Dura-Bond 2002 Product Catalog

Transcription

A
COMPANY
TABLE OF CONTENTS
PAGE(S)
SECTION
1
INTRODUCTION
I - XII
2
BEARINGS/ BUSHINGS
GENERAL APPLICATION DATA / HP & OHC REPAIR
SET CONTENTS
COMPONENT LISTING
PROGRESSIVE LISTING BY HOUSING BORE
CAM BEARING TOOL
OVERHEAD CAM REPAIR BEARING APPLICATIONS
SYSTEM INSTALLATION TOOLS / ACCESSORIES
103 113 -
3
VALVE SEATS
GENERAL APPLICATION DATA
UNIVERSAL VALVE SEAT ASSORTMENT
NUMERICAL LISTING
PROGRESSIVE LISTING BY INSIDE DIAMETER
PROGRESSIVE LISTING BY OUTSIDE DIAMETER
METRIC PROGRESSIVE LISTING BY OUTSIDE DIAMETER
119 - 120
121 - 263
- 264
265 - 283
284 - 302
303 - 321
322 - 323
4
VALVE SPRING BOOSTER SHIMS
NUMERICAL LISTING
325 -
5
INTERCHANGE LISTS
BEARING - COMPETITORS INTERCHANGE
SEAT- COMPETITORS INTERCHANGE
SHIM - COMPETITORS INTERCHANGE
343 - 350
351 - 367
- 368
7
VALVE SEAT INSERTS TECHNICAL INFORMATION AND INSTALLATION INSTRUCTIONS
369 - 378
8
CONVERSION REFERENCE CHART
1
59
79
93
58
78
92
100
101
112
118
324
339
340
341
342
- 379
Although the information in this catalog has been gathered from the best available sources and every possible effort has been
made to ensure accuracy, we cannot accept responsibility for any errors or omissions. We would very much appreciate being
advised of any inaccuracies which might come to your attention. Dura-Bond reserves the right to update and change product
specifications at any time without notice.
This catalog contains parts information only. Before installing any part listed, consult the appropriate vehicle manufacturer's
instructional manual for detailed installation instructions.
WARRANTY
Dura-Bond Bearing Company products are warranted to be free from defects of materials or workmanship for one year from the
date of purchase. Dura-Bond Bearing Company's responsibility is limited to the replacement value of the product if Dura-Bond
determines the product to be defective under normal use and service. Claims for labor or related component cost will not be
considered. No other warranty, either expressed or implied, is made.
If you have a product need, we invite you to inquire. Check with us regarding all of your sleeve bearings, valve seats, and
shim needs.
*TRANSMISSION PIECES
*INDUSTRIAL APPLICATIONS
*MOTORCYCLES
*ANTIQUE VEHICLES
*MARINE APPLICATIONS
*BUSHINGS
Copywriter, Editor - Dennis O'leary
Copywriter, Editor, Design Layout - William Dolak
© 2001 DURA-BOND BEARING COMPANY ALL RIGHTS RESERVED.
NO PORTION OF THIS CATALOG MAY BE REPRODUCED WITHOUT OUR EXPRESS WRITTEN PERMISSION.
YEAR
Cyl
cu.in
L
cc.
CAMSHAFT BEARING SET
(ENG SERIES/MAKE/MODEL)
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
ACURA (ALSO SEE HONDA)
4 cyl
2.2L
2156cc 3.346
1996-97
HA-3*
SOHC Honda/Accura F22B1Eng. Accura 2.2CL
(85mm)
5 cyl
2.5L
2451cc 3.346
(1/2 Shell)
1992-98
(85mm)
HA-5*
SOHC 20 valve Honda/Accura G25A1 (92-94),
G25A4 (95-98) Eng. Accura Vigor, 2.5TL
(1/2 Shell)
ALLIS CHALMERS
4 cyl 116ci
1.9L
3.250
1938-63
"
125ci
2.0L
3.375
1957-63
"
149ci
2.4L
3.500
ALL
"
153ci
2.5L
3.438
1956-69
"
175ci
2.9L
3.563
1960-70
"
182ci
3.0L
3.750
1956-58
"
200ci
3.3L
3.875
ALL
"
201ci
3.3L
4.000
1958-70
"
226ci
3.7L
4.000
1933-70
6 cyl 230ci
3.8L
3.438
1956-70
"
262ci
4.3L
3.563
1958-70
"
265ci
4.3L
3.750
ALL
"
273ci
4.5L
3.750
1956-60
"
301ci
4.9L
3.875
ALL
"
426ci
7.0L
4.250
ALL
B, 1B, B15 Tractor thru Serial #64500, RC, TL6, 60H
Harvester, 66 Combine
B15 Tractor from Serial #64501, B125, Roto Baler
A-1
BE, 60H, 148, G149 Series. D Series Tractor, H3
Crawler, I-40 Dozer, RT40 Forklift
153 Series (Includes B153, BD153, D153,
DA153, G153). AT40, F, FD, FL, FP, FT, T,
TD, TG Series Forklift, HD Series Tractor
D175, DA175 Diesel. AT, F Series Forklift. I Series
Tractor
4B, 4BD & 4DA, 182 series (Includes B182, BD182).
FT50, FT50-24 Series Forklift
D2200,G2200,433,433T,2200 Diesel & Turbo Diesel.
860 Harvester. HD4, 940, 7000 Series Tractor
G201, W & WC (After W13665), WD-F, W25, W201,
100, 100SP Combine/Tractor
G, G226, W, WD45, W226 Series Eng. D, M, 100SP,
170, TL, W Series Combine/Tractor
B230, BD230, D230, DA230, G230, W230, WD45D,
WD45EX, 6B & 6DA Series Eng.
B262, D262, D262T, DA262, G262, 6B262, 6D262,
6D262T, 6G262 Series Eng.
G2500
A-1
A-1
BU-2
BU-2
BU-2
A-3^
A-2
A-2
BU-2
BU-2
A-4^
D273, G273, 6D273, 6DA273, 6DAMR273, 6G273
Series Eng. TL14DA Tractor
649, 649T, 2800, 2900, D2800, D2900, G2800,
G2900 Series. L3, M-MH3, TL, 180-200, 545, 860,
7000-8010 Tractor, Combine, Grader
3400, 3400 MKII, 3500, 3500 MKII, 3700, 3750, incl.
D series
BU-2
OHV MORRIS Eng. Metropolitan Nash, Nash
American
OHV MORRIS Eng. Metropolitan Nash, Nash series
1-4
AMC Eng. JEEP Eagle, Premier
DA-2
A-4^
A-5^
AMERICAN MOTORS
4 cyl 73ci
1.2L
1198cc 64.5mm
1954-55
"
90.9ci
1.5L
1489cc 73mm
1956-61
"
150ci
2.46L
3.875
1983-98
"
151ci
2.5L
4.000
1980-83
6 cyl 172ci
2.8L
3.125
1949-52
OHV PONTIAC R eng. AMX, Concord, Eagle,
Kammback, SX-4, Spirit
AMC Rambler, Statesman
DA-2
N-7
CH-16
N-6
"
184ci
3.0L
3.125
1950-54
AMC Nash, Statesman
N-6
"
195.6ci
3.2L
3.125
1958-65
AMC Eng. AMC Rambler Passenger Cars
N-6
*Denotes repair bearing, check "OHC REPAIR BEARING SERVICE INFO" (pgs.101-116) for specs. and tool info.
**Denotes balance shaft bearing
1
^Call for availability
CAM BEARING
DISPLACEMENT
GENERAL APPLICATIONS
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
AMERICAN MOTORS (CONT'D)
6 cyl 196ci
3.2L
3.125
1953-65
"
199ci
3.3L
3.750
1965-70
"
232ci
3.9L
3.750
1964-79
"
242ci
4.0L
3.875
1987-99
8 cyl 250ci
4.1L
3.500
1956-61
6 cyl 258ci
4.23L
3.750
1971-91
8 cyl 287ci
4.7L
3.750
1963-66
AMC Eng. Rambler American, Classic, Statesman.
Hudson, Nash
AMC Rambler American, Classic, Gremlin, Hornet
N-6
AMC Rambler Ambassador, American, AMX-Javelin,
Classic, Concord, Gremlin, Hornet, Marlin, Pacer,
Spirit, Typhoon
AMC-Jeep Eng. Jeep Cherokee, Commanche,
Wagoneer, Wrangler, Jeep Truck
N-7
(Special Oil Control Set w O.D. groove in #2 & #3 position)
AMC Eng. AMC Rambler Ambassador, Classic,
Hornet, Hudson, Rebel
AMC Eng. AMC Rambler Ambassador, AMX,
Concord, Eagle, Gremlin, Hornet, Javelin, Kammback,
Matador, Pacer, Spirit, SX-4
N-7
N-7
N-7B
H-5
N-7
N-7B
H-5
"
290ci
4.7L
3.750
1966-69
AMC Eng. AMC Rambler Ambassador, Classic,
Marlin
"
304ci
5.0L
3.750
1970-79
AMC Eng. AMC Rambler, Jeep
N-9
"
327ci
5.3L
4.000
1956-66
H-5
"
343ci
5.6L
4.080
1967-69
N-9
"
360ci
5.9L
4.080
1970-91
N-9
"
390ci
6.4L
4.165
1968-70
N-9
"
401ci
6.6L
4.165
1971-76
N-9
N-9
AUDI
4 cyl 66.7ci
1.1L
1093cc
1972-ON
50 Series (Balance shaft set)
VWG-1**
"
79.1ci
1.3L
1297cc 75mm
1972-78
SOHC Eng. 80 Series (Balance shaft set)
VWG-1**
"
89.8ci
1.5L
1471cc 76.5mm
1972-75
VWG-1**
"
96.9ci
1.6L
1588cc 79.5mm
1974-86
"
96.9ci
1.6L
1588cc 76.5mm
1982-84
"
104.7ci
1.7L
1716cc 79.5mm
1981-84
5 cyl
2.0L
1986cc 76.5mm
1978-85
"
2.1L
2144cc 79.5mm
1978-86
SOHC 1500S Eng. 80 Series. Audi Fox. (Balance
shaft set)
SOHC Gas 4E, 1600N VW, YG, YH, YK, 80 Series
Eng. Fox 1600 & Audi 4000. (Balance shaft set)
SOHC 4E, 1600N VW, CY Series Diesel & TurboDiesel (83-84) Eng. Audi 4000. (Balance shaft set)
SOHC 4E Series WT Eng. Audi 4000. (Balance shaft
set)
SOHC CN, DE, D24 Series Diesel and Turbo-Diesel
Eng. Audi 5000
SOHC Audi K, W Series Eng. Audi 4000 & 5000
"
2.2L
2226cc 81mm
1984-96
"
2.3L
2309cc 82.5mm
1987-92
VWG-1**
VWG-1**
VWG-1**
VWA-1*
(1/2 Shell)
VWA-1*
(1/2 Shell)
SOHC & DOHC JT, KX, KZ, MC eng. Audi 200, 4000,
5000 incl Turbo
SOHC & DOHC Audi N Series Eng. Audi 80, 90, 100,
5000, Quattro
2
VWA-1*
(1/2 Shell)
VWA-1*
(1/2 Shell)
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
AUSTIN
BL-1
1958-64
OHV Austin A, 8, 85 Series Eng. Austin Hornet, Mini,
Mini-Moke
OHV Austin A, 9AG, 9C Eng. Austin Healey Sprite
71mm
1963-65
OHV Austin Eng. Austin Mini-Cooper
BL-1
1.0L 997cc
62.4mm
1961-65
OHV Austin A Series Eng. Austin Mini-Cooper
BL-1
"
1.0L 998cc
65mm
1961-78
BL-1
"
1.1L 1070cc 71mm
1963-65
OHV Austin A, 9AG Series Eng. Austin Hornet, Mini,
Mini-Cooper
OHV Austin Eng. Austin Mini-Cooper
"
1.1L 1098cc 64.5mm
1961-78
BL-1
DA-2
4 cyl
848cc
63mm
1959-78
"
948cc
62.9mm
"
1.0L 970cc
"
BL-1
BL-1
"
90.9ci
1.5L
1489cc 73mm
1954-61
OHV Austin A, 10 Series Eng. Austin Healey Sprite,
Mini, 1100
OHV A5, A55, B, 14H Eng. Austin and MG
"
98.9ci
1.6L
1622cc 76.2mm
1962-69
A60 Eng. Austin and MG
DA-2
"
109.4ci
1.8L
1798cc 80.2mm
1964-80
OHV Austin/MG Eng. 1800 MK, MKII, MKIII & Marina/
GT
DA-2
1977-96
OHC 3 Housing head casting #1 262 177
Eng. series M10B18
OHC 7 Housing head, 4 Journal cam "Small Six"
casting #1 264 200. Eng. series M20B27. 325e, 528e
OHC 7 Housing head, 7 Journal cam "Small Six"
casting #1 264 200. Eng. series M20B27. 325,
325es, 528e
OHC 4 Housing head "Big Six" casting #1
250 0199. Eng. series M30B28. Bavaria, 2800, 528i,
728i
250 0199. Eng. series M30B30. Bavaria, 3.0CS,
3.0S, 3.0Si, 530i, 630CSi
250 0199. Eng. series M30B32. 533i, 633CSi, 733i
250 0199. Eng. series M30B34. L6, L7, 535i, 535is,
635CSi, 735i, 735iL
250 0199. Eng. series S38B35. M5, M6
BMW
4 cyl
6 cyl
2.7L
"
2.7L
"
2.8L
"
3.0L
"
3.2L
"
3.4L
"
3.5L
2693cc 84mm
2693cc 84mm
2788cc 86mm
2985cc 89mm
3210cc 89mm
3430cc 92mm
3453cc 93.5mm
1982-87
1987-91
1976-ON
1976-ON
1976-86
1982-93
1978-93
BMA-4*
(Full Round)
BMA-2*
(Full Round)
BMA-3*
(Full Round)
BMA-1*
(Full Round)
BMA-1*
(Full Round)
BMA-1*
(Full Round)
BMA-1*
(Full Round)
BMA-1*
(Full Round)
BUDA
4 cyl 153ci
"
175ci
2.9L
3.563
"
182ci
3.0L
3.750
4B182, 4BD182, 4DA182
BU-2
6 cyl 230ci
3.8L
3.438
6B230, 6BD230, 6D230, 6DA230, 6G230
BU-2
4.3L
3.563
6B262, 6D262, 6D262T, 6DA262, 6DD262, 6G262
BU-2
262ci
3.438
BU-2
4B127, 4B153, 4BD153, 4D153, 4DA153, 4B157,
4B158, 4G153
4BD175, 4D175, 4DA175
"
2.5L
3
BU-2
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
BUDA (CONT'D)
6 cyl 273ci
4.5L
3.750
6B273, 6BD273, 6D273, 6DA273
BU-2
BUICK (SEE GENERAL MOTORS)
CADILLAC (SEE GENERAL MOTORS)
CASE TRACTOR
4 cyl 95ci
1.6L
2.750
1936-40
FC
WA-3
W106
CA-3
"
106ci
1.7L
3.000
"
123ci
2.0L
3.125
1936-40
FK
WA-3
"
124ci
2.0L
3.250
1942-58
124, F124, VA124, VA, VAE
CA-3
"
126ci
2.1L
3.125
1955-61
126, G126
CA-3
"
148ci
2.4L
3.375
1955-70
148, 148B, 148G, G148, G148B, G149
CA-3
"
159ci
2.6L
3.500
1961-70
159, 159B, 159G, G159, G159B
CA-3
"
164ci
2.7L
3.563
1957-64
164, G164
CA-3
3 cyl 180ci
2.9L
4.016
4 cyl 188ci
3.1L
3.813
1977-ON
3B, 3BT B Series Cummins Diesel, Turbo-Diesel
(Used in No. 1 position only)
188D, G188D (w/ Tach drive)
CU-12
CA-9
"
188ci
3.1L
3.813
1963-70
188, 188B, 188S, G188 (4 Bearing set)
CA-8
"
188ci
3.1L
3.813
1963-70
G188B (3 Bearing set)
CA-4
201ci
3.3L
3.938
201 Series Eng. 660 Combine
CA-8
"
207ci
3.4L
4.000
1977-ON
207, 207D, G-207D (w/ Tach drive)
CA-9
"
238ci
3.9L
4.016
ALL
"
251ci
4.1L
4.000
1957-69
"
267ci
4.4L
4.125
1955-70
"
284ci
4.7L
4.250
1961-69
"
301ci
5.0L
4.375
1961-69
"
336ci
5.5L
4.625
6 cyl 360ci
5.9L
4.016
ALL
6.2L
4.000
1953-66
4-390, 4T-390 B Series Cummins Diesel, Turbo-Diesel
251, 251B, 251BG, 251D, A251, A251G, A251LP,
A251S (Late Engs. w/ 2.250" dia journals)
267, 267B, 267BD, A267, A267D
(Late Engs. w/ 2.250" dia journals)
284, 284B, A284G, A284LP, A284S
301, 301B, 301BD, 301BG, A301, A301BD, A301D,
A301DF (Late Engs. w/ 2.250" dia journals)
336, 336B, 336BD, 336BDT Diesel eng.
6-590B, 6T-590 B Series Cummins Diesel, TurboDiesel (Used in No. 1 position only)
377, 377A, 377BG, A377, A377D, A377G, A377LP,
A377S after serial #2323001 (Late Engs. w/ 2.250"
dia journals)
"
377ci
4
CU-12
CA-6
CA-6
CA-6
CA-6
CA-6
CU-12
CA-7
Hi Perf
(1/2-Full Shell)
YEAR
Cyl
cu.in
L
cc.
OHC REPAIR
Bore
Standard
CASE TRACTOR (CONT'D)
6 cyl 401ci
6.6L
4.125
1961-69
"
451ci
7.4L
4.375
"
504ci
8.3L
4.625
"
504ci
8.3L
4.490
ALL
401, 401B, 401BD, 401BDT, 401D, A401, A401B,
A401BD, A401D (Late Engs. w/ 2.250" dia journals)
451, 451B, 451BD, 451BDT, 451D, 451DT, A451BD,
A451D (Late Engs. w/ 2.250" dia journals)
504, 504B, 504BD, 504BDT, 504BDTI, 504D, 504DT,
504DTI, 504TC, A504BD, A504BDT
C Series Diesel, Turbo-Diesel
1965-69
5.2L
4.500
ALL
3204
5.7L
4.500
ALL
D330, 1670
CA-7
CA-7
CA-7
CA-11^
CAT-1^
CATERPILLAR
4 cyl 318 ci
"
350ci
Cam Bearings: Position #1 OE#9M5477
Position #2 & 3 OE#7M4046
Balance Shaft Brgs: Position #1, 2, 5, 6 OE#9M5239
Position #3, 4 OE#9M5238
"
425ci
7.0L
4.750
ALL
Position #2 & 3 OE#7M4046
Balance Shaft Brgs: Position #1, 2, 5, 6 OE#5S6419
Position #3, 4 OE#5S6420
8 cyl 522ci
8.5L
4.500
ALL
1140, 1145, 3145
6 cyl 525ci
8.6L
4.500
ALL
D333, D333A, G333, 1673
Position #2-5 OE#7M4046
Balance Shaft Brgs: Position #1, 2, 5, 6 OE#9M5239
"
573ci
9.4L
4.500
ALL
1150, 3150
"
636ci
10.4L
4.500
ALL
"
638ci
10.5L
4.750
ALL
1160,3160,3208 (early & late)
V150,V175,V200,V225
D333, D334, 1673, 1674, 3306
Position #2-5
OE#7M4046
Balance Shaft Brgs: Position #1, 2, 5, 6 OE#5S6419
5.750
OE#4H9640, 8F8521
Position #2
14.6L
5.400
ALL
OE#8F8523
Position #1, OE#4N0685
18.0L
5.400
CAT-2-1
CAT-2-2
CAT-2-5**
CAT-2-6**
CAT-2
CAT-2-1
CAT-2-2
CAT-2-3**
CAT-2-4**
ALL
CAT-3-1
CAT-3-2
1693, 3406, 3406B, 3406C, 3406E Caterpillar TurboDiesel & LPG
Position #2-7, OE#4N6658
8 cyl 1099ci
CAT-2-3**
CAT-2-4**
CAT-2
D339, D7700, D8800
Position #1
6 cyl 893ci
CAT-2-1
CAT-2-2
CAT-2
13.6L
CAT-2-5**
CAT-2-6**
D330, 3304
4 cyl 831ci
CAT-2-1
CAT-2-2
CAT-4-1
CAT-4-2
3408
Position #2,3,4 OE#4N0685
Position #1 & 5 OE#4N6658
5
CAT-4-1
CAT-4-2
Hi Perf
(1/2-Full Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
OHC REPAIR
Bore
Standard
Hi Perf
(1/2-Full Shell)
CATERPILLAR (CONT'D)
6 cyl 1246ci
20.4L
5.750
ALL
D342, G342, D13000
Position #1
OE#4H9640, 8F8521
Position #2
12 cyl 1649ci
27.0L
5.400
ALL
OE#8F8523
CAT-3-1
CAT-3-2
3412
Position #2-6 OE#4N0685
Position #1 & 7 OE#4N6658
CAT-4-1
CAT-4-2
CHECKER MOTORS CORP.
6 cyl 226ci
3.7L
3.312
1947-64
Continental Eng.
K-1
CH-17
CHP-17
"
229ci
3.8L
3.736
1980-82
Chevrolet K Series V-6 Eng.
"
230ci
3.8L
3.875
1964-68
Chevrolet Eng.
"
250ci
4.1L
3.875
1969-75
Chevrolet D Series Eng. (Late Models)
"
250ci
4.1L
3.875
1969-70
Chevrolet Eng. (Early Models)
CH-7
8 cyl 267ci
4.4L
3.500
1980-82
Chevrolet J Series Eng.
CH-8
CHP-8
CH-7
CH-11
"
283ci
4.6L
3.875
1964-68
Chevrolet (includes C Series) Eng.
CH-8
CHP-8
"
305ci
5.0L
3.736
1977-82
Chevrolet H, U Series Eng.
CH-8
CHP-8
"
307ci
5.0L
3.875
1968-72
Chevrolet A Series Eng.
CH-8
CHP-8
"
318ci
5.2L
3.910
1959-67
PD-16
PDP-16
"
327ci
5.3L
4.000
1964-69
Chrysler A, E, MD2, P31, R31, S31, T31, V31 318
Series Eng.
Chevrolet Eng.
CH-8
CHP-8
"
350ci
5.7L
4.000
1969-80
Chevrolet (includes L Series) Eng.
CH-8
CHP-8
CHEVROLET (SEE GENERAL MOTORS)
CHEVROLET MARINE
4 cyl 181ci
3.0L
4.000
1982
Marine & Industrial Eng.
CH-6
CHRIS CRAFT MARINE (SEE ENGINE MFG.)
CHRYSLER CORP.
4 cyl 86ci
"
"
89.6ci
97.5ci
1.4L
1.5L
1.6L
1410cc 74mm
1468cc 75.5mm
1597cc 76.9mm
1979-84
1985-96
1978-89
MIA-3*
SOHC Type J, G12B, 2 Mitsubishi Eng.
Dodge Colt, Plymouth Champ
SOHC 8 valve Series A, K, P, Q, X, G15B, 4G15
Mitsubishi Eng. Dodge Colt, Premier
SOHC incl. turbo Series G32B, F, Z, 3 Mitsubishi Eng.
Dodge Challenger, Colt, Premier, Sapporo
(Full Round)
MIA-3*
(Full Round)
MIA-1*
(1/2 Shell)
MIA-2*
(Cam brg set w heavy wall, .020 oversize O.D.)
(1/2 Shell)
"
104.7ci
1.7L
1716cc 79.5mm
1978-83
SOHC 4E Series A, B, WT VW Eng. Dodge Charger,
Horizon, Omni, Turismo, Scamp (Balance shaft set)
6
VWG-1**
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
CHRYSLER CORP. (CONT'D)
4 cyl 121.2ci
2.0L
1986cc 88.9mm
Chrysler Marine w 115, 130 Series Volvo Eng.
VO-2**
(Aux/Balance shaft set)
"
122ci
2.0L
1995cc 84mm
1974-82
SOHC 12 valve G52 Mitsubishi (Balance shaft set)
(Balance shaft set w .173 oversize O.D.)
(Balance shaft elim)
"
122ci
2.0L
1996cc 87.5mm
1994-98
MIG-2**
MIG-2-1R**
MIG-2E**
PDA-3*
Chrysler SOHC A588 Series Eng. Dodge Neon
(Full Round)
"
122ci
2.0L
1997cc 85mm
1989-98
"
135.1ci
2.2L
2213cc 87.5mm
1981-94
SOHC 8 valve G63B (83-89), DOHC 16 valve 4G63
(90-94) Mitsubishi Eng. incl. turbo. Dodge D50, Ram,
Laser, Talon (Balance shaft set)
SOHC Series A, B, C, D, E, F, J, K, 8 Chrysler Eng.
incl. Turbo. Chrysler, Dodge, Plymouth: Aries, Caravan,
Caravelle, Charger, Daytona, Duster, Dynasty, E-Class,
Laser, New Yorker, Omni, Reliant, Shadow, Spirit,
Voyager
MIG-3**
PDA-1*
(1/2 Shell)
PDA-2*
(OHC .020 oversize brg set)
(1/2 Shell)
(Balance shaft set)
"
143ci
2.3L
2346cc 91.1mm
1983-86
SOHC D, 4D55T Series Turbo-Diesel Mitsubishi Eng.
Dodge Ram (Balance shaft set)
"
143.4ci
2.4L
2351cc 86.5mm
1989-98
PDG-26**
MIG-2**
MIG-2-1R**
MIG-2E**
MIA-1*
SOHC 8 valve 4G64, G64B T Series Mitsubishi Eng.
Dodge LD Truck, Summit, Vista
(1/2 Shell)
MIA-2*
(Balance shaft set)
"
"
153ci
2.46L 2460cc 3.875
1983-98
AMC/Chrysler Eng. AMC Eagle Premier
2.5L
1981-96
SOHC Series A, B, C, D, E, F, J, K, 8 Chrysler Eng.
incl. Turbo. Chrysler, Dodge, Plymouth: Aries, Caravan,
Caravelle, Charger, Daytona, Duster, Dynasty, E-Class,
Laser, New Yorker, Omni, Reliant, Shadow, Spirit,
Voyager
2507cc 87.5mm
MIG-3**
N-7
(1/2 Shell)
PDA-1*
(1/2 Shell)
PDA-2*
(OHC .020 oversize brg set)
(1/2 Shell)
(Balance shaft set - semi-finished)
"
155.8ci
2.6L
2555cc 91.1mm
1978-92
PDG-29**
MIA-1*
SOHC Carb & F.I. G54B - F, W Series Mitsubishi Eng.
incl. Turbo. Chrysler, Dodge, Plymouth: Arrow,
Charger, Challenger, Colt, Sapporo, D-50 Truck
(1/2 Shell)
MIA-2*
(Balance shaft set)
6 cyl 165.5ci
2.7L
"
170ci
2.8L
"
181.1ci
3.0L
"
182ci
3.0L
"
198ci
3.2L
1937-on
3.400
2972cc 91.1mm
1960-71
1987-99
2980cc 88.9mm
3.400
1970-76
Chrysler 6 cyl Eng. Chrysler, DeSoto, Dodge,
Plymouth passenger cars & 100-500 Series Truck
OHV Dodge/Chrysler Slant 6 Eng. Dodge, Plymouth:
Barracuda, Dart, Lancer, Valiant, 100-500 Series Trucks
SOHC & DOHC 6G72 and DOHC 6G72-T (Turbo)
Mitsubishi V-6 Eng. Acclaim, Caravan, Dynasty, New
Yorker, Stealth, Voyager
Chrysler Marine w 165, 170 Series Volvo Eng.
Dodge/Chrysler Slant 6 Eng. Barracuda, Dart, Demon,
Duster, Fury, Lancer, Swinger, Valiant. 100-500
Series Trucks
7
MIG-2**
MIG-2-1R**
MIG-2E**
PD-3
(1/2 Shell)
PD-18
MIA-5*
(1/2 Shell)
VO-3
PD-18
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
6 cyl 201ci
3.3L
3.661
1990-99
OHV Chrysler V-6 eng. Caravan, Concorde, Dynasty,
5th Ave., Imperial, Intrepid, New Yorker, Town
& Country, Voyager & Ind. Power Units
Chrysler L-Head Eng. Chrysler, DeSoto, Dodge,
OHV Chrysler 6 cyl Eng. Chrysler, DeSoto, Dodge,
Plymouth passenger cars & 100-500 Series Truck &
Ind. Power Units
OHV Dodge/Chrysler Slant 6 Eng. (incl. late series w
cast crankshaft.) Chrysler, Dodge, Plymouth
passenger cars & 100-600 Series Trucks
OHV Dodge/Chrysler Slant 6 Eng. (incl. early series w
forged crankshaft). Dodge, Plymouth: Barracuda,
Dart, Lancer, Valiant, 100-500 Series Trucks &
Ind. Power Units
Ind. Power Units
OHV Chrysler V-6 Eng. Caravan, Concorde, Dynasty,
5th Ave., Imperial, Intrepid, New Yorker, Town
& Country, Voyager
"
217.8ci
3.6L
3.250
1933-56
"
218ci
3.6L
3.375
1938-54
"
225ci
3.7L
3.400
1979-87
"
225ci
3.7L
3.400
1960-78
"
228ci
3.7L
3.375
1936-56
"
230ci
3.8L
3.250
1934-59
"
231ci
3.8L
3774cc 3.780
1991-99
"
237ci
3.9L
3.438
1937-52
"
239ci
3.9L
3.910
1986-99
"
241ci
4.0L
3.875
1987-99
(98.4mm)
Ind. Power Units
OHV Chrysler-Dodge V-6 Eng. Dodge Truck & Van:
Dakota, Ram 100, 150, 250, 350 Series
OHV AMC/Chrysler Eng. Cherokee, Comanche,
Sportwagon, Wagoneer, Wrangler, YJ Series
(Special brg set w O.D. groove in #2 & 3 pos.)
"
241.5ci
4.0L
3.375
1937-41
"
243ci
4.0L
3988cc 92mm
1978-79
"
251ci
4.1L
3.438
1942-68
"
265ci
4.3L
3.438
1952-68
8 cyl 273ci
4.5L
3.625
1962-69
"
277ci
4.5L
3.750
1956-57
"
301ci
4.9L
3.625
1955
"
301ci
4.9L
3.910
1957
Chrysler 6 cyl Eng. Chrysler, DeSoto, Dodge,
Ind. Power Units
OHV Mitsubishi 6DR5, H Series Diesel Eng. Dodge
Truck & Van: 150, 200, 250, 300, 350 Series
Ind. Power Units
Ind. Power Units
OHV Chrysler V-8 Eng. (incl. 273A Series.) Chrysler,
Dodge, Plymouth passenger cars & 100-300 Series
Truck
OHV Chrysler V-8 Eng. Chrysler, Dodge,
PD-28
PD-28B
PD-1
PD-3
PD-21
PD-18
PD-3
PD-1
PD-28
PD-28B
PD-3
PD-27
N-7
N-7B
PD-3
MI-1^
PD-3
PD-3
PD-16
PDP-16 or
PDP-16T
PD-16
PDP-16 or
PDP-16T
(Coated)
(Coated)
OHV Chrysler Canadian V-8 Eng. Chrysler, Dodge,
Plymouth: Windsor
OHV Chrysler V-8 Eng. incl. Hemi. Chrysler, Dodge,
Plymouth: Belvedere, Fury, Savoy
PD-8
PD-16
PDP-16 or
PDP-16T
(Coated)
8
(1/2-Full Shell)
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
8 cyl 303ci
5.0L
3.813
1956-58
OHV Chrysler V-8 Eng. incl. Canadian. Chrysler,
Dodge, Plymouth: Belvedere, Fury, Savoy
PD-16
PDP-16 or
PDP-16T
(Coated)
"
313ci
5.1L
3.875
1957-66
OHV Chrysler V-8 Eng. incl. Canadian. Chrysler,
Dodge, Plymouth: Belvedere, Fury, Savoy
PD-16
PDP-16 or
PDP-16T
"
318ci
5.2L
3.910
1957-79
PD-16
PDP-16 or
PDP-16T
"
318ci
5.2L
3.910
1980-98
OHV Chrysler V-8 Eng. (early). Chrysler, Dodge,
Plymouth passenger cars & 100-600 Series Truck,
Van & Ind. Power Units
OHV Chrysler V-8 Eng. (late). See applications above
PD-25
PDP-25 or
PDP-25T
"
326ci
5.3L
3.950
1959
OHV Chrysler Canadian V-8 Eng. Chrysler, Dodge,
Plymouth: Dodge Coronet
PD-16
PDP-16 or
PDP-16T
"
331ci
5.4L
3.813
1951-56
"
340ci
5.6L
4.040
1968-73
Plymouth: Imperial, New Yorker, Saratoga, Windsor,
300. C Series Trucks & Ind. Power Units
OHV Chrysler V-8 Eng. & Hi-Perf. Chrysler, Dodge,
Plymouth: Barracuda, Belvedere, Challenger, Charger,
Coronet, Dart, Demon, Duster, GTX, Polara, Road
Runner, Satellite, Valiant
OHV Chrysler V-8 Eng. Chrysler, DeSoto, Dodge,
Plymouth: Belvedere, Custom, D500, Firesweep,
Royal, Savoy
Plymouth: Imperial, New Yorker, Saratoga, Windsor,
300. 600-900 Series Trucks & Ind. Power Units
B, 6B Series Cummins Diesel & Turbo-Diesel
Dodge Trucks: Power Ram, Ram, 250, 350
OHV Chrysler V-8 Eng. (late).
Van incl. Ram, Power Ram, Ramcharger
OHV Chrysler V-8 Eng. (early). See applications above
Van incl. Ram, Power Ram, Ramcharger
OHV Chrysler V-8 Eng. Chrysler, Dodge,
Plymouth passenger cars & MD to HD (500-1000)
Series Truck & Ind. Power Units
OHV Chrysler V-8 Eng. incl. Canadian & Hi-Perf.
Chrysler, Dodge, Plymouth: Adventurer, Barracuda,
Belvedere, Challenger, Charger, Coronet, Dart, Duster,
Fury, GTX, New Yorker, Newport, Polara, Road
Runner, Satellite, Valiant, Windsor, 100-300 Series
Trucks & Ind. Power Units
OHV Chrysler V-8 Eng. incl. Hemi. Chrysler Passenger
Cars: Imperial, New Yorker, 300 Series
OHV Chrysler V-8 Eng. incl. Hi-Perf. Chrysler, Dodge,
Van incl. Ram, Ramcharger & Ind. Power Units
OHV Chrysler V-8 Eng. Chrysler, Dodge, Plymouth:
Custom, Imperial, Monaco, New Yorker, Polara,
Windsor & MD to HD (600-1000) Series Truck &
Ind. Power Units
(Coated)
(Coated)
(Coated)
(Coated)
"
350ci
5.7L
4.063
1958
"
354ci
5.8L
3.938
1956-59
6 cyl 359ci
5.9L
4.016
1989-02
8 cyl 360ci
5.9L
4.000
1980-99
"
360ci
5.9L
4.000
1971-79
"
361ci
5.9L
4.125
1957-77
"
383ci
6.3L
4.250
1959-72
"
392ci
6.4L
4.000
1957-58
"
400ci
6.6L
4.342
1972-79
"
413ci
6.7L
4.188
1959-77
9
PD-8
PD-16
PDP-16 or
PDP-16T
(Coated)
PD-17
PDP-17 or
PDP-17T
(Coated)
PD-8
CU-12
PD-25
PDP-25 or
PDP-25T
PD-16
PDP-16 or
PDP-16T
PD-17
PDP-17 or
PDP-17T
PD-17
PDP-17 or
PDP-17T
(Coated)
(Coated)
(Coated)
(Coated)
PD-8
PD-17
PDP-17 or
PDP-17T
PD-17
PDP-17 or
PDP-17T
(Coated)
(Coated)
(1/2-Full Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
PD-17
PDP-17 or
PDP-17T
8 cyl 426ci
"
"
440ci
446ci
7.0L
7.2L
7.2L
4.250
4.320
4.125
1963-71
1966-79
1979-80
OHV Chrysler V-8 incl. Hemi Eng. - Canadian & Hi-Perf.
Chrysler, Dodge, Plymouth: Barracuda, Belvedere,
Challenger, Charger, Coronet, Custom, Fury, GTX,
Monaco, Polara, Road Runner, Satellite, Savoy,
100-300 Series Trucks & Ind. Power Units
OHV Chrysler V-8 Eng. incl. Hi-Perf. Chrysler, Dodge,
Van incl. Ram, Ramcharger, Trailduster, Voyager
& Ind. Power Units
IHC-Navistar MV-446 Eng. MD Dodge Trucks & Ind.
(Cam brg set w .020 oversize O.D.)
"
478ci
7.8L
10 cyl 488ci
8.0L
8 cyl 549ci
9.0L
1969-74
IHC-Navistar Eng. Dodge Trucks & Ind.
4.000
1992-02
4.500
1969-77
OHV Chrysler Cast Iron V-10 Model E (92-02),
Model W (94-99) 250-350 Series Trucks
IHC-Navistar Eng. Dodge Trucks & Ind.
(Coated)
PD-17
(Coated)
IN-17
IN-17R2
IN-10A
PD-30
IN-10A
COLT (SEE CHRYSLER CORP.)
CONQUEST (SEE CHRYSLER CORP.)
CONTINENTAL
4 cyl 69ci
1.1L
2.500
Y69, Y4069 & PY69
CO-3
"
91ci
1.5L
2.875
Y91, Y4091, PY91 & P410
CO-3
"
112ci
1.8L
3.188
BY112, BY4112, Y4112, PY112, PY4112 & Y112
CO-3
"
120ci
2.0L
3.188
Z120
CA-3
"
124ci
2.0L
3.000
VAB124
CA-3
"
124ci
2.0L
3.000
A4124, F124, F4124 & PF124
CO-8
"
129ci
2.1L
3.250
Z129
CA-3
"
134ci
2.2L
3.313
Z134
CA-3
"
135ci
2.2L
3.125
F135
CO-8
"
140ci
2.3L
3.188
F140, F4140, LF140 & PF140
CO-8
"
142ci
2.3L
3.000
F4142 & A4142
CO-8
"
145ci
2.4L
3.250
FS145
CO-8
"
145ci
2.4L
3.375
Z145
CA-3
"
162ci
2.6L
3.438
F162, F4162, F4162 Super, LF162 & PF162
CO-8
"
163ci
2.7L
3.438
F163, F4163, PF163
CO-8
10
PDP-17 or
PDP-17T
(1/2-Full Shell)
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
CONTINENTAL (CONT'D)
4 cyl 168ci
2.8L
3.000
F168
K-1
6 cyl 170ci
2.8L
3.250
D6170, DS6170, F170, F6170, PD170, PF170
K-1
"
184ci
3.0L
3.125
D6184, DS6184
K-1
"
186ci
3.0L
3.000
F186, PF186, F6186
K-1
4 cyl 193ci
3.2L
3.750
D193
CO-9^
198ci
3.2L
3.438
F198
CO-8
6 cyl 199ci
3.3L
3.250
D6199, F199, F206, F6199, PD199, PF199
K-1
"
"
202ci
3.3L
3.125
D6202, DS202, DS6202, OS202, PD202
K-1
"
209ci
3.4L
3.188
F209, F6209, F6209 Dynatork, PF209
K-1
"
218ci
3.6L
3.250
K-1
"
226ci
3.7L
3.313
D6218, DS6218, F214, F218, F6218, FS218, PD218,
PF218
CF6226, F226, F6226, PF226
"
227ci
3.7L
3.313
F227 & F6227
K-1
"
242ci
4.0L
3.313
F242, F6242
K-1
"
244ci
4.0L
3.438
F244, FS244, F6244
K-1
"
245ci
4.0L
3.313
F245, F6245
K-1
"
253ci
4.1L
3.625
M6253
CO-7^
"
271ci
4.4L
3.625
K6271, M271, M6271, 38B, 40B
CO-7^
"
290ci
4.7L
3.750
K6290, M290, M6290
CO-7^
"
330ci
5.4L
4.000
K6330, M330, M6300, M6330, M6338
CO-7^
"
363ci
5.9L
4.000
K6363, M363, M6363
CO-7^
"
427ci
7.0L
4.313
K6427
CO-7^
3B, 3BT B Series Cummins Diesel, Turbo-Diesel
4B3.9, 4BT3.9, 4BTA3.9, 4-390, 4T-390 B Series
Cummins Diesel, Turbo-Diesel (Used in No. 1 pos. only)
Cummins V-6 Eng. V-6-140 Phase 5 Series F,
Series D4 & D5, V352 Phase 3, 3.5, 3.5D, 5, 5F
B, 6B, 6BT Series Cummins Diesel & Turbo-Diesel
Dodge Trucks: Power Ram, Ram, 250, 350
Cummins V-6 Eng. V378, VT378 Phase 5 Series F,
V-6-155 Phase 5 Series F
CU-12
K-1
CUMMINS
3 cyl 180ci
2.9L
4.016
ALL
4 cyl 238ci
3.9L
4.016
ALL
6 cyl 352ci
5.8L
4.625
"
359ci
5.9L
4.016
"
378ci
6.2L
4.625
1989-02
11
CU-12
CU-11A
CU-12
CU-11A
Hi Perf
(1/2-Full Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
CUMMINS (CONT'D)
4 cyl 448ci
7.3L
4.875
6 cyl 464ci
7.6L
4.438
8 cyl 470ci
7.7L
4.625
4 cyl 495ci
8.1L
5.125
8 cyl 504ci
8.3L
4.625
Cummins GNHC-4, H135, HR, HR-4, HR160, HRC-4,
H Series from S/N 120911
Cummins Diesel & Turbo Diesel GNH 180, C160-C240,
C, CS, CT 464 Series
V-8-185 Phases 3, 3.5, 5 Series D,4,5 Series F
V470 Phases 3.5 Series D, 4, 5 Series F
CU-10
CU-5A
CU-11
(Brgs shown for engines with 2.186 housing bore only)
Cummins NH-4, NHC-4, NT-4, NT-165, NT-180, NT-200,
N495, N495C130, N495F, N495P130, N495PG130,
N 495, NT 495, NTA 495 Series
Cummins V-8-210, V504, VT555 Phase 5 Series F
CU-10
CU-11
(Brgs listed for engines with 2.186 housing bore only)
"
555ci
9.1L
Cummins V555 & VT555 (Brgs listed for engines with
4.625
CU-11
2.186 housing bore only)
6 cyl 672ci
11.0L
4.875
672ci
11.0L
4.875
"
743ci
12.2L
5.125
"
743ci
12.2L
5.125
"
855ci
14.0L
5.500
"
855ci
14.0L
5.500
8 cyl 903ci
14.8L
5.500
6 cyl 927ci
15.2L
5.500
1977-ON
1977-ON
1977-ON
Cummins NH180, NH195, NHD180, NHH180, NHH195,
NHH220. H, HR, HS, N, NH 672 Series small cam series
Cummins 2 1/2 inch big cam series 3/32 (.0939) wall
CU-5A
GNH220, H, HS, N, NH, NHC, NHCT, NHD, NHE, NHF
NHHR, NHHT, NHR, NHS, series & NS, NT, NTA, NTC,
NTE, NTF, NTO small cam series, O.E. Brg Set # BM27253
CU-5A
Formula 230, 250,290, 300, 350,GNH250, N14-330E,
N14-350E, N14-370E, N14-410E, N14-435E, N14-460E,
N14-485E, N14-525E, N14-330ESP, N14-370ESP,
N14-435ESP 2 1/2 inch big cam series, 3/32 (.0939) wall
H, HS, N, NH, NHC, NHCT, NHD, NHE, NHF, NHHR,
NHHT, NHR, NHS series & NT, NTA, NTC, NTE,
NTF,NTO series Power torque 270, 300 & 330
(small cam series, O.E. Brg Set # BM27253)
CU-9
2 1/2 in big cam series 3/32 (.0939) wall
Big Cam (2.500" dia.) Engs. W/2.625" cam housing,
1/16" (.0621) wall
Cummins V-8 Series Formula 903, V903,
VT903-Turbo
Super 250, Super 270, Super 300, Super 330
CU-9
CU-5A
CU-9
CU-14^
CU-13^
CU-5A
DAIHATSU
4 cyl
1.0L
955cc 68mm
1964-77
FE Series
DI-1^
"
2.5L
2530cc 88mm
1969-82
DG Series Diesel
DI-2^
2.8L
2765cc 92mm
1983-88
DL Series Diesel
DI-2^
"
DATSUN (SEE NISSAN)
DETROIT DIESEL
2 cyl 106ci
1.7L
3.875
Detroit Diesel 2-53, 2-53N
DE-2**
(Camshaft brg & balance shaft bushing set, 5 pcs)
"
142ci
2.3L
4.250
Detroit Diesel 2-71, for Engs. after serial no.
2A-37623 only (Camshaft brg & balance shaft bushing set)
12
DE-1**^
Hi Perf
(1/2-Full Shell)
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
DETROIT DIESEL (CONT'D)
3 cyl 159ci
2.6L
3.875
DE-2A**^
Detroit Diesel 3-53,3-53N
(Camshaft brg & balance shaft bushing set)
4 cyl 212ci
3.5L
3.875
Detroit Diesel 4-53,4-53N, 4-53T
DE-7**^
"
213ci
3.5L
4.250
Detroit Diesel 3-71, 3-71N incl. Engs.
#3A-27384
(Camshaft brg-order individually-3 req.)
(After S/N 3A-27384 balance shaft set (8 brgs) semi)
(Camshaft thrust washer set (4/set))
"
284ci
4.7L
4.250
Detroit Diesel 4-71, 4-71E-N, SE, 4-71T incl. Engs.
from serial #4A-59280
6 cyl 318ci
5.2L
3.875
426ci
7.0L
4.250
8.2L
4.252
6 cyl 552ci
9.0L
4.840
Detroit Diesel OHV Fuel Pincher Diesel and TurboDiesel 8.2, 8.2N, 8.2T Series, O.E. Cam Brg #8920077
Detroit Diesel 6V-92, 6V-92N, 6V-92T Series
(Balance shaft set (8 brgs) semi)
8 cyl 568ci
9.3L
4.250
12.1L
4.840
14.0L
4.250
1104ci
18.0L
4.840
18.6L
4.250
1472ci
24.1L
4.840
DE-6-2^
DE-6S**^
DE-6-1WS^
DE-6-2^
DE-6S**^
DE-6-1WS^
Detroit Diesel 16V-71, 16V-71N, T
"
DE-6-2^
DE-6S**^
DE-6-1WS^
Detroit Diesel 12V-92, 12V-92T, TA, TT, TTA Series
16 cyl 1136ci
DE-6-2^
DE-6S**^
DE-6-1WS^
Detroit Diesel 12V-71, 12V-71N, T, TA Series
"
DE-6-2^
DE-6S**^
DE-6-1WS^
Detroit Diesel 8V-92, 8V-92N, T, TA-TTAC Series
12 cyl 852ci
DE-6-2^
DE-6S**^
DE-6-1WS^
DE-4
Detroit Diesel 8V-71, 8V-71E, N, NE, T, TA-TTAC Series
8 cyl 736ci
DE-5**
DE-5R1**^
Detroit Diesel 6-71, 6-71E-N, SE, 6-71T and V-6 6V71,
6V-71E-N, 6V-71T
8 cyl 500ci
DE-6-2^
DE-6S**^
DE-6-1WS^
Detroit Diesel 6V-53, 6V-53E-N, SE, 6V53T
(+.010 oversized camshaft brg & balance shaft bushing set)
"
DE-6-2^
DE-6S**^
DE-6-1WS^
DE-6-2^
DE-6S**^
DE-6-1WS^
Detroit Diesel 16V-92, 16V-92T, TA, TT, TTA
13
DE-6-2^
DE-6S**^
DE-6-1WS^
Hi Perf
(1/2-Full Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
DODGE (SEE CHRYSLER)
EAGLE (ALSO SEE AMC/CHRYSLER CORP)
4 cyl 89.6ci
"
97.5ci
1.5L
1.6L
1468cc 75.5mm
1597cc 76.9mm
1985-96
1978-89
MIA-3*
SOHC 8 valve Series A, K, P, Q, X, G15B, 4G15
Mitsubishi Eng. Eagle Premier
SOHC incl. turbo Series G32B, F, Z, 3 Mitsubishi Eng.
Eagle Premier
(Full Round)
MIA-1*
(1/2 Shell)
MIA-2*
(1/2 Shell)
"
122ci
2.0L
1997cc 85mm
1989-94
"
143.4ci
2.4L
2351cc 86.5mm
1989-98
SOHC 8 valve G63B (83-89), DOHC 16 valve 4G63
(90-94) Mitsubishi Eng. incl. turbo. Eagle Talon
(Balance shaft set)
SOHC 8 valve 4G64, G64B T Series Mitsubishi Eng.
Eagle Summit, Summit Wagon
MIG-3**
MIA-1*
(1/2 Shell)
MIA-2*
(Balance shaft set)
"
150ci
6 cyl 201ci
2.46L 2460cc 3.875
1988-89
AMC/Chrysler Eng. AMC Eagle Premier
3.3L
1990-99
OHV Chrysler V-6 Eng. AMC/Eagle Concorde,
Vision
3.661
MIG-3**
N-7
PD-28
PD-28B
FIAT
4cyl
818cc 64mm
1968-71
100GC3, 100GS3, 100G3
FT-1^
"
843cc 65mm
1964-70
100G Series including: 100GC, 100GS
FT-1^
"
903cc 65mm
1970-73
100GBC, 100GBS, 100GC.000, 100GL
FT-1^
1.2L
1197cc 73mm
1966-74
124A, 124A.000
FT-3^
1.4L
1438cc 80mm
1968-73
124AC, 124B OHV Eng.
FT-3^
105E, 106E, 107E Eng. includes British Ford Anglia,
Prefect, Fordson Truck
OHV 4 cyl incl. British & German Ford ( KSG Mfg )
Ford Cortina, Escort
OHV 4 cyl R2 Series Eng. British Ford
F-28
113E, 114E, 123E, 308E Eng. includes British Ford
Anglia, Cortina
2735E, 3014E, 711M Eng. includes British Ford
Capri, Cortina, Escort
OHV 4 cyl 109E, 123E, 124E Series Eng. includes
British Ford Capri, Classic
German V-4 12M, 15M, 17M Series Eng.
Ford Capri, Taunus
116E, 118M, 120E, 122E, 3017E, 3034E Series Eng.
includes British Ford Capri, Classic, Corsair, Cortina
Mazda Ford NA Series Eng. Ford Courier P.U.
F-28
"
"
87.8ci
FORD MOTOR CO.
4 cyl 60.9ci
"
67ci
1.0L
997cc 81mm
1959-68
1.1L
1098cc 3.188
1968-80
(81mm)
"
1.2L
1183cc 80mm
1962-72
"
73.1ci
1.2L
1198cc 81mm
1961-68
"
79.2ci
1.3L
1298cc 81mm
1966-82
"
82ci
1.3L
1340cc 81mm
1961-64
"
91.3ci
1.5L
1497cc 94mm
1959-72
"
91.5ci
1.5L
1498cc 81mm
1962-67
"
96.5ci
1.6L
1586cc 78mm
1970-77
14
F-28
F-28
F-28
F-28
F-42^
F-28
F-41
(1/2 Shell)
YEAR
Cyl
cu.in
L
cc.
OHC REPAIR
Bore
Standard
Hi Perf
(1/2-Full Shell)
FORD MOTOR CO. (CONT'D)
4 cyl 97ci
1.6L
1593cc 88mm
1970-84
OHC 4 cyl. Eng. includes British Ford Capri, Cortina,
Taunus
1.6L
1597cc 78mm
1987-94
"
97ci
"
97.6ci
1.6L
1598cc 81mm
1968-75
SOHC (8 valve) & DOHC (16 valve) B6-T, E, Z, ZE, 6,
7 Series Mazda Eng. Ford Passenger & Lt. Truck
OHV 4 cyl 711M, 2737E, 3036E Series Eng. includes
"
98ci
1.6L
1598cc 81mm
1978-80
OHV 4 cyl German Ford ( KSG Mfg ) Ford Fiesta
"
98ci
1.6L
1599cc 3.150
1981-85
(80mm)
"
104ci
1.7L
1699cc 90mm
1962-75
"
109.6ci
1.8L
1796cc 78mm
1969-78
"
112.2ci
1.8L
1839cc 83mm
1991-96
"
116ci
1.9L
3.226
1985-96
"
120.3ci
2.0L
1970cc 80mm
1979-80
"
121.5ci
2.0L
1991cc 83mm
1993-97
"
121.7ci
2.0L
1993cc 3.575
1971-74
"
122ci
2.0L
1998cc 86mm
1984-88
SOHC Ford Eng HS Series Eng. incl. turbo (84-85)
Ford Escort, EXP, LN7, Mercury Lnyx
German V-4 PS5 Series Eng. Ford Capri, Consul,
Taunus
Mazda Ford VB, VC Series Eng. Ford Courier P.U.
SOHC (16 valve) BP Series Mazda Eng. Ford
Escort, Tracer LTS & Lt. Truck
SOHC Ford J, 9 Series Eng. Ford Escort, EXP, Lynx,
Tracer
Mazda Ford MA, MB Series Eng. Ford Courier P.U.
SOHC 16 valve Mazda A, FS-DE Series Eng. Ford
Probe
OHV 4 cyl 2.0 X Series Eng. includes British Ford.
Ford Pinto 2000, Mercury Capri 2000
(Aux shaft set)
"
122ci
2.0L
3.516
1983-88
SOHC 8 valve Mazda Ford FE, FE-T Series Eng incl.
Turbo. Ford Escort, Tempo, Topaz
SOHC Ford 2.0 C Series Eng. Ford Ranger, Bronco II
(Special oil control set w O.D groove)
(Aux shaft set)
"
133ci
2.2L
2184cc 86mm
1989-92
"
140ci
2.3L
2300cc 3.680
1984-94
"
140ci
2.3L
2302cc 3.780
1974-97
SOHC 12 valve Mazda Ford F2, F2-T Series Eng. incl.
Turbo. Ford Probe
OHV HSC Eng. 2.3 R, S, X Series Eng. Ford Tempo,
Topaz
SOHC Ford 2.3 Series WB Eng incl. Turbo (83-88).
Ford-Mercury Capri, Fairmont, Granada, LTD, Marquis,
Merkur XR4Ti, Monarch, Mustang, T-Bird, XR7, Zephyr,
Aerostar, Courier, Ranger
(Aux shaft set)
"
143ci
2.3L
2346cc 91.1mm
1985-87
(Balance shaft set)
2.4L
3.500
1960-65
4 cyl 153ci
2.5L
3.680
1986-91
6 cyl 156ci
2.6L
2551cc 3.543
1970-76
FG-29**
MZA-1*
(Full Round)
F-28
F-28
FG-29**
FA-2*
(Full Round)
F-42^
F-41
MZA-1*
(Full Round)
FA-1*
(Full Round)
F-41
MZA-2*
(1/2 Shell)
F-29
FG-29**
MZA-2*
(1/2 Shell)
F-34
F-34B
F-34S
FG-34**
MZA-2*
(1/2 Shell)
F-46
F-34
F-34B
F-34S
FG-34**
SOHC Ford-Mitsubishi Turbo Diesel E Series Eng.
Ford Bronco II, Ranger
6 cyl 144ci
F-29
OHV Ford D, S Series Eng. Ford, Mercury: Comet,
Falcon, E-100, P-100 Truck/Van
OHV HSC Eng. 2.5 D, N, Series Eng. Ford, Mercury:
Sable, Taurus
German Ford V-6 Series U Eng.
15
MIG-2**
MIG-2-1R**
MIG-2E**
F-32
F-46
F-31
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
3 cyl 158ci
2.6L
2590cc 107mm
1965-72
6 cyl 170ci
2.8L
3.500
1961-72
"
170ci
2.8L
2792cc 3.661
1974-79
"
171ci
2.8L
2800cc 3.661
1983-87
European Gas, LPG & Diesel Series 32D, G, 158 Eng.
Dextra 2000. Wheel Tractor
OHV Ford U Series Eng. Ford, Mercury: Comet,
Fairlane, Falcon, Maverick, Meteor, Mustang, Ranchero,
Bronco, E-100-300, P-100-350 Truck/Van
OHV Ford V-6 Series Z Eng. incl. German built. Ford,
Mercury: Bobcat, Capri, Mustang, Pinto
OHV Ford V-6 Series S Eng. Ford Truck/Van:
Aerostar, Bronco II, Ranger
(Special oil control set)
(Connecting Bushing/Water Pump Jacket to Block, 2 reqd,
F-43
F-32
F-31
F-47
F-47B
FD-1-1
OE#D2RY6178B)
3 cyl 175ci
2.8L
4.200
1965-72
6 cyl 177ci
2.9L
2934cc 3.661
1986-92
3.0L
2960cc 3.430
1993-98
"
181ci
(87mm)
European Diesel 175D Series Eng. Dextra Super 3000.
Wheel Tractor
OHV Ford V-6 Series T, V Eng. Merkur Scorpio,
Ford Truck/Van: Bronco II, Ranger (Special oil control set)
F-43
F-47B
SOHC V-6 12 valve VG30E Ford-Nissan Eng.
Ford Truck & Van
NIA-3L*
(Cam brg set, left bank)
(Full Round)
NIA-3R*
(Cam brg set, right bank)
(Full Round)
"
183ci
3.0L
2999cc 3.503
1986-00
OHV Ford Vulcan V-6 Eng. Ford Probe, Taurus (exc.
SHO), Tempo, Topaz, Mercury Sable. Truck/Van:
Ranger
Ford Aerostar (I.D. groove # 4 pos.)
1965-72
European Gas & Diesel Series BSD332 Eng.
Major 4000. Tractor
OHV Ford B, T, X Series Eng. Ford, Mercury: Capri,
Comet, Cougar, Fairmont, Granada, LTD, Marquis,
Maverick, Mustang, XR7. Truck: Ranchero
European Gas & Diesel Series BSD333, 333H Eng.
Major 4000. Tractor
OHV Ford Eng. Ford Crestline, Custom, Mainline,
F100-350, P350
Flathead V-8 Eng. Ford Passenger Car & Truck
(89mm)
3 cyl 192ci
3.1L
6 cyl 200ci
3.3L
3 cyl 201ci
3.3L
6 cyl 215ci
3.5L
3.563
1952-53
8 cyl 221ci
3.6L
3.063
1936-48
221ci
3.6L
3.500
1962-68
OHV Ford V-8 Series L Eng. Ford, Mercury
Passenger Car & Truck
6 cyl 223ci
3.6L
3.625
1954-66
OHV Ford Series V, J Eng. Ford, Mercury Edsel,
Crestline, Custom, Fairlane, Galaxie, Ranchero
"
3146cc 112mm
3.682
3294cc 112mm
1963-83
1965-72
F-48
F-48A
F-43
F-32
F-43
F-7
F-1
F-18
FP-18 or
FP-18T
(Coated)
(Engs. w cross drilled camshaft journals)
(Engs. w/o cross drilled camshaft journals)
"
232ci
3.8L
3.811
1988-00
(96.8mm)
OHV Ford V-6 Series C, R, 3, 4, incl. supercharged
Eng. Mustang, Taurus, T-Bird, Continental, Windstar,
Mercury Sable, Passenger Car & Light Truck
(Aux shaft set)
(Cam brgs + Aux shaft set kit)
"
232ci
3.8L
3.811
1982-87
OHV Ford 3.8L V-6 Eng. See applications above
1965-72
European Gas & Diesel Series 56G Eng.
Major, Super Major 5000
F-22
F-7
F-52
FG-51**
F-38
F-45
(96.8mm)
4 cyl 233ci
3.8L
3819cc 107mm
16
F-44
YEAR
Cyl
cu.in
L
cc.
OHC REPAIR
Bore
Standard
Hi Perf
(1/2-Full Shell)
8 cyl 239ci
3.9L
3.500
1954-55
OHV V-8. Ford Passenger Car & F100-800 Truck
(Cam w/grooved #3 journal)
(Cam w/cross-drilled #3 journal)
"
239ci
3.9L
3.188
1938-54
Flathead, L-Head V-8 Eng. Ford Crestline, Custom,
Deluxe, Mainline, Meteor, F100-250, 01-998 Series
OHV Ford Series A,B, E, J, 1 Eng. Ford, Mercury
Custom, Galaxie, Meteor. Truck/Van: E100-300, F100750, P100-350
6 cyl 240ci
3.9L
4.000
1965-75
4.0L
4015cc 3.952
1990-99
OHV Ford V-6 Series X Eng. Ford Truck/Van:
Aerostar, Bronco II, Explorer, Ranger
1997-99
SOHC Ford V-6 Series E Eng. Ford Explorer, Mercury
Mountaineer
"
244ci
(100mm)
(Cam brg set w special wide #4 brg)
"
244ci
4.0L
4015cc 3.952
(100mm)
(Aux shaft set)
(Balance shaft drive gear bushing)
"
250ci
4.1L
3.680
1969-80
8 cyl 255ci
4.2L
3.680
1980-82
"
255ci
4.2L
3.188
4 cyl 256ci
4.2L
6 cyl 256ci
4.2L
3.810
1997-99
8 cyl 256ci
4.2L
3.625
1954-55
4195cc 112mm
1948-54
1968-81
OHV Ford Series C, L Eng. Ford, Mercury Fairlane,
Falcon, Mustang, Torino, Comet, Monarch, Montego,
Lt. Truck
OHV Ford V-8 Series D Eng. Ford, Mercury Capri,
Cougar, Cr. Victoria, Custom, Fairmont, Granada, LTD,
Marquis, Monarch, Mustang, T-Bird, XR7, Zephyr
Ford Truck/Van: Bronco, E100-350, F100-350
Flathead, L-Head V-8 Eng. U.S. & Canadian. Ford &
Mercury (Meteor) Passenger car & Truck
European Gas & Diesel Series Eng. Major, Super
Major 5000
OHV FORD V-6 Series 2 Eng. Ford Truck/Van: E150,
F150
F-23A
F-23B
F-50
F-50A
FG-53**
FG-1-1**
F-32
F-18
FP-18 or
FP-18T
(Coated)
F-1
F-44
F-52
FG-51**
OHV Ford V-8 Series P, U Eng. Ford, Mercury
(Meteor) Passenger car & Truck (100-900 Series)
"
F-9A
F-9B
F-1
260ci
4.3L
3.800
1962-66
OHV Ford V-8 Series F Eng. Ford, Mercury Comet,
Fairlane, Falcon, Galaxie, Meteor, Mustang, Ranchero
6 cyl 262ci
4.3L
3.719
1961-64
OHV Ford Series B Eng. Ford Truck F100-700
F-9A
F-9B
F-18
FP-18 or
FP-18T
(Coated)
(Engs w cross drilled camshaft journals)
(Engs w/o cross drilled camshaft journals)
8 cyl 272ci
4.4L
3.625
1955-66
OHV Ford V-8 Series U Eng. Ford, Mercury Custom,
Fairlane, Ranchero, T-Bird Ford Truck F100-700
"
281ci
4.6L
4605cc 3.551
1991-99
(90.2mm)
"
281ci
4.6L
4605cc 3.551
1993-96
(90.2mm)
"
281ci
4.6L
4605cc 3.551
(90.2mm)
1996-00
F-22
F-7
SOHC 16 valve FORD V-8 Modular Triton Eng.
Ford Cr. Victoria, T-Bird, Lincoln Town Car, Mercury
Cougar, Gr. Marquis, XR7. Ford Truck/Van: E150,
F150-250, Expedition (1 cam set per cyl. head reqd)
DOHC 32 valve FORD V-8 Modular Triton Eng.
Lincoln Continental, Mk VIII (1 cam set per cyl. head reqd)
DOHC 32 valve FORD V-8 Modular Triton Eng.
Ford, Lincoln Passenger Cars. Continental, Mk VIII.
Ford Truck (1 cam set per cyl. head reqd)
17
F-9A
F-9B
FA-3*
(1/2 Shell)
FA-4*
(1/2 Shell)
FA-5*
(1/2 Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
F-18
FP-18 or
FP-18T
(1/2-Full Shell)
8 cyl 289ci
"
292ci
4.7L
4.000
1963-68
4.8L
3.750
1955-66
OHV Ford V-8 Eng. Ford, Mercury Passenger Cars
incl. Cougar, Falcon, LTD, Mustang, Ranchero
Ford Truck: Bronco
OHV Ford V-8 Eng. Ford, Mercury Passenger Cars
incl. Fairlane, T-Bird, Meteor. Ford Truck: Ranger,
F100-350, P350-800
6 cyl 300ci
4.9L
4.000
1965-6/85 OHV Ford Series B, C, E Eng. Ford Truck/Van: E100-700
350, F100-350, P100, 350, HD Series 400-750
300ci
4.9L
4.000
6/85-97
OHV Ford Series Y Eng. Ford Truck/Van: E150-350,
F150-350, HD Series 700, 750
8 cyl 302ci
5.0L
4.000
1968-99
OHV Ford V-8 Vin Series D, E, F, G, J, M, P, Y Eng.
Ford, Lincoln, Mercury Pass. Cars incl. Boss, Cougar,
Cr. Victoria, Falcon, Galaxie, LTD, Mark series, Marquis,
Mustang, Ranchero, Shelby, T-Bird, Town Car, XR7
Ford Truck/Van: Bronco, E100-350, F100-350
302 V-8 SVO Block for S302 performance
blocks w 2.204 cam hsgs. Ford incl. Mustang, Cobra,
and HP. (Replaces Ford Motorsport # 6261R3512)
"
"
302ci
SVO
5.0L
4.000
(Coated)
F-9A
F-9B
F-23A
F-23B
F-49
F-49B
F-18
(Coated)
351-HP or
351-HPT
(Coated)
351HP-R1
351RHP
HP Cam brg set for above w +.010 oversize O.D.
HP Cam brg set for R302 block w 2.204 cam hsgs.
"
302ci
5.0L
3.625
1956-63
"
312ci
5.1L
3.800
1956-60
"
330ci
5.4L
3.551
1997-01
(90.2mm)
"
330ci
5.4L
3.875
1964-78
"
332ci
5.4L
3.800
1956-64
"
332ci
5.4L
4.000
1958-59
"
351ci
5.8L
4.000
1969-98
"
351ci
5.8L
4.000
1970-82
OHV Ford V-8 Eng. Ford Truck: MD-HD Series 700900
OHV V-8 Eng, U.S. & Canadian. Ford, Mercury T-Bird,
Custom, Fairlane, Meteor (Cam w/grooved #3 journal)
SOHC 16 valve FORD V-8 Modular Triton Eng.
Ford, Lincoln Mercury Passenger Cars. Ford Truck &
SUV (1 cam set per cyl. head reqd)
OHV Ford V-8 Eng. Ford Truck/Van: MD-HD Series
500-900
FP-18 or
FP-18T
F-12
F-9A
FA-5*
(1/2 Shell)
F-33
FP-33 or
FP-33T
(Coated)
OHV Ford V-8 Eng. Ford Truck: MD-HD Series 700900. Industrial, Tractor
OHV Ford Series B, G Eng. Ford, Mercury Corsair,
Custom, Fairlane, T-Bird
F-12
F-33
FP-33 or
FP-33T
F-18
FP-18 or
FP-18T
F-26
FP-26 or
FP-26T
(Coated)
"
"
351ci
352ci
5.8L
5.8L
4.000
4.000
1958-67
351W - Windsor Eng. Vin Series C, G, H, M, W
Ford, Lincoln, Mercury Passenger Cars & Ford
Truck/Van: Bronco, E100-350, F100-350
351M - Modified Eng. Vin Series G, H, (75-82).
351C, CJ - Cleveland Eng Vin Series H (70-74).
Ford, Lincoln, Mercury Pass. Cars & Ford Truck/Van
(Modified Engs only): Bronco, E100-350, F100-350
351 V-8 SVO Block for S351, V351, W351,
R352 performance blocks w 2.204 cam hsgs.
Ford incl. Mustang, Cobra. Replaces Ford Motorsport
# 6261R3512 (HP Cam brg set for above w +.010 oversize O.D.)
HP Cam brg set for R351 block w 2.204 cam hsgs.
OHV Ford V-8 Series D, H, R Eng. Ford, Mercury
Custom, Fairlane, Galaxie, LTD, Meteor, Monterey,
Ranchero, T-Bird. Ford Truck/Van: F100-500, P350
18
(Coated)
(Coated)
351-HP or
351-HPT
(Coated)
F-33
351HP-R1
351RHP
FP-33 or
FP-33T
(Coated)
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
FP-33 or
FP-33T
8 cyl 359ci
5.9L
4.050
1973-78
OHV Ford V-8 Eng. Ford MD & HD Truck/Van: 600800 Series
F-33
6 cyl 359ci
5.9L
4.016
1993
CU-12
8 cyl 360ci
5.9L
4.050
1968-76
B, 6B Series Cummins Diesel & Turbo-Diesel
Ford Truck FD1060 Series
OHV Ford V-8 Eng. Ford LD & MD Truck/Van: F100350, 450-500 HD Series
F-33
FP-33 or
FP-33T
FP-33 or
FP-33T
(Coated)
(Coated)
"
361ci
5.9L
4.050
1958-79
OHV Ford V-8 Eng. Ford, Mercury Passenger Cars &
MD, HD Truck/Van: F500-800
F-33
"
368ci
6.0L
4.000
1956-57
F-11
"
370ci
6.1L
4.050
1979-92
OHV Ford V-8 Eng. Ford, Lincoln, Mercury Capri,
Continental, Premiere, Turnpike
(Coated)
F-30
FP-30 or
FP-30T
(Coated)
FORD cam brg set above w +.005 oversized O.D.
FP-30R
FP-33 or
FP-33T
"
389ci
6.4L
4.050
1973-78
F-33
"
390ci
6.4L
4.050
1961-76
F-33
FP-33 or
FP-33T
"
391ci
6.4L
4.050
1964-78
OHV Ford V-8 Series G-Z Eng. Ford, Lincoln, Mercury
Passenger Cars incl. Fairlane, LTD, Mustang, Marquis,
Ranchero, T-Bird. Ford Truck/Van: F100-500
F-33
FP-33 or
FP-33T
"
400ci
6.6L
4.000
1971-82
F-26
FP-26 or
FP-26T
6 cyl 401ci
6.6L
4.400
1987-95
8 cyl 401ci
6.6L
4.125
1958-76
OHV Ford V-8 Series S, Z Eng. Ford, Lincoln, Mercury
Passenger Cars incl. Continental, LTD, Marquis, Mark V,
Ranchero, T-Bird. Truck/Van: E100-350, F100-500
Gas & Diesel Series (Brazil) 401D, 401DF, T, 401TD
Major 8000-9600, TW10-30 Tractor & Industrial
CF600, 800, 8000
OHV Ford V-8 Eng. Ford HD Truck/Van: 750-1100
Series
OHV Ford V-8 Series B, G Eng. Ford, Mercury
Galaxy, Monterey
F-33
FP-33 or
FP-33T
OHV Ford V-8 Series M Eng. Ford, Mercury:
Brougham, Marauder, Marquis, Montclair, Monterey,
Parklane
IHC-Navistar Diesel Ford Vin Series 1 Eng. Ford
Truck/Van: E150-350, F150-350
F-33
FP-33 or
FP-33T
(Coated)
(Coated)
(Coated)
"
406ci
6.6L
4.130
1962-63
"
410ci
6.7L
4.050
1966-67
"
420ci
6.9L
4.000
1982-87
"
427ci
7.0L
4.230
1966-68
"
427ci
7.0L
4.230
1963-65
"
428ci
7.0L
4.130
1966-75
"
429ci
7.0L
4.360
1968-95
(Coated)
F-44
F-16
(Coated)
OHV Ford V-8 Eng. (Side Oiler/Wedge-head eng).
Ford, Mercury Passenger Cars & Hi Perf.
OHV Ford V-8 Eng.
(Coated)
IN-17
IN-17R2
F-24
F-33
FP-33 or
FP-33T
OHV Ford V-8 Vin Series P, Q, R Eng.
F-33
FP-33 or
FP-33T
OHV Ford V-8 Vin Series J - R Eng. Ford, Mercury
Passenger Cars & Hi Perf. Ford HD Truck: 600-900
Series
F-30
FP-30 or
FP-30T
(Coated)
(Coated)
(FORD cam brg set above w +.005 oversized O.D.)
19
(Coated)
FP-30R
(1/2-Full Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
OHC REPAIR
Bore
Standard
Hi Perf
8 cyl 430ci
7.0L
4.300
1961-65
"
445ci
7.3L
4.110
1988-02
"
460ci
7.5L
4.360
1968-98
OHV Ford V-8 Vin Series A, H, J, K, L Eng. Ford,
Mercury, Lincoln Capri, Continental, Edsel, Mark II,
Monterey, Parklane, T-Bird
IHC-Navistar 7.3 Diesel Eng. incl. Turbo-Diesel (94-00)
Direct Injection and I.D.I. Series F, K, M, 1.
Ford Truck/Van: E150-350, F150-350, F (Super Duty)
OHV Ford V-8 Vin Series A, C, G, J, L Eng. Ford,
Mercury, Lincoln incl. Continental, Cougar, Galaxie
LTD, Mark Series, Marquis, Monterey, T-Bird, Torino
Ford Truck/Van: E250-350, F100-500, F (Super Duty)
F-19
IN-17
IN-17R2
F-30
(Coated)
FP-30R
FORD cam brg set above w +.005 oversized O.D.
"
462ci
7.6L
4.380
6 cyl 464ci
7.6L
4.438
474ci
7.8L
4.400
1987-97
8 cyl 475ci
7.8L
4.500
1972-79
"
1966-68
"
477ci
7.8L
4.500
1958-81
"
500ci
8.2L
4.252
1980-85
"
522ci
8.5L
4.500
1968-75
6 cyl 525ci
8.6L
4.500
1965-69
OHV Ford V-8 Vin Series G, 7 Eng. Lincoln
Continental
Cummins Diesel & Turbo Diesel GNH 180, C160-C240,
C, CS, CT 464 Series. Ford CF160, C160, C180
(Supercharged) Series Eng. Ford MD-HD Trucks
Turbo-Diesel Series (Brazil) 401TD, 401DFT.
BSD666HT Tractor & Industrial, CF600, 800
OHV Ford V-8 Eng. HD Ford Truck: 750-1000 Series
OHV Ford V-8 Eng. HD Ford Truck: 750-1000 Series,
477GF Power Unit
Detroit Diesel OHV Fuel Pincher Diesel and TurboDiesel 8.2, 8.2N, 8.2T Series. Ford MD-HD Truck, Ind.
Caterpillar 1140, 1145, 3145 Diesel Eng. Ford Truck &
Industrial V150-200, 1140, 1145,1150 Series
Caterpillar D333, D333A, G333, 1673 Turbo-Diesel Eng.
HD Ford Truck & Industrial
F-19
CU-5A
F-44
F-16
F-16
DE-4
CAT-2
Cam Bearings:
Position #1 OE#9M5744
Position #2-5 OE#7M4046
CAT-2-1
CAT-2-2
Balance Shaft Brgs:
Position #1, 2, 5, 6 OE#9M5239
8 cyl 534ci
8.8L
4.500
1958-81
555ci
9.1L
4.625
1973-79
6 cyl 573ci
9.4L
4.500
1968-75
8 cyl 636ci
10.4L
4.500
1968-72
6 cyl 638ci
10.5L
4.750
1988-89
"
OHV Ford V-8 Eng. HD Ford Truck: 750-1100 Series,
534GF Power Unit
V555 & VT555 Cummins Diesel. (Brgs listed for engines
with 2.186 housing bore only.) Ford MD-HD Truck, Ind.
Caterpillar 1150, 3150 Diesel Eng. Ford MD-HD Truck
& Industrial incl. V200, 1150
Caterpillar 1160,3160,3208 (early & late) V-8 Diesel.
Ford MD-HD Truck, Ind: V150,V175,V 195, V200,V225
Caterpillar D333, D334, 1673, 1674, 3306 Turbo-Diesel
Ford HD Truck, Ind. Eng. 3306B
CAT-2-5**
CAT-2-6**
F-16
CU-11
CAT-2
CAT-2
Cam Bearings:
Position #1 OE#9M5744
Position #2-5
OE#7M4046
CAT-2-1
CAT-2-2
Balance Shaft Brgs:
Position #1, 2, 5, 6 OE#5S6419
"
672ci
11.0L
4.875
1964-65
Cummins NH180, NH195, NHD180, NHH180, NHH195,
NHH220. H, HR, HS, N, NH 672 small cam series
Ford HD Truck, Ind. Eng. N672
20
FP-30 or
FP-30T
CAT-2-3**
CAT-2-4**
CU-5A
(1/2-Full Shell)
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
6 cyl 743ci
12.2L
5.125
1964-69
"
855ci
14.0L
5.500
1964-72
"
855ci
14.0L
5.500
1964-78
"
893ci
14.6L
5.400
1976-81
Cummins NHE180, NHE195, NH220 small cam series.
Ford MD-HD Truck & Ind. Eng.
Cummins Diesel Formula 290, 315, 350 Series;
NHC 250, NH 230 small cam series. Ford HD Truck &
Ind.
Cummins Turbo-Diesel 2 1/2 inch big cam series 3/32"
wall (70-78), Ford HD Truck & Ind.
Caterpillar 1693, 3406, 3406B, 3406C, 3406E TurboDiesel & LPG. Ford HD Truck & Ind. 3406 applications
Position #1, OE#4N0685
Position #2-7, OE#4N6658
"
927ci
15.2L
5.500
1974-83
OHV Cummins Super 250, M927 Diesel Eng.
Ford HD Truck & Ind. 3406 applications
CU-5A
CU-5A
CU-9
CAT-4-1
CAT-4-2
CU-5A
FORD MOTOR CO (BRITISH-GERMAN) - SEE FORD MOTOR CO.
FORD TRACTOR (ALSO SEE FORD MOTOR CO.)
3 cyl 158ci
2.6L
2590cc 4.203
"
240ci
3.9L
102mm
158 Gas, LPG & Diesel Eng. DEXTRA 2000, Ford
Force 2000-3550, Super Dextra 3000, 233-445, 20003550 Series Tractor, Fordson Tractor
1965-90 175 Gas, LPG & Diesel Eng., DEXTRA 2000, Ford
Force 2000-3000, Super Dextra 3000, 233-420, 20003900 Series Tractor, Fordson Tractor
1965-90 183 Diesel Eng. 420 Loader, 3000-4100 Series
Tractor, Fordson Tractor
1965-5/69 192 Gas, LPG & Diesel Eng. Force 4000, Major 4000,
4000, 4500 Series Tractor, Fordson Tractor
1965-81 201 Gas, LPG & Diesel. Ford Force 4000, Major 4000,
431-555, 4000-4600 Series Tractor, Fordson Tractor
1961-66 223 (L6) LPG & Gas Eng. Commander 6000 Tractor,
17-1 Combine, 60000 Tractor
1965-72 233 Gas, LPG & Diesel Eng. Ford Force 5000, Super
Major 5000, 620-750, 5000-5700 Series Tractor,
Fordson Tractor
1965-69 Dorset Diesel Eng. Ford Tractor
"
242ci
4.0L
105mm
1961-69
Dorset Diesel Eng. Ford Tractor
6 cyl 242ci
4.0L
3.625
1961-66
4 cyl 254ci
4.2L
4.203
1969-90
Ford Diesel (L6) Eng. 17-1 Combine, 6000, 60000
Series Tractor
(107mm)
"
175ci
2.8L
4.200
"
183ci
3.0L
2999cc 4.203
"
192ci
3.1L
3146cc 4.406
(112mm)
"
201ci
3.3L
3294cc 4.406
(112mm)
6 cyl 223 ci
3.6L
3.625
4 cyl 233ci
3.8L
3819cc 4.203
(107mm)
1965-90
F-43
F-43
F-43
F-43
F-43
F-7
F-44
F-53^
F-53^
F-7
F-53^
(107mm)
"
256ci
4.2L
4195cc 4.406
6 cyl 360ci
5.9L
102mm
1968-90
F-44
1965-90
256 Gas, Diesel & Turbo-Diesel. Ford Force 5000,
Major 7000, Super Major 5000, 620-750 Combine,
5000-7700 Series Tractor, Fordson Tractor
F-54^
"
362ci
5.9L
105mm
1965-90
F-54^
"
363ci
5.9L
5945cc 105mm
1965-90
Dorset Turbo-Diesel. Ford Tractor
F-54^
"
380ci
6.2L
6227cc 107.2mm 1969-90
F-54^
21
Hi Perf
(1/2-Full Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
FORD TRACTOR (CONT'D)
6 cyl 401ci
"
474ci
6.6L
4.406
1969-90
7.8L
4.400
1987-95
401Ford Diesel &Turbo-Diesel Eng. County Super 6,
Major 8000-9000, TW10-30, 7840-9700 Series Tractor,
Fordson Tractor
Turbo-Diesel Series (Brazil) 401TD, 401DFT.
BSD666HT Tractor & Industrial, CF600, 800
F-44
F-44
GENERAL MOTORS includes Truck (CHEVROLET, GMC, OLDSMOBILE, PONTIAC)
and Passenger Cars including (BUICK, CADILLAC, CHEVROLET, GEO, OLDSMOBILE,
PONTIAC, & SATURN)
4 cyl 80.8ci
1.3L
1324cc 2.913
1992-00
(74mm)
"
89.7ci
1.5L
1471cc 3.033
1985-89
(77mm)
"
110.8ci
1.8L
1817cc 3.307
1972-82
(84mm)
SOHC Suzuki G13A, B, K Eng. 1.3L Type 9 Chevrolet
& Geo Metro Passenger Cars
SOHC Isuzu 4XC1, G150 Type K, 7 Eng incl. 9 - Turbo.
Chevrolet Spectrum, Geo Spectrum, Pontiac Sunburst
(Aux shaft set)
SOHC Isuzu G180Z, N Eng. Series 1 to 4. Chevrolet
LUV Truck
SA-1*
(Full Round)
CHG-14**
MIA-1*
(1/2 Shell)
MIA-2*
(1/2 Shell)
(Aux/Balance shaft set for years 1972-75)
"
110.8ci
1.8L
1817cc 3.307
"
112ci
1.8L
1835cc 3.504
1981-86
(84mm)
1981-82
(89mm)
"
116ci
1.9L
1901cc 3.230
1991-99
"
116ci
1.9L
1901cc 3.230
1991-00
"
119ci
1.9L
1949cc 87mm
1982-86
SOHC Isuzu Diesel 4FB1 Eng. Series 1 to 4.
Chevrolet Chevette, Olds Acadian, Pontiac T1000
OHV Vin Type G (Cast Iron) Chevrolet Eng. Buick
Skyhawk; Cadillac Cimarron; Chevrolet Cavalier; Olds
Firenza; Pontiac J2000, Sunbird
SOHC Vin Type 9 Saturn LKO Eng. Saturn SC, SL, SW
Passenger Cars
DOHC 16 valve Vin Type 7, 8 Saturn LKO Eng. Saturn
SC, SL, SW Passenger Cars
SOHC Isuzu Type A Eng. Chevrolet S-10 Truck.
CHG-14**
IZ-1^
CH-19
GMA-1*
(Full Round)
GMA-2*^
(1/2 Shell)
MIA-1*
(1/2 Shell)
MIA-2*
"
121ci
2.0L
1994cc 3.504
1983-89
(89mm)
"
122ci
2.0L
"
134ci
2.2L
3.500
1975-77
3.504
1990-00
(89mm)
"
136ci
2.2L
2238cc 88mm
1981-82
1983-85
"
140ci
2.3L
3.500
1971-77
"
151ci
2.5L
4.000
1977-91
1985-93
OHV Type Y (83-84), N Chevrolet Eng. Chevrolet
S-10, S-10 Blazer, GMC S-15, S15 Jimmy
OHV Type B, P (83-86) & Type 1 (87-89) Chevrolet
Eng. Buick Skyhawk; Cad. Cimarron; Chev Beretta,
Cavalier, Corsica; Olds Firenza; Pontiac J-2000,
Sunbird
DOHC Chevrolet Cosworth Type O Eng. Chevrolet
Vega
OHV Type G, 4 Chevrolet Eng. Buick Century,
Skyhawk; Chev Beretta, Cavalier, Corsica, Lumina;
Olds Cutlass Cierra; Pontiac Sunfire, Tempest
OHV Type C223 Isuzu Diesel. Chevrolet, GMC Truck
OHV Type C233 Isuzu Diesel. S-10 Chevrolet; S-15
GMC Truck
SOHC Type A, B Chevrolet Eng. Chev Monza, Vega,
Olds Starfire, Pontiac Astre, Sunbird
OHV Pontiac Type R, 2 Engs. Buick, Chevrolet, Olds,
Pontiac Passenger Cars
OHV Pontiac Type A, E Engs. Chevrolet/GMC Truck:
S-10, GMC S-15
22
CHG-14**
CH-19
CH-13
CH-19
IZ-2^
IZ-3^
CH-13
CH-16
(1/2 Shell)
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
GENERAL MOTORS (CONT'D)
4 cyl 151ci
2.5L
4.000
1985-91
153ci
2.5L
3.875
1962-70
6 cyl 173ci
2.8L
2835cc 3.504
1980-93
"
(89mm)
OHV Pontiac Type U Eng. GM A, N, J, X body vehicles
incl. Century, Celebrity, Camaro, Citation, Astre, Fiero,
Grand Am, 6000, Lumina
OHV Chevrolet Eng. (U.S. & Canadian mfg.) Chevy II,
Nova, Chevrolet/GMC Truck & Van: 10, 1000, 1500
Series
OHV Chevrolet V-6 Type LL2 Eng. GM A, N, J, X body
incl. Century, Celebrity, Camaro, Citation, Astre, Fiero,
6000, Lumina. Chev/GMC Truck & Van: Blazer, S-10,
Jimmy, S-15, Sonoma
(Special brg set w wide #2 & 3 pos.)
4 cyl 181ci
3.0L
4.000
1982
OHV GM Eng. (Marine & Industrial)
6 cyl 181ci
3.0L
3.800
1985-89
OHV Buick V-6 Type L w/ 20 bolt oil pan. Buick Regal,
Century, Park Ave., Skylark; Olds Calais, Delta 88, 98,
Regency; Pontiac Grand Am
BUICK V-6 Type E w/ 14 bolt oil pan. Buick Century;
Olds Cutlass
"
181ci
3.0L
3.800
1982-85
"
189ci
3.1L
3.504
1988-98
OHV Chev V-6 incl. Types D, M, T, W (88-95), Type V
incl. Turbo (89-90). Buick, Chevrolet, Olds, Pontiac
Passenger Cars
(Oil control set w opt. groove design, #1 pos)
(89mm)
"
194ci
3.2L
3.563
1962-67
4 cyl 195ci
3.2L
4.063
1963
OHV Chevrolet 6 Cyl. Eng (U.S. & Canadian mfg.)
Chevrolet Chevelle, Chevy II, Malibu, Nova, El Camino
Chevrolet/GMC Truck & Van: 10, 20, 1000, 1500, 2500
Series
OHV Pontiac Eng. Pontiac LeMans, Tempest
195ci
3.2L
4.063
1961-62
OHV Pontiac Eng. Pontiac LeMans, Tempest
6 cyl 196ci
3.2L
3.500
1978-79
OHV Buick V-6 Eng. Buick Century, Regal; Chevrolet
Monza
CH-20
CH-6
CH-18
CH-18A
CH-16
B-13
BP-13 or
BP-13T
(Coated)
B-12
B-12B
CH-18
CH-18A
CH-7
P-4
PP-4 or
PP-4T
P-3
PP-3 or
PP-3T
(Coated)
"
(Coated)
(Oil control set w opt. groove design, #1 pos)
B-12
B-12B
B-6
"
198ci
3.2L
3.625
1962-64
OHV Buick V-6 Eng. Buick Skylark, Special
"
200ci
3.3L
3.500
1978-79
OHV Chevrolet V-6 Type M Eng. Chevrolet Chevelle,
El Camino, Impala, Malibu, Monte Carlo; GMC Caballero
CH-17
CHP-17 or
CHP-17T
"
204ci
3.3L
3.700
1989-93
OHV Buick V-6 Type N Eng (MFI). Buick Century,
Skylark; Olds Achieva, Calais, Cierra; Pontiac Grand Am
B-13
BP-13 or
BP-13T
"
207ci
3.4L
3.622
1991-97
DOHC 24 valve Chevrolet V-6 Type X Eng, casting
#10127450. Chev Lumina & Mini-Van, Monte Carlo,
Venture
1993-99
OHV Chevrolet V-6 Type E, S Eng.
Chevrolet Camaro, Monte Carlo; Pontiac Firebird
(Coated)
(Coated)
(92mm)
(Cam brg/Intermediate set w wide #1 pos.)
"
207ci
3.4L
3.622
(92mm)
"
215ci
3.5L
3.750
1964-65
OHV 6 Cyl. Pontiac Eng. Pontiac LeMans, Tempest
8 cyl 215ci
3.5L
3.500
1961-63
OHV Buick V-8 Eng. Buick Skylark, Special; Olds F-85
23
CHG-22**
CH-18
CH-18A
CH-7
B-11
(1/2-Full Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
6 cyl 216ci
3.5L
1940-47
3.750
1964-67
OHV Buick V-6 Eng. Buick Skylark, Special; Olds F-85
3.7L
3.563
1939-59
OHV GMC Eng. GMC Truck 100-300 Series
229ci
3.8L
3.736
1980-84
CH-17
"
230ci
3.8L
3.875
1962-70
"
230ci
3.8L
3.875
1962-70
OHV Chevrolet V-6 Type K, 9 Eng. Chev Camaro,
Caprice, Chevelle; Pontiac Grand Am, Grand Prix, Le
Mans, Safari; GMC Caballero; Chev El Camino
OHV Chevrolet Eng. Chevrolet Passenger Cars, Truck
& Van incl. GMC: 10-3500 Series
OHV Chevrolet Eng., Mexican Mfg. See appl. above
"
231ci
3.8L
3.800
1995-00
B-14
"
231ci
3.8L
3.800
1985-95
OHV Buick 3800 Series II Vin Type K Eng.
Buick, Chevrolet, Oldsmobile,
Pontiac Passenger Cars & Van
OHV Buick 3800 Series I Type C, E, K, L w/ 20 bolt oil
pan, supercharged 3800 MFI, 3800 TPI. Buick, Chev.,
Olds., Pontiac Passenger Cars, Chevrolet/GMC Lt.
Truck & Van
OHV Buick V-6 Type A, C, G, 2, 3, 8, 9 w/ 14 bolt oil
pan. Buick, Chevrolet, Olds., Pontiac Passenger Cars,
Chevrolet/GMC Lt. Truck & Van
224ci
3.7L
"
225ci
3.7L
"
228ci
"
1937-53
CH-2
OHV Chevrolet Eng. Chevrolet Passenger Cars,
Truck & Van: 10-98 Series
Chevrolet Eng.
"
3.500
CH-2
B-6
CH-2
(Coated)
CH-7
CH-11
B-13
B-12
231ci
3.8L
3.800
1975-87
"
235ci
3.8L
3.563
1954-63
"
235ci
3.8L
3.563
1940-54
"
236ci
3.9L
3.625
1941-46
OHV Chevrolet Eng w large dia brg. Chevrolet BelAir,
Biscayne, Corvette, Impala. Chevrolet Truck/Van: 1098 Series
OHV Chevrolet Eng w small dia brg.to early 54.
Chevrolet Passenger Cars, Chevrolet Truck/Van 10-98
Series
OHV Eng. GMC Truck 300-350 Series
"
248ci
4.1L
3.719
1939-55
OHV Eng. GMC Truck 96-470 Series
CH-2
"
250ci
4.1L
3.875
1966-70
CH-7
"
250ci
4.1L
3.875
1970-84
8 cyl 252ci
4.1L
4097cc 3.464
1982-88
OHV Chevrolet Eng. Buick, Chevrolet, Olds., Pontiac
Passenger Cars. Chevrolet/GMC Lt. Truck & Van:
10-5500 Series
OHV Chevrolet Eng. (incl. Mexico). Buick, Chevrolet,
Olds., Pontiac Passenger Cars. Chevrolet/GMC Lt.
Truck & Van: 10-5500 Series
OHV 4100 V-8 Cadillac Vin Type 7, 8 Eng. Buick,
Cadillac, Olds, Pontiac Luxury Cars
(88mm)
(Special set w wide #5 position )
6 cyl 252ci
4.1L
3.965
1980-85
OHV Buick V-6 Type 4 w/ 14 bolt oil pan. Buick, Cadillac, Olds, Pontiac Luxury Cars
256ci
4.2L
3.781
1940-46
OHV Eng. GMC Truck
8 cyl 260ci
4.3L
3.500
1975-76
4.3L
3.500
1977-85
OHV Olds V-8 Type F Eng. Buick Apollo, Skylark;
Olds 88, Cutlass, Cruiser, Omega; Pontiac LeMans,
Ventura
OHV Olds V-8 Type F, 8 Gas Eng. and Type P Diesel
(79 only). Buick, Chev, Olds., Pontiac Passenger Cars
"
"
260ci
24
BP-13 or
BP-13T
(Coated)
"
CHP-17 or
CHP-17T
B-12B
CH-3
CH-2
CH-2
CH-11
C-4
C-4A
B-12
B-12B
CH-2
O-6
O-7
(1/2-Full Shell)
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
6 cyl 261ci
4.3L
3.750
1953-54
3.750
1954-62
4.057
1982-85
"
261ci
4.3L
"
262ci
4.3L
(103mm)
"
262ci
4.3L
4.000
1985-99
OHV Chevrolet Eng. (thru early 54 w/ small dia brgs)
Chevrolet/GMC Truck & Van: 50, 60 Series
OHV Chevrolet Eng. U.S. & Canadian mfg (late 54 on
w/ large dia brgs), same applications above
OHV Olds V-6 Type T, V Diesel Eng. Buick, Cadillac,
Chev, Olds, Pontiac Passenger Cars
OHV Chevrolet V-6 LB4, LF6-Hi Output Type B, N, W,
X, Z (except T Series), incl H.O., Turbo (91-93) Eng.
Chev/GMC Truck & Van: S-10, Blazer, Jimmy, Safari,
Sierra, El Camino, 10-3500 Series
(For 92-2000 Vin X, W, Z Aux/Bal shaft-rear brg)
"
262ci
4.3L
4.000
1992-98
8 cyl 262ci
4.3L
3.671
1975-76
OHV Chevrolet V-6 LB4, LF6-Hi Output Type T Eng.,
(I.D.# starting w "T" located on front of block). Same
applications above
OHV Chevrolet V-8 Type G Eng. Chevrolet Monza,
Nova
Options:
CHEVROLET above w +.010 o'size, 2.030 hsg, .0795 wall
CH-2
CH-3
O-8
CH-17
CHP-17 or
CHP-17T
(Coated)
CHG-15**
CH-21
CH-8
CHP-8 or
CHP-8T
(Coated)
CH-4A
CHP-8R1
CHP-8R2
CHP-8R3
CHP-8R4
CHEVROLET above w +.010 OD, 2.030 hsg
"
265ci
4.3L
3.736
1994-96
OHV Chevrolet V-8 Type W Eng. Chevrolet Caprice.
Optional brgs, see above under V-8 262ci
CH-8
CHP-8 or
CHP-8T
"
265ci
4.3L
3.750
1955-57
CH-4
CHP-4 or
CHP-4T
"
265ci
4.3L
3.750
1980-81
P-4
PP-4 or
PP-4T
"
267ci
4.4L
3.500
1979-82
OHV Chevrolet V-8 Eng. U.S. & Canada mfg.
Chevrolet Bel Air, Nomad, Corvette, 150, 210.
Chev/GMC Truck & Van: 10 - 80 Series
OHV Pontiac V-8 Type S Eng. Buick Century, Regal;
Pontiac Bonneville, Catalina, Firebird, Grand Am, Grand
Prix, Lemans, Safari
OHV Chevrolet V-8 Type J Eng. Buick, Chevrolet,
Olds, Pontiac Passenger Cars. Chev/GMC Truck:
Caballero, El Camino. Optional brg choices listed
CH-8
CHP-8 or
CHP-8T
(Coated)
6 cyl 270ci
4.4L
3.781
1939-62
8 cyl 273ci
4.5L
4474cc 3.622
1987-92
(92mm)
above under V-8 262 ci.
OHV 6 cyl Eng. GMC Truck: 100-460, 1500-3500
Series
OHV Cadillac V-8 Type 3, 5, 8 Eng. Cadillac Full Size,
Allante, Deville, Eldorado, Seville
"
283ci
4.6L
3.875
1957-63
"
283ci
4.6L
3.875
1964-67
OHV Chevrolet V-8 Eng. U.S. & Canada mfg. Chev.
Full Size, Nomad, Chevy II, Corvette, 150, 210.
Chev/GMC Truck & Van: 10-80, 1500-3500 Series
OHV Chevrolet V-8 Eng. U.S. & Canada mfg. Chev.
Full Size, Nomad, Camaro, Chevy II, Chevelle, Corvette.
Options:
(Coated)
(Coated)
(Coated)
CH-2
C-4
C-4A
CH-4
(Coated)
CH-8
CH-4A
CHP-8R1
CHP-8R2
CHP-8R3
CHP-8R4
287ci
4.7L
3.750
1955
OHV Pontiac V-8 Eng. Pontiac Chieftain, Star Chief
CHP-8 or
CHP-8T
(Coated)
"
CHP-4 or
CHP-4T
P-3
PP-3 or
PP-3T
(Coated)
25
(1/2-Full Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
P-3
PP-3 or
PP-3T
8 cyl 288ci
4.7L
3.750
1955-58
OHV Pontiac V-8 Eng. GMC Truck: 100-500 Series
6 cyl 292ci
4.8L
3.875
1963-70
292ci
4.8L
3.875
1971-90
8 cyl 293ci
4.8L
3.780
1999-01
OHV Chevrolet 6 cyl Eng. Chev/GMC Truck: Blazer,
Jimmy, Suburban, 10-60, 1500-6500 Series
OHV Chevrolet 6 cyl Type T Eng. Chev/GMC Truck:
Same as above
OHV Chevrolet V-8 Vin Type V Eng. GM Passenger
Car, Chev/GMC Truck: Blazer, 1000-2500 Series
8 cyl 299ci
4.9L
3.622
1991-96
OHV Cadillac V-8 Type B Eng. Cadillac Full Size,
Deville, Eldorado, Seville
(Coated)
CH-7
CH-11
CH-10
CHP-10 or
CHP-10T
(Coated)
(92mm)
"
300ci
4.9L
3.750
1964-67
OHV Buick V-8 Eng. Buick Full Size, Skylark, Special
"
301ci
4.9L
4.000
1977-81
"
302ci
5.0L
4.000
1967-70
OHV Pontiac V-8 Type W Eng. incl. Turbo. Buick Full
Size, Skylark; Chev Camaro; Olds Full Size; Pontiac
Full Size, Firebird, Grand Am, Grand Prix, LeMans
OHV Chevrolet V-8 Eng. Chevrolet Camaro, Z-28 &
Hi-Perf
Options:
C-4
C-4A
B-11
P-4
PP-4 or
PP-4T
CH-8
CHP-8 or
CHP-8T
(Coated)
(Coated)
CH-4A
CHP-8R1
CHP-8R2
CHP-8R3
CHP-8R4
5.0L
4.000
1952-59
OHV 6 cyl GMC Eng. Chev/GMC Truck: 370-500 Series
CH-2
305ci
5.0L
4.250
1960-75
GM-5
8 cyl 305ci
5.0L
3.736
1976-00
OHV GMC V-6 Type 305C, V Eng. GMC Truck/Van:
50-6500 Series
OHV Chevrolet V-8 Type E-H, Q, M, S, U, X Eng.
Buick Full Size, Skylark; Chev. Full Size, Camaro,
Chevelle, Corvette, Nova; Olds Full Size; Pontiac Full
Size, Firebird, Grand Am, Grand Prix, Phoenix, Sunbird,
Ventura; Chev/GMC Truck & Van: Blazer, El Camino,
Jimmy, Suburban, Tahoe, Yukon, 10-3500 Series
Options:
6 cyl 302ci
"
CH-8
(Coated)
CH-4A
CHP-8R1
CHP-8R2
CHP-8R3
CHP-8R4
"
307ci
5.0L
3.875
1968-73
OHV Chevrolet V-8 Type A, F Eng. Chev. Full Size,
Camaro, Chevelle, Nova; Pontiac Ventura, T-37
Chev/GMC Truck/Van: Blazer, El Camino, Jimmy, Sprint,
10-3500 Series
CHP-8 or
CHP-8T
CH-8
CHP-8 or
CHP-8T
(Coated)
Options:
CH-4A
CHP-8R1
CHP-8R2
CHP-8R3
CHP-8R4
"
307ci
5.0L
3.800
1980-90
OHV Olds V-8 Type Y Eng. Buick, Cadillac, Chevrolet,
Olds, Pontiac Full Size Passenger Cars
26
O-7
(1/2-Full Shell)
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
PP-3 or
PP-3T
8 cyl 316ci
5.2L
3.938
1955-56
OHV V-8 Eng. Pontiac Chieftain, Star Chief
GMC Truck: 100-500 Series
P-3
OHV Olds V-8 Eng. Olds 88, 98. GMC Truck: 550,
600 Series
OHV Chevrolet V-8 Vin Type T Eng. GM Passenger Car,
Chev/GMC Truck: Blazer, Suburban, 1000-3500 Series
O-5
(Coated)
"
324ci
5.3L
3.875
1954-56
"
325ci
5.3L
3.780
1999-01
"
326ci
5.3L
3.719
1963-67
OHV Pontiac V-8 Eng. Pontiac Firebird, LeMans,
Safari, Tempest
"
327ci
5.3L
4.000
1962-63
"
327ci
5.3L
4.000
1964-69
OHV Chevrolet V-8 Eng. Chev. Full Size incl. Impala,
Chevelle, Chevy II, Corvette, Malibu, Nova
OHV Chevrolet V-8 Eng. Same as above including
Camaro, El Camino, Sprint & Hi Perf.
Options:
CH-10
CHP-10 or
CHP-10T
P-4
PP-4 or
PP-4T
CH-4
CHP-4 or
CHP-4T
CH-8
CHP-8 or
CHP-8T
(Coated)
(Coated)
(Coated)
(Coated)
CH-4A
CHP-8R1
CHP-8R2
CHP-8R3
CHP-8R4
O-6
1949-55
OHV Olds V-8 Eng. 1st and 2nd series. Olds Cutlass,
F-85, Vista Cruiser, Jetstar, 88
OHV Cadillac V-8 Eng. Cad. Full Size, Deville
3.875
1958-59
OHV V-8 Eng. GMC Truck 100-500 Series
P-3
5.6L
3.750
1966
B-8
340ci
5.6L
3.750
1966-67
OHV Buick V-8 Eng. Buick Gran Sport, LeSabre,
Skylark, Special, Sportwagon
Buick applications same as above
"
346ci
5.7L
3.897
1997-01
OHV Chev. LS-1 Mark III V-8 Vin Type G (Pass. Cars),
R (Truck) Eng. Chevrolet Corvette. Chev/GMC Truck
"
347ci
5.7L
3.938
1957-58
"
348ci
5.7L
"
350ci
5.7L
OHV V-8 Type A, B Eng. Pontiac Chieftain, Safari,
Star Chief, Super Chief, GMC Truck 100-500 Series
OHV Chevrolet V-8 Eng. Chevrolet Full Size Passenger
Cars. Chev/GMC Truck: 60-100 Series
OHV Chevrolet V-8 Vin Type G, H, K, L, M, P, R, T, V,
X, Y, 4, 6, 7, 8 Engs. incl. Hi Perf, Vortex & Aluminum
blocks except DOHC Eng. Chevrolet & Hi-Perf, Buick,
Cadillac, Olds, Pontiac Passenger Cars. Chev/GMC
Truck & Van: Blazer, Jimmy, El Camino, Suburban,
Yukon & S.U.V's, 10-6500 Series
Options:
"
330ci
5.4L
3.938
1964-67
"
331ci
5.4L
3.813
"
336.9ci
5.5L
"
340ci
"
C-2
PP-3 or
PP-3T
(Coated)
B-11
CH-10
CHP-10 or
CHP-10T
P-3
PP-3 or
PP-3T
(Coated)
1958-65
4.000
1967-99
"
350ci
5.7L
4.000
1967-ON
Chevrolet Bowtie block with 2.000" hsg bores. High
performance set. See applications above
CH-5
CH-8
CHP-8 or
CHP-8T
(Coated)
CH-4A
CHP-8R1
CHP-8R2
CHP-8R3
CHP-8R4
GMP-8 or
GMP-8T
(Coated)
27
(1/2-Full Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
8 cyl 350ci
5.7L
4.000
GMP-55 or
GMP-55T
Hi-Perf block with 55mm 2.282" camshaft journal O.D.
(Coated)
"
350ci
5.7L
3.800
1968-81
"
350ci
5.7L
3.800
1966-67
"
350ci
5.7L
4.057
1976-81
1978-85
"
350ci
5.7L
4.057
1967-76
"
350ci
5.7L
4.057
"
350ci
5.7L
3.875
1968-77
6 cyl 351ci
5.7L
4.563
1960-73
8 cyl 364ci
6.0L
3.620
1999-01
OHV Buick V-8 Vin Type B, H, J, X Eng. Buick
Passenger Cars incl. Century, Electra, Gran Sport,
LeSabre, Park Ave., Regal, Skylark, Special, Riviera
OHV Buick V-8 Eng. Buick Special & Passenger Cars
B-9
BP-9 or
BP-9T
(Coated)
B-11
OHV Olds, Cadillac V-8 350 Vin Type B, R, 8 Eng.
Buick, Cadillac, Olds, Pontiac Passenger Cars
OHV Olds V-8 Diesel 350 Vin Type N, Z Eng.
Buick, Cadillac, Chevrolet, Olds, Pontiac Passenger
Cars Chev/GMC Truck & Van: Caballero, El Camino,
10-3500 Series
OHV Olds V-8 Eng. Buick Centurion, Century, Estate
Wagon, LeSabre, Regal, Skylark, Special, Sportwagon
OHV Olds Rocket Hi-Perf Eng. w 2.120 hsg bore,
1.95 cam journal
O-7
OHV Pontiac V-8 Vin Type A, B, E, K, M, N & P Eng.
Pontiac Bonneville, Catalina, Firebird, Grand Am, Grand
Prix, GTO, LeMans, Phoenix, Safari, T-37, Ventura
OHV GMC V-6 Type 351C, 351E, 351M, G351 Gas
Eng. D351 Diesel (64-67) Eng. GMC Truck: 10008500 Series
OHV Chev. V-8 Vin Type U Eng. Chev/GMC S.U.V.,
Truck & Van.
OHV Buick V-8 Eng. Buick Century, Estate Wagon,
LeSabre, Limited, Roadmaster, Special, Super
OHV Cadillac V-8 Eng. Cadillac Full Size, Eldorado
P-4
O-6
GMP-1 or
GMP-1T
(Coated)
"
6.0L
4.125
1957-61
"
364ci
Buick
365ci
6.0L
4.000
1956-58
"
366ci
6.0L
3.937
1967-98
OHV Chevrolet V-8 Type E, L Eng. Chev/GMC Truck &
Van: 40-80; 5000-8500 Series
Options:
(Coated)
GM-5
CH-10
CHP-10 or
CHP-10T
B-8
C-2
CH-12
CHP-12 or
CHP-12T
(Coated)
CHP-12R1
CHP-12R2
OHV Chevrolet V-8 Eng. Chev/GMC Truck & Van:
40-80; 5000-8500 Series
OHV Cadillac V-8 Modulated displacement Type 6, 9
Eng. Cadillac Full Size, Deville, Eldorado, Seville
OHV Olds/GMC V-8 Eng. GMC Truck: 550, 600 Series
PP-4 or
PP-4T
CH-9A
"
366ci
6.0L
3.937
1966
"
368ci
6.0L
3.800
1980-84
"
370ci
6.1L
4.000
1957-59
"
370ci
6.1L
4.063
1958
OHV Pontiac V-8 Eng. Pontiac Bonneville, Catalina,
Chieftain, Safari, Star Chief, Super Chief
P-3
"
371ci
6.1L
4.000
1957-60
OHV Olds/GMC V-8 Eng. Olds 88, Dynamic 88, 98
O-5
6 cyl 379ci
6.2L
4.563
1973-75
OHV GMC V-6 Eng. GMC Truck: 60; 5500-6500 Series
GM-5
8 cyl 381ci
6.2L
6211cc 3.976
1982-93
OHV GM Diesel V-8 Type C, J Eng. Chev/GMC Truck
& Van: Sierra, Suburban, Yukon, 10-30; 1500-3500
Series
Executive, Grand Prix, GTO, LeMans, Safari, Star
Chief, Tempest, Ventura, Vista, 2 + 2
GM-7
C-3
O-5
PP-3or
PP-3T
(Coated)
(101mm)
"
389ci
6.4L
4.063
1963-66
28
P-4
PP-4 or
PP-4T
(Coated)
(1/2-Full Shell)
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
PP-3 or
PP-3T
8 cyl 389ci
6.4L
4.063
1959-62
Grand Prix, Safari, Star Chief, Ventura, Vista
P-3
C-3
O-5
(Coated)
"
390ci
6.4L
4.000
1963
"
390ci
6.4L
4.000
1959-62
OHV Cadillac V-8 Eng. Cadillac Full Size, Deville,
Eldorado
OHV Cadillac V-8 Eng. See applications above
"
394ci
6.5L
4.125
1959-64
OHV Olds V-8 Eng. Olds Jetstar, Starfire, 88, 98
"
395ci
6.5L
4.055
1991-00
OHV GM Diesel/Turbo Diesel V-8 Type F, P, S, Y Eng.
Chev/GMC Truck & Van: Blazer, Jimmy, Express,
Savana, Sierra, Suburban, Tahoe, Yukon, 10-30; 15003500 Series
OHV Chevrolet Big Block V-8 & Hi-Perf. Eng. Chev.
Full Size, Camaro, Chevelle, Corvette, Malibu, Nova
Chev Truck: El Camino, 10-30; 1500-3500 Series
Options:
(103mm)
"
396ci
6.5L
4.094
1967-71
C-2
GM-7
CH-12
(Coated)
CHP-12R1
CHP-12R2
"
396ci
6.5L
4.094
1965-66
"
400ci
6.6L
4.125
1970-80
OHV Chevrolet Big Block V-8 & Hi-Perf. Eng. See
applications above
OHV Chevrolet 400 Small Block V-8 & Hi-Perf. Eng.
Chev. Full Size, Chevelle Malibu, Monte Carlo
Chev/GMC Truck & Van: Blazer, El Camino, Jimmy,
Sprint, Suburban, 10-30; 1500-3500 Series
Options:
CH-9A
CH-8
CH-4A
CHP-8R1
CHP-8R2
CHP-8R3
CHP-8R4
400ci
6.6L
4.125
1970-72
Full Size, Camaro, Chevelle, Corvette, Malibu, Nova
Chev Truck: El Camino, 10-30; 1500-3500 Series
Options:
CHP-8 or
CHP-8T
(Coated)
"
CHP-12 or
CHP-12T
CH-12
CHP-12 or
CHP-12T
(Coated)
CHP-12R1
CHP-12R2
"
400ci
6.6L
4.040
1967-69
OHV Buick V-8 Eng. Buick Gran Sport, Skylark, Sport
Wagon
B-9
"
400ci
6.6L
4.188
1965-66
OHV Buick V-8 Eng. Buick Gran Sport, Skylark
B-8
"
400ci
6.6L
1968-69
1965-67
OHV Olds V-8 Type H & Hi-Perf. Eng. Olds F-85, 442
O-6
400ci
6.6L
3.870
4.000
3.870
4.000
400ci
6.6L
4.120
1967-79
6 cyl 401ci
6.6L
4.875
1960-72
8 cyl 401ci
6.6L
4.188
1959-66
BP-9 or
BP-9T
(Coated)
GMP-1 or
GMP-1T
OHV Olds Rocket Hi-Perf Eng. w 2.120 hsg bore
Olds Hi-Perf
(Coated)
"
OHV Pontiac V-8 Type R Eng. Buick Full Size, LeSabre,
Riviera; Olds Custom Cruiser, Cutlass, 88, 98; Pontiac
Full Size, Firebird, Grand Am, Grand Prix, GTO, LeMans
OHV GMC V-6 Type M Eng. Chev/GMC Truck: 50006000 Series
OHV Buick V-8 Eng. Buick Full Size, Gran Sport,
Riviera
29
P-4
PP-4 or
PP-4T
(Coated)
GM-5
B-8
(1/2-Full Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
CH-12
CHP-12 or
CHP-12T
8 cyl 402ci
6.6L
4.125
1970-72
Full Size, Camaro, Chevelle Malibu, Monte Carlo, Nova
Chev Truck: El Camino, Sprint, 10-30; 1500-3500 Series
Options:
(Coated)
CHP-12R1
CHP-12R2
"
403ci
6.7L
4.351
1977-79
"
409ci
6.7L
"
421ci
6.9L
4.094
1963-66
"
421ci
6.9L
4.094
1961-62
"
425ci
7.0L
4.313
1963-66
"
425ci
7.0L
4.082
1977-79
"
425ci
7.0L
4.125
1965-67
"
427ci
7.0L
4.250
1967-98
1961-66
OHV Olds V-8 Eng. Buick Full Size, Regal, Riviera,
Olds Full Size, Cutlass, Toronado; Pontiac Full Size
OHV Chevrolet V-8 & Hi-Perf. Eng. Chev. Bel Air,
Biscayne, Impala. Chev Truck: 80-100 Series
OHV Pontiac V-8 Eng. Pontiac Full Size, Grand Prix,
GTO
O-7
CH-5
P-4
PP-4 or
PP-4T
OHV Pontiac V-8 Eng. Pontiac Full Size incl. Catalina,
Executive, Star Chief
P-3
PP-3 or
PP-3T
OHV Buick V-8 Eng. Buick Full Size, Electra, Gran
Sport, Riviera, Skylark, Wildcat
OHV Cadillac V-8 Type S, T Eng. Cadillac Full Size,
Deville, Eldorado
OHV Olds V-8 Eng. Olds Full Size, 88, 98, Toronado
B-8
(Coated)
(Coated)
OHV Chevrolet Big Block V-8 incl. Aluminum & Hi-Perf.
Eng. Chev. Full Size, Camaro, Corvette & Hi-Perf.
Options:
C-3
O-6
CH-12
(Coated)
CHP-12R1
CHP-12R2
"
427ci
7.0L
4.250
1966
"
428ci
7.0L
4.120
1967-69
"
429ci
7.0L
4.130
1964-67
"
430ci
7.0L
4.188
1967-69
6 cyl 432ci
7.1L
4.875
1973-77
8 cyl 454ci
7.4L
4.250
1970-99
OHV Chevrolet Big Block V-8 & Hi-Perf. Eng.
Chev. Full Size, Corvette & Hi-Perf.
OHV Pontiac V-8 Eng. Pontiac Full Size incl.
Bonneville, Catalina, Executive, Grand Prix, Ventura
CHP-12 or
CHP-12T
CH-9A
P-4
PP-4 or
PP-4T
(Coated)
OHV Cadillac V-8 Type S, T Eng. Cadillac Full Size,
Deville, Eldorado
OHV Buick V-8 Eng. Buick Full Size, Electra, LeSabre,
Riviera, Wildcat
C-3
B-9
BP-9 or
BP-9T
(Coated)
OHV GMC V-6 Type M Eng. Chev/GMC Truck: 80;
5500-8500 Series
OHV Chev Big Block V-8 Vin Type J, L, N, S, V, W, Y
incl. Alum. & Hi-Perf. Eng. Chev. Full Size, Chevelle,
Corvette, Monte Carlo & Hi-Perf. Chev/GMC Truck &
Van: Blazer, El Camino, Jimmy, Sierra, Sprint, Suburban,
Yukon, 10-30, 1500-3500 Series
Options:
GM-5
CH-12
(Coated)
CHP-12R1
CHP-12R2
"
455ci
7.5L
4.313
1970-76
"
455ci
7.5L
4.125
1968-76
OHV Buick V-8 Type T, U, V Eng. Buick Full Size,
Century, Electra, Estate Wagon, Gran Sport, LeSabre,
Limited, Regal, Riviera, Wildcat
OHV Olds V-8 Type W, U, V Eng & Hi-Perf. Olds Full
Size, 88, 98, Cutlass, F-85, Toronado, 442
30
CHP-12 or
CHP-12T
B-9
BP-9 or
BP-9T
(Coated)
O-6
(1/2-Full Shell)
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
P-4
PP-4 or
PP-4T
8 cyl 455ci
7.5L
4.150
1970-76
472ci
7.7L
4.300
1968-74
6 cyl 478ci
7.8L
5.125
1962-75
8 cyl 500ci
8.2L
4.300
1970-76
8.2L
4.466
"
"
502ci
OHV Pontiac V-8 Type Y (H.O. & S.D.) Eng. Pontiac
Full Size incl. Bonneville, Catalina, Firebird, Grand Am,
Grand Prix, Grand Ville, LeMans, Safari, T-37, Tempest
OHV Cadillac V-8 Type R, 0, 1, 8, 9 Eng. Cadillac Full
Size, Eldorado
OHV GMC V-6 Type 478M Gas, D478 & DH478 Diesel
Eng. Chev/GMC Truck & Van: 40-80, 4000-8500 Series
OHV Cadillac V-8 Type O, S, 0, 1 Eng. Cadillac Full
Size, Eldorado
OHV Chev Bowtie Alum. V-8 Hi-Perf. Block w std.
hsg bores. GM Hi-Perf Car & Truck
Options:
(Coated)
C-3
GM-5
C-3
CH-12
(Coated)
CHP-12R1
CHP-12R2
CHEVROLET above w +.010 OD
CHEVROLET above w +.020 OD
"
502ci
8.2L
4.466
"
636ci
10.4L
4.500
1975-79
"
855ci
14.0L
5.500
1970-87
"
855ci
14.0L
5.500
1977-ON
CHP-12 or
CHP-12T
GMP-12 or
GMP-12T
Chevrolet V-8 "Bowtie" Hi-Perf Block w 2.129 hsg bore
GM Hi-Perf Car & Truck
(Coated)
Caterpillar 3208 (early & late), 3208N Diesel Eng.
GM HD Truck & Industrial
H, HS, N, NH, NHC, NHCT, NHD, NHE, NHF, NHHR,
NHHT, NHR, NHS series & NT, NTA, NTC, NTE,
NTF, NTO series Power torque GM Series 230, 250,
270, 270E, 290, 300, 350, 400 Diesel & Turbo Diesel
Eng. GM HD Truck & Industrial
2 1/2 in big cam series 3/32 wall
CAT-2
CU-5A
CU-9
HERCULES
2.1L
3.500
DD-G0130 Series
HE-7
149ci
2.4L
3.750
DD-G0149, D-G 1500 Series
HE-7
4 cyl 163ci
2.7L
4.000
G-1600, J4XL-D3
HE-1
164ci
2.7L
3.500
JX4E
HE-1
3 cyl 169ci
2.8L
4.000
DD-G0163, D-G 1700 Series
HE-7
4 cyl 173ci
2.8L
3.500
DD-G0173 Series
HE-8
188ci
3.1L
3.750
JX4C, JX4C2, JX4C3, JX4C5
HE-1
6 cyl 191ci
3.1L
3.125
QXA Series
HE-5
4 cyl 198ci
3.3L
3.750
DD-198, DOOB, D2000 Series
HE-1
199ci
3.3L
3.750
DD-GO198, D2000, D2120, G2000, G2120 Series
HE-8
6 cyl 205ci
3.4L
3.250
QXB Series
HE-5
4 cyl 214ci
2.5L
4.000
JX4D, JX4D2, JX4D3, JX4D5
HE-1
3 cyl 130ci
"
"
"
"
31
(1/2-Full Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
HERCULES (CONT'D)
6 cyl 222ci
3.6L
3.375
QXC Series
HE-5
4 cyl 226ci
3.7L
4.000
DD-G0226, D-G2300 Series
HE-1
6 cyl 228ci
3.7L
3.375
JXA Series
HE-1
"
230ci
3.8L
3.438
QXD Series
HE-5
"
232ci
3.8L
3.406
JX, JXF Series
HE-1
"
237ci
3.9L
3.438
QXLD Series
HE-1
"
245ci
4.0L
3.500
JXE & JXG Series
HE-1
"
260ci
4.3L
3.500
DD260-G0260 Series
HE-8
"
263ci
4.3L
3.625
JXA & JXB Series
HE-1
"
282ci
4.6L
3.750
JXC, JXCT Series
HE-1
"
298ci
4.9L
3.750
DD-298-G0298
HE-8
"
298ci
4.9L
3.750
D3000-G3000 Series
"
320ci
5.2L
4.000
JXD, JXDF Series
HE-1
"
339ci
5.6L
4.000
JXLD Series
HE-1
"
339ci
5.6L
4.000
DD339-G0339
HE-8
"
339ci
5.6L
4.000
D3400-G3400 Series
1.3L
1342cc 2.910
HE-8A
HE-8A
HINO
HONDA
4 cyl
1984-89
(74mm)
"
1.5L
1488cc 2.910
1984-89
(74mm)
"
1.5L
1.6L
1493cc 75mm
1590cc 75mm
1988-91
1992-95
SOHC 16 valve Honda D13A2, EV, EV1 Eng. Civic,
CRX, CRX HF (High Fuel)
SOHC Honda EW1 Series Eng. Civic, Civic CRX,
HF (High Fuel), Si
SOHC 16 valve Honda D15B1, B2, B6, B7 Series Eng.
Civic 1500, Civic CRX DX, del Sol (1.100" Cam Jn. Diam.)
SOHC VTEC Honda D16Z6 Series Eng. Civic EX
HA-2*
(1/2 Shell)
HA-2*
(1/2 Shell)
HA-3*
(1/2 Shell)
HA-4*
(1/2 Shell)
"
1.8L
1829cc 3.150
1983-90
(80mm)
"
2.0L
1955cc 3.250
1983-89
(82.7mm)
"
2.2L
2156cc 3.346
(85mm)
1990-97
SOHC Honda A18A, A18A1, ES, ES1, ES2, ES3, ET,
ET2 Series Eng. Accord DX, LX, S, Sei, Prelude
SOHC Honda A20A, A20A1, A20A3, BS1, BS2, BT1,
BT2 Eng. Accord DX, LX, SEi
SOHC Honda F22A, F22A1 & VTEC F22B1, F22B2,
F22B6 Eng. Accord DX, LX, SE, Prelude, Prelude S
(1.100" Cam Jn. Diam.)
32
HA-1*
(1/2 Shell)
HA-1*
(1/2 Shell)
HA-3*
(1/2 Shell)
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
HYUNDAI
4 cyl
1.5L
1468cc 2.970
1985-94
(75.5mm)
"
1.6L
1597cc 76.9mm
1985-90
MIA-3*
SOHC 8 valve Mitsubishi G15B, G4AJ, DJ, 4G15 Eng.
Hyundai Excel, Scoupe
SOHC 8 valve Mitsubishi G32B Eng. Hyundai Excel,
Pony, Scoupe, Stellar
(Full Round)
MIA-1*
(1/2 Shell)
MIA-2*
(1/2 Shell)
"
2.0L
1997cc 3.346
1981-98
(85mm)
"
2.4L
2351cc 3.470
(86.5mm)
1989-91
SOHC 8 valve G63B (83-89), DOHC 16 valve G4CP,
4G63 (90-98) Mitsubishi Eng. incl. turbo. Hyundai
Stellar (Balance shaft set)
SOHC 8 valve Mitsubishi G64B, G4CS Eng. Hyundai
Sonata
MIG-3**
MIA-1*
(1/2 Shell)
MIA-2*
(1/2 Shell)
(Balance shaft set)
MIG-3**
IHC TRACTOR & INDUSTRIAL
4 cyl 69ci
1.1L
2.500
CO-3
"
112ci
1.8L
3.188
Y69, Y4069 Continental L Head Eng. IHC Hay Baler
15, 50AW, 50T, Combine 50-62
Y112 Continental L Head Eng. IHC Hay Baler 22
"
132ci
2.2L
3.250
CK, FC132, FG132, FK132, FL Series Eng.
WA-3
"
144ci
2.4L
3.375
IHC Gas & Diesel Type BC144, BD144, BD144C Eng.
IN-18
"
152ci
2.5L
3.375
IHC C152 & U-4 Eng.
IN-15
"
153ci
2.5L
3.375
IHC UC153 (Early) Eng.
IN-15
"
154ci
2.5L
3.500
IHC Gas & Diesel Type BD154, BD154T Eng.
IN-18
"
164ci
2.7L
3.500
IHC C164 & U164 Eng.
IN-15
"
166ci
2.7L
3.688
IHC Diesel Type D166 Eng.
IN-12
"
169ci
2.8L
3.563
IHC C169 & U169 Eng.
IN-15
6 cyl 174ci
2.8L
3.000
IHC HD 174 Eng.
IN-15
4 cyl 175ci
2.8L
3.625
IHC C175 (early) & U175 Eng.
IN-15
CO-3
"
176ci
2.9L
3.563
IHC C175 (late) Eng.
IN-15
"
188ci
3.1L
3.688
IHC D188 Eng.
IN-12
"
193ci
3.2L
3.750
Continental D193 Diesel Eng.
CO-9
6 cyl 193ci
3.2L
3.250
IHC/Navistar 193 Series Eng.
J-1
4 cyl 200ci
3.3L
3.813
IHC C200 Eng.
6 cyl 213ci
3.5L
3.313
IHC HD213 Eng.
J-1
3.5L
3.313
J-1
"
214ci
33
IN-15
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
IHC TRACTOR & INDUSTRIAL (CONT'D)
6 cyl 220ci
3.6L
3.563
IN-14
"
221ci
3.6L
3.563
IHC BD220, C220, UC220 Eng incl OHV Navistar Truck
220 Series
IHC C221 & UC221 Eng.
"
232ci
3.8L
3.313
IHC HD232 Eng.
J-1
"
232ci
3.8L
3.750
OHV AMC Hi-Torque C232 Series Eng.
N-7
"
233ci
3.8L
3.375
IHC/Navistar GRD 233 Series Eng.
J-1
"
236ci
3.9L
3.688
IHC C236, D236 Diesel & UD236 Diesel Eng.
4 cyl 248ci
4.1L
3.875
IHC C248, U6 Eng.
6 cyl 263ci
4.3L
3.563
IHCC263, U263, & UC263 Eng.
4 cyl 264ci
4.3L
4.000
IHC C264, D264 Diesel, U264, UD264 & UD264A Diesel
6 cyl 264ci
4.3L
3.688
OHV IHC/Navistar BD264 Series Eng.
IN-14
4 cyl 281ci
4.6L
4.125
IHC C281, D281 Diesel & U281 Eng.
IN-5
6 cyl 282ci
4.6L
3.688
IHC C282. IHC Diesel Engs: D282, D282H, DT282, &
UDT282 Series
IHC C291 Eng.
IN-14
IN-14
IN-14
IN-14
IN-5
IN-14
IN-5
IN-14
"
291ci
4.8L
3.750
"
301ci
4.9L
3.813
8 cyl 304ci
5.0L
3.875
IHC C301, UC301 Eng. IHC/Navistar D301, DT301
Diesel Eng.
OHV IHC/Navistar V304 Series Eng.
6 cyl 312ci
5.1L
3.875
IHC D312, DT312, UD312 Diesel Eng.
IN-19
8 cyl 345ci
5.6L
3.875
IN-11
6 cyl 360ci
5.9L
3.875
IN-19
IN-16
"
361ci
5.9L
4.125
"
372ci
6.1L
4.375
IHC R372, RD372, RED 372, U372, & UR372 Eng.
8 cyl 392ci
6.4L
4.125
6 cyl 406ci
6.7L
4.375
IHC R406, RD406, RED406 & U406 Eng.
IN-11
IN-3
IN-11
IN-3
"
407ci
6.7L
4.321
IHC D407, DT407 Diesel Eng.
IN-16
"
414ci
6.8L
4.300
IHC D414, DT414, & UD414 Diesel Eng.
IN-19
"
436ci
7.1L
4.300
IHC D436 & DT436 Diesel Eng.
IN-19
"
450ci
7.4L
4.375
IHC R450, U450, & UR450 Eng.
IN-3
"
466ci
7.6L
4.300
IHC D466, DT466, DT466B, DT466C, DTA466C,
DTI466B, DTI466C, UD466 Diesel Eng.
34
IN-19
Hi Perf
(1/2-Full Shell)
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
IHC TRACTOR & INDUSTRIAL (CONT'D)
IN-3
6 cyl 501ci
8.2L
4.500
IHC U501 & UR501 Eng.
8 cyl 551ci
9.0L
4.510
IHC/Navistar DV550, DV551 Series Diesel Eng.
IN-10A
IHC DT573, DT573H, DVT573, DVT573B, UDT573
Diesel Eng.
IHC C605 Eng.
IN-20^
"
573ci
9.4L
4.500
"
605ci
9.9L
4.625
"
743ci
12.2L
5.125
"
743ci
12.2L
5.125
"
800ci
13.1L
5.313
"
855ci
14.0L
5.500
"
855ci
14.0L
5.500
1977-ON
1977-ON
IN-10A
OHV Cummins Diesel NRT, NTO small cam series
IHC Industrial/Ag applications
OHV Cummins Diesel HRB Series Eng. 2 1/2 inch big
cam series, 3/32 wall. IHC Industrial/Ag applications
IHC DV800, DVT800, V800 Eng.
CU-5A
OHV Cummins Diesel NT, NTA, NTC, NTE, NTF,NTO
series Power torque 270, 300 & 330 Series Eng.
2 1/2 inch big cam series, 3/32 wall. IHC Industrial/Ag
applications
OHV Cummins Diesel Series Eng. (see above)
IHC Industrial/Ag applications
CU-5A
CU-9
IN-20^
CU-9
IHC (NAVISTAR) TRUCK
4 cyl 73.1ci
1.2L
1198cc 65.5mm
"
90.8ci
1.5L
1489cc 73mm
"
132ci
2.2L
3.250
"
152ci
2.5L
3.875
6 cyl 175ci
2.8L
3.000
193ci
3.2L
3.250
4 cyl 196ci
3.2L
4.125
1967-80
6 cyl 198ci
3.2L
3246cc 83mm
1977-80
"
1961-63
1961-68
"
214ci
3.5L
3.313
1937-49
"
220ci
3.6L
3.563
1960-68
"
232ci
3.8L
3.750
1969-78
"
233ci
3.8L
3.313
"
240ci
3.9L
3.563
1960-68
"
241ci
3.9L
3.375
1937-40
"
242ci
4.0L
3.375
IHC A55 & AM80
DA-2
IHC A55 & AM80
DA-2
IHC FC, FC132 & FK132 Eng.
WA-3
IHC 4-152 & 4-152T, B-152 Eng. Scout & Commanche,
1/2 T Truck, C-900, CH-90, CM, D, M, S, 900 Series
Truck
IHC/Navistar GRD175, GRD175A, HD1, HD2, HD3, HD4,
HD174 Eng. C, CS, D, DS, K, KB, KS Series Truck
IN-11
IHC/Navistar 4-196 Series Eng. IHC Scout, M, MA
Series, 1/2 T Truck
6-33, 6-33T, IN633 Nissan SD33 Diesel. Scout II
IN-11
IHC GRD 214, 214A, HD3, HD213, HD213A Eng. D2-3,
15-30, K1-3, K4-5, KB1-5, KBS Series Truck
IHC BD220, BG220, SD220, S220, U220 Eng.
1/2-1 Ton, A, AB, AC, AM, B, BC, C, CH, CM, LM, M,
MA, R, RA, RM, S, SA, SC, SM Series Truck
AMC 6-232 Series 6 cyl Eng. Scout, Scout II, 1/2 - 1
(500-1500) Ton Truck
IHC HD232, GRD 233 & GRD 233A Eng. K4-5, KBS &
KS4-5 Series
IHC BD240, SD240, S240, U240 Eng. 1/2 - 1 Ton,
A-AM, B-BD, C, L, LB, LC, R-RM, S-SM Series Truck
IHC BG241 Eng. IHC Truck
OHV IHC 242 Series Eng. IHC Truck
35
J-1
J-1
DA-5
J-1
IN-14
N-7
J-1
IN-14
IN-14
J-1
Hi Perf
(1/2-Full Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
IHC (NAVISTAR) TRUCK (CONT'D)
6 cyl 258ci
4.2L
3.750
1971-74
AMC 6-258 Series 6 cyl Eng. Scout, Scout II, 1/2 - 1
Ton, (500-1500) Truck
"
259ci
4.3L
3.500
IHC FAB259 Eng. IHC Truck
"
264ci
4.3L
3.688
1955-69
8 cyl 266ci
4.3L
3.625
1960-70
6 cyl 301ci
5.0L
3.813
1963-70
8 cyl 304ci
5.0L
3.875
1960-80
6 cyl 318ci
5.2L
3.875
8 cyl 345ci
5.6L
3.875
6 cyl 360ci
5.9L
1961-82
"
361ci
5.9L
4.125
1938-49
"
372ci
6.1L
4.375
1954-69
8 cyl 392ci
6.4L
4.125
1966-82
8 cyl 400ci
6.6L
4.165
1974
6 cyl 401ci
6.6L
4.500
1949-74
8 cyl 401ci
6.6L
4.125
1960-74
404ci
6.6L
4.125
1975-82
6 cyl 406ci
6.7L
4.375
1954-74
414ci
6.8L
4.300
8 cyl 421ci
6.9L
4.000
6 cyl 436ci
7.1L
4.300
8 cyl 445ci
7.3L
4.110
"
1982-87
IN-14
OHV IHC V-8 V304 Eng. AM160-170, B, BC, C, CO, M,
MA, MC, 500-1703 Series Truck
IHC RED318 & RED318A Eng. 1853 Series, Lt - Md
Truck
OHV IHC/Navistar V345, V345A Eng. 1/2-1 Ton, Scout,
Travelall, B, BC, BCF, CO-COF, F, M, MC, MS, VCO,
173FC-183FC, 900, 1000-1500, 1600-1890 Series
IHC/Navistar DT-360 Diesel Eng. O.E. Brg Set #680117
IN-11
IHC FBB361, FBC361, RED361 & RED361A Eng. 1853
Series, IHC Truck: K8, K10-11, KB, KBR, KBS, KR,
KS8-11 Series
IHC RD372 & RED372 Eng. CO, COF190-225; F1900;
L, LF190; R185-225, R1850, RC190-200, RF190, 200;
S1853, T1900, V196, 1850-2000 Series
OHV IHC/Navistar V392, UV392 Eng. 1/2-1 Ton, Scout,
Travelall, CO1600-1800, COF1810A, VCO, 183RE,
900, 1000-1500, 1600-1890 Series
OHV AMC V-8 V400 Eng. 1/2-1 Ton Truck, Travelall
IHC FBC401, RED401, RED401A, RED401B Eng. K1011, KB10, KBR, KBS, KR, KS8-10-11 Series
OHV IHC V-8 V401, VS401 & UV401 Eng. ACO, CO,
COF, F, T, V, VCO, VF, VT, 193RC, 1900-2000 Series
OHV IHC V-8 MV404 Eng. C1710, CO1800, F17001800, 1600-1800 Series
IHC R406, RED406, U406 Eng. C405L, CO, COF, COT;
F, FC; LF, R, RC, RF, RT, T, V, 1850-2000 Series
IHC/Navistar 6.9L D421 Diesel Eng. CO1650B, M1600,
1654, 1753 Series
1988-02
N-7B
J-1
OHV IHC BD264, BG264, U264, SD264, BG265 Eng.
1/2 - 1 Ton, A-AMC, B-BD100, CO1600, F1700-1800,
MC1600-1700, R1700-05, RC160, S100-1700, SC160180, SM160, 1000-1500, 1600-1800 Series Truck
OHV IHC V-8 V266 Eng. AM160-170, B, BC, C, CO, M,
MA, MC, 500-1703 Series Truck
IHC D301 & DT301 Diesel Eng. 1600, 1603 Series
"
N-7
IHC/Navistar 7.3L Diesel & Turbo Diesel incl. I.D.I. (94
only) Eng. CO1650B, M1400, M1600, 1452SC, 1652SC,
1652UPS, 1654, 1654LP, 1753, 3700, 4600 Series
36
IN-11
IN-14
IN-3
IN-11
IN-19
IN-3
IN-3
IN-11
N-9
IN-3
IN-10A
IN-17
IN-17R2
IN-3
IN-19
IN-17
IN-17R2
IN-19
IN-17
IN-17R2
Hi Perf
(1/2-Full Shell)
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
6 cyl 446ci
7.3L
4.125
1975-81
IHC MV446 Eng. C1710, CO1800, F1700-1800, 16001800 Series
450ci
7.4L
4.375
1954-74
8 cyl 461ci
7.6L
4.125
1960-73
6 cyl 464ci
7.6L
4.438
1968-71
466ci
7.6L
4.300
1975-83
8 cyl 478ci
7.8L
4.500
1965-77
6 cyl 501ci
8.2L
4.500
1960-74
8 cyl 522ci
8.5L
4.500
1974
IHC R450, RED450, RED450A, RED450B, RED450C,
RED450D, RED450U Eng. C405L, CO, COF, COT, F,
FC, K, KBR, KBS, KS8-11, L, LF, M, MB, R, RC, RF, RT,
T, 210-2000 Series
IHC V461, VS461, UV461 Gas (60-64) & DV462,
DV462B Diesel (66-73) Eng. ACO, ACOF, COF1910A4000, F200, M, MB, V, VCO, VCOF, VF, VT, 193RE,
210-230 Series
OHV Cummins Diesel & Turbo Diesel C160-C180 Eng.
DCO200, M412CBE, M623CBE, RD, RDF190-200 Series
IHC D466, DT466, DT466B, DT466C, DTA466C,
DT1466B, DT1466C Diesel Eng. CO1800-1950B,
F1853S-2050A, F5000-5050SF, 1850-5100 Series
IHC V478, VS478 Eng. CO, COF, COT, F, T, V, VCO,
VCOF, VF, VT, 193RC, RE; 210-2000 Series
IHC R501, RD501, RED501, U501 Eng. C405L, CO,
COF, COT, F, FC, M, MB, R, RF, RT, T, 210-2000 Series
OHV Caterpillar 1145, 1150 Diesel Eng. IHC Truck:
CO1850B, CO & COF1950B Cargostar
IHC V537, VS537 Eng. CO1900, F2000, 1900-2000
Series
IHC FTV549, FTVS549, V549, VS549, VT549, UV549,
9.0L Diesel Eng. ACO, ACOF, CO, COF, COT, F, M,
MB, RF, T, V, VCO, VCOF, VF, VT, 193RC, RE, 2102000 Series
IHC DV550, DV-B550, D551 Diesel Eng. 1654-1955S,
CO1950B, F1853S, F1954S Series
IHC DVT573, DVTI 573 Series Eng. CO, COF4000D,
COF4070, A Transtar; DC, DCF400 Series
OHV Caterpillar 1150, 3150 Diesel Eng. IHC Truck:
CO1850B, CO & COF1950B Cargostar
IHC C605, V605 Eng. CO1900, F2000, COF-1910B
Cargostar, 2010, 2125S, 2524S, F2010A Fleetstar,
F25-2624S, 1900-2000 Series
OHV Caterpillar 1160, 3208 (early & late) Diesel Eng.
1754S, 1853, 1853S, 1854, 1854S, 1954, 1954S, 1955,
1955S, 2155S, 2554S, CO1850B, CO, Cargostar, 1850F1850 Loadstar, COF1950B, 2050A-F2050A Fleetstar,
5050-F5050, SF Paystar Series
OHV Cummins Diesel NH-NHE180, NHE195, NH220
small cam series Eng. IHC CO, COF-COT4000D, 4070A
Transtar, DCOF195H, 205H; D, DF400; F2000D Fleetstar,
F210D, 2000D-T2000D Fleetstar, 210D (small cam
series)
OHV Cummins Diesel HRF6B Series Eng. 2 1/2 inch
big cam series, 3/32 wall. See applications above.
IHC V800 Eng. CO, COF4000D, COF4070, A Transtar;
DC, DCF400 Series
"
"
"
537ci
8.8L
4.625
1977-81
"
549ci
9.0L
4.500
1961-79
"
551ci
9.0L
4.510
1980-88
"
573ci
9.4L
4.500
1968-71
1974
"
605ci
9.9L
4.625
"
636ci
10.4L
4.500
1973-81
6 cyl 743ci
12.2L
5.125
1968-71
743ci
12.2L
5.125
8 cyl 800ci
13.1L
5.313
"
37
IN-17
IN-17R2
IN-3
IN-10A
CU-5A
IN-19
IN-10A
IN-3
CAT-2
IN-10A
IN-10A
IN-10A
IN-20^
CAT-2
IN-10A
CAT-2
CU-5A
CU-9
IN-20^
Hi Perf
(1/2-Full Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
OHC REPAIR
Bore
Standard
Hi Perf
(1/2-Full Shell)
6 cyl 855ci
14.0L
5.500
1968-83
855ci
14.0L
5.500
1977-ON
6 cyl 927ci
15.2L
5.500
1973-74
"
OHV Cummins Diesel NH-NHC230, NH-NHC250,
NHCT-CT, NHCT270, NTA370, NTC270-NTC400, PT270
Eng. CO, COF, COT, F, T, 210D, 2000D, 2070A,
2275S, 2574S, 2575S, 2674S, 4170, 4370, 5070 (small
cam series)
2 1/2 in big cam series 3/32 wall. (See applications
above)
OHV Cummins Diesel Super 250 Eng. IHC CO, COF,
F2070A-5070, 2070A, 4370, 5070 Series
CU-5A
CU-9
CU-5A
INFINITI (ALSO SEE NISSAN)
6 cyl
3.0L
2960cc 87mm
1990-93
SOHC VG30 E Nissan/Infiniti Eng. Infiniti M30
NIA-3L*
(Cam brgs for left bank)
(Full Round)
NIA-3R*
(Cam brgs for right bank)
(Full Round)
ISUZU (ALSO SEE GENERAL MOTORS)
4cyl 80.8ci
"
89.7ci
1.3L
1325cc 75mm
1966-72
SOHC Isuzu G130 Eng. (Aux shaft set)
CHG-14**
1.5L
1471cc 3.030
1969-70
SOHC Isuzu G150 Series 4XC1, 4XC1T (Turbo) Eng.
Isuzu I-Mark. (Aux shaft set)
OHV Isuzu G161 Eng. Isuzu I-Mark. (Aux shaft set)
CHG-14**
(77mm)
"
96.6ci
1.6L
1584cc 82mm
1966-79
"
110.8ci
1.8L
1817cc 3.310
1969-88
(84mm)
CHG-14**
MIA-1*
SOHC Isuzu G180, G180S, G180SS, G180Z Gas Eng.
Isuzu I-Mark, Pick-up
(1/2 Shell)
MIA-2*
(Cam brg set w Heavy wall, .020 oversized OD)
(1/2 Shell)
(Aux shaft set)
"
110.8ci
1.8L
1817cc 3.310
"
119ci
2.0L
1949cc 3.430
1977-88
SOHC Isuzu 4FB1 Diesel Eng. Isuzu I-Mark, Pick-up
1979-89
SOHC Isuzu G200, G200W, G200Z Gas Eng.
Isuzu Impulse, Pick-up, Trooper
CHG-14**
IZ-1^
(84mm)
(87mm)
MIA-1*
(1/2 Shell)
MIA-2*
(Cam brg set w Heavy wall, ..020 oversized OD)
(1/2 Shell)
(Aux shaft set)
"
2.0L
"
"
134ci
1951cc 86mm
CHG-14**
IZ-2^
1968-79
OHV Isuzu G201 Gas Eng.
1972-88
OHV Isuzu C 190 Diesel Eng. Truck & Industrial
IZ-3^
IZ-4^
2.0L
1991cc 83mm
1969-90
OHV Isuzu C 201 Diesel Eng. Truck & Industrial
2.2L
2189cc 3.504
1996-00
CH-19
"
2.2L
2207cc 83mm
1964-79
OHV Type G, 4 Chevrolet / Isuzu 2.2 Type LN2 Eng.
Isuzu Hombre, Truck
OHV Isuzu C220, C221 Diesel Eng. Truck & Industrial
"
2.2L
2238cc 3.460
1981-82
OHV Isuzu C223 Diesel Eng. Isuzu Pick-up, Trooper II
IZ-2^
1983-89
C223, LQ7, LW7 Diesel, C223T-Turbo Diesel (84-88)
Eng. Isuzu Pick-up, Trooper II
SOHC Isuzu 4ZD1, LW3 Gas Eng. Isuzu Impulse,
Pick-up, Amigo, Trooper II
IZ-3^
(89mm)
IZ-2^
(88mm)
"
2.3L
2254cc 3.520
(89.3mm)
1985-95
(Cam brg set w heavy wall, .020 oversized OD)
MIA-1*
(1/2 Shell)
MIA-2*
(1/2 Shell)
38
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
ISUZU (CONT'D)
4cyl 144.6ci
"
2.4L
2369cc 86mm
1969-88
OHV Isuzu C240 Diesel Eng. Truck & Industrial
IZ-2^
2.5L
2499cc 93mm
1985-90
OHV Isuzu 4JA1 Diesel Eng. Truck & Industrial
IZ-5^
2.6L
2559cc 3.640
1988-97
SOHC Isuzu 4ZE1, RLJ Gas Eng. Isuzu Pick-up,
Amigo, Rodeo, Trooper II
(92.6mm)
MIA-1*
(1/2 Shell)
MIA-2*
(Cam brg set w heavy wall, .020 oversized OD)
(1/2 Shell)
IZ-5^
1973-76
OHV Isuzu 4JB1 Diesel, 4JB1T-Turbo-Diesel Eng.
Truck & Industrial
OHV Isuzu 4BA1 Diesel Eng. Truck & Industrial
1977-90
4BA1 Diesel. Truck & Industrial
IZ-7^
1989-92
OHV V-6 Chevrolet Type LL2 Eng. Isuzu Trooper II
"
2.8L
2772cc 93mm
1985-90
"
2.8L
2775cc 98mm
6 cyl 173ci
2.8L
2835cc 3.504
(89mm)
"
189ci
3.1L
3135cc 3.504
1991-96
OHV V-6 Chevrolet Type LG6, CPC Eng. Isuzu Pickup,
Rodeo
(89mm)
IZ-6^
CH-18
CH-18A
CH-18
CH-18A
IZ-7^
4cyl
3.3L
3268cc 102mm
1979-88
OHV Isuzu 4BC1, 4BC2 Diesel. Truck & Industrial
"
3.6L
3595cc 102mm
1973-76
OHV Isuzu 4BB1 Diesel Eng. Truck & Industrial
IZ-6^
"
3.6L
3595cc 102mm
1977-90
4BB1 Diesel. Truck & Industrial
IZ-7^
"
3.9L
3856cc 102mm
1980-95
IZ-7^
4.3L
4300cc 4.000
1996-99
OHV Isuzu 4BD1, 4BD1N Diesel, 4BD1T, 4BD2TC Turbo Diesel Eng. Truck & Industrial
OHV Chevrolet V-6 Type LB4, LF6-Hi Output X Series
Eng, (all models except T series). Isuzu Hombre,
Truck & Industrial
6 cyl 262ci
"
262ci
4.3L
4300cc 4.000
1996-98
OHV Chevrolet V-6 Type LB4, LF6 "T" Eng, (I.D.#
CH-17
CHP-17 or
CHP-17T
(Coated)
CHG-15**
CH-21
starting w "T" located on front of block). Same applications
"
5.0L
4978cc 98mm
1970-88
above
OHV Isuzu D500 Diesel Eng. Truck & Industrial
IZ-8^
"
5.4L
5393cc 102mm
1972-90
OHV Isuzu 6BB1 Diesel Eng. Truck & Industrial
IZ-8^
5.7L
5736cc 4.000
1993-99
OHV Chevrolet V-8 Vin Type CPC Code G, H, K, L, M,
P, R, T, V, X, Y, 4, 6, 7, 8 engs incl. Hi Perf, Vortex &
Aluminum blocks except DOHC Eng. Isuzu Truck &
Industrial
Options:
CH-8
8 cyl 350ci
(Coated)
CH-4A
CHP-8R1
CHP-8R2
CHP-8R3
CHP-8R4
6 cyl
5.8L
5785cc 102mm
1976-90
"
6.1L
6130cc 102mm
"
6.5L
6494cc 105mm
IZ-8^
1979-90
OHV Isuzu 6BD1 Diesel, 6BD1T-Turbo-Diesel Eng.
Isuzu Truck & Industrial
OHV Isuzu 6BF1 Diesel Eng. Isuzu Truck & Industrial
IZ-8^
1984-88
OHV Isuzu 6BG1 Diesel Eng. Isuzu Truck & Industrial
IZ-8^
39
CHP-8 or
CHP-8T
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
JAGUAR
6 cyl
2.5L
2483cc 83mm
1955-67
DOHC Jaguar Eng. Mark I-II
JA-1*^
"
3.4L
3442cc 83mm
1948-67
JA-1*^
"
3.8L
3781cc 87mm
1958-67
DOHC Jaguar Eng. Mark II, VII, VIII, XK120, XK140,
XK150
DOHC Jaguar Eng. Mark II, IX, X, XK150, XKE Series
"
4.2L
4235cc 92mm
1964-93
DOHC Jaguar Eng. Mark X, XJ6, XJS, XKE Series
JA-1*^
JA-1*^
JEEP (ALSO SEE AMERICAN MOTORS & CHRYSLER)
4 cyl 134ci
2.2L
3.125
1953-73
1941-68
3.875
F-25
IZ-2^
"
141.5ci
2.3L
"
144.6ci
2.4L
2369cc 86mm
1981-86
OHV Isuzu C240 Diesel Eng. Truck & Industrial
"
150ci
2.46L
3.875
1983-00
"
150ci
2.5L
3.313
1966-67
OHV Jeep/Chrysler/AMC Type E, H, P, U Eng. Jeep
Cherokee, CJ, DJ, YJ, Commanche, Pick-up, Scrambler,
Sportwagon, Wagoneer, Wrangler
Continental Eng. Truck & Industrial
"
151ci
2.5L
4.000
1980-83
6 cyl 173ci
2.8L
2835cc 3.504
1984-86
(89mm)
"
225ci
3.7L
3.750
1965-71
"
226ci
3.7L
3.313
1952-54
1947-63
"
232ci
3.8L
"
241ci
4.0L
3.750
1965-78
3.875
1987-99
(98.4mm)
OHV Pontiac Type B Eng. Jeep CJ, DJ, Pick-up,
Scrambler
OHV Chevrolet V-6 2.8L W Type LL2 Eng. Jeep
Cherokee, Commanche, Sportwagon, Wagoneer
OHV BUICK V-6 Type HC, MH, NH, SF, SH Eng. Jeep
CJ, DJ, Gladiator, Truck & Utility, Wagoneer
Willys/Jeep 226 F-Head (Hurricane) Eng. Willys
Pick-up, Truck & Utility
Willys/Jeep 226 L-Head (Lightning) Eng. Willys, KaiserFrazier Pick-up, Truck & Utility
OHV AMC/Chrysler Hi-Torque Type A, E, 1L, 3L, 8L,
9L Eng. Jeep CJ, DJ, Gladiator, Truck& Utility,
Wagoneer
OHV AMC/Chrysler Eng. Cherokee, Comanche,
Sportwagon, Wagoneer, Wrangler, YJ Series
"
258ci
4.2L
3.750
1971-90
OHV AMC/Chrysler Type C, M, T Eng. Cherokee, CJ,
DJ, Comanche, Scrambler, Truck & Utility, Wagoneer,
Wrangler, YJ
8 cyl 304ci
5.0L
3.750
1971-81
OHV AMC/Chrysler V-8 Type H, N, P Eng. CJ, DJ,
Pick-up, Scrambler, Truck & Utility
OHV Chrysler V-8 Type Y Eng. Jeep Grand Cherokee
(Special brg set w O.D. groove in #2 & 3 pos.)+J2149
"
318ci
5.2L
3.910
1993-99
"
327ci
5.3L
4.000
1965-70
"
350ci
5.7L
3.800
1968-71
J-1
Willys/Jeep 134 F-Head (Hurricane) Eng. CJ, DJ,
Truck & Utility
Willys/Jeep 134 L-Head (Lightning) Eng. CJ, DJ,
Henry J, Truck & Utility
Willys/Jeep 141.5 L-Head Eng. Military Standard Jeep
N-7
CO-3
CH-16
CH-18
CH-18A
B-6
K-1
N-7
N-7
N-7B
N-7
N-7B
N-9
PD-25
PDP-25 or
PDP-25T
(Coated)
OHV AMC/GM V-8 (Vigilante) Type E Eng. Truck &
Utility, Wagoneer
OHV Buick V-8 Type Y Eng. Jeep Grand Cherokee
H-5
B-9
BP-9 or
BP-9T
(Coated)
40
(1/2-Full Shell)
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
PD-25
PDP-25 or
PDP-25T
JEEP (CONT'D)
8 cyl 360ci
5.9L
4.000
1998-01
OHV Chrysler V-8 Type Z Eng. Jeep Grand Cherokee,
OHV AMC/Chrysler V-8 Type N, P, 7 Eng. Jeep
Cherokee, Pick-up, Truck & Utility, Wagoneer
OHV AMC Type Z Eng. Jeep Cherokee, Pick-up,
Truck & Utility, Wagoneer
(Coated)
"
360ci
5.9L
4.080
1970-93
"
401ci
6.6L
4.165
1974-78
N-9
N-9
JOHN DEERE
2 cyl 100ci
1.6L
4.000
113ci
1.9L
3.250
1956-60
4 cyl 115ci
1.9L
3.500
1961-71
1961-71
"
"
145ci
2.4L
3.625
"
155ci
2.5L
3.625
"
162ci
2.6L
3.438
"
165ci
2.7L
3.875
"
188ci
3.1L
3.750
"
198ci
3.3L
3.750
"
201ci
3.3L
4.000
4 cyl 202ci
3.3L
3.859
1961-71
1966-75
John Deere Type M, 40, 320,330,435 Eng. CrawlerTractor: M, MC, MCT, MI, MT, 40-40U Series
John Deere 113 Series Type 420, 430, 440 Eng.
Crawler-Tractor: 420, 430, 430C, 440 Series
John Deere 1010 Series Type 115, JD115 Gas Eng.
Combine-Tractor: EA, 115G, HA 115G, HB 115, 115G,
GH, NA 115G
John Deere 2010 Series Gas & Diesel Eng. CombineTractor: EA 145G, HA 145, 145G, HB145, 145G,
HC 145G, L, TA 145G, L
John Deere HA155D Series Diesel Eng. CombineTractor, Power Unit: 45, 155
Continental F162 Series Eng. Combine: No. 8
JD-5^
John Deere 2010 Series Gas & Diesel Eng. CombineTractor: 40, 45, HA 165G, HB 165D, HB 165G
Hercules JX4C3 Series Eng. Combine-Tractor: 45
JD-1
OHV Hercules DD-198, DOOB, D2000 Series Eng.
Combine: No. 5, 10-12" Cut
John Deere 3010 Series 201G Gas & LPG Eng.
Loader/Tractor: 500C, 510, JD500
John Deere 4-202D Diesel, 4-202G Gas & LPG Series
Eng. 45, 3300, 4400 Series Combine; JD480A Series
Forklift; 310, 401, 410 Series Loader; 499 Series Picker/
Stripper; 202 Series Power Unit; 400-2520 Series
Tractor; 880, 2270, 2280 Series Windrower
JD-5^
JD-1
JD-1
JD-1
CO-8
HE-1
HE-1
JD-3
JDG-7**
(Balance Shaft set)
(.078 oversized O.D. Balance Shaft set)
6 cyl 217ci
3.6L
3.625
4 cyl 219ci
3.6L
4.020
1966-75
John Deere EA, HA217G & L, HB217L, HC217, G, L,
HD217, G, L, HG217G, NA217G, NA217L, NB217G,
NB217L, TA217G, L, N, 217 Gas Eng. & Power Unit.
Combine: 55, 55R, 65, 67R, 90, 95, 95H, 95R
Forage Harvester: 12 Series
John Deere 4-219D, 4-219T Series Diesel Eng. 3300,
4400 Series Combine; JD 310, 401, 410 Series Loader;
219 Series Power Unit; 440-2420 Series Tractor
JDG-7R**
JD-2
JDG-7**
(Balance Shaft set)
"
222ci
3.6L
3.375
"
225ci
3.7L
3.400
1960-78
"
225ci
3.7L
3.400
1979-87
Hercules QXC Series Eng. Combine: No. 5A,
No. 9 Prairie, No.35 Hillside, 55, 55R, 65
OHV Dodge/Chrysler Slant 6 Eng. (incl. early series w
forged crankshaft). John Deere Industrial/Power Unit
OHV Dodge/Chrysler Slant 6 Eng. (incl. late series w
cast crankshaft.) John Deere Industrial/Power Unit
41
JDG-7R**
HE-5
PD-18
PD-21
(1/2-Full Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
JOHN DEERE (CONT'D)
4 cyl 226ci
3.7L
4.000
227ci
3.7L
4.250
6 cyl 230ci
3.8L
3.438
232ci
3.8L
3.875
4 cyl 239ci
3.9L
4.188
"
"
1966-75
Hercules DOOC, DD-G0226, D-G2300 Series Eng.
No. 5A, No.35 Hillside
John Deere 3020 Series 4227G-Gas & 4227LP-LPG
Eng. Tractor: JD500, JD500B, JD510
Hercules QXD-3 Series Power Unit. Combine: No. 5A,
No. 9 Prairie, No.35 Hillside, 55, 55R, 65
John Deere HA232D Series Diesel Eng. Combine 95,
95H
John Deere 4-239D, 4-239T, 4039, 4239D Series Diesel
& Turbo Diesel Eng. 4239 Series Tractor
HE-1
JD-3
HE-5
JD-2
JDG-7**
(Balance Shaft set)
"
241ci
3.9L
4.125
6 cyl 248ci
4.1L
3.875
4 cyl 254ci
4.2L
4.125
"
270ci
4.4L
4.250
"
276ci
4.5L
4.190
6 cyl 282ci
4.6L
3.750
John Deere 4241G Gas Eng. Loader: 500C, JD500,
510, 3010, 3020
John Deere Series BA248G, HA 248G, HB248G, L, NA
248G, 248 Power Unit/Diesel Eng. Combine: 95, 95H
John Deere 4254D Diesel Eng. Loader: 500C, 510
Tractor: JD500A, 3010
John Deere 4270D Diesel Eng. Loader: JD500,
JD500A, B, C, JD510 Series. Tractor: 3020 Series
John Deere 4045D, T, 276D, 4276D, 4276T Diesel &
Turbo Diesel Eng. JD550 Series Crawler; 440C, 540,
555 Series Loader; 4276D, T Series Power Unit; 2630,
2640, JD440C, JD540 Series Tractor (Balance Shaft set)
"
302ci
4.9L
4.000
"
329ci
5.4L
4.015
"
340ci
5.6L
4.250
"
359ci
5.9L
4.190
"
360ci
5.9L
4.250
"
381ci
6.2L
4.125
"
404ci
6.6L
4.250
"
466ci
7.6L
4.563
"
466ci
7.6L
4.563
"
531ci
8.7L
4.750
"
619ci
10.1L
5.125
Hercules JXC, JXCT Series Eng. No. 17, 12-20" Cut,
No.36- 36A- 36B-36H-36P all 12-20" Cut
John Deere Series 4010 Gas Eng. Combine: 105,
Wheel Tractor: 4000, 4010, 4020, 4230
John Deere HF329G, NB329 Series, 329DH-GH-GNLN, 6329D, 6329G, 6329T Diesel & Turbo-Diesel Eng.
John Deere 340, 341, HA341G, HG341G LPG & Gas
Eng. Combine: 105, 105R Tractor: JD600, 4020 Series
John Deere 6359D, 6359G, Gas & Diesel Eng.
Tractor: 2940 Series
John Deere M21HA, 362GH-01, 02; 362GHA, 720, 730
Gas & Diesel Eng.
John Deere 6381D Series Diesel Eng. Power Unit:
4010. Tractor: JD600-690, 4010 Series
John Deere M23HA, 404D, 404DH-01, 02; 404DHA,
6404D, DH, TH Diesel Eng. Combine: 105-7700 Series
Loader/Tractor: 4000-4520 Series; JD600-JD690A
Series
John Deere 466, 6466A, 6466D, 6466T, 6466TA,
6466TH Diesel & Turbo-Diesel Eng. Combine: 66028820 Tractor: 790-4850 Series
John Deere 6076D, 6076T, 6076A, 6076H Diesel &
Turbo-Diesel Eng.
John Deere 531, 6531D Diesel & Turbo-Diesel Eng.
Harvester: 5010-5460 Tractor: JD644C-JD772A
John Deere 619, 6619A, 6619TA Diesel & Turbo/InterCooled Diesel Eng. Tractor: JD850-890; 5440-8650
42
JDG-7R**
JD-3
JD-2
JD-3
JD-3
JDG-7**
JDG-7R**
HE-1
JD-4
JD-4
JD-4
JD-4
JD-4
JD-4
JD-4
JD-4
JD-6
JD-4
JD-4
Hi Perf
(1/2-Full Shell)
YEAR
cu.in
Cyl
L
cc.
Bore
OHC REPAIR
Standard
KAISER FRAZER (SEE JEEP)
KIA
KOMATSU
6 cyl 743ci
"
855ci
12.2L
5.125
Cummins/Komatsu NH220 Small Cam Series Diesel
Eng. Komatsu Machine Models D60, D65, D75,
D80A-12, D85A-12. O.E.Cam Brg # BM27253
CU-5A
14.0L
5.500
Cummins/Komatsu NT855 Small Cam Series Diesel
Eng. Komatsu Machine Models D80A-18, D85A-18,
D95S-2. O.E.Cam Brg # BM27253
CU-5A
LANDROVER (SEE ROVER)
LASER (SEE CHRYSLER/FORD)
LEMANS (SEE GM PRODUCTS)
LE ROI
4 cyl 176ci
2.9L
3.750
Early D Model Eng. D176
A-2
"
201ci
3.3L
4.000
A-2
"
226ci
3.7L
4.000
A-2
6 cyl 382ci
6.2L
4.500
60 G1 Eng.
A-2
LEXUS (SEE TOYOTA)
LINCOLN (SEE FORD)
MACK TRUCK
4 cyl 98ci
1.6L
3.125
Continental Eng. Mack Truck/Industrial
CO-8
"
113ci
1.9L
3.000
CO-8
"
123ci
2.0L
3.125
CO-8
"
133ci
2.2L
3.250
CO-8
"
140ci
2.3L
3.188
Continental L Head Eng. Mack Truck/Industrial
CO-8
"
145ci
2.4L
3.250
CO-8
6 cyl 209ci
3.4L
3.188
1936-48
Mack (Continental) EN-11 Eng. Mack Truck/Industrial
K-1
Mack (Continental) EN-12, EN226 Eng. Mack TruckIndustrial
Mack (Continental) EN-253, FO Series Eng. Mack
Truck/Industrial
K-1
"
226ci
3.7L
3.313
1939-42
"
253ci
4.1L
3.500
1950-55
43
CO-7^
Hi Perf
(1/2-Full Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
OHC REPAIR
Bore
Standard
Hi Perf
MACK TRUCK (CONT'D)
6 cyl 271ci
4.4L
3.625
"
290ci
4.8L
3.750
"
330ci
5.4L
4.000
8 cyl 413ci
6.7L
4.188
6 cyl 672ci
11.0L
4.875
Mack (Continental) EN-271, FK, FM Series Eng. Mack
Truck/Industrial
Mack (Continental) EN-290, FK, FM Series Eng. Mack
Truck/Industrial
Mack (Continental) EN-330, EN-331 Series Eng. Mack
Truck/Industrial
OHV V-8 Chrysler-Mack EN-414, EN414A Series Eng.
Mack Ind. Power Units
CO-7^
CO-7^
CO-7^
PD-17
PDP-17 or
PDP-17T
(Coated)
Cummins/Mack EN-END-ENDS672, END673, ENDT673,
(Early Eng. w slotted brg in #2 & #5 pos). Mack Truck/Ind.
MA-5^
MAG-10**^
MA-7-1WS^
Cummins/Mack END673,END675,END676,ENDL-ENDLT,
MA-6
(Aux. Shaft Set)
Cam Thrust Washer Set (Includes (2) SH-566W and dowel pins.
"
672ci
11.0L
4.875
Before
4/84
ENDT673, (Engs. after ser. #ENDT-673-62-63), END675,
ENDT-ENDTB676, ETAB673, ETAB675, ETAB676,
ETAY-ETAZ673, ENTAZ675, ETB-ETC-ETS673,
ETSZ676, ETSZ677, ETSZB676, ETSZB677,
ETY-ETZ673, ETZ675, ETZB673, ETZB675 (For early
Engs. before 4/84 w #7 journal of 2.25" dia. w 1 1/2"
groove on brg #2-6)
(Aux. Shaft Set)
"
672ci
11.0L
4.875
"
680ci
11.0L
4.875
4/84-on
For late Engs. after 4/84 w #7 journal of 2.44" dia.
(Aux. Shaft Set)
Mack E6 Series, EM6 Series, (For early Engs. using
slotted brgs in #2 & #5 positions) Mack Truck/Ind.
(Aux. Shaft Set)
"
680ci
11.0L
4.875
Before
4/84
For early Engs. before 4/84 w #7journal of 2.25" dia.
with 1-1/2" groove for brgs # 2 - 6
(Aux. Shaft Set)
"
680ci
11.0L
4.875
4/84-on
For late Engs. after 4/84 w/ #7 journal of 2.44" dia.
(Aux. Shaft Set)
"
707ci
11.6L
5.000
Mack END707, ENG-ENDD-ENDDL711, ENDL707,
ENDL-ENDLT711, ENF707. (For early Engs. using
slotted brgs in #2 and #5 positions) Mack Truck/Ind
(Aux. Shaft Set)
"
707ci
11.6L
5.000
Before
4/84
For early Engs. before 4/84 w #7 journal of 2.25" dia.
w 1 1/2" groove on brgs # 2-6
MAG-10**^
MA-7-1WS^
MA-7
MAG-10**^
MA-5^
MAG-10**^
MA-7-1WS^
MA-6
MAG-10**^
MA-7-1WS^
MA-7
MAG-10**^
MA-7-1WS^
MA-5^
MAG-10**^
MA-7-1WS^
MA-6
761ci
12.5L
4.875
Mack E7 Series, E7-350, E7-400 Eng. Mack Truck/Ind
MAG-10**^
MA-7-1WS^
MA-7
MAG-10**^
MA-7-1WS^
MA-8
8 cyl 864ci
14.2L
5.250
Mack END864, ENDD864,ENDT864 Eng. Mack Truck
MA-9
14.2L
5.250
Mack END-ENDDT-ENDT-ENDTB865, END-ENDDTENDT-ENDTB866 Series Eng. Mack Truck/Ind
MA-9
(Aux. Shaft Set)
"
707ci
11.6L
5.000
4/84-on
For late Engs. after 4/84 w #7 journal of 2.44" dia.
