custom add-ons for english units

Transcription

CUSTOM ADD-ONS FOR ENGLISH UNITS
Spindles
Flange
Piloted Slot
Jacobs Taper
Collet
See note on next page
for location in the
Specification Code
Morse Taper
Catalog No.
Description
“A”
“B”
“C”
AA
Flange
2.625
3.619/3.621
5.313
AB
AC
AD
AE
Piloted Slot
Piloted Slot – Lead Screw
Piloted Slot – High Torque
Piloted Slot High Torque – Lead Screw
2.3125
2.150/2.160
2.75
2.250/2.230
AF
AG
#25 ER Collet Socket
#32 ER Collet Socket
2.656
1.625
AH
AI
AJ
#33 Jacobs Taper
#33 Jacobs Taper Extended
#33 Jacobs Taper Extra Long
1.594
3.094
5.281
1.594
3.094
5.281
AK
AL
AM
AN
AO
AP
AQ
AR
AS
AT
AU
AV
AW
#2 Morse Taper
#2 Morse Taper Extended
#2 Morse Taper Quill Support
#2 Morse Taper High Speed
#2 Morse Taper Series “A”
#2 Morse Taper Series “A” Extended
#3 Morse Taper
#3 Morse Taper High Torque
#3 Morse Taper High Torque Extended
#4 Morse Taper
#4 Morse Taper Extended
#4 Morse Taper High Torque
#4 Morse Taper Lead Screw
3.562
5.344
1.235/1.230
1.235/1.230
5.688
7.688
6.562
6.188
7.812
5.688
7.688
7.812
5.688
1.9684/1.9689
1.9684/1.9689
1.2347/1.2350
2.1653/2.1659
2.1653/2.1659
1.9684/1.9689
1.9684/1.9689
2.1653/2.1659
1.870/1.875
Note: HT spindles are only available for hydraulic, all HT lead screw units and 87XX series ballscrew units.
36
Spindles (Continued)
Adjustable Adapter
Note: Location in the Specification Code
Model Spindle Drive Belt/Pulley Motor Belt Housing Special
X X XX ________
X
X
XX
XX
XX
Catalog No.
Description
“A”
“B”
AY
AZ
BA
BB
BC
BD
BE
BF
BG
BH
BI
BJ
BK
BL
BM
BN
BO
BP
BQ
BR
BS
BT
SP
3/4” Adjustable Adapter, 3/4” A.A.L.S. & 7/8” A.A.L.S.
3/4” Adjustable Adapter – Extra Long
1” Adjustable Adapter
1” Adjustable Adapter – Short
1” Adjustable Adapter – Extra Long With 4”
1” Adjustable Adapter – Extra Long With 6”
1-1/16” Adjustable Adapter
1-1/16” Adjustable Adapter – Extra Long
1-1/16” Adjustable Adapter – Quick Change
1-3/8” Adjustable Adapter – High Torque
1-3/8” Adjustable Adapter – High Torque Extra Long
1-7/8” Adjustable Adapter – High Torque Lead Screw
Special
3.469
1.230/1.235
4.094
3.094
5.688
7.688
4.094
5.688
4.938
8.156
5.688
4.938
5.688
7.688
7.313
8.938
5.688
7.688
6.188
6.188
7.188
6.563
1.595/1.600
1.595/1.600
1.9684/1.9689
1.9684/1.9689
1.595/1.600
1.9684/1.9689
1.6090/1.6095
1.6090/1.6095
1.9684/1.9689
1.9840/1.9845
1.9840/1.9845
1.9840/1.9845
2.1653/2.1659
2.1653/2.1659
1.9684/1.9689
1.9840/1.9845
2.1653/2.1659
2.6245/2.6255
1.9840/1.9845
2.625
Note: HT spindles are only available for hydraulic, all HT lead screw units and 87XX series ballscrew units.
37
Drives
Inline Drive
Hi-Lo
Planetary Reduction
See note on next page
for location in the
Specification Code
Catalog No.
Description
“A”
“B”
“C”
“D”
“E”
A
B
C
D
E
Inline Shaft Drive
High Torque
Coolant Through
Draw Bar
Draw Bar With Grease Port
5.000
5.000
5.000
5.000
5.000
.8740/.8745
1.3740/1.3745
1.3740/1.3745
1.3740/1.3745
1.3740/1.3745
3.000
3.438
3.438
3.438
3.438
3.250
3.688
3.688
3.688
3.688
0.125
0.250
0.250
0.250
0.250
F
G
H
Planetary Reduction 6:1
Planetary Reduction – High Torque
Coolant Through
6.250
6.250
6.250
3.688
3.688
3.688
I
J
Hi-Lo Reduction – Standard
Hi-Lo Reduction – High Torque
8.000
8.000
5.500
5.500
Note: If an HT spindle has been selected, choose an HT drive. HT drive is also required for coolant through or draw bar applications.
