The Component Room – Upper - Myrdal Orthopedic Technologies

Transcription

Plaster Bandage
Alginate
Synthetic Bandage
P&O Pipe Vice
Cotton Stockinette
Synthetic Stockinette
Surform Files
THE
COMPONENT
ROOM
UPPER EXTREMITIES
Sanding Screen
Indelible Pencils
Bandage Scissors
Plaster Spatula
Examination Gloves
May 2013
Mixing Sticks
Gait Analysis
Mixing Cups
Elastic Plaster
400 GUN
Surgical Tubing
Silicone Replicator
837 Sargent Avenue
Winnipeg, Manitoba R3E 0C1 Canada
P. 204.475.3799
F. 204.775.2252
T. F. 877.395.0081
myrdalorthopedics.com
Contents
4Hands
14 Sports & Recreation Devices
30 Wrist Components
31Accessories
TRS recommends that training with infant, child and Adults
passive and functioning hands be conducted or supervised by a
registered therapist with experience in upper limb prosthetics.
MOT IS YOUR EXCLUSIVE TRS CANADIAN DISTRIBUTOR
It is recommended to watch the TRS Training CD.
MOT IS YOUR EXCLUSIVE TOUGHWARE PRX CANADIAN
DISTRIBUTOR
2
IMPORTANT: These products have been tested to assure conformance to certain quality control standards. However since the manufacturer has no control over actual
application, no warranty is expressed or implied regarding the results to be obtained from the use thereof. User must determine suitability of these products for the
intended application and assume all risk and liability in connection therewith. All images are for reference only and may not be exactly as illustrated.
Te r m s o f S a l e
PRICES:
RETURNS:
All prices are F.O.B. Myrdal Orthopedic Technologies Inc.
Authorization for return of regular stock items in saleable
location, unless otherwise specified. Taxes are not included
condition must be requested within 2 (Two) days of receipt
in our pricing and will be added to your invoice if applicable.
of order. Freight expense will be the customer’s responsibility
Prices will be provided in country of origin and are subject to
unless MOT Inc. has made an error. Special order items are not
change without notice. Custom devices supplied by Myrdal
returnable unless we have made an error in your specifications.
Orthopedic Technologies Inc. are zero rated for tax purposes if
A copy of our invoice or packing slip must accompany all returns.
being supplied from a physician’s prescription. Applicable taxes
A re-stocking charge of 25% may apply if deemed necessary by
in region delivered are the responsibility of the customer. VISA &
MOT Inc.
Master Cards are accepted.
WARRANTY/REPAIRS:
CLAIMS FOR DAMAGES:
These are usually the responsibility of the delivering carrier.
Custom orthopedic devices fabricated completely (components
Make sure to save shipping cartons and packing materials for
included) by Myrdal Orthopedic Technologies Inc. (MOT Inc.) are
inspection. Please do not return merchandise but notify us
warranted for a period of three months from the delivery date.
(not later than 2 (Two) days from receipt of order), and we will
Articles sent in for non-warranty repair are covered for a period
provide you with all the necessary procedures to make a damage
of two months from the repair date. MOT Inc. will deal with any
claim.
manufacturer’s warranty on products supplied by MOT Inc. Any
unauthorized repairs, deviation from directions or modifications
FOREIGN ACCOUNTS:
will void the manufacturer’s warranty. Please provide all serial
Confirmed irrevocable Letter of Credit, Bank Draft, or payment
numbers, purchase date, and our invoice number when making
in full in advance. All orders will be shipped (only) after foreign
a claim. Note: All orthopedic appliances sold by MOT Inc. are the
checks have cleared the bank.
ultimate responsibility of the person or persons, proprietorship
or corporation that supplies the product to the end user. MOT
Inc. will accept no liable responsibilities for products being
dispensed to the aforementioned end user.
NEW ACCOUNTS:
All orders will be shipped C.O.D. unless credit has been
established. To open an account with us please supply three
trade credit references and the name and address of your
financial institution. You will be notified as to your credit status
as soon as possible.
TERMS:
MINIMUM ORDER:
Our minimum order discretion is Seventy Five dollars. ($ 75.00)
Myrdal Orthopedic Technologies Inc. (MOT Inc.) is pleased
to be able to provide you with quality products for your
prosthetic and orthotic fabrication requirements. Our
products are used on a daily basis in many prosthetic
and orthotic facilities and have proven themselves
internationally.
Please be sure to implement all safety equipment and
procedures when using any of your equipment, failure to
do so may result in a preventable injury.
Net 30 days, 1 1/2 % per month service charge on overdue
accounts will be charged. Please refer to our invoice number
with your payment remittance. Credit Card orders can, at the
discretion of MOT Inc. be subject to a 2% handling charge unless
a credit card purchase is indicated at the time of order. While a
purchase order number is not necessary, their use promotes the
capability of accurate tracking shipments and are preferred.
3
The Component Room – Upper
Hands
Greek Series Infant & Pediatric Hands
Original hand patterns were “hand-scupted” by Bob Radocy,
so in essence the GREEK SERIES are small, flexible sculptures
ALPHA, BETA & GAMMA are all slightly different reflecting the
actual developing anatomy of the child’s hand
Uni-sex styling and the finger nails can be ”polished” for the
young ladies
Alpha
Very realistic finger and hand features, molded into all
Beta
Gamma
surfaces
Elastic, flexible holding capability . . . no cable required
Durable, soft polymer material
Easily cleaned and daily cleaning recommended
Limb Length: All levels of limb absence
Models:
ALPHA R & L
BETA R & L
GAMMA R & L
Left
Right
Left
Right
Left
Right
ALPHA LEFT
ALPHA RIGHT
BETA LEFT
BETA RIGHT
GAMMA LEFT
GAMMA RIGHT
SKU – Med Brown
ALPHA LEFT MB
ALPHA RIGHT MB
BETA LEFT MB
BETA RIGHT MB
GAMMA LEFT MB
GAMMA RIGHT MB
SKU – Dark
ALPHA LEFT DK
ALPHA RIGHT DK
BETA LEFT DK
BETA RIGHT DK
GAMMA LEFT DK
GAMMA RIGHT DK
SKU – Tan
Length:
2.2" (5 cm)
Width:
2.5" (6.4 cm)
2.75" (7 cm)
1.6" (4 cm)
1.76" (4.5 cm)
1.88" (4.8 cm)
Grasp-Opening:
~ 1.5" (3.8 cm)
~ 1.7" (4.3 cm)
~1.8" (4.6 cm)
Base Diameter:
1.3" (3.3 cm)
1.47" (3.7 cm)
1.47" (3.7 cm)
Weight:
1.4 oz (40 g)*
1.6 oz (45 g)*
1.7 oz (48 g)*
Wrist Unit:
TRS Infant Wrist
TRS Child Wrist
TRS Child Wrist
Application:
4 – 12 months
10 – 24 months
20 – 36 months
*Weights include the ½ inch diameter, threaded stud, that is removable.
4
Hands
Infant 2 Hand
L’il E-Z Infant Hand
Passive hand option perfect for crawling and toddling.
A child’s first, functional, anatomically correct, economically
Designed to enhance mobility, balance and bi-lateral
L’il E-Zs have unique, self-energizing grasping mechanical
grasping activities
Smooth cup shaped volar (palmar) surface useful for pulling
Realistic finger and thumb features are permanently molded
Useful for crawling and bilateral control as well as unilateral
manipulation
into the back surface of hand
1/2" diameter threaded stud fits any USA made wrist units
Models:
No Glove required due to soft & flexible molded anatomical
features
Easily cleaned with mild household cleansers
Infant 2 Hand
SKU – Tan
components, molded inside a flexible polymer body
Allows objects to be inserted and resists easy object release.
and pushing objects
SKU – Light Tan
priced prosthetic hand
Models:
Left
Right
INFANT2-L-LT
INFANT2-R-LT
INFANT2-L
INFANT2-R
L’il E-Z Infant Hand
Left
Right
SKU – Tan
EZINL0
EZINR0
SKU – Light Tan
EZINLLT
EZINRLT
EZINLDK
EZINRDK
SKU – Med Brown
INFANT2-L-MB INFANT2-R-MB
SKU – Dark