(Aux. Shaft Set)
"
"
866ci
44
(1/2-Full Shell)
YEAR
Cyl
cu.in
L
cc.
OHC REPAIR
Bore
Standard
Hi Perf
(1/2-Full Shell)
MASSEY FERGUSON (SEE ENGS. LISTED UNDER CONTINENTAL,
CHRYSLER, GMC, HERCULES)
MAZDA
4 cyl 71.3ci
"
1169cc 70mm
1968-73
1.3L
1290cc 3.071
1990-92
DOHC Mazda BJ Eng. Mazda Passenger Cars
MZA-1*
(Full Round)
1966-74
(1 set per cam)
SOHC Mazda UB Eng. Mazda Passenger Cars
F-41
1970-81
SOHC Mazda NA Eng. Mazda 616, 808, B1600 Truck
F-41
1982-88
SOHC Mazda F6 Eng. Mazda Passenger Cars
(78mm)
"
90.6ci
F-41
1.2L
1.5L
1490cc 3.071
Mazda TA, TB Series Eng. Madza 1200
(78mm)
"
96.8ci
1.6L
1586cc 3.071
(78mm)
"
1.6L
1587cc 81mm
MZA-2*
(1/2 Shell)
"
1.6L
1597cc 3.071
1986-94
MZA-1*
SOHC Mazda B6 Eng. Mazda MX-3, 323, 323SE
(78mm)
"
107.9ci
1.8L
1769cc 3.150
(Full Round)
1973-88
SOHC Mazda VC Eng. Mazda Passenger Cars
1982-89
SOHC Mazda F8 Eng. Mazda Passenger Cars
F-41
(80mm)
"
1.8L
1789cc 86mm
MZA-2*
(1/2 Shell)
"
109.6ci
1.8L
1796cc 3.071
1970-78
SOHC Mazda VB Eng. 618, 626, B1800 Truck
1990-94
SOHC Mazda BP, BP012 Eng. Protégé DX, SE, LX/4WD
F-41
(78mm)
"
1.8L
1839cc 3.270
MZA-1*
(83mm)
6 cyl
1.8L
4 cyl 121.2ci
2.0L
1844cc 83mm
1970cc 3.150
(Full Round)
1992-94
1978-89
DOHC V-6 Type K8, K8ZE Eng. Mazda MX-3 GS
(1 set per cam)
SOHC Mazda MA Eng. Mazda 626, B2000 Truck
MZA-1*
(Full Round)
F-41
(80mm)
MZ-1^
"
2.0L
1985cc 82mm
1971-79
OHV Mazda VA Eng. Mazda Passenger Cars
"
2.0L
1998cc 86mm
1983-88
SOHC Mazda FE, FEH1, FEH5 incl. FE-T (Turbo) Eng.
Mazda 626, B2000 Truck
SOHC Mazda F2, F2G, F2L incl. F2-T (Turbo) Eng.
Mazda MX-6, 626, B2200, B2200i Truck
SOHC Mazda/Ford 2.3 Series A, 8A Eng. Mazda
B2300 Truck
"
"
2.2L
140ci
2.3L
2184cc 86mm
2302cc 3.780
1983-93
1994-97
(Aux shaft set)
"
2.6L
2555cc 3.590
1987-90
MZA-2*
(1/2 Shell)
MZA-2*
(1/2 Shell)
F-34
F-34B
F-34S
FG-34**
MIA-1*
SOHC Mitsubishi G54B Eng. Mazda B2600 Truck
(91.1mm)
(1/2 Shell)
MIA-2*
(Balance shaft set)
(Balance shaft set w .173 oversize OD)
"
2.6L
2606cc 92mm
1989-95
6 cyl 183ci
3.0L
2977cc 95mm
1977-84
3.0L
2982cc 3.503
1994-00
(89mm)
OHV Toyota/Mazda HA Series Diesel Eng. Mazda
Truck/Industrial
OHV Ford V-6 Vulcan Type U, 8U Eng. Mazda B3000
Truck/Industrial
45
(1/2 Shell)
MZA-4*
SOHC Mazda 12 valve G6, G60 Series Eng. Mazda
MPV Mazda Truck: B2600, B2600i, MPV Van
(Balance Shaft Set)
"
MIG-2**
MIG-2-1R**
MIG-2E**
(1/2 Shell)
MZG-3**
TO-14^
F-48
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
MAZDA (CONT'D)
6 cyl 244ci
4.0L
4015cc 3.952
1990-99
(100mm)
OHV Ford V-6 Series X, ZZL Eng. Mazda Truck/Van:
B4000, Navajo
(Cam brg set w special wide #4 brg)
F-50
F-50A
MERCEDES BENZ
6 cyl
5.7L
5675cc 97mm
1979-90
Daimler Benz OM352,OM352A (I and II Series) Eng.
DB-1^
MERCRUISER/MERCURY MARINE
4 cyl 224ci
3.7L
4.360
Ford 470, 470R Mercruiser/Mercury Marine Eng.
F-30
Metropolitan-Nash Series 1-4 Eng.
DA-2
(111mm)
METROPOLITAN-NASH
4 cyl 90.9ci
1.5L
1489cc
1956-61
MG (BRITISH LEYLAND LTD.)
4 cyl
1.1L
1098cc 64.5mm
1962-68
MG Midget, 1100
BL-1
"
1.3L
1275cc 70.5mm
1967-71
MG Midget, 1300
BL-1
"
90.9ci
1.5L
1489cc 73mm
1954-62
MGA, Magnette
DA-2
"
96.9ci
1.6L
1588cc 75.4mm
1959-61
MGA
DA-2
"
99ci
1.6L
1622cc 76.2mm
1961-62
MGA, Magnette
DA-2
"
109.8ci
1.8L
1798cc 80.2mm
1965-76
MGB, MGB-GT
DA-2
8 cyl 215.4ci
3.5L
3528cc 3.500
1973-76
OHV Buick V-8 Eng. British Passenger Cars
B-11
MILITARY STANDARD
4 cyl 124ci
2.0L
3.250
J.I. Case VAE (MOD) Eng.
CA-3
"
125ci
2.0L
3.250
Waukesha 180GB Eng.
WA-4
"
133ci
2.2L
3.250
Waukesha FCB-4 Eng.
WA-4
"
133ci
2.2L
3.250
Hercules IXB-ER Eng.
WA-3
134ci
2.2L
3.125
"
139ci
2.3L
3.438
Willys/Jeep 134 F-Head (Hurricane) Eng. M38A1,
M38A1C, M38A1E2, M38MC, M170 Jeep, Truck & Utility
Waukesha 180GM Eng.
WA-4
"
141ci
2.3L
3.875
Ford Eng. M 151 Mutt
F-25
"
145ci
2.4L
3.250
OHV Continental FS-45, FS-145 Eng.
CO-8
"
152ci
2.5L
3.875
IHC 4-152 & 4-152T, B-152 Eng. Scout & Commanche
IN-11
46
J-1
Hi Perf
(1/2-Full Shell)
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
MILITARY STANDARD (CONT'D)
BU-2
4 cyl 153ci
2.5L
3.438
Buda 4MB-153 Eng.
3 cyl 159ci
2.6L
3.875
Detroit Diesel 3-53, 3-53N Eng. Military Truck M561
4 cyl 162ci
2.7L
3.438
Continental FS-162 L Head Eng.
CO-8
6 cyl 186ci
3.1L
3.250
Waukesha 185GB Eng.
WA-4
DE-2**
"
209ci
3.4L
3.438
Waukesha 185GM Eng.
WA-4
"
217.8ci
3.6L
3.250
PD-1
"
218ci
3.6L
3.250
Chrysler L-Head Eng. Military/Dodge 100-500 Series
MX3029, M-37, M37B1, M-42, M-43, M43B1, M56,
M56B1, M56C, M201, M201B1, M506, M509, M601,
V41/GT Military Vehicle
Continental FS218 Series Eng.
"
218ci
3.6L
3.375
PD-3
4 cyl 226ci
3.9L
4.000
OHV Chrysler 6 cyl Industrial 905A Eng. MX3029,
M-37, M37B1, M-42, M-43, M43B1, M56, M56B1, M56C,
M201, M201B1, M506, M601, V41/GT Military Vehicle
Hercules JX4LD-ER Eng.
6 cyl 230ci
3.8L
3.438
Buda 6MB Eng.
BU-2
PD-1
K-1
HE-1
"
230ci
3.8L
3.250
"
237ci
3.9L
3.438
OHV Chrysler 6 cyl Industrial 931 Eng. MX3029,
M-37, M37B1, M-42, M-43, M43B1, M56, M56B1, M56C,
M201, M201B1, M506, M601, V41/GT Military Vehicle
Hercules QXLD-ER Eng.
8 cyl 239ci
3.9L
3.188
Flathead, L-Head V-8 Eng. Military Ford Truck: T-16
F-1
6 cyl 244ci
4.0L
3.438
Continental FS-244 Eng.
K-1
251ci
4.1L
3.438
Chrysler Industrial 908A Eng.
PD-3
8 cyl 283ci
4.6L
3.875
OHV Chevrolet V-8 Eng. GMC Military Truck & Van:
M114A1, M116, T114
CH-8
CHP-8 or
CHP-8T
302ci
5.0L
4.000
OHV Chevrolet V-8 Eng. GMC Military Truck & Van:
M207C
CH-8
CHP-8 or
CHP-8T
6 cyl 302ci
5.0L
4.000
CH-2
6 cyl 339ci
5.6L
4.000
OHV 6 cyl GMC Eng. GMC Military Truck & Van:
M50, M59, M84, M133, M135, M207, M207C, M211-222,
T59, XM474E2
Hercules JXLD-ER Eng.
8 cyl 361ci
5.9L
4.125
OHV Chrysler V-8 Eng. Military Dodge MD to HD (5001000) Series Truck & Ind. Power Units, Commando,
M106AT, M113, M410, M474E2, M546, M577, T122,
T257
OHV Ford V-8 Eng. HD Military Ford Truck: 750-1100
Series, 534GF Power Unit
PD-17
"
BU-2
(Coated)
"
(Coated)
"
534ci
8.8L
4.500
MINNEAPOLIS-MOLINE
47
HE-1
PDP-17 or
PDP-17T
(Coated)
F-16
(1/2-Full Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
MITSUBISHI
4 cyl
1.2L
"
1.2L
"
"
"
1.3L
86ci
89.6ci
1.4L
1.5L
1198cc 68.2mm
1244cc 69.5mm
1298cc 71mm
1410cc 74mm
1468cc 2.972
(Full Round)
1983-88 OHV Mitsubishi G11B, 4G11 Eng. Mitsubishi
Passenger Cars
(Full Round)
1984-88 SOHC Mitsubishi G13B, 4G13 Eng. Mitsubishi
Passenger Cars
(Full Round)
1983-88
1984-96
(75.5mm)
"
1.6L
1597cc 76.9mm
MIA-3*
1984-88 SOHC Mitsubishi G16B, 4G16 Eng. Mitsubishi
Passenger Cars
1971-89
MIA-3*
MIA-3*
MIA-3*
SOHC Mitsubishi G12B, 4G12 Eng. Mitsubishi
Passenger Cars
(Full Round)
SOHC 8 valve Mitsubishi G4AJ, G4DJ, G15B, 4G15
Eng. Mitsubishi Mirage, Precis
(Full Round)
MIA-3*
MIA-1*
SOHC Mitsubishi G32B, 4G32 & 4G32T, G32B-T
(Turbo) Eng. Mitsubishi Mirage, Precis
(1/2 Shell)
MIA-2*
(1/2 Shell)
"
1.8L
1795cc 3.170
1978-88
(80.6mm)
MIA-1*
SOHC Mitsubishi G62B, 4G62 & 4G62T, G62B-T(Turbo)
& Diesel Eng. Mitsubishi Cordia, Tredia
(1/2 Shell)
MIA-2*
(1/2 Shell)
"
1.9L
1855cc 81mm
1973-78
"
2.0L
1995cc 84mm
1973-88
Passenger Cars (Aux shaft set)
Passenger Cars
(Balance shaft set)
"
2.0L
1997cc 3.350
1980-94
SOHC 8 valve Mitsubishi G63B, 4G63 Eng. Mitsubishi
Cordia, Galant, Space Wagon, Tredia. Mitsubishi
Truck: Mighty Max, Montero S (Balance shaft set)
1989-98
DOHC 16 valve Mitsubishi G63B, 4G63 and G63BT,
4G63T (Turbo) Eng. Mitsubishi Eclipse, Galant & VR4,
(85mm)
"
2.0L
1997cc 3.350
(85mm)
MIG-2**
MIA-4*
(1/2 Shell)
MIG-2**
MIG-2-1R**
MIG-2E**
MIG-3**
MIG-3**
(Balance shaft set)
"
2.3L
2346cc 91.1mm
1980-88
SOHC Mitsubishi 4D55 (Diesel), 4D55T (Turbo-Diesel)
Eng. Mitsubishi Truck: S, SP (Aux shaft set)
"
2.4L
2351cc 3.400
1985-99
(86.5mm)
MIG-2**
MIG-2-1R**
MIG-2E**
MIA-1*
SOHC 8 valve Mitsubishi G64B, 4G64 Eng. Mitsubishi
Expo, Galant, Space Wagon. Mitsubishi Truck: Van,
Mighty Max, Montero, S, Wagon
(1/2 Shell)
MIA-2*
(1/2 Shell)
(Balance shaft set)
"
2.4L
2351cc 3.400
1993-99
(86.5mm)
"
2.4L
2384cc 88mm
1975-81
DOHC & SOHC 16 valve G64B, 4G64 Eng. Mitsubishi
Eclipse Spyder, Expo & LRV, Galant & GS, Montero
Sport (Balance shaft set)
OHV Mitsubishi 4G53 Eng. Mitsubishi Passenger Cars
MIG-3**
MIG-3**
MIG-2**
(Balance shaft set)
"
2.5L
2477cc 91.1mm
1985-88
OHV Mitsubishi 4D56 Turbo Diesel Eng. Mitsubishi
Passenger Cars & Truck (Balance shaft set)
48
MIG-2-1R**
MIG-2E**
MIG-2**
MIG-2-1R**
MIG-2E**
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
MITSUBISHI (CONT'D)
4 cyl 155.8ci
2.6L
2555cc 91.1mm
1978-92
MIA-1*
SOHC Carb & F.I. Mitsubishi G54B, 4G54 Series Eng.
incl. G54T (Turbo). Mitsubishi Starion Mitsubishi
Truck: Montero, S, SP, SPX
(1/2 Shell)
MIA-2*
(Balance shaft set)
"
2.7L
2659cc 92mm
1970-91
Mitsubishi 4DR5 Diesel Eng. Mitsubishi Galant
6 cyl
3.0L
2972cc 91.1mm
1986-99
SOHC V-6 Mitsubishi 6G72, 6G72T (Turbo) Eng.
Mitsubishi Diamante, Galant Sigma, 300GT Mitsubishi
Truck: Mighty Max, Montero S, Sport, SP, SPX
MIG-2**
MIG-2-1R**
MIG-2E**
MI-2^
(1/2 Shell)
MIA-5*
(1/2 Shell)
(1 cam set per cyl. head reqd)
MI-3^
1985-88
Mitsubishi 4D30, 4D31, 4D31T, 4D31A, 4D31AT Series
Diesel & Turbo-Diesel Eng. Truck & Ind.
Mitsubishi 4D32 Diesel Eng. Truck & Ind.
1970-91
Mitsubishi 6DR5 Diesel Eng. Truck & Ind.
MI-1^
4 cyl
3.3L
3298cc 100mm
1982-88
"
3.6L
3567cc 104mm
6 cyl
4.0L
3988cc 92mm
MI-3^
MORRIS (BRITISH LEYLAND LTD.)
4 cyl
1.1L
1098cc 64.5mm
1962-71
Morris/British Leyland Eng. Cowley, Minor
BL-1
"
73.3ci
1.2L
1198cc 64.5mm
1954-61
Morris/British Leyland Eng. Cowley
DA-2
"
90.9ci
1.5L
1489cc 73mm
1954-61
Morris/British Leyland Eng. Cowley, Oxford
DA-2
"
91.6ci
1.5L
1500cc 73mm
1962-ON
Morris/British Leyland Eng. MGA, Cowley, Oxford
DA-2
"
99ci
1.6L
1622cc 76.2mm
1961-ON
Morris/British Leyland Eng. Oxford
DA-2
"
109.8ci
1.8L
1798cc 80.260
1963-ON
Morris/British Leyland Eng. MGB
DA-2
NASH (SEE METROPOLITAN)
NISSAN (includes INFINITI, DATSUN)
4 cyl 60.3ci
1.0L
988cc 2.870
1965-74
OHV Nissan A10 Eng. Nissan/Datsun 1000
DA-1
1970-77
OHV Nissan A12 Eng. Nissan/Datsun B110, 1200
DA-1
1961-65
DA-2
1979-82
OHV Nissan E1 Eng. Nissan/Datsun 312, 410, 1200
Nissan Truck: 320
OHV Nissan A12A Eng. Nissan/Datsun 210
1981-90
SOHC Nissan E13 Eng. Nissan 1300
(73mm)
"
71.5ci
1.2L
1171cc 2.870
(73mm)
"
72.5ci
1.2L
1189cc 2.870
(73mm)
"
75.4ci
1.2L
1237cc 2.950
DA-1
(75mm)
1.3L
1270cc 76mm
NIA-4*
(Full Round)
"
78.5ci
1.3L
1288cc 2.870
1972-74
OHV Nissan A13 Eng. Nissan/Datsun B210, 1300
(73mm)
49
DA-1
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
NISSAN (CONT'D)
4 cyl 79.3ci
1.3L
1299cc 2.870
1961-75
OHV Nissan J, J13 Eng. Datsun 411, 520, 1300
DA-2
(73mm)
"
85.3ci
1.4L
1397cc 76mm
1972-82
OHV A14 Nissan Eng. Nissan/Datsun 210, B210, 310
DA-1
"
90.5ci
1.5L
1483cc 78mm
1971-90
OHV J15 Nissan Eng. Nissan/Datsun Passenger Cars
DA-2
"
90.8ci
1.5L
1487cc 76mm
1979-82
OHV A15 Nissan Eng. Nissan/Datsun 210, 310
DA-1
"
90.8ci
1.5L
1487cc 76mm
1979-88
SOHC Nissan E15, E15ET (Turbo) Eng. Nissan/Datsun
Pulsar, Sentra
OHV Datsun G15 Eng. Datsun Passenger Cars
"
90.8ci
1.5L
1488cc 78mm
1960-65
"
95.6ci
1.6L
1567cc 78mm
1972-82
"
97.3ci
1.6L
1595cc 3.433
1965-70
(87.2mm)
"
1.6L
1597cc 2.990
1983-88
(76mm)
"
1.6L
1597cc 2.990
1989-90
(76mm)
"
1.8L
1751cc 80.5mm
1978-91
"
1.8L
1809cc 3.270
1982-90
(83mm)
1988-90
"
114.9ci
1.9L
1883cc 3.346
OHV Nissan J16 Eng. Nissan/Datsun Passenger Car,
Truck
OHV Nissan R, R16 Eng. Datsun 411, 510, 1600,
521 Truck
SOHC 8 valve E16, E16i, E16S, E16SPi Eng. NissanDatsun Pulsar, Sentra
SOHC 12 valve GA16i Eng. Nissan/Datsun Pulsar,
Sentra
OHV Nissan J18 Eng. Nissan/Datsun Passenger Car,
Truck
SOHC Nissan CA18, CA18E, CA18ET (Turbo) Eng.
Nissan Pulsar, 200SX
DOHC 16 valve Nissan CA18D, CA18DE Eng.
Nissan Pulsar, SE, 200SX (1 cam set per cyl. head reqd)
1960-65
Nissan/Datsun H Eng. Datsun Passenger Cars/Truck
1979-89
SOHC Nissan/Datsun Z20, Z20E, Z20S Series Eng.
Nissan/Datsun Passenger Cars/Truck
SOHC Nissan/Datsun CA20E, CA20S Series Eng.
Nissan Stanza, 200SX
OHV Nissan H20, U20 Eng. Nissan 2000
NIA-4*
(Full Round)
DA-3A
DA-2
DA-3A
NIA-4*
(Full Round)
NIA-1*
(Full Round)
DA-2
NIA-5*
(Full Round)
DA-3A
(85mm)
"
2.0L
1952cc 3.346
(85mm)
"
2.0L
1974cc 3.330
1982-90
(84.5mm)
"
120.9ci
2.0L
1982cc 3.433
1967-92
NIA-6*
(1/2 Shell)
NIA-5*
(Full Round)
DA-3A
(87.2mm)
"
121.5ci
2.0L
1991cc 3.270
1963-83
(83mm)
"
2.2L
2164cc 3.270
1963-88
(83mm)
"
2.2L
2187cc 87mm
1980-89
OHV Nissan SD 20 Diesel Eng. Nissan/Datsun
Passenger Car, Truck
OHV Nissan SD22 Diesel Eng. Nissan/Datsun 720
Truck
SOHC Z22, Z22E, S Eng. Nissan 200SX, 720
DA-3A
DA-3A
NIA-6*
(1/2 Shell)
"
2.3L
2289cc 3.500
DA-3A
1981-88
OHV Nissan SD23, TD23 Diesel Eng. Nissan/Datsun
Passenger Car, Truck
SOHC 8 valve Z24, Z24i, Z24S Eng. Nissan TruckVan: D21 P.U., Hardbody, Pathfinder720
Nissan SD25 Diesel Eng. Nissan 720 Diesel P.U.
1986-90
Nissan TD25 Diesel Eng.
DA-3A
1986-90
OHV Nissan TD27 Diesel Eng.
DA-3A
1981-90
(89mm)
"
2.4L
2389cc 3.500
1980-89
(89mm)
"
2.5L
2488cc 3.500
NIA-6*
(1/2 Shell)
DA-3A
(89mm)
"
2.5L
2494cc 3.500
(89mm)
"
2.7L
2663cc 96mm
50
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
NISSAN (CONT'D)
6 cyl
3.0L
2960cc 87mm
1987-98
SOHC & DOHC V-6 Nissan/Infiniti VG30D, VG30E,
VG30DE & VG30DT, VG30DET (Turbo) Eng. Nissan
Maxima, 200SX, 300ZX, Infiniti M30 Truck: D21,
Hardbody, Pathfinder, Quest, 720
NIA-3L*
(Full Round)
NIA-3R*
(Full Round)
"
3.0L
2960cc 87mm
1984-86
SOHC V-6 Nissan VG30, VG30T (Turbo) Eng. Nissan
Maxima, 300ZX, Truck: D21, Hardbody, Pathfinder,
720
NIA-2L*
(Full Round)
NIA-2R*
(Full Round)
"
198.1ci
3.2L
3246cc 3.270
1966-90
(83mm)
4 cyl
3.3L
3298cc 100mm
1978-83
6 cyl
4.0L
3956cc 86mm
1960-90
OHV 6 cyl. Nissan CN6-33, SD33 Diesel & SD33T
Turbo-Diesel Eng. Nissan Diesel Truck
Nissan ED33 & FD33 Diesel, ED33T & FD33T Turbo
Diesel Eng.
OHV Nissan P, PF, PF40 Eng. Nissan Truck & Ind.
DA-5
NI-1^
NI-2^
NUFFIELD TRACTOR (Also see BRITISH LEYLAND LTD.)
4 cyl 99ci
1.6L
1622cc
1961-71
154 Gas & Diesel Eng.
DA-2
OLDSMOBILE (SEE GENERAL MOTORS)
OLIVER TRACTOR & POWER UNITS
4 cyl 91ci
1.5L
2.875
CO-3
166HC, 166HC Super 550HC, 66OHC(Oliver Gas Eng),
550DSL, 660 DSL (Oliver Diesel Eng.) Tractor
F-140 (Continental L-Head Eng.) Tractor
WA-4
166HC, 166HC Super, 550HC, 66OHC (Oliver Gas
Eng) 550DSL, 660 DSL (Oliver Diesel Eng.) Tractor
166HC, 166HC Super, 550HC, 66OHC (Oliver Gas
Eng) 550DSL, 660 DSL (Oliver Diesel Eng.) Tractor
177HC, 177LP (Waukesha Eng.) Tractor
WA-4
"
129ci
2.1L
3.313
"
140ci
2.3L
3.188
"
144ci
2.4L
3.500
1955-62
"
155ci
2.5L
3.625
1959-70
6 cyl 194ci
3.2L
3.313
1955-59
4 cyl 198ci
3.3L
3.750
DD198, D2120 Hercules Diesel Eng. Tractor
HE-8
205ci
3.4L
3.250
QXB3 Hercules Eng. Tractor/Combine
HE-5
6 cyl 209ci
3.4L
3.188
F-209 (Continental L-Head Eng.) Tractor
K-1
177HC, 177LP (Waukesha Eng.) Tractor
WA-4
"
"
216ci
3.5L
3.500
"
226ci
3.7L
3.313
1955-59
PY91, Y4091, 91 (Continental L-Head Eng.) Tractor
1959-69
OHV F226 Continental Eng. Tractor
51
CO-8
WA-4
WA-4
K-1
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
OLIVER TRACTOR & POWER UNITS (CONT'D)
6 cyl 228 ci
3.7L
3.375
"
231ci
3.8L
3.500
1955-62
"
231ci
3.8L
3.500
1955-62
"
232ci
3.8L
3.625
1955-70
"
244ci
4.0L
3.438
"
251.6ci
4.1L
3.438
"
263ci
4.3L
3.625
"
265ci
4.3L
3.750
1955-59
"
265ci
4.3L
3.750
1955-59
"
283ci
4.6L
3.875
"
283ci
4.6L
3.875
"
302ci
5.0L
4.000
1955-59
"
302ci
5.0L
4.000
1955-59
"
310ci
5.1L
3.875
"
310ci
5.1L
3.875
"
320ci
5.2L
4.000
"
322ci
5.3L
4.125
"
339ci
5.6L
4.000
"
339ci
5.6L
4.000
8 cyl 573ci
9.4L
4.500
1955-62
JXA, JXC, JXD (Hercules Eng.) Tractor
HE-1
188HC, 188HC Waukesha Super incl. Diesel. Early
Engs. - one bearing. Tractor
188HC, 188HC Waukesha Super. Late - four bearings.
Tractor
1550, 1555, 177D, 177D Waukesha Super, 177HC
(Incl. Diesel.) Tractor
F244 (Continental L-Head Eng.) Tractor
WA-4
430, 431, 525, 535, 545 Chrysler L-Head Eng. Edible
Bean Combine, Wheel Tractor
JXA, JXC, JXD (Hercules Eng.) Tractor
PD-3
188 HC, 188HC Waukesha Super, 188LP
Early - one bearing. Tractor
188HC, 188HC Waukesha Super, 188LP, Late - four
bearings. Tractor
Oliver/Waukesha 185GB, 185GM Gas & Diesel Eng.
Late - four bearings. Tractor
Oliver/Waukesha 199D, 199D Super, 950D, 950DSL,
99D Diesel. Early - one bearing. Tractor
OliverWaukesha 99HC, 199HC Super, 950HC
Gas & Diesel. Late - four bearings. Tractor
Late - four bearings. Tractor
JXA, JXC, JXD (Hercules Eng.) BG, BGS, G, 25, 30,
30G Crawler
Oliver/Waukesha 199D, 199D Super, 950D, 950DSL,
99D Diesel. 99 Super Series Tractor
JXLD (Hercules Eng. w/1.125" length on No. 1 & 4
positions) OC-12G, OC-12HC, OC-126 Crawler
JXLD (Hercules Eng. w/1.057" length on No. 1 & No. 4
positions) OC-12G, OC-12HC, OC-126 Crawler
Caterpillar V-8 3150 Series Eng. 2255 Wheel Tractor
WA-4
CAT-2
CCK,CCK-MSV-106F,CCKB, Super CCK
ON-1^
WA-7
WA-4
K-1
HE-1
WA-7
WA-4
WA-7
WA-4
WA-7
WA-4
WA-7
HE-1
WA-4
HE-1
HE-8
ONAN
2 cyl 50ci
820cc 3.250
OPEL
4 cyl 91.1ci
1.5L
1492cc 82.5mm
1965-73
SOHC Opel 1.5, 1.5S Eng. w/ Triangle mark on left
OP-3
SOHC Opel 1.6S Eng. w/ Triangle mark on left side
of head
of head
SOHC Opel 1.8E, N, S Series (Aux. gear bearing set)
OP-3
"
96.6ci
1.6L
1584cc 85mm
1970-81
"
103.4ci
1.7L
1698cc 88mm
1965-81
"
110ci
1.8L
1796cc 84.8mm
1976-82
52
OP-3
CHG-14**
Hi Perf
(1/2-Full Shell)
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
OPEL (CONT'D)
4 cyl 115.8ci
"
115.8ci
1.9L
1897cc 93mm
1965-77
1.9L
1897cc 93mm
1971-81
of head (3 bearing head)
SOHC Opel 1.9S Eng, (4 bearing head)
OP-3
OP-5
PERKINS
PEUGEOT
PORSCHE (See AUDI & VOLKSWAGON)
RENAULT
4 cyl
1.7L
1721cc 81mm
1985-87
SOHC Renault F3N Eng. Renault Alliance, Encore
RN-1^
"
2.0L
1965cc 82mm
1987
OHV Renault F3R Eng. Renault Alliance GTA
RN-1^
REO MOTOR TRUCK
6 cyl 255ci
4.2L
3.625
Reo OA110, OA123, OA130, OA145, OA255
R-1^
"
292ci
4.8L
3.875
Reo OA255
R-1^
"
331ci
5.4L
4.125
Reo OA331, OH160, OH170
R-1^
"
362ci
5.9L
4.250
Reo OH185, OH186, 6-186
R-1^
"
400ci
6.6L
4.250
Reo OH200, 6-190, 6-200
R-1^
RILEY
4 cyl 90.7ci
"
99ci
1.5L
1486cc
1958-65
DA-2
1.6L
1622cc 76.2mm
1961-69
DA-2
ROVER/LANDROVER
8 cyl 215.4ci
3.5L
3528cc 88.8mm
1965-ON
Rover V-8 Eng. Range Rover, 3500, 3500S
B-11
SAAB
4 cyl
1 1.5L
1498cc 94mm
1962-67
Saab V-4 Eng. 95, 96 Series
F-42^
"
1 1.7L
1699cc 90mm
1964-67
Saab V-4 Eng. 95, 96 Series, P5S Marathon
F-42^
SATURN (Also see General Motors)
4 cyl 116ci
"
116ci
1.9L
1.9L
1901cc 3.230
1901cc 3.230
1991-99
1991-00
SOHC Vin Type 9 Saturn LKO Eng. Saturn SC, SL, SW
Passenger Cars
1.9L / 1901cc DOHC 16 valve Vin Type 7, 8 Saturn
LKO Eng. Saturn SC, SL, SW Passenger Cars
53
GMA-1*
(Full Round)
GMA-2*
(1/2 Shell)
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
STUDEBAKER
3.2L
3.563
1965-66
OHV Chevrolet Eng. Studebaker Commander, Cruiser
CH-7
230ci
3.8L
3.875
1966
OHV Chevrolet Eng. Studebaker Commander, Cruiser
CH-7
8 cyl 283ci
4.6L
3.875
1965-66
OHV V-8 Chevrolet Eng. Studebaker Avanti,
Commander, Cruiser, Daytona, Wagonaire
CH-8
6 cyl 194ci
"
CHP-8 or
CHP-8T
(Coated)
SUBARU
4 cyl
1.3L
1324cc 74mm
1985-99
SA-1
SOHC Subaru G13A Eng.
(Full Round)
SUZUKI
4 cyl
1.3L
1324cc 74mm
1985-99
SA-1
SOHC Subaru G13A Eng. Suzuki Samurai, Sidekick,
Swift GA, GLX, GS
(Full Round)
TOYOTA
4 cyl
0.9L
933cc 72mm
1970-86
OHV Toyota 2K Series Eng.
TO-3
"
1.1L
1077cc 2.952
1966-70
OHV Toyota KC, 1KC Series Eng. Toyota Corolla
TO-3
1968-83
OHV Toyota 3K, 3KC Series Eng. Toyota Corolla
TO-3
1977-88
OHV Toyota 4K, 4KC, 4KE Eng. Toyota Starlett
TO-3
1970-79
TO-7
(75mm)
"
1.2L
1166cc 2.952
(75mm)
"
1.3L
1290cc 2.952
(75mm)
"
85.9ci
1.4L
1407cc 3.149
"
1.5L
1468cc 80.5mm
1984-88
OHV Toyota T, TJ, TU Series Eng. Toyota Passenger
Cars
OHV Toyota 5K Series Eng. Toyota Passenger Cars
"
1.5L
1490cc 78mm
1964-71
OHV Toyota 2R Series Eng. Toyota Corona
TO-2
"
1.6L
1587cc 80.5mm
1965-85
OHV Toyota 4R, 9R, 12J (Export series) Eng.
TO-2
1.6L
1588cc 3.346
1970-85
SOHC Toyota 2T, 2TC, 2TJ, 2TU, 12T, 12TJ, 12TU
Series Eng. Toyota Carina, Corolla
OHV Toyota 7R, 7R-B Eng. Toyota Passenger Cars
TO-7
(80mm)
"
97ci
(85mm)
"
97.2ci
1.6L
1591cc 3.385
1983-88
OHV Toyota 1Y Series Eng. Toyota Passenger Cars
TO-8
TOG-8**
TO-12
1970-73
OHV Toyota 6R, 6RB Eng. Toyota Passenger Cars
TO-8
1980-86
OHV Toyota 3T, 3TC, 3TEU, 3TU, 13TJ, 13TU Series
Eng. Toyota Corolla
OHV Toyota 16R, RB, RJ, RU Eng. Toyota Pass. Cars
TO-7
1968-72
(86mm)
"
1.6L
1626cc 3.385
TO-3
(86mm)
"
104.2ci
1.7L
1707cc 3.385
(86mm)
"
108ci
1.8L
1770cc 3.346
(85mm)
"
110.8ci
1.8L
1808cc 3.484
1971-79
(88.5mm)
"
1.8L
1812cc 3.385
1983-88
OHV Toyota 2Y Series Eng.
1968-72
8R, 8RB, 8RC, 8RD, 8RG Eng.
TO-8
TOG-8**
TO-12
TO-8
TOG-8**
TO-11
(86mm)
"
113.4ci
1.9L
1858cc 3.385
(86mm)
"
115.8ci
1.9L
1897cc 3.464
(88mm)
1960-70
OHV Toyota 3R, 3RB, 3RC Eng. Toyota Crown, Stout,
Hi-Lux P.U.
54
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
TOYOTA (CONT'D)
4 cyl 120.1ci
2.0L
1968cc 3.484
1970-94
SOHC Toyota 16R Series & 18R Series, DOHC 8RC
(77-82). Toyota Celica, Corona, Hi-Lux P.U.
1965-84
1967-88
DOHC Toyota 24 valve M, MB, MC, MJ, MU, 1M, 3M
Series Eng. Toyota Passenger Cars
OHV Toyota 5R Eng. Toyota Passenger Cars
1983-88
OHV Toyota 8 valve 3Y, 3YEC Series Eng.
1978-88
SOHC Toyota L Series Diesel Eng. Hi-Lux P.U.
1974-80
SOHC Toyota 20R Eng. Toyota Celica, Corona,
Hi-Lux P.U.
1985-90
OHV Toyota 4Y, 4YEC Series Eng. Toyota Van
1966-72
SOHC Toyota 2M Series Eng. Toyota Corona Mk II,
Crown
1979-95
SOHC Toyota 22R, RE, REC Series Eng. Toyota
Celica, Corona, Hi-Lux P.U., 4-Runner
SOHC Toyota 2L (Diesel), 2LT (Turbo-Diesel) Eng.
Hi-Lux P.U.
SOHC Toyota 4M, 4ME Eng. Toyota Corona, Crown
(88.5mm)
6 cyl 121.3ci
2.0L
1988cc 3.386
4 cyl 121.7ci
2.0L
1994cc 3.464
(86.1mm)
TO-8
TOG-8**
TO-8
TO-11
(88mm)
"
2.0L
1998cc 3.386
TO-12
(86.1mm)
"
2.2L
2188cc 3.543
TO-13^
(90mm)
"
134.1ci
2.2L
2189cc 3.484
(88.5mm)
"
2.2L
2237cc 3.580
2.3L
2253cc 2.952
TOA-1*
TOG-8**
TO-12
(1/2 Shell)
(91mm)
6 cyl 137.5ci
(74.9mm)
4 cyl
2.4L
2366cc 3.620
(92mm)
"
2.4L
2446cc 3.620
1981-88
(92mm)
6 cyl 156.4ci
2.6L
2563cc 3.149
1971-80
(80mm)
TO-8
TOG-9**
TOA-1*
(1/2 Shell)
TO-13^
TO-8
TOG-9**
TOG-10**^
4 cyl
2.7L
2693cc 95mm
1994-99
DOHC Toyota 3RZFE Eng. Toyota Truck: T100, 1/2
Ton P.U. (Aux/Balance shaft set)
6 cyl 168.3ci
2.8L
2759cc 3.270
1980-88
TOG-9**
4 cyl
3.0L
2977cc 95mm
1972-84
SOHC 5ME, DOHC 5MGE Toyota Eng. Toyota
Cressida, Supra (Aux/Balance shaft set)
OHV Toyota B, 11B (Diesel) Eng. Toyota Car & Truck
"
3.0L
2977cc 95mm
1986-90
TO-15^
"
3.2L
3168cc 98mm
1977-82
TO-14^
"
3.4L
3431cc 102mm
7/84-90
TO-15^
"
3.4L
3431cc 102mm
OHV Toyota 3B, 13B (Diesel), 13BT (Turbo-Diesel)
Eng. Toyota Car & Truck
1980-6/84 OHV Toyota B, 3B (Diesel) Eng. Toyota Car & Truck
"
3.7L
3660cc 102mm
1988
TO-15^
3.9L
3878cc 3.543
1954-75
OHV Toyota F Eng. Toyota Truck, Land Cruiser
TO-10
1985-92
OHV Toyota 3F, 3FE Eng. Toyota Truck, Land Cruiser
TO-10
1975-87
OHV Toyota 2F Eng. Toyota Truck, Land Cruiser
TO-10
1979-ON
Triumph V-8 Eng. Triumph TR-8
(83mm)
6 cyl 236.6ci
TO-14^
TO-14^
(90mm)
"
4.0L
3955cc 3.700
(94mm)
"
258.2ci
4.2L
4230cc 3.700
(94mm)
TRIUMPH
8 cyl 215.4ci
3.5L
3528cc 88.9mm
55
B-11
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
VOLKSWAGEN
4 cyl 66.4ci
VWG-1**
1.1L
1093cc
1974-77
"
1.2L
1192cc 77mm
1953-65
"
1.3L
1285cc 77mm
1966
1.3L
1297cc 2.952
1973-81
OHV VW (H-4 cyl) air cooled series 122 Eng. VW
Type I Beetle, Type II Transporter & Microbus
OHV VW (H-4 cyl) air cooled Eng. VW Type I Beetle,
Karmann Ghia
SOHC VW 1300ZF Series Eng. VW Passenger Cars
SOHC VW EH, FX Series Eng. Rabbitt, Scirocco (AuxBalance shaft set)
SOHC VW FC, FG, XS, XW, XZ Series 1500S Gas &
068 Series Diesel Eng. VW Dasher, Jetta, Rabbitt,
Scirocco, P.U. (Aux/Balance shaft set)
OHV VW (H-4 cyl) air cooled series 124 Eng. VW
Type II Transporter & Microbus, Karmann Ghia
OHV VW (H-4 cyl) air cooled AD, AE, AH, AJ series
124A, 126, 126A Eng. VW Type II Transporter &
Microbus, Type III Fastback & Squareback, Karmann
Ghia, Type 181 The Thing, VW Truck
SOHC VW EH, EJ, FN, YK 827/1600N, 068 Series Gas
Eng. VW Dasher, Jetta, Rabbitt, Scirocco, P.U. (AuxBalance shaft set)
SOHC VW CR, CS, CY, JK, MD, ME, MF, YG Diesel &
Turbo-Diesel Eng. VW Dasher, Golf, Jetta, Quantum,
Rabbitt, Vanagon, P.U. (Aux/Balance shaft set)
SOHC VW EN, JF, WT Series Eng. Dasher, Jetta,
Quantum, Rabbitt, Scirocco, P.U. (Aux/Bal. shaft set)
SOHC (incl. Supercharged) VW ABG, GX, HT, JH, JN,
PF, PG, RD, RV Series 068 2H Eng. VW Cabriolet,
Corrado, Fox, Golf, Jetta, Quantum, Rabbitt, Scirocco
"
79.1ci
(75mm)
"
88.8ci
1.5L
1457cc 3.130
1978-80
(79.5mm)
"
89.75ci
1.5L
1471cc 3.011
1974-80
(76.5mm)
"
1.5L
1493cc 83mm
1965-69
"
1.6L
1584cc 85.5mm
1965-79
1.6L
1588cc 3.130
1975-83
"
96.9ci
(79.5mm)
96.9ci
1.6L
1588cc 3.011
1980-92
(76.5mm)
"
104.6ci
1.7L
1715cc 3.130
1981-84
(79.5mm)
1.8L
"
1780cc 3.190
1982-94
(81mm)
"
1.8L
1780cc 3.190
1987-88
5 cyl
2.1L
2144cc 79.5mm
1978-86
"
2.2L
2226cc 81mm
1984-96
(81mm)
DOHC VW 16 valve PL Series Eng. See applications
above (Aux/Balance shaft set)
SOHC Audi/VW KM, WE Series Eng. VW Quantum
VW-1^
VW-1^
VWG-1**
VWG-1**
VWG-1**
VW-1^
VW-1^
VWG-1**
VWG-1**
VWG-1**
VWA-2*
(1/2 Shell)
VWG-1**
VWG-1**
VWA-1*
(1/2 Shell)
VWA-1*
SOHC & DOHC JT, KX, KZ, MC Eng. VW Quantum,
Quantum Syncro
(1/2 Shell)
VOLVO
4 cyl 108.6ci
"
118.1ci
1.8L
1780cc 84.1mm
1961-68
2.0L
1986cc 3.500
1969-75
(88.9mm)
"
129.8ci
2.1L
2127cc 3.622
1976-85
(92mm)
OHV Volvo B18A, B, & D Eng. Volvo 121, 122, 122S,
123GT, 131-133, 142, 142S, 144, 144S, 145, 221, 222,
223, PV544, 545, 1800S (Aux/Balance shaft set)
OHV Volvo B19A, B19E, B20A-F Eng. Volvo 131,
133, 142, 142S, 144, 144S, 145, 145S, 240 Series,
1800S (Aux/Balance shaft set)
SOHC Volvo B21F, B21FT (Turbo-75 on) Eng.
Volvo DL, GL, GLT, GT, 240, 240DL, 240GL, 242, 244,
245 (Cylinder Heads w 1.265" cam housing w cap & saddle
VO-2**
VO-2**
VOA-1*
(1/2 Shell)
design for 1/2 shell repair brg for above appl.)
"
129.8ci
2.1L
2127cc 3.622
(92mm)
1974-85
SOHC Volvo B21A, B21E, B21FT-(Turbo-74only) Eng.
56
VO-2**
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
Hi Perf
(1/2-Full Shell)
VOLVO (CONT'D)
4 cyl
2.3L
2316cc 3.780
1982-93
(96mm)
VOA-1*
SOHC Volvo B23E, B23F, B23FT-Turbo, B230F,
B230FT-Turbo Eng. Volvo Coupe, DL, GL, GT, 240
Series, 740-760-780-940 Series
(1/2 Shell)
(Cylinder Heads w 1.265" cam housing w cap & saddle
design for 1/2 shell repair brg for above appl.)
6 cyl 183ci
3.0L
2978cc 3.500
1983-91
OHV Volvo B30A, E, & F Eng. Volvo 164
VO-3
(88.9mm)
VOLVO-PENTA Marine Engines
8 cyl 305ci
5.0L
5012cc 3.736
Volvo-Penta (Chevrolet) AQ200D, AQ225D, BB225A,
BB225AV Marine Eng.
CH-8
CHP-8 or
CHP-8T
5.7L
5736cc 4.000
Volvo-Penta (Chevrolet) AQ260A, AQ290D, BB260A,
BB260AV Marine Eng.
CH-8
CHP-8 or
CHP-8T
(Coated)
"
350ci
(Coated)
WAUKESHA
4 cyl 113ci
1.9L
3.000
WA-3
"
121ci
2.0L
3.313
Waukesha F Series: FC, FCK, FCL, FCS, FCX, FK, FKJ,
FKL, FL, FLJ, FLS, FS FWJ, & 132 Eng.
Waukesha 160 Series Eng.
"
125ci
2.0L
3.250
Waukesha 180 GB Series Eng. (Military Standard)
WA-4
"
129ci
2.1L
3.313
WA-4
"
133ci
2.2L
3.250
"
139ci
2.3L
3.438
Waukesha 180DAB, 180DAC, 180DL, 180DLB,
180DLC, 180DLCU, G, K and 180SB Series Gas &
Diesel Eng.
Waukesha FC, FCL, FCS, FCX, FK, FL, FLJ, FLS, FS,
FWJ, 132 Series, FCB-4 (Military Standard) Eng.
Waukesha 180 GM (Military Standard) Eng.
"
144ci
2.4L
3.500
WA-4
"
155ci
2.5L
3.625
"
176ci
2.9L
3.625
6 cyl 186ci
3.0L
3.250
Waukesha 180D, G, & K Series: 180DKB, 180GA,
180GK, 180GL, 180GLB, 180GS, 180KL Eng.
Waukesha D155, D155D, D155G, VRG-155, D176,
D176G, G176, VRG176 180 Series: 180GKB,
180GKBU, 180G Gas & Diesel Eng.
Waukesha 176 Series: D176, D176G, G176, VRG176
Eng.
Waukesha 185 Series: 185GB, 185GM (Military Std.)
Eng.
Waukesha 185 D & G Series: 185DAB, 185 DAC,
185 DLC, 185 DLCU, 185 DSB, 185 DY, 185 GA Gas
& Diesel Eng.
Waukesha 185 GB, 185GM, 209 Series (Military Std.)
Eng.
Waukesha 185 D & G Series: 185 GL, 185GLB,
185GS, 185GM, 185KL, 185DLC, 185DLCU Gas &
Diesel Eng.
Waukesha 232 & 233 V Series: VRD-232, VRG-232,
F-232G Gas & Diesel Eng.
Waukesha B Series Eng.
"
194ci
3.2L
3.313
"
209ci
3.4L
3.438
"
216ci
3.5L
3.500
"
232ci
3.8L
3.625
"
263ci
4.3L
3.625
57
WA-4
WA-3
WA-4
WA-4
WA-4
WA-4
WA-4
WA-4
WA-4
WA-4
WA-4
CAM BEARING
DISPLACEMENT
CAMSHAFT BEARINGS
CAM BEARING
CAMSHAFT BEARINGS
DISPLACEMENT
YEAR
Cyl
cu.in
L
cc.
Bore
OHC REPAIR
Standard
WAUKESHA (CONT'D)
6 cyl 265ci
4.3L
3.750
"
283ci
4.6L
3.875
"
299ci
4.9L
3.313
"
302ci
5.0L
4.000
"
310ci
5.1L
3.875
"
320ci
5.2L
4.125
Waukesha 190 Series: 190DLA, 190DLB, 190DLC,
190DLCA, 190DLCR, 190DLCU, 190DSB, 190GL,
190GLB, 190GLBU, 190GLC, 190GS; F-265G, VRG265
Gas & Diesel Eng.
Waukesha F283G, VRD283, VRG283, VRD310,
VRG310 Gas & Diesel Eng.
Waukesha 185 Series: 185DAB, 185DAC, 185DLB
Eng.
Waukesha 190, 195 & 197 Series: 190GK, 190KL,
195 DLC, 195DLCA, 195DLCU, 195GL, 197DLC,
197DLCA, 197 DLCS Gas & Diesel Eng.
Waukesha F-310G, VRD-310, VRD-310-S, VRG-310
Gas & Diesel Eng.
Waukesha 195 Series: 195GK, 195GKA, 195 GKU
Eng.
WA-4
WA-7
WA-4
WA-4
WA-7
WA-4
WILLYS (JEEP)
4 cyl 134ci
2.2L
3.125
1953-73
1941-68
"
150ci
2.5L
3.313
1966-67
6 cyl 225ci
3.7L
3.750
1965-72
3.7L
3.313
1952-54
"
226ci
1947-63
Willys/Jeep 134 F-Head (Hurricane) Eng. CJ, DJ,
Truck & Utility
Willys/Jeep 134 L-Head (Lightning) Eng. CJ, DJ,
Henry J, Truck & Utility
Continental Eng. Willys Truck & Industrial
OHV BUICK V-6 Type HC, MH, NH, SF, SH Eng. Willys
Jeep CJ, DJ, Gladiator, Truck & Utility, Wagoneer
Willys/Jeep 226 F-Head (Hurricane) Eng. Willys
Pick-up, Truck & Utility
Willys/Jeep 226 L-Head (Lightning) Eng. Willys, KaiserFrazier Pick-up, Truck & Utility
58
J-1
CO-3
B-6
K-1
Hi Perf
(1/2-Full Shell)
BEARING SET CONTENTS
SET NO.
HOUSING
BORE
LENGTH
MAX.
WALL
FORD 302ci, 351ci/5.8L SVO block
351HP-1
351HP-2
351HP-3
351HP-4
351HP-5
1
2
3
4
5
2.2040
2.2040
2.2040
2.2040
2.2040
0.660
0.660
0.660
0.660
0.660
.0602
.0677
.0752
.0827
.0902
std
FORD 302ci, 351ci/5.8L SVO block
+.010 O.D.
351HP-1R1
351HP-2R1
351HP-3R1
351HP-4R1
351HP-5R1
1
2
3
4
5
2.2140
2.2140
2.2140
2.2140
2.2140
0.660
0.660
0.660
0.660
0.660
.0652
.0727
.0802
.0877
.0952
351RHP
FORD 302ci, 351ci SVO "R" block
351HP-1
1,2,3,4,5
2.2040
0.660
.0602
ALLIS-CHALMERS 4cyl 149ci/2.4L 60 H Eng.
CH4, B115, B125,BE,148 Series
A-1-1
1,2,3
1.8805
1.125
.0642
ALLIS-CHALMERS 4 cyl G-226
LEROI 4-6 cyl G-210
A-2-1
1,2,3
2.0055
1.308
.0643
ALLIS-CHALMERS 4 cyl 149ci & 200ci Eng.
D2200,G2200, 433, 433T, 2200
A-3-1
A-3-2
1
2,3
2.2595
2.2595
1.385
1.000
.0630
.0630
ALLIS-CHALMERS 6cyl, 265ci & 301ci Eng.
649, 649T, G2500, 2800 Series, 2900 Series
A-3-1
A-3-2
1
2,3,4
2.2595
2.2595
1.385
1.000
.0630
.0630
ALLIS-CHALMERS 6cyl 426ci Eng. 3400, 3500
3500MkII, 3700, 3750
A-3-1
A-3-2
1
2,3,4,5,6
2.2595
2.2595
1.385
1.000
.0630
.0630
BUICK,GM, OLDS, AMC, JEEP
V-6 cyl, 198, 225 (62-73)
B-6-1
B-4-3
B-4-4
B-4-5
1
2
3
4
1.8865
1.8565
1.8265
1.7965
0.750
0.750
0.750
0.750
.0642
.0643
.0643
.0643
BUICK V-8 340, 401, 425 (57-66)
GM V-8 340, 364, 400, 401, 425 (57-67)
B-4-1
B-6-1
B-4-3
B-4-4
B-4-5
1
2
3
4
5
1.9165
1.8865
1.8565
1.8265
1.7965
0.750
0.750
0.750
0.750
0.750
.0643
.0642
.0643
.0643
.0643
GM, BUICK, OLDS, PONT & JEEP 6 cyl,
V-8 cyl 350, 400, 455 (67-81)
B-11-1
B-9-2
1
2,3,4,5
1.9165
1.9165
0.750
0.620
.0642
.0642
GM HP version (see B-9 listing)
BP-11-1
BP-9-2
1
2,3,4,5
1.9165
1.9165
0.750
0.620
.0642
.0642
GM, BUICK, OLDS, PONT V-8 cyl,
215, 300, 340 (61-67)
TRIUMPH (78-80)
B-11-1
B-6-1
B-4-3
B-4-4
B-4-5
1
2
3
4
5
1.9165
1.8865
1.8565
1.8265
1.7965
0.750
0.750
0.750
0.750
0.750
.0642
.0642
.0643
.0643
.0643
GM, V-6 181 3.0L (75-85)
GM, BUICK, CHEV, PONT, OLDS V-6 231
BUICK, CAD, CHEV, OLDS 196, 252 (75-85)
B-11-1
B-9-2
1
2,3,4
1.9165
1.9165
0.750
0.620
.0642
.0642
GM, BUICK 6 cyl, 231 (75-85) Opt. groove
Design #1 pos
B-11-1B
B-9-2
1
2,3,4
1.9165
1.9165
0.750
0.620
.0642
.0642
.010
GM, BUICK, CHEV, OLDS, PONT V-6
181, 204, 231, 252 (76-95)
B-13-1
B-9-2
1,4
2,3
1.9365
1.9165
0.750
0.620
.0743
.0642
BP-13
GM HP version (see B-13 listing)
BP-13-1
BP-9-2
1,4
2,3
1.9365
1.9165
0.750
0.620
.0743
.0642
GM 6 cyl, 3.8L/231ci VIN "K" (95-ON)
B-14-1
B-14-2
1,4
2,3
1.9965
1.9765
0.745
0.630
.0741
.0641
MG 4cyl 1.1L/1098cc COWLEY, MINOR & MG
1100 (62-71) 1.3L/1275cc MG Midget 1300
(67-71)
BL-1-1
BL-1-2
BL-1-3
1
2
3
1.7960
1.7539
1.5039
1.125
0.755
0.533
.0644
.0644
.0644
351HPT (Coated)
351HP-R1
351RHPT(Coated)
A-1
.010
A-2
std
A-3^
std
A-4^
std
A-5^
std
B-6
.010
B-8
.010
.020
B-9
.010
.020
.030
BP-9
BP-9T (Coated)
B-11
.010
.020
B-12
.010
.020
B-12B
.010
B-13
BP-13T (Coated)
B-14
std
BL-1^
std
*Denotes half shell bearing
**Denotes balance shaft bearings
59
59
SET CONTENTS
POSITION
CAM BEARING
CAM
BEARING
SET CONTENTS
CONTENTS
351HP
MAKE/MODEL(S) ENGINE MFG.
SET CONTENTS
CAM BEARING
SET NO.
HOUSING
BORE
LENGTH
MAX.
WALL
CONTENTS
POSITION
BMW 6 cyl OHC, 4 Journal, belt drive, E Series
(77-95)
BMA-1-1
BMA-1-2
BMA-1-3
BMA-1-4
1
2
3
4
1.8918
1.8524
1.8131
1.4587
0.800
0.800
0.800
1.390
.0403
.0403
.0403
.0403
std
BMW 6 cyl OHC, 4 Journal, chain drive, E Series
(77-95)
BMA-1-1
BMA-1-2
BMA-1-3
BMA-1-10
1
2
3
4
1.8918
1.8524
1.8131
1.5772
0.800
0.800
0.800
0.800
.0403
.0403
.0403
.0403
BMA-3
BMW 6 cyl OHC, 7 Journal (80-95)
BMA-1-1
BMA-1-5
BMA-1-2
BMA-1-6
BMA-1-3
BMA-1-7
BMA-1-10
1
2
3
4
5
6
7
1.8918
1.8918
1.8524
1.8524
1.8131
1.8131
1.5772
0.800
0.800
0.800
0.995
0.800
0.800
0.800
.0403
.0500
.0403
.0500
.0403
.0500
.0403
BMW OHC Engs. 3 Journal (77-ON)
Casting #1 262 177
BMA-1-8
BMA-1-9
BMA-4-3
1
2
3
1.7741
1.7340
1.4587
1.115
1.085
1.000
.0403
.0400
.0398
ALLIS-CHALMERS, BUDA 4-6 cyl,
4B 153, 157, 182, 4D 153, 175, 182,
6B 230, 262, 273, 6D 230, 262, 273
HERCULES D 175 Diesel, DA 182 Diesel;
L6 G-230, 262(Gas) & D 262, 273 Diesel
BU-1-1
BU-1-2
BU-1-3
1
2,3
4
2.1245
2.1245
1.3745
1.125
0.875
1.000
.0615
.0615
.0615
CAD V-8 cyl, 390 (59-62)
GM V-8 cyl, 331, 365, 390 (49-63)
C-2-1
C-2-2
1,2,3,4
5
1.8797
1.5682
0.750
0.875
.0641
.0642
GM, CAD V-8 cyl, 368, 390, 425,
429, 472, 500 (63-84)
C-3-1
1,2,3,4,5
1.8797
0.620
.0637
GM, CAD 252/4.1L (82-88) Alum Eng.
273, 300 (82-91)
C-4-1
C-4-2
C-4-3
C-4-4
C-4-5
1
2
3
4
5
2.1687
2.1487
2.1287
2.1087
2.0887
0.591
0.591
0.591
0.591
0.591
.0652
.0652
.0652
.0652
.0652
GM, CAD 252/4.1L (82-88) Alum Eng.
273, 300 (82-91)
(Special wide #5 pos set)
C-4-1
C-4-2
C-4-3
C-4-4
C-4-5A
1
2
3
4
5
2.1687
2.1487
2.1287
2.1087
2.0887
0.591
0.591
0.591
0.591
0.685
.0652
.0652
.0652
.0652
.0652
.010
CASE, CONT, VAB 124, 126, 148, 159, & 164
Series
CA-3-1
CA-3-2
CA-3-3
1
2
3
1.8805
1.8805
1.8805
1.312
0.718
1.187
.0642
.0642
.0642
CA-4
CASE 4 cyl, 188-201 Series
CA-4-1
CA-4-2
1,3
2
1.8805
1.8805
1.218
0.495
.0643
.0642
CASE Tractor 4 cyl, 6 cyl Gas & Diesel
251, 267, 284, 301, 336 Series
CA-6-1
CA-6-2
CA-6-3
1
2,3
4
2.3745
2.3745
2.3745
1.656
1.437
1.156
.0625
.0625
.0625
std
CASE Tractor 4 cyl, 6 cyl Gas, Diesel, & LPG
377, 401, 451, 504 Series
CA-6-1
CA-6-2
CA-6-3
1
2,3,4
5
2.3745
2.3745
2.3745
1.656
1.437
1.156
.0625
.0625
.0625
CA-8
CASE Tractor 4 cyl, G188-201 Series
CA-4-1
CA-4-2
1,3
2,4
1.8805
1.8805
1.218
0.495
.0643
.0642
CASE 4 cyl, 188D, 207D
CA-4-1
CA-4-2
CA-9-1
1
2,3,4
5
1.8805
1.8805
1.8805
1.218
0.495
0.970
.0643
.0642
.0640
CASE 6cyl 504 C Series diesel, turbo diesel
CA-11-1
1,2,3,4,5,
6,7
2.5197
0.994
.0773
BMA-1
std
BMA-2
std
BMA-4
std
BU-2
.010
C-2
.010
C-3
.010
.020
.030
C-4
.030
C-4A
std
CA-3
.010
CA-6
std
CA-7
std
CA-9
std
CA-11^
std
60
SET NO.
CATERPILLAR 4 cyl, 318ci 3204 Series
CAT-1-1
CAT-1-2
1
2,3
2.6525
2.6525
1.890
0.755
.0750
.0750
CATERPILLAR 8 cyl, 522, 573, 636ci. Series
1140, 1145, 1150, 1160, 3145, 3150, 3160, 3208,
V Series 150, 175, 200, 225
CAT-1-2
1,2,3,4,5
2.6525
0.755
.0750
CAT-2-1^
std
CATERPILLAR multi-engine application,
(bearings sold separately)
CAT-2-1
2.5630
1.130
.1243
CAT-2-2^
std
CAT-2-2
2.5630
1.009
.1243
CAT-2-3^
std
CAT-2-3
2.2776
1.190
.0946
CAT-2-4^
std
CAT-2-4
2.2776
2.005
.0946
CAT-2-5^
std
CAT-2-5
2.1880
1.190
.1052
CAT-2-6^
std
CAT-2-6
2.1880
2.010
.1051
CAT-3-1^
std
CAT-3-1
2.8745
1.190
.1258
CAT-3-2^
std
CAT-3-2
2.8745
2.000
.1258
CAT-4-1^
std
CAT-4-1
3.0250
1.010
.1360
CAT-4-2^
std
CAT-4-2
3.0250
1.310
.1360
CH-2
.010
.020
.030
CHEV, GM, GMC Truck L6 cyl, 216, 224,
228, 235, 236, 248, 256, 261, 270, 302
(37-68)
CH-2-1
CH-2-2
CH-2-3
CH-2-4
1
2
3
4
2.1599
2.0975
2.0350
1.9725
1.125
0.937
0.937
0.937
.0644
.0644
.0644
.0644
CH-3
.010
.020
.030
CHEV, GM, GMC Truck, PONT L6 cyl,
235, 261 (41-63)
CH-3-1
CH-3-2
CH-3-3
CH-3-4
1
2
3
4
2.2850
2.2225
2.1600
2.0975
1.125
0.937
0.937
0.937
.0641
.0641
.0641
.0642
CH-4
.010
.020
.030
CHEV, GM, GMC, PONT V-8 cyl,
265, 283, 327 (55-63)
CH-4-1
CH-4-2
CH-4-3
CH-4-4
1
2
3,4
5
2.0200
2.0100
2.0000
2.0100
0.740
0.740
0.740
0.940
.0744
.0694
.0644
.0694
CH-4A
Chevrolet small block V-8 + .010 oversize
CH-4-1S
1,2,3,4,5
2.0300
0.740
.0795
HP version (see CH-4 listing)
CHP-4-1
CHP-4-2
CHP-4-3
CHP-4-4
1
2
3,4
5
2.0200
2.0100
2.0000
2.0100
0.740
0.740
0.740
0.940
.0744
.0694
.0644
.0694
GM/GMC V-8 348 & 409 (58-65)
CH-5-1
CH-5-2
CH-5-3
CH-5-4
1
2
3,4
5
2.0200
2.0100
2.0000
2.0100
0.860
0.860
0.860
0.940
.0744
.0694
.0644
.0694
CHEV, GM, GMC Truck, PONT L4 cyl,
153 (62-70); 181 (62-70) 6 cyl, 292 (63-70)
CH-5-2
CH-5-3
3
1,2
2.0100
2.0000
0.860
0.860
.0694
.0644
BUICK, GM, GMC, OLDS, PONT L6 cyl,
194, 230, 250, 292 (62-72)
L6 cyl, 250/4.1L (71-84)
CH-5-2
CH-5-3
1,4
2,3
2.0100
2.0000
0.860
0.860
.0694
.0644
std
CHP-4
CHP-4T (Coated)
CH-5
std
CH-6
.010
CH-7
.010
.020
.030
61
61
SET CONTENTS
CAT-2
MAX.
WALL
POSITION
std
std
HOUSING
BORE
LENGTH
CONTENTS
CAM BEARING
CAT-1^
SET CONTENTS
CAM BEARING
SET NO.
HOUSING
BORE
LENGTH
MAX.
WALL
CONTENTS
POSITION
BUICK, CHEV, GM, GMC, OLDS, PONT V-8,
262, 265, 283, 302, 305, 307, 327, 350 (64-96)
STUDE 283, 327 (65-66)
CH-4-1
CH-4-2
CH-4-3
1
2,5
3,4
2.0200
2.0100
2.0000
0.740
0.740
0.740
.0744
.0694
.0644
CHP-4-1
CHP-4-2
CHP-4-3
1
2,5
3,4
2.0200
2.0100
2.0000
0.740
0.740
0.740
.0744
.0694
.0644
CHEVROLET V-8 262, 267, 302, 305, 307,
327, 350 +.010 OD, (64-ON)
CHP-4-11
1,2,3,4,5
2.0300
0.740
.0744
CHEVROLET V-8 262, 267, 302, 305, 307,
327, 350 +.020 OD (64-ON)
CHP-4-12
1,2,3,4,5
2.0400
0.740
.0844
CHEVROLET V-8 262, 267, 302, 305, 307,
327, 350 +.030 OD (64-ON)
CHP-4-13
1,2,3,4,5
2.0500
0.740
.0894
CHEVROLET V-8 262, 267, 302, 305, 307,
5.3L 327, 350 +.040 OD (64-ON)
CHP-4-14
1,2,3,4,5
2.0600
0.740
.0944
CHEV, CHEV Truck, GM V-8 366, 396, 427
(65-76)
CH-12-1
CH-12-2
CH-12-3
CH-9-4
1
2
3,4
5
2.1400
2.1300
2.1200
2.1300
0.860
0.980
0.980
0.980
.0941
.0891
.0841
.0894
Chevrolet, GM V-8 4.8L 293ci Vin V, 5.3L 325ci
Vin T, 5.7L 346ci Mark III Vin G, R; 6.0L 364ci Vin
U. Truck, SUV, LS-1 1997-2000 Corvette
CH-10-1
CH-10-2
CH-10-3
1,5
2,4
3
2.3270
2.3171
2.3073
0.630
0.630
0.630
.0790
.0740
.0692
BUICK, CHEV, GM, GMC, OLDS, PONT L6 cyl,
250, 292 (71-90)
CH-5-3
1,2,3,4
2.0000
0.860
.0644
.010
CHEV, GM, GMC V-8 cyl,
366, 396, 400, 402, 427, 7.4L 454 (67-95)
CH-12-1
CH-12-2
CH-12-3
1
2,5
3,4
2.1400
2.1300
2.1200
0.860
0.980
0.980
.0941
.0891
.0841
CHP-12
CHP-12-1
CHP-12-2
CHP-12-3
1
2,5
3,4
2.1400
2.1300
2.1200
0.860
0.980
0.980
.0941
.0891
.0841
CHEVROLET V-8 366, 396, 402, 427, 454
+.010 OD (67-ON)
CHP-12-11
CHP-12-21
1
2,3,4,5
2.1500
2.1500
0.860
0.980
.0991
.0991
CHEVROLET V-8 366, 396, 402, 427, 454
+.020 OD (67-ON)
CHP-12-12
CHP-12-22
1
2,3,4,5
2.1600
2.1600
0.860
0.980
.1041
.1041
ASTRE, GM, OLDS, PONT, VEGA 122/2.0L;
140/2.3L (71-77)
CH-13-1
CH-13-2
1
2,3,4,5
2.4125
2.4125
0.680
0.680
.0643
.0643
BUICK, CHEV, GM, OLDS, PONT & JEEP
L4 cyl 151 (77-93) AMC L4 cyl 151 (80-84),
CHEVROLET Truck Type A&E, V6 181/3.0L
CHEVROLET Marine Eng.
CH-5-3
1,2,3
2.0000
0.860
.0644
.010
CHEV, GM, GMC Truck 200/3.3L; 229/3.8L;
4.3L/262; Includes Turbo (78-96)
CH-4-1
CH-4-2
CH-4-3
1
2,4
3
2.0200
2.0100
2.0000
0.740
0.740
0.740
.0744
.0694
.0644
CHP-17
CHP-4-1
CHP-4-2
CHP-4-3
1
2,4
3
2.0200
2.0100
2.0000
0.740
0.740
0.740
.0744
.0694
.0644
BUICK, CHEV, JEEP, OLDS, V-6 173ci/2.8L;
189, 191ci/3.1L (80-94), 207ci/3.4L V6 (91-96)
ISUZU 173ci/2.8L LL2, LG6
CH-18-1A
CH-18-2
CH-18-4
1
2,3
4
2.0100
1.9995
2.0095
0.625
0.630
0.625
.0691
.0640
.0691
CHEVROLET (Special wide #2 & 3 position)
Same applications as above
CH-18-1A
CH-18-2A
CH-18-4
1
2,3
4
2.0100
1.9995
2.0095
0.625
0.720
0.625
.0691
.0640
.0691
CH-8
.010
.020
.030
CHP-8
CHP-8T (Coated)
CHP-8R1
std
CHP-8R2
std
CHP-8R3
std
CHP-8R4
std
CH-9A
.010
CH-10
std
CH-11
.010
.020
.030
CH-12
CHP-12T (Coated)
CHP-12R1
std
CHP-12R2
std
CH-13
.010
CH-16
.010
CH-17
CHP-17T(Coated)
CH-18
.010
CH-18A
.010
62
SET NO.
HOUSING
BORE
LENGTH
MAX.
WALL
BUICK, CAD, CHEV Type B, P, CHEVROLET
Truck type Y, GM, OLDS, PONT. L4cyl 1.8L
& 121ci, 122ci/2.0L J, N cars (82-89)
CASE 4 cyl, 188-207 Series
CH-19-1
CH-18-4
CH-18-2
1
2,5
3,4
2.0199
2.0095
1.9995
0.625
0.625
0.630
.0741
.0691
.0640
BUICK, CHEV, GM, OLDS, PONT L4
151ci/2.5L (85-91)
CH-20-1
1,2,3
2.0000
0.710
.0644
std
CH-21
CHEVROLET V-6, 262ci/4.3L T, V Series (92-ON)
CH-4-1
CH-4-2
CH-4-3
1,4
3
2
2.0200
2.0100
2.0000
0.740
0.740
0.740
.0744
.0694
.0644
BUICK, OPEL 4 cyl 110 (1800cc) (76-79)
CHEV LUV 4 cyl (72-82) ISUZU 1325cc
(G130), 1471cc (G150), 1584cc (G-161, S,
SS, W, Z), 1817cc (CG-180, S, W, WE, Z)
(66-ON) (Gas & 4FB1 Diesel)
AGB-14-1
1,2,3
1.8895
0.984
.0586
GM 4.3L VIN"W" Balance Shaft
Includes install tool
CHG-15-1
1
1.8740
0.835
.1860
DOHC 24 valve Chevrolet V-6 Type X Eng.
casting #10127450. Chev Lumina & Mini-Van,
Monte Carlo, Venture (aux. shaft w wide #1 pos.)
CHG-22-1
CH-18-2
CH-18-4
1
2,3
4
2.0100
1.9995
2.0095
1.172
0.630
0.625
.0691
.0640
.0691
CONTINENTAL & AMC JEEP 4 cyl, 69ci
LY/PY69,Y69/Y4069, 91ci LY/PY91, Y91/4091,
Y4091, 112ci BY4112, Y112, Y4112,
L4 151ci/2.5L CONTNENTAL & OLIVER P-Y
Series (66-67)
K-1-2
K-1-3
K-1-4
1
2
3
1.9375
1.8810
1.3748
0.937
1.620
1.156
.0630
.0628
.0628
CONTINENTAL 253ci-M6253, 271ci-K6271, M271
M6271, 38B, 40B 290ci-K6290, M290, M6290
330ci-K6330, M330, M6300, M6330, M6338
363ci-K6363, M363, M6363 427ci-K6427
MACK TRUCK 253ci-EN253, 271ci-EN271,
290ci-EN290, 330ci-EN330
CO-7-1
CO-7-2
CO-7-3
CO-7-4
1
2
3
4
2.3743
2.3120
2.2495
1.9370
1.094
1.000
1.000
1.250
.0940
.0940
.0940
.0940
CONTINENTAL, OLIVER 4 cyl,
F-124-135-140-162-163-198
A/F 4124-40-42-62-63, F/LF/PF 140,
(Includes Oliver tractor)
F/FS/LF/PF 162; MACK F163 & F 245
K-1-1
K-1-3
K-1-4
1
2
3
2.0000
1.8810
1.3748
0.875
1.620
1.156
.0628
.0628
.0628
IHC 4CYL 193ci/3.2L D193 Tractor/Industrial
(Continental Eng.)
CO-9-1
CO-9-2
CO-9-3
1
2
3
1.9375
1.8750
1.8125
1.323
0.573
1.135
.0626
.0626
.0626
CUMMINS 6cyl GNH250, H, C230N, NRT, NT
Series.
Formula & Super 230, 250, 270, 290, 300, 350
5 ½" bore
CU-1-1
CU-5-2A
1
2,3,4,5,6,7
2.1290
2.1250
2.250
1.685
.0644
.0644
std
CUMMINS 6 cyl 855 Big cam Eng.
N, N14, NH-NT-NTA-NTC Series
CU-9-1
CU-9-2
CU-8-1
1,2,4,6
3,5
7
2.6870
2.6870
2.6870
1.685
2.185
1.685
.0939
.0939
.0939
CU-10
CUMMINS 4 cyl, H-NH Series
CU-1-1
CU-5-2A
1
2,3,4,5
2.1290
2.1250
2.250
1.685
.0644
.0644
CUMMINS V-8 185, 210, 352, 378, 470, 504, 555
& Phase 5 Engs. w/ 2" camshaft
CU-11-1
CU-11-2
1,5
2,3,4
2.1870
2.1870
1.905
0.905
.0932
.0932
CUMMINS V-6, 352, 378, 504, 555 w/ 2"
camshaft
CU-11-1
CU-11-2
1,4
2,3
2.1870
2.1870
1.905
0.905
.0932
.0932
CUMMINS 6 cyl 360ci/5.9L Diesel
"B" series Cummins
CU-12-1
1
2.2535
1.005
.0620
std
CU-13^
CUMMINS Formula 903, V903, VT903 V-8 Engs.
CU-13-1
CU-13-2
1,5
2,3,4
2.6870
2.6870
1.810
1.070
0.0937
0.0937
CH-19
CH-20
.010
CHG-14**
std
CHG-15**^
std
CHG-22**
std
CO-3
.010
.020
.030
CO-7
std
CO-8
.010
.020
.030
CO-9^
std
CU-5A
std
CU-9
std
CU-11
std
CU-11A
std
CU-12
std
63
63
SET CONTENTS
POSITION
CAM BEARING
CONTENTS
.010
SET CONTENTS
CAM BEARING
SET NO.
HOUSING
BORE
LENGTH
MAX.
WALL
CONTENTS
POSITION
CUMMINS 6, NH-NT-NTA-NTC Series
CU-14-1
1,2,3,4,5,6,7
2.6245
1.690
.0621
DATSUN/ NISSAN 4 cyl 988cc (A-10),
1171cc (A-12), 1237cc (A-12A), 1288cc
(A-13), 1397cc (A-14), 1487cc (A-15) (65-ON)
L4 1.4L/1397cc (A-14), 1.5L/1488cc (A-15)
(77-82)
DA-1-1
DA-1-2
DA-1-3
DA-1-4
DA-1-5
1
2
3
4
5
1.8509
1.8312
1.8115
1.7918
1.7495
0.930
0.555
0.555
0.555
0.555
.0625
.0625
.0625
.0625
.0625
DATSUN 4 cyl 1189cc 311, 312, 320, 410
(E-1 Engs.) 4 cyl 1299cc 411, 520, 521 (J-13
Engs.) 4 cyl 1483cc Forklift (J-15 Eng.)
AUSTIN-MG 4 cyl, 1198, 1489, 1588, 1622,
1798cc (53-80) NASH w/Morris Eng. 4cyl
73ci/1.2L, 91ci/1.5L (54-55)
DA-2-1
DA-2-2
DA-2-3
1
2
3
1.9155
1.8555
1.7495
1.455
1.070
0.812
.0624
.0624
.0624
DATSUN/ NISSAN 4 cyl 1488cc (G),
1595cc (R), 1883cc (H), 1982cc (H, U20),
1991cc (SD20), 2164cc (SD-22), 2289cc
(SD 23), 2488cc (SD25) (60-ON), 6cyl 2494ccTD25 Diesel (86-90) 2663cc TD 27 Diesel
(86-90) L6 3.0L/2974cc (H-30)
DA-3-1
DA-3-2
DA-3-3A
1
2
3
1.9155
1.8555
1.7495
0.945
0.865
0.947
.0625
.0625
.0625
DATSUN/ NISSAN 6 cyl 3246cc (SD33) Diesel
(66-79)
DA-3-1
DA-3-2
DA-3-3A
1
2,3
4
1.9155
1.8555
1.7495
0.945
0.865
0.947
.0625
.0625
.0625
MERCEDES-BENZ 6cyl 5.7L/5675cc OM352,
OM352A (I&II Series) (79-90)
DB-1-1
DB-1-2
DB-1-3
DB-1-4
1
2
3
4
2.3630
2.3630
2.3630
2.3630
1.027
1.027
1.027
1.027
.0789
.0838
.0887
.0936
DETROIT DIESEL 2cyl 142ci/2.3L 2-71 Series
(balance shaft and cam set)
DE-1-1
1,2,3,4,5
2.2505
1.550
.0925
DE-2-1
DE-2-2
1,3 (4 pcs.)
2 (1 pcs.)
2.3755
2.3655
1.505
1.505
.0943
.0893
std
DETROIT DIESEL 2cyl 106ci/1.7L 2-53, 2-53N
Series (balance shaft and cam set)
DETROIT DIESEL 3cyl 159ci/2.6L 3-53, 3-53N
Series (balance shaft and cam set)
DE-2-1
DE-2-2
1,3 (4 pcs.)
2 (2 pcs.)
2.3755
2.3655
1.505
1.505
.0943
.0893
DE-4
DETROIT DIESEL 8.2L
DE-4-1
1,2,3,4,5
2.7216
0.710
.0774
DETROIT DIESEL 6V-53
DE-2-1
DE-2-2
1,4
2,3
2.3755
2.3655
1.505
1.505
.0943
.0893
+.010 oversized DETROIT DIESEL 6V-53
DE-2-1R1
DE-2-2R1
1,4
2,3
2.3855
2.3700
1.505
1.505
.0993
.0943
DETROIT DIESEL 71 Series, Multi engine appl.
(balance shaft set (8 brgs) semi)
DETROIT DIESEL 71 Series
DE-6-1S
1.6855
1.072
.1020
DE-6-1WS
1,2,3,4,5,6,
7,8
1,2,3,4
2.1563
0.122
DETROIT DIESEL 71 Series, Multi engine appl.
DE-6-2
2.1880
1.323
.3430
DETROIT DIESEL 4-53 Series
DE-2-1
DE-2-2
1,5 (4 pcs.)
2,4 (2 pcs.)
2.3755
2.3655
1.510
1.510
.0942
.0892
CU-14^
std
DA-1
std
DA-2
std
DA-3A
std
DA-5
std
DB-1^
std
DE-1^
std
DE-2
std
DE-2A^
std
DE-5
std
DE-5R1
std
DE-6S^
semi
DE-6-1WS^
std
DE-6-2^
std
DE-7^
std
DI-1^
DE-2-3
3 (3 pcs.)
2.3555
1.510
.0842
DAIHATSU 4cyl 955cc, FE Series (64-77)
DI-1-1
DI-1-2
DI-1-3
1
2
3
1.5760
1.5760
1.5760
0.787
0.787
0.787
.0596
.0695
.0793
DAIHATSU 4cyl 2.5L/2530cc Diesel (69-82)
2.8L/2765cc DL Series Diesel (83-88)
DI-2-1
DI-2-2
DI-2-3
1
2
3
1.9695
1.9695
1.9695
0.782
0.782
0.782
.0596
.0695
.0793
std
DI-2^
std
64
SET NO.
FORD 8 cyl, 221, 239, 255 (32-54)
F-1-1
F-1-2
1,3
2
1.9280
1.9280
1.600
1.312
.0648
.0648
FORD, FORD Industrial, FORD Tractor
L6 cyl, 215, 223, 242, 262, 266 (52-66)
F-22-1
F-7-2
1,2,4
3
2.0580
2.0580
0.875
0.875
.0649
.0649
F-9A
.010
.020
.030
FORD, FORD Industrial V-8 cyl, 239,
256, 272, 292, 312 (54-64)
F-9-1
F-9-3
1
2,3,4,5
2.0580
2.0580
0.875
0.620
.0648
.0648
F-9B
.010
.020
.030
FORD, FORD Industrial 8 cyl, 239, 256, 272,
292 (54-66) (For cams w/cross-drilled #3 journal)
F-9-1
F-9-2B
1
2,3,4,5
2.0580
2.0580
0.875
0.620
.0648
.0648
F-11
FORD V-8 368 (56-57)
F-8-1
F-11-2
1,5
2,3,4
2.2500
2.2500
0.875
0.755
.0618
.0618
FORD, FORD Truck V-8 cyl, 302, 332 (56-64)
F-12-1
F-11-2
F-8-1
1
2,3,4
5
2.600
2.2500
2.2500
0.755
0.755
0.875
.0617
.0618
.0618
FORD, FORD Industrial, FORD Truck
V-8 401, 475, 477, 534 (58-81)
F-16-1
F-16-2
1
2,3,4,5
2.6025
2.4985
0.670
0.670
.0629
.0629
FORD V-8 cyl, 221, 255, 260, 289, 302, 351,
351W (62-96)
F-18-1
F-18-2
F-18-3
F-18-4
F-18-5
1
2
3
4
5
2.2040
2.1890
2.1740
2.1590
2.1440
0.660
0.660
0.660
0.660
0.660
.0602
.0602
.0602
.0602
.0602
FORD HP version (see F-18 listing)
FP-18-1
FP-18-2
FP-18-3
FP-18-4
FP-18-5
1
2
3
4
5
2.2040
2.1890
2.1740
2.1590
2.1440
0.660
0.660
0.660
0.660
0.660
.0602
.0602
.0602
.0602
.0602
FORD Products V-8 430, 462 (61-68)
F-19-1
F-19-2
F-19-3
F-19-4
F-14-5
1
2
3
4
5
2.4480
2.4330
2.4180
2.4030
2.3880
0.710
0.710
0.710
0.710
0.710
.0609
.0609
.0609
.0609
.0610
FORD, FORD Industrial L6 cyl, 223, 262 (54-66)
F-22-1
1,2,3,4
2.0580
0.875
.0649
FORD L6 cyl, 240 (65-85)
300ci/4.9L (77-85)
F-23-1A
1,2,3,4
2.1445
0.860
.0624
FORD, FORD Truck L6 cyl, 240-300 (65-85)
F-23-1B
1,2,3,4
2.1445
0.860
.0624
FORD V-8 cyl, 427 (63-69)
F-33-1
F-24-2
F-24-3
F-24-4
F-24-5
1
2
3
4
5
2.3100
2.2950
2.2800
2.2650
2.2500
0.620
0.620
0.620
0.620
0.560
.0912
.0844
.0769
.0694
.0619
(For cams w/grooved #3 journal)
std
F-12
std
F-16
.010
F-18
.010
.020
.030
FP-18
FP-18T (Coated)
F-19
std
F-22
.010
.020
.030
F-23A
.010
.020
.030
F-23B
.010
F-24
std
65
SET CONTENTS
F-7
MAX.
WALL
POSITION
.010
.020
.030
.010
.020
.030
HOUSING
BORE
LENGTH
CONTENTS
CAM BEARING
F-1
SET CONTENTS
CAM BEARING
SET NO.
HOUSING
BORE
LENGTH
MAX.
WALL
CONTENTS
POSITION
FORD V-8 351C-351M/5.7L, 400ci/6.6L (70-82)
F-26-1
F-18-2
F-18-3
F-18-4
F-18-5
1
2
3
4
5
2.2500
2.1890
2.1740
2.1590
2.1440
0.660
0.660
0.660
0.660
0.660
.0616
.0602
.0602
.0602
.0602
FP-26-1
FP-18-2
FP-18-3
FP-18-4
FP-18-5
1
2
3
4
5
2.2500
2.1890
2.1740
2.1590
2.1440
0.660
0.660
0.660
0.660
0.660
.0616
.0602
.0602
.0602
.0602
FORD, BRITISH FORD L4 cyl 67ci/1.1L KSG
Eng. 98ci/1.6L/1598cc FORD Fiesta (59-80)
F-28-1
F-28-2
F-28-3
1
2
3
1.6890
1.6890
1.6890
0.790
0.685
0.790
.0633
.0633
.0633
FORD L4 cyl 1.6L/1593cc British Ford
122ci/2.0L/1993cc MERCURY CAPRI,
FORD MUSTANG, FORD PINTO (71-74)
F-29-1
F-29-2
F-29-3A
1
2
3
1.7755
1.8785
1.8935
0.785
0.665
0.625
.0600
.0600
.0600
FORD V-8 cyl, 370, 429, 460 (68-96)
MERCRUISER/MERCURY MARINE 4cyl,
224ci/3.7L 470,470R Mercruiser/Mercury Marine
F-30-1
1,2,3,4,5
2.2500
0.580
.0620
HP version (see F-30 listing)
FP-30-1
1,2,3,4,5
2.2500
0.580
.0620
Oversized OD HP version (see F-30 listing)
FP-30-1R
1,2,3,4,5
2.2550
0.580
.0645
FORD; CAPRI 6 cyl 2.6L/2551cc Includes
German Eng., BOBCAT, MUSTANG II, RANGER,
PINTO V-6 2.8L/2792cc, 159-171ci (72-79)
F-31-1
F-31-2
F-31-3
F-31-4
1
2
3
4
1.7734
1.7585
1.7435
1.7285
0.775
0.700
0.700
0.595
.0604
.0604
.0604
.0604
FORD L6 cyl, 144, 170 (60-78)
L6 200ci/3.3L & 250ci/4.1L (77-83)
F-32-1
F-17-2
F-17-3
F-17-4
1
2
3
4
1.9785
1.9635
1.9485
1.9335
0.720
0.720
0.720
0.720
.0832
.0757
.0682
.0607
.010
.020
.030
FORD V-8 cyl, 330, 332, 352, 359, 360, 361,
389, 390, 391, 406, 410, 427, 428, (58-71)
FORD Truck V-8 cyl, 330, 352, 359, 360, 361,
389, 390, 391, 428 (64-78)
F-33-1
F-15-2
F-15-3
F-15-4
F-15-5
1
2
3
4
5
1.7734
2.2950
2.2800
2.2650
2.2500
0.775
0.620
0.620
0.620
0.560
.0604
.0841
.0766
.0691
.0616
FP-33
FP-33-1
FP-15-2
FP-15-3
FP-15-4
FP-15-5
1
2
3
4
5
1.7734
2.2950
2.2800
2.2650
2.2500
0.775
0.620
0.620
0.620
0.560
.0604
.0841
.0766
.0691
.0616
FORD L4 cyl 122ci/2.0L & 140ci/2.3L Incl Turbo
BOBCAT, MUSTANG, PINTO (74-95)
F-34-1
1,2,3,4
1.9011
0.693
.0638
FORD L4 140 (74-91)
FORD Truck 4, 122 -140, (77-91) (Special oil
control set)
F-34-1B
1,2,34
1.9011
0.693
.0638
.010
F-34S
FORD +.020 OD (see F34 listing)
F-34-1S
1,2,3,4
1.9203
0.693
.0738
FORD 232ci/3.8L (88-00)
OHV Ford V-6 Series C, R, 3, 4, incl. supercharged
Eng. Mustang, Taurus, T-Bird, Continental, Windstar,
Mercury Sable, Passenger Car & Light Truck
(Cam brgs + Aux shaft set kit)
AGB-51-1
F-52-1
F-51-2
1,2
1,4
2,3
2.1920
2.1920
2.1770
0.635
0.635
0.555
.0694
.0694
.0619
F-26
.010
.020
.030
FP-26
FP-26T (Coated)
F-28
.010
.020
F-29
.020
F-30
.010
.020
.030
FP-30
FP-30T (Coated)
FP-30R
std
F-31
.010
F-32
.010
.020
.030
F-33
FP-33T (Coated)
F-34
.010
.030
F-34B
std
F-38
std
66
SET NO.
HOUSING
BORE
LENGTH
MAX.
WALL
FORD (MAZDA) 4 cyl, 1586, 1796, 1970cc
(70-85)
F-41-1
F-41-2
1
2,3
1.9299
1.9299
0.949
0.714
.0794
.0794
FORD V-4 1.5L/1498cc German Eng. includes
SAAB 95 V-4. 1.7L/1699cc SAAB 95, 96 V-4
(62-67)
F-42-1
F-31-3
F-31-4
1
2
3
1.7585
1.7435
1.7285
0.775
0.700
0.595
.0604
.0604
.0604
FORD Tractor 3 cyl Dextra 2000, 3000,
Super Dextra, Major 4000. 4cyl 233, 256,
401-5000 Series Gas & Diesel
F-43-1
1,2,3,4
2.5345
0.765
.0708
FORD Tractor 4 cyl Super Major 5000, 7000
6cyl 401ci/6.6L Diesel & HD
F-43-1
1,2,3,4,5
2.5345
0.765
.0708
std
F-45
FORD V-6 cyl 232ci/3.8L (82-88)
F-45-1
F-45-2
1,4
2,3
2.1920
2.1770
0.635
0.555
.0694
.0619
FORD 4 cyl 140ci/2.3L HSC, 153ci/2.5L HSC
(84-94)
TEMPO, TOPAZ, 2307cc
F-46-1
F-46-2
F-46-3
1
2,3
4
2.2047
2.1890
2.2047
0.723
0.723
0.503
.0973
.0894
.0973
FORD 6 cyl 171ci/2.8L
BOBCAT, MUSTANG II, RANGER, PINTO
F-47-1
F-47-2
F-47-3
F-47-4
1
2
3
4
1.8521
1.8371
1.8222
1.8072
0.780
0.700
0.700
0.595
.0605
.0605
.0605
.0605
FORD 6 cyl 171ci/2.8L
FORD 6 cyl 177ci/2.9L (86-92)
F-47-1
F-47-2B
F-47-3B
F-47-4
1
2
3
4
1.8521
1.8371
1.8222
1.8072
0.780
0.700
0.700
0.595
.0605
.0605
.0605
.0605
FORD, TAURUS, SABLE & VANS
V-6 183ci/3.0L (86-95)
F-48-1
F-48-2
F-48-4
1
2,3
4
2.1536
2.1339
2.1536
0.955
0.537
0.537
.0719
.0620
.0719
.010
F-48 (92-96) V-6 3.0L
FORD AEROSTAR
F-48-1
F-48-2
F-48-4A
1
2,3
4
2.1536
2.1339
2.1536
0.955
0.537
0.537
.0719
.0620
.0719
F-49
FORD, FORD Truck 6 cyl, 300/4.9L (85-95)
F-49-1
F-49-2
1,4
2,3
2.1590
2.1445
0.860
0.860
.0695
.0624
FORD, FORD Truck L6, 300/4.9L (85-95)
F-49-1B
F-23-1B
1,4
2,3
2.1590
2.1445
0.860
0.860
.0695
.0624
FORD, FORD Truck & Van V-6 244ci/4.0L
(90-96) SOHC
F-50-1
F-50-2
F-50-3
F-50-4
1
2
3
4
2.0776
2.0626
2.0476
2.0327
0.775
0.700
0.700
0.585
.0617
.0614
.0614
.0615
FORD (Same appls. as F-50 above only with
wide #4 brg)
F-50-1
F-50-2
F-50-3
F-50-4A
1
2
3
4
2.0776
2.0626
2.0476
2.0327
0.775
0.700
0.700
0.825
.0617
.0614
.0614
.0615
FORD V-6 232ci/3.8L (88-93)
FORD V-6 256ci/4.2L F150 truck (97-99)
F-52-1
F-51-2
1,4
2,3
2.1920
2.1770
0.635
0.555
.0694
.0619
FORD TRACTOR 240ci/3.9L (65-69),
242ci/4.0L (61-69), 254ci/4.2L ( 69-90)
with Dorset Diesel & Turbo Diesel
F-53-1
F-53-2
1
2,3,4
2.3135
2.3135
1.030
0.950
std
FORD TRACTOR 6cyl 360ci, 362ci, 363ci &
380ci with Dorset Diesel & Turbo Diesel
F-53-1
F-53-2
1
2,3,4,5,6
2.3135
2.3135
1.030
0.950
FA-1
FORD L4 116ci/1.9L (85-96)
FA-1-1
FA-1-2
FA-1-3
FA-1-4
FA-1-5
1
2
3
4
5
1.9035
1.8985
1.8935
1.8885
1.8835
0.925
0.925
0.925
0.925
0.925
F-41*
F-42^
std
F-43
std
F-44
.010
F-46
.010
F-47
.010
F-47B
.010
F-48
.010
F-48A
std
F-49B
.010
F-50
.010
F-50A
.010
.020
.030
F-52
.010
F-53^
std
F-54^
std
67
67
.0503
.0478
.0453
.0428
.0403
SET CONTENTS
POSITION
CAM BEARING
CONTENTS
std
SET CONTENTS
CAM BEARING
SET NO.
FA-2
FA-3*
FA-4*
std
FORD L4 98ci/1.6L (81-85)
FA-2-1
FA-2-2
FA-2-3
FA-2-4
FA-2-5
1
2
3
4
5
1.8435
1.8535
1.8635
1.8735
1.8835
0.845
0.845
0.845
0.845
0.845
.0403
.0403
.0403
.0403
.0403
FORD V-8 4.6L SOHC (91-ON)
One set per head
FA-3-2(U)
FA-3-1(L)
1,2,3,4,5,6
1,2,3,4,5,6
1.1469
1.1469
0.570
0.570
.0422
.0422
FORD V-8 4.6L DOHC (91-96)
One set per head
FA-4-3(U)
FA-4-4(U)
1,6,7,12
2,3,4,5,8,9
10,11
1,6,7,12
2,3,4,5
8,9,10,11
1.1469
1.1469
0.570
0.455
.0420
.0420
1.1469
1.1469
1.1469
0.570
0.455
0.455
.0422
.0420
.0420
1,6,7,12
2,3,4,5,8,9
10,11
1,6,7,12
2,3,4,5
8,9,10,11
1.1469
1.1469
0.570
0.455
.0420
.0420
1.1469
1.1469
1.1469
0.570
0.455
0.455
.0422
.0420
.0420
FA-3-2(L)
FA-4-1(L)
FA-4-2(L)
FA-5*
std
281ci/4.6L FORD V-8 DOHC (LATE 96-ON),
330ci/5.4L SOHC 16 valve FORD V-8 Modular
Triton Eng. (1 cam set per cyl. head reqd)
FA-4-3(U)
FA-4-4(U)
FA-5-1(L)
FA-4-1(L)
FA-4-2(L)
FD-1-1
bushing
FG-29**
std
FG-34**
std
FG-51**
std.
FG-53**
std.
FT-1^
std
FT-3
std
GM-5
.030
GM-7
.010
GMA-1
std
GMA-2*^
std
171ci 2.8L/2800cc Ford Connecting Bushing/
Water Pump Jacket to Block, 2 reqd,( OE#D2RY6178B)
FD-1-1
FORD L4 cyl 98 Eng. (78-80),
122 Eng. (71-74) 1.6L/1598cc, 1993cc
MERCURY CAPRI, MUSTANG, PINTO 2.0L
(78-80)
AGB-29-1
1
1.7750
0.500
.0606
FORD L4 cyl, 140ci/2300cc (74-90)
L4 122ci/2.0L (74-95)
AGB-34-1
AGB-34-2
1
2
1.7975
1.7775
0.500
0.500
.0714
.0614
FORD V-6 232 (88-93)
252ci/3.8L (88-91)
AGB-51-1
1,2
2.1920
0.635
.0694
FORD V6 244ci/4.0L VIN "E" SOHC Ford Explorer
Auxiliary Shaft (97-ON)
FG-53-1
FG-53-2
Front
Rear
1.8522
1.8072
1.142
0.905
.0610
.0610
FIAT 4cyl 818cc (68-71), 843cc (64-70), 903cc
(70-73)
FT-1-2
FT-1-3
2
3
1.8281
1.4148
0.590
0.590
.0597
.0964
FIAT 4cyl 1116cc (69-73), 1197cc (66-74),
1290cc (71-79), 1483cc (68-73)
FT-3-1
FT-3-2
FT-3-3
1
2
3
2.0132
1.8478
1.5739
0.555
0.625
0.590
.0600
.0596
.0597
GM, GM Truck V-6 305A, 351, 379, 401, 432,
478M (60-77)
GM-5-1
GM-5-2
GM-5-3
GM-5-4
1
2
3
4
2.1875
2.1562
2.1250
1.9725
1.680
0.880
0.880
1.150
.0641
.0641
.0641
.0641
GM, CHEV, GMC Truck 8 cyl, 379, 381ci/6.2L,
395ci/6.5L Diesel Eng. (82-99)
GM-7-1
GM-7-2
GM-7-3
GM-7-4
GM-7-5
1
2
3
4
5
2.3280
2.3190
2.3090
2.2990
2.1420
0.895
0.775
0.775
0.775
0.775
.0798
.0753
.0703
.0653
.0655
Saturn SOHC 1.9L/1901cc Vin Type 9 LKO Series
Eng. Saturn SC, SL, SW Passenger Cars
GMA-1-1
GMA-1-2
1
2,3,4,5
1.8607
1.8607
0.817
0.661
.0550
.0550
Saturn DOHC 1.9L / 1901cc 16 valve Vin Type 7,
8 Saturn LKO Eng. Saturn SC, SL, SW Passenger
GMA-2-1(U)
GMA-2-3(U)
1,6
2,3,4,5,7,8,
1.2655
1.2655
0.665
0.665
.0617
.0617
Cars
GMP-1
GMP-1T (Coated)
MAX.
WALL
POSITION
std
.010
HOUSING
BORE
LENGTH
CONTENTS
9,10
GM, OLDS 8 cyl 350ci, OLDS Rocket 2.120 hsg
bore
Bushing only
68
GMA-2-2(L)
1,6
1.2655
0.665
.0617
GMA-2-1(L)
2,3,4,5,7,8,
9,10
1.2655
0.665
.0617
GMP-1-1
1,2,3,4,5
2.1200
0.755
.0841
SET NO.
HOUSING
BORE
LENGTH
MAX.
WALL
CHP-4-3
1,2,3,4,5
2.0000
0.740
.0644
GM, CHEV 8 cyl 454ci, 502ci Bowtie block,
GMP-12
GMP-12T(Coated) 2.120 hsg bore
8 cyl Hi-Performance 55 mm camshaft journal
GMP-55^
GMP-55T(Coated) O.D.
CHP-12-3
1,2,3,4,5
2.1200
0.980
.0841
GMP-55-1
1,2,3,4,5
2.282
0.785
0.0569
H-5
AMC/JEEP V-8, 250, 287, 327 (56-70)
CAT 2 cyl starter Eng.
H-5-1
H-5-2
H-5-3
H-5-4
H-5-5
1
2
3
4
5
2.1560
2.1460
2.1360
2.1260
1.6260
0.750
0.750
0.750
0.750
1.060
.0620
.0620
.0620
.0620
.0620
HONDA ACCORD/ PRELUDE
4 cyl OHC 1.8L, 2.0L (83-90)
HA-1-1(U)
HA-1-5(L)
1,2,3,4,5
1,2,3,4,5
1.2655
1.2655
0.700
0.700
.0622
.0622
HONDA
CIVIC/CRX
HA-1-2(U)
HA-1-4(U)
HA-1-4A(U)
HA-1-5(U)
HA-1-3(L)
HA-1-5(L)
1
2,4,5
3
6
1
2,3,4,5,6
1.2655
1.2655
1.2655
1.2655
1.2655
1.2655
0.830
0.700
0.700
0.700
0.830
0.700
.0618
.0622
.0622
.0622
.0618
.0622
HONDA 2156cc/2.2L SOHC 16 valve F22A,
F22A1 Eng., VTEC F22B1 Eng. Accord, Accord
DX, LX, SE, Prelude, Prelude S. (90-97)
HONDA 2156cc/2.2L SOHC 16 valve F22B2,
F22B6 Eng. Accord, Prelude
HA-3-2(U)
HA-3-4(U)
HA-3-1(L)
HA-3-3(L)
1
2,3,4,5,6
1
2,3,4,5,6
1.1875
1.1875
1.1875
1.1875
0.735
0.535
0.735
0.535
.0422
.0422
.0422
.0422
HONDA 1590cc/1.6L SOHC 16 Valve VTEC
D16Z6 Series Eng. Honda Civic EX
HA-4-1(U)
HA-4-3(U)
HA-4-2(L)
HA-4-4(L)
1
2,3,4,5
1
2,3,4,5
1.2655
1.2655
1.2655
1.2655
1.242
0.530
1.242
0.530
.0618
.0618
.0618
.0618
ACURA 2451cc/2.5L SOHC 20 valve Honda/
Accura G25A1, G25A4 (95-98) Eng.
Accura Vigor, 2.5TL
HA-5-2(U)
HA-3-4(U)
HA-5-1(L)
HA-3-3(L)
1
2,3,4,5,6,7
1
2,3,4,5,6,7
1.2655
1.1875
1.2655
1.1875
0.788
0.535
0.788
0.535
.0618
.0422
.0618
.0422
HERCULES, OLIVER TRACTOR 4 - 6 cyl
JX Series; Military Standard
HE-1-1
HE-1-2
1,4
2,3
2.1875
2.1875
1.125
0.812
.0660
.0660
HERCULES, OLIVER TRACTOR L6 Gas Eng.
REO OH Series; 205ci/3.4L HERCULES
QX Series
HE-5-1
HE-5-2
1,4
2,3
1.8753
1.8753
1.020
0.550
.0617
.0617
HERCULES, OLIVER TRACTOR 3cyl 130ci/2.1L
DD-G0130 Series, 4cyl 149ci/2.4L DD-G0149,
D-G1500 Series, 169ci/2.8L DD-G0163,
D-G1700 Series
HE-7-1
HE-1-2
1,3
2
2.1875
2.1875
1.057
0.812
.0658
.0660
HERCULES, OLIVER TRACTOR 4cyl 173ci/2.8L
DD-G0173 Series, 199ci/3.3L DD198, D2000,
D2120, G2000, G2120 Series, 226ci/3.7L
DD-G0226, D-G2300 Series, 260ci/4.3L DD-260,
G-0260 Series, 298ci/4.9L DD298-G0298,
D-G3000 Series, 339ci/5.6L DD339-G0339,
D-G3400 Series, Hercules & Oliver JXLD Engs.
HE-7-1
HE-1-2
1,4
2,3
2.1875
2.1875
1.057
0.812
.0658
.0660
HERCULES G2300, D3000, G3000, G3400 Series
HE-7-1A
HE-1-2A
1,4
2,3
2.1862
2.1862
1.057
0.812
.0653
.0653
IHC-NAVISTAR Truck 6 cyl RD & Red Series
361, RD 372, 406, 450, 501, FBB 401, FBC 401
IN-3A-1
IN-8-2
IN-2-3
IN-2-4
1
2
3
4
2.2408
2.2207
2.2008
1.6313
1.125
1.062
1.062
1.530
.0647
.0647
.0645
.0645
IHC-NAVISTAR Tractor 4 cyl C248, C264, C281
(Gas)
IN-5-1
IN-5-2
IN-5-3
1
2
3
2.3748
2.2493
1.9993
1.438
1.469
1.063
.0644
.0642
.0643
GMP-8
std
HA-1*
std
HA-2*
.020
HA-3*
std
HA-4*^
std
HA-5*^
std
HE-1
std
HE-5
std
HE-7
std
HE-8
std
HE-8A
GM 8 cyl 350ci Bowtie block 2" hsg bore
( High performance set)
std
IN-3
std
IN-5
std
69
69
SET CONTENTS
POSITION
CAM BEARING
CONTENTS
GMP-8T (Coated)
SET CONTENTS
CAM BEARING
SET NO.
HOUSING
BORE
LENGTH
MAX.
WALL
CONTENTS
POSITION
IHC-NAVISTAR Truck 8 cyl, DV 401; 461,
478, 537, 549, 550, 605/9.0L Engs.
(Gas & Diesel)
IN-10-1A
IN-10-2
IN-10-3
IN-10-4A
1
2
3
4
2.4748
2.4438
2.4153
2.3748
1.187
1.000
1.000
1.000
.0618
.0625
.0613
.0618
IHC-NAVISTAR Truck 8 cyl, V266, V304, V345,
V392 COMMANCHE 4 cyl, L4 4-152, 4-196
Engs.
IN-11-1
IN-11-2
IN-11-3
IN-11-4
IN-11-5
1
2
3
4
5
2.2313
2.2213
2.2113
2.2013
2.1913
0.710
0.645
0.645
0.645
0.750
.0647
.0647
.0647
.0647
.0647
IHC-NAVISTAR Tractor 4 D166, D188, D281,
C248
IN-3A-1
IN-8-2
IN-8-3
1
2
3
2.2408
2.2207
2.2007
1.125
1.062
1.062
.0647
.0647
.0647
IHC-NAVISTAR, IHC Truck & Tractor
4, 6, & 8 cyl Gas, Diesel C221, 236, 263, 282,
291, 301, D 236, 282, 301
INTERNATIONAL Truck 6, BD 220, 240, 264
IN-3A-1
IN-8-2
IN-8-3
IN-8-4
1
2
3
4
2.2408
2.2207
2.2007
1.6313
1.125
1.062
1.062
1.312
.0647
.0647
.0647
.0645
IHC-NAVISTAR L4 C152, 164, 169, HD174, 175
IHC Tractor 4 cyl, C248, C281
IN-15-1
IN-15-2
IN-15-3
1
2
3
2.0618
1.9368
1.4993
1.000
1.375
1.000
.0643
.0643
.0643
IHC-NAVISTAR 6 cyl 361ci/5.9L D361, DT361,
407ci/6.7L D407, DT407
IN-16-1
IN-8-2
IN-16-3
IN-2-4
1
2
3
4
2.5610
2.2207
2.2010
1.6313
1.125
1.062
1.060
1.530
.0645
.0647
.0645
.0645
IHC-NAVISTAR Truck V-8 cyl, MV404,
MV446, MV485 FORD V-8, 420ci/6.9L,
444, 445ci/7.3L (83-02)
.020 oversize (see IN-17 listing)
IN-17-1
IN-17-2
1
2,3,4,5
2.2313
2.2313
0.785
0.650
.0647
.0647
IN-17-1S
IN-17-2S
1
2,3,4,5
2.2513
2.2513
0.785
0.650
.0647
.0647
IHC-NAVISTAR; IHC Tractor 4 cyl,
B 275, BC 144, BD 144, BD 154
IN-18-1
IN-18-2
IN-18-3
1
2
3
1.9430
1.7083
1.6303
1.095
1.005
0.790
.0645
.0641
.0641
IHC-NAVISTAR; IHC Truck,Tractor & Industrial
6cyl, 312 D, DT & UD. 360 D, DT, & UD.
D414, DT414, D436, DT436, D466, DT466,
DT466B, DT466C, DTA466C, DTI466B, DTI466C
IN-19-1
IN-19-2
IN-19-3
IN-19-4
1
2
3
4
2.5013
2.4813
2.4613
2.4413
1.010
0.709
0.709
0.710
.1078
.0980
.0880
.0780
IHC-NAVISTAR 8cyl 573ci/9.4L, DT573, V800
DVT573, DVTI573, 800ci/13.1L DV800, DVT800,
IN-20-1
1,2,3,4,5
2.7475
1.010
.0625
ISUZU Diesel 4cyl 1.8L/1817cc 4FB1 Chevette
Diesel, T1000 Pontiac (81-86)
IZ-1-1
1,2,3,4,5
1.2215
0.630
.0591
ISUZU Diesel 4cyl 2.0L/1951cc C190 Diesel.
2.2L/2207cc C220, C221 Diesel. 2.2L/2238cc
C223, C223T. 2.4L/2369cc C240 Diesel,
includes CHEVROLET Truck (64-88)
IZ-2-1
IZ-2-2
IZ-2-3
1
2
3
2.0479
2.0480
2.0480
0.984
0.984
0.984
.0790
.0790
.0790
std
ISUZU Diesel 4cyl 2.0L/1951cc C190 Diesel
(83-84) 2.2L/2238cc, C223, C233T
CHEVROLET Truck (83-89)
IZ-3-1
IZ-3-2
IZ-3-3
1
2
3
2.0486
2.0486
2.0486
0.866
0.866
0.866
.0797
.0797
.0797
IZ-4^
ISUZU Diesel 2.0L/1991cc C 201 Diesel (69-90)
IZ-4-1
IZ-4-2
IZ-4-3
1
2
3
2.0484
2.0484
2.0484
0.866
0.866
0.866
.0770
.0770
.0787
ISUZU Diesel 2.5L/2499cc 4JA1, 4JB1 Diesel,
4JB1-T Turbo-Diesel (85-90)
IZ-5-1
IZ-5-2
2
2,3
2.1274
2.1274
0.984
0.866
.0797
.0797
ISUZU Diesel 2.8L/2775cc 4BA1, 3.6L/3595cc
4BB1 Diesel (73-76)
IZ-6-1
IZ-6-2
1
2,3,4
2.3637
0.787
0.787
.0785
.0785
ISUZU Diesel 6cyl 2.8L/2775cc 4BA1, 3.6L/
3595cc 4BB1, 3.9L/3856cc 4BD1, 4BD-1T
Turbo-Diesel (77-90)
IZ-6-1
IZ-6-2
1
2,3
2.3637
2.3637
0.787
0.787
.0785
.0785
IN-10A
std
IN-11
.010
.020
.030
IN-12
std
IN-14
.010
.020
.030
IN-15
std
IN-16
std
IN-17
std
IN-17R2
std
IN-18
std
IN-19
std
IN-20^
std
IZ-1^
std
IZ-2^
std
IZ-3^
std
IZ-5^
std
IZ-6^
std
IZ-7^
std
70
SET NO.
HOUSING
BORE
LENGTH
MAX.
WALL
ISUZU Diesel 6cyl 5.0L/4978cc D500, 5.4L/
5393cc 6BB1, 5.8L/5785cc 6BD1, 6BD1-T
(Turbo-Diesel), 6.1L/6130cc 6BF1, 6.5L/6494cc
6BG1 (72-90)
IZ-6-1
IZ-6-2
1
2,3,4,5,6
2.3637
2.3637
0.787
0.787
.0785
.0785
WILLYS, AMC, FORD, JEEP L4 cyl, 134
(39-73) MITSUBISHI 4 cyl 2199cc (JH4)
Gas Eng. (56-ON) IHC Truck & Tractor
L6, GRD 175,175A, 214, 214A, 233, 233A, 242,
260
J-1-1
1
2.3165
1.125
.0645
JAGUAR 6cyl 2.5L/2483cc, 4.2L/4235cc
DOHC (55-93)
JA-1-1
1,2,3,4
1.5070
1.317
.0752
std
JOHN DEERE 4 cyl, 1010, 2010, 115, 145, 165
(Gas & Diesel)
JD-1-1
JD-1-2
1
2,3
1.9280
1.9280
1.181
0.938
.0579
.0579
JD-2
JOHN DEERE 6 cyl combines 217-248 Series
JD-1-1
JD-1-2
1
2,3,4
1.9280
1.9280
1.181
0.938
.0579
.0579
JOHN DEERE 4 cyl, 3010, 3020 Series
JD-3-1
1,2,3
2.5000
1.000
.0614
JOHN DEERE 6 cyl, 329ci/5.4L, 360ci/5.9L,
466ci/ 7.6L 4010, 4020, 5010, 5020, 6619 Series
JOHN DEERE 2cyl 100ci/1.6L 40, 320, 330,
435 Series. 113ci/1.9L 420, 430, 440 Series
JD-3-1
1,2,3,4
2.5000
1.000
.0614
JD-5-1
JD-5-2
1
2
1.9280
1.9280
1.598
1.220
.0577
.0577
John Deere 6076D, 6076T, 6076A, 6076H Diesel &
Turbo-Diesel Eng.
JOHN DEERE 4cyl, 202ci, 219ci, 239ci, 276ci.
202,219,239,276 series. Forklift, Combine, Loader,
Tractor. (Bal set)
JD-6-1
1,2,3,4
2.7559
1.005
.0573
JDG-7-1
1,2,3,4,5,6
1.6250
1.090
.0608
JOHN DEERE .076 Oversized Balance Shaft Set.
See applications above under JDG-7
JDG-7-1R
1,2,3,4,5,6
1.7020
1.090
.0998
CONTINENTAL 6 cyl, F170, 186, 199, 206, 209,
218, 226, 227, 242, 244, 245
AMC, JEEP, MILTARY STD, OLIVER, MACK,
CONTINENTAL L4 F124/4124, LF/PF 124,
F140/4140, F162/4162, LF/PF162 & F163, L6
DS6202/202, PD 202, F209/6209, PF 209, 24B,
F226/6226, F227, F242/6242, F244, F245/6245,
WILLYS 226F, 226L
K-1-1
K-1-2
K-1-3
K-1-4
1
2
3
4
2.0000
1.9375
1.8810
1.3748
0.875
0.937
1.620
1.156
.0628
.0630
.0628
.0628
MACK Truck 6cyl 672ci/11.0L EN,END,ENDS
ENDT 672, 673 680CI/11.0l E6, EM6 Series
707/11.6L EN707, 711 Series with slotted #2
and #5 position
MA-5-1
MA-5-2
MA-5-3
MA-5-4
1
2,5
3,4,6
7
2.6235
2.6235
2.6235
2.6235
1.385
1.010
1.010
1.380
.0910
.0905
.0910
.1853
MACK Truck 6cyl 672ci/11.0L END 673,675,676,
ENDL, ENDLT, ENDT673, 675, 676, ETAB 673,
675, 676, ETAY-ETAZ 673, 675, ETS,
ETSZ 673, 676, 677, ETSZ 680ci/11.0L E6,
EM6 Series 707ci/11.6L EN707, 711 Series
before 4/84 with #7 journal of 2.25" diameter
MA-5-1
MA-5-3
MA-3A-1
1
2,3,4,5,6
7
2.6235
2.6235
2.6235
1.385
1.010
1.380
.0910
.0910
.1852
MACK Truck 6cyl 672ci/11.0L, 680ci/11.0L,
707ci/11.6L EN 707, 711 Series same as above
except for late engines after 4/84 with #7 journal
of 2.44" diameter
MA-5-1
MA-5-3
1
2,3,4,5,6,7
2.6235
2.6235
1.385
1.010
.0910
.0910
Mack - Cam Thrust Washer (2) w dowel pins
MA-7-1WS
3.8170
(OD)
0.187
MACK Truck 6cyl 761ci/12.5L E7 Series, E7350, E7-400
MA-8-1
MA-5-3
1
2,3,4,5,6,7
2.6235
2.6235
1.385
1.010
.0905
.0910
MACK Truck 8cyl 864ci/14.2L END 864 Series
866ci/14.2L END 865, END 866 Series
MA-9-1
MA-5-3
1
2,3,4,5
2.6235
2.6235
1.225
1.010
.0910
.0910
IZ-8^
J-1
.010
.020
.030
JA-1^
std
JD-1
std
JD-3
std
JD-4
std
JD-5^
std
JD-6
std
JDG-7**
std
JDG-7R**
std
K-1
.010
.020
.030
MA-5^
std
MA-6^
std
MA-7^
std
MA-7-1WS^
std
MA-8^
std
MA-9^
std
71
71
SET CONTENTS
POSITION
CAM BEARING
CONTENTS
std
SET CONTENTS
CAM BEARING
SET NO.
MAG-10**^
HOUSING
BORE
LENGTH
MAX.
WALL
CONTENTS
POSITION
Mack 6 cyl. END 672, 673 series, Aux Shaft set.
MAG-10-1
MAG-10-2
Front
Rear
2.3115
2.2495
1.760
1.760
.1237
.1243
MITSUBISHI 6 cyl 243ci/4.0L/3988cc 6DR5
Diesel Eng. (78-79)
MI-1-1
MI-1-2
MI-1-3
MI-1-4
1
2
3
4
2.2448
2.2448
2.2448
2.2448
1.417
1.024
1.024
1.024
.0490
.0490
.0589
.0785
MITSUBISHI 4cyl 2.7L/2659cc 4DR5 Diesel
(70-91)
MI-2-1
MI-2-2
MI-2-3
1
2
3
2.2448
2.2448
2.2448
1.417
1.024
1.024
.0490
.0490
.0589
MITSUBISHI 4CYL 3.3L/3298cc 4D30, 4D31,
4D31T, 4D31A, 4D31AT Diesel & Turbo Diesel
3.6L/3567cc 4D32 Diesel (82-88)
MI-3-1
MI-3-2
MI-3-3
1
2
3
2.3035
2.2839
2.2445
1.624
1.033
1.191
.0790
.0690
.0790
MITSUBISHI 4 cyl OHC 1.6L, 1.8L, 2.4L,
2.6L (78-ON) ISUZU 4 cyl OHC 1.8L, 2.0L,
2.3L, 2.6L (81-92)
MIA-1-3(U)
MIA-1-1(U)
MIA-1-4(L)
1
2,3,4,5
1,2,3,4,5
1.4225
1.4225
1.4225
0.795
0.795
0.795
.0422
.0422
.0422
MITSUBISHI 4 cyl OHC 1.6L, 1.8L, 2.4L,
2.6L (Heavy wall, oversized OD) (78-ON)
MIA-1-7(U)
MIA-1-5(U)
MIA-1-6(L)
1
2,3,4,5
1,2,3,4,5
1.4971
1.4971
1.4971
0.793
0.793
0.793
.0792
.0792
.0792
MITSUBISHI, HYUNDAI 4 cyl OHC 1.5L
(85-ON) 4cyl 1.4L/1410cc CHRYSLER SOHC
Type J Eng. (79-84)
MIA-3-1
1,2,3
1.8918
0.685
.0403
std
MIA-4*
MITSUBISHI 4 cyl SOHC, 2.0L (73-88)
MIA-1-8(U)
MIA-1-1(U)
MIA-1-4(L)
1,5
2,3,4
1,2,3,4,5
1.4225
1.4225
1.4225
0.795
0.795
0.795
.0422
.0422
.0422
MITSUBISHI V-6 3.0L/2972cc SOHC
One set per head (89-01)
MIA-5-1(U)
MIA-5-2(U)
MIA-5-3(U)
MIA-5-8(U)
MIA-5-5(L)
MIA-5-6(L)
MIA-5-7(L)
MIA-5-9(L)
1
2
3
4
1
2
3
4
1.4225
1.4225
1.4225
1.4225
1.4225
1.4225
1.4225
1.4225
0.793
0.710
0.760
0.980
0.793
0.710
0.760
0.980
.0422
.0422
.0422
.0422
.0422
.0422
.0422
.0422
MITSUBISHI 4 cyl SOHC 55.8ci/2.6L/2555cc
1 G52B, 4G52, G54B 2.3L/2346cc
4D55, 4D55T Diesel & Turbo Diesel
2.4L/2384cc 4G53, Aux Set (70-91)
MIG-2-1
MIG-2-2
1,2
3
1.8126
1.0240
0.785
0.703
.0587
.0589
MITSUBISHI Same as MIG-2 only w/ bal shaft
elim
MIG-1-EL
MIG-2-EL
1.8126
0.6330
0.930
0.875
NA
NA
MITSUBISHI (Same as MIG-2 appl information)
(balance shaft)
MIG-2-1R
1
1.9855
0.788
.1450
std
2.0L/1997cc G63B Eng. 2.3L/2346cc 4D55 Eng,
2.4L/2351cc G64B Eng. (Mitsubishi Bal. Shaft)
MIG-3-1
MIG-3-2
1
2,3
1.7721
1.7328
0.745
0.825
.0590
.0592
MZ-1^
MAZDA 4cyl 2.0L/1985cc VA Eng. (71-79)
MZ-1-1
MZ-1-2
MZ-1-3
1
2
3
2.0874
2.0480
1.8905
0.984
1.102
0.984
.0593
.0593
.0593
MAZDA 4 cyl OHC, 1.6 B6, 1.8 BP (86-ON)
MZA-1-1
MZA-1-2
MZA-1-3
1
2
3
1.7931
1.7931
1.7931
0.730
0.730
0.730
.0403
.0403
.0403
MAZDA 4 cyl OHC, 2.0 FE, 2.2L (83-ON)
MZA-2-3(U)
MZA-2-1(U)
MZA-2-2(L)
1,5
2,3,4
1,2,3,4,5
1.3439
1.3439
1.3439
0.830
0.700
0.830
.0422
.0422
.0422
MAZDA 4 cyl SOHC 12 valve G6, G60 Series,
B2600, B2600i Mazda Eng. MPV, Mazda Truck,
MPV Van (89-96)
MZA-4-1(U)
VHA-1-2(L)
1,2,3,4,5
1,2,3,4,5
1.2655
1.2655
0.700
0.700
.0422
.0422
SOHC Mazda 12 valve G6, G60 Series Eng.
(Mazda Balance Shaft Set)
MZG-3-1, 2ea
MZG-3-2, 2ea
MZG-3-3, 2ea
Front
Middle
Rear
1.8114
1.7326
0.9453
0.910
1.030
0.635
.0781
.0780
.0585
std
MI-1^
std
MI-2^
std
MI-3^
std
MIA-1*
.010
.020
MIA-2*
.020
(heavy wall)
MIA-3
std
MIA-5*
std
MIG-2**
.020
MIG-2E**
std
MIG-2-1R**
.173 o’size OD
MIG-3**
std
MZA-1
.020
MZA-2*
.020
MZA-4*
std
MZG-3**
std
72
SET NO.
HOUSING
BORE
LENGTH
MAX.
WALL
AMERICAN MOTORS/NASH 4cyl 172, 184,
195.6, 196 Engs. (49-65)
N-6-1
N-5-2
N-5-3
N-5-4
1
2
3
4
1.9470
1.9370
1.9270
1.9170
0.940
0.780
0.780
0.810
.0647
.0647
.0647
.0647
AMC/CHRYSLER JEEP 4 cyl, 150 (83-96)
6cyl 199, 232, 242, 258 (64-96)
2.5L/2460cc Premier (88-89)
N-7-1
N-7-2
N-7-3
N-7-4
1
2
3
4
1.1560
2.1460
2.1360
2.1260
0.690
0.690
0.690
0.690
.0620
.0620
.0620
.0620
(See N-7 listing)
O.D. groove in the 2nd and 3rd bearing positions
N-7-1
N-7-2B
N-7-3B
N-7-4
1
2
3
4
1.1560
2.1460
2.1360
2.1260
0.690
0.690
0.690
0.690
.0620
.0620
.0620
.0620
AMC, AMC/CHRYSLER/ JEEP V-8 cyl, 290,
304, 343, 360, 390, 401 (66-96)
N-9-1
N-8-2
N-8-3
N-8-4
N-8-5
1
2
3
4
5
2.2460
2.2160
2.1860
2.1560
2.1260
0.920
0.625
0.625
0.625
0.625
.0620
.0620
.0620
.0620
.0620
std
NISSAN 4cyl 3.3L/3298cc ED33, ED33T, FD
Diesel & Turbo Diesel (78-90) 3.5L/3465cc
FD35, FD35T Diesel & Turbo Diesel (86-90)
NI-1-1
NI-1-2
NI-1-3
1
2
3
2.3780
2.3701
2.3622
1.102
1.024
1.024
.0596
.0596
.0596
NI-2^
NISSAN 6cyl 4.0L/3956cc P, PF, PF40 (60-90)
NI-2-1
NI-2-2
NI-2-3
NI-2-4
1
2
3
4
2.0660
2.0580
2.0460
2.0340
1.156
0.750
0.750
1.250
.0648
.0648
.0648
.0648
NISSAN SENTRA 4 cyl OHC 1.6L GA 161
(89-90)
NIA-1-1
1,2,3,4,5
1.7340
0.805
.0403
NISSAN 6 cyl OHC, 3.0L VG 30 left bank
(84-86)
NIA-2-1
1,2,3,4
1.9309
0.735
.0403
NISSAN 6 cyl OHC, 3.0L VG 30 right bank
(84-86)
NIA-2-1
1,2,3,4,5
1.9309
0.735
.0403
NISSAN 6 cyl OHC, 3.0L VG 30 E left bank
(87-ON)
NIA-2-1
NIA-3-2
1,2,3
4
1.9309
1.7538
0.735
0.735
.0403
.0403
NISSAN 6 cyl OHC, 3.0L VG 30 E right bank
(87-ON)
NIA-3-1
NIA-2-1
NIA-3-2
1
2,3,4
5
1.9702
1.9309
1.7538
1.235
0.735
0.735
.0403
.0403
.0403
NISSAN SENTRA 4 cyl OHC, 1.5L E 15
SENTRA 1.6L E16 (82-86)
NIA-1-1
NIA-1-2
NIA-1-3
1,2,4
3
5
1.7340
1.7340
1.7340
0.805
0.805
1.120
.0403
.0403
.0403
NISSAN 4 cyl OHC, 1.8L CA 18E & 2.0L CA20
(82-90)
NIA-4-1
NIA-4-2
1,2,3,5
4
1.8914
1.8914
0.805
0.805
.0403
.0403
NISSAN 4 cyl OHC, 2.0L Z20 Eng. 2.2L
Z22 Eng. 2.4L Z-24 Eng. (80-89)
TOA-1-1(U)
TOA-1-2(L)
1,2,3,4,5
1,2,3,4,5
1.3841
1.3841
0.800
0.800
.0422
.0422
GM V-8 324 (54-56)
OLDS V-8 cyl, 371, 394 (59-64)
O-5-1
1,2,3,4,5
2.1288
0.688
.0641
GM, BUICK, CAD, OLDS, PONT 6-V-8 cyl,
250, 260, 330, 350, 400, 403, 425, 455
(64-77)
O-6-1
O-6-2
O-6-3
O-6-4
O-6-5
1
2
3
4
5
2.1688
2.1488
2.1288
2.1088
2.0888
0.688
0.688
0.688
0.688
0.688
.0646
.0646
.0646
.0646
.0646
GM, BUICK, CHEV, OLDS, PONT, CAD V-8
260, 260 Diesel, 307, 350B, 350R, N,
350.8 CADILLAC Diesel, 403 (77-90)
O-7-1
O-6-2
O-6-3
O-6-4
O-6-5
1
2
3
4
5
2.1688
2.1488
2.1288
2.1088
2.0888
0.688
0.688
0.688
0.688
0.688
.0646
.0646
.0646
.0646
.0646
N-6
N-7
.010
.020
.030
.040
N-7B
std
N-9
.010
.020
.030
NI-1^
std
NIA-1
std
NIA-2L
std
NIA-2R
std
NIA-3L
std
NIA-3R
std
NIA-4
.020
NIA-5
std
NIA-6*
.020
O-5
std
O-6
.010
O-7
std
73
73
SET CONTENTS
POSITION
CAM BEARING
CONTENTS
std
SET CONTENTS
CAM BEARING
SET NO.
O-8
CONTENTS
POSITION
HOUSING
BORE
LENGTH
MAX.
WALL
std
GM, BUICK, CHEV, OLDS, PONT V-6
260 Diesel 4.3L (82-85)
O-7-1
O-6-2
O-6-3
O-6-4
1
2
3
4
2.1688
2.1488
2.1288
2.1088
0.688
0.688
0.688
0.688
.0646
.0646
.0646
.0646
ON-1^
ONAN 2cyl 50ci/820cc CCK Series, MSV-106F
ON-1-1
1,2
1.5000
0.697
.0619
OPEL KADETT 4 cyl 1.5/1492cc Eng.
(w/ Triangle on left side of head
4 cyl 1698, 1897cc, 1900 GT, KADETT,
MANTA (w/ Triangle on left side of head) (65-71)
OP-3-1
OP-3-2
OP-3-3
1
2
3
2.1069
2.0970
2.0773
0.950
0.723
0.723
.0889
.0889
.0840
OPEL 4 cyl 1492cc, 1584cc, 1698cc, 1897cc
(4 brg set) (68-81)
OP-3-1
OP-3-2
OP-5-3
OP-3-3
1
2
3
4
2.1069
2.0970
2.0872
2.07735
0.950
0.723
0.723
0.723
.0889
.0889
.0865
.0840
.010
GMC Truck, PONT L4 195, V-8 287, 288, 316,
317, 326, 347, 370 & 389 (55-62)
P-3-1
P-3-2
1
2,3,4,5
2.0307
2.0307
1.060
0.680
.0644
.0644
PP-3
GM HP version (see P-3 listing)
PP-3-1
PP-3-2
1
2,3,4,5
2.0307
2.0307
1.060
0.680
.0644
.0644
GM, BUICK, PONT L4, L6, V-6, V-8 195,
265ci/4.3L, 301, 326, 350, 389, 400, 421, 428,
455 (63-81) OLDS 301 (1979)
P-3-2
1,2,3,4,5
2.0307
0.680
.0644
.010
.020
PP-4
GM HP version (see P-4 listing)
PP-3-2
1,2,3,4,5
2.0307
0.680
.0644
CHRYSLER L6 cyl, 201, 218, 228, 230 (32-63)
CHRYSLER IND Ind 5/6/30/31, C-36,
T-50/57/81/96/105/112/116/125/128/214/215
218/30; CH MARINE L6 ACE M461S;
CH/DOD L6 218, 230, 237, 250 & 265 (41-60)
PD-1-1
PD-1-2
PD-1-3
1
2
3
2.1295
2.0990
2.0675
1.093
0.875
0.875
.0645
.0649
.0650
CHRYSLER L6 cyl, 218, 228, 236.6, 237,
241, 250, 251& 265 (34-68)
PD-1-1
PD-3-2
PD-3-3
1
2
3
2.1295
2.0990
2.0675
1.093
1.062
1.062
.0645
.0650
.0650
CHRYSLER V-8 301, 331, 354, 392, HEMI
(51-59) Indust Eng. IND 20/20A/24/24A 56
Marine V-8
PD-8-1
PD-8-2
PD-8-3
1
2,3,4
5
2.1300
2.1300
1.5675
0.938
0.813
0.875
.0647
.0647
.0647
CHRYSLER V-8 cyl, 273, 277, 301, 303, 313,
318, 326, 340, 360 (56-80)
PD-16-1
PD-9-2
PD-9-3
PD-9-4
PD-9-5
1
2
3
4
5
2.1300
2.1140
2.0990
2.0830
1.6925
0.875
0.760
0.760
0.760
0.940
.0645
.0645
.0645
.0645
.0645
CHRYSLER HP version (see PD-16 listing)
PDP-16-1
PDP-9-2
PDP-9-3
PDP-9-4
PDP-9-5
1
2
3
4
5
2.1300
2.1140
2.0990
2.0830
1.6925
0.875
0.760
0.760
0.760
0.940
.0645
.0645
.0645
.0645
.0645
CHRYSLER V-8 cyl, 350, 361, 383, 400, 413,
426, 440 & HEMI (57-80)
PD-17-1
PD-12-2
PD-12-3
PD-12-4
PD-12-5
1
2
3
4
5
2.1300
2.1140
2.0990
2.0830
1.8800
0.750
0.750
0.669
0.750
0.750
.0645
.0645
.0645
.0645
.0645
PDP-17-1
PDP-12-2
PDP-12-3
PDP-12-4
PDP-12-5
1
2
3
4
5
2.1300
2.1140
2.0990
2.0830
1.8800
0.750
0.750
0.669
0.750
0.750
.0645
.0645
.0645
.0645
.0645
std
OP-3
std
OP-5
std
P-3
PP-3T (Coated)
P-4
PP-4T (Coated)
PD-1
.010
.020
PD-3
.010
.020
.030
PD-8
.010
PD-16
.010
.020
.030
PDP-16
PDP-16T(Coated)
PD-17
.010
.020
.030
PDP-17
PDP-17T(Coated)
74
SET NO.
HOUSING
BORE
LENGTH
MAX.
WALL
CHRYSLER L6 cyl, 170, 198, 225 (60-78)
PD-18-1
PD-12-2
PD-13-3
PD-13-4
1
2
3
4
2.1300
2.1140
2.0990
2.0830
0.920
0.750
0.750
0.750
.0645
.0645
.0645
.0645
CHRYSLER L6 cyl, 225 (79-87)
PD-21-1
PD-21-2
PD-21-3
PD-13-4
1
2
3
4
2.1300
2.1140
2.0990
2.0830
0.780
0.625
0.625
0.750
.0640
.0640
.0640
.0645
CHRYSLER/JEEP V-8 cyl, 273, 277, 301,
303, 313, 318, 326, 340, 360 (57-96)
PD-16-1
PD-25-2
PD-25-3
PD-25-4
PD-9-5
1
2
3
4
5
2.1300
2.1140
2.0990
2.0830
1.6925
0.875
0.625
0.615
0.615
0.940
.0645
.0645
.0645
.0645
.0645
PDP-16-1
PDP-25-2
PDP-25-3
PDP-25-4
PDP-9-5
1
2
3
4
5
2.1300
2.1140
2.0990
2.0830
1.6925
0.875
0.625
0.615
0.615
0.940
.0645
.0645
.0645
.0645
.0645
CHRYSLER DODGE Truck 6 cyl 238.5ci/3.9L
(87-93)
PD-16-1
PD-25-2
PD-25-4
PD-9-5
1
2
3
4
2.1300
2.1140
2.0830
1.6925
0.875
0.625
0.615
0.940
.0645
.0645
.0645
.0645
CHRYSLER V-6 cyl, 201ci/3.3L, 230ci/3.8L
(90-96)
PD-28-1
PD-28-2
PD-28-3
PD-28-4
1
2
3
4
2.1300
2.1140
2.0990
2.0830
0.930
0.610
0.610
0.610
.0647
.0653
.0653
.0647
(See PD-28 listing)
O.D. groove in the 2nd and 3rd bearing positions
PD-28-1
PD-28-2B
PD-28-3B
PD-28-4
1
2
3
4
2.1300
2.1140
2.0990
2.0830
0.930
0.610
0.610
0.610
.0647
.0653
.0653
.0647
OHV CHRYSLER V-10 8.0L/488ci Model E (9299), Model W 250-350 Series Truck (94-99)
PD-30-1
PD-30-2
1
2
2.2235
2.2075
0.885
0.625
.0650
.0652
PD-30-3
3
2.1915
0.625
.0650
PD-30-4
4
2.1755
0.625
.0650
PD-30-5
PD-30-6
5
6
2.1595
2.0495
0.625
0.885
.0650
.0650
CHRYSLER 4 cyl OHC, 2.2L & 2.5L
(Cam set) (87-93)
PDA-1-2(U)
PDA-1-1(L)
1,2,3,4,5
1,2,3,4,5
1.4819
1.4819
0.625
0.625
.0522
.0522
std
CHRYSLER 4 cyl OHC, .020 o'size Cam journal
(86-ON)
PDA-2-2(U)
PDA-2-1(L)
1,2,3,4,5
1,2,3,4,5
1.4819
1.4819
0.625
0.625
.0422
.0422
PDA-3
DODGE NEON (SOHC) 2.0L 16 valve
PDA-3-1
PDA-3-2
PDA-3-3
PDA-3-4
PDA-3-5
1
2
3
4
5
1.0735
1.7195
1.7345
1.7505
1.7665
0.815
0.775
0.775
0.775
0.745
.0404
.0406
.0402
.0404
.0404
Chrysler, Mitsubishi L4 cyl 2.2L, 2.5L
SOHC Turbo (81-92)
PDG-26-1
PDG-26-2
1
2
1.8110
.9055
0.745
0.825
.0640
.0640
CHRYSLER 4 cyl,153 (Semi-finished bal
shaft set) and OHC 153 (Bal set) (86-ON)
PDG-29-1
Both
1.7866
0.865
.08 Semi
semi
R-1
REO Truck, 6 cyl OA & OH Series
R-1-1
R-1-2
R-1-3
R-1-4
1
2
3
4
2.5620
2.4370
2.3120
1.7500
1.625
1.250
1.250
1.187
.0610
.0610
.0610
.0613
RENAULT 1.7L/1721cc, 2.0L/1965cc (85-87)
RN-1-1
RN-1-2
1
2
1.7131
1.6737
0.758
0.492
.0610
.0595
.010
.020
.030
PD-21
.010
.020
PD-25
.010
.020
PDP-25
PDP-25T(Coated)
PD-27
.010
PD-28
.010
PD-28B
std
PD-30
std
PDA-1*
std
PDA-2*
std
PDG-26**
std
PDG-29S**
std
RN-1^
std
75
75
SET CONTENTS
POSITION
CAM BEARING
CONTENTS
PD-18
SET CONTENTS
CAM BEARING
SET NO.
SA-1
TO-2
TO-3
std
TO-7
std
TO-8
std
TO-10
std
TO-11
std
TO-12
std
TO-13^
std
TO-14^
std
MAX.
WALL
POSITION
SUZUKI 1.3L
SA-1-1
SA-1-2
SA-1-3
SA-1-4
SA-1-5
1
2
3
4
5
1.8215
1.8295
1.8375
1.8455
1.8535
0.940
0.485
0.485
0.485
0.485
.0407
.0407
.0407
.0407
.0407
TOYOTA 4cyl 1.5L/1490cc 2R Series (64-71)
1.6L/1587cc 4R, 9R, 12J Series (65-85)
TO-2-1
TO-2-2
TO-2-3
1
2
3
1.9685
1.9685
1.9685
1.095
1.654
0.985
.0685
.0735
.0785
TOYOTA 4cyl 933cc, 1077cc, 1166cc, 1290cc,
1468cc K, KC, 2K, 3K, 3KC, 4K, 4KC, 4KE,
5K Series (66-88)
TO-3-1
TO-3-2
TO-3-3
TO-3-4
1
2
3
4
1.8895
1.8705
1.8510
1.8311
0.715
0.715
0.715
0.715
.0929
.0885
.0835
.0786
TOYOTA 4 cyl 1407cc T Series. 1588cc 2T,
2T-B, 2T-C, 2T-J, 2T-U, 2T-G, 2T-GEU, 12T
Series. 1770cc 3T, 3T-C, 3T-U, 3T-EU, 3T-G,
13T Series. CARINA, COROLLA (70-82)
TO-7-1
TO-7-2
TO-7-3
TO-7-4
TO-7-5
1
2
3
4
5
1.9691
1.9593
1.9297
1.9400
1.9494
0.705
0.625
0.705
0.625
0.705
.0687
.0687
.0588
.0687
.0785
TOYOTA 4 cyl, 1858, 1968cc (69-74)
6 cyl, 2253, 2563, 2759cc (68-76)
TO-8-1
TO-8-2
1
2,3,4
1.4971
1.4971
1.103
0.793
.0591
.0591
TOYOTA 6 cyl, 3878 LAND CRUISER F Eng.
(69-90) 3955cc 3F/3FE; (10/84-92)
4.2L/4230cc 2F (77-85)
TO-1-1
TO-1-2
TO-10-3
TO-1-4
1
2
3
4
2.0475
1.9885
1.9295
1.8705
1.143
0.943
0.943
0.984
.0785
.0785
.0785
.0785
TOYOTA 4 cyl, 3RC 1897cc CORONA,
CROWN, PICK-UP 4cyl 1994cc
5R Eng. Forklift (65-86)
TO-5-1
TO-5-2
TO-11-3
TO-5-4
TO-5-5
1
2
3
4
5
1.9688
1.9688
1.9688
1.9688
1.9688
1.142
0.790
1.810
0.750
1.105
.0686
.0735
.0785
.0835
.0884
TOYOTA 4cyl 1.6L/1626cc 1Y Series.
1.8L/1812cc 2Y Series. 2.0L/1998cc 3Y,
3YEC. 2.2L/2237cc 4Y, 4YEC (83-90)
TO-12-1
TO-12-2
TO-12-3
TO-12-4
TO-12-5
1
2
3
4
5
1.9697
1.9598
1.9303
1.9402
1.9500
0.709
0.630
0.709
0.630
0.709
.0689
.0689
.0591
.0689
.0788
TOYOTA 4cyl 2.2L/2188cc L Series Diesel (7888) 2.4L/2446cc 2L, 2LT Diesel & Turbo Diesel
(81-88)
TO-13-1
TO-13-2
1
2,3
1.4977
1.4977
1.103
0.787
.0594
.0594
TOYOTA 4cyl 3.0L/2977cc B, 11B Diesel (72-84)
3.2L/3168cc 2B Diesel (77-82) 3.4L/3431cc 3B
Diesel (80-6/84)
TO-14-1
TO-14-2
TO-14-3
1
2
3
2.0102
2.0102
2.0102
0.933
0.780
0.933
.0754
.0793
.0833
std
std
HOUSING
BORE
LENGTH
CONTENTS
TO-15^
TOYOTA 4cyl 3.0L/2977cc B, 11B Diesel (84-
TO-15-1
1
2.2638
0.787
.0791
std
5/88) 3.4L/3431cc 3B, 13B Diesel, 13BT Turbo
Diesel (7/84-90) 3.7L/3660cc 14B Diesel (88)
TO-15-2
TO-15-3
TO-15-4
TO-15-5
2
3
4
5
2.2539
2.2047
2.2047
2.2146
0.787
0.787
0.787
0.787
.0791
.0594
.0644
.0742
TOA-1*
TOYOTA 4 cyl OHC, 2.2L 20R, 2.4L 22R
(74-on)
TOA-2-2(U)
TOA-2-1(L)
1,2,3
1,2,3
1.3841
1.3841
0.800
0.800
.0418
.0418
TOYOTA L4 2.0L/1958cc (69-74) CELICA, CORONA,
CORONA MkII, PICK-UP 4 cyl 1858cc (8RC),
2.0L/1968cc (18RC) (Aux/Balance shaft set)
TOG-8-1
TOG-8-2
1
2
1.9682
1.7714
0.975
0.785
.0784
.0784
TOYOTA 6 cyl 2.3L/2253cc 2M Eng.
(Aux shaft set), 2.6L/2563cc 4M & 4ME
eng (Aux shaft set), 2.8L/2759cc 5 ME Eng.
(Aux shaft set) (66-ON)
TOG-9-1
TOG-9-2
1
2
1.7719
1.4569
0.640
0.640
.0788
.0788
2.7L/2693cc DOHC Toyota 3RZFE Eng. Toyota
Truck: T100, 1/2 Ton P.U. (Aux/Balance shaft set)
TOG-10-1, 2 ea
TOG-10-2, 2 ea
Front
Rear
1.6541
1.6350
0.800
0.895
.0783
.0790
std
TOG-8**
std
TOG-9**
std
TOG-10^
std
76
SET NO.
HOUSING
BORE
LENGTH
MAX.
WALL
VOLVO 4 cyl 1783cc 122S, 140, P1800,
PV544, PV545 4 cyl B 18B 1986cc 140, 240,
P1800, P1800E, P1800ES, 4 cyl B20B, B20E,
1990cc (59-78) L4 2127cc B21E, B21ET Turbo
(61-85) 2316cc SOHC B23E, B23F, B23FT
Turbo, B230F, B230FT Turbo. 2316cc DOHC
B234F (81-96)
VO-2-1
VO-2-2
VO-2-3
1
2
3
1.9655
1.8081
1.5724
1.060
1.025
1.100
.0570
.0570
.0573
VOLVO 6 cyl B-30 A, E, F 2979cc 160 Series
(68-75)
VO-2-1
1,2,3,4
1.9655
1.060
.0570
std
VOA-1*
VOLVO 6 cyl OHC 2.1L, 2.3L (83-91)
VHA-1-2(U)
VOA-1-1(L)
1,2,3,4,5
1,2,3,4,5
1.2655
1.2655
0.700
0.700
.0422
.0422
VW Air Cooled Engs, 1.2L/1192cc, 1.3L/1297cc,
1.5L/1493cc, 1.6L/1584cc, Type I, II, III vehicles,
VW-1-1
VW-1-2
1
2
1.0831
1.0831
0.787
0.906
.0490
.0490
Karmann Ghia, Type 181 The Thing, VW Truck
VW-1-3(U)
VW-1-3(L)
3
3
1.0831
1.0831
1.102
0.984
.0490
.0490
AUDI 5 cyl OHC 2.0L, 2.1L, 2.2L, 2.3L (78-ON)
VWA-1-1(U)
VWA-1-2(U)
VWA-1-4(U)
MZA-2-3(L)
VWA-1-5(L)
VWA-1-3(L)
1
2,3
4
1
2,3
4
1.3439
1.2655
1.2655
1.3439
1.2655
1.2655
0.830
0.830
0.630
0.830
0.700
0.630
.0422
.0422
.0422
.0422
.0422
.0422
VOLKSWAGEN 4 cyl OHC 1.8L SOHC (83-91)
VWA-2-2(U)
VWA-2-1(L)
1,2,3,4,5
1,2,3,4,5
1.1085
1.1085
0.680
0.680
.0422
.0422
VOLKSWAGEN 4 cyl SOHC 1297cc, 1457cc,
1471cc, 1588cc, 1716cc, 1780cc (74-94)
AUDI 1299cc, 1471cc, 1588cc Diesel & Turbo
Diesel, 1715cc (72-84) (Aux set)
VWG-1-1
VWG-1-2
1
2
1.8115
1.7721
0.585
0.585
.0590
.0590
WAUKESHA, WAUK L4 FC, FCL, FCX, FK,
FKJ, FL & FLJ, CASE, IH
WA-3-1
WA-3-2
WA-3-3
1
2
3
2.2540
2.0040
1.6290
1.125
1.312
1.500
.0643
.0645
.0645
WAUKESHA, OLIVER 4 - 6 cyl, Gas & Diesel
121ci-160 Series, 125ci-180GB, 139ci-180GM,
176ci-176 Series, 186ci-185 Series, 209ci-209
Series
WA-1-1
1
1.8750
1.000
.0617
WAUKESHA L6 cyl VRD 283, VRG 283,
VRD 310, VRG 310 Gas & Diesel
WA-1-1
1,2,3,4
1.8750
1.000
.0617
VO-2
VO-3
std
VW-1^
std
VWA-1*
std
VWA-2*
std
VWG-1**
std
WA-3
std
WA-4
std
WA-7
std
77
77
SET CONTENTS
POSITION
CAM BEARING
CONTENTS
std
SET CONTENTS
CAM BEARING
COMPONENT LISTING
COMPONENT
79
LENGTH
MAX. WALL
2.2040
2.2040
2.2040
2.2040
2.2040
2.2140
2.2140
2.2140
2.2140
2.2140
1.8805
2.0055
2.2595
2.2595
1.8895
1.7750
1.7975
1.7775
2.1920
1.9165
1.8565
1.8265
1.7965
1.8865
1.9165
1.9165
1.9165
1.9365
1.9965
1.9765
1.7960
1.7539
1.5039
1.8918
1.8524
1.8131
1.4587
1.8918
1.8524
1.8131
1.7741
1.7340
1.5772
1.4587
1.9165
1.9165
1.9365
2.1245
0.660
0.660
0.660
0.660
0.660
0.660
0.660
0.660
0.660
0.660
1.125
1.308
1.385
1.000
0.984
0.500
0.500
0.500
0.635
0.750
0.750
0.750
0.750
0.750
0.620
0.750
0.750
0.750
0.745
0.630
1.125
0.755
0.533
0.800
0.800
0.800
1.390
0.800
0.995
0.800
1.115
1.085
0.800
1.000
0.620
0.750
0.750
1.125
.0602
.0677
.0752
.0827
.0902
.0652
.0727
.0802
.0877
.0952
.0642
.0643
.0630
.0630
.0586
.0606
.0714
.0614
.0694
.0643
.0643
.0643
.0643
.0642
.0642
.0642
.0642
.0743
.0741
.0641
.0644
.0644
.0644
.0403
.0403
.0403
.0403
.0500
.0500
.0500
.0403
.0400
.0403
.0398
.0642
.0642
.0743
.0615
CAM BEARING
351HP, 351RHP
351HP
351HP
351HP
351HP
351HP-R1
351HP-R1
351HP-R1
351HP-R1
351HP-R1
A-1
A-2
A-3, A-4, A-5
A-3, A-4, A-5
CHG-14
FG-29
FG-34
FG-34
F-38, FG-51
B-8
B-6, B-8, B-11
B-6, B-8, B-11
B-6, B-8, B-11
B-6, B-8, B-11
B-9, B-12, B-12B, B-13
B-9, B-11, B-12
B-12B
B-13
B-14
B-14
BL-1
BL-1
BL-1
BMA-1, BMA-2, BMA-3
BMA-1, BMA-2, BMA-3
BMA-1, BMA-2, BMA-3
BMA-1
BMA-3
BMA-3
BMA-3
BMA-4
BMA-4
BMA-2, BMA-3
BMA-4
BP-9, BP-13
BP-9
BP-13
BU-2
HOUSING
BORE
COMPONENT LISTING
351HP-1
351HP-2
351HP-3
351HP-4
351HP-5
351HP-1R1
351HP-2R1
351HP-3R1
351HP-4R1
351HP-5R1
A-1-1
A-2-1
A-3-1
A-3-2
AGB-14-1
AGB-29-1
AGB-34-1
AGB-34-2
AGB-51-1
B-4-1
B-4-3
B-4-4
B-4-5
B-6-1
B-9-2
B-11-1
B-11-1B
B-13-1
B-14-1
B-14-2
BL-1-1
BL-1-2
BL-1-3
BMA-1-1
BMA-1-2
BMA-1-3
BMA-1-4
BMA-1-5
BMA-1-6
BMA-1-7
BMA-1-8
BMA-1-9
BMA-1-10
BMA-4-3
BP-9-2
BP-11-1
BP-13-1
BU-1-1
IN SET(S)
COMPONENT LISTING
CAM BEARING
COMPONENT LISTING
COMPONENT
BU-1-2
BU-1-3
C-2-1
C-2-2
C-3-1
C-4-1
C-4-2
C-4-3
C-4-4
C-4-5
C-4-5A
CA-3-1
CA-3-2
CA-3-3
CA-4-1
CA-4-2
CA-6-1
CA-6-2
CA-6-3
CA-9-1
CA-11-1
CAT-1-1
CAT-1-2
CAT-2-1
CAT-2-2
CAT-2-3
CAT-2-4
CAT-2-5
CAT-2-6
CAT-3-1
CAT-3-2
CAT-4-1
CAT-4-2
CH-2-1
CH-2-2
CH-2-3
CH-2-4
CH-3-1
CH-3-2
CH-3-3
CH-3-4
CH-4-1
CH-4-1S
CH-4-2
CH-4-3
CH-4-4
CH-5-1
CH-5-2
IN SET(S)
BU-2
BU-2
C-2
C-2
C-3
C-4, C-4A, CH-21
C-4, C-4A, CH-21
C-4, C-4A, CH-21
C-4, C-4A
C-4
C-4A
CA-3
CA-3
CA-3
CA-4, CA-8, CA-9
CA-4, CA-8, CA-9
CA-6, CA-7
CA-6, CA-7
CA-6, CA-7
CA-9
CA-11
CAT-1
CAT-2
CAT-2-1 Multi-Engine
CAT-1, CAT-2
CH-2
CH-2
CH-2
CH-2
CH-3
CH-3
CH-3
CH-3
CH-4, CH-8, CH-17, CH-21
CH-4A
CH-4, CH-8, CH-17, CH-21
CH-4, CH-8, CH-17, CH-21
CH-4
CH-5
CH-6, CH-7
80
HOUSING
BORE
LENGTH
MAX. WALL
2.1245
1.3745
1.8797
1.5682
1.8797
2.1687
2.1487
2.1287
2.1087
2.0887
2.0887
1.8805
1.8805
1.8805
1.8805
1.8805
2.3745
2.3745
2.3745
1.8805
2.5197
2.6525
2.6525
2.5630
2.5630
2.2776
2.2776
2.1880
2.1880
2.8745
2.8745
3.0250
3.0250
2.1599
2.0975
2.0350
1.9725
2.2850
2.2225
2.1600
2.0975
2.0200
2.0300
2.0100
2.0000
2.0100
2.0200
2.0100
0.875
1.000
0.750
0.875
0.620
0.591
0.591
0.591
0.591
0.591
0.685
1.312
0.718
1.187
1.218
0.495
1.656
1.437
1.156
0.970
0.994
1.890
0.750
1.130
1.009
1.190
2.005
1.190
2.010
1.190
2.000
1.010
1.310
1.125
0.937
0.937
0.937
1.125
0.937
0.937
0.937
0.740
0.740
0.740
0.740
0.940
0.860
0.860
.0615
.0615
.0641
.0642
.0637
.0652
.0652
.0652
.0652
.0652
.0652
.0642
.0642
.0642
.0643
.0642
.0625
.0625
.0625
.0640
.0773
.0750
.0750
.1243
.1243
.0946
.0946
.1052
.1051
.1258
.1258
.1360
.1360
.0644
.0644
.0644
.0644
.0641
.0641
.0641
.0642
.0744
.0795
.0694
.0644
.0694
.0744
.0694
COMPONENT LISTING
COMPONENT
81
LENGTH
MAX. WALL
2.0000
2.0100
2.1300
2.3270
2.3171
2.3073
2.1400
2.1300
2.1200
2.4125
2.4125
2.0100
1.9995
1.9995
2.0095
2.0199
2.0000
1.8740
2.0100
2.0200
2.0100
2.0000
2.0100
2.0300
2.0400
2.0500
2.0600
2.1400
2.1300
2.1200
2.1500
2.1600
2.1500
2.1600
2.3743
2.3120
2.2495
1.9370
1.9375
1.8750
1.8125
2.1290
2.1250
2.6870
2.6870
2.6870
2.1870
2.1870
0.860
0.940
0.980
0.630
0.630
0.630
0.860
0.980
0.980
0.680
0.680
0.625
0.630
0.720
0.625
0.625
0.710
0.835
1.172
0.740
0.740
0.740
0.940
0.740
0.740
0.740
0.740
0.860
0.980
0.980
0.860
0.860
0.980
0.980
1.094
1.000
1.000
1.250
1.323
0.573
1.135
2.250
1.685
1.685
1.685
2.185
1.905
0.905
.0644
.0694
.0894
.0790
.0740
.0692
.0941
.0891
.0841
.0643
.0643
.0691
.0640
.0640
.0691
.0741
.0644
.1860
.0691
.0744
.0694
.0644
.0694
.0744
.0844
.0894
.0944
.0941
.0891
.0841
.0991
.1041
.0991
.1041
.0940
.0940
.0940
.0940
.0626
.0626
.0626
.0644
.0644
.0939
.0939
.0939
.0932
.0932
CAM BEARING
CH-6, CH-7
CH-5
CH-9A
CH-10
CH-10
CH-10
CH-9A, CH-12
CH-9A, CH-12
CH-9A, CH-12
CH-13
CH-13
CH-18, CH-18A
CH-18, CH-19, CHG-22
CH-18A
CH-18, CH18A, CH-19, CHG-22
CH-19
CH-20
CHG-15
CHG-22
CHP-4, CHP-8, CHP-17
CHP-4, CHP-8, CHP-17
CHP-4, CHP-8, CHP-17, GMP-8
CHP-4
CHP-8R1
CHP-8R2
CHP-8R3
CHP-8R4
CHP-12
CHP-12
CHP-12, GMP-12
CHP-12R1
CHP-12R2
CHP-12R1
CHP-12R2
CO-7
CO-7
CO-7
CO-7
CO-9
CO-9
CO-9
CU-5A, CU-10
CU-5A, CU-10
CU-9
CU-9
CU-9
CU-11, CU-11A
CU-11, CU-11A
HOUSING
BORE
COMPONENT LISTING
CH-5-3
CH-5-4
CH-9-4
CH-10-1
CH-10-2
CH-10-3
CH-12-1
CH-12-2
CH-12-3
CH-13-1
CH-13-2
CH-18-1A
CH-18-2
CH-18-2A
CH-18-4
CH-19-1
CH-20-1
CHG-15-1
CHG-22-1
CHP-4-1
CHP-4-2
CHP-4-3
CHP-4-4
CHP-4-11
CHP-4-12
CHP-4-13
CHP-4-14
CHP-12-1
CHP-12-2
CHP-12-3
CHP-12-11
CHP-12-12
CHP-12-21
CHP-12-22
CO-7-1
CO-7-2
CO-7-3
CO-7-4
CO-9-1
CO-9-2
CO-9-3
CU-1-1
CU-5-2A
CU-8-1
CU-9-1
CU-9-2
CU-11-1
CU-11-2
IN SET(S)
COMPONENT LISTING
CAM BEARING
COMPONENT LISTING
COMPONENT
CU-12-1
CU-13-1
CU-13-2
CU-14-1
DA-1-1
DA-1-2
DA-1-3
DA-1-4
DA-1-5
DA-2-1
DA-2-2
DA-2-3
DA-3-1
DA-3-2
DA-3-3A
DB-1-1
DB-1-2
DB-1-3
DB-1-4
DE-1-1
DE-2-1
DE-2-1R1
DE-2-2
DE-2-2R1
DE-2-3
DE-4-1
DE-6-1S
DE-6-2
DI-1-1
DI-1-2
DI-1-3
DI-2-1
DI-2-2
DI-2-3
F-1-1
F-1-2
F-7-2
F-8-1
F-9-1
F-9-2B
F-9-3
F-11-2
F-12-1
F-14-5
F-15-2
F-15-3
F-15-4
F-15-5
IN SET(S)
CU-12
CU-13
CU-13
CU-14
DA-1
DA-1
DA-1
DA-1
DA-1
DA-2
DA-2
DA-2
DA-3A, DA-5
DA-3A, DA-5
DA-3A, DA-5
DB-1
DB-1
DB-1
DB-1
DE-1
DE-2, DE-5, DE-7
DE-5R1
DE-2, DE-5, DE-7
DE-5R1
DE-7
DE-4
Detroit Mult-Eng.
Detroit Mult-Eng.
