Fiberglass • Blowing Wool Spray Foam Rigs • Spray Foam

Transcription

1-800-678-6868
Fiberglass • Blowing Wool
Spray Foam Rigs • Spray Foam
Weatherization & Insulation Accessories
[email protected] • www.IDI-Insulation.com
WELCOME!
ABOUT IDI
America’s contractors turn to IDI Distributors as a one-stop-shop for insulation products, technical
expertise, professional training and business support.
If you are a contractor who wants a supplier that will stand up for you, IDI offers an exclusive seven
point Customer Service Pledge to help you succeed in business. No other insulation distributor
will spend more one-on-one time with you to help you grow your business. We understand the
challenges you face on a daily basis, because we’ve been there too. We can offer the service, support,
products and professionalism you need to be profitable and more successful. After all,
“We Work For You”
Our Corporate Headquarters in Chanhassen, MN
IDI’s CUSTOMER SERVICE PLEDGE:
1
2
3
4
5
6
7
IDI will personally commit to helping you build your company into a professional and
profitable business.
IDI will supply you with a wide selection of the leading, national products at
competitive prices.
IDI will provide on the job training to you and your installers.
IDI will locally stock special order products; so you don’t have to tie-up your finances with
an inventory of seldom used products.
IDI will offer financial accounting support and business consulting, plus machine and
equipment financing to customers who are committed to IDI.
IDI will be your source for product and technical knowledge, along with the professional
guidance to help you sell each aspect of the job.
IDI will assist you with marketing materials that are customized to the specific products
and demands of your marketplace.
(952) 279.6400 • FAX (952) 279.6809 • TOLL FREE 800.678.6868
PRODUCTS
IDI Distributors has a nationwide distribution network to serve you, and we would like the opportunity to become your primary insulation source We offer a complete line of insulation products, equipment and accessories from the top manufactures in the industry at competitive prices.
We guarantee that when you do business with us, we will dedicate ourselves to supplying you with the quality
service and technical information you need, in addition to our top quality products. In other words, when you
do business with us, we go to work for you!
INSULATION:
2
FIBERGLASS............................................................... 2
• Standard & High Density Batts ..................... 2,3
• Blowing-Wool ...................................................... 4,5
• Commercial & Industrial Insulation........... ...6,7
MINERAL WOOL .......................................................8
• Commercial Insulation .........................................8
• Blowing & Spray Wool...........................................9
CELLULOSE ............................................................... 10
SHELVING AND STORAGE SYSTEMS:
31
IDI can help you stay organized with quality ventilated
and laminate storage systems from FREEDOM RAIL &
LIFETIME VENTILATED.
FIREPLACES:
32
IDI handles a wide variety of traditional or gas fireplace
models in many different styles by MONESSEN and
SUPERIOR for indoor, outdoor and patio.
SPRAY FOAM ............................................... 11,12,13
THERMAL BARRIERS ................................... 14,15
FIRESTOP AND SMOKE SEAL ....................... 15
FOAM SHEATHING ............................................... 16
REFLECTIVE INSULATION ............................... 17
INSULATION ACCESSORIES:
19
VENTILATION CHUTES ...................................... 19
POLYETHYLENE/VAPOR BARRIER ............ 20
TAPES I CAULKS I SEALANTS ...................... 21
STAPLERS I STAPLES ......................................... 22
SUPPORT SYSTEMS AND NETTING ....... 23
ACCESSORIES, MISC. .......................................... 24
INSULATION EQUIPMENT:
25
BLOWING MACHINES & VACUUMS .......... 25
SPRAY FOAM RIGS ........................................ 26, 27
LOW PRESSURE SPF SYSTEMS .................... 28
FRESH AIR SYSTEMS........................................... 29
SAFETY ACCESSORIES....................................... 30
www.IDI-Insulation.com • Warehouse or Local Delivery Available
1
INSULATION MATERIALS
FIBERGLASS
STANDARD & HIGH DENSITY BATTS
FIBERGLASS BATTS I OWENS CORNING
At IDI, we carry the complete line of Owens Corning Batt Insulation.
Available in :
• Unfaced • Kraft • Foil
• Formaldehyde Free
• Products meet ASTM 665
• Kraft and foil-faced batts have
flanges to allow for stapling
• Call for details and sizes
3SAVE WAREHOUSE SPACE
With unitized SpaceSaver packages you can store up to 40 more product in the
same amount of space, compared to individual bags.
3JOB SITE SAVINGS
Your savings continue right up to the time SpaceSaver units reach your job site.
Unloading is more efficient because each installer can deliver 4-5 bags at a time
rather than 2.
Owens Corning
R-8
R-11
R-13
R-19
R-22
R-25
R-30
R-38
Unfaced
M
W/M
W/M
W/M
W
W/M
W/M
M Metal Frame
Kraft
W/M
W/M
W/M
W/M
W
W/M
W/M
Foil
M
M
M
W/M
-
W Wood Frame
# per SpaceSaver Bundle
4 or 5*
4 or 5*
4 or 5
4 or 5*
4 or 5*
4
4
4
*5 packs in 15 or 16 inch material width only.
HIGH DENSITY BATTS I OWENS CORNING
For 2 x 4, 2 x 6 and Cathedral ceiling application. Enables the option of
increasing the R-factor or substituting lighter framing members to save cost
without sacrificing the overall thermal efficiency of the structure.
When used in a Cathedral ceiling application, a ventilated roof can be
obtained while still using standard 2 x 10 or 2 x 12 framing.
Owens Corning
R-15
R-21
R-30 C
R-38 C
2
Thickness
3.5”
5.5”
8.25”
10.25”
Unfaced
Yes
Yes
Yes
Yes
Kraft
Yes
Yes
Yes
Yes
5
5
5
4
(952) 279.6400 • FAX (952) 279.6809 • TOLL FREE 800.678.6868
FIBERGLASS
FIBERGLASS BATTS I CERTAINTEED
Fiberglass building insulation is intended for use in either residential or commercial construction as thermal and acoustical insulation in ceilings, walls and floors. The product is
available unfaced or kraft faced and is designed for use in standard wood stud and steel
frame assemblies.
• Benefits: Installing fiberglass insulation is an
easy, cost-effective method to help conserve
energy in residential and commercial new
construction, remodeling and reinsulation
projects. In addition to its thermal properties, Fiberglass insulation provides excellent
acoustical performance. It is compression
packaged for ease of handling, and its broad
availability of R-Values, sizes and facings
ensures the right product for the job.
CertainTeed
R-11
R-13
R-19
R-30
R-38
Unfaced
M
W/M
W/M
W/M
W/M
M Metal Frame
Kraft
W/M
W/M
W/M
W/M
W/M
• Composition: The product is composed of
tan, uniformly textured, inorganic fibrous
glass and formed with a formaldehyde-free
binding agent.
W Wood Frame
Foil
M
M
M
W/M
-
4 or 5*
4 or 5*
4 or 5*
4 or 5
4
*5 packs in 15 or 16 inch material width only.
HIGH DENSITY BATTS I CERTAINTEED
High-Performance Fiber Glass Building Insulation is intended for use in walls and
cathedral ceilings where maximum thermal performance is desired and limited space is
available.
• Benefits: In addition to its thermal properties, high-performance fiberglass building insulation also provides excellent acoustical performance. It is compression packaged for
ease of handling, and its broad availability of R-Values, sizes
and facings ensures the right product for the job. Highdensity sidewall batts are available in sizes to fit standard
construction without loss of R-Value due to compression.
High-density cathedral ceiling batts allow an airspace
between the insulation and roof deck for ventilation.
CertainTeed
R-15
R-21
R-30 C
R-38C
Thickness
3.5”
5.5”
8.25”
10.25
Unfaced
Yes
Yes
Yes
Yes
Kraft
Yes
Yes
Yes
Yes
5
5
4
4
3
BLOWING WOOL
PURE FIBERGLASS BLOWING WOOL I Owens Corning
PROPINK® L77 Loosefill Insulation backed by Owen-Corning’s reputation for quality products. See charts below for
R-values that can be achieved with different levels of coverage.
• 100% pure fiberglass blowing insulation for thermal and
accoustical protection
• Pneumatically installed in open areas or enclosed
construction cavities
• Blows into every nook and cranny for maximum thermal efficiency
• When used as cavity-fill insulation, this noncombustible product
increases the fire resistance of any buiding
3THERMALLY EFFICIENT I NON-COMBUSTIBLE
• Added insulation reduced costly heating and cooling losses. • Fiberglass is a mineral product that won’t burn (meets ASTM E-136).
3NON-CORROSIVE I ODOR-FREE I WON’T ROT OR DECAY
• No added chemicals to corrode pipes and wires I no noxious odors. • Like glass, ProPink doesn’t absorb moisture, so it won’t deteriorate.
3WILL NOT SETTLE I SUPERIOR SOUND CONTROL
• No settling or deterioration with age, so there is no danger of losing R-value over time. • Provides isolation from unwanted exterior noise.
3MEETS ALL FEDERAL & LOCAL STANDARDS I TESTED & PROVEN
• PROPINK® L77 Loosefill Insulation Complies with federal and local building standards and is a Type 1, Category 2 insulation under
ASTM C-764, replacing federal specification HH-I-1030B.
