SECTION 17 • Tools

4
5
Router Bits
Boring Bits
Blades
Section 17D
Section 17E
Section 17F
7
Office
8
Closet
9
Lighting
10
Sliding
Door
hardware
Fastcap Products
Section 17G
11
12
13
14
15
Glues,
Silicones
& Sealers
16
Finishing
products &
abrasives
17
TOOLS
18
19
builders commercial
hardware
display
hardware
20
sinks
& faucets
Te l : 1 8 0 0 6 1 9 . 5 4 4 6 • F a x : 1 8 0 0 8 7 6 . 7 4 5 4
Cabinet
Doors &
TAMBOURS
Version : 2009
Veneers & Edgebanding CorbelS &
Moldings
Decorative
Panels
www.richelieu.com
6
Section 17C
3
Section 17B
Kitchen
Solutions
SECTION 17 • Tools
2
LEGs
& CASTERs
INDEX
1
slides
Section 17A
hinges
Safety Products
screws
FURNITURE
& fasteners EQUIPMENT
Manual Tools
Air Tools
and
Electrical
Section 17
INDEX
| Tools |
Electrical and Air Tools
Section 17A
Blum Minipress drill 220V
INCLUDES
• Standard chuck
• Basic ruler 600 mm with 2 positioning stops
• 3-phase motor 380 / 220V, 50 Hz, 0.75 kw
• 1 set of tools
• 5 spindle swiveling heads, swing arm for insertion ram, dust collection outlet
description
blum minipress drill
heads
5
unit
m51p1053
Blum MINIDRILL « Inserta » 220V
INCLUDES
• The machine itself with the base and fencing system, Blum drilling pattern, 1 phase
motor 220V , 50Hz, 0,75Kw
• One basic ruler of 600 mm length with ruler stop
• One tool kit
• Other motor types are available upon request
• 3 spindle swiveling heads (+ 2 optional), dust collection outlet
description
blum drill insertA 220v
Minipress « MSP » with a unique
swivel head. Available in two models.
For quick and easy precise drilling and
insertion. System 32 mm compatible.
heads
3
unit
m51p105350
MiNiDRILL « MSP » is a drilling machine for an efficient processing of the
INSERTA hinge program. This simplified
version of the Minipress is easy to use
and safe to handle. The MiNiDRiLL MSP fulfils all existing safety and work technology requirements including built-in
safety motor « switch off » device . The
INSERTA program has been designed to
enable the hinge to be fixed to the door
without the need of tools.
Blum « Ecodrill »
specifications
• Simple hand held tool to drill accurate hole patterns for Blum hinges.
• Driven by hand drill.
• Variable drilling distance (from 2 to 8).
• Clamps to work piece.
• Ecodrill includes: 1pce. drilling gauge, 1pce. drill Ø 35 mm, 2 pcs, drills Ø 8 mm,
2 pcs. Tor x bits.
description
ecodrill kit
NO.
m311000
length
n/A
QTy/Box
1
(A) replacement drill bits (shank 8 mm - pin 10 mm)
m02zb08
30 mm
1
(B) replacement drill bits (shank 35 mm - pin 10 mm) m02zb35
30 mm
1
GIZMO 32 mm drilling tool jig
• 32 mm portable line boring tool boring jig
• Designed to work with all hand drills; Lightweight
description
drilling template for 32 mm
unit
gizmo
The GIZMO drilling template is accurate, simple, versatile and
an economical tool. It allows you to install hinges and mounting
plates without effort. You will also be able to drill accurately
your shelves supports holes and it is ideal for drawer slides installation. You can install the drilling template on your portative
drill. The guides of the tool are adjustable on the front and sides.
It can drill at the same time two holes of 5 mm diameter on a
distance of 32 mm. A divider allows you to drill the next holes
without having to measure again.
Version : 2009
Page 17A2
www.richelieu.com
Te l : 1 8 0 0 6 1 9 . 5 4 4 6 • F a x : 1 8 0 0 8 7 6 . 7 4 5 4
1
screws
FURNITURE
& fasteners EQUIPMENT
| Tools |
Electrical and Air Tools
Section 17A
2
3
hinges
Blum replacement parts for MINIPRESS/MINIDRILL/PRO-CENTER
REF. description
2
1/2 rapid collar
unit
MFZ1030
MZS200003
7
RULES HARDWARE
MZL1253
8
ADDITIONAL RULE (MM AND IN.)