DI-1
DI-1
DI-1
DI-2
DI-2
DI-2
F-1
F-1
F-7
F-11, F-12
F-9A, F-9B
F-9B
F-9A
F-11, F-12
F-12
F-19
F-33
F-33
F-33
F-33
82
HOUSING
BORE
LENGTH
MAX. WALL
2.2535
2.6870
2.6870
2.6245
1.8509
1.8312
1.8115
1.7918
1.7495
1.9155
1.8555
1.7495
1.9155
1.8555
1.7495
2.3630
2.3630
2.3630
2.3630
2.2505
2.3755
2.3855
2.3655
2.3700
2.3555
2.7216
1.6855
2.1880
1.5760
1.5760
1.5760
1.9695
1.9695
1.9695
1.9280
1.9280
2.0580
2.2500
2.0580
2.0580
2.0580
2.2500
2.6000
2.3880
2.2950
2.2800
2.2650
2.2500
1.005
1.810
1.070
1.690
0.930
0.555
0.555
0.555
0.555
1.455
1.070
0.812
0.945
0.865
0.947
1.027
1.027
1.027
1.027
1.550
1.510
1.505
1.510
1.505
1.510
0.710
1.072
1.323
0.787
0.787
0.787
0.782
0.782
0.782
1.600
1.312
0.875
0.875
0.875
0.620
0.620
0.755
0.755
0.710
0.620
0.620
0.620
0.560
.0620
.0937
.0937
.0621
.0625
.0625
.0625
.0625
.0625
.0624
.0624
.0624
.0625
.0625
.0625
.0789
.0838
.0887
.0936
.0925
.0942
.9930
.0892
.0943
.0842
.0774
.1020
.3430
.0596
.0695
.0793
.0596
.0695
.0793
.0648
.0648
.0649
.0618
.0648
.0648
.0648
.0618
.0617
.0610
.0841
.0766
.0691
.0616
COMPONENT LISTING
COMPONENT
83
LENGTH
MAX. WALL
2.6025
2.4985
1.9635
1.9485
1.9335
2.2040
2.1890
2.1740
2.1590
2.1440
2.4480
2.4330
2.4180
2.4030
2.0580
2.1445
2.1445
2.2950
2.2800
2.2650
2.2500
2.2500
1.6890
1.6890
1.6890
1.7755
1.8785
1.8935
2.2500
1.7734
1.7585
1.7435
1.7285
1.9785
2.3100
1.9011
1.9011
1.9203
1.9299
1.9299
1.7585
2.5345
2.1920
2.1770
2.2047
2.1890
2.2047
1.8521
0.670
0.670
0.720
0.720
0.720
0.660
0.660
0.660
0.660
0.660
0.710
0.710
0.710
0.710
0.875
0.860
0.860
0.620
0.620
0.620
0.560
0.660
0.790
0.685
0.790
0.785
0.665
0.625
0.580
0.775
0.700
0.700
0.595
0.720
0.620
0.693
0.693
0.693
0.949
0.714
0.775
0.765
0.635
0.555
0.723
0.723
0.503
0.780
.0629
.0629
.0757
.0682
.0607
.0602
.0602
.0602
.0602
.0602
.0609
.0609
.0609
.0609
.0649
.0624
.0624
.0844
.0769
.0694
.0619
.0616
.0633
.0633
.0633
.0600
.0600
.0600
.0620
.0604
.0604
.0604
.0604
.0832
.0912
.0638
.0638
.0738
.0794
.0794
.0604
.0708
.0694
.0619
.0973
.0894
.0973
.0605
CAM BEARING
F-16
F-16
F-32
F-32
F-32
F-18
F-18, F-26
F-18, F-26
F-18, F-26
F-18, F-26
F-19
F-19
F-19
F-19
F-7, F-22
F-23A
F-23B, F-49B
F-24
F-24
F-24
F-24
F-26
F-28
F-28
F-28
F-29
F-29
F-29
F-30
F-31
F-31
F-31, F-42
F-31, F42
F-32
F-24, F-33
F-34
F-34B
F-34-S
F-41
F-41
F-42
F-43, F-44
F-45
F-45
F-46
F-46
F-46
F-47, F-47B
HOUSING
BORE
COMPONENT LISTING
F-16-1
F-16-2
F-17-2
F-17-3
F-17-4
F-18-1
F-18-2
F-18-3
F-18-4
F-18-5
F-19-1
F-19-2
F-19-3
F-19-4
F-22-1
F-23-1A
F-23-1B
F-24-2
F-24-3
F-24-4
F-24-5
F-26-1
F-28-1
F-28-2
F-28-3
F-29-1
F-29-2
F-29-3A
F-30-1
F-31-1
F-31-2
F-31-3
F-31-4
F-32-1
F-33-1
F-34-1
F-34-1B
F-34-1S
F-41-1
F-41-2
F-42-1
F-43-1
F-45-1
F-45-2
F-46-1
F-46-2
F-46-3
F-47-1
IN SET(S)
COMPONENT LISTING
CAM BEARING
COMPONENT LISTING
COMPONENT
F-47-2
F-47-2B
F-47-3
F-47-3B
F-47-4
F-48-1
F-48-2
F-48-4
F-48-4A
F-49-1
F-49-1B
F-49-2
F-50-1
F-50-2
F-50-3
F-50-4
F-50-4A
F-51-2
F-52-1
F-53-1
F-53-2
FA-1-1
FA-1-2
FA-1-3
FA-1-4
FA-1-5
FA-2-1
FA-2-2
FA-2-3
FA-2-4
FA-2-5
FA-3-1(L)*
FA-3-2(U)*
FA-3-2(L)*
FA-4-1(L)*
FA-4-2(L)*
FA-4-3(U)*
FA-4-4(U)*
FA-3-2(L)*
FA-5-1(L)*
FG-53-1
FG-53-2
FP-15-2
FP-15-3
FP-15-4
FP-15-5
FP-18-1
FP-18-2
IN SET(S)
F-47
F-47B
F-47
F-47B
F-47, F-47B
F-48
F-48
F-48
F-48A
F-49
F-49B
F-49
F-50, F-50A
F-50, F-50A
F-50, F-50A
F-50
F-50A
F-38, F-51, F-52
F-38, F-52
F-53, F-54
F-53, F-54
FA-1
FA-1
FA-1
FA-1
FA-1
FA-2
FA-2
FA-2
FA-2
FA-2
FA-3
FA-3
FA-4
FA-4, FA-5
FA-4, FA-5
FA-4, FA-5
FA-4, FA-5
FA-4
FA-5
FG-53
FG-53
FP-33
FP-33
FP-33
FP-33
FP-18
FP-18
84
HOUSING
BORE
LENGTH
MAX. WALL
1.8371
1.8371
1.8222
1.8222
1.8072
2.1536
2.1339
2.1536
2.1536
2.1590
2.1590
2.1445
2.0776
2.0626
2.0476
2.0327
2.0327
2.1770
2.1920
2.3135
2.3135
1.9035
1.8985
1.8935
1.8885
1.8835
1.8435
1.8535
1.8635
1.8735
1.8835
1.1469
1.1469
1.1469
1.1469
1.1469
1.1469
1.1469
1.1469
1.1469
1.8522
1.8072
2.2950
2.2800
2.2650
2.2500
2.2040
2.1890
0.700
0.700
0.700
0.700
0.595
0.955
0.537
0.537
0.537
0.860
0.860
0.860
0.775
0.700
0.700
0.585
0.825
0.555
0.635
1.030
0.950
0.925
0.925
0.925
0.925
0.925
0.845
0.845
0.845
0.845
0.845
0.570
0.570
0.570
0.455
0.455
0.570
0.455
0.570
0.570
1.142
0.905
0.620
0.620
0.620
0.560
0.660
0.660
.0605
.0605
.0605
.0605
.0605
.0719
.0620
.0719
.0719
.0695
.0695
.0624
.0617
.0614
.0614
.0615
.0615
.0619
.0694
.0610
.0610
.0503
.0478
.0453
.0428
.0403
.0403
.0403
.0403
.0403
.0403
.0422
.0422
.0422
.0420
.0420
.0420
.0420
.0422
.0422
.0610
.0610
.0841
.0766
.0691
.0616
.0602
.0602
COMPONENT LISTING
COMPONENT
85
LENGTH
MAX. WALL
2.1740
2.1590
2.1440
2.2500
2.2500
2.2550
2.3100
1.8281
1.4148
2.0132
1.8478
1.5739
2.1875
2.1562
2.1250
1.9725
2.3280
2.3190
2.3090
2.2990
2.1420
1.8607
1.8607
1.2655
1.2655
1.2655
1.2655
2.1200
2.2820
2.1560
2.1460
2.1360
2.1260
1.6260
1.2655
1.2655
1.2655
1.2655
1.2655
1.2655
1.2655
1.1875
1.1875
1.2655
1.2655
1.2655
1.2655
1.2655
0.660
0.660
0.660
0.660
0.580
0.580
0.620
0.590
0.590
0.555
0.625
0.590
1.680
0.880
0.880
1.150
0.895
0.775
0.775
0.775
0.775
0.817
0.661
0.665
0.665
0.665
0.665
0.755
0.785
0.750
0.750
0.750
0.750
1.060
0.700
0.830
0.830
0.700
0.700
0.700
0.700
0.535
0.535
1.242
1.242
0.530
0.530
0.788
.0602
.0602
.0602
.0616
.0620
.0645
.0912
.0597
.0964
.0600
.0596
.0597
.0641
.0641
.0641
.0641
.0798
.0753
.0703
.0653
.0655
.0550
.0550
.0617
.0617
.0617
.0617
.0841
.0569
.0620
.0620
.0620
.0620
.0620
.0622
.0618
.0618
.0622
.0622
.0622
.0622
.0422
.0422
.0618
.0618
.0618
.0618
.0618
CAM BEARING
FP-18
FP-18
FP-18
FP-26
FP-30
FP-30R
FP-33
FT-1
FT-1
FT-3
FT-3
FT-3
GM-5
GM-5
GM-5
GM-5
GM-7
GM-7
GM-7
GM-7
GM-7
GMA-1
GMA-1
GMA-2
GMA-2
GMA-2
GMA-2
GMP-1
GMP-55
H-5
H-5
H-5
H-5
H-5
HA-1
HA-2
HA-2
HA-2
HA-2
HA-2
HA-2, HA-1
HA-5
HA-5
HA-4
HA-4
HA-4
HA-4
HA-5
HOUSING
BORE
COMPONENT LISTING
FP-18-3
FP-18-4
FP-18-5
FP-26-1
FP-30-1
FP-30-1R
FP-33-1
FT-1-2
FT-1-3
FT-3-1
FT-3-2
FT-3-3
GM-5-1
GM-5-2
GM-5-3
GM-5-4
GM-7-1
GM-7-2
GM-7-3
GM-7-4
GM-7-5
GMA-1-1
GMA-1-2
GMA-2-1(U)*
GMA-2-1(L)*
GMA-2-3(U)*
GMA-2-2(L)*
GMP-1-1
GMP-55-1
H-5-1
H-5-2
H-5-3
H-5-4
H-5-5
HA-1-1(U)*
HA-1-2(U)*
HA-1-3(L)*
HA-1-4(U)*
HA-1-4A(U)*
HA-1-5(U)*
HA-1-5(L)*
HA-3-3(L)*
HA-3-4(U)*
HA-4-1(U)*
HA-4-2(L)*
HA-4-3(U)*
HA-4-4(L)*
HA-5-1(L)*
IN SET(S)
COMPONENT LISTING
CAM BEARING
COMPONENT LISTING
COMPONENT
HA-5-2(U)*
HE-1-1
HE-1-2
HE-1-2A
HE-5-1
HE-5-2
HE-7-1
HE-7-1A
IN-2-3
IN-2-4
IN-3A-1
IN-5-1
IN-5-2
IN-5-3
IN-8-2
IN-8-3
IN-8-4
IN-10-1A
IN-10-2
IN-10-3
IN-10-4A
IN-11-1
IN-11-2
IN-11-3
IN-11-4
IN-11-5
IN-15-1
IN-15-2
IN-15-3
IN-16-1
IN-16-3
IN-17-1
IN-17-1S
IN-17-2
IN-17-2S
IN-18-1
IN-18-2
IN-18-3
IN-19-1
IN-19-2
IN-19-3
IN-19-4
IN-20-1
IZ-1-1
IZ-2-1
IZ-2-2
IZ-2-3
IZ-3-1
IN SET(S)
HA-5
HE-1
HE-1, HE-7, HE-8
HE-8A
HE-5
HE-5
HE7, HE-8
HE-8A
IN-3
IN-3, IN-16
IN-3, IN-12, IN-14
IN-5
IN-5
IN-5
IN-12, IN-14, IN-16
IN-12, IN-14
IN-14
IN-10A
IN-10A
IN-10A
IN-10A
IN-11
IN-11
IN-11
IN-11
IN-11
IN-15
IN-15
IN-15
IN-16
IN-16
IN-17
IN-17R2
IN-17
IN-17R2
IN-18
IN-18
IN-18
IN-19
IN-19
IN-19
IN-19
IN-20
IZ-1
IZ-2
IZ-2
IZ-2
IZ-3
86
HOUSING
BORE
LENGTH
MAX. WALL
1.2655
2.1875
2.1875
2.1862
1.8753
1.8753
2.1875
2.1862
2.2008
1.6313
2.2408
2.3748
2.2493
1.9993
2.2207
2.2007
1.6313
2.4748
2.4438
2.4153
2.3748
2.2313
2.2213
2.2113
2.2013
2.1913
2.0618
1.9368
1.4993
2.5610
2.2010
2.2313
2.2513
2.2313
2.2513
1.9430
1.7083
1.6303
2.5013
2.4813
2.4613
2.4413
2.7475
1.2215
2.0479
2.0480
2.0480
2.0486
0.788
1.125
0.812
0.812
1.020
0.550
1.057
1.057
1.062
1.530
1.125
1.438
1.469
1.063
1.062
1.062
1.312
1.187
1.000
1.000
1.000
0.710
0.645
0.645
0.645
0.750
1.000
1.375
1.000
1.125
1.060
0.785
0.785
0.650
0.650
1.095
1.005
0.790
1.010
0.709
0.709
0.710
1.010
0.630
0.984
0.984
0.984
0.866
.0618
.0660
.0660
.0653
.0617
.0617
.0658
.0653
.0645
.0645
.0647
.0644
.0642
.0643
.0647
.0647
.0645
.0618
.0625
.0613
.0618
.0647
.0647
.0647
.0647
.0647
.0643
.0643
.0643
.0645
.0645
.0647
.0647
.0647
.0647
.0645
.0641
.0641
.1078
.0980
.0880
.0780
.0625
.0591
.0790
.0790
.0790
.0797
COMPONENT LISTING
COMPONENT
87
LENGTH
MAX. WALL
2.0486
2.0486
2.0484
2.0484
2.0484
2.1274
2.1274
2.3637
2.3637
2.3165
1.5070
1.9280
1.9280
2.5000
1.9280
1.9280
2.7559
1.6250
1.7020
2.0000
1.9375
1.8810
1.3748
2.6235
2.6235
2.6235
2.6235
2.6235
2.6235
2.6235
2.3115
2.2495
2.2448
2.2448
2.2448
2.2448
2.2448
2.2448
2.2448
2.3035
2.2839
2.2445
1.4225
1.4225
1.4225
1.4971
1.4971
1.4971
0.866
0.866
0.866
0.866
0.866
0.984
0.866
0.787
0.787
1.125
1.317
1.181
0.938
1.000
1.598
1.220
1.005
1.090
1.090
0.875
0.937
1.620
1.156
1.380
1.385
1.010
1.010
1.380
1.385
1.225
1.760
1.760
1.417
1.024
1.024
1.024
1.417
1.024
1.024
1.624
1.033
1.191
0.795
0.795
0.795
0.793
0.793
0.793
.0797
.0797
.0770
.0770
.0787
.0797
.0797
.0785
.0785
.0645
.0752
.0579
.0579
.0614
.0577
.0577
.0573
.0608
.0998
.0628
.0630
.0628
.0628
.1852
.0910
.0905
.0910
.1853
.0910
.0910
.1237
.1243
.0490
.0490
.0589
.0785
.0490
.0490
.0589
.0790
.0690
.0790
.0422
.0422
.0422
.0792
.0792
.0792
CAM BEARING
IZ-3
IZ-3
IZ-4
IZ-4
IZ-4
IZ-5
IZ-5
IZ-6, IZ-7, IZ-8
IZ-6, IZ-7, IZ-8
J-1
JA-1
JD-1, JD-2
JD-1, JD-2
JD-3, JD-4
JD-5
JD-5
JD-6
JDG-7
JDG-7R
K-1, CO-8
K-1, CO-3
K-1, CO-3, CO-8
K-1, CO-3, CO-8
MA-6
MA-5, MA-6, MA-7
MA-5
MA-5, MA-6, MA-7, MA-8, MA-9
MA-5, MA-6
MA-8
MA-9
MAG-10
MAG-10
MI-1
MI-1
MI-1
MI-1
MI-2
MI-2
MI-2
MI-3
MI-3
MI-3
MIA-1, MIA-4
MIA-1
MIA-1, MIA-4
MIA-2
MIA-2
MIA-2
HOUSING
BORE
COMPONENT LISTING
IZ-3-2
IZ-3-3
IZ-4-1
IZ-4-2
IZ-4-3
IZ-5-1
IZ-5-2
IZ-6-1
IZ-6-2
J-1-1
JA-1-1
JD-1-1
JD-1-2
JD-3-1
JD-5-1
JD-5-2
JD-6-1
JDG-7-1
JDG-7-1R
K-1-1
K-1-2
K-1-3
K-1-4
MA-3A-1
MA-5-1
MA-5-2
MA-5-3
MA-5-4
MA-8-1
MA-9-1
MAG-10-1
MAG-10-2
MI-1-1
MI-1-2
MI-1-3
MI-1-4
MI-2-1
MI-2-2
MI-2-3
MI-3-1
MI-3-2
MI-3-3
MIA-1-1(U)*
MIA-1-3(U)*
MIA-1-4(L)*
MIA-1-5(U)*
MIA-1-6(L)*
MIA-1-7(U)*
IN SET(S)
COMPONENT LISTING
CAM BEARING
COMPONENT LISTING
COMPONENT
MIA-1-8(U)*
MIA-3-1
MIA-5-1(U)*
MIA-5-2(U)*
MIA-5-3(U)*
MIA-5-5(L)*
MIA-5-6(L)*
MIA-5-7(L)*
MIA-5-8(U)*
MIA-5-9(L)*
MIG-2-1
MIG-2-1R
MIG-2-2
MIG-1-EL
MIG-2-EL
MIG-3-1
MIG-3-2
MZ-1-1
MZ-1-2
MZ-1-3
MZA-1-1
MZA-1-2
MZA-1-3
MZA-2-1(U)*
MZA-2-2(L)*
MZA-2-3(U)*
MZA-2-3(L)*
MZG-3-1
MZG-3-2
MZG-3-3
N-5-2
N-5-3
N-5-4
N-6-1
N-7-1
N-7-2
N-7-2B
N-7-3
N-7-3B
N-7-4
N-8-2
N-8-3
N-8-4
N-8-5
N-9-1
NI-1-1
NI-1-2
NI-1-3
IN SET(S)
MIA-4
MIA-3
MIA-5
MIA-5
MIA-5
MIA-5
MIA-5
MIA-5
MIA-5
MIA-5
MIG-2
INDIVIDUAL
MIG-2
MIG-2E
MIG-2E
MIG-3
MIG-3
MZ-1
MZ-1
MZ-1
MZA-1
MZA-1
MZA-1
MZA-2
MZA-2
MZA-2
VWA-1
MZG-3
MZG-3
MZG-3
N-6
N-6
N-6
N-6
N-7
N-7
N-7B
N-7
N-7B
N-7
N-9
N-9
N-9
N-9
N-9
NI-1
NI-1
NI-1
88
HOUSING
BORE
LENGTH
MAX. WALL
1.4225
1.8918
1.4225
1.4225
1.4225
1.4225
1.4225
1.4225
1.4225
1.4225
1.8126
1.9855
1.0240
1.8126
0.6330
1.7721
1.7328
2.0874
2.0480
1.8905
1.7931
1.7931
1.7931
1.3439
1.3439
1.3439
1.3439
1.8114
1.7327
0.9453
1.9370
1.9270
1.9170
1.9470
1.1560
2.1460
2.1460
2.1360
2.1360
2.1260
2.2160
2.1860
2.1560
2.1260
2.2460
2.3780
2.3701
2.3622
0.795
0.685
0.793
0.710
0.760
0.793
0.710
0.760
0.980
0.980
0.785
0.788
0.703
0.930
0.875
0.745
0.825
0.984
1.102
0.984
0.730
0.730
0.730
0.700
0.830
0.830
0.830
0.910
1.030
0.635
0.780
0.780
0.810
0.940
0.690
0.690
0.690
0.690
0.690
0.690
0.625
0.625
0.625
0.625
0.920
1.102
1.024
1.024
.0422
.0403
.0422
.0422
.0422
.0422
.0422
.0422
.0422
.0422
.0587
.1450
.0589
NA
NA
.0590
.0592
.0593
.0593
.0593
.0403
.0403
.0403
.0422
.0422
.0422
.0422
.0781
.0780
.0585
.0647
.0647
.0647
.0647
.0620
.0620
.0620
.0620
.0620
.0620
.0620
.0620
.0620
.0620
.0620
.0596
.0596
.0596
COMPONENT LISTING
COMPONENT
89
LENGTH
MAX. WALL
2.0660
2.0580
2.0460
2.0340
1.7340
1.7340
1.7340
1.9309
1.9702
1.7538
1.8914
1.8914
2.1288
2.1688
2.1488
2.1288
2.1088
2.0888
2.1688
1.5000
2.1069
2.0970
2.0773
2.0873
2.0307
2.0307
2.1295
2.0990
2.0675
2.0990
2.0675
2.1300
2.1300
1.5675
2.1140
2.0990
2.0830
1.6925
2.1140
2.0990
2.0830
1.8800
2.0990
2.0830
2.1300
2.1300
2.1300
2.1300
1.156
0.750
0.750
1.250
0.805
0.805
1.120
0.735
1.235
0.735
0.805
0.805
0.688
0.688
0.688
0.688
0.688
0.688
0.688
0.697
0.950
0.723
0.723
0.723
1.060
0.680
1.093
0.875
0.875
1.062
1.062
0.938
0.813
0.875
0.760
0.760
0.760
0.940
0.750
0.669
0.750
0.750
0.750
0.750
0.875
0.750
0.920
0.780
.0648
.0648
.0648
.0648
.0403
.0403
.0403
.0403
.0403
.0403
.0403
.0403
.0641
.0646
.0646
.0646
.0646
.0646
.0646
.0619
.0889
.0889
.0840
.0865
.0644
.0644
.0645
.0649
.0650
.0650
.0650
.0647
.0647
.0647
.0645
.0645
.0645
.0645
.0645
.0645
.0645
.0645
.0645
.0645
.0645
.0645
.0645
.0640
CAM BEARING
NI-2
NI-2
NI-2
NI-2
NIA-1, NIA-4
NIA-4
NIA-4
NIA-2L, NIA-2R, NIA-3L, NIA-3R
NIA-3R
NIA-3L, NIA-3R
NIA-5
NIA-5
O-5
O-6
O-6, O-7, O-8
O-6, O-7, O-8
O-6, O-7, O-8
O-6, O-7
O-7, O-8
ON-1
OP-3, OP-5
OP-3, OP-5
OP-3, OP-5
OP-5
P-3
P-3, P-4
PD-1, PD-3
PD-1
PD-1
PD-3
PD-3
PD-8
PD-8
PD-8
PD-16
PD-16
PD-16
PD-16, PD-25, PD-27
PD-17, PD-18
PD-17
PD-17
PD-17
PD-18
PD-18, PD-21
PD-16, PD-25, PD-27
PD-17
PD-18
PD-21
HOUSING
BORE
COMPONENT LISTING
NI-2-1
NI-2-2
NI-2-3
NI-2-4
NIA-1-1
NIA-1-2
NIA-1-3
NIA-2-1
NIA-3-1
NIA-3-2
NIA-4-1
NIA-4-2
O-5-1
O-6-1
O-6-2
O-6-3
O-6-4
O-6-5
O-7-1
ON-1-1
OP-3-1
OP-3-2
OP-3-3
OP-5-3
P-3-1
P-3-2
PD-1-1
PD-1-2
PD-1-3
PD-3-2
PD-3-3
PD-8-1
PD-8-2
PD-8-3
PD-9-2
PD-9-3
PD-9-4
PD-9-5
PD-12-2
PD-12-3
PD-12-4
PD-12-5
PD-13-3
PD-13-4
PD-16-1
PD-17-1
PD-18-1
PD-21-1
IN SET(S)
COMPONENT LISTING
CAM BEARING
COMPONENT LISTING
COMPONENT
PD-21-2
PD-21-3
PD-25-2
PD-25-3
PD-25-4
PD-28-1
PD-28-2
PD-28-2B
PD-28-3
PD-28-3B
PD-28-4
PD-30-1
PD-30-2
PD-30-3
PD-30-4
PD-30-5
PD-30-6
PDA-1-1(L)*
PDA-1-2(U)*
PDA-2-1(L)*
PDA-2-2(U)*
PDA-3-1
PDA-3-2
PDA-3-3
PDA-3-4
PDA-3-5
PDG-26-1
PDG-26-2
PDG-29-1
PDP-9-2
PDP-9-3
PDP-9-4
PDP-9-5
PDP-12-2
PDP-12-3
PDP-12-4
PDP-12-5
PDP-16-1
PDP-17-1
PDP-25-2
PDP-25-3
PDP-25-4
PP-3-1
PP-3-2
R-1-1
R-1-2
R-1-3
R-1-4
IN SET(S)
PD-21
PD-21
PD-25, PD-27
PD-25
PD-25, PD-27
PD-28
PD-28
PD-28B
PD-28
PD-28B
PD-28
PD-30
PD-30
PD-30
PD-30
PD-30
PD-30
PDA-1
PDA-1
PDA-2
PDA-2
PDA-3
PDA-3
PDA-3
PDA-3
PDA-3
PDG-26
PDG-26
PDG-29S
PDP-16
PDP-16
PDP-16
PDP-16, PDP-25
PDP-17
PDP-17
PDP-17
PDP-17
PDP-16, PDP-25
PDP-17
PDP-25
PDP-25
PDP-25
PP-3
PP-3, PP-4
R-1
R-1
R-1
R-1
90
HOUSING
BORE
LENGTH
MAX. WALL
2.1140
2.0990
2.1140
2.0990
2.0830
2.1300
2.1140
2.1140
2.0990
2.0990
2.0830
2.2235
2.2075
2.1915
2.1755
2.1595
2.0495
1.4819
1.4819
1.4819
1.4819
1.7035
1.7195
1.7345
1.7505
1.7665
1.8110
0.9055
1.7866
2.1140
2.0990
2.0830
1.6925
2.1140
2.0990
2.0830
1.8800
2.1300
2.1300
2.1140
2.0990
2.0830
2.0100
2.0307
2.5620
2.4370
2.3120
1.7500
0.625
0.625
0.625
0.615
0.615
0.930
0.610
0.610
0.610
0.610
0.610
0.885
0.625
0.625
0.625
0.625
0.885
0.625
0.625
0.625
0.625
0.815
0.775
0.775
0.775
0.745
0.745
0.825
0.865
0.760
0.760
0.760
0.940
0.750
0.669
0.750
0.750
0.875
0.750
0.625
0.615
0.615
1.060
0.680
1.625
1.250
1.250
1.187
.0640
.0640
.0645
.0645
.0645
.0647
.0653
.0653
.0653
.0653
.0647
.0650
.0650
.0650
.0650
.0650
.0650
.0522
.0522
.0422
.0422
.0404
.0406
.0402
.0404
.0404
.0640
.0640
.08 Semi
.0643
.0643
.0645
.0645
.0645
.0645
.0645
.0645
.0643
.0645
.0645
.0645
.0645
.0644
.0644
.0610
.0610
.0610
.0613
COMPONENT LISTING
COMPONENT
91
LENGTH
MAX. WALL
1.7131
1.6737
1.8215
1.8295
1.8375
1.8455
1.8535
2.0475
1.9885
1.8705
1.9685
1.9685
1.9685
1.8895
1.8705
1.8510
1.8311
1.9688
1.9688
1.9688
1.9688
1.9691
1.9593
1.9297
1.9400
1.9494
1.4971
1.4971
1.9295
1.9688
1.9697
1.9598
1.9303
1.9402
1.9500
1.4977
1.4977
2.0102
2.0102
2.0102
2.2638
2.2539
2.2047
2.2047
2.2146
1.3841
1.3841
1.3841
0.758
0.492
0.940
0.485
0.485
0.485
0.485
1.143
0.943
0.984
1.095
1.654
0.985
0.715
0.715
0.715
0.715
1.142
0.790
0.750
1.105
0.705
0.625
0.705
0.625
0.705
1.103
0.793
0.943
1.810
0.709
0.630
0.709
0.630
0.709
1.103
0.787
0.933
0.780
0.933
0.787
0.787
0.787
0.787
0.787
0.800
0.800
0.800
.0610
.0595
.0407
.0407
.0407
.0407
.0407
.0785
.0785
.0785
.0685
.0735
.0785
.0929
.0885
.0835
.0786
.0686
.0735
.0835
.0884
.0687
.0687
.0588
.0687
.0785
.0591
.0591
.0785
.0785
.0689
.0689
.0591
.0689
.0788
.0594
.0594
.0754
.0793
.0833
.0791
.0791
.0594
.0644
.0742
.0422
.0422
.0418
CAM BEARING
RN-1
RN-1
SA-1
SA-1
SA-1
SA-1
SA-1
TO-10
TO-10
TO-10
TO-2
TO-2
TO-2
TO-3
TO-3
TO-3
TO-3
TO-11
TO-11
TO-11
TO-11
TO-7
TO-7
TO-7
TO-7
TO-7
TO-8
TO-8
TO-10
TO-11
TO-12
TO-12
TO-12
TO-12
TO-12
TO-13
TO-13
TO-14
TO-14
TO-14
TO-15
TO-15
TO-15
TO-15
TO-15
NIA-6
NIA-6
TOA-1
HOUSING
BORE
COMPONENT LISTING
RN-1-1
RN-1-2
SA-1-1
SA-1-2
SA-1-3
SA-1-4
SA-1-5
TO-1-1
TO-1-2
TO-1-4
TO-2-1
TO-2-2
TO-2-3
TO-3-1
TO-3-2
TO-3-3
TO-3-4
TO-5-1
TO-5-2
TO-5-4
TO-5-5
TO-7-1
TO-7-2
TO-7-3
TO-7-4
TO-7-5
TO-8-1
TO-8-2
TO-10-3
TO-11-3
TO-12-1
TO-12-2
TO-12-3
TO-12-4
TO-12-5
TO-13-1
TO-13-2
TO-14-1
TO-14-2
TO-14-3
TO-15-1
TO-15-2
TO-15-3
TO-15-4
TO-15-5
TOA-1-1(U)*
TOA-1-2(L)*
TOA-2-1(L)*
IN SET(S)
COMPONENT LISTING
CAM BEARING
COMPONENT LISTING
COMPONENT
TOA-2-2(U)*
TOG-8-1
TOG-8-2
TOG-9-1
TOG-9-2
TOG-10-1
TOG-10-2
VHA-1-2(U)*
VO-2-1
VO-2-2
VO-2-3
VOA-1-1(L)*
VW-1-1
VW-1-2
VW-1-3(U)*
VW-1-3(L)*
VWA-1-1(U)*
VWA-1-2(U)*
VWA-1-3(L)*
VWA-1-4(U)*
VWA-1-5(L)*
VWA-2-1(L)*
VWA-2-2(U)*
VWG-1-1
VWG-1-2
WA-1-1
WA-3-1
WA-3-2
WA-3-3
IN SET(S)
TOA-1
TOG-8
TOG-8
TOG-9
TOG-9
TOG-10
TOG-10
VOA-1
VO-2, VO-3
VO-2
VO-2
VOA-1
VW-1
VW-1
VW-1
VW-1
VWA-1
VWA-1
VWA-1
VWA-1
VWA-1
VWA-2
VWA-2
VWG-1
VWG-1
WA-4, WA-7
WA-3
WA-3
WA-3
92
HOUSING
BORE
LENGTH
MAX. WALL
1.3841
1.9682
1.7714
1.7719
1.4569
1.6541
1.6350
1.2655
1.9655
1.8081
1.5724
1.2655
1.0831
1.0831
1.0831
1.0831
1.3439
1.2655
1.2655
1.2655
1.2655
1.1085
1.1085
1.8115
1.7721
1.8750
2.2540
2.0040
1.6290
0.800
0.975
0.785
0.640
0.640
0.800
0.895
0.700
1.060
1.025
1.100
0.700
0.787
0.906
1.102
0.984
0.830
0.830
0.630
0.630
0.700
0.680
0.680
0.585
0.585
1.000
1.125
1.312
1.500
.0418
.0784
.0784
.0788
.0788
.0783
.0790
.0422
.0570
.0570
.0573
.0422
.0490
.0490
.0490
.0490
.0422
.0422
.0422
.0422
.0422
.0422
.0422
.0590
.0590
.0617
.0643
.0645
.0645
HOUSING
BORE
1.3439
1.3745
1.3748
1.3841
1.3841
1.3841
1.3841
1.4148
1.4225
1.4225
1.4225
1.4225
1.4225
1.4225
1.4225
1.4225
1.4225
1.4225
1.4225
1.4225
1.4569
1.4587
1.4587
1.4819
1.4819
1.4819
1.4819
1.4971
1.4971
1.4971
1.4971
1.4971
1.4977
1.4977
1.4993
1.5000
1.5039
1.5070
1.5675
1.5682
1.5724
1.5739
1.5760
1.5760
1.5760
1.5772
1.6250
1.6260
1.6290
1.6303
COMPONENT
MIG-2-EL
PDG-26-2
MZG-3-3
MIG-2-2
VW-1-1
VW-1-2
VW-1-3(L)*
VW-1-3(U)*
VWA-2-1(L)*
VWA-2-2(U)*
FA-4-1(L)*
FA-4-2(L)*
FA-3-1(L)*
FA-3-2(U)*
FA-3-2(L)*
FA-4-4(U)*
FA-4-3(U)*
FA-3-2(L)*
FA-5-1(L)*
N-7-1
HA-3-3(L)*
HA-3-4(U)*
IZ-1-1
HA-4-3(U)*
HA-4-4(L)*
VWA-1-3(L)*
VWA-1-4(U)*
GMA-2-1(U)*
GMA-2-1(L)*
GMA-2-3(U)*
GMA-2-2(L)*
VHA-1-2(U)*
VOA-1-1(L)*
VWA-1-5(L)*
HA-1-1(U)*
HA-1-4(U)*
HA-1-4A(U)*
HA-1-5(U)*
HA-1-5(L)*
HA-5-1(L)*
HA-5-2(U)*
VWA-1-2(U)*
HA-1-2(U)*
HA-1-3(L)*
HA-4-1(U)*
HA-4-2(L)*
MZA-2-1(U)*
MZA-2-2(L)*
MZA-2-3(U)*
MZA-2-3(L)*
93
LENGTH
0.830
1.000
1.156
0.800
0.800
0.800
0.800
0.590
0.710
0.710
0.760
0.760
0.793
0.793
0.795
0.795
0.795
0.795
0.980
0.980
0.640
1.000
1.390
0.625
0.625
0.625
0.625
0.793
0.793
0.793
0.793
1.103
0.787
1.103
1.000
0.697
0.533
1.317
0.875
0.875
1.100
0.590
0.787
0.787
0.787
0.800
1.090
1.060
1.500
0.790
MAX.
WALL
.0422
.0615
.0628
.0418
.0418
.0422
.0422
.0964
.0422
.0422
.0422
.0422
.0422
.0422
.0422
.0422
.0422
.0422
.0422
.0422
.0788
.0398
.0403
.0422
.0422
.0522
.0522
.0591
.0792
.0792
.0792
.0591
.0594
.0594
.0643
.0619
.0644
.0752
.0647
.0642
.0573
.0597
.0596
.0695
.0793
.0403
.0608
.0620
.0645
.0641
COMPONENT
VWA-1-1(U)*
BU-1-3
K-1-4
TOA-2-1(L)*
TOA-2-2(U)*
TOA-1-1(U)*
TOA-1-2(L)*
FT-1-3
MIA-5-2(U)*
MIA-5-6(L)*
MIA-5-3(U)*
MIA-5-7(L)*
MIA-5-1(U)*
MIA-5-5(L)*
MIA-1-1(U)*
MIA-1-3(U)*
MIA-1-4(L)*
MIA-1-8(U)*
MIA-5-8(U)*
MIA-5-9(L)*
TOG-9-2
BMA-4-3
BMA-1-4
PDA-2-1(L)*
PDA-2-2(U)*
PDA-1-1(L)*
PDA-1-2(U)*
TO-8-2
MIA-1-5(U)*
MIA-1-6(L)*
MIA-1-7(U)*
TO-8-1
TO-13-2
TO-13-1
IN-15-3
ON-1-1
BL-1-3
JA-1-1
PD-8-3
C-2-2
VO-2-3
FT-3-3
DI-1-1
DI-1-2
DI-1-3
BMA-1-10
JDG-7-1
H-5-5
WA-3-3
IN-18-3
PROGRESSIVE LISTING
MAX.
WALL
NA
.0640
.0585
.0589
.0490
.0490
.0490
.0490
.0422
.0422
.0420
.0420
.0422
.0422
.0422
.0420
.0420
.0422
.0422
.0620
.0422
.0422
.0591
.0618
.0618
.0422
.0422
.0617
.0617
.0617
.0617
.0422
.0422
.0422
.0622
.0622
.0622
.0622
.0622
.0618
.0618
.0422
.0618
.0618
.0618
.0618
.0422
.0422
.0422
.0422
CAM BEARING
HOUSING
BORE
LENGTH
0.6330
0.875
0.9055
0.825
0.9453
0.635
1.0240
0.703
1.0831
0.787
1.0831
0.906
1.0831
0.984
1.0831
1.102
1.1085
0.680
1.1085
0.680
1.1469
0.455
1.1469
0.455
1.1469
0.570
1.1469
0.570
1.1469
0.570
1.1469
0.455
1.1469
0.570
1.1469
0.570
1.1469
0.570
1.1560
0.690
1.1875
0.535
1.1875
0.535
1.2215
0.630
1.2655
0.530
1.2655
0.530
1.2655
0.630
1.2655
0.630
1.2655
0.665
1.2655
0.665
1.2655
0.665
1.2655
0.665
1.2655
0.700
1.2655
0.700
1.2655
0.700
1.2655
0.700
1.2655
0.700
1.2655
0.700
1.2655
0.700
1.2655
0.700
1.2655
0.788
1.2655
0.788
1.2655
0.830
1.2655
0.830
1.2655
0.830
1.2655
1.242
1.2655
1.242
1.3439
0.700
1.3439
0.830
1.3439
0.830
1.3439
0.830
PROGRESSIVE LISTING
CAM BEARING
HOUSING
BORE
LENGTH
1.6313
1.312
1.6313
1.530
1.6350
0.895
1.6541
0.800
1.6737
0.492
1.6855
1.072
1.6890
0.685
1.6890
0.790
1.6890
0.790
1.6925
0.940
1.6925
0.940
1.7020
1.090
1.7035
0.815
1.7083
1.005
1.7131
0.758
1.7195
0.775
1.7285
0.595
1.7327
1.030
1.7328
0.825
1.7340
0.805
1.7340
0.805
1.7340
1.085
1.7340
1.120
1.7345
0.775
1.7435
0.700
1.7495
0.555
1.7495
0.812
1.7495
0.947
1.7500
1.187
1.7505
0.775
1.7538
0.735
1.7539
0.755
1.7585
0.700
1.7585
0.775
1.7665
0.745
1.7714
0.785
1.7719
0.640
1.7721
0.585
1.7721
0.745
1.7734
0.775
1.7741
1.115
1.7750
0.500
1.7755
0.785
1.7775
0.500
1.7866
0.865
1.7918
0.555
1.7931
0.730
1.7931
0.730
1.7931
0.730
1.7960
1.125
MAX.
WALL
.0645
.0645
.0790
.0783
.0595
.1020
.0633
.0633
.0633
.0645
.0645
.0998
.0404
.0641
.0610
.0406
.0604
.0780
.0592
.0403
.0403
.0400
.0403
.0402
.0604
.0625
.0624
.0625
.0613
.0404
.0403
.0644
.0604
.0604
.0404
.0784
.0788
.0590
.0590
.0604
.0403
.0606
.0600
.0614
.08 Semi
.0625
.0403
.0403
.0403
.0644
HOUSING
BORE
1.7965
1.7975
1.8072
1.8072
1.8081
1.8110
1.8114
1.8115
1.8115
1.8125
1.8126
1.8126
1.8131
1.8131
1.8215
1.8222
1.8222
1.8265
1.8281
1.8295
1.8311
1.8312
1.8371
1.8371
1.8375
1.8435
1.8455
1.8478
1.8509
1.8510
1.8521
1.8522
1.8524
1.8524
1.8535
1.8535
1.8555
1.8555
1.8565
1.8607
1.8607
1.8635
1.8705
1.8705
1.8735
1.8740
1.8750
1.8750
1.8753
1.8753
COMPONENT
IN-8-4
IN-2-4
TOG-10-2
TOG-10-1
RN-1-2
DE-6-1S
F-28-2
F-28-1
F-28-3
PD-9-5
PDP-9-5
JDG-7-1R
PDA-3-1
IN-18-2
RN-1-1
PDA-3-2
F-31-4
MZG-3-2
MIG-3-2
NIA-1-1
NIA-1-2
BMA-1-9
NIA-1-3
PDA-3-3
F-31-3
DA-1-5
DA-2-3
DA-3-3A
R-1-4
PDA-3-4
NIA-3-2
BL-1-2
F-31-2
F-42-1
PDA-3-5
TOG-8-2
TOG-9-1
VWG-1-2
MIG-3-1
F-31-1
BMA-1-8
AGB-29-1
F-29-1
AGB-34-2
PDG-29-1
DA-1-4
MZA-1-1
MZA-1-2
MZA-1-3
BL-1-1
94
LENGTH
0.750
0.500
0.595
0.905
1.025
0.745
0.910
0.555
0.585
1.135
0.785
0.930
0.800
0.800
0.940
0.700
0.700
0.750
0.590
0.485
0.715
0.555
0.700
0.700
0.485
0.845
0.485
0.625
0.930
0.715
0.780
1.142
0.800
0.995
0.485
0.845
0.865
1.070
0.750
0.661
0.817
0.845
0.715
0.984
0.845
0.835
0.573
1.000
0.550
1.020
MAX.
WALL
.0643
.0714
.0605
.0610
.0570
.0640
.0781
.0625
.0590
.0626
.0587
NA
.0403
.0500
.0407
.0605
.0605
.0643
.0597
.0407
.0786
.0625
.0605
.0605
.0407
.0403
.0407
.0596
.0625
.0835
.0605
.0610
.0403
.0500
.0407
.0403
.0625
.0624
.0643
.0550
.0550
.0403
.0885
.0785
.0403
.1860
.0626
.0617
.0617
.0617
COMPONENT
B-4-5
AGB-34-1
F-47-4
FG-53-2
VO-2-2
PDG-26-1
MZG-3-1
DA-1-3
VWG-1-1
CO-9-3
MIG-2-1
MIG-1-EL
BMA-1-3
BMA-1-7
SA-1-1
F-47-3
F-47-3B
B-4-4
FT-1-2
SA-1-2
TO-3-4
DA-1-2
F-47-2
F-47-2B
SA-1-3
FA-2-1
SA-1-4
FT-3-2
DA-1-1
TO-3-3
F-47-1
FG-53-1
BMA-1-2
BMA-1-6
SA-1-5
FA-2-2
DA-3-2
DA-2-2
B-4-3
GMA-1-2
GMA-1-1
FA-2-3
TO-3-2
TO-1-4
FA-2-4
CHG-15-1
CO-9-2
WA-1-1
HE-5-2
HE-5-1
HOUSING
BORE
1.9299
1.9299
1.9303
1.9309
1.9335
1.9365
1.9365
1.9368
1.9370
1.9370
1.9375
1.9375
1.9400
1.9402
1.9430
1.9470
1.9485
1.9494
1.9500
1.9593
1.9598
1.9635
1.9655
1.9682
1.9685
1.9685
1.9685
1.9688
1.9688
1.9688
1.9688
1.9688
1.9691
1.9695
1.9695
1.9695
1.9697
1.9702
1.9725
1.9725
1.9765
1.9785
1.9855
1.9885
1.9965
1.9993
1.9995
1.9995
2.0000
2.0000
COMPONENT
F-29-2
C-3-1
C-2-1
PD-12-5
PDP-12-5
CA-4-2
CA-3-2
CA-9-1
A-1-1
CA-3-3
CA-4-1
CA-3-1
K-1-3
FA-2-5
FA-1-5
B-6-1
FA-1-4
TO-3-1
AGB-14-1
MZ-1-3
NIA-4-1
NIA-4-2
MIA-3-1
BMA-1-1
BMA-1-5
F-29-3A
FA-1-3
FA-1-2
F-34-1
F-34-1B
FA-1-1
DA-3-1
DA-2-1
B-9-2
BP-9-2
B-11-1
B-11-1B
BP-11-1
B-4-1
N-5-4
F-34-1S
N-5-3
JD-1-2
JD-1-1
JD-5-2
F-1-2
JD-5-1
F-1-1
TO-10-3
TO-7-3
95
LENGTH
0.714
0.949
0.709
0.735
0.720
0.750
0.750
1.375
0.780
1.250
0.937
1.323
0.625
0.630
1.095
0.940
0.720
0.705
0.709
0.625
0.630
0.720
1.060
0.975
0.985
1.095
1.654
0.750
0.790
1.105
1.142
1.810
0.705
0.782
0.782
0.782
0.709
1.235
0.937
1.150
0.630
0.720
0.788
0.943
0.745
1.063
0.630
0.720
0.710
0.740
MAX.
WALL
.0794
.0794
.0591
.0403
.0607
.0743
.0743
.0643
.0647
.0940
.0630
.0626
.0687
.0689
.0645
.0647
.0682
.0785
.0788
.0687
.0689
.0757
.0570
.0784
.0785
.0685
.0735
.0835
.0735
.0884
.0686
.0785
.0687
.0596
.0695
.0793
.0689
.0403
.0644
.0641
.0641
.0832
.1450
.0785
.0741
.0643
.0640
.0640
.0644
.0644
COMPONENT
F-41-2
F-41-1
TO-12-3
NIA-2-1
F-17-4
B-13-1
BP-13-1
IN-15-2
N-5-2
CO-7-4
K-1-2
CO-9-1
TO-7-4
TO-12-4
IN-18-1
N-6-1
F-17-3
TO-7-5
TO-12-5
TO-7-2
TO-12-2
F-17-2
VO-2-1
TOG-8-1
TO-2-3
TO-2-1
TO-2-2
TO-5-4
TO-5-2
TO-5-5
TO-5-1
TO-11-3
TO-7-1
DI-2-1
DI-2-2
DI-2-3
TO-12-1
NIA-3-1
CH-2-4
GM-5-4
B-14-2
F-32-1
MIG-2-1R
TO-1-2
B-14-1
IN-5-3
CH-18-2
CH-18-2A
CH-20-1
CH-4-3
PROGRESSIVE LISTING
MAX.
WALL
.0600
.0637
.0641
.0645
.0645
.0642
.0642
.0640
.0642
.0642
.0643
.0642
.0628
.0403
.0403
.0642
.0428
.0929
.0586
.0593
.0403
.0403
.0403
.0403
.0500
.0600
.0453
.0478
.0638
.0638
.0503
.0625
.0624
.0642
.0642
.0642
.0642
.0642
.0643
.0647
.0738
.0647
.0579
.0579
.0577
.0648
.0577
.0648
.0785
.0588
CAM BEARING
HOUSING
BORE
LENGTH
1.8785
0.665
1.8797
0.620
1.8797
0.750
1.8800
0.750
1.8800
0.750
1.8805
0.495
1.8805
0.718
1.8805
0.970
1.8805
1.125
1.8805
1.187
1.8805
1.218
1.8805
1.312
1.8810
1.620
1.8835
0.845
1.8835
0.925
1.8865
0.750
1.8885
0.925
1.8895
0.715
1.8895
0.984
1.8905
0.984
1.8914
0.805
1.8914
0.805
1.8918
0.685
1.8918
0.800
1.8918
0.800
1.8935
0.625
1.8935
0.925
1.8985
0.925
1.9011
0.693
1.9011
0.693
1.9035
0.925
1.9155
0.945
1.9155
1.455
1.9165
0.620
1.9165
0.620
1.9165
0.750
1.9165
0.750
1.9165
0.750
1.9165
0.750
1.9170
0.810
1.9203
0.693
1.9270
0.780
1.9280
0.938
1.9280
1.181
1.9280
1.220
1.9280
1.312
1.9280
1.598
1.9280
1.600
1.9295
0.943
1.9297
0.705
PROGRESSIVE LISTING
CAM BEARING
HOUSING
BORE
LENGTH
2.0000
0.740
2.0000
0.860
2.0000
0.875
2.0040
1.312
2.0055
1.308
2.0095
0.625
2.0100
0.625
2.0100
0.740
2.0100
0.740
2.0100
0.860
2.0100
0.940
2.0100
0.940
2.0100
0.940
2.0100
1.060
2.0100
1.172
2.0102
0.780
2.0102
0.933
2.0102
0.933
2.0132
0.555
2.0199
0.625
2.0200
0.740
2.0200
0.740
2.0200
0.860
2.0300
0.740
2.0300
0.740
2.0307
0.680
2.0307
0.680
2.0307
1.060
2.0327
0.585
2.0327
0.825
2.0340
1.250
2.0350
0.937
2.0400
0.740
2.0460
0.750
2.0475
1.143
2.0476
0.700
2.0479
0.984
2.0480
0.984
2.0480
0.984
2.0480
1.102
2.0484
0.866
2.0484
0.866
2.0484
0.866
2.0486
0.866
2.0486
0.866
2.0486
0.866
2.0495
0.885
2.0500
0.740
2.0580
0.620
2.0580
0.620
MAX.
WALL
.0644
.0644
.0628
.0645
.0643
.0691
.0691
.0694
.0694
.0694
.0694
.0694
.0694
.0644
.0691
.0793
.0754
.0833
.0600
.0741
.0744
.0744
.0744
.0744
.0795
.0644
.0644
.0644
.0615
.0615
.0648
.0644
.0844
.0648
.0785
.0614
.0790
.0790
.0790
.0593
.0770
.0770
.0787
.0797
.0797
.0797
.0650
.0894
.0648
.0648
HOUSING
BORE
2.0580
2.0580
2.0580
2.0580
2.0600
2.0618
2.0626
2.0660
2.0675
2.0675
2.0773
2.0776
2.0830
2.0830
2.0830
2.0830
2.0830
2.0830
2.0830
2.0830
2.0873
2.0874
2.0887
2.0887
2.0888
2.0970
2.0975
2.0975
2.0990
2.0990
2.0990
2.0990
2.0990
2.0990
2.0990
2.0990
2.0990
2.0990
2.0990
2.0990
2.1069
2.1087
2.1088
2.1140
2.1140
2.1140
2.1140
2.1140
2.1140
2.1140
COMPONENT
CHP-4-3
CH-5-3
K-1-1
WA-3-2
A-2-1
CH-18-4
CH-18-1A
CH-4-2
CHP-4-2
CH-5-2
CH-4-4
CH-5-4
CHP-4-4
PP-3-1
CHG-22-1
TO-14-2
TO-14-1
TO-14-3
FT-3-1
CH-19-1
CH-4-1
CHP-4-1
CH-5-1
CHP-4-11
CH-4-1S
P-3-2
PP-3-2
P-3-1
F-50-4
F-50-4A
NI-2-4
CH-2-3
CHP-4-12
NI-2-3
TO-1-1
F-50-3
IZ-2-1
IZ-2-2
IZ-2-3
MZ-1-2
IZ-4-1
IZ-4-2
IZ-4-3
IZ-3-1
IZ-3-2
IZ-3-3
PD-30-6
CHP-4-13
F-9-2B
F-9-3
96
LENGTH
0.750
0.875
0.875
0.875
0.740
1.000
0.700
1.156
0.875
1.062
0.723
0.775
0.610
0.615
0.615
0.750
0.750
0.750
0.760
0.760
0.723
0.984
0.591
0.685
0.688
0.723
0.937
0.937
0.610
0.610
0.615
0.615
0.625
0.669
0.669
0.750
0.760
0.760
0.875
1.062
0.950
0.591
0.688
0.610
0.610
0.625
0.625
0.625
0.750
0.750
MAX.
WALL
.0648
.0648
.0649
.0649
.0944
.0643
.0614
.0648
.0650
.0650
.0840
.0617
.0647
.0645
.0645
.0645
.0645
.0645
.0645
.0645
.0865
.0593
.0652
.0652
.0646
.0889
.0642
.0644
.0653
.0653
.0645
.0645
.0640
.0645
.0645
.0645
.0643
.0645
.0649
.0650
.0889
.0652
.0646
.0653
.0653
.0640
.0645
.0645
.0645
.0645
COMPONENT
NI-2-2
F-9-1
F-7-2
F-22-1
CHP-4-14
IN-15-1
F-50-2
NI-2-1
PD-1-3
PD-3-3
OP-3-3
F-50-1
PD-28-4
PD-25-4
PDP-25-4
PD-12-4
PD-13-4
PDP-12-4
PD-9-4
PDP-9-4
OP-5-3
MZ-1-1
C-4-5
C-4-5A
O-6-5
OP-3-2
CH-3-4
CH-2-2
PD-28-3
PD-28-3B
PD-25-3
PDP-25-3
PD-21-3
PD-12-3
PDP-12-3
PD-13-3
PDP-9-3
PD-9-3
PD-1-2
PD-3-2
OP-3-1
C-4-4
O-6-4
PD-28-2
PD-28-2B
PD-21-2
PD-25-2
PDP-25-2
PD-12-2
PDP-12-2
HOUSING
BORE
2.1536
2.1536
2.1536
2.1560
2.1560
2.1562
2.1590
2.1590
2.1590
2.1590
2.1595
2.1599
2.1600
2.1600
2.1600
2.1687
2.1688
2.1688
2.1740
2.1740
2.1755
2.1770
2.1770
2.1860
2.1862
2.1862
2.1870
2.1870
2.1875
2.1875
2.1875
2.1875
2.1880
2.1880
2.1880
2.1890
2.1890
2.1890
2.1913
2.1915
2.1920
2.1920
2.1920
2.2007
2.2008
2.2010
2.2013
2.2040
2.2040
2.2040
COMPONENT
PDP-9-2
PD-9-2
GMP-1-1
CH-12-3
CHP-12-3
BU-1-2
BU-1-1
GM-5-3
CU-5-2A
N-8-5
N-7-4
H-5-4
IZ-5-2
IZ-5-1
C-4-3
O-5-1
O-6-3
CU-1-1
PD-1-1
PD-17-1
PDP-17-1
PD-21-1
PD-8-2
PDP-16-1
PD-16-1
PD-18-1
PD-28-1
PD-8-1
CH-12-2
CHP-12-2
CH-9-4
F-48-2
N-7-3
N-7-3B
H-5-3
CH-12-1
CHP-12-1
GM-7-5
F-18-5
FP-18-5
F-23-1A
F-23-1B
F-49-2
N-7-2
N-7-2B
H-5-2
C-4-2
O-6-2
CHP-12-11
CHP-12-21
97
LENGTH
0.537
0.955
0.537
0.625
0.750
0.880
0.660
0.660
0.860
0.860
0.625
1.125
0.860
0.937
0.980
0.591
0.688
0.688
0.660
0.660
0.625
0.555
0.555
0.625
0.812
1.057
0.905
1.905
0.812
1.057
1.125
1.680
1.190
1.323
2.010
0.660
0.660
0.723
0.750
0.625
0.635
0.635
0.635
1.062
1.062
1.060
0.645
0.660
0.660
0.660
MAX.
WALL
.0719
.0719
.0719
.0620
.0620
.0641
.0602
.0602
.0695
.0695
.0650
.0644
.1041
.0641
.1041
.0652
.0646
.0646
.0602
.0602
.0650
.0619
.0619
.0620
.0653
.0653
.0932
.0932
.0660
.0658
.0660
.0641
.1052
.3430
.1051
.0602
.0602
.0894
.0647
.0650
.0694
.0694
.0694
.0647
.0645
.0645
.0647
.0602
.0602
.0677
COMPONENT
F-48-4
F-48-1
F-48-4A
N-8-4
H-5-1
GM-5-2
F-18-4
FP-18-4
F-49-1
F-49-1B
PD-30-5
CH-2-1
CHP-12-12
CH-3-3
CHP-12-22
C-4-1
O-6-1
O-7-1
F-18-3
FP-18-3
PD-30-4
F-45-2
F-51-2
N-8-3
HE-1-2A
HE-7-1A
CU-11-2
CU-11-1
HE-1-2
HE-7-1
HE-1-1
GM-5-1
CAT-2-5
DE-6-2
CAT-2-6
F-18-2
FP-18-2
F-46-2
IN-11-5
PD-30-3
AGB-51-1
F-45-1
F-52-1
IN-8-3
IN-2-3
IN-16-3
IN-11-4
351HP-1
F-18-1
351HP-2
PROGRESSIVE LISTING
MAX.
WALL
.0643
.0645
.0841
.0841
.0841
.0615
.0615
.0641
.0644
.0620
.0620
.0620
.0797
.0797
.0652
.0641
.0646
.0644
.0645
.0645
.0645
.0640
.0647
.0643
.0645
.0645
.0647
.0647
.0891
.0891
.0894
.0620
.0620
.0620
.0620
.0941
.0941
.0655
.0602
.0602
.0624
.0624
.0624
.0620
.0620
.0620
.0652
.0646
.0991
.0991
CAM BEARING
HOUSING
BORE
LENGTH
2.1140
0.760
2.1140
0.760
2.1200
0.755
2.1200
0.980
2.1200
0.980
2.1245
0.875
2.1245
1.125
2.1250
0.880
2.1250
1.685
2.1260
0.625
2.1260
0.690
2.1260
0.750
2.1274
0.866
2.1274
0.984
2.1287
0.591
2.1288
0.688
2.1288
0.688
2.1290
2.250
2.1295
1.093
2.1300
0.750
2.1300
0.750
2.1300
0.780
2.1300
0.813
2.1300
0.875
2.1300
0.875
2.1300
0.920
2.1300
0.930
2.1300
0.938
2.1300
0.980
2.1300
0.980
2.1300
0.980
2.1339
0.537
2.1360
0.690
2.1360
0.690
2.1360
0.750
2.1400
0.860
2.1400
0.860
2.1420
0.775
2.1440
0.660
2.1440
0.660
2.1445
0.860
2.1445
0.860
2.1445
0.860
2.1460
0.690
2.1460
0.690
2.1460
0.750
2.1487
0.591
2.1488
0.688
2.1500
0.860
2.1500
0.980
PROGRESSIVE LISTING
CAM BEARING
HOUSING
BORE
LENGTH
2.2040
0.660
2.2040
0.660
2.2040
0.660
2.2040
0.660
2.2047
0.503
2.2047
0.723
2.2047
0.787
2.2047
0.787
2.2075
0.625
2.2113
0.645
2.2140
0.660
2.2140
0.660
2.2140
0.660
2.2140
0.660
2.2140
0.660
2.2146
0.787
2.2160
0.625
2.2207
1.062
2.2213
0.645
2.2225
0.937
2.2235
0.885
2.2313
0.650
2.2313
0.710
2.2313
0.785
2.2408
1.125
2.2445
1.191
2.2448
1.024
2.2448
1.024
2.2448
1.024
2.2448
1.024
2.2448
1.024
2.2448
1.417
2.2448
1.417
2.2460
0.920
2.2493
1.469
2.2495
1.000
2.2495
1.760
2.2500
0.560
2.2500
0.560
2.2500
0.560
2.2500
0.580
2.2500
0.580
2.2500
0.660
2.2500
0.660
2.2500
0.755
2.2500
0.875
2.2505
1.550
2.2513
0.650
2.2513
0.785
2.2535
1.005
MAX.
WALL
.0752
.0827
.0902
.0602
.0973
.0973
.0594
.0644
.0650
.0647
.0652
.0727
.0802
.0877
.0952
.0742
.0620
.0647
.0647
.0641
.0650
.0647
.0647
.0647
.0647
.0790
.0490
.0490
.0589
.0589
.0785
.0490
.0490
.0620
.0642
.0940
.1243
.0616
.0616
.0619
.0620
.0620
.0616
.0616
.0618
.0618
.0925
.0647
.0647
.0620
HOUSING
BORE
2.2539
2.2540
2.2550
2.2595
2.2595
2.2638
2.2650
2.2650
2.2650
2.2776
2.2776
2.2800
2.2800
2.2800
2.2820
2.2839
2.2850
2.2950
2.2950
2.2950
2.2990
2.3035
2.3073
2.3090
2.3100
2.3100
2.3115
2.3120
2.3120
2.3135
2.3135
2.3165
2.3171
2.3190
2.3270
2.3280
2.3555
2.3622
2.3630
2.3630
2.3630
2.3630
2.3637
2.3637
2.3655
2.3700
2.3701
2.3743
2.3745
2.3745
COMPONENT
351HP-3
351HP-4
351HP-5
FP-18-1
F-46-3
F-46-1
TO-15-3
TO-15-4
PD-30-2
IN-11-3
351HP-1R1
351HP-2R1
351HP-3R1
351HP-4R1
351HP-5R1
TO-15-5
N-8-2
IN-8-2
IN-11-2
CH-3-2
PD-30-1
IN-17-2
IN-11-1
IN-17-1
IN-3A-1
MI-3-3
MI-1-2
MI-2-2
MI-1-3
MI-2-3
MI-1-4
MI-1-1
MI-2-1
N-9-1
IN-5-2
CO-7-3
MAG-10-2
F-15-5
FP-15-5
F-24-5
F-30-1
FP-30-1
F-26-1
FP-26-1
F-11-2
F-8-1
DE-1-1
IN-17-2S
IN-17-1S
CU-12-1
98
LENGTH
0.787
1.125
0.580
1.000
1.385
0.787
0.620
0.620
0.620
1.190
2.005
0.620
0.620
0.620
0.785
1.033
1.125
0.620
0.620
0.620
0.775
1.624
0.630
0.775
0.620
0.620
1.760
1.000
1.250
0.950
1.030
1.125
0.630
0.775
0.630
0.895
1.510
1.024
1.027
1.027
1.027
1.027
0.787
0.787
1.510
1.505
1.024
1.094
1.156
1.437
MAX.
WALL
.0791
.0643
.0645
.0630
.0630
.0791
.0691
.0691
.0694
.0946
.0946
.0766
.0766
.0769
.0569
.0690
.0641
.0841
.0841
.0844
.0653
.0790
.0692
.0703
.0912
.0912
.1237
.0940
.0610
.0610
.0610
.0645
.0740
.0753
.0790
.0798
.0842
.0596
.0789
.0838
.0887
.0936
.0785
.0785
.0892
.0943
.0596
.0940
.0625
.0625
COMPONENT
TO-15-2
WA-3-1
FP-30-1R
A-3-2
A-3-1
TO-15-1
F-15-4
FP-15-4
F-24-4
CAT-2-3
CAT-2-4
F-15-3
FP-15-3
F-24-3
GMP-55-1
MI-3-2
CH-3-1
F-15-2
FP-15-2
F-24-2
GM-7-4
MI-3-1
CH-10-3
GM-7-3
F-33-1
FP-33-1
MAG-10-1
CO-7-2
R-1-3
F-53-2
F-53-1
J-1-1
CH-10-2
GM-7-2
CH-10-1
GM-7-1
DE-2-3
NI-1-3
DB-1-1
DB-1-2
DB-1-3
DB-1-4
IZ-6-1
IZ-6-2
DE-2-2
DE-2-2R1
NI-1-2
CO-7-1
CA-6-3
CA-6-2
HOUSING
BORE
2.8745
3.0250
3.0250
COMPONENT
CA-6-1
IN-10-4A
IN-5-1
DE-2-1
NI-1-1
DE-2-1R1
F-14-5
F-19-4
CH-13-1
CH-13-2
IN-10-3
F-19-3
F-19-2
R-1-2
IN-19-4
IN-10-2
F-19-1
IN-19-3
IN-10-1A
IN-19-2
F-16-2
JD-3-1
IN-19-1
CA-11-1
F-43-1
IN-16-1
R-1-1
CAT-2-2
CAT-2-1
F-12-1
F-16-1
MA-5-2
MA-5-3
MA-9-1
MA-3A-1
MA-5-4
MA-5-1
MA-8-1
CU-14-1
CAT-1-2
CAT-1-1
CU-13-2
CU-8-1
CU-9-1
CU-13-1
CU-9-2
DE-4-1
IN-20-1
JD-6-1
CAT-3-1
LENGTH
2.000
1.010
1.310
MAX.
WALL
.1258
.1360
.1360
COMPONENT
CAT-3-2
CAT-4-1
CAT-4-2
PROGRESSIVE LISTING
MAX.
WALL
.0625
.0618
.0644
.0942
.0596
.9930
.0610
.0609
.0643
.0643
.0613
.0609
.0609
.0610
.0780
.0625
.0609
.0880
.0618
.0980
.0629
.0614
.1078
.0773
.0708
.0645
.0610
.1243
.1243
.0617
.0629
.0905
.0910
.0910
.1852
.1853
.0910
.0910
.0621
.0750
.0750
.0937
.0939
.0939
.0937
.0939
.0774
.0625
.0573
.1258
99
CAM BEARING
HOUSING
BORE
LENGTH
2.3745
1.656
2.3748
1.000
2.3748
1.438
2.3755
1.510
2.3780
1.102
2.3855
1.505
2.3880
0.710
2.4030
0.710
2.4125
0.680
2.4125
0.680
2.4153
1.000
2.4180
0.710
2.4330
0.710
2.4370
1.250
2.4413
0.710
2.4438
1.000
2.4480
0.710
2.4613
0.709
2.4748
1.187
2.4813
0.709
2.4985
0.670
2.5000
1.000
2.5013
1.010
2.5197
0.994
2.5345
0.765
2.5610
1.125
2.5620
1.625
2.5630
1.009
2.5630
1.130
2.6000
0.755
2.6025
0.670
2.6235
1.010
2.6235
1.010
2.6235
1.225
2.6235
1.380
2.6235
1.380
2.6235
1.385
2.6235
1.385
2.6245
1.690
2.6525
0.750
2.6525
1.890
2.6870
1.070
2.6870
1.685
2.6870
1.685
2.6870
1.810
2.6870
2.185
2.7216
0.710
2.7475
1.010
2.7559
1.005
2.8745
1.190
PROGRESSIVE LISTING
CAM BEARING
®
Cam Bearing Tool
Here’s the fast, simple, economical
cam tool that eliminates hundreds
of separate, costly driving plugs
with four expanding mandrels.
The Dura-Bond Cam Bearing Tool
adjusts instantly to undersize cam
bearings; lets you put them in and
take them out of any engine. Be
smart, Do it all—fast—with one
tool from Dura-Bond.
TOOL
Part No.
Description
Part No.
Description
1-B
5” Driver
8-NS
2.250 Mandrel Sleeve
3-B
36” Driver
5-M
1.370 Mandrel
1-C
Guide Cone
6-M
1.682 Mandrel
3-E
17/32 Expander
7-M
1.875 Mandrel
4-E
15/8 Expander
8-M
2.250 Mandrel
1-S
Replacement Thread
Stud for Expanders
5-W
1.370 Metal Washer
6-W
1.682 Metal Washer
5-NS
7-W
1.875 Metal Washer
6-NS
8-W
2.2500 Metal Washer
7-NS
1 Replacement Bar Cap only for 24” and 36’’ DrIvers
Optional (not included with kit):
2-B
24” Driver
CAM BEARING
CT-1 KIT
TOOL
CAM BEARING
OHC REPAIR BEARING SERVICE INFORMATION
MAKE/MODEL(S)
ENGINE
CYL YEAR(S)
CAM BRG SET
POSITION
COMPONENTS
TOOLS
CUTTER
BUSH/QTY REQ
BAR
DBC11855
DBB1102 / 2
DB 58 (5/8")
ACURA (also see Honda)
4 CYL
HA-3*
2.2L/2156cc SOHC Honda/Accura
F22B1 Eng. Accura 2.2CL
1
2,3,4,5,6
1
2,3,4,5,6
HA-3-2(U)
HA-3-4(U)
HA-3-1(L)
HA-3-3(L)
1
2,3,4,5,6,7
1
2,3,4,5,6,7
HA-5-2(U)
HA-3-4(U)
HA-5-1(L)
HA-3-3(L)
HA-5*
5 CYL 1992-98 2.5L/2451cc SOHC 20 valve Honda/
Accura G25A1, G25A4 (95-98) Eng.
Accura Vigor, 2.5TL
(TO BE ANNOUNCED)
DBC11855
DBB1102 / 2
DB 58 (5/8")
AUDI (also see VW)
VWA-1*
5 CYL 1978-85 2.0L / 1986cc SOHC Eng.
"
"
"
1978-86 2.1L / 2144cc SOHC Audi/VW KM,
WE Series Eng.
1984-95 2.2L/2226cc SOHC & DOHC JT,
KX, KZ, MC Eng.
1987-92 2.3L / 2309cc SOHC & DOHC
1
2,3
4
1
2,3
4
VWA-1-1(U)
VWA-1-2(U)
VWA-1-4(U)
MZA-2-3(L)
VWA-1-5(L)
VWA-1-3(L)
DB 78 (7/8")
DBC17741
DBC17340
DBC14587
DBB16937 / 1
DBB17340 / 1
DBB13787 / 1
DBB14587 / 1
DB 78 (7/8")
DBC18918
DBC18524
DBC18131
DBC15772
DBB18119 / 1
DBB18524 / 1
DBB18131 / 1
DBB14969 / 1
DB 78 (7/8")
DBC18918
DBB18119 / 1
DB 78 (7/8")
DBC18524
DBB18524 / 1
DBC18131
DBB18131 / 1
DBC15772
DBB14969 / 1
DBC18918
DBC18524
DBC18131
DBC14587
DBB18119 / 1
DBB18524 / 1
DBB18131 / 1
DBB13788 / 1
BMW
BMA-4
4 CYL 1977-83 OHC 3 Housing head
casting #1 262 177
6 CYL 1982-87 2.7L / 2693cc OHC M20B27 Series
7 Housing head, 4 Journal cam
"Small Six" casting #1 264 200
"
1987-91 2.7L / 2693cc OHC M20B27 Series
7 Housing head, 7 Journal cam
"Small Six" casting # 1 264 200
"
1976-0N 2.8L / 2788cc OHC M30B28 Series
"
"
"
"
1976-0N
1976-86
1982-93
1978-93
3.0L / 2985cc OHC M30B30 Series
3.5L / 3453cc OHC S38B35 Series
All 4 Housing head, "Big Six"
Casting #1 250 0199 above
1
2
3
BMA-1-8
BMA-1-9
BMA-4-3
BMA-2
1
2
3
4
BMA-1-1
BMA-1-2
BMA-1-3
BMA-1-10
BMA-3
1
2
3
4
5
6
7
BMA-1-1
BMA-1-5
BMA-1-2
BMA-1-6
BMA-1-3
BMA-1-7
BMA-1-10
BMA-1
1
2
3
4
*Denotes half shell bearings
103
BMA-1-1
BMA-1-2
BMA-1-3
BMA-1-4
DB 78 (7/8")
OHC
DBB12599 / 1
DBB11815 / 2
DBC13439
DBC12655
MAKE/MODEL(S)
ENGINE
CYL YEAR(S)
CAM BRG SET
POSITION
COMPONENTS
TOOLS
CUTTER
BUSH/QTY REQ
BAR
DBC18918
DBB18118/ 2
DB 78 (7/8")
DBC14225
DBB13385 / 2
DB 78 (7/8")
DBC14971
DBB13385 / 2
DB 78 (7/8")
CHRYSLER (also see Mitsubishi)
MIA-3
4 CYL 1979-84 1.4L / 1410cc SOHC G12B Mitsubishi
"
Eng. Dodge Colt, Plymouth Champ
1985-96 1.5L / 1468cc SOHC G15B, 4G15
Mitsubishi Eng. Dodge Colt, Premier
"
1978-89 1.6L / 1597cc SOHC G32B, F, Z, 3
Mitsubishi Eng. Dodge Challenger,
Colt, Premier, Sapporo
1,2,3
MIA-1*
1
2,3,4,5
1,2,3,4,5
MIA-1-3(U)
MIA-1-1(U)
MIA-1-4(L)
1
2,3,4,5
1,2,3,4,5
MIA-1-7(U)
MIA-1-5(U)
MIA-1-6(L)
MIA-2*
1.6L / 1597cc SOHC G32B, F, Z, 3
Heavy Wall .020 o'size HSG O.D. +.074
"
"
OHC
1
2
3
4
5
1,2,3,4,5
1,2,3,4,5
PDA-1-2(U)
PDA-1-1(L)
1,2,3,4,5
1,2,3,4,5
PDA-2-2(U)
PDA-2-1(L)
"
1
2,3,4,5
1,2,3,4,5
MIA-1-3(U)
MIA-1-1(U)
MIA-1-4(L)
1
2,3,4,5
1,2,3,4,5
MIA-1-7(U)
MIA-1-5(U)
MIA-1-6(L)
"
1,2,3,4,5
1,2,3,4,5
PDA-1-2(U)
PDA-1-1(L)
1,2,3,4,5
1,2,3,4,5
PDA-2-2(U)
PDA-2-1(L)
"
1
2,3,4,5
1,2,3,4,5
MIA-1-3(U)
MIA-1-1(U)
MIA-1-4(L)
1
2,3,4,5
1,2,3,4,5
MIA-1-7(U)
MIA-1-5(U)
MIA-1-6(L)
DB 78 (7/8")
DBC14225
DBB13385 / 2
DB 78 (7/8")
DBC14971
DBB13385 / 2
DB 78 (7/8")
DBC14819
DBB13779 / 2
DB 78 (7/8")
DBC14819
DBB13979 / 2
DB 78 (7/8")
DBC14225
DBB13385 / 2
DB 78 (7/8")
DBC14971
DBB13385 / 2
DB 78 (7/8")
MIA-2*
2.6L / 2555cc SOHC G54B - F, W Series
Mitsubishi Eng.
DBB13979 / 2
MIA-1*
1978-92 2.6L / 2555cc SOHC G54B - F, W Series
Mitsubishi Eng. Arrow, Charger,
Challenger, Colt, Sapporo, D-50
Truck
DBC14819
PDA-2*
2.5L / 2507cc SOHC Chrysler Eng.
.020 o'size journal
DB 78 (7/8")
PDA-1*
1981-96 2.5L / 2507cc SOHC Series A, B, C, D, E,
F, J, K, 8 Chrysler Eng. Dodge Chrysler,
Plymouth Passenger Cars
DBB13779 / 2
MIA-2*
2.4L / 2351cc SOHC G64B, 4G64
T Series Mitsubishi Eng.
DBC14819
MIA-1*
1989-98 2.4L / 2351cc SOHC G64B, 4G64
T Series Mitsubishi Eng. Dodge
Truck, Summit, Vista
(LINE BORE MACHINING REQUIRED)
PDA-2*
2.2L / 2213cc SOHC Chrysler Eng.
.020 o'size journal
PDA-3-1
PDA-3-2
PDA-3-3
PDA-3-4
PDA-3-5
PDA-1*
1981-94 2.2L / 2213cc Series A, B, C, D, E, F, J, K,
8 SOHC Chrysler Eng. Dodge Chrysler,
Plymouth Passenger Cars
PDA-3
1994-98 2.0L / 1996cc SOHC A588 Series
Eng. Dodge Neon
MIA-3-1
104
MAKE/MODEL(S)
ENGINE
CYL YEAR(S)
CAM BRG SET
POSITION
COMPONENTS
TOOLS
CUTTER
BUSH/QTY REQ
BAR
DBC14225
DBB13385 / 2
DB 78 (7/8")
DBC17931
DBB17131 / 2
DB 78 (7/8")
DBC18435
DBC18535
DBC18635
DBC18735
DBC18835
DBB22055 / 1
DBB1792 / 1
DBB1883 / 1
DB 78 (7/8")
DBC17931
DBB17131 / 2
DB 78 (7/8")
DBC19035
DBC18985
DBC18935
DBC18885
DBC18835
DBB18870 / 1
DBB18020 / 1
DBB22055 / 1
DB 78 (7/8")
DBC13439
DBB12599 / 2
DB 78 (7/8")
DBC19309
DBC17538
DBB18509 / 2
DBB16737 / 1
DB 78 (7/8")
DBC19702
DBC19309
DBC17538
DBB18903 / 1
DBB18509 / 2
DBB16737 / 1
DB 78 (7/8")
DBC11474
DBB1063 / 2
DB 58 (5/8")
CHRYSLER (CONT'D)
MIA-5*
6 CYL 1987-99 3.0L / 2972cc SOHC & DOHC 6G72 and
6G72-T (Turbo) Mitsubishi V-6 Eng.
Acclaim, Caravan, Dynasty, New Yorker,
Stealth, Voyager
1
2
3
4
1
MIA-5-1(U)
MIA-5-2(U)
MIA-5-3(U)
MIA-5-8(U)
MIA-5-5(L)
EAGLE (See CHRYSLER)
FORD (also see Mazda)
MZA-1
4 CYL 1987-94 1.6L / 1597cc SOHC & DOHC B6-T, E, Z,
ZE, 6, 7 Series Mazda Eng. Ford Passenger
Car & Truck
"
"
"
1
2
3
FA-1
1
2
3
4
5
1,5
2,3,4
1,2,3,4,5
1,2,3
4
NIA-2-1
NIA-3-2
NIA-3R
(Cam brg set, right bank)
1
2,3,4
5
NIA-3-1
NIA-2-1
NIA-3-2
FA-3*
8 CYL 1991-99 4.6L / 4605cc SOHC V-8 (1 set per head reqd)
Modular Triton Eng. Ford, Mercury
Car & Truck
MZA-2-3(U)
MZA-2-1(U)
MZA-2-2(L)
NIA-3L
6 CYL 1993-98 3.0L / 2960cc SOHC V-6 VG30E
Nissan/Ford Eng. Ford Truck & Van
(Cam brg set, left bank)
FA-1-1
FA-1-2
FA-1-3
FA-1-4
FA-1-5
MZA-2*
1993-97 2.0L / 1991cc DOHC Mazda A, FSDE Series Eng. Ford Probe
1984-88 2.0L / 1998cc SOHC 8 valve Mazda
Ford FE, FE-T Series Eng incl.
Turbo. Ford Escort, Tempo, Topaz
1989-92 2.2L / 2184cc SOHC 12 valve Mazda
Ford F2, F2-T Series Eng. incl.
Turbo. Ford Probe
MZA-1-1
MZA-1-2
MZA-1-3
1-6
1-6
105
FA-3-1 (L)
FA-3-2(U)
OHC
"
DBB18025 / 1
MZA-1
1985-96 1.9L SOHC Ford J, 9 Series Eng.
Ford Escort, EXP; Mercury Lynx,
Tracer
FA-2-1
FA-2-2
FA-2-3
FA-2-4
FA-2-5
"
1
2
3
4
5
1991-96 1.8L / 1839cc DOHC Mazda BP
Series Eng. Ford Escort, Tracer
& Lt. Truck
MZA-1-1
MZA-1-2
MZA-1-3
FA-2
1981-85 1.6L / 1599cc SOHC Ford HS Series
Eng. Ford Escort, EXP, LN7,
Mercury Lynx
"
1
2
3
MAKE/MODEL(S)
ENGINE
CYL YEAR(S)
CAM BRG SET
POSITION
COMPONENTS
1,6,7,12
2,3,4,5
8,9,10,11
1,6,7,12
2,3,4,5,8,
9,10,11
FA-3-2(L)
FA-4-1(L)
FA-4-2(L)
FA-4-3(U)
FA-4-4(U)
1,6,7,12
2,3,4,5
8,9,10,11
1,6,7,12
2,3,4,5,8,
9,10,11
FA-5-1(L)
FA-4-1(L)
FA-4-2(L)
FA-4-3(U)
FA-4-4(U)
TOOLS
CUTTER
BUSH/QTY REQ
BAR
DBC11474
DBB1063 / 2
DB 58 (5/8")
DBC11474
DBB1063 / 2
DB 58 (5/8")
FORD (CONT'D)
FA-4*
8 CYL 1993-96 4.6L / 4605cc DOHC V-8 (1 set per head reqd)
Car & Truck
"
1996-00 4.6L / 4605cc DOHC V-8 (1 set per head reqd)
"
Car & Truck
1997-01 5.4L / 330ci SOHC 16 valve (1 set per
head reqd) V-8 Modular Triton Eng.
Ford, Mercury Car & Truck
FA-5*
GENERAL MOTORS (also see Isuzu, Saturn)
SA-1
4 CYL 1992-00 1.3L / 1324cc SOHC Suzuki G13A,
OHC
B, K Eng. 1.3L Type 9 Chevrolet
& Geo Metro Passenger Cars
"
1
2
3
4
5
1
2,3,4,5
1,2,3,4,5
MIA-1-3(U)
MIA-1-1(U)
MIA-1-4(L)
1
2,3,4,5
1,2,3,4,5
MIA-1-7(U)
MIA-1-5(U)
MIA-1-6(L)
"
"
"
1
2,3,4,5
GMA-2-1(U)
GMA-2-3(U)
1
2,3,4,5
1,2,3,4,5
MIA-1-3(U)
MIA-1-1(U)
MIA-1-4(L)
DBC14971
DBB13385 / 2
DB 78 (7/8")
1
2,3,4,5
1,2,3,4,5
MIA-1-7(U)
MIA-1-5(U)
MIA-1-6(L)
DBC12655
DBB11415 / 2
DB 78 (7/8")
DBC14225
DBB13385 / 2
DB 78 (7/8")
DBC14971
DBB13385 / 2
DB 78 (7/8")
GMA-2-2(L)
GMA-2-1(L)
MIA-1*
MIA-2*
for above
GMA-1-1
GMA-1-2
1,6
2,3,4,5,7,8,
9,10
1,6
2,3,4,5,7,8,
9,10
1982-86 1.9L / 1949cc SO0HC Isuzu Type A
Eng. Chevrolet S-10 Truck.
DB 78 (7/8")
GMA-2*
1991-00 1.9L / 1901cc DOHC 16 valve Vin
Type 7, 8 Saturn LKO Eng. Saturn
DBB13385 / 2
GMA-1
1991-99 1.9L / 1901cc SOHC Vin Type 9
Saturn LKO Eng. Saturn SC, SL,
SW Passenger Cars
DBC14225
MIA-2*
Heavy Wall .020 o'size HSG O.D.
for above
MIA-1*
1972-82 1.8L / 1817cc SOHC Isuzu G180Z, N
Eng. Series 1 to 4. Chevrolet LUV
Truck
SA-1-1
SA-1-2
SA-1-3
SA-1-4
SA-1-5
106
MAKE/MODEL(S)
ENGINE
CYL YEAR(S)
CAM BRG SET
POSITION
COMPONENTS
TOOLS
CUTTER
BUSH/QTY REQ
BAR
DBC12655
DBB11415 /2
DB 78 (7/8")
DBC11855
DBB1102 / 2
DB 58 (5/8")
DBC12655
DBB11415 /2
DB 78 (7/8")
DBC12655
DBB11415 / 2
DB 78 (7/8")
DBC11855
DBB1102 / 2
DB 58 (5/8")
DBC18918
DBB18118 / 2
DB 78 (7/8")
DBC14225
DBB13385 / 2
DB 78 (7/8")
DBC14971
DBB13385 / 2
DB 78 (7/8")
DBC14225
DBB13385 / 2
DB 78 (7/8")
DBC14971
DBB13385 / 2
DB 78 (7/8")
HONDA (also see ACURA)
HA-2*
4 CYL 1984-89 1.3L / 1342cc SOHC 16 valve Honda
"
D13A2, EV, EV1 Eng. Civic, CRX,
CRX HF (High Fuel)
1984-89 1.5L / 1488cc SOHC Honda EW1
Series Eng. Civic, Civic CRX,
HF (High Fuel), Si
"
1988-91 1.5L/1493cc SOHC 16 valve Honda
D15B1, B2, B6, B7 Series Eng.
Civic 1500, Civic CRX DX, HF (High
Fuel), Si, del Sol (1.100" cam
diameter)
"
1
2,4,5
3
6
1
2,3,4,5,6
HA-1-2(U)
HA-1-4(U)
HA-1-4A(U)
HA-1-5(U)
HA-1-3(L)
HA-1-5(L)
1
2,3,4,5,6
1
2,3,4,5,6
HA-3-2(U)
HA-3-4(U)
HA-3-1(L)
HA-3-3(L)
1
2,3,4,5
1
2,3,4,5
HA-4-1(U)
HA-4-3(U)
HA-4-2(L)
HA-4-4(L)
1-5
1-5
HA-1-1(U)
HA-1-5(L)
1
2,3,4,5,6
1
2,3,4,5,6
HA-3-2(U)
HA-3-4(U)
HA-3-1(L)
HA-3-3(L)
HA-3*
HA-4*
1992-95 1.6L/1590cc SOHC VTEC Honda
D16Z6 Series Eng. Civic EX
"
A18A1, ES-ET, ET2 Series Eng.
Accord DX, LX, S, Sei, Prelude
1983-89 2.0L / 1955cc SOHC Honda A20A,
A20A1, A20A3, BS1, BS2, BT1,
BT2 Eng. Accord DX, LX, SEi
"
1990-97 2.2L / 2156cc SOHC Honda F22A,
F22A1 & VTEC F22B1, F22B2,
F22B6 Eng. Accord DX, LX, SE,
Prelude, Prelude S (1.100" cam
diameter)
HA-1*
HA-3*
HYUNDAI
MIA-3
4 CYL 1985-94 1.5L 1468cc SOHC 8 valve
Mitsubishi G15B, G4AJ, DJ, 4G15
Eng. Hyundai Excel, Scoupe
"
1,2,3
MIA-1*
1985-90 1.6L / 1597cc SOHC 8 valve
Mitsubishi G32B Eng. Hyundai
Excel, Pony, Scoupe, Stellar
1
2,3,4,5
1,2,3,4,5
MIA-1-3(U)
MIA-1-1(U)
MIA-1-4(L)
1
2,3,4,5
1,2,3,4,5
MIA-1-7(U)
MIA-1-5(U)
MIA-1-6(L)
1
2,3,4,5
1,2,3,4,5
MIA-1-3(U)
MIA-1-1(U)
MIA-1-4(L)
1
2,3,4,5
1,2,3,4,5
MIA-1-7(U)
MIA-1-5(U)
MIA-1-6(L)
MIA-2*
for above
"
MIA-1*
1989-91 2.4L/2351cc SOHC 8 valve Mitsubishi
G64B, G4CS Eng. Hyundai Sonata
MIA-2*
for above
MIA-3-1
107
OHC
1983-90 1.8L / 1829cc SOHC Honda A18A,
"
MAKE/MODEL(S)
ENGINE
CYL YEAR(S)
CAM BRG SET
POSITION
COMPONENTS
TOOLS
CUTTER
BUSH/QTY REQ
BAR
DBC19309
DBC17538
DBB18509 / 2
DBB16737 / 1
DB 78 (7/8")
DBC19702
DBC19309
DBC17538
DBB18903 / 1
DBB18509 / 2
DBB16737 / 1
DB 78 (7/8")
DBC14225
DBB13385 / 2
DB 78 (7/8")
DBC14971
DBB13385 / 2
DB 78 (7/8")
DBC17931
DBB17131 / 2
DB 78 (7/8")
DBC13439
DBB12599 / 2
DB 78 (7/8")
DBC17931
DBB17131 / 2
DB 78 (7/8")
DBC13439
DBB12599 / 2
DB 78 (7/8")
DBC17931
DBB17131 / 2
DB 78 (7/8")
DBC13439
DBB12599 / 2
DB 78 (7/8")
INFINITI (Also See Nissan)
NIA-3L
6 CYL 1990-93 3.0L/2960cc SOHC VG30E Nissan/
Infiniti Eng.
Infiniti M30
1,2,3
4
NIA-2-1
NIA-3-2
NIA-3R
1
2,3,4
5
NIA-3-1
NIA-2-1
NIA-3-2
ISUZU (also see GM)
MIA-1*
4 CYL 1969-88 1.8L /1817cc SOHC G180 Series
"
"
"
Eng. Isuzu I-Mark, Pick-up
1979-89 2.0L/1949cc SOHC G200 Series
Eng. Isuzu Impulse, P.U., Trooper
1985-95 2.3L/2254cc SOHC 4ZD1 LW3 Eng.
Isuzu Impulse, P.U., Amigo, Trooper II
1988-97 2.6L/2559cc SOHC 4ZE1, RLJ Eng.
Isuzu P.U., Amigo, Rodeo, Trooper II
1
2,3,4,5
1,2,3,4,5
MIA-1-3(U)
MIA-1-1(U)
MIA-1-4(L)
1
2,3,4,5
1,2,3,4,5
MIA-1-7(U)
MIA-1-5(U)
MIA-1-6(L)
MIA-2*
OHC
for above
MAZDA (also see Ford)
MZA-1
4 CYL 1990-92 1.3L/1290cc DOHC Mazda BJ Eng.
Mazda Passenger Cars (1 set per cam)
"
"
"
1990-94 1.8L/1839cc SOHC Mazda BP, BP012 Eng.
"
Mazda Protégé DX, SE, LX/4WD
1992-94 1.8L/1844cc DOHC Mazda K8 Eng.
Mazda MX-3 GS (1 set per cam)
"
1983-88 2.0L/1998cc SOHC Mazda FE Series
Eng. Mazda 626, B2000 Truck
1983-93 2.2L/2184cc SOHC Mazda F2 Series
Eng. Mazda MX-6, 626, B2200,
B2200i Truck
MZA-2-3(U)
MZA-2-1(U)
MZA-2-2(L)
MZA-1
1
2
3
MZA-1-1
MZA-1-2
MZA-1-3
MZA-2*
1982-89 1.8L/1789cc SOHC Mazda F8 Eng.
Mazda Passenger Cars
"
1,5
2,3,4
1,2,3,4,5
1986-94 1.6L/1597cc SOHC Mazda B6 Eng.
Mazda MX-3, 323, 323SE
MZA-1-1
MZA-1-2
MZA-1-3
MZA-2*
1982-88 1.6L/1587cc SOHC Mazda F6 Eng.
Mazda Passenger Cars
"
1
2
3
1,5
2,3,4
1,2,3,4,5
MZA-2-3(U)
MZA-2-1(U)
MZA-2-2(L)
MZA-1
1
2
3
MZA-1-1
MZA-1-2
MZA-1-3
MZA-2*
1,5
2,3,4
1,2,3,4,5
108
MZA-2-3(U)
MZA-2-1(U)
MZA-2-2(L)
MAKE/MODEL(S)
ENGINE
CYL YEAR(S)
CAM BRG SET
POSITION
COMPONENTS
TOOLS
CUTTER
BUSH/QTY REQ
BAR
DBC14225
DBB13385 / 2
DB 78 (7/8")
DBC14971
DBB13385 / 2
DB 78 (7/8")
DBC12655
DBB11815 / 2
DB 78 (7/8")
DBC18918
DBB18118 / 2
DB 78 (7/8")
DBC14225
DBB13385 / 2
DB 78 (7/8")
DBC14971
DBB13385 / 2
DB 78 (7/8")
DBC14225
DBB13385 / 2
DB 78 (7/8")
DBC14225
DBB13385 / 2
DB 78 (7/8")
DBC14971
DBB13385 / 2
DB 78 (7/8")
MAZDA (CONT'D)
MIA-1*
4 CYL 1987-90 2.6L/2555cc SOHC Mitsubishi G54B
Eng. Mazda B2600 Truck
"
MIA-1-3(U)
MIA-1-1(U)
MIA-1-4(L)
1
2,3,4,5
1,2,3,4,5
MIA-1-7(U)
MIA-1-5(U)
MIA-1-6(L)
1,2,3,4,5
1,2,3,4,5
MZA-4-1(U)
VHA-1-2(L)
MIA-2*
for above
"
1
2,3,4,5
1,2,3,4,5
MZA-4*
1989-95 2.6L/2606cc SOHC Mazda 12 valve
G6, G60 Series Eng. Mazda MPV
Mazda Truck: B2600, B2600i, MPV
Van
MITSUBISHI (also see Chrysler)
MIA-3
4 CYL 1984-88 1.2L/1198cc SOHC Mitsubishi G16B,
1983-88
"
1984-88
"
1983-88
"
1984-96
"
1971-89 1.6L/1597cc SOHC Mitsubishi G32B,
"
4G32 & 4G32T, G32B-T Eng.
Mitsubishi Mirage, Precis
4G62 & 4G62T, G62B-T(Turbo) Eng.
Mitsubishi Cordia, Tredia
MIA-1*
1
2,3,4,5
1,2,3,4,5
MIA-1-3(U)
MIA-1-1(U)
MIA-1-4(L)
1
2,3,4,5
1,2,3,4,5
MIA-1-7(U)
MIA-1-5(U)
MIA-1-6(L)
1,5
2,3,4
1,2,3,4,5
MIA-1-8(U)
MIA-1-1(U)
MIA-1-4(L)
1
2,3,4,5
1,2,3,4,5
MIA-1-3(U)
MIA-1-1(U)
MIA-1-4(L)
1
2,3,4,5
1,2,3,4,5
MIA-1-7(U)
MIA-1-5(U)
MIA-1-6(L)
MIA-2*
1.6L, 1.8L Eng. Heavy wall .020 o'size HSG
O.D. +.074 see applications above
"
"
"
MIA-4*
4G52 Eng. Mitsubishi Passenger Cars
MIA-1*
1985-99 2.4L/2351cc SOHC 8 valve Mitsubishi
G64B, 4G64 Eng. Mitsubishi Expo,
Galant, Space Wagon. Mitsubishi
Truck: Van, Mighty Max, Montero S,
Wagon
1978-92 2.6L/2555cc SOHC Carb & F.I.
Mitsubishi G54B, 4G54 Series Eng.
Mitsubishi Starion, Truck: Montero,
S, SP, SPX
MIA-2*
2.4L, 2.6L Eng. Heavy wall .020 o'size HSG
O.D. +.074 see applications above
MIA-3-1
109
OHC
"
1,2,3
4G16 Eng. Mitsubishi Passenger
1.2L/1244cc Mitsubishi G11B, 4G11
Eng. Mitsubishi Passenger Cars
1.3L/1298cc SOHC Mitsubishi G13B,
1.4L/1410cc SOHC Mitsubishi G12B,
1.5L/1468cc SOHC 8 valve Mitsubishi
G4AJ, G4DJ, G15B, 4G15 Eng.
Mitsubishi Mirage, Precis
MAKE/MODEL(S)
ENGINE
CYL YEAR(S)
CAM BRG SET
POSITION
COMPONENTS
TOOLS
CUTTER
BUSH/QTY REQ
BAR
DBC14225
DBB13385 / 2
DB 78 (7/8")
DBC17340
DBB16540 / 2
DB 78 (7/8")
DBC17340
DBB16540 / 2
DB 78 (7/8")
DBC18914
DBB18113 / 2
DB 78 (7/8")
DBC13841
DBB13001 / 2
DB 78 (7/8")
DBC18914
DBB18113 / 2
DB 78 (7/8")
DBC13841
DBB13001 / 2
DB 78 (7/8")
DBC19309
DBC17538
DBB18509 / 2
DBB16737 / 1
DB 78 (7/8")
DBC19702
DBC19309
DBC17538
DBB18903 / 1
DBB18509 / 2
DBB16737 / 1
DB 78 (7/8")
MITSUBISHI (CONT'D)
MIA-5*
6 CYL 1987-96 3.0L/2972cc SOHC V6 Mitsubishi
6G72, 6G72T (Turbo) Eng.
Mitsubishi Diamante, Galant Sigma,
300GT Mitsubishi Truck: Mighty
Max, Montero S, Sport, SP, SPX
(1 cam set per cyl. head reqd)
1
2
3
4
1
2
3
4
MIA-5-1(U)
MIA-5-2(U)
MIA-5-3(U)
MIA-5-8(U)
MIA-5-5(L)
MIA-5-6(L)
MIA-5-7(L)
MIA-5-9(L)
NISSAN (includes Infiniti)
NIA-4
4 CYL 1981-90 1.3L/1270cc SOHC Nissan E13 Eng.
"
"
Nissan 1300
1979-88 1.5L/1487cc SOHC Nissan E15,
E15ET (Turbo) Eng. Nissan/Datsun
Pulsar, Sentra
1982-88 1.6L/1597cc SOHC 8 valve E16, E16i,
1,2,4
3
5
NIA-1-1
NIA-1-2
NIA-1-3
E16S, E16SPi Eng. Nissan/Datsun
Pulsar, Sentra
"
OHC
Eng. Nissan/Datsun Pulsar, Sentra
"
"
"
CA18E, CA18ET (Turbo) Eng.
1988-90 1.8L/1809cc DOHC 16 valve Nissan
CA18D, CA18DE Eng. Nissan Pulsar,
SE, 200SX (1 cam set per cyl. head reqd)
"
TOA-1-1(U)
TOA-1-2(L)
NIA-5
1,2,3,5
4
NIA-4-1
NIAI-4-2
NIA-6*
1980-89 2.2L/2187cc SOHC Z22, Z22E, S
1,2,3,4,5
1,2,3,4,5
TOA-1-1(U)
TOA-1-2(L)
NIA-3L
6 CYL 1987-98 3.0L/2960cc SOHC & DOHC V-6
Nissan VG30D, VG30E, VG30DE
& VG30DT, VG30DET (Turbo) Eng.
Nissan Maxima, 200SX, 300ZX,
Truck: D21, Hardbody, Pathfinder,
Quest, 720 (Cam brgs for left bank)
NIA-4-1
NIA-4-2
NIA-6*
1,2,3,4,5
1,2,3,4,5
1982-90 2.0L/1974cc SOHC Nissan/Datsun
Eng. Nissan 200SX, 720
1980-89 2.4L/2389cc SOHC 8 valve Z24, Z24i,
Z24S Eng. Nissan Truck-Van: D21
P.U., Hardbody, Pathfinder720
NIA-1-1
NIA-5
1,2,3,5
4
1979-89 2.0L/1952cc SOHC Nissan/Datsun
CA20E, CA20S Series Eng.
"
1,2,3,4,5
1982-90 1.8L/1809cc SOHC Nissan CA18,
Z20, Z20E, Z20S Series Eng.
Nissan/Datsun Passenger Cars/Truck.
"
NIA-1
1989-90 1.6L/1597cc SOHC 12 valve GA16i
1,2,3
4
NIA-2-1
NIA-3-2
NIA-3R
1
2,3,4
5
110
NIA-3-1
NIA-2-1
NIA-3-2
MAKE/MODEL(S)
ENGINE
CYL YEAR(S)
CAM BRG SET
POSITION
COMPONENTS
TOOLS
CUTTER
BUSH/QTY REQ
BAR
DBC19309
DBB18509 / 2
DB 78 (7/8")
DBC19309
DBB18509 / 2
DB 78 (7/8")
NISSAN (CONT'D)
NIA-2L
6 CYL 1984-86 3.0L/2960cc SOHC V-6 Nissan
VG30, VG30T (Turbo) Eng. Nissan
Maxima, 300ZX, Truck: D21, Hardbody,
Pathfinder, 720 (Cam brgs for left bank)
1,2,3,4
NIA-2-1
NIA-2R
1,2,3,4,5
NIA-2-1
SATURN (also see GM)
GMA-1
4 CYL 1991-99 1.9L / 1901cc SOHC Vin Type 9
Saturn LKO Eng. Saturn SC, SL,
SW Passenger Cars
"
1
2,3,4,5
GMA-2*
1991-00 1.9L / 1901cc DOHC 16 valve Vin
Type 7, 8 Saturn LKO Eng. Saturn
GMA-1-1
GMA-1-2
1,6
2,3,4,5,7,8,
9,10
1,6
2,3,4,5,7,8,
9,10
GMA-2-1(U)
GMA-2-3(U)
DBC12655
DBB11415 / 2
DB 78 (7/8")
GMA-2-2(L)
GMA-2-1(L)
SUBARU
1
2
3
4
5
SA-1-1
SA-1-2
SA-1-3
SA-1-4
SA-1-5
SUZUKI
SA-1
4 CYL 1985-99 1.3L/1324cc SOHC SOHC Subaru
G13A Eng. Suzuki Samurai,
Sidekick, Swift GA, GLX, GS
1
2
3
4
5
SA-1-1
SA-1-2
SA-1-3
SA-1-4
SA-1-5
TOYOTA
TOA-1*
4 CYL 1974-80 2.2L/2189cc SOHC Toyota 20R Eng.
"
Toyota Celica, Corona, Hi-Lux P.U.
1979-95 2.4L/2366cc SOHC Toyota 22R, RE,
REC Series Eng. Toyota Celica,
Corona, Hi-Lux P.U., 4-Runner
1,2,3
1,2,3
TOA-2-2(U)
TOA-2-1(L)
DBC13841
DBB13001 / 2
DB 78 (7/8")
DBC11085
DBB10225 / 2
DB 58 (5/8")
VOLKSWAGEN (includes Audi)
VWA-2*
4 CYL 1982-94 1.8L/1780cc SOHC VW ABG, GX,
HT, JH, JN, PF, PG, RD, RV Series
068 2H Eng. VW Cabriolet, Corrado,
Fox, Golf, Jetta, Quantum, Rabbitt,
Scirocco
1,2,3,4,5
1,2,3,4,5
111
VWA-2-1(L)
VWA-2-2(U)
OHC
G13A Eng.
SA-1
4 CYL 1985-99 1.3L/1324cc SOHC SOHC Subaru
CYL YEAR(S)
MAKE/MODEL(S)
ENGINE
CAM BRG SET
POSITION
COMPONENTS
TOOLS
CUTTER
BUSH/QTY REQ
BAR
DBC13439
DBC12655
DBB12599 / 1
DBB11815 / 2
DB 78 (7/8")
DBC12655
DBB11815 / 2
DB 78 (7/8")
VOLKSWAGEN (CONT'D)
VWA-1*
5 CYL 1978-86 2.1L/2144cc SOHC Audi/VW KM,
"
WE Series Eng. VW Quantum
1984-96 2.2L/2226cc SOHC & DOHC JT,
KX, KZ, MC Eng. VW Quantum,
Quantum Syncro
1
2,3
4
1
2,3
4
VWA-1-1(U)
VWA-1-2(U)
VWA-1-4(U)
MZA-2-3(L)
VWA-1-5(L)
VWA-1-3(L)
1,2,3,4,5
1,2,3,4,5
VHA-1-2(U)
VOA-1-1(L)
VOLVO
VOA-1*
4 CYL 1974-85 2.1L/2127cc SOHC Volvo B21F,
OHC
"
B21FT-(Turbo) Eng.
Volvo DL, GL, GLT, GT, 240, 240DL,
240GL, 242, 244, 245
1981-96 2.3L/2316cc SOHC Volvo B23E,
B23F, B23FT-Turbo, B230F, B230FTTurbo Eng. Volvo Coupe, DL, GL,
GT, 240
112
ALUMINUM OVERHEAD CAM (OHC)
ACCESSORIES
DURA-BOND QUICK BORE BARS, CUTTERS, AND BUSHINGS
SET NO.
UNDERSIZE
BMA-1
TOOLS
ENGINE MFG.
BMW
BMA-1-1
BMA-1-2
BMA-1-3
BMA-1-10
1
2
3
4
DBC18918
DBC18524
DBC18131
DBC15772
DBB18119 / 1
DBB18524 / 1
DBB18131 / 1
DBB14969 / 1
DB 78 (7/8")
BMW
BMA-1-1
BMA-1-5
BMA-1-2
BMA-1-6
BMA-1-3
BMA-1-7
BMA-1-10
1
2
3
4
5
6
7
DBC18918
DBB18119 / 1
DB 78 (7/8")
DBC18524
DBB18524 / 1
DBC18131
DBB18131 / 1
DBC15772
DBB14969 / 1
BMW
BMA-1-8
BMA-1-9
BMA-4-3
1
2
3
DBC17741
DBC17340
DBC14587
DBB16937 / 1
DBB17340 / 1
DBB13787 / 1
DBB14587 / 1
DB 78 (7/8")
FORD
FA-1-1
FA-1-2
FA-1-3
FA-1-4
FA-1-5
1
2
3
4
5
DBC19035
DBC18985
DBC18935
DBC18885
DBC18835
DBB18870 / 1
DBB18020 / 1
DBB22055 / 1
DB 78 (7/8")
FORD
FA-2-1
FA-2-2
FA-2-3
FA-2-4
FA-2-5
1
2
3
4
5
DBC18435
DBC18535
DBC18635
DBC18735
DBC18835
DBB22055 / 1
DBB1792 / 1
DBB1883 / 1
DB 78 (7/8")
DBB18025 / 1
FORD
FA-3-1 (L)
FA-3-2 (U)
1-6
1-6
DBC11474
DBB1063 / 2
DB 58 (5/8")
FORD
FA-3-2(L)
FA-4-1(L)
FA-4-2(L)
FA-4-3(U)
FA-4-4(U)
1,6,7,12
2,3,4,5
8,9,10,11
1,6,7,12
2,3,4,5
8,9,10,11
DBC11474
DBB1063 / 2
DB 58 (5/8")
FORD
FA-5-1(L)
FA-4-1(L)
FA-4-2(L)
FA-4-3(U)
FA-4-4(U)
1,6,7,12
2,3,4,5
8,9,10,11
1,6,7,12
2,3,4,5
8,9,10,11
DBC11474
DBB1063 / 2
DB 58 (5/8")
std
FA-3*
.010
FA-4*
std
FA-5*
std
GMA-1
* Denotes half-shell bearings
SATURN SOHC GMA-1-1
GMA-1-2
1
2,3,4,5
113
OHC
DB 78 (7/8")
ACCESSORIES
DBB18119 / 1
DBB18524 / 1
DBB18131 / 1
DBB13788 / 1
std
FA-2
BAR
DBC18918
DBC18524
DBC18131
DBC14587
std
FA-1
BUSH / QTY REQ
1
2
3
4
std
BMA-4
CUTTER
BMA-1-1
BMA-1-2
BMA-1-3
BMA-1-4
std
BMA-3
POSITION
BMW
std
BMA-2
CONTENTS
ACCESSORIES
SET NO.
UNDERSIZE
GMA-2*
TOOLS
ENGINE MFG.
CONTENTS
SATURN DOHC GMA-2-1(U)
GMA-2-3(U)
GMA-2-2(L)
GMA-2-1(L)
HA-1*
BUSH / QTY REQ
BAR
1,6
2,3,4,5,7,8,
9,10
1,6
2,3,4,5,7,8,
9,10
DBC12655
DBB11415 / 2
DB 78 (7/8")
HONDA
ACCORD
PRELUDE
HA-1-1(U)
HA-1-5(L)
1,2,3,4,5
1,2,3,4,5
DBC12655
DBB11415 / 2
DB 78 (7/8")
HA-2*
CIVIC/CRX
HA-1-2(U)
HA-1-4(U)
HA-1-4A(U)
HA-1-5(U)
HA-1-3(L)
HA-1-5(L)
1
2,4,5
3
6
1
2,3,4,5,6
DBC12655
DBB11415 /2
DB 78 (7/8")
HONDA
ACCORD
PRELUDE
HA-3-2(U)
HA-3-4(U)
HA-3-1(L)
HA-3-3(L)
1
2,3,4,5,6
1
2,3,4,5,6
DBC11855
DBB1102 / 2
DB 58 (5/8")
HA-4*
HONDA
CIVIC/CRX
HA-4-1(U)
HA-4-3(U)
HA-4-2(L)
HA-4-4(L)
1
2,3,4,5
1
2,3,4,5
DBC12655
DBB11415 /2
DB 78 (7/8")
HA-5*
ACCURA
HA-5-2(U)
HA-3-4(U)
HA-5-1(L)
HA-3-3(L)
1
2,3,4,5,6,7
1
2,3,4,5,6,7
MITSUBISHI
ISUZU
HYUNDAI
MIA-1-3(U)
MIA-1-1(U)
MIA-1-4(L)
1
2,3,4,5
1,2,3,4,5
DBC14225
DBB13385 / 2
DB 78 (7/8")
MITSUBISHI
ISUZU
HYUNDAI
MIA-1-7(U)
MIA-1-5(U)
MIA-1-6(L)
1
2,3,4,5
1,2,3,4,5
DBC14971
DBB13385 / 2
DB 78 (7/8")
MITSUBISHI
HYUNDAI
MIA-3-1
1,2,3
DBC18918
DBB18118 / 2
DB 78 (7/8")
std
MIA-4*
MITSUBISHI
MIA-1-8(U)
MIA-1-1(U)
MIA-1-4(L)
1,5
2,3,4,
1,2,3,4,5
DBC14225
DBB13385 / 2
DB 78 (7/8")
MITSUBISHI
MIA-5-1(U)
MIA-5-2(U)
MIA-5-3(U)
MIA-5-8(U)
MIA-5-5(L)
MIA-5-6(L)
MIA-5-7(L)
MIA-5-9(L)
1
2
3
4
1
2
3
4
DBC14225
DBB13385 / 2
DB 78 (7/8")
HA-3*
std
OHC
CUTTER
std
.020
ACCESSORIES
POSITION
MIA-1*
.010
.020
MIA-2*
.020
(heavy wall)
MIA-3
std
MIA-5*
std
114
DBC11855
(TO BE ANNOUNCED)
DBB1102 / 2
DB 58 (5/8")
ACCESSORIES
SET NO.
UNDERSIZE
MZA-1
TOOLS
ENGINE MFG.
BUSH / QTY REQ
BAR
1
2
3
DBC17931
DBB17131 / 2
DB 78 (7/8")
MAZDA
MZA-2-3(U)
MZA-2-1(U)
1,5
2,3,4
DBC13439
DBB12599 / 2
DB 78 (7/8")
MAZDA
MZA-4-1(U)
VHA-1-2(L)
1,2,3,4,5
1,2,3,4,5
DBC12655
DBB11815 / 2
DB 78 (7/8")
NISSAN
NIA-1-1
1,2,3,4,5
DBC17340
DBB16540 / 2
DB 78 (7/8")
NISSAN
NIA-2-1
1,2,3,4
DBC19309
DBB18509 / 2
DB 78 (7/8")
NISSAN
NIA-2-1
1,2,3,4,5
DBC19309
DBB18509 / 2
DB 78 (7/8")
NISSAN
NIA-2-1
NIA-3-2
1,2,3
4
DBC19309
DBC17538
DBB18509 / 2
DBB16737 / 1
DB 78 (7/8")
NISSAN
NIA-3-1
NIA-2-1
NIA-3-2
1
2,3,4
5
DBC19702
DBC19309
DBC17538
DBB18903 / 1
DBB18509 / 2
DBB16737 / 1
DB 78 (7/8")
NISSAN
NIA-1-1
NIA-1-2
NIA-1-3
1,2,4
3
5
DBC17340
DBB16540 / 2
DB 78 (7/8")
NISSAN
NIA-4-1
NIA-4-2
1,2,3,5
4
DBC18914
DBB18113 / 2
DB 78 (7/8")
NISSAN
TOA-1-1(U)
TOA-1-2(L)
1,2,3,4,5
1,2,3,4,5
DBC13841
DBB13001 / 2
DB 78 (7/8")
CHRYSLER
PDA-1-2(U)
PDA-1-1(L)
1,2,3,4,5
1,2,3,4,5
DBC14819
DBB13779 / 2
DB 78 (7/8")
CHRYSLER
PDA-2-2(U)
PDA-2-1(L)
1,2,3,4,5
1,2,3,4,5
DBC14819
DBB13979 / 2
DB 78 (7/8")
CHRYSLER
PDA-3-1
PDA-3-2
PDA-3-3
PDA-3-4
PDA-3-5
1
2
3
4
5
SUBURU
SUZUKI
SA-1-1
SA-1-2
SA-1-3
SA-1-4
SA-1-5
1
2
3
4
5
std
NIA-1
CUTTER
MZA-1-1
MZA-1-2
MZA-1-3
.020
MZA-4*
POSITION
MAZDA
.020
MZA-2*
CONTENTS
std
NIA-2L
std
NIA-2R
std
NIA-3L
std
NIA-3R
std
NIA-4
.020
NIA-5
std
PDA-2*
std
PDA-3
std
SA-1
std
115
OHC
PDA-1*
std
ACCESSORIES
NIA-6*
.020
ACCESSORIES
SET NO.
UNDERSIZE
TOA-1*
TOOLS
ENGINE MFG.
VWA-1*
OHC
BUSH / QTY REQ
BAR
1,2,3
1,2,3
DBC13841
DBB13001 / 2
DB 78 (7/8")
VOLVO
VHA-1-2(U)
VOA-1-1(L)
1,2,3,4,5
1,2,3,4,5
DBC12655
DBB11815 / 2
DB 78 (7/8")
AUDI
VWA-1-1(U)
VWA-1-2(U)
VWA-1-4(U)
MZA-2-3(L)
VWA-1-5(L)
VWA-1-3(L)
1
2,3
4
1
2,3
4
DBC13439
DBC12655
DBB12599 / 1
DBB11815 / 2
DB 78 (7/8")
DBC11085
DBB10225 / 2
DB 58 (5/8")
VOLKSWAGEN VWA-2-1(U)
VWA-2-2(L)
1,2,3,4,5
1,2,3,4,5
ACCESSORIES
VWA-2*
CUTTER
TOA-2-2(U)
TOA-2-1(L)
std
std
POSITION
TOYOTA
std
VOA-1*
CONTENTS
116
AUDI•CHRYSLER•FORD•NISSAN•BMW•MITSUBISHI•HONDA•MAZDA•TOYOTA•VOLVO
THE REVOLUTIONARY NEW WAY TO REBUILD ALUMINUM HEADS with the
Dura-Bond® Boring System
O.H.C. Cutter System & Bearings for Aluminum Cylinder Heads
Features: Tapered bushings provide self alignment • No lengthy set up time • Bar is driven by a 1/2”
electric or air drill motor • “No chatter.” Cutters cut and ream to a factory finish in one operation.
Our Quick Bore System enables you to bore a complete cylinder head and install new repair bearings in
approximately 25 minutes rather than 45 minutes or longer required by other systems.
WHY SHOULD I REBUILD ALUMINUM HEADS?
• Approximately 75% of today’s rebuilders have yet to take advantage of this exciting and growing
new market.
• For the first time, there are more aluminum heads than cast cylinder heads
in America’s passenger cars.
• In fact, there are three times more aluminum than cast heads being manufactured
for today’s new passenger cars.
• The demand for aluminum head service is far greater than for cast heads,
•
providing opportunity for head straightening, head surfacing, welding,
and line boring.
Keep your customers by doing it yourself. Find the line bore system below that
best fits your needs…you’ll find it pays for itself in as little as five jobs!
™
C H E
V R O L E T
70% COVERAGE includes
Chrysler•Honda•Isuzu•Mitsubishi•Nissan
QS-1
PACKAGE INCLUDES:
BUSHINGS (Set of 2): DBB11415, DBB13385, DBB16540, DBB13001
CUTTERS (One Each): DBC12655, DBC14225, DBC17340, DBC13841
BAR (One):
DB78 (7/8”)
BEARINGS (One Set of Each Of The Following):
90% COVERAGE includes
Chrysler•Honda•Isuzu•Mazda
Mitsubishi•Nissan•Toyota
QS-2
PACKAGE INCLUDES:
BUSHINGS (Set of 2): DBB11415, DBB13001, DBB13385
DBB16540, DBB17131, DBB18509
CUTTERS (One Each): DBC12655, DBC13841, DBC14225
DBC14971, DBC17340, DBC17931, DBC19309
HA-1, MIA-5, HA-2, NIA-4, MIA-1, NIA-6
BAR (One):
DB78 (7/8”)
BEARINGS (One Set of Each Of The Following):HA-1, HA-2,
* Component substitution available, consult your wholesaler.
NIA-2L, NIA-2R, NIA-6, MIA-1, MIA-2, MIA-5, MIA-4,
MZA-1, TOA-1
3200 Arrowhead Drive • Carson City • NV 89706 • (800) 227-8360 • (775) 883-8998
OHC
By purchasing the QS-1 or QS-2 Package, the bearing sets are FREE!
BEARING SYSTEM
SPECIAL SAVINGS ON Dura-Bond QUICK BORE KITS:
NEW OPPORTUNITIES FOR ALUMINUM HEAD REBUILDING…
DID YOU KNOW:
• That just approximately 20% of today’s’ engine rebuilders perform
aluminum head rebuilding.
• OE and industry aluminum cylinder head/engine block production is expanding
at a tremendous rate, approximately 3 to 1 vs. cast iron.
• The need for rebuild service in a typical aluminum head far exceeds
cast iron.
• Aluminum head rebuilds generate more profit per head because they require
more operations than cast iron including: head straightening, surfacing, welding
and align boring.
FUTURE GROWTH is assured with
DURA-BOND’s.. QUICK BORE SYSTEM!
A precision boring system providing housing bore alignment for
oversized cam bearings.
DURA-BOND BEARING COMPANY
O.H.C. CUTTER SYSTEM & BEARING FOR ALUMINUM CYL. HEADS
FIRST BORING PASS
SECOND BORING PASS
RECOMMENDED BUSHING PLACEMENT
IN THIS CONFIGURATION TO BORE
#2, #3, AND #4.
RECOMMENDED BUSHING PLACEMENT IN
THIS CONFIGURATION TO BORE OUTER
HOUSINGS. UTILIZE RING BUSHINGS TO
SUPPORT DRIVE BAR BUSHINGS.
• Cylinder heads that are warped extensively should be straightened before line boring.
OHC
BEARING SYSTEM
• Extra long Drive Bar allows cutting of Multi-Housings.
• Electric drill with 1/2” chuck is used to drive the bar (500 - 600 RPM).
• Tapered bushings (.005 Taper) provide self alignment and eliminate hours of set up time and expensive
fixtures. Use ring bushings around drive bar bushings to mount in bored housings.
• Cutters are designed to cut and ream in one operation. New three angle cutter design requires only
light pressure to feed cutter through bore and because there is no chatter, cutter leaves a factory finish.
• Our system enables a complete cylinder head to be bored and five new bearings installed in under 20
minutes rather than 45 minutes or longer required by other systems.*
• Cutter locks on Drive Bar with two set screws.
• Push cutter through one time. DO NOT REAM TWICE. DO NOT PULL CUTTER BACK
THROUGH FINISHED BORED HOUSING.
• Use a constant flow of penetrating oil when cutting. This is a must to wash away cutting chips and
achieve a finish necessary to install the bearing set.
• If cutter binds or stops in bore loosen the cap, do not reverse cutter rotation, this will cause breakage of
carbide. Lightly work out by hand or tap straight back on bar with mallet.
Refer to our data sheet for bearing, application, cutter, and bushing sizes.
*As tested and time studied at Dura-Bond Bearing Company.
30000 (GOLD) SERIES
VALVE SEAT INSERTS
DESCRIPTION and APPLICATION
Superior Machinability
The 30000 (Gold) series is the newest and most machinable of our valve seat materials. It is a sintered valve seat insert which offers a blend of finely dispersed tungsten carbide residing in a matrix of
tempered tool steel and special alloy iron particles. The superior machinability is the result of adding our
proprietary ingredients and solid dry lubricants to this blend, and by using our special processing techniques during manufacture.
Designed for Unleaded Fuels
This very machinable exhaust seat material is designed for unleaded fuels. The 30000 (Gold) series is
intended for the light to medium duty range. (For the heavy duty or extreme duty range we recommend
our 70000 (Diamond) series valve seat inserts.)
New Powder Metal Technology
Dura-Bond/Snyder has taken full advantage of the new powder metal technology to produce a “hard”
valve seat which will machine almost like cast iron. The greatly enlarged picture (the 4 black squares are
.0015” across) tells the story.
• Powder metal technology allows us to place a special high grade alloy iron (with its natural, tool
lubricating graphite rich properties) within a tempered tool steel matrix.
• Because of our special processing, we are able to get very fine, spheroidalized, tungsten carbide particles
to evenly disperse within the tool steel.
• These sphereoidalized (round shaped) carbides are easier to machine because the tool bit can wedge
in-between, with less cutting force and less friction.
• The smaller these “balls” of carbide, the easier it is on your cutting tool, because it will not be hitting any
big irregular shaped “iceberg chunks” of carbide.
CHEMICAL COMPOSITION
Special alloy iron
(large white area)
Simi steel
(darker outline)
Micro hardness
penetrator
Tool steel matrix
PHYSICAL PROPERTIES
Apparent hardness 20 HRC (approx.)
Micro hardness
20-43 HRC
Tungsten carbides
Thermal expansion 0000075”/F
(small white dots
(at 1000˚ F)
within tool steel
matrix)
Dura-Bond reserves the right to revise composition and specifications without notice.
Valve Seat
3.8
3.5
2.0
1.0
0.9
0.3
0.4
0.3
0.2
0.1
4.5
rem.
General Applications
Tungsten
Molybdenum
Chromium
Vanadium
Carbon
Cobalt
Nickel
Manganese
Silicon
Copper
(proprietary)
Iron
70000 (Diamond) 90000*(Platinum) SERIES
VALVE SEAT INSERTS
Valve Seat
General Applications
DESCRIPTION and APPLICATION
This is a sintered, high speed (tungsten carbide) tool steel, valve seat insert. This material has special
additives blended into the matrix which impart high temperature lubrication properties to the valve seat.
These lubrication properties are “built-in” throughout, and are not affected by extreme heat or machining.
These solid lubricants enable this material to be used in “dry” fuel applications such as propane, LPG, and
natural gas. They prevent the “micro-welding” of the valve seat material to the valve face, therefore eliminating the primary cause of valve seat erosion. They also improve the machinability. Your tools last longer
and you can cut faster.
Because of the special high temperature sintering and post heat treat processing, this valve seat
material has cermet style metal alloy oxides. This gives it superior wear resistance to both pounding and
abrasive wear at elevated temperatures. These** are called “cer-met” style because they are similar to
ceramic (they do not soften at elevated temperature), but retain the machinability of metal. It is this high
tech, new generation processing that allows us to achieve such high, hot hardness without having to put in
massive amounts of expensive alloys, which would be required, to achieve equal performance. Normal
foundry techniques do not allow this type of structure. You get superior wear resistance and high hot
hardness at a very favorable price.
This valve seat insert is, therefore, used in engines using diesel, unleaded gasoline, and propane.
We have been setting new longevity records in propane and natural gas applications using this seat.
The micro structure of this valve seat insert is a very fine evenly dispersed mixture of spheroidal
refractory alloy carbides, cermet style metal alloy oxides and solid lubricant residing in a tempered martensitic matrix.
CHEMICAL COMPOSITION
Tungsten
Molybdenum
Chromium
Vanadium
Carbon
Cobalt
Nickel
Manganese
Silicon
Copper
(proprietary)
Iron
70000
5.3
4.4
3.5
1.5
0.8
0.4
0.3
0.3
0.2
0.1
3.5
rem.
90000*
6.5
6.0
4.0
2.0
0.9
0.4
0.4
0.3
0.2
0.1
3.5
rem.
PHYSICAL PROPERTIES 70000
Apparent hardness
Micro Hardness
Thermal expansion
(at 1000˚ F)
**Metal Alloy Oxides
* 90000 series available for extreme duty applications, special order only.
Dura-Bond reserves the right to revise composition and specifications without notice.
90000*
30 HRC (approx.)
35 HRC (approx.)
25-43 HRC
35-43 HRC
.0000078”/degree F .0000078”/degree F
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
(ENGINE SERIES/MAKE/MODEL)
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
ACURA
L4
1590cc/1.6L
2.953"(75mm) Bore
1986-89 DOHC 16 valve D16A1 Series Eng.
Integra
INT
31616
1.2570
1.000
.305
1.180
1.1945
0.880
.280
1.062
1.3820
1.102/1.160
.260
1.299
1.2559
0.933
.254
1.103
1.3820
1.102/1.160
.260
1.299
1.2559
0.933
.254
1.103
1.3190
1.045
.316
1.217
1.2570
0.930
.325
1.102
1.3820
1.120
.325
1.2570
0.970
.270
1.3800
1.063
.313
1.2570
1.000
.305
1.4440
1.180/1.270
.255
1.339
1.3190
1.020
.258
1.181
2.3820
2.000
.281
2.3820
2.000
.281
1.0045
0.750
..188
.890
1.0045
0.750
..188
.890
1.1811
.866
.335
.890
1.1811
.866
.335
.890
1.5050
1.250
.219
1.438
1.3800
1.125
.188
1.313
1.5050
1.250
.219
1.438
1.3800
1.125
.188
1.313
1.5050
1.250
.219
1.438
1.3800
1.125
.188
1.313
1.6300
1.280
.315
(1250-62)
EXH
31611
(1187-54)
L4
1678cc/1.7L
3.189"(81mm) Bore
1992-93 DOHC EFI 16 valve B17A1 Series V-Tech
Eng. Integra GS-R
INT
30238
(1375-56)
EXH
31105
(1250-58)
L4
1797cc/1.8L
3.189"(81mm) Bore
INT
1994-99 DOHC EFI 16 valve B18C1 Series
V-Tech Eng. Integra GS-R
30238
(1375-56)
EXH
31105
(1250-58)
L4
1834cc/1.8L
3.189"(81mm) Bore
1990-99 DOHC EFI 16 valve B18A1, B18B1 Series
Eng. Integra
INT
30563
(1312-64)
EXH
31612
(1250-63)
L4
2156cc/2.2L
3.346"(81mm) Bore
1997
INT
SOHC F22B1, B2, B6 Series Eng.
31635
(1375-55)
EXH
31613
(1250-64)
1997
INT
SOHC H22A4 Series V-Tech Eng.
30787
(1375-18)
EXH
31616
(1250-62)
V6
3165cc/3.2L
3.60"(93.4mm) Bore
INT
1996-97 SOHC 24 valve 6VD1 Eng.
SLX, Truck
31645
(1437-67)
EXH
31623
(1312-66)
ALLIS - CHALMERS
L4, L6
INT
1921-54 A, E, L, 25-40, 35,54, Patrol WK
EXH
L4
62ci
2.375"Bore
Continental N62, N4062 Series Eng.
Model G
EXH
INT
Alt. Int. w .890 vl. hd., .335 depth
EXH
Alt. Exh. w .890 vl. hd., .335 depth
L4
138ci/2.3L
3.375" Bore
2 Cyl
142ci/2.3L
4.250" Bore
INT
EXH
B, 1B, B&R Power Unit, B15 Tractor
from Serial 64500, C, CA, RC, B125,
60H
G 138 Eng. D10 thru Serial 3501; D12
thru Serial 3001
INT
EXH
INT
EXH
1946-50 HD5, HD5B & HD5G w Detroit Diesel,
prior to 1950
NOTE: See progressive listing for additional 30000/70000 sizes not listed by application.
121
30994
70994
(2375-2)
(2375-2N)
31600
71600
(1000-1)
(1000-1N)
31600
71600
(1000-1)
(1000-1N)
31170
71170
(1181E-1)
(1181E-1N)
31170
71170
(1181E-1)
(1181E-1N)
30711
70711
(1500-1)
(1500-1N)
30790
70790
(1375-4)
(1375-4N)
30711
70711
(1500-1)
(1500-1N)
30790
70790
(1375-4)
(1375-4N)
30711
70711
(1500-1)
(1500-1N)
30790
70790
(1375-4)
(1375-4N)
EXH
31685
71685
ONLY
(1625-58)
(1625-58N)
VALVE SEAT
L4
125ci/2.0L
3.375" Bore
B, 1B, B15 Tractor thru Serial 64500
70994
(2375-2N)
L4
116ci/1.9L
3.250" Bore
INT
30994
(2375-2)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
ALLIS - CHALMERS (CONT'D)
L4
145ci/2.4L
4.438" Bore
L4
149ci/2.4L
3.500" Bore
L4
153ci/2.5L
3.438" Bore
INT
HD6, HD11, TS 169 Scraper
1.750
.281
1.7550
1.438
.313
1.5050
1.250
.219
1.438
1.3800
1.125
.188
1.313
1.5680
1.312
.219
1.438
1.4425
1.219
.219
1.375
1.5050
1.250
.250
1.376
1.4425
1.219
.219
1.376
1.5050
1.250
.219
1.438
1.3800
1.125
.188
1.313
1.5050
1.250
.250
1.375
1.4425
1.219
.219
1.376
1.5670
1.375
.250
1.546
1.4425
1.219
.219
1.375
1.5680
1.312
.250
1.480
1.3800
1.125
.219
1.250
1.6300
1.375
.219
1.6300
1.375
.219
1.7550
1.500
.250
1.687
1.5780
1.313
.250
1.500
1.6300
1.280
.315
1957-73 D17D, D17D LPG Motor Grader from s/n 5424, INT
30659
70659
1.7550
(1750-1)
(1750-1N)
170 Eng. 170G Tractor, G226, G226 Gas
Industrial, G226 LPG Eng.
EXH 30644+10 70644+10 1.5780
1.500
.250
1.687
1.313
.250
1.500
1.5680
1.312
.219
1.438
1.4425
1.219
.219
1.375
1.5050
1.250
.250
1.375
1.4425
1.219
.219
1.376
EXH
G 149 Eng. D10 from Serial 3501; D12
from Serial 3001; D14, D14LPG, D15
thru Serial 9001; H3, H10, H66, H72,
H90, H160 Industrial
1960-73 4G153 Eng. Lift Truck
INT
EXH
INT
EXH
INT
EXH
L4
175ci/2.9L
3.563" Bore
INT
160 Series, G 160 Gas Eng. H160
Industrial
EXH
INT
D 175 Diesel Eng. HD 3, D15D
Before Serial 11950
EXH
INT
Serial 119505 - D05033
EXH
INT
Serial D05033 up
EXH
L4
186ci/3.0L
3.625" Bore
L4
201ci/3.3L
4.000" Bore
71769
(2062-2N)
2.0680
1960-73 HD 153, 4DA153 Eng. D Motor Grader,
WD 45.
L4
160ci/2.6L
3.625" Bore
31769
(2062-2)
Waukesha XA Eng. Hillside-Prairie #3,
10-12" Cut
INT
EXH
INT
1933-67 W Series Eng. - W, WC, WC Patrol,
WD45 (late), WF, W25, W201
30657
70657
(1750-5)
(1750-5N)
30711
70711
(1500-1)
(1500-1N)
30790
70790
(1375-4)
(1375-4N)
30643
70643
(1562-1)
(1562-1N)
31031
71031
(1437-2)
(1437-2N)
30712
70712
(1500-3)
(1500-3N)
31031
71031
(1437-2)
(1437-2N)
30711
70711
(1500-1)
(1500-1N)
30790
70790
(1375-4)
(1375-4N)
30712
70712
(1500-3)
(1500-3N)
31031
71031
(1437-2)
(1437-2N)
31486
71486
(1562-5)
(1562-5N)
31031
71031
(1437-2)
(1437-2N)
30644
70644
(1562-4)
(1562-4N)
30558
70558
(1375-1)
(1375-1N)
30648
70648
(1625-1)
(1625-1N)
30648
70648
(1625-1)
(1625-1N)
30659
70659
(1750-1)
(1750-1N)
EXH 30644+10 70644+10
VALVE SEAT
(1562-4+10)
L3
213ci/3.5L
4.250" Bore
L4
226ci/3.7L
4.000" Bore
1946-50 HD7 & HD7W w Detroit Diesel Eng.,
prior to 1950
EXH
31685
71685
ONLY
(1625-58)
(1625-58N)
(1562-4+10)
L6
230ci/3.8L
3.438" Bore
INT
1960-73 6G230 Eng. Lift Truck
EXH
6D230, 6DA230-D Motor Grader, WD45
INT
EXH
122
(1562-4+10N)
(1562-4+10N)
30643
70643
(1562-1)
(1562-1N)
31031
71031
(1437-2)
(1437-2N)
30712
70712
(1500-3)
(1500-3N)
31031
71031
(1437-2)
(1437-2N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L6
230ci/3.8L
3.438" Bore
L4
236ci/3.9L
3.877" Bore
INT
1956-59 GBD230 Buda Diesel Eng. D17,
D Grader, WD 45
EXH
175 w 4.236 Series Perkins Diesel:
Heads w factory installed seats
INT
INT
Heads w factory installed seats
L6
262ci/4.3L
3.563" Bore
INT
DA262, 6D262, 6DA262 Buda Diesel
Eng. D17D, D19D:
Before Serial 119938
DA262, 6D262, 6DA262 Buda Diesel
Eng. D17D, D19D:
Serial 119938 thru 01681
INT
EXH
INT
EXH
INT
EXH
EXH
INT
G262 Gas Eng.
EXH
L6
265ci/4.3L
3.750" Bore
EXH
71701
(1690E-1N)
31238
30640
70640
(1562-6)
(1562-6N)
31765
31701
71701
(1690E-1)
(1690E-1N)
31238
30640
70640
(1562-6)
(1562-6N)
30712
70712
(1500-3)
(1500-3N)
31031
71031
(1437-2)
(1437-2N)
31486
71486
(1562-5)
(1562-5N)
31031
71031
(1437-2)
(1437-2N)
30644
70644
(1562-4)
(1562-4N)
30558
70558
(1375-1)
(1375-1N)
30643
70643
(1562-1)
(1562-1N)
31031
71031
(1437-2)
(1437-2N)
31679
71679
(1609E-1)
(1609E-1N)
31665
71665
(1486E-1)
(1486E-1N)
31685
71685
(1625-58)
(1625-58N)
1967-73 2800 Series Eng. 180D Tractor
INT
EXH
IU, M, U, UC, UM, UM42, WM, 42, U40PU,
U318 Series Eng.
INT
INT
EXH
123
1.125
.219
2.0180
1.5938
0.281
1.744
1.6900
1.250
.375
1.440
1.8810
1.563
.219
1.744
1.5680
1.250
.219
1.440
2.0180
1.594
0.281
1.744
1.6900
1.250
.375
1.440
1.8810
1.563
.219
1.744
1.5680
1.250
.219
1.440
1.5050
1.250
.250
1.375
1.4425
1.200/1.238
.219
1.376
1.5670
1.375
.250
1.546
1.4425
1.219
.219
1.375
1.5680
1.312
.250
1.480
1.3800
1.125
.219
1.250
1.5680
1.312
.219
1.500
1.4425
1.219
.219
1.375
1.6090
1.400
.250
1.620 30º
1.4910
1.270
.290
1.444 30º
1.6300
1.280
.315
30653
70653
(1750-8)
(1750-8N)
1.7550
1.375
.250
1.620 30º
31665
71665
(1486E-1)
(1486E-1N)
1.4910
1.270
.290
1.444 30º
31679
71679
(1609E-1)
(1609E-1N)
1.6090
1.400
.250
1.620 30º
31665
71665
(1486E-1)
(1486E-1N)
1.4910
1.270
.290
1.444 30º
31774
71774
(2125-10)
(2125-10N)
2.1305
1.750
.281
30919
70919
(1875-9)
(1875-9N)
1.8800
1.500
.250
VALVE SEAT
EXH
ONLY
EXH
L4
318ci/5.2L
4.500" Bore
31701
(1690E-1)
1946-50 HD9, HD10 & HD10W w Detroit Diesel
Eng., prior to 1950
D2800, D2900 Diesel Eng. 180, 185,
190, 190XT, 200, 649T, 7000, 7020
1.3800
L4
284ci/4.7L
4.250" Bore
L6
301ci/4.9L
3.875" Bore
INT
1965-73 G2500 Gas Eng. 190D, 190G
31765
.219
(1875-19)
INT
Serial 01681 up
70558
(1375-1N)
1.375
(2018E-1)
EXH
Universal size inserts for heads w/o
factory installed seats
30558
(1375-1)
1.6300
(1875-19)
EXH
L4
248.2ci/4.2L
3.976" Bore
70648
(1625-1N)
(2018E-1)
EXH
Universal size inserts for heads w/o
factory installed seats
30648
(1625-1)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L4
344ci/5.6L
4.438" Bore
INT
1960-66 6000, 7000 Buda Eng.
EXH
INT
1956-73 HD6 Buda Eng.
EXH
INT
1958-69 HD6B Buda Eng.
EXH
INT
HD344 Buda Diesel Eng.
EXH
L6
426ci/7.0L
4.250" Bore
L6
516ci/8.5L
4.438" Bore
31769
71769
(2062-2)
(2062-2N)
30657
70657
(1750-5)
(1750-5N)
30671
70671
(1812-1)
(1812-1N)
30678
70678
(1687-7)
(1687-7N)
31784
71784
(2187-13)
(2187-13N)
30678
70678
(1687-7)
(1687-7N)
31685
71685
(1625-58)
(1625-58N)
1969-73 D426 Eng. 220 Tractor
INT
D21&D22 Series II, D3400, D3500,
D3750 Diesel Eng. Series 670HI, 670T,
6701, 7030, 7040, 7045, 7050, 7060,
7080, 7580
HD6, HD11, 145 Grader, HD516 Buda Diesel
INT
EXH
INT
EXH
INT
INT
EXH
INT
1960-66 10000,11000 Buda Eng.
EXH
VALVE SEAT
70679
(1687-8N)
EXH
1958-69 HD11B Eng.
30679
(1687-8)
ONLY
EXH
INT
1958-73 HD16, HD21 Series Eng.
EXH
HD16, HD16A, HD16AC, HD21,
HD21AC, 6DC844-Buda Diesel Eng.
INT
EXH
L6
844ci/13.8L
5.250" Bore
70923
(1875-11N)
1946-50 HD14, HD15, HD19 & HD19-4 w Detroit
Diesel Eng., prior to 1950
1956-73 HD11 Series Gas Eng. 145 Grader,
TS160 Scraper
L6
779ci/12.8L
5.250" Bore
30923
(1875-11)
INT
1958-73 HD16, HD21 Series Eng.
EXH
HD16, HD16A, HD16AC, HD21,
HD21AC, 6BC844-Buda Diesel Eng.
INT
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
124124
30672
70672
(1812-5)
(1812-5N)
31724
71724
(1814E-1)
(1814E-1N)
31699
71699
(1670E-1)
(1670E-1N)
31784
71784
(2187-13)
(2187-13N)
30678
70678
(1687-7)
(1687-7N)
31769
71769
(2062-2)
(2062-2N)
30657
70657
(1750-5)
(1750-5N)
30671
70671
(1812-1)
(1812-1N)
30678
70678
(1687-7)
(1687-7N)
30923
70923
(1875-11)
(1875-11N)
30679
70679
(1687-8)
(1687-8N)
31767
71767
(2062-7)
(2062-7N)
30678
70678
(1687-7)
(1687-7N)
30994
70994
(2375-2)
(2375-2N)
31787
71787
(2250-13)
(2250-13N)
31767
71767
(2062-7)
(2062-7N)
30678
70678
(1687-7)
(1687-7N)
30994
70994
(2375-2)
(2375-2N)
31787
71787
(2250-13)
(2250-13N)
1.8800
1.5625
.313
1.6920
1.375
.313
2.0680
1.750
.281
1.7550
1.438
.313
1.8180
1.563
.250
1.6920
1.375
.250
2.1930
1.6875
.281
1.6920
1.375
.250
1.6300
1.280
.315
1.8180
1.500
.250
1.8140
1.600
.315
1.839
1.6750
1.420
.302
1.651
2.1930
1.6875
.281
1.6920
1.375
.250
2.0680
1.750
.281
1.7550
1.438
.313
1.8180
1.563
.250
1.6920
1.375
.250
1.8800
1.563
.313
1.6920
1.375
.313
2.0680
1.625
.281
1.6920
1.375
.250
2.3800
2.000
.281
2.2550
1.875
.375
2.0680
1.625
.281
1.6920
1.375
.250
2.3800
2.000
.281
2.2550
1.875
.375
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
ALFA-ROMEO
AMERICAN MOTORS/EAGLE/JEEP/RENAULT (ALSO SEE CHRYSLER)
L4
1396cc/1.4L
2.992" Bore
1984-87 C3J (C35) Renault Eng. AMC Passenger
Cars
INT
31652
1.4445
1.090
.354
1.340
1.2570
1.028
.257
1.142
1.4440
1.181
.280
1.340
1.3190
0.977
.300
1.181
1.1320
.825
.285
1.023(26mm)
1.3195
1.065
.285
1.220(31mm)
1.4445
1.162
.310
1.299
1.4440
1.135/1.250
.316
1.339
1.3170
1.046
.313
1.201
1.5680
1.250
.280
1.496
1.3820
1.000
.280
1.220
1.6940
1.300
.360
1.496
1.4440
1.180
.305
1.300
1.7560
1.445/1.617
.310
1.693
1.5050
1.215
.310
1.378
1.4440
1.135/1.250
.316
1.339
1.4445
1.142
.336
1.339
1.3170
1.046
.313
1.201
1.4440
1.200
.297
1.6940
1.450
.297
2.1300
1.812
.250
2.000
1.5680
1.312
.250
1.468
1.6300
1.375
.219
1.563
1.5680
1.312
.219
1.468
1.8190
1.440/1.508
.316
1.732
1.6320
1.298
.317
1.526
(1437-53)
EXH
31617
(1250-53)
L4
85ci/1468cc/1.5L
2.972" Bore
INT
1987-90 SOHC 4G15 Eng. (8 valve head)
Summit
31646
(1437-63)
EXH
31340
(1312--53)
INT
1991-96 SOHC 4G15 Eng. (12 valve head)
Summit
31048
(1125-52)
INT
31630
(1312--62)
EXH
31649
(1437-61)
L4
1597cc/1.6L
3.240" Bore
INT
1989-90 DOHC 4G61 Eng. (16 valve head)
Summit
30809
(1437-68)
EXH
INT
1989-90 DOHC 4G61 Eng. (16 valve head)
Summit
30737
70737
(1312--64)
(1312-64N)
31115
(1562-50)
EXH
31064
(1375-64)
L4
121ci/1984cc/2.0L
3.406"(86.5mm) Bore
INT
1977-81 AMC - Porsche-Audi Eng.
Passenger Car: Gremlin, Pacer
31083
(1687-52)
EXH
31644
(1437-59)
L4
1997cc/2.0L
3.350" Bore
INT
1983-91 SOHC G63B Eng. Carb. & F.I.
AMC Passenger Car
31215
(1750-61)
EXH
30716
(1500-62)
INT
1990-94 DOHC G63B Eng. Talon
30809
(1437-68)
Intake seat for years 5/92-94
INT
31658
(1437-73)
EXH
30737
(1312--64)
L4
2068cc/2.1L
3.386"(86mm) Bore
INT
1984-87 Turbo Diesel Renault Eng.
Jeep
30818
(1437-62)
EXH
30881
(1687-54)
INT
30557
(2125-1)
EXH
30644
(1562-4)
L4
134ci/2.2L
3.125" Bore
1941-65 L Head Eng. Willys Jeep, Passenger
Car
INT
30648
(1625-1)
EXH
30643
(1562-1)
L4
2165cc/2.2L
3.460" Bore
1984-90 J7T Eng (Renault). Medallion, 18i, Fuego, 181 INT
31327
(1812-52)
EXH
31218
(1625-56)
125
VALVE SEAT
1950-73 F Head Eng. Jeep, Passenger Car
F4
134ci/2.2L
3.125" Bore
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
AMERICAN MOTORS/EAGLE/JEEP/RENAULT (CONT'D)
L4
150ci/2.5L
3.876" Bore
INT
1983-99 AMC Eng. Jeep & Passenger Car,
Eagle Premier-(1988-89)
30691
2.0060
1.750
.219
1.910
1.5680
1.312
.219
1.500
1.8180
1.563
.219
1.720
1.6300
1.375
.219
1.500
1.6920
1.438
.219
1.600
1.4425
1.188
.219
1.307
1.6920
1.438
.219
1.600
1.3800
1.125
.188
1.343
1.6300
1.375
.219
1.563
1.4425
1.219
.219
1.343
1.5680
1.312
.219
1.409
1.3800
1.125
.188
1.343
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
1.7550
1.500
.250
1.625
1.4425
1.188
.219
1.375
1.6300
1.375
.219
1.515
1.4425
1.188
.219
1.328
2.0060
1.750
.219
1.892
1.7550
1.438
.250
1.616
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
2.0060
1.750
.219
1.910
1.5680
1.313
.188
1.500
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
(2000-1)
EXH
30643
(1562-1)
L4
151ci/2.5L
4.000" Bore
1980-88 GM Eng. Jeep CJ & DJ Series, Pick-up,
Scrambler
INT
30667
(1812-4)
EXH
30648
(1625-1)
V6
173ci/2835cc/2.8L
3.504" Bore
INT
1984-90 GM Eng. Jeep
30664
(1687-2)
EXH
31030
(1437-3)
L6
195.6ci/3.2L
3.125" Bore
1961-64 OHV Aluminum Eng. AMC, Rambler
INT
30664
(1687-2)
EXH
30790
(1375-4)
1960-65 OHV Cast Iron Eng. AMC, Rambler
INT
30648
(1625-1)
EXH
31031
(1437-2)
1953-65 OHV Cast Iron L-Head Eng. AMC, Rambler
INT
30643
(1562--1)
EXH
30790
(1375-4)
L6
199ci/3.3L
3.750" Bore
1965-70 OHV Cast Iron Eng. AMC, Rambler
INT
30682
(1875-1)
EXH
30711
(1500-1)
V6
225ci/3.7L
3.750" Bore
1966-72 Buick Eng. Jeep CJ & DJ Series,
Gladiator, Truck & Utility, Wagoneer
INT
30659
(1750-1)
EXH
31030
(1437-3)
L6
226ci/3.7L
3.3125" Bore
1954-65 226 Series Continental Eng. Jeep,
Kaiser-Frazer
INT
30648
(1625-1)
EXH
31030
(1437-3)
L6
230ci/3.8L
3.344" Bore
INT
1962-68 OHC Eng. Jeep, Jeep Truck,
Wagoneer & Utility
30691
(2000-1)
EXH
30656
VALVE SEAT
(1750-4)
L6
232ci/3.8L
3.750" Bore
1964-79 AMC Eng. Jeep CJ & DJ, Gladiator,
Truck, Wagoneer & Utility
INT
30682
(1875-1)
EXH
30711
(1500-1)
L6
242ci/4.0L
3.875" Bore
1987-94 Jeep Eng. Jeep Briarwood, Cherokee,
Grand Cherokee, Comanche, Wagoneer
& YJ Series
INT
30691
(2000-1)
EXH
30840
(1562-36)
V8
250ci/4.1L
3.500" Bore
INT
1956-62 AMC Eng. AMC, Rambler
30682
(1875-1)
EXH
30711
(1500-1)
L6
258ci/4.2L
3.750" Bore
INT
1971-90 AMC Eng. AMC, Jeep
30682
(1875-1)
EXH
30711
(1500-1)
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
126126
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
AMERICAN MOTORS/EAGLE/JEEP/RENAULT (CONT'D)
V8
287ci/4.7L
3.750" Bore
INT
1963-66 AMC Eng. AMC, Rambler
30682
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
2.0060
1.750
.219
1.920
1.7550
1.500
.219
1.624
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
2.0060
1.750
.219
1.875
1.6300
1.375
.219
1.500
2.1300
1.812
.250
2.025
1.6920
1.438
.219
1.625
1.7550
1.438
.219
1.687
2.0060
1.750
.219
2.025
1.6920
1.438
.219
1.625
1.7550
1.438
.219
1.687
2.1300
1.812
.250
2.025
1.7550
1.438
.219
1.682
1.4440
1.140
.305
1.337
1.3190
1.085
.305
1.226
1.4440
1.140
.305
1.343
1.3190
1.085
.305
1.232
(1875-1)
EXH
30711
(1500-1)
V8
290ci/4.7L
3.750" Bore
INT
1966-69 AMC Eng. AMC Passenger Car
30682
(1875-1)
EXH
30711
(1500-1)
V8
304ci/5.0L
3.750" Bore
1970-81 AMC Eng. AMC Passenger Car, Jeep
INT
30682
(1875-1)
EXH
30711
(1500-1)
V8
318ci/5.2L
3.910" Bore
1993-95 Chrysler Eng. Jeep, Grand Cherokee
INT
30691
(2000-1)
EXH
30658
(1750-2)
V8
327ci/5.3L
4.000" Bore
INT
1956-70 AMC Passenger Car, Jeep
30682
(1875-1)
EXH
30711
(1500-1)
V8
343ci/5.6L
4.080" Bore
INT
30682
(1875-1)
EXH
30711
(1500-1)
V8
350ci/5.7L
3.800" Bore
1968-71 Buick Eng. Jeep, Jeep Truck & Utility,
Wagoneer
INT
30691
(2000-1)
EXH
30648
(1625-1)
V8
360ci/5.9L
4.080" Bore
1970-93 AMC Eng. AMC Passenger Car(70-78),
Jeep (72-93)
Exh. valve w 1.625 vl. hd. (1970)
INT
30557
(2125-1)
EXH
30664
(1687-2)
Exh. valve w 1.687 vl. hd. (1970-93)
EXH
30655
(1750-3)
V8
390ci/6.4L
4.165" Bore
INT
30691
(2000-1)
Exh. valve w 1.625 vl. hd. (1968-early'70)
EXH
30664
(1687-2)
Exh. valve w 1.687 vl. hd., (late 1970)
EXH
30655
(1750-3)
INT
(1971-76), Jeep (1974-78)
30557
(2125-1)
30655
(1750-3)
AUDI
L4
1471cc/1.5L
76.5mm Bore
INT
1973-75 SOHC 1500S XZ Series VW Eng.
Audi Fox
31643
(1437-50)
EXH
30562
(1312-56)
L4
1588cc/1.6L
76.5mm Bore
1982-84 SOHC 4E, 1600N Series VW Eng. CJ, CR,
CY, JK Diesel & Turbo Diesel. SOHC
Audi 4000 Diesel
127
INT
31643
(1437-50)
EXH
30562
70562
(1312-56)
(1312-56N)
VALVE SEAT
EXH
V8
401ci/6.6L
4.165" Bore
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
AUDI (CONT'D)
L4
1588cc/1.6L
76.5mm Bore
1975-80 4E, 1600N Series VW, YG, YH, YK Gas
Eng. Audi Fox, 4000.
INT
31643
1.4440
1.140
.305
1.337
1.3190
1.085
.305
1.226
1.4440
1.140
.305
1.343
1.3190
1.085
.305
1.232
1.5680
1.312
.313
1.495
1.4440
1.180
.305
1.300
1.6320
1.340
.307
1.495&1.579
1.3820
1.120
.325
1.299
1.5680
1.312
.313
1.495
1.4440
1.180
.305
1.298
1.6320
1.340
.307
1.555
1.3820
1.120
.325
1.299
1.5070
1.220/1.315
.310
1.421
1.3190
1.085
.305
1.232
1.5680
1.312
.313
1.495
1.3190
1.085
.305
1.228
1.5680
1.312
.313
1.495
1.3190
1.085
.305
1.228
1.4440
1.180
.305
1.300
1.6320
1.340
.307
1.495
1.3820
1.120
.325
1.298
1.6320
1.340
.307
1.500
1.3820
1.120
.325
1.299
1.6320
1.340
.307
1.500
1.3820
1.120
.325
1.311
1.3170
1.046
.313
1.264
1.1320
0.900
.325
1.106
(1437-50)
EXH
30562
(1312-56)
L4
1715cc/1.7L
79.5mm Bore
1981-83 SOHC 4E, 1700 Series VW, WT Eng.
Audi 4000.
INT
31643
(1437-50)
EXH
30562
(1312-56)
L4
1760cc/1.8L
81.5mm Bore
1970-73 Audi 2Z Eng. Super 90, 100LS, 100S, 100Z
INT
30731
(1562-65)
EXH
31644
(1437-59)
L4
1781cc/1.8L
81mm Bore
1984-87 SOHC JN, ME, MG, MJ Eng. Audi 4000S
INT
31692
(1625-50)
EXH
31635
(1375-55)
L4
1871cc/1.9L
84mm Bore
1972-77 SOHC 1900S Z Series Eng. Audi 100,
100GL & 100LS. Carb. Engs 1972-74.
F.I. Engs, 1975-77.
INT
30731
(1562-65)
EXH
31644
(1437-59)
L4
1983cc/2.0L
82.5mm Bore
INT
1988-91 SOHC 3A Eng. 80 Model
31692
(1625-50)
EXH
31635
(1375-55)
L5
1986cc/2.0L
76.5mm Bore
L5
2144cc/2.1L
79.5mm Bore
1979-84 SOHC CN, D24 & DE Audi Diesel Eng.
SOHC Audi 5000 Diesel & Turbo Diesel.
INT
EXH
1977-85 SOHC Audi W Series WD, WE Eng.
Audi 4000 5E, 4000S, 5000, 5000S & 5000
Coupe, Coupe GT
30716
(1500-62)
INT
30562
70562
(1312-56)
(1312-56N)
30731
(1562-65)
EXH
30562
(1312-56)
1980-85 SOHC Audi K, W Series ET, KH, WK, WU,
WX Eng. Audi 5000, Quattro.
INT
30731
(1562-65)
EXH
30562
(1312-56)
Audi 5000 Turbo, Quattro Turbo (exh)
1984
SOHC Audi W Series WU, WV Eng.
Audi 5000S, 5000 Wagon.
EXH
INT
31644
71644
(1437-59)
(1437-59N)
31692
(1625-50)
EXH
31635
VALVE SEAT
(1375-55)
L5
2226cc/2.2L
81mm Bore
1983-87 SOHC JK, JT, KX, KZ Series Eng. Audi
4000, 4000CS, 4000S Quattro, 5000S,
5000S Coupe GT
INT
31692
(1625-50)
EXH
31635
(1375-55)
1986-91 SOHC MC Eng. Audi 200, 200 Turbo,
5000CS Quattro & 5000CS Quattro
Turbo
INT
EXH
INT
1992-96 DOHC AAN 20 Valve Turbo Eng.
S4, S6, 200 Quattro Turbo.
31692
(1625-50)
31635
71635
(1375-55)
(1375-55N)
30737
(1312-64)
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
128128
31605
71605
(1125-54)
(1125-54N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
AUDI (CONT'D)
L5
2309cc/2.3L
82.5mm Bore
1990-92 DOHC 7A, 3B 20 Valve Eng. 90 Quattro,
Coupe Quattro
INT
30737
1.3170
1.046
.313
1.264
1.1320
0.900
.325
1.106
1.6320
1.340
.307
1.579
1.3820
1.120
.325
1.299
1.6320
1.340
.307
1.579
1.3820
1.120
.325
1.299
1.4425
1.188
.219
1.310
1.2560
1.000
.219
1.152
1.5680
1.250
.250
1.4421
1.125
.250
1.8810
1.625
.281
1.6320
1.329
.280
1.8195
1.500/1.555
.278
1.5680
1.250
.281
1.8820
1.615
.290
1.811
1.6320
1.345
.290
1.490
1.3820
1.120
.325
1.3170
1.046
.313
1.8820
1.615
.290
1.732
1.6320
1.345
.290
1.490
1.7550
1.438/1.500
.302
1.653
1.5060
1.220/1.328
.310
1.417
1.3820
1.120
.325
1.3170
1.046
.313
(1312-64)
EXH
31605
(1125-54)
1987-92 SOHC Audi N Series, NF, NG Eng.
Audi 80, 90, 100 Quattro, 5000 Quattro
INT
31692
(1625-50)
EXH
31635
(1375-55)
V6
2771cc/2.8L
82.5mm Bore
1992-97 SOHC Eng. A6, A6 Quattro, 90 Series
Quattro & Sport 90, 100 & 100 Quattro
To Chassis 4A-S-026714
INT
31692
(1625-50)
EXH
31635
(1375-55)
AUSTIN
L4
1275cc/1.3L
70.5mm Bore
1966-78 12G, 12H, 12V Series Eng. - Austin,
Austin Healy Sprite, 1300
INT
31030
(1437-3)
EXH
31147
(1250-1)
ASTON MARTIN
INT
A0623132
30645
(1562-7)
EXH
A0623133
30802
(1437-8)
BMW
L4
1600cc/1.6L
INT
1971-72 3 & 5 Series
30683
(1875-4)
EXH
89mm Bore
30860
(1625-54)
INT
1964-71 3 & 5 Series
31285
(1812-55)
EXH
30740
(1562-46)
L4
1766cc/1.8L
89mm Bore
INT
1980-85 SOHC Eng. 318i, 320i, 520i
31740
(1875-52)
EXH
31686
(1625-63)
1990-96 DOHC M 42 Eng. 318i, 318ic, 318is
INT
31635
(1375-55)
30737
(1312-64)
L4
1990cc/2.0L
89mm Bore
1969-79 SOHC Eng. 320i, 520i, 2000, 2002,
2002A, 2002Tii
INT
31740
(1875-52)
EXH
31686
(1625-63)
L6
2494cc/2.5L
84mm Bore
1987-93 SOHC M 20 Eng. 325i, 325ic, 325is, 325ix,
525i, 2500
INT
EXH
1991-95 DOHC M 50 24 Valve Eng.
325i, 525i
31117
(1750-60)
INT
31204
71204
(1500-62)
(1500-62N)
31635
(1375-55)
EXH
129
30737
70737
(1312-64)
(1312-64N)
VALVE SEAT
EXH
L4
1796cc/1.8L
84mm Bore
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
BMW (CONT'D)
L6
2693cc/2.7L
84mm Bore
INT
1986-89 SOHC M 20B27 Eng. 325e, 528e
31117
1.7550
1.438/1.500
.302
1.650
1.5050
1.215
.310
1.339
1.6940
1.335
0.275
1.572
1.5070
1.182
0.275
1.339
1.7560
1.445/1.617
.310
1.807
1.5060
1.220/1.328
.310
1.339
1.8820
1.615
.290
1.811
1.6320
1.345
.290
1.492
1.8820
1.615
.290
1.810
1.6320
1.345
.290
1.495
1.3820
1.120
.325
1.3170
1.046
.313
1.8820
1.615
.290
1.811
1.6320
1.345
.290
1.492
1.9430
1.625
.312
1.846
1.6310
1.298
.317
1.496
1.8820
1.615
.290
1.811
1.6320
1.345
.290
1.496
1.7550
1.438/1.500
.302
1.5070
1.210/1.248
.345
1.7550
1.438/1.500
.302
1.5060
1.180/1.345
.307
1.7550
1.438/1.500
.302
1.5060
1.180/1.345
.307
(1750-60)
EXH
30716
(1500-62)
L6
2693cc/2.7L
84mm Bore
1982-85 SOHC M 20B27 Eng. 325, 325e, 325es,
528e
INT
31705
(1687-57)
EXH
31668
(1500-72)
1986-89 SOHC M 20B27 Eng. 325e, 528e
Alt. Int. w 1.807 vl. hd., .310 depth
INT
31215
(1750-61)
Alt. Exh. w 1.339 vl. hd., .310 depth
EXH
31204
(1500-62)
L6
2788cc/2.8L
86mm Bore
1968-81 SOHC Eng. 528i, 728i, 2800,2800CS,
Bavaria
INT
31740
(1875-52)
EXH
31686
(1625-63)
L6
2985cc/3.0L
89mm Bore
L6
2990cc/3.0L
86mm Bore
L6
3210cc/3.2L
89mm Bore
L6
3430cc/3.4L
92mm Bore
1971-78 SOHC Eng. M3, 3.0S, 3.0CS, 530i,
630i & 3.0L Bavaria
INT
EXH
INT
1994-96 DOHC Eng. M3
31740
(1875-52)
31686
71686
(1625-63)
(1625-63N)
31635
(1375-55)
EXH
INT
1976-84 SOHC Eng. 533i, 733i
30737
70737
(1312-64)
(1312-64N)
31740
(1875-52)
EXH
1987-93 SOHC M 30 Eng. 535i, 535is (1988-93)
735i, 735iL (1987-92)
INT
31686
71686
(1625-63)
(1625-63N)
31134
(1937-7)
EXH
31218
(1625-56)
1982-87 SOHC M 30 Eng. L6, L7, 535i, 535is
(1985-87), 635csi (1985-86),
735i (1985-86)
INT
31740
(1875-52)
EXH
31686
(1625-63)
VALVE SEAT
V12
4988cc/5.0L
84mm Bore
V12
5400cc/5.4L
1988-95 SOHC M 70 Eng. - 750i, 750iL, 850i, 850ci,
850csi
INT
EXH
INT
1995-99 DOHC M 73 Eng. 750iL
EXH
V12
5576cc/5.6L
86mm Bore
INT
1994-95 DOHC S 70 Eng. 850csi
EXH
31117
71117
(1750-60)
(1750-60N)
31291
71291
(1500-63)
(1500-63N)
31117
71117
(1750-60)
(1750-60N)
31258
71258
(1500-53)
(1500-53N)
31117
71117
(1750-60)
(1750-60N)
31258
71258
(1500-53)
(1500-53N)
BRIGGS & STRATTON
1 Cyl
1948-73 14,19, 24, 191, 193, 200, 231, 233, 243
INT
31011
1.3484
1.126
.250
EXH
31011
1.3484
1.126
.250
Series
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
130130
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
BRIGGS & STRATTON (CONT'D)
1 Cyl
1959-73 130,000, 140,000, 170,000, 171,000, 190,000 INT
Series
EXH
1 Cyl
INT
1967-73 300 Series
31011
1.3484
1.126
.250
31011
1.3484
1.126
.250
30658
1.7550
1.500
.219
31011
1.3484
1.126
.250
30790
1.3800
1.125
.188
1.3800
1.125
.188
1.5680
1.312
.219
1.438
1.3800
1.125
.219
1.281
1.5680
1.312
.219
1.438
1.3800
1.125
.219
1.281
1.5050
1.250
.219
1.4425
1.126
.219
1.5050
1.250
.219
1.4425
1.126
.219
1.6300
1.375
.219
1.511
1.3800
1.125
.219
1.281
1.5050
1.250
.250
1.4425
1.219
.219
1.5680
1.312
.219
1.438
1.4425
1.200/1.238
.219
1.375
1.8180
1.500
.250
1.7550
1.375
.219
1.6300
1.375
.219
1.511
1.3800
1.125
.219
1.281
1.6300
1.375
.219
1.511
1.3800
1.125
.219
1.281
(1750-2)
EXH
1 Cyl
INT
141,000, 143,000 Series
(1375-4)
EXH
30790
(1375-4)
BUDA
1 Cyl
38ci
3.438" Bore
2 Cyl
77ci/1.2L
3.438" Bore
L4
138ci/2.3L
INT
1937-62 1BD38
EXH
INT
1937-62 2B77, 2BD77, 2BDMG77 (Diesel)
EXH
INT
G138
EXH
L4
149ci/2.4L
INT
G149
EXH
L4
153ci/2.5L
3.438" Bore
1937-62 4B153, 4BD153, 4BDM153, 4BDMG153,
4BDMR153, 4DME153 (Diesel)
INT
EXH
INT
1963-69 4D153, 4DA153
EXH
INT
1963-69 4G153 Gas & LPG Eng.
30643
70643
(1562-1)
(1562-1N)
30558
70558
(1375-1)
(1375-1N)
30643
70643
(1562-1)
(1562-1N)
30558
70558
(1375-1)
(1375-1N)
30711
70711
(1500-1)
(1500-1N)
30801
70801
(1437-4)
(1437-4N)
30711
70711
(1500-1)
(1500-1N)
30801
70801
(1437-4)
(1437-4N)
30648
70648
(1625-1)
(1625-1N)
30558
70558
(1375-1)
(1375-1N)
30712
70712
(1500-3)
(1500-3N)
31031
71031
(1437-2)
(1437-2N)
30643
70643
(1562-1)
(1562-1N)
EXH
71031
INT
1930-58 H173, HM173
EXH
L4
182ci/3.0L
3.750" Bore
L4
186ci/3.0L
1937-62 4B182, 4BD182, 4BDMR182, 4DA182
INT
EXH
INT
4D186, 4DT186 Diesel
EXH
131
30672
70672
(1812-5)
(1812-5N)
30652
70652
(1750-7)
(1750-7N)
30648
70648
(1625-1)
(1625-1N)
30558
70558
(1375-1)
(1375-1N)
30648
70648
(1625-1)
(1625-1N)
30558
70558
(1375-1)
(1375-1N)
VALVE SEAT
L6
173ci/2.8L
(1437-2N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
BUDA (CONT'D)
L4
196ci/3.2L
3.625" Bore
L6
199ci/3.3L
INT
1937-56 4DT196, 4DTM196 Diesel
EXH
INT
1930-58 H199, HL199, HM199, HP199
EXH
L6
205ci/3.4L
INT
1930-58 H205, HM205, HM205R, HP205
EXH
L4
212ci/3.5L
3.625" Bore
L4
214ci/3.5L
INT
1937-56 4DT212, 4DTM212
EXH
INT
J214, JC214
EXH
L6
217ci/3.6L
INT
1930-58 H217, HM217, HM217R, HP217
EXH
L6
230ci/3.8L
3.438" Bore
1937-62 6B230, 6BD230, 6BDM230, 6BDMR230,
6BD4M230, 6DMR230
INT
EXH
INT
1963-69 6D230, 6DA230
EXH
INT
1963-69 6G230 Gas & LPG Eng.
30648
70648
(1625-1)
(1625-1N)
31030
71030
(1437-3)
(1437-3N)
30672
70672
(1812-5)
(1812-5N)
30652
70652
(1750-7)
(1750-7N)
30672
70672
(1812-5)
(1812-5N)
30652
70652
(1750-7)
(1750-7N)
30648
70648
(1625-1)
(1625-1N)
31030
71030
(1437-3)
(1437-3N)
30648
70648
(1625-1)
(1625-1N)
30661
70661
(1625-9)
(1625-9N)
30672
70672
(1812-5)
(1812-5N)
30652
70652
(1750-7)
(1750-7N)
30648
70648
(1625-1)
(1625-1N)
30558
70558
(1375-1)
(1375-1N)
30712
70712
(1500-3)
(1500-3N)
31031
71031
(1437-2)
(1437-2N)
30643
70643
(1562-1)
(1562-1N)
EXH
71031
1.6300
1.375
.219
1.511
1.4425
1.188
.219
1.281
1.8180
1.500
.250
1.7550
1.375
.219
1.8180
1.500
.250
1.7550
1.375
.219
1.6300
1.375
.219
1.511
1.4425
1.188
.219
1.281
1.6300
1.375
.219
1.6300
1.250
.219
1.8180
1.500
.250
1.7550
1.375
.219
1.6300
1.375
.219
1.511
1.3800
1.125
.219
1.281
1.5050
1.250
.250
1.4425
1.219
.219
1.5680
1.312
.219
1.438
1.4425
1.200/1.238
.219
1.375
1.8180
1.500
.250
1.7550
1.375
.219
1.8180
1.500
.250
1.7550
1.375
.219
1.6300
1.375
.219
1.511
1.3800
1.125
.219
1.281
1.8180
1.563
.250
1.5050
1.250
.250
1.6300
1.313
.219
1.6300
1.313
.219
(1437-2N)
L6
234ci/3.8L
INT
1930-58 HP234
EXH
VALVE SEAT
L6
260ci/4.3L
INT
H260, HM260R, HP260
EXH
L6
273ci/4.5L
3.750" Bore
INT
1937-62 6B273, 6BD273, 6BDMR273
EXH
1953-61 6D273, 6DA273, 6DAMR273, D273
INT
EXH
L6
275ci/4.5L
INT
6LD275, 6LDM275
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
132132
30672
70672
(1812-5)
(1812-5N)
30652
70652
(1750-7)
(1750-7N)
30672
70672
(1812-5)
(1812-5N)
30652
70652
(1750-7)
(1750-7N)
30648
70648
(1625-1)
(1625-1N)
30558
70558
(1375-1)
(1375-1N)
30671
70671
(1812-1)
(1812-1N)
30712
70712
(1500-3)
(1500-3N)
30649
70649
(1625-4)
(1625-4N)
30649
70649
(1625-4)
(1625-4N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
BUDA (CONT'D)
L6
278ci/4.6L
3.625" Bore
L6
281ci/4.6L
INT
1937-56 6DT278 Diesel
EXH
INT
1931-58 KT281
EXH
L6
294ci/4.8L
3.625" Bore
L6
298ci/4.9L
INT
1937-56 6DT294
EXH
1930-58 298R, H298, HM298, HM298R, HP298,
MM
INT
EXH
L6
317ci/5.2L
3.625" Bore
L6
325ci/5.3L
INT
1937-56 6DT317, 6DTM317, 6DTMR317
EXH
INT
1931-58 K325
EXH
L6
326ci/5.3L
INT
1930-58 H326, HM326, HM326R, HP326,
HPG326
EXH
L4
344ci/5.6L
4.438" Bore
INT
1954-60 D344
EXH
INT
1958-60 HD344 - HD 6 Series Diesel Eng.
EXH
L6
351ci/5.7L
INT
1930-58 HP351
EXH
L6
369ci/6.0L
INT
1931-58 K369, KM369, KM369R
INT
1931-58 K381, KM381
EXH
L6
386ci/6.3L
INT
1939-44 BM386
EXH
L6
393ci/6.5L
INT
1931-58 K393, KM393, KM393R
EXH
133
31030
71030
(1437-3)
(1437-3N)
31774
71774
(2125-10)
(2125-10N)
30725
70725
(2000-6)
(2000-6N)
30648
70648
(1625-1)
(1625-1N)
31030
71030
(1437-3)
(1437-3N)
30672
70672
(1812-5)
(1812-5N)
30652
70652
(1750-7)
(1750-7N)
30648
70648
(1625-1)
(1625-1N)
31030
71030
(1437-3)
(1437-3N)
31774
71774
(2125-10)
(2125-10N)
30725
70725
(2000-6)
(2000-6N)
30672
70672
(1812-5)
(1812-5N)
30652
70652
(1750-7)
(1750-7N)
31769
71769
(2062-2)
(2062-2N)
30657
70657
(1750-5)
(1750-5N)
31784
71784
(2187-13)
(2187-13N)
30678
70678
(1687-7)
(1687-7N)
30672
70672
(1812-5)
(1812-5N)
30652
70652
(1750-7)
(1750-7N)
31774
71774
(2125-10)
(2125-10N)
30725
70725
(2000-6)
(2000-6N)
31774
71774
(2125-10)
(2125-10N)
30725
70725
(2000-6)
(2000-6N)
31252
71252
(2250-2)
(2250-2N)
31774
71774
(2125-10)
(2125-10N)
31774
71774
(2125-10)
(2125-10N)
30725
70725
(2000-6)
(2000-6N)
1.6300
1.375
.219
1.511
1.4425
1.188
.219
1.281
2.1305
1.750
.281
2.0060
1.625
.281
1.6300
1.375
.219
1.511
1.4425
1.188
.219
1.281
1.8180
1.500
.250
1.7550
1.375
.219
1.6300
1.375
.219
1.511
1.4425
1.188
.219
1.281
2.1305
1.750
.281
2.0060
1.625
.281
1.8180
1.500
.250
1.7550
1.375
.219
2.0680
1.750
.281
1.7550
1.438
.313
2.1930
1.6875
.281
1.6920
1.375
.250
1.8180
1.500
.250
1.7550
1.375
.219
2.1305
1.750
.281
2.0060
1.625
.281
2.1305
1.750
.281
2.0060
1.625
.281
2.2560
1.875
.281
2.1305
1.750
.281
2.1305
1.750
.281
2.0060
1.625
.281
VALVE SEAT
L6
381ci/6.2L
70648
(1625-1N)
EXH
30648
(1625-1)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
BUDA (CONT'D)
L6
404ci/6.6L
INT
1931-58 K404, KM404
EXH
L6
411ci/6.7L
INT
1939-44 BM411, BM411-I
EXH
L6
415ci/6.8L
INT
1939-48 6DT415, 6DTM415 Diesel
EXH
INT
6LD415, 6LDM415
EXH
L6
428ci/7.0L
INT
1931-58 K428, KG428, KM428, KM428R
EXH
L6
468ci/7.7L
1931-58 K468, KM468, L468, LM468, 6LD468,
6LDM468
INT
EXH
1939-48 6DT468, 6DTM468, 6DTMR468 Diesel,
6DTS468 Supercharged Diesel
INT
EXH
L6
479ci/7.8L
INT
1931-58 K479
EXH
L6
516ci/8.5L
4.438" Bore
1954-60 HD11 Series Diesel Eng. ADS516,
D516, TDS516, 6DAS516
INT
EXH
INT
1958-60 HD516 Series Diesel Eng.
EXH
INT
1931-58 L525, LG525, LM525, LM525A
EXH
VALVE SEAT
L6
525ci/8.6L
INT
1947-55 LO525
EXH
L4
INT
1948-56 4DC645
645ci/10.6L
EXH
L6
691ci/11.3L
INT
GLD691, 6LDM691,
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
134134
31774
71774
(2125-10)
(2125-10N)
30725
70725
(2000-6)
(2000-6N)
31252
71252
(2250-2)
(2250-2N)
31774
71774
(2125-10)
(2125-10N)
30932
70932
(1937-4)
(1937-4N)
30677
70677
(1687-5)
(1687-5N)
31774
71774
(2125-10)
(2125-10N)
30919
70919
(1875-9)
(1875-9N)
31774
71774
(2125-10)
(2125-10N)
30725
70725
(2000-6)
(2000-6N)
31774
71774
(2125-10)
(2125-10N)
30725
70725
(2000-6)
(2000-6N)
30932
70932
(1937-4)
(1937-4N)
30677
70677
(1687-5)
(1687-5N)
31774
71774
(2125-10)
(2125-10N)
30725
70725
(2000-6)
(2000-6N)
31769
71769
(2062-2)
(2062-2N)
30657
70657
(1750-5)
(1750-5N)
31784
71784
(2187-13)
(2187-13N)
30678
70678
(1687-7)
(1687-7N)
31774
71774
(2125-10)
(2125-10N)
30725
70725
(2000-6)
(2000-6N)
31774
71774
(2125-10)
(2125-10N)
31091
71091
(1875-0)
(1875-0N)
30994
70994
(2375-2)
(2375-2N)
31775
71775
(2125-0)
(2125-0N)
31774
71774
(2125-10)
(2125-10N)
30932
70932
(1937-4)
(1937-4N)
2.1305
1.750
.281
2.0060
1.625
.281
2.2560
1.875
.281
2.1305
1.750
.281
1.9420
1.5625
.250
1.6920
1.375
.219
2.1305
1.750
.281
1.8800
1.500
.250
2.1305
1.750
.281
2.0060
1.625
.281
2.1305
1.750
.281
2.0060
1.625
.281
1.9420
1.5625
.250
1.6920
1.375
.219
2.1305
1.750
.281
2.0060
1.625
.281
2.0680
1.750
.281
1.7550
1.438
.313
2.1930
1.6875
.281
1.6920
1.375
.250
2.1305
1.750
.281
2.0060
1.625
.281
2.1305
1.750
.281
1.8800
1.500
.375
2.3820
2.000
.281
2.1305
1.750
.375
2.1305
1.750
.281
1.9420
1.5625
.250
DIA.