• PROPINK® L77 has been tested and verified in accordance with approved test methods by recognized independent laboratories
in the U.S. and Canada.
Owens-Corning ProPink L77 Unbonded Loosefill Insulation
ATTICS
Nominal Bag Weight 33 lbs.
R-Value
QualityYou Can
Measure!
R-13
R-19
R-22
R-26
R-30
R-38
R-44
R-49
R-60
Bags per
1000 Sq. Ft.
5.5
8.1
9.4
11.2
13.0
16.8
20.1
22.6
28.5
Maximum
Net Coverage
182.9
124.2
106.3
89.6
77.0
59.5
49.8
44.2
35.1
Minimum Weight/
Minimum
Sq. Ft.
Thickness (in)
0.180
4.75
0.266
6.75
0.311
7.75
0.368
9.00
0.428
10.25
0.555
12.75
0.662
14.75
0.747
16.25
0.940
19.50
Min. Settled
Thickness1
4.75
6.75
7.75
9.00
10.25
12.7
14.75
16.25
19.50
WALLS
R-Value
13
15
21
24
Minimum
Thickness
3.5 (2x4)
3.5 (2x4)
5.5 (2x6)
5.5 (2x6)
Installed Density
Maximum
Lbs. per Cu. Ft. Coverage per Bag
1.3
87.0
1.5
75.4
1.3
55.4
1.8
40.0
Minimum
Thickness
2x8
2x10
2x12
Installed Density
Maximum
1.4
39.0
1.4
30.6
1.5
23.5
Minimum
Thickness
2x8
2x10
2x12
Installed Density
Maximum
1.3
42.0
1.3
32.9
1.3
27.1
Bags per
1000 Sq. Ft.
11.5
13.3
18.1
25.0
Min. Weight
Lbs. per Cu. Ft.
0.379
0.438
0.596
0.825
Bags per
1000 Sq. Ft.
25.6
32.7
42.6
Min. Weight
Lbs. per Cu. Ft.
0.846
1.079
1.406
Bags per
1000 Sq. Ft.
23.8
30.4
36.9
Min. Weight
Lbs. per Cu. Ft.
0.785
1.002
1.219
FLOORS
R-Value
31
39
48
CATHEDRAL CEILINGS
R-Value
1 This product shows
negligible settling.
4
28
36
44
(952) 279.6400 • FAX (952) 279.6809 • TOLL FREE 800.678.6868
BLOWING WOOL
Blowing Wool I CertainTeed
InsulSafe® SP Fiberglass Blowing Insulation
PRODUCT DESCRIPTION
Basic Use: InsulSafe® SP Fiber Glass Blowing Insulation is used in residential and commercial construction as a thermal and acoustical insulation. It is designed for pheumatic installation in open attic areas and for retrofitting enclosed sidewall and floor/ceiling
construction assemblies.
Benefits: This product is noncombustible, noncorrosive and odor free. In addition, InsulSafe® SP won’t settle, contains no chemicals to cause mildew and fungus growth, contains no formaldehyde, provides no sustenance for vermin, contains no asbestos,
won’t rot or decay and won’t absorb moisture.
MATERIAL STANDARDS
ASTM C764, Mineral Fiber Loose-Fill Thermal
Insulation Type 1 - Pneumatic application Properties:
· Thermal resistance ASTM C518 and C687
· Critical radiant flux - ASTM E970
· Combustion Characteristics - SDTM E136
· Water vapor sorption - ASTM C1104
· Odor emission - ASTM C1304
· Corrosiveness - ASTM C764
· Fungi Resistance - ASTM C1338
FIRE RESISTANCE:
Fire Hazard Classification:
· (UL 723, ASTM E84)
MAX. FLAME SPREAD INDEX - 5
MAX. SMOKE DEV. INDEX - 5
NONCOMBUSTIBILITY:
· (ASTM E136)
Meets requirements
COVERAGE CHART - OPEN ATTIC APPLICATION
The following thermal performance values are achieved at the thickness, weights and coverages
specified when insulation is installed with pneumatic equipment in open blow application.
CertainTeed Unbonded Loosefill Insulation
ATTICS
R-Value
R11
R-13
R-19
R-22
R-26
R-30
R-38
R-44
R-49
R-60
Bags per
1000 Sq. Ft.
5.3
6.2
9.3
10.8
12.8
14.9
19.1
22.4
25.2
31.4
Maximum
Net Coverage
190.5
161.7
107.4
92.9
77.9
67.1
52.5
44.6
39.7
31.9
Minimum Weight/
Minimum
Sq. Ft.
Thickness (in.)
0.163
4.50
0.192
5.25
0.289
7.75
0.334
8.75
0.398
10.25
0.462
11.75
0.591
14.50
0.695
16.75
0.780
18.50
0.972
22.00
Min. Settled
Thickness
4.50
5.25
7.75
8.75
10.25
11.75
14.50
16.75
18.50
22.00
COVERAGE CHART - CLOSED CAVITY (WALLS, FLOORS, CEILINGS) RETROFIT APPLICATIONS
The following thermal performance vlaues are achieved at the thickness, weights and coverages specified when insulation is
installed with pneumatic equipment in closed wall, floor and celing cavities. Based on a design density of 1.6lb./ft3.
CertainTeed Unbonded Loosefill Insulation
WALLS - FLOORS - CEILINGS
R-Value Minimum bags Maximum sq. ft. Minimum Weight
per 1000 sq ft. Coverage per Bag Lbs per Sq. Ft.
14
15.1
66.4
0.467
15
16.1
62.0
0.500
16
17.2
58.1
0.533
22
23.7
42.3
0.733
Min. Installed
thickness (in.)
3.50
3.75
4.00
5.50
5
COMMERCIAL/INDUSTRIAL INSULATION
INDUSTRIAL INSULATION
IDI Distributors carries a complete line of industrial insulation products. Even if you
don’t see it in our catalog, we can get it for you promptly and at a competitive price.
Since many of these products are custom in nature, we invite you to call us for bids.
FIBERGLASS INSULATION I OWENS CORNING
Owens Corning manufactures a complete line of fiberglass and building insulation
products that provide maxumum energy efficiency and sound control in commercial structures.
3 COMMERCIAL BLANKET INSULATION
Designed for use between metal studs of some suspended ceilings, lightweight fiberglass blanket insulation offers both thermal
and sound insulation. This easy-to-install product is available in full 16” or 24” widths in a wide range of R-factors. It comes unfaced,
kraft faced or foil faced.
3 FLAME SPREAD 25
Walls and ceilings where the insulation facing is exposed need the extra protection fo Flame Spread 25, a fiberglass insulation with a special Foil/Kraft laminate facing. The surface burning characteristics include a Flame Spread of 25 and Smoke Developed of 50, per ASTM
E84-80. Suitable for low abuse areas.
3 SEMI-RIGID INSULATION BOARD
This lightweight, resilient insulation is designed for use in curtain walls, masonry wall cavity spaces and interiors of masonry walls between
furring channels. Two types are available, and both come faced or unfaced. 703 is for exterior walls and between widths of masonry walls,
while higher strength 705 is for areas requiring greater resistance or a more uniform appearance.
3 CW225 FIBERGLASS INSULATION
Owens Corning’s semi-rigid insulationg board, made of inorganic glass fibers, is specially designed for thermal and accoustical
insulation in commercial curtain wall systems. It comes unfaced or faced with a foil scrim Kraft vapor retarder.
BLACK MAT ACOUSTICAL BOARD/BLANKET I OWENS CORNING
SelectSound Black Acoustic Board, composed of inorganic glass fibers, provides excellent
acoustic performance for multiplex theaters, sound studios and performaing arts centers. It is
dimensionally stable, will not shrink, warp, rot or mildew, and is noncorrosive to steel, copper and
aluminum.
Acoustic benefits SelectSound Acoustic Board helps provide the highest quality audio reproduction by reducing sound reverberation within spaces, It will absorb up to 100% of the sound
striking its surface depending on the specified thickness.
SelectSound Black Acoustic Blanket is an all black wool product with a black mat surface
composed of inorganic glass fibers. It is excellent for eliminating light reflections while providing
superior acoustical performance in multiplex theaters, sound studios and performing arts centers.
It is also ideal for use above suspended metal ceiling systems.
Acoustic Benefits SelectSound Black Acoustic Blanket helps provide the highest quality audio
reproduction by reducing sound reverberation within spaces. Depending on the specifed thickness, it will absorb up to 100% of the sound striking its surface (1.00 NRC)
6
(952) 279.6400 • FAX (952) 279.6809 • TOLL FREE 800.678.6868
COMMERCIAL/INDUSTRIAL INSULATION
Metal & Post Frame Building Insulation I OWENS CORNING
PRODUCT DESCRIPTION
Owens Corning Certified R Metal Building Insulation is a light density fibrous glass blanket
designed to be laminated and can be used unfaced as well with a variety of appropriate facings. Certified R is available in standard R-values of 10, 11, 13, 16, 19, 25 and 30. Standard roll
widths are 36”, 48”, 60” and 72”
USES
Certified R Metal Building Insulation is used as part of the insulation system in the roofs and
sidewalls of metal buildings. It is designed to be laminated with a variety of facings to provide attractive interior finishes, abuse resistnace, and assistance in control of moisture.
Physical Property Data
Property
Test Method
Result
Moisture Absorption
ASTM C 1104
<2% by weight
Fungi Resistance
ASTM C1338
provides no sustenance
Fire Hazard Classification
UL 7231 ASTM 84, CANULC s.102
FHC 2500
Noncombustibility
ASTM E 136
Noncombustibility
For Thermal Condensation and Noise Control:
Fiberglass
3” - R10
3 1/2” - R11
4” - R13
5” - R15
6” - R19
8” - R25
10” - R30
Widths
Up to 72”
Up to 72”
Up to 72”
up to 72”
Up to 72”
Up to 72”
Up to 72”
Facings for all R factors
WMP-VR, WMP - 10
WMP - 50, WMP - 30
WMP - 30, WMP-F
WMP-VR -R Plus
R-3035 HD
GYMGUARD
Lengths
as needed
as needed
as needed
as needed
as needed
as needed
as needed
For Condensation and Noise Control:
Fiberglass
1”
2”
Vapor Retarder Widths
FSK (Foil Scrim Kraft)
PSK-VR (Polypropylene Scrim Kraft)
Lengths
36” and 48”
36” and 48”
up to 250”
up to 250”
For Unfaced Fiberglass Insulation
For Added Protection against Birds and Rodents
Tuff Face
1”
2”
Widths
36’” and 48”
36’” and 48”
Lengths
Up to 250”
Up to 250”
Fiberglass
3” - R10
4” - R13
6” - R19
8” - R25
10” - R30
Widths
Up to 72”
Up to 72”
Up to 72”
Up to 72”
Up to 72”
Lengths
as needed
as needed
as needed
as needed
as needed
7
MINERAL WOOL
Mineral Wool I THERMAFIBER
THERMAFIBER products are designed to provide life saving fire protection in curtain wall and
perimeter fire containment systems. These products are noncombustible, moisture-resistant,