(Spindle choices: AE, AR, AS, AV, BM, BN, BQ, BT).
38
Drives (Continued)
Gear Reduction
Direct Drive
X X XX
XX
_______
X
XX
XX
XX
Catalog No.
Description
“A”
“B”
K
L
M
N
O
P
Q
R
S
T
5/8” Direct Drive
3/4” Direct Drive
7/8” Direct Drive
1-1/8” Direct Drive
1-3/8” Direct Drive
1-3/8” Direct Drive – High Torque
14mm Direct Drive
19mm Direct Drive
24mm Direct Drive
28mm Direct Drive
6-1/2
6-1/2
6-1/2
9-1/2
9-1/2
9-1/2
6-1/2
6-1/2
9-1/2
9-1/2
5/8
3/4
7/8
1-1/8
1-3/8
1-3/8
14mm
19mm
24mm
28mm
U
V
W
X
Y
Z
2.9:1 Reduction Drive
2.9:1 Reduction Drive – High Torque
.8740/.8745
.8740/.8745
.8740/.8745
.8740/.8745
.8740/.8745
.8740/.8745
“C”
“D”
“E”
17/32
17/32
17/32
19/32
19/32
19/32
17/32
17/32
19/32
19/32
2.380
2.380
2.380
2.380
2.380
2.380
2.438
2.438
2.438
2.438
2.438
2.438
4.938
4.938
4.938
4.938
4.938
4.938
Note: If an HT spindle has been selected, choose an HT drive. HT drive is also required for coolant through or draw bar applications.
(Spindle choices: AE, AR, AS, AV, BM, BN, BQ, BT).
39
Belts/Pulleys
X X XX
XX
X
____________
XX
XX
XX
40
A – 5 Step “3V” Section Pulley
B – 5 Step “B” Section Pulley
C – 4 Step “B” Section Pulley
D – 4 Step “B” Section Pulley
5 Step “B” Section Pulley
E – 4 Step Pulley & Belt Assembly
to Hi-Lo 1:1 & 6:1 Ratio Drive Assembly
F – 5 Step Pulley & Belt Assembly
to Hi-Lo 1:1 & 6:1 Ratio Drive Assembly
Belts/Pulleys (Continued)
A
Motor
RPM
5 Step “3V”
Section
Pulleys
RPM
870
1160
1750
3500
410
660
870
1130
1820
550
880
1160
1500
2400
830
1330
1750
2270
3650
1650
2670
3500
4550
7300
See note on previous page for location in the Specification Code
B
C
D
5 Step “B”
Section
Pulleys
HP
Max.
Duty
0.8
1.5
1.6
1.8
1.7
1.1
2.0
2.1
2.3
2.1
1.5
2.8
3.0
3.3
2.7
2.6
4.7
5.0
5.4
3.8
RPM
HP
Std.
Duty
0.2
1.8
2.2
2.2
2.0
1.4
2.2
2.8
2.7
2.1
1.8
2.9
3.6
3.4
2.1
450
620
870
1220
1700
600
830
1160
1620
2250
900
1250
1750
2450
3400
G
H
Motor
RPM
4 Step “B”
Section
Pulleys
HP
Max.
Duty
1.7
2.4
3.0
3.0
3.0
2.1
2.9
3.8
3.7
3.4
2.8
3.9
5.0
4.7
3.8
RPM
4 Step Pulley on Motor
5 Step Pulley on Driven Shaft
Low Range
HP
Std.
Duty
335
0.8
500
1.2
725
1.7
1050
2.0
HP
Max.
Duty
1.4
1.8
2.5
2.0
RPM
435
700
1090
1740
HP
Std.
