLD TIMER(@100msec) [ 0 : No Hold ] AKB POWER ON MUTE EXIT TIMER(@100msec) G-Y Gain YUV 16 M Pedestal Clamp KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Common Init Data 1 0 0 0 0 0 0 0 0 27 27 0 27 4 1 15 1 231 0 4 12 21 2 6 1 3 10 15 4 2 16:9 Init Data RF Init Data Composite V Init Data 12 12 20 120 0 1 0 55 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-32FS120/34FS120 SERVICE DATA AUDIO Service Group MICRO Service Group Fix/ Var No. Name Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix Fix 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 SBAL SBAS STRE SRL BBOL BBOH BBSL BBSH BBGL BBGH BBTL BBTH VFIX AGCL VCOF Fix/ Var No. Name Description Var Fix 1 2 DISP CCHP Fix 3 HRLW Fix 4 HRHG Fix 5 HSDT Fix 6 STPI Fix 7 RAPI Fix 8 9 ZCRD ABLT OSD horizontal offset for TILT data calculation Low limit of H-pulse counting window (RF) High limit of H-pulse counting wondow (RF) H-pulse Detection(S-Video) Gradual CONTRAST Increase Starting level Gradual CONTRAST Increase Vsync counter Zero Cross Relay Delay ABL protection counter Service Group Fix/ Var No. Name MS FIX 1 VERS Description Sub Balance Sub Bass Sub Treble Surround Level Surround Off-BBE Low Surround Off-BBE High Simulate BBE Low Simulate BBE High WOW Game BBE Low WOW Game BBE High SRS BBE Low SRS BBE High Audio output fix data AGC level VCOF Description M.S. Software Version KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Common Init Data 4 0 0 0 3 3 3 3 0 0 3 3 240 2 9 Common Init Data 101 110 16 64 8 40 10 20 3 Common Init Data = 56 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 KV-36FS120/38FS120 SERVICE DATA (DATA NOT AVAILABLE) 4-5. ID MAP TABLE Model KV-27FS320 KV-27FS320 KV-32FS120 KV-32FS120 KV-32FS320 KV-32FS320 KV-34FS120 KV-34FS120 KV-36FS120 KV-36FS120 KV-36FS120 KV-36FS320 KV-36FS320 KV-36FS320 KV-38FS120 Destination ID-O ID-1 ID-2 ID-3 ID-4 ID-5 ID-6 ID-7 US CND US CND US CND L NORTH L SOUTH US CND HAWAII US CND HAWAII L NORTH 89 89 89 89 89 89 81 81 89 89 89 89 89 89 81 63 63 15 15 63 63 15 15 15 15 15 63 63 63 15 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 231 231 199 199 231 231 199 199 199 199 199 231 231 231 199 32 48 32 48 32 48 128 128 32 48 32 32 48 32 128 0 0 8 8 0 0 16 16 8 8 8 0 0 0 16 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 32 32 0 0 0 0 0 0 32 4 4 4 4 4 4 68 68 4 4 4 4 4 4 68 57 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 4-6. A BOARD ADJUSTMENTS Display Position Adjustment (DISP) H. Frequency (Free Run) Check 1. 2. 3. 4. Input a color-bar signal. Set to Service Adjustment Mode. Select DISP with 1 and 4 . Adjust values of DISP with 3 and 6 to adjust characters to the center. 5. Press MUTING then ENTER to save into the memory. 6. Check to see if the text is displayed on the screen. 1. Input a TV mode (RF) with no signal. 2. Connect a frequency counter to base of Q501 (TP-25 H. DRIVE) on the A Board. 3. Check H. Frequency for 15735 ± 200 Hz. V. Frequency (Free Run) Check 1. Select video 1 with no signal input. 2. Set the conditions for a standard setting. 3. Connect the frequency counter to TP-27 (V OUT) or CN501 pin 6 (V DY+) and ground on the A Board . 4. Check that V. Frequency shows 60 ± 4 Hz. Mode Category service micro Signal Type Drive (SCON) 1. 2. 3. 4. Input a color-bar signal and set the level to 75%. Set in Pro mode + PICTURE MAX. Activate the Service Adjustment Mode. Set GON and BON items. Using 3 and 6 set each to the following values. Leave RON set to “1”. Mode Signal Type Category service video Display Item rdrv Item Data 26 ntsc vchp 00000000 00000000 R ON: G ON: B ON: ON OFF OFF (1) (0) (0) 5. Connect an oscilloscope probe to C Board, CN705 pin3 (KR). 6. Select SCON with 1 and 4 . 7. Adjust the value of SCON with 3 and 6 for 92 ± 2Vpp. Display Item disp Item Data 48 ntsc vchp 00000000 00000000 Sub Bright Adjustment (SBRT) 1. 2. 3. 4. 5. Input a monoscope signal. Activate the Service Adjustment Mode. Set the PICTURE and BRIGHTNESS to minimum. Select the SBRT item with 1 and 4 . Adjust the values of SBRT with 3 and 6 to obtain a faintly visible 20 IRE mark, after that increase +3 steps. 6. Press MUTING then ENTER to save into the memory. Sub Hue, Sub Color Adjustment (SHUE, SCOL) 1. 2. 3. 4. 5. 6. Input color-bar signal at 75%. Activate the Service Adjustment Mode. Set (PIC) to Max and (COL) to 50%. Connect an oscilloscope probe to C Board, CN705 pin 4 (Blue Out). Select the SHUE and SCOL item with 1 and 4 . While showing the SHUE item, adjust the waveform with 3 and 6 until the second and third bars show the same level (V2 = V3 < 0.15Vp-p). Set Sub Hue -2 Step. 7. While showing the SCOL item, adjust the waveform with 3 and 6 until the first and fourth bars show the same level (V1 = V4 < 0.15Vp-p). Set Sub Col + 2 Step. V1 V2 V3 V4 92 + 2Vpp 8. Press MUTING then ENTER to save into the memory. 8. Reset GON and BON values to “1”. R ON: ON G ON: ON B ON: ON (1) (1) (1) 9. Press MUTING then ENTER to save into the memory. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 58 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 V. Size Adjustment (VSIZ) 1. 2. 3. 4. 5. Input a crosshatch signal. Activate the Service Adjustment Mode. Select the VSIZ item with 1 and 4 . Adjust value of VSIZ with 3 and 6 for the best vertical size. Press MUTING then ENTER to save into the memory. V. Linearity (VLIN), V. Correction (SCOR), PIN Amp (PAMP), and Horizontal Trapezoid (HTRP) Adjustments 1. 2. 3. 4. 5. Input a crosshatch signal. Activate the Service Adjustment Mode. Select VLIN, SCOR, PAMP, and HTRP with with 1 and 4 . Adjust with 3 and 6 for the best horizontal size. Press MUTING then ENTER to save into the memory. V LINEARITY (VLIN) V. Center Adjustment (VPOS) Perform this adjustment after performing H. Frequency (Free Run) Check. 1. Input a crosshatch signal. 2. Activate the Service Adjustment Mode. 3. Select the VPOS item with 1 and 4 . 4. Adjust value of VPOS with 3 and 6 for the best vertical center. 5. Press MUTING then ENTER to save into the memory. V CORRECTION (SCOR) PIN AMP (PAMP) HORIZONTAL TRAPEZOID (HTRP) H. Center Adjustment (HPOS) Perform this adjustment after performing H. Frequency (Free Run) Check. 1. Input a crosshatch signal. 2. Activate the Service Adjustment Mode. 3. Select the HPOS item with 1 and 4 . 4. Adjust the value of HPOS with 3 and 6 for the best horizontal center. 5. Press MUTING then ENTER to save into the memory. H. Size Adjustment (HSIZ) 1. 2. 3. 4. 5. Input a monoscope signal. Activate the Service Adjustment Mode. Select HSIZ with 1 and 4 . Adjust with 3 and 6 for the best horizontal size. Press MUTING then ENTER to save into the memory. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 59 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 V. Angle (VANG), V. Bow (VBOW), Upper PIN (UPIN) and Low PIN (LPIN) Adjustments 1. 2. 3. 4. 5. Input a crosshatch signal. Activate the Service Adjustment Mode. Select VANG, VBOW, UPIN, and LPIN with 1 and 4 . Adjust with 3 and 6 for the best picture. Press MUTING then ENTER to save into the memory. V ANGLE (VANG) V BOW (VBOW) UPPER PIN (UPIN) LOW PIN (LPIN) Service Adjustment Mode Memory 1. After completing all adjustments, press 0 then ENTER . Read From Memory Mode Category service Signal Type defl Item Data Display Item vbow 7 Green 0 ntsc Red vchp 00000000 00000000 ENTER KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 60 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 SECTION 5: DIAGRAMS 5-1. CIRCUIT BOARDS LOCATION KV-27FS320 Pictured C Board V Board The components identified by shading and ! symbol are critical for safety. Replace only with part number specified. The symbol indicates a fast operating fuse and is displayed on the component side of the board. Replace only with fuse of the same rating as marked. All voltages are in V. S : Measurement impossibillity. : B+line. : B-line. (Actual measured value may be different). : signal path. (RF) Circled numbers are waveform references. The components identified by X in this basic schematic diagram have been carefully factory-selected for each set in order to satisfy HM Board (KV-27FS320/ regulations regarding X-ray radiation. Should HN Board replacement be necessary, replace only with 32FS320/ (KV-27FS320/ 36FS320 Only) the value originally used. HR Board (KV-27FS320/ 32FS320/ M Board A Board 36FS320 Only) HU Board 32FS320/ (KV-27FS320/32FS320/36FS320 Only) 36FS320 Only) HS Board (KV-32FS120/34FS120/36FS120/38FS120 Only) When replacing components identified by Y, make the necessary adjustments as indicated. If the results do not meet the specified value, change the component identified by X and repeat the adjustment until the specified value is achieved. 5-2. PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM INFORMATION All capacitors are in µF unless otherwise noted. pF : µµF 50WV or less are not indicated except for electrolytics and tantalums. (Refer to Section 3: Safety Related Adjustments on Page 27.) All electrolytics are in 50V unless otherwise specified. All resistors are in ohms. k=1000, M=1000k Indication of resistance, which does not have one for rating electrical power, is as follows: Pitch : 5mm Rating electrical power : 1 / 4 W in resistance, 1/10 W and 1/ 8 W in chip resistance. : nonflammable resistor. : fusible resistor. : internal component. : panel designation and adjustment for repair. When replacing the parts listed in the table below, it is important to perform the related adjustments. Part Replaced (Y) C531, C532, D519, D520, D521, IC501, IC600, PH602, R529, R530, R531, R532, R533, R550, T503 (FBT), T504 (DFT) Adjustment (X) HV HOLD-DOWN R530, R531 : earth ground : earth-chassis All variable and adjustable resistors have characteristic curve B, unless otherwise noted. Readings are taken with a color-bar signal input. Readings are taken with a 10M digital multimeter. Voltages are DC with respect to ground unless otherwise noted. Voltage variations may be noted due to normal production tolerances. REFERENCE INFORMATION RESISTOR : RN METAL FILM : RC SOLID : FPRD NONFLAMMABLE CARBON : FUSE NONFLAMMABLE FUSIBLE : RW NONFLAMMABLE WIREWOUND : RS NONFLAMMABLE METAL OXIDE : RB NONFLAMMABLE CEMENT : ADJUSTMENT RESISTOR CAPACITOR : TA TANTALUM : PS STYROL : PP POLYPROPYLENE : PT MYLAR : MPS METALIZED POLYESTER : MPP METALIZED POLYPROPYLENE : ALB BIPOLAR : ALT HIGH TEMPERATURE : ALR HIGH RIPPLE COIL : LF-8L MICRO INDUCTOR KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 61 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 5.3. BLOCK DIAGRAM AND SCHEMATICS IIC Comunic ation Picture Signal Sound S ignal Tuning Related Control Lines Antena Switch Tilt Rotation VM Power Main Tuner ($C0) Power FBT Key CRT Front MS Module Panel Keys H-Out Menu Keys DY V-Out IR IO-SDA T O-SCLKN IO-BDA T O-BCLKN I-POWERN M24C16 ($A0,$A2 ,$A4 , I-MENU I-KE Y O-LED Stand by / Timer Led I-RMCN Receiver RGB YUV SW O-MSSW Amp Monitor Out I-AFT2 $A6,$A8 ,$A A) Video 5 I-AFT Reset YUV SW O-AGCMUT E Video Processor/Comb Fil ter O-ANTSW I-SA P ($??) Video 4 I-ST EREN O-MONO 5V Regulator Micro O-SAP Video 3 M65582MF- XX XFP I-RES ET 5V S tand-by ($60) O-SEL0 O-SEL1 Video SW Video 2 9V Regulator I-HLDWN O-NS Energy Star I-MEC SVD Low B VCC Video 1 O-MUTE Main Power Supply O-DGC 12.5V O-RELAYN Rec tifier Mechanical S-Video Audio Rectifier 14 V Audio Inpu ts B+ Recti fier AC Line Audio 115V KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 Degaus s SW Out Audio Ou tputs Audio Proc es s or NJ M1134 Mute Audio Amp . TDA8580Q ($82) 62 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 A BOARD SCHEMATIC DIAGRAM (1 OF 2) A BOARD WAVEFORMS 5 | 6 D307 PDZ9.1B-115 D200 MTZJ-T-77-9.1B | 12 | 13 | 14 | 15 | 16 8 9 10 11 15 16 20 R403 100 :CHIP R84 0.47 1/4W -2 Q401 2SD601AMUTE JR445 R D424 MA111-TX E R464 22k C612 100 13 14 15 VCCR GNDR 12 16 SPKR+ SPKR- 11 INR2 10 N/C MODE1 SVR SGND 9 -2 17 -2 20 | 21 | 22 -2 C451 CN401 4P -2 D400 MA111-TX R488 2.2k -2 C480 -2 L -2 R467 22k :CHIP C466 -2 -2 C661 47 FB613 1.1UH Q467 2SB709A MUTE C467 -2 R475 47k :CHIP -2 C374 * Y-YUV 40 GND 39 U-YUV 38 GND 37 V-YUV 36 GND 35 O-SEL1 34 IO-SDAT 33 I-ABL-ACL 32 IO-SCLK 31 O-AGC MUTE 30 I-AFT 29 9V 28 9V 27 GND 5V SET I-SAP 22 O-SAP 21 O-MONO 20 GND 19 GND 18 O-TMUTE Q468 2SB709A MUTE Q470 2SB709A MUTE R482 10k :CHIP -2 17 DGC Z-DET Q472 2SD601-Q MUTE Q471 2SD601-Q MUTE R480 100 :CHIP DGC -2 C473 -2 R483 2.2k :CHIP R485 100 :CHIP -2 -2 O-RELAY 15 Z-DET 14 STBY7.5 13 VM 12 EW-OUT 11 V+RAMP 10 V-RAMP +9V I-PROT 7 O-MUTE I-HP 4 O-RIGHT2 3 GND 2 O-LEFT-2 1 GND 5 4 6 VCC V1 3 7 OUT S0 8 J206 * G S1 GND TUNER 48.1V p-p (H) 7 8 52.8V p-p (V) 28.2V p-p (V) 1169mV p-p (H) 9 0.5V p-p (V) 52.8V p-p (V) 10 281.5V p-p (H) 9V TO M BOARD C512 470p :CHIP CN3000 STAND-BY R544 1k :CHIP R541 47k :CHIP Q582 2SD601A I-HP R542 10k :CHIP D508 MA111-TX IC302 NJM2534M VIDEO SW — 6 CN100 50P :B TO B TV-VID V3 5 212.5V p-p (H) HOUT 5 C476 — 2.6V p-p (H) I-HOLDOWN 8 6 3 2 O-DGC 16 9 D651 MTZJ-T-77 -6.2B TV-VID 41 23 C472 -2 GND 24 :CHIP -2 VIDEO 42 GND R481 0 :CHIP 1 GND 43 I-HSYNC Q469 2SB709A MUTE R474 22k :CHIP O-SEL0 25 +9V R469 22k :CHIP 45 26 +9V | 4 SPKL+ C468 -2 GND SPKL- R484 10k 1/4W :CHIP R473 22k :CHIP Y-YC 46 SPKR- -2 R471 22k :CHIP GND 47 4 TO-H/S401 Q466 2SB709A MUTE 48 3 R R470 22k :CHIP C-YC 2 R406 10 R458 100 GND 49 44 23 2.14V p-p (H) 50 SPKR+ -2 C458 0.1 :CHIP | 1 C461 22 R468 22k :CHIP R661 680 D418 0 Q412 2SD601AMUTE R478 10k 1/10W C470 470 16V 8 -2 D218 ZENER 9.1 2 F | C450 R450 10k :CCHIP -2 R466 22k :CHIP Q611 KSC2383-0 5V REG D414 MTZJ-T 77-7.5B 19 AUD_VCC C463 D213 DIN54-TA2 R477 680 1/10W 7 R457 100 1 — 6 C456 0.1 :CHIP R416 4.7k R479 1k 1/10W 5 R234 220 :CHIP R233 470k 1/16W Q403 2SD601A-QRS-TX MUTE 4 R472 100k 1/4W R463 0 D219 ZENER 9.1 C213 4.7 Q402 2SD601A-QRS-TX MUTE 3 -2 INL2 2 INR1 1 INL1 D425 UDZSTE-177.5B R429 47k SPKL- JR444 VCCL IC400 NJW1134AGK1-TE2 AUDIO PROCESSOR GND 19 R424 1k :CHIP MODE2 C417 1000p :CHIP R235 220 :CHIP R408 2.2k | IC401 TDA8947J AUDIO AMP 9V SPKL+ V+ 9V D422 100 :CHIP D R405 2.2k 18 +9V Q405 2SC2412K MUTE R425 1.5k :CHIP 21 VREF CBS 18 22 SCL CTL 17 23 SDA 24 CVB CRS CTH OUT-B 14 25 CVA 13 26 AGC 12 OUT-A TONE-LB LINEB TONE-HB TONE-HA BBE2B MONB BBE1B SRSFIL2 7 C401 22000p :CHIP 27 C415 1.0 R401 100 :CHIP 6 BBE1A IN5B 5 28 +5V — | PS401 18V J207 2P C212 4.7 17 L C422 47 16V GNDL 1.0 1.0 4.7 R411 10 1/4W C420 2.2 C412 29 C416 680pF 0.47 C408 C410 30 C418 0.033 C406 31 C414 1.0 3300p C404 32 C413 1.0 4 33 C411 0.33 3 34 LINEA 2 35 TONE-LA 1 36 Q005 2SD601A-QRS-TX AGC R232 470k :CHIP | SCL C409 0.47 — R210 220 :CHIP 11 16V TV-R DET OUT Q300 2SB709A BUFFER 37 BBE2A TP102 38 SRS/SS C362 C202 0.1 16V | SDAT C403 3300p C405 16V 0.033 C407 680pF R089 4.7k 1/16W 39 IN6B R OUT L OUT C400 0.33 :CHIP IN1A 5V TP603 R207 100k :CHIP 9V 40 MONA R301 100 :CHIP R208 220 1/4W :CHIP D201 MTZJ-T-77-9.1B 10 D423 MA111-TX 5V C402 8200p :CHIP R400 4.7k :CHIP IN5A C056 C367 0.1 16V C203 0.1 :CHIP | TV-VID R422 6.8k :CHIP IN3B R086 33k :CHIP R209 100k :CHIP 9 R220 220 :CHIP R206 220 :CHIP C081 0.33 10V B | TV-L R302 470 R085 15k D210 MTZJ-T-77-9.1B IN4B 1 R218 100k :CHIP IN4A R303 560 C054 R202 220 1/10W C052 4700p :CHIP C053 0.1 16V :CHIP C055 100 NC F MONO C080 0.33 10V B TV-VID D009 MTZJ-T-77 -30D NC C201 0.1 16V C207 0.1 :CHIP 8 D305 PDZ9.1B-115 D209 MTZJ-T-77-9.1B C200 0.1 16V D405 MA111-TX R087 22k 1/10W :CHIP L009 MUTE SAP IND MODE DET OUT DET OUT2 ST IND AFT OUT GND L003 C049 10 TP602 9V B 9V RF AGC R107 100 :CHIP R099 100 1/10W :CHIP RF-AGC | R391 75 :CHIP R219 220 1/16W :CHIP C206 0.1 :CHIP R217 100k :CHIP 7 C309 0.1 16V R393 75 :CHIP IN2B C050 470 16V C051 100 16V 6.3V | C1 | IN1B L004 R108 100 VIF AS SDA 5V 30V 9V TP100 C059 0.1 16V :CHIP C 4 TU001 — — | TUNER STEREO A 3 IN6A | IN3A 2 IN2A | SCL 1 -15V L503 10mmH :HCC J205 * 4 H L501 10mmH :HCC 2 T505 * 3 5 C518 1 1 TP99 -15V D530 R576 22 R536 0.47 1/2W C C537 470 25V 1 CN202 * HV 1 GND S501 10 200V 4 +30V JR332 * R932 75 :CHIP R953 75 R316 * R934 75 :CHIP C310 * 16V 7 R521 * D320 * 6 IC303 * YUV SW R514 10k :CHIP 5 11 12 C057 3 2 4 13 C373 * T501 :HDT D551 UDZS-5.6B R513 47k :CHIP 3 Q501 2SC3209LK H-DRIVE 6 C506 0.047 FB505 0UH PIN C511 * C1501 * D500 C554 * C513 * 2 L502 2.2mH :LHL08 R509 1.0k :FPRD +12V R546 * R315 * C366 D306 UDZSTE-9.1B D402 UDZSTE-179.1B D321 * — C208 0.1 :CHIP R222 100k :CHIP R402 * D401 UDZSTE-179.1B TP89 C534 47 3 — 1 R369 0 :CHIP 4 2 8 R533 47k R359 10k :CHIP R1511 10k :CHIP 1 R1510 10k :CHIP D308 UDZS-TE-10B V1 M L1 * 6 5 2 3 4 D522 MA111-TX R531 * C532 22 J201 D521 MTZJ-T-77 7.5X R1 C365 100p 500V B R528 22k :CHIP R525 8.2k :CHIP 8 6 R567 2.2 :FPRD 7 TP94 JL501 R590 10k :CHIP CN706 CN503 7P 10 +15V 7 9 6 R551 4.7k R549 2.2k 1/4W R569 10k ;CHIP 5 8 R543 0.47 4 -15V L517 2.2mH 3 7 2 C545 1 TP96 TP52 D561 1N4003GA V-BOOST TH501 C529 22 25V IC501 NJM2903M-TE2 PIN-CONTROL R529 22k 1/16W :CHIP V DRIVE C547 * C546 * R580 100k :CHIP R586 100k :CHIP TP85 C531 22 R530 12k 1/16W :CHIP D589 MA111-TX R583 4.7k :CHIP Q564 2SD601A OCP C563 220 25V R532 120 :CHIP 135V R570 10k :CHIP Q561 2SD601A NECK-PROT D590 MA111-TX R572 10k :CHIP R599 2.2k :CHIP O-RELAY R597 0 R2 C535 :CHIP R595 330k O-RELAY R598 6.8k :CHIP +9V +12V H.DY H.DY V.DY V.DY 1 H.DY(+) 2 H.DY(+) 3 H.DY(-) 4 H.DY(-) 5 V.DY(-) 6 V.DY(+) 9 D588 MA111-TX R334 100 :CHIP R328 10k :CHIP D580 1SS133T -77 Q531 2SB709A OCP LATCH R500 220 :CHIP R573 22k :CHIP R592 0.33 1W C590 10 25V -15V HOLD-DOWN +12V C588 R571 10k :CHIP R593 * B+ Q530 2SD601A OCP-LATCH Q562 2SB709A I-PROT NC GND HEATER CN501 6P WHT :DY H.PROT R589 4.7k :CHIP 200V R550 0.47 -15V D519 EL1Z-V1 H.PRT DF TO C BOARD 11 TP94 200V R568 6.8k :CHIP C568 0.22 :MPS R563 1.8 DRIVE+ 5 R559 47 :CHIP D518 MA111-TX 1 10 D525 MA111-TX N 4 C561 47 R565 330 R574 1.8 R584 10k L2 3 R523 * D516 MA111-TX C530 0.0022 50V :CHIP 2 OUT AF C-P R524 10k 1/10W 1 C565 220 R566 6.8k :CHIP D520 MA111-TX V2 — 7 D526 MA111-TX C368 R394 75 :CHIP C526 22 250V FB502 0UH D535 MA111-TX VCC+ R224 220 D211 UDZSTE-9.1B C528 0.0022 :CHIP VCC- L R225 100k :CHIP Q512 2SC4159-E PIN OUT C525 220p E/W DRIVE +B C209 0.1 :CHIP C519 220p R519 330 R518 10k :CHIP R516 JW 5.0MM R223 220 :CHIP D212 UDZSTE-9.1B R517 680 Q511 2SC2412K-T-146 PIN DRIVE 13 R553 0.47 200V R547 10k L505 * 7 VCC- R410 * REF C421 * VCC+ R414 * 5 12 R548 22k IC561 * VOUT 6 R561 10k DRIVE- C423 * R404 * R367 0 :CHIP FB503 0UH D515 PR1004GT PIN-OUT H D534 H.DY(+) C516 * 1 16 K R390 75 :CHIP L511 8mmH R506 47 C522 1.0 C312 * V3 C520 3300p 500V R545 3.3 :FPRD CN505 1P FV C540 100 160V C541 22 100V R538 220k C539 470mF 25V R510 33 C515 0.001 C553 D323 * R537 0.47 1/2W SV C517 2.2 250V +12V — CN1802 6 D531 C514 * D504 2 C314 * T503 * TO V BOARD R520 100 3W :RS R512 220 3W :RS D503 C527 680p 2kV B C510 0.01 100V :PT FB501 0UH Q502 2SD2645-YB H-OUT C505 470p C504 470p 3 C509 680p 2kV B R507 47 R503 4.7k R502 4.7k C503 470p :CHIP C507 680p 2kV B 4 B+ 7 5 4 5 C502 0.47 4 R508 10k 1/10W :CHIP 1 D509 MA111-TX 14 D322 * Q583 2SB709AQRS-TX H-OUT C523 C315 * 15 J D319 * D318 * JR335 * 10 R317 * C308 * D311 * 8 S502 R552 * JR334 * 8 — D309 * D325 * 9 I 3 D506 GP08D PKG23 R504 * C307 * D324 * D310 * D505 GP08D PKG23 9 T502 :PMT V.DRIVE — Q304 2SD601A-QRS-TX VM OUT R335 1k :CHIP R594 10k Q532 KTA1279 OCP LATCH R564 470k A-BOARD R596 100k :CHIP TUNER/IF TUNING CONTROL DEFLECTION — AUDIO 9V TO-V-BOARD 8 9 VM VP 7 HP 6 5 9V 9V 4 2 3 GND GND B+ — NC 1 O 9-965-964-01<BA6L>A-P1 CN502 9P TO-CN901 P KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 63 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 A BOARD SCHEMATIC DIAGRAM (2 OF 2) 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | C600 * | C690 50V C622 1000p FB650 0UH 20 | 21 | 22 | 23 JW608 * C620 0.01 25V R687 0.47 T605 LFT D628 MA111-TX RY501 B R625 1/10W C633 0.001 50V VD VSENSE NC F/B CC CT 4 — R631 15k NC 2 DGC 1 D501 MA111-TX C581 0.22 275V C635 4.7 50V DGC VS RT VB GND 8 THP501 * Q509 2SD601A DGC DRIVE VG SS R659 10 1/4W B P-GND VCI C647 47 25V VC2 OCP Q600 IRFIB7N50A CONVERTER C648 1000p 1kV R660 10k 1/10W C651 * DGC - R607 10k :CHIP D646 R610 MA111-TX 10k 1/10W R694 22k 1/10W Z-DET Q606 2SD601A-QR ZERO DET R613 10k 1/10W R608 10k 1/10W + R611 10k 1/10W D602 S1B60-4062 1 18 D611 D4SBL20UF3 B+ C617 33 160V C604 680p 500V Q601 IRFIB7N50A CONVERTER 3 +14V 14V 15 5 14 9V 9V C670 680p 500V L606 D621 MA6D50 9V 9V REG C632 2200 L609 14V 16 4 IC609 PQ09RD21 9V REG 14V D614 EZ0150AV1 17 C649 1000p 1kV 135V L608 FB604 0UH D618 UF4005PKG2 3 R670 10k 1/10W R671 0.1 2W R672 0.1 2W D631 10ERB20-TA1B2 C642 220 50V R648 0 :CHIP 3 PH602 ON3171-R R619 0.47 1/4W R616 1.2k 1/10W IC600 MCZ3001DB CONVERTER G R606 10k :CHIP L600 5.0mm C658 4700p 250V C609 680p 500V T604 PIT C672 47000p S C602 10000p R647 91 L515 9 FB602 0UH C643 0.1 50V R632 100 R534 10k 1/10W 3 C656 4700p 250V D641 MA111-TX S 9 F C645 0.001 50V NC TIMER C637 0.1 50V R535 2.2k 1/10W 8 FB616 0UH FB617 0UH R658 10 1/4W 10 3 6 DGC C634 10 50V 7 DGC 5 CN508 3P 2 R630 470k R640 1k 1/4W 3 D629 UDZSTE-1712B R627 5MM 2 470 D R629 470k Q690 2SB709A-QR SW STAND-BY 4 R626 8.2k 18 1 C608 0.001 D612 * 17 R674 0.47 1/2W FB653 0UH 3 D600 D4SB60L-F D613 * R628 470k 7 D620 MA111-TX Q691 2SA933AS STBY PWR SW D640 MA111-TX 16 2 CN601 * GND RY600 FH2 JW609 * C621 * 1 15 F601 * C619 * C614 * C629 * 1 FH1 — C603 0.22 275V FB652 0UH 2 AC IN R688 0.22 275V R612 470k 14 C601 1 AC IN C VDR600 * CN600 2P 1 AC IN R603 * 4 — R699 * R615 0.1 1/2W C615 * 13 FB651 0UH C613 * D645 10ERB20-TA1B2 C616 2200 25V FB609 5MM I R609 1 R641 1 3W RS G 2 4 L605 6 13 O 7 12 8 11 9 10 R617 1k 1/10W 1 5 4 3 1 14V 2 CN 3 GND R668 470 1/4W 1 L604 C650 1000 -2 R620 10 1W AUD_VCC 18V R667 10k 1/10W C652 10000p :CHIP R681 2.2k :CHIP FB607 5.0MM O-RELAY R618 0 — D615 D4SBL20UF3 FB606 5.0MM HN BOARD CN201 * C669 680p 500V IC601 DM-58 ERROR AMP TO CN1601 C638 2200 12 R686 0.22 R691 22k 1/10W D690 MTZJ-T-77-27 T603 * 11 B — 19 R692 22k 1/10W D647 10ERB20-TA1B2 — — | Q605 2SD774-T-3 SW A E 18 Q608 2SD2144S-T MAIN RELAY SW C653 R604 1.0k :CHIP 50V H R650 100k — A-BOARD TO-H/S-Q600 POWER SUPPLY I R651 100k FB614 0UH TO-H/S-Q601 — J 9-965-964-01<BA6L>A-P2 — A BOARD IC VOLTAGE LIST IC302 PIN VOLT 1 4.5 2 0.3 3 4.5 4 0.4 5 4.5 6 9.0 7 4.4 8 GND IC303 PIN VOLT 1 4.5 2 4.0 3 3.0 4 GND 5 4.0 6 4.0 7 0.0 8 4.5 9 4.5 10 GND 11 4.5 12 0.0 13 9V 14 4.5 15 GND 16 4.5 IC400 PIN VOLT 1 4.5 2 4.5 3 4.5 4 4.5 5 4.5 6 4.5 7 4.5 8 4.5 9 4.5 10 4.5 11 4.5 12 4.5 13 4.5 14 4.5 15 0.6 16 1.7 17 1.7 18 4.7 19 4.7 20 GND 21 9.0 22 4.4 23 3.8 24 3.8 25 4.0 26 0.6 27 28 29 30 31 32 33 34 35 36 37 38 39 40 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.5 4.5 4.5 4.5 4.5 4.5 IC401 PIN VOLT 1 8.3 2 GND 3 19.6 4 8.3 5 19.6 6 3.2 7 0.0 8 0.0 9 3.2 10 9.1 11 9.7 12 3.2 A BOARD TRANSISTOR VOLTAGE LIST 13 14 15 16 17 3.3 8.3 GND 19.6 8.3 IC501 PIN VOLT 1 -13.3 2 8.2 3 7.2 4 -15.0 5 2.3 6 2.5 7 -13.5 8 12.0 IC561 PIN VOLT 1 1.5 2 12.0 3 -12.0 4 -15.0 5 0.3 6 14.2 7 1.4 IC600 PIN VOLT 1 2.5 2 1.8 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 2.2 2.5 GND 0.0 4.0 17.2 GND 10.4 0.0 4.6 N/C 163.6 153.5 157.6 N/C 340.0 IC601 PIN VOLT 1 133.7 2 N/C 3 2.5 4 11.3 5 GND IC609 PIN VOLT I 14.0 O 9.0 G GND Q005 Q300 Q304 Q401 Q402 Q403 Q405 Q412 Q466 Q467 Q468 Q469 Q470 Q471 Q472 Q501 Q502 B 0.1 4.6 5.0 0.0 0.0 0.0 0.7 0.7 4.8 4.8 4.8 4.8 8.8 0.0 0.0 0.0 0.0 C 4.9 GND 9.0 18.2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.9 18.2 123.6 131.8 E GND 5.2 4.4 0.0 GND GND GND GND 4.8 4.8 4.8 4.8 8.8 0.0 GND GND 0.0 Q600 Q601 D 313.0 155.0 G 160.0 4.9 S 156.0 0.0 Q509 Q511 Q512 Q530 Q531 Q532 Q561 Q562 Q564 Q582 Q583 Q605 Q606 Q608 Q611 Q690 Q691 B 0.0 -13.5 -14.9 0.0 4.4 133.6 0.0 0.0 0.0 0.0 9.0 7.6 0.0 0.0 5.6 6.1 6.9 C 11.1 -8.4 -2.0 4.4 0.0 0.0 4.4 0.0 0.0 7.7 -1.9 18.8 0.5 6.7 9.0 0.5 7.6 E GND -15.0 -15.0 GND 4.4 133.8 GND GND GND GND 8.8 7.6 GND GND 5.0 5.9 7.6 All voltages are in V. All voltages are in V. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 64 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 A [TUNER/IF, TUNING CONTROL, DEFLECTION, AUDIO, POWER SUPPLY, ] COMPONENT SIDE CONDUCTOR SIDE 3 4 5 6 7 C507 R507 C509 N HOLD DOW +12V GND - 15V NC 200V CN505 R536 R553 D534 C547 R537 D218 R548 R565 JL17 8 JW D530 C365 C531 9 JW D219 C522 13 JW C310 20 JW 19 JW C560 J 205 C314 C308 1- 862- 321- 11 27 JW J 206 C366 J 203 15 JW 17 JW 201 JW 16 JW D310 HS561 C307 22 JW R567 R561 14 JW R519 R517 37 JW 21 JW 28 JW 38 JW 40 JW J 201 41 JW 45 JW 46 JW 47 JW 48 JW 49 JW 50 JW 79 JW 81 JW 80 JW L004 30 JW D009 73 JW Q611 66 JW 65 JW 83 JW C415 405 JW 85 JW 87 JW 90 JW 89 JW SCL SDA 82 JW R403 409 JW 404 JW 9V GND 75 JW 12 JW 76 JW 77 JW 611 JW M UTE HEATER R538 H. DY( +) H. DY( +) R547 CN501 V. DY( - ) R520 R546 H. DY( - ) H. DY( - ) V. DY( +) D506 C518 L501 R576 11 JW EY551 EY552 C519 53 JW R516 501 JW 93 JW 145 JW 144 JW 63 JW S- GND LCH 62 JW D409 64 JW 98 JW RCH 147 JW 146 JW R584 C412 17 I C401 1 94 JW 97 JW - EY511 FB501 EY510 C510 55 JW C534 B+ NC GND GND HP 9V VP VM 125 JW 102 JW R411 488 JW R472 16 2 86 JW FH1 FH2 T601 J 3 AUDI O VCC F601 4 FB612 FB611 CN602 F601 AC I N FB610 CN202 FB613 CN600 C505 C504 C502 C514 FB503 D521 C472 C461 C480 R506 R509 C515 107 JW 108 JW 114 JW SPR+ 415 JW 412 JW Q608 CN508 EY506 VDR600 R600 6 JW 5 JW 111 JW HS609 GND SPR- GND 14V SPL- SPL+ C653 B HOT EY507 THP501 EY503 EY505 1 EY610 C601 EY602 EY601 FB612 EY607 + T501 R552 132 JW R592 131 JW 110 JW C670 FB609 C669 + 119 JW 120 JW 121 JW 122 JW E R674 EY616 EY615 EY568 L606 L605 HS621 FB607 113 JW D615 - D645 D647 HS401 D600 R686 C506 COLD C635 C634 C633 118 JW HOT EY627 R687 EY625 127 JW EY656 EY567 FB604 HOT R619 C637 R627 R629 C611 EY628 R688 EY626 609 JW EY655 115 JW C649 R659 116 JW HS601 G R615 R630 C604 EY637 S HS600 Q600 FB617 FB616 R628 + D612 - EY606 T602 R600 C601 C600 00 R6 VD EY603 FB652 2 1 C607 AU VCC 4 - AC I N CN600 EY605 D600 R686 C581 CN508 L515 CN603 EY604 R687 + 128 JW R688 R674 D629 B THP501 C450 FB613 EY608 D640 D602 T603 E DGC J R444 JR445 R450 UTE M SDA GND 3 D641 R694 D647 C611 608 JW C629 R630 D646 R606 D620 R692 C650 R534 R681 R535 FB652 R621 C620 R626 C651 R607 D645 R691 R604 C653 JR16 R469 T602 D612 R628 R627 Q690 R611 R613 Q606 Q467 R480 R455 IC401 C456 2 FB616 FB617 R615 R629 C633 R625 R648 C634 C635 SPKL+ C469 R461 FB650 2 RCH 1 LCH S- GND CN412 C451 6 9V CN601 R459 R698 CN411 C081 DGC C459 C471 D409 3 1 C080 FB653 C608 R457 FB651 PS401 31 21 SPKL- HS401 16 17 R456 R458 R460 15 11 C060 D410 C455 C622 R462 C460 R202 R206 D405 SCL 6 R403 R422 R099 C415 R301 C301 C200 1 R401 C411 C403 R303 RY501 D501 FB614 C413 C201 R087 Q509 R472 D423 D422 C417 C603 R468 C480 R464 D400 C461 D424 IC400 21 C409 C407 C405 C401 R089 R108 SPKR- SPKR+ R481 R335 R328 R411 R599 C416 R400 C406 C404 C402 C410 C408 EY609 C621 HS600 Q600 G R659 R660 D617 C645 C637 14V GND GND C472 D551 Q304 Q531 Q530 C414 C412 J R401 JR402 JR403 R584 R586 Q564 R587 D589 R531 D525 D522 R1510 R302 D615 L609 VM VP R500 R597 D590 J R9 T605 S D610 D609 R632 FB607 C669 FB609 R483 R485 Q472 Q405 D508 R542 Q582 R572 D588 R589 R1511 T601 R650 C648 R651 R619 JR620 C670 D425 R429 HP 9V 9V GND C512 R541 R544 R571 R569 R554 R515 R1535 M +B D520 D521 R523 Q561 R555 C521 R359 B EY102 R471 R470 R474 R488 E L C458 Q608 Q401 R84 D213 D651 R661 C053 C058 C056 Q611 Q300 74 JW GND NC D516 C533 C591 R573 IC501 R518 R334 C612 1 C590 R533 C530 C528 C534 R567 R545 R561 K C422 D628 R473 C1454 C420 40 R086 Q005 R107 L003 C661 6 R467 R406 R425 C463 C418 C613 C614 R463 20 R088 11 R598 C619 RY600 R466 JR405 1 1 L604 C467 Q469 R508 C535 D601 Q466 Q468 2 C051 J J R10 C656 C615 C466 C473 R475 CN502 R530 D526 4 1 R596 R612 R603 C468 R564 1 CN604 R609 R484 IC302 C049 15 E L600 1 Q470 R594 49 L009 21 HS621 C515 Q512 R517 R519 R558 R559 J R502 J R501 R516 50 4 D009 I HS609 R509 FB503 C519 Q511 C522 R576 R568 R1515 R566 C560 JR3 D318 R529 C563 CN100 C052 31 3 E B D690 R6 99 C658 CN401 R482 9 R570 C565 5 TUNER H Q691 Q471 Q562 C532 TU001 TUNER R595 1 C400 74 JW EY103 L605 L606 T502 T505 L503 R506 R520 C518 D506 R565 R528 E TU001 G FB604 R602 C654 D509 R514 C502 L501 CN501 D319 D325 D309 C057 D324 JR335 D320 D561 C529 R532 E B Q605 C616 R548 R478 HS561 C373 C055 GUI DE D613 R610 C625 C632 D580 Q532 D535 1 PRESS CN601 C649 1 61 HS R592 R527 C523 Q583 C516 R547 C531 R590 CN411 F C506 R513 C514 L502 R546 NC 200V GND 6 2 CN604 EY101 R618 JR621 G B R525 C374 8 C367 R393 C309 I C661 R933 E R208 R661 B J R4 CN202 R209 EY100 E D651 R479 D FB610 C362 7 1 R574 C054 EY600 FB611 C050 J R332 C050 CN602 JL16 C054 C588 C476 1 C049 C312 6 C450 JW 68 C051 C314 600 JW CN603 EY104 JW 72 C055 D317 C600 L003 L009 D219 JW 406 D213 JL11 71 JW R524 D518 FB502 R583 C059 2. 7A C612 HS512 R394 C362 PS401 EY110 R84 H R369 JW 601 69 JW R220 R210 J L14 70 JW C413 C202 29 JW 50 C525 C366 D308 403 JW C451 J W 408 D306 C207 D200 49 EY106 2 C526 C368 C607 C 1 R563 R367 D305 B C476 CN100 EY201 D515 1 R219 L004 A BA6L ' 04 EY202 31 JW EY105 CN412 414 JW FH1 32 JW 39 JW R224 R390 EY629 PH602 C690 R641 C561 D307 J FH2 1- 862- 321- 11 407 JW EY203 33 JW J L10 D321 C568 TH501 C307 R392 1 R698 EY204 C368 34 JW R512 IC303 D211 R391 I JL15 R217 D201 REPLACE FUSE ARKED AS M 6. 