Click Here to product catalog

Transcription

A Brief History
In its early years, our firm operated greenhouses in Ancaster,
Ontario and pioneered commercial production of vegetables
using soilless media. As the practice of growing without soil
evolved, the greenhouse landscape changed and growers
experimented with substrates ranging from pebbles to peat,
sawdust to perlite, NFT to rockwool. During these years, CHL
transitioned from plant production to greenhouse supplies and
further to greenhouse systems.
Today, as a full line distributor, we represent a great number of
quality greenhouse product lines from worldscale
manufacturers. We have become a major player in a vibrant
and technologically advanced horticulture industry, which
enjoys an enviable reputation here at home and around the
world. Our customers are knowledgeable men and women,
many 2nd and 3rd generation participants, earning their living
as growers and independent business owners.
We are proud to be part of the collective effort and process that
defines the horticultural segment of Canada's sizeable
agricultural industry. In the pages of our new catalog that
follow, it is our sincere hope that you continue to find materials
and equipment that will help you grow your crops as efficiently
and as bountifully as possible. Your success is our success. If,
at the end of each season, your experience with us has been
rewarding, we are accomplishing our goal of contributing
positively to your well-being.
We wish you success, on-going. We truly thank you for your
past patronage and we pledge our continued best efforts to
earn our keep as a trusted supplier.
Sincerely
OUR STAFF IS HERE TO HELP YOU!
Back: - Irene Gaerdes - Receptionist, Jim Wiersma System Sales & Installations, Kevin Johnson - Warehouse
Manager, Al Pender - Grower Sales Representative, John
Stevens - President, Nick Wilson - Retail Sales
Representative
Front - Elaine Sharp - Inside Sales and Promotion, Randy
Hartog - Grower Sales Representative, Chris Gordon Receptionist, Lionel Costa - Leamington Grower Sales
Representative
Absent: - Myrna Japay - Accounts Receivable and Payroll,
Sheila Ripson - Accounts Payable, Louise Stewart - Inside
Sales and Purchasing, Don Clark - Truck Driver, Bill Straver
- Horticultural Advisor
CANADIAN HYDROGARDENS LTD.
John Stevens
President
1386 Sandhill Drive, Ancaster, ON L9G 4V5
Tel: (905) 648-1801 • Fax: (905) 648-1870
Order desk: 1-800-893-4769
Email: [email protected]
1-800-8WeGrow
ABOUT US
Conditions of Sale
Your order and subsequent acceptance of goods shall
constitute agreement with the following terms and conditions.
Terms
Terms are NET 30 days from shipping date with approved
credit; payment with order if credit has not been established.
Overdue accounts are subject to a finance charge of 1.5% per
month (18% per annum).
Return Goods
No merchandise may be returned without authorization from
our office ahead of time. A restocking charge will be charged
unless goods are defective or there are special circumstances
and prior arrangements have been made to waive or reduce
this charge. The 20% re-stocking charge applies to inventory
items. Custom orders are not returnable.
Taxes
G.S.T. and P.S.T., if applicable to the goods or to your location
respectively, will be added to the invoice unless valid proof of
exemption is furnished with order or is on file with us.
Ordering Information
Order desk, call TOLL FREE 1-800-893-4769 (1-800-8We
Grow) from area codes 416, 905, 519, 705 and 613. Customers
outside these dialing areas or for customer inquiries related to
ordering information, please dial 1-905-648-1801. You can also
order by fax at 1-905-648-1870 or by email to
[email protected]. (Customers are kindly urged to
order goods by 3 pm the day before delivery or we cannot
guarantee delivery.)
Delivery/Shipping
Outside our normal delivery area, a delivery charge will apply if
delivered by our truck. If shipped common carrier, including
out of province shipments, the order will be sent freightprepaid-and-add unless otherwise advised. CHL will arrange
the best and least expensive way for all shipments, based upon
the size and weight of your order and transportation service
available to your area. Out of country shipments will similarly
be forwarded by whichever mode of transport attracts the
lowest cost consistent with your stipulated "required date".
Other Notes...
Recommendations
Recommendations made by our staff are given in good faith
and are based on documented research and empirical findings
from reputable sources. Information is conveyed without
liability in an effort to be helpful. There is no, nor could there
be, any representation with respect to crop performance or
yield, sales volume or sales revenue. You ultimately are
responsible for your crop. You or your designate live and work
with your crop day to day. If you do not, you will not be a
successful grower and we will not be your scapegoat. If you
therefore are, or plan to be, an absentee grower/manager, we
respectfully suggest that you seek other commercial
opportunities.
Technology Implementation
We continue to work towards increased use of technology to
liberate staff from the burden of paper-driven tasks so that they
can concentrate on serving customers. To this end, we are
constantly upgrading our inventory control system to reduce
incidences of back order and to equip us to answer stock
position and price inquiries over the phone. We believe that
small improvements such as these are important in sustaining
customer satisfaction and loyalty, and in enhancing
technological implementation going forward.
Canadian HydroGardens Ltd. (CHL) will deliver within a radius
of 125 km of Ancaster. Minimum order of $400.00 will apply.
Our delivery trucks run on the following schedule:
Monday:
Waterdown, Burlington, Milton, Oakville, Toronto, Bradford, etc.
Tuesday:
Niagara Peninsula area including Stoney Creek, Grimsby,
Beamsville, Jordan, St. Catharine's, Niagara-on-the-Lake,
Welland, Virgil, etc.
Wednesday:
Waterdown, Burlington, Milton, Oakville, Toronto, Bradford, etc.
Thursday:
Ancaster, Brantford, Copetown, Delhi, Dundas, Paris, Scotland,
Simcoe, Waterford, London, St. Thomas, Norwich, etc.
Friday:
Niagara Peninsula area including Dunnville, Lowbanks,
Wainfleet, Port Colbourne, Binbrook, Caistor Centre, Selkirk,
etc.
CONDITIONS OF SALE
Colour-Coded Catalogue Sections
1.
Company Info & Index
2.
Plant Protection:
8.
Irrigation:
• Miscellaneous Irrigation
• Drip Irrigation
• Overhead Irrigation
• Insect traps
• Filtration
• Biological Control
• Controllers
• Pesticide Schedule
• Turf Irrigation
• Fungicides
• Insecticides and Miticides
9.
Heating:
• Growth Regulators
• Herbicides
• Modine Heaters
• Miscellaneous
• Lennox Heaters
3.
Greenhouse Sanitation
4.
Seeds
• Heating Cables
• Poly Duc Vent Tubing
10. Equipment & Structures
• Argus Control Systems
5.
Fertilizers:
• Wadsworth Controls Systems
• Timers
6.
• Single element Fertilizers
• Thermostats
• Acids
• Fans & Shutters
• Blended Fertilizers
• Greenhouse Fogging/Humidification
• Slow Release Fertilizer
• Security & Monitoring
• CO2 Monitoring & Generators
Growing Media:
• Greenhouse Lighting
• Premier Promix & Peat Mosses
• Hanna Instruments
• Grodan Rockwool
• pH, EC Controllers
• Other Substrates:
• ZENON Water Systems
Pargro Rockwool
• Bellows Metering Pumps
Coconut/Coir
• Mag Drive Pumps
Vermiculite/Perlite
• Infrared Thermometers
• Scales
7.
Growing Accessories:
• Clips, etc.
• Masks
• Hooks
• Cuke wrap
• Shade paint
• Containers
• Anderson Injectors
• Dosmatic Injectors
• Fertigation Accessories & Tanks
• Trojan Water Sterilizers
• Greenhouse Film & Accessories
• Ground Cover
• Rovero - Roll-Air Greenhouses
• Energy Curtains
SECTIONS
Insect Traps
These traps can be used to monitor insect populations or
collect insects in hot spot areas. Yellow or blue traps are
available. Use approximately one card per 1000 sq.ft.
Sticky Strip
Colour
Size
Quantity
Product No.
CHL Item No.
Yellow
3" x 5"
100/pk
100-SS-35
800200
Yellow
6" x 12"
10/pk
10-SS-612
800202
Yellow
6" x 12"
50/pk
50-SS-612
800204
Blue
3" x 5"
100/pk
100-BSS-35
800208
Sticky Ribbon
- Individual Strips, Coated on One Side
Colour
Size
Quantity
Product No.
CHL Item No.
Yellow
2" x 530'
1/pk
PCR530
800305
Yellow
1 3/4" x 27'
50/pk
50-SR-27
800401
Blue
1 3/4" x 27'
50/pk
50-BSR-27
800402
Greenhouse Screening
Screening your vents helps to exclude
insects from your greenhouse. Advantages
to screening include reduced need to spray
and reduced exposure to pesticides. It can
reduce the risk of insect-transmitted
disease by excluding such insects as
Thrips, Whiteflies and Cucumber Beetles.
Insect Barrier
Insect barrier is a long-life plastic filter (7 micron), 3/8" thick,
with a net backing and fibre face. Use it over vents, shutters or
cooling pads. Resistance to airflow is less than 0.1 W.G. static
pressure at 1250 cfm. It keeps insect pests out and beneficial
insects in.
Given the increased problems and costs associated with
pesticides, no modern greenhouses should be without the
proper insect barrier. Green-Tek Insect Screens, correctly
installed, prevent insect penetration, yet provide maximum
possible air flow, essential for optimal crop yields.
Regardless of the cooling and ventilating system that you use,
you need to consider insect screen. Screening intake vents
will produce dramatic results, but all greenhouse openings,
including service doors (which should incorporate double
screened doors), should be screened for best results.
ANTI-VIRUS Insect Screen excludes Whitefly, Aphids,
Leafminers and up to 80% of Western Flower Thrips in field
applications. Several years of laboratory and field testing have
resulted in a patented screen structure that maximizes air
circulation, while keeping pests out. Special equipment has
been developed to ensure hole size accuracy, and a 0.24 mm
diameter yarn is used, which is 45% stronger with greater UV
resistance, compared to 0.20 mm diameter standard yarns.
NO-THRIPS Insect Screen is designed to exclude Thrips and
other pests, and is the material of choice where Thrips
exclusion is priority.
ANTI-VIRUS AND NO - THRIPS
INSECT SCREEN SELECTION CRITERIA
Insect Pest to
be Excluded
Insect Size
- Inch (microns)
Screen Type
to Use
Screen Hole Size
- Inch (microns)
Leafminer
0.025 (640 microns)
Anti-Virus
0.0105 x 0.0322
(266 x 818 microns)
100%
Melon Aphid
0.013 (340 microns)
Anti-Virus
0.0105 x 0.0322
(266 x 818 microns)
100%
Whitefly
0.018 (462 microns)
Anti-Virus
0.0105 x 0.0322
(266 x 818 microns)
100%
Western
Flower Thrips
0.0075 (192 microns)
No-Thrips
0.0059 x 0.0059
(150 x 150 microns)
100%
7' x 100' rolls............................................CHL Item No. 800500
INSECT SCREENS
ANTI-VIRUS AND NO-THRIPS
INSECT SCREENS
Performance
Technical Description
v Made of high tensile-strength round
polyethylene monofilaments.
v Lightweight and easy to install.
v Strong woven and tucked in selvages even if mechanically punctured, the screen
will keep its strength and stability.
v UV stabilized.
v Transparent
v Unique structure results in maximized air
circulation, to enable higher yields.
v Easily cleaned with power sprayers by
back flushing.
SPECIFICATIONS
ANTI-VIRUS
NO-THRIPS
Construction
50 x 24 mesh
81 x 81 mesh
Opening Size
0.0105" x 0.0322"
0.0059" x 0.0059"
Thread Size
.24 mm
.15 mm
Weave
1/1
1/1
Weight
0.33 lbs/yd2
0.216 lbs/yd2
Shade Value
20%
33%
Light Transmission
80%
66%
Standard Width
43, 78, 118, 137 inches
Custom Widths also available.
39 and 78 inches
Custom widths also available.
Length
Special order 59 and 94 inches.
Orders cut to size.
Orders cut to size.
Tested to equivalent of five
years field experience.
Tested to equivalent of three
years field experience.
UV Resistance
Installation
Installation
1.
Check that the frame, structure or wall to which the insect
screen will be fastened is as square as possible, to
eliminate twisting or shortage of fabric.
4.
2.
Metal parts should not touch the screen. In the summer,
heat accumulates in metal parts, and might damage the
plastic screen. Therefore, it is important to cover metal
parts with white water based latex paint or white tape to
protect the screen.
3.
When you install the screen, keep the screen square and
parallel to the sides of the greenhouse. This will keep the
fibers of the screen parallel. If the fibers are not parallel to
the greenhouse sides, the screen will be shortened in
length and in width.
When you install several screens together which have not
been stitched, you should connect the first screen to the
sides of the greenhouse. Then, connect the second
screen to the first one and to the greenhouse sides.
Continue in that way until the entire greenhouse is
covered.
INSECT SCREENS
Biological Control
Aphid Control
Aphidius colemani
Bumble Bees (Natural Pollination)
Most tomato and pepper
growers are now using
bumble bees to pollinate
their plants.
The new
bumble bee hives have an
automatic feeding system,
making them essentially
maintenance free.
Advantages:
- pollination 7 days a week
- no requirement for special environmental conditions
- no staff training
- improved fruit shape and enhanced yield
Beneficial Insects
Beneficial insects are fast gaining popularity
with greenhouse growers around the world.
Biological control offers savings to the
grower through reduced labour and
pesticide costs. Growers using biological
control instead of chemical control can market
their product as "insecticide free" and command a higher price.
This is a black parasitic wasp that
parasitizes Cotton Aphid and Greenpeach Aphid.
Use when aphid
infestations are beginning.
The
parasitized aphid swells and hardens
into a leathery grey/brown coloured
mummy. The adult parasitic wasp
emerges through a round hole at the
rear of the mummy. The first mummies
can be seen in the crop approximately 2
weeks after the first introduction. Temperature should not be
greater than 30°C. Spread material on rockwool slabs or in
application boxes.
500 CHL Item No ............................................................810103
Aphidius Ervi
This is a black parasitic wasp that
parasitizes Cotton Aphid and Greenpeach Aphid.
Use when aphid
infestations are beginning.
The
parasitized aphid swells and hardens
into a leathery grey/brown coloured
mummy. The adult parasitic wasp
emerges through a round hole at the
rear of the mummy. The first mummies
can be seen in the crop approximately 2
weeks after the first introduction. Temperature should not be
greater than 30°C. Release parasitic wasps between the leaves
in the morning or evening.
250 CHL Item No ............................................................810118
Beneficial insects do work! If introduced at recommended
rates and managed properly, they serve as an unbeatable
method of pest control in the greenhouse.
1000 CHL Item No ..........................................................810119
Canadian HydroGardens Ltd. distributes biological control
agents and bumble bees produced by Biobest Biological
Systems.
A fragile gall midge with long legs. For
use on a wide range of aphid species.
Recommended when aphid colonies
are present. Adult gall midges are
active at night and are attracted to aphid
colonies by the smell of honeydew.
Eggs are deposited in the aphid
colonies. Larvae paralyze the aphids
and suck out their contents. Night
temperature must be above 16°C for
egg laying to occur. High relative humidities give better results.
Aphidoletes pupate in the soil. When the soil is covered with
plastic, population build up cannot take place. Place material
in piles of 10cc on the rockwool opposite the dripper or in a
humid place on the ground. The material must be introduced
weekly until control is achieved. Protect against ants.
Release rates for each beneficial insect are based on the area
of the greenhouse. However, these rates may vary from one
application to another depending on the level of infestation.
Pricing of beneficial insects is volume dependent.
inquire for pricing.
Please
Important Ordering Details
Biobest biological insect orders must be received by Thursday
at 12:00 noon and will be delivered by courier the following
Tuesday or Wednesday. Bumble bees can be shipped on
Mondays, Tuesdays and Wednesdays for one to two day
delivery depending on area.
Aphidoletes aphidimyza
1000 CHL Item No ..........................................................810101
BIOLOGICAL CONTROL
Aphid Bank
Hypoaspis Miles
A banker plant system
consisting of a box
containing growing barley
shoots with approximately
500 grain aphids as starter
food supply for Aphidius
spp. This system is
effective below 30°C. On
each aphid bank a large
population of aphidius will
form. The aphidius that
emerge from the banker
plant system will actively
search for aphids in the
crop. The result is that
aphid infestation levels
remain low in the crop due
to the continuous presence of large quantities of aphidius in
the greenhouse. Low maintenance and very efficient when set
up in a hanging basket and provided with a dripper.
Hypoaspis adults and
larvae eat all stages of
fungus gnats (preferring
smaller larvae),
thrip
pupae, collembola and
nematodes. The mites
can be observed at the
base of the plant stems, in
and on the soil.
Soil
temperature must be a
minimum of 15°C with an
open structure. Slow but
steady reduction of the
infestation level will occur
in a crop that has an
existing
fungus
gnat
population. Best used as
a preventative just after seeding or transplant. Hypoaspis will
remain in the soil for the duration of the crop. Do not apply a
pesticide soil drench to the crop at any time after application of
Hypoaspis.
500 CHL Item No ............................................................810099
15000 CHL Item No ........................................................810299
Fungus Gnat Control
Steinernema
Feltiae
An
entomopathogenic
nematode that is applied
to the soil as a drench.
Steinernema enters the
fungus gnat larvae via
mouth, anus or respiratory
openings and starts to
feed. This causes specific
bacteria to emerge from
the intestinal tract of the
nematode. These spread
inside the insect, multiply
very rapidly and convert
host tissue into products that can easily be taken up by the
nematodes. The fungus gnat larvae dies within a few days.
The infected larvae change colour from yellow to light brown
and become slimy. Hence they are difficult to observe in the
soil. Soil temperature must be between 13 and 25°C, soil
humidity content must be high. (Keep soil moist for the first
two weeks after application.)
5 million CHL Item No ....................................................810736
200 million CHL Item No ................................................810737
1 billion CHL Item No ....................................................810738
25000 CHL Item No ........................................................810300
Atheta Coriaria
The predatory beetle
Atheta coriaria is an
extremely voracious and
efficient predator of some
of the most troublesome
soil insects such as
fungus gnats, shore flies
as well as the very
damaging western flower
thrips. Except for the egg
and pupa stages, all
stages of of Atheta actively
search for prey. Because
of their flight capability, adults can travel through a
greenhouse, which ensures good distribution and fast
population development. Total development time from egg to
adult takes approximately three weeks at 25°C. After that
period the adult predatory beetle will be active for
approximately three weeks. Atheta-system can be applied to
different media (compost, rockwool, coconut fibre) by
distributing the content of one package (250 beetles) into 5 to
10 piles.
100 CHL Item No ............................................................810121
500 CHL Item No ............................................................810122
Note: Shore flies look very similar to fungus gnats. Shore flies
are attracted by pools of standing water, especially when algae
is present. Clean up pools of standing water and algae to treat
a shore fly problem.
BIOLOGICAL CONTROL
Spider Mite Control
Phytoseiulus persimilis*
Persimilis is a bright red
predatory mite for control of Two
Spotted spider mite. It will also
eat Carmine spider mite, but it
must have a Two Spotted spider
mite diet for survival. Adults and
nymph persimilis actively search
for all stages (preferring younger stages) of their prey and suck
them dry. Relative humidity should be greater than 75% and
the temperature above 20°C for some hours of the day.
Available on a vermiculite carrier or on bean leaves. Sprinkle
vermiculite carrier on leaves or place in application boxes.
Place bean leaves throughout infested leaf canopy.
Vermiculite:
European Red mite. Sprinkle material containing predatory
mite on leaves. Amblyseius californicus adults, larvae and
nymphs can soon be found on the underside of leaves, actively
searching or waiting for mites.
2000 CHL Item No ..........................................................810599
Note: Also see Amblyseius cucumeris for spider mite control,
in the thrip control section.
Thrip Control
Amblyseius Cucumeris
2000 CHL Item No ..........................................................810511
A beige-pink, droplet shaped
predatory mite.
Adult mites
search for all thrip stages and
suck them dry. Can sustain
themselves on pollen. Relative
humidity should be above 75% and the temperature above
20°C for some hours of the day. This strain not susceptible to
dispause. These mites also eat spider mites, several other
mites, honeydew and pollen.
2000 Hot Spot CHL Item No ..........................................810522
Amblyseius System
500 CHL Item No ............................................................810508
1000 CHL Item No ..........................................................810510
Bean leaves:
2000 CHL Item No ..........................................................810520
• ask about our special P.persimilis reared for tomatoes.
2000 CHL Item No ..........................................................810732
The predatory mites are packed per 25,000 or 50,000 in a
practical 1 litre sprinkler on a bran carrier. Through a dosage
lid the mites are spread on the leaves. Also available in a 5 litre
bucket containing 100,000 mites per bucket.
Feltiella Acarisuga
25000 1L. CHL Item No..................................................810606
For use on various species of
spider mites. Feltiella is a gallmidge to be used only in
conjunction with P. persimilis
and in the event that spider mite
occurs in hot spots or colonies.
Feltiella should be introduced in
high humidity environments.
The adult midge is 2mm long,
pink-brown with long legs; larvae are orange-brown and take
about one week to become pupae. Pupae are wrapped inside
a white cocoon, occur mainly on the undersides of leaves
along veins and take about one week to become adults. Adult
Feltiella search for spider mite colonies and deposit eggs next
to spider mites. Hatched larvae suck spider mite eggs dry.
250 CHL Item No ............................................................810735
Amblyseius Californicus
To be used only in conjunction
with P. persimilis. Amblyseius
californicus should be applied in
high temperatures and low
humidity.
These transparent
white-yellow to orange predatory
mites are for use on all stages of
Two Spotted spider mite,
Carmine spider mite and
50000 1L. CHL Item No..................................................810601
100000 5L. CHL Item No................................................810594
Amblyseius-Vermiculite System
This formation is especially developed to blow Amblyseius in
the crop with a sprayer. This application method is particularly
useful for ornamental crops.
25000 1L. CHL Item No..................................................810595
Amblyseius-Breeding System (ABS)
This consists of breeder boxes that are simply hung in the crop
without having to open them. A breeder box contains bran on
which a fungus grows that serves as food for bran mites.
These bran mites are on their turn eaten by the Amblyseius.
One breeder box contains about 1000 predatory mites and can
still produce thousands more for several weeks. The mites
leave the breeder box gradually and spread throughout the
crop. With this system Amblyseius can now also be introduced
preventatively in crops without pollen production such as
cucumbers.
100 sachets CHL Item No ..............................................810597
250 sachets CHL Item No ..............................................810603
5L. bucket CHL Item No ................................................810598
BIOLOGICAL CONTROL
Orius Insidiosus
Eretmocerus spp.
A small black beetle with grey,
white or brown sections on its
wings.
Nymphs range from
yellow with orange spots to dark
brown. Adults and nymphs pierce
thrip larvae and adults and suck
them dry. Temperature range is
17 to 29°C, relative humidity at 60
- 80%. Will diapause when the
day length is less than 14 hours. Orius are quite aggressive
and voracious, but can be used safely with cucumeris and
degenerans. Orius lay a large number of eggs in side shoots,
so introduce Orius shortly after they have been removed.
Apply Orius in groups of 25 - 50 to encourage mating.
Yellow adult parasitic wasp for use
on Greenhouse and Silverleaf
whitefly larvae. All whitefly pupae
turn yellow, emerging from the
parasitized scale in about 2 - 3
weeks. Eretmocerus may also
feed on whitefly. The 24 hour average temperature in the
greenhouse should be at least 20°C. Eretmocerus is
recommended for use in higher greenhouse temperature
environments, as Eretmocerus remains active at temperatures
above 30°C. It takes about 1 week for Eretmocerus to emerge
from introduced scales. Sprinkle on rockwool slabs or place in
application boxes.
500 CHL Item No ............................................................810620
Loose
1000 CHL Item No..............................810723
1000 CHL Item No ..........................................................810621
5000 CHL Item No..............................810725
Note: Also see Hypoaspis miles in fungus gnat section for thrip
control.
15000 CHL Item No............................810726
Whitefly Control
On cards
10000 (100 cards) CHL Item No ........810731
Encarsia Formosa
A black adult parasitic wasp for
use on larvae of Greenhouse and
Silverleaf whitefly (formerly
Sweet Potato Whitefly). After the
whitefly larvae stage have been
parasitized, the whitefly pupae
stage turns black or brown. The darkened whitefly pupae are
then referred to as "parasitized scales". The adult Encarsia
emerges from the parasitized scale in about 2 - 3 weeks.
Encarsia may also feed on whitefly. The 24 hour average
temperature in the greenhouse should be at least 17°C for
parasitization to take place.
On cards
For a practical and optimal distribution in the greenhouse
Encarsia pupae are stuck on cards. Each card contains at
least 100 pupae, which lay in a deep groove protected against
damage during distribution and manipulation. Shortly after
hanging the cards in the crop, adult Encarsia emerge and start
looking for whiteflies.
Combination Encarsia Formosa &
Eretmocerus spp.
An effective two-pronged attack against Greenhouse and
Silverleaf whitefly that enables the introduction of both whitefly
parasitic wasps in one easy application. Available in a 50/50
ratio. Sprinkle on rockwool slabs or place in application boxes.
On cards
5000 (50 cards) CHL Item No ........................................810727
10000 (100 cards) CHL Item No ....................................810729
Biological Control Accessories
Application Boxes (Biobox)
A small cardboard box with a tab that enables
the box to be hung within the crop canopy.
50 CHL Item No ..................................810812
5000 on 50 cards CHL Item No ....................................810703
10000 on 100 cards CHL Item No ................................810701
Loose
As cards are not practical in all crops, Encarsia can also be
bought as loose pupae. With the first delivery, little hanger pots
are supplied which can be hung in the greenhouse. With a
specially developed dispenser tube the pupae are sprinkled in
the hanger. Each time 100 pupae are released.
1000 CHL Item No ..........................................................810698
Magnifying Lens
A hand held lens that will magnify up to 10X. Brings tiny pests
such as spider mites into focus, as well as smaller biologicals
such as Feltiella and Amblyseius. An essential for any insect
monitoring program.
CHL Item No ..................................................................810820
5000 CHL Item No ..........................................................810699
BIOLOGICAL CONTROL
Pesticide Schedule
Schedule
1
5
Who Can Use It
Pesticide Characteristics
licensed exterminator
very toxic
certified grower
only with special permit
Insecticides
Fungicides
Plant Growth Regulators
very persistent
Orthene
Captan
Cycocel Extra
highly mobile
Trumpet
Decree
B-Nine
Citation
Aliette
Bonzi
Decis
Subdue (Max)
Sumagic
Kelthane
Nova
very toxic
certified grower
very persistent
Dimilin
assistant agriculturist
2
3
4
6
Schedule 2 products are much more common in the
greenhouse and include (but not limited to):
under supervision
highly mobile
no special permit
less toxic or less persistent
alternative not available
toxic
certified grower
persistent
trainee or technician under supervision
of a licensed exterminator
(some restrictions apply)
moderately mobile
moderately toxic
certified grower
moderately persistent
trainee or technician
slightly mobile
low toxicity
certified grower
non-persistent
non-mobile
consumer
containers < 1KG or < 1L
low toxicity
certified grower
non-persistent
non-mobile
consumer
containers < 1KG or 1L
You must be a certified grower (with a current Pesticide
Certification through the Grower Pesticide Safety Course) to be
able to buy and use Schedule 2 or 5 pesticides. All assistants
who handle and use Schedule 2 and 5 pesticides under the
supervision of a certified grower must have formal pesticide
safety training recognized by the ministry of the environment.
Pesticides scheduled as 3, 4 or 6 do not require certification to
buy and use on your own crop or property.
Thiodan
Pirliss
Endeavor
The other large group of pesticides registered for greenhouse
use are those that fall into Schedule 3 (growers do not require
certification to buy or use on their own crop). These include:
Insecticides
Fungicides
Plant Growth Regulators
Fascination
Avid
Daconil 2787
Dipel
Phyton 27
DDVP smoke
Meltatox
Enstar II
Truban
Malathion
Rovral
Pounce
Quintozene
Dyno-Mite
Mycostop
Senator
Rootshield
There is only one Schedule 6 product, the growth regulator
A-Rest.
If you do not have the proper certification,
please contact our office or your sales representative
and we can provide the proper information
for completing your certificate.
Schedule 1 pesticides are restricted for use with a special
permit for each purchase only. An example of this type of
product is methyl bromide. The only Schedule 5 pesticide
registered for greenhouse floriculture use is Intercept
(imidacloprid).
PESTICIDE SCHEDULES
Funginex 190EC
For use on outdoor roses and
ornamentals for the control of powdery
mildew and black spot.
Rate: 1L/1000L
5 L CHL Item No ........................900141
Manzate 200DF
For field tomato and cucumber. Controls
early and late blight, stemphyllum and
anthracnose in tomato; anthracnose,
alternaria, leaf spot, downy mildew and
gummy stem blight in cucumber.
Consult label for rates
2.5 kg CHL Item No ....................900147
Meltatox 40EC
For the control of powdery mildew on
greenhouse and field grown roses.
Rate: 2.5L/1000L
1 L CHL Item No ........................900150
Aliette 80 WDG
Decree 50WDG
A systemic fungicide registered to
control water mould diseases like
pythium
and
phytophthora
in
greenhouse ornamentals and bedding
plants. Can be used as a foliar spray or
as a drench.
Rate: Foliar: 2.8 kg/ha
A locally systemic fungicide effective on
control of botrytis cinerea and is
registered for greenhouse and outdoor
ornamentals and greenhouse tomatoes.
Shows no adverse effects on beneficial
organisms.
Rate: 1.12kg/1000L/HA
2.26 kg CHL Item No ..................900137
500g CHL Item No ......................900123
Bravo 500
Ferbam 76WDG
A fungicide available for a broad
spectrum of plant diseases including
anthracnose, powdery mildew and scab
on cucumber and also early and late
blight and Septoria leaf spot on
tomatoes. Used as a spray.
For the control of botrytis on
greenhouse tomato, lettuce and
cucumber. Also controls rust and black
spot, Ferbam causes severe injury to
seedless English cucumbers.
Rate: 2.0 kg/1000L
10 L CHL Item No ......................900109
Daconil 2787
A fungicide for control of black spot,
blossom blight, powdery mildew,
botrytis on roses and many other
greenhouse and outdoor ornamentals.
Rate: 2.5L/1000L
No-Damp
For use as a preventative and control on
all seedlings and cuttings.
Rate: 10 mL/1L
4 L CHL Item No ........................900153
Nova 40W
A systemic fungicide for use on
greenhouse tomato and cucumber.
Prevents and controls: powdery mildew
on tomato; powdery mildew and gummy
stem blight on cucumber. Use routinely
in a preventative spray program.
Rate: 340 g/1000L
560 g CHL Item No ....................900154
4.5 kg CHL Item No ....................900135
Phyton 27
Folpan WP
For control of bacterial and fungal
diseases on ornamentals. Controls
botrytis, xanthomonas and powdery
mildew. Works best as a preventative
treatment. Can be used as a foliar spray
or dip.
Rate: 125-250mL/100L
A wettable powder for control of a
number of fungus diseases on certain
fruit, vegetable and ornamental crops.
Rate: 2kg/1000L
10 kg CHL Item No ....................900139
1 L CHL Item No ........................900160
10 L CHL Item No ......................900121
FUNGICIDES
Previcur N
Rovral 50WP
Sulphur 92% Microfine
A reliable and protectant fungicide
offering long-lasting protection against
pythium in greenhouse cucumber
crops.
Rate: May be applied as a solid drench
only.
For the control of botrytis on
ornamentals, greenhouse tomato,
lettuce and cucumber.
Controls
Benomyl (Benlate) resistant strains of
botrytis.
Rate: 1kg/1000L
For control of powdery mildew and leaf
spot on greenhouse tomatoes; also
controls powdery mildew, scab, brown
rot and black knot on ornamentals.
Tomato Rate: 750g/1000L
1L/1000L/100-200mL/plant
1 L CHL Item No ........................900159
1 kg CHL Item No ......................900167
15 kg CHL Item No ....................900177
Quintozene 75 WP
Senator 70WP
22.7 kg CHL Item No ..................900176
Truban
A fungicide to control several diseases
on ornamentals and roses including
powdery mildew, black spot, leaf spot
and botrytis.
Consult label for rates.
A soil mix or drench for control of
damping off and stem rot diseases
caused by pythium and phytopthora in
ornamental and nursery plants.
2 kg. CHL Item No ......................900131
Truban 25EC
2.27 kg CHL Item No ..................900161
Subdue MAXX
Ridomil Gold 480EC
Rate: 115mL/380L/40m2
946 mL CHL Item No ..................900181
A systemic fungicide to be used
routinely in a preventative program.