noncorrosive, nondeteriorating, mildewproof and vermin-proof. 40 & 90 provide thermal
insulation, fire protection, acoustical and vapor control in many different fire containment assemblies of 1, 2, and 3-hr ratings.
Exceptional performance in Perimeter
Fire Containment Systems
· Provides life saving fi re protection in rated assemblies
· Fire resistant to temperatures above 2,000°F (1,093°C)
· Conserves energy, reduces
· Greenhouse gasses and carbon emissions
· Highest available recycle content curtain wall insulation.
· Mold resistant
· Controls noise and sound
Mineral Wool I ROXUL
Roxul’s AFB® is a lightweight, semi-rigid batt insulation designed specifically for
interior wall and floor applications. This stone fiber based* insulation is made from
natural stone and recycled content. It’s a green product that provides superior
sound absorbency and fire protection for overall occupant comfort and safety. That’s
why AFB® is quickly becoming the insulation of choice for today’s green builders in
commercial and industrial construction.
Fire Resistant
Roxul AFB®’s combination of stone fiber and recycled content makes this insulation
fire resistant. This noncombustible product does not develop smoke or promote
flame spread when exposed to flame, making AFB® a critical line of defense in
fire protection. In fact, studies have proven that stone or mineral fiber insulations
provide a 54% increase in overall fire resistance rating compared to non-insulated
assemblies.
Sound Control
Room to room or floor to floor, when Roxul AFB® is specified for interior wall or floor
assemblies, better overall sound control and fire protection are achieved. Compared
to other types of insulation, the stone fiber content of AFB® provides increased
density that effectively reduces airflow and essentially, sound transmissions. Greater
noise or sound control is further achieved when thicker AFB® and gypsum board
are used together. AFB® thickness ranges from 1.5” (38 mm) to 3.5” (76 mm). Testing
demonstrates that Roxul AFB’s inherently higher density and manufacturing process
delivers dramatically better airflow resistivity compared to glass fiber. Higher air
flow resistivity means better sound attenuation.
* Roxul’s AFB® is classified as mineral wool. However, the unique formulation of Roxul insulation delivers benefits that set it apart from traditional mineral wools. These benefits
are only available in stone fiber based products.
8
(952) 279.6400 • FAX (952) 279.6809 • TOLL FREE 800.678.6868
MINERAL WOOL
AMERROCK PRODUCTS
Amerrock Products are designed to stand up to North America’s scorching heat to extreme
cold and moisture intense environments. These products provide the best possible combination of fire containment, sound control, thermal insulation and energy conservation for both
external/internal walls and ceilings. Amerrock Products are also ecologically sound and are
made from sustainable products and recycled materials. They contain no asbestos, formaldehyde or chemical additives.
Amerrock Products mineral fiber is non-combustible, moisture-resistant, non-corrosive, nondeteriorating, mold, fungus, and mildew-proof, vermin-proof and odor-free. It resists temperatures over 2150°F. These products are required to be pneumatically sprayed into either wood
or steel frame structures to form a monolithic coating. This process seals cracks and holes in
the wallboard, around plumbing, electrical outlets, vent ducts and other irregularities, resulting in no compressed areas or voids that allow sound leaks, R-value reduction, or air infiltration.
FireStopTB™ I AMERROCK PRODUCTS
FireStopTB™ when sprayed to a thickness of 1.5” will provide a code complaint 15 minute thermal barrier over all manufacturer’s open and closed cell SPF based on the 2012 IBC. Because
it has an R-Value of 6.2 it can provide a significant cost savings as compared to thermal barrier
coating.
FireStopTB™ Adhesive I AMERROCK PRODUCTS
FireStopTB™ Adhesive is a unique, high bonding adhesive designed to adhere FireStopTB™
to both open and closed cell Spray Polyurethane Insulation to achieve a code compliant 15
minute thermal barrier. It can also be used as an adhesive to adhere Rockwool Premium Plus™
Insulation overhead up to a maximum 3” on a variety of substrates such as wood, metal, and
concrete.
Rock Wool Premium Plus™ Insulation I AMERROCK PRODUCTS
Rockwool Premium Plus™ Insulation is formulated to be pneumatically installed in vertical wall
surfaces as well as blown in open areas. It is used in existing construction to eliminate plumbing noise, sound transmission through walls and to provide effective thermal and fire barrier in
the exterior and interior walls.
Rockwool Premium Plus™ Wall Spray Adhesive I AMERROCK
Specifically designed to be used with Rockwool Premium Plus™ Insulation in a wetspray wall
application. Use in overhead application is not permitted. Coverage will vary based on thickness of insulation being sprayed.
Procoustic Coating I AMERROCK PRODUCTS
ProCoustic is a high quality acoustical coating that was specifically developed to be
sprayed over acoustical materials so that they will maintain or increase their acoustical
value. It carries a class A fire rating and is the only manufacturer’s approved coating that
can be applied to Rockwool Premium Plus Insulation or FireStopTB.
Coverage is:
Black: 200 sf per gallon
White: 125 sf per gallon
Colors: 125 - 200 sf per gallon
Coverages rates are based on ProCoat application guidelines.
9
CELLULOSE
Cellulose I US GREENFIBER
GreenFiber products provide incredible sound attenuation as well as thermal resistance.
All GreenFiber products contribute toward LEED points and sustainable building, exceed
all federal testing requirements, are listed and classified by Underwriters Laboratories,
carry SCS Certification for recycled content, and are backed by a Lifetime Guarantee.
Loose Fill Products:
INS515LD – Low dust, loose fill product for attic and dry dense pack applications – for new and
retrofit applications.
INS765LD – All borate, low dust, loose fill product for attic and dry dense pack applications –
for new and retrofit applications.
INS770 – Premium all borate, loose fill product designed especially for retrofit drill and fill applications. Provides superior flowability and greatly reduces clogging resulting in significant
labor savings.
Stabilized Products (require a stabilization system):
INS500 – Stabilized attic product – for new residential attics as well as agricultural applications.
INS735 – All borate, stabilized wallspray product – for wallspray applications.
INS745 – All borate, stabilized attic and wallspray product – for all stabilized attic and wallspray applications.
GreenFiber is available in all 50 States.
Cellulose I CHAMPION
This fully warrantied product by Champion Insulation delivers some of the best
coverage performance in the market. It promises to retard fire, resist heat loss, and
retain all physical characteristics required to meet federal safety standards. Its low
density makes it economical, easy to handle and blow, and creates less weight loading in the attic.
Available only in Wisconsin, Illinois, Iowa, and Indiana.
Cellulose I APPLEGATE
Applegate insulation helps buildings stay warmer in the winter and
cooler in the summer by effectively controlling all 3 methods of heat
transfer: convective, conductive, and radiant. Buildings are more
comfortable and less expensive to operate and maintain.
10
(952) 279.6400 • FAX (952) 279.6809 • TOLL FREE 800.678.6868
SPRAY POLYURETHANE FOAM
SPRAY FOAM
Spray Foam expertise is in demand and IDI can help. Our partnerships with manufacturers and contractors, combined with our
knowledgeable staff makes us your spray foam expert.
With today’s rising energy costs, focus on green building and sustainability, it’s no surprise more and more builders are using spray
polyurethane foam.
Lower Utility Bills
As much as 50% of the energy used in your home can go to heating and cooling. When properly installed, our Spray Foam products
act as a continuous air barrier, allowing you to control indoor air quality to a much higher degree. Live in a quieter, healthier and
more comfortable environment, all while reducing your energy consumption.
Green Building with Spray Foam
How would you like to leave a smaller carbon footprint? Use fewer resources to heat and cool your home? You can do both when
you choose to insulate your structure with Spray Foam products. When insulating with Spray Foam, you virtually eliminate the areas
where energy and dollars are escaping from, thus using less resources to maintain a comfortable living environment for you and your
family.
Whether you’re building your dream home, retirement escape, office or agricultural building, our Spray Foam is the right building
insulation.
Bayseal OC I BAYER MATERIAL SCIENCE
Bayseal™ OC is a two-component polyurethane system of polymeric isocyanate “A-Component” and a resin blend “B-Component.”Bayseal™ OC is formulated as a nominal 0.5 lb/ft’, open
cell foam. Bayseal™ OC is intended for application in residential and commercial structures for
insulation and sound attenuation.
