Catalog AFL11 - Strobes-R-Us

Transcription

Catalog AFL11
®
In this Catalog
TABLE OF CONTENTS
Strobe Beacons . . . . . . . . . . . . . . . . . . . . . . . 3
Super-LED® Beacons . . . . . . . . . . . . . . . . . . . 4
Rotating Beacons . . . . . . . . . . . . . . . . . . . . . 4
Dash and Deck Lighting . . . . . . . . . . . . . . . 5-6
BEACONS
360° Warning . . . . . . . . . . . . . . . . . . . . . . . . 6
Directional . . . . . . . . . . . . . . . . . . . . . . . 7-10
Special Application . . . . . . . . . . . . . . . . 11-12
LIGHTHEADS
POWER SUPPLIES
& FLASHERS
Power Supplies . . . . . . . . . . . . . . . . . . . . . . 13
Halogen & LED Flashers . . . . . . . . . . . 14 & 35
BACKUP ALARMS
Backup Alarms . . . . . . . . . . . . . . . . . . . . . . 14
LIGHTBARS
Justice® Series . . . . . . . . . . . . . . . . . . . . . . 15
Liberty™ Series . . . . . . . . . . . . . . . . . . . . . 16
Ultra Freedom™ . . . . . . . . . . . . . . . . . . . . . 17
9M Strobe Series . . . . . . . . . . . . . . . . . . . . 18
Serial Communication . . . . . . . . . . . . . . . . . 19
Lightbar Options . . . . . . . . . . . . . . . . . . . . . 20
Special Application Lighting . . . . . . . . . . . . . 20
Mini Lightbars . . . . . . . . . . . . . . . . . . . . . . 21
Inner Edge® Series . . . . . . . . . . . . . . . . 22-23
L40 & 41 Series Beacons..Page 4.......
ION™ Lighthead..Page 5..................
SpitFire™ ION...Page 5...............................
4" Round...Page 7...........................
8" Round Compartment Light...Page 8.....
3" Round Compartment Light...Page 8.......
TRAFFIC ADVISORS Traffic Advisors™ . . . . . . . . . . . . . . . . . . 24-26
Fluorent™ & Flurorent Plus™...Page 8......
SIRENS, SPEAKERS
& CONTROLS
Siren Amplifiers . . . . . . . . . . . . . . . . . . 26-28
Power Control Centers & Switches . . . . . . . . 29
Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . 30
6" Round Interior Light...Page 8..........
LIGHTING &
ELECTRONIC SIREN
SYSTEMS
Motorcycle Products . . . . . . . . . . . . . . . . . .
Snow Plow Lighting . . . . . . . . . . . . . . . . . . .
DOT3® Super-LED Systems . . . . . . . . . . . . . .
NFPA Packages for Fire & Rescue . . . . . . . .
Ambulance Systems . . . . . . . . . . . . . . . . . .
M2 Surface Mount Lighthead...Page 9..........
31
31
32
34
35
M9 Stead-Burn Lighthead...Page 9.....
M9 Surface Mount Scenelight...Page 9.....
Smart
®
Look for the SmartLED® logo for lightheads
that do not need an external flasher.
Look for the Made To Order
logo for special order products.
900 Series Surface Mount Scenelight...Page 11....
Whelen Work Lights...Page 12..................
PAR-46 Spotlights...Page 13......................................
For over fifty years Whelen has proudly designed and manufactured emergency
warning products in America. Now we are pleased to be the title sponsor of one of
the great All-American sports, the NASCAR® Whelen Modified Tour, the NASCAR
Whelen Southern Modified Tour and now the recently added NASCAR Whelen
All-American Series. This is our way of saluting not only the legends
of NASCAR but also the dedicated professionals, Fire and EMS, Law Enforcement
and Rescue Personnel that are every day heroes for us all.
Our goal is to make your job safer with the most reliable and effective warning
equipment available. As the Officially Licensed Warning Lights of NASCAR, we
hope you'll enjoy our lights on pace cars and racetrack equipment at tracks around
the country.
For news and racing schedules, visit our web site and click on "Motorsports."
Pillar Mount Outer Edge®...Page 18...........
Inner Edge® Models...Page 23..........
Epsilon™ 6 & 9...Page 26............................
CanTrol™ Integrated System...Page 29.............
PCC Power Controls Page 31......
DOT3® Systems...Page 33....................
2
®
1500 Series Strobe Beacons
Class 2, SAE Certified (amber) in 12/24 VDC is available in all
safety colors with twist off domes and full reverse polarity
protection. Magnetic mount versions feature 8’ coiled cord
with cigar plug and LED “On” indicator.
Size: 3-3/4” (95mm) H x 5” (127mm) Dia.
1510MA
2519 Series Encapsulated
Strobe Beacons
2519HPG
Cut-a-way showing
encapsulation
SAE Certified with fully encapsulated electronics. LED
diagnostic indicator displays operational state of
power supply and flash tube. Multiple Scan-Lock™
flash patterns. Polycarbonate base. Automatic Hi/Low
photocell. 12/24 VDC. High or low dome.
Combination mounting for permanent, pipe and "J"
hook. Magnetic and magnetic/suction mount have
CometFlash® and high power only and supplied with
8' cord and cigar plug. Optional magnetic kit, high
and low dome branch guard, lighted switch kit, mirror mount bracket and shelf bracket mount.
Size: (High Dome): 6-13/16” (172mm) H (Low
Dome) 5-5/16” (134mm) H x 6-7/16” (163mm) Dia.
2519LPA
Strobe Beacons
Built for heavy-duty use, and reliable operation.
HEAVY DUTY
D Series Strobe Beacons
■
■
■
■
■
■
■
®
Remote Hi/Low intensity operation.
Certified to SAE and California Title XIII requirements.
Dual voltage 12/24 VDC operation.
Reverse polarity protection. Patented clamp circuit prevents
power supply damage in the event of flash tube failure.
Circuit boards are double epoxy dipped for added vibration
and moisture resistance.
Fully enclosed cast aluminum bases offers permanent, 1" NPT
pipe and spade bolt mounting.
Exclusive, five year Heavy-Duty Professional (HDP) Warranty
on power supply and two year warranty on Gold Medallion
flash tube.
PROFESSIONAL
S360DAB
S360D Super
S360DBP
Strobe®
Highest effective light intensity in its class. 30 watts output
power. Smooth outer self-cleaning dome with patented component optics. Includes Cross-Link™ Strobe Synchronization
capability. Connect up to four independent S360D strobes to
work as one system. Permanent/pipe mount standard.
Branch guard model available.
Size: 6-1/2” (165mm) H x 7-1/2” (91mm) Dia.
Weight: 3 lbs., 5 oz. (1.5kg)
800D
25 watts output power. Double fresnel
optic lens available in two dome heights.
Magnetic mount supplied with 8' straight cord
and cigar plug. Optional magnetic mount kit and
branch guard for low dome only.
Size (High Dome): 6” (152mm) H
x 5-1/2” (140mm) Dia.
Size (Low Dome): 4-1/2” (114mm) H
x 5-1/2” (140mm) Dia.
Weight: 2 lbs., 4 oz. (1kg)
800DHBP
800DLAM
800DHRP
1200D
Aerodynamic, high profile,
self-cleaning dome. 25
watts output power. Double
fresnel optic dome.
Polished aluminum base
with combination
permanent/pipe mount.
Size: 8-1/2” (216mm) H x
7” (178mm) Dia.
Weight: 3 lbs., 5 oz. (1.5kg)
1200DHAP
1200DHRP
NOTE: The use of a magnetic mounted beacon on the roof of a vehicle in motion is not recommended, and is at the sole discretion and risk of the user.
3
®
360° Super-LED ® Beacons
Super bright and rivals strobe in intensity
L31HAF
L22HAP
L32LAF
L360BGB
L31, Class 1
Super-LED performance, Certified to
meet California Title XIII. Permanent
mount includes multiple built-in ScanLock™ flash patterns, steady-burn plus
4 simulated rotating patterns.
Alternately or simultaneously flash
multiple patterns. Synchronize up to
eight L31 beacons. Hi/Low intensity,
cruise lights, standard. Magnetic and
magnetic/suction mounts have 75
SignalAlert™ flash pattern only and
supplied with 10' straight cord and
cigar plug with LED indicator On/Off
switch. Optional branch guard, pipe
mount kits, mirror mount and shelf
mount brackets. 12 VDC, optional
24 VDC.
Size: 4-1/2” (102mm) H x 7-3/16”
(182mm) Dia.
L32, Class 1 (amber)
Class 2 (other colors)
Compact Super-LED permanent
mount beacon includes multiple
built-in Scan-Lock flash
patterns, steady-burn plus 4
simulated rotating patterns.
Alternately or simultaneously
flash multiple patterns.
Synchronize up to eight L32
beacons. Magnetic and magnetic/
suction mounts have 75
SignalAlert flash pattern only and
supplied with 10' straight cord
and cigar plug with LED indicator
On/Off switch. Optional pipe
mount kit, mirror mount and
shelf mount brackets. 12 VDC,
optional 24 VDC.
Size: 2-1/2” (64mm) H x 7-3/16”
(182mm) Dia.
L21, Class 1
L22, Class 2
Encapsulated Beacons. Virtually no EMI radiation.
Combination mount (permanent, pipe and J-hook), magnetic
and magnetic/suction mounts available. High & low domes
available. Combination mount has multiple Scan-Lock flash
patterns, synchronization capability and is available with photocell Hi/Low, contact factory. 12 & 24 VDC models. Optional
magnetic kit, branch guard for high and low dome, mirror
mount and shelf mount brackets and lighted switch kit mounted on bracket. Available in amber, red, blue & white.
L21 Models: Class 1. Polycarbonate and cast aluminum base
models. Magnetic and magnetic/suction mount supplied with
10' straight cord and cigar plug with LED indicator On/Off
switch plus pattern control switch.
L22 Models: Class 2. Polycarbonate base. Magnetic and
magnetic/suction mount models have 75 SignalAlert default
pattern only and does not include synchronization or pattern
control capabilities. Supplied with 10' straight cord and cigar
plug with LED indicator On/Off switch.
Size, High Dome: 6-1/2” (165mm) H x 6-3/8” (161mm) Dia.
Low Dome: 5” (125mm) H x 6-3/8” (161mm) Dia.
L40 Class 1 & CA Title XIII
L41 Class 1
Medium profile 360° Super-LED beacon with
encapsulated electronics. 12/24 VDC. 75
SignalAlert FPM default pattern, mulltiple selectable patterns. Cast aluminum, powder coated
base with permanent/pipe/J-Hook mount, magnetic mount, magnetic/suction and optional mirror mount brackets. Permanent mount has Hi/
Low and Synchronization feature. Available in
red, blue, amber or white. Magnetic mount supplied with 10' straight cord and cigar plug with
LED indicator On/Off switch and pattern selection switch.
Size: 4-3/4” (121mm) H x 5-1/2” (140mm) Dia.
L51, Class 1
L52, Class 2
L53, Class 3
L53AM
Compact 360° Super-LED beacon with twist off dome.
12 VDC. 75 SignalAlert FPM. Polycarbonate base with
permanent/pipe, magnetic mount and optional mirror
mount brackets. L51 & L52 are encapsulated and
available in amber or white. L53 is available in amber.
Magnetic mount supplied with 10' straight cord and
cigar plug with LED indicator On/Off switch.
Size: 3-3/4” (95mm) H x 5” (127mm) Dia.
Rotating Beacons
Rotating Beacons in two sizes.
Rota-Beam™
B6TMRR1P
B6TM and B6MM Series
Combination 360° warning and directional lighting in
a single polished cast aluminum housing. Lower level
700 Series Linear-LED Super-LED lighthead in a
choice of warning, in amber, red and blue, brake/tail/
turn and scenelight. B6T models have Rota-Beam,
RB6T rotating 360° warning beacon in upper section,
B6M has L31 Super-LED beacon.
Size: 8-5/8” (219mm) H x 7-13/16” (198mm) W x
8-1/2”(215mm) D. Weight: 3 lbs., 13 ozs. (1.7kg)
RB6TRP
B6MMRAP
Mid-size rotating beacon with single
reflector, snap-in style 50 watt halogen
lamp, or dual reflector 50 watt halogen.
Certified to SAE and California Title XIII
requirements. Non-corroding glass filled
nylon bases for combination flat or 1” NPT
pipe mounting. Optional magnet mount
kits. Rotator assembly has precision double ball bearing design for superior longlife performance, redesigned parabolic
reflector for increased light output and
steel base plate for optimum shock mounting and durability. Three year warranty on
motor assembly.
Size: 6-1/2” (165mm) H x 7-3/8”
(187mm) Dia.
Weight: 1 lb., 5 oz. (.55kg).
RB6PAP
4
®
FFLEDRB
SLPMMRB
FlatLighter™ LED
Slim-Miser™
High performance dash light with low cost.
Brilliant 5mm LEDs in a slim low profile housing
for deck mounting against the windshield with 3
suction cups. Multiple Scan-Lock® flash patterns. Eight foot straight cord with cigar plug
and On/Off switch with LED "On" indicator.
Available in solid or split colors. Size: 1-5/8”
(42mm) H x 2-3/4” (70mm) D x 12-7/8”
(326mm) L.
Dual LED lamp panels. Visor mount allows concealment of warning light until needed. Airbag compatible. Includes two built-in
hook and loop visor mounting straps. Multiple selectable flash
patterns. Will return back to last flash pattern selected. Built-in On/
Off switch. Color LEDs with clear outer lens, LEDs are available in
red, amber, blue, white or color combinations. Optional 400 Series
color lens for customer installation.
Size: 4-1/2” (114mm) H x 1-1/4”(32mm) D x 13”(330mm) L.
SlimLighter™ LED
Ultra slim profile dash light with dual TIR6™ Super-LED® lamp panels.
Attaches to the windshield with suction cup mounting swivel brackets or
permanently to headliner or deck. Airbag compatible. Multiple selectable
flash patterns. On/Off and pattern select switches are located on back of
assembly. Cigar plug and 8’ straight cord, standard. Includes cigar plug
with On/Off switch and LED indicator. Optional bail bracket available.
Size: 2”(52mm) H x 1-3/16”(46mm) D x 16-3/8”(416mm) L.
RB6TRP
Optional bail bracket
SLPBKT1
Dash & Deck Lighting
High intensity lighting for interior use, visible and concealed mounting.
AVNCV9JJ
Avenger™ Rear Deck Light
Dual Linear-LED lamp model that straddles third
brake light on Crown Victoria vehicles with external
low power control, 4-wire pigtail for multiple
Scan-Lock flash patterns including simultaneous,
alternating and cycle patterns with steady flash
and steady-burn.
Size: 3” (76mm) H x 5-7/8” (149mm) D x 19-5/8”
(498mm) L.
IONJ
ION™ Series
IONR
Ultra compact Super-LED water resistant light
for interior or exterior use. Available in single
and split colors and white or black housings.
Supplied with 6" pigtail. Synchronizable to other
like Whelen Sync products. Includes universal
mount: combination permanent/pedestal, clip,
edge mounts, double sided tape. Optional bail
bracket available in black or white. NEW
surface mount models available.
Size: 7/8" (22mm) H x 1-1/4" (32mm) D x 4"
(101mm) L.
AVNS2RB
SFP1J
SpitFire Plus™ Series
AVN1B
Avenger™
Series
Linear Super-LED lamps and small size and
clear outer lens makes it barely detectable until
powered on. Single, dual or split modules.
Multiple Scan-Lock flash patterns. Swivel/bail
bracket with 3 suction cups, and snap-on polycarbonate hood. Optional low profile mounting
brackets, visor mounting bracket and adjustable height bracket kit.
AVN Models: 8' cord with cigar plug On/Off
switch and Scan-Lock pattern switch.
AVNS Synchronized Models: Scan-Lock flash
patterns have Phase 1 and 2 for alternate and
simultaneous flashing. Can be synchronized
with other synchronizable products. Standard
4-wire pigtails.
Size: 2" (50mm) H x 5-1/2" (140mm) D x 5"
(127mm) L single, 9-3/4" (249mm) dual, L.