A metalaxyl fungicide for the control of
pythium and phytopthora in greenhouse
ornamentals. Can be mixed with media
or drenched at seeding or transplanting.
Rate: 24-40 mL/1000L
500 mL CHL Item No ..................900165
1 L CHL Item No ........................900133
For use on cole crops, ginseng and
ornamentals. Controls club root on cole
crops; Rhizoctonia stem rot on
greenhouse ornamentals; Use as a dip
for prevention of bulb rots.
Pot Plant Rate: 250g/1000L
Truban 30WP
Rate: 250-750g/1000L/100m2
2 lb. CHL Item No ......................900184
3.78 L CHL Item No ....................900166
FUNGICIDES
DDVP Smoke fumigator
For greenhouse ornamentals to control
aphids, red spider mites, thrips,
mealbugs and whiteflies. Injurious on
some varieties for chrysanthemums and
snapdragons.
Rate: 1 can/300m3
12/case CHL Item No ................910112
Decis 5.0EC
For greenhouse flower crops, outdoor
vegetables and ornamentals. Controls
western flower thrips on greenhouse
ornamentals; European corn borers in
field pepper, as well as cabbageworms,
cabbage loopers and diamond black
moths.
Toxic to fish and aquatic
organisms.
Rate: 350-500mL/1000L
1L CHL Item No ..........................910115
Dibrom 9.6EC (naled)
Admire 240FL
Citation 75WP
For control of Colorado potato beetle
and aphids in potato and other field
crops.
1L CHL Item No ..........................910101
Controls leafminer, fungus gnats and
shoreflies in greenhouse ornamentals.
Citation is effective against all larval
stages as an insect growth regulator.
Leafminers rate: 75g/400L
Fungus rate: 75g/570L
4L CHL Item No ..........................910102
300g (6x75g) CHL Item No ........900051
Ambush 50EC
Confirm 240F
Dimilin
For use on greenhouse tomatoes,
cucumbers and ornamentals. Controls
greenhouse whitefly and chrysanthemum
leafminer.
Rate: 20 mL/50-100L
For control of larval Lepidoptera
(caterpillars) in fruit trees. Used as a
foliar spray.
An insect growth regulator for control of
fungus gnats and shoreflies on
greenhouse ornamentals.
Many
beneficials are unaffected by this
product. Can be used as a drench or a
coarse spray.
Rate: coarse spray - 150g/1000L
Drench - varies by pot size
and volume; see product label
4L CHL Item No ..........................910100
900 mL CHL Item No..................910104
Avid 1.9EC
For control of spider mites on tomatoes,
cucumbers and peppers; spider mites
and
leafminers
on
greenhouse
ornamentals. Insect death may take 3-4
days, however damage is no longer
occurring. Does not kill mite eggs, but is
reported to penetrate and reduce egg
hatch. May burn pre-transplant tomato
and cucumber seedlings. Also injurious
to ferns and Shasta daisies.
Rate: 30-60ML/100L
1L CHL Item No ..........................910111
DDVP Liquid
For greenhouse tomatoes, cucumbers
and ornamentals for the control of
aphids and whiteflies. Can be used in
fogging equipment. Also used for insect
control in livestock dwellings and
outdoor areas.
Rate: 25-50 mL/1L
10L CHL Item No ........................910114
For greenhouse and outdoor vegetables
and ornamentals.
Steam pipe
application. Controls whiteflies, spider
mites,
aphids,
leafrollers
and
mealybugs.
Injurious to some
ornamentals
including
some
chrysanthemum varieties.
Rate: 10mL/1000m2
3.78L CHL Item No ....................910127
500g CHL Item No ..................MSCDIM
Dipel
A biological insecticide for the control of
larvae
(caterpillars)
of
certain
Lepidopterouse species.
Rate: 310-625g/1000L or see product
label
Dipel 2XDF 500 g CHL Item No ........910130
Dipel WP 10kg CHL Item No......910129
INSECTICIDES AND MITICIDES
Floramite has virtually no impact on
honey bees, predacious mites and other
beneficial insects that are currently
being used in commercial greenhouse
production.
Rate: see label
946 ml CHL Item No ..................910142
Intercept 60WP
For control of aphids and whiteflies on
greenhouse ornamentals, greenhouse
cucumbers and tomatoes. Applied as a
drench it is a highly effective systemic
insecticide but can only be used once
per crop.
Rate: 13.3g/100L per 150mL/150mmpot
250g CHL Item No......................900049
Kelthane AP-35
Dormant Oil
500 mL Conc. CHL Item No ......910135
For dormant and summer treatment on
trees and shrubs to control scales, red
spiders,
mites,
mealybugs
and
whiteflies. Can also be used as a plant
shine. Injurious to ferns and succulents.
Rate: 400mL/100L
1L RTU CHL Item No..................910137
4L CHL Item No ..........................910128
DYN0-Mite 75WP
For greenhouse ornamentals and
vegetables. Controls greenhouse and
sweet potato whiteflies, and two spotted
spider mites.
Whitefly rate: 284-425g/1000L/ha
Spider Mite rate: 142-212g/1000L/ha
280g (10x28g) CHL Item No ......910113
End•All Insect Killer
An insecticide and miticide that kills all
stages of aphids, mites and whiteflies.
For use on flowering plants such as
fuchsia and roses, woody ornamental
bushes and trees, herbs, houseplants,
fruit trees, and the following vegetables:
celery, tomatoes, peppers, peas,
lettuce, potatoes, cucumbers and other
vine related products, radishes, onions,
asparagus, beans, cabbage and related
plants and squash.
Rate: 20mL/1L
4L Conc. CHL Item No ..............910138
Endeavor 50WG
For control of aphids and whiteflies on
greenhouse ornamentals. It is compatible
with most beneficials. It is used as a
foliar spray and a non-ionic surfactant is
recommended to improve penetration
into foliage.
Rate: 100-200g/1000L
420g (6x70g) CHL Item No ........910132
Enstar II Insect
Growth Regulator
For control of whiteflies and aphids on
ornamental crops. It is not registered for
vegetable crops grown for food.
Rate: preventative - 25-40mL/100L
existing populations - 75mL/100L
150mL CHL Item No ..................910134
Floramite SC
Floramite SC is a new contact miticide
which provides excellent control of
spider mites in the ornamental industry.
It provides rapid knockdown of targeted
mite pests, generally within three days.
For use on greenhouse ornamentals
and outdoor vegetables. Controls two
spotted spider, Pacific, tropical and
tomato russet mites in greenhouses and
clover mites around the outside of the
greenhouse.
May be injurious to
impatiens, roses, poinsettias, hibiscus,
gloxinias, chrysanthemums, begonias
and African violets.
Rate: 750-1000g/1000L
2kg CHL Item No ........................910136
Malathion 25WP
For greenhouse outdoor ornamentals
and outdoor vegetables.
Controls
aphids, mites, thrips, mealybugs,
whiteflies and many other insects.
Injurious to fern, petunia, cassula, sweet
pea, curcurbits, carnations and some
rose varieties.
Rate: 3.5kg/1000L
2 kg CHL Item No ......................910147
Monitor 480
For control of aphids, beetles and
cabbage looper on field vegetables.
Toxic to fish and wildlife. Keep out of
watershed. Avoid use during flowering
and pollination periods. Usually used
with a surfactant for better coverage.
Rate: 160mL/100L
10L CHL Item ............................910154
Nicotine Smoke
Slug-Em
Trumpet 80WP
For control of aphids, most thrips,
chrysanthemum and rose midge, on
greenhouse ornamentals and aphids
and thrips on greenhouse tomatoes,
cucumbers, lettuce and peppers.
Rate: 1 can/300m3
Lures slugs and snails from all parts of
the greenhouse or garden and kills
them. Keep away from children and
pets.
2kg CHL Item No ........................910191
For greenhouse floriculture crops and
interior plantscapes. Controls scales,
western flower thrips, mealybugs,
whiteflies and aphids when used as a
foliar treatment: thrips and fungus gnat
larvae when used as a soil treatment.
Success 480SC
750g CHL Item No......................910199
A new insecticide which controls
caterpillar and beetle species and
western flower thrips on outdoor crops
and ornamentals.
Safe for most
beneficials.
Vectobac 200G
12/case CHL Item No ................910159
Orthene 75SP
A systemic and contact action
insecticide for ornamentals, trees and
greenhouse roses. Controls many types
of mites, scales, thrips, leafminers,
leafrollers,
aphids,
greenhouse
whiteflies, mealybugs, army worms, tent
caterpillars and more.
Rate: 850g/1000L
1L CHL Item No ..........................910099
5kg CHL Item No ........................910204
Thiodan
Vectobac 600L
1.5 kg CHL Item No....................910164
A systemic aphicide for many
greenhouse ornamentals.
May be
injurious to open blooms.
Rate: 500g/1000L
For greenhouse tomato and cucumber,
field vegetables and ornamentals.
Controls aphids, whiteflies and western
flower thrips in greenhouse tomato and
cucumber. Controls many other insects
in field vegetable crops. Highly toxic to
fish.
750g CHL Item No......................910181
Thiodan 4EC
Safer's Insectidical Soap
Rate: 1.25-1.5/1000L
10L CHL Item No ........................910196
Pirliss 50DF
For control of aphids, mealybugs, spider
mites, whiteflies, soft brown scale,
psyllids, rose or pear slugs, earwigs and
elm leafminer on vegetables, fruits,
shrubs, trees or greenhouse plantings.
Thiodan 50WP
4L CHL Item No ..........................910184
Controls aphids on greenhouse
peppers. Also for use on greenhouse
and interior plantings, vegetables, fruit
trees, shrubs and landscape trees to
control such insects as aphids,
mealybugs, spider mites, whiteflies, soft
scales, psyllids, rose or pear slugs,
earwigs, beetles and caterpillars.
Leaves no harmful residues.
Rate: 50L/1000L
10L CHL Item No ........................910187
120L CHL Item No ......................910188
Sevin T & O
Sevin is a broad spectrum insecticide for
outdoor ornamentals and fruit. Effective
against beetles, caterpillars and aphids.
For turf, it controls white grubs and
leatherjackets.
Rate: 2.3-3.5L/1000L
Controls mosquito larvae in standing
water for about one week. For use in
water wholly confined within property of
user.
Rate: 3-10kg/ha
Rate: 1-1.5kg/1000L/ha
2 kg CHL Item No ......................910193
Trounce Insecticide
4L CHL Item No ..........................910185
10L CHL Item No ........................910183
Controls fungus gnat larvae in
greenhouse ornamentals, vegetables
and herbal bedding plants.
Rate: light to moderate
infestation - 2-4L/600-1000L
Severe infestation
- 4-8L/600L-1000L
10L CHL Item No ........................910203
Vendex 50W
Controls two spotted spider mites on
greenhouse cucumber and tomato
crops. Non-toxic to bees and not highly
injurious
to
other
beneficials.
Compatible with other insecticides and
fungicides in greenhouse spray
schedules.
Rate:500g-1kg/1000L
750g CHL Item No......................910205
Vydate
For control of aphids, leafhoppers,
leafrollers, two spotted spider mites, on
apple trees, potatoes and raspberries.
Toxic to wildlife. Do not apply where
runoff is likely.
10L CHL Item No ........................900196
10L CHL Item No ........................910182
Cycocel Extra
Stim Root #1 (0.1% IBA)
For use on poinsettias to induce shorter
internodes and thicker stems to produce
a sturdy, compact plant. Can be applied
as a soil drench or spray to pans or pots
after the poinsettia is well rooted and
established. May be applied in pans or
pots after cuttings have established a
well developed root system, after
panning stock when roots are
developing and after pinching plants.
For softwood cuttings.
Used for easy to propagate plants.
10L CHL Item No ........................910422
A-Rest
For height control of Easter lilies,
poinsettias, and chrysanthemums.
Heavier applications produce more
compact
plants,
while
lighter
applications produce plants nearer to
normal growth habits. Can be applied
as a spray or drench.
1L CHL Item No ..........................910403
Ethrel
1L CHL Item No ..........................910423
4L CHL Item No ..........................910424
Falgro Tablets
10L CHL Item No ........................910425
This is gibberellic acid. There are 20
tablet in a box that are 7.5g each.
Rootech Cloning Gel
150g (20x7.5g) CHL Item No......910427
B-Nine WSG
A foliar spray for chrysanthemums,
poinsettas, box plants, hydrangeas and
azaleas. Stems are stronger, leaves are
greener and more drought resistant.
500g CHL Item No ......................910409
10kg CHL Item No ......................910412
Bonzi
For use in greenhouses on annual
bedding plants, cell packs, flats and
small pots. Desired height control can
be obtained with a single foliar spray or
drench application. Good height control
can be achieved with repeated
applications 7-10 days apart at half
recommended rate.
1L CHL Item No ..........................910408
500g CHL Item No ......................910433
10kg CHL Item No ......................910434
Stim Root #2(0.4% IBA)
For semi-hardwood plants. Used for
rooting woody and semi-woody plants
and easy to propagate evergreens.
100g CHL Item No ......................910435
A plant growth regulator that mimics the
natural plant hormone ethylene to effect
plant growth, flowering and ripening of
fruit.
Registered for use on field
tomatoes and several other crops to
induce hastened and uniform ripening ,
as well as uniform fruit colour.
4L CHL Item No ..........................910404
100g CHL Item No ......................910430
500g CHL Item No ......................910436
10kg CHL Item No ......................910439
Stim Root #3(0.8% IBA)
For hardwood plants. Used for rooting
difficult to propagate plants such as
evergreens and dormant leafless
cuttings.
100g CHL Item No ......................910440
500g CHL Item No ......................910441
Stim Root Liquid
This is an exceptional and unique recipe
containing powerful hormones, vitamins
and nutrients especially formulated to
promote
rapid,
healthy
root
development
during
vegetative
propagation. A thick, rich gel, Rootech
adheres to the cut tissue, preventing
embolism, infection and shock. It
surrounds the stem with sustenance it
can immediately use. Great for most
hard-to-root plants and can be diluted
with water for use on cuttings.
Consult label for results.
Different species respond differently to
Stim Root Liquid. The potential to burn
cuttings is greater with the liquid than
with the powder. Treat a small number
of cuttings at different concentrations to
determine the best one. Stim Root
Liquid is recommended for woody
species.
Stim Root Liquid 2500 (2500 ppm IBA)
1L CHL Item No ..........................910444
20L CHL Item No ........................910449
56g CHL Item No ........................750730
112g CHL Item No ......................750729
1L CHL Item No ..........................910447
227g CHL Item No ......................750741
20L CHL Item No ........................910450
Stim Root Powder
Stim Root powder stimulates rooting in
cuttings. Place a small quantity in a
smaller container, dip lower 1 cm of
cutting into Stim Root. Tap excess
powder off and plant into rooting
medium.
1L CHL Item No ..........................910453
20L CHL Item No ........................910454
GROWTH REGULATORS
Sumagic
Herbicides
A growth regulator registered for poinsettias, Easter lilies,
chrysanthemums and many bedding plant species including
geraniums.
Retards growth almost immediately after
treatment. Best applied in morning or evening when plants are
less stressed. Important to pay careful attention to spray
volume to achieve maximum uniformity.
Glycofos
4L CHL Item No ..............................................................910429
Gramoxone
Thrive Alive
A post-emergent liquid herbicide that contains a wetting agent.
Kills all existing foliage, but does not affect the root.
Recommended for grass and weed control in fruit crops and
shelterbelts.
Rate: 75 mL/10L per 100 m3
Thrive Alive is a preventative and restorative general purpose
plant tonic. It stimulates rapid and lush vegetative growth and
promotes profuse flowering during blossoming. Can be used
safely and easily in both hydroponic and soil applications. It
facilitates vigorous and healthy root development for both
cuttings and established root systems, while protecting your
plants from transplant-related shock. Can be used as a soil
drench when taking cuttings. It also can be used as a foliar
spray throughout the vegetative cycle and into the first week of
flowering for that "green-up" effect. It is available in both a
natural and organic product with the green label and with the
red label, it is fortified with non-organic products.
A no-name brand post-emergent general herbicide for control
of annual and perennial weeds, woody brush and trees.
Rate: 10mL/1L per 100 m3
10L CHL Item No ............................................................910328
5L CHL Item No ..............................................................910321
Red 1L. CHL Item No......................................................750733
Red 4L. CHL Item No......................................................750732
Green 1L. CHL Item No ..................................................750735
Green 4L. CHL Item No ..................................................750736
Ronstar 2G
A selective, pre-emergent granular herbicide for use on woody
ornamental shrubs, vines and trees grown in containers. For
control of many annual broadleaf weeds and grasses. May be
injurious to some varieties of andromeda, azalea, cotoneaster,
crapemyrtle, spring heath, Canada hemlock, hibiscus,
rhododendron, viburnum, Norway and white spruce.
Rate: 10-22.5g/m2 of pot surface area
Broadcast rate: 100-225kg/ha
22.7kg CHL Item No ......................................................910325
(formerly MSCRON)
Roundup
A water soluble post-emergent liquid herbicide for the control
of annual and perennial weeds, woody brush and trees.
1L Super Concentrate CHL Item No ..............................910330
10L CHL Item No ............................................................910327
GROWTH
REGULATORS/HERBICIDES
Anti-Desiccant
Protects plantings from water losses
causing winter kill, summer scale and
transplant shock.
For use on
evergreens, shrubs, trees, foliage,roses
and some flowering plants.
Rate: 1 part to 4 parts water
4L CHL Item No ..........................920106
Rainfast in 24 hours. It is made from
100%
natural
ingredients
environmentally safe and exempt from
federal pesticide registration. Available
in soluble powder concentrate or in premixed jugs (1 litre and 5 litre).
1 kg CHL Item No ......................920130
10 kg CHL Item No ....................920131
Anti-Foam
Skoot Repellent
A neutral antifoaming agent for use with
pesticide spray mixtures. Eliminates
foaming in the spray tank, enables faster
tank filling, ensures correct fill volumes,
allows for more accurate chemical
applications, reduces chance of
chemical overflow, saves time and
chemical.
Rate: 7mL/500L spray solution
A harmless chemical with a bad taste to
discourage feeding by mice, rabbits and
deer for up to 6 months.
180 mL CHL Item No ..................910323
BB5 - Acidifier & pH Indicator
Optimizes pesticide spray performance
by acidifying water to a pH range of 4.5
to 5.5. Upon reaching this range of pH,
BB5 will turn the water a shade of pink or
deep pink. Then add pesticide as
directed on pesticide label.
1L CHL Item No ..........................920107
Plantskydd
4L CHL Item No ..........................920124
Scarecrow
- Motion Activated Sprinkler
When the Scarecrow sees an
intruder, it instantly releases
full garden hose water
pressure towards the
trespasser. The effect
is both startling and
immediate! Animals
quickly get out of the
area and avoid it in the
future. It uses 2 to 3 cups of
water per deterrence, runs for
months and 'fires' up to 5000
times on one 9 volt battery. It
detects animals day and night.
The Scarecrow sprays only over
the area to be protected. It is easy
to install, move and store as well as ecofriendly and chemical-free. A humane
solution to unwanted intruders!!
CHL Item No ..............................891959
Rodent Control
structures and wiring, etc. and
contaminate water. (Rats and mice are
responsible for more than 25% of the
fires in farmhouses and barns.)
Canadian HydroGardens supplies the
Aegis Bait Station and Hombre, a singlefeed anticoagulant that is the newest
active ingredient available. The Aegis
bait stations are available in sizes
suitable for rats and mice. They keep
bait away from non-targeted animals
and children (they come with a universal
key). They can be used indoors or
outdoors and withstand the toughest
conditions. Hombre is available in
pellets, blocks, and mini-cubes that can
be placed inside the bait stations. It
doesn't induce bait shyness because of
the low concentration of difethianlone,
more food-quality grain and an attractive
odor.
Aegis Mice Bait Station
CHL Item No ..............................920125
Aegis Rat Bait Station
CHL Item No ..............................920126
Hombre Mini-Blocks 5 kg.
CHL Item No ..............................920122
Hombre Mini-Blocks 10 kg.
CHL Item No ..............................920123
Wetting Agents
AquaGro 2000L
For use in production and maintenance
of ornamental plants in greenhouse and
nurseries. It is a surfactant that helps to
uniformly distribute water and chemicals
to the plants. One treatment lasts four
months.
10L CHL Item No ........................720120
Plantskydd is a long lasting, year round
deer repellent. It has been proven
effective in commercial applications, for
home gardeners and landscape
professionals. Animals avoid treated
ornamental shrubs, perennials and
annuals before they bite, not after! Can
last up to 6 months over winter on
dormant ornamental shrubs and
seedlings
even
under
severe
snow/rainfall and 3 months on most
other
succulent/broadleaf
plants.
Agral 90
It is important to control rats and mice in
and
around
greenhouses
and
outbuildings. They are the first and
second most destructive vertebrates.
Rats destroy 20% of the crops
worldwide. Both mice and rats damage
A non-ionic liquid wetting agent
registered for use with several
pesticides to enhance pesticide
performance.
Agral 90 increases
spreading and stick to give a more
thorough coverage and minimize run off.
Apply as a spray.
Rate: 0.25-1L/1000L
10L CHL Item No ........................920103
MISCELLANEOUS ITEMS
Basamid
A granular soil fumigant for the
control of soil borne nematodes, soil
fungi and germinating weed seeds. It
is suitable for fumigation of open land
and all kinds of seedbeds for
nurseries and greenhouses. The
waiting period between treatment
and planting depends on soil
temperature, moisture and soil
structure. See label for length of
waiting period. Can be applied with
a hand shaker
Rate: 3.25 - 5 kg/100m2
Must be incorporated to a depth of 15-23 cm.
20kg CHL Item No ..........................................................910312
Biofoam
Micrell Antibacterial Lotion
Soap
A soap based antibacterial lotion
containing soft cleaning agents and
emollients formulated for frequent use
that cleans hands and kills 99.5% of
germs as you wash.
800 ml CHL Item No ................920145
Purell Hand Sanitizer
An alcohol-based hand sanitizing gel
that provides an alternative where soap and water
handwashing are not immediately feasible. Kills 99.9% of most
germs. Is available in convenient small 4 oz. bottles for
keeping in workers' pockets or in larger bag that fits in soap
dispenser that can be conveniently mounted close to work
station.
Biofoam is a powerful foaming cleaning concentrate. It is for
the removal of organic and inorganic residues, particularly
scale build-up. It is biodegradable and removes soiling
anywhere where humidity can cause soil and scale build-up.
See label for rates.
4 oz CHL Item No ..........................................................920143
20L CHL Item No ..........................................................920142
Holds an 800 ml. bag of Purell Hand Sanitizer or Micrell
Antibacterial Soap for easy dispensing.
Biosolve
Biosolve is a multipurpose heavy duty cleaner, especially for
the removal of organic soiling, especially fats and grease. It
contains sodium hydroxide and inhalation of the diluted
product mist may cause irritation to the nose and respiratory
tract.
See label for rates
20L CHL Item No ..........................................................920150
Hyperox
Hyperox is the new wave in disinfection with broad spectrum
activity against bateria, viruses and fungi. It works well even
under cold conditions. Hyperox is biodegradable and does
not leave any residue when used at recommended dilutions.
See label for rates
800 ml CHL Item No ......................................................920144
Soap Dispenser - Wall Mount
CHL Item No ..................................................................920146
Virkon Virucidal Disinfectant
(Peroxygen compounds and Organic acids)
Cleans and disinfects buildings, instruments and foot baths.
Virkon is a 90% biodegradable, non-corrosive germicide for
one step cleaning and disinfection of greenhouses. Virkon
offers all the benefits of a quality disinfectant without any
worker safety concerns. Do not contact plants with Virkon
directly. Can be applied with a pressure washer.
Rate: 5-10 g/L for a 0.5-1.0% solution
50g CHL Item No ............................................................920154
500g CHL Item No ..........................................................920152
5 kg CHL Item No ..........................................................920148
5L CHL Item No ............................................................920147
20 kg CHL Item No ........................................................920151
20L CHL Item No ............................................................920149
Disinfection Mat
The disinfection mat holds 12 l. of disinfectant. Virkon at 1% is
the recommended one. The mat is sealed on sides and
bottom so solution does not leak out. Made of extremely
rugged material, very little, if any, solid matter will penetrate the
mat, thus reducing any chance of neutralizing the disinfectant.
34" x 34" CHL Item No ....................................................920155
GREENHOUSE SANITATION
Hydrogen Peroxide
Clean-Up
Can be used as a disinfectant through irrigation lines and used
as a cleaner.
A liquid cleaner designed to remove oil, grease, dust and dirt
deposits. Can be used in high pressure equipment, steamcleaning machines, etc. Suitable for greenhouse
structures,concrete, equipment, tools, carts, etc.
See label for rates
64kg CHL Item No ..........................................................750602
Sodium Hypochlorite
A chlorine based product that is used in disinfecting and
cleaning in the greenhouse.
20L CHL Item No ............................................................920180
Horti-Klor
234kg CHL Item No ........................................................750521
An active chlorinated detergent designed to dislodge stubborn
material such as algae, whitewash, oily residues and dirt.
See label for rates
Chemprocide
20L CHL Item No ............................................................920174
Chemprocide is an ammonium chloride compound which kills
bacteria and offers excellent mildew control. It can be used in
footbaths, and throughout the greenhouse as a disinfectant,
sanitizer and fungistat. Suitable for all hard surfaces and
horticultural equipment.
See label for rates.
Strip-It
22kg CHL Item No ..........................................................750520
20L CHL Item No ............................................................920171
A powerful combination of cleaning and wetting agents which
effectively removes whitewash coating, algae, dirt, calcium and
other hard water deposits. Can be safely used on many types
of surfaces but must not be allowed to dry on the surface as
etching may occur.
Rate: 1L Strip-It / 10 - 30 L of water
205L CHL Item No ..........................................................920172
20L CHL Item No ............................................................920176
GREENHOUSE SANITATION
Tomatoes
Beefsteak
Trust
TmC5VF2FrWi
High production with large fruits are the
main characteristics of this variety.
Most seeds are treated.
Tomato,
cucumber, pepper and eggplant seeds
are sold by count; lettuce is sold by
weight.
In order to protect the freshness and
quality of your seed, we will not accept
the return of seed unless arranged prior
to sale. As you the customer will
appreciate, this ensures that you always
get fresh seed that has been stored at
the correct temperature.
All seed is sold by numbered lots,
therefore any problems will be dealt with
by lot numbers. For instance, if only one
customer has a problem with
germination of a particular lot number
that many growers have purchased, this
would indicate a problem with growing
conditions and not the seed. It is wise
for growers to record lot numbers when
seeding.
TmC5OiVF2FrWi
A new variety with
a nice open plant
habit, strong vigor
and a generative
character. Grows
straight along the wire. High yield
potential. Fruits are very uniform in size
with an average weight of 240 grams.
Fruits are deep red and firm with an
excellent shelf life.
CHL Item No ..............................780129
Canadian HydroGardens Ltd. distributes
DeRuiter's complete line of seeds.
Thanks to DeRuiter's extensive breeding
knowledge we can supply growers with
leading new cultivars.
Though we carry DeRuiter's complete
line of vegetable seed, we also have
access to other varieties from several
other companies such as Rijk Zwaan
and Enza Zaden.
Matrix
Quest
Currently the most popular beefsteak
variety in North America. Uniform
ripening with average fruit weight of 180280 grams. Very firm fruits with good
shelf life.
TmC5VF2FrWi
Large beef with an average fruit weight
of 210 grams. Fruits are very firm , shiny
with nice ribbing. Shelf life is excellent.
Suitable for long season crop. Quest is
very vigorous and performs very well
under high light conditions and tolerates
high temperature as well.
CHL Item No ..............................780115
Clusters
CHL Item No ..............................780100
Clarance
Blitz
This is a high yielding variety that is easy
to grow. It is suitable for long crop with
shiny fruits and tolerant to russeting. It
is a tall plant with fruit averaging
between 140 - 160 grams. Good cluster
shape.
TmC5VF2FrWi
Uniform ripening, strong vigor, average
fruit weight 200-280 grams. This is a
light sensitive variety that should be
sown after Nov. 10th. Plant density
should not be too tight early on. This
variety has shown to be strong in the
summer heat. It also has performed well
in fall crops.
CHL Item No ..............................780102
Dundee
TmC5VR2FrNWi
Ideal variety for the fall. Open plant
habit and early into production. Very
high yield potential. Fruits are slightly
flat and extremely firm with good colour
and shine. Very tolerant to russeting.
Average fruit weight is 225 grams.
TmC5VF2Fr
CHL Item No ..............................780504
Tricia
TmC5VF2FrWi
This is a generative variety that must be
grafted for long crop. It is an easy
labour crop and ideal for interplanting
being easy to grow. It has a thicker,
greener vine and is jointless. The fruit is
very consistently sized, shiny and deep
red and weighs about 130 - 160 grams.
CHL Item No ..............................780512
CHL Item No ..............................780109
SEEDS
Tresco
TmC5VF2FrWi
Tresco is an ideal fall crop. Results from
testing in Leamington show that clusters
keep their shape better than other
varieties when planted in the heat of
summer. Few problems with clusters
only being 2 or 3 tomatoes. It has
moderate vigor and fruit weighs about
135 - 150 grams.
CHL Item No ..............................780502
Rootstocks
Maxifort
TmC5VF2FrNK
This is a rootstock tomato used for
grafting which is now widely used to add
resistance and/or to increase vigor for
some varieties. Maxifort has more vigor
than Beaufort.
CHL Item No ..............................780527
Beaufort
TmVF2FrNK
Cocktail Tomatoes
30 - 75 grams
Picolino
TmC5VF2NFr
This is a red cocktail cluster that you
pick as a cluster. It is a short vigorous
variety with fruit between 30 and 35
grams that is a nice red and very
flavourful.
CHL Item No ..............................780215
Red Delight TmC5VF2FrWi
This is a red cocktail cluster that is high
yielding and tolerant to cracking. It
makes an excellent presentation and
has great taster. It is a tall vigorous
variety with fruit weighing between 50 to
60 grams.
CHL Item No ..............................780498
Flavorino
TmVF2N
CHL Item No ..............................780524
This is a red plum cocktail that must be
grafted to get Fr resistance. Flavorino
has great flavour with fruit weighing 30 35 grams. It is a tall plant with moderate
vigor.
Specialty Tomatoes
CHL Item No ..............................780212
(formerly MSCFLV)
Again, this is a rootstock but has less
vigor than Maxifort.
Cherry Tomatoes
15 - 25 grams
Favorita
TmC5F2N
This is a red cherry tomato with great
flavour. Fruit weighs about 15 grams. It
must be grafted to get Fr resistance and
is a tall generative variety.
CHL Item No ..............................780301
Conchita
TmC5F2FrWi
This is a red cluster cherry tomato that is
tasty and has an excellent shelf life. The
fruit are shiny and weigh between 17
and 20 grams. It is an open and
generative variety.
CHL Item No ..............................780507
Grape Tomatoes
15 - 20 grams
Dasher
TmVF2N
This is a great tasting grape tomato with
fruit weighing 15 to 20 grams. It is an
open plant with moderate vigor.
CHL Item No ..............................780509
Amsterdam TmF1VN
This is a great tasting grape tomato with
fruit weighing 17 to 20 grams. It is an
open plant with moderate vigor.
Cassanta
TmF1
This is the best tasting grape tomato
with fruit weighing 15 - 17 grams. It is a
short plant with less vigor.
CHL Item No ..............................780516
Beefsteak Pink
Makari (DRK 453) TmC5VF2Fr
This is a pink beefsteak with excellent
fruit shape weighing about 200 grams.
It has moderate plant vigor.
CHL Item No ..............................780206
Cucumbers
Camaro
This cucumber is
partial tolerant to
powdery mildew
and free of leaf
necrosis. It is a
nice dark green,
nicely ribbed and
medium to long
in length. Good
endurance
for
long crop. There
is
no
need
for high night
temperature
to
get the length, it is
naturally medium.
May require cooler night to control the
vigor. It is best for fall and winter crops
but can be grown all year round.
Average length is 34 - 40 cm.
CHL Item No ..............................780599
Logica
Logica's strong tolerance to mildew and
its high yield potential make it the best
variety for the summer. It excels under
extreme heat. The plant is vigorous but
very open keeping the labour input very
low. It has excellent fruit quality and
high yield potential. Average length is
34 - 42 cm.
