Safety products

Transcription

Safety products

III
SAFETY
PRODUCTS
1. Safety products for welding48
1.1. Welder protective wear48
1.2. Helmets, shields and welding filters53
1.3. Welding eye and face protection58
1.4. Welding gloves59
2. Working gloves60
2.1. Leather gloves60
2.2. Assembly gloves60
2.3. Latex and nitrile gloves61
3. Protective clothing62
4. Eye and face protection63
Safety products
CONTENTS
47
1. SAFETY PRODUCTS FOR WELDING
1.1. Welder protective wear
ǁǁǁ͘ƌǇǁĂů͘ĞƵ
ĂŬƚƵĂůŶĂŽĨĞƌƚĂŝƉƌŽŵŽĐũĞŶĂ
www.most.com.pl
Welding uniform type QUENCH
● Modern design – welding type
● Made of non-flammable cotton in basis weight 380 g/m² – satin
weave
● Flame resistant sewing threads
● Reflective strips on front and back side
● Elegant grey and denim colours
● Two types of blouse: Quench 311 (long –apron)
Quench 511(short-jacket)
● Two types of trousers: Quench 6 (jeans type),
Quench 611 (with additional pocket)
● Full range of sizes: from 40 up to 60, available on request
● Made in Poland
● Certified (PN-EN 11611, PN-EN 11612)
Safety products
Catalogue No. 77 07 0014xx
* different numbers for different sizes
inside pockets
reflective
stripes
special flame-resistant thread
marking with logo
type available
easy to open tabs
modern design
made of non-flammable cotton
48
certified
(PN-EN 11611, PN-EN 11612)
© Copyright RYWAL-RHC
ISO 9001
Welding uniform type UNAL 3
● Multipurpose protective uniform in welding style
● Set: trousers dungarees + jacket
● Made of non-flammable cotton in basis weight
380 g/m² – satin weave
● Flame resistant sewing threads
● Blue and grey colours
● Full range of sizes: from 40 up to 60, available on
request
● Made in Poland
● Certified (PN-EN 11611, PN-EN 11612)
marking with logo type
available
easy to open tabs
special flame-resistant thread
inside pockets
made of non-flammable cotton
certified
(PN-EN 11611, PN-EN 11612)
1. Safety products for welding
Safety products
Catalogue No. 77 07 001xxx
49
www.most.com.pl
Welding helmet
MOST TIGER VISION CAT
Catalogue No. 72 00 962030
Description page 54
Leather clothing MOST
Protective clothing set including: trousers and jacket, recommended for welding. Made of cow split leather lined
of flame-resistant material. Available in sizes: L, XL, XXL.
Catalogue No.
74 10 000510 size L
74 10 000520 size XL
74 10 000530 size XXL
Welding gloves MOST BIZON
Safety products
Description page 59
50
Welding shoes DOKER
● Safety shoes for use in welding
● Rubber sole resistant up to 300 ° C in the short-term
contact
● Special fast opening clamps
● Steel toecap protects toes from impact up to 200 J
● Leather tongue protects from spatters of hot metal
ISO 9001
Welding goggles 0036
Metallic goggles with raised outer flap. Finished with a
soft cloth. Replacable colourless and dark glasses (DIN
4-11), diameter 50mm.
Welding suit WELDMAN
non-flammable
Light-weight, covering suit for welding work consisting
of jacket and overalls. Made of fire-resistant material.
Category II.
Available in various sizes.
Catalogue No. 75 3x xxxxxx
Leather sleeve D1
Made of cow split leather. Grain leather sleeves available as well
Welding gloves
MOST HURON
Description page 59
Welder’s apron B1
Made of cow grain leather, resistant to hot welding
spatters.
Available also as cow split leather.
Knee covers
Knee pads, made of leather and felt.
Adjustable: straps fasteners.
Feet cover
Made of grain leather, good protection for feet and shin
from hot welding spatter.
Safety products
51
www.most.com.pl
Welding suit WELDMAN
non-flammable
Light-weight, covering suit for welding consisting of jacket and overalls.
Made of fire-resistant material.
Category II.
Available in various sizes.
Welding helmet
GRAND VISION MOST
Description page 53
Welding gloves
MOST TIGER
Safety products
Description page 59
52
Welding shoes DOKER
● Safety boots for use in welding
● Rubber sole resistant in the short-term contact to 300° C
● Special fast-opening clamps
● Steel toecap protects toes from impact up to 200 J