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
BUDA (CONT'D)
L6
779ci/12.8L
INT
6DA779 (Early), 6MO779 Gas
EXH
INT
1951-58 6DA779 (Late)
EXH
L6
844ci/13.8L
5.250" Bore
L6
909ci/14.8L
1944-60 Standard Diesel: 6DC844, 6DCG844,
INT
6DCM844, 6DCMR844,
Supercharged Diesel: 6DCS844, 6DCSM844, EXH
6DCSMR844, 6DA844, 6DAS844, 6DAM844,
6DAMS844
1939-44 6DT909, 6DTM909, 6LD909, 6LDM909
INT
EXH
V-8
1125ci/18.4L
5.250" Bore
L6
1944-60 Standard Diesel: 8DC1125, 8DCG1125
Supercharged Diesel: 8DA1125, 8DAS1125,
8DAM1125, 8DASM1125, 8DCS1125,
8DCSM1125
BA6, BMA6, BMAR6,BU, BUS
INT
EXH
INT
EXH
L6
HS, HS6, HS6A Diesel
L6
5.750" Bore
KBH, KBU, KBUI, KEB, KTB, KTH, KTU
30994
70994
(2375-2)
(2375-2N)
31775
71775
(2125-0)
(2125-0N)
30994
70994
(2375-2)
(2375-2N)
31787
71787
(2250-13)
(2250-13N)
31252
71252
(2250-2)
(2250-2N)
31774
71774
(2125-10)
(2125-10N)
30994
70994
(2375-2)
(2375-2N)
31787
71787
(2250-13)
(2250-13N)
31252
71252
(2250-2)
(2250-2N)
31774
71774
(2125-10)
(2125-10N)
30672
70672
(1812-5N)
EXH
L4
5.750" Bore
70932
(1937-4N)
(1812-5)
INT
JV4, JX4
30932
(1937-4)
EXH
EXH
L4
5.750" Bore
71774
(2125-10N)
ONLY
INT
JH6, JK6L, JV6, JV69, JX6, JX64
31774
(2125-10)
INT
EXH
31774
71774
(2125-10)
(2125-10N)
30725
70725
(2000-6)
(2000-6N)
31774
71774
(2125-10)
(2125-10N)
30725
70725
(2000-6)
(2000-6N)
31774
71774
(2125-10)
(2125-10N)
30725
70725
(2000-6)
(2000-6N)
2.1305
1.750
.281
1.9420
1.5625
.250
2.3820
2.000
.281
2.1305
1.750
.375
2.3820
2.000
.281
2.2555
1.875
.375
2.2560
1.875
.281
2.1305
1.750
.281
2.3820
2.000
.281
2.2555
1.875
.375
2.2560
1.875
.281
2.1305
1.750
.281
1.8180
1.500
.250
2.1305
1.750
.281
2.0060
1.625
.281
2.1305
1.750
.281
2.0060
1.625
.281
2.1305
1.750
.281
2.0060
1.625
.281
1.6300
1.375
.219
1.516
1.3800
1.0625
.188
1.203
1.4440
1.188
.219
1.322
1.4425
1.188
.219
1.328
1.3480
1.087
.200
1.203
CASE TRACTOR
L4
124ci/2.0L
3.000" Bore
1940-56 Continental F-124 Eng. V, VC, VI, VO
Series, VO Wheel Tractor, GT 25
Crawler
Alt. Exh. w 1 7/16" cutter & 1.322 vl. hd.
L4
124ci/2.0L
3.250" Bore
1941-60 124 Eng. VA Series includes VA, VAC, VAI,
VAO, VAS, VAC-14
INT
EXH
EXH
INT
EXH
135
30648
70648
(1625-1)
(1625-1N)
30786
70786
(1375-3)
(1375-3N)
31159
71159
(1437-3)
(1437-3N)
31030
71030
(1437-3)
(1437-3N)
31633
71633
(1348E-1)
(1348E-1N)
VALVE SEAT
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L4
126ci/2.1L
3.125" Bore
L4
133ci/2.2L
3.250" Bore
L4
148ci/2.4L
3.375" Bore
INT
G 126, 200B Eng.
EXH
Waukesha FC Eng. R, RC, RO Series
8-10-12" Cut
INT
EXH
1958-60 G 148, G 148B, 470, 480CK Eng.
before serial # 2638706
300, 300B, 310, 310 Crawler Tractor,
310C, 311, 312, 320, 400B, 410 & 420 Series
G 148B, 470, 480CK Eng., same appl. above,
after serial # 2638706
INT
EXH
INT
EXH
L4
154ci/2.5L
3.500" Bore
L4
157ci/2.6L
3.375" Bore
L4
159ci/2.6L
3.500" Bore
1940-56 154, 154G Gas Eng. S, SC, SE, SI, SL, SO
Series
INT
EXH
Continental G157, GD 157 Diesel Eng.
300 Series
INT
EXH
1960-71 G 159 LPG Eng. 159, 159B, 159G,
G 159B Series
INT
31030
71030
(1437-3)
(1437-3N)
31633
71633
(1348E-1)
(1348E-1N)
31030
71030
(1437-3)
(1437-3N)
31030
71030
(1437-3)
(1437-3N)
31030
71030
(1437-3)
(1437-3N)
31633
71633
(1348E-1)
(1348E-1N)
30711
70711
(1500-1)
(1500-1N)
31633
71633
(1348E-1)
(1348E-1N)
30711
70711
(1500-1)
(1500-1N)
30790
70790
(1375-4)
(1375-4N)
31030
71030
(1437-3)
(1437-3N)
30775
70775
(1312-1)
(1312-1N)
30711
70711
(1500-1)
(1500-1N)
EXH
71633
1.4425
1.188
.219
1.328
1.3480
1.087
.200
1.203
1.4425
1.188
.219
1.349
1.4425
1.188
.219
1.349
1.4425
1.188
.219
1.349
1.3480
1.087
.200
1.203
1.5050
1.250
.219
1.415
1.3480
1.087
.200
1.270
1.5050
1.250
.219
1.437
1.3800
1.125
.188
1.281
1.4425
1.188
.219
1.328
1.3175
1.0625
.188
1.5050
1.250
.219
1.415
1.3480
1.087
.200
1.203
1.5680
1.250
.219
1.415
1.5050
1.250
.219
1.415
1.3800
1.125
.219
1.203
1.5680
1.312
.219
1.438
1.3480
1.087
.200
1.203
1.5680
1.250
.219
1.328
1.3480
1.087
.200
1.203
1.6300
1.375
.219
1.6300
1.375
.219
1.6300
1.375
.219
1.5050
1.250
.250
1.406
1.6920
1.438
.219
1.604
1.5050
1.250
.250
1.406
(1348E-1N)
Alt. Int. w 1.568 cutter & 1.415 vl. hd.
1960-71 G 159 Gas Eng. 530, 530CK, 540,
540B, 541, 541C, 570, 570 Wheel
Tractor, 580CK Series
Alt. Int. w 1 9/16" cutter & 1.438 vl. hd.
Alt. Exh. w 1.348" cutter & 1.203 vl. hd.
VALVE SEAT
L4
164ci/2.7L
3.563" Bore
L4
186ci/3.0L
3.625" Bore
L4
188ci/3.1L
3.813" Bore
1955-60 G 164 Gas & LPG Eng. 500B,
510B, 511B, 600B, 610B, 611B Series
INT
INT
EXH
INT
EXH
INT
EXH
Waukesha XA , Inc. XH, XHA, XUH
Eng. A, B, Prairie 8-10-12" Cut
INT
EXH
1957-69 G 188B Gas & LPG Eng. 450, 600,
630, 630C, 631, 640, 641, 660, 1050
Crawler, 1150 Combine, W5A Ind. Series
1960-71 G 188D Diesel Eng. 430, 430D, 440,
441, 450, 470, 480, 530, 600, 630,
630D, 630D Wheel Tractor, 640, 660,
660 Combine, W3, W5A Series
INT
EXH
INT
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
136136
30640
70640
(1562-6)
(1562-6N)
30711
70711
(1500-1)
(1500-1N)
30558
70558
(1375-1)
(1375-1N)
30643
70643
(1562-1)
(1562-1N)
31633
71633
(1348E-1)
(1348E-1N)
30640
70640
(1562-6)
(1562-6N)
31633
71633
(1348E-1)
(1348E-1N)
30648
70648
(1625-1)
(1625-1N)
30648
70648
(1625-1)
(1625-1N)
30648
70648
(1625-1)
(1625-1N)
30712
70712
(1500-3)
(1500-3N)
30664
70664
(1687-2)
(1687-2N)
30712
70712
(1500-3)
(1500-3N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L6
209ci/3.4L
3.188" Bore
INT
1958-60 Continental F209 Eng.
G 610 Crawler Tractor
EXH
Alt. Exh. using 1 3/8" cutter & 1.328 vl. hd.
Alt. Exh. using 1 7/16" cutter & 1.328 vl. hd.
L4
239ci/3.9L
4.0165" Bore
390 Cummins B Diesel & Turbo Diesel
390 Series, 4-390, 4T-390 Series.
EXH
INT
EXH
Universal size Int. insert for heads w/o OEM insert
Universal size Exh. insert for heads w/o OEM insert
L4
251ci/4.1L
4.000" Bore
EXH
1956-60 251 Gas Eng. Dist LP, 120 Combine,
301, 400, 600, 700, 740, 800, 900,
930, 940 Series
INT
EXH
INT
EXH
INT
1954-59 251D Diesel Eng. 400, 400 Wheel
Tractor, 500, 600, 900
EXH
EXH
INT
1955-68 A251, A251S Gas, LPG Eng.
EXH
L4
260ci/4.3L
3.875" Bore
L4
267ci/4.4L
4.125" Bore
Continental 260, HD 260 Eng.
C, CC, CD, CE, CI, CO, 17-27; D, DC, DE,
DH, DI, DO, DV, P, Prairie 12-16-20" Cut
after S/N 304364
1959-73 267D, A267, A267D Diesel Eng.
700B, 730, 740, 800B, 1000 Series
8BD Wheel Tractor
INT
EXH
INT
EXH
30648
70648
(1625-1)
(1625-1N)
31633
71633
(1348E-1)
(1348E-1N)
30786
70786
(1375-3)
(1375-3N)
31030
71030
(1437-3)
(1437-3N)
31734
71734
(1853E-1)
(1853E-1N)
31709
71709
(1722E-1)
(1722E-1N)
31738
71738
(1875-8)
(1875-8N)
30652
70652
(1750-7)
(1750-7N)
30671
70671
(1812-1)
(1812-1N)
30646
70646
(1625-2)
(1625-2N)
30648
70648
(1625-1)
(1625-1N)
30712
70712
(1500-3)
(1500-3N)
30711
70711
(1500-1)
(1500-1N)
30667
70667
(1812-4)
(1812-4N)
30646
70646
(1625-2)
(1625-2N)
30672
70672
(1812-5)
(1812-5N)
30672
70672
(1812-5)
(1812-5N)
30667
70667
(1812-4)
(1812-4N)
31019
71019
1.6300
1.375
.219
1.516
1.3480
1.087
.200
1.203
1.3800
1.063
.188
1.328
1.4425
1.188
.219
1.328
1.8530
1.498
.273
1.772
1.7220
1.357
.265
1.654
1.8800
1.500
.219
1.772
1.7550
1.375
.219
1.654
1.8180
1.563
.250
1.720
1.6300
1.375
.250
1.545
1.6300
1.375
.219
1.542
1.5050
1.250
.250
1.380
1.5050
1.250
.219
1.380
1.8180
1.563
.219
1.731
1.6300
1.375
.250
1.545
1.8180
1.500
.250
1.750
1.8180
1.500
.250
1.750
1.8180
1.563
.219
1.731
1.6386
1.339
.315
1.484
1.6920
1.375
.219
1.5050
1.250
.250
1.406
1.8180
1.500
.250
1.750
1.6300
1.313
.250
1.380
1.8800
1.562
.250
1.8180
1.500
.250
1.8180
1.500
.219
1.9440
1.688
.250
1.7550
1.438
.313
(1630E-1+10) (1630E-1N+10)
INT
1953-60 267D, A377, 400 Diesel & Super
Diesel Series
EXH
EXH
1960-70 284, 284B, A284G, A284LP, A284S
Gas & LPG Eng. 830, 840, 1000
Series Combine
L4
301ci/4.9L
4.375" Bore
1960-71 301, 301B, 301BG, 301D, A301,
A301BD, A301D, A301DF Diesel Eng.
830, 840, 1000 Combine Series
137
INT
EXH
EXH
INT
EXH
30712
70712
(1500-3)
(1500-3N)
30672
70672
(1812-5)
(1812-5N)
30650
70650
(1625-3
(1625-3N)
30509
70509
(1875-2)
(1875-2N)
30672
70672
(1812-5)
(1812-5N)
30668
70668
(1812-2)
(1812-2N)
30560
70560
(1937-1)
(1937-1N)
30657
70657
(1750-5)
(1750-5N)
1.380
VALVE SEAT
L4
284ci/4.7L
4.250" Bore
INT
1958-60 Continental H 277 Eng.
G 810 Crawler Tractor
70677
(1687-5N)
L4
277ci/4.5L
4.000" Bore
30677
(1687-5)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L4
301ci/4.9L
4.375" Bore
L6
359ci/5.9L
4.0165" Bore
INT
1966-71 301BD Diesel Eng.
EXH
590 Cummins B Diesel & Turbo Diesel
590 Series, 6-590, 6T-590 Series.
EXH
Universal size Int. insert for heads w/o OEM insert
Universal size Exh. insert for heads w/o OEM insert
L6
377ci/6.2L
4.000" Bore
INT
INT
EXH
INT
1955-68 377, A377, A377S LPG Eng.
600, 900 Series
30560
70560
(1937-1)
(1937-1N)
30654
70654
(1750-9)
(1750-9N)
31734
71734
(1853E-1)
(1853E-1N)
31709
71709
(1722E-1)
(1722E-1N)
31738
71738
(1875-8)
(1875-8N)
30652
70652
(1750-7)
(1750-7N)
30671
70671
(1812-1)
(1812-1N)
EXH
70646
1.9440
1.688
.250
1.7550
1.375
.313
1.8530
1.498
.273
1.772
1.7220
1.357
.265
1.654
1.8800
1.500
.219
1.772
1.7550
1.375
.219
1.654
1.8180
1.563
.250
1.720
1.6300
1.375
.250
1.545
1.6300
1.375
.219
1.542
1.5050
1.250
.250
1.380
1.6300
1.375
.219
1.542
1.5050
1.250
.250
1.380
1.8180
1.563
.250
1.720
1.6300
1.375
.219
1.380
1.8180
1.500
.250
1.720
1.6300
1.313
.250
1.380
1.8180
1.563
.219
1.731
1.6386
1.339
.315
1.484
2.1305
1.750
0.281
2.1305
1.750
0.281
1.9440
1.688
.250
1.7550
1.375
.313
1.8800
1.500
.250
1.8800
1.500
.250
1.4440
1.188
.219
1.349
1.4440
1.188
.219
1.349
1.5050
1.250
.219
1.437
1.3800
1.125
.188
1.281
(1625-2N)
INT
377 Diesel Eng.
400, 500, 600, 900 Series
EXH
INT
1953-60 A377 Diesel Eng.D1221
EXH
L4
382ci/6.3L
4.500" Bore
INT
1958-69 Continental JD 382 Eng.
1000, 1010 Series Crawler Tractor
EXH
INT
1958-60 Continental JD 382 Eng.
G810 Series
EXH
L6
401ci/6.6L
4.125" Bore
VALVE SEAT
L4
404ci/6.6L
4.625" Bore
L6
451ci/7.4L
4.375" Bore
1960-71 401, 401B, 401BD, 401BDT, 401D,
401DT, A401BD, A401D Diesel Eng.
930, 940, W10 Series
404 Series Eng. LA, LAE, LAI, LE, LI, LO,
26-40
INT
EXH
INT
EXH
451, 451B, 451BD, 451BDT, 451D,
451DT, A451D Diesel & Turbo
Diesel Eng.
1929-56 C, CC, CE, CI, CO, D, DC, DE, DH, DI, DO,
DV, 12-20, 12-20A, 17-27, W, Hillside,
P, Prairie
1935-56 R, RC, RO Series. Waukesha FC Eng.
C, Prairie, 8-10-12" Cut
INT
EXH
INT
EXH
INT
EXH
INT
1940-56 S, SC, SE, SI, SL, SO (154 Eng.)
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
138138
30648
70648
(1625-1)
(1625-1N)
30712
70712
(1500-3)
(1500-3N)
30648
70648
(1625-1)
(1625-1N)
30712
70712
(1500-3)
(1500-3N)
30671
70671
(1812-1)
(1812-1N)
30648
70648
(1625-1)
(1625-1N)
30672
70672
(1812-5)
(1812-5N)
30650
70650
(1625-3
(1625-3N)
30667
70667
(1812-4)
(1812-4N)
31019
71019
(1630E-1+10)
(1630E-1N+10)
31774
71774
(2125-10)
(2125-10N)
31774
71774
(2125-10)
(2125-10N)
30560
70560
(1937-1)
(1937-1N)
30654
70654
(1750-9)
(1750-9N)
30919
70919
(1875-9)
(1875-9N)
30919
70919
(1875-9)
(1875-9N)
31159
71159
(1437-3)
(1437-3N)
31159
71159
(1437-3)
(1437-3N)
30711
70711
(1500-1)
(1500-1N)
30790
70790
(1375-4)
(1375-4N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L6
451ci/7.4L
4.375" Bore
1941-70 VA, VAC, VAI, VAO, VAH, VAS, VAC-14,
210B, 211B, 300 Gas, 430, 440, 441,
441 Gas, 530, 530C, 540, 541LP
(G148B, G159 Engs.)
INT
EXH
31030
71030
(1437-3)
(1437-3N)
31633
71633
(1348E-1)
(1348E-1N)
1.4425
1.188
.219
1.349
1.3480
1.087
.200
1.203
1.6300
1.313
.219
1.6300
1.250
.219
1.8180
1.563
.250
1.6920
1.438
.250
1.7550
1.438
.250
1.7550
1.438
.250
2.1500
1.859
.292
2.094 30º
1.9120
1.625
.281
1.804
2.0060
1.6880
.438
1.889 30º
1.8800
1.563
.438
1.770 30º
2.2555
1.813
.250
1.895
2.0060
1.625
.250
1.771
2.0055
1.562
.250
1.8800
1.500
.250
2.1500
1.859
.292
2.094 30º
1.9120
1.625
.281
1.804
2.1290
1.813
.437
2.020 30º
2.1310
1.813
.437
2.020 30º
2.0035
1.6880
.438
1.896 30º
2.0040
1.685
.317
1.896 30º
2.0040
1.688
.438
1.896 30º
2.0060
1.6880
.438
1.896 30º
2.1310
1.813
.437
2.020 30º
2.0035
1.6880
.438
1.896 30º
CATERPILLAR
L4
3.750" Bore
1947-58 D311-D2 Tractor, D3400, 212 Motor Grader
INT
EXH
L4
163ci/2.7L
4.000" Bore
INT
D311-H
EXH
1959-on D311-D2 Tractor, 212 Motor Grader
INT
EXH
L4
318ci/5.2L
4.500" Bore
L4
350ci/5.7L
4.500" Bore
3204 Diesel & Turbo Diesel Eng.
1140, 1145, 1150, 1160 Series Truck
(OEM Intake Seat # 2N8943)
(OEM Exhaust Seat # 9N2837)
D312, D330, D330A, D330B, 1670
Diesel
EXH
INT
EXH
1947-60 12, 112-120 Series Motor Grader, D4
Tractor, D4C, D4C-D, D4F, D6 Tractor,
D6F, DW10, D312, D315, D318
1933-47 12, 48, 112 Series Motor Grader,
D4, D6, DW10, D321, D468, D4400,
D4600 Diesel
D315, D315G, 3204 Diesel & Turbo Diesel
Eng. (OEM Intake Seat # 2N8943)
(OEM Exhaust Seat # 9N2837)
D330C, D333C, 3304 (NG/Diesel) OEM Int.
Seat #5S7218
To serial #76R3176
Exh. seat for Direct Injection - 3304 Series
EXH
INT
EXH
INT
EXH
INT
INT
EXH
30661
70661
(1625-9)
(1625-9N)
30671
70671
(1812-1)
(1812-1N)
30673
70673
(1687-3)
(1687-3N)
30656
70656
(1750-4)
(1750-4N)
30656
70656
(1750-4)
(1750-4N)
31782
71782
(2150E-1)
(2150E-1N)
31746
71746
(1912E-1)
(1912E-1N)
30703
70703
(2006E-2)
(2006E-2N)
31739
71739
(1880E-2)
(1880E-2N)
31788
71788
(2250-8)
(2250-8N)
30724
70724
(2000-13)
(2000-13N)
31762
71762
(2000-10)
(2000-10N)
30919
70919
(1875-9)
(1875-9N)
31782
71782
(2150E-1)
(2150E-1N)
31746
71746
(1912E-1)
(1912E-1N)
31772
71772
(2129E-1)
(2129E-1N)
31780
71780
(2131E-1)
(2131E-1N)
31758
71758
(2004E-2)
(2004E-2N)
EXH
71761
(2004E-3N)
(OEM Exh. Seat # 2W4837)
Exh. seat for Natural Gas - 3304 Series
EXH
71759
(2004E-4N)
(OEM Exh. Seat # 7N1649)
Exc.Direct Injection & Natural Gas - 3304
Series
D4D, D4E from 27XI-up, 28XI-up
EXH
INT
EXH
139
30703
70703
(2006E-2)
(2006E-2N)
31780
71780
(2131E-1)
(2131E-1N)
31758
71758
(2004E-2)
(2004E-2N)
VALVE SEAT
OEM Exh. seat # 5S7221 & 1W5321
INT
70649
(1625-4N)
L4
425ci/7.0L
4.750" Bore
INT
30649
(1625-4)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L6
525ci/8.6L
4.500" Bore
1960-73 D318 (Head 7H-9853R, 944, 945
INT
Tracavator), D330, D333, D333A, 1673C
Truck (LPG/NG, Diesel & Turbo-Diesel), 1973 EXH
(OEM Exh. Seat # 9M6495)
INT
D318, D318G Diesel Eng.
(OEM Int. Seat # 2N8943)
EXH
12-112-120 Series Motor Grader,
D4 Tractor, D6 Tractor, D6B, D6F,
D312, D315, D318 (LPG/NG), 561BC
Pipe Layer
D334
INT
EXH
INT
EXH
V8
636ci/10.4L
4.500" Bore
INT
1966-73 D336, 1674, 1676 Diesel Eng.
(OEM Int. Seat # 1S2894)
EXH
(OEM Exh. Seat # 1S2895)
3160, 3208 Diesel & Turbo Diesel Eng.
1140, 1145, 1150, 1160 Series Truck P/N
9L9, 641 (OEM Int. Seat # 2N8943)
INT
EXH
L6
638ci/10.5L
4.750" Bore
EXH
30703
70703
(2006E-2)
(2006E-2N)
31739
71739
(1880E-2)
(1880E-2N)
31782
71782
(2150E-1)
(2150E-1N)
31746
71746
(1912E-1)
(1912E-1N)
31788
71788
(2250-8)
(2250-8N)
30724
70724
(2000-13)
(2000-13N)
30718
70718
(1500-63)
(1500-63N)
31664
71664
(1442E-2)
(1442E-2N)
30718
70718
(1500-63)
(1500-63N)
31664
71664
(1442E-2)
(1442E-2N)
31782
71782
(2150E-1)
(2150E-1N)
31746
71746
(1912E-1)
(1912E-1N)
31134
71134
(1937-7)
(1937-7N)
D6C, D6D, D7F, D7G, D333C, 1673,
INT
1673C, 3306 (LPG/NG, Diesel & Turbo Diesel)
(OEM Int. Seat #5S7218 from serial #76R3177 INT
31772
71772
(2129E-1)
(2129E-1N)
31766
71766
3306 Series)
(2049E-1)
(2049E-1N)
(OEM Int. Seat # 7N4448 to serial #76R3176)
OEM Exh. seat # 5S7221 & 1W5321
Exh. seat for Direct Injection - 3306 Series
INT
EXH
31780
71780
(2131E-1)
(2131E-1N)
31758
71758
(2004E-2)
(2004E-2N)
EXH
71761
Exh. seat for Natural Gas - 3306 Series
EXH
EXH
Exc. Direct Injection & Natural Gas
1966-73 D334, 1674 Diesel (OEM Int. Seat # 1S2894)
VALVE SEAT
.438
1.889 30º
1.8800
1.563
.438
1.770 30º
2.1500
1.859
.292
2.028 30º
1.9120
1.625
.281
1.840
2.2555
1.813
.250
1.895
2.0060
1.625
.250
1.771
1.5050
1.215
.345
1.430
1.4470
1.219
.344
1.370
1.5050
1.215
.345
1.430
1.4470
1.219
.344
1.370
2.1500
1.859
.292
2.094 30º
1.9120
1.625
.281
1.804
1.9430
1.625
.312
1.804
2.1290
1.813
.437
2.020 30º
2.0485
1.781
.344
2.020 30º
2.1310
1.813
.437
2.020 30º
2.0035
1.6880
.438
1.896 30º
2.0040
1.685
.317
1.896 30º
71759
2.0040
1.688
.438
1.896 30º
2.0060
1.6880
.438
1.896 30º
1.5050
1.215
.345
1.430
1.4470
1.219
.344
1.370
2.2555
1.813
.250
1.895
2.0060
1.625
.250
1.771
1.5050
1.215
.345
1.430
1.4470
1.219
.344
1.370
(2004E-4N)
1.6880
(2004E-3N)
(OEM Exh. Seat # 2W4837)
INT
EXH
(OEM Exh. Seat # 1S2895)
INT
12E Series Motor Grader
EXH
V8
700ci/11.5L
4.500" Bore
2.0060
INT
D336 Diesel
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
140140
30703
70703
(2006E-2)
(2006E-2N)
30718
70718
(1500-63)
(1500-63N)
31664
71664
(1442E-2)
(1442E-2N)
31788
71788
(2250-8)
(2250-8N)
30724
70724
(2000-13)
(2000-13N)
30718
70718
(1500-63)
(1500-63N)
31664
71664
(1442E-2)
(1442E-2N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
1.563/1.662
.365
1.771
1.6870 1.4375/1.546
.365
1.646
1.6930
1.438
.365
1.646
1.8170
1.500
.375
1.771
1.6920
1.375
.375
1.646
1.8120
1.540
.365
1.771 30º
1.8170
1.540
.365
1.771 30º
1.6870 1.4375/1.546
.365
1.646
1.6875
1.410
.365
1.646 20º
1.6930
1.438
.365
1.646
1.8120
1.540
.365
1.771 30º
1.8170
1.540
.365
1.771 30º
1.6870 1.4375/1.546
.365
1.646
1.6875
1.410
.365
1.646 20º
1.6930
1.438
.365
1.646
2.3680
1.890
.460
2.205 20º
2.3680
1.890
.460
2.205 20º
1.8180
1.563/1.662
.365
1.771
1.6870 1.4375/1.546
.365
1.646
1.6930
1.438
.365
1.646
1.8120
1.540
.365
1.771 30º
1.8170
1.540
.365
1.771 30º
1.6870 1.4375/1.546
.365
1.646
1.6875
1.410
.365
1.646 20º
1.6930
1.438
.365
1.646
2.3680
1.890
.460
2.205 20º
2.3680
1.890
.460
2.205 20º
L6
893ci/14.6L
5.400" Bore
1960-73 D343, 1693 (LPG/NG, Diesel & Turbo
Diesel)
(OEM Exh. Seat Repl. w Std. O.D. for OEM#s
INT
30542
70542
(1818E-1)
(1818E-1N)
EXH
71846
1.8180
(1687E-1N)
9S9699 & 1W5283)
EXH
Alt. Int. (Straight Wall) w 1.771 vl. hd., .365 depth
Alt. Exh. (Straight Wall) w 1.646 vl. hd., .365 depth
INT
EXH
31704
71704
(1693E-1)
(1693E-1N)
31131
71131
(1812-19)
(1812-19N)
30871
70871
(1687-14)
(1687-14N)
1972-73 3406 (LPG/NG, Diesel & Turbo Diesel)
(OEM Replacement Intake seat w/std. O.D. for
INT
OEM#4N5893)
(OEM Replacement Intake seat w/.005 Oversize
INT
O.D. for OEM#4N5893)
31827
71827
(1812E-3)
(1812E-3N)
31726
71726
(1817E-3)
(1817E-3N)
EXH
71846
(1687E-1N)
9S9699 & 1W5283)
(OEM Replacement Exhaust seat for Natural Gas
EXH
71828
(1687E-4N)
w 20º angle, OEM# #61-4014)
EXH
Applications except Natural Gas
V8
1099ci/18.0L
5.400" Bore
31704
71704
(1693E-1)
(1693E-1N)
INT
OEM#4N5893)
INT
31827
71827
(1812E-3)
(1812E-3N)
31726
71726
(1817E-3)
(1817E-3N)
EXH
71846
(1687E-1N)
9S9699 & 1W5283)
EXH
71828
(1687E-4N)
w 20º angle, OEM# #61-4014)
EXH
31704
71704
(1693E-1)
(1693E-1N)
INT
71847
(2368E-2N)
(OEM Replacement seat for Natural Gas w 20º
EXH
angle, OEM#s 7W0028 &6I1713)
71847
(2368E-2N)
V8
1191ci/19.5L
5.400" Bore
INT
D346 Diesel Eng.
30542
70542
(1818E-1)
(1818E-1N)
EXH
71846
(1687E-1N)
9S9699 & 1W5283)
EXH
71704
(1693E-1N)
INT
OEM#4N5893)
INT
31827
71827
(1812E-3)
(1812E-3N)
31726
71726
(1817E-3)
(1817E-3N)
EXH
71846
(1687E-1N)
9S9699 & 1W5283)
EXH
71828
(1687E-4N)
w 20º angle, OEM# #61-4014)
EXH
INT
71704
(1693E-1N)
71847
(2368E-2N)
EXH
angle, OEM#s 7W0028 &6I1713)
31704
(1693E-1)
71847
(2368E-2N)
141
VALVE SEAT
V12
1649ci/27.0L
5.400" Bore
31704
(1693E-1)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V12
1786ci/29.3L
5.400" Bore
D348, 3412 Diesel Eng.
INT
OEM#4N5893, 9M3205)
INT
31827
71827
(1812E-3)
(1812E-3N)
31726
71726
(1817E-3)
(1817E-3N)
EXH
71846
1.540
.365
1.771 30º
1.8170
1.540
.365
1.771 30º
1.6870 1.4375/1.546
.365
1.646
1.6930
1.438
.365
1.646
2.3680
1.890
.460
2.205 20º
2.3680
1.890
.460
2.205 20º
1.8120
1.540
.365
1.771 30º
1.8170
1.540
.365
1.771 30º
1.6870 1.4375/1.546
.365
1.646
1.6930
1.438
.365
1.646
1.4445
1.090
.354
1.2570
1.028
.257
1.4445
1.100
.293
1.337
1.3190
0.977
.300
1.180
1.4445
1.100
.293
1.337
1.3190
0.977
.300
1.180
1.4440
1.181
.280
1.380
1.3190
0.977
.300
1.180
1.1320
.825
.285
1.024
1.3195
1.065
.285
1.220
1.4445
1.162
.310
1.299
(1687E-1N)
9S9699 & 1W5283)
EXH
V16
2199ci
6.700"Bore
1.8120
31704
71704
(1693E-1)
(1693E-1N)
INT
71847
(2368E-2N)
EXH
angle, OEM#s 7W0028 &6I1713)
71847
(2368E-2N)
V16
2382ci/39.0L
5.400" Bore
D349 Diesel Eng.
INT
OEM#4N5893, 9M3205)
INT
31827
71827
(1812E-3)
(1812E-3N)
31726
71726
(1817E-3)
(1817E-3N)
EXH
71846
(1687E-1N)
9S9699 & 1W5283)
EXH
31704
71704
(1693E-1)
(1693E-1N)
CHECKER (SEE GM and CHRYSLER)
CHRIS CRAFT MARINE (SEE ENGINE MFG.)
CHRYSLER CORP. (CHRYSLER, DODGE, DODGE TRUCK,
EAGLE, GM, MITSUBISHI, AND PLYMOUTH) ALSO SEE AMC
L4
1397cc/1.4L
2.992"(76mm) Bore
INT
1984-87 C 35 Renault Eng.
31652
(1437-53)
EXH
31617
(1250-53)
L4
1410cc/1.4L
2.910"(74mm) Bore
INT
1979-84 G 12B, J Series Mitsubishi Eng.
Dodge Colt, Champ
31655
(1437-57)
EXH
31340
VALVE SEAT
(1312-53)
L4
1468cc/1.5L
2.970"(75.5mm) Bore
INT
1985-88 G15B, Q & 4G15 Carb. 8 valve
Mitsubishi Eng.
31655
(1437-57)
EXH
31340
(1312-53)
INT
1987-90 Q & 4G15 M.P.F.I. & E.F.I. 8 valve
Mitsubishi Eng.
31646
(1437-63)
EXH
31340
(1312-53)
1991-96 SOHC 4G15 Series 12 valve
Mitsubishi Eng. Dodge Colt, Summit
26mm Int.Valve Head Diameter
INT
31048
(1125-52)
INT
31mm Int. Valve Head Diameter
31630
(1312-62)
EXH
31649
(1437-61)
142142
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L4
1595cc/1.6L
3.240"(82.3mm) Bore
1989-90 DOHC 4G61 & 4G61T-Non Turbo and
Turbo 16 valve Mitsubishi Eng.
Dodge Colt, Summit
INT
30809
1.4440
1.135/1.250
.316
1.339
1.3170
1.045
.316
1.201
1.5680
1.250
.280
1.488
1.3820
1.000
.280
1.223
1.4445
1.140
.305
1.343
1.3190
1.085
.305
1.228
1.7570
1.438/1.500
.302
1.654
1.5070
1.180
.300
1.339
1.2570
.996
.254
1.181
1.1940
.905
.257
1.063
1.2570
1.023
.273
1.181
1.1945
0.880
.280
1.063
1.6940
1.300
.360
1.493
1.4445
1.180
.305
1.293
1.7570
1.445/1.617
.310
1.693
1.5050
1.215
.310
1.378
1.7570
1.445/1.617
.310
1.693
1.5050
1.215
.310
1.378
1.4440
1.135/1.250
.316
1.339
1.3170
1.045
.316
1.201
1.4445
1.142
.336
1.339
1.3170
1.045
.316
1.201
1.4445
1.120
.300
1.6921
1.312
.315
1.6945
1.390/1.452
.305
1.600
1.5070
1.210/1.248
.345
1.390
2.1300
1.812
.250
2.020
1.5680
1.312
.250
1.468
(1437-68)
EXH
30563
(1312-64)
L4
1597cc/1.6L
3.03"(76.9mm) Bore
L4
1716cc/1.7L
3.130"(79.5mm) Bore
1971-90 SOHC & DOHC 4G32, G32B, K & Z
Series Mitsubishi Eng. inc. Turbo
Dodge Colt, Plymouth Arrow
INT
EXH
INT
1978-83 Audi - VW Eng. Omni, Horizon
31115
71115
(1562-50)
(1562-50N)
31064
71064
(1375-64)
(1375-64N)
31643
(1437-50)
EXH
30562
(1312-56)
L4
1755cc/1.8L
3.170"(80.6mm) Bore
1989-94 SOHC 8 valve 4G37 Series Mitsubishi
P Eng. Colt, Laser, Talon
INT
31117
(1750-60)
EXH
31666
(1500-75)
L4
1834cc/1.8L
3.190"(81mm) Bore
1992
SOHC 16 valve 4G93 Series Mitsubishi
P Eng. Colt, Summit, Vista
INT
31100
(1250-55)
EXH
31146
(1187-51)
1993-96 SOHC 16 valve 4G93 Series Mitsubishi
P Eng. Colt, Summit, Vista
INT
31620
(1250-60)
EXH
31611
(1187-54)
L4
121ci/1984cc/2.0L
3.406"(86.5mm) Bore
INT
1977-79 AMC - Chrysler - Jeep
31083
(1687-52)
EXH
31644
(1437-59)
L4
1995cc/2.0L
3.310"(84mm) Bore
1974-82 SOHC 12 valve G 52 Series Misubishi
U Eng. Dodge Colt, Plymouth Arrow
INT
31215
(1750-61)
EXH
30716
(1500-62)
L4
1997cc/2.0L
3.346"(85mm) Bore
1983-91 SOHC G63, G63B Series Mitsubishi
A Eng. - Carb & F.I. D50 & Dodge Ram,
Truck, Vista
INT
31215
(1750-61)
EXH
30716
(1500-62)
1990-4/92DOHC 16 valve 4G63, G63B Mitsubishi
Turbo and Non Turbo Eng. Laser, Talon
INT
EXH
5/92-98 DOHC 16 valve 4G63, G63B Mitsubishi
Turbo and Non Turbo Eng. Laser, Talon
INT
L4
2212cc/2.2L
3.444"(87.5mm) Bore
F4
134ci/2.2L
3.125" Bore
INT
1984-87 SOHC Turbo Diesel Eng.
EXH
1982-94 SOHC Turbo & Non-Turbo Mitsubishi
Series Eng. Vin A, B, C, D and E. Carb.& F.I.
Colt, Champ
INT
EXH
INT
1950-73 F Head AMC Eng.
30563
70563
(1312-64)
(1312-64N)
31658
71658
(1437-73)
(1437-73N)
30563
70563
(1312-64)
(1312-64N)
31647
71647
(1437-66)
(1437-66N)
31374
71374
(1687-55)
(1687-55N)
31288
71288
(1687-51)
(1687-51N)
31291
71291
(1500-63)
(1500-63N)
30557
(2125-1)
EXH
30644
(1562-4)
143
VALVE SEAT
L4
2068cc/2.1L
3.39"(86mm) Bore
70809
(1437-68N)
EXH
30809
(1437-68)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L4
134ci/2.2L
3.125" Bore
INT
1939-62 L Head AMC Eng.
30648
1.6300
1.375
.219
1.531
1.5680
1.312
.219
1.468
1.7570
1.460
.275
1.575
1.5070
1.182
.275
1.339
1.8820
1.575/1.692
.317
1.811
1.6310
1.298
.317
1.496
1.3820
1.100
.300
1.299
1.2570
0.982
.329
1.142
1.5060
1.175/1.235
.236
1.370
1.3820
1.000
.280
1.201
2.0060
1.750
.219
1.910
1.5680
1.312
.219
1.500
1.8180
1.563
.219
1.720
1.6300
1.375
.219
1.500
1.3820
1.100
.300
1.299
1.2570
0.982
.329
1.142
1.6945
1.390/1.452
.305
1.599
1.5070
1.210/1.248
.345
1.394
1.7560
1.445/1.617
.310
1.689
1.5050
1.215
.310
1.376
1.8820
1.575/1.692
.317
1.810
1.6310
1.298
.317
1.495
1.8810
1.575
.317
1.811
1.6320 1.298/1.422
.317
1.495
1.7550
1.500
.219
1.620
1.4440
1.250
.219
1.360
1.6920
1.438
.219
1.600
1.4425
1.188
.219
1.307
(1625-1)
EXH
30643
(1562-1)
L4
2346cc/2.3L
3.583"(91.1mm) Bore
L4
2351cc/2.4L
3.40"(86.5mm) Bore
1983-86 Diesel & Turbo Diesel Mitsubishi 4D55T
D Series Eng. Ram 50, Ram Truck
INT
EXH
1990-93 SOHC 8 valve 4G64, G64B Mitsubishi T
Series Eng. Light Duty Truck to 1 1/4 Ton
INT
31719
71719
(1750-66)
(1750-66N)
31668
71668
(1500-72)
(1500-72N)
31034
(1875-51)
EXH
31218
(1625-56)
1993-98 SOHC 16 valve 4G64 Mitsubishi T Series
Eng. Vin B. Summit, Vista
INT
31139
(1375-62)
EXH
31615
(1250-59)
L4
2429cc/2.4L
3.445"(87.5mm) Bore
L4
150ci/2.46L
3.800" Bore
L4
151ci/2.5L
4.000" Bore
V6
152.2ci/2497cc/2.5L
3.29"(83.5mm) Bore
1995-99 DOHC 16 valve Mitsubishi Eng series X,
Light Truck series B Eng.
Breeze, Caravan, Cirrus, Colt, Sebring,
Stratus, Voyager
1983-99 AMC, Chrysler, Jeep Passenger Car & Truck
INT
31205
(1500-77)
EXH
31064
(1375-64)
INT
30691
(2000-1)
EXH
1980-84 GM Eng.
Chrysler, Dodge, Plymouth Passenger Cars
INT
70643
(1562-1N)
30667
(1812-4)
EXH
1995-99 SOHC 24 valve Mitsubishi 6G73, H & N
Series Eng. Vin 2. Avenger, Cirrus,
Sebring, Stratus
30643
(1562-1)
INT
30648
70648
(1625-1)
(1625-1N)
31139
(1375-62)
EXH
31615
(1250-59)
L4
153ci/2507cc/2.5L
3.444"(87.5mm) Bore
L4
2555cc/2.6L
3.59"(91mm) Bore
1986-95 SOHC Turbo & Non-Turbo Eng. Vin J, K.
Caravan, Horizon, Lancer, Laser,
LeBaron
1978-81 SOHC Carb. & F.I. G54B F & W Series
Mitsubishi Eng. Challenger, Colt,
Arrow, Sapporo
INT
EXH
INT
31288
71288
(1687-51)
(1687-51N)
31291
71291
(1500-63)
(1500-63N)
31215
(1750-61)
EXH
30716
1981-92 SOHC Carb.& F.I. G54B Mitsubishi Eng.
Inc. Turbo (84-89). Vin D, G, H, N. Arrow,
Charger, Colt, Sapporo, D-50 Truck
VALVE SEAT
(1500-62)
Optional Int. w 1.811 vl. hd., .317 depth
Optional Exh. w 1.495 vl. hd., .317 depth
L6
170ci/2.8L
3.400" Bore
V6
173ci/2.8L
3.500" Bore
1960-69 Slant 6 Eng. Dodge, Plymouth including:
Barracuda, Dart, Lancer, Valiant, 100,
200, 300, 400, 500 Series Truck
1984-86 GM Eng. Chrysler, Dodge, Plymouth
Passenger Car & Light Truck
INT
EXH
INT
EXH
INT
71034
(1875-51N)
31218
71218
(1625-56)
(1625-56N)
31217
71217
(1875-51)
(1875-51N)
31236
71236
(1625-56)
(1625-56N)
30658
(1750-2)
EXH
INT
30556
70556
(1437-1)
(1437-1N)
30664
(1687-2)
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
144144
31034
(1875-51)
31030
71030
(1437-3)
(1437-3N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V6
181.1ci/2972cc/3.0L
3.587"(91.1mm) Bore
1987-99 SOHC 6G72 Mitsubishi Eng. incl. LPG.
Vin 3, H, S. Acclaim, Caravan, Dynasty,
New Yorker, Voyager
1991-96 DOHC 6G72 24 Valve Mitsubishi Eng.
Including Turbo.
INT
EXH
INT
EXH
1991-96 DOHC 6G72 32 Valve Mitsubishi Eng.
including Turbo. Stealth
INT
EXH
L6
198ci/3.2L
3.400" Bore
L6
199ci/3.3L
3.750" Bore
1970-74 Slant 6 Eng. Chrysler, Dodge, Plymouth
including: Barracuda, Dart, Demon,
Duster, Fury, Lancer, Swinger, Valiant,
100, 200, 300, 400, 500 Series Truck
1965-70 AMC Eng. AMC - Chrysler Passenger
Cars
31215
1.7560
1.445/1.617
.310
1.693
1.5690
1.219
.317
1.378
1.4440
1.180
.305
1.375
1.3170
1.046
.313
1.199
1.4440
1.180
.305
1.375
1.3170
1.046
.313
1.199
1.7550
1.500
.219
1.620
1.4440
1.250
.219
1.360
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
1.8820
1.575
.290
1.791
1.5685
1.290/1.345
.324
1.475
1.6300
1.375
.219
1.531
1.5160
1.250
.250
1.407
1.7550
1.500
.219
1.620
1.4440
1.250
.219
1.360
1.7550
1.500
.250
1.625
1.4425
1.188
.219
1.375
1.6300
1.375
.219
1.515
1.4425
1.188
.219
1.328
1.6300
1.375
.219
1.531
1.5160
1.250
.250
1.407
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
1.8820
1.575
.290
1.791
1.5685
1.290/1.345
.324
1.475
1.8180
1.563
.250
1.718
1.6400
1.375
.250
1.501
(1750-61)
INT
31287
71287
(1562-69)
(1562-69N)
31644
71644
(1437-59)
(1437-59N)
30563
70563
(1312-64)
(1312-64N)
31644
71644
(1437-59)
(1437-59N)
30563
70563
(1312-64)
(1312-64N)
30658
(1750-2)
EXH
30556
(1437-1)
INT
30682
(1875-1)
EXH
30711
(1500-1)
V6
201ci/3.3L
3.661"Bore
L6
218ci/3.6L
3.250" Bore
L6
225ci/3.7L
3.400" Bore
V6
225ci/3.7L
3.700" Bore
V6
226ci/3.7L
3.3125" Bore
INT
31741
(1875-54)
EXH
31251
(1562-74)
INT
30648
(1625-1)
Cars, B, C, M, R, T, V, W, 100-500
Series Truck
1960-87 Slant 6 Eng. Chrysler,Dodge, Plymouth
including: Barracuda, Challenger,
Dart, Demon, 5th Ave, Fury, Lancer,
LeBaron, New Yorker, Valiant,
100, 200, 300, 400, 500, 600 Series Truck
1965-71 GM Eng. AMC-Chrysler-Jeep
Passenger Cars & Light Trucks
EXH
INT
30658
(1750-2)
EXH
INT
30556
70556
(1437-1)
(1437-1N)
30659
(1750-1)
EXH
INT
1954-65 AMC Eng. AMC-Chrysler-Jeep
31670
(1516E-1)
31030
71030
(1437-3)
(1437-3N)
30648
(1625-1)
EXH
INT
71030
(1437-3N)
30648
(1625-1)
EXH
31670
(1516E-1)
L6
232ci/3.8L
3.750" Bore
INT
1964-79 AMC Eng. AMC-Chrysler-Jeep
30682
(1875-1)
EXH
30711
(1500-1)
V6
232ci/3.8L
3.780"(96mm) Bore
1991-99 OHV Chrysler Eng. Chrysler, Dodge,
Dodge Caravan, Plymouth, Plymouth
Voyager - Passenger Cars & Mini-Vans
INT
31741
(1875-54)
EXH
31251
(1562-74)
L6
236ci/3.9L
3.437" Bore
1942-56 Chrysler, DeSoto, Dodge, Plymouth
Passenger Cars & Trucks
INT
30671
(1812-1)
EXH
31695
(1640E-1)
145
VALVE SEAT
1942-59 Chrysler, Dodge, Plymouth Passenger
Cars, B, C, M, R, T, V, W, 100, 200, 300,
400 Series Truck
31030
(1437-3)
L6
230ci/3.8L
3.250" Bore
1990-99 OHV Chrysler Eng. Vin R, T, U. Caravan,
Concorde, Dynasty, 5th Ave, Imperial,
Intrepid, Mini-Van, New Yorker, Town &
Country, Voyager
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L6
238.5ci/3.9L
3.910" Bore
1986-91 Dodge Truck & Van Eng. including
F.I. Dakota, Ram, 100, 150, 250, 350
Series Truck
1992-99 Dodge Truck & Van Eng. including
F.I. Dakota, Ram, 100, 150, 250, 350
Series Truck
L6
241ci/4.0L
3.375" Bore
L6
242ci/4.0L
3.875" Bore
V8
250ci/4.1L
3.500" Bore
Passenger Cars
B, C, M, R, T, V, W, 100, 200, 300, 400,
500 Series Truck
1987-99 AMC-Chrysler-Jeep Cherokee,
Commanche, Wagoneer, Wrangler,
Jeep Truck
1956-62 AMC, Rambler, Hudson Passenger Cars.
Ambassador, Classic, Hornet, Rebel
INT
30667
1.8180
1.563
.219
1.780
1.6300
1.375
.219
1.517
2.0060
1.750
.188
1.920
1.6920
1.438
.188
1.624
1.8180
1.563
.250
1.718
1.6400
1.375
.250
1.501
2.0060
1.750
.219
1.910
1.5680
1.313
.188
1.500
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
1.8180
1.563
.250
1.718
1.6400
1.375
.250
1.501
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
1.8180
1.563
.250
1.718
1.6400
1.375
.250
1.501
1.8180
1.563
.250
1.780
1.6300
1.375
.219
1.500
1.9440
1.688
.250
1.844
1.6920
1.438
.219
1.563
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
1.9440
1.688
.250
1.844
1.6920
1.438
.219
1.563
(1812-4)
EXH
INT
30648
70648
(1625-1)
(1625-1N)
30690
(2000-36)
EXH
INT
30873
70873
(1687-16)
(1687-16N)
30671
(1812-1)
EXH
31695
(1640E-1)
INT
EXH
INT
30691
70691
(2000-1)
(2000-1N)
30840
70840
(1562-36)
(1562-36N)
30682
(1875-1)
EXH
30711
(1500-1)
L6
251ci/4.1L
3.438" Bore
L6
258ci/4.2L
3.750" Bore
Passenger Cars
B, C, M, R, T, V, W, 100, 200, 300, 400,
500 Series Truck
1971-90 AMC-Chrysler-Jeep Passenger Cars &
Trucks
INT
30671
(1812-1)
EXH
31695
(1640E-1)
INT
30682
(1875-1)
EXH
30711
(1500-1)
L6
265ci/4.3L
3.437" Bore
Passenger Cars, B, C, M, R, T, V, W,
200, 300, 400, 500, 600 Series Truck
INT
30671
(1812-1)
EXH
31695
(1640E-1)
V8
273ci/4.5L
3.625" Bore
VALVE SEAT
V8
277ci/4.5L
3.750" Bore
V8
287ci/4.7L
3.750" Bore
Car Eng. 100, 200, 300 Series Truck
INT
EXH
Cars, 100-600 Series Light Truck Eng.
INT
30646
70646
(1625-2)
(1625-2N)
30560
(1937-1)
EXH
1963-66 AMC-Chrysler Eng. AMC Passenger
Cars
30671
(1812-1)
INT
30664
70664
(1687-2)
(1687-2N)
30682
(1875-1)
EXH
30711
(1500-1)
V8
290ci/4.8L
3.750" Bore
1966-69 AMC-Chrysler Eng. AMC Passenger
Cars
INT
30682
(1875-1)
EXH
30711
(1500-1)
V8
304ci/5.0L
3.750" Bore
V8
318ci/5.2L
3.910" Bore
Trucks
INT
EXH
Cars, 100-600 Series Truck Eng.
INT
30711
70711
(1500-1)
(1500-1N)
30560
(1937-1)
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
146146
30682
(1875-1)
30664
70664
(1687-2)
(1687-2N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8
318ci/5.2L
3.910" Bore
INT
1992-98 Chrysler - Dodge Truck Eng. w F.I.
Jeep.
30690
2.0060
1.750
.188
1.920
1.6920
1.438
.188
1.624
1.8180
1.563
.250
1.780
1.6300
1.375
.219 1.500 & 1.518
1.6300
1.375
.219
1.500 &1.518
2.0060
1.750
.219
1.880
1.6920
1.438
.219
1.563, 1.600
1.9440
1.688
.250
1,811&1.840
1.9440
1.688
.250
1.811
1.6300
1.375
.250
1.518
1.9440
1.688
.250
1,811&1.840
1.6920
1.438
.219
1.563
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
2.0060
1.750
.219
1.880
1.7550
1.500
.219
1.600
2.1300
1.813
.250
2.020
1.6920
1.438
.219
1.600
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
2.0060
1.750
.219
1.875
1.6300
1.375
.219
1.500
1.8530
1.498
.273
1.772
1.7220
1.357
0.265
1.654
1.8800
1.500
.219
1.772
1.7550
1.375
.219
1.654
(2000-36)
EXH
1968-97 Chrysler - Dodge Truck & Passenger
Gas Eng. 100-600 Series, Jeep,
Chrysler, Dodge, Plymouth Passenger
Cars
Exh. Seat for LPG, Propane and
Natural Gas, see applications above
1981-89 Truck & HD Eng. w 4 BBL Carb.,
350, 400, 500, 600 Series Truck
INT
EXH
30873
70873
(1687-16)
(1687-16N)
30671
70671
(1812-1)
(1812-1N)
30648
70648
(1625-1)
(1625-1N)
70648
(1625-1N)
INT
30691
(2000-1)
EXH
Alt. Int. Seat w 1.811 vl. hd., .250 depth
INT
1969-75 Chrysler - Dodge Recreational Vehicle,
M3, M4
INT
30664
70664
(1687-2)
(1687-2N)
30560
& 1.617
(1937-1)
30560
70560
(1937-1)
(1937-1N)
EXH
70646
(1625-2N)
INT
1957-67 Chrysler, Dodge & Plymouth
Passenger Car & Truck Gas Eng.
EXH
V8
327ci/5.4L
4.000" Bore
V8
340ci/5.6L
4.040" Bore
1962-70 GM Eng. AMC-Chrysler-Jeep Passenger
Car & Truck
EXH
INT
1989-99 Cummins Turbo Diesel. 200, 250, 300,
350 Series Dodge Truck, Dodge Ram,
Power Ram:
OEM Replacement Seat - Intake
EXH
INT
1989-99 Universal Seat for heads w/o OEM Insert
Universal Seat for heads w/o OEM Insert
147
70711
(1500-1N)
30691
70691
(2000-1)
(2000-1N)
30658
70658
(1750-2)
(1750-2N)
30557
30664
70664
(1687-2)
(1687-2N)
30682
(1875-1)
INT
30711
70711
(1500-1)
(1500-1N)
30691
(2000-1)
EXH
INT
EXH
OEM Replacement Seat - Exhaust
30711
(1500-1)
(2125-1)
EXH
1968-71 Buick Eng. AMC-Chrysler-Jeep, Jeep
Wagoneer. Passenger Cars, Trucks &
Utility
30682
INT
EXH
30648
70648
(1625-1)
(1625-1N)
31734
71734
(1853E-1)
(1853E-1N)
31709
71709
(1722E-1)
(1722E-1N)
31738
71738
(1875-8)
(1875-8N)
30652
70652
(1750-7)
(1750-7N)
VALVE SEAT
L6
359ci/5.9L
4.016" Bore
Trucks
70664
(1687-2N)
(1875-1)
INT
1972-73 Chrysler, Dodge, Plymouth & High
Performance Cars
30664
(1687-2)
V8
350ci/5.7L
3.800" Bore
INT
EXH
1968-71 Chrysler, Dodge, Plymouth & High
Performance Cars w 2.02 intake valve
head
V8
343ci/5.6L
4.000" Bore
30560
(1937-1)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8
360ci/5.9L
4.000" Bore
Truck
INT
EXH
EXH
Alt. Exh. w 1.600 vl. hd., for above
yrs 71-90
Cars (1971-80)
Chrysler - Dodge Truck & Van Eng.
w Carb. 100-600 Series (1975-90)
Alt. Exh. Seat w 1.563 vl. hd., .219 depth
1971-89 Chrysler - Dodge Truck Eng. (Carb.)
Gas, LPG, Propane, Natural Gas
INT
EXH
EXH
INT
Alt. Exh. w 1.740 vl. Hd., (1977-79)
EXH
EXH
Exh. Seat w 1.624 vl. hd., (1993-99)
VALVE SEAT
INT
EXH
INT
Int. Seat w 1.920 vl. hd., (1993-99)
INT
EXH
Exh. Seat w 1.600 vl. hd., (1989-92)
V8
361ci/5.9L
4.125" Bore
INT
OEM Exhaust Seat Replacement
(1975-79)
OEM Exhaust Seat Replacement
Exh. w 1.740 vl. Hd., (1977-79)
1989-99 Chrysler - Dodge Truck & Van Eng.
w F.I. 100-600 Series:
Int. Seat w 1.880 vl. hd., (1989-92)
Cars. 500, 600 Series Truck (1958-59)
EXH
INT
EXH
1960-78 Industrial, LPG, Propane & Natural Gas
Eng. 500, 600, 700, 800, 850, 900,
1000 Series
2.1300
1.813
.250
2.025
30664
70664
(1687-2)
(1687-2N)
1.6920
1.438
.219
1.625
30658
70658
(1750-2)
(1750-2N)
1.7550
1.500
.219
1.600
30691
2.0060
1.750
.219
1.880
1.7550
1.500
.219
1.616
1.6920
1.438
.219
1.563
2.0060
1.750
.219
1.880
1.6920
1.438
.219 1.600 & 1.617
1.9440
1.688
.250
1.811
2.0060
1.750
.219
1.880
1.6300
1.375
.250
1.518
1.6920
1.438
.219
1.600
1.8810
1.625
.250
1.740
2.0060
1.750
.219
1.880
1.6920
1.438
.219
1.600
2.0060
1.750
.188
1.920
1.6920
1.438
.188
1.624
2.2555
1.938
.188
2.080
1.7550
1.500
.219
1.600
2.0060
1.750
.219
1.880
1.6245
1.322
.375
1.500
2.1300
1.812
.250
2.078
1.7550
1.500
.219
1.600
2.2555
1.938
.188
2.080
2.2555
1.938
.188
2.078
1.7550
1.500
.219
1.620
2.1300
1.812
.250
2.080
(2000-1)
EXH
1975-79 360-3 HD Truck Eng. 500, 600 Series
OEM Intake Seat Replacement
Alt. Int. w 1.880 vl. Hd., (1977-79)
30557
(2125-1)
INT
30658
70658
(1750-2)
(1750-2N)
30664
70664
(1687-2)
(1687-2N)
30691
70691
(2000-1)
(2000-1N)
30664
70664
(1687-2)
(1687-2N)
30560
70560
(1937-1)
(1937-1N)
30691
70691
(2000-1)
(2000-1N)
30646
70646
(1625-2)
(1625-2N)
30664
70664
(1687-2)
(1687-2N)
30682
70682
(1875-1)
(1875-1N)
30691
70691
(2000-1)
(2000-1N)
30664
70664
(1687-2)
(1687-2N)
30690
70690
(2000-36)
(2000-36N)
30873
70873
(1687-16)
(1687-16N)
30989
70989
(2250-1)
(2250-1N)
30658
70658
(1750-2)
(1750-2N)
30691
70691
(2000-1)
(2000-1N)
EXH
70855
(1624E-1N)
V8
383ci/6.3L
4.031" Bore
Passenger Cars Eng.
INT
INT
1960-67 Chrysler, Dodge, Plymouth
Passenger Car Eng.
100, 200, 300 Series Truck
30557
(2125-1)
EXH
V8
383ci/6.3L
4.250" Bore
INT
30658
70658
(1750-2)
(1750-2N)
30989
70989
(2250-1)
(2250-1N)
30989
(2250-1)
EXH
INT
30658
70658
(1750-2)
(1750-2N)
30557
(2125-1)
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
148148
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8
383ci/6.3L
4.250" Bore
INT
Passenger Car Eng.
100, 200, 300 Series Truck
30989
2.2555
1.938
.188
2.080
1.8810
1.625
.250
1.740
2.1300
1.812
.250
2.080
2.0060
1.750
.219
1.880
1.6920
1.438
.219
1.563
1.7550
1.500
.219
1.620
2.2555
1.938
.188
2.080
1.8810
1.625
.250
1.740
1.8810
1.625
.250
1.740
2.1300
1.812
.250
2.025
1.7550
1.500
.219
1.620
2.2555
1.938
.188
2.080
1.7550
1.500
.219
1.600
2.0060
1.750
.219
1.880
1.6245
1.322
.375
1.500
1.6245
1.322
.375
1.500
2.2555
1.938
.188
2.080
1.7550
1.500
.219
1.600
2.2555
1.938
.188
2.080
1.7550
1.500
.219
1.600
2.2555
1.938
.188
2.080
1.8810
1.625
.219
1.740
2.2555
1.938
.188
2.080
1.8810
1.625
.250
1.740
2.1300
1.812
.250
2.078
2.1300
1.812
.250
2.078
1.8810
1.625
.250
1.740
2.2550
1.938
.188
2.080
(2250-1)
EXH
INT
30682
70682
(1875-1)
(1875-1N)
30557
(2125-1)
V8
390ci/6.4L
4.165" Bore
Trucks
1972-80 Chrysler, Dodge, Plymouth Truck & Van Eng.
Cars. 100, 200, 250, 300, 350 Series
(Exh. Seat for LPG, Propane and Natural Gas, see
30691
(2000-1)
EXH
V8
400ci/6.6L
4.342" Bore
INT
EXH
INT
30664
70664
(1687-2)
(1687-2N)
30658
70658
(1750-2)
(1750-2N)
30989
(2250-1)
EXH
applications above)
30682
70682
(1875-1)
(1875-1N)
INT
70682
(1875-1N)
V8
401ci/6.6L
4.165" Bore
V8
413ci/6.7L
4.188" Bore
Trucks
INT
Passenger Car Eng.
V8
440ci/7.2L
4.320" Bore
30557
(2125-1)
EXH
30658
70658
(1750-2)
(1750-2N)
30989
(2250-1)
EXH
1960-79 Chrysler - Dodge Medium, HD Trucks,
Industrial & R.V. Eng. 600, 700, 800,
850, 900, 1000 Series
V8
426ci/7.0L
4.250" Bore
INT
Exh. Seat for LPG, Propane and Natural Gas,
see applications above
1963-71 Chrysler Hemi (Wedge) Eng. Chrysler,
Dodge, Plymouth Passenger Car
INT
70658
(1750-2N)
30691
(2000-1)
EXH
30855
70855
(1624E-1)
(1624E-1N)
EXH
70855
(1624E-1N)
INT
30989
(2250-1)
EXH
INT
Passenger Car Eng.
30658
(1750-2)
30658
70658
(1750-2)
(1750-2N)
30989
(2250-1)
EXH
INT
Passenger Car Eng.
30658
70658
(1750-2)
(1750-2N)
30989
(2250-1)
INT
70681
(1875-6N)
30989
(2250-1)
EXH
INT
30682
70682
(1875-1)
(1875-1N)
30557
(2125-1)
1968-80 Truck & Industrial, LPG, Propane &
Natural Gas Eng.
INT
30557
70557
(2125-1)
(2125-1N)
EXH
70682
(1875-1N)
149
INT
30989
70989
(2250-1)
(2250-1N)
VALVE SEAT
1968-80 440-3 Truck Eng. Chrysler, Dodge,
Plymouth Passenger Cars & 100, 150,
200, 250, 300, 350 Series Truck, Van
& R.V.
30681
(1875-6)
EXH
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
CHRYSLER INDUSTRIAL
L6
170ci/2.8L
3.400" Bore
INT
170 Industrial Power Unit Eng.
EXH
INT
H170, HB170, HC170 & IND170
Industrial Power Unit Eng.
EXH
L6
198ci/3.2L
3.400" Bore
L6
201ci/3.3L
3.250" Bore
INT
EXH
INT
T50, T57, T81, T105, T125 Series
30659
70659
(1750-1)
(1750-1N)
30711
70711
(1500-1)
(1500-1N)
30659
70659
(1750-1)
(1750-1N)
31030
71030
(1437-3)
(1437-3N)
30659
70659
(1750-1)
(1750-1N)
30711
70711
(1500-1)
(1500-1N)
30643
70643
(1562-1)
(1562-1N)
EXH 30644+10 70644+10
(1562-4+10)
L6
218ci/3.6L
4.375" Bore
L6
225ci/3.7L
3.400" Bore
INT
IND 3, 3A, 5, 5A, 6, 6A, 10, 30, 31,
T40, T41, T42 Series, T112, T116
EXH
H225, HA225, HB225, HC225, IND225
Series
L6
230ci/3.8L
3.250" Bore
V8
230ci/3.8L
3.400" Bore
L6
237ci/3.9L
3.438" Bore
VALVE SEAT
L6
241ci/4.0L
3.375" Bore
L6
251ci/4.1L
3.438" Bore
V8
259ci/4.3L
3.563" Bore
L6
265ci/4.3L
3.437" Bore
V8
273ci/4.5L
3.625" Bore
IND 3, 3A, 5, 5A, 6, 6A, 30, 30A, 31,
HT931, T96, T112, T116 Series
INT
EXH
EXH
INT
EXH
INT
IND 20 Series
EXH
INT
IND7, 7A, T74, T76, T78,
T98, T100, T118, T120 Series
EXH
INT
14, 14A, 15, 15A, 22A, 34, 36,
IND18, IND18A, IND20 Series
EXH
INT
IND8, 8A, 8-213, 8-231,
IND251 Series
EXH
INT
IND52, IND259 Series
EXH
INT
IND16, 16A, 32, 33, H908A Series
EXH
IND19, 19A, 52, 54, IND273 Series
INT
EXH
150150
1.7550
1.500
.250
1.620
1.5050
1.250
.219
1.360
1.7550
1.500
.250
1.620
1.4425
1.188
.219
1.360
1.7550
1.500
.250
1.620
1.5050
1.250
.219
1.360
1.5680
1.312
.219
1.5780
1.312
.250
1.6300
1.375
.219
1.5160
1.250
.250
1.7550
1.500
.250
1.620
1.5050
1.250
.219
1.360
1.4425
1.188
.219
1.360
1.6300
1.375
.219
1.5160
1.250
.250
1.8180
1.563
.250
1.5160
1.250
.250
1.8180
1.563
.250
1.718
1.6300
1.375
.250
1.501
1.8180
1.563
.250
1.5160
1.250
.250
1.8180
1.563
.250
1.718
1.6300
1.375
.250
1.501
1.7550
1.500
.219
1.600
1.5160
1.250
.250
1.8180
1.563
.250
1.718
1.6300
1.375
.250
1.501
1.7550
1.500
.219
1.600
1.5160
1.250
.250
(1562-4+10N)
30648
70648
(1625-1)
(1625-1N)
31670
71670
(1516E-1)
(1516E-1N)
30659
70659
(1750-1)
(1750-1N)
30711
70711
(1500-1)
(1500-1N)
31030
71030
(1437-3)
(1437-3N)
30648
70648
(1625-1)
(1625-1N)
31670
71670
(1516E-1)
(1516E-1N)
30671
70671
(1812-1)
(1812-1N)
31670
71670
(1516E-1)
(1516E-1N)
30671
70671
(1812-1)
(1812-1N)
30646
70646
(1625-2)
(1625-2N)
30671
70671
(1812-1)
(1812-1N)
31670
71670
(1516E-1)
(1516E-1N)
30671
70671
(1812-1)
(1812-1N)
30646
70646
(1625-2)
(1625-2N)
30658
70658
(1750-2)
(1750-2N)
31670
71670
(1516E-1)
(1516E-1N)
30671
70671
(1812-1)
(1812-1N)
30646
70646
(1625-2)
(1625-2N)
30658
70658
(1750-2)
(1750-2N)
31670
71670
(1516E-1)
(1516E-1N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
1.600
CHRYSLER INDUSTRIAL (CONT'D)
V8
315ci/5.1L
3.625" Bore
V8
318ci/5.2L
3.910" Bore
INT
IND53, IND54 Series
EXH
IND318, H318, HA318, HB318, HC318,
HT318 Series
LH318, LT318 Industrial Power Unit Eng.
INT
EXH
INT
EXH
V8
324ci/5.3L
3.250" Bore
V8
331ci/5.4L
3.813" Bore
V8
361ci/5.9L
4.125" Bore
INT
IND 9, 12, 12A Series
EXH
INT
IND14, 14A, 20, 20A, 24, 24A,
IND331 Series
EXH
1960-77 361 Industrial & LPG Power Unit Eng.
IND361, HB361, HC361, HT361 Series
Exh. Seat for Gasoline, Non-LPG Eng.
INT
EXH
30658
70658
(1750-2)
(1750-2N)
31670
71670
(1516E-1)
(1516E-1N)
31762
71762
(2000-10)
(2000-10N)
30664
70664
(1687-2)
(1687-2N)
30659
70659
(1750-1)
(1750-1N)
30648
70648
(1625-1)
(1625-1N)
30648
70648
(1625-1)
(1625-1N)
30822
70822
(1500-6)
(1500-6N)
30671
70671
(1812-1)
(1812-1N)
31670
71670
(1516E-1)
(1516E-1N)
30691
70691
(2000-1)
(2000-1N)
30854
70854
(1625-20)
(1625-20N)
EXH
Exh. Seat for LPG Eng., see above
70855
1.7550
1.500
.219
1.5160
1.250
.250
2.0055
1.563
.250
1.844
1.6920
1.438
.219
1.563
1.7550
1.500
.250
1.620
1.6300
1.375
.219
1.500
1.6300
1.375
.219
1.531
1.5050
1.188
.250
1.8180
1.563
.250
1.5160
1.250
.250
2.0060
1.750
.219
1.880
1.6300
1.313
.395
1.500
1.6245
1.322
.375
1.500
2.1930
1.813
.281
2.080
1.7550
1.500
.219
1.620
2.1930
1.813
.281
2.080
1.7550
1.500
.219
1.620
2.2550
1.938
.188
2.080
1.8810
1.625
.250
1.740
2.1930
1.813
.281
2.080
1.7550
1.500
.219
1.620
2.0060
1.750
.219
1.880
1.6300
1.313
.395
1.500
1.6245
1.322
.375
1.500
2.0060
1.750
.219
1.880
1.6300
1.313
.395
1.500
1.6245
1.322
.375
1.500
2.2550
1.938
.188
2.080
1.8810
1.625
.250
1.740
1.718
(1624E-1N)
H361 Series Industrial Power Unit Eng.
INT
EXH
V8
383ci/6.3L
4.250" Bore
V8
400ci/6.6L
4.342" Bore
V8
413ci/6.7L
4.187" Bore
IND383, H383, HA383, HB383 Series
INT
EXH
INT
IND 400, H400 Series
EXH
INT
IND413, 22, 22A, H413 Series
EXH
INT
30658
70658
(1750-2)
(1750-2N)
31785
71785
(2187-2)
(2187-2N)
30658
70658
(1750-2)
(1750-2N)
30989
70989
(2250-1)
(2250-1N)
30682
70682
(1875-1)
(1875-1N)
31785
71785
(2187-2)
(2187-2N)
30658
70658
(1750-2)
(1750-2N)
30691
70691
(2000-1)
(2000-1N)
30854
70854
(1625-20)
(1625-20N)
EXH
Exh. Seat for LPG Eng.
70855
(1624E-1N)
V8
426ci/7.0L
4.250" Bore
IND426, H426 Series
INT
EXH
30691
70691
(2000-1)
(2000-1N)
30854
70854
(1625-20)
(1625-20N)
EXH
Exh. Seat for LPG Eng.
70855
(1624E-1N)
V8
440ci/7.2L
4.320" Bore
INT
IND440, H440 Series
EXH
151
30989
70989
(2250-1)
(2250-1N)
30682
70682
(1875-1)
(1875-1N)
VALVE SEAT
EXH
71785
(2187-2N)
413 Industrial & LPG Power Unit Eng.
HB413, HC413, HT413 Series
31785
(2187-2)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
CHRYSLER MARINE
L6
170ci/2.8L
3.400" Bore
L6
198ci/3.2L
3.400" Bore
L6
201ci/3.3L
3.250" Bore
L6
218ci/3.6L
3.250" Bore
L6
225ci/3.7L
3.400" Bore
L6
230ci/3.8L
3.250" Bore
V8
250ci/4.1L
4.000" Bore
L6
251ci/4.1L
3.437" Bore
L6
265ci/4.3L
3.437" Bore
VALVE SEAT
V8
318ci/5.2L
3.910" Bore
INT
170 Chrysler Slant 6 Marine Eng.
EXH
INT
V8
331ci/5.4L
3.813" Bore
1.7550
1.500
.250
1.620
30711
70711
(1500-1)
(1500-1N)
1.5050
1.250
.219
1.360
30659
1.7550
1.500
.250
1.620
1.5050
1.250
.219
1.360
1.5680
1.312
.219
1.5680
1.312
0.250
1.6300
1.375
.219
1.5160
1.250
.250
1.7550
1.500
.250
1.620
1.5050
1.250
.219
1.360
1.6300
1.375
.219
1.531
1.5160
1.250
.250
2.0060
1.625
.281
1.811
1.6920
1.438
.250
1.517
1.8180
1.563
.250
1.780
1.6400
1.375
.250
1.8180
1.563
.250
1.6400
1.375
.250
2.0055
1.563
.250
1.844
1.6920
1.438
.219
1.563
2.0060
1.750
.219
1.811
1.6920
1.438
.250
1.517
1.6300
1.375
.219
1.531
1.5050
1.188
.250
1.8800
1.562
.250
1.6920
1.375
.250
2.1305
1.750
.281
1.6300
1.375
.219
(1750-1)
EXH
INT
Chrysler PC Model Marine Eng.
(50-78 Hp)
30711
70711
(1500-1)
(1500-1N)
30643
(1562-1)
EXH
1950-73 Chrysler L6 Marine Eng.
M6, M16, M26, Ace M26, M36, M36S,
Ace M36, M46, Ace M46, M46-3,
M46-4, M46S-3, Ace Special M46S,
T112, T116, T125, T128
M225A, M225D, M225DT, MH225D
Models
M6, M16, M26, Ace M26, M36, M36S,
Ace M36, M46, Ace M46, M46-3,
M46-4, M46S-3, Ace Special M46S,
T112, T116, T125, T128
Chrysler V8 Marine Eng.
M 250 Models
INT
EXH
INT
M8, M18, M28, M38, M48 Royal Models
EXH
INT
M45S, Imperial M45S, M45SP Models
- Late Design
EXH
INT
1.531
31670
71670
(1516E-1)
(1516E-1N)
30659
30711
70711
(1500-1)
(1500-1N)
30648
31670
71670
(1516E-1)
(1516E-1N)
30725
(2000-6)
INT
30673
70673
(1687-3)
(1687-3N)
30671
(1812-1)
EXH
INT
31695
71695
(1640E-1)
(1640E-1N)
30671
1.780
(1812-1)
EXH
31695
(1640E-1)
INT
31762
(2000-10)
EXH
INT
30664
70664
(1687-2)
(1687-2N)
30691
(2000-1)
INT
30673
70673
(1687-3)
(1687-3N)
30648
(1625-1)
INT
30822
70822
(1500-6)
(1500-6N)
30509
(1875-2)
EXH
INT
30678
70678
(1687-7)
(1687-7N)
31774
(2125-10)
EXH
152152
30648
(1625-1)
EXH
M45S, Imperial M45S, M45SP Models
- Early Design
70644
(1562-4N)
(1750-1)
EXH
8A Marine, 16A, 32, M7, M17, M27,
M37, M47 Crown, M47 Crown
Special, M251 Models
8A Marine, 16A, 32, M7, M17, M27,
M37, M47 Crown, M47&M47S Crown
Special, M265, M265A Models
Mech. Lifters Models: M318A, M318B, M318G
Hydraulic Lifter Models: M80, M80A, LM318B,
BD, BT, D
Chrys. V8 Marine Eng.
M318-195S, M318-195-4
30644
(1562-4)
(1625-1)
EXH
V8
324ci/5.3L
3.250" Bore
30659
(1750-1)
30648
70648
(1625-1)
(1625-1N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
CHRYSLER MARINE (CONT'D)
V8
340ci/5.6L
4.040" Bore
V8
360ci/5.9L
4.000" Bore
V8
361ci/5.9L
4.125" Bore
INT
LM340B, LM340BD, M340 Models
EXH
INT
M360 Models
V8
400ci/6.6L
4.342" Bore
V8
413ci/6.7L
4.188" Bore
V8
426ci/7.0L
4.250" Bore
V8
440ci/7.2L
4.320" Bore
2.0060
1.750
.219
1.811
30673
70673
(1687-3)
(1687-3N)
1.6920
1.438
.250
1.517
30725
2.0060
1.625
.281
1.811
1.7550
1.500
.219
1.517
2.0060
1.750
.219
1.880
1.6245
1.322
.375
1.500
1.6300
1.313
.395
1.500
2.2555
1.938
.188
2.080
1.7550
1.500
.250
2.2555
1.938
.188
2.080
1.8810
1.625
.250
1.740
2.3800
2.000
.281
1.7550
1.500
.250
2.2555
1.938
.188
1.7550
1.500
.250
2.2555
1.938
.188
2.080
1.8810
1.625
.250
1.740
1.3800
1.125
.219
1.6920
1.312
.219
1.3170
1.046
.250
1.4440
1.188
.250
1.6920
1.312
.250
1.6300
1.313
.313
1.1921
0.875
.250
1.3175
1.000
.250
(2000-6)
EXH
INT
1961-73 Chrysler V8 Marine Eng.
M81, M81 Imperial, M361 Models
30658
70658
(1750-2)
(1750-2N)
30691
(2000-1)
EXH
V8
383ci/6.3L
4.250" Bore
30691
(2000-1)
EXH
INT
M260, M383B, M383BD Models
30855
70855
(1624E-1)
(1624E-1N)
30854
70854
(1625-20)
(1625-20N)
30989
(2250-1)
EXH
M280-4.3, M300, M335, M400 Models
INT
70659
(1750-1N)
30989
(2250-1)
EXH
INT
M413B, M413D, M413E Models
30659
(1750-1)
30682
70682
(1875-1)
(1875-1N)
30994
(2375-2)
EXH
INT
M426B, M426D Models
30659
70659
(1750-1)
(1750-1N)
30989
2.080
(2250-1)
EXH
M440, M440B, M440D, M440BD, M440S
Models
INT
30659
70659
(1750-1)
(1750-1N)
30989
(2250-1)
EXH
30682
70682
(1875-1)
(1875-1N)
CITROEN
L6
EXH
1948-60 All Models
30558
70558
(1375-1)
(1375-1N)
CLARK BROTHERS INDUSTRIAL
C, D, HR, HS Fuel Injection Insert
153
30736
70736
(1312-9)
(1312-9N)
31161
71161
(1437-5)
(1437-5N)
30675
70675
(1687-6)
(1687-6N)
30651
70651
(1625-10)
(1625-10N)
31352
71352
(1187-2)
(1187-2N)
31056
71056
(1312-4)
(1312-4N)
VALVE SEAT
70674
(1687-9N)
HMA, MA, TMB, TVM Fuel Injection Insert
OEM # 108-322-001 or 84588-D
HMA Fuel Injection Insert
OEM # 250-540-001 or 250-924-001
HR Fuel Inj. Insert, RA Insert, HRA Fuel Inj.,
HBAT Fuel Inj., HS Fuel Inj., HSRA Fuel Inj.,
TRA Fuel Injection Insert for Counterbored
1361 OEM # 328-260-001
HRA, HBAT, TRA, RA
Fuel Injection Insert
MA Series Fuel Injection Insert
(Oversized)
TVM Fuel Injection Insert
OEM # 290-050-001
30674
(1687-9)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
CONTINENTAL
L4
62ci
2.375" Bore
L4
69ci
2.500" Bore
L4
91ci/1.5L
2.875" Bore
L4
112ci/1.8L
3.188" Bore
L4
120ci/2.0L
3.188" Bore
L4
124ci/2.1L
3.000" Bore
L4
129ci/2.1L
3.250" Bore
INT
N62, N4062 Eng.
EXH
LY69, PY69, V4069, Y69, Y4069 Eng.
INT
EXH
INT
LY91, PY91, Y91, Y4091 Eng.
EXH
BY4112, PY112, Y112, Y4112 Eng.
INT
EXH
INT
1948-56 Z120 Eng.
EXH
1935-64 A4124, F124, F124 Dynatork, F4124,
F4124 Dynatork, LF124, PF124 Gas Eng.
OEM Exh. Seat w 1.203 vl. hd., .188 depth
LPG, Propane, Natural Gas (Lift Trucks),
same models as above
Alt. Exh. Seat for above w 1.328 vl. hd.,
.219 depth
Z129 Eng.
INT
EXH
EXH
INT
INT
INT
Z134 Eng.
EXH
INT
VALVE SEAT
G134 Eng.
EXH
L4
135ci/2.2L
3.125" Bore
L4
140ci/2.3L
3.188" Bore
INT
1935-64 F135 Eng.
LPG, Propane, Natural Gas (Lift Trucks)
same model as above
1935-64 F140, F4140, LF140, PF140 Eng.
Exh. Seat for above w 1.328 vl. hd.,
.219 depth
EXH
71600
(1000-1N)
30775
70775
(1312-1)
(1312-1N)
30754
70754
(1125-1)
(1125-1N)
30775
70775
(1312-1)
(1312-1N)
30754
70754
(1125-1)
(1125-1N)
30775
70775
(1312-1)
(1312-1N)
30754
70754
(1125-1)
(1125-1N)
30754
70754
(1125-1)
(1125-1N)
30754
70754
(1125-1)
(1125-1N)
30648
70648
(1625-1)
(1625-1N)
30786
70786
(1375-3)
(1375-3N)
0.750
.188
.890
1.0045
0.750
.188
.890
1.3190
1.062
.188
1.203
1.1300
0.875
.219
1.015
1.3190
1.062
.188
1.203
1.1300
0.875
.219
1.015
1.3190
1.062
.188
1.203
1.1300
0.875
.219
1.015
1.1300
0.875
.219
1.015
1.1300
0.875
.219
1.015
1.6300
1.375
.219
1.520
1.3800
1.063
.188
1.203
1.4425
1.188
.219
1.328
1.3800
1.125
.188
1.278
1.2560
1.000
.219
1.140
1.3800
1.125
.219
1.278
1.1920
1.000
.188
1.140
1.3800
1.125
.188
1.278
1.2560
1.000
.219
1.140
1.4425
1.219
.219
1.3190
1.062
.188
1.203
1.6300
1.375
.219
1.515
1.3800
1.063
.188
1.203
1.3800
1.063
.188
1.203
1.6300
1.375
.219
1.520
1.3800
1.063
.188
1.203
1.3800
1.063
.188
1.203
1.4425
1.188
.219
1.328
70786
31030
71030
(1437-3)
(1437-3N)
30790
70790
(1375-4)
(1375-4N)
31147
71147
(1250-1)
(1250-1N)
30558
70558
(1375-1)
(1375-1N)
31609
71609
(1187-1)
(1187-1N)
30790
70790
(1375-4)
(1375-4N)
31147
71147
(1250-1)
(1250-1N)
31031
71031
(1437-2)
(1437-2N)
30775
70775
(1312-1)
(1312-1N)
30648
70648
(1625-1)
(1625-1N)
30786
70786
(1375-3)
(1375-3N)
EXH
70786
(1375-3N)
INT
EXH
30648
70648
(1625-1)
(1625-1N)
30786
70786
(1375-3)
(1375-3N)
EXH
70786
(1375-3N)
EXH
154154
31600
(1000-1)
1.0045
(1375-3N)
EXH
L4
134ci/2.2L
3.625" Bore
71600
(1000-1N)
EXH
EXH
ZB129 Eng.
31600
(1000-1)
31030
71030
(1437-3)
(1437-3N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L4
145ci/2.4L
3.375" Bore
L4
157ci/2.6L
3.375" Bore
L4
162ci/2.6L
3.438" Bore
L4
163ci/2.7L
3.438" Bore
L4
176ci/2.9L
3.580" Bore
INT
Z145 Eng.
EXH
INT
G157 Gas & GD157 Diesel
EXH
1935-64 F162, F162A, F4162, F4162A, F4162C,
FA4162, FS162, LF162, PF162 Eng.
INT
EXH
EXH
Exh. Seat for above w 1.328 vl. hd.,
.219 depth
F163, F4163 Gas Eng.
EXH
L4
193ci/3.2L
3.750" Bore
INT
EXH
LPG, Propane, Natural Gas Eng.
EXH
31147
71147
(1250-1)
(1250-1N)
31031
71031
(1437-2)
(1437-2N)
30775
70775
(1312-1)
(1312-1N)
30648
70648
(1625-1)
(1625-1N)
30786
70786
(1375-3)
(1375-3N)
70786
1.3800
1.125
.188
1.278
1.2560
1.000
.219
1.140
1.4425
1.219
.219
1.3190
1.062
.188
1.203
1.6300
1.375
.219
1.520
1.3800
1.063
.188
1.203
1.3800
1.063
.188
1.203
EXH
31030
71030
(1437-3)
(1437-3N)
1.4425
1.188
.219
1.328
30648
70648
(1625-1)
(1625-1N)
1.6300
1.375
.219
1.515
31633
71633
(1348E-1)
(1348E-1N)
1.3480
1.087
.200
1.203
71633
1.3480
1.087
.200
1.203
1.3800
1.125
.219
1.203
1.4425
1.188
.219
1.328
1.3480
1.087
.200
1.203
1.3480
1.087
.200
1.203
1.3800
1.125
.219
1.203
1.6300
1.375
.219
1.520
1.4425
1.188
.219
1.328
1.8180
1.500
.250
1.641
1.4425
1.188
.219
1.328
1.4425
1.188
.219
1.328
1.3480
1.087
.200
1.203
1.3480
1.087
.200
1.203
1.3800
1.125
.219
1.203
1.6300
1.375
.219
1.520
1.3800
1.063
.188
1.203
1.3800
1.063
.188
1.203
1.4425
1.188
.219
1.328
(1348E-1N)
INT
1958-65 G176 Gas Eng.
EXH
INT
1938-64 F186, F6186 Eng.
EXH
INT
1960-73 G193, G4193 Gas Engs
EXH
EXH
155
31030
71030
(1437-3)
(1437-3N)
31633
71633
(1348E-1)
(1348E-1N)
71633
(1348E-1N)
30558
70558
(1375-1)
(1375-1N)
30648
70648
(1625-1)
(1625-1N)
31030
71030
(1437-3)
(1437-3N)
30672
70672
(1812-5)
(1812-5N)
31030
71030
(1437-3)
(1437-3N)
31030
71030
(1437-3)
(1437-3N)
31633
71633
(1348E-1)
(1348E-1N)
EXH
71633
(1348E-1N)
EXH
INT
1935-64 F199, F6199 Eng.
70558
(1375-1N)
EXH
30558
70558
(1375-1)
(1375-1N)
30648
70648
(1625-1)
(1625-1N)
30786
70786
(1375-3)
(1375-3N)
EXH
70786
(1375-3N)
EXH
31030
71030
(1437-3)
(1437-3N)
VALVE SEAT
(OEM Exh. Seat w 1.203 vl. hd., .200 depth)
30558
(1375-1)
INT
GF193 Gas Eng.
L4
199ci/3.3L
3.250" Bore
70790
(1375-4N)
(1375-3N)
LPG, Propane, Natural Gas Eng. same models EXH
as above
EXH
L6
186ci/3.0L
3.000" Bore
30790
(1375-4)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L4
201ci/3.3L
3.625" Bore
INT
1954-64 E201, ED201 Eng.
EXH
L6
202ci/3.3L
3.125" Bore
L4
208ci/3.4L
3.688" Bore
INT
D202, DS202, DS6202, OS202,
PD 202 Eng.
EXH
INT
1954-64 E208 Gas Eng.
EXH
L6
209ci/3.6L
3.188" Bore
1935-64 F209, F209A, F6209, F6209 Dynatork,
F6209A, PF209, 24B Eng.
L4
223ci/3.7L
3.813" Bore
1938-64 F226, F6226, FO6226, PF226 Gas Eng.
VALVE SEAT
L6
227ci/3.7L
3.312" Bore
incl. LPG, Propane, Natural Gas Eng - (use 70
31030
71030
(1437-3)
(1437-3N)
31031
71031
(1437-2)
(1437-2N)
30648
70648
(1625-1)
(1625-1N)
30786
70786
(1375-3)
(1375-3N)
30643
70643
(1562-1)
(1562-1N)
31030
71030
(1437-3)
(1437-3N)
71030
1.5680
1.312
.219
1.453
1.4425
1.188
.219
1.359
1.4425
1.219
.219
1.359
1.6300
1.375
.219
1.547
1.3800
1.063
.188
1.203
1.5680
1.312
.219
1.453
1.4425
1.188
.219
1.359
1.4425
1.188
.219
1.359
1.4425
1.219
.219
1.359
1.6300
1.375
.219
1.520
1.3800
1.063
.188
1.203
1.3800
1.063
.188
1.203
1.4425
1.188
.219
1.328
1.6920
1.406
.250
1.578
1.4425
1.188
.219
1.328
1.4425
1.188
.219
1.328
1.4425
1.219
.219
1.359
1.6300
1.375
.219
1.515
1.4425
1.188
.219
1.328
1.4425
1.188
.219
1.328
1.3800
1.063
.188
1.203
1.6300
1.375
.219
1.515
1.3480
1.087
.200
1.203
1.3800
1.125
.219
1.203
1.8180
1.500
.250
1.435
1.6300
1.313
.250
1.435
(1437-3N)
EXH
INT
EXH
31031
71031
(1437-2)
(1437-2N)
30648
70648
(1625-1)
(1625-1N)
30786
70786
(1375-3)
(1375-3N)
EXH
70786
(1375-3N)
EXH
EXH
31030
71030
(1437-3)
(1437-3N)
30670
70670
(1687-1)
(1687-1N)
31030
71030
(1437-3)
(1437-3N)
EXH
71030
(1437-3N)
EXH
INT
EXH
31031
71031
(1437-2)
(1437-2N)
30648
70648
(1625-1)
(1625-1N)
31030
71030
(1437-3)
(1437-3N)
EXH
71030
(1437-3N)
EXH
INT
F227, F6227 Eng.
70643
(1562-1N)
EXH
INT
E223, EB223 Gas Eng.
L6
226ci/3.7L
3.312" Bore
EXH
30643
(1562-1)
EXH
30786
70786
(1375-3)
(1375-3N)
30648
70648
(1625-1)
(1625-1N)
31633
71633
(1348E-1)
(1348E-1N)
series)
EXH
INT
H227 Gas Eng.
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
156156
30558
70558
(1375-1)
(1375-1N)
30672
70672
(1812-5)
(1812-5N)
30650
70650
(1625-3)
(1625-3N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L4
242ci/4.0L
3.875" Bore
INT
E242, E242-10 Gas Eng.
LPG, Propane, Natural Gas Eng.,
same model as above
L4
243ci/4.0L
3.750" Bore
EXH
EXH
INT
EXH
L6
244ci/4.0L
3.438" Bore
INT
A244, A6244 Eng.
EXH
INT
F244, FS244, F6244 Eng. Gas
EXH
EXH
Alt. Exh. Seat w .219 depth
L6
245ci/4.0L
3.438" Bore
INT
F245, F6245 Gas Eng.
incl. LPG, Propane, Natural Gas Eng - (use 70
31030
71030
(1437-3)
(1437-3N)
71030
1.6920
1.406
.250
1.578
1.4425
1.188
.219
1.359
1.4425
1.188
.219
1.328
1.4425
1.219
.219
1.359
1.8180
1.500
.250
1.435
1.6300
1.313
.250
1.435
1.6300
1.375
.219
1.515
1.5680
1.250
.250
1.359
1.7550
1.438
.250
1.4425
1.219
.219
1.6300
1.375
.219
1.515
1.3480
1.087
.200
1.203
1.3800
1.125
.219
1.203
1.6300
1.375
.219
1.515
1.3480
1.087
.200
1.203
1.3800
1.125
.219
1.203
2.0060
1.625
.281
1.6920
1.375
.250
1.8180
1.500
.250
1.453
1.6300
1.313
.250
1.453
1.6920
1.438
.250
1.5680
1.250
.219
1.515
2.0060
1.625
.297
1.766
1.6920
1.375
.250
1.516
1.8180
1.500
.250
1.453
1.6300
1.313
.250
1.453
1.6920
1.438
.250
1.5680
1.250
.219
(1437-3N)
EXH
HD243 Diesel Eng.
70670
(1687-1N)
EXH
INT
H243 Gas Eng.
30670
(1687-1)
EXH
31031
71031
(1437-2)
(1437-2N)
30672
70672
(1812-5)
(1812-5N)
30650
70650
(1625-3)
(1625-3N)
30648
70648
(1625-1)
(1625-1N)
30645
70645
(1562-7)
(1562-7N)
30656
70656
(1750-4)
(1750-4N)
31031
71031
(1437-2)
(1437-2N)
30648
70648
(1625-1)
(1625-1N)
31633
71633
(1348E-1)
(1348E-1N)
30558
70558
(1375-1)
(1375-1N)
30648
70648
(1625-1)
(1625-1N)
31633
71633
(1348E-1)
(1348E-1N)
series)
L6
253ci/4.1L
3.500" Bore
L4
260ci/4.3L
3.875" Bore
EXH
INT
M253, M6253, N253 Eng.
EXH
INT
H260 Gas Eng.
EXH
INT
1945-64 HD260 Diesel Eng.
L6
277ci/4.5L
4.000" Bore
1939-91 K271, K6271, M271, M6271, PM271
Eng.
INT
EXH
INT
H277 Gas Eng.
EXH
INT
1945-64 HD277 Diesel Eng.
EXH
30725
70725
(2000-6)
(2000-6N)
30678
70678
(1687-7)
(1687-7N)
30672
70672
(1812-5)
(1812-5N)
30650
70650
(1625-3)
(1625-3N)
30673
70673
(1687-3)
(1687-3N)
30640
70640
(1562-6)
(1562-6N)
30726
70726
(2000-3)
(2000-3N)
30678
70678
(1687-7)
(1687-7N)
30672
70672
(1812-5)
(1812-5N)
30650
70650
(1625-3)
(1625-3N)
30673
70673
(1687-3)
(1687-3N)
70640
(1562-6N)
157
1.515
VALVE SEAT
L6
271ci/4.4L
3.625" Bore
70558
(1375-1N)
EXH
30558
(1375-1)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L6
290ci/4.7L
3.750" Bore
L6
330ci/5.4L
4.000" Bore
L6
363ci/5.9L
4.000" Bore
L6
382ci/6.3L
1939-91 K6290, M290, M6290, PM290, 38B
Eng.
INT
EXH
1939-91 K6330, M330, M6230, M6330, PM330,
40B Eng.
INT
EXH
INT
M363 Eng.
EXH
INT
J382 Gas Eng.
OEM Exh. Seat # 73329
EXH
INT
JD382 Diesel
EXH
L6
572ci/9.4L
4.750" Bore
INT
RD572, RD6572 Diesel Eng.
EXH
9L, 14L, 15L, 18L, 20L, 24L, 26L, 28L,
29L, 30L, 32L, 34L, 37L Industrial Eng.
INT
30726
70726
(2000-3)
(2000-3N)
30678
70678
(1687-7)
(1687-7N)
30726
70726
(2000-3)
(2000-3N)
30678
70678
(1687-7)
(1687-7N)
30725
70725
(2000-6)
(2000-6N)
30678
70678
(1687-7)
(1687-7N)
30725
70725
(2000-6)
(2000-6N)
30920
70920
(1875-14)
(1875-14N)
31736
71736
(1875-13)
(1875-13N)
30679
70679
(1687-8)
(1687-8N)
31252
71252
(2250-2)
(2250-2N)
30729
70729
(2000-0)
(2000-0N)
31031
71031
(1437-2)
(1437-2N)
EXH
71031
2.0060
1.625
.297
1.766
1.6920
1.375
.250
1.516
2.0060
1.625
.297
1.766
1.6920
1.375
.250
1.516
2.0060
1.625
.281
1.6920
1.375
.250
2.0060
1.625
.281
1.8810
1.500
.313
1.8800
1.500
.219
1.6920
1.375
.313
2.2560
1.875
.281
2.0060
1.625
.375
1.4425
1.219
.219
1.4425
1.200/1.238
.219
1.5050
1.250
.219
1.5050
1.250
.219
2.1930
1.813
.281
2.0060
1.625
.281
1.1310
0.750
.250
1.7550
1.375
.250
1.8800
1.562
.250
1.7550
1.375
.250
1.8530
1.498
.273
1.772 30º
1.7220
1.357
.265
1.654
1.8800
1.500
.219
1.772 30º
1.7550
1.375
.219
1.654
(1437-2N)
8S, 14S, 15S, 16S, 17S, 18S, 19L, 21S
Industrial Eng.
INT
EXH
INT
U501, U6501 Industrial Eng.
EXH
30711
70711
(1500-1)
(1500-1N)
30711
70711
(1500-1)
(1500-1N)
31785
71785
(2187-2)
(2187-2N)
30725
70725
(2000-6)
(2000-6N)
GMW Fuel Injection Seat Insert for
Counterbored 1375. Industrial Eng.
GMW Fuel Injection Seat Insert for
Counterbored 1423. Industrial Eng.
GMW Air Starting Check Seat Insert,
Industrial Eng. OEM # GMWA-11A
GMWA, GMWC Fuel Injection Insert,
Industrial Eng.
VALVE SEAT
COOPER-BESSEMER (COOPER ENERGY)
31143
71143
(1125-10)
(1125-10N)
30653
70653
(1750-8)
(1750-8N)
30509
70509
(1875-2)
(1875-2N)
30653
70653
(1750-8)
(1750-8N)
CUMMINS
L4
239ci/3.9L
4.016" Bore
INT
1939-66 4B, 4BT, 4BTA
Diesel & Turbo-Diesel Eng.
EXH
Universal Insert for above applications
for heads w/o OEM seat
INT
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
158158
31734
71734
(1853E-1)
(1853E-1N)
31709
71709
(1722E-1)
(1722E-1N)
31738
71738
(1875-8)
(1875-8N)
30652
70652
(1750-7)
(1750-7N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
CUMMINS (CONT'D)
L4
309ci/5.1L
4.437" Bore
INT
C90, C105, C140, C309 Series
31640
71640
(1431E-1)
(1431E-1N)
EXH
71640
1.4305
1.156
.160
1.310
1.4305
1.156
.160
1.310
1.6905
1.438
.181
1.605
1.6905
1.438
.200
1.605
1.8530
1.498
.273
1.772 30º
1.7220
1.357
.265
1.654
1.8800
1.500
.219
1.772 30º
1.7550
1.375
.219
1.654
1.6905
1.438
.181
1.605
1.6905
1.438
.200
1.605
1.6920
1.375
.250
1.6920
1.375
.250
1.4305
1.156
.160
1.310
1.4305
1.156
.160
1.310
1.8465
1.563
.281
1.745
1.8465
1.563
.281
1.745
2.1305
1.750
.281
1.932
2.1305
1.750
.250
1.932
1.4305
1.156
.160
1.310
1.4305
1.156
.160
1.310
1.6905
1.438
.181
1.605
1.6905
1.438
.200
1.605
1.6905
1.438
.181
1.605
1.6905
1.438
.200
1.605
1.6905
1.438
.181
1.605
1.6905
1.438
.200
1.605
(1431E-1N)
V6
352ci/5.8L
4.625" Bore
L6
359ci/5.9L
4.01" Bore
V-352 Phase 3, 3.5D, 4, 5F
V6-140 Phase 2, 3, 3.5D, 4, 5F, E, 352,
352-HT Series Diesel Eng.
INT
EXH
INT
6B, 6BT, 6BTA Series
EXH
Universal size insert for above heads
w/o OEM insert
INT
EXH
V6
378ci/6.2L
4.625" Bore
L6
401ci/6.6L
4.125" Bore
V-378 Phase 5F, C, C-145, F-2, P,
P-145, 155, V6-155, 378-155 Series
Diesel Eng.
INT
EXH
INT
1939-66 A Series 2 Valve
Diesel Eng.
EXH
1939-66 J Series including JN, JNS, JT 2 Valve
Diesel Eng.
INT
EXH
L4
448ci/7.3L
4.875" Bore
INT
1932-73 N Series Diesel Eng.
EXH
INT
H Series Diesel Eng.
EXH
L6
464ci/7.6L
4.437" Bore
V8
555ci/8.3L
4.625" Bore
555 Series including V-555, V-555-A,
C, C-215, M, 200, 210, 225, 230, 240,
VC-555, VC-555-240, VT-555,
VT-555-C, C-230, C-240, C-250, M,
VTF-555, 225 Series including VT-225
Diesel Eng.
159
31703
71703
(1691E-2)
(1691E-2N)
31734
71734
(1853E-1)
(1853E-1N)
31709
71709
(1722E-1)
(1722E-1N)
31738
71738
(1875-8)
(1875-8N)
30652
70652
(1750-7)
(1750-7N)
31702
71702
(1691E-1)
(1691E-1N)
31703
71703
(1691E-2)
(1691E-2N)
30678
70678
(1687-7)
(1687-7N)
30678
70678
(1687-7)
(1687-7N)
31640
71640
(1431E-1)
(1431E-1N)
31640
71640
(1431E-1)
(1431E-1N)
31732
71732
(1847E-1)
(1847E-1N)
31732
71732
(1847E-1)
(1847E-1N)
31774
71774
(2125-10)
(2125-10N)
31776
71776
(2125-7)
(2125-7N)
31640
71640
(1431E-1)
(1431E-1N)
EXH
71640
(1431E-1N)
INT
EXH
INT
EXH
INT
EXH
31702
71702
(1691E-1)
(1691E-1N)
31703
71703
(1691E-2)
(1691E-2N)
31702
71702
(1691E-1)
(1691E-1N)
31703
71703
(1691E-2)
(1691E-2N)
31702
71702
(1691E-1)
(1691E-1N)
31703
71703
(1691E-2)
(1691E-2N)
VALVE SEAT
V8
504ci/8.3L
4.625" Bore
INT
71702
(1691E-1N)
V8
470ci/7.7L
4.625" Bore
C Series including C90, 105, 140, 160,
175, 180, 190, 190B, 195, 200, 240,
464, CS464, CT464 Diesel
& Turbo-Diesel Eng.
V-470, V-470 Phase 3.5D, 4, 470-D,
470-F, 470-HT, 470-M.
V8-185, V-185 Phase 3, 3.5D, 4, 5F,
185-C, E, HT Diesel Eng.
504 Series including V-504, V-504
Phase 5F, 504-C, C195, M, M-LH, P,
P-195, 52, 210. V8-210 Diesel Eng.
31702
(1691E-1)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
CUMMINS (CONT'D)
V6
588ci/9.6L
5.500" Bore
1961-73 V6R-180, V6E-195, V6-200, V6-200B,
INT
V6E-200, VT6-200, V6-215, V6-215M,
V6E-215M, V6-280, V6E-280, V6R-280,
EXH
VT6-280 Diesel & Turbo-Diesel Eng. 588 Series
including V-588, V-588-A OEM#3107759
and 127930 Diesel & Turbo-Diesel Eng.
(Alternate size for above applications)
INT
30700
70700
(2006E-1)
(2006E-1N)
70700
2.0060
1.688
.282
1.870
2.0060
1.688
.282
1.870
2.0030
1.688
.282
1.870
2.0030
1.688
.282
1.870
1.8120
1.450
.197
1.673 30º
1.8120
1.450
.197
1.673 30º
1.8465
1.563
.281
1.745
1.8465
1.563
.281
1.745
2.1305
1.750
.281
1.932
2.1305
1.750
.250
1.932
1.8465
1.563
.281
1.745
1.8465
1.563
.281
1.745
2.1305
1.750
.281
1.932
2.1305
1.750
.250
1.932
2.0060
1.688
.282
1.870
2.0060
1.688
.282
1.870
2.0030
1.688
.282
1.870
2.0030
1.688
.282
1.870
2.0060
1.688
.282
1.870
2.0060
1.688
.282
1.870
2.0030
1.688
.282
1.870
2.0030
1.688
.282
1.870
(2006E-1N)
31757
71757
(2003E-1)
(2003E-1N)
EXH
71757
(2003E-1N)
L6
611ci/10.0L
4.921" Bore
L-10, LT-10 Turbo Diesel, LTA-10 Turbo Diesel INT
Eng. Formula 240, 270, 300. Power Torque
240, 250, 270, 285, 300
EXH
31843
71843
(1812E-4)
(1812E-4N)
71843
(1812E-4N)
Note: Small I.D. to accommodate late style valves w
radius head
L6
672ci/11.0L
4.875" Bore
1932-73 N Series including NH-180, NH-195,
N-672. Diesel & Turbo-Diesel Eng.
OEM#69965
INT
31732
71732
(1847E-1)
(1847E-1N)
EXH
71732
(1847E-1N)
L6
743ci/12.2L
5.125" Bore
H Series including H-6, H-135, H-672,
HA, HB, HB-6, HBS, HMR, HR-672, HS,
HS-6, HS-672, HU-170, H6-1F.
N Series including N-743, NH, NH220
Series, NHS, RS, RT, RTM, RTO, NHE195
Series, NR, NS, NT, NTO262, NFT.
H Series including H-743, HR-743,
HR, HS Diesel & Turbo-Diesel Eng.
INT
31774
71774
(2125-10)
(2125-10N)
EXH
71776
(2125-7N)
INT
31732
71732
(1847E-1)
(1847E-1N)
EXH
71732
(1847E-1N)
INT
31774
71774
(2125-10)
(2125-10N)
EXH
71776
(2125-7N)
V8
785ci/12.8L
5.500" Bore
1961-73 V8-210, V8-235, V8E-235, V8E&R-240,
V8-265, V8-300, V8-300M, V8-350,
V8-370M, VT8-370, VT8-400, VT8-430,
V785, VT785 Diesel & Turbo-Diesel Eng.
(Alternate size for above applications)
INT
30700
70700
(2006E-1)
(2006E-1N)
EXH
70700
(2006E-1N)
INT
31757
71757
(2003E-1)
(2003E-1N)
EXH
71757
(2003E-1N)
VALVE SEAT
L6
855ci/14.0L
5.500" Bore
1961-73 N, NH, NT Series including
N14, NH230, NH230B, NHC230,
NHD230, NTC 230, Formula 230,
NH250, NH250B, NH250C, NH250P,
NHC250, NTC250, Formula 250, Super
250, NTC270CT, NT280, NTC280,
NTC290, Formula 290, Super 290,
NT300, Formula 300, NT310, NT330,
NT335, NTC335, NTC335B, NT350,
NTC350, Formula 350, NT420, N855
NT, NT88 Series Diesel & Turbo-Diesel Eng:
OEM Seat #127930
OEM Seat #3107759, 127930
INT
30700
70700
(2006E-1)
(2006E-1N)
EXH
70700
(2006E-1N)
INT
EXH
31757
71757
(2003E-1)
(2003E-1N)
71757
(2003E-1N)
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
160160
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
CUMMINS (CONT'D)
L6
855ci/14.0L
5.500" Bore
INT
OEM Seat #3054590, 3054600
Big Cam IV
30698
70698
(2000-15)
(2000-15N)
EXH
70698
2.0060
1.688
.219
1.870
2.0060
1.688
.219
1.870
2.0060
1.630
.280 1.875 15º&20º
2.0060
1.630
.280 1.875 15º&20º
2.0060
1.688
.282
1.870
2.0060
1.688
.282
1.870
2.0030
1.688
.282
1.870
2.0030
1.688
.282
1.870
2.0060
1.688
.234
1.875
2.0060
1.688
.234
1.875
2.0060
1.625
.313
1.870
(2000-15N)
OEM Seat #80610016, 90210014
High Heat, Natural Gas Applications
INT
(Use 70 series for standard duty, 90 series for
EXH
91829
(2006E-6C)
91829
(2006E-6C)
required extra HD Valve Seat Material)
V8
903ci/14.8L
5.500" Bore
903 Series including V903, V903M,
VT903, VT903M, VT300, 350, 400,
Diesel Turbo-Diesel Eng:
OEM Seat #127930
OEM Seat #3107759
INT
30700
70700
(2006E-1)
(2006E-1N)
EXH
70700
(2006E-1N)
INT
31757
71757
(2003E-1)
(2003E-1N)
EXH
71757
(2003E-1N)
VT903 Series Turbo-Diesel Applications
INT
30704
70704
(2006E-3)
(2006E-3N)
EXH
70704
(2006E-3N)
INT
OEM Intake Seat #212217
30727
70727
(2000-14)
(2000-14N)
KT6, KT19, KT450, KTA19, KTA525, KTA600, INT
KTC450, KTTA19 Diesel & Turbo Diesel Eng.
L6
1150ci/18.8L
6.250" Bore
(Use 70 series for standard duty, 90 series for
91844
EXH
1.930
.323
2.220 30º
91845
2.3810
2.030
.323
2.220 30º
(2381E-2C)
required extra HD Valve Seat Material)
V12
1486ci/28.0L
5.125" Bore
2.3810
(2381E-1C)
1961-73 V, VT, VTA, VTR, V12 Series including:
VT12R-600, VT12-700, VT-1710,
VTA-1710, VTR-1710 Diesel & Turbo
Diesel Eng, High Heat Appl.
N, GNVH450, V1486, VT1486, VT600
Series Diesel Turbo-Diesel Eng.
INT
70700
2.0060
1.688
.282
1.870
2.0060
1.688
.282
1.870
1.8465
1.563
.281
1.745
1.8465
1.563
.281
1.745
2.0060
1.688
.282
1.870
2.0060
1.688
.282
1.870
2.0030
1.688
.282
1.870
2.0030
1.688
.282
1.870
1.4410
1.203
.215
1.400 30º
1.4410
1.203
.215
1.400 30º
1.1610
0.910
.222
1.093 30º
1.1610
0.910
.222
1.093 30º
(2006E-1N)
EXH
70700
(2006E-1N)
INT
71732
(1847E-1N)
EXH
71732
(1847E-1N)
V12
1710ci/24.4L
5.500" Bore
VT-12, 1710 Series including V-1710,
VT-1710,VTA-1710, VTR-1710
Phase 1-3 Diesel Turbo-Diesel Eng:
OEM Seat #127930
OEM Seat #3107759, 127930
INT
EXH
INT
EXH
30700
70700
(2006E-1)
(2006E-1N)
30700
70700
(2006E-1)
(2006E-1N)
31757
71757
(2003E-1)
(2003E-1N)
31757
71757
(2003E-1)
(2003E-1N)
DETROIT DIESEL
2 Cyl
106ci/1.7L
3.875" Bore
INT
2-53, 2-53N Eng. 2 valve head
O.E.M. Int. & Exh. Seat #5116196
EXH
4 valve head
O.E.M. Int. & Exh. Seat #5116361 &
#8921502
161
INT
EXH
31641
71641
(1441E-1)
(1441E-1N)
31641
71641
(1441E-1)
(1441E-1N)
31608
71608
(1161E-1)
(1161E-1N)
31608
71608
(1161E-1)
(1161E-1N)
VALVE SEAT
DATSUN (SEE NISSAN)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
2 Cyl
142ci/2.3L
4.250" Bore
2-71 Eng. 2 valve head
O.E.M. Int. & Exh. Seat #5131096 &
#8927920
INT
EXH
INT
4 valve head
EXH
L3
159ci/2.6L
3.875" Bore
INT
3-53, 3-53N Eng. 2 valve head
EXH
4 valve head
O.E.M. Int. & Exh. Seat #5116361 &
#8921502
L4
212ci/3.5L
3.875" Bore
4-53, 4-53N, 4-53T Eng. 2 valve head
EXH
INT
EXH
4 valve head
O.E.M. Int. & Exh. Seat #5116361 &
#8921502
L3
213ci/3.5L
4.250" Bore
INT
3-71 Eng. 2 valve head
O.E.M. Int. & Exh. Seat #5131096 &
#8927920
INT
EXH
INT
EXH
INT
4 valve head
EXH
L4
284ci/4.7L
4.250" Bore
4-71, 4-71E, 4-71T Eng.
2 valve head O.E.M. Int. & Exh. Seat
#5131096 & #8927920
INT
EXH
INT
4 valve head
VALVE SEAT
EXH
V6
318ci/5.2L
3.875" Bore
INT
6V-53, 6V-53N Eng. 2 valve head
EXH
4 valve head
O.E.M. Int. & Exh. Seat #5116361 &
#8921502
L6
426ci/7.0L
4.250" Bore
6-71, 6-71N, 6-71SE, 6-71T Eng.
2 valve head. O.E.M. Int. & Exh. Seat
#5131096 & #8927920
INT
EXH
INT
31680
71680
(1628E-2)
(1628E-2N)
31680
71680
(1628E-2)
(1628E-2N)
31621
71621
(1262E-1)
(1262E-1N)
31621
71621
(1262E-1)
(1262E-1N)
31641
71641
(1441E-1)
(1441E-1N)
31641
71641
(1441E-1)
(1441E-1N)
31608
71608
(1161E-1)
(1161E-1N)
31608
71608
(1161E-1)
(1161E-1N)
31641
71641
(1441E-1)
(1441E-1N)
31641
71641
(1441E-1)
(1441E-1N)
31608
71608
(1161E-1)
(1161E-1N)
31608
71608
(1161E-1)
(1161E-1N)
31680
71680
(1628E-2)
(1628E-2N)
31680
71680
(1628E-2)
(1628E-2N)
31621
71621
(1262E-1)
(1262E-1N)
31621
71621
(1262E-1)
(1262E-1N)
31680
71680
(1628E-2)
(1628E-2N)
31680
71680
(1628E-2)
(1628E-2N)
31621
71621
(1262E-1)
(1262E-1N)
31621
71621
(1262E-1)
(1262E-1N)
31641
71641
(1441E-1)
(1441E-1N)
31641
71641
(1441E-1)
(1441E-1N)
31608
71608
(1161E-1)
(1161E-1N)
31608
71608
(1161E-1)
(1161E-1N)
31680
71680
(1628E-2)
(1628E-2N)
EXH
71680
1.6280
1.344
.250
1.588 30º
1.6280
1.344
.250
1.588 30º
1.2620
0.975
.250
1.180 30º
1.2620
0.975
.250
1.180 30º
1.4410
1.203
.215
1.400 30º
1.4410
1.203
.215
1.400 30º
1.1610
0.910
.222
1.093 30º
1.1610
0.910
.222
1.093 30º
1.4410
1.203
.215
1.400 30º
1.4410
1.203
.215
1.400 30º
1.1610
0.910
.222
1.093 30º
1.1610
0.910
.222
1.093 30º
1.6280
1.344
.250
1.588 30º
1.6280
1.344
.250
1.588 30º
1.2620
0.975
.250
1.180 30º
1.2620
0.975
.250
1.180 30º
1.6280
1.344
.250
1.588 30º
1.6280
1.344
.250
1.588 30º
1.2620
0.975
.250
1.180 30º
1.2620
0.975
.250
1.180 30º
1.4410
1.203
.215
1.400 30º
1.4410
1.203
.215
1.400 30º
1.1610
0.910
.222
1.093 30º
1.1610
0.910
.222
1.093 30º
1.6280
1.344
.250
1.588 30º
1.6280
1.344
.250
1.588 30º
1.2620
0.975
.250
1.180 30º
1.2620
0.975
.250
1.180 30º
(1628E-2N)
INT
4 valve head incl. Turbo
EXH
31621
71621
(1262E-1)
(1262E-1N)
71621
(1262E-1N)
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
162162
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8
501ci/8.2L
4.252" Bore
V6
552ci/9.0L
4.840" Bore
V6
568ci/9.3L
4.250" Bore
501 Fuel Pincher Diesel. Repair insert
INT
EXH
INT
6V92, 6V92N Eng.
EXH
8V-71, 8V-71N, 8V-71NE, 8V-71T Eng.
#5131096 & #8927920
INT
31748
71748
(1937-12)
(1937-12N)
30891
70891
(1750-12)
(1750-12N)
31380
71380
(1442E-1)
(1442E-1N)
31380
71380
(1442E-1)
(1442E-1N)
31680
71680
(1628E-2)
(1628E-2N)
EXH
71680
1.9425
1.578
.203
1.811 30º
1.7550
1.438/1.610
.203
1.665
1.4421
1.125
.250
1.380 30º
1.4421
1.125
.250
1.380 30º
1.6280
1.344
.250
1.588 30º
1.6280
1.344
.250
1.588 30º
1.2620
0.975
.250
1.180 30º
1.2620
0.975
.250
1.180 30º
1.8195
1.571
.283
1.732 30º
1.6285
1.357
.249
1.576 30º
1.4421
1.125
.250
1.380 30º
1.4421
1.125
.250
1.380 30º
1.8195
1.571
.283
1.732 30º
1.6285
1.357
.249
1.576 30º
1.6280
1.344
.250
1.588 30º
1.6280
1.344
.250
1.588 30º
1.2620
0.975
.250
1.180 30º
1.2620
0.975
.250
1.180 30º
1.4421
1.125
.250
1.380 30º
1.4421
1.125
.250
1.380 30º
1.6280
1.344
.250
1.588 30º
1.6280
1.344
.250
1.588 30º
1.2620
0.975
.250
1.180 30º
1.2620
0.975
.250
1.180 30º
1.4421
1.125
.250
1.380 30º
1.4421
1.125
.250
1.380 30º
(1628E-2N)
INT
31621
71621
(1262E-1)
(1262E-1N)
EXH
71621
(1262E-1N)
L6
677ci/11.1L
5.118" Bore
V8
736ci/12.1L
4.840" Bore
INT
60 Series 60TA Eng.
O.E.M. Int. Seat #8929127
O.E.M. Exh. Seat #8929126
EXH
INT
8V-92, 8V-92N, 8V-92T Eng.
31729
71729
(1819E-1)
(1819E-1N)
31682
71682
(1628E-3)
(1628E-3N)
31380
71380
(1442E-1)
(1442E-1N)
EXH
71380
(1442E-1N)
L6
775ci/12.7L
5.118" Bore
V12
852ci/14.0L
4.250" Bore
INT
60 Series 12.7L Eng.
O.E.M. Int. Seat #8929127
O.E.M. Exh. Seat #8929126
EXH
12V-71, 12V-71N Eng.
#5131096 & #8927920
INT
EXH
INT
31729
71729
(1819E-1)
(1819E-1N)
31682
71682
(1628E-3)
(1628E-3N)
31680
71680
(1628E-2)
(1628E-2N)
31680
71680
(1628E-2)
(1628E-2N)
31621
71621
(1262E-1)
(1262E-1N)
EXH
71621
(1262E-1N)
V12
1104ci/18.1L
4.840" Bore
EXH
16V-71 Eng.
#5131096 & #8927920
INT
EXH
71380
(1442E-1N)
31380
71380
(1442E-1)
(1442E-1N)
31680
71680
(1628E-2)
(1628E-2N)
31680
71680
(1628E-2)
(1628E-2N)
31621
71621
(1262E-1)
(1262E-1N)
EXH
71621
(1262E-1N)
V16
1472ci/24.1L
4.840" Bore
INT
16V-92 Eng.
EXH
DODGE (SEE CHRYSLER)
163
31380
71380
(1442E-1)
(1442E-1N)
31380
71380
(1442E-1)
(1442E-1N)
VALVE SEAT
INT
31380
(1442E-1)
V16
1136ci/18.6L
4.250" Bore
INT
12V-92, 12V-92N Eng.
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
FAIRBANKS - MORSE
1 Cyl
INT
ZC52 Eng. (3 h.p.)
EXH
1 Cyl
INT
Z Eng. (5 h.p.)
EXH
1 Cyl
118ci/1.9L
5.000" Bore
1 Cyl
208ci/3.4L
5.750" Bore
1 Cyl
346ci/5.7L
7.000" Bore
1 Cyl
503ci/8.2L
8.000" Bore
FM118, TZC118, ZC118 Eng. (7 h.p.)
INT
EXH
INT
ZC208 Eng. (9 h.p.)
EXH
ZC346 Eng. (12 h.p.)
Late Head w 2 Intake Valves
INT
ZC503 Eng. (17 h.p.)
Late Head w 2 Intake Valves
INT
31159
71159
(1437-3)
(1437-3N)
30790
70790
(1375-4)
(1375-4N)
30725
70725
(2000-6)
(2000-6N)
30725
70725
(2000-6)
(2000-6N)
30724
70724
(2000-13)
(2000-13N)
30724
70724
(2000-13)
(2000-13N)
30994
70994
(2375-2)
(2375-2N)
30994
70994
(2375-2)
(2375-2N)
30994
70994
(2375-2)
(2375-2N)
30994
70994
(2375-2)
(2375-2N)
1.4440
1.188
.219
1.3800
1.125
.188
2.0060
1.625
.281
2.0060
1.625
.281
2.0060
1.625
.250
2.0060
1.625
.250
2.3820
2.000
.281
2.3820
2.000
.281
2.3820
2.000
.281
2.3820
2.000
.281
1.5050
1.140/1.250
.325
1.423
1.3195
1.070
.330
1.223
1.5050
1.140/1.250
.325
1.420
1.3195
1.070
.330
1.223
1.7550
1.375
.250
1.635
1.5050
1.250
.250
1.415
1.5050
1.140/1.250
.325
1.420
1.3195
1.070
.330
1.223
1.7550
1.375
.250
1.635
1.5050
1.250
.250
1.415
1.7550
1.375
.250
1.635
1.5050
1.250
.250
1.415
1.7550
1.375
.250
1.635
1.5050
1.250
.250
1.415
1.7550
1.375
.250
1.635
1.5050
1.250
.250
1.415
FIAT
L4
1116cc/1.1L
3.150"(80mm) Bore
INT
1971-73 128A, 128A.000 Eng.
128 Sedan, Wagon
30105
(1500-65)
EXH
31631
(1312-54)
L4
1290cc/1.3L
3.385"(86mm) Bore
INT
1972-79 128A.1000, 128AS Eng.
128, 128SL, X1/9, X19
30105
(1500-65)
EXH
31631
(1312-54)
L4
1438cc/1.4L
3.150"(80mm) Bore
INT
1969-70 SOHC 124AC, 124S Eng.
124, 124S Coupe, Spyder
30653
(1750-8)
EXH
30712
(1500-3)
L4
1498cc/1.5L
3.402"(86.4mm) Bore
INT
1979-83 138A-2, 138A.2000 Eng.
Strada, X1/9
30105
(1500-65)
EXH
31631
VALVE SEAT
(1312-54)
L4
1592cc/1.6L
3.150"(84mm) Bore
INT
1973-74 SOHC 132AB.1A.0, 132AC Eng.
124 Special, TC, TC4
30653
(1750-8)
EXH
30712
(1500-3)
L4
1608cc/1.6L
3.150"(80mm) Bore
INT
1971-74 SOHC 125 BC Eng.
124, 124S Coupe, Spyder
30653
(1750-8)
EXH
30712
(1500-3)
L4
1756cc/1.8L
3.307"(84mm) Bore
1974-78 SOHC 131AC, 132AB.1A.0, 132AC.1C
Eng. 124-131 Coupe, Brava,
Mirafiori, Spyder
INT
30653
(1750-8)
EXH
30712
(1500-3)
L4
1995cc/2.0L
3.307"(84mm) Bore
INT
1979-85 SOHC 132AC.1C, 132AZ, 132C3,
132D, 132DB.2.A.0. Eng.
Brava, Spyder 2000
30653
(1750-8)
EXH
30712
(1500-3)
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
164164
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
FORD INDUSTRIAL
L4
134ci/2.2L
3.438" Bore
1953-78 134, 134E, 134G, E134, JE, B8PE Eng.
Ford Industrial & Tractor
INT
30672
70672
(1812-5)
(1812-5N)
EXH 30857+6
70857+6
1.8180
1.500
.250
1.647
1.6360
1.348
.218
1.510
1.8180
1.500
.250
1.647
1.6360
1.348
.218
1.510
1.8180
1.500
.250
1.647
1.6300
1.375
.219
1.510
1.7550
1.500
.219
1.649
1.4425
1.219
.219
1.390
1.8180
1.563
.219
1.753
1.8180
1.500/1.625
.219
1.780
1.6300
1.334
.313
1.510
1.8180
1.500/1.625
.219
1.780
1.6300
1.375
.219
1.560
1.8180
1.500/1.625
.219
1.780
1.6300
1.334
.313
1.510
1.7550
1.438
.219
1.647
1.5680
1.312/1.390
.250
1.510
2.0060
1.750
.219
1.925
1.8180
1.500/1.625
.219
1.780
1.6925
1.344
.313
1.560
1.6920
1.375
.219
1.560
1.8150
1.595
.250
1.753
1.6300
1.334
.313
1.505
1.8800
1.562
.250
1.753
1.6925
1.344
.313
1.508
2.1300
1.812
.250
1.6300
1.334
.313
1.8150
1.595
.250
1.753
1.6300
1.334
.313
1.505
(1625-11+.006) (1625-11N+.006)
L4
172ci/2.8L
3.900" Bore
1955-78 172, D, DD, D172, B8PD Gas Eng.
172, 172G, 172DF, 172GF, B172
Diesel Eng. Ford Industrial & Tractor
INT
30672
70672
(1812-5)
(1812-5N)
EXH 30857+6
70857+6
(1625-11+.006) (1625-11N+.006)
L4
192ci/3.1L
4.130" Bore
L6
200ci/3.3L
3.680" Bore
1972-78 192, 192D, 192GF Gas & Diesel Eng.
EXH
INT
1963-83 200 GF, GP, LS633 Eng.
EXH
INT
L6
223ci/3.6L
3.625" Bore
L6
240ci/3.9L
4.000" Bore
L6
262ci/4.3L
3.719" Bore
V8
292ci/4.8L
3.750" Bore
INT
1953-67 F, JA, JF, JF-5, B6PF Eng.
EXH
INT
1965-74 240GF, C5PF Eng.
EXH
INT
1961-67 262, 262G, C1PG Eng.
EXH
INT
1958-63 K, K292, B8PK
EXH
INT
L6
300ci/4.9L
4.000" Bore
INT
1965-76 300GF, C5PG, C5G649
EXH
OEM Factory Installed Exhaust Seat
EXH
Replacement Exhaust Seat
INT
70672
(1812-5N)
30648
70648
(1625-1)
(1625-1N)
30658
70658
(1750-2)
(1750-2N)
31031
71031
(1437-2)
(1437-2N)
30667
70667
(1812-4)
(1812-4N)
30530
70530
(1812-3)
(1812-3N)
30642
70642
(1630E-1)
(1630E-1N)
30530
70530
(1812-3)
(1812-3N)
30648
70648
(1625-1)
(1625-1N)
30530
70530
(1812-3)
(1812-3N)
30642
70642
(1630E-1)
(1630E-1N)
30655
70655
(1750-3)
(1750-3N)
30503
70503
(1562-2)
(1562-2N)
30691
70691
(2000-1)
(2000-1N)
30530
70530
(1812-3)
(1812-3N)
30559
70559
(1687-4)
(1687-4N)
30677
70677
(1687-5)
(1687-5N)
31725
71725
(1815E-1)
(1815E-1N)
EXH
70642
(1630E-1N)
INT
30509
70509
(1875-2)
(1875-2N)
EXH
70559
(1687-4N)
V8
332ci/5.4L
3.800" Bore
INT
1956-67 L, L332, B6PL Eng.
30557
70557
(2125-1)
(2125-1N)
EXH
70642
(1630E-1N)
V8
361ci/5.9L
4.050" Bore
INT
1964-76 361GF, C4PB, C5PB Eng.
EXH
31725
71725
(1815E-1)
(1815E-1N)
70642
(1630E-1N)
165
VALVE SEAT
1964-76 330 MD (Medium-Duty), 330HD (HeavyDuty), C4PA, C4PD, C4PG, C5PD Eng.
30672
(1812-5)
V8
330ci/5.4L
3.875" Bore
INT
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
FORD INDUSTRIAL (CONT'D)
V8
361ci/5.9L
4.050" Bore
INT
30509
70509
(1875-2)
(1875-2N)
1.8800
1.562
.250
1.753
1.6925
1.344
.313
1.508
1.8150
1.595
.250
1.753
1.6300
1.334
.313
1.505
1.8800
1.562
.250
1.753
1.6925
1.344
.313
1.508
2.2200
1.843
.312
2.020
1.7421
1.457
.315
1.635
1.8150
1.595
.250
1.753
70642
1.6300
1.334
.313
1.505
30509
70509
1.8800
1.562
.250
1.753
(1875-2)
(1875-2N)
1.6925
1.344
.313
1.508
2.2555
1.938
.188
2.083
1.6300
1.313
.250
1.508
2.0680
1.813
.188
1.978
1.7550
1.500
.219
1.654
1.7810
1.476
.311
1.654
1.8180
1.468
.313
1.654
2.2200
1.843
.312
2.020
1.7421
1.457
.315
1.635
2.2200
1.843
.312
2.020
1.7421
1.457
.315
1.635
EXH
70559
(1687-4N)
V8
391ci/6.4L
4.050" Bore
INT
1964-76 391GF, C4PC, C5PC
31725
71725
(1815E-1)
(1815E-1N)
EXH
70642
(1630E-1N)
INT
30509
70509
(1875-2)
(1875-2N)
EXH
70559
(1687-4N)
V8
401ci/6.6L
4.125" Bore
V8
428ci/7.0L
4.130" Bore
1958-70 401DF, 401DFT, BSD666, BSD666T,
B8PQ, M, N, Q Ford Industrial & Tractor
OEM Int. Seat #B8TZ-6057T
OEM Exh. Seat #B8QH-6057A
428GI Eng.
INT
EXH
INT
31786
71786
(2220E-1)
(2220E-1N)
31086
71086
(1744E-1)
(1744E-1N)
31725
71725
(1815E-1)
(1815E-1N)
EXH
INT
EXH
70559
(1687-4N)
V8
460ci/7.5L
4.360" Bore
INT
1976-96 460GM, 460GP, LSG875 Eng.
30989
70989
(2250-1)
(2250-1N)
EXH
(OEM Intake and Exhaust Insert Sizes)
70650
(1625-3N)
INT
31770
71770
(2062-30)
(2062-30N)
EXH
70658
(1750-2N)
EXH
71257
(1781E-1N)
EXH
70680
(1812-21N)
VALVE SEAT
V8
477ci/7.8L
4.500" Bore
V8
534ci/8.8L
4.500" Bore
1958-71 477GF, B8PM, LSG878, M, Q Eng.
1958-70 534GF, B8PN, LSG888, N, Q Eng.
INT
EXH
INT
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
166166
31786
71786
(2220E-1)
(2220E-1N)
31086
71086
(1744E-1)
(1744E-1N)
31786
71786
(2220E-1)
(2220E-1N)
31086
71086
(1744E-1)
(1744E-1N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
FORD PASSENGER CAR
L4
81ci/1324cc/1.3L
2.795" (71mm) Bore
INT
1988-98 SOHC Mazda Eng.
Festiva/Aspire
31064
1.3820
1.000
.280
1.261
1.2570
.910
.285
1.103
1.2570
0.976
.180
1.220
1.0690
.790
.260
1.031
1.6320
1.329
.280
1.476
1.4445
1.120
.300
1.259
1.4440
1.250
.219
1.417
1.3800
1.125
.219
1.240
1.7550
1.438/1.500
.302
1.654
1.5680
1.220/1.356
.344
1.457
1.5670
1.375
.250
1.502
1.3800
1.125
.219
1.239
1.7570
1.410/1.560
.315
1.657
1.5050
1.100/1.225
.316
1.295
1.2560
1.000
.219
1.181
1.1320
0.830
.240
.984
1.4445
1.162
.230
1.298
1.2570
0.905/1.000
.230
1.103
1.7550
1.438/1.500
.302
1.654
1.5695
1.220/1.356
.344
1.457
1.7550
1.438/1.500
.302
1.654
1.5695
1.220/1.356
.344
1.457
1.6310
1.320
.300
1.535
1.4440
1.105
.322
1.339
1.5690
1.315
.270
1.534
1.3820
1.100
.300
1.340
1.7550
1.438/1.500
.302
1.654
1.5695
1.220/1.356
.344
1.457
(1375-64)
EXH
31054
(1250-52)
L4
97.4ci/1588cc/1.6L
3.147" (78mm) Bore
1990-94 DOHC 16 valve, includes Turbo Eng.
Mercury Capri
INT
31614
(1250-61)
EXH
31047
(1062-50)
L4
97.4ci/1597cc/1.6L
3.150" (79.9mm) Bore
INT
Mercury Tracer, Laser
30860
(1625-54)
EXH
31647
(1437-66)
L4
97.4ci/1598cc/1.6L
3.188"(81mm) Bore
INT
1978-80 F Series (England) Eng.
Ford Festiva
30556
(1437-1)
EXH
30558
(1375-1)
L4
98ci/1599cc/1.6L
3.149"(79.9mm) Bore
1981-85 SOHC Eng. (Includes Turbo)
Hemi Head & HS Series. Exp, Ford
Escort, LN7; Mercury Lynx
INT
31117
(1750-60)
EXH
31292
(1562-54)
L4
98ci/1599cc/1.6L
3.189" Bore
INT
1971-73 OHV W Series (England) Eng.
Ford Pinto, Mercury Capri
31486
(1562-5)
EXH
30558
(1375-1)
L4
110ci/1797cc/1.8L
3.071" (78mm) Bore
INT
1972-80 SOHC Mazda VB Eng.
Ford Courier Truck
30165
(1750-63)
EXH
30045
(1500-57)
L4
112.2ci/1839cc/1.8L
3.268" (83mm) Bore
1990-95 SOHC Mazda 8 Valve BP012, BP-ZD
Eng.
INT
31147
(1250-1)
EXH
31603
(1125-55)
1990-99 DOHC 16 valve BP-ZE Mazda Eng.
Ford Escort; Mercury Tracer
INT
31650
(1437-74)
EXH
30230
(1250-56)
L4
116ci/1900cc/1.9L
3.226" Bore
INT
EXH
INT
71292
(1562-54N)
31117
(1750-60)
EXH
INT
31292
71292
(1562-54)
(1562-54N)
31223
(1625-62)
EXH
INT
EXH
INT
1987-90 SOHC (Hemi Combustion)
Ford Escort
31292
(1562-54)
30806
70806
(1437-65)
(1437-65N)
31138
31139
71139
(1375-62)
(1375-62N)
31117
(1750-60)
EXH
167
31292
71292
(1562-54)
(1562-54N)
VALVE SEAT
1985-96 SOHC Vin 9 Series Eng. including EFI
(1987-90) and Hi-Output(1994). Includes
1995-96 Mexican built only. Ford
Escort, EXP; Mercury Lynx
1987-96 SOHC Vin J Series with CFI (1987-90)
and EFI (1991-96). Includes 1995
U.S. Built only. Ford Escort, Mercury
Lynx, Tracer
1987-89 SOHC ( Cam w/Roller)
Ford Escort
31117
(1750-60)
L4
116ci/1900cc/1.9L
3.575" Bore
1985-90 SOHC Eng. Hemi Head & HS Series.
Ford Escort, Mercury Lynx
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
FORD PASSENGER CAR (CONT'D)
L4
121ci/1970cc/2.0L
3.150" (80mm) Bore
1979-84 SOHC Type A, C, MA, MB Mazda Eng.
Ford Courier Truck
INT
30165
1.7570
1.410/1.560
.315
1.657
1.5050
1.100/1.225
.316
1.295
1.7550
1.438
.219
1.654
1.5050
1.250
.219
1.417
1.6940
1.335
.275
1.614
1.5070
1.182
.275
1.417
1.3820
1.102/1.160
.260
1.280
1.4445
1.175
.260
1.339
1.8180
1.500
.219
1.735
1.5680
1.313
.188
1.500
1.8180
1.500
.219
1.735
1.5680
1.312
.219
1.500
1.8180
1.500
.219
1.735
1.5680
1.312
.219
1.500
1.5680
1.312
.219
1.468
1.3800
1.125
.188
1.268
1.8180
1.500
.219
1.735
1.5680
1.313
.188
1.500
1.6920
1.438
.219
1.570
1.3800
1.125
.219
1.269
1.6300
1.375
.219
1.531
1.3800
1.125
.188
1.268
1.7550
1.500
.219
1.651
1.4425
1.188
.219
1.390
1.6920
1.438
.219
1.570
1.3800
1.125
.219
1.269
1.7550
1.500
.219
1.656
1.5050
1.250
.219
1.418
(1750-63)
EXH
30045
(1500-57)
L4
122ci/1993cc/2.0L
3.575" Bore
INT
1971-74 SOHC Ford Eng.
Ford Pinto; Mercury Bobcat, Capri
30655
(1750-3)
EXH
30711
(1500-1)
L4
122ci/1998cc/2.0L
3.386" (86mm) Bore
L4
133ci/2184cc/2.2L
3.386" (86mm) Bore
L4
140ci/2.3L
3.680" Bore
L4
140ci/2298cc/2.3L
3.780" Bore
1984-87 SOHC Mazda Diesel Eng.
Ford Escort, Tempo; Mercury Lynx,
Topaz
1989-92 SOHC Vin A Series 12 valve Mazda
Eng. incl. Turbo. Ford Probe
INT
EXH
INT
INT
71668
(1500-72N)
30238
31651
71651
(1437-75)
(1437-75N)
30668
(1812-2)
EXH
INT
1974-93 SOHC Non Turbo
Ford Fairmont, Mustang, Pinto
Mercury Capri, Cougar, Zephyr
31668
(1500-72)
(1375-56)
EXH
1984-94 SOHC w Carb, Fuel Injection. - H.S.C.
Ford Tempo; Mercury Topaz
31705
(1687-57)
30840
70840
(1562-36)
(1562-36N)
30668
(1812-2)
EXH
30643
(1562-1)
1983-88 SOHC Turbo
Ford SVO Mustang; Mercury Merkur
XR4Ti, Capri, Cougar, Zephyr
L6
144ci/2.4L
3.500" Bore
1960-64 OHV Ford Eng.
Ford Falcon, Ranchero; Ford Truck/
Van; Mercury Comet
INT
30668
(1812-2)
EXH
INT
30643
70643
(1562-1)
(1562-1N)
30643
(1562-1)
EXH
30790
(1375-4)
L4
153ci/2.5L
3.680" Bore
V6
159ci/2550cc/2.6L
3.543" Bore
INT
1986-91 SOHC - H.S.C. Eng.
Ford Contour, Probe, Taurus;
Mercury Mystique, Sable
EXH
INT
1972-73 OHV Ford Eng.
Mercury Capri
30668
70668
(1812-2)
(1812-2N)
30840
70840
(1562-36)
(1562-36N)
30664
(1687-2)
EXH
30558
VALVE SEAT
(1375-1)
L6
170ci/2.8L
3.500" Bore
INT
1961-64 OHV Ford Truck/Van Eng.
Ford Fairlane, Falcon, Ranchero;
Mercury Comet, Meteor
30648
(1625-1)
EXH
30790
(1375-4)
INT
1965-72 OHV Eng.
Ford Bronco, Falcon, Maverick,
Mustang; Mercury Comet
30658
(1750-2)
EXH
31030
(1437-3)
V6
171ci/2792cc/2.8L
3.661" (93mm) Bore
INT
1974-79 OHV Ford Eng. Ford Mustang II,
Mercury Bobcat, Capri 2800
30664
(1687-2)
EXH
30558
(1375-1)
V6
177ci/2934cc/2.9L
3.661" (93mm) Bore
INT
1986-92 German-Ford Eng.
Ford; Mercury Merkur-Scorpio
30658
(1750-2)
EXH
30711
(1500-1)
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
168168
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L4
177ci/2.9L
3.750" Bore
INT
1909-27 Model T
30649
1.6300
1.313
.219
1.6300
1.313
.219
1.7570
1.460
.275
1.657
1.5070
1.180/1.240
.305
1.382
1.4425
1.219
.219
1.378
1.3170
1.000
.219
1.180
1.7550
1.500
.219
1.661
1.4425
1.219
.219
1.371
1.4425
1.219
.219
1.378
1.3170
1.000
.219
1.180
1.6300
1.375
.219
1.531
1.3800
1.125
.188
1.268
1.7550
1.500
.219
1.649
1.4425
1.219
.219
1.388
1.8180
1.563
.219
1.753
1.4425
1.219
.219
1.388
1.6300
1.375
.219
1.537
1.6300
1.375
.219
1.537
1.6300
1.375
.219
1.537
1.6300
1.375
.219
1.537
1.7550
1.500
.219
1.5050
1.250
.219
1.6300
1.375
.219
1.588
1.5050
1.250
.219
1.388
1.8810
1.625
.219
1.780
1.6300
1.375
.219
1.510
1.8810
1.625
.281
1.782
1.6320
1.329
.280
1.460
(1625-4)
EXH
30649
(1625-4)
V6
181ci/2960cc/3.0L
3.430"(87mm) Bore
INT
1993-98 SOHC VG30E Nissan Eng.
Mercury Villager
31719
(1750-66)
EXH
31258
(1500-53)
V6
183ci/2994cc/3.0L
3.40" (88.9mm) Bore
1989-96 DOHC 24 valve Vin H Series (Yamaha)
Eng. Ford Taurus - SHO only
INT
31031
(1437-2)
EXH
31622
(1312-3)
V6
183ci/2999cc/3.0L
3.503" (89mm) Bore
1986-00 OHV Vin U Series Vulcan Eng.
Ford Probe, Taurus (Exc SHO), Tempo,
Aerostar; Mercury Sable, Topaz
INT
30658
(1750-2)
EXH
31031
(1437-2)
V6
195ci/3.2L
3.40" (91mm) Bore
1993-96 DOHC 24 valve Vin P Series Yamaha
Eng. Ford Taurus - SHO only
INT
31031
(1437-2)
EXH
31622
(1312-3)
L6
200ci/3.3L
3.680" Bore
INT
1963-64 OHV Eng.
Ford Fairlane, Falcon, Ranchero;
30648
(1625-1)
EXH
30790
(1375-4)
L4
200ci/3.3L
3.8750" Bore
1965-76 OHV Eng.
Ford Fairlane, Falcon, Granada, Maverick,
Mustang, Ranchero, Torino; Mercury
Caliente, Comet, Monarch, Montego
1977-84 OHV Eng.
Ford Fairmont, Granada, LTD, Maverick,
Mustang, T-Bird; Mercury Capri, Comet,
Cougar, Marquis, Monarch, XR7
1928-32 Model A, B
INT
30658
(1750-2)
EXH
31031
(1437-2)
INT
30667
(1812-4)
EXH
31031
(1437-2)
INT
30648
(1625-1)
EXH
30648
(1625-1)
L4
212ci/3.5L
3.8750" Bore
INT
1932-34 Model AA, C
30648
(1625-1)
EXH
30648
(1625-1)
INT
1952-53 Ford Crestline, Custom (line)
30658
(1750-2)
EXH
30711
V8
221ci/3.6L
3.500" Bore
L6
223ci/3.6L
3.625" Bore
1962-63 OHV Eng.
Ford Fairlane, Falcon;
edsel, Ford Crestline, Custom (line),
1954-66 OHV Eng.
Edsel, Ford Crestline, Custom (line),
Fairlane, Galaxie, Ranchero
INT
30648
(1625-1)
EXH
30711
(1500-1)
INT
30681
(1875-6)
EXH
30648
(1625-1)
V-6
232ci/3.8L
3.811"(96.8mm) Bore
1982-98 Carburetor (82-83) & F.I. Eng. (Aluminum
INT
Head) (84-98) Incl. Supercharged
applications. Ford Fairmont, Granada,
EXH
LTD, Mustang, Taurus, T-Bird, XR-7;
Lincoln Continental, Towncar; Mercury, Capri,
Cougar, Marquis, Monarch, Sable, Zephyr
169
30683
(1875-4)
30860
70860
(1625-54)
(1625-54N)
VALVE SEAT
(1500-1)
L6
215ci/3.5L
3.563" Bore
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V-8
239ci/3.9L
3.188" Bore
INT
1948-53 L Head (Flathead) Eng.
Ford/Mercury Crestline(r), Custom,
Customline, Deluxe, Meteor
30648
1.6300
1.375
.219
1.510
1.6400
1.375
.250
1.510
1.8180
1.500
.219
1.735
1.6300
1.375
.219
1.510
1.8180
1.500/1.625
.219
1.780
1.6920
1.406
.250
1.560
1.7550
1.500
.219
1.649
1.4425
1.219
.219
1.388
1.8180
1.563
.219
1.753
1.4425
1.219
.219
1.388
1.7550
1.500
.219
1.650
1.4425
1.219
.219
1.390
1.7550
1.500
.219
1.682
1.5680
1.312
.219
1.451
1.6920
1.438
.219
1.588
1.5050
1.250
.219
1.388
1.7550
1.500
.219
1.670
1.5680
1.312
.219
1.500
1.8180
1.500/1.625
.219
1.780
1.5680
1.312/1.390
.250
1.510
2.0060
1.750
.219
1.925
1.7550
1.500
.219
1.647
1.8820
1.600/1.673
.252
1.752
1.3820
1.100
.300
1.339
1.5070
1.295
.262
1.456
1.2570
0.976
.180
1.181
1.5070
1.295
.262
1.456
1.2570
0.976
.180
1.181
(1625-1)
EXH
31695
(1640E-1)
V-8
239ci/3.9L
3.500" Bore
1954
INT
OHV V-8 Eng.
Ford/Mercury Crestline(r), Custom,
Customline, Deluxe, Meteor
30668
(1812-2)
EXH
30648
(1625-1)
L6
240ci/3.9L
4.000" Bore
1965-72 OHV Eng.
Ford Custom, Galaxie; Mercury Meteor
INT
30530
(1812-3)
EXH
30670
(1687-1)
L6
250ci/4.1L
3.680" Bore
1969-76 OHV Eng.
Ford Fairlane, Falcon, Granada,
Maverick, Mustang, Ranchero, Torino;
Mercury Comet, Monarch, Montego
1977-80 OHV Eng.
Ford Fairlane, Falcon, Granada,
Maverick, Mustang, Ranchero, Torino;
Mercury Comet, Monarch, Montego
1969-83 LPG, Propane, & Natural Gas
(See applications above)
INT
30658
(1750-2)
EXH
31031
(1437-2)
INT
30667
(1812-4)
EXH
31031
(1437-2)
INT
30658
70658
(1750-2)
(1750-2N)
EXH
71031
(1437-2N)
V8
255ci/4.2L
3.680" Bore
V8
260ci/4.3L
3.680" Bore
1980-82 OHV Eng.
Ford Crown Victoria, Custom, Fairmont,
Granada, LTD, Mustang, T-Bird;
Mercury Capri, Cougar, Marquis, Meteor,
Monarch, XR7, Zephyr
1962-63 OHV Eng.
Ford Fairlane, Falcon, Galaxie, Mustang,
Ranchero; Mercury Comet, Meteor
INT
30658
(1750-2)
EXH
30643
(1562-1)
INT
30664
(1687-2)
EXH
30711
(1500-1)
1964-65 OHV Eng.
Ford Fairlane, Falcon, Galaxie, Mustang,
Ranchero; Mercury Comet, Meteor
INT
30658
(1750-2)
EXH
30643
(1562-1)
V-8
272ci/4.5L
3.625" Bore
1955-62 OHV Eng.
Ford/Mercury Passenger Cars:
Custom(line), Fairlane, Ranchero, T-Bird
INT
30530
(1812-3)
EXH
30503
VALVE SEAT
(1562-2)
V8
281ci/4605cc/4.6L
3.550" (90.2mm) Bore
1957-59 Intake seat for years (1957-59)
w 1.925 vl. hd., .219 depth
1960-62 Intake seat for years (1960-62)
w 1.647 vl. hd., .219 depth
1992-00 SOHC 16 valve Modular Eng. Ford
Crown Victoria, T-Bird; Lincoln Town Car,
Mercury Cougar, Grand Marquis, XR7
INT
30691
(2000-1)
INT
30658
(1750-2)
INT
31092
(1875-56)
EXH
31139
(1375-62)
INT
1993-00 DOHC 32 valve Modular Eng.
Lincoln Continental, Mark VIII
31667
(1500-79)
EXH
31614
(1250-61)
1996-98 Compressed Nat. Gas, see applications
above
INT
71667
(1500-79N)
EXH
71614
(1250-61N)
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
170170
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8
289ci/4.7L
4.000" Bore
V8
292ci/4.8L
3.750" Bore
1963-68 OHV Eng. Ford/Mercury: Caliente,
Comet, Cougar, Custom, Cyclone,
Fairlane, Falcon, Galaxie, LTD, Meteor,
Montego,Mustang, Ranchero, XR7
INT
1963mid 64
Mid 6468
1955-56
INT
Alt. intake seat for years (1963-mid 64)
w 1.670 vl. hd., .219 depth
Alt. intake seat for years (Mid 1964-68)
w 1.750 vl. hd., .219 depth
OHV Eng: Ford Custom, Fairlane,
T-Bird; Mercury Meteor
30530
1.8180
1.500/1.625
.219
1.781
1.5680
1.312
.219
1.450
1.7550
1.500
.219
1.670
1.8810
1.563
.219
1.750
1.8180
1.500/1.625
.219
1.780
1.5680
1.312/1.390
.250
1.510
2.0060
1.750
.219
1.921
1.5680
1.312/1.390
.250
1.510
1.7550
1.438
.219
1.647
1.5680
1.312/1.390
.250
1.510
1.8810
1.625
.250
1.781
1.5680
1.312
.219
1.451
1.8810
1.625
.219
1.782
1.5050
1.215/1.344
.219
1.451
1.5680
1.313
.188
1.451
1.5680
1.312
.219
1.451
1.8810
1.625
.250
1.781
1.5680
1.312
.219
1.451
1.8180
1.500/1.625
.219
1.780
1.5680
1.312/1.390
.250
1.510
2.0060
1.750
.219
1.925
1.5680
1.312/1.390
.250
1.510
1.7550
1.500
.219
1.647
1.5680
1.312/1.390
.250
1.510
(1812-3)
EXH
30643
(1562-1)
30658
(1750-2)
INT
31238
(1875-19)
INT
30530
(1812-3)
EXH
30503
(1562-2)
1957-59 Edsel/Ford: Custom, Fairlane, Galaxie,
Ranchero, Ranger, T-Bird; Mercury
Meteor
INT
30691
(2000-1)
EXH
30503
(1562-2)
1960-62 Edsel/Ford: Custom, Fairlane, Galaxie,
Ranger; Mercury Meteor, Monterey
INT
30655
(1750-3)
EXH
30503
(1562-2)
V8
302ci/5.0L
4.000" Bore
1968-86 OHV Carb. Eng.
Ford/Lincoln/Mercury Passenger Cars:
Capri, Comet, Continental, Cougar,
Crown Victoria, Custom, Cyclone, Elite,
Fairlane, Fairmont, Falcon, Galaxie,
Granada, LTD, Mark VI, Marquis, Maverick,
Meteor, Monarch, Montego, Mustang,
Ranchero, T-Bird, Torino, Town Car,
Versailles, XR7, Zephyr
1983-96 OHV F.I. & High Output Eng.
Capri, Continental, Cougar, Crown
Victoria, LTD, Mark VI, VII, Marquis,
Mustang (except 1993-95 Cobra),
T-Bird, Town Car, XR7, Zephyr
INT
Exh. seat for late model heads (1983-96)
w Thin Wall Sections, incl. Mustang Cobra
Alt.exh. seat for late model heads
(1983-96), all except Mustang Cobra
1968-96 LPG, Propane, Natural Gas Eng.
See applications above
EXH
30682
(1875-1)
EXH
INT
30643
70643
(1562-1)
(1562-1N)
30681
(1875-6)
EXH
EXH
INT
30705
70705
(1500-4)
(1500-4N)
30840
70840
(1562-36)
(1562-36N)
30643
70643
(1562-1)
(1562-1N)
70682
(1875-1N)
70643
(1562-1N)
V8
312ci/5.1L
3.800" Bore
1956
INT
OHV Eng.
Ford Custom, Fairlane, T-Bird,
Mercury Meteor
30530
(1812-3)
EXH
30503
(1562-2)
1957-59 Ford Custom, Fairlane, Parklane, T-Bird;
Mercury Meteor, Montclair, Monterey
INT
30691
(2000-1)
EXH
30503
(1562-2)
1960
Ford Custom, Parklane; Mercury Meteor,
Montclair, Monterey
INT
30658
(1750-2)
EXH
30503
(1562-2)
171
VALVE SEAT
EXH
30682
(1875-1)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8
332ci/5.8L
4.000" Bore
1958-59 OHV Eng.
Edsel/Ford/ Mercury Passenger Cars:
Corsair, Custom, Fairlane, T-Bird
INT
30964
2.0675
1.813/1.875
.250
2.027
1.6920
1.406
.250
1.559
2.2560
1.875
.281
2.190
1.8180
1.563
.219
1.709
2.1300
1.812
.250
2.041
1.7550
1.500
.219
1.655
2.1300
1.875
.250
2.041
1.7550
1.500
.219
1.655
1.9440
1.688
.250
1.842
1.6300
1.375
.219
1.541
1.8810
1.625
.219
1.782
1.5680
1.312
.219
1.460&1.451
2.0675
1.813/1.875
.250
2.027
1.6920
1.406
.250
1.559
2.0675
1.813/1.875
.250
2.027
1.6920
1.406
.250
1.559
2.0675
1.813/1.875
.250
2.027
1.6920
1.406
.250
1.559
2.1300
1.812
.250
2.041
1.6920
1.406
.250
1.559
(2062-1)
EXH
30670
(1687-1)
V8 - Cleveland
351ci/5.8L
4.000" Bore
V8 - Modified
351ci/5.8L
4.000" Bore
V8 - Windsor
351ci/5.8L
4.000" Bore
V8
352ci/5.8L
4.000" Bore
VALVE SEAT
V8
361ci/5.9L
4.050" Bore
V8
390ci/6.4L
4.050" Bore
1970-72 351C - Cleveland Eng. w 4 Brl Carb.
Ford/Mercury Passenger Cars (except
Boss Mustang): Brougham, Comet,
Custom, Cyclone, Fairlane, Falcon,
Galaxie, LTD, Marquis, Meteor, Montego,
Monterey, Mustang, Ranchero, Torino, XR7
1973-74 351C- Cleveland Eng. Gas and LPG,
Propane, Natural Gas applications.
Ford/Mercury Passenger Cars (except
Boss Mustang): Brougham, Cougar,
Custom, Galaxie, LTD, Marquis, Meteor,
Montego, Monterey, Mustang, Ranchero,
Torino, XR7.
1975-79 351M- Modified Eng. Gas and LPG,
Ford/Lincoln/Mercury/ Passenger Cars:
Brougham, Cougar, Custom, Elite,
LTD, Marquis, Meteor, Montego, Monterey,
Ranchero, T-Bird, Torino, XR7
1969-74 351W - Windsor Eng. Gas and LPG,
Comet, Cougar, Custom, Cyclone, Elite,
Fairlane, Falcon, Galaxie, LTD, Montego,
Mustang, Ranchero, Torino, XR7
1975-91 351W - Windsor Eng. Gas and LPG,
Ford/Lincoln/Mercury: Continental,
Cougar, Crown Victoria, Elite, Granada,
LTD, Mark VI, Marquis, Ranchero, T-Bird,
Torino, Town Car, Versailles, XR7
1958-66 OHV Eng.
Edsel/Ford/Mercury: Custom, Fairlane,
Galaxie, LTD, Meteor, Monterey,
Ranchero, T-Bird
1958-59 OHV Eng.
Edsel/Ford: Pacer, Ranger
INT
EXH
INT
30667
70667
(1812-4)
(1812-4N)
30557
(2125-1)
EXH
INT
30658
70658
(1750-2)
(1750-2N)
30537
(2125-2)
EXH
INT
30658
70658
(1750-2)
(1750-2N)
30560
(1937-1)
EXH
INT
30648
70648
(1625-1)
(1625-1N)
30681
(1875-6)
EXH
INT
30643
70643
(1562-1)
(1562-1N)
30964
(2062-1)
EXH
INT
30670
70670
(1687-1)
(1687-1N)
30964
(2062-1)
EXH
1961-71 OHV Gas Eng.
Ford Custom, Fairlane, Galaxie, LTD,
Mustang, Parklane, Ranchero, T-Bird,
Torino; Lincoln/Mercury: Comet, Cougar,
Cyclone, Marauder, Marquis, Meteor,
Montclair, Montego, Monterey, XR7
1963-72 H.P. and Police only
31252
(2250-2)
INT
30670
70670
(1687-1)
(1687-1N)
30964
(2062-1)
EXH
INT
30670
70670
(1687-1)
(1687-1N)
30557
(2125-1)
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
172172
30670
70670
(1687-1)
(1687-1N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8
400ci/6.6L
4.000" Bore
V8
406ci/6.6L
4.130" Bore
1971-79 400 OHV Eng. Gas, LPG, Propane,
Natural Gas applications.
Brougham, Continental, Cougar, Custom,
Elite, Galaxie, LTD, Mark V, Marquis,
Meteor, Montego, Monterey, Ranchero,
T-Bird, Torino, XR7
1962-63 OHV Eng.
Ford Galaxie; Mercury Monterey
V8
410ci/6.7L
4.050" Bore
V8
427ci/7.0L
4.234" Bore
V8
428ci/7.0L
4.130" Bore
V8
429ci/7.0L
4.360" Bore
1966-67 OHV Eng.
Edsel/Ford/Mercury Passenger Cars:
Brougham, Citation, Corsair, Marauder,
Marquis, Montclair, Monterey, Parklane
1963-68 OHV Eng.
Caliente, Comet, Cougar, Custom,
Cyclone, Fairlane, Galaxie, LTD,
Marauder, Montclair, Montego, Monterey,
Mustang, Parklane, Torino, XR7
1966-70 OHV Eng. except Cobra Jet (CJ) & Super
Cobra Jet (SCJ). Ford/Mercury Passenger
Cars: Brougham, Custom, Cyclone,
Fairlane, Galaxie, LTD, Marauder, Meteor,
Montclair, Monterey, Mustang, Parklane,
1968-70 CJ & SCJ Eng. Ford/Mercury Passenger
Cars: Comet, Cougar, Fairlane, Marquis,
Montego, Ranchero, Torino, XR7
1968-73 OHV Eng. except CJ, SCJ, & Police.
Brougham, Comet, Cougar, Custom,
Cyclone, Fairlane, Falcon, Galaxie, LTD,
Marauder, Marquis, Meteor, Monterey,
Mustang, Ranchero, T-Bird, Torino, XR7
1968-73 OHV Hi Perf. Eng. including CJ, SCJ,
& Police.
INT
EXH
INT
1.875
.250
2.041
30658
70658
(1750-2)
(1750-2N)
1.7550
1.500
.219
1.655
30964
2.0675
1.813/1.875
.250
2.027
EXH
EXH
INT
30670
70670
(1687-1)
(1687-1N)
1.6920
1.406
.250
1.559
30658
70658
(1750-2)
(1750-2N)
1.7550
1.500
.219
1.655
30964
2.0675
1.813/1.875
.250
2.027
1.6920
1.406
.250
1.559
2.1300
1.875
.250
2.041
1.7550
1.500
.219
1.655
2.1300
1.875
.250
2.041
1.6300
1.375
.219
1.559
2.2555
1.938
.188
2.090
1.7550
1.500
.219
1.653
2.2555
1.938
.188
2.083
1.7550
1.500
.219
1.654
2.3800
2.000
.188
2.3180
2.000
.281
1.725
2.2555
1.938
.188
2.083
1.7550
1.500
.219
1.654
1.6300
1.375
.219
1.510
1.3480
1.087
.200
1.283
(2062-1)
EXH
INT
30670
70670
(1687-1)
(1687-1N)
30537
(2125-2)
EXH
INT
EXH
INT
EXH
INT
EXH
INT
30658
70658
(1750-2)
(1750-2N)
30537
70537
(2125-2)
(2125-2N)
30648
70648
(1625-1)
(1625-1N)
30989
70989
(2250-1)
(2250-1N)
30658
70658
(1750-2)
(1750-2N)
30989
70989
(2250-1)
(2250-1N)
30658
70658
(1750-2)
(1750-2N)
31791
(2375-1)
EXH
71790
(2312-4N)
30989
70989
(2250-1)
(2250-1N)
30658
70658
(1750-2)
(1750-2N)
FORD TRACTOR
L4
120ci/2.0L
3.188" Bore
1939-52 120 Eng.
2N Series, 2NAN, 8N Series, 8NAN,
8NNN, 9N Series, 9NAN, BN025,
Fordson Tractor
173
INT
30648
(1625-1)
EXH
31633
71633
(1348E-1)
(1348E-1N)
VALVE SEAT
INT
31790
(2312-4)
1968-78 OHV Eng.
Brougham, Continental, Cougar, Custom,
Elite, Galaxie, LTD, Mark III, IV, V,
Marquis, Meteor, Montego, Monterey,
2.1300
(2062-1)
EXH
V8
460ci/7.5L
4.360" Bore
30537
(2125-2)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L4
134ci/2.2L
3.438" Bore
L4
144ci/2.4L
3.563" Bore
L3
158ci/2.6L
4.203" Bore
1953-78 134 Gas, Kerosene & LPG Eng.
NAA, NAB, 500, 500K, 501, 541, 600,
600K, 601, 611, 620, 621, 630, 631, 640,
641, 650, 651, 660, 661, 671, 681, 700,
700K, 701, 740Tri, 741, 771, 2000 Series,
2100, 2110, 2111, 2120, 2130, 2131,
20,000 Series Tractor
1959-64 144 Diesel Eng. Series 500D, 501D
After S/N 153775; Series 600D, 601D,
Series 700D, 701D, Series 2030D,
2031D-2130D, 20,000 Series Tractor
158 Gas, Diesel, & LPG Eng.
Intake seat (OEM #D4NN6056A)
Exhaust seat (OEM #C9NN6057J)
340, Dextra 2000, Ford Force 2000, 3000,
Super Dextra 3000, 231, 233, 2000
Series, 3000 Series, 3600 Dextra & Super
Tractors
Replacement intake seat for above
INT
30668
1.8180
1.500
.219
1.647
1.6360
1.348
.218
1.510
1.6300
1.348
.219
1.2560
1.000
.219
1.9000
1.645
.250
1.805
1.6000
1.282
.299
1.500
1.9000
1.650
.300
1.805
1.6300
1.334
.313
1.500
1.8180
1.500
.219
1.647
1.6360
1.348
.218
1.510
1.8180
1.500
.250
1.647
1.6300
1.375
.219
1.510
1.9000
1.645
.250
1.805
1.6000
1.282
.299
1.500
1.9000
1.650
.300
1.805
1.6300
1.334
.313
1.500
1.9000
1.645
.250
1.805
1.6000
1.282
.299
1.500
1.9000
1.650
.300
1.805
1.6300
1.334
.313
1.500
(1812-2)
EXH 30857+6
70857+6
(1625-11+.006) (1625-11N+.006)
INT
30857
(1625-11)
EXH
INT
31147
71147
(1250-1)
(1250-1N)
31743
(1900E-2)
EXH
INT
31371
71371
(1600E-1)
(1600E-1N)
31744
(1900E-1)
L4
172ci/2.8L
3.900" Bore
Replacement exhaust seat +.030
oversize
1955-64 172 Gas, Kerosene & LPG Eng.
800 Series, 900 Series, 1000 Series,
1800 Series, 3000 Series, 4000 Series,
40,000 Series Tractor
1958-64 172 Diesel Eng. Same applications as
above
EXH
INT
1965-81 175 Diesel Eng.
Dextra 2000, Ford Force 2000, 3000,
Super Dextra 3000, 231, 233, 333, 335,
340, 420, 2000 Series, 3000 Series LoaderTractor.
70642
(1630E-1N)
30668
(1812-2)
EXH 30857+6
70857+6
(1625-11+.006) (1625-11N+.006)
INT
30672
(1812-5)
EXH
L3
175ci/2.8L
4.200" Bore
30642
(1630E-1)
INT
30648
70648
(1625-1)
(1625-1N)
31743
(1900E-2)
EXH
INT
31371
71371
(1600E-1)
(1600E-1N)
31744
VALVE SEAT
(1900E-1)
L3
192ci/3.1L
4.406" Bore
EXH
oversize
1971-81 192 Gas & Diesel Eng.
Ford Force 4000, Major 4000,
4000 Series, 4500 Tractor
INT
30642
70642
(1630E-1)
(1630E-1N)
31743
(1900E-2)
EXH
INT
31371
71371
(1600E-1)
(1600E-1N)
31744
(1900E-1)
EXH
oversize
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
174174
30642
70642
(1630E-1)
(1630E-1N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L3
201ci/3.3L
4.406" Bore
Ford Force 4000, Major 4000, 431, 445,
500, 515, 531, 535, 540, 545, 550, 555,
4000 Series Loader-Tractor
INT
31743
1.9000
1.645
.250
1.805
1.6000
1.282
.299
1.500
1.9000
1.650
.300
1.805
1.6300
1.334
.313
1.500
1.8810
1.563
.219
1.7550
1.375
.219
1.7550
1.500
.219
1.6000
1.282
.299
1.500
1.6300
1.334
.313
1.500
1.9000
1.645
.250
1.805
1.6000
1.282
.299
1.500
1.9000
1.650
.300
1.805
1.6300
1.334
.313
1.500
1.7550
1.438
.219
1.4425
1.126
.219
1.9000
1.645
.250
1.805
1.9000
1.650
.250
1.805
1.6000
1.282
.299
1.500
1.9000
1.650
.300
1.805
1.6300
1.334
.313
1.500
1.8810
1.563
.219
1.7550
1.375
.219
(1900E-2)
EXH
INT
31371
71371
(1600E-1)
(1600E-1N)
31744
(1900E-1)
L4
220ci/3611cc/3.6L
3.938"(100mm) Bore
L6
223ci/3.7L
3.625" Bore
L4
233ci/3.8L
4.203" Bore
oversize
1958-67 220 Diesel A1DDN-B, 592E Eng.
Country Crawler 22, 25, DG4-22, 25
Fordson Major 22-25, Fordson Major
Power, 5000, Super Major 5000, Super 4,
U12, U14, 12, 14, 72, 96 Crawler-Tractors
1958-71 223 Gas Eng.
Commander 6000, 17-1, 6000 Series,
60,000 Series 60104, 60105, 60106,
61104, 61106, 61107 Tractor
oversize
3000 Series, Ford Force 5000, Super
Major 5000, 620, 622, 650, 750, 5000
Series Combine -Tractor
EXH
INT
EXH
INT
30642
70642
(1630E-1)
(1630E-1N)
31238
71238
(1875-19)
(1875-19N)
30652
70652
(1750-7)
(1750-7N)
30658
(1750-2)
EXH
EXH
INT
31371
71371
(1600E-1)
(1600E-1N)
30642
70642
(1630E-1)
(1630E-1N)
31743
(1900E-2)
EXH
INT
31371
71371
(1600E-1)
(1600E-1N)
31744
(1900E-1)
L6
242ci/4.0L
3.625" Bore
L4
256ci/4.2L
4.400" Bore
oversize
1961-71 242 Diesel Eng.
Commander 6000, 6000 Series, 60,000
Series Tractor
1968-81 256 Gas & Diesel Eng. Intake seat,
Non-Turbo (OEM #D4NN6056A)
Intake seat, Turbo (OEM #D4NN6056E)
EXH
INT
30642
70642
(1630E-1)
(1630E-1N)
30655
(1750-3)
EXH
INT
30801
70801
(1437-4)
(1437-4N)
31743
(1900E-2)
INT
31745
(1900E-3)
EXH
71371
(1600E-1N)
31744
(1900E-1)
L6
330ci/5416cc/5.4L
3.938" Bore
EXH
oversize
1964-78 330 "Y" Series Diesel Eng.
INT
EXH
175
30642
70642
(1630E-1)
(1630E-1N)
31238
71238
(1875-19)
(1875-19N)
30652
70652
(1750-7)
(1750-7N)
VALVE SEAT
INT
31371
(1600E-1)
A62, County Super 4, Ford Force 5000,
Major 7000, Super Major 5000, 622, 650,
750, 5000 Series, 6000 Series, 7000 Series
Combine, Loader, Tractor
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L6
401ci/6.6L
4.406" Bore
1969-81 401D, 401DT Diesel & Turbo Diesel.
INT
31743
1.9000
1.645
.250
1.805
1.6000
1.282
.299
1.500
1.9000
1.650
.300
1.805
1.6300
1.334
.313
1.500
1.7570
1.410/1.560
.315
1.657
1.5050
1.100/1.225
.316
1.295
1.7570
1.410/1.560
.315
1.657
1.5050
1.100/1.225
.316
1.295
1.6920
1.438
.219
1.610
1.4425
1.219
.219
1.380
1.8180
1.500
.219
1.735
1.5680
1.312
.219
1.500
1.7550
1.438/1.500
.302
1.575
1.5060
1.255
.318
1.339
1.7570
1.460
.275
1.575
1.5070
1.182
.275
1.339
1.5680
1.312
.219
1.500
1.3800
1.125
.188
1.269
1.6300
1.375
.219
1.527
1.3800
1.125
.188
1.269
1.7550
1.500
.219
1.651
1.4425
1.188
.219
1.390
1.6920
1.438
.219
1.570
1.3800
1.125
.188
1.269
(1900E-2)
Intake seat, non-turbo(OEM #D4NN6056A)
Intake seat, Turbo (OEM #D4NN6056E)
EXH
A64, A66, County Super 6, Major 8000,
9000, TW10, 20, 30, 8000 Series,
9000 Series, Loader Tractor+E1261
INT
31371
71371
(1600E-1)
(1600E-1N)
31744
(1900E-1)
Replacement exhaust seat +.030 oversize
EXH
30642
70642
(1630E-1)
(1630E-1N)
FORD TRUCK
L4
110ci/1797cc/1.8L
3.071" (78mm) Bore
INT
Ford Courier Truck
30165
(1750-63)
EXH
30045
(1500-57)
L4
121ci/1970cc/2.0L
3.150" (80mm) Bore
1979-82 SOHC Type A, C, MA, MB Mazda Eng.