CHL Item No ..............................780610
(formerly MSDRR)
CHL Item No ..............................780513
SEEDS
Dominica
Derby
Indoor Lettuce
This cucumber is more vegetative than
Logica but has similar strong tolerance
to powdery mildew. It has a high yield
potential with excellent fruit shape and
quality. It is easy to grow and makes a
good summer crop but also can be
grown in late spring and early fall.
Average length is 34 - 40 cm.
This is a yellow sweet pepper in which
the fruit are more blocky and a lighter
yellow than Lesley. They have a very
high yield and are earlier than Lesley. It
is an open and somewhat tall variety that
is vigorous at start but very well
balanced once first set on. The fruit
weigh 210 - 230 grams.
Lettuce is sold by weight. (Tomato,
cucumber, pepper and eggplant are
sold by count.) Approximate quantities
are as follows:
CHL Item No ..............................780625
CHL Item No ..............................790206
Mini-Cucumbers
Lesley
Jawell
This
mini-cuke
has
a
partial
tolerance
to
powdery mildew
and is CMVT and
CVYVT. It can be
planted
year
round with 1 to
two fruits per
node.
It is a
generative variety with nice vigor of
laterals, balanced and fast growing. The
fruit are a nice dark green with no neck
and an excellent shelf life. They go into
production early and have a higher
yield.
CHL Item No ..............................780217
Manar
Manar has a strong powdery mildew
tolerance and is CMVT and CVYVT. It is
good for late spring to early fall planting.
It is a vegetative variety with a balanced
plant and is multi fruited. The fruit are
darker and cylindrical with a length of
15 - 17 cm.
CHL Item No ..............................780710
Peppers
Funky
This is a large sweet red pepper.
Resistant to Tm2
Lesley is a new variety of yellow pepper
which is remarkable for its uniform
shape and fruit quality, high yield and
low labour requirement. It gives big fruit,
1 - 2 cm longer than wide. The dark
green colour turns quite quickly to
yellow.
Again, it is an open and
somewhat tall variety with large leaves
and few sideshoots. They have good
tolerance against russeting and
cracking. Fruit weighs 200 - 240 grams.
CHL Item No ..............................790200
Eggplants
Orion
This is the best for large size eggplants.
It has a high yield and is purple in colour.
The plant is vigorous. Orion is a halflong with weight between 450 - 400
grams.
CHL Item No ..............................790301
(formerly MSCEGO)
¼ oz. = 5500 seeds
½ oz. = 11000 seeds
1 oz. = 22000 seeds
Rex
A thick-leaved summer butterhead
lettuce type of excellent quality. Slowbolting and very strong against tipburn,
with a nice, clean and well-closed base.
Its leaves are not brittle and it is easy to
cut. Resistant to Brermia BL 1-12, 17,
18, 22. Available in prilled or precision
seed.
CHL Item No ................790420 (prilled)
or 790419(precision)
Vegas
Vegas is a butterhead lettuce, good for
planting in spring and summer indoors.
Resistant to BL 1-17, 19, 21. Available in
prilled or precision.
CHL Item No ............790425 (precision)
or 790426(prilled)
Amandine
This variety belongs to the range of
triple-red varieties. (Triple-red means a
more intensive red coloured leaves).
Amandine RZ is recommended for
spring, winter and autumn indoor and
outdoor cultivation.
For indoor
cultivation, it is an improvement on
Loretta by producing bigger and heavier
heads. Resistant to Bremia BL-16, 19,
21.
Available in prilled.
CHL Item No ..............................790401
CHL Item No ..............................790101
SEEDS
Single Element Fertilizers
Major Elements
DESCRIPTION
N-P-K
BAG SIZE
CHL ITEM NO.
Ammonium Nitrate
34-0-0
25 kg.
750100
Ammonium Sulphate
21-0-0
25 kg.
750102
15.5-0-0
22.7 kg.
750110
--
25 kg.
750106
Mono-ammonium Phosphate
16-62-0
25 kg.
750129
Mono-potassium Phosphate
0-52-34
25 kg.
750132
Muriate of Potash (potassium chloride)
0-0-62
25 kg.
750134
Potassium Nitrate (HAIFA)
13.5-0-46
22.7 kg.
750141
Potassium Nitrate (greenhouse)
13.5-0-46
25 kg.
750142
Potassium Sulphate
0-0-50
22.7 kg.
750146
Triple Super Phosphate (farm grade)
0-46-0
25 kg.
750156
Magnesium Sulphate (10%)
--
25 kg.
750124
Magnesium Nitrate
--
25 kg.
750122
Urea
46-0-0
22.7 kg.
750158
Potassium Bicarbonate
0-0-47
25 kg.
750135
Dolomitic Limestone (21%Ca, 12%Mg)
--
22.7 kg.
750118
Calcitic Limestone (40%Ca)
--
25 kg.
750104
Calcium Nitrate (greenhouse)
Calcium Chloride (28%)
Minor Elements
DESCRIPTION
BAG SIZE CHL ITEM NO. BULK SIZE
CHL ITEM NO.
Iron Chelate 13% (EDTA)
2 kg.
750234
25 kg.
750236
Iron Chelate 9% (HEDTA)
1 kg.
750227
25 kg.
750228
Iron Chelate 11% (DTPA)
2 kg.
750230
25 kg.
750232
Iron Chelate 7%
2 kg.
750226
25 kg.
750225
--
--
25 kg.
750224
Manganese Chelate 13%
1 kg.
750120
25 kg.
750121
Manganese Sulphate 29.9%
2 kg.
750248
22.7 kg.
750250
Zinc Chelate 14%
2 kg.
750262
25 kg.
--
Zinc Sulphate 36%
2 kg.
750266
25 kg.
750268
Copper Chelate 14.5%
2 kg.
750218
25 kg.
750219
Copper Sulphate 25%
2 kg.
750220
25 kg.
750222
Borax Penta 15%
2 kg.
750206
25 kg.
750207
Boric Acid 17.5%
2 kg.
750210
20 kg.
750212
Sodium Molybdate 46%
1 kg.
750258
--
--
Chelated Trace Element Mix
2 kg.
750214
--
--
Solubor 20%
1 kg.
750254
22.7 kg.
750256
Iron Chelate 6% Liquid (DTPA)
What is a Chelated
Micronutrient?
Chelating agents such as EDTA,
DTPA and HEDTA are large
organic structures that form a
complex with micronutrients. This
complex forms a larger chelated
ion that reduces the ability of the
micronutrient to react with the
soil, making the micronutrient
more available for plant uptake.
The chelating agent keeps the
micronutrient in solution even
when the soil pH is higher than
desired for a specific crop. Plants
are able to absorb chelates very
easily and there is less chance of
burning plant roots than if
sulphates were used instead. All
chelates are completely soluble
individual metal complexes for
use in correcting deficiencies or
for custom mixing nutrient
solutions.
SINGLE ELEMENT FERTILIZERS
ACIDS
DESCRIPTION
UNIT SIZE
CONTAINER DEPOSIT
CHL ITEM NO.
Nitric Acid 67%
282 kg. Poly drum
--
750508
Nitric Acid 67%
35 kg. Poly container
$15.00
750503
Phosphoric Acid 85%
340 kg. Poly drum
$70.00
750515
Phosphoric Acid 85%
34 kg. Plastic carboy
$15.00
750512
Sulphuric Acid 93%
350 kg. Poly drum
$50.00
750517
Sulphuric Acid 93%
35 kg. Poly container
$10.00
750516
Accessories
We encourage you to be safety minded when using acids.
Several accessories help reduce the drudgery of decanting
acid and enhances safety. Two items are featured here and
here is a sample of others that are available.
Beckson Acid Pump
• poly hand pump
• fits into large drums for easier dispensing
CHL Item No....................................................................950102
• aluminum drum wrench (for removing bung plugs)
Acid Drum Cart
• steel drum wrench
• bung adapter/vented tap (for decanting)
• stainless steel acid pump/motor
• full face shield
• rubber gloves with long cuff
• safety eye glasses
• metal two wheel push cart
• holds 45 gal. drum
• can wheel around and then leans on side to allow
for tap dispensing
CHL Item No....................................................................950107
ACIDS
Plant Product Water Soluble
Fertilizers
Canadian HydroGardens carries the full range of Plant Product
water soluble fertilizers. The most common ones follow. Different
combinations may be used to achieve quantity price breaks. They
are all available in 15 kg. bags with 63 bags per skid. Call our
order desk for pricing and volume discounts
Plant-Prod® 10-52-10
Plant Starter
Crystal Fertilizer
Plant
Starter
10-52-10
supplies the necessary high
phosphorus levels that
young plants require for
rapid root growth without
presenting the problem of
poor solubility which most
conventional starters do. It is
a safe fertilizer with a low salt
index, and contains no
sulphates
or
harmful
chlorides which can be
particularly injurious to
young plants.
This formula is a water soluble crystal formulation designed
specifically for plug production, but can be used as an "all in
one" formula for many crops.
Plant Starter is recommended:
• when transplanting seedlings or bedding plants,
• for field transplanting of tomatoes and cucumbers and
during the early stages of crop development,
• for greenhouse crops when a high phosphorus fertilizer is
required.
Cal-Mag Fertilizer
15 kg CHL Item No ........................................................750302
Features include:
• over 90% of the nitrogen is in the nitrate form.
• includes magnesium nitrate, potassium nitrate, and
calcium nitrate.
• the calcium to magnesium ratio is 2:1, as required for
plugs.
• has a complete micronutrient package including high
molybdenum.
Potassium Nitrate
Plant-Prod 12-0-44 is water soluble potassium nitrate
supplemented with the Plant-Prod chelated micronutrient
complex.
Features include:
• over 97% of the nitrogen is in the nitrate form, no urea
• the calcium to magnesium ratio is 2:1,
as required for plugs.
• has a complete micronutrient package including high
molybdenum.
• includes nitrogen, phosphorus, potassium, calcium and
magnesium.
15 kg CHL Item No ........................................................750303
This formula is a water soluble prilled formulation designed
specifically for plug production, but useful as a calcium and
magnesium source.
All nitrogen in this formula is in the nitrate form, making it ideal
for periods of low light. 12-0-44 ensures more uniform plant
growth during the winter and when finishing crops. This results
in better colour and improved plant tone.
15 kg CHL Item No ........................................................750306
The high nitrate nitrogen and potassium content combined
with the absence of phosphorus make it ideal:
• for Easter Lily culture,
• as a finisher for Chrysanthemums and Poinsettias,
• when sufficient phosphorus has already been incorporated
into the soil,
• when alternated with other formulations for use on
greenhouse tomatoes, and cucumbers, grown in soil.
The Cal-Pot Special is a completely water soluble prilled
mixture of calcium nitrate, potassium nitrate and
micronutrients. All nutrients are in a prilled form to improve
flowability.
15 kg CHL Item No ........................................................750304
Cal-Pot Special
Over 90% of the nitrogen is in the nitrate form, and there is no
urea. This makes it very effective under low light conditions.
This formula can be used to raise media pH since it has an
alkaline soil reaction.
15 kg CHL Item No ........................................................750308
BLENDED FERTILIZERS
Soilless Feed
High Phosphate
This formula meets the needs of growers who are using
soilless growing media. It contains magnesium, as well as an
increased level of molybdenum in combination with the other
five micronutrients. This formulation will supply sufficient
nutrients to overcome most deficiency problems normally
associated with soilless mixes.
Plant-Prod High Phosphate Fertilizer
is ideal for Hydrangeas since the
high phosphorus content ties up
excess aluminum in the soil which
causes a strong pink colouration in
the blooms. Acid-loving plants such
as African Violets respond well to this
formulation due to its high potential
acidity.
Over 55% of the nitrogen is in the nitrate form which is
preferable for soilless mixes. It is recommended for crops
which require a high nitrate nitrogen content such as Bedding
Plants, Easter Lilies, Poinsettias, and Chrysanthemums.
15 kg CHL Item No ........................................................750310
This formula is recommended when
higher phosphorus levels are required:
Pot Plant Special
• during the early stages of crop growth, such as required by
many greenhouse crops, particularly tomatoes and
cucumbers grown in soil,
• to remedy phosphorus deficient soils.
The Pot Plant Special supplies twice as much potassium as
nitrogen, while still maintaining the optimal levels of the other
plant nutrients.
15 kg CHL Item No ........................................................750314
It features:
• over 58% of the nitrogen in the nitrate form,
• a very low potential acidity, exhibiting minimal acidifying
tendencies in the soil.
It is recommended:
• for periods of low light,
• when soil or tissue samples show low potassium levels,
• when plants are setting bud, as well as during maturation
and blooming.
Use the Pot Plant Special on Pot Mums, Easter Lilies,
Geraniums, and Gloxinias, and when finishing Poinsettias, and
Chrysanthemums.
15 kg CHL Item No ........................................................750312
®
African Violet Fertilizer
This high nitrate formula is ideal for African Violets. PlantProd® 17-15-17 has 55% of its nitrogen in the nitrate form, with
no urea.
Features include:
• complete micronutrient package including extra
magnesium
• high phosphorus level, needed by African Violets for
flowering
• has a moderately acid potential reaction in the media
15 kg ..............................................................................750317
Poinsettia Fertilizer
This formula features:
• over 60% of the nitrogen in
the nitrate form, which is
important for low light
feeding
• a high level of magnesium,
particularly important for
low pH media,
• an increased level of
molybdenum,
• a lower level of boron which
reduces the possibility of
excess accumulation,
• micronutrients which are
chelated with EDTA and
DTPA which increases the
availability of the
micronutrients over
a wider pH range.
15 kg CHL Item No ........................................................750318
BLENDED FERTILIZERS
High Nitrate All Season
All Purpose
Recommended for growing
in soilless mixes due to the
high
nitrate
and
higher
concentrations of molybdenum
and magnesium, this product
forms the backbone of many
greenhouse growers' nutritional
programs.
The most widely used of all water soluble fertilizers is 20- 20-20
All Purpose Fertilizer. It is very effective on all types of plants
and because of its balanced formula, may be used whenever a
more specific formula is not required. Alone or in combination
with other analyses, it meets the nutritional requirements of
many different crops.
The higher concentration of
molybdenum and magnesium
ensures optimum nutrient
availability in soilless mixes.
With over 60% of the nitrogen in
the nitrate form, this analysis is
an ideal all season fertilizer and
is particularly effective during low light conditions. With a
complete micronutrient package and either alone or in
combination with other analyses, 20-8-20 is suitable for a wide
range of crops.
15 kg CHL Item No ........................................................750322
High Potash
This formula is recommended for summer feeding of Roses,
Geraniums, and other ornamentals. Greenhouse tomatoes and
cucumbers grown in soil respond well to this formula when
used alone or in combination with potassium nitrate.
This high potassium fertilizer is ideal for use when plants are
maturing and blooming. It allows the plants to establish
heavier, thick-walled cells which results in good keeping
qualities. Since the potential acidity is very low, this fertilizer will
exhibit minimal acidifying activity in the soil. It is particularly
useful where a change in soil pH is undesirable.
15 kg CHL Item No ........................................................750320
Interior Landscape
The Interior Landscape Fertilizer combines the nutritional
benefits of a complete fertilizer with the convenience of no
marking dye.
This formula features:
• over 60% of the nitrogen in the nitrate form, making it ideal
for use any time of the year with both high and low light
conditions,
• a higher concentration of molybdenum and magnesium for
optimum nutrient availability in soilless mixes,
• no marking dye, so there is less chance of staining carpets
and other materials.
It is recommended:
• for bedding plants,
• for foliage plants,
• when a balanced formula is required,
• as a foliar feed to correct nutrient deficiencies in various
agricultural and horticultural crops.
15 Kg CHL Item No ........................................................750340
Plant-Prod® 21-7-7
Acid Fertilizer
This formula has a very high potential acidity. It can be used
in a continuous feeding program, but the pH should be
monitored to ensure that it does not go below the desired level.
It is recommended:
• for crops requiring acid soil conditions such as Azaleas,
Rhododendrons, and many evergreens. The nitrogen is
provided in an ideal ratio of ammonium to urea for Azaleas.
• when irrigation water has a high pH, 21-7-7 will help to
overcome the effect of the bicarbonate ions in the media and
gradually reduce the pH for better growth of bedding plants,
pot crops, cut flowers, and nursery stock in containers and
in the field.
15 kg CHL Item No ........................................................750344
High Nitrogen
Crops such as cut flowers, container nursery stock and field
grown vegetables respond well to this formula.
As well, it is very suitable for foliar feeding due to its very low
salt index and high level of urea nitrogen.
28-14-14 is recommended for Orchids and many woody
ornamentals because of its acid forming tendencies, resulting
from its very high potential acidity. This formula is designed:
• for use during periods of vegetative growth, when plants
have a high nitrogen requirement,
• to correct nitrogen deficiency where soil or tissue tests show
low nitrogen,
• for foliar feeding of nursery and agricultural crops.
15 kg CHL Item No ........................................................750346
15 kg CHL Item No ........................................................750324
BLENDED FERTILIZERS
Hydroponic
High Nitrate Forestry Seedling
This formula has been designed for use in conjunction with
calcium nitrate to supply nitrogen, phosphorous, potassium,
minor elements, calcium and magnesium at appropriate levels
for hydroponic culture.
Rapid vegetative growth of forest seedlings occurs between
the 4th and 16th weeks of growth. 20-8-20 Forestry Special
should be used on a constant feed basis to encourage good
top growth. This formulation contains four times the iron as
most Plant-Prod fertilizers, lower phosphorus, and added
magnesium. It should be used for the majority of the growing
season, once seedlings have a well established root system.
This hydroponic fertilizer is a good general formulation to use
for crops grown hydroponically, as well as crops grown in
substrate cultures such as rockwool and phenolic foam. Iron
has been chelated with DTPA for better availability.
15 kg CHL Item No ........................................................750372
Hydroponic
Designed as a complete fertilizer for hydroponic growers and
soilless culture growers. It contains chelated micronutrients
necessary for good plant growth under hydroponic conditions.
This formula is ideal for general hydroponic and soilless
culture. It contains a good balance of nutrients to promote
healthy growth of most ornamental plants and vegetables, with
the convenience of all nutrients being in one package.
15 kg CHL Item No ........................................................750374
Plant-Prod® 30-8-8
Tree Fertilizer
Plant-Prod 30-8-8 is a water suspendible fertilizer for root or
surface feeding of landscape trees.
It features:
• a significant portion of the nitrogen derived from
slow release, water-insoluble Nitroform® which provides a
safe, long term supply of nitrogen,
• a complete micronutrient package for healthy plant growth,
• a very low salt index which guarantees tree safety. 30-8-8
Tree Fertilizer can be injected using a soil needle or
drenched into the root zone. It is ideal for spring or fall
fertility programs.
15 kg CHL Item No ........................................................750360
15 kg CHL Item No ........................................................750352
Forestry Seedling Finisher
The Forestry Finisher is recommended for hardening seedlings
in the fall by supplying low nitrogen, moderate phosphorus
and a high level of potash. The levels of phosphorus and
potassium encourage root development and increase plant
resistance to frost and drought. Over 65% of the nitrogen is
available in the nitrate form which prevents soft growth under
low light conditions.
15 kg CHL Item No ........................................................750354
Nutricote Major Element
Controlled Release Fertilizers
Nutricote is characterized by coating nitrate compound
fertilizers with a special resin. The duration of nutrient release
is controlled by the composition of the resin and the kind and
quality of a special "chemical release agent" added to the resin.
This allows for consistency and precision of nutrient release
from these fertilizers. It gives a high degree of crop safety with
the flexibility of release periods from 40 to 360 days at 25°C. It
comes in several configurations; the common ones are listed
below.
14-14-14 Nutricote 20 kg. - (vegetable and flower)
(available in 40, 70, 100, 140, 180, 270 and 360 day)
13-13-13 Nutricote 20 kg. - (vegetable and flower)
(available in 70, 100, 140, 180, 270 and 360 day)
18-6-8 Nutricote 20 kg. - (ornamental and nursery)
(available in 70, 100, 140, 180, 270 and 360 day)
Forestry Seedling Starter
Plant-Prod Forestry Seedling Starter provides tree seedlings with:
• the proper rate of nitrogen, phosphorus, and potassium for
good root development
• twice the usual level of chelated iron.
It is recommended for use beginning two weeks after
germination through eight weeks of growth thereafter.
15 kg CHL Item No ........................................................750350
BLENDED FERTILIZERS
PRO-MIX 'PGX'
PLUG AND GERMINATION
GROWING MEDIUM
PRO-MIX 'PGX' is a peatbased growing medium for
germination and growingon seedlings with plug
systems. Growth under
high-density
conditions
requires
a
highly
specialized medium that
can
provide
optimum
physical and chemical
properties.
NOW WITH MY CORISE AT
NO EXTRA COST
PRO-MIX ‘BX’
GENERAL PURPOSE
GROWING MEDIUM
PRO-MIX 'BX' is a "General
Purpose" peat-based growing
medium with vermiculite and
perlite, used for the cultivation
of a wide variety of plant
species. This complete mix is
lightweight,
uniform
and
blended to the highest degree
of consistency to ensure
maximum plant performance.
COMPONENTS:
Canadian Sphagnum Peat Moss (75-85% / vol.)•Perlite horticultural grade•Vermiculite•Dolomitic & Calcitic Limestone
(pH adjuster)•Macronutrients•Micronutrients•Wetting Agent.
3
3
3.0 ft , 54/pallet; 3.8 ft , 30/pallet
3
3.0 ft CHL Item No ......................................................Enquire
3
3.8 ft CHL Item No ........................................................720218
PRO-MIX 'HP'
HIGH POROSITY
GROWING MEDIUM
PRO-MIX 'HP' is a "High
Porosity" peat/perlite-based
growing medium. This mix
ensures optimum growth,
especially
when
high
air-capacity and extra
drainage are required. It is
ideal for water-sensitive
crops,
rooting
cuttings
and/or low-light growing
conditions.
COMPONENTS:
Canadian Sphagnum Peat Moss (65-75% / vol.)•Extra Perlite
• horticultural
coarse
grade•Dolomitic
&
Calcitic
Limestone•Macronutrients•Micronutrients•Wetting Agent.
3
3
3
3.0 ft CHL Item No ........................................................720213
3
3.8 ft CHL Item No ........................................................720216
COMPONENTS:
Canadian Sphagnum Peat Moss - short fiber (65-75% /
vol.)•Vermiculite - plug grade•Dolomitic & Calcitic
Limestone•Macronutrients•Micronutrients•Wetting Agent.
3
3
3
3.0 ft CHL Item No ........................................................720215
3
3.8 ft CHL Item No ........................................................720214
PRO-MIX 'BRK'
PEAT-BARK GROWING MEDIUM
PRO-MIX 'BRK' is a "General Purpose", peat/bark-based
growing medium offering the renowned quality and
consistency of PRO-MIX. Its processed Pine bark adds
weight and reduces water retention of media while its quality
Sphagnum peat moss ensures optimal balance between air
and water. This mix resists long-term compaction and improves
container stability.
COMPONENTS:
Canadian Sphagnum Peat Moss (40-50% / vol.)•Processed
Pine Bark (35-45% / vol.)•Perlite - horticultural
grade•Dolomitic & Calcitic Limestone (pH adjuster)•
Macronutrients•Micronutrients•Wetting Agent.
3
3
3
3
PRO-MIX 'TA'
TOBACCO AND AGRICULTURE GROWING MEDIUM
PRO-MIX 'TA' is a lightweight, peat-based growing mediumhigh in calcium and magnesium- formulated for germinating
and growing-on of tobacco and agricultural transplants. This
growing mix allows oxygen and water to move freely, in order
to ensure uniform seed germination and plant growth.
COMPONENTS:
Canadian Sphagnum Peat Moss (65-75% / vol.) - short fiber
•Vermiculite - plug grade•Dolomitic & Calcitic Limestone•
Macronutrients•Micronutrients•Wetting Agent.
3
3.0 ft , 54/pallet
3
3.0 ft CHL Item No ........................................................720217
PREMIER PRO-MIX
FOR POTTING &
SEEDING
PRO-MIX Potting & Seeding
Mix
is
a
multi-use,
lightweight growing mix
suitable for indoor or
outdoor potting, repotting,
transplanting and seeding
applications. It is the
PROFESSIONAL FORMULA
preferred by greenhouse
growers, because it retains
moisture longer, while
providing drainage and
aeration for optimum plant
growth.
COMPONENTS
Canadian Sphagnum Peat Moss•Perlite•Vermiculite•
Limestone •Macronutrients•Micronutrients•Wetting Agent.
35L, 85L
FOR CONTAINERS
PRO-MIX Container Mix
contains
WATER-SAVING
GEL, which provides higher
moisture retention than
ordinary potting mixes. This
mix significantly reduces the
need for frequent watering
of high-maintenance plants.
It minimizes plant wilting in
very hot weather conditions.
Ideal for planters set
outdoors or in solariums
and for water-loving plants.
FOR TREES & SHRUBS
PRO-MIX Tree & Shrub Planting Mix is a medium-weight
growing medium designed for planting trees and shrubs roses and evergreens - in new soil environments.Its
COMPOSTED BARK provides higher bulk density for improved
plant stability. Ensuring faster plant establishment, this mix
minimizes plant loss by reducing transplanting stress. Ideal for
improving stability of plants grown in outdoor planters.
COMPONENTS
Canadian Sphagnum Peat Moss•Composted Softwood Bark
•Limestone•Macronutrients•Micronutrients•Wetting Agent.
35L, 85L
FOR PERENNIALS &
BULBS
PRO-MIX Perennial Planting
Mix is a complete peat/barkbased growing mix specially
formulated for perennial
plants, as well as bulbs and
annual plants. Its LONGLASTING
FERTILIZER
ensures continuous plant
feeding over a period of 9
MONTHS. In addition, its
composted softwood bark
provides higher bulk density
for improved plant stability.
COMPONENTS
Canadian Sphagnum Peat Moss•Time-release Fertilizer•
Composted Softwood Bark•Limestone•Macronutrients•
Micronutrients•Wetting Agent.
35L, 85L
COMPONENTS
Canadian Sphagnum Peat Moss•Water-saving Gel•Perlite•
Vermiculite•Limestone•Macronutrients•Micronutrients•
Wetting Agent.
35L, 85L
PREMIER PRO-MIX
PREMIER PRO-MIX
Grodan Products
Growing Blocks
Since its development as a horticultural medium in Denmark in
1969, Grodan stonewool has become the most used
hydroponic growing medium throughout the world.
Top quality horticultural stonewool products are made from
basalt or diabase rock in conjunction with other amendments.
The process by which stonewool products are made involves
very high temperatures in excess of 1600°C. This renders the
product both chemically and biologically inert and creates the
ideal growing medium for producing vigorous vegetable and
fruit plants, and vibrant flowers. Horticultural stonewool
growing medium is primarily available in the following formats:
slabs, blocks, plugs and cubes.
Featuring improved grooves at the base to promote better
drainage, these growing blocks are
used for direct sowing of macro and
multiblock raised plants. AO36/40
plugs fit well into the hole sizes
provided by the blocks. The
blocks can then be place on top
of a slab to provide for a larger
growing volume. Hugo blocks
are the largest growing block. It
provides enough growing volume
to support a larger plant, so it does
not need to be placed on top of a slab.
Propagation Plugs and Blocks
AO Multiplugs are perhaps the most commonly used
propagation choice for both seeds and cuttings. Macroplugs
are especially made for stem cuttings. Miniblocks provide
space for larger root volumes.
Pro. Name
Block Size
Block/Strip
Cubes/Case
Usage
Example
CHL Item No.
Delta 4G
3"x3"x2 ½"
8
384
Roses
710102/04/06
6
216
Tomato/
Cucumber
710107/10/12/14
6
180
710118
Delta 10G
4"x4"x4"
(Hole size: 42/40)
6
144
MSCBLK
HUGO
1
48
710099
(Hole size: none, 42/40, 27/35, 20/15)
Delta 6.5G
4"x4"x2 ½"
(Hole size: 42/40, 27/35, 20/15)
Pro. Name
AO 25/40
Size of Cube
Cubes/
Cubes/Case
Wrapped Sheet
CHL Item No.
1" sq. x H 1.57"
200
6000
710126
1.4" sq. x H 1.57"
98
2940
710128/29/30
(Hole size:10/10)
AO 36/40
Delta 8G
4"x4"x3.1"
(Hole size: none, 42/40)
6"x6"x6"
(Hole size: 40/40)
(Hole size: 6/15 for cuttings; 10/10 for tomato seeds; 15/15 for cucumber seeds)
Macroplug
36/40, loose
Round 1.57" x H 1.57"
loose
2000
710123
Macroplug
36/40, in trays
Round 1.57" x H 1.57"
84/tray
1008
710125
Grodan Granulates
MM 40/40
1.57" sq. x H 1.57"
45/
(Hole size: 6/15)
wrapped pack
2250
710164
MM 50/40
1.97" sq. x H 1.57"
24/
(Hole size: 6/15)
wrapped pack
1440
710166
Granulated rockwool can be used alone or
as an amendment to organic based mixes.
The great advantage is that you never have
to change the mix. Granulated rockwool will
last for the life of your plants.
Medium absorbent
40 lbs./bag (10-12 cubic ft.)
CHL Item No ................................................................ 710502
GRODAN PRODUCTS
Growing Slabs
Growcubes
The final stage of planting with growing blocks are the Grodan
slabs. There are three slab types available in a variety of sizes.
These slabs come in clearly marked UV resistant poly sleeves
for ease of use.
Growcubes lend themselves to practically any growing system:
ebb and flood, aeroponic, drip irrigation, or just top watering
with a watering can. It can be used for houseplants,
vegetables, aquatic plants, flowers, bonsai, cactus and other
plants.
The renowned Eric Young Orchid Foundation
recommends its use for orchids.
Grodan Expert is the slab that drains the fastest because of its
vertical fibers. By far the most popular slab for the hydroponic
hobbyist market.
Grodan Classic is the slab that stays wetter because of its
horizontal fibers. Best for hot climates and situations where
watering less is a factor.
Grodan Master is a special wet/dry slab. The top layer is
thicker, which stays wetter, while the bottom layer stays drier.
In effect it defies gravity, allowing more even distribution of
moisture throughout the slab.
Pro. Name
Expert 1 year/2 year
Size of Slab
Slab/Pack
CHL Item No.
15 x7.5x90 cm
12
710380/396
15x7.5x100 cm
12
710381/395
20 x7.5x90 cm
12
710382/397
20x7.5x100 cm
12
710383/398
Classic 1 year/2 year
15 x7.5x90 cm
12
710405
15x7.5x100 cm
12
710406
20 x7.5x90 cm
12
710407
20x7.5x100 cm
12
710410/411
Classic 1 year
20 x7.5x180 cm
6
710399
Classic 1 year
20x7.5x200 cm
6
710402
Master 1 year
15 x7.5x90 cm
12
710416
Master 1 year
15x7.5x100 cm
12
710422
Master 1 year
20 x7.5x90 cm
12
710417
Master 1 year
20x7.5x100 cm
12
710415
Master 1 year
20 x7.5x180 cm
6
710400
Master 1 year
20x7.5x200 cm
6
710419
Product
Size
Fills
CHL Item No.
Small Bag
20 Bags/Box
1 Bag fills 3 one gal. pots
710121
Large Bag
3 Bags/Box
1 Bag fills 23 one gal. pots
710122
Grodan Water Content Meter
The hand-held portable water content meter by Grodan allows
rapid monitoring of the water content. It measures the changes
in the water content,
nutrient concentration
(EC)
and
the
temperature within the
slab during a specified
period of time. This
data can then be
displayed in graph form
on your PC, giving you
an insight into your
crops root zone. With
this information, the
grower can monitor
and adjust his water management strategy to achieve optimum
results within the substrate. This also allows simple exchange
of data between colleagues and consultants. This meter
constitutes the solution for growers wishing to gain an insight
into the condition of the plants' root environment.
GRODAN PRODUCTS
Normiska Perlite
Perlite is not a trade name but a
generic term for a naturally occurring
siliceous rock. The distinguishing
feature, which sets it apart from other
volcanic glasses, is that when heated
in our high tech furnaces to a suitable
point in its softening range, it expands
from 4 to 20 times its original volume,
much like a kernel of popcorn.
Pargro Rockwool
The material becomes very light
weight and is capable of holding many
times its weight in water.
It is
chemically inert making it an ideal soil
augmentation product as well as an
ideal sterile starting compound for
seedlings. Additionally, due to its
remarkable ability to retain fluids, it
has a wide market as a filtering
material.
It is fire resistant and has excellent insulating properties. It is
available in 4 cu.ft. bags and in many grades but the common
ones we stock are below.