Bayseal CC X & Bayseal CC XP I BAYER MATERIAL SCIENCE
Bayseal™ CC is a two-component system of polymeric isocyanate “A- Component” and a water
/ Enovate 3000 (HCFC-245fa) blown “B-Component.” Bayseal™ CC is formulated as a nominal
low density of, 2.0 lb/ft’, closed cell foam. Bayseal™ CC is intended for perimeter wall application in residential and commercial structures.
Mondur® MR-Light I BAYER MATERIAL SCIENCE
Polymeric diphenylmethane diisocyanate (pMDI) A side - Component
Corbond III SPF I JOHNS MANVILLE
JM Corbond III closed-cell spray polyurethane foam (SPF) is a premium insulation perfectly
suited for the building envelope. It outperforms competing closed-cell spray foam systems
under many conditions. With an extremely high R-value, it acts as a barrier to keep the indoors
from the outside climate, creating thermal, air and moisture isolation. JM CORBOND III insulation is the only polyurethane spray foam accepted by the Air Barrier Association of America
(ABAA) that can be used as a stand-alone system without additional material and labor costs
associated with preparing penetrations and wallboard seams before applying the spray foam.
Easy to use and fast to install when installed correctly, it will not shrink or settle, so its thermal
and acoustical performance lasts the life of a structure. JM Corbond III SPF and its unique
Lavender® color have become a symbol of uncompromising quality, performance and environmental commitment.
11
Corbond Multi-Climate Solution (MCS) I JOHNS MANVILLE
Johns Manville Corbond Multi-Climate Solution (MCS) is the ultimate insulation solution.
It acts as a barrier to keep the indoors from the outside climate, creating thermal, air and
moisture isolation. Because it will not shrink or settle, its incredible thermal and acoustical
performance lasts the life of a structure. JM Corbond MCS and its unique Lavender® color have
become a symbol of uncompromising quality and standards and a mark of environmental
commitment. Fast, easy and adaptable, it can achieve an R-value of 19 in 2x4 construction. JM
Corbond MCS is well suited for residential, commercial and industrial applications.
JM Open Cell Spray Foam (ocSPF) I JOHNS MANVILLE
JM Open-cell Spray Polyurethane Foam (ocSPF) insulation is a two-component, low-density,
nonstructural insulation system designed for commercial, residential and industrial applications. The low-density nature of JM ocSPF insulation allows for tremendous yield while still affording critical air sealing of the home, office space or classroom—resulting in better air quality and increased comfort for building occupants. The JM ocSPF insulation system comprises
an “A” component or aromatic diisocyanate and a blended “B”component, which includes
polyols, fire-retardant materials, catalysts and a water-blown agent.
Recommended Uses
· Walls,
· Floors
· Vented Attics,
· Unvented Attics,
· Ceilings
Performance Avantages
· Mold and mildew resistant
· Provides an effective air barrier
· Minimizes sound transmission
· Provides R-3.8 at 1 inch
CertaSpray™ Open Cell Foam I CERTAINTEED
If you’re concerned about comfort and energy savings in your new home, CertaSpray foam is
your best choice. It provides best-in-class performance from a name you trust for the highest quality building products-CertainTeed. CertaSpray foam insulation performs like no other
insulation. It provides an effective air seal which reduces energy loss and improves indoor
air quality. Adds to your home’s resale value, too. You can actually feel the difference in your
everyday quality of life!
CertaSpray™ Closed Cell Foam I CERTAINTEED
CertaSpray closed cell foam insulation is the newest addition to the complete line of quality
insulation Products from CertainTeed. As an all-in-one insulation air sealing system, CertaSpray
foam insulation is designed to solve your extreme insulation requirements.
CertaSpray foam is appropriate for whole house applications or in combination with fiber
glass, and is supported by the CertainTeed Building Science Professionals. These professionals experts in recommending the best performing thermal envelopes. Best of all, you get it all
from an insulation leader you already know and trust – CertainTeed.
CertaSpray provides homebuyers:
· Outstanding energy efficiency
· Superior comfort and indoor air quality
· Enhanced moisture management
· Added structural integrity
· Excellent sound control
12
CertaSpray Performance:
· A high R-Value miinimizes hot and cold spots in a home to improve efficiency
and comfort.
· Rigidity provies added structural integrity to walls.
· As a secondary moisture vapor barrier, it helps reduce the risk of moisture
intrusion in the wall cavity.
(952) 279.6400 • FAX (952) 279.6809 • TOLL FREE 800.678.6868
QuadFoam® 2.0 I QUADRANT
QuadFoam® 2.0 is a two component, one-to-one by volume, spray applied rigid polyurethane
foam. QuadFoam® 2.0 utilizes an EPA approved, non-ozone depleting blowing agent. A low
viscosity, “HIGH YIELD” 2.0 lb. closed-cell material that is excellent for insulating, air sealing and
noise reduction. It contributes to providing a self-adhering, seamless building envelope that reduces air, dust, pollution and pest infiltration. This spray foam has been specially formulated to
meet the intent of the International Code Council (ICC) building codes and is used primarily as
a moisture/vapor barrier, air barrier and thermal insulation on above and below grade interior
and exterior applications.
QuadFoam® 2.0 (winter blend) I QUADRANT
QuadFoam® 2.0 (Winter Blend) is a two component, one-to-one by volume, spray applied
rigid polyurethane foam. QuadFoam® 2.0 (Winter Blend) utilizes an EPA approved, non-ozone
depleting blowing agent. A low viscosity, “HIGH YIELD” 2.0 lb. closed-cell material that is excellent for insulating, air sealing and noise reduction. It contributes to providing a self-adhering,
seamless building envelope that reduces air, dust, pollution and pest infiltration. This spray
foam has been specially formulated to meet the intent of the International Code Council (ICC)
building codes and is used primarily as a moisture/vapor barrier, air barrier and thermal insulation on above and below grade interior and exterior applications.
QuadFoam® RetroSeal® 2.0 I QUADRANT
QuadFoam® RetroSeal® 2.0 is “The No Heat Foam™” Insulation System that uses water as the
blowing agent and is designed for the latest in application and equipment technology.
QuadFoam® 500 I QUADRANT
QuadFoam® 500 polyurethane foam is a low viscosity, “EXTREMEMLY HIGH YIELD, No/Low
Order” 0.5 lb. open-cell material that is excellent for insulating, air sealing and noise reduction.
It contributes to providing a self-adhering, seamless building envelope that reduces air, dust,
pollution and pest infiltration. QuadFoam® 500 utilized water as the blowing agent. Designed
for use in interior commercial and residential construction applications and is compatible with
most construction materials.
QuadFoam® Nature Seal® 500 Open Cell I QUADRANT
The QuadFoam® NatureSeal® 500 product utilizes water for the blowing agent. It is designed
for use in interior commercial and residential construction applications and is compatible
with most common construction materials. The spray characteristics are tailored for attic and
crawlspace application.
QuadFoam® NatureSeal® 500 is a two component, spray-applied, low density, open cell polyurethane foam that contains bio, renewable, recycled and sustainable content. QuadFoam®
NatureSeal® 500 is Class 1 rated and meets AC 377 Appendix X requirements without an Ignition Barrier Coating in Attics and Crawl Spaces.
QuadFoam® - RetroSeal® 500 I QUADRANT
QuadFoam® RetroSeal® 500 is “The No Heat Foam™” Insulation System that uses water as the
blowing agent and is designed for the latest in application and equipment technology.
13
DC315 I INTERNATIONAL FIREPROOF TECHNOLOGY INC.
DC315 Certified Warnock Hersey Approved ICB code-compliant Thermal & Ignition Barrier over
polyurethane foam.
SPF may be covered with alternative barrier coating system ONLY if a large-scale fire, 15 minute test has
been performed and passed by an accredited fire testing facility of the specific foam brand and type.
Thermal Barrier approved for these products:
DC315 a single component, single application, spray or roller applied protective coating for use in thermal and ignition barrier applications
over spray applied polyurethane foam insulation.
ARNETT AGRICULTURE BASE CC 2 lb.
BASF Enertite OC 9.5 lb.
BAYSTREAM , BaySeal™ OC 0.5lb.
BAYSTREAM, BaySeal™ CC 2 lb.
DOW STRYROFOAM CM 2045 CC 2 lb
Natural Polymers Natural Thermal CC 2 lb.
Natural Polymers Natural Thermal CC 0.5 lb.
Natural Polymers NU-Seal™ 0.50 PCF
Natural Polymers NU Seal™ 2.0 W PCF
ICYNENE. MDC 200 CC 2 lb.
ICYNENE, LD C 50 OC 0.5 lb.
LAPOLLA, FL 2000 CC 2 lb.
LAPOLLA, FL 500 OC 0.5 lb.
NCFI Sealite™ OC 0.5 lb.
NCFI InsulStar® CC 2 lb.
Premium Foamsulate™ 210 CC 2 lb.
Premium Foamsulate™ 50 CC 0.5 lb.
CORBOND, OC 0.5 lb.
CORBOND, ccSPF™ CC 2 lb.
CORBOND, MCS™ CC 2 .b
Quadrant, Quadfoam 2 lb. CC
Quadrant Quadfoam 500 OC 0.5 lb.
Quadrant Quadfoam NatureSeal 500 OC 0.5 lb.
Rhino Linings - DuraTite® 2.0 CC 2 lb.