A compact, full-featured, LINZ6™ SuperLED dash and deck light with 50% more
light output in a smaller package than
the original SpitFire. SpitFire Plus is
the high performance, cost-effective
alternative to the larger Whelen Avenger
Series. Clear non-fluted lens and black
polycarbonate integral hood with bail
bracket and 2 suction cups for mounting. SmartLED® design requires no
external flasher. Multiple Scan-Lock flash
patterns, including 4 California Title XIII
and steady-burn. Alternating and
simultaneous patterns available. Solid or
split colors. Fully encapsulated. 8' cord
with cigar plug On/Off switch and pattern
control switch.
Size: 1-5/8" (40mm) H x 3-1/2" (89mm)
D x 4-3/8" (111mm) L.
SpitFire ION™ Series
SFIONJ
Ultra compact Super-LED water resistant light for interior
use. Available in single and split colors. Supplied with 8'
straight cord with cigar plug with On/Off switch with LED
"On" indicator and pattern selection switch. Synchronizable
to other like Whelen Sync products. Includes universal
bracket and windshield suction cup mount.
Size: 1-5/8" (40mm) H x 3-1/2" (89mm) D x 4-3/8"
(111mm) L.
5
®
Dash & Deck Lighting
Super-LED® lighting for interior or exterior use.
Dominator™ and Dominator Plus™ Series
TIR3™ Super-LED for the Dominator Series and super bright LINZ6™ Super-LED for the Dominator Plus Series. Available
as a six or eight light array Traffic Advisor™ or in two, four, six or eight light flashing models. Rugged aluminum housing
with slide bolt mount. Fully encapsulated and fully waterproof with internal self-contained electronics for internal or
external use. Available in red, amber, white and blue. Options include suction cup bracket and cigar plug cord kit, swivel
bracket kit, "L" angle bracket kit and rear mount kit for 2008-10 Tahoe. Size: 1-3/4” (44mm) H x 2-3/16” (60mm) D x 7”
(178mm) or 14” (356mm) or 21” (533mm) or 28” (711mm) or 48" (122cm) L.
Dominator Series with TIR3 Lightheads
D2AC
D4BBRR
Flashing models
■ Two, four, six or eight light
flashing models.
■ Multiple flash patterns and a
steady-on mode.
■ May be synchronized to each
other or to other Whelen
Synchronized products.
Optional TADCTL1 Control Head
for Traffic Advisors.
Traffic Advisor models
■ Six or eight light arrays.
■ Six light array with two end flashing modules.
■ Six direction sequences and multiple
Scan-Lock™ flash patterns.
■ Low power intensity mode.
■ Requires customer supplied switches or
Whelen’s optional TADCTL1 control head with
spaces for optional switches.
D6RBAABR
D8AAA00 (Flashing)
TAD8 (Traffic Advisor)
R1R
Dominator Plus Series with LINZ6 Lightheads
DP2BR
R2RB
Raider™ Series
DP4AAAA
DP633000
DP800800 (Flashing)
TADP8 (Traffic Advisor)
500 Series Linear Super-LED lighting available in
single or dual flashing models. Extruded aluminum housing with slide bolt mount from the top,
bottom or back of housing for versatile mounting
options. Horizontal, vertical or upside down
mounting make this the perfect light for a wide
variety of applications. Weather resistant design
makes this the ideal light for mounting externally.
Size: 2-3/8” (60mm) H x 1-7/8” (48mm) D x
5-1/2” (140mm) or 11” (279mm) L.
micro SEries
Lightheads
®
Strobe and Super-LED
Micro 9M
MC9MED2A
Micro Series
Micro Ultra Freedom
MCDLED2A
Micro Liberty
MCSLED2A
Strobe and Super-LED assemblies may be mounted to cab or mirror mount brackets.
Certified as system component to SAE & California Title 13 specifications. Two, three
and four module lightheads, with color outer lenses are designed to be used as a pair.
Heavy-duty extruded aluminum frame. Two module units provide 240°, three module
unit provides 310°, and four module units provide 360° light output. Vibration resistant.
Micro 9M: Two linear strobe assemblies. Requires remote strobe power supply.
Size: 3-1/2” (89mm) H x 10” (254mm) D x 8-3/32” (208mm) L.
Micro Freedom™: Two Linear Super-LEDs and built-in electronic flasher with
75 SignalAlert™ FPM per light module.
Size: 4” (102mm) H x 10-1/16” (256mm) D x 10” (254mm) L.
Micro Liberty™: Two or four Linear Super-LED modules and built-in
electronic flasher with 75 SignalAlert FPM per light module.
Size: 2-1/2” (64mm) H x 12” (304mm) D x 9-1/2” (241mm) L.
Micro 400
MC40ED4A
Micro 400: Three or four 400 Series Linear Super-LED modules with built-in
electronic flasher with 75 SignalAlert FPM for light module.
Size: 3-3/4” (95mm) H x 10-1/2” ( 266mm) D x 10-1/4” (260mm) L.
Optional
West
Coast
Mirror
Mount
Brackets
6
®
Smart
directional Lightheads
®
®
TIR3
Vertical
Mount
RVR03ZCR
Strobe, LED & Super-LED
TIR3 Horizontal Mount
RSR03ZCR
2” Round
TOA00MAR
LED sealed beam with flat lens in red or
amber flashing warning, compartment
lighting and amber or red clearance.
Includes a three-piece adapter kit with
2-1/2” flange for customer supplied
grommet, 3 and 3-1/2” flange. Options
include a 2” grommet (hole cutout
required) and a black or chrome surface mount flange kit. Size: 2” (51mm)
Dia.
TOA00MAR
with adapter
ring
TOCACCCR
with
TFLANGEC
3” Round
3SA00FAR
LED flashing warning in
amber, red, blue or white and
compartment lighting in
white, red and split red/white.
3" Round Series is extremely
low profile with bright illumination. Optional chrome trim
ring. Size: 3” (76mm) Dia.
TIR3™ / LIN3™ Super-LED Series
Super-LED surface mount modules are effective for a variety of applications and include black flange. Low current, vibration and moisture
resistant. Has multiple Scan-Lock™ flash patterns with Phase 1 and
Phase 2 for alternating/simultaneous flashing, for up to eight lightheads which include steady-burn and synchronize wire. Options
include: chrome, deep chrome plated and cast aluminum flange for
single lighthead, black or chrome plated flanges for dual lightheads,
single or dual mounting brackets, single lighthead swivel bracket,
trunk mount bracket, under sideview mirror bracket, license plate
brackets for horizontal and vertical mount. Vehicle specific fender
mount and motorcycle mounting available.
TIR3: Directional TIR lighting, horizontal and vertical mount.
LIN3: Linear-LED® wide angle lighting, horizontal mount.
Size: 1-1/8” (28mm) H x 1-1/4” (32mm) D x 3-1/2” (89mm) L.
3SB00FBR
Swivel Mount
RBKT4
Dual "L" Bracket
RBKT2
Dual Flange
RFLANG2C
3SR00FRR
"L" Bracket
RBKT1
Smart
LIN3 Horizontal Mount
RSR02ZCR
Cast Aluminum
Flange
RFLANGEA
Side Mirror Mount RBKT5
Lightheads purchased separately
®
Smart
2EJ00ZCR
LINZ6J
2011000AU
LINZ6™
Smart
2FA00ZAR
20C0CDCR
with 2GROMMET
LINZ6R
Super-LED Series
Sub-compact linear with single or split side-by-side color or dual color
modules. Multiple Scan-Lock flash patterns plus steady-burn. Horizontal
mount. Split models can flash each side (3x3) alternately or simultaneously.
Includes black flange, optional deep chrome flange and rubber grommet
mount, horizontal and vertical license plate mounts, trunk mount brackets
and 46° push bumper bracket.
Size: 2” (48mm) H x 1-9/16” (40mm) D x 4” (102mm) L.
®
4” Round
®
20R00XRR
Strobe, LED or TIR6™ Super-LED warning. Back-up, brake/
tail/turn, compartment light models available. LED brake/
tail/turn model exceeds SAE requirements. Super-LED
TIR6 has multiple Scan-Lock flash patterns with Phase 1
and Phase 2 for alternating/simultaneous flashing, for up
to eight lightheads which include steady-burn and synchronize wire. NEW extended lens combination driving /
warning light for2010 Chevy Tahoe and 2011 Ford
Expedition. Options include black or chrome trim rings or
grommet mount kit. Size: 4” (102mm) Dia.
License plate brackets for
LINZ6, TIR3 or LIN3 lightheads,
purchased separately.
RBKT6
RBKT7
Grommet Mount
RGROMMET
PSTANK
2G & 5G
Smart-LED® design features multiple Scan-Lock™ flash patterns
(SignalAlert™ 75 FPM default). Includes vinyl mounting grommet.
Fits all applicable industry standard mounting accessories.
Fully encapsulated electronics. Mounts either horizontal or vertical.
Available with 6” integral wire leads or industry standard connector.
Optional L-Brackets for grommet mount lighthead.
Size with grommet: 5G: 3-3/16” (81mm) H x 7-7/16” (189mm) W.
2G: 5-1/2" (140mm) Dia.
Smart
®
2GBKT1
PSR00XRR
Smart
®
PSA00FAR
PSRASXCR
Strip-Lite™ LED Series
Compact LED warning with multiple flash patterns. Two brake/tail/turn
models one with turn signals and one with two flash patterns including
SignalAlert™. Super-LED compartment lights available in 2 intensity levels.
Strip-Lite Tank Status Light with four color LED groups provides easy to
identify indication of water tank status. Optional brush guard and 45°
angle mounting.
Size: 1” (25mm) H x 1-3/8" (35mm) D x 11-1/2” (292mm) L.
5GA00FAR
HEAVY DUTY
2GA00FAR
®
PROFESSIONAL
industry standard
connector
PSBKT1
5GBKT1
PSBKT451
7
®
surface mount DIRECTIONAL Lightheads
Eliminate need for large cutouts and require only 3/8” access hole for lighthead cabling.
810 Series
508 Series
Surface mount. Available in
linear strobe or dual lamp
halogen warning and
scene-lights with a 8-32°
light spread. Optional
chrome plated trim ring.
Size: 5” (127mm) H x 2”
(51mm) D x 8-11/16”
(221mm) L.
58EC20RU
81EC20RU
Surface mount. Available in linear strobe or
dual lamp halogen warning and scenelight
with a 8-32° light spread. Installed on vehicle with four mounting screws or double
sided tape (customer supplied). Optional
chrome plated trim ring.
Size: 8” (203mm) H x 2” (51mm) D x 10”
(254mm) L.
810CAARR
580CAABR
Interior Lightheads
Illuminate cab, compartments and more.
6" Round
PSCOCDCR
Surface mount. Extremely low profile and intense
illumination with 18 Super-LED diodes. 12 or 24V.
Size: 6” (152mm) Dia. x 5/8"” (16mm) Protusion.
PSCOADCR
0AC0EDCR
60C00VCR
0SC0EDCR
8" Round
70C00VCR
5GC0CCCR
70C00WCR
60C00WCR
20C0CDCR with
optional
2GROMMET
50C00WCR
T0CACCCR
3SRCCDCR
3SC0CDCR
3SR0CDRR
LED Interior/Compartment Lightheads
A wide range of sizes and intensities. Compact Strip-Lite™ SuperLED® with uniform lighting and 600 and 700 Series are available in
two levels of intensity. 4” Round is available with or without Deutsch®
waterproof connectors. 2G and 5G standard with grommet. Optional
chrome and black flanges available for most lightheads. NEW 3"
Round Series is extremely low profile with bright illumination, perfect
for those tight compartment areas with models in red and white andcombination red/white with independent control of colors.
80C0EHCR
9 diode Super-LED® ambulance interior light simulates
natural light at mid-day for
truer flesh tones and accurate
patient evaluation. Also available in 3 and 6 diode models
with red LEDs. Features Hi/
Low intensity mode.
NEW 9 diode combination
light with 6 diodes in Hi mode
and 3 blue/white or red/white
diodes in Low mode.
Direct replacement to
outdated halogen and incandescent lighting fixtures.
Size: 8-1/2” (218mm) Dia.
x 3/4” (19mm) Recess.
80CBEHCR
80CREHCR
CL25C
8635CU
Fluorent 18"
F18C
8635CU
Fluorent™ & Fluorent Plus
8
80R0EJCR
CL25 Series
Surface mounted, two wire design
compartment light. Extends less than 2”
into compartment. Clear or red lens.
Bayonet style 25 watt lamp.
Size: 5-7/8” (149mm) Dia. x 1-7/8”
(48mm) Protrusion.
Fluorent Plus 18"
F18C
Super-LED light tube designed for compartment lighting in increments of 9" to a length of 63". Light tube rotates and locks in
mounting brackets to direct light where it is needed. Fluorent Plus
has twice the number of LEDs than the Flourent Series for brighter illumination. Includes both P and C style mounting clips.
Size: 5/8" (16mm) H x 9" (229mm), 18" (457mm), 27" (686mm),
36" (914mm), 45" (114cm), 54" (137cm), 63" (160cm) L.
80R0EKCR
Dual intensity, interior light with
14 and 35 watt snap-in halogen lamps.
One piece reflector and flange.
Size: 1-5/8” (41mm) Recess x 1-11/64”
(30mm) Protrusion x 6-7/16” (164mm)
W x 8-3/16” (208mm) L.
86CE1
Super-LED one piece reflector and
chrome plated trim flange. Hi/Low
intensity mode.
Size: 8-3/16" (208mm) W x 6-7/16"
(163mm) D x 1-1/4" (32mm) Recess.
86CE1
®
Directional Lightheads
Newly re-designed lighthead series offers a wide variety of mounting configurations
M Series Super-LED® Surface Mount Lightheads
The only patented Linear-LED® lighthead with unique lens shape. Models available
in warning, brake/tail/turn, turn, back-up and scenelights. Surface mount scenelight
features inner optics that directs light downward without angle brackets. Completely
illuminated with no dark spots. Surface mounted via two screws allows for faster
and easier installation. Lighthead is designed with mounting screws outside of
sealed lens/reflector assembly eliminating water infiltration. Solid and split colors
available. Hi/Low is standard. Multiple Scan-Lock™ flash patterns utilizing solid, left/
right, top/bottom, in/out or diagonal sequencing. NEW Steady-burn models available. Hard coated lenses resist scratches, chemical and UV damage. NEW M2
Series in warning with single or split colors. Options include: flanges in black or
chrome; chrome flanges that fit M Series to existing 400, 600, 700 and 900 Series
mounting; 15° angled surface mount housing in chrome or black; vehicle specific
mounting for headlight, grille, and fender; and chrome flanges for two, three and
four lightheads.
M9: 6-1/2” (165mm) H x 1-3/8” (35mm) D x 10-3/8” (263mm) L.
M7: 3-3/8” (86mm) H x 1-3/8” (35mm) D x 7-5/8” (194mm) L.
M6: 4-5/16” (109mm) H x 1-3/8” (35mm) D x 6-3/4” (170mm) L.
M4: 3-3/8” (86mm) H x 1-3/8” (35mm) D x 5-1/2” (138mm) L.
M2: 2-1/2” (64mm) H x 1” (25 mm) D x 4” (102mm) L
(Sizes include flange)
M2B
Smart
®
M4K with optional
M4FC
M9AS (steady burn)
with optional M9FC
M6R with optional
M6FC
M7BC with optional
M7FC
M4R with optional
M4FB
M7D
M6BUW
M6D
M9J
M6T
M9LZC
M7FC700
M4FC400
M9BTTX
M9FC900
M6FC600
Optional flanges adapt M Series lightheads
to older series lighthead mounting holes
(lightheads purchased sprarately)
M6FCV4
M6FCV2
M6FCV3
M9BUW
M6P15C
Optional, 15° angled surface
mount housing,
also available in black.
M9T
Smart
Linear strobe, snap-in halogen,
incandescent brake/tail, surface
mount LED, LED back-up, brake/
tail, scenelights, and compartment lights, LIN6™ and TIR6™
Super-LED. Available in split LED
or solid colors. Strobe and halogen require power supply or
flasher, purchased separately.
LIN6 and TIR6 have multiple
Scan-Lock™ flash patterns.
Optional chrome plated or black
flange; rubber grommet; pedestal/
swivel mount; brush guard;
polished aluminum; L-bracket;
surface mounts, or round bar
mounts in 1” and 1-1/4” versions.
Size: (lens)1-5/8” (41mm) H x 5”
(127mm) L.