SKU – Dark
INFANT2-L-DK
Length:
2.6" (6.6 cm)
1.8" (4.6 cm)
INFANT2-R-DK
Length:
2.6" (6.6 cm)
Width:
Width:
2" (5 cm)
Weight:
3 oz (85 g)
Weight:
2 oz (57 g)
Opening:
1 – 1.5" (2.5 – 3.8 cm)
Wrist Diameter:
1.5" (3.8 cm)
Wrist Diameter:
Wrist Circumference:
3.9" (10 cm)
Wrist Units:
Infant Wrist
Wrist Unit:
Limb Length:
All levels of upper limb absence
Application:
6 – 18 months
1.3" (3.3 cm)
4.1" (10.4 cm)
TRS Infant wrist specifically for L’il E-Z
Limb Length:
Trans-radial and trans-humeral
applications
Application:
6 – 24 months
NOTE: Light tan is a few shades lighter than TRS’s “normal” tan
color.
5
Hands
Lite Touch Children’s Biomechanical Hands
High efficiency ADEPT voluntary closing (pull to close) mechanics
Molded anatomical features
1/2" diameter threaded stud fits any USA made wrist units
Accessories include ADEPT Cable Adapter
Sure Lok or Cable Cleat System sold separately
Spectra® Cable Adapters and Spectra® Cable also applicable (not included; order separately)
Models:
MICRO R & L
MEDIUM R & L
LARGE R & L
Left
Right
Left
Right
Left
Right
Left
Right
MTLT0
MTRT0
LTSML0
LTSMR0
LTMDL0
LTMDR0
LTLGL0
LTLGR0
SKU – Med Brown
MTLTMB
MTRTMB
LTSMLMB
LTSMRMB
LTMDLMB
LTMDRMB
LTLGLMB
LTLGRMB
SKU – Dark
MTLTDK
MTRTDK
LTSMLDK
LTSMRDK
LTMDLDK
LTMDRDK
LTLGLDK
LTLGRDK
SKU – Tan
Length:
2.6" (6.6 cm)
3.3" (8.3 cm)
3.6" (9.2 cm)
4.3" (10.8 cm)
Width:
1.9" (4.8 cm)
2.3" (5.7 cm)
2.4" (6 cm)
2.6" (6.6 cm)
Weight:
2.6 oz (74 g)
3.6 oz (101 g)
5.4 oz (153 g)
7.3 oz (207 g)
Wrist Diameter:
1.3" (3.3 cm)
1.5" (3.8 cm)
1.8" (4.4 cm)
1.8" (4.4 cm)
Opening:
1.1" (2.8 cm)
1.6" (4 cm)
1.9" (4.8 cm)
2.2" (5.6 cm)
4" (10.2 cm)
4.7" (12 cm)
5.5" (14 cm)
5.5" (14 cm)
2-3 yrs.
3-5 yrs.
5-9 yrs
9-young adult
Application:
Limb Length
Wrist Units:
6
SMALL R & L
Trans-radial as well as trans-humeral applications.
TRS Infant
TRS Child
Hosmer® CAPP® Small
Nylon
CAPP® Medium Nylon
Hosmer® Medium Round
Hosmer® Wedgegrip
Hosmer® Disconnect
Hosmer® Friction Disconnect
Hands
Lite Touch Adult Hand
Smooth voluntary closing (pull to close) operation.
Molded anatomical details.
1/2" diameter threaded stud fits any USA made wrist units.
Accessories include ADEPT Cable Adapter.
SPECTRA® Cable and cable components also applicable (not included). Order separately.
Note: Light to medium duty only. Not designed to support adult hanging weight due to the flexibility of the fingers. Not applicable to
manual labor.
Models:
Lite Touch Adult Hand
Left
Right
LTADL0
LTADR0
SKU – Med Brown
LTADLMB
LTADRMB
SKU – Dark
LTADLDK
SKU – Tan
LTADRDK
Length:
4.7" (12 cm)
Width:
2.8" (7.1 cm)
Weight:
10 oz (284 g)
Opening:
2.7" (6.9 cm)
Wrist Diameter:
1.8" (4.6 cm)
5.7" (14.4 cm)
Wrist Units:
CAPP® Medium Round, Hosmer® Medium Round, Wedgegrip Disconnect and Friction Disconnect.
Limb Length:
Trans-radial and trans-humeral applications.
Application:
Teenagers to average stature adults.
7
Hands
ADEPT Prehensors
Children wearing Adepts are capable of gripping as hard or harder than with their natural
hands. This allows them to be more competitive with peers, because they can create as little
or as much gripping force as they need for an activity. They can pull themselves up, swing,
climb, ride a bike, assemble models, sew, draw, tie sneakers, lace skates, swing a bat, fish, sail
and much more!
Lightweight.
Voluntary-closing (pull to close) cable operation.
Active muscle use and sensory feedback.
Replaceable thumb sleeve.
Accessories include ADEPT Cable Adapter.
Award winning sculptured shape. (Museum of Modern Art
collection, June 1988)
Materials: Aircraft grade
aluminum or structural polymer
support cores. Durable, high
strength, stain resistant, molded
polyurethane matrix composite
body. Long-life, bronze bearing
system.
MODELS:
ADEPT F3
ADEPT E4
ADEPT C2
ADEPT B1
SKU – Tan
ADF300
ADE400
ADC200
ADB100
SKU – Medium Brown
ADF300MB
ADE400MB
ADC200MB
ADB100MB
SKU – Dark
ADF300DK
ADE400DK
ADC200DK
ADB100DK
Length:
2.7" (6.8 cm)
3.2" (8 cm)
3.7" (8.9 cm)
4.3" (10.8 cm)
Width:
1" (2.5 cm)
1.1" (2.7 cm)
1.1" (2.7 cm)
1.2" (3 cm)
Weight:
1.7 oz (49 g)
2.3 oz (66 g)
3 oz (83 g)
4 oz (114 g)
Wrist Diameter:
1.1" (2.7 cm)
1.2" (3.7 cm)
1.3" (3.3 cm)
1.5" (3.8 cm)
Opening:
1.3" (3.2 cm)
1.6" (4 cm)
2" (5.1 cm)
2.5" (6.3 cm)
1 – 3 yrs
3 – 5 yrs
5 – 9 yrs
9 yrs – young adult
TRS® Infant Wrist
TRS® Infant Wrist
TRS® Child Wrist
Application:
Limb Length:
Wrist Units:
Trans-radial as well as trans-humeral applications.
TRS Child Wrist
CAPP® Round Small
Hosmer® Wedgegrip Oval Med.
Disconnect Oval Med.
TRS® Child Wrist
CAPP® Round Small
Hosmer® Wedgegrip Round Med.
Hosmer® Wedgegrip Oval Med.
Disconnect Round Med.
Disconnect Oval Med.
Friction Disconnect Round Med.
Friction Disconnect Oval Med.
NOTE: Age recommendations vary with stature and maturity. ADEPT B’s have been successfully used by women, who prefer a smaller, lighter
duty alternative to our Grip Prehensors.
8
Hands
Grip Prehensors
Grip Prehensors are high performance hand
replacements and sophisticated tools, capable of a wide
range of prehension from delicate manipulations to
magnum gripping power. Slice a tomato, peel a banana,
hammer, use a wrench, weight lift, shoot a bow and
more!
High strength, reliable construction, low maintenance.
The highest efficiency of any body powered prosthetic
device available.
Range of gripping force can exceed 100 pounds.
Voluntary closing design.
Grip 2
Limb length: Trans-radial and trans-humeral applications.
MATERIALS:
Grip 3
Grip 2s comes standard with titanium side plates or can be
ordered with heat treated stainless steel side plates. (GP
2SSS).
The stainless model has the best “wear” characteristics but
weighs approximately 3 oz more than the standard model.
Grip 3 has titanium side plates, surgical grade stainless steel
structural thumb members and replaceable, polyurethane
gripping surfaces.
Flex Wrist
Partial Hand
Grip1000 and Grip with Flex Wrist are special order items
Models:
Grip 2SS
Grip 2S
Grip 2SPH
Stainless
Titanium
For Partial Hand
GP2SSS
GP2S00
GP2SPH
–
SKU – Tan
–
–
–
STG3RTAN
SKU – Black
–
–
–
STG3RB
–
–
–
STG3RMB
Length:
5.6" (14.1 cm)
5.6" (14.1 cm)
5.6" (14.1 cm)
5.7" (14.5 cm)
Width:
0.6" (1.6 cm)
0.6" (1.6 cm)
0.6" (1.6 cm)
0.6" (1.6 cm)
Wrist diameter:
1.6" (4.1 cm)
1.6" (4.1 cm)
1.6" (4.1 cm)
1.6" (4.1 cm)
Opening:
3" (7.5 cm)
3" (7.5 cm)
3" (7.5 cm)
2.8" (7.1 cm)
Weight:
13.7 oz (390 g)
11 oz (312 g)
11 oz (312 g)
9.8 oz (278 g)
SKU
Wrist Units:
Age:
Grip 3
Hosmer® Wedgegrip, Disconect, Friction Disconnect, FM; Medium or Large; Round or Oval. (
Avoid economy, rubber friction wrists if possible.)
11 – Adult
11 – Adult
11 – Adult
11 – Adult
9
Hands
FREE-FLEX
Strong, flexible, polyurethane elastomer.
Realistic anatomical features molded into back-hand surface.
Smooth, scoop-shaped, volar (palmar) surface.
Free-Flex devices extend, flex and absorb shock under external force then rebound to original shape using stored energy.
Models:
FREE FLEX 4
FREE FLEX 3
FREE FLEX 2
FREE FLEX 1
Left
Right
Left
Right
Left
Right
Left
Right
SKU – Tan
FF4L00
FF4R00
FF3L00
FF300
FF2L00
FF2R00
FF1L00
FF1R00
SKU – Med Brown
FF4LMB
FF4RMB
FF3LMB
FF3MB
FF2LMB
FF2RMB
FF1LMB
FF1RMB
SKU – Dark
FF4LDK
FF4RDK
FF3LDK
FF3DK
FF2LDK
FF2RDK
FF1LDK
FF1RDK
Length:
3.2" (8 cm)
4.2" (10.7 cm)
4.8" (12 cm)
5.5" (14 cm)
Width:
2.1" (5.3 cm)
2.6" (6.6 cm)
2.8" (7 cm)
3.3" (8.4 cm)
Weight:
3 oz (80 g)
5 oz (139 g)
7 oz (195 g)
9 oz (266 g)
Wrist Diameter:
1.5" (3.8 cm)
1.5" (3.8 cm)
1.7" (4.3 cm)
1.7" (4.3 cm)
4.7" (12 cm)
4.7" (12 cm)
5.3" (13.5 cm)
5.3" (13.5 cm)
2 – 6 yrs
6 – 13 yrs
13 yrs – Adult
Adult
Application:
Limb Length
Wrist Units:
All models trans-radial, some trans-humeral (mid- to long), patient/consumer dependent.
