contains drawings - Del Packaging, Ltd.

DEL Packaging, Ltd
Lid Pluggers | Model: CLPS-G
Cap Lidding Plugging System - Gluer
This system features a rotary lid plugging system with a
glue applicator. A servo in-feed timing screw is utilized to
transfer the container from the glue drum roller
assembly into the star-wheel and guide assembly of the
CLPS-G lidder. The glue roll drum features an external hot
oil recirculating system and hot melt glue reservoir. The
container travels through a dual-timing screw feed
system to tilt the container forward as it spins in the
pocket of the timing screw. A fine bead of glue is applied
to the inside diameter of the canister as it travels underneath
the glue drum roller assembly.
A cap feeding system is integrated with the CLPS-G to provide
a continuous flow of caps to the lidder to sustain the required
throughput.
Close-up of the star-wheel
Glue Applicator
Applications
- Straight-walled containers
- Plastic, metal or composite canisters
- 2” - 8” diameter containers and lids/plugs
- 2” - 12” height containers
- Round canisters and lids
PProduct names, logos, brands and other trademarks featuredare the property of their respective trademark holders
Experience the DEL Difference
Specifications
- Stainless steel shafting, sheet metal (#3 finish),
BLOWER
CEILING SUPPORTS
and structural tubing
TELESCOPING
CAP CHUTE
- 4 1/2" x 15' table top conveyor
MALCO
8-3 31 31 B
209
MALCO
209
MALCO
209
MALCO
209
MALCO
209
OPERATOR INTERFACE PANEL
TELESCOPING AREA
- Stainless steel Imperial hardware
- Clear anodized aluminum
MALCO 209
CUSTOMER CONVEYOR
MALCO
209
209
- Black oxide chain, pulleys & sprockets
MALCO
102.25
MALCO
80.75
209
- Dodge Tigear gear boxes & bearings
97.07
- SMC Pneumatics
39.00
- Clear Polycarbonate guarding
PREMELTER
OIL
HEATER
GLUE APPLICATOR
CLPS-G
PRODUCT FLOW
- Plastic articulating foot pads
GLUE APPLICATOR
HEIGHT ADJUSTMENT
DIRECTION
ROTARY CAPPER
HEIGHT ADJUSTMENT
- Height adjustment kit with digital readout indicator
- THK linear guides
- White virgin Teflon timing screws
- Hand wheel & indicator for height adjustments (3.5" - 9.5" range)
Available Options
259.25
145.40
- Rotary cap feeder
MAIN CONTROL PANEL
END TRANSFER FROM
CUSTOMER CONVEYER
- Conveyors (table-top, air, etc.)
22.94
POWER DROP, 480/60/3, 60 AMP SER.
AIR DROP 1 CFM @ 80 PSI
TIMING SCREW, W/SERVO MOTOR
CAN STOP
CAP DETECTOR
24.58
- Coupon / leaflet inserters
16' GLUE HOSE
OVERHEAD
- Stainless Steel (wash-down) construction
- Ethernet and communication modules
- Electrical and control system upgrade
71.84
PRODUCT FLOW
DIRECTION
POWER DROP,
480/60/3,
15 AMP SER.
CAN CATCH PAN
POWER DROP,
480/60/3,
50 AMP SER.
PM-150
GLUE
PREMELTER
OIL HEATER
- Elevator cap sorter feeder
AIR DROP 30 CFM @ 80 PSI
APPLICATOR
GLUE
CLPS-G
CAPPER
49.63
57.52
OPERATOR INTERFACE PANEL
144.70
53.81
- Digital height and diameter adjust packages
- All domestic and international voltages to meet UL and CE requirements
- Cap detection with reject (fiber optic sensors and/or vision technology)
Contact DEL Packaging, Ltd
18113 Telge Road | Cypress, TX 77429
Phone: 281.653.0099 | Fax: 281.653.0082
http://www.delpackaging.com | [email protected]
Lid Pluggers | Model: CLPS-G