Ford Courier Truck
INT
30165
(1750-63)
EXH
30045
(1500-57)
L4
122ci/2.0L
3.525" (89.5mm) Bore
INT
1983-88 Ford Eng.
Aerostar, Ranger
30664
(1687-2)
EXH
31031
(1437-2)
L4
140ci/2298cc/2.3L
3.780" Bore
1977-99 SOHC Eng. (Incl. Carb. & F.I. models)
Ford Aerostar, Courier, Ranger
INT
30668
(1812-2)
EXH
30643
(1562-1)
L4
141ci/2346cc/2.3L
91.1mm Bore
1980-88 SOHC Diesel & Turbo Diesel Mitsubishi Eng.
Bronco II, Ranger (Replacement intake seat)
INT
EXH
(Replacement exhaust seat)
INT
(OEM sized intake seat for above)
31117
71117
(1750-60)
(1750-60N)
31235
71235
(1500-69)
(1500-69N)
31719
(1750-66)
EXH
(OEM sized exhaust seat for above)
L6
144ci/2.4L
3.500" Bore
INT
1960-64 OHV Eng.
Ford Truck/Van E100, P100
31668
71668
(1500-72)
(1500-72N)
30643
(1562-1)
EXH
30790
VALVE SEAT
(1375-4)
L6
170ci/2.8L
3.500" Bore
1962-64 OHV Eng.
Ford Truck/Van: Bronco; E-100, 200,
300; P100, 350; 400, 500 Series
INT
30648
(1625-1)
EXH
30790
(1375-4)
1965-72 OHV Eng. Ford Truck/Van:
Bronco; E-100, 200, 300; P100, 350,
400, 500 Series
INT
30658
(1750-2)
EXH
31030
(1437-3)
V6
171ci/2.8L
3.661" (93mm) Bore
INT
1983-86 OHV Eng. Ford Truck/Vans:
Aerostar, Bronco II, Ranger
30664
(1687-2)
EXH
30790
(1375-4)
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
176176
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
FORD TRUCK (CONT'D)
V6
177ci/2934cc/2.9L
3.661" (93mm) Bore
INT
1986-92 German Ford Eng.
Bronco II, Ranger
30658
1.7550
1.500
.219
1.657
1.5050
1.250
.219
1.419
1.5050
1.250
.188
1.419
1.7550
1.500
.219
1.661
1.4425
1.188
.219
1.371
1.7550
1.500
.219
1.651
1.4425
1.219
.219
1.390
1.8810
1.625
.219
1.780
1.6300
1.375
.219
1.510
1.8810
1.625
.281
1.782
1.6320
1.329
.280
1.460
1.8810
1.625
.281
1.782
1.5690
1.329
.280
1.460
1.6300
1.375
.219
1.647
1.6400
1.375
.250
1.510
1.8180
1.500/1.625
.219
1.780
1.6920
1.406
.250
1.560
1.8180
1.563
.219
1.713
1.4425
1.219
.219
1.358
1.7550
1.500
.219
1.649/1.682
1.5680
1.312
.219
1.451
1.8180
1.500/1.625
.219
1.779
1.6300
1.334
.313
1.515
1.8180
1.500/1.625
.219
1.779
1.6300
1.334
.313
1.515
1.8180
1.500/1.625
.219
1.780
1.5680
1.312
.219
1.460
(1750-2)
EXH
30711
(1500-1)
V6
183ci/2999cc/3.0L
3.503" (89mm) Bore
Alt. Exh. For Thin Wall Heads w 3/16"
(.188) depth
1986-99 OHV Series U Vulcan Eng.
Aerostar, Ranger, Villager, Windstar
EXH
30710
(1500-13)
INT
30658
(1750-2)
EXH
31030
(1437-3)
L6
200ci/3.3L
3.680" Bore
INT
1965-74 OHV Eng. Ford Truck/Vans,
Ford Bronco (73-74)
30658
(1750-2)
EXH
31031
(1437-2)
L6
223ci/3.6L
3.625" Bore
V6
232ci/3.8L
3.811" (96.8mm) Bore
1954-64 OHV Eng.
Ford Truck: F-100, 250, 350, Series
400, 500, 550, 600; P-100, 350
INT
EXH
INT
1982-84 OHV Carb. Series 3, C & R Eng.
Ford Truck F-100
EXH
INT
V6
244ci/4.0L
3.95" (100mm) Bore
L6
262ci/4.3L
3.719" Bore
V8
272ci/4.5L
3.625" Bore
1948-55 L Head Eng.
Ford Truck: F100, 250, 350. 3, 4, 6,
11, 19, 21, 29, 49, 59, 69, 79, 81, 91, 99,
111, 114, 118, 191, 194, 198, 211, 214,
218, 291, 294, 298, 500, 600, 700, 800,
817, 911, 917, 991, 997, 998 Series
E100, 200, F-100, 250, 350; P-100, 350;
400, 500, 550, 600, 700, 750 Series
1990-00 OHV VGE4 (Vin X) German Eng.
Aerostar, Bronco II, Explorer, Ranger
INT
70860
(1625-54N)
30683
EXH
INT
70860
(1625-54N)
30648
31695
71695
(1640E-1)
(1640E-1N)
30530
(1812-3)
EXH
INT
INT
Bronco, E-100, 250, 350; F-100,
150, 250, 350
30860
(1625-54)
(1625-1)
EXH
30670
70670
(1687-1)
(1687-1N)
30667
70667
(1812-4)
(1812-4N)
31031
71031
(1437-2)
(1437-2N)
30658
(1750-2)
EXH
INT
1954-55 OHV Eng.
Ford Trucks: F-100, 250, 350;
500, 600, 700 Series
30643
70643
(1562-1)
(1562-1N)
30530
(1812-3)
EXH
INT
F-100, 250, 350; 500, 550, 600,
700 Series
1956
30860
(1625-54)
30642
70642
(1630E-1)
(1630E-1N)
30530
(1812-3)
EXH
OHV Eng. Ford Truck/Van:
F-100, 250, 350, P350; 400, 500, 600,
700 Series
177
INT
30642
70642
(1630E-1)
(1630E-1N)
30530
(1812-3)
EXH
30643
70643
(1562-1)
(1562-1N)
VALVE SEAT
V8
256ci/4.2L
3.625" Bore
30683
V8
255ci/4.2L
3.680" Bore
70648
(1625-1N)
(1875-4)
EXH
L6
240ci/3.9L
4.000" Bore
30648
(1625-1)
(1875-4)
1995-00 OHV F.I. Series 4, C & R Eng.
Ford Winstar, Mercury Villager
V8
239ci/3.9L
3.188" Bore
30681
(1875-6)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
FORD TRUCK (CONT'D)
V8
272ci/4.5L
3.625" Bore
F-100, 250, 350, P350; 400, 500, 600,
700 Series
V8
281ci/4605cc/4.6L
3.551" (90.2mm) Bore
V8
289ci/4.7L
4.000" Bore
V8
292ci/4.8L
3.750" Bore
L6
300ci/4.9L
4.000" Bore
1997-99 SOHC 16 valve Series 6 Modular Eng.
Light Duty Ford Truck/Van
INT
EXH
EXH
INT
2.0060
1.750
.219
1.925
30643
70643
(1562-1)
(1562-1N)
1.5680
1.312
.219
1.460
30503
70503
(1562-2)
(1562-2N)
1.5680
1.312/1.390
.250
1.510
31092
1.8820
1.600/1.673
.252
1.752
1.3820
1.100
.300
1.339
1.8180
1.500/1.625
.219
1.781
1.5680
1.312
.219
1.451
2.0060
1.750
.219
1.925
1.5680
1.312/1.390
.250
1.510
1.7550
1.438
.219
1.647
1.5680
1.312/1.390
.250
1.510
1.8180
1.500/1.625
.219
1.780
1.6920
1.406
.250
1.560
1.8180
1.500/1.625
.219
1.781
1.6920
1.406
.250
1.560
1.6920
1.375
.219
1.560
1.8180
1.500/1.625
.219
1.781
1.6920
1.406
.250
1.560
2.1300
1.812
.250
1.925
1.6300
1.334
.313
1.510
1.8810
1.625
.250
1.782
1.5680
1.312
.219
1.451
1.8810
1.625
.250
1.782
1.5680
1.312
.219
1.451
1.8820
1.600/1.673
.252
1.752
1.3820
1.100
.300
1.339
1.3820
1.100
.300
1.339
(1875-56)
EXH
INT
1965-68 OHV Eng.
Ford Bronco
30691
(2000-1)
31139
71139
(1375-62)
(1375-62N)
30530
(1812-3)
EXH
F-100, 250, 350; P-350, 450, 500, 550,
600, 700, 800 Series
600, 700, 800 Series
F-100, 250, 350; P-350, 450, 500, 550,
600, 700, 800 Series
1965-79 OHV Eng. Heavy Duty Ford Truck/Van :
400, 450, 500, 550, 600, 700, 750 Series
INT
30643
70643
(1562-1)
(1562-1N)
30691
(2000-1)
EXH
INT
30503
70503
(1562-2)
(1562-2N)
30655
(1750-3)
EXH
INT
30503
70503
(1562-2)
(1562-2N)
30530
70530
(1812-3)
(1812-3N)
EXH
70670
(1687-1N)
1965-97 OHV Carb. & F.I. Eng.
Light Duty Ford Truck/Van & Bronco.
E-100, 150, 200, 250, 300, 350; F100,
150, 250, 350; P100, 350
1994-97 OHV Eng. LPG, Propane,
Natural Gas
Ford/Truck/Van LD-HD Applications.
INT
30530
(1812-3)
EXH
EXH
INT
30670
70670
(1687-1)
(1687-1N)
30677
70677
(1687-5)
(1687-5N)
30530
70530
(1812-3)
(1812-3N)
EXH
70670
(1687-1N)
VALVE SEAT
V8
302ci/5.0L
3.625" Bore
V8
302ci/5.0L
4.000" Bore
1956-63 OHV Eng. Heavy Duty Ford Truck:
700, 750, 800, 850, 900 Series
INT
EXH
1969-00 OHV- Carb. & F.I. Eng. Ford Truck/Van:
Bronco, Explorer, Mountaineer, E-100,
150, 200, 250, 300, 350, F-100, 150,
250, 350
1969-97 OHV Eng. LPG, Propane,
Natural Gas
Ford/Truck/Van LD-HD Applications.
INT
30557
70557
(2125-1)
(2125-1N)
30642
70642
(1630E-1)
(1630E-1N)
30682
(1875-1)
EXH
INT
30643
70643
(1562-1)
(1562-1N)
30682
70682
(1875-1)
(1875-1N)
EXH
70643
(1562-1N)
V8
330ci/5.4L
3.551" (90.2mm) Bore
1997-00 SOHC 16 valve Vin L, M, Z Series
Modular Triton Gas Eng. Light-Medium
Duty Ford Truck/Van
INT
EXH
EXH
Exh. Seat for Modular Triton LPG,
Natural Gas applications above
31092
71092
(1875-56)
(1875-56N)
31139
71139
(1375-62)
(1375-62N)
71139
(1375-62N)
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
178178
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
FORD TRUCK (CONT'D)
V8
330ci/5.4L
3.875" Bore
1964-78 OHV Eng. Ford Medium Duty Truck/Van
500, 550, 600, 650 Series Ford H.D.
Truck/Van 700, 750, 800, 900 Series
INT
31725
1.8150
1.595
.250
1.753
1.6300
1.334
.313
1.505
1.8800
1.562
.250
1.753
1.6925
1.344
.313
1.508
1.8150
1.595
.250
1.753
1.6300
1.334
.313
1.505
2.1300
1.812
.250
1.925
1.6300
1.334
.313
1.510
2.1300
1.875
.250
2.041
1.7550
1.500
.219
1.655
1.8810
1.625
.219
1.782
1.5680
1.312
.219
1.460&1.451
1.8810
1.625
.219
1.782
1.5680
1.312
.219
1.460&1.451
1.9430
1.688
.188
1.842
1.6310
1.375
.188
1.541
2.0680
1.813/1.875
.250
2.027
1.6920
1.406
.250
1.559
1.8150
1.595
.250
1.753
1.6300
1.334
.313
1.505
1.8800
1.562
.250
1.753
1.6925
1.344
.313
1.508
1.8150
1.595
.250
1.753
1.6300
1.334
.313
1.505
2.0680
1.813/1.875
.250
2.027
1.6920
1.406
.250
1.559
2.0680
1.813/1.875
.250
2.027
1.6920
1.406
.250
1.559
(1815E-1)
EXH
(OEM Int. Seat #C8TZ-6057A)
30642
70642
(1630E-1)
(1630E-1N)
(OEM Exh. Seat #C4TZ-6057A & D1TZ-6057A)
INT
30509
(1875-2)
for above
LPG, Propane, Natural Gas applications
for Medium- HD Ford Truck/Van
above
EXH
INT
30559
70559
(1687-4)
(1687-4N)
31725
71725
(1815E-1)
(1815E-1N)
EXH
70642
(1630E-1N)
V8
332ci/5.4L
3.800" Bore
V8 - Modified
351ci/5.8L
4.000" Bore
V8 - Windsor
351ci/5.8L
4.000" Bore
1956-63 OHV Eng. Medium Duty/Heavy Duty
Ford Truck 700, 750, 800, 850, 900
Series
1977-82 351M - Modified Eng.
Ford Truck/Van: Bronco, E-100, 150,
250, 300, 350; F-100, 150, 250, 350
1975-99 351W - Windsor Eng. Carb.& F.I. Vin H
Ford Truck/Van: Bronco, E-100, 150,
250, 300, 350, F-100, 150, 250, 350
1975-97 351W - Windsor Eng. w LPG,
Propane, Natural Gas, see applications
above
INT
EXH
INT
30557
70557
(2125-1)
(2125-1N)
30642
70642
(1630E-1)
(1630E-1N)
30537
(2125-2)
EXH
INT
30658
70658
(1750-2)
(1750-2N)
30681
(1875-6)
EXH
INT
30643
70643
(1562-1)
(1562-1N)
30681
70681
(1875-6)
(1875-6N)
EXH
70643
(1562-1N)
V8
352ci/5.8L
4.000" Bore
V8
359ci/5.9L
4.050" Bore
1993-96 351 Special Hi-Perf Vin R (Lightning)
applications: Ford Truck/Van: Bronco,
E-100, 150, 250, 300, 350; F-100, 150,
250, 350
1965-67 OHV Eng. Light Duty, Medium Duty
Ford Truck F-100, 250, 350, P-350;
Series 500
1973-78 OHV Ford Eng. Ford MD & HD Truck:
600, 650, 700, 750, 800 Series
INT
EXH
INT
EXH
INT
INT
71046
(1625-33N)
30964
EXH
INT
30670
70670
(1687-1)
(1687-1N)
31725
71725
(1815E-1)
(1815E-1N)
30642
70642
(1630E-1)
(1630E-1N)
30509
70509
(1875-2)
(1875-2N)
30559
70559
(1687-4)
(1687-4N)
31725
71725
(1815E-1)
(1815E-1N)
EXH
70642
(1630E-1N)
V8
360ci/5.9L
4.050" Bore
Ford Truck/Van F-100, 150, 250, 350;
450, 500 Series
LPG, Propane, Natural Gas for above
applications
INT
30964
(2062-1)
EXH
INT
EXH
30670
70670
(1687-1)
(1687-1N)
30964
70964
(2062-1)
(2062-1N)
70670
(1687-1N)
179
VALVE SEAT
applications
31046
(1625-33)
70935
(1937-23N)
(2062-1)
EXH
(OEM Int. Seat #C8TZ-6057A)
30935
(1937-23)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
FORD TRUCK (CONT'D)
V8
361ci/5.9L
4.050" Bore
1964-78 OHV Eng. Medium Duty, Heavy Duty
Ford Truck/Van 500, 550, 600, 650, 700,
750, 800 Series (OE Int. Seat #C8TZ-6057A)
INT
EXH
INT
applications
EXH
INT
31725
71725
(1815E-1)
(1815E-1N)
30642
70642
(1630E-1)
(1630E-1N)
30509
70509
(1875-2)
(1875-2N)
30559
70559
(1687-4)
(1687-4N)
31725
71725
(1815E-1)
(1815E-1N)
EXH
70642
1.8150
1.595
.250
1.753
1.6300
1.334
.313
1.505
1.8800
1.562
.250
1.753
1.6925
1.344
.313
1.508
1.8150
1.595
.250
1.753
1.6300
1.334
.313
1.505
1.8810
1.625
.250
1.784
1.6710
1.367
.311
1.562
1.6925
1.344
.313
1.562
1.8810
1.625
.250
1.784
1.6710
1.367
.311
1.562
1.8150
1.595
.250
1.753
1.6300
1.334
.313
1.505
1.8800
1.562
.250
1.753
1.6925
1.344
.313
1.508
2.0680
1.813/1.875
.250
2.027
1.6920
1.406
.250
1.559
1.8150
1.595
.250
1.753
1.6300
1.334
.313
1.505
1.8800
1.562
.250
1.753
1.6925
1.344
.313
1.508
1.8150
1.595
.250
1.753
1.6300
1.334
.313
1.505
2.1300
1.875
.250
2.041
1.7550
1.500
.219
1.655
2.2200
1.843
.312
2.020
1.7421
1.457
.315
1.635
1.9620
1.595
.365
1.870
1.7330
1.455
.365
1.693
(1630E-1N)
V8
370ci/6.1L
4.050" Bore
1979-92 OHV Eng. Md. Duty, Hvy. Duty Ford
Truck/Van 600, 700, 750, 800, 880,
900 Series (OEM Exh. Seat #D9HZ-6057C)
INT
EXH
EXH
Alt. Oversize Exh. w 1.505 vl. hd.
applications
INT
30682
70682
(1875-1)
(1875-1N)
31698
71698
(1671E-1)
(1671E-1N)
30559
70559
(1687-4)
(1687-4N)
30682
70682
(1875-1)
(1875-1N)
EXH
71698
(1671E-1N)
V8
389ci/6.4L
4.050" Bore
Truck/Van 500, 600, 650, 700, 750, 800
(OE Int. Seat #C8TZ-6057A)
Series
INT
EXH
INT
V8
390ci/6.4L
4.050" Bore
V8
391ci/6.4L
4.050" Bore
Ford Truck F-100, 150, 250, 350;
450, 500 Series
Truck/Van 500, 600, 650, 700, 750, 800
(OE Int. Seat #C8TZ-6057A)
Series
EXH
INT
EXH
INT
EXH
INT
VALVE SEAT
applications
EXH
INT
31725
71725
(1815E-1)
(1815E-1N)
30642
70642
(1630E-1)
(1630E-1N)
30509
70509
(1875-2)
(1875-2N)
30559
70559
(1687-4)
(1687-4N)
30964
70964
(2062-1)
(2062-1N)
30670
70670
(1687-1)
(1687-1N)
31725
71725
(1815E-1)
(1815E-1N)
30642
70642
(1630E-1)
(1630E-1N)
30509
70509
(1875-2)
(1875-2N)
30559
70559
(1687-4)
(1687-4N)
31725
71725
(1815E-1)
(1815E-1N)
EXH
70642
(1630E-1N)
V8
400ci/6.6L
4.000" Bore
V8
401ci/6.6L
4.125" Bore
1977-82 OHV Eng. Light Duty Ford Truck/Van
Bronco, E-100, 150, 250, 300, 350,
F-100, 150, 250, 350 (includes LPG,
Propane, Natural Gas)
1958-76 OHV Eng. Heavy Duty Ford Truck
750, 800, 850, 880, 900, 1000,
1100 Series
INT
EXH
INT
EXH
30537
70537
(2125-2)
(2125-2N)
30658
70658
(1750-2)
(1750-2N)
31786
71786
(2220E-1)
(2220E-1N)
71086
(1744E-1N)
L6
401ci/6.6L
4.400" Bore
INT
1986-95 Diesel & Turbo Diesel (Brazil)
Ford Heavy Duty Truck
CF600, 800, 8000 Series
71752
(1962E-1N)
EXH
71710
(1733E-2N)
180180
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
FORD TRUCK (CONT'D)
V10
415ci/6.8L
3.551" (90.2mm) Bore
V8
420ci/6.9L
4.000" Bore
INT
1997-00 SOHC Vin S Series Modular V-10
Triton Gas Eng. Medium-Heavy
Duty Ford Truck/Van
EXH
Exh. Seat for Modular Triton LPG,
Natural Gas applications above
1983-84 IHC Truck Navistar Diesel Eng.
Light Duty Ford Truck F-150, 250, 350
Early year A & B Thin Wall Casting
1985-87 IHC Truck Navistar Diesel Eng.
Light Duty Ford Truck F-150, 250, 350
1979-91 OHV Eng. - Carb. Med. Duty, H. D. Ford
Truck 600, 700, 750, 800, 880, 900
(OEM Exh. Seat D9HZ-6057A)
Series
71092
(1875-56N)
31139
71139
(1375-62)
(1375-62N)
EXH
71139
1.8820
1.600/1.673
.252
1.752
1.3820
1.100
.300
1.339
1.3820
1.100
.300
1.339
1.8800
1.625
.188
1.877
1.6690
1.372/1.429
.272
1.595 37º
1.9420
1.688
.188
1.877
1.6690
1.372/1.429
.272
1.595 37º
2.2555
1.938
.188
2.064
1.7810
1.476
.311
1.672
1.8180
1.468
.313
1.672
2.0680
1.813
.188
1.978
1.7810
1.476
.311
1.654
1.8180
1.468
.313
1.654
1.8800
1.625
.188
1.877
1.9430
1.688
.188
1.877
1.6690
1.372/1.429
.272
1.595 37º
1.7550
1.438
.250
1.680 30º
1.7550
1.438
.250
1.680 37º
2.2555
1.938
.188
2.064
1.7550
1.500
.219
1.656
2.0680
1.813
.188
1.978
1.7810
1.476
.311
1.654
2.2555
1.938
.188
2.083
1.8180
1.468
.313
1.654
1.9620
1.595
.365
1.870
1.7330
1.455
.365
1.693
2.2200
1.843
.312
2.020
1.7421
1.457
.315
1.635
(1375-62N)
INT
EXH
INT
EXH
V8
429ci/7.0L
4.360" Bore
31092
(1875-56)
INT
31737
71737
(1875-38)
(1875-38N)
30868
70868
(1669E-1)
(1669E-1N)
30935
70935
(1937-23)
(1937-23N)
30868
70868
(1669E-1)
(1669E-1N)
30989
70989
(2250-1)
(2250-1N)
EXH
71257
(1781E-1N)
1991-98
V8
445ci/7.3L
4.110" Bore
1988-89
1989-97
1994-99
V8
460ci/7.5L
4.360" Bore
1973-87
Alt. Oversize Exh. seat w 1.672 vl. hd.,
.313 depth
OHV Eng. - F.I. also includes LPG,
Propane, Nat Gas. Med. Duty, H. D.
Ford Truck 600, 700, 750, 800, 880, 900
Series
(OEM Exh. Seat D9HZ-6057A)
Alt. Oversize Exh. seat w 1.672 vl. hd.,
.313 depth
Navistar Diesel Eng. Ford Truck/Van:
E-250, 350; F-150,250, 350 Early year
A & B Thin Wall Casting Only
Navistar Diesel, Turbo-Diesel w Indirect
Injection Eng. Ford Truck/Van: E-250,
350; F-150, 250, 350, non-thin wall
castings only (OEM Exh. Seat #E3TZ-6057B)
Navistar Diesel, Turbo-Diesel w Direct
Injection Eng. Ford Truck/Van: E-250,
350; F-150, 250, 350, non-thin wall
castings only. (Must cut seat angles as listed)
OHV Eng. - Carb. Ford Truck/Van:
E-250, 300, 350; F-100, 150, 250, 350;
450, 500 Series
70680
(1812-21N)
INT
31770
71770
(2062-30)
(2062-30N)
EXH
71257
(1781E-1N)
EXH
70680
(1812-21N)
INT
EXH
INT
EXH
INT
EXH
INT
EXH
INT
31737
71737
(1875-38)
(1875-38N)
N.A.
N.A.
30935
70935
(1937-23)
(1937-23N)
30868
70868
(1669E-1)
(1669E-1N)
30656
70656
(1750-4)
(1750-4N)
30656
70656
(1750-4)
(1750-4N)
30989
70989
(2250-1)
(2250-1N)
30658
70658
(1750-2)
(1750-2N)
31770
71770
(2062-30)
(2062-30N)
71257
(1781E-1N)
Alt. Oversize Int. seat w 2.083 vl. hd.,
.188 depth
Alt. Exh. seat w 1.654 vl. hd., .313 depth
INT
30989
70989
(2250-1)
(2250-1N)
EXH
70680
(1812-21N)
L6
474ci/7.8L
4.400" Bore
1987-94 Turbo Diesel (Brazil ) Eng.
Medium Duty, Heavy Duty Ford Truck
CF600, 800 Series
INT
71752
(1962E-1N)
EXH
71710
(1733E-2N)
V8
475ci/7.8L
4.500" Bore
1973-81 OHV Eng. Ford Truck Medium Duty,
Heavy Duty 750, 800, 850, 880, 900,
950, 1000, 1100 Series
INT
EXH
31786
71786
(2220E-1)
(2220E-1N)
71086
(1744E-1N)
(OEM Int. Seat #B8TZ-6057T)
(OEM Exh. Seat #B8QH-6057A)
181
VALVE SEAT
EXH
1988-99 OHV F.I. Gas Eng. incl. LPG, Propane,
Natural Gas. Ford Truck/Van: E-250,
350; F-250, 350
EXH
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
FORD TRUCK (CONT'D)
V8
477ci/7.8L
4.500" Bore
1958-81 OHV Eng. Ford Truck Medium Duty,
Heavy Duty 750, 800, 850, 880, 900,
950, 1000, 1100 Series
INT
31786
71786
(2220E-1)
(2220E-1N)
EXH
71086
2.2200
1.843
.312
2.020
1.7421
1.457
.315
1.635
2.2200
1.843
.312
2.020
1.7421
1.457
.315
1.635
1.5680
1.250
.313
1.417
1.3800
1.063
.313
1.181
1.5695
1.170
.267
1.417
1.3820
1.000
.280
1.181
1.5070
1.175/1.235
.236
1.378
1.1940
0.934
.260
1.102
1.5695
1.170
.267
1.417
1.3820
1.000
.280
1.181
1.6300
1.375
.219
1.535
1.3800
1.125
.219
1.260
1.5690
1.180
.305
1.415
1.3195
1.060
.275
1.220
(1744E-1N)
V8
534ci/8.8L
4.500" Bore
1958-81 OHV Eng. Heavy Duty Ford Truck
750, 800, 850, 880, 900, 950, 1000,
1100 Series
INT
31786
71786
(2220E-1)
(2220E-1N)
EXH
71086
(1744E-1N)
GENERAL MOTORS PASSENGER CAR (INCLUDES: BUICK,
CADILLAC, CHEVROLET, GEO, OLDSMOBILE, PONTIAC, & SATURN)
L3
61ci/993cc/1.0L
2.913" (74mm) Bore
INT
1985-88 SOHC Suzuki Eng.
Chevrolet Sprint, Pontiac Firefly
30647
(1562-17)
EXH
30787
(1375-18)
1985-88 SOHC Suzuki G10 Eng. Vin M & 5.
Chevrolet Sprint, Pontiac Firefly
INT
31673
(1562-77)
EXH
31064
(1375-64)
1989-00 SOHC Suzuki G10 & G10T Turbo Eng.
Vin 2 & 6. Chevrolet Sprint,
Geo Metro, Pontiac Firefly
L4
80.8ci/1325cc/1.3L
2.913" (74mm) Bore
1992-98 SOHC Suzuki G13K Eng, Vin 9 (95-97) .
1.3 - 9 Models
INT
31205
(1500-77)
EXH
INT
31050
71050
(1187-52)
(1187-52N)
31673
(1562-77)
EXH
31064
(1375-64)
L4
85ci/1.4L
3.228" (82mm) Bore
INT
1976-77 SOHC Chevrolet Eng.
Chevrolet Chevette
30648
(1625-1)
EXH
30558
(1375-1)
L4
92ci/1471cc/1.5L
3.033" (77mm) Bore
1985-90 SOHC Isuzu 4XC1 - Vin K, 7 Eng.
SOHC Isuzu 4XC1T - Vin 9 Turbo Eng.
Chevrolet Spectrum, Pontiac Sunburst
INT
31079
(1562-70)
EXH
31628
(1312-61)
L4
96.8ci/1587cc/1.6L
3.11" (79mm) Bore
INT
1988-93 SOHC Daewoo (Korean) Vin 6,
1.6-6 (L73) Eng. Pontiac Le Mans
31199
1.5685
1.255/1.372
.319
1.496
(1562-67)
EXH
30562
1.3190
1.085
.305
1.222
1.5070
1.220/1.339
.315
1.417
1.3195
1.044
.273
1.220
1.2570
1.01
.257
1.201
1.1320
0.854
.237
1.004
1.3170
1.046
.227
1.220
1.1933
0.929
.256
1.102
1.2570
1.01
.257
1.201
1.0690
0.790
.260
.967
VALVE SEAT
(1312-56)
L4
96.8ci/1587cc/1.6L
3.189" (81mm) Bore
INT
1985-88 SOHC Toyota 4ALC Vin 4 Eng.
Chevrolet Nova
30717
(1500-71)
EXH
31624
(1312-59)
1988-92 DOHC 16 valve 4AGE & 4AGELC Vin 5
Toyota Twin Cam Eng.
Chevrolet Nova, Geo Prizm
INT
31619
(1250-54)
EXH
31604
(1125-51)
1990-91 DOHC Isuzu 16 valve GSI Vin 5 Eng.
INT
30734
(1312-65)
EXH
31435
(1187-52)
1989-97 DOHC 16 valve 4A-6, 4AF, 4AFE
Vin 6 Toyota Eng. Geo Prizm, Pontiac
Le Mans
INT
31619
(1250-54)
EXH
31047
(1062-50)
182182
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L4
97ci/1588cc/1.6L
3.150" (80mm) Bore
1990-93 SOHC 12 valve 4XE1 Isuzu Eng. - E.F.I.
except GSI & DOHC Vin 6 Eng
except GSI. Geo Storm
INT
31435
1.1933
0.929
.256
1.102
1.3820
1.000
.280
1.260
1.1933
0.929
.256
1.102
1.3170
1.046
.227
1.220
1.5070
1.295
.262
1.441
1.3820
1.102/1.160
.260
1.278
1.0690
0.790
.260
1.2570
1.01
.257
1.6300
1.375
.219
1.535
1.3800
1.125
.219
1.260
1.2570
1.01
.257
1.221
1.0690
0.790
.260
.965
1.3170
1.046
.227
1.220
1.1933
0.929
.256
1.102
1.7550
1.500
.250
1.691
1.3807
1.121
.254
1.295
1.7570
1.410/1.560
.315
1.673
1.4440
1.100/1.226
.315
1.339
1.6320
1.305
.227
1.535
1.4445
1.100
.227
1.335
1.6940
1.450
.297
1.614
1.4440
1.200
.297
1.378
1.7570
1.410/1.560
.315
1.615
1.5060
1.200/1.240
.315
1.376
1.6920
1.438
.219
1.600
1.4425
1.219
.219
1.378
1.6945
1.397
.257
1.575
1.4445
1.140
.237
1.339
(1187-52)
EXH
31064
(1375-64)
1990-91 DOHC 16 valve 4XE1W Vin 5 Isuzu Eng.
w GSI. Geo Storm
INT
31435
(1187-52)
EXH
30734
(1312-65)
L4
97ci/1590cc/1.6L
2.953" (75mm) Bore
1989-97 SOHC 8 valve G16K, G16KC, G16U
Vin U Suzuki Eng. Geo Tracker, Pontiac
Le Mans
INT
31667
(1500-79)
EXH
30238
(1375-56)
1994-98 SOHC 16 valve G16KV Suzuki Eng.
Geo Tracker, Pontiac LeMans
INT
31047
(1062-50)
EXH
31619
(1250-54)
L4
98ci/1599cc/1.6L
3.228" (82mm) Bore
1976-87 SOHC Vin C Chevrolet Eng.
Chevrolet Chevette; Pontiac Acadian,
T1000
INT
30648
(1625-1)
EXH
30558
(1375-1)
L4
109ci/1762cc/1.8L
3.189" (81mm) Bore
INT
1993-97 DOHC 16 valve 7AFE - Vin 8
Toyota Eng. Geo Prizm
31619
(1250-54)
EXH
31047
(1062-50)
L4
110ci/1809cc/1.8L
3.15" (80mm) Bore
INT
1992-93 DOHC 16 valve 4XF1 Vin 8 Isuzu
Eng. Geo Storm
30734
(1312-65)
EXH
31435
(1187-52)
L4
111ci/1817cc/1.8L
3.307" (84mm) Bore
1972-75 SOHC G180Z Isuzu Gas Eng.
Chevrolet Passenger Cars & LUV Truck
INT
30659
(1750-1)
EXH
31103
(1375-50)
1976-79 SOHC G180Z Isuzu Gas Eng.
Chevrolet Passenger Cars & LUV Truck
INT
EXH
1981-86 SOHC 4FB1 Vin D Isuzu Diesel Eng.
Chevrolet Chevette; Pontiac Acadian,
T-1000
30165
(1750-63)
INT
31329
71329
(1437-56)
(1437-56N)
31689
(1625-61)
EXH
31654
(1437-64)
INT
30881
(1687-54)
EXH
INT
30818
70818
(1437-62)
(1437-62N)
30165
(1750-63)
EXH
31241
(1500-58)
L4
112ci/1835cc/1.8L
3.504" (89mm) Bore
L4
116ci/1.9L
3.228" (82mm) Bore
OHV Vin G (Cast Iron Head)
Chevrolet Eng. Buick Skyhawk; Cadillac
Cimarron; Chevrolet Cavalier; Oldsmobile
Firenza; Pontiac J-2000, Sunbird
1991-99 SOHC LKO Vin 9 Saturn Eng.
Saturn SC1, SC2, SL, SL1, SL2, SLC,
SW1, SW2 Series Passenger Cars
1982
INT
30664
(1687-2)
EXH
31031
(1437-2)
INT
31708
(1687-58)
EXH
31656
(1437-69)
183
VALVE SEAT
1982-86 SOHC Vin O, J - incl. Turbo,
Pontiac (Brazil) Eng.
Buick Skyhawk, Oldsmobile Firenza;
Pontiac J-2000, Sunbird (Alum. Head)
L4
112ci/1835cc/1.8L
3.338"(84.8mm) Bore
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L4
116ci/1.9L
3.228" (82mm) Bore
1991-99 DOHC LLO Vin 7 Saturn Eng.
Saturn SC1, SC2, SL, SL1, SL2, SLC,
SW1, SW2 Series Passenger Cars
INT
31638
1.3820
1.107
.237
1.272
1.1320
0.890
.237
1.081
1.6920
1.438
.219
1.600
1.4425
1.219
.219
1.378
1.8195
1.500/1.555
.278
1.695
1.5695
1.265/1.320
.280
1.457
1.8190
1.405
.315
1.692
1.5050
1.215
.310
1.437
1.8190
1.440/1.508
.316
1.692
1.5050
1.215
.310
1.437
1.8195
1.500/1.555
.278
1.695, 1.732
1.5695
1.265/1.320
.280
1.457
1.5060
1.175/1.235
.236
1.437
1.3190
1.042
.238
1.238
1.5060
1.180/1.280
.214
1.398
1.2570
0.905/1.000
.230
1.182
1.5060
1.175/1.235
.236
1.437
1.3190
1.042
.238
1.238
1.7550
1.500
.250
1.620
1.4440
1.250
.219
1.375
1.8180
1.563
.219
1.720
1.5680
1.312
.219
1.500
1.6300
1.375
.219
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.250
1.500
(1375-60)
EXH
31607
(1125-53)
L4
121ci/1994cc/2.0L
3.504" (89mm) Bore
L4
122ci/2.0L
3.386" (86mm) Bore
1983-86 OHV Vin B & P Chevrolet Eng. incl. Turbo. Buick Skyhawk; Cadillac
Cimarron; Chevrolet Beretta, Cavalier;
Pontiac J-2000, Sunbird
1987-90 OHV Vin 1, B, P Chevrolet Eng. - incl.
Turbo. Buick Skyhawk; Cadillac Cimarron;
Chevrolet Beretta, Cavalier, Corsica;
Olds Firenza; Pontiac Sunbird, Tempest
1987-91 SOHC Vin K, M Pontiac (Brazil) Eng.
incl Turbo. Buick Skyhawk; Oldsmobile
Firenza; Pontiac Grand Am, Le Mans,
Sunbird
1992-94 SOHC Vin H Pontiac (Brazil) Eng.
Buick Skyhawk; Pontiac Le Mans,
Sunbird
INT
30664
(1687-2)
EXH
INT
31031
71031
(1437-2)
(1437-2N)
31285
(1812-55)
EXH
INT
31286
71286
(1562-66)
(1562-66N)
31137
(1812-54)
EXH
INT
30716
70716
(1500-62)
(1500-62N)
31327
(1812-52)
EXH
30716
(1500-62)
L4
134ci/2.2L
3.504" Bore
L4
138ci/2260cc/2.3L
3.620" (92mm)Bore
L4
140ci/2.3L
3.500" Bore
1990-98 OHV Vin 4, 6, G Chevrolet Eng. Buick
Century, Skyhawk; Chevrolet Beretta,
Cavalier, Corsica, Lumina; Oldsmobile
Cierra; Pontiac Sunfire, Tempest
1987-95 DOHC Vin A, D 16 valve Oldsmobile
Quad 4 Eng. Buick Skylark; Chevrolet
Beretta GTZ, Beretta Z-26, Cavalier;
Oldsmobile Achieva, Calais, Cutlass,
Silhouette Van, Pontiac Grand Am, Grand Prix
1987-94 Vin A, D DOHC Olds Quad 4 Alt. Intake
seat w 1.398 vl. hd., .214 depth
Vin A, D DOHC Olds Quad 4 Alt. Exhaust
seat w 1.182 vl. hd., .230 depth
1990-94 SOHC Vin 3 8 valve Oldsmobile Eng.
Buick Skylark, Oldsmobile Achieva,
Pontiac Grand Am.
1971-77 SOHC Chevrolet Eng.
Chevrolet Monza, Vega; Oldsmobile
Starfire; Pontiac Astre, Sunbird
INT
31285
(1812-55)
EXH
31286
(1562-66)
INT
31205
(1500-77)
EXH
INT
30779
70779
(1312-67)
(1312-67N)
31207
(1500-74)
EXH
INT
30230
70230
(1250-56)
(1250-56N)
31205
(1500-77)
EXH
INT
30779
70779
(1312-67)
(1312-67N)
30659
(1750-1)
EXH
30556
VALVE SEAT
(1437-1)
L4
151ci/2.5L
4.000" Bore
L4
153ci/2.5L
3.875" Bore
1977-93 OHV Vin 1, 2, 5, 9, A, E, F, R, U, V
Pontiac Eng, (California). Buick Century,
Skylark, Somerset Regal; Chevrolet
Camaro, Celebrity, Citation, Lumina, Monza;
Oldsmobile Calais, Cierra, Omega,
Starfire; Pontiac Astre, Fiero, Firebird,
Grand Am, Phoenix, Sunbird, Ventura II, 6000
1977-87 Alt. exh. Seat for vin & model
applications above
1962-70 OHV Chevrolet Eng.
Chevrolet Chevy II, Nova
INT
30667
(1812-4)
EXH
EXH
30643
70643
(1562-1)
(1562-1N)
30648
(1625-1)
INT
30530
(1812-3)
EXH
30503
(1562-2)
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
184184
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V6
173ci/2835cc/2.8L
3.504" (89mm) Bore
1980-90 OHV Vin 1, 7, X Chevrolet Eng w
Cast Iron Heads - Carb & F.I.
Buick Century, Regal, Skylark;
Cadillac Cimarron; Chevrolet Beretta,
Camaro, Cavalier, Celebrity, Citation,
Corsica; Oldsmobile Cierra, Cutlass,
Firenza, Omega; Pontiac Fiero, Firebird,
Grand Prix, Phoenix, Tempest, 6000
1981-90 OHV Vin 9, L, S, W, Z Chevrolet Eng w
Cast Iron Heads - Carb & F.I.
Late model applications as above
30664
1.6920
1.438
.219
1.600
1.4425
1.126
.219
1.307
1.8180
1.563
.219
1.718
1.5050
1.250
.219
1.425
1.7570
1.468
.276
1.718
1.5060
1.230
.278
1.425
1.8180
1.500/1.625
.219
1.710
1.5680
1.312/1.390
.250
1.500
1.8180
1.500/1.625
.219
1.710
1.5680
1.312/1.390
.219
1.500
1.8180
1.563
.219
1.718
1.5050
1.250
.219
1.425
1.7570
1.468
.276
1.718
1.5060
1.230
.278
1.425
1.8180
1.563
.219
1.718
1.5050
1.250
.219
1.425
1.8810
1.625
.281
1.5060
1.230
.278
1.425
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.250
1.500
1.7550
1.500
.250
1.625
1.5050
1.250
.219
1.425
(1687-2)
EXH
INT
30801
70801
(1437-4)
(1437-4N)
30667
(1812-4)
EXH
INT
1987-90 OHV Vin W Chevrolet Eng w
Aluminum Heads - Carb. & F.I.
Late model applications as above
V6
181ci/3.0L
3.800" Bore
INT
30711
70711
(1500-1)
(1500-1N)
31715
(1750-65)
EXH
INT
1982-84 OHV Vin L Buick Eng - Carb.
Buick Century; Oldsmobile Cutlass
Cierra
31244
71244
(1500-73)
(1500-73N)
30530
(1812-3)
EXH
30503
(1562-2)
V6
189ci/3.1L
3.503" Bore
OHV Vin J Chevrolet Eng w Aluminum
Heads. GM Passenger Cars, see above.
EXH
INT
Chevrolet Chevelle, Chevy II, Malibu,
Nova, El Camino
30541
70541
(1562-9)
(1562-9N)
30667
(1812-4)
EXH
INT
30711
70711
(1500-1)
(1500-1N)
31715
(1750-65)
EXH
INT
31244
71244
(1500-73)
(1500-73N)
30667
(1812-4)
EXH
INT
30711
70711
(1500-1)
(1500-1N)
30683
(1875-4)
EXH
L6
194ci/3.2L
3.562" Bore
30530
(1812-3)
INT
31244
71244
(1500-73)
(1500-73N)
30530
(1812-3)
EXH
30503
(1562-2)
V6
196ci/3.2L
3.500" Bore
1978
OHV Buick Eng.
Buick Century, Regal; Chevrolet Monza
INT
30659
(1750-1)
EXH
30711
(1500-1)
185
VALVE SEAT
2000
INT
1985-88 OHV Vin L Buick Eng. - F.I.
Buick Century, Electra, Le Sabre, Limited,
Park Avenue, Skylark, Somerset,
Regal; Oldsmobile Calais, Delta 88,
Regency, 88, 98; Pontiac Grand Am
1988-95 OHV Vin D, T, V-Turbo Chevrolet Eng.
w Cast Iron Heads. Buick Century,
Regal, Skylark; Chevrolet Beretta,
Camaro, Cavalier, Celebrity, Corsica,
Lumina APV-Mini Van; Oldsmobile
Achieva, Cierra, Silhouette Van; Pontiac
Firebird, Grand Am, Grand Prix, Sunbird,
Tempest, Trans Sport Van, 6000
1988-94 OHV Vin T, V, V-Turbo, W Chevrolet
Eng. w Aluminum Heads. Buick Century,
Regal, Skylark; Chevrolet Beretta,
Beretta GTZ (Turbo), Beretta Z-26,
Camaro, Cavalier, Celebrity, Corsica,
Lumina APV-Mini Van; Monte Carlo, Olds.
Achieva, Cierra, Silhouette Van; Pontiac
Firebird, Grand Am, Grand Prix/Turbo,
Sunbird, Tempest, Trans Sport Van, 6000
1995-99 OHV Vin M Chevrolet Eng. w Aluminum
Heads. Late model applications
as above
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V6
196ci/3.2L
3.500" Bore
1979
OHV Buick Eng.
Buick Century, Regal; Chevrolet Monza
INT
30530
1.8180
1.500/1.625
.219
1.710
1.5680
1.312/1.390
.250
1.500
1.6300
1.375
.219
1.500
1.3800
1.125
.188
1.313
1.6920
1.438
.219
1.600
1.4425
1.219
.219
1.380
1.7550
1.500
.219
1.710
1.5680
1.312/1.390
.219
1.490
1.8180
1.563
.219
1.718
1.5050
1.250
.219
1.425
1.5060
1.230
.278
1.437
1.3820
1.102/1.160
.260
1.260
1.6300
1.375
.219
1.500
1.4425
1.188
.219
1.313
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.250
1.500
1.6920
1.438
.219
1.641
1.5680
1.312
.219
1.500
1.7550
1.500
.250
1.625
1.4425
1.188
.219
1.375
1.9440
1.688
.250
1.840
1.5680
1.312
.219
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.250
1.500
(1812-3)
EXH
30503
(1562-2)
V6
198ci/3.2L
3.625" Bore
INT
1962-64 OHV Buick Eng.
Buick Skylark, Special
30648
(1625-1)
EXH
30790
(1375-4)
V6
200ci/3.3L
3.500" Bore
Chevrolet Caprice, Chevelle, Impala,
Malibu, Monte Carlo
INT
30664
(1687-2)
EXH
31031
(1437-2)
V6
204ci/3.3L
3.700" Bore
V6
207ci/3.4L
3.622" (92mm) Bore
V8
215ci/3.5L
3.500" Bore
1989-93 OHV Vin N Buick Eng.
Buick Century, Skylark; Oldsmobile
Achieva, Calais, Cierra; Pontiac
Grand Am
1993-98 OHV Vin S Chevrolet Eng. Chev.
Camaro, Monte Carlo; Lumina, Mini-Van,
Venture; Olds Alero, Silhouette Van;
Pontiac Firebird, Grand Prix, Trans Sport
1991-98 DOHC 24 Valve Vin R, X Chevrolet Eng.
Chevrolet Lumina, Lumina Z-34,
Monte Carlo Z-34, Olds Cutlass
Buick Skylark, Special; Oldsmobile
F-85; Pontiac Le Mans, Tempest
INT
30658
(1750-2)
EXH
INT
30541
70541
(1562-9)
(1562-9N)
30667
(1812-4)
EXH
30711
(1500-1)
INT
31244
(1500-73)
EXH
INT
30238
70238
(1375-56)
(1375-56N)
30648
(1625-1)
EXH
31030
(1437-3)
L6
215ci/3.5L
3.750" Bore
INT
1964-65 OHV Pontiac Eng.
Pontiac Le Mans, Tempest
30530
(1812-3)
EXH
30503
(1562-2)
L6
216ci/3.5L
3.500" Bore
INT
Chevrolet Passenger Cars
30664
(1687-2)
EXH
30643
(1562-1)
V6
225ci/3.7L
3.750" Bore
Buick Skylark, Special; Oldsmobile F-85
INT
30659
(1750-1)
EXH
31030
VALVE SEAT
(1437-3)
V6
229ci/3.8L
3.736" Bore
L6
230ci/3.8L
3.875" Bore
1980-84 OHV Vin 9, K Chevrolet Eng.
Chevrolet Camaro, Caprice, Chevelle,
Impala, Malibu, Monte Carlo; Pontiac
Grand Am, Grand Prix, Le Mans, Safari
Chevrolet Bel Air, Biscayne, Camaro,
Chevelle, Chevy II, Concours, Impala,
Malibu, Nova; Pontiac Firebird, Le Mans,
Safari, Tempest
INT
EXH
30643
(1562-1)
INT
30530
(1812-3)
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
186186
30560
(1937-1)
30503
(1562-2)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V6
231ci/3800cc/3.8L
3.800" Bore
L6
235ci/3.9L
3.563" Bore
1975-78 OHV Vin A, C, G-Turbo
& 2 (California) Buick Eng. - Carb.
Buick Apollo, Century, Estate Wagon,
Le Sabre, Regal, Riviera, Skylark, Special;
Chevrolet Caprice, Chevelle, Impala,
Malibu, Monte Carlo, Monza; Oldsmobile
Custom Cruiser, Cutlass, Delta 88,
Omega, Starfire, Vista Cruiser, 88;
Pontiac Bonneville, Catalina, Firebird,
Grand Am, Grand Prix, Le Mans, Phoenix,
Safari, Sunbird, Ventura
1976-98 OHV Vin A, B, C, K, L & 2 (California),
3, 7, 8, 9 Buick Eng incl. Turbo - Carb. & F.I.
Buick Century, Electra, Estate Wagon,
Grand National Turbo, Le Sabre, Limited,
Park Avenue, Regal, Riviera, Skylark,
Special; Chevrolet Camaro, Caprice,
Chevelle, Impala, Malibu, Monte Carlo,
Monza, Nova; Oldsmobile Cierra, Custom
Cruiser, Cutlass, Delta 88, Omega, Regency,
Royale, Starfire, Toronado, Vista Cruiser,
88, 98; Pontiac Bonneville, Catalina,
Firebird, Grand Am, Grand Prix, Le Mans,
Parisienne, Phoenix, Safari, Sunbird
1988-98 OHV Vin C, E, K, & L Buick Eng. F.I. Vin 1 Buick Eng. -Supercharged F.I.
(1991-98). Buick Electra, Grand National,
Le Sabre, Limited, Park Avenue (Ultra),
Reatta, Regal, Riviera, Ultra; Chevrolet
Camaro, Lumina, Lumina APV; Oldsmobile
Cutlass, Delta 88, Regency, Royale,
Silhouette Van, Toronado, Trofeo, 88, 98;
Pontiac Bonneville, Firebird, Trans Sport Van
Chevrolet Passenger Cars Incl. Bel Air,
Biscayne, Corvette, Impala
INT
30658
1.7550
1.500
.219
1.625
1.5050
1.250
.219
1.425
1.8180
1.500/1.625
.219
1.710
1.5680
1.312/1.390
.219
1.500
1.7550
1.500
.219
1.710
1.5680
1.312/1.390
.219 1.490&1.520
1.5680
1.250
.219 1.490&1.520
1.9420
1.688
.219
1.875
1.5680
1.312/1.390
.219
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.219
1.500
1.5680
1.312
.219
1.500
1.5680
1.312/1.390
.250
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.250
1.500
1.5680
1.312/1.390
.219
1.500
(1750-2)
EXH
INT
30711
70711
(1500-1)
(1500-1N)
30530
(1812-3)
EXH
INT
30541
70541
(1562-9)
(1562-9N)
30658
(1750-2)
EXH
EXH
INT
30541
70541
(1562-9)
(1562-9N)
30640
70640
(1562-6)
(1562-6N)
30936
(1937-17)
EXH
30541
(1562-9)
L6
250ci/4.1L
3.875" Bore
INT
30530
(1812-3)
EXH
70541
(1562-9N)
30643
(1562-1)
EXH
30503
(1562-2)
INT
1966-79 LPG, Propane, Natural Gas
EXH
30530
70530
(1812-3)
(1812-3N)
70503
(1562-2N)
EXH
70541
(1562-9N)
187
VALVE SEAT
INT
30541
(1562-9)
Buick Apollo, Skylark, Special; Chevrolet
Bel Air, Biscayne, Brookwood, Camaro,
Caprice, Chevelle, Chevy II, Concours,
Estate Wagon, Greenbrier, Impala,
Kingswood, Laguna, Malibu, Nova,
Townsman; Oldsmobile Cutlass, F-85,
Omega, Vista Cruiser; Pontiac Firebird,
Le Mans, Safari, T-37, Tempest, Ventura
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8
252ci/4097cc/4.1L
3.464" (88mm) Bore
1982-88 OHV Vin 7, 8 Cadillac Eng.
Cadillac Alliante, CC, Deville, Eldorado,
Fleetwood, Seville, 75 Series
INT
30857
1.6300
1.348
.219
1.535
1.3800
1.125
.219
1.299
1.8180
1.500/1.625
.219
1.710
1.5680
1.312/1.390
.219
1.500
1.6920
1.438
.219
1.522
1.4425
1.126
.219
1.300
1.9445
1.674/1.734
.276
1.875
1.7570
1.468
.276
1.622
1.9420
1.688
.219
1.875
1.7550
1.438
.219
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.250
1.500
2.0060
1.750
.188
1.937
2.1300
1.812
.250
1.937
1.5680
1.312
.219
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.250
1.500
1.6920
1.438
.219
1.600
1.4425
1.219
.219
1.385
1.8180
1.500/1.625
.219
1.720
1.4425
1.219
.219
1.380
1.5680
1.312
.219
1.500
(1625-11)
EXH
30558
(1375-1)
V6
252ci/4.1L
3.965" Bore
V8
260ci/4.3L
3.500" Bore
V6
260ci/4.3L
4.057" Bore
V8
262ci/4.3L
3.671" Bore
1980-84 OHV Vin 4 Buick Eng.
Buick Electra,
Estate Wagon, Le Sabre, Limited, Park
Avenue, Regal, Riviera; Cadillac Deville,
Eldorado, Fleetwood, Seville; Oldsmobile
Regency, Toronado, Vista Cruiser, 88,
98; Pontiac Bonneville, Grand Prix
1975-82 OHV Oldsmobile Gas Eng.
Buick Apollo, Skylark; Oldsmobile
Omega, Vista Cruiser, 88, Le Mans,
Safari, Ventura
1982-85 Oldsmobile Vin T,V Diesel Eng. (Alum.
Head). Buick Century, Electra, Limited,
Park Ave, Regal; Cadillac Deville,
Fleetwood; Chevrolet Celebrity, Chevelle,
Impala, Malibu, Monte Carlo; Oldsmobile
Cierra, Custom Cruiser, Cutlass, Regency,
Vista Cruiser, 88, 98; Pontiac Bonneville,
Grand Prix, 6000
1982-85 Oldsmobile Vin T, V Diesel Eng. w EGR
(Cast Iron Head). Buick Century,
Electra, Limited, Park Avenue, Regal;
Cadillac Deville, Fleetwood; Chevrolet
Celebrity, Chevelle, Impala, Malibu, Monte
Carlo; Oldsmobile Cierra, Custom Cruiser,
Cutlass, Regency, Vista Cruiser, 88, 98;
Pontiac Bonneville, Grand Prix, 6000
1975-76 OHV V-8 Chevrolet Eng. - Carb.
Chevrolet, Oldsmobile, Pontiac
Passenger Cars
INT
30530
(1812-3)
EXH
30541
(1562-9)
INT
30664
(1687-2)
EXH
30801
(1437-4)
INT
31750
(1937-53)
EXH
INT
31715
71715
(1750-65)
(1750-65N)
30936
(1937-17)
EXH
INT
30655
70655
(1750-3)
(1750-3N)
30530
(1812-3)
EXH
30503
(1562-2)
V6
262ci/4.3L
4.000" Bore
1985-99 OHV V-6 Vin W, Z Chevrolet Eng. - F.I.
Buick Regal; Chevrolet Caprice, Impala,
Monte Carlo, Monza, Nova; Oldsmobile
Bravada; Pontiac Bonneville, Grand Prix,
Parisienne
INT
30690
(2000-36)
INT
30557
(2125-1)
EXH
30643
VALVE SEAT
(1562-1)
V8 - Chev. Eng.
265ci/4.3L
3.750" Bore
Corvette, Nomad, 150, 210
INT
30530
(1812-3)
EXH
30503
(1562-2)
V8 - Pontiac Eng.
265ci/4.3L
3.750" Bore
V8
267ci/4.4L
3.500" Bore
Buick Century, Regal; Pontiac
Bonneville, Catalina, Firebird, Grand
Am, Grand Prix, Le Mans, Safari
1979-82 OHV Vin J Chevrolet Eng. Buick Century,
Estate Wagon, Le Sabre, Regal;
Chevrolet Camaro, Caprice, Chevelle,
Impala, Malibu, Monte Carlo; Oldsmobile
Vista Cruiser, 88; Pontiac Bonneville,
Catalina, Firebird, Grand Prix
Vista Cruiser, 88; Pontiac Bonneville,
INT
EXH
31031
(1437-2)
INT
30530
(1812-3)
EXH
31031
(1437-2)
EXH
188188
30664
(1687-2)
30643
(1562-1)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8
273ci/4.5L
3.622" (92mm) Bore
V8
283ci/4.6L
3.875" Bore
V8
300ci/4.9L
3.750" Bore
1988-89 OHV Vin 5 Cadillac Eng.
Cadillac Allante, Commercial (CC),
Deville, Eldorado, Fleetwood, Seville,
60 Special, 75 Limousine
1989-92 OHV Vin 3, 8 Cadillac Eng.
Cadillac Allante, Commercial (CC),
Deville, Eldorado, Fleetwood, Seville,
Biscayne, Camaro, Caprice, Chevelle,
Chevy II, Concours, Corvette, Impala,
Malibu, Nomad, Nova, 150, 210
Buick Estate Wagon, Le Sabre, Skylark,
Special, Sportwagon
INT
30648
1.6300
1.375
.219
1.535
1.3800
1.125
.219
1.299
1.8180
1.625
.219
1.772
1.5680
1.312
.219
1.496
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.250
1.500
1.8810
1.625
.219
1.815
1.4425
1.188
.219
1.375
1.8810
1.625
.219
1.772
1.5680
1.312
.219
1.496
1.8180
1.563
.219
1.720
1.6300
1.375
.219
1.500
2.1300
1.875
.219
2.020
1.6920
1.438
.219
1.600
1.8180
1.500/1.625
.219
1.720
1.9420
1.688
.219
1.840
1.5680
1.312
.219
1.500
1.9420
1.688
.219
1.840
1.5680
1.312
.219
1.500
(1625-1)
EXH
30558
(1375-1)
INT
31283
(1812-12)
EXH
30643
(1562-1)
INT
30530
(1812-3)
EXH
30503
(1562-2)
INT
30681
(1875-6)
EXH
31030
(1437-3)
V8
300ci/4.9L
3.662"(92mm) Bore
V8
301ci/4.9L
4.000" Bore
V8
302ci/5.0L
4.000" Bore
V8 - Chevrolet
305ci/5.0L
3.736" Bore
1991-95 OHV Vin Type B Cadillac Eng.
Cadillac Commercial (CC), Deville,
Eldorado, Fleetwood, Seville,
1977-81 OHV Vin W, Y Pontiac Eng. incl. Turbo
Le Sabre, Limited, Park Avenue, Regal,
Riviera, Skylark; Chevrolet Camaro;
Oldsmobile Custom Cruiser, Delta 88, 88;
Grand Am, Grand Prix, Le Mans, Phoenix,
Safari, Ventura
Chevrolet Camaro, Camaro Z-28
189
EXH
30643
(1562-1)
INT
30667
(1812-4)
EXH
30648
70648
(1625-1)
(1625-1N)
30974
(2125-34)
INT
INT
EXH
INT
EXH
30664
70664
(1687-2)
(1687-2N)
30530
70530
(1812-3)
(1812-3N)
30936
70936
(1937-17)
(1937-17N)
30643
70643
(1562-1)
(1562-1N)
30936
70936
(1937-17)
(1937-17N)
30643
70643
(1562-1)
(1562-1N)
VALVE SEAT
30681
(1875-6)
1976-88 Chevrolet Eng. Vin G, H, U incl.
LPG, Propane, Natural Gas - Carb.
Riviera, Skylark; Chevrolet Camaro,
Caprice, Chevelle, Corvette, Impala,
Laguna, Malibu, Monte Carlo, Monza,
Nova; Oldsmobile Custom Cruiser,
Cutlass, Delta 88, Omega, Regency,
Starfire, Vista Cruiser, 88, 98; Pontiac
Bonneville, Catalina, Firebird, Grand Am,
Grand Prix, Le Mans, Parisienne, Phoenix,
Safari, Sunbird, Ventura
1980-98 Chevrolet Eng. Vin 5, 7, E, F, G, H incl.
LPG, Propane, Natural Gas - F.I.
Buick Electra, Estate Wagon, Le Sabre,
Limited, Park Avenue, Regal, Roadmaster;
Cadillac Brougham, Commercial (CC),
Fleetwood; Chevrolet Camaro, Caprice,
Impala, Monte Carlo; Oldsmobile Custom
Cruiser, Cutlass, Delta 88, Regency, 88,
98; Pontiac Bonneville, Catalina, Firebird,
Grand Am, Grand Prix, Parisienne
INT
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8 - Olds Eng.
307ci/5.0L
3.800" Bore
V8 - Chev Eng.
307ci/5.0L
3.875" Bore
V8
326ci/5.3L
3.7188" Bore
1980-90 OHV Oldsmobile Vin 9, Y Series Eng. incl.
Hi-Output. Buick Electra, Estate Wagon,
Riviera; Cadillac Brougham,
Commercial (CC), Fleetwood; Chevrolet
Caprice, Impala; Oldsmobile Custom
Cruiser, Cutlass, Delta 88, Regency,
Toronado, Vista Cruiser, 442, 88, 98;
Pontiac Bonneville, Catalina, Parisienne, Safari
1968-73 OHV Chevrolet Vin A Series Eng.
Chevrolet Bel Air, Biscayne, Brookwood,
Camaro, Caprice, Chevelle, Chevy II,
Concours, Estate Wagon, Greenbrier,
Kingswood, Laguna, Malibu, Nova,
Townsman; Pontiac Ventura, T-37
Pontiac Firebird, Le Mans, Safari,
Tempest
INT
30509
1.8800
1.562
.250
1.750
1.5680
1.312
.219
1.502
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.250
1.500
2.0060
1.750
.219
1.920
1.7550
1.500
.219
1.640
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.250
1.500
2.0050
1.813
.219
1.940
1.5680
1.312/1.390
.250
1.500
2.1300
1.875
.219
2.020
1.6920
1.438
.219
1.600
2.0060
1.750
.219
1.875
1.6920
1.438
.219
1.562
1.8810
1.625
.219
1.815
1.4425
1.219
.219
1.375
2.2555
1.938
.188
2.065
1.8180
1.563
.219
1.720
2.0060
1.750
.219
1.875
1.6300
1.375
.219
1.500&1.550
(1875-2)
EXH
INT
30643
70643
(1562-1)
(1562-1N)
30530
(1812-3)
EXH
INT
30503
70503
(1562-2)
(1562-2N)
30691
(2000-1)
EXH
30658
(1750-2)
V8
327ci/5.3L
4.000" Bore
Chevrolet Bel Air, Biscayne,
Brookwood, Camaro, Caprice, Chevelle,
Chevy II, Concours, Corvette, Estate
Wagon, Impala, Kingswood, Malibu,
Nova, Townsman
1962-64 Chevrolet High Performance, Special
High Performance and F.I.
INT
EXH
INT
INT
1964-67 OHV Oldsmobile Eng., First & Second
Series. Oldsmobile Cutlass, F-85,
Jetstar, Vista Cruiser, 88 Models
70503
(1562-2N)
30952
30503
70503
(1562-2)
(1562-2N)
30974
(2125-34)
EXH
V8
330ci/5.4L
3.9375" Bore
30503
(1562-2)
(2000-7)
EXH
1965-69 Chevrolet High Performance, Special
High Performance and F.I.
30530
(1812-3)
INT
30664
70664
(1687-2)
(1687-2N)
30691
(2000-1)
EXH
30664
(1687-2)
V8
340ci/5.6L
3.750" Bore
Buick Gran Sport, Le Sabre, Skylark,
Special, Sportwagon
INT
30681
(1875-6)
EXH
31030
VALVE SEAT
(1437-3)
V8
348ci/5.7L
4.1250" Bore
V8 - Buick Eng.
350ci/5.7L
3.800" Bore
Chevrolet Bel Air, Biscayne, Impala
INT
EXH
1968-81 OHV Buick Vin Type B, H, J, X Eng.
Buick Apollo, Centurion, Century,
Electra, Estate Wagon, Gran Sport,
LeSabre, Limited, Park Avenue, Regal,
Riviera, Skylark, Special, Sportwagon
Oldsmobile Omega; Pontiac Ventura
INT
30667
70667
(1812-4)
(1812-4N)
30691
(2000-1)
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
190190
30989
(2250-1)
30648
70648
(1625-1)
(1625-1N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8 - Pontiac Eng.
350ci/5.7L
3.875" Bore
1968-77 OHV Pontiac including Vin M, P Eng.
Grand Am, Grand Prix, Grand Ville,
GTO, Le Mans, Phoenix, Safari, T-37,
Tempest, Ventura II
Exh. Valve w 1.770 vl. hd., 250 depth
V8 - Chev. L Eng.
350ci/5.7L
4.000" Bore
1967-82 Chevrolet including Vin L Eng.
Buick Passenger Cars;
Camaro, Caprice (Classic), Chevelle,
Chevy II, Concours, Corvette, Estate
Wagon, Greenbrier, Impala, Kingswood,
Laguna, Malibu, Monte Carlo, Nova,
Townsman; Oldsmobile, Pontiac Pass. Cars
Optional Exh. Seats for Late Model GM
cyl heads above w Thin Wall Sections:
Exh. Valve w 1.500 vl. hd., .188 depth
Chevrolet Vin Type G, L Eng. High
Performance & Special High
Performance - w 2.020 int. vl. hd.
INT
INT
2.0060
1.750
.219
1.960
30537
2.1300
1.875
.250
2.110
1.7550
1.500
.219
1.660
1.8180
1.563
.250
1.770
2.0050
1.8125
.219
1.940
1.5680
1.313
.219
1.500
1.5680
1.313
.188
1.500
1.5680
1.312/1.390
.219
1.500
1.5050
1.215/1.344
.219
1.500
2.1300
1.875
.219
2.020
1.6920
1.438
.219
1.600
2.0060
1.750
.219
1.940
1.5680
1.312
.219
1.500
2.0050
1.8125
.219
1.940
1.5680
1.312
.219
1.500
1.6300
1.313
.250
1.500
1.5680
1.313
.188
1.500
1.5680
1.312/1.390
.219
1.500
1.5050
1.215/1.344
.219
1.500
2.1300
1.875
.219
2.020
1.6920
1.438
.219
1.600
2.0060
1.750
.219
1.940
1.5680
1.312
.219
1.500
(2125-2)
EXH
EXH
INT
30658
70658
(1750-2)
(1750-2N)
30671
70671
(1812-1)
(1812-1N)
30952
(2000-7)
INT
EXH
EXH
EXH
INT
30643
70643
(1562-1)
(1562-1N)
30840
70840
(1562-36)
(1562-36N)
30541
30541
(1562-9)
(1562-9N)
30705
70705
(1500-4)
(1500-4N)
30974
(2125-34)
EXH
INT
Chevrolet Vin Type L Eng.
LPG, Propane, Natural Gas
30691
(2000-1)
30664
70664
(1687-2)
(1687-2N)
30691
(2000-1)
EXH
70643
(1562-1N)
V8 - Chev. Vin 7,
P Eng.
350ci/5.7L
4.000" Bore
1982-98 Chevrolet Vin 7, P Eng.
Buick Roadmaster; Cadillac Brougham,
Fleetwood; Chevrolet Camaro, Caprice
Classic, Corvette, Impala; Oldsmobile
Passenger Cars incl. Custom Cruiser,
Cutlass; Pontiac Passenger Cars incl.
Firebird
INT
Exh. valve seat for Vortex Heads
EXH
1982-93 Chevrolet Vin 7, P Eng. High
Performance & Special High Performance
EXH
EXH
EXH
INT
70643
(1562-1N)
30650
70650
(1625-3)
(1625-3N)
30840
70840
(1562-36)
(1562-36N)
30541
30541
(1562-9)
(1562-9N)
30705
70705
(1500-4)
(1500-4N)
30974
(2125-34)
EXH
INT
1982-96 Chevrolet Vin 7, P Eng.
30643
(1562-1)
EXH
30664
70664
(1687-2)
(1687-2N)
30691
70691
(2000-1)
(2000-1N)
70643
(1562-1N)
191
VALVE SEAT
EXH
Optional Exh. Seats for Late Model GM
cyl heads above w Thin Wall Sections:
30952
(2000-7)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8-Olds/Cad. Eng.
350ci/5.7L
4.057" Bore
1968-71 Oldsmobile & Cadillac Vin R Eng.
Buick Passenger Cars; Cadillac
Passenger Cars incl. Seville; Oldsmobile
Passenger Cars incl. Custom Cruiser,
Cutlass, Delmont 88, Delta 88,
Dynamic 88, F-85, Omega, Regency,
Toronado, Vista Cruiser, 88, 98; Pontiac
Passenger Cars
1968-80 Oldsmobile & Cadillac Vin R Eng.
Exh. Valve w 1.624 vl. hd., .219 depth (1972-76)
Exh. Valve w 1.502 vl. hd., .250 depth (1977-80)
1973-85 OHV Cadillac Vin B, 8 Eng.
Cadillac Commercial (CC), Seville;
Oldsmobile Passenger Cars incl. Custom
Cruiser, Cutlass, Delta 88, Omega,
Regency, Toronado; Pontiac Passenger
Cars
V8
364ci/6.0L
4.125" Bore
VALVE SEAT
V8
368ci/6.0L
3.800" Bore
V8
389ci/6.4L
4.0625" Bore
1978-85 Oldsmobile Vin N Diesel Eng.
Buick Electra, Estate Wagon, Regal,
Riviera; Cadillac Commercial (CC), Deville,
Eldorado, Seville; Chevrolet Caprice Classic,
Chevelle, Impala, Malibu, Monte Carlo;
Oldsmobile Custom Cruiser, Delta 88,
Toronado, Vista Cruiser, 88, 98; Pontiac
Bonneville, Catalina, Grand Am, Grand
Prix, Le Mans, Parisienne, Safari
Buick Century, Estate Wagon, Le Sabre,
Limited, Roadmaster, Special, Super
1980-84 OHV Vin 6, 9 Cadillac - Carb. & F.I. Eng.
Eldorado, Fleetwood, Seville
Pontiac Bonneville, Catalina, Executive,
Grand Prix, GTO, Le Mans, Safari, Star
Chief, Tempest, Ventura, Vista
INT
EXH
INT
V8
394ci/6.5L
4.125" Bore
1959-63 OHV Cadillac Eng.
Eldorado, Fleetwood, 60, 62, 75 Series
EXH
EXH
INT
1.875
.250
1.995
30664
70664
(1687-2)
(1687-2N)
1.6920
1.438
.219
1.562
30691
2.0060
1.750
.219
1.875
30677
70677
(1687-5)
(1687-5N)
1.6920
1.375
.219
1.622
30503
70503
(1562-2)
(1562-2N)
1.5680
1.312/1.390
.250
1.502
30691
2.0060
1.750
.219
1.875
2.1300
1.875
.250
1.995
1.5680
1.312/1.390
.250
1.502
1.6920
1.438
.219
1.562
1.7550
1.500
.219
1.624
2.0060
1.750
.219
1.875
1.6920
1.438
.188
1.622
2.0060
1.750
.219
1.875
1.6300
1.375
.219
1.500&1.550
1.8180
1.563
.219
1.750
1.5680
1.312/1.390
.219
1.500
1.9440
1.688
.250
1.881
1.6920
1.438
.219
1.600
2.0060
1.750
.219
1.920
1.7550
1.500
.219
1.640
1.9440
1.688
.250
1.881
1.6300
1.313
.219
1.500
1.9440
1.688
.250
1.881
1.6920
1.438
.219
1.563
(2000-1)
INT
30537
(2125-2)
EXH
EXH
EXH
INT
30503
70503
(1562-2)
(1562-2N)
30664
70664
(1687-2)
(1687-2N)
30658
70658
(1750-2)
(1750-2N)
30691
(2000-1)
EXH
INT
30873
70873
(1687-16)
(1687-16N)
30691
(2000-1)
EXH
INT
30648
70648
(1625-1)
(1625-1N)
30667
(1812-4)
EXH
INT
30541
30541
(1562-9)
(1562-9N)
30560
(1937-1)
EXH
INT
30664
70664
(1687-2)
(1687-2N)
30691
(2000-1)
INT
30658
70658
(1750-2)
(1750-2N)
30560
(1937-1)
EXH
INT
1959-64 OHV Oldsmobile Eng.
Oldsmobile Jetstar, Starfire, 88, 98
2.1300
(2000-1)
EXH
V8
390ci/6.4L
4.000" Bore
30537
(2125-2)
30649
70649
(1625-4)
(1625-4N)
30560
(1937-1)
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
192192
30664
70664
(1687-2)
(1687-2N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8
396ci/6.5L
4.0938" Bore
V8 - Chev. Sm. Blk
400ci/6.6L
4.125" Bore
1965-70 OHV Chevrolet Big Block Eng. Including
High Performance & Special High Perf.
Camaro, Caprice, Chevelle, Chevy II,
Concours, Corvette, Estate Wagon,
Greenbrier, Impala, Kingswood, Malibu,
Nova, Townsman
1970-76 OHV Chevrolet - Small Block Eng.
Caprice, Chevelle, Concours, Estate
Wagon, Greenbrier, Impala, Laguna,
Malibu, Monte Carlo
Exh. Seat for (1970 Eng)
1970-76 Chevrolet Small Bock LPG, Propane,
Natural Gas Eng. See applications
above
INT
30989
2.2555
1.938
.188
2.065&2.190
1.8180
1.563
.219
1.720
2.1300
1.812
.250
1.940
1.5680
1.312
.219
1.500
1.6920
1.438
.219
1.600
2.1300
1.812
.250
1.940
1.5680
1.312
.219
1.500
2.1300
1.875
.250
1.995
2.2555
1.938
.188
2.072
1.7550
1.500
.219
1.624
2.1300
1.875
.250
1.995
2.2555
1.938
.188
2.072
1.7550
1.500
.219
1.624
2.1300
1.875
.250
1.995
1.7550
1.500
.219
1.625
2.0060
1.750
.219
1.920
2.1300
1.812
.250
1.960
2.1300
1.875
.250
2.110
1.7550
1.500
.219
1.660
1.8180
1.563
.250
1.770
2.2555
1.938
.188
2.065&2.190
1.8180
1.563
.219
1.720
2.0060
1.750
.219
1.875
1.5680
1.312
.219
1.500
(2250-1)
EXH
INT
30667
70667
(1812-4)
(1812-4N)
30557
(2125-1)
EXH
EXH
INT
30643
70643
(1562-1)
(1562-1N)
30664
70664
(1687-2)
(1687-2N)
30557
(2125-1)
EXH
70643
(1562-1N)
V8 - Olds.
400ci/6.6L
3.870" Bore
Oldsmobile F-85, Vista Cruiser, 442
INT
INT
30537
(2125-2)
30989
(2250-1)
EXH
V8 - Olds H.P.
400ci/6.6L
4.000" Bore
1965-69 OHV Oldsmobile High Performance Eng.
Oldsmobile F-85, Vista Cruiser, 442
INT
70658
(1750-2N)
30537
(2125-2)
INT
30658
(1750-2)
30989
(2250-1)
EXH
V8 - Buick
400ci/6.6L
4.040" Bore
V8 - Pontiac
400ci/6.6L
4.120" Bore
V8 - Chev Big Blk
400ci/6.6L
4.125" Bore
V8
401ci/6.6L
4.1875" Bore
1970-72 Chevrolet Big Block Eng.
Caprice, Chevelle, Concours, Estate
Wagon, Greenbrier, Impala, Kingswood,
Malibu, Monte Carlo, Townsman
Buick Electra, Estate Wagon, GranSport,
Invicta, Le Sabre, Riviera, Wildcat
193
EXH
INT
30537
70537
(2125-2)
(2125-2N)
30658
70658
(1750-2)
(1750-2N)
30691
(2000-1)
INT
30557
(2125-1)
INT
30537
(2125-2)
EXH
EXH
INT
30658
70658
(1750-2)
(1750-2N)
30671
70671
(1812-1)
(1812-1N)
30989
(2250-1)
EXH
INT
30667
70667
(1812-4)
(1812-4N)
30691
(2000-1)
EXH
30643
70643
(1562-1)
(1562-1N)
VALVE SEAT
Alternate Exh. Valve w 1.770 vl. hd., .250 depth
INT
70658
(1750-2N)
Buick Passenger Cars including Electra,
Gran Sport, Le Sabre, Limited, Park
Avenue, Riviera, Skylark, Sportwagon
Buick Electra, Estate Wagon, Gran Sport,
Le Sabre, Limited, Park Avenue, Riviera,
Skylark, Sportwagon; Oldsmobile
Regency 88, 98; Pontiac Bonneville,
Catalina, Executive, Firebird, Grand Am,
Grand Prix, Grand Ville, Le Mans, Safari,
T-37, Tempest, Ventura
30658
(1750-2)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8
402ci/6.6L
4.125" Bore
V8
403ci/6.6L
4.351" Bore
V8
409ci/6.7L
4.3125" Bore
V8
421ci/6.9L
4.0938" Bore
V8 - Cad. Eng.
425ci/7.0L
4.082" Bore
V8 - Olds. Eng.
425ci/7.0L
4.125" Bore
1970-72 OHV Chevrolet Big Block Eng. Including
High Performance & Special High Perf.
Camaro, Caprice, Chevelle, Concours,
Estate Wagon, Greenbrier, Impala, Kingswood,
Malibu, Monte Carlo, Nova, Townsman
Riviera; Oldsmobile Custom Cruiser,
Cutlass, Delta 88, Regency, Toronado,
Vista Cruiser, 88, 98; Pontiac Passenger
Cars
Chevrolet Bel Air, Biscayne, Impala
INT
EXH
INT
Oldsmobile Delmont 88, Delta 88,
Dynamic 88, Starfire, Toronado, 88, 98
EXH
INT
1.938
.188
2.065&2.190
30667
70667
(1812-4)
(1812-4N)
1.8180
1.563
.219
1.720
31240
2.1310
1.813
.219
1.995
30541
70541
(1562-9)
(1562-9N)
1.5680
1.312/1.390
30989
2.2555
1.938
.188
2.065
1.8180
1.563
.219
1.720
2.0060
1.750
.219
1.920
1.7550
1.500
.219
1.640
2.1300
1.875
.250
1.995
1.7550
1.500
.219
1.625
2.1300
1.875
.250
1.995
1.7550
1.500
.219
1.624
2.2555
1.938
.188
2.072
2.0060
1.750
.219
1.5680
1.312
.219
2.2555
1.938
.188
2.065
1.8180
1.563
.219
1.720
2.3175
2.000
.250
2.190
2.0060
1.750
.219
1.880
2.1300
1.812
.250
1.960
2.1300
1.875
.250
2.110
1.7550
1.500
.219
1.660
1.8180
1.563
.250
1.770
1.9440
1.688
.250
1.875
1.6300
1.313
.219
1.500
.219
1.502
(2250-1)
INT
30667
70667
(1812-4)
(1812-4N)
30691
(2000-1)
EXH
INT
30658
70658
(1750-2)
(1750-2N)
30537
(2125-2)
EXH
INT
30658
70658
(1750-2)
(1750-2N)
30537
(2125-2)
EXH
INT
2.2555
(2125-31)
EXH
Grand Prix, GTO, Safari, Star Chief,
Ventura, Vista, 2+2
Eldorado, Fleetwood, 75 Series
30989
(2250-1)
30658
70658
(1750-2)
(1750-2N)
30989
(2250-1)
V8 - Buick Eng.
425ci/7.0L
4.313" Bore
VALVE SEAT
V-8
427ci/7.0L
4.250" Bore
INT
Buiick Electra, Gran Sport, Riviera,
Skylark, Wildcat
EXH
1966-69 OHV Chevrolet Eng. Chevrolet
Passenger Car incl: BelAir, Biscayne,
Brookwood, Camaro, Caprice, Corvette,
Estate Wagon, Impala, Kingswood,
Townsman
1966-69 Chevrolet High Performance & Special
High Performance
INT
Grand Prix, Ventura
30643
70643
(1562-1)
(1562-1N)
30989
(2250-1)
EXH
INT
EXH
V-8
428ci/7.0L
4.120" Bore
30691
(2000-1)
INT
30667
70667
(1812-4)
(1812-4N)
30991
70991
(2312-9)
(2312-9N)
30691
70691
(2000-1)
(2000-1N)
30557
(2125-1)
INT
30537
(2125-2)
EXH
Alternate Exh. Valve w 1.770 vl. hd., .250 depth
V-8
429ci/7.0L
4.130" Bore
Cadillac Calais, Commerical (CC),
Deville, Eldorado, Fleetwood, 60 Series,
62 Series, 75 Series
EXH
INT
70658
(1750-2N)
30671
70671
(1812-1)
(1812-1N)
30560
(1937-1)
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
194194
30658
(1750-2)
30649
70649
(1625-4)
(1625-4N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V-8
430ci/7.0L
4.1875" Bore
V-8
454ci/7.4L
4.250" Bore
Buick Electra, LeSabre, Riviera, Wildcat
INT
30537
2.1300
1.875
.250
2.110
1.7550
1.500
.219
1.625
2.1305
1.813
.188
2.065
1.8180
1.563
.219
1.720
2.2555
1.938
.188
1.8180
1.563
.219
1.720
2.3175
2.000
.250
2.190
1.9430
1.688
.219
1.720
2.1305
1.813
.188
2.065
1.8180
1.563
.219
1.720
2.1300
1.875
.219
2.072
1.6920
1.438
.219
1.624
2.1300
1.875
.219
1.960&2.110
1.8180
1.563
.250
1.770
1.7550
1.500
.219
1.660
2.1300
1.875
.219
2.110
1.7550
1.438
.219
1.625&1.687
2.1300
1.875
.250
2.000
1.7550
1.500
.219
1.625
2.1300
1.875
.250
2.000
1.7550
1.500
.219
1.625
1.7570
1.500
.255
1.693
1.3807
1.059
.254
1.295
1.7570
1.323/1.490
.280
1.673
1.5050
1.215/1.275
.280
1.339
(2125-2)
EXH
1970-76 OHV Chevrolet Big block Eng. Chevrolet
INT
Passenger Cars incl: Chevrolet Bel Air,
Biscayne, Brookwood, Caprice, Chevelle,
EXH
Concours, Corvette, Estate Wagon,
Greenbrier, Impala, Kingswood, Laguna,
Malibu, Monte Carlo, Townsman
Aluminum Head Applications, see applications INT
above
30658
70658
(1750-2)
(1750-2N)
31779
(2125-38)
30667
70667
(1812-4)
(1812-4N)
30989
(2250-1)
EXH
70667
(1812-4N)
1970-76 Chevrolet High Performance & Special
High Performance. See applications
above
INT
EXH
INT
LPG, Propane, Natural Gas.
30991
(2312-9)
30936
70936
(1937-17)
(1937-17N)
31779
71779
(2125-38)
(2125-38N)
EXH
70667
(1812-4N)
V-8
455ci/7.5L
4.125" Bore
V-8
455ci/7.5L
4.150" Bore
V-8
455ci/7.5L
4.3125" Bore
V-8
472ci/7.7L
4.300" Bore
30974
(2125-34)
EXH
INT
30664
70664
(1687-2)
(1687-2N)
30974
(2125-34)
EXH
EXH
INT
30671
70671
(1812-1)
(1812-1N)
30658
70658
(1750-2)
(1750-2N)
30974
(2125-34)
EXH
INT
30655
70655
(1750-3)
(1750-3N)
30537
(2125-2)
EXH
INT
30658
70658
(1750-2)
(1750-2N)
30537
(2125-2)
EXH
30658
70658
(1750-2)
(1750-2N)
GENERAL MOTORS TRUCK
(INCLUDES: CHEVROLET, GMC, OLDSMOBILE, PONTIAC)
L4
110ci/1817cc/1.8L
3.307" Bore
1972-75 SOHC Isuzu Eng.
Chevrolet L.U.V. Truck Series 1 - 4
INT
31720
(1750-50)
EXH
31102
(1375-50)
Chevrolet L.U.V. Truck - Series 5 - 9
INT
31467
(1750-51)
EXH
30015
(1500-50)
195
VALVE SEAT
Cadillac Calais, Commercial (CC), Deville,
Eldorado, Fleetwood, 60 Series, 75 Series
INT
V-8
500ci/8.2L
4.300" Bore
1968-76 OHV Olds, Vin W Eng.
Oldsmobile Custom Cruiser, Cutlass,
Delta 88, F-85, Regency, Toronado,
Vista Cruiser, 88, 98, 442
1970-76 OHV Vin Type Y Pontiac Eng. incl.
Hi-output and HD Eng.
Firebird, Grand Am, Grand Prix, Grand
Ville, Le Mans, Safari, T-37, Tempest
1973-76 Alt. Exh. Seat for later models w
1.660 vl. hd., .219 depth
1970-76 OHV Buick Vin Type T Eng.
Buick Centurion, Century, Electra, Estate
Wagon, Gran Sport, LeSabre, Limited,
Regal, Riviera, Wildcat
Cadillac Calais, Commercial (CC), Deville,
Eldorado, Fleetwood, 60 Series, 75 Series
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
GENERAL MOTORS TRUCK (CONT'D)
L4
110ci/1817cc/1.8L
3.307" Bore
Chevrolet L.U.V. Truck Series 10 - 12
INT
31317
1.7570
1.457
.312
1.588
1.5050
1.215/1.275
.280
1.337
1.7570
1.323/1.490
.280
1.588
1.5050
1.215/1.275
.280
1.337
1.6320
1.333
.237
1.600
1.4445
1.095
.237
1.378
1.8195
1.500/1.555
.278
1.732
1.5695
1.265/1.320
.280
1.457
1.6320
1.333
.237
1.600
1.4445
1.095
.237
1.378
1.8180
1.563
.219
1.720
1.6300
1.375
.219
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.250
1.500
1.6920
1.438
.219
1.600
1.4425
1.188
.219
1.307
1.8180
1.563
.219
1.718
1.5050
1.250
.219
1.425
1.8810
1.625
.281
1.5050
1.250
.282
1.8180
1.563
.219
1.718
1.5050
1.250
.219
1.425
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.250
1.500
1.6920
1.438
.219
1.608
1.4425
1.219
.219
1.380
1.6920
1.438
.219
1.600
1.5680
1.312
.219
1.500
(1750-52)
EXH
30015
(1500-50)
L4
118.9ci/1949cc/1.9L
3.425(87mm) Bore
1982-85 SOHC G-200 Vin A Isuzu Eng.
Chevrolet/GMC Trucks , S10 Blazer &
Pick Up, GMC S-15 Jimmy & Pick Up
INT
31467
(1750-62)
EXH
30015
(1500-50)
L4
122ci/1994cc/2.0L
3.504"(89mm) Bore
1983-84 OHV Vin Y Chevrolet Eng.
Chevrolet/GMC Trucks: Blazer/Jimmy,
S-10, S-15
INT
31690
(1625-55)
EXH
31653
(1437-58)
L4
134ci//2.2L
3.504"(89mm) Bore
1990-99 OHV Vin G, 4 Chevrolet Eng.
Chevrolet/GMC Trucks , S10 Pick Up,
GMC S-15 Pick Up, S Series
INT
31285
(1812-55)
EXH
31286
(1562-66)
L4
136.5ci/2238cc/2.2L
3.307"( 88mm) Bore
1981-84 SOHC Isuzu Diesel Eng.
Chevrolet/GMC Trucks: L.U.V., S-10,
S-15
INT
31690
(1625-55)
EXH
31653
(1437-58)
L4
151ci/2.5L
4.000" Bore
1985-93 OHV Pontiac Vin A, E Eng.
Chevrolet/GMC Truck & Van: Astro,
Blazer, Jimmy, S-10, S-15, Sonoma
INT
30667
(1812-4)
EXH
30648
(1625-1)
L4
153ci/2.5L
3.875" Bore
Chevrolet/GMC Truck & Van: 10,1000,
1500 Series
INT
30530
(1812-3)
EXH
30503
(1562-2)
V6
173ci/2835cc/2.8L
3.504" (89mm) Bore
1982-85 OHV Vin B Chevrolet - Carb. Eng.
Chevrolet/GMC Truck & Van: Blazer,
Jimmy, S-10, S-15
1986-93 OHV Vin R Chevrolet - F.I. Eng.
Jimmy, S-10, S-15, Sonoma
VALVE SEAT
1980-89 OHV Chevrolet Eng. w Aluminum Head
Jimmy, S-10, S-15, Sonoma
V6
189ci/3.1L
3.503" (89mm) Bore
L6
194ci/3.2L
3.563" Bore
V6
200ci/3.3L
3.500" Bore
L6
216ci/3.5L
3.500" Bore
1990-95 OHV Vin D Chevrolet Eng.
Chevrolet/GMC, Oldsmobile/Pontiac
Truck & Van: Lumina APV, Oldsmobile
Silhouette, Pontiac Trans Sport
Chevrolet/GMC Truck & Van: El Camino,
10, 20, 1000, 1500, 2500 Series
1978-79 OHV Chevrolet Eng. Chevrolet El Camino,
GMC Caballero
INT
EXH
INT
EXH
INT
71030
(1437-3N)
30667
30711
70711
(1500-1)
(1500-1N)
30683
(1875-4)
EXH
INT
30713
70713
(1500-28)
(1500-28N)
30667
(1812-4)
EXH
INT
30711
70711
(1500-1)
(1500-1N)
30530
(1812-3)
EXH
INT
30503
70503
(1562-2)
(1562-2N)
30664
(1687-2)
INT
31031
71031
(1437-2)
(1437-2N)
30664
(1687-2)
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
196196
31030
(1437-3)
(1812-4)
EXH
1937-53 OHV Chevrolet Eng. Chevrolet/GMC
Truck & Van: 10, 20, 30, 40, 50, 60, 91,
93, 94, 95, 96, 97, 98 Series
30664
(1687-2)
30643
70643
(1562-1)
(1562-1N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L6
228ci/3.7L
3.562" Bore
V-6
229ci/3.8L
3.736" Bore
L6
230ci/3.8L
3.875" Bore
V6
231ci/3.8L
3.800" Bore
L6
235ci/3.9L
3.5625" Bore
1939-59 OHV GMC Truck Eng. Chevrolet/GMC
Truck 100, 150, 250, 280, 300, 350 Series.
Chevrolet El Camino, GMC Caballero
INT
1992-95 OHV Buick Vin L
Chevrolet/GMC/ Oldsmobile/Pontiac
Truck & Van: Lumina APV, Oldsmobile
Silhouette, Pontiac Trans Sport
Chevrolet/GMC Truck & Van: 10, 20,
30, 40, 50, 60, 94, 95, 96, 98 Series
INT
EXH
INT
EXH
INT
EXH
INT
71344
(1562-33N)
1.5669
1.250
.313
30560
1.9440
1.688
.250
1.840
30643
70643
(1562-1)
(1562-1N)
1.5680
1.312
.219
1.500
30530
1.8180
1.500/1.625
.219
1.720
30503
70503
(1562-2)
(1562-2N)
1.5680
1.312/1.390
.250
1.500
30530
1.8180
1.500/1.625
.219
1.710
30541
70541
(1562-9)
(1562-9N)
1.5680
1.312/1.390
.219
1.500
30658
1.7550
1.500
.219
1.710
30541
70541
(1562-9)
(1562-9N)
1.5680
1.312/1.390
.219
1.490
30936
1.9420
1.688
.219
1.875
1.5050
1.250
.219
1.425
2.0060
1.688
.219
1.5680
1.312/1.390
.250
1.500
1.8530
1.498
.273
1.772
1.7220
1.357
.265
1.654
1.8800
1.500
.219
1.7550
1.375
.219
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.250
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.250
1.500
1.9420
1.688
.219
1.875
1.5680
1.312/1.390
.250
1.500
2.1300
1.812
.250
1.940
1.5680
1.312
.219
1.500
2.0060
1.750
.188
1.940
1.5680
1.312
.219
1.500
(1937-17)
EXH
INT
30711
70711
(1500-1)
(1500-1N)
30698
(2000-15)
EXH
INT
INT
30503
70503
(1562-2)
(1562-2N)
31734
71734
(1853E-1)
(1853E-1N)
31709
71709
(1722E-1)
(1722E-1N)
31738
71738
(1875-8)
(1875-8N)
30652
70652
(1750-7)
(1750-7N)
30530
(1812-3)
EXH
INT
30503
70503
(1562-2)
(1562-2N)
30530
70530
(1812-3)
(1812-3N)
70503
(1562-2N)
L6
261ci/4.3L
3.750" Bore
V6
262ci/4.3L
4.000" Bore
INT
Chevrolet/GMC HD Truck & Van:
50, 60 Series
30936
(1937-17)
EXH
1985-97 OHV Chevrolet Vin N, T, W, Z Eng.
Chevrolet/GMC Truck & Van: Astro,
Blazer, Caballero, El Camino, Jimmy,
S-10, S-15, Safari, Sonoma, 10, 20, 30,
1500, 2500, 3500 Series
1991-99 OHV Chevrolet Vin W, X - High
Output Eng. Chevrolet/GMC Truck &
Van: Astro, Blazer, Jimmy, S-10, S-15,
Safari, Sonoma, Syclone, Typhoon
197
INT
30503
70503
(1562-2)
(1562-2N)
30557
(2125-1)
EXH
INT
30643
70643
(1562-1)
(1562-1N)
30690
(2000-36)
EXH
30643
70643
(1562-1)
(1562-1N)
VALVE SEAT
EXH
Chevrolet/GMC LD & HD Truck & Van:
Blazer, El Camino, Jimmy, Sprint, 10,
20, 30, 40, 50, 1000, 1500, 2500, 3500,
4000, 4500, 5000, 5500 Series
31344
(1562-33)
(1750-2)
EXH
L6
250ci/4.1L
3.875" Bore
.250
(1812-3)
EXH
( Replacement universal oversize
for heads w/o O.E.M. insert )
1.438
(1812-3)
INT
1989-91 Cummins Turbo Diesel Eng.
Chevrolet/GMC Truck & Van
(Standard O.E. sizes)
1.6920
(1937-1)
EXH
Chevrolet/GMC Truck & Van: El Camino
10, 20, 30, 40, 50, 1000, 1500, 2500,
3500 Series
Chevrolet/GMC Truck & Van: Caballero,
El Camino
30673
(1687-3)
EXH
30, 40, 50, 60, 94, 95, 96, 98 Series
L4
239ci/3.9L
4.0165" Bore
INT
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V6
262ci/4.3L
4.000" Bore
V8
265ci/4.3L
3.750" Bore
V8
267ci/4.4L
3.500" Bore
L6
270ci/4.4L
3.781" Bore
1991-93 OHV Chevrolet Vin Z - Turbo Eng.
Chevrolet/GMC Truck & Van: Syclone,
Typhoon
10, 20, 30, 40, 50, 60, 70, 80 Series
El Camino
1939-53 OHV GMC Truck Eng. GMC/Chev. Truck
100, 150, 250, 300, 350, 370, 400,
410, 450, 460, 470 Series.
1954-62 OHV GMC Truck Eng. GMC/Chev. Truck
400, 410, 1500, 2500, 3500 Series.
INT
EXH
INT
L6
292ci/4.8L
3.875" Bore
70557
(2125-1N)
30643
70643
(1562-1)
(1562-1N)
30530
2.1300
1.812
.250
1.940
1.5680
1.312
.219
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.250
1.500
1.8180
1.500/1.625
.219
1.720
1.4425
1.219
.219
1.380
1.6920
1.438
.219
1.5680
1.312
.219
1.6920
1.438
.250
1.5680
1.188
.313
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.250
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312
.219
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312
.219
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312
.219
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312
.219
1.500
1.9420
1.688
.219
1.840
1.8180
1.500/1.625
.219
1.720
1.5680
1.312
.219
1.500
1.9420
1.688
.219
1.840
1.5680
1.312
.219
1.500
1.9420
1.688
.219
1.840
1.5680
1.312
.219
1.500
(1812-3)
EXH
INT
30503
70503
(1562-2)
(1562-2N)
30530
(1812-3)
EXH
INT
31031
71031
(1437-2)
(1437-2N)
30664
(1687-2)
EXH
INT
30643
70643
(1562-1)
(1562-1N)
30673
1.500
(1687-3)
EXH
V8
283ci/4.6L
3.875" Bore
30557
(2125-1)
El Camino, 10, 20, 30, 40, 50, 60, 70, 80
1500, 2500, 3500 Series
INT
Blazer, Jimmy, Suburban, 10, 20, 30,
40, 50, 60, 1500, 2500, 3500, 4000,
4500, 5000, 5500, 6000, 6500 Series
INT
30839
70839
(1562-34)
(1562-34N)
30530
(1812-3)
EXH
30503
70503
(1562-2)
(1562-2N)
30530
(1812-3)
EXH
INT
30643
70643
(1562-1)
(1562-1N)
30530
70530
(1812-3)
(1812-3N)
EXH
70643
(1562-1N)
V8
305ci/5.0L
3.736" Bore
1976-80 OHV Chevrolet Vin G, H, U Eng. - Carb.
Caballero, El Camino, Jimmy, Sprint,
Suburban, 10, 20, 30, 1500, 2500, 3500
Series
INT
30530
(1812-3)
EXH
INT
30643
70643
(1562-1)
(1562-1N)
30530
70530
(1812-3)
(1812-3N)
VALVE SEAT
EXH
70643
(1562-1N)
1981-98 OHV Chevrolet Vin 7, F, G, H Eng.
Carb & F.I. Chevrolet/GMC Truck & Van:
Blazer, Caballero, El Camino,
Jimmy, Surburban,
10, 20, 30, 1500, 2500, 3500 Series
INT
INT
30530
(1812-3)
EXH
INT
30936
(1937-17)
30643
70643
(1562-1)
(1562-1N)
30936
70936
(1937-17)
(1937-17N)
EXH
70643
(1562-1N)
1996-00 OHV Chevrolet Vin M Eng.
Carb & F.I. Chevrolet/GMC Truck & Van.
INT
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
198198
30936
(1937-17)
30643
70643
(1562-1)
(1562-1N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V6
305ci/5.0L
4.250" Bore
V8
307ci/5.0L
3.875" Bore
V8
327ci/5.3L
4.000" Bore
V8
348ci/5.7L
4.1250" Bore
1960-74 OHV GMC Vin V Eng. 305A, B, C, D, E.
GMC LD, MD, & HD Truck & Van:
50, 60, 1000, 1500, 2500, 3500, 4000,
4500, 5000, 5500, 6000, 6500 Series
1968-76 OHV Chevrolet/GMC Vin A Eng.
El Camino, Jimmy, Sprint, Suburban 10,
20, 30, 40, 1500, 2500, 3500 Series
1973
OHV Chevrolet/GMC Vin A Eng.
Jimmy, Suburban 10, 20, 25,
1500, 2500 Series
10, 20, 30, 40, 50, 60, 1500, 2500, 3500
Series
MD & HD Truck: 60 Series (2 ton),
70 Series (2 1/2 ton), 80 Series (2 1/2 3 ton), 90 Series (3 1/2 ton)
Chevrolet/GMC LD, MD Truck:
LD: 100 Series MD: 60 Series (2 ton),
70 Series (2 1/2 ton).
V8 - Chev.
350ci/5.7L
4.000" Bore
1969-88 OHV Chevrolet Vin E, L, K, M, P - Carb.
Eng. incl. LPG, Propane, Natural Gas.
Chevrolet/GMC Truck & Van:
Blazer, Caballero, El Camino, Jimmy,
Sprint, Suburban, 10, 20, 30, 40, 50,
60, 1500, 2500, 3500, 4000, 4500, 5000,
5500, 6000, 6500 Series
1989-97 OHV Chevrolet Vin K - F.I.
Eng. incl. LPG, Propane, Natural Gas.
Jimmy, Sierra, Suburban, Tahoe, Yukon,
10, 20, 30, 50, 60, 1500, 2500, 3500,
5000, 5500, 6000, 6500 Series
INT
EXH
INT
EXH
INT
199
2.000
30664
70664
(1687-2)
(1687-2N)
1.6920
1.438
.219
1.565
30530
1.8180
1.500/1.625
.219
1.720
30503
70503
(1562-2)
(1562-2N)
1.5680
1.312/1.390
.250
1.500
30557
2.1300
1.812
.250
1.940
EXH
INT
30503
70503
(1562-2)
(1562-2N)
1.5680
1.312/1.390
.250
1.500
30530
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.250
1.500
2.2555
1.938
.188
2.065
1.8180
1.563
.219
1.720
2.1300
1.812
.250
1.940
1.5680
1.312
.219
1.500
1.8180
1.500/1.625
.219
1.720
2.0050
1.813
.219
1.940
2.1300
1.812
.250
1.940
1.5680
1.312
.219
1.500
1.8180
1.500/1.625
.219
1.720
2.0050
1.813
.219
1.940
2.1300
1.812
.250
1.940
1.5680
1.312
.219
1.500
1.6300
1.313
.250
1.500
2.0060
1.750
.219
1.875
1.6920
1.438
.188
1.622
2.2550
1.875
.281
2.000
1.9520
1.660
.345
1.825
2.3800
2.000
.188
2.263
2.0040
1.718
.345
1.882
(1812-3)
EXH
INT
30503
70503
(1562-2)
(1562-2N)
30989
(2250-1)
EXH
INT
30667
70667
(1812-4)
(1812-4N)
30557
(2125-1)
EXH
INT
INT
INT
EXH
INT
INT
INT
INT
EXH
INT
30643
70643
(1562-1)
(1562-1N)
30530
70530
(1812-3)
(1812-3N)
30952
70952
(2000-7)
(2000-7N)
30557
70557
(2125-1)
(2125-1N)
30643
70643
(1562-1)
(1562-1N)
30530
70530
(1812-3)
(1812-3N)
30952
70952
(2000-7)
(2000-7N)
30557
70557
(2125-1)
(2125-1N)
30643
70643
(1562-1)
(1562-1N)
30650
70650
(1625-3)
(1625-3N)
30691
70691
(2000-1)
(2000-1N)
30873
70873
(1687-16)
(1687-16N)
31252
(2250-2)
EXH
INT
31751
71751
(1952E-1)
(1952E-1N)
31791
(2375-1)
EXH
31760
71670
(2004E-1)
(2004E-1N)
VALVE SEAT
V6
351ci/5.8L
4.563" Bore
.250
(2125-1)
EXH
1978-84 OHV Oldsmobile Vin N, Z Diesel Eng.
El Camino, 10, 20, 30, 1500, 2500, 3500
Series
1960-72 OHV Chevrolet/GMC Eng incl. Vin C.
Chevrolet/GMC Truck & Van: 1000,
1500, 2500, 3500, 4000, 5000, 5500,
6000, 6500, 7000, 7500, 8000, 8500 Series
1966-69 OHV Chevrolet/GMC Vin E, M Eng.
1500, 2500, 3500, 4000, 5500, 6000,
6500, 7000, 7500, 8000, 8500 Series
1.813/1.875
V8 - Olds.
350ci/5.7L
4.057" Bore
2.0675
(1812-3)
EXH
Exh. valve seat for Vortex Heads
30964
(2062-1)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8
366ci/6.0L
3.937" Bore
1966-85 OHV Chevrolet/GMC Vin Type E Gas
Eng. Chevrolet/GMC Truck & Van:
40, 50, 60, 65, 70, 80, 5000, 5500,
6000, 6500, 7000, 7500, 8000, 8500 Series
Alt. Int. w oversized replacement for
late model heads w factory installed seat
Alt. Exh. w oversized replacement for
INT
30936
1.9430
1.688
.219
1.840
1.7550
1.500
.219
1.660
2.1305
1.750
.219
1.940
1.8180
1.468
.313
1.660
1.9430
1.688
.219
1.840
1.7550
1.500
.219
1.660
2.1305
1.750
.219
1.940
1.7550
1.500
.219
1.660
1.8180
1.468
.313
1.660
2.1305
1.750
.219
1.940
1.7550
1.500
.219
1.660
2.2550
1.875
.281
2.000
2.0040
1.718
.345
1.882
2.0055
1.750
.156
1.968
1.6920
1.438
.156
1.653
1.9430
1.688
.188
1.811
1.5680
1.313
.188
1.535
1.9430
1.688
.188
1.811
1.5680
1.313
.188
1.535
1.9430
1.688
.188
1.811
1.5680
1.313
.188
1.535
2.2555
1.938
.188
2.065
1.8180
1.563
.219
1.720
1.8180
1.500/1.625
.219
1.720
2.1300
1.812
.250
1.940
1.5680
1.312
.219
1.500
(1937-17)
EXH
INT
30658
70658
(1750-2)
(1750-2N)
31777
(2125-11)
EXH
INT
30680
70680
(1812-21)
(1812-21N)
30936
70936
(1937-17)
(1937-17N)
EXH
70658
(1750-2N)
1985-95 OHV Chevrolet/GMC Vin Type L Gas
50, 60, 65, 70, 80, 5000, 5500, 6000,
6500, 7000, 7500, 8000, 8500 Series
Alt. Exh. w oversized replacement for
INT
31777
(2125-11)
EXH
EXH
INT
30658
70658
(1750-2)
(1750-2N)
30680
70680
(1812-21)
(1812-21N)
31777
71777
(2125-11)
(2125-11N)
EXH
70658
(1750-2N)
V6
379ci/6.2L
4.563" Bore
V8
381ci/6211cc/6.2L
3.976 (101mm) Bore
1973-75 OHV GMC HD Eng.
GMC Truck & Van: 60, 5500, 6000,
6500 Series
1982-85 Chevrolet Truck Vin C, J Diesel
Sierra, Suburban, Yukon, 10, 20,
30, 1500, 2500, 3500 Series
1982-94 Chevrolet Truck Vin C, J Diesel Eng.
Late Model Diesel applications,
see above.
INT
31252
(2250-2)
EXH
INT
31760
71760
(2004E-1)
(2004E-1N)
31763
71763
(2000-22)
(2000-22N)
EXH
70872
(1687-15N)
INT
30935
70935
(1937-23)
(1937-23N)
EXH
70840
(1562-36N)
VALVE SEAT
V8
395ci/6.5L
4.060"(103mm) Bore
V8
396ci/6.5L
4.0938" Bore
V8 - Chev. Sm. Blk
400ci/6.6L
4.125" Bore
1991-00 Chevrolet/GMC Truck Vin P, Y
Diesel Eng. Chevrolet/GMC Truck &
Van: Blazer, Jimmy, Sierra, Suburban,
Tahoe, Yukon, 10, 20, 30, 1500, 2500,
3500 Series
1992-99 Chevrolet/GMC Truck Vin F, S,
Turbo Diesel Eng. Blazer, Jimmy,
Sierra, Suburban, Tahoe, Yukon, 10,
20, 30, 1500, 2500, 3500 Series
1966-70 OHV Chevrolet Big Block Eng.
Chevrolet/GMC Truck: El Camino, 10,
20, 30, 1500, 2500, 3500 Series
1970-80 OHV Chevrolet Small Bock Eng.
El Camino, Jimmy, Sprint, Suburban,
10, 20, 30, 1500, 2500, 3500 Series
INT
70935
(1937-23N)
EXH
70840
(1562-36N)
INT
30935
70935
(1937-23)
(1937-23N)
EXH
70840
(1562-36N)
INT
30989
(2250-1)
EXH
INT
30667
70667
(1812-4)
(1812-4N)
30530
(1812-3)
INT
30557
(2125-1)
EXH
NOTE:
NOTE:
SeeSee
progressive
progressive
listing
listing
for additional
for additional
30000/70000
30000/70000
sizes
sizes
not listed
not listed
by application.
by application.
200200
30935
(1937-23)
30643
70643
(1562-1)
(1562-1N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8 - Chev. Sm. Blk
400ci/6.6L
4.125" Bore
INT
INT
30530
70530
(1812-3)
(1812-3N)
30557
70557
(2125-1)
(2125-1N)
EXH
70643
1.8180
1.500/1.625
.219
1.720
2.1300
1.812
.250
1.940
1.5680
1.312
.219
1.500
2.2555
1.938
.188
2.065
1.8180
1.563
.219
1.720
2.2550
1.875
.281
2.160
1.9520
1.660
.345
1.825
2.3800
2.000
.188
2.263
2.0040
1.718
.345
1.882
2.2555
1.938
.188
2.065
1.8180
1.563
.219
1.720
2.2555
1.938
.188
2.065
1.8180
1.563
.219
1.720
1.9430
1.688
.219
1.840
2.0680
1.812
.250
1.940
1.7550
1.500
.219
1.660
1.9430
1.688
.219
1.840
1.7550
1.500
.219
1.660
1.9430
1.688
.219
1.840
2.0680
1.812
.250
1.940
1.7550
1.500
.219
1.660
2.3800
2.000
.188
2.263
2.0040
1.718
.345
1.882
2.1305
1.813
.188
2.065
1.7863
1.406
.288
1.720
1.8180
1.563
.219
1.720
1.8180
1.500
.312
1.720
2.1305
1.813
.188
2.065
1.8180
1.563
.219
1.720
(1562-1N)
V8 - Chev Big Blk
400ci/6.6L
4.125" Bore
V6
401ci/6.6L
4.875" Bore
V8
402ci/6.6L
4.125" Bore
V8
409ci/6.7L
4.3125" Bore
V8
427ci/7.0L
4.250" Bore
Sprint, 10, 20, 30, 1500, 2500, 3500
Series
1960-65 OHV MD GMC Truck Eng.
5500, 6000 Series
1966-73 OHV Type M, MD & HD GMC Truck Eng.
6000, 6500, 7000, 7500, 8000, 8500
Series
Chevrolet/GMC Truck: El Camino, Sprint,
10, 20, 30, 1500, 2500, 3500 Series
MD & HD Truck: 80 Series (2 1/2-3 ton),
90 Series (3 1/2 ton), 100 Series
1968-95 OHV Chevrolet MD & HD Truck Eng.
60, 65, 5000, 5500, 6000, 6500,
INT
EXH
INT
EXH
INT
70667
(1812-4N)
31252
31751
71751
(1952E-1)
(1952E-1N)
31791
(2375-1)
EXH
INT
31760
71670
(2004E-1)
(2004E-1N)
30989
(2250-1)
EXH
INT
30667
70667
(1812-4)
(1812-4N)
30989
(2250-1)
EXH
INT
INT
INT
EXH
INT
30667
(1812-4)
(2250-2)
EXH
70, 80, 7000, 7500, 8000, 8500 Series
30989
(2250-1)
INT
30667
70667
(1812-4)
(1812-4N)
30936
70936
(1937-17)
(1937-17N)
30963
70963
(2062-3)
(2062-3N)
30658
70658
(1750-2)
(1750-2N)
30936
70936
(1937-17)
(1937-17N)
30658
70658
(1750-2)
(1750-2N)
30936
70936
(1937-17)
(1937-17N)
30963
70963
(2062-3)
(2062-3N)
EXH
70658
(1750-2N)
1971-00 OHV Chevrolet Vin B, J, N, W Truck Eng.
- Carb. & F.I. Chevrolet/GMC Truck &
Van: Blazer, El Camino, Jimmy, Motor
Home, Sierra, Sprint, Suburban, Yukon,
10, 20, 30, 35, 1500, 2500, 3500 Series
Alt. oversized Exh. seat for late model
heads w Factory Installed Exh. Seat
INT
EXH
INT
EXH
EXH
EXH
INT
EXH
31791
71791
(2375-1)
(2375-1N)
31760
71670
(2004E-1)
(2004E-1N)
31779
71779
(2125-38)
(2125-38N)
31087
71087
(1784E-1)
(1784E-1N)
30667
70667
(1812-4)
(1812-4N)
30907
70907
(1812-9)
(1812-9N)
31779
71779
(2125-38)
(2125-38)
70667
(1812-4N)
201
VALVE SEAT
V8
454ci/7.4L
4.250" Bore
1973-74 OHV Type M, MD, & HD Truck Eng.
Chevrolet/GMC Truck: 80, 5500, 6000,
6500, 7000, 7500, 8000, 8500 Series
V6
432ci/7.1L
4.875" Bore
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8
454ci/7.4L
4.250" Bore
INT
70 Series
30691
70691
(2000-1)
(2000-1N)
EXH
70672
2.0060
1.750
.219
1.840
1.8180
1.500
.250
1.660
2.0060
1.750
.219
1.840
1.7863
1.406
.288
1.720
2.2560
1.875
.281
2.160
1.9520
1.660
.345
1.825
2.3800
2.000
.188
2.263
2.0040
1.718
.345
1.882
2.3800
2.000
.188
2.263
1.9520
1.660
.345
1.825
2.2560
1.875
.281
2.160
1.9520
1.660
.345
1.825
2.2560
1.875
.281
2.160
1.9520
1.660
.345
1.825
1.8800
1.562
.250
1.8800
1.562
.250
1.8504
1.437
.394
1.6300
1.188
.375
2.0060
1.688
.282
1.942
1.7550
1.438
.250
1.565
1.9690
1.535
.413
1.9690
1.535
.413
2.0680
1.688
.281
1.942
1.7550
1.438
.250
1.565
1.9690
1.535
.413
1.7720
1.358
.394
(1812-5N)
INT
1982-93 OHV Chevrolet MD Mark IV & V
Truck Eng. Chevrolet/GMC Truck &
Van: 50, 60, 70 Series
V6
478ci/7.8L
5.125" Bore
V8
637ci/10.4L
5.125" Bore
V12
702ci/11.6L
4.5625" Bore
EXH
INT
1962-65 OHV GMC MD & HD Truck Gas Eng.
Chevrolet/GM Truck: 60, 80, 4000,
5000, 45500, 6000, 6500 Series
EXH
1966-75 OHV GMC MD & HD Truck Type M Gas
Eng. Chevrolet/GMC Truck: 50, 60, 70,
80, 4000, 5000, 5500, 6000, 6500, 7000,
7500, 8500 Series
1961-74 OHV GMC MD & HD Truck DH478 Series
Diesel Eng. GMC Truck: 50, 60, 70, 80,
4000, 5000, 5500, 6000, 6500, 7000, 7500,
8500 Series
INT
1966-73 GMC HD Truck Gas Eng.
GMC HD Truck DH 637 Series Diesel
Eng. GMC Truck: 8500, 9500 Series
INT
EXH
INT
EXH
EXH
INT
1960-65 GMC HD Truck Eng.
GMC Truck: 7000, 7500, 9000 Series
EXH
30691
70691
(2000-1)
(2000-1N)
31087
71087
(1784E-1)
(1784E-1N)
31252
71252
(2250-2)
(2250-2N)
31751
71751
(1952E-1)
(1952E-1N)
31791
71791
(2375-1)
(2375-1N)
31760
71670
(2004E-1)
(2004E-1N)
31791
71791
(2375-1)
(2375-1N)
31751
71751
(1952E-1)
(1952E-1N)
31252
71252
(2250-2)
(2250-2N)
31751
71751
(1952E-1)
(1952E-1N)
31252
71252
(2250-2)
(2250-2N)
31751
71751
(1952E-1)
(1952E-1N)
GEO - SEE GENERAL MOTORS PASSENGER CAR
HARLEY DAVIDSON MOTORCYCLE
2 Cyl
INT
1936-47 Knucklehead - O.E. Replacement
oversize repair seat insert
EXH
2 Cyl
55ci/883cc
INT
1986-94 Evolution XL V2 - Alt. oversize
repair seat insert
VALVE SEAT
INT
1957-85 Sportster Ironhead - Std. O.E. size
repair seat insert
INT
1948-65 Panhead - O.E. Replacement
1957-85 1000 XL Sportser Ironhead - Std. O.E.
size repair seat insert
INT
31683
71683
(1625-8)
(1625-8N)
30700
30656
70656
(1750-4)
(1750-4N)
31753
INT
Evolution XL V2 - O.E. Replacement
31753
71753
(1969E-2)
(1969E-2N)
31768
(2062-8)
EXH
1986
only
31228
(1969E-2)
EXH
2 Cyl
67ci/1100cc
70509
(1875-2N)
(2006E-1)
EXH
2 Cyl
61ci/1000cc
30509
(1875-2)
(1850E-2)
EXH
2 Cyl
55ci/900cc
30509
(1875-2)
30656
70656
(1750-4)
(1750-4N)
31753
(1969E-2)
EXH
202
31227
71227
(1772E-2)
(1772E-2N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
HARLEY DAVIDSON MOTORCYCLE (CONT'D)
2 Cyl
67ci/1100cc
1987-97 Evolution XL V2 - O.E. Replacement
INT
EXH
2 Cyl
74ci/1200cc
1987-97 Evolution XL V2 - O.E. Replacement
INT
INT
1.437
.394
31683
71683
(1625-8)
(1625-8N)
1.6300
1.188
.375
31228
1.8504
1.437
.394
31683
71683
(1625-8)
(1625-8N)
1.6300
1.188
.375
31753
1.9690
1.535
.413
1.9690
1.535
.413
2.1654
1.732
.433
1.9690
1.535
.413
1.9690
1.535
.413
1.7720
1.358
.394
2.1654
1.732
.433
1.9690
1.535
.413
1.5050
1.250
.219
1.3800
1.125
.188
1.5050
1.125
.219
1.3800
1.125
.188
1.1300
0.875
.219
1.3800
1.125
.188
1.1300
0.875
.219
1.3800
1.125
.188
1.1300
0.875
.219
1.5050
1.250
.219
1.3800
1.125
.188
1.5050
1.125
.219
(1969E-2)
EXH
INT
1966-84 Shovelhead - O.E. Replacement
31753
71753
(1969E-2)
(1969E-2N)
31783
(2165E-1)
EXH
2 Cyl
80ci/1340cc
1.8504
(1850E-2)
EXH
1948-65 Panhead - O.E. Replacement
31228
(1850E-2)
1984-97 Evolution Big Twin V2 - O.E.
Replacement oversize repair seat insert
INT
71753
(1969E-2N)
31753
(1969E-2)
EXH
INT
1966-84 Shovelhead - O.E. Replacement
31753
(1969E-2)
31227
71227
(1772E-2)
(1772E-2N)
31783
(2165E-1)
EXH
31753
71753
(1969E-2)
(1969E-2N)
HENRY J - SEE AMERICAN MOTORS/JEEP
HERCULES
2 Cyl
57ci/1.0L
3.000" Bore
INT
1939-60 NXA
EXH
EXH
(Alternate oversize exh. Seat)
L4
59ci/1.0L
2.500" Bore
L4
2.500" Bore
INT
1934-68 ZXA, ZXA3
EXH
INT
BX
EXH
EXH
INT
1939-60 NXB
EXH
EXH
203
30790
70790
(1375-4)
(1375-4N)
30707
70707
(1500-8)
(1500-8N)
30790
70790
(1375-4)
(1375-4N)
30754
70754
(1125-1)
(1125-1N)
30790
70790
(1375-4)
(1375-4N)
30754
70754
(1125-1)
(1125-1N)
30790
70790
(1375-4)
(1375-4N)
30754
70754
(1125-1)
(1125-1N)
30711
70711
(1500-1)
(1500-1N)
30790
70790
(1375-4)
(1375-4N)
30707
70707
(1500-8)
(1500-8N)
VALVE SEAT
2 Cyl
66ci/1.1L
3.250" Bore
INT
1934-68 ZXB, ZXB3
70711
(1500-1N)
L4
65ci/1.0L
2.625" Bore
30711
(1500-1)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
HERCULES (CONT'D)
L4
79ci/1.3L
2.500" Bore
INT
1931-68 IX, IXC
EXH
EXH
L4
95ci/1.6L
2.750" Bore
INT
1931-68 IXF-3
EXH
EXH
L4
2.875" Bore
INT
1935-58 BXB
EXH
L4
113ci/1.9L
3.000" Bore
INT
1931-68 IXA, IXA3, IXA5, IXAC
EXH
EXH
L4
123ci/2.0L
3.125" Bore
INT
1931-68 IXK, IXK3
EXH
EXH
L3
130ci/2.1L
3.500" Bore
L4
133ci/2.2L
3.250" Bore
INT
1956-63 DD130, GO130
Gas & Diesel Eng.
EXH
INT
1931-68 IXB, IXB3, IXB5, IXBC, IXBL, IXB-ER
Military Std.
EXH
EXH
INT
DIX4B Diesel Eng.
VALVE SEAT
EXH
L4
141ci/2.3L
3.250" Bore
INT
1931-68 IX Series
EXH
EXH
L3
149ci/2.4L
3.750" Bore
L4
164ci/2.7L
3.400" Bore
INT
1956-73 DD149, GO149, GO149H, D1500,
G1500 Gas & Diesel Eng.
EXH
INT
G1600, JX4E, JX4E2, JX4E3, JX4E5
EXH
204
30711
70711
(1500-1)
(1500-1N)
30790
70790
(1375-4)
(1375-4N)
30707
70707
(1500-8)
(1500-8N)
30711
70711
(1500-1)
(1500-1N)
30790
70790
(1375-4)
(1375-4N)
30707
70707
(1500-8)
(1500-8N)
30790
70790
(1375-4)
(1375-4N)
30754
70754
(1125-1)
(1125-1N)
30711
70711
(1500-1)
(1500-1N)
30790
70790
(1375-4)
(1375-4N)
30707
70707
(1500-8)
(1500-8N)
30711
70711
(1500-1)
(1500-1N)
30790
70790
(1375-4)
(1375-4N)
30707
70707
(1500-8)
(1500-8N)
30904
70904
(1812-7)
(1812-7N)
30661
70661
(1625-9)
(1625-9N)
30711
70711
(1500-1)
(1500-1N)
30790
70790
(1375-4)
(1375-4N)
30707
70707
(1500-8)
(1500-8N)
30648
70648
(1625-1)
(1625-1N)
30790
70790
(1375-4)
(1375-4N)
30711
70711
(1500-1)
(1500-1N)
30790
70790
(1375-4)
(1375-4N)
30707
70707
(1500-8)
(1500-8N)
30904
70904
(1812-7)
(1812-7N)
30661
70661
(1625-9)
(1625-9N)
30659
70659
(1750-1)
(1750-1N)
30648
70648
(1625-1)
(1625-1N)
1.5050
1.250
.219
1.3800
1.125
.188
1.5050
1.125
.219
1.5050
1.250
.219
1.3800
1.125
.188
1.5050
1.125
.219
1.3800
1.125
.188
1.1300
0.875
.219
1.5050
1.250
.219
1.3800
1.125
.188
1.5050
1.125
.219
1.5050
1.250
.219
1.3800
1.125
.188
1.5050
1.125
.219
1.8180
1.438
.250
1.6300
1.250
.219
1.5050
1.250
.219
1.3800
1.125
.188
1.5050
1.125
.219
1.6300
1.375
.219
1.3800
1.125
.188
1.5050
1.250
.219
1.3800
1.125
.188
1.5050
1.125
.219
1.8180
1.438
.250
1.6300
1.250
.219
1.7550
1.500
.250
1.6300
1.375
.219
DIA.
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
HERCULES (CONT'D)
L4
166ci/2.7L
3.625" Bore
L3
169ci/2.8L
4.000" Bore
L4
173ci/2.8L
3.500" Bore
L4
188ci/3.1L
3.750" Bore
L6
191ci/3.1L
3.125" Bore
L4
199ci/3.3L
3.750" Bore
L4
205ci/3.4L
3.250" Bore
L4
214ci/3.5L
4.000" Bore
L6
222ci/3.6L
3.375" Bore
L4
226ci/3.7L
4.000" Bore
INT
1956-73 D1700, G1700, DD169, GO169,
GO169H Gas & Diesel Eng.
EXH
INT
1956-73 DD173, GO173
Gas & Diesel Eng.
EXH
INT
1951-71 JX4C, JX4C2, JX4C3, JX4C5
EXH
INT
1936-60 QXA, QXA3, QXA5
EXH
1956-73 DOOB, DD198, D2000, D2120, D3000,
D3400, GO198, G2000, G2120, G3000,
G3400 Gas & Diesel Eng.
EXH
INT
1936-60 QXB, QXB3, QXB5
EXH
1956-73 JX4, JX4D, JX4D2, JX4D3, JX4D5,
JXDM, JXDT, JX4L-D3, JXTR
INT
EXH
1939-60 QXC, QXC3, QXC5, QXC5M, QXC5MC
INT
EXH
1956-73 DOOC, DD226, D2300, GO226, G2300
Gas & Diesel Eng.
INT
EXH
INT
1931-71 JXA, JXAM
EXH
INT
1939-69 QXD, QXD3, QXD5
EXH
INT
(Alternate oversize int. Seat)
L6
232ci/3.8L
3.406" Bore
INT
INT
JX Series
EXH
205
70509
(1875-2N)
31157
71157
(1375-5)
(1375-5N)
30904
70904
(1812-7)
(1812-7N)
30661
70661
(1625-9)
(1625-9N)
30904
70904
(1812-7)
(1812-7N)
30661
70661
(1625-9)
(1625-9N)
30659
70659
(1750-1)
(1750-1N)
30648
70648
(1625-1)
(1625-1N)
30711
70711
(1500-1)
(1500-1N)
30711
70711
(1500-1)
(1500-1N)
30904
70904
(1812-7)
(1812-7N)
30661
70661
(1625-9)
(1625-9N)
30711
70711
(1500-1)
(1500-1N)
30711
70711
(1500-1)
(1500-1N)
30659
70659
(1750-1)
(1750-1N)
30648
70648
(1625-1)
(1625-1N)
30656
70656
(1750-4)
(1750-4N)
30711
70711
(1500-1)
(1500-1N)
30904
70904
(1812-7)
(1812-7N)
30661
70661
(1625-9)
(1625-9N)
30659
70659
(1750-1)
(1750-1N)
30648
70648
(1625-1)
(1625-1N)
30656
70656
(1750-4)
(1750-4N)
30711
70711
(1500-1)
(1500-1N)
30672
70672
(1812-5)
(1812-5N)
30659
70659
(1750-1)
(1750-1N)
30648
70648
(1625-1)
(1625-1N)
1.8800
1.562
.250
1.3800
1.125
.266
1.8180
1.438
.250
1.6300
1.250
.219
1.8180
1.438
.250
1.6300
1.250
.219
1.7550
1.500
.250
1.6300
1.375
.219
1.5050
1.250
.219
1.5050
1.250
.219
1.8180
1.438
.250
1.6300
1.250
.219
1.5050
1.250
.219
1.5050
1.250
.219
1.7550
1.500
.250
1.6300
1.375
.219
1.7550
1.438
.250
1.5050
1.250
.219
1.8180
1.438
.250
1.6300
1.250
.219
1.7550
1.500
.250
1.6300
1.375
.219
1.7550
1.438
.250
1.5050
1.250
.219
1.8180
1.500
.250
1.7550
1.500
.250
1.6300
1.375
.219
VALVE SEAT
L6
230ci/3.8L
3.438" Bore
EXH
30509
(1875-2)
L6
228ci/3.7L
3.375" Bore
INT
1946-58 DIX4D
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
HERCULES (CONT'D)
L6
237ci/3.9L
3.438" Bore
INT
1939-69 L237, QXL, QXLD, QXLD-ER, QXLD3,
QXLD5
EXH
INT
(Alternate oversize int. Seat)
L6
245ci/4.0L
3.500" Bore
L6
249ci/4.1L
3.625" Bore
L6
260ci/4.3L
3.500" Bore
INT
JXE, JXE4
EXH
INT
DIX-6-D
EXH
INT
DD260, G0260
EXH
INT
DJX, DJXB, DJXBC, DJXBL
EXH
L6
263ci/4.3L
3.625" Bore
L6
272ci/4.5L
3.6875" Bore
L6
282ci/4.6L
3.750" Bore
L6
298ci/4.9L
3.750" Bore
INT
JXB, JXBM
EXH
INT
DIX-6-272
EXH
INT
JXC, JXCM, JXCT Series
EXH
INT
DD298, DJXC, G298, G298H, G0298,
D3000, DH3000, G3000
EXH
INT
DJXH, DJXHF
VALVE SEAT
EXH
L6
320ci/5.2L
4.000" Bore
1931-56 JXD, JXDF, JXDM, JXDT, JX4D, JXTR
(early)
INT
EXH
EXH
(Alt. Oversize Exh. w .250 depth)
INT
1956-73 JXD, JXDT, JXTR (late)
EXH
L6
339ci/5.6L
4.000" Bore
INT
1956-73 DD339, DJXD,G339, G339H, G0339
D3400, G3400
EXH
206
30656
70656
(1750-4)
(1750-4N)
30711
70711
(1500-1)
(1500-1N)
30672
70672
(1812-5)
(1812-5N)
30659
70659
(1750-1)
(1750-1N)
30648
70648
(1625-1)
(1625-1N)
30509
70509
(1875-2)
(1875-2N)
31157
71157
(1375-5)
(1375-5N)
30904
70904
(1812-7)
(1812-7N)
30661
70661
(1625-9)
(1625-9N)
30725
70725
(2000-6)
(2000-6N)
31157
71157
(1375-5)
(1375-5N)
30659
70659
(1750-1)
(1750-1N)
30648
70648
(1625-1)
(1625-1N)
30509
70509
(1875-2)
(1875-2N)
31157
71157
(1375-5)
(1375-5N)
30659
70659
(1750-1)
(1750-1N)
30648
70648
(1625-1)
(1625-1N)
30904
70904
(1812-7)
(1812-7N)
30661
70661
(1625-9)
(1625-9N)
31774
71774
(2125-10)
(2125-10N)
30643
70643
(1562-1)
(1562-1N)
30659
70659
(1750-1)
(1750-1N)
30648
70648
(1625-1)
(1625-1N)
30656
70656
(1750-4)
(1750-4N)
30659
70659
(1750-1)
(1750-1N)
30646
70646
(1625-2)
(1625-2N)
30904
70904
(1812-7)
(1812-7N)
30661
70661
(1625-9)
(1625-9N)
1.7550
1.438
.250
1.5050
1.250
.219
1.8180
1.500
.250
1.7550
1.500
.250
1.6300
1.375
.219
1.8800
1.562
.250
1.3800
1.125
.266
1.8180
1.438
.250
1.6300
1.250
.219
2.0060
1.625
.281
1.3800
1.125
.266
1.7550
1.500
.250
1.6300
1.375
.219
1.8800
1.562
.250
1.3800
1.125
.266
1.7550
1.500
.250
1.6300
1.375
.219
1.8180
1.438
.250
1.6300
1.250
.219
2.1305
1.750
.281
1.5680
1.312
.219
1.7550
1.500
.250
1.6300
1.375
.219
1.7550
1.438
.250
1.7550
1.500
.250
1.6300
1.375
.250
1.8180
1.438
.250
1.6300
1.250
.219
DIA.
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
HERCULES (CONT'D)
L6
339ci/5.6L
4.000" Bore
L6
358ci/5.9L
4.000" Bore
INT
1946-69 JXL,JXLD
EXH
INT
1930-58 WXC, WXC2, WXC3, WXG
EXH
INT
1940-50 WXLC
EXH
L4
4.000" Bore
INT
1970-73 G1400, G1800
EXH
L6
383ci/6.3L
4.250" Bore
L6
404ci/6.6L
4.250" Bore
L4
INT
1940-50 WXLC2
EXH
INT
1930-58 WXC3, WXLD
EXH
OOA 3.500" Bore, OOB 3.750" Bore
OOC 4.000" Bore. (Late Model intake
and exhaust seat)
(Early Model intake seat w .312 depth)
(Early Model exhaust seat w .312 depth)
L4
1936-60 DIXB 3.750" Bore, DIXC 4.000" Bore,
DIXD 4.250" Bore
INT
EXH
INT
EXH
INT
EXH
L4
1936-60 DOOB 3.750" Bore, DOOC 4.000" Bore,
DOOD, 4.500" Bore
INT
EXH
L4
1970-73 G1400, G1600, G1800, 4.000" Bore
INT
1946-60 DWXC 4.000" Bore, DWXD, DWXLD,
DWXID 4.250" Bore
INT
EXH
L6
1936-60 DRXB 4.375" Bore, DRX501 4.500" Bore
DRXC 4.625" Bore
INT
EXH
207
30907
70907
(1812-9)
(1812-9N)
31749
71749
(1937-5)
(1937-5N)
30681
70681
(1875-6)
(1875-6N)
30984
70984
(2187-4)
(2187-4N)
30725
70725
(2000-6)
(2000-6N)
30923
70923
(1875-11)
(1875-11N)
30676
70676
(1687-11)
(1687-11N)
30984
70984
(2187-4)
(2187-4N)
30725
70725
(2000-6)
(2000-6N)
31749
71749
(1937-5)
(1937-5N)
30681
70681
(1875-6)
(1875-6N)
30659
70659
(1750-1)
(1750-1N)
30646
70646
(1625-2)
(1625-2N)
30907
70907
(1812-9)
(1812-9N)
30653
70653
(1750-8)
(1750-8N)
30725
70725
(2000-6)
(2000-6N)
31157
71157
(1375-5)
(1375-5N)
30725
70725
(2000-6)
(2000-6N)
30790
70790
(1375-4)
(1375-4N)
30923
70923
(1875-11)
(1875-11N)
30676
70676
(1687-11)
(1687-11N)
31768
71768
(2062-8)
(2062-8N)
30711
70711
(1500-1)
(1500-1N)
31790
71790
(2312-4)
(2312-4N)
30648
70648
(1625-1)
(1625-1N)
1.9430
1.625
.281
1.8180
1.500
.312
1.9430
1.625
.281
1.8810
1.625
.219
2.1935
1.875
.281
2.0060
1.625
.281
1.8800
1.562
.312
1.6920
1.312
.313
2.1935
1.875
.281
2.0060
1.625
.281
1.9430
1.625
.281
1.8810
1.625
.219
1.7550
1.500
.250
1.6300
1.375
.250
1.8180
1.500
.312
1.7550
1.375
.250
2.0060
1.625
.281
1.3800
1.125
.266
2.0060
1.625
.281
1.3800
1.125
.188
1.8800
1.562
.312
1.6920
1.312
.313
2.0680
1.688
.281
1.5050
1.250
.219
2.3180
2.000
.281
1.6300
1.375
.219
VALVE SEAT
L6
71749
(1937-5N)
EXH
31749
(1937-5)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
HONDA (ALSO SEE ACURA)
L4
1169cc/1.2L
2.756"(70mm) Bore
INT
1972-73 SOHC EB1 Eng.
Civic 1200
31660
1.4445
1.150
.410
1.333
1.3820
1.000
.410
1.178
1.4445
1.150
.410
1.333
1.3820
1.000
.410
1.178
1.5700
1.243
.354
1.417
1.4445
1.090
.354
1.260
1.5050
1.140/1.250
.325
1.380
1.2570
0.910
.285
1.102
1.2570
0.910
.285
1.181
1.2570
0.910
.285
1.142
1.2570
0.910
.285
1.181
1.2570
0.910
.285
1.142
1.5050
1.140/1.250
.325 1.333&1.378
1.2570
0.910
.285 1.102&1.178
1.5050
1.140/1.250
.325
1.333
1.2570
0.910
.285
1.102
1.1320
0.900
.325
1.063
1.3820
1.120
.325
1.260
1.2570
0.910
.285
1.181
1.2570
0.910
.285
1.142
1.1320
0.900
.325
1.063
1.3820
1.120
.325
1.299
1.1940
0.934
.260
1.142
1.0690
0.790
.260
.984
1.1940
0.934
.260
1.142
1.0690
0.790
.260
.984
1.2570
1.000
.305
1.181
1.0695
0.870
.195
1.024
(1437-52)
EXH
31063
(1375-52)
L4
1237cc/1.2L
2.835" (72mm) Bore
INT
Civic 1200
31660
(1437-52)
EXH
31063
(1375-52)
INT
Civic 1200
31318
(1562-51)
EXH
31652
(1437-53)
L4
1335cc/1.3L
2.91" (74mm) Bore
INT
1980-83 SOHC EJ1 Eng.
Civic 1300
30105
(1500-65)
EXH
31054
(1250-52)
L4
1342cc/1.3L
2.91" (74mm) Bore
INT
1984-86 SOHC EV1 Eng.
Civic, Civic CRX, CRX HF (High Fuel)
31054
(1250-52)
EXH
31054
(1250-52)
1987
INT
SOHC D13A2 Eng
Civic
31054
(1250-52)
EXH
31054
(1250-52)
L4
1488cc/1.5L
2.91" (74mm) Bore
INT
1975-79 SOHC ED1, ED2, ED3, ED4 Eng.
Civic, Civic 1500, CVCC
30105
(1500-65)
EXH
31054
(1250-52)
INT
1980-83 SOHC EM1 Eng.
Civic CVCC
30105
(1500-65)
EXH
31054
(1250-52)
INT
1984-86 SOHC 12 valve EW1 Eng.
Civic CVCC, CRX 1500
31605
(1125-54)
EXH
31635
(1375-55)
1985-87 SOHC 8 valve D15A2, EW1 (High Fuel)
Eng. Civic, CRX HF (High Fuel),
CRX 1500 HF (High Fuel)
INT
31054
(1250-52)
EXH
31054
VALVE SEAT
(1250-52)
INT
1985-87 SOHC 12 valve D15A2, D15A3, EW 3,
EW 4 Eng. Civic, Civic Si, CRX,
CRX 1500, CRX Si
31605
(1125-54)
EXH
31635
(1375-55)
L4
1493cc/1.5L
2.95" (75mm) Bore
L4
1590cc/1.6L
2.953" (75mm) Bore
1988-95 SOHC 16 valve D15B, D152B2, D15B6
D15B7, D15Z1 Eng. Civic, Civic CX,
CRX, CRX HF (High Fuel), DX, LX, VX,
Del Sol
1988-91 SOHC 16 valve D16A6 Eng.
Civic, Civic Si, CRX, CRX Si
INT
31050
(1187-52)
EXH
31047
(1062-50)
INT
31050
(1187-52)
EXH
31047
(1062-50)
INT
1992-98 SOHC 16 valve V-TEC, V-TEC-E,
D16-Z6, Y7 & Y8 Eng.
Civic, Civic Si, CRX, CRX Si, Del Sol
31616
(1250-62)
EXH
31602
(1062-51)
208
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
HONDA (CONT'D)
L4
1590cc/1.6L
2.953" (75mm) Bore
1994-98 SOHC 16 valve V-TEC B16A3 Eng.
Civic, Civic Si, CRX, CRX Si, Del Sol
INT
30238
1.3820
1.102/1.160
.260
1.299
1.2559
.933
.254
1.103
1.5050
1.140/1.250
.325
1.378
1.2570
0.910
.285
1.102
1.5050
1.140/1.250
.325
1.340
1.2570
0.910
.285
1.100
1.5070
1.180
.300
1.417
1.3190
0.975
.280
1.181
1.3190
1.085
.305
1.180
1.5070
1.140/1.280
.325
1.376
1.3190
1.085
.305
1.180
1.5070
1.140/1.280
.325
1.376
1.3820
1.120
.325
1.299
1.2570
0.930
.325
1.102
1.3820
1.120
.325
1.299
1.2570
0.930
.325
1.102
1.3800
1.063
.313
1.339
1.2570
0.970
.270
1.142
1.3820
1.120
.325
1.260
1.2570
0.970
.270
1.142
1.3820
1.120
.325
1.299
1.2570
1.000
.305
1.181
1.8195
1.530/1.710
.307
1.736
1.6320
1.329
.280
1.453
1.4440
1.188
.250
1.339
1.3190
1.020
.258
1.181
(1375-56)
EXH
31105
(1250-58)
L4
1597cc/1.6L
2.913" (74mm) Bore
INT
1976-79 SOHC EF1, EF2, EF3 Eng.
Accord
30105
(1500-65)
EXH
31054
(1250-52)
L4
1751cc/1.8L
3.031" (77mm) Bore
INT
1979-81 SOHC EK1 Eng.
Accord, Prelude
30105
(1500-65)
EXH
31054
(1250-52)
INT
1982-83 SOHC EK1 Eng.
Accord, Prelude
31666
(1500-75)
EXH
31058
(1312-68)
L4
1829cc/1.8L
3.150" (80mm) Bore
1983-87 SOHC 12 valve A18A1, ES1, ES2, ES3,
ET2 Eng.
Accord, Accord DX, LX, SEi, Prelude
INT
30562
(1312-56)
EXH
31235
(1500-69)
L4
1955cc/2.0L
3.25" Bore
L4
1958cc/2.0L
3.189" (81mm) Bore
1986-90 SOHC 12 valve A20A, A20A1, A20A3,
B20A3, BS1, BS2, BT Eng.
Accord, Accord DX, LX, LXi, SEi,
Prelude Si
1988-91 DOHC 16 valve B20A5
Prelude, Prelude Si
INT
30562
(1312-56)
EXH
31235
(1500-69)
INT
31635
(1375-55)
EXH
31612
(1250-63)
L4
2056cc/2.1L
3.268" (83mm) Bore
INT
1990-91 DOHC 16 valve B21A1 Eng.
Prelude, Prelude Si
31635
(1375-55)
EXH
31612
(1250-63)
L4
2156cc/2.2L
3.346" (85mm) Bore
1990-96 SOHC 16 valve F22A, F22A1 Eng.
Accord, Accord DX, LX, SE, Prelude,
Prelude S, VTEC
INT
30787
(1375-18)
EXH
31613
(1250-64)
1994-97 SOHC 16 valve F22B2, F22B6,
V-Tec F22B1 Eng. Accord, Prelude
INT
31635
(1375-55)
EXH
31613
(1250-64)
1993-98 DOHC 16 valve H22A1, H22A4 Eng.
Accord, Prelude, Prelude Si
INT
31635
(1375-55)
31616
L4
2559cc/2.6L
3.64" (92.6mm) Bore
INT
1994-97 SOHC 4ZE1 Isuzu Eng.
Passport
31239
(1812-51)
EXH
30860
(1625-54)
V6
3165cc/3.2L
3.677" (93.4mm) Bore
INT
1994-97 SOHC 24 valve 6VD1 Isuzu Eng.
Passport
31161
(1437-5)
EXH
31623
(1312-66)
209
VALVE SEAT
(1250-62)
EXH
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
HYUNDAI
L4
1438cc/1.4L
73mm Bore
INT
1984-87 SOHC 4G33, Mitsubishi G12B Eng.
Pony
31655
1.4445
1.100
.293
1.340
1.3190
.977
.300
1.181
1.4445
1.100
.293
1.340
1.3190
.977
.300
1.181
1.3190
.977
.300
1.181
1.3190
.977
.300
1.181
1.4440
1.181
.280
1.380
1.3190
.977
.300
1.181
1.1320
0.890
.237
1.079
1.3190
.977
.300
1.181
1.3820
1.057
.240
1.260
1.4440
1.135/1.250
.316
1.339
1.3190
1.045
.316
1.201
1.4440
1.135/1.250
.316
1.339
1.3190
1.045
.316
1.201
1.7560
1.455/1.617
.310
1.5070
1.220/1.328
.310
1.4440
1.135/1.250
.316
1.339
1.3190
1.045
.316
1.201
1.8820
1.575/1.692
.317
1.811
1.6310
1.298
.317
1.496
1.7560
1.455/1.617
.310
1.693
1.5690
1.219
.317
1.378
1.4445
1.162
.214
1.339
1.2570
0.982
.212
1.181
1.4445
1.162
.310
1.339
1.2570
.982/1.102
.212
1.181
(1437-57)
EXH
31340
(1312-53)
L4
1468cc/1.5L
2.97" (75.5mm) Bore
INT
1986-89 SOHC 8 valve G4AJ Mitsubishi
G15B Eng. Excel
31655
(1437-57)
EXH
31340
(1312-53)
INT
1989-94 SOHC 8 valve G4AJP Mitsubishi
G15B Eng. Excel
31340
(1312-53)
EXH
31340
(1312-53)
INT
1990-94 SOHC 12 valve Vin J G4DJ Mitsubishi
4G15 Eng. Excel, Scoupe, Precis
31646
(1437-63)
EXH
31340
(1312-53)
L4
1495cc/1.5L
2.97" (75.5mm) Bore
1993-99 SOHC Vin N G4EK Eng. including Turbo
Scoupe
INT
INT
EXH
L4
1596cc/1.6L
3.24" (82mm) Bore
1992-95 DOHC G4CR, G4DRP, G4DMP Mitsubishi
Eng. Elantra
INT
31607
71607
(1125-53)
(1125-53N)
31340
71340
(1312-53)
(1312-53N)
31637
71637
(1375-63)
(1375-63N)
30809
(1437-68)
EXH
30563
(1312-64)
L4
1796cc/1.8L
3.24" (82mm) Bore
INT
1993-98 DOHC 16 valve G4CN Eng.
Elantra
30809
(1437-68)
EXH
30563
(1312-64)
L4
1997cc/2.0L
3.346" (85mm) Bore
INT
1985-91 SOHC G63B Eng.
Sonata, Stellar
31215
(1750-61)
EXH
31204
(1500-62)
INT
1992-98 DOHC 16 valve G4CP Mitsubishi Eng.
Sonata
30809
(1437-68)
EXH
30563
(1312-64)
L4
2350cc/2.4L
3.47" (86.5mm) Bore
INT
1989-91 SOHC G4CS Mitsubishi G64B Eng.
Sonata
31034
(1875-51)
EXH
31218
VALVE SEAT
(1625-56)
V6
2972cc/3.0L
3.59" (91.1mm) Bore
1990-97 SOHC G6AT Mitsubishi Eng. Gas and
optional LPG. Sonata
INT
EXH
31215
71215
(1750-61)
(1750-61N)
31287
71287
(1562-69)
(1562-69N)
INFINITI (ALSO SEE NISSAN)
L4
1998cc/2.0L
3.386" Bore
INT
1991-97 DOHC 16 valve SR 20DE Nissan Eng.
Vin C. Infiniti Passenger Car: G20
31661
(1437-71)
EXH
31618
(1250-57)
INT
1998-99 DOHC 16 valve SR 20DE Nissan Eng.
Int. w 1.339 vl. hd., .219 depth
31649
(1437-61)
EXH
31618
(1250-57)
210
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
INFINITI (CONT'D)
V6
2960cc/3.0L
3.430" (87mm) Bore
INT
1990-96 SOHC VG30, VG30E Nissan Eng.
Vin H. Infiniti Passenger Car: M30
31285
1.8180
1.500/1.555
.278
1.657
1.5060
1.179/1.287
.293
1.382
1.5070
1.175/1.235
.236
1.339
1.3195
0.965
.235
1.164
1.8180
1.500/1.555
.278
1.657
1.5060
1.179/1.287
.293
1.382
1.5695
1.260
.233
1.501
1.3820
1.107
.237
1.299
1.5680
1.250
.250
1.3810
1.125
.266
1.313
1.3810
1.125
.266
1.313
1.1920
1.000
.188
1.094
1.0045
0.750
.188
.906
1.3810
1.125
.266
1.313
1.3810
1.125
.266
1.313
1.4425
1.188
.219
1.342
1.1920
1.000
.188
1.156
1.3175
1.063
.188
1.218
1.4425
1.188
.219
1.342
1.1920
1.000
.188
1.156
1.6300
1.375
.219
1.500
1.4425
1.188
.219
1.312
1.6300
1.375
.219
1.500
1.4425
1.188
.219
1.312
(1812-55)
EXH
31247
(1500-68)
INT
1992-97 DOHC 24 valve VG30D, VG30DE,
VG30DTT (Turbo) Nissan Eng.
Infiniti Passenger Car: J30
V6
3275cc/3.0L
92mm Bore
31205
(1500-77)
EXH
31625
71625
(1312-63)
(1312-63N)
INT
1997-98 SOHC VG33E Nissan Eng.
Infiniti Passenger Car: QX4
31285
(1812-55)
EXH
31247
(1500-68)
V8
4494ci/4.5L
93mm Bore
1990-97 DOHC 32 valve VH45D, VH45DE Nissan
Eng. Vin N. Infiniti Passenger Car: Q45
INT
31677
(1562-73)
EXH
31638
(1375-60)
INGERSOLL-RAND
KVS Fuel Injection Seat for Counter
Bore w/1364
INT
30645
70645
(1562-7)
(1562-7N)
INTERNATIONAL (IHC) TRACTOR & INDUSTRIAL
2 Cyl
53.9ci
3.250" Bore
L4
60ci/1.0L
2.625" Bore
L4
108ci/1.8L
3.250" Bore
L4
113ci/1.8L
3.000" Bore
31157
(1375-5)
EXH
IHC C-60, U-1, UC-60 Eng.
Baler: 50AW, 50T, 55W
Combine: No. 52R, 64, 64-6, 64-7, 64HT
Tractor: Cub, Cub Lo-Boy, Cub 154 & 185
Lo-Boy
Wisconsin VG & VH Series Eng.
Baler: 56W. Windrower: 10 ft. - 16 ft.
175 Series
LPG, Propane, Natural Gas applications,
see above.
EXH
71157
(1375-5N)
31609
71609
(1187-1)
(1187-1N)
31600
(1000-1)
INT
31157
(1375-5)
EXH
INT
31157
71157
(1375-5)
(1375-5N)
31030
(1437-3)
EXH
EXH
INT
31609
71609
(1187-1)
(1187-1N)
30775
70775
(1312-1)
(1312-1N)
31030
(1437-3)
EXH
INT
31609
71609
(1187-1)
(1187-1N)
30648
(1625-1)
EXH
INT
EXH
31030
71030
(1437-3)
(1437-3N)
30648
70648
(1625-1)
(1625-1N)
71030
(1437-3N)
211
VALVE SEAT
IHC C113 Eng.
Baler: 55T,55W, 56T, 56W, 57T, 57W
Combine: No. 22, No. 62, 64, 64-6, 64-7,
64HT, 76-6, 76-7
Tractors (incl. Farmall): A, AV, B, BN, C,
Super A, A-1, AC, AV, AV-1, C, 100,
100HC, 130, 140, 140HC, 200, 230, 240
Windrower: 10 ft. - 16 ft., 161, 163
IHC C123 Gas Eng. Baler: 55
Combine/Tractor: A, AI, AV, AVI, B,
BN, C, I-140, T4, Super AI and AVI,
Gas. 100HC, 200
Super C before Serial # 36000
IHC C123 Eng. - U123 Series Power
Unit/Tractor: DU132, DU132D, U123
after serial # 36000
INT
31157
(1375-5)
L4
123ci/2.0L
3.125" Bore
INT
Wisconsin TH & V Series Eng.
Baler: 37, 45, 46, 47
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
INTERNATIONAL (IHC) TRACTOR & INDUSTRIAL (CONT'D)
L4
135ci/2.2L
3.250" Bore
L4
146ci/2.4L
3.375" Bore
L4
152ci/2.5L
3.375" Bore
IHC C135 Early & Late Eng.
Combine: 91, 93 Forklift: 4000
Power Unit: UC135, UC135B
Tractor: A, AI, AV, B, BN, C, 100, 201,
330, 340, 404, LoBoy 404, 1330, 2404,
Lo-Boy 2404, T5, TC5, T340, T340A
Windrower: 201
IHC C146 Eng. Crawler: 500
Tractor: 424, 500, 500C, 660, 770, 780,
880, 2424
IHC C152 Eng.
Power Unit: IU4, U4, U164, UC153
Tractor: H, HV, I-4, IU4, O4, OS4, W, W4,
4 Series, Super H, Super W4
INT
EXH
INT
L3
155ci/2.5L
3.875" Bore
L4
157ci/2.6L
3.375" Bore
L4
164ci/2.7L
3.500" Bore
VALVE SEAT
L4
166ci/2.7L
3.6875" Bore
L4
169ci/2.8L
3.563" Bore
IHC C153 Eng.
Combine: 93, 105, 122, 203
Forklift: 4500A, 4500B
Payloader: H25B
Tractor: H30F, H30R, 210, 225, 230,
444, 504, 2400A, 2400B, 2405B, 2410B,
2412B, 2444, 2500, 2504, 3514, 4000
Windrower: 275, 375
IHC/Neuss D155 Diesel Eng.
EXH
INT
1.375
.219
1.500
31030
71030
(1437-3)
(1437-3N)
1.4425
1.188
.219
1.312
30648
1.6300
1.375
.219
1.500
31030
71030
(1437-3)
(1437-3N)
1.4425
1.188
.219
1.312
30643
1.5680
1.312
.219
1.500
1.4440
1.250
.219
1.375
1.5050
1.250
.250
1.375
1.6300
1.375
.219
1.500
1.4425
1.188
.219
1.312
1.7550
1.438
.250
1.6920
1.406
.250
1.8810
1.625
.219
1.781 30º
1.5670
1.312
.219
1.516 30º
1.5680
1.312
.219
1.500
1.5050
1.250
.250
1.375
1.6920
1.438
.219
1.652
1.3800
1.125
.219
1.300
1.6300
1.375
.219
1.500
1.5050
1.250
.219
1.375
1.8810
1.625
.219
1.781 30º
1.5670
1.312
.219
1.516 30º
1.8810
1.625
.219
1.781 30º
1.5670
1.312
.219
1.516 30º
(1562-1)
EXH
INT
30556
70556
(1437-1)
(1437-1N)
30712
70712
(1500-3)
(1500-3N)
30648
(1625-1)
EXH
INT
EXH
INT
IHC C157 Eng.
Forklift: 4500, 4500A, 4500B
Tractor: 454, 2400A, 2400B, 2405B,
2410B, 2412B
IHC C164 Eng.
Power Unit: U164
Tractor: H, Super H, HV, W4, Series 4
1.6300
(1625-1)
EXH
L4
153ci/2.5L
3.375" Bore
30648
(1625-1)
31030
71030
(1437-3)
(1437-3N)
30656
70656
(1750-4)
(1750-4N)
30670
70670
(1687-1)
(1687-1N)
30681
(1875-6)
EXH
INT
30838
70838
(1562-8)
(1562-8N)
30643
(1562-1)
EXH
INT
IHC D166 Diesel Eng.
Tractor: 340, Farmall 340D, TD340,
TD340A
EXH
INT
IHC C169 Eng.
Power Unit: U169
Tractor: 300, 300HC, 350
30712
70712
(1500-3)
(1500-3N)
30664
70664
(1687-2)
(1687-2N)
30558
70558
(1375-1)
(1375-1N)
30648
(1625-1)
EXH
INT
HD Applications w 30º seat angle
30711
70711
(1500-1)
(1500-1N)
30681
(1875-6)
EXH
L4
175ci/2.8L
3.563" Bore
IHC C175 Eng. (3 9/16" Bore)
Combine: 454
Power Unit: U175
Tractor: I-300, I-350, 454, 464, 2400, 2400A,
2400B, 2405, 2405B, 2410, 2410B, 2412,
2412B, 3400, 3400A, 3514, T7 Series C
INT
70838
(1562-8N)
30681
(1875-6)
EXH
212
30838
(1562-8)
30838
70838
(1562-8)
(1562-8N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L4
175ci/2.8L
3.625" Bore
L3
179ci/2.9L
3.875" Bore
INT
IHC C175 Eng. (3 5/8" Bore)
Tractor: 350, W350, 375 Series
Power Unit: U175
EXH
Forklift: 4500
Tractor: 240A, 240AHS, 454, 464, 484,
2400A, 2400B, 3400A Series
INT
L4
193ci/3.2L
3.750" Bore
L4
200ci/3.3L
3.8125" Bore
L4
206ci/3.4L
3.875" Bore
L6
221ci/3.6L
3.563" Bore
See applications above.
INT
Tractor: 504, 504D, 2504D, 3514,
3514D, H25B, S7A, S7B, Farmall 504,
2504, 2504D
F-20 Continental D 193 Eng.
IHC Tractor: 300, 350
1.500
IHC C200 Eng.
Forklift: 800, 8000
Loader: 100 Series C, 3514
Tractor: 454, 464, Farmall 544, I 544,
544, 574, 674, 2400A, 2400B, 2405B,
2410B, 2412B, 2500A, 2500B, 2505B,
2510B, 2514B, 2544, 3400A, 3500A, 3514
Windrower: ND 375, 375 self propelled
Tractor: 584
w 1.781 vl. hd., .219 depth
IHC/AMC Hi-Torque C232 Eng.
Windrower: 275, 375 Self-Propelled
1.5050
1.250
.250
1.375
1.6920
1.438
.219
1.652
70664
EXH
39046
79046
1.6535
1.338
.394
1.611
EXH
31272
71272
1.6560
1.313
.375
1.611
30656
70656
1.7550
1.438
.250
(1750-4)
(1750-4N)
1.6920
1.406
.250
1.6920
1.438
.219
1.652
1.3800
1.125
.219
1.300
1.8800
1.562
.250
1.8800
1.562
.250
1.8810
1.625
.219
1.781 30º
1.5670
1.312
.219
1.516 30º
1.7550
1.438
.250
1.6920
1.406
.250
1.6920
1.438
.250
1.656
1.5670
1.312
.219
1.516 30º
1.8810
1.625
.219
1.781 30º
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
1.6920
1.438
.219
1.652
1.3800
1.125
.219
1.300
1.7550
1.500
.219
1.679
1.5050
1.250
.250
1.375
1.8810
1.594
.250
INT
EXH
INT
INT
EXH
INT
INT
30664
70664
(1687-2)
(1687-2N)
30558
70558
(1375-1)
(1375-1N)
30509
30509
70509
(1875-2)
(1875-2N)
30681
30838
70838
(1562-8)
(1562-8N)
30656
70656
(1750-4)
(1750-4N)
30670
70670
(1687-1)
(1687-1N)
30673
(1687-3)
EXH
INT
INT
30838
70838
(1562-8)
(1562-8N)
30681
70681
(1875-6)
(1875-6N)
30682
(1875-1)
INT
INT
213
70670
(1687-1N)
(1875-6)
IHC D236 Diesel Eng. (Late)
Tractor: H30A, H30B, H30B-F, H30B-R,
H30F, H30R, 315, 315D, 460D, 460VD,
606D, 2606, 2606D, 3616, 3616D
30670
(1687-1)
(1875-2)
EXH
Loader: 250A, 250AHS
Tractor: 514, 574, 674, 684, 2500A,
2500B, 2544, 3500A, 3514, Farmall 544
70712
(1500-3N)
(1687-2N)
EXH
IHC C221 Eng.
Combine: 205, 303, 315
Tractor: 460, 460V, 606, 2606, 3616
30712
(1500-3)
30664
EXH
Alt. Exh. w 1.375" vl. hd., .250 depth
L4
239ci/3.9L
3.875" Bore
.219
EXH
EXH
INT
30711
70711
(1500-1)
(1500-1N)
30664
70664
(1687-2)
(1687-2N)
30558
70558
(1375-1)
(1375-1N)
30658
70658
(1750-2)
(1750-2N)
30712
70712
(1500-3)
(1500-3N)
30687
70687
(1875-7)
(1875-7N)
EXH
39046
79046
1.6535
1.338
.394
1.611
EXH
31272
71272
1.6560
1.313
.375
1.611
VALVE SEAT
L6
236ci/3.9L
3.688" Bore
1.313
L6
232ci/3.8L
3.312" Bore
1.6300
(1687-2)
EXH
L4
188ci/3.1L
3.6875" Bore
30649
(1625-4)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L4
239ci/3.9L
3.875" Bore
L4
248ci/4.1L
3.875" Bore
L6
263ci/4.3L
3.563" Bore
L6
264ci/4.3L
3.688" Bore
L4
264ci/4.3L
4.000" Bore
L4
281ci/4.6L
4.125" Bore
INT
EXH
IHC C248 Gas Eng.
Tractor: I-6, IU6, IV6, M, MV, O6, OS6,
Super M, Super MV, T6, T6 (61 Series),
U6, W6, 6 Series
Tractor: ID6, ID10, IUD6, MD, MDV, ODS6,
TD6, TD6 (61 Series), WD6, 6 Series,
400D
IHC C263 Eng.
Baler: 50 Combine: 403, 615
Tractor: H30B, I 656, T6, 414, 416, 420,
422, 460, 460HC, 560, 560HC, 606, 656,
660, 706, 706AWD, 706HC, 2606, 2656,
2706, 3600, 3600A, 3616, 3800, 3850
IHC BD264 Eng. (3 11/16" Bore)
Combine/Loader: 151 Hillside, 151HT,
181, 303 Picker: 414, 420
w 1.781 vl. hd., .219 depth
IHC C264 Eng, Gas & LPG. (4.000" Bore)
Tractor: I-6, M, MV, O-6, Super 6
Series, Super M, Super MTA, Super MV,
Super W6, T6, U264, W400, 16, 400
Tractor: MD, MDV, Super 6 Series,
Super MDV, Super WD6, W400D, 400D
INT
EXH
INT
EXH
INT
VALVE SEAT
70670
(1687-1N)
30682
1.438
.250
1.6920
1.406
.250
1.8810
1.625
.250
1.812
30904
70904
(1812-7)
(1812-7N)
1.8170
1.438
.250
1.656
30672
70672
(1812-5)
(1812-5N)
1.8180
1.500
.250
1.723
30643
70643
(1562-1)
(1562-1N)
1.5680
1.312
.219
1.536
30681
1.8810
1.625
.219
1.656&1.781
1.5670
1.312
.219
1.516 30º
1.6920
1.438
.250
1.656
1.5670
1.312
.219
1.516 30º
1.8810
1.625
.219
1.781 30º
1.8810
1.625
.250
1.812
1.8170
1.438
.250
1.656
1.8180
1.500
.250
1.723
1.5680
1.312
.219
1.536
1.8810
1.625
.250
1.812
1.8170
1.438
.250
1.656
1.8180
1.500
.250
1.723
1.5680
1.312
.219
1.536
1.6920
1.438
.219
1.656
1.5670
1.312
.219
1.516 30º
1.8810
1.625
.219
1.781 30º
1.6920
1.438
.219
1.652
1.3800
1.125
.219
1.300
(1875-6)
EXH
INT
30º
30838
70838
(1562-8)
(1562-8N)
30673
(1687-3)
EXH
INT
INT
EXH
INT
EXH
EXH
INT
EXH
30670
(1687-1)
1.7550
30838
70838
(1562-8)
(1562-8N)
30681
70681
(1875-6)
(1875-6N)
30682
70682
(1875-1)
(1875-1N)
30904
70904
(1812-7)
(1812-7N)
30672
70672
(1812-5)
(1812-5N)
30643
70643
(1562-1)
(1562-1N)
30682
(1875-1)
Tractor: W450D, 450D
L6
282ci/4.6L
3.688" Bore
70656
(1750-4N)
(1875-1)
INT
IHC C281 Gas Eng.
Tractor: T6, TD6, W450, 400, 450
30656
(1750-4)
IHC C282 Gas & LPG Eng.
Combine: 403, 503
Tractor: T6 (62 Series), 460DHC, 2656,
3600, 3800, 3850
w 1.781 vl. hd., .219 depth
Combine: 403D, 503D, 615D
Loader: 150, 151, 181
Tractor: H50A, H50B, H50C, I 656, L150,
TD6, TD6 (62 Series), TD9, TD9 (92 Series),
TD9B, TD92, UD282, 214, 220, 414, 416,
420, 422, 560D, 560DHC, 656D, 660D,
706D, 706D-AWD, 706D-HC, 2510, 2544,
2656, 2656D, 2706, 2706D, 3600A, 3600D,
3800, 3800D, 3850, 3850D
INT
EXH
INT
INT
EXH
214
30904
70904
(1812-7)
(1812-7N)
30672
70672
(1812-5)
(1812-5N)
30643
70643
(1562-1)
(1562-1N)
30664
70664
(1687-2)
(1687-2N)
30838
70838
(1562-8)
(1562-8N)
30681
70681
(1875-6)
(1875-6N)
30664
70664
(1687-2)
(1687-2N)
30558
70558
(1375-1)
(1375-1N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L6
282ci/4.6L
3.688" Bore
L6
291ci/4.8L
3.750" Bore
L6
301ci/4.9L
3.813" Bore
V8
304ci/5.0L
3.875" Bore
L6
310ci/5.1L
3.875" Bore
Loader: 150, 151, 181
Tractor: H50A, H50B, H50C, UD282, 403,
416, 422, 560, 615, 656, 660, 706, 2656,
2706, 3600A, 3800, 3850, TD6, TD-9
62 Series Eng. S/N 3624 and 40699 on
IHC C291 Eng. Forklift: 9000
Tractor: Hydro, Hydro 70, Hydro 86,
616, 622, 666, 686, 706, 756, 766,
2706, 2756, 9000
IHC C301 Gas Eng.
Combine: 403, 453, 503, 715
Forklift: 9000
Tractor: H50A, H50B, H50C, H60B, 560,
616, 622, 806, 806AWD, 806HC, 826,
856, 2806, 2826, 2856, 9000
Combine: 403D, 503D, 715D, 756D
Tractor: H60B
INT
EXH
INT
EXH
INT
30681
.219
1.679
1.5050
1.250
.250
1.375
1.8810
1.625
.219
1.781 30º
30838
70838
(1562-8)
(1562-8N)
1.5670
1.312
.219
1.516 30º
30681
1.8810
1.625
.219
1.781 30º
EXH
INT
EXH
30838
70838
(1562-8)
(1562-8N)
1.5670
1.312
.219
1.516 30º
30658
70658
(1750-2)
(1750-2N)
1.7550
1.500
.219
1.679
30712
70712
(1500-3)
(1500-3N)
1.5050
1.250
.250
1.375
31764
2.0150
1.828
.188
1.969
1.6772
1.417
.315
1.609
1.6920
1.438
.219
1.689
(2015E-1)
EXH
Forklift: 9000 Harvester: 95
Tractor: Farmall 706, 756. Hydro 86.
686, 706, 756, 2706, 2756, 3820A
INT
INT
71373
(1678E-1N)
30664
70664
(1687-2)
(1687-2N)
EXH
39046
79046
1.6535
1.338
.394
1.611
EXH
31272
71272
1.6560
1.313
.375
1.611
30656
70656
1.7550
1.438
.250
(1750-4)
(1750-4N)
1.6920
1.406
.250
2.2560
1.875
.281
2.094
2.0060
1.688
.282
1.906
2.0060
1.688
.282
1.875
1.6920
1.438
.250
1.687
2.0150
1.828
.188
1.969
1.6772
1.417
.315
1.609
2.2560
1.875
.281
2.094
2.0060
1.688
.282
1.875
2.0060
1.688
.282
1.875
1.6920
1.438
.250
1.687
INT
IHC C335 Gas Eng.
Tractor: ID9, IUD9, TD9, 9 Series
31373
(1678E-1)
30670
70670
(1687-1)
(1687-1N)
31252
(2250-2)
EXH
Power Unit: IU9, U9
Tractor: D20, D25, G20, G25, I-9, TD9,
TD9 (91 Series), WD9, WDR9
IHC V345 Eng.