Fine Grade Perlite CHL Item No ....................................720100
A uniform foundation is the basis of uniform growth which
provides ideal plant control. Special production and control
methods ensure that Pargro stonewool blocks and slabs are
uniform, providing you with the best possible foundation for
maximum production of high quality plants and vegetables. It
is inert and pathogen-free and provides you with a clean and
disease-free start for cultivation. Furthermore the water
retention characteristics of the Pargro stonewool give you
greater freedom in your daily work. It also ensures that your
plants will thrive, providing maximum yield of healthy and high
quality fruits. Pargro is available in the popular sizes and styles
in both blocks and cubes.
Soil Conditioners
Coconut Coir Fibre
This substrate is made from coconut husks. These are treated
either chemically or by weathering for about 18 months, to
remove the salt and other impurities. Coir is a coarse fibrous
material which lends itself to potting and gives a
light aerating environment for your
plants. It is sold in 50
kg. bags or in preformed slabs. Recent
studies have suggested
that
coconut
coir
inhibits Pithium and
Phytothora growth. This
product is also easily
disposed of when finished
your crop. Please inquire
about availability.
Coarse Grade Perlite CHL Item No................................720101
Normiska Vermiculite
Vermiculite is an entirely and naturally
occurring mineral, similar to mica, that
is sold both in its natural state and by
exfoliating the core. Exfoliation is the
term used to describe the expanding
process raw vermiculite goes through
under extreme heat, rendering the
material naturally layered, perfectly
suited for trapping air and moisture. It
does not create any waste byproducts
during processing and is inert, nontoxic, fire resistant and is capable of
holding many times its weight in water.
It has a wide range of uses in the horticulture industry as well
as a variety of industrial applications from insulation to filler in
the plastics industry.
It is available in 4 cu.ft. bags and in many grades but the
common ones we stock are below.
Fine Grade Vermiculite CHL Item No ............................720103
Medium Grade Vermiculite CHL Item No ......................720104
Coarse Grade Vermiculite CHL Item No ........................720106
OTHER SUBSTRATES
PLANT ACCESSORIES
Greenhouse Twine
We carry a complete line of plant accessories to help you with
stringing, tying, lowering, etc. Refer to the illustrations to help
relate the name of each item with its shape and purpose. If you
still have questions, please inquire. Samples are available at
no charge.
1
4
8
3
5
9
FT/Roll
CHL Item No.
P900 plastic twine
9000
R1200 ribbon twine
12000
870304
R1400 ribbon twine
14000
870308
P1500 UV twisted twine
21750
870311
P2000 pepper twine
25000
870315
Jute twine - medium
11000
870309
Please note that many of the twines are available in a variety of colours: white, green, yellow,
blue, orange, red, black.
6
Item Name
Description
7
2
Figure No.
Case Quantity
CHL Item No.
Paskal tomato clips
1
7500
730098
Agro Clip white grip
2
8000
730101
Truss-Arch 1/2 Flex-Moon
3
18000
730113
Truss-String Hook
5
10000
730116
SAFETY EQUIPMENT
Agro J Hook white long
4
15000
730108
Kasco Full Face Mask - Venus ZA1
Clip Hook
7
12000
730120
Bamboo clips 20mm
6
14000
730110
Clothed Elastic
9
10000
730122
Tomato Hi-Wire Spool
8
800
730125
Cucumber Hook (Bato Hook)
10
1500
730123
AN ADVANCED FULL FACE MASK WITH A COMPLETE
RANGE OF FILTRATION OPTIONS
•
The KASCO Full Face
Mask is a very versatile,
comfortable mask,
available with five
interchangeable breathing
and filtration options.
•
The Full Face Mask uses
the same fan motor unit,
battery and filters as the
KASCO helmets.
•
The Full Face Mask is
lightweight … 1 lb. 4 oz.
(600 g.).
(Not Shown)
Max Tapener and Supplies
Ties up plants and vines in a snap.
Description
CHL Item No.
Tapener HT-B
730200
Max Staples 604E-L (4800/box)
730202
Max Replacement Blades (3/pkg)
730204
Max Tape #15 Blue, 11mm x 26m (10 rolls)
730208
Max Tape #25 Red, 11mm x 16m (10 rolls)
730210
• Distortion-free visor offers a peripheral field of vision similar
to human eye, low breathing resistance, easy maintenance
- no tools required, mist-free vision ensured by valveregulated anti-fog system, metallic speech diaphragm.
Mask seal: either silicone or ETDM.
• Venus ZA1 comes with an organic vapour filter and is
self-breathing.
CHL Item No ..................................................................950039
GROWING ACCESSORIES
Paskal Hooks
Kasko Prof - 88 Helmet #K80S-T8N
FOR PERSONAL
RESPIRATORY
PROTECTION WHILE
SPRAYING
• The PROF 88 is a self-contained helmet for easy mobility,
ideal for orchard, field and greenhouse use.
• This powered air-purifying helmet respirator has fan
blowers, batteries and filters all built into the helmet, giving
you excellent freedom of movement in fields or tighter
working areas.
• The PROF 88 can run for four hours on its batteries or
continuously from a tractor or vehicle's power using the
SP88 12 volt cigarette lighter socket cord. The internal
batteries can be charged from the optional NC-9 charger,
or from a tractor with the SP88 cord.
• System includes helmet with flip-up visor, SP88 12 volt cord
for cigarette lighter socket, two ZA1/P3 filters, instructions
• Optional feature available separately are: NC-9, 110 volt
power supply, ZP3 HEPA dust filters, cigarette lighter
socket
Rollerhook
• Assures good control of lowering
length
• Has a spool with 25 to 34 m. of twine
• Designed to avoid slipping or jumping
from the wire
• For wire diameters from 2.50 to 4.0 mm
• Spool is good for up to three years
Rollerplast
• Enables smooth lowering and assures
full control of length
• Has a spool of up to 16 m. of twine
• Designed to avoid slipping or jumping
from the wire
• Quick release of the first 3 to 4 m.
of twine
• Saves trellising labour time
• Spool lasts up to 3 years
Hand Protection
CHL Item No ..................................................................950040
Pre-Tom
Pre-Wound Tomato
Hooks
Reduces chlorophyl stains on hands.
Apply before working with tomato plants.
• Made from heavy
gauge galvanized wire
• Holds enough twine for
up to 2 crops
• Simple 180° twist feeds out a measured amount of twine
• Easily hooks over trellis wire
• Reusable
• Pre-wound models come with a measured amount of twine
including free-fall for initial stringing
• Pre-wound models available with red twine for marking
plants
• Each of the following hooks are available in white, green,
red and blue; the latter two by special order with minimum
quantities
250 ml CHL Item No ......................................................740204
Description
Unit Quantity
Tomato Cells
Black plastic sheet inserts for
packaging tomatoes.
Boxed in 700 or 750 inserts to a
box depending on manufacturer.
Available in sizes as follows:
#18, 20, 22, 25, 27, 28, 30, 32, 35,
39, 42, 45, 52
Insert size is 40 cm x 60 cm.
Miscellaneous Growing
Accessories
18 cm empty hook
1000
18 cm simple (no free fall lengths)
1000
We also stock a wide range of miscellaneous accessories, too
numerous to mention.
18 cm double (with free fall lengths)
1000
These include:
22 cm double (with free fall lengths)
1000
Note: When ordering pre-wound hooks, please specify:
a) white, green, red, blue
b) length of free-fall twine
c) length of remaining twine
d) tomato hooks can be rewound when empty also
Magnifiers
Dramm water breakers
Light meters
Extension wands
Thermometers
Quick disconnect fittings
Hygrometers
Bamboo stakes
GROWING ACCESSORIES
Cucumber Supplies
plastic houses).
Cucumber Wrap Machine Model 625A
1 US gal. CHL Item No ..................................................740098
• Portable table model
• Uses 15-18" stretch wrap
• All stainless steel wrapping
surface
• Hot rod cutoff bar with solid
state temperature control
• 6" x 15" hot plate with non-stick teflon cover
• Film tension adjustment
5 US gal. CHL Item No ..................................................740099
CHL Item No ..................................................................950420
Replacement parts:
23" replacement heating rod #74A-01
CHL Item No ..................................................................760804
Replacement teflon pad #TC0615
CHL Item No ..................................................................950422
Cucumber Wrap
We supply a full range of sizes to meet your needs.
Stretch - For hand wrap, the most popular size is:
18" x 3900' CHL Item No ................................................730503
Shrink - For automatic cuke wrappers, microperforated:
35 lb. roll. CHL Item No ..................................................730500
Greenhouse Shading
Choose from a number of formulations depending on your
structure, your climate and your budget. All of these are in
liquid form concentrates that are ready to use once diluted with
varying amounts of water geared to the percentage of shade
you wish to attain.
HydroGardens Shade Paint
This is our own brand made for us in bulk
quantity so that we can offer a quality white
shade paint to our customers at a budget
price. Suitable for poly or glass houses.
Coverage:
heavy-to cover 2000 sq.ft. - mix 1 gal. shade to 810 gal. of water
medium-to cover 3500 sq.ft. - mix 1 gal. shade to 12-15 gal. of water
light-to cover 5000 sq.ft. - mix 1 gal. shade to 20 gal. of water
18.9L. CHL Item No ........................................................740097
Ultra Kool Ray
•
•
•
•
Concentrated for super savings
White and bright for better heat retention
Safe for a clean environment
Easy to mix and apply
Average dilution rate is 1 part Ultra to 15 parts water. For
longer wear, you can mix X-TRA STICK adhesive additive when
diluting Kool Ray Ultra with water (especially recommended for
X-TRA STICK Adhesive Additive
For longer lasting wear, start with light adhesion amount of 4
ounces of X-TRA STICK to 1 gallon of Kool Ray Ultra that is
already diluted in 15 gallons of water. Avoid using too much XTRA STICK otherwise removal of the shade may be a problem.
1 US quart. CHL Item No ..............................................740116
1 US gal. CHL Item No ..................................................740117
Redusol Xtra
ReduSol Xtra is for applications in which a shade coating must
remain on the greenhouse throughout the season (glass or
plastic). It provides a white, even coating which is easy and
safe to remove at the end of the season with ReduClean. One
20 kg. pail will cover approximately 250-350 sq.m. when a light
transmission of 18% ratio is used. See label for details.
20kg. CHL Item No ........................................................740105
ReduClean
This has been designed specifically to remove ReduSol Xtra
easily. ReduSol and ReduClean contain no environmentally
harmful ingredients. It is only designed to remove ReduSol,
not other shading materials. Will cover 600m.3
10L. CHL Item No ..........................................................Enquire
Sun Clear
Size
Coverage
CHL ITEM NO.
16 oz. (473 ml)
5000 sq.ft.
740108
32 oz. (946 ml)
10000 sq.ft.
740110
3.78 L
40000 sq.ft.
740112
Reduces shading due to condensate
collection on the inside of greenhouse skin
during cold weather. By increasing surface
tension at the inside surface, condensation
tends to "sheet" rather than form droplets. As
a result, inbound light rays pass directly
through the greenhouse skin rather than
being refracted by clinging droplets at the
inside surface. This product is normally
diluted 200:1 with potable water. The better
the water, the better the result.
Note: Metrically speaking, 10L of final mixture covers about
100 m2 of inside surface.
GROWING ACCESSORIES
The Designer Series is a
distinctive decorative pot
available in two colours: clay
or granite.
They are
available in standard pot
sizes and the new
rectangular window boxes
and square planters in a
limited number of sizes.
Pots, Trays, Inserts, Plug trays, Fibre and
Nursery Containers
Canadian HydroGardens is a full line distributor for ITML
Products Inc. We now have available the original Kord and
TLC brands as well as well-known ITML products such as
Panterra pots, the Fibre Grow pots, baskets, etc. and their
expanding Thermoformed pots, trays, etc.
For more
information or photos of specific products, please look at
ITML's website: www.itml.com
ITML features several lines of decorative pots that are very
popular.
The Panterra Series has a
distinctive design with a
textured finish. The bowls,
planters and saucers offer the
look and rich texture of clay
without the heavy weight and
fragility of traditional clay
pots. They have a dual drain
bottom for drainage and
aeration and are available in
three colours: clay, Kord
green, granite. They are
available in oval planters and
bowls, standard pots and
hanging baskets in a wide
variety of sizes.
The Casabella Collection features an extra wide base for
stability, a sturdy heavy rim for product structure and dual drain
bottom for root aeration and increased airflow. They are
available in four colours: clay, Kord
green, granite and sandstone.
They are available in planters
and hanging baskets in a
number of different sizes.
Hanging Pots
ITML offers a wide variety of
attractive hanging baskets in a
broad range of sizes and colours.. In the
more decorative line, they have
Panterra and Casabella. They
are available in many
sizes ranging from 4" to
12" both saucerless
and with saucers.
To appeal to the
larger commercial
grower, they have
several traditional
saucerless pots in
the Kord line and
the most popular
commercial hanging
basket is the Swurl. It
includes the plastic divider,
a distinctive eye catching swirl
design and a gloss finish. It is available in 8", 10" and 12", both
saucerless and with outside saucers. Hangers are available in
3 and 4 strand configurations in plastic and wire.
Standard Pots
ITML has a great selection of quality standard pots featuring
increased soil volume compared to azalea pots. There are
several styles of these pots: Kord Traditional, Regal, and
Elite/Ultra. Each series has a range of pot diameters from 2
1/4" to 6" with varying heights. Many are designed to be used
in automated potting equipment.
CONTAINERS
Square Pots and Trays
Azalea Pots
ITML also have a wide
range of azalea pots:
Kord Traditional, Regal,
and Elite/Ultra. Again, a
large selection of sizes
from 4" to 12" and
various depths are
available. They are
offered in three different
colours: green, white
and terra cotta.
Thermoform Pots
The new thermoform pots
have growing characteristics
and profile identical to
injection-molded pots with a
significant saving in container
cost. They feature a split-level
dual drain bottom for superior
drainage and aeration. They
have a special resin blend to
ensure opaque environment
for root development but are
also known for their strength
and durability. Designed for
automation and handling, they are available in both standard
and azalea style pots. The standard colours are terra cotta and
green but can also be co-extruded to have for example, green
on the outside and black on the inside.
Pro-Tote Trays for Round Pots
ITML has available several
styles of square pot
systems. They are
economically
designed with a
smooth sidewall
and adapted for
automatic filling
equipment
and
handling by mass
merchandisers.
Right angle corners
provide a pot-to-pot fit
that avoids soil spillage.
They can be used in
conjunction with Quick-Lock trays
for easy positive pick-up of pots. They are available in Kordlok
and Kord Lite Squares, TLC Square
Form, and Elite Square pots.
Colours are the standard
green, black and terra
cotta. They are ideal for
annuals, perennials and
foliage. Also available
are pocket trays that
are designed to exactly
fit these pots, both in
regular and with the
Quick-Lock mechanism
that eliminates individual
pot handling. They also
carry heavy-duty flats, web
trays and standard trays with
and without holes that will hold these
square pots and also the inserts listed next.
Inserts and Trays
ITML has three different lines of inserts and trays to fit every
grower's needs: narrow, traditional and true. Each line offers a
different length and/or width to the tray and insert, which will fit
different growers' situations.
These trays offer efficient spacing, shipping and product
presentation of round pots. They are engineered with
strengthening ribs for superior handing. Designed to work
on roller conveyors and automated potting systems, they
feature a raised bottom to allow air and water exchange.
Standard colour is
black.
All of the
above round pots fit
these trays.
Narrow inserts are available in a number of configurations that
include the 1204 regular depth plus 606, 806 and 1802 deep
inserts. All inserts are compatible with your choice of narrow
injection-molded or narrow thermoformed ribbed trays. They
are engineered for easy de-nesting and easily labeled. The
trays are 8 ¼ or 8 ½" wide by 19 3/8" to 20" long. Inserts are
noted as to which are compatible to which tray.
CONTAINERS
Nursery Containers
ITML has a wide range of nursery containers available:
Traditional and squat injection-molded, WhiteRidge blowmolded and Elite blow-molded containers.
Traditional trays and inserts now seem to be the standard in the
industry. Trays are available from 20 7/8" to 21" in both
injection-molded and thermoformed to create a compact,
efficient growing system for bedding plants. The daisy and
web trays have skirted walls for use with electric eyes used
during the automated flat filling operation. Traditional inserts
are available in an extensive number of combinations including
606 and 1801 deep inserts. Again these inserts are engineered
for easy de-nesting.
Traditional injection-molded containers are heavy-duty
containers engineered for nursery applications. They are
designed with strong rims for handling and ideal for
evergreens, tall shrubs and trees. Growers can use a highimpact marketing tag in the tag slot for a premium looking
product at the retail level. They are available in 1 gal. to 7 gal.
trade sizes.
True series inserts and trays are available in the commonly
used cell configurations in regular depth inserts. 606, 906 and
1801 deep inserts are also available. These trays and inserts
are an effective alternative to maximize growing space in the
greenhouse and on shipping racks. Once again, the daisy tray
has the skirted sidewall to accommodate use of electric eyes
during automated flat filling operations. True trays come in
both injection-molded and thermoformed ribbed trays and are
engineered for easy de-nesting.
Plug Trays
Squat injection-molded are again heavy-duty containers with
shorter sides and a wider base for increased stability. With
strong rims for handling, they are ideal for ground covers,
squat shrubs and ornamental trees and for medium to large
water lilies. They are available in 1 gal. to 15 gal. trade sizes.
ITML now offers the full line of TLC plug trays to complement
their extensive product mix. The TLC line of plug trays includes
more than 39 different configurations, including standard
Round and Square plug trays, Common Element plug trays,
Octagonal plug trays and Nova plug trays. These plug trays
now feature improved de-nesting and greater uniformity for
enhanced automation compatibility. They are made of durable
polystyrene, which makes them rigid enough to be used as
stand-alone trays. They have die-cut holes and ramps that are
standard for labeling and are compatible with automatic
seeders and transplanters.
CONTAINERS
WhiteRidge blow-molded pots are an economical alternative to
the heavy-duty injection-molded containers. With strong grip
handles molded in the rims of the larger containers, they are
very convenient for handling of large trees and shrubs during
shipping. They have sturdy engineered corners and a wide
base designed for a stable upright presentation of nursery
stock during the growing cycle and at the retail garden centre.
Available in a number sizes the pots range from 3 gal. to 100
gal.
Fibre Collection
Elite blow-molded containers come with ribbed sides to create
a tough lightweight alternative to the injection-molded nursery
container. Strong pot rims are designed for easy pot denesting for handling in both automated and manual potting
systems. ITML offers efficient bulk packaging for high volume
users. They are ideal for small shrubs, perennials and
tropicals. They are available in 1 gal up to 5 gal. sizes.
ITML offers a good range of fibre patio planters, hanging
baskets, regular growing pots and nursery containers. These
long-lasting, earth-friendly containers are made from recycled
paper products that can be composted at year-end into
nutrient rich bedding material. They insulate and allow roots to
breathe just like clay pots. They are lightweight and the
hanging baskets have the "moss look" with less time and
effort. Many sizes are available in all types of containers. The
larger hanging baskets have cage hangers available to help
with the added weight.
CONTAINERS
Irrigation Equipment
Pumps
Centrifugal, submersible and booster pumps available for
many different applications. We supply pumps made by many
of the top manufacturers including Berkeley, Myers and
Monarch. For fertilizer applications, plastic composite Jacuzzi
or stainless steel Gould pumps are customary. Also available
is a complete line of water system pressure tanks. If you are
looking for a new system or updating your existing system, put
our irrigation experts to work for you.
PVC Fittings
Many sizes and configurations including unions, tees, elbows,
straight couplings, etc. are available. The list is too numerous
to include here. Polyethylene and transition fittings are also
available. Inquire for further details.
Watering Accessories
We carry a number of accessories to make watering easier. We
stock brass quick connects and clamps for making your own
hose and a number of heads and wands for any watering need.
Ball Valves
We carry a full line of PVC and brass ball valves from ¼" up to
4”. All our PVC valves are full port and are available in "true
union" or "non-union econo" body style, with NPT or socketweld connections.
PVC
valves
are
available in slip by
slip and thread by
thread connections.
Please specify when
ordering. Our brass
valves are stocked as
full
port
NPT.
Standard port are
available by special
order.
Foot Valves and Check Valves
These valves are available in
¾" through 3" sizes in plastic
or brass. Check valves are
available as swing check in
brass, ball check in plastic, or
spring in both.
Watering Hose
We carry heavy
duty greenhouse
watering hose that
is kink resistant and
supple
over
a
broad temperature
range made of a rubber/neo composite. It is available in master
rolls or can be cut into custom lengths as ordered. Hose
fittings are available loose or installed on any of the lengths.
Description
PVC Pipe
This pipe is available in ½"
through 10" diameter, plain
or ball ended, white or
gray, solvent weld or
gasketed style fittings. Our
prices are very competitive.
Poly Pipe
This pipe is available in ½" through 3" diameter and in utility,
standard and CSA grade. The latter two can be ordered in 75
psi, 80 psi or 100 psi rating.
CHL Item No.
1/2" greenhouse watering hose (by the foot)
950351
3/4" greenhouse watering hose (by the foot)
950352
1" greenhouse watering hose (by the foot)
950353
1/2" male end
881456
1/2" female end
881458
3/4" male end
881462
3/4" female end
881460
fitting installation labour
881455
3/4" male and quick connect
881453
3/4" female and quick connect
881452
hose clamps
881469
MISC. IRRIGATION
Drip Irrigation
Drip-Lock Fittings
Gro Hose
These tough polypropylene
fittings are designed for
attaching Twinwall Gro Hose
to manifold pipes and for
other various connections.
This is the Chapin Twinwall product. Designed for watering
greenhouse benches, outside beds and row crops, they are
manufactured from linear low density polyethylene and are
available in thicknesses ranging from 4 to 15 mil. The
ruggedness of the application determines which mil thickness
should be used. For example, fleshy plants in greenhouse
environments would use 4 or 8 mil. Outside row crops such as
blueberries would be better with 10 or 15 mil. The holes are
precision pierced and the double chamber ensures equal flow
along the length of the hose. A 200 mesh strainer should be
used in the water supply as a standard procedure.
Configuration
CHL Item No.
drip-lock x 3/4" female hose swivel
881439
drip-lock x 1/2" male pipe thread
881440
drip-lock x 0.0250 barb for snapping into poly pipe
881438
drip-lock x drip-lock coupling
881442
drip-lock x threaded cap
881444
drip-lock x 0.35" compression
881436
TPA x 0.35" compression
881434
Polyethylene Irrigation Tubing
(Microtube and Drip Line)
Turbulent Twinwall
This is the latest and most advanced gro hose. Turbulent flow
ensures greater resistance to plugging and longer runs without
sacrificing uniformity. It is available in a wide number of sizes
and configurations. Most of the common ones are listed here.
Turbulent Twinwall Table
Distribution and Micro tubing
extends emitter outlets to desired
locations and fits over barbed
outlet ports on fittings of emission
devices. Virtually every size is
available in either polyethylene or
flexible vinyl. Drip line is the term
used for the tubing (laterals) into which spaghetti tubing and/or
emitter assemblies are inserted. (The word "tube" or "tubing"
distinguishes this product dimensionally from "pipe" or "piping".
Tubing is referred to by its actual inside diameter). Typically
one run of drip line lies in the center of a double row of plants
and feeds the plants on either side. This material is also widely
used for transport to laterals.
Thickness
Spacing (in)
Flow (GPM/100’)
4
8, 9
0.4, 0.5, 0.65
Microtube
4
12
0.2, 0.25, 0.3, 0.4, 0.5, 0.65
6
4
6
Model
Description
Wall Thickness
Length
CHL Item No.
125-185 PE
3 mm (1/8") I.D.
0.30"
2000'
880140
1
125-187 (vinyl)
3 mm (1/8") I.D.
0.30"
1000'
880144
8
0.4, 0.5, 0.65
160-220 (vinyl)
4 mm (1/6") I.D.
0.30"
2000'
880135
6
12
0.25, 0.3, 0.4, 0.5, 0.65
160-300 (vinyl)
4 mm (1/6") I.D.
0.70"
1000'
880146
6
24
0.3
170-250 (vinyl)
4 mm (1/6") I.D.
0.32"
1500'
880156
8, 10, 15
2
1.5
Dripline
8, 10, 15
4
1
400-480
10 mm (3/8") I.D.
0.40"
100'
880001
8, 10, 15
8
0.5, 0.65
520-620*
13 mm (1/2") I.D.
0.50"
1000'
880006
8, 10, 15
12
0.25, 0.3, 0.4, 0.5, 0.65
600-700*
15 mm (5/8") I.D.
0.50"
1000'
880009
8, 10, 15
16
0.2, 0.25, 0.3, 0.4, 0.5
820-940*
20 mm (3/4") I.D.
0.60"
750'
880012
8, 10, 15
24
0.125, 0.15, 0.2, 0.25, 0.3
25 mm (1") I.D.
0.70"
660'
880158
1050-1174*
* Available pre-punched down to 12" spacing at an extra cost.
Note: 520-620 and 600-700 are available in 500' rolls at a 5% upcharge and 100' rolls at a 7%
upcharge. 820-940 and 1050-1174 are available in 100' rolls at a 7% upcharge.
DRIP IRRIGATION
Drip Line Fittings
There are many drip line fittings available to ease the assembly
of irrigation systems. Some common ones are listed below.
Name
We recommend that the grower should, whenever possible,
select from the third group because pressure compensating
emitters provide, by default, flow balancing. Accordingly, if a
given watering zone in a greenhouse is not level, likely the case
more often than not, plants in the zone will still receive equal
amounts of water. In fact the high end pressure compensating
emitters now have internal check valves that prevent water in
the system within a zone from draining to the low areas
between irrigation cycles resulting in more uniform crop quality
and production and simplified irrigation management. As a
consequence, the added cost of pressure compensating type
emitters is more than recovered over time in the form of higher
quality and yields and reduced fertilizer consumption.
Figure No.
Description
CHL Item No.
CHS
1
3/4" female hose swivel with screen by
400 compression (600/700/900/1200)
880274/76/78/80
CETC
2
3/4" hose thread cap by
400 compression(600/700/900/1200)
880282/84/86/88
C3TM
3
400 compression run (600/700/900) x
3/4" male hose branch
880342/41/43/45
CMA/CMRA
4
600 compression (700/900) x
1/2" / 3/4" male pipe thread
880258/60/62
CFA/CFRA
5
600 compression (700/900) x
1/2" / 3/4" female pipe thread
880264/66/68
BC
6
600 barbed insert connector
880230
BL
7
600 barbed insert elbow
880232
GROUP A) Laminar flow emitters
BT
8
600 barbed insert tee
880234
France capillaires:
125-BTC
9
barb x thread straight connector for
125-187 tubing
880202
Use with:
125-BTT
10
barb x thread x thread connector for
125-187 tubing
880206
AP-106
11
3/4"female pipe x 3/4"
female hose swivel connector
880362
12
3/4" female pipe x pipe swivel connector
880366
GP double
13
double goof plug for repairing drip line
880220
AP-8
14
figure 8 tubing end closure
(400/600/700/900)
880240/42/44/46
N-1
15
3/4" transition nipple hose
thread x pipe thread
880214
Use with:
ii) SOR:
Use with:
Petcocks
We have a variety of
on-off valves for use
with emitter line.
They are available in
common sizes from
5/8"(16 mm) to ¾"(19
mm). Less common
sizes are available
upon request.
Emitters & Emitter Assemblies for Drip
Irrigation
Emitters can be roughly categorized into three groups - laminar
flow, partially pressure compensating or flow restricting and
pressure compensating. Because the cost increases from one
group to the next, growers who feel comfortable irrigating
without pressure compensation still use emitters from the first
two groups.
CHL
CHL
CHL
CHL
No
No
No
No
............880401
............880402
............880409
............880400
GROUP B) Partially pressure compensating emitters
i) COR:
AP-110
85 cm
3 lph
100 cm
2 lph
Black plant spike
B.E. stake
-1/2
-1
-2
Prevo stake
Slotted spike
S-2 (V) stake
S-34 (combination)
2 lph
4 lph
8 lph
stake
CHL
CHL
CHL
CHL
CHL
CHL
CHL
No
No
No
No
No
No
No
............880410
............880412
............880413
............880622
............880630
............880602
............880604
-1/2
2 lph
-1
4 lph
-2
8 lph
S-34 (combination) stake
CHL
CHL
CHL
CHL
No
No
No
No
............880414
............880416
............880418
............880604
Note: the COR type "clip" on to the drip line while the SOR type "screw" into the
end of the spaghetti tube distal from the dripline.
GROUP C) Pressure compensating emitters
i) chameleon (pc junior):
2 lph
CHL No ............880160
(with no check valve)
ii) with check valve:
CNL-2 barb x barb 2 lph
CHL No ............880422
CNL-8 barb x hub 8 lph
CHL No ............880421
4-gang manifold (for use with CNL barb x hub) CHL No ............880203
Use with: angle stake
CHL No ............880623
prevo stake
CHL No ............880622
slotted spike
CHL No ............880630
MOD stake (for use with CNL bxh & 4 gang manifold)
CHL No ............880620
Red pot weight (for use in hanging baskets in lieu of stake)
CHL No ............880187
iii) Microflapper:
MF-1/2
2 lph
MF -1
4 lph
Use with: same as COR types in GROUP B
CHL No ............880430
CHL No ............880432
DRIP IRRIGATION
Punches
There are a number of punches available
for a grower to punch their own drip
line to prepare for inserting drip
emitters or emitter assemblies.
The GP global punch have
hardened steel tips which cut
decisively to make clean cut
holes. They are colour coded
for the different sizes of
spaghetti tubing.
The WP
wooden handled punch is for the
vortex emitter. The DP-1A plastic
handle punch has a bit chuck and
ejector button that permits the punch to
be used for different bit sizes. The ejector discharges the plug
from the bit. The replacement bits are green for
Microflapper,yellow for the flapper and red for other emitters.
Emitter Stakes/Plant Spikes/Support Stakes
We carry a wide range of makes and models for virtually any
application or grower preference. Refer to the selection guide
that follows for assistance in choosing the type you want.
Volume price breaks are available at 1000, 5000 and 20,000
units.
Name
Model No.
Common Application
Package
Colour(s) CHL Item No.
B.E. Stake
BED
Termination/France capillaires
bulk
black
880400
Prevo 1
PS 1
Termination/160-220 leader tube/
125-187 leader tube
100/1000
B/B/Y
880622
Plant Spike
BPS
Termination/France capillaires
100/1000
black
880409
Slotted Spike
SPS
Termination/160-220 leader tube
100/500
grey
880630
Arrow 1
MOD
Termination/125-187 tube & shutoff
100/500
black
880620
Arrow 2
MOD 90
Termination/125-187 tube & shutoff
100/500
black
880621
Wade 2
S-2
Graduated V snaps onto
0.170" through 0.350" tubing
100/1000
black
880602
Wade 3
S-34
Combo stake - closed hole for
0.187" OD, open hole for 0.187"
through 0.225" OD tubing
100/500
black
880604
Acu-Spray Stick (Advanced Technology
Flow-Control Stick)
This can solve your nursery watering problems. These sticks
spray the same amount of water to each container, basket or
tray regardless of pressure, height or line length variations.
Eliminates labour intensive hand watering - just open one valve
to water an entire section. Saves water and conserves
nutrients for optimum nursery efficiency and productivity.
Installs easily, is cleanable and comes in a variety of flow rates.
The Acu-Spray Stick has a flow-controlled rated flow of water
over a pressure range of 15 to 50 psi. This assures that each
plant receives an equal amount of water and nutrients. The
Acu-Spray Stick can be taken apart to clean any particulates
which may escape filtration. Each stick is colour coded to
indicate the regulated flow rate.
Colour Code
Controlled
Flow Rate at
10 psi (/GPH)
Spray Radius
Spray Coverage
CHL Item No.
white
3
9"
120°
880489
blue
6
15"
180°
880484
violet
10
22"
180°
880485
green
12
25"
180°
880486
yellow
16
30"
180°
880487
Tube-Weights
Tube-weights are one of the most durable and
reliable greenhouse watering products.
Pressure compensating emitters offer
uniform flow. They are available in
various tubing diameters and in various
tubing lengths. They are also available
as on-only (regular) or on-off emitters.
All tube weights are subject to volume
discounting.
Size of Tube(I.D.)
Pre-Punch/Insert Service
We can save you the labour of drip line punching and emitter
insertion. We offer this service for drip line from ½" to 1" in any
run length you choose with most combinations of stakes and
emitter assemblies to customize your drip system. Spacing
down to 2" and in whatever configuration you desire can be
ordered. Pricing for this service is dependent on insertion and
complexity of design and also varies according to drip line, run
length, emitter style and size of order. Please inquire for further
details.