Rhino Linings - BioBased 501® OC 5.0 lb.
SWD-QuikSheld 106 OC 0.5 lb.
SWD-QuikSheld 112 CC 2 lb.
ThermoSeal 2000/2100 CC 2 lb.
ThermoSeal 500 OC 0.5 lb.
Versi-Foam® Class I CC 2 lb.
GACO Western 183MCC 2 lb.
GACO Fire Stop 5599 OC 0.5 lb.
GACO Green 052N, OC 0.5 lb.
Ignition Barrier approved for these products:
CERTAINTEED, CertaSpray OC 0.5 lb.
GACO Green 052N, OC 0.5 lb.
GACO Pro Max 5002 OC 0.5 lb.
Air Tight OC 0.5 lb.
BAYSEAL™ OC 0.5 lb.
HENRY PERMAX OC 0.5 lb.
ICYNENE, MD-R-200 CC 2 lb.
ICYNENE, LD C 50 OC 0.5 lb.
JM Corbond III CC 2 lb..
LAPOLLA, FL 500 OC 0.5 lb.
QUADRANT, Quadfoam 500 OC 0.5 lb.
NCFI Sealite™ OC 0.5 lb.
Premium Foamsulate™ 50 OC 0.5 lb.
Rhino Linings - BioBased 501® OC 0.5 lb.
BAYSEAL™ IC I BAYER MATERIAL SCIENCE LLC
Bayseal IC is a single component, water-based, intumescent coating designed for application
as an ignition barrier substitute over polyurethane foam in attics and crawl spaces. Bayseal IC
is formulated for application over polyurethane foam to reduce heat transfer and surface
burning in the event of a fire.and T” ratings.
Typical Physical Properties
Theoretical coverage - 100s.f./gal @ 8.8 dry mils
Wet Physical Characteristics
Shelf Life - 6months when properly stored
Clean Up - Water
Typical Dry Times
Dry to touch - 2 hours
Cure - 24 hours
FireStopTB™ I AMERROCK PRODUCTS
FireStopTB™ is a high quality mineral fiber manufactured in a granular form which allows it
to be sprayed onto open and closed cell foam with the addition of FireStopTB™ Adhesive
will provide a 15 minute thermal barrier at 1 ½” over all manufacturers open and closed
spray foams.
14
(952) 279.6400 • FAX (952) 279.6809 • TOLL FREE 800.678.6868
THERMAL & IGNITION BARRIERS
Fireshell® INTUMESCENT COATINGS I TPR2 CORPORATION
The Fireshell® line of thermal and ignition barrier intumescent coatings from TPR2 Corporation is your best choice to achieve
code compliance over your SPF. Features include:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Reduced labor cost, reduced material cost and higher profits
Cleans up easily with water-Non Toxic-No Formaldehyde.
Applied with standard .75 g. p. m. sprayer – half the size recommended by competition.
Industry’s highest mold resistance rating.
Washable After Cure-High Water & Scrub Resistant-Ductile.
Lowest VOC rating in the industry. Passed strict EPA – VOC and AQMD tests.
The industry’s only AQMD listed Super-Compliant Thermal Coating Company.
Complies with USDA Food Safety Inspection Service for incidental food contact
Single-pass application & quick drying time.
No complicated mixing - just stir the coating before application.
Capable of receiving multiple LEED credits depending on project.
US owned and US manufactured product.
TB available in off-white & charcoal black color and can be custom tinted for larger orders.
Sprayer training and certification available through IDI & TPR2.
Consistent, better yields in the field-One Year Shelf Life.
Fireshell® TB I TPR2 CORPORATION
Fireshell® TB is the one step solution to achieve NFPA 286 thermal barrier compliance over
your SPF. Complies with the latest 2011 NFPA 286 revision, 2009 IBC 803.1.2, and meets NFPA
101 life safety code.
Fireshell® IB I TPR2 CORPORATION
Fireshell® IB is the one step solution to achieve NFPA 286 AC 377 Appendix X ignition barrier
compliance over your SPF.
Fireshell® ICP I TPR2 CORPORATION
Fireshell® ICP is the Primer Coat for your QuadFoam 500 and Vapor Barrier for OC SPF. 15mils
dries to 8mil, nominal up to 125+ ft. 2/gal coverage
FIRESTOP AND SMOKE SEAL
Firestop and Smoke Seal I SPECIFIED TECHNOLOGIES INC.
STI offers a total system of “Fire Stopping Materials” and product integration to
provide you with a wide range of firestopping solutions. STI SpecSeal gives you a
higher “T” rating for fast, sure closure. SpecSeal’s patented “Two-Stage” expansion
continues to 1900 F° for higher “F and T” ratings.
15
FOAM SHEATHING
Thermax Foil Faced Insulation Board I DOW
The most energy-efficient insulation board available. Its uniform, closed-cell structure is especially resistant to the flow of heat, and the laminated aluminum facings provide an effective
moisture barrier.
These products come in a variety of finishes for both concealed and exposed applications and
are recommended for agricultural, commercial and industrial buildings.
Products are available in thicknesses from 1/2”to 4”.
Extruded Polystyrene I FOAMULAR I GREENGUARD
Tough, closed-cell extruded polystyrene foam with a reputation as a dependable product.
Its superior resistance to water assures long-term R-value retention in such applications as
foundation perimeters, wall insulation and drywall laminate. Available in a broad range of densities for any application. Fan fold backer board is also available for your needs. Call for details.
High Thermal Efficiency I R-MAX/HUNTER
If you’re looking for high thermal efficiency at low cost, here it is. R-Max is designed for easy
installation in the following applications:
Products:
·
·
·
·
·
·
·
·
New frame wall construction
Cavity wall insulation in new masonry construction
Interior basement and crawl space insulation covered with minimum 1/2” gypsum
board
Insulation between exterior stucco finish and face brick, or frame wall construction
Testing requirements:
Under roof shingles over roof decks, in exposed beam and cathedral type ceilings
and A-frame construction
Under slab thermal construction
Retrofit behind new exterior siding
Retrofit behind new interior finish of minimum 1/2” gypsum board
Product Availability
R-Max and Hunter panels are available in standard 4’ x 8’ and 4’ x 9’ sections with thicknesses from 1/2” to 4”.
Other sizes and thicknesses may be special ordered. Minimum order quantities may apply.
16
(952) 279.6400 • FAX (952) 279.6809 • TOLL FREE 800.678.6868
REFLECTIVE INSULATION
AA2 Vapor Shield I FI-FOIL
Fi-Foil’s Vapor Shield is a multi-layer reflective insulation intended for use on furred-out masonry walls. The inside layer is a minimum .00045” aluminum foil. The outer layer is 35 lb. natural kraft paper coated with polyethylene, flange boards or expanders separate the paper from
the foil creating a R-4.1 reflective air space. When installed on ¾” furring strips spaced 16” or
24” on center, a second reflective air space is formed. The R-value of this air space is dependent
upon the thickness of the furring strip selected. AA2 Vapor Shield is available in Standard &
High-perm.
FSK Shield I FI-FOIL
Fi-Foil’s FSK Shield is a single-sided foil facing that is comprised of 0.0003”aluminum foil
bonded to 30 lb. natural kraft paper with a flame retardant adhesive and is reinforced with
tri-directional fiberglass scrim. FSK Shield is intended for use as an attic, roof, or wall radiant
barrier and as a class A insulation facing.The product also can be used as an effective vapor
barrier. FSK Shield is available in 1000 square foot rolls 54” wide.
VR Plus Shield I FI-FOIL
The VR Plus Shield is a multi-layer reflective insulation for furred-out masonry walls. This
unique insulation has expanding layers that separate to create three reflective air spaces,
and R-valves up to R-7.1. All products, including the VR Plus Shield are made with sustainable
green building materials, making them user friendly and environmentally safe.
RBI Shield I FI-FOIL
Fi-Foil’s RBI Shield (Reflective Bubble Insulation) is a multipurpose insulation for residential,
commercial and agricultural applications in roofs, floors and walls. RBI Shield is available in
double bubble and single bubble. The products are available in 16”, 24”, 48”, 66” and 72” widths,
in rolls 125’ long. RBI Shield is also available with an integrated tab. This option eliminates taping the seams. RBI Shield can also serve as a vapor barrier.
Retro Shield System I FI-FOIL
The Retro Shield System, developed primarily for the metal building industry, is the ideal solution for the retrofitting and upgrading of insulation systems in existing metal buildings.
The Clip & Pin components easily attach to the lip of the purlin to secure the reflective insulation. The result is a simple installation that greatly reduces expensive labor costs, but also
eliminates the need for additional framing or other alterations to complete the retrofit process.
Silver Shield I FI-FOIL
Fi-Foil’s Silver Shield a multi-layer radiant barrier. The inside layer is metalized PVC. The outer
layer is .000285” aluminum foil laminated with a fire retardant adhesive to 30 lb. natural kraft,
and is reinforced with a tri-directional fiberglass and polyester scrim. Silver Shield is intended
for use on the underside roof rafters. Silver Shield Radiant Barrier is perforated to allow vapor
transmission.
SPRAY APPLIED REFLECTIVE BARRIERS
Radiance™ E-0.25 Spray I BASF Spray Applied Reflective Barriers
Radiance™ E-0.25 is quick and easy to apply spray barrier that provides a number of cost benefits over other types of radiant barriers. The low material cost and ease of application reduces
labor. Radiance™ can be applied easily without the complexity of navigating difficult-to-access
attic spaces.
17
INSULATION ACCESSORIES
18
(952) 279.6400 • FAX (952) 279.6809 • TOLL FREE 800.678.6868
