Tools Unlimited

Transcription

Tools Unlimited

D
Forstner Bits
Bormax®, The New Aggressive . .
Super Forstner, New Design . . . .
Multi-Spur . . . . . . . . . . . . . . . .
Multi-Spur Pipe . . . . . . . . . . . .
D2
D3 - 4
D4
D4
Tenon & Plug Cutters . . . . . . . . . . . . D4
Boring Bits
Carbide Boring Bits . . . . . .
Hinge Boring Bits . . . . . . .
Bormax® Hinge Boring Bits
Plug Cutters . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
CNC Precision Tooling
Brad Point CNC Machine Drills
Carbide Tipped Dowel Drills . .
Carbide Tipped Through
Bore Drills . . . . . . . . . . . . .
Solid Carbide Routing Tools . .
.
.
.
.
.
.
.
.
D5
D5
D5
D6
. . D6
. . D7
. . D7
. . D8 - 11
Router Bits
RouterMax™ Router Bits . . . . . . . D12 - 16
Replacement Bearings . . . . . . . . D16
Wood Boring Bits
Monolock™ Hex Shank Drills
Screw Countersinks . . . . . .
Wood Spade Bits . . . . . . . .
Brad Point Drills . . . . . . . . .
Auger Bits & Extensions . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
D17
D17
D18
D19
D20 - 21
Hammers
Mallets & Hammers . . . . . . . . . . D22
Chisels
Wood Chisels . . . . . . . . . . . . . . . D22
NOMI Chisels . . . . . . . . . . . . . . . D23
Biscuits . . . . . . . . . . . . . . . . . . . . . . D23
Biscuit Joiner Blades
Saw Blades
Reciprocating . . . . . . . . . . . . . . . D24
Jig Saw . . . . . . . . . . . . . . . . . . . D25 - 26
Air Saw . . . . . . . . . . . . . . . . . . . D26
Woodworking
Tools
Hole Saws . . . . . . . . . . . . . . . . . . . . D27 - 30
Bi-Metal
Carbide Tipped
Carbon Steel
Carbide Grit Edge
Rod Saws
Arbors & Accessories
Hacksaws . . . . . . . . . . . . . . . . . . . . D31
Frames
Blades
Circular Saw Blades
Carbide Tipped . . . . . . . . . . . . . . D32
Steel . . . . . . . . . . . . . . . . . . . . . . D33
Portable Band Saw Blades . . . . . . . . D33
Scroll / Fret Saw Blades . . . . . . . . D34 - 35
Saw Frames & Blades
Specialty Saws . . . . . . . . . . . . . . . . D36 - 37
Hand Saws
Blitz Back Saw
Flush Cut Saw
Keyhole & Trim Saws
Bow Saws / Blades
Scrapers . . . . . . . . . . . . . . . . . . . . . D37
Carbide Scrapers
Cabinet Scrapers
Accessories . . . . . . . . . . . . . . . . . . D38
Countersinks
Rotary Rasp / File Set
Gimlets
Drill Routers
Woodworker’s Shop Aids . . . . . . . . D39
Hand Planes . . . . . . . . . . . . . . . . . . D40
Thread Inserts for Wood / Plastics . D41
Dowel & Tenon Centers . . . . . . . . . D41
Wall Displays . . . . . . . . . . . . . . . . . D42
D
THE
THE NEW AGGRESSIVE FORSTNER BIT
Patented Worldwide. Made in Germany.
U.S. Pat. Nos. 5, 312, 207, & 5, 975, 814
Features
Modified cutting
head for more
power due to the
new wave-form
cutting teeth.
• Razor sharp cutting teeth for an excellent finish.
• Side clearance provides tear free accurate holes
in soft and hard woods, panel materials, and plastic
laminated boards.
• Modified cutting head for less friction.
• Unique wave-form cutting teeth requires
less power and works cooler.
Inch
Dimensions
• Lasts longer than regular Forstner bits.
Bormax® Forstner Bits
D
REGULAR SERIES
HOLE
SIZE
SHANK
DIA.
OVERALL
LENGTH
STOCK #
5/8
11/16
3/4
13/16
5/16
5/16
5/16
5/16
3-1/2
3-1/2
3-1/2
3-1/2
FBM64002
FBM64003
FBM64004
FBM64006
7/8
15/16
1
1-1/16
5/16
5/16
5/16
5/16
3-1/2
3-1/2
3-1/2
3-1/2
FBM64008
FBM64009
FBM64010
FBM64012
1-1/8
1-3/16
1-1/4
1-5/16
5/16
5/16
3/8
3/8
3-1/2
3-1/2
3-1/2
3-1/2
FBM64013
FBM64015
FBM64016
FBM64017
1-3/8
35mm
1-1/2
40mm
1-5/8
3/8
3/8
3/8
3/8
3/8
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
FBM64018
FBM64019
FBM64020
FBM64021
FBM64022
1-3/4
1-7/8
2
2-1/8
2-1/4
3/8
3/8
3/8
3/8
3/8
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
FBM64023
FBM64024
FBM64026
FBM64027
FBM64028
• 1 per pack
Inch
Dimensions
LONG SERIES
HOLE
SIZE
SHANK
DIA.
OVERALL
LENGTH
STOCK #
1
1-1/4
1-1/2
1-3/4
1/2
1/2
1/2
1/2
5-1/4
5-1/2
5-3/4
6
FBM64032
FBM64033
FBM64034
FBM64035
2
2-1/8
2-1/4
2-3/8
1/2
1/2
1/2
1/2
6
6
6-1/8
6-1/8
FBM64036
FBM64037
FBM64038
FBM64039
2-1/2
3
3-1/2
4
1/2
1/2
5/8
5/8
6-1/4
6-1/4
6-1/4
6-1/4
FBM64040
FBM64041
FBM64042
FBM64043
# FBM64044
# FBM64030
BORMAX SETS IN FITTED WOODEN BOX
5 pc.
Set contains 1 each of sizes:
5/8", 3/4", 1", 1-1/8" & 1-3/8"
FBM64030
16 pc.
Set contains 1 each of sizes:
1/4", 3/8", 1/2", 5/8", 3/4", 7/8",
1", 1-1/8", 1-1/4", 1-3/8", 1-1/2",
1-5/8", 1-3/4", 1-7/8", 2", 2-1/8"
1/4", 3/8", 1/2" sizes are
Super Forstner bits
FBM64044
• 1 per pack
COUNTER DISPLAY
12 - 5 pc. sets in an
attractive Display Box
D-2
FBM64031
# FBM64031
SUPER FORSTNER BITS
NEW DESIGN
Pat. No. 5312207
Features
Expanded
Offering!
Inch
Dimensions
• Premium quality design.
• Bores precision tear-free holes at any angle.
• New chip groove geometry.
Made in Germany
BARREL
I.D.
SHAFT
DIA.
OVERALL
LENGTH
STOCK #
5/16"
5/16"
3/8"
3/8"
1/2"
1/2"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
5"
9-3/4"
5-1/8"
9-7/8"
5-1/8"
9-7/8"
FB61490
FB61491
FB61492
FB61493
FB61494
FB61495
OAL
SHANK
6.35
7.94
9.53
11.11
3-1/2
3-1/2
3-1/2
3-1/2
1/2
9/16
5/8
11/16
12.70
14.29
15.88
17.46
3/4
13/16
7/8
15/16
MM
FAMAG
ECO PRO
1/4
5/16
3/8
7/16
5/16
5/16
5/16
5/16
FB61450
FB61451
FB61452
FB61453
FB61550
FB61551
FB61552
FB61553
3-1/2
3-1/2
3-1/2
3-1/2
5/16
5/16
5/16
5/16
FB61454
FB61455
FB61456
FB61457
FB61554
FB61555
FB61556
FB61557
19.05
20.64
22.23
23.81
3-1/2
3-1/2
3-1/2
3-1/2
5/16
5/16
5/16
5/16
FB61458
FB61459
FB61460
FB61461
FB61558
FB61559
FB61560
FB61561
1
1-1/16
1-1/8
1-3/16
25.40
26.99
28.58
30.16
3-1/2
3-1/2
3-1/2
3-1/2
5/16
5/16
5/16
3/8
FB61462
FB61463
FB61464
FB61465
FB61562
FB61563
FB61564
FB61565
1-1/4
1-5/16
1-3/8
1-7/16
31.75
33.34
34.93
36.51
3-1/2
3-1/2
3-1/2
3-1/2
3/8
3/8
3/8
3/8
FB61466
FB61467
FB61468
FB61469
FB61566
FB61567
FB61568
FB61569
1-1/2
1-5/8
1-3/4
1-7/8
38.10
41.28
44.45
47.63
3-1/2
3-1/2
3-1/2
3-1/2
3/8
3/8
3/8
3/8
FB61470
FB61472
FB61474
FB61477
FB61570
FB61572
FB61574
FB61577
2
2-1/8
2-1/4
50.80
53.98
57.15
3-1/2
3-1/2
3-1/2
3/8
3/8
3/8
FB61478
FB61479
FB61479A
FB61578
FB61579
FB61579A
• 1 per pack
• 1 per pack
HEX SHANK ADAPTORS
Expanded
Offering!
BARREL
DIM.
SHANK
SIZE
OVERALL
LENGTH
STOCK #
1/4"
5/16"
3/8"
1/4" Hex
1/4" Hex
1/4" Hex
3"
3"
3"
SA1014
SA1015
SA1016
FB61497
• 1 per pack
RECOMMENDED SPEEDS
In using FORSTNER BITS, excessive speed will cause burning.
To avoid this and sustain the temper in the tool,
the following speeds are suggested.
BIT
DIA.
RPM
SOFT WOOD
e.g. (Pine)
HARD WOOD
e.g. (Maple)
1900
1400
1200
600
600
1500
1100
900
450
250
1/4" - 5/8"
3/4" - 1"
1-1/8" - 1-3/8"
1-1/2" - 2-1/8"
2-1/4" - 3-1/8"
FAMAG is made in Germany.
SETS IN WOODEN BOX
DESCRIPTION
STOCK #
FAMAG
ECO PRO
4 pc. Set contains one each:
5/8", 3/4", 7/8" & 1"
FB61497
FB61500
1/4", 3/8", 1/2", 5/8", 3/4", 7/8" & 1"
FB61498
FB61501
all sizes 1/4" - 2-1/8" x 1/8"
FB61499
FB61502
• FAMAG sets are manufactured in Germany.
• ECO PRO sets are made outside the United States to ALFA TOOLS' specifications.
D-3
D
Forstner Bits
EXTENSION SHANKS
STOCK #
HOLE SIZE
INCH
SUPER FORSTNER BITS
MULTI-SPUR FORSTNER BITS
FOR LARGER HOLES
Features
• Drills flat bottom and thru holes.
• Bores clean holes in thin stock, veneers or end grains.
• Makes PILOT HOLES for rabbeting, mortising and grooving.
• Guided by its circular rim, the FORSTNER bit
will cut cleanly without deflection by grain or knots.
HOLE SIZE
SHANK
OVERALL
LENGTH
STOCK #
57.15
60.33
63.50
66.80
1/2"
1/2"
1/2"
1/2"
6-1/4"
6-1/4"
6-1/4"
6-1/4"
FB61480
FB61481
FB61482
FB61483
69.85
73.03
76.20
79.38
1/2"
1/2"
1/2"
1/2"
6-1/4"
6-1/4"
6-1/4"
6-1/4"
FB61484
FB61485
FB61486
FB61487
INCH
MM
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
2-7/8
3
3-1/8
• 1 per pack
D
MULTI-SPUR PIPE BITS
SPECIALLY FOR BORING HOLES FOR PIPES
7/16" ROUTINE SHANK WITH 3 FLATS
Forstner Bits
Features
• Inside cutting plane shaves holes smoothly.
• Each bit includes 2 double-ended,
self-feeding screws and one hex wrench.
• Coarse feed screw for softwoods.
• Fine feed screw for hardwoods.
• Set screw is recessed on shank to allow use of an extension
for applications requiring extra reach.
• Solid one piece construction.
HOLE
APPLICATION
STOCK #
1-3/8"
1-1/2"
1-3/4"
2-1/8"
For 3/4" Pipes
For 1" Pipes
For 1-1/4" Pipes
For 1-1/2" Pipes and
Door Lock Installation
For 2" Pipes
For 3" Pipes
For 4" Pipes
MSB61400
MSB61401
MSB61405
MSB61410
2-9/16"
3-5/8"
4-5/8"
Expanded
Offering!
MSB61415
MSB61416
MSB61417
• 1 per pack
TENON & PLUG CUTTERS
1/2" SHANK
Features
• Heavy duty and smooth cutting makes these tenon and plug cutters so popular.
• Multiple cutting spurs give a clean finish.
• Dowels up to 3" are possible.
• Precision grounded and hardened. Made in Germany.
DESCRIPTION
STOCK #
3/8"
1/2"
5/8"
3/4"
1"
TPC61443
TPC61444
TPC61445
TPC61446
TPC61447
5 PC. SET IN WOODEN CASE
Set contains one each:
3/8", 1/2", 5/8", 3/4", 1"
D-4
• 3/8" - 1", 1 per box.
Set individually boxed
TPC61448
CARBIDE BORING BITS
CARBIDE TIPPED SUPER PRECISION
3-1/2" OAL, 3/8" SHANK
Made in Germany
Carbide
Spur
Carbide
Center Cutter
Two diamond ground spurs and one central
cutting edge cut effortlessly through hard,
soft and knotted wood, laminates, fiberboard and chipboard. Short centering point
ensures accurate, cylindrical holes. Ideal for
window installers, carpenters and joiners.
Works extremely well in abrasive materials.
5 PC. SET IN WOODEN CASE
STOCK #
Set contains one each:
15, 20, 25, 30, 35 mm
FBT76545
STOCK #
HOLE
DIA. (mm)
STOCK #
8
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
FBT76501
FBT76502
FBT76503
FBT76504
FBT76505
FBT76506
FBT76507
FBT76508
FBT76509
FBT76510
FBT76511
FBT76512
FBT76513
FBT76514
FBT76515
FBT76516
FBT76517
FBT76518
FBT76519
28
29
30
31
32
33
34
35
36
37
38
39
40
42
44
45
46
48
50
FBT76520
FBT76521
FBT76522
FBT76523
FBT76524
FBT76525
FBT76526
FBT76527
FBT76528
FBT76529
FBT76530
FBT76531
FBT76532
FBT76534
FBT76536
FBT76537
FBT76538
FBT76540
FBT76541
D
Boring Bits
DESCRIPTION
HOLE
DIA. (mm)
• 1 per pack
• 1 per pack
HINGE BORING BITS
AVAILABLE IN ALLOY STEEL AS WELL AS CARBIDE TIPPED
Features
• For boring clean, accurate holes in all types of wood, composites and boards.
• Ideal for installing European style hinges. Made in Germany.
5/16" SHANK, 2-1/4" OAL
SIZE, MM
25
26
30
35
ALLOY
STEEL
Alloy
Alloy
Alloy
Alloy
25
26
30
35
40
CARBIDE
TIPPED
TYPE
STOCK #
Steel
Steel
Steel
Steel
HB61421
HB61422
HB61423
HB61424
Carbide Tipped
Carbide Tipped
Carbide Tipped
Carbide Tipped
Carbide Tipped
HB61431
HB61432
HB61433
HB61434
HB61436
• 1 per pack
HINGE BORING BITS
Features
• All the Bormax features for clean, precision boring.
• Ideal for installing European style hinges.
• Excellent tool life. Made in Germany.
HOLE
SIZE, MM
SHANK
DIA.
OVERALL
LENGTH
STOCK #
26
35
40
3/8"
3/8"
3/8"
2-1/2"
2-1/2"
2-1/2"
FBM64050
FBM64051
FBM64052
• 1 per pack
D-5
BRAD POINT CNC MACHINE DRILLS
HIGH SPEED STEEL
For high performance CNC wood drilling
Features
• Parabolic flute, fully ground, straw gold finish, High Speed Steel
drills for use in CNC and production machining.
• Parabolic flute ejects chips quickly.
• Available in both Right Hand and Left Hand spiral.
• Precision cutting spurs enable clean, splinter-free holes.
• Center point permits premium targeting.
• Use on all types of wood.
R.H.
L.H.
SIZE
INCH
1/8
5/32
3/16
7/32
1/4
9/32
5/16
11/32
3/8
7/16
1/2
Brad Point CNC Drills
D
SIZE
MM
3,18
3,97
4,76
5,56
6,35
7,14
7,94
8,73
9,53
11,11
12,70
SHANK
DIA. MM
3,18
3,97
4,76
5,56
6,35
7,14
7,94
8,73
9,53
11,11
12,70
FL
MM
OAL
MM
36
43
52
57
63
69
75
81
81
94
101
STOCK #
RIGHT HAND
65
75
86
92
101
109
115
125
125
140
151
CNCD50105R
CNCD50107R
CNCD50109R
CNCD50111R
CNCD50113R
CNCD50115R
CNCD50117R
CNCD50119R
CNCD50121R
CNCD50125R
CNCD50129R
in fitted wooden case
1 each, sizes: 1/8", 3/16", 1/4", 5/16", 3/8"
CNCD50140R
5 PC. SET
7 PC. SET
in steel index
1 each, sizes: 1/8", 3/16", 1/4", 5/16",
3/8", 7/16", 1/2"
CNCD50141R
10 PC. SET
1 each, sizes: 1/8", 5/32", 3/16", 7/32",
1/4", 9/32, 5/16", 3/8", 7/16", 1/2"
CNCD50142R
SHANK
DIA. MM
FL
MM
OAL
MM
RIGHT HAND
LEFT HAND
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
11.0
11.5
12.0
13.0
14.0
15.0
16.0
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
11.0
11.5
12.0
13.0
13.0
13.0
13.0
33
39
43
47
52
57
57
63
69
69
75
75
81
81
87
87
94
94
101
101
108
114
120
60
70
75
80
85
92
92
100
108
108
115
115
125
125
130
130
140
140
150
150
160
168
176
PMD4030R
PMD4035R
PMD4040R
PMD4045R
PMD4050R
PMD4055R
PMD4060R
PMD4065R
PMD4070R
PMD4075R
PMD4080R
PMD4085R
PMD4090R
PMD4095R
PMD4100R
PMD4105R
PMD4110R
PMD4115R
PMD4120R
PMD4130R
PMD4140R
PMD4150R
PMD4160R
PMD4030L
–
PMD4040L
–
PMD4050L
–
PMD4060L
–
PMD4070L
–
PMD4080L
–
PMD4090L
–
PMD4100L
–
PMD4110L
–
–
–
–
–
–
PMD4505R
–
PMD4510R
–
5 PC. RH SET
• 1/8" to 5/16, 12 per envelope
11/32 to 1/2", 6 per envelope
9/16, 5/8, 1 per tube
• Set individually boxed
1 each, sizes: 5, 6, 8, 10, 12 mm
10 PC. RH SET
1 each, sizes: 3, 4, 5, 6, 8,
10, 12, 13, 14, 16 mm
CNCD50141R
PMD4510R
• 3.0 to 10.0, 12 per envelope
10.5 to 13.0, 6 per envelope
14.0 to 16.0, 1 per tube
• Set individually boxed
PLUG CUTTERS
Four blade cutter gives smooth
chamfered plug
PLUG CUTTER
D-6
STOCK #
SIZE
MM
SHANK
STOCK #
1/2"
1/2"
1/2"
3/8"
3/8"
3/8"
PC61430
PC61432
PC61434
3/4"
3/4"
3/4"
3/4"
3/8"
1/2"
1/2"
1/2"
PC61436
PC61438
PC61440
PC61442
DIA.
LENGTH
3/8"
7/16"
1/2"
5/8"
3/4"
7/8"
1"
• 1 per pack
CARBIDE TIPPED DOWEL DRILLS
Features
• For drilling tear-free and accurate holes in solid wood,
panel material, and plastic laminate boards.
• Centering tip, 2 cutting edges, 2 spurs. Cylindrical shank
with flat and length adjusting screw.
• High cutting quality achieved by negatively ground spurs.
• Spiral flute coated for reduced friction and better chip flow.
Color Code: Black - R. H. Cutting
SIZE
DIA.
Orange - L. H. Cutting
STOCK #
FL
MM
OAL
MM
RIGHT HAND
LEFT HAND
5 mm
6 mm
1/4"
7 mm
10
10
10
10
x
x
x
x
20
20
20
20
30
30
30
30
57.5
57.5
57.5
57.5
DD74401R
DD74402R
DD74403R
DD74404R
DD74401L
DD74402L
DD74403L
DD74404L
8 mm
9 mm
3/8"
10 mm
10
10
10
10
x
x
x
x
20
20
20
20
30
30
30
30
57.5
57.5
57.5
57.5
DD74405R
DD74406R
DD74407R
DD74408R
DD74405L
DD74406L
DD74407L
DD74408L
12 mm
1/2"
14 mm
15 mm
10
10
10
10
x
x
x
x
20
20
20
20
30
30
30
30
57.5
57.5
57.5
57.5
DD74409R
DD74410R
DD74411R
DD74412R
DD74409L
DD74410L
DD74411L
DD74412L
5 mm
1/4"
8 mm
10 mm
10
10
10
10
x
x
x
x
20
20
20
20
45
45
45
45
70
70
70
70
DD74413R
DD74414R
DD74415R
DD74416R
DD74413L
DD74414L
DD74415L
DD74416L
5 mm
6 mm
10 x 27
10 x 27
27
27
57.5
57.5
DD74417R
DD74420R
DD74417L
DD74420L
5 mm
8 mm
10 x 30
10 x 30
35
35
70
70
DD74418R
DD74419R
DD74418L
DD74419L
D
Carbide Dowel / Through Bore Drills
SHANK
MM
3 PC. DOWEL DRILL SET
1/4", 3/8", 1/2"
10 x 20
30
57.5
DDS3
—
• 1 per pack
CARBIDE TIPPED THROUGH BORE DRILLS
Features
• 60O V - shaped Tip.
• Flat On Shank with Length Adjustment Screw.
• Flutes Coated for Efficient Chip Ejection.
Color Code: Black - R. H. Cutting
SIZE
DIA.
Orange - L. H. Cutting
STOCK #
SHANK
MM
FL
MM
OAL
MM
R. H.
L. H.
5 mm
6 mm
8 mm
10 mm
10
10
10
10
x
x
x
x
24
24
24
24
27
27
27
27
57.5
57.5
57.5
57.5
TB74421R
TB74422R
TB74423R
TB74424R
TB74421L
TB74422L
TB74423L
TB74424L
5 mm
6 mm
8 mm
10 mm
10
10
10
10
x
x
x
x
24
24
24
24
35
35
35
35
70
70
70
70
TB74425R
TB74426R
TB74427R
TB74428R
TB74425L
TB74426L
TB74427L
TB74428L
5 mm
8 mm
10 x 24
10 x 24
44
44
77
77
TB74429R
TB74430R
TB74429L
TB74430L
• 1 per pack
D-7
SOLID CARBIDE ROUTING TOOLS
FOR WOOD AND PLASTICS
Ideal for CNC applications
SINGLE EDGE
UP/DOWN
COMPRESSION
SPIRAL
Features
• Upcut / downcut design for
fast feed rates and for optimum edge
finish on both sides of laminates.
Usage
• Used on double sided
laminated materials.
• Hardwood and wood composites.
Inch
Dimensions
Carbide Router Tools
Inch
Dimensions
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
3/8
1/2
1/2
1/2
1/2
3/4
1-1/8
1
1-1/8
1-3/8
1-5/8
2
3/8
1/2
1/2
1/2
1/2
3/4
3
3
3
3-1/2
3-1/2
4
RT60120
RT60160
RT60167
RT60170
RT60165
RT60195
D
THREE
EDGE
CHIPBREAKER
Features
• Unique scalloped cutting edge
design for extremely fast routing
or hogging of hardwoods and
wood composites.
Usage
• Plywood, hardwood and
wood composites.
Upcut
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/2
1/2
3/4
3/4
1-1/8
1-5/8
1-5/8
2-1/8
1/2
1/2
3/4
3/4
3-1/2
4
4
5
RT60053
RT60051
RT60073
RT60071
1/2
1/2
3/4
3/4
1-1/8
1-5/8
1-5/8
2-1/8
1/2
1/2
3/4
3/4
3-1/2
4
4
5
RT60054
RT60052
RT60074
RT60072
Downcut
• 1 per tube
DOUBLE EDGE
UP/DOWN
COMPRESSION
SPIRAL
Features
• Upcut / downcut design for
fast feed rates and for optimum edge
finish on both sides of laminates.
Usage
• Used on double sided
laminated materials.
Inch
Dimensions
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/2
1/2
1-1/8
1-5/8
1/2
1/2
3
4
RT60169
RT60172
• 1 per tube
THREE
EDGE
FINISHER
Features
• Designed for perfect balance and
ultra smooth finish over a wide
range of speed.
Usage
• Acrylic finish cutting.
• 1 per tube
Inch
Dimensions
SINGLE EDGE
UP/DOWN
MORTISE
COMPRESSION
SPIRAL
Features
• Upcut / downcut design
for fast feed rates.
• Excellent finish with short upcut to
allow mortise cut with downcut action.
Usage
• Double sided laminates and mortising.
• Hardwood trimming and mortising.
Upcut
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/2
1/2
3/4
3/4
1-1/8
1-5/8
1-5/8
2-1/8
1/2
1/2
3/4
3/4
3-1/2
4
4
5
RT60249
RT60253
RT60269
RT60271
1/2
1/2
3/4
3/4
1-1/8
1-5/8
1-5/8
2-1/8
1/2
1/2
3/4
3/4
3-1/2
4
4
5
RT60250
RT60254
RT60270
RT60272
Downcut
Inch
Dimensions
CUTTER
DIA.
(CED)
FLUTE
LENGTH
(CEL)
UPCUT
FLUTE
LENGTH
SHANK
DIA.
OAL
STOCK #
3/8
1/2
7/8
7/8
0.188
0.200
3/8
1/2
3
3
RT60121
RT60161
• 1 per tube
D-8
• 1 per tube
TWO EDGE
CHIPBREAKER/
FINISHER
Inch
Dimensions
Features
• Faster feed rates than a
conventional two flute.
• Extra smooth finish.
Usage
• Hardwoods & wood composites.
• Plywood.
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/2
3/4
1-5/8
2-1/8
1/2
3/4
3-1/2
4
RT60313
RT60325
1/2
3/4
1-5/8
2-1/8
1/2
3/4
3-1/2
4
RT60314
RT60326
Downcut
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
5/16
3/8
3/8
7/16
1/2
1/2
3/4
1-1/8
1-1/8
1-1/4
1
1-1/8
1-5/8
1-5/8
5/16
3/8
3/8
1/2
1/2
1/2
3/4
3
3
3
3
3
3-1/2
4
RT56300
RT56320
RT56325
RT56340
RT56360
RT56365
RT56390
D
• 1 per tube
• 1 per tube
Features
• For additional balance at fast
feed rates.
• Extra smooth finish.
Usage
• Hardwoods and wood composites.
• Plywood.
SINGLE EDGE
STRAIGHT
Features
• For the fast free cutting of O flute
geometry.
• Designed specifically to rout softer,
ductile plastics.
Usage
• Wood composites and soft plastics.
• Other composite materials.
THREE EDGE
CHIPBREAKER/
FINISHER
Inch
Dimensions
Inch
Dimensions
Upcut
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/2
1/2
3/4
3/4
1-1/8
1-5/8
1-5/8
2-1/4
1/2
1/2
3/4
3/4
3
3-1/2
4
4
RT60351
RT60353
RT60371
RT60373
1/2
1/2
3/4
3/4
3
3-1/2
4
5
RT60350
RT60352
RT60370
RT60372
Downcut
1-1/8
1-5/8
1-5/8
2-1/4
• 1 per tube
SINGLE EDGE
STRAIGHT
WOOD ROUT
Features
• V flute geometry.
• Single edge provides fast free cutting
with optimum cutter life.
Usage
• Natural wood and wood composites.
• Abrasive plastics.
Inch
Dimensions
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/8
3/16
1/4
1/2
3/4
7/8
1/4
1/4
1/4
2
2
2-1/2
RT61240
RT61260
RT61280
• 1 per tube
Features
• Double edge wood routs in
straight flute configuration with
optimum cutter life.
• Provide superior finish in a
variety of materials.
Usage
• Wood and wood composites.
• Abrasive plastics and composites.
Inch
Dimensions
Upcut
CUTTER DIA.
(CED)
1/2
1/2
3/4
3/4
DOUBLE EDGE
STRAIGHT
WOOD ROUT
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/8
1/8
3/16
3/16
1/4
1/4
1/4
1/4
3/8
1/2
1/2
1/2
5/8
5/8
3/4
3/4
3/4
3/4
7/8
1
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
1/2
2
2
2
2
2-1/2
2-1/2
3-1/4
3-1/4
2-1/2
3
RT61042
RT61042L
RT61062
RT61062L
RT61082
RT61082L
RT61083
RT61083L
RT61122
RT61162
L = Left rotation tool
• 1 per tube
DOUBLE EDGE
STRAIGHT
Features
• Designed specifically to rout harder,
more rigid plastics.
Usage
• Wood composites, thin laminates
and rigid plastics.
• Other composite materials.
Inch
Dimensions
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/8
3/16
3/16
1/4
1/4
3/8
1/2
1/4
5/8
5/8
3/4
3/4
7/8
1
1/4
1/4
1/4
1/4
1/4
3/8
1/2
2
2
2
2-1/2
2-1/2
2-1/2
3
RT56041
RT56062
RT56062L
RT56082
RT56082L
RT56122
RT56162
• 1 per tube
D-9
DOUBLE EDGE
UPCUT
SPIRAL
Features
• Designed as a general purpose
spiral, they are used when upcut
chip flow is preferred.
Usage
• Wood, aluminum, non-ferrous and
abrasive materials.
Inch
Dimensions
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/4
1/4
3/4
3/4
1/4
1/4
2-1/2
2-1/2
RT52080
RT52080L
D
DOUBLE EDGE
UPCUT
SPIRAL
Features
• Designed for abrasive materials,
often used in slotting or blind
routing situations.
Usage
• Hard or abrasive materials in
wood or wood composite.
• Aluminum.
Inch
Dimensions
CUTTER DIA.
(CED)
• 1 per tube
SINGLE EDGE
UPCUT
SPIRAL
Features
• To cut acrylic with a smooth finish
and upward chip flow.
• For fast feed rates through more
rigid plastics.
Usage
• Acrylic, rigid plastics.