500 Series
400 Series
40J000CR
40RB5SCR
40A00AAR
402000RU
Smart
®
40C00VCR
50RV27ZCR
Compact size warning in
linear strobe, snap-in halogen, single or dual level
Super-LED. LED back-up/
interior, amber turn signal
or maximum intensity
brake/tail/turn.
Strobe and halogen require
power supply or flasher,
purchased separately.
All 5 safety colors.
Optional chrome plated or
black flange and swivel
pedestal mount.
Size: 3-1/16” (77mm) H
x 4-15/16” (124mm) L.
50A02ZAR
50A03ZAR
50AR2ZCR
5SA00FAR
50K000AR
502000AU
50R00FRR
40A02ZCR
50R00XRR
40R00XRR
Shown with optional
pedestal housing in
black or chrome
Optional
Chrome
Plated Flange
4EFLANGE
4EGRILB
Optional
Black
Flange
4FLANGEB
®
Optional Mounting Configurations
(Lightheads purchased separately)
5TSMAC
5FLANGEB
5GROMMET
5FLANGEC
5HSGPED
4EGRILP
52SMAB
5BKT1
5BRUSH
5HSGB1
5GBKT1
9
®
Models 600, 700 and 900 are available as warning, primary, secondary and
approved supplemental lighting applications for stop/tail/turn signals, back-up
lights, arrow lights and angled scenelights.
Directional Lightheads
New Linear-LED ® lightheads with Super-LED ® intensity that rivals strobe in intensity.
602000RU
90RC5FCR
60C00VCR
60C00WCR
60J000CR
40A02ZAR
60R00BRR
60R00XRR
60A00TAR
600 Series
Smart
®
Medium size lighthead in
linear strobe, halogen,
surface mount Linear-LED,
split Linear-LED; min &
max LED, back-up/interior
and min & max LED
brake/tail/turn.
Amber arrows in LED and
incandescent utilizing
#1157 bulb; halogen
back-up and scenelight.
Warning lights in all five
safety colors. Optional
chrome or black flange,
universal 15° downward
angle surface mount and
headlight mounting kit.
Size: 4-1/8” (105mm) H x
1-5/8” (41mm) Recess
x 6-1/2” (165mm) L.
60X000TR
700 Series
Smart
70F000RR
70A02SAR
70RC6FCR
®
Mid-size lighthead in linear
strobe, relampable snap-in
halogen, surface mount
Linear-LED, split Linear-LED,
halogen and Super-LED scenelights, min & max LED backup/interior light, LED chevron
arrow and amber
halogen turn arrow, and
min & max brake/tail/turn.
Warning lights in all five
safety colors. Optional chrome
or black flange for surface
mount, or vehicle fender, grille
or side hood mounting.
Size: 3-1/16” (78mm) H x
1-3/4” (44mm) D x 7-1/4”
(184mm) L.
Optional
Chrome Plated
Flange
6EFLANGE
Optional
Black Flange
6FLANGEB
702000BU
70R00BRR
70R00XRR
70A00TAR
70X000TR
70C00VCR
70C00WCR
70J000CR
Optional Chrome
Plated Flange
7EFLANGE
60F000BR
Optional Black Flange
7FLANGEB
7EGRILP
7EGRILB
6EHDLTMK
7CAST1
CAST1L
CAST3
73FKIT
7CAST3
64FKIT
CAST4V
CAST3H
900 Series
Optional
Chrome
Plated Flange
9EFLANGE
90F000RR
90AA5SAR
902000GU
90RA5FCR
Optional
Black Flange
9FLANGEB
90A00TAR
10
90R00XRR
90J000CR
97FKIT
Smart
®
Largest size of lighthead series.
Linear strobe, halogen,
surface mount Linear-LED, split
Linear-LED. LED brake/tail/turn,
LED turn arrows, halogen and LED
back-up/interior lights and halogen
scenelights. Warning lights in all
five safety colors. Optional chrome
plated or black flange.
Size: 7-1/8” (181mm) H x
1-7/8”(48mm) Recess x 9-1/8”
(232mm) L.
®
Lightheads & Systems For special applications
High efficiency optics designed for emergency signalling.
VTX609R
with VTXB
70K000ZR
60K000XR
6SC0ENZR
VTX609B
with VTXC
70C0ELZR
M9LZC
50C000ZR
VTX609R
580CAAZR
VTX609J
90E000ZR
810CA0ZR
Halogen and
9SC0ENZR
Super-LED®
Vertex™ Super-LED Light
M6ZC
Scenelights
Opti-Scenelights feature redesigned optic lenses that fill the lighthead with light
and direct light downward over 8-32° without angle brackets. Super-LED models draw minimal current and are designed for heavy-duty operation, vibration,
moisture and corrosion resistance. Available in 500, 508, 600, 700, 810 and 900
Series models, and NEW surface mount M Series styling.
S660CCCC
S690CCCC
HA238A
S660CCAA
S690CCAA
S660AAAA
S690AAAA
CSP660
CSP690
Self-contained surface mount cornering or taillight
assembly has in-line lamp driver which requires no
external flasher. Optional flange in black or chrome plate
allows it to mount outside the vehicle in any location you
want. No RFI noise emitted for radio interference.
Encapsulated with aluminum base. Multiple Scan-Lock™
flash patterns, includes synchronize feature for alternating and synchronous flashing of multiple lamps. LED
color must match color of lens it is installed behind,
except white. 9' connector cable. Red, blue, amber or
white and split colors. Size: Lamp: 7/8" (22mm) H x
1-1/2" (38mm) Dia. Lamp Driver: 7/16" (11mm) H x
15/16" (23mm) W x 4-3/4" (120mm) L.
HA239C
Hide-A-Way Strobe Systems
Each system includes 4 Hide-A-Way strobe lightheads with 15’ cables,
AMP Mate-N-Lok® connectors and remote strobe power supply
CSP660 six outlet, 60 watt or CSP690 six outlet, 90 watt with 10 ScanLock™ flash patterns. Available with either HA239C, clear (soft plug-in
style) or HA238A, amber (flange style) strobe lightheads.
Universal LED Hideaway™
Hide-A-Way Strobe Tubes
Ideal for marked and unmarked vehicles. Smallest strobe
lamp assembly available. Easy to install in composite style
headlight/taillight assemblies.
HA239C has soft plug-in design with clear bulb.
HA238 has flange style and is available in amber or clear.
Size: 1-5/8” (41mm) H, mounts into 1” (25mm) Dia. cutout.
HA239C
Versatile answer for putting LED power performance in headlight and taillight assemblies. Available in 2 and 4 lamp systems. Multiple Scan-Lock flash patterns. Die-cast aluminum
base, backward compatible to HA238 and standard 1"
Hideaway lights, requires 3/4" hole in any composite style
headlight. Includes fully encapsulated lamp driver and six
position waterproof connectors. Red, amber, blue and white.
Size: 1-7/8" (47mm) H x 1-1/4" (32mm) Dia.
HA238A
Mirror Beam™ Series
0SCOEDCR
0SB00FCR
0SR00FCR
0S Oval Series
0AC0EDCR
Small oval LED lighthead in a chrome housing for
flashing warning, marker/clearance and illumination, 45° bezel step light and 24 volt model.
Available in red, amber, white or blue. Size: 1”
(25mm) H x 1-1/2” (38mm) W x 1/2” (13mm) D.
Bezel model: 1" (25mm) H x 7/8" (21mm) D x
1-7/8" (48mm) L.
Integral mirror mount 500 Series lightheads put warning at mid-level where
you need it most, forward and at critical
intersection angles. Linear-LED® models
can be synchronized for alternating or
simultaneous flashing. Choose from
linear strobe or Super-LED. For Ford
Crown Victoria and Taurus, Chevrolet
Impala, Suburban, Silverado, Tahoe, and
Dodge Charger.
Smart
®
11
®
Lightheads for special applications
HEAVY DUTY
®
PROFESSIONAL
Pioneer Plus
Combination
Floodlight and
8° Spotlight
PCP2
Pioneer
Single Lamp
PFA1
Pioneer Plus
2° Spotlight
PTP1
Pioneer Plus
8° Spotlight
PSP1
Pioneer Plus
Dual Lamp
PFP2
Pioneer™ & NEW Pioneer Plus™ Super-LED®
Floodlights and Spotlights
All the performance and reliability benefits of Whelen's latest LED
technology!
Upgrade outdated halogen or HID lighting. Pioneer Plus has twice the
lumen output of the original Pioneer with usable lumens ranging
from 3,000 to 14,000 depending on the model selected. Floodlights
are available in four intensities with single and dual models. NEW
Models include Spotlights, available in 2° and 8°; and a dual lamp
combination Floodlight/8°Spotlight. Floodlights are available in three
voltages: 12, 24 or 120 VAC which can be connected to a generator
to provide floodlighting away from the vehicle's power source without significant voltage drop. Pioneer Series with solid-state electronics feature instant On/Off eliminating high current ramp up time and
high current in-rush, along with the high cost of lamp or ballast
replacement. A redesigned rugged, all aluminum housing is powder
coated and available in black or white. All Pioneers have Whelen's
five year HDP® Heavy-Duty Professional warranty.
Size: Housing without bracket: 4-1/4" (108mm) H x 2-7/8" (71mm) D
x 8-3/16" (207mm) Single, 14" (356mm) Dual, L.
Mountings available are recessed mount with chrome trim ring
mounts straight out or 15° fixed downward angle; vehicle specific
brow mounting brackets; universal bail bracket adjustable to 25°
upward or downward; pedestal mount bracket (that tilts up/down,
base swivels 360° and includes removable handle); pole mount adapter
fits most industry standard 3/4" NPT poles and includes removable
handle; and lightbar mount designed for Ultra Freedom™ Lightbar.
Recess Mount
PBA103
Bail Bracket
PBA203
PBA206
PBA106
Brow Mount
Pedestal Mount
PBA0130
Pole Mount Adapter
PBAPED
PBAPED2
Lightbar Mount
PFA_ _ _ _
PFA2LB_
W20SSRK
WWL200
WWL100
Whelen Super-LED Work Lights
W20SS
Safety
Site™
The safe, environmentally friendly alternative to flares. Highly effective
encapsulated red LED light modules designed for temporary warning
in a wide range of applications. Can be used horizontally for emergency aircraft landing zone identification or in vertical position. Sold as
single modules or in a kit of 5 modules in a compact Cordura® duffle
bag. Visible to 5-7 miles. Powered by 3 C-size alkaline batteries, not
included.
Size: 5" (125mm) H x 3" (74mm) D x 4-3/4" (122mm) L.
12
Cost effective work lights. Replaces similar outdated HID floodlights.
Surface mount. Instant On/Off, no ramp up time to achieve full intensity. Rugged aluminum housing with gray powder coated finish.
Optional bail bracket mounts are adjustable up to 15°, for maximum
light effectiveness. No ultraviolet light that attracts insects during
night-time operation. Available in single or dual models.
Size: Housing without bracket: 4-1/4" (108mm) H x 2-7/8" (71mm) D
x 8-3/16" (207mm) Single, 14" (356mm) Dual, L.
PBA106SS
PBA206SS
®
Lightheads for special applications
PAR-36 & 46 Series
Super-LED® Work Lights
■ Ultra bright Super-LED with low current draw and long life.
■ Stainless steel bracket and hardware included.
■ Five-year HDP® Heavy-Duty Professional warranty.
PFBM12
P36HHS
P46HHS
P36SLCHG
PFBS12
PFBP12C
Magnetic
Floodlight
Floodlight/Spotlight
Choose from floodlight or spotlight and
pedestal/swivel and stud/swivel models.
Two intensity choices with 6 or 12 diodes
with 0.85 amp or 1.70 amps. Lamps
include 10” wires; contact factory for
custom wire lengths and termination.
Built-in On/Off switch. Die cast housing
with black or chrome rear cover.
12 LED magnetic
mount floodlight with
90# pull magnet, 12’
cord with cigar plug
and On/Off switch,
1.70 amp at 12 VDC.
Black housing.
Hand Held
Spot/Floodlight
Rubber housing hand held, spot/flood combination optic light with 90# pull magnet mount,
8’ coiled cord and cigar plug. PAR-36 is 12/24
VDC dual voltage (.85A@12V, .325A @24V)
and produces 500 Lumens, PAR-46 is 12 VDC
(2.3A) and produces 1800 Lumens. Waterproof
durable On/Off push button switch.
PAR-36 Series
Replacement LEDs
Drop-in replacement for
outdated halogen lamps.
Lightweight, low current
and water resistant. 5 year
HDP warranty.
P36SLC
Rubber Housing
Worklight
Rubber swivel housing
available with or without
lighthead.
PAR-46 Series
Spot/floodlight combination. Non-polarity sensitive. 500 lumens, 12/24
VDC; 0.85 amp @ 12
VDC, 0.425 amp @ 24
VDC.
P46SLC
P46WLC
Designed especially for the Unity®
Spotlight. Reverse polarity protected
heavy-duty black powder coated diecast aluminum heatsink. 30 watts, 12
VDC. 2000 lumens. Emits no EMI.
P46FLC
Power Supplies
Offering the widest range of performance, features and economy in the industry.
■ Flash pattern control.
■ Built-in intelligence. Stable on power-up, immune from false triggering.
■ Auto-ranging power regulation, eliminates flash intensity variations.
ISP Series Power Supplies
HEAVY DUTY
ISP94
®
90 watts, four outlets, 12 vdc.
Outlet Control: 2x2. Size: 2-3/8" (60mm) H x
6-7/8” (173mm) W x 7” (178mm) D.
Weight: 2.5 lbs., (1.13kg)
PROFESSIONAL
ISP188
180 watts, eight outlets, 12 vdc. Outlet
Control: 2x2x4. Size: 2-5/8" (67mm) H x
8-5/8" (219mm) W x 9-1/8" (232mm) D.
Weight: 5 lbs., (2.26kg)
Universal® Series Power Supplies
UPS64LXA
■ Output short circuit protection, RFI suppression, MOSFET electronics.
■ AMECA Certified (most models) to SAE, NFPA, California Title XIII.
■ Five year “HDP” Heavy-Duty Professional warranty for USP and ISP
Series, 2 year on Competitor and Competitor Plus.
■ Scan-Lock pattern control lets you scan though 10
flash patterns and lock in the one you want.
HEAVY DUTY
®
Competitor™ Series
CS240
40 watt output, two outlets, 12/24 vdc.
Size: 1-3/4" (38mm) H x 3" (76mm) W x
6-3/4" (171mm) D. Weight: 1.5 lbs., (.56kg)
Competitor Plus™ Series
CSP660
60 watt output, six outlets, 12/24 vdc.
Outlet Control: 2x4.
PROFESSIONAL
75 watt output, four outlets, 12/24 vdc. Ten
Scan-Lock™ flash patterns and synchronize wire.
Outlet Control: 2x2. Size: 2-1/2" (64mm) H x
5-7/8" (149mm) W x 6-3/4" (171mm) D.
CSP690
90 watt output, six outlets, 12 vdc. Outlet
Control: 2x4. Size: 2-5/8" (67mm) H x
11-5/16" (287mm) W x 8" (203mm) D.
Weight: 2 lbs., (.75kg)
13
®
Halogen & led Flashers
Flashers for headlight and grille light systems
Universal Halogen & LED Flashers
UFM8
High reliability, solid-state, relay driven flashers in compact polycarbonate housings with mounting flanges. Epoxy encapsulated for
moisture resistance. Select switching for positive, negative or bi-polar
(pos/neg) switching headlights. Size (flasher only): 1-1/2” (38mm) H
x 4-3/16” (81mm) W x 3” (76mm) D. Weight: 10 oz. (283gr)
Eight outlet, solid-state Universal® halogen
flasher, 60 watts per outlet. Selective switching
system (2x2x2x2 switching) separately
controls the operation of each pair. 16 flash
patterns plus a Traffic Advisor™ pattern.
Size: 1-3/4” (44mm) H x 5-3/4” (146mm) W x
6-3/4” (170mm) D. Weight: 1 lb., (454gr)
SSFPOS
ULF44
Headlight & Grille Light Flashers
Four outlet, four channel LED flasher, with
multiple Scan-Lock™ flash patterns allowing for
alternate or simultaneous flashing of lightheads. Encapsulated for water resistance and
rugged performance.
Size: 1-5/8" (41mm) H x 2" (50mm) W x 2-3/4"
(70mm) L.
100% solid-state, 2 outlet, 160 watts per outlet,
7 flash patterns, for positive switching headlights.