MZL1250
9
K.D. Fitting
mzr1000
10
PERIPHERAL CHUCK
M301323
11
central CHUCK
M301324
12
ADJUSTABLE RULER SUPPORT
MZV1000
13
GEAR BOX MS-MSP
M50130M00
13
7 DRILLING HEADS
MZK1000
14
MULTIPLE RULER STOP
MZS0040
15
insertion ram for 107° / 110° / 120° hinges (suitable for minipress / Pro-Center)
mzm0010
16
insertion ram for processing of dowel plates (suitable for minipress / Pro-Center)
mzm0050
17
insertion ram for Connector housing 40011 (suitable for minipress / Pro-Center)
mzm0070
4
3
11
3
17
Veneers & Edgebanding CorbelS &
Moldings
Decorative
Panels
2
16
10
mzm0011
mzm0018
15
9
insertion ram for 100° and profile door hinge (suitable for minipress / Pro-Center)
insertion ram for wide angle hinge, steel boss (suitable for minipress / Pro-Center)
13
Sliding
Door
hardware
15
15
Pro-Center as shown
8
RULER STOP - LEFT
7
MZS200002
6
6
RULER STOP - RIGHT
5
M301304
6
4
M301316
Boring stop
Lighting
Plastic protector
5
Closet
4
Office
mzk1130
Kitchen
Solutions
MFZ1000
clutch for quick connector (TO BE USED WITH MZK1000, TO ADAPT ON THE MZF1000)
LEGs
& CASTERs
rapid collar
3
slides
3
5
12
13
7
6
8
Cabinet
Doors &
TAMBOURS
14
9
4
2
15
Glues,
Silicones
& Sealers
3
11
13
16
Finishing
products &
abrasives
10
12
14
17
TOOLS
6
8
18
builders commercial
hardware
display
hardware
7
Page 17A3
20
Te l : 1 8 0 0 6 1 9 . 5 4 4 6 • F a x : 1 8 0 0 8 7 6 . 7 4 5 4
sinks
& faucets
www.richelieu.com
19
Version : 2009
| Tools |
Electrical and Air Tools
Section 17A
FEIN MULTIMASTER kit
•
•
•
•
•
The fein MultiMaster eases all kinds of tough manual labour
Universal use for sanding, sawing, scrapping, scouring, cleaning, and polishing
Oscillating action (3.2 angular degrees at a frequency of up to 21.000 / min.)
Easy and safe to handle
A great selection of accessories for any kind of application
The Fein Multimaster
is the best
multi-purpose choice...
specifications
• Electric absorbed power 180 W
• Sanding pad oscillations 12000 - 21000 / min*
• Cable with plug 5 m
• Weight 1.1 kg
• Width of the sanding pad 80 mm
MULTIMASTER D030270 starting kit
•
•
•
•
•
•
•
1 MultiMaster tool
1 unperforated sanding pad
4 x 5 sanding sheets, grain 60, 80, 120 and 180
1 E-cut saw blade, 35 mm
1 rigid scraper
1 wrench
1 screw
description
Starting kit
unit
D030270
Removing floor covering
For all floor-covering
removal tasks.
* Sanding pad oscillation locked at 21000 / min.
MULTIMASTER D030271 select kit
•
•
•
•
•
•
•
•
•
1 MultiMaster tool
1 unperforated sanding pad
4 x 5 sanding sheets, grain 60, 80, 120 and 180
1 E-cut saw blade, 35 mm
1 HSS segmented saw blade, 80 mm
1 carbide segmented saw blade, 63 mm
1 rigid scraper
1 wrench
1 screw
description
select kit
home construction
For any kind of home construction
and improvement.
unit
D030271
* Sanding pad oscillation 12000 - 21000 / min.
MULTIMASTER D030272 professional kit
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1 metal case
1 MultiMaster tool
1 unperforated sanding pad
1 perforated sanding pad
4 x 5 unperforated sanding sheets, grain 60, 80, 120 and 180
4 x 5 perforated sanding sheets, grain 60, 80, 120 and 180
1 Mini-cut blades kit
1 E-cut saw blade, 35 mm
1 HSS segmented saw blade, 80 mm
1 carbide segmented saw blade, 63 mm
1 rigid scraper
1 dust extractor kit
2 adapters for vacuum cleaner
1 nose
1 wrench
1 screw
description
professional kit
unit
D030272
floor covering
Ease the installation and adjustment of any kind of floor covering.
furniture and cabinet building
For any kind of furniture and
cabinet building.
* Sanding pad oscillation 12000 - 21000 / min.