Inch
Dimensions
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/4
3/8
3/4
1
1/4
3/8
2-1/2
3
RT52624
RT52638
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
13/16
7/8
1/4
1/4
1/4
3/8
3/8
2
2
2-1/2
2-1/2
2-1/2
RT63040
RT63060
RT63080
RT63100
RT63120
• 1 per tube
DOUBLE EDGE
UPCUT SPIRAL
WOOD ROUT
Features
• These double edge tools are
designed for routing wood and
wood composites where upward
chip removal, tool rigidity, long life
and high quality finish is desired.
Usage
• Plastics.
• 1 per tube
Inch
Dimensions
SINGLE EDGE
DOWNCUT
SPIRAL
Features
• For cutting through abrasive
materials at extremely fast feed
rates when small diameters are
called for.
Usage
• Hard or abrasive materials.
• Aluminum.
Inch
Dimensions
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/8
1/4
1/2
3/4
1/4
1/4
2
2-1/2
RT62040
RT62080
• 1 per tube
DOUBLE EDGE
DOWNCUT
SPIRAL
Features
• Designed to cut acrylic with a
smooth finish and downward
chip flow.
Usage
• Acrylic, rigid plastics,
some polycarbonates.
Inch
Dimensions
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/4
3/8
3/4
1
1/4
3/8
2-1/2
3
RT57625
RT57637
• 1 per tube
D-10
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/8
5/32
3/16
7/32
1/4
1/4(S)
1/4
9/32
5/16
3/8
3/8(S)
3/8
7/16
1/2(S)
1/2
1/2
1/2(S)
1/2
17/32
5/8
5/8
3/4
3/4
1/2
5/8
3/4
3/4
7/8
7/8
1
1
1-1/8
1-1/8
1-1/8
1-1/4
1
1-1/8
1-1/4
1-5/8
1-5/8
2-1/8
1-1/8
1-5/8
2-1/8
1-5/8
2-1/8
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3-1/2
3-1/2
3-1/2
4
3
3-1/2
4
4
4
RT52240
RT52250
RT52260
RT52270
RT52280
RT52281
RT52285
RT52290
RT52300
RT52320
RT52321
RT52325
RT52340
RT52361
RT52362
RT52365
RT52366
RT52367
RT52370
RT52380
RT52385
RT52390
RT52395
• 1 per tube
(S) = For soft woods
SINGLE EDGE
UPCUT SPIRAL
WOOD ROUT
Features
• These single edge spiral tools are designed
for routing wood composites when aggressive
upward chip removal is necessary.
• Tool rigidity, long life and high quality finish
are also characteristic of these tools.
Usage
• Plastics.
Inch
Dimensions
Inch
Dimensions
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/8
3/16
1/4
1/4
5/16
3/8
1/2
1/2
3/4
7/8
1
1-1/8
1-1/8
1-1/8
1/4
1/4
1/4
1/4
5/16
3/8
1/2
2
2
2-1/2
2-1/2
3
3
3
RT63240
RT63260
RT63280
RT63285
RT63300
RT63320
RT63360
Features
• These single edge spiral O flute
tools provide a smooth finish
with downward chip removal.
SINGLE EDGE
DOWNCUT
SPIRAL O
FLUTE
For Hard Plastics
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/4
3/4
1/4
2-1/2
RT62725
3
RT62726
For Soft Plastics
1/4
1-1/4
1/4
• 1 per tube
D
• 1 per tube
Features
• These single edge tools are designed for routing
wood and wood composites where aggressive
downward chip removal is necessary.
• Tool rigidity, long life and high quality finish are
also characteristics of these tools.
• Ideal for CNC or manual applications.
Usage
• Plastics.
Inch
Dimensions
Inch
Dimensions
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/8
3/16
1/4
1/4
5/16
3/8
1/2
1/2
3/4
7/8
1
1-1/8
1-1/8
1-1/8
1/4
1/4
1/4
1/4
5/16
3/8
1/2
2
2
2-1/2
2-1/2
3
3
3
RT62240
RT62260
RT62280
RT62285
RT62300
RT62320
RT62360
• 1 per tube
SINGLE EDGE
UPCUT
SPIRAL O FLUTE
Inch
Dimensions
CUTTER DIA.
(CED)
1/16
1/8
3/16
1/4
1/4
Features
• These single edge spiral O flute
tools provide a smooth finish with
upward chip removal.
For Hard Plastics
FLUTE LENGTH
(CEL)
1/4
1/2
5/8
3/4
1-1/4
SHANK
DIA.
1/4
1/4
1/4
1/4
1/4
OAL
2
2
2
2-1/2
3
STOCK #
RT63700
RT63712
RT63718
RT63725
RT63726
For Soft Plastics
1/16
1/8
3/16
1/4
1/4
• 1 per tube
Features
• These double edge tools are
designed for routing wood and wood
composites where downward chip
removal, tool rigidity, long life, and
high quality finish is desired.
Usage
• Plastics.
DOUBLE
EDGE
DOWNCUT
SPIRAL
WOOD ROUT
1/4
1/2
5/8
3/4
1-1/4
1/4
1/4
1/4
1/4
1/4
2
2
2
2-1/2
3
RT63750
RT63762
RT63768
RT63775
RT63776
CUTTER DIA.
(CED)
FLUTE LENGTH
(CEL)
SHANK
DIA.
OAL
STOCK #
1/8
1/2
1/4
2
RT57240
5/32
5/8
1/4
2
RT57250
3/16
3/4
1/4
2
RT57260
7/32
3/4
1/4
2-1/2
RT57270
1/4
7/8
1/4
2-1/2
RT57280
1/4(S)
7/8
1/4
2-1/2
RT57281
1/4
1
1/4
2-1/2
RT57285
9/32
1
5/16
2-1/2
RT57290
5/16
1-1/8
5/16
3
RT57300
3/8
1-1/8
3/8
3
RT57320
3/8(S)
1-1/8
3/8
3
RT57321
3/8
1-1/4
3/8
3
RT57325
7/16
1
1/2
3
RT57340
1/2(S)
1-1/8
1/2
3
RT57361
1/2
1-1/4
1/2
3-1/2
RT57362
1/2
1-5/8
1/2
3-1/2
RT57365
1/2(S)
1-5/8
1/2
3-1/2
RT57366
1/2
2-1/8
1/2
4
RT57367
17/32
1-1/8
1/2
3
RT57370
5/8
1-5/8
5/8
3-1/2
RT57380
5/8
2-1/8
5/8
4
RT57385
3/4
1-5/8
3/4
4
RT57390
3/4
2-1/8
3/4
4
RT57395
• 1 per tube
(S) = For soft woods
D-11
SINGLE EDGE
DOWNCUT
SPIRAL
WOOD ROUT
ROUTER BITS
CARBIDE TIPPED
Premium Quality
Ball Bearing
Router Bits are
designed and built for
professionals. The finest
grade -K20- tungsten carbide
router tips are induction silver
brazed, and are diamond
lapped for perfect cutting
edge. The anti-kickback body
design and a high visibility
teflon coating enables
smoother and faster
operations.
Expanded
Offering!
Teflon Coated
High Visibility Color
D
Router Bits
High Carbon Steel Shank
EDGE FORMING BITS
ROUNDING OVER BITS
Inch
Dimensions
Rounding Over Bits with Bearing Guides –
quarter rounds, softens edges
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
RADIUS
SHANK
DIA.
STOCK #
5/8
3/4
7/8
1
3/8
3/8
3/8
1/2
2
2
2
2
1/16
1/8
3/16
1/4
1/4
1/4
1/4
1/4
RB75062
RB75064
RB75066
RB75068
1-1/8
1-1/4
1-1/2
1/2
5/8
3/4
2-1/8
2-1/4
2-3/8
5/16
3/8
1/2
1/4
1/4
1/4
RB75070
RB75072
RB75074
3/4
7/8
1
1-1/8
3/8
3/8
1/2
1/2
2-1/4
2-1/4
2-1/4
2-3/8
1/8
3/16
1/4
5/16
1/2
1/2
1/2
1/2
RB75076
RB75078
RB75080
RB75082
1-1/4
1-1/2
1-3/4
2
5/8
3/4
7/8
1
2-1/2
2-5/8
2-3/4
2-7/8
3/8
1/2
5/8
3/4
1/2
1/2
1/2
1/2
RB75084
RB75086
RB75088
RB75090
The most popular edge
forming bit. These shear
angle bits create a perfect
radius edge by slicing
through the wood like a
knife to reduce or eliminate
wood fiber tear out.
• 1 per vinyl pouch
BEADING BITS
Inch
Dimensions
Two Flutes with Bearing Guide –
drawer fronts, mouldings, chair rails
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
RADIUS
SHANK
DIA.
STOCK #
3/4
7/8
1
1-1/4
1-1/2
3/8
3/8
1/2
5/8
3/4
2
2
2
2-1/8
2-3/8
1/8
3/16
1/4
5/16
1/2
1/4
1/4
1/4
1/4
1/4
RB75092
RB75094
RB75096
RB75098
RB75100
D-12
Very popular for furniture
and mill work. These bits
create a round edge with
either single step or the
traditional double
stepped bead.
ROUTER BITS
CARBIDE TIPPED
EDGE FORMING BITS
Expanded
Offering!
COVE BITS
Two Flutes with Bearing Guide –
mouldings and furniture accents
Inch
Dimensions
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
RADIUS
SHANK
DIA.
STOCK #
1
1-1/4
1-1/2
1-1/2
1/2
5/8
5/8
5/8
2
2-1/8
2-1/4
2-1/2
1/4
3/8
1/2
1/2
1/4
1/4
1/4
1/2
RB75102
RB75104
RB75106
RB75108
The up-shear angle on
these bits enable making
decorative edgings on case
goods, mouldings, and other
projects very smoothly and
efficiently.
CLASSICAL BITS
Inch
Dimensions
With Bearing Guide – creates beautiful
decorative edging
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
CUTTING
WIDTH
SHANK
DIA.
STOCK #
1-1/4
1-1/2
1-1/2
5/8
3/4
3/4
2-1/8
2-1/4
2-1/2
3/8
1/2
1/2
1/4
1/4
1/2
RB75110
RB75112
RB75114
This classical design
combines a bead with a
cove. For use on 5/8" and
3/4" materials.
D
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
RADIUS
SHANK
DIA.
STOCK #
1-1/8
1-1/2
1-1/8
1-1/2
1/2
3/4
1/2
3/4
2-1/16
2-1/4
2-1/4
2-1/2
5/32
1/4
5/32
1/4
1/4
1/4
1/2
1/2
RB75116
RB75118
RB75120
RB75122
This edge forming bit adds
style to any work. By
changing the protrusion
from the router, an ogee
or cove design can be
achieved. A popular and
versatile bit for beautiful
edge work.
Router Bits
ROMAN OGEE
Two Flutes with Bearing Guide – decorative edging
for millwork and furniture
BULL NOSE BITS
Inch
Dimensions
Beading and rounding edges on mouldings,
frames and countertops
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
RADIUS
SHANK
DIA.
STOCK #
7/8
1
1
1-3/8
11/16
13/16
5/8
1-1/16
1-7/8
2
2-1/8
2-1/2
3/8
1/2
3/8
3/4
1/4
1/4
1/2
1/2
RB75124
RB75126
RB75128
RB75130
This bit will create a full
bead or a full round edge.
Excellent for casement
and staircase work.
CHAMFER BITS
Inch
Dimensions
Two Flutes with Bearing Guide – for beveling
and chamfering – 45O
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
BEVEL
LENGTH
SHANK
DIA.
STOCK #
1
1-3/8
7/16
5/8
2
2-1/4
1/4
3/8
1/4
1/4
RB75132
RB75134
This full shoulder chamfer bit
design allows you to make
both the standard cut as well
as a cut with a bead. The
shear angled cutting edge
gives a very clean cut.
RABBETING BITS
With Bearing Guide – for windows
and picture frames
Inch
Dimensions
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
SHANK
DIA.
STOCK #
1-1/4
1-1/4
1-1/4
1/4
3/8
1/2
2
2-1/8
2-1/8
1/4
1/4
1/4
RB75136
RB75138
RB75140
This bit produces super clean
cuts on both surfaces of the
rabbet. Ideal for inserting
glass, wood, or plastic panels
into wood frame viz: windows,
cabinets and picture frames.
D-13
ROUTER BITS
CARBIDE TIPPED
STRAIGHT BITS
Expanded
Offering!
STRAIGHT BITS
Inch
Dimensions
Plunge Cutting – Two Flutes
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
SHANK
DIA.
STOCK #
1/4
3/8
1/2
3/4
3/4
3/4
3/4
3/4
2
2
2
2
1/4
1/4
1/4
1/4
RB75001
RB75003
RB75005
RB75007
1/4
3/8
1/2
5/8
3/4
1
3/4
3/4
1-3/16
1-1/8
1-1/8
1-1/8
2-1/2
2-1/2
3
2-5/8
2-5/8
2-5/8
1/2
1/2
1/2
1/2
1/2
1/2
RB75008
RB75009
RB75011
RB75013
RB75015
RB75017
This router is mostly used
for cutting dadoes, rabbets,
circles and general purpose
work. Cuts all types of wood
and wood composites. End
bit relief permits fast plunge
cutting.
Pattern Cutting Bits – for use with template
Router Bits
D
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
SHANK
DIA.
STOCK #
1/2
3/4
3/4
1-1/8
3/4
3/4
1
1-1/8
2-1/4
2-1/4
2-1/2
3
1/4
1/4
1/2
1/2
RB75020
RB75022
RB75029
RB75026
Used for pattern cutting
when pattern is mounted on
top of work piece. Excellent
for part duplication and
lettering. End of bit relief
allows for fast plunge cutting.
GROOVE FORMING BITS
90° V-GROOVE BITS
Inch
Dimensions
Pattern Cutting Bits – for use with template,
with bearing guide
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
1/2
1/2
2
ANGLE
SHANK
DIA.
STOCK #
45°
1/4
RB75030
Excellent for lettering on
signs and decorative
grooving on doors and
cabinets. Up-shear angle
provides excellent chip
clearance.
DOVETAIL BITS
Groove Forming Bits –
cabinet drawers and furniture
Inch
Dimensions
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
ANGLE
SHANK
DIA.
STOCK #
3/8
1/2
1/2
3/8
1/2
1/2
1-3/4
1-3/4
2-1/4
8°
14°
14°
1/4
1/4
1/2
RB75032
RB75034
RB75036
Pattern Cutting Bits - for use with template, with bearing guide
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
ANGLE
SHANK
DIA.
STOCK #
1/2
1/2
2-1/4
14°
1/4
RB75038
Used for cutting when a
pattern is mounted on top
of work piece. Shear angle
provides a good chip
clearance.
CORE BOX BITS
Inch
Dimensions
Groove Forming Bits – veining and fluting,
excellent chip removal, smooth finish.
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
RADIUS
SHANK
DIA.
STOCK #
1/4
3/8
1/2
3/8
7/16
9/16
1-3/4
1-3/4
1-7/8
1/8
3/16
1/4
1/4
1/4
1/4
RB75040
RB75042
RB75044
D-14
Designed with an upshear
for smooth cutting and
efficient chip removal. These
bits produce a perfect radius
groove for decorative work
on cabinet doors and other
projects.
ROUTER BITS
CARBIDE TIPPED
SPECIALTY BITS
Expanded
Offering!
T-SLOT BITS
Inch
Dimensions
Specialty Bits – create slot wall panels
for displays
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
T-WIDTH
SHANK
DIA.
STOCK #
1
7/8
2-5/16
3/8
1/2
RB75046
This bit creates slots on
wall paneling for commercial
display hanging.
5/32" SLOT CUTTER BITS
Four Flutes with Bearing Guide –
for biscuit joining
Inch
Dimensions
CUTTING
LENGTH
OVERALL
LENGTH
CUTTING
DEPTH
SHANK
DIA.
STOCK #
2
5/32
2-1/4
9/16
1/4
RB75048
Inch
Dimensions
PANEL BITS
Create cutouts in floors, ceilings and panels
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
NO. OF
FLUTES
SHANK
DIA.
STOCK #
1/2
1-1/8
3-1/8
2
1/2
RB75050
Used in the construction
trade to rout cutouts in floors,
ceilings and panels for
electrical boxes and
windows.
GLUE JOINT BITS
Specialty Bit – for table tops
and panels 3/4" to 1"
Inch
Dimensions
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
SHANK
DIA.
STOCK #
1
1-1/8
1-3/16
1-1/4
2-5/8
2-5/8
1/4
1/2
RB75052
RB75054
These bits are used for
joining 3/4" to 1" stock to
make wide panels for table
tops and other projects. Align
the bit to the center of the
stock and simply reverse
board for a perfect glue joint.
Inch
Dimensions
LAMINATE FLUSH TRIMMING BITS
Two flutes with bearing guide
CUTTER
DIA.
CUTTING
LENGTH
OVERALL
LENGTH
SHANK
DIA.
STOCK #
3/8
1/2
1/2
5/8
1-3/16
1-3/16
1-3/16
1-3/16
2-3/4
2-3/4
3-1/4
3
1/4
1/4
1/2
1/2
RB75056
RB75058
RB75059
RB75060
Excellent for smooth
trimming of wood, wood
composites, laminates or
man made materials such
as a CORIAN®.
D-15
D
Router Bits
CUTTER
DIA.
This bit is designed to
produce a precision slot
for “T” mouldings, spine
joints and biscuit joining #10, #20 biscuits. 4 cutting
edges provide a super
smooth and accurate slot.
ROUTER BIT SETS
CARBIDE TIPPED FOR PROFESSIONAL USE
IN FITTED WOODEN CASES
4 PC. ROUNDOVER ROUTER BIT SET
DESCRIPTION
Set includes four of the most
popular sizes of roundover bits:
Radius sizes: 1/8", 1/4", 3/8" and 1/2"
SHANK DIA. STOCK #
1/4"
1/2"
RB75165
RB75166
• Individually boxed
5 PC. EDGE FORMING ROUTER BIT SET
DESCRIPTION
D
SHANK DIA. STOCK #
Set includes five
versatile edge forming bits:
Router Bits
1/2" Flush Trim 3/8" Rabbet
3/8" Roundover 5/32" Roman Ogee
45O Chamfer
1/4"
RB75164
15 PC. MULTI-PURPOSE ROUTER BIT SET
DESCRIPTION
SHANK DIA. STOCK #
Comprehensive bit selection
consisting of:
3/8" Flush Trim 3/8" Roundover
1/2" Flush Trim 5/32" Roman Ogee
1/2" Cove
1/4" x 3/4" Straight
90O V-Groove
45O Chamfer
3/8" Rabbet
1/2" x 3/4" Pattern
1/2" Rabbet
1/2" Core
1/2" 14O Dovetail
1/4"
RB75163
REPLACEMENT BEARINGS FOR ROUTER BITS
These high quality router bit bearings stand up to heavy use, and can be used with other manufacturers' bits.
Some bits can use different size bearings. Check applicable size from chart below.
BEARING SIZE
3/8"
1/2"
1/2"
5/8"
3/4"
3/4"
1-1/8"
• 1 per pack
D-16
x
x
x
x
x
x
x
3/16"
3/16"
1/4"
1/4"
1/4"
1/2"
1/2"
STOCK #
RB75151
RB75152
RB75153
RB75154
RB75155
RB75156
RB75157
HEX SHANK DRILLS
Expanded
Offering!
SUPER HIGH SPEED STEEL • RIGHT HAND SPIRAL
• High speed steel quickly penetrates wood, metal and plastic.
• 1/4" Hex shank works in all cordless power screwdrivers as well as
in cordless and conventional drills, and most common chuck adapters.
1/4" HEX SHANK DRILLS
118O POINT & 135O SPLIT POINT
Inch
Dim.
DRILL
DIA.
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
Inch
Dim.
118O REGULAR POINT
FLUTE OVERALL
LENGTH LENGTH
3/4
7/8
1
1-1/16
1-1/4
1-3/8
1-3/8
1-5/8
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
2-7/8
3
3
3-1/8
3-1/4
3-3/8
3-1/2
3-5/8
• Bulk 12 per envelope
STOCK #
BULK
CARDED
DRILL
DIA.
HSD51021
HSD51021A
HSD51022
HSD51024
HSD51025
HSD51026
HSD51027
HSD51028
HSD51029
HSD51030
HSD51031
HSD51032
HSD51033
HSD51021C
HSD51021AC
HSD51022C
HSD51024C
HSD51025C
HSD51026C
HSD51027C
HSD51028C
HSD51029C
HSD51030C
HSD51031C
HSD51032C
HSD51033C
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
• Card 1 per card
135O SPLIT POINT
STOCK #
FLUTE OVERALL
LENGTH LENGTH
3/4
7/8
1
1-1/16
1-1/4
1-3/8
1-3/8
1-5/8
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
2-7/8
3
3
3-1/8
3-1/4
3-3/8
3-1/2
3-5/8
BULK
CARDED
HSD51071
HSD51071A
HSD51072
HSD51072A
HSD51073
HSD51073A
HSD51074
HSD51074A
HSD51075
HSD51075A
HSD51076
HSD51076A
HSD51077
HSD51071C
HSD51071AC
HSD51072C
HSD51072AC
HSD51073C
HSD51073AC
HSD51074C
HSD51074AC
HSD51075C
HSD51075AC
HSD51076C
HSD51076AC
HSD51077C
• Card 1 per card
SET
QTY.
SIZE RANGE
SET
QTY.
STOCK #
SIZE RANGE
ON A HANG-UP CARD
7 Pc.
118O Point set
includes sizes:
1/16", 3/32", 1/8", 5/32",
3/16", 7/32", 1/4"
7 Pc.
135O Split Point set
includes sizes:
1/16", 3/32", 1/8", 5/32",
3/16", 7/32", 1/4"
STOCK #
IN STEEL INDEX
HSD51042
HSD51081
13 Pc.
118O Point set
includes sizes:
1/16" - 1/4" by 64ths
HSD51082
13 Pc.
135O Split Point set
includes sizes:
1/16" - 1/4" by 64ths
HSD51083
SCREW COUNTERSINK TOOL
For predrilling correct woodscrew holes. Taper single flute drill penetrates fast and efficiently. Depth collar ensures correct pilot hole length.
Counter bore permits clean plug hole or flush 82˚ countersink. Complete with hex key.
COMPLETE COUNTERSINK TOOL
Expanded
Offering!
1/4" Hex
Power
Shank
STRAIGHT SHANK
BULK
#5
#6
#7
#8
#9
#10
#12
CSK51055
CSK51056
CSK51057
CSK51058
CSK51059
CSK51060
CSK51062
• Bulk 6 per pack
1/4" HEX POWER SHANK
STOCK #
SCREW
SIZE
STOCK #
CARDED
SCREW
SIZE
BULK
CARDED
CSK51055C
CSK51056C
CSK51057C
CSK51058C
CSK51059C
CSK51060C
CSK51062C
#5
#6
#7
#8
#9
#10
#12
CSK51035
CSK51036
CSK51037
CSK51038
CSK51039
CSK51040
CSK51041
CSK51035C
CSK51036C
CSK51037C
CSK51038C
CSK51039C
CSK51040C
CSK51041C
• Card 1 per card
• Bulk 6 per pack
• Card 1 per card
COUNTERSINK COMPONENTS
1/4" Hex
Power
Shank
Countersink
with
depth collar
TAPER DRILLS
SCREW
SIZE
DRILL
SIZE
STRAIGHT
SHANK
HEX POWER
SHANK
COUNTERSINK
WITH COLLAR
#5
#6
#7
#8
#9
#10
#12
1/8"
9/64"
5/32"
11/64"
3/16"
13/64"
7/32"
CSK51082
CSK51083
CSK51084
CSK51085
CSK51086
CSK51087
CSK51088
HSD51005
HSD51006
HSD51007
HSD51008
HSD51009
HSD51010
HSD51012
CSK51090
CSK51091
CSK51092
CSK51093
CSK51094
CSK51095
CSK51096
Taper Drills: 6 per pack
Countersink: 1 per pack
See page A-72 for
Monolock™ Quick
Change Chuck
Information
D-17
Hex Shank Drills / Screw Countersink Tool
1/4" HEX SHANK DRILL SETS
D
WOOD SPADE BITS
Features
• For all general wood boring performed by
high speed electrical drills, greater
efficiency attained @ 1500-2000 r.p.m.
1/4" HEX SHANK
• Forged heat treated tool steel for long
tool life.
• 1/4" Hex shank fits securely in 3 jaw chuck.
• Available in 6-1/8" and 16" overall length.
STOCK #
DIA.
BULK
WOOD BIT EXTENSIONS
POUCHED
Features
• Adds extra reach to wood boring bit.
• Extension head will follow 5/8" and
larger bits through hole.
• Two set screws secure bit into extension.
• 1/8" hex key included with extension.
6-1/8" OVERALL LENGTH
Wood Spade Bits
D
1/4"
5/16"
3/8"
7/16"
WSB61155
WSB61156
WSB61157
WSB61158
WSB61155P
WSB61156P
WSB61157P
WSB61158P
1/2"
9/16"
5/8"
11/16"
WSB61159
WSB61160
WSB61161
WSB61162
WSB61159P
WSB61160P
WSB61161P
WSB61162P
3/4"
13/16"
7/8"
15/16"
WSB61163
WSB61164
WSB61165
WSB61166
WSB61163P
WSB61164P
WSB61165P
WSB61166P
1"
1-1/8"
1-1/4"
1-3/8"
1-1/2"
WSB61167
WSB61168
WSB61169
WSB61170
WSB61171
WSB61167P
WSB61168P
WSB61169P
WSB61170P
WSB61171P
• Large size markings makes tools easily
identifiable.
• Built-in hole for pulling wires back
through walls, ceilings and floors.
HEX
SHANK
OVERALL
LENGTH
STOCK #
1/4"
1/4"
1/4"
6"
12"
18"
EXT61289
EXT61290
EXT61291
• 1 per pack
The Monolock quick change system provides a wide range
of instant chucking accessories and screwdriving tools.
WOOD SPADE BITS
16" OVERALL LENGTH
1/4"
3/8"
1/2"
5/8"
3/4"
7/8"
1"
1-1/8"
WSB61172
WSB61173
WSB61174
WSB61175
WSB61176
WSB61172P
WSB61173P
WSB61174P
WSB61175P
WSB61176P
WSB61177
WSB61178
WSB61178A
WSB61177P
WSB61178P
WSB61178AP
• Bulk 1/4" to 1", 6 per pack
1-1/8" to 1-1/2", 3 per pack
• Pouch 1 per pouch
With 1/4" Hex Power Shanks
6-1/8" Overall Length
STOCK #
SIZE
See page A-72 for
Monolock™ Quick Change
Chuck Information
BULK
POUCHED
3/8"
1/2"
5/8"
WSB61182
WSB61183
WSB61184
WSB61182P
WSB61183P
WSB61184P
3/4"
7/8"
1"
WSB61185
WSB61186
WSB61187
WSB61185P
WSB61186P
WSB61187P
• Bulk 6 per pack
WOOD SPADE BIT SETS
Packaged in reusable vinyl pouches
DESCRIPTION
WOOD SPADE BIT SETS
With 1/4" Hex Power Shanks
Packaged in reusable vinyl pouches
STOCK #
4 Pc. Set
3/8", 1/2", 5/8", 3/4"
ALL 6-1/8" OAL BITS
Sizes:
DESCRIPTION
WSB61191
6 Pc. Set
6 Pc. Set
Sizes:
3/8", 1/2", 5/8", 3/4", 7/8", 1"
ALL 6-1/8" OAL BITS
STOCK #
Sizes:
WSB61192
3/8", 1/2", 5/8", 3/4, 7/8", 1"
ALL 6-1/8" OAL BITS
WSB61195
WOOD SPADE BIT WALL DISPLAYS
DESCRIPTION
STOCK #
WOOD SPADE BIT WALL DISPLAY
30 Pc. Wall Display
5 ea.: 3/8", 1/2", 5/8", 3/4", 7/8", 1"
ALL 6-1/8" OAL Bits
WSB61193
DESCRIPTION
WSB61194
5 ea.: 3/8", 1/2", 5/8", 3/4, 7/8", 1"
ALL 6-1/8" OAL BITS
30 Pc. Wall Display
18 Pc. Wall Display
3 ea.: 3/8", 1/2", 5/8", 3/4", 7/8", 1"
ALL 16" OAL Bits
D-18
STOCK #
Displays are shown on page D-42
WSB61196
BRAD POINT DRILLS
FOR PRECISION DRILLING IN WOODS, PLASTICS, COMPOSITES
Expanded
Offering!
SUPER HIGH SPEED STEEL
SUPER WEAR RESISTANT ALLOY CV DRILL STEEL
Inch
Dim.
FRACTIONAL SIZES
Inch Dim.
SHANK
DIA.
FLUTE
LENGTH
OAL
1/8
5/32
3/16
7/32
1/4
9/32
5/16
11/32
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1/8
5/32
3/16
7/32
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
1-5/16
1-3/4
2-1/16
2-1/4
2-1/4
2-1/4
2-11/16
2-3/4
3-7/16
3-7/16
4
4-1/4
4-3/4
4-3/4
5
5-1/2
2-3/8
3
3-3/8
3-5/8
3-11/16
3-11/16
4-5/8
4-7/8
5-1/4
5-1/4
5-3/4
6-3/16
7
7-1/2
8-1/4
8-1/2
STOCK #
BPW61103P
BPW61105P
BPW61107P
BPW61108P
BPW61110P
BPW61109P
BPW61111P
BPW61106P
BPW61112P
BPW61113P
BPW61114P
BPW61115P
BPW61117P
BPW61119P
BPW61121P
BPW61123P
1/4
5/16
3/8
3/8
3/8
3/8
1/2
6
6
6
6
6
6
6
10
10
10
10
10
10
10
BPW623073P
BPW623074P
BPW623075P
BPW623076P
BPW623077P
BPW623078P
BPW623079P
LONG LENGTH 12" OAL
3/16
1/4
5/16
3/8
1/2
3/16
1/4
1/4
1/4
1/4
2-1/16
2-1/4
2-11/16
3-7/16
4
12
12
12
12
12
BPW88807P
BPW88810P
BPW88811P
BPW88812P
BPW88814P
Expanded
Offering!
METRIC SIZES
DRILL
SIZE
MM
SHANK
DIA.