● Leather tongue protects from spatters of hot metal
ISO 9001
1.2. Helmets, shields and welding filters
Welding helmet GRAND VISION MOST
■ GRAND VISION MOST is the newest welding helmet of the MOST brand. In standard version it is equipped with the latest generation of automatic filters MOST made in ADC Plus technology. Depending
on version, it enables to perform grinding works without taking off the helmet and external adjustment of the filter parameters. In additionally they can be connected with a Clean-Air Basic 2000 system or a safety helmet. Suitable for all welding methods.
Benefits:
● equipped with automatic filter GRAND series with a 3 year warranty,
● stepless darkening from 6 to 8 DIN (filter GDS) and from 9 to 13 DIN,
● stepless adjustable sensitivity filter,
● stepless adjustable delay in filter brightening,
● very wide viewing area: 68 x 97 mm,
● the "grind" function- allows work during grinding process without removing of helmet (filter GDS),
● integrated ventilation system,
● versions with airflow Clean-Air® Basic Flow Control system,
● versions with safety helmet CONCEPT.
GRAND VISION GDS MOST
Catalogue No.
72 00 962010
72 00 962030
72 00 962111
72 00 962310
72 00 962410
72 50 090200
72 00 990906
72 00 961056
72 00 961060
72 00 961067
GRAND VISION GDS MOST,
Clean-air® Basic Flow Control
Safety products
GRAND VISION GDS MOST
helmet CONCEPT
Welding helmet GRAND VISION GDS MOST
Welding helmet GRAND VISION DS MOST
Welding helmet GRAND VISION GDS MOST, helmet CONCEPT
Welding helmet GRAND VISION GDS MOST, Clean-air® Basic Flow Control
Welding helmet GRAND VISION GDS MOST, Clean-air® Chemical 2F
External protective PC cover glass GRAND VISION
Internal protective PC cover glass 71x107 mm for GRAND VISION MOST
The outer frame to GRAND VISION MOST
Head-gear POLIT
Sweatband GZTB1 to GRAND VISION
Clean-air® Pressure + CONDITIONER
Clean-air® Chemical 2F
53
www.most.com.pl
Welding helmet TIGER VISION MOST
STANDARD
CAT
BLACK MAN
TORCH DANCER
FLASH
■ TIGER MOST VISION is a product that combines modern design with the proven technology of the
helmet and automatic welding filter. Product for client looking for not necessarily the most expensive
solution but compromise between security, performance and reliability. Easily satisfy not only by parameters but also by its reasonable price.
Equipment:
● automatic filter SQ913 with a 3 year warranty,
● stepless adjustable darking from 9 to 13 DIN,
● stepless adjustable sensitivity filter,
● versions with airflow Clean-Air ® Basic Dual Flow system,
● versions with safety helmet CONCEPT.
Available in five color options: Standard, CAT, FLASH, TORCH DANCER, BLACK MAN.
Catalogue No.
72 00 963110
72 00 963120
72 00 963130
72 00 963140
72 00 963150
72 00 9632x0
72 00 9633x0
72 50 090200
72 00 990900
72 00 961057
72 00 961060
72 00 961065
Welding helmet TIGER VISION, STANDARD
Welding helmet TIGER VISION, FLASH
Welding helmet TIGER VISION, CAT
Welding helmet TIGER VISION, BLACK MAN
Welding helmet TIGER VISION, TORCH DANCER
Welding helmet TIGER VISION, Clean-air® Basic Dual Flow
Welding helmet TIGER VISION, helmet CONCEPT
External protective PC cover glass GRAND VISION/ TIGER VISION
Internal protective PC cover glass 51x108mm
The outer frame to TIGER VISION MOST
Head-gear POLIT
Anti-allergic sweatband (pack. 5 pcs.)
TIGER VISION, Clean-air® Basic Dual Flow
Safety products
Welding helmet NEW VISION MOST
54
■ NEW VISION MOST is a reliable welding helmet with adjustable head-gear equipped with passive
filter with fixed darkening or with appropriate automatic MOST welding filter. There are
sets with Clean-AirR Basic 2000 system or safety helmet available. In addition, four colour versions are
available. Suitable for all welding methods.
Provides:
● protection from high temperature and welding sparks,
● protection from UV and infrared rays,
● optimal viewing area,
● easy for individual adjustment, optimal shape protection of face and ears.
Catalogue No.