Length
On-Only or On-Off
CHL Item No.
.036”
18", 24", 30"
on-only
880120/21/22
.05”
18", 24", 30"
on-only
880124/25/26
.06”
18", 24", 30"
on-only
880128/29/30
.06”
18", 24", 30", 36"
on-off
880172/73/74/75
.076”
18", 24", 30"
on-only
880132/33/34
.076”
18", 24", 30", 36"
on-off
880177/78/79/80
DRIP IRRIGATION
The use of rigid aluminum line for overhead irrigation has been
popular in the industry for decades. Although less so now, we
still offer complete systems using this time proven design. The
output and spacing of the nozzles used with the aluminum line
determines whether it is a "watering" line or a "mist" line. There
are many nozzle styles to choose from, providing varying
amounts of water or mist. Line pressure is a factor in the
nozzles' performance. As a general rule, minimum pressure of
30 psi is required for watering, 60 psi for misting.
Bow & Pin Nozzle
Watering
PIN NOZZLES
BOW NOZZLES
Colour
Flow in LPM
@30 psi
Wetting
Diameter (m)
Colour
Flow in LPM
@30 psi
Wetting
Diameter (m)
Brown
1.73
1.5
Brown
3.2
3.2
Green
2.06
1.75
Green
3.6
3.2
Grey
2.81
2
Grey
3.9
3.2
Blue
3.5
2.25
Blue
4.2
3.2
Red
4.72
2.5
Red
4.6
3.2
Orange
5.46
2.5
Orange
4.9
3.2
Black
6.76
2.5
Black
5.3
3.2
White
Plug
Plug
Violet
5.8
3.2
Accessories such as drain valves and nozzle risers are
available to minimize drip between cycles. Even with these,
the closer to dead level the line is, the better the drip control.
For pricing on full aluminum line systems complete with
nozzles and rubber inserts, please ask for a quotation. All
overhead irrigation nozzles are subject to volume discount.
Misting
Bow Mist Nozzles are available in three colours: red/white,
blue/white and grey/white. Wetting diameter is 1.2 m. and flow
rates are 1.2, 0.84, 0.46 lpm respectively at 75 psi.
i) the spray is beneath the overhead line and so the previously
unavoidable line of drip is eliminated
ii) nozzle drip at shut down is avoided.
Note: Charts I, II and III are calculated using a 36" sprinkler
spacing.
Orifice (inches)
15 psi
20 psi
25 psi
30 psi
Violet
0.032
6.6
7.66
8.45
9.25
Brown
0.035
9.12
10.15
11.01
12.29
Grey
0.044
13.47
15.6
17.17
18.5
Green
0.055
19.55
22.46
25.63
27.5
Orange
0.06
22.72
26.42
29
31.7
Yellow
0.067
29.6
34.6
39.1
42.3
Blue
0.075
35.4
41.75
47.5
52.8
Ivory
0.079
53.96
57.14
62.69
-
Red
0.087
59.5
63.5
69.2
-
Black
0.094
68.78
73
79
-
SPREADER
OR
SPINNER
YELLOW
FLAT
GREEN
KIWI
BLACK
ROUND
There are two important advantages to this anti-leak product,
All charts are calculated using a 36” sprinkler spacing
BENCH WIDTH IN FEET
FLOW
RATE
HT. 4’
5’
6’
7’
8’ 10’ 12’ 14’ 15’ 16’ 18’ 20’ 22’ 24’
O
LOW
2’
4’
G
O
O
O
O
O
HIGH
2’
4’
Y
Y
Y
B
B
B
LOW
4’
6’
O
O
O
O
O
O
O
O
G
O
HIGH
4’
6’
B
B
B
B
B
B
B
B
LOW
4’
6’
HIGH
4’
6’
G
O
O
O
O
Y
Y
Y
Y
Y
Y
O
Y
* Nozzle Colour Code: G=Green, O=Orange, Y=Yellow, B=Blue
2’
4’
6’
1.08 1.35 1.32 1.26
LOW
HIGH
2’
4’
6’
1.95 1.90 1.81 2.07
LOW
2’
4’
6’
G
2’
4’
6’
F
2’
4’
6’
G
2’
4’
6’
E
PRECIPITATION
RATE
inches per hour
EFFICIENCY
(see note below)
HIGH
Dan Inverted Nozzles
Netafim offers two inverted systems-aluminum line (rigid
system) and blue micro-jet tubing (poly line system). These
have high efficiency spray and misting nozzles that can be
installed in an inverted position thanks to a positive action
check valve or "anti-leak" developed by Netafim.
SELECTION OF SPRINKLER AND NOZZLE
CHART II
Overhead Irrigation Accessories
* Drain valve, 32 mm complete with elbow
* Female swivel coupling: 32 mm f.t. x 1 ¼" glue
(2/3 connector)
* Male coupling: 32 mm m.t. x 1 ¼" glue (1/3 connector)
* Aluminum to PVC glue kit (2 x 125 ml)
FLOW IN GPH
Colour
CHART III
* Rubber inserts
NOZZLE OUTPUT
CHART I
Nozzle Colour
Overhead Irrigation
LOW
UNIFORMITY
HIGH
1.11 1.08 1.04 0.79 0.75 0.47 0.48 0.48 0.48 0.56
0.71 0.67 0.65 0.38 0.39 0.37 0.40 0.50 0.39
2.05 1.98 0.99 0.97 0.94 0.83 0.83 0.83 0.82
0.89 0.86 0.84 0.81 0.64 0.63 0.64 0.63
F
G
E
E
G
E
F
G
E
E
F
G
E
E
E
E
E
E
E
E
E
G
E
F
E
G
E
E
F
F
E
F
F
G
G
E
F
G
E
F
F
G
E
F
F
E
E
F
G
E
E
E
E
E
E
E
E
E
G
E
G
G
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
G
E
E
E
E
E
E
* Rating Code: E=Excellent, G=Good, F=Fair
(Note: Excellent Efficiency ruling indicates a high percentage of the spray falling within the designated strip)
OVERHEAD IRRIGATION
Filtration
Electric Solenoid Valves
Solenoid valves are designed and
built for irrigation application. These
valves open and close slowly to
prevent damaging water hammer.
With PVC construction in sizes from
¾" through 3", valves come standard
as 24 VAC, normally closed (N.C.).
110 VAC and 24 VDC coil valves are
available at additional cost. Also,
there are three types of these valves;
Globe Type 2-way, Globe Type 3-way
and Full Flow 2-way. Please specify
voltage and style when ordering.
Commercial Duty, All Steel Sand/Media
Filters
Heavy duty construction, long lasting, low maintenance, high
working pressure. These sand filters are made of 5mm steel
and powder coated inside and out. The smooth, rust free,
maintenance free finish stands up to salt, sun, corrosive
fertilizers and chemicals. A series of manifolded hand valves
are used for filtration, backwash and rinsing cycles. Pressure
gauges and air vents are included. Units can be ganged in
parallel to achieve higher flow rates. See chart for sizes and
specifications.
Filter Sand (#16 Silica)
LVT Direct Burial Cable
We carry jacketed, multi-conductor low voltage cable used for
wiring 24V solenoid valves and other low voltage devices.
Individual conductors are colour coded. This cable comes on
500 ft. reels and is available in the following sizes; 18/2, 18/3,
etc. through to 18/10.
50 lb. Bag CHL Item No................................................891642
Pressure Regulators
These regulators operate wide open until
pressure reaches design setting. No
adjustment is necessary. Available in
PVC/stainless steel construction,
they simplify irrigation system
design and ensures more uniform
output systemwide.
Model
Description
Capacity
PR-10-STD
3/4" FHT x MHT
0.2 to 6 gpm
PR-20L
3/4" FPT 20psi
0.1 to 8 gpm
PR-10M
3/4" FPT 10psi
4 to 16 gpm
PR-20M
3/4" FPT 20psi
2 to 16 gpm
PR-30M
3/4" FPT 30psi
4 to 16 gpm
PR-6H
1 1/4" FPT 6psi
10 to 32 gpm
PR-10H
1 1/4" FPT 10psi
10 to 32 gpm
PR-14H
1 1/4" X 1" FPT 14psi
10 to 32 gpm
PR-20H
1 1/4" X 1" FPT 20psi
10 to 32 gpm
PR-30H
1 1/4" X 1" FPT 30psi
10 to 32 gpm
PR-40H
1 1/4" X 1" FPT 40psi
10 to 32 gpm
SAND FILTERS
Model
Specification
16”
20”
average water (gpm)
42
60
dirty water (gpm)
35
50
very dirty water (gpm)
28
40
minimum flow for backflush (gpm)
35
50
optimum flow for backflush (gpm)
50
75
filtration area (sq.ft.)
1.4
2
maxiumum pressure (psi)
120
120
bags of filter sand required
4
6
shipping weight (lbs.)
170
250
CHL Item No
891630
891631
FILTRATION
Amiad Plastic In-Line Screen & Disc
Fine Filters
Disc Element
Type
Colour
G
Micron
25
R
Br.
Br.
O
Blk.
100 130 180 250
22
50
80
450 155 120
Mesh
Through on-going research and development, Amiad has
developed and patented several innovative products. These
fine filters are available in both screen and disc cartridge
configurations, or can be field converted. Screen filters can be
used for organic or inorganic debris. Disc filters offer their
biggest advantage for organic matter because filtering is 3dimensional.
Y
P
Weavewire Screen
80
60
Y
R
W
B
G
Gr.
100 130 200 300 500 800
450 300 200 155 120
75
50
30
20
3/4”
X
X
X
X
X
X
X
X
X
1”-C
X
X
X
X
X
X
X
X
X
1”-S
X
X
X
X
X
X
X
X
X
X
X
X
X
1 1/2”-C
X
X
X
X
X
X
X
X
X
X
X
X
X
1 1/2”-S
X
X
X
X
X
X
X
X
X
X
X
X
X
2”T
X
X
X
X
X
X
X
X
X
X
X
2”T-S
X
X
X
X
X
X
X
X
X
X
X
3”TL
X
X
X
X
X
X
X
X
X
X
X
3”TL-S
X
X
X
X
X
X
X
X
X
X
X
* Disc Colour Code: G=Green, Y=Yellow, R=Red, P=Purple, Br.=Brown, O=Orange, Blk.=Black,
W=White, B=Blue, Gr.=Grey
We carry the compact and super filters and housings in sizes
from ¾" to 1 ½" in stock and many of the replacement filters.
Others can be readily ordered.
Amiad plastic filters are easy to maintain with a wide range of
flow rates and multiple filtration degrees. There is low pressure
loss and they are corrosion resistant. Besides the compact
and super plastic filters, they also offer a turboclean, a
scanaway, and a brushaway filter for automatic and semiautomatic cleaning.
Notes:
a) Models utilizing grooved plastic discs in place of
cylindrical screens offer 3-dimensional or "in-depth"
filtering. These colour-coded disc elements can be
exposed for easy cleaning. The discs are captive on a
telescopic spine and cannot fall off.
The weavewire screen cylinders are made of molded plastic
with an inserted mesh sleeve made of polyester or stainless
steel, with different filtration degrees (see chart). The direction
of flow in these elements is from inside out along the element.
Therefore inorganic suspended solids are accumulated mainly
at the lower end of the element, where they can be removed by
means of a drain valve. These elements are specially suitable
for the separating of inorganic particles and have a very low
pressure loss. Suitable for a wide range of applications.
b)
When ordering Amiad filters, whether screen or disc type,
be sure to specify mesh size required.
c)
Most models can be field converted from screen to disc
(or disc to screen). If this is done however, the filter
housing must be reversed in the line because disc
cartridges filter from the outside, screen from the inside.
The grooved disc elements consist of a stack of thin plastic
discs which are piled together around a telescopic core. Both
sides of the discs are grooved and the grooves cross each
other when piled up and tightened together. The disc element
allows in-depth filtration and has high retention capacity of
particles. The flow is out-in. The filtration is affected in two
stages; the larger outer surface operates as a screen filter and
collects the larger particles. The grooves inside the disc allow
the adhesion of the fine particles, mainly organic matter. These
are also available in a number of different filtration degrees
(see chart).
Steel In-Line Fine Filters
Amiad makes steel body filters from 2" right up to 14" in both
manual and automatic configurations. These models have
stainless steel backing cylinders inside rather than molded
plastic screen cartridges. A filter "sock" fits over the stainless
steel cylinder. Please ask for details.
For both types of cartridges, the cylinder incorporates two orings to ensure perfect sealing inside the filter housing. The
housings are available in compact and super size depending
on space and application and in sizes ranging from ¾" to 3".
FILTRATION
Controllers
We carry a full line of mist and irrigation controllers from
manufacturers such as Orbit Irrigation and Superior Controls.
There are literally hundreds to choose from. Confused? It's
hard not to be. Tell us what you want to do and we'll find the
closest match, but look at these "best sellers" first. Chances
are one of them meets your
requirements.
Irrigation Controllers
Sterling 4, 8, 12, 18, 24, 30 or
36 Station Models
• Six independent programs
that can run concurrently.
• Up to 9 daily cycle starts per
program; or, loop watering
(Sterling 12)
optional in all six programs
for unlimited cycles.
• No limit on the number of programs to which a
station can be assigned (all six if desired).
• Station timing adjustable from 1 minute to 24 hours in 1
minute increments. Seconds/minutes time base optional in
all six programs. An illuminated LED lets you know if a
program is in the seconds/minutes mode.
• Automatic, semi-automatic, manual, and timed manual
operation.
• Programmable watering calendar. The watering calendar is
factory set at 7 days, but can be changed to any length from
1 to 32 days.
• Programmable 'system check' cycle that can be initiated at
any station. Station 'On' duration programmable from 1 min,
to 15 min. (or, optionally, 1 to 15 sec. per station).
• Water budgeting feature to simultaneously change the
watering duration of all stations within a program (1% to
255%). An illuminated LED lets you know if water budgeting
is set at other than 100%.
• Single program option gives you the flexibility of having two
or more programs scheduled, but limiting automatic
operation to only that program at which the dial is set.
• Programmable rain off up to 14 days. The controller will
resume automatic operation on the day following the last
"Off" day. Program erase feature allows existing programs to
be erased individually or all at once.
• Programmable pause of 1 second to 59 seconds between
stations to allow full valve closure before advancing to the
next station.
• Programmable loop allows a program's watering cycle to
continuously repeat for a desired period. Cycles can repeat
immediately or after a programmed delay of 1 minute to 4
hours, 15 minutes.
• Program 6 can be activated by a sensor switch such as a
thermostat. Ideal for frost protection or cooling.
• Simplified program review. Program information can be
scrolled on the display.
Orbit Control Star 4, 6, 9 or 12 Station Models
• Three independent programs A, B, and C
• Station timing in one minute increments for precision time
requirements
• Four start times per program for up to 12 cycles daily
• 7-Day calendar specifies watering by day of week
• Program Odd, Even, and Interval (1 to 32 days) day watering on
A,B, or C programs
• Program "No Watering" by specific
day of week, or by daily time period
• Master valve/Pump Start
programmable by individual station
• 0 minutes to 9 hour programmable
delay between stations
• Semi automatic programmable rain
delay from 24-72 hours, 4-99 days
• Seven operation modes: Auto Manual,
Extra, Test, Rain Delay Water
Budgeting, Off
(Control Star 4)
• AM/PM or 24 Hour Clock
• Station run time adjustment available "at a glance"
• Rain sensor bypass switch
Misting Controllers
Mist Master 7 and 11 Station
Models
• Independent station settings
for "On" duration (seconds)
and "Off" duration (minutes).
• Station "On" duration
adjustable from 1 second to
(Mist Master 11)
4:15 minutes in 1 second
increments.
• Station "Off" duration adjustable from 1 minute to 4:15
hours in 1 minute increments.
• Three completely independent programs. Stations can be
assigned to more than one program (all three if desired) with
different time settings in each program. This makes it
possible for the "On" duration and "Off" duration of a station
to change automatically during the day to match the
changing misting requirements of plant material.
• Each program can be scheduled to operate automatically
for one period each day (i.e. 6:00 a.m. to 7:00 p.m.), or for
two separate periods (i.e. 6:00 a.m, to 10:00 a.m., and 3:00
p.m. to 7:00 p.m.) Separate programs can be scheduled to
operate simultaneously.
• Period of operation during which misting cycles occur can
be controlled automatically, manually, or by sensor.
Operation of any program can be controlled by a sensor
switch ("normally open" type). Program operation will start 3
seconds after the switch closes or after a programmed delay
of 1 minute to 4:15 hours. Likewise, operation will stop three
seconds after the switch opens or after a programmed delay
of 1 minute to 4:15 hours.
• Percentage function permits simultaneous change of all
station settings within a program in 1% increments through
a range of 1% to 255%.
• Any station can be turned on manually for as long as
desired.
• For extended watering, station "On" duration can be
multiplied by 60 in program #3 so that "On" duration is
adjustable from 1 minute to 4:15 hours in 1 minute
increments.
• Program changes can be made quickly and easily at any
time. Any program setting can be changed without affecting
the rest of the program.
CONTROLLERS
SC Series 1, 4 or 8 Station Models
• Solid state, no moving parts.
• Complete program visible on
face plate.
• No hidden memory.
• 24-hour display shows station in
progress.
• Raintight Case.
• Built-in 24V class 11 transformer.
• Designed to operate one 24VAC Solenoid per station (6
watts max.) Station run time adjustable from 1 second to
255 seconds. On 4 and 8 station models, the watering time
for all stations included in the program will be the same.
• Interval between watering starts adjustable from 1 minute to
255 minutes.
• Watering cycles can be programmed to repeat continuously,
or for a definite period (1 to 15 hours) each day. For
example, cycling could be set to begin at 5:00 a.m. and
continue to 8:00 p.m.
• SC4C and SC8C models only: While sequencing, there is a
ten second delay between stations to allow each valve to
close completely before the next valve opens.
• Watering cycles can be activated or deactivated with manual
start and stop switches.
Solar 3B has an extra input for thermostat to boast misting on
hot days.
Solar 12C can be set to continuously display light intensity in
foot candles, watts per m2, kilolux or umoles/sec/m2.
Solar 3B
Solar 12C
Solar Sensor LX5
One comes with each solar controller and can be installed up
to 200 ft. from the controller using shielded cable or regular
signal cable if separated by large distance from electrical
noise.
Soil Tension Control Meters
Solar Misting and Irrigation Controllers
Davis brand solar controllers
automatically adjust misting with
changes in sunlight, thereby
providing water to plants in
relation to their need. In the solar
mode, watering can be set to
repeat every 1 to 127 solar units.
One solar unit is accumulated when a light intensity of 2000
foot candles shines for one minute. This is equal to 186 watts
per m2 for one minute or a solar accumulation of 0.02 moles
per m2.
Programming: - 1 sec. increments from 1 to 127 seconds of
mist per zone
• multiplier switch (10X) extends seconds on for irrigation
purposes
• independent programming by zone
• dual mode
• repeat interval in either "solar" or "minutes" mode
• zones may be in solar or minutes mode independently
• 1.5 amps @ 24VAC outputs
• only one zone runs at a time
Three models to choose from:
• Solar 3B 3-zone controller
• Solar 6B 6-zone controller
• Solar 12C 12-zone controller
Hortimetre P
The Hortimetre P probe measures soil
tension (a measurement of humidity) using a
new accurate technology and delivers all key
information to the user - without any priming
or complex installation procedure. As the
Hortimetre M, it will keep costs down while
quality and quantity go up. It is easy to use
without a lot of preparation. Good for the
ornamental tree nursery or greenhouse and
garden centres.
Hortimetre M
The Hortimetre M probe measures capillary
mat tension (a measurement of humidity)
using a new accurate technology and delivers
all key information to the user - without any
priming or complex installation procedure.
This information in turn will help with
downsizing irrigation and fertilizer expenses
and up-scaling the growth quality and quantity
of the crops. It can be used as a stand-alone
unit or incorporate into a network, using wired
or wireless communication. Good for the
ornamental tree nursery or greenhouse, or
vegetable greenhouse.
CONTROLLERS
Turf Irrigation
We have been a distributor of Orbit® Irrigation products for ten
years and can honestly say that Orbit has some of the most
advanced and best priced irrigation controllers and equipment
on the market today. We are proud to be associated with Orbit.
We stock a comprehensive range of Orbit products, but
because of space constraints, we cannot show everything in
our catalogue. If you do not see what you are looking for,
please call our sales department and one of our helpful staff
will be delighted to assist you. Also, Orbit has an excellent
website that may help with your questions at
www.orbitonline.com
Orbit Professional Controllers
Control Star
Features:
• Available in 4, 6, 9 or 12 station, indoor or outdoor mount
• Indoor models: 57254, 57256, 57259, 57252
• Independent dual programs
• Hands-on mechanical program controls
• Four manual or semi-automatic modes
• 14 day programming
• Mechanical circuit breaker
• Master-valve/pump start
• 24 hour rain delay
• Four start times for each program
• Back-up safety program
• Odd and even day watering
• 9 volt battery back-up
• UL and ETL listed, CSA approved
Outdoor Model Features:
• Heavy-duty weather resistant cabinet with lock and key for
outdoor installation
• Outdoor models: 57344, 57346, 57349, 57342
• Primary and secondary surge protection
• Strain relief for safety on high voltage input wiring
• 1" inlet for 24 volt control wiring and ½" conduit connector
for 110 volt wiring
Super/Dial Star
Features:
• Available in 4, 6, 9 or 12 station, indoor
or outdoor mount
• Indoor models: 57564, 57566, 57569,
57572
• Manual, semi-automatic or automatic
modes up to 6 start times per day per
station
• Non-volatile memory
• Large easy to read display
• Master-valve/pump start
•
•
•
•
•
•
•
24, 48 or 72 hours rain delay
Four start times for each program
Back-up safety program
Odd and even day watering
2 "AA" battery back-up
Transformer power input 120 VAC
UL listed and CSA approved
Outdoor Model Features:
• Heavy-duty weather resistant cabinet with lock and key for
outdoor installation
• Outdoor models: 57664, 57666, 57669, 57672
• Primary and secondary surge protection
• Strain relief for safety on high voltage input wiring
• 1" inlet for 24 volt control wiring and ½" conduit connector
for 110 volt wiring
Super Star with Remote Control
Features:
• Available in 6 and 12 station
indoor models
• Models: 57586, 57592
• Rain delay program - 24, 48 or
72 hours
• Manual, semi-automatic, or
automatic modes up to 6 start
times per day per station
• Built-in semi-automatic
programming with 2, 10, 30 and
60 minute watering mode
• Non-volatile memory
• Battery back up
• Master valve/pump start
• Odd and even day watering
• Touch pad control with audible tactile response
• Easy touch code matching for transmitters
• Unique electronic circuit breaker
• UL/FCC compliance, No FCC license required.
Parts and Service
We stock a number of Orbit parts and can order many others.
We also can help you design watering systems to suit your
exact needs. Please speak to a sales representative or call our
office and one of our insides sales people will help you.
TURF IRRIGATION
Hose Bib Timer & Valve
Orbit Professional Electric Valves
Model 62001 - Hose Faucet Controller
Solenoid Valves - Models 57200, 57211, 57203, 57210
Features:
• Easy to install to any outdoor hose faucet
• Battery-operated automatic water controller & valve
combination
• Standard 3/4" and 3/4" BSP (international) hose thread
connections
• Water-resistant design
• Removable controller can be programmed anywhere
• Swivel base allows the controller to be adjusted to a
convenient viewing angle
• Up to four start times per day
• Manual on? feature for quick temporary watering
• 24-hour rain delay
• High quality diaphragm valve
• Latching solenoid uses very little power to open and close
the valve
Features:
• Available in 3/4" and 1"
• Available with or without flow control
• Available in threaded or solvent weld
• Durable, non-corrosive plastic construction
• Unique balanced diaphragm design
• Safe, low voltage solenoid
• Manual operated internal bleed
• Self-cleaning diaphragm scrubber
• Sealed solenoid with low power consumptions
• Molded thermoplastic elastomer diaphragm (NSF 61 listed)
Model 62015 - 2-Hour Hose Faucet Controller
Model 57200 - 1" electric in-line thread - no flow control
Model 57211 - 1" NPT in-line valve with flow control
Model 57203 - 3/4" electric in-line thread - no flow control
Model 57210 - 3/4" in-line valve with flow control
Micro-Valve - Models 62005 and 62006
Features:
• Easy to install to any outdoor hose faucet
• Battery-operated automatic water controller & valve
combination
• Standard 3/4" and 3/4" BSP (international) hose thread
connections
• Water-resistant design
• Up to four start times per day
• Manual on? feature for quick temporary watering
• High quality diaphragm valve
• Latching solenoid uses very little power to open and close
the valve
• Set daily, 2nd, or 3rd day watering intervals. Daily, 2nd, 3rd,
4th, 7th
Features:
• Available in ¾" hose bib and pipe thread
• Excellent for low pressure or low flow
• Durable, non-corrosive plastic construction
• Operates with standard 24 VAC sprinkler timer
• Model 62005 - Hose Bib valve ¾"
• FHT x ¾" MHT
• Model 62006 - Standard low flow valve ¾" NPT (24 volt)
ORBIT IRRIGATION
Orbit Valve Boxes
Orbit Sprinkler Heads
6" Circular Valve Box - Model 53021
Satellite Sprinkler Head - Model 55010
Features:
• Interchangeable nozzles - no tools required
• ½" inlet
• Outlet trajectory: 25°, 8' max
• Maximum radius: 50'
• Recommended spacing: 20' - 40'
• Optimum working pressure: 15 - 80 psi
• Discharge: 2.5 - 4.0 gpm
• Precipitation rate: 0.2 - 0.3 in/hr
Orbit Rotor Sprinkler Head - Model 55161
Features:
• Quiet, smooth rotating spray
• Ideal for medium and large area
coverage
• Easy dial adjustable arc from
40° - 360°
• Rubber cover keeps dirt and
grit out
• Complete set of 12
interchangeable nozzles
• 2 year unconditional guarantee
• Gear drive pop-up
Features:
• Ideal for one sprinkler control valve or drip manifold
• Structural foam molding
• Twist locking cover
• 6 ½" diameter x 8 ¾" deep
10" Circular Valve Box - Model 53024
Features:
• Ideal for covering control valves
• Twist locking cover
• 10 " diameter x 10 ¼" deep
12” Standard Valve Box - Model 53953
Accessories:
#55070
#55071
#55072
#55073
key
nozzles
low angle nozzles
nozzle insertion collar
Features:
• Resistant to moisture
• UV stabilizers with anti-oxidants
• Built-in nut for locking lid (bolt not included)
• Overlapping lid
• Black body, green cover
ORBIT IRRIGATION
Unit Heaters
While we are the first to point out that forced air heating is
inferior to hot water for greenhouse use, it is simply the most
practical in certain circumstances. These circumstances range
from issues of economy or economic viability to greenhouse
size, location, and type. We can assist you in reaching a
decision in a forced air vs. hot water deliberation.
At HydroGardens, we carry two major lines of unit heaters
suitable for greenhouse use - Modine and Lennox. While
heater manufacturers typically produce their heat exchangers
from aluminized steel, most offer stainless steel exchangers
and, for the greenhouse environment, they insist on it to avoid
loss of warranty coverage. Lennox is the exception in a field
of 10+ builders. Their default exchanger, the aluminized one,
carries a ten year warranty, even if used in a greenhouse. Their
stainless steel upgrade carries a fifteen year greenhouse
warranty.
Propeller Model #
Blower Model #
Input (BTUH)
Vent Size (In.)
Weight (lbs.)
PDP30S
N/A
30,000
3
64
PDP50S
BDP50
50,000
3
117
PDP75S
BDP75
75,000
4
152
PDP100S
BDP100
100,000
4
164
PDP125S
BDP125
125,000
4
221
PDP150S
BDP150
150,000
5
221
PDP175S
BDP175
175,000
5
237
PDP200S
BDP200
200,000
5
315
PDP250S
BDP250
250,000
6
315
PDP300S
BDP300
300,000
6
339
PDP350S
BDP350
350,000
6
428
PDP400S
BDP400
400,000
6
498
Sizing Unit Heaters/Heat Loss
If you supply us with the following information, we can
calculate your heat loss and size the proper unit heater(s) to
the application.
• type of greenhouse (glass, double poly, polycarbonate, etc.)
• length and width of greenhouse
• height of greenhouse to gutter (or to peak on a cold frame or
freestanding structure)
• planned use (crop type & months of operation)
• degree of dependence on unit heater(s) (sole heat source or
combination with other source such as hot water)
• fuel - natural gas, propane or #2 fuel oil
Propeller and blower models are available from 30,000 up to
400,000 BTU.
Note that blower models are required if discharge air duct is to
be affixed directly to the heater. For free air discharge or
discharge to a tube fan or fan jet pick-up plenum, propeller
units are acceptable.
The model numbers that follow
identify heaters with power vented
exhaust, spark ignition, and
stainless steel heat exchangers.
Other options, such as stainless
steel burner, outside combustion
air square-to-round transition
adapters, propane conversion, etc.
are available at extra cost. Please
ask for details.
LF24 series for greenhouse application are available from
100,000 up to 390,000 BTU in direct drive propeller models
only. Models up to 195,000 BTU have one propeller fan;
250,000 up to 390,000 BTU have two fans. The Lennox
propeller fans are rated for direct ducting of the discharge air.
As such, Lennox does not offer blower style models.
Model
Input
(BTUH)
Output
(BTUH)
Vent Size
(In.)
Gas Piping
(In.)
Weight
(kg.)
LF24-100S
100,000
80,500
4
1/2
64
LF24-125S
125,000
100,625
4
1/2
68
LF24-150S
150,000
120,750
4
1/2
75
LF24-200S
195,000
156,000
5
1/2
79
LF24-250S
250,000
201,250
5
3/4
129
LF24-300S
300,000
241,500
5
3/4
138
LF24-345S
345,000
276,000
6
3/4
141
LF24-400S
390,000
312,000
6
3/4
143
The above model numbers
identify heaters with power vented
exhaust, direct ignition (as distinct
from spark ignition) and stainless
steel heat exchangers. To order
aluminized steel heat exchangers,
substitute an "A" for the "S" in the
model number.
Options for the Lennox line include combustion air separator,
polytube adapter, LPG propane conversion and venting
package, all available at extra cost.
MODINE/LENNOX HEATERS
GreenStart Electric Soil Heating Cables
Poly Duc Vent Tubing (PDV Tubing)
Plastic covered soil heating
cables for faster propagation in
soil or growing media. It is an
economical alternative for zone
heating.
Recommendations
are for 3 feet of cable per 3
sq.ft. of growing area which
results in the recommended 12
to 15 watts per sq.ft. Cable is
laid in parallel runs approximately 4 ½ ft. apart. Cable must be
used with a thermostat. Minimum cable spacing and bending
radius is 1". Cable cannot be shortened or lengthened. The
following sizes are available.
Only the best 4 mil UV stabilized LLD poly is used in our
product. Available in standard, custom or unpunched.
Standard is 2" holes on two foot centres at 4 and 8 o'clock but
a number of other hole sizes are available and they can be
punched on whatever centres and in whatever location you
choose. Sizes we generally keep in stock are 6", 8", 12", 16",
18", 24", and 30". When ordering, you must specify diameter
and layflat dimensions or diameter only (not layflat only) and
roll length required. If custom punching is required, you must
also specify hole size, location and spacing.
Length
Watts
20ft.
100
30ft.
150
60ft.
300
80ft.
400
100ft.
500
120ft.
600
160ft.
800
200ft.
1000
240ft.
1200
Poly Inflation Units and Accessories
Deluxe poly inflation unit with hose and adapters for setting up
new tubing.
CHL Item No ..................................................................770728
Standard poly inflation unit with hose and vent discharge only
EZ Heat SL-2G Thermostat for Heating Cable
CHL Item No ..................................................................770729
A single pole, single throw heating thermostat with a six foot
capillary. Integral duplex receptacle for plugging in up to two
heating cables. 12 amp rating. Temperature range from 40° 100°F. CSA approved.
Standard poly inflation unit with no accessories
CHL Item No. ..................................................................850917
Inflation unit replacement motor for pre-1995 units.
CHL Item No ..................................................................770724
Root Zone Heating
Small diameter EPDM tube bench top heating system. Placed
on 2” centres, this system provides the optimum growing
environment for propagators and plug producers. We offer the
component parts for do-it-yourselfers or can supply a complete
system with manifolds, circulating pumps, etc. Call today for a
free quotation.