MM
FL
MM
OAL
MM
POUCHED
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
20
3
4
5
6
7
8
8
8
8
8
8
10
10
10
10
10
10
33
43
52
57
65
70
70
80
94
101
101
108
114
120
125
130
140
61
75
86
93
104
114
122
127
142
151
151
160
169
178
184
191
205
BPW61141P
BPW61142P
BPW61143P
BPW61144P
BPW61145P
BPW61146P
BPW61147P
BPW61148P
BPW61149P
BPW61150P
BPW61162P
BPW61151P
BPW61152P
BPW61153P
BPW61163P
BPW61164P
BPW61154P
• Drills individually pouched
BPW61137S
Expanded
Offering!
LONG LENGTH 10" OAL
1/4
5/16
3/8
7/16
1/2
9/16
5/8
BPW61137P
POUCHED
STOCK #
BPW61136B
BRAD POINT DRILL SETS
DESCRIPTION
STOCK #
3 pc Set in Vinyl Pouch
Sizes: 3/16", 1/4", 5/16"
BPW61133P
Sizes: 1/4", 5/16", 3/8",
7/16", 1/2"
BPW61135P
Sizes: 1/8", 3/16", 1/4",
5/16", 3/8", 7/16", 1/2"
BPW61137P
7 pc Set in Plastic Case
Sizes: 1/8", 3/16", 1/4",
5/16", 3/8", 7/16", 1/2"
BPW61137S
5 pc Set Carbide Tipped
Drills in Wooden Box
Sizes: 3/16", 1/4", 5/16",
3/8", 1/2"
BPW61136B
7 pc Metric Set in
Vinyl Pouch
Sizes: 4, 5, 6, 7, 8, 10,
12 mm
BPW61155P
DRILL FLUTE
SIZE LENGTH
OAL
STOCK #
1/8
9/64
5/32
11/64
1-5/8
1-3/4
2
2-1/8
2-3/4
2-7/8
3-1/8
3-1/4
BPH62301
BPH62302
BPH62303
BPH62304
3/16
13/64
7/32
15/64
2-5/16
2-7/16
2-1/2
2-5/8
3-1/2
3-5/8
3-3/4
3-7/8
BPH62305
BPH62306
BPH62307
BPH62308
1/4
17/64
9/32
19/64
2-3/4
2-7/8
2-15/16
3-1/16
4
4-1/8
4-1/4
4-3/8
BPH62309
BPH62310
BPH62311
BPH62312
5/16
11/32
3/8
13/32
3-3/16
3-7/16
3-5/8
3-7/8
4-1/2
4-3/4
5
5-1/4
BPH62313
BPH62314
BPH62316
BPH62317
7/16
1/2
4-1/16
4-1/2
5-1/2
6
BPH62320
BPH62324
• Bulk 1/8" to 5/16", 12 per pack
11/32" to 1/2", 6 per pack
S & D DRILLS
1/2" Shank 6" OAL
DRILL
SIZE
STOCK #
9/16"
5/8"
3/4"
7/8"
BPH623030
BPH623034
BPH623042
BPH623050
1"
1-1/16"
1-1/8"
1-3/16"
BPH623058
BPH623060
BPH623061
BPH623062
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
BPH623063
BPH623064
BPH623065
BPH623066
BPH623067
• 1 per tube
CARBIDE TIPPED
BRAD POINT DRILL BITS
Inch Dim.
DRILL SHANK
SIZE
DIA.
3/16
1/4
5/16
3/16
1/4
5/16
FL
OAL
STOCK #
POUCHED
1-3/4 3-3/8 BPW61156P
2-3/4 3-7/8 BPW61157P
3
4-3/4 BPW61158P
DRILL SHANK
SIZE
DIA.
3/8
1/2
7mm
FL
Expanded
Offering!
OAL
STOCK #
POUCHED
3/8
3
4-3/4 BPW61159P
3/8
3-1/2 5-7/8 BPW61160P
6.6mm 50.mm 100mm BPW61161
• 1 per pouch
D-19
D
Brad Point Drills
DRILL
SIZE
JOBBERS LENGTH
WOOD AUGER BITS
SHIP AUGER BITS
HEXAGONAL SHANK
Features
Single Twist, Single cutter.
Machine ground hollows.
Self-feeding screw point.
Deep throat.
Made of premium steel.
Ideal for boring creosoted poles, railroad ties,
bulkheads, and other heavy timber.
• Recommended where
chip clogging is a
problem such as green
wood and creosoted poles.
• Nail Eater.
Cutter
Wood Auger Bits
Inch
Dimensions
STOCK #
BORE
DIA.
HEX
SHANK
FLUTE
LENGTH
OAL
1/2
9/16
5/8
11/16
5/16
5/16
5/16
5/16
6
6
6
6
3/4
13/16
7/8
15/16
5/16
5/16
7/16
7/16
1
1-1/8
1-1/4
1-3/8
1-1/2
7/16
7/16
7/16
7/16
7/16
Throat
Inch
Dimensions
SHORT SERIES
LONG SERIES
POUCHED
BORE
DIA.
HEX
SHANK
FLUTE
LENGTH
OAL
8
8
8
8
AUG61209
AUG61211
AUG61216
AUG61221
AUG61209P
AUG61211P
AUG61216P
AUG61221P
3/8
1/2
9/16
5/8
5/16
5/16
7/16
7/16
12
12
12
12
6
6
6
6
8
8
8
8
AUG61226
AUG61231
AUG61236
AUG61241
AUG61226P
AUG61231P
AUG61236P
AUG61241P
11/16
3/4
13/16
7/8
15/16
7/16
7/16
7/16
7/16
7/16
6
6
6
6
6
8
8
8
8
8
AUG61246
AUG61251
AUG61256
AUG61261
AUG61266
AUG61246P
AUG61251P
AUG61256P
AUG61261P
AUG61266P
1
1-1/8
1-1/4
1-3/8
1-1/2
7/16
7/16
7/16
7/16
7/16
18
18
18
18
AUG61308
AUG61309
AUG61311
AUG61316
AUG61308P
AUG61309P
AUG61311P
AUG61316P
12
12
12
12
12
18
18
18
18
18
AUG61321
AUG61326
AUG61331
AUG61336
AUG61341
AUG61321P
AUG61326P
AUG61331P
AUG61336P
AUG61341P
12
12
12
12
12
18
18
18
18
18
AUG61346
AUG61351
AUG61356
AUG61361
AUG61366
AUG61346P
AUG61351P
AUG61356P
AUG61361P
AUG61366P
HEXAGONAL SHANK
• Double Spurs, double twist wood Auger Bits.
Features
• Single spur, double twist, single cutter wood Auger Bits.
• Self feeding screw point.
• Self feeding screw point.
• 2 set screw recesses on shank for power bit extensions.
• 2 set screw recesses on shank for power bit extensions.
• Ideal for plumbing, heating/cooling and other pipe installations.
• For electricians, pipe filters and plumbers.
BORE
DIA.
HEX
SHANK
FLUTE
LENGTH
OVERALL
LENGTH
STOCK #
3/4"
7/8"
1"
1-1/8"
7/16"
7/16"
7/16"
7/16"
4"
4"
4"
4"
6-1/2"
6-1/2"
6-1/2"
6-1/2"
AUG61280
AUG61281
AUG61282
AUG61283
1-1/4"
1-3/8"
1-1/2"
7/16"
7/16"
7/16"
4"
4"
4"
6-1/2"
6-1/2"
6-1/2"
AUG61284
AUG61285
AUG61286
D-20
POUCHED
ELECTRICIAN’S AUGER BITS
HEXAGONAL SHANK
• 1 per pack
BULK
• Bulk 3/8" - 1", 3 per pack
1-1/8" - 1-1/2", 1 per pack
PIPE AUGER BITS
Features
STOCK #
BULK
• Bulk 1/2" - 1", 3 per pack
1-1/8" - 1-1/2", 1 per pack
Screw Point
Side Lip
Wide Lands
Helps keep bit
straight as it
bores through
a hole
Expanded
Offering!
D
Medium-Fast
Screw Point
for fast boring
Hollow
Center Flutes
•
•
•
•
•
•
BORE
DIA.
HEX
SHANK
FLUTE
LENGTH
OVERALL
LENGTH
STOCK #
5/8"
11/16"
3/4"
13/16"
7/8"
1"
1-1/8"
1-1/4"
5/16"
5/16"
5/16"
5/16"
5/16"
5/16"
7/16"
7/16"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
8-1/2"
8-1/2"
8-1/2"
8-1/2"
8-1/2"
8-1/2"
8-1/2"
8-1/2"
AUG61268
AUG61269
AUG61270
AUG61271
AUG61272
AUG61273
AUG61274
AUG61275
• 1 per pack
WOOD AUGER BITS & EXTENSIONS
SINGLE SPUR SOLID CENTER AUGER BITS
Features
• Solid center design provides maximum rigidity during use.
• Single spur scribes the circumference of the hole to be bored.
• Coarse screw point enables fast boring in both hard and soft woods.
Screw Point
• Cutting edge precision ground for long life.
Cutter
Spur
Side Lip
Solid center design
Throat
Inch
Dimensions
BORE
DIA.
SHORT SERIES
HEX
SHANK
LONG SERIES
STOCK #
FLUTE
LENGTH
OAL
BULK
POUCHED
7/32
7/32
5/16
5/16
4-1/2
4-1/2
4-1/2
4-1/2
7-1/2
7-1/2
7-1/2
7-1/2
AUG176601
AUG176602
AUG176603
AUG176604
AUG176601P
AUG176602P
AUG176603P
AUG176604P
11/16
3/4
13/16
7/8
5/16
5/16
5/16
5/16
4-1/2
4-1/2
4-1/2
4-1/2
7-1/2
7-1/2
7-1/2
7-1/2
AUG176605
AUG176606
AUG176607
AUG176608
AUG176605P
AUG176606P
AUG176607P
AUG176608P
15/16
1
1-1/8
1-1/4
5/16
5/16
7/16
7/16
4-1/2
4-1/2
4-1/2
4-1/2
7-1/2
7-1/2
7-1/2
7-1/2
AUG176609
AUG176610
AUG176611
AUG176612
AUG176609P
AUG176610P
AUG176611P
AUG176612P
1-3/8
1-1/2
7/16
7/16
4-1/2
4-1/2
7-1/2
7-1/2
AUG176613 AUG176613P
AUG176614 AUG176614P
• Bulk 7/16"-1", 3 per pack, 1-1/8" -1-1/2", 1 per pack
Dimensions
BORE
DIA.
HEX
SHANK
FLUTE
LENGTH
OAL
11/16
3/4
13/16
7/8
5/16
5/16
5/16
5/16
12
12
12
12
15/16
1
1-1/16
1-1/8
5/16
5/16
5/16
7/16
1-1/4
1-3/8
1-1/2
7/16
7/16
7/16
BULK
POUCHED
18
18
18
18
AUG176621
AUG176622
AUG176623
AUG176624
AUG176621P
AUG176622P
AUG176623P
AUG176624P
12
12
12
12
18
18
18
18
AUG176625
AUG176626
AUG176627
AUG176628
AUG176625P
AUG176626P
AUG176627P
AUG176628P
12
12
12
18
18
18
AUG176629 AUG176629P
AUG176630 AUG176630P
AUG176631 AUG176631P
• Bulk 11/16"-1", 3 per pack
1-1/16"-1-1/2", 1 per pack
Expanded
Offering!
Expanded
Offering!
POWER BIT EXTENSIONS
Fit most Boring tools with 1/4", 5/16" & 7/16" Hex Shanks
I.E. AUGER, MULTISPUR & SPADE BITS
SHORT AUGER BITS
With 1/4" Hex Power Shanks for cordless machines.
STOCK #
BORE
DIA.
FLUTE
LENGTH
OVERALL
LENGTH
BULK
CARDED
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
1"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
AUG61371
AUG61372
AUG61373
AUG61374
AUG61375
AUG61376
AUG61377
AUG61378
AUG61379
AUG61380
AUG61371C
AUG61372C
AUG61373C
AUG61374C
AUG61375C
—
—
—
—
—
Each extension comes with 2 set screws & a hex key.
HEX
DIA.
OVERALL
LENGTH
STOCK #
1/4"
1/4"
1/4"
5/16"
5/16"
7/16"
7/16"
7/16"
6"
12"
18"
18"
24"
12"
18"
24"
EXT61289
EXT61290
EXT61291
EXT61293
EXT61294
EXT61295
EXT61296
EXT61297
• 1 per pack
• Bulk 1/4" to 1/2", 3 per pack, 9/16" and above, 1 per pack
• Card 1 per card
D
STOCK #
See page A-72 for Monolock™
Quick Change Chuck Information
D-21
Wood Auger Bits
7/16
1/2
9/16
5/8
For deep boring work in large timbers, telephones and power poles,
on docks and bridges, in mining and heavy construction.
Inch
WOODWORKER’S STRIKING TOOLS
BEECHWOOD MALLETS
Made in UK
SIZE
STOCK #
4"
4-1/2"
5"
6"
WM004
WM412
WM005
WM006
OAK MALLETS
STEEL HAMMERS
KIZUCHI, Japan
with square head & round face
GENNOU, Japan
SIZE
DIA.
36
42
48
54
STOCK #
mm
mm
mm
mm
WM36
WM42
WM48
WM54
SIZE
STOCK #
8 oz.
10-1/2 oz.
13.2 oz.
WM225
WM300
WM375
• 1 per pack
• 1 per pack
• 1 per pack
WOOD CHISELS
PROFESSIONAL QUALITY
D
Striking Tools / Chisels
WOOD CHISELS, DROP FORGED
WITH ACETATE HANDLES
SIZE
STOCK #
1/4"
3/8"
1/2"
5/8"
3/4"
7/8"
1"
1-1/4"
1-1/2"
WC66901
WC66902
WC66903
WC66904
WC66905
WC66906
WC66907
WC66908
WC66909
Features
• The chisels are drop forged from premium chrome
vanadium steel.
• Blade surface and tapered beveled sides are
precision ground to a satin polish finish.
• Each chisel is approximately 10" in length with a
5" handle.
• Smooth contoured handle shape assures
comfortable grip.
• Bulk 6 per pack
WOOD CHISELS, DROP FORGED
WITH METAL STRIKING CAP HANDLES
SIZE
STOCK #
1/4"
3/8"
1/2"
5/8"
3/4"
7/8"
1"
1-1/4"
1-1/2"
WC66911
WC66912
WC66913
WC66914
WC66915
WC66916
WC66917
WC66918
WC66919
Features
vanadium steel.
• Blade surface and tapered beveled sides are precision
ground to a satin polish finish.
5" handle.
• The metal striking cap in the handle protects the chisel
during repeated uses.
• Smooth contoured handle shape is lathe turned from a
solid piece of acetate to prevent distortion.
• Bulk 6 per pack
WOOD CHISEL SETS, DROP FORGED
WITH WOODEN HANDLES
SETS IN FITTED WOODEN BOX
WC66958
D-22
4 Pc. Set contains 1 each:
1/4", 1/2", 3/4", 1"
1/4", 3/8", 1/2", 5/8", 3/4", 1"
1/4", 5/16", 3/8", 1/2", 5/8"
3/4", 7/8", 1", 1-1/4", 1-1/2"
WC66954
WC66956
WC66958
Features
vanadium steel.
• Blade surface and tapered beveled sides are precision
ground to a satin polish finish.
5" handle.
• The wooden handles are made of selected hardwood.
Each handle is bound by double-steel hoops for
strength and durability.
NOMI™ CHISELS FOR THE CRAFTSMAN
™
Super Chisels
From Japan
For The Craftsman
Rated #1 by
Fine Woodworking
Magazine’s Chisel Survey
(Dec. '99)
CHISEL SIZE
STOCK #
1/4"
3/8"
1/2"
5/8"
3/4"
7/8"
1"
1-3/8"
1-1/2"
1-5/8"
WC66941
WC66942
WC66943
WC66944
WC66945
WC66946
WC66947
WC66948
WC66949
WC66950
Very sharp & tough chisel edge for
delicate as well as heavy woodworking.
Features
• 1 per pack
• Single hollow ground back reduces area of
contact with the workpiece, lessening friction which results in smooth & clean cuts.
CHISEL SETS
DESCRIPTION
STOCK #
3 PC. SET
1 ea.: 3/8", 1/2", 3/4"
WC66951
10 PC. SET
1 ea.: 1/4", 3/8", 1/2", 5/8", 3/4"
7/8", 1", 1-3/8", 1-1/2", 1-5/8"
WC66952
• High quality Red Oak handle.
• Steel ring on handle for work with mallet or
hammer ensures both delicate fine detail
work as well as heavier tasks.
NOMI Chisels
Biscuits / Joiner Blades
• High quality laminated steel (The art of
joining harder steel for cutting edge onto
soft steel body was developed in Japan).
D
Sharpening and care instruction sheet
supplied with each chisel.
BISCUITS
BISCUIT JOINER BLADES
• For joints where
strength is critical.
• Made of
compressed
beechwood for
strength and
durability.
• 8 Carbide Tipped teeth.
• Cut smooth, accurate slots for spline joinery.
• For use on plate joining machines from: Elu, Bosch, Lamello,
Freud, Makita, DeWalt, Kaiser, Virtex, Porter Cable and others.
BISCUIT
NO.
SIZE
#0
1-7/8" x 5/8"
#10
2-1/8" x 3/4"
#20
2-3/8" x 7/8"
Mixed
#0 (250)
#10 (250)
#20 (500)
PACK
QTY.
STOCK #
100
1000
100
1000
100
1000
B000
B010
B105
B110
B205
B210
BLADE
DIA.
NO. OF
TEETH
ARBOR
DIA
RPM
STOCK #
4"
8
22mm
(7/8")
14,000
SB67070
1000
BM10
• 1 per pack
D-23
RECIPROCATING SAW BLADES
INDUSTRIAL BI-METAL COBALT
RECIPROCATING
Expanded
SAW BLADES
Offering!
1/2" SHANK
BLADE
CONFIGURATION
Saw Blades
D
LENGTH x WIDTH x THICKNESS
Features
• Matrix HSS cutting edge with flexible alloy back resists tooth strippage.
• Tooth hardness of RC 65-67 enables a sharp, long lasting cutting edge.
• Shatterproof — handles the toughest cutting jobs.
STOCK #
TPI
APPLICATION
5 / POUCH
MM
4 x 3/4 x .035
100 x 20 x .9
14
Metal over 1/8" thick,
Barstock & Angles
RSBM414
RSBM414P
4 x 3/4 x .035
100 x 20 x .9
18
Metal over 18 gauge to 1/8" thick conduit,
pipe, channels & tubing
RSBM418
RSBM418P
4 x 3/4 x .035
100 x 20 x .9
24
Metal cutting 18 gauge & under.
Galvanized pipe under 18 gauge
RSBM424
RSBM424P
6 x 3/4 x .035
150 x 20 x .9
10
Wood, nail embedded wood,
compositions, plastic, cast aluminum,
& non-ferrous metals
RSBM610
RSBM610P
6 x 3/4 x .035
150 x 20 x .9
14
Metal over 1/8" thick,
Barstock & Angles
RSBM614
RSBM614P
6 x 3/4 x .035
150 x 20 x .9
18
Metal over 18 gauge to 1/8" thick conduit,
pipe, channels & tubing
RSBM618
RSBM618P
6 x 3/4 x .035
150 x 20 x .9
24
Metal cutting 18 gauge & under.
Galvanized pipe under 18 gauge
RSBM624
RSBM624P
8 x 3/4 x .035
200 x 20 x .9
10
Wood, nail embedded wood, composition
materials, plastic, cast aluminum, light metals
RSBM810
RSBM810P
8 x 3/4 x .035
200 x 20 x .9
14
Large diameter pipe
RSBM814
RSBM814P
Non-ferrous metal 1/8" to 1/2" thick
RSBM1218
RSBM1218P
6 x 3/4 x .050 150 x 20 x 1.3
6
Heavy duty, all woods, nail embedded woods
RSBM66
RSBM66P
6 x 7/16 x .050 150 x 11 x 1.3
6
Heavy duty, wood scroll cuts
RSBM556
RSBM556P
9 x 3/4 x .050 225 x 20 x 1.3
6
RSBM96
RSBM96P
12 x 3/4 x .050 300 x 20 x 1.3
6
RSBM126
RSBM126P
6 x 3/4 x .035
6
Plastic with metal lath, sheer rock
plasterboard, plaster walls. Tooth design
cuts both forward & on back stroke
RSBM66W
RSBM66WP
150 x 20 x .9
DEMOLITION BLADES
6 x 7/8 x .062
RSBM6786
RSBM6786P
RSBM67810
RSBM67810P
All woods, metal, nail embedded wood
INCHES
RSBM9786
RSBM9786P
RSBM97810
RSBM97810P
6
RSBM12786
RSBM12786P
10
RSBM127810
RSBM127810P
STANDARD
RECIPROCATING BLADES
HIGH CARBON STEEL
1/2" SHANK
3 / POUCH
6
10
12 x 7/8 x .062
25 / BOX
10
6
9 x 7/8 x .062
D-24
POUCHED
50 / BOX
INCHES
12 x 3/4 x .050 300 x 20 x 1.3 18
BLADE
CONFIGURATION
BOXED
Features
• Hardened carbon steel blade for long life.
• Fit all reciprocating saws using 1/2" universal shank.
TPI
APPLICATION
MM
BOXED
STOCK #
POUCHED
50 / BOX
5 / POUCH
6 x 3/4 x .050 150 x 20 x 1.3
6
Fast cutting, work in all woods, plastics &
laminates. Long life
RSHC66
RSHC66P
12 x 3/4 x .050 300 x 20 x 1.3
6
Fast cutting, work in all woods, plastics &
laminates. Long life
RSHC126
RSHC126P
JIG SAW BLADES
INDUSTRIAL
BI-METAL COBALT
JIG SAW BLADES
1/4" UNIVERSAL SHANK
BLADE
CONFIGURATION
Features
• Super hard Cobalt Matrix teeth with flexible alloy back.
• Tooth hardness of RC 65-67 enables a sharp,
long lasting cutting edge.
STOCK #
POUCHED
CARDED
50/BOX
5/POUCH
1/CARD
MM
4 x 3/8 x .035
100 x 10 x .9
6
Wood, fiber board, asbestos
JSBM4386
JSBM4386P
JSBM4386C
3-5/8 x 3/8 x .035
91 x 10 x .9
8
3/8" to 1/2" mild steel, aluminum & plastic
JSBM3588
JSBM3588P
JSBM3588C
100 x 10 x .9 10
Wood, plywood, hard board
JSBM43810 JSBM43810P
JSBM43810C
2-3/4 x 5/16 x .035
70 x 8 x .9
14
Non-ferrous metals, fiberglass,
hard rubber, nail-embedded wood
JSBM23414C
2-3/4 x 5/16 x .035
70 x 8 x .9
18
Metal 18 gauge & under
JSBM23418C
2-3/4 x 5/16 x .035
70 x 8 x .9
24
Metal and non-ferrous metal up to 1/8"
JSBM23424C
6 PC. SET
STOCK # JSS6B
Set contains one blade each: JSBM4386, JSBM3588, JSBM43810, JSBM23414, JSBM23418, JSBM23424
Features
• Made from Premium High Speed Steel.
• Super hard precision ground teeth for faster, smoother cutting.
• Fit all jig saws using 1/4" universal shank.
BOXED
STOCK #
POUCHED
CARDED
50/BOX
5/POUCH
1/CARD
TPI
APPLICATION
INCHES
MM
2-3/4 x 5/16 x .032
70 x 8 x .8
14
Ferrous-metals 1/4" to 3/8" thick
Non-ferrous 1/8" to 1/4" thick
JSH23414
JSH23414P
JSH23414C
3 x 5/16 x .032
75 x 8 x .8
18
Non-ferrous 1/16" to 1/8" thick
JSH23418
JSH23418P
JSH23418C
3 x 5/16 x .032
75 x 8 x .8
24
Non-ferrous to 1/8" thick
JSH23424
JSH23424P
JSH23424C
3 x 5/16 x .032
75 x 8 x .8
32
Non-ferrous to 1/8" thick
JSH23432
JSH23432P
JSH23432C
Features
• Precision sharpened to cut fine intricate shapes.
• Fit all jig saws using 1/4" universal shank.
HIGH CARBON STEEL
JIG SAW BLADES
BOXED
STOCK #
POUCHED
CARDED
50/BOX
5/POUCH
1/CARD
TPI
APPLICATION
INCHES
MM
3-1/8 x 5/16 x .032
78 x 8 x .8
10
Coarse cut in wood & composition board
JSC31810
JSC31810P
JSC31810C
2-3/4 x 1/4 x .035
70 x 6 x .9
12
Scroll cutting wood, plywood, plastics,
1/4" to 1" thick. Smooth cuts
JSC23412
JSC23412P
JSC23412C
2-3/4 x 3/16 x .040 70 x 5 x 1.0
20
Scroll cutting wood, plywood, plastics.
Super fine finish
JSC23420
JSC23420P
JSC23420C
D-25
D
Saw Blades
INDUSTRIAL
HIGH SPEED STEEL
JIG SAW BLADES
BLADE
CONFIGURATION
APPLICATION
INCHES
4 x 3/8 x .035
BLADE
CONFIGURATION
BOXED
TPI
Expanded
Offering!
JIG SAW BLADES
INDUSTRIAL
BI-METAL COBALT
JIG SAW BLADES
BOSCH SHANK
Features
• For jig saws requiring Bosch shank.
• Tooth hardness of RC 65-67 enables a sharp, long lasting cutting edge.
BLADE
CONFIGURATION
Saw Blades
D
BOXED
STOCK #
POUCHED
CARDED
50/BOX
5/POUCH
1/CARD
TPI
APPLICATION
INCHES
MM
3 x 5/16 x .035
75 x 8 x .9
14
Metals over 1/8", plastic, fiberboard
JSBM314
JSBM314P
JSBM314C
3 x 5/16 x .035
75 x 8 x .9
18
Metals over 18 gauge. Tubing, conduit
JSBM318
JSBM318P
JSBM318C
3 x 5/16 x .035
75 x 8 x .9
24
Thin metals, plastic, Fine cuts under 18 gauge
JSBM324
JSBM324P
JSBM324C
4 x 5/16 x .050 100 x 8 x 1.3
10
Smooth wood cuts, Plastics
JSBM410
JSBM410P
JSBM410C
4 x 5/16 x .050 100 x 8 x 1.3
8
Wood, Fiberglass
JSBM408
JSBM408P
JSBM408C
4 x 5/16 x .050 100 x 8 x 1.3
6
Fast wood cuts
JSBM406
JSBM406P
JSBM406C
BOXED
STOCK #
POUCHED
CARDED
50/BOX
5/POUCH
1/CARD
HIGH CARBON STEEL
JIG SAW BLADES
BOSCH SHANK
Features
• For jig saws requiring Bosch shank.
• Precision sharpened to cut fine intricate shapes.
BLADE
CONFIGURATION
TPI
INCHES
APPLICATION
MM
4 x 5/16 x .050 100 x 8 x 1.3
6
Softwood, hardwood, plywood, chipboard,
plastic. Clean / fast cutting.
JSC406
JSC406P
JSC406C
4 x 5/16 x .050 100 x 8 x 1.3
10
Softwood, hardwood, plywood, chipboard,
plastic up to 1" thick. Fine smooth cuts.
JSC410
JSC410P
JSC410C
AIR SAW BLADES
INDUSTRIAL
BI-METAL COBALT
AIR SAW BLADES
FOR PNEUMATIC
SAW MACHINES
BLADE
CONFIGURATION
D-26
Features
• Fits most popular pneumatic saw machines.
BOXED
STOCK #
POUCHED
CARDED
50/BOX
5/POUCH
1/CARD
INCHES
MM
TPI
APPLICATION
3 x 1/2 x .025 75 x 12.7 x .6
18
Scroll-cut in metal, hard plastic
JSA31218
JSA31218P
JSA31218C
3 x 1/2 x .025 75 x 12.7 x .6
24
Scroll-cut in thin metals, plastics, fiberglass
JSA31224
JSA31224P
JSA31224C
3 x 1/2 x .025 75 x 12.7 x .6
32
Scroll-cut in thin sheet metals, fiberglass
JSA31232
JSA31232P
JSA31232C
4 x 1/2 x .025 100 x 12.7 x .6
18
General purpose, metal over 18 gauge
JSA418
JSA418P
JSA418C
4 x 1/2 x .025 100 x 12.7 x .6
32
General purpose, thin metal, fine cutting
JSA432
JSA432P
JSA432C
HOLE SAWS
INDUSTRIAL
BI-METAL COBALT
HOLE SAWS
Features
• High Speed Cobalt Steel teeth are electron beam welded to a steel body.
This process enables teeth to cut faster and stay sharper than standard teeth.
• High alloy steel body is shatter resistant for superior durability.
• 4/6 variable pitch reduces vibration and heat generation for smooth cutting.
• Positive rake teeth offer better chip clearance.
• Cutting depth 1-1/2".
• Cuts holes in wood, plywood, plastic, fiberboard, or any machinable metal, including:
nail-embedded wood, pipe, stainless steel, etc.
Inch
Dimensions
DIA.
STANDARD HOLE SAW
USE
ARBOR
TYPE
(Separate Arbor required)
PIPE
TAP
SIZE
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3-1/4
3
3-1/2
3-3/4
3-1/2
4
TYPE B
4-1/2 HOSA62591
5
5-1/2
6
4
• 1 per box
CARBIDE
TIPPED
HOLE SAWS
R.P.M.
STOCK #
STEEL
IRON
550
460
390
350
300
275
250
230
210
195
180
170
160
150
140
135
130
125
120
115
365
300
260
235
200
180
165
150
140
130
120
115
105
100
95
90
85
80
80
75
HOSA62502
HOSA62504
HOSA62506
HOSA62508
HOSA62510
HOSA62512
HOSA62514
HOSA62516
HOSA62518
HOSA62520
HOSA62522
HOSA62524
HOSA62526
HOSA62528
HOSA62530
HOSA62532
HOSA62534
HOSA62536
HOSA62538
HOSA62540
105
95
90
85
75
65
60
55
70
65
60
55
50
45
40
35
HOSA62544
HOSA62548
HOSA62552
HOSA62556
HOSA62560
HOSA62564
HOSA62568
HOSA62572
DIA.
PIPE
TAP
SIZE
PIPE
ENT.
SIZE
3/4
3/8
1/2
1
3/4
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
Standard
Hole Saw
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
2-7/8
3
3-1/4
3-1/2
3-3/4
4
4-1/2
5
5-1/2
6
Hole Saw
with built-in
Arbor
1
1-1/2
1-1/4
1-1/2
2
2
2-1/2
2-1/2
3
3-1/2
4
R.P.M.