Duty
0.8
1.2
1.8
1.5
580
930
1450
2320
0.9
1.4
2.1
1.3
1.6
2.2
3.0
2.5
450
660
960
1390
875
1400
2200
3500
1.0
1.8
2.8
1.7
2.0
2.9
4.0
3.0
680
1000
1450
2100
RPM
0.9
1.4
2.1
2.5
1.6
2.2
3.0
3.3
500
770
1160
1730
0.9
1.4
2.0
2.3
1.6
2.2
2.8
3.3
1.0
1.8
2.7
3.1
2.0
2.9
3.9
4.3
750
1160
1750
2600
1.0
1.8
2.5
2.9
2.0
2.9
3.6
4.3
“B” Section Belt & Pulley (Specify RPM) ____________________
Timing Belt & Pulley (Specify RPM) ____________________
E
F
4 Step Pulley on Motor Only
(For Use With “I” or ”J”
Hi-Lo Drive)
5 Step Pulley on Motor Only
(For Use With “I” or ”J”
Hi-Lo Drive)
870
1.3
1.7
2.4
2.9
Low Range
In Low
Position
RPM
56
83
145
218
1160
1.5
2.2
3.0
3.8
75
110
160
230
450
660
960
1380
1.6
2.1
2.9
3.6
83
130
190
290
500
780
1140
1740
1750
1.8
2.9
4.0
5.0
113
166
243
350
680
1100
1460
2100
2.0
2.7
3.9
4.8
125
195
290
440
750
1170
1740
2640
HP
Transmitted
High Range
HP
HP
Std.
Max.
Duty
Duty
375
0.8
1.4
580
1.2
1.8
870
1.6
2.3
1300
1.9
2.7
HP
Max.
Duty
1.4
1.8
2.4
2.7
In High
Position
RPM
340
550
870
1320
HP
Transmitted
1.4
1.7
2.4
2.9
High Range
In Low
In High
Position
Position
RPM
RPM
63
375
98
585
145
870
218
1320
HP
Transmitted
1.7
2.4
3.0
3.0
3.0
2.1
2.9
3.8
3.7
3.4
2.8
3.9
5.0
4.7
3.8
High Range
In Low
Position
RPM
72
104
145
204
280
97
138
193
271
385
145
208
240
408
–
In High
Position
RPM
450
620
870
1220
1700
580
830
1160
1620
2320
875
1250
1750
2450
3500
41
Motors
Note: Motors are ball bearing, enclosed NEMA “C” Flange
Mounted, 230/460 volt, 3 phase, 60 Hertz. Maximum motor
size is limited to HP transmitted on Belts/Pulley chart if
using step pulleys or by .009 HP/Rev for standard drives
and spindles, .055 HP/Rev on HT drives and spindles or by
the 8-1/2 flange ø if using our belt housing.
Catalog No.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
X1
Y
Y1
Z
Z1
42
H.P.
1/2
1/2
1/2
3/4
3/4
3/4
1
1
1
1-1/2
1-1/2
1-1/2
2
2
2
3
3
3
5
5
5
7-1/2
7-1/2
10
10
15
15
20
20
R.P.M.
1200
1800
3600
1200
1800
3600
1200
1800
3600
1200
1800
3600
1200
1800
3600
1200
1800
3600
1200
1800
3600
1800
3600
1800
3600
1800
3600
1800
3600
Frame
56C
56C
56C
143TC
56C
56C
145C
143C
56C
145C
145C
143C
145C
145C
145C
213TC
182TC
145TC
215C
184TC
182TC
213TC
184TC
215TC
215TC
254C
254TC
256TC
256TC
Shaft Dia.
5/8”
5/8”
5/8”
7/8”
7/8”
7/8”
7/8”
7/8”
7/8”
7/8”
7/8”
7/8”
7/8”
7/8”
7/8”
1-3/8”
1-1/8”
7/8”
1-3/8”
1-1/8”
7/8”
1-3/8”
7/8”
1-3/8”
1-3/8”
1-5/8”
1-5/8”
1-5/8”
1-5/8”
X X XX
XX
X
X
_______
XX
XX
Key Size
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
5/16”
1/4”
3/16”
5/16”
1/4”
3/16”
5/16”
3/16”
5/16”
5/16”
3/8”
3/8”
3/8”
3/8”
Flange Dia.
4-1/2”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
8-1/2”
8-1/2”
4-1/2”
8-1/2”
8-1/2”
8-1/2”
8-1/2”
8-1/2”
8-1/2”
8-1/2”
8-1/2”
8-1/2”
8-1/2”
8-1/2”
O.V.L.
13.25
12.00
11.38
13.25
11.38
11.38
13.38
12.31
11.38
13.31
12.31
12.06
15.68
16.55
16.45
18.68
15.19
14.19
19.81
16.55
16.55
18.68
16.56
19.21
18.68
23.60
23.16
23.66
23.16
Motor Dia.
