Tooway™ Preliminary Installation Training

Transcription

Tooway™
Preliminary Installation Training
Q2 2011
Summary
q The Tooway KA-SAT user terminal
q
q
q
q
q
q
q
q
Accessories and Multifeed
Health and Safety
Satellite pointing basics
Getting Spot configuration
The pointing process
The Modem GUI
The beeper
The Modem Signalling
page 2
Tooway terminal ODU
page 3
Tooway TRIA description
> RT4000N-010:
- 3W amplifier
- Electromagnetic switch of polarization
(guarantied for not less than 500 switches)
- 300-800MHz Rx, 1800-2300MHz Tx (1
connector)(2 connectors at the beginning)
- Beeper for antenna pointing
- Maximum 50m IFL length with RG6 cable
- Not paint, zinc, no feed/polarizer plastic
cup
> Weight is 3.7 kg for TRIA in its packaging
> MTBF : 11 years (5 year lifetime expected)
> Availability : January 2011
page 4
Tooway User terminal for Ka band
> RM4100N-010:
- One IFL Cable
- 300-800MHz Rx, 18002300MHz Tx (1 connector)
- 1 x Ethernet interface (1Gbps)
- USB interface (for future
service upgrade)
- GUI
- 110/220Vac → 30 Vdc power to
TRIA
page 5
Tooway 0.75 antenna shipping box
>
RA4075N-010:
-
77 x 72cm antenna dish size (packaging size 100 x 80 x 17.5cm)
-
Weight : 12.8kg
-
Integrating carry handle solution
page 6
Tooway 0.75m antenna description (E)
> European mid pole solution (pole not provided by the logistic centre in Europe,
beige color – 40/75mm)
> For Elevation angels up to 45 °
page 7
Az/El adjustment (E)
Waiting picture with the correct antenna colour
> Az adjustment
> El adjustment
page 8
Antenna pointing limits
> Find out the window Elevation
> 56.5° noise heard beat tone
56.5° first hint of a carrier
54.5° modem sync SNR 2.5 dB
53° optimum pointing SNR 9.9
52° modem sync. SNR 0.0 dB
51° modem start sync
first hint of a carrier detectable
<51° noise and heard beat tone
page 9
Antenna pointing limits
2.5°
> The size of the window
2°
Carrier detect
Modem sync
Peeking
optimum
-2.4° -1.8°
1.8° 2.4°
-2°
-2.5°
Antenna peaking behaviour corresponds to a
1.5 m Ku band antenna
page 10
Terminal mount mechanical load
page 11
Alternative Tooway terminal versions
for special applications
> Top pole mount antenna
- Same size antenna mount for higher elevation above 45°
- Delivered with SB1 universal mount, no flexibility on mount diameter
- Antenna colour dark gray as SB1 antenna
> IDU with 2 IFL cables for services including broadcast functions
(Capability to connect separate Ka band receiver)
-
RM4200N-010:
-
1000-1500MHz Rx (1 connector)
1800-2300MHz Tx (1 connector)
1 x Ethernet interface (1Gbps)
USB interface (for future service upgrade)
110/220Vac → 30Vdc power supply (<50m IFL length with RG6)
Black housing with blue LEDs
> Professional terminal 1m/1.2 m antenna under development (Aug 2011)
page 12
Tooway ODU synthesis
> The following table provides G/T and EIRP performances of the Tooway ODU
Description
EIRP @ 29.75GHz
Rx G/T @ 19.95GHz
0.75m / 3W ODU
48.4dBW
17.2dB/K
1.0m / 3W ODU
51.2dBW
20.4dB/K
1.2m / 3W ODU
52.8dBW
23.0dB/K
> Tooway service deployment is foreseen with the smallest one, nevertheless a 1
and 1.2m antenna dish sizes could be used in the edge of KA-SAT coverage
> As 1 and 1.2m antenna dish size have an EIRP higher than 50dBW, the
distributor has to manage license issues
page 13
Tooway terminal setup
Broadband service only
toowayTM TRIA
1-IFL
> Interactive services with 1-IFL modem