72 00 961000 Welding helmet NEW VISION MOST black (passive filter 10 DIN)
72 00 961310 Welding helmet NEW VISION V913 MOST, black
72 00 961500 Welding helmet NEW VISION MOST black, CLEAN-AIR BASIC FC
72 00 961510 Welding helmet NEW VISION V913 MOST black, CLEAN-AIR BASIC FC
72 50 090110 External protective PC cover glass 90x110mm NEW VISION
72 00 990900 Internal protective PC cover glass 51x108mm for MOST
72 20 010032 Head-gear MOST
72 00 961060 Head-gear POLIT
72 00 961065 Anti-allergic sweatband (pack 5 pcs.)
ISO 9001
Welding helmet S777 MOST
Eagle
Fire
Alien
Blue
■ Welding MOST S777 is designed to protect eyes and face from spatter and UV / IR rays.
As standard equipped with:
● welding filter with adjustable degree of darking from DIN 9 to DIN 13,
● stepless adjustment of the sensitivity filter,
● 3-step adjustment of the delay in brightening,
● the "grind" function- allows work during grinding process without removing of helmet.
Available in 5 designs: black, blue, eagle, fire, alien.
Catalogue No.:
72 00 982000 Welding helmet S777 MOST blue
72 00 982001 Welding helmet S777 MOST black
72 00 982002 Welding helmet S777 MOST eagle
72 00 982003 Welding helmet S777 MOST fire
72 00 982004 Welding helmet S777 MOST alien
72 00 982005 External protective PC cover glass 45x105 mm for S777 MOST
72 00 982006 Internal protective PC cover glass 89x114 mm for S777 MOST
72 00 982011 Head-gear S777 MOST
72 00 982012 Sweatband S777 MOST
Black
■ The CleanAIR® BASIC powered air purifying respirator is designed specially for particle filtration [dust, non-toxic
and toxic fumes, solid and liquid aerosols, bacteria and viruses]. Compatible with whole range of CleanAIR® headpieces NEW ® VISION MOST, TIGER VISION MOST, GRAND VISION MOST, it can be used in a wide range of applications.
Without breathing resistance, it provides protection in particular for long duration applications. The CleanAIR® BASIC
powered air purifying respirator combines ergonomic design, a high level of wearer comfort and extremely low weight. All of the technology and features you need. With two operating modes ECO (160 l/min) and TURBO (210 l /min).
The ECO mode gives the user lower but still sufficient air flow and prolongs the operating time. Air flow limit can be
checked with included flow indicator. The TURBO mode is optimal for hard and long-term tasks in hot areas. With
intelligent warning system which warns the user with a visual and acoustic signal when even the smallest potential
hazard such as a drained rechargeable battery, end of filter service life, increasing resistance or a drop in the air flow
occurs. The rechargeable battery ensures operations for up to 10 hours. Intuitive control panel with well-arranged
pictograms makes the unit user-friendly. If the battery charge is too low and micro-processor can't guarantee the accurate airflow, the alert system (see flow control) is switched on. Certificates: EN 12 941 TH2P/TH3P (for Clean-air®
Basic Flow Control ) and EN 12 941 TH1P (for Clean-air® Basic Dual Flow).
Clean-air® Basic Dual Flow
Clean-air® Basic Flow Control
Catalogue No.
72 00 961180 Clean-Air ® Basic Flow Control - Set
72 00 961181 Clean-Air ® Basic Dual Flow - set
72 00 961200 Drive Unit Clean-Air ® Basic Flow Control
72 00 961201 PSL Filter for Clean-Air ® Basic
72 00 961202 Pre-Filter for Clean-Air ® Basic (10 pcs)
72 00 961212 Filter against bad odors to Clean-air ® Basic (10 pcs.)
72 00 961203 4.8 V NiMH Battery for Clean-Air ® Basic
72 00 961204 Charger for Clean-Air ® Basic
72 00 961205 Seal edge to Clean-Air ® Basic (NEW VISION / VISION TIGER)
72 00 961218 Seal edge to Clean-Air ® Basic Flexi (GRAND VISION)
72 00 961206 Air duct for Clean-Air ® Basic
72 00 961207 Corrugated hose for Clean-Air ® Basic
72 00 961217 Filter cover for Clean-Air ® Basic
72 00 961208 Belt standard for Clean-Air ® Basic
72 00 961215 Sweatband for Clean-Air ® Basic
Safety products
System powered air purifying respirator Clean-air® Basic Flow Control / Dual Flow
55
www.most.com.pl
