sabre d18 32 - Grant Fidelity
Transcription
sabre d18 32 - Grant Fidelity
SABRE D18 32 --- User Manual Of SABRE D18 Reference 32-bit Audio DAC For a better experience with this product, please read this manual carefully before using it, and keep it for future reference. Http://www.audio-sz.com SABRE D18 32 --- SABRE D18 ESS9018 32 DAC ESS9018 DAC TM 32BIT Hyperstream DAC 135dB -120dB ESS9018 SABRE D18 SABRE D18 plitron DAC DAC AD8620 LPF DALE LPF TPC IV AD797 WIMA FC 1 SABRE D18 PCB PCB SMA ESS9018 250*180*55mm SABRE A18 SABRE SABRE A10 DAC SABRE D18 ESS9018 SABRE D18 SABRE D18 2 3 1 2 3 4 5 AES/EBU 6 SPDIF AES/EBU 7 8 9 SPDIF 10 CD/DVD/DAT/ CD/DVD/DAT/ 11 AES/EBU 12 100V-120V/220V/240V/50HZ/60HZ 13 14 100V-120V/220V/240V/50HZ/60HZ / 4 / !!! SPDIF SPDIF 32-192KHZ/16/24/32 Bit > -130dB 130dB <0.0003% Unbalanced 20-30KHz-0.1dB Balance 20-20KHz -1db <20W 250*180*55mm 2.3KG 5 Thank you for choosing SABRE D18 as Digital to Analog Converter, and we believe this product will bring you into a brand new audio journey. The DAC solution of the SABRE D18 we used is the 32-bit audio DAC ESS9018 which represents the highest performace in the world.(With ESS patented 32-bit HyperstreamTM DAC architecture and Time Domain Jitter Eliminator, the SABRE32 Reference Stereo DAC delivers an unprecedented DNR of up to 135dB and THD+N of -120dB, the industry's highest performance level that will satisfy the most demanding audio enthusiasts.) After a long time of research and development, YuLong Audio finally worked out SABRE D18 with high quality and vivid music feeling by using ESS9018. The SABRE D18 uses the high-performance transformer with low magnetic flux leakage whose brand is PLITRON from Canada as the driving force. The DAC digital signal circuit uses the extremly low-noise power through the multiple groups of the secondary voltage-stabilizing.The DAC analog circuit uses the high-speed and precise servo voltagestabilized source. The IV conversion uses the expensive, precise and high-performance op-amp AD8620.The filter processing of LPF uses the expensive, precise and high-performance op-amp AD797.The precise risistances with military specification use the DALE. The film capacitors with multipe specifications use the WIMA. They are selected to match to be used in the LPF. The TPC film capacitor is used as the decoupling and the Panasonic FC electrolytic capacitor is used as the power filtering. The benchmark source crystal that is used to eliminate the clok jitter is customized by the crystals manufacturer and its phase noise is very low. In order to achieve the best performance and good sense of hearing, the PCB has been tested for many times to optimize the layout. For example, to obtain the best signal quality, the layout of the digital signal transmission is not directly placed in the PCB, the transmission line of the SMA interface is used as the transmission. 6 The SABRE D18 has a small size(250*180*55mm).The shell of the SABRE D18 uses the aluminium alloy mould to stretch the forming and the thicken material. It uses the fine surface treatment technology.(The volume of the SABRE D18 is suitable and compatible with the other SABRE products made by Yulong Audio, such as the headphone amplifier SABRE A18 and the power amplifier SABRE A10.) The material selected is nothing but an assurance of the quality, the debugging and designment of the circuit can finally represent the essential of the high quality. The designment of the SABRE D18 is based on our rich experience of the DAC development. With the help of the digital audio analyzer, Universal Table, Spectrum Analyzer, Broadband oscilloscope, and the other equipments, we can analyze the basic performance index of the SABRE D18, debug the reference voltage , analyze the digital signal and measure the electromagnetic compatibility. After a long time of debugging, we believe that the SABRE D18 can play close to the limit performance of the ESS9018. The data is just data, it comes from a soulless machine which has no idea on music In order to move from the cold solid data to touching music playback, we must make acoustical adjustment through hearing test, using the sense of our experience. Yulong Audio has its own acoustical tuning team that is made up of acoustic engineers, senior audio fanciers and experienced music lovers. With their extensive listening tests and fine tunes, the SABRE D18 is able to play back music with rich emotional elements and graceful charm, give an elegant listening impression. Although the SABRE D18 has an extremely extended high frequency response, the voice is no where from harsh but soft and delicate. Combine with it's full and vivid mid range, and well managed bass, the playback is well-balanced, natural and smooth, it gives the evidence that SABRE D18 is a high-performance DAC with an extreme pleasure of listening. 7 The Panel Figure 8 Operating Instructions 1. Power switch and power indicator 2. Signal lock indicator 3. Coaxial input indicator 4. Optical input indicator 5. AES/EBU input indicator 6. Input selection: Turn the knob to select input from Optical S/PDIF AES/EBU 7. Unbalanced Analog Audio Output, to connect a headphone amplifier to drive headphone, or a power amplifier to drive the speakers. 8. Balanced Analog Audio Output, to connect amplifiers or other equipments with balanced inputs. 9. S/PDIF Input, to connect digital source with an unbalanced output, such as CD, DVD, DAT or sound card. 10. Optical Input, to connect digital source with an Optical output, such as CD, DVD, DAT or sound card. 11. AES/EBU Digital Input, to connect digital source with a balanced output. 12. Voltage selector: Use a tool to select suitable voltage. Voltage can be set to 110-120V, and 220-240V, 50 or 60HZ. 13. AC power input 14. Fused Power socket. There is a spare fuse in it that can be used when necessary Warning: Voltage selector: Use a tool to select suitable voltage. Voltage can be set to 110-120V, and 220-240V, 50/60HZ.. Please make sure the voltage selector is set to proper position that can match the actual power supply voltage. Otherwise this DAC might be permanently damaged! Under such circumstance, the warranty is void. ***Notice: Both of the RCA and XLR line level outputs are NOT controlled by the Volume, and it is always in full output level. Any equipment connected to these outputs must has a proper volume control, otherwise it might be damaged. It might harm the hearing of audience too. We are not responsible for any kind of such results. 9 Technical Specifications of SABRE D18 Inputs: Optical, Coaxial,AES/EBU Input Digital Signal Format: 32-192 KHz, 16/24/32 Bit auto detection. SNR: >-130dB. Dynamic Range: 130dB. THD+N: <0.0003% Frequency Response: Unbalanced: 20-30KHz-0.1dB Balance: 20-20KHz -1db Power Consumption: <20W. Dimensions: 250*180*55mm. Net Weight: 2.3Kg Packing Size: 300 * 300 * 100mm The packaging Includes: this DAC, User manual, Power Cable 10 dScope Series III digital audio analyzer Test chart 11 12 13 SHENZHEN YULONG Audio ELECTRONICS CO.,LTD. Contact person: YuLong Zhang Mobile: 86(0)13570857228 Tel: 86-0755-28895692 QQ 87553183 MSN [email protected] Email: [email protected] Http://www.audio-sz.com