Version : 2009
Page 17A4
www.richelieu.com
Te l : 1 8 0 0 6 1 9 . 5 4 4 6 • F a x : 1 8 0 0 8 7 6 . 7 4 5 4
1
screws
FURNITURE
& fasteners EQUIPMENT
| Tools |
Electrical and Air Tools
Section 17A
2
Triangular sanding sheets with velcro attachment
Universal use on almost all materials
Perforated sheets are used with perforated
Sanding pads, and with the dust extractor kit
type
unperforated
unit
D030250
QTy/Box
50
unperforated
d030221
50
unperforated
d030222
50
perforated
d030259
50
unperforated
d030223
50
b
120
perforated
d030260
50
a
180
unperforated
d030224
50
6
80
120
Kitchen
Solutions
b
a
B
5
60
80
LEGs
& CASTERs
a
a
4
grit
40
a
slides
ref.
a
3
•
•
•
•
hinges
Sanding sheet for MULTIMASTER & FSC 2.0
7
Office
triangular sanding sheets kit with velcro attachment
grit
unit
60, 80, 120, 80 & 240
D030249
*10 sheets of each grain
8
C
9
Lighting
QTy/Box
20
e
D030258
2
13
f
14
Cabinet
Doors &
TAMBOURS
supersoft pads
• « Supersoft » felt sanding pad for special applications like polishing bronze, brass,
stainless steel, aluminum and other decorative metals
• Also used to polish stone
• Should be used with appropriate polishing product, depending on the material to
be polished
type
unit
QTy/Box
f
supersoft perforated
d030262
2
e
12
*Sold in packs of 2
11
QTy/Box
2
10
unit
D030220
d
Veneers & Edgebanding CorbelS &
Moldings
Decorative
Panels
rigid sanding pads
ref.
type
D
unperforated pad
Sliding
Door
hardware
Sanding pad for MULTIMASTER & FSC 2.0
unperforated pad
Closet
Sanding finger
• Sanding sheets for sanding fingers with velcro attachment
• Used with the D030252 and D030253 sanding finger pads
• Universal use on almost all materials.
ref.
grit
unit
c
80
D030254
*Sold in packs of 2
D030253
17
h
18
20
Page 17A5
sinks
& faucets
Te l : 1 8 0 0 6 1 9 . 5 4 4 6 • F a x : 1 8 0 0 8 7 6 . 7 4 5 4
19
Version : 2009
www.richelieu.com
builders commercial
hardware
display
hardware
• Carbide rasps for hard material, like tile edges, natural and artificial stone, tile
adhesive, concrete etc.
ref.
type
unit
h
triangular
D031127
TOOLS
Carbide rasp for MULTIMASTER & FSC 2.0
16
2
2 mm - velcro on both sides
15
G
G
Finishing
products &
abrasives
QTy/Box
2
Glues,
Silicones
& Sealers
Sanding finger
• For use in extremely tight and hidden spots and in precision work
width
unit
G
7 mm - velcro on top
D030252
| Tools |
Electrical and Air Tools
Section 17A
E-Cut straight saw blade for MULTIMASTER & FSC 2.0
• For wood, plastics and non-ferrous metals
ref.
a
blade
35 mm
type
single row
b
35 mm
a
65 mm
b
length
50 mm
unit
D030241
3/pack
D030341
10/pack
D030441
double row 50 mm
d031123
d031133
d031183
single row
50 mm
d030242
d030342
d030442
65 mm
double row 50 mm
d031124
d031134
d031184
A1
29 mm
BI-metallic
50 mm
d030282
d030283
d031185
B1
44 mm
BI-metallic
50 mm
d030292
d030293
d030294
a
A1
B1
mini-cut high-speed steel (HSS) saw blades
• High-speed steel (HSS) for wood, plastics and non-ferrous metals or regular steel
for wood and soft materials
REF. depth x width
type
unit
QTy/Box
c
20 mm x 20 mm
hss
D030244 2
d
20 mm x 10 mm
hss
D030245
2
d
30 mm x 10 mm
hss
D030247
2
e
mini-cut kit (4 blades + blade holder)
D030243
2
B
c
e
d
*Sold in packs of 2, except D030243 sold by unit
Scraper for MULTIMASTER & FSC 2.0
f
G
h
i
• Stopping knife for removing residual carpet and tile adhesive, scale, underseal etc.
(D030227), and for removing old paint, elastic sealants, stickers etc. (D030228)
ref. description
unit
QTy/Box
f
rigid stopping knife
D030227
1
g
D030228
flexible stopping knife
2
*Sold by unit, except D030228 sold in packs of 2
Segment blade for MULTIMASTER & FSC 2.0
• The convex segment blade is used for cutting rigid materials such as plastics,
linoleum, rubber, cardboard, looped fabric/carpet etc.