VENTILATION CHUTES
Cardboard Vent Chutes I OH SHUTES
Oh Shutes are cardboard ventilation chutes, waxed on one side, help keep air flowing up and
out through roof vents, protecting insulation and walls from moisture. They measure 24”x 50”
and come unfolded. 600 pcs per pallet.
Oh Shutes also offers a die cut chute with built-in stop, uncoated or with heavy wax coating
(for 24” framing only).
Corrugated Cardboard Vents
These corrugated cardboard vents are lightweight, easy to install and provide excellent air
flow.
raft-R-mates® I OWENS CORNING
Owens Corning raft-R-mates are extruded polystyrene foam vents designed for 24” on center
framing. They have an optional bend down air stop/insulation block to prevent loosefill insulation from blocking the soffits and it also stops “wind wash” from blowing insulation off the top
plate. The extruded foam will not crush or shatter like expanded foam (white) vents. They are
center scored to easily snap in two as needed.
AtticMate™ I OWENS CORNING
AtticMate vents are made from durable and break-resistant polystyrene sheets which are
formed to create an air channel that provides ventilation. They are vapor permeable, yet resist
moisture and will not rot or deteriorate. They install quickly and easily and are sized to fit 24
inch on center framing and can also be split to fit 16 and 12 inch o.c. rafter spacing. AtticMate
will provide in excess of a 1” air space and will maintain a free airflow channel from the soffit to
the ridge vent.
AccuVent® I BRENTWOOD INDUSTRIES
AccuVent effectively conducts air up from the soffit along the roof sheathing above the insulation. The chutes built in wind wash barrier keeps the soffit free from drifting insulation. AccuVent’s are made from 100% recycled flame retardant PVC and meet EnergyStar Thermal Bypass
requirements. Available for 16 or 24” on center framing for standard or cathedral applications.
Soffit blocks also available for spray foam applications.
19
POLY / CONSTRUCTION FILM
Construction Film
4 mil
8’4” x 100’, 9’4” x 100’
10’4” x 100’, 12’4” x 100’
16’ x 100’, 20’ x 100’
6 mil
8’4” x 100’, 9’4” x 100’
10’ x 100’, 12’4” x 100’
16’ x 100’, 20’ x 100’
Any size up to 24 feet available. Please call for quote.
FirePoly (Self extinguishing)
8’4” wide (100’ roll)
9’ wide (100’roll)
5’ wide (300’ roll)
AIR BARRIER / VAPOR BARRIER
Air Barrier / Vapor Barrier I LAMTEC
FS-25 (FSK) Lamtec vapor barrier facings
R 3035 4’6” wide standard width (300’ roll) flame rated both sides.
(Also available in 42”, 48”, 50”, 54”, 66”, 71”, 78” widths.)
R 3035 HD Heavy duty – All commonly used sizes readily available.
WMP-VR-R PLUS Polypropylene / Scrim / Polyester 42”, 54”, 66”, 78”, 84” widths
Polypropylene white film 0.0015 inch 38.1 micron. Flame resistant adhesive,
tri-directional fiberglass reinforcing Metallized polyester film
WMP-10 Polypropylene / Scrim / Kraft 42,” 54”, 66”, 78”, 84”, 90” widths (also available in
black) Metallized Polypropylene White Film 0.0015 inch 38.1 micron. Flame resistant
adhesive, tri-directional fiberglass/polyester reinforcing. Kraft white facing.
Air Barrier / Vapor Barrier I RUFCO & DURASKRIM
Perfect as an internal air barrier or an underslab vapor barrier, this poly is made of two-ply,
cross-laminated, high density polyethylene to ensure quality construction and energy savings.
Rufco Vapor barriers reduce moisture migration through underslabs and foundations, inner
walls and ceilings.
Available in white, 20’ x 100’.
· SS-300 to reduce moisture through walls, ceilings and underslab
· Duraskrim reinforced laminated poly, a heavier barrier to decrease
moisture migration through the underslab.
20
(952) 279.6400 • FAX (952) 279.6809 • TOLL FREE 800.678.6868
TAPES CAULKS AND SEALANTS
Tapes I 3M-VENTURE TAPES
As a distriputor of 3M tapes, IDI carries a large inventory of FSK, PSK and pure foil cold weather
tapes. Please call for sizes and pricing.
Spray Adhesives I RAMTACK AND 3M
These high-solids adhesives provides the maximum performance in an adhesive aerosol. The
heavy spray pattern is ideal for uneven or porous substrate bonding such as unpainted cinder
block or wood. This industrial-grade formulas provides waterproof and flexible bonds for even
the toughest jobs.
Expanding Foam Sealants I HANDI FOAM
When dispensed, this remarkable, single-component urethane foam is activated by moisture
in the air. It expands and cures to form a closed-cell foam that fills cracks and holes around
foundations, plumbing, wiring and window/door installations. It’s perfect for insulation touchups. It won’t shrink, dry out or become brittle with age. After it’s cured, it can be trimmed,
sanded and painted.
· Cylinders are not refillable
· Product Shelf Life: 1 year
· Available in 10 and 16 pound disposable cylinders.
Professional Expanding Foam Sealants I SOUDAL and DOW
America’s leading sealants for air-infiltration control, Soudal and Dow are remarkable urethane
products that interact with moisture in the air to expand and fill energy gaps. They can reduce
air infiltration by as much as 50 percent. The quick-cure formulas cures in less than one hour.
They seal out air, dust and moisture; solve problem pipe rattles; seal and insulate roof penetrations; eliminate condensation; seal around electrical outlets; insulate coolers and freezers
and support fiber glass tubs. They do not shrink, dry out or become brittle with age. Special
formulas are available for sealing either Gaps or Windows and Doors.
Caulks and Sealants I DAP AND MANUS
We carry the complete line of DAP caulks and sealants, visit www.dap.com for detailed information on their products. Manus 52A non-drying 100% butyl caulk is perfect for sealing poly
in air tight construction.on their products.
21
STAPLERS AND STAPLES
STAPLES FOR ARROW HT-50A AND 50 SERIES
A-11 3/8” Generic (staples)
STANLEY BOSTICH H30-6 I STAPLES FOR H30-6
STCR 2619 5/16” Generic (staples)
Stanley Bostich H30-8 I Staples for H30-8
Duo-Fast HT550 I Staples for HT550
508 1/4” Generic (staples)
5010 5/16” Generic (staples)
Rapid R-11 I Staples for R-11
A-11 3/8” (staples)
Rapid R-19 I Staples for R-19
A-19 1/4” Generic (staples)
Fits R-19 stapler only
PNEUMATIC STAPLERS
B&C Eagle Pneumatic Stapler I Staples for B&C Eagle
US 5016 LMA
US 7116 LMA
Use Senco C Series or Duo-Fast style staples
Senco (V10) 3/8” (staples)
Duo-Fast 5010 (staples)
Fasco Pneumatic Stapler I Staples for Fasco
F1B-7C16
F1B-5016
Use Senco C Series or Duo-Fast style staples
Senco (V10) 3/8” (staples)
Duo-Fast 5010 (staples)
22
(952) 279.6400 • FAX (952) 279.6809 • TOLL FREE 800.678.6868
SUPPORT SYSTEMS AND NETTING
Insulation Hangers - Hangers
Convenient for installing all insulations, particularly dense and puncture-resistant products
such as high-density fiber glass, styrene, urethane and cork, as well as coated fiber glass.
Also available with 90 degrees offset or peel and press pre-adhesived base.
Hanger Adhesive I TUFF BOND
This versitile hanger adhesive will hold tight from -30 to 250 degrees F.
1 gallon is enough to install from 500 to 800 adhesive anchors.
Insulation Netting - Blow-in Netting and fabric
Maybe used to support insulation under floor, overhead in vaulted ceilings or tuck-under
garages.
1/6” Net for Sidewall
1/4” Net for Ceiling or Sidewall
1” or 2” Net for Batt Support
8” netting has been C-folded onto 4’ cardboard tubes for your convenience. The 1/6” and
1/4” nettings listed above are the original B.I.B.’s nettings HIgh strength fabric keeps down
dust for a cleaner application. 9’widths.
- Call for pricing -
Batt Insulation Supports - 13 Guage Tension Wire
Sharp Points - Hold Tight - Cut for 16’ on center joists and 24” on center joists.
on their products.
ACCESSORIES
Mark II Hose I FLEXAUST COMPANY
Crushproof durability results from an exclusive two-piece construction of premuim grade
copolymers. Mark II hose features an especially abraision-resistant crown and translucent
walls for easy monitoring fo material flow. Mark II is fast becoming the industry standard
for all-prupose insulation blowing hose.
Available in six sizes: 1 1/2”, 2”, 2 1/2”, 3”, 3 1/2”, and 4”
Hose Reducers & Connectors - Welded Steel Construction
Hose Connectors Available in
2”, 2 1/2”, 3”, 3 1/2”, and 4” sizes.
Reducer Connectors Available in:
4” to 3 1/2”, 3 1/2” to 3”, 3” to 2 1/2”, 2 1/2” to 2” and 4” to 3”
Hose Clamps - Steel Clamps
These steel clamps with worm drive will adjust to fit 2”, 2 1/2”, 3”, 4” connectors.
Swivel Wall Nozzle - 360 Degrees Swivel Nozzles
Great for blowing glass.
Wall Nozzles - Nozzles
We carry various sizes and types of nozzles and adapters to choose from. Their design
with solid steel or alluminum construction make them an excellent buy.
23
INSULATION ACCESSORIES MISC.
Drill Bits - Lenox, High Speed Carbide, Stucco and Wood Bits
Available in all sizes - Call us!
Drill Bits - Relton Bits
Plugs - Wood and Foam
Plastic, Regular & Long Flange
Adjustable Heights Stilts I DURA-STILT III
These adjustable height stilts are top of the line from Dura-Stilt Corporation. Spring tension
individually adjustable for natural leg movement to give exactly the right “feel”. Telescoping
legs slide smoothly for quick and easy adjustment without tools.