3A R545 35 JW C206 R225 C203 RI SK OF FI RE L515 26 JW JL12 C416 1 25 JW 36 JW O R085 B I C561 D310 3 C561 4 1 R616 R620 CN201 R424 8 J R334 413 JW JW 95 C414 24 JW C373 I R593 D505 C308 R932 R398 C420 C422 42 JW G J 201 EY504 FB651 D410 60 JW C418 C622 EY614 2 C608 TH501 L51 1 S502 C470 R934 EY205 3 2 EY630 R617 D621 C520 C553 V. DY( - ) R477 R953 EY206 R207 EY613 100 JW D561 C208 D210 FB650 FB614 23 JW 58 JW 59 JW R574 JW 521 C565 EY207 R696 HS615 IC609 H. DY( - ) D323 R223 R404 R222 R410 R414 C423 D209 H C463 EY208 R235 R234 D311 18 JW 52 JW 51 JW R317 C312 2 6 I C561 EY209 J 203 EY611 FB653 J L9 RY501 1 7 EY560 S501 C315 R402 C209 EY612 C588 H. DY( - ) V. DY( +) Q412 C310 C533 R563 D519 D414 R408 R218 3 C568 C532 124 JW EY502 C315 R512 54 JW F EY210 Q403 C421 R405 J 206 416 JW S501 Q512 C563 EY211 D418 D322 JL8 C213 7 C475 C212 D402 57 JW EY212 J205 103 JW HS512 JL13 1 C470 L505 H. DY( +) D531 D212 CN502 9 10 JW D414 R631 9 R667 C638 R549 J 207 R510 H. DY( +) C537 C212 J L20 FB502 134 JW D531 C517 C541 CN503 R550 R543 D316 R316 R596 R543 C537 C475 S502 C539 C545 E D218 C529 R564 B C546 C213 E L517 C539 D505 C545 D401 D580 B J L7 141 JW C553 R550 C546 D315 EY617 EY558 L511 D519 18 1 D607 C652 C1501 C554 EY559 1 J 207 R594 EY557 C525 D515 Q532 603 JW C520 C526 105 JW C468 R406 C581 L503 EY556 R315 G 142 JW JW 503 1 J R1 EY501 C603 T505 JW 504 7 R416 EY621 R593 R484 L604 EY527 106 JW E 123 JW - 4 1 RY600 EY618 EY526 R551 R233 EY622 C614 EY620 EY619 R595 C590 JL5 C467 1 EY525 R551 R232 F JL6 EY524 R085 C632 + 5 JL4 4 EY623 C613 EY559 I IC600 C627 R608 CN503 Q402 T603 EY554 D 7 JW 9 FB606 DF - 15V CN401 EY555 O L609 C466 L502 10 IC601 D503 HEATER C650 EY624 R609 R510 L505 C517 C541 D631 T604 R553 COLD CN201 EY534 JL19 C628 C602 C513 D530 R641 C1501 EY553 3 1 604 JW EY660 C554 EY560 G D504 C511 T503 EY549 1- 862- 321- 11 EY631 R640 C643 R668 D503 109 JW I C609 C R537 D690 FBT EY515 EY516 L517 C619 B E EY517 EY516 +12V Q691 L600 C513 EY532 EY531 D500 EY517 EY515 EY546 EY545 N HOLD- DOW 138 JW C509 EY514 - 15V R536 137 JW HEATER EY632 R658 D618 R647 JR130 Q501 E R503 C527 EY513 200V GND EY544 R670 R672 C642 B EY518 EY514 1 R671 C503 GND EY518 R549 C615 13 4 R502 +15V C527 EY543 EY528 C638 B+( 135V) EY519 C365 129 JW 12 G S 18 C647 EY523 C547 130 JW Q605 DF EY519 EY513 Q601 C609 C617 C510 D621 R539 N/ C EY523 EY538 C516 C625 B E EY521 B CN505 C658 C656 E 11 HS601 C672 - L608 C C EY512 EY520 R503 EY550 C616 EY659 EY512 EY520 4 JW J L2 T502 ABL EY521 C511 JL3 EY657 C D500 EY645 EY658 9 10 FB602 R580 EY522 D534 C690 EY522 Q502 B D504 C523 EY644 117 JW D601 9 11 D6 D614 C504 136 JW 133 JW B E T604 R620 R603 8 + C505 R668 HDT I C601 2 T503 GND R538 1 FBT E 135 JW HS615 R504 A FB505 R521 3 D613 6 7 R552 9 EY662 EY646 PH602 R612 6 T501 4 C617 EY661 EY633 9 9 6 R 5 B I C600 1 FB606 D 4 R507 D631 C642 7 3 Q502 EY642 C647 C651 2 HOUT EY647 10 C643 EY634 EY629 1 E EY641 R672 D618 18 C 13 FB501 EY648 Q601 R640 EY630 12 FB505 C507 09 5 EY EY638 FB602 R671 8 11 R504 2 JW L608 8 50 EY G EY640 EY639 1 JW EY536 D614 EY649 C609 S R658 EY650 J L1 EY636 EY635 EY631 C629 10 C604 C648 9 C621 EY651 0 4 5 C HS 61 1 EY652 D611 C672 EY632 9 Q501 A- 1302- 981- A A 8 BAR CODE R533 2 9V 1 B [TUNER/IF, TUNING CONTROL, DEFLECTION, AUDIO, POWER SUPPLY, ] C 5 4 0 A T605 A BOARD LOCATOR LIST (CONDUCTOR SIDE) DIODE D009 D200 D201 D209 D210 D211 D212 D213 D218 D219 D305 D306 D307 D308 D309 D310 D311 D318 D319 D320 D321 D322 D323 D324 D325 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 DIODE I-3 H-1 I-1 H-2 G-2 G-2 F-2 I-5 F-2 F-2 I-2 H-2 I-2 H-2 G-3 G-2 F-2 F-3 G-3 G-3 F-2 F-2 F-3 G-3 G-3 D400 D401 D402 D405 D414 D418 D422 D423 D424 D425 D500 D501 D503 D504 D505 D506 D508 D509 D515 D516 D518 D519 D520 G-8 F-2 F-2 J-5 F-3 F-2 G-8 G-8 G-8 F-8 C-4 G-10 C-4 C-5 F-4 F-4 G-8 G-6 F-6 F-7 F-6 E-3 G-7 DIODE D521 D522 D525 D526 D530 D531 D534 D535 D551 D561 D580 D588 D589 D590 D600 D602 D611 D612 D613 D614 D615 D618 G-7 H-6 H-6 H-6 E-2 E-2 D-3 G-6 G-8 G-5 F-7 G-7 H-6 G-7 F-12 E-11 A-7 B-13 D-13 A-7 D-9 B-10 DIODE D620 D621 D628 D629 D631 D640 D641 D645 D646 D647 D651 D690 D-11 D-8 F-10 G-10 B-9 D-11 D-11 D-11 D-11 E-11 I-5 E-10 IC IC302 IC303 IC400 IC401 IC501 IC561 IC600 IC601 IC609 TRANSISTOR I-2 G-3 I-7 I-9 G-6 G-5 C-10 C-7 D-8 Q005 Q300 Q304 Q401 Q402 Q403 Q405 Q412 Q466 Q467 Q468 Q469 Q470 Q471 Q472 Q501 Q502 Q509 Q511 Q512 I-3 J-4 G-8 G-8 F-2 F-1 F-8 F-3 F-9 F-9 F-8 F-8 F-9 F-8 F-8 B-6 B-4 G-10 F-5 F-6 TRANSISTOR Q530 Q531 Q532 Q561 Q562 Q564 Q582 Q583 Q600 Q601 Q605 Q606 Q608 Q611 Q690 Q691 G-7 G-8 F-7 G-6 G-7 G-6 G-7 C-6 A-10 A-11 D-10 D-10 F-10 I-5 D-10 D-10 65 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 HM BOARD SCHEMATIC DIAGRAM (1 OF 4) (KV-27FS320/32FS320/36FS320 ONLY) Due to the complexity of this board, performing component level field repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 VEE AVEE ADVEE TDMDX — VDD A B VEE — 113 YUV6/VDAC 114 YUV7 115 DCS0 100 DCS1 97 DRAS0 72 DMBS0 73 DMBS1 74 DCAS 69 DWE 71 DCKE/DOE 70 DQM 101 DSCK 102 LA17 19 LA17 LA18 20 LA18 LA19 21 LA19 22 LA20 23 LA21 178 LD0 179 LD1 LD2 180 LD2 LD3 181 LD3 LD4 182 LD4 185 LD5 LD6 186 LD6 LD7 187 LD7 188 LD8 189 LD9 190 LD10 LD11 191 LD11 LD12 194 LD12 195 LD13 196 LD14 197 LD15 145 HRST/AUX3(5) 150 HRD/AUX4(6) 149 HWR/AUX4(5) 143 HRDQ/AUX4(0) 142 HWRQ/AUX4(1) 146 — 151 152 153 144 J 154 155 158 122 HD0 R1433 33 1/16W :CHIP 123 124 125 R1460 0 1/16W:CHIP 126 127 128 131 132 133 134 135 136 DMA4 DMA5 DMA6 61 DMA6 DMA7 62 DMA7 DMA8 63 DMA8 DMA9 64 DMA9 DMA10 65 DMA10 DMA11 66 DMA11 DB0 77 DB0 DB1 78 DB1 DB2 79 DB2 DB3 80 DB3 DB4 81 DB4 DB5 82 DB5 AUX4 HD5/AUX1(5) AUX5 HD6/VFD_DOUT/AUX1(6) AUX6 HD7/VFD_DIN/AUX1(7) AUX7 HD8/VFD_CLK/AUX2(0) XIN HD9/AUX2(2) XOUT HD10/AUX2(2) HD11/AUX2(3) IC1310(5/7) ES6425FF 1 DB7 87 DB8 88 DB9 89 DB10 90 DB11 93 DB12 94 DB13 95 DB14 96 DB15 R1455 100 1/16W :CHIP C1374 0.1 16V B:1608 C1375 10 16V R1454 10k 1/16W :CHIP AUX0 Q1304 2SK2036 R1456 100 1/16W :CHIP 33 D1313 DAP202K 1/16W:CHIP R1404 1 165 4 3 166 6 5 8 7 50 R1453 10k 1/16W :CHIP D1312 DAN202K 2 49 2 VEE R1403 160 169 EMI 33 1/16W:CHIP AUX2 AUX1 Q1305 2SK2036 AUX3 AUX4 RB1421 AUX7 XIN XOUT HM BOARD 1/4 NC VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS HD15/IR/AUX2(7) VSS HD14/AUX2(6) VSS HD13/AUX2(5) VSS ADVSS HD12/AUX2(4) DB6 R1458 167 0 1/16W:CHIP R1459 168 0 1/16W:CHIP FL1309 EMI FILTER :CHIP DB(0-15) 86 R1401 0 1/16W:CHIP VEE C1331 10 16V C1334 0.1 16V B:1608 3 85 162 C1339 0.1 16V B:1608 DMA(0-11) 2 EMI 3 R1461 33 1/16W:CHIP 58 AUX3/IOR HD4/AUX1(4) DSCK0 DMA5 AUX2/IOW HD3/AUX1(3) DCKE DMA3 161 1 DQM 57 AUX1/I2C_CLK HD2/AUX1(2) FL1307 EMI FILTER :CHIP VEE 56 AUX0/I2C_DATA HD1/AUX1(1) VEE DWE DMA4 DB15 R1352 390 1/16W :RN-CP DBANK1 DMA3 DB14 HD0/AUX1(0) C1333 0.1 16V B:1608 DCAS DMA2 DB13 HA2/EAUX4(4) R1383 4.7k 1/16W :CHIP DBANK0 55 DB12 HA1/EAUX4(3) R1376 4.7k 1/16W :CHIP DRAS0 DMA2 DB11 HA0/EAUX4(2) R1382 4.7k 1/16W :CHIP DCS0 DMA1 DB10 AVSS 141 HIRQ/AUX4(4) R1345 0 1/16W YDAC DMA0 DB9 IC1310(2/7) ES6425FF CDAC 54 DB8 NCC NCC 140 HCS3FX/AUX3(6) C1387 0.1 16V B:1608 UDAC 53 DB7 HCS1FX/AUX3(7) R1375 4.7k 1/16W :CHIP SPDIF DMA1 DB6 HIOCS16/AUX3(4) TSD2 DMA0 HIORDY/AUX3(3) NCC 137 IC1310(1/7) ES6425FF TSD1 ADVEE LA16 IC1310(6/7) ES6425FF TDMDX TSD0 AVEE 16 LA12 TWS/SEL_PLL2 S LA15 LA16 I VCC 15 LD15 VCC LA14 LA15 LD8 VCC LA13 14 LD14 — 110 YUV5/YDAC LA11 13 LD13 L YUV4/RSET LA10 LA14 LD10 — 109 LA13 LD9 K 108 YUV3/COMP LD1 LD(8-14) — YUV2/CDAC LA9 12 LD5 — 107 LD0 G H YUV1/VREF LA8 IC1310(7/7) ES6425FF LA0 LA12 LA20 — 106 LA7 VCC 11 YUV0/UDAC VCC LD(0-7) LA11 118 LA6 VCC F 10 VSYNC/AUX3(1) VCC — 7 LA10 119 LA5 VEE LA9 117 HSYNC/AUX3(0) VEE 6 PCLKQSCN/AUX3(2) LA4 VEE LA8 LA3 VEE 5 116 VEE LA7 PCLK2XSCN VEE 4 41 LA2 VEE LA6 SPDIF/SEL_PLL3 VEE 3 45 LA1 VEE LA5 46 RSD VEE 2 47 RWS LOE VEE LA4 38 RBCK VEE 207 NC LWRHL VEE LA3 LWRLL VEE 206 205 37 LCS3 VEE E LA2 TSD2 TSD2 LSC2 VEE — 204 36 LCS1 VEE D LA0 LA1 TSD1/SEL_PLL1 LSC1 AVEE 170 LOE — 198 199 LA(1-20) TSD0/SEL_PLL0 LCS0 ADVEE WRLL 176 MCLK TWS TDMCLK — 175 TSD1 39 MCLK TBCK TDMFS 33 LCS3 174 35 44 83 121139172 RESET TDMDR R1434 1/16W :CHIP 173 18 27 59 68 75 92 99 1041301481571591641831932019 R1387 40 33 1/16W :CHIP TBCK R1371 32 33 1/16W :CHIP TWS R1389 33 33 1/16W :CHIP TDMDX/RSEL R1426 4.7k 1/16W :CHIP 31 25 28 30 29 11151 1 CLK TDMTSC C 24 S RST ADVEE D1314 DTZ10B 105 :CHIP R1379 4.7k 1/16W :CHIP TSD0 MPEG DECODER 42 20220352 1128 17 26 34 43 60 67 76 84 91 98 10312012913814715616317117718419220020848 IC1310(3/7) ES6425FF IC1310(4/7) ES6425FF M — N 9-965-964-01<BA6L>HM-P1 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 66 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 HM BOARD SCHEMATIC DIAGRAM (2 OF 4) (KV-27FS320/32FS320/36FS320 ONLY) Due to the complexity of this board, performing component level field repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 A — B — C — LA(1-20) 48 47 46 45 DQ5 41 DQ6 40 42 DQ7 39 44 DQ8 38 30 A11 DQ9 37 DQ10 DQ11 A14 DQ12 1 2 A6 RB1413 9 DMA5 MA5 LA10 5 6 7 A8 10 3 4 6 A9 1 2 5 A10 LA11 MA7 LA12 6 3 A12 3 4 2 A13 1 2 1 LA18 5 6 17 3 4 16 LA19 LA20 1 LCS3 RB1407 10 DB0 7 8 MB0 DB1 5 6 MB1 DB2 3 4 MB2 DB3 1 2 MB3 R1420 33 1/16W :CHIP LOE WRLL 9 10 26 28 11 LD12 41 LD13 LD14 DQ13 DQ14 45 13 VEE 14 VEE A17 A18 A19 WP A20 RY/BY VPP WORD 37 OE GND 46 WE GND 27 VEE C1328 0.1 16V B:1608 VEE VEE IC1311 IS42S16400B -7TL-TR MA10 22 L — 15 39 DQMX BANK0 BANK1 BANK1 MB0 2 MB1 4 5 54 50 WE VCCQ 9 DQML VCCQ DQMH VCCQ BA0 VSSQ 21 40 MB2 3 20 36 CKE 39 DQMX 38 CAS 27 37 14 16 LA0 R1351 0 1/16W :CHIP R1348 0 1/16W :CHIP C1346 0.1 16V B:1608 WORD BYTE VEE 14 36 R1363 33 1/16W :CHIP R1369 33 1/16W :CHIP 15 BANK0 16 2 VCCQ 17 RAS 17 1 WE VCC 18 C1351 0.1 16V B:1608 1 43 49 6 VSSQ 12 VSSQ VSSQ BA1 NC NC 31 DCKE WE VCC 53 MB15 52 DQ0 VSS 30 DBANK1 6 VCC CS 51 MB14 28 DQ1 VSS 29 — 5 CAS DQ15 50 MB13 41 DQ2 VSS 28 DQM R1357 33 1/16W :CHIP 8 CLK CKE 19 RAS0 CAS DQ14 18 DBANK0 7 RAS0 DQ13 A11 48 19 DWE 4 37 CKE CS0 MB12 A10 21 DCAS 3 38 MB11 A9 20 CS0 DCS0 DRAS0 K DSCK0 47 A8 22 — MA11 35 R1355 33 1/16W :CHIP DQ12 A7 23 RB1419 DQ11 53 MA9 34 52 MA8 33 MB15 MB10 A6 41 MB14 DB15 45 A5 40 DB14 DQ10 1 MA7 32 MB9 2 MB13 MB8 44 3 DB13 DQ9 4 MA6 31 5 MB12 MB7 42 6 DB12 DQ8 MB6 13 A4 7 MA5 30 DQ7 MB5 11 A3 8 MA4 29 RB1404 10 DQ6 MB4 10 A2 9 MA3 26 MB3 8 24 MB11 DB11 DQ5 7 10 MA2 25 DQ4 A1 25 MB10 DQ3 A0 11 MA1 24 13 MA0 23 26 MB9 27 MB8 DB9 12 RB1405 10 DB8 C1361 0.1 16V B:1608 MB(0-15) 51 MA(0-11) 49 MB7 48 2 47 1 C1362 0.1 16V B:1608 46 DB7 C1330 0.1 16V B:1608 45 MB6 44 4 43 3 42 MB5 DB6 35 MB4 6 34 8 5 33 7 DB5 32 DB4 DB10 LD11 15 VDD CE RB1418 43 A16 DQ15/A-1 LD9 R1421 33 1/16W :CHIP RB1406 10 — 2 R1422 33 1/16W :CHIP RB1420 R1391 10 1/16W :CHIP A15 LD8 39 29 48 LD(8-14) LD7 36 28 8 LD6 RB1417 LD10 27 7 LD3 34 26 LA17 16 LA16 15 5 LA15 RB1416 32 25 MA11 LA14 LD5 17 MA10 DMA11 4 LD4 40 18 DMA10 VEE R1314 4.7k 1/16W :CHIP 8 38 19 MA9 7 35 20 VEE LA13 LD2 33 21 MA8 RB1412 13 MA6 DMA7 14 DMA6 12 8 11 18 LD1 44 19 LD0 43 4 :CHIP 42 3 A5 33 1/16W 36 A4 R1424 31 35 20 8 DB(0-15) J A7 6 7 MB(0-15) — DQ4 5 LA9 — I DQ3 LA6 MA4 DMA9 H DQ2 21 DMA4 DMA8 — DQ1 8 LA8 RB1409 10 F A3 7 22 — 29 LD(0-7) RB1415 34 RB1408 10 DQ0 33 MA3 A2 LA5 LA7 E G 22 RST BYTE 32 2 23 2 47 BYTE 31 1 DMA3 4 1 RB1411 LA4 12 A1 R1423 33 1/16W :CHIP 30 4 3 LA3 1 3 MA2 RESET A0 2 MA1 24 3 6 25 6 4 5 DMA2 8 5 5 DMA1 7 LA2 6 MA0 7 8 23 — 7 8 RB1410 10 DMA0 MA(0-11) LA1 24 D IC1308 MBM29LV160BE90TN -E1-BA6L RB1414 DMA(0-11) 46 54 HM BOARD 2/4 MEMORY MANAGEMENT M — N 9-965-964-01<BA6L>HM-P2 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 67 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 HM BOARD SCHEMATIC DIAGRAM (3 OF 4) (KV-27FS320/32FS320/36FS320 ONLY) HM BOARD SCHEMATIC DIAGRAM (4 OF 4) (KV-27FS320/32FS320/36FS320 ONLY) Due to the complexity of this board, performing component level field repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Due to the complexity of this board, performing component level field repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. 9 | 10 | 11 | 12 | 13 | 14 | A 15 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 A — — VEE 5V 5V 3 GND C R1398 0 1/16:CHIP — GND 1 MS_BS 2 VCC 3 MS_SD10 NC E MS_INS R1399 0 1/16:CHIP NC 7 MS_SCLK 8 VCC 9 GND 10 L1304 AUX7 YDAC R1309 75 1/16W :CHIP C1309 100p CH:1608 C1303 100p CH:1608 FB1312 BK1608TS601 R1448 100k 1/16W :CHIP F R1449 470 1/16W :RN-CP FB1305 HM601 C1401 0.1 16V B:CHIP R1308 75 1/16W :CHIP C1308 100p CH:1608 9 C1302 100p CH:1608 FB1302 HM601 L1302 FB1303 10 HM601 11 12 :CHIP CDAC R1307 75 1/16W :CHIP C1307 100p CH:1608 R1411 33 1/16W :CHIP C1392 0.01 50V B:1608 C1398 10 16V :AL-CP G C1399 1500p 50V B:1608 R1438 10k 1/16W :CHIP Y-MS GND U-MS V-MS VEE E C1337 10 6.3V B:CHIP C1369 0.1 16V B:1608 C1356 0.1 16V B:1608 — 4 5 R1360 1k 1/16W :RN-CP C1366 0.1 16V B:1608 C1357 0.1 16V B:1608 C1368 10 16V C1341 0.1 16V B:1608 C1352 0.1 16V B:1608 CLK INT — C1371 0.1 16V B:1608 C1343 0.1 16V B:1608 C1376 0.1 16V B:1608 5V C1347 10 6.3V B:CHIP VEE C1335 0.1 16V B:1608 C1363 0.1 16V B:1608 C1358 0.1 16V B:1608 FL1306 EMI FILTER :CHIP 1 C1329 10 16V EMI C1349 0.1 16V B:1608 VA5 C1327 10 16V 2 3 C1386 0.1 16V B:1608 1 C1354 10 16V VEE C1325 0.1 16V B:1608 2 3 4 5 C1353 10 16V R1372 1.5k 1/16W :RN-CP 5V C1367 10 6.3V B:CHIP C1359 10 16V C1364 0.1 16V B:1608 C1344 0.1 16V B:1608 R1356 1k 1/16W :RN-CP R1358 0 1/16W :RN-CP C1315 0.1 16V B:1608 C1385 0.1 16V B:1608 R1367 560 1/10W :RN-CP R1310 43 1/10W :RN-CP FB1315 MPZ2012S101A VDD C1377 0.1 16V B:1608 C1365 10 16V IC1304 PQ07VZ012 VEE C1348 0.1 16V B:1608 C1342 0.1 16V B:1608 DAT H GND CLKDA MCLK 3 C1336 0.1 16V B:1608 VEE 1 2 R1359 150 1/10W :RN-CP C1355 0.1 16V B:1608 C1350 0.1 16V B:1608 C1360 10 16V — CN1301 TAB CONTACT R1374 33 1/16W :CHIP 1 R1366 0 1/16W :RN-CP GND G AUX0 H 5V C1394 1500p 50V B:1608 C1370 10 16V — — R1397 220 1/16W IC1303 PQ07VZ012 MS-R VEE R1415 220 1/16W :CHIP C1395 1500p 50V B:1608 D F FB1311 HM601 C1397 1500p 50V B:1608 R1437 10k 1/16W :CHIP R1435 560 1/16W :CHIP R1439 270k 1/16W :CHIP 100p CH:1608 AUX1 — GND RESET 8 FB1310 HM601 AUX4 C1402 22 6.3V AL-CP 33 1/16W :CHIP MS-R 4 6 R1386 220 1/16W D1310 UDZSTE-173.9B R1410 TBCK TWS MS-L R1440 270k 1/16W :CHIP C1393 1 16V B:2012 MS-L 3 5 FB1304 HM601 L1303 UDAC Q1303 2SB709A-QRS-TX FB1309 HM601 7 :CHIP D1308 MA153-TX 2 FB1307 HM601 RST :CHIP VEE R1443 22 1/16W :CHIP D1307 MA153-TX C1404 0.01 25V B:CHIP CN1302 12P S-MICRO 1 MS-R AUX2 MS_SCLK — — R1400 0 1/16:CHIP R1457 0 1/16W:CHIP D1311 MA153-TX 6 MS-L HD0 MS_DATA MS_INS 5 33 1/16W :CHIP M BOARD FB1308 HM601 4 33 1/16W :CHIP R1409 TO CN302 R1442 22 1/16W :CHIP R1444 1k 1/16W :CHIP R1408 — AUX3 MS_BUS D1306 MA153-TX TSD0 CLKDA — CN1304 10P MEMORY STICK IC1302 CS4335-KSZR — SET5V C1311 10 16V R1436 560 1/16W :CHIP VEE 2 VEE R1441 22 1/16W :CHIP D NC C1396 10 16V :AL-CP VDD 1 FB1313 BK1608HM601 8 FB1306 MPZ2012S101A C1400 0.1 16V B:CHIP R1451 47k 1/16W :CHIP C CN1303 3P :S-MICRO 7 R1447 10k 1/16W :CHIP SET5V 6 R1445 1k 1/16W :CHIP R1450 47k 1/16W :CHIP 5 — :CHIP 1 Q1301 2SB709A QRS-TX L1301 VA5 HN BOARD 2 Q1302 2SD601A B VEE TO CN1602 3 B D1309 L-1503CB/1ID 4 R1446 100 1/16W :CHIP — I C1482 0.1 16V B:1608 C1480 0.1 16V B:1608 C1483 0.1 16V B:1608 C1485 0.1 16V B:1608 C1481 0.1 16V B:1608 C1484 0.1 16V B:1608 HM BOARD 4/4 POWER SUPPLY I HM BOARD 3/4 — XOUT R1385 100k 1/16W :CHIP MEMORY STICK CONNECTOR — XIN 9-965-964-01<BA6L>HM-P4 X1301 27MHz J C1373 27p CH:1608 J C1378 27p CH:1608 — K 9-965-964-01<BA6L>HM-P3 — KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 68 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 1 R932 1.5k :CHIP A B C 4 5 6 7 8 9 Q807 D 9.5 G 6.3 S GND All voltages are in V. 11 | 4 5 9V 6 HP 7 VP 8 VM 9 R922 22 R933 0 R915 4.7k L901 R914 820 R912 150 R936 5.0MM C908 470 16V R931 2.2k R907 2.2 R909 100 L804 5.0mm Q901 2SC5511 VM DRIVER R905 2.2k D902 MTZJ-T-77-22 R938 0 R904 18k C906 0.001mF :PT R902 2.2 R930 0 C904 0.001mF :PT C862 10mF R820 * R821 * C903 470mF D901 MTZJ-T-77-22 R906 18k R908 560 R815 68 R827 4.7k :CHIP C902 0.01 R824 100k :CHIP 9V R870 2.2k :CHIP C813 R866 56k — R822 47k :CHIP C808 10000p R830 7.5MM R809 * Q812 2SA933AS-QRT HP R829 470k 1/10W :CHIP D808 1SS133T-77 R825 100k C826 100p :CHIP Q805 KTB764 QPVM OUT R840 2.2k :CHIP C804 0.22mF DQPVM DQPVMA DQPPOA VCC1 OP60 OP6M OP6P GND HPIN GND DFD C802 10mF R2808 10k 1/10W R2807 3.3k 1/10W — H — E 6 E 7 VM 8 VM CN902 8P DFPHA DQPPHA VCC2 9VD DQPD GND HSAWIN HSAW ISEL C821 10000p R855 10k :CHIP R841 * R856 3.9k :CHIP R833 * R837 * C812 10000p R834 * R890 * C824 47000p D813 1SS133T-77 R864 100 :CHIP C823 0.0027mF R893 33k CHIP Q2802 2SB709A-QR VP OUT R2803 22k 1/10W R2800 22k 1/10W R2801 47k 1/10W 5 Q2803 2SB709A-QR VP OUT D2801 MTZJ-T-775.6C C2801 1 100V DQPAA Q.P.Q.P.+ Q.P.+ R2805 4.7k 1/10W R2804 10k 1/10W Q2804 2SB709A-QR VP OUT N.C IC801 C5023C5184 CORRECTION G D2802 1SS133 R842 2.2k 1/16W :CHIP R857 * C803 0.22mF R817 * R828 33k :CHIP C809 0.33 10V B R903 560 C901 2.2 160V L803 R811 10 R901 100 C810 0.1mF F R814 * Q.P.- 4 R860 10k 1/16W :CHIP R910 470 C910 0.1mF :PT C909 0.1 C805 0.033 R819 47k JW910 5.0MM Q902 KTA1659A VM DRIVE 1 C907 33 160V S C911 100mF R911 220 R818 :CHIP D804 RGP10GPK23 Q905 2SB709A-QRS-TX VM OUT Q908 2SB709A Q903 2SD601A-QRS-TX AMP R913 56 100 11 E 9V Q807 IRF614 QP OUT C930 470 3 10 3 D903 1SS133T-77 R918 47 2 9 2 E 1 R826 2.2k R921 10k R919 47 D907 MA111-TX 8 1 NC TO NECK ASSY 7 +B L801 10mH 6 +B C811 0.082 400V Q906 2SC2412K-T-146 VM OUT D908 MA111-TX Q904 2SD601A-QRS-TX AMP 9V CN901 9P 4 5 C931 470 R917 4.7k V BOARD TRANSISTOR VOLTAGE LIST 3 | 3 D807 ERA82-004TP5 D906 MA111-TX C Q808 KTB764 QP OUT C912 100 D905 MA111-TX — 2 R876 1k :CHIP Q907 2CS2412K VM OUT C905 0.01 1 10 4 R935 100 C913 0.001mF — E Q805 Q808 Q812 Q901 Q902 Q903 Q904 Q905 Q906 Q907 Q908 Q1810 Q2801 Q2802 Q2803 Q2804 | D806 1SS133T-77 9V CN502 HM 9 3 B TO A BOARD E 4.2 9.0 2.0 0.8 133.4 1.8 1.8 6.7 7.1 8.1 6.2 GND GND 4.1 7.2 8.0 | L802 10mH — C 1.8 4.3 GND 67.0 67.0 6.2 8.8 0.0 9.0 9.0 0.0 59.7 3.1 GND 0 6.6 8 9V C914 0.047mF :PT R923 47 D B 3.5 8.6 1.3 1.4 132.9 1.2 1.2 7.1 7.4 7.4 6.9 0.0 0 0 6.6 7.4 | — — [MPEG DECODER, MEMORY MANAGEMENT, MEMORY STICK CONNECTOR, POWER SUPPLY ] (KV-27FS320/32FS320/36FS320 ONLY) Due to the complexity of this board, performing component level field repairs is not recommended. If service is required, CONDUCTOR SIDE complete board replacement is the preferred repair method. Data is provided for reference only. 7 A R916 5MM C | 2 All voltages are in V. 6 1 B N/C 3..5 3.8 4.5 9.0 4.6 4.6 4.5 N/C 4.8 GND 0.3 | 12 A 11 12 13 14 15 16 17 18 19 20 21 22 5 13 IC801 PIN VOLT 1 7.4 2 2.3 3 4.8 4 GND 5 6.3 6 4.5 7 9.0 8 5.8 9 4.6 10 4.8 9 | 14 8 4 15 7 | 16 6 3 17 5 | 18 4 2 19 3 | 20 2 1 21 1 V BOARD IC VOLTAGE LIST Due to the complexity of this board, performing component level field repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. 22 COMPONENT SIDE D805 1SS133T-77 HM V BOARD SCHEMATIC DIAGRAM [MPEG DECODER, MEMORY MANAGEMENT, MEMORY STICK CONNECTOR, POWER SUPPLY ] (KV-27FS320/32FS320/36FS320 ONLY) Q2801 2SD601A-QR VP OUT R2802 10k 1/10W I +B R1853 5.0MM — R1851 6.8k R1852 6.8k 4 C1820 0.47 160V 3 2 TO A BOARD J 6 1 C1818 * (FOR DF) C1819 * T504 DFT 1 — CN1802 0P R1849 * — L R1847 100k 1/4W R1846 100k 1/4W R1845 100k 1/4W C1815 0.022 630V C1816 220p 500V B L1805 10mH C1817 * K R1848 2.2k 2W R1850 * Q1810 2SC3840K DF-DRIVE D1812 1N4937/23 D1811 ERA38-06TP 1 D1810 ERA38-06TP 1 D1809 MTZJ-T-7715B R1844 5MM V BOARD VELOCITY MODULATION DEFLECTION — M KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 9-965-964-01<BA6L>V 69 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 M BOARD SCHEMATIC DIAGRAM 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 M BOARD WAVEFORMS 1 A 2 3 TO HM BOARD CN302 * B CN1302 11 GND I-AUDIO2 L I- AUDIO2 R CN1003 CN303 12P 3.2 Vp-p (H) 4 12 I-VIDEO 2 9 10 I-KEY GND I-MENU 6 7 8 I- SIRCS I-POWER 4 5 O-TIMER LED O-5V STBY O-MPWR LED 1 2 3 SCLK 11 BINT SDAT 9 10 GND BLUE RED 6 7 4 5 8 HOLD DOWN GND 2 1 TO HU BOARD CN002 * 3 INT 12 GND CLK 11 DAT V_MS 8 9 10 GND Y_MS U_MS 7 6 RESET 3 4 5 MS-R GND MS-L 1 2 4 B-DAT B-CLK TO JIG 3 GND B-INT 2 8 CN001 * 1 H-TRA N/S N/SMUTE 7 G GND B 4 5 6 3 1 IK CN301 9P 2 — R CN705 9 TO C BOARD HOLD DOWN TO JIG 1.2 Vp-p (H) 5 0.9 Vp-p (H) 6 R3395 0 1/16W :CHIP R332 0 — FB302 1UH R032 220 1.0 Vp-p (H) R331 0 R3396 0 1/16W :CHIP R211 * C 1.0 Vp-p (V) 4.7 Vp-p (H) +9V R329 * Q781 2SD601A-QR BUFFER IN4A IN1B IN2B IN4B R3334 * D3307 * R3335 C318 * * R311 220 1/10W D3308 * VREF OUTB NC IN3B 3 1N2B 14 4 GND2 VCC 13 5 OUT2 CTL2 OUT3 1N2A 11 CTL3 GND3 10 IN3A 1N3B 9 16 GND1 OUT1 R3905 * 12 15 1 2 CTL1 6 16 15 14 IN1A 7 R3998 * R3900 * C321 * C3990 * IN1B 8 IN3A R3999 * R339 * 13 VCC 12 CNT2 OUTA R3997 * R3904 * C3901 100 16V C3902 0.1 :CHIP R3907 * R338 * R515 100k :CHIP 3.3V Q515 2SD601A SW R336 * L612 R095 0 70 I-SIRCS 71 I-PWR O-AGCMUTE C005 0.0022 50V B R004 470 1/10W R115 470 1/10W R3115 0 R3550 470 1/10W AFC1 VCC-3.3V V-RAMPC VD-VRAMP VD+VRAMP EW-C 19 20 21 22 R322 0 R321 0 VZOUT(V) V-IN(U) U-IN(Y) 23 24 C019 0.1 16V :CHIP 36 35 34 C021 0.1 16V B R370 2.2k 1/10W R372 3.3k 1/10W R337 22 1/16W 0UH R326 33 32 31 R007 0UH 30 C094 0.01 25V B 28 27 26 C3307 0.1 16V 25 C097 47 25V C095 47 25V Q6000 2SD601A Z-DET R6002 10k :CHIP G B IIC_CLK L006 C305 0.1 16V R382 3.3M C015 0.1 16V B B Q519 2SD601A BUFFER Q860 2SD601A BUFFER R860 10k 1/10W :CHIP R320 2.2k 1/10W R318 2.2k 1/10W R3317 220 1/10W R L005 FILTER :CHIP Q303 2SB709A-QR BUFFER R319 220 1/10W Q3304 2SB709A-QR BUFFER B+ R3316 2.2k 1/10W Q305 2SB709A-QR BUFFER R309 10k 1/10W H.D R341 820 Q316 2SD601A-QRS-TX BUFF R342 1k R343 3.3k :CHIP R345 0 Q306 2SD601A SW R344 1k :CHIP Q307 2SB709A SW R3305 100 :CHIP C304 0.1 16V :CHIP R3559 22k 1/10W :CHIP R861 10k 1/10W :CHIP R3518 10k 1/10W :CHIP G C096 0.01 25V EMI R3580 22k 1/10W :CHIP R3315 220 1/10W VM R3990 100 :CHIP L3004 FILTER :CHIP C-IN Y-IN JR317 100 :CHIP L002 FILTER :CHIP TV-VID D050 D1NS4-TA2 C022 10 50V 4 I C023 470 16V C103 47 25V R3599 22k 1/10W :CHIP CH X301 R3308 C100 100 0.1 :CHIP 16V :CHIP C306 0.1 16V 3.3V 9V R3303 3.3M +9V R3519 10k 1/10W :CHIP L011 FILTER :CHIP EMI 29 Y-IN(VRB) 18 R015 10k 1/10W O C3560 10K R3528 10k 1-16W :CHIP L007 IC004 BAO5FP-E2 5V REG I C6003 1 16V B:CHIP 17 :CHIP R116 470k 1/10W 5 R6004 1k :CHIP EW-OUT H-OUT L3003 FILTER :CHIP D110 MA111-TX — 16 R325 0 16V EMI 15 C116 0.1 C115 560p 50V CH C008 0.1 16V :CHIP 14 C091 47 25V C090 0.01 25V B R003 1k 1/10W K — C012 0.0047 50V B R006 4.7k 1/10W R009 0 1/16W 1608 C007 470p 50V CH 13 R005 0UH C011 0.001 50V B C009 220p C010 1 50V 16V CH :CHIP 12 0.1 — 11 C313 16V :CHIP 10 25V C006 R002 0 9 47 C004 47p 50V CH 8 C092 C003 22p 50V CH 7 C326 R100 220k R9001/16W 330k C337 1/16W :CHIP 22p 50V 37 YUV X001 R008 0 1/16W 1608 R101 4.7k VIDEO2-IN(Y2 Y2/C2 IN) 6 VRT 5 J R6003 10k 1/10W R-OUT C2(Y2/C2 IN) 4 VIDEO1-IN 3 GND-YC 2 5 C-IN 1 C064 0.047 16V B R010 * R6001 10k 1/10W FBP-IN IK-AKBIN ABL-ACLIN IO-BDAT IO-SDAT O-BCLK O-LED D006 UDZSTE-175.6B :CHIP L G-OUT VM-OUT(VZ OUT) ZCROSS C559 0 R3551 4.7k D513 MA111-TX R310 1k 1/10W R371 220k :CHIP C330 0.1 25V 38 VCC-3.3V 6 40 39 GND-OUT O-MONO R061 10k ;CHIP D004 UDZSTE-1710B :CHIP C322 0.1 16V B-OUT 2 I-KEY I-HSYNC D512 MA111-TX C3995 22 16V Q3300 2SD601A VM OUT :CHIP B APC 3 I-MENU I-PROT R526 22k 1/16W :CHIP JR318 0 :CHIP R324 1k 41 VCC-3.3V Y-IN(CSYNC IN) R131 220 :CHIP 42 4 I-HLDWN 16V C511 EMI 80 43 IC001 M65585MF-103FP MICRO/Y-C-J/COMB MAIN-TV-IN R062 470 :CHIP I 44 GND-DEF VCC-3.3V 78 45 XTAL-NTSC B:CHIP 77 46 XTAL-PAL-N(VM) 1 16V D005 UDZSTE-1710B :CHIP 79 — +9V R3517 27k :CHIP 50V C014 :CHIP 47 1 :CHIP 220 48 D304 R060 76 49 MONITOR-VIDEO-OUT — 75 50 3.3V I-AFT 74 :CHIP 51 XTAL-PAL-M(EHT) O-SEL0 69 73 1k R059 52 O-SEL1 68 72 :CHIP 53 VCC-3.3V 10k 54 Q3502 2SD601A I-HP C3519 * IIC_DATA C325 0.0033 50V B SET_5V 55 DCT_FILTER :CHIP C3057 0.1 16V B 220 R028 R110 220 :CHIP H R3058 O-RELAY 56 EMI 22k R053 66 67 R203 220 :CHIP :CHIP MS-INT 57 VSS-DIG 1k 65 58 RESET R3057 R047 220 :CHIP 59 Q503 2SD601A H-OUT C099 47 25V C551 1 16V :CHIP R3525 1k 1/16W :CHIP Q504 2SD601A H-OUT C3612 R513 100k :CHIP C370 10000p :CHIP R3553 220 1/10W :CHIP R070 220 :CHIP CV-IN R048 4.7k 1/10W R201 220 :CHIP 60 O-SCLK R049 4.7k 1/10W 61 VHOLD R050 4.7k :CHIP R063 4.7k 1/10W 62 I-SAP C3054 1 16V :CHIP 63 D002 UDZSTE-175.6B :CHIP R080 10k 1/10W 64 R071 * :1608 ABL-PRT R054 22k :CHIP R112 4.7k :CHIP Q762 2SD601A-QR BUFFER R3543 330 :CHIP FILT Q763 2SD601A-QR BUFFER C3049 1 16V :CHIP R037 10k 1/10W HLF R R034 0 :CHIP R3529 10k 1/16W :CHIP R3524 6.8k 1/10W C033 0.01 25V B R3328 0 1/16W :CHIP B C3553 0.1 16V R556 2.2k :CHIP R096 220 :CHIP R031 220 1/10W :CHIP R3542 10k 1/16W :CHIP O-MUTE Q505 2SD601A R097 220 :CHIP C3554 0.01 25V B R3554 3.3k HVCO R035 100 1/10W VCC-5V C3052 220p 50V CH R3910 1.2k :CHIP R081 47k 1/10W R3527 2.2k 1/10W Q533 2SB709A ABL VSS-MCU R355 0 1/16W :CHIP D762 MA111-TX C3053 0.047 16V B R082 1M 1/10W R768 1k 1/10W R094 0 :CHIP O-SAP R794 0 1/16W :CHIP Q3005 2SB709A-QR SYNC-SEP R3541 5.6k :CHIP R540 10k 1/16W :CHIP 50V R763 15k 1/10W Y1 R084 680 1/10W R083 150k 1/10W R767 5.6k 1/10W R862 220 1/16W :CHIP O-DGC R766 3.3k 1/10W R765 2.2k 1/10W :CHIP Q773 2SD601A-QR BUFFER X-OUT R354 0 1/16W :CHIP G Q772 2SD601A-QR BUFFER L710 R769 1k :CHIP D772 MA111-TX R3908 * C3984 * :CHIP O-NS R773 15k 1/10W R777 5.6k 1/10W R778 1k 1/10W R3906 * C3988 * C3991 * C319 * C3989 * 11 3 IN2A C320 * 10 2 CNT1 C3994 * R3903 * L301 * GND IC3001 * YUV SW R3902 * 9 4 IN1A 4 1 R312 6.8k 1/10W JR44 0 R762 1k 1/10W :CHIP 3 R333 * C317 * D3306 * C098 0.01 25V B 10 Q761 2SD601A-QR BUFFER 2 D3305 * Q301 2SB709A-QR IK-BUFF C552 D763 MA111-TX 1 D351 UDZSTE-173.3B :CHIP C351 470p 50V CH 5 R352 470k 1/10W R351 4.7k STBY_5V R789 0 1/16W :CHIP R775 2.2k 1/10W :CHIP C782 82p :CHIP R764 270 1/10W :CHIP R776 3.3k 1/10W C781 82p :CHIP R772 1k 1/10W :CHIP R760 4.7k 1/10W — R771 1k :CHIP Q771 2SD601A-QR BUFFER — Q391 2SD601A-QR S-TX C3509 10 D3509 :CHIP D045 UDZSTE-1710B :CHIP STBY_5V O-VOL F R093 47k 1/10W 6 R313 0 IC002 M24C16-WMN6T MEMORY R3394 10k 1/10W R3393 2.2k 1/10W D044 UDZSTE-1710B :CHIP R040 4.7k 1/10W R3086 1k 1/10W R3085 0 L711 R770 D7734.7k 1/10W MA111-TX Q002 2SD601A-QR CONVERGENCE 7 R347 * R042 220 1/10W R3901 * C3315 * +5V 16V R774 270 1/10W :CHIP CH R3555 10k 1/10W R353 0 1/16W :CHIP R783 15k 1/10W R782 1k 1/10W :CHIP C047 50V VSS D783 MA111-TX C3611 G C3051 10 50V Q782 2SD601A-QR BUFFER E — 470p R759 0 1/16W :CHIP :CHIP STBY-7.5V Q783 2SD601A-QR BUFFER 8 R3391 4.7k 1/10W R3392 560 1/10W D390 MA111-TX X-IN R780 4.7k 1/10W L611 R785 2.2k 1/10W :CHIP Q004 2SD601A-QR BUFFER B 16V 3D_RST — R784 270 1/10W :CHIP R779 1k :CHIP R787 5.6k D782 1/10W MA111-TX R786 3.3k 1/10W R076 100 :CHIP R3087 100 :CHIP R043 220 1/10W C041 10 50V Q390 2SD601A-QR S-TX C390 0.01 25V B 5 C780 82p :CHIP R788 1k 1/10W D558 MA111-TX R041 D5594.7k 1/10W MA111-TX R039 220 1/10W 5V L712 C3613 I-BINT D Q008 2SD601A-QR BUFFER 6 :CHIP R030 220 :CHIP R3390 0 :CHIP C316 * IC301 * AUDIO PROCESSOR 7 R038 220 1/10W R346 * R314 10k 1/10W 8 L613 C3314 * R044 4.7k 1/10W DAT R090 22k 1/10W R045 4.7k 1/10W R027 47k 1/10W CLK — C048 100 25V R092 2.2k 1/10W R091 47k 1/10W 1 D052 UDZSTE-175.6B :CHIP 2 3 O IC633 NJM2391DL1-33 3.3V REG EMI FL001 FILTER :CHIP D250 :CHIP R3532 0 :CHIP C3534 0.0022 50V B R3536 8.2k :CHIP C665 100 25V TP604 R511 0 :CHIP 3.3V 10ERB20-TB5 IC003 PST9143NL STBY 5V RESET M G R3537 680k :CHIP C3542 * C3536 * R634 10 +9V C101 330 25V KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 14 13 12 2 4 9 8 5 6 C3539 0.01 25V B Y/C/J 50 48 49 45 47 46 43 44 42 40 41 39 37 38 35 36 34 32 33 31 28 29 30 27 24 26 25 22 23 19 21 20 18 17 16 14 15 13 12 11 9 8 10 6 7 3 5 4 1 GND GND C_YC Y_YC GND O-SEL0 GND VIDEO GND Y_YUV GND U-YUV V-YUV GND O-SEL1 GND IO-SDAT I-ABL-ACL IO-SCLK O-AGC MUTE 9V 9V I-AFT GND GND I-HSYNC 5V SET O-SAP I-SAP GND O-MONO GND O-TMUTE O-RELAY O-DGC STBY 7.5 Z-DET VM EW-OUT V+RAMP V-RAMP I-PROT I-HOLDOWN HOUT O-MUTE I-HP O-RIGHT 2 GND GND TO A BOARD 16V MICRO TUNING CONTROL 9-965-964-01<BA6L>M CN3000 5OP :B TO B O-LEFT 2 — 2 O C3520 R3530 5.6k 7 R852 47k :CHIP 5V 5V P R3534 15k 3 — M BOARD R3535 5.6k 11 L3609 C3638 100 25V C666 100 25V R3539 0 R547 68k :CHIP R3533 8.2k :CHIP 10 R213 4.7k :CHIP R212 0 R557 2.2k 1/10W C542 0.0022 50V B 1 N JR546 0 :CHIP R851 1k 1/10W C102 1000p :CHIP IC565 NJM2902M-T VERT DRIVE BUFF — CN100 70 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 M [MICRO TUNING CONTROL, Y/C/J] CONDUCTOR SIDE COMPONENT SIDE 2 3 4 1 X001 C3054 C3051 1 A- 1415- 722- A C319 I C004 C3049 CN303 R112 R050 R338 R6003 R6001 Q6000 R3058 C316 C066 C048 R041 12 R634 R040 R042 R096 R097 R094 R339 R048 R038 R070 C557 Q533 Q302 R3550 R131 R337 R342 C3520 R080 C6003 C116 R005 C021 C092 L002 R015 R778 C3611 R322 R382 C091 C041 R039 R861 R3519 R3559 R006 R331 R780 D763 L3004 R3531 C3534 R3301 C3988 R369 R860 Q306 R341 J R318 J R545 J R546 Q3300 R310 C542 R3536 R768 Q763 Q762 R3999 R3902 C3901 R3997 R3901 R760 R766 C3984 C3989 C3990 R326 L005 R852 R3530 R311 R3394 FL001 D050 C666 D051 C3560 R3516 C500 R314 R3391 R313 R556 D513 D512 R851 C666 R3903 R3500 R027 1- 862- 320- 11 C564 R3390 ( 1- 724- 259- 