• The concave segment blade is used for cutting soft materials such as felt, leather
and polystyrene
ref. description
unit
QTy/Box
h
convex segment blade
D030229
1
i
d030261
concave segment blade
2
j
Circular saw blade for MULTIMASTER & FSC 2.0
• High-speed steel (HSS) saw blades with double row of teeth
• Used to cut wood, fiber-glass and non-ferrous metals
ref. Blade Ø type
unit
2/pack
5/pack
j
80 mm
segmented D030226 D030276 D030296
k
63 mm
circular
d030237
d031186
K
80 mm
circular
d030238
d031189
L
90 mm
Cranked
D030266
d031187
d031190
D030266
• D030240: Regular steel saw blade, segmented with douzzzrow of teeth, cropped to
enable you to work flush to the surface. Used to cut wood and soft material only
• D031125: Carbide-tipped segment saw blade, cropped. Used to cut through marble
and concrete trass joints
ref. Blade Ø type
unit
N
84 mm
segmented
D030240
O
63 mm
segmented
L
k
L
Legend
M
N
D031125
Reverse black item no. = New item since last edition
no.
x0123456789
Version : 2009
Page 17A6
www.richelieu.com
Te l : 1 8 0 0 6 1 9 . 5 4 4 6 • F a x : 1 8 0 0 8 7 6 . 7 4 5 4
1
screws
FURNITURE
& fasteners EQUIPMENT
| Tools |
Electrical and Air Tools
Section 17A
2
D031112
D031112
D031111
4
2 screws kit for multimaster
3
unit
D031111
slides
description
key for multimaster
hinges
Replacement part for MULTIMASTER & FSC 2.0
5
LEGs
& CASTERs
Profikit tiling 6 items for MULTIMASTER & FSC 2.0
6
Kitchen
Solutions
• 1 carbide-tipped segment saw blade
• 1 carbide-tipped circular saw blade rasp
• 1 tugsten carbide-triangular rasp
• 1 E-Cut blade - 65 x 50 mm - regular teeth
• 1 flexible scraper blade, 1 bi-metal E-Cut blade
description
Profikit tiling
Office
7
unit
D030264
8
Closet
9
10
Sliding
Door
hardware
unit
D031128
11
Veneers & Edgebanding CorbelS &
Moldings
Decorative
Panels
• 1 E-Cut blade - 65 x 50 mm - standard teeth
• 1 E-Cut blade - 65 x 50 mm - japanese teeth
• 1 E-Cut blade - 35 x 50 mm - standard teeth
• 1 rigid scraper blade
• 1 convex segment blade, 1 tugsten carbide-triangular rasp
description
Profikit flooring
Lighting
Profikit flooring 6 items for MULTIMASTER & FSC 2.0
12
Profikit for wood 6 items for MULTIMASTER & FSC 2.0
13
14
Cabinet
Doors &
TAMBOURS
• 1 E-Cut blade - 35 x 50 mm - japanese teeth
• 1 E-Cut blade - 65 x 50 mm - japanese teeth
• 1 bimetal E-Cut blade
• 1 triangular velcro backing pad
• 5 triangular sandpaper 60 grit
• 5 triangular sandpaper 120 grit
description
Profikit wood
unit
D031129
15
Glues,
Silicones
& Sealers
Finishing
products &
abrasives
16
Profile sanding kit for moldings 8 items for MULTIMASTER & FSC 2.0
17
TOOLS
• 1 profile clamp
• 1 trapezoidal profile
The multimaster profile sanding kit provides flexibility in sanding hard-to-reach
• 1 « V » shape profile
places and custom profiles or contours. 6 replaceable profiles enable you to sand concave
• 1 concave profile
and convex surfaces, for example tongue-and-groove boards. It’s perfect for sanding deep
• 1 convex profile (large)
grooves, intricate carvings and curved moldings, and ideal for restoration work.
• 1 convex profile (small)
• 1 flat profile
• 15 sheets assorted sandpaper (grits 80, 120 & 180)
description
unit
Profikit molding
D031151
18
20
Page 17A7
sinks
& faucets
Te l : 1 8 0 0 6 1 9 . 5 4 4 6 • F a x : 1 8 0 0 8 7 6 . 7 4 5 4
19
www.richelieu.com
builders commercial
hardware
display
hardware
Version : 2009
| Tools |
Electrical and Air Tools
Section 17A
Fein Turbo1 dust extractor
INCLUDES
• 5 micron cloth bag
• 16 foot hose 1-1/4” dia.