TRS Child
CAPP® Round Small
Hosmer® Wedgegrip, Disconnect,
Friction Disconnect, FM;
Medium or Large; Round or Oval
Hosmer® Wedgegrip, Disconnect,
Friction Disconnect, FM;
Medium or Large; Round or Oval
NOTE: Check exact diameter of T. D. and wrist for best match.
10
Hands
PRO CUFF “PROSTHOSIS”
Partial Hand…Wrist Disarticulate…Weak or Injured Hands…Paralyzed Hands
The PRO CUFF is a perfect “Activity Specific” solution for persons with
temporary or permanent hand injury, paralysis, partial hand absence or wrist
disarticulation absence. Lack of gripping dexterity, capability or force can be
augmented by using the PRO CUFF equipped with the appropriate prosthetic
terminal device.
Great for activities like Golf, Kayaking, Swimming, Light weight conditioning,
etc.
Allows for the TD to be positioned in an anatomically correct location adding
little if any length to the arm.
Complete and ready to use in minutes.
Constructed of low temperature (150-180°), easily formable EXOS LAMINATES.
BOA® high performance cable lacing tension and closure technology is “Built
–In”.
One-size fits most users… very adjustable… enlarges easily for entry and exit.
Stainless steel TD disconnect, bracket system with multiple mounting options.
Utilizes most TRS TDs with minimal modification.
Easily modified to be compatible with Texas Assistive Devices® TDs.
Models:
PRO CUFF “PROSTHOSIS”
SKU
Left
Right
PROCUFFL
PROCUFFR
Length:
5.0" (12.7 cm)
Weight with Stainless Bracket:
6.6 oz (187 g)
Weight without Bracket:
3.6 oz (102 g)
DISTAL END Internal Circumference (Adjustable range):
~5.75" - ~8.0" (~14.6 cm - ~20.3 cm)
PROXIMAL END Internal Circumference (Adjustable Range):
~8.0" - ~10.in (~20.3 cm- ~25.4 cm)
11
Hands
V2P (Vari-Pinch Prehensor)
New state of the art body powered,voluntary opening terminal devices.
PROVIDES THE USER WITH:
Adjustable pinch force
Grasp Stability
Improved Dexterity
Ability to self change the elastic band
without tools or removing the TD.
"Cooler look" vs Standard Hook types.
Accepts standard 9/32" ball terminals
Accepts 3/16" ball terminal with connector
plate change out.
Models:
12
Aluminum Alloy
Stainless Steel
Left
Right
Left
Right
SKU – Black
V2P-L-BLK
V2P-R-BRK
V2PSS-L-BLK
V2PSS-R-BRK
SKU – Brown
V2P-L-BRN
V2P-R-BRN
V2PSS-L-BRN
V2PSS-R-BRN
SKU – Tan
V2P-L-TAN
V2P-R-TAN
V2PSS-L-TAN
V2PSS-R-TAN
SKU – Silver
V2P-L-SVR
V2P-R-SVR
V2PSS-L-SVR
V2PSS-R-SVR
Length:
4-7/8" (124 mm)
4-7/8" (124 mm)
Width:
3-1/8" (79 mm)
3-1/8" (79 mm)
Height:
3-1/4" (83 mm)
3-1/4" (83 mm)
Weight:
8 oz (227 g)
13 oz (369 g)
Hands
EMS Grivory
Unaffected by Saltwater or Biological Fluids.
This unit is for day to day activities around the home and yard.
Very tough but gentle on furniture, appliances and interiors.
Also ideal for the Beach, Fishing, Snorkeling and Scuba Diving to name a few.
Models:
Aluminum Alloy
Left
Right
SKU – Black
V2PEMS-L-BLK
V2PEMS-R-BLK
SKU – Brown
V2PEMS-L-BR
V2PEMS-R-BR
Length:
4-7/8" (124 mm)
Width:
3-1/8" (79 mm)
Height:
3-1/4" (83 mm)
Weight:
6 oz (171 g)
Retro Classic Hooks
Traditional hoops digits work securely with heavy equipment and tractor controls
Aggressive gripping surfaces and hook contours perfect for lifting bags and pails or pulling tarps
Cam-Action mechanism increases grip force securing carrying loads
Robust steel spring replaces need for elastic bands
Twister™ feature lets users adjust pinch force
Withstands exposure to water, biological fluids, diesel and many agricultural chemicals
Accepts standard 9/32" ball terminal
Accepts most QD adaptors
Models:
Retro Classic – Standard
Left
Right
Retro Classic – Heavy Duty
Left
Right
SKU – Black
RC-L-BLK
RC-R-BLK
RCHD-L-BLK
RCHD-R-BLK
SKU – Silver
RC-L-SVR
RC-R-SVR
RCHD-L-SVR
RCHD-R-SVR
Length:
5" (127 mm)
5" (127 mm)
Width:
1-3/4" (44 mm)
1-3/4" (44 mm)
Height:
2-7/8" (73 mm)
2-7/8" (73 mm)
Weight:
11.5 oz (327 g)
11.5 oz (327 g)
13
Sports & Recreation Devices
Super Sports
SuperSports are designed to enable two-handed performance in all types of recreational and athletic
activities, especially those in which player contact and collision can occur. Successful application can
be expected in basketball, soccer, football, volleyball, skating, jogging, aerobics, dance,
martial arts . . . and much more. SuperSports have also been used very
successfully by parents in handling infants and playing with children.
Flexible, strong, durable polyurethane elastomers. Stainless steel and
aluminum support cores.
Polymer flexes and extends with external pressure and absorbs
shock.
Anatomically proportioned to a “cupped” hand.
Models:
Super Sports 4
Super Sports 3
Super Sports 2
Super Sports 1
SKU – Tan
SS4000
SS3000
SS2000
SS1000
SS4000MB
SS3000MB
SS2000MB
SS1000MB
SKU – Dark
SS4000DK
SS3000DK
SS2000DK
SS1000DK
Length:
3.3" (8.5 cm)
4.3" (10.8 cm)
4.8" (12 cm)
5.5" (14 cm)
Width:
1.9" (4.8 cm)
2.2" (5.6 cm)
2.6" (6.5 cm)
3" (7.7 cm)
Weight:
3 oz (89 g)
5 oz (139 g)
7 oz (190 g)
12 oz (332 g)
Wrist diameter:
1.2" (3 cm)
1.5" (3.8 cm)
1.7" (4.3 cm)
1.8" (4.6 cm)
Limb Length:
Trans-radial and long trans-humeral limb lengths.
Age:
2–6
Wrist Units:
6 – 13
TRS Child, CAPP® Round Small, Hosmer® Wedgegrip,
Disconnect, Friction Disconnect, FM; Medium or Large;
Round or Oval
13 – Adult
Hosmer® Wedgegrip, Disconnect, Friction
Disconnect, FM; Medium or Large; Round or
Oval
NOTE: Check exact diameter of T. D. and wrist for best match.
SHROOM TUMBLERs
Unique mushroom shaped accessory for floor exercise and tumbling.
Supports weight up to two hundred pounds.
Omni-directional flexibility for cart wheels, flips and hand stands.
Progressively cushions impact and allows for easy “roll-over”.
Proportioned to duplicate the surface area of the palm.
Models:
SKU – Black
SKU – Light Pink
Mini Tumbler
SHROOM
MINISHROOM
–
MINISHROOM-LP
–
MINISHROOM-LB
Diamter:
3.5" (8.9 cm)
2.7" (6.9 cm)
Height:
2" (5 cm)
1.6" (4.1 cm)
Weight:
5.5 oz (156 g)
3 oz (85 g)
SKU – Light Blue
Mounting:
Application:
14
Tumbler
Adult
1/2 inch diameter, threaded stud.
Children 7 – 8 yrs +, all adults. Primarily trans-radial conditions.
Black Iron Master And Trainer
The Black Iron Master (BIM) was especially designed for high performance, heavy
duty and professional level weight lifting and training. The Black Iron Master was
used in national competition at the Arnold Classic® in 2004.
The Black Iron Trainer is for general everyday weight lifting. It is
a lighter weight, lighter duty alternative yet still is capable of
handling the wide range of grip and apparatus handle diameters
that are encountered in modern fitness and exercise facilities.
This device is for serious weight lifters only! The BIM is designed to
mechanically grasp and lock onto handles and bars to provide
unparalleled security and stability for extreme weight, bench
pressing, dumbbell flys, dead lifts, squatting, etc. It is also useful
for adapting to a wide variety of other exercise equipment
available in modern fitness facilities.
Swinging gate clamps the bar between curved rubber saddles. The
gate is manually secured in place with a large wing nut. The BIM has no quick release or other break away features once clamped in
place it stays in place until manually released. Used properly it will not slip or slide on the bar.
Models
MASTER
TRAINER
BIM
BIT
Length:
3.5" (9 cm)
2.6" (6.6 cm)
Width:
2" (5 cm)
2" (5.1 cm)
Weight:
25 oz (709 g)
15.5 oz (440 g)
SKU
Load Rating:
Bar Diameters:
Material:
1650 lbs. (750 kg)
440 lbs. (200 kg)
0.875" (2.2 cm) to 0.5" (3.8 cm)
0.875" (2.2 cm) to 0.5" (3.8 cm)
Forged aluminum, steel hardware, polymer rubber pads.
Color:
Silver-gray, hard anodized finish.
Application:
Right or left. Serious, heavy duty, high performance only.