Combine: 815, 915
Power Units: UV 345
INT
EXH
INT
70700
(2006E-1N)
30700
70700
(2006E-1)
(2006E-1N)
30673
70673
(1687-3)
(1687-3N)
31764
(2015E-1)
EXH
INT
IHC C350 Gas Eng. Series 9
Payloader, Power Unit & Tractor
30700
(2006E-1)
31373
71373
(1678E-1)
(1678E-1N)
31252
(2250-2)
EXH
Payloader: 12
Power Unit: IUD9, UD9, UD9A, UD350
Tractor: 9 Series, Super 9 Series,
Super WD9, WDR9, TD9, WD9, WDR9,
600D, 650, 650D
215
INT
EXH
30700
70700
(2006E-1)
(2006E-1N)
30700
70700
(2006E-1)
(2006E-1N)
30673
70673
(1687-3)
(1687-3N)
VALVE SEAT
L4
350ci/5.7L
4.500" Bore
70712
(1500-3N)
1.500
V8
345ci/5.6L
3.875" Bore
30712
(1500-3)
1.7550
(1875-6)
EXH
L4
335ci/5.5L
4.406" Bore
70658
(1750-2N)
(1875-6)
INT
IHC V304 Eng.
Combine: 815, 915
Power Units: UV304
30658
(1750-2)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
1.689
L6
358ci/5.9L
3.875" Bore
Tractor: Farmall 826, 826, 886,
1420, 2826, 3288
INT
INT
EXH
EXH
EXH
L6
360ci/5.9L
3.875" Bore
L6
361ci/5.9L
4.125" Bore
V8
392ci/6.4L
4.125" Bore
L6
407ci/6.7L
4.321" Bore
L6
414ci/6.8L
4.300" Bore
VALVE SEAT
L6
436ci/7.1L
4.300" Bore
L4
461ci/7.5L
4.750" Bore
L6
466ci/7.6L
4.300" Bore
L6
525ci/8.6L
4.500" Bore
IHC D360 Diesel, DT360 Turbo Diesel
Combine: 453D Payloader: 515
Power Unit: PK40, PK50, UDT360,
Tractor: 766D, 886
IHC D361 Diesel & DT361 Turbo Diesel
Eng. Loader: 175
Payscraper: E200
Power Unit: UD361, UDT 361
Tractor: E200, Farmall 1206, H60B, H65C,
L175, L175B, TD15B, 806D, 806D-AWD,
806D-HC, 1206, 1206D, 2806
IHC - V392 Eng.
Combine: 915
INT
70664
(1687-2N)
39046
31272
1.6920
1.438
.219
79046
71272
1.6535
1.338
.394
1.611
1.6560
1.313
.375
1.611
30656
70656
1.7550
1.438
.250
(1750-4)
(1750-4N)
1.6920
1.406
.250
1.7825
1.490
.340
1.710 30º
1.5365
1.255
.359
1.455
2.0060
1.750
.313
1.940
1.6570
1.312
.395
1.625
2.1300
1.938
.188
2.078
1.8035
1.571
.312
1.734
2.0060
1.750
.313
1.940
1.6570
1.312
.395
1.625
2.0010
1.712
.385
1.970 30º
1.6285
1.348
.365
1.600
2.0010
1.712
.385
1.970 30º
1.6285
1.348
.365
1.600
2.0680
1.750
.281
2.000
1.8800
1.562
.250
1.750
2.0010
1.712
.385
1.970 30º
1.6285
1.348
.365
1.600
2.0060
1.688
.282
1.875
1.6920
1.438
.250
1.687
30670
70670
(1687-1)
(1687-1N)
31722
71722
(1782E-1)
(1782E-1N)
EXH
71671
(1536E-2N)
INT
30694
70694
(2000-18)
(2000-18N)
EXH
71697
(1657E-1N)
INT
31773
(2125-3)
EXH
INT
Eng.
Combine: 815-915
Loader: 175B Paylogger: S11
EXH
Payscraper: E200, E211
Power Unit: UD407, UDT407
Tractor: E200, E211, H65C, L175B, S11A,
TD15B, 856D, 1026, 1256, 1456, 2856,
2856D, 21026, 21026D, 21206D, 21256,
21256D, 21456, 21456D
INT
Eng. Combine: 815, 915
Power Unit: UD414, UDT414. Tractor:
EXH
E200, Farmall 966, H65C, 960, 966, 1066, 1086
INT
Eng. Combine: 1460, 1480
Tractor: Hydro, Hydro 100, 186, 986,
EXH
1440, 1466, 1486, 1566, 1586, 3388, 3588,
3688, 4100, 4156, 4166, 4186, 5088, 6388
INT
Power Unit: PD40, UD14, UD14A, UD461
Tractor: D30, D38, ID40, TD14,
EXH
TD14 (142 Series), TD14A, TD14A (141 &
142 Series), TD35, TD40
IHC D466 Diesel & DT466, DT466B,
INT
DTI 466B Turbo Diesel Eng.
Power Unit: UD466, UDT466
EXH
Tractor: E412, E433, Farmall 4366, H80B,
L175C, TD15C, 442, 3588, 3788, 4366,
4386, 5288, 5488, 6588, 7388
INT
Power Unit: UD525
Tractor: TD15
EXH
216
30664
(1687-2)
31723
71723
(1803E-1)
(1803E-1N)
30694
70694
(2000-18)
(2000-18N)
71697
(1657E-1N)
31756
71756
(2001E-1)
(2001E-1N)
71681
(1628E-1N)
31756
71756
(2001E-1)
(2001E-1N)
71681
(1628E-1N)
31769
71769
(2062-2)
(2062-2N)
30509
70509
(1875-2)
(1875-2N)
31756
71756
(2001E-1)
(2001E-1N)
71681
(1628E-1N)
30700
70700
(2006E-1)
(2006E-1N)
30673
70673
(1687-3)
(1687-3N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L6
554ci/9.1L
4.625" Bore
L6
691ci/11.3L
4.750" Bore
INT
Power Unit: UD554
Tractor: TD15 (150 & 151 Series)
EXH
Power Unit: PD80, UD18, UD18A, UD691
Tractor: TD18, TD18A, TD18A (181 &
182 Series), TD20 (200 & 201 Series)
INT
EXH
30700
70700
(2006E-1)
(2006E-1N)
30673
70673
(1687-3)
(1687-3N)
31769
71769
(2062-2)
(2062-2N)
30509
70509
(1875-2)
(1875-2N)
2.0060
1.688
.282
1.875
1.6920
1.438
.250
1.687
2.0680
1.750
.281
2.000
1.8800
1.562
.250
1.750
2.0150
1.828
.188
1.969
1.6772
1.417
.315
1.609
1.8180
1.500
.250
1.687
1.5680
1.250
.219
1.439
2.1300
1.938
.188
2.078
1.8035
1.571
.312
1.734
1.8180
1.500
.250
1.687
1.5680
1.250
.219
1.439
1.6920
1.438
.250
1.656
1.5675
1.313
.219
1.516 30º
1.8180
1.500
.250
1.687
1.5680
1.250
.219
1.439
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
1.8180
1.500
.250
1.687
1.5680
1.250
.219
1.439
INTERNATIONAL (IHC) / NAVISTAR TRUCK
L4
152ci/2.5L
3.875" Bore
L6
175ci/2.9L
3.000" Bore
L4
196ci/3.2L
4.125" Bore
1961-68 IHC Navistar 4-152, 4-152T, B-152 Truck
Eng. IHC Truck: 1/2 Ton, Scout, C-900,
CH-90, CM75-80, CM110-130, CMU85,
D900, M700-800, M1100, S-80, 900 Series
1937-49 IHC Navistar GRD175, 175A, HD3,
HD174 Truck Eng. IHC Truck:
C12-15, C30-31, CS30, D2-3, D30,
DS30, K1-2-3, K4-5, KB1-3-5, KS4-5
Series
IHC Navistar 4-196 Truck Eng.
IHC Truck: 1/2 Ton, Scout, M700-800,
M1100, MA1500 Series
INT
31764
(2015E-1)
EXH
INT
31373
71373
(1678E-1)
(1678E-1N)
30672
(1812-5)
EXH
INT
30640
70640
(1562-6)
(1562-6N)
31773
(2125-3)
EXH
31723
(1803E-1)
L6
213, 214ci/3.5L
3.313" Bore
L6
220ci/3.6L
3.563" Bore
L6
232ci/3.8L
3.313" Bore
217
30672
(1812-5)
EXH
INT
30640
70640
(1562-6)
(1562-6N)
30673
(1687-3)
EXH
INT
30838
70838
(1562-8)
(1562-8N)
30672
(1812-5)
EXH
INT
30640
70640
(1562-6)
(1562-6N)
30682
(1875-1)
EXH
INT
30711
70711
(1500-1)
(1500-1N)
30672
(1812-5)
EXH
30640
70640
(1562-6)
(1562-6N)
VALVE SEAT
L6
233ci/3.8L
3.313" Bore
INT
L6
232ci/3.8L
3.750" Bore
1937-49 IHC-Navistar GRD 214, 214A, HD3,
HD213, HD213A Truck Eng.
IHC Truck: D2-3, D15, D20, D30, DS30,
K1-2-3, K4-5, KB1-5, KBS Series
1960-68 IHC-Navistar BD220, BG220,
SD220 Truck Eng. IHC Truck:
1/2, 3/4, 1 Ton, A Series, AB Series,
AC-ACF Series, AM-AMC Series, B100BC100 Series, C100 Series, C1000 Series,
CH90, CM75-80, CM110-130, CMU85,
L110-132, LM120-LM210, M700-800, M1100,
M1200-1400, M1500-1600, MA1200-1600,
R100-165, RA120-140, RM120-150-160,
S100 Series, S1700 Series, SA120-140,
SC160-180, SM120-130-150 Series
1937-49 IHC-Navistar HD232, HD232A, HD232C,
232, 232A, 232C Truck Eng.
Eng. IHC Truck: D30, D186T, D300,
DS30, DS186T, DS300 Series
1969-78 AMC 6-232 Eng. IHC Truck: 1/2, 3/4,
1 Ton P.U., 1100D, 1110, 1200D, 1210,
1300D, 1310, 1500, 1510 (all incl. 4x4),
Scout II 4x4 incl. 800A, 800B, SR2-800A
1937-50 IHC-Navistar HD3, GRD233, GRD233A
IHC Truck: K4-5,
KBS Series, KS4-5
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
INTERNATIONAL (IHC) / NAVISTAR TRUCK (CONT'D)
L6
240ci/3.9L
3.563" Bore
L6
241ci/4.0L
3.375" Bore
L6
241ci/4.0L
3.563" Bore
L6
250ci/4.1L
3.438" Bore
L6
258ci/4.2L
3.750" Bore
L6
259ci/4.3L
3.500" Bore
L6
264, 265ci/4.3L
3.688" Bore
VALVE SEAT
L6
269ci/4.4L
3.563" Bore
L6
282ci/4.6L
3.813" Bore
L6
301ci/4.9L
3.813" Bore
1950-69 IHC-Navistar BD240, BG240, Early
SD240. IHC Truck: 1/2,
3/4, 1 Ton, A, AB, AC-ACF, AM-AMC,
B100-BC100, BD100, C100, C1000,
L110-L165, LB140, LC160, R100-R165,
RB120-RB140, RC160, RM120-150-160,
S-100, S1700, SA120-140, SC160-180,
SM120-130-150, SM160 Series
1937-40 IHC-Navistar FAB241 Truck Eng.
IHC Truck
INT
INT
EXH
INT
INT
INT
1.656
30682
1.8810
1.625
.250
1.780
30838
70838
(1562-8)
(1562-8N)
1.5675
1.313
.219
1.516 30º
30658
1.7550
1.500
.219
30643
70643
(1562-1)
(1562-1N)
1.5680
1.312
.219
30673
1.6920
1.438
.250
1.656
30682
1.8810
1.625
.250
1.780
1.5675
1.313
.219
1.516 30º
1.7550
1.500
.250
1.5680
1.312
.219
1.8810
1.625
.250
1.787
1.5050
1.250
.219
1.406
1.7550
1.500
.219
1.656
1.5680
1.312
.219
1.476
1.8810
1.625
.250
1.780
1.5675
1.313
.219
1.516 30º
1.7550
1.500
.219
1.656
1.5680
1.312
.219
1.476
1.8810
1.625
.250
1.812
1.7550
1.438
.219
1.616
1.6920
1.438
.219
1.652&1.679
1.3800
1.125
.188
1.300&1.375
(1875-1)
EXH
INT
30838
70838
(1562-8)
(1562-8N)
30659
(1750-1)
INT
30643
70643
(1562-1)
(1562-1N)
30682
(1875-1)
EXH
INT
30711
70711
(1500-1)
(1500-1N)
30658
(1750-2)
INT
30643
70643
(1562-1)
(1562-1N)
30682
(1875-1)
EXH
INT
30838
70838
(1562-8)
(1562-8N)
30658
(1750-2)
EXH
INT
30643
70643
(1562-1)
(1562-1N)
30682
(1875-1)
EXH
INT
30655
70655
(1750-3)
(1750-3N)
30664
(1687-2)
EXH
218
.250
(1687-3)
EXH
1955-69 IHC-Navistar BD264, BG264, BG265
Truck Eng. IHC Truck: 1/2, 3/4, 1 Ton,
A, AC-ACF, AM-AMC, B100-BC100,
BD100, CO1600, F1700-1800, MC1600-1700,
R1700-1705, RC160, S100, S1700, SC160180, SM160, 1000-1500, 1600-1800 Series
1942-56 IHC-Navistar BD269, BLD269, BLD269A
Truck Eng. IHC Truck: CO180, K7, KB6-7,
KBS, KS6, KS7, L170-185, L300, LC180,
LF170, R170-184, RF170, RF180, S100,
S1700, S1840, SF170-180 Series
1953-71 IHC-Navistar BD282 Truck Eng.
IHC Truck: A, AC-ACF, B100-BC100,
BC1890, BCF, CO180, F1700-1800, R170184, R1700-1705, RC180, RF170, S100,
S1700, S1840, SC160-180, SF170-180,
173FC-183FC, 1600-1800, 1890 Series
1963-70 IHC-Navistar D301 Diesel Eng.
IHC Truck: 1600 Series
1.438
(1750-2)
EXH
1971-81 AMC 6-258 Eng.
IHC Truck: 1/2 3/4, 1 Ton, Scout.
100, 200, 500, 1000D, 1010, 1100D,
1110, 1200D, 1210, MS1210, 1300D,
1310, 1500D, 1510, MS1510 (all incl 4x4)
1938-40 IHC-Navistar FAB 259 Eng.
IHC Truck
1.6920
(1875-1)
EXH
IHC-Navistar BG241 Truck Eng.
IHC Truck: 1/2, 3/4, 1 Ton, AB, AM-AMC,
C100, C1000, D1000, M1200-1400,
M1500-1600, MC1600-1700, SA120-140,
SM120-130-150, SM160 Series,
1000 to 1500 Series
1941-49 IHC-Navistar BLD 250 Truck Eng.
IHC Truck: K6, KBS, KS6 Series
30673
(1687-3)
30790
70790
(1375-4)
(1375-4N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
V8
304ci/5.0L
3.875" Bore
L6
308ci/5.0L
3.813" Bore
L6
318ci/5.2L
3.875" Bore
V8
345ci/5.6L
3.875" Bore
L6
361ci/5.9L
4.125" Bore
L6
372ci/6.1L
4.375" Bore
V8
392ci/6.4L
4.125" Bore
L6
401ci/6.6L
4.125" Bore x
5.000" Stroke
V8
404ci/6.6L
4.125" Bore
EXH
INT
1954-69 IHC-Navistar RD372, RED372 Eng.
IHC Truck: CO190-200, CO220-225,
COF190-200, F1900, L190, LF190,
R185-225, R1850, RC190-200, RF190200, S1853, T1900, V196, 1850, 19002000 Series
1966-88 IHC-Navistar V392 Eng.
IHC Truck 1/2, 3/4, 1 Ton Scout,
Travelall, CO1600, CO1700, CO1800,
COF1810A, VCO, 183RE, 1000-1500,
1600-1800, 1890 Series
IHC Truck: 1/2, 3/4/ 1 Ton Travelall
EXH
INT
INT
219
1.828
.188
1.969
31373
71373
(1678E-1)
(1678E-1N)
1.6772
1.417
.315
1.609
30682
1.8810
1.625
.250
1.812
30655
70655
(1750-3)
(1750-3N)
1.7550
1.438
.219
1.616
31791
71791
(2375-1)
(2375-1N)
2.3800
2.000
.188
2.250
30650
70650
(1625-3)
(1625-3N)
1.6300
1.313
.250
31764
2.0150
1.828
.188
1.969
1.6772
1.417
.315
1.609
2.3820
2.000
.281
1.7550
1.375
.250
2.3800
2.000
.188
2.250
1.8810
1.594
.250
1.781
2.1300
1.938
.188
2.078
1.8035
1.571
.312
1.734
2.1305
1.812
.250
2.025
1.7550
1.438
.219
1.682
2.2555
1.938
.188 2.074 & 2.157
2.0060
1.625
.297
2.3820
2.000
.281
1.7550
1.375
.250
2.1300
1.812
.250
2.054
1.6544
1.367
.313
1.535
(2015E-1)
EXH
INT
31373
71373
(1678E-1)
(1678E-1N)
30994
(2375-2)
EXH
INT
EXH
INT
30653
70653
(1750-8)
(1750-8N)
31791
71791
(2375-1)
(2375-1N)
30687
70687
(1875-7)
(1875-7N)
31773
(2125-3)
EXH
INT
31723
71723
(1803E-1)
(1803E-1N)
30557
(2125-1)
EXH
1960-74 AMC/IHC-Navistar V401, VS401 Eng.
IHC Truck: ACO, CO201-205, CO1900,
COF1810A, F2000, T1900, V190-196,
V200, VCO, VCOF, VF, VT195, 193RC,
1900-2000 Series
1938-49 IHC-Navistar FBC401, RED401,
RED401A, RED401B Eng.
IHC Truck: K10-11, KB10, KBR,
KBS, KR, KS8-10-11 Series
1975-81 IHC-Navistar MV404 Eng.
IHC Truck: C1710, CO1800,
F1700-1800, 1600-1800 Series
2.0150
(1875-1)
EXH
1961-82 IHC-Navistar V345, V345A Eng.
IHC Truck: 1/2, 3/4, 1 Ton, Scout,
Travelall, B100-BC100, BC1890, BCF,
CO1600, CO1700, COF1810A, F1700-1800,
M1700, MC1600-1700, MS1210, VCO,
173FC-183FC, 900, 1000-1500, 1600-1800,
1890 Series
1938-49 IHC-Navistar FBB361, FBC361, RED361,
RED361A Eng. IHC Truck: K8, K10-11,
KB8, KBR, KBS, KR, KS8-10-11 Series
31764
(2015E-1)
INT
EXH
INT
EXH
INT
EXH
30655
70655
(1750-3)
(1750-3N)
30989
70989
(2250-1)
(2250-1N)
30726
70726
(2000-3)
(2000-3N)
30994
70994
(2375-2)
(2375-2N)
30653
70653
(1750-8)
(1750-8N)
30557
70557
(2125-1)
(2125-1N)
31696
71696
(1654E-1)
(1654E-1N)
1.812
VALVE SEAT
V8
401ci/6.6L
4.125" Bore x
3.750" Stroke
INT
V8
400ci/6.6L
4.165" Bore
1960-80 IHC V304, V304A Truck Eng.
IHC Truck: 1/2, 3/4, 1 Ton, Scout,
Travelall, AM-AMC, B100-BC100,
BC1890, BCF, BD110, C100, C1000,
CO1600, CO1700, D1000, F1700-1800,
M1500-1600, M1700, MA1500,
MC1600-1700, SM160, 900, 1000-1500,
1600-1800, 1890 Series
1955-70 IHC-Navistar BD308 Eng.
IHC Truck: A, AC-ACF, B100-BC100,
BC1890, BCF, CO180, F1700-1800, R170184, RC180, RF170, RF180, S100, S1840,
SC160-180, SF170-180, 173FC-183FC,
1600-1800, 1890 Series
IHC-Navistar RED 318, RED318A Eng.
IHC Light/Medium Duty Trucks
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L6
406ci/6.6L
4.375" Bore
V8
420ci/6.9L
4.000" Bore
V8
444ci/7.3L
4.1095" Bore
V8
445ci/7.3L
4.110" Bore
IHC Truck: C405L, CO190-200, CO201205, CO220-225, COF190-200, COT195,
F1900, F2000, FC402L-405L, LF190, R185225, R1850, RC190, RC200, RF190,
RF200, RT190, T1900, V196, 1850, 19002000 Series
1983-87 IHC-Navistar 6.9L D-421 Diesel Eng.
IHC Truck: 1654, 1753 Series
(Note: Intake seat above for late thickwall castings.)
1994-97
1988-95
1988-89
V8
446ci/7.3L
4.125" Bore
1975-81
Intake seat for early thin wall A & B
castings. See applications above.
IHC Navistar 7.3L TE 444 Diesel &
Turbo Diesel Direct Injection Eng.
IHC Truck: M1400, M1600, 1452SC,
1652SC, 1652UPS, 1654, 1654LP,
1753, 3700, 4600 Series
IHC Navistar 7.3L Diesel & Turbo Diesel
Indirect Injection Eng. IHC Truck: M1400,
M1600, 1452SC, 1652SC, 1652UPS,
1654, 1654LP, 1753, 3700, 4600 Series
(Note: Do not use intake seat above for
early year 1988-89 castings because
of thin wall sections.)
Intake seat for early thin wall castings,
IHC-Navistar MV446 Eng.
IHC Truck: C1710, CO1800,
F1700-1800, 1600-1800 Series
INT
EXH
INT
EXH
INT
31791
71791
(2375-1)
(2375-1N)
30682
70682
(1875-1)
(1875-1N)
30935
70935
(1937-23)
(1937-23N)
30868
70868
(1669E-1)
(1669E-1N)
31737
2.3800
2.000
.188
2.250
1.8810
1.625
.250
1.781
1.9430
1.688
.188
1.877
1.6690
1.372/1.429
.272
1.595 37º
1.8800
1.625
.188
1.877
1.7550
1.438
.250
1.680
1.7550
1.438
.250
1.680
1.9430
1.688
.188
1.877
1.6690
1.372/1.429
.272
1.595 37º
1.8800
1.625
.188
1.877
2.1300
1.812
.250
2.054
1.6544
1.367
.313
1.535
2.3800
2.000
.188
2.250
1.8810
1.625
.250
1.781
2.3800
2.000
.188
2.250
1.6300
1.313
.250
2.2555
1.938
.188 2.074 & 2.157
2.0060
1.625
.297
(1875-38)
INT
30656
(1750-4)
EXH
70656
(1750-4N)
INT
30935
(1937-23)
EXH
INT
30868
70868
(1669E-1)
(1669E-1N)
31737
(1875-38)
INT
30557
70557
(2125-1)
(2125-1N)
EXH
71696
(1654E-1N)
VALVE SEAT
L6
450ci/7.4L
4.375" Bore
V8
461ci/7.5L
4.125" Bore
1954-69 IHC-Navistar RD 450 Eng (after S/N
36670.) IHC Truck: C405L, CO190-200,
CO201-205, CO220-225, COF190-200,
COT195, F200, F1900, F2000, FC402L405L, KB11, L200, LF190, LF200, M412,
M613-623, M6123, M8324, MB623-6123,
R185-225, R1850, RC190, RC200, RF190,
RF200, RT190, T1900, 210-220-230,
1850, 1900-2000 Series
1960-74 IHC-Navistar RED450, RED450A,
RED450B, RED450D Eng (before S/N
36670.) IHC Truck: K10-11, KBR, KBS,
KS8-10-11, L200 Series
1960-64 IHC-Navistar V461, VS461,
UV461 (Power Unit) Eng.
IHC Truck & Power Unit: ACO, ACOF,
CO201-205, F200, M613-623, M6123,
M8324, MB623-6123, V190-195, V200,
VCO, VCOF, VF, VT195, 193RE,
210-220-230 Series
INT
EXH
70682
(1875-1N)
INT
31791
(2375-1)
EXH
70650
(1625-3N)
INT
EXH
220
31791
(2375-1)
30989
70989
(2250-1)
(2250-1N)
70726
(2000-3N)
1.805
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L6
466ci/7.6L
4.300" Bore
V8
478ci/7.8L
4.500" Bore
L6
501ci/8.2L
4.500" Bore
V8
537ci/8.8L
4.625" Bore
1975-83 IHC-Navistar D466, DT466, DT466B,
DTI 466B Diesel & Turbo Diesel Eng.
IHC Truck: CO1800, 1850A, CO1900,
1950B, F1853S, F1900, 1954S, F2000,
2050A, F-5000, 5050, 5050SF, 1850,
1854S, 1900-2000, 2050A, 2100-2500,
5000-5100 Series
1965-77 IHC-Navistar V478, VS478 Eng.
IHC Truck: CO1900, CO4000,
COF1810A, COF4010, COT4010, F200,
F1900, F2000, T1900, V190-195, V200,
VCO, VCOF, VF, VT195, 193RC, 193RE,
210-220-230, 1900-2000 Series
IHC Truck: C405L, CO190-200, CO220225, COF190-200, COT195, F200, F1900,
F2000, FC402L-405L, M613-623, M6123,
M8324, MB623-6123, R185-225, R1850,
RF190, RF200, RT190, T1900, 210220-230, 1900-2000 Series
IHC Truck: CO1900, F2000, 1900-2000
Series
INT
31756
2.0010
1.712
.385
1.970 30º
1.6285
1.348
.365
1.600
2.2555
1.938
.188 2.074 & 2.157
2.0060
1.625
.297
1.805
2.3800
2.000
.188
2.250
1.8810
1.625
.250
1.781
2.2555
1.938
.188
2.157
2.0060
1.625
.297
1.805
2.2555
1.938
.188 2.074 & 2.157
2.0060
1.625
.297
1.805
1.9730
1.658
.300
1.924
1.7750
1.458
.300
1.727
2.2555
1.938
.188
2.157
2.0060
1.625
.297
1.805
1.5690
1.180
.305
1.415
1.3195
1.060
.275
1.220
1.3170
1.046
.227
1.220
1.1940
0.934
.260
1.102
1.1940
0.934
.260
1.102
1.3820
1.000
.280
1.260
(2001E-1)
EXH
71681
(1628E-1N)
INT
30989
70989
(2250-1)
(2250-1N)
EXH
70726
(2000-3N)
INT
31791
(2375-1)
EXH
70682
(1875-1N)
INT
30989
70989
(2250-1)
(2250-1N)
EXH
70726
(2000-3N)
V8
549ci/9.0L
4.500" Bore
V8
551ci/9.0L
4.510" Bore
V8
605ci/9.9L
4.625" Bore
1970-79 IHC-Navistar V549, VS549, FTV549,
FTVS549 Eng. IHC Truck: ACO, ACOF,
CO1900, CO4000, COF1810A, COF4010,
COT4010, F200, F1900, F2000, M613-623,
M6123, M8324, MB623-6123, RF190, T1900,
V190-195, V196, V200, VCO, VCOF, VF,
VT195, 193RC, 193RE, 210-220-230,
1900-2000 Series
1980-83 IHC-Navistar D551 9.0L Diesel Eng.
IHC Truck: 1654, 1754, 1754S, 1853,
1853S, 1854, 1854S, 1950, 1950B, 1955,
1955S, CO1950B, D150-190, DV462,
DV462B, F1853S, F1954S Series
IHC-Navistar C605 Eng.
IHC. Truck: CO1900, F2000,
1900-2000 Series
INT
30989
70989
(2250-1)
(2250-1N)
EXH
70726
(2000-3N)
INT
31754
(1973E-1)
EXH
71721
(1775E-1N)
INT
30989
70989
(2250-1)
(2250-1N)
EXH
70726
(2000-3N)
31079
(1562-70)
EXH
1987-92 DOHC 16 valve 4XE1W, 4XE1WT (Turbo)
& RLX Eng. Isuzu Passenger Car:
I-Mark, Impulse, Stylus
1991-93 SOHC 12 valve Vin 6 4XE1, RLR Eng.
Isuzu Passenger Car: I-Mark, Impulse,
Stylus
INT
31628
71628
(1312-61)
(1312-61N)
30734
(1312-65)
EXH
INT
31050
71050
(1187-52)
(1187-52N)
31050
(1187-52)
EXH
31064
(1375-64)
221
VALVE SEAT
L4
1588cc/1.6L
3.15" (80mm) Bore
INT
1985-89 SOHC 4XC1, 4XC1T (Turbo) Eng.
Isuzu Passenger Car: I-Mark
ISUZU
L4
1471cc/1.5L
3.03" (77mm) Bore
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
ISUZU (CONT'D)
L4
1809cc/1.8L
3.15" (80mm) Bore
1992-93 DOHC 16 valve Vin 8 4XF1, FLX,
RLX Eng. Isuzu Passenger Car: Impulse,
Stylus
INT
30734
1.3170
1.046
.227
1.220
1.1940
0.934
.260
1.102
1.7570
1.323/1.490
.280
1.588
1.5050
1.215/1.275
.280
1.337
1.6320
1.305
.227
1.535
1.4445
1.100
.227
1.335
1.7570
1.323/1.490
.280
1.588
1.5050
1.215/1.275
.280
1.337
1.7570
1.323/1.490
.280
1.673
1.5050
1.215/1.275
.280
1.337
1.7570
1.323/1.490
.280
1.663
1.5695
1.265/1.320
.280
1.413
1.6320
1.333
.237
1.575
1.4445
1.095
.237
1.340
1.6320
1.333
.237
1.496
1.3820
1.057
.240
1.260
1.7570
1.323/1.490
.280
1.663
1.5695
1.265/1.320
.280
1.413
1.8195
1.530/1.710
.307
1.736
1.6320
1.329
.280
1.453
1.6320
1.333
.237
1.575
1.4445
1.095
.237
1.339
1.8195
1.530/1.710
.307
1.736
1.6320
1.329
.280
1.453
1.8180
1.563
.219
1.718
1.5050
1.250
.219
1.425
1.8180
1.563
.219
1.718
1.5050
1.250
.219
1.425
(1312-65)
EXH
31050
(1187-52)
L4
1817cc/1.8L
3.31" (84mm) Bore
INT
1981-85 SOHC G180Z Eng.
Isuzu Passenger Car: I-Mark, Pick-up
31467
(1750-62)
EXH
30015
(1500-50)
INT
1981-85 SOHC 4FB1 Diesel Eng.
Isuzu Passenger Car: I-Mark
31689
(1625-61)
EXH
31654
(1437-64)
L4
1949cc/1.9L
3.43" (87mm) Bore
1983-87 SOHC G200A, G200Z Carb. Eng.
Isuzu Passenger Car: Impulse, Pick-up,
Trooper II
INT
31467
(1750-62)
EXH
30015
(1500-50)
1983-87 SOHC G200Z Fuel Injection Eng.
Isuzu Passenger Car: Impulse, Pick-up,
Trooper II
INT
31467
(1750-51)
EXH
30015
(1500-50)
L4
1994cc/2.0L
3.46" (88mm) Bore
L4
2238cc/2.2L
3.46"(88mm) Bore
INT
1985-89 SOHC 4ZC1 Turbo Eng.
Isuzu Passenger Car: Impulse
31467
(1750-51)
EXH
1981-87 SOHC C223 Diesel Eng.
Isuzu Passenger Car: Pick-up, Trooper II
INT
31286
71286
(1562-66)
(1562-66N)
31690
(1625-55)
EXH
31653
(1437-58)
1986-87 SOHC C223T Vin Type U Turbo Diesel
Eng. Isuzu Passenger Car: Pick-up,
Trooper II
L4
2254cc/2.3L
3.52" (89.4mm) Bore
INT
EXH
INT
1986-95 SOHC 4ZD1 Carb. Eng.
Isuzu Passenger Car: Amigo,
Pick-up, Trooper II
31690
(1625-55)
31637
71637
(1375-63)
(1375-63N)
31467
(1750-51)
EXH
31286
(1562-66)
1988-95 SOHC 4ZD1 Fuel Injection Eng.
Isuzu Passenger Car: Amigo, Impulse,
Pick-up, Trooper II
INT
31239
(1812-51)
EXH
30860
VALVE SEAT
(1625-54)
L4
2369cc/2.4L
3.386" (86 mm) Bore
INT
1969-88 OHV C240 Diesel Eng.
Forklift and Industrial.
31690
(1625-55)
EXH
31653
(1437-58)
L4
2559cc/2.6L
3.64" (92.6mm) Bore
INT
1988-97 SOHC 4ZE1 Eng.
Isuzu Passenger Car: Amigo, Pick-up,
Rodeo, Trooper II
31239
(1812-51)
EXH
30860
(1625-54)
V6
173ci/2835cc/2.8L
3.503" (89mm) Bore
INT
1989-91 OHV LL2 GM Eng.
Isuzu Passenger Car: Trooper II
30667
(1812-4)
EXH
30711
(1500-1)
V6
189ci/3136cc/3.1L
3.503" (89mm) Bore
INT
1991-94 OHV CPC GM Eng.
Isuzu Passenger Car: Pick-up, Rodeo
30667
(1812-4)
EXH
30711
(1500-1)
222
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
ISUZU (CONT'D)
V6
3165cc/3.2L
3.677" (93.4mm) Bore
1992-97 SOHC 24 valve 6VD1 Eng.
Isuzu Passenger Car: Rodeo, Trooper
INT
31107
1.4433
1.059
.254
1.339
1.3190
1.020
.258
1.181
1.4433
1.059
.254
1.339
1.3190
1.020
.258
1.181
2.0060
1.750
.188
1.937
1.5680
1.312
.219
1.500
1.8820
1.505/1.689
.380
1.750
1.7570
1.385/1.559
.380
1.625
1.8820
1.505/1.689
.380
1.750
1.7570
1.385/1.559
.380
1.625
1.5050
1.215/1.275
.280
1.3820
1.000
.280
1.8820
1.505/1.689
.380
1.750
1.7570
1.385/1.559
.380
1.625
1.5050
1.215/1.275
.280
1.3820
1.000
.280
1.8820
1.505/1.689
.380
1.750
1.7570
1.385/1.559
.380
1.625
2.0060
1.625
.375
1.875
1.7570
1.385/1.559
.380
1.625
1.7570
1.410/1.560
.315
1.625
1.5070
1.220/1.339
.315
1.360
1.7570
1.410/1.560
.315
1.625
1.5695
1.200
.293
1.360
1.6929
1.339
.325
1.7570
1.410/1.560
.315
1.625
1.5695
1.200
.293
1.360
(1437-67)
EXH
31623
(1312-66)
1992-95 DOHC 24 valve 6VD1 Eng.
Isuzu Passenger Car: Rodeo, Trooper
INT
31107
(1437-67)
EXH
31623
(1312-66)
V6
262ci/4300cc/4.3L
INT
1996-99 OHV LB4, LB6 Vin W, X GM Eng.
Isuzu Passenger Car: Hombre
30690
(2000-36)
EXH
4.000" (89mm) Bore
30643
(1562-1)
JAGUAR (ALSO SEE FORD PASSENGER CARS)
L6
2483cc/2.5L
83mm Bore
INT
1959-69 DOHC Eng.
Jaguar Mark I, II, VII, VIII
30138
(1875-53)
EXH
30127
(1750-67)
L6
3442cc/3.4L
83mm Bore
INT
1960-69 DOHC Eng.
Jaguar Mark Series
30138
(1875-53)
EXH
30127
(1750-67)
L6
3590cc/3.6L
91mm Bore
INT
1987-89 DOHC 24 valve Eng.
Sovereign, Vanden Plas, XJ6, XJS
30015
(1500-50)
EXH
31064
(1375-64)
L6
3781cc/3.8L
87mm Bore
INT
1959-67 DOHC Eng.
IX, X, XKE, XK150, XK150S
30138
(1875-53)
EXH
30127
(1750-67)
L6
3980cc/4.0L
91mm Bore
INT
1990-95 DOHC 24 valve Eng.
Sovereign, Vanden Plas, XJ6, XJS
30015
(1500-50)
EXH
31064
(1375-64)
L6
4235cc/4.2L
92mm Bore
1964-79 DOHC Eng.
MK, Sovereign, Vanden Plas, XJ6, XJS,
XKE
INT
30138
(1875-53)
EXH
30127
(1750-67)
1980-87 DOHC Eng.
MK, Sovereign, Vanden Plas, XJ6, XKE
INT
30729
(2000-0)
EXH
30127
(1750-67)
30165
(1750-63)
EXH
30717
(1500-71)
INT
1982-92 SOHC V-12 Eng.
XJS, XJ12, XKE
30165
(1750-63)
EXH
31675
(1562-75)
EXH
Exhaust Seat for Late Model HE
31185
(1687-50)
V12
5994cc/6.0L
90mm Bore
INT
1994-96 SOHC V-12 Eng.
XJ12, XJS
EXH
223
30165
70165
(1750-63)
(1750-63N)
31675
71675
(1562-75)
(1562-75N)
VALVE SEAT
INT
1971-81 SOHC V-12 Eng.
XJS, XJ12, XKE
V12
5343cc/5.3L
90mm Bore
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
JEEP (SEE AMERICAN MOTORS & CHRYSLER)
JOHN DEERE
2 Cyl
53.9ci
3.250" Bore
2 Cyl
100.5 ci/ 1.6L
4.000" Bore
2 Cyl
113ci/1.9L
3.000" Bore
2 Cyl
113ci/1.9L
3.250" Bore
L4
115ci/1.9L
3.500" Bore
L3
135ci/2.2L
3.858" Bore
L4
145ci/2.4L
3.625" Bore
VALVE SEAT
L3, L4
152ci/2.5L
3.859" Bore
L4
162ci/2.6L
3.438" Bore
INT
1956-73 Series TF, TFD, TJD, TH, THD
Wisconsin Eng.
Baler: 14T, 24T, 24WS Series
31157
1.3810
1.125
.266
1.313
1.3810
1.125
.266
1.313
1.8180
1.500
.250
1.808
1.6300
1.375
.219
1.554
1.5050
1.250
.219
1.3800
1.125
.188
1.8180
1.500/1.625
.219
1.840
1.6300
1.375
.219
1.562
1.6920
1.438
.219
1.669
1.4425
1.188
.219
1.371
1.8180
1.563
.219
1.772
1.5680
1.312
.250
1.457
1.6920
1.438
.219
1.669
1.4425
1.188
.219
1.371
1.8810
1.625
.219
1.772
1.6920
1.375
.219
1.575
1.6300
1.375
.219
1.520
1.4425
1.188
.219
1.328
(1375-5)
EXH
1947-60 Series M, M40, 320, 330 John Deere
Eng. Crawler/Tractor: M, MC, MCT, MI,
MT, 40, 40C, 40M, 40T, 40U
INT
71157
(1375-5N)
30672
(1812-5)
EXH
INT
Series IXA, IXB Hercules Eng.
Combine: No. 6 (6-10" cut),
No. 7 (6-10" cut)
31157
(1375-5)
30648
70648
(1625-1)
(1625-1N)
30711
(1500-1)
EXH
INT
1956-60 113 Series John Deere Eng.
Crawler/Tractor: 420, 430, 430C,
440 Series
30790
70790
(1375-4)
(1375-4N)
30530
(1812-3)
EXH
1961-71 1010 Series 115, JD115 John Deere Gas
Eng.
Combne/Tractor:HA115G, 40, 1010 Series
Power Unit: EA115G, HB115, HB115G,
HB115GH, NA115G, 115, 600, 700 Series
3135 G Series John Deere Gas Eng.
incl. 1020, 2020, 2510,
Forklift: JD380
Loader: JD300,
JD300B, JD301A, JD303 Series
Crawler/Tractor: JD135G, JD180G,
JD300, JD301, JD350,
JD380, JD440, JD450, JD480 Series
Power Unit: 135 Series
1961-71 1010 Series John Deere Diesel Eng.
2010 Series John Deere Gas & LPG Eng.
Combine/Tractor: 45 Series
Power Unit: EA145G, EB145G, HA145,
HA145G, HB145, HB145G, HC145G,
HC145L, HD145G, 145 Series
1966-75 3152D Series John Deere Diesel Eng.
Forklift: JD380
Crawler/Loader/Tractor: JD300,
JD300B, JD301, JD301A, JD350, JD350C,
202, 301, 820, 830, 1020 Series
4 cyl Diesel applications: 2020, 2510, 880,
JD400, JD440, JD450, JD480, JD480A
F162 Series Continental Eng.
Combine: No. 8
Forage/Harvester: 8
INT
70648
(1625-1N)
30664
(1687-2)
EXH
INT
31030
71030
(1437-3)
(1437-3N)
30667
(1812-4)
EXH
INT
30644
70644
(1562-4)
(1562-4N)
30664
(1687-2)
EXH
INT
31030
71030
(1437-3)
(1437-3N)
30681
(1875-6)
EXH
INT
30677
70677
(1687-5)
(1687-5N)
30648
(1625-1)
EXH
224
30648
(1625-1)
31030
71030
(1437-3)
(1437-3N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
JOHN DEERE (CONT'D)
L3
164ci/2.7L
4.020" Bore
Crawler/Loader/Tractor: JD302, JD302A,
302, 1520, 1530, 2040 Series.
OEM sizes: Int. seat# R73064,
exh. seat# R51734
Replacement oversize seats for O.E.
sizes above
INT
31735
71735
(1858E-1)
(1858E-1N)
EXH
71694
1.8580
1.608
0.209
1.772 30º
1.6380
1.412
0.218
1.575
1.8810
1.625
.219
1.772
1.6920
1.375
.219
1.575
1.8180
1.563
.219
1.772
1.5680
1.312
.250
1.457
1.6920
1.438
.219
1.689
1.4425
1.188
.219
1.371
1.8580
1.608
0.209
(1638E-1N)
INT
30681
(1875-6)
EXH
70677
(1687-5N)
1966-75 3164 G Series John Deere Gas & LPG
Eng. Crawler/Loader/Tractor:
JD302, JD302A, 1520, 1530, 2040 Series
L4
165ci/2.7L
3.875" Bore
L3
179ci/2.9L
4.192" Bore
1961-71 HA165G Series John Deere Gas Eng.
HA165D-2010 Series John Deere Diesel
Eng. Combine/Tractor: 40, 45, 111 Series
Power Unit: HA165, HA165D, HA165G,
165 Series
1966-75 179D, 3179D Series John Deere Diesel &
179T, 3179T Series John Deere TurboDiesel Eng. Tractor: 2040, 2240 Series
exh. seat# R51734
Replacement oversize seats for O.E.sizes
above
INT
30667
(1812-4)
EXH
INT
30644
70644
(1562-4)
(1562-4N)
30664
(1687-2)
EXH
INT
31030
71030
(1437-3)
(1437-3N)
31735
71735
(1858E-1)
(1858E-1N)
EXH
71694
1.772 &
1.881 30º
1.6380
1.412
0.218
1.8810
1.625
.219
1.575
(1638E-1N)
INT
30681
(1875-6)
EXH
1.772 &
1.881 30º
70677
1.6920
1.375
.219
1.575
1.8180
1.563
.219
1.772
1.5680
1.312
.250
1.457
1.8180
1.563
.219
1.772
1.5680
1.312
.250
1.457
1.8800
1.562
.250
1.6300
1.375
.219
1.7550
1.500
.250
1.5160
1.250
.250
1.7550
1.500
.219
1.688
1.5680
1.312
.219
1.500
(1687-5N)
L4
180ci/2.9L
3.859" Bore
2 Cyl
190ci/3.1L
4.688" Bore
1966-75 4180G Series John Deere Gas Eng.
Forklift: JD480, JD480A Series
Crawler/Tractor: 2020, 2510, 2520, JD401,
JD401B, JD410, JD440, JD450, JD480 Series
Power Unit: EA180G, HA180G, 180GE-01
Series. Skidder: JD400, JD440 Series
Crawler/Tractor: JD450 Series
Windrower: 880 Series
1947-52 190 Series John Deere Gas &
LPG Eng. Tractor: B Series
after serial # 60000, 50 Series
INT
30667
(1812-4)
EXH
INT
30644
70644
(1562-4)
(1562-4N)
30667
(1812-4)
EXH
INT
30644
70644
(1562-4)
(1562-4N)
30509
(1875-2)
EXH
70648
(1625-1N)
INT
EXH
201, 301, 3010 Series John Deere Gas
& LPG Eng. Loader: 500C, 510 Series
Tractor: JD500, JD500A, JD500B, 3010
Series
225
INT
31760
71670
(1516E-1)
(1516E-1N)
30658
(1750-2)
EXH
30643
70643
(1562-1)
(1562-1N)
VALVE SEAT
L4
201ci/3.3L
4.000" Bore
30659
(1750-1)
1957-60 190 Series John Deere Gas & LPG
Eng.
Tractor: 520, 530, 620, 630 Series
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
JOHN DEERE (CONT'D)
L4
202ci/3.3L
3.859" Bore
L6
217ci/3.6L
3.625" Bore
VALVE SEAT
L4
219ci/3.6L
4.020" Bore
1966-75 4202 G Series John Deere Gas & LPG
Eng. 4202D Series Diesel Eng.
Combine: 45, 3300, 4400 Series
Forklift: JD 480A Series
Loader: JD401B, JD401C, JD410, 310A
Picker/Stripper: 499 Series. Power
Unit: EA202D, HB202G, 202DE-01,
202GH-01, 202, 202D, 202G Series
Tractor: JD400, JD401, JD401B, JD410,
JD440, JD450, JD480, 2020, 2030, 2510,
2520 Series
Windrower: 880, 2270, 2280 Series
217 Series John Deere Gas & LPG
Eng. Combine: 55, 55R, 65, 67R, 90,
95, 95H, 95R Series
Forage Harvester: 12 Series
Power Unit: EA217G, HA217G, HA217L,
HB217G, HB217L, HC217, HC217G,
HC217L, HD217, HE217G, HE217L, HG217G,
NA217G, NA217L, NB217G, NB217L,
TA217G, TA217L, TA217N, 217 Series
1966-75 4219G Series John Deere Gas & LPG
Eng. Combine: 45, 3300 Series
Loader: JD401B Series
Picker/Stripper: 499 Series
Power Unit: 219G, 219GH-01 Series
Skidder/Tractor: JD440, JD450, JD450B,
JD450C, JD480, JD480B, JD480C,
499, 2030, 2520 Series
1966-75 4219D, 4219T Series John Deere Diesel &
Turbo Diesel Eng. Combine: 3300,
4400 Series - Loader: JD310A, JD310B,
JD401B, JD401C, JD410 Series
Picker/Stripper: 499 Series
Power Unit: HA219D, HC219D, 219DE-01,
219DH-01, 219DH-02, 219DH-03,
219DN-01, 219D Series
Skidder/Tractor: JD440, JD440A, JD440B,
JD450, JD450B, JD450C, JD480, JD480B,
JD480C, 401, 499, 2030, 2440, 2520 Series
Windrower: 2270, 2280, 2340, 2420 Series
exh. seat# R51734
Replacement oversize seats for O.E. sizes
above
INT
30667
1.8180
1.563
.219
1.772
1.5680
1.312
.250
1.457
1.6920
1.438
.219
1.689
1.4425
1.188
.219
1.371
1.8180
1.563
.219
1.772
1.5680
1.312
.250
1.457
1.8580
1.608
0.209
(1812-4)
EXH
INT
30644
70644
(1562-4)
(1562-4N)
30664
(1687-2)
EXH
INT
31030
71030
(1437-3)
(1437-3N)
30667
(1812-4)
EXH
INT
30644
70644
(1562-4)
(1562-4N)
31735
71735
(1858E-1)
(1858E-1N)
EXH
71694
1.772 &
1.881 30º
1.6380
1.412
0.218
1.575
1.8810
1.625
.219
1.772
1.6920
1.375
.219
1.575
1.7550
1.500
.250
1.688
1.4425
1.219
.219
1.500
1.7550
1.500
.219
1.688
1.5680
1.312
.219
1.500
(1638E-1N)
INT
30681
(1875-6)
EXH
70677
(1687-5N)
L6
225ci/3.7L
3.400" Bore
L4
227ci/3.7L
4.250" Bore
INT
225 Series
Chrysler Industrial Eng.
Windrower: 800, 830, 2320 Series
30659
(1750-1)
EXH
INT
227, 3020 Series John Deere Gas
& LPG Eng.
Tractor: 3020 to serial # 123000,
JD510 Series
31031
71031
(1437-2)
(1437-2N)
30658
(1750-2)
EXH
70643
(1562-1N)
226
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
JOHN DEERE (CONT'D)
L6
230ci/3.8L
3.438" Bore
L4
239ci/3.9L
4.188" Bore
INT
QXD Series Hercules Eng.
Combine: 55, 55R, 65 Series
Power Unit: QXD-3
30672
1.8180
1.500
.250
1.5050
1.250
.219
1.8580
1.608
0.209
(1812-5)
EXH
1966-75 239D, 239T, 4039, 4239D, 4239T Series
John Deere Diesel & Turbo Diesel Eng.
exh. seat# R51734
above
INT
30711
70711
(1500-1)
(1500-1N)
31735
71735
(1858E-1)
(1858E-1N)
EXH
71694
1.772 &
1.881 30º
1.6380
1.412
0.218
1.575
1.8810
1.625
.219
1.772
1.6920
1.375
.219
1.575
1.7550
1.500
.219
1.688
1.5680
1.312
.219
1.500
1.6920
1.438
.219
1.689
1.4425
1.219
.219
1.371
1.6920
1.438
.219
1.689
1.4425
1.219
.219
1.371
1.8180
1.563
.219
1.777
1.6300
1.375
.219
1.590
1.9440
1.688
.250
1.902
1.7550
1.500
.250
1.715
1.8580
1.608
0.209
(1638E-1N)
INT
30681
(1875-6)
EXH
70677
(1687-5N)
L4
241ci/3.9L
4.125" Bore
L6
248ci/4.1L
3.875" Bore
L4
254ci/4.2L
4.125" Bore
L4
270ci/4.4L
4.250" Bore
L4
276ci/4.5L
4.190" Bore
241, 4241 Series John Deere Gas & LPG
Eng. Loader: 500C Series
Tractor: JD500 Series
30658
(1750-2)
EXH
INT
30643
70643
(1562-1)
(1562-1N)
30664
(1687-2)
EXH
INT
31031
71031
(1437-2)
(1437-2N)
30664
(1687-2)
EXH
71031
(1437-2N)
INT
30667
(1812-4)
EXH
70648
(1625-1N)
INT
30560
(1937-1)
EXH
70659
(1750-1N)
INT
31735
71735
(1858E-1)
(1858E-1N)
EXH
71694
1.772 &
1.881 30º
1.6380
1.412
0.218
1.575
1.8810
1.625
.219
1.772 &
1.6920
1.375
.219
1.575
1.7550
1.500
.250
1.6300
1.375
.219
1.6280
1.344
.250
1.588 30º
1.6280
1.344
.250
1.588 30º
(1638E-1N)
30681
(1875-6)
EXH
1.821
70677
(1687-5N)
L6
282ci/5.6L
3.750" Bore
L4
284ci/4.7L
4.250" Bore
JXC Series Hercules Eng.
Combine: No 17 (12-20" cut), No. 36
(12-20" cut), No. 36A (12-20" cut),
No. 36B (12-20" cut), 36H, 36P
Power Unit: JXC
4-71 Series Detroit Diesel Eng.,
2 valve head. Tractor: 8010
INT
30659
(1750-1)
EXH
70648
(1625-1N)
INT
EXH
31680
71680
(1628E-2)
(1628E-2N)
71680
(1628E-2N)
227
VALVE SEAT
INT
Eng.
Combine: 95, 95H, 105, 105R Series
Power Unit: BA248G, HA248G, HB248G,
HB248L, NA248G, 248, 248D Series
1961-71 248 Series John Deere Diesel Eng.
Combine: 55, 95, 95H Series
Power Unit: HA248D, HB248D, NA248D,
248, 248D Series
1961-63 254, 3010, 4254 Series John Deere
Diesel Eng. Loader: 500C, 510 Series
Power Unit: 4254D Series
Tractor: JD500A, 3010 Series
270, 3020, 4270 Series John Deere
Diesel Eng. Loader: JD500, JD500A,
JD500B, JD500C, JD510 Series
Power Unit: 4270D Series
1966-75 276D, 4276D, 4276T John Deere Diesel
& Turbo Diesel Eng.
Crawler: JD550 Series
Loader: 440C, 540B, 555, JD555 Series
Power Unit: 4276D, 4276T Series
Skidder/Tractor: 2630, 2640, JD440C,
JD540, JD540B, JD544B Series
exh. seat# R51734
above
INT
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
JOHN DEERE (CONT'D)
L4
284ci/4.7L
4.250" Bore
INT
4-71 Series Detroit Diesel Eng.,
4 valve head. Intake & Exhaust
Seat OE # 5101101. Tractor: 8010
31621
71621
(1262E-1)
(1262E-1N)
EXH
71621
1.2620
0.975
.250
1.180 30º
1.2620
0.975
.250
1.180 30º
1.7550
1.500
.219
1.688
1.5680
1.312
.219
1.500
1.8180
1.563
.219
1.772
1.5680
1.312
.250
1.457
1.8810
1.625
.219
1.772
1.6920
1.375
.219
1.575
1.8180
1.500
.250
1.808
1.6300
1.375
.219
1.554
1.8180
1.563
.219
1.772
1.5680
1.312
.250
1.457
1.8580
1.608
0.209
(1262E-1N)
L6
301ci/4.9L
4.000" Bore
L6
303ci/5.0L
3.860" Bore
2 Cyl
320ci/5.0L
5.500" Bore
VALVE SEAT
L6
329ci/5.4L
4.020" Bore
Eng. Combine: 105 Series
Tractor: JD600, JD644, JD690, 4000,
4010, 4020, 4230 Series
1966-75 6303G, 6303L Series John Deere
Gas & LPG Eng.
Combine: 55, 95H, 95LL, 6600 Series
Grader: JD570 Series
Harvester: 699 Series
Loader: JD440, JD450, JD544 Series
Power Unit: HA303G, HA303L, HB303G,
HB303L, HC303G, HD303G, HG303G,
NA303G, NA303L, 303 Series
Skidder/Tractor: JD540, 4030
Combine: 55, 95H, 95LL, 6600 Series
Grader: JD570, JD570A Series
Harvester: 699 Series
Loader: JD440, JD450, JD544 Series
Power Unit: HA303D, HB303D, HC303D,
NA303D, 303 Series
Skidder/Tractor: JD303A, JD540, 4030
Series
1947-60 320 Series John Deere Eng.
Tractor: A, M, 60, 320 Series
INT
30658
(1750-2)
EXH
INT
30643
70643
(1562-1)
(1562-1N)
30667
(1812-4)
EXH
INT
30644
70644
(1562-4)
(1562-4N)
30681
(1875-6)
EXH
70677
(1687-5N)
INT
EXH
1966-75 6329G, 6329L Series John Deere
INT
Gas & LPG Eng.
Combine: 4400, 6600 Grader: JD570
EXH
Harvester: 484, 499, 699
Loader: JD544 Picker: 428
Power Unit: HF329G, NB329G, NB329L,
329GH-01, 02, 329, 329GN-01, 329LN-01
1966-75 6329D, 6329T Series John Deere Diesel &
INT
Turbo Diesel Eng. Combine: 4400, 4420, 6600
Grader: JD570, JD570A Harvester: 484, 699 EXH
Loader: JD444C, JD544 Picker: 428
Power Unit: HC329D, NB329D, 329DH-01,
02, 329DN-03, 329
Skidder/Tractor: JD303A, JD540A, 2840
exh. seat# R51734
INT
above
30672
70672
(1812-5)
(1812-5N)
30648
70648
(1625-1)
(1625-1N)
30667
70667
(1812-4)
(1812-4N)
30644
70644
(1562-4)
(1562-4N)
31735
71735
(1858E-1)
(1858E-1N)
71694
1.772 &
1.881 30º
1.6380
1.412
0.218
1.575
1.8810
1.625
.219
1.772 &
1.6920
1.375
.219
1.575
1.7550
1.500
.219
1.688
1.5680
1.312
.219
1.500
(1638E-1N)
30681
70681
(1875-6)
(1875-6N)
EXH
70677
1.821
(1687-5N)
L6
340ci/5.6L
4.250" Bore
340, 341, 4020, 6340, 6341 Series John
Deere Gas & LPG Eng.
Combine: 105, 105R Series
Power Unit: HA341G, HG341G, 340, 341
Series. Tractor: JD600, 4020 Series
INT
(1750-2)
EXH
228
30658
30643
70643
(1562-1)
(1562-1N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
JOHN DEERE (CONT'D)
L6
359ci/5.9L
4.190" Bore
1966-75 359, 359T, 6359D, 6359T Series John Deere
Diesel & Turbo Diesel Eng. Tractor: 2940
Series. OEM sizes: Int. seat# R73064,
exh. seat# R51734
above
INT
31735
71735
(1858E-1)
(1858E-1N)
EXH
71694
1.8580
1.608
0.209
1.772 &
1.881 30º
1.6380
1.412
0.218
1.575
1.8810
1.625
.219
1.772 &
1.6920
1.375
.219
1.575
1.7550
1.500
.219
1.688
1.5680
1.312
.219
1.500
1.8180
1.563
.219
1.777
1.6300
1.375
.219
1.590
1.8180
1.563
.250
1.750
1.7550
1.500
.250
1.715
1.7550
1.500
.250
1.715
1.7550
1.500
.250
1.715
1.9440
1.688
.250
1.902
1.7550
1.500
.250
1.715
1.8180
1.563
.250
1.750
1.8580
1.608
0.209
(1638E-1N)
INT
30681
(1875-6)
EXH
1.821
70677
(1687-5N)
L6
362ci/5.9L
4.250" Bore
L6
381ci/6.2L
4.125" Bore
L6
404ci/6.6L
4.250" Bore
L6
414ci/6.8L
4.188" Bore
INT
30658
(1750-2)
EXH
INT
30643
70643
(1562-1)
(1562-1N)
30667
(1812-4)
EXH
70648
(1625-1N)
INT
30671
70671
(1812-1)
(1812-1N)
EXH
70659
(1750-1N)
INT
30659
70659
(1750-1)
(1750-1N)
EXH
70659
(1750-1N)
INT
30560
70560
(1937-1)
(19371N)
EXH
70659
(1750-1N)
INT
INT
30671
70671
(1812-1)
(1812-1N)
31735
71735
(1858E-1)
(1858E-1N)
EXH
71694
1.772 &
1.881 30º
1.6380
1.412
0.218
1.575
1.8810
1.625
.219
1.772 &
1.6920
1.375
.219
1.575
1.6280
1.344
.250
1.588 30º
1.6280
1.344
.250
1.588 30º
(1638E-1N)
30681
(1875-6)
EXH
1.821
70677
(1687-5N)
L6
426ci/7.0L
4.250" Bore
INT
6-71 Series Detroit Diesel Eng.
2 valve head.
Tractor: 800 Series
EXH
31680
71680
(1628E-2)
(1628E-2N)
71680
(1628E-2N)
229
VALVE SEAT
INT
362, 6362 Series John Deere Gas
& LPG Eng. Combine: 105, 105R,
6602, 6620, 6622, 7700, 7720 Series
Loader: JD600 Series
4010 Series John Deere Diesel Eng.
Tractor: JD600, JD644, JD690, 4010
Series
404D, 6404D Series John Deere Diesel
Eng. Harvester/Tractor: 4320, 4620
Series. 5200 & 7020 before
serial # 335845.
404D, 404T, 6404D, 6404T Diesel
& Turbo Diesel Eng.
Combine: 7700T (Turbo) Series
Harvester/Tractor: 4430, 4630 Series.
5200 & 7020 after serial # 335845.
404A, 404T, 6404A, 6404T Series
John Deere Turbo Diesel & Intercooled
Diesel Eng.
Combine: 105, 6602, 7700 Series
Loader/Tractor: 4000, 4020, 4040, 4230,
4520, JD600, JD644, JD644A, JD690,
JD690A Series
(For 4520 Series after serial # 245757,
and JD644, JD644A after serial # 24557
and JD690, JD690A after serial # 249299)
1966-75 414D, 6414D, 414T, 6414T Series John
Deere Diesel & Turbo Diesel Eng.
Crawler: JD750, JD755, JD755A Series
Grader/Loader: JD544B, JD544C, JD655,
JD670, JD670A, JD672A, JD755, 544C,
640, 655, 670, 672, 755 Series
Power Unit: 6414D, 6414T Series
Skidder/Tractor: G, JD640, 755A Series
exh. seat# R51734
above
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
JOHN DEERE (CONT'D)
L6
426ci/7.0L
4.250" Bore
6-71 Series Detroit Diesel Eng.
4 valve head., Intake & Exhaust
Seat OE#5101101 Tractor: 800 Series
INT
31621
71621
(1262E-1)
(1262E-1N)
EXH
71621
1.2620
0.975
.250
1.180 30º
1.2620
0.975
.250
1.180 30º
1.9430
1.688
.219
1.902
1.7550
1.500
.219
1.715
1.7550
1.500
.219
1.715
1.7550
1.500
.219
1.715
2.2560
1.875
.281
2.150
2.0060
1.750
.219
1.875
2.1360
1.705
.319
2.031
1.9910
1.616
.309
1.875
2.1360
1.705
.319
2.031
1.9910
1.616
.309
1.875
2.1300
1.875
.250
2.031
2.0060
1.750
.219
1.875
(1262E-1N)
L6
466ci/7.6L
4.563" Bore
L6
531ci/8.7L
4.750" Bore
L6
619ci/10.1L
5.125" Bore
1977-85 466, 6466D Series John Deere Diesel
Eng. Combine: 6602, 6620, 6622, 7720
Power Unit: 466, 466D, 6466D
Tractor: 890, 4050, 4240, 4250,
4440, 4450, 4650
1977-90 466A, 6466A, 466T, 6466T John Deere
Intercooled Diesel & Turbo Diesel Eng.
Buncher/Combine/Compactor: JD646C,
JD743A, 6602, 6620, 6622, 7720, 8430,
8450, 8820
Harvester: 5720 Loader: JD644C
Power Unit: 466A, 6466A, 466T, 6466T
Scraper/Skidder: JD740A, JD743, JD762A
Tractor: 790, 792, 890, 4050, 4250, 4440,
4450, 4640, 4650, 4840, 4850
531, 6531D John Deere Diesel Eng.
Power Unit: 6531D
Scraper: JD760, JD760A
Tractor: JD700, JD700A, 770A, 772A
531A, 6531A John Deere Intercooled
Turbo Diesel Eng.
Grader: JD770A, JD772A
Harvester: 5200, 5400
Loader: JD644C, J Power Unit: 6531A
Tractor: JD700, JD700A, JD760, JD760A
619, 6619A, 6619TA John Deere
Turbo & Intercooled Turbo Diesel Eng.
Crawler: JD850, Excavator: JD890
Grader: JD850, JD890 Harvester: 5440,
5640, 5820, 5822 Loader: JD855 Power
Unit: 6619A, 6619TA, Scraper: JD762, JD862
Tractor: 850, 6540, 6545, 8650
exh. seat# R48314
above
INT
30936
70936
(1937-17)
(1937-17N)
EXH
70658
(1750-2N)
INT
30658
70658
(1750-2)
(1750-2N)
EXH
70658
(1750-2N)
INT
31252
71252
(2250-2)
(2250-2N)
EXH
70691
(2000-1N)
INT
31781
71781
(2136E-1)
(2136E-1N)
EXH.
71755
(1991E-1N)
INT
31781
71781
(2136E-1)
(2136E-1N)
EXH
71755
(1991E-1N)
INT
EXH
30537
70537
(2125-2)
(2125-2N)
70691
VALVE SEAT
(2000-1N)
KAISER FRAZER (SEE AMC/CHRYSLER/JEEP)
KIA
KOMATSU (SEE CUMMINS)
LANCIA (SEE FIAT)
LANDROVER (SEE BMW / FORD)
LASER (SEE FORD)
230
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
LEMANS (SEE GENERAL MOTORS)
LEROI
1-4 Cyl
2-4 Cyl
2577, 2677, 2C, CM, CR, K, KP, M, MH,
MP, MR, R, RH, RP, RR, S, SH, SP, SR
Series
V, W, X, Y Series
EXH
only
INT
30672
1.8180
1.500
.250
1.5050
1.250
.219
1.5050
1.250
.219
1.5050
1.250
.219
1.5050
1.250
.219
1.5050
1.250
.219
1.5050
1.250
.219
2.1300
1.812
.250
2.1300
1.812
.250
1.4425
1.188
.219
1.4425
1.188
.219
1.8180
1.500
.250
1.6300
1.313
.250
1.8180
1.500
.250
1.6300
1.313
.250
1.8180
1.500
.250
1.6300
1.313
.250
1.8180
1.500
.250
1.5680
1.312
.219
1.6280
1.344
.250
1.588 30º
1.6280
1.344
.250
1.588 30º
1.2620
0.975
.250
1.180 30º
1.2620
0.975
.250
1.180 30º
1.6280
1.344
.250
1.588 30º
1.6280
1.344
.250
1.588 30º
1.2620
0.975
.250
1.180 30º
1.2620
0.975
.250
1.180 30º
(1812-5)
30711
(1500-1)
EXH
2 Cyl
45ci/0.8L
INT
1947-52 B45Series
INT
D91Series
INT
1954-56 A114 Series
L4
176ci/2.9L
3.750" Bore
L4
201ci/3.3L
4.000" Bore
L4
226ci/3.7L
4.000" Bore
L4
248ci/4.1L
3.875" Bore
70711
(1500-1N)
30711
30711
70711
(1500-1)
(1500-1N)
30557
INT
1943-54 D140 Series
30557
70557
(2125-1)
(2125-1N)
31030
(1437-3)
EXH
INT
1936-60 D176 Series
31030
71030
(1437-3)
(1437-3N)
30672
(1812-5)
EXH
INT
1936-60 D201 Series
30650
70650
(1625-3)
(1625-3N)
30672
(1812-5)
EXH
INT
1936-60 D226 Series
30650
70650
(1625-3)
(1625-3N)
30672
(1812-5)
EXH
INT
International (IHC) Diesel Eng.
UD-6 Series
30650
70650
(1625-3)
(1625-3N)
30672
(1812-5)
EXH
INT
70643
(1562-1N)
31680
71680
(1628E-2)
(1628E-2N)
EXH
71680
(1628E-2N)
INT
Detroit Diesel 4-71 series Eng.,
4 valve head. 365RD Series
Int. & Exh. Seat OE # 5101101
31621
71621
(1262E-1)
(1262E-1N)
EXH
71621
(1262E-1N)
L6
426ci/7.0L
4.250" Bore
Detroit Diesel 6-71 Series Eng.,
2 valve head. 600RD, 1200F Series
Int. & Exh. Seat OE# 5131096
INT
31680
71680
(1628E-2)
(1628E-2N)
EXH
71680
(1628E-2N)
Turbo 4 valve head. 600RD, 1200F
Series. Int. & Exh. seat OE # 5101101
INT
EXH
31621
71621
(1262E-1)
(1262E-1N)
71621
(1262E-1N)
231
VALVE SEAT
2 valve head. 365 RD Series
30643
(1562-1)
L4
284ci/4.7L
4.250" Bore
30711
(1500-1)
(2125-1)
EXH
L4
140ci/2.3L
3.500" Bore
30711
(1500-1)
EXH
1 Cyl
114ci/1.8L
70711
(1500-1N)
(1500-1)
EXH
L4
91ci/1.5L
30711
(1500-1)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
LEROI (CONT'D)
8 Cyl
540ci/8.9L
INT
1948-58 H540, TH540 Series
EXH
8 Cyl
570ci/9.3L
INT
1948-58 H570 Series
1.8800
1.562
.250
30652
70652
(1750-7)
(1750-7N)
1.7550
1.375
.219
30974
2.1300
1.875
.219
1.7550
1.500
.219
2.1300
1.875
.250
2.1300
1.875
.250
1.3807
1.121
.254
1.299
1.1945
0.935
.235
1.074
1.4445
1.150
.257
1.339
1.1945
0.935
.235
1.073
1.4445
1.150
.257
1.339
1.1945
0.935
.235 1.073 & 1.075
1.4445
1.150
.257
1.339
1.2559
.933
.254
1.142
1.4445
1.150
.257
1.319
1.2559
.933
.254
1.102
1.9430
1.563
.250
1.3190
1.062
.188
1.6300
1.375
.219
1.4425
1.188
.219
1.6300
1.375
.219
1.4425
1.188
.219
1.8810
1.625
.250
2.0060
1.625
.281
1.6920
1.375
.313
(2125-34)
EXH
8 Cyl
884ci/L
30509
(1875-2)
INT
H884, TH884 Series
30658
70658
(1750-2)
(1750-2N)
30537
(2125-2)
EXH
30537
70537
(2125-2)
(2125-2N)
LEXUS (ALSO SEE TOYOTA)
V6
2508cc/2.5L
3.445" (87.5mm) Bore
INT
1990-91 DOHC 2VZFE Toyota Eng.
Lexus Model ES250
31103
(1375-50)
EXH
31868
(1187-53)
V6
2958cc/3.0L
3.445" (87.5mm) Bore
INT
1992-97 40HC 24 valve 3VZFE Toyota Eng.
Lexus Model ES300
31659
(1437-72)
EXH
31868
(1187-53)
V6
2995cc/3.0L
3.45" (87.5mm) Bore
1994-99 DOHC 24 valve 1MZFE Aluminum Block
Toyota Eng. Lexus Model ES300
INT
31659
(1437-72)
EXH
31868
(1187-53)
L6
2997cc/3.0L
3.386" (86.1mm) Bore
V8
3969cc/4.0L
3.445" (87.5mm) Bore
1992-99 DOHC 24 valve 2JZGE & 2JZGTE Turbo
Toyota Eng. Lexus Model GS300,
SC300
INT
EXH
INT
1990-98 DOHC 32 valve 1UZFE Toyota Eng.
Lexus Model LS400, SC400
31659
(1437-72)
31105
71105
(1250-58)
(1250-58N)
31659
(1437-72)
EXH
31105
71105
(1250-58)
(1250-58N)
LINCOLN (SEE FORD PASSENGER CAR)
MACK TRUCK & BUS
VALVE SEAT
L6
L4
140ci/2.3L
L6
209ci/3.4L
3.188" Bore
EXH
only
EXH
only
INT
EJ Series Continental Eng.
MR140, MR209
1939-48 EN 11 Series Mack Eng.
70932
(1937-4N)
70775
(1312-1N)
30648
70648
(1625-1)
(1625-1N)
EXH
71030
(1437-3N)
L6
226ci/3.7L
3.313" Bore
INT
1939-48 EN12 Series Mack Eng.
30648
70648
(1625-1)
(1625-1N)
EXH
71030
(1437-3N)
L6
228ci/3.7L
L6
253ci/4.1L
3.500" Bore
EXH
only
INT
MR228 Series Mack Eng.
Mack Truck/Bus Models: FO Series
EXH
70682
(1875-1N)
30725
70725
(2000-6)
(2000-6N)
70679
(1687-8N)
232
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
MACK TRUCK & BUS (CONT'D)
L6
268ci/4.4L
L6
270ci/4.4L
3.625" Bore
MR268 Series Continental Eng.
1938-50 EN270, EN271 Series Mack Eng.
Mack Truck/Bus Models: FM Series
EXH
only
INT
70932
1.9430
1.563
.250
2.0060
1.625
.281
1.6920
1.375
.313
2.0060
1.625
.281
1.6920
1.375
.313
2.0060
1.625
.281
1.6920
1.375
.313
2.3820
2.000
.281
1.7550
1.500
.250
2.4440
2.046
.299
2.245 30º
2.0880
1.692
.299
1.889 30º
1.8315
1.555
.280
1.694 30º
1.6925
1.430
.248
1.573 30º
2.4440
2.046
.299
2.245 30º
2.0880
1.692
.299
1.889 30º
1.8315
1.555
.280
1.694 30º
1.6925
1.430
.248
1.573 30º
(1937-4N)
30725
70725
(2000-6)
(2000-6N)
EXH
70679
(1687-8N)
L6
290ci/4.8L
3.750" Bore
INT
Mack Truck/Bus Models:
FK, FKC Series
30725
70725
(2000-6)
(2000-6N)
EXH
70679
(1687-8N)
L6
330ci/5.4L
4.000" Bore
INT
30725
70725
(2000-6)
(2000-6N)
EXH
70679
(1687-8N)
V8
413ci/6.7L
4.188" Bore
Chrysler M413 Series Industrial Eng.
EN414 Series Mack Truck
INT
30994
70994
(2375-2)
(2375-2N)
EXH
70659
(1750-1N)
L6
672ci/11.0L
4.875" Bore
1953-73 Mack Diesel Eng. w 4.875" Bore: E31,
E6-4V, E7-4V, E6315, E6315R, E6350,
E6350R, EM6, EM6250,EM6275R,
EM6285, EM6285R, EME6285R,
EM6300R, EN672, END673, END673A,
END673B, END673C, END673D, END673E,
END673P, END673T, ENDLT673,
ENDLT673A, ENDLT673B, ENDLT673C,
ENDT673, ENDT673A, ENDT673B,
ENDT673C, ENDTF673C, ET673,
ETA673, ET675, ETZ675, ETZB675,
EN676, ENDT676, ENDT675, ENDTB676
Maxidyne Diesel, ETAY676, ETSZ676
Mack Truck Models: B, C, DM, F, G, H,
LJ, LR, MB, MC, MR, N, R, RD, RL,
RM, RS, RW, U, W Series
Above applications w 2 valve Cyl. head
INT
EXH
INT
EXH
INT
EXH
INT
EXH
233
31771
71771
(2088E-1)
(2088E-1N)
31731
71731
(1831E-1)
(1831E-1N)
31869
71869
(1692E-1)
(1692E-1N)
31792
71792
(2444E-1)
(2444E-1N)
31771
71771
(2088E-1)
(2088E-1N)
31731
71731
(1831E-1)
(1831E-1N)
31869
71869
(1692E-1)
(1692E-1N)
VALVE SEAT
1953-73 Mack Diesel Eng. w 5.000" Bore:
EN707, EN707A, EN707B, EN707C,
END707, ENF707A, ENF707C, END711,
END711C, ENDD711, ENDDL711,
ENDL707, ENDLT711, ENDT711
Mack Truck Models: B, C, F, R, TD, U
Series
71792
(2444E-1N)
L6
707ci/11.6L
5.000" Bore
31792
(2444E-1)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
MACK TRUCK & BUS (CONT'D)
V8
864ci/14.2L
5.000" Bore
1953-73 Mack Diesel Eng. w 5.000" Bore
EN864, END864, END864A, END864B,
END864C, ENDD864, ENDD864C,
ENDT864, ENDT864C, ENVD864,
ENVDT864
Mack Truck Models: D, F, R, RD, RS, W
Series
INT
EXH
INT
EXH
31792
71792
(2444E-1)
(2444E-1N)
31771
71771
(2088E-1)
(2088E-1N)
31731
71731
(1831E-1)
(1831E-1N)
31869
71869
(1692E-1)
(1692E-1N)
2.4440
2.046
.299
2.245 30º
2.0880
1.692
.299
1.889 30º
1.8315
1.555
.280
1.694 30º
1.6925
1.430
.248
1.573 30º
1.5695
1.246
.230
1.415
1.3820
1.022
.230
1.220
1.5695
1.246
.230
1.415
1.3820
1.022
.230
1.220
1.5695
1.246
.230
1.415
1.3820
1.022
.230
1.220
1.7570
1.410/1.560
.315
1.656
1.5050
1.100/1.225
.316
1.297
1.6310
1.320
.300
1.476
1.4445
1.120
.300
1.259
1.2570
0.976
.180
1.161/1.220
1.0690
0.790
.260
.927/1.031
1.7570
1.410/1.560
.315
1.656
1.5050
1.100/1.225
.316
1.297
1.7570
1.410/1.560
.315
1.656
1.5050
1.100/1.225
.316
1.297
1.2560
1.000
.219
1.181
1.1320
0.830
.240
.984
MASSEY FERGUSON (IDENTIFY ENGINE
USED & REFER TO ENGINE LISTING)
MAZDA (ALSO SEE FORD)
L4
1272cc/1.3L
2.874" (73mm) Bore
INT
1976-78 SOHC TC Series Mazda Eng.
GLC, Mizer, 808 Mizer
31676
(1562-57)
EXH
31636
(1375-54)
L4
1415cc/1.4L
3.031" (77mm) Bore
INT
1979-80 SOHC UC Series Mazda Eng.
GLC
31676
(1562-57)
EXH
31636
(1375-54)
L4
1490cc/1.5L
3.03" (77mm) Bore
1981-86 SOHC CE15, E5, E15 Series Mazda
Eng. GLC
SOHC D5 Mazda Eng. Forklift & Industrial
INT
31676
(1562-57)
EXH
31636
(1375-54)
L4
1586cc/1.6L
3.071" (78mm) Bore
INT
1970-77 SOHC NA Series Mazda Eng.
616, 808. Mazda Truck: B1600
30165
(1750-63)
EXH
30045
(1500-57)
L4
1597cc/1.6L
3.07" (78mm) Bore
1986-94 SOHC 8 valve B6, B6A, B6B, B6E, B61,
CE16 Series Mazda Eng. 323
INT
31223
(1625-62)
EXH
31647
VALVE SEAT
(1437-66)
L4
1769cc/1.8L
3.150" (80mm) Bore
INT
1988-95 DOHC 16 valve Turbo B6, B6B, B6C,
B61, CE16 Series Mazda Eng. Miata,
MX3, MX5, MX5 Miata, 323,
323 GTX Turbo
1978-80 SOHC VC Series Mazda Eng.
Mazda Passenger Car & Truck
EXH
INT
31614
71614
(1250-61)
(1250-61N)
31047
71047
(1062-50)
(1062-50N)
30165
(1750-63)
EXH
30045
(1500-57)
L4
1796cc/1.8L
3.07" (78mm) Bore
INT
1971-78 SOHC VB Series Mazda Eng.
618, 626; Mazda Truck: B-1800
30165
(1750-63)
EXH
30045
(1500-57)
L4
1839cc/1.8L
3.27" (83mm) Bore
1990-94 SOHC 16 valve BP, BPE, BP012 Series
Mazda Eng. w E.F.I.
Protege DX, SE, LX & 4WD
INT
31147
(1250-1)
EXH
31603
(1125-55)
234
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
MAZDA (CONT'D)
1990-99 DOHC 16 valve BP, BP05, BP06 Series
Mazda Eng. Protege LX, Miata
INT
31650
1.4445
1.162
.230
1.298
1.2570
0.905/1.000
.230
1.103
1.7570
1.410/1.560
.315
1.656
1.5050
1.100/1.225
.316
1.297
1.6300
1.375
.250
1.3810
1.188
.219
1.8195
1.490/1.628
.307
1.732
1.5070
1.180/1.318
.305
1.417
1.6940
1.335
.275
1.614
1.5070
1.182
.275
1.417
1.8195
1.490/1.628
.307
1.732
1.5070
1.180/1.318
.305
1.417
1.3820
1.102/1.160
.260
1.280
1.4445
1.175
.260
1.339
1.8180
1.500
.219
1.735
1.5680
1.313
.188
1.500
1.8180
1.500
.219
1.735
1.5680
1.313
.188
1.500
1.8820
1.575/1.692
.317
1.811
1.6310
1.298
.317
1.496
1.4445
1.162
.230
1.312
1.5070
1.239
.225
1.417
1.4445
1.120
.300
1.299
1.6320
1.320
.300
1.496
1.4445
1.175
.260
1.366
1.3190
.975
.280
1.217
1.7550
1.500
.219
1.661
1.4425
1.219
.219
1.371
(1437-74)
EXH
30230
(1250-56)
L4
1970cc/2.0L
3.150" (80mm) Bore
INT
1978-84 SOHC MA Series Mazda Eng.
626. Mazda Truck: B2000
30165
(1750-63)
EXH
30045
(1500-57)
L4
1985cc/2.0L
(82mm) Bore
INT
1971-79 OHV VA Series Mazda Eng.
Forklift and Industrial
30646
(1625-2)
EXH
31248
(1375-22)
L4
1998cc/2.0L
3.39" (86mm) Bore
1983-87 SOHC CE20, FE Series w Carb.
and F.I. incl. Turbo FE (86-87) Mazda
Eng. 626. Mazda Truck: B2000
1984-85 SOHC RF, RF20 Series Mazda Diesel
Eng. 626 Diesel
INT
31237
(1812-50)
EXH
INT
30031
70031
(1500-54)
(1500-54N)
31705
(1687-57)
EXH
31668
(1500-72)
L4
2184cc/2.2L
3.39" (86mm) Bore
1987-93 SOHC 8 valve CE22 Mazda Eng.,
F2G, F2L Series w Carb. and F.I. (90-93)
Mazda Truck: B2200
INT
31237
(1812-50)
EXH
30031
(1500-54)
1988-92 SOHC 12 valve 12B, 34D, 35D, F28, F29
incl. Turbo Series Mazda Eng.
MX-6, 626
L4
2255ci/2.3L
3.16" (80.3mm) Bore
INT
EXH
INT
1994-96 SOHC Ford Eng.
30238
(1375-56)
31651
71651
(1437-75)
(1437-75N)
30668
(1812-2)
EXH
30840
(1562-36)
L4
2302ci/2.3L
3.779" (96 mm) Bore
INT
1994-97 SOHC Ford A, 8A Series Eng.
Mazda Truck: B2300
30668
(1812-2)
EXH
30840
(1562-36)
L4
2555ci/2.6L
3.59" (91.1mm) Bore
1987-89 SOHC AM1, CE26, G54B Series
Mitsubishi Eng. Mazda Truck: B2600
INT
31034
(1875-51)
EXH
31218
(1625-56)
1989-95 SOHC 12 valve G6, G6E, G60 Series
incl. G61, G62, G64 Mazda Eng. MPV.
Mazda Truck: B2600, B2600i, MPV Van
INT
31650
(1437-74)
EXH
30204
V6
2954cc/3.0L
3.54" (90mm) Bore
1988-98 SOHC 18 valve CE, CE30, JE, JE30,
JE39, JEE Series Mazda Eng. 929, 929S,
MPV. Mazda Truck: MPV Van
INT
31647
(1437-66)
EXH
31223
(1625-62)
1990-96 DOHC 24 valve JE27, JE48, JE74, JED4
Series Mazda Eng. 929, 929S,
Mazda Truck: MPV Van
INT
31651
(1437-75)
EXH
31058
(1312-68)
V6
2994ci/3.0L
3.503" (89mm) Bore
INT
1994-99 OHV Ford U Series Vulcan Eng.
Mazda Passenger Car, Truck
Mazda Truck: B3000
30658
(1750-2)
EXH
31031
(1437-2)
235
VALVE SEAT
(1500-80)
L4
2606cc/2.6L
3.62" (92 mm) Bore
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
MAZDA (CONT'D)
V6
4016cc/4.0L
3.95" (100mm) Bore
INT
1990-98 OHV VGE4 Series Ford (German)
V Series Eng incl. 8X, ZZL.
Mazda Truck: Navajo, B4000
31238
1.8810
1.563
.219
1.713
1.4425
1.219
.219
1.358
1.5685
1.255/1.372
.319
1.425
1.4425
1.105
.322
1.230
1.5070
1.215
.310
1.3820
1.063
.253
30129
1.7570
1.460/1.553
.425
1.613
30853
1.6300
1.250
.375
1.455
1.8820
1.625
.352
1.780
1.6320
1.335
.420
1.461
1.8820
1.625
.352
1.780
1.6320
1.335
.420
1.461
1.8195
1.590
.450
1.740
1.6320
1.335
.420
1.461
1.8195
1.590
.450
1.740
1.6320
1.335
.420
1.460
1.6320
1.335
.420
1.539
1.6320
1.335
.420
1.460
1.8195
1.590
.450
1.740
1.6320
1.335
.420
1.461
1.6920
1.438
.219
1.4961
1.142
.354
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.219
1.500
(1875-19)
EXH
31031
(1437-2)
MERCEDES BENZ
L4
1988cc/2.0L
87mm Bore
INT
1958-67 OM621 Series Diesel Eng.
Mercedes Benz Passenger Car:
180D, 190D, 200D, OM621 Series
31199
(1562-67)
EXH
30806
(1437-65)
L4
1993cc/2.0L
L6
2496cc/2.5L
82mm Bore
L6
2746cc/2.8L
86mm Bore
1951-67 M-180 Series Eng.
Mercedes Benz Passenger Car: 220A,
220B, 220S, 220SB, 220SE, 220SEB,
230SL
1965-73 SOHC 230, 250, 280 Series Gas Eng.
Mercedes Benz Passenger Car: 230B,
230S, 250S, 250SE, 250SL, 250B,
280S, 280SE, 280SL
1973-80 DOHC M110 Series Gas Eng.
Mercedes Benz Passenger Car: 280C,
280CE, 280, 280SE
INT
30716
(1500-62)
EXH
31062
(1375-50)
INT
EXH
(1625-29)
INT
31742
(1875-55)
EXH
31691
(1625-64)
INT
1968-81 DOHC M220.921, 922, 984, 985 Gas
Eng. Mercedes Benz Passenger Car:
280C, 280CE, 280E, 280SE
31742
(1875-55)
EXH
31691
(1625-64)
8 Cyl
3499cc3.5L
92mm Bore
INT
1969-71 SOHC M116.980, 981 Gas Eng.
280SE, 300SEL
31730
(1812-60)
EXH
31691
(1625-64)
V8
3839cc/3.8L
88mm Bore
1981-85 SOHC M116.960, 961 Series Eng.
380SE, 380SEC, 380SEL, 380SL,
380SLC
1981-85 SOHC M116.963 Series Eng.
380SE, 380SEC, 380SEL, 380SL, 380SCL
INT
31730
(1812-60)
EXH
31691
(1625-64)
INT
31691
(1625-64)
EXH
31691
(1625-64)
VALVE SEAT
V8
4520cc/4.5L
92mm Bore
L6
1972-80 SOHC M117.982, 983, 985, 986 Series
Eng. Mercedes Benz Passenger Car:
250, 250SL, 280SL, 450SE, 450 SEL,
450SL, 450SCL
OM321 Series Eng.
INT
31730
(1812-60)
EXH
31691
(1625-64)
INT
30664
(1687-2)
EXH
31178
(1496E-1)
MERCURY (SEE FORD PASSENGER CAR)
MERCURY MARINE / MERCRUISER
L4
153ci/2.5L
3.875" Bore
INT
Mercury Marine 110 Series 153ci GM
Eng. Serial #1537370 Up
30530
(1812-3)
EXH
236
30541
70541
(1562-9)
(1562-9N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
MERCURY MARINE / MERCRUISER (CONT'D)
L4
153ci/2.5L
3.875" Bore
L4
181ci/3.0L
4.000" Bore
L4
224ci/3.7L
4.36" (111mm) Bore
L6
230ci/3.8L
3.875" Bore
L6
250ci/4.1L
3.875" Bore
Mercruiser 120 Series 153ci GM Eng.
Serial #1666601 Up
INT
EXH
Mercruiser 140 Series 181ci GM Eng.
Serial #1666601 Up
INT
INT
EXH
Mercruiser 150 Series 230ci Chevrolet
Eng. Serial # 1666495 Up
INT
EXH
Eng.
INT
INT
30541
70541
(1562-9)
(1562-9N)
1.5680
1.312/1.390
.219
1.500
31240
2.1310
1.813
.219
1.940
30664
70664
(1687-2)
(1687-2N)
1.6920
1.438
.219
1.600
30989
2.2555
1.938
.188
2.083
Eng.
INT
INT
1.7550
1.500
.219
1.654
INT
1.8180
1.500/1.625
.219
1.720
INT
70541
(1562-9N)
1.5680
1.312/1.390
.219
1.500
30530
1.8180
1.500/1.625
.219
1.720
30541
70541
(1562-9)
(1562-9N)
1.5680
1.312/1.390
.219
1.500
30530
1.8180
1.500/1.625
.219
1.720
30541
70541
(1562-9)
(1562-9N)
1.5680
1.312/1.390
.219
1.500
30530
1.8180
1.500/1.625
.219
1.720
30541
70541
(1562-9)
(1562-9N)
1.5680
1.312/1.390
.219
1.500
30530
1.8180
1.500/1.625
.219
1.720
30541
70541
(1562-9)
(1562-9N)
1.5680
1.312/1.390
.219
1.500
30530
1.8180
1.500/1.625
.219
1.720
30541
70541
(1562-9)
(1562-9N)
1.5680
1.312/1.390
.219
1.500
30530
1.8180
1.500/1.625
.219
1.782
1.5680
1.312
.219
1.460
1.6300
1.375
.219
1.541
1.9420
1.688
.219
1.840
1.5680
1.312/1.390
.219
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312
.219
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312
.219
1.500
2.0050
1.813
.219
1.940
1.5680
1.312
.219
1.500
(1812-3)
EXH
30643
70643
(1562-1)
(1562-1N)
30648
70648
(1625-1)
(1625-1N)
30936
EXH
30541
70541
(1562-9)
(1562-9N)
30530
(1812-3)
EXH
V8
350ci/5.7L
4.000" Bore
Mercruiser 250-255 Series 350ci
Chevrolet Eng. 250 Series # 4768000 Up;
255 Series # 4175500 Up
INT
70643
(1562-1N)
30530
(1812-3)
EXH
INT
30643
(1562-1)
30541
70541
(1562-9)
(1562-9N)
30952
(2000-7)
237
EXH
30643
70643
(1562-1)
(1562-1N)
VALVE SEAT
(1937-17)
INT
INT
228 Series, Serial # 4765100 Up
30541
(1562-9)
(1812-3)
EXH
Replacement universal oversize exh.
Seat
Eng. 228 Series before
Serial # 4765100
30530
(1812-3)
EXH
Mercruiser 888 Series 302ci Ford Eng.
Serial # 3108723 Up
70658
(1750-2N)
(1812-3)
EXH
Eng.
30658
(1750-2)
(1812-3)
EXH
V8
305ci/5.0L
3.736" Bore
1.720
(1812-3)
EXH
V8
302ci/4.9L
4.000" Bore
.219
(1812-3)
EXH
V8
302ci/4.9L
4.000" Bore
1.500/1.625
(2250-1)
V8
283ci/4.6L
3.875" Bore
1.8180
(2125-31)
EXH
Mercruiser 470 Series 224ci Eng.
Serial # 4208730 Up
30530
(1812-3)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
MERCURY MARINE / MERCRUISER (CONT'D)
V8
351ci/5.7L
4.000" Bore
V8
454ci/7.4L
4.250" Bore
Mercruiser 255 Series 351ci Ford Eng.
Serial # 3258728-4175499
INT
EXH
Intake Seat OE # B7743
Replacement universal oversize exh.
Seat
30936
1.9420
1.688
.219
1.840
1.6300
1.375
.219
1.541
2.3175
2.000
.250
2.190
1.8180
1.500/1.625
.219
1.720
1.8180
1.563
.219
1.881
1.4425
1.188
.219
1.310
1.2560
1.000
.219
1.152
1.5680
1.250
.250
1.5050
1.188
.250
1.5050
1.250
.250
1.438
31052
1.2550
1.055
.250
1.233
30645
1.5680
1.250
.250
1.5050
1.188
.250
1.6920
1.438
.250
1.564
1.4440
1.188
.250
1.348
1.7550
1.500
.250
1.627
1.4440
1.188
.250
1.348
1.3810
1.125
.266
1.313
1.3810
1.125
.266
1.313
1.3800
1.150/1.170
.265
1.313
1.3800
1.150/1.170
.265
1.313
1.3800
1.150/1.170
.265
1.313
1.3800
1.150/1.170
.265
1.313
1.5050
1.250
.219
1.3800
1.125
.188
(1937-17)
INT
30648
70648
(1625-1)
(1625-1N)
31261
(2250-35)
EXH
EXH
30530
70530
(1812-3)
(1812-3N)
30726
70726
(2000-3)
(2000-3N)
M.G. (INCLUDES BRITISH MOTOR CARS)
L4
1275cc/1.3L
70.5mm Bore
1967-75 OHV Morris Eng.
Austin, Austin Healy Sprite, MG Midget,
1300
INT
31030
(1437-3)
EXH
31147
(1250-1)
L4
1489cc.1.5L
73mm Bore
INT
MG Magnette 2A, 2B; MGA
30645
(1562-7)
EXH
30822
(1500-6)
L4
1493cc/1.5L
73.6mm Bore
MG Midget Mk III
L4
1588cc/1.6L
75.4mm Bore
MGA 1600 Mk I
INT
30712
(1500-3)
EXH
INT
(1562-7)
EXH
30822
(1500-6)
L4
1798cc/1.8L
80.2mm Bore
INT
1800 MGB, MGB-GT
30673
(1687-3)
EXH
31161
(1437-5)
INT
1800 MGB, MGB-GT
30659
(1750-1)
EXH
31161
(1437-5)
MINNEAPOLIS-MOLINE
VALVE SEAT
2 Cyl
53.9ci
3.250" Bore
L4
91.9ci/1.5L
3.000" Bore
L4
108ci/1.8L
3.250" Bore
L4
113ci/1.9L
3.000" Bore
INT
TFD Series Wisconsin Eng.
Baler
31157
(1375-5)
EXH
INT
VE4 Series Wisconsin Eng.
Combine/Tractor: 69
31157
71157
(1375-5)
(1375-5N)
31157
(1375-5)
EXH
VF-4, VH-4D Series Wisconsin Eng.
Baler: K3, K4 Combine: 69 Forklift:
MSA Series Tractor: K3 Windrower: 100
INT
71157
(1375-5N)
31157
(1375-5)
EXH
INT
IXB Series Hercules Eng.
Combine: J
31157
(1375-5)
31157
71157
(1375-5)
(1375-5N)
30711
(1500-1)
EXH
238
30790
70790
(1375-4)
(1375-4N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
MINNEAPOLIS-MOLINE (CONT'D)
L4
132.7ci/2.2L
3.250" Bore
L4
133ci/2.2L
3.250" Bore
L4
162ci/2.6L
3.438" Bore
L4
165ci/2.7L
3.625" Bore
L4
186ci/3.0L
3.625" Bore
L4
206ci/3.4L
3.625" Bore
INT
VG-4D Series Wisconsin Eng.
Combine: G12
Windrower: 100
EXH
INT
IXB, IXB-3 Series Hercules Eng.
Tractor: A, A-21, BF, BFH, BFS,
BFW, BG
L6
226ci/3.7L
3.312" Bore
1.150/1.170
.265
1.313
31157
71157
(1375-5)
(1375-5N)
1.3800
1.150/1.170
.265
1.313
30711
1.5050
1.250
.219
EXH
F-162 Series Continental Eng. includes
Tractor: MA30, MA40, MA50,
MF Super 90
1939-57 RE Series Minneapolis-Moline Diesel Eng.
Combine: G4, S24
Tractor: R, RN, RT, RTE, RTI, RTN, RTS,
RTU, Z, ZN, ZT, ZTE, ZTI, ZTN, ZTS, ZTU
INT
1939-57 RE Series Minneapolis-Moline Diesel Eng.
Combine: G4, S24
Tractor: R, RN, RT, RTE, RTI, RTN, RTS,
RTU, Z, ZN, ZT, ZTE, ZTI, ZTN, ZTS, ZTU
1940-54 206 Series Minneapolis-Moline Diesel
Eng. Tractor: 206A, 3 Star, 4 Star,
4 Star Super, 445 Jet Star; R &L Series
INT
220-4, 220-4A, 220-A, 220-A4 Series
Gas, LPG, Propane, Natural Gas
Minneapolis-Moline Eng.
F-226 Series Continental Eng. includes
LPG, Propane, Natrual Gas
Combine: S, SP168, SPR168, SR570
Tractor: S, SR
JX4LD-ER Series Hercules Eng.
Combine: A, 16-20
30790
70790
(1375-4)
(1375-4N)
1.3800
1.125
.188
30648
1.6300
1.375
.219
1.520
1.4425
1.219
.219
1.328
1.5680
1.250
.219
(1625-1)
EXH
71031
(1437-2N)
INT
EXH
EXH
INT
EXH
INT
EXH
INT
30640
70640
(1562-6)
(1562-6N)
31870
71870
(1562-16)
(1562-16N)
1.5670
1.250
.188
30640
70640
1.5680
1.250
.219
(1562-6)
(1562-6N)
1.5670
1.250
.188
1.5680
1.250
.219
1.5680
1.250
.219
1.5680
1.250
.219
1.4425
1.188
.156
1.5050
1.250
.219
1.4425
1.188
.156
1.5680
1.250
.219
1.4425
1.188
.156
1.6300
1.375
.219
1.515
1.4425
1.219
.219
1.328
1.7550
1.500
.250
1.6300
1.375
.219
1.6300
1.375
.219
1.515
1.3480
1.087
.200
1.203
1.3800
1.125
.219
1.203
1.8180
1.563
.250
1.718
1.6300
1.375
.250
1.501
31870
71870
(1562-16)
(1562-16N)
30640
70640
(1562-6)
(1562-6N)
30640
70640
(1562-6)
(1562-6N)
30640
70640
(1562-6)
(1562-6N)
31642
71642
(1437-13)
(1437-13N)
30711
(1500-1)
EXH
INT
EXH
INT
31642
71642
(1437-13)
(1437-13N)
30640
70640
(1562-6)
(1562-6N)
31642
71642
(1437-13)
(1437-13N)
30648
(1625-1)
EXH
71031
(1437-2N)
INT
30659
70659
(1750-1)
(1750-1N)
70648
(1625-1N)
L6
245ci/4.0L
3.437" Bore
L6
251ci/4.1L
3.437" Bore
F-244, 245 Series Continental Eng. incl.
Combine: S, SP168, SRR168, SR, 570
Tractor: S, SR
IND8, M Series 251ci Chrysler Industrial
Eng. Combine: 2890, 3490, 3496,
4290, 4292, 4293, 4296
239
INT
EXH
EXH
INT
EXH
30648
70648
(1625-1)
(1625-1N)
31633
71633
(1348E-1)
(1348E-1N)
30558
70558
(1375-1)
(1375-1N)
30671
70671
(1812-1)
(1812-1N)
30646
70646
(1625-2)
(1625-2N)
VALVE SEAT
EXH
L4
226ci/3.7L
4.000" Bore
1.3800
(1500-1)
1956-63 206H, 206LR, 206MR Series
Minneapolis-Moline Diesel Eng.
Tractor: 335, 445, Jet Star, 4 Star,
Big Mo 500, Big Mo 600
1956-73 D206-4 Series Minneapolis-Moline
Diesel Eng.
Tractor: 445, Jet Star,
Jet Star 3, 4 Star, 4 Star Super
L4
220ci/3.6L
3.750" Bore
31157
(1375-5)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L6
265ci/4.3L
3.437" Bore
L4
283ci/4.6L
4.250" Bore
L4
336ci/5.5L
4.625" Bore
L4
403ci/6.6L
4.625" Bore
IND 265, M265 Series Chrysler Industrial
Eng. Combine: 2890, 3490, 3496,
4290, 4292, 4293, 4296
283A, 283A-4, 283B, 283C, 283E
Series Diesel Minneapolis-Moline Eng.
Tractor: U, U(Type S), UB, UBE, UBN,
UBU, UMIL, URU, UTE, UTI, UTIL, UTLX,
UTN, UTS, UTU, 5 Star Series
1957-69 D336-4 Diesel; 336, 336A Gas, LPG,
Propane, Natural Gas MinneapolisMoline Eng.
Tractor: M5, M504, M602, M604, M670,
M670 Super, 5 Star
1953-56 403-4, GE, LE Series Minneapolis-Moline
Diesel Eng. after Serial #902208
Tractor: G, GEU, GT, GTA, GTB, GTI, GU
INT
EXH
INT
31695
71695
(1640E-1)
(1640E-1N)
30672
70672
(1812-5)
(1812-5N)
70648
1.8180
1.563
.250
1.718
1.6400
1.375
.250
1.501
1.8180
1.500
.250
1.718
1.6300
1.375
.219
1.594
1.7550
1.500
.219
1.718
1.6300
1.375
.219
1.594
2.0060
1.625
.281
1.8800
1.500
.219
2.0060
1.625
.281
1.8800
1.500
.250
1.8180
1.500
.250
1.718
1.7550
1.375
.313
1.594
1.8180
1.500
.250
1.718
1.6300
1.375
.219
1.594
1.8180
1.500
.250
1.718
1.7550
1.375
.313
1.594
1.7550
1.500
.250
1.6300
1.375
.250
1.8180
1.500
.250
1.718
1.6300
1.375
.219
1.594
1.7550
1.500
.250
1.6300
1.375
.250
1.8180
1.500
.250
1.6920
1.375
.250
2.0060
1.625
.281
1.8800
1.500
.250
1.8180
1.500
.250
1.718
1.7550
1.375
.313
1.594
(1625-1N)
INT
30658
70658
(1750-2)
(1750-2N)
EXH
70648
(1625-1N)
INT
EXH
EXH
1948-56 403-4, HEB Series Gas, LPG, Propane,
Natural Gas Minneapolis-Moline Eng.
70671
(1812-1N)
EXH
INT
1940-56 403-4, HE, HEB Series MinneapolisMoline Diesel Eng. (Low/Regular
Compression)
30671
(1812-1)
INT
30725
70725
(2000-6)
(2000-6N)
31736
71736
(1875-13)
(1875-13N)
30725
70725
(2000-6)
(2000-6N)
30919
70919
(1875-9)
(1875-9N)
30672
70672
(1812-5)
(1812-5N)
EXH
70654
(1750-9N)
L6
425ci/7.0L
4.250" Bore
INT
1934-56 KEA, KEC, KED, KEF Series
Minneapolis-Moline Diesel Eng.
30672
70672
(1812-5)
(1812-5N)
EXH
70648
(1625-1N)
INT
1942-56 KEC, KEF Series Gas, LPG,
Propane, Natural Gas MinneapolisMoline Eng.
30672
70672
(1812-5)
(1812-5N)
EXH
70654
(1750-9N)
INT
1959-73 D425A Series Minneapolis-Moline
Diesel Eng. Tractor: GBD, GTBT,
GVI Wheel Tractor
EXH
INT
1959-73 D425 Series Gas, LPG, Propane,
Tractor: GV1, G900-G
30659
70659
(1750-1)
(1750-1N)
30646
70646
(1625-2)
(1625-2N)
30672
70672
(1812-5)
(1812-5N)
EXH
70648
VALVE SEAT
(1625-1N)
L6
504ci/8.3L
4.625" Bore
L6
605ci/9.9L
4.625" Bore
INT
1959-73 D504-A6 Series Minneapolis-Moline
Diesel Eng.
Tractor: GBD, GTBT, GVI
EXH
INT
1962-73 504, 504A Series Minneapolis-Moline
Gas, LPG, Propane, Natural Gas Eng.
Tractor: G705, G706, G707, G708,
G1000
1948-56 605-6, HE, HEB Series MinneapolisMoline Diesel Eng. (Low/Regular
Compression)
30659
70659
(1750-1)
(1750-1N)
30646
70646
(1625-2)
(1625-2N)
30672
70672
(1812-5)
(1812-5N)
EXH
70678
(1687-7N)
INT
EXH
INT
1948-56 605-6 Series Gas, LPG, Propane,
EXH
30725
70725
(2000-6)
(2000-6N)
30919
70919
(1875-9)
(1875-9N)
30672
70672
(1812-5)
(1812-5N)
70654
(1750-9N)
240
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
L6
605ci/9.9L
4.625" Bore
1948-56 605-6A Series Gas, LPG, Propane,
INT
30672
70672
(1812-5)
(1812-5N)
EXH
70648
1.8180
1.500
.250
1.718
1.6300
1.375
.219
1.594
1.8180
1.500
.250
1.718
1.6300
1.375
.219
1.594
1.8180
1.500
.250
1.718
1.7550
1.375
.313
1.594
1.8180
1.500
.250
1.718
1.6300
1.375
.219
1.594
1.8180
1.500
.250
1.718
1.6300
1.375
.219
1.594
1.5680
1.250
.280
1.488
1.3820
1.000
.280
1.220
1.4445
1.100
.293
1.340
1.3190
.977
.300
1.181
1.4445
1.181
.280
1.380
1.3190
.977
.300
1.181
1.1320
.825
.285
1.024
1.4445
1.162
.310
1.299
1.3195
1.065
.285
1.220
1.4445
1.162
.310
1.299
1.4440
1.135/1.250
.316
1.339
1.3190
1.045
.316
1.201
1.7550
1.438/1.500
.302
1.650
1.5070
1.180
.300
1.304
1.5680
1.250
.280
1.496
1.3820
1.000
.280
1.220
(1625-1N)
L6
800ci/13.1L
5.313" Bore
1957-68 800-6A Series Minneapolis-Moline Eng.
w 10A-4210 Cylinder Head
INT
30672
70672
(1812-5)
(1812-5N)
EXH
70648
(1625-1N)
12 Cyl
1210ci/19.8L
4.625" Bore
INT
1948-56 1210-12 Series Natural Gas, LPG,
Minneapolis-Moline Eng.
30672
70672
(1812-5)
(1812-5N)
EXH
70654
(1750-9N)
1948-68 1210-12A Series Minneapolis-Moline Eng.
INT
30672
70672
(1812-5)
(1812-5N)
EXH
70648
(1625-1N)
12 Cyl
1600ci/26.2L
5.313" Bore
INT
1948-68 1600-12A, A4T-1600 Series
Minneapolis-E280 Moline Eng.
30672
70672
(1812-5)
(1812-5N)
EXH
70648
(1625-1N)
MITSUBISHI PASSENGER CAR AND TRUCK
L4
1439cc/1.4L
2.874" (73mm) Bore
INT
1983-88 OHV 4G33 Eng.
Forklift & Industrial
31115
(1562-50)
EXH
31064
(1375-64)
L4
1468cc/1.5L
2.972" (75.5mm) Bore
1985-89 SOHC 8 valve G15B Eng. (85-88)
w E.F.I. Mirage
SOHC 8 valve G4AJ Eng. (86-89)
Precis
1989-94 SOHC 8 valve 4G15 Eng. (89-90)
w M.P.F.I. Mirage
SOHC G4DJ Eng (90-93), G4AJK (Vin J)
Eng (90-94). Precis
1991-98 SOHC 12 valve 4G15 (Vin A) Eng.
Mirage w 26mm Valve Head
INT
31655
(1437-57)
EXH
31340
(1312-53)
INT
31646
(1437-63)
EXH
31340
(1312-53)
INT
31048
(1125-52)
EXH
31649
(1437-61)
INT
Mirage w 31mm Valve Head
31630
(1312-62)
EXH
31649
(1437-61)
1989-90 DOHC 16 valve 4G61 Eng. w M.P.F.I.
(Vin Y). Eclipse
INT
EXH
INT
30809
70809
(1437-68)
(1437-68N)
30563
70563
(1312-64)
(1312-64N)
31117
(1750-60)
EXH
31666
(1500-75)
L4
1597cc/1.6L
76.9mm Bore
INT
1985-88 SOHC G32B w Turbo Eng.
Mirage Turbo
31115
(1562-50)
EXH
241
31064
71064
(1375-64)
(1375-64N)
VALVE SEAT
1989-92 DOHC Intercooled 16 valve 4G61 Eng.,
4G61T Turbo Eng.
Mirage
L4
1595ci/1.6L
2.97" (82.3mm) Bore
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
MITSUBISHI (CONT'D)
L4
1755cc/1.8L
3.17"(80.6mm) Bore
INT
1990-94 SOHC 4G37 Eng.
Eclipse
31717
1.7570
1.360
.315
1.654
1.5070
1.180
.300
1.339
1.4440
1.135/1.250
.316
1.339
1.3190
1.045
.316
1.201
1.7560
1.445/1.617
.310
1.693
1.5050
1.215
.310
1.378
1.2559
.996
.254
1.181
1.1940
.905
.257
1.063
1.2570
1.023
.273
1.181
1.1945
0.880
.280
1.063
1.7560
1.445/1.617
.310
1.693
1.5050
1.215
.310
1.378
1.7560
1.445/1.617
.310
1.693
1.5050
1.215
.310
1.378
1.4440
1.135/1.250
.316
1.339
1.3190
1.045
.316
1.201
1.4445
1.142
.336
1.339
1.3190
1.045
.316
1.201
1.7570
1.460
.275
1.575
1.5070
1.182
.275
1.339
1.8820
1.575/1.692
.317
1.811
1.6310
1.298
.317
1.496
1.3820
1.100
.300
1.299
1.2570
0.982
.329
1.142
1.4445
1.142
.336
1.3190
1.045
.316
1.3820
1.100
.300
1.299
1.2570
0.982
.329
1.142
(1750-59)
EXH
31666
(1500-75)
INT
1989-90 DOHC 16 valve 4G37 Eng.
Eclipse
EXH
L4
1795cc/1.8L
3.17" (80.6mm) Bore
L4
1834cc/1.8L
3.19" (81mm) Bore
INT
1983-88 SOHC G62B Eng., G62BT Turbo Eng.
Cordia, Tredia
30563
70563
(1312-64)
(1312-64N)
31215
(1750-61)
EXH
1992
30809
(1437-68)
INT
SOHC 16 valve 4G93 Eng (Vin C, D).
Expo LRV, Mirage
30716
70716
(1500-62)
(1500-62N)
31100
(1250-55)
EXH
31146
(1187-51)
INT
1993-98 SOHC 16 valve 4G93 Eng (Vin C).
Expo LRV, Mirage
31620
(1250-60)
EXH
31611
(1187-54)
L4
1997cc/2.0L
3.35" (85mm) Bore
INT
1982-89 SOHC G63B Eng. w Carb.
Cordia, Mitsubishi Truck (Pick-Up),
Tredia
31215
(1750-61)
EXH
30716
(1500-62)
INT
1989-92 SOHC 4G63 Eng. w M.P.F.I.
Galant,. Eclipse
31215
(1750-61)
EXH
30716
(1500-62)
INT
Galant, Eclipse
30809
(1437-68)
EXH
30563
(1312-64)
INT
1992-98 DOHC 16 valve 4G63T Eng. with
Turbo. Galant.
EXH
INT
VALVE SEAT
L4
1983-86 SOHC 4D55 Turbo Diesel Eng.
2346cc/2.3L
Montero S, S Turbo Diesel, SP Turbo
3.5866" (91.1mm) Bore
Diesel, SPX Turbo Diesel
L4
2351cc/2.4L
3.40" (86.5mm) Bore
31658
(1437-73)
30563
70563
(1312-64)
(1312-64N)
31719
(1750-66)
EXH
1986-98 SOHC 8 valve 4G64 (89-98),
SOHC G64B Eng (86-88).
Galant, Mitsubishi Truck (Pick-up), Van
INT
31668
71668
(1500-72)
(1500-72N)
31034
(1875-51)
EXH
31218
(1625-56)
1993-97 SOHC, DOHC 16 valve 4G64 Eng. w/o
Electr. Power Steering. Galant, Expo
INT
31139
(1375-62)
EXH
31615
(1250-59)
INT
1995-97 SOHC, DOHC 16 valve 4G64 Eng. w
Electr. Power Steering. Galant, Expo
31658
(1437-73)
EXH
30563
(1312-64)
V6
2497cc/2.5L
83.5mm Bore
INT
1995-97 SOHC 24 valve 6G73 Eng.
Galant, Expo
31139
(1375-62)
EXH
31615
(1250-59)
242
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
MITSUBISHI (CONT'D)
L4
2555cc/2.6L
3.59" (91mm) Bore
V6
2972cc/3.0L
3.59" (91mm) Bore
1983-89 SOHC G54B Eng. and G54BT - Turbo.
Montero, Starion, Mitsubishi Truck
(Pick-up)
1988-98 SOHC 12 valve 6G72 Eng. incl. LPG
Diamante, Galant, Galant Sigma,
Montero, Sigma, Mitsubishi Truck
1991-98 DOHC 24 valve 6G72 Eng. incl. Turbo
300GT, Diamante
INT
EXH
INT
EXH
INT
1.575/1.692
.317
1.810
31218
71218
(1625-56)
(1625-56N)
1.6310
1.298
.317
1.495
31215
1.7560
1.445/1.617
.310
1.693
31287
71287
(1562-69)
(1562-69N)
1.5695
1.219
.317
1.378
31644
1.4440
1.180
.305
1.375
1.3190
1.045
.316
1.199
1.4440
1.180
.305
1.375
1.3190
1.045
.316
1.199
1.5070
1.175
.236
1.381
1.3190
1.042
.238
1.146
1.5050
1.250/1.390
.240
1.381
1.3190
1.042
.238
1.146
1.5050
1.250
.219
1.375
1.3170
1.063
.219
1.200
1.5050
1.250/1.390
.240
1.462
1.3190
1.042
.238
1.188
1.5050
1.250/1.390
.240
1.462
1.3190
1.042
.238
1.188
1.5050
1.180/1.311
.215
1.375
1.3170
1.063
.219
1.200
1.5050
1.250/1.390
.240
1.378&1.462
1.3190
1.042
.238
1.181&1.188
1.6300
1.313
.219
1.6300
1.313
.219
(1437-59)
INT
Montero
1.8820
(1750-61)
EXH
V6
3496cc/3.5L
93mm Bore
31034
(1875-51)
30563
70563
(1312-64)
(1312-64N)
31644
(1437-59)
EXH
30563
70563
(1312-64)
(1312-64N)
NASH (SEE AMERICAN MOTORS)
NAVISTAR (SEE I.H.C. TRUCK)
NISSAN PASSENGER CAR & TRUCK (INCLUDES DATSUN)
L4
988cc/1.0L
2.87" (73mm) Bore
INT
1969-74 A10 Series Eng.
Nissan/Datsun 1000
30824
(1500-77)
EXH
30779
(1312-67)
L4
1171cc/1.1L
2.87" (73mm) Bore
INT
Nissan/Datsun 1200, B110, B210
30024
(1500-52)
EXH
30779
(1312-67)
L4
1189cc/1.2L
2.87" (73mm) Bore
INT
1961-65 E1 Series Eng.
Nissan/Datsun 312, 410
Truck: 320 Datsun (Pick-up)
30711
(1500-1)
EXH
31289
(1312-6)
L4
1237cc/1.2L
2.95" (75mm) Bore
INT
1980-82 A12A Series Eng.
Nissan/Datsun 210
30024
(1500-52)
EXH
30779
(1312-67)
INT
Nissan/Datsun B210
30024
(1500-52)
EXH
30779
L4
1299cc/1.3L
2.87" (73mm) Bore
INT
1965-73 J13 Series Eng.
Nissan/Datsun 411
Truck: 520 Datsun (Pick-up)
31207
(1500-74)
EXH
31289
(1312-6)
L4
1397cc/1.4L
2.99" (76mm) Bore
Nissan/Datsun: 210, B210, 310, B310,
310GX, F10
INT
30024
(1500-52)
EXH
30779
(1312-67)
L4
1483cc/1.5L
(78mm) Bore
INT
1971-89 OHV J15 Series Eng.
30649
(1625-4)
EXH
30649
(1625-4)
243
VALVE SEAT
(1312-67)
L4
1288cc/1.3L
2.87" (73mm) Bore
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
NISSAN (CONT'D)
L4
1487cc/1.5L
2.99" (76mm) Bore
INT
1982-83 SOHC E15, E15S Eng.
Nissan/Datsun: Sentra, 310, Pulsar
31286
1.5695
1.265/1.320
.280
1.460
1.3190
.975
.280
1.185
1.5695
1.260
.233
1.457
1.3195
1.065
.285
1.220
1.5050
1.250/1.390
.240
1.378&1.462
1.3190
1.042
.238
1.181&1.187
1.8190
1.490/1.600
.305
1.660
1.5070
1.180/1.318
.305
1.304
1.6310
1.320
.300
1.500
1.5070
1.180/1.318
.305
1.304
1.8195
1.500/1.555
.278
1.658
1.4440
1.140
.305
1.267
1.4445
1.090
.354
1.267
1.5695
1.265/1.320
.280
1.460
1.3190
0.975
.280
1.185
1.2560
.875
.250
1.142
1.3820
1.000
.280
1.299
1.2570
1.01
.257
1.181
1.0690
.790
.260
.945
1.3820
1.022
.230
1.220
1.2570
0.905/1.000
.230
1.102
1.5060
1.255
.318
1.417
1.3820
1.120
.325
1.220
1.8190
1.490/1.600
.305
1.648
1.5070
1.180/1.318
.305
1.382
1.5050
1.180/1.311
.215
1.339
1.2570
0.905/1.000
.230
1.102
1.7570
1.454
.277
1.614
1.5070
1.180/1.318
.305
1.378
(1562-66)
EXH
31058
(1312-68)
INT
1983-84 SOHC E15T Turbo Eng.
Nissan/Datsun: Pulsar
EXH
L4
1488cc/1.5L
2.99" (76mm) Bore
31677
(1562-73)
1979-82 A 15 Series Eng.
Nissan/Datsun: 210, 210 Station Wagon,
INT
31630
71630
(1312-62)
(1312-62N)
30024
(1500-52)
310 EXH
30779
(1312-67)
L4
1595cc/1.6L
3.266' (83mm) Bore
INT
1968-73 SOHC L16 Series Eng. - Truck
Nissan/Datsun Truck: 620 Pick-up
30030
(1812-50)
EXH
30031
(1500-54)
INT
1968-73 SOHC L16 Series Eng. - Car
Nissan/Datsun: 510, 521
31223
(1625-62)
EXH
30031
(1500-54)
L4
1595cc/1.6L
3.433" (87mm) Bore
1965-70 OHV R16 Series Eng.
Nissan/Datsun: SPL311, DR411, 411,
1600
INT
31285
(1812-55)
EXH
31643
(1437-50)
EXH
Alt. Depth Exh. seat w .354 depth
31652
(1437-53)
L4
1597cc/1.6L
2.99" (76mm) Bore
INT
1983-88 SOHC E16, E16-I, E16S - Carb. & F.I.
Series Eng.
Nissan Pulsar, Sentra
31286
(1562-66)
EXH
31058
(1312-68)
INT
1989-90 SOHC 12 valve GA16, GA16-I Series
Eng. Nissan Pulsar, Sentra
31151
(1250-50)
EXH
31064
(1375-64)
1991-99 DOHC 16 valve G16DE, GA16DE Series
Eng. Nissan/Datsun: NX Coupe, Sentra
INT
31619
(1250-54)
EXH
31047
(1062-50)
L4
1597cc/1.6L
3.33" (84.5mm) Bore
1987
INT
DOHC 16 valve CA16D Series Eng.
Nissan Pulsar
31636
(1375-54)
EXH
30230
VALVE SEAT
(1250-56)
L4
1680cc/1.7L
3.15" (80mm) Bore
INT
1983-86 SOHC CD17 Series Diesel Eng.
Nissan Sentra Diesel
31235
(1500-69)
EXH
31635
(1375-55)
L4
1770cc/1.8L
3.346" (85mm) Bore
INT
1972-75 SOHC L18 Series Eng.
Nissan/Datsun: 610, 710, 1800 Series
Nissan/Datsun Truck: 620 (Pick-up)
30030
(1812-50)
EXH
30031
(1500-54)
L4
1809cc/1.8L
3.27" (83mm) Bore
INT
1988-89 DOHC CA18D, CA18DE Series Eng.
Nissan Pulsar, Pulsar SE
31207
(1500-74)
EXH
30230
(1250-56)
INT
1984-88 SOHC CA18ET Series Eng.
Nissan 200SX, 200SX Turbo
31714
(1750-64)
EXH
244
30031
70031
(1500-54)
(1500-54N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
NISSAN (CONT'D)
L4
1952cc/2.0L
3.346" (85mm) Bore
1973-81 SOHC L20B Series Eng.
Nissan/Datsun: 510, 610, 710, 200SX
Truck: 620 Pick-up
INT
30030
1.8190
1.490/1.600
.305
1.648
1.5070
1.180/1.318
.305
1.382
1.8190
1.405/1.599
.315 1.654 & 1.658
1.6310
1.320
.300 1.496 & 1.500
1.7570
1.454
.277
1.617
1.5070
1.180/1.318
.305
1.381
1.6920
1.406
.250
1.4425
1.125
.313
1.9430
1.625
.312
1.802
1.6320
1.298
.317
1.420
1.4445
1.162
.214
1.339
1.2570
.982/1.102
.212
1.181
1.5690
1.300
.256
1.496
1.4445
1.125
.257
1.260
1.8190
1.405/1.599
.315
1.658
1.6310
1.320
.300
1.500
1.8195
1.535
.293
1.658
1.6320
1.250
.293
1.500
1.5060
1.180/1.345
.307
1.339
1.6945
1.375
.295
1.575
1.5060
1.180/1.280
.214
1.441
1.3190
1.042
.238
1.232
1.7570
1.457
.312
1.654
1.5070
1.180/1.318
.305
1.299
1.7570
1.457
.312
1.648
1.5070
1.180/1.318
.305
1.382
1.6320
1.380
.257
1.575
1.5070
1.203/1.294
.280
1.339
(1812-50)
EXH
30031
(1500-54)
1980-85 SOHC Z20, Z20E, Z20S Series Eng.
Nissan 510, 710, 200SX
Truck: 720 Pick-up
INT
31137
(1812-54)
EXH
31223
(1625-62)
L4
1974cc/2.0L
3.33" (84.5mm) Bore
1982-89 SOHC CA20E, CA20S Series Eng.
INT
31714
(1750-64)
EXH
30031
(1500-54)
L4
1982cc/2.0L
3.433" (87.2mm) Bore
INT
1967-82 H20 Series Eng.
30670
(1687-1)
EXH
30803
(1437-6)
1968-70 U20 Series Eng.
Nissan/Datsun SR311, Passenger Car
INT
31134
(1937-7)
EXH
31218
(1625-56)
L4
1998cc/2.0L
3.386" (86mm) Bore
INT
1991-99 DOHC SR20DE Series Eng.
Nissan NX Coupe, NX 2000,
Sentra SE-R, Infiniti G20
31661
(1437-71)
EXH
31618
(1250-57)
L4
2164cc/2.2L
3.268" (83mm) Bore
L4
2187cc/2.2L
3.425" (87mm) Bore
INT
1981-83 SD22 Series Diesel Eng.
Nissan Truck: 720 Diesel Pick-up
31080
(1562-76)
EXH
1981-86 SOHC Z22, Z22E, Z22S Series Eng.
Nissan 200SX (82-83)
Truck: 720 Pick-up (81-86)
INT
31648
71648
(1437-60)
(1437-60N)
31137
(1812-54)
EXH
31223
(1625-62)
L4
2389cc/2.4L
3.500" (89mm) Bore
1983-89 SOHC Z24, Z24-I Series Eng. Nissan
Truck: D21, Hardbody, Pathfinder,
Van, 720 Pick-up
INT
31727
(1812-56)
EXH
31688
(1625-60)
1989-96 SOHC 12 valve KA 24E Series Eng.
Nissan Axxess, Stanza, 240SX
Truck: D21, Hardbody, Pathfinder, Van,
720 Pick-up
1991-99 DOHC 16 valve KA24DE Series Eng.
Nissan Altima, 240SX
INT
31258
(1500-53)
EXH
31707
(1687-56)
INT
31207
(1500-74)
30779
L6
2393cc/2.4L
3.268" (83mm) Bore
INT
Nissan/Datsun: 240Z
31317
(1750-52)
EXH
30031
(1500-54)
INT
1977-84 SOHC L24E Series Eng.
Nissan/Datsun: Maxima, 810
31317
(1750-52)
EXH
30031
(1500-54)
L4
2488cc/2.5L
3.500" (89mm) Bore
INT
1981-88 SOHC SD25 Series Diesel Eng.
Nissan Truck: 720 Diesel Pick-up
31687
(1625-59)
EXH
245
31484
71484
(1500-70)
(1500-70N)
VALVE SEAT
(1312-67)
EXH
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
NISSAN (CONT'D)
L6
2565cc/2.6L
3.268" (83mm) Bore
INT
Nissan/Datsun: 260Z
31317
1.7570
1.457
.312
1.648
1.5070
1.180/1.318
.305
1.382
1.8195
1.530/1.710
.307
1.736
1.5070
1.180/1.318
.305
1.380
1.6945
1.338
.309
1.535
1.4445
1.162
.310
1.260
1.8195
1.500/1.555
.278
1.657
1.5060
1.179/1.307
.293
1.382
1.5060
1.175/1.235
.236
1.339
1.3195
0.965
.235
1.164
1.5060
1.175/1.235
.236
1.382
1.3190
1.042
.238
1.205
1.6920
1.406
.250
1.4425
1.125
.313
(1750-52)
EXH
30031
(1500-54)
L6
2753cc/2.8L
3.386" (86mm) Bore
L6
2793cc/2.8L
3.327" (84.5mm) Bore
V6
2960cc/3.0L
3.430" (87mm) Bore
1975-83 SOHC L28, L28E Series & L28ET Series
Turbo Eng (81-83). Nissan/Datsun:
280Z, 280ZX, 280ZX Turbo
INT
EXH
INT
1981-84 SOHC LD28 Series Diesel Eng.,
(Alum. Head) Nissan Maxima Diesel
31239
(1812-51)
30031
70031
(1500-54)
(1500-54N)
31706
(1687-53)
EXH
1984-98 SOHC VG30, VG30E, VG30T-Turbo
Series Eng. Nissan 200SX, 300ZX,
Maxima. Nissan Truck: D21, Hardbody,
Pathfinder, Quest, 720 Pick-up. Infiniti M-30
1990-96 DOHC 24 valve VG30D, VG30DE,
VG30DTT Turbo Series Eng.
Nissan 300ZX, 300ZX Turbo. Infiniti J-30
INT
71649
(1437-61N)
31285
(1812-55)
EXH
INT
31247
71247
(1500-68)
(1500-68N)
31205
(1500-77)
EXH
INT
1992-97 DOHC 24 valve VE30DE Series Eng.
Nissan Maxima
31649
(1437-61)
31625
71625
(1312-63)
(1312-63N)
31205
(1500-77)
EXH
30779
(1312-67)
V6
2974cc/3.0L
3.433" (87.2mm) Bore
INT
SOHC H30 Series Eng.
30670
(1687-1)
EXH
30803
(1437-6)
V6
3274cc/3.3L
93mm Bore
INT
1996-99 SOHC VG33E Series Eng.
Nissan Pathfinder, Truck
31285
1.8195
1.500/1.555
.278
1.657
(1812-55)
EXH
31247
1.5060
1.179/1.307
.293
1.382
1.5695
1.260
.233
1.501
1.3820
1.107
.237
1.299
1.4425
1.188
.219
1.313
1.1920
1.000
.188
1.125
1.5050
1.250
.219
1.395
1.3800
1.125
.188
1.255
1.5050
1.250
.219
1.313
1.4425
1.125
.250
1.125
1.4425
1.188
.219
1.313
1.1920
1.000
.188
1.125
(1500-68)
V8
4494cc/4.5L
93mm Bore
INT
1990-97 4OHC VH45DE Series Eng.
Infiniti Q45
31677
(1562-73)
EXH
31638
(1375-60)
VALVE SEAT
OLIVER CORP.
L4
129ci/2.1L
3.312" Bore
L4
144ci/2.4L
3.500" Bore
66HC, 66KD Waukesha Eng. 166HC,
166HC, 660HC Super, 660KD
INT
EXH
INT
55HC, Super 55HC Waukesha Eng.
31609
71609
(1187-1)
(1187-1N)
30711
(1500-1)
EXH
INT
Super 66HC, Super 66KD
Waukesha Eng.
30790
70790
(1375-4)
(1375-4N)
30711
(1500-1)
EXH
L6
216ci/3.5L
3.3125" Bore
31030
(1437-3)
INT
77HC, 77KD Waukesha Eng.
30802
70802
(1437-8)
(1437-8N)
31030
(1437-3)
EXH
246
31609
71609
(1187-1)
(1187-1N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
OLIVER CORP. (CONT'D)
L6
216ci/3.5L
3.500" Bore
Super 77H & Super 77KD to serial #6502,
88HC & Super 88HC to serial #6502999,
Waukesha Eng.
INT
EXH
INT
Super 77H & Super 77KD after
serial #6502, Waukesha Eng.
770 Series Gas & LPG Eng incl. 770LP
Waukesha Eng.
INT
1.250
.219 1.313 & 1.395
30790
70790
(1375-4)
(1375-4N)
1.3800
1.125
.188
1.255
30711
1.5050
1.250
.219
1.395
88D, Super 88D to serial #6502999
Waukesha Eng.
INT
71609
(1187-1N)
1.1920
1.000
.188
1.125
30711
1.5050
1.250
.219
1.395
30802
70802
(1437-8)
(1437-8N)
1.4425
1.125
.250
1.255
30823
1.5050
1.188
.218
1.1920
1.000
.219
1.6300
1.375
.219
1.5050
1.250
.219
1.5050
1.250
.219
1.395
1.4425
1.125
.250
1.255
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.219
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.219
1.500
2.0050
1.813
.219
1.940
1.6920
1.438
.219
1.600
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.219
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.219
1.500
1.8180
1.500/1.625
.219
1.782
1.5680
1.312
.219
1.460
1.9420
1.688
.219
1.842
1.6300
1.375
.219
1.541
(1500-2)
EXH
88HC & Super 88HC after serial
#6503000.
880 Series Gas & LPG Eng incl. 880LP
after serial #60501. Waukesha Eng.
88KD & Super 88KD to serial
#6503000.
Waukesha Eng.
31609
(1187-1)
(1500-1)
EXH
L6
265ci/3.8L
3.750" Bore
1.5050
(1500-1)
EXH
L6
231ci/3.8L
3.500" Bore
30711
(1500-1)
INT
31610
71610
(1187-7)
(1187-7N)
30648
(1625-1)
EXH
INT
30711
70711
(1500-1)
(1500-1N)
30711
(1500-1)
EXH
30802
70802
(1437-8)
(1437-8N)
OMC MARINE
L4
153ci/2.5L
3.875" Bore
L4
181ci/3.0L
4.000" Bore
L6
250ci/4.1L
3.875" Bore
EXH
INT
OHV Buick-GMC Eng.
140 H.P.
30541
70541
(1562-9)
(1562-9N)
30530
(1812-3)
EXH
Oversize replacement Int. w 1.940
vl. hd., .219 depth
Oversize replacement Exh. w 1.600
vl. hd., .219 depth
OHV Chevrolet Eng.
165 H.P.
INT
70541
(1562-9N)
30952
(2000-7)
EXH
INT
30664
70664
(1687-2)
(1687-2N)
30530
(1812-3)
EXH
INT
OHV Chevrolet Eng.
185 H.P.
30541
(1562-9)
30541
70541
(1562-9)
(1562-9N)
30530
(1812-3)
EXH
INT
OHV Ford Eng.
170, 175 H.P.
30541
70541
(1562-9)
(1562-9N)
30530
(1812-3)
EXH
INT
190 H.P.
30643
70643
(1562-1)
(1562-1N)
30936
(1937-17)
EXH
247
30648
70648
(1625-1)
(1625-1N)
VALVE SEAT
V8
302ci/5.0L
4.000" Bore
30530
(1812-3)
V8
283ci/4.6L
3.875" Bore
INT
OHV Chevrolet Eng.
100, 110, 120 H.P.
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
OMC MARINE (CONT'D)
V8
307ci/5.0L
3.875" Bore
V8
350ci/5.7L
4.000" Bore
V8
351ci/5.7L
4.000" Bore
INT
OHV Chevrolet Eng.
210, 215, 225, 230, 235, 245 H.P.
30530
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.219
1.500
2.0050
1.813
.219
1.940
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.219
1.500
2.0050
1.813
.219
1.940
1.8180
1.500/1.625
.219
1.782
1.5680
1.312
.219
1.460
1.9420
1.688
.219
1.842
1.6300
1.375
.219
1.541
1.7570
1.323/1.490
.280
1.673
1.5070
1.205/1.274
.280
1.339
1.7550
1.438
.250
1.575
1.5050
1.250
.250
1.339
1.6300
1.375
.219
1.534
1.4425
1.188
.219
1.315
1.6300
1.375
.219
1.534
1.4425
1.188
.219
1.315
1.8820
1.563
.219
1.744
1.5680
1.250
.219
1.440
1.8820
1.563
.219
1.744
1.5680
1.250
.219
1.440
(1812-3)
EXH
INT
vl. hd., .219 depth
OHV Chevrolet Eng.
250, 260, 290 H.P.
30541
70541
(1562-9)
(1562-9N)
30952
(2000-7)
INT
30530
(1812-3)
EXH
INT
vl. hd., .219 depth
OHV Ford Eng. - 235 H.P.
30541
70541
(1562-9)
(1562-9N)
30952
(2000-7)
INT
30530
(1812-3)
EXH
Oversize replacement Int.w 1.842 vl. hd.,
.219 depth
Oversize replacement Exh. w 1.541
vl. hd., .219 depth
INT
30643
70643
(1562-1)
(1562-1N)
30936
(1937-17)
EXH
30648
70648
(1625-1)
(1625-1N)
OPEL
L4
1817cc/1.8L
3.307" (84mm) Bore
INT
1976-79 OHV G180Z Isuzu Eng.
Opel Passenger Cars
31467
(1750-51)
EXH
30015
(1500-50)
L4
1897cc/1.9L
3.661" (93mm) Bore
INT
1970-80 OHV 1900 Series Opel Eng.
Asconda, GT Coupe, Kadett, Manta,
Olympia, Rallye, Rekord, GT1900
30656
(1750-4)
EXH
30712
(1500-3
PERKINS
L3
152ci/2.5L
3.598" Bore
VALVE SEAT
L4
203ci/3.3L
3.600" Bore
L4
236ci/3.9L
3.875" Bore
L4
248ci/4.2L
3.975" Bore
G152 Gas, 3A152 Diesel, 3AD152 Direct
Inj. Diesel Eng. Engine Models: AD3.152,
AG3.152, A3.152, D3.152, 3.152,
3.152IND, 3.152TA, 3.1524, 3A.152, 3B.152
(Universal size insert listed above for
heads w/o factory installed seats.)
4A203 Diesel, 4AD203 Direct Injection
Diesel Eng. Engine Models: AD4.203,
A4.203, D4.203, D4.203TA, PA, PB,
P4.203, P4M, P459, 4.203, 4.203IND,
4.203TA, 4.2032, 4A.203
A4-236 Diesel Eng.
Engine Models: AG4.236, A4.236,
G4.236 Gas, T4.236, 4.236, 4.236IND,
4.236TA
4-248 Diesel Eng.
Engine Models: A4.248, 4.248, 4.2482
INT
70648
(1625-1N)
EXH
71030
(1437-3N)
INT
30648
70648
(1625-1)
(1625-1N)
EXH
71030
(1437-3N)
INT
31238
71238
(1875-19)
(1875-19N)
EXH
70640
(1562-6N)
INT
EXH
248
30648
(1625-1)
31238
71238
(1875-19)
(1875-19N)
70640
(1562-6N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
PERKINS (CONT'D)
L4
270ci/4.4L
108mm Bore
INT
D4.220cc, D4.270cc Diesel Eng.
JA300 Diesel Eng.
30935
70935
(1937-23)
(1937-23N)
EXH
70664
1.9430
1.688
.188
1.6920
1.438
.219
1.6300
1.375
.219
1.534
1.4425
1.188
.219
1.315
1.9430
1.688
.188
1.6920
1.438
.219
1.8820
1.563
.219
1.744
1.5680
1.250
.219
1.440
1.7550
1.500
.313
1.5695
1.219
.317
1.7560
1.410/1.560
.315
1.5060
1.200/1.240
.315
1.8195 1.500/1.5550
.278
1.6320
1.329
.280
1.6920
1.312
.250
1.588
1.4425
1.125
.250
1.300
1.8195 1.500/1.5550
.278
1.6320
1.329
.280
1.6929
1.339
.325
1.588
1.4425
1.125
.250
1.300
1.6920
1.312
.250
1.588
1.4425
1.125
.250
1.300
1.8190
1.500
.250
1.730
1.5680
1.250
.281
1.460
(1687-2N)
L6
305ci/5.0L
3.598" Bore
L6
340ci/5.6L
6-305 Diesel Eng.
Engine Models: C-305, MD6.305, 6.305,
6.305IND, 6.305TA, 6.306, 6B.305
R-6, F340, 6-340 Diesel Eng.
INT
30648
70648
(1625-1)
(1625-1N)
EXH
71030
(1437-3N)
INT
30935
70935
(1937-23)
(1937-23N)
EXH
70664
(1687-2N)
L6
354ci/5.8L
3.874" Bore
D354, 6.354, 1, 2, 3, 4, A6-354 Diesel
Eng. AT6-354, ATC6-354 Turbo Diesel Eng.
Engine Models: AT6.354, A6.354,
ATC.354, HT6.354, H6.354, SST6.3544,
T6.354, T6.3544, 6.354, 6.354IND, 6.354S,
6.354TA, 6.3544
INT
Peugeot 404 Gas Eng.
INT
31238
71238
(1875-19)
(1875-19N)
EXH
70640
(1562-6N)
PEUGEOT
L4
30660
(1750-13)
EXH
31287
(1562-69)
INT
Peugeot 404 Diesel Eng.
31246
(1750-63)
EXH
L4
1971cc/2.0L
88mm Bore
INT
1986-90 SOHC XN Series Eng.
Peugeot 505
31241
71241
(1500-58)
(1500-58N)
31285
(1812-55)
EXH
30860
(1625-54)
L4
2112cc/2.1L
90mm Bore
L4
2165cc/2.2L
88mm Bore
INT
1974-90 XD90 Series Diesel Eng.
Peugeot 504 Diesel
30675
(1687-6)
EXH
INT
1986-90 N9T, ZDJL Series Eng.
Peugeot 505
30802
70802
(1437-8)
(1437-8N)
31285
(1812-55)
EXH
30860
V6
2664cc/2.7L
88mm Bore
1977-83 XD2 Diesel, XD2S Turbo Diesel Series
Eng. - Early w Large Glow Plug.
Peugeot 504, 505 & 604 Diesel & Turbo
Diesel
1977-83 Late model engines w Small Glow Plug.
Peugeot 504, 505 & 604 Diesel & Turbo
Diesel
INT
EXH
INT
30802
70802
(1437-8)
(1437-8N)
30675
(1687-6)
EXH
INT
1972-80 SOHC PRV, ZM112 Series Eng.
Peugeot 604, 604SL
31185
(1687-50)
30802
70802
(1437-8)
(1437-8N)
30672
(1812-5)
EXH
30740
(1562-46)
249
VALVE SEAT
L4
2304cc/2.3L
94mm Bore
(1625-54)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
PEUGEOT (CONT'D)
V6
2848cc/2.8L
91mm Bore
INT
1986-90 SOHC PRV, ZN3J Series Eng.
Peugeot 505
31285
1.8195 1.500/1.5550
.278
1.6320
1.329
.280
31392
1.7618
1.457
31291
1.5070
1.210/1.248
.345
1.417
1.6940
1.300
.360
1.575
1.4440
1.180
.305
1.300
1.9430
1.625
.312
1.810
1.6929
1.339
.325
1.580
1.9430
1.625
.312
1.810
1.6929
1.339
.325
1.580
1.9430
1.625
.312
1.810
1.6929
1.339
.325
1.580
1.8820
1.575/1.692
.317
1.772
1.6300
1.375
.313
1.578
2.0060
1.750
.281
2.0060
1.625
.344
1.7570
1.468
.276
1.655
1.5070
1.203/1.294
.280
1.398&1.360
1.6320
1.329
.280
1.3820
1.000
.280
(1812-55)
EXH
30860
(1625-54)
PLYMOUTH (SEE CHRYSLER CORPORATION)
PONTIAC (SEE GENERAL MOTORS)
PORSCHE
4 Cyl
1971cc/2.0L
INT
1973-76 1971cc Air-Cooled Eng.
Porsche 912E, 914
EXH
.335
1.653
(1500-63)
4 Cyl
1984cc/2.0L
86.5mm Bore
1977-82 OHC 1984cc VC, W, XE, XF, XG,
XH Series Air Cooled Eng. except Turbo
Porsche 924 Series
INT
31083
(1687-52)
EXH
31644
(1437-59)
6 Cyl
1991cc/2.0L
INT
Porsche 911E, 911S, 911T
EXH
6 Cyl
2115cc/2.1L
INT
Porsche 911 Series
INT
Porsche 911 Series
71185
(1687-50N)
31134
31185
71185
(1687-50)
(1687-50N)
31134
(1937-7)
EXH
4 Cyl
2479cc/2.5L
31185
(1687-50)
(1937-7)
EXH
6 Cyl
2341cc/2.3L
31134
(1937-7)
INT
1983-90 SOHC 2479cc Air-Cooled Eng.
Porsche 924S, 944 Series
31185
71185
(1687-50)
(1687-50N)
31034
(1875-51)
EXH
30732
(1625-14)
RENAULT (SEE AMERICAN MOTORS)
VALVE SEAT
REO TRUCK
L6 & V8
255ci, 292ci, 331ci,
& 362ci
OA110, OA130, OA145, OH160, OH170,
OH185, OV195, OH200, OV200, OV207,
OV220, OV225, OV235, OA255, OA292,
OA331 Eng.
INT
EXH
30693
70693
(2000-20)
(2000-20N)
30728
70728
(2000-21)
(2000-21N)
ROVER
SAAB
L4
1985cc/2.0L
90mm Bore
INT
1973-89 SOHC B20, B20-1 Series 8 valve
Carb. and F.I. Eng. includes Turbo.
Saab: 90, 900, 9000
31715
(1750-65)
EXH
INT
1973-80 SOHC B20 Series Eng.
Saab: 99L, 99GL, 99 Series Turbo
31484
71484
(1500-70)
(1500-70N)
30860
(1625-54)
EXH
250
31064
71064
(1375-64)
(1375-64N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
SAAB (CONT'D)
L4
1985cc/2.0L
90mm Bore
INT
1985-90 DOHC B202 Series 16 valve Eng.
includes Turbo. Saab: 900, 9000
31064
1.3820
1.000
.280
1.260
1.3190
0.975
.280
1.142
1.6945
1.397
.257
1.575
1.4445
1.140
.237
1.340
1.3820
1.107
.237
1.274
1.1320
0.890
.237
1.081
1.2570
0.982
.329
1.142
1.4440
1.105
.322
1.299
1.6320
1.313
.281
1.437
1.3820
1.000
.280
1.283
1.8190
1.440/1.508
.316
1.563&1.630
1.5060
1.200/1.240
.315
1.362&1.385
1.8190
1.440/1.508
.316
1.563&1.630
1.5060
1.200/1.240
.315
1.362&1.385
1.8190
1.440/1.508
.316
1.563&1.630
1.5060
1.200/1.240
.315
1.362&1.385
1.3820
1.120
.325
1.280
1.2570
.930
.325
1.102
1.8190
1.440/1.508
.316
1.563&1.630
1.5060
1.200/1.240
.315
1.362&1.385
1.5695
1.170
.267
1.417
1.3820
1.000
.280
1.181
(1375-64)
EXH
31058
71058
(1312-68)
(1312-68N)
SATURN (ALSO SEE GENERAL MOTORS)
L4
116ci/1901cc/1.9L
3.230" (82mm) Bore
1991-99 SOHC 8 valve Vin Type 8, 9 Series Eng.
Saturn Cars: SC1, SC2, SL, SL1, SL2,
SLC, SW1, SW2
INT
31708
(1687-58)
EXH
31656
(1437-69)
1991-99 DOHC 16 valve Vin Type 7 Series Eng.
Saturn Cars: SC1, SC2, SL, SL1, SL2,
SLC, SW1, SW2
INT
31638
(1375-60)
EXH
31607
(1125-53)
SPECTRUM (SEE GENERAL MOTORS)
STERLING (SEE ACURA)
SUBARU
L3
1189cc/1.2L
78mm Bore
L4
1361cc/1.4L
3.347" (85mm) Bore
1987-92 SOHC EF12, EF12C, EF12E Vin 7, 8
Series Eng. Subaru: Justy. Universal
size seat. (Note: Check O.E. specs for
proper seat depth)
1973-76 OHV EA63 Series Eng.
Subaru: 1400, 1400DL, 1400GF,
1400GL Series (4WD vehicles)
INT
31615
(1250-59)
EXH
30806
(1437-65)
INT
31488
(1625-18)
EXH
31064
(1375-64)
H4
1595cc/1.6L
3.622" (92mm) Bore
H4
1781cc/1.8L
3.622" (92mm) Bore
1976-89 OHV EA71 Series Eng.
Subaru: DL, 1600, 1600DL, 1600GF,
1600GL Coupe/S.W., 1600 Brat (4 WD
vehicles), MPV
1980-89 OHV EA81 & EA81T - Turbo Series Eng.
Subaru: DL, 1800, 1800DL, 1800GL,
1800- Turbo, Brat (4 WD vehicles)
1985-95 SOHC EA82, EA82S, EA82T- Turbo
Vin 4 & 5 Series Eng.
Subaru: GL,
Loyale, RX, XT Coupe Series
EXH
31241
(1500-58)
INT
31327
(1812-52)
EXH
INT
31241
71241
(1500-58)
(1500-58N)
31327
(1812-52)
EXH
INT
31241
71241
(1500-58)
(1500-58N)
31635
(1375-55)
EXH
INT
31612
71612
(1250-63)
(1250-63N)
31327
(1812-52)
EXH
31241
71241
(1500-58)
(1500-58N)
SUZUKI
L4
1298cc/1.3L
2.91" (74mm) Bore
1986-98 SOHC 8 valve G13A, G13K, G13S,
G13BA Vin 3 & 8 Series Eng.
Suzuki: Samurai, Sidekick, Swift.
INT
31673
(1562-77)
EXH
31064
(1375-64)
251
VALVE SEAT
H6
2672cc/2.7L
92mm Bore
1990-98 SOHC 16 Valve EJ22, EJ22E,
EJ22T-Turbo (90-95) Vin 6 Series Eng.
Subaru: Impreza, Impreza Outback,
Legacy, Legacy Outback, Legacy
Turbo, Outback Sport
1990-97 SOHC ER27 Series Eng.
Subaru: XT6 Coupe
31327
(1812-52)
H4
2212cc/2.2L
96.9mm Bore
INT
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
SUZUKI (CONT'D)
1989-94 DOHC 16 valve G13K Vin 3 Series Eng.
Suzuki: Swift GTi
INT
31050
1.1940
0.934
.260
1.142
1.1940
0.934
.260
.944
1.5695
1.170
.267
1.417
1.3820
1.000
.280
1.181
1.5070
1.295
.262
1.441
1.3820
1.102/1.160
.260
1.278
1.2570
1.010
.257
1.149
1.0690
.790
.260
0.986
1.5050
1.250
.250
1.417
1.2560
.875
.250
1.142
1.5050
1.250
.250
1.417
1.2560
.875
.250
1.142
1.5050
1.215
.318
1.417
1.3195
1.044
.273
1.220
1.0690
0.790
.260
.945
1.2570
1.028
.257
1.181
1.3190
.975
.280
1.220
1.6300
1.313
.219
1.6300
1.313
.219
1.1940
0.934
.260
1.122
1.0690
0.790
.260
.965
1.5050
1.215
.318
1.417
1.3195
1.044
.273
1.220
1.257
1.01
.257
1.201
1.1320
0.854
.237
1.004
(1187-52)
EXH
31050
(1187-52)
L4
1324cc/1.3L
2.91" (74mm) Bore
L4
1590cc/1.6L
2.95" (75mm) Bore
1986-94 SOHC 8 valve G13A, G13BA Vin 3 & 16
Series Eng.
Suzuki: Samurai, Sidekick, Swift GA,
GLX, GS.
1989-97 SOHC 8 valve G16K, G16KC Series
Eng. Suzuki: Sidekick
INT
31673
(1562-77)
EXH
31064
(1375-64)
INT
31667
(1500-79)
EXH
30238
(1375-56)
INT
1997-98 SOHC 16 valve G16KV Series
31619
(1250-54)
EXH
31047
(1060-50)
TOYOTA PASSENGER CAR, TRUCK, INDUSTRIAL (INCLUDES LEXUS)
L4
1166cc/1.2L
2.952" (75mm) Bore
INT
1968-79 3K, 3KC Series Eng.
Corolla, Corolla 1200
30712
(1500-3)
EXH
31151
(1250-50)
L4
1290cc/1.3L
2.952" (75mm) Bore
INT
1981-84 4K, 4KC, 4KE Series Eng.
Starlet
30712
(1500-3)
EXH
31151
(1250-50)
L4
1452cc/1.5L
3.051"(77.5mm) Bore
INT
1979-88 SOHC 1AC, 3A, 3AC, 3AHU, 3AU,
Series Eng. Corolla, Tercel
30717
(1500-71)
EXH
31624
(1312-59)
L4
1456cc/1.5L
2.874" (73mm) Bore
1987-94 SOHC 12 valve 3E, 3EE, 3FE Series Eng.
Corolla, Tercel
Intake seat inner (rear)
INT
31047
(1062-50)
INT
Intake seat outer (front)
31617
(1250-53)
EXH
31058
(1312-68)
L4
1493cc/1.5L
3.016" (76.6mm) Bore
INT
1967-78 OHV 4P Series Eng.
30649
(1625-4)
EXH
30649
VALVE SEAT
(1625-4)
L4
1497cc/1.5L
2.913" (74mm) Bore
INT
1992-98 DOHC 16 valve 5EFE Series Eng.
Paseo
31050
(1187-52)
EXH
31047
(1062-50)
L4
1587cc/1.6L
3.189" (81mm) Bore
INT
1983-88 SOHC 4AC, 4ALC Series Eng.
Corolla, FX
30717
(1500-71)
EXH
31624
(1312-59)
1985-91 DOHC 16 valve 4AGE, 4AGEC, 4AGELC
& 4AGZE Supercharged Series Eng.
Celica, Corolla, FX-16, MR2
INT
31619
(1250-54)
EXH
31604
(1125-51)
252
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
TOYOTA (CONT'D)
L4
1587cc/1.6L
3.189" (81mm) Bore
INT
1988-97 DOHC 16 valve 4AF, 4AFE Series
Eng. Celica, Corolla, MR2
31619
1.257
1.01
.257
1.181
1.0690
0.790
.260
.967
1.6929
1.339
.325
1.615
1.5050
1.140/1.250
.325
1.416
1.257
1.01
.257
1.221
1.0690
0.790
.260
.965
1.6929
1.339
.325
1.615
1.5050
1.140/1.250
.325
1.416
1.6300
1.348
.219
1.3820
1.022
.230
1.7550
1.430
.215
1.690
1.4445
1.100
.227
1.340
1.7550
1.500
.250
1.654
1.4440
1.230
.250
1.378
1.7550
1.360
.315
1.614
1.5680
1.188
.313
1.416
1.7550
1.438
.250
1.614
1.5050
1.250
.250
1.416
1.8180
1.500
.250
1.5680
1.250
.250
1.6925
1.344
.313
1.575
1.4445
1.120
.300
1.339
1.6925
1.344
.313
1.575
1.5060
1.200/1.240
.315
1.417
1.4433
1.059
.254
1.318
1.2559
.996
.254
1.140
1.3820
1.102/1.160
.260
1.260
1.0690
0.790
.260
.965
1.1940
0.905
.257
1.062
(1250-54)
EXH
31047
(1062-50)
L4
1588cc/1.6L
3.346" (85mm) Bore
INT
1971-79 OHV 2T, 2TC Series Eng.
Carina, Corolla
31185
(1687-50)
EXH
30105
(1500-65)
L4
1762cc/1.8L
3.189" (81mm) Bore
INT
1993-98 DOHC 16 valve 7AFE Series Eng.
Corolla
31619
(1250-54)
EXH
31047
(1062-50)
L4
1770cc/1.8L
3.346" (85mm) Bore
INT
1980-82 OHV 3TC Series Eng.
Corolla
31185
(1687-50)
EXH
30105
(1500-65)
L4
1839cc/1.8L
3.27" (83mm) Bore
L4
1858cc/1.9L
3.385" (86mm) Bore
1984-85 SOHC 1CTLC Series Turbo Diesel Eng.
Camry, Corolla
INT
EXH
1969-71 SOHC 8R, 8RC Series Eng.
Celica, Corona, Corona MK II, HiLux
Pick-up
30857
(1625-11)
INT
31636
71636
(1375-54)
(1375-54N)
31713
(1750-57)
EXH
31654
(1437-64)
L4
1897cc/1.9L
3.464" (88mm) Bore
1965-70 OHV 3R, 3RB, 3RC Series Eng.
Corona, Crown. Truck: HiLux Pick-up,
Stout
INT
30659
(1750-1)
EXH
31067
(1437-54)
L4
1968cc/2.0L
3.484"(88.5mm) Bore
1972-74 SOHC 18RC Series Eng.
Celica, Corona, Corona MK II, HiLux
Pick-up.
INT
31712
(1750-58)
EXH
30839
(1562-34)
(Replacement seat for Heads w Cast
Integral Seat)
INT
30656
(1750-4)
EXH
30712
(1500-3)
L4
1994cc/2.0L
3.31" (88mm) Bore
INT
1967-88 OHV 5R Series Eng.
30672
(1812-5)
EXH
30645
(1562-7)
INT
1983-86 SOHC 2SELC Series Eng.
Camry, Celica
30559
(1687-4)
EXH
31647
L4
1998cc/2.0L
3.386" (86.1mm) Bore
INT
1984-85 OHV 3YEC Series Eng.
Toyota Van
30559
(1687-4)
EXH
31241
(1500-58)
1986-95 DOHC 16 valve 3SGELC & 3SGTE
Turbo (88-95) Series Eng. Celica, MR2
INT
EXH
INT
1987-99 DOHC 16 valve 3SFE Series Eng.
Camry, Celica, MR2, RAV 4
31107
(1437-67)
31100
71100
(1250-55)
(1250-55N)
30238
(1375-56)
EXH
31047
(1062-50)
(O.E. replacement exh. seat w 1.062
vl. hd)
253
EXH
31146
(1187-51)
VALVE SEAT
(1437-66)
L4
1995cc/2.0L
3.31" (84mm) Bore
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
TOYOTA (CONT'D)
L4
2164cc/2.2L
3.429" (87mm) Bore
INT
1989-99 DOHC 16 valve 5SFE Series Eng.
Camry, Celica, MR2
30238
1.3820
1.102/1.160
.260
1.260
1.1940
0.905
.257
1.062
1.7570
1.500
.255
1.674
1.4433
1.059
.254
1.379
1.8195
1.405/1.632
.315
1.692
1.5070 1.210/1.320
.315
1.419
1.6925
1.344
.313
1.575
1.5060
1.200/1.240
.315
1.417
1.7570
1.360
.315
1.576
1.5690
1.125
.313
1.333
1.9440
1.573
.379
1.770
1.5685
1.255/1.372
.319
1.457
1.5695
1.265/1.320
.280
1.417
1.3190
1.042
.238
1.201
1.5690
1.300
.256
1.417
1.3190
1.042
.238
1.201
1.7570
1.500
.255
1.674
1.4433
1.059
.254
1.379
1.3820
1.059
.254
1.299
1.1945
0.935
.235
1.074
1.7570
1.360
.315
1.576
1.5690
1.125
.313
1.333
1.6320
1.250
.313
1.494
1.4440
1.100
.315
1.299
1.5690
1.300
.256
1.476
1.3190
1.042
.238
1.201
1.1945
0.935
.235
1.074
1.7570
1.410/1.560
.315
1.655
1.4440
1.100
.315
1.299
(1375-56)
EXH
31146
(1187-51)
L4
2188cc/2.2L
3.543" (90mm) Bore
L4
2189cc/2.2L
3.484"(88.5mm) Bore
INT
1981-83 SOHC L Series Diesel Eng.
Toyota Truck: Pick-up
31720
(1750-50)
EXH
INT
1975-80 SOHC 20R Series Eng.
Celica, Corona, HiLux Pick-up
31107
71107
(1437-67)
(1437-67N
31243
(1812-53)
EXH
30191
(1500-61)
L4
2237cc/2.3L
3.58" (91mm) Bore
INT
1986-90 OHV 4Y, 4YEC Series Eng.
Forklift & Industrial, Toyota Van
30559
(1687-4)
EXH
31241
(1500-58)
L6
2253cc/2.3L
2.952" (75mm) Bore
INT
1967-72 SOHC 2M Series Eng.
Corona MK II, Crown
31717
(1750-59)
EXH
31163
(1562-53)
L4
2367cc/2.4L
3.620" (92mm) Bore
L4
2438cc/2.4L
3.740" (95mm) Bore
1981-96 SOHC 22R, 22RE (89-96), 22REC &
22RTEC Turbo (86-88) Series Eng.
Celica, Corona, HiLux Pick-up, 4-Runner
1991-99 DOHC 16 valve 2TZFE & 2TZFZE (94-97)
Supercharged Series Eng. Previa,
Previa All-Trac
1995-99 SOHC 16 valve 2RZFE Series Eng.
Previa, Previa All-Trac, Tacoma Pick-up
INT
31281
(1937-52)
EXH
INT
31199
71199
(1562-67)
(1562-67N)
31286
(1562-66)
EXH
INT
30779
70779
(1312-67)
(1312-67N)
31080
(1562-76)
EXH
30779
(1312-67)
L4
2446cc/2.5L
92mm Bore
V6
2507cc/2.5L
3.45" (87.5mm) Bore
INT
1984-87 SOHC 2L, 2LT Series Diesel & Turbo
Diesel Eng. HiLux Diesel Pick-up
31720
(1750-50)
EXH
INT
1988-91 DOHC 24 valve 2VZFE Series Eng.
Camry, Lexus ES250
31107
71107
(1437-67)
(1437-67N)
31102
(1375-50)
EXH
31868
VALVE SEAT
(1187-53)
L6
2563cc/2.6L
3.149" (80mm) Bore
INT
1971-79 SOHC 4M Series Eng.
Corona, Corona MKII, Crown
31717
(1750-59)
EXH
31163
(1562-53)
INT
1978-80 SOHC 4ME Series Eng.
Cressida, Supra
30663
(1625-52)
EXH
31329
(1437-56)
L4
2693cc/2.7L
3.740" (95mm) Bore
1994-99 DOHC 16 valve 3RZFE Series Eng.
Truck: T-100, Tacoma 1/2 Ton Pick-up
Exhaust seat for years 94-95
INT
31080
(1562-76)
EXH
30779
(1312-67)
EXH
Exhaust seat for years 96-99
31868
(1187-53)
L6
2759cc/2.8L
3.270" (83mm) Bore
INT
1981-82 SOHC 5ME Series Eng.
Cressida, Supra
30165
(1750-63)
EXH
31329
(1437-56)
254
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
TOYOTA (CONT'D)
L6
2759cc/2.8L
3.270" (83mm) Bore
1982-88 DOHC 24 valve 5MGE Series Eng.
Cressida, Supra
INT
31728
1.8195
1.450
.295
1.732
1.5070
1.182
.275
1.417
1.7550
1.375
.313
1.5680
1.250
.250
1.3195
1.070
.257
1.260
1.1940
0.934
.260
1.083
1.7570
1.410/1.560
.315
1.654
1.5695
1.180
.316
1.378
1.4445
1.150
.257
1.339
1.1945
0.935
.235
1.073
1.4445
1.150
.257
1.339
1.1945
0.935
.235
1.073
1.4445
1.150
.257
1.339
1.2559
.933
.254
1.142
1.4445
1.150
.257
1.339
1.1945
0.935
.235
1.073
1.9420
1.540
.315
1.811
1.6300
1.280
.315
1.478
1.9420
1.540
.315
1.811
1.6300
1.280
.315
1.476
1.4445
1.150
.257
1.319
1.2559
.933
.254
1.102
1.9420
1.540
.315
1.811
1.6300
1.280
.315
1.476
1.5060
1.180/1.280
.214
1.435
1.2560
1.000
.219
1.168
1.5050
1.250
.250
1.438
1.2550
1.055
.250
1.233
(1812-57)
EXH
31668
(1500-72)
L4
2771cc/2.8L
3.660" (93mm) Bore
INT
1976-88 OHV 5P Series Eng.
30654
(1750-9)
EXH
30645
(1562-7)
L6
2954cc/3.0L
3.27" (83mm) Bore
V6
2958cc/3.0L
3.45"(87.5mm) Bore
1986-93 DOHC 24 valve 7MGE, 7MGTE - Turbo
Series Eng. Cressida, Supra
INT
EXH
1988-96 SOHC 3VZE Series Eng.
Truck: T-100 1/2 Ton Pick-up, 4-Runner
31632
(1312-60)
INT
31050
71050
(1187-52)
(1187-52N)
30165
(1750-63)
EXH
31674
(1562-72)
1992-93 DOHC 24 valve 3VZFE Series Eng.
Camry; Lexus ES300
INT
31659
(1437-72)
EXH
31868
(1187-53)
V6
2995cc/3.0L
3.429" (87.5mm) Bore
1994-99 DOHC 24 valve 1MZFE, 1MZEFE Series
Eng. Camry; Lexus ES300
INT
31659
(1437-72)
EXH
31868
(1187-53)
L6
2997cc/3.0L
3.386" (86mm) Bore
V6
3378cc/3.4L
3.68" (93.5mm) Bore
1992-98 DOHC 24 valve 2JZGE & 2JZGTE - Twin
Turbo (94-97) Series Eng. Supra, Supra
Twin Turbo; Lexus GS300, SC300
INT
EXH
INT
1995-99 DOHC 24 valve 5VZFE
T-100 & Tacoma Truck, 4-Runner
31659
(1437-72)
31105
71105
(1250-58)
(1250-58N)
31659
(1437-72)
EXH
31868
(1187-53)
L6
3878cc/3.9L
3.543" (90mm) Bore
INT
1969-75 F Series Eng.
Truck, Land Cruiser & Industrial
31747
(1937-51)
EXH
31685
(1625-58)
L6
3955cc/4.0L
3.70" (94mm) Bore
INT
1988-92 3FE Series Eng.
Truck, Land Cruiser
31747
(1937-51)
EXH
31685
(1625-58)
1990-99 4OHC 32 valve 1UZFE Series Eng.
Lexus LS400, SC400
INT
31659
(1437-72)
EXH
31105
L6
4230cc/4.2L
3.70" (94mm) Bore
INT
1975-87 2F Series Eng.
Truck, Land Cruiser & Industrial
31747
(1937-51)
EXH
31685
(1625-58)
TRIUMPH
L4
1296cc/1.3L
73.6mm Bore
INT
1971-72 OHV Triumph Eng.
Spitfire MK IV
31207
(1500-74)
EXH
31147
(1250-1)
L4
1493cc/1.5L
73.6mm Bore
INT
Spitfire MK IV
30712
(1500-3)
EXH
255
31052
VALVE SEAT
(1250-58)
V8
3969cc/4.0L
3.45" (87.5mm) Bore
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
TRIUMPH (CONT'D)
L4
1998cc/2.0L
90.3mm Bore
INT
TR-7
30678
1.6920
1.375
.250
1.560
1.3800
1.063
.250
1.275
1.6920
1.438
.250
1.562
1.4425
1.125
.250
1.300
1.5050
1.250
.250
1.440
1.3170
1.046
.250
1.258
1.6940
1.375/1.500
.280
1.570
1.5050
1.215/1.275
.280
1.353
1.3820
1.120
.325
1.295
1.4440
1.100
.315
1.168
1.4440
1.140
.305
1.337
1.3190
1.085
.305
1.226
1.4440
1.140
.305
1.337
1.3190
1.085
.305
1.226
1.5050
1.215
.345
1.395
1.3820
1.120
.325
1.260
1.5050
1.215
.345
1.395
1.3820
1.120
.325
1.260
1.6310
1.298
.317
1.572
31314
31186
1.5070
1.260/1.332
.340
1.395
1.6929
1.299
.335
1.650
30718
1.5050
1.215
.345
1.475
1.4440
1.140
.305
1.343
1.3190
1.085
.305
1.232
1.4440
1.140
.305
1.337
1.3190
1.085
.305
1.226
1.6310
1.298
.317
1.544
1.3820
1.120
.325
1.295
(1687-7)
EXH
30788
(1375-7)
L4
2138cc/2.1L
86mm Bore
INT
TR-4, TR-4A
30673
(1687-3)
EXH
30802
(1437-8)
L6
2498cc/2.5L
74.7mm Bore
INT
TR-6, TR-250
30712
(1500-3)
EXH
30736
(1312-9)
V8
3528cc/3.5L
88.9mm Bore
INT
TR-8
30720
(1687-18)
EXH
30015
(1500-50)
VOLKSWAGEN
4 Cyl
1192cc/1.2L
77mm Bore
INT
1960-65 Air-Cooled VW 40 H.P. Eng.
Type I, II Series: Beetle, Transporter,
Microbus
31635
(1375-55)
EXH
31329
(1437-56)
L4
1457cc/1.5L
3.13" (79.5mm) Bore
INT
1978-80 SOHC EH, FX Series VW Eng.
Rabbitt, Scirocco
31643
(1437-50)
EXH
30562
(1312-56)
L4
1471cc/1.5L
3.011" (76.5mm) Bore
INT
1974-80 SOHC CK Series VW Gas (74-77) &
Diesel (77-80) Eng. Dasher, Jetta,
Rabbitt, Scirocco, VW Pick-up
31643
(1437-50)
EXH
30562
(1312-56)
4 Cyl
1493cc/1.5L
83mm Bore
INT
1963-69 Air-Cooled VW 1500 Series Eng.
Type I, II, III Series:
Karmann Ghia, Microbus, Transporter
30718
(1500-63)
EXH
31635
(1375-55)
VALVE SEAT
4 Cyl
1584cc/1.6L
85.5mm Bore
INT
1965-79 Air-Cooled VW 1600 Series Eng.
Type I, II, III Series:
Fastback, Karmann Ghia, Microbus,
Squareback, Transporter
1965-79 1600 Eng. DP-HP w 40mm Intake and
35.5mm Exhaust valve
30718
(1500-63)
EXH
31635
(1375-55)
INT
31218
(1625-56)
EXH
INT
1965-79 1600 Eng. DP-HP w 42mm Intake and
37.5mm Exhaust valve
EXH
(1500-63)
L4
1588cc/1.6L
3.011"(76.5mm) Bore
L4
1588cc/1.6L
3.130"(79.5mm) Bore
1981-92 SOHC CR, CS, CY, JK, MD, ME, MF,
068.D, 068.5, 068A, 068C, Series VW
Diesel Eng. Dasher, Golf, Jetta, Rabbitt.
VW Truck: Pick-up, Vanagon
1975-83 SOHC EE, EJ, FN, YG, YK, 049.6,
827/1600N Series Gas Eng.
Dasher, Rabbitt, Scirocco, VW Pick-up
INT
31643
(1437-50)
EXH
30562
(1312-56)
INT
31643
(1437-50)
EXH
30562
(1312-56)
H4
1679cc/1.7L
3.543" (90mm) Bore
INT
1969-74 OHV Air-Cooled VW Eng.
Type II Series: 411, 412
31218
(1625-56)
EXH
31635
(1375-55)
256
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
VOLKSWAGEN (CONT'D)
L4
1715cc/1.7L
3.130"(79.5mm) Bore
1981-84 SOHC EN, JF, WT Series VW Eng.