• Crevice nozzle
• Round brush
• Adaptor sleeve for tools
Quiet: producing 630b(a) noise level at
3.5 feet, the FEIN TURBO1 proves that quality can be achieved without compromise.
specifications
• Model 91155
• Autostart
• Power: 120V / 8 amps
• Power cord length: 16 ft
• Watts: 1000 W
• Hose length: 16 ft
• Dimensions: 23” x 15-1/2”
• Capacity dry: 6 gal./ 23 gal.
• Static eater lift: 90 inches
• Capacity wet: 5.3 gal. / 20 l
• Air flow:116 cfm
• Noise level at 3.5 ft:63 decibels
• Net weight: 17-3/4 lbs The Fein Turbo1
combines easily
portability with
superior power
description
dust extractor
capacity
6 gallons
unit
D030230
vacuum bags
6 gallons
d030235
Fein Turbo2 dust extractor
• Features an automatic on/off triggered by the connected power tool
• Lightweight and easy to handle
• The most quiet and powerful of its category
INCLUDES
• Fabric filter
• 17 ft. hose
• 16 ft. power cord
specifications
Power: 120 volt, 9.5 amp
Input: 1000 watts
Standard filter: 5 microns
Cord length: 16 feet
Air flow: 116 cfm
Weight: 28½ lbs
Noise level at 3.5 feet: 57.8 dB(a)
Hose: 16 ft x 1¼ in. dia.
Capacity wet: 6.8 gal. / 26 litres
Capacity dry: 9 gal. / 34 litres
Dimensions: 25 x 16¼ in.
Static water lift: 90 inches
NOTE: other accessories available on request
description
dust extractor
capacity
7.3 gallons
unit
D030231
vacuum bags
7.3 gallons
d030236
Dust extractor and sandind kit for Multimaster & FSC 2.0 Tool
INCLUDES
• 2 perforated sanding pads
• 15 sanding sheets, grain 60, 80 and 120
• 1 extractor hood with suction tube
• 2 hose nozzles for hose connection 27 mm and 32 mm
• 2 adapters for domestic vacuum cleaners
description
dust extractor and sanding kit
Page 17A8
unit
D030257
www.richelieu.com
Te l : 1 8 0 0 6 1 9 . 5 4 4 6 • F a x : 1 8 0 0 8 7 6 . 7 4 5 4
Version : 2009
1
screws
FURNITURE
& fasteners EQUIPMENT
| Tools |
Electrical and Air Tools
Section 17A
2
3
Heavy-duty design
Perfect dust extraction
Quick and easy sanding sheets installation
High performance on all material
Polyamid and aluminum engine housing
4
slides
•
•
•
•
•
hinges
6" orbital sander
5
LEGs
& CASTERs
Specifications
• Model MSF 636-1
• Electric absorbed power: 380 W
• Weight: 1.7 kg
• Voltage: 120 V
• Radial run: 8.4 mm
• Speed; 7500 t / min
• Horsepower: 3-1/4 HP
6
COMPLE
8
Closet
17A
7
Vaccum
The Fein
dust-free
sanding system
Office
NTARY P
ME
UC
ROD T
horsepower
3-1/4 HP
unit
D031150
9
Lighting
description
6"Orbital sander MSF636-1
Kitchen
Solutions
Standard accessories
• Dust extraction hood
• Orbital head for 150 mm Ø sanding support
• Ø 150 mm medium sanding support
• Self-gripping support
• Wrench kit
10
Sliding
Door
hardware
11
Veneers & Edgebanding CorbelS &
Moldings
Decorative
Panels
12
13
14
Cabinet
Doors &
TAMBOURS
15
Glues,
Silicones
& Sealers
16
Finishing
products &
abrasives
17
TOOLS
18
builders commercial
hardware
display
hardware
Page 17A9
20
Te l : 1 8 0 0 6 1 9 . 5 4 4 6 • F a x : 1 8 0 0 8 7 6 . 7 4 5 4
sinks
& faucets
www.richelieu.com
19
Version : 2009
| Tools |
Electrical and Air Tools
Section 17A
Compressed air nailer 18 gauge
features
• Quick release
• Two spring holder
• Use nails from 3/4” to 2”
Comes in portable case that includes
• Goggles
• Oil bottle
• Plug
• Parts chart
description
compressed air nailer
nails length
3/4" to 2"
unit
980180
*See nail serie in the next following pages (17A section)
Compressed air nailer 16 gauge
features
• Quick release
• Two spring holder
• Use nails from 1-1/4” to 2-1/2”
Comes in portable case that includes
• Goggles
• Oil bottle
• Plug
• Parts chart
description
compressed air nailer
nails length
1-1/4" to 2-1/2"
unit
981160
*See nail serie in the next following pages (17A section)