11) C099 J R3501 C3519 R3517 R3576 C559 R3523 R3393 CN3000 J R3502 R3551 Q390 D236 R363 C3994 R372 C325 D3503 R514 C322 R3328 R899 R3524 R515 R3554 C3520 R3518 C330 C538 R862 R900 R371 L612 D234 R364 C3989 R305 R319 D502 D304 R324 C326 C096 R3525 C3612 C3990 D3902 C3902 C3988 C3518 R577 R3558 C3901 D3903 R116 C115 C010 C011 C009 R003 C008 R320 R3599 R3528 I C565 C511 I C3001 D3901 C015 R304 C019 D230 C095 C551 14 8 C001 R3904 L712 R774 Q771 L711 C092 C3307 C033 R3533 Q515 R540 R3906 R3905 R3907 R3900 Q781 R771 R775 Q303 1- 862- 320- 11 C782 L710 R769 R765 R783 R3910 R785 C091 C623 1 Q3502 R3541 C-3 C-2 C-2 C-2 B-3 D-4 D-4 A-2 A-3 B-3 B-3 B-3 B-3 C-3 B-5 C-2 C-3 C-5 R547 R557 7 A( 1/ 2) D3509 Q301 Q305 Q306 Q307 Q316 Q391 Q504 Q762 Q763 Q772 Q773 Q782 Q783 Q860 Q3005 Q3300 Q3304 Q6000 C097 R309 R030 D-5 B-4 D-6 C-6 D-6 R3553 IC001 IC003 IC004 IC301 IC633 X301 C100 D538 50 1 49 C3638 C-5 D-6 D-3 C-5 C-5 A-3 B-3 B-3 B-3 A-2 B-3 D-5 TRANSISTOR D051 D004 D110 D390 D558 D559 D762 D763 D772 D773 D782 D783 D3402 IC R381 1 CN001 D250 D050 DIODE R352 R004 Q519 CN002 16 2 R634 A( 2/ 2) IC002 R213 C098 9 R325 C665 A( 2/ 2) M BOARD LOCATOR LIST (COMPONENT SIDE) C012 C102 C3638 4 1 1 8 C3531 R526 Q503 C101 IC633 C665 C007 D D110 1 D006 2 R351 C351 C3991 C305 R367 R3580 4 C3984 R3998 R3535 C3532 R3529 5 8 C041 R037 D3402 R036 C321 C320 C3554 R3908 C306 R138 L3609 R3555 49 R3305 R031 C048 C101 C043 C044 C046 R043 CN3000 50 C3315 D045 D044 R028 C321 R035 D351 C3612 R212 R034 C499 R3509 Q002 C556 IC001 R095 C3308 C067 C047 C3537 C511 R327 R346 C3315 R312 R3392 D390 C390 R090 C3613 C3509 R3396 L370 C3535 C3541 R3532 C3058 C3060 C3057 C066 C3540 R053 R054 R092 R093 R336 C3530 L613 C3613 R045 Q391 C372 L371 R3539 Q504 C R3334 C3536 D559 R044 C552 R203 D558 R091 C3553 R3057 R071 D3306 D3308 D3307 D3305 C781 R3302 C014 Q761 C780 C3611 L611 R762 R784 C094 Q008 R513 C3995 R3527 R049 C045 EY3501 IC301 R3087 J R44 R032 R063 C065 C064 C062 C061 R081 D004 R763 R764 R779 C304 L301 C318 C317 Q301 R062 R009 R3115 R115 C103 FB302 R3335 J R3503 R100 C370 R3308 C3371 R060 R059 R110 R047 R076 A( 1/ 2) X301 R511 C099 Q3005 C3059 R201 C095 C3053 C003 C023 C022 C005 R008 R010 C270 R061 C103 R3086 X001 R368 Q3304 R083 B R6004 J R317 C097 C3542 R3552 C004 R082 R3990 Q860 C006 C006 D005 R318 C022 IC003 C3051 R101 R3316 Q305 Q316 Q773 01 N3 C C3052 C3596 R3303 R354 R321 Q505 R3542 R3543 9 R782 C090 D052 L3003 D002 C3597 R344 R3537 L007 R3538 9 R211 R333 R3534 C3539 C023 R002 R6002 C313 Q772 7 1 CN302 R332 D3645 D773 R370 CN 30 1 R776 R343 R345 C337 D772 R789 R770 6 12 R329 R007 R3317 R3315 Q783 5 1 R084 Q307 Q782 R353 4 A R787 R788 R797 R777 D783 3 Q004 L006 L011 D D762 R767 2 R3085 B IC634 R759 1 D782 R794 C3991 C R795 6 R773 R772 CN001 C3994 R355 CN002 5 1 R3395 CN302 1 R786 4 12 R796 1 A [MICRO TUNING CONTROL, Y/C/J] R347 All voltages are in V. M C3314 IC633 PIN VOLT I 9.0 G GND O 3.3 IC3001 PIN VOLT 1 4.5 2 4.0 3 3.0 4 GND 5 4.0 6 4.0 7 0.0 8 4.5 9 4.5 10 GND 11 4.5 12 0.0 13 9V 14 4.5 15 GND 16 4.5 R330 IC003 PIN VOLT 1 N/C 2 GND 3 GND 4 5.0 5 5.0 IC004 PIN VOLT I 7.5 O 5.0 G GND IC301 PIN VOLT 1 4.5 2 0.0 3 4.5 4 GND 5 N/C 6 4.5 7 4.5 8 N/C 9 N/C 10 N/C 11 4.5 12 4.5 13 N/C 14 9.0 15 4.5 16 GND IC565 PIN VOLT 1 3.4 2 3.4 3 2.1 4 9.0 5 1.0 6 1.0 7 1.0 8 1.6 9 1.6 10 1.6 11 GND 12 1.6 13 1.6 14 1.6 CN303 1.6 2.3 1.0 1.5 0.5 1.2 2.0 1.5 4.8 4.8 4.8 4.8 0.0 5.2 0.0 0.0 0.0 0.0 1.4 4.9 4.9 0.0 0.1 0.1 2.4 5.0 5.0 0.1 0.0 5.0 5.0 5.0 0.1 0.0 4.9 4.9 IC002 PIN VOLT 1 GND 2 GND 3 GND 4 GND 5 4.8 6 4.8 7 GND 8 5.0 12 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 1 IC001 PIN VOLT 1 5.0 2 GND 3 2.2 4 2.2 5 GND 6 5.0 7 0.0 8 2.0 9 0.3 10 2.1 11 5.0 12 GND 13 3.3 14 3.1 15 1.0 16 1.5 17 3.3 18 0.5 19 1.1 20 GND 21 0.5 22 1.7 23 0.5 24 0.5 25 0.5 26 0.0 27 0.0 28 2.1 29 2.7 30 3.3 31 2.9 32 GND 33 2.8 34 3.3 35 2.9 36 GND 37 1.8 38 0.0 39 0.1 40 2.0 41 1.6 42 3.3 43 0.5 44 1.6 ( 1- 724- 259- 11) M BOARD IC VOLTAGE LIST M BOARD LOCATOR LIST (CONDUCTOR SIDE) DIODE D002 D005 D006 D044 D045 D050 D051 D052 D250 D304 D351 D512 D513 D3305 D3306 D3307 D3308 D3509 IC B-3 C-3 C-3 C-3 C-3 E-2 E-2 B-4 E-1 C-5 D-3 D-5 D-5 C-2 C-2 C-2 C-2 D-4 IC002 IC565 TRANSISTOR D-3 D-5 Q002 Q004 Q008 Q303 Q390 Q503 Q505 Q515 Q519 Q533 Q761 Q771 Q781 Q3502 C-3 B-2 C-3 C-4 D-6 D-4 B-4 D-6 C-5 D-6 A-5 B-5 A-5 D-4 M BOARD TRANSISTOR VOLTAGE LIST Q002 Q004 Q008 Q301 Q303 Q305 Q306 Q307 Q316 Q390 Q391 Q503 Q504 Q505 Q515 Q519 B 0.0 3.8 0.0 3.6 3.6 3.6 4.8 0.0 0.0 0.8 0.6 0.0 0.0 1.1 0.0 0.0 C 2.0 9.0 2.6 2.1 GND GND 5.3 GND 3.3 1.5 3.3 0.4 2.4 8.8 0.0 3.8 E GND 4.4 GND 3.6 2.8 3.0 4.2 0.0 0.0 1.9 1.5 GND GND 1.7 GND GND Q533 Q761 Q762 Q763 Q771 Q772 Q773 Q781 Q782 Q783 Q860 Q3005 Q3300 Q3304 Q3502 Q6000 B 1.5 2.2 3.1 2.0 2.2 3.2 2.0 2.2 3.3 2.1 3.9 5.1 1.8 3.6 0.6 0.6 C GND 3.8 9.0 9.0 3.8 9.0 9.0 3.9 9.0 9.0 5.7 0.8 9.0 GND 0 1.2 E 1.5 2.9 3.8 2.6 2.9 3.8 2.6 2.9 3.9 2.7 3.3 5.0 2.4 2.9 GND GND All voltages are in V. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 71 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 C BOARD SCHEMATIC DIAGRAM 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 C BOARD WAVEFORMS 1 A R717 * (1P) KG KB G2 0P CN704 H C716 4700p 4 5 3.50V p-p (H) 6 G2 3 5 7 RV701 110M — 12 1 G1-2 10 11 G1 G4 HV CRT EARTH H2 9 KR KR H1 8 13 G1-3 CV G1-1 6 1 E 164.1V p-p (H) 145.3 V p-p (H) 134.4V p-p (H) CN702 0P KB KG 1 R715 560k 1/2W E CN703 0P D704 PG104R C IC702 TDA6108JF/N1B CRT DRIVE G OUT 6 R OUT 5 B OUT 4 IK 3 C711 0.001 50V B 5 6 VDD B IN R IN 2 GND G IN 1 7 8 9 TO CN301 C705 10 250V L701 CN705 * — IK 1 GND 2 R 3 B 4 G 5 N/S R712 1k 1/2W R710 100 1/4W M BOARD 6 N/S MUTE 7 H-TRAP 8 D705 1 3 C706 0.1 250V R708 100 1/4W 100 1/4W R723 100 1/4W R724 100 1/4W D703 1SS83TD D702 1SS83TD 2 R700 22k 1/4W R713 1k 1/2W IC701 PIN VOLT 1 0.3 2 0.3 3 -13.0 4 0.5 5 12.0 IC702 PIN VOLT 1 2.2 2 2.2 3 2.2 4 GND 5 5.0 6 200.0 7 139.7 8 142.0 9 138.6 R711 1k 1/2W R709 100 1/4W RD9.1EW-T1 R731 0 :CHIP R722 C BOARD IC VOLTAGE LIST R714 100 1/2W 4 — D701 1SS83TD C709 10 50V C710 10 50V TO A BOARD CN503 CN706 7P 200V — N.C. GND 7 C704 10 250V 6 5 HEATER 4 -15V 3 +12V 2 HOLD-DOWN 1 Q701 2SD601A N/S MUTE — COIL- N/S N.C. N/S COIL+ CN701 3P C708 R703 100 1/10W Q700 2SD601A N/S MUTE R721 2.2k 1/10W TO N/S COIL IC703 NJM78M09FA 9V REG R734 100 :CHIP R720 2.2k 1/10W G 3.50V p-p (H) J701 G4 CV F 4.10 p-p (H) CRT 1 B E G2 R716 100 1/2W R718 2.2 C715 4700p D 3 TO A BOARD (T503) — 2 I R701 10k 1/10W R702 150 -15V 1 2 3 4 3 R719 220 2W O C713 10 50V R732 10k :CHIP R727 2.2k 1/10W Q703 2SD601A H-TRAP R725 2.2k 1/10W C714 47 25V R705 10k 1/4W RV702 47k R726 4.7k 1/10W C BOARD TRANSISTOR VOLTAGE LIST C702 0.1 50V — R707 1.5 1/4W CRT DRIVE RGB DRIVE H All voltages are in V. C703 47 25V R704 1.5k R706 1 1/4W R733 10k :CHIP 5 1 2 C719 IC701 BD7941AT-V5 N/S AMP G IC703 PIN VOLT I 12.0 0 9.0 G GND C701 47 25V Q700 Q701 Q703 B 0.3 0.3 6.0 C 0.8 0.3 6.5 E GND GND 5.5 All voltages are in V. — KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 9-965-964-01<BA6L>C 72 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 HN BOARD SCHEMATIC DIAGRAM (KV-27FS320/32FS320/36FS320 ONLY) 1 | 2 | 3 | 4 | 5 | HS BOARD SCHEMATIC DIAGRAM (KV-32FS120/34FS120/36FS120/38FS120 ONLY) 6 A A TO CN1303 TO CN201 C1601 R1600 2.2 10W 16V CN1601 3P C1602 1 GND 2 GND 3 C1603 50V CN1602 3P 50V I 14V B PS1600 IC,LINK HM BOARD IC1600 BA05T 5V REG A BOARD — 1 G O 1 5V 3 GND — 5V REG | 3 | B D1233 RD9.1EW-T1 2 GND 3 AUDIO L2 GND01 L 4 AUDIO R2 5 MENU 6 KEY 7 TO A BOARD — LED-TMR MPWR-LED D 2 | 3 | 4 | 5 5V-STBY 4 SIRCS 5 GND S1008 TOP R1202 2.2k 6 7 R1008 6.8k R1010 820 R1009 2.2k S1001 S1002 CH + R1011 680 S1003 CH- S1005 S1004 VOL- VOL + TV-V R1007 100 IC1001 SBX3081-71 SIRCS S1006 VCC GND D1001 MTZJ-T-77 PROTECT GND VCC OUT D R1203 6.8k R1201 1.5k D1003 MTZJ-T-77-91B — BOTTOM B IN D3002 LNJ801LPDJA TIMER LED CN3001 6P L TYPE :S-MICRO BEZNET C3001 100 CN002 1 TIMER LED 2 MPWR LED 3 D3004 PDZ5.6B-115 5.6V :CHIP F — D1002 LNK0120022G 9-965-964-01<BA6L>HS GND 4 STBY 5V 5 SIRCS 6 C1001 100mF 25V R1004 1k TO A BOARD R3001 1k — — U S1007 2 3 ON R1238 100k 1/4W OUT IC3001 SBX3071-71 DETECTOR C S E A — | — M 1 GND POWER R1237 220 1/4W C1235 1 50V TOP CN002 R1236 100k 1/4W R D1005 MTZJ-T-77-91B CN1004 7P R1235 220 1/4W C1234 1 50V D1235 RD9.1EW-T1 D1004 MTZJ-T-77-91B C | | V 1 GND D1236 RD9.1EW-T1 1 5 J1231 3P R1234 75 C1238 5mm 9-965-964-01<BA6L>HN HR BOARD SCHEMATIC DIAGRAM (KV-27FS320/32FS320/36FS320 ONLY) | FRONT VIDEO2 CN1005 7P — C 4 TO A BOARD VIDEO 2 HN BOARD — 2 CN004 NC 2 | G POWER ON R3014 100 S3006 D — E KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 9-965-964-01<BA6L>HR 73 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 4 5 H R704 8 A- 1054 - 787- A 172426012 CN1001 R707 7 R1007 D1001 O VCC R1001 NC GND C1235 KEY R1238 L GND VI DEO2 D1235 >PF- LP< R1234 1005 JW A- 1415- 870- A 1006 JW D1233 J 1231 C1003 S1007 AUDI O R2 R3014 S3006 J 701 GAP CN703 BA6L04 CN702 E GROUND SPARK 172426012 C1238 AUDI O L2 12 1- 862- 322- 12 V GND BA6L04 RV701 M ENU/ SEL C3002 S1008 13 R1235 C1234 R1236 G1 CN1004 ENU M UP/ DOW N C3001 D3002 D3001 R712 R3001 C715 D3003 SI RCS ER ON POW R1237 1201 JW 5V STBY 12 1007 JW 1008 JW R R PW R LED PW M CN3001 KR D GND LED TMR G CN704 11 R710 R709 R708 D1236 4 R711 6 O 1 KG 1 STBYV 5 10 R713 D702 C1601 I C3001 A- 1415- ROUT KB D701 CN1601 SI RCS R716 G2 D703 C1600 R TM 9 8 2 1 BOUT TP001 TP002 P RGB AM C 6 9 3 R PW M G1 HS702 1 R3002 7 G1 I C702 C1002 R718 H1 718- A COMPONENT SIDE 8 CN1602 R750 C716 H2 C1001 +5V PS1600 C707 JW 708 JW 707 R715 +14V R714 R722 R723 C706 GND 9 R724 D704 R1004 3 C1603 GND 1 [VELOCITY MODULATION, DEFLECTION] C1604 1 R717 C705 I C1600 R1600 702 JW 705 JW D705 R728 D1002 O I >PF- LP< 701 JW B HS1600 JW 600 CN706 C711 750 JW C1602 C713 1 C718 C704 L701 D730 703 JW CN705 1 C714 RV702 C717 IK R GND 706 JW 2 C701 C710 R705 R706 C719 B G NSM N/ S N HDOW HTRAP [SIRC, LEDS, MAIN POWER BUTTON] (KV-27FS320/32FS320/36FS320 ONLY) C703 C708 R700 CN701 D1003 BA6L04 C709 [IR DETECTOR, FRONT VIDEO2] (KV-32FS120/34FS120/36FS120/38FS120 ONLY) 7 I C1001 A NC GND - 15 1 [5V REG] (KV-27FS320/32FS320/36FS320 ONLY) 6 1- 862- 749- 12 C702 C700 HD +12 N/ S- N/ C I C703 4 I N/ S+ I C701 R719 3 5 ER POW 3 S1006 2 200V 1 [CRT DRIVE, RGB DRIVE] O C HN HR HS V D1005 1- 863- 225- 12 172426012 1002 JW 1010 JW R1201 R1203 R936 C1818 C1820 Q901 R1851 R902 1004 JW CH+ VOLTV- V S1005 R1852 D1812 1801 JW C903 C1815 R1846 CN1802 C901 R1853 R1845 C1830 R1847 C1817 Q1810 R901 D807 D806 D805 D1809 VOL+ R1010 E D901 L804 R1008 R905 C1819 S1004 A- 1415- R931 B E R1843 R1011 723- A B L901 D1810 R1844 CH- B E 901 JW R909 C906 R1849 D1811 T504 C904 C811 E R1850 R1848 R826 D813 R892 L801 D804 1- 862- 323- 12 172426012 D902 R904 L1805 Q808 L802 S1003 I C801 C813 C805 R908 BA6L04 11 R906 B+ C907 C930 C912 C908 NC R935 Q812 R917 E E C909 C1816 I R1009 R922 C902 C932 R921 R916 C913 9V E 1 S1002 911 JW C931 9V 1 B 803 JW C803 JW 912 R903 R907 R920 HP 12 JW 806 VM CN901 C862 22 S1001 Q902 C905 905 JW VD+ L803 C810 Q805 R915 R866 910 JW D903 R918 902 JW JW 903 D808 A- 1415- R924 R911 D2802 R811 H R912 R913 C911 R914 R919 9 R923 D2801 B C804 C914 C2801 G C802 906 JW S D803 E D1004 C823 Q807 R910 R815 R814 718- A G C910 8 1 CN902 802 JW 1009 JW R830 >PF- LP< 1003 JW R1202 F 1- 862- 324- 12 B 172426012 BAR CODE BA6L04 J KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 74 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 1 2 3 4 5 6 7 8 I C701 C700 CN704 D3001 1- 863- 225- 12 GND 172426012 D1233 TOP C709 R700 HDOW N NTRAP D730 NSM N/ S G B R E R724 R723 R722 R708 R709 R711 KR D702 12 R712 13 G1 1 S3006 R3014 AUDI O R2 J 701 R1234 12 GAP GROUND C715 R3001 C3001 VI DEO 2 AUDI O L2 J 1231 R705 CN705 R731 D701 11 KG " RGB & TI LT AMP. " CN1004 R1236 L V C3002 KB 4 D3003 GND R713 5 MENU KEY I C702 D703 10 G1 G2 D3002 CN3001 SI RCS H2 SPARK R1238 5V- STBY R1235 S1007 IK C705 R714 H1 G2 ER ON POW HS702 9 G1 R- LED MPW C1235 8 R716 R3002 G I C3001 D3004 O TMR MPW R GND STBYV PW R SI RCS R1237 GND GND 3 1 LED- TMR 7 6 G2 6 1 C716 1 D1236 C1238 C730 R730 R718 +14V I C1001 172426012 CN1601 D1235 C706 R715 C1600 1- 862- 749- 12 R R717 R710 PS1600 D704 C707 NC +5V GND R1001 R728 R750 O 3 VCC C1603 C1601 C1234 9 1 L701 C704 CN1602 C R706 R734 C717 R726 R733 1 R720 RV702 C714 D705 C1002 1- 862- 322- 12 172426012 RV701 GROUND E CN702 C1003 GROUND D 2 C713 R1600 1 [VELOCITY MODULATION, DEFLECTION] Q700 R721 R1004 C1001 Q701 Q703 O CN706 C1604 R703 C718 O I B CONDUCTOR SIDE 4 R701 5 1 J R750 J R751 C711 7 [IR DETECTOR, FRONT VIDEO2] (KV-32FS120/34FS120/36FS120/38FS120 ONLY) 1 C719 C708 C1602 I C1600 3 R704 C703 D1002 R719 C710 C701 D1001 D1003 [SIRC, LEDS, MAIN POWER BUTTON] (KV-27FS320/32FS320/36FS320 ONLY) CN701 C702 R707 C712 POW ER HS1600 R1007 A S1006 [5V REG] (KV-27FS320/32FS320/36FS320 ONLY) 200V NC E H - 15 +12 HD I C703 CN1001 R727 R702 R725 R732 [CRT DRIVE, RGB DRIVE] I C HN HR HS V CN703 D1005 R1201 R1203 R1202 R830 QP- C823 R2805 G R815 C806 S D803 C808 D808 R809 R829 J R803 C810 R818 L803 Q812 1- 862- 324- 12 172426012 R1846 R893 C824 R864 L801 C1815 L802 R1844 Q1810 R1847 R1843 D805 D1812 C1830 C903 D804 D1809 R1852 C1817 Q901 D806 D807 D1810 S1005 D813 R876 E C811 B R892 R826 C821 R856 R834 D1811 L1805 C813 R837 R842 R840 R841 C812 R833 R855 R860 R1848 R1850 R1849 Q808 C1818 R901 C809 R821 R825 R828 R870 R820 C862 R2807 R2804 R2801 R822 R857 R817 R819 R824 1 R890 Q907 R932 Q906 L901 C1820 L804 C904 T504 C804 C803 C1816 172426012 R814 Q2804 R2808 Q2802 R2800 R2803 Q2801 R2802 C920 9 R866 R915 R917 C913 B+ R1853 TV- V Q805 I C801 R1851 I J R802 R827 C914 R916 R935 R934 D906 D905 C930 Q908 Q905 E E NC E B R811 C908 R909 R905 D901 D2802 Q2803 C1819 S1004 R902 C912 VM VD+ HP 9V 9V 1- 862- 323- 12 C906 D902 B R904 E D907 D908 C907 R908 R906 R930 R931 D2801 CN901 R933 R919 R921 R922 C902 R1009 R1010 S1003 R914 Q904 C931 H R1011 C2801 R913 R920 C909 R1008 1 8 R911 Q807 C802 R923 D903 R907 VOL- R912 S1002 E VOL+ R924 R910 R903 CH- C911 C905 C932 B G R936 Q903 S1001 R938 CH+ Q902 R918 D1004 C910 C826 QP- QP+ QP+ E E VM S1008 VM F C805 R1845 C901 CN1802 E B J KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 75 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 HU/HD BOARD SCHEMATIC DIAGRAM (KV-27FS320/32FS320/36FS320 ONLY) HD BOARD IS A SPACER BOARD (KV-32FS320/36FS320 ONLY) 1 | 2 | 3 | 4 | 5 A U — R2011 680 1/4W — D R1002 2.2k 1/4W R1003 1.5k 1/4W D2240 MTZJ-T-77-9.1B — M D2241 MTZJ-T-77-9.1B FROM HR BOARD TIMER LED 1 MPWR LED 2 GND 3 5V STBY 4 SIRCS 5 POWER 6 S1007 S TOP B C D S1008 TOP R2010 820 1/4W S2001 S2002 VOL- VOL+ R1001 6.8k 1/4W R2008 6.8k 1/4W R2009 2.2k 1/4W S2003 S2004 CH- CH+ S2005 TV/V CN1001 6P TO M BOARD — E TIMER LED 1 MPWR LED 2 5V STBY 3 SIRCS 4 POWER 5 MENU 6 KEY 7 GND 8 VIDEO 2 GND — 9 10 I-AUDIO 2L 11 I-AUDIO 2R 12 CN1003 12P D2238 MTZJ-T-77.6.2C C2240 5.0mm D2239 MTZJ-T-77-6.2C D301 RD9.1EW-T1 R2235 220 1/4W C2234 0.47 D2235 RD9.1EW-T1 R2237 220 1/4W V R2240 75 1/4W L R2236 100k 1/4W C2235 0.47 R R2238 100k 1/4W D2236 RD9.1EW-T1 F — KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 76 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 [FRONT A/V, MENU KEY] (KV-27FS320/32FS320/36FS320 ONLY) COMPONENT SIDE 1 2 HD BOARD IS A SPACER BOARD (KV-32FS320/36FS320 ONLY) 3 5 CLS1004 A 4 6 7 8 9 BA604L CLS1000 CLS1001 CLS1002 1- 863- 200- 11 B JW 1002 JW 1001 HOLE 2 JW 1000 LOC. JW 1003 172433811 >PF- LP< C 10 CLS1005 HU/HD A- 1415- 872- A OFFSET 50 TM R LED 5V STBY M PW R LED SI RCS POW ER KEY M ENU GND VI DEO 2 GND TI M ER 1 BOARD S2004 E S2005 S2001 S2002 S2003 C2004 GND D2235 D2236 5VSTBY CN1003 EY1010 SI RCS ER POW 6 M ENU/ SEL 1004 JW R2235 R2240 D301 1006 JW UP/ DOW N R2009 M POW ER CN1010 C2240 R2010 R2237 R1001 S1008 R2011 1005 JW S1007 R1002 R1003 R2008 JW 1007 D2241 D D2240 12 D2238 BA604L 1 D2239 TO AUDI O2 L CLS1003 172433811 CLS1007 1- 862- 504- 11 AUDI O2 R CLS1006 >PF- LP< A- 1415- 872- A CN1001 C2235 C2234 R2236 R2238 J 2231 CH+ TV/ V KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 VOL- VOL+ CH- 77 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 HU/HD [FRONT A/V, MENU KEY] (KV-27FS320/32FS320/36FS320 ONLY) CONDUCTOR SIDE 1 3 4 5 6 7 A 8 9 10 CLS1004 CLS1005 2 HD BOARD IS A SPACER BOARD (KV-32FS320/36FS320 ONLY) 1- 863- 200- 11 172433811 CLS1002 CLS1001 CLS1000 BA604L B R2 L2 GND V2 GND KEY MENU POWER CLS1006 12 1 CN1003 CLS1007 CLS1003 GND R2238 R L D2241 R1002 R1001 R2236 J 2231 D2240 R2237 D301 R2235 C2234 D2236 C2235 CN1010 V C2240 6 R2240 CN1001 POW ER D2235 SI RCS D2239 5V D2238 D SIRCS TI M ER M POW ER 5VSTBY 1 MPWRLED TIMERLED C E S1007 R1003 R2009 R2011 R2010 R2008 172433811 C2004 S2004 S2003 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 1- 862- 504- 11 S1008 S2002 S2001 S2005 BA604L 78 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 5-4. SEMICONDUCTORS 2SB709A-QRS-TX 2SD601A-QRS-TX 2SB734-T-34 2SC3209LK-TP 2SC3840K 2SA1309A-QRSTA 2SC3311A-QRSTA 2SD2144S-TP-UVW 2SA1837 LETTER SIDE LETTER SIDE C B E E E C B 2SA1091O-TPE2 IRF614 E C B G ERA38-06TP1 ERA82-004TP5 1SS133T-77 D1NS0R-TA MTZJ-T-77-12C MTZJ-T-77-15B MTZJ-T-77-33B MTZJ-T-77-39 CATHODE ANODE D2SB60A-F04 E C 2SK2663 D C B B 2SC4793 G D B C E 2SD2578-YB 12 S S RU-1P ERC06-15S EGP20DPKG23 MTZJ-T-77-5.1C MTZJ-T-77-5.6C MTZJ-T-77-7.5A MTZJ-T-77-10B MTZJ-T-77-30D RGP10-GPKG3 RGP02-17PKG23 RGP15GPKG23 CATHODE RD9.1EW-T1 ERB44-06TP1 1SS83TD GP08DPKG23 RGP10GPKG23 RU4AM-T3 3 MA111-TX UDZ-TE-17.5.1B UDZ-TE-17.91B CATHODE ANODE ANODE ANODE DAP202K-T-146 CATHODE D4SB60L-F 3 { ’ + 2 ~ ~ ’ 1 - 3 { ’ 2 ’ 1 D5LC20U TF541M MARKING SIDE VIEW CATHODE ANODE CATHODE CATHODE ANODE GATE KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 79 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 SECTION 6: EXPLODED VIEWS The component parts of an assembly are indicated by the reference numbers in the far right column of the parts list and within the dotted lines of the diagram. Components not identified by a part number or description are not stocked because they are seldom required for routine service. NOTE: The components identified by shading and Replace only with part number specified. ! * Items marked with an asterisk are not stocked since they are seldom required for routine service. Expect some delay when ordering these components. NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. mark are critical for safety. 6-1. CHASSIS (KV-27FS320/32FS320/36FS320 ONLY) REF. NO. 4-046-765-12 4-388-477-01 7-685-648-79 * * * * SCREW, TAPPING 7+CROWN WASHER SCREW(3X16),TAPPING,+BV WASHER SCREW +BVTP 3X12 TYPE2 TT(B) ! * 10 A-1415-870-A A-1415-872-A A-1415-873-A 4-076-951-01 1-824-069-11 6 A-1057-457-A 11 * 12 PART NO. 1 2 3 4 5 6 14 13 DESCRIPTION REF. NO. HR BOARD, MOUNTED HU BOARD, MOUNTED HD BOARD, MOUNTED HINGE, PWB CORD, AC POWER (WITH CONNECTOR) A BOARD, COMPLETE (KV-27FS320 ONLY) The high-voltage leads associated with the FBT on the A board are not included and must be ordered separately. (See 11-13) A-1058-449-A A BOARD, COMPLETE (KV-32FS320/36FS320 ONLY) The high-voltage leads associated with the FBT on the A board are not included and must be ordered separately. (See 11-13) PART NO. DESCRIPTION FBT ASSY NX-4521//X4J4 (KV-27FS320 ONLY) FBT ASSY NX-4600//X4C (KV-32FS320/36FS320 ONLY) [ASSEMBLY INCLUDES] ! 10 1-453-310-11 ! 10 1-453-338-44 ! 11 12 13 1-251-715-22 1-900-800-82 1-900-803-22 CAP ASSY, HIGH-VOLTAGE WIRE ASSY, FOCUS WIRE ASSY, G2 LEAD 14 4-089-469-11 * * * 15 16 17 A-1056-114-A 4-102-416-01 A-1054-787-A STANDOFF, HV (KV-36FS320 ONLY) HM BOARD, MOUNTED BRACKET, HM HN BOARD, MOUNTED * 18 A-1057-459-A * 18 A-1415-717-A * 19 A-1057-460-A * 19 A-1415-719-A ! ! [11-13] [11-13] 9 15 8-598-593-50 1-766-374-11 TUNER, FSS BTF-WA421 PLUG, F-PIN * 9 A-1057-456-A * 9 A-1056-113-A * 9 A-1061-529-A M (VAR) BOARD, MOUNTED (KV-27FS320 ONLY) M (VAR) BOARD, MOUNTED (KV-32FS320 ONLY) M (VAR) BOARD, MOUNTED (KV-36FS320 ONLY) ! 16 8 17 11 7 8 ! 7 18 6 19 4 2 3 5 C (VAR) BOARD, MOUNTED (KV-27FS320 ONLY) C (VAR) BOARD, MOUNTED (KV-32FS320/36FS320 ONLY) V (VAR) BOARD, MOUNTED (KV-27FS320 ONLY) V (VAR) BOARD, MOUNTED (KV-32FS320/36FS320 ONLY) 1 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 80 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 NOTE: The components identified by shading and Replace only with part number specified. ! NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. mark are critical for safety. 6-2. PICTURE TUBE (KV-27FS320/32FS320/36FS320 ONLY) REF. NO. 4-046-765-12 4-388-477-01 7-685-663-79 SCREW, TAPPING 7+CROWN WASHER SCREW(3X16),TAPPING,+BV WASHER SCREW +BVTP 4X16 TYPE2 TT(B) 47 53 52 4-102-420-01 X-2021-481-1 31 X-2021-599-1 31 X-2021-359-1 SPRING, DOOR EMBLEM, SONY NO.9 DOOR, CONTROL LABEL, FRONT TERMINAL GUIDE, LIGHT BUTTON, POWER ! 38 39 1-825-513-11 1-452-896-11 ! 39 1-452-896-61 40 4-086-875-02 LOUDSPEAKER (6X12CM) COIL, NA ROTATION (RT-200) (KV-27FS320/32FS320 ONLY) COIL, NA ROTATION (RT-200) (KV-36FS320 ONLY) SUPPORTER, CRT (KV-36FS320 ONLY) 55 50 46 41 8-735-082-05 ! 41 8-735-066-05 ! 41 8-735-090-05 ! 41 8-735-048-05 42 4-088-879-01 ! 43 8-451-494-41 ! 43 8-451-499-41 ! 43 8-451-506-22 ! 44 8-453-011-11 ! 44 8-453-007-41 45 4-036-329-01 38 45 43 42 41 40 30 32 38 34 35 36 37 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 ! 46 1-419-156-21 ! 46 1-428-988-31 ! 46 1-456-011-21 SPRING, 45MM (KV-32FS320/36FS320 ONLY) COIL, DEGAUSSING (KV-27FS320 ONLY) DEGAUSSING COIL (31 INCH 120V) (KV-32FS320 ONLY) COIL, DEGAUSSING (KV-36FS320 ONLY) 47 48 4-087-877-51 4-100-433-01 48 4-098-344-01 49 4-083-414-01 49 4-085-128-01 50 4-082-640-01 51 52 1-452-885-11 4-062-970-12 52 4-065-895-12 52 4-065-895-05 53 4-053-005-01 53 2-164-116-01 54 4-081-170-01 54 2-163-920-01 55 4-087-777-05 55 4-087-878-04 55 4-086-697-04 [32-37] CRT 29RSN(SDP) M68LNH050X (KV-27FS320 ONLY) CRT 34RSN(SDP) A80LPD50X (KV-32FS320 ONLY) CRT 38RSN(FOR SOUTH CHINA) A90LPW80X (KV-36FS320 HAWAII ONLY) CRT 38RSN A90LPW80X (KV-36FS320 US & CND ONLY) 31 39 DESCRIPTION 4-082-641-01 [32-37] * * ! PART NO. 45 [32-37] 44 33 REF. NO. [ASSEMBLY INCLUDES] GUIDE, LIGHT (MS) BEZNET ASSY (KV-27FS320 ONLY) BEZNET ASSY (KV-32FS320 ONLY) BEZNET ASSY (KV-36FS320 ONLY) 4-087-374-01 4-046-160-41 4-087-375-61 4-087-376-21 4-087-156-01 4-087-150-41 49 51 DESCRIPTION 32 33 34 35 36 37 48 54 PART NO. 30 31 CUSHION, 36 CRT SUPPORTER (KV-36FS320 ONLY) DY Y29RSA-V (KV-27FS320 ONLY) DY Y34RSA-V (KV-32FS320 ONLY) DY Y38RSA-V (KV-36FS320 ONLY) NECK ASSEMBLY NA299-M (KV-27FS320 ONLY) NECK ASSEMBLY NA324-M4 (KV-32FS320/36FS320 ONLY) SPRING (B), TENSION (KV-27FS320 ONLY) TERMINAL, BRACKET TUBE, DGC (A) (KV-32FS320 ONLY) TUBE, DGC (B) (KV-36FS320 ONLY) PIECE A(110), CONV CORRECT (KV-27FS320/32FS320 ONLY) PIECE A (100), CONV. CORRECT (KV-36FS320 ONLY) HOOK, GROUND WIRE (KV-32FS320/36FS320 ONLY) MAGNET, LANDING CLIP (29RSN), DGC (KV-27FS320 ONLY) HOLDER, DGC (KV-32FS320 ONLY) HOLDER, DGC (KV-36FS320 ONLY) SPACER, DY (KV-27FS320/32FS320 ONLY) SPACER, DY (KV-36FS320 ONLY) PLATE, TLH CORRECTION (KV-27FS320/32FS320 ONLY) PLATE, TLH CORRECTION (KV-36FS320 ONLY) COVER, REAR (KV-27FS320 ONLY) COVER, REAR (KV-32FS320 ONLY) COVER, REAR (KV-36FS320 ONLY) 81 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 NOTE: The components identified by shading and Replace only with part number specified. ! NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. mark are critical for safety. 6-3. CHASSIS (KV-32FS120/34FS120/36FS120/38FS120 ONLY) REF. NO. 4-046-765-12 4-388-477-01 * * * SCREW, TAPPING 7+CROWN WASHER SCREW(3X16),TAPPING,+BV WASHER 10 1 2 3 4 PART NO. A-1415-723-A 4-089-054-41 4-076-951-01 1-500-586-11 ! 5 1-824-069-11 ! 5 1-757-840-13 11 12 DESCRIPTION HS BOARD, MOUNTED BOARD, BOTTOM HINGE, PWB FILTER, CLAMP (FERRITE CORE) (KV-34FS120 LATIN SOUTH ONLY) REF. NO. DESCRIPTION * 7 8 9 8-598-593-50 1-766-374-11 A-1415-721-A * 9 A-1060-077-A TUNER, FSS BTF-WA421 PLUG, F-PIN M (VAR) BOARD, MOUNTED (KV-32FS120/34FS120 ONLY) M (VAR) BOARD, MOUNTED (KV-36FS120/38FS120 ONLY) 10 11 12 13 1-453-338-41 1-251-715-22 1-900-800-82 1-900-803-22 FBT ASSY NX-4600//X4J4 CAP ASSY, HIGH-VOLTAGE WIRE ASSY, FOCUS WIRE ASSY, G2 LEAD 14 4-089-469-11 15 16 A-1415-717-A A-1415-719-A STANDOFF, HV (KV-36FS120/38FS120 ONLY) C (VAR) BOARD, MOUNTED V (VAR) BOARD, MOUNTED ! ! CORD, AC POWER(WITH CONNECTOR) (ALL EXCEPT KV-34FS120 LATIN SOUTH) CORD, POWER (WITH CONNECTOR) (KV-34FS120 LATIN SOUTH ONLY) ! ! ! ! * 6 13 9 14 * 8 11 7 15 6 A BOARD, COMPLETE (ALL EXCEPT KV-34FS120 LATIN SOUTH) The high-voltage leads associated with the FBT on the A board are not included and must be ordered separately. (See 11-13) A-1056-321-A A BOARD, COMPLETE (KV-34FS120 LATIN SOUTH ONLY) The high-voltage leads associated with the FBT on the A board are not included and must be ordered separately. (See 11-13) [ASSEMBLY INCLUDES] PART NO. [11-13] A-1302-981-A * * 6 16 5 4 1 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 2 3 82 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 NOTE: The components identified by shading and Replace only with part number specified. ! NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. mark are critical for safety. 6-4. PICTURE TUBE (KV-32FS120/34FS120/36FS120/38FS120 ONLY) REF. NO. 4-046-765-12 4-388-477-01 7-685-663-79 7-685-648-79 30 SCREW, TAPPING 7+CROWN WASHER SCREW(3X16),TAPPING,+BV WASHER SCREW +BVTP 4X16 TYPE2 TT(B) SCREW +BVTP 3X12 TYPE2 TT(B) [ASSEMBLY INCLUDES] 46 4-046-160-31 4-089-056-11 32 4-089-056-21 33 34 35 4-089-016-01 4-089-058-01 4-089-057-11 35 4-089-057-21 ! 36 37 1-825-206-11 1-452-896-11 ! 37 1-452-896-61 38 4-089-063-03 38 4-089-064-03 ! 39 ! 39 ! 39 ! 39 8-735-066-05 CRT 34RSN(SDP) (A80LPD50X) (KV-32FS120 & KV-34FS120 LATIN NORTH ONLY) 8-735-050-05 CRT 34RSN(FOR EQUATORIAL AREA) (A80LPD80X) (KV-34FS120 LATIN SOUTH ONLY) 8-735-090-05 CRT 38RSN(FOR SOUTH CHINA) (A90LPW80X) (KV-36FS120 HAWAII & KV-38FS120 LATIN NORTH ONLY) 8-735-048-05 CRT 38RSN (A90LPW80X) (KV-36FS120 US & CND ONLY) ! 40 8-451-499-41 ! 40 8-451-506-22 ! 41 8-453-007-41 43 41 36 40 42 30 39 38 37 31 LABEL, DOOR GUIDE, LED BUTTON, POWER (KV-32FS120/34FS120 ONLY) BUTTON, POWER (KV-36FS120/38FS120 ONLY) 32 33 34 35 36 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 LOUDSPEAKER (6X12CM) COIL, NA ROTATION (RT-200) (KV-32FS120/34FS120 ONLY) COIL, NA ROTATION (RT-200) (KV-36FS120/38FS120 ONLY) SUPPORTER, CRT (KV-32FS120/34FS120 ONLY) SUPPORTER, CRT (KV-36FS120/38FS120 ONLY) DY Y34RSA-V (KV-32FS120/34FS120 ONLY) DY Y38RSA-V (KV-36FS120/38FS120 ONLY) NECK ASSEMBLY NA324-M4 DESCRIPTION 4-082-641-01 4-083-303-01 SPRING, 45MM SPRING, METAL ! 43 ! 43 ! 43 1-428-988-31 DEGAUSSING COIL (31 INCH 120V) (KV-32FS120 & KV-34FS120 LATIN NORTH ONLY) 1-428-990-11 DEGAUSSING COIL (34 220V) (KV-34FS120 LATIN SOUTH ONLY) 1-456-011-21 COIL, DEGAUSSING (KV-36FS120/38FS120 ONLY) [31-35] 51 47 PART NO. 42 42 * 31 32 45 REF. NO. [31-35] X-2021-304-1 50 49 DESCRIPTION BEZNET ASSY (KV-32FS120/34FS120 ONLY) BEZNET ASSY (KV-36FS120/38FS120 ONLY) EMBLEM, SONY NO.9 DOOR (KV-32FS120/34FS120 ONLY) DOOR (KV-36FS120/38FS120 ONLY) 30 44 48 PART NO. X-2021-381-1 44 4-100-433-01 44 4-098-344-01 45 4-083-414-01 45 4-085-128-01 46 47 48 4-082-640-01 1-452-885-11 4-065-895-12 48 4-065-895-05 49 4-053-005-01 49 2-164-116-01 50 4-081-170-01 50 2-163-920-01 51 4-089-051-41 51 4-089-052-41 TUBE, DGC (A) (KV-32FS120/34FS120 ONLY) TUBE, DGC (B) (KV-36FS120/38FS120 ONLY) PIECE A(110), CONV CORRECT (KV-32FS120/34FS120 ONLY) PIECE A (100), CONV. CORRECT (KV-36FS120/38FS120 ONLY) HOOK, GROUND WIRE MAGNET, LANDING HOLDER, DGC (KV-32FS120/34FS120 ONLY) HOLDER, DGC (KV-36FS120/38FS120 ONLY) SPACER, DY (KV-32FS120/34FS120 ONLY) SPACER, DY (KV-36FS120/38FS120 ONLY) PLATE, TLH CORRECTION (KV-32FS120/34FS120 ONLY) PLATE, TLH CORRECTION (KV-36FS120/38FS120 ONLY) COVER, REAR (KV-32FS120/34FS120 ONLY) COVER, REAR (KV-36FS120/38FS120 ONLY) 83 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 SECTION 7: ELECTRICAL PARTS LIST NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. The components in this manual identified by the following indicate parts that have been carefully factorysymbol: selected to satisfy regulations regarding X-ray radiation for each set. Should replacement be required for one of these components, replace only with the value originally used. NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. REF. NO. A PART NO. * Items marked with an asterisk are not stocked since they are seldom required for routine service. Expect some delay when ordering these components. DESCRIPTION REF. NO. VALUES * A-1057-457-A A BOARD, COMPLETE (KV-27FS320 ONLY) * A-1302-981-A A BOARD, COMPLETE (KV-32FS120/36FS120/38FS120 ONLY) (KV-34FS120 L. NORTH ONLY) * A-1056-321-A A BOARD, COMPLETE (KV-34FS120 L. SOUTH ONLY) * A-1058-449-A A BOARD, COMPLETE (KV-32FS320/36FS320 ONLY) ! ! ! 