Dasher, Jetta, Quantum, Rabbitt,
Scirocco, VW Pick-up
INT
31643
1.4440
1.140
.305
1.337
1.3190
1.085
.305
1.232
1.6320
1.340
.307
1.500/1.579
1.3820
1.120
.325
1.299
1.6320
1.340
.307
1.575
1.4425
1.125
.313
1.300
1.3190
1.045
.316
1.264
1.1320
0.900
.325
1.106
31186
1.6929
1.299
.335
1.614
31658
1.4445
1.142
.336
1.338
1.6310
1.298
.317
1.544
1.4445
1.142
.336
1.338
1.6310
1.298
.317
1.544
1.3820
1.120
.325
1.295
1.6320
1.340
.307
1.575
1.4425
1.125
.313
1.339
1.5695
1.220/1.356
.344
1.475
1.3820
1.120
.325
1.295
1.6300
1.250
.344
1.544
1.3820
1.120
.325
1.295
1.3190
1.045
.316
1.264
1.1320
0.900
.325
1.106
1.6320
1.340
.307
1.575
1.4425
1.125
.313
1.339
1.6320
1.340
.307
1.500
1.3820
1.120
.325
1.299
(1437-50)
EXH
30562
(1312-56)
L4
1780cc/1.8L
3.19"(81mm) Bore
1982-92 SOHC 8 valve 2H, GX, HT, JH, JN, PG, PF,
RD, RV, UM Series Gas & Supercharged
Gas VW Eng. Cabriolet, Carrado,
Fox, Golf, Golf GT, GTI, Jetta, Jetta GLI,
Quantum, Rabbitt, Rabbitt GTI, Scirocco
1982-92 SOHC 8 valve Eng. w 40mm Intake and
33mm Exhaust Valve. 2H, GX, HT, JH,
JN, PG, PF, RD, RV, UM Series. GTI,
Jetta, Scirocco, Golf
1986-89 DOHC 16 valve PL, PS Series VW Eng.
Golf, GTI, Jetta, Scirocco
INT
31692
(1625-50)
EXH
31635
(1375-55)
INT
31692
(1625-50)
EXH
30803
(1437-6)
INT
30563
(1312-64)
EXH
31605
(1125-54)
4 Cyl
1795cc/1.8L
93mm Bore
1974-75 Air-cooled VW Eng. w 41mm Intake and
34mm Exhaust Valve. Type II, 412
INT
EXH
(1437-73)
1974-75 Air-cooled VW Eng. w 39.3mm Intake,
& 34mm Exhaust Valve. Type II, 412
INT
31218
(1625-56)
EXH
31658
(1437-73)
1974-75 Air-Cooled VW Eng. w 39.3mm Intake
and 33mm Exhaust Valve.
INT
31218
(1625-56)
EXH
31635
(1375-55)
H4
1915cc/1.9L
3.70" (94mm) Bore
INT
1983-85 SOHC DH Series VW Eng.
Vanagon
31692
(1625-50)
EXH
30803
(1437-6)
4 Cyl
1970cc/2.0L
3.70" (94mm) Bore
and 33mm Exhaust Valve.
Vanagon Type II Series: Microbus,
Transporter, Vanagon
and 35mm Exhaust Valve. Vanagon
Type II Series: Microbus, Transporter
INT
31292
(1562-54)
EXH
31635
(1375-55)
INT
31684
(1625-28)
EXH
31635
(1375-55)
1990-95 DOHC 16 valve 9A Series VW Eng.
Golf, Golf GTI, Jetta, Jetta GLI, Passat
INT
30563
(1312-64)
31605
(1125-54)
H4
2109cc/2.1L
3.70" (94mm) Bore
INT
1986-92 SOHC MV Series VW Eng.
Vanagon, Vanagon Syncro
31692
(1625-50)
EXH
30803
(1437-6)
L5
2226cc/2.2L
3.19" (81mm) Bore
1985-88 SOHC JT, KX Series 5 Cyl VW Eng.
Quantum, Quantum Syncro
INT
31692
(1625-50)
EXH
31635
(1375-55)
257
VALVE SEAT
EXH
L4
1984cc/2.0L
82.5mm
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
VOLVO
L4
1986cc/2.0L
3.500" (88.9mm) Bore
L4
2127cc/2.1L
3.622" (92mm) Bore
1969-78 B20A, B20B Series Eng.
Volvo Passenger Car: 133, 142, 142S,
144, 144S, 145, 145S, 240, 242, 244, 245,
1800E, 1800ES Series
1970-75 DE Series Turbo Diesel Eng.
Volvo Diesel Passenger Car: 133, 142,
142S, 144S, 145, 145S, 240, 242, 244,
245, 1800E, 1800ES Series
1976-85 SOHC B21, B21F, B21FT Turbo, B21FTITurbo Series Eng. Volvo Passenger
Car: DL, GL, GLT, GT, 240, 240DL,
240GL, 242, 244, 245 Series
INT
EXH
1.7550
1.438
.250
1.655
30802
1.4425
1.125
.250
1.382
1.5060
1.220/1.328
.310
1.3190
1.085
.305
1.8195
1.500/1.555
.278
1.732
1.5050
1.215/1.275
.280
1.378
1.8810
1.625
.281
1.732
1.8195
1.500/1.555
.278
1.732
1.5050
1.215/1.275
.280
1.378
1.8810
1.625
.281
1.732
1.5070
1.220/1.315
.310
1.418
1.3195
1.065
.285
1.221
1.8190
1.500
.250
1.733
1.5690
1.300
.256
1.457
1.8190
1.500
.250
1.733
1.5690
1.300
.256
1.457
1.7550
1.438
.250
1.4425
1.125
.250
1.7550
1.438
.250
1.655
1.4425
1.125
.250
1.382
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.219
1.500
1.8180
1.500/1.625
.219
1.720
1.5680
1.312/1.390
.219
1.500
(1437-8)
INT
31204
(1500-62)
EXH
INT
30562
70562
(1312-56)
(1312-56N)
31285
(1812-55)
EXH
INT
30656
(1750-4)
30015
70015
(1500-50)
(1500-50N)
30683
(1875-4)
L4
2316cc/2.3L
3.78" (96mm) Bore
1983-84 SOHC B23E, B23F, B230F, B23FTTurbo, B230FD, B230FT-Turbo Series
Eng. Volvo Passenger Car: Coupe
Turbo, DL, GL, GT, 240, 240DL, 240GL,
242, 244, 245, 740, 740GL, 740GLE, 760,
780, 940, 940GL, 940GLE, 940SE Series
INT
EXH
INT
31285
(1812-55)
30015
70015
(1500-50)
(1500-50N)
30683
(1875-4)
L6
2383cc/2.4L
3.012"(76.5mm) Bore
V6
2664cc/2.7L
3.46" (88mm) Bore
INT
1980-86 SOHC D24 Diesel, D24T-Turbo Diesel
Series Eng.
Volvo Passenger Car: GL, GLE, 240,
260, 740, 760 Series
1975-79 SOHC B27E, F Series Eng.
Volvo Passenger Car: 260, 262, 264,
265, 265GL, 265GLE Series
30716
(1500-62)
EXH
INT
31630
71630
(1312-62)
(1312-62N)
30672
(1812-5)
EXH
31080
(1562-76)
V6
2849cc/2.9L
3.500" (91mm) Bore
INT
1980-86 SOHC B28F Series Eng.
Volvo Passenger Car: Bertone Coupe,
GLE, 260, 262, 264, 265, 760 Series
30672
(1812-5)
EXH
31080
(1562-76)
L6
2979cc/3.0L
3.500"(88.9mm) Bore
INT
1969-75 B30A, B30E Series Eng.
Volvo Passenger Car: 164, 164E, 165
Series
30656
(1750-4)
EXH
30802
VALVE SEAT
(1437-8)
L6
2980cc/3.0L
3.500"(88.9mm) Bore
INT
1969-75 B30A, B30E, B30F Series Eng.
Volvo Passenger Car: 162, 164,
164E Series
30656
(1750-4)
EXH
30802
(1437-8)
VOLVO MARINE
V8
3.736" Bore
INT
AQ200D, AQ225D Series VolvoVolvo/Penta Marine Eng.
EXH
V8
3.736" Bore
30530
(1812-3)
INT
BB225A, BB225AV Series VolvoVolvo/Penta Marine Eng.
30541
70541
(1562-9)
(1562-9N)
30530
(1812-3)
EXH
258
30541
70541
(1562-9)
(1562-9N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
VOLVO MARINE (CONT'D)
V8
4.000" Bore
INT
AQ260A, AQ290A Series VolvoVolvo/Penta Marine Eng.
EXH
V8
4.000" Bore
31240
2.1300
1.813
.219
1.940
1.5680
1.312/1.390
.219
1.500
2.1310
1.813
.219
1.940
1.5680
1.312/1.390
.219
1.500
1.5680
1.250
.250
1.5675
1.188
.219
1.8180
1.500
.250
1.5675
1.188
.219
1.4425
1.126
.188
1.6300
1.375
.219
1.4425
1.219
.219
1.4425
1.219
.219
2.3820
2.000
.281
1.8810
1.500
.313
2.0060
1.625
.250
1.5680
1.250
.313
2.0060
1.625
.281
1.6920
1.375
.219
1.3800
1.125
.188
2.0060
1.625
.281
1.7550
1.375
.250
2.2560
1.875
.281
1.7550
1.438
.313
30º
1.6300
1.375
.219
30º
1.4425
1.219
.219
30º
1.8810
1.500
.313
(2125-31)
INT
BB260A, BB260AV Series VolvoVolvo/Penta Marine Eng.
30541
70541
(1562-9)
(1562-9N)
31240
(2125-31)
EXH
30541
70541
(1562-9)
(1562-9N)
WAUKESHA (Alpha-Numerically Arranged by Engine Series/Model)
L6
EXH
6B Series Eng.
70645
(1562-7N)
L6
INT
6BK, 6BKH, 6BZ Series
30640
70640
(1562-6)
(1562-6N)
EXH
70711
(1500-1N)
L6
INT
BA, BK, BL, BM Eng. Series
30672
(1812-5)
EXH
70640
(1562-6N)
EXH
CFR-6ZK
71225
(1437-10N)
EXH
F-283-6 Series
70648
(1625-1N)
L4
133ci/2.2L
3.250" Bore
INT
FL, FLJ, FM, FS Series Eng.
31030
71030
(1437-3)
(1437-3N)
EXH
71030
(1437-3N)
L6
6-GAK, 6-GAL, GAKU OEM#73329
INT
30994
70994
(2375-2)
(2375-2N)
EXH
70920
(1875-14N)
INT
6M, OEM#B5746
30724
70724
(2000-13)
(2000-13N)
EXH
70647
(1562-17N)
L6
INT
MS, MZ
30725
70725
(2000-6)
(2000-6N)
EXH
70677
(1687-5N)
EXH
RC
70790
(1375-4N)
30725
70725
(2000-6)
(2000-6N)
EXH
70653
30º
(1750-8N)
L6
INT
SRKR, SRLR OEM#73253C
31252
71252
(2250-2)
(2250-2N)
EXH
70657
(1750-5N)
L6
INT
6TS, 6TL Series Eng.
OEM#B-5685B (int)
and B-6374 (exh)
EXH
30648
70648
(1625-1)
(1625-1N)
71031
(1437-2N)
L4
EXH
VI OEM#65425A
70920
(1875-14N)
259
VALVE SEAT
INT
SRK, SRS, SRL
L6
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
WAUKESHA (CONT'D)
L4
INT
VK, VRZG, VRZH
30725
70725
(2000-6)
(2000-6N)
EXH
70672
2.0060
1.625
.281
1.8180
1.500
.250
1.5680
1.312
.219
1.3810
1.125
.266
1.5680
1.312
.219
1.5050
1.250
.250
1.8180
1.500
.219
1.6300
1.375
.219
1.5680
1.312
.219
1.2560
1.000
.219
1.7550
1.375
.188
1.6310
1.375
.188
(1812-5N)
L4
155ci/2.5L
3.625" Bore
INT
VRD 155, VRD 155D - Diesel
Series Eng.
30643
70643
(1562-1)
(1562-1N)
EXH
71157
(1375-5N)
INT
VRG155 Series Eng.
180GKB, 180GKBC, 180GKBU
30643
70643
(1562-1)
(1562-1N)
EXH
70712
(1500-3N)
L4
220ci/3.6L
98mm Bore
INT
VRD220 Series Diesel Eng.
30668
70668
(1812-2)
(1812-2N)
EXH
70648
(1625-1N)
L6
232ci/3.8L
3.625" Bore
INT
VRD 232 Series Diesel Eng.
30643
70643
(1562-1)
(1562-1N)
EXH
71147
(1250-1N)
L6
283ci/4.6L
3.875" Bore
INT
31711
71711
(1750-29)
(1750-29N)
EXH
71046
(1625-33N)
L6
310ci/5.1L
3.875" Bore
INT
31045
71045
(1750-11)
(1750-11N)
EXH
71046
1.7560
1.438/1.500
.188
1.6310
1.375
.188
1.8180
1.500
.219
1.6300
1.375
.219
1.7550
1.500
.219
1.6300
1.375
.219
1.5050
1.250
.219
1.4425
1.125
.250
1.6300
1.375
.219
1.5050
1.250
.219
1.7550
1.500
.219
1.6300
1.375
.219
1.7550
1.500
.219
1.6300
1.375
.219
2.3180
2.000
.250
(1625-33N)
L6
330ci/5.4L
98mm Bore
INT
30668
70668
(1812-2)
(1812-2N)
EXH
70648
(1625-1N)
L4
220ci/3.6L
98mm Bore
INT
VRG 220 Series Gas Eng.
30658
70658
(1750-2)
(1750-2N)
EXH
70648
(1625-1N)
VALVE SEAT
L6
232ci/3.8L
3.625" Bore
L6
265ci/4.3L
3.750" Bore
INT
EXH
INT
30711
70711
(1500-1)
(1500-1N)
30802
70802
(1437-8)
(1437-8N)
30648
70648
(1625-1)
(1625-1N)
EXH
70711
(1500-1N)
L6
283ci/4.6L
3.875" Bore
INT
30658
70658
(1750-2)
(1750-2N)
EXH
70648
(1625-1N)
L6
310ci/5.1L
3.875" Bore
INT
VRG 310 Series Eng.
EXH
30658
70658
(1750-2)
(1750-2N)
70648
(1625-1N)
6WAKD (Supercharged) OEM#152512
1197-D OEM#152511
EXH
260
70991
(2312-9N)
DIA.
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
WAUKESHA (CONT'D)
L4
186ci/3.0L
3.625" Bore
INT
X, XA, XAH, XAK, XAL Series Eng.
30648
70648
(1625-1)
(1625-1N)
EXH
70648
1.6300
1.375
.219
1.6300
1.375
.219
1.5050
1.250
.188
2.0060
1.625
.281
2.0060
1.625
.281
1.8180
1.500
.250
1.8180
1.438
.219
2.2560
1.875
.281
2.0060
1.625
.250
2.0060
1.625
.281
1.5680
1.250
.313
2.0060
1.750
.219
1.7550
1.500
.219
2.0060
1.625
.313
1.8810
1.625
.219
2.1300
1.812
.250
1.8180
1.500
.250
2.1925
1.875
.250
2.1935
1.875
.281
1.7570
1.375
.375
1.2550
1.000
.250
1.8800
1.500
.375
1.5050
1.250
.219
1.2560
1.000
.219
1.5050
1.250
.219
1.1940
.938
.250
1.5680
1.312
.219
1.5060
1.250
.250
(1625-1N)
L4
EXH
XBKH OEM#B-9542
70710
(1500-13N)
EXH
XL
70725
(2000-6N)
L4
INT
4-55
30725
70725
(2000-6)
(2000-6N)
EXH
70672
(1812-5N)
L6
EXH
6-90 OEM#B-8382
71269
30º
(1812-17N)
INT
6-110 OEM#76408
31252
71252
(2250-2)
(2250-2N)
EXH
70724
(2000-13N)
EXH
6-125
70725
(2000-6N)
L4
EXH
130 Series Eng.
70647
(1562-17N)
L6
426ci/7.0L
4.250" Bore
INT
135DK, 135DKB Series Eng.
OEM#11999 and OEM#119453
30691
70691
(2000-1)
(2000-1N)
EXH
70658
(1750-2N)
L6
INT
135GK, GS, GZ Series Eng.
OEM#119917 and OEM#119984
OEM#151255
30727
70727
(2000-14)
(2000-14N)
EXH
70681
(1875-6N)
L6
525ci/8.6L
4.500" Bore
1940-44 140GK, 140GS, 140HK, 140HS, 150GK
Series Eng.
INT
30557
70557
(2125-1)
(2125-1N)
EXH
70672
(1812-5N)
1948-73 140GS, 140HS, 140HK, 140GZ, 140GZB,
150GK
OEM#74592
INT
INT
31499
71499
(2187-12)
(2187-12N)
30984
70984
(2187-4)
(2187-4N)
EXH
71129
(1750-0N)
L4
160, 180, 185 Series Eng.
OEM#41177
EXH
175 OEM#44958
EXH
71053
(1250-3N)
INT
180DAC, 180DLC OEM#118680
185DLC OEM#118679
30711
70711
(1500-1)
(1500-1N)
EXH
71147
(1250-1N)
L4, L6
INT
180-185DSB OEM#11915
30711
70711
(1500-1)
(1500-1N)
EXH
71145
(1187-5N)
L4, L6
180GKB, 180GKBC, 190GLB Series Eng.
OEM#155003
INT
EXH
30643
70643
(1562-1)
(1562-1N)
70712
(1500-3N)
261
VALVE SEAT
L4, L6
71091
(1875-0N)
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
WAUKESHA (CONT'D)
L4, L6
INT
180GL Series Eng.
31030
71030
(1437-3)
(1437-3N)
EXH
71030
1.4425
1.188
.219
1.4425
1.188
.219
1.4425
1.125
.250
1.3800
1.125
.188
1.2560
0.938
.188
1.5050
1.250
.219
1.3800
1.125
.188
1.4440
1.188
.250
1.2550
1.000
.250
1.5050
1.250
.219
1.2560
1.000
.219
1.4425
1.188
.219
1.4425
1.188
.219
1.3800
1.125
.188
1.2560
0.938
.188
1.5050
1.250
.219
1.3800
1.125
.188
1.4440
1.188
.250
1.4425
1.125
.313
1.4421
1.188
.250
1.6300
1.375
.219
1.3800
1.125
.219
1.5060
1.250
.250
1.5050
1.250
.219
1.3800
1.125
.188
2.0680
1.688
.281
1.6920
1.438
.219
1.8180
1.563
.219
1.6300
1.375
.219
(1437-3N)
L4, L6
EXH
180GLB Series Eng.
OEM#164763-B
180GLB Series Eng.
180GLB to Serial #6502
(H.D. # 190302B) OEM#117891-A
70802
(1437-8N)
INT
30790
70790
(1375-4)
(1375-4N)
EXH
71152
(1250-2N)
INT
180GLB after Serial #6503
(Head #190302D) OEM#155003
30711
70711
(1500-1)
(1500-1N)
EXH
70790
(1375-4N)
L4, L6
EXH
180GS Series Eng. OE#152328
71161
(1437-5N)
L4, L6
EXH
185 Series Eng. OE#41177
71053
(1250-3N)
L6
194ci/3.2L
3.313" Bore
INT
185DAC Series Eng.
30711
70711
(1500-1)
(1500-1N)
EXH
71147
(1250-1N)
L4, L6
INT
185GL Series Eng.
31030
71030
(1437-3)
(1437-3N)
EXH
71030
(1437-3N)
L4, L6
INT
185GLB Series Eng.
185GLB to Serial # 6502
(Head # 190302B)
30790
70790
(1375-4)
(1375-4N)
EXH
71152
(1250-2N)
INT
185GLB after Serial #6503
(Head #190302D)
30711
70711
(1500-1)
(1500-1N)
EXH
70790
(1375-4N)
L4, L6
EXH
185GS Series Eng. OEM#152328
71161
(1437-5N)
EXH
190 Series Eng. OEM#117159
70803
(1437-6N)
EXH
190DLB OEM#117640
71402
(1437-5N)
VALVE SEAT
L6
INT
190DLB, 190DLC OEM#118664
OEM#118665
30648
70648
(1625-1)
(1625-1N)
EXH
70558
(1375-1N)
EXH
190GLB Series OEM#155003
70712
(1500-3N)
L6
INT
190GS, 190GL, 190GK, 190KL Series
Eng.
30711
70711
(1500-1)
(1500-1N)
EXH
70790
(1375-4N)
L6
INT
195 Series Eng.
31768
71768
(2062-8)
(2062-8N)
EXH
70664
(1687-2N)
L6
302ci/5.0L
4.000" Bore
INT
195DLC & 197D Series Eng.
OEM#151241 and OEM#118664-C
EXH
30667
70667
(1812-4)
(1812-4N)
70648
(1625-1N)
262
DIA.
VALVE SEAT INSERTS
DISPLACEMENT
ENG/ CYL /
BORE SIZE
APPLICATION
YEAR
DURA-BOND PART #
GOLD
DIAMOND
series
series
VALVE
HEAD
O.D.
I.D.
DEPTH
DIA.
WAUKESHA (CONT'D)
L6
320ci/5.2L
4.125" Bore
INT
195GK, 195GKA Series Eng.
OEM# 118941
31768
71768
(2062-8)
(2062-8N)
2.0680
1.688
.281
1.6920
1.438
.219
1.5050
1.250
.219
70790
1.3800
1.125
.188
31157
71157
1.3810
1.125
.266
1.313
(1375-5)
(1375-5N)
1.3810
1.125
.266
1.313
1.3810
1.125
.266
1.313
1.3810
1.125
.266
1.313
1.3810
1.125
.266
1.313
1.3810
1.125
.266
1.313
1.3810
1.125
.266
1.313
1.3810
1.125
.266
1.313
1.3810
1.125
.266
1.313
1.3810
1.125
.266
1.313
1.3810
1.125
.266
1.313
1.3810
1.125
.266
1.313
1.3810
1.125
.266
1.313
1.3810
1.125
.266
1.313
1.6300
1.375
.250
1.562
1.3810
1.125
.266
1.313
1.6300
1.375
.250
1.562
1.3810
1.125
.266
1.313
1.5050
1.140/1.250
.325
1.423
1.3195
1.070/1.133
.330
1.226
EXH
70664
(1687-2N)
L6
302ci/5.0L
4.000" Bore
INT
195GL Series Eng.
30711
70711
(1500-1)
(1500-1N)
EXH
WILLYS (SEE AMC - CHRYSLER - JEEP)
WISCONSIN
1 Cyl
17.8ci
2.875" Bore
INT
AK, AKN Series Eng.
EXH
71157
(1375-5N)
1 Cyl
19.3ci
2.750" Bore
INT
AD, ADH Series Eng.
31157
71157
(1375-5)
(1375-5N)
EXH
71157
(1375-5N)
1 Cyl
23.0ci
3.000" Bore
INT
AE, AEH, AEM, AEN Series Eng.
31157
71157
(1375-5)
(1375-5N)
EXH
71157
(1375-5N)
2 Cyl
45.9ci
3.000" Bore
INT
TE, TED Series Eng.
31157
71157
(1375-5)
(1375-5N)
EXH
71157
(1375-5N)
2 Cyl
53.9ci
3.250" Bore
INT
TF, TFD, TJD, TH,THD
31157
71157
(1375-5)
(1375-5N)
EXH
71157
(1375-5N)
L4
91.9ci/1.5L
3.000" Bore
INT
VE4, VE41, VE4D
31157
71157
(1375-5)
(1375-5N)
EXH
71157
(1375-5N)
L4
108ci/1.8L
3.250" Bore
VF4, VF4D, VH4, VH4D, VH4DM Series
Eng.
INT
31157
71157
(1375-5)
(1375-5N)
EXH
71157
(1375-5N)
L4
154ci/2.5L
INT
V460D, V461D Series Eng.
30646
70646
(1625-2)
(1625-2N)
L4
177ci/2.9L
3.750" Bore
INT
V465 Series Eng.
30646
70646
(1625-2)
(1625-2N)
EXH
71157
(1375-5N)
YUGO
L4
1116cc/1.1L
73mm Bore
INT
1986-88 GL, GV, GVL, GVS Series
30105
(1500-65)
EXH
31631
(1312-54)
263
VALVE SEAT
71157
(1375-5N)
EXH
UNIVERSAL VALVE SEAT ASSORTMENT
VALVE SEAT
UNIVERSAL ASSORTMENT
DECIMAL
Part Number
30000 70000
39006 79006
39007 79007
39008 79008
39009 79009
39010 79010
39011 79011
39012 79012
39013 79013
39014 79014
39015 79015
39016 79016
39017 79017
39018 79018
39019 79019
39020 79020
39021 79021
39023 79023
39024 79024
39025 79025
39026 79026
39027 79027
39028 79028
39029 79029
39030 79030
39031 79031
39033 79033
39035 79035
39036 79036
39037 79037
39038 79038
39039 79039
39040 79040
39041 79041
39042 79042
39043 79043
39044 79044
39045 79045
39046 79046
39047 79047
39048 79048
39049 79049
39050 79050
39051 79051
39052 79052
39053 79053
39055 79055
39056 79056
39057 79057
39058 79058
39059 79059
39060 79060
39061 79061
39062 79062
39063 79063
39065 79065
39066 79066
39067 79067
39068 79068
39069 79069
39070 79070
39071 79071
Actual
OD
ID
1.1024
1.1220
1.1417
1.1614
1.1811
1.1811
1.2008
1.2205
1.2205
1.2402
1.2598
1.2598
1.2795
1.2992
1.2992
1.3189
1.3386
1.3583
1.3780
1.3780
1.3976
1.4173
1.4173
1.4370
1.4567
1.4764
1.4961
1.5157
1.5354
1.5354
1.5551
1.5748
1.5748
1.5945
1.6142
1.6142
1.6339
1.6535
1.6535
1.6732
1.6929
1.6929
1.7126
1.7323
1.7323
1.7520
1.7520
1.7717
1.7717
1.7913
1.8110
1.8110
1.8307
1.8504
1.8504
1.8701
1.8898
1.8898
1.8898
1.7126
1.7520
0.866
0.866
0.906
0.906
0.906
0.787
0.906
0.945
0.827
0.945
0.984
0.866
0.984
1.023
0.906
1.023
0.945
1.063
1.102
0.984
1.102
1.142
1.024
1.141
1.181
1.181
1.102
1.220
1.260
1.141
1.260
1.260
1.141
1.260
1.299
1.181
1.299
1.338
1.220
1.338
1.378
1.260
1.378
1.417
1.299
1.417
1.181
1.457
1.339
1.457
1.496
1.339
1.496
1.535
1.417
1.535
1.575
1.496
1.457
1.417
1.417
METRIC
Seat
Depth Angle
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.433
.394
.472
.472
.472
.472
.472
.472
.472
.472
.472
.472
.433
.472
.394
.394
Part Number
Actual
Seat
30000 70000
OD
ID Depth Angle
39006 79006 28.00 22.00 10.00
45°
39007 79007 28.50 22.00 10.00
45°
39008 79008 29.00 23.00 10.00
45°
39009 79009 29.50 23.00 10.00
45°
39010 79010 30.00 23.00 10.00
45°
39011 79011 30.00 20.00 10.00
45°
39012 79012 30.50 23.00 10.00
45°
39013 79013 31.00 24.00 10.00
45°
39014 79014 31.00 21.00 10.00
45°
39015 79015 31.50 24.00 10.00
45°
39016 79016 32.00 25.00 10.00
45°
39017 79017 32.00 22.00 10.00
45°
39018 79018 32.50 25.00 10.00
45°
39019 79019 33.00 26.00 10.00
45°
39020 79020 33.00 23.00 10.00
45°
39021 79021 33.50 26.00 10.00
45°
39023 79023 34.00 24.00 10.00
45°
39024 79024 34.50 27.00 10.00
45°
39025 79025 35.00 28.00 10.00
45°
39026 79026 35.00 25.00 10.00
45°
39027 79027 35.50 28.00 10.00
45°
39028 79028 36.00 29.00 10.00
45°
39029 79029 36.00 26.00 10.00
45°
39030 79030 36.50 29.00 10.00
45°
39031 79031 37.00 30.00 10.00
45°
39033 79033 37.50 30.00 10.00
45°
39035 79035 38.00 28.00 10.00
45°
39036 79036 38.50 31.00 10.00
45°
39037 79037 39.00 32.00 10.00
45°
39038 79038 39.00 29.00 10.00
45°
39039 79039 39.50 32.00 10.00
45°
39040 79040 40.00 32.00 10.00
45°
39041 79041 40.00 29.00 10.00
45°
39042 79042 40.50 32.00 10.00
45°
39043 79043 41.00 33.00 10.00
45°
39044 79044 41.00 30.00 10.00
45°
39045 79045 41.50 33.00 10.00
45°
39046 79046 42.00 34.00 10.00
45°
39047 79047 42.00 31.00 10.00
45°
39048 79048 42.50 34.00 10.00
45°
39049 79049 43.00 35.00 10.00
45°
39050 79050 43.00 32.00 10.00
45°
39051 79051 43.50 35.00 10.00
45°
39052 79052 44.00 36.00 10.00
45°
39053 79053 44.00 33.00 10.00
45°
39055 79055 44.50 36.00 11.00
45°
39056 79056 44.50 30.00 10.00
45°
39057 79057 45.00 37.00 12.00
45°
39058 79058 45.00 34.00 12.00
45°
39059 79059 45.50 37.00 12.00
45°
39060 79060 46.00 38.00 12.00
45°
39061 79061 46.00 34.00 12.00
45°
39062 79062 46.50 38.00 12.00
45°
39063 79063 47.00 39.00 12.00
45°
39065 79065 47.00 36.00 12.00
45°
39066 79066 47.50 39.00 12.00
45°
39067 79067 48.00 40.00 12.00
45°
39068 79068 48.00 38.00 11.00
45°
39069 79069 48.00 37.00 12.00
45°
39070 79070 43.50 36.00 10.00
45°
39071 79071 44.50 36.00 10.00
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
264
DURA-BOND VALVE SEAT NUMERICAL LISTING BY PART NUMBER
(1500-50N)
(1500-52N)
(1812-50N)
(1500-54N)
(1500-57N)
(1500-65N)
(1750-67N)
(1875-53N)
(1937-52N)
(1500-63N)
(1750-63N)
(1687-51N)
(1500-61N)
(1250-56N)
(1375-56N)
(1562-2N)
(1625-2N)
(1875-2N)
(1812-3N)
(2125-2N)
(1562-9N)
(1818E-1N)
(1437-1N)
(2125-1N)
(1375-1N)
(1687-4N)
(1937-1N)
(1312-56N)
(1312-64N)
(1750-2N)
(1562-6N)
(1630E-1N)
(1562-1N)
Cutter
OD
1 1/2
1 1/2
1 13/16
1 1/2
1 1/2
1 1/2
1 3/4
1 3/4
1 7/8
1 15/16
1 1/2
1 3/4
1 11/16
1 1/2
1 1/2
1 1/4
1 1/4
1 3/8
1 9/16
1 5/8
1 7/8
1 13/16
2 1/8
1 9/16
1 13/16
1 7/16
2 1/8
1 3/8
1 11/16
1 15/16
1 5/16
1 5/16
1 3/4
1 9/16
1 5/8
1 9/16
(1562-1N+.005)
(1562-1N+.010)
(1562-4N)
1 9/16
(1562-4N+.005)
(1562-4N+.010)
(1562-7N)
(1625-2N)
(1562-17N)
(1625-1N)
9/16
5/8
9/16
5/8
1
1
1
1
1
1
1
1
1
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
(1625-1N+.005)
(1625-4N)
(1625-3N)
(1625-10N)
(1750-7N)
(1750-8N)
(1750-9N)
(1750-3N)
(1750-4N)
(1750-5N)
ID
1.5050
1.5050
1.8190
1.5070
1.5050
1.5050
1.7570
1.7570
1.8820
1.9440
1.5070
1.7570
1.6940
1.5070
1.5070
1.2570
1.2570
1.3820
1.5680
1.6300
1.8800
1.8180
2.1300
1.5680
1.8170
1.4440
2.1300
1.3800
1.6925
1.9440
1.3190
1.3190
1.7550
1.5680
1.6300
1.5680
1.5730
1.5780
1.5680
1.5730
1.5780
1.5680
1.6300
1.5680
1.6300
1.6350
1.6300
1.6300
1.6300
1.7550
1.7550
1.7550
1.7550
1.7550
1.7550
1.215
1.250
1.490
1.180
1.100
1.140
1.385
1.460
1.505
1.575
1.210
1.410
1.385
1.210
1.239
1.022
0.905
1.102
1.312
1.375
1.562
1.500
1.875
1.312
1.562
1.250
1.812
1.125
1.344
1.688
1.085
1.045
1.500
1.250
1.334
1.312
1.312
1.312
1.312
1.312
1.313
1.250
1.375
1.250
1.375
1.375
1.313
1.313
1.313
1.375
1.375
1.375
1.438
1.438
1.438
265
ID Top
Seat
Taper Depth Angle Application
1.275
1.390
1.600
1.318
1.225
1.250
1.559
1.553
1.689
1.719
1.333
1.560
1.520
1.320
1.000
1.160
1.390
1.460
1.625
1.390
1.655
.280
.240
.305
.305
.316
.325
.380
.425
.380
.380
.345
.315
.305
.315
.225
.225
.230
.260
.250
.250
.250
.219
.250
.219
.365
.219
.250
.219
.313
.250
.305
.316
.219
.219
.313
.219
.219
.219
.250
.250
.250
.250
.250
.313
.219
.219
.219
.250
.313
.219
.250
.313
.219
.250
.313
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
GM Truck, Isuzu, Opel
Nissan, GM Car/Truck, Isuzu, Opel
Nissan
Nissan
Universal Ford Truck, Mazda
Universal Fiat, Honda, Mazda
Jaguar
Universal
Jaguar
Toyota
Chrysler
Jaguar, Toyota
Chrysler
Toyota
Universal
Universal
Nissan
Toyota, GM
Universal Ford, GM Car & Truck
Universal
Universal
Universal Ford, GM Car & Truck
Universal
Universal GM, Merc., Volvo Marine
Caterpillar
Universal
Universal
Universal Ford, GM, Ind. Appl
Universal
Universal
Audi, Volkswagen
BMW, Chrysler, Volkswagen
Superceded by (30658, 70658)
Universal Case, Cont., IHC, Minn-Mol
Universal Ford Ind., Tractor, Truck
Universal AMC-Chry., Ford, GM, Ind
Universal AMC-Jeep, John Deere, Ind
Universal. MG, Waukesha
Universal Case, Chry., Hercules, Wisc
Universal GM, Ind & HD
Universal AMC, Case, GM, Chry., Ford
Universal AMC, Case, GM, Chry., Ford
Universal Ford, GM, HD & Ind
Universal Case, Cont., Ford, IHC
Universal
Universal Buda, Ford Ind., Herc., Ind
Universal IHC
Universal Case, Chry., Minn-M, Toyota, Ind
Universal AMC, Ford, GM, Ind Appl
Universal Cat., Chry. Ind., Cont., IHC
Universal Allis-Ch., Buda, Case, Ind. Appl
NUMERICAL LISTING
1
1
1
1
Actual
OD
VALVE SEAT
Part Number Series
30000
70000
30015 (1500-50)
70015
30024 (1500-52)
70024
30030 (1812-50)
70030
30031 (1500-54)
70031
30045 (1500-57)
70045
30105 (1500-65)
70105
30127 (1750-67)
70127
30129
70129
30138 (1875-53)
70138
30141 (1937-52)
70141
30148 (1500-63)
70148
30165 (1750-63)
70165
30190 (1687-51)
70190
30191 (1500-61)
70191
30204
70204
30205
70205
30230 (1250-56)
70230
30238 (1375-56)
70238
30503 (1562-2)
70503
30506 (1625-2)
70506
30509 (1875-2)
70509
30530 (1812-3)
70530
30537 (2125-2)
70537
30541 (1562-9)
70541
30542 (1818E-1)
70542
30556 (1437-1)
70556
30557 (2125-1)
70557
30558 (1375-1)
70558
30559 (1687-4)
70559
30560 (1937-1)
70560
30562 (1312-56)
70562
30563 (1312-64)
70563
30568 (1750-2)
70568
30640 (1562-6)
70640
30642 (1630E-1)
70642
30643 (1562-1)
70643
+5 (1562-1+.005)
+5
+10 (1562-1+.010)
+10
30644 (1562-4)
70644
+5 (1562-4+.005)
+5
+10 (1562-4+.010)
+10
30645 (1562-7)
70645
30646 (1625-2)
70646
30647 (1562-17)
70647
30648 (1625-1)
70648
+5 (1625-1+.005)
+5
30649 (1625-4)
70649
30650 (1625-3)
70650
30651 (1625-10)
70651
30652 (1750-7)
70652
30653 (1750-8)
70653
30654 (1750-9)
70654
30655 (1750-3)
70655
30656 (1750-4)
70656
30657 (1750-5)
70657
NUMERICAL LISTING
VALVE SEAT
Part Number Series
30000
70000
30658 (1750-2)
70658
+5 (1750-2+.005)
+5
30659 (1750-1)
70659
30660 (1750-13)
70660
30661 (1625-9)
70661
30662 (1625-6)
70662
30663 (1625-7)
70663
30664 (1687-2)
70664
30665 (1750-3)
70665
30667 (1812-4)
70667
30668 (1812-2)
70668
30669 (1812-3)
70669
30670 (1687-1)
70670
30671 (1812-1)
70671
+5 (1812-1+.005)
+5
30672 (1812-5)
70672
30673 (1687-3)
70673
30674 (1687-9)
70674
30675 (1687-6)
70675
30676 (1687-11)
70676
30677 (1687-5)
70677
30678 (1687-7)
70678
30679 (1687-8)
70679
30680 (1812-21)
70680
30681 (1875-6)
70681
30682 (1875-1)
70682
30683 (1875-4)
70683
30684 (1875-17)
70684
30685 (1875-18)
70685
30686 (1875-27)
70686
30687 (1875-7)
70687
30688 (1875-15)
70688
30689 (1875-23)
70689
30690 (2000-36)
70690
30691 (2000-1)
70691
30692 (2000-17)
70692
30693 (2000-20)
70693
30694 (2000-18)
70694
30695 (2000-19)
70695
30696 (2000-37)
70696
30697 (2000-28)
70697
30698 (2000-15)
70698
30699 (2000-16)
70699
30700 (2006E-1)
70700
+5 (2006E-1+.005)
+5
+10 (2006E-1+.010) +10
30701 (2000-29)
70701
30702 (2000-4)
70702
30703 (2000-35)
70703
30704 (2006E-3)
70704
30705 (1500-4)
70705
30706 (1500-5)
70706
30707 (1500-8)
70707
30708 (1500-25)
70708
30709 (1500-9)
70709
(1750-2N)
Cutter
OD
1 3/4
(1750-2N+.005)
(1750-1N)
(1750-13N)
(1625-9N)
(1625-6N)
(1625-7N)
(1687-2N)
(1750-3N)
(1812-4N)
(1812-2N)
(1812-3N)
(1687-1N)
(1812-1N)
1 3/4
1 3/4
1 5/8
1 5/8
1 5/8
1 11/16
1 3/4
1 13/16
1 13/16
1 13/16
1 11/16
1 13/16
(1812-1N+.005)
(1812-5N)
(1687-3N)
(1687-9N)
(1687-6N)
(1687-11N)
(1687-5N)
(1687-7N)
(1687-10N)
(1812-21N)
(1875-6N)
(1875-1N)
(1875-4N)
(1875-17N)
(1875-18N)
(1875-27N)
(1875-7N)
(1875-15N)
(1875-23N)
(2000-36N)
(2000-1N)
(2000-17N)
(2000-20N)
(2000-18N)
(2000-19N)
(2000-37N)
(2000-28N)
(2000-15N)
(2000-16N)
(2006E-1N)
1 13/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 13/16
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
(2006E-1N+.005)
(2006E-1N+.010)
(2000-29N)
(2000-4N)
(2000-35N)
(2006E-3N)
(1500-4N)
(1500-5N)
(1500-8N)
(1500-25N)
(1500-9N)
1
1
1
1
1
2"
2"
2"
2"
1/2
1/2
1/2
1/2
1/2
Actual
OD
ID
1.7550
1.7600
1.7550
1.7550
1.6300
1.6300
1.6300
1.6920
1.7550
1.8180
1.8180
1.8180
1.6920
1.8180
1.8230
1.8180
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.8180
1.8810
1.8810
1.8810
1.8810
1.8810
1.8810
1.8810
1.8810
1.8810
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0110
2.0160
2.0060
2.0060
2.0060
2.0060
1.5050
1.5050
1.5050
1.5050
1.5050
1.500
1.500
1.500
1.500
1.250
1.250
1.250
1.438
1.438
1.563
1.500
1.500
1.406
1.563
1.563
1.500
1.438
1.312
1.312
1.312
1.375
1.375
1.375
1.468
1.625
1.625
1.625
1.625
1.625
1.625
1.594
1.594
1.594
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.688
1.688
1.688
1.688
1.688
1.688
1.688
1.688
1.688
1.215
1.125
1.125
1.125
1.125
266
ID Top
Seat
1.625
1.344
.219
.219
.250
.313
.219
.250
.313
.219
.219
.219
.219
.219
.250
.250
.250
.250
.250
.219
.250
.313
.219
.250
.313
.313
.219
.250
.281
.313
.375
.453
.250
.313
.328
.188
.219
.250
.281
.313
.375
.438
.453
.219
.250
.282
.282
.282
.313
.375
.438
.234
.219
.188
.219
.250
.313
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
Universal Chry.-Jeep, Ford, GM, Ind. Appl
Universal Allis-Chalmers, Ind. Appl
Universal Allis-Ch., Buda, Cat., Herc., Ind
Universal
Universal
Universal AMC-Chry., Ford, GM. Ind./HD
Universal AMC-Chry., Ford, GM Ind./HD
Universal Case, Ford, Minn-Mol., Ind. Appl
Universal Cont., Ford Ind. & Truck
Universal Chry, GM. Industrial
Universal Chry, GM. Industrial
Universal Ford, GM. HD & Industrial
Universal Cat., Chry. Ind., Cont., IHC
Universal Caterpillar, Clark, HD & Ind. Appl
Universal Clark Ind. Appl
Universal Hercules Ind. Appl
Universal Buda, Case, John Deere, Wauk
Universal Allis-Ch,Buda,Chry,Cont,Cumm
Universal Allis-Ch., Ford, Mack. Ind./HD
Universal Ford, Mack Truck. Ind./HD
Universal Buda, Case, Cat., Herc., GM, Ford
Universal AMC-Chry., Ford, HD & Ind. Appl
Universal Ford Car & Truck
Universal
Universal
Universal
Universal IHC Ind./HD Appl
Universal
Universal
Universal
Universal AMC-Chry. Ford, GM. Ind. Appl
Universal
Universal Reo Truck. Ind. Appl
Universal IHC. Ind Appl
Universal
Universal
Universal
Universal Chev., GM Car & Truck. Cummins
Universal Cummins HD Appl
Universal Case, Har-Davidson, IHC
Universal
Universal
Universal
Universal
Universal GM
Universal
Universal Hercules Ind. Appl
Universal
Universal
(1500-13N)
(1500-1N)
(1500-3N)
(1500-28N)
(1500-12N)
(1500-0N)
(1500-62N)
(1500-58N)
(1500-63N)
(1562-17N)
(1687-18N)
(1500-11N)
(2000-12N)
(2000-13N)
(2006E-6C)
(2000-3N)
Cutter
OD
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 9/16
1 11/16
1 1/2
1 1/2
2"
2"
2"
2"
(2000-3N+.005)
(2000-14N)
(2000-21N)
(2000-0N)
(2000-27N)
(1562-18N)
(1625-14N)
(1687-13N)
(1312-6N)
(1312-9N)
(1562-46N)
(1812-55N)
(1125-1N)
(1250-3N)
(1312-4N)
(1312-1N)
(1312-67N)
2"
2"
2"
2"
1 9/16
1 5/8
1 11/16
1 5/16
1 5/16
1 5/16
1 5/16
1 9/16
1 13/16
1 1/8
1 1/4
1 5/16
1 5/16
1 5/16
(1348E-1N+.005)
(1375-3N)
(1375-18N)
(1375-7N)
(1375-4N)
(1375-2N)
(1375-0N)
(1437-4N)
(1437-8N)
(1437-65N)
(1437-68N)
(1437-62N)
(1500-6N)
(1500-2N)
(1500-77N)
(1562-8N)
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
9/16
ID
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5680
1.6920
1.5050
1.5050
2.0060
2.0060
2.0060
2.0060
2.0110
2.0060
2.0060
2.0060
2.0060
1.5680
1.6300
1.6920
1.3170
1.3170
1.3170
1.3170
1.4850
1.3050
1.5680
1.8180
1.1300
1.2550
1.3175
1.3190
1.3190
1.3530
1.3800
1.3800
1.3800
1.3800
1.3800
1.3800
1.4425
1.4425
1.4425
1.4440
1.4440
1.4440
1.5050
1.5050
1.5070
1.5680
1.250
1.250
1.250
1.250
1.250
1.250
1.215
1.215
1.215
1.250
1.375
1.215
1.215
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.312
1.375
1.438
1.046
1.046
1.046
1.046
1.260
1.048
1.250
1.500
0.875
1.000
1.000
1.062
1.042
1.087
1.063
1.063
1.063
1.125
1.125
1.125
1.126
1.125
1.125
1.105
1.135
1.200
1.188
1.188
1.175
1.313
267
ID Top
Seat
1.250
.188
.219
.250
.282
.313
.375
.310
.318
.345
.317
.285
.305
.250
.219
.250
.281
.297
.297
.313
.344
.375
.438
.313
.313
.313
.227
.219
.250
.313
.237
.227
.281
.281
.219
.250
.250
.188
.238
.200
.188
.313
.250
.188
.250
.375
.219
.250
.313
.322
.316
.297
.250
.218
.236
.219
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
Universal Waukesha Ind./HD Appl
Universal AMC-Chry, Ford, GM Ind. Appl
Universal IHC, Toyota Ind. Appl
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal Caterpillar, Wauk. Ind./HD Appl
Universal HD & Ind. Appl
Universal Continental, IHC-Navistar
Universal Continental, IHC-Navistar
Universal Waukesha. Ind. Appl
Universal Reo. Ind. Appl
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal AMC-Chry., BMW, Hyund, Mitsu, VW
Universal
Universal
Universal
Universal GMC, Nissan
Universal
Universal
Universal
GM, Toyota
Superceded by (31633+5, 71633+5)
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Ford
Chrysler
General Motors
Universal
Universal
GM, Nissan
IHC
NUMERICAL LISTING
(1437-6N)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Actual
OD
VALVE SEAT
Part Number Series
30000
70000
30710 (1500-13)
70710
30711 (1500-1)
70711
30712 (1500-3)
70712
30713 (1500-28)
70713
30714 (1500-12)
70714
30715 (1500-0)
70715
30716 (1500-62)
70716
30717 (1500-58)
70717
30718 (1500-63)
70718
30719 (1562-17)
70719
30720 (1687-18)
70720
30721
70721
30722 (1500-11)
70722
30723 (2000-12)
70723
30724 (2000-13)
70724
30725 (2000-6)
70725
30726 (2000-3)
70726
+5 (2000-3+.005)
+5
30727 (2000-14)
70727
30728 (2000-21)
70728
30729 (2000-0)
70729
30730 (2000-27)
70730
30731 (1562-18)
70731
30732 (1625-14)
70732
30733 (1687-13)
70733
30734
70734
30735 (1312-6)
70735
30736 (1312-9)
70736
30737
70737
30738
70738
30739
70739
30740 (1562-46)
70740
30741 (1812-55)
70741
30754 (1125-1)
70754
30764 (1250-3)
70764
30774 (1312-4)
70774
30775 (1312-1)
70775
30779 (1312-67)
70779
30785 (1348E-1+.005) 70785
30786 (1375-3)
70786
30787 (1375-18)
70787
30788 (1375-7)
70788
30790 (1375-4)
70790
30791 (1375-2)
70791
30792 (1375-0)
70792
30801 (1437-4)
70801
30802 (1437-8)
70802
30803 (1437-6)
70803
30806 (1437-65)
70806
30809 (1437-68)
70809
30818 (1437-62)
70818
30822 (1500-6)
70822
30823 (1500-2)
70823
30824 (1500-77)
70824
30838 (1562-8)
70838
NUMERICAL LISTING
VALVE SEAT
Part Number Series
30000
70000
30839 (1562-11)
70839
30840 (1562-36)
70840
30841 (1562-12)
70841
30853 (1625-29)
70853
30854 (1625-20)
70854
30855 (1624E-1)
70855
30857 (1625-11)
70857
+6 (1625-11+.006)
+6
30860 (1625-54)
70860
30863 (1628E-1+.005) 70863
30864
70864
30865 (1654E-1+.005) 70865
30868 (1669E-1)
70868
30871 (1687-12)
70871
30872 (1687-15)
70872
30873 (1687-16)
70873
30881 (1687-54)
70881
30882 (1690E-1+.005) 70882
30889 (1750-6)
70889
30891 (1750-12)
70891
30897 (1772E-2+.005) 70897
30899 (1781E-1+.005) 70899
30903 (1812-15)
70903
30904 (1812-7)
70904
30905 (1812-11)
70905
30907 (1812-9)
70907
30915 (1850E-2+.005) 70915
30919 (1875-9)
70919
30920 (1875-14)
70920
30921 (1875-0)
70921
30923 (1875-11)
70923
30932 (1937-4)
70932
30933 (1937-27)
70933
30935 (1937-23)
70935
30936 (1937-17)
70936
30952 (2000-7)
70952
30963 (2062-3)
70963
30964 (2062-1)
70964
30974 (2125-34)
70974
30981 (2165E-1+.005) 70981
30984 (2187-4)
70984
30989 (2250-1)
70989
30991 (2312-9)
70991
30994 (2375-2)
70994
31000 (1812-10)
71000
31002
71002
31003
71003
31004
71004
31005
71005
31006
71006
31007
71007
31008
71008
31009
71009
31010
71010
31011
71011
(1562-11N)
(1562-36N)
(1562-12N)
(1625-29N)
(1625-20N)
Cutter
OD
1 9/16
1 9/16
1 9/16
1 5/8
1 5/8
(1624E-1N)
(1625-11N)
1 5/8
(1625-11N+.006)
(1625-54N)
1 5/8
(1628E-1N+.005)
(1654E-1N+.005)
(1669E-1N)
(1687-12N)
(1687-15N)
(1687-16N)
(1687-54N)
1 11/16
1 11/16
1 11/16
1 11/16
(1690E-1N+.005)
(1750-6N)
(1750-12N)
1 3/4
1 3/4
(1772E-2N+.005)
(1781E-1N+.005)
(1812-15N)
(1812-7N)
(1812-11N)
(1812-9N)
1 13/16
1 13/16
1 13/16
1 13/16
(1850E-2N+.005)
(1875-9N)
(1875-14N)
(1875-0N)
(1875-11N)
(1937-4N)
(1937-27N)
(1937-23N)
(1937-17N)
(2000-7N)
(2062-3N)
(2062-1N)
(2125-34N)
1 7/8
1 7/8
1 7/8
1 7/8
1 15/16
1 15/16
1 15/16
1 15/16
2"
2 1/16
2 1/16
2 1/8
(2165E-1N+.005)
(2187-4N)
(2250-1N)
(2312-9N)
(2375-2N)
(1812-10N)
2 3/16
2 1/4
2 5/16
2 3/8
1 13/16
1 11/32
Actual
OD
1.5680
1.5680
1.5680
1.6300
1.6300
1.6245
1.6300
1.6360
1.6320
1.6340
1.6450
1.6600
1.6690
1.6920
1.6920
1.6920
1.6940
1.6950
1.7550
1.7550
1.7770
1.7860
1.8170
1.8180
1.8170
1.8180
1.8555
1.8800
1.8810
1.8800
1.8800
1.9430
1.9430
1.9430
1.9430
2.0050
2.0680
2.0680
2.1300
2.1700
2.1935
2.2555
2.3180
2.3820
1.8180
.9890
1.0512
1.1858
1.1870
1.2854
1.2854
1.3051
1.3268
1.3268
1.3484
ID
1.188
1.313
1.375
1.250
1.313
1.322
1.348
1.348
1.329
1.348
1.375
1.367
1.372
1.375
1.438
1.438
1.450
1.250
1.313
1.438
1.358
1.476
1.375
1.438
1.438
1.500
1.437
1.500
1.500
1.500
1.562
1.563
1.563
1.688
1.688
1.813
1.812
1.813
1.875
1.732
1.875
1.938
2.000
2.000
1.563
0.787
0.787
0.984
0.984
1.004
1.024
1.102
1.063
1.126
1.126
268
ID Top
Seat
1.524
1.429
1.610
1.875
.313
.188
.218
.375
.395
.375
.218
.218
.280
.365
.250
.312
.272
.375
.156
.188
.297
.375
.250
.203
.394
.311
.313
.250
.313
.312
.394
.250
.313
.375
.312
.250
.219
.188
.219
.219
.250
.250
.219
.433
.281
.188
.250
.281
.313
.236
.224
.248
.248
.315
.335
.276
.315
.250
.250
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
37°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
Universal
Universal
Universal
Universal
Universal, Chrysler
Universal
Universal
Universal
Ford
Superceded by (31681+5, 71681+5)
Universal
Superceded by (31696+5, 71696+5)
IHC, Ford
Universal
Universal
Universal
General Motors
Superceded by (31701+5, 71701+5)
Universal
Universal Detroit Diesel
Superceded by (31227+5, 71227+5)
Superceded by (31257+5, 71257+5)
Universal
Universal
Universal
Universal
Superceded by (31228+5, 71228+5)
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Superceded by (31783+5, 71783+5)
Universal
Universal
Waukesha
Universal
Universal
Metric Universal
Universal
Universal
Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Universal
Universal
Cutter
OD
(1437-56N)
1 7/16
(1640E-1N)
(1437-3N)
(1437-2N)
(1500-10N)
(1562-3N)
(1875-51N)
1
1
1
1
1
7/16
7/16
1/2
9/16
7/8
(1125-52N)
1 3/8
1 5/8
1 11/16
1 1/4
1 15/32
1 3/4
1 5/8
1 1/16
1 1/8
(1187-52N)
1 3/16
(1250-3N)
1 1/4
1 1/4
1 1/4
(1375-1N)
(1625-1N)
(1687-29N)
(1750-11N)
(1625-33N)
(1062-50N)
(1250-52N)
(1299E-1N)
(1312-4N)
(1312-64N)
(1312-68N)
1 5/16
1 5/16
1 5/16
(1339E-2N)
(1375-7N)
(1375-52N)
(1375-64N)
1 7/16
(1457E-2N)
(1500-61N)
(1500-57N)
1 1/2
1 1/2
1 1/2
ID
1.4016
1.4421
1.4823
1.4843
1.5335
1.5827
1.5984
1.6386
1.6417
1.7028
1.4425
1.4425
1.5045
1.5670
1.8820
1.3634
1.5248
1.0437
1.4961
1.6142
1.3800
1.6300
1.6920
1.2550
1.4750
1.7560
1.6310
1.0690
1.1320
1.1819
1.1940
1.2008
1.2550
1.2550
1.2570
1.2992
1.3175
1.3190
1.3190
1.3386
1.3484
1.3661
1.3799
1.3820
1.3820
1.3878
1.4220
1.4440
1.4567
1.4567
1.4646
1.4764
1.5043
1.5051
1.5070
1.142
1.126
1.220
1.220
1.221
1.339
1.339
1.339
1.339
1.417
1.188
1.219
1.188
1.344
1.575
0.984
1.183
0.827
1.181
1.339
1.125
1.375
1.375
1.028
1.240
1.438
1.375
0.790
0.825
0.925
0.934
0.984
1.055
1.000
0.910
0.984
1.000
1.045
0.975
1.024
1.063
1.114
1.063
1.000
1.000
1.102
1.152
1.230
1.102
1.181
1.181
1.220
1.125
1.220
1.100
269
ID Top
Seat
1.692
1.500
.315
.315
.276
.315
.335
.295
.276
.315
.250
.315
.219
.219
.313
.219
.317
.394
.394
.189
.276
.295
.219
.219
.188
.227
.227
.188
.188
.260
.285
.244
.260
.256
.250
.250
.285
.335
.250
.316
.280
.335
.315
.295
.253
.410
.280
.315
.315
.250
.354
.315
.276
.335
.253
.315
.315
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
0°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
Metric Universal
Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Chrysler
Metric Universal
Universal
Universal
Universal
Universal
Universal
Metric Universal
Universal
Universal
Metric Universal
Metric Universal
Universal
Universal
Universal
Universal
Universal
Ford, GM, Mazda, Nissan, Toyota
Chrysler
Universal
GM, Isuzu, Toyota
Metric Universal
Universal
Honda
Universal
Honda, SAAB
Metric Universal
Universal
Universal
Honda
Suzuki
Metric Universal
Universal
Toyota
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Universal
Toyota, Metric Universal
Ford Truck, Mazda
NUMERICAL LISTING
(1437-54N)
1 23/64
1 3/8
1 3/8
1 3/8
Actual
OD
VALVE SEAT
Part Number Series
30000
70000
31012
71012
31013 (1437-56)
71013
31014
71014
31015
71015
31016
71016
31017
71017
31018
71018
31019
71019
31020 (1640E-1)
71020
31021
71021
31030 (1437-3)
71030
31031 (1437-2)
71031
31032 (1500-10)
71032
31033 (1562-3)
71033
31034 (1875-51)
71034
31035
71035
31036
71036
31037
71037
31038
71038
31039
71039
31040 (1375-1)
71040
31041 (1625-1)
71041
31042 (1687-29)
71042
31043
71043
31044
71044
31045 (1750-11)
71045
31046 (1625-33)
71046
31047 (1062-50)
71047
31048 (1125-52)
71048
31049
71049
31050 (1187-52)
71050
31051
71051
31052
71052
31053 (1250-3)
71053
31054 (1250-52)
71054
31055 (1299E-1)
71055
31056 (1312-4)
71056
31057 (1312-64)
71057
31058 (1312-68)
71058
31059 (1339E-2)
71059
31060
71060
31061
71061
31062 (1375-7)
71062
31063 (1375-52)
71063
31064 (1375-64)
71064
31065
71065
31066
71066
31067 (1437-54)
71067
31068 (1457E-2)
71068
31069
71069
31070
71070
31071
71071
31072
71072
31073 (1500-61)
71073
31074 (1500-57)
71074
NUMERICAL LISTING
VALVE SEAT
Part Number Series
30000
70000
31075
71075
31076
71076
31077 (1562-7)
71077
31078
71078
31079 (1562-70)
71079
31080 (1562-76)
71080
31081
71081
31082
71082
31083 (1687-52)
71083
31084
71084
31085
71085
31086 (1744E-1)
71086
31087 (1784E-1)
71087
31088
71088
31089 (1812-6)
71089
31090 (1828E-1)
71090
31091 (1875-0)
71091
31092 (1875-56)
71092
31093
71093
31094 (1339E-2)
71094
31095
71095
31096 (1062-50)
71096
31097 (1125-5)
71097
31098
71098
31099 (1187-52)
71099
31100 (1250-55)
71100
31101 (1312-9)
71101
31102 (1375-50)
71102
31103 (1375-50)
71103
31104 (1562-31)
71104
31105 (1250-58)
71105
31106 (1312-4)
71106
31107 (1437-72)
71107
31108 (1500-6)
71108
31109 (1500-3)
71109
31110 (1732E-1)
71110
31111 (1437-25)
71111
31112 (1562-0)
71112
31113 (1457E-2)
71113
31114
71114
31115 (1562-50)
71115
31116 (1687-51)
71116
31117 (1750-60)
71117
31118 (1937-31)
71118
31121
71121
31122
71122
31123
71123
31124 (2125-32)
71124
31125 (1375-6)
71125
31128 (1750-10)
71128
31129 (1750-0)
71129
31131 (1812-18)
71131
31134 (1937-7)
71134
31135 (2187-1)
71135
31136
71136
Cutter
OD
(1562-7N)
(1562-70N)
(1562-76N)
(1687-52N)
1
1
1
1
9/16
9/16
9/16
9/16
1 11/16
(1744E-1N)
(1784E-1N)
1 25/32
(1812-6N)
1 13/16
(1828E-1N)
(1875-0N)
(1875-56N)
1 7/8
1 7/8
(1339E-2N)
(1062-50N)
(1125-5N)
(1187-52N)
(1250-55N)
(1312-9N)
(1375-50N)
(1375-50N)
(1562-31N)
(1250-58N)
(1312-4N)
(1437-72N)
(1500-6N)
(1500-3N)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1/16
1/8
3/16
3/16
1/4
5/16
3/8
3/8
9/16
1/4
5/16
7/16
1/2
1/2
(1732E-1N)
(1437-25N)
(1562-0N)
1 7/16
1 9/16
(1457E-2N)
(1562-50N)
(1687-51N)
(1750-60N)
(1937-31N)
(2125-32N)
(1375-6N)
(1750-10N)
(1750-0N)
(1812-18N)
(1937-7N)
(2187-1C)
1 9/16
1 11/16
1 3/4
1 15/16
2 1/8
1 3/8
1 3/4
1 3/4
1 13/16
1 15/16
2 3/16
Actual
OD
ID
1.5472
1.5551
1.5673
1.5690
1.5690
1.5690
1.5823
1.6614
1.6940
1.7059
1.7059
1.7421
1.7863
1.7969
1.8170
1.8303
1.8800
1.8820
2.1098
1.3386
1.4567
1.0681
1.1299
1.1933
1.1933
1.2559
1.3181
1.3807
1.3807
1.5681
1.2559
1.3181
1.4433
1.5059
1.5059
1.7333
1.4405
1.5657
1.4577
1.3776
1.5680
1.6920
1.7550
1.9460
1.4252
1.4843
1.3071
2.1300
1.3800
1.7550
1.7570
1.8170
1.9430
2.1940
1.2992
1.260
1.299
1.250
1.230
1.180
1.300
1.180
1.319
1.300
1.384
1.384
1.457
1.406
1.418
1.484
1.437
1.500
1.600
1.697
1.024
1.181
0.871
0.871
0.871
0.933
0.996
1.059
1.059
1.121
1.183
0.933
0.996
1.059
1.183
1.246
1.335
1.186
1.186
1.098
1.124
1.250
1.406
1.438
1.688
1.220
1.220
1.083
1.813
1.062
1.250
1.375
1.500
1.625
1.812
0.984
270
ID Top
Seat
1.500
.315
.335
.253
.310
.305
.256
.413
.413
.360
.354
.250
.315
.288
.390
.250
.375
.375
.252
.402
.335
.315
.254
.191
.254
.254
.254
.254
.254
.254
.254
.254
.254
.254
.254
.254
.372
.313
.376
.352
.313
.280
.305
.302
.379
.295
.276
.276
.313
.219
.250
.375
.375
.312
.250
.177
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
Metric Universal
Metric Universal
Universal
Universal
GM, Isuzu
Toyota
Universal
Metric Universal
AMC
Universal
Universal
Ford, Metric Universal
GM 454 Truck
Universal
Universal
Universal
Universal
Ford
Universal
Ford, GM, Mazda, Nissan, Toyota
Universal
Universal
GM, Isuzu, Toyota
Chrysler, Toyota
Universal
GM Truck
GM Truck
Universal
Toyota, Lexus
Universal
Toyota, Lexus
Universal
Universal
Metric Universal
Universal
Universal
Universal
Universal
Chrysler
Ford
Universal
Metric Universal
Metric Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Metric Universal
(1812-54N)
(1375-62N)
(1562-67N)
(1062-4N)
(1125-10N)
(1187-2N)
(1187-5N)
(1187-51N)
(1250-1N)
(1250-12N)
(1250-3N)
(1250-50N)
(1250-4N)
(1312-10N)
(1312-4N)
(1312-5N)
(1375-10N)
(1375-5N)
(1437-1N)
(1437-3N)
(1437-30N)
(1437-5N)
(1500-10N)
(1562-28N)
(1625-14N)
(1750-17N)
(1937-20N)
(1102E-1N)
(1142E-2N)
(1181E-1N)
(1221E-2N)
(1260E-1N)
(1299E-1N)
(1339E-2N)
(1378E-1N)
(1417E-1N)
(1457E-2N)
(1496E-1N)
(1535E-1N)
(1575E-3N)
(1654E-3N)
(1732E-1N)
(1811E-1N)
(1890E-2N)
(1929E-1N)
1 1/16
1 1/8
1 3/16
1 3/16
1 3/16
1 1/4
1 1/4
1 1/4
1 1/4
1 1/4
1 1/4
1 5/16
1 5/16
1 5/16
1 3/8
1 3/8
1 7/16
1 7/16
1 7/16
1 7/16
1 1/2
1 9/16
1 5/8
1 3/4
1 15/16
Actual
OD
ID
1.8190
1.5690
1.3820
1.5690
2.1654
1.0690
1.1310
1.1940
1.1940
1.1940
1.2560
1.2560
1.2560
1.2560
1.2560
1.2560
1.3190
1.3190
1.3190
1.3810
1.3810
1.4440
1.4440
1.4440
1.4440
1.5060
1.5690
1.6310
1.7560
1.9440
.9449
1.1024
1.1417
1.1811
1.2205
1.2598
1.2992
1.3386
1.3780
1.4173
1.4567
1.4961
1.5354
1.5354
1.5748
1.6142
1.6535
1.6535
1.6929
1.6929
1.7323
1.8110
1.8898
1.9291
1.9291
1.405
1.315
1.100
1.255
1.732
0.781
0.750
0.875
0.938
0.905
1.000
1.000
0.906
1.000
0.875
0.938
1.063
1.000
1.000
0.938
1.125
1.250
1.188
1.250
1.188
1.188
1.125
1.344
1.313
1.500
0.709
0.787
0.827
0.866
0.906
0.945
0.984
1.024
1.024
1.063
1.102
1.142
1.181
1.220
1.181
1.220
1.260
1.299
1.339
1.299
1.339
1.398
1.476
1.516
1.654
271
ID Top
Seat
.315
.270
.300
.320
.472
.250
.250
.250
.250
.257
.219
.313
.313
.250
.250
.188
.313
.250
.313
.313
.266
.219
.219
.313
.250
.313
.313
.313
.313
.313
.256
.315
.335
.335
.335
.335
.335
.335
.354
.354
.354
.354
.354
.335
.374
.335
.374
.335
.325
.335
.374
.394
.394
.394
.315
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
Nissan
Universal
Chrysler, Mitsubishi
Toyota
Metric Universal
Universal
Universal
Universal
Universal
Chrysler, Toyota
Universal
Universal
Universal
Universal
Toyota
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
NUMERICAL LISTING
(1687-50N)
Cutter
OD
1 13/16
1 9/16
1 3/8
1 9/16
VALVE SEAT
Part Number Series
30000
70000
31137 (1812-54)
71137
31138
71138
31139 (1375-62)
71139
31140 (1562-67)
71140
31141
71141
31142 (1062-4)
71142
31143 (1125-10)
71143
31144 (1187-2)
71144
31145 (1187-5)
71145
31146 (1187-51)
71146
31147 (1250-1)
71147
31148 (1250-12)
71148
31149
71149
31150 (1250-3)
71150
31151 (1250-50)
71151
31152 (1250-4)
71152
31153 (1312-10)
71153
31154 (1312-4)
71154
31155 (1312-5)
71155
31156 (1375-10)
71156
31157 (1375-5)
71157
31158 (1437-1)
71158
31159 (1437-3)
71159
31160 (1437-30)
71160
31161 (1437-5)
71161
31162 (1500-10)
71162
31163 (1562-28)
71163
31164 (1625-14)
71164
31165 (1750-17)
71165
31166 (1937-20)
71166
31167
71167
31168 (1102E-1)
71168
31169 (1142E-2)
71169
31170 (1181E-1)
71170
31171 (1221E-2)
71171
31172 (1260E-1)
71172
31173 (1299E-1)
71173
31174 (1339E-2)
71174
31175 (1378E-1)
71175
31176 (1417E-1)
71176
31177 (1457E-2)
71177
31178 (1496E-1)
71178
31179 (1535E-1)
71179
31180
71180
31181 (1575E-3)
71181
31182
71182
31183 (1654E-3)
71183
31184
71184
31185 (1687-50)
71185
31186
71186
31187 (1732E-1)
71187
31188 (1811E-1)
71188
31189 (1890E-2)
71189
31190 (1929E-1)
71190
31191
71191
NUMERICAL LISTING
VALVE SEAT
Part Number Series
30000
70000
31192
71192
31193 (2008E-2)
71193
31194 (2047E-1)
71194
31195 (2087E-2)
71195
31196
71196
31197
71197
31198
71198
31199 (1562-67)
71199
31204 (1500-62)
71204
31205 (1500-77)
71205
31207 (1500-74)
71207
31209 (1750-51)
71209
31210 (1562-66)
71210
31211 (1812-51)
71211
31213 (1687-51)
71213
31214 (1500-63)
71214
31215 (1750-61)
71215
31217 (1875-51)
71217
31218 (1625-56)
71218
31221 (1750-60)
71221
31222 (1562-54)
71222
31223 (1625-62)
71223
31225 (1437-10)
71225
31226
71226
31227 (1772E-2)
71227
+5 (1772E-2+.005)
+5
31228 (1850E-2)
71228
+5 (1850E-2+.005)
+5
31229
71229
31230
71230
31231 (2000-3+.005) 71231
31232
71232
31233
71233
31234 (1625-17)
71234
31235 (1500-69)
71235
31236 (1625-56)
71236
31237 (1812-50)
71237
31238 (1875-19)
71238
31239 (1812-51)
71239
31240 (2125-31)
71240
31241 (1500-58)
71241
31242 (1937-19)
71242
31243 (1812-54)
71243
31244 (1500-73)
71244
31246 (1750-63)
71246
31247 (1500-68)
71247
31248 (1375-22)
71248
31249 (2062-25)
71249
31250 (1937-52)
71250
31251 (1562-74)
71251
31252 (2250-2)
71252
31253 (1562-11)
71253
31254 (1669E-1+.020) 71254
31255 (1500-30)
71255
31256 (1875-51)
71256
Cutter
OD
(2008E-2N)
(2047E-1N)
(2087E-2N)
(1562-67N)
(1500-62N)
(1500-77N)
(1500-74N)
(1750-51N)
(1562-66N)
(1812-51N)
(1687-51N)
(1500-63N)
(1750-61N)
(1875-51N)
(1625-56N)
(1750-60N)
(1562-54N)
(1625-62N)
(1437-10N)
1 9/16
1 1/2
1 1/2
1 1/2
1 3/4
1 9/16
1 13/16
1 11/16
1 1/2
1 3/4
1 7/8
1 5/8
1 3/4
1 9/16
1 5/8
1 7/16
1 41/64
(1772E-2N)
(1772E-2N+.005)
(1850E-2N)
(1850E-2N+.005)
(2000-3N+.005)
(1625-17N)
(1500-69N)
(1625-56N)
(1812-50N)
(1875-19N)
(1812-51N)
(2125-31N)
(1500-58N)
(1937-19N)
(1812-54N)
(1500-73N)
(1750-63N)
(1500-68N)
(1375-22N)
(2062-25N)
(1937-52N)
(1562-74N)
(2250-2N)
(1562-11N)
1 3/4
1 5/8
1 5/8
1 1/2
1 5/8
1 13/16
1 7/8
1 13/16
2 1/8
1 1/2
1 15/16
1 13/16
1 1/2
1 3/4
1 1/2
1 3/8
2 1/16
1 15/16
1 9/16
2 1/4
1 9/16
(1669E-1+.020)
(1500-30N)
(1875-51N)
1 1/2
1 7/8
Actual
OD
ID
1.9685
2.0079
2.0472
2.0866
1.6250
1.5630
1.5000
1.5685
1.5060
1.5060
1.5060
1.7560
1.5685
1.8185
1.6935
1.5060
1.7560
1.8810
1.6310
1.7560
1.5685
1.6310
1.4425
1.6460
1.7717
1.7770
1.8504
1.8555
1.7600
1.7840
2.0110
1.7550
1.6310
1.6310
1.5060
1.6320
1.8195
1.8810
1.8195
2.1310
1.5060
1.9435
1.8195
1.5060
1.7560
1.5060
1.3810
2.0685
1.9435
1.5685
2.2560
1.5685
1.6890
1.5060
1.8820
1.535
1.575
1.614
1.654
1.313
1.250
1.188
1.255
1.220
1.175
1.180
1.594
1.265
1.656
1.390
1.210
1.445
1.575
1.298
1.437
1.220
1.320
1.126
1.312
1.358
1.358
1.437
1.437
1.312
1.469
1.625
1.312
1.280
1.438
1.255
1.298
1.490
1.563
1.530
1.813
1.200
1.750
1.405
1.230
1.410
1.179
1.188
1.750
1.573
1.290
1.875
1.188
1.372
1.313
1.575
272
ID Top
Seat
1.372
1.328
1.235
1.280
1.617
1.450
1.422
1.628
1.710
1.240
1.632
1.560
1.307
1.719
1.345
1.486
1.732
.394
.413
.413
.413
.250
.250
.250
.319
.310
.236
.214
.278
.280
.307
.305
.345
.310
.317
.317
.302
.344
.300
.188
.350
.394
.394
.394
.394
.395
.290
.297
.395
.219
.219
.318
.317
.307
.219
.307
.219
.315
.219
.315
.278
.315
.293
.219
.219
.379
.324
.281
.313
.272
.219
.317
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
60°
37°
45°
45°
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Universal
Universal
Universal
Toyota
GM, Nissan
Nissan
General Motors
Isuzu, Nissan, Toyota
Honda, Isuzu, Nissan
Chrysler
Chrysler
Chrysler
Chrysler
Chrysler
Ford
Ford
Ford, Mazda
Universal
Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Universal
Universal
Superceded by (30726+5, 70726+5)
Universal
Universal
Universal
Nissan
Chrysler
Nissan
Universal
Honda, Isuzu, Nissan
Universal
Subaru
Universal
Nissan
GM
Jaguar, Toyota
Nissan, Infiniti
Universal
Universal
Toyota
Chrysler
Universal
Universal
IHC, Ford
Universal
Chrysler
Cutter
OD
Actual
OD
ID
1 1/2
1 9/16
2 1/16
2 1/4
1 15/16
1.7810
1.7860
1.7910
1.5060
1.5685
2.0685
2.2560
1.9435
1.476
1.476
1.476
1.180
1.255
1.813
1.938
1.625
1.3670
1.108
Radius
.245
45° R Universal
1.4040
1.7570
1.8490
1.5680
1.8560
1.8180
1.6920
2.1600
1.6560
1.3386
1.3976
1.4567
1.4961
1.4016
1.5827
1.6560
2.0060
1.9435
2.1930
1.8175
1.8225
1.8195
1.8195
1.5695
1.5695
1.6945
1.3170
1.5045
1.5070
1.5695
1.3189
1.3976
1.5591
1.5748
2.0500
1.4777
1.3387
1.8190
1.6694
1.7460
2.1050
1.2598
1.3610
1.2670
1.5067
1.4772
1.138
1.400
1.563
1.313
1.635
1.438
1.312
1.800
1.313
1.063
1.142
1.220
1.220
1.142
1.319
1.350
1.563
1.573
1.937
1.625
1.625
1.440
1.500
1.265
1.219
1.390
1.063
1.313
1.210
1.220
1.063
1.161
1.319
1.319
1.575
1.213
1.102
1.496
1.339
1.406
1.765
0.945
1.100
0.982
1.210
1.232
Radius
.254
.420
.365
.280
.280
.219
.375
.300
.375
.394
.394
.394
.394
.374
.374
.375
.313
.379
.250
.219
.219
.315
.278
.280
.317
.305
.219
.188
.345
.344
.354
.374
.374
.354
.340
.154
.177
.157
.177
.375
.375
.354
.306
.320
.344
.335
45° R
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45° R
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
(1781E-1N)
(1781E-1N+.005)
(1781E-1N+.010)
(1500-54N)
(1562-67N)
(2062-1N)
(2250-35N)
(1937-6N)
(1562-37N)
(1812-17N)
(1687-0N)
(2000-11N)
(1937-52N)
(2187-27N)
(1812-12N)
1 3/4
1 27/32
1 9/16
1 13/16
1 11/16
2"
1 15/16
2 3/16
1 13/16
(1812-12N+.005)
(1812-52N)
(1812-55N)
(1562-66N)
(1562-69N)
(1687-51N)
(1312-6N)
(1500-29N)
(1500-63N)
(1562-54N)
1 1/2
273
1.345
1.392
1.895
1.662
Radius
1.515
1.555
1.320
1.480
1.276
1.356
1.220
1.065
1.263
.311
.311
.311
.307
.319
.250
.219
.219
45°
45°
45°
45°
45°
45°
45°
45°
Ford
Ford
Ford
Nissan
Toyota
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Universal
Universal
Toyota
Universal
Universal
Universal
Subaru
Nissan
Isuzu, Nissan, Toyota
Chrysler, Hyundai
Chrysler
Universal
Universal
Chrysler
Ford
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Universal
Universal
Metric Universal
Metric Universal
Metric Universal
Universal
Universal
Metric Universal
Universal
Universal
Chrysler
Universal
NUMERICAL LISTING
(1500-63N)
1 13/16
1 13/16
1 9/16
1 9/16
1 11/16
1 5/16
1 1/2
1 1/2
1 9/16
ID Top
Seat
VALVE SEAT
Part Number Series
30000
70000
31257 (1781E-1)
71257
+5 (1781E-1+.005)
+5
+10 (1781E-1+.010) +10
31258 (1500-54)
71258
31259 (1562-67)
71259
31260 (2062-1)
71260
31261 (2250-35)
71261
31262 (1937-6)
71262
31263
71263
31264
71264
31265
71265
31266
71266
31267 (1562-37)
71267
31268
71268
31269 (1812-17)
71269
31270 (1687-0)
71270
31271
71271
31272
71272
31273
71273
31274
71274
31275
71275
31276
71276
31277
71277
31278
71278
31279
71279
31280 (2000-11)
71280
31281 (1937-52)
71281
31282 (2187-27)
71282
31283 (1812-12)
71283
+5 (1812-12+.005)
+5
31284 (1812-52)
71284
31285 (1812-55)
71285
31286 (1562-66)
71286
31287 (1562-69)
71287
31288 (1687-51)
71288
31289 (1312-6)
71289
31290 (1500-29)
71290
31291 (1500-63)
71291
31292 (1562-54)
71292
31293
71293
31294
71294
31295
71295
31296
71296
31297
71297
31305
71305
31306
71306
31307
71307
31308
71308
31309
71309
31310
71310
31311
71311
31312
71312
31313
71313
31314 (1500-63)
71314
31315
71315
NUMERICAL LISTING
VALVE SEAT
Part Number Series
30000
70000
31316 (1875-51)
71316
31317 (1750-52)
71317
31318 (1562-51)
71318
31319 (1812-52)
71319
31320
71320
31322
71322
31323
71323
31324 (1937-52)
71324
31326 (1500-58)
71326
31327 (1812-52)
71327
31328 (1562-51)
71328
31329 (1437-56)
71329
31330 (2125-33)
71330
31331
71331
31332 (1625-7)
71332
31333 (1250-52)
71333
31334 (1250-52)
71334
31335
71335
31336
71336
31337
71337
31338
71338
31339
71339
31340
71340
31341
71341
31342 (1500-10)
71342
31343 (1500-28)
71343
31344 (1562-17)
71344
31345
71345
31346
71346
31347
71347
31348
71348
31349
71349
31350
71350
31351
71351
31352 (1187-2)
71352
31353
71353
31354
71354
31355
71355
31356
71356
31357
71357
31358
71358
31359 (1250-3)
71359
31360
71360
31361
71361
31362
71362
31363 (1375-2)
71363
31364 (1437-53)
71364
31365
71365
31366
71366
31367
71367
31368
71368
31369
71369
31370
71370
31371 (1600E-1)
71371
31372 (1624E-1)
71372
(1875-51N)
(1750-52N)
Cutter
OD
1 7/8
1 3/4
(1562-51N)
(1812-52N)
1 5/16
1 15/16
(1937-52N)
(1500-58N)
(1812-52N)
(1562-51N)
(1437-56N)
(2125-33N)
(1625-7N)
(1250-52N)
(1250-52N)
1 15/16
1 1/2
1 13/16
1 9/16
1 7/16
2 1/8
1 5/8
1 1/4
1 1/4
1 5/16
(1500-10N)
(1500-28N)
(1562-17N)
(1187-2N)
(1250-3N)
(1375-2N)
(1437-53N)
1 1/2
1 1/2
1 9/16
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
(1600E-1N)
(1624E-1N)
Actual
OD
ID
1.8820
1.7570
1.5700
1.8200
1.3190
1.9460
1.6340
1.9450
1.5060
1.8190
1.5690
1.4440
2.1300
1.7000
1.6320
1.2560
1.2560
1.575
1.457
1.243
1.435
1.123
1.525
1.260
1.570
1.195
1.440
1.245
1.100
1.812
1.413
1.250
0.910
0.910
2.2500
1.6594
1.4008
2.1339
1.8567
1.3190
2.0276
1.5043
1.5043
1.5669
1.1850
.9882
1.2724
1.2992
.9902
1.0559
2.1701
1.1921
1.4791
1.2252
1.8161
1.3504
.9252
1.1661
1.2551
1.2854
1.3433
1.3701
1.3803
1.4421
1.4685
1.5008
1.5051
1.5157
1.5354
1.5354
1.6000
1.6260
ID Top
Seat
1.070
1.070
.320
.312
.354
.314
.300
.425
.394
.380
.315
.316
.352
.315
.375
.375
.312
.281
.288
1.820
Radius
.375
45° R Universal
1.315
1.200
1.693
1.457
0.977
1.726
1.188
1.250
1.250
0.984
0.787
1.024
1.024
0.787
0.807
1.751
0.875
1.187
0.910
1.505
1.063
0.709
0.809
1.000
0.984
1.025
1.142
1.093
1.125
1.142
1.148
1.122
1.220
1.181
1.299
1.282
1.320
Radius
.205
.220
.339
.339
.300
.217
.313
.281
.313
.248
.236
.236
.256
.236
.224
.336
.250
.313
.283
.280
.315
.236
.280
.250
.236
.299
.283
.250
.354
.315
.283
.343
.343
.276
.315
.299
.375
45° R
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
274
1.505
1.340
1.685
1.508
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
Chrysler, Universal
Nissan
Honda
Subaru, Universal
Universal
Universal
Metric Universal
Toyota
Subaru
Subaru
Honda
Toyota
Universal
Universal
Universal
Honda
Honda
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Universal
Universal
Universal
Universal
Universal
Universal
Metric Universal
Metric Universal
Universal
Universal
Metric Universal
Universal
Universal
Universal
Honda, Universal
Metric Universal
Universal
Universal
Universal
Metric Universal
Metric Universal
Ford Tractor
Chrysler
Cutter
OD
(1678E-1N)
(1687-11N)
(1442E-1N)
1 11/16
1 7/16
(1442E-1N+.005)
(1442E-1N+.010)
1 3/4
(1687-40N)
(1875-51N)
1 7/8
1 13/32
(1437-5N)
1 7/16
(1781E-1N)
(1687-4N)
(1437-68N)
1 7/16
ID
1.6772
1.6921
1.7323
1.8150
1.8661
1.8740
1.4803
1.4421
1.4471
1.4521
1.7559
1.0472
1.0689
1.2441
1.3425
1.4764
1.4862
1.5157
1.5256
1.6831
1.6929
1.7618
1.7717
1.8819
1.0551
1.1083
1.3228
1.0335
1.4114
1.4803
2.0673
1.4421
1.2827
1.7815
1.0492
1.6929
1.4429
1.3780
1.2480
1.1496
1.1811
1.4236
1.6201
1.2303
2.0079
1.5410
2.1339
1.5846
1.5059
1.4272
1.6634
1.5630
1.4055
2.0906
1.2992
1.417
1.312
1.417
1.392
1.535
1.435
1.287
1.125
1.125
1.125
1.378
0.827
0.787
1.024
1.083
1.240
1.220
1.220
1.220
1.469
1.385
1.457
1.457
1.575
0.827
0.866
1.082
0.827
1.181
1.200
1.693
1.188
1.063
1.496
0.827
1.350
1.130
1.102
1.024
0.906
0.945
1.152
1.374
0.984
1.575
1.327
1.752
1.358
1.280
1.142
1.378
1.299
1.181
1.693
0.905
275
ID Top
Seat
.315
.315
.276
.297
.315
.382
.283
.250
.250
.250
.295
.236
.236
.236
.236
.335
.335
.335
.335
.295
.315
.335
.335
.315
.244
.256
.287
.177
.244
.276
.354
.250
.236
.315
.217
.315
.315
.197
.256
.256
.335
.250
.256
.315
.217
.256
.287
.287
.295
.315
.315
.339
.339
.394
.315
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
IHC, Metric Universal
Universal
Metric Universal
Universal
Metric Universal
Universal
Universal
Universal
Universal
Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Universal
Metric Universal
Metric Universal
Metric Universal
Chrysler, Metric Universal
Universal
Metric Universal
Universal
Metric Universal
Universal
Universal
Metric Universal
Universal
Metric Universal
Metric Universal
Universal
Chrysler
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Universal
Universal
Metric Universal
Metric Universal
Universal
Universal
Universal
Nissan, Infiniti, Metric Universal
Metric Universal
Metric Universal
Universal
Universal
Metric Universal
Metric Universal
NUMERICAL LISTING
1 1/2
Actual
OD
VALVE SEAT
Part Number Series
30000
70000
31373 (1678E-1)
71373
31374 (1687-11)
71374
31375
71375
31376
71376
31377
71377
31378
71378
31379
71379
31380 (1442E-1)
71380
+5 (1442E-1+.005)
+5
+10 (1442E-1+.010) +10
31381
71381
31382
71382
31383
71383
31384
71384
31385
71385
31386
71386
31387
71387
31388
71388
31389
71389
31390
71390
31391 (1687-40)
71391
31392
71392
31393
71393
31394 (1875-51)
71394
31395
71395
31396
71396
31397
71397
31398
71398
31399
71399
31400
71400
31401
71401
31402 (1437-5)
71402
31403
71403
31404 (1781E-1)
71404
31405
71405
31406 (1687-4)
71406
31407 (1437-68)
71407
31408
71408
31409
71409
31410
71410
31411
71411
31412
71412
31413
71413
31414
71414
31415
71415
31416
71416
31417
71417
31418
71418
31419
71419
31420
71420
31421
71421
31422
71422
31423
71423
31424
71424
31425
71425
NUMERICAL LISTING
VALVE SEAT
Part Number Series
30000
70000
31426
71426
31427
71427
31428
71428
31429
71429
31430
71430
31431
71431
31432
71432
31433
71433
31434
71434
31435 (1187-52)
71435
31436
71436
31437
71437
31438
71438
31439 (1437-68)
71439
31440 (1437-62)
71440
31441
71441
31442
71442
31443
71443
31444
71444
31445
71445
31446
71446
31447
71447
31448
71448
31449
71449
31450
71450
31454
71454
31455 (1625-30)
71455
31456
71456
31457
71457
31459 (1812-0)
71459
31467 (1750-51)
71467
31470 (2250-20)
71470
31471 (1937-8)
71471
31472
71472
31473
71473
31475
71475
31476
71476
31478
71478
31479
71479
31482 (1625-39)
71482
31484 (1500-70)
71484
31485 (1505E-1)
71485
31486 (1562-5)
71486
31488 (1625-18)
71488
31489 (1625-5)
71489
31490 (1687-40)
71490
31491 (1687-33)
71491
31492
71492
31493
71493
31494 (1750-40)
71494
31495 (1875-50)
71495
31496 (1937-3)
71496
31497 (1937-2)
71497
31498 (2125-4)
71498
31499 (2187-12)
71499
Cutter
OD
1 25/32
1 33/64
(1187-52N)
1 15/64
1 3/16
(1437-68N)
(1437-62N)
(1625-30N)
(1812-0N)
(1750-51N)
(2250-20N)
(1937-8N)
1 5/8
1 13/16
1 3/4
2 1/4
1 15/16
2 1/8
(1625-39N)
(1500-70N)
(1505E-1N)
(1562-5N)
(1625-18N)
(1625-5N)
(1687-40N)
(1687-33N)
(1750-40N)
(1875-50N)
(1937-3N)
(1937-2N)
(2125-4N)
(2187-12N)
1 5/8
1 1/2
1 1/2
1 9/16
1 5/8
1 5/8
1 11/16
1 11/16
1 11/16
1 11/16
1 3/4
1 7/8
1 15/16
1 15/16
2 1/8
2 3/16
Actual
OD
ID
1.5413
1.7874
1.1024
1.0898
2.0906
1.1516
1.5209
1.8358
1.2407
1.1933
1.1870
1.6220
1.3307
1.4449
1.4449
2.1102
1.5630
1.4055
1.1732
1.1870
.9843
2.1102
1.2205
1.3445
1.2736
2.1200
1.6300
1.366
1.409
0.807
0.874
1.693
0.874
1.220
1.496
0.941
0.929
0.945
1.319
1.126
1.142
1.220
1.693
1.299
1.181
0.945
0.984
0.787
1.693
0.984
1.102
0.906
1.812
1.312
2.3500
1.970
Radius
.375
45° R Universal
2.2900
1.8175
1.7570
2.2555
1.9430
1.7815
2.1300
2.0902
2.3657
1.900
1.438
1.323
1.875
1.625
1.535
1.906
1.697
2.011
Radius
.375
.375
.280
.313
.375
.295
.234
.382
.350
45° R
45°
45°
45°
45°
45°
45°
45°
45°
Universal
1.6565
1.4055
1.6300
1.5070
1.5070
1.5670
1.6300
1.6300
1.6925
1.6925
1.6945
1.6945
1.7570
1.8820
1.9430
1.9430
2.1305
2.1925
1.246
1.079
1.406
1.203
1.250
1.375
1.313
1.344
1.406
1.500
1.281
1.344
1.531
1.640
1.563
1.625
1.906
1.875
Radius
1.329
.375
.300
.250
.280
.344
.250
.281
.250
.313
.250
.313
.375
.312
.280
.313
.250
.250
.250
45° R
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
Universal
276
ID Top
Seat
1.024
1.490
1.294
.232
.297
.256
.250
.354
.250
.285
.285
.335
.256
.354
.260
.250
.315
.295
.394
.354
.354
.236
.200
.276
.354
.237
.236
.248
.375
.188
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
Universal
Universal
Metric Universal
Universal
Metric Universal
Universal
Universal
Universal
Universal
GM, Isuzu, Toyota
Metric Universal
Universal
Universal
General Motors, Metric Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Universal
Universal
Universal
Universal
General Motors, Universal
Universal
Universal
Metric Universal
Universal
Universal
Komatsu.
Universal
Universal
Nissan, Saab
Caterpillar
Universal
Subaru, Universal
Universal
Universal
Universal
Universal
Universal
Universal
Ford
Universal
Universal
Universal
Waukesha, Universal
Cutter
OD
1 1/2
(1000-1N)
(1062-51N)
(1125-55N)
(1125-51N)
(1125-54N)
(1125-53N)
1
1
1
1
1
2"
1"
1/16
1/8
1/8
1/8
1/8
(1161E-1N)
(1161E-1N+.005)
(1161E-1N+.010)
(1187-1N)
(1187-7N)
(1187-54N)
(1250-63N)
(1250-64N)
(1250-61N)
(1250-59N)
(1250-62N)
(1250-53N)
(1250-57N)
(1250-54N)
(1250-60N)
1
1
1
1
1
1
1
1
1
1
1
1
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
(1262E-1N)
(1262E-1N+.005)
(1262E-1N+.010)
(1312-3N)
(1312-66N)
(1312-59N)
(1312-63N)
(1312-53N)
(1312-61N)
(1312-65N)
(1312-62N)
(1312-54N)
(1312-60N)
1
1
1
1
1
1
1
1
1
1
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
(1348E-1N)
(1348E-1N+.005)
(1375-55N)
(1375-54N)
(1375-63N)
(1375-60N)
1
1
1
1
3/8
3/8
3/8
3/8
(1431E-1N)
(1441E-1N)
(1437-50N)
(1437-59N)
(1437-67N)
(1437-63N)
(1437-66N)
(1437-60N)
(1437-61N)
1
1
1
1
1
1
1
1
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
ID
1.5060
1.2820
1.7140
2.1370
2.0060
1.0045
1.195
0.975
1.313
1.700
1.625
0.750
.360
.250
.313
.400
.281
.188
1.0695
1.1320
1.1320
1.1320
1.1320
1.1610
1.1660
1.1710
1.1920
1.1920
1.1945
0.870
0.830
0.854
0.900
0.890
0.910
0.910
0.910
1.000
1.000
0.880
.195
.240
.237
.325
.237
.222
.222
.222
.188
.219
.280
1.2570
1.2570
1.2570
1.2570
1.2570
0.930
0.970
0.976
0.982
1.000
.325
.270
.180
.329
.305
1.2570
1.2570
1.2570
1.2570
1.2620
1.2670
1.2720
1.3170
1.3190
1.028
0.982
1.010
1.023
0.975
0.975
0.975
1.000
1.020
.257
.212
.257
.273
.250
.250
.250
.219
.258
1.3195
1.3195
1.3195
1.3195
1.3195
1.3195
1.3195
1.3195
1.3480
1.3530
1.3820
1.3820
1.3820
1.3820
1.4305
1.4410
1.4425
1.4440
1.4440
1.4440
1.044
0.965
0.980
1.060
1.060
1.065
1.070
1.070
1.087
1.087
1.120
1.022
1.057
1.107
1.156
1.203
1.188
1.140
1.180
1.180
.273
.235
.293
.275
.230
.285
.330
.257
.200
.200
.325
.230
.240
.237
.160
.215
.156
.305
.305
.255
1.4440
1.4445
1.4445
1.4445
1.181
1.120
1.125
1.162
.280
.300
.257
.310
277
ID Top
Seat
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
30°
30°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
30°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
30°
45°
45°
45°
45°
45°
45°
45°
45°
Universal
Universal
Universal
Universal
Universal
Universal
Honda, Universal
Mazda
Toyota
Honda, Volkswagon
Saturn, Hyundai
Detroit Diesel 2-53, 3-53, 4-53, 4V53
Detroit Diesel 2-53, 3-53, 4-53, 4V53
Detroit Diesel 2-53, 3-53, 4-53, 4V53
Universal
Universal
Chrysler, Honda.
Honda, Universal
Honda, Universal
Ford, Mazda
Chrysler, Subaru
Acura
Chrysler/Eagle, Toyota
Nissan
GM, Nissan, Toyota
Chrysler
Detroit Diesel 4 valve -71 Series
Universal
Honda, Isuzu
Toyota
Nissan
Chrysler
GM, Isuzu
GM, Isuzu
Chrysler, Nissan
Fiat
Toyota
Case, Continental, Ford
Case, Continental, Ford
BMW, Nissan
Mazda
Hyundai
Nissan, Saturn
Cummins
Universal
Audi, Volkswagen
Audi, Chrysler
Isuzu, Toyota
Chrysler, Hyundai
Mazda, Toyota
Nissan
Chrysler, Nissan, Volkswagen
NUMERICAL LISTING
(1437-13N)
Actual
OD
VALVE SEAT
Part Number Series
30000
70000
31501
71501
31502
71502
31503
71503
31504
71504
31506
71506
31600 (1000-1)
71600
31602 (1062-51)
71602
31603 (1125-55)
71603
31604 (1125-51)
71604
31605 (1125-54)
71605
31607 (1125-53)
71607
31608 (1161E-1)
71608
+5 (1161E-1+.005)
+5
+10 (1161E-1+.010) +10
31609 (1187-1)
71609
31610 (1187-7)
71610
31611 (1187-54)
71611
31612 (1250-63)
71612
31613 (1250-64)
71613
31614 (1250-61)
71614
31615 (1250-59)
71615
31616 (1250-62)
71616
31617 (1250-53)
71617
31618 (1250-57)
71618
31619 (1250-54)
71619
31620 (1250-60)
71620
31621 (1262E-1)
71621
+5 (1262E-1+.005)
+5
+10 (1262E-1+.010) +10
31622 (1312-3)
71622
31623 (1312-66)
71623
31624 (1312-59)
71624
31625 (1312-63)
71625
31626 (1312--53)
71626
31628 (1312-61)
71628
31629 (1312-65)
71629
31630 (1312--62)
71630
31631 (1312-54)
71631
31632 (1312-60)
71632
31633 (1348E-1)
71633
+5 (1348E-1+.005)
+5
31635 (1375-55)
71635
31636 (1375-54)
71636
31637 (1375-63)
71637
31638 (1375-60)
71638
31640 (1431E-1)
71640
31641 (1441E-1)
71641
31642 (1437-13)
71642
31643 (1437-50)
71643
31644 (1437-59)
71644
31645 (1437-67)
71645
31646 (1437-63)
71646
31647 (1437-66)
71647
31648 (1437-60)
71648
31649 (1437-61)
71649
NUMERICAL LISTING
VALVE SEAT
Part Number Series
30000
70000
31650 (1437-74)
71650
31651 (1437-75)
71651
31652 (1437-53)
71652
31653 (1437-58)
71653
31654 (1437-64)
71654
31655 (1437-57)
71655
31656 (1437-69)
71656
31658 (1437-73)
71658
31659 (1437-72)
71659
31660 (1437-52)
71660
31661 (1437-71)
71661
31664 (1442E-2)
71664
31665 (1486E-1)
71665
31666 (1500-75)
71666
31667 (1500-79)
71667
31668 (1500-72)
71668
31670 (1516E-1)
71670
31671 (1536E-2)
71671
31673 (1562-77)
71673
31674 (1562-72)
71674
31675 (1562-75)
71675
31676 (1562-57)
71676
31677 (1562-73)
71677
31678 (1562-4+.010) 71678
31679 (1609E-1)
71679
31680 (1628E-2)
71680
31681 (1628E-1)
71681
+5 (1628E-1+.005)
+5
+10 (1628E-1+.010) +10
31682 (1628E-3)
71682
31683 (1625-8)
71683
31684 (1625-28)
71684
31685 (1625-58)
71685
31686 (1625-63)
71686
31687 (1625-59)
71687
31688 (1625-60)
71688
31689 (1625-61)
71689
31690 (1625-55)
71690
31691 (1625-64)
71691
31692 (1625-50)
71692
31694 (1638E-1)
71694
31695 (1640E-1)
71695
31696 (1654E-1)
71696
+5 (1654E-1+.005)
+5
31697 (1657E-1)
71697
31698 (1671E-1)
71698
31699 (1670E-1)
71699
31700
71700
31701 (1690E-1)
71701
+5 (1690E-1+.005)
+5
31702 (1691E-1)
71702
31703 (1691E-2)
71703
31704 (1693E-1)
71704
+5 (1693E-1+.005)
+5
+10 (1693E-1+.010) +10
(1437-74N)
(1437-75N)
(1437-53N)
(1437-58N)
(1437-64N)
(1437-57N)
(1437-69N)
(1437-73N)
(1437-72N)
(1437-52N)
(1437-71N)
Cutter
OD
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
1 7/16
(1442E-2N)
(1486E-1N)
(1500-75N)
(1500-79N)
(1500-72N)
1 1/2
1 1/2
1 1/2
(1516E-1N)
(1536E-2N)
(1562-77N)
(1562-72N)
(1562-75N)
(1562-57N)
(1562-73N)
1
1
1
1
1
9/16
9/16
9/16
9/16
9/16
(1562-4+.010N)
(1609E-1N)
(1628E-2N)
(1628E-1N)
(1628E-1N+.005)
(1628E-1N+.010)
(1628E-3N)
(1625-8N)
(1625-28N)
(1625-58N)
(1625-63N)
(1625-59N)
(1625-60N)
(1625-61N
(1625-55N)
(1625-64N)
(1625-50N)
1
1
1
1
1
1
1
1
1
1
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
(1638E-1N)
(1640E-1N)
(1654E-1N)
(1654E-1N+.005)
(1657E-1N)
(1671E-1N)
(1670E-1N)
(1690E-1N)
(1690E-1N+.005)
(1691E-1N)
(1691E-2N)
(1693E-1N)
(1693E-1N+.005)
(1693E-1N+.010)
1 11/16
Actual
OD
ID
1.4445
1.4445
1.4445
1.4445
1.4445
1.4445
1.4445
1.4445
1.4445
1.4445
1.4445
1.4470
1.4860
1.5070
1.5070
1.5070
1.5160
1.5365
1.5695
1.5695
1.5695
1.5695
1.5695
1.5780
1.6090
1.6280
1.6285
1.6340
1.6385
1.6285
1.6300
1.6300
1.6300
1.162
1.175
1.090
1.095
1.100
1.100
1.140
1.142
1.150
1.150
1.162
1.219
1.270
1.180
1.295
1.182
1.250
1.255
1.170
1.180
1.200
1.246
1.260
1.313
1.400
1.344
1.348
1.348
1.348
1.357
1.188
1.250
1.280
1.6320
1.6320
1.6320
1.6320
1.6320
1.6320
1.6320
1.6380
1.6400
1.6544
1.6600
1.6570
1.6710
1.6750
1.6830
1.6900
1.6950
1.6905
1.6905
1.6930
1.6980
1.7030
1.345
1.380
1.250
1.305
1.333
1.335
1.340
1.412
1.375
1.367
1.367
1.312
1.367
1.420
1.466
1.250
1.250
1.438
1.438
1.438
1.438
1.438
278
ID Top
Seat
1.524
.230
.260
.354
.237
.227
.293
.237
.336
.257
.410
.214
.344
.290
.300
.262
.275
.250
.359
.267
.316
.293
.230
.233
.250
.250
.250
.365
.365
.365
.249
.375
.344
.315
.290
.257
.293
.227
.237
.420
.307
.218
.250
.313
.312
.395
.311
.302
.312
.375
.375
.181
.200
.365
.365
.365
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
30°
30°
45°
45°
45°
Mazda
Ford, Mazda
Honda
GM
GM, Isuzu
Saturn
Chrysler
Toyota/Lexus
Honda
Nissan
Caterpillar
Allis-Chalmers
Chrysler
Ford, GM
Toyota, Ford
IHC
Suzuki
Toyota
Jaguar
Mazda
Nissan
Superceded by (30644+10, 70644+10)
Allis-Chalmers
IHC
IHC, Metric Universal
IHC
Detroit Diesel 60 Series
Universal
Universal
BMW
Nissan
Nissan
GM, Isuzu
GM
Mercedes Benz.
Nissan, Volkswagen
John Deere
Chrysler
IHC
IHC
IHC
Ford.
Allis-Chalmers
Universal
Perkins
Perkins
Cummins
Cummins
Caterpillar
Caterpillar
Caterpillar
(1687-57N)
(1687-53N)
(1687-56N)
(1687-58N)
Cutter
OD
1 11/16
1 11/16
1 11/16
1 11/16
(1722E-1N)
(1733E-2N)
(1750-29N)
(1750-58N)
(1750-57N)
(1750-64N)
(1750-65N)
(1750-59N)
(1750-52N)
(1750-66N)
(1750-50N)
1
1
1
1
1
1
1
1
1
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
(1775E-1N)
(1782E-1N)
(1803E-1N)
(1814E-1N)
(1815E-1N)
(1817E-3N)
1 13/16
(1817E-3N+.005)
(1817E-3N+.010)
(1812-56N)
(1812-57N)
(1819E-1N)
(1812-60N)
1 13/16
1 13/16
1 13/16
1 13/16
(1831E-1N)
(1847E-1N)
(1847E-1N+.005)
(1847E-1N+.010)
(1853E-1N)
(1858E-1N)
(1875-13N)
(1875-38N)
(1875-8N)
(1880E-2N)
(1875-52N)
(1875-54N)
(1875-55N)
1
1
1
1
1
1
1
7/8
7/8
7/8
7/8
7/8
7/8
7/8
(1900E-2N)
(1900E-1N)
(1900E-3N)
(1912E-1N)
(1937-51N)
(1937-12N)
(1937-5N)
(1952E-1N)
(1962E-1N)
(1969E-2N)
(1973E-1N)
(1991E-1N)
(2001E-1N)
(2001E-1N+.005)
2"
ID
1.6940
1.6945
1.6945
1.6945
1.7220
1.7330
1.7550
1.7550
1.7550
1.7570
1.7570
1.7570
1.7570
1.7570
1.7570
1.7750
1.7825
1.8035
1.8140
1.8150
1.8170
1.8220
1.8270
1.8195
1.8195
1.8195
1.8195
1.8315
1.8465
1.8515
1.8565
1.8530
1.8580
1.8800
1.8800
1.8800
1.8800
1.8820
1.8820
1.8820
1.9000
1.9000
1.9000
1.9120
1.9420
1.9425
1.9430
1.9445
1.9520
1.9620
1.9690
1.9730
1.9910
2.0010
2.0060
1.335
1.338
1.375
1.397
1.357
1.455
1.375
1.360
1.430
1.454
1.468
1.360
1.455
1.460
1.500
1.458
1.490
1.571
1.600
1.595
1.540
1.540
1.540
1.535
1.450
1.571
1.590
1.555
1.563
1.563
1.563
1.498
1.608
1.500
1.625
1.500
1.563
1.615
1.575
1.625
1.645
1.650
1.650
1.625
1.540
1.578
1.625
1.674
1.660
1.595
1.535
1.658
1.616
1.712
1.712
279
ID Top
Seat
.275
.309
.295
.257
.265
.365
.188
.315
.215
.277
.276
.315
.307
.275
.255
.300
.340
.312
.315
.250
.365
.365
.365
.293
.295
.283
.450
.280
.281
.281
.281
.273
.209
.219
.188
.219
.438
.290
.290
.352
.250
.300
.220
.281
.315
.203
.281
.276
.345
.365
.413
.300
.309
.385
.385
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
30°
30°
30°
45°
45°
30°
45°
30°
30°
30°
30°
30°
30°
45°
45°
45°
30°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
30°
30°
BMW, Ford
Nissan
Nissan
Saturn
Chrysler, Cummins
Universal
Toyota
Toyota
Nissan
GM, Saab
Toyota
Nissan
Ford
GM
IHC
IHC
IHC
Allis-Chalmers
Ford
Caterpillar
Caterpillar
Caterpillar
Nissan
Toyota
Mercedes Benz
Mack
Cummins
Cummins
Cummins
Chrysler, Cummins
John Deere
Universal
Universal
Universal
Caterpillar
BMW
Chrysler
Mercedes Benz
Ford Tractor
Ford Tractor
Ford Tractor
Caterpillar
Toyota
Detroit Diesel 8.2L Series
Universal
GM
GM
Ford Truck
Metric Universal
IHC
John Deere
IHC
IHC
NUMERICAL LISTING
(1937-53N)
1 15/16
1 15/16
1 15/16
1 15/16
Actual
OD
VALVE SEAT
Part Number Series
30000
70000
31705 (1687-57)
71705
31706 (1687-53)
71706
31707 (1687-56)
71707
31708 (1687-58)
71708
31709 (1722E-1)
71709
31710 (1733E-2)
71710
31711 (1750-29)
71711
31712 (1750-58)
71712
31713 (1750-57)
71713
31714 (1750-64)
71714
31715 (1750-65)
71715
31717 (1750-59)
71717
31718 (1750-52)
71718
31719 (1750-66)
71719
31720 (1750-50)
71720
31721 (1775E-1)
71721
31722 (1782E-1)
71722
31723 (1803E-1)
71723
31724 (1814E-1)
71724
31725 (1815E-1)
71725
31726 (1817E-3)
71726
+5 (1817E-3+.005)
+5
+10 (1817E-3+.010) +10
31727 (1812-56)
71727
31728 (1812-57)
71728
31729 (1819E-1)
71729
31730 (1812-60)
71730
31731 (1831E-1)
71731
31732 (1847E-1)
71732
+5 (1847E-1+.005)
+5
+10 (1847E-1+.010) +10
31734 (1853E-1)
71734
31735 (1858E-1)
71735
31736 (1875-13)
71736
31737 (1875-38)
71737
31738 (1875-8)
71738
31739 (1880E-2)
71739
31740 (1875-52)
71740
31741 (1875-54)
71741
31742 (1875-55)
71742
31743 (1900E-2)
71743
31744 (1900E-1)
71744
31745 (1900E-3)
71745
31746 (1912E-1)
71746
31747 (1937-51)
71747
31748 (1937-12)
71748
31749 (1937-5)
71749
31750 (1937-53)
71750
31751 (1952E-1)
71751
31752 (1962E-1)
71752
31753 (1969E-2)
71753
31754 (1973E-1)
71754
31755 (1991E-1)
71755
31756 (2001E-1)
71756
+5 (2001E-1+.005)
+5
NUMERICAL LISTING
VALVE SEAT
Part Number Series
30000
70000
+10 (2001E-1+.010) +10
31757 (2003E-1)
71757
+5 (2003E-1+.005)
+5
+10 (2003E-1+.010) +10
31758 (2004E-2)
71758
31759 (2004E-4)
71759
31760 (2004E-1)
71760
31761 (2004E-3)
71761
31762 (2000-10)
71762
31763 (2000-22)
71763
31764 (2015E-1)
71764
31765 (2018E-1)
71765
31766 (2049E-1)
71766
31767 (2062-7)
71767
31768 (2062-8)
71768
31769 (2062-2)
71769
31770 (2062-30)
71770
31771 (2088E-1)
71771
31772 (2129E-1)
71772
31773 (2125-3)
71773
31774 (2125-10)
71774
31775 (2125-0)
71775
31776 (2125-7)
71776
31777 (2125-11)
71777
31779 (2125-38)
71779
31780 (2131E-1)
71780
31781 (2136E-1)
71781
31782 (2150E-1)
71782
31783 (2165E-1)
71783
+5 (2165E-1+.005)
+5
31784 (2187-13)
71784
31785 (2187-2)
71785
31786 (2220E-1)
71786
31787 (2250-13)
71787
31788 (2250-8)
71788
31790 (2312-4)
71790
31791 (2375-1)
71791
31792 (2444E-1)
71792
31793 (1625-11+.006) 71793
31800
71800
31801
71801
31802
71802
31803
71803
31804
71804
31805
71805
31807
71807
31808
71808
31809
71809
31810
71810
31811
71811
31812
71812
31813
71813
31814
71814
31815
71815
31816
71816
Cutter
OD
(2001E-1N+.010)
(2003E-1N)
(2003E-1N+.005)
(2003E-1N+.010)
(2004E-2N)
(2004E-4N)
(2004E-1N)
(2004E-3N)
2"
2"
(2000-10N)
(2000-22N)
(2015E-1N)
(2018E-1N)
(2049E-1N)
(2062-7N)
(2062-8N)
(2062-2N)
(2062-30N)
2
2
2
2
1/16
1/16
1/16
1/16
(2088E-1N)
(2129E-1N)
(2125-3N)
(2125-10N)
(2125-0N)
(2125-7N)
(2125-11N)
(2125-38N)
(2131E-1N)
2
2
2
2
2
2
2
1/8
1/8
1/8
1/8
1/8
1/8
1/8
(2136E-1N)
(2150E-1N)
(2165E-1N)
(2165E-1N+.005)
(2187-13N)
(2187-2N)
2 3/16
2 3/16
(2220E-1N)
(2250-13N)
(2250-8N)
(2312-4N)
(2375-1N)
(2444E-1N)
(1625-11N+.006)
2
2
2
2
2
1/4
1/4
5/16
3/8
7/16
Actual
OD
2.0110
2.0030
2.0080
2.0130
2.0035
2.0040
2.0040
2.0040
2.0055
2.0055
2.0150
2.0180
2.0485
2.0680
2.0680
2.0680
2.0680
2.0880
2.1290
2.1300
2.1305
2.1305
2.1305
2.1305
2.1305
2.1310
2.1360
2.1500
2.1654
2.1700
2.1930
2.1930
2.2200
2.2550
2.2555
2.3180
2.3800
2.4440
1.6360
1.2835
1.7913
1.5650
1.5827
1.0984
1.3839
1.1102
1.2602
1.3701
1.6614
1.6811
1.1122
1.6201
1.7205
2.3819
2.0508
ID
1.712
1.688
1.688
1.688
1.688
1.688
1.718
1.685
1.562
1.750
1.828
1.594
1.781
1.625
1.688
1.750
1.813
1.692
1.813
1.938
1.750
1.750
1.750
1.750
1.813
1.813
1.705
1.859
1.732
1.732
1.688
1.813
1.843
1.875
1.813
2.000
2.000
2.046
1.348
1.083
1.440
1.299
1.368
0.906
1.181
0.890
0.984
1.142
1.398
1.398
0.890
1.398
1.457
2.000
1.575
280
ID Top
Seat
.385
.282
.282
.282
.438
.438
.345
.317
.250
.156
.188
.281
.344
.281
.281
.281
.188
.299
.437
.188
.281
.375
.250
.219
.188
.437
.319
.292
.433
.433
.281
.281
.312
.375
.250
.281
.188
.299
.218
.354
.374
.335
.272
.256
.291
.236
.315
.256
.315
.335
.236
.256
.335
.394
.364
30°
30°
30°
30°
30°
30°
45°
30°
45°
45°
45°
45°
30°
45°
45°
45°
45°
30°
30°
45°
45°
45°
45°
45°
45°
30°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
IHC
Cummins
Cummins
Cummins
Caterpillar
Caterpillar
GM
Caterpillar
Universal
Universal
IHC
Perkins
Caterpillar
Universal
Universal
Universal
Universal
Mack
Caterpillar
IHC
Universal
Universal
Universal
Universal
Universal
Caterpillar
John Deere
Caterpillar
Metric Universal
Metric Universal
Universal
Universal
Ford
Universal
Universal
Universal
Universal
Mack
Superceded by (30857+6, 70857+6)
Metric Universal
Metric Universal
Metric Universal
Universal
Metric Universal
Universal
Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
Universal
Metric Universal
Metric Universal
Universal
Universal
Cutter
OD
Actual
OD
ID
1.4823
1.3051
1.3839
1.3051
1.4626
1.240
1.063
1.138
1.063
1.217
1.4961
ID Top
Seat
.315
.315
.307
.287
.307
45°
45°
45°
45°
45°
Metric Universal
1.260
.335
45°
Metric Universal
1.3780
1.102
.335
45°
1.375
1.540
1.540
1.540
1.410
1.630
1.812
1.490
1.215
1.250
1.561
1.642
1.330
1.130
1.125
1.125
1.250
1.313
1.450
1.450
1.450
2.000
2.000
2.000
.375
.365
.365
.365
.365
.280
.375
.334
.330
.337
.397
.282
.282
.304
.266
.266
.250
.219
.197
.197
.197
.323
.323
.323
45° R
30°
30°
30°
20°
0°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
30°
30°
30°
30°
30°
Universal
(2381E-1N+.010)
1.8045
1.8125
1.8175
1.8225
1.6875
2.0060
2.1400
1.8190
1.5060
1.5670
1.9080
1.8780
1.6290
1.3820
1.4010
1.4210
1.5260
1.6090
1.8120
1.8170
1.8220
2.3810
2.3860
2.3910
(2381E-1C)
2.3810
2.000
.323
30°
Cummins
(2381E-1C+.005)
2.3860
2.000
.323
30°
Cummins
(2381E-1C+.010)
2.000
2.030
2.030
2.030
.323
.323
.323
.323
30°
30°
30°
30°
Cummins
(2381E-2N+.010)
2.3910
2.3810
2.3860
2.3910
(2381E-2C)
2.3810
2.030
.323
30°
Cummins
(2381E-2C+.005)
2.3860
2.030
.323
30°
Cummins
(2381E-2C+.010)
2.3910
1.6870
1.6920
1.6970
2.3680
2.3730
2.3780
1.1945
1.1995
1.2045
1.6925
1.5670
1.4630
1.8917
1.2795
1.0827
2.030
1.438
1.438
1.438
1.890
1.890
1.890
0.935
0.935
0.935
1.430
1.250
1.220
1.575
1.063
0.866
.323
.365
.365
.365
.460
.460
.460
.235
.235
.235
.248
.188
.354
.315
.217
.236
30°
45°
45°
45°
20°
20°
20°
45°
45°
45°
30°
45°
45°
45°
45°
45°
Cummins
(1812E-3N)
(1812E-3N+.005) 1 13/16
(1812E-3N+.010)
(1687E-4N)
(2006E-6C)
2"
1 13/16
1 1/2
1 9/16
1 7/8
1 5/8
1 3/8
(1812E-4N)
(1812E-4N+.005) 1 13/16
(1812E-4N+.010)
(2381E-1N)
(2381E-1N+.005)
(2381E-2N)
(2381E-2N+.005)
(1687E-1N)
(1687E-1N+.005) 1 11/16
(1687E-1N+.010)
(2368E-2N)
(2368E-2N+.005)
(2368E-2N+.010)
1 3/16
(1187-53N+.005)
(1187-53N+.010)
(1692E-1N)
(1562-16N)
1 11/16
1 9/16
281
Radius
1.546
1.546
1.546
Metric Universal
Universal
Universal
Universal
Metric Universal
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Cummins Natural Gas
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Universal
Cummins
Cummins
Cummins
Cummins
Cummins
Cummins
Cummins
Cummins
Cummins
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Toyota
Toyota
Toyota
Mack
Universal
Metric Universal
Metric Universal
Metric Universal
Metric Universal
NUMERICAL LISTING
(1187-53N)
1.319
1.142
1.260
1.142
1.339
VALVE SEAT
Part Number Series
30000
70000
31818
71818
31819
71819
31820
71820
31821
71821
31822
71822
31823
71823
31824
71824
31825
71825
31827 (1812E-3)
71827
+5 (1812E-3+.005)
+5
+10 (1812E-3+.010) +10
31828 (1687E-4)
71828
NA
71829
31830
71830
31831
71831
31832
71832
31833
71833
31834
71834
31835
71835
31836
71836
31837
71837
31838
71838
31839
71839
31840
71840
31841
71841
31843 (1812E-4)
71843
+5 (1812E-4+.005)
+5
+10 (1812E-4+.010) +10
31844 (2381E-1)
71844
+5 (2381E-1+.005)
+5
+10 (2381E-1+.101) +10
NA
91844
NA
+5
NA
+10
31845 (2381E-2)
71845
+5 (2381E-2+.005)
+5
+10 (2381E-2+.010) +10
NA
91845
NA
+5
NA
+10
31846 (1687E-1)
71846
+5 (1687E-1+.005)
+5
+10 (1687E-1+.010) +10
31847 (2368E-2)
71847
+5 (2368E-2+.005)
+5
+10 (2368E-2+.010) +10
31868 (1187-53)
71868
+5 (1187-53+.005)
+5
+10 (1187-53+.010) +10
31869 (1692E-1)
71869
31870 (1562-16)
71870
31908
71908
31913
71913
31914
71914
31915
71915
NUMERICAL LISTING
VALVE SEAT
Part Number Series
30000
70000
31916
71916
39006
79006
39007
79007
39008
79008
39009
79009
39010
79010
39011
79011
39012
79012
39013
79013
39014
79014
39015
79015
39016
79016
39017
79017
39018
79018
39019
79019
39020
79020
39021
79021
39023
79023
39024
79024
39025
79025
39026
79026
39027
79027
39028
79028
39029
79029
39030
79030
39031
79031
39033
79033
39035
79035
39036
79036
39037
79037
39038
79038
39039
79039
39040
79040
39041
79041
39042
79042
39043
79043
39044
79044
39045
79045
39046
79046
39047
79047
39048
79048
39049
79049
39050
79050
39051
79051
39052
79052
39053
79053
39055
79055
39056
79056
39057
79057
39058
79058
39059
79059
39060
79060
39061
79061
39062
79062
39063
79063
Cutter
OD
Actual
OD
ID
1.6920
1.1024
1.1220
1.1417
1.1614
1.1811
1.1811
1.2008
1.2205
1.2205
1.2402
1.2598
1.2598
1.2795
1.2992
1.2992
1.3189
1.3386
1.3583
1.3780
1.3780
1.3976
1.4173
1.4173
1.4370
1.4567
1.4764
1.4961
1.5157
1.5354
1.5354
1.5551
1.5748
1.5748
1.5945
1.6142
1.6142
1.6339
1.6535
1.6535
1.6732
1.6929
1.6929
1.7126
1.7323
1.7323
1.7520
1.7520
1.7717
1.7717
1.7913
1.8110
1.8110
1.8307
1.8504
1.439
0.866
0.866
0.906
0.906
0.906
0.787
0.906
0.945
0.827
0.945
0.984
0.866
0.984
1.023
0.906
1.023
0.945
1.063
1.102
0.984
1.102
1.142
1.024
1.141
1.181
1.181
1.102
1.220
1.260
1.141
1.260
1.260
1.141
1.260
1.299
1.181
1.299
1.338
1.220
1.338
1.378
1.260
1.378
1.417
1.299
1.417
1.181
1.457
1.339
1.457
1.496
1.339
1.496
1.535
282
ID Top
Seat
1.515
.365
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.433
.394
.472
.472
.472
.472
.472
.472
.472
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
Universal
Blank Metric Universal
Part Number Series
30000
70000
39065
79065
39066
79066
39067
79067
39068
79068
39069
79069
39070
79070
39071
79071
Cutter
OD
Actual
OD
ID
1.8504
1.8701
1.8898
1.8898
1.8898
1.7126
1.7520
1.417
1.535
1.575
1.496
1.457
1.417
1.417
ID Top
Seat
.472
.472
.472
.433
.472
.394
.394
45°
45°
45°
45°
45°
45°
45°
NUMERICAL LISTING
VALVE SEAT
283
DURA-BOND VALVE SEAT PROGRESSIVE LISTING BY INSIDE DIAMETER
PROGRESSIVE LISTING
BY INSIDE DIAMETER
VALVE SEAT
ID
0.709
0.709
0.750
0.750
0.781
0.787
0.787
0.787
0.787
0.787
0.787
0.787
0.787
0.790
0.807
0.807
0.809
0.825
0.827
0.827
0.827
0.827
0.827
0.827
0.827
0.830
0.854
0.866
0.866
0.866
0.866
0.866
0.866
0.870
0.871
0.871
0.871
0.874
0.874
0.875
0.875
0.875
0.875
0.880
0.890
0.890
0.890
0.900
0.905
0.905
0.905
ID Top Cutter
Taper
OD
1"
1 1/8
1 1/16
1 1/16
1 1/16
1 1/8
1 1/8
1 1/8
1.000
1
1
1
1
1/16
1/16
1/8
3/16
1
1
1
1
1
1/8
3/16
3/16
1/4
3/16
1
1
1
1
1/8
1/8
3/16
1/4
Actual
OD
Depth
Seat
Angle
.9252
.9449
1.0045
1.1310
1.0690
.9843
.9882
.9890
.9902
1.0512
1.0689
1.1024
1.1811
1.0690
1.0559
1.1024
1.1661
1.1320
1.0335
1.0437
1.0472
1.0492
1.0551
1.1417
1.2205
1.1320
1.1320
1.0827
1.1024
1.1083
1.1220
1.1811
1.2598
1.0695
1.0681
1.1299
1.1933
1.0898
1.1516
1.1300
1.1921
1.1940
1.2560
1.1945
1.1102
1.1122
1.1320
1.1320
1.1940
1.2570
1.2992
.236
.256
.188
.250
.250
.276
.236
.236
.236
.224
.236
.315
.394
.260
.224
.256
.280
.285
.177
.189
.236
.217
.244
.335
.394
.240
.237
.236
.394
.256
.394
.335
.394
.195
.254
.191
.254
.250
.250
.219
.250
.250
.250
.280
.236
.236
.237
.325
.257
.230
.315
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
284
Part Number Series
30000
70000
31357
71357
31167
71167
31600 (1000-1)
71600
31143 (1125-10)
71143
31142 (1062-4)
71142
31446
71446
31346
71346
31002
71002
31349
71349
31003
71003
31383
71383
31168 (1102E-1)
71168
39011
79011
31047 (1062-50)
71047
31350
71350
31428
71428
31358
71358
31048 (1125-52)
71048
31398
71398
31037
71037
31382
71382
31405
71405
31395
71395
31169 (1142E-2)
71169
39014
79014
31603 (1125-55)
71603
31604 (1125-51)
71604
31915
71915
39006
79006
31396
71396
39007
79007
31170 (1181E-1)
71170
39017
79017
31602 (1062-51)
71602
31096 (1062-50)
71096
31097 (1125-5)
71097
31098
71098
31429
71429
31431
71431
30754 (1125-1)
70754
31352 (1187-2)
71352
31144 (1187-2)
71144
31151 (1250-50)
71151
31611 (1187-54)
71611
31807
71807
31812
71812
31607 (1125-53)
71607
31605 (1125-54)
71605
31146 (1187-51)
71146
30230 (1250-56)
70230
31425
71425
(1000-1N)
(1125-10N)
(1062-4N)
(1102E-1N)
(1062-50N)
(1125-52N)
(1142E-2N)
(1125-55N)
(1125-51N)
(1181E-1N)
(1062-51N)
(1062-50N)
(1125-5N)
(1125-1N)
(1187-2N)
(1187-2N)
(1250-50N)
(1187-54N)
(1125-53N)
(1125-54N)
(1187-51N)
(1250-56N)
ID
1 1/4
1.024
1.070
1.070
1 1/4
1 1/4
1 1/4
1
1
1
1
1
1
1
1
1
1
3/16
1/4
3/16
1/4
3/16
3/16
3/16
1/4
3/8
15/64
1 5/16
1 1/4
1.065
5/16
1/4
5/16
5/16
1/4
1/4
Depth
Seat
Angle
1.0984
1.1417
1.1496
1.1614
1.1811
1.2008
1.2205
1.2560
1.2736
1.2992
1.1610
1.1660
1.1710
1.2252
1.2560
1.2560
1.2570
1.1819
1.1933
1.2570
1.1933
1.2559
1.1940
1.1945
1.1995
1.2045
1.1940
1.2560
1.3810
1.2407
1.1732
1.1811
1.1870
1.2205
1.2402
1.2598
1.2598
1.3386
1.3195
1.2570
1.2620
1.2670
1.2720
1.2820
1.3190
1.2570
1.3190
1.3195
1.2570
1.2570
1.2670
.256
.394
.256
.394
.394
.394
.335
.313
.248
.394
.222
.222
.222
.283
.281
.288
.285
.244
.256
.325
.254
.254
.260
.235
.235
.235
.250
.188
.313
.335
.236
.335
.354
.394
.394
.335
.354
.394
.235
.270
.250
.250
.250
.250
.280
.180
.300
.293
.212
.329
.320
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
30°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
30°
30°
45°
45°
45°
45°
45°
45°
45°
45°
285
Part Number Series
30000
70000
31804
71804
39008
79008
31410
71410
39009
79009
39010
79010
39012
79012
31171 (1221E-2)
71171
31149
71149
31450
71450
39020
79020
31608 (1161E-1)
71608
31608+5 (1161E-1+.005) 71608+5
31608+10 (1161E-1+.010) 71608+10
31354
71354
31333 (1250-52)
71333
31334 (1250-52)
71334
31054 (1250-52)
71054
31049
71049
31435 (1187-52)
71435
31612 (1250-63)
71612
31099 (1187-52)
71099
31105 (1250-58)
71105
31050 (1187-52)
71050
31868 (1187-53)
71868
31868+5 (1187-53+.005) 71868+5
31868+10 (1187-53+.010) 71868+10
31145 (1187-5)
71145
31152 (1250-4)
71152
31156 (1375-10)
71156
31434
71434
31444
71444
31411
71411
31436
71436
39013
79013
39015
79015
31172 (1260E-1)
71172
31311
71311
39023
79023
31625 (1312-63)
71625
31613 (1250-64)
71613
31621 (1262E-1)
71621
31621+5 (1262E-1+.005) 71621+5
31621+10 (1262E-1+.010) 71621+10
31502
71502
31058 (1312-68)
71058
31614 (1250-61)
71614
31340
71340
31626 (1312--53)
71626
31618 (1250-57)
71618
31615 (1250-59)
71615
31313
71313
(1221E-2N)
(1161E-1N)
(1161E-1N+.005)
(1161E-1N+.010)
(1250-52N)
(1250-52N)
(1250-52N)
(1187-52N)
(1250-63N)
(1187-52N)
(1250-58N)
(1187-52N)
(1187-53N)
(1187-53N+.005)
(1187-53N+.010)
(1187-5N)
(1250-4N)
(1375-10N)
(1260E-1N)
(1312-63N)
(1250-64N)
(1262E-1N)
(1262E-1N+.005)
(1262E-1N+.010)
(1312-68N)
(1250-61N)
(1312-53N)
(1250-57N)
(1250-59N)
PROGRESSIVE LISTING
BY INSIDE DIAMETER
1
1
1
1
1
1
Actual
OD
VALVE SEAT
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.910
0.910
0.910
0.910
0.910
0.910
0.910
0.925
0.929
0.930
0.933
0.933
0.934
0.935
0.935
0.935
0.938
0.938
0.938
0.941
0.945
0.945
0.945
0.945
0.945
0.945
0.945
0.945
0.965
0.970
0.975
0.975
0.975
0.975
0.975
0.976
0.977
0.980
0.982
0.982
0.982
ID Top Cutter
Taper
OD
PROGRESSIVE LISTING
BY INSIDE DIAMETER
VALVE SEAT
ID
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.996
0.996
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.004
1.010
1.020
1.022
1.022
1.023
1.023
1.023
1.024
1.024
1.024
1.024
1.024
1.024
1.024
1.024
1.025
1.028
1.028
1.042
ID Top Cutter
Taper
OD
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1/4
5/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
1
1
1
1
1
1/4
5/16
1/4
3/8
1/4
1 1/4
1 1/4
1 5/16
Actual
OD
Depth
Seat
Angle
1.1850
1.1858
1.1870
1.1870
1.2008
1.2205
1.2303
1.2598
1.2602
1.2795
1.2854
1.2992
1.2992
1.3634
1.3780
1.2559
1.3181
1.1920
1.1920
1.2550
1.2551
1.2560
1.2560
1.2560
1.2570
1.3170
1.3175
1.3190
1.3190
1.3820
1.3820
1.2854
1.2570
1.3190
1.2570
1.3820
1.2570
1.2992
1.3189
1.2441
1.2480
1.2724
1.2854
1.2992
1.3386
1.3780
1.4173
1.3433
1.2550
1.2570
1.3190
.248
.248
.200
.248
.256
.237
.315
.394
.315
.394
.236
.177
.335
.394
.394
.254
.254
.188
.219
.250
.250
.219
.250
.313
.305
.219
.250
.250
.313
.280
.410
.315
.257
.258
.225
.230
.273
.394
.394
.236
.256
.236
.335
.256
.335
.354
.394
.299
.227
.257
.238
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
286
Part Number Series
30000
70000
31345
71345
31004
71004
31445
71445
31005
71005
31051
71051
31448
71448
31414
71414
39016
79016
31808
71808
39018
79018
31360
71360
31136
71136
31173 (1299E-1)
71173
31035
71035
39026
79026
31100 (1250-55)
71100
31106 (1312-4)
71106
31609 (1187-1)
71609
31610 (1187-7)
71610
30764 (1250-3)
70764
31359 (1250-3)
71359
31147 (1250-1)
71147
31150 (1250-3)
71150
31148 (1250-12)
71148
31616 (1250-62)
71616
31622 (1312-3)
71622
31056 (1312-4)
71056
31154 (1312-4)
71154
31155 (1312-5)
71155
31064 (1375-64)
71064
31063 (1375-52)
71063
31006
71006
31619 (1250-54)
71619
31623 (1312-66)
71623
30205
70205
31636 (1375-54)
71636
31620 (1250-60)
71620
39019
79019
39021
79021
31384
71384
31409
71409
31347
71347
31007
71007
31348
71348
31174 (1339E-2)
71174
31175 (1378E-1)
71175
39029
79029
31361
71361
31043
71043
31617 (1250-53)
71617
30779 (1312-67)
70779
(1299E-1N)
(1250-55N)
(1312-4N)
(1187-1N)
(1187-7N)
(1250-3N)
(1250-3N)
(1250-1N)
(1250-3N)
(1250-12N)
(1250-62N)
(1312-3N)
(1312-4N)
(1312-4N)
(1312-5N)
(1375-64N)
(1375-52N)
(1250-54N)
(1312-66N)
(1375-54N)
(1250-60N)
(1339E-2N)
(1378E-1N)
(1250-53N)
(1312-67N)
ID
1
1
1
1
1
1
5/16
5/16
5/16
5/16
5/16
5/16
1
1
1
1
1
1
1
1
1
1/4
3/8
5/16
3/8
7/16
5/16
5/16
5/16
3/8
1.142
1.142
1 5/16
1 5/16
1 11/32
1 11/32
1
1
1
1
3/8
3/8
3/8
3/8
1 5/16
1 5/16
1 5/16
1.329
1 5/16
1 7/16
1 3/8
1 7/16
1.220
Depth
Seat
Angle
1.3195
1.3190
1.3170
1.3170
1.3170
1.3170
1.3050
1.2550
1.3820
1.3181
1.3807
1.4433
1.3195
1.3195
1.3190
1.3800
1.2795
1.2827
1.3051
1.3051
1.3170
1.3189
1.3190
1.3268
1.3386
1.3484
1.3504
1.3583
1.3799
1.3800
1.3800
1.3800
1.4173
1.3195
1.3195
1.3195
1.4055
1.3228
1.2835
1.3071
1.3425
1.3190
1.3480
1.3530
1.4445
1.3803
1.4445
1.4577
1.3610
1.3820
1.4440
.273
.316
.219
.227
.250
.313
.227
.250
.240
.254
.254
.254
.230
.275
.188
.219
.217
.236
.287
.315
.219
.354
.313
.315
.394
.315
.315
.394
.253
.188
.250
.313
.354
.285
.257
.330
.300
.287
.354
.276
.236
.305
.200
.200
.354
.250
.237
.352
.306
.300
.315
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
287
Part Number Series
30000
70000
31624 (1312-59)
71624
30563 (1312-64)
70563
30735 (1312-6)
70735
30734
70734
30736 (1312-9)
70736
30737
70737
30739
70739
31052
71052
31637 (1375-63)
71637
31101 (1312-9)
71101
31102 (1375-50)
71102
31107 (1437-72)
71107
31629 (1312-65)
71629
31628 (1312-61)
71628
30775 (1312-1)
70775
31125 (1375-6)
71125
31914
71914
31403
71403
31821
71821
31819
71819
31289 (1312-6)
71289
31293
71293
31153 (1312-10)
71153
31009
71009
31273
71273
31060
71060
31356
71356
39024
79024
31062 (1375-7)
71062
30786 (1375-3)
70786
30788 (1375-7)
70788
30787 (1375-18)
70787
31176 (1417E-1)
71176
31630 (1312--62)
71630
31632 (1312-60)
71632
31631 (1312-54)
71631
31479
71479
31397
71397
31800
71800
31123
71123
31385
71385
30562 (1312-56)
70562
31633 (1348E-1)
71633
31633+5 (1348E-1+.005) 71633+5
31652 (1437-53)
71652
31363 (1375-2)
71363
31653 (1437-58)
71653
31113 (1457E-2)
71113
31312
71312
31139 (1375-62)
71139
31329 (1437-56)
71329
(1312-59N)
(1312-64N)
(1312-6N)
(1312-9N)
(1375-63N)
(1312-9N)
(1375-50N)
(1437-72N)
(1312-65N)
(1312-61N)
(1312-1N)
(1375-6N)
(1312-6N)
(1312-10N)
(1375-7N)
(1375-3N)
(1375-7N)
(1375-18N)
(1417E-1N)
(1312-62N)
(1312-60N)
(1312-54N)
(1312-56N)
(1348E-1N)
(1348E-1N+.005)
(1437-53N)
(1375-2N)
(1437-58N)
(1457E-2N)
(1375-62N)
(1437-56N)
PROGRESSIVE LISTING
BY INSIDE DIAMETER
1 3/8
1 7/16
Actual
OD
VALVE SEAT
1.044
1.045
1.046
1.046
1.046
1.046
1.048
1.055
1.057
1.059
1.059
1.059
1.060
1.060
1.062
1.062
1.063
1.063
1.063
1.063
1.063
1.063
1.063
1.063
1.063
1.063
1.063
1.063
1.063
1.063
1.063
1.063
1.063
1.065
1.070
1.070
1.079
1.082
1.083
1.083
1.083
1.085
1.087
1.087
1.090
1.093
1.095
1.098
1.100
1.100
1.100
ID Top Cutter
Taper
OD
PROGRESSIVE LISTING
BY INSIDE DIAMETER
VALVE SEAT
ID
1.100
1.100
1.100
1.100
1.102
1.102
1.102
1.102
1.102
1.102
1.102
1.102
1.102
1.102
1.102
1.105
1.107
1.108
1.114
1.120
1.120
1.121
1.122
1.123
1.124
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.126
1.126
1.126
1.126
1.126
1.126
ID Top Cutter
Taper
OD
1.225
1.160
1
1
1
1
7/16
7/16
1/2
1/2
1 3/8
1 7/16
1 3/8
Radius
1 23/64
1 3/8
1 7/16
1 3/8
1 1/2
1 5/16
1
1
1
1
1
3/8
3/8
3/8
3/8
3/8
1
1
1
1
1
7/16
7/16
7/16
7/16
7/16
1
1
1
1
1
1
1/2
1/2
1/2
1/2
1/2
9/16
1 11/32
1 7/16
1 7/16
1 7/16
Actual
OD
Depth
Seat
Angle
1.4445
1.4445
1.5050
1.5070
1.3051
1.3387
1.3445
1.3780
1.3780
1.3780
1.3820
1.3878
1.3976
1.4567
1.4961
1.4440
1.3820
1.3670
1.3661
1.3820
1.4445
1.3807
1.5051
1.3190
1.3776
1.3800
1.3800
1.3800
1.3800
1.3810
1.4010
1.4210
1.4421
1.4421
1.4425
1.4425
1.4445
1.4471
1.4521
1.5043
1.5050
1.5050
1.5050
1.5050
1.5690
1.3268
1.3307
1.3484
1.4421
1.4425
1.4425
.227
.293
.316
.315
.276
.177
.236
.197
.335
.394
.260
.315
.394
.354
.394
.322
.237
.245
.295
.325
.300
.254
.343
.300
.313
.188
.219
.250
.375
.266
.266
.266
.250
.354
.250
.313
.257
.250
.250
.253
.188
.219
.250
.313
.313
.250
.250
.250
.315
.188
.219
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45° R
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
288
Part Number Series
30000
70000
31654 (1437-64)
71654
31655 (1437-57)
71655
30045 (1500-57)
70045
31074 (1500-57)
71074
31008
71008
31306
71306
31449
71449
31408
71408
31824
71824
39025
79025
30238 (1375-56)
70238
31065
71065
39027
79027
31068 (1457E-2)
71068
39035
79035
30806 (1437-65)
70806
31638 (1375-60)
71638
31263
71263
31061
71061
31635 (1375-55)
71635
31647 (1437-66)
71647
31103 (1375-50)
71103
31367
71367
31320
71320
31114
71114
30790 (1375-4)
70790
30558 (1375-1)
70558
30791 (1375-2)
70791
30792 (1375-0)
70792
31157 (1375-5)
71157
31838
71838
31839
71839
31380 (1442E-1)
71380
31364 (1437-53)
71364
30802 (1437-8)
70802
30803 (1437-6)
70803
31648 (1437-60)
71648
31380+5 (1442E-1+.005) 71380+5
31380+10 (1442E-1+.010) 71380+10
31072
71072
30706 (1500-5)
70706
30707 (1500-8)
70707
30708 (1500-25)
70708
30709 (1500-9)
70709
31163 (1562-28)
71163
31010
71010
31438
71438
31011
71011
31013 (1437-56)
71013
31225 (1437-10)
71225
30801 (1437-4)
70801
(1437-64N)
(1437-57N)
(1500-57N)
(1500-57N)
(1375-56N)
(1457E-2N)
(1437-65N)
(1375-60N)
(1375-55N)
(1437-66N)
(1375-50N)
(1375-4N)
(1375-1N)
(1375-2N)
(1375-0N)
(1375-5N)
(1442E-1N)
(1437-53N)
(1437-8N)
(1437-6N)
(1437-60N)
(1442E-1N+.005)
(1442E-1N+.010)
(1500-5N)
(1500-8N)
(1500-25N)
(1500-9N)
(1562-28N)
(1437-56N)
(1437-10N)
(1437-4N)
ID
Depth
Seat
Angle
1 3/8
1 7/16
1 7/16
1.3820
1.4429
1.4440
1.3839
1.4040
1.4440
1.4445
1.5050
1.4370
1.5354
1.5748
1.3701
1.3701
1.3976
1.4016
1.4016
1.4173
1.4272
1.4445
1.4449
1.4685
1.4961
1.5008
1.4445
1.4445
1.4220
1.4236
1.4305
1.3976
1.4445
1.4445
1.4445
1.5695
1.4445
1.5060
1.5070
1.5060
1.4440
1.4440
1.5060
1.5060
1.5070
1.5070
1.5690
1.5695
1.5823
1.3839
1.4055
1.4055
1.4114
1.4440
.304
.315
.316
.307
.254
.305
.237
.325
.394
.394
.394
.256
.283
.394
.315
.374
.394
.315
.336
.315
.315
.354
.283
.257
.410
.315
.250
.160
.374
.214
.230
.310
.267
.260
.236
.236
.293
.255
.305
.214
.307
.300
.305
.305
.316
.413
.291
.339
.354
.244
.280
45°
45°
45°
45°
45° R
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
1.250
1.260
Radius
1.250
1 7/16
1 7/16
1 1/2
1 27/64
1 7/16
1 7/16
1 7/16
1 7/16
1.235
1.307
1.280
1.345
1.318
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
7/16
7/16
7/16
9/16
7/16
1/2
1/2
1/2
7/16
7/16
1/2
1/2
1/2
1/2
9/16
9/16
1 13/32
1 7/16
289
Part Number Series
30000
70000
31837
71837
31407 (1437-68)
71407
30809 (1437-68)
70809
31820
71820
31264
71264
31643 (1437-50)
71643
31656 (1437-69)
71656
30105 (1500-65)
70105
39030
79030
39038
79038
39041
79041
31809
71809
31362
71362
31274
71274
31012
71012
31277
71277
39028
79028
31420
71420
31658 (1437-73)
71658
31439 (1437-68)
71439
31365
71365
31178 (1496E-1)
71178
31366
71366
31659 (1437-72)
71659
31660 (1437-52)
71660
31066
71066
31412
71412
31640 (1431E-1)
71640
31294
71294
31661 (1437-71)
71661
31650 (1437-74)
71650
31649 (1437-61)
71649
31673 (1562-77)
71673
31651 (1437-75)
71651
31205 (1500-77)
71205
30824 (1500-77)
70824
31247 (1500-68)
71247
31645 (1437-67)
71645
31644 (1437-59)
71644
31207 (1500-74)
71207
31258 (1500-54)
71258
31666 (1500-75)
71666
30031 (1500-54)
70031
31079 (1562-70)
71079
31674 (1562-72)
71674
31081
71081
31805
71805
31423
71423
31443
71443
31399
71399
31646 (1437-63)
71646
(1437-68N)
(1437-68N)
(1437-50N)
(1437-69N)
(1500-65N)
(1437-73N)
(1437-68N)
(1496E-1N)
(1437-72N)
(1437-52N)
(1431E-1N)
(1437-71N)
(1437-74N)
(1437-61N)
(1562-77N)
(1437-75N)
(1500-77N)
(1500-77N)
(1500-68N)
(1437-67N)
(1437-59N)
(1500-74N)
(1500-54N)
(1500-75N)
(1500-54N)
(1562-70N)
(1562-72N)
(1437-63N)
PROGRESSIVE LISTING
BY INSIDE DIAMETER
Actual
OD
VALVE SEAT
1.130
1.130
1.135
1.138
1.138
1.140
1.140
1.140
1.141
1.141
1.141
1.142
1.142
1.142
1.142
1.142
1.142
1.142
1.142
1.142
1.142
1.142
1.148
1.150
1.150
1.152
1.152
1.156
1.161
1.162
1.162
1.162
1.170
1.175
1.175
1.175
1.179
1.180
1.180
1.180
1.180
1.180
1.180
1.180
1.180
1.180
1.181
1.181
1.181
1.181
1.181
ID Top Cutter
Taper
OD
PROGRESSIVE LISTING
BY INSIDE DIAMETER
VALVE SEAT
ID
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.182
1.183
1.183
1.183
1.186
1.186
1.187
1.188
1.188
1.188
1.188
1.188
1.188
1.188
1.188
1.188
1.188
1.188
1.188
1.188
1.188
1.188
1.195
1.195
1.200
1.200
1.200
1.200
1.200
1.203
1.203
1.210
1.210
1.210
1.210
1.210
1.213
1.215
1.215
1.215
1.215
ID Top Cutter
Taper
OD
1 1/2
1 1/2
1 9/16
1 7/16
1 9/16
1
1
1
1
1
1
3/8
7/16
7/16
7/16
7/16
7/16
1
1
1
1
1
1
1
1
1
1
1/2
1/2
1/2
1/2
1/2
9/16
9/16
5/8
1/2
1/2
1 7/16
1.240
1.294
1.263
1.320
1.333
1.276
1.344
1.275
1 1/2
1 9/16
1
1
1
1
1
1
1/2
1/2
1/2
1/2
1/2
1/2
1
1
1
1
1/2
1/2
1/2
1/2
Actual
OD
Depth
Seat
Angle
1.4567
1.4567
1.4646
1.4764
1.4961
1.5354
1.5354
1.5748
1.6142
1.7520
1.5070
1.5059
1.5248
1.5681
1.4405
1.5657
1.4791
1.3810
1.4421
1.4425
1.4425
1.4440
1.4440
1.5000
1.5043
1.5045
1.5050
1.5050
1.5060
1.5680
1.5685
1.6300
1.5060
1.5060
1.4008
1.4440
1.4803
1.5060
1.5695
1.4410
1.5070
1.5060
1.5067
1.5070
1.5070
1.5070
1.4777
1.5050
1.5050
1.5050
1.5050
.315
.394
.276
.394
.276
.276
.354
.374
.394
.394
.275
.254
.394
.254
.313
.376
.313
.219
.250
.156
.219
.219
.250
.250
.313
.313
.218
.250
.313
.313
.313
.375
.315
.360
.220
.297
.276
.315
.293
.215
.280
.345
.344
.315
.345
.345
.154
.219
.250
.280
.305
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
60°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
290
Part Number Series
30000
70000
31069
71069
39031
79031
31070
71070
39033
79033
31038
71038
31369
71369
31179 (1535E-1)
71179
31181 (1575E-3)
71181
39044
79044
39056
79056
31668 (1500-72)
71668
31108 (1500-6)
71108
31036
71036
31104 (1562-31)
71104
31111 (1437-25)
71111
31112 (1562-0)
71112
31353
71353
31248 (1375-22)
71248
31402 (1437-5)
71402
31642 (1437-13)
71642
31030 (1437-3)
71030
31159 (1437-3)
71159
31161 (1437-5)
71161
31198
71198
31342 (1500-10)
71342
31032 (1500-10)
71032
30823 (1500-2)
70823
30822 (1500-6)
70822
31162 (1500-10)
71162
30839 (1562-11)
70839
31253 (1562-11)
71253
31683 (1625-8)
71683
31326 (1500-58)
71326
31501
71501
31337
71337
30818 (1437-62)
70818
31400
71400
31241 (1500-58)
71241
31675 (1562-75)
71675
31641 (1441E-1)
71641
31484 (1500-70)
71484
31214 (1500-63)
71214
31314 (1500-63)
71314
30191 (1500-61)
70191
30148 (1500-63)
70148
31291 (1500-63)
71291
31305
71305
30705 (1500-4)
70705
30722 (1500-11)
70722
30015 (1500-50)
70015
30721
70721
(1535E-1N)
(1575E-3N)
(1500-72N)
(1500-6N)
(1562-31N)
(1437-25N)
(1562-0N)
(1375-22N)
(1437-5N)
(1437-13N)
(1437-3N)
(1437-3N)
(1437-5N)
(1500-10N)
(1500-10N)
(1500-2N)
(1500-6N)
(1500-10N)
(1562-11N)
(1562-11N)
(1625-8N)
(1500-58N)
(1437-62N)
(1500-58N)
(1562-75N)
(1441E-1N)
(1500-70N)
(1500-63N)
(1500-63N)
(1500-61N)
(1500-63N)
(1500-63N)
(1500-4N)
(1500-11N)
(1500-50N)
ID
1
1
1
1
1/2
1/2
1/2
1/2
1.339
1 7/16
1 9/16
1 7/16
1.328
1 1/2
1 1/2
1 33/64
1.356
1 9/16
1 9/16
1 7/16
1 1/2
1 9/16
1 1/2
1 15/32
1.319
1 9/16
1 1/2
1 9/16
Radius
1.390
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
Depth
Seat
Angle
1.5050
1.5050
1.5050
1.5060
1.4626
1.4425
1.4470
1.5695
1.4252
1.4449
1.4567
1.4630
1.4764
1.4823
1.4843
1.4862
1.4961
1.5051
1.5060
1.5157
1.5157
1.5157
1.5209
1.5256
1.5354
1.5685
1.5695
1.6142
1.6535
1.5335
1.4440
1.5060
1.5690
1.4772
1.5070
1.4750
1.4764
1.4823
1.5700
1.5690
1.5059
1.5695
1.6565
1.4440
1.4440
1.5043
1.5050
1.5050
1.5050
1.5050
1.5050
.310
.318
.345
.330
.307
.219
.344
.317
.295
.295
.394
.354
.335
.276
.315
.335
.394
.315
.310
.335
.343
.394
.285
.335
.335
.344
.344
.335
.394
.335
.250
.278
.310
.335
.225
.227
.335
.315
.354
.352
.254
.230
.375
.219
.313
.281
.188
.219
.240
.250
.282
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
0°
45°
45°
45°
45°
45°
45°
45° R
45°
45°
45°
45°
45°
45°
45°
45°
291
Part Number Series
30000
70000
30716 (1500-62)
70716
30717 (1500-58)
70717
30718 (1500-63)
70718
31832
71832
31822
71822
31031 (1437-2)
71031
31664 (1442E-2)
71664
31287 (1562-69)
71287
31121
71121
31440 (1437-62)
71440
31275
71275
31908
71908
31071
71071
31014
71014
31015
71015
31387
71387
31276
71276
31073 (1500-61)
71073
31204 (1500-62)
71204
31388
71388
31368
71368
39036
79036
31432
71432
31389
71389
31180
71180
31222 (1562-54)
71222
31292 (1562-54)
71292
31182
71182
39047
79047
31016
71016
31067 (1437-54)
71067
31244 (1500-73)
71244
31078
71078
31315
71315
30204
70204
31044
71044
31386
71386
31818
71818
31318 (1562-51)
71318
31328 (1562-51)
71328
31109 (1500-3)
71109
31676 (1562-57)
71676
31478
71478
30556 (1437-1)
70556
31160 (1437-30)
71160
31343 (1500-28)
71343
30710 (1500-13)
70710
30711 (1500-1)
70711
30024 (1500-52)
70024
30712 (1500-3)
70712
30713 (1500-28)
70713
(1500-62N)
(1500-58N)
(1500-63N)
(1437-2N)
(1442E-2N)
(1562-69N)
(1437-62N)
(1500-61N)
(1500-62N)
(1562-54N)
(1562-54N)
(1437-54N)
(1500-73N)
(1562-51N)
(1562-51N)
(1500-3N)
(1562-57N)
(1437-1N)
(1437-30N)
(1500-28N)
(1500-13N)
(1500-1N)
(1500-52N)
(1500-3N)
(1500-28N)
PROGRESSIVE LISTING
BY INSIDE DIAMETER
1
1
1
1
1
1
1
1
Actual
OD
VALVE SEAT
1.215
1.215
1.215
1.215
1.217
1.219
1.219
1.219
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.221
1.230
1.230
1.230
1.232
1.239
1.240
1.240
1.240
1.243
1.245
1.246
1.246
1.246
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
ID Top Cutter
Taper
OD
PROGRESSIVE LISTING
BY INSIDE DIAMETER
VALVE SEAT
ID
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.255
1.255
1.255
1.255
1.255
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.265
1.265
1.270
1.280
1.280
1.280
1.281
1.282
1.287
1.290
ID Top Cutter
Taper
OD
1 1/2
1 1/2
1 1/2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
5/8
5/8
5/8
1 3/4
1 1/2
1.372
1.392
1 9/16
1 9/16
1 9/16
1 9/16
1.340
1.320
1.450
1.345
1 9/16
1 9/16
1 1/2
1 5/8
1 5/8
1 11/16
1 9/16
Actual
OD
Depth
Seat
Angle
1.5050
1.5050
1.5070
1.5160
1.5260
1.5630
1.5669
1.5670
1.5670
1.5673
1.5680
1.5680
1.5680
1.5680
1.5680
1.6300
1.6300
1.6300
1.6300
1.6300
1.6320
1.6320
1.6900
1.6950
1.7550
1.5060
1.5365
1.5685
1.5685
1.5690
1.4850
1.4961
1.5354
1.5472
1.5551
1.5695
1.5748
1.5945
1.6340
1.6535
1.6929
1.5685
1.5695
1.4860
1.5059
1.6300
1.6310
1.6945
1.6000
1.4803
1.5685
.313
.375
.344
.250
.250
.250
.313
.188
.337
.253
.219
.250
.281
.313
.317
.219
.250
.313
.344
.375
.293
.312
.375
.375
.250
.318
.359
.319
.319
.320
.237
.335
.394
.315
.394
.233
.394
.394
.394
.374
.394
.280
.280
.290
.295
.315
.219
.313
.299
.283
.324
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
292
Part Number Series
30000
70000
30714 (1500-12)
70714
30715 (1500-0)
70715
31485 (1505E-1)
71485
31670 (1516E-1)
71670
31840
71840
31197
71197
31344 (1562-17)
71344
31870 (1562-16)
71870
31833
71833
31077 (1562-7)
71077
30640 (1562-6)
70640
30645 (1562-7)
70645
30740 (1562-46)
70740
30647 (1562-17)
70647
30719 (1562-17)
70719
30661 (1625-9)
70661
30662 (1625-6)
70662
30663 (1625-7)
70663
31684 (1625-28)
71684
30853 (1625-29)
70853
31688 (1625-60)
71688
31332 (1625-7)
71332
31701 (1690E-1)
71701
31701+5 (1690E-1+.005) 71701+5
31128 (1750-10)
71128
31235 (1500-69)
71235
31671 (1536E-2)
71671
31199 (1562-67)
71199
31259 (1562-67)
71259
31140 (1562-67)
71140
30738
70738
31823
71823
39037
79037
31075
71075
39039
79039
31677 (1562-73)
71677
39040
79040
39042
79042
31323
71323
31183 (1654E-3)
71183
39050
79050
31210 (1562-66)
71210
31286 (1562-66)
71286
31665 (1486E-1)
71665
31419
71419
31685 (1625-58)
71685
31233
71233
31492
71492
31371 (1600E-1)
71371
31379
71379
31251 (1562-74)
71251
(1500-12N)
(1500-0N)
(1505E-1N)
(1516E-1N)
(1562-17N)
(1562-16N)
(1562-7N)
(1562-6N)
(1562-7N)
(1562-46N)
(1562-17N)
(1562-17N)
(1625-9N)
(1625-6N)
(1625-7N)
(1625-28N)
(1625-29N)
(1625-60N)
(1625-7N)
(1690E-1N)
(1690E-1N+.005)
(1750-10N)
(1500-69N)
(1536E-2N)
(1562-67N)
(1562-67N)
(1562-67N)
(1562-73N)
(1654E-3N)
(1562-66N)
(1562-66N)
(1486E-1N)
(1625-58N)
(1600E-1N)
(1562-74N)
ID
1.422
1.390
1.390
1 1/2
1 5/8
1 5/8
1 9/16
1 11/16
1 5/8
1 9/16
1 9/16
1 9/16
1 9/16
1 9/16
1 5/8
1 41/64
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 3/4
1
1
1
1
1
1
1
1
1
1
1/2
1/2
9/16
9/16
9/16
5/8
5/8
5/8
5/8
5/8
Depth
Seat
Angle
1.5070
1.6310
1.6320
1.5354
1.5551
1.5630
1.5630
1.5650
1.6142
1.6339
1.6535
1.6929
1.7323
1.5690
1.6940
1.6320
1.5680
1.5680
1.5680
1.5680
1.5680
1.5730
1.5730
1.5780
1.6300
1.6460
1.6570
1.6920
1.6920
1.6920
1.6920
1.6921
1.7550
1.7600
1.5045
1.5060
1.5680
1.5680
1.5680
1.5780
1.6090
1.6250
1.6300
1.6300
1.6300
1.6300
1.6300
1.6560
1.7140
1.7550
1.7560
.262
.317
.317
.315
.335
.339
.354
.335
.394
.394
.335
.335
.394
.256
.360
.227
.219
.219
.250
.250
.313
.219
.250
.219
.188
.350
.395
.219
.250
.313
.375
.315
.395
.395
.188
.219
.188
.219
.280
.250
.219
.250
.219
.250
.281
.313
.395
.375
.313
.250
.313
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
293
Part Number Series
30000
70000
31667 (1500-79)
71667
31218 (1625-56)
71218
31236 (1625-56)
71236
31370
71370
31076
71076
31422
71422
31442
71442
31802
71802
39043
79043
39045
79045
31184
71184
31186
71186
39053
79053
31080 (1562-76)
71080
31083 (1687-52)
71083
31689 (1625-61)
71689
30541 (1562-9)
70541
30643 (1562-1)
70643
30503 (1562-2)
70503
30644 (1562-4)
70644
30731 (1562-18)
70731
30643+5 (1562-1+.005)
70643+5
30644+5 (1562-4+.005)
70644+5
30643+10 (1562-1+.010)
70643+10
31455 (1625-30)
71455
31226
71226
31697 (1657E-1)
71697
30674 (1687-9)
70674
30675 (1687-6)
70675
30676 (1687-11)
70676
31270 (1687-0)
71270
31374 (1687-11)
71374
31232
71232
31229
71229
31290 (1500-29)
71290
31255 (1500-30)
71255
30840 (1562-36)
70840
30838 (1562-8)
70838
31267 (1562-37)
71267
30644+10 (1562-4+.010)
70644+10
31841
71841
31196
71196
30649 (1625-4)
70649
30650 (1625-3)
70650
31488 (1625-18)
71488
30651 (1625-10)
70651
30854 (1625-20)
70854
31272
71272
31503
71503
30889 (1750-6)
70889
31165 (1750-17)
71165
(1500-79N)
(1625-56N)
(1625-56N)
(1562-76N)
(1687-52N)
(1625-61N
(1562-9N)
(1562-1N)
(1562-2N)
(1562-4N)
(1562-18N)
(1562-1N+.005)
(1562-4N+.005)
(1562-1N+.010)
(1625-30N)
(1657E-1N)
(1687-9N)
(1687-6N)
(1687-11N)
(1687-0N)
(1687-11N)
(1500-29N)
(1500-30N)
(1562-36N)
(1562-8N)
(1562-37N)
(1562-4N+.010)
(1625-4N)
(1625-3N)
(1625-18N)
(1625-10N)
(1625-20N)
(1750-6N)
(1750-17N)
PROGRESSIVE LISTING
BY INSIDE DIAMETER
1 3/4
1 3/4
Actual
OD
VALVE SEAT
1.295
1.298
1.298
1.299
1.299
1.299
1.299
1.299
1.299
1.299
1.299
1.299
1.299
1.300
1.300
1.305
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.313
1.313
1.313
1.313
1.313
1.313
1.313
1.313
1.313
1.313
1.313
1.313
1.313
1.313
1.313
1.313
1.313
ID Top Cutter
Taper
OD
PROGRESSIVE LISTING
BY INSIDE DIAMETER
VALVE SEAT
ID
1.315
1.315
1.319
1.319
1.319
1.319
1.319
1.320
1.320
1.322
1.323
1.327
1.329
1.330
1.333
1.334
1.335
1.335
1.335
1.338
1.338
1.338
1.339
1.339
1.339
1.339
1.339
1.339
1.339
1.339
1.339
1.339
1.340
1.344
1.344
1.344
1.344
1.344
1.344
1.345
1.348
1.348
1.348
1.348
1.348
1.350
1.350
1.357
1.357
1.358
1.358
ID Top Cutter
Taper
OD
Actual
OD
Depth
Seat
Angle
1 9/16
1.5690
1.6594
1.5591
1.5748
1.5827
1.6220
1.6614
1.6260
1.6310
1.6245
1.7570
1.5410
1.6320
1.6290
1.6320
1.6300
1.6320
1.6940
1.7333
1.6535
1.6732
1.6945
1.5827
1.5984
1.6142
1.6386
1.6417
1.6694
1.6929
1.7323
1.7717
1.8110
1.6320
1.5670
1.6280
1.6300
1.6310
1.6925
1.6945
1.6320
1.6285
1.6300
1.6340
1.6360
1.6385
1.6560
1.6929
1.6285
1.7220
1.5846
1.7717
.270
.205
.374
.354
.374
.260
.413
.375
.300
.375
.280
.256
.280
.282
.237
.313
.420
.275
.372
.394
.394
.309
.295
.276
.295
.315
.250
.177
.325
.374
.472
.472
.307
.219
.250
.250
.313
.313
.375
.290
.365
.218
.365
.218
.365
.375
.315
.249
.265
.287
.394
45°
45° R
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45° R
45°
30°
45°
45°
45°
Radius
1 21/32
1 5/8
1.490
1 3/4
1 5/8
1 5/8
1 5/8
1 5/8
1 5/8
1 11/16
1 11/16
1 19/32
1 5/8
1 9/16
1 5/8
1 5/8
1 11/16
1 11/16
1 5/8
1 5/8
1.524
Radius
294
Part Number Series
30000
70000
31138
71138
31336
71336
31295
71295
31296
71296
31278
71278
31437
71437
31082
71082
31372 (1624E-1)
71372
31223 (1625-62)
71223
30855 (1624E-1)
70855
31467 (1750-51)
71467
31416
71416
30860 (1625-54)
70860
31836
71836
31690 (1625-55)
71690
30642 (1630E-1)
70642
31691 (1625-64)
71691
31705 (1687-57)
71705
31110 (1732E-1)
71110
39046
79046
39048
79048
31706 (1687-53)
71706
31017
71017
31018
71018
31039
71039
31019
71019
31020 (1640E-1)
71020
31308
71308
31185 (1687-50)
71185
31187 (1732E-1)
71187
39058
79058
39061
79061
31692 (1625-50)
71692
31033 (1562-3)
71033
31680 (1628E-2)
71680
31489 (1625-5)
71489
31164 (1625-14)
71164
30559 (1687-4)
70559
31493
71493
31686 (1625-63)
71686
31681 (1628E-1)
71681
30857 (1625-11)
70857
31681+5 (1628E-1+.005) 71681+5
30857+6 (1625-11+.006) 70857+6
31681+10 (1628E-1+.010) 71681+10
31279
71279
31406 (1687-4)
71406
31682 (1628E-3)
71682
31709 (1722E-1)
71709
31418
71418
31227 (1772E-2)
71227
(1624E-1N)
(1625-62N)
(1624E-1N)
(1750-51N)
(1625-54N)
(1625-55N)
(1630E-1N)
(1625-64N)
(1687-57N)
(1732E-1N)
(1687-53N)
(1640E-1N)
(1687-50N)
(1732E-1N)
(1625-50N)
(1562-3N)
(1628E-2N)
(1625-5N)
(1625-14N)
(1687-4N)
(1625-63N)
(1628E-1N)
(1625-11N)
(1628E-1N+.005)
(1625-11N+.006)
(1628E-1N+.010)
(1687-4N)
(1628E-3N)
(1722E-1N)
(1772E-2N)
ID
1 3/4
1 3/4
1.429
1.486
1.460
1
1
1
1
1
1
1
9/16
9/16
5/8
5/8
5/8
5/8
5/8
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
Radius
1 13/16
1 21/32
1 3/4
1 5/8
1.520
1.559
1.480
1 11/16
1 3/4
1 11/16
1 11/16
1 11/16
Depth
Seat
Angle
1.7770
1.7550
1.7570
1.5413
1.6544
1.6600
1.6710
1.5827
1.6690
1.6890
1.6201
1.5670
1.5680
1.6300
1.6300
1.6300
1.6300
1.6310
1.6350
1.6400
1.6450
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.6945
1.7550
1.7550
1.7550
1.7550
1.7570
1.8045
1.8170
1.6634
1.6929
1.7126
1.7559
1.6320
1.7059
1.7059
1.6929
1.6940
1.7570
1.6935
1.6945
1.8150
1.6945
1.6201
1.6614
.394
.315
.315
.232
.313
.312
.311
.272
.272
.272
.256
.250
.218
.219
.250
.250
.313
.188
.219
.250
.250
.188
.219
.250
.285
.313
.375
.295
.188
.219
.250
.313
.375
.375
.313
.315
.394
.394
.295
.257
.250
.354
.315
.305
.380
.305
.305
.297
.257
.256
.315
45°
45°
45°
45°
45°
45°
45°
45°
37°
37°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45° R
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
295
Part Number Series
30000
70000
31227+5 (1772E-2+.005) 71227+5
31712 (1750-58)
71712
31717 (1750-59)
71717
31426
71426
31696 (1654E-1)
71696
31696+5 (1654E-1+.005) 71696+5
31698 (1671E-1)
71698
31803
71803
30868 (1669E-1)
70868
31254 (1669E-1+.020)
71254
31413
71413
31486 (1562-5)
71486
30841 (1562-12)
70841
30648 (1625-1)
70648
30506 (1625-2)
70506
30646 (1625-2)
70646
30732 (1625-14)
70732
31046 (1625-33)
71046
30648+5 (1625-1+.005)
70648+5
31695 (1640E-1)
71695
30864
70864
31042 (1687-29)
71042
30677 (1687-5)
70677
30678 (1687-7)
70678
30720 (1687-18)
70720
30679 (1687-8)
70679
30871 (1687-12)
70871
31707 (1687-56)
71707
31711 (1750-29)