6-5/8”
6-5/8”
6-5/8”
6-5/8”
6-5/8”
6-5/8”
6-5/8”
6-5/8”
6-5/8”
6-5/8”
6-5/8”
6-5/8”
7-7/8”
6-5/8”
6-5/8”
9-9/16”
7-7/8”
6-5/8”
9-9/16”
7-7/8”
7-7/8”
9-9/16”
7-7/8”
10-1/4”
7-7/8”
12-15/16”
12-15/16”
12-15/16”
12-15/16”
Clearance
5”
5”
5”
5-1/4”
5”
5”
5-1/4”
5-1/4”
5”
5-7/8”
5-7/8”
5-7/8”
5-7/8”
5-7/8”
5-7/8”
7-7/8”
5-7/8”
5-1/4”
7-3/8”
5-7/8”
5-7/8”
7-3/8”
5-7/8”
7-3/8”
5-7/8”
9-5/8”
9-5/8”
9-5/8”
9-5/8”
Motors (Continued) See note on previous page for location in the Specification Code
Catalog No.
H.P.
R.P.M.
Frame
Shaft Dia.
Key Size
Flange “A” Dia. Flange “B” Dia. O.V.L.
AA
.97
1090
KBA80B
19mm/0.784
6MM/.236
130mm/5.118
200mm/7.874
338mm/13.307 158mm/6.220 8-5/8”
Motor Dia.
Clearance
BB
1.35
1660
KBA80A
19mm/0.784
6MM/.236
130mm/5.118
200mm/7.874
353mm/13.897 158mm/6.220 8-5/8”
CC
1.55
1110
KBA90B
24mm/0.944
8MM/.315
130mm/5.118
200mm/7.874
394mm/15.512 178mm/7.007 9-1/2”
DD
2.4
1145
KBA100B
28mm/1.102
8MM/.315
130mm/5.118
200mm/7.874
441mm/17.365 196mm/7.716 5-1/4”
EE
3.5
1140
KBA112B
28mm/1.102
8MM/.315
130mm/5.118
200mm/7.874
464mm/18.267 220mm/8.661 11-3/4”
FF
3.7
1725
KBA100B
28mm/1.102
8MM/.315
130mm/5.118
200mm/7.874
441mm/17.365 196mm/7.716 10-3/4”
Catalog
No.
Motors Description
“A”
Length
“B”
Width
“C”
Length
Flange
Dia.
Shaft
Dia.
Key Size
Bolt Circle HoleØ
GG
Yaskawa SGMSH-10A Servo Motor
(149) 5.87
(100) 3.94
(45) 1.77
(95) 3.740
(24) .945
8mm x 7mm
(115) 4.53
(7) .276
HH
(175) 6.89
(100) 3.94
(45) 1.77
(95) 3.740
(24) .945
8mm x 7mm
(115) 4.53
(7) .276
II
Yaskawa SGMGH-13A Servo Motor
(185) 7.28
(130) 5.12
(58) 2.28
(110) 4.332 (22) .866
6mm x 6mm
(145) 5.709 (9) .354
JJ
(199) 7.83
(130) 5.12
(63) 2.48
(110) 4.332 (28) 1.102 8mm x 7mm
(145) 5.709 (9) .354
KK
Yaskawa SGMGH-30A Servo Motor
(192) 7.56
(180) 7.09
(79) 3.11
(114.3) 4.5
LL
Parker Max-Plus
#230 Series 6” Frame Servo Motor
(368) 14.48 (142) 5.59
(50) 1.97
(130) 5.120 (19) .748
MM
Parker Max-Plus
Series F-4050-Q-H0AA Servo Motor
X
X
(110) 4.332 X
NN
Indramat Model #MKD071 Servo Motor
(275) 10.82 (133) 5.23
(40) 1.575 (95) 3.740
OO
CSM, Inc. MPM1141FRMM-CM Servo Motor
(215) 8.46
(58) 2.28
PP
CSM, Inc. MPM1421FRMM-CM Servo Motor
(285) 11.22 (142) 5.59
(48.5) 1.97 (130) 5.12
(24) .945
8mm x 7mm
(165) 6.496 (11) .433
QQ
Intex MPM892T2E-1172 Servo Motor
(222) 8.75
(30) 1.18
(24) .945
6mm x 6mm
(98) 3.86
X
(114) 4.49
(82) 3.23
(35) 1.378 10mm x 8mm (200) 7.87
6mm x 6mm
(13.5) .530
(165) 6.496 (10) .394
(145) 5.709 (10) .394
(19) .748
6mm x 6mm
(130) 5.118 (9) .354
(110) 4.332 (19) .748
6mm x 6mm
(130) 5.118 (9) .354
(73) 2.874
(6) .326
43
Motors (Continued)
U
R
S
5/8
33/64
3/16
7/8
49/64
3/16
1-1/8 63/64
1/4
1-3/8 1-13/64 5/16
1-5/8 1-13/32 3/8
Nema “C” Frame Motors – Quick Reference Chart
Nema
Frame
44
D
E
2F
H
N
O
P
U
V
AA
AB
5
56C
3-1/2 2-7/16
3
11/32