1-251-715-22 1-900-800-82 1-900-803-22 CAP ASSY, HIGH-VOLTAGE WIRE ASSY, FOCUS WIRE ASSY, G2 LEAD * 4-374-846-11 4-382-854-11 COVER, CAPACITOR, CAP TYPE SCREW (M3X10), P, SW (+) C203 C206 C207 C208 C209 1-107-826-11 1-107-826-11 1-107-826-11 1-107-826-11 1-107-826-11 C212 C213 C307 1-126-963-11 ELECT 1-126-963-11 ELECT 1-126-964-11 ELECT (KV-27FS320/32FS320/36FS320 ONLY) 1-126-964-11 ELECT (KV-27FS320/32FS320/36FS320 ONLY) 4.7µF 4.7µF 10µF 20% 20% 20% 50V 50V 50V 10µF 20% 50V 1-107-826-11 CERAMIC CHIP 1-126-964-11 ELECT (KV-27FS320/32FS320/36FS320 ONLY) 1-126-964-11 ELECT (KV-27FS320/32FS320/36FS320 ONLY) 0.1µF 10µF 10% 20% 16V 50V 10µF 20% 50V 1-126-964-11 ELECT (KV-27FS320/32FS320/36FS320 ONLY) 1-126-964-11 ELECT (KV-27FS320/32FS320/36FS320 ONLY) 1-126-964-11 ELECT 10µF 20% 50V 10µF 20% 50V 10µF 20% 50V C365 C366 C367 C368 C373 1-162-117-00 CERAMIC 1-126-964-11 ELECT 1-107-826-11 CERAMIC CHIP 1-126-964-11 ELECT 1-126-947-11 ELECT (KV-27FS320 ONLY) 100pF 10µF 0.1µF 10µF 47µF 10% 20% 10% 20% 20% 500V 50V 16V 50V 35V C373 100µF 20% 25V 0.1µF 10% 16V C400 1-104-665-11 ELECT (KV-32FS320/36FS320 ONLY) 1-107-826-11 CERAMIC CHIP (KV-27FS320/32FS320/36FS320 ONLY) 1-128-934-91 CERAMIC CHIP 0.33µF 20% 10V C401 C402 C403 1-164-227-11 1-164-174-11 1-162-967-11 0.022µF 10% 0.0082µF 10% 0.0033µF 10% 25V 25V 50V C309 C310 C315 C362 1-126-964-11 1-126-935-11 1-126-933-11 1-162-968-11 1-107-826-11 ELECT ELECT ELECT CERAMIC CHIP CERAMIC CHIP 10µF 470µF 100µF 0.0047µF 0.1µF 20% 20% 20% 10% 10% 50V 16V 16V 50V 16V C054 C055 C056 C057 C059 1-126-967-11 1-126-933-11 1-135-834-91 1-135-834-91 1-107-826-11 ELECT ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 47µF 100µF 2.2µF 2.2µF 0.1µF 20% 20% 10% 50V 16V 6.3V 6.3V 16V C080 C081 C200 C201 C202 1-128-934-91 1-128-934-91 1-107-826-11 1-107-826-11 1-107-826-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.33µF 0.33µF 0.1µF 0.1µF 0.1µF 20% 20% 10% 10% 10% 10V 10V 16V 16V 16V KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 C374 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP VALUES 16V 16V 16V 16V 16V C314 C049 C050 C051 C052 C053 DESCRIPTION 10% 10% 10% 10% 10% C312 CAPACITOR When ordering parts by reference number, please include the board name. 0.1µF 0.1µF 0.1µF 0.1µF 0.1µF C308 The high-voltage leads associated with the FBT on the A board are not included and must be ordered separately. Order the following leads when requesting this A Board: PART NO. A RESISTORS • All resistors are in ohms • F : nonflammable • All variable and adjustable resistors have characteristic curve B, unless otherwise noted. CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 84 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. C404 C405 C406 C407 C408 1-162-967-11 1-164-677-11 1-164-677-11 1-115-412-11 1-115-412-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.0033µF 0.033µF 0.033µF 680pF 680pF 10% 10% 10% 5% 5% 50V 16V 16V 25V 25V ! C511 C409 C410 C411 C412 C413 1-125-891-11 1-125-891-11 1-128-934-91 1-126-961-11 1-126-960-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT 0.47µF 0.47µF 0.33µF 2.2µF 1µF 10% 10% 20% 20% 20% 10V 10V 10V 50V 50V ! C513 C414 C415 C416 C417 C418 1-126-960-11 1-126-960-11 1-126-960-11 1-115-416-11 1-126-963-11 ELECT ELECT ELECT CERAMIC CHIP ELECT 1µF 1µF 1µF 0.001µF 4.7µF 20% 20% 20% 5% 20% 50V 50V 50V 25V 50V C420 C421 1-126-960-11 ELECT 1-107-826-11 CERAMIC CHIP (KV-27FS320/32FS320/36FS320 ONLY) 1-126-947-11 ELECT 1-107-826-11 CERAMIC CHIP (KV-27FS320/32FS320/36FS320 ONLY) 1µF 0.1µF 20% 10% 50V 16V 47µF 0.1µF 20% 10% 35V 16V C450 C451 C456 C458 C461 1-100-120-51 1-137-194-81 1-107-826-11 1-107-826-11 1-126-965-91 ELECT FILM CERAMIC CHIP CERAMIC CHIP ELECT 1000µF 0.47µF 0.1µF 0.1µF 22µF 20% 5% 10% 10% 20% C463 C466 C467 C468 C470 1-126-963-11 1-126-935-11 1-126-935-11 1-126-935-11 1-126-935-11 ELECT ELECT ELECT ELECT ELECT 4.7µF 470µF 470µF 470µF 470µF C472 C473 C476 C480 C502 1-126-935-11 1-125-891-11 1-126-964-11 1-126-960-11 1-126-959-11 ELECT CERAMIC CHIP ELECT ELECT ELECT C503 C504 C505 C506 ! C507 1-164-315-11 1-102-228-00 1-102-228-00 1-106-383-00 1-162-116-00 ! C509 C510 1-162-116-00 1-137-150-11 C422 C423 A NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. ! C511 C512 ! C513 ! C514 ! C514 C515 ! C516 ! C516 PART NO. DESCRIPTION 1-136-086-00 FILM (KV-27FS320 ONLY) 1-117-652-00 FILM (ALL EXCEPT KV-27FS320) 1-164-315-11 CERAMIC CHIP 1-129-722-00 FILM (KV-27FS320 ONLY) 1-130-118-91 FILM (ALL EXCEPT KV-27FS320) 1-109-844-11 FILM (KV-27FS320 ONLY) 1-115-521-11 FILM (ALL EXCEPT KV-27FS320) 1-104-987-11 MYLAR 1-115-521-11 FILM (KV-27FS320 ONLY) VALUES 17000pF 3% 1.2KV 22000pF 3% 1.2KV 470pF 50V 5% 0.047µF 5% 630V 0.051µF 5% 400V 0.68µF 5% 400V 0.82µF 5% 250V 0.001µF 5% 0.82µF 5% 200V 250V 1.2µF 250V C517 C518 C519 1-115-356-11 FILM (ALL EXCEPT KV-27FS320) 1-107-649-11 ELECT 1-106-387-00 MYLAR 1-102-244-00 CERAMIC 2.2µF 20% 0.068µF 10% 220pF 10% 250V 200V 500V 35V 50V 16V 16V 50V C520 C522 C523 C525 C526 1-165-136-11 1-126-960-11 1-126-934-11 1-102-244-00 1-107-662-11 CERAMIC ELECT ELECT CERAMIC ELECT 3300pF 1µF 220µF 220pF 22µF 10% 20% 20% 10% 20% 500V 50V 16V 500V 350V 20% 20% 20% 20% 20% 50V 16V 16V 16V 16V ! C527 C528 C529 C530 C531 1-162-116-00 1-162-966-11 1-104-662-91 1-164-690-91 1-126-965-91 CERAMIC CERAMIC CHIP ELECT CERAMIC CHIP ELECT 680pF 0.0022µF 22µF 0.0022µF 22µF 10% 10% 20% 5% 20% 2KV 50V 25V 50V 50V 470µF 0.47µF 10µF 1µF 0.47µF 20% 10% 20% 20% 20% 16V 10V 50V 50V 50V C532 C534 C535 C537 C539 1-126-965-91 1-126-967-11 1-107-826-11 1-126-941-11 1-126-941-11 ELECT ELECT CERAMIC CHIP ELECT ELECT 22µF 47µF 0.1µF 470µF 470µF 20% 20% 10% 20% 20% 50V 50V 16V 25V 25V CERAMIC CHIP CERAMIC CERAMIC MYLAR CERAMIC 470pF 470pF 470pF 0.047µF 680pF 5% 10% 10% 10% 10% 50V 500V 500V 200V 2KV C540 C541 C545 C546 1-131-867-51 ELECT 1-128-560-11 ELECT 1-106-387-00 MYLAR 1-104-987-11 MYLAR (ALL EXCEPT KV-27FS320) 100µF 22µF 20% 0.068µF 10% 0.001µF 5% 160V 100V 200V 200V CERAMIC FILM 680pF 0.01µF 10% 5% 2KV 100V C547 1-104-987-11 MYLAR (ALL EXCEPT KV-27FS320) 0.001µF 5% 200V KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 5% 85 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. ! C553 ! C553 ! C554 ! C554 C561 C563 C565 C568 ! C581 C588 C590 C600 ! C601 C602 ! C603 C604 ! C608 C609 C612 C613 C614 C615 C616 C617 C619 C620 C621 C621 ! C622 C629 C629 PART NO. DESCRIPTION 1-117-412-11 FILM (KV-27FS320 ONLY) 1-117-661-11 FILM (ALL EXCEPT KV-27FS320) 1-117-629-11 FILM (KV-27FS320 ONLY) 1-117-635-11 FILM (ALL EXCEPT KV-27FS320) 1-126-967-11 ELECT 1-104-666-11 ELECT 1-126-969-11 ELECT VALUES REF. NO. 0.24µF 5% 250V 0.15µF 5% 250V 2700pF 3% 1.2KV 4700pF 3% 1.2KV 47µF 220µF 220µF 20% 20% 20% 50V 25V 50V 1-137-190-91 FILM 1-165-529-11 MYLAR 1-130-491-00 MYLAR 1-126-964-11 ELECT 1-117-703-11 MYLAR (KV-34FS120 L. SOUTH ONLY) 0.22µF 0.22µF 0.047µF 10µF 0.47µF 1-165-529-11 1-162-970-11 1-165-529-11 1-164-625-11 1-119-912-51 0.22µF 0.01µF 0.22µF 680pF 0.001µF MYLAR CERAMIC CHIP MYLAR CERAMIC CERAMIC A NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. 5% 10 5% 20% 10 10 10% 10 10% 20% 50V 275V 50V 50V 250V 275V 25V 275V 500V 125V 1-164-625-11 CERAMIC 1-104-665-11 ELECT 1-117-214-11 CERAMIC (KV-34FS120 L. SOUTH ONLY) 1-117-214-11 CERAMIC (KV-34FS120 L. SOUTH ONLY) 680pF 10% 100µF 20% 0.001µF 10% 500V 25V 2KV 0.001µF 10% 2KV 1-117-214-11 CERAMIC (KV-34FS120 L. SOUTH ONLY) 1-126-943-11 ELECT 1-123-024-21 ELECT 1-117-214-11 CERAMIC (KV-34FS120 L. SOUTH ONLY) 0.001µF 10% 2KV 2200µF 20% 33µF 0.001µF 10% 25V 160V 2KV PART NO. DESCRIPTION VALUES C632 C633 C634 C635 C637 1-126-943-11 1-136-479-11 1-126-964-11 1-126-963-11 1-136-165-00 ELECT FILM ELECT ELECT FILM 2200µF 0.001µF 10µF 4.7µF 0.1µF 20% 5% 20% 20% 5% 25V 100V 50V 50V 50V C638 C642 C643 C645 C647 1-126-943-11 1-126-969-11 1-136-165-00 1-162-964-11 1-126-947-11 ELECT ELECT FILM CERAMIC CHIP ELECT 2200µF 220µF 0.1µF 0.001µF 47µF 20% 20% 5% 10% 20% 25V 50V 50V 50V 35V C648 C649 C650 C651 1-164-143-11 CERAMIC 1-164-143-11 CERAMIC 1-100-120-51 ELECT 1-126-942-61 ELECT (ALL EXCEPT KV-34FS120 L. SOUTH) 0.001µF 0.001µF 1000µF 1000µF 10% 10% 20% 20% 1KV 1KV 35V 25V C651 2200µF 20% 25V C652 C653 C656 1-126-943-61 ELECT (KV-34FS120 L. SOUTH ONLY) 1-162-970-11 CERAMIC CHIP 1-126-964-11 ELECT 1-161-964-91 CERAMIC 0.01µF 10% 10µF 20% 0.0047µF 25V 50V 250V C658 C661 C669 C670 C672 1-161-964-91 1-126-947-11 1-164-625-11 1-164-625-11 1-165-953-11 0.0047µF 47µF 680pF 680pF 47000pF 20% 10% 10% 3% 250V 35V 500V 500V 800V C690 C1501 1-126-971-11 ELECT 1-107-846-11 FILM (ALL EXCEPT KV-27FS320) 470µF 0.1µF 20% 5% 50V 400V CERAMIC ELECT CERAMIC CERAMIC FILM CONNECTOR 1-162-970-11 CERAMIC CHIP 0.01µF 1-100-961-11 ELECT 680µF (KV-27FS320/32FS320/36FS320 ONLY) 1-117-894-11 ELECT 560µF (KV-32FS120/34FS120/36FS120/38FS120 ONLY) 10% 20% 25V 250V 20% 250V 1-119-912-51 CERAMIC 0.001µF 20% 1-100-961-11 ELECT 680µF 20% (KV-27FS320/32FS320/36FS320 ONLY) 1-117-894-11 ELECT 560µF 20% (KV-32FS120/34FS120/36FS120/38FS120 ONLY) 125V 250V KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 250V CN202 * * * CN401 CN501 CN503 CN505 * CN508 *! CN600 CN601 1-695-915-11 TAB (CONTACT) (KV-27FS320/32FS320/36FS320 ONLY) 1-564-507-11 PLUG, CONNECTOR 4P 1-580-798-11 CONNECTOR PIN (DY) 6P 1-564-510-11 PLUG, CONNECTOR 7P 1-785-879-11 1-573-963-11 1-580-843-11 1-695-915-11 CONNECTOR, ONE TOUCH PIN, CONNECTOR (PC BOARD) PIN, CONNECTOR (POWER) TAB (CONTACT) DIODE D009 D200 D201 D209 8-719-982-22 8-719-069-60 8-719-069-60 8-719-069-60 DIODE DIODE DIODE DIODE MTZJ-30D UDZSTE-179.1B UDZSTE-179.1B UDZSTE-179.1B 86 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION A NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. VALUES REF. NO. PART NO. DESCRIPTION VALUES D210 D211 D212 D213 D218 8-719-069-60 8-719-069-60 8-719-069-60 8-719-510-02 8-719-929-15 DIODE DIODE DIODE DIODE DIODE UDZSTE-179.1B UDZSTE-179.1B UDZSTE-179.1B D1NS4 HZS9.1NB2 D501 ! D503 D504 D505 D506 8-719-404-50 8-719-081-00 6-500-485-01 8-719-908-03 8-719-908-03 DIODE DIODE DIODE DIODE DIODE MA111-TX BY228/A52A/ FR305G-EB GP08D GP08D D219 D305 D306 D307 D308 8-719-929-15 8-719-070-62 8-719-070-62 8-719-070-62 8-719-977-28 DIODE DIODE DIODE DIODE DIODE HZS9.1NB2 PDZ9.1B-115 PDZ9.1B-115 PDZ9.1B-115 DTZ10B D508 D509 ! D515 D516 D518 8-719-404-50 8-719-404-50 8-719-075-41 8-719-404-50 8-719-404-50 DIODE DIODE DIODE DIODE DIODE MA111-TX MA111-TX PR1004GT MA111-TX MA111-TX D309 8-719-069-60 DIODE UDZSTE-179.1B (ALL EXCEPT 27FS320/34FS120 L. SOUTH) 8-719-108-12 DIODE RD9.1EW (KV-32FS120/34FS120/36FS120/38FS120 ONLY) 8-719-069-60 DIODE UDZSTE-179.1B (ALL EXCEPT 27FS320/34FS120 L. SOUTH) ! D519 D520 D521 D522 D525 8-719-302-43 8-719-404-50 8-719-921-63 8-719-404-50 8-719-404-50 DIODE DIODE DIODE DIODE DIODE EL1Z MA111-TX MTZJ-7.5B MA111-TX MA111-TX D526 ! D530 D531 D534 D535 8-719-404-50 6-500-531-01 6-500-531-01 8-719-074-25 8-719-404-50 DIODE DIODE DIODE DIODE DIODE MA111-TX PG154R PG154R PG104R MA111-TX D551 D561 D580 D588 D589 8-719-069-55 8-719-075-33 8-719-991-33 8-719-404-50 8-719-404-50 DIODE DIODE DIODE DIODE DIODE UDZSTE-175.6B 1N4003GA 1SS133T-77 MA111-TX MA111-TX D590 D600 D602 D611 D612 8-719-404-50 DIODE 8-719-510-53 DIODE 8-719-064-12 DIODE 8-719-062-40 DIODE 8-719-068-00 DIODE (ALL EXCEPT KV-34FS120 L. SOUTH) MA111-TX D4SB60L S1NB60-4062 D4SBL20UF3 ERC04-06SE D613 ERC04-06SE D614 D615 D618 8-719-068-00 DIODE (ALL EXCEPT KV-34FS120 L. SOUTH) 8-719-057-52 DIODE 8-719-062-40 DIODE 8-719-979-64 DIODE D620 D621 D628 D629 D631 8-719-404-50 6-500-181-01 8-719-404-50 8-719-083-82 6-500-567-01 DIODE DIODE DIODE DIODE DIODE MA111-TX MA6D50 MA111-TX UDZS-TE17-12B 10ERB20-TA1B2 D640 D641 D645 8-719-404-50 8-719-404-50 6-500-567-01 DIODE DIODE DIODE MA111-TX MA111-TX 10ERB20-TA1B2 D310 D311 D318 D319 D320 D321 D322 D323 D324 8-719-069-60 DIODE (KV-27FS320/32FS320/36FS320 ONLY) 8-719-069-60 DIODE (KV-27FS320/32FS320/36FS320 ONLY) 8-719-069-60 DIODE (KV-27FS320/32FS320/36FS320 ONLY) UDZSTE-179.1B 8-719-069-60 DIODE (KV-27FS320/32FS320/36FS320 ONLY) 8-719-069-60 DIODE (KV-27FS320/32FS320/36FS320 ONLY) 8-719-069-60 DIODE (KV-27FS320/32FS320/36FS320 ONLY) UDZSTE-179.1B UDZSTE-179.1B UDZSTE-179.1B UDZSTE-179.1B UDZSTE-179.1B D400 8-719-069-60 DIODE UDZSTE-179.1B (KV-32FS120/34FS120/36FS120/38FS120 ONLY) 8-719-069-60 DIODE UDZSTE-179.1B (KV-32FS120/34FS120/36FS120/38FS120 ONLY) 8-719-404-50 DIODE MA111-TX D401 D402 D405 D414 D418 8-719-069-60 8-719-069-60 8-719-404-50 8-719-921-63 1-216-864-11 DIODE DIODE DIODE DIODE SHORT CHIP UDZSTE-179.1B UDZSTE-179.1B MA111-TX MTZJ-7.5B D422 D423 D424 D425 D500 1-216-809-11 8-719-404-50 8-719-404-50 8-719-056-84 8-719-081-00 METAL CHIP DIODE DIODE DIODE DIODE 100 5% 1/10W MA111-TX MA111-TX UDZ-TE-17-7.5B BY228/A52A/ D325 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 EZ0150AV1 D4SBL20UF3 UF4005PKG23 87 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. D646 D647 D651 D690 PART NO. 8-719-404-50 6-500-567-01 8-719-109-93 8-719-982-13 DESCRIPTION DIODE DIODE DIODE DIODE VALUES REF. NO. MA111-TX 10ERB20-TA1B2 RD6.2ESB2 MTZJ-27 * * ! F601 6.3A 125V 6.3A 250V FERRITE BEAD FB501 FB502 FB503 FB505 FB602 1-412-911-11 1-412-911-11 1-412-911-11 1-412-911-11 1-412-911-11 FERRITE FERRITE FERRITE FERRITE FERRITE 0µH 0µH 0µH 0µH 0µH FB604 FB613 FB614 FB616 FB617 1-412-911-11 1-410-397-21 1-412-911-11 1-412-911-11 1-412-911-11 FERRITE FERRITE FERRITE FERRITE FERRITE 0µH 1.1µH 0µH 0µH 0µH FB650 FB651 FB652 FB653 1-412-911-11 1-412-911-11 1-412-911-11 1-412-911-11 FERRITE FERRITE FERRITE FERRITE 0µH 0µH 0µH 0µH FUSE HOLDER FUSE HOLDER 0A 0V 0A 0V FUSE HOLDER ! FH1 ! FH2 1-533-223-11 1-533-223-11 IC400 IC401 IC501 ! IC561 ! IC561 IC600 IC601 IC609 J207 8-759-353-00 IC 8-759-443-11 IC (KV-27FS320/32FS320/36FS320 ONLY) 6-703-190-01 IC 6-705-054-01 IC NJM2534M(TE2) NJM2283M-TE1 8-759-700-07 IC 8-759-980-58 IC (KV-27FS320 ONLY) 8-759-696-71 IC (ALL EXCEPT KV-27FS320) NJM2903M TDA8172 6-705-810-01 8-749-012-13 8-759-653-07 MCZ3001DB DM-58 PQ09RD21 IC IC IC DESCRIPTION VALUES NJW1134AGK1-TE2 TDA8947J 1-818-351-11 S TERMINAL-PIN JACK BLOCK 1-818-012-11 PIN JACK BLOCK 10P (KV-27FS320/32FS320/36FS320 ONLY) 1-817-461-11 JACK BLOCK, PIN 5P (KV-32FS120/34FS120/36FS120/38FS120 ONLY) 1-794-116-11 JACK BLOCK, PIN 2P CHIP CONDUCTOR JR1 JR3 JR4 JR9 JR10 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 JR16 JR332 1-216-864-11 SHORT CHIP 1-216-864-11 SHORT CHIP (KV-32FS120/34FS120/36FS120/38FS120 ONLY) 1-216-864-11 SHORT CHIP (KV-32FS120/34FS120/36FS120/38FS120 ONLY) JR334 JR335 JR444 JR445 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 1-216-864-11 SHORT CHIP (KV-32FS120/34FS120/36FS120/38FS120 ONLY) 1-216-864-11 SHORT CHIP 1-216-864-11 SHORT CHIP COIL L003 L004 L009 L501 L502 INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR 10µH 100µH 100µH 10MH 2.2MH 1-406-677-11 INDUCTOR 1-406-978-11 INDUCTOR (ALL EXCEPT KV-27FS320) 1-419-714-11 INDUCTOR (KV-27FS320 ONLY) 10MH 150µH L511 L515 L517 L604 L605 1-409-955-31 1-412-529-11 1-412-552-11 1-412-525-31 1-412-911-11 INDUCTOR INDUCTOR INDUCTOR INDUCTOR FERRITE 8MH 22µH 2.2MH 10µH 0µH L606 L608 L609 1-412-911-11 1-412-529-11 1-412-529-11 FERRITE INDUCTOR INDUCTOR 0µH 22µH 22µH L503 ! L505 IC IC302 IC303 J201 J205 J206 1-576-193-11 FUSE (ALL EXCEPT KV-34FS120 L. SOUTH) 1-532-506-51 FUSE (KV-34FS120 L. SOUTH ONLY) PART NO. JACK FUSE ! F601 A NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. ! L505 1-414-856-11 1-414-857-11 1-414-857-11 1-406-677-11 1-412-552-11 100µH STV9379A KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 88 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. 8-749-924-35 PHOTO COUPLER ON3171-R IC LINK 2.7A IC LINK PS401 1-576-337-21 PART NO. DESCRIPTION VALUES RESISTOR PHOTO COUPLER ! PH602 A NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. 50V TRANSISTOR R84 R085 R086 R087 R089 1-249-377-11 1-215-924-00 1-216-839-11 1-216-837-11 1-216-829-11 CARBON METAL OXIDE METAL CHIP METAL CHIP METAL CHIP 0.47 15K 33K 22K 4.7K 5% 5% 5% 5% 5% 1/4W 3W 1/10W 1/10W 1/10W R099 R107 R108 R202 R206 1-216-809-11 1-216-809-11 1-216-809-11 1-216-813-11 1-216-813-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100 100 100 220 220 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R207 R208 R209 R210 R217 1-216-845-11 1-216-813-11 1-216-845-11 1-216-813-11 1-216-845-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100K 220 100K 220 100K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R218 R219 R220 R222 R223 1-216-845-11 1-216-813-11 1-216-813-11 1-216-845-11 1-216-813-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100K 220 220 100K 220 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R224 R225 R232 R233 R234 1-216-813-11 1-216-845-11 1-216-853-11 1-216-853-11 1-216-813-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 220 100K 470K 470K 220 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R235 R301 R302 R303 R315 1-216-813-11 METAL CHIP 1-216-809-11 METAL CHIP 1-218-839-11 METAL CHIP 1-218-841-11 METAL CHIP 1-218-285-11 METAL CHIP (KV-27FS320/32FS320/36FS320 ONLY) 220 100 470 560 75 5% 5% 0.50% 0.50% 5% 1/10W 1/10W 1/10W 1/10W 1/10W 75 5% 1/10W 75 5% 1/10W 10K 5% 1/10W 100 1K 10K 5% 5% 5% 1/10W 1/10W 1/10W Q005 Q300 Q304 Q401 Q402 8-729-422-27 8-729-424-02 8-729-422-27 8-729-422-27 8-729-422-27 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SB709A-QRS-TX 2SD601A-Q 2SD601A-Q 2SD601A-Q Q403 Q405 Q412 Q466 Q467 8-729-422-27 8-729-120-28 8-729-422-27 8-729-424-02 8-729-424-02 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SC1623-L5L6 2SD601A-Q 2SB709A-QRS-TX 2SB709A-QRS-TX Q468 Q469 Q470 Q471 Q472 8-729-424-02 8-729-424-02 8-729-424-02 8-729-422-27 8-729-422-27 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SB709A-QRS-TX 2SB709A-QRS-TX 2SB709A-QRS-TX 2SD601A-Q 2SD601A-Q Q501 ! Q502 Q509 ! Q511 ! Q512 8-729-140-50 6-550-107-01 8-729-422-27 8-729-422-27 8-729-809-29 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC3209LK 2SD2645-YB 2SD601A-Q 2SD601A-Q 2SC4159-E Q530 Q531 Q532 Q561 Q562 8-729-422-27 8-729-424-02 6-550-362-01 8-729-422-27 8-729-424-02 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SB709A-QRS-TX KTA1279 2SD601A-Q 2SB709A-QRS-TX Q564 Q582 Q583 Q600 Q601 8-729-422-27 8-729-422-27 8-729-424-02 8-729-052-32 8-729-052-32 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SD601A-Q 2SB709A-QRS-TX IRFIB7N50A-LF31 IRFIB7N50A-LF31 R316 R328 1-218-285-11 METAL CHIP (KV-27FS320/32FS320/36FS320 ONLY) 1-218-285-11 METAL CHIP (KV-27FS320/32FS320/36FS320 ONLY) 1-216-833-11 METAL CHIP Q605 Q606 Q608 Q611 Q690 Q691 8-729-140-96 8-729-422-27 8-729-922-37 6-550-409-01 8-729-424-02 8-729-026-39 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD774-34 2SD601A-Q 2SD2144S-UVW KSC2383-O 2SB709A-QRS-TX 2SA933AS-QT R334 R335 R359 R367 R369 1-216-809-11 1-216-821-11 1-216-833-11 1-216-864-11 1-216-864-11 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 R317 METAL CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP 89 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. R390 R391 R393 R394 R400 1-218-285-11 1-218-285-11 1-218-285-11 1-218-285-11 1-216-829-11 R401 R402 DESCRIPTION VALUES REF. NO. PART NO. 75 75 75 75 4.7K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R482 R483 R484 R485 R488 1-216-833-11 1-216-825-11 1-249-429-11 1-216-809-11 1-216-825-11 1-216-809-11 METAL CHIP 1-216-845-11 METAL CHIP (KV-27FS320/32FS320/36FS320 ONLY) 1-247-807-31 CARBON 1-216-845-11 METAL CHIP (KV-27FS320/32FS320/36FS320 ONLY) 100 100K 5% 5% 1/10W 1/10W 100 100K 5% 5% 1/4W 1/10W R500 R502 R503 R504 R504 R405 R406 R408 R410 1-216-825-11 METAL CHIP 1-249-393-11 CARBON 1-216-825-11 METAL CHIP 1-216-813-11 METAL CHIP (KV-27FS320/32FS320/36FS320 ONLY) 2.2K 10 2.2K 220 5% 5% 5% 5% 1/10W 1/4W 1/10W 1/10W R411 R414 10 220 5% 5% 1/4W 1/10W R416 R422 1-249-393-11 CARBON 1-216-813-11 METAL CHIP (KV-27FS320/32FS320/36FS320 ONLY) 1-216-829-11 METAL CHIP 1-218-867-11 METAL CHIP 4.7K 6.8K 5% 1/10W 0.50% 1/10W R424 R425 R429 R450 R457 1-216-821-11 1-216-823-11 1-216-841-11 1-216-833-11 1-216-809-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 1K 1.5K 47K 10K 100 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R458 R463 R464 R466 R467 1-216-809-11 1-216-864-11 1-216-837-11 1-216-837-11 1-216-837-11 METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP 100 5% 22K 22K 22K R468 R469 R470 R471 R472 1-216-837-11 1-216-837-11 1-216-837-11 1-216-837-11 1-249-441-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP CARBON R473 R474 R475 R477 R478 1-216-837-11 1-216-837-11 1-216-841-11 1-216-819-11 1-216-833-11 R479 R480 R481 1-216-821-11 1-216-809-11 1-216-864-11 R403 R404 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP A A component identified by this symbol indicates that it has been carefully factory-selected to satisfy regulations regarding X-ray radiation. Should replacement be required, replace only with the value originally used. DESCRIPTION 10K 2.2K 10K 100 2.2K 5% 5% 5% 5% 5% 1/10W 1/10W 1/4W 1/10W 1/10W 1-216-813-11 METAL CHIP 1-216-829-11 METAL CHIP 1-249-425-11 CARBON 1-243-608-71 METAL OXIDE (KV-27FS320 ONLY) 220 4.7K 4.7K 1.5K 5% 5% 5% 5% 1/10W 1/10W 1/4W 3W 1-215-915-21 METAL OXIDE (ALL EXCEPT KV-27FS320) 1-243-683-71 METAL OXIDE 1-249-401-11 CARBON 1-216-833-11 METAL CHIP 470 5% 3W 47 47 10K 5% 5% 5% 1W 1/4W 1/10W 1-260-328-11 1-215-908-00 1-243-535-71 1-216-841-11 1-216-833-11 CARBON METAL OXIDE METAL OXIDE METAL CHIP METAL CHIP 1K 33 220 47K 10K 5% 5% 5% 5% 5% 1/2W 3W 3W 1/10W 1/10W R517 R518 R519 R520 R521 1-249-415-11 CARBON 1-216-833-11 METAL CHIP 1-249-411-11 CARBON 1-243-531-71 METAL OXIDE 1-216-815-11 METAL CHIP (KV-27FS320 ONLY) 680 10K 330 100 330 5% 5% 5% 5% 5% 1/4W 1/10W 1/4W 3W 1/10W 1/10W R521 470 5% 1/10W 5% 5% 5% 1/10W 1/10W 1/10W ! R523 1-216-817-11 METAL CHIP (ALL EXCEPT KV-27FS320) 1-216-837-11 METAL CHIP (KV-27FS320 ONLY) 1-216-834-11 METAL CHIP (ALL EXCEPT KV-27FS320) 22K 5% 1/10W 12K 5% 1/10W 22K 22K 22K 22K 100K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/4W ! R524 ! R525 ! R528 R529 X R530 1-216-833-11 1-218-869-11 1-218-879-11 1-218-879-11 1-218-873-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 10K 8.2K 22K 22K 12K 5% 0.50% 0.50% 0.50% 0.50% 1/10W 1/10W 1/10W 1/10W 1/10W METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 22K 22K 47K 680 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W X R531 180K 0.50% 1/10W 56K 0.50% 1/10W R532 1-218-901-11 METAL CHIP (KV-27FS320 ONLY) 1-218-889-11 METAL CHIP (ALL EXCEPT KV-27FS320) 1-216-810-11 METAL CHIP 120 5% 1/10W METAL CHIP METAL CHIP SHORT CHIP 1K 100 5% 5% 1/10W 1/10W R533 R534 1-215-879-11 1-216-833-11 47K 10K 5% 5% 1W 1/10W KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 R506 R507 R508 R509 ! R510 R512 R513 R514 ! R523 X R531 METAL CHIP METAL CHIP CARBON METAL CHIP METAL CHIP VALUES METAL OXIDE METAL CHIP 90 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. R535 ! R536 ! R537 R538 R541 1-216-825-11 1-260-288-11 1-260-288-11 1-247-887-00 1-216-841-11 METAL CHIP CARBON CARBON CARBON METAL CHIP 2.2K 0.47 0.47 220K 47K 5% 5% 5% 5% 5% 1/10W 1/2W 1/2W 1/4W 1/10W R592 R593 R542 ! R543 R544 ! R545 R546 1-216-833-11 METAL CHIP 1-249-377-11 CARBON 1-216-821-11 METAL CHIP 1-249-387-11 CARBON 1-215-453-00 METAL (KV-27FS320 ONLY) 10K 0.47 1K 3.3 22K 5% 5% 5% 5% 1% 1/10W 1/4W 1/10W 1/4W 1/4W 1-215-447-00 METAL (ALL EXCEPT KV-27FS320) 1-215-445-00 METAL 1-215-453-00 METAL 1-215-429-00 METAL 12K 1% 1/4W 10K 22K 2.2K 1% 1% 1% 1/4W 1/4W 1/4W 1-249-377-11 CARBON 1-215-873-00 METAL OXIDE 1-243-608-71 METAL OXIDE (KV-27FS320 ONLY) 1-215-915-21 METAL OXIDE (ALL EXCEPT KV-27FS320) 0.47 4.7K 1.5K 5% 5% 5% 1/4W 1W 3W 470 5% 3W ! R553 R559 R561 ! R563 R564 1-249-377-11 1-216-805-11 1-215-445-00 1-214-798-21 1-247-895-91 CARBON METAL CHIP METAL METAL CARBON 0.47 47 10K 1.8 470K 5% 5% 1% 1% 5% 1/4W 1/10W 1/4W 1/2W 1/4W R565 R566 ! R567 R568 R569 1-215-889-00 1-218-867-11 1-249-385-11 1-218-867-11 1-218-871-11 METAL OXIDE METAL CHIP CARBON METAL CHIP METAL CHIP 330 6.8K 2.2 6.8K 10K 5% 0.50% 5% 0.50% 0.50% 2W 1/10W 1/4W 1/10W 1/10W R570 R571 R572 R573 ! R574 1-216-833-11 1-216-833-11 1-216-833-11 1-216-837-11 1-214-798-21 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL 10K 10K 10K 22K 1.8 5% 5% 5% 5% 1% 1/10W 1/10W 1/10W 1/10W 1/2W R576 R580 R583 R584 R586 1-243-523-71 1-216-845-11 1-216-829-11 1-249-429-11 1-216-845-11 METAL OXIDE METAL CHIP METAL CHIP CARBON METAL CHIP 22 100K 4.7K 10K 100K 5% 5% 5% 5% 5% 3W 1/10W 1/10W 1/4W 1/10W R589 R590 1-216-829-11 1-216-833-11 METAL CHIP METAL CHIP 4.7K 10K 5% 5% 1/10W 1/10W R546 R547 R548 R549 ! R550 R551 R552 R552 A NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 PART NO. DESCRIPTION VALUES 1-243-803-71 METAL OXIDE 1-249-417-11 CARBON (KV-27FS320 ONLY) 1-249-420-11 CARBON (ALL EXCEPT KV-27FS320) 0.33 1K 5% 5% 1W 1/4W 1.8K 5% 1/4W R594 R595 R596 R597 R598 1-249-429-11 1-247-891-00 1-249-441-11 1-216-864-11 1-218-867-11 10K 330K 100K 5% 5% 5% 1/4W 1/4W 1/4W 6.8K 0.50% 1/10W R599 R603 2.2K 4.7M 5% 5% 1/10W 1/2W R604 R606 1-216-825-11 METAL CHIP 1-219-513-11 METAL (ALL EXCEPT KV-34FS120 L. SOUTH) 1-216-821-11 METAL CHIP 1-216-833-11 METAL CHIP 1K 10K 5% 5% 1/10W 1/10W R607 R608 R609 R610 R611 1-216-833-11 1-216-833-11 1-216-389-11 1-216-833-11 1-216-833-11 METAL CHIP METAL CHIP METAL OXIDE METAL CHIP METAL CHIP 10K 10K 1 10K 10K 5% 5% 5% 5% 5% 1/10W 1/10W 3W 1/10W 1/10W R612 R613 ! R615 R616 R617 1-260-131-11 1-216-833-11 1-202-933-61 1-216-822-11 1-216-821-11 CARBON METAL CHIP FUSIBLE METAL CHIP METAL CHIP 470K 10K 0.1 1.2K 1K 5% 5% 10% 5% 5% 1/2W 1/10W 1/2W 1/10W 1/10W R618 R619 R620 R625 R626 1-216-864-11 1-249-377-11 1-215-857-11 1-216-817-11 1-218-869-11 SHORT CHIP CARBON METAL OXIDE METAL CHIP METAL CHIP 0.47 10 470 8.2K 5% 5% 5% 0.50% 1/4W 1W 1/10W 1/10W R628 R629 R630 R631 R632 1-260-131-11 1-245-478-21 1-245-478-21 1-218-875-11 1-218-823-11 CARBON METAL METAL METAL CHIP METAL CHIP 470K 470K 470K 15K 100 5% 1% 1% 0.50% 0.50% 1/2W 1/4W 1/4W 1/10W 1/10W R640 R641 R647 R648 R650 1-249-417-11 1-216-389-11 1-211-992-11 1-216-864-11 1-216-845-11 CARBON METAL OXIDE METAL CHIP SHORT CHIP METAL CHIP 1K 1 91 5% 1/4W 5% 3W 0.50% 1/10W 100K 5% 1/10W R651 R658 R659 R660 1-216-845-11 1-249-393-11 1-249-393-11 1-216-833-11 METAL CHIP CARBON CARBON METAL CHIP 100K 10 10 10K 5% 5% 5% 5% 1/10W 1/4W 1/4W 1/10W R593 CARBON CARBON CARBON SHORT CHIP METAL CHIP 91 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION A C NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. VALUES REF. NO. R661 R667 R668 R670 R671 1-249-415-11 1-216-833-11 1-249-413-11 1-216-833-11 1-243-979-71 CARBON METAL CHIP CARBON METAL CHIP METAL OXIDE 680 10K 470 10K 0.1 5% 5% 5% 5% 5% 1/4W 1/10W 1/4W 1/10W 2W R672 ! R674 R681 R686 R687 1-243-979-71 1-220-926-11 1-216-825-11 1-240-303-31 1-220-797-11 METAL OXIDE FUSIBLE METAL CHIP CEMENTED CEMENTED 0.1 0.47 2.2K 0.22 0.47 5% 10% 5% 5% 5% 2W 1/2W 1/10W 10W 10W R688 R691 R692 R694 R699 1-240-303-31 CEMENTED 1-216-837-11 METAL CHIP 1-216-837-11 METAL CHIP 1-216-837-11 METAL CHIP 1-247-289-00 METAL OXIDE (KV-34FS120 L. SOUTH ONLY) 0.22 22K 22K 22K 8.2M 5% 5% 5% 5% 5% 10W 1/10W 1/10W 1/10W 1W R932 R934 R953 R1510 R1511 1-218-285-11 1-218-285-11 1-218-285-11 1-216-833-11 1-216-833-11 75 75 75 10K 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W ! T604 ! T605 PART NO. 1-437-606-12 1-443-402-11 DESCRIPTION VALUES COVERTER TRANSFORMER TRANSFORMER, LINE FILTER THERMISTOR TH501 THP501 THP501 1-800-193-00 THERMISTOR 1-803-970-11 THERMISTOR, POSITIVE (ALL EXCEPT KV-34FS120 L. SOUTH) 1-803-540-11 THERMISTOR, POSITIVE (KV-34FS120 L. SOUTH ONLY) TUNER ! TU001 ! VDR600 C RELAY RY501 ! RY600 1-755-198-11 1-755-395-11 RELAY, AC POWER RELAY (AC POWER) TUNER, FSS BTF-WA421 VARISTOR ! VDR600 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 8-598-593-50 ! 