Compressed air nailer / stapler 18 gauge
features
• Quick release
• Two spring holder
• Can be used as the nailer 980180 and the stapler 9889040
Comes in portable case that includes
• Goggles
• Oil bottle
• Plug
• Parts chart
description
compressed air nailer/stapler
unit
983180
*See nail and staple serie in the next following pages (17A section)
Version : 2009
Page 17A10
www.richelieu.com
Te l : 1 8 0 0 6 1 9 . 5 4 4 6 • F a x : 1 8 0 0 8 7 6 . 7 4 5 4
1
screws
FURNITURE
& fasteners EQUIPMENT
| Tools |
Electrical and Air Tools
Section 17A
2
hinges
Compressed air stapler 18 gauge
3
features
• Quick release
• Two spring holder
• Use staples from 1/2" to 1-1/2"
4
slides
5
unit
9889040
6
staples length
1/2" to 1-1/2"
Kitchen
Solutions
description
compressed air stapler
LEGs
& CASTERs
Comes in portable case that includes
• Goggles
• Oil bottle
• Plug
• Parts chart
*See staple serie in the next following pages (17A section)
7
Office
Nailer I-pin 23 gauge
8
unit
982230
9
nails length
5/16" to 1"
Lighting
description
compressed air nailer I-PIN
Closet
features
• Quick release
• Two spring holder
• Use nails from 1/2” to 1-9/16” (See next following pages; Look for nails series 982)
*See nails serie in the next following pages (17A section)
10
Sliding
Door
hardware
Veneers & Edgebanding CorbelS &
Moldings
Decorative
Panels
11
Upholstering stapler 23 gauge
staples length
5/32" to 9/16"
unit
98711671
13
description
upholstering stapler serie 71
12
features
• Quick release
• Two spring holder
• Use staples serie 71 from 5/32” to 9/16”
(See next following pages; Look for nails series 987)
*See staple serie in the next following pages (17A section)
14
Cabinet
Doors &
TAMBOURS
CRISP-AIR 18 nailer & arrow staple
15
economical
version
16
Finishing
products &
abrasives
unit
983181
17
TOOLS
description
crisp-air 2-1 nail & arrow staple machine
Glues,
Silicones
& Sealers
features
• Takes 3/4" to 2" 18 gauge brad nails
• Takes 18 gauge narrow staples from 5/8" to 1-1/2"
• Steel body construction
• Lightweight
• Depth adjustment
• Comes in a kit with tool oil, plug, and parts chart
18
builders commercial
hardware
display
hardware
Page 17A11
20
Te l : 1 8 0 0 6 1 9 . 5 4 4 6 • F a x : 1 8 0 0 8 7 6 . 7 4 5 4
sinks
& faucets
www.richelieu.com
19
Version : 2009
| Tools |
Electrical and Air Tools
Section 17A
Max I-pin nailer 23 gauge
features
• Fires 23 gauge pins from ½” to 1-3/8” leg length
• Professional series, best of class
• Anti-dry mechanism
• Tool will not fire when pins are not in the magazine
• Prevents dry firing and driver mark on work piece
• Very powerful it can be used in hard wood
• Window on magazine to signal when pins are getting low
• No-Mar contact tip included, belt hook on tool, depth control
description
nailer max i-pin gauge 23
pins length
1/2" to 1-38"
unit
9802335
Compressor Twin Stack 200
features
• 2 tanks of 2 gallons each
• Weight of 46lbs
• 3400 RPM
• 15 amps
• 4,5 CFM
• 90 PSI
description
compressor twin stack 200
capacity
4 gallons
unit
9802001
Compressor/nailer kit with hose
features
• A Fini big Pioneer contractor grade
• Compressor of 2 horse-power, with a 5.25 gallon tank
• It weight only 46 pounds so it is very easy to handle
• Comes with a brad nailer of 18 gauge for nails of ¾" to 2"
• Comes with hose of ¼" X 25’, all necessary connectors and a 1000 brad nails box
• With fittings (3 types)
description
compressor / nailer kit with hose
capacity
5,25 gallons
unit
980716
Compressor/nailer kit with hose
features
• Kit including compressor 1.5 HP, lightweight & powerful
• 2.5 gallon tank
• Oil lubricated
• 90 PSI
• 18 gauge brad nailer, takes ¾” to 2” brads
• Depth control
• 2 spring holder, double pusher spring
• Steel body