STOCK #
STEEL
IRON
550
460
390
350
300
275
250
230
365
300
260
235
200
180
165
150
HOSA62902
HOSA62904
HOSA62906
HOSA62908
HOSA62910
HOSA62912
HOSA62914
HOSA62916
195
180
170
160
150
140
135
130
125
120
115
105
130
120
115
105
100
95
90
85
80
80
75
70
HOSA62920
HOSA62922
HOSA62924
HOSA62926
HOSA62928
HOSA62930
HOSA62932
HOSA62934
HOSA62936
HOSA62938
HOSA62940
HOSA62944
95
90
85
75
65
60
55
65
60
55
50
45
40
35
HOSA62948
HOSA62952
HOSA62956
HOSA62960
HOSA62964
HOSA62968
HOSA62972
• 1 per box
See page D-30 for arbor selection
Expanded
Offering!
Inch
Dimensions
DIA.
USE
ARBOR
TYPE
PIPE
TAP
SIZE
PIPE
ENT.
SIZE
STOCK #
DIA.
USE
ARBOR
TYPE
PIPE
TAP
SIZE
PIPE
ENT.
SIZE
STOCK #
Features
• Tungsten Carbide Tipped teeth
provide highest wear resistance,
and longer life.
• 3 teeth per inch for better chip
clearance, and faster cutting.
• Cutting depth 1-1/2 ".
• Designed for sawing holes in
abrasive materials such as
fiberglass, particle board,
asbestos board, cast iron,
formica and ceramic tile.
3/4
TYPE A
7/8
3/4
HOSA62590
1
1-1/8
1
1-1/4
1-3/8
1-1/2
1-1/4
1-5/8
1-3/4 TYPE B
1-1/2
1-7/8 HOSA62591
2
2-1/8
2-1/4
2
2-3/8
• 1 per box
3/8
1/2
3/4
1
1-1/4
1-1/2
HOSA73204
HOSA73206
HOSA73208
HOSA73210
HOSA73212
HOSA73214
HOSA73216
HOSA73218
HOSA73220
HOSA73222
HOSA73224
HOSA73226
HOSA73228
HOSA73230
2-1/2
2-5/8
2-1/2
2-3/4
2-7/8
3
3-1/4 TYPE B
3
3-1/2 HOSA62591
3-3/4
3-1/2
4
4-1/2
4-3/4
4-1/2
5
5-1/2
6
2
2-1/2
4
HOSA73232
HOSA73234
HOSA73236
HOSA73238
HOSA73240
HOSA73244
HOSA73248
HOSA73252
HOSA73256
HOSA73264
HOSA73266
HOSA73268
HOSA73270
HOSA73274
D-27
D
Hole Saws
5/8
3/4
TYPE A
7/8
3/4
HOSA62590
1
1-1/8
1
1-1/4
1-3/8
1-1/2
1-1/4
1-5/8
1-3/4
1-1/2
1-7/8
2
TYPE B
2-1/8 HOSA62591
2-1/4
2
2-3/8
2-1/2
2-5/8
2-1/2
2-3/4
2-7/8
3
PIPE
ENT.
SIZE
HOLE SAW WITH
BUILT-IN ARBOR
Inch
Dimensions
BI-METAL HOLE SAW KITS
SPECIALTY
BI-METAL
VARIABLE PITCH
HOLE SAW KITS
7 Pc. Mechanic’s Kit
Stock # HOSA7
in strong molded plastic case
Most used for applications in the automotive,
construction and manufacturing industries.
Contains 1 hole saw each:
7/8", 1", 1-1/8", 1-1/4", 1-1/2"
Kit also includes 1 arbors.
8 Pc. Plumber’s Kit
Stock # HOSA8P
Designed for plumbers. This kit contains
pipe tap sizes for pipe through 2".
3/4", 7/8", 1-1/8", 1-1/2", 1-3/4", 2-1/4"
13 Pc. Maintenance Kit
Hole Saws
D
Stock # HOSA13
8 Pc. Electrician’s Kit
Designed for plumbers, electricians, industrial and general
purpose maintenance. This kit contains 9 plumbing and
electrical sizes for pipe and conduit through 2".
3/4", 7/8", 1-1/8", 1-3/8", 1-1/2", 1-3/4"
2", 2-1/4" and 2-1/2"
Kit also includes 3 arbors and 12" extension.
Stock # HOSA8E
Designed for electricians. This kit contains pipe
entrance sizes for pipe and conduit through 2".
7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2"
LOCK INSTALLATION KITS
DESCRIPTION
Features
• Each kit contains (1 each):
Hole saw, wood spade bit
and pilot drill bit.
• For installing locks in wood
and metal doors.
• Complete Backset and wood
latch hole kit for deadbolt
or door locks.
• High Speed Steel hole saws
with 1-3/8" depth of cut.
STOCK #
2-1/8" Lockset with 1" latch for SCHLAGE;
YALE; KWIKSET; IDEAL; SARGENT; KWIKSET LK21801
WESLOCK and other popular brands
2-1/8" Lockset with 7/8" latch for
SCHLAGE (F series); YALE; DEXTER
LK21878
1-7/8" Lockset with 1" latch for WESLOCK
LK17801
1-5/8" Lockset with 1" latch for YALE
(3200 / 3300 Series)
LK15801
1-1/2" Lockset with 1" latch for SCHLAGE
(B400 / H400 Series)
LK11201
1-1/2" Lockset with 7/8" latch for SCHLAGE
(B100 / F160 / H100 Series)
LK11278
CARBON STEEL HOLE SAWS
DIA.
Features (Separate Arbor Required)
• Hardened and tempered alloy steel for long life.
• Precision-sharpened teeth for smooth cuts.
• For cutting wood, composite materials and
plastic up to 3/4" deep.
3/4"
7/8"
1"
1-1/8"
1-1/4"
1-3/8"
1-1/2"
1-5/8"
• Fits all standard arbors.
• 1 per box
D-28
USE
ARBOR
TYPE
ARBOR C
# HOSA62690
ARBOR D
# HOSA62691
USE
ARBOR
TYPE
STOCK #
DIA.
HOSA62604
HOSA62606
HOSA62608
HOSA62610
HOSA62612
HOSA62614
HOSA62616
HOSA62618
1-3/4"
HOSA62620
1-7/8"
HOSA62622
2"
2-1/8"
2-1/4"
STOCK #
HOSA62624
ARBOR D
# HOSA62691
HOSA62626
HOSA62628
2-1/2"
HOSA62632
3"
HOSA62640
HOLE SAWS
CARBIDE
GRIT-EDGE
HOLE SAWS
Carbide grit
bonded to
heavy steel
body.
Features
•
•
•
•
•
•
•
•
Tungsten carbide cutting edge.
1-1/8" cutting depth.
3/16" thick heavy duty backing plate.
High heat and abrasion resistance.
No teeth to dull or chip.
Cuts extremely hard abrasive materials.
Resists snagging.
Eliminates need for drive plate.
Applications
• Use for plumbing, construction, marine & aircraft applications.
• Recommended for cutting laminates, fiberglass, ceramic tile,
marble and slate, cast iron and composites.
HOLE SAWS
USE
ARBOR
TYPE
SIZE
TYPE E
HOSA76061
PIPE
ENT.
SIZE
1/2"
3/4"
3/8"
1/2"
1"
3/4"
STOCK #
1"
1-1/4"
1-1/2"
1-1/4"
1-1/2"
TYPE F
HOSA76062
2"
2"
2-1/2"
3"
TYPE F
HOSA76062
3-1/2"
4"
HOSA76003
HOSA76004
HOSA76006
HOSA76007
HOSA76008
HOSA76009
HOSA76010
HOSA76011
HOSA76012
HOSA76013
HOSA76014
HOSA76015
HOSA76016
HOSA76017
HOSA76018
HOSA76019
HOSA76020
HOSA76021
HOSA76022
HOSA76023
HOSA76024
HOSA76025
RECESSED LIGHTING HOLE SAWS
6-3/8"
6-5/8"
6-7/8"
HOSA76040
HOSA76041
HOSA76042
TYPE F
HOSA76062
• 1 per box
D
Hole Saws
5/8"
3/4"
7/8"
1"
1-1/8"
1-1/4"
1-3/8"
1-1/2"
1-3/4"
1-7/8"
2"
2-1/8"
2-1/4"
2-3/8"
2-1/2"
2-3/4"
3"
3-1/4"
3-3/8"
3-3/4"
4"
4-1/2"
PIPE
TAP
SIZE
Carbide Grit® Hole Saw
Operating Speeds
Hole Saw Size
Inches
MM
5/8
3/4
–
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-3/8
3-3/4
4
4-1/2
Brick
Ceramic
16
19
20
22
25
29
32
35
38
44
48
51
54
57
60
64
70
76
83
86
95
102
114
620
510
470
430
380
340
310
280
260
220
200
190
180
170
160
150
140
130
120
115
102
95
82
Slate Reinforced
Plastics
1540
1280
1180
1090
960
850
770
700
640
550
510
480
450
430
400
380
350
320
295
285
255
240
215
2140
1790
1660
1530
1340
1190
1070
980
890
770
720
670
630
600
570
540
500
450
415
400
350
330
290
FiberGlass
920
770
715
660
580
510
460
420
390
330
310
290
280
270
250
230
210
190
180
175
160
150
125
CARBIDE GRIT ROD SAWS
LENGTH
BULK
STOCK #
CARDED
FINE LINE (.0090 Dia.)
Features
• Fits standard Hack Saw frame.
• Carbide Grit hardness RC70.
• Alloy steel and backing.
See page D-31 for Hack Saw Frames
• Cuts in any direction.
• Cuts Hardened Steel RC60-RC62,
bolts, ceramics, thin wall pipe,
glass, fiberglass.
10"
12"
HOSA76051
HOSA76052
HOSA76051C
HOSA76052C
STANDARD (0.100 Dia.)
10"
12"
HOSA76053
HOSA76054
• Bulk 100 per pack
• Card 1 per card
HOSA76053C
HOSA76054C
D-29
HOLE SAW ARBORS & ACCESSORIES
ARBORS
COMPLETE
WITH
PILOT DRILLS
TYPE A
TYPE B
TYPE C
TYPE D
TYPE E
TYPE F
ARBORS FOR BI-METAL, CARBIDE TIPPED, CARBON STEEL &
CARBIDE GRIT-EDGE HOLE SAWS
Hole Saws
D
Expanded
Offering!
DESCRIPTION
SHANK
SIZE
THREAD
SIZE
FITS
HOLE SAWS
PILOT
DRILL
CHUCK
SIZE
STOCK #
Type A for Bi-Metal and
Carbide Tipped Hole Saws
1/4" Round
1/2"-20
5/8" - 1-1/8"
HSS 1/4"
1/4"
HOSA62590
Type B for Bi-Metal and
Carbide Tipped Hole Saws
7/16" Hex
5/8"-18
1-1/4" - 6"
HSS 1/4"
1/2"
HOSA62591
Type C for
Carbon Steel Hole Saws
1/4" Round
1/2"-20
3/4" - 1-1/4"
HSS 1/4"
1/4"
HOSA62690
Type D for
Carbon Steel Hole Saws
1/4" Round
1/2"-20
1-3/8" - 3"
HSS 1/4"
1/2''
HOSA62691
Type E for
Carbide Grit Edge-Hole Saws
3/8" Hex
1/2"-20
5/8" - 1-3/16"
Carb. Tipped
1/4"
3/8" - 1/2"
HOSA76061
Type F for
Carbide Grit-Edge Hole Saws
3/8" Hex
5/8"-18
1-1/4" - 6"
Carb. Tipped
1/4"
3/8" - 1/2"
HOSA76062
• 1 per pack
1/4" PILOT DRILLS
FOR USE WITH
HOLE SAW
ARBORS
Features
• High Speed Steel Pilot Drills for use with Bi-Metal and carbon
steel hole saws.
• Carbide Tipped Pilot Drills for use with Carbide Tipped and
Carbide Grit-Edge hole saws.
• For general cutting in wood, plastics, metals.
DESCRIPTION
PD61801
PD61802
DIA.
OVERALL
LENGTH
Expanded
Offering!
STOCK #
BULK
CARDED
HIGH SPEED STEEL
3 Whistle notches on shank
for set screw
1/4"
4"
PD61801
PD61801C
3 Flats on shank
1/4"
4"
PD61802
PD61802C
PD61803
PD61803C
CARBIDE TIPPED
PD61803
2 Flats on shank
• Card 1 per card
12" EXTENSION
for 7/16" shank Arbors
• 1 per pack
D-30
STOCK # PD61810
1/4"
3-1/4"
HAND HACKSAW FRAMES
HIGH PRECISION INDUSTRIAL DESIGN
ULTRA SUPER FRAME ........ STOCK # HSF40
• For the most demanding professional.
Thumb rest for
better holding.
• Computer aided design produces a light, sturdy metallic
body, steel bow and Zamac handle.
• Exclusive lever locking system provides high precision tensioning of blades, and ultimate in blade control.
Ergonomic
Zamac grip
allows storing
sawblades in
steel bow.
Exclusive Lever
locking System
provides 200 LB.
tensioning of sawblade.
• Frame includes spare blade storage in bow, and adjusts
for flush and angle cuts.
• Supplied with cobalt 12" x 24" TPI blade.
• Quick and easily adjustable.
• 1 frame per sleeve, 10 per box
COMPACT HEAVY DUTY
D
POPULAR JACK FRAME ........ STOCK # HSF41
Hacksaw Frames / Blades
• Heavy gauge chrome polished steel body, with
wrap around heavy duty unbreakable light alloy
handle.
• One position flush cutting angle.
• Quick and easily adjustable.
• Supplied with 12" x 24" TPI cobalt blade.
• 1 frame per sleeve, 10 per box
HACKSAW BLADES
BI-METAL COBALT
880 lbs
FLEXIBLE
SUPPLE
STRONG
• The ultimate safety blade which is flexible, shatterproof,
supple and strong.
• Latest technology is used for the finest sawing performance.
BLADE SIZE
12" x 1/2" x .025"
(300 x 13 x .65 mm.)
• 10 blades per pack
TPI
TEETH RAKE
STOCK #
• Cobalt steel teeth stay sharper and last longer.
18
O
10
HB18
• 10O Rake teeth give smoother, faster and easier cuts.
24
10O
HB24
32
O
HB32
• 65 HRC hardened teeth have 50 HRC back hardness allowing
rigidity during use.
10
• One piece construction can handle the toughest materials.
D-31
CIRCULAR SAW BLADES
Use for high volume sawing in woods, non-ferrous metals and rough
materials such as compositions, roofing and flooring. Tungsten carbide
teeth retain a cutting edge many times longer than any steel blade.
CARBIDE TIPPED
BLADES
• Cuts smoother, faster than ordinary carbide blades.
• Lasts up to 50 times longer than steel blades.
Expanded
Offering!
BLADE
SIZE
NO. OF
TEETH
ARBOR
KERF
RPM
STOCK #
ULTRA THIN KERF – ANTI-KICKBACK SHOULDER
Hardened
Plate
Thin Kerf
Specially
Engineered
Heat Vents
6-1/2"
Combination
7-1/4"
Combination
24
5/8"
.065
9800
SB68001
24
5/8"
.065
9400
SB68002
• Suitable for cordless power tools
• Pack: 25 blades per carton
HEAVY DUTY CONTRACTOR BLADES
Arbor Hole
Perfectly
Centered
Circular Saw Blades
D
Anti-Kickback
Shoulder
Design
Thin Kerf Blade
7-1/4"
Combination
7-1/4"
Cross Cut
8-1/4"
Combination
10"
Combination
10"
Cross Cut
24
5/8" UNI
.082
9000
SB67064
40
5/8" UNI
.082
9000
SB67072
24
5/8" UNI
.084
7900
SB67069
40
5/8"
.094
7000
SB67077
60
5/8"
.094
7000
SB67066
• Pack: 25 blades per carton
DATE
RICE
LIST
THIN KERF – PROFESSIONAL BLADES
3-3/8"
Combination
4-3/8"
Combination
5-3/8"
Combination
6-1/2"
Framing
7-1/4"
Framing
8-1/4"
Framing
10"
Framing
12"
Finishing
SB68007
SB68011
24
15mm
.065
12000
SB68003
18
20mm
.065
12000
SB68004
24
10mm
.065
10400
SB68005
18
5/8" UNI
.065
9800
SB68006
18
5/8" UNI
.065
9400
SB68007
40
5/8"
.090
8200
SB68008
24
5/8"
.090
7000
SB68009
60
1"
.100
6400
SB68010
NAIL CUTTING BLADES
7-1/4"
14
5/8" UNI
.120
9400
SB68011
10"
24
5/8"
.130
7000
SB68012
SOLID SURFACES CUTTING BLADES – CORIAN
SB68014
7-1/4"
40
5/8" UNI
.100
9400
SB68013
10"
60
5/8"
.130
7000
SB68014
NON-FERROUS METAL CUTTING BLADES
SB68017
D-32
7-1/4"
40
5/8" UNI
.100
9400
SB68015
10"
60
5/8"
.100
7000
SB68016
12"
80
1"
.130
6400
SB68017
• Pack: 3-3/8" to 8-1/4" – 10 blades per carton
• Pack: 10" – 5 blades per carton
• Pack: 12" – 1 blade per carton
CIRCULAR SAW BLADES
PRECISION
STEEL BLADES
Economical option compared to carbide blades. Manufactured from
top-quality, high-carbon steel. Heat treated for additional hardness.
• Cut a variety of common building materials:
wood, wood composition, etc.
Precision
Ground
Teeth
• Specialty blades cut aluminum, plastic,
siding & ferrous metals.
BLADE
SIZE
NO. OF
TEETH
ARBOR
PLATE
RPM
Hardened &
Tempered
Plate Body
STOCK #
FAST CUT COMBINATION BLADES
6-1/2"
24
5/8" UNI
.054
9800
SBS67051
7-1/4"
26
5/8" UNI
.054
9400
SBS67052
10"
32
5/8"
.070
7000
SBS67053
Arbor
Hole
Perfectly
Centered
PLYWOOD BLADES
140
5/8" UNI
.054
9800
SBS67054
7-1/4"
140
5/8" UNI
.054
9400
SBS67055
10"
180
5/8"
.060
7000
SBS67056
9600
SBS67057
D
Circular Saw Blades / Band Saw Blades
6-1/2"
VINYL SIDING BLADES
7-1/4"
150
5/8" UNI
.080
ALUMINUM / PLASTICS BLADES
SBS67052
SBS67055
7"
150
5/8" UNI
.080
9600
SBS67058
10"
150
5/8"
.090
7000
SBS67059
FERROUS METAL CUTTING BLADES
7"
16
5/8" UNI
.080
9600
SBS67060
10"
16
5/8"
.090
7000
SBS67061
• Pack: 6-1/2" - 7-1/4" – 25 blades per carton
• Pack: 10" – 5 blades per carton
SBS67058
SBS67060
PORTABLE BAND SAW BLADES
Features
• Bi-metal construction increases tool life.
• RC 65-67 Cobalt Matrix cutting teeth with flexible
alloy back.
• Variable pitch reduces vibration and outperform
standard pitch blades.
INDUSTRIAL
BI-METAL HSS
PORTABLE
BAND SAW BLADES
VARIABLE PITCH
Applications
• Fit all standard portable Band Saw machines.
• For pipe, tubing & solids and all machinable metals.
STOCK #
INCHES
MM
VARIABLE
PITCH TPI
44-7/8 x 1/2 x .020
1140 x 12.7 x .50
10/14
BS1014
44-7/8 x 1/2 x .020
1140 x 12.7 x .50
14/18
BS1418
44-7/8 x 1/2 x .020
1140 x 12.7 x .50
18/24
BS2024
• Boxed 3 blades per box
3 / BOX
D-33
SCROLL / FRET SAW BLADES
Finest alloy tool steel • Teeth precision ground and hardened
Expanded
Offering!
CHART FOR CHOOSING THE RIGHT BLADE
MATERIAL
BLADE PITCH
5
7
7
9
Standard
Standard
Standard
Standard
Plywood
Less than 1/4"
2
Reverse or
Crown Tooth™
1/4" to 1/2"
Over 1/2"
Fret Saw Blades
D
BLADE TYPE
Solid Wood
Pine
Poplar
Walnut
Oak
7
9
Reverse
Reverse
MATERIAL
BLADE PITCH
BLADE TYPE
Other Man-made
Boards
MDF
Particleboard
9
9
Standard
Standard
Veneer
2/0
Standard
Plastic
Less than 1/4"
1/4" to 3/8"
Over 3/8"
5
7
9
Crown Tooth™
Crown Tooth™
Crown Tooth™
BLADE DESCRIPTION
STANDARD SKIP TOOTH
REVERSE TOOTH
CROWN TOOTH™
SPIRAL TOOTH
SKIP TOOTH
FRET SAW BLADES
DOUBLE TOOTH
FRET SAW BLADES
REVERSE SKIP TOOTH
FRET SAW BLADES
The Blitz brand, with wide spaced teeth
5" long, Plain Ends
The Blitz brand, with wide spaced double teeth
5" long, Plain Ends
For a smooth, splinter free finish on top and
bottom surfaces. Excellent blade for eliminating
tear-out on birch and maple plywood.
5" long, Plain Ends
PITCH #
THICKNESS
WIDTH
TPI
STOCK #
PITCH #
THICKNESS
WIDTH
TPI
STOCK #
PITCH #
THICKNESS
WIDTH
TPI
STOCK #
2/0
0
1
2
3
4
5
6
7
9
11
.009
.009
.012
.012
.024
.024
.028
.028
33
33
28
28
FS520020
FS520010
FS520011
FS520012
.009
.009
.012
.012
.024
.024
.028
.028
33
33
28
28
FS520210
FS520200
FS520201
FS520202
2/OR
.011
.026
28
FS440
2R
.012
.029
20
FS443
.014
.014
.016
.016
.034
.034
.039
.039
24
24
20
20
FS520013
FS520014
FS520015
FS520016
.014
.014
.016
.016
.034
.034
.039
.039
24
24
20
20
FS520203
FS520204
FS520205
FS520206
5R
.016
.038
12
FS446
7R
.017
.045
11
FS448
.019
.021
.022
.048
.055
.066
18
15
13
FS520017
FS520018
FS520019
2/0
0
1
2
3
4
5
6
7
9
11
.019
.021
.022
.048
.055
.066
18
15
13
FS520207
FS520208
FS520209
9R
.019
.054
11
FS450
• 12 per pack / 12 packs per gross
Available per gross only
CROWN TOOTH™
SCROLL SAW BLADES
SPIRAL SAW BLADES
SCROLL SAW BLADES
2-Way Cutting Action
The Tornado brand, with special piercing saws.
These blades saw in all directions and have
360O cutting capability. Excellent for 0O radius
scroll/fret work - you never have to turn the
workpiece. Use for cutting all types of materials
including wood, plastic, wax, non-ferrous
metals, plaster, bone, horn, etc.
5" long, Plain Ends
Unique tooth design allows the blade to cut on
both the up and down stroke. Finish is smooth
with clean, sharp, splinter-free edges in
hard/soft wood, plywood, plastic and Corian®.
2-way cutting action prevents melting behind
the cut in most plastic including acrylic, lexan
(polycarbonate), fiberglass, and plexiglas.
Has no top or bottom for easy blade
installation. Blade can be turned over for a
fresh new set of teeth.
5" long, Plain Ends
PITCH #
THICKNESS
WIDTH
TPI
STOCK #
PITCH #
THICKNESS
WIDTH
TPI
STOCK #
PITCH #
THICKNESS
WIDTH
TPI
STOCK #
2/0
0
1
2
3
4
5
.011
.011
.014
.016
.028
.028
.033
.039
46
41
36
36
FS524016
FS524010
FS524011
FS524012
2
.013
.026
20
FS622
REG.
.023
.070
20
FS403
3
.014
.032
16
FS623
REG.
.022
.100
20
FS405
5
.016
.038
16
FS625
.016
.019
.019
.039
.048
.048
30
30
46
FS524013
FS524014
FS524015
7
.017
.045
11
FS627
REG.
.022
.100
15
FS411
9
.018
.053
6
FS629
REG.
.022
.100
10
FS412
D-34
Ideal for use in spring tension scroll saws such
as Delta 24", Powermatic 24", Sprunger,
Shopsmith and imported spring tension scroll
saws under various trade names. The 100" and
narrower width blades can also be used in
parallel and C-arm scroll saws.
5" long, Plain Ends
SCROLL / FRET SAW BLADES
METAL CUTTING SCROLL & FRET SAW BLADES
The Finish brand, with piercing saws black with rounded back.
5" long Plain Ends
PINNED SCROLL & FRET SAW BLADES
For machines that require 5" pinned blades. Perfect for Sears
Craftsman, Penn State, Delta, Ryobi,
all 15" and 16" imported scroll saws.
Expanded
5" Between Pins
Offering!
PITCH #
THICKNESS
WIDTH
TPI
STOCK #
2/0
0
1
2
3
4
5
7
.011
.011
.012
.013
.024
.024
.025
.029
50
50
46
43
FS51110 0
FS511010
FS511011
FS511012
.014
.015
.016
.019
.031
.034
.035
.048
41
38
33
28
FS511013
FS511014
FS511015
FS511016
TOOTH STYLES
THICKNESS
WIDTH
TPI
STOCK #
REG.
HOOK
REG.
REG.
SKIP
.018
.018
.018
.018
.010
.100
.100
.100
.100
.070
20
7
15
10
18.5
FS405P
FS410P
FS411P
FS412P
FS424P
22 PC. FRET SAW BLADE ASSORTMENT
D
Fret Saw Blades & Frames
Assortment of popular style blades with storage pouch.
Contains: 4 pc. each of the following Blitz wood blade sizes: 1, 3, 5, 7, 9 and
1 pc. each of the following Finis metal blade sizes: 1 & 3
STOCK # FS540020
SAW FRAMES & BLADES
End Screws
End Screws
Flat Wire
JUNIOR HACK SAW
COPING SAW FRAME
with Blade Tensioning End Screw.
Cut wood, plastic and metal. Compact for easy
portability and storage in tool box. Comfortable
handle, sturdy, rigid frame. 2-3/8" depth of cut.
Uses any Mini Hack Saw blade.. . . . . FS63546
with Unique Blade Tensioning End Screw.
This is sturdy, professional saw. Blades can be
turned 360O to saw in any direction – push or
pull stroke. Depth of cut – 4-3/4". Hard wood
handle. Equipped with 15 TPI blade. Uses any
Coping Saw Blade .. . . . . . . . . . . . . . FS63510
• 1 per pack
• 1 per pack
MINI HACK SAW BLADES
5-3/4" LONG BETWEEN PINS
Tubular
FLAT WIRE & TUBULAR
FRET SAW FRAMES
Two excellent saws for detailed marquetry and
scroll work where great depth is required. Uses
5" fret, scroll, jewelers and spiral saw blades.
Rigid Flat Wire Frame and the more economical
Tubular Steel Frame keep blades taut for pull or
down stroke sawing. Handles can be folded
between frame ends for storage.
Flat Wire Frame . . . . . . . . . . . . . . . . FS63507
Tubular Frame. . . . . . . . . . . . . . . . . . FS63505
• 1 per pack
COPING SAW BLADES
MATERIAL
WIDTH
THICKNESS
TPI
STOCK #
6-1/2" LONG BETWEEN PINS
Wood Cutting
.250"
.015"
15
FS63602
MATERIAL
WIDTH
THICKNESS
TPI
STOCK #
Metal / Plastic
.250"
.015"
32
FS63603
Fine
.125"
.020"
20
FS303
Metal Cutting
.250"
.015"
52
FS63604
Medium
.125"
.020"
15
FS304
Extra Fine
.090"
.018"
24
FS308
Ceramic Tile
Tungsten Carbide Grit
• 1 Gross (144 blades) / pack
FS63605
• 1 Gross (144 blades) / pack
D-35
HAND SAWS
SWEDISH STEEL • HIGH QUALITY
A toolbox saw with very fine teeth for smooth sawing
in a wide variety of materials including aluminum,
plastics, laminates, wood and chipboard. Screwed
plastic handle.
14
HS300
For medium thick materials, such as plywood, ordinary
wood, fibre and chipboard or plastics. Hardpoint saw
with substantially thicker blade results in less power
consuming side vibrations. Screwed, one-piece twocomponent handle, placed lower down on the blade,
provides even distribution of power along the toothline.
16
HS2500
TYPE
Toolbox
Anti friction, anti rust coated
2
02
HS260
D
Hand Saws
The Classic
The classical base of the traditional handsaw range.
Equipped with an ornamented, stained beech handle.
Wide blade with resharpenable teeth.
26
STOCK #
14
15/16 HS30014
16
11/12 HS250016
19
8/10 HS250019
22
9/10 HS250022
(coated blade)
22
9/10 HS260022
Classic
26
7/8
Popular
For medium thick materials, such as timber of common
sizes, plywood, fiber and chipboard. Hardpoint saw
with substantially thicker blade results in less power
consuming side vibrations. Bevel ground teeth on
thick blade for high precision and straight cutting with
exceptionally good stability. Low-friction, rust-protective coating. Screwed, one-piece two-component
handle, placed lower down on the blade, provides
even distribution of power along the toothline.
BLADE
LENGTH T.P.I.
Superior
HS27726
• 1 per pack / 4 per carton
HS277
BLITZ BACK SAW
FLUSH CUT SAW
Eberle
Germany
DESCRIPTION
STOCK #
Set as shown above Contains:
1 slitting saw blade, 1 blade for metal,
1 blade for wood and plastic
SB67036
Flexible steel blade, without teeth set, permits cutting right
at the surface without marring it. Ideal for flush cutting
dowels, tenons, pegs and trimming. Made in Japan.
REPLACEMENT BLADES
Wood
Metal
Metal
Metal
Metal
0.35mm - 20T
0.50mm - 20T
0.60mm - 20T
0.70mm - 20T
0.80mm - 20T
SB67037
SB67038
SB67039
SB67040
SB67041
BLADE
LENGTH
T.P.I.
STOCK #
5-3/4"
22
SB67042
• 1 per pack
• 1 per pack
KEYHOLE & TRIM SAWS
SAW TYPE
STOCK #
KEYHOLE SAW
SB67043
TRIM SAW
SB67044
• 1 per pack
D-36
KEYHOLE SAW
These saws, 11TPI, 8" blade mounted into a 4-1/2" Oak handle
cut fast on the pull stroke. The narrow keyhole blade makes
very small radius cuts possible. Made in Japan.
TRIM SAW
This small key keyhole saw is perfect for cutting roughness
or removing stock in tight areas. Particularly useful for
the trimming and fixing of joints. 18TPI, 4-3/4" blade.