SSFPOSC6
Same as SSFPOS, except includes mating plug
for 2006-10 Ford Crown Victoria Police
Interceptor package.
SSFPOSI6
Same as SSFPOS, except includes mating plug
for 2006-10 Chevy Impala and 2007-10 Chevy
Tahoe police package.
AFM1660
Two wire design, 16 outlet halogen/LED
flasher; each outlet will operate up to a 65
watt lamp (5 amps); multiple Scan-Lock
flash patterns. Interior use only,
KKK-F certified. Size: 5/8” (15mm) H
(without connectors) x 7-1/4’ (184mm) W
x 3-3/4” (95mm) D.
UHF2150A
4 flash patterns, for positive or negative headlight
switching (not for Chevy Impala).
AFM560
SSF5150D
One wire design, 5 outlet halogen/LED chassis
ground flasher; three outlets will operate up
to four 25 amps each; two outlets will
operate up to 10 amps each. Multiple
Scan-Lock flash patterns. Interior use only,
KKK-F certified.
Size: 5/8” (15mm) H (without connectors) x
7-1/4” (184mm) W x 3-3/4” (95mm) D.
Solid-state positive switching taillight flasher,
5 flash patterns, 2006-10 Ford Crown Victoria
compatible.
UBF5150
2004-2010 Ford Crown Victoria police package
taillight flasher with OEM quick disconnect plugs.
AFL530
Five post ring terminal block, encapsulated
LED flasher. Three outlets will operate
up to 30 amps each; two outlets
will operate up to 5 amps each. Multiple
Scan-Lock flash patterns. KKK-F certified.
Size: 5/8” (15mm) H (without connectors) x
6-1/2” (165mm) W x 2-3/4” (70mm) D.
back-up alarms
Economical, easy to install
Electronic Back-Up Alarms
Rugged alarms are easy to install horizontally or vertically.
All are 12/24 VDC and have glass-filled nylon housings.
Encapsulated solid-state electronics are steam cleanable;
pressure washable.
Alarms meet OSHA, Bureau of Mines, and all State
Regulations. Operating temperature range:
-22° F - 131° F.
WBUA97/107
97dB/107dB.
Size: 2-3/4” (69mm) H x 1-1/2” (38mm) W x
4” (102mm) L.
WBUA112
87-112dB, self-adjusting to maintain 5dB
above ambient noise level.
Size: 4” (101mm) H x 5-1/8” (130mm) W x
2-7/8” (73mm) D.
WBUA112C
112dB, constant output.
Size: 4” (101mm) H x 5-1/8” (130mm) W x 2-7/8” (73mm) D.
14
®
Justice Super-LED Series Lightbars
®
®
Cost-competitive, designed for easy operation, upgrade and serviceability.
The only Patented
Linear-LED Module
On the Market Today
JVRRBB with optional JDHB/JDHR center,
JDCR/JDCB inboard and JHFLASH LR11 take-down options
JVRRBB with JDCAs
All Justice Lightbars Feature
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Twelve inches wide and only 2-1/4” high (without mounting feet).
JVRRBB with optional JALF1
LR11 alley light
Three standard lengths 44”, 50”, 56” plus a 62” Wrecker Bar.
Black polycarbonate base on an extruded aluminum platform for added strength.
Clear outer lens standard with a moisture resistant compression fit gasket. Optional color
lenses available.
Optional CON3™ or LIN6™ lighthead modules for outer sections.
Center section available with optional single LIN6, CON3, or two LTR3 lightheads
(for split color center section).
Corner modules available with 6 or 9 Super-LED diodes per module.
Optional external high intensity flashing LED alley light pod and LR11 warning light in alley position.
Standard passenger side cable, driver side optional.
Service oriented. Change colors, upgrade or service lightbar in the field.
Simply remove six screws for outer dome or four screws for center dome to access any section
of the lightbar.
Replace any lighthead by removing one screw and single connector.
Wrecker Lightbar, standard 62” Competitor™ Series model with rear work lights and brake/tail/turn lights.
Five year HDP® (Heavy-Duty Professional) warranty on LEDs.
Size" 2-1/4 (57mm) H x 12" (304mm) W x 44" (112cm) or 50" (127cm) or 56" (142cm) L.
JC/JE Series
Low Current Switching with
JC Series has 9 Super-LEDs per corner module.
JE Series has 6 Super-LEDs per corner module.
Front, rear and all bar operation control, ScanLock™ flash pattern control and pattern override
feature. Optional LR11 alley lights, LR11 takedowns, both with 15° horizontal adjustment or
flashing take-downs, and optional Traffic Advisor
with control head.
Series
JC
JE
JV
JY
WeCan Standard
Current
-
Yes
Yes
-
Corner
Module
Extended
Standard
Extended
Standard
JV/JY Series
Programmable with
Standard JDC* CON3 light modules with optic
spreading filters.
Optional JDL* Linear6 modules.
Optional JXALF1L external high intensity flashing
LED alley light pod and JDLF** LR11 warning light
in alley position.
Optional JTDLED2 high intensity LED flashing
take-downs/work lights.
JV Series has 9 Super-LEDs per corner module.
JY Series has 6 Super-LEDs per corner module.
WeCan Electronic Control Module (ECM) communicates all lightbar operating functions via a 2 conductor, 20 gauge cable. All functions are programmed
easily by your computer via simple "pick & click, or
drag" screens. Windows® based 2000, XP or later
operating system required. USB input to the ECM
from PC or laptop makes programming easy.
Built-in Traffic Advisor™ control, independent flash
pattern and phase control of each individual lighthead, optional LR11 Super-LED flashing take-downs
and alley lights with 15° horizontal adjustment.
Optional WCC9 WeCan Electronic Control Head
replaces the standard WeCan control module. Hand
held or mounted to the dash or console, the WCC9
controls warning lights, take-downs, alley lights and
Traffic Advisor from a single key pad.
Optional JDHB/JDHR LTR3 modules for center section.
Optional JHALF1 LR11 Super-LED flashing alley light.
Optional JTLS1 LR11 Super-LED flashing take-down.
To help you build your Lightbar,
Whelen’s “WeCad™” build-a-bar program is available on our Website at:
www.whelen.com
Optional WCC9 WeCan electronic control head.
15
®
Liberty™ Super-LED® lightbars
DUO™ Technology Modules
Extreme low profile makes it difficult to detect on the roadways.
All Liberty Lightbars Feature
All the latest technology, and heads up warning in an extreme low profile
lightbar that’s almost undetectable. From the extruded aluminum chassis
on up, every component is designed and field-tested for performance
under just those conditions.
■ An all Linear-LED® lightbar featuring the next generation
of ultra bright, ultra wide-angle Super-LED technology.
■ All Liberty models provide heavy-duty, long life operation
with low current draw.
■ Build your lightbar in any color combination with warning LED
modules in any position you want.
■ Choose the standard extended corner models (SA, SX, SW or SY), or
the extra high intensity corner models (SB, SP, SR or SZ).
■ Choose a four corner model, then add up to 12 Linear-LED directional
modules in pairs, for a total of 16 modules, now or at any time in the future.
■ DUO™ Technology models have the ability to flash different colors in the
same lightbar giving you up to four lightbars in one!
■ Super-LED LR11 take-downs, and alleys with 15° horizontal adjustment.
■ Optional brake/tail/turn lights and Traffic Advisor™ for additional warning.
■ Traffic Advisor available in 5 or 6 Linear-LED modules or DUO
Technology modules for combination Traffic Advisor and warning
capability in a single lighthead.
■ Optional solar panel compensates for parasitic draw from the vehicle's
computer, improves battery efficiency and extends battery life.
■ Photocell option for Hi/Low power.
■ Extruded aluminum chassis provides superb strength and stability.
■ Wider footprint provides stability and weight distribution.
■ All LED modules feature wide-angle design for increased performance.
■ Clear outer lenses are standard, optional color lenses are available.
■ 5 year HDP® (Heavy-Duty Professional) warranty on LEDs.
■ All models exceed SAE requirements.
■ Size: 2-1/2” (64mm) H x 12" (304mm) W x three standard lengths;
43-1/8” (109cm), 48-1/2” (123cm) or 53-7/8” (137cm).
SX, SP, SZ, SY Series,
■ Each Super-LED lighthead is driven by a single all electronic module that provides proper input power and choice of flash patterns.
■ Scan-Lock™ allows you to easily scan through multiple flash patterns and lock in the desired pattern. Every pair of lights can have
its own unique pattern.
■ Low “LC” current operation uses a small diameter external cable
harness for operation with standard, or low current switch controls
or micro switches.
■ SY and SZ Series allow for optional DUO Super-LED inboard, corner or all modules to both the front and/or rear of the lightbar.
Each module contains two sets of different color LEDs, allowing
for true dual color modules without giving up light intensity.
■ Optional five or six LED Traffic Advisor with ultra high intensity
Linear Super-LED modules or, five or six lamp split Traffic Advisor.
■ Pre-wired with 15’ passenger side cable exit, optional driver side
cable exit.
Optional SOLARPWC
solar panel compensates
for parasitic draw.
16
Optional SXTDLED super high
intensity Super-LED flashing
take-down light.
Optional WCC9 WeCan
electronic control head.
shown in amber Traffic Advisor mode
and in red/blue warning mode
The only Patented
Linear-LED Module
On the Market Today
SRRRBB with optional SXTLS1 center take-downs,
SLDRR/SLDBB inboard and SXALF1 LR11 take-down options
SA, SB, SW, SR Series
Programmable with
WeCan® Programmable Series includes an external interface unit,
the WeCan electronic control module (ECM), which communicates
all lightbar operating functions. All functions are programmed by a
PC via simple “pick & click, or drag” screens. Windows® based
2000, XP or later operating system required. USB input to the ECM
from PC or laptop makes programming easy.
■ Small cable allows for easier overall wiring and installation.
■ Up to 18 different programmed warning configurations can be
operated via customer supplied switching to each of the 18
input wires to the ECM (default program pre-installed). Once
programmed, selection of these wires will allow for:
• Complete, independent "On" or "Off" control of each lighthead.
• Flash pattern control of each lighthead.
• Phase control of each lighthead with four phases that allow
for alternating, simultaneous & combo flash patterns.
• Cruise light control with almost unlimited adjustable intensity
levels.
• Independent Hi/Low control is available to any one or more
Super-LED lightheads, excluding the four corner modules
(required for SAE certification).
• Independent sequential (single wire or 2-wire) control of the
traffic arrow functions (left, right, split) does not require a
Traffic Advisor control head.
■ The WCC9 (substituted for the ECM) has 10 pre-pro
grammed lightbar configurations accessible via dip switches,
for use with single color WeCan lightbars only
Duo Technology has different color LEDs in the same module allowing one lightbar to
flash different colors and different flash patterns all in the same lightbar!
Series
WeCan
Low
Current
NEW SA
NEW SB
SR
SW
SY
SZ
SP
SX
Corner
Module
Single
DUO
DUO
Color Corners Inboards
Standard
Yes
-
Extended
Standard
-
Optional SXTLS12
LR11 Super-LED
flashing take-down light.
Yes
Yes
-
Yes
Yes
Extended
-
Standard
Optional SXALF1
LR11 Super-LED
flashing alley light.
DUO
TA
Yes
-
Yes
Yes
-
-
Extended corner modules provide
added coverage to critical angles.
To help you build your Lightbar, Whelen’s “WeCad™” build-a-bar program is available on our Website at: www.whelen.com
®
ultra FREEDOM™ Super-LED® lightbars
The only Patented
Linear-LED Module
On the Market Today
Super-LED technology offered in five versions.
FX2RRBB with optional FXTLS1D dual LR11 center take-downs,
and FLDRR/FLDBB inboard options
FW2RRBB with optional FLTALN6L Traffic Advisor
All Freedom Lightbars Feature
■ All models meet or exceed SAE Class 1 and California Title XIII
requirements.
■ Build your lightbar in any color combination with take-downs and
Super-LED modules in any position you want.
■ Optional Solar Panel compensates for parasitic draw from the vehicle's computer, improves battery efficiency and extends battery life.
■ Clear outer lenses are standard, with optional individual color lenses.
■ Five year HDP® (Heavy-Duty Professional) warranty on LEDs.
■ Standard lengths: 44”, 50”, 55”.
■ Size: 3-3/4” (95mm) H x 12” (304mm) W x 44-3/8” (113cm)
or 49-3/4” (126cm) or 55-1/8” (140cm) L.
Series
FL
FX
FV
FW
FC
WeCan
Low
Current
-
Yes
Yes
-
Corner
Module
Bi-level Control of
Lightheads
Standard
Extended
Standard
Extended
Yes
FL/FX Series,
FL Series has standard corner modules
FX Series has extended corner modules
■ Choose the basic 4 corner linear module lightbar, then add up to
twelve Linear Super-LED modules for a total of sixteen modules.
■ Five or six ultra high intensity Linear Super-LED Traffic Advisor™.
■ Each Super-LED lighthead is driven by an all electronic module
that provides proper input power and choice of flash patterns.
■ Scan-Lock™ allows you to scan through multiple flash patterns
and lock in the desired pattern. Every pair of lights can have its
own unique pattern.
■ Optional single or dual LR11 Super-LED flashing take-downs and
flashing alley lights with 15° horizontal adjustment. See current
price list for complete list of options.
■ NFPA lightbars meet NFPA 1901 Lighting Standards with
standard lengths of 55”, 60” and 72”.
FV/FW Series, Programmable with
FV Series has standard corner modules
FW Series has extended corner modules
WeCan® Programmable Lightbar Series. “FV & FW” are similar to
the FL & FX Series but includes an external interface unit, the WeCan
electronic control module (ECM), communicates all lightbar operating
functions. All functions are programmed with a PC via simple “pick &
click, or drag” screens. Windows® based 2000, XP or later operating
system required. USB input to the ECM from PC or laptop makes programming easy.
■ Choose the “FV” standard 4 corner Linear Super-LED with 400
Series or single or dual LR11 alley light options or “FW” extended
corner module with single or dual LR11 alley light option.
■ Small cable allows for easier overall wiring and lightbar installation.
■ Up to 18 different pre-programmed warning configurations can be
operated via customer-supplied switching to each of the 18 input
wires to the ECM (default program pre-installed). Once the ECM is
programmed, selection of these wires will allow for:
• Complete independent "On" or "Off" control of each lighthead.
• Flash pattern control of each lighthead.
• Phase control of each lighthead, with four phases that allow for
alternating, simultaneous & combo flash patterns.
• Cruise light control with almost unlimited adjustable intensity levels.
• Independent Hi/Low control is available to any one or more
Super-LED lightheads, excluding the four corner modules
(required for SAE certification).
• Independent sequential (single wire or 2-wire) control of the
traffic arrow functions (left, right, split) does not require a Traffic
Advisor control head.
■ The WCC9 (substituted for the ECM) has 10 pre-programmed
lightbar configurations accessible via dip switched located on the
rear of the unit.
FC2RRBB with optional dual FXTLS1 MR11 center take-downs
and FLDJJ inboard options
Ultra Freedom II Series
FC Series, Programmable with
■ The Freedom II "FC" Series has all the great features of the FW
lightbars with extended corner modules plus independent
control of upper and lower levels of each split or solid color
lighthead.
Optional WCC9 WeCan
electronic control head
Freedom FL with FLALY
400 Series alley light option
Optional heavy-duty
adjustable leveling
mounting foot
Freedom FX with FXALF1D
dual LR11 flashing alley
light option
Optional FXTLS1D dual LR11
Super-LED flashing take-downs
To help you build your Lightbar, Whelen’s “WeCad™” build-a-bar program is available on our Website at: www.whelen.com
Optional SOLARPNL solar
panel compensates for
parasitic draw
17
®
EDGE ® 9M Strobe lightbars
User friendly, cost efficient and totally modular construction.
Built on the classic Edge 9000
extruded aluminum I-Beam
chassis, the 9M Series is highly
effective, user friendly and
cost efficient.
9M26 with optional 9MTD2 take-downs,
9ML2RB LED panels and 9MALY halogen alley lights
TAD9M06L Traffic Advisor
9MALY halogen alley lights
9M14 with optional halogen flashers 9MHEAA
Available in four, six, eight, ten or twelve strobe versions, 9M features modular construction
“snap-in/lock-in” components for ease of service and exchange or upgrade. Optional Scan-Lock™
flash pattern control is available, along with a wide choice of Traffic Advisor™ models.