2-7/16
6-7/8
6-5/8
5/8
1-7/8 1/2
143TC
145TC
3-1/2
4
5
11/32
2-1/2
6-7/8
6-5/8
AJ
AK
BA
BB
BD
XO
TAP
2-1/16 5-7/8
4-1/2
2-3/4 1/8 6-1/2
2-1/4 3/8-16
7/8
2-1/4 3/4 5-1/4
2-1/8
5-7/8
4-1/2
2-1/4 1/8 6-1/2
2-1/4 3/8-16
3-3/4
4-1/2
2-11/16
5-1/2
2-11/16
13/32
8-11/16 7-7/8
4-1/2
3-9/16
5-1/2
3-9/16
7/8
7/8
1-1/8
1-1/8
2-1/4
2-1/4
3/4 5-7/8
2-3/4
2-3/4
2-1/8
2-1/8
2-5/8
2-5/8
5-7/8
5-7/8
7-1/4
7-1/4
4-1/2
4-1/2
8-1/2
8-1/2
1/8 6-1/2
1/8 6-1/2
2-3/4
1/4
9
1/4
9
2-3/8
5-1/4
4-1/4
5-1/2
7
13/32
5-1/2
7
3-1/2
3-1/2
3-7/8
3-7/8
10-1/4 9-9/16
1-1/8
1-1/8
1-3/8
1-3/8
3
3
3/4 7-3/8
3-3/8
3-3/8
2-3/4
2-3/4
3-1/8
3-1/8
7-1/4
8-1/2
3-1/2 1/4
9
2-3/4 1/2-13
6-1/4
5
8-1/4
10
17/32
8-1/4
10
4-1/16
4-1/16
4-5/16
4-5/16
12-7/8 12-15/16
1-3/8
1-3/8
1-5/8
1-5/8
3-3/4
3-3/4
4
4
3-1/2
3-1/2
3-3/4
3-3/4
7-1/4
8-1/2
4-1/4 1/4
10
182C
184C
182TC
184TC
4-1/2
213C
215C
213TC
215TC
254C
256C
254TC
256TC
2-3/4
AH
1
9-5/8
–
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
Belt Housings
“B” – Small Extended (For 4-1/2" AK Motors Only)
“A” – Overhead (For 4-1/2" and 8-1/2" AK Motors)
“C” – Extended (For 4-1/2" and 8-1/2" AK Motors)
Note: These belt housings can be connected directly to all of the units or to the gear reductions. Alterations can be made for
coolant and draw bar applications.
1 (Top)
4 (Left)
2 (Right)
Looking at the unit from the spindle end, please
indicate the orientation of the belt housing.
3 (Bottom)
X X XX
XX
X
X
XX
______________
XX
45
Specials – Feed Control Valves
See note below for location in the Specification Code
V1 – Dual Feed Manifold
V2 – Skip Feed Cam Bar (Not Shown)
Please specify rapid distance, skip distance and depth. Contact Hause Machines for more information.
X X XX
XX
X
X
XX
XX
_________
46
Specials (Continued)
See note on page 46 for location in the Specification Code
Spindle Support Assembly
Catalog
No.
Stroke
“A”
SA1
4
7-3/8
SA2
6
8-13/16
Right Angle Milling Attachment
Catalog
No.
Stroke
“A”
“B”
SA3
4
15-1/2
23-9/16
SA4
6
17-1/2
25-9/16
Heavy Duty Boring Adaption With Roller Bearings
Catalog
No.
Stroke
“A”
SA5
4
15-1/2
SA6
6
17-1/2
47
See note on page 49 for location in the Specification Code
Heavy Duty Milling Adaption With Tapered Bearings
Catalog
No.
Stroke
“A”
SA7
4
15-1/2
SA8
6
17-1/2
4 Stroke High Speed Boring Spindle
Catalog
No.
Stroke
“A”
SA9
19-3/4
4
Heavy Duty Milling Adaption With Tapered Bearings and Thru Coolant
48
Catalog
No.
Stroke
“A”
SA10
18-3/16
4
Heavy Duty Right Angle Milling Head
Catalog
No.
Stroke
“A”
SA11
28-3/8
6
Support Quill and THK Slide Assembly
Catalog
No.
Stroke
“A”
SA12
4
11-1/32
SA13
6
14-3/16
X X XX
XX
X
X
XX
XX
_________
49

custom add-ons for english units

Transcription

Similar documents

AC SERVO DRIVES Sigma

Centrifugal Pump Performance Curves and Technical Information