Description
CHL Item No ..................................................................770730
CHL Item No.
Tubing by the foot
881470
3/4” manifold by the foot
881478
1” manifold by the foot
881479
1 1/4” manifold by the foot
881480
Brass insert adapters, each
881472
Brass air bleed, each
881473
Grabber track, by the foot
881474
Note: other replacement motors for newer models are also available.
Call with the model number for availability and pricing.
Duc Vent Tube Hangers
A reusable clamp for hanging PDV tubing to a taut overhead
wire.
10 per package CHL Item No ........................................930950
HEATING CABLES/POLY DUC
VENT TUBING
The Argus System
The Argus System is designed for
comprehensive control in a wide
range of agricultural, horticultural,
and other protected production
system applications. Its extensive
features include: sensor measurement, equipment control,
data logging, monitoring, and alarms. Standard system
features include comprehensive software modules for
controlling environment, irrigation, and nutrient management,
as well as many other types of equipment control.
Each Argus System consists of:
• a fully integrated environmental and irrigation control
system
• an advanced data recording program
• a sophisticated and highly configurable equipment
monitoring and alarm system
For maximum safety and reliability, Argus uses dedicated
control hardware and software. The PC that is used to access
the Argus System does not control the greenhouse. All control
programs and settings are located and run on dedicated Argus
controllers that have been specially built for this purpose. They
provide reliable, real-time operation in dynamic horticultural
environments. Whether your PC is directly connected or
operated remotely, dedicated Argus controllers are constantly
monitoring and managing your equipment. In this way, even if
your PC is turned off or breaks down, the controllers continue
to do their job. With distributed control, each controller on the
network maintains its own settings and programs, and keeps
working even if there are problems with other components of
the system. The modular and distributed nature of the system
enables Argus to engineer a complete and integrated control
solution for any sized operation. Its distributed control
enhances safety and reliability and its modular components
allow custom configuration and component location thereby
reducing wiring and installation costs
Typical System Components
A typical Argus System contains
the following components:
Argus Controller One or more
Argus Controllers form the heart of
your system. The Argus Control
System consists of dedicated and
distributed computer modules
custom configured for your
operation. All control programs
are executed from these controllers. The controller determines
how and when your equipment should operate based on
sensor readings and user settings.
Communications Networks You will never outgrow your
Argus system. The control system can be expanded to suit
your needs. You can add
additional modules to connect
sensor inputs and equipment
control outputs. You can also
connect additional controllers.
All
Argus
outputs
are
configurable with a range of
signal types to match your
equipment. Extremely large
systems can be configured in this fashion. By simply adding
more controllers as you need them, your Argus System will
grow with you.
Sensors - Inputs Sensors connected to
your control system are used to
monitor current conditions and
detect changes. High resolution
A/D (Analog to Digital) inputs
ensure accurate measurement
and sensitivity. When you order a
system, Argus makes sure you
get all the sensing capabilities
you need to monitor and control
your operation. They even provide
backup sensors for critical situations
such as climate temperature control. Nearly any industrial
sensor can be connected, although some types may require
additional signal conditioning. In most cases they can also
interface to your existing sensors or custom sensors that you
provide.
Outputs Argus' flexible equipment control outputs can be used
to manage any type of equipment. All output control is
designed to operate as Class-2 low-voltage equipment. This
reduces your wiring costs and is compatible with many types
of greenhouse control equipment. Low-voltage control wiring
(24V, AC) also allows operators to safely open enclosures and
use the manual override switches. Each output is equipped
with a relay control module that is matched to your equipment.
This includes:
• digital style outputs are used for ON/OFF switching as well
as high and low frequency pulse width modulation and
pulse period modulation
• tri-State-Floating outputs for reversing motor control such as
roof vents and mixing valves
• analog control outputs for variable frequency drive
Output modules have built-in manual override switches for
quick testing of field wiring or equipment, and for emergency
overrides of equipment control.
Modem Each Argus System is equipped with a telephone
modem used to communicate directly with the control system
from remote PC locations. Remote access also allows the
Argus Customer Service personnel, at your request, to connect
to your system for diagnostic purposes. This enables Argus to
provide fast, efficient problem solving without the need for
expensive on-site service visits. Remote Internet access
options are also available.
ARGUS CONTROLS
Some examples:
Operator Access PC You use a PC to access controller
information and adjust control settings with the Argus for
Windows Operator Access
Program. A local PC is
directly connected to your
control system. Argus can
provide the PC specifications
that are needed. Argus can
supply the PC, however, in
most cases, customers
supply their own.
Argus for Windows Operator Interface Program
This is the "Mission Control" software that enables you to
access all of the control programs, system settings, and
readings on your Argus Control System. By taking advantage
of the many customizable features such as user labels,
shortcuts, windows, graphics placement, and line drawing you
can create your own personalized access screens to meet your
specific control and system monitoring needs. Argus for
Windows features optional network licensing to permit
unlimited client access to your control system over wired and
wireless Ethernet LANs and the Internet.
Real-Time Equipment Control
The Argus Control System
includes a comprehensive suite
of
specialized
equipment
control programs designed
specifically to control the
equipment systems used in
protected environments. These
programs are set up and fully
configured to match your
operation before Argus ships your system. Each of these
programs are loaded with a
depth of features not available
in most competing systems. In
addition, additional programs
can be selected as needed.
They ship a complete selection
of the latest programs with each
new system, so even if you
don't need a particular control
program now, you'll have
access to it in the future at no
additional charge should you
need it .
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Boiler controls and protection
Multi-Boiler rotation management
Pipe temperature-controlled mixing valves
Boiler heat storage for CO2 extraction systems
Modulating roof vents and wall vents
Fan and Multi-Fan ventilation
Shade, blackout, and thermal curtains
CO2 enrichment
High-intensity-discharge (HID) lighting
Evaporative cooling and humidification
Mist and fog
Pads
Irrigation system capacity and feed management
Irrigation valve management for drip, spray, overhead, ebb&
flood, and boom systems.
• Irrigation decision making
• Nutrient control and nutrient injection systems
Custom Control Applications In addition to special programs
for equipment control, the Argus system contains an array of
generic control programs to handle a wide range of custom
control challenges. All of these control functions are field
programmable. Program modules include: enhanced
equation-based decision programs, math programs, multi-day
averaging programs, generic modifier programs, multi-output
programs, sensor multiplexing
Manual Overrides Each piece of Argus controlled equipment
can be manually overridden by the operator from the IBMcompatible PC terminal, which may be on-site or connected to
the site over the telephone network using a modem.
Climate Control
Climate control settings include diurnal (daily schedules) or
multi-day schedules. Specific temperature and humidity
targets can be defined for up to 4 periods of the day with
smooth ramping between periods. Astronomical (solar dawn
and dusk) or regular times may be used to define each period.
Almost any environmental profile can be created with these
settings. Individual equipment settings can be synchronized
with the climate control settings. Some examples are:
supplementary lighting, photo period lighting and blackout,
shading and thermal curtains, pipe temperature settings.
Control objectives such as heat boosts, plant activation,
differential set-points (DIF), fumigation and post-fumigation
regimes can be set up to work automatically using these
settings.
Climate Control includes a wide range of settings that may be
used to define or modify control response based on weather
conditions or other criteria. Users that do not require this level
of complexity simply don't use these features.
Argus uses advanced Control Strategies that anticipate
changes, and respond to changing conditions before the
climate deviates from the target. The result is smooth, accurate
control with better energy efficiency and reduced equipment
operation. Primitive control strategies such as staging or
proportional control may still be used by Argus in specific
ARGUS CONTROLS
applications, but generally do not perform as well as the more
advanced control strategies. The advanced strategies are
easier to use since the operator no longer has to worry about
adjusting set points and stages to compensate for equipment
cycling and can instead focus on actual control objectives.
Monitoring and Alarms
Event Recording Records of equipment operation or other
events are very useful when considering maintenance or
reviewing equipment performance or reliability. With the Argus
system, you can configure event records to track any system
parameter or sensor value. For example: track operating hours
on fans evaluate belt wear or motor failures on fans, count how
often a unit heater is cycled on and off, track natural gas
consumption (operating times) for fixed-firing-rate heating
appliances, such as infrared or unit heater heating systems.
Alarms The Argus System includes a comprehensive Alarms
feature that let you set up very specific alarm conditions for
almost any variable. Careful use of these alarms enables
"Management by Exception", where the system is constantly
looking for 'out of bounds' conditions and let's you know as
soon as a problem occurs. Alarms can be configured for any
measured parameter. All alarms can be chained or linked to
other alarms to enable more sophisticated multi-parameter
alarm conditions. Powerful alarm configuration programming is
provided to specify how and when each alarm should
annunciate depending upon its user assigned priority. For
example, non-urgent alarms can be configured to annunciate
silently as a software message in the operator program while
more important alarms can be set to ring audible local devices
or to activate phone dialers for remote alarm messaging.
Modem alarm lists are provided in the software for emergency
callouts.
deviation, plus or minus, from another value. Examples of
this type of alarm include applications where two sensors
are used to "guard" each other. Excessive deviation might
indicate a sensor or equipment failure.
• High and low sensor failure alarms - these alarms are
used to warn when a sensor is producing readings that fall
outside of the possible range, indicating a probable failure
of the sensor.
All alarms have selectable annunciation priorities, and
programmable time delays to reduce false alarms. Alarms
annunciate only while active, and can be temporarily disabled
to allow time to correct the problem, before automatic rearming of the alarm. All alarms must be acknowledged by the
operator, ensuring that the operator will always be aware of
alarm conditions, including those that correct themselves
without operator intervention. Each control function can be
programmed to take alternate action when associated sensor
failures are detected. Alarm conditions can be coupled to
alarm outputs on the system for audible alerts such as bells
and sirens and to operate emergency dialers.
Data Recording
The Argus system provides extensive data recording and
graphical analysis capabilities. You can continuously record
the value of any system parameters including sensor readings
and control variables. You can record any data point from your
control system at your own selected sampling interval. This
stream of real-time data can then be graphed and analyzed
using the new Argus Graph tool. This handy new feature further
enhances the already powerful controller-based Data
Recording utility that records 15-minute averages based on
one-second measurement intervals. This new data streaming
method will be of particular interest to researchers who
sometimes need to record higher frequency point-sample data
for experiments. It's also handy for anyone who needs to track
fast-changing events, or troubleshoot equipment operation.
Sampling frequencies can be as high as one or two seconds,
although you may need to balance this against higher network
loads. You can now choose between the speed and storage
efficiency of the standard 15-minute averaged data or the
sampling detail and response of Argus PC Data Streaming.
Some of the features include:
• High and low absolute alarms - if the alarmed value rises
above or falls below a set value. An examples of this type of
alarm would be a high temperature or low temperature
alarm in a climate.
• High and low floating alarms - if the alarmed value rises
above or falls below another value that varies, for example,
a climate setpoint. An example of this type of alarm would
be an alarm that will activate whenever the temperature
drops to far below the current heating set point. This type of
alarm will "track" the heating setpoint automatically.
• Linked alarm conditions- a master alarm is raised when
pre-defined combinations of other minor alarms are also
active. An example of this type of alarm would be a low
greenhouse temperature alarm that will activate only if it is
also cold outside.
• Deviation alarms - alarmed value exceeds a given
ARGUS CONTROLS
Control temperature, humidity, energy curtains, lighting, CO2,
irrigation, misting and fog. It is self-contained and does not
need a Personal Computer to operate.
Wadsworth Control Systems
Wadsworth knows that no one control is right for everyone, that
is why they make 6 models of STEP controls. Their climate
controllers ensure the equipment in your greenhouse works
together. They operate the right amount of equipment to
maintain the climate for growth. All of these controls are easy
to use - designed to make your job easier, not more
complicated.
All Wadsworth STEP controllers: • improve crop quality
• reduce operational costs
• reduce energy bills
• provide labour savings
• allow you to consistently
reproduce top results
STEP 50A
The STEP 50A is a good choice for small growers with one or
two vents. With its three cooling stages, you can easily
integrate three stages of cooling a vent that opens and closes
in three steps. The STEP 50A provides two stages of heat,
allowing growers to better manage their heating requirements.
CHL Item No ..................................................................850202
STEP 500
The STEP 500 is ideal for larger
growers who may not yet be at
the stage of wanting to be fully
environmentally controlled by a
computerized system. It has
three stages of heating and five
stages of cooling. After a power
failure, all equipment comes on
gradually to control temperature.
A locking door secures your
settings.
CHL Item No ..................................................................850200
EnviroSTEP
The EnviroSTEP is a fully
integrated
computer
that
controls a single zone. Growers
can combine this with the
VersiSTEP and microSTEP/SA
for multiple greenhouses. With
the EnviroSTEP's twelve outputs
you can control the majority of
equipment in your greenhouse.
Features:
• 3 set point periods: day, night and DIF plus programmable
ramp rates for full control
• 12 relay outputs with manual override switches.
• Replaceable 10 amp DPDT relays
• 2 analog outputs (0 to 10VDC) control variable speed fans
and modulating valves
• 7 analog input channels connect light, CO2, RH (Relative
Humidity) and temperature sensors
• 4 digital detector input channels read precipitation, wind
speed/direction sensors.
• Records all input and output status in 15 minute increments
• Alarm outputs with programmable thresholds
• Includes aspirated temperature and humidity sensing
module with 100' of cable and a solar-shielded outdoor
temperature sensor
• Fahrenheit or Centigrade selectable
• Industry's largest display screen with 8 lines, includes report
logs and graphing functions
• 4x4 keypad for easy programming
• Anodized aluminum cabinet 16" x 16" x 5" with locking door,
protects against sunlight and moisture
MicroSTEP/SA
The microSTEP/SA is a
computerized control for 1-8
zones.
Growers can use
multiple MicroSTEP/SA’s or
combine
with
all
three
MicroSTEP/SA, EnvironSTEP
and VersiSTEP. With the
EnviroSTEP's twelve outputs
you can control the majority of
equipment in your greenhouse.
Control temperature, humidity,
energy curtains, lighting, CO2,
irrigation, misting and fog. It is
a self-contained and does not
need a Personal Computer to
operate.
Features:
• 40 relay outputs with manual override switches.
• 32 analog input channels connect light, CO2, RH and
temperature sensors
• Alarm outputs with programmable thresholds
temperature sensor
WADSWORTH CONTROL
• anodized aluminum cabinet 40" x 26" x 6" with locking door,
protects against sunlight and moisture
•
•
•
•
thermal overload protection - automatic reset
quick reversing
1600 R.P..
intermittent duty
1 3/8" CHL Item No ........................................................930812
VersiSTEP
The VersiSTEP is the newest product in the Wadsworth lineup.
This fully integrated computer provides 24 outputs with multizone control. If your application calls for more than just the
basic VersiSTEP, add the optional expansion unit and 16 more
controlled outputs without the cost of a second computer. Also
combine the VersiSTEP with EnviroSTEP and MicroSTEP/SA
controls on a single network that economically puts control
power where you need it in the greenhouse. The VersiSTEP's
24 relay outputs operate most any greenhouse equipment
system. Heating, cooling, light level, CO2 concentration and
watering are all at your fingertips.
Features:
• multi-zone control allowing management over several
environments
• 24 relay outputs with the ability to add 16 additional outputs
all with manual override switches
• 32 analog input channels connect light, CO2, RH and
temperature sensors
• Alarm outputs: relay with programmable temperature and
RH thresholds, plus power failure
temperature sensor with 25' of cable
• NEMA 4 cabinet - aluminum 32" x 24" x 5" with locking door,
protects against sunlight and moisture in the greenhouse
environment
Vent Automation
Wadsworth VC-100A
The VC-100A offers simplicity in design, installation and
operation for the smaller greenhouse. The VC-100A lifts up to
75' of 4' fiberglass roof vent or up to 100' of 4' fiberglass side
vent with rack and pinion drive. Vent capacity ratings are not
applicable with use of elbow arms.
Features:
•
•
•
•
•
adjustable torque limit switch assembly
output torque 500in/lb
total ratio 1900:1, final output 0.84 R.P.M.
1/20 horsepower - T.E.N.V. motor
115 VAC, 60 Hz, 0.68 amp
Wadsworth VC-2000
The VC-2000 is our most
powerful vent machine. It meets
the challenge of long and heavy
runs. The VC-2000 will lift up to
325' of 54' fiberglass roof vent
with rack and pinion drive. Vent
capacity ratings stated are not
applicable with use of elbow
arms.
Features:
•
•
•
•
•
•
•
•
•
adjustable torque limit switch assembly
output torque1 500in/lb
total ratio 1350:1, final output 1.2 R.P.M.
1/5 horsepower - T.E.F.C. motor
115 VAC, 60 Hz,2.5 amp
thermal overload protection - automatic reset
quick reversing
1600 R.P..
continuous duty motor
1 3/8" CHL Item No ........................................................930832
Incremental Model (I)
The incremental controller opens a vent in three stages as the
temperature rises. This unit is ready to connect to a three
stage thermostat, STEP 50A or STEP 500. It can control three
additional vents equipped with model 2R controllers
(following). Each of the slaved vents will move in unison with
the incremental master. The model (I) controller includes open
and close limit switches.
In addition, the incremental model accepts an external
wind/rain override signal from an optional weather guard unit.
During rain or high wind, the override forces the (I) control to
close the vent(s). When the wind calms or the rain stops, the
vent(s) resume normal operations.
1 3/8" CHL Item No ........................................................930830
Limit Switch Model (LST)
The LST model features open and close limit switches for
additional safety. Its built-in transformer permits automatic
operation from a STEP controller or a thermostat. It easily
converts to computer control.
1 3/8" CHL Item No ........................................................930829
WADSWORTH CONTROL
Two 24V Relays Model (2R)
Time Switches
The (2R) model is computer-ready or it can operate as a slave
to an (I) or (LST). For additional safety, the (2R) model comes
complete with open and close limit switches. It does not have
a transformer and it requires a low voltage source.
In the absence of a computer or Wadsworth STEP controller,
these vent drive systems can be operated by thermostatic
control as follows:
We offer a wide range of time switches, both electromechanical and electronic. Some of the more popular ones
are described here. If your requirements differ, please contact
us for assistance.
VC-100I/I, VC-100A/LST. The VC-2000/I and VC-2000/LST can
be controlled by thermostat model A36AHA-50, 4 stage
thermostat.
A36AHA-50 CHL Item No ..............................................850904
VC-100A/2R and VC-2000/2R can be controlled by thermostat
model A80ABA-2 proportional thermostat. (Custom Order)
Standard 24 hr "On-Off" Timers
Model T-101-70 (SPST switching)
Model T-105 (SPST switching)
Both of these models offer up to 12 "on-off" operations per day
depending on the number of trippers used. Both are motor
load rated. One "on" and one "off" tripper is furnished with each
timer. Additional tripper sets are available , one "on" and one
"off" per set, and will fit either model.
Model T-101-70 CHL Item No ........................................850800
Rack and Pinion Systems
Wadsworth Powerrack
A perfect compliment to your Wadsworth vent drive system.
Available in both straight and curved configurations in rack
lengths from 18" to 66" and with pinion bearings for either 1" or
1 ¼" vent shafting.
The Powerrack is designed
and built to operate your
vents smoothly and reliably
even while tolerating less
than perfect vent alignment.
Standard features: • wide load-bearing surfaces
• replaceable parts: every part is
replaceable using ordinary hand tools
• free from corrosion: aluminum rack and
housing, zinc pinion gear, tough Nylatrol
bearings
• easy alignment rack works even when
it's not perfectly square with the vent
• economically priced
When to use?
Ordinarily growers use straight racks. However, when space is
tight such as near an aisleway, a curtain system or such, the
curved rack offers welcome additional clearance. They are
available in straight racks from 18", 36", 42", 48", 53" and 66".
The curved racks are available in all sizes except 18".
Note: There is 6" of rack movement per revolution of drive shaft
on all models.
Model T-105 CHL Item No ..............................................850802
24 Multiple Operation Timers
Model T-1975
Up to 96 "on-off" operations per day in increments of 15
minutes each. 96 permanently attached trippers. Trippers
slide in and out of dial. Day skipper wheel allows you to omit
operation on selected days of the week. SPDT switch.
CHL Item No ..................................................................850822
Model T-1905
Up to 96 "on-off" operations per day in increments of 15
minutes each. 96 permanently attached trippers. Trippers
slide in and out of dial.
CHL Item No ..................................................................850822
Short Duration Multiple
Operation "Cycle"
Timers
Similar design to Model T-1975
but without short duration dials.
SPDT switch. Each timer is
supplied with 12 trippers. Note:
additional brass trippers, 12/pak,
are available to fit T-1975 and all
C88 models.
Model
Dial Cycle
Incremental
Incremental
Operation Time
CHL Item No.
Shaft Hangers
C8815
10 minutes
5 seconds
850812
Wadsworth have matched the ingenuity of their Powerracks
with a universal shaft hanger. It's made of 12 gauge, rigid
galvanized steel and fitted with a Nylatrol bearing surface for
long life. Please call for further details on these hangers.
C8835
30 minutes
15 seconds
850814
C8866
1 hour
30 seconds
850818
C8845
4 hours
2 minutes
850816
TIMERS
Thermostats
Canarm Exhaust Fans
We have many models
of line and low voltage
on-off thermostats for
controlling exhaust, jet
or HAF fans as well as
multi-stage thermostats
for operating vent drives.
Some of the on-off
models can be also used
for heating applications.
Make
Model
Cooling Heating/
Cooling
Columbus
CKTD110
Columbus
CKTD121
Columbus
BKTD110
Honeywell
T631A
X
Honeywell
T631B
X
Johnson
A19ABC
X
Johnson
A19PRC
X
X
Max Rating
Sensors
No. of
Speeds
CHL Item
No.
3/4 or 1 1/2 hp*
integral
1
850913
3/4 or 1 1/2 hp*
integral
1
850916
3/4 or 1 1/2 hp*
remote
1
850914
3/4 hp
integral
1
850906
integral
2
850908
remote
1
850900
integral
1
850898
1 hp
X
* ¾ hp at 125 VAC or 1 ½ hp at 250/277 VAC
Size
Horse
Power
CFM @
0.1” sp
Box Sizes
Shipping
Weight (lbs.)
CHL Item No.
12"
1/3
1300
18" x 18"
43
930622
18"
1/3
3300
24" x 24"
58
930625
24"
1/3
4700
32 1/2" x 32 1/2"
150
930627
Note: Models 12" through 24" are direct drive,
30" and up are belt drives.
2-Speed Motors are also available at extra cost.
Jet Fans
Designed for use with poly duc-vent tubing, these fans are
available with or without motorized intake shutters. This style
of fan is particularly useful for "gentle" cooling stages and for
dehumidification stages as the duc-vent tubing employed with
it, prevents cool intake air from falling quickly on the crop.
Rather, it facilitates uniform distribution and blending of the
intake air stream. Our jet fans feature 4-bladed propellers
driven by quality ball-bearing capacitor-start, thermally
protected motors.
Size
Exhaust Fans
All our greenhouse exhaust fans come complete with
aluminum and/or galvanized steel shutters, wire screen
guards, galvanized or poly wall boxes and with electric motors.
Standard motors are 115/230V, single phase, single speed. 3
phase motors are available in 208, 380, 460 and 575 volts. We
can also offer 2 speed motors by special order.
Horse
Power
CFM
18"
1/3
24"
30"
CHL Item No.
Shutter Frame Size
(If so equipped)
With Shutters
Without Shutters
3280
22" x 22"
930604
930614
1/3
4060
30" x 30"
930606
930616
1/2
6710
36" x 36"
930608
930618
Note: see heating section for poly-duc vent tubing
Aluminum Frame &
Motorized Intake Shutters
Euroemme Exhaust Fans
Our Euroemme brand exhaust fans from
Italy offer the best features and quality in
the market. The high efficiency, 6 blade
stainless steel sculpted propeller
combines large diameter with low RPM
and provides efficient operation with a
minimum of electricity consumption.
Further, these fans come with clutch
drive positive action galvanized steel
shutters that close firmly when the fan is
not running.
All of our intake shutters have fully aluminum frames and
louvers. Motor paks are available in 110V and 220V. These
intake shutters are available in sizes in 3" increments from 19"
x 19" to 51" x 51" or available custom-sized beyond 51". The
outside flange is always 3" larger than the opening. Shutter
sizes above a 33" x 33" opening are supplied with dual motor
paks. Custom size shutters are available in square or
rectangular configurations.
Size
Horse
Power
CFM @
0.1” sp
Box Sizes
Shipping
Weight (lbs.)
CHL Item No.
36"
0.5
8500
37 1/2" x 37 1/2"
143
930636
50"
1
19100
56 1/4" x 56 1/4"
264
930640
50"
1.5
21900
56 1/4" x 56 1/4"
264
930642
Motor pak only, 110V CHL Item No ..............................770736
Motor pak only, 2200V CHL Item No ............................770738
THERMOSTATS/FANS
Horizontal Air Flow (HAF) Fans
Schaefer Fans
HAF fans are accepted as being superior to other methods of
internal air circulation. Increased temperature uniformity,
reduced heat loss, reduced humidity, stagnation and improved
CO2 dispersion in the plant canopy are some of the advantages
now recognized. We offer a number of HAF models from 12"
to 24" and can assist in your selection if you wish.
Schaefer fans come completely assembled with electrical cord
and hanging bracket. They have a dual voltage, totally
enclosed, variable speed motor. Variable speed controller is
optional. Fan will automatically run on high speed if not
hooked up to a variable speed controller. These fans also
come with a specially designed safety guard that allows
virtually twice the amount of air circulation as typical basket
guard fans. Shaefer fans come in three sizes, 12", 20" and 24".
Schaefer 12" fan
1/10 hp, 115/230V, 1725 rpm, 2600 cfm
Schaefer 20" fan
1/3 hp, 115/230V, 1725 rpm, 6000 cfm
Note: opposing fans are offset to create a looped airflow
pattern.
Schaefer 24" fan
1/2 hp, 115/230V, 1725 rpm, 8500 cfm
Standard Basket Fans
16" HydroGardens Econo Model
This fan comes complete with heavy duty safety guards. A
plated metal hanging bracket and an 8' are cord are optional.
1/5 hp, 115/230V, 1600 cfm
20" Jaderloon Uni-Flo Model
This fan comes with heavy duty safety guards and hanging
chain. An 8' power cord is optional.
1/15 hp, 115V, 2000 cfm
Schaeffer Model VS20
Suggested Placement of HAF Fans in Single and Multiple Greenhouses
FANS
Greenhouse Fogging &
Humidification
Dry Fog Systems
The concept of fogging/misting
and its benefits have been
around for over 50 years. While
most commonly used in the
greenhouse industry for cooling
and humidification, misting is
also used in such applications
as frost protection, air filtration,
dust abatement, odour removal,
fire and smoke control, special
effects and more. Current
installations include residential, commercial, agricultural and
industrial applications. Specific industry uses include
greenhouses, poultry and dairy barns, amusement parks,
playgrounds, restaurants and resorts to name a few. New
applications are constantly being developed. We carry the
Fogco line for these specific purposes.
growth potential. There is no better, more effective method to
control this than with a properly designed fog system. Fog
systems can also be used to introduce fertilizers into the
environment by injecting nutrients directly into the atmosphere.
The leaves of the plant absorb the moisture and nutrients.
In their simplest form, fogging/misting systems incorporate a
high pressure pump and a spray nozzle designed to produce
water droplets smaller than the diameter of a human hair, even
as small as 5 microns. The scientific principal of fogging
known as thermal dynamics ensures those blistering
temperatures can be transformed into comfortable
temperatures. When fogging systems are used within an
enclosed environment such as a greenhouse, potato storage
sheds, wine storage facilities, etc., high levels of humidity can
be achieved without excessive moisture ever reaching the crop
or the ground.
HydroGardens Ltd. stocks a full range of high pressure pumps,
mist lines, fittings and nozzles to suit your needs. Our
knowledgeable staff can design or help you design a system to
meet your requirements.
We can supply systems with high pressure nylon tubing (which
makes installation a snap), copper tubing or stainless steel
tubing custom welded to your specifications.
Our systems are designed so that they can be "do it yourself
projects" or custom installed. Either way, you get high quality
misting at an affordable pricing.
Fogco Systems are fast becoming standard equipment for all
greenhouse applications. As an environmental control system,
they can have a dramatic effect on greenhouse productivity.
Greenhouse productivity is
dependent on many factors.
Although a fog system
cannot control or affect all
variables, it can have a
positive impact by regulating
the temperature, humidity
and moisture content within
the greenhouse.
Fog systems are ideal for
addressing and correcting
the problems associated with
high temperatures and/or
low humidity levels. These
systems have been used for
decades in greenhouse humidification and can be used year
round. This will promote increased health and productivity
within the greenhouse by eliminating "plant water stress", one
of the most significant factors in the growth of all plants. The
system can accomplish all this by eliminating "plant water
stress".
Plants lose most of their moisture through evaporation from the
leaves. They also gather most of the carbon needed for growth
in the form of carbon dioxide through the leaves. By
controlling the plants' pores through effective climate control,
the results are stronger and healthier plants with optimum
FOGCO SYSTEM BENEFITS:
• Ensures proper humidity levels
• Reduces demand for moisture
• Maintains favorable conditions year round
• Creates in-house propagation stock
• Reduces need for shading/whitewashing
• Reduces irrigation/water consumption
• Improves overall greenhouse productivity
GREENHOUSE FOGGING
Wet Fog/Mist Systems
Naturally ventilated greenhouses
can be evaporatively cooled
using mist or fog, generated by
pumping water at moderate
pressure through a series of
special "jets" or nozzles. These
nozzles are mounted on small
diameter (typically ½") PVC pipe
using proprietary pipe saddles.
In this way, nozzle placement is
independent of pipe installation,
hence maximizing flexibility and
ease of installation.
The
moderate pressure required by
these types of nozzles keeps initial cost low and eliminates
much of the routine maintenance associated with high
pressure systems.
We must quote for full mist systems including filtration, booster
pump and control, but you could design your own. We carry
both Flora-Mist and Monarch misting nozzles and saddles.
Note that the "Flora-Mist" nozzle works very well for
propagation purposes where a very fine droplet is important.
The two nozzles available in Flora-Mist are both rated at 20.5
lph at 40 psi. The Monarch nozzle produces too fine a mist for
most propagation requirements with the exception of certain
cuttings, very tiny and slow germinating seeds. In fact the M1/2 and M-1 nozzles are as close as can be achieved to high
pressure dry fog nozzles using low pressure supply. The
Monarch nozzles are available in a range of sizes from ½ to 3
gph at 100psi.
Note: We recommend fine mesh in-line filters be used with
these types of nozzles for best performance.
monitoring in affordable, easy-to-use desktop units.
Integrating a keypad for easy programmability and a built-in
microphone, these units provide you with a dependable
monitoring system with exactly the features you need to keep
track of vital environmental conditions. These units operate on
either touch-tone or pulse dialing systems.
With new enhanced design the new Sensaphone FARMSitter is
the latest in remote alarm notification, flexibility of
programming and recordable voice alarms.
The new
FARMSitter is a powerful monitoring system at an affordable
price. It can monitor equipment and environmental conditions
using 8 universal inputs, built-in power failure detection and
sound level monitoring. Contained in a weather tight
enclosure, the FARMSitter ensures that you'll get an alarm
message no matter where you are through user-recordable
voice telephone call, numeric pager and alphanumeric pager.
Sensaphone 1104
The Sensaphone 1104 automatically contacts you by phone at
up to four different phone numbers, to alert you of unsafe
conditions.
• 4 user-selectable inputs temperature or dry-contact
• Microphone monitors high sound alarms and enables
remote listen-in
• AC power failure sensing with variable recognition time
• Battery condition monitor
• Clock
Sensaphone 1108
The Sensaphone 1108 automatically contacts you by phone at
up to eight different phone numbers, to alert you of unsafe
conditions.
Security & Monitoring Systems
Sensaphone Desktop Monitoring Systems
The Sensaphone auto-dial security system offers an easy,
inexpensive way to help prevent expensive losses. It is
unparalleled protection at a very reasonable price and without
the high cost of monthly monitoring fees.
Whether monitoring temperature, humidity levels, intrusion,
water seepage, power of HVAC system failure, these affordable
units keep watch around the clock, calling you with reports in
voice-synthesized English in the event of a problem. You can
also call in to the units any time for a status report.
• 8 user-selectable inputs, temperature or dry-contact
• Microphone monitors high sound alarms and enables
remote listen-in
• AC power failure sensing with variable recognition time
• Battery condition monitor
• Clock
The 1104 provides 4 alarm inputs and 4 phone numbers, while
the 1108 model provides 8 alarm inputs and 8 phone numbers.