■ Classic Edge proportions with straightforward, modular
construction for changes, upgrades or service.
■ Models include 4, 6, 8, 10, or 12 strobe lightheads plus up to ten
secondary warning, halogen or LED modules.
■ Modular design. All inboard lamp modules and slide-in lenses are
of equal size and can be placed anywhere in the lightbar (except
end caps and end position).
■ End caps with clear lenses and color inner filters allow individual
color selection. Color filters are also available for duplex light
modules.
■ Available with optional Scan-Lock™ flash pattern control that lets
you toggle through ten strobe patterns or five halogen and LED
flash patterns and lock in the one you select. Selected pattern is
stored in non-volatile memory until you decide to change it.
■ Scan-Lock allows each power supply and each flasher board to
be programmed in a different pattern.
■ Select up to 3 power supplies (12 strobes max.) or 2 flasher
boards (8 halogen modules) per lightbar.
■ Each flasher runs up to 4 lightheads and includes steady-burn override for one pair of lights to be used for flashing take-downs, etc.
■ Optional built-in Traffic Advisor in strobe, halogen or LED.
■ Most options are available in kit form, field upgradable by
distributor, installer or user.
■ Pre-wired with passenger side exit, 15’ external cable harness.
Optional driver side cable exit with 25’ power cable available.
■ Includes two (8 gauge) power cables to the battery, and sixteen
low power (22 gauge) function wires for connection to the
customer supplied switch control. These low power function
wires need less than 1/2 amp to operate, allow for simple operational independence of each lightbar control function, and make
wiring a snap!
■ Three standard lengths: 44”, 50” and 55”. Contact factory for
custom lengths.
■ All models meet or exceed SAE Class 1 and California Title XIII.
■ Size: 3-3/4" (95mm) H x 10" (254mm) W x 44-1/8" (112cm),
49-3/4" (126cm) and 55-1/8" (140cm) L.
Outer Edge® LIGHTBAR
Vehicle Specific Super-LED ® Externally Mounted Warning
OE134R8 horizonatal mount
with color order number 0ZP44000
Two independent housings that are custom designed to mount on the outside of
the upper rear window of the 2010-2011
Chevy Tahoe, Yukon and Suburban vehicles. Horizontal version mounts on upper
rear window with eight LINZ6™ lightheads.
NEW Pillar version mounts vertically on
sides of rear window with six LINZ6 lightheads and two Vertex™ lightheads.
Available in amber, blue, white and red
with clear non-fluted lenses. Fully encapsulated for superb moisture and vibration
resistance. There are multiple Scan-Lock
flash patterns for the flash mode, the Traffic
Advisor sequence allows for 4 patterns.
Requires customer supplied switches or
the optional Whelen TADCTL1 Traffic
Advisor control head.
RP13RB pillar mount with color order number RP44000
18
Tahoe shown with both horizontal mount and pillar mount.
®
Since 1992 Whelen has lead the industry with Serial Communication
products for law enforcement. Tens of thousands of these system
components are out on the road working for you already, proving that
reliability and enhanced performance add the extra measure of
safety for the hazards you face every day.
Serial communication lIGHTBARS
Networked vehicle warning systems
Real Time
DIAGNOSTIX™!
LFL Liberty
SCRRBB with optional
SXTLS1 center take-downs,
SLDRR/SLDBB inboard and
SXALF1 LR11 take-down
options
Edge Ultra Freedom
FC2RRBB with optional
FXTLS1D dual LR11 center
take-downs, and FLDRR/FLDBB
inboard options
Serial communications link together the light and siren operations in your
vehicle so that they work together as a total warning system.
Programming is simple, unaffected by loss of power and is secure at the user
level. “Hands-free” operation, provided by the MPC01 controller, allows operation
of the lights and auxiliary equipment by simply pressing one button or tapping
the horn ring. The two-wire network makes it easy to add, upgrade and change modules. Real Time Diagnostix gives you a visual confirmation that all components in the
system are working correctly as designed.
MPC01
MPC02
Edge® Ultra Freedom™ SC
LFL Liberty™ SC
■ Extreme low profile Super-LED lightbar,
only 2-1/2" high.
■ All modular design for long life and low
current draw.
■ Choose the basic four Linear Super-LED
extended corner model, then add up to twelve
Linear-Super LED directional modules, for a
total of sixteen linear LED modules.
■ Optional Super-LED take-down and alley lights.
■ Optional five or six lamp Super-LED Traffic
Advisor™.
■ Pre-wired with 15' passenger side cable exit.
■ Standard sizes: 43", 49" and 54".
■ Exceeds SAE requirements.
®
■ Classic Edge styling with a slightly wider
stance in an all Super-LED design.
■ Choose the extended four corner Linear
Super-LED modules, then add up to twelve
Linear Super-LED modules for a total of
sixteen modules.
■ Optional single or dual LR11 Super-LED
flashing take-downs and alley lights, cruise
light mode for the corner modules.
■ Five or six lamp Super-LED Traffic Advisor.
■ Pre-wired with 15' passenger side cable exit.
■ Standard sizes: 44", 50" and 55".
■ Exceeds SAE requirements.
Serial Communication Lightbars have all the same great features and options as our basic
Liberty and Freedom lightbars.
Systems are sold through Authorized Serial Communications Dealers only.
MPC03
Control Heads
The MPC01 control head has multiple light
and siren operations. LED diagnostic
indicator for slide switch. Siren selection
rotary switch. Built-in Traffic Advisor
capability. Built-in Piezo buzzer.
Two auxiliary inputs for remote switches
or sensors. Two auxiliary outputs to drive
external relays. System Test Function.
Programmed at factory or at point of
installation by Authorized Dealer or Fleet
Manager.
The MPC02 has all the features of the
MPCO1, except it has six On/Off push
button switches, a dedicated Traffic
Advisor and Hi/Low switch and does not
include siren feature.
The MPC03 has all the features of the
MPC01 except the rotary switch has been
replaced with 18 push buttons and 4
position slide switch. Includes Traffic Advisor
display.
The MPC controllers a have non-volatile
memory and will not lose its programming
in the event of battery power loss.
19
®
9M, Justice ®, Freedom ™ & liberty ™ Lightbar OPTIONS
Customize and enhance most lightbar models.
Only Whelen offers the operator exceptional flexibility in warning light
functions and enhancements, allowing you to customize, upgrade and
service your lightbar for added years of superior performance.
(Not all options available on all models)
■ Linear12™ modules
■ LIN6™ modules
■ LR11 Super-LED® take-downs and alley lights with 15°
horizontal adjustment
■ Extra high intensity Super-LED work lights and
flashing take-downs
■ External Super-LED alley lights
■ LTR3™ modules
■ CON3™ modules
■ LED brake/tail/turn lights
■ Duplex take-downs, flashers and alleys
■ LED flashers and duplex LED flashers
■ California steady-burn light
■ LED cruise lights
■ GTT Opticom® Emitter
■ Piercer II™, intersection clearance module
■ Traffic Advisor™ supplemental lighting in full size,
duplex and DUO™ modules
■ Strap mounting kits
■ Custom lengths
■ Lightbar signs
■ Switch controls
■ Solar panel to compensate for parasitic draw
■ Leveling adjustable lightbar mounting foot
Justice JDLJ
Justice JDCB/JDCR
Freedom SOLARPNL
Freedom FLALY
Liberty SXTLS1
Liberty SXTDLED/SXWLLED
WCC9 WeCan control
Justice JXALFRRL
color alley position
and JXALF1L external alley
Freedom FXALF1D
Liberty SPALF1
Freedom with MK7SS4
Liberty SXTLS1D
Justice JTDLED2
9M with PRM1SCC
MKE strap kits
PCCS9NP
Lighting for special applications
Vivid lighting for the Utility or Tow and Recovery professional
JFOBAAAA
Towman’s Justice Lightbars
Standard 62" Competitor Series with LIN6 Super-LED corner modules,
rear Super-LED work lights and LED brake/tail/turn lights. Models available
with CON3 modules. Front, rear and all bar operation control. Optional
Scan-Lock™ flash patterns and override flash pattern feature. Moisture
resistant compression fit gasket. Extruded aluminum platform with
polycarbonate base. Mounts with three adjustable slide bolts.
FLOTAAAA
Towman’s Freedom Lightbars
For the road recovery and towing industry; heavy-duty, long life,
and low current draw. Standard with four corner Linear-LED®
modules, rear facing halogen work lights and LED brake/tail/turn
signals. Add pairs of Linear-LED modules as desired. Control
lighting of front of bar, rear or both. Mounts with three adjustable
slide bolts
SLOTAAAA with optional
SLETAAAA
Towman’s Liberty Lightbars
LED heavy-duty, long life, and low current draw. Four corner LIN6
Super-LED modules, rear facing halogen work lights and LED brake/tail/
turn signals. Optional Super-LED work lights available to make it an all LED
lightbar. Add pairs of Linear-LED modules as desired. Control lighting of
front of bar, rear or both. Mounts with four adjustable sliding brackets.
Custom lengths available.
20
9M320W00
Towman’s Edge
®
9M Series
60” long lightbar includes built-in, rear facing brake/tail/turn
signals and work lights. Available in 4, 6, 8, 10 & 12 strobe
models. Mounts with three adjustable slide bolts. Factory
installed options include: forward facing work lights, alley lights,
halogen flashers, cruise lights, sign panels and illuminated signs
with custom logos, Traffic Advisor and custom lengths.
®
MINI lightbars
Strobe, Halogen and Linear Super-LED®
Mini lightbars are useful for vehicles where space is limited or where, due to the size of the
vehicle, the use of two mini lightbars offers a strategic benefit over the use of a single lightbar.
G7
Magnetic mount
G7MCRB
G1
Permanent mount
G1PR
Guardian™ Series
G2
Magnetic/suction mount
G2VA
Available in halogen and strobe. Mounting options are permanent, magnetic and magnetic/suction. Multi-color configurations available with clear outer domes with inner color filters or inner color domes. Permanent mount models include 6" pigtail, magnetic mount
and magnetic/suction models have 8' straight cord with new cigar plug with On/Off switch and fuse. Cigar plug has a connector so
plug can easily be replaced. Three year warranty on rotators, two year warranty on strobe power supply and six month warranty on
strobe flash tube.
Size: 5-7/8" (150mm) H x 7" (178mm) D x 17-5/16" (440mm) L .
G1: Halogen, diamond mirror, 135 RPM rotators, 540 FPM total. 12 VDC.
G2: Halogen, diamond mirror, 175 RPM rotators, 700 FPM total. 12 VDC.
G7: Strobe, two remote strobe heads, built-in high intensity remote 40 watt output power supply and diamond mirror. 12/24 VDC.
Mini Justice® Super-LED
MJYBBRRM
Magnetic mount
shown with optional
CON3 modules
JDCR/JDCB
Four Linear6™ corner modules, up to four optional inboard
CON3™ modules. Permanent, magnetic and magnetic/suction
mounts. Permanent mount models have 15' cable, magnetic
has 10' cord and cigar plug with On/Off switch and pattern
selection switch. Optional CON3 light modules, LTR3™ module
with LR11 Super-LED take-downs or LR11 Super-LED alley
lights for permanent mount models only.
Size: 2-1/4” (57mm) H x 12” (304mm) W x 23” (584mm) L.
LT2RRBBM
Magnetic Mount
Mini Liberty™ Super-LED
Four Linear Super-LED modules available in
permanent or magnetic mount. All models include 15'
straight cord and cigar plug. Magnetic mount versions
include four 90 lb. pull magnets. Optional halogen takedown or alley lights available on permanent mount model.
Clear outer lenses, optional color outer lenses.
Size: 2-1/2” (64mm) H x 12” (304mm) W x 22” (558mm) L.
FT8RRBBP
Permanent mount
shown with optional
FLDRB
9MMEDGEP
Permanent mount
shown with optional
9MTD2 take-downs
and 9MALY alleys
9M Mini Edge Strobe
®
Four linear strobe model. Compact 28-1/4" size is ideal for
single mounting or in pairs where room does not permit
a full size lightbar. Permanent and magnetic mounting.
Magnetic mount includes four 90 lb. pull magnets, 8' straight
cord and cigar plug. Options include halogen take-downs
and alley lights, front or rear halogen or LED flashers.
Size: 3-3/4” (95mm) H x 10” (254mm) W x 28-1/4” (72cm) L.
Mini Ultra Freedom™ Super-LED
High intensity with only 70% of strobe current draw. Four corner Linear Super-LED modules. Clear outer lens, optional color
lens available. Parts change easily with screwdriver. Permanent
or magnetic mounts available. Magnetic mount versions include
four 90 lb. pull magnets, 8' straight cord and cigar plug. Options
include up to four Linear-LED® modules for permanent or magnetic mount models or two or four halogen lamps for permanent
mount models. Options are take-downs, alleys and front and rear
Linear-LED flashers.
Size: 3-3/4” (95mm) H x 12” (304mm) W x 28-1/4” (717mm) L.
21
®
MINI lightbars
Strobe, Halogen and Linear Super-LED®
R1LPHPS with
R13300
R1LPVCA
R10HDPM
Responder® "LP"
Low Profile Super-LED Series
Low-profile, mini lightbar with six Linear or CON3™ Super-LED
modules provides 360° of high impact warning coverage and is
only 3" in height. Lightbars have a built-in flasher to provide multiple Scan-Lock™ patterns including steady-burn. Available in
either a rugged aluminum or polycarbonate base with a polycarbonate dome that is self-cleaning with advanced inner optics.
Permanent mount includes 6" pigtail. Magnetic, magnetic/suction
or permanent mount. Magnetic and magnetic/suction mount versions include 10' straight cord and cigar plug with LED indicator
On/Off switch and pattern control switch.
Size: polycarbonate base is 2-7/8” (74mm) H and aluminum base is
3-1/4" (83mm) H x 6-1/4” (159mm) W x 17” (431mm) L.
R10HDVA
R10 Responder "HD"
Super-LED Series
Heavy-duty, Class 1, J845 certified mini lightbar
with rugged aluminum base is low current and
rated for 100,000 hours of operation. Includes six
Super-LED dual level modules with built-in
electronic flasher. Available in permanent mount,
magnetic mount and magnetic/suction mount
models. Permanent mount models have multiple
Scan-Lock flash patterns, and includes 6" pigtail.
Magnetic and magnetic/suction mount models has
SignalAlert™ flash pattern and includes 10' straight
cord with LED On indicator, On/Off switch and
pattern control switch.
Size: 5-1/8” (130mm) H x 17-1/4” (438mm) W x
6-5/16” (160mm) D.
R2HDPA
R2HDMA
R6DXPB
Responder "HD"
Halogen Series
Built for heavy-duty applications with rugged aluminum
base plate to withstand shock and vibration. Two rotating
halogen assemblies with 135 RPM motors and three year
warranty on the motor assembly. 92,000 beam candlepower, 50 watt snap-in halogen bulb. Two rotators with
diamond mirror. Magnetic or permanent mount. Permanent
mount includes 6" pigtail. Magnetic mount versions include
10' straight cord and cigar plug. 12 VDC. Optional color filter kit.
Size: 5-1/8” (130mm) H x 17-1/4” (438mm) W x 6-5/16”
(160mm) D.
R6DXMR
Responder "DX" Strobe
Compact size and attention-getting warning light
selections make Responder DX mini lightbars a
popular choice for use on personal vehicles for
emergency response. Two strobes, 1,500,000 peak
candlepower, built-in 40 watt power supply,
polycarbonate base. ActionFlash™ default flash
pattern, (120 FPM / 480 FPM total) diamond mirror,
multiple Scan-Lock flash patterns available. 12/24
VDC. Permanent mount includes 6” pigtail,
magnetic mount includes four 50 lb pull magnets
and 8’ straight cord with cigar plug.
Size: 4-3/4” (120mm) H x 17-1/4” (438mm) W x
6-5/16” (160mm) D.
22
®
Inner edge ® Super-led ® series lightbars
Undercover virtually undetectable warning systems.
You choose the housing to fit your vehicle and the number and color of light modules you need.
Choose three, four, six, or eight Linear Super-LED modules or four, five, eight, ten or twelve
super bright TIR3™, LIN3™ and LIN6™ Super-LED modules mounted in a rugged housing that
fits snugly against the upper front windshield or back window of late model Ford Crown
Victoria, Expedition, Explorer, Taurus, F150/F250/F350, Fusion; Chevy Impala, Caprice,
Suburban, Tahoe, Silverado, Dodge Charger and Durango police vehicles.