1-810-974-21 VARISTOR (ALL EXCEPT KV-34FS120 L. SOUTH) 1-804-995-11 VARISTOR (KV-34FS120 L. SOUTH ONLY) * A-1057-459-A C (VAR) BOARD, MOUNTED (KV-27FS320 ONLY) * A-1415-717-A C (VAR) BOARD, MOUNTED (ALL EXCEPT KV-27FS320) 1-900-803-22 4-382-854-11 WIRE ASSY, G2 LEAD SCREW (M3X10), P, SW (+) SWITCH S501 S502 1-572-707-11 1-572-707-11 SWITCH, LEVER SWITCH, LEVER TRANSFORMER T501 ! T502 ! T503 ! T503 ! T505 ! T505 ! T603 ! T603 1-433-836-11 TRANSFORMER, HORIZONTAL DRIVE 1-435-869-11 TRANFORMER, FERRITE (PMT) 1-453-310-11 FBT ASSY NX-4521//X4J4 (KV-27FS320 ONLY) 1-453-338-41 FBT ASSY NX-4600/X4J4 (ALL EXCEPT KV-27FS320) 1-433-850-11 TRANSFORMER, HORIZONTAL LINEAR (KV-27FS320 ONLY) 1-435-098-21 TRANSFORMER, HORIZONTAL LINEAR (ALL EXCEPT KV-27FS320) 1-437-783-11 TRANSFORMER, STANDBY (ALL EXCEPT KV-34FS120 L. SOUTH) CAPACITOR C701 C702 C703 C704 C705 1-126-947-11 1-136-497-81 1-126-947-11 1-107-652-11 1-107-652-11 ELECT FILM ELECT ELECT ELECT 47µF 0.1µF 47µF 10µF 10µF 20% 5% 20% 20% 20% 35V 50V 35V 250V 250V C706 C708 C709 C710 C711 1-137-528-11 1-126-235-11 1-126-964-11 1-126-964-11 1-102-074-00 MYLAR ELECT ELECT ELECT CERAMIC 0.1µF 100µF 10µF 10µF 0.001µF 10% 20% 20% 20% 10% 250V 16V 50V 50V 50V C713 C714 C715 C716 C719 1-126-964-11 1-126-947-11 1-162-114-00 1-162-114-00 1-126-947-11 ELECT ELECT CERAMIC CERAMIC ELECT 10µF 20% 47µF 20% 0.0047µF 0.0047µF 47µF 20% 50V 35V 2KV 2KV 35V 1-439-854-11 TRANSFORMER, STANDBY (KV-34FS120 L. SOUTH ONLY) KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 92 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. CONNECTOR * * CN701 CN702 CN703 CN704 CN705 1-564-506-11 PLUG, CONNECTOR 3P 1-695-915-11 TAB (CONTACT) 1-695-915-11 TAB (CONTACT) 1-785-879-11 CONNECTOR, ONE TOUCH 1-564-511-11 PLUG, CONNECTOR 8P (KV-27FS320 ONLY) * CN705 * CN706 1-564-512-11 PLUG, CONNECTOR (ALL EXCEPT KV-27FS320) 1-564-510-11 PLUG, CONNECTOR 8P 7P DIODE D701 D702 D703 D704 D705 8-719-901-83 8-719-901-83 8-719-901-83 8-719-074-25 8-719-108-12 DIODE DIODE DIODE DIODE DIODE 1SS83 1SS83 1SS83 PG104R RD9.1EW IC IC701 IC702 IC703 6-705-638-01 8-759-562-43 8-759-701-59 IC IC IC BD7941AT-V5 TDA6108JF/N1B NJM78M09FA JACK ! J701 1-451-470-21 1-410-482-31 INDUCTOR 8-729-422-27 8-729-422-27 8-729-422-27 1-247-807-31 1-260-328-11 1-260-328-11 1-260-328-11 1-260-087-11 R715 R716 R717 DESCRIPTION CARBON CARBON CARBON CARBON CARBON VALUES 100 1K 1K 1K 100 5% 5% 5% 5% 5% 1/4W 1/2W 1/2W 1/2W 1/2W 560K 100 3.3 5% 5% 5% 1/2W 1/2W 2W R718 R719 1-260-132-11 CARBON 1-260-087-11 CARBON 1-216-375-00 METAL OXIDE (KV-27FS320 ONLY) 1-216-373-11 METAL OXIDE 1-215-888-00 METAL OXIDE 2.2 220 5% 5% 2W 2W R720 R721 R722 R723 R724 1-216-825-11 1-216-825-11 1-247-807-31 1-247-807-31 1-247-807-31 METAL CHIP METAL CHIP CARBON CARBON CARBON 2.2K 2.2K 100 100 100 5% 5% 5% 5% 5% 1/10W 1/10W 1/4W 1/4W 1/4W R725 R726 R727 R731 R732 1-216-825-11 1-216-829-11 1-216-825-11 1-216-864-11 1-216-833-11 METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP 2.2K 4.7K 2.2K 5% 5% 5% 1/10W 1/10W 1/10W 10K 5% 1/10W R733 R734 1-216-833-11 1-216-809-11 METAL CHIP METAL CHIP 10K 100 5% 5% 1/10W 1/10W 5% 5% 10% 20% 5% 50V 50V 50V 16V 50V VARIABLE RESISTOR ! RV701 RV702 100µH M TRANSISTOR Q700 Q701 Q703 PART NO. R710 R711 R712 R713 R714 SOCKET, CRT COIL L701 C M NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SD601A-Q 2SD601A-Q RESISTOR R700 R701 R702 R703 R704 1-249-433-11 1-216-833-11 1-216-811-11 1-216-809-11 1-249-419-11 CARBON METAL CHIP METAL CHIP METAL CHIP CARBON 22K 10K 150 100 1.5K 5% 5% 5% 5% 5% 1/4W 1/10W 1/10W 1/10W 1/4W R705 R706 R707 R708 R709 1-249-429-11 1-249-381-11 1-249-383-11 1-247-807-31 1-247-807-31 CARBON CARBON CARBON CARBON CARBON 10K 1 1.5 100 100 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W 1-241-656-11 1-238-019-11 RES, ADJ, METAL FILM 110M RES, ADJ, METAL FILM 47K * A-1056-113-A M (VAR) BOARD, MOUNTED (KV-32FS320 ONLY) * A-1057-456-A M (VAR) BOARD, MOUNTED (KV-27FS320 ONLY) * A-1060-077-A M (VAR) BOARD, MOUNTED (KV-36FS120, 38FS120 L. NORTH ONLY) * A-1061-529-A M (VAR) BOARD, MOUNTED (KV-36FS320 ONLY) * A-1415-721-A M (VAR) BOARD, MOUNTED (KV-32FS120, 34FS120 ONLY) CAPACITOR KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 C003 C004 C005 C006 C007 1-162-919-11 1-162-923-11 1-162-966-11 1-126-767-11 1-164-315-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP 22pF 47pF 0.0022µF 1000µF 470pF 93 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. C008 C009 C010 C011 C012 1-107-826-11 1-164-230-11 1-127-573-11 1-162-964-11 1-162-968-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1µF 220pF 1µF 0.001µF 0.0047µF 10% 5% 10% 10% 10% 16V 50V 16V 50V 50V C014 C015 C019 C021 C022 1-127-573-11 1-107-826-11 1-107-826-11 1-107-826-11 1-126-964-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT 1µF 0.1µF 0.1µF 0.1µF 10µF 10% 10% 10% 10% 20% 16V 16V 16V 16V 50V C023 C033 C041 C047 C048 1-126-935-11 1-162-970-11 1-126-964-11 1-164-315-11 1-104-665-11 ELECT CERAMIC CHIP ELECT CERAMIC CHIP ELECT 470µF 0.01µF 10µF 470pF 100µF 20% 10% 20% 5% 20% 16V 25V 50V 50V 25V C064 C090 C091 C092 C094 1-165-176-11 1-162-970-11 1-126-947-11 1-126-947-11 1-162-970-11 CERAMIC CHIP CERAMIC CHIP ELECT ELECT CERAMIC CHIP 0.047µF 0.01µF 47µF 47µF 0.01µF 10% 10% 20% 20% 10% 16V 25V 35V 35V 25V C095 C096 C097 C098 C099 1-126-947-11 1-162-970-11 1-126-947-11 1-162-970-11 1-126-947-11 ELECT CERAMIC CHIP ELECT CERAMIC CHIP ELECT 47µF 0.01µF 47µF 0.01µF 47µF 20% 10% 20% 10% 20% 35V 25V 35V 25V 35V C100 C101 C102 C103 C115 1-107-826-11 1-126-940-11 1-115-416-11 1-126-947-11 1-164-739-11 CERAMIC CHIP ELECT CERAMIC CHIP ELECT CERAMIC CHIP 0.1µF 330µF 0.001µF 47µF 560pF 10% 20% 5% 20% 5% 16V 25V 25V 35V 50V C116 C304 C305 C306 C313 1-107-826-11 1-107-826-11 1-107-826-11 1-107-826-11 1-107-826-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1µF 0.1µF 0.1µF 0.1µF 0.1µF 10% 10% 10% 10% 10% 16V 16V 16V 16V 16V C316 1-107-826-11 CERAMIC CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 1-107-826-11 CERAMIC CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 1-107-826-11 CERAMIC CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 0.1µF 10% 16V 0.1µF 10% 16V 0.1µF 10% 16V 1-107-826-11 CERAMIC CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 0.1µF C319 C320 C320 C321 C318 C319 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 DESCRIPTION VALUES 1-216-864-11 SHORT CHIP (KV-32FS120, 34FS120, 36FS120, 38FS120 L. NORTH ONLY) 1-107-826-11 CERAMIC CHIP 0.1µF 10% 16V (KV-27FS320, 32FS320, 36FS320 ONLY) 1-216-864-11 SHORT CHIP (KV-32FS120, 34FS120, 36FS120, 38FS120 L. NORTH ONLY) 20% 35V C322 C325 C326 0.1µF 10% 0.0033µF 10% 2.2µF 16V 50V 16V C330 C337 C351 C370 C390 1-107-826-11 1-162-919-11 1-164-315-11 1-162-970-11 1-162-970-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1µF 22pF 470pF 0.01µF 0.01µF 10% 5% 5% 10% 10% 16V 50V 50V 25V 25V C511 C542 C551 C552 C559 1-126-964-11 1-162-966-11 1-127-573-11 1-124-779-00 1-216-864-11 ELECT CERAMIC CHIP CERAMIC CHIP ELECT CHIP SHORT CHIP 10µF 0.0022µF 1µF 10µF 20% 10% 10% 20% 50V 50V 16V 16V C665 C666 C780 C781 C782 1-104-665-11 1-104-665-11 1-162-926-11 1-162-926-11 1-162-926-11 ELECT ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 100µF 100µF 82pF 82pF 82pF 20% 20% 5% 5% 5% 25V 25V 50V 50V 50V C3049 C3051 C3052 C3053 C3054 1-127-573-11 1-126-964-11 1-164-230-11 1-165-176-11 1-127-573-11 CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 1µF 10µF 220pF 0.047µF 1µF 10% 20% 5% 10% 10% 16V 50V 50V 16V 16V C3057 C3307 C3314 1-107-826-11 CERAMIC CHIP 1-107-826-11 CERAMIC CHIP 1-107-826-11 CERAMIC CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 1-126-947-11 ELECT (KV-27FS320, 32FS320, 36FS320 ONLY) 0.1µF 0.1µF 0.1µF 10% 10% 10% 16V 16V 16V 47µF 20% 35V 1-124-779-00 ELECT CHIP 1-165-176-11 CERAMIC CHIP (ALL EXCEPT KV-27FS320) 1-216-864-11 SHORT CHIP (KV-27FS320 ONLY) 10µF 20% 0.047µF 10% 16V 16V 1-126-933-11 1-162-966-11 100µF 20% 0.0022µF 10% 16V 50V C3509 C3519 C3519 10% PART NO. 1-126-947-11 ELECT (KV-27FS320, 32FS320, 36FS320 ONLY) 1-107-826-11 CERAMIC CHIP 1-162-967-11 CERAMIC CHIP 1-164-505-11 CERAMIC CHIP C3315 C317 M NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. 47µF 16V C3520 C3534 ELECT CERAMIC CHIP 94 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 M REF. NO. C3536 PART NO. DESCRIPTION VALUES REF. NO. DIODE DIODE DIODE DIODE DIODE 16V 25V 1/10W D250 D304 D351 D390 D512 1-803-974-21 1-803-974-21 6-500-697-01 8-719-404-50 8-719-404-50 VARISTOR, CHIP VARISTOR, CHIP DIODE DIODE DIODE 20% 20% 20% 20% 20% 16V 16V 16V 25V 16V D513 D558 D559 D762 D763 8-719-404-50 8-719-404-50 8-719-404-50 8-719-404-50 8-719-404-50 DIODE DIODE DIODE DIODE DIODE 0.1µF 10µF 10% 20% 16V 50V 10µF 20% 50V D772 D773 D782 D783 D3305 8-719-404-50 DIODE MA111-TX 8-719-404-50 DIODE MA111-TX 8-719-404-50 DIODE MA111-TX 8-719-404-50 DIODE MA111-TX 1-803-974-21 VARISTOR, CHIP (1608) (KV-27FS320, 32FS320, 36FS320 ONLY) 1-126-964-11 ELECT (KV-27FS320, 32FS320, 36FS320 ONLY) 1-126-964-11 ELECT (KV-27FS320, 32FS320, 36FS320 ONLY) 1-126-964-11 ELECT (KV-27FS320, 32FS320, 36FS320 ONLY) 10µF 20% 50V D3306 10µF 20% 50V 10µF 20% 50V 1-126-964-11 ELECT (KV-27FS320, 32FS320, 36FS320 ONLY) 1-124-778-00 ELECT CHIP 1-127-573-11 CERAMIC CHIP 10µF 20% 50V 1-803-974-21 VARISTOR, CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 1-803-974-21 VARISTOR, CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 1-803-974-21 VARISTOR, CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 1-803-974-21 VARISTOR, CHIP 22µF 1µF 20% 10% 6.3V 16V 25V 0.0047µF 10% 50V 0.01µF 25V 820pF C3553 C3554 C3560 1-115-414-11 CERAMIC CHIP (ALL EXCEPT KV-27FS320) 1-107-826-11 CERAMIC CHIP 1-162-970-11 CERAMIC CHIP 1-216-833-11 METAL CHIP 0.1µF 0.01µF 10K 10% 10% 5% C3611 C3612 C3613 C3638 C3901 1-126-933-11 1-126-933-11 1-126-933-11 1-104-665-11 1-126-933-11 100µF 100µF 100µF 100µF 100µF C3902 C3984 1-107-826-11 CERAMIC CHIP 1-126-964-11 ELECT (KV-27FS320, 32FS320, 36FS320 ONLY) 1-126-964-11 ELECT (KV-27FS320, 32FS320, 36FS320 ONLY) C3542 C3988 C3989 C3990 C3991 C3994 C3995 C6003 ELECT ELECT ELECT ELECT ELECT 10% 25V D3307 D3308 CN001 * CN002 * CN302 1-560-124-00 PLUG, CONNECTOR (2.5MM) 4P (KV-27FS320, 32FS320, 32FS120, 34FS120 ONLY) 1-764-812-12 PLUG, CONNECTOR 11P (KV-36FS120, 38FS120 L. NORTH, 36FS320 ONLY) 1-564-515-11 PLUG, CONNECTOR 12P (KV-27FS320, 32FS320, 36FS320 ONLY) DIODE D002 D004 D005 D006 D044 8-719-069-55 8-719-977-28 8-719-977-28 8-719-069-55 8-719-977-28 D3509 DIODE DIODE DIODE DIODE DIODE UDZSTE-175.6B DTZ10B DTZ10B UDZSTE-175.6B DTZ10B KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 DTZ10B D1NS4 10ERB20-TB5 UDZSTE-175.6B MA111-TX (1608) (1608) UDZSTE-173.3B MA111-TX MA111-TX MA111-TX MA111-TX MA111-TX MA111-TX MA111-TX (1608) (1608) (1608) (1608) FERRITE BEAD FB302 CONNECTOR * VALUES 8-719-977-28 8-719-510-02 6-500-567-21 8-719-069-55 8-719-404-50 0.001µF 5% C3539 DESCRIPTION D045 D050 D051 D052 D110 1-115-416-11 CERAMIC CHIP (ALL EXCEPT KV-27FS320) 1-162-968-11 CERAMIC CHIP (KV-27FS320 ONLY) 1-162-970-11 CERAMIC CHIP C3536 PART NO. 1-469-549-21 INDUCTOR 1µH FERRITE 0µH FILTER FL001 1-234-126-21 IC IC001 IC002 IC003 IC004 IC301 6-804-652-01 IC 6-704-607-01 IC 8-759-352-91 IC 8-759-533-85 IC 6-701-105-01 IC (KV-27FS320, 32FS320, 36FS320 ONLY) M65585µF-104FP M24C16-WMN6T(B) PST9143NL L88M05T-FA-TL NJM2750M-TE2 95 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 M REF. NO. IC565 IC633 IC3001 PART NO. DESCRIPTION 8-759-700-44 IC 8-759-641-26 IC 8-759-443-11 IC (KV-27FS320, 32FS320, 36FS320 ONLY) VALUES REF. NO. NJM2902M NJM2391DL1-33(TE1) NJM2283M-TE1 PART NO. DESCRIPTION VALUES Q519 Q533 Q761 Q762 Q763 8-729-422-27 8-729-424-02 8-729-422-27 8-729-422-27 8-729-422-27 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SB709A-QRS-TX 2SD601A-Q 2SD601A-Q 2SD601A-Q Q771 Q772 Q773 Q781 Q782 8-729-422-27 8-729-422-27 8-729-422-27 8-729-422-27 8-729-422-27 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SD601A-Q 2SD601A-Q 2SD601A-Q 2SD601A-Q Q783 Q860 Q3005 Q3300 Q3304 8-729-422-27 8-729-422-27 8-729-424-02 8-729-422-27 8-729-424-02 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SD601A-Q 2SB709A-QRS-TX 2SD601A-Q 2SB709A-QRS-TX Q3502 Q6000 8-729-422-27 8-729-422-27 TRANSISTOR TRANSISTOR 2SD601A-Q 2SD601A-Q SHORT CHIP METAL CHIP METAL CHIP FERRITE METAL CHIP 1K 470 0µH 4.7K CHIP CONDUCTOR JR44 JR317 JR318 JR546 JR3503 1-216-864-11 1-216-809-11 1-216-864-11 1-216-864-11 1-216-864-11 SHORT CHIP METAL CHIP SHORT CHIP SHORT CHIP SHORT CHIP 100 5% COIL L002 L005 L006 L007 L011 1-234-126-21 1-234-126-21 1-414-273-11 1-414-267-21 1-234-126-21 FERRITE FERRITE INDUCTOR INDUCTOR FERRITE L301 10µH L611 L612 L613 L710 1-469-555-21 INDUCTOR (KV-27FS320, 32FS320, 36FS320 ONLY) 1-469-561-21 INDUCTOR 1-469-561-21 INDUCTOR 1-469-561-21 INDUCTOR 1-410-387-11 INDUCTOR L711 L712 L3003 L3004 L3609 1-410-387-11 1-410-387-11 1-234-126-21 1-234-126-21 1-414-267-21 33µH 33µH 0µH 0µH 10µH INDUCTOR INDUCTOR FERRITE FERRITE INDUCTOR 0µH 0µH 100µH 10µH 0µH 1/10W RESISTOR 100µH 100µH 100µH 33µH TRANSISTOR Q002 Q004 Q008 Q301 Q303 8-729-422-27 8-729-422-27 8-729-422-27 8-729-424-02 8-729-424-02 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SD601A-Q 2SD601A-Q 2SB709A-QRS-TX 2SB709A-QRS-TX Q305 Q306 Q307 Q316 Q390 8-729-424-02 8-729-422-27 8-729-424-02 8-729-422-27 8-729-422-27 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SB709A-QRS-TX 2SD601A-Q 2SB709A-QRS-TX 2SD601A-Q 2SD601A-Q Q391 Q503 Q504 Q505 Q515 8-729-422-27 8-729-422-27 8-729-422-27 8-729-422-27 8-729-422-27 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SD601A-Q 2SD601A-Q 2SD601A-Q 2SD601A-Q KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 R002 R003 R004 R005 R006 1-216-864-11 1-216-821-11 1-216-817-11 1-400-427-21 1-216-829-11 R007 R008 R009 R010 R015 1-400-427-21 FERRITE 1-216-864-11 SHORT CHIP 1-216-864-11 SHORT CHIP 1-216-813-11 METAL CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 1-216-833-11 METAL CHIP R027 R028 R030 R031 R032 1-218-887-11 1-216-813-11 1-216-813-11 1-216-813-11 1-216-813-11 R034 R035 R037 R038 R039 R040 R041 R042 R043 5% 5% 1/10W 1/10W 5% 1/10W 220 5% 1/10W 10K 5% 1/10W METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 47K 220 220 220 220 0.50% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W 1-216-864-11 1-216-809-11 1-216-833-11 1-216-813-11 1-216-813-11 SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100 10K 220 220 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1-216-829-11 1-216-829-11 1-216-813-11 1-216-813-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP 4.7K 4.7K 220 220 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 0µH 96 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 M REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R044 R045 R047 R048 R049 1-216-829-11 1-216-829-11 1-216-813-11 1-216-829-11 1-216-829-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 4.7K 4.7K 220 4.7K 4.7K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R310 R311 R312 R313 R314 1-216-821-11 1-216-813-11 1-218-867-11 1-216-864-11 1-216-833-11 METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP 1K 220 6.8K 5% 1/10W 5% 1/10W 0.50% 1/10W 10K 5% 1/10W R050 R053 R054 R059 R060 1-216-829-11 1-216-837-11 1-216-837-11 1-216-821-11 1-216-813-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 4.7K 22K 22K 1K 220 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R318 R319 R320 R321 R322 1-216-825-11 1-216-813-11 1-216-825-11 1-216-864-11 1-216-864-11 METAL CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP 2.2K 220 2.2K 5% 5% 5% 1/10W 1/10W 1/10W R061 R062 R063 R070 R071 1-216-833-11 METAL CHIP 1-216-817-11 METAL CHIP 1-216-829-11 METAL CHIP 1-216-813-11 METAL CHIP 1-216-809-11 METAL CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 10K 470 4.7K 220 100 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R324 R325 R326 R329 1-216-821-11 METAL CHIP 1-216-864-11 SHORT CHIP 1-400-427-21 FERRITE 1-216-813-11 METAL CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 1K 5% 1/10W 0µH 220 5% 1/10W R076 R080 R081 R082 R083 1-216-809-11 1-216-833-11 1-216-841-11 1-216-857-11 1-216-847-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100 10K 47K 1M 150K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R331 R332 R333 1-216-864-11 SHORT CHIP 1-216-864-11 SHORT CHIP 1-216-813-11 METAL CHIP 220 5% 1/10W (KV-27FS320, 32FS320, 36FS320 ONLY) 1-216-864-11 SHORT CHIP (KV-32FS120, 34FS120, 36FS120, 38FS120 L. NORTH ONLY) R084 R090 R091 R092 R093 1-216-819-11 1-216-837-11 1-216-841-11 1-216-825-11 1-216-841-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 680 22K 47K 2.2K 47K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R094 R095 R096 R097 R100 1-216-864-11 1-216-864-11 1-216-813-11 1-216-813-11 1-216-849-11 SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP 220 220 220K 5% 5% 5% 1/10W 1/10W 1/10W R101 R110 R112 R115 R116 1-216-829-11 1-216-813-11 1-216-829-11 1-216-817-11 1-216-853-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 4.7K 220 4.7K 470 470K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R131 R201 R203 R211 1-216-813-11 METAL CHIP 1-216-813-11 METAL CHIP 1-216-813-11 METAL CHIP 1-216-864-11 SHORT CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 220 220 220 5% 5% 5% 1/10W 1/10W 1/10W R212 R213 R309 1-216-864-11 1-216-829-11 1-216-833-11 4.7K 10K 5% 5% 1/10W 1/10W SHORT CHIP METAL CHIP METAL CHIP KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 R336 R337 R338 1-216-801-11 METAL CHIP 1-216-845-11 METAL CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 1-216-845-11 METAL CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 22 100K 5% 5% 1/10W 1/10W 100K 5% 1/10W R341 R342 R343 R344 R345 1-218-845-11 1-218-847-11 1-216-827-11 1-216-821-11 1-216-864-11 820 1K 3.3K 1K 0.50% 0.50% 5% 5% 1/10W 1/10W 1/10W 1/10W R346 1-216-864-11 SHORT CHIP (KV-32FS120, 34FS120, 36FS120, 38FS120 L. NORTH ONLY) 1-216-813-11 METAL CHIP 220 5% 1/10W (KV-27FS320, 32FS320, 36FS320 ONLY) 1-216-864-11 SHORT CHIP (KV-32FS120, 34FS120, 36FS120, 38FS120 L. NORTH ONLY) R339 R347 R347 METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP R351 R352 R353 R354 R355 1-216-829-11 1-216-853-11 1-216-864-11 1-216-864-11 1-216-864-11 METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP SHORT CHIP 4.7K 470K 5% 5% 1/10W 1/10W R370 R371 1-216-825-11 1-216-849-11 METAL CHIP METAL CHIP 2.2K 220K 5% 5% 1/10W 1/10W 97 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 M REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES 1/10W 1/10W R861 R862 R900 R3057 R3058 1-216-833-11 1-216-813-11 1-216-851-11 1-216-821-11 1-216-833-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 5% 5% 0.50% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R3085 R3086 R3087 R3115 R3303 1-216-864-11 1-216-821-11 1-216-809-11 1-216-864-11 1-216-863-11 SHORT CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP 10 5% 3W 4.7K 1K 15K 5% 1/10W 0.50% 1/10W 5% 1/10W R3305 R3308 R3315 R3316 R3317 1-216-809-11 1-216-809-11 1-216-813-11 1-216-825-11 1-216-813-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 270 2.2K 3.3K 5.6K 1K 0.50% 0.50% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R3328 R3334 1-216-864-11 SHORT CHIP 1-216-813-11 METAL CHIP 220 5% 1/10W (KV-27FS320, 32FS320, 36FS320 ONLY) 1-216-864-11 SHORT CHIP (KV-32FS120, 34FS120, 36FS120, 38FS120 L. NORTH ONLY) 1-216-821-11 1-216-829-11 1-216-821-11 1-218-847-11 1-216-835-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 1K 4.7K 1K 1K 15K 5% 5% 5% 0.50% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R3335 R774 R775 R776 R777 R778 1-218-833-11 1-218-855-11 1-216-827-11 1-216-830-11 1-216-821-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 270 2.2K 3.3K 5.6K 1K 0.50% 0.50% 5% 5% 5% R779 R780 R782 R783 R784 1-216-821-11 1-216-829-11 1-218-847-11 1-216-835-11 1-218-833-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 1K 4.7K 1K 15K 270 R785 R786 R787 R788 R789 1-218-855-11 1-216-827-11 1-216-830-11 1-216-821-11 1-216-864-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP 2.2K 3.3K 5.6K 1K R794 R851 R852 R860 1-216-864-11 1-216-821-11 1-218-887-11 1-216-833-11 SHORT CHIP METAL CHIP METAL CHIP METAL CHIP R372 R382 R511 R513 R515 1-216-827-11 1-216-863-11 1-216-864-11 1-216-845-11 1-216-845-11 METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP 3.3K 3.3M 5% 5% 1/10W 1/10W 100K 100K 5% 5% R526 R540 R547 R556 R557 1-216-837-11 1-216-833-11 1-218-891-11 1-216-825-11 1-216-825-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 22K 10K 68K 2.2K 2.2K R634 R759 R760 R762 R763 1-215-905-11 1-216-864-11 1-216-829-11 1-218-847-11 1-216-835-11 METAL OXIDE SHORT CHIP METAL CHIP METAL CHIP METAL CHIP R764 R765 R766 R767 R768 1-218-833-11 1-218-855-11 1-216-827-11 1-216-830-11 1-216-821-11 R769 R770 R771 R772 R773 1K 47K 10K R3334 10K 220 330K 1K 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W 1K 100 5% 5% 1/10W 1/10W 3.3M 5% 1/10W 100 100 220 2.2K 220 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W 220 5% 1/10W R3390 R3391 R3392 1-216-813-11 METAL CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 1-216-864-11 SHORT CHIP 1-216-829-11 METAL CHIP 1-216-818-11 METAL CHIP 4.7K 560 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W R3393 R3394 R3395 R3396 R3517 1-216-825-11 1-216-833-11 1-216-864-11 1-216-864-11 1-218-881-11 METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP METAL CHIP 2.2K 10K 5% 5% 1/10W 1/10W 27K 0.50% 1/10W 5% 5% 0.50% 5% 0.50% 1/10W 1/10W 1/10W 1/10W 1/10W R3518 R3519 R3524 R3525 R3527 1-216-833-11 1-216-833-11 1-218-867-11 1-216-821-11 1-216-825-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 10K 10K 6.8K 1K 2.2K 5% 5% 0.50% 5% 5% 0.50% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W R3528 R3529 R3530 R3532 R3533 1-216-833-11 1-216-833-11 1-218-865-11 1-216-864-11 1-218-869-11 METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP 10K 10K 5.6K 5% 1/10W 5% 1/10W 0.50% 1/10W 8.2K 0.50% 1/10W R3534 R3535 R3536 R3537 1-218-720-11 1-218-865-11 1-218-869-11 1-216-855-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP 15K 5.6K 8.2K 680K 0.50% 0.50% 0.50% 5% 5% 1/10W 0.50% 1/10W 5% 1/10W KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 98 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 M V REF. NO. PART NO. DESCRIPTION VALUES REF. NO. 1-216-864-11 1-216-830-11 1-216-833-11 1-216-815-11 1-216-817-11 SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 5.6K 10K 330 470 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W R3551 R3553 R3554 R3555 R3559 1-216-829-11 1-216-813-11 1-216-827-11 1-216-833-11 1-216-837-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 4.7K 220 3.3K 10K 22K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R3580 R3599 R3900 1-216-837-11 METAL CHIP 22K 5% 1-216-837-11 METAL CHIP 22K 5% 1-216-809-11 METAL CHIP 100 5% (KV-32FS120, 34FS120, 36FS120, 38FS120 L. NORTH ONLY) 1-216-809-11 METAL CHIP 100 5% (KV-32FS120, 34FS120, 36FS120, 38FS120 L. NORTH ONLY) R3902 R3903 R3904 R3905 1/10W 1-216-809-11 METAL CHIP 100 5% 1/10W (KV-32FS120, 34FS120, 36FS120, 38FS120 L. NORTH ONLY) 1-218-285-11 METAL CHIP 75 5% 1/10W (KV-27FS320, 32FS320, 36FS320 ONLY) 1-216-813-11 METAL CHIP 220 5% 1/10W (KV-27FS320, 32FS320, 36FS320 ONLY) 220 5% 1/10W 75 5% 1/10W 220 5% 1/10W 1-218-285-11 METAL CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 1-216-822-11 METAL CHIP 1-216-809-11 METAL CHIP 1-216-809-11 METAL CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 75 5% 1/10W 1.2K 100 100 5% 5% 5% 1/10W 1/10W 1/10W 100 5% 1/10W 100 5% 1/10W R6001 1-216-809-11 METAL CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 1-216-809-11 METAL CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 1-216-833-11 METAL CHIP 10K 5% 1/10W R6002 R6003 R6004 1-216-833-11 1-216-833-11 1-216-821-11 10K 10K 1K 5% 5% 5% 1/10W 1/10W 1/10W R3907 R3908 R3910 R3990 R3997 R3998 R3999 METAL CHIP METAL CHIP METAL CHIP KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 X001 X301 VALUES 1-795-006-21 1-781-377-21 VIBRATOR, CRYSTAL VIBRATOR, CRYSTAL V * A-1057-460-A V (VAR) BOARD, MOUNTED (KV-27FS320 ONLY) * A-1415-719-A V (VAR) BOARD, MOUNTED (ALL EXCEPT KV-27FS320) 1/10W 1/10W 1/10W 1-216-813-11 METAL CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 1-218-285-11 METAL CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) 1-216-813-11 METAL CHIP (KV-27FS320, 32FS320, 36FS320 ONLY) R3906 DESCRIPTION CRYSTAL R3539 R3541 R3542 R3543 R3550 R3901 PART NO. 4-382-854-11 SCREW (M3X10), P, SW (+) CAPACITOR C802 C803 C804 C805 C808 1-126-964-11 1-137-378-11 1-137-378-11 1-131-985-21 1-162-970-11 ELECT MYLAR MYLAR FILM CERAMIC CHIP 10µF 0.22µF 0.22µF 0.033µF 0.01µF 20% 5% 5% 5% 10% 50V 50V 50V 250V 25V C809 C810 C811 C812 C813 1-128-934-91 1-130-495-00 1-129-725-00 1-162-970-11 1-126-933-11 CERAMIC CHIP MYLAR FILM CERAMIC CHIP ELECT 0.33µF 0.1µF 0.082µF 0.01µF 100µF 20% 5% 5% 10% 20% 10V 50V 400V 25V 16V C821 C823 C824 C826 C862 1-162-970-11 1-130-967-00 1-165-176-11 1-162-927-11 1-126-964-11 CERAMIC CHIP FILM CERAMIC CHIP CERAMIC CHIP ELECT 0.01µF 0.0027µF 0.047µF 100pF 10µF 10% 5% 10% 5% 20% 25V 50V 16V 50V 50V C901 C902 C903 C904 C905 1-107-667-11 1-107-364-11 1-126-935-11 1-130-471-00 1-107-364-11 ELECT MYLAR ELECT MYLAR MYLAR 2.2µF 0.01µF 470µF 0.001µF 0.01µF 20% 10% 20% 5% 10% 400V 200V 16V 50V 200V C906 C907 C908 C909 C910 1-130-471-00 1-107-963-11 1-126-935-11 1-104-999-11 1-104-999-11 MYLAR ELECT ELECT MYLAR MYLAR 0.001µF 33µF 470µF 0.1µF 0.1µF 5% 20% 20% 5% 5% 50V 250V 16V 200V 200V C911 C912 C913 C914 C930 1-126-933-11 1-126-933-11 1-102-074-00 1-130-491-00 1-104-655-91 ELECT ELECT CERAMIC MYLAR ELECT 100µF 100µF 0.001µF 0.047µF 470µF 20% 20% 10% 5% 20% 16V 16V 50V 50V 6.3V 99 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 V REF. NO. C931 C1815 C1816 C1817 C1817 C1818 C1818 C1819 C1820 C2801 PART NO. DESCRIPTION VALUES REF. NO. 1-104-655-91 ELECT 1-129-718-00 FILM 1-102-244-00 CERAMIC 1-129-709-91 FILM (KV-27FS320 ONLY) 470µF 0.022µF 220pF 0.0039µF 20% 5% 10% 5% 1-129-928-00 FILM (ALL EXCEPT KV-27FS320) 1-102-002-00 CERAMIC (KV-27FS320 ONLY) 1-164-645-11 CERAMIC (ALL EXCEPT KV-27FS320) 0.0027µF 5% 630V 680pF 10% 500V 1000pF 10% 500V 1-102-244-00 CERAMIC (ALL EXCEPT KV-27FS320) 1-109-954-11 ELECT 1-128-578-11 ELECT 220pF 10% 500V 0.47µF 1µF 20% 20% 160V 100V CN901 CN902 CN1802 1-564-512-11 1-770-723-11 1-785-879-11 DESCRIPTION VALUES CHIP CONDUCTOR JR802 JR803 1-216-864-11 1-216-864-11 SHORT CHIP SHORT CHIP COIL CONNECTOR * * 6.3V 630V 500V 630V PART NO. PLUG, CONNECTOR 9P CONNECTOR, BOARD TO BOARD 8P CONNECTOR, ONE TOUCH DIODE L801 L802 L803 L901 L1805 1-406-989-21 1-419-633-11 1-412-529-81 1-410-473-11 1-406-677-11 INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR 10MH 10MH 22µH 18µH 10MH TRANSISTOR Q805 Q807 Q808 Q812 Q901 6-550-106-01 8-729-931-45 6-550-106-01 8-729-026-39 8-729-053-87 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR KTB764 IRF614 KTB764 2SA933AS-QT KTC4370A Q902 Q903 Q904 Q905 Q906 6-550-247-01 8-729-422-27 8-729-422-27 8-729-424-02 8-729-120-28 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR KTA1659A 2SD601A-Q 2SD601A-Q 2SB709A-QRS-TX 2SC1623-L5L6 Q907 Q908 Q1810 Q2801 Q2802 8-729-120-28 8-729-424-02 8-729-043-95 8-729-422-27 8-729-424-02 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC1623-L5L6 2SB709A-QRS-TX 2SC3840(3) 2SD601A-Q 2SB709A-QRS-TX Q2803 Q2804 8-729-424-02 8-729-424-02 TRANSISTOR TRANSISTOR 2SB709A-QRS-TX 2SB709A-QRS-TX D804 D805 D806 D807 D808 8-719-074-25 8-719-991-33 8-719-991-33 8-719-210-21 8-719-991-33 DIODE DIODE DIODE DIODE DIODE PG104R 1SS133T-77 1SS133T-77 11EQS04 1SS133T-77 D813 D901 D902 D903 D905 8-719-991-33 8-719-924-11 8-719-924-11 8-719-991-33 8-719-404-50 DIODE DIODE DIODE DIODE DIODE 1SS133T-77 MTZJ-T-77-22 MTZJ-T-77-22 1SS133T-77 MA111-TX D906 D907 D908 D1809 D1810 8-719-404-50 8-719-404-50 8-719-404-50 8-719-110-41 8-719-970-87 DIODE DIODE DIODE DIODE DIODE MA111-TX MA111-TX MA111-TX RD15ESB2 ERA38-06 R809 D1811 D1812 D2801 D2802 8-719-970-87 8-719-081-93 8-719-109-89 8-719-991-33 DIODE DIODE DIODE DIODE ERA38-06 1N4937/23 RD5.6ESB2 1SS133T-77 R814 IC UPC5023CS-184 RESISTOR R809 R811 R815 R817 1-216-829-11 METAL CHIP (KV-27FS320 ONLY) 1-216-832-11 METAL CHIP (ALL EXCEPT KV-27FS320) 1-249-393-11 CARBON 4.7K 5% 1/10W 8.2K 5% 1/10W 10 5% 1/4W 1-215-862-11 METAL OXIDE (ALL EXCEPT KV-27FS320) 1-215-862-11 METAL OXIDE 1-218-879-11 METAL CHIP (KV-27FS320 ONLY) 68 5% 1W 68 22K 5% 1W 0.50% 1/10W 18K 0.50% 1/10W IC IC801 6-701-598-01 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 R817 1-218-877-11 METAL CHIP (ALL EXCEPT KV-27FS320) 100 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 V REF. NO. PART NO. DESCRIPTION VALUES REF. NO. 1-216-809-11 METAL CHIP 1-216-841-11 METAL CHIP 1-216-839-11 METAL CHIP (KV-27FS320 ONLY) 1-216-837-11 METAL CHIP (ALL EXCEPT KV-27FS320) 100 47K 33K 5% 5% 5% 1/10W 1/10W 1/10W R890 22K 5% 1/10W 5.6K 5% 1/10W 8.2K 5% 1/10W R822 1-216-830-11 METAL CHIP (KV-27FS320 ONLY) 1-216-832-11 METAL CHIP (ALL EXCEPT KV-27FS320) 1-216-841-11 METAL CHIP 47K 5% 1/10W R824 R825 R826 R827 R828 1-218-895-11 1-216-845-11 1-249-421-11 1-218-863-11 1-218-883-11 METAL CHIP METAL CHIP CARBON METAL CHIP METAL CHIP 100K 100K 2.2K 4.7K 33K 0.50% 5% 5% 0.50% 0.50% 1/10W 1/10W 1/4W 1/10W 1/10W R829 R833 1-216-853-11 METAL CHIP 1-218-865-11 METAL CHIP (KV-27FS320 ONLY) 1-218-867-11 METAL CHIP (ALL EXCEPT KV-27FS320) 470K 5.6K 5% 1/10W 0.50% 1/10W 6.8K 0.50% 1/10W 1-218-859-11 METAL CHIP (KV-27FS320 ONLY) 1-218-855-11 METAL CHIP (ALL EXCEPT KV-27FS320) 1-218-869-11 METAL CHIP (KV-27FS320 ONLY) 3.3K 0.50% 1/10W 2.2K 0.50% 1/10W 8.2K 0.50% 1/10W 1-218-855-11 METAL CHIP 1-218-863-11 METAL CHIP (KV-27FS320 ONLY) 1-218-867-11 METAL CHIP (ALL EXCEPT KV-27FS320) 2.2K 4.7K 0.50% 1/10W 0.50% 1/10W 6.8K 0.50% 1/10W 1-218-855-11 METAL CHIP 1-218-871-11 METAL CHIP 1-218-861-11 METAL CHIP 1-218-877-11 METAL CHIP (KV-27FS320 ONLY) 2.2K 10K 3.9K 18K 8.2K 0.50% 1/10W R860 R864 R866 1-218-869-11 METAL CHIP (ALL EXCEPT KV-27FS320) 1-218-871-11 METAL CHIP 1-218-823-11 METAL CHIP 1-249-438-11 CARBON 10K 100 56K 0.50% 1/10W 0.50% 1/10W 5% 1/4W R870 R876 1-216-825-11 1-216-821-11 2.2K 1K 5% 5% R818 R819 R820 R820 R821 R821 R833 R834 R834 R837 R840 R841 R841 R842 R855 R856 R857 R857 METAL CHIP METAL CHIP 0.50% 0.50% 0.50% 0.50% 1/10W 1/10W 1/10W 1/10W KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 DESCRIPTION VALUES 68K 0.50% 1/10W 6.8K 0.50% 1/10W R893 1-218-891-11 METAL CHIP (KV-27FS320 ONLY) 1-218-867-11 METAL CHIP (ALL EXCEPT KV-27FS320) 1-216-839-11 METAL CHIP 33K 5% 1/10W R901 R902 R903 R904 R905 1-249-405-11 1-249-385-11 1-249-414-11 1-249-432-11 1-249-421-11 CARBON CARBON CARBON CARBON CARBON 100 2.2 560 18K 2.2K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R906 R907 R908 R909 R910 1-249-432-11 1-249-385-11 1-249-414-11 1-260-316-51 1-215-915-11 CARBON CARBON CARBON CARBON METAL OXIDE 18K 2.2 560 100 470 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/2W 3W R911 R912 R913 R914 R915 1-215-405-00 1-249-407-11 1-215-391-00 1-249-416-11 1-249-425-11 METAL CARBON METAL CARBON CARBON 220 150 56 820 4.7K 1% 5% 1% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R917 R918 R919 R921 R922 1-249-425-11 1-249-401-11 1-249-401-11 1-249-429-11 1-249-397-11 CARBON CARBON CARBON CARBON CARBON 4.7K 47 47 10K 22 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R923 R930 R931 R932 R933 1-249-401-11 1-216-864-11 1-249-421-11 1-218-851-11 1-216-864-11 CARBON SHORT CHIP CARBON METAL CHIP SHORT CHIP 47 5% 1/4W 2.2K 1.5K 5% 1/4W 0.50% 1/10W R935 R938 R1845 R1846 R1847 1-249-405-11 1-216-864-11 1-249-441-11 1-249-441-11 1-249-441-11 CARBON SHORT CHIP CARBON CARBON CARBON 100 5% 1/4W 100K 100K 100K 5% 5% 5% 1/4W 1/4W 1/4W R1848 R1849 1-215-894-11 METAL OXIDE 1-243-617-71 METAL OXIDE (KV-27FS320 ONLY) 1-243-610-71 METAL OXIDE (ALL EXCEPT KV-27FS320) 2.2K 8.2K 5% 5% 2W 3W 2.2K 5% 3W 1-243-617-71 METAL OXIDE (KV-27FS320 ONLY) 1-243-610-71 METAL OXIDE (ALL EXCEPT KV-27FS320) 8.2K 5% 3W 2.2K 5% 3W R890 R1849 1/10W 1/10W PART NO. R1850 R1850 101 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 NOTE: The components identified by shading and ! mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION NOTE: Les composants identifies per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero specifie. VALUES REF. NO. R1851 R1852 R2800 R2801 R2802 1-215-922-11 1-215-922-11 1-216-837-11 1-216-841-11 1-216-833-11 METAL OXIDE METAL OXIDE METAL CHIP METAL CHIP METAL CHIP 6.8K 6.8K 22K 47K 10K 5% 5% 5% 5% 5% 3W 3W 1/10W 1/10W 1/10W R2803 R2804 R2805 R2807 R2808 1-216-837-11 1-216-833-11 1-216-829-11 1-216-827-11 1-216-833-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 22K 10K 4.7K 3.3K 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W HN 1-424-584-31 1-126-939-11 1-126-964-11 1-126-964-11 CN1601 CN1602 1-564-506-11 1-564-506-11 8-759-450-47 1-576-337-21 SCREW (M3X10), P, SW (+) C1309 C1311 C1315 C1325 C1327 1-162-927-11 1-124-779-00 1-107-826-11 1-107-826-11 1-124-779-00 CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP 100pF 10µF 0.1µF 0.1µF 10µF 5% 20% 10% 10% 20% 50V 16V 16V 16V 16V ELECT ELECT ELECT C1328 C1329 C1330 C1331 C1333 1-107-826-11 1-124-779-00 1-107-826-11 1-124-779-00 1-107-826-11 CERAMIC CHIP ELECT CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP 0.1µF 10µF 0.1µF 10µF 0.1µF 10% 20% 10% 20% 10% 16V 16V 16V 16V 16V C1334 C1335 C1336 C1337 C1339 1-107-826-11 1-107-826-11 1-107-826-11 1-127-692-11 1-107-826-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1µF 0.1µF 0.1µF 10µF 0.1µF 10% 10% 10% 10% 10% 16V 16V 16V 16V 16V C1341 C1342 C1343 C1344 C1346 1-107-826-11 1-107-826-11 1-107-826-11 1-107-826-11 1-107-826-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1µF 0.1µF 0.1µF 0.1µF 0.1µF 10% 10% 10% 10% 10% 16V 16V 16V 16V 16V C1347 C1348 C1349 C1350 C1351 1-127-692-11 1-107-826-11 1-107-826-11 1-107-826-11 1-107-826-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 10µF 0.1µF 0.1µF 0.1µF 0.1µF 10% 10% 10% 10% 10% 16V 16V 16V 16V 16V C1352 C1353 C1354 C1355 1-107-826-11 1-124-779-00 1-124-779-00 1-107-826-11 CERAMIC CHIP ELECT CHIP ELECT CHIP CERAMIC CHIP 0.1µF 10µF 10µF 0.1µF 10% 20% 20% 10% 16V 16V 16V 16V TRANSFORMER, FERRITE (DFT) 10000µF 20% 10µF 20% 10µF 20% 16V 50V 50V PLUG, CONNECTOR PLUG, CONNECTOR 3P 3P IC BA05T IC LINK 2.7A 50V RESISTOR R1600 1-205-997-31 CAPACITOR 50V 50V 50V 50V 50V IC LINK PS1600 Due to the complexity of this board, performing component level field repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. 