• Comes with 25' x ¼" air hose, fittings & 500 brad nails
description
compressor / nailer kit with hose
unit
980711
Version : 2009
Page 17A12
www.richelieu.com
Te l : 1 8 0 0 6 1 9 . 5 4 4 6 • F a x : 1 8 0 0 8 7 6 . 7 4 5 4
1
screws
FURNITURE
& fasteners EQUIPMENT
| Tools |
Electrical and Air Tools
Section 17A
2
hinges
Nail I-pin 23 gauge
3
compatible with
• ATRO Mini Pinner
• BOSTITCH Mini Pinner
• PREBENA A1L Pinner
• BEA S700 Pinner
• HAUBOLD ST06 Pinner
• SENCO CZ Pinner
• KIHLBERG 506 Pinner
4
slides
3/4"
98234
10000
1"
98210
10000
1-3/8"
982138
10000
1-1/2"
982112
10000
1-9/16
982916
10000
7
10000
6
98258
5
5/8"
Office
QTy/Box
10000
Kitchen
Solutions
box
98212
LEGs
& CASTERs
length
1/2"
8
Closet
*sold in complete box only
Staple serie 71 / 23 gauge
9
Lighting
compatible with
• BEX 71
• ATRO 72
• FASCO 7C & S3G
• BEA 71
• BOSTITCH 7
• HAUBOLD 7100
• SENCO C
• JK 670
• RAINCO 7C
• CAMPBELL-HAUSFELD SN162H
• STAN-TECH SD52L-38
• PORTER CABLE US58
10
Sliding
Door
hardware
11
Veneers & Edgebanding CorbelS &
Moldings
Decorative
Panels
QTy/Box
10000
3/8"
98738
10000
1/2"
98712
10000
9/16"
987916
10000
13
box
98714
12
length
1/4"
Cabinet
Doors &
TAMBOURS
14
*sold in complete box only
Brad nail
gauge 18
box
981012
QTy/Box
5000
9801316
1"
9810100
5000
1-1/4"
980114
1-3/16"
9811316
5000
1-3/8"
980138
1-1/4"
981114
5000
1-1/2"
980112
1-3/8"
981138
5000
1-3/4"
980134
1-1/2"
981112
5000
2"
980200
1-9/16"
9811916
5000
2-1/4"
980214
1-3/4"
981134
5000
2-1/2"
980212
2"
981200
5000
Version : 2009
*sold in complete box only
Page 17A13
20
Te l : 1 8 0 0 6 1 9 . 5 4 4 6 • F a x : 1 8 0 0 8 7 6 . 7 4 5 4
sinks
& faucets
www.richelieu.com
19
5000
1-3/16"
18
5000
981034
17
98101116
3/4"
16
11/16"
980100
builders commercial
hardware
display
hardware
98001316
1"
TOOLS
13/16"
Finishing
products &
abrasives
length
1/2"
15
gauge 16
box
Glues,
Silicones
& Sealers
length
| Tools |
Electrical and Air Tools
Section 17A
Gauge 18 staple
• Diversion points allow staples to open in the wood thus adding to the grip
length
1/2"
narrow
988012
diversions
QTy/Box
5000
5/8"
988058
5000
3/4"
988034
5000
7/8"
988078
1"
988100
989078
5000
5000
1-1/8"
988118
1-1/4"
988114
989118
5000
1-1/2"
988112
5000
5000
*sold in complete box only
Nail compatibility chart
16 gauge nails
Arto Tip Tools
18 gauge nails
Atro Tip Tools
18 gauge nails
Hitachi NT50AD, NT45
Duofast 700, LFN, 764A
Bea SK300
Stan Tech SDN 18BR
Max NF 16
Bex 18ga Bradders
Accuset A125BN
Airy ATM 0365, ATF 0350
Bostitch BT1300, T294, BT35, BT50
Campbell Hausfeld NB0030
Bea SK400
Paslode F18 11
Spotnail DB, GB, CB
Hitachi NT65
Fasco GN Tools
Duofast 8840, BDN4440 BDN4450
Paslode F16, IMF250F
Haubolds SK N12
Makita AF501
Bex 16ga Bradders
Max NF201, NF211
FA500 FN tools
Porta Cable BN125, BN200
Porta Cable FN200, FN250, CFN250
Senco AX LS Tool
nail chart
Bostitch BT1200
Haubold SKN16
Campbell Hausfeld NB006500
Staple compatibility chart
Narrow crown and diversion points staples are similar to the “L” serie from SENCO
Bex 90 Series Tools
Bea 90/38-15, 90/38-157, 190/32
Fasco 90 Series Tools
Haubold 6000
Josef Kihlberg 781
Campbell Hausfeld SW258K00
Stan Tech SDS 18-14-26
Crafstman 18300, 18306
Porter Cable N5100, N5150
Atro 90 Series Tools
Duofast 1800
Senco L
Spotnail HL3852, FS4825
Airy AST 0626
Hitachi N804
Crisp Air 2 in 1 Tool
staple chart
Version : 2009
Page 17A14
www.richelieu.com
Te l : 1 8 0 0 6 1 9 . 5 4 4 6 • F a x : 1 8 0 0 8 7 6 . 7 4 5 4
1
screws
FURNITURE
& fasteners EQUIPMENT
| Tools |
Electrical and Air Tools
Section 17A
2
hinges
Heavy-duty 3/8” VSR drill with metal keyless chuck
unit
d21009
4
chuck
3/8"
slides
description
electrical Drill
3
• All-metal chuck offers greater durability.