■ Full-featured interior lightbar that is virtually undetectable when not in operation.
■ Super-LED take-down lights, available on front units.
■ Super-LEDs are low current, vibration and moisture resistant for reliable
long life operation.
■ Easy installation. Front facing models mount to visor anchor points.
■
■
■
■
■
Rear lower facing uses the existing child-restraint brackets, both without
drilling holes.
Requires customer supplied switches or control head, purchased separately.
Available in four safety colors.
Scan-Lock™ provides multiple flash patterns.
Order by choosing the housing model, and then add LED lighthead colors.
Five-year warranty on LEDs.
I02UFBBB
Forward Facing Series
Models Available
I02UR8
light code
ITP00800
I02URZ
light code
ITP00820
I02UFRSB
I02UFRJB
Rear Facing Series
I02UFR8B
Three Linear-LED® Series
■ Three super bright Linear-LED modules that fits snugly against the upper
front windshield. For Ford Crown Victoria police vehicles only.
■ Four models available: solid color, split center lamp, clear center mount
remote strobe and center MR8 halogen take-downs.
■ Size: 2-3/4" (71mm) H x 7-1/8" (181mm) W x 18" (46cm) L.
IZ _ _ UFZ or
I_ _UFZ
light code
RZP5500
IZ _ _ UF8 or
I_ _UF8
light code
IZP4400
I02UR8L
light code
ITP00800
Rear Facing Upper Series
■ Available in TIR3 or Linear-LED.
■ Choose from four configurations with eight or ten TIR3
Super-LED lamps:
• eight or ten lamp warning light or Traffic Advisor
• eight lamp unit with six lamp Traffic Advisor with two end flashers
• ten lamp unit with eight lamp Traffic Advisor with two end flashers
• ten lamp unit with six lamp Traffic Advisor with two flashers
on either end.
■ Linear-LED models available with eight warning or Traffic Advisor
modules or six lamp Traffic Advisor with two end flashers.
■ Available for Ford Crown Victoria only.
IZ _ _ UF4P or
I_ _UF4P
light code
IZP4000
Low Profile Forward Facing Super-LED Series
■ Meets SAE and California Title XIII specifications.
■ Low profile two piece 3-LED or 6-LED Series. Housings are available
■
■
■
■
as sets with individual driver and passenger side units or as a single
passenger side unit. Each section houses either five lightheads or four
lightheads and one Super-LED flashing take-down.
Additional TIR3, LIN3 and LIN6 lenses are supplied with 3-LED models for
customizing light dispersion.
Models with mirrored shroud on drivers side make it easy to view
traffic lights and overhead signs.
Split version fits late model Ford Crown Victoria, Expedition, Explorer,
Taurus, Fusion, F150/F250/F350; Chevy Impala, Caprice, Suburban, Tahoe,
Silverado, Dodge Charger and Durango police vehicles.
One piece version fits Ford Crown Victoria only.
I02LR8T
light code
ILP11600
I02UR8L
light code
ILP44000
Rear Facing Lower Series
■ Choose from six or eight Linear-LED models for warning
or Traffic Advisor operation or eight lamp unit with six lamp
Traffic Advisor with two end flashers.
■ Available for Ford Crown Victoria, Chevy Impala and Dodge
Charger.
TIR3
LIN3
LIN6
Customize your 3-LED Inner Edge with extra interchangeable lenes supplied with each unit.
The TIR3 lens provides directional light.
The LIN3 and LIN6 has a clear non-fluted lens with proprietary collimator,
for a wider 180° light spread.
Patented see through mirrored shroud on driver side reduces flashback and makes it easy to view
traffic lights and overhead signs.
23
®
Traffic Advisor ™ - led straight®style
Low profile, low amp draw, high intensity LED, and Super-LED .
TIR3™ Super-LED
Variable mounting patterns via slide bolts.
Flashing end lamps available in amber, red and blue.
Size: 1-3/4” (44mm) H x 2-3/16” (60mm) D.
DUO™ Technology
Amber Traffic Advisor mode
and color warning mode
in the same lightbar!
TAM Series, Extreme low profile, black housing.
TAM63 Six lamps, 23-1/4” (59cm).
TAM83 Eight lamps, 30-7/16” (77cm).
TAM83** Eight lamps, two end flashing lamps, 30-7/16” (77cm).
TAM83CV Eight lamps with clearance spacer panel for Ford Crown Victoria’s
Control Heads
For internal or external use. Requires optional switches or
optional TADCTL1 control head.
TADP6 Six LINZ6 lamps, 23-1/4” (59cm).
TADP8 Eight LINZ6 lamps, 30-7/16” (77cm).
TADP8** Eight LINZ6 lamps, two end flashing lamps, 30-7/16” (77cm).
500 Series Linear-LED® & CON3™ Super-LED
Wireless Remote
TAM63/TAD6
TAM83/TAD8
LINZ6™ Super-LED
TAZ Series, Extreme low profile, black housing.
TAZ66 Six Linear-LED lamps, 23-1/4” (59cm).
TAZ68 Eight Linear-LED lamps, 30-7/16” (77cm).
TAZ86** Eight LINZ6 lamps, two flashing end lamps, 30-7/16” (77cm).
TADP Series, LINZ6 Super-LED Dominator Plus™.
TACTRL1A
TACTLD1
TACTRL1A for halogen and TACTLD1 for LED. Hand-held wireless remote controls
all Traffic Advisor functions. Optional TADCTL1 for Dominator TAD models.
third brake light, 43-1/2” (110cm).
TAM83C** Eight lamps with clearance spacer panel for Ford Crown Victoria’s
third brake light, two end flashing lamps, 43-1/2” (110cm).
TAM83RB/TAD8RB
TAM8348 Eight lamps, 48” (122cm).
TAD Series TIR3 Super-LED Dominator™, see page 6 for details.
TAM83CV
For internal or external use. Requires optional switches or
optional TADCTL1 control head.
TAM83C**
TAD6 Six lamps, 23-1/4” (59cm).
TAD8 Eight lamps, 30-7/16” (77cm).
TAM8348
TAD8** Eight lamps, two end flashing lamps, 30-7/16” (77cm).
Size: 1-3/4” (44mm) H x 2-3/16” (60mm) D.
TADCTL1
TAZ66/TADP6
TAZ86/TADP8
Slide bolt
mount
For optional
mounting see
Dominator
section on
page 6
TAZ86RB/TADP8RB
TANF65 / TADF6
Keyhole
Mount
TANF85 / TADF8
TANF85RB
Front loading lightheads. Size: 2-3/8” (60mm) H x 2-3/8” (60mm) D.
Low profile rectangular black housing.
TANF65 Six Linear-LED lamps, 37” (94cm).
TANF85 Eight Linear-LED lamps, 43-1/8” (109cm).
TANF85** Eight Linear-LED lamps, with two flashing end lamps,
43-1/8” (109cm).
TADF6 Eight DUO Linear-LED lamps, 37” (94cm).
TADF8 Eight DUO Linear-LED lamps, 45-1/8” (115cm).
TACF85 Eight CON3 lamps, 43-1/8” (109cm).
TACF85** Eight CON3 lamps, two flashing end lamps, 43-1/8” (109cm).
RFCF85 Wireless remote, eight CON3 lamps, 43-1/8” (109cm).
RFNF85 Wireless remote, eight Linear-LED lamps, 43-1/8” (109cm).
500 Series TIR6™ Super-LED
Size: 2-7/8” (73mm) H x 2-1/4” (57mm) D.
Low profile flat-style black housing.
TAM65 Six lamps, 36” (91cm).
TAM85 Eight lamps, 46-7/8” (119cm).
TAM85** Eight lamps, two flashing end lamps, 46-7/8”(119cm).
Low profile rectangular black housing.
TA4437M Eight lamps in a two-piece housing.
Size each piece: 22-3/4” (58cm).
500 Series 5mm LED
Medium intensity 5-millimeter LED lamps provide highly effective
warning and signaling at a more economical price.
Size: 2-7/8” (73mm) H x 2-1/4” (57mm) D.
Low profile black housing.
TAL65 Six lamp LED, 36” (91cm).
TAL85 Eight lamp LED, 46-7/8” (119cm).
TACF85
TACF85RB
RFCF85
RFNF85
TAM65
TAM85
TAM85RB
Slide bolt
TA4437M
Thru-bolt
end cap
TAL65
TAL85
Slide bolt
Edge® Plus+™ Style 700 Series LED
Size: 3-3/4” (95mm) H x 3-9/16” (90mm) W x 72” (183cm) L.
Higher profile natural aluminum rectangular housing.
TA870L For larger vehicles, the eight lamps are built into a
housing that mounts flush to vehicle with slide bolts.
24
Thru-bolt
end cap
TA870L
®
■ All models include control head.
■ Relampable halogen lightheads.
■ Four operating modes: left, right and split center-out directional sequences and flash.
Traffic Advisor™ - HALOGEN straight style
Swivel
foot
500 Series Halogen
Rectangular extruded aluminum black housing.
Size: 2-7/8” (73mm) H x 4-7/16” (113mm) D.
TA637A Six lamps in a rectangular aluminum housing, 33” (83cm) L.
TA837A Eight lamps in a rectangular aluminum housing, 43-1/4” (110cm) L.
TA637A
TA837A
Slide bolt
Higher profile rectangular natural extruded aluminum housing.
TA870A Eight wide-angle halogen lamps in an
Edge® Plus+™ housing which mounts flush to vehicle
with slide bolts. Custom lengths available.
Size: 3-3/4” (95mm) H x 3-9/16” (90mm) W x 72” (183cm) L.
TA870A
™
Traffic Advisor
- arrow style
®
High profile, Super-LED , LED and Halogen.
■ Meets MUTCD2000 specifications
(When mounted on appropriate backboard).
■ Four operating modes; left, right, split and flash.
■ Eight programmable flash patterns.
■ Removable arrowheads for ease of storage and shipping.
■ All include cable and connectors.
■ 25’ of 16-conductor cable supplied.
■ Extruded aluminum housing with black finish.
Slide bolt
TA125NF
RF125NF
500 Series Linear-LED®
Sleek extruded aluminum black housing with front loading lightheads.
Available with 25' or 50' cable.
TA165NF
RF165NF
TA125NF Twelve lamps, one piece.
Size: 16” (406mm) H x 5-1/4” (133mm) D x 48” (122cm) L.
TA165NF Sixteen lamps, one piece.
Size: 23-1/4” (590mm) H x 5-1/4” (133mm) D x 48” (122 cm) L.
RF125NF Wireless remote control, twelve lamps, one piece.
RF165NF Wireless remote control, sixteen lamps, one piece.
Remote Control
for RF125NF/
RF165NF
TA1252L
500 Series LED
Lower profile extruded aluminum black housing.
TA1652L
TA1252L Twelve (5” x 2”) lamps, one piece.
TA1652L Sixteen (5” x 2”) lamps, one piece.
500 Series Halogen
TA8852H
Lower profile extruded aluminum black housing.
TA8852H Sixteen (5” x 2”) lamps, two sections.
Size each piece: 23-1/4” (590mm) H x 5-1/4” (133mm) D x 27-1/2” (698mm) L.
TA1664H
600 Series LED & Halogen
Higher profile extruded aluminum black housing.
TA1664H Sixteen Halogen (6” x 4”) lamps, one piece.
Size: 36-1/2” (927mm) H x 4” (102mm) D x 5’, 6’, 7’ or 8’ L.
TA1660L Sixteen LED (6” x 4”) lamps in serial communications, one piece.
Uses small diameter wires: 2-C 22 gauge for control and a 2-C 10 gauge power cable.
RF6016L Wireless, Remote Control, change flash patterns on the fly. Includes hand
held remote. Sixteen LED (6” x 4”) lamps, one piece. Uses small diameter 2-C 10
gauge power cable.
TA1660L / RF6016L
Remote Control
for RF6016L
25
®
BUILT-IN Traffic Advisor™ series
For stand alone or supplemental use.
Built-In Traffic Advisors for
Edge® Ultra Freedom™, Liberty™, 9M and
Justice® Lightbars
Five, six or eight lamp models in halogen, strobe, LED and
Super-LED® with full size or duplex lamp modules. Consult
current price list for descriptions and model numbers regarding
specific lightbars.
9M Series offers five or six lamp Traffic Advisor in halogen, LED
or strobe with control head.
LFL Liberty Series offers five or six Linear Super-LED modules available in a 2-wire control or with a control head. Available in solid, split
or DUO™ Traffic Advisor.
SLTALN6
Justice Series offers flexibility with the number of CON3™ lightheads,
varying depending on length of lightbar. WeCan® version is 2-wire
control, no special control head needed. Competitor™ version requires
optional control head.
JTACNTL
TA9MO6S
Ultra Freedom Series offers five or six Linear-LED® full size or duplex
modules available in a 2-wire control. No control head is required.
WSSPA30
FLTALN6L
Siren amplifiers
Hand-held and self-contained models
Gamma2™
Low cost siren that provides a wide range of features and
meets SAE Class A sound requirements when used with most
100 watt speakers and is California Title XIII compliant.
Multiple Scan-Lock™ siren tones. Two On/Off 20 amp auxiliary
rocker switches with LED "On" indicators. Stand-by button
provides hands-free operation/override from horn ring. Tone
button activates Wail tone and may be programmed for other
tones. Manual button generates a variety of tones as preselected by user, up to 3 tones. Horn button generates an
Airhorn tone. Easy to install with standard bail-strap mounting
bracket. Two year warranty.
Size: 2-1/4” (57mm) H x 4-1/4” (109mm) W x 5-3/8”
(137mm) D.
WSSC30/WSSPA30
Combination siren and speaker in a single compact unit. Heavyduty compact 30 watt amplified siren ideal for use on motorcycles,
ATVs, snow mobiles, etc. Hands-Free operation for Wail and Yelp
tones, lets you keep both hands steering while accessing warning
tones. Choose from four modes of operation and ten tones. Rugged
housing plus water-resistant connectors for vibration and moisture
resistance. Mounts with two way "L" bracket. Requires customer
supplied switches. Model WSSPA30 includes Public Address and
plug-in microphone.
Size: 4-5/16” (110mm) H x 5-7/16” (138mm) W x 4-5/8” (118mm) D.
EPSL1
EPSL2S9
Epsilon™
HHS2200
Remote siren with hand-held controller
and user definable functionality!
Now you can easily control all light and
siren functions from this compact handheld controller with built-in microphone.
Moisture-resistant rubberized, backlit
push buttons including progressive
three-position push button lighting control. Microprocessor controlled and
rated for one or two 100 watt speakers.
Hands-free operation. Wail, Yelp,
Piercer, Manual Siren and Airhorn tones
are standard. 37 tones to choose from
including Mechanical Siren tone. 6’
coiled cord microphone cable. 20’ of
interconnect cable included.
Size: Amplifier: 2-1/2” (64mm) H x 8”
(203mm) W x 7” (184mm) D.
Control Head: 5-5/16” (135mm) H x
2-1/4” (57mm) W x 1-1/8” (28mm) D.
26
EPSL2S6
Lowest cost, full function
electronic sirens we offer.
Meets SAE Class A sound requirements when used with most 100
watt speakers. Hands-Free and Public Address operation, nine
Scan-Lock siren tones and horn ring override capability with real
time diagnostics. California Title XIII ready. LED backlighting, PA
volume knob, noise-cancelling microphone, On/Off switch, manual button and 7-position rotary switch. Pre-wired with quick disconnect plug for easy service and prompt replacement.
EPSL1: 100 watt output power.
Size: 2-1/4” (57mm) H x 5-7/8” (149mm) W x 5-3/4” (146mm) D.
EPSL2S6: Two 100 watt amplifier with 6 On/Off toggle switches,
operates up to two 100 watt speakers (replaces EPSL2S4)
Size: 3-1/4” (83mm) H x 6” (151mm) W x 5-5/8” (83mm) D.
EPSL2S9: Two 100 watt amplifier with 4 position slide switch and
6 On/Off toggle switches, operates up to two 100 watt speakers
(replaces EPSL2S7)
Size: 3-1/4” (83mm) H x 6” (151mm) W x 5-5/8” (83mm) D.
®
295 Series Siren amplifiers
A model for every need.