Both models offer flexible programming and competent
SECURITY & MONITORING
Sensaphone FARMSitter
CO2 Generators
The FARMSitter automatically contacts you by phone at up to
eight different phone numbers to alert you of unsafe
conditions.
• 8 zones configurable as
temperature, 4-20 mA or dry contact
Treated Area (m 2)
Make
Model
BTU Range
Johnson
1332
20 to 60K
610
515
940007
Green Air
CD-36
26K
265
225
940004
Glass
Poly
CHL Item No.
• calibration for each zone
• each zone can be individually
enabled or disabled
CO2 Concentration Monitors
• power outage detection
The Telaire 7001 is a easy-to-use handheld CO2/temperature monitor. This unit
provides stable, highly accurate readings
due to Telaire's patented dual beam NDIR
technology. Equipped with 0 - 4 V output,
this unit is perfect for long-term
monitoring/recording. Other features are:
LCD display, independent CO2 and
temperature readings, calculates and
displays ventilation rates, uses 4 "AA"
batteries or 6V DC from adapter included.
• high sound-level monitor (with
optional external microphone)
• 1 relay output (manual or
automatic control)
• 14 visible status indicators
• dial out to 8 telephone numbers
• user-recordable voice message
• alarm dialout via voice, numeric pager and alphanumeric
pager (wireless text message)
• microphone for on-site listen-in
• time-stamped alarm history
CO2 Controllers
• optional web page status
• superior surge/lightning protection on all inputs, telephone
line and power supply
• 12-hour rechargeable battery backup
• NEMA 4 enclosure
• 3 year warranty
Optional Accessories for Sensaphone Monitoring Systems
Description
CHL Item No.
remote temperature sensor #FGD-0100
940905
thermal alarm (with high and low temperature thresholds)
940909
water level switch (for flooding or low level) #2A553-3
940913
magnetic reed switch (for intrusion or tampering) #FGD-0006
940911
18/2 LVT direct burial cable for connecting accessory sensors (500 ft. per roll)
891500
CO2 GENERATORS
There are fundamentally 2 types of
CO2 generators or burners - those
with integral fan and those without.
The former, as might be expected,
are more costly. They are, however,
available in higher capacities than
the latter style. Both types burn
either NG or LPG. Units will be
supplied as NG unless LPG is
specified at time of order. Control of
CO2 generators can be by timer,
computer or by CO2 concentration
meter.
CHL Item No ..................................................................940595
The Ventostat 8002 is an easy to use
wall mounted CO2 controller. It is
economically priced and easy to
install. Its self-calibrating system
eliminates the need for manual
calibration. It measures 0 to 10,000
ppm and has power requirements of
18-30 VAC RMS. The manufacturer
guarantees the calibration stability
by warranting the unit for 5 years to
be calibration free. This display
model is provided with a locking
cover for hidden or visible display.
CHL Item No ..................................................................940598
CO2 Multiplexer
This is a generic multiplexer suitable for use with any and all
CO2 monitors. Easily expanded if additional zones are added
in the future.
4-Zone Model CHL Item No ..........................................940704
8-Zone Model CHL Item No ..........................................940706
12-Zone Model CHL Item No ........................................940708
CO2 MONITORING/GENERATOR
Each Fixture or Luminaire Consists of...
P.L.
Lights
Systems
produces state of the art
greenhouse light fixtures for
better quality, higher yield
and long-term dependability.
We are pleased to be a
distributor of this fine
product. The grower's first
choice for supplemental
greenhouse lighting is P.L.
Light Systems. Renowned
the world over, P.L. Light
Systems fixtures are made
with
the
best
light
components
available.
These innovative, Dutch-engineered lights are streamlined for
minimum light blockage, strong and durable for long-term
wear, and yet lightweight for ease of installation and cleaning.
They are available in HPS (high pressure sodium) and MH
(metal halide) lamp types.
Every P.L. Light Systems design is unique. For each project,
P.L. Light Systems focuses on the specific needs of the
individual customer. Utilizing information provided to us by our
customers, P.L. Light Systems will develop the most effective
and economical design based on how they can achieve the
highest light intensity and uniformity using the fewest possible
number of fixtures.
• A complete extruded aluminum
enclosure housing a ballast
kit, which includes a ballast,
ignitor and a capacitor. The
interlocking aluminum pieces
are secured together by two
punched aluminum plates.
The endplate has an opening
for the power supply cable to
be inserted and secured. The
front plate has the lamp
mogul socket attached to it
along with the specially
designed reflector-mounting collar.
• One of seven styles of reflectors, including the new
1000 Watt Maxima, made of high quality, polished and
anodized aluminum, secured to the mounting collar
using its own unique adapter and locked into place.
HPS is the most energy efficient lamp for greenhouse lighting.
About 30% of the electric energy input is converted into PAR
(the waveband between 400 -700 nm), compared to 6.7% for
incandescent lamps. Only 14% of the light energy is in the
waveband between 400 and 565 nm, and most of the rest in
the region up to 700 nm, providing maximum plant growth. The
rest is converted into heat energy.
The useful life of HPS lamps is twice that for Metal Halide (MH).
The light output during the lamp life will drop less than 10%.
HPS lamps' result in excellent plant growth and development,
provided the plants receive enough additional natural light.
HPS lamps are suitable for virtually all plant materials including
vegetables, cut flowers, potted plants and bedding plants.
P.L. Light Systems HPS fixtures are unique.
• P.L. Light Systems HPS fixtures are available
in 150W, 250W, 400W, 400W Super, 600W,
750W, and the 1000W model with two new
specially designed 1000W reflectors
• Available in 120, 208, 240, 277, 347, and 480
volts. Please specify.
• Improved collar design for easy assembly
and maintenance of all reflectors
• Ventilated aluminum body allows for
maximum cooling and increases
dependability of internal components
• Compact body reduces the blockage of
incoming natural sunlight
P.L. Lighting Accessories
P.L. Lighting Replacement Parts
Description
CHL Item No.
Description
CHL Item No.
steel track
940160
250W bulb
760611
steel coupling for track
940166
400W bulb, HPS
760610
steel "C" bracket
(2 required per fixture)
940174
430W Son AGRO bulb, HPS
760614
6' cord and plug set, 120V
940182
400W Sont (Super)
Enquire
6' cord and plug set, 240V
940180
600W bulb, HPS
940136
1000W bulb. HPS
Enquire
Igniter
760606
Capacitor
760608
Conversion reflector
760616
Note: Please specify full
fixture model, wattage
and voltage when
ordering replacement
parts.
• C.S.A. and U.L. approved
• Optional convertible ballast - toggle switch
provides the option of using either HPS or Metal Halide
lamps in 400W/1000W
GREENHOUSE LIGHTING
Hanna Instruments Canada
Retail Hydroponic Meters
pH Meters
HI 98103CP - Checkpak
The pH Checkpak includes the
Checker 1 pH tester that provides
growers with fast and accurate pH
readings ranging from from 0.00 to
14.00 pH with a resolution of 0.01
pH. This tester features a large
easy to read LCD and simple to
perform 2-point calibration with a
replaceable pH electrode. It works
for 3000 hours before you have to
change the batteries. It includes
the pH tester, solutions, calibration
screwdriver and instruction manual.
Replacement probe ......................................................HI 1270
HI 991401N - pH
Gro'chek
The popular Gro'Chek pH monitor
has been updated with a larger,
easy to read LCD. Water-resistant
casing guarantees operation after
accidental exposure to water or
high humidity in the greenhouse.
The electrode is interchangeable
and the connector is well
protected behind a waterproof
sheath. The stainless steel probe
prevents potential grounding problems ensuring extended
electrode life. Measurements are highly accurate and can be
verified with one or two point calibration. Comes complete with
a 12 VDC power supply. This meter is supplied complete with
the HI 1286 pH electrode, HI 1283 stainless steel grounding
pin, 12 VDC adapter, pH solutions, calibration screwdriver and
instruction manual.
Conductivity Meters
HI 98106 - Champ
HI 98301/98304 - DiST 1 and DiST 4
The Champ gives pH readings from 0.0 to 14.0 pH
with a resolution of 0.1 pH. This tester features a
large easy to read LCD and simple to perform
single point calibration with a replaceable pH
electrode. It has a battery life of over one year
even if used everyday for up to one hour. It has a
pull-out cloth junction to prolong life of meter. The
protective cap can be used as a measurement
vessel. This tester is supplied with cap, batteries
and instruction manual.
The casing of the popular DiST testers has been redesigned for
increased strength, better ergonomical design and a much
larger LCD for easier viewing. The probe is user replaceable.
The automatic temperature sensor is exposed and provides
faster response time ensuring all readings are corrected to
compensate for the effect of temperature. If calibration is
necessary, simply submerge the electrode tip into calibration
solution and adjust the easily accessible trimmer on the side of
the tester. The DiST 1 has a resolution of 1 ppm and the DiST
4 of 0.01 mS/cm. Both meters are supplied complete with
protective cap, 4 x 1.5V batteries and instruction manual.
Replacement probe ....................................................HI 73106
HI 98127/98128 - pHep 4 and pHep 5
The pHep 4 and pHep 5 include features such as
a dual-level LCD, battery level indicator,
replaceable pH electrode cartridge, temperature
in °C or °F, stability indicator, automatic shut-off
and automatic calibration all in a floating, water
resistant casing. The replaceable electrode has a
pull-out cloth junction. The pH measurement
ranges from 0.0 to 14.0 with single decimal
resolution in the pHep 4 and dual decimal
resolution in the pHep 5.
Temperature
measurement ranges from 0.0 to 60.0°C or 32.0 to
140.0°F. The batteries give approximately 350
hours of continuous use. They are supplied
complete with protective cap, electrode removal
tool, batteries and instruction manual.
Replacement probe for DiST 1 ....................................HI 73301
Replacement probe for DiST 4 ....................................HI 73304
HI 983310 - Aqua Dip
Aqua Dip is a versatile and accurate meter, designed with a
rugged body for field measurements. TDS or temperature
readings can be displayed simply by pressing one button, and
the HOLD function allows the ability to freeze the value on the
LCD. It has low maintenance with no calibration and a two-year
warranty. It has a long stem for mixing and an automatic shutoff after five minutes. It has a resolution of 1 ppm in TDS
measurement and 0.1°C in temperature. Comes with two 1.5V
AAA batteries and instruction manual.
HI 98311/98312 - DiST 5 and DiST 6
These meters offer ease of use to measure EC, TDS and
temperature. They have water resistant floatable casings, large
dual-level LCD, adjustable TDS ratio, temperature in °C and °F,
adjustable (ß), automatic shut-off and automatic calibration.
The DiST 5 has a resolution of 1 µS/cm in EC and 1 ppm in TDS
measurement. The DiST 6 has a resolution of 0.01 mS/cm in
HANNA INSTRUMENTS
EC and 0.01 ppt in TDS measurement. Both have
temperature measurements to 0.1°C of 0.1°F.
Both meters are supplied complete with
protective cap, 4 x 1.5V batteries and instruction
manual.
complete with HI 1286 pH electrode, HI 1283 grounding bar,
calibration solutions, screwdriver for calibration, 12 VDC
adapter and instruction manual. The HI 981404N comes with
the HI 7634 TDS probe and the HI 981405N with the HI 7632
EC probe.
Replacement probe ................................HI 73311
pH Replacement probe..................................................HI 1286
HI 983302N - EC/TDS Gro'Chek
EC Replacement probe ................................................HI 7632
The popular Gro'Chek
EC/TDS monitor has
been upgraded with a larger, easy
to read LCD plus a waterproof
casing guaranteeing operation after
accidental water exposure or high
humidity. The probe compensates
for
the
temperature
variation
automatically, is easy to clean and
very stable needing little maintenance.
It comes with a 12 VDC power supply
also. Resolution for EC is 10mg/L. The meter comes complete
with HI 7634 TDS probe, 12 VDC adapter, 1500 ppm calibration
solution, calibration screwdriver and instruction manual.
TDS Replacement probe ..............................................HI 7634
HI 9811-0 - Portable pH/EC/TDS Combo
EC Replacement probe ................................................HI 7632
HI9811 is a portable meter for field
measurement of pH, conductivity and
TDS. It measures pH from 0 to 14 with
0.1 resolution, conductivity from 0 to
6.00 mS/cm and TDS from 0 to 3.00
g/L both in hundredths of units. This
unit has automatic temperature
compensation, a battery error preventative system, a water
resistant body, the 4-in-1 replaceable HI 1285 probe. It is
supplied complete with HI 1285 probe with 1 m cable, pH 7
buffer solution, 5000 µS/cm and 1382 ppm calibration solution,
9V battery and instruction manual.
TDS Replacement probe ..............................................HI 7634
Combo Meters
Agricultural Meters
HI 98129/98130 - Combo Pen
These combo waterproof testers are designed for
high accuracy pH, EC/TDS and temperature
measurements. All pH and EC/TDS readings are
automatically temperature compensated for. The
EC/TDS conversion factor is user selectable as well
as the temperature compensation coefficient (ß). The
Combo is floating, has a large easy to read LCD, an
automatic shut-off, replaceable pH electrode
cartridge with a cloth renewable junction. The HI
98129 has a resolution of 1 µS/cm in EC
measurement and 1 ppm and the HI 98130 a
resolution of 0.01 mS/cm and 0.01 ppt. Both have pH and
temperature resolution of 0.01 and 0.1°C respectively. They
are both supplied complete with 4 x 1.5V batteries, cartridge
replacement tool and instruction manual.
pH Meters
HI 98127/98128 - pHep 4 and pHep 5
The pHep 4 and pHep 5 include features such as a
dual-level LCD, battery level indicator, replaceable
pH electrode cartridge, temperature in °C or °F,
stability indicator, automatic shut-off and automatic
calibration all in a floating, water resistant casing.
The replaceable electrode has a pull-out cloth
junction. The pH measurement ranges from 0.0 to
14.0 with single decimal resolution in the pHep 4 and
dual decimal resolution in the pHep 5.
Temperature
measurement ranges from 0.0 to 60.0°C or 32.0 to 140.0°F.
The batteries give approximately 350 hours of continuous use.
They are supplied complete with protective cap, electrode
removal tool, batteries and instruction manual.
Replacement probe .................................................... HI 73127
HI 981404N/981405N - Gro'Chek Combo
HI 991401 - pH Gro'chek
These combo meters are ideal where
pH and TDS or EC levels need to be
continuously monitored for optimal
plant growth.
Again, they have an
easy to read set of dual LCDs with a
replaceable pH probe. The unique
design of the electrode guarantees
greater clogging resistance in fertilizer solutions. They are
compact and easy to install. The HI 981404N reads pH and
TDS and the HI 981405N reads pH and EC. Both units come
The Gro'Chek pH monitor has been
updated with a large backlit dual-level
LCD. Waterproof casing guarantees
operation after exposure to water or
high humidity in the greenhouse.
Measurements are highly accurate and
can be verified with automatic
calibration with 2 sets of memorized
HANNA INSTRUMENTS
buffers. The pH electrode is specially designed to address the
needs of growers. Temperature reading has a resolution of
0.1°C. Comes complete with a 12 VDC power supply. This
meter is supplied complete with the HI 1293D pH
electrode/DIN connector, HI 1294 temperature probe, 12 VDC
adapter, pH solutions, calibration screwdriver and instruction
manual.
pH/DIN Replacement probe........................................HI 1293D
HI 98120/98121 (pH/ORP/T°) Testers
ORP/T°
and
combo
These two new models allow fast and highly accurate
measurements of ORP/temperature and pH/ORP/temperature.
They include features such as a dual-level LCD, battery level
indicator, replaceable pH electrode cartridge, temperature in
°C or °F, BEPS(battery error prevention system) stability
indicator, automatic shut-off and automatic calibration all in a
floating, water resistant casing. Both models have resolution of
1 mV in ORP measurement and 0.1°C or 0.1°F in temperature.
The HI 98121 also offers pH with resolution of 0.01. The
electrode is provided with a renewable fiber junction and is
user-friendly replaceable. They come complete with batteries,
electrode tool and instruction manual.
HI 99121 - pH Direct Soil Meter Kit
This is a precision kit for measuring of
pH of soil directly with special
electrode or after preparation of a
diluted sample. For higher degrees of
accuracy, or for stony ground where
the electrode may be damaged, use
the specialty made HI 7051 test
solution that in included in the kit. The
3-in-1 pH electrode has been designed for direct soil
measurement and has a conic, rugged tip. It incorporates a
temperature sensor right near the tip to enable it to measure
and compensate for the temperature quickly. The dual- level
LCD show the pH value from -2 to 16 in hundredths of units
while displaying the temperature on the secondary level at the
same time. The user is helped with clear prompts during
operation and calibration. The kit includes the portable,
waterproof pH meter HI 991001 complete with HI 1292D
electrode, pH 4 and 7 calibration sachets, beaker, ground
auger, HI 7051M soil preparation solution, 3 x 1.5V AA batteries
and a practical, rugged carrying case.
pH/DIN Replacement probe........................................HI 1292D
Conductivity Meters
HI 98311/98312 - DiST 5 and DiST 6
These meters offer ease of use to measure EC, TDS
and temperature. They have water resistant floatable
casings, large dual-level LCD, adjustable TDS ratio,
temperature in °C and °F, adjustable (ß), automatic
shut-off and automatic calibration. The DiST 5 has a
resolution of 1 µS/cm in EC and 1 ppm in TDS
measurement. The DiST 6 has a resolution of 0.01
mS/cm in EC and 0.01 ppt in TDS measurement. Both
have temperature measurements to 0.1°C of 0.1°F. Both
meters are supplied complete with protective cap, 4 x 1.5V
batteries and instruction manual.
HI 993301/993302 - EC/TDS/T° Monitor
These new monitors have a large, duallevel, back-lit LCD to give you
instantaneous readings of both EC/TDS
and temperature even from a distance.
The waterproof EC/TDS indicators HI
993301 and HI 993302 have been
designed to meet the Grower's need for
equipment suited to the aggressive
environments found in agricultural and
hydroponics applications. At startup, HI
993301 and HI 993302 perform a self-check to assure proper
working condition. These powerful instruments also feature a
stability indicator and hold feature to prompt the user when to
take the reading and freeze the display for easy and accurate
recording. Calibration and temperature compensation is
automatic, while the EC/TDS conversion factor and
temperature coefficient factor (ß) are user adjustable for
application specific measurements. The HI 993302 has a
higher degree of resolution than the HI 993301. Both come
complete with HI 7630 EC/TDS probe, 12 VDC adapter,
appropriate calibration solution and instruction manual.
HI 993310 - Dual-Purpose Conductivity Meter
for Direct Measurement in Soil and Liquids
HI 993310 is an instrument that has
been specifically designed to
address the question of correct and
rapid measurement of conductivity in
soil and liquids. It is supplied
complete with two probes, HI 76305
with a stainless steel, conic tip for
direct soil measurement, and HI 76304 for fertilizer enriched
solutions. HI 993310 measures both the soil conductivity in EC
(mS/cm) as well as salt activity in grams per liter. The different
scales can be selected through two keys on the front mask and
two separate LED lights indicate which parameter is being
tested. In addition, HI 993310 is equipped with an alarm LED
that automatically comes on if the soil is too dry, or nutritive
substances such as potassium or nitrogen are lacking. In the
former case, demineralized water is to be added to the soil
prior to proceeding with further tests. Direct soil measurement
is facilitated by the small diameter, stainless steel, pointed HI
76305 probe. Once inserted into the ground, the user just
needs to wait until the meter displays the value supplied by the
auger-like probe. HI 993310 is supplied complete with HI
76304 and HI 76305 interchangeable soil probes, calibration
screwdriver, 9V battery and instruction manual in a hard
carrying case.
Direct Soil Replacement probe....................................HI 76305
Liquid Replacement probe ..........................................HI 76304
HANNA INSTRUMENTS
Combo Meters
HI 98129/98130 - Combo Pen
These combo waterproof testers are designed for high
accuracy pH, EC/TDS and temperature measurements.
All pH and EC/TDS readings are automatically
temperature compensated for. The EC/TDS conversion
factor is user selectable as well as the temperature
compensation coefficient (ß). The Combo is floating,
has a large easy to read LCD, an automatic shut-off,
replaceable pH electrode cartridge with a cloth
renewable junction. The HI 98129 has a resolution of 1
µS/cm in EC measurement and 1 ppm and the HI98130
a resolution of 0.01 mS/cm and 0.01 ppt. Both have pH and
temperature resolution of 0.01 and 0.1°C respectively. They
are both supplied complete with 4 x 1.5V batteries, cartridge
replacement tool and instruction manual.
Replacement probe .................................................... HI 73127
HI 9813 - Hand-held Combo Meter
HI 9813 allows you to measure
pH, EC (conductivity) and TDS.
The meter has a pH measurement
range that covers the full
spectrum. The EC range has
been extended to 4.00 mS/cm to
overcome the limitation of 1.99
mS/cm or 1,990 µS/cm. In the TDS range, this instrument uses
the common (also known as 4-4-2) conversion factor approx.
0.65 ppm = 1 µS/cm for fertilizer readings to ensure your
measurements fully conform to industry standards. HI 9813
measures TDS in the 0 to 1999 ppm range. The specially
engineered 4-in-1 HI 1285 probe is interchangeable and the pH
electrode utilizes a fiber junction and gel electrolyte that are
particularly suitable when used in fertilizer solutions. This
probe has also been designed with Hanna's Fast Response
Probe (FRP) technology to allow quicker reaction time to
changing conditions. This meter comes complete with HI 1285
probe with 1 m cable, pH 7 buffer , 1.41 EC and 1500 ppm
calibration solutions, 9V battery and instruction manual.
HI 991404/991405 - pH/EC/TDS/T° Gro'Chek
Combo Meter
The new Combo HI 991404 & HI 991405
series meters are designed for
continuous, high accuracy pH, EC/TDS
and temperature measurements. These
monitors feature a large, dual-level,
back-lit LCD to give you instantaneous
readings of pH, EC or TDS and
temperature even from a distance. At
startup these indicators perform a selfcheck to assure proper working
condition. HI 991404 & HI 991405 also have a stability indicator
and hold feature to prompt the user when to take the reading
and freezes the display for easy and accurate recording.
Calibration and temperature compensation is automatic, while
the EC/TDS conversion factor and temperature coefficient (ß)
are user adjustable for application-specific measurements.
These instruments are supplied with an advanced, nonclogging double junction pH electrode and a rugged
conductivity probe that will withstand even the most aggressive
environments. The instruments are powered by a 12VDC
transformer and are easy to install and use making them ideal
for all continuous monitoring applications. These meters are
supplied complete with HI 1293D pH electrode, HI 7630
EC/TDS/temperature probe fixed, 12 VDC adapter, pH 4 and
pH 7 and EC appropriate calibration solutions and instruction
manual.
pH Replacement probe ..............................................HI 1293D
HI 991300/991301 - 4-in-1: pH/EC/TDS/T°
Waterproof Meter
The HI 991300 and HI 991301 offer you
the combination of pH, electroconductivity, total dissolved solids and
temperature measurements. To increase
precision, you can select the meter that
will work best with your range of
conductivity, from purified to brackish
waters. There are only 2 buttons, yet you
can select from a range of calibration
buffers and even the temperature scale
(°C or °F) most familiar to you. The
housing is waterproof and rated for IP 67 conditions. The multifunctional probe includes pH, EC/TDS and temperature in one
convenient, rugged handle. Other user selectable features
include different TDS factors from 0.45 to 1.00, and a range of
temperature coefficients (â) from 0.0 to 2.4% for greater
consistency and reproducibility. Also selectable are
standardized buffer recognition values. To ensure against
interference from transient electrical noise, a solid-state
amplifier is integrated into the probe. Both of these meters are
supplied complete with HI 1288 pH/EC/TDS/0C probe,
batteries, instruction manual and a hard carrying case.
Other Meters
HI 97500 - Lux Meter
The New HI 97500 portable Lux Meter
has been designed for simplicity of use
in taking rapid light measurements. The
HI 97500 is provided with a light sensor
connected by a flexible coaxial cable
that allows remote, stable and optimum
position measurement of light, without
any interference of the operator. The
meter makes it possible to choose
among three measurement ranges by simply pressing the
RANGE key. The HI 97500 Lux Meter is housed in a rugged
waterproof case for trouble-free outdoor measurements. It also
has a low battery indicator. Resolution is 0.001, 0.01 and 0.1
Klux in the three different ranges. This meter comes complete
with batteries and instruction manual.
HANNA INSTRUMENTS
HI8564 - Portable Thermo-Hygrometer with
Detachable Probe
HI 8564 thermo-hygrometer provides
readings with 98% precision in a very
short time for both relative humidity and
temperature. The detachable relative
humidity probe is housed in a rugged
ABS cylinder with a thin-film polymer
humidity sensor and a signal amplifier
along with a built-in temperature sensor.
A perforated cap on the probe allows the
air to circulate while it protects the
sensitive sensor. The standard cable is
2m long (7'), and a 5 meter (16.5') version
is also available. Specially designed for internal applications
such as museums, libraries, computer rooms and printing
facilities. The smooth membrane keyboard has 4 keys that
make operation simple and quick. A large LCD displays
readings in easy-to-read digits each with a symbol next to it to
identify the operating mode. The HI 8564 is supplied complete
with HI 70601/2 relative humidity probe with 2 m cable, 9V
battery and instruction manual.
RH Replacement probe with 2 m cable ..................HI 70601/2
RH Replacement probe with 5 m cable ..................HI 70601/5
C 215 - Grow Master - Nitrogen, Phosphorus,
Potassium and Ammonia Meter
C 215 is a practical instrument made
for the hydroponics and greenhouse
industries to measure nutrients
commonly present in fertilizer
enriched solutions. This convenient
photometer measures ammonia,
phosphorus, nitrate and potassium
in three distinct ranges of low,
medium and high concentrations.
This way accuracy is maximized for
each nutrient and for every
concentration. The low cost per test and simplicity of the
operations, gives the grower immediate access to the results
(no sending samples away). Armed with C 215, you can test
the presence and strength of nutrients right on the spot. This
can translate itself into a substantial saving and improved yield
over a period of time. The internal microprocessor provides
high accuracy and simplifies operations to the degree that
even non-technical operators can use the meter. In fact, the
meter is supplied complete with all the necessary accessories.
Just source the reagents needed from the table provided and
commence measurements. C 215 has been engineered to run
on batteries as well as the mains and comes complete with 2 x
9 volt batteries and a 12 VDC adapter. It also comes with a
measurement kit comprising a rugged carrying case, 100 ml
and 170 ml beakers, 60 ml and 5 ml syringes, 25 filters, 100 ml
cylinder, demineralizer bottle, pipette, active carbon for 100
tests and instruction manual.
HI145 - Portable Thermometer
The HI 145 soil thermometer
was designed to measure soil
temperature quickly and
accurately up to depths of 12
inches. Equipped with a
calibration check feature, the
user can be assured that
each reading is accurate.
The T-shaped design and
large LCD make it easy to use. The HI 145-00 and HI 145-01
come with a 5" long AISI 316 stainless steel probe that has a
conic shape. The HI 145-20 and HI 145-30 are supplied with
a 12" long stainless steel probe for ideal use in monitoring hot
liquids. The HI 145-00 and 145-20 utilize the Celsius scale
while the HI 145-01 and 145-30 measure in Fahrenheit. Auto
shut-off helps to extend the battery life. They all come
complete with 1.5V AAA battery and instruction manual.
Calibration & Buffer Solutions
Code
Description
Size
pH Solutions
pH 7 calibration buffer, coloured ............................500 ml
pH 7 calibration buffer, coloured ............................1 L
pH 4 calibration buffer, coloured ............................500 ml
HI PHKIT ............pH calibration starter kit ........................................3 x 20 ml (pH 7) +
3 x 20 ml (pH 4)
HI 7061L ............Cleaning solution for pH testers/meters ................460 ml
HI 7061M ..........Cleaning solution for pH testers/meters..................230 ml
HI 70300L ..........Storage solution for pH testers/meters ..................460 ml
HI 70300M..........Storage solution for pH testers/meters ..................230 ml
HI MTNKIT
Maintenance kit (cleaning & storage)
1 x 230 ml (cleaning)
+1 x 230 ml
(storage)
TDS Solutions
HI 7032L ............1382 ppm calibration solution, 0.5 conv. factor ....460 ml
HI 7032M ..........1382 ppm calibration solution, 0.5 conv. factor......230 ml
HI 70032P ..........1382 ppm calibration solution, 0.5 conv. factor ....25 x 20 ml
HI 70442L ..........1500 ppm calibration solution, 0.65 conv. Factor ..460 ml
HI 70442M ........1500 ppm calibration solution, 0.65 conv. factor ..230 ml
HI 70442P ..........1500 ppm calibration solution, 0.65 conv. factor ..25 x 20 ml
HI TDSKIT ..........1382 ppm calibration starter kit ............................5 x 20 ml
EC Solutions
EC2.76 calibration solution ....................................500 ml
EC2.76 calibration solution ....................................1 L
HI 7030L ............12880 µS/cm calibration solution ........................460 ml
HI 7030M ..........12880 µS/cm calibration solution ........................230 ml
HI 70030P ..........12880 µS/cm calibration solution ........................25 x 20 ml
HI 7031L ............1413 µS/cm calibration solution ..........................460 ml
HI 7031M ..........1413 µS/cm calibration solution ..........................230 ml
HI 70031P ..........1413µS/cm calibration solution ............................25 x 20 ml
HI ECHKIT ..........12880 µS/cm calibration starter kit ......................5 x 20 ml
HI ECLKIT ..........1413 µS/cm calibration starter kit ........................5 x 20 ml
HANNA INSTRUMENTS
Pump Set
List of the F-1 features common to all eight
models:
• 16 digital inputs for temporary break, conditional stop,
irrigation count, differential pressures and fertilizer, acid,
mixing and external tank level controls
• 6 analog inputs for pH sensors, EC sensors and solar
radiation sensors
• 2 non-consent alarm relays
• 7 digital outputs for filter back flushing, pH and fertilizer tanks
• inputs 24 VAC output power supply and 110/220 VAC with
grounding (internal power)
With the advent of large scale soilless crop production in the
1980's, Holland developed and popularized fully assembled
unitized (frame or skid mounted) irrigation systems that
incorporated the following functions:
• receipt and media filtration of mains water (well, pond,
cistern, municipal, etc.)
• atmospheric dosing and mixing of filtered water with acid
and fertilizer stocks for pH and EC adjustment respectively
• pumping and fine filtration of the resulting "working solution"
to a distribution and drip irrigation network in the
greenhouse.
Typically an electrical hook-up, inclusive of line volt switchgear,
as well as a controls panel, were incorporated in the system so
that, once set in place in the header house servicing a
complex, it remained only to pipe a single line and run a single
electrical feed to the unit before it was service ready. In
common terms, truly a "plug'n-go" system.
Hanna F-1 Controller
While the control of a "pump set" as described above
commonly fell into the realm of the associated greenhouse's
environmental control system, there remained a need for
stand-along control, as many growers preferred mutual
exclusivity between climate control and irrigation/fertilization
control .
In response to this need,
Hanna Instruments of Italy
developed a purpose-built
line of pump set controllers
called the F-1. Available in
eight models (see list), the F1 offers complete integrated
control of a pump set system
as well as zone watering
control for up to thirty-two
valve stations, depending on
the model.
• PID Control reduces overdosing and large oscillations in the
mixing process
• logging of executed programs with values of all parameters
and the Information Center - splash-proof polyester
membrane cover consisting of:
• 4-level LCD used for programming and data presentation
• 32 Light Emitting Diodes (LED's) for each sector valve
• 9 LED's for each of the fertilizer tanks, pH control, mixer
and filters
• 2 extra-large LED's for the alarm and pump functions
You should select the model suitable for your complex
depending on the number of watering zones you will be
operating and whether or not you want the waterproof wall
mount or the panel mount controller. The HI8001 is the panel
mount model while the HI8002 is the waterproof wall mount
unit. It includes all the features of the HI8001 plus a waterproof,
NEMA 4X enclosure.
No. of Zones
Panel Mount
Wall Mount/Water-Proof
8
HI8001-01
HI8002-01
16
HI8001-02
HI8002-02
24
HI8001-03
HI8002-03
32
HI8001-04
HI8002-04
The following models are available:
Whether you have an existing "pump set" with rudimentary or
automated controls or wish to explore the benefits of having a
pump set built from scratch, we would be happy to answer any
questions you may have and quote you for a suitable F-1
controller or for a full pump set system. Please speak with one
of our sales representatives.