Right or left. All around weight training and lifting.
15
Golf Pro System
Golf Pro models slip over club shaft and then slide up to jam onto the grip.
Internal plastic sizing rings can be enlarged to custom fit the user's clubs.
Uniform club grips are recommended.
Golf Pros provide for a fluid backswing and downswing with excellent control and are easy to use.
Model:
Golf Pro Right
Golf Pro Left
SKU
GOLFPROR
GOLFPROL
Replaces lower hand on club grip.
Replaces upper hand on club grip.
Length:
6.75" (17 cm)
5" (13 cm)
Weight:
8 oz (227 g)
7.5 oz (213 g)
Description:
Left
Left
Right
Custom Trans Humeral
TRS Eagle Golf TD
The TRS Eagle, introduced in 2009, is another example of our continued research
and development efforts to create all synthetic, energy storing sports and
recreational prostheses that duplicate human biomechanics and achieve or surpass
human performance.
The Eagle stores energy on the backswing that helps improve club head speed at
the bottom of the downswing resulting in improved power and driving distance.
One piece, light-weight, high strength polyurethane construction.
Stores energy on backswing improving power.
Flexible grip channel adapts to a wide variety of grip styles, tapers and sizes.
Slips easily over shaft and pulls up to secure on club grip.
Right or left hand uni-lateral absence. Replaces upper hand on club grip.
Requires minimal second hand assistance to engage Eagle to club grip.
Model:
TRS Eagle Golf TD
SKU
EAGLEGOLF
Overall length:
6.25" (15.9 cm)
Grip Channel Length:
4.75" (12 cm)
Width:
1.5" (3.8 cm)
Height:
3.5" (8.9 cm)
Weight:
6.0 oz (170 gm)
Color:
Stealth Black
Materials:
16
Polyurethane and stainless steel
Tampa Bay Dynamic Recreation Elbow System
The Tampa Bay Dynamic Recreation Elbow completely replaces the majority
of components in a standard trans-humeral prosthesis with a dynamic energy
storing system.
Includes two complete dynamic “elbow”, high performance, coated springs.
Each system offers different dynamic swing performance and control.
Specially designed, adjustable length, distal connectors for customizing arm
length.
Designed with standard, stainless components to rapidly couple with
“disconnect wrists” mounted into custom, short, trans-humeral “sports
prosthesis”.
The dual system provides the user with two unique Dynamic “arms” for various activities like golf, baseball, hockey, etc.
Easily adapts to TRS EAGLE, Golf Pro and AGG golf technologies, as well as the Pinch Hitter and select other TRS TDs.
Complete fabrication and installation instructions.
A secure suspension, custom, short, trans-humeral sports prosthesis is required.
Uni-lateral application, very short to long trans-humeral absences. Short sport prosthesis required.
Model:
Elbow System
DYNAMICARM
SKU
Length (Adjustable/customizable)
8.0" – 18.5" (Not including TD)
Diameter:
1.125 in.
Weight:
14.0 oz (397 gm) - 18.4 oz (520 gm) Maximum at full length of 18.5 in.
Color:
Stealth Black
Mill’s ReBound Pro Basketball Hand
The ReBound Basketball Hand is a unique
prosthetic accessory born from the invention
and efforts of the Mill’s family in Colorado.
It is a versatile, flexible, safe, product for
amputees wishing to use a prosthesis.
The ReBound is constructed of a compliant
polymer which is flexible but very strong. The resilient polymer material and innovative design provide excellent ball handling
capability by simulating hand, wrist and finger-like control action.
Friction discs molded onto the palmer surface of the ReBound
provide additional traction for control.
Model:
Pro Basketball Hand
SKU
REBOUND
Length:
7.5" (19 cm)
Width:
7" (17 cm)
Wrist Diameter:
1.6" (4.1 cm)
5.1" (13. cm)
Weight:
6.5 oz (184 g)
Color:
Tan
17
HP HOOPSTER
The HP HOOPSTER was conceived and designed by elite, bi-lateral, amputee athlete Hector
Picard. TRS refined Hector’s original model, under his guidance, to make it more versatile to
meet the needs of a broader audience.
A stiff but flexible dual surface “hoop”, which captures the circumference of a basketball
perfectly. Dorsal and ventral (palmer) ball control surfaces.
Provides surfaces to dribble and expertly handle the ball on the court surface then
simultaneously flip the ball up for shots.
Built in palmer or volar “heel” to help capture and stabilize the ball for greater accuracy.
High performance, polymer construction, with standard, stainless mounting hardware.
Pre-positionable, lockable, wrist angle mechanism optimizes the terminal device’s wrist “extension”
angle, to suit the user’s specific needs and functional capability
Model:
HP Hoopster
SKU
HOOPSTER
Length:
8.75" (22.2 cm)
Diameter:
7.625" (19.4 cm)
Thickness:
Hoop .75" (1.9 cm) Wrist (Heel) 1.75" (4.4 cm)
Weight:
~ 6.0 oz (170 g)
Material:
High performance polyurethane polymer
Color:
Stealth Black & Satin Stainless
Applications:
Teenager / Adult
Limb Length:
Trans-radial and trans-humeral applications
TRS Pinch Hitter Bat Adapter
The Pinch Hitter was designed for “Little League” age kids or persons with smaller
hand proportions who wish to swing a bat using the function and power of both
arms. The Pinch Hitter HD is powerful enough and strong enough for adults. The
Pinch Hitters are constructed entirely of a high performance, flexible, synthetic
rubber. They will screw into standard prosthetic wrists or disconnect style wrist
adapters.
The Pinch Hitters snap on and off aluminum bat handles for safety and need to be
over-gripped with the second hand for security in swinging the bat. They can be
used on either the right or left hand side but perform best on the leading arm.
The flexible Pinch Hitters not only transfer energy but store and release energy. This
helps to control bat swing, improve swing speed and increase ball hitting distances.
Model:
Pinch Hitter
Pinch Hitter HD
PINCHITTER
PINCHITTERHD
Length:
4.75" (12 cm)
4.75" (12 cm)
Width:
1.5" (3.8 cm)
1.5" (3.8 cm)
Weight:
3.5 oz (98 g)
3.5 oz (98 g)
Material:
Proprietary flexible polymer rubber.
Proprietary flexible polymer rubber.
Matte black
Matte black
Kids and young adults.
Right or left absence or partial hand.
HD Adults and aggressive use.
Right or left absence or partial hand.
SKU
Color:
Applications:
18
Grand Slam Baseball/Softball Bat TD’s
Grand Slam TDs provide for powerful, smooth, two-handed swings. Releases bat
easily. Baseball and softball.
They require a sound hand to ensure positive grip and stability.
Grand Slams slip onto all aluminum and other bats with one inch diameter
handles creating proper hand placement.
Stainless steel tube construction.
High performance flexible coupling with braided steel reinforcing duplicates
anatomical “wrist break.” Grand Slams remain on the prosthesis and will not
damage the bat.
Model:
Right
Left
GRANDSLAM - R
GRANDSLAM - L
Right for right hand absence assuming right hand swing
Left for left hand absence, assuming left hand swing.
Length:
5" (13 cm)
5" (13 cm)
Weight:
9 oz (225 g)
9 oz (225 g)
Satin finish/black accents
Satin finish/black accents
Teenagers and adults.
Teenagers and adults.
SKU
Description:
Color:
Applications:
Limb Length:
Primarily designed for unilateral, trans-radial hand absence. Certain applications for long trans-humeral.
Wrist Units:
Any wrist which accepts a standard 1/2" diameter threaded fitting.
HI-Fly Fielders
Flexible mesh pocket allows for catching either forehanded or backhanded,
eliminating the need for forearm rotation.
Hi-fly Fielder pocket will handle both baseballs and softballs.
Hi-Fly Jr. pocket will handle baseballs only.
Rotates with adjustable friction to accommodate varying field situations.
Padded leading edge.
Lightweight and strong.