HEAVY DUTY
®
PROFESSIONAL
■ AMECA certified to meet Class A requirements of SAE, KKK1822 and California Title
XIII specifications. (Certifications are based on siren amplifier and speaker combination).
■ Can run one 100 watt or two 100 watt speakers.
■ Hands-Free operation, Real-time Diagnostix™.
■ Adjustable microphone and radio repeat volume controls.
■ Standard features include Manual, Wail, Yelp, Airhorn and Piercer Tones.
■ SI TEST ®, fully diagnostic silent test of amplifier and speaker(s).
■ Adjustable intensity backlighting in soft LED non-glare green.
■ Exclusive five year, HDP ® Heavy-Duty Professional warranty.
295SLSA1
Full function plus radio repeat and PA. Multiple
Scan-Lock™ siren tones. Backward compatible with
295HFSA1. Pre-wired unidirectional microphone.
Size: 2-1/2” 63mm) H x 6” (152mm) W
x 7” (178mm) D. Weight: 4 lbs. 10 oz. (2.1kg)
295SLSC1
Same as above except with plug-in microphone.
295HFS2
Full function siren with flush mount
control head with remote amplifier.
Control head size: 2-7/8” (73mm) H
x 6-1/4” (159mm) W x 2-3/8” (60mm) D.
Weight 1 lb., (.5kg)
Amplifier size: 2-3/8” (60mm) H x 6”
(152mm) W x 7” (178mm) D.
Weight: 3-1/2 lbs., (1.6kg)
295HFS2X Same as 295HFS2 with
dual amplifiers, meets California Title
XIII specs.
295SL100
Competitively priced. Full function siren plus radio
repeat and public address. Operates up to two
100 watt speakers. Includes Hands-Free operation
and Scan-Lock siren tones (patent pending).
Self-contained unit for under-dash mounting.
Hard-wired microphone or removable
microphone models available. 24 month warranty.
Backward compatible to the original 295HF100
and WS2100 Series.
Size: 2-1/2” (64mm) H x 6” (152mm) W x 5-1/2”
(138mm) D. Weight: 3 lbs. 12 oz. (1.7kg).
295SL101
Similar to 295SL100 except includes a removable
microphone and volume control knob.
295HFS3
Full function siren with surface or under-dash mount control head with remote amplifier.
Control head size: 2” (51mm) H x 6” (152mm) W x 2-3/8” (60mm) D. Weight: 4 lbs., (1.8kg)
Amplifier size: 2-3/8” (60mm) H x 6” (152mm) W x 7” (178mm) D. Weight: 3-1/2 lbs., (1.6kg)
295HFS4
Full function siren with nine low current switch controls for lighting functions. Surface or underdash mount control head with remote amplifier. Four position slide switch, five push-on/push-off
switches and one momentary switch. Directly compatible with Edge® 9M, Liberty™ and Freedom™
lightbars with low current switching. Control head size: 3-3/8” (86mm) H x 6” (152mm) W x
2-3/8” (60mm) D. Weight: 1-1/2 lbs., (.7kg) Amplifier size: 2-3/8” (60mm) H x 6” (152mm) W x
7” (178mm) D. Weight: 3-1/2 lbs., (1.6kg)
295HFSA5
Full function siren with nine switch light control and low current switching
with Park Kill, Timed Out Relay and California tones. Size: 3-5/16” (84mm) H x
6” (152mm) W x 8-3/8” (213mm) D. Weight: 4-1/2 lbs., (2kg)
295SLSA6
Electronic siren and lights controller with 9 individually programmable switches. Includes multiple Scan-Lock siren tones and hard-wired microphone.
Meets SAE J1849 and California Title XIII requirements. Size: 3-5/16” (84mm)
H x 6” (152mm) W x 7” (178mm) D. Weight: 4-1/2 lbs., (2kg)
295SLSC6 Same as above except with removable microphone.
295HFSDA
Second 100/200 watt
amplifier and interconnect
kit for dual amplifier
operation for use with
295HFS2, 295HFS3 or
295HFS4 systems.
Amplifier size: 2-3/8"
(60mm) H x 6" (152mm) W
x 7” (178mm) D.
295HFSA7
Economical six function dual remote siren with radio repeat and PA operates two
100 watt speakers. Surface mount control head. Operates in dual or mono modes.
External dip switch selectable modes of operation.
Size control head: 2-1/2” (64mm) H x 6-7/8” (175mm) W x 2-3/4” (70mm) D.
Amplifier size: 2-1/4" (57mm) H x 9-1/8" (232mm) W x 8” (203mm) D.
295HFSC9
Two 100 watt, dual or mono siren, 8 programmable operating profiles, removable microphone, park kill siren
shutdown, radio repeat, mechanical siren and airhorn tones, Title 13 compliant, short circuit protection.
Size: 2-1/4" (57mm) H x 6" (152mm) W x 7” (177mm) D. Weight: 4 lbs., 7 oz.
27
®
Siren amplifiers & AIRHORNS
BETA112R
Economical and water resistant models.
Alpha™ Series
Economical, four tone, 100 watt siren. For applications not requiring
public address or radio repeat. Self-contained and remote amplifier
models. Meets Class A requirements with most 100 watt speakers.
Hands-Free operation. Dip switches on rear of amplifier allow easy setup and configuration to most local requirements without special ordering. Optional switch panels or customer supplied switching may be
used with ALPHA12R.
ALPHA12S Self-contained 12 VDC siren.
Size: 2-1/2" (64mm) H x 6" (152mm) W x 4-5/8" (117mm) D.
Weight: 2 lbs., 4 oz. (1kg).
ALPHA12R Remote 12 VDC siren amplifier. Requires separate
switches, sold separately.
Size: 2-3/8" (60mm) H x 7-1/8" (181mm) W x 4" (102mm) D.
Weight: 2 lbs., 7oz. (1.1kg)
ALPHA1-5
ALPHA12R.
Choose from one to five optional switches for use with
ALPHA12S
ALPHA SWITCHES
ALPHA12R
BETA2
BETA1
Beta™ Series
Economical, four tone, 100 watt remote siren amplifier with radio
repeat and public address. Hands-Free operation. Meets Class A
requirements with most 100 watt speakers. PA override in all functions. Use with compact BETA1 and BETA2 control heads or customer supplied switching, purchased separately. Dip switches on rear of
amplifier allow easy set-up and configuration to most local requirements without special ordering. Optional flush mounting bracket for
BETA2 Series control heads.
BETA112R Remote 12 VDC siren amplifier with PA and radio
repeat.
Size: 2-3/8" (60mm) H x 7-1/8" (181mm) W x 5-1/2" (140mm) D.
Weight: 2 lbs., 7oz. (1.1kg)
BETA1 Control Head with noise canceling microphone. 15' cable.
Requires BETA112R siren amplifier, sold separately.
Size: 2" (51mm) H x 4-1/2" (114mm) W x 2-1/2" (64mm) D. Weight:
1 lb., (.45kg)
BETA2 Fully encapsulated surface mount control head is moisture resistant. Sealed toggle and rotary switches. Removable noise
canceling microphone. 20' cable and connectors. Requires BETA112R
siren amplifier, sold separately.
Size: 1-3/4" (44mm) H x 4-1/4" (108mm) W x 2" (51mm) D. Weight:
1 lb., 4 oz. (.6kg)
WPA Series
Water-resistant siren amplifiers and control heads for motorcycle and marine use. Four tone
siren plus public address and radio repeat. 100 watt output. Hands-Free operation.
WPA Series amplifiers work with WPA Series control heads or customer supplied controls.
Fully encapsulated, control heads feature sealed toggle, rotary and push button switches plus
removable noise canceling microphone.
WPA1
WPA112 Remote 100 watt amplifier, 12 vdc. Weather tight, extruded aluminum housing for
rugged environment. Size: 2-7/8" (73mm) H x 3-1/2" (89mm) W x 7-7/8" (200mm) D.
WPA1 Control head with three position toggle switch enables control for siren only functions
or combined light and siren operation. Includes handlebar mounting bracket, 7-1/2’ cable and
connectors. Requires WPA112 siren amplifier, sold separately.
Size: 1-3/4" (44mm) H x 4-1/4" (108mm) W x 2” (51mm) D.
WPA2 Control head with flush mounting bracket, 20’ cable and connectors.
Requires WPA112 siren amplifier, sold separately.
Size: Cutout: 1-3/4" (44mm) H x 4-1/4" (108mm) W.
Bracket: 2-1/2" (64mm) H x 5-1/4" (133mm) W.
WPA3BM Bail mount control head with waterproof switches and microphone jack for marine
applications. Includes removable microphone and 20’ connection cable. Requires WPA112 siren
amplifier, sold separately.
Size: 1-3/4" (44mm) H x 4-1/4" (108mm) W.
WS321 100 watt, siren for Harley-Davidson® wiring harness. Optional microphone available.
Size: 2-7/8" (73mm) H x 3-1/2" (89mm) W x 7-7-8" (200mm) D.
Power Airhorn™ Models
PAH112
PAP112
28
WPA2
WPA3BM
WPA112
Perfect for volunteer fire personnel, security, escort and undercover vehicles.
Delivers 100 watts of power to a 100 watt siren speaker (purchased separately).
Housing mounts in trunk, under the seat or other remote location.
PAH112 Power Airhorn 100 watt amplifier, 12.8 VDC. Size: 2-1/2" (64mm) H x 5-7/8"
(149mm) W x 6-3/4" (171mm) D. Weight: 2.5 lbs. ( 1.14kg)
PAP112 Power Airhorn Plus™ 100 watt amplifier with microphone, 12.8 VDC.
Size: 2-1/2" (64mm) H x 5-7/8" (149mm) W x 6-3/4" (171mm) D. Weight: 3 lbs. (1.36 kg)
PAPEXT15 Optional 15’ extension cable for PAP112 microphone.
®
Cencom Gold™ Siren SYSTEM
Integrated siren and light control system.
®
CenCom Gold provides the road-tested performance of the original CenCom
and adds the features you've been looking for. Programming is easier than
ever using Windows® XP application program (included), with more flexibility to configure lights, traffic arrows and siren function controls to your specific needs. Configured programs may be extracted, stored and modified for
ease of service and reuse. The single Amplifier/Relay Module (ARM) provides ease of access to fuses and connectors without removing the cover.
The system handles one or two 100-watt speakers. CenCom Gold features
an easily programmable system with a control head that includes a fourposition slide switch (one 40-amp and two 20-amp outputs) and eighteen
backlighted push buttons with bright LED On/Off indicators. Moisture resistant membrane switches provide tactile feedback of activation. Unidirectional
microphone and 20’ power input/output cable with plug-in connector is
standard. A 20’ microphone extension cable is available as an option.
5 year warranty on all components.
GOLD
CCSRN2: Control head and amplifier/relay module with upgraded
switching and programming for more customization and operates Whelen 1
or 2-wire Traffic Advisors™ that do not require external controls.
CCSRNTA2: Control head and amplifier/relay module with upgraded
switching and programming for more customization and for interface with
Traffic Advisors which do require external controls.
Size: Control Head: 3-1/2” (89mm) H x 1-5/16” (33mm) D x 6-7/8” (174mm) L.
Amplifier: 3” (76mm) H x 6-3/4” (171mm) D x 8-1/4” (210mm) L.
Bail bracket mount
Semi-flush mount
cantrol™ Siren SYSTEM
Light and siren system for total vehicle integration and control.
Create unified light and siren warning by incorporating every light and
siren on your cruiser into custom programmed configurations.
Vehicle integration provides added capability to your light and siren package
such as: program and control all the lighting, traffic arrows and siren functions in your vehicle, flash pattern synchronization, canine alarm and temperature monitor control, radar and camera activation, engine idle speed
(RPM), door or trunk opening, window down, gun lock, ignition disable and
much more. Configuration is easy with a Windows® based “drag and drop”
computer program. USB port allows for easy program transfer from your
computer to the amplifier/control module. Choice of three amplifier models
and five control heads. Options include light and temperature sensors in
chrome or black.
Size: Controls 1-3: 3-1/2” (89mm) H x 1-5/16” (33mm) D x 6-7/8” (174mm) L.
Control 4: 2-1/2” (64mm) H x 7/8” (22mm) D x 4-3/16” (106mm) L.
Control 5: 5-5/16” (135mm) H x 1-1/8” (29mm) D x 2-3/16” (56mm) L.
Amplifier: 3-1/8” (79mm) H x 7” (179mm) D x 9-1/2” (241mm) L.
Sold by Authorized
Distributors Only
CANTRL1
CAN1
CANTRL2
MODELS
CAN3: Includes standard amplifier/control module with sixteen 2-1/2 amp
outputs, 3, low current (1/4 amp) outputs, and control head of choice.
CAN2: Same as CAN3, plus Traffic Advisor™ module.
CAN1: Same as CAN2, plus eight programmable 10 amp (pos or neg) outputs, an additional sixteen 2-1/2 amp outputs, three Diagnostix™ indicators,
one for the lightbar, control head and the amplifier/relay module.
CAN2
CANTRL3
CAN3
CANTRL4
CANTRL5
CONTROL HEADS
CANCTL1: Includes 3-position slide switch, eighteen push buttons,
microphone and microphone extension cable.
CANCTL2: Includes 3-position progressive light/siren control, eighteen
push buttons, microphone and microphone extension cable.
CANCTL3: Includes a single master emergency switch, eighteen push
button light/siren controller, microphone and microphone extension cable.
CANCTL4: Includes 3-position slide switch, six push buttons, microphone and microphone extension cable.
CANCTL5: Includes a hand-held combination microphone and controller,
3-position progressive light/siren control, nine push buttons and microphone
extension cable.
29
®
Siren speakers
High efficiency 100 watt RMS siren speakers.
SA40/SA41 LO-PRO™
Howler™
Siren & Speaker System
A secondary add-on to your one 100 watt or two 100 watt siren amplifiers,
Howler provides low frequency tones to penetrate other vehicles, alerting
drivers and pedestrians of your approach. Howler adds a customer programmable 8 to 60 second penetrating burst. Select from 3 frequency
bands and 8 tone durations. Howler is the only low frequency tone siren
that can cancel siren tones by either of two external controls which allows
the operator to stop the siren and receive urgent radio transmission.
Works with most siren amplifiers and any sweeping tone, plus Hi/Low and
electronic mechanical tone. Includes two speakers and your choice of
vehicle brackets.
Size: Speaker without bracket: 7-1/4" (184mm) Dia. x 8-3/8" (213mm) L.
Amplifier: 2-1/4" (54mm) H x 5" (127mm) D x 4-3/4" (120mm) L.
Lo-Pro speaker is designed to mount to the Edge® 9M
Lightbar. Field replaceable driver and diaphragm
assembly. Heavy-duty polycarbonate housing, flat black
finish. 100 watt.
Weight: 11 lbs., (5kg)
SA32C06
UnderPro™ dual speaker for 2006-08 Chevrolet Express
Van. Size: 5-1/2” (139mm) H x 32” (812mm)W x 9-1/2”
(241mm) D. Weight: 18 lbs. (8.18 kg)
SA122FMP Projector™
High-performance cast aluminum, multi-port 100 watt
RMS speaker. Available with mounting flange for flush
mounting on emergency vehicles. Polished finish.
Size with flange: 7-7/16” (189mm) H x 7-7/16” (189mm)
W x 5-3/16” (132mm) D. Weight: 12 lbs., (5.5kg)
SA31I01P/SA31I01D
For under bumper and chassis mounting on International
4300/4400. Driver and passenger side models available.
SA340STS
SA314A, SA314B, SA315P
Projector Series
Narrow, high performance, multi-port 100 watt
speaker provides ease of mounting. Installs to
vehicle’s cross member in minutes. Available
in non-corrosive natural cast aluminum,
black cast aluminum or nylon composite
housing. OSHA 1910.95 compliant.
Exceeds CA Title XIII, Class A and
SAE J1849 requirements.
A wide variety of optional mounting
brackets available.
SA314 Size: 6-3/16” (156mm) H x 6-7/16”
(163mm) W x 3-1/8” (79mm) D.
SA315 Size: 6-1/2” (165mm) H x 6-1/2”
(165mm) W x 2-7/8” (74mm) D.
Compact, round aluminum
speaker horn. Size: 5-5/8”
(143mm) H x 5-5/8” (143mm)
W x 6-13/16” (173mm) D.
SA315P
SA340TS
Plastic rectangular speaker horn.