HANNA INSTRUMENTS
Advantage pH Control Monitor
EC and pH Control Monitors for Recirculating
Irrigation Systems
(NFT, Substrate Systems and Ebb & Flood
Benches)
Advantage EC Control Monitor
Solution pH is controlled by precise measurement of the pH in
the irrigation water. As water leaves the system by uptake and
evaporation, new water which replaces it affects the solution
pH, normally causing it to rise. In addition, the chemistry of
nutritional uptake by the plants pushes the pH up. When pH
is elevated to the high set point the controller automatically
activates a feed pump. Acid is then added to the system until
the desired pH level is achieved. If for any reason the pH level
in the system falls to the low set point, an alarm will be
activated and/or the system shut down. As an additional
precaution, a lock-out safety timer protects against feed pump
overrun.
Model # MP-2
Specifications:
• Range of pH is 2 - 12
• Sealed silver/silver chloride combination pH probe
Solution salinity (EC) is controlled by precise measurement of
electrical conductivity in the irrigation water. As water leaves
the system by uptake and evaporation, new water which
replaces it causes the EC to fall. When EC is reduced to the
low set point, the controller automatically activates a feed
pump. Fertilizer or chemical is then added to the system until
the desired EC level is achieved. If for any reason the EC level
in the system rises to the high set point, an alarm will be
activated and/or the system shut down. As an additional
precaution, a lock-out safety timer protects against feed pump
overrun.
• 100 psi rating
• 60°C maximum water temperature
Optional Features
Many options are available by special order for both the EC
and pH models. For example, modulated control, flow
sensors, and chart recorders.
Model # MCM
Specifications:
• 0-5000 umho/cm range
• ATC (auto temperature compensated) electrode
• 100 psi rating
• 60°C maximum water temperature
PH, EC CONTROLLERS
As stated by ZENON, a Canadian success story:
"ZENON is a global leader in the development and
manufacturing of membrane technologies and systems for
water treatment, wastewater treatment and water reuse. With
installations worldwide, ZENON is providing cost-effective and
reliable solutions to challenges faced by municipalities,
industry and government agencies."
Z-MODTM is their patented completely pre-assembled, modular,
membrane-based water filtration system, specifically designed
for applications of widely ranging flow rate. With Z-MODTM,
ZENON delivers their world-leading ZeeWeed® ultrafiltration
technology in a compact, easy to operate and cost-effective
platform.
Nutrient Management
Very soon, the greenhouse industry will think in broader terms
when it comes to nutrient management. Conventionally, it
refers to the on-going assessment of, and reaction to, changes
in the composition of fertilized irrigation water in order to
maximize plant nutrition. With the advent of existing and
proposed legislation governing fertilizer run-off and ground
water contamination, the term nutrient management now
connotes something much bigger. For the greenhouse grower,
his responsibilities respecting his crop(s) remain, but vast new
responsibilities respecting the environment are added.
Empirical results from prototype testing conducted in
Leamington, Canada, scrutinized by the Harrow Research
Station, have prompted ZENON officials to proceed with
commercialization and we at HydroGardens look forward to
your inquiries, enabling us to prepare a quotation tailored to
your greenhouse complex.
The operative issue is "leachate" and what the grower must do
to contain it and manage it. Most by now are aware of the
impending requirements as well as the various alternatives for
"treating" leachate on site so as to render it suitable for
blending with virgin nutrient in order to send the resulting
solution back to a crop for re-use. The express goal is the
elimination of "drain-to-waste" feeding by using close loop,
recirculating fertigation. The challenge to reaching the stated
objective is in the treatment of the leachate in order to kill
and/or remove pathogenic organisms.
At present the following are accepted methods:
• Heat pasteurization
• Ultrafiltration
• UV irradiation
• Ozonation
• or some combination of one or more of the above.
While we at Hydro Gardens, have always carried UV
equipment (see Trojan water sterilizers), we are now joining
forces with ZENON Environmental of Oakville, to market
modular, unitized ultrafiltration systems specifically designed
for leachate treatment in commercial greenhouses. System
sizes range from small manual units suitable for 20,000-40,000
ft² greenhouses up to elaborate frame mounted pre-assembled
automatic models capable of leachate treatment in sprawling
multi-acre greenhouse complexes.
ZENON WATER
IWAKI Mag Drive Pumps
We also use Iwaki pumps in our installations and have them
available for sale. They feature a wide range of models and
sizes for every requirement possible. They are durable, have
high efficiency and are applicable for even high density acids.
Please inquire with your salesman or our office for more
information.
Bellow Metering Pumps By Gorman-Rupp
Industries (GRI)
Bellows metering pumps operate on
a positive displacement principle.
Pumps are designed to
displace both corrosive and
noncorrosive fluids including
fertilizer concentrates, acids,
alkalies. Accurate to ± 0.5%
from stroke to stroke, when
pump is set 50% to 100% of
full stroke. Variable flow is
available through stroke
length adjustment. Discharge
pressure is maintained over the
entire flow range of the pump.
Poppet valves are utilized to prevent
backflow; and springs are available to provide a positive
shutoff, preventing siphoning through the pump in applications
where a positive suction head exists. They are available with
single, double, triple and quadruple tandem liquid ends. They
are extremely reliable lasting for many years and easy
replacement of wetted parts. We keep a good supply of
replacement wear parts and have staff on hand to do repairs if
necessary.
Raytek MiniTemp Portable Infrared Thermometer
Raytek MiniTemp is a pocket-sized
portable infrared thermometer that is
easy to use. Just point, shoot and
read the temperature on the large
backlit display. It is a fast, easy, noncontact, safe way to measure
surface temperature. It can measure
temperature ranges of -18 to 260°C
(-3° to 500°F). The optical resolution
is 6 to 1 at the focal point. The
further away from the target, the
larger the size of the area measured.
CHL Item No ..................................................................850890
GRI Mag Drive Pumps
We now have available an
economical mag drive pump
built by GRI. Operation is similar
to standard centrifugal pumps,
except the impeller is driven
with a magnetic coupling,
eliminating the need for a shaft
seal. Magnetic drive pumps
should be used only in flooded
suction conditions.
The 18650 Series has a range of 10.2 gpm with a maximum
head of 20.7 feet. Maximum system pressure is 25psi. The
motor is 115V, 60 Hz and is drip proof, shaded pole and
thermally protected. The fluid temperature has a maximum of
82°C. The body housing is polypropylene with the impeller and
bearing made of VectraR (chemically resistant to most acids,
oxidants and bleaches, and organic solvents). The pump shaft
and thrust bearings are ceramic and the o-rings are EPT or
Viton making for a very good product at a great price. It is also
available in 230V. Other sizes and models are available. Please
make inquiries to your salesman for more information.
BELLOWS METERING & MAG DRIVE
PUMPS, INFRARED THERMOMETERS
Scales
We have discontinued mechanical and analog scales in favour of digital, load cell scales. Because the market offers literally
thousands of choices in such scales, we have selected a number of representative models to offer as standard product.
Giro Small Measure Scales
Pelouze Econo Bench Scale
• Models available are PG300,
PG500, SK2000H and SK3000,
which measure up to 300 g., 500
g., 2 kg. and 3 kg.
respectively.
• Model 4010CN measures up to 60 kg (150 lb.).
• The PG300 and PG500 are
accurate to ±0.1 g. and the
SK2000H and SK3000 are
accurate to ±1.0 g.
• Battery operated with energy saving
auto shut-off
• Accurate to ±0.1 kg.(0.2 lb.).
• Tare function.
• Detachable LCD display on
9 ft. cord.
• 12" x 12 ½" painted
checkerplate steel platform.
• AC adapter included.
• 1 year limited warranty.
• 6V AC adapter is available (not included)
• Tare function
• Large size plastic bowl included.
• Small units have a cover for the platform.
Acculab Small Measure Scales
Acculab Bench Scales
• Models available are VIC- 4KG
and VIC-6KG, which measure
up to 4 kg. and 6 kg. respectively.
• Models available are SVI-20
and SVI-50, which measure up
to 20 kg. and 50 kg.
respectively.
• Weighing modes: g., oz., lbs.,
dwt., ozt., grains, Newton
and carats.
• The VIC-4KG is accurate to ± 1 g.
and the VIC-6KG is accurate to ± 2g.
• Tare function.
• Large LCD amber backlit display.
• Stainless steel pan.
• Lock-down capability.
• AC adapter included or can be operated on one 9V battery.
• 2 year warranty.
• Weighing modes: g., kg., lbs.,
ozt.
• SVI-20 is accurate to ±2 g.
and the SVI-50 is accurate
to ±5 g.
• Tare function
• Detachable LCD display.
• Can be wall mounted or table mounted.
• Auto-off.
• Overload and underload indicator.
• Stainless steel platform.
• AC operated (Adapter Included) or one 9V battery.
• 2 year warranty.
SCALES
• Water temperature range: 32°F to 140°F
• Flow ranges: ½ gpm to as high as 3000 gpm
• Feed ratio: adjustable over a 10 to 1 range
• Standard liquid end construction: PVC, hypalon, viton
• Ceramic or stainless steel check ball is available
Anderson Injectors
Anderson Ratio-Feeder Injectors make
accurate
chemigation as easy as turning a dial. Inject single or multiple
chemicals at the same time.
Features:
• Positive displacement for accuracy
• Volume proportioning - accuracy is not affected by
varying flow rates or pressures
• Water operated - fail safe: no flow, no treatment
• Efficient - does not restrict water flow or lose pressure
• Diaphragm mechanism - no sliding seals to leak. Wide
chemical compatibility, easy priming
• Single or multiple heads - can feed multiple chemicals
without premixing. These could include chlorine, bromine,
acid, fungicides, herbicides, insecticides, etc.
J-Plus Series
The J Plus is the best selling of the Anderson injectors. Its
simple design and user friendly programming make this
injector very easy to use and operate. Micro-processor
controlled, the J Plus is very accurate at all flow rates ranging
from 1 gpm up to 160 gpm, depending on the model. It also
allows you to inject multiple chemicals/fertilizers at the same
time, all at different rates. We can design systems to suit your
exact needs.
Anderson Ratio: Guard pH and EC Monitors
A Ratio:Guard monitor
is the ideal complement
to your injector system.
Monitoring of pH levels
and EC (fertilizer) levels
is easily accomplished.
All models provide a
continuous watch over
your injection system
and have built in audible
and
visual
alarm
indicator.
A sealed
membrane keypad and
large LCD readout make for easy programming.
Easy
installation is provided with the inclusion of the quick-tee that
enables quick in-line installation. Long cables on the probes
give you continual indication of pH or EC depending on unit.
These units are not restricted to use only with Anderson
injectors, but may be used with any brand of injector to monitor
pH and EC.
Available in pH only (P-1) and EC only (E-1).
Model P-1 CHL Item No ................................................850521
Model E-1 CHL Item No................................................850520
Service & Parts
We are an authorized Anderson service center and stock a
comprehensive range of factory parts for most models of
Anderson injectors and monitors. Our professional service
personnel are trained to repair your Anderson to factory
specifications fast and efficiently. If you prefer to do you own
repairs, call us for any parts you may need and they will be
dispatched promptly.
Specifications:
• Power requirements: 120 VAC standard, 240 VAC, 24 VAC
and 12 VDC available on special order
• Operating pressure range: 15 psi to 125 psi
ANDERSON INJECTORS
A30-2.5% Injector
• Flow rate: 0.15 - 30 gpm
or 0.57 - 114 lpm
The Advantage line of Dosmatic hydraulically driven injectors
represents the most complete range of sizes and models ever
offered to the horticultural industry. Advantage injectors are
highly reliable, easy to use and allow ratio adjustment while in
use. Quick mount brackets and elbows permit a quick and
easy installation. Advantage model injectors are accurate at
very low flow to very high flow, insuring that the right amount of
chemical reaches your plants every time. Advantage's unique
quick change seals make sure field service and maintenance is
easily and simply accomplished when required. Advantage's
wide range of models means you have just the right size
injector for every job. No chemical waste means greater profit
for every user. Advantage's ability to inject a wide range of
chemicals, including acids and disinfectants, provides the best
value available in any injector specifically made for the
horticultural industry.
Advantage injectors are not limited to the horticultural market,
but are also widely used in the animal industry for injecting
medication and disinfectants, etc. Please contact us for
specifications on units for animal health.
Dosmatic Advantage injectors are available as stand alone
units, mobile units, set up in parallel or in tandem to best suit
your needs. Some of the common models are featured below.
• Injection rate: 0.2% - 2.5% or
1:500 - 1:40
• Operating pressure: 5.0 - 100
psi or 0.34 - 6.9 bar
• Inlet/Outlet: 3/4" inch hose/1"
npt
A40-2.5% Injector
• Flow rate: 0.50 - 40 gpm or
1.89 - 151 lpm
• Injection rate: 0.2% - 2.5% or
1:500 - 1:40
• Operating pressure: 5.0 - 100
psi or 0.34 - 6.9 bar
• Inlet/Outlet: 1 1/2” npt
A12 - 2.5% Injector
• Flow rate: 0.03 - 12 gpm or 0.11 45 lpm
Mobile Unit
• Injection rate: 0.5% - 2.5% or 1:200 1:40
• Available in all
A15/A20/A30/A40 models
• Operating pressure: 6.0 - 100 psi or
0.41 - 6.9 bar
• Inlet/Outlet: 3/4 in npt/bsp
Service and Parts
We are a Dosmatic authorized repair outlet and as such are
authorized to carry out any and all warranty repair work as well
as routine maintenance and repairs. Our repair personnel
have been factory trained at Dosmatic USA and are therefore
highly qualified to repair or assist you in trouble shooting any
problems you may have. We also stock common repair parts
if you are prepared to do the work yourself.
DOSMATIC INJECTORS
Hozon Siphon Mixer
Solution Heating
For small economical requirements,
the brass "Hozon" Siphon Mixer can be
used to apply chemical and fertilizer
solutions. Simply attach it to the end of a faucet and connect
a hose to the male end of the "Hozon". Mix the chemical or
fertilizer concentrate in a bucket and drop the siphon tube into
the concentrate. Turn on the faucet and "Hozon" automatically
mixes approximately 1 part of concentrate to 16 parts of water.
Always mix the concentrate 16 times stronger than the
recommended use rate and "Hozon" will do the rest.
There are commonly three ways to accomplish water and/or
solution heating. If "in-line" heating is required, shell and tube
or plate and frame exchanges are appropriate. For "in-tank"
heating, a stainless steel helical coil is best suited for the job.
CHL Item No....................................................................750800
Float Valves
For “in-line” applications, we carry a line of stainless steel heat
exchangers manufactured by Secepol. These units are highly
efficient, durable and yet economically priced. Our plate and
frame heat exchangers are manufactured by Nixon-Vicarb and
while offering slightly higher heat transfer coefficients than the
Secepol units, are more expensive and are not stainless steel.
If system expansion is probable, however, these plate and
frame units are convenient because they are modular and can
be easily upsized with the addition of extra "plates".
15"
891300
1" x 1"
27 1/4"
891302
1 1/2" x 1 1/4"
30 3/4"
891304
For "in-tank" heating, we offer pre-fab stainless steel coils sized
according to the load. We supply stainless steel compression
unions for connecting the coils to your heating system, as well
as cartridge style hot water circulators for feeding them. A
temperature controller with capillary bulbs (in the absence of a
climate computer) provides the on-off signal to the circulating
pump.
32 1/2"
891306
Contact us with your heat load requirements and we can
provide you with a quotation.
1 1/4" x 1 1/4"
36"
891308
1 1/2" x 1 1/2"
39"
891310
Inlet x Outlet
Overall Length
CHL Item No.
All PVC construction
1/2" x 1/2"
Bronze Body, Polypropylene Float
3/4" x 3/4"
Solution Aerators
Designed for system catchment tanks, aerators are available in ¾"
through 2" pipe size and help to oxygenate circulation solution.
Size
Gro-Tube (for NFT Systems)
Our NFT channel is made from a black/white co-extruded
polyethylene offering strength and almost no lateral distortion.
We produce it in 2 formats in response to grower's varying
preferences. Other sizes can be custom ordered.
Size
Length
CHL Item No.
Length
CHL Item No.
24” Sheet
1000’
960112
3/4” MNPT
5”
970200
28” Sheet
1000’
960113
1” MNPT
7”
970202
12” Centre-Folded
1000’
960122
1 1/4” MNPT
10”
970203
1 1/2” MNPT
10”
970204
2” MNPT
14”
970206
Catchment Tanks
Molded polyethylene tanks are available in
3 basic configurations:
• vertical, cylindrical open head style with flat walls and full
size removeable lids
• vertical, cylindrical tight head style with relief walls and 20"
diameter removeable manhole covers
• horizontal, cylindrical style with relief walls and 20" diameter
removeable manhole covers
Capacities range from 1,000 up to 10,000
litres. Options include colour, calibration
(i.e. litres, US gallons or imperial gallons),
and integral female NPT bulkhead fittings
(1" up to 2"). Speak to us about ordering
details and delivery times.
Gro-Tube Drain Fitting
This poly drain fitting provides a secure seal with
the NFT channel to carry water out of the channel
in the manner of a sink drain. Comes complete
with neo washer. Volume price breaks at 50, 100
and 200 quantity levels. Available in 2 sizes.
¾" CHL Item No ..............................................................960107
1 ½" CHL Item No ..........................................................960108
Ace Clipper and Clips
The Clipper 702 is an all-purpose stapling plier of rugged and
dependable construction. Matching chisel point undulated
staples designed for the 702 make it perfect for closing up NFT
channel or for fastening flexible poly films in general.
Ace Clipper 702 CHL Item No ........................................980100
Ace Staples (5000/box) CHL Item No ............................980102
FERTIGATION ACCESSORIES
& TANKS
Trojan Ultraviolet Water Sterilizers
Trojan UVMax incorporates the most advanced ultraviolet technology, ensuring that you get a robust, cost-effective and efficient
solution to your disinfection needs. Using ultraviolet (UV) light, the Trojan UVMax renders microorganisms unable to reproduce.
They have high-output lamps that reduce space requirements for the UV system. It has an elapsed time meter to signal when to
replace the lamp ensuring continuous disinfecting and an audible and visual alarm that indicates in real time that the UV light
intensity is adequate to provide the full lethal exposure required. It does not change the taste, odour or pH of water like other
systems do. There are six sizes of units to choose from depending on
the gallonage needed to be disinfected (UVMax A, B, C, D, E and F).
Model
UVMAX A
UVMAX B
UVMAX C
UVMAX D Plus
UVMAX E
UVMAX F
Flow rate
0-3 gpm
2-5 gpm
5-14 gpm
5-14 gpm
8-28 gpm
13-47 gpm
Inlet/Outlet 3/8" FNPT
3/4" NPT
3/4" NPT
3/4" NPT
1" NPT
1" NPT
Note: Many replacement parts are available including
connector kits, starters, ballasts, circuit boards, detector
boards, transformers, lamp holders, "O" rings, etc. Listed
here are some of the common ones.
Description
Trojan No.
CHL Item No.
lamp replacement for UV705
650139
760705
650138
760706
lamp replacement for UV712/776
650137
760715
650142
760704
650141
760714
quartz sleeve replacement for UV612
650145
760713
lamp replacement for UV Max B
602726
760717
lamp replacement for UV Max C/D
602727
760718
lamp replacement for UV Max E
602728
760719
ballast replacement kit for ADV 12
650391
760721
TROJAN WATER STERILIZERS
K-50, 6 mil Greenhouse Film
Features:
• clear chemical resistant UV HALS system
• contains "anti-dust" additive that repels dust and dirt
• strong EVA co-polymer resin for excellent durability
K-50 IR/AC, 6 mil Greenhouse Film
Klerk's patented Koolite 380 and K50 IR/AC with the superior
anti-condensate properties Klerk's is known for, are recognized
throughout North America as the best films available to
increase a grower's bottom line profits by altering and
enhancing the growing conditions inside the greenhouse.
Klerk's K50 Clear is specially formulated using a tough tri-layer
construction, EVA copolymers, and special anti-dust additives
to product an outstanding protective outside layer which is the
perfect complement to Klerk's specialty films. K50 White,
formulated in a 55% and 70% opacity, provides the perfect
growing environment for those plants typically grown in
indirect light conditions.
50-Month Prorated Warranty: Klerk's 50 month
warranty insures that you are protected 100% against UV
degradation (prorated over 50 months - four winters).
Grower Testimonial
Features:
• a 6 mil film with superior anti-condensate properties
• a 6 mil film with infrared properties reducing heat by 30% to
heat the same space when compared with clear or straight
anti-condensate films
• gives a more diffused light which causes less stress on the
plant
KoolLite 380, 6 mil Greenhouse Film
Features:
• a greenhouse film that selectively uses reflective pigments to
alter the light spectrum to benefit plant growth
• reduces heating, watering and shade requirements
• has superior anti-condensate and diffusion properties as in
the IR/AC
• reduces fungus sporulation (does not kill fungus) by slowing
the reproductive process through the light spectrum
alteration
Every Canadian grower knows that light levels in fall and winter
are far less than ideal. For vegetable producers, it is
particularly the case. It is important to maximize available light
reaching the plants. Beads of condensation that form on
greenhouse poly block a significant amount of light. They also
increase disease pressure when they fall onto the crop. To
address this problem, the Ingratta's tried Klerk's K50 IR/AC 6
mil film.
"We are extremely pleased with its performance. It is the best
anti-condensate film we've see. An unexpected benefit has
been the IR (infrared) feature. It is noticeably warmer in the IR
houses." Nick and Margaret Ingratta, Igino Ingratta & Son,
Leamington, Canada
The combination of warmer temps and increased light made
the Klerk K-50 IR/AC film a contributing factor in their ability to
improve their production since first installing three years ago.
Growers owe it to themselves to try this product.
without AC
with AC
2-in-1 Option
Klerk's offers a two-in-one option for customers wishing anticondensate film on the inside and regular K50 film on the
outside. Klerk's will put both types on one roll so when you
install it, you just unroll it as if it were a regular tube. This is a
distinct advantage over buying tubes as it cuts down on the
cost of purchasing two layers of anti-condensate film when you
GREENHOUSE FILM
Designed for the northern latitudes where ice sheeting can be
a problem, or anywhere extra film strength is needed. The
“Hyti” films are 7.2 mil in thickness and, like the “K” films, are
rated at 50 month longevity.
Hyticlear:
is rated clear with anti-dust additive.
Hytilux:
has the patented Klerks AC (anticondensate) technology and anti-dust
additive.
really only need the inside layer to be IR/AC.
It is available as follows:
Hytithermic: has a thermal IR (infrared) additive that
K50 Clear-K50 IR/AC 6 mil 50 months
widths available are 20', 21', 24', 25'
K50 Clear-KL 380
retards heat loss at night.
Poly Film Accessories
6 mil 50 months
widths available are 20, 21', 24', 25'
Poly Patch Polyethylene Repair Tape
Standard Roll Sizes
Poly-Patch, a rugged patching
tape, is a complete first aid kit
for greenhouses. Poly Patch
comes on convenient rolls so
that mending is fast and easy.
Poly-Patch can be used for
preventive maintenance in
areas of extra stress or as a
perfect cure for cuts or tears in
your greenhouse.
Simply
apply a strip of Poly-Patch
directly to a clean dry surface.
K-50 CLEAR SHEETS
Width
10 12 14 16 20 24 25 28 32 36 40 42 48 50
100 X
X
X
X
X
110
150
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
K-50 IR/AC SHEETS
Width
100
10 12 14 16 20 24 25 28 32 36 40 42 48 50
X
X
X
110
150
X
X
X
X
X
X
X
X
X
X
X
X
X
Note: All rolls can be custom cut to length (within 5 ft.
increments) or can be ordered as standard length rolls at any
time of the year. The former requires approximately two weeks
additional lead time and may be subject to an additional
special freight charge depending on volume ordered. Please
contact us regarding custom lengths as this can amount to a
significant saving over purchasing standard length rolls for
non-standard greenhouses. Also note that any rolls under 20 ft.
in width must be ordered in pairs. Rush orders can be
accomodated with a surcharge of 10% and special freight
charges.
Hyticlear, Hytilux,
Hytithermic Greenhouse Film
CHL Item No.
Size
The unique properties of
Poly-Patch create a bonding
930100
2” x 48”
so aggressive that it will last
930102
4” x 48”
for up to three years. The
highly UV stabilized 6 mil
930104
6” x 48”
polyethylene film mated to a
UV stabilized adhesive out
performed many other materials tested for durability and
adhesiveness. Choose from the above sizes.
Aluminum Polylock
The industry standard, this comes pre-drilled on 2 ft. centres
complete with hardware in single or double profiles.
CHL Item No ..................................................................930150
Wirelock
An economical alternative to Polylock. This can also be used
for fastening insect screening or shade material as well as
greenhouse poly.
CHL Item No ..................................................................930156
Note: When ordering polylock or wirelock, please specify the
type of material to which it is being mounted. eg. wood, steel
gutter, square steel tubing, etc.
GREENHOUSE FILM &
ACCESSORIES
White Nursery Film/Reflective Ground Sheeting
White Woven Ground cover
White reflective 4mil ground sheeting (70% opacity), originally
developed as an overwintering for cold frames to protect
nursery stock from winter kill, has become popular as reflective
ground cover inside the greenhouse. In this application, it:
• Increases light levels
• Helps eliminate weeds
• Helps reduce greenhouse humidity
• Available in many of the standard poly widths and 100 ft. in
length.
This cover has the same benefits as the black ground but also
increases light levels in greenhouses. It is not recommended
for outdoor use. This product is available by special order.
Prices of white nursery film/reflective ground sheeting are
subject to volume discounts. Custom sizes are available with
sufficient volume if ordered far enough in advance of required
date. Please ask for details.
CHL Item No ..................................................................980120
Black/White Ground Sheeting
We have available a black/white 5.5 mil ground cover in
standard rolls of 10' x 100'. This poly is black on one side and
keeps down weeds etc. and is white on the other side to help
reflect light into the greenhouse. Standard rolls are kept in
stock. Custom widths and lengths are available by special
order subject to minimum volume ordering.
Gintec Shade Technologies
Ground Cover Staples
These are 6" staples used to hold ground cover down. They
are made of heavy metal with spiked ends for easier
application and come in boxes of 1000 staples.
Shade Cloth
Gintec provides shade cloth in two
different types of materials:
premium knitted or woven. The
woven polypropylene shade
cloth has been the industry
standard for over fifty years.
It is woven in 30%, 47%,
55%, 63%, 73% and 80%
shade factors. Standard mill
widths are 6', 10' and 12'.
Other widths may be obtained
by cutting and/or sewing
combinations together using
Gintec's fabricating techniques.
Reinforcing tape and grommets are needed on the outside
edges for installation on cable structures. A pocket seam can
also be sewn to slide a pipe into for mounting.
The premium knitted shade has a unique three-way lock stitch
construction and is available in shade factors of 30%, 40%,
50%, 60% and 70% in black. Standard mill-roll widths are 6',
10' and 12' but again other widths may be obtained by
fabrication for sizing and mounting.
Gintec Shade Technologies custom fabricates ground cover,
premium knitted and woven shade cloth as well as thermal,
insect and wind screens.
Black Woven
Ground Cover
The fabric is made of
black high UV resistant
polypropylene which is
woven to allow both air
and water to pass through
reducing standing water
and root rot. The 12"
marker lines help with
container alignment. This fabric can be used under gravel,
soil, sand or pine straw to prevent soil erosion and weed
growth or in greenhouses to hinder weed growth. It is available
in stocked sizes of 6', 10', 12' and 15' wide by 300' long.
Custom sizes are also available and can be stitched to any size
required. Just call for a quote.
Frost Blanket
Frost blankets can be put directly over plants or shrubs for frost
or freeze protection. They are manufactured from non-woven
polypropylene. Several weights are available. The heavier the
weight, the more heat the blanket will trap.
Six ounce frost blanket is most popular in Canada and will
protect a crop to a temperature of -10°C to -14°C. Standard
widths are 12' and 15' and standard roll length is 300'. Custom
sizes are again available by fabrication. Four ounce blankets
are also available and are good to about 0°C. Both blankets
are available by custom order.
GROUND COVER
Roll-Air Greenhouses
Your Plants Inside or Outside in 60 Seconds
There are many unique advantages of the Rovero Roll-Air system.
Features: • No hinged elements - therefore no shadows
or wind or rain traps.
• Each bay has individually controllable openclose mechanism
• No obstructing parts, reliable and low
maintenance
• You may choose from a variety of coverings
The Roll-Air allows for many advantages: better cultivation of
bedding-plants and young plants, winter protection from frost
for susceptible plants (like in tree nurseries), the hardening of
outdoor crops (cuttings, etc.) and great use in garden centers.
Remember your plants can be inside or outside in just
seconds.
Roll-Air greenhouses can be supplied with a built-in shade
system that offers even more possibilities through the
combination of the greenhouse openings and the shade
system.
The Roll-Air is available in four styles: Multi-Rovero Roll-Air
Gothic, Multi-Rovero Roll-Air, Rovero Mini Roll-Air and Rovero
Tunnel Roll-Air. The Gothic gives an improved and more
efficient rolling system; great for garden centres and growing
areas. The Multi Rovero is the standard Roll-Air type known all
over the world. The Mini Roll-Air is the simpler version of the
Roll-Air with the same great advantages as the Gothic Roll-Air,
but lower and can be operated manually or automatically. The
Rovero Tunnel Roll-Air is easy to build and is designed to have
a manually operated roof; great for example, for covering
container fields. Call for a brochure today!
ROVERO SYSTEMS
OUR NEW CATALOGUE IS
FINALLY HERE!
Thank You...
Energy and Black-Out Curtains
Canadian HydroGardens Ltd. has
teamed with Westland Greenhouse
Construction of St. Catharines, Ontario
and Alweco bv. of Netherlands in the
marketing and sales of greenhouse
curtain systems for all manner of
commercial greenhouse structures.
Used
primarily
for
energy
conservation, greenhouse curtains
play a vital role in plant shading
activities during periods of high light or excessive heat, as well
as a special purpose role in photoperiod management for
crops requiring black-out treatment. In certain instances,
growers will install two curtain systems in one greenhouse - as
for example where a crop is both shade and black-out
sensitive.
• Its creation involved a great deal of work and
could not have been accomplished without the
continued strong support of our many
dedicated suppliers. I thank them for their
assistance.
• Its creation also involved all of our staff at some
point or another. I wish to thank all of them for
their help and cooperation.
To our customers, I hope you will find this
catalogue helpful in sourcing your growing
requirements. Our next step to be more
accessible to you is in the completion of our
website. We will do our utmost to earn and
maintain your patronage.
Thank you for choosing Canadian HydroGardens Ltd.
Elaine Sharp
Inside Sales and Promotion
Alweco Systems incorporate a
unique and patented "Ultra-Delay"
slip block mechanism, which allows
the individual curtain panels to selfadjust with each full opening or full
closing. Similarly, the "Ultra-Delay"
slip feature prevents damage to the
drive mechanism in the event a
panel encounters an impediment to
its normal free travel during closing.
With respect to the curtain material, a host of choices are
available from 10% to 80% shading and 99.9% black-out.
Shading fabrics that double as energy curtains thereby accord
the extra benefit of heat
conservation at night
time and during the
heating season. We use
only the finest materials
from the world's leading
manufacturers - Ludvig
Svesson (L/S) and Bonar
Phorium (B/P).
Let us prepare a quotation for you. One of our sales
representatives would be pleased to discuss your plans and
measure your greenhouse(s) for quoting purposes.
Our Sales Staff...
Randy Hartog..............Grower Sales
Al Pender ....................Grower Sales
Lionel Costa................Leamington Grower Sales
Nick Wilson ................Retail Hydroponic Sales
Louise Stewart ............Inside Sales
Elaine Sharp ..............Inside Sales
1386 Sandhill Drive, Ancaster, ON L9G 4V5
Tel: (905) 648-1801 • Fax: (905) 648-1870
Order desk: 1-800-893-4769
Email: [email protected]
1-800-8WeGrow
ENERGY CURTAINS

Click Here to product catalog

Transcription

Similar documents

The Penn Township Campus Landscaping Beautification Project

texas concealed handgun license - Capitol Area Practical Shooting

The National Greenhouse Manufacturers Association Spotlight

from univ

COMBINE - FarmTek

CRYOGEN-FREE Models

Lindene Patton CARe final May31 2013.pptx

charleysgreenhouse.com 1-800-322-4707

The Analysis Of Dioxins And Furans Using HRGC-High