Models:
Hi-Fly Fielder
Hi-Fly JR.
HIFLYFEILDER
HIFLYFEILDERJR
12.75" (32 cm)
10.3" (26 cm)
7.5" (19 cm)
6.3" (16 cm)
Thickness:
1.8" (4.5 cm)
1.8" (4.5 cm)
Weight:
11 oz (314 g)
7 oz (204 g)
Color:
Black w/black trim
Blue or red w/ black trim
Age:
Youth/Adult
Child (T-Ball)
SKU
Length:
Width (max.):
Materials:
Structural nylon, rubber, stainless steel, braided mesh.
19
Power Swing Ring
Accessory which is included with either Hi-Fly model
1.3" I.D. metal ring with 0.875" long lag screw.
Installs easily into the end of a wooden bat; accommodates any style prehensor
finger or thumb.
Duplicates “wrist break-over” for powerful bat swings and control using both arms.
Cross handed grips are also possible.
SKU
Description
UOM
PSR 100
Power Swing Ring
Each
Ski 2
The Ski Device can be used passively without a cable or with a cable for quick,
precision pole plants.
Especially useful for Nordic skiing where upper body power is required for
propulsion and in alpine mogul skiing.
Recreational skiers will find the device very helpful for maintaining general
balance and body posture, which are important for safe and proper ski
control.
Accepts 3/16" dia. and 9/32" dia. cable ball fittings.
Quick disconnect pole system. Adapts to poles from 0.60" to 0.75" diameter.
Shock absorbing flexion mount, TRS provides alternate flexion mount in
accessory pack.
Nordic (cross-country) and alpine (downhill) techniques.
For patient’s skiing ability level, two types of shock absorbing flex mounts are
available.
Model:
SKI 2 TD
SKU
SKI2TD
Length:
3.3" (8.4 cm)
Width:
1.5" (3.8 cm)
Weight:
10.5 oz (298 g)
Material:
Aluminum, stainless steel, rubber, plastic.
Applications:
20
Youth through Adult.
TRS “Power Play” Hockey TD
The Power Play is a high performance prosthetic device for playing ice hockey. The
Power Play is designed to securely, slide-fit down over the last five inches of the
hockey stick for “top of the stick” handling control.
The safe, all polymer construction is available in two stiffness models.
85 standard, most popular. 95 special order, special applications.
The Power Play provides for quick, agile stick and puck control and powerful shots. The
energy storing design performs much like the human forearm and wrist. The Power
Play flexes and rebounds for shots and will bend away under load to prevent injury
during a fall or while being “checked into” the boards.
The Power Play can easily be modified to provide the exact level of flexibility and
power that the individual player demands making it extremely versatile.
Model:
Powerplay Hockey TD
SKU 85 Durometer
POWERPLAY85
SKU 95 Durometer
POWERPLAY95
Overall length:
9" (23 cm)
Effective length:
4" (10 cm) Length it adds to prosthesis before stick attachment.
Weight:
11.5 oz (326 g)
Color:
Black
Applications:
Trans-radial and long trans-humeral
Fittings:
U S Standard 1/2 inch diameter threaded mounting stud.
Slap Shot Hockey TD
The Slap Shot Hockey prosthetic devices offer versatility in handedness and
style of play
One model will be preferred over the other based upon the player’s hand
dominance and stick handling style.
Request either the ES End Stick (donut) or SS Shaft Stick (clip-on) model.
Models:
SKU
Slap Shot End Stick
Slap Shot Shaft Stick
HOCKEYD
HOCKEYC
Length:
5.3" (13 cm)
Weight:
8 oz (227 g)
Color:
Black
Materials:
Polyurethane, stainless steel, aluminum, rubber.
Applications:
8 yrs. – Adult.
Limb length:
Trans-radial, mid to long trans-humeral.
21
Hammerhead Kayaking
Improved design provides more natural “wrist action.”
Energy storing, wrap around, flexible strap coupling:
Positively and safely secures paddle handle.
Releases manually and quickly.
Duplicates the bio-mechanical wrist action required for performance kayaking.
Aggressive, non-marring, friction surfaces for high torque paddle control.
Mounts on any standard prosthesis or accepts any USA Standard disconnect
adapter.
Strong and reliable!
Synthetic polymer construction with stainless hardware.
Other Applications: Canoeing and rowing water sports applications possible with handle
modifications.
Model:
Hammerhead Kayaking
KAYAK
SKU
Length:
4.3" (11 cm)
Width:
2.7" (7 cm)
Weight:
12 oz (340 g)
Color:
Black
Lamprey Gun Turret
Designed to fit most sporting firearms including bolt action, lever action and
semi-automatic rifles and carbines, over and under, side by side, pump and
semi-automatic style shotguns as well as military M-16’s and their variations.
Flexible polymer “yoke” conforms securely to various stock surfaces without
marring the gun. Yoke snaps onto forearm (fore-end) of stock and can ‑be
pulled back tightening up for precise control. Yoke does not interfere with
aiming or barrel’s sight window.
Lockable ball and socket allows for firing from a variety of positions and a
pivoting platform provides for smooth gun rotation.
Perfect for target and competitive bench shooting, “trap” and sporting clays,
small and big game hunting and upland game pursuits.
Equipped with standard 1/2" diameter threaded prosthetic mounting stud.
Model:
Lamprey Gun Turret
LAMPREY
SKU
Materials:
22
Stainless steel, aluminum
and polyurethane polymer
construction
Weight:
15.5 oz (440 g)
Color:
Black and satin
Criterium Bicycle Handlebar Adapters
All models except Pivot available in either of two hardness 70 & 85
All models snap/pull ON and OFF 1” diameter bicycle handlebars
Criterium is the original, simplest version…. easy on and off.
Wedge version allows for more angulation on the handlebars yet is still
simple one piece polymer construction.
Pivot version is two piece allowing for much greater angulation and arm
torque with adjustable friction pivot mechanism… higher performance and more difficult to release from the bars.
70 references the hardness or “Durometer” of the material. The 70 model is softer, more flexible and forgiving than the 85
model.
Handlebars can be taped with various materials to change the friction and force required to engage and disengage the Criteriums.
All models fit right or left and equipped with ½ inch diameter threaded stainless steel coupler.
Offset centerline duplicates normal palm grasping position for improved biomechanics.
70 Durometer Material – Children/adolescents and smaller proportioned adults and less aggressive riders will prefer the 70 models.
Release loads approximately 15-20 pounds.*
85 Durometer Material – Average to larger adults or more aggressive riders. Requires more effort to engage and disengage from the
handlebars. Release loads approximately 40-45 pounds.*
Release loads were measured using the standard Criterium and one inch diameter smooth, bare metal handlebars without any tape
covering. The load applied was a straight pulling force. No torque was applied. Tape, foam or fabric coverings will increase the amount
of force and torque required to snap on or off the handlebars.
Models:
Criterium
Criterium Wedge
SKU – 70 Durometer
CRITERIUM 70
CRITERIUM 70 WEDGE
SKU – 85 Durometer
Criterium Pivot
CRITERIUM 85
CRITERIUM 85 WEDGE
CRITERIUM PIVOT
Length:
3.375" (8.6 cm)
3.2" (8.1 cm)
4.0" (10.2 cm)
Width:
2.5" (6.4 cm)
2.4" (6.1 cm)
2.5" (6.4 cm)
Weight:
6.5 oz (184 g)
5.5 oz (156 g)
7.5 oz (213 g)
Black
Black
Black / Satin
Color:
23
Dual Bike Brake Lever
One handed activation operates both front and rear brakes, Single
lever operates two cables.
BMX style lever, Mounts on right or left side of handlebars.
Fits 7/8" diameter (Standard diameter) mountain bike handle bars
Cables are independently adjustable for tension.
Compact lever and brake design.
One size fits both children’s and adult’s hands.
Simple installation.*
Persons missing a limb or with only single arm/hand function.
