Aquadisc - mounting

2014 06 13
1
Aquadisc - mounting
LI GHT I N G
Båtsystem AB, Traneredsvägen 112, 426 53 Västra Frölunda, Sweden
Tel: +46 31-69 03 80, Fax: +46 31-69 00 97, www.batsystem.se, [email protected]
Aquadisc can be mounted on boathull, pools,
bridges etc.
IMPORTANT!
• Aquadisc is for underwater use only.
Working temperature 0 - 40°C.
• Clean with soft brush
NO pressure washer!
Aquadisc
• 1 stabilizer/Aquadisc
Ø104
7
20
Ø125
8 LED, 12-24V, 16W
9555
IP 68 water proof.
•Spacer MUST be used!
• NO Bottom paint on the Aquadisc!
Natural
convective
waterflow
20 mm
(do not bend)
3,5 mm
SIKAFLEX
x3 (4,2x25 mm)
Spacers
MUST
be used!
KABEL / CABLE
2
2.5MM
WATER / VATTEN
0 - 40°C
12.5V/4A
STABILISATOR
STABILIZER
STRÖMBRYTARE / SWITCH
SÄKRINGSCENTRAL (3A)
FUSECENTRAL (3AMP)
12V/24V BATTERI
12V/24V BATTERY
1 stabilizer/
Aquadisc
2014 06 10
2
Template / mall
Print 100%