• The 7.0 Amp motor offers high performance and over load protection 3/8" metal keyless chuck offers greater bit retention
5
LEGs
& CASTERs
Kitchen
Solutions
6
Heavy-duty 3/8” VSR right angle drill (0-1200)
• 100% ball-bearing construction provides durablility and longer tool life compact right-angle design for easy access in tight
places paddle switch is ideal for use in awkward positions and limited access areas
unit
dw160
7
chuck
3/8"
Office
description
electrical angle Drill
8
Closet
9
Lighting
Heavy-duty 1/2” 14.4V cordless compact drill/driver kit
10
chuck
1/2"
unit
dc728ka
11
Veneers & Edgebanding CorbelS &
Moldings
Decorative
Panels
description
cordless drill
Sliding
Door
hardware
• Compact size: fits into the tightest conditions lightweight design (4.7 lbs.) minimizes user fatigue, high performance motor
delivers 400 in.-lbs of maximum torque
12
Heavy-duty 3/8” 14.4V cordless right angle drill/driver kit
unit
dw966k2
14
chuck
3/8"
Cabinet
Doors &
TAMBOURS
description
cordless angle drill
13
• 2 speed ranges 0-400/0-1,250 rpm for increased user flexibility providing a wide range of applications 210 in-lbs of maximum
torque for heavy-duty applications such as turning large bits and fasteners multi-grip trigger provides comfort and convenience
by allowing the user to get into tighter spaces while still having access to the trigger
15
Glues,
Silicones
& Sealers
Finishing
products &
abrasives
16
Heavy-duty 1/2” 18V cordless compact drill/driver kit
• Compact size: fits into the tightest conditions lightweight design (5.2lbs.) minimizes user fatigue high performance motor
delivers 450 in-lbs of maximum torque
unit
dc759ka
17
chuck
1/2"
TOOLS
description
cordless drill
18
builders commercial
hardware
display
hardware
Page 17A15
20
Te l : 1 8 0 0 6 1 9 . 5 4 4 6 • F a x : 1 8 0 0 8 7 6 . 7 4 5 4
sinks
& faucets
www.richelieu.com
19
Version : 2009
| Tools |
Electrical and Air Tools
Section 17A
Heavy-duty 3/8” 12V cordless compact drill/driver kit
• Compact size: fits into the tightest conditions lightweight design (3.9 lbs.) minimizes user fatigue high performance motor
delivers 350 in,-lbs of maximum torque
description
cordless drill
chuck
3/8"
unit
dc727ka
Heavy-duty 1/4” 7.2V cordless two-position screwdriver kit
• 80 in-lbs. of maximum torque output provides for a superior power to weight ratio in a variety of fastening applications
adjustable two-position handle allows for operation as both in-line and postor-grip variable speed and reversing trigger switch
provides 0-500 rpm
description
cordless screwdriver
chuck
1/4"
unit
dw920k2
Heavy-duty 10” compound miter saw
• 15.0 amp motor, 5,000 rpm provides extended power and durability stainless steel detent plate with 11 positive stops delivers
repeatable accuracy and worksite durability
description
electrical miter saw
blade size
10"
unit
dw703
Heavy-duty 12” double bevel compound miter saw
• 15.0 amp, 4,000 rpm motor provides extended opwer and durability stainless steel detent plate with 11 positive stops delivers
repeatable accuracy and worksite durability
description
electrical miter saw
blade size
12"
unit
dw706
Version : 2009
Page 17A16
www.richelieu.com
Te l : 1 8 0 0 6 1 9 . 5 4 4 6 • F a x : 1 8 0 0 8 7 6 . 7 4 5 4