All Adults. Children old enough to ride a mountain bike independently
(7-8 years and older)
*To ensure safety, TRS recommends that the Dual Bike Brake Lever be
installed and adjusted by a qualified bicycle technician.
Dual Bike Brake Lever available only with a
silver handle as shown.
DON’T FORGET TO ALWAYS WEAR A HELMET!
SKU
Description
UOM
DPDBBMU
Dual Brake Lever
Each
Guitar Pick Adapter
Picks not included.
Applies to most all upper limb conditions.
TRS has developed a simple, highly adjustable, prosthetic, guitar
pick adapter. The Guitar Pick Adapter is constructed so as to be
mounted close to the distal end of the prosthesis.
The Guitar Pick Adapter will readily accept any pick. The pick is
securely held in place with set screws. The Adapter has a lockable
ball and socket component allowing for the pick to be adjusted
to any suitable playing position.
Weight: 3 oz (85 g)
Color: Black and aluminum.
24
SKU
Description
UOM
GUITARPA
Guitar Pick Adapter
Each
Violin Bow Adapters
These TRS prosthetic Violin Bow Adapters use a lockable ball and
socket component modified to readily screw into any standard
prosthesis. The Adapters can be adjusted to any angle to help
ensure optimal playing position and technique.
The bow is held firmly in place with set screws.
Violin bow not included.
Violin Bow Adapter for beginners, entry level.
Violin 2 more advanced model. Bow pivots easily duplicating
natural wrist action and control.
Violin Bow Adapter
Most all upper limb conditions.
Passive, no cable required.
Weight: 4.5 oz (128 g)
Color: Black and aluminum.
SKU
Description
UOM
VIOLIN2
Violin Bow Adapter - for Advanced Players
Each
VIOLINBA
Violin Bow Adapter
Each
Violin 2
Drum Stick Adapter
Drumsticks not included.
The Drum Stick Adapter provides a unique design, which allows
the stick to not only pivot but pivot under an adjustable tension
load. This feature enables the drummer to create spontaneous
“drum rolls” and other drumming techniques.
Drumstick and adapter require simple modification. TRS sends
complete instructions.
The drum stick is held firmly in place with a set screw.
Weight: Approximately 5 oz (142 g)
Color: White plastic/black aluminum.
Note: This product cannot be returned for credit or
reimbursement if modified.
SKU
Description
UOM
DRUMSA
Drum Stick Adapter
Each
25
Freestyle Swimming Device
Acceptable for competition swimming in high school.
Folding wing design reduces resistance during stroke recovery but
flares open to provide maximum resistance during power stroke.
Rotates on prosthesis to create various swimming stroke options.
Passive, no cable required.
NOTES:
The Freestyle Swimming Device can best be used with a custom
shortened swimming prosthesis and a silicone sleeve suspension.
Mount the Freestyle Device as proximally as the limb length allows.
The device is sold in an adult size but can easily be modified to match
smaller hand proportions.
Model:
Freestyle Swimming Device
SKU
FSTSD2
Length:
6" (15 cm)
Width:
5.5" (14 cm)
Thickness:
0.63" (1.6 cm)
Weight:
3.4 oz (96 g)
Color:
White
Materials:
Polypropylene, aluminum and
stainless steel hardware.
KAHUNA TD
Surf-Swim TD
Specially designed for ocean surfing
Constructed of an unbreakable, high strength, polymer with a
concave “palm” to allow for rigorous paddling and rail control
but with flexibility for safety.
Unique “heel” design at its base, that replicates human anatomy,
provides a platform for “pushing up and off the board”.
Aggressive texture on all the surfaces enhances board control.
Standard, stainless steel, threaded stud, mounting system.
Model:
SKU
KAHUNA
Length:
6.25" (15.9 cm)
Width:
4.75" (12. 1 cm)
Depth:
2.5" (6.4 cm)
Weight:
8.1 oz (230 gm)
Color:
26
KAHUNA TD
Black or Sea Blue/Green,
Swim Fin Kit
The Swim Fin Kit provides almost all of the advantages of the Freestyle
Swim Device without the need for a prosthesis.
The kit comes complete with fabrication layouts and directions.
Estimated fabrication time is two hours. TRS recommends fabrication
by a prosthetic technician.
Trans-radial
Adolescent to adult.
Length, width and weight will vary depending upon patient.
Model:
Swim Fin Kit
SFK100
SKU
Thickness:
0.7" (1.8 cm)
Width:
4.75" (12. 1 cm)
Depth:
2.5" (6.4 cm)
Weight:
8.1 oz (230 gm)
Color:
White
Materials:
Polyethylene, foam sheet, latex
tubing, stainless hardwares.
DRAGON TD
Specifically designed for martial arts, wrestling, sparring, grappling, contact
sports and floor exercise type activities.
A soft to medium hardness shock absorbing, flexible polymer. (Multiple
durometers available)
Excels in punching, chopping and grappling.
Uniquely shaped surfaces duplicate fist-like anatomy and provide high
traction.
Cylindrical, shock absorbing cavity and all-polymer construction.
Incredible punching power and cushioned protection for the arm.
Model:
DRAGON TD
DRAGON 60
SKU
Length:
3.7" (9.4 cm)
Width:
2.9" (7.4 cm)
Height:
4.3" (11 cm)
Weight:
10.5 oz (298 g)
Color:
Stealth Black
Materials:
Polyurethane and stainless steel
threaded mounting stud.
27
Hustler TD
The Hustler T. D. is a versatile, lightweight prosthetic aid for playing pool,
billiards, snooker and similar table games.
Easily adjusted for all shot angles.
Rigid, rubber tipped monopod creates a non-slip bridge, while the
swivel ring guides the stick almost friction free.
Adolescent to adult.
Model:
HUSTLER TD
HUSTLR
SKU
Length:
5.25" (13 cm)
Weight:
4.5 oz (128 g)
Color:
Aluminum / Black / White
Materials:
Nylon, neoprene,
aluminum, steel.
AMP-U-POD
Fits all cameras with standard 1/4"-20 hole fitting.
Supports the camera on a lockable tripod mount, which facilitates
photographing at a variety of angles and aids in changing film without
the camera having to leave the security of the prosthesis.
Model:
DPAUP0
Length:
6" (15 cm)
Weight:
2.5 oz (71 g)
Color:
28
Amp-U-Pod
SKU
Non-Glare Black /
Aluminum
Rocky Mountain High Skip Ropes
Enjoy the aerobic and health benefits of rope jumping.
Rocky Mountain High Skip Ropes are designed especially for use with a
prosthesis. These are the same type of light weight, high performance skip
ropes used around the USA by rope skipping exhibition teams.
TRS includes a specially designed skip rope adapter that is angled precisely
to optimize rope skipping with the prosthesis. The Skip Rope handle securely
and safely force fits onto the adapter. The adapter will screw into a standard
prosthetic wrist or disconnect style wrist adapter.
The rope length is easily adjustable and can be shortened and customized to
each individual’s body size and jumping style.
Young adults age eight and older through adult.
Right or left absence.
Bi-lateral custom sets can be made. (Inquire).
Length: Adjustable to fit any body height.
Weight: 2.5 oz (71 g)
Color: White rope with black handles .Matte black finish prosthetic adapter.
SKU
Description
UOM
JR APAPTOR
Jump Rope Adaptor
Each
JUMP ROPE
Jump Rope for Jump Rope Adaptor
Each
29
Wrist Components
TRS NYLON WRISTS
30
SKU
Style
Size
Specifications
INFANTWRIST
Round
Very Small
1.25" (3.2 cm) Diam
TRSCHILDWRIST
Round
Small
1.5" (3.8 cm ) Diam
Accessories
Sure-Lok Cable Lock Control Systems
Applicable for both V/C and V/O operating
systems… improves function and versatility
Eliminates the need to maintain continuous
cable tension for control and grasping
Reliable, MANUAL lever actuation controlling
ON /OFF operation. No fail safe release
Replaces the standard cable, cable housing
system and related hardware entirely
System is complete & includes high
performance, PYTHON STANDARD cable
All instructions and mounting components included
Note: The Sure-Lok systems are the result of a cooperative research, development and