Insulshield I J&R PRODUCTS
Lightweight aluminum material, Insul-Sheild is your best protection against fire from heat
build-up from insulating over or too close to recessed lights and other heat-producing fixtures.
Measures 14” high and 24”long. Each roll makes about six to eight shields. Installation is
quick, easy and safe to use with cellulose, fiber glass and rock wool insulation.
Tenmat
TENMAT Downlight Protection Covers are made out of fire safe mineral wool and compatible
with sprayed foam insulation, low density foam, blown-in insulation and lay-in insulation.
They keep flammable insulation at a safe distance from hot recessed lights, reduce heat loss
and prevent insects from entering through the light.
Superkut Batt Knife
The Superkut knife is specifically designed for insulation, this contractor-grade cutting
tool compresses the material so a special blade can make superior cuts in one stroke.
Producing less fatigue on wrists and hands and reducing the amount of material waste,
this product is an important tool for anyone working with insulation.
Retractable Utility Knives & Blades
We also stock standard retractable blade utility knives and replacement blades.
24
(952) 279.6400 • FAX (952) 279.6809 • TOLL FREE 800.678.6868
INSULATION EQUIPMENT
INSULATION MACHINES
Insulation Machines
IDI sells over 100 different insulation machines, from small, portable electric powered
blowers to large, truck mounted blowers that are powered by gas, diesel or your vehicles
power take off unit.
These machines all operate with air lock systems, which is the most important part of
a high production insulation machine. The airlock is the key component of the entire
system, because the larger the airlock, the more production is possible. IDI also handles
insulation removal vacuums that can quickly remove insulation for recycling or efficiently
remove damaged insulation.
We have specific units that are made to handle whatever type of insulation that you are
installing or removing. Give IDI a call and we’ll assist you in selecting the perfect machine
to help you do a fast, professional job so you can increase your production and your
profits.
Pumps
This MP-20 unit consist of a high quality, double belt-driven pump with a 1 HP TEFC
motor which offers easy, reliable operation and is ideal for the professional contractor.
Delivers 5.7 GPM @250 PSI. Weighs 82 pounds
Stud Scrubber
The Krendl Stud Scrubber is used to remove excessive spray-on cellulose insulation between wall studs allowing for easy installation of drywall. 1/8 HP TEFC motor, belt driven
scrubber with tensioner. Aluminum frame construction for lightweight and corrosion
resistance. A 27” wide scrubber x 26” long frame for use on 24” centers. Also available in
18” width for 16” on center studs in closets or congested areas
25
MOBILE SPRAY RIGS
16 Foot Bumper-Pull Trailer
Economy starter rig without sacrifice. Designed for urethane foam insulation applications.
Features Include:
·
·
·
·
·
·
·
·
·
·
·
·
8.5 ft. wide, 7.5 ft. interior height, twin 5,000 lb. axle
Graco E-20 Reactor w/ circulation kit
Graco T:1 Feed Pumps
Two Graco Fusion AP Guns (other models available)
17.5 kW gasoline or 20 kW diesel generator installed in “Dog House”
3.5 HP C-Aire compressor
Twin Barrel Brace to hold two sets of material
48” curb side door w/ hose hatch and rear ramp door
Urethane foam insulation sprayed in walls and ceiling.
160 ft. heated hose standard
Work bench w/ vise, blow gun and overhead cabinet
3-stage Desiccant DryAire System
20 Foot Bumper-Pull Trailer
:
Has the room and payload for almost every application while still in a small enough package
to easily maneuver around job sites.
Features Include:
· 8.5 ft. wide, 7.5 ft. interior height, twin 7,000 lb. axle
· Choose from a variety of Graco spray
l and
s equipment, including electric, hydraulic,
·
·
·
·
·
·
pneumatic Reactors
20 kW and 40kW generators (larger sizes available in custom applications)
Choose from a variety of piston and screw compressors to meet your air needs
Urethane foam insulation sprayed in walls, ceiling and floor
Work bench with vise, blow fun, grinder, overhead aluminum cabinet w/light and six
drawer tool box
28 Foot Goose Neck Trailer
Longer goose neck provides added payload, additional room for more barrels and the better
pulling of a gooseneck trailer.
Features Include:
· 8.5 ft. wide, 7.5 ft. interior height, twin 8,000 lb. axle
· Choose from a variety of Graco spray equipment, including electric, hydraulic, and
·
·
·
·
·
·
26
pneumatic Reactors
Triple Barrel Brace to hold two sets of material
Urethane foam insulation sprayed in walls, ceiling and floor
drawer tool box
Epoxy floor coating in utility room
(952) 279.6400 • FAX (952) 279.6809 • TOLL FREE 800.678.6868
MOBILE SPRAY RIGS
Box Truck
Box Trucks provide big payload in small packages that are easy to manuver at any job site.
We can perform a custom installation in your box truck.
Features Include:
•
Choose from a variety of Graco spray equipment, including electric, hydraulic, and
pneumatic Reactors
•
•
•
White board walls and ceiling, with white aluminum trim accent for a professional fit
and finish
•
Twin or Triple Barrel Braces available depending on length and rating of truck
•
Urethane foam insulation sprayed in walls and ceiling
•
drawer tool box
•
Epoxy floor coating in utility room.
•
Diamond plate floor in spray room
And much more!
:
AiMS Advanced Intergrated Mobile Spray System
The new AiMS trailer series offers the same performance as our 20 and 28 foot turn-key trailers
in a smaller, more compact package. AiMS trailers come complete with everything you need
to get started and keep going. Everything is included up front....no nickel and dime later.
Features Include:
•
Graco 22kW generator. Smaller tosreduce fuel consumption
•
Rotary vane air compressor providing 19.5 SCFM of air on demand
•
Fully insulated with dividing wall separating the utility room from the material and
reactor
•
Gull wing doors
•
Integrated reactor
•
Monitoring window to monitor controls with out opening the exterior door
•
Time saving sliding hose wrap
•
Hose hatch in door
•
Holds 2 full sets of A and B materials (4 drums)
•
Weighs under 10,000 lbs. GVW fully loaded
l
27
LOW PRESSURE SPRAY FOAM SYSTEMS
Froth Pak™ I DOW
FROTH-PAK™ Foam Insulation is a two-component, quick-cure polyurethane foam that fills
cavities, penetrations, cracks and expansion joints. Unlike one-component foam, FROTHPAK™ Foam Insulation is chemically cured foam, significantly reducing curing time. FROTHPAK™ Foam Insulation dispenses, expands and becomes tack-free in seconds.
FROTH-PAK™ Foam Sealant fills cavities, penetrations, cracks and expansion joints and can
also be used as a sealant and void fill in many roofing applications. FROTH-PAK™ is chemically cured foam, which significantly reduces curing time. FROTH-PAK™ dispenses, expands
and becomes tack-free in seconds. It skins over in 30-40 seconds and completely cures in
minutes, depending on temperature.
Available in kits to cover either 200 or 620 board feet.
FROTH-PAK™ Refillable Tanks: The FROTH-PAK™ refills are heated tanks, because an even,
controlled temperature is crucial for the production of quality polyurethane foam. FROTHPAK™ refills are designed to always keep polyurethane foam at a consistent temperature
:
from the tank right to the point of application. The refills are available in either 17 gallon
or 27 gallon tanks.
Spray Polyurethane Foam I HANDI FOAM
Handi-Foam® E84 Class 1 Spray Foams are chemically cured systems and the cure process
occurs very quickly - generally within minutes. Due to their excellent adhesion properties
they provide excellent insulation by creating a continuous air barrier that completes the
building envelope. This helps to improve indoor air quality, lowering heating and cooling
costs and drastically reduce energy consumption. Handi-Foam E84 Class 1 assists in attaining ENERGY STAR® rating and/or LEED credits.
E84 System: Handi-Foam® Spray Polyurethane Foam is designed to fill and insulate large
voids and surfaces. Handi-Foam is available in a variety of board foot sizes from 105 up to
605 board feet of coverage. Due to its excellent adhesion properties, it provides excellent
insulation by creating a continuous air barrier that completes the building envelope. This
helps to improve indoor air quality, lowering heating and cooling costs and drastically
reduce energy consumption. Handi-Foam is dispensed using the patented Handi-Gun®
Dispensing Unit for accurate and precise application. Handi-Foam is GREENGUARD Gold UL
Certified for low emissions.
Magnum Refillable Tanks: The Magnum Heated System® is designed for use with the
Handi-Foam® Spray Foam and Handi-Flow Pour-in-Place Refill Systems. Because temperature has such an impact on the quality of polyurethane foam, Magnum was designed to
keep polyurethane foam at a consistent temperature at all times, from the tank to the
point of application. The system includes the 150’ heated hose. Refillable foam tanks are
returned to Fomo for recycling and redistribution after use. Available in 17 gallon or 27
gallon refillable tanks.
28