Automatic welding filter Grand GDS MOST
● latest technology ADC Plus (Angular Dependence
Compensation)
● unitary darkening level within +/-30° of the observed optical axis
● shade adjustment / outside
● sensitivity adjustment / outside
● delay adjustment / outside
● highest optical class: 1/1/1/1 EN 379
● open state shade: 4 DIN
● close state shade: 9-13 DIN
● viewing area: 68x97 mm
● switching time (bright-dark): 0,15 ms
● clearing time (dark-bright): 100-1000 ms
● UV 16/IR 16 protection,
● work temperature range: -10°C to +60°C
● power source: solar panel
● weight: 135 g
Automatic welding filter Grand DS MOST
● latest technology ADC Plus (Angular Dependence
Compensation)
● unitary darkening level within +/-30° of the observed optical axis
● shade adjustment
● sensitivity adjustment
● delay adjustment
● highest optical class: 1/1/1/1 EN 379
● viewing area: 68x97 mm
● weight: 135 g
Automatic welding filter V 913 DS ADC MOST
Safety products
● increases welder’s work convenience,
● unitary shade level in +/-30 degrees of viewing angle,
● shade adjustment,
● delay adjustment,
● optical class: 1/1/1/2 EN 379,
● viewing area: 95x46,5mm
● clearing time (dark-bright): 200-800 ms,
● work temperature range -10°C to +60°C,
● weight: 95g
56
ISO 9001
Automatic welding filter V 913 DS MOST
● delay adjustment
● optical class: 1/1/1 EN 379
● UV 16/IR 16 protection
● weight: 95g
Automatic welding filter V 913 MOST
● optical class: 1/1/1 EN 379 + A1
● clearing time (dark-bright): 400 ms
● UV 16/IR 16 protection
● weight: 95g.
Automatic welding filter SQ 913 MOST
● optical class: 1/1/1/3 EN 379
● viewing area: 96x46,5 mm
● switching time (bright-dark): 200-800 ms
● clearing time (dark-bright): 400 ms
● weigth: 110 g
Selection of darking degree (DIN)
AMPERAGE
WELDING PROCESS
coated electrode
MIG
MIG - light metals
TIG
MAG
Darkened fields correspond with
amperages, which do not appear at the given welding method.
Depending on the working conditions, darkening of one degree higher or lower are acceptable.
plasma welding
Safety products
plasma cung
57
www.most.com.pl
Fixed shade welding filters from 4 up to 13 DIN
■ Passive welding filters MOST made of glass thickness 3,0 mm, available in:
● round-shaped, diameter 50 mm,
● rectangle-shaped: 50x100 mm, 80x100 mm, 90x110 mm.
Catalogue No.
73 00 05xxxx Welding filters MOST round-shaped ø 50 mm
73 00 50xxxx Welding filters MOST rectangle-shaped 50x100 mm
Colourless glasses MOST
■ Glasses available as:
● round-shaped, diameter 50 mm,
● rectangle-shaped: 20x100 mm, 50x100 mm, 80x100 mm, 90x110 mm.
Catalogue No. 72 50 xxxxxx
Safety products
1.3. Welding eye and face protection
Welding spectacles 529 MOST
Welding protective goggle 618
Welding protective
goggles 601
■ Welding spectacles 529 MOST - guarantee
the best possible protection against metal
spatters, UV, visible and invisible infrared rays
(IR). Construction and all used design solutions
give excellent wearability.
Recommended for: gas welding, soldering and
gas cutting:
● protection layer screech resistant with passive welding filter DIN 5,
● single-lens glasses spherical with wide viewing area,
● soft side tips regulated vertically and
horizontally.
● Welding Protective goggle in soft and heat
resistant material
● Mineral glass lenses with ø 50 mm
● Elastic fabric headband guarantees an excellent wearability
● Soft frontal allows a simple and rapid replacement of the lenses and good ventilation
● Provide protection against solid elements,
UV, visible light and infrared.
● Application: gas welding, brazing, oxy-acetylene cutting.
● Welding filter DIN 5
● Wide viewing area
● Different ventilation system (tight and indirect ventilation)
● Available also with acetate lens for welders
● Available with corrections lens
● Category at protection III (with polycarbonate lens)
manufacturer number: 618.01.06.50
manufacturer number: 601.02.77.00,
colourless acetate
Catalogue No.
77 35 601200
manufacturer number: 601.02.77.00,
colourless polycarbonate