manufacturing partnership between TRS Inc., Toughware Prosthetics and bio-designs,
inc.
Models:
Surface Mount
SKU
Left
Right
VADAL
VADAR
Vertical
Locked
Unlocked
SLVERT
Length:
1.4" (3.6 cm)
1.4" (3.6 cm)
Width:
0.95" (2.4 cm)
0.54" (1.38 cm)
Height:
0.35 -0.5" (0.9-1.3 cm)
1.06" (2.7cm)
Color:
Both Tan & Black Covers
Included
Silver/Black/Gold (Specify)
Only Cover Plate Colored
Cover Plate Length:
NA
2.3" (5.8 cm)
Cover Plate Width:
NA
0.8" (2 cm)
Depth below surface required:
NA
0.625" (1.6 cm)
Vertical Mount *
SURFACE MOUNT SURE-LOK CABLE LOCK AND
CONTROL SYSTEM INCLUDES:
Stainless base system designed to fit various arm radii.
High strength polymer covers and switch levers in both tan
and black.
18" of heavy duty cable housing, liner and TRS Python
Standard Cable.
4 TRS Cable Housing Ferrules.
Hardware.
Complete instructions and DVD installation.
31
Accessories
ELF Straps
The ELF Cross Bar and Cable Control Strap eliminates forever your need to fabricate
cross bar straps.
These straps were developed with over a year of rigorous field testing. The ELF Strap
is designed to enhance cable excursion control by providing a platform and cable
housing, “tunnel” guide to maximize cable excursion around the elbow. Now elbow
flexion can be added to the arsenal of gleno-humeral flexion and bi-lateral scapular
abduction movements to help generate the cable forces needed to operate body
powered prosthetic devices like GRIP Prehensors and V/O Split Hooks.
Waterproof polyurethane material retains flexibility and strength for better cable
performance and efficiency.
Cable tunnel guide enhances cable excursion around the elbow dramatically improving
performance and increasing operational efficiency.
Capable of being used with both Heavy Duty and Standard size cable housing. Special
tubing is enclosed as an accessory that is used to increase the O.D. of Standard Size
Cross bars so that they fit the ELF system.
Unbreakable. ELF STRAPS survived over ONE MILLION cycles of “ninety degree flexion/
extension testing.
Extra long to fit prosthesis with lower trim lines.
Easily modified for length and mounting. Material cuts, drills and finishes
professionally.
Accessory kit includes mounting hardware and complete Installation Instructions.
Models:
ELF Straps
ELFSTRAPTAN
SKU
Length:
6.5" (16.5 cm)
Width / Max. Width:
75" (1.9 cm) / .96" (2.4cm)
Thickness:
.125" (.32 cm)
Max. Thickness (@ Cross Bar):
.50" (1.3 cm)
Weight:
Color:
32
ELFSTRAPBLK
Under .5 oz (14 g)
TRS Tan
TRS Stealth Black
Accessories
ARM SKINZ
TRS ARM SKINZ were developed especially to
provide an improved cosmetic covering and
surface texture alternative to hard, glossy
prostheses for body powered and passive
systems.
ARM SKINZ are not designed for manual labor or
rough, abrasive hobby environments. They are
100% waterproof.
Silicone material throughout in healthy,
complimentary, skin tone, tan color.
Stain resistant and waterproof. Easily cleaned.
Extra long tapered cones in two models fit a wide
variety of prostheses.
Excellent elasticity.
Install easily similar to donning regular cosmetic glove technology.
Elongated, cone configuration in two different tapers/models.
Length: 17" (43 cm)
Thickness: Approximately .060" (.15 cm)
See SIZING CHARTS (on website) to determine the best fit. Sized to fit most arm prostheses and
smaller diameter (pediatric leg prostheses)
SKU
Description
UOM
ARMSKINZAD
Adult Silicone Arm Skin
Each
ARMSKINZCC
Pediatric or Adult Silicone Arm Skin / Custom Colour
Each
ARMSKINZPD
Pediatric Silicone Arm Skin
Each
33
Accessories
Neo-Axilla Loop Padding
Butt Seam (outside)
Lightweight, never bulky. Washable.
Soft tan color, nylon outside (skinside).
Velcro compatible inside surface attaches to hook Velcro stitched to
web along axilla area. Wrap around, peel off design.
Tan Nylon Cloth (skinside)
Won’t chafe. Never sticky. Won’t turn yellow.
Velcro-Compatible Interior
The best axilla loop material available.
Neoprene Cushion
AXL 100 and AXL 250 designed to wrap around 1" wide web.
Hook Velcro
AXL BULK. Customer can cut and size to meet their specific padding applications for either prosthetics or orthotics.
SKU
Width
Roll Length
UOM
AXL125
2 5/16 in
12.5 ft
Each
AXL250
2 5/16 in
25 ft
Each
Pro-Poly Web (Tape) Harness Material
Rapid Adjust Buckles
Pro-Poly Web Harness material is softer, smoother in texture
and more comfortable to wear than standard dacron web
tape.
Pro-Poly Web is also slightly thicker than conventional Dacron
web, so it functions better with TRS Rapid Adjust Buckles.
34
Conventional harness construction is applicable.
Low profile, strong.
Pro-Poly Web can be laundered regularly without damage.
Buckle uses clamp action for securing web.
Locks positively into place anywhere on web.
SKU
Color
Width
Roll Length
UOM
AWEB34BLK
Black
3/4 in
50 ft
Each
One hand operation.
AWEB34RYL
Royal
3/4 in
50 ft
Each
Replaces any three or four bar buckles and most “belt” or
AWEB34RED
Red
3/4 in
50 ft
Each
AWEB34TAN
Tan
3/4 in
50 ft
Each
AWEB34WHT
White
3/4 in
50 ft
Each
AWEB10BLK
Black
1 in
50 ft
Each
SKU
Description
UOM
AWEB10RYL
Royal
1 in
50 ft
Each
ARAB34
3/4" White
Each
AWEB10RED
Red
1 in
50 ft
Each
ARAB34K
3/4" Black
Each
AWEB10TAN
Tan
1 in
50 ft
Each
ARAB10
1" White
Each
AWEB10WHT
White
1 in
50 ft
Each
ARAB1K
1" Black
Each
“latch” type buckles used in orthotic braces.
Excellent for upper extremity prosthetic harnesses to rapidly
adjust cable excursion.
Accessories
BAHA Bio-Mechanically Aligned Harness Anchor
Improves the biomechanics by optimizing the harness axilla angle and creating a more efficient
cable control pathway!
An advancement in body powered harness design!
Replaces the Figure 8 harness ring(s).
High strength and lightweight.
Flexible … conforms to the spine.
Modifiable to accommodate most axilla harness angles.
Translucent tan.
Standard fabrication techniques.
Functions for left or right.
Any figure 8 harness configuration.
Models:
Adult
Pediatriac
BAHA
BAHA PEDI
SKU – Black
BAHA BLK
BAHA PEDI BLK
Length:
3.9" (9.9 cm)
2.9" (7.4 cm)
Width:
2.7" (6.9 cm)
2.0" (5.0 cm)
0.125" (0.3 cm)
0.125" (0.3 cm)
SKU
Thickness:
Weight:
1/2 oz (14 g)
1/3 oz (9.5 g)
Adults
Children; young adults
Applications:
Plush Axilla Loop Padding
Thin but comfortable soft texture.
Washable.
Velcro compatible inside surface attaches to hook Velcro stitched to
web along axilla area. Wrap around, peel off design.
Never sticky. Low profile.
Pediatric and adult applications.
Beige/tan, soft, skin side/outside surfaces.
Plush 250 designed to wrap around 1" wide web or narrower web
strap harness material.
SKU
Description
UOM
PLUSH250
Plush Axilla Padding - 25 ft
Each
35
Accessories
Cable Cleat System
Provides passive closure of TRS prehensors for appearance and
light-duty carrying purposes.
Additional systems may be ordered separately. Specify single or
double ball system.
Instructions show how to epoxy the cleat to lateral side of the
prosthesis.
1/16" dia. braided stainless steel cable, 3 ft. long with either one or
two 3/16" dia. balls swaged 6" from one end. (Cable Cleat System not
available in heavy duty 3/32" dia. cable).
Tan nylon cleat is 1.2" long and can be dyed darker.
SKU
Description
UOM
CCS100
Cable Cleat System (1 Ball)
Each
CCS200
Cable Cleat System (2 Ball)
Each
CCS001
Cleat Only
Each
PYTHON, High Performance, Custom, Stainless Aircraft Cable
Stronger with superior abrasion resistance. The new prosthetic
standard! (Python Cables fits all standard and heavy duty cable
hardware.)
Superior 1 x 19 cable construction
4 x more resistant to abrasion breakage
Low coefficient of friction, longer life, less fraying and breakage
Fits all conventional hardware