Made in Japan.
BOW SAWS / BLADES
A LIGHTWEIGHT HEAVY-DUTY SAW FOR ALL-ROUND USE
• This is the bow saw of choice for wood and wood-like materials.
• It is made from high-quality steel and protected from rust and corrosion
by a coating of high-impact, orange enamel paint.
1
Special cross section bow.
2
Taut blade.
3
Hand guard grip.
4
Wide clearance between blade and bow.
5
Blade guard when not in use.
BOW SAWS
TYPE
Professional
General purpose
BLADE
LENGTH
STOCK #
21"
24"
30"
36"
21"
BS921
BS924
BS930
BS936
BS33121
9 Series – Professional
D
Bow Saws / Carbide Scrapers
BOW SAW BLADES
Peg teeth
Raker teeth
21"
24"
30"
36"
21"
24"
30"
36"
331 Series – General purpose
BS5121
BS5124
BS5130
BS5136
BS2321
BS2324
BS2330
BS2336
51 Series – Dry seasoned wood,
Induction hardened peg teeth
• Pack: Bow Saw, 1 per pack
Bow Saw blades, 10 per pack
CABINET SCRAPER
BLADES
23 Series – For green timber,
Induction hardened raker teeth
CARBIDE SCRAPERS
TUNGSTEN CARBIDE BLADES
ERGONOMIC GRIPS
• Use on all kinds of surfaces: Wood, metal, concrete, to remove
paper, glue, varnish and unwanted finish.
• Double edged carbide blades are precision ground to a slight curve.
SB440
SB450
SB448
For achieving a silky smooth finish on
any surface – particularly twisted or
curved forms.
CARBIDE SCRAPERS
DESCRIPTION
STOCK #
TYPE
Straight
SB44710
French Curve
SB44720
General purpose
Three edged carbide
Push pull
Corner
SB44730
set of 3
SB44740
• 1 per pack
BLADE LENGTH
STOCK #
2"
1"
2-1/2"
SB440
SB448
SB450
SPARE BLADES
For type SB440
For type SB448
For type SB450
Pack: Scraper, 1 per pack / 5 per carton
Spare blades, 10 per pack
SB442
SB449
SB451
D-37
COUNTERSINKS
HIGH SPEED STEEL
FIVE FLUTE – 82O
SINGLE FLUTE – 82O
1/4" HEX SHANK
STRAIGHT SHANK
BODY
DIA.
SHANK
DIA.
3/8"
1/2"
5/8"
3/4"
1/4"
1/4"
1/4"
1/4"
Hex
Hex
Hex
Hex
CUTTER
DIA.
SHANK
DIA.
OVERALL
LENGTH
STOCK #
3/16"
1/4"
5/16"
3/8"
3/16"
1/4"
1/4"
1/4"
1-1/2"
2"
2"
2"
CSF50521
CSF50522
CSF50523
CSF50524
1/2"
5/8"
3/4"
7/8"
1/4"
1/2"
1/2"
1/2"
2"
2-3/4"
2-3/4"
2-3/4"
CSF50525
CSF50526
CSF50527
CSF50528
1"
1-1/4"
1-1/2"
2"
1/2"
3/4"
3/4"
3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
CSF50529
CSF50530
CSF50531
CSF50532
STOCK #
BULK
CARDED
C5F50561
C5F50562
C5F50563
C5F50564
C5F50561C
C5F50562C
C5F50563C
C5F50564C
• 1 per pack
Countersinks, Rasp, Gimlets, Routers
D
HAND COUNTERSINKS
• Bulk 3/16" to 3/8", 12 per pack
1/2" to 7/8", 3 per pack
1" to 2," 1 per pack
Handy 5 flute, 90O countersink with wood handle – 1/2" diameter.
Stock # CSF50566
GIMLETS
ROTARY RASP / FILE SET
Handy power cutters
for small filing jobs
1/4" diameter shank
Stock # RR6
6 Pc. Set
The perfect tool to start a hole by hand. Great for making
holes for fasteners in drywall. For use in wood or plastic.
contains:
3 rasps for wood
2 files for non-ferrous metal
1 countersink 1/2"
contains one each:
Dia. 5/32", 1/8", 3/16", 1/4" and 5/16"
Stock # GS105
5 Pc. Set
DRILL ROUTERS
SUPER HIGH SPEED STEEL
135O SPLIT POINT
The all purpose Drill Routers for use on
wood, plywood plastic and metal.
WITH
1/4" POWER
HEX SHANK
2" cutting, sawing and reaming section
2" cutting, sawing and reaming section
REGULAR SHANK
STOCK #
SIZE
1/4"
1/4"
FINISH
REGULAR
TiN COATED
• Card 1 per card
D-38
ENVELOPED
DSH50113
DSH50113TN
CARDED
DSH50113C
DSH50113TNC
STOCK #
SIZE
FINISH
1/4"
1/4"
REGULAR
TiN COATED
• Card 1 per card
ENVELOPED
CARDED
DS50113
DS50113TN
DS50113C
DS50113TNC
WOODWORKER’S SHOP AIDS
FLAT LEG DIVIDERS & CALIPERS
WING DIVIDERS
LEG
SIZE
DIVIDER
OUTSIDE
CALIPER
INSIDE
CALIPER
4"
6"
8"
10"
12"
HT10130
HT10132
HT10134
HT10136
HT10138
HT10120
HT10122
HT10124
HT10126
HT10128
HT10110
HT10112
HT10114
HT10116
HT10118
Heavy duty divider
with cast alloy
body, hardened
steel points,
fully polished
& nickel plated.
Expanded
Offering!
• 1 per pack
CS06
ALL STEEL
PRECISION
TRI
SQUARES
BLADE
LENGTH
BEAM
LENGTH
STOCK #
2"
3"
4"
6"
9"
12"
1-1/2"
2-1/2"
3"
4"
6"
8"
TS10153
TS10154
TS10155
TS10156
TS10157
TS10158
• 1 per pack
• All sets are matched and numbered.
• 90O Vee in center is true.
• Accurately machined square and parallel.
• High quality cast iron.
L
3"
4"
5"
1-3/4"
2-1/4"
2-1/2"
6"
3-1/8"
7"
3-1/2"
8"
4"
• 1 per pack
6"
8"
10"
12"
• 1 per pack
HT10142
HT10143
HT10144
HT10145
CS12
COMBINATION SQUARES
Stainless Steel Blade
Die Cast Head
STOCK #
8" Professional (USA)
6" Rosewood (UK)
9" Professional (UK)
12" Professional (UK)
TS10160
TS10161
TS10162
TS10163
DESCRIPTION
STOCK #
6" Pocket Combo Square
12" Combination Square
16" Combination Square
CS06
CS12
CS16
• 1 per pack
• 1 per pack
MG001
SB06
MG002
SB07
MG003
H
TH
TYPE
STOCK #
8" Urethane Body
Made in USA
SB06
7-1/2" Rosewood Body
Made in UK
SB07
9" Rosewood Body
Made in UK
SB08
10-1/2" Rosewood Body
Made in UK
SB10
• 1 per pack
MARKING GAGES
TYPE
STOCK #
Traditional Beechwood
Carpenters Gauge
MG001
Deluxe Rosewood
Marking Gauge (UK)
MG002
Combination Rosewood
Marking / Mortising
Gauge (UK)
MG003
• 1 per pack
STOCK #
2-3/8" 1-5/16" VB67633
2-5/8" 1-5/8" VB67634
3-1/8"
2"
VB67635
3-1/2"
4-1/2"
5-1/2"
2-1/2"
3"
4"
VB67636
VB67637
VB67638
6-FT. FOLDING RULES
DESCRIPTION
SCRIBER
DESCRIPTION
Tungsten Carbide
Scriber & Magnet
6" OAL
• 1 per pack
CS16
SLIDING BEVELS
VEE
BLOCK
SETS
W
DESCRIPTION
STOCK #
STOCK #
S67612
SWANSON SPEED
SQUARES
TYPE
STOCK #
Aluminum Die Cast
SS101
Hi-Impact Plastic Yellow
SS102
Hi-Impact Plastic Orange
SS103
• 1 per pack
STOCK #
CARPENTER'S FOLDING RULES
Regular (2-way reading)
Flat (Inside 1-way reading)
FR0111
FR0112
MASON'S FOLDING RULES
Standard Brick Rule
Oversize Brick Rule
Modular Brick Rule
• 1 per pack
FR0113
FR0114
FR0115
D-39
D
Woodworker’s Shop Aids
• Made from high quality tool steel.
• Squares have true right angles inside and
outside.
• Beams and blades are precision ground.
• Blade is hardened.
• Length of the blade is measured from inner
edge of the beam to end of the blade.
GRADUATED
TRI SQUARES
LEG SIZE
WOODWORKING PLANES
MADE IN ENGLAND
The traditional tool for finishing wood, giving the extreme smoothness and flatness demanded by the
craftsman. Made of fine grained grey iron casting, the body is CNC machined for accuracy, strength
and balance. The contoured handle and knob enable comfortable control during use.
JACK PLANE
WP1400
The Jack Plane with its longer sole produces a very flat surface.
This plane features a micro depth adjustment mechanism, a
quick release lever cap and a lateral adjustment for outstanding
control. Like all fine woodworking tools, this plane is a pleasure
to use. Jack Plane measures 14" long
SMOOTHING PLANE
Woodworking Planes
D
WP0934
The Smoothing Plane is the workhorse in the shop. Designed to
smooth rough-sawn lumber, it is also the tool of choice for planing
doors and windows as well as other planing chores around the
shop. Hardwood handle and knob provide tremendous control.
Smoothing Plane measures 9-3/4" long.
BLOCK PLANE
WP0678
This low angle Block Plane is perfect for trimming across the grain
as well as with the grain for perfect fits. Precision milling and
accurate adjustment mechanisms make this plane the perfect tool
for on the job or in the shop. Block Plane measures 6-7/8" long.
SPOKE SHAVES
WP004
A handy shaping tool for curved surfaces. Manufactured in two
models: Concave and Convex. The body is cast from malleable
iron, and the tungsten vanadium cutter with lateral and vertical
adjustment is secured by a lever cap and two retaining screws to
eliminate chatter.
PLANES
TYPE
STOCK #
14" Jack Plane
WP1400
9-3/4" Smoothing Plane
WP0934
6-7/8" Block Plane
WP0678
Spoke Shaves
Convex Curves
Concave Curves
D-40
PLANE IRONS
WP004
WP005
TYPE
For Jack Planes and
Smoothing Planes
Single Iron
Double with Cap Iron
STOCK #
WPS12
WPD12
For Block Plane
WPO220D
For Convex and Concave
Spoke Planes
WPA151B
• Individually enveloped
THREAD INSERTS FOR WOOD / PLASTICS
For wood and plastics
For cored or drilled holes in plastics
Inch
Dimensions
HEADLESS TYPE
INTERNAL
A
THREAD ±010
B
±004
L
STARTING
±010 HOLE SIZE
STOCK #
BRASS STAINLESS
.094
.125
.156
.104
.135
.166
.125
.156
.188
3/32
1/8
5/32
TIB67401
TIB67402
TIB67403
—
TIS67422
TIS67423
6-32
8-32
10-32
.187
.218
.250
.199
.230
.262
.250
.313
.375
3/16
7/32
1/4
TIB67404
TIB67405
TIB67406
TIS67424
TIS67425
TIS67426
10-24
1/4-20
5/16-18
.250
.312
.375
.262
.326
.389
.375
.500
.563
1/4
5/16
3/8
TIB67407
TIB67408
TIB67409
—
TIS67428
TIS67429
3/8-16
M3-0.5
M3.5-0.6
.437
.156
.187
.451
.166
.199
.625
.188
.250
7/16
5/32
3/16
TIB67410
TIB67411
TIB67412
TIS67430
—
—
M4-0.7
M5-0.8
M6-1.0
.218
.250
.312
.230
.262
.326
.313
.375
500
7/32
1/4
5/16
TIB67413
TIB67414
TIB67415
—
—
—
HEAD TYPE
INTERNAL
A
THREAD ±010
B
±004
L
STARTING
±010 HOLE SIZE
STOCK #
BRASS STAINLESS
2-56
4-40
6-32
.187
.218
.249
.135
.166
.199
.156
.188
.250
1/8
5/32
3/16
TIB67441
TIB67442
TIB67443
TIS67461
TIS67462
TIS67463
8-32
10-32
1/4-20
.280
.312
.375
.230
.262
.326
.313
.375
.500
7/32
1/4
5/16
TIB67444
TIB67445
TIB67446
TIS67464
TIS67465
TIS67466
Inch
Dimensions
INTERNAL
THREAD
A
B
C
STOCK #
BRASS ALUMINUM
STARTING
HOLE SIZE
TYPE 170 – 1 FIN
6-32
8-32
10-32
.210
.236
.263
.237
.263
.290
.189
.215
.242
#5
15/64
G
TIB67461
TIB67462
TIB67463
TIA67481
TIA67482
TIA67483
6-32
8-32
10-32
.210
.236
.263
.237
.263
.290
.189
.215
.242
#5
15/64
G
TIB67464
TIB67465
TIB67466
TIA67484
TIA67485
TIA67486
10-24
1/4-20
.263
.330
.290
.357
.242
.309
G
21/64
TIB67467
TIB67468
TIA67487
TIA67488
10-32
1/4-20
5/16-18
.347
.409
.471
.368
.431
.493
TIB67469
TIB67470
TIB67471
TIA67489
TIA67490
TIA67491
TYPE 370 – 3 FIN
.318
.381
.443
11/32
13/32
15/32
• 25 per pack
• 25 per pack
DOWEL & TENON CENTERS
DOWEL CENTERS
DOWEL & TENON CENTERS
Dowel centers are used to locate a hole in relationship to the location
of another hole. Just drill a hole in one piece and insert the dowel
center. Place the other piece on the center and gently mark with the
center point. Drill other hole for exact location. can be used on wood,
leather, and other soft material.
The difference between these dowel/tenon centers and standard
dowel centers is that the dowel/tenon centers have a bored I.D.
with a machined internal marking point in addition to the external
marking point. This additional feature lets the user do both
internal and external markings with the same tool. Four popular
sizes for most applications. Rust-proof plated finish. These
centers have many uses not previously possible. Available in a
complete set, two of each size with a handy storage box or
individually in a set of two.
SIZE
STOCK #
1/4"
5/16"
3/8"
1/2"
9/16"
DC11
DC12
DC13
DC15
DC17
SIZE
STOCK #
• 12 per pack
SETS
O.D.
I.D.
1/4"
5/16"
3/8"
1/2"
3/16"
1/4"
5/16"
3/8"
DC30
DC31
DC32
DC33
• 1 pair per pack
8 Pc. Set Contains 2 each:
1/4", 5/16", 3/8", 1/2"
in polybag
DC20
1/4", 5/16", 3/8", 1/2"
in plastic box
DC21
• 1 per pack
D
TYPE 270 – 2 FIN
SET
1/4", 5/16", 3/8", 1/2"
in polybag
• 1 per pack
DC35
D-41
Thread Inserts
Dowel & Tenon Centers
0-80
2-56
4-40
WALL DISPLAYS
AN ASSORTMENT OF WOOD TOOL DISPLAYS
(Each display includes wire rack and header card)
30 Pc. WOOD SPADE BIT
DISPLAY STOCK # WSB61193
Contains 5 each:
3/8" WSB61157P
3/4" WSB61163P
1/2" WSB61159P
7/8" WSB61165P
5/8" WSB61161P
1"
WSB61167P
Contains 5 each:
3/8" WSB61182P
3/4" WSB61185P
1/2" WSB61183P
7/8" WSB61186P
5/8" WSB61184P
1"
WSB61187P
Bits in individual pouch
• 1 per box
• 1 per box
D
Wall Displays
36 Pc. BRAD POINT DRILL
Super Wear Resistant CV Alloy Steel • Fractional Sizes
DISPLAY STOCK # BPW36
16" Overall Length • 1/4" Hex Shank
Contains:
6 each
1/8"
BPW61103P
5/16"
5/32" BPW61105P
3/8"
3/16" BPW61107P
7/16"
1/4"
BPW61110P
1/2"
Contains 3 each:
3/8"
1/2"
5/8"
WSB61173P
WSB61174P
WSB61175P
3/4"
7/8"
1"
WSB61176P
WSB61177P
WSB61178P
3 each
BPW61111P
BPW61112P
BPW61113P
BPW61114P
Drills in individual pouch
• 1 per box
• 1 per box
16 Pc. SHIP AUGER BIT
8 Pc. AUGER BIT
8" OAL, 6" Flute Length • Hexagonal Shank
18" OAL, 12" Flute Length
DISPLAY STOCK # AUG16
DISPLAY STOCK # AUG8
Contains 2 each:
1/2"
AUG61209P
3/4"
9/16" AUG61211P
13/16"
5/8"
AUG61216P
7/8"
11/16" AUG61221P
1"
AUG61226P
AUG61231P
AUG61236P
AUG61246P
1/2"
9/16"
5/8"
11/16"
• 1 per box
30 Pc. JIG SAW BLADE
24 Pc. RECIPROCATING SAWS
x
x
x
x
18 TPI
14 TPI
18 TPI
24 TPI
1/2" Shank
1/4" Universal Shank
DISPLAY STOCK # RSBM24
DISPLAY STOCK # JSBM30
Contains 3 pouches each:
RSBM418P
6" x 6 TPI
RSBM614P
6" x 6 TPI
RSBM618P
9" x 6 TPI
RSBM624P
6" x 6 TPI
Contains 5 cards each:
RSBM66P
RSBM556P
RSBM96P
RSBM66WP
4" x 6 TPI
3-5/8" x 6 TPI
4" x 10 TPI
D-42
JSBM4386C
JSBM3588C
JSBM43810C
2-3/4" x 14 TPI JSBM23414C
2-3/4" x 18 TPI JSBM23418C
2-3/4" x 24 TPI JSBM23424C
1 Blade per card
5 Blades per pouch
• 1 per box
AUG61326P
AUG61331P
AUG61336P
AUG61346P
• 1 per box
4"
6"
6"
6"
Contains 1 each:
AUG61309P
3/4"
AUG61311P
13/16"
AUG61316P
7/8"
AUG61321P
1"
• 1 per box
E
Screw Driving
Tools
Screw Driving Accessories
Screwdrivers & Nut Drivers
Screwdriver Bits Information Chart . . . . . E2-3
Quick Change Screwdrivers . . . . . . . . . . E18 - 20
Insert Bits . . . . . . . . . . . . . . . . . . . . . . . E4-6
Quick Change Electronic Screwdriver . . E21
Power Bits . . . . . . . . . . . . . . . . . . . . . . . E4-6
Rachet Screwdriver . . . . . . . . . . . . . . . . E21
Bit Holders . . . . . . . . . . . . . . . . . . . . . . E7
Sockets . . . . . . . . . . . . . . . . . . . . . . . . . E7
The Telescopic Vari-Driver . . . . . . . . . . . E22
19 Pc. Vari-Driver Kit . . . . . . . . . . . . E22
Hex Socket Extensions . . . . . . . . . . . . . E7
Quick Lock Bit Holder / Driver . . . . . . . . E23
Nut Setters . . . . . . . . . . . . . . . . . . . . . . E8
Magnetic Screwdriver . . . . . . . . . . . . . . E23
Hangerbolt Driver . . . . . . . . . . . . . . . . . E8
Electrician’s Screwdriver . . . . . . . . . . . . E24
Insert Bit Dispensers, Kits & Sets
Dispensers . . . . . . . . . . . . . . . . . . . E9
Jars, Magazines, Sets . . . . . . . . . . . E10
Super Slim Electronic Screwdriver . . . . . E24
Specialty Tools & Sets
Drywall Screw Stopper . . . .
Insert Bit “Chew Cans” . . . .
The Handy-Driver Kit . . . . . .
Bit Blocks . . . . . . . . . . . . . .
Screwdriver Kits & Sets . . . .
Handypac® Assortments . . . .
Flexible Shaft Socket Drivers
Magnetic Retriever . . . . . . .
“Screw-Out®” . . . . . . . . . . . .
ScrewTech Screwdrivers . . . . . . . . . . . E26 - 27
Hardwood Grip Screwdriver . . . . . . . . . . E25
E
Nut Drivers . . . . . . . . . . . . . . . . . . . . . . E25
®
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
E11
E11
E11
E12
E12
E13
E14
E14
E14
Torx® Drivers for Carbide Inserts . . . . E15
Screws for Carbide Inserts . . . . . . . E15
Opticraft® Screwdrivers . . . . . . . . . . . . . E28
Professional Screwdriver Sets . . . . . . . . E29
Wall Displays . . . . . . . . . . . . . . . . . . . . . E30
Screwdriver Dispensers . . . . . . . . . . . . . E31
ScrewTech® Dial-A-Bit Dispensers . . . . . E31
Monolock™ All-Purpose Tool Kit . . . . . . . E32
Stock No.
SCD204H
No.2
Keys
Hex Keys & Sets . . . . . . . . . . . . . . . E16 - 17
Ball Hex Drivers . . . . . . . . . . . . . . . E17
7
3 ––
5 ––
16 32
9 ––
32
––
10
8
7
6 5.5
5
4.5
15 KEYS
METRIC SIZES
SHORT ARM SERIES
INDUSTRIAL QUALITY
CHROME VANADIUM STEEL
4
3
0.7
0.050
3
–
8
0.9
1.3
1.5
0.035
5
––
16
2
0.028
1
–
4
15 KEYS
INCH SIZES
LONG ARM SERIES
2.5
1 64
7 –
3 –– 8
64
5 ––
32
1 ––
––
64
16
SCREW-OUT
E-1
SCREWDRIVER BITS INFORMATION CHART
SCREWDRIVER BITS USAGE
BY INDUSTRY
Bit
Configuration
Automotive Aviation Appliance Furniture
Construction/ Public
Rec./
Drywall/
Electronics HVAC
Marine Security
Decking
Trans.
Hobby
Subfloor
Phillips®
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Slotted
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
TORX
✓
✓
✓
®
®
✓
Tamper Proof
✓
✓
✓
✓
✓
Tri-Wing
✓
POZIDRIV ®
✓
✓
Square Recess (Robertson)
✓
Quadrex *
✓
®
✓
✓
✓
✓
✓
✓
✓
Spanner
Hex socket ( Allen)
Screwdriver Bits Information Chart
E
✓
✓
✓
®
Machine
Tools/Metal
✓
✓
✓
Screwdriver Inserts & Power Bits are made from AISI S-2 steel, heat treated to
HRC58 – HRC62. ACR® bits have Anti Cam-out Ribs which allow precision fit and resist slippage.
FINDING THE RIGHT SCREWDRIVER BIT
Insert Bits are compact bits that are economical, change over quickly
and require less storage space. They are 1" OAL with 1/4" hex shank
and 1-1/4", 1-1/2" OAL with 5/16" shank.
Power Bits fit directly into the power tool for improved concentricity
and easier clearance. They are 1-15/16" - 6" or longer OAL with 1/4"
hex shanks.
Hex
Shank
Snap Ring Notch
Hex
Shank
Body
Point
Power groove engages
with a spring loaded
metal ball
inside the driver
ACR Tip
Point
TIP STYLES
Phillips®
Slotted
Torx®
Square
Hex Socket
Recess
®
Robertson
Hex Socket
w/Pin
Tri-wing®
Pozidriv®
Torx w/Pin
Spanner
Phillips
Square Driv®
Quadrex®
• Tri-Wing®, POZIDRIV®, Phillips Square Driv® and Phillips® are registered trademarks of the Phillips Screwdriver Company.
• Quadrex® is a registered trademark of Isotech Consultants, Inc.
• Torx® is a registered trademark of Camcar Division of Textron.
E-2
SCREWDRIVER BITS INFORMATION CHART
Locate the size and type of screw you will be driving in the chart below,
then move to the left column to find the point size you need.
PHILLIPS
WOOD SCREW SIZE
POINT
SIZE
0
1
2
3
4
FLAT,
OVAL
0
2, 3, 4
5, 6, 7, 8, 9
10, 14, 16
18, 20, 24, 1/2"
MACHINE SCREW SIZE
ROUND
FLAT, OVAL,
BINDING
ROUND,
FILLISTER
0
2, 3, 4
5, 6, 8, 10
12, 1/4", 5/16"
1/8", 3/8", 7/16"
0
2, 3, 4
5, 6, 8, 10
12, 1/4"
5/16", 7/16", 1/2"
0
2, 3, 4
5, 8, 10
12, 1/4"
3/8", 7/16"
SLOTTED
MINIMUM
MAXIMUM
0.019
0.023
0.027
0.031
0.035
0.039
0.045
0.056
0.026
0.031
0.035
0.039
0.043
0.048
0.054
0.067
TORX®
TORX®
POINT SIZE
T6
T7
T8
T9
T10
T15
T20
T25
T27
T30
T40
T45
T50
T55
FLAT, OVAL, ROUND,
STOVE-BINDING
0
2, 3, 4
5, 6, 7
12, 1/4"
5/16"
0, 1
2, 3, 4
5, 6, 7, 8, 10
12, 14
—
TORX®
DIA.
0.065
0.077
0.090
0.097
0.107
0.128
0.151
0.173
0.195
0.216
0.260
0.306
0.346
0.440
SQUARE RECESS
TAPPING
POINT SIZE
SCREW SIZE
0
1
2
3
WOOD
MACHINE
SCREW SIZE SCREW SIZE
3, 4
5, 6, 7
8, 10
12, 14
3, 4
5, 6, 7
8, 9, 10
12, 14
3, 4
5, 6
8, 10
12, 14
E
HEX SOCKET
SAE Fractional
POINT
SIZE
SOCKET HEAD
CAP SCREW SIZE
SET SCREW
SIZE
5/64"
3/32"
7/64"
1/8"
5/32"
3/16"
7/32"
1/4"
5/16"
3/8"
2, 3
4, 5
6
—
10
1/4"
—
5/16"
3/8"
7/16", 1/2"
8
10
—
1/4"
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
Screwdriver Bits Information Chart
1-2
2-3
3-4
4-5
6-8
8 - 10
10 - 12
12 - 14
TRUSS, BRAZIER,
BUTTON
SQUARE RECESS
SCREW SLOT WIDTH
SLOTTED
POINT SIZE
SHEET METAL SCREW SIZE
Metric
M2.0
M2.5
M3.0
M4.0
M5.0
M6.0
M2.3, 2.5, 2.6
M3
M4
M5
M6
M8
M4
M5
M6
M8
M10
M12, 14
General Information:
Nutsetters
Popular for the pre-engineered building industry. For use with Hex Head Screws.
1/4" Hex Shank.
Bit Holders
To be used in conjunction with insert bits. Has “C” Ring retainer and is magnetic.
One or two piece construction.
Extensions/
Socket Adapters
Adapts a handdriver or drill into a socket wrench.
E-3
INDUSTRIAL SCREWDRIVER BITS
PHILLIPS SQUARE DRIV® QUADREX® BITS
PHILLIPS - SQUARE COMBO WITH ACR®
Two most popular tip styles combination with
ACR® (anti-cam-out) technology:
• Extends tool life.
• Lowers worker fatigue.
ACR® Ribbing
ensures
maximum
efficiency
• Eliminates slippage in the screw.
• Has an improved “stick fit”.
• Makes it easier to drive screws.
POINT
SIZE
OAL
DESCRIPTION
PSD2-2
1"
Phillips Square Driv Quadrex Bit
BULK
STOCK #
CARDED
1/4" HEX SHANK INSERT BITS
®
HSB16091
HSB16091C
1/4" HEX SHANK POWER BITS
E
1-15/16"
3-1/2"
®
®
Screwdriver Bits
PSD2-2
PSD2-2
HSB16092
HSB16093
HSB16092C
HSB16093C
REDUCED BODY - DRYWALL
®
PHILLIPS
Expanded
Offering!
INSERT BITS
POINT
SIZE OAL
STOCK #
BULK
CARDED
ACR BITS
POINT
SIZE OAL
1/4" HEX SHANK
#0
#1
#2
#3
#3
#2
1"
1"
1"
1"
1-1/4"
5-1/2"
HSB15801
HSB15802
HSB15803
HSB15804
HSB15807
HSB15863
HSB15801C
HSB15802C
HSB15803C
HSB15804C
HSB15807C
–
1"
1"
HSB15806
HSB15805
HSB15806C
HSB15805C
STOCK #
BULK
CARDED
#1
#2
#3
1"
1"
1"
HSB26110
HSB26111
HSB26112
HSB26110C
HSB26111C
HSB26112C
REDUCED BODY – DRYWALL
#2R
1"
HSB26113
HSB26113C
1/4" HEX POWER SHANK BITS
#1
#2
#3
2"
2"
2"
HSB26114
HSB26115
HSB26116
HSB26114C
HSB26115C
HSB26116C
5/16" HEX SHANK
#1
#2
#3
1-1/4"
1-1/4"
1-1/4"
HSB16021
HSB16022
HSB16023
HSB16021C
HSB16022C
HSB16023C
Quick Change Chuck Information.
E-4
POINT
SIZE
Standard Pack
Bulk - 25 Per Pack
Carded Insert Bits - 2 Per Card
Power Bits - 1 Per Card
Double End Bits - 1 Per Card
OAL
STOCK #
BULK
CARDED
1/4" HEX POWER SHANK BITS
1/4" HEX SHANK INSERT BITS
REDUCED BODY – DRYWALL
#1R
#2R
POWER BITS
®
#1
#2
#3
#1
#2
#3
#1
#2
#3
#3
#1
#2
#3
#1
#2
#3
#1
#2
#3
2"
2"
2"
2-3/4"
2-3/4"
2-3/4"
3"
3"
3"
3-1/2"
4"
4"
4"
5"
5"
5"
6"
6"
6"
HSB15845
HSB15846
HSB15847
HSB15848
HSB15849
HSB15850
HSB15851
HSB15852
HSB15853
HSB15853A
HSB15854
HSB15855
HSB15856
HSB15857
HSB15858
HSB15859
HSB15860
HSB15861
HSB15862
HSB15845C
HSB15846C
HSB15847C
HSB15848C
HSB15849C
HSB15850C
HSB15851C
HSB15852C
HSB15853C
HSB15853AC
—
—
—
—
—
—
—
—
—
Expanded
Offering!