5% 5% 5% 5% 5% IC IC1600 * A-1056-114-A HM BOARD, MOUNTED (KV-27FS320, 32FS320, 36FS320 ONLY) 100pF 100pF 100pF 100pF 100pF CONNECTOR * * HM CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CAPACITOR C1601 C1602 C1603 VALUES 1-162-927-11 1-162-927-11 1-162-927-11 1-162-927-11 1-162-927-11 * A-1054-787-A HN BOARD, MOUNTED (KV-27FS320, 32FS320, 36FS320 ONLY) 4-382-854-11 DESCRIPTION C1301 C1302 C1303 C1307 C1308 TRANSFORMER ! T504 PART NO. V HN HM CEMENTED 2.2 5% KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 10W 102 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 HM REF. NO. PART NO. DESCRIPTION VALUES REF. NO. C1356 C1357 C1358 C1359 C1360 1-107-826-11 1-107-826-11 1-107-826-11 1-124-779-00 1-124-779-00 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP 0.1µF 0.1µF 0.1µF 10µF 10µF 10% 10% 10% 20% 20% 16V 16V 16V 16V 16V C1361 C1362 C1363 C1364 C1365 1-107-826-11 1-107-826-11 1-107-826-11 1-107-826-11 1-124-779-00 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP 0.1µF 0.1µF 0.1µF 0.1µF 10µF 10% 10% 10% 10% 20% 16V 16V 16V 16V 16V C1366 C1367 C1368 C1369 C1370 1-107-826-11 1-127-692-11 1-124-779-00 1-107-826-11 1-124-779-00 CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP ELECT CHIP 0.1µF 10µF 10µF 0.1µF 10µF 10% 10% 20% 10% 20% 16V 16V 16V 16V 16V C1371 C1373 C1374 C1375 C1376 1-107-826-11 1-162-920-11 1-107-826-11 1-124-779-00 1-107-826-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP 0.1µF 27pF 0.1µF 10µF 0.1µF 10% 5% 10% 20% 10% 16V 50V 16V 16V 16V C1377 C1378 C1385 C1386 C1387 1-107-826-11 1-162-920-11 1-107-826-11 1-107-826-11 1-107-826-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1µF 27pF 0.1µF 0.1µF 0.1µF 10% 5% 10% 10% 10% 16V 50V 16V 16V 16V C1392 C1393 C1394 C1395 C1396 1-162-974-11 1-164-346-11 1-162-965-11 1-162-965-11 1-124-779-00 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP 0.01µF 1µF 0.0015µF 10% 0.0015µF 10% 10µF 20% 50V 16V 50V 50V 16V C1397 C1398 C1399 C1400 C1401 1-162-965-11 1-124-779-00 1-162-965-11 1-107-826-11 1-107-826-11 CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.0015µF 10µF 0.0015µF 0.1µF 0.1µF 10% 20% 10% 10% 10% 50V 16V 50V 16V 16V C1402 C1404 C1480 C1481 C1482 1-124-778-00 1-162-970-11 1-107-826-11 1-107-826-11 1-107-826-11 ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 22µF 0.01µF 0.1µF 0.1µF 0.1µF 20% 10% 10% 10% 10% 6.3V 25V 16V 16V 16V C1483 C1484 C1485 1-107-826-11 1-107-826-11 1-107-826-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1µF 0.1µF 0.1µF 10% 10% 10% 16V 16V 16V KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 PART NO. DESCRIPTION VALUES CONNECTOR * CN1302 CN1303 CN1304 1-564-515-11 1-564-506-11 1-817-653-11 PLUG, CONNECTOR 12P PLUG, CONNECTOR 3P MEMORY STICK CONNECTOR DIODE D1306 D1307 D1308 D1309 D1310 8-719-800-76 8-719-800-76 8-719-800-76 6-500-182-01 8-719-083-58 DIODE DIODE DIODE DIODE DIODE 1SS226 1SS226 1SS226 L1503CB/ID UDZSTE-173.9B D1311 D1312 D1313 D1314 8-719-800-76 8-719-914-43 8-719-914-44 8-719-977-28 DIODE DIODE DIODE DIODE 1SS226 DAN202K DAP202K DTZ10B FERRITE BEAD FB1302 FB1303 FB1304 FB1305 FB1306 1-414-229-11 1-414-229-11 1-414-229-11 1-414-229-11 1-400-089-21 FERRITE FERRITE FERRITE FERRITE FERRITE 0µH 0µH 0µH 0µH 0µH FB1307 FB1308 FB1309 FB1310 FB1311 1-414-229-11 1-414-229-11 1-414-229-11 1-414-229-11 1-414-229-11 FERRITE FERRITE FERRITE FERRITE FERRITE 0µH 0µH 0µH 0µH 0µH FB1312 FB1313 FB1315 1-414-921-11 1-414-229-11 1-400-089-21 FERRITE FERRITE FERRITE 0µH 0µH 0µH FERRITE FERRITE FERRITE 0µH 0µH 0µH FILTER FL1306 FL1307 FL1309 1-234-126-21 1-234-126-21 1-234-126-21 IC IC1302 IC1303 IC1304 IC1308 IC1310 IC1311 6-704-819-01 8-749-015-18 8-749-015-18 6-804-442-01 6-706-283-01 6-706-452-01 IC CS4335-KSZR IC PQ07VZ012ZP IC PQ07VZ012ZP IC MBM29LV160BE90TN-E1-BA6L-ER IC ES6425FF IC IS42S16400B-7TL-TR 103 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 HM REF. NO. PART NO. DESCRIPTION VALUES REF. NO. COIL L1301 L1302 L1303 L1304 1-469-549-21 1-469-549-21 1-469-549-21 1-469-549-21 INDUCTOR INDUCTOR INDUCTOR INDUCTOR 1µH 1µH 1µH 1µH TRANSISTOR Q1301 Q1302 Q1303 Q1304 Q1305 8-729-424-02 8-729-422-27 8-729-424-02 8-729-028-28 8-729-028-28 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SB709A-QRS-TX 2SD601A-Q 2SB709A-QRS-TX 2SK2036(TE85L) 2SK2036(TE85L) RESISTOR R1307 R1308 R1309 R1310 R1314 1-218-285-11 1-218-285-11 1-218-285-11 1-218-659-11 1-216-829-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 75 75 75 43 4.7K 5% 5% 5% 0.50% 5% R1345 R1348 R1351 R1352 R1355 1-216-864-11 1-216-864-11 1-216-864-11 1-218-682-11 1-216-803-11 SHORT CHIP SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP 390 33 0.50% 1/10W 5% 1/10W R1356 R1357 R1358 R1359 R1360 1-218-692-11 1-216-803-11 1-216-864-11 1-218-672-11 1-218-692-11 METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP 1K 33 0.50% 1/10W 5% 1/10W 150 1K 0.50% 1/10W 0.50% 1/10W R1363 R1366 R1367 R1369 R1371 1-216-803-11 1-216-864-11 1-218-686-11 1-216-803-11 1-216-803-11 METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP 33 5% 560 33 33 0.50% 1/10W 5% 1/10W 5% 1/10W R1372 R1374 R1375 R1376 R1379 1-218-696-11 1-216-803-11 1-216-829-11 1-216-829-11 1-216-829-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 1.5K 33 4.7K 4.7K 4.7K 0.50% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R1382 R1383 R1385 R1386 R1387 1-216-829-11 1-216-829-11 1-216-845-11 1-216-813-11 1-216-803-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 4.7K 4.7K 100K 220 33 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W PART NO. DESCRIPTION R1389 R1391 R1397 R1398 R1399 1-216-803-11 1-216-797-11 1-216-813-11 1-216-864-11 1-216-864-11 METAL CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP R1400 R1401 R1403 R1404 R1408 1-216-864-11 1-216-864-11 1-216-803-11 1-216-803-11 1-216-803-11 R1409 R1410 R1411 R1415 R1420 VALUES 33 10 220 5% 5% 5% 1/10W 1/10W 1/10W SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP 33 33 33 5% 5% 5% 1/10W 1/10W 1/10W 1-216-803-11 1-216-803-11 1-216-803-11 1-216-813-11 1-216-803-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 33 33 33 220 33 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R1421 R1422 R1423 R1424 R1426 1-216-803-11 1-216-803-11 1-216-803-11 1-216-803-11 1-216-829-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 33 33 33 33 4.7K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R1433 R1434 R1435 R1436 R1437 1-216-803-11 1-216-803-11 1-216-818-11 1-216-818-11 1-216-833-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 33 33 560 560 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R1438 R1439 R1440 R1441 R1442 1-216-833-11 1-216-850-11 1-216-850-11 1-216-801-11 1-216-801-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 10K 270K 270K 22 22 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R1443 R1444 R1445 R1446 R1447 1-216-801-11 1-218-692-11 1-216-821-11 1-216-809-11 1-216-833-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 22 1K 1K 100 10K 5% 0.50% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R1448 R1449 R1450 R1451 R1453 1-216-845-11 1-216-817-11 1-216-841-11 1-216-841-11 1-216-833-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100K 470 47K 47K 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R1454 R1455 R1456 R1457 1-216-833-11 1-216-809-11 1-216-809-11 1-216-864-11 METAL CHIP METAL CHIP METAL CHIP SHORT CHIP 10K 100 100 5% 5% 5% 1/10W 1/10W 1/10W 104 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 HM HR HU REF. NO. R1458 R1459 R1460 R1461 PART NO. 1-216-864-11 1-216-864-11 1-216-864-11 1-216-803-11 DESCRIPTION SHORT CHIP SHORT CHIP SHORT CHIP METAL CHIP VALUES REF. NO. PART NO. DESCRIPTION VALUES IC IC3001 33 5% 1/10W 1-233-574-11 1-233-574-11 1-233-574-11 1-233-574-11 1-233-574-11 RES, CHIP NETWORK RES, CHIP NETWORK RES, CHIP NETWORK RES, CHIP NETWORK RES, CHIP NETWORK 10 10 10 10 10 (3216) (3216) (3216) (3216) (3216) RB1409 RB1410 RB1411 RB1412 RB1413 1-233-574-11 1-233-574-11 1-234-524-21 1-234-524-21 1-234-524-21 RES, CHIP NETWORK RES, CHIP NETWORK RES, CHIP NETWORK RES, CHIP NETWORK RES, CHIP NETWORK 10 10 33 33 33 (3216) (3216) (3216) (3216) (3216) RB1414 RB1415 RB1416 RB1417 RB1418 1-234-524-21 1-234-524-21 1-234-524-21 1-234-524-21 1-234-524-21 RES, CHIP NETWORK RES, CHIP NETWORK RES, CHIP NETWORK RES, CHIP NETWORK RES, CHIP NETWORK 33 33 33 33 33 (3216) (3216) (3216) (3216) (3216) RB1419 RB1420 RB1421 1-234-524-21 1-234-524-21 1-234-524-21 RES, CHIP NETWORK 33 (3216) RES, CHIP NETWORK 33 (3216) RES, CHIP NETWORK 33 (3216) HYB IC SBX3071-71 CARBON CARBON 1K 100 RESISTOR RESISTOR BRIDGE RB1404 RB1405 RB1406 RB1407 RB1408 8-742-211-20 R3001 R3014 1-249-417-11 1-247-807-31 5% 5% 1/4W 1/4W 5% 5% 50V 50V SWITCH S3006 HU 1-786-338-12 SWITCH, TACTILE * A-1415-872-A HU BOARD, MOUNTED (KV-27FS320/32FS320/36FS320 ONLY) CAPACITOR C2234 C2235 HR 1-795-502-21 * VIBRATOR, CRYSTAL * A-1415-870-A HR BOARD, MOUNTED (KV-27FS320/32FS320/36FS320 ONLY) 1-104-665-11 100µF CN3001 1-564-521-11 20% PLUG, CONNECTOR 6P DIODE DIODE LNJ801LPDJA PDZ5.6B-115 DIODE D3002 D3004 8-719-057-09 8-719-070-57 1-564-509-11 PLUG, CONNECTOR 6P D301 D2235 D2236 D2238 D2239 8-719-108-12 8-719-108-12 8-719-108-12 8-719-109-93 8-719-109-93 DIODE DIODE DIODE DIODE DIODE RD9.1EW RD9.1EW RD9.1EW RD6.2ESB2 RD6.2ESB2 D2240 D2241 8-719-929-15 8-719-929-15 DIODE DIODE HZS9.1NB2 HZS9.1NB2 JACK, PIN 3P JACK CONNECTOR * CN1001 J2231 ELECT 0.47µF 0.47µF DIODE CAPACITOR C3001 FILM FILM CONNECTOR CRYSTAL X1301 1-137-194-81 1-137-194-81 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 25V 1-794-048-11 RESISTOR R1001 R1002 R1003 R2008 R2009 1-249-427-11 1-249-421-11 1-249-419-11 1-249-427-11 1-249-421-11 CARBON CARBON CARBON CARBON CARBON 6.8K 2.2K 1.5K 6.8K 2.2K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R2010 R2011 R2235 R2236 1-249-416-11 1-249-415-11 1-249-409-11 1-249-441-11 CARBON CARBON CARBON CARBON 820 680 220 100K 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 105 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 HU HD HS REF. NO. PART NO. DESCRIPTION VALUES REF. NO. R2237 1-249-409-11 CARBON 220 5% 1/4W R2238 R2240 1-249-441-11 1-247-804-11 CARBON CARBON 100K 75 5% 5% 1/4W 1/4W 1-762-816-11 1-762-816-11 1-692-431-21 1-692-431-21 1-692-431-21 SWITCH, TACTILE SWITCH, TACTILE SWITCH, TACTILE SWITCH, TACTILE SWITCH, TACTILE S2004 S2005 1-692-431-21 1-692-431-21 SWITCH, TACTILE SWITCH, TACTILE HD HS ELECT ELECT ELECT 100µF 1µF 1µF 20% 20% 20% 25V 50V 50V * D1001 D1002 D1003 D1004 D1005 8-719-929-15 8-719-070-80 8-719-929-15 8-719-929-15 8-719-929-15 DIODE DIODE DIODE DIODE DIODE HZS9.1NB2 LNK0120022G HZS9.1NB2 HZS9.1NB2 HZS9.1NB2 D1233 D1235 D1236 8-719-108-12 8-719-108-12 8-719-108-12 DIODE DIODE DIODE RD9.1EW RD9.1EW RD9.1EW IC 8-742-212-20 * * * * * * HYB IC SBX3081-71 * JACK * J1231 CARBON CARBON CARBON CARBON CARBON 1K 100 6.8K 2.2K 820 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R1011 R1201 R1202 R1203 R1234 1-249-415-11 1-249-419-11 1-249-421-11 1-249-427-11 1-247-804-11 CARBON CARBON CARBON CARBON CARBON 680 1.5K 2.2K 6.8K 75 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R1235 R1236 R1237 R1238 1-249-409-11 1-249-441-11 1-249-409-11 1-249-441-11 CARBON CARBON CARBON CARBON 220 100K 220 100K 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1-794-048-11 JACK, PIN 3P KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 S1001 S1002 S1003 S1004 S1005 1-692-431-21 1-692-431-21 1-692-431-21 1-692-431-21 1-692-431-21 SWITCH, TACTILE SWITCH, TACTILE SWITCH, TACTILE SWITCH, TACTILE SWITCH, TACTILE S1006 S1007 S1008 1-692-431-21 1-762-816-11 1-762-816-11 SWITCH, TACTILE SWITCH, TACTILE SWITCH, TACTILE ACCESSORIES AND PACKING DIODE IC1001 1-249-417-11 1-247-807-31 1-249-427-11 1-249-421-11 1-249-416-11 SWITCH * A-1415-723-A HS BOARD, MOUNTED (KV-32FS120/34FS120/36FS120/38FS120 ONLY) 1-104-665-11 1-126-960-11 1-126-960-11 VALUES R1004 R1007 R1008 R1009 R1010 * A-1415-873-A HD BOARD, MOUNTED (SPACER BOARD) (KV-27FS320/32FS320/36FS320 ONLY) CAPACITOR C1001 C1234 C1235 DESCRIPTION RESISTOR SWITCH S1007 S1008 S2001 S2002 S2003 PART NO. 4-041-259-05 BAG, PROTECTION (KV-27FS320 ONLY) 4-066-845-02 BAG, PROTECTION (KV-32FS120/34FS120 ONLY) 4-066-646-02 BAG, PROTECTION (KV-36FS120/38FS120 ONLY) 4-103-197-01 CARTON INDIVIDUAL (KV-32FS120 ONLY) 4-103-489-01 CARTON, HSC (KV-36FS320 ONLY) 4-103-473-01 CARTON, INDIVIDUAL (KV-27FS320 ONLY) 4-103-481-01 CARTON, INDIVIDUAL (KV-32FS320 ONLY) 4-103-477-01 CARTON, INDIVIDUAL (KV-34FS120 ONLY) 4-103-483-01 CARTON, INDIVIDUAL (KV-36FS120 ONLY) 106 KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 REF. NO. PART NO. DESCRIPTION VALUES * 4-103-485-01 CARTON, INDIVIDUAL (KV-38FS120 ONLY) * 4-085-911-03 CUSHION, FRONT (UPPER) (KV-32FS320 ONLY) 4-087-953-01 CUSHION, FRONT (UPPER) (KV-36FS120/38FS120 ONLY) 4-086-352-02 CUSHION, FRONT (UPPER) (KV-36FS320 ONLY) REF. NO. * * * * * * * * * * * * PART NO. VALUES 4-096-449-01 CUSHION, UPPER (KV-27FS320 ONLY) 4-088-740-01 CUSHION, UPPER (KV-32FS120/34FS120 ONLY) 4-093-139-11 INSERT, DOOR BREAKAGE (L) (KV-27FS320/32FS320/36FS320 ONLY) 4-101-939-31 MANUAL, INSTRUCTION (KV-27FS32/32FS320/36FS320 CND ONLY) 4-101-939-21 MANUAL, INSTRUCTION (KV-27FS320/32FS320/36FS320 US & HAWAII ONLY) 4-101-940-31 MANUAL, INSTRUCTION (KV-32FS120/36FS120 CND ONLY) 4-101-940-21 MANUAL, INSTRUCTION (KV-32FS120/36FS120 US ONLY) 4-101-940-41 MANUAL, INSTRUCTION (KV-34FS120/38FS120 ONLY) 4-088-742-01 CUSHION, LOWER (KV-32FS120/34FS120 ONLY) 4-085-913-02 CUSHION, LOWER (KV-32FS320 ONLY) 4-087-955-01 CUSHION, LOWER (KV-36FS120/38FS120 ONLY) 4-086-354-03 CUSHION, LOWER (KV-36FS320 ONLY) 4-088-741-01 CUSHION, REAR (UPPER) (KV-32FS120/34FS120 ONLY) 4-085-912-02 CUSHION, REAR (UPPER) (KV-32FS320 ONLY) 4-087-954-02 CUSHION, REAR (UPPER) (KV-36FS120/38FS120 ONLY) 4-086-353-03 CUSHION, REAR (UPPER) (KV-36FS320 ONLY) REMOTE COMMANDER 1-478-707-11 REMOTE COMMANDER RM-Y195 4-978-977-11 BATTERY COVER (for RM-Y195) (KV-32FS120/34FS120/36FS120/38FS120 ONLY) 1-478-708-11 REMOTE COMMANDER RM-Y196 4-978-977-11 BATTERY COVER (for RM-Y196) (KV-27FS320/32FS320/36FS320 ONLY) Sony Corporation 9-965-964-01 DESCRIPTION Sony Technology Center Technical Services Service Promotion Department KV-27FS320/32FS120/32FS320/34FS120/36FS120/36FS320/38FS120 English 2004EJ74WEB-1 Printed in USA © 2004.5 107 SERVICE MANUAL BA-6 CHASSIS In an effort to reduce the size of this pdf file the tiled schematics are not attached to this Service Manual. To receive a complete set of the tiled schematics for this manual please submit a request to Nita Wardlaw at [email protected]. 01US01COV-BR2.book Page 1 Thursday, March 25, 2004 4:23 PM Connecting Additional Equipment 4-101-940-21 (1) Operating Instructions KV-32FS120 KV-36FS120 © 2004 by Sony Corporation 01US01COV-BR2.book Page 2 Thursday, March 25, 2004 4:23 PM User Guide 01US01COV-BR2.book Page 3 Thursday, March 25, 2004 4:23 PM Connecting Additional Equipment WARNING ✍ To reduce the risk of fire or electric shock, do not expose the TV to rain or moisture. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. NOTIFICATION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ❏ ❏ ❏ This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Note to the CATV Installer This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. SAFETY PRECAUTIONS ❏ ❏ ❏ Operate the TV only on 120 V AC. One blade of the power plug is wider than the other for safety purposes and will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer. If any liquid or solid object falls into the TV, unplug it and have it checked by qualified personnel before operating it further. CAUTION When using TV games, computers, and similar products with your TV, keep the brightness and contrast functions at low settings. If a fixed (non-moving) pattern is left on the screen for long periods of time at a high brightness or contrast setting, the image can be permanently imprinted onto the screen. Continuously watching the same channel can cause the imprint of station logos onto the TV screen. These types of imprints are not covered by your warranty because they are the results of misuse. To reduce the risk of electric shock, do not use this polarized plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted to prevent blade exposure. ❏ Reorient or relocate the receiving antennas. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Protecting the TV ❏ ❏ To prevent internal heat build-up, do not block the ventilation openings. Do not install the TV in a hot or humid place, or in a place subject to excessive dust or mechanical vibration. Note on Caption Vision This television receiver provides display of television closed captioning in accordance with § 15.119 of the FCC rules. Use of this television for other than private viewing of programs broadcast on UHF or VHF or transmitted by cable companies for the use of the general public may require authorization from the broadcaster-cable company and/or program owner. Owner’s Record The model and serial numbers are located on the front cover of this manual and at the rear of your TV. Trademarks and Copyrights ENERGY STAR is a registered mark. As an ENERGY STAR® Partner, Sony has determined that this product or product model meets the ENERGY STAR® guidelines for energy efficiency. SRS and the ( Labs, Inc. )® symbol are trademarks of SRS Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP 4638258, 5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. WEGA, FD Trinitron, Steady Sound and Caption Vision are registered trademarks of Sony Corporation. 01US01COV-BR2.book Page 4 Thursday, March 25, 2004 4:23 PM User Guide IMPORTANT SAFEGUARDS For your protection, please read these instructions completely, and keep this manual for future reference. Carefully observe and comply with all warnings, cautions and instructions placed on the set, or described in the operating instructions or service manual. WARNING To guard against injury, the following basic safety precautions should be observed in the installation, use, and servicing of the set. Use Power Sources This set should be operated only from the type of power source indicated on the serial/model plate. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company. For those sets designed to operate from battery power, refer to the operating instructions. Attachments Do not use attachments not recommended by the manufacturer, as they may cause hazards. Do not place any objects, especially heavy objects, on top of the set. The object may fall from the set, causing injury. Cleaning Unplug the set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set. If a snapping or popping sound from a TV set is continuous or frequent while the TV is operating, unplug the TV and consult your dealer or service technician. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being turned on or off. Grounding or Polarization Installation This set may be equipped with a polarized alternating current line plug (a plug having one blade wider than other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Always use two or more people to lift or move the set. The set is heavy and the bottom surface is flat. Serious injury can result from trying to move the set by yourself alone, or from unsteady handling. Install the set on a stable, level surface. For the set with a three-wire grounding type AC plug This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the grounding plug. Overloading Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock. Always turn the set off when it is not to be used. When the set is left unattended and unused for long periods of time, unplug it from the wall outlet as a precaution against the possibility of an internal malfunction that could create a fire hazard. Do not disconnect the antenna or the power cord during a heavy storm. Lightning may strike while you are holding the cable or cord, causing serious injury. Turn off your TV and wait for the weather to improve. Object and Liquid Entry Never push objects of any kind into the set through the cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the set. Water and Moisture Do not use power-line operated sets near water — for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. Accessories Do not place the set on an unstable cart, stand, tripod, bracket, table, or shelf. The set may fall, causing serious injury to a child or an adult, and serious damage to the set. Use only a cart or stand recommended by the manufacturer for the specific model of TV. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Ventilation The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered. • Never cover the slots and openings with a cloth or other materials. 01US01COV-BR2.book Page 5 Thursday, March 25, 2004 4:23 PM Connecting Additional Equipment • Never block the slots and openings by placing the set on a bed, sofa, rug or other similar surface. • Never place the set in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided. • Do not place the set near or over a radiator or heat register, or where it is exposed to direct sunlight. Service Damage Requiring Service Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions: • When the power cord or plug is damaged or frayed. • If liquid has been spilled into the set or objects have fallen into the product. • If the set has been exposed to rain or water. • If the set has been subject to excessive shock by being dropped, or the cabinet has been damaged. • If the set does not operate normally when following the operating instructions. Adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the set to normal operation. • When the set exhibits a distinct change in performance — this indicates a need for service. Power-Cord Protection Do not allow anything to rest on or roll over the power cord, and do not place the set where the power cord is subject to wear or abuse. Antennas Outdoor Antenna Grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits. WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in USA and Section 54 of the Canadian Electrical Code in Canada provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Antenna Grounding According to the NEC Antenna Grounding According to the National Electrical Code, ANSI/NFPA 70. ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT NEC - NATIONAL ELECTRIC CODE GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ARTICLE 250, PART H) Lightning For added protection for this television receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the receiver due to lightning and power-line surges. Servicing Do not attempt to service the set yourself since opening the cabinet may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Replacement Parts When replacement parts are required, be sure the service technician certifies in writing that he has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards. Safety Check Upon completion of any service or repairs to the set, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the set is in safe operating condition, and to so certify. When the set reaches the end of its useful life, improper disposal could result in a picture tube implosion. Ask a qualified service technician to dispose of the set. 01US01COV-BR2.book Page 6 Thursday, March 25, 2004 4:23 PM User Guide 01US01COV-BR2.book Page 1 Thursday, March 25, 2004 4:23 PM Contents Introduction Introducing the FD Trinitron WEGA® Features......................................................................... 1 About this Manual.......................................................................................................................... 2 Batteries for the Remote Control .................................................................................................. 2 Front Panel Menu Controls ........................................................................................................... 2 Using the Remote Control Remote Control Description.......................................................................................................... 3 Programming the Remote Control............................................................................................... 5 Using your TV Remote Control with Other Equipment........................................................... 7 Connecting Your TV TV Rear Panel .................................................................................................................................. 9 Basic Connections ......................................................................................................................... 10 Connecting Additional Equipment............................................................................................ 11 Using Basic Functions Setting Up the TV.......................................................................................................................... 23 Quick Start to the Menus ............................................................................................................. 24 Using the Menus How to Access Menus.................................................................................................................. 27 Using the Video Menu ................................................................................................................ 