Welding hood TIG
Welding hood type 870
■ Leather hood for TIG welding with goggles and a leather face protection 38cm. The
hood contains a passive filter lens in darkening (shade) diameter of 50 mm and DIN 10.
The glasses are opened up and anti-spatter
suitable for welding and available with additional covers.
■ Leather welding hood in brown color. Made
of impregnated and heat resistant leather,
Kevlar thread stapled. The viewing area in dimensions 51 x 108 mm available in varying degrees of shade, opened up. The flexibility of
the hood makes it adaptable to any hard to reach areas during welding.
Welding hood for TIG with leather head and
neck protection
58
ISO 9001
1.4. Welding gloves
MOST LAMA
Catalogue No.
76 10 140110
Catalogue No.
77 54 031700
■ Durable, good quality gloves made of cowhide split recommended
for simple welding operations. Hidden seams, thick cowhide split and
wrist-protecting cuff.
■ Welding gloves for TIG welding. Made of soft goatskin, provide
good grip needed in this welding method. The cuff is made of cowhide split.
MOST ALABAMA
MOST MARS
Catalogue No.
76 10 140120
Catalogue No.
77 54 031950
■ Durable, good quality gloves made of cowhide split on the top
and cowhide grain on grip side. This results in better work comfort.
Increases gloves resistance to oil, dirt and other contaminants absorption on the grip side.
■ Welding gloves made of good quality red cowhide split. Resistant
to high temperatures, trimmed with non-flammable threads. Full-palm,
total length 35 cm.
MOST BIZON
MOST PUMA
Catalogue No.
76 10 140130
■ Comfortable, high quality gloves made of black cowhide split.
Recommended also for welding operations. Resistant to high temperatures, hidden seams, cotton padded, trimmed with non-flammable
threads.
■ Welding gloves made of good quality red cowhide split. Resistant
to high temperatures, trimmed with non-flammable threads.
Full-palm, total length 35 cm.
MOST DEEP BLUE
MOST TIGER
Catalogue No.
77 54 031960
■ High quality welding gloves made of cowhide split, 2nd category,
Kevlar® trimmed. Resistant to high temperatures. Additional fingers reinforcement (thumb) and wrist on grip side, with cuff. Total length 35
cm. Cotton padded. Very comfortable.
Catalogue No.
76 10 140140
Catalogue No.
77 54 031970
Safety products
MOST HURON
■ Very durable, high quality, split cow gloves in blue colour, with a specially reinforced part of the thumb. Resistant to high temperatures,
covered seams, lined with cotton, stapled by Kevlar® nonflammable
thread.
59
www.most.com.pl
2. WORKING GLOVES
2.1. Leather gloves
Leather gloves MOST BERMUDA
Catalogue No.
77 55 015000
Leather gloves MOST BAHAMA
Catalogue No.
77 55 016000
■ Gloves made of high quality cow split leather. Full-palm, soft and
well-tanned leather secures working comfort and gloves durability.
■ Gloves made of cow split leather of high quality. Full-palm, both comfortable and durable. Strengthened cuff protects wrist. Differs from
other gloves made of cow split leather because of better appearance.
Leather gloves MOST DAKOTA
Leather gloves MOST TOGO
Catalogue No.
77 55 032009 size 9
77 55 032010 size 10
77 55 032011 size 11
■ Leather gloves, made of high quality soft cow grain leather. Full-palm
with exceptional working comfort. Very good mechanical strength. The
wrist with elastic band. Designed for work where high mechanical protection for full palm is recommended.
Catalogue No.
77 55 020000
■ Gloves made of split cow leather of high quality. Full-palm, comfortable and durable. Resistant to high temperatures. Trimmed with nonflammable Kevlar® threads, cotton padded.
2.2. Assembly gloves
Safety products
Assembly gloves MOST GRENADA
60
Catalogue No.
77 55 030008size 8
77 55 030009size 9
77 55 030010size 10
77 55 030011size 11
■ Assembler gloves made of goatskin with reinforced finger-tips and
elastic cotton top. Tightened wrist with elastic band. Perfectly fit to
hand, allowing excellent grip, even for small parts and objects.
2. Working gloves