POZIDRIV®
SLOTTED
TORX®
INSERT BITS
INSERT BITS
INSERT BITS
STOCK #
BULK
CARDED
POINT
SIZE OAL
1"
1"
1"
HSB15832
HSB15833
HSB15834
#1
#2
#3
1-1/4"
1-1/4"
1-1/4"
HSB15832C
HSB15833C
HSB15834C
5/16" HEX SHANK
HSB16041
HSB16042
HSB16043
HSB16041C
HSB16042C
HSB16043C
POWER BITS
POINT
SIZE OAL
STOCK #
BULK
CARDED
#1 - 2
1"
#2 - 3
1"
#3 - 4
1"
#4 - 5
1"
#6 - 8
1"
#8 - 10 1"
#10 - 12 1"
#12 - 14 1-1/4"
HSB16052
HSB16053
HSB16054
HSB15808
HSB15809
HSB15810
HSB15811
HSB15812
HSB16052C
HSB16053C
HSB16054C
HSB15808C
HSB15809C
HSB15810C
HSB15811C
HSB15812C
5/16" HEX SHANK
#4 - 5
#6 - 8
#8 - 10
#10 - 12
#12 - 14
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
HSB16025
HSB16026
HSB16027
HSB16028
HSB16029
HSB16025C
HSB16026C
HSB16027C
HSB16028C
HSB16029C
2"
2"
2"
HSB15896
HSB15897
HSB15898
HSB15896C
HSB15897C
HSB15898C
POINT
SIZE OAL
STOCK #
BULK
CARDED
SQUARE RECESS
INSERT BITS
POINT
SIZE OAL
STOCK #
BULK
CARDED
1/4" HEX SHANK
#0
#1
#2
#3
1"
1"
1"
1"
HSB15814
HSB15815
HSB15816
HSB15817
HSB15814C
HSB15815C
HSB15816C
HSB15817C
POWER BITS
#1
#2
#3
2"
2"
2"
HSB15872
HSB15873
HSB15874
HSB15872C
HSB15873C
HSB15874C
#1
#2
#3
3"
3"
3"
HSB15875
HSB15876
HSB15877
—
—
—
#1
#2
#3
4"
4"
4"
HSB15878
HSB15879
HSB15880
—
—
—
#1
#2
#3
5"
5"
5"
HSB15881
HSB15882
HSB15883
—
—
—
#1
#2
#3
6"
6"
6"
HSB15884
HSB15885
HSB15886
—
—
—
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
#1 - 2
#2 - 3
#3 - 4
#4 - 6
#6 - 8
#8 - 10
#10 - 12
#12 - 14
#1 - 2
#2 - 3
#3 - 4
#4 - 6
#6 - 8
2"
2"
2"
2"
2"
2"
2"
2"
3"
3"
3"
3"
3"
HSB16055
HSB16056
HSB16057
HSB16058
HSB15864
HSB15865
HSB15866
HSB15871
HSB16059
HSB16060
HSB16061
HSB16062
HSB16063
HSB16055C
HSB16056C
HSB16057C
HSB16058C
HSB15864C
HSB15865C
HSB15866C
HSB15871C
HSB16059C
HSB16060C
HSB16061C
HSB16062C
HSB16063C
SLOTTED
WITH FINDER
3
HSB15867
HSB15867C
#8-10
#6 - 8
#8 - 10
#10 - 12
#8 - 10
2"
2"
2"
3"
HSB15868
HSB15869
HSB15870
HSB15867
HSB15868C
HSB15869C
HSB15870C
HSB15867C
Standard Pack
Bulk - 25 Per Pack
Carded Insert Bits - 2 Per Card
Power Bits - 1 Per Card
Double End Bits - 1 Per Card
HSB16065
HSB16066
HSB15820
HSB15821
HSB15822
HSB15823
HSB15824
HSB15825
HSB15826
HSB15827
HSB15828
HSB15829
HSB15830
T30
T40
T45
T47
T50
T55
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
HSB16065C
HSB16066C
HSB15820C
HSB15821C
HSB15822C
HSB15823C
HSB15824C
HSB15825C
HSB15826C
HSB15827C
HSB15828C
HSB15829C
HSB15830C
E
5/16" HEX SHANK
HSB16030
HSB16031
HSB16032
HSB16033
HSB16034
HSB16035
HSB16030C
HSB16031C
HSB16032C
HSB16033C
HSB16034C
HSB16035C
POWER BITS
POINT
SIZE OAL
STOCK #
BULK
CARDED
T10
T15
T20
T25
T27
T30
T40
T10
T15
T20
T25
T27
T30
T40
T10
T15
T20
T25
T27
T30
T40
T10
T15
T20
T25
T27
T30
T40
2"
2"
2"
2"
2"
2"
2"
3"
3"
3"
3"
3"
3"
3"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
HSB15888
HSB15889
HSB15890
HSB15891
HSB15892
HSB15893
HSB15894
HSB16067
HSB16068
HSB16069
HSB16070
HSB16071
HSB16072
HSB16073
HSB16074
HSB16075
HSB16076
HSB16077
HSB16078
HSB16079
HSB16080
HSB16081
HSB16082
HSB16083
HSB16084
HSB16085
HSB16086
HSB16087
HSB15888C
HSB15889C
HSB15890C
HSB15891C
HSB15892C
HSB15893C
HSB15894C
HSB16067C
HSB16068C
HSB16069C
HSB16070C
HSB16071C
HSB16072C
HSB16073C
—
—
—
—
—
—
—
—
—
—
—
—
—
—
E-5
Screwdriver Bits
#1
#2
#3
1/4" HEX SHANK
T4
T5
T6
T7
T8
T9
T10
T15
T20
T25
T27
T30
T40
POWER BITS
STOCK #
BULK
CARDED
POINT
SIZE OAL
1/4" HEX SHANK
1/4" HEX SHANK
#1
#2
#3
STOCK #
BULK
CARDED
POINT
SIZE OAL
HEX SOCKET
METRIC
HEX SOCKET
INSERT BITS
INSERT BITS
STOCK #
POINT
OAL
SIZE
BULK
1/4" HEX SHANK
5/64"
3/32"
7/64"
1/8"
5/32"
1"
1"
1"
1"
1"
HSB15836
HSB15837
HSB15838
HSB15839
HSB15840
5/32"
3/16"
7/32"
1/4"
5/16"
3/8"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
2.0
2.5
3.0
4.0
5.0
6.0
5/16" HEX SHANK
Screwdriver Bits
E
INSERT BITS 1-15/16" OAL
#2 Phillips - #8-10 Slotted
#2 Phillips - #10-12 Slotted
#2 Phillips - #2 Phillips
CARDED
1/4" HEX SHANK
HSB15836C
HSB15837C
HSB15838C
HSB15839C
HSB15840C
HSB16045
HSB16046
HSB16047
HSB16048
HSB16049
HSB16051
BULK
1"
1"
1"
1"
1"
1"
HSB16045C
HSB16046C
HSB16047C
HSB16048C
HSB16049C
HSB16051C
HSB16101
HSB16102
HSB16103
HSB16104
HSB16105
HSB16106
STOCK #
BULK
CARDED
POINT
SIZE
STOCK #
POINT
SIZE OAL
MM
CARDED
DOUBLE END BITS
HSB16101C
HSB16102C
HSB16103C
HSB16104C
HSB16105C
HSB16106C
Expanded
Offering!
HSB15902A HSB15902AC
POWER BITS 1-7/8" OAL
#2 Phillips #6-8 Slotted
#2 Phillips #1 Phillips
#2 Phillips #2 Sq. Recess
#2 Sq. Recess #1 Sq. Recess
HSB15901
HSB15902
HSB15903
HSB15904
HSB15905
HSB15906
HSB15907
HSB15908
HSB15909
HSB15901C
HSB15902C
HSB15903C
HSB15904C
HSB15905C
HSB15906C
HSB15907C
HSB15908C
HSB15909C
POWER BITS 2-1/2" OAL
#2 Phillips #2 Sq. Recess
#2 Phillips #8 Slotted
#2 Sq. Recess #1 Sq. Recess
HSB15913
HSB15914
HSB15915
HSB15916
HSB15913C
HSB15914C
HSB15915C
HSB15916C
TAMPER PROOF INSERT BITS
POINT
SIZE
OAL
BULK
STOCK #
CARDED
POINT
SIZE
TORX®
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
HSB15962
HSB15963
HSB15964
HSB15965
HSB15966
HSB15967
HSB15968
HSB15969
HSB15970
HSB15971
HSB15972
HSB15973
1"
1"
HSB15940
HSB15941
STOCK #
CARDED
HSB15940C
HSB15941C
3/32"
1/8"
9/64"
5/32"
3/16"
7/32"
1/4"
5/16"
1"
1"
1"
1"
1"
1"
1"
1"
HSB15975
HSB15976
HSB15977
HSB15978
HSB15979
HSB15980
HSB15981
HSB15982
OAL
TRI-WING
#1
#2
#3
#4
#5
#6
1"
1"
1"
1"
1"
1"
HSB15985
HSB15985C
HSB15986
HSB15986C
HSB15987
HSB15987C
HSB15988
HSB15988C
HSB15989
HSB15989C
Bulk
Carded Insert Bits
Power Bits
Double End Bits
-
BULK
STOCK #
CARDED
SPANNER
1/4" HEX SHANK
HSB15975C
HSB15976C
HSB15977C
HSB15978C
HSB15979C
HSB15980C
HSB15981C
HSB15982C
Standard Pack
E-6
POINT
SIZE
1/4" HEX SHANK
HSB15962C
HSB15963C
HSB15964C
HSB15965C
HSB15966C
HSB15967C
HSB15968C
HSB15969C
HSB15970C
HSB15971C
HSB15972C
HSB15973C
PHILLIPS
#2
#3
BULK
HEX SOCKET
1/4" HEX SHANK
TT5
TT6
TT7
TT8
TT9
TT10
TT15
TT20
TT25
TT27
TT30
TT40
OAL
25 Per Pack
2 Per Card
1 Per Card
1 Per Card
#4
#6
#8
#10
#12
#14
1"
1"
1"
1"
1"
1"
HSB15950
HSB15951
HSB15952
HSB15953
HSB15954
HSB15955
HSB15950C
HSB15951C
HSB15952C
HSB15953C
HSB15954C
HSB15955C
5/16" HEX SHANK
#4
#6
#8
#10
#12
#14
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
HSB15956
HSB15957
HSB15958
HSB15959
HSB15960
HSB15961
HSB15956C
HSB15957C
HSB15958C
HSB15959C
HSB15960C
HSB15961C
MAGNETIC BIT HOLDERS
SQ. DRIVE IMPACT SOCKETS
C
STOCK #
DESCRIPTION
BULK
CARDED
SOCKET
SIZE
Standard Duty
HSB66695
HSB66695C
3"
Heavy Duty
HSB66696
HSB66696C
3"
Extra Heavy Duty
with Retaining Ring
HSB66697
HSB66697C
6"
Extra Heavy Duty
with Retaining Ring
Heavy Duty
NOSE
DIA.
C
STOCK #
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
15/16"
15/16"
15/16"
1"
1"
1"
1/2"
1/2"
1/2"
5/8"
11/16"
3/4"
3/8"
7/16"
1/2"
9/16"
5/8"
3/4"
SDS018
SDS020
SDS022
SDS024
SDS026
SDS028
MAGNETIC 3/8" SQUARE DRIVE
HSB66698
—
1/4" DRIVE FOR 5/16" INSERT BITS
3-1/2"
BODY
DIA.
B
OAL
A
2-5/8"
B
Expanded
Offering!
STAINLESS STEEL
LENGTH
DRIVE
A
HSB66700
1/4"
5/16"
3/8"
7/16"
1/2"
HSB66700C
Extra Heavy Duty
with Retaining Ring
HSB66701
HSB66701C
3-1/16"
Extra Heavy Duty
with Retaining Ring
HSB66702
HSB66702C
7/16"
1/2"
9/16"
5/8"
3/4"
SDS030
SDS032
SDS034
SDS036
SDS038
1/4"
5/16"
3/8"
7/16"
1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
15/16"
15/16"
15/16"
15/16"
15/16"
7/16"
1/2"
9/16"
5/8"
3/4"
SDS040
SDS042
SDS044
SDS046
SDS048
E
METRIC – NON MAGNETIC 1/4" SQUARE DRIVE
4mm
5mm
6mm
• Bulk 10 per pack • Card 1 per card
3/4"
3/4"
3/4"
3/4"
15/16"
1"
1"
1"
15/32"
15/32"
15/32"
5/16"
5/16"
25/64"
SDS060
SDS062
SDS064
• 10 per pack
SQ. DRIVE BIT HOLDERS
HEX SOCKET EXTENSIONS
PIN / BALL ON MALE SQUARE
SQ. DRIVE
SIZE
INSERT BIT
HEX SIZE
OVERALL
LENGTH
STOCK #
1/4"
3/8"
3/8"
1/2"
1/2"
1/4"
1/4"
5/16"
1/4"
5/16"
1"
1-1/2"
1-1/2"
1-3/4"
1-3/4"
SDS050
SDS052
SDS054
SDS056
SDS058
• 10 per pack
FLEXIBLE BIT HOLDER
Flexible Extensions have heavy duty spiral ring
construction that retain flexibility for a longer tool life.
7-1/2" long for 1/4" Hex Inserts
• 10 per pack
Stock # HSB16050
HEX
SHANK
SQUARE
DRIVE
OAL
LOCK
TYPE
STOCK #
1/4" SHANK TO FIT 1/4" SQUARE DRIVE
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1"
1-3/8"
2"
2"
3"
3"
4"
4"
6"
6"
BALL
BALL
PIN
BALL
PIN
BALL
PIN
BALL
PIN
BALL
SE050
SE051
SE052
SE053
SE054
SE055
SE056
SE057
SE058
SE059
1/4"
3/8"
1/4"
3/8"
1/4"
3/8"
1-3/8"
1-3/8"
2"
2"
3"
3"
PIN
BALL
PIN
BALL
PIN
BALL
SE060
SE061
SE062
SE063
SE064
SE065
1/4"
1/2"
1/4"
1/2"
• 10 per pack
2"
3"
4"
5"
BALL
BALL
BALL
BALL
SE066
SE067
SE068
SE069
E-7
Bit Holders, Sockets & Extensions
2-1/2"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/2"
NUT SETTERS
1/4" HEX SHANK
7 PC. MAGNETIC NUT SETTER SET
INCH SIZES
CR-VA sandblast finish in folding wallet
STOCK #
SIZE
BULK
CARDED
MAGNETIC INSERT TYPE
Expanded
Offering!
1/4" x 1-1/16"
5/16" x 1-1/16"
3/8" x 1-1/16"
HSN15911
HSN15912
HSN15913
HSN15911C
HSN15912C
HSN15913C
MAGNETIC POWER SHANK TYPE
1/4" x 1-3/4"
5/16" x 1-3/4"
3/8" x 1-3/4"
7/16" x 1-3/4"
1/2" x 1-3/4"
1/4" x 2-9/16"
5/16" x 2-9/16"
3/8" x 2-9/16"
7/16" x 2-9/16"
1/2" x 2-9/16"
1/4" x 4"
5/16" x 4"
3/8" x 4"
E
HSN15930
HSN15931
HSN15932
HSN15933
HSN15933A
HSN15934
HSN15935
HSN15936
HSN15937
HSN15937A
HSN15938
HSN15939
HSN15940
HSN666W2
HSN666W3
HSN15930C
HSN15931C
HSN15932C
HSN15933C
HSN15933AC
HSN15934C
HSN15935C
HSN15936C
HSN15937C
HSN15937AC
—
—
—
DESCRIPTION
OAL
STOCK #
Contains 1 each:
3/16", 1/4", 9/32", 5/16",
11/32", 3/8", 7/16"
1-3/4"
HSN666W2
Contains 1 each:
3/16", 1/4", 9/32", 5/16",
11/32", 3/8", 7/16"
2-9/16"
HSN666W3
• 1 per pack / 12 per carton
7 PC. NON-MAGNETIC NUT SETTER SET
CR-VA sandblast finish in folding wallet
Nut Setters
NON-MAGNETIC POWER SHANK TYPE
3/16" x 1-3/8"
1/4" x 1-1/2"
9/32" x 1-1/2"
5/16" x 1-1/2"
11/32" x 1-1/2"
3/8" x 1-1/2"
7/16" x 1-1/2"
1/4" x 2-9/16"
5/16" x 2-9/16"
3/8" x 2-9/16"
HSN15920
HSN15921
HSN15922
HSN15923
HSN15924
HSN15925
HSN15926
HSN15927
HSN15928
HSN15929
HSN15920C
HSN15921C
HSN15922C
HSN15923C
HSN15924C
HSN15925C
HSN15926C
HSN15927C
HSN15928C
HSN15929C
METRIC SIZES
STOCK #
SIZE
BULK
CARDED
See page A-72 for
Monolock™ Quick
Change Chuck
Information
Contains 1 each:
3/16", 1/4", 9/32", 5/16",
11/32", 3/8", 7/16"
STOCK #
HSN66698W
• 1 per pack / 12 per case
MAGNETIC INSERT TYPE
HANGERBOLT DRIVER
6MM X 1-1/8"
7MM x 1-1/8"
8MM x 1-1/8"
10MM x 1-1/8"
HSN15950
HSN15951
HSN15952
HSN15953
HSN15950C
HSN15951C
HSN15952C
HSN15953C
HANGERBOLT
DRIVER
MAGNETIC POWER SHANK TYPE
6MM x 1-3/4"
7MM x 1-3/4"
8MM x 1-3/4"
10MM x 1-3/4"
6MM x 2-9/16"
7MM x 2-9/16"
8MM x 2-9/16"
10MM x 2-9/16"
HSN15956
HSN15957
HSN15958
HSN15959
HSN15961
HSN15962
HSN15963
HSN15964
• Bulk 10 per pack • Card 1 per card
E-8
HSN15956C
HSN15957C
HSN15958C
HSN15959C
HSN15961C
HSN15962C
HSN15963C
HSN15964C
Hangerbolt stud driver makes
driving hangerbolts quick and easy
The driver has internal threads with a pin stop in
the barrel, so the hangerbolt will not tighten inside
the driver, allowing the driver to be easily reversed.
THREAD SIZE x OAL
STOCK #
1/4" - 20 x 2-9/16"
5/16" - 18 x 2-9/16"
3/8" - 16 x 2-9/16"
HSN16020
HSN16022
HSN16021
• 10 per pack
MERCHANDISERS & DISPENSERS
1000 PC. INSERT-BIT DISPENSER
• Display unit measures—8" H x 12" W x 16" D
• Durable, plastic dispenser case.
• Lexan clear see-through dual doors.
• Contains 26 individual compartments.
• Feature the most popular screwdriver bits & magnetic nut setters.
• Ideal for checkout counters.
Standard Mix Stock # HSB66699
Contents
TYPE
SIZE
QTY.
STOCK #
. TYPE
SIZE
QTY.
STOCK #
®
#
#
#
#
#
#
#
#
1 x 1"
2 x 1"
3 x 1"
2R x 1"
1 x 2"
2 x 2"
3 x 2"
2 x 1"
100
200
25
100
50
50
25
25
HSB15802
HSB15803
HSB15804
HSB15805
HSB15845
HSB15846
HSB15847
DSP271
SLOTTED BITS
Insert
Insert
Power
Power
Power
8-10 x 1"
10-12 x 1"
6-8 x 2"
8-10 x 2"
10-12 x 2"
25
25
25
25
25
HSB15810
HSB15811
HSB15864
HSB15865
HSB15866
• 1 Dispenser per box
TORX BITS
Insert
Insert
Insert
Insert
Insert
T10
T15
T20
T25
T30
x
x
x
x
x
1"
1"
1"
1"
1"
25
25
25
25
25
HSB15824
HSB15825
HSB15826
HSB15827
HSB15829
SQUARE RECESS BITS
Insert
# 1 x 1"
Insert
# 2 x 1"
Power
# 1 x 2"
Power
# 2 x 2"
25
50
25
25
HSB15815
HSB15816
HSB15872
HSB15873
NUTSETTERS
Magnetic
Magnetic
Magnetic
1/4" x 2-9/16"
5/16" x 2-9/16"
3/8" x 2-9/16"
10
10
10
HSN15934
HSN15935
HSN15936
BIT HOLDERS
Magnetic
1/4" x 3"
20
HSB66697
E
Merchandisers & Dispensers
PHILLIPS BITS
Insert
Insert
Insert
Reduced
Power
Power
Power
Indenter
Cabinet only (without bits) Stock # HSB1000
DRIVE TOOL BIT ASSORTMENT KITS
24 COMPARTMENTS
DESCRIPTION
QTY.
STOCK #
480
HSBT100
480
HSBT101
424
HSBT103
TAMPER PROOF BITS ASSORTMENT – 20 pcs. each:
SPANNER: #4, #6, #8, #10, #12, #14
TORX®: TT5, TT6, TT7, TT8, TT9, TT10,
TT15, TT20, TT25, TT27, TT30, TT40
TRI-WING: #1, #2, #3, #4; #5, #6
TAMPER PROOF BITS ASSORTMENT – 20 pcs. each:
SPANNER: #4, #6, #8, #10, #12, #14
HEX: 3/32", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16"
TORX®: TT7, TT8, TT9, TT10, TT15, TT20,
TT25, TT27, TT30, TT40
HEX DRIVE BITS ASSORTMENT – 20 pcs. each:
HEX SOCKET:
Fractional sizes - 0.5, 1/16", 5/64", 3/32", 7/64", 1/8",
9/64", 5/32", 3/16", 7/32", 1/4", 5/16"
Metric sizes - 1.5mm, 2, 2.5, 3, 4, 5, 6, 8
HEX MAGNETIC NUT SETTERS – 6 pcs. each:
1-3/4" OAL – 1/4", 5/16", 3/8", 7/16"
E-9
INSERT BIT JARS, MAGAZINES & SETS
BIT MAGAZINE
SELECT-A-BIT
JAR DISPLAY
• Point-of-purchase counter display
with attractive graphics.
1/4" HEX SHANK
• Clear plastic jar allows
maximum product exposure
in minimum space.
6 Insert Bits, in a PVC holder with key chain ring
CONTENTS
Expanded
Offering!
CONTENTS
ITEM
QTY.
HSB15803
250
CJ8004A
#2 x 1" Phillips
HSB15803
500
CJ8004
#2R x 1" Phillips Reduced
HSB15805
250
CJ8008A
HSB15805
500
CJ8008
#2 x 1" Square Recess
HSB15816
250
CJ8005A
HSB15816
500
CJ8005
HSB15829
250
CJ8020
E
Driving Tools & Kits
HSB35918
HSB35919
BIT BANDOLIER
1/4" HEX SHANK
Screwdriver bit tool holder wraps around power or
cordless screwdriver – holds eight bits and 1 bit holder.
POWER BITS
#2 x 2" Phillips
HSB15846
250
CJ8022
#2 x 2" Phillips
HSB15846
500
CJ8023
HSB15873
250
CJ8024
HSB15873
500
CJ8026
• 12 per pack
#2 x 1" Phillips
T30 Torx® Insert
HSB35917
STOCK #
INSERT BITS
.
STOCK #
#2 x 1" Phillips
CONTENTS
STOCK #
#2 x 1" Phillips
8 pcs., 1 bit holder
HSB35925
HSB35926
HSB35927
®
ACR BITS
• 12 per pack
#2 x 1" Phillips
HSB26111
250
CJ8030
#2 x 1" Phillips
HSB26111
500
CJ8031
HSB26113
250
CJ8033
HSB26113
500
CJ8034
BELT MAGAZINE
50
CJ8040
8 inserts and 1 bit holder
in belt magazine.
BIT HOLDERS MAGNETIC
3" Bit Holder with Retaining Ring
HSB66697
1/4" HEX SHANK
NUT SETTERS MAGNETIC
POWER SHANK
CONTENTS
1/4" x 2-9/16" Nut Setters
HSN15934
50
CJ8042
HSN15935
50
CJ8044
#2 x 1" Phillips
HSN15936
50
CJ8046
• 1 jar display per box
STOCK #
HSB35930
HSB35931
HSB35932
• 12 per pack
30 PC. 1/4" HEX SHANK INDUSTRIAL INSERT BIT SETS
WITH MAGNETIC BIT HOLDER, IN STEEL CASE
EACH WITH 1 STAINLESS METAL MAGNETIC BIT HOLDER
• New design compact
slim case made of steel.
E-10
QTY. PER CASE
BIT SIZE & TYPE
STOCK #
• All assortments feature
the most popular bit styles.
30 pc.
#2 x 1" Phillips
BC9001
• A stainless steel magnetic
bit holder fits in its own cavity.
30 pc.
BC9002
30 pc.
BC9003
15 pc.
15 pc.
#2R x 1" Phillips Reduced and
BC9004
1 pc.
Screwdriver Bit Case (without bits)
BC9000
• 1 per case
DRYWALL SCREW STOPPER
Sets perfectly flush
The “Stopper”
Drywall Screw
Drywall
Stud
• Drives screw perfectly flush into drywall.
• Prevents dimpling / damaging.
• Use in any 1/4" bit holder.
SELECT-A-BIT JAR DISPLAY
SIZE
PACK QTY.
STOCK #
#2 Ph x 1" x 1/4"
25
DSP271
T40 x 1" x 1/4"
25
SIZE
PACK QTY.
STOCK #
#2 Ph x 1" x 1/4"
250
DSPJ271
• 1 jar display per box
DST40
INSERT BIT “CHEW CANS”
20 PC. 1/4" HEX SHANK INSERT BITS
IN METAL “CHEW CANS”
E
BITS
PER CAN
BIT SIZE & TYPE
CHEW CAN
STOCK #
DISPLAY
STOCK #
20
# 2 x 1" Phillips
CC15803
CC15803D
20
# 2R x 1" Phillips Reduced
CC15805
CC15805D
20
# 2 x 1" Square Recess
CC15816
CC15816D
20
# 2 x 1" ACR® Phillips
CC26110
CC26110D
20
# 2R x 1" ACR® Phillips Reduced
CC26113
CC26113D
• Assortments feature the most popular bit styles.
• Bits are always at hand in easy to carry compact can.
• Attractive point of purchase counter display.
• 16 “chew cans” per display carton
THE HANDY-DRIVER KIT
7 TOOLS-IN-ONE SCREWDRIVER KIT
•
•
•
•
•
Easy-grip translucent handle – is available in beautiful yellow & blue colors.
Each handle comes equipped with a chuck.
Hardened blades clamp securely in the chuck.
Screw-on lid stores 7 interchangeable blades.
A multiple use HANDYTOOL KIT is versatile and convenient.
HANDLE
COLOR
Blue
Yellow
DESCRIPTION
7 PC. Handy-tool Kit
Contains blade styles:
STOCK#
BULK
CARDED
HT16011 HT16011C
HT16012 HT16012C
Slotted: #6-8, 8-10, 10-12
Phillips: #2
Screw Starter / Hole Reamer
Leather Punch
Center Punch
• Card 1 per card
E-11
SCREWDRIVER BIT BLOCK SETS
35 PC. BIT BLOCK SET ASSORTMENTS
In honeycomb plastic storage case
• Each set contains 1 stainless
steel magnetic bit holder.
PCS.
PER SET
• Compact holders for easy selection
and storage.
• A stainless steel magnetic bit holder
fits snugly into the center cavity of
the block.
wn
Yo u r O
Create m Imprint
Custo
.
details
call for
3 pc.
Screwdriver Bit Block only
with Stainless Steel Magnetic Bit Holder
35 pc.
#2 Phillips Reduced Drywall Bits – 32 each
BBL9001
BBL9001C
35 pc.
#2 Square Recess Bits – 32 each
BBL9002
BBL9002C
35 pc.
#2 Phillips Reduced Drywall Bits – 16 each
#2 Square Recess Bits – 16 each
BBL9003
BBL9003C
35 pc.
#2 Phillips Bits – 32 each
BBL9004
BBL9004C
BBL9005
BBL9005C
BBL8001T
BBL8001TC
Professional Assorted Set – 2 each of the following:
#0, 1, 2, 3 Phillips; #2 Reduced Phillips;
#6-8, 8-10, 10-12 Slotted,
#1, 2, 3 Square Recess; T10, T15, T20,
T25, T30 Torx®
35 pc.
Tamper Proof Set – 1 each of the following:
6mm, 8mm, 10mm Torx®,
#4, 6, 8, 10 Spanner; #1, 2, 3, 4 Tri-Wing;
2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm Hex,
5/64", 3/32", 7/64", 1/8", 9/64", 5/32" Hex,
TT8H, TT10H, TT15H, TT20H, TT25H,
TT27H, TT30H, TT35H, TT40H Torx®
35 pc.
• Bulk 12 per case
E
STOCK #
BULK
CARDED
DESCRIPTION
• Bit Blocks are made of durable PVC.
• Can hold any 1/4" hex insert.
Expanded
Offering!
BBL9000
BBL9000C
• Card 1 per card
SCREWDRIVER KITS & SETS
• All bits and nutsetters are made of a shock resistant tool steel and heat treated.
• Durable plastic containers are easily stored in tool boxes.
• Lid dials to release individual bits.
7 Pc. Dial-A-Bit Insert Kit
DESCRIPTION
Contains 1 ea:
#1, #2, #3
Phillips
6-8, 8-10, 10-12
Slotted
T10, T15, T20
Torx®
2-5/8" OAL
Magnetic Bit Holder
• 1 per pack
DESCRIPTION
STOCK #
Contains 1 ea:
#1, #2, #3
Phillips
6-8, 8-10, 10-12
Slotted
2-5/8" OAL
Mag. Bit Holder
HSB66711
• 1 per pack
DESCRIPTION
• 1 per card
Contains 1 ea:
#1, #2, #3
Phillips
3/16", 1/4"
Slotted
#1, #2, #3
Sq. Recess
5/32", 3/16", 7/32", 1/4"
Sq. Drive
9/32", 5/16", 3/8", 7/16", 1/2"
Sockets
1"
Socket Adapter
2-5/8" OAL
Magnetic Bit Holder
STOCK #
HSB66741
• 1 per pack
29 Pc. Security Bit Set (Tamper Proof)
29 Pc. Screwdriver Bit Set
DESCRIPTION
COMPLETE KIT
Magnetic Storage Handle - 8"
1/4" Hex Drive - 1-7/8" Long
1/4" Sq. to 1/4" Hex - 1" Long
TIP SIZES
#0, #1, #2, #3
4-5, 6-8, 8-10, 10-12, 12-14
T10, T15, T20, T25, T30, T40
#0, #1, #2, #3
5/32", 3/16"
5/64", 3/32", 7/64, 1/8", 9/64"
A complete security tool kit in compact tool box.
STOCK #
A complete
screwdriver tool
kit in compact
tool box.