toowayTM antenna
Phone
ToowayTM modem
1-IFL
VoIP phone
IPTV STB
Rx/Tx
WiFi router
optional
L/S band cable for tooway
Cable for Analogue phone
Ethernet cable
SCART/DVI/HDMI…for TV
User PC
User TV screen
page 14
Tooway terminal setup
Broadband service only + DTH Ka & Ku band Rx only
> Interactive services with 2-IFL modem
> Ka band Rx only with additional splitter (9°E)
toowayTM TRIA
2-IFL
Ku DTH LNB
> Ku band Rx only with additional Ku band LNB
(0.8°W, 5°E, 13°E or 19°E)
toowayTM antenna
Phone
ToowayTM modem
2-IFL
VoIP phone
Rx
IPTV STB
Tx
WiFi router
L/S band cable for tooway
Cable for Analogue phone
Ethernet cable
SCART/DVI/HDMI…for TV
User PC
User TV screen
Satellite 2 way splitter
Reference : S106
Public cost : 6€ TTC
L band cable for DTH
page 15
Summary
q
The Tooway KA-SAT user terminal
q
q
q
q
q
q
q
Health and Safety
The Modem GUI
The beeper
q Accessories and Multifeed
page 16
Necessary accessories
> Antenna fixation
- Fixation on a wall
- Estimated price 15 – 20 €
- Fixation on the ground (Flat roof)
- Estimated price 20 – 35 €
- Fixation on an angled roof
- Estimated price 50 to 95 €
page 17
Necessary accessories
•Ifl Cables “coaxial cable” connection between Modem
and ODU (TRIA)
•Normally (98% of all cases) one cable for TX and RX
•300 – 800 MHz Fwd Link IF in frequency range of
cable networks and mobile services
•Cable length about 50 m with good RG 6 cable
•Centre wire must be full copper min 1mm Diameter
•Minimum double shielding
•Estimated price 25€/100 m
page 18
Multifeed for TV reception
page 19
Multifeed TV reception
Surfbeam 2 antenna pointed to 9 ° East
Multifeed reception on that antenna from following orbital pos.
5° W (AB 3 Fransat) possible with margin of about 4 dB
0.8° W in principle possible; further test on site
4.8° E in principle possible; further test on site
7° E not possible too close to Terminal feed require special development
9° E not possible as same orbital position of Ka Sat
13° E possible with sufficient margins
16° E not possible due to strong interference and insufficient power satellites
19.2° E possible with sufficient margins
28.5° E possible for all official Freesat channels with margins of
about 4 dB
page 20
Multifeed
28.5 ° East
==
19° E – 13° E – 4.8° E – 0.8° W
==
5° W
page 21
Summary
q
q
q
q
q
q
q
q
The Modem GUI
The beeper
q Health and Safety
page 22
Licensing for Tooway
CEPT RECOMMENDATION:
When a Terminal:
•Receives in the exclusive Satellite Band 19.7-20.2 GHz
• Is located more than 500 m away from any airport
• Transmits in the Exclusive Satellite Band (29.5 – 30.00GHz)
• Has a Transmit Power of no more than 2 Watt
• Generates an EIRP of no more than 50 dBW
NO INDIVIDUAL LICENSING IS REQUIRED
This blanket license applies to most European countries but all installers
must comply with local regulations
Page
23
Paris, 5/8/2011
Network & Product Description
page 23
Health & security
Weight of antenna plus transceiver is 14Kgs
Lifting the antenna over shoulder – new drawing
Balance
Fix transceiver after securing antenna on mast
page 24
Health & security
Assessing building earth
Before linking the Tooway coaxial cable into the building
earthing system you should assess the building earth. If the
property does not conform to local regulations then the
customer must be informed
If the property does conform
then you should earth the