Assembly gloves MOST GUYANA
Catalogue No.
77 55 031009size 9
77 55 031010size 10
77 55 031011size 11
■ Assembler gloves made of goatskin. Velcro fastened. Top of the glove
made of cotton. Due to the excellent grip and durability it perfectly suitable for assembly, loading, storage, packing etc
ISO 9001
2.3. Latex and nitrile gloves
Nitrile gloves Type 440A
Working gloves made of thick nitrile in blue colour. Fully coated, tricot cuff, roughened version.
Nitrile gloves Type 440Y
Gloves coated by very light yellow nitrile, with open back, tricot cuff. Available in sizes 7,8,9,10
Catalogue No.
77 59 304408 size 8
77 59 304409 size 9
77 59 304410 size 10
Nitrile gloves Type 441A
Working Gloves made of thick nitrile in blue colour. Fully coated, tricot-rubber cuff.
GREIFER gloves
Cotton gloves partly covered with latex and knitted cuffs. Best for cement works, gardening or construction works etc.
Cotton gloves covered with rubber. Available in red, green or blue. For general purpose use.
Catalogue No.
76 10 200005 green, size L
76 10 200007 red, size L
76 10 200008 blue, size L
DRAGON gloves
Gloves designed for overall use, made of cotton-polyester knitted, particularly latex-coated. Abrasion- and
wear-resistant. Provide an excellent grip.
Sizes 9 and 10.
Safety products
VAMPIRE gloves
Catalogue No.
76 10 300000size 10
76 10 300010black size 10
2. Working gloves
61
www.most.com.pl
3. PROTECTIVE CLOTHING
MOST QUENCH
hard flammable
■ QUENCH hard flammable clothing has a modern look specially designed
for welders. Recommended for use in places with risk of ignition as and with
presence of melted metal spatters. For welders and workers in related professions, and for workers exposed to the hot factors. Clothes can be used during
working in higher-risk environment but with additional protective elements
of metallic fabrics or leather.
Benefits of product:
● made of non-flammable cotton in basis weight 380 g/m² – satin weave,
● flame resistant sewing threads,
● reflective strips on front and back side,
● two types of blouse: Quench 311 (long –apron), Quench 511(short-jacket),
● two types of trousers: Quench 6 (jeans type), Quench 611 (with additional
pocket),
● full range of sizes: from 40 up to 60, available on request,
● personal marking with logo type available.
Certified according to EN 11611:2009 (Protective clothing for welders and
workers in related professions) BS EN 11612:2008 (Protective clothing against
heat and flame. Protection class II.
Catalogue No.
770700140x pants QUENCH 6
770700142x pants QUENCH 611
770700144x blouse QUENCH 511
770700146x apron QUENCH 311
*different numbers for different sizes
MOST UNAL-3
hard flammable
● Made of non-flammable cotton in basis weight 380 g/m² – satin weave
● Made of non-flammable cotton
● Set: trousers dungarees + Jacket
● Full range of sizes: from 40 up to 60, available on request
● Personal marking with logo type available
Safety products
62
■ Flame resistant uniform Unal-3 is a high-performance welding clothing, dedicated for use in places where there is a risk of ignition as a result of short-term contact with the flame and with presence of melted metal spatters. For
welders and workers in related professions and for workers exposed to hot
factors. Clothes can be used during working with higher-risk environment but
with additional protection elements of metallic fabrics or leather.
Certified according to EN 11611:2009 (Protective clothing for welders and
workers in related professions) BS EN 11612:2008 (Protective clothing against
heat and flame. Protection class II.
Catalogue No. 7707001xxx
3. Protective clothing
ISO 9001
Non-flammable clothing for welders WELDMAN
■ Protective clothing for welders and other users. Consists of: shirt and dungarees.
Made of non-flammable material. It perfectly protects against short-term exposure to
the flame, effects of convective heat, thermal radiation, spatter of melted metal and
burns up from small melted metal.
4. EYE AND FACE PROTECTION