25 ft. long coils and competitively priced
SKU
Description
UOM
PYTHONHVY
Python Heavy 3/32" x 25 ft
Each
PYTHONSTD
Python Standard 1/16" x 25 ft
Each
A
B
A NEW PYTHON: High performance, stainless aircraft
cable. 1x19 construction. 19 high strength wires.
B OLD CONVENTIONAL CABLE: 7x7 construction. 49
thin wires.
36
Accessories
Heavy Duty Cable Housing
Superior Grade Teflon Cable Housing Liner
Hosmer® heavy duty stainless steel cable housing.
TRS custom formulation teflon liner, slightly stiffer, longer
Accepts TRS Python Heavy Duty Cable (3/32" dia.) or equivalent.
Accepts standard diameter prosthetic cable (1/16" dia.) with a
TRS Teflon Liner. Accepts new Cable Housing Ferrules.
Hosmer® Heavy Duty Housing is constructed to be used
with any manufacturer's standard heavy duty fittings; cable
housing retainers, cross bars, etc.
SKU
Description
UOM
H50456
Heavy Duty Cable Housing- 25 ft
Each
Perfect Flare Tool
lasting.
Provides low friction, highly efficient lining for standard
diameter stainless steel prosthetic cable.
Sized to fit perfectly into Heavy Duty Cable Housing.
Special material composition eases and enhances flaring the
ends of the liner. See new Cable Housing Ferrules below.
SKU
Description
UOM
ACCHLC
Teflon Cable Housing Liner - 25 ft
Each
Cable Housing
Ferrules
TRS has created a simple,
stainless steel tool to allow you
to create perfect flares on the
ends of teflon liners and similar
materials used in prosthetics.
Press fit into heavy
duty housing traps
teflon liner inside
housing eliminates
need to “flare” liner.
Use with a standard heat gun
and bench vice.
Lubricant impregnated plastic. Friction free, quiet operation.
The Perfect Flare Tool is supplied with complete instructions.
SKU
Description
UOM
APFT10
Perfect Flare Tool
Each
SKU
Description
UOM
CHFERRULE
Cable Housing Ferrules
Each
Pro-Terry Prosthetic Arm Sox
Inner layer: 100% cotton w/Lycra
Outer layer: 100% cotton w/Lycra
A-1 Arm Equivalent, 16" long. Easily modified to shorter lengths.
Full terry lined, air float construction, 3 ply thickness.
Wash/dry, no bleach.
Excellent stretch and rebound.
Excellent life and comfort.
Sold as a unit of six tube socks.
SKU
Description
UOM
ASOX01
Pro-Terry Prosthetic Arm Sox
Each
37
Accessories
Spectra® Prosthetic Cable
Redesigned in 2007. Stronger and tighter weave.
Spectra® cable is a high performance, synthetic, braided cable material with a very low coefficient of friction. Composed of ultra high
molecular weight polyethylene fibers, Spectra® is quiet and strong.
400 ULTRA Spectra® is coated. 30% more abrasion resistant.
Spectra® is an excellent alternative to other “fiber” cables such as dacron and stainless steel cable in situations where stainless has not
performed well.
Spectra® must be installed with a teflon or co-polymer plastic cable housing liner.
Spectra® requires custom tie-on fittings and cannot be swaged.
Trans-radial and trans-humeral limb absence.
Children, adolescents and adults.
SKU
Description
Approx Tensil Strength
Color
Length
UOM
SPECTRA400
Cable
400 lbs
White
50 ft
Each
SPECTRA500
Cable
500 lbs
White
50 ft
Each
SPEC400UB
Ultra Coated
400 lbs
Black
50 ft
Each
SPEC400UW
Ultra Coated
400 lbs
White
50 ft
Each
Spectra® Cable Hanger
These are custom “tie-on” fittings designed to ensure easy, positive attachment of
Spectra® cable. Spectra® fittings are re-useable. Instructions are included.
ASPCH1 is tight on some Dacron webbing. TRS suggests PolyPro webbing.
0.06" thick stainless steel
SKU
Web width
ASPCH1
3/4 or 1 in.
ASPCH2
1/2 in.
Width
UOM
1-1/8"
Each
3/4"
Each
Spectra® Ball Fittings
These are custom “tie-on” fittings designed to ensure easy, positive attachment of Spectra®
cable. Spectra® fittings are re-useable. Instructions are included.
Stainless steel, 1" long.
38
SKU
Description
UOM
ASPCB2
Hosmer® Dorrance® 9/32" Dia Ball
Each
ASPCB3
Hosmer® Dorrance® 9/32" Dia Solo Ball
Each
ASPCB1
TRS 3/16" Dia Ball
Each
Accessories
QD Ball Terminals
It's about time!!! No swagging required
Made from Stainless Steel with a 9/32" ball
Easy maintenance and repair
Bent version relieves control cable bending stresses.
The QDKIT comes one each QD932, QD932B, QDHH.
SKU
Description
UOM
QD932
QD Ball Terminals –Short
Each
QD932B
QD Ball Terminals – Bent
Each
Harness Hanger
The Stainless Steel Harness Hanger is to be used with QD Ball Terminals
SKU
Description
UOM
QDHH
Harness Hanger
Each
Shown complete with ITAL, Figure 9 harness
and EMS Grivory
39
Accessories
In-Line Hook To Grip Adapter
Connects 9/32" diameter ball triple swivels (Hosmer®) to TRS Grip
Prehensors, easily and reliably.
Adapter is stainless steel, 1" long
Supplied with a grommet.
SKU
Description
UOM
H-GADAP
In-Line Hook To Grip Adapter
Each
Locking Pin – Grip Prehensors
A simple, rugged, all stainless steel pin with ball detent and a 1"
diameter finger ring to be used with modified Grip Prehensors.
Prehensor must be modified by drilling through the outer plates with a
#11 drill to accommodate this locking pin (Instructions included.)
One or more locking positions are possible. Manually operated.
Applications include weight lifting, archery, etc. Use anywhere positive,
manual locking and unlocking of Grip Prehensors is desired.
NOTE: TRS does not perform the modification. Modified Grips are not
returnable.
Recommended for weight lifters.
SKU
Description
UOM
AL PIN 3
Locking Pin
Each
ADEPT Cable Adapters
Triple Swivels
One piece, stainless steel, in-line
TRS triple swivels are designed
cable fittings with 3/16" diameter
ball, which accept standard 1/16"
dia. cable only.
with 3/16" terminal balls, specifically
sized for all Grip Prehensors.
Designed exclusively for use with all ADEPT Prehensors and
LiteTouch Hands.
40
SKU
Description
UOM
SKU
Description
UOM
PTG011
Standard 1/16" Diam Cable
Each
PTA010T
Hosmer® Dorrance® 9/32" Dia Ball
Each
PTG012
Heavy Duty 3/32" Diam Cable
Each
ASPCB1
TRS 3/16" Dia Ball
Each
Accessories
EXOS-BOA® O & P Universal Fastening Kit
Kits designed to be used for custom product
fabrication of all types of O & P products (AFOs,
Thigh Lacers, Thoracic and spinal braces, etc.)
BOA® Technology replaces traditional lacing
systems with high performance cable tension and
closure control technology.
Allows for one-handed tension control.
Kits include a wide selection of components
(illustrated below) to provide you with a variety of
design options.
Comprehensive instructions included.
KIT CONTENTS:
6 Meters – B1028-15 Cable
4 Meters – B978 Cable
2 – M3 25 mm Eyestay w/External Tube Ports
1 – M3 Tongue w/Protective Shield
1 –L4 Eyestay 20 mm
1 – L4 Tongue
1 – M2
8 Meters – BOA Tubing
10 – Compact Eyestay Guides 20 mm
10 – Compact Eyestay Guides 30 mm
10 – Resealable Eyestay Guides 20 mm
10 – Resealable Eyestay Guides 30 mm
20 – Web Guides 20 mm
20 – Web Guides 25 mm
10 – LP Tube Guides
2 – Eyestay Edge Lace Terminator
4 – Reselable Ankle Guide Handle
4 – Reselable Ankle Guide
10 – Tongue Underlay 3
10 – Dome Lace Track
6 – T6 Consumer Tool
SKU
Description
UOM
EXOSUVKIT
EXOS Universal Fastening Kit
Each
41
Accessories
Examples of BOA® Technology in use.
J. Wenings
Andrew
Heyd
MIKOSZ/New Touch/LTI
42
Notes
43
QUALITY SERVICE AND PRODUCTS – GUARANTEED WITH CONFIDENCE.

The Component Room – Upper - Myrdal Orthopedic Technologies

Transcription

Similar documents

FOR Save Money. Save Water. - West Basin Municipal Water District

- Included with Park Millennium Cable TV Package

57403 Sandy Koufax 1st Pitch Framed

No Brainer

Keen for Green?

Premiere collaborative design collection with Susanna Galanis

Morote Gari

flyer! - Lm-therm Elektrotechnik AG

view Fossil Watch Printable Size Guide

MXCL-D0135-Maxcell Info Sheet.indd