system to prevent static build up and or touch currents
•Identify a suitable earthing location (e.g. socket, lighting
circuit, electrical circuit)
•Install a coaxial cable earthing block and earth as shown
page 25
Summary
q
q
q
Health and Safety
q
q
q
q
q
The Modem GUI
The beeper
q Satellite pointing basics
page 26
Installation position/ Line of Sight
There are 4 criteria for choosing a site for antenna
installation
1. Clear Line Of Sight (L.O.S)
2. Suitable surface for fixing antenna mount
3. Cable route and distance – Max 50m
4. Safety
page 27
Tooway manual
Line of Sight
There must be a 10 degree separation between the line of
sight angle and any obstacles
Normally a wall installation at high level gives the clearest L.O.S.
page 28
Summary
q
q
q
q
Health and Safety
q
q
q
q
The Modem GUI
The beeper
q Getting Spot configuration
page 29
FWD link user beams
page 30
Mapping and configuration
>
>
>
>
>
Color in the pdf
RED
GREEN
BLUE
YELLOW
Color in Viasat GUI Number in Viasat GUI
BLUE
1
ORANGE
2
PURPLE
3
GREEN
4
> Beam number
Beam color Symbol rate
Polarization
> 1
Blue
50
19.73125
> 2
Orange
50
19.99375
> 3
Purple
50
20.11875
> 4
Green
50
19.85625
Center frequency
RHCP
RHCP
LHCP
LHCP
page 31
Ka Sat finder
> http://finder.tooway-instal.com
page 32
Ka Sat finder
> http://finder.tooway-instal.com
page 33
KA-sat Finder iPhone
page 34
34
Summary
q
q
q
q
q
Health and Safety
q
q
q
The Modem GUI
The beeper
q The pointing process
page 35
Tooway Terminal pointing procedure
Presumption Modem installed and
IFL connected to TRAI
>
>
>
>
>
>
>
>
>
>
Zusammenbau der Antenne
Richtigen SAT-Spot finden
Modem und Laptop verbinden, enter 192.168.100.1
Goto Modem GUI Install menu; enter:
192.168.100.1/?page=install
Korrekte Spotdaten eingeben => TRIA beeper starts
Antenne einstellen => Modem lock tone
Azimuth fixieren
Elevation fixieren => continuous tone
Antenna final fixation
Pointing check (Daumen Check)
page 36
Summary
q
q
q
q
q
q
Health and Safety
q
q
The beeper
q The Modem GUI
page 37
Terminal GUI 1.0.3
http://192.168.100.1
page 38
Terminal GUI 1.0.3
http://192.168.100.1/?page=install
page 39
Terminal GUI 1.0.3
page 40
GUI Version 1.1.1
http://192.168.100.1
page 41
GUI Version 1.1.1
page 42
GUI 1.1.1
page 43
GUI 1.1.1
http://192.168.100.1/install
page 44
GUI 1.1.1
page 45
GUI 1.1.1
page 46
GUI 1.1.1
page 47
Summary
q
q
q
q
q
q
q
Health and Safety
The Modem GUI
q
q The beeper
page 48
Az/El adjustment (E)
Waiting picture with the correct antenna colour
> Az adjustment
> El adjustment
page 49
Pointing Beeper process Phase
In Az, Modem detect the first maximum
Lower Beep Beep tone
First maximum
Constant Beep Beep tone
Satellite
Fwc carrier
SNR
AGC tone (bip bup), Modem Carrier
detection and synch.
Heard Beat
SNR about 0 dB
Az or El angle of antenna
page 50
Pointing Beeper process Phase
In Az, Modem detect the first maximum
Maximum
peeking
point
Second maximum
0.15 dB below maximum
Continuous tone
Lower Beep Beep tone
Satellite
Fwc carrier
SNR
AGC tone (bip bup), Modem Carrier
detection and synch.
Heard Beat
SNR about 0 dB
Az or El angle of antenna
page 51
Summary
q
q
q
q
q
q
q
q
Health and Safety
The Modem GUI
The beeper
q The Modem Signalling
page 52
Modem LED legende
page 53
Thank you
for your kind attention!
Enjoy the film!!
page 54

Tooway™ Preliminary Installation Training

Transcription

Similar documents