HT10103
DESCRIPTION
Hand Drive
Bit Holder
Adapter
TIP STYLE
Spanner
Pozidriv®
Tri-Wing
Hex Socket
Torx®
• 1 per pack
E-12
HSB66721C
DESCRIPTION
STOCK #
• 1 per pack
Sq. Recess
Clutch
Hex Socket
HSB66721
19 Pc. Dial-A-Bit & Socket Kit
Contains 1 ea:
#1, #2, #3
Phillips
3/4", 1/4"
Slotted
HSB66734
T10, T15, T20, T25, T30
Torx®
#1, #2, #3
Sq. Recess
5/64", 3/32", 1/8", 5/32", 3/16"
Hex
2-5/8" OAL
Magnetic Bit Holder
Torx®
CARDED
See Page E-31 for Dispenser Display
Hand Drive
Bit Holder
Adapter
TIP STYLE
Phillips
Slotted
STOCK #
• 1 per pack
COMPLETE KIT
Magnetic Storage Handle - 8"
1/4" Hex Drive - 1-7/8" Long
1/4" Sq. to 1/4" Hex - 1" Long
TIP SIZES
#6, #8, #10
#0, #1
#1, #2, #3
3/32", 1/8", 9/64", 5/32", 3/16",
7/32", 1/4", 5/16"
TT8, TT9, TT10, TT15,
TT20, TT25, TT30, TT40
STOCK #
HSB16010
HANDYPAC® ASSORTMENTS
BITS / DRIVER COMBO
WORK ON ANY TYPE OF SCREW WITH THE HANDYPAC®
Features • Multipurpose, convenient combination kits for everyday use.
• The HANDYPAC® has the size of a standard screwdriver, but
the variability of an 18 pc & 17 pc Screwdriver Bit Assortments.
Create Your Own
Custom Imprint
• The long magnetic Bit Holder and the professional Screwdriver Bits
can also be used with power drills and screwdrivers.
Call for details.
• The HANDYPAC® is suitable for industrial and general use,
and is available in 3 varieties:
19 pc. HANDYPAC I® with General Purpose Bits
19 pc. HANDYPAC II® with Tamper Proof Bits
17 pc. HANDYPAC III® with General Purpose Bits
19 PC. HANDYPAC® I
STOCK #
BULK
CARDED
DESCRIPTION
19 Pc. Handypac® I
Contains:
1 ea Heavy Duty Magnetic Bit Holder
Phillips Inserts: #1, #2, #3
HSB66731
3 ea
Slotted Inserts: 4-5, 6-8, 8-10
6 ea
Torx Inserts: T10, T15, T20, T25, T30, T40
3 ea
Square Recess Inserts: #1, #2, #3
3 ea
Hex Inserts: 3/32", 7/64", 1/8"
HSB66731C
®
• Bulk 6 per carton
• Card 1 per card
19 PC. HANDYPAC® II
WITH TAMPER PROOF BITS
STOCK #
BULK
CARDED
DESCRIPTION
19 Pc. Handypac® II
Contains:
3 ea
Spanner Inserts: #6, #8, #10
3 ea
Tri-Wing Inserts: #1, #2, #3
6 ea
Torx Inserts: TT10, TT15, TT20, TT25, TT30, TT40
6 ea
Hex Inserts: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32"
HSB66732 HSB66732C
®
• Bulk 6 per carton
• Card 1 per card
17 PC. HANDYPAC® III
WITH BELT CLIP
STOCK #
BULK
CARDED
DESCRIPTION
17 Pc. Handypac® III
Contains:
4 ea
Phillips Inserts: #0, #1, #2, #3
2 ea
Slotted Inserts: 1/4", 3/16"
2 ea
Pozidrive Inserts: #1, #2
3 ea
Square Recess Inserts: #1, #2, #3
3 ea
Torx Inserts: T10, T15, T20
2 ea
Hex Inserts: 1/8", 5/32"
HSB66733 HSB66733C
®
• Bulk 12 per display carton
• Card 1 per card
E-13
E
Handypac® Assortments
3 ea
FLEXIBLE SHAFT SOCKET DRIVERS
FSD1038
FSD1014
FSD1015 FSD1016
FSD1010
FSD1039
DESCRIPTION
STOCK #
1/4" Sq. Drive Translucent Handle
FSD1014
1/4" Flexible Shafts for use with
1/4" Drive Handle
4" OAL Extension
6" OAL Extension
10" OAL Extension
FSD1015
FSD1016
FSD1010
3/8" Sq. Drive Translucent Handle
FSD1038
5/16" Flexible Shafts for use with
3/8" Drive Handle
8" OAL Extension
11" OAL Extension
FSD1039
FSD1040
Note: All flexible socket drives are not made to drive home
or to break loose, but only to adjust.
FSD1040
MAGNETIC RETRIEVER
Misc. Accessories
E
DESCRIPTION
Magnetic Retriever
STOCK #
BULK
CARDED
MRO32
MRO32C
• Heavy Duty Magnet picks up metal objects
from hard to reach places.
• 6" Collapsed length can be extended to 32".
• Chrome plated high gloss finish.
• Card 1 per card
• Comes with convenient pocket clip.
“SCREW-OUT®” INSERT
HIGH SPEED STEEL • LEFT HAND CUT • 1/4" HEX SHANK
For Extracting Broken/Unscrewable Screws
Damaged
screw head
When a screwdriver cannot remove a damaged
head screw, the SCREW-OUT® ploughs into the
screw and unscrews the damaged screw.
SCREW-OUT
SIZE
REMOVES
SCREW SIZES
STOCK #
P1
P2
P3
No. 6 - No. 8
No. 8 - No. 10
No. 10 - No. 14
SOP1C
SOP2C
SOP3C
3 Pc. Set
1 each P1, P2, P3
in plastic case
SOPSC
• Individually carded
E-14
Removes all these screws
TORX® DRIVERS FOR CARBIDE INSERTS
Especially for use with indexable carbide tooling and also for working in confined spaces.
• Blade is made of high alloy chrome vanadium molybdenum steel, hardened & black finished.
• Wing/Flag handle, high quality plastic, impact resistant, cadmium-free.
FLAG STYLE
WING STYLE
®
TORX
SIZE
SHAFT
LENGTH
OVERALL
LENGTH
STOCK #
TORX
SIZE
SHAFT
LENGTH
OVERALL
LENGTH
STOCK #
T6
T7
T8
2.0"
2.0"
2.0"
3.3"
3.3"
3.3"
W36510
W36512
W36515
T6
T7
T8
1.38"
1.38"
1.58"
2.64"
2.64"
2.84"
W37016
W37019
W37022
T9
T10
T15
T20
2.0"
2.0"
2.0"
2.0"
3.3"
3.3"
3.3"
3.3"
W36520
W36525
W36530
W36535
T9
T10
T15
T20
1.58"
1.58"
1.77"
1.77"
2.89"
2.89"
3.15"
3.15"
W37026
W37029
W37032
W37036
®
• 10 per pack
• 10 per pack
E
Drivers & Screws for Carbide Inserts
7 PC. WING DRIVER SET with STAND
7 PC. FLAG DRIVER SET with STAND
TYPE
SIZES
STOCK #
TYPE
SIZES
STOCK #
7 PC.
Contains 1 ea.
T6, T7, T8, T9, T10, T15, T20
W36590
7 PC.
Contains 1 ea.
T6, T7, T8, T9, T10, T15, T20
W37090
• 1 per pack
• 1 per pack
SCREWS FOR CARBIDE INSERTS
HEAT TREATED & HARDENED FOR REPETITIVE USE
TORX® DRIVE
Metric sizes (mm)
THREAD
M
D
L
L1
I
H
HEAD
ANGLE
Torx® KEY
SIZE T
STOCK #
M2.5 - 0.45
3.45
4.5
2.5
0.8
0.9 - 1.0
60O
T7
SC2504
O
M2.5 - 0.45
4.5
6
—
0.4
1.3
62
T8
SC2505
M2.5 - 0.45
3.45
6.5
3.5
0.8
0.9 - 1.0
60O
T7
SC2506
M3 - 0.5
4.2
7.4
6.5
1.0
1.0 - 1.2
60O
T9
SC3007
M4 - 0.7
5.6
7.9
3.8
1.6
2
60O
T15
SC4007
M4 - 0.7
5.5
8.4
4.5
1.5
1.5 - 1.7
60O
T15
SC4008
O
H
T
M4 - 0.7
8.1
9
—
0.5
1.6
82
T20
SC4009
M4 - 0.7
5.5
11.4
7.0
1.5
1.5 - 1.7
60O
T15
SC4011
M5 - 0.8
6.4
11.0
6.0
—
1.5 - 1.8
43O
T20
SC5011
M5 - 0.8
7.2
12.0
8.0
1.5
1.8 - 2.0
60O
T15
SC5012
HEAD
ANGLE
D
M
L1
I
L
• 25 per pack
E-15
L KEYS • L KEY SETS
HEX-L KEYS SHORT ARM
HEX-L KEYS, LONG ARM
®
TORX L KEYS
BOTH END
T6
T7
T8
T9
T10
T15
T20
T25
T27
T30
T40
T45
T50
T6 Short Arm
T7 Short Arm
T8 Short Arm
T9 Short Arm
T10 Short Arm
T15 Short Arm
T20 Short Arm
T25 Short Arm
T27 Short Arm
T30 Short Arm
T40 Short Arm
T45 Short Arm
T50 Short Arm
HK15251
HK15252
HK15253
HK15254
HK15255
HK15256
HK15257
HK15258
HK15259
HK15260
HK15261
HK15262
HK15263
Features
• Extra torque 8950
chrome nickel alloy.
• Finished to resist
rust.
• Heat treated for
maximum strength.
• Best quality.
• 25 per pack
HEX-L KEYS TAMPER RESISTANT
TORX® L KEYS
SHORT ARM
TT8
TT9
TT10
TT15
TT20
TT25
TT30
E
TT8 Tamper Resistant
HSB15990
HSB15991
HSB15992
HSB15993
HSB15994
HSB15995
HSB15996
L Keys & Sets
HSB16001
HSB16002
HSB16003
HSB16004
HSB16005
HSB16006
HSB16007
HSB16008
• 25 per pack
HEX-L KEY SETS
TYPE
SIZES
STOCK #
LONG ARM INCH SET
13 Pc.
.050, 1/16", 5/64", 3/32",
HEX
7/64", 1/8", 9/64", 5/32",
3/16", 7/32", 1/4", 5/16", 3/8"
9 Pc.
HEX
LONG ARM METRIC SET
MM 1.5, 2, 2.5,
3, 4, 5, 6, 8, 10
STOCK #
1/16"
5/64"
3/32"
7/64"
3-1/16"
3-1/4"
3-1/16"
3-5/8"
HK15204
HK15205
HK15206
HK15207
1/8"
9/64"
5/32"
3/16"
3-13/16"
4"
4-3/16"
4-15/32"
HK15208
HK15209
HK15210
HK15212
7/32"
1/4"
5/16"
3/8"
4-7/8"
5-5/16"
6"
6-13/16"
HK15214
HK15216
HK15220
HK15224
7/16"
1/2"
9/16"
5/8"
3/4"
7-1/2"
8-1/4"
9"
9-3/4"
11-1/4"
HK15228
HK15232
HK15236
HK15240
HK15248
BALL HEX-L KEYS, LONG ARM
SHORT ARM
3/32" Tamper Resistant
LENGTH
• 25 per pack
HEX-L KEYS
3/32"
1/8"
9/64"
5/32"
3/16"
7/32"
1/4"
5/16"
SIZE
SIZE
LENGTH
STOCK #
.050
1/16"
5/64"
3/32"
2-29/32"
3-1/16"
3-1/4"
3-7/16"
HK18203
HK18204
HK18205
HK18206
7/64"
1/8"
9/64"
5/32"
3-5/8"
3-13/16"
4"
4-3/16"
HK18207
HK18208
HK18209
HK18210
3/16"
7/32"
1/4"
5/16"
3/8"
4-15/32"
4-7/8"
5-5/16"
6"
6-13/16"
HK18212
HK18214
HK18216
HK18220
HK18224
• 25 per pack
HK10213
HK10609
• 1 per pack
BALL HEX-L KEY SETS
Turns 360O at up to 25O angle
7
3 ––
STOCK #
5 ––
16 32
9 ––
32
––
8
7
6 5.5
5
4.5
15 KEYS
METRIC SIZES
LONG ARM SERIES
SHORT ARM SERIES
INDUSTRIAL QUALITY
CHROME VANADIUM STEEL
4
3
0.7
0.028
10
In plastic index case
HK13609
TYPE
SIZES
STOCK #
30 Pc.
LONG ARM, INCH SIZES
.028, .035, .050, 1/16", 5/64",
3/32", 7/64", 1/8", 9/64", 5/32",
3/16", 7/32", 1/4", 5/16", 3/8"
HK10530
HEX-L KEY SETS
In metal index case
E-16
3
–
8
30 PIECE INCH & METRIC HEX-L KEY SET
• 1 per pack
TYPE
SIZES
STOCK #
18 Pc. INCH
SHORT SERIES
0.028" to 5/8"
HK10118
15 Pc. METRIC
SHORT SERIES
0.7 MM to 17.0 MM
HK10515
• 1 per pack
5
––
16
0.9
1.3
1.5
LONG ARM METRIC SET
MM 1.5, 2, 2.5,
3, 4, 5, 6, 8, 10
16
1
–
4
15 KEYS
INCH SIZES
2
9 Pc.
HEX
1 64
7 –
3 –– 8
5 –– 64
1 –– 32
–– 64
2.5
LONG ARM INCH SET
13 Pc.
.050, 1/16", 5/64", 3/32",
HK13213
HEX
7/64", 1/8", 9/64", 5/32",
3/16", 7/32", 1/4", 5/16", 3/8"
0.050
SIZES
0.035
TYPE
SHORT ARM, METRIC SIZES
0.7MM, 0.9, 1.3, 1.5, 2.0, 2.5, 3.0,
4.0, 4.5, 5.0, 5.5, 6.0, 7.0, 8.0, 10.0
• 1 per pack
HEX KEYS • HEX KEY SETS
HEX-T KEY SETS
6" & 9" ARM HEX-T KEYS
With stand
Standard grip
SIZE
6" ARM
STOCK #
9" ARM
STOCK #
3/32"
7/64"
1/8"
HK31606
HK31607
HK31608
HK31906
HK31907
HK31908
9/64"
5/32"
3/16"
HK31609
HK31610
HK31612
HK31909
HK31910
HK31912
7/32"
1/4"
5/16"
3/8"
HK31614
HK31616
HK31620
HK31624
HK31914
HK31916
HK31920
HK31924
TYPE
SIZES
STOCK #
10 Pc.
HEX
6" ARM INCH SET, CUSHION GRIP
3/32", 7/64", 1/8", 9/64", 5/32", 3/16",
7/32", 1/4", 5/16", 3/8"
HK50160
10 Pc.
HEX
6" ARM INCH SET, STANDARD GRIP
3/32", 7/64", 1/8", 9/64", 5/32", 3/16",
7/32", 1/4", 5/16", 3/8"
HK30160
8 Pc.
HEX
6" ARM METRIC SET, CUSHION GRIP
MM 2, 2.5, 3, 4, 5, 6, 8, 10
HK56168
8 Pc.
HEX
6" ARM METRIC SET, STANDARD GRIP
MM 2, 2.5, 3, 4, 5, 6, 8, 10
HK36168
• 1 per pack
• 25 per pack
FOLD UP KEY SETS
TYPE
SIZES
STOCK #
5 Pc.
HEX
LARGE, INCH SET
3/16", 7/32", 1/4", 5/16", 3/8"
HK20511
8 Pc.
HEX
SMALL, INCH SET
.050, 1/16", 5/64", 3/32", 7/64",
1/8", 9/64", 5/32"
HK20811
9 Pc.
HEX
MEDIUM, INCH SET
5/64", 3/32", 7/64", 1/8", 9/64",
5/32", 3/16", 7/32", 1/4"
HK20911
6 Pc.
LARGE, INCH SET
HKE25611
HEX 5/32", 3/16", 7/32", 1/4", 5/16", 3/8"
7 Pc.
HEX
SMALL, METRIC SET
MM 1.5, 2, 2.5, 3, 4, 5, 6
HK21171
9 Pc.
HEX
HKE25911
7 Pc.
HEX
MEDIUM, TORX® SET
T10, T15, T20, T25, T27, T30, T40
MEDIUM, INCH SET
5/64", 3/32", 7/64", 1/8", 9/64",
5/32", 3/16", 7/32", 1/4"
HK22571
FOR MAINTENANCE CREWS
# 1 PHILLIPS, T15 TORX®,
3 SIZES SLOTTED, 1 AWL
SMALL, METRIC SET
MM 1.5, 2, 2.5, 3, 4, 5, 6
HKE25171
6 Pc.
UTILITY
INCH
7 Pc.
HEX
HK22461
ERGONOMIC FOLD UP KEY SETS
TYPE
SIZES
STOCK #
®
• 1 per pack
• 1 per pack
BALL HEX DRIVERS
INCH SIZES
METRIC SIZES
HEX SIZE
BLADE
LENGTH
STOCK #
HEX SIZE
BLADE
LENGTH
STOCK #
.050
1/16"
5/64"
3/32"
7/64"
1/8"
9/64"
5/32"
3/16"
7/32"
1/4"
5/16"
3/8"
7/16"
1/2"
2.5
2.5
2.5
2.5
2.5
5.0
5.0
5.3
5.3
5.3
5.5
5.5
5.5
7.2
8.0
BD91103
BD91104
BD91105
BD91106
BD91107
BD91108
BD91109
BD91110
BD91112
BD91114
BD91116
BD91120
BD91124
BD91128
BD91132
1.3
1.5
2.0
2.5
2.5
2.5
BD91602
BD91603
BD91604
2.5
3.0
4.0
2.5
5.0
5.3
BD91605
BD91606
BD91608
5.0
6.0
8.0
5.3
5.5
5.5
BD91610
BD91612
BD91616
10.0
12.0
5.5
8.1
BD91620
BD91624
• 1 per pack
Driver turns 360O at
up to 35O angle tilt
• 1 per pack
BALL HEX DRIVER SET IN PLASTIC POUCH
TYPE
SIZES
STOCK #
9 Pc.
Contains 1 pc. ea.
1.5, 2.0, 2.5, 3.0, 4.0,
5.0, 6.0, 8.0, 10.0
BD90609
BALL HEX DRIVER SET IN PLASTIC POUCH
TYPE
13 Pc.
SIZES
STOCK #
Contains 1 pc. ea.
.050, 1/16", 5/64", 3/32", 7/64", 1/8",
BD90113
9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8"
• 1 per pack
• 1 per pack
E-17
Hex Keys & Hex Ball Drivers
8 Pc.
MEDIUM, TORX SET
HKE25581
HEX T8, T10, T15, T20, T25, T27, T30, T40
E
QUICK CHANGE SCREWDRIVERS
Features
• All bits are reversible to create different screwdrivers in one handle.
Bits reverse in tube. Tube reverses in handle. Two double bits in each end of tube
create four different screwdrivers in one handle. In the 6-IN-1 assembly,
bits reverse in a hex tube, one end is a 5/16" hex nut setter,
the other end is a 1/4" hex nut setter.
• Industrial quality tool steel bits are heat treated, tempered and stress relieved.
• Heavy duty, extended six flute handle provides a stronger grip with less effort.
• Handles come in six vibrant colors – RED, BLACK, BLUE, GREEN, ORANGE &
PINK. Select one color or order a mix – 12 pcs. per color minimum.
Create Your Own
Custom Imprint
• A great promotional item for any occasion. Put your company name,
phone number in bright gold letters.
Create Your Own
Custom Imprint
Custom imprinting is available for the 4-IN-1
and the 6-IN-1 screw drivers.
YOUR NAME HERE
Custom imprinting guidelines
Maximum of 18 characters per line – including spaces and
punctuation, with a 2-line limit.
48 piece minimum – must be same imprint for each piece.
Custom imprinting charges
One Time Die Charge on orders of less than 72 pieces.
Nominal imprinting charge per line.
E
Screwdrivers
Packaging
All screwdrivers are packed in counter / hangup display
(12 units per display).
THE CLASSIC
4-
STOCK #
DESCRIPTION
#1 Phillips x 3/16" Slotted
Red
Black
Blue
Green
Orange
Pink
T15 Torx x T20 Torx
T25 Torx x T30 Torx
Red
Black
®
®
®
®
BULK
CARDED
SCD41R
SCD42BK
SCD43B
SCD44G
SCD45O
SCD46P
SCD41RC
SCD42BKC
SCD43BC
SCD44GC
SCD45OC
SCD46PC
SCD47R
SCD48BK
#1 Phillips x #2 Phillips
#1 Square Recess x #2 Square Recess
Red
SCD49R
Black
SCD50BK
• 12 per countertop display
E-18
—
—
—
—
- ONE
IN
SCREWDRIVER
1
2
3
4
Reversible Bit
Reversible Bit
5/16" HEX REPLACEMENT BITS
STOCK #
DESCRIPTION
T15 Torx x T20 Torx
T25 Torx x T30 Torx
3/16" Slotted x 9/32" Slotted
• 25 per pack
®
®
®
®
BULK
CARDED
SRB41
SRB42
SRB43
SRB44
SRB45
SRB46
SRB47
SRB41C
SRB42C
SRB43C
SRB44C
SRB45C
SRB46C
SRB47C
QUICK CHANGE SCREWDRIVERS
THE PROFESSIONAL
6 - IN- ONE
DESCRIPTION
STOCK #
Red
SCD61
Red
SCD62
T15 Torx x T20 Torx
T25 Torx x T30 Torx
Red
SCD63
®
®
®
®
Create Your Own
Custom Imprint
SCREWDRIVER
1
2
4
3
Reversible Bit
Reversible Bit
6
5
1/4" Hex Nut Driver
Reversible Shaft
5/16" Hex Nut Driver
Reversible Shaft
STOCK #
• 12 per countertop display
DESCRIPTION
T25 Torx x T30 Torx
®
- ONE
IN
SCREWDRIVER
SRB61C
SRB62C
E
• Carded 1 per card
2-
FOR THE POCKET
IDEAL FOR
CLOSE-UP WORK
CARDED
SRB61
SRB62
- ONE
IN
SCREWDRIVER
Expanded
Offering!
2
1
#1 Phillips Bit
2
1
#1 Phillips Bit
3/16" Slotted Bit
STOCK #
BULK
CARDED
DESCRIPTION
Red
SCD21
SCD21C
Red
SCD22
SCD22C
Red
SCD23
SCD23C
Red
SCD24
SCD24C
Red
SCD25
SCD25C
#2 Phillips Bit
DESCRIPTION
STOCK #
Red
SCD26
Red
SCD27
#2 Phillips x #2 Square Recess
Red
SCD28
3/16 Slotted x 9/32" Slotted
Red
SCD29
• 12 per pack
4-IN-1 MINI LENGTH
• 12 per pack
DESCRIPTION
STOCK #
Red
SCD4M
• 12 per pack
EXCELSIOR 4-IN-1
COUNTER DISPLAY
DESCRIPTION
ECOPRO 4-in-1 QUICK CHANGE SCREWDRIVER
Stock # SCD51R
STOCK #
Contains 12 each SCD51R
SCD51RD
4-IN-1 screwdrivers
• 12 per countertop display (No custom imprinting)
E-19
Screwdrivers
2-
THE INDUSTRIAL STUBBY
®
BULK
QUICK CHANGE ERGONOMIC SCREWDRIVERS
Features
• ERGONOMIC
Large ergonomic grip—offers
beautiful appearance and
strong grip for maximum torque.
5-
- ONE
IN
• BITS
Industrial quality bits reverse in
tube to create four different
screwdrivers in one handle.
• Tube reverses in handle. Tube
ends are 5/16" hex nut driver.
1
2
E
3/16" Slotted
2
#1 Phillips
3
#2 Phillips
4
4
3
3/16" Slotted x #1 Phillips
1
Two Element
Hard / Soft Grip
Crystal Gold
Grip
5
5/16" Hex
STOCK #
DESCRIPTION
5 in 1 Crystal Gold Screwdriver
5 in 1 Two Element Hard / Soft Screwdriver
BULK
CARDED
CGH51
CGH51C
EH52
EH52C
5-IN-ONE SCREWDRIVER COUNTER DISPLAYS
Contains 12 each:
9/32" Slotted
CGH51 5-IN-ONE screwdrivers
Stock # CGH51D
EH52 5-IN-ONE screwdrivers
Stock # EH52D
• 12 per countertop / display carton
5/16" Hex
• Card 1 per card
Screwdrivers
5
5
5/16" Hex
#1 Phillips x 3/16" slotted
SRB41
SRB41C
#2 Phillips x 9/32" slotted
SRB42
SRB42C
STOCK # CGH51D
• Bits 25 per pack
MARINE
15 -
- ONE
IN
SCREWDRIVER
PATENT #5265504
Stainless Steel Shaft • Electroless Nickel Plated Bits
For maritime and corrosive atmosphere use
Pull-out
Rotating Cap
High Impact Housing
Rotating Collar
Electroless
Nickel-plated Bits
1/4" Hex Drive
DESCRIPTION
Features
• Palm saving rotating cap.
• Patented Quick Change
Bit System.
• Industrial quality doubleended bits fit most power tools.
15-IN-1 QUICK CHANGE MARINE SCREWDRIVER
INCLUDES 7 DOUBLE END BITS 1/4" HEX X 2" OAL:
#0 Sq. Recess x 3 Sq. Recess
#1 Sq. Recess x 2 Sq. Recess
T10 Torx x T15 Torx
#4 Slotted x #6 Slotted
T20 Torx x T25 Torx
• 1 per pack
• High impact Triax housing.
• Rotating balance point collar.
• 1/4" Hex drive.
E-20
STOCK #
• 5 per pack
®
®
®
®
MP1500
DOUBLE END REPLACEMENT BITS
NICKEL PLATED – 1/4" HEX x 2" OAL
MP1501
MP1502
#0 Sq. Recess - #3 Sq. Recess
#1 Sq. Recess - #2 Sq. Recess
MP1503
MP1504
T10 Torx - T15 Torx
T20 Torx - T25 Torx
T27 Torx - T30 Torx
MP1505
MP1506
MP1507
#4 Slotted - #6 Slotted
MP1508
1/8" Hex x 5/32" Hex
MP1509
®
®
®
®
®
®
QUICK CHANGE ELECTRONIC SCREWDRIVER
1/4" HEX DRIVE
With Insert Bit Storage Handle
12-in-1 FOR ELECTRONIC USE
10-in- 1 FOR SECURITY
Extra Large 4" Handle Stores
6 Double End 1/4" Hex Drive Bits
Extra Large 4" Handle Stores
5 Double End 1/4" Hex Drive Bits
DESCRIPTION
DESCRIPTION
STOCK #
12 in 1 Quick Change Screwdriver
SRB121
Double End 1/4" Hex Drive
Replacement Bits
T3 Torx® x T4 Torx®
#0 JPH x #1 JPH (Japanese Cross Point)
SRB71
SRB72
SRB73
SRB74
SRB75
SRB76
STOCK #
10 in 1 Quick Change Screwdriver
SCB101
Double End 1/4" Hex Drive
Replacement Bits
TT15 Tamper Torx® x TT20 Tamper Torx®
SCB77
SCB78
SCB79
SCB80
5/32" Tamper Hex x #4 Line Head
SCB81
• 10-in-1 Screwdrivers - 12 per Std. Pack
• Double End Bits - 10 per Pack
• 12-in-1 Screwdrivers - 12 per Std. Pack
• Double End Bits - 10 per Pack
E
Screwdrivers
RATCHET SCREWDRIVER
SILENT SMOOTH OPERATION
Patent # 6,202,512
Features
6-
- ONE
RATCHET
• Unbreakable ratchet
mechanism.
• Reversible shaft nut driver
1/4" and 5/16".
IN
SCREWDRIVER
• High torque capability.
• Heavy duty grip.
Ratchet Selector Collar
1
3/16" Slotted
1
2
9/32" Slotted
3
#1 Phillips
4
#2 Phillips
5
5/16" Hex
Nut Driver
6
1/4" Hex
Nut Driver
2
4
3
6
5
DESCRIPTION
1/4" Hex Nut Driver
STOCK #
RATCHET 6-IN-1 SCREWDRIVER
1/4" Hex Nut Driver
SCD6RA
RATCHET 6-IN-1 COUNTER DISPLAY
contains 8 each SCD6RA
6-IN-ONE Ratchet screwdrivers
SCD6RA8
• Pack 8 per pack
See pages E-18 & E-19 for replacement bits
8 PCS / DISPLAY CARTON
E-21
THE TELESCOPIC VARI-DRIVER
QUICK CHUCK DRIVER
Features
• An innovative design, the ultimate
in screw driving technology.
12"
• The shortest length of 5" is extendable to
a maximum length of 12".
• Use any length in between in steps of 3/8".
5"
• Ergonomic translucent crystal gold grip handle.
• Chrome plated steel shaft hardened & tempered.
E
DESCRIPTION
STOCK #
The Vari-Driver
VD12
Screwdrivers
• 12 per pack
THE 19 PC. VARI-DRIVER KIT
IN FITTED PLASTIC CASE
DESCRIPTION
A versatile multi-use kit for both
close and far reach jobs.
STOCK #
The 19 pc. Vari-Driver kit
VD13
The kit contains the following:
Vari-Driver with extension
VD12
Screw Insert Bits:
Slotted # 4 - 5
Slotted # 6 - 8
Slotted # 8 - 10
Slotted # 10 - 12
Phillips # 1
Phillips # 2
Phillips # 3
Square Recess # 1
Square Recess # 2
Square Recess # 3
HSB15808
HSB15809
HSB15810
HSB15811
HSB15801
HSB15802
HSB15803
HSB15815
HSB15816
HSB15817
SOCKETS – 1" OAL
STOCK # VD13
1/4" Square Drive x 3/16" Hex
Extension 1/4" x 1/4" x 1-3/8"
E-22
SDS018
SDS020
SDS022
SDS024
SDS026
SDS028
SE051
QUICK LOCK BIT HOLDER / DRIVER
WITH A POSITIVE SHAKE-PROOF LOCK
STOCK # HSB16014
By actuating the Sleeve 1 , the ball 2 releases the insert 3 .
Balls snugly nestle into insert grooves 4 providing shakeproof lock.
The Quick-Lock system developed in Germany, enables fast easy
handling of screwdriver inserts with a positive shake-proof lock. The
quick lock system is available either as a bit holder, or an ergonomic
grip driver for direct manual use. Uses any 1/4" Hex Insert Bit.