Protective glasses MOST 516
■ Glasses MOST 516 are innovative and solid design consisting of many
interesting solutions which guarantee right protection and big comfort
of use features:
● shaped design, ensures optimum side protection
● anatomical soft rubber nose-gear
● colored sides with anti-allergic rubber
● scratch-resistant coating
Safety products
Catalogue No.
77 35 916100 MOST 516, colorless
77 35 516102 516.01.10.02, gray lens
516.01.10.02
4. Eye and face protection
63
www.most.com.pl
Protective glasses MOST 568
■ MOST 568 are lightweight, cost-effective sunglasses which provide
good protection:
● lightweight, powerful, all-polycarbonate
● weight only 23g
● various coatings and lens
Catalogue No.
77 35 968200
77 35 568202
77 35 568204
77 35 568103
568.02.09.04
MOST 568, colourless, not steaming
568.02.01.02, gray lens
568.02.09.04, orange lens
568.01.03.03, yellow lens
568.02.01.02
568.01.03.03
Welding spectacles 529 MOST
■ Welding spectacles 529 MOST - guarantee the best possible protection against metal spatters, UV, visible and invisible infrared rays (IR).
Construction and all used design solutions give excellent wearability.
Recommended for: gas welding, soldering and gas cutting:
● protection layer screech resistant with passive welding filter DIN 5,
● single-lens glasses spherical with wide viewing area,
● soft side tips regulated vertically and horizontally.
Safety products
Anti-spatter shield OT-1N, OT-1,5N
Anti-spatter shield OT-1
■ The anti-spatter mask OT-1N, OT-1,5N consist of polycarbonate anti-spatter glass and head-gear with additional front reinforcement,
Head-gear allows smooth regulation of face glass, step regulation of
head deposition depth and smooth adjustment of head circumference
fit. Protective glasses for all types are changeable elements. All shields
protect eyes and face during hand works, machine metalworking, working with wood, concrete and plastics. Shields OT-1,5N provides also
protection against arc arising from the electric short circuit
■ Light, practical shield worn on head. 1 mm PC shield provides full-face protection (available also in 1,5 mm thickness).
Catalogue No.
72 01 040030
72 01 040032
72 01 040031
72 01 040033
64
Catalogue No.
72 01 040000 OT-1
72 01 040001 additional exchangeable glass to OT-1
OT-1N
OT-1,5N
changeable glass 1 mm for OT-1N
changeable glass 1,5 mm for OT-1,5N
ISO 9001
Welding protective goggles 601
● Wide viewing area
● Different ventilation system (tight and indirect ventilation)
● Available also with acetate lens for welders
● Available with corrections lens
● Category at protection III (with polycarbonate lens)
Catalogue No.
77 35 601200
manufacturer number: 601.02.77.00, colourless polycarbonate
77 35 601201
manufacturer number: 601.02.77.00, colourless acetate
Protective goggles 602
● The basic model, ideal for a different sort applications
● Regulated elastic band in textile braid
● Polycarbonate lens
● In directed ventilation
manufacturer number: 602.01.00.00, colourless polycarbonate
Welding protective goggle 618
● Welding Protective goggle in soft and heat resistant material
● Mineral glass lenses with ø 50 mm
● Elastic fabric headband guarantees an excellent wearability
● Soft frontal allows a simple and rapid replacement of the lenses and good ventilation
● Provide protection against solid elements, UV, visible light and infrared.
● Application: gas welding, brazing, oxy-acetylene cutting.
● Welding filter DIN 5
Safety products
manufacturer number: 618.01.06.50
65

Safety products

Transcription

Similar documents

JOB DESCRIPTION: INSIDE SALES REPRESENTATIVE

• Stamp- and forming technology • Welding in accordance with DIN

Messer Eutectic South Africa (Pty) Ltd Company Profile

Construction Technology - Galena Interior Learning Academy

Digital Elite™ Series

ZIMA 126-CS-Fabrication.indd

Consistantly implemented plastics expertise: Hot-gas

File - New Hampshire Construction Career Days

FILLETS `n GROOVES - Section