(952) 279.6400 • FAX (952) 279.6809 • TOLL FREE 800.678.6868
ACCESSORIES
FRESH AIR SYSTEMS
Full Mask Low Pressure System 9210-02
This full mask 2-man system provides a portable air source for two respirator users. It
includes two full mask supplied air respirators, a 3/4 hp. pump and 100 foot breathing
air hose.
Also available in a one and three mask system
Maintenance Free Tyvek ® Hood
This NIOSH-approved maintenance free Tyvek hood is designed with the breathing or
down tube and head suspension completely integrated, so that the hood assembly is
constructed into a one-piece instead of the standard three-piece assembly. Offered in
poly-coated DuPont Tyvek®, it is flexible, splash resistant and seals in the air flow and
meets stringent NIOSH requirements for sound levels inside a hood. The disposable hood
brings air down across the lens which minimizes fogging and brings air to the breathing
area. The disposable one-piece suspension offers easy adjustment with a hook and loop
closure and an absorbent foam headband. NIOSH approved.
Wall Air Filtration / Carry Air™ Filtration Panel
Allegro’s wall filtration panel converts shop air used for pneumatic tools and equipment to
clean breathable air.
Both air filtration panels have 3-stage filtration systems that purify compressed air, removing water, oil and particulate contaminants. They provide 2 airline respirators a source of
up to 30 CFM of breathable air. Their pressure regulators include a pressure gauge and
adjustment knob with locking ring. The carbon monoxide monitor can be operated in AC
or DC mode, activates an audible alarm when the concentration of CO exceeds 10 ppm.
A pressure relief valve protects the CO monitor and respirators in the event of regulator
failure. Meets NIOSH requirements for point-of-attachment.
l
Allegro’s portable air filtration panel is an easy to carry solution. Its AC/DC-powered unit is
housed in a rugged Pelican case for portability and protection.
Air Bag 12
All in one unit for ease of operation. Featuring a 12” metal blower system with 15’ duct
built into a heavy duty polyester bag. Polypropylene nine blade fan, steel/powder coated
housing and grill, carry handle with molded-in 2 speed switch. 60 Hz 3.8 Amps, 2 speed
on/off switch. Ducting: Single-Ply lightweight vinyl/polyester PVC coated. Yellow with
black wear-strip and integrated nylon attachment strap on one end.
Dimensions: 28”l x 16”w x 14”h Free Air (high speed) 1840 CFM 35 lbs. 1/2 hp. 120V AC
Vortex Cooling/Heating Vest
Delivering constant and adjustable cooling or heating, the Vortex Vest is especially popular
for workers in confined spaces. With no moving parts, the vortex tube forces a simple heat
exchange to separate compressed air into hot and cold airstreams.
29
ACCESSORIES
SAFETY ACCESSORIES
Coveralls
Heavy duty disposable coveralls resist tears or punctures and stay tough wet or dry. Full cut
allows coveralls to be worn comfortably over clothing for a variety of jobs. Fabric is a
spun-bound fiber. Zip front with a collar.
Also available: Light Polypropylene disposable coveralls with hood and boots.
Sold as a 25 quantity case.
Head Sock
Head Sock (Painter’s Spray Sock),
Cotton Blend
Sold in box of 12
Dust Mask - 8210 Disposable I 3M
:
Think Safety!
Wear dust masks when installing all types of blown insulation. 3M’s 8210 is low in cost and,
with its adjustable nose clip and elastic headband, is design to fit anyone.
20 per carton, 160 per case.
Dust Mask - 8511 Disposable with Exhaust Valve I 3M
l
s featuring the proprietary 3M™ Cool Flow™
2-Strap, disposable N95 particulate respirator
Valve that improves comfort, is longer lasting and easy to talk through. This respirator with
its patented Exhalation Valve is ideally suited for work settings that involve heat, humidity, or
moisture control in cold climates, and is ideal for extended periods of wear.
20 per carton, 160 per case.
Disposible Gloves - 3 options
Vinyl Gloves, Lightly Powdered, Large (100/Box; 10 Box/Case)
Blue Nitrile Gloves, Powder-Free, X-Large (100/Box)
Blue Nitrile Gloves, Powder-Free, 8mil./12”, X-Large (50/Box)
String Knit Blue Latex Gloves
Gloves, String Knit Blue Latex Coated, (20 Pair/Case)
Nitrile Coated Nylon Gloves
Gloves, Nitrile Coated Nylon, Gray Palm on White, Med. (12 Pair/Bx, 12)
Brown Jersey Cotton/Poly gloves
Gloves, Brown Jersey, Cotton/Poly, Knit Wrist, Men’s (25 Pair/Case)
30
(952) 279.6400 • FAX (952) 279.6809 • TOLL FREE 800.678.6868
SHELVING & STORAGE
STORAGE SOLUTIONS
LAMINATE SHELVING
Storage Solutions for Home and Business
FreedomRail Laminated Shelving is:
• Fully adjustable - components can move up,
down and side to side at any time
• Built strong for active families
• A complete solution for
throughout the home
• Offered in 9 unique colors
and finishes
:
s
l
VENTILATED SHELVING
Storage Solutions for Home and Business
Lifetime Ventilated Shelving is/has:
• Made with 30% more steel than other shelving
• Epoxy powder coated is environmentally friendly
• Installed with patented hardware to hold
50% more weight than other systems
• More durable coating than other
leading brands
• Stronger anchoring system than
other leading brands
• Guaranteed to last a lifetime
• Functional
• Made in the U.S.A.
White
Coated
Nickel
Coated
31
FIREPLACES
Vent Free Fireboxes I SUPERIOR
Superior Fireplaces Vent-Free gas fireboxes offer a beautiful, traditional fireplace setting for
either indoor or outdoor installations at an attractive price. The Traditional series fireboxes are
available in four choices, the Merit, Pro, Custom, or Signature line and the sizes range from 32
inches up to 50 inches, so you can select the fireplace that best suits your home environment.
Both louvered and flush face circulating styles are available. Simply combine a cabinet mantel
or gas log set.
Vent Free Gas Logs I SUPERIOR
Realistic dancing yellow flames are achieved by adding our vent-free split oak gas log set.
Direct Vent Fireplaces I SUPERIOR
The Merit® Series louverless direct-vent (MLDVT) gas fireplaces deliver the clean, elegant
presentation of a true louverless design. Inside, the highly efficient fireplaces produce tall,
dramatic flames and a warm ember glow at very low BTUs, reducing energy consumption and
costs without sacrificing fire quality.
Wood Burning Fireplaces I SUPERIOR
The Merit and Pro series of Superior Fireplaces wood burning fireplaces range in size from 36
inches up to 42 inches so you can select the fireplace that best suits your home. Both louvered
(circulating) and smooth face (non-circulating) styles are available, as well as, the option for
full insulation. Uses an 8” wood burning pipe system.
32
(952) 279.6400 • FAX (952) 279.6809 • TOLL FREE 800.678.6868
FIREPLACES
Direct Vent Fireplaces I MONESSEN
Direct Vent appliances draw combustion air from the outdoors as well as exhausting to the
outdoors using a pipe venting system finished on the exterior with a vent cap. Direct Vent appliances are often vented up through the roof or out to the side or back of the building.
The Direct Vent models come with gas log sets
Vent Free Fireplaces I MONESSEN
Vent free hearth systems operate without an exterior venting system. They draw combustion
air from inside the home and are designed to burn so efficiently (up to 99.9%) as to eliminate
the need for venting. You can also add the Vent Free Gas Log Set listed below.
Vent Free Gas Logs I MONESSEN
These log sets feature burners with flames in the front and rear, adding warmth with a remarkable 99% efficiency rating, Monessen vent free gas log sets provide optimum fuel savings.
EYF burner - Includes volcanic rock - Detailed log design - Available in millivolt and manual
control
33
Nationwide Locations
Job-Site
and
Warehouse
Delivery!
MINNESOTA
Corporate
Headquarters
CHANHASSEN
952-279-6400
ALABAMA
BIRMINGHAM
205-942-6203
THEODORE
251-443-6577
ARIZONA
PHOENIX
602-283-1078
CALIFORNIA
ONTARIO
951-682-0809
SACRAMENTO
916-371-8446
SAN FRANSISCO
415-432-3999
COLORADO
DENVER
303-377-4430
FLORIDA
JACKSONVILLE
904-224-0192
MIAMI
561-844-4277
TAMPA
813-621-2898
GEORGIA
ATLANTA
404-350-8607
ILLINOIS
CHICAGO
847-697-0044
KANSAS
LENEXA
913-859-9655
NEW YORK
NEW YORK
631-946-3428
KENTUCKY
LOUISVILLE
502-479-6148
NORTH CAROLINA
MORRISVILLE
919-287-3921
LOUISIANA
HAMMOND
985-340-8055
OHIO
CLEVELAND
440-234-6622
MASSACHUSETTS
BOSTON
508-339-1219
MISSOURI
ST. LOUIS
314-291-4500
OKLAHOMA
OKLAHOMA CITY
405-789-3375
TULSA
918-294-0255
OREGON
PORTLAND
503-608-3142
Family Owned
and
Operated Since 1979
1-800-678-6868
[email protected] • www.IDI-Insulation.com
PENNSYLVANIA
BETHLEHEM
610-391-0540
TENNESSEE
GOODLETTSVILLE
615-859-9839
TEXAS
AUSTIN
512-467-9200
DALLAS
972-352-2861
HOUSTON
713-462-3792
SAN ANTONIO
210-678-4503
UTAH
SALT LAKE CITY
385-235-7888
VIRGINIA
RICHMOND
540-752-9713
WASHINGTON
SEATTLE
253-478-4301
WISCONSIN
HARTLAND
262-367-3200

Fiberglass • Blowing Wool Spray Foam Rigs • Spray Foam

Transcription

Similar documents

Jetons De Poker Ceramiques Casino Replica

protect - Steico

Reliability - Comparato Nello srl

universal

BuildTog Flyer

Compact Horizontal Packaged Unit

Astro-Foil RI bro

MATERIALS AND METHODS INTRODUCTION AND GOALS Case

Polyisocyanurate Pipe Insulation

Earthwool Leaflet