28 Using the Audio Menu ............................................................................................................... 29 Using the Channel Setup Menu................................................................................................. 31 Using the Parental Control Menu .............................................................................................. 33 Parental Control..................................................................................................................... 34 United States: Selecting Custom Rating Options.............................................................. 36 Canada: Selecting Custom Rating Options........................................................................ 38 Using the Timer Menu ................................................................................................................ 39 Using the Setup Menu................................................................................................................. 40 Other Information Troubleshooting ............................................................................................................................ 41 Specifications ................................................................................................................................. 45 Index ...................................................................................................................................................... 47 01US01COV-BR2.book Page 2 Thursday, March 25, 2004 4:23 PM 01US01COV-BR2.book Page 1 Thursday, March 25, 2004 4:23 PM Introduction Congratulations on your purchase of the Sony FD Trinitron WEGA®. ® Introducing the FD Trinitron WEGA Features Some of the features you will enjoy include: ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ FD Trinitron Flat CRT — Delivers a picture with uncompromising accuracy and outstanding image detail via a technologically advanced tube. Y, PB, PR Inputs — Provides component video inputs for superior picture quality (480i only). BBE — Gives sound more impact by using audio technology to compensate for phase effects in speakers. SRS — Produces a dynamic three-dimensional sound for stereo programs. Parental Control (V-Chip) — Helps parents monitor what their children watch on TV by establishing rating limits. ClearEdge VM — Sharpens picture definition to give objects a crisp, clean edge. Favorite Channels — Provides instant access to your favorite channels with the touch of a button. Info Banner — Displays the name and the remaining time of the current program viewed, if available. Universal Remote Control — Operates your connected cable box, VCR, digital satellite receiver, DVD player, or DVD/VCR combination unit. Energy Star® — Meets the Energy Star guidelines for energy efficiency. Front Panel Controls — Allows access to the on-screen menus without the use of a remote control. Front A/V Inputs — Lets you quickly connect video games, camcorders, or stereo/mono equipment. 1 01US01COV-BR2.book Page 2 Thursday, March 25, 2004 4:23 PM About this Manual This manual provides instructions to help you enjoy your new TV. It shows you how to connect to an antenna or cable, cable box, VCR, DVD, satellite receiver, stereo system, or camcorder. Once your TV is connected, follow the instructions and use the remote control to access the on-screen menus. Batteries for the Remote Control Insert two AA (R6) batteries (supplied) into the remote control using the following illustration as a guide. ✍ ✍ Under normal conditions, batteries will last up to six months. If the remote control does not operate properly, the batteries might be worn out. If you will not be using the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage. Front Panel Menu Controls 4-089-016 >PC< The front Audio/Video panel controls allow you to access the menu without the remote control. ❏ ❏ ❏ ✍ 2 Press to display the on-screen menu. Use the and buttons on the front Audio/Video panel instead of your remote control. Use the button on the front Audio/Video panel to navigate through the menus, then select an item. The front panel controls also allow you to change your channels (CH+/-), adjust the volume (VOL +/-), and change video inputs. To navigate the menus with your remote control, see “Using the Menus” on page 27. 01US01COV-BR2.book Page 3 Thursday, March 25, 2004 4:23 PM Remote Control Using the Remote Control Remote Control Description Button A K B L C 1 MUTING Press to turn off the sound. Press again or press to restore sound. 2 SYSTEM OFF Press to turn off the equipment programmed into the remote control. See “Programming the Remote Control” on page 5. This button does not work with DVD/VCR combo units, and may not work with older Sony equipment. M 3 TV/VCR/DVD N D E O P 4 PICTURE MODE Q F G I U Press repeatedly to step through the available video picture modes: Vivid, Standard, Movie, and Pro. Also available in the Video menu. See “Using the Video Menu” on page 28 for details. Press repeatedly until the TV displays the time in minutes (15, 30, 45, 60, or 90) that you want the TV to remain on before shutting off automatically. Cancel by pressing until Sleep Off appears. 6 JUMP Press to jump back and forth between two channels. The TV alternates between the current channel and the last channel that you selected. JUMP will not work if any FUNCTION Mode (VCR/DVD, SAT/ CABLE, TV) is activated. 7 TV/SAT Press to switch between the TV and SAT (satellite) inputs when in SAT FUNCTION mode. S T Press to change the VHF/UHF output of the VCR (or DVD/VCR combination unit). If you have a non-Sony VCR or DVD, you will need to program the remote control to recognize your VCR or DVD. For details, see “Programming the Remote Control” on page 5. 5 SLEEP R H Description Press for a direct selection of Effect settings (Simulated, SRS, Off) when the remote is in TV FUNCTION mode. See “Using the Audio Menu” on page 29 for details. J 8 RESET Press to return to factory settings while in an on-screen menu. 9 VOL (volume) Press (+) or (-) to adjust the volume. q; CODE SET Press to program your remote control to operate connected video equipment. See “Programming the Remote Control” on page 5. 3 01US01COV-BR2.book Page 4 Thursday, March 25, 2004 4:23 PM Remote Control Button Description qa POWER buttons Press to turn on and off the TV and other audio/ video equipment you have programmed into the remote control. For instructions, see “Programming the Remote Control” on page 5. qs FUNCTION buttons Press to select the equipment (VCR/DVD, SAT/ CABLE, TV) that you want to operate with the remote control. The indicator (LED) lights up momentarily when pressed to show which device the remote control is operating. qd VCR/DVD (operating) Press to operate your VCR or DVD. The VCR or DVD must be programmed into the remote control. For instructions, see “Programming the Remote Control” on page 5. and (to record) Press the button and the button at the same time to record programs with your VCR. The remote control must be programmed before you can use REC. m Rewind. M Fast-forward. Play. Stop. x Pause. Press again to resume normal playback. X qf TV/VIDEO Press to cycle through available video inputs. qg DISPLAY Press once to display the current time (if set) and the program status such as channel number, Channel Label (if set), video input, Video Label (if set), and Info Banner (if set). Press again to turn off the display. qh MTS/SAP Press to cycle through the Multi-channel TV Sound (MTS) options: Stereo, Auto SAP (Second Audio Program), and Mono. qj Press to change channels. The channel changes after two seconds. 0 9 and ENTER ✍ 4 qk GUIDE Press to display the program guide of your satellite receiver. ql Press the arrow buttons to move the cursor in the on-screen menus. Press the center button to select an option. To use Favorite Channels, exit all menus and press . Press F or f to move the cursor to the desired channel number and press . See “Favorite Channels” on page 31 for details. w; MENU Press to display the on-screen menu. Press again to exit the menu at any time. wa CH (channel) Press to change channels. To scan rapidly through the channels, press and hold down the CH+ or CH- button. If you lose your remote control, see page 42. 01US01COV-BR2.book Page 5 Thursday, March 25, 2004 4:23 PM If you have video equipment other than Sony brand (or if you have a Sony DVD/VCR combination unit) that you want to control with the TV’s remote control, use the following procedure to program the remote control. 1 Check the list of “Manufacturer’s Codes” on page 6 and find the three-digit code number for the manufacturer of your component. If more than one code number is listed, use the number listed first. 2 Press ✍ 3 ✍ 4 5 6 ✍ . The and FUNCTION button will flash when you press . Press or FUNCTION button to indicate the type of component you want to program with the remote control. You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 3. Use the 0 Press . 9 buttons to enter the three-digit manufacturer’s code number. To check if the code number works, aim the TV’s remote control at the component and press the green POWER button (VCR/DVD, SAT/CABLE) that corresponds with that component. If it responds, you are done. If not try using another code listed for that manufacturer. If you have problems programming your remote control, see “Troubleshooting” on page 42. 5 Remote Control Programming the Remote Control Remote Control 01US01COV-BR2.book Page 6 Thursday, March 25, 2004 4:23 PM Manufacturer’s Codes VCRs Philco 308, 309 DVD Players Philips 308, 309, 310 Manufacturer Code Pioneer 308 Sony 751 308, 309, 306 Hitachi 758 Manufacturer Code Quasar Sony 301, 302, 303 JVC 756 Admiral (M. Ward) 327 RCA/PROSCAN 304, 305, 308, 309, 311, 312, 313, 310, 329 Magnavox 757 Aiwa 338, 344 Realistic 309, 330, 328, 335, 324, 338 Mitsubishi 761 Onkyo 762 Sansui 314 Oritron 759 Samsung 322, 313, 321 Panasonic 753 Sanyo 330, 335 Philips 757 Scott 312, 313, 321, 335, 323, 324, 325, 326 Pioneer 752 327, 328 Audio Dynamic 314, 337 Broksonic 319, 317 Canon 309, 308 Citizen 332 Craig 302, 332 Criterion 315 Sharp Curtis Mathes 304, 338, 309 Shintom 315 Daewoo 341, 312, 309 338, 327 DBX 314, 336, 337 Signature 2000 (M. Ward) Dimensia 304 SV2000 338 Emerson 319, 320, 316, 317, 318, 341 Sylvania 308, 309, 338, 310 Symphonic 338 RCA 755 Samsung 758 Toshiba 754 Zenith 760 Cable Boxes Manufacturer Code Sony 230 Hamlin/Regal 222, 223, 224, 225, 226 Jerrold/G.I./ Motorola 201, 202, 203, 204, 205, 206, 207, 208, 218 Oak 227, 228, 229 Panasonic 219, 220, 221 211, 214, 215 Fisher 330, 335 Tashiro 332 Funai 338 Tatung 314, 336, 337 General Electric 329, 304, 309 Teac 314, 336, 338, 337 Go Video 322, 339, 340 Technics 309, 308 Goldstar 332 Toshiba 312, 311 Hitachi 306, 304, 305, 338 Wards 327, 328, 335, 331, 332 Yamaha 314, 330, 336, 337 Pioneer Zenith 331 Scientific Altanta 209, 210, 211 Instant Replay JC Penney JVC 309, 308 309, 305, 304, 330, 314, 336, 337 314, 336, 337, 345, 346, 347 Laserdisc Players Kenwood 314, 336, 332, 337 Manufacturer LXI (Sears) 332, 305, 330, 335, 338 Sony 701 Satellite Receivers Panasonic 704, 710 Manufacturer Code Pioneer 702 Sony 801 DIRECT TV 809 Magnavox 308, 309, 310 Tocom 216, 217 Zenith 212, 213 Code Marantz 314, 336, 337 Marta 332 Memorex 309, 335 DVD/VCR Combination Units Minolta 305, 304 Manufacturer Code Mitsubishi/ MGA 323, 324, 325, 326 General Electric 802 Sony 601 Hitachi 805 Multitech 325, 338, 321 Broksonic 605 Hughes 804 JVC 604 Mitsubishi 809 Panasonic 609 Panasonic 803 Samsung 603 RCA/PROSCAN 802, 808 Toshiba 602 Toshiba NEC Olympic 314, 336, 337 309, 308 Optimus 327 Panasonic 308, 309, 306, 307 Pentax 305, 304 6 Dish Network 810 Echostar 810 806, 807 01US01COV-BR2.book Page 7 Thursday, March 25, 2004 4:23 PM Operating a VCR Press Remote Control Using your TV Remote Control with Other Equipment To Activate the remote control to operate the VCR (FUNCTION button) Power on/off the VCR (VCR/DVD green button) or 0 9 , ENTER Change channels (using tuner) Play video tape Stop or Rewind or Fast-forward a video tape Pause and (Simultaneously) Record Switch between VCR and TV inputs Operating a DVD Player Press To Activate the remote control to operate the DVD (FUNCTION button) Power on/off the DVD (VCR/DVD green button) 0 9 , ENTER Select chapters Search chapters forward or backward Play DVD Stop Pause or Search the picture forward or backward during playback Display the DVD menu Use the arrow buttons to move the cursor in the menu, and the center button to select an option Switch between DVD and TV inputs 7 Remote Control 01US01COV-BR2.book Page 8 Thursday, March 25, 2004 4:23 PM Operating a Cable Box or Satellite Receiver Press To Activate the remote control to operate the cable box or satellite receiver (FUNCTION button) Power on/off the cable box or satellite receiver (SAT/CABLE green button) or 0 9 , ENTER (using tuner) Change channels Change back to previous channel Display channel number (satellite receiver) Display SAT Guide (satellite receiver) Display SAT Menu (satellite receiver) Use the arrow buttons to move the cursor in the menu, and the center button to select an option (satellite receiver) Press to switch between the TV and SAT inputs (satellite receiver) Operating a DVD/VCR Combination Unit Press To Activate the remote control to operate the DVD/VCR (FUNCTION button) Power on/off the DVD/VCR Combination unit (VCR/DVD green button) When the VCR is not playing, switches between the DVD player and VCR’s tuner Display the DVD Menu Play Stop Pause or Rewind or fast-forward a video tape (VCR) Search the picture forward or backward during playback (DVD) Use the arrow buttons to move the cursor in the menu, and the center button to select an option (DVD) and (Simultaneously) or 0 9 ,ENTER (using tuner) 8 Record (VCR) Change channels (VCR) 01US01COV-BR2.book Page 9 Thursday, March 25, 2004 4:23 PM Connecting Your TV Read this section before setting up your TV for the first time. This section explains how to make the basic connections and how to connect optional equipment. TV Rear Panel Connections 3 1 4 S VIDEO Y 1 PB AUDIO OUT (VAR/FIX) PR VIDEO L L (MONO) R 2 3 L (MONO) R 4 R 5 Jack Description 1 VHF/UHF This input connects to your VHF/UHF antenna or cable. 2 S VIDEO This input connects to the S VIDEO OUT jack on your VCR or other video equipment that has S VIDEO. S VIDEO provides better picture quality than the VHF/UHF jacks or the video input jack. S VIDEO does not provide sound, so you still must connect the audio cables. 3 VIDEO/AUDIO L(MONO), R This input connects to the AUDIO/VIDEO output jacks on your VCR or other video equipment. A third video input jack (VIDEO 2) is located on the front panel of the TV. These AUDIO/VIDEO input jacks provide better picture quality than the VHF/UHF jack. 4 Y, PB, PR/ L, R This input connects to the component video Y, PB, PR, and AUDIO L, R jacks on your DVD player or digital set-top box (480i only). 5 AUDIO OUT (VAR/FIX) L(MONO), R This jack connects to the AUDIO input jacks on your audio equipment. You can listen to your TV’s audio through your stereo system. 9 01US01COV-BR2.book Page 10 Thursday, March 25, 2004 4:23 PM Basic Connections TV with Cable, Indoor, or Outdoor Antenna Connections Depending on the cable system available in your home, choose one of the connections below: Use option A to connect the TV to a cable system or an antenna with a 75-ohm cable (usually built into newer homes). ✍ Converter EAC-25 is commercially known as a 300-to-75 ohm antenna adapter. Use option B to connect the TV to a dipole antenna, also known as a “rabbit ears antenna“ (usually found in older homes). ✍ 10 If you are connecting to an indoor or outdoor antenna, you may need to adjust the orientation of the antenna for the best reception. 01US01COV-BR2.book Page 11 Thursday, March 25, 2004 4:23 PM Connecting Additional Equipment Connecting a TV and VCR Rear of TV 3 1 4 S VIDEO Y PB 2 Connections AUDIO OUT (VAR/FIX) PR VIDEO VCR L R 1 L (MONO) L (MONO) R R LINE IN VIDEO AUDIO L AUDIO R LINE OUT Audio R (red) Audio L (white) Video (yellow) From cable/antenna Optional connection 1 Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR. 2 Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV. Optional connection ❏ ❏ If your VCR is equipped with video outputs, you can get better picture quality by connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV. For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound, so you still must connect the audio cables. Using your TV with this connection ❏ ❏ ❏ Program your Sony remote control to operate your VCR (see page 5). To activate your remote, press (FUNCTION button) to operate your VCR. In order to do this, first program your remote control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 31). Press repeatedly to switch between VCR input (VIDEO input) and VHF/UHF (local channels). 11 01US01COV-BR2.book Page 12 Thursday, March 25, 2004 4:23 PM TV and Cable Box Some cable TV systems use scrambled or encoded signals that require a cable box to view all channels. If you subscribe to such type of service, use this connection. Cable box 1 VIDEO AUDIO L AUDIO R LINE OUT Connections From cable/ antenna Rear of TV 3 1 4 S VIDEO Y 2 PB PR VIDEO L L (MONO) R 1 2 R Connect the coaxial cable from your cable service to the IN jack on your cable box. Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the VHF/UHF jack on your TV. Using your TV with this connection ❏ ❏ 12 Program your Sony remote control to operate your cable box (see page 5). To activate your remote, press (FUNCTION button) to operate your cable box. Then use 0 9 buttons or CH+/- buttons to change the channels. In order to do this, first program your remote control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 31). 01US01COV-BR2.book Page 13 Thursday, March 25, 2004 4:23 PM ✍ Remote Control Connecting a TV, VCR, and Cable Box DIGITAL CABLE BOX USERS: If you are connecting a digital cable box, you will need a special bidirectional splitter (5-900 Mhz mininum) that is designed to work with your digital cable box. Use this connection if you subscribe to a cable system that scrambles some channels (pay channels), but not all of them. This setup allows you to: ❏ ❏ change channels through your cable box or VCR when you are receiving a scrambled signal change channels through your TV Rear of TV 3 1 4 S VIDEO Y PB AUDIO OUT (VAR/FIX) PR VIDEO VCR L L (MONO) R L (MONO) R R LINE IN VIDEO AUDIO L AUDIO R LINE OUT 2b Video (yellow) Audio L (white) Audio R (red) 3 4 1 Splitter VIDEO AUDIO L AUDIO R Cable LINE OUT 2a Cable box 5 1 Connect the single input jack of the splitter (not supplied) to your incoming cable connection. 2 Using coaxial cables (not supplied), connect the two output jacks of the splitter (not supplied) to: a) the IN jack on your cable box b) the VHF/UHF jack on the TV 3 Using a coaxial cable (not supplied), connect the OUT jack on your cable box to the IN jack on your VCR. 4 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV. 13 01US01COV-BR2.book Page 14 Thursday, March 25, 2004 4:23 PM 5 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your cable box to AUDIO/VIDEO IN on your TV. Optional connection ❏ For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound, so you still must connect the audio cables. Using your TV with this connection Connections ❏ ❏ ❏ 14 Program your Sony remote control to operate your VCR or cable box (see page 5). To activate your remote, press (FUNCTION button) to operate your VCR or (FUNCTION button) to operate your cable box. In order to do this, first program your remote control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 31). Press repeatedly to switch between VCR input (VIDEO input), VHF/UHF (local channels or unscrambled), or cable box (cable system or scrambled channels). 01US01COV-BR2.book Page 15 Thursday, March 25, 2004 4:23 PM Connecting a TV and Satellite Receiver From cable/ antenna 2 Rear of TV 3 1 4 S VIDEO Y PB AUDIO OUT (VAR/FIX) Satellite receiver VIDEO L VIDEO 1 Y VIDEO 2 VIDEO 2 VIDEO 1 L L R R L (MONO) R PB Satellite antenna cable Connections 1 PR L (MONO) R R PR 3 Audio R (red) Audio L (white) Video (yellow) 1 2 Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver. 3 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite receiver to AUDIO/VIDEO IN on your TV. Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on your TV. Using your TV with this connection ❏ ❏ ❏ Program your Sony remote control to operate your satellite receiver (see page 5). To activate your remote, press (FUNCTION button) to operate your satellite receiver. See page 7 on how to operate other functions. Press repeatedly to switch to satellite receiver input (VIDEO input). 15 01US01COV-BR2.book Page 16 Thursday, March 25, 2004 4:23 PM Connecting a TV, VCR, Cable/Antenna, and Satellite Receiver using Composite Video (VIDEO/AUDIO L(MONO), R) From cable or Satellite antenna antenna cable 2 Optional Rear of TV Splitter 1 3 1 4 S VIDEO Y 3a 3b For Viewing AUDIO OUT (VAR/FIX) PR Satellite receiver Connections PB VIDEO L Y VIDEO 1 VIDEO 2 L (MONO) VIDEO 2 VIDEO 1 R L (MONO) R R PB L L R R PR Video (yellow) Audio L (white) Audio R (red) 4 For Recording LINE IN VIDEO AUDIO L AUDIO R LINE OUT 6 For Viewing VCR 5 For Playback 1 2 Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver. 3 Using coaxial cables (not supplied), connect the two output jacks of the splitter (not supplied) to: a) the IN jack on your satellite receiver b) the VHF/UHF jack on the TV 4 Using a coaxial cable (not supplied), connect the OUT jack on your satellite receiver to the VHF/UHF IN on your VCR. 5 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV. 6 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite receiver to AUDIO/VIDEO IN on your TV. 16 Connect the single input jack of the splitter (not supplied) to your incoming cable/antenna (optional connection to view local channels or broadcast). 01US01COV-BR2.book Page 17 Thursday, March 25, 2004 4:23 PM Using your TV with this connection ❏ ❏ ❏ Program your Sony remote control to operate your VCR or satellite receiver (see page 5). To activate your remote, press (FUNCTION button) to operate your VCR or (FUNCTION button) to operate your satellite receiver. Press repeatedly to switch between VCR input (VIDEO input), VHF/UHF (local channels or unscrambled), or your cable box (cable system or scrambled channels). Connections 17 01US01COV-BR2.book Page 18 Thursday, March 25, 2004 4:23 PM Connecting a TV, VCR, and Satellite Receiver using Component Video (Y, PB, PR) Rear of TV 4 Connections 1 From 2 cable/ VIDEO VCR L 3 R L L (MONO) (MONO) R R VIDEO AUDIO L AUDIO R L L R R Video (yellow) Audio L (white) Audio R (red) PR 6 PB AUDIO OUT (VAR/FIX) LINE OUT PB Y (green) PB (blue) PR (red) Y PR LINE IN VIDEO 1 4 antenna Satellite Receiver Y 3 1 S VIDEO 7 Audio R (red) Audio L (white) 5 1 Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite receiver. 2 3 Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR. 4 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite receiver to AUDIO/VIDEO IN on your VCR. 5 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV. 6 Using component video cables (not supplied), connect Y, PB, PR OUT on your satellite receiver to Y, PB, PR IN on your TV. 7 Connect AUDIO OUT on your satellite receiver to AUDIO IN on your TV. Using a coaxial cables (not supplied), connect the OUT jack on your VCR to the VHF/UHF jack on your TV. Using your TV with this connection ❏ ❏ ❏ ❏ 18 Program your Sony remote control to operate your VCR or satellite receiver (see page 5). Turn on your VCR to enable your satellite receiver to work with this connection. To activate your remote, press (FUNCTION button) to operate your VCR or (FUNCTION button) to operate your satellite receiver. Press repeatedly to switch between VCR input (VIDEO input), VHF/UHF (local channels or unscrambled), or your cable box (cable system or scrambled channels). 01US01COV-BR2.book Page 19 Thursday, March 25, 2004 4:23 PM Connecting a DVD Player using Composite Video (VIDEO/AUDIO L(MONO),R) Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your DVD player to AUDIO/VIDEO IN on your TV. Rear of TV Rear of DVD Player 3 1 4 S VIDEO Y PB AUDIO OUT (VAR/FIX) PR VIDEO L L L (MONO) R R Audio R (red) Audio L (white) Video (yellow) Optional connection ❏ For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound, so you still must connect the audio cables. Connecting a DVD Player using Component Video (Y, PB, PR/R, L) If your DVD player is equipped with component video outputs (Y, PB, PR), you can improve the picture quality by using component video cables (480i only). Rear of TV Rear of DVD Player 3 1 4 S VIDEO Y PB AUDIO OUT (VAR/FIX) PR VIDEO L L (MONO) R PR (red) PB (blue) Y (green) 2 L (MONO) R R Audio L (white) Audio R (red) 1 1 Make sure your DVD player is set up (See page 41). Using component video cables (not supplied), connect Y, PB, PR OUT on your DVD player to Y, PB, PR IN on your TV. 2 Connect AUDIO OUT on your DVD player to AUDIO IN on your TV. ✍ The Y, PB, PR outputs on your DVD player are sometimes labeled Y, CB, and CR or Y, B-Y, and R-Y. If so, connect the cables to like colors. Using your TV with this connection ❏ ❏ ❏ Program your Sony remote control to operate your DVD (see page 5). To activate your remote, press (FUNCTION button) to operate your DVD. Press repeatedly to switch to the DVD player's input (VIDEO input). 19 Connections Optional connection (MONO) R 01US01COV-BR2.book Page 20 Thursday, March 25, 2004 4:23 PM Connecting an Audio System ✍ 1 2 Connections 3 If you are connecting a Home Theater, please refer to your Home Theater manual for additional connections. Using audio/video cables (not supplied), connect AUDIO OUT on your TV to one of the unused line inputs (e.g. TV, AUX, TAPE2) on your stereo. Set the Speaker option to Off. For more instructions, see "Using the Audio Menu" on page 29. After you connect the audio system, you can control the volume level from your TV or audio system. ❏ ❏ To control the volume from the TV, use the front panel controls or the VOL +/buttons on the remote. To control the volume through the connected audio system, open the Audio Out option on the Audio Menu and select Fixed. For more instructions, see "Using the Audio Menu" on page 29. Rear of TV 3 1 4 S VIDEO Y PB AUDIO OUT (VAR/FIX) PR VIDEO L L (MONO) R AUDIO-L (white) L (MONO) R R AUDIO-R (red) Line input Connecting a Camcorder (for playback) To connect your camcorder, you can use the Audio/Video inputs on either the front or rear panel of the TV. Using the audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your camcorder to AUDIO/VIDEO IN on your TV. Front A/V Panel 4-089-016 A/V output 20 >PC< Audio R (red) Audio L (white) Video (yellow) 01US01COV-BR2.book Page 21 Thursday, March 25, 2004 4:23 PM Connecting for Video Tape Editing (VCR and Camcorder) Camcorder (for playback) 1b Rear of TV or 3 1 4 S VIDEO Y 1a PB AUDIO OUT (VAR/FIX) PR VIDEO L LINE IN R LINE IN VIDEO AUDIO L AUDIO R LINE OUT L (MONO) VCR (for playback) VIDEO AUDIO L AUDIO R LINE OUT VCR (for recording) L (MONO) R R Video (yellow) Audio L (white) Audio R (red) 2 1 For video tape editing, connect the VCR to the following sources: ❏ ❏ 2 If you are connecting a VCR, use audio/video cables (not supplied) to connect AUDIO/VIDEO OUT on your first VCR to AUDIO/VIDEO IN on your second VCR (option 1a). If you are connecting a camcorder, use audio/video cables (not supplied) to connect AUDIO/VIDEO OUT on your camcorder to AUDIO/VIDEO IN on your VCR (option 1b). Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on the second VCR to AUDIO/VIDEO IN on your TV. Using your TV with this connection ❏ ❏ Program your Sony remote control to operate your VCR (see page 5). To activate your remote, press (FUNCTION button) to operate your VCR. See page 7 for instruction on how to operate other functions. 21 Connections A/V output 01US01COV-BR2.book Page 22 Thursday, March 25, 2004 4:23 PM 01US01COV-BR2.book Page 23 Thursday, March 25, 2004 4:23 PM Using Basic Functions Setting Up the TV After you have finished connecting your TV, you can use Auto Program to set up your channels. During Auto Program, the TV will automatically search for available channels and program receivable channels. ✍ 1 When you start Auto Program wait until it is finished; otherwise it will skip over channels that are available. Perform Auto Program again to program receivable channels. Press to turn on the TV. The Initial Setup screen appears. Auto Program [CH+] [CH–] Exit 2 ✍ Press on the remote control or on the TV front panel to start Auto Program, or press to exit. The Initial Setup screen appears each time you turn on the TV until you perform Auto Program. To perform Auto Program again 1 2 3 4 Press 5 6 Press f to highlight Auto Program. Press . Press g to highlight Channel Menu. Press f to highlight Cable. Press to select. Press F or f to highlight On or Off according to how you connected your TV. Press select. After Auto Program finishes, press to to search for channels. to exit. To reset the TV to factory settings 1 2 3 Turn the TV on. 4 Release Hold down on the remote control. Press and release the POWER button on the TV front panel. The TV will turn itself off, then back on. . 