1
2
4
TYPE
3
Bit Holder
Screwdriver
STOCK #
LENGTH
BULK
CARDED
2-5/16"
HSB16012
HSB16012C
9"
HSB16014
HSB16014C
• Card 1 per card
E
STOCK # HSB16012
Screwdrivers
MAGNETIC SCREWDRIVER
1/4" & 5/16" HEX DRIVE
With Insert Bit Storage Handle • Capacity to store up to 9 insert bits
Expanded
Offering!
With 5 insert bits in storage handle
HEX
SIZE
OAL
BIT SIZES
SHAFT
STOCK #
1/4"
8"
Slotted #6, #8, #10
Phillips #1, #2
Aluminum
Stainless
SCDM100A
SCDM100
1/4"
8"
Slotted #4, #6,
#8, #10, #12
Aluminum
Stainless
SCDM106A
SCDM106
1/4"
8"
Torx ® T10, T15, T20,
T25, T27
Aluminum
Stainless
SCDM105A
SCDM105
1/4"
8"
Slotted #6, #8
Square #1, #2, #3
Aluminum
Stainless
SCDM107A
SCDM107
1/4"
8"
Torx® Tamper Proof
TT15, TT20, TT25, TT27, TT30
Aluminum
Stainless
SCDM108A
SCDM108
• 12 per pack
Bits not included
HEX
SIZE
OAL
SHAFT
TYPE
STOCK #
1/4"
1/4"
8"
Aluminum
SCDM101
8"
Stainless steel
5/16"
SCDM102
8"
Stainless steel
SCDM104
• 12 per pack
E-23
ELECTRICIAN’S SCREWDRIVER
ERGONOMIC HANDLE • PRECISION TIP • HARDENED, TEMPERED, PLATED
STOCK #
BULK
CARDED
TIP SIZE x OAL
STOCK #
BULK
CARDED
TIP SIZE x OAL
SLOTTED
3/16" x 8"
3/16" x 10"
17/64" x 8"
17/64" x 10"
21/64" x 10"
17/64" x 3-1/2"
PHILLIPS
SCDE111
SCDE113
SCDE115
SCDE117
SCDE119
SCDE121
SCDE111C
SCDE113C
SCDE115C
SCDE117C
SCDE119C
SCDE121C
STOCK #
BULK
CARDED
TIP SIZE x OAL
#1
#1
#2
#2
#3
#2
x
x
x
x
x
x
8"
10"
8"
10"
10"
3-1/2"
SCDE131
SCDE133
SCDE135
SCDE137
SCDE139
SCDE141
STOCK #
BULK
CARDED
TIP SIZE x OAL
SQUARE RECESS
#0
#1
#2
#3
x
x
x
x
8"
8"
9"
9"
SCDE167
SCDE169
SCDE171
SCDE173
TORX
®
SCDE167C
SCDE169C
SCDE171C
SCDE173C
T8 x 8"
T9 x 8"
T10 x 8"
T15 x 8"
T20 x 9"
T25 x 9"
T27 x 8"
T30 x 8"
T40 x 10"
T45 x 10"
18 PC. DISPLAY
E
DESCRIPTION
STOCK #
Contains 3 cards per size
Screwdrivers
SCDE131C
SCDE133C
SCDE135C
SCDE137C
SCDE139C
SCDE141C
PHILLIPS #2 x 3-1/2"
#2 x 8"
SCDE18
#3 x 10"
SLOTTED 17/64" x 3-1/2"
3/16" x 8"
17/64" x 10"
SCDE143
SCDE145
SCDE147
SCDE149
SCDE151
SCDE153
SCDE155
SCDE157
SCDE159
SCDE161
SCDE143C
SCDE145C
SCDE147C
SCDE149C
SCDE151C
SCDE153C
SCDE155C
SCDE157C
SCDE159C
SCDE161C
• Card 1 per blister card
• 1 display per box
STOCK # SCDE18
SUPER SLIM ELECTRONIC SCREWDRIVER
CHROME VANADIUM HEAT TREATED BLADES • CHROME FINISH • BLACK TIPS
BLADE
WIDTH
MM
BLADE
LENGTH
MM
STOCK #
IN.
SLOTTED
2.0
2.5
3.0
3.5
4.0
75
75
100
100
100
3"
3"
4"
4"
4"
SS488001
SS488002
SS488003
SS488004
SS488005
PHILLIPS
#1
#0
#00
#000
• 12 per pack
E-24
100
100
75
75
4"
4"
3"
3"
SS488006
SS488007
SS488008
SS488009
The new SUPER SLIM Screwdrivers incorporate
the features required by the micro electronic
industry. Ergonomically comfortable handles,
have revolving centering heads, which allow
precision finger tip torque control.
BLADE
WIDTH
MM
BLADE
LENGTH
MM
STOCK #
IN.
TORX
®
T5
T6
T7
T8
T9
T10
• 12 per pack
50
50
50
60
60
80
2-1/4"
2-1/4"
2-1/4"
2-1/2"
2-1/2"
3"
SS487705
SS487706
SS487707
SS487708
SS487709
SS487710
HARDWOOD GRIP SCREWDRIVER
WITH HEX BOLSTER • LEATHER HEAD CAP • CR-VA BLADE
These hardwood handle screwdrivers are preferred by wood workers. Leather comfort pads and
large ergonomic handle with hex bolstered shafts enable maximum torque and less fatigue.
PHILLIPS HEAVY DUTY
PROFESSIONAL
QUALITY
with Hex Bolster
Made in Germany
SLOTTED HEAVY DUTY
1
2
3
4
with Hex Bolster
TIP
SIZE
BLADE
LENGTH
BLADE
LENGTH
TIP
SIZE
OAL
STOCK #
IN.
MM
3-1/4
4
6
7-3/4
80
100
150
200
OAL
STOCK #
6-3/4"
8-1/4"
10-1/2"
13"
WH16091
WH16092
WH16093
WH16094
• 12 per pack
IN.
MM
1/8"
11/64"
7/32"
17/64"
3
3-1/2
4
5
75
90
100
125
6-1/2"
7-1/4"
7-3/4"
9-1/4"
WH16083
WH16084
WH16085
WH16086
11/32"
25/64"
9/16"
6
7
10
150
175
250
10-1/2"
11-1/2"
15-1/4"
WH16087
WH16088
WH16090
6 PC. SCREWDRIVER SET
WOOD HANDLE
in Countertop or Hangup Display Box
SET COMPRISES 1 EACH:
SLOTTED
11/64" x 7-1/4", 7/32" x 7-3/4",
17/64" x 9-1/4", 11/32" x 10-1/2" WH16095
• 12 per pack
E
PHILLIPS
1" x 6-3/4", 2" x 8-1/4"
Screwdrivers
• 1 per set
NUT DRIVERS
PROFESSIONAL HOLLOW SHAFT NUT DRIVERS
• Cr-va steel • Chrome plated • Heat treated
Features
• Precision made, one piece shaft eliminates tip
breakage — assures positive fit and extra long life.
Expanded
Offering!
• Hollow shaft accommodates longer bolts
and studs.
• Chrome plated to retard rust.
• Large ergonomic handle assures maximum comfort.
INCH SIZES
NUT
SIZE
3/16"
1/4"
5/16"
11/32"
3/8"
7/16"
1/2"
METRIC SIZES
STOCK #
OAL
SHAFT
LENGTH
BULK
WITH HANGER
6-1/2"
6-1/2"
6-1/2"
6-1/2"
6-1/2"
7-1/4"
7-1/4"
3"
3"
3"
3"
3"
3"
3"
ND180
ND182
ND185
ND187
ND189
ND191
ND193
ND180H
ND182H
ND185H
ND187H
ND189H
ND191H
ND193H
7 pc. Set in Pouch
contains 1 each:
3/16",1/4", 5/16", 11/32",
3/8", 7/16", 1/2"
• Bulk 12 per box
• Hanger 1 per plastic hanger
Complete listing of screwdriver
sets and merchandisers are
shown on pages E-29 & E-30.
ND195
STOCK #
NUT
SIZE MM
OAL
SHAFT
LENGTH
BULK
WITH HANGER
5.5
6.0
7.0
8.0
9.0
10.0
11.0
13.0
8-1/2"
8-1/2"
9-1/2"
9-1/2"
9-1/2"
9-1/2"
9-3/4"
9-3/4"
5"
5"
5"
5"
5"
5"
5"
5"
ND160
ND161
ND162
ND163
ND164
ND165
ND166
ND167
ND160H
ND161H
ND162H
ND163H
ND164H
ND165H
ND166H
ND167H
• Bulk 12 per box
• Hanger 1 per plastic hanger
Stock No.
ND182H
1/4"
All ScrewTech Nutdrivers are
available with plastic hangers
for peg hook display.
Plastic hangers show product
size, style and stock number.
E-25
SCREWDRIVERS
SCREWDRIVERS CONFORM TO ASME B107.31M – 1997 SPECIFICATIONS
Features
Fluted, tapered, large crystal
GOLD GRIP for utmost comfort and
maximum torque
• Crystal ergonomic gold grip
handles, shock and impact
resistant.
• Chrome Vanadium Tool Steel
blade, sand blasted, plated,
heat treated for durability.
MADE
Black Oxide Precision Tip
• Precision tips, black oxide
finish for perfect fit.
.A.
IN U.S
Available in popular sizes and tips as listed.
Special tips and lengths available on request.
• Comfortable thumb rest.
PHILLIPS
SLOTTED
MADE IN U.S.A.
MADE IN U.S.A.
TIP
SIZE
Screwdrivers
E
BLADE BLADE
SIZE
LENGTH
STOCK #
OAL
BULK
W/HANGER
#1
3/16"
3"
6-1/8"
SCD201
SCD201H
#1
3/16"
6"
9-1/8"
SCD202
SCD202H
#2
1/4"
4"
7-1/2"
SCD203
SCD203H
#2
1/4"
6"
9-1/2"
SCD204
SCD204H
#3
5/16"
6"
10"
SCD205
SCD205H
#4
3/8"
8"
12-5/16" SCD206
SCD206H
BLADE
LENGTH
BLADE
SIZE
3/16"
3/16"
3"
6-1/8"
SCD120
SCD120H
1/4"
1/4"
4"
7-1/2"
SCD121
SCD121H
SCD122H
1/4"
1-1/2"
3-1/4"
OAL
BULK
W/HANGER
1/4"
1/4"
6"
9-1/2"
SCD122
5/16"
5/16"
6"
10"
SCD123
SCD123H
3/8"
3/8"
8"
12-3/8"
SCD124
SCD124H
3/8"
3/8"
10"
14-3/8"
SCD125
SCD125H
STUBBY PHILLIPS
#2
STOCK #
TIP
SIZE
STUBBY SLOTTED
SCD210
SCD210H
ACR® PHILLIPS
1/4"
1/4"
1-1/2"
3-1/4"
SCD127
SCD127H
• 12 per pack
#1
1/4"
3-1/2"
7"
SCD112
SCD112H
#2
1/4"
4"
7-1/2"
SCD113
SCD113H
#3
5/16"
6"
10"
SCD114
SCD114H
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD204H
PHILLIPS TAMPER PROOF
#2
1/4"
6"
9-1/2"
SCD116
SCD116H
#3
5/16"
6"
10"
SCD118
SCD118H
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD204H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD142H
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD201H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD142H
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD201H
• 12 per pack
18 PC. SLOTTED DISPLAY STOCK # SCDSL18
Contains 3 each
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD204H
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD204H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD142H
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD201H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD142H
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD201H
3/16" x 6-1/8"
SCD120H
5/16" x 10"
SCD123H
1/4" x 7-1/2"
SCD121H
3/8" x 12-3/8"
SCD124H
1/4" x 9-1/2"
SCD122H
3/8" x 14-3/8"
SCD125H
All ScrewTech Screwdrivers are available with
plastic hangers for peg hook display.
18 PC. PHILLIPS DISPLAY STOCK # SCDP18
Stock No.
SCD204H
Stock No.
SCD125H
No.2
Contains 3 each
#1 x 6-1/8"
SCD201H
#2 x 9-1/2"
SCD204H
#1 x 9-1/8"
SCD202H
#3 x 10"
SCD205H
#2 x 7-1/2"
SCD203H
Stock No.
SCD205H
T-10
Stock No.
SCD124H
No.3
Stock No.
SCD203H
T-15
Stock No.
ND185H
5/16"
No.1
Stock No.
SCD143H
3/8"
Stock No.
SCD123H
Stock No.
SCD201H
Stock No.
SCD142H
3/8"
Stock No.
SCD122H
No.2
Stock No.
SCD120H
5/16"
3/16"
Stock No.
SCD121H
1/4"
1/4"
#4 x 12-5/16" SCD206H
Plastic hangers show
product size, style
and stock number.
E-26
SCREWDRIVERS
SCREWDRIVERS CONFORM TO ASME B107.31M – 1997 SPECIFICATIONS
TORX®
SQUARE RECESS
MADE IN U.S.A.
MADE IN U.S.A.
Stock No.
SCD204H
No.2
TIP
SIZE
BLADE
SIZE
BLADE
LENGTH
OAL
T10
3/16"
3"
T15
3/16"
3"
T20
3/16"
T25
STOCK #
BULK
W/HANGER
TIP
SIZE
BLADE
SIZE
BLADE
LENGTH
OAL
6-1/8"
SCD142
SCD142H
#1
1/4"
6"
6-1/8"
SCD143
SCD143H
#2
1/4"
6"
3"
6-1/8"
SCD144
SCD144H
#3
5/16"
3/16"
3"
6-1/8"
SCD145
SCD145H
#1
T27
1/4"
4"
7-1/2"
SCD146
SCD146H
T30
1/4"
4"
7-1/2"
SCD147
SCD147H
• 12 per pack
STOCK #
BULK
W/HANGER
9-1/2"
SCD130
SCD130H
9-1/2"
SCD131
SCD131H
6"
9-1/2"
SCD132
SCD132H
1/4"
8"
11-1/2"
SCD133
SCD133H
#2
1/4"
8"
11-1/2"
SCD134
SCD134H
#3
5/16"
8"
12"
SCD135
SCD135H
• 12 per pack
POZIDRIV®
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD204H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD142H
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD204H
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD201H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD142H
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD201H
MADE IN U.S.A.
18 PC. TORX® DISPLAY STOCK # SCDTX18
T10 x 6-1/8"
SCD142H
T25 x 6-1/8"
SCD145H
T15 x 6-1/8"
SCD143H
T27 x 7-1/2"
SCD146H
T20 x 6-1/8"
SCD144H
T30 x 7-1/2"
SCD147H
Plastic hangers
show product
size, style and
stock number.
#1
3/16"
3"
6-1/2"
SCD170
SCD170H
#2
1/4"
3"
6-1/2"
SCD171
SCD171H
#3
1/4"
3"
6-1/2"
SCD172
SCD172H
#1
1/4"
4"
8"
SCD173
SCD173H
#2
1/4"
4"
8"
SCD174
SCD174H
#3
1/4"
4"
8"
SCD175
SCD175H
• 12 per pack
SPANNER
TORX® TAMPER PROOF
MADE IN U.S.A.
MADE IN U.S.A.
TT10
3/16"
3"
6-1/8"
SCD160
SCD160H
TT15
3/16"
3"
6-1/8"
SCD161
SCD161H
TT20
3/16"
3"
6-1/8"
SCD162
SCD162H
TT25
3/16"
3"
6-1/8"
SCD163
SCD163H
TT27
1/4"
4"
7-1/2"
SCD164
SCD164H
TT30
1/4"
4"
7-1/2"
SCD165
SCD165H
#4
1/4"
3"
6-5/8"
SCD150
SCD150H
#6
1/4"
4"
8"
SCD151
SCD151H
#8
1/4"
4"
8"
SCD152
SCD152H
#10
1/4"
4"
8"
SCD153
SCD153H
#12
1/4"
4"
8"
SCD154
SCD154H
#14
1/4"
4"
8"
SCD155
SCD155H
4"
7-1/4"
SCD180
SCD180H
3"
6-1/2"
SCD184
SCD184H
• 12 per pack
• 12 per pack
TACK PULLER
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD204H
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD204H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD142H
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD201H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD142H
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD201H
Claw
1/4"
• 12 per pack
AWL POINT
18 PC. TORX® TAMPERPROOF DISPLAY
STOCK # SCDTX18T
Contains 3 each
TT10 x 6-1/8"
SCD160H
TT25 x 6-1/8"
SCD163H
TT15 x 6-1/8"
SCD161H
TT27 x 7-1/2"
SCD164H
TT20 x 6-1/8"
SCD162H
TT30 x 7-1/2"
SCD165H
AWL PT.
1/4"
• 12 per pack
E-27
E
Screwdrivers
Contains 3 each
All ScrewTech
Screwdrivers are
available with
plastic hangers
for peg hook
display.
SCREWDRIVERS
NEW TECHNOLOGY • FUNCTIONAL DESIGN • EXCEPTIONAL GRIP
2 Component Integrally Molded PPC Handle • CR-VA Blades • Black Tips
Made in Germany
TORX® HEAVY DUTY
PHILLIPS HEAVY DUTY
PH No.3 Chrom-Van.
Tx. 30 Chrom-Van.
with Hex Bolster
#1
#2
#3
3.15"
4"
6"
OVERALL LENGTH
IN.
MM
80
100
150
6.7"
8"
10"
170
200
260
STOCK #
OPT16025
OPT16026
OPT16027
• 12 per pack
PHILLIPS INDUSTRIAL
PH No.3 Chrom-Van.
TIP BLADE LENGTH
SIZE
IN.
MM
#0
#1
#2
#3
E
2.36"
3.15"
4"
6"
OVERALL LENGTH
IN.
MM
60
80
100
150
5.5"
6.7"
8"
10.5"
140
170
200
260
Screwdrivers
T8
T10
T15
T20
T25
T27
T30
3.14"
3.14"
3.14"
4"
4"
4.25"
4.5"
OVERALL LENGTH
IN.
MM
80
80
80
100
100
110
115
6.25"
6.25"
6.25"
7.5"
7.5"
7.75"
8.5"
STOCK #
160
160
160
190
190
200
215
OPT16055
OPT16056
OPT16057
OPT16058
OPT16059
OPT16060
OPT16061
• 12 per pack
ELECTRICIAN’S
SCREWDRIVERS
SLOTTED
OPT16030
OPT16031
OPT16032
OPT16033
150 x 7 Chrom-Van.
AC 1000 volts
TIP SIZE BLADE LENGTH OVERALL LENGTH
IN. MM
IN.
MM
IN.
MM
SLOTTED HEAVY DUTY
175 x 10 Chrom-Van.
with Hex Bolster
IN. MM
IN.
MM
IN.
MM
5.5
7
9
10
TIP BLADE LENGTH
SIZE
IN.
MM
STOCK #
• 12 per pack
.217"
.276"
.354"
.394"
175 x 10 Chrom-Van.
TIP BLADE LENGTH
SIZE
IN.
MM
4"
5"
6"
7"
100
125
150
175
7.5"
9"
10"
11.25"
190
225
260
285
.100"
.150"
.220"
.250"
2.5
4.0
5.5
6.5
3"
4"
5"
6"
75
100
125
150
6.1"
7.5"
9"
10.5"
155
190
225
262
STOCK #
OPT16070
OPT16071
OPT16072
OPT16073
PHILLIPS
STOCK #
PH No.3 Chrom-Van.
OPT16037
OPT16038
OPT16039
OPT16040
• 12 per pack
AC 1000 volts
TIP BLADE LENGTH
SIZE
IN.
MM
#0
#1
#2
SLOTTED INDUSTRIAL
2.36"
3.15"
4"
60
80
100
OVERALL LENGTH
IN.
MM
5.5"
6.7"
8"
140
170
200
STOCK #
OPT16077
OPT16078
OPT16079
• 12 per pack
175 x 10 Chrom-Van.
IN. MM
IN.
MM
IN.
MM
.197"
.236"
.276"
.315"
.354"
.394"
5
6
7
8
9
10
3"
4"
5"
6"
7"
8"
75
100
125
150
175
200
5"
7.5"
9"
10.5"
11.25"
12.25"
165
190
225
262
287
312
7 Piece Screwdriver Sets
STOCK #
OPT16044
OPT16045
OPT16046
OPT16047
OPT16048
OPT16049
• 12 per pack
SQUARE RECESS
150 x 7 Chrom-Van.
7 pc. sets in countertop or hang-up display box
available in popular tip styles
INDIVIDUAL
STOCK #
SLOTTED
OPT16044
OPT16045
OPT16046
OPT16047
PHILLIPS
OPT16031
OPT16032
OPT16033
TORX
OPT16055
OPT16056
OPT16057
OPT16058
OPT16059
OPT16060
OPT16061
TIP
SIZE
BLADE
LENGTH
OAL
SET STOCK #
3/16"
15/64"
9/32"
5/16"
3"
4"
5"
6"
5"
7.5"
9"
10.5"
OPT16080
#1
#2
#3
3.15"
4"
6"
6.7"
8"
10.5"
T8
T10
T15
T20
T25
T27
T30
3.14"
3.14"
3.14"
4"
4"
4.25"
4.5"
6.25"
6.25"
6.25"
7.5"
7.5"
7.75"
8.5"
®
TIP BLADE LENGTH
SIZE
IN
MM
#0
#1
#2
#3
2.36"
3.15"
4"
6"
• 12 per pack
E-28
60
80
100
150
OVERALL LENGTH
IN
MM
5.5"
6.9"
8"
10.5"
140
170
200
260
STOCK #
OPT16064
OPT16065
OPT16066
OPT16067
OPT16081
For Electrician’s Screwdirver Set – See page E-29
PROFESSIONAL SCREWDRIVER SETS
CHROME VANADIUM BLADES • PRECISION CHROMED HARDENED POINTS
COMFORTABLE ERGONOMIC SHAPE HANDLES
An assortment of 6 & 7 piece screwdriver sets available in
popular tip styles in countertop / hang-up displays.
SETS
DESCRIPTION
STOCK #
Set contains 1 each:
(Tip size x OAL)
HARDWOOD HANDLE
SLOTTED
in countertop or hang-up display box
11/64" x 7-1/4", 7/32" x 7-3/4",
17/64" x 9-1/4", 11/32" x 10-1/2"
Made in Germany
WH16095
PHILLIPS
#1 x 6-3/4", #2 x 8-1/4"
(Tip size x OAL)
7 PC. SCREWDRIVER SETS
2 COMPONENT
ERGONOMIC HANDLE
SLOTTED
3/16" x 5", 15/64" x 7-1/2", 9/32" x 9",
5/16" x 10-1/2"
PHILLIPS
Made in Germany
#1 x 6-3/4", #2 x 8", #3 x 10-1/2"
OPT16080
E
Made in Germany
(Tip size x OAL)
TORX®
T8 x 6-1/4", T10 x 6-1/4",
T15 x 6-1/4", T20 x 7-1/2", T25 x 7-1/2",
T27 x 7-3/4", T30 x 8-1/2"
Screwdriver Sets
2 COMPONENT
ERGONOMIC HANDLE
OPT16081
(Tip size x OAL)
ELECTRICIAN'S
2 COMPONENT
ERGONOMIC HANDLE
INSULATED BLADES
SLOTTED
1/16" x 6", 1/8" x 7-1/2",
3/16" x 9",
1/4" x 10-1/2"
OPT16082
PHILLIPS
#0 x 5-1/2", #1 x 6-3/4", #2 x 8"
Made in Germany
(Tip size x OAL)
SLOTTED
CRYSTAL GOLD GRIP
ERGONOMIC HANDLE
1/4" x 7-1/2", 1/4" x 9-1/2", 5/16" x 10",
3/8" x 12-3/8"
#1 x 9-1/8", #2 x 7-1/2", #3 x 10"
SCD188
PHILLIPS
Made in USA
®
6 PC. TORX SCREWDRIVER SET
CRYSTAL GOLD GRIP
ERGONOMIC HANDLE
Made in USA
(Tip size x OAL)
TORX®
T10 x 6-1/8", T15 x 6-1/8",
T20 x 6-1/8",
T-25 x 6-1/8",
T27 x 7-1/2", T30 x 7-1/2"
SCD189
E-29
WALL DISPLAYS
ASSORTMENT OF POPULAR SCREWTECH® SCREWDRIVERS &
NUT DRIVER DISPLAYS
Each display includes
wire rack & header card.
PHILLIPS & SLOTTED
SCREWDRIVERS
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD204H
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD204H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD142H
No.3
No.1
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD201H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD142H
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD201H
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD150H
1/4"
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD151H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD152H
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD153H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD154H
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD155H
No.2
18 PC. PHILLIPS & SLOTTED
18 PC. ACR® PHILLIPS & POZIDRIV®
DISPLAY STOCK # SCDPS18
DISPLAY STOCK # SCDPP18
Contains 3 each
Contains 3 each
Phillips
Slotted
ACR® Phillips
Pozidriv®
#1 x 6-1/8"
SCD201H
1/4" x 7-1/2"
SCD121H
#1 x 7"
SCD112H
#1 x 8"
SCD173H
#2 x 7-1/2"
SCD203H
5/16" x 10"
SCD123H
#2 x 7-1/2"
SCD113H
#2 x 8"
SCD174H
#3 x 10"
SCD205H
3/8" x 12-3/8"
SCD124H
#3 x 10"
SCD114H
#3 x 8"
SCD175H
E
Wall Displays
SPANNER
SCREWDRIVERS
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD130H
No.1
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD131H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD132H
No.3
No.2
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD133H
No.1
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD134H
No.2
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD135H
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD204H
No.3
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD204H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD142H
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD201H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD142H
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD201H
18 PC. SQUARE RECESS
18 PC. SPANNER
DISPLAY STOCK # SCDSQ18
DISPLAY STOCK # SCDSP18
Contains 3 each
Contains 3 each
#1 x 9-1/2"
SCD130H
#1 x 11-1/2"
SCD133H
#4 x 6-5/8"
SCD150H
#10 x 8"
SCD153H
#2 x 9-1/2"
SCD131H
#2 x 11-1/2"
SCD134H
#6 x 8"
SCD151H
#12 x 8"
SCD154H
#3 x 9-1/2"
SCD132H
#3 x 12"
SCD135H
#8 x 8"
SCD152H
#14 x 8"
SCD155H
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD204H
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
SCD204H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD142H
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD201H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
SCD142H
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
SCD201H
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
StockSCD204H
No.
SCD204H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
StockSCD201H
No.
SCD201H
Stock No.
StockSCD142H
No.
SCD142H
Stock No.
StockSCD201H
No.
SCD201H
18 PC. NUT DRIVER INCH SIZES
24 PC. NUT DRIVER METRIC SIZES
DISPLAY STOCK # ND32
DISPLAY STOCK # ND32M
Contains 3 each
Contains 3 each
3/16" x 6-1/2"
ND180H
3/8" x 6-1/2"
ND189H
5.5mm x 8-1/2" ND160H
9.0mm x 9-1/2"
ND164H
1/4" x 6-1/2"
ND182H
7/16" x 7-1/4"
ND191H
6.0mm x 8-1/2" ND161H
10.0mm x 9-1/2"
ND165H
5/16" x 6-1/2"
ND185H
1/2" x 7-1/4"
ND193H
7.0mm x 9-1/2" ND162H
11.0mm x 9-3/4"
ND166H
8.0mm x 9-1/2" ND163H
13.0mm x 9-3/4"
ND167H
E-30
SCREWDRIVER DISPENSERS
Create Your Own Screwdriver Display!
• Sturdy wire rack suitable for counter and
pegboard display.
• Displays 35 screwdrivers for easy viewing
and selection.
• Double tier shelf keeps screwdrivers
organized and upright.
• Create custom screwdriver assortment.
• Use multiple racks to create displays of
different screwdriver styles and sizes.
• Great impulse item display for
sales counter and checkout lanes.
• Header cards available for Alfa Tools,
ScrewTech® and Opticraft® brands.
• Compact display maximizes
selling space.
E
Screwdriver Dispensers
Steel Display Stand
# SDD28
Load 35 ScrewTech®
Screwdrivers of your
choice.
SELF STANDING OR
PEG BOARD HUNG
DIAL-A-BIT DISPENSERS
• All bits are made of a shock resistant tool steel and heat treated.
• Durable plastic containers are easily stored in tool boxes.
• Lid dials to release individual bits.
• Attractive point-of-purchase counter display.
In Counter Display
HSB66711D
DESCRIPTION
DIAL-A-BIT
STOCK #
DISPLAY
STOCK #
Each Kit Contains 1 ea:
#1, #2, #3
Phillips
6-8, 8-10, 10-12
Slotted
T10, T15, T20
Torx®
2-5/8" OAL
Magnetic Bit Holder
HSB66711
HSB66711D
See E-12
HSB66711
• 12 Dial-A-Bit Kits per display
E-31
ALL-PURPOSE TOOL KIT
ACCESSORIES FOR CORDLESS POWER TOOLS
The Monolock quick change system
provides a wide range of instant chucking
accessories and screwdriving tools.
1/4" Hex power shank tool bits for metal,
wood and masonry work.
– High speed steel drill bits for metal.
– Carbide tipped drill bits for masonry.
– CR-VA spade bits for wood.
32 PC. MONOLOCK™ TOOL KIT
E
Tool Kit
In a handy, impact-resistant storage case
QTY.
DESCRIPTION
The 32 Pc. All-Purpose Tool Kit
STOCK #
MLK32
The kit contains the following:
1
Monolock™ Quick Change Chuck
5
HSS drill bits:
1/16", 3/32", 1/8", 3/16", 1/4"
3
Masonry Drill Bits – Carbide Tipped
3/16", 1/4", 3/8"
3
Spade bits – CR-VA
3/8", 1/2", 3/4"
9
Hex Power Bits – 1/4" Hex x 2" OAL
Phillips – #1, 2, 3
Slotted – 3/16", 1/4"
Torx® – T15, T20
Square Recess – #1, 2
1
Magnetic 1/4" Hex Insert Bit Holder
7
Nutdrivers – 1/4" Hex x 1-1/2" OAL
3/16", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16"
1
Hex Socket Extension
1/4" Hex Shank x 1/4" Square Drive
1
90O Countersink
1
Impact-Resistant Storage Case
5-1/4" x 8" x 2"
E-32
THE
CHUCK
Strong, sturdy, heavy duty
Comfortable non-slip pull back sleeve
allows 1/4" hex shank tools and inserts
to slip snugly into lock-in position.
Chuck has a 1/4" hex power shank,
enabling its use in any power tool
with 1/4" hex capability.
STOCK # HSA51071
• 1 per pack

Tools Unlimited

Transcription

Similar documents

Screw Driving Tools