Size: 5” (127mm) H x 8” (203mm)
W x 7” (178mm) D. Weight: 11
lbs., (5kg)
SA314A
SA314B
SA350M
Project
PROJECT
30
A-Flex®
For underhood speaker applications. Flexible 60”
acoustical tube allows the speaker driver to be
mounted virtually any distance from the horn.
Complete with 100 watt RMS driver
and mounting kit.
100 watt speaker for motorcycle
mounting. Heavy gauge, polished
aluminum horn. Chrome plated,
heavy-duty steel bracket with “U”
clamps for crash bar mounting.
Size: 6-7/8” (175mm) H x 7-5/16”
(186mm) W x 6-7/8” (175mm) D.
®
SWITCHES AND CONTROL centers
A variety of switches and control centers are available to match your application.
■
■
■
■
■
Low profile, extruded aluminum housing, black finish.
Units with slide switches have LED “ON” indicator above slide switch positions and push buttons.
Backlighted legend windows above push-on/push-off and momentary switches.
Legend tabs included.
Adjustable bail brackets.
WCC9 - WeCan® Electronic Control Head
PCC8R - Eight function Power Control Center
Eight position key pad with remote relay box, ideal for DOT, Tow
and Wrecker vehicles. Eight function control center with three 20
amp relays and five 10 amp relays. Not programmable.
Diagnostic feedback for relay confirmation. Push-On/Push-Off or
momentary activation. LED backlighted membrane switches are
designed with a solid rubber overlay for moisture resistance. 12
volt or isolated switching. Ignition control available via dip
switch. 70 amps maximum.
Size: Control head: 2-1/2” (64mm) H x 4-3/16” (106mm) W x 7/8"
(22mm) D.
Size: Relay box: 1-1/4” (32mm) H x 7-1/4" (184mm) W x 4-3/4”
(121mm) D.
For use with Liberty™, Freedom™ and Justice® WeCan lightbars. Hand held or mounted to the dash or console, the WCC9
replaces the standard ECM (Electronic Control Module) and is
easy to program, install and control. This control head controls
warning lights, take-downs, alley lights and Traffic Advisor™
from a single key pad. Control lightbar functions using six
pre-programmed control buttons plus a 3 position slide
switch. 10 pre-programmed popular warning configurations
via four dip switches located on the rear of the controller. No
computer required to program control head. May be used with
existing WeCan lightbars. LED backlighted push buttons,
function labels are included.
Size: 2-1/2” (64mm) H x 7/8" (22mm) D x 4-3/16” (106mm) W.
PCC6W
PCC10W
PCCS9R
High current switch center for lightbars that use standard
switching. Four position slide switch and five push-on/push-off
switches and one momentary switch. Built-in 30 amp relays.
Connects to most rotating or strobe lightbars without the use
of separately mounted relays and relay boxes.
Size: 2” (51mm) H x 6-1/8" (156mm) W x 7-1/4” (184mm) D.
Weight: 1 lb., 12 oz. (794gr).
PCCS9NP
Programmable low current control switch center for use
with Edge® 9M, Freedom, Liberty and other lightbars with
low current switching. Three position slide switch, six
push-on/push-off buttons for secondary lightbar functions.
Size: 2”(51mm) H x 6-1/8” (156mm) W x 3-5/8” (92mm) D.
Weight: 1 lb., 12 oz. (794gr). Replaces PCCS9N and
PCCS9N1.
PCC4W
PCC4W / PCC6W / PCC10W
Compact Design. Rocker style single pole/single throw switches,
rated at 25 amps peak, with active LED indicators that light up to
indicate function in use. Individual spade-type fuses conveniently
located on rear mounted fuse strip. Ignition controlled backlighted legend windows for easy visibility in any light. Backlight circuit can be connected to vehicle dimmer switch to control backlight intensity. 72 commonly used press-on switch function label
legend tabs standard. Black epoxy-finished, steel housing.
Common ground post for ease of installing. 12 VDC.
Size without bail bracket:
PCC4W: 2-1/4” (57mm) H x 3” (76mm) W x 4” (102mm) D.
PCC6W & PCC10W: 2-1/4" (57mm) H x 6" (152mm) W x 3-9/16"
(91mm) D.
PCC4W: Four 25 amp switches.
PCC6W: Six 25 amp switches.
PCC10W: Ten 25 amp switches.
SWITCH PANELS
Switch panels with 1-4
switches of your choice.
Available in SPST, SPDT and DPDT.
Switches have 15 amp contacts.
31
®
Wing Plow LIGHTING system
Bright visible warning for extreme weather.
Smart
WPLOW3AA
®
Wing Plow™ Tip Lighting System
TIR3™ Super-LED® light module warning system.
Provides high visibility in both the snow plow wing
stowed and travel positions. Pairs can be synchronized for alternating or simultaneous flashing. Each
high impact lighthead is fully encapsulated in a cast
aluminum housing and includes 20’ of heavy-duty
TPR cabling with built-in strain relief connections.
mOTORCYCLE systems
Heavy-duty lighting and siren products for motorcycle applications.
2EB00ZCR / 2ER00ZCR
M04ZJ
Look for the icon
throughout this catalog.
It identifies products that have either
been designed specifically for
motorcycle applications, or are
suited for motorcycle use.
32
M4B6L
M04ZJ
M05ZJ2
M05ZJ2
Motorcycle Warning Systems
M1FNDR
Harley-Davidson® motorcycle systems provide maximum protection to the front, rear and
sides of your bike. Warning package includes black touring box, adapter plate to mount to
2009-2010 Harley Police Package, separation plate, 12 VDC receptacle, terminal block with
fuses, one Strip-Lite™ Series LED brake/tail/turn, flasher, six M4 Series dual level SuperLED lightheads in single or dual color LEDs mounted on the touring box. For white boxes,
contact factory.
Options for Motorcycle systems include 4" round extended lens TIR6™ Super-LED lightheads, fender mounting kits for 500 Series TIR6 , LINZ6™, TIR3 and LIN3™ Super-LED
lightheads, motorcycle battery, battery charger with 120 VDC receptacle, sirens, speakers,
and LINZ6 windsheild light array for 2000-2010 Harley-Davidson FLHTPI with full faring,
and 2007-2010 Road King.
®
DOT3 ® legal SUPER-LED® certified lighting systems
■ Amber Super-LED lights certified to SAE specifications; standard LED brake/tail/turn and
LED back-up light modules certified to FMVSS
108 specifications.
■ Systems include 400, 500 or 700 Series rearmounted Linear Super-LED models.
■ Front mounted lightheads are provided with
60’ of heavy-duty oil resistant TPR jacketed
cable.
■ Rear mounted lightheads include your choice
of heavy-duty stainless steel or optional aluminum housings with 30' heavy-duty, oil resistant, TPR jacketed cable with strain relief flextubing and couplings provides added safeguard against the elements.
■ 400 and 700 Series rear housings are 7 gauge
stainless steel, and 500 Series are 11 gauge.
■ All Linear lightheads are grouped (front and
back) to flash simultaneously.
■ Rear lighting provides effective warning light
protection with dump body in both lowered
and raised positions.
■ Systems available in 12 VDC.
■ All lightheads and cables are provided with
Deutsch® waterproof connectors.
■ Options include:
• switch control panel
• branch guard for L31 front lighthead
• TIR3 lighthead on side of 400 and 700
housings for 90° light coverage
• aluminum housings for 400, 500 and 700
series lightheads
• Wing plow lighting, see page 32.
HEAVY DUTY
®
FRONT COMPONENTS
PROFESSIONAL
L31 Class 1 Beacon
Micro 400
Micro Freedom™
REAR COMPONENTS
Top
View
500 Series Angled
400 Series Square
Top
View
Top
View
700 Series Square
with TIR3
side light
with TIR3
side light
DOT3 SYSTEMS
Four
Light
Systems
Systems 401,
501 & 701
2 - Micro Freedoms,
2 - rear lightheads
Systems 405,
505 & 705
2 - Micro 400s,
2 - rear lightheads
Two
Light
Systems
System 103
2 - Micro Freedoms
System 108
2 - Micro 400s
Four
Light
Systems
Systems 406,
506 & 706
2 - L31 beacons,
2 - rear lightheads
Two
Light
System
System 107
2 - L31 beacons
Two
Light
Systems
Systems 404,
504 & 704
2 - rear lightheads
Three
Light
Systems
Systems 402
502 & 702
1 - L31 beacon,
2 - rear lightheads
System 109
2 - SS Micro 400s
Systems 410,
510 & 710
2 - SS Micro 400s,
2 - rear lightheads
Wide angle lightheads give visibility with the dump box in raised and lowered positions.
33
®
A wide range of lighting packages
designed to meet New NFPA 1901
Performance Standards for Aerial,
Pumper and Rescue Apparatus.
These packages identify equipment, that when
used as a system, will meet NFPA 1901
photometric and electrical load requirements.
NFPA 1901 SPECIFICATION LIGHTING PACKAGES
Products shown on this page are used in our NFPA 1901 Specification Lighting Packages.
BEACONS
POWER SUPPLIES AND FLASHERS
B6T &
B6MMRRP
Series
Combination
Tailboard
RB6P SERIES
Rotating
Halogen
ISP94
90 watt,
4 outlet
12 vdc
L31HRFN
Super-LED®
LIGHTHEADS
AFL530
5 Terminal
LED Flasher
ISP188
180 watt, 8 outlet,
12 vdc
ISP74
70 watt,
4 outlet
12 vdc
400 Series
Linear Strobe, Halogen & Super-LED
900 Series
Linear Strobe, Halogen and Super-LED®
®
Smart
Smart
LIN3™
Super-LED
RSR02ZCR
®
®
Smart
AFM1660
16 Outlet
Halogen Flasher
AFM560
5 Outlet Halogen
Flasher
LIN3™ with optional
chrome flange
RSR02ZCR
40J000AR
402000AU
500 Series
TIR6™ & LIN6 Super-LED
90RR5FRR
902000BU
Smart
90F000RR
700 Series
Linear Strobe, Halogen & Super-LED
50R03ZRR
Smart
®
40RR5SCR
LINZ6™
Super-LED
LINZ6R
®
Smart
®
50R02ZRR
LINZ6™ with optional
chrome flange
LINZ6J
M Series Super-LED
shown with optional chrome flanges
810 Series Surface Mount
Linear Strobe & Halogen
®
Smart
702000BU
®
Smart
®
Smart
70A02FAR
70F000RR
M6B
M9R
600 Series
Linear Strobe, Halogen and Super-LED
81EC20RU
Smart
810CAARR
Smart
Smart
®
®
508 Series Surface Mount
Linear Strobe & Dual Halogen
®
M4R
M6R
60F000AR
602000AU
60A02FAR
58EC20RU
Optional Flanges: chrome plated or black
580CAABR
81E & 810 Trim
400
Series
LFL
Liberty™
Micro
MCSLED2A
Edge®
LIGHTBARS
Ultra Freedom™ Micro Edge®
MCFLED2A
508 Series Trim
900
Series
600
Series
700
Series
M6HDLMTK
6EHDLTMK
600 and M6 Series headlight cluster mounting
(lightheads sold separately)
500
Series
Contact us for our "NFPA 1901 Specification Lighting Packages" booklet. This booklet details complete packages and zone packages
meeting NFPA 1901 requirements. Each lighting package includes a “Certificate of Compliance with NFPA 1901.”
FORM# N0909
REVISED 041210
NFPA
1901
EDGE® 9M Strobe Series
(special order, check availability)
EDGE Mini 9M Series
(special order, check availability)
Specification
Lighting
Packages
Designed to Meet
New NFPA 1901
Performance Standards for
Fire & Rescue Vehicles
Ultra Freedom™ LED
Mini Freedom
Liberty™ LED Series
34
ﬁ®
®
ambulance Flashers & Lightbars
CHASSIS MOUNT LIGHTBAR SYSTEMS
Available in a variety of sizes and configurations, chassis mount lightbars are designed for surface mounting.
All chassis mount lightbars feature slide mounting bolts. Custom lengths available.
4500 Build-a-Bar Series
Flush mounted extrusion with or without ICC lights, in lengths starting at
22", can be equipped with your choice of linear or Super-LED® modules,
strobe or halogen lightheads configurations to meet KKK primary lighting
specifications or simple secondary lighting requirements.
To build your lightbar from this wide range of configurations,
see the WeCad Lightbar program on our website.
Size: 4-13/16” (118mm) H x 5-1/4” (133mm) W x
various lengths.
Shown as fully loaded lightbars. Visit our website or contact Whelen on ordering information.
AMBULANCE FLASHERS
AFL530
LED flasher. Five post ring
flasher for LED only. 325/162.5/65/65
watt output with Scan-Lock™ multiflash patterns. KKK-F certified with
five year warranty.
AFM560
Halogen/LED flasher.
One wire design, five outlet chassis
ground flasher using a 5 post
terminal block connection.
650/325/65/65 watt output.
Scan-Lock flash patterns.
KKK-F certified, 5 year
warranty. Interior use only.
AFM1660
Halogen/LED flasher. Two wire design,
16 outlet flasher. 65 watt output, per
outlet. Scan-Lock multi-flash patterns.
KKK-F certified with 5 year warranty.
Interior use only.
Notice:
Dimensions indicated for products are within +/- 1 / 16" (1.58mm) tolerance.
Metric equivalents are rounded to nearest whole number. For special applications requiring more precise measurement, contact factory.
The use of a magnetic or suction mounted beacon on the roof of a vehicle in
motion is not recommended, and is at the sole discretion and risk of the user.
Prior to using any interior light, consult your vehicle’s owner manual to
insure proper use with air bag safety systems.
Whelen Engineering reserves the right to upgrade and improve products
without notice.
For optimum performance and reliability, Whelen strobe power supplies are
designed for use with Whelen flash tubes, strobe lightheads and cables only.
Substitution of any of these components with non-Whelen products voids all
warranties and any applicable certifications.
Whelen Trademarks are the property of Whelen Engineering Company, Inc. and may be used only as set forth in the
Guidelines for Use of Whelen Trademarks available at www.whelen.com. Unauthorized use of Whelen Trademarks for
commercial purposes may constitute trademark infringement and unfair competition in violation of federal and state
laws.
Trademarks
CometFlash, DOT3, Edge, HDP, Inner-Beam, Linear-LED, SI TEST, SmartLED, Super-LED, Universal, Project A-Flex,
Responder, Super Strobe and are registered trademarks of Whelen Engineering Company, Inc.
Alpha, Avenger, Beta, CanCom, CenCom, Competitor, Competitor Plus, CON3, Cross-Link, Diagnostix, Dominator,
Dominator Plus, FlatLighter, Freedom, Guardian, Grille-Master, HD Pro, Inner-Edge, Intelligent, Liberty, Linear, LIN3, LIN4,
LIN6, LINZ6, LTR, Lo-Pro, Mirror-Beam, Opti-Scenelight, Packer, PierceAlert, Piercer II, Projector, Rack-Pod, Raider, RotaBeam, Safety Site, Scan-Lock, SideKick, SlimLighter, Slim-Miser, SolarSentry, Spitfire Plus, SpecTIR, Strip-Lite, Traffic
Advisor, TIR3, TIR6, Towman’s, Track-Pak, Twin Side Beam, Under-Pro, and Wing Plow are trademarks of Whelen
Engineering Company, Inc.
NASCAR® is a registered trademark of The National Association for Stock Car Auto Racing, Inc.
35
At Whelen Engineering our products are truly made in America ….
From concept to parts manufacturing, to inspection and assembly,
to shipping and out the door to you.
Over 1200 American employees in two manufacturing facilities take personal pride
in providing you with life-saving warning and signaling devices.
We’ve been here for over fifty years and we’ll be here tomorrow
to support your future needs and to back up our products in the field.
That’s the way we do business and that’s our promise to you.
© 2010 Whelen Engineering Company, Inc. Printed in U.S.A. • Code #10974K-0810

Catalog AFL11 - Strobes-R-Us

Transcription

Similar documents

PRINT the Sell Sheet PDF

Mac Survey - McCreery Aviation Co., Inc

Omnimount QM100 F Instruction Manual

Series CL-L product information sheet

CYCRA Solution Mount Instructions

SPecificAtionS

Green Series Medical Exam Lights

Emergency Services Equipment

TURN YOUR PANASONIC AG-AF101 or AG-AF100 INTO