23 Basic Functions Initial Setup First please connect cable/antenna 01US01COV-BR2.book Page 24 Thursday, March 25, 2004 4:23 PM Quick Start to the Menus The following settings are available in your on-screen menus. For more details on how to use the menus, see “Using the Menus” on page 27. Menu Allows you to Video Mode:Vivid Picture Brightness Color Hue Sharpness Col o r Temp:Cool ClearEdge VM:High Basic Functions Move Select End Adjust your picture settings. End Change your audio settings. End Customize your channel settings. End Set rating limits on your TV based on program rating or content. Audio Treble Bass Balance Steady Sound:Off Effect:Off MTS:Stereo Speaker:On Audio Out:Fixed Move Select Channel Setup Favorite Channels Cable:On Channel Fix:Off Auto Program Channel Skip/Add Channel Label Move Select Parental Control Password: Move 24 Select 01US01COV-BR2.book Page 25 Thursday, March 25, 2004 4:23 PM Menu Allows you to Timer Timer 1:Set Timer 2:Set Current Time Move Select End Set the clock on your TV and program scheduled viewing using Timer 1 and Timer 2. End Select closed captioning options (Caption Vision), display the name of the current program and its remaining time (Info Banner), label video inputs, adjust tilt correction, enhance DVD picture resolution (16:9 Enhanced), or select menu language. Setup Move Select Basic Functions Caption Vision:Off Info Banner:Off Video Label Tilt Correction Language:English 16:9 Enhanced:Off 25 01US01COV-BR2.book Page 26 Thursday, March 25, 2004 4:23 PM 01US01COV-BR2.book Page 27 Thursday, March 25, 2004 4:23 PM Using the Menus This section shows the options available for setting up and adjusting the TV. Using the Remote Control to Navigate the On-Screen Menus Move Select To navigate on the on-screen menus, use the arrow buttons (F , f , G , g) to move the cursor. Pressing these arrows will cause the cursor to move in the corresponding direction. Press the ) to select an option. center button ( How to Access Menus To Access Menus Press 6 Press ✍ to display the on-screen menu. Use the G or g buttons to highlight the desired menu icon. Press Menus 1 2 3 4 5 to select it. Use the F or f buttons to scroll up and down through the features. Follow the instructions on the screen. For instructions on using a specific menu, see the page in this section that talks about that menu. to exit the menu. Press once to display the on-screen menu, and press again to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 90 seconds. 27 01US01COV-BR2.book Page 28 Thursday, March 25, 2004 4:23 PM Using the Video Menu To access the Video menu, use the following steps: To Display To Select Press f to highlight an option, then press . Video Mode:Vivid Picture Brightness Color Hue Sharpness Col o r Temp:Cool ClearEdge VM:High Move Mode Customized picture viewing Menus ✍ Press Select End Use the F or f buttons to highlight one of the following options, then press to select it. Vivid: Select for enhanced picture contrast and sharpness. Standard: Select for a standard picture. Movie: Select for a finely detailed picture. Pro: Select for natural picture and sharpness. on the remote control for direct access to the picture modes (Vivid, Standard, Movie, Pro). Picture Press G to decrease the contrast. Press g to increase the contrast. Brightness Press G to darken the picture. Press g to brighten the picture. Color Press G to decrease color saturation. Press g to increase color saturation. Hue Press G to increase the red tones. Press g to increase the green tones. Sharpness Press G to soften the picture. Press g to sharpen the picture. Color Temp. White tint adjustment Use the F or f buttons to highlight one of the following options, then press to select it. Cool: Gives white colors a blue tint. Neutral: Gives white colors a neutral tint. Warm: Gives white colors a red tint. ClearEdge VM Sharpens picture definition to give objects a crisp, clean edge. Use the F to select it. or f buttons to highlight: High, Low, or Off, then press 28 01US01COV-BR2.book Page 29 Thursday, March 25, 2004 4:23 PM Using the Audio Menu To access the Audio menu, use the following steps: To Display To Highlight To Select Audio Treble Bass Balance Steady Sound:Off Effect:Off MTS:Stereo Press f to highlight an option, then press . Speaker:On Audio Out:Fixed Move Select End Treble Press G to decrease the higher pitched sounds. Press g to increase the higher pitched sounds. Bass Press G to decrease the lower pitched sounds. Press g to increase the lower pitched sounds. Balance Press G to emphasize the left speaker. Press g to emphasize the right speaker. Steady Sound Use the F or f buttons to highlight one of the following options, then Stabilizes volume press to select it. On: Select to stabilize the volume when changing channels. Off: Select to turn Steady Sound off. Effect Press MTS Multi-Channel TV Sound ✍ ✍ Press Menus ✍ Use the F or f buttons to highlight one of the following options, then to select it. press Simulated: Simulates theater-quality sound for mono programs. SRS: Produces a dynamic three-dimensional sound for stereo programs. Off: Normal stereo or mono reception. to directly select Effect settings (Simulated, SRS, Off). Use the F or f buttons to highlight one of the following options, then press to select it. Stereo: Select when viewing a broadcast in stereo. Auto SAP: Select to have the TV automatically switch to a Second Audio Program (SAP) when a signal is received. Mono: Select to reduce noise in areas of poor reception. to directly select MTS settings (Stereo, Auto SAP, Mono). If your TV is set to Auto SAP, some programs may be muted or distorted. If your TV does not output sound, change your Audio MTS setting to Stereo or Mono. 29 01US01COV-BR2.book Page 30 Thursday, March 25, 2004 4:23 PM Speaker Use the F or f buttons to highlight one of the following options, then press Custom selection to select it. of audio output On: Select to listen to the sound from the TV speakers with or source without a separate stereo system. Off: Select to turn off the TV speakers and listen to the TV’s sound only through external audio system speakers. Audio Out Use to control the TV’s volume through a stereo Menus ✍ 30 Use the F or f buttons to highlight one of the following options, then to select it. press Variable: Adjust the volume through your TV. Fixed: Adjust the volume through a connected stereo. You can only set Audio Out settings when you have set Speaker to Off. 01US01COV-BR2.book Page 31 Thursday, March 25, 2004 4:23 PM Using the Channel Setup Menu To access the Channel Setup menu, use the following steps: To Display To Highlight To Select Channel Setup Favorite Channels Cable:On Channel Fix:Off Auto Program Channel Skip/Add Channel Label Press f to highlight an option, then press Favorite Channels Quick access to favorite channels 1 2 3 4 ✍ Select End . Press F or f to move the cursor to the Use the F or f buttons to highlight one of the following options, then press to select it. Select if you are receiving cable channels with a CATV cable. Select if you are using a TV antenna. After changing your cable settings, you will need to perform Auto Program. See “To perform Auto Program again” on page 23. Channel Fix Use the F or f buttons to highlight one of the following options, then press to select it. Off: Channel Fix is not set. 2-6: Select when you want to control all channel selection through a cable box or VCR. Select the appropriate channel (usually 3 or 4) and use the cable box’s or VCR’s remote control for channel selection. Video 1: Select from available video inputs when you have connected video equipment (e.g., a satellite receiver) and you want your TV fixed to it. You cannot use Favorite Channels, Cable, Channel Skip/Add, or Channel Label when Channel Fix is set. 31 Menus On: Off: ✍ Move Use the F or f buttons to highlight the position (1-5) where you want to set a favorite channel, then press . Use the F or f buttons to find the channel you want to add to your favorite channels. Press to select the channel. The TV will automatically change to the selected channel and assign it to the selected position (1-5). to exit. Press G to return to the Channel Setup menu or press To use Favorite Channels, exit all menus and press desired channel number and press . Cable ✍ . 01US01COV-BR2.book Page 32 Thursday, March 25, 2004 4:23 PM Auto Program Perform Auto Program whenever setting up your TV. Auto Program will search for available channels and program receivable channels. Channel Skip/Add Use this feature after you run Auto Program to skip unwanted channels or add new ones. 1 Use the F or f buttons to highlight the position of the desired channel, then press . . 2 Use the F or f buttons to highlight Skip or Add, then press 3 ✍ Menus to exit. Press CH + or CH - to skip over channels that have been skipped. You can still use the --9 buttons to directly tune to skipped channels. Channel Label Label up to 40 channels with their call letters 32 Press G to return to the Channel Setup menu or press 1 Press , then use the F or f buttons until you reach the desired channel number. 2 Press 3 Press f to highlight Label, then press . Use the F or f buttons to display the first call letter or number of the label. Press to select. Repeat this process until you finish selecting all the call letters. 4 When finished, press 5 Press G to return to the Channel Setup menu or press to activate the channel. to activate. to exit. 01US01COV-BR2.book Page 33 Thursday, March 25, 2004 4:23 PM Using the Parental Control Menu To access the Parental Control menu, use the following steps: To Display To Highlight To Select Parental Control Password: Use [0-9] buttons to enter new password Move Select End The Parental Control feature helps parents monitor what their children watch on television. To use the Parental Control Menu When you select the Parental Control menu, you are prompted to set a 4-digit password. You cannot access the Parent menu settings without this password. 1 2 ✍ Use the 0 9 buttons to enter a 4-digit password. Confirm your password by entering it again. Keep this manual in a safe place. You need your password for any future access to the Parental Control menu. If you forget your password, see page 41. Menus 33 01US01COV-BR2.book Page 34 Thursday, March 25, 2004 4:23 PM Parental Control Setting the Rating You can change the Rating by selecting one of the Parental Lock options. Parental Control Lock:Off Change Password Country:U.S.A. Move 1 With Lock highlighted, press Select End . If you are not familiar with Parental Guideline rating system, use one of the following preset categories to simplify the rating selection: Child, Youth, Young Adult. Menus 2 Use the F or f to highlight the desired rating and press . Rating TV will allow a maximum rating of Off No rating limit Child TV-Y, TV-G , G (U.S.), G , C (Canada) Youth TV-PG , PG (U.S.), 8 ans + (Canada) Young Adult TV-14, PG-13 (U.S.), 14+ (Canada) Custom Select to set more restrictive ratings (see next section) Changing your Password 1 Use the F or f buttons to highlight Change Password and press 2 . Follow steps 1 and 2 for “Using the Parental Control Menu” on page 33. Select a Country Select U.S.A. to use US ratings (see pages 36-37) or select Canada to use Canadian ratings (see page 38). If you select a Country (U.S. or Canada) that is not where you live, the rating you select will not be activated. 1 2 34 Press f to highlight Country, then press . Use the F or f to highlight the desired country and press . 01US01COV-BR2.book Page 35 Thursday, March 25, 2004 4:23 PM Information for Parents To view a program that exceeds the TV rating ❏ ✍ Press , then use the 0 9 buttons to enter your password. Entering your password to view a blocked program will temporarily turn Lock to Off. To reactivate your Lock settings, turn the TV off then back on; the TV will return to the settings that you have selected. Using the Custom Menu Follow the instructions on the screen to make your custom settings. Select the country desired for your TV’s rating limit. For more information see page 36 for (U.S. models) and page 38 for (Canadian models). ✍ Once you have blocked a rating or content, all higher ratings or content will be automatically blocked. Menus 35 01US01COV-BR2.book Page 36 Thursday, March 25, 2004 4:23 PM United States: Selecting Custom Rating Options For the United States, the Custom Rating menu includes the following options: Movie Rating, TV Rating, and Unrated. (For Canada, see page 38.) Movie Rating This system defines the rating levels of movies shown in theaters and on prime cable channels. Rating Defined as Movie Rating G General audience PG Parental guidance suggested PG-13 Parents strongly cautioned R Restricted NC-17 No one 17 and under admitted G: PG: PG-13: R: NC-17: X: Adult audience only X Press to block Return Select End TV Rating The TV rating is divided into two groups: age-based and content-based. TV Rating Menus Age TV-Y: TV-Y7: TV-G: TV-PG: TV-14: TV-MA: FV L L L D D Press to block Return Select S S S V V V Content End Age Defined as Content Defined as TV-Y All children FV Fantasy violence TV-Y7 Directed to older children D Suggestive dialogue TV-G General audience L Strong language TV-PG Parental guidance suggested S Sexual situations V Violence TV-14 Parents strongly cautioned TV-MA Mature audience only ✍ 36 The content ratings will increase depending on the level of the age-based rating. For example, a program with a TV-PG V (Violence) rating may contain moderate violence, while a TV-14 V (Violence) rating may contain intense violence. 01US01COV-BR2.book Page 37 Thursday, March 25, 2004 4:23 PM Unrated You have the option of blocking TV programs or movies that are not rated. Allow Allows all unrated programs Block Blocks all unrated programs Custom Rating Movie Rating TV Rating Unrated: Allow Return ✍ Select End If you choose to block unrated TV programs, please be aware that the following programs may be blocked: emergency broadcasts, political programs, pro, news, public service announcements, religious programs, and weather. Menus 37 01US01COV-BR2.book Page 38 Thursday, March 25, 2004 4:23 PM Canada: Selecting Custom Rating Options For Canada, the Custom Rating menu includes the following options: English Rating, French Rating, and U.S.A. Rating. English Rating These ratings are for Canadian programs that are broadcast in English. Rating Defined as C Children C8+ Children 8 years and older G General programming PG Parental guidance 14+ Viewers 14 and older Press 18+ Adult programming Return English Rating C: C8+: G: PG: 14+: 18+: to block Select End French Rating Menus These ratings are for Canadian programs that are broadcast in French. Rating Defined as G General 8 ans+ Not recommended for younger children 13 ans+ Not recommended for children under age 13 16 ans+ Not recommended for ages under 16 18 ans+ This program is restricted to adults French Rating G: 8 ans+: 13 ans+: 16 ans+: 18 ans+: Press to block Return U.S.A. Rating For programs from the United States, see “TV Rating” on page 36. 38 Select End 01US01COV-BR2.book Page 39 Thursday, March 25, 2004 4:23 PM Using the Timer Menu To access the Timer menu, use the following steps: To Display To Highlight To Select Timer Timer 1:Set Timer 2:Set Current Time Move Current Time to exit the menu. Use the timers to program your TV to turn on and off by day, time, duration, and channel. The timer duration is a maximum of six hours. When the channel is fixed, it is not necessary to set the channel. 1 Use the F or f buttons to highlight Timer 1 or Timer 2, then press . 2 Use the F or f buttons to enter the desired day, start time, duration, and channel, then press . The timer status should be On when the Timer has been set, and the timer light on the front panel of the TV should be on. 3 Press to exit the menu. Menus ✍ Press You must set the Current Time before you can use Timer 1 or Timer 2. Timer 1 and Timer 2 Scheduled viewing ✍ End Set your TV to the current day and time. Press to open the Current Time menu: 1 Use the F or f buttons to enter the correct day and time, then press . 2 ✍ Select Select Off to turn off the Timer. Your previous settings will be saved. When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of any loss of power, Current Time, Timer 1, and Timer 2 settings will be cleared. 39 01US01COV-BR2.book Page 40 Thursday, March 25, 2004 4:23 PM Using the Setup Menu To access the Setup menu, use the following steps: To Display To Highlight To Select Setup Caption Vision:Off Info Banner:Off Video Label Tilt Correction Language:English 16:9 Enhanced:Off Press f to highlight an option, then press . Menus Move Select End Caption Vision ClosedCaptioning Allows you to select from three closed-caption modes for programs that are broadcast with closed captioning. Use the F or f buttons to highlight one of the following options, then press to select it. Off: Caption Vision is not activated. CC1, 2, 3, 4: Displays printed dialogue and sound effects of a program. Text1, 2, 3, 4: Displays network/station information. Info Banner Displays the name of the current program and its remaining time (if available) when you change the channel or press the DISPLAY button. Use . the F or f buttons to highlight On or Off. Then press Video Label Label connected equipment Allows you to identify the video components connected to the TV: VCR, DVD, etc. When you press TV/VIDEO to switch inputs, the Video Label appears on-screen. 1 2 3 Press the F or f buttons to highlight the input you want to label and press . . Press the F or f buttons to highlight a label and press to exit. Press G to return to the Setup menu or press Tilt Correction Use the F or f buttons to set the tilt of the picture from –5 to +5, then press to activate. Language Display all menus in the language of your choice. Use the F or f buttons to select from one of the following options: English, Español (Spanish) and Français (French). Then press . 16:9 Enhanced Provides enhanced picture resolution for wide-screen sources such as DVD. This is only available when the TV is in Video mode. 40 01US01COV-BR2.book Page 41 Thursday, March 25, 2004 4:23 PM Other Information Troubleshooting If you have a problem with your TV, try the suggestions below. If the problem persists, see “Contacting Sony” at the end of this section. General Problem Possible Remedies I want to reset the TV ❏ to the factory settings Turn on the TV. While holding down the RESET button on the remote control, press the POWER button on the TV front panel. The TV will turn itself off, then back on again. Release the RESET button. ❏ Clean the TV with a soft dry cloth. Never use strong solvents such as thinner or benzine, which might damage the finish of the cabinet. I lost the parental control password ❏ In the password screen, enter the following master password: 4357. After using the master password, you must create a new password. You cannot use the master to unlock currently blocked channels. There is a black box on the screen ❏ You have selected a text option in the Setup menu (page 40) and no text is available. To turn off this feature, select Off in the Caption Vision option. If you were trying to select closed captioning, select CC1-4 instead of Text1-4. There was a blackout ❏ or power outage, and now the TV won't turn on and the timer LED is flashing Press the POWER button on your remote control or on the TV front panel. If the problem persists, see “Contacting Sony“ at the end of this section. The digital cable box does not work ❏ If you are connecting a VCR and digital cable box using a splitter, as described in page 13, you must use a special bidirectional splitter (5-900Mhz mininum) that is designed to work with your digital cable box. I can’t connect the DVD player using component video outputs (Y, PB, PR) ❏ You must set up your DVD player before you can connect it using component video outputs (Y, PB, PR). Disconnect the DVD player and set it up, referring to the DVD manual for instructions. Then, connect it to the TV again following the instructions in “Connecting a DVD Player using Component Video“ on page 19. 41 Other Information The TV is dirty 01US01COV-BR2.book Page 42 Thursday, March 25, 2004 4:23 PM Remote Control Problem Possible Remedies I cannot operate the remote control ❏ ❏ ❏ ❏ Press TV (FUNCTION) when operating your TV. Check the orientation of the batteries. Batteries could be weak. Replace them (page 2). Move the TV three to four feet away from fluorescent lights. I cannot change channels with the remote control ❏ Make sure you have not inadvertently switched your TV from the channel 3 or 4 setting if you are using another device to change channels. If you are using another device to control channels, be sure that you have pressed the FUNCTION button for that device. For example, if you are using your VCR to control channels, be sure to press the VCR/DVD FUNCTION button (page 4). ❏ I lost the remote control ❏ You can use the front panel controls to access your menus, change channels, adjust the volume, or change video inputs (page 2). Contact your nearest Sony Dealer to order a replacement. To find out the nearest dealer, please call our Sony Direct Accessory and Part Center at 1-800-488-7669 (U.S. residents only). Other Information Programming The Remote Control Problem Possible Remedies More than one code is listed ❏ Try entering them one by one until you come to the correct code for your component. I entered the wrong code number ❏ If you enter a new code number, the code number you previously entered at that setting is erased. To reenter the correct code number you must reprogram the remote control (page 5). I cannot operate a component with the remote control ❏ Use the component's own remote control. When I changed the batteries, the code numbers changed back to the factory settings ❏ Reprogram the remote control (page 5). 42 01US01COV-BR2.book Page 43 Thursday, March 25, 2004 4:23 PM Video Problem Possible Remedies No picture, no sound ❏ ❏ ❏ Make sure the power cord is plugged in. If a red light flashes on the front of your TV for more than a few minutes, disconnect and reconnect the power cord. If the problem continues, call your local service center. Check the TV/VIDEO setting. When watching TV, set it to TV; when watching video equipment, set it to VIDEO 1, 2, 3 or 4 (page 4). Make sure you have inserted the batteries correctly into the remote control (page 2). Try another channel to rule out station trouble. Poor or no picture, good sound ❏ ❏ ❏ Adjust the Picture setting in the Video menu (page 28). Adjust the Brightness setting in the Video menu (page 28). Check the antenna and/or cable connections (page 10). No color ❏ Adjust the Color setting in the Video menu (page 28). Snow on the screen ❏ ❏ ❏ Check the Cable setting in the Channel menu (page 31). Check the antenna and/or cable connections (page 10). Make sure the channel selected is currently broadcasting. Dotted lines or stripes ❏ ❏ Adjust the antenna. Move the TV away from other electronic equipment. Some electronic equipment creates electrical noise, which can interfere with TV reception. Double images or ghosts ❏ Check your outdoor antenna or call your cable service. ❏ ❏ Audio Possible Remedies Good picture, no sound ❏ ❏ ❏ ❏ Low or no audio (TV and cable box) ❏ Press so that Muting disappears from the screen (page 3). Check your Audio settings. Your TV may be set to Auto SAP in the MTS feature (page 29). Make sure the speaker option is set to On in the Audio Menu. Press to adjust your TV's volume. Some cable boxes have volume level controls. Check and see if your cable box remote has a volume control. 43 Other Information Problem 01US01COV-BR2.book Page 44 Thursday, March 25, 2004 4:23 PM Channels Problem Possible Remedies ❏ I cannot receive ❏ higher number channels (UHF) when using an antenna Make sure Cable is set to Off in the Channel menu (page 31). Perform Auto Program to add channels that are not presently in the memory (page 23). ❏ ❏ Make sure Cable is set to On in the Channel menu (page 31). Perform Auto Program to add channels that are not presently in the memory (page 23). Cable stations don’t seem to work Contacting Sony Before calling our Customer Information Services Center, reset the TV to factory settings (see page 23). Please have your TV serial number ready. The number is located on the rear of your TV and on the front cover of this manual. Other Information Our Customer Information Services Center phone number is 1-800-222-SONY (7669) (US residents only) or 1-877-899 SONY (7669) (Canadian residents only). 44 01US01COV-BR2.book Page 45 Thursday, March 25, 2004 4:23 PM Specifications For all models (except as noted) Television system Channel coverage Antenna Picture tube Power requirements Supplied accessories Inputs/outputs Optional accessories American TV standard/NTSC VHF: 2-13/UHF: 14-69/CATV: 1-125 75-ohm external antenna terminal for VHF/UHF FD Trinitron® tube 120V, 60 Hz Size AA (R6) batteries (2) Remote Control RM-Y195 (1) Inputs 1 video, 1 audio (front) Outputs 2 video, 2 audio (rear) 1 S VIDEO 1 RF 1 Y, PB, PR, 1 audio TV Stand: SU-32FS2 for KV-32FS120 SU-36FS2 for KV-36FS120 1 AUDIO OUT KV-32FS120 Screen size Speaker output Power consumption Dimensions (W/H/D) Mass Visible screen size: 803 mm (32 inches) measured diagonally Actual screen size: 863.6 mm (34 inches) measured diagonally 10 W x 2 175 W Less than 1 W in standby 898 x 696 x 576 mm (35 3/8 x 27 3/8 x 22 5/8 inches) 75 kg (165 lbs. 6 oz.) KV-36FS120 Screen size Speaker output Power consumption Dimensions (W/H/D) Mass Visible screen size: 911 mm (36 inches) measured diagonally Actual screen size: 965.2 mm (38 inches) measured diagonally 10 W x 2 180 W Less than 1 W in standby 985 x 774 x 633 mm (38 3/4 x 30 1/2 x 24 7/8 inches) 98.4 kg (216 lbs. 15 oz.) Design and specifications are subject to change without notice. Other Information 45 01US01COV-BR2.book Page 46 Thursday, March 25, 2004 4:23 PM 01US01COV-BR2.book Page 47 Thursday, March 25, 2004 4:23 PM Index 16:9 Enhanced 40 I Audio Out 30 Auto Program 23, 32 Auto SAP 29 L A Info Banner 40 B Language 40 M Manufacturer’s Codes 6 Menus Audio 29 Channel Setup 31 Parental Control 33 Setup 40 Timer 39 Video 28 Mode Movie 28 Pro 28 Standard 28 Vivid 28 MTS Auto SAP 29 Mono 29 Stereo 29 Batteries Inserting in remote 2 Balance 29 Bass 29 Brightness 28 C Cable 31 Caption Vision 40 Channel Fix 31 Channel Label 32 Channel Skip/Add 32 ClearEdge VM 28 Color 28 Color Temperature 28 Connections Cable and antenna 10 Cable Box and Cable 12 Connecting a Camcorder 20 Connecting an Audio System 20 DVD Player using Component Video (Y, PB, PR/L, R) 19 DVD Player using Composite Video (VIDEO/AUDIO L(MONO),R) 19 TV and Cable Box 12 TV and Satellite Receiver 15 TV and VCR 11 TV, VCR and Cable Box 13 TV, VCR, and Satellite Receiver using Component Video (Y, PB, PR/L, R) 18 TV, VCR, Cable/Antenna, and Satellite Receiver using Composite Video (VIDEO/AUDIO L(MONO), R) 16 VideoTape Editing (VCR or Camcorder) 21 Current Time 39 D DISPLAY 4 P Parental Control 34 Picture 28 Programming the Remote Control 42 R Remote Control Programming 5 S Setting the Rating English Rating 38 French Rating 38 Movie Rating 36 TV Rating 36 U.S.A. Rating 38 Unrated 37 Sharpness 28 SLEEP 3 Speaker 30 Specifications 45 Steady Sound 29 T Tilt Correction 40 Timer 1 and Timer 2 39 Treble 29 Troubleshooting 41 TV Features 1 TV Front Panel 2 TV Rear Panel 9 E Effect Off 29 Simulated 29 SRS 29 F Hue 28 V Video Label 40 H Favorite Channels 31 47 01US01COV-BR2.book Page 48 Thursday, March 25, 2004 4:23 PM User Guide Sony Corporation Printed in U.S.A.
Similar documents
service manual
WARNING (UK Models only) The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 AMP rating. Should the fuse need to be replaced, use a 13AMP FUSE approved by AS...
More informationSTR-V333ES/V444ES
10 kHz y 9 kHz. After tuning in any AM station, turn off the receiver. Hold down the TUNING + button and press the ?/1 button. All pr eset stations will be erased when you change the tuning scale. ...
More informationour electronic Catalog - AAA Supply House Ltd.
State your name and business name Catalogue code - very important Quantity desired Size and colour, if applicable Name of the item Method of payment Visa, Mastercard or COD Preferred method of ship...
More informationKD-LHX551, KD-LHX552 KD
Playable Audio Format for SD Card MP3/WMA GENERAL Power Requirement Operating Voltage DC 14.4 V (11 V to 16 V allowance) Grounding System Negative ground Allowable Operating Temperature 0°C to +40°...
More information