71711
30652 (1750-7)
70652
30653 (1750-8)
70653
30654 (1750-9)
70654
31129 (1750-0)
71129
31825
71825
30903 (1812-15)
70903
31421
71421
39049
79049
39051
79051
31381
71381
31687 (1625-59)
71687
31085
71085
31084
71084
31391 (1687-40)
71391
30190 (1687-51)
70190
30127 (1750-67)
70127
31213 (1687-51)
71213
31288 (1687-51)
71288
31376
71376
31708 (1687-58)
71708
31813
71813
31810
71810
(1772E-2N+.005)
(1750-58N)
(1750-59N)
(1654E-1N)
(1654E-1N+.005)
(1671E-1N)
(1669E-1N)
(1669E-1+.020)
(1562-5N)
(1562-12N)
(1625-1N)
(1625-2N)
(1625-2N)
(1625-14N)
(1625-33N)
(1625-1N+.005)
(1640E-1N)
(1687-29N)
(1687-5N)
(1687-7N)
(1687-18N)
(1687-10N)
(1687-12N)
(1687-56N)
(1750-29N)
(1750-7N)
(1750-8N)
(1750-9N)
(1750-0N)
(1812-15N)
(1625-59N)
(1687-40N)
(1687-51N)
(1750-67N)
(1687-51N)
(1687-51N)
(1687-58N)
PROGRESSIVE LISTING
BY INSIDE DIAMETER
1 21/32
Actual
OD
VALVE SEAT
1.358
1.360
1.360
1.366
1.367
1.367
1.367
1.368
1.372
1.372
1.374
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.378
1.378
1.378
1.378
1.380
1.384
1.384
1.385
1.385
1.385
1.390
1.390
1.392
1.397
1.398
1.398
ID Top Cutter
Taper
OD
PROGRESSIVE LISTING
BY INSIDE DIAMETER
VALVE SEAT
ID
1.398
1.398
1.400
1.400
1.405
1.405
1.406
1.406
1.406
1.406
1.406
1.409
1.410
1.410
1.410
1.412
1.413
1.417
1.417
1.417
1.417
1.417
1.417
1.417
1.417
1.418
1.420
1.430
1.430
1.435
1.435
1.437
1.437
1.437
1.437
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
ID Top Cutter
Taper
OD
1.632
1 3/4
1 13/16
1 13/16
1 5/8
1 11/16
1 11/16
1 11/16
1 25/32
1.560
1.560
1 3/4
1 3/4
1 11/16
1 3/4
1.505
1 3/4
1 5/8
1.546
1.546
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1.546
1.610
1 3/4
1 3/4
Actual
OD
Depth
Seat
Angle
1.6811
1.8110
1.6090
1.7570
1.8190
1.8195
1.6300
1.6920
1.6920
1.6925
1.7460
1.7874
1.6875
1.7560
1.7570
1.6380
1.7000
1.6772
1.7028
1.7126
1.7323
1.7323
1.7520
1.7520
1.8504
1.7969
1.6750
1.6925
1.7550
1.8200
1.8740
1.7560
1.8303
1.8504
1.8555
1.6310
1.6870
1.6905
1.6905
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.6930
1.6970
1.6980
1.7030
1.7550
1.7550
.335
.394
.250
.420
.315
.315
.250
.250
.305
.313
.375
.297
.365
.315
.315
.218
.375
.315
.315
.394
.276
.394
.394
.433
.472
.390
.302
.248
.215
.314
.382
.302
.375
.394
.394
.219
.365
.181
.200
.156
.188
.219
.250
.313
.365
.365
.365
.365
.365
.203
.219
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
20°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
296
Part Number Series
30000
70000
31811
71811
31188 (1811E-1)
71188
31679 (1609E-1)
71679
31265
71265
31137 (1812-54)
71137
31243 (1812-54)
71243
31482 (1625-39)
71482
30670 (1687-1)
70670
31116 (1687-51)
71116
31490 (1687-40)
71490
31309
71309
31427
71427
31828 (1687E-4)
71828
31246 (1750-63)
71246
30165 (1750-63)
70165
31694 (1638E-1)
71694
31331
71331
31373 (1678E-1)
71373
31021
71021
39070
79070
31375
71375
39052
79052
39071
79071
39055
79055
39065
79065
31088
71088
31699 (1670E-1)
71699
31869 (1692E-1)
71869
31713 (1750-57)
71713
31319 (1812-52)
71319
31378
71378
31221 (1750-60)
71221
31090 (1828E-1)
71090
31228 (1850E-2)
71228
31228+5 (1850E-2+.005) 71228+5
31234 (1625-17)
71234
31846 (1687E-1)
71846
31702 (1691E-1)
71702
31703 (1691E-2)
71703
30872 (1687-15)
70872
30873 (1687-16)
70873
30664 (1687-2)
70664
30673 (1687-3)
70673
30733 (1687-13)
70733
31846+5 (1687E-1+.005) 71846+5
31704 (1693E-1)
71704
31846+10 (1687E-1+.010) 71846+10
31704+5 (1693E-1+.005) 71704+5
31704+10 (1693E-1+.010) 71704+10
30891 (1750-12)
70891
30655 (1750-3)
70655
(1811E-1N)
(1609E-1N)
(1812-54N)
(1812-54N)
(1625-39N)
(1687-1N)
(1687-51N)
(1687-40N)
(1687E-4N)
(1750-63N)
(1750-63N)
(1638E-1N)
(1678E-1N)
(1670E-1N)
(1692E-1N)
(1750-57N)
(1812-52N)
(1750-60N)
(1828E-1N)
(1850E-2N)
(1850E-2N+.005)
(1625-17N)
(1687E-1N)
(1691E-1N)
(1691E-2N)
(1687-15N)
(1687-16N)
(1687-2N)
(1687-3N)
(1687-13N)
(1687E-1N+.005)
(1693E-1N)
(1687E-1N+.010)
(1693E-1N+.005)
(1693E-1N+.010)
(1750-12N)
(1750-3N)
ID
Depth
Seat
Angle
1 3/4
1 3/4
1 3/4
1 3/4
1 13/16
1 13/16
1 13/16
1 13/16
1 11/16
1.7550
1.7550
1.7550
1.7560
1.8170
1.8175
1.8180
1.8180
1.6920
1.7913
1.8190
1.8195
1.7560
1.6940
1.8120
1.8170
1.8195
1.8220
1.7570
1.7330
1.7570
1.7205
1.7421
1.7570
1.7618
1.7717
1.7717
1.7913
1.8567
1.8898
1.7750
1.7570
1.7570
1.6830
1.7570
1.8180
1.6831
1.7840
1.7810
1.7860
1.7863
1.7910
1.8898
1.8170
1.7825
1.8190
1.8190
1.8195
1.7815
1.8110
1.8190
.250
.302
.313
.188
.313
.375
.219
.250
.365
.374
.316
.315
.310
.297
.197
.197
.295
.197
.277
.365
.307
.335
.315
.312
.335
.335
.472
.472
.339
.472
.300
.275
.425
.312
.276
.313
.295
.290
.311
.311
.288
.311
.394
.250
.340
.305
.334
.307
.315
.472
.157
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
30°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
1.500
1.500
1.515
1.508
1.515
1.617
1 13/16
1 13/16
1 3/4
1 11/16
1 13/16
1 13/16
1 3/4
1 3/4
1 3/4
1.553
1 3/4
1 3/4
1 3/4
1 13/16
1 25/32
1 13/16
1.600
1.628
1 13/16
1 13/16
1 13/16
1 13/16
297
Part Number Series
30000
70000
30656 (1750-4)
70656
31117 (1750-60)
71117
30657 (1750-5)
70657
31045 (1750-11)
71045
30905 (1812-11)
70905
31459 (1812-0)
71459
31269 (1812-17)
71269
30904 (1812-7)
70904
31916
71916
31801
71801
31327 (1812-52)
71327
31284 (1812-52)
71284
31215 (1750-61)
71215
30881 (1687-54)
70881
31843 (1812E-4)
71843
31843+5 (1812E-4+.005) 71843+5
31728 (1812-57)
71728
31843+10 (1812E-4+.010) 71843+10
31714 (1750-64)
71714
31710 (1733E-2)
71710
31718 (1750-52)
71718
31814
71814
31086 (1744E-1)
71086
31317 (1750-52)
71317
31392
71392
31393
71393
39057
79057
39059
79059
31339
71339
39069
79069
31721 (1775E-1)
71721
31719 (1750-66)
71719
30129
70129
31700
71700
31715 (1750-65)
71715
30680 (1812-21)
70680
31390
71390
31230
71230
31257 (1781E-1)
71257
31257+5 (1781E-1+.005) 71257+5
31087 (1784E-1)
71087
31257+10 (1781E-1+.010) 71257+10
31189 (1890E-2)
71189
31089 (1812-6)
71089
31722 (1782E-1)
71722
30030 (1812-50)
70030
31831
71831
31237 (1812-50)
71237
31404 (1781E-1)
71404
39060
79060
31307
71307
(1750-4N)
(1750-60N)
(1750-5N)
(1750-11N)
(1812-11N)
(1812-0N)
(1812-17N)
(1812-7N)
(1812-52N)
(1812-52N)
(1750-61N)
(1687-54N)
(1812E-4N)
(1812E-4N+.005)
(1812-57N)
(1812E-4N+.010)
(1750-64N)
(1733E-2N)
(1750-52N)
(1744E-1N)
(1750-52N)
(1775E-1N)
(1750-66N)
(1750-65N)
(1812-21N)
(1781E-1N)
(1781E-1N+.005)
(1784E-1N)
(1781E-1N+.010)
(1890E-2N)
(1812-6N)
(1782E-1N)
(1812-50N)
(1812-50N)
(1781E-1N)
PROGRESSIVE LISTING
BY INSIDE DIAMETER
Actual
OD
VALVE SEAT
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.439
1.440
1.440
1.440
1.445
1.450
1.450
1.450
1.450
1.450
1.454
1.455
1.455
1.457
1.457
1.457
1.457
1.457
1.457
1.457
1.457
1.457
1.458
1.460
1.460
1.466
1.468
1.468
1.469
1.469
1.476
1.476
1.476
1.476
1.476
1.484
1.490
1.490
1.490
1.490
1.496
1.496
1.496
ID Top Cutter
Taper
OD
PROGRESSIVE LISTING
BY INSIDE DIAMETER
VALVE SEAT
ID
1.496
1.496
1.496
1.498
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.505
1.505
1.516
1.525
1.530
1.531
1.535
1.535
1.535
1.535
1.535
1.535
1.535
1.540
1.540
1.540
1.540
1.540
1.540
1.540
1.555
1.561
1.562
1.562
1.562
1.562
1.563
1.563
ID Top Cutter
Taper
OD
1 11/16
1 3/4
1 3/4
1 3/4
1 3/4
1.625
1.555
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
1 15/16
1.689
1 7/8
1.710
1 15/16
1 13/16
1 3/4
1 13/16
1 13/16
1 13/16
1 15/16
1.655
1 13/16
1 7/8
1 7/8
2"
1 13/16
1 13/16
Actual
OD
Depth
Seat
Angle
1.8307
1.8358
1.8898
1.8530
1.6925
1.7550
1.7550
1.7550
1.7570
1.7600
1.8170
1.8180
1.8180
1.8180
1.8180
1.8180
1.8195
1.8800
1.8800
1.8800
1.8800
1.8810
1.9440
1.8161
1.8820
1.9291
1.9460
1.8195
1.7570
1.7815
1.8195
1.8504
1.8661
1.8701
1.9685
1.9690
1.8125
1.8170
1.8175
1.8220
1.8225
1.8270
1.9420
1.8315
1.9080
1.8170
1.8800
1.8800
2.0055
1.8180
1.8180
.472
.285
.433
.273
.250
.219
.250
.313
.255
.219
.375
.219
.219
.250
.281
.312
.278
.219
.219
.250
.375
.313
.313
.280
.380
.394
.425
.307
.312
.295
.293
.472
.315
.472
.394
.413
.365
.365
.365
.365
.365
.365
.315
.280
.397
.365
.250
.312
.250
.219
.250
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
30°
30°
30°
30°
30°
45°
30°
45°
45°
45°
45°
45°
45°
45°
298
Part Number Series
30000
70000
39062
79062
31433
71433
39068
79068
31734 (1853E-1)
71734
31491 (1687-33)
71491
30658 (1750-2)
70658
30659 (1750-1)
70659
30660 (1750-13)
70660
31720 (1750-50)
71720
30658+5 (1750-2+.005)
70658+5
31131 (1812-18)
71131
30530 (1812-3)
70530
30668 (1812-2)
70668
30672 (1812-5)
70672
30741 (1812-55)
70741
30907 (1812-9)
70907
31285 (1812-55)
71285
31736 (1875-13)
71736
31738 (1875-8)
71738
30919 (1875-9)
70919
31091 (1875-0)
71091
30920 (1875-14)
70920
31166 (1937-20)
71166
31355
71355
30138 (1875-53)
70138
31190 (1929E-1)
71190
31322
71322
31239 (1812-51)
71239
31494 (1750-40)
71494
31472
71472
31727 (1812-56)
71727
39063
79063
31377
71377
39066
79066
31192
71192
31753 (1969E-2)
71753
31827 (1812E-3)
71827
31726 (1817E-3)
71726
31827+5 (1812E-3+.005) 71827+5
31726+5 (1817E-3+.005) 71726+5
31827+10 (1812E-3+.010) 71827+10
31726+10 (1817E-3+.010) 71726+10
31747 (1937-51)
71747
31731 (1831E-1)
71731
31834
71834
30542 (1818E-1)
70542
30509 (1875-2)
70509
30923 (1875-11)
70923
31762 (2000-10)
71762
30667 (1812-4)
70667
30671 (1812-1)
70671
(1853E-1N)
(1687-33N)
(1750-2N)
(1750-1N)
(1750-13N)
(1750-50N)
(1750-2N+.005)
(1812-18N)
(1812-3N)
(1812-2N)
(1812-5N)
(1812-55N)
(1812-9N)
(1812-55N)
(1875-13N)
(1875-8N)
(1875-9N)
(1875-0N)
(1875-14N)
(1937-20N)
(1875-53N)
(1929E-1N)
(1812-51N)
(1750-40N)
(1812-56N)
(1969E-2N)
(1812E-3N)
(1817E-3N)
(1812E-3N+.005)
(1817E-3N+.005)
(1812E-3N+.010)
(1817E-3N+.010)
(1937-51N)
(1831E-1N)
(1818E-1N)
(1875-2N)
(1875-11N)
(2000-10N)
(1812-4N)
(1812-1N)
ID
Depth
Seat
Angle
1 13/16
1.8180
1.8230
1.8465
1.8490
1.8515
1.8565
1.8800
1.8810
1.9430
1.9430
1.9430
2.0060
1.9450
1.8035
1.8195
1.9435
1.9435
1.8810
1.8819
1.8820
1.8820
1.8820
1.8820
1.8898
1.8917
1.9440
2.0079
2.0079
2.0500
2.0508
1.9425
1.8195
1.7560
1.8810
1.8810
1.8810
2.0180
1.8150
1.9620
1.8140
1.8820
1.8580
2.0472
1.8820
1.9910
1.8175
1.8225
1.8800
1.8810
1.8810
1.8810
.313
.250
.281
.365
.281
.281
.438
.219
.219
.250
.313
.313
.380
.312
.283
.379
.379
.317
.315
.290
.317
.317
.320
.472
.315
.380
.217
.413
.340
.364
.203
.450
.278
.250
.313
.328
.281
.250
.365
.315
.252
.209
.413
.290
.309
.219
.219
.188
.219
.250
.281
45°
45°
30°
45°
30°
30°
30°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
1.662
1.685
1.719
1.692
1.732
1.719
1 27/32
1 7/8
1 7/8
1 15/16
1 15/16
1 15/16
2"
1 15/16
1 13/16
1 15/16
1 15/16
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
1 15/16
1 15/16
1 13/16
1 3/4
1 7/8
1 7/8
1 7/8
1 7/8
1 7/8
1 13/16
1
1
1
1
7/8
7/8
7/8
7/8
299
Part Number Series
30000
70000
31000 (1812-10)
71000
30671+5 (1812-1+.005)
70671+5
31732 (1847E-1)
71732
31266
71266
31732+5 (1847E-1+.005) 71732+5
31732+10 (1847E-1+.010) 71732+10
31739 (1880E-2)
71739
31238 (1875-19)
71238
30933 (1937-27)
70933
30932 (1937-4)
70932
31496 (1937-3)
71496
31280 (2000-11)
71280
31324 (1937-52)
71324
31723 (1803E-1)
71723
31729 (1819E-1)
71729
31250 (1937-52)
71250
31281 (1937-52)
71281
31217 (1875-51)
71217
31394 (1875-51)
71394
31741 (1875-54)
71741
31034 (1875-51)
71034
31256 (1875-51)
71256
31316 (1875-51)
71316
39067
79067
31913
71913
30141 (1937-52)
70141
31415
71415
31193 (2008E-2)
71193
31297
71297
31816
71816
31748 (1937-12)
71748
31730 (1812-60)
71730
31209 (1750-51)
71209
30687 (1875-7)
70687
30688 (1875-15)
70688
30689 (1875-23)
70689
31765 (2018E-1)
71765
31725 (1815E-1)
71725
31752 (1962E-1)
71752
31724 (1814E-1)
71724
31092 (1875-56)
71092
31735 (1858E-1)
71735
31194 (2047E-1)
71194
31740 (1875-52)
71740
31755 (1991E-1)
71755
31283 (1812-12)
71283
31283+5 (1812-12+.005) 71283+5
31737 (1875-38)
71737
30681 (1875-6)
70681
30682 (1875-1)
70682
30683 (1875-4)
70683
(1812-10N)
(1812-1N+.005)
(1847E-1N)
(1847E-1N+.005)
(1847E-1N+.010)
(1880E-2N)
(1875-19N)
(1937-27N)
(1937-4N)
(1937-3N)
(2000-11N)
(1937-52N)
(1803E-1N)
(1819E-1N)
(1937-52N)
(1937-52N)
(1875-51N)
(1875-51N)
(1875-54N)
(1875-51N)
(1875-51N)
(1875-51N)
(1937-52N)
(2008E-2N)
(1937-12N)
(1812-60N)
(1750-51N)
(1875-7N)
(1875-15N)
(1875-23N)
(2018E-1N)
(1815E-1N)
(1962E-1N)
(1814E-1N)
(1875-56N)
(1858E-1N)
(2047E-1N)
(1875-52N)
(1991E-1N)
(1812-12N)
(1812-12N+.005)
(1875-38N)
(1875-6N)
(1875-1N)
(1875-4N)
PROGRESSIVE LISTING
BY INSIDE DIAMETER
Actual
OD
VALVE SEAT
1.563
1.563
1.563
1.563
1.563
1.563
1.563
1.563
1.563
1.563
1.563
1.563
1.570
1.571
1.571
1.573
1.573
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.578
1.590
1.594
1.594
1.594
1.594
1.594
1.595
1.595
1.600
1.600
1.608
1.614
1.615
1.616
1.625
1.625
1.625
1.625
1.625
1.625
ID Top Cutter
Taper
OD
PROGRESSIVE LISTING
BY INSIDE DIAMETER
VALVE SEAT
ID
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.630
1.635
1.640
1.642
1.645
1.650
1.650
1.654
1.654
1.656
1.658
1.660
1.674
1.685
1.688
1.688
1.688
1.688
1.688
1.688
1.688
1.688
1.688
1.688
1.688
1.688
1.688
1.688
1.688
1.688
ID Top Cutter
Taper
OD
1
1
1
1
7/8
7/8
7/8
7/8
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
2"
2"
2"
2"
2"
2"
2"
2"
2"
2 1/16
2"
1 7/8
1 7/8
1 13/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
2"
2"
2"
2"
2"
2"
2"
Actual
OD
Depth
Seat
Angle
1.8810
1.8810
1.8810
1.8820
1.9120
1.9430
1.9430
1.9430
1.9430
1.9435
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0110
2.0680
2.0060
1.8560
1.8820
1.8780
1.9000
1.9000
1.9000
1.9291
2.0866
1.8185
1.9730
1.9520
1.9445
2.0040
1.9430
1.9430
1.9440
1.9460
2.0030
2.0035
2.0040
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0080
2.0110
.313
.375
.453
.352
.281
.250
.281
.312
.375
.219
.219
.250
.281
.281
.297
.313
.344
.375
.438
.297
.281
.280
.280
.280
.282
.250
.220
.300
.315
.413
.307
.300
.345
.276
.317
.188
.219
.250
.379
.282
.438
.438
.219
.234
.250
.282
.313
.375
.438
.282
.282
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
0°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
30°
30°
30°
45°
45°
45°
45°
45°
45°
45°
30°
45°
300
Part Number Series
30000
70000
30684 (1875-17)
70684
30685 (1875-18)
70685
30686 (1875-27)
70686
31742 (1875-55)
71742
31746 (1912E-1)
71746
31497 (1937-2)
71497
31749 (1937-5)
71749
31134 (1937-7)
71134
31471 (1937-8)
71471
31262 (1937-6)
71262
30723 (2000-12)
70723
30724 (2000-13)
70724
30725 (2000-6)
70725
31506
71506
30726 (2000-3)
70726
30727 (2000-14)
70727
30728 (2000-21)
70728
30729 (2000-0)
70729
30730 (2000-27)
70730
30726+5 (2000-3+.005)
70726+5
31767 (2062-7)
71767
NA
71829
31268
71268
31495 (1875-50)
71495
31835
71835
31743 (1900E-2)
71743
31745 (1900E-3)
71745
31744 (1900E-1)
71744
31191
71191
31195 (2087E-2)
71195
31211 (1812-51)
71211
31754 (1973E-1)
71754
31751 (1952E-1)
71751
31750 (1937-53)
71750
31761 (2004E-3)
71761
30935 (1937-23)
70935
30936 (1937-17)
70936
30560 (1937-1)
70560
31118 (1937-31)
71118
31757 (2003E-1)
71757
31758 (2004E-2)
71758
31759 (2004E-4)
71759
30698 (2000-15)
70698
30704 (2006E-3)
70704
30699 (2000-16)
70699
30700 (2006E-1)
70700
30701 (2000-29)
70701
30702 (2000-4)
70702
30703 (2000-35)
70703
31757+5 (2003E-1+.005) 71757+5
30700+5 (2006E-1+.005) 70700+5
(1875-17N)
(1875-18N)
(1875-27N)
(1875-55N)
(1912E-1N)
(1937-2N)
(1937-5N)
(1937-7N)
(1937-8N)
(1937-6N)
(2000-12N)
(2000-13N)
(2006E-6C)
(2000-3N)
(2000-14N)
(2000-21N)
(2000-0N)
(2000-27N)
(2000-3N+.005)
(2062-7N)
(2006E-6C)
(1875-50N)
(1900E-2N)
(1900E-3N)
(1900E-1N)
(2087E-2N)
(1812-51N)
(1973E-1N)
(1952E-1N)
(1937-53N)
(2004E-3N)
(1937-23N)
(1937-17N)
(1937-1N)
(1937-31N)
(2003E-1N)
(2004E-2N)
(2004E-4N)
(2000-15N)
(2006E-3N)
(2000-16N)
(2006E-1N)
(2000-29N)
(2000-4N)
(2000-35N)
(2003E-1N+.005)
(2006E-1N+.005)
ID
2 1/16
2 3/16
2 1/16
2"
1 15/16
2"
2"
2"
2"
2"
2"
2"
2"
2"
2 1/16
2 1/16
2 1/8
2 1/8
2 1/8
2 1/8
2 1/16
2 1/8
2 1/8
Depth
Seat
Angle
2.0130
2.0160
2.0680
2.1930
2.0880
2.0673
2.0906
2.0906
2.1102
2.1102
2.1339
2.0902
2.1098
2.1370
2.1360
2.0010
2.0060
2.0110
2.0040
2.0276
2.1654
2.1654
2.1700
1.9435
2.0055
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0680
2.0685
2.1305
2.1305
2.1305
2.1305
2.1701
2.1339
2.1050
2.0485
2.1600
2.0680
2.1200
2.1300
2.1300
2.1400
2.1940
2.0050
.282
.282
.281
.281
.299
.354
.354
.394
.354
.394
.339
.382
.402
.400
.319
.385
.385
.385
.345
.217
.433
.472
.433
.219
.156
.188
.219
.250
.281
.313
.375
.438
.453
.281
.219
.219
.250
.281
.375
.336
.287
.375
.344
.300
.250
.375
.250
.375
.375
.250
.219
30°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
30°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
301
Part Number Series
30000
70000
31757+10 (2003E-1+.010) 71757+10
30700+10 (2006E-1+.010) 70700+10
31768 (2062-8)
71768
31784 (2187-13)
71784
31771 (2088E-1)
71771
31401
71401
31430
71430
31424
71424
31447
71447
31441
71441
31338
71338
31475
71475
31093
71093
31504
71504
31781 (2136E-1)
71781
31756 (2001E-1)
71756
31756+5 (2001E-1+.005) 71756+5
31756+10 (2001E-1+.010) 71756+10
31760 (2004E-1)
71760
31341
71341
31783 (2165E-1)
71783
31141
71141
31783+5 (2165E-1+.005) 71783+5
31242 (1937-19)
71242
31763 (2000-22)
71763
30690 (2000-36)
70690
30691 (2000-1)
70691
30692 (2000-17)
70692
30693 (2000-20)
70693
30694 (2000-18)
70694
30695 (2000-19)
70695
30696 (2000-37)
70696
30697 (2000-28)
70697
31769 (2062-2)
71769
31249 (2062-25)
71249
31777 (2125-11)
71777
31776 (2125-7)
71776
31774 (2125-10)
71774
31775 (2125-0)
71775
31351
71351
31417
71417
31310
71310
31766 (2049E-1)
71766
31271
71271
30963 (2062-3)
70963
31454
71454
30557 (2125-1)
70557
31330 (2125-33)
71330
31830
71830
31135 (2187-1)
71135
30952 (2000-7)
70952
(2003E-1N+.010)
(2006E-1N+.010)
(2062-8N)
(2187-13N)
(2088E-1N)
(2136E-1N)
(2001E-1N)
(2001E-1N+.005)
(2001E-1N+.010)
(2004E-1N)
(2165E-1N)
(2165E-1N+.005)
(1937-19N)
(2000-22N)
(2000-36N)
(2000-1N)
(2000-17N)
(2000-20N)
(2000-18N)
(2000-19N)
(2000-37N)
(2000-28N)
(2062-2N)
(2062-25N)
(2125-11N)
(2125-7N)
(2125-10N)
(2125-0N)
(2049E-1N)
(2062-3N)
(2125-1N)
(2125-33N)
(2187-1C)
(2000-7N)
PROGRESSIVE LISTING
BY INSIDE DIAMETER
2 3/16
2"
Actual
OD
VALVE SEAT
1.688
1.688
1.688
1.688
1.692
1.693
1.693
1.693
1.693
1.693
1.693
1.697
1.697
1.700
1.705
1.712
1.712
1.712
1.718
1.726
1.732
1.732
1.732
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.751
1.752
1.765
1.781
1.800
1.812
1.812
1.812
1.812
1.812
1.812
1.813
ID Top Cutter
Taper
OD
PROGRESSIVE LISTING
BY INSIDE DIAMETER
VALVE SEAT
ID
1.813
1.813
1.813
1.813
1.813
1.813
1.813
1.813
1.813
1.813
1.820
1.828
1.843
1.859
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.890
1.890
1.890
1.900
1.906
1.906
1.937
1.938
1.938
1.938
1.970
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.011
2.030
2.030
2.030
2.030
2.030
2.030
2.046
ID Top Cutter
Taper
OD
Actual
OD
Depth
Seat
Angle
2 1/16
2 1/16
2 1/16
2.0680
2.0680
2.0685
2.1290
2.1300
2.1305
2.1310
2.1310
2.1930
2.2555
2.2500
2.0150
2.2200
2.1500
2.1300
2.1300
2.1925
2.1935
2.2550
2.2555
2.2560
2.3680
2.3730
2.3780
2.2900
2.1300
2.1305
2.1930
2.1300
2.2555
2.2560
2.3500
2.3180
2.3180
2.3800
2.3810
2.3810
2.3819
2.3820
2.3860
2.3860
2.3910
2.3910
2.3657
2.3810
2.3810
2.3860
2.3860
2.3910
2.3910
2.4440
.188
.250
.250
.437
.313
.188
.219
.437
.281
.250
.375
.188
.312
.292
.219
.250
.250
.281
.375
.313
.281
.460
.460
.460
.375
.234
.250
.250
.188
.188
.219
.375
.250
.281
.188
.323
.323
.394
.281
.323
.323
.323
.323
.350
.323
.323
.323
.323
.323
.323
.299
45°
45°
45°
30°
45°
45°
45°
30°
45°
45°
45° R
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
20°
20°
20°
45° R
45°
45°
45°
45°
45°
45°
45° R
45°
45°
45°
30°
30°
45°
45°
30°
30°
30°
30°
45°
30°
30°
30°
30°
30°
30°
45°
1.875
1.895
2
2
2
2
2
2
1/8
1/8
1/8
1/8
3/16
1/4
Radius
2
2
2
2
2
2
2
1/8
1/8
3/16
3/16
1/4
1/4
1/4
Radius
2
2
2
2
2
2
1/8
1/8
3/16
1/8
1/4
1/4
2
2
2
2
2
2
2
5/16
5/16
3/8
3/8
3/8
3/8
3/8
Radius
2 3/8
2 3/8
2 7/16
302
Part Number Series
30000
70000
31770 (2062-30)
71770
30964 (2062-1)
70964
31260 (2062-1)
71260
31772 (2129E-1)
71772
31124 (2125-32)
71124
31779 (2125-38)
71779
31240 (2125-31)
71240
31780 (2131E-1)
71780
31785 (2187-2)
71785
31788 (2250-8)
71788
31335
71335
31764 (2015E-1)
71764
31786 (2220E-1)
71786
31782 (2150E-1)
71782
30974 (2125-34)
70974
30537 (2125-2)
70537
31499 (2187-12)
71499
30984 (2187-4)
70984
31787 (2250-13)
71787
31470 (2250-20)
71470
31252 (2250-2)
71252
31847 (2368E-2)
71847
31847+5 (2368E-2+.005) 71847+5
31847+10 (2368E-2+.010) 71847+10
31457
71457
31473
71473
31498 (2125-4)
71498
31282 (2187-27)
71282
31773 (2125-3)
71773
30989 (2250-1)
70989
31261 (2250-35)
71261
31456
71456
30991 (2312-9)
70991
31790 (2312-4)
71790
31791 (2375-1)
71791
31844 (2381E-1)
71844
NA
91844
31815
71815
30994 (2375-2)
70994
31844+5 (2381E-1+.005) 71844+5
NA
91844+5
31844+10 (2381E-1+.101) 71844+10
NA
91844+10
31476
71476
31845 (2381E-2)
71845
NA
91845
31845+5 (2381E-2+.005) 71845+5
NA
91845+5
31845+10 (2381E-2+.010) 71845+10
NA
91845+10
31792 (2444E-1)
71792
(2062-30N)
(2062-1N)
(2062-1N)
(2129E-1N)
(2125-32N)
(2125-38N)
(2125-31N)
(2131E-1N)
(2187-2N)
(2250-8N)
(2015E-1N)
(2220E-1N)
(2150E-1N)
(2125-34N)
(2125-2N)
(2187-12N)
(2187-4N)
(2250-13N)
(2250-20N)
(2250-2N)
(2368E-2N)
(2368E-2N+.005)
(2368E-2N+.010)
(2125-4N)
(2187-27N)
(2125-3N)
(2250-1N)
(2250-35N)
(2312-9N)
(2312-4N)
(2375-1N)
(2381E-1N)
(2381E-1C)
(2375-2N)
(2381E-1N+.005)
(2381E-1C+.005)
(2381E-1N+.010)
(2381E-1C+.010)
(2381E-2N)
(2381E-2C)
(2381E-2N+.005)
(2381E-2C+.005)
(2381E-2N+.010)
(2381E-2C+.010)
(2444E-1N)
1"
1
1
1
1
1
1
1
1
1
1
1
1
1
1/16
1/16
1/16
1/16
1/16
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
Actual
OD
ID
.9252
.9449
.9843
.9882
.9890
.9902
1.0045
1.0335
1.0437
1.0472
1.0492
1.0512
1.0551
1.0559
1.0681
1.0689
1.0690
1.0690
1.0695
1.0827
1.0898
1.0984
1.1024
1.1024
1.1024
1.1083
1.1102
1.1122
1.1220
1.1299
1.1300
1.1310
1.1320
1.1320
1.1320
1.1320
1.1320
1.1417
1.1417
1.1496
1.1516
1.1610
1.1614
1.1660
1.1661
1.1710
1.1732
1.1811
1.1811
1.1811
1.1811
0.709
0.709
0.787
0.787
0.787
0.787
0.750
0.827
0.827
0.827
0.827
0.787
0.827
0.807
0.871
0.787
0.781
0.790
0.870
0.866
0.874
0.906
0.787
0.807
0.866
0.866
0.890
0.890
0.866
0.871
0.875
0.750
0.825
0.830
0.854
0.890
0.900
0.827
0.906
0.906
0.874
0.910
0.906
0.910
0.809
0.910
0.945
0.787
0.866
0.906
0.945
ID Top
Taper
Depth
Seat
Angle
.236
.256
.276
.236
.236
.236
.188
.177
.189
.236
.217
.224
.244
.224
.254
.236
.250
.260
.195
.236
.250
.256
.315
.256
.394
.256
.236
.236
.394
.191
.219
.250
.285
.240
.237
.237
.325
.335
.394
.256
.250
.222
.394
.222
.280
.222
.236
.394
.335
.394
.335
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
30°
45°
30°
45°
45°
45°
45°
45°
303
Part Number Series
30000
70000
31357
71357
31167
71167
31446
71446
31346
71346
31002
71002
31349
71349
31600 (1000-1)
71600
31398
71398
31037
71037
31382
71382
31405
71405
31003
71003
31395
71395
31350
71350
31096 (1062-50)
71096
31383
71383
31142 (1062-4)
71142
31047 (1062-50)
71047
31602 (1062-51)
71602
31915
71915
31429
71429
31804
71804
31168 (1102E-1)
71168
31428
71428
39006
79006
31396
71396
31807
71807
31812
71812
39007
79007
31097 (1125-5)
71097
30754 (1125-1)
70754
31143 (1125-10)
71143
31048 (1125-52)
71048
31603 (1125-55)
71603
31604 (1125-51)
71604
31607 (1125-53)
71607
31605 (1125-54)
71605
31169 (1142E-2)
71169
39008
79008
31410
71410
31431
71431
31608 (1161E-1)
71608
39009
79009
31608+5 (1161E-1+.005) 71608+5
31358
71358
31608+10 (1161E-1+.010) 71608+10
31444
71444
39011
79011
31170 (1181E-1)
71170
39010
79010
31411
71411
(1000-1N)
(1062-50N)
(1062-4N)
(1062-50N)
(1062-51N)
(1102E-1N)
(1125-5N)
(1125-1N)
(1125-10N)
(1125-52N)
(1125-55N)
(1125-51N)
(1125-53N)
(1125-54N)
(1142E-2N)
(1161E-1N)
(1161E-1N+.005)
(1161E-1N+.010)
(1181E-1N)
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
Cutter
OD
VALVE SEAT
DURA-BOND VALVE SEAT PROGRESSIVE LISTING BY OUTSIDE DIAMETER
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
VALVE SEAT
Cutter
OD
1
1
1
1
1
1
1
1
1
1
1
1
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1 15/64
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
Actual
OD
ID
1.1819
1.1850
1.1858
1.1870
1.1870
1.1870
1.1920
1.1920
1.1921
1.1933
1.1933
1.1933
1.1940
1.1940
1.1940
1.1940
1.1945
1.1945
1.1995
1.2008
1.2008
1.2045
1.2205
1.2205
1.2205
1.2205
1.2252
1.2303
1.2402
1.2407
1.2441
1.2480
1.2550
1.2550
1.2550
1.2551
1.2559
1.2559
1.2560
1.2560
1.2560
1.2560
1.2560
1.2560
1.2560
1.2560
1.2570
1.2570
1.2570
1.2570
1.2570
0.925
0.984
0.984
0.945
0.984
0.984
1.000
1.000
0.875
0.871
0.929
0.933
0.875
0.905
0.934
0.938
0.880
0.935
0.935
0.906
0.984
0.935
0.827
0.906
0.945
0.984
0.910
0.984
0.945
0.941
1.024
1.024
1.000
1.028
1.055
1.000
0.933
0.996
0.875
0.906
0.910
0.910
0.938
1.000
1.000
1.000
0.905
0.910
0.930
0.970
0.976
ID Top
Taper
1.070
1.070
1.000
Depth
Seat
Angle
.244
.248
.248
.354
.200
.248
.188
.219
.250
.254
.256
.254
.250
.257
.260
.250
.280
.235
.235
.394
.256
.235
.394
.335
.394
.237
.283
.315
.394
.335
.236
.256
.250
.227
.250
.250
.254
.254
.250
.313
.281
.288
.188
.219
.250
.313
.230
.285
.325
.270
.180
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
304
Part Number Series
30000
70000
31049
71049
31345
71345
31004
71004
31436
71436
31445
71445
31005
71005
31609 (1187-1)
71609
31610 (1187-7)
71610
31352 (1187-2)
71352
31098
71098
31435 (1187-52)
71435
31099 (1187-52)
71099
31144 (1187-2)
71144
31146 (1187-51)
71146
31050 (1187-52)
71050
31145 (1187-5)
71145
31611 (1187-54)
71611
31868 (1187-53)
71868
31868+5 (1187-53+.005) 71868+5
39012
79012
31051
71051
31868+10 (1187-53+.010) 71868+10
39014
79014
31171 (1221E-2)
71171
39013
79013
31448
71448
31354
71354
31414
71414
39015
79015
31434
71434
31384
71384
31409
71409
30764 (1250-3)
70764
31043
71043
31052
71052
31359 (1250-3)
71359
31105 (1250-58)
71105
31100 (1250-55)
71100
31151 (1250-50)
71151
31149
71149
31333 (1250-52)
71333
31334 (1250-52)
71334
31152 (1250-4)
71152
31147 (1250-1)
71147
31150 (1250-3)
71150
31148 (1250-12)
71148
30230 (1250-56)
70230
31054 (1250-52)
71054
31612 (1250-63)
71612
31613 (1250-64)
71613
31614 (1250-61)
71614
(1187-1N)
(1187-7N)
(1187-2N)
(1187-52N)
(1187-52N)
(1187-2N)
(1187-51N)
(1187-52N)
(1187-5N)
(1187-54N)
(1187-53N)
(1187-53N+.005)
(1187-53N+.010)
(1221E-2N)
(1250-3N)
(1250-3N)
(1250-58N)
(1250-55N)
(1250-50N)
(1250-52N)
(1250-52N)
(1250-4N)
(1250-1N)
(1250-3N)
(1250-12N)
(1250-56N)
(1250-52N)
(1250-63N)
(1250-64N)
(1250-61N)
Actual
OD
ID
1
1
1
1
1
1
1
1.2570
1.2570
1.2570
1.2570
1.2570
1.2570
1.2570
1.2598
1.2598
1.2598
1.2598
1.2602
1.2620
1.2670
1.2670
1.2720
1.2724
1.2736
1.2795
1.2795
1.2820
1.2827
1.2835
1.2854
1.2854
1.2854
1.2992
1.2992
1.2992
1.2992
1.2992
1.2992
1.3050
1.3051
1.3051
1.3051
1.3071
1.3170
1.3170
1.3170
1.3170
1.3170
1.3170
1.3175
1.3181
1.3181
1.3189
1.3189
1.3190
1.3190
1.3190
0.982
0.982
1.000
1.010
1.022
1.023
1.028
0.866
0.945
0.945
0.984
0.984
0.975
0.975
0.982
0.975
1.024
0.906
0.984
1.063
0.975
1.063
1.083
0.984
1.004
1.024
0.905
0.906
0.984
0.984
1.023
1.024
1.048
1.063
1.063
1.102
1.083
1.000
1.046
1.046
1.046
1.046
1.063
1.000
0.996
1.059
1.023
1.063
0.975
0.977
1.000
1
1
1
1
1
1
1
1
1
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
1 5/16
1 5/16
1 5/16
ID Top
Taper
1.065
1.024
1.142
1.142
Depth
Seat
Angle
.212
.329
.305
.257
.225
.273
.257
.394
.335
.354
.394
.315
.250
.250
.320
.250
.236
.248
.394
.217
.250
.236
.354
.236
.315
.335
.315
.394
.177
.335
.394
.256
.227
.287
.315
.276
.276
.219
.219
.227
.250
.313
.219
.250
.254
.254
.394
.354
.280
.300
.250
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
30°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
305
Part Number Series
30000
70000
31618 (1250-57)
71618
31615 (1250-59)
71615
31616 (1250-62)
71616
31619 (1250-54)
71619
30205
70205
31620 (1250-60)
71620
31617 (1250-53)
71617
39017
79017
31172 (1260E-1)
71172
31311
71311
39016
79016
31808
71808
31621 (1262E-1)
71621
31621+5 (1262E-1+.005) 71621+5
31313
71313
31621+10 (1262E-1+.010) 71621+10
31347
71347
31450
71450
39018
79018
31914
71914
31502
71502
31403
71403
31800
71800
31360
71360
31006
71006
31007
71007
31425
71425
39020
79020
31136
71136
31173 (1299E-1)
71173
39019
79019
31348
71348
30739
70739
31821
71821
31819
71819
31008
71008
31123
71123
31622 (1312-3)
71622
30735 (1312-6)
70735
30734
70734
30736 (1312-9)
70736
30737
70737
31289 (1312-6)
71289
31056 (1312-4)
71056
31106 (1312-4)
71106
31101 (1312-9)
71101
39021
79021
31293
71293
31058 (1312-68)
71058
31340
71340
31154 (1312-4)
71154
(1250-57N)
(1250-59N)
(1250-62N)
(1250-54N)
(1250-60N)
(1250-53N)
(1260E-1N)
(1262E-1N)
(1262E-1N+.005)
(1262E-1N+.010)
(1299E-1N)
(1312-3N)
(1312-6N)
(1312-9N)
(1312-6N)
(1312-4N)
(1312-4N)
(1312-9N)
(1312-68N)
(1312-4N)
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
Cutter
OD
VALVE SEAT
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
VALVE SEAT
Cutter
OD
Actual
OD
ID
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.3190
1.3190
1.3190
1.3190
1.3190
1.3190
1.3190
1.3190
1.3195
1.3195
1.3195
1.3195
1.3195
1.3195
1.3195
1.3195
1.3228
1.3268
1.3268
1.3307
1.3386
1.3386
1.3386
1.3387
1.3425
1.3433
1.3445
1.3480
1.3484
1.3484
1.3504
1.3530
1.3583
1.3610
1.3634
1.3661
1.3670
1.3701
1.3701
1.3776
1.3780
1.3780
1.3780
1.3780
1.3780
1.3799
1.3800
1.3800
1.3800
1.3800
1.3800
1.000
1.020
1.042
1.045
1.062
1.063
1.085
1.123
0.965
0.980
1.044
1.060
1.060
1.065
1.070
1.070
1.082
1.063
1.126
1.126
0.945
1.024
1.063
1.102
1.083
1.025
1.102
1.087
1.063
1.126
1.063
1.087
1.063
1.100
0.984
1.114
1.108
1.142
1.142
1.124
0.984
1.024
1.102
1.102
1.102
1.063
1.062
1.063
1.063
1.063
1.125
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
1 11/32
1 11/32
1 11/32
1 23/64
1
1
1
1
1
1
3/8
3/8
3/8
3/8
3/8
3/8
ID Top
Taper
1.220
Radius
Depth
Seat
Angle
.313
.258
.238
.316
.188
.313
.305
.300
.235
.293
.273
.230
.275
.285
.257
.330
.287
.315
.250
.250
.394
.335
.394
.177
.236
.299
.236
.200
.315
.250
.315
.200
.394
.306
.394
.295
.245
.256
.283
.313
.394
.354
.197
.335
.394
.253
.219
.188
.250
.313
.188
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45° R
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
306
Part Number Series
30000
70000
31155 (1312-5)
71155
31623 (1312-66)
71623
30779 (1312-67)
70779
30563 (1312-64)
70563
30775 (1312-1)
70775
31153 (1312-10)
71153
30562 (1312-56)
70562
31320
71320
31625 (1312-63)
71625
31626 (1312--53)
71626
31624 (1312-59)
71624
31629 (1312-65)
71629
31628 (1312-61)
71628
31630 (1312--62)
71630
31632 (1312-60)
71632
31631 (1312-54)
71631
31397
71397
31009
71009
31010
71010
31438
71438
39023
79023
31174 (1339E-2)
71174
31273
71273
31306
71306
31385
71385
31361
71361
31449
71449
31633 (1348E-1)
71633
31060
71060
31011
71011
31356
71356
31633+5 (1348E-1+.005) 71633+5
39024
79024
31312
71312
31035
71035
31061
71061
31263
71263
31809
71809
31362
71362
31114
71114
39026
79026
31175 (1378E-1)
71175
31408
71408
31824
71824
39025
79025
31062 (1375-7)
71062
31125 (1375-6)
71125
30786 (1375-3)
70786
30788 (1375-7)
70788
30787 (1375-18)
70787
30790 (1375-4)
70790
(1312-5N)
(1312-66N)
(1312-67N)
(1312-64N)
(1312-1N)
(1312-10N)
(1312-56N)
(1312-63N)
(1312-53N)
(1312-59N)
(1312-65N)
(1312-61N)
(1312-62N)
(1312-60N)
(1312-54N)
(1339E-2N)
(1348E-1N)
(1348E-1N+.005)
(1378E-1N)
(1375-7N)
(1375-6N)
(1375-3N)
(1375-7N)
(1375-18N)
(1375-4N)
Actual
OD
ID
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.3800
1.3800
1.3800
1.3803
1.3807
1.3807
1.3810
1.3810
1.3810
1.3820
1.3820
1.3820
1.3820
1.3820
1.3820
1.3820
1.3820
1.3820
1.3839
1.3839
1.3878
1.3976
1.3976
1.3976
1.4008
1.4010
1.4016
1.4016
1.4040
1.4055
1.4055
1.4055
1.4114
1.4173
1.4173
1.4173
1.4210
1.4220
1.4236
1.4252
1.4272
1.4305
1.4370
1.4405
1.4410
1.4421
1.4421
1.4421
1.4421
1.4425
1.4425
1.125
1.125
1.125
1.093
1.059
1.121
0.938
1.125
1.188
1.000
1.000
1.022
1.057
1.100
1.102
1.107
1.120
1.130
1.138
1.181
1.102
1.102
1.142
1.161
1.200
1.125
1.142
1.142
1.138
1.079
1.181
1.181
1.181
1.024
1.063
1.142
1.125
1.152
1.152
1.220
1.142
1.156
1.141
1.186
1.203
1.125
1.125
1.126
1.188
1.125
1.125
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1 13/32
1 27/64
1 7/16
1
1
1
1
1
1
7/16
7/16
7/16
7/16
7/16
7/16
ID Top
Taper
1.160
1.260
Radius
1.329
Depth
Seat
Angle
.219
.250
.375
.250
.254
.254
.313
.266
.219
.280
.410
.230
.240
.300
.260
.237
.325
.304
.307
.291
.315
.394
.394
.374
.220
.266
.315
.374
.254
.300
.339
.354
.244
.394
.354
.394
.266
.315
.250
.295
.315
.160
.394
.313
.215
.250
.354
.315
.250
.250
.313
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45° R
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
30°
45°
45°
45°
45°
45°
45°
307
Part Number Series
30000
70000
30558 (1375-1)
70558
30791 (1375-2)
70791
30792 (1375-0)
70792
31363 (1375-2)
71363
31102 (1375-50)
71102
31103 (1375-50)
71103
31156 (1375-10)
71156
31157 (1375-5)
71157
31248 (1375-22)
71248
31064 (1375-64)
71064
31063 (1375-52)
71063
31636 (1375-54)
71636
31637 (1375-63)
71637
31139 (1375-62)
71139
30238 (1375-56)
70238
31638 (1375-60)
71638
31635 (1375-55)
71635
31837
71837
31820
71820
31805
71805
31065
71065
39027
79027
31274
71274
31294
71294
31337
71337
31838
71838
31012
71012
31277
71277
31264
71264
31479
71479
31423
71423
31443
71443
31399
71399
39029
79029
31176 (1417E-1)
71176
39028
79028
31839
71839
31066
71066
31412
71412
31121
71121
31420
71420
31640 (1431E-1)
71640
39030
79030
31111 (1437-25)
71111
31641 (1441E-1)
71641
31380 (1442E-1)
71380
31364 (1437-53)
71364
31013 (1437-56)
71013
31402 (1437-5)
71402
30802 (1437-8)
70802
30803 (1437-6)
70803
(1375-1N)
(1375-2N)
(1375-0N)
(1375-2N)
(1375-50N)
(1375-50N)
(1375-10N)
(1375-5N)
(1375-22N)
(1375-64N)
(1375-52N)
(1375-54N)
(1375-63N)
(1375-62N)
(1375-56N)
(1375-60N)
(1375-55N)
(1417E-1N)
(1431E-1N)
(1437-25N)
(1441E-1N)
(1442E-1N)
(1437-53N)
(1437-56N)
(1437-5N)
(1437-8N)
(1437-6N)
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
Cutter
OD
VALVE SEAT
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
VALVE SEAT
Cutter
OD
Actual
OD
ID
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.4425
1.4425
1.4425
1.4425
1.4425
1.4429
1.4433
1.4440
1.4440
1.4440
1.4440
1.4440
1.4440
1.4440
1.4440
1.4440
1.4440
1.4440
1.4440
1.4440
1.4445
1.4445
1.4445
1.4445
1.4445
1.4445
1.4445
1.4445
1.4445
1.4445
1.4445
1.4445
1.4445
1.4445
1.4449
1.4449
1.4470
1.4471
1.4521
1.4567
1.4567
1.4567
1.4567
1.4577
1.4626
1.4630
1.4646
1.4685
1.4750
1.4764
1.4764
1.126
1.126
1.188
1.188
1.219
1.130
1.059
1.100
1.105
1.135
1.140
1.180
1.180
1.181
1.188
1.188
1.200
1.230
1.250
1.250
1.090
1.095
1.100
1.100
1.120
1.125
1.140
1.142
1.150
1.150
1.162
1.162
1.162
1.175
1.142
1.220
1.219
1.125
1.125
1.102
1.181
1.181
1.220
1.098
1.217
1.220
1.181
1.142
1.240
1.181
1.220
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
1 15/32
ID Top
Taper
1.250
1.339
Depth
Seat
Angle
.188
.219
.156
.219
.219
.315
.254
.315
.322
.316
.305
.255
.305
.280
.219
.250
.297
.250
.219
.313
.354
.237
.227
.293
.300
.257
.237
.336
.257
.410
.214
.230
.310
.260
.315
.295
.344
.250
.250
.354
.315
.394
.394
.352
.307
.354
.276
.315
.227
.394
.335
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
0°
45°
45°
308
Part Number Series
30000
70000
31225 (1437-10)
71225
30801 (1437-4)
70801
31642 (1437-13)
71642
31030 (1437-3)
71030
31031 (1437-2)
71031
31407 (1437-68)
71407
31107 (1437-72)
71107
31329 (1437-56)
71329
30806 (1437-65)
70806
30809 (1437-68)
70809
31643 (1437-50)
71643
31645 (1437-67)
71645
31644 (1437-59)
71644
31646 (1437-63)
71646
31159 (1437-3)
71159
31161 (1437-5)
71161
30818 (1437-62)
70818
31067 (1437-54)
71067
30556 (1437-1)
70556
31160 (1437-30)
71160
31652 (1437-53)
71652
31653 (1437-58)
71653
31654 (1437-64)
71654
31655 (1437-57)
71655
31647 (1437-66)
71647
31648 (1437-60)
71648
31656 (1437-69)
71656
31658 (1437-73)
71658
31659 (1437-72)
71659
31660 (1437-52)
71660
31661 (1437-71)
71661
31650 (1437-74)
71650
31649 (1437-61)
71649
31651 (1437-75)
71651
31439 (1437-68)
71439
31440 (1437-62)
71440
31664 (1442E-2)
71664
31380+5 (1442E-1+.005) 71380+5
31380+10 (1442E-1+.010) 71380+10
31068 (1457E-2)
71068
31069
71069
39031
79031
31275
71275
31113 (1457E-2)
71113
31822
71822
31908
71908
31070
71070
31365
71365
31044
71044
39033
79033
31071
71071
(1437-10N)
(1437-4N)
(1437-13N)
(1437-3N)
(1437-2N)
(1437-68N)
(1437-72N)
(1437-56N)
(1437-65N)
(1437-68N)
(1437-50N)
(1437-67N)
(1437-59N)
(1437-63N)
(1437-3N)
(1437-5N)
(1437-62N)
(1437-54N)
(1437-1N)
(1437-30N)
(1437-53N)
(1437-58N)
(1437-64N)
(1437-57N)
(1437-66N)
(1437-60N)
(1437-69N)
(1437-73N)
(1437-72N)
(1437-52N)
(1437-71N)
(1437-74N)
(1437-61N)
(1437-75N)
(1437-68N)
(1437-62N)
(1442E-2N)
(1442E-1N+.005)
(1442E-1N+.010)
(1457E-2N)
(1457E-2N)
Actual
OD
ID
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.4764
1.4772
1.4777
1.4791
1.4803
1.4803
1.4823
1.4823
1.4843
1.4850
1.4860
1.4862
1.4961
1.4961
1.4961
1.4961
1.4961
1.5000
1.5008
1.5043
1.5043
1.5043
1.5045
1.5045
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5050
1.5051
1.5051
1.5059
1.5059
1.5059
1.240
1.232
1.213
1.187
1.200
1.287
1.220
1.240
1.220
1.260
1.270
1.220
1.102
1.142
1.181
1.220
1.260
1.188
1.148
1.125
1.188
1.250
1.188
1.313
1.100
1.125
1.125
1.125
1.125
1.140
1.188
1.188
1.215
1.215
1.215
1.215
1.215
1.215
1.215
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.122
1.220
1.183
1.246
1.280
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
ID Top
Taper
1.319
1.225
1.250
1.344
1.275
1.390
Depth
Seat
Angle
.335
.335
.154
.313
.276
.283
.276
.315
.315
.237
.290
.335
.394
.354
.276
.394
.335
.250
.283
.253
.313
.281
.313
.188
.316
.188
.219
.250
.313
.325
.218
.250
.219
.250
.280
.305
.310
.318
.345
.188
.219
.240
.250
.282
.313
.375
.343
.315
.254
.254
.295
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
309
Part Number Series
30000
70000
31386
71386
31315
71315
31305
71305
31353
71353
31400
71400
31379
71379
31014
71014
31818
71818
31015
71015
30738
70738
31665 (1486E-1)
71665
31387
71387
39035
79035
31178 (1496E-1)
71178
31038
71038
31276
71276
31823
71823
31198
71198
31366
71366
31072
71072
31342 (1500-10)
71342
31343 (1500-28)
71343
31032 (1500-10)
71032
31290 (1500-29)
71290
30045 (1500-57)
70045
30706 (1500-5)
70706
30707 (1500-8)
70707
30708 (1500-25)
70708
30709 (1500-9)
70709
30105 (1500-65)
70105
30823 (1500-2)
70823
30822 (1500-6)
70822
30705 (1500-4)
70705
30722 (1500-11)
70722
30015 (1500-50)
70015
30721
70721
30716 (1500-62)
70716
30717 (1500-58)
70717
30718 (1500-63)
70718
30710 (1500-13)
70710
30711 (1500-1)
70711
30024 (1500-52)
70024
30712 (1500-3)
70712
30713 (1500-28)
70713
30714 (1500-12)
70714
30715 (1500-0)
70715
31367
71367
31073 (1500-61)
71073
31108 (1500-6)
71108
31109 (1500-3)
71109
31419
71419
(1486E-1N)
(1496E-1N)
(1500-10N)
(1500-28N)
(1500-10N)
(1500-29N)
(1500-57N)
(1500-5N)
(1500-8N)
(1500-25N)
(1500-9N)
(1500-65N)
(1500-2N)
(1500-6N)
(1500-4N)
(1500-11N)
(1500-50N)
(1500-62N)
(1500-58N)
(1500-63N)
(1500-13N)
(1500-1N)
(1500-52N)
(1500-3N)
(1500-28N)
(1500-12N)
(1500-0N)
(1500-61N)
(1500-6N)
(1500-3N)
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
Cutter
OD
VALVE SEAT
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
VALVE SEAT
Cutter
OD
Actual
OD
ID
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.5060
1.5060
1.5060
1.5060
1.5060
1.5060
1.5060
1.5060
1.5060
1.5060
1.5060
1.5060
1.5060
1.5060
1.5067
1.5070
1.5070
1.5070
1.5070
1.5070
1.5070
1.5070
1.5070
1.5070
1.5070
1.5070
1.5070
1.5157
1.5157
1.5157
1.5160
1.5209
1.5248
1.5256
1.5260
1.5335
1.5354
1.5354
1.5354
1.5354
1.5354
1.5354
1.5365
1.5410
1.5413
1.5472
1.5551
1.5551
1.5591
1.5630
1.5630
1.175
1.179
1.180
1.180
1.188
1.195
1.195
1.200
1.210
1.215
1.220
1.230
1.255
1.313
1.210
1.100
1.175
1.180
1.180
1.182
1.203
1.210
1.210
1.210
1.239
1.250
1.295
1.220
1.220
1.220
1.250
1.220
1.183
1.220
1.250
1.221
1.141
1.181
1.181
1.220
1.260
1.299
1.255
1.327
1.366
1.260
1.260
1.299
1.319
1.250
1.299
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1 33/64
ID Top
Taper
1.235
1.307
1.280
1.345
1.240
1.328
1.263
1.318
1.294
1.320
1.333
1.276
Depth
Seat
Angle
.236
.293
.214
.307
.313
.315
.360
.315
.345
.330
.310
.278
.318
.219
.344
.315
.236
.300
.305
.275
.280
.315
.345
.345
.225
.344
.262
.335
.343
.394
.250
.285
.394
.335
.250
.335
.394
.276
.354
.335
.394
.315
.359
.256
.232
.315
.394
.335
.374
.250
.339
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
310
Part Number Series
30000
70000
31205 (1500-77)
71205
31247 (1500-68)
71247
31207 (1500-74)
71207
31258 (1500-54)
71258
31162 (1500-10)
71162
31326 (1500-58)
71326
31501
71501
31241 (1500-58)
71241
31214 (1500-63)
71214
31832
71832
31204 (1500-62)
71204
31244 (1500-73)
71244
31235 (1500-69)
71235
31255 (1500-30)
71255
31314 (1500-63)
71314
31074 (1500-57)
71074
30824 (1500-77)
70824
31666 (1500-75)
71666
30031 (1500-54)
70031
31668 (1500-72)
71668
31484 (1500-70)
71484
30191 (1500-61)
70191
30148 (1500-63)
70148
31291 (1500-63)
71291
30204
70204
31485 (1505E-1)
71485
31667 (1500-79)
71667
31388
71388
31368
71368
39036
79036
31670 (1516E-1)
71670
31432
71432
31036
71036
31389
71389
31840
71840
31016
71016
39038
79038
31369
71369
31179 (1535E-1)
71179
31180
71180
39037
79037
31370
71370
31671 (1536E-2)
71671
31416
71416
31426
71426
31075
71075
39039
79039
31076
71076
31295
71295
31197
71197
31422
71422
(1500-77N)
(1500-68N)
(1500-74N)
(1500-54N)
(1500-10N)
(1500-58N)
(1500-58N)
(1500-63N)
(1500-62N)
(1500-73N)
(1500-69N)
(1500-30N)
(1500-63N)
(1500-57N)
(1500-77N)
(1500-75N)
(1500-54N)
(1500-72N)
(1500-70N)
(1500-61N)
(1500-63N)
(1500-63N)
(1505E-1N)
(1500-79N)
(1516E-1N)
(1535E-1N)
(1536E-2N)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
Actual
OD
ID
1.5630
1.5650
1.5657
1.5669
1.5670
1.5670
1.5670
1.5670
1.5673
1.5680
1.5680
1.5680
1.5680
1.5680
1.5680
1.5680
1.5680
1.5680
1.5680
1.5680
1.5680
1.5680
1.5680
1.5680
1.5681
1.5685
1.5685
1.5685
1.5685
1.5685
1.5685
1.5690
1.5690
1.5690
1.5690
1.5690
1.5690
1.5690
1.5695
1.5695
1.5695
1.5695
1.5695
1.5695
1.5695
1.5695
1.5700
1.5730
1.5730
1.5748
1.5748
1.299
1.299
1.186
1.250
1.250
1.250
1.344
1.375
1.250
1.188
1.250
1.250
1.250
1.250
1.250
1.312
1.312
1.312
1.312
1.312
1.313
1.313
1.313
1.375
1.183
1.188
1.220
1.255
1.255
1.265
1.290
1.125
1.180
1.230
1.245
1.255
1.300
1.315
1.170
1.180
1.200
1.219
1.220
1.246
1.260
1.265
1.243
1.312
1.312
1.141
1.181
ID Top
Taper
1.390
1.390
1.372
1.392
1.345
1.356
1.320
Depth
Seat
Angle
.354
.335
.376
.313
.188
.337
.219
.250
.253
.313
.219
.250
.281
.313
.317
.219
.219
.250
.250
.313
.188
.219
.280
.218
.254
.313
.344
.319
.319
.280
.324
.313
.305
.310
.352
.320
.256
.270
.267
.316
.293
.317
.344
.230
.233
.280
.354
.219
.250
.394
.374
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
60°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
311
Part Number Series
30000
70000
31442
71442
31802
71802
31112 (1562-0)
71112
31344 (1562-17)
71344
31870 (1562-16)
71870
31833
71833
31033 (1562-3)
71033
31486 (1562-5)
71486
31077 (1562-7)
71077
30839 (1562-11)
70839
30640 (1562-6)
70640
30645 (1562-7)
70645
30740 (1562-46)
70740
30647 (1562-17)
70647
30719 (1562-17)
70719
30541 (1562-9)
70541
30643 (1562-1)
70643
30503 (1562-2)
70503
30644 (1562-4)
70644
30731 (1562-18)
70731
30840 (1562-36)
70840
30838 (1562-8)
70838
31267 (1562-37)
71267
30841 (1562-12)
70841
31104 (1562-31)
71104
31253 (1562-11)
71253
31222 (1562-54)
71222
31199 (1562-67)
71199
31259 (1562-67)
71259
31210 (1562-66)
71210
31251 (1562-74)
71251
31163 (1562-28)
71163
31079 (1562-70)
71079
31078
71078
31328 (1562-51)
71328
31140 (1562-67)
71140
31080 (1562-76)
71080
31138
71138
31673 (1562-77)
71673
31674 (1562-72)
71674
31675 (1562-75)
71675
31287 (1562-69)
71287
31292 (1562-54)
71292
31676 (1562-57)
71676
31677 (1562-73)
71677
31286 (1562-66)
71286
31318 (1562-51)
71318
30643+5 (1562-1+.005)
70643+5
30644+5 (1562-4+.005)
70644+5
39041
79041
31181 (1575E-3)
71181
(1562-0N)
(1562-17N)
(1562-16N)
(1562-3N)
(1562-5N)
(1562-7N)
(1562-11N)
(1562-6N)
(1562-7N)
(1562-46N)
(1562-17N)
(1562-17N)
(1562-9N)
(1562-1N)
(1562-2N)
(1562-4N)
(1562-18N)
(1562-36N)
(1562-8N)
(1562-37N)
(1562-12N)
(1562-31N)
(1562-11N)
(1562-54N)
(1562-67N)
(1562-67N)
(1562-66N)
(1562-74N)
(1562-28N)
(1562-70N)
(1562-51N)
(1562-67N)
(1562-76N)
(1562-77N)
(1562-72N)
(1562-75N)
(1562-69N)
(1562-54N)
(1562-57N)
(1562-73N)
(1562-66N)
(1562-51N)
(1562-1N+.005)
(1562-4N+.005)
(1575E-3N)
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
Cutter
OD
VALVE SEAT
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
VALVE SEAT
Cutter
OD
1 19/32
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
Actual
OD
ID
1.5748
1.5748
1.5780
1.5780
1.5823
1.5827
1.5827
1.5827
1.5846
1.5945
1.5984
1.6000
1.6090
1.6090
1.6142
1.6142
1.6142
1.6142
1.6201
1.6201
1.6220
1.6245
1.6250
1.6260
1.6280
1.6285
1.6285
1.6290
1.6300
1.6300
1.6300
1.6300
1.6300
1.6300
1.6300
1.6300
1.6300
1.6300
1.6300
1.6300
1.6300
1.6300
1.6300
1.6300
1.6300
1.6300
1.6300
1.6300
1.6300
1.6310
1.6310
1.260
1.319
1.312
1.313
1.180
1.319
1.339
1.368
1.358
1.260
1.339
1.282
1.313
1.400
1.181
1.220
1.299
1.339
1.374
1.398
1.319
1.322
1.313
1.320
1.344
1.348
1.357
1.330
1.188
1.250
1.250
1.250
1.250
1.250
1.280
1.312
1.313
1.313
1.313
1.313
1.313
1.334
1.344
1.348
1.375
1.375
1.375
1.375
1.406
1.280
1.298
ID Top
Taper
1.460
1.450
Depth
Seat
Angle
.394
.354
.219
.250
.413
.374
.295
.272
.287
.394
.276
.299
.219
.250
.394
.335
.394
.295
.256
.256
.260
.375
.250
.375
.250
.365
.249
.282
.375
.219
.250
.313
.344
.375
.315
.188
.219
.250
.281
.313
.395
.313
.250
.218
.219
.250
.250
.313
.250
.219
.317
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
312
Part Number Series
30000
70000
39040
79040
31296
71296
30643+10 (1562-1+.010)
70643+10
30644+10 (1562-4+.010)
70644+10
31081
71081
31278
71278
31017
71017
31803
71803
31418
71418
39042
79042
31018
71018
31371 (1600E-1)
71371
31841
71841
31679 (1609E-1)
71679
39044
79044
31182
71182
39043
79043
31039
71039
31413
71413
31813
71813
31437
71437
30855 (1624E-1)
70855
31196
71196
31372 (1624E-1)
71372
31680 (1628E-2)
71680
31681 (1628E-1)
71681
31682 (1628E-3)
71682
31836
71836
31683 (1625-8)
71683
30661 (1625-9)
70661
30662 (1625-6)
70662
30663 (1625-7)
70663
31684 (1625-28)
71684
30853 (1625-29)
70853
31685 (1625-58)
71685
31455 (1625-30)
71455
30649 (1625-4)
70649
30650 (1625-3)
70650
31488 (1625-18)
71488
30651 (1625-10)
70651
30854 (1625-20)
70854
30642 (1630E-1)
70642
31489 (1625-5)
71489
30857 (1625-11)
70857
30648 (1625-1)
70648
30506 (1625-2)
70506
30646 (1625-2)
70646
30732 (1625-14)
70732
31482 (1625-39)
71482
31233
71233
31218 (1625-56)
71218
(1562-1N+.010)
(1562-4N+.010)
(1600E-1N)
(1609E-1N)
(1624E-1N)
(1624E-1N)
(1628E-2N)
(1628E-1N)
(1628E-3N)
(1625-8N)
(1625-9N)
(1625-6N)
(1625-7N)
(1625-28N)
(1625-29N)
(1625-58N)
(1625-30N)
(1625-4N)
(1625-3N)
(1625-18N)
(1625-10N)
(1625-20N)
(1630E-1N)
(1625-5N)
(1625-11N)
(1625-1N)
(1625-2N)
(1625-2N)
(1625-14N)
(1625-39N)
(1625-56N)
Actual
OD
ID
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.6310
1.6310
1.6310
1.6310
1.6320
1.6320
1.6320
1.6320
1.6320
1.6320
1.6320
1.6320
1.6320
1.6320
1.6339
1.6340
1.6340
1.6350
1.6360
1.6380
1.6385
1.6386
1.6400
1.6417
1.6450
1.6460
1.6535
1.6535
1.6535
1.6535
1.6544
1.6560
1.6560
1.6565
1.6570
1.6594
1.6600
1.6614
1.6614
1.6634
1.6690
1.6694
1.6710
1.6732
1.6750
1.6772
1.6811
1.6830
1.6831
1.6870
1.6875
1.320
1.344
1.375
1.438
1.250
1.250
1.298
1.305
1.329
1.333
1.335
1.340
1.345
1.380
1.299
1.260
1.348
1.375
1.348
1.412
1.348
1.339
1.375
1.339
1.375
1.312
1.220
1.260
1.299
1.338
1.367
1.313
1.350
1.246
1.312
1.315
1.367
1.319
1.398
1.378
1.372
1.339
1.367
1.338
1.420
1.417
1.398
1.466
1.469
1.438
1.410
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
1 41/64
1 21/32
1 21/32
1 21/32
ID Top
Taper
1.422
1.340
1.524
Radius
Radius
Radius
1.429
1.546
Depth
Seat
Angle
.300
.313
.188
.219
.293
.312
.317
.227
.280
.237
.420
.307
.290
.257
.394
.394
.365
.219
.218
.218
.365
.315
.250
.250
.250
.350
.394
.374
.335
.394
.313
.375
.375
.375
.395
.205
.312
.413
.315
.315
.272
.177
.311
.394
.302
.315
.335
.312
.295
.365
.365
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45° R
45° R
45°
45° R
45°
45°
45°
45°
37°
45°
45°
45°
30°
45°
45°
45°
45°
45°
20°
313
Part Number Series
30000
70000
31223 (1625-62)
71223
31164 (1625-14)
71164
31046 (1625-33)
71046
31234 (1625-17)
71234
31688 (1625-60)
71688
31332 (1625-7)
71332
31236 (1625-56)
71236
31689 (1625-61)
71689
30860 (1625-54)
70860
31690 (1625-55)
71690
31691 (1625-64)
71691
31692 (1625-50)
71692
31686 (1625-63)
71686
31687 (1625-59)
71687
39045
79045
31323
71323
31681+5 (1628E-1+.005) 71681+5
30648+5 (1625-1+.005)
70648+5
30857+6 (1625-11+.006) 70857+6
31694 (1638E-1)
71694
31681+10 (1628E-1+.010) 71681+10
31019
71019
31695 (1640E-1)
71695
31020 (1640E-1)
71020
30864
70864
31226
71226
39047
79047
31183 (1654E-3)
71183
31184
71184
39046
79046
31696 (1654E-1)
71696
31272
71272
31279
71279
31478
71478
31697 (1657E-1)
71697
31336
71336
31696+5 (1654E-1+.005) 71696+5
31082
71082
31810
71810
31421
71421
30868 (1669E-1)
70868
31308
71308
31698 (1671E-1)
71698
39048
79048
31699 (1670E-1)
71699
31373 (1678E-1)
71373
31811
71811
31700
71700
31390
71390
31846 (1687E-1)
71846
31828 (1687E-4)
71828
(1625-62N)
(1625-14N)
(1625-33N)
(1625-17N)
(1625-60N)
(1625-7N)
(1625-56N)
(1625-61N
(1625-54N)
(1625-55N)
(1625-64N)
(1625-50N)
(1625-63N)
(1625-59N)
(1628E-1N+.005)
(1625-1N+.005)
(1625-11N+.006)
(1638E-1N)
(1628E-1N+.010)
(1640E-1N)
(1640E-1N)
(1654E-3N)
(1654E-1N)
(1657E-1N)
(1654E-1N+.005)
(1669E-1N)
(1671E-1N)
(1670E-1N)
(1678E-1N)
(1687E-1N)
(1687E-4N)
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
Cutter
OD
VALVE SEAT
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
VALVE SEAT
Cutter
OD
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
1 11/16
Actual
OD
ID
1.6890
1.6900
1.6905
1.6905
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.6920
1.6921
1.6925
1.6925
1.6925
1.6925
1.6929
1.6929
1.6929
1.6929
1.6929
1.6929
1.6930
1.6935
1.6940
1.6940
1.6940
1.6940
1.6945
1.6945
1.6945
1.6945
1.6945
1.6945
1.6950
1.6970
1.6980
1.7000
1.7028
1.372
1.250
1.438
1.438
1.312
1.312
1.312
1.312
1.375
1.375
1.375
1.375
1.375
1.375
1.406
1.406
1.438
1.438
1.438
1.438
1.438
1.438
1.439
1.312
1.344
1.406
1.430
1.500
1.260
1.299
1.339
1.350
1.378
1.385
1.438
1.390
1.300
1.335
1.385
1.450
1.281
1.338
1.344
1.375
1.390
1.397
1.250
1.438
1.438
1.413
1.417
ID Top
Taper
1.486
1.546
1.515
1.520
1.480
1.546
Depth
Seat
Angle
.272
.375
.181
.200
.219
.250
.313
.375
.188
.219
.250
.285
.313
.375
.250
.305
.156
.188
.219
.250
.313
.365
.365
.315
.313
.313
.248
.250
.394
.335
.325
.315
.394
.315
.365
.305
.360
.275
.305
.297
.313
.309
.375
.295
.305
.257
.375
.365
.365
.375
.315
37°
45°
30°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
314
Part Number Series
30000
70000
31254 (1669E-1+.020)
71254
31701 (1690E-1)
71701
31702 (1691E-1)
71702
31703 (1691E-2)
71703
30674 (1687-9)
70674
30675 (1687-6)
70675
30676 (1687-11)
70676
31270 (1687-0)
71270
31042 (1687-29)
71042
30677 (1687-5)
70677
30678 (1687-7)
70678
30720 (1687-18)
70720
30679 (1687-8)
70679
30871 (1687-12)
70871
30670 (1687-1)
70670
31116 (1687-51)
71116
30872 (1687-15)
70872
30873 (1687-16)
70873
30664 (1687-2)
70664
30673 (1687-3)
70673
30733 (1687-13)
70733
31846+5 (1687E-1+.005) 71846+5
31916
71916
31374 (1687-11)
71374
30559 (1687-4)
70559
31490 (1687-40)
71490
31869 (1692E-1)
71869
31491 (1687-33)
71491
39050
79050
31186
71186
31185 (1687-50)
71185
31406 (1687-4)
71406
39049
79049
31391 (1687-40)
71391
31704 (1693E-1)
71704
31213 (1687-51)
71213
31083 (1687-52)
71083
31705 (1687-57)
71705
30190 (1687-51)
70190
30881 (1687-54)
70881
31492
71492
31706 (1687-53)
71706
31493
71493
31707 (1687-56)
71707
31288 (1687-51)
71288
31708 (1687-58)
71708
31701+5 (1690E-1+.005) 71701+5
31846+10 (1687E-1+.010) 71846+10
31704+5 (1693E-1+.005) 71704+5
31331
71331
31021
71021
(1669E-1+.020)
(1690E-1N)
(1691E-1N)
(1691E-2N)
(1687-9N)
(1687-6N)
(1687-11N)
(1687-0N)
(1687-29N)
(1687-5N)
(1687-7N)
(1687-18N)
(1687-10N)
(1687-12N)
(1687-1N)
(1687-51N)
(1687-15N)
(1687-16N)
(1687-2N)
(1687-3N)
(1687-13N)
(1687E-1N+.005)
(1687-11N)
(1687-4N)
(1687-40N)
(1692E-1N)
(1687-33N)
(1687-50N)
(1687-4N)
(1687-40N)
(1693E-1N)
(1687-51N)
(1687-52N)
(1687-57N)
(1687-51N)
(1687-54N)
(1687-53N)
(1687-56N)
(1687-51N)
(1687-58N)
(1690E-1N+.005)
(1687E-1N+.010)
(1693E-1N+.005)
Actual
OD
ID
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.7030
1.7059
1.7059
1.7126
1.7126
1.7140
1.7205
1.7220
1.7323
1.7323
1.7323
1.7323
1.7330
1.7333
1.7421
1.7460
1.7520
1.7520
1.7520
1.7550
1.7550
1.7550
1.7550
1.7550
1.7550
1.7550
1.7550
1.7550
1.7550
1.7550
1.7550
1.7550
1.7550
1.7550
1.7550
1.7550
1.7559
1.7560
1.7560
1.7560
1.7560
1.7560
1.7560
1.7570
1.7570
1.7570
1.7570
1.7570
1.7570
1.7570
1.7570
1.438
1.384
1.384
1.378
1.417
1.313
1.457
1.357
1.299
1.339
1.417
1.417
1.455
1.335
1.457
1.406
1.181
1.417
1.417
1.250
1.312
1.313
1.360
1.375
1.375
1.375
1.375
1.430
1.438
1.438
1.438
1.438
1.438
1.500
1.500
1.500
1.378
1.313
1.410
1.437
1.438
1.445
1.594
1.323
1.360
1.375
1.385
1.400
1.410
1.454
1.455
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
ID Top
Taper
1.610
1.500
1.560
1.500
1.617
1.490
1.559
1.560
Depth
Seat
Angle
.365
.250
.354
.394
.394
.313
.335
.265
.394
.374
.276
.394
.365
.372
.315
.375
.394
.394
.433
.250
.395
.250
.315
.188
.219
.250
.313
.215
.203
.219
.250
.302
.313
.219
.250
.313
.295
.313
.315
.302
.188
.310
.278
.280
.315
.375
.380
.420
.315
.277
.307
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
315
Part Number Series
30000
70000
31704+10 (1693E-1+.010) 71704+10
31085
71085
31084
71084
39051
79051
39070
79070
31503
71503
31814
71814
31709 (1722E-1)
71709
39053
79053
31187 (1732E-1)
71187
31375
71375
39052
79052
31710 (1733E-2)
71710
31110 (1732E-1)
71110
31086 (1744E-1)
71086
31309
71309
39056
79056
39071
79071
39055
79055
31128 (1750-10)
71128
31232
71232
30889 (1750-6)
70889
31712 (1750-58)
71712
31711 (1750-29)
71711
30652 (1750-7)
70652
30653 (1750-8)
70653
30654 (1750-9)
70654
31713 (1750-57)
71713
30891 (1750-12)
70891
30655 (1750-3)
70655
30656 (1750-4)
70656
31117 (1750-60)
71117
30657 (1750-5)
70657
30658 (1750-2)
70658
30659 (1750-1)
70659
30660 (1750-13)
70660
31381
71381
31165 (1750-17)
71165
31246 (1750-63)
71246
31221 (1750-60)
71221
31045 (1750-11)
71045
31215 (1750-61)
71215
31209 (1750-51)
71209
31467 (1750-51)
71467
31717 (1750-59)
71717
31129 (1750-0)
71129
30127 (1750-67)
70127
31265
71265
30165 (1750-63)
70165
31714 (1750-64)
71714
31718 (1750-52)
71718
(1693E-1N+.010)
(1722E-1N)
(1732E-1N)
(1733E-2N)
(1732E-1N)
(1744E-1N)
(1750-10N)
(1750-6N)
(1750-58N)
(1750-29N)
(1750-7N)
(1750-8N)
(1750-9N)
(1750-57N)
(1750-12N)
(1750-3N)
(1750-4N)
(1750-60N)
(1750-5N)
(1750-2N)
(1750-1N)
(1750-13N)
(1750-17N)
(1750-63N)
(1750-60N)
(1750-11N)
(1750-61N)
(1750-51N)
(1750-51N)
(1750-59N)
(1750-0N)
(1750-67N)
(1750-63N)
(1750-64N)
(1750-52N)
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
Cutter
OD
VALVE SEAT
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
VALVE SEAT
Cutter
OD
Actual
OD
ID
1
1
1
1
1
1
1.7570
1.7570
1.7570
1.7570
1.7570
1.7570
1.7600
1.7600
1.7618
1.7717
1.7717
1.7717
1.7717
1.7750
1.7770
1.7810
1.7815
1.7815
1.7825
1.7840
1.7860
1.7863
1.7874
1.7910
1.7913
1.7913
1.7969
1.8035
1.8045
1.8110
1.8110
1.8110
1.8120
1.8125
1.8140
1.8150
1.8150
1.8161
1.8170
1.8170
1.8170
1.8170
1.8170
1.8170
1.8170
1.8175
1.8175
1.8175
1.8180
1.8180
1.8180
1.457
1.460
1.460
1.468
1.500
1.531
1.312
1.500
1.457
1.339
1.358
1.457
1.457
1.458
1.358
1.476
1.496
1.535
1.490
1.469
1.476
1.476
1.409
1.476
1.440
1.457
1.418
1.571
1.375
1.339
1.398
1.496
1.450
1.540
1.600
1.392
1.595
1.505
1.375
1.438
1.450
1.484
1.500
1.540
1.562
1.438
1.540
1.625
1.438
1.438
1.468
3/4
3/4
3/4
3/4
3/4
3/4
1 25/32
1 25/32
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
ID Top
Taper
1.553
Radius
1.655
Depth
Seat
Angle
.312
.275
.425
.276
.255
.312
.395
.219
.335
.472
.394
.335
.472
.300
.394
.311
.315
.295
.340
.290
.311
.288
.297
.311
.374
.472
.390
.312
.375
.472
.394
.472
.197
.365
.315
.297
.250
.280
.313
.313
.197
.250
.375
.365
.365
.375
.365
.219
.219
.250
.313
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45° R
45°
45°
45°
30°
30°
45°
45°
45°
45°
45°
45°
30°
45°
45°
30°
45°
45°
30°
45°
45°
45°
45°
316
Part Number Series
30000
70000
31317 (1750-52)
71317
31719 (1750-66)
71719
30129
70129
31715 (1750-65)
71715
31720 (1750-50)
71720
31494 (1750-40)
71494
31229
71229
30658+5 (1750-2+.005)
70658+5
31392
71392
39058
79058
31227 (1772E-2)
71227
31393
71393
39057
79057
31721 (1775E-1)
71721
31227+5 (1772E-2+.005) 71227+5
31257 (1781E-1)
71257
31404 (1781E-1)
71404
31472
71472
31722 (1782E-1)
71722
31230
71230
31257+5 (1781E-1+.005) 71257+5
31087 (1784E-1)
71087
31427
71427
31257+10 (1781E-1+.010) 71257+10
31801
71801
39059
79059
31088
71088
31723 (1803E-1)
71723
31825
71825
39061
79061
31188 (1811E-1)
71188
39060
79060
31843 (1812E-4)
71843
31827 (1812E-3)
71827
31724 (1814E-1)
71724
31376
71376
31725 (1815E-1)
71725
31355
71355
30903 (1812-15)
70903
30905 (1812-11)
70905
31843+5 (1812E-4+.005) 71843+5
31089 (1812-6)
71089
31131 (1812-18)
71131
31726 (1817E-3)
71726
30542 (1818E-1)
70542
31459 (1812-0)
71459
31827+5 (1812E-3+.005) 71827+5
31283 (1812-12)
71283
31269 (1812-17)
71269
30904 (1812-7)
70904
30680 (1812-21)
70680
(1750-52N)
(1750-66N)
(1750-65N)
(1750-50N)
(1750-40N)
(1750-2N+.005)
(1772E-2N)
(1775E-1N)
(1772E-2N+.005)
(1781E-1N)
(1781E-1N)
(1782E-1N)
(1781E-1N+.005)
(1784E-1N)
(1781E-1N+.010)
(1803E-1N)
(1811E-1N)
(1812E-4N)
(1812E-3N)
(1814E-1N)
(1815E-1N)
(1812-15N)
(1812-11N)
(1812E-4N+.005)
(1812-6N)
(1812-18N)
(1817E-3N)
(1818E-1N)
(1812-0N)
(1812E-3N+.005)
(1812-12N)
(1812-17N)
(1812-7N)
(1812-21N)
Actual
OD
ID
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1 13/16
1.8180
1.8180
1.8180
1.8180
1.8180
1.8180
1.8180
1.8180
1.8185
1.8190
1.8190
1.8190
1.8190
1.8190
1.8195
1.8195
1.8195
1.8195
1.8195
1.8195
1.8195
1.8195
1.8195
1.8200
1.8220
1.8220
1.8225
1.8225
1.8230
1.8270
1.8303
1.8307
1.8315
1.8358
1.8465
1.8490
1.8504
1.8504
1.8504
1.8515
1.8530
1.8555
1.8560
1.8565
1.8567
1.8580
1.8661
1.8701
1.8740
1.8780
1.8800
1.500
1.500
1.500
1.500
1.500
1.563
1.563
1.563
1.656
1.405
1.440
1.490
1.490
1.496
1.405
1.440
1.450
1.490
1.500
1.530
1.535
1.571
1.590
1.435
1.450
1.540
1.540
1.625
1.563
1.540
1.437
1.496
1.555
1.496
1.563
1.563
1.417
1.437
1.535
1.563
1.498
1.437
1.635
1.563
1.457
1.608
1.535
1.535
1.435
1.642
1.500
1 27/32
1 7/8
1 7/8
ID Top
Taper
1.625
1.508
1.600
1.632
1.515
1.628
1.555
1.710
1.505
1.662
Depth
Seat
Angle
.219
.219
.250
.281
.312
.219
.250
.313
.307
.315
.316
.305
.334
.157
.315
.315
.295
.307
.278
.307
.293
.283
.450
.314
.197
.365
.365
.219
.250
.365
.375
.472
.280
.285
.281
.365
.472
.394
.472
.281
.273
.394
.280
.281
.339
.209
.315
.472
.382
.282
.219
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
30°
30°
30°
45°
45°
30°
45°
45°
30°
45°
30°
45°
45°
45°
45°
30°
30°
45°
45°
30°
45°
30°
45°
45°
45°
45°
45°
317
Part Number Series
30000
70000
30530 (1812-3)
70530
30668 (1812-2)
70668
30672 (1812-5)
70672
30741 (1812-55)
70741
30907 (1812-9)
70907
30667 (1812-4)
70667
30671 (1812-1)
70671
31000 (1812-10)
71000
31211 (1812-51)
71211
31137 (1812-54)
71137
31327 (1812-52)
71327
30030 (1812-50)
70030
31831
71831
31307
71307
31243 (1812-54)
71243
31284 (1812-52)
71284
31728 (1812-57)
71728
31237 (1812-50)
71237
31285 (1812-55)
71285
31239 (1812-51)
71239
31727 (1812-56)
71727
31729 (1819E-1)
71729
31730 (1812-60)
71730
31319 (1812-52)
71319
31843+10 (1812E-4+.010) 71843+10
31726+5 (1817E-3+.005) 71726+5
31827+10 (1812E-3+.010) 71827+10
31283+5 (1812-12+.005) 71283+5
30671+5 (1812-1+.005)
70671+5
31726+10 (1817E-3+.010) 71726+10
31090 (1828E-1)
71090
39062
79062
31731 (1831E-1)
71731
31433
71433
31732 (1847E-1)
71732
31266
71266
39065
79065
31228 (1850E-2)
71228
39063
79063
31732+5 (1847E-1+.005) 71732+5
31734 (1853E-1)
71734
31228+5 (1850E-2+.005) 71228+5
31268
71268
31732+10 (1847E-1+.010) 71732+10
31339
71339
31735 (1858E-1)
71735
31377
71377
39066
79066
31378
71378
31835
71835
31736 (1875-13)
71736
(1812-3N)
(1812-2N)
(1812-5N)
(1812-55N)
(1812-9N)
(1812-4N)
(1812-1N)
(1812-10N)
(1812-51N)
(1812-54N)
(1812-52N)
(1812-50N)
(1812-54N)
(1812-52N)
(1812-57N)
(1812-50N)
(1812-55N)
(1812-51N)
(1812-56N)
(1819E-1N)
(1812-60N)
(1812-52N)
(1812E-4N+.010)
(1817E-3N+.005)
(1812E-3N+.010)
(1812-12N+.005)
(1812-1N+.005)
(1817E-3N+.010)
(1828E-1N)
(1831E-1N)
(1847E-1N)
(1850E-2N)
(1847E-1N+.005)
(1853E-1N)
(1850E-2N+.005)
(1847E-1N+.010)
(1858E-1N)
(1875-13N)
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
Cutter
OD
VALVE SEAT
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
VALVE SEAT
Cutter
OD
Actual
OD
ID
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.8800
1.8800
1.8800
1.8800
1.8800
1.8800
1.8800
1.8810
1.8810
1.8810
1.8810
1.8810
1.8810
1.8810
1.8810
1.8810
1.8810
1.8810
1.8810
1.8819
1.8820
1.8820
1.8820
1.8820
1.8820
1.8820
1.8820
1.8820
1.8820
1.8898
1.8898
1.8898
1.8898
1.8917
1.9000
1.9000
1.9000
1.9080
1.9120
1.9291
1.9291
1.9420
1.9425
1.9430
1.9430
1.9430
1.9430
1.9430
1.9430
1.9430
1.9430
1.500
1.500
1.500
1.562
1.562
1.563
1.625
1.500
1.563
1.575
1.594
1.594
1.594
1.625
1.625
1.625
1.625
1.625
1.625
1.575
1.505
1.575
1.575
1.575
1.575
1.600
1.615
1.625
1.640
1.457
1.476
1.496
1.575
1.575
1.645
1.650
1.650
1.561
1.625
1.516
1.654
1.540
1.578
1.563
1.563
1.563
1.625
1.625
1.625
1.625
1.688
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
ID Top
Taper
1.689
1.692
1.732
Depth
Seat
Angle
.219
.250
.375
.250
.312
.438
.188
.313
.219
.317
.250
.313
.328
.219
.250
.281
.313
.375
.453
.315
.380
.290
.317
.317
.320
.252
.290
.352
.280
.472
.394
.433
.472
.315
.250
.220
.300
.397
.281
.394
.315
.315
.203
.219
.250
.313
.250
.281
.312
.375
.188
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
318
Part Number Series
30000
70000
31738 (1875-8)
71738
30919 (1875-9)
70919
31091 (1875-0)
71091
30509 (1875-2)
70509
30923 (1875-11)
70923
31739 (1880E-2)
71739
31737 (1875-38)
71737
30920 (1875-14)
70920
31238 (1875-19)
71238
31217 (1875-51)
71217
30687 (1875-7)
70687
30688 (1875-15)
70688
30689 (1875-23)
70689
30681 (1875-6)
70681
30682 (1875-1)
70682
30683 (1875-4)
70683
30684 (1875-17)
70684
30685 (1875-18)
70685
30686 (1875-27)
70686
31394 (1875-51)
71394
30138 (1875-53)
70138
31741 (1875-54)
71741
31034 (1875-51)
71034
31256 (1875-51)
71256
31316 (1875-51)
71316
31092 (1875-56)
71092
31740 (1875-52)
71740
31742 (1875-55)
71742
31495 (1875-50)
71495
39069
79069
31189 (1890E-2)
71189
39068
79068
39067
79067
31913
71913
31743 (1900E-2)
71743
31745 (1900E-3)
71745
31744 (1900E-1)
71744
31834
71834
31746 (1912E-1)
71746
31190 (1929E-1)
71190
31191
71191
31747 (1937-51)
71747
31748 (1937-12)
71748
30933 (1937-27)
70933
30932 (1937-4)
70932
31496 (1937-3)
71496
31497 (1937-2)
71497
31749 (1937-5)
71749
31134 (1937-7)
71134
31471 (1937-8)
71471
30935 (1937-23)
70935
(1875-8N)
(1875-9N)
(1875-0N)
(1875-2N)
(1875-11N)
(1880E-2N)
(1875-38N)
(1875-14N)
(1875-19N)
(1875-51N)
(1875-7N)
(1875-15N)
(1875-23N)
(1875-6N)
(1875-1N)
(1875-4N)
(1875-17N)
(1875-18N)
(1875-27N)
(1875-51N)
(1875-53N)
(1875-54N)
(1875-51N)
(1875-51N)
(1875-51N)
(1875-56N)
(1875-52N)
(1875-55N)
(1875-50N)
(1890E-2N)
(1900E-2N)
(1900E-3N)
(1900E-1N)
(1912E-1N)
(1929E-1N)
(1937-51N)
(1937-12N)
(1937-27N)
(1937-4N)
(1937-3N)
(1937-2N)
(1937-5N)
(1937-7N)
(1937-8N)
(1937-23N)
Actual
OD
ID
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1 15/16
1.9430
1.9435
1.9435
1.9435
1.9435
1.9440
1.9440
1.9440
1.9445
1.9450
1.9460
1.9460
1.9520
1.9620
1.9685
1.9690
1.9730
1.9910
2.0010
2.0030
2.0035
2.0040
2.0040
2.0040
2.0050
2.0055
2.0055
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
2.0060
1.688
1.573
1.573
1.625
1.750
1.500
1.575
1.688
1.674
1.570
1.525
1.688
1.660
1.595
1.535
1.535
1.658
1.616
1.712
1.688
1.688
1.685
1.688
1.718
1.813
1.562
1.750
1.563
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.630
1.688
1.688
1.688
1.688
1.688
1.688
1.688
1.712
1.750
1.750
1.750
1.750
1.750
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
ID Top
Taper
1.719
1.719
1.685
Depth
Seat
Angle
.219
.379
.379
.219
.219
.313
.380
.250
.276
.380
.425
.379
.345
.365
.394
.413
.300
.309
.385
.282
.438
.317
.438
.345
.219
.250
.156
.313
.219
.250
.281
.281
.297
.313
.344
.375
.438
.280
.219
.234
.250
.282
.313
.375
.438
.385
.188
.219
.250
.281
.313
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
30°
30°
30°
30°
30°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
0°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
319
Part Number Series
30000
70000
30936 (1937-17)
70936
31250 (1937-52)
71250
31281 (1937-52)
71281
31262 (1937-6)
71262
31242 (1937-19)
71242
31166 (1937-20)
71166
30141 (1937-52)
70141
30560 (1937-1)
70560
31750 (1937-53)
71750
31324 (1937-52)
71324
31322
71322
31118 (1937-31)
71118
31751 (1952E-1)
71751
31752 (1962E-1)
71752
31192
71192
31753 (1969E-2)
71753
31754 (1973E-1)
71754
31755 (1991E-1)
71755
31756 (2001E-1)
71756
31757 (2003E-1)
71757
31758 (2004E-2)
71758
31761 (2004E-3)
71761
31759 (2004E-4)
71759
31760 (2004E-1)
71760
30952 (2000-7)
70952
31762 (2000-10)
71762
31763 (2000-22)
71763
31280 (2000-11)
71280
30723 (2000-12)
70723
30724 (2000-13)
70724
30725 (2000-6)
70725
31506
71506
30726 (2000-3)
70726
30727 (2000-14)
70727
30728 (2000-21)
70728
30729 (2000-0)
70729
30730 (2000-27)
70730
NA
71829
30698 (2000-15)
70698
30704 (2006E-3)
70704
30699 (2000-16)
70699
30700 (2006E-1)
70700
30701 (2000-29)
70701
30702 (2000-4)
70702
30703 (2000-35)
70703
31756+5 (2001E-1+.005) 71756+5
30690 (2000-36)
70690
30691 (2000-1)
70691
30692 (2000-17)
70692
30693 (2000-20)
70693
30694 (2000-18)
70694
(1937-17N)
(1937-52N)
(1937-52N)
(1937-6N)
(1937-19N)
(1937-20N)
(1937-52N)
(1937-1N)
(1937-53N)
(1937-52N)
(1937-31N)
(1952E-1N)
(1962E-1N)
(1969E-2N)
(1973E-1N)
(1991E-1N)
(2001E-1N)
(2003E-1N)
(2004E-2N)
(2004E-3N)
(2004E-4N)
(2004E-1N)
(2000-7N)
(2000-10N)
(2000-22N)
(2000-11N)
(2000-12N)
(2000-13N)
(2006E-6C)
(2000-3N)
(2000-14N)
(2000-21N)
(2000-0N)
(2000-27N)
(2006E-6C)
(2000-15N)
(2006E-3N)
(2000-16N)
(2006E-1N)
(2000-29N)
(2000-4N)
(2000-35N)
(2001E-1N+.005)
(2000-36N)
(2000-1N)
(2000-17N)
(2000-20N)
(2000-18N)
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
Cutter
OD
VALVE SEAT
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
VALVE SEAT
Cutter
OD
Actual
OD
ID
2"
2"
2"
2.0060
2.0060
2.0060
2.0079
2.0079
2.0080
2.0110
2.0110
2.0110
2.0130
2.0150
2.0160
2.0180
2.0276
2.0472
2.0485
2.0500
2.0508
2.0673
2.0680
2.0680
2.0680
2.0680
2.0680
2.0680
2.0685
2.0685
2.0866
2.0880
2.0902
2.0906
2.0906
2.1050
2.1098
2.1102
2.1102
2.1200
2.1290
2.1300
2.1300
2.1300
2.1300
2.1300
2.1300
2.1300
2.1305
2.1305
2.1305
2.1305
2.1305
2.1305
1.750
1.750
1.750
1.575
1.575
1.688
1.625
1.688
1.712
1.688
1.828
1.688
1.594
1.726
1.614
1.781
1.575
1.575
1.693
1.625
1.688
1.750
1.812
1.813
1.813
1.750
1.813
1.654
1.692
1.697
1.693
1.693
1.765
1.697
1.693
1.693
1.812
1.813
1.812
1.812
1.813
1.875
1.875
1.906
1.938
1.750
1.750
1.750
1.750
1.813
1.906
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
ID Top
Taper
1.875
1.895
Depth
Seat
Angle
.375
.438
.453
.217
.413
.282
.297
.282
.385
.282
.188
.282
.281
.217
.413
.344
.340
.364
.354
.281
.281
.281
.250
.188
.250
.219
.250
.413
.299
.382
.354
.394
.375
.402
.354
.394
.375
.437
.250
.375
.313
.219
.250
.234
.188
.219
.250
.281
.375
.188
.250
45°
45°
45°
45°
45°
30°
45°
45°
30°
30°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
320
Part Number Series
30000
70000
30695 (2000-19)
70695
30696 (2000-37)
70696
30697 (2000-28)
70697
31415
71415
31193 (2008E-2)
71193
31757+5 (2003E-1+.005) 71757+5
30726+5 (2000-3+.005)
70726+5
30700+5 (2006E-1+.005) 70700+5
31756+10 (2001E-1+.010) 71756+10
31757+10 (2003E-1+.010) 71757+10
31764 (2015E-1)
71764
30700+10 (2006E-1+.010) 70700+10
31765 (2018E-1)
71765
31341
71341
31194 (2047E-1)
71194
31766 (2049E-1)
71766
31297
71297
31816
71816
31401
71401
31767 (2062-7)
71767
31768 (2062-8)
71768
31769 (2062-2)
71769
30963 (2062-3)
70963
31770 (2062-30)
71770
30964 (2062-1)
70964
31249 (2062-25)
71249
31260 (2062-1)
71260
31195 (2087E-2)
71195
31771 (2088E-1)
71771
31475
71475
31430
71430
31424
71424
31310
71310
31093
71093
31447
71447
31441
71441
31454
71454
31772 (2129E-1)
71772
30557 (2125-1)
70557
31330 (2125-33)
71330
31124 (2125-32)
71124
30974 (2125-34)
70974
30537 (2125-2)
70537
31473
71473
31773 (2125-3)
71773
31777 (2125-11)
71777
31776 (2125-7)
71776
31774 (2125-10)
71774
31775 (2125-0)
71775
31779 (2125-38)
71779
31498 (2125-4)
71498
(2000-19N)
(2000-37N)
(2000-28N)
(2008E-2N)
(2003E-1N+.005)
(2000-3N+.005)
(2006E-1N+.005)
(2001E-1N+.010)
(2003E-1N+.010)
(2015E-1N)
(2006E-1N+.010)
(2018E-1N)
(2047E-1N)
(2049E-1N)
(2062-7N)
(2062-8N)
(2062-2N)
(2062-3N)
(2062-30N)
(2062-1N)
(2062-25N)
(2062-1N)
(2087E-2N)
(2088E-1N)
(2129E-1N)
(2125-1N)
(2125-33N)
(2125-32N)
(2125-34N)
(2125-2N)
(2125-3N)
(2125-11N)
(2125-7N)
(2125-10N)
(2125-0N)
(2125-38N)
(2125-4N)
Actual
OD
ID
2 1/8
2 1/8
2.1310
2.1310
2.1339
2.1339
2.1360
2.1370
2.1400
2.1500
2.1600
2.1654
2.1654
2.1700
2.1701
2.1925
2.1930
2.1930
2.1930
2.1935
2.1940
2.2200
2.2500
2.2550
2.2555
2.2555
2.2555
2.2560
2.2560
2.2900
2.3180
2.3180
2.3500
2.3657
2.3680
2.3730
2.3780
2.3800
2.3810
2.3810
2.3810
2.3810
2.3819
2.3820
2.3860
2.3860
2.3860
2.3860
2.3910
2.3910
2.3910
2.3910
2.4440
1.813
1.813
1.693
1.752
1.705
1.700
1.812
1.859
1.800
1.732
1.732
1.732
1.751
1.875
1.688
1.813
1.937
1.875
1.812
1.843
1.820
1.875
1.813
1.875
1.938
1.875
1.938
1.900
2.000
2.000
1.970
2.011
1.890
1.890
1.890
2.000
2.000
2.000
2.030
2.030
2.000
2.000
2.000
2.000
2.030
2.030
2.000
2.000
2.030
2.030
2.046
2
2
2
2
2
2
2
2
2
2
2
2
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
2 5/16
2 5/16
2
2
2
2
2
2
2
3/8
3/8
3/8
3/8
3/8
3/8
3/8
2 7/16
ID Top
Taper
Radius
Radius
Radius
Depth
Seat
Angle
.219
.437
.339
.287
.319
.400
.375
.292
.300
.433
.472
.433
.336
.250
.281
.281
.250
.281
.250
.312
.375
.375
.250
.313
.188
.281
.219
.375
.250
.281
.375
.350
.460
.460
.460
.188
.323
.323
.323
.323
.394
.281
.323
.323
.323
.323
.323
.323
.323
.323
.299
45°
30°
45°
45°
45°
45°
45°
30°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45° R
45°
45°
45°
45°
45°
45°
45° R
45°
45°
45° R
45°
20°
20°
20°
45°
30°
30°
30°
30°
45°
45°
30°
30°
30°
30°
30°
30°
30°
30°
45°
321
Part Number Series
30000
70000
31240 (2125-31)
71240
31780 (2131E-1)
71780
31338
71338
31417
71417
31781 (2136E-1)
71781
31504
71504
31830
71830
31782 (2150E-1)
71782
31271
71271
31783 (2165E-1)
71783
31141
71141
31783+5 (2165E-1+.005) 71783+5
31351
71351
31499 (2187-12)
71499
31784 (2187-13)
71784
31785 (2187-2)
71785
31282 (2187-27)
71282
30984 (2187-4)
70984
31135 (2187-1)
71135
31786 (2220E-1)
71786
31335
71335
31787 (2250-13)
71787
31788 (2250-8)
71788
31470 (2250-20)
71470
30989 (2250-1)
70989
31252 (2250-2)
71252
31261 (2250-35)
71261
31457
71457
30991 (2312-9)
70991
31790 (2312-4)
71790
31456
71456
31476
71476
31847 (2368E-2)
71847
31847+5 (2368E-2+.005) 71847+5
31847+10 (2368E-2+.010) 71847+10
31791 (2375-1)
71791
31844 (2381E-1)
71844
NA
91844
31845 (2381E-2)
71845
NA
91845
31815
71815
30994 (2375-2)
70994
31844+5 (2381E-1+.005) 71844+5
NA
91844+5
31845+5 (2381E-2+.005) 71845+5
NA
91845+5
31844+10 (2381E-1+.101) 71844+10
NA
91844+10
31845+10 (2381E-2+.010) 71845+10
NA
91845+10
31792 (2444E-1)
71792
(2125-31N)
(2131E-1N)
(2136E-1N)
(2150E-1N)
(2165E-1N)
(2165E-1N+.005)
(2187-12N)
(2187-13N)
(2187-2N)
(2187-27N)
(2187-4N)
(2187-1C)
(2220E-1N)
(2250-13N)
(2250-8N)
(2250-20N)
(2250-1N)
(2250-2N)
(2250-35N)
(2312-9N)
(2312-4N)
(2368E-2N)
(2368E-2N+.005)
(2368E-2N+.010)
(2375-1N)
(2381E-1N)
(2381E-1C)
(2381E-2N)
(2381E-2C)
(2375-2N)
(2381E-1N+.005)
(2381E-1C+.005)
(2381E-2N+.005)
(2381E-2C+.005)
(2381E-1N+.010)
(2381E-1C+.010)
(2381E-2N+.010)
(2381E-2C+.010)
(2444E-1N)
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
Cutter
OD
VALVE SEAT
VALVE SEAT
METRIC PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
DURA-BOND METRIC VALVE SEAT PROGRESSIVE LISTING BY OUTSIDE DIAMETER
Part Number
30000 70000
31357
31167
31446
31346
31002
31349
31398
31382
31405
31383
31915
31804
31168
31428
39006
31396
39007
31169
39008
31410
39009
31444
39011
31170
39010
31411
31436
39012
31051
39014
31171
39013
31448
31414
39015
31384
31409
39017
31172
31311
39016
31808
31347
39018
31914
31403
31800
31360
31006
31007
31425
39020
31136
31173
31348
39019
31819
31008
31123
39021
31293
31009
39023
71357
71167
71446
71346
71002
71349
71398
71382
71405
71383
71915
71804
71168
71428
79006
71396
79007
71169
79008
71410
79009
71444
79011
71170
79010
71411
71436
79012
71051
79014
71171
79013
71448
71414
79015
71384
71409
79017
71172
71311
79016
71808
71347
79018
71914
71403
71800
71360
71006
71007
71425
79020
71136
71173
71348
79019
71819
71008
71123
79021
71293
71009
79023
Actual
OD
ID
23.50
24.00
25.00
25.10
25.12
25.15
26.25
26.60
26.65
27.15
27.50
27.90
28.00
28.00
28.00
28.15
28.50
29.00
29.00
29.20
29.50
29.80
30.00
30.00
30.00
30.00
30.15
30.50
30.50
31.00
31.00
31.00
31.00
31.25
31.50
31.60
31.70
32.00
32.00
32.00
32.00
32.01
32.32
32.50
32.50
32.58
32.60
32.65
32.65
32.65
33.00
33.00
33.00
33.00
33.00
33.00
33.15
33.15
33.20
33.50
33.50
33.70
34.00
18.0
18.0
20.0
20.0
20.0
20.0
21.0
21.0
21.0
20.0
22.0
23.0
20.0
20.5
22.0
22.0
22.0
21.0
23.0
23.0
23.0
24.0
20.0
22.0
23.0
24.0
24.0
23.0
25.0
21.0
23.0
24.0
25.0
25.0
24.0
26.0
26.0
22.0
24.0
24.0
25.0
25.0
26.0
25.0
27.0
27.0
27.5
25.0
25.5
26.0
23.0
23.0
25.0
25.0
26.0
26.0
27.0
28.0
27.5
26.0
27.0
27.0
24.0
Seat
Depth Angle
6.0
6.5
7.0
6.0
6.0
6.0
4.5
6.0
5.5
6.0
6.0
6.5
8.0
6.5
10.0
6.5
10.0
8.5
10.0
6.5
10.0
6.0
10.0
8.5
10.0
8.5
9.0
10.0
6.5
10.0
8.5
10.0
6.0
8.0
10.0
6.0
6.5
10.0
8.5
9.0
10.0
8.0
6.0
10.0
5.5
6.0
9.0
6.0
8.0
8.5
8.0
10.0
4.5
8.5
6.5
10.0
8.0
7.0
7.0
10.0
9.0
8.0
10.0
Part Number
30000 70000
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
31174
31273
31306
31385
31449
31060
31356
39024
31035
31809
39026
31175
31408
31824
39025
31065
39027
31274
31294
31012
31277
31443
39029
31176
39028
31121
31420
39030
31439
31440
31068
31069
39031
31275
31908
31070
31365
39033
31071
31386
31014
31818
31015
31387
39035
31178
31038
31276
31823
31073
31419
31388
39036
31389
31016
39038
31369
31179
31180
39037
31370
31075
39039
322
71174
71273
71306
71385
71449
71060
71356
79024
71035
71809
79026
71175
71408
71824
79025
71065
79027
71274
71294
71012
71277
71443
79029
71176
79028
71121
71420
79030
71439
71440
71068
71069
79031
71275
71908
71070
71365
79033
71071
71386
71014
71818
71015
71387
79035
71178
71038
71276
71823
71073
71419
71388
79036
71389
71016
79038
71369
71179
71180
79037
71370
71075
79039
Actual
OD
ID
34.00
34.00
34.00
34.10
34.15
34.25
34.30
34.50
34.63
34.80
35.00
35.00
35.00
35.00
35.00
35.25
35.50
35.50
35.50
35.60
35.60
35.70
36.00
36.00
36.00
36.20
36.25
36.50
36.70
36.70
37.00
37.00
37.00
37.00
37.16
37.20
37.30
37.50
37.50
37.50
37.65
37.65
37.70
37.75
38.00
38.00
38.00
38.00
38.00
38.23
38.25
38.50
38.50
38.75
38.95
39.00
39.00
39.00
39.00
39.00
39.00
39.30
39.50
26.0
27.0
28.0
27.5
28.0
27.0
27.0
27.0
25.0
29.0
25.0
26.0
28.0
28.0
28.0
28.0
28.0
29.0
29.5
29.0
29.0
30.0
26.0
27.0
29.0
31.0
29.0
29.0
29.0
31.0
28.0
30.0
30.0
31.0
31.0
30.0
29.0
30.0
31.0
31.5
31.0
31.5
31.0
31.0
28.0
29.0
30.0
31.0
32.0
31.0
32.5
31.0
31.0
31.0
31.0
29.0
30.0
30.0
31.0
32.0
33.0
32.0
32.0
Seat
Depth Angle
8.5
10.0
4.5
6.0
6.0
8.0
8.0
10.0
10.0
6.5
10.0
9.0
5.0
8.5
10.0
8.0
10.0
10.0
9.5
8.0
9.5
9.0
10.0
9.0
10.0
7.5
8.0
10.0
8.0
7.5
9.0
8.0
10.0
10.0
9.0
7.0
8.0
10.0
8.5
8.5
7.0
8.0
8.0
8.5
10.0
9.0
7.0
10.0
8.5
8.0
7.5
8.5
10.0
8.5
8.5
10.0
7.0
9.0
8.5
10.0
8.0
8.0
10.0
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
31076
71076
31295
71295
31442
71442
31802
71802
39041
79041
31181
71181
39040
79040
31296
71296
31278
71278
31017
71017
39042
79042
31018
71018
39044
79044
31182
71182
39043
79043
31039
71039
31813
71813
31685
71685
31323
71323
39045
79045
31019
71019
39047
79047
31183
71183
31184
71184
39046
79046
31082
71082
31810
71810
31421
71421
31308
71308
39048
79048
31373
71373
31811
71811
39050
79050
31186
71186
39049
79049
31391
71391
31021
71021
39051
79051
39070
79070
31814
71814
39053
79053
31187
71187
31375
71375
39052
79052
31110
71110
31086
71086
39056
79056
39071
79071
39055
79055
31381
71381
31392
71392
39058
79058
31227
71227
31393
71393
39057
79057
31227+5 71227+5
31404
71404
31472
71472
31801
71801
39059
79059
39061
79061
31188
71188
39060
79060
Actual
OD
ID
39.50
39.60
39.70
39.75
40.00
40.00
40.00
40.00
40.20
40.20
40.50
40.60
41.00
41.00
41.00
41.00
41.15
41.40
41.50
41.50
41.62
42.00
42.00
42.00
42.00
42.20
42.20
42.25
42.40
42.50
42.60
42.70
43.00
43.00
43.00
43.00
43.25
43.50
43.50
43.70
44.00
44.00
44.00
44.00
44.03
44.25
44.50
44.50
44.50
44.60
44.75
45.00
45.00
45.00
45.00
45.14
45.25
45.25
45.50
45.50
46.00
46.00
46.00
33.0
33.5
33.0
33.0
29.0
30.0
32.0
33.5
33.5
34.0
32.0
34.0
30.0
31.0
33.0
34.0
35.5
32.5
32.0
33.0
34.0
31.0
32.0
33.0
34.0
33.5
35.5
35.0
34.0
34.0
36.0
35.5
32.0
33.0
35.0
35.2
36.0
35.0
36.0
37.0
33.0
34.0
36.0
36.0
34.0
37.0
30.0
36.0
36.0
35.0
37.0
34.0
34.5
37.0
37.0
34.5
38.0
39.0
36.6
37.0
34.0
35.5
38.0
Seat
Depth Angle
8.5
9.5
9.0
8.5
10.0
9.5
10.0
9.0
9.5
7.5
10.0
7.0
10.0
8.5
10.0
7.5
6.5
8.0
10.0
10.0
8.0
10.0
9.5
8.5
10.0
10.5
8.0
8.0
4.5
10.0
8.0
8.5
10.0
8.5
10.0
8.0
8.0
10.0
10.0
8.5
10.0
9.5
7.0
10.0
9.5
8.0
10.0
10.0
11.0
7.5
8.5
12.0
10.0
8.5
12.0
10.0
8.0
7.5
9.5
12.0
12.0
10.0
12.0
Part Number
30000 70000
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
31307
71307
39062
79062
39065
79065
31228
71228
39063
79063
31228+5 71228+5
31377
71377
39066
79066
31394
71394
39069
79069
31189
71189
39068
79068
39067
79067
31913
71913
31190
71190
31191
71191
31192
71192
31753
71753
31415
71415
31193
71193
31194
71194
31401
71401
31195
71195
31430
71430
31424
71424
31447
71447
31441
71441
31783
71783
31141
71141
31783+5 71783+5
Actual
OD
ID
46.20
46.50
47.00
47.00
47.00
47.13
47.40
47.50
47.80
48.00
48.00
48.00
48.00
48.05
49.00
49.00
50.00
50.01
51.00
51.00
52.00
52.51
53.00
53.10
53.10
53.60
53.60
55.00
55.00
55.12
38.0
38.0
36.0
36.5
39.0
36.5
39.0
39.0
40.0
37.0
37.5
38.0
40.0
40.0
38.5
42.0
39.0
39.0
40.0
40.0
41.0
43.0
42.0
43.0
43.0
43.0
43.0
44.0
44.0
44.0
Seat
Depth Angle
4.0
12.0
12.0
10.0
12.0
10.0
8.0
12.0
8.0
12.0
10.0
11.0
12.0
8.0
10.0
8.0
10.0
10.5
5.5
10.5
10.5
9.0
10.5
9.0
10.0
9.0
10.0
11.0
12.0
11.0
CONVERSION FORMULA
INCHES X 25.4 = MM
MM ÷ 25.4 = INCHES
323
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
VALVE SEAT
Part Number
30000 70000
METRIC PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
DURA-BOND METRIC VALVE SEAT PROGRESSIVE LISTING BY OUTSIDE DIAMETER
Dura-Bond
SHIMS
Available in both case hardened High Performance and regular series
All Dura-Bond shims meet or exceed OEM specifications.
Only prime quality cold rolled steel is used.
3060-C
6060-C
.030”
.060”
Allis Chalmers, Chrysler, General Motors,
International Tractor, John Deere,
Mazda, Mercury Marine
STANDARD REBUILDERS PACK: 500 Pieces per Box • Cupped, Industrial, or HP • 250 Pieces per Box
STANDARD PACKAGE: 100 Pieces per Box • Cupped, Industrial, or HP • 50 Pieces per Box
DESIGN FEATURES
Both sides are flat and without serrations or marks of any kind.
• All OEM specifications call for non-serrated shims.
• Non-serrated shims do not damage the spring pad area on today’s aluminum cylinder heads.
• Non-serrated shims lay flat so as not to set up any harmonics in the spring.
• Non-serrated shims lay flat so as not to introduce any lateral loads on the spring, valve or guide.
APPLICATION
Cyl
YEAR
DURA-BOND PART #
.015"
.030"
.060"
B, B125, C, CA, D10, D12, D14, D15, D17,
1080
3080
6080
G138, G149, G226, H3, 1B, RC, W, WC, WD
(C302)
(B302)
(A302)
WD45, WF, W25, W201, W226, 60H, 66, 72, 90
6 cyl
4 cyl
"
"
D-2800, 2900, 180, 190, 190XT, TL545
G, N62, N4062 Series Eng.
M, U, U40, UC, UM42, 42, W, WC, WF, W25, W201
HD6, 11, 344, 516, TDS516, TS160, D151D, D17D,
1060 or C
3060 or C
6060 or C
(C203 or C505)
(B203 or B505)
(A203 or A505)
1010
3010
6010
(C202)
(B202)
(A202)
---
3180-I
6180-I
---
D153, DA153, D230, G230, 230, HD3, A, AH, AC,
(B401)
(A401)
3045-I
6045-I
(B407)
(A407)
B, D, DC, FC, GC, HD16A, HD21A, F, G, HD844
HDT844, R, WD45D, 16000, 21000
AMERICAN MOTORS/EAGLE/JEEP/RENAULT
4 cyl
"
6 cyl
"
"
"
"
"
"
"
"
6, 8 cyl
8 cyl
"
"
1977-88 121, 151ci, 2.5L
1939-62 134ci
1984-86 173ci
1980-90 V6, 173ci/2.8L
1958-65 196ci L HEAD
1956-65 196ci OHV
1964-66 199, 232ci
1966-77 199, 232, 258ci
1967-85 199, 232., 258ci
1966-72 225ci
1954-65 226ci
1957-66 250, 287, 327ci
1966-91 290, 304, 343, 360, 390 (exc. 1970)
1970-78 350ci (early)
1970-78 390, 401ci
Most of the shims shown in this catalog are available in case hardened ("hp") series.
Use the same part number - just add "hp" to the end.
325
1070
3070
6070
(C201)
(B201)
(A201)
1060
3060
6060
(C203)
(B203)
(A203)
1060
3060
6060
(C203)
(B203)
(A203)
1060
3060
6060
(C203)
(B203)
(A203)
1020
3020
6020
(C101)
(B101)
(A101)
1040
3040
6040
(C300)
(B300)
(A300)
1080
3080
6080
(C302)
(B302)
(A302)
1110
3110 or C
6110 or C
(C102)
(B102 or B502)
(A102 or A502)
1160
3160 or C
6160 or C
(C103)
(B103 or B503)
(A103 or A503)
1070
3070
6070
(C201)
(B201)
(A201)
1040
3040
6040
(C300)
(B300)
(A300)
1080
3080
6080
(C302)
(B302)
(A302)
1110
3110 or C
6110 or C
(C102)
(B102 or B502)
(A102 or A502)
1070
3070
6070
(C201)
(B201)
(A201)
1160
3160 or C
6160 or C
(C103)
(B103 or B503)
(A103 or A503)
SHIMS
4 cyl
ALLIS CHALMERS
APPLICATION
SHIMS
Cyl
YEAR
DURA-BOND PART #
.015"
.030"
.060"
AUSTIN HEALY
4 cyl
"
"
"
6 cyl
Austin A-55
1961-69 A60, 1622cc
1961-70 Cooper 848, 998, 1098, 1275cc
1958-75 Sprite MK I, II, III, IV
1956-68 3000 MK I, II, III
1110
3100
6100
(C200)
(B200)
(A200)
1100
3100
6100
(C200)
(B200)
(A200)
1030
3030
6030
(C106)
(B106)
(A106)
1030
3030
6030
(C106)
(B106)
(A106)
1080
3080
6080
(C302)
(B302)
(A302)
AUDI
4 cyl
"
1973-74 1471cc
1975-80 1588cc
1030
3030
6030
(C106)
(B106)
(A106)
1055
3055
6055
(C107)
(B107)
(A107)
BMW
4 cyl
2002
1055
3055
6055
(C107)
(B107)
(A107)
---
3045-I
6045-I
(B407)
(A407)
BUDA
4, 6 cyl
4B153, 6B230, 4B182, 6B273, H217, H326, K428,
L525, LO525
CASE
6 cyl
4 cyl
209
1040
3040
6040
(C300)
(B300)
(A300)
300B, 400, 400B, 430, 440, 441, 500, 500B, 530,
1080
3080
6080
600, 600B, 630, 640, 700B, 800B, 730, 740, 930, 940,
(C302)
(B302)
(A302)
1030, 1200, VA Series
"
"
"
"
---
C & D Series
F-124
R Series, C, CB, K Combines
S Series, SP9
326
3170
6170
(B304)
(A304)
1020
3020
6020
(C101)
(B101)
(A101)
1050
3050
6050
(C105)
(B105)
(A105)
1030
3030
6030
(C106)
(B106)
(A106)
APPLICATION
Cyl
YEAR
DURA-BOND PART #
.060"
---
3045-I
6045-I
(B407)
(A407)
CATERPILLAR
4 cyl
D2, 4, 6, DW10, 12, 14B, 112, 212, D311, 315, 318,
INNER
955C, 955E, 977D, 977E, D3400, 4400, 4600
OUTER
6 cyl
D7, 8, 8800, 13000, 17000
INNER
OUTER
6, 8, 12 cyl
MD D-7, 831 (D3309), 1246 (D-8), 1473 (G535),
---
571, 577, C, D, E, 583C, E, H, D339, 342C, 353C, D,
6170
(B304)
(A304)
1050
3050
6050
(C105)
(B105)
(A105)
---
3220-I
6220-I
(B406)
(A406)
---
3190-I
---
3190-I
6190-I
(B402)
(A402)
(B402)
1662 (D364), 1662 (D375), 1964 (D379), All V-12
"
3170
G, D364, 375, D, D379, 386, 397, D, D398, D399,
1300
4 cyl
"
6 cyl
8 cyl
"
D4C, D, 6B, 12E, 112E, F; 516B, 944A, 955H, K;
1080
3080
6080
966A, B; 997K, D330, A, B; D333, A; D1673, B
(C302)
(B302)
(A302)
1670
1673
3208
1693
1065
3065
6065
(C107S)
(B107S)
(A107S)
1110
3110 or C
6110 or C
(C102)
(B102 or B502)
(A102 or A502)
1156-I
3156-I
6156-I
(C404)
(B404)
(A404)
---
3153 or C
6153 or C
(B306S or B506) (A306S or A506)
(Use Dimensional Listing in back if not shown)
CHRYSLER CORP. (CHRYSLER, DODGE, DODGE TRUCK,
EAGLE, GM, MITSUBISHI, AND PLYMOUTH) ALSO SEE AMC
4 cyl
1973-83 105ci ,1715cc/1.7L (Volkswagen)
"
1981-94 2213cc
"
1984-90 SOHC 8 VALVE 135ci, 2.2L
"
"
6 cyl
"
"
"
1980-84 151ci (GM)
1981-89 156ci, 2555cc (G54B Mitsubishi)
1960-90 170, 198, 199, 225, 232 (AMC), 258ci (AMC)
1984-86 173ci
1954-65 226ci (AMC), 230ci (Chrysler)
1965-71 255ci (GM)
327
1055
3055
6055
(C107)
(B107)
(A107)
1125
3125
6125
1160
3160
6160
(C103)
(B103 )
(A103)
1070
3070
6070
(C201)
(B201)
(A201)
1085
3085
6085
1160
3160 or C
6160 or C
(C103)
(B103 or B503)
(A103 or A503)
1060
3060 or C
6060 or C
(C203)
(B203 or B505)
(A203 or A505)
1040
3040
6040
(C300)
(B300)
(A300)
1070
3070
6070
(C201)
(B201)
(A201)
SHIMS
.030"
.015"
APPLICATION
SHIMS
Cyl
YEAR
DURA-BOND PART #
.015"
.030"
.060"
8 cyl
1964-91 273, 290 (AMC), 304 (AMC), 343 (AMC), 360,
413ci (some)
"
"
1963-66 287ci (AMC)
1957-00 318, 326, 340, 361, 383, 390 (AMC), 400, 401 (AMC),
413 (some), 440ci
"
"
1959-70 327ci (AMC)
1968-71 350ci (AMC)
1110
3110 or C
6110 or C
(C102)
(B102 or B502)
(A102 or A502)
1080
3080
6080
(C302)
(B302)
(A302)
1110
3110 or C
6110 or C
(C102)
(B102 or B502)
(A102 or A502)
1080
3080
6080
(C302)
(B302)
(A302)
1070
3070
6070
(C201)
(B201)
(A201)
3153 or C
6153 or C
1153
Re-machined pad area
(C306S)
"
426ci Hemi Wedge
INNER
OUTER
"
1966-80 440ci
(B306S or B506) (A306S or A506)
1010
3010
6010
(C202)
(B202)
(A202)
1160
3160 or C
6160 or C
(C103)
(B103 or B503)
(A103 or A503)
1160
3160 or C
6160 or C
(C103)
(B103 or B503)
(A103 or A503)
CONTINENTAL
4 cyl
4, 6 cyl
N-62, N-4062
1010
3010
6010
(C202)
(B202)
(A202)
C4113, F124, 140, 162, 4124, 4140, 4162, LF124,
1040
3040
6040
140, 162, PF124, 140, 162, LY69, PY69, Y69,
(C300)
(B300)
(A300)
PY91-112, 4091, 4112, Z120, 129, 134, D202-6184,
DS202-6202, PD202, D6170, DS6170, F-170, 186,
209, 226
"
6170, 6186, 6209, 6226, ED201, 208, 223, 242,
1080
3080
6080
LD208, PF-170, 209, 226, 248, H260-277, HD260-
(C302)
(B302)
(A302)
277, J382-382A, JD382
CUMMINS
4, 6, 8 cyl
"
NH200
NH, 220, 220B, NHE180, 195, NHH220, B, NHRS,
1040
3040
6040
(C300)
(B300)
(A300)
---
3045-I
6045-I
(B407)
(A407)
NHS, NRT, NRTO, NT6, NT06, 262, 280, NVH450,
VT600, NHBS, NRTM
"
NH230, 250, C250, CT270, E225, NT280, 310, 335, 380
1070
3070
6070
A380, C280, C320, C335, E300, V525, 171O, 12-225,
(C201)
(B201)
(A201)
12-700, VT700, 1710
"
"
NH230B, 250B, C, P, NHC250, NT, NTA, NTC, V, VT
H Series
REG. GUIDE
PLANTED GUIDE
"
J Series, C90, C140, C160, C175, C180, C190B, CS464
328
1080
3080
6080
(C302)
(B302)
(A302)
---
3200-I
6200-I
---
(B400)
(A400)
3220-I
6220-I
(B406)
(A406)
1020
3020
6020
(C101)
(B101)
(A101)
APPLICATION
Cyl
YEAR
DURA-BOND PART #
.015"
.030"
.060"
DETROIT DIESEL
2, 3, 4, 6 cyl
53, V-53 Series
2 VALVE
4 VALVE
2 - 16 cyl
71, V-71 Series
2 VALVE
4 VALVE
2 - 8 cyl
110 Series
2 VALVE
1010
3010
6010
(C202)
(B202)
(A202)
1005
3005
6005
(C204)
(B204)
(A204)
1043
3043
6043
(C408)
(B408)
(A408)
1010
3010
6010
(C202)
(B202)
(A202)
1050
3050
6050
(C105)
(B105)
(A105)
DODGE (SEE CHRYLSER)
FIAT
4 cyl
1953-84 1116, 1200, 1290, 1438, 1498, 1592, 1608, 1756,
INNER
2100, 2300cc
OUTER
"
"
"
1964-73 817, 843, 903cc
1960-67 600D
1974-80 124, 131 Models
1005
3005
6005
(C204)
(B204)
(A204)
1050
3050
6050
(C105)
(B105)
(A105)
1030
3030
6030
(C106)
(B106)
(A106)
1020
3020
6020
(C101)
(B101)
(A101)
1150
3150
6150
(C303)
(B303)
(A303)
FORD (PASSENGER, TRUCK, & INDUSTRIAL)
4 cyl
1971-80 98ci, 1599cc Pinto; 110ci, 1796cc (Mazda)
"
1981-85 Escort 1600, 1900cc
"
1985-90 116ci, 1900cc, 1.9L
"
"
6 cyl
1971-77 122ci, 2000cc Pinto
1974-93 140ci, 2300ci, SOHC
1958-00 144, 170, 171, 200, 220, 223, 240, 250, 262ci, 2600,
2800cc, 3.0L, 3.8L
4 cyl
6 cyl
8 cyl
1985-96 153ci, 2.5L - H.S.C.
1965-97 232 , 300ci Light and Heavy Duty
1962-00 221, 255, 260, 272, 289, 292, 302, 312ci
329
1040
3040
6040
(C300)
(B300)
(A300)
1095
3095
6095
1160
3160 or C
6160 or C
(C103)
(B103 or B503)
(A103 or A503)
1050
3050
6050
(C105)
(B105)
(A105)
1110
3110 or C
6110 or C
(C102)
(B102 or B502)
(A102 or A205)
1110
3110 or C
6110 or C
(C102)
(B102 or B502)
(A102 or A502)
1160
3160 or C
6160 or C
(C103)
(B103 or B503)
(A103 or A503)
1160
3160 or C
6160 or C
(C103)
(B103 or B503)
(A103 or A503)
1110
3110 or C
6110 or C
(C102)
(B102 or B502)
(A102 or A502)
SHIMS
DATSUN (SEE NISSAN)
APPLICATION
SHIMS
Cyl
YEAR
DURA-BOND PART #
.015"
.030"
.060"
FORD (CONT'D)
8 cyl
1958-00 330, 332, 351, 351C, 351M, 351W, 352, 359, 360,
361, 370, 389ci
"
"
1958-83 390, 391, 400, 401, 406, 410, 427, 429, 462,
475, 477, 534ci
"
383ci, 430ci
1962
3160 or C
6160 or C
(B103 or B503)
(A103 or A503)
---
330HD, 361, 391ci ROTO-CAP
"
1160
(C103)
1160
3160 or C
6160 or C
(B103 or B503)
(A103 or A503)
---
3130-I
6130-I
(C306S)
"
1153
1966-70 428ci
(C306S)
1153
Remachined Pad Area
(C306S)
"
1973-97 460 ci
6145
(A109)
(C103)
1153
406ci
3145
(B109)
(B403)
(A403)
3153 or C
6153 or C
(B306S or B506) (A306S or A506)
3153 or C
6153 or C
(B306S or B506) (A306S or A506)
3153 or C
6153 or C
(B306S or B506) (A306S or A506)
1135
3135
6135
(C306)
(B306)
(A306)
FORD BRITISH
4 & 6 cyl
4 cyl
"
1955-66 Anglia, Consul 993cc
1960-69 Anglia, Consul 1198cc, Capri, Corsair, Cortina
1968-70 Cortina 1300, 1600
1010
3010
6010
(C202)
(B202)
(A202)
1040
3040
6040
(C300)
(B300)
(A300)
1080
3080
6080
(C302)
(B302)
(A302)
FORD GERMAN
4 cyl
1956-65 1000, 1200, 1500cc
1070
3070
6070
(C201)
(B201)
(A201)
FORD TRACTOR
4 cyl
"
6 cyl
2N, 8N, 9N
NAA Series, E Series
262
1020
3020
6020
(C101)
(B101)
(A101)
1120
3120
6120
(C301)
(B301)
(A301)
1110
3110 or C
6110 or C
(C102)
(B102 or B502)
(A102 or A502)
GENERAL MOTORS (PASSENGER CARS AND TRUCKS)
4 cyl
"
"
"
1976-87 85ci, 1398cc; 98ci, 1599cc
1990-97 Geo 1.6L, 1.8L
1972-82 110ci, 1817cc (Isuzu gas)
1962-86 140ci, 1.8L; 153ci, 2.0L Chevrolet
330
1080
3080
6080
(C302)
(B302)
(A302)
---
3045-I
6045-I
(B407)
(A407)
1030
3030
6030
(C106)
(B106)
(A106)
1060
3060 or C
6060 or C
(C203 )
(B203 or B505)
(A203 or A505)
APPLICATION
Cyl
YEAR
DURA-BOND PART #
.015"
.030"
.060"
"
4 cyl
6 cyl
140 Cosworth
1960-63 140 Corvair, 145ci Chevrolet
1977-93 151ci, 2.5L Buick, Chevrolet, Olds, Pontiac
1954-93 164, 173, 181, 189, 194, 200, 228, 229, 230, 231,
236, 248, 250, 262, 270, 292ci, 2.8L, 3.1L, 3.4L
1055
3055
6055
(C107)
(B107)
(A107)
1030
3030
6030
(C106)
(B106)
(A106)
1070
3070
6070
(C201)
(B201)
(A201)
1060
3060 or C
6060or C
(C203 )
(B203 or B505)
(A203 or A505)
Buick, Cadillac, Chevrolet, Olds, Pontiac Car & Truck
"
1964-95 173, 196, 198, 204, 225, 231, 250, 252ci, 3.3L
Buick, Cad, Chevrolet, Olds, Pontiac Car & Truck
4 cyl
6 cyl
8 cyl
1961-65 195ci Pontiac
1964-65 215ci Buick, Olds, Pontiac
1965-76 215 (Aluminum), 248, 263, 264, 300 (Buick), 320, 322,
INNER
340 (Buick), 364, 400 (Buick), 401, 403, 425 (Buick),
430, 455ci (Buick)
OUTER
Buick, Cad, Chevrolet, Olds, Pontiac Car
"
1964-90 215 (except Aluminum), 260, 304, 305 (Oldsmobile),
307 (Oldsmobile), 324 (Oldsmobile), 330,
1070
3070
6070
(C201)
(B201)
(A201)
1120
3120
6120
(C301)
(B301)
(A301)
1050
3050
6050
(C105)
(B105)
(A105)
1010
3010
6010
(C202)
(B202)
(A202)
1090
3090
6090
(C100)
(B100)
(A100)
1150
3150
6150
(C303)
(B303)
(A303)
350 (Oldsmobile), 371, 394, 396, 400 (Oldsmobile),
400 (Big Block), 402, 403, 425 (Oldsmobile), 427,
454, 455ci (Oldsmobile). Buick, Cad, Chevrolet, Olds,
Pontiac Pass. Car
6 cyl
8 cyl
6 cyl
1937-62 216, 235ci Chevrolet, GMC Car & Truck
1982-88 252ci Cadillac
1982-85 260ci Olds Diesel Eng.
"
8 cyl
1954-61 261ci Chevrolet Truck
1957-01 262, 265 (Chev, Olds, Pontiac), 267, 283, 292, 301,
305, 307 (Chevrolet, GMC), 327, 350 (late), 368, 390,
1100
3100
6100
(C200)
(B200)
(A200)
1070
3070
6070
(C201)
(B201)
(A201)
1160
3160 or C
6160 or C
(C103)
(B103 or B503)
(A103 or A503)
1090
3090
6090
(C100)
(B100)
(A100)
1060
3060 or C
6060 or C
(C203 )
(B203 or B505)
(A203 or A505)
400 (Chevrolet Small Block), 425 & 429 (Cadillac),
454 (Lt. Duty), 472, 500ci
"
1955-76 265 (Chevrolet), 300, 340, 350 (early), 500ci (Cadillac)
"
1955-73 288, 307 (GMC), 316, 317, 324, 326, 336, 347, 370,
389, 400 (Pontiac), 421, 428ci (Pontiac)
1070
3070
6070
(C201)
(B201)
(A201)
1120
3120
6120
(C301)
(B301)
(A301)
---
3130-I
6130-I
6 cyl
1939-75 V305, 308, V351, 361, V401, 426, 451, 477, V478ci
8 cyl
---
1960-75 305 (GMC), 379, 401, 478ci
"
1958-61 348, 409ci (Chevrolet & GMC Truck)
331
(B403)
(A403)
3130-I
6130-I
(B403)
(A403)
1100
3100
6100
(C200)
(B200)
(A200)
SHIMS
6 cyl
APPLICATION
SHIMS
Cyl
YEAR
DURA-BOND PART #
.015"
.030"
.060"
8 cyl
"
"
1961-65 409ci Chevrolet Car & Truck
1160
3160 or C
6160 or C
(C103)
(B103 or B503)
(A103 or A503)
1150
3150
6150
(C303)
(B303)
(A303)
1968-94 D351, 366(Truck), 396, 402, 427 (Truck), 454(HD),
1156-I
3156-I
6156-I
(C404)
(B404)
(A404)
1965-85 350N Diesel, 396, 400, 402, 427, 454ci (LD)
478(GMC), 637ci
"
6 cyl
1967-69 428, 455 (Pontiac)
3140
6140
(B305)
(A305)
3220-I
6220-I
(B406-I)
(A406-I)
---
1973-74 432ci V-6 MD-HD Chevrolet-GMC Truck
2 - 12 cyl
1140
(C305)
1043
3043
6043
MD-HD Chevrolet-GMC Truck
(C408)
(B408)
(A408)
HARLEY-DAVIDSON
2 cyl
74 Series & Sportster, BSA, Honda, Triumph Motorcyle
1003
3003
6003
(C204S)
(B204S)
(A304S)
HERCULES
4 - 6 cyl
DJ, DI, DO Series
INNER
OUTER
3, 4, 6 cyl
GO, DD
INNER
OUTER
4 - 6 cyl
"
"
IX, NX, QX, QXB, QXC, QXD, QXLD
JX, OO, JX4E, OOA, JXAZ, JXE, OOB, JXB, JXC, JXG
RX, WX, YX
1010
3010
6010
(C202)
(B202)
(A202)
1070
3070
6070
(C201)
(B201)
(A201)
1010
3010
6010
(C202)
(B202)
(A202)
1110
3110
6110
(C102)
(B102)
(A102)
1010
3010
6010
(C202)
(B202)
(A202)
1030
3030
6030
(C106)
(B106)
(A106)
1060
3060
6060
(C203)
(B203)
(A203)
HONDA
1040
3040
6040
(C300)
(B300)
(A300)
1973-80 1169, 1237, 1488cc
1052
3052
6052
"
1974-83 1237cc EB2, EB3
1022
3022
6022
"
1973-88 1488, 1591, 1597, (EF1), 1599, 1751, 1830cc
2, 4 cyl
4 cyl
1968-73 354, 600cc
1055
3055
6055
(C107)
(B107)
(A107)
HONDA MOTORCYCLE
2 cyl
Honda Motorcyles
332
1003
3003
6003
(C204S)
(B204S)
(A304S)
APPLICATION
Cyl
YEAR
DURA-BOND PART #
.060"
---
3130-I
6130-I
(B403)
(A403)
INTERNATIONAL - NAVISTAR TRUCK
4 cyl
6 cyl
8 cyl
6 cyl
"
"
8 cyl
"
"
"
B-152 Scout 80, 196
220 (BD220-SD220), 240 (BD240-SD240),
1080
3080
6080
241(BD241-BG241), 264(BD264), 265, 301 Diesel
(C302)
(B302)
(A302)
---
3130-I
6130-I
(B403)
(A403)
V226, V304, V345, V392, 400, 446(MV), V462, V550
232 (AMC)
250, 269
282(BD282), 308
Red 318, 361, 372, 401(VS401), 406, 450, 450(RD), 501
401(IHC-Nav), V401ci
1983-97 420, 445ci, 7.3L
1960-79 461, 478, 548, 549ci
1160
3160 or C
6160 or C
(C103)
(B103 or B503)
(A103 or A503)
1070
3070
6070
(C201)
(B201)
(A201)
---
3130-I
6130-I
(B403)
(A403)
1150
3150
6150
(C303)
(B303)
(A303)
---
3200-I
6200-I
(B400)
(A400)
1100
3100
6100
(C200)
(B200)
(A200)
---
3200-I
6200-I
(B400)
(A400)
INTERNATIONAL TRACTOR
4 cyl
4, 6 cyl
4, 6, 8 cyl
60
113, 123, 135, 146, 152, 153, 164, 166, 175, 221
1010
3010
6010
(C202)
(B202)
(A202)
1030
3030
6030
(C106)
(B106)
(A106)
3130-I
6130-I
(B403)
(A403)
152, 196, 248, C248, D248, V261, 264 Gas & LPG,
---
281, BD282, 304, 308, 345, 392, 400,
404, 446, DV462, 550, DVT573
4, 6 cyl
6 cyl
"
8 cyl
157, D188, C221, 236, D236 Diesel, 262, 263,
1060
3060 or C
6060 or C
D263 Diesel, 282, D282 Diesel, 291, 301
(C203 )
(B203 or B505)
(A203 or A505)
232
361(D361-DT361 Turbo), D407(D407-D407 Turbo)
V401, 461, 478, 549
1160
3160 or C
6160 or C
(C103)
(B103 or B503)
(A103 or A503)
1156-I
3156-I
6156-I
(C404)
(B404)
(A404)
---
3200-I
6200-I
(B400)
(A400)
INTERNATIONAL CUB
4, 6 cyl
6, 8 cyl
1030
3030
6030
(C106)
(B106)
(A106)
C335, 350, D335, 350, 361, 370, 407, 461, 525, D554,
1156-I
3156-I
6156-I
691, DT361, 407
(C404)
(B404)
(A404)
C113, 123, 152, 164, 169, 175, 221
ISUZU
4 cyl
1976-82 Model 110
333
1100
3100
6100
(C200)
(B200)
(A200)
SHIMS
.030"
.015"
APPLICATION
SHIMS
Cyl
YEAR
DURA-BOND PART #
.015"
.030"
.060"
JAGUAR
6 - 12 cyl
1950-81 Most Models
1055
3055
6055
(C107)
(B107)
(A107)
---
3210-I
6210-I
(B405)
(A405)
JEEP ( SEE WILLYS)
JOHN DEERE
2, 4, 6 cyl
"
"
"
R Diesel, 70, 80, 720, 730, 820, 830, 840
B Series
520, 530, 60, 45, 55, 95, 99 H Series, 1010, 2010
1110
3110
6110
(C102)
(B102)
(A102)
1040
3040
6040
(C300)
(B300)
(A300)
M, 40, 201, 227, 301, 320, 330, 340, 341, 420, 440,
1060
3060 or C
6060 or C
620, 630, 720, 730, JD500, 600, 3010, 3020, 4010,
(C203 )
(B203 or B505)
(A203 or A505)
---
3130-I
6130-I
(B403)
(A403)
4020 Gas
"
135 Gas, 180, 202, 270, Diesel JD350, 404, 450,
500, 600, 760A, 1010, 1020, 2010, 2020, 2510,
2520, 3010, 3020, 4010, 4020, 4270, 5010
"
8010
1010
3010
6010
(C202)
(B202)
(A202)
LE ROI
4 cyl
D176, 201, 226
NARROW KEEPER GROOVES
WIDE KEEPER GROOVES
1080
3080
6080
(C302)
(B302)
(A302)
---
3180-I
6180-I
(B401)
(A401)
LINCOLN (SEE FORD)
MACK
6 cyl
"
EN253, 271, 291, 331, 354, 354A, 377, 401, 402, 431A
EN438, 464, 465, 475, 510, 540, 672
INNER
OUTER
6, 8 cyl
END673, ENDT673, 676, 707, 711, 864, 866
1060
3060
6060
(C203)
(B203)
(A203)
1040
3040
6040
(C300)
(B300)
(A300)
---
3190-I
6190-I
---
(B402)
(A402)
3180-I
6180-I
(B401)
(A401)
MAZDA
4 cyl
"
"
1976-86 1272, 1415, 1490, 1970cc
1971-78 1586, 1796cc
1987-87 2555cc
334
1055
3055
6055
(C107)
(B107)
(A107)
1060
3060 or C
6060 or C
(C203 )
(B203 or B505)
(A203 or A505)
1085
3085
6085
APPLICATION
Cyl
YEAR
DURA-BOND PART #
.015"
.030"
.060"
"
1954-68 170, 180, 190, 220, 230, 250
1966-85 200, 230, 250, 280, 300, 380, 450, 600, 690
1030
3030
6030
(C106)
(B106)
(A106)
1120
3120
6120
(C301)
(B301)
(A301)
MERCURY (SEE FORD)
MERCURY MARINE
4, 6, 8 cyl
153, 181, 230, 250, 283, 302, 305, 350ci Chevrolet
6, 8 cyl
224 (Mercruiser 470 Series Eng.), 351ci Ford
8 cyl
302ci Ford
"
454ci Chevrolet
1060
3060 or C
6060 or C
(C203 )
(B203 or B505)
(A203 or A505)
1160
3160 or C
6160 or C
(C103)
(B103 or B503)
(A103 or A503)
1110
3110 or C
6110 or C
(C102)
(B102 or B502)
(A102 or A502)
1150
3150
6150
(C303)
(B303)
(A303)
MINNEAPOLIS-MOLINE
4 cyl
EE, RE, 165-4, 206-4, G4, H-4, L-4, D206-4
4 - 6 cyl
KEF, 283-A4, 403A, 403C, 425A, 426A
W/ROTO CAP
605-6A, 800-6A, 1210-12A, HD-800-6A
W/O ROTO CAP
1090
3090
6090
(C100)
(B100)
(A100)
1160
3160
6160
(C103)
(B103)
(A103)
---
3220-I
6220-I
(B406)
(A406)
M.G.
4 cyl
"
"
1957-69 Magnette, MGA
1961-78 Midget, 1100, MK111
1080
3080
6080
(C302)
(B302)
(A302)
1030
3030
6030
(C106)
(B106)
(A106)
1100
3100
6100
(C200)
(B200)
(A200)
1981-89 156ci, 2555cc (G54B Mitsubishi)
1085
3085
6085
1974-82 1237, 1288, 1397, 1488cc
1048
3048
6048
1012
1160
3012
3160 or C
6012
6160 or C
(C103)
(B103 or B503)
(A103 or A503)
1012
1160
3012
3160 or C
6012
6160 or C
(C103)
(B103 or B503)
(A103 or A503)
1946-81 1622, 1798cc, TD, TC, TF, MKII
MITSUBISHI
4 cyl
NISSAN
4 cyl
"
1972-84 1597(L16), 1770(L18), 1952, 2187, 2390cc
INNER
OUTER
6 cyl
1974-84 2393, 2565, 2753cc
INNER
OUTER
335
SHIMS
4, 6 cyl
MERCEDES
APPLICATION
SHIMS
Cyl
YEAR
DURA-BOND PART #
.015"
.030"
.060"
OPEL
4 cyl
"
1962-70 986cc, 1100cc-1.1L
1957-78 1200, 1500, 1700, 1900, 2500cc, 1.2-2.5L
1030
3030
6030
(C106)
(B106)
(A106)
1100
3100
6100
(C200)
(B200)
(A200)
PERKINS
3, 4, 6 cyl
152.7ci (3A152), 203.6ci (4A203), 305ci (6.305)
4 - 6 cyl
235.9ci (G4236), 248.2ci (4.248),
1055
3055
6055
(C107)
(B107)
(A107)
---
3130-I
6130-I
(B403)
(A403)
354ci ( D354 6.354 Diesel and Turbo Diesel)
PEUGEOT
4 cyl
1955-78 403, 404, 504 Series
1040
3040
6040
(C300)
(B300)
(A300)
PINTO (SEE FORD)
PLYMOUTH (SEE CHRYSLER)
PONTIAC (SEE GENERAL MOTORS)
PORSCHE
4, 6 cyl
"
6 cyl
1970-76 914, 1.7, 1.8, 2.0L
1959-69 1300, 1500, 1660cc
1963-90 911
1090
3090
6090
(C100)
(B100)
(A100)
1055
3055
6055
(C107)
(B107)
(A107)
1095
3095
6095
RAMBLER (SEE AMERICAN MOTORS)
RENAULT
4 cyl
1957-78 748, 760, 845, 950, 1108, R-10
1010
3010
6010
(C202)
(B202)
(A202)
---
3180-I
6180-I
(B401)
(A401)
REO
6 - 8 cyl
OA110, 0A130, 0A145, OA255, OA292, OA331,
OH160, OH170, OH185, OH186, OH200, OV195,
OV200, OV207, OV220, OV225, OV235
336
APPLICATION
Cyl
YEAR
DURA-BOND PART #
.015"
.030"
.060"
Most Models
1050
3050
6050
(C105)
(B105)
(A105)
SIMCA
4 cyl
1955-71 1000, 1090, 1118, 1204, 1221, 1290
1010
3010
6010
(C202)
(B202)
(A202)
STUDEBAKER
6 cyl
"
8 cyl
"
1938-64
1965-66
1952-64
1965-66
1040
3040
6040
(C300)
(B300)
(A300)
1070
3070
6070
(C201)
(B201)
(A201)
1040
3040
6040
(C300)
(B300)
(A300)
1070
3070
6070
(C201)
(B201)
(A201)
SUBARU
4 cyl
"
1973-76 1361
1978-85 1600, 1800
1055
3055
6055
(C107)
(B107)
(A107)
1065
3065
6065
(C107S)
(B107S)
(A107S)
SUNBEAM
4 cyl
"
1959-68 Most Models
1964-68 875
1040
3040
6040
(C300)
(B300)
(A300)
1010
3010
6010
(C202)
(B202)
(A202)
1048
3048
6048
TOYOTA
4 - 6 cyl
1960-85 1077, 1166, 1290cc (4KC, KE), 1452, 1490, 1897, 1968, 1994,
2189, 2253, 2563, 3878, 4230cc, 3KC
4 cyl
4 - 6 cyl
1971-82 1588cc (2TC), 1770cc (3TC), Corona
1975-90 1595cc Diesel, 1838cc Diesel, 1995cc (2SELC), 1998cc,
2158cc Diesel, 2189cc (20R), 2367cc (22R), 2367cc,
1055
3055
6055
(C107)
(B107)
(A107)
1080
3080
6080
(C302)
(B302)
(A302)
3878cc (F), 4230cc (2F)
4 cyl
"
1968-71 1858, 1968cc
1970-76 1858cc (8RC), 1968cc (18RC)
INNER
OUTER
6 cyl
1971-76 2563cc (4M, 4ME), 2759cc (5ME, 5MGE) Corona Mark II
337
1150
3150
6150
(C303)
(B303)
(A303)
1020
3020
6020
(C101)
(B101)
(A101)
1090
3090
6090
(C100)
(B100)
(A100)
1100
3100
6100
(C200)
(B200)
(A200)
SHIMS
4 - 6 cyl
SAAB
APPLICATION
SHIMS
Cyl
YEAR
DURA-BOND PART #
.015"
.030"
.060"
TRIUMPH
4 cyl
1952-68 TR3, 4, 4A
INNER
OUTER
4 - 6 cyl
"
1962-85 Spitfire, TR6, TR7, TR-250
1959-74 MK III, Sport 6, GT6
1020
3020
6020
(C101)
(B101)
(A101)
1120
3120
6120
(C301)
(B301)
(A301)
1030
3030
6030
(C106)
(B106)
(A106)
1020
3020
6020
(C101)
(B101)
(A101)
VAUXHALL
4 cyl
1963-70 1057, 1159
6 cyl
Most Models
1030
3030
6030
(C106)
(B106)
(A106)
1060
3060
6060
(C203)
(B203)
(A203)
VEGA (SEE GENERAL MOTORS)
VOLKSWAGEN
4 cyl
"
1947-65 1192cc 40 hp Type I, II
1961-78 1285cc, 1300cc, 1493cc, 1584cc, 1697cc
Type I, II, III
"
1972-86 1795cc, 1970cc, 2144cc
Type II
"
1977-86 Rabbit, Dasher, Scirocco, Golf, Jetta
Re-machined pad area .675 X 1.25
1030
3030
6030
(C106)
(B106)
(A106)
1050
3050
6050
(C105)
(B105)
(A105)
1055
3055
6055
(C107)
(B107)
(A107)
1055
3055
6055
(C107)
(B107)
(A107)
1065
3065
6065
(C107S)
(B107S)
(A107S)
VOLVO
4, 6 Cyl
Most Models, 1780, B18A, B, D, 1990, B20A,
1020
3020
6020
B, E, F, 2979, B30A, 3, F
(C101)
(B101)
(A101)
B-21, D24, B27
1095
3095
6095
---
3045-I
6045-I
(B407)
(A407)
WAUKESHA
4 - 6 cyl
"
"
"
FC, FK
ICK
XAH
VIK, VIM
338
1005
3005
6005
(C204)
(B204)
(A204)
1020
3020
6020
(C101)
(B101)
(A101)
1156-I
3156-I
6156-I
(C404)
(B404)
(A404)
APPLICATION
Cyl
YEAR
DURA-BOND PART #
.015"
.030"
.060"
140 Series, F554G
INNER
OUTER
"
180, 185, 190
"
6MRL-MZ-MZA-MZB
"
6LRO, 6NK, F817G, F1905G, F2894G, 145 Series
1090
3090
6090
(C100)
(B100)
(A100)
---
3220-I
6220-I
(B406-I)
(A406-I)
1025
3025
6025
(C104)
(B104)
(A104)
1030
3030
6030
(C106)
(B106)
(A106)
---
3190-I
6190-I
(B402)
(A402)
WHITE
4, 6 cyl
55A, EN601
"
110A, 130A, 145A, 170A, 185A, 186A, 200A, 235A
"
116A, 120A, 130A, 140A, 150A, 230A, 250A
"
260A, 280A, 290A, 370A, 380A, 390A, 470A, 477A,
1060
3060
6060
(C203)
(B203)
(A203)
---
3180-I
6180-I
(B401)
(A401)
1040
3040
6040
(C300)
(B300)
(A300)
---
3130-I
6130-I
(B403)
(A403)
3045-I
6045-I
490A, 531A
"
---
450A, 460A, 462A
"
EN602
(B407)
(A407)
1160
3160 or C
6060 or C
(C103)
(B103 or B503)
(A103 or A503)
WILLYS-JEEP
4 cyl
"
6 cyl
"
"
"
8 cyl
"
1941-72 134ci
1977-83 121, 151ci
1966-72 225ci
1954-62 226ci
1962-70 230ci
1966-83 232, 258ci
1966-77 304, 327, 360, 401ci
1968-77 350ci
1060
3060
6060
(C203)
(B203)
(A203)
1070
3070
6070
(C201)
(B201)
(A201)
1060
3060
6060
(C203)
(B203)
(A203)
1040
3040
6040
(C300)
(B300)
(A300)
1100
3100
6100
(C200)
(B200)
(A200)
1060
3060
6060
(C203)
(B203)
(A203)
1060
3060
6060
(C203)
(B203)
(A203)
1070
3070
6070
(C201)
(B201)
(A201)
WISCONSIN
1, 2, 4 cyl
Most Models use, AD, ADH, AE, AEH, AEM, AEN,
1030
3030
6030
TE,TED, VE4, VE41, VE4D, TF, TFD, TH, THD, TJD,
(C106)
(B106)
(A106)
VF4, VFD, VF4D, VH4, VH4D, VH4DM
339
SHIMS
4 - 6 cyl
WAUKESHA (CONT'D)
SHIM
NUMERICAL LISTING
NUMERICAL LISTING BY PART NUMBER
Part Number
Part Number
Part Number
.015 Thickness
.030 Thickness
.060 Thickness
(C204S)
3003
(B204S)
6003
(A204S)
1003
(C204)
(B204)
(A204)
1005
3005
6005
(C202)
(B202)
(A202)
1010
3010
6010
1012
3012
6012
1015
3015
6015
(C101)
(B101)
(A101)
1020
3020
6020
1022
3022
6022
(C104)
(B104)
(A104)
1025
3025
6025
(C106)
(B106)
(A106)
1030
3030
6030
(C300)
(B300)
(A300)
1040
3040
6040
(C408)
(B408)
(A408)
1043
3043
6043
--3045-I (B407)
6045-I (A407)
1048
3048
6048
(C105)
(B105)
(A105)
1050
3050
6050
1052
3052
6052
(C107)
(B107)
(A107)
1055
3055
6055
(C203)
(B203)
(A203)
1060
3060
6060
--3060-C (B505)
6060-C (A505)
(C107S)
(B107S)
(A107S)
1065
3065
6065
(C201)
(B201)
(A201)
1070
3070
6070
(C302)
(B302)
(A302)
1080
3080
6080
1085
3085
6085
1087
3087
6087
(C100)
(B100)
(A100)
1090
3090
6090
1095
3095
6095
(C200)
(B200)
(A200)
1100
3100
6100
(C102)
(B102)
(A102)
1110
3110
6110
--3110-C (B502)
6110-C (A502)
(C301)
(B301)
(A301)
1120
3120
6120
1125
3125
6125
1127
3127
6127
--3130-I (B403)
6130-I (A403)
(C306)
(B306)
(A306)
1135
3135
6135
(C305)
(B305)
(A305)
1140
3140
6140
(C109)
(B109)
(A109)
1145
3145
6145
(C303)
(B303)
(A303)
1150
3150
6150
(C602)
(B602)
(A602)
1152
3152
6152
(C306S)
(B306S)
(A306S)
1153
3153
6153
(B506)
--3153-C
6153-C (A506)
(C404)
(B404)
1156-I
3156-I
6156-I (A404)
(C103)
(B103)
(A103)
1160
3160
6160
--3160-C (B503)
6160-C (A503)
(C304)
(B304)
(A304)
1170
3170
6170
--3180-I (B401)
6180-I (A401)
1185-S-HP (C601) 3185-S-HP (B601) 6185-S-HP (A601)
--3190-I (B402)
6190-I (A402)
--3200-I (B400)
6200-I (A400)
--3210-I (B405)
6210-I (A405)
--3220-I (B406)
6220-I (A406)
340
O.D.
I.D.
0.760
0.796
0.915
0.960
0.960
1.000
1.000
1.002
1.100
1.124
1.140
1.162
1.215
1.215
1.247
1.250
1.246
1.399
1.250
1.247
1.311
1.311
1.311
1.311
1.330
1.356
1.358
1.544
1.375
1.375
1.384
1.374
1.438
1.438
1.438
1.476
1.477
1.500
1.633
1.502
1.500
1.633
1.503
1.604
1.634
1.689
1.751
1.750
1.751
0.578
0.515
0.643
0.515
0.625
0.688
0.515
0.766
0.721
0.721
0.570
0.825
0.515
0.876
0.518
0.625
0.814
0.819
0.688
0.877
0.766
0.840
0.890
0.955
0.600
0.642
1.000
1.025
0.766
1.000
1.018
0.782
0.645
0.766
1.059
0.705
0.765
0.645
0.645
0.874
1.030
1.055
1.155
0.820
0.643
1.280
0.818
0.890
1.328
0.515
0.515
0.515
0.515
0.518
0.570
0.578
0.600
0.625
0.625
0.642
0.643
0.643
0.645
0.645
0.645
0.688
0.688
0.705
0.721
0.721
0.765
0.766
0.766
0.766
0.766
0.782
0.814
0.818
0.819
0.820
0.825
0.840
0.874
0.876
0.877
0.890
0.890
0.955
1.000
1.000
1.018
1.025
1.030
1.055
1.059
1.155
1.280
1.328
0.796
0.960
1.000
1.215
1.247
1.140
0.760
1.330
0.960
1.250
1.356
0.915
1.634
1.438
1.500
1.633
1.000
1.250
1.476
1.100
1.124
1.477
1.002
1.311
1.375
1.438
1.374
1.246
1.751
1.399
1.604
1.162
1.311
1.502
1.215
1.247
1.311
1.750
1.311
1.358
1.375
1.384
1.544
1.500
1.633
1.438
1.503
1.689
1.751
Part Number
Part Number
Part Number
.015 Thickness
.030 Thickness
.060 Thickness
(C204)
(B204)
(A204)
1005
3005
6005
1012
3012
6012
1022
3022
6022
1048
3048
6048
1052
3052
6052
(C408)
(B408)
(A408)
1043
3043
6043
1003
(C204S)
3003
(B204S)
6003
(A204S)
1095
3095
6095
1015
3015
6015
(C107)
(B107)
(A107)
1055
3055
6055
(C200)
(B200)
(A200)
1100
3100
6100
(C202)
(B202)
(A202)
1010
3010
6010
1185-S-HP (C601) 3185-S-HP (B601)
6185-S-HP (A601)
(C306)
(B306)
(A306)
1135
3135
6135
(C306S)
(B306S)
(A306S)
1153
3153
6153
(A506)
--3153-C (B506)
6153-C
(C101)
(B101)
(A101)
1020
3020
6020
(C107S)
(B107S)
(A107S)
1065
3065
6065
(C303)
(B303)
(A303)
1150
3150
6150
(C106)
(B106)
(A106)
1030
3030
6030
(C300)
(B300)
(A300)
1040
3040
6040
(C602)
(B602)
(A602)
1152
3152
6152
(C104)
(B104)
(A104)
1025
3025
6025
(C302)
(B302)
(A302)
1080
3080
6080
(C301)
(B301)
(A301)
1120
3120
6120
(C305)
(B305)
(A305)
1140
3140
6140
(A403)
--3130-I (B403)
6130-I
(C203)
(B203)
(A203)
1060
3060
6060
(A400)
--3200-I (B400)
6200-I
(A505)
--3060-C (B505)
6060-C
(A401)
--3180-I (B401)
6180-I
(A407)
--3045-I (B407)
6045-I
1085
3085
6085
(A404)
1156-I (C404)
3156-I (B404)
6156-I
(C105)
(B105)
(A105)
1050
3050
6050
(C201)
(B201)
(A201)
1070
3070
6070
1087
3087
6087
(A405)
--3210-I (B405)
6210-I
(C100)
(B100)
(A100)
1090
3090
6090
(C102)
(B102)
(A102)
1110
3110
6110
1125
3125
6125
1127
3127
6127
(A502)
--3110-C (B502)
6110-C
(C103)
(B103)
(A103)
1160
3160
6160
(A503)
--3160-C (B503)
6160-C
(C109)
(B109)
(A109)
1145
3145
6145
(C304)
(B304)
(A304)
1170
3170
6170
(A402)
--3190-I (B402)
6190-I
(A406)
--3220-I (B406)
6220-I
341
SHIM
O.D.
PROGRESSIVE LISTING
BY INSIDE DIAMETER
I.D.
SHIM
PROGRESSIVE LISTING
BY OUTSIDE DIAMETER
O.D.
I.D.
0.760
0.796
0.915
0.960
0.960
1.000
1.000
1.002
1.100
1.124
1.140
1.162
1.215
1.215
1.246
1.247
1.247
1.250
1.250
1.311
1.311
1.311
1.311
1.330
1.356
1.358
1.374
1.375
1.375
1.384
1.399
1.438
1.438
1.438
1.476
1.477
1.500
1.500
1.502
1.503
1.544
1.604
1.633
1.633
1.634
1.689
1.750
1.751
1.751
0.578
0.515
0.643
0.515
0.625
0.515
0.688
0.766
0.721
0.721
0.570
0.825
0.515
0.876
0.814
0.518
0.877
0.625
0.688
0.766
0.840
0.890
0.955
0.600
0.642
1.000
0.782
0.766
1.000
1.018
0.819
0.645
0.766
1.059
0.705
0.765
0.645
1.030
0.874
1.155
1.025
0.820
0.645
1.055
0.643
1.280
0.890
0.818
1.328
Part Number
Part Number
Part Number
.015 Thickness
.030 Thickness
.060 Thickness
1003
(C204S)
3003
(B204S)
6003
(A204S)
(C204)
(B204)
(A204)
1005
3005
6005
(C202)
(B202)
(A202)
1010
3010
6010
1012
3012
6012
1015
3015
6015
1022
3022
6022
(C101)
(B101)
(A101)
1020
3020
6020
(C104)
(B104)
(A104)
1025
3025
6025
(C106)
(B106)
(A106)
1030
3030
6030
(C300)
(B300)
(A300)
1040
3040
6040
(C408)
(B408)
(A408)
1043
3043
6043
--3045-I (B407)
6045-I (A407)
1048
3048
6048
(C105)
(B105)
(A105)
1050
3050
6050
(C203)
(B203)
(A203)
1060
3060
6060
1052
3052
6052
(C201)
(B201)
(A201)
1070
3070
6070
(C107)
(B107)
(A107)
1055
3055
6055
(C107S)
(B107S)
(A107S)
1065
3065
6065
(C302)
(B302)
(A302)
1080
3080
6080
1085
3085
6085
1087
3087
6087
(C100)
(B100)
(A100)
1090
3090
6090
1095
3095
6095
(C200)
(B200)
(A200)
1100
3100
6100
(C102)
(B102)
(A102)
1110
3110
6110
--3130-I (B403)
6130-I (A403)
(C301)
(B301)
(A301)
1120
3120
6120
1125
3125
6125
1127
3127
6127
--3060-C (B505)
6060-C (A505)
(C306)
(B306)
(A306)
1135
3135
6135
(C305)
(B305)
(A305)
1140
3140
6140
1145
3145
6145
(C303)
(B303)
(A303)
1150
3150
6150
(C602)
(B602)
(A602)
1152
3152
6152
(C306S)
(B306S)
(A306S)
1153
3153
6153
(C103)
(B103)
(A103)
1160
3160
6160
(C404)
(B404)
1156-I
3156-I
6156-I (A404)
(C304)
(B304)
(A304)
1170
3170
6170
--3110-C (B502)
6110-C (A502)
--3180-I (B401)
6180-I (A401)
--3153-C (B506)
6153-C (A506)
--3160-C (B503)
6160-C (A503)
1185-S-HP (C601) 3185-S-HP (B601) 6185-S-HP (A601)
--3190-I (B402)
6190-I (A402)
--3210-I (B405)
6210-I (A405)
--3200-I (B400)
6200-I (A400)
--3220-I (B406)
6220-I (A406)
342
CAM BEARING COMPETITIVE INTERCHANGES
ACL - DURA-BOND BEARING SETS
ACL
1C069S
1C1094S
1C330S
2BS1403S
2BS1445S
2BS8078
2BS8286
2C026S
2C1095S
2C1209S
3BS8387
3C021S
3C023S
3C056S
3C1030S
3C1190S
3C1305S
3C191S
3C400S
3C4036
3C502S
3C507S
3C711S
3C733S
3C7936
D-B
J-1
FG-29
WA-4
PDG-29S
FG-51
TOG-9
TOG-8
PDG-26
FG-34
VWG-1
MIG-3
F-1
PD-1
CO-8
CH-16
CHG-14
CH-20
CO-3
CH-6
DA-3A
CA-3
IN-18
F-28
F-29
VO-2
ACL
3C8276S
3C8288S
4BS8000
4C048AS
4C048S
4C1002BS
4C1002S
4C1031BS
4C1031S
4C1089S
4C1102S
4C1102SW
4C1114S
4C1115S
4C1197S
4C1246S
4C1247S
4C1251S
4C1254BS
4C1254S
4C1351S
4C1405BS
4C1405S
4C1441AS
4C1441S
D-B
F-41
MIG-2
TOG-10
F-48A
F-48
F-47B
F-47
B-12B
B-12
CH-17
CH-18
CH-18A
PD-27
PD-21
F-45
B-13
O-8
F-46
F-49B
F-49
CH-21
PD-28B
PD-28
F-50A
F-50
ACL
4C1447S
4C1812S
4C190S
4C209S
4C220S
4C383S
4C399S
4C4036S
4C506S
4C533S
4C534S
4C549S
4C567BS
4C567S
4C652S
4C654S
4C690S
4C703S
4C718S
4C777BS
4C777S
4C7979
4C8076
4C874S
5C004AS
D-B
F-52
B-14
K-1
CH-2
IN-14
CH-3
CH-7
DA-5
B-6
F-22
F-7
N-7
F-23B
F-23A
F-43
F-31
CA-8
F-32
CH-11
F-34B
F-34
TO-10
TO-8
PD-18
CH-4A
ACL
5C1088S
5C1092S
5C1111S
5C1112S
5C1191S
5C1195S
5C1199S
5C1300S
5C1319S
5C1885S
5C277S
5C287S
5C290S
5C291S
5C292S
5C3346C
5C3349C
5C343S
5C361S
5C369S
5C4146
5C426S
5C510S
5C530S
5C559S
D-B
O-7
IN-17
F-30
PD-25
CA-9
CH-19
GM-7
C-4
F-9B
IN-21
C-2
CH-4
CH-8
P-3
P-4
GMP-8
CHP-8
F-12
B-8
F-16
DA-1
IN-11
F-18
C-3
F-9A
ACL
5C615S
5C616S
5C638S
5C643S
5C653S
5C671S
5C679S
5C680S
5C710S
5C716S
5C781S
5C7969
5C8045
5C8186
5C875S
5C876S
5SC761
6BS8033
6C1100S
6C1201S
6C1300S
D-B
CH-9A
CH-12
O-6
F-24
F-44
N-9
B-11
B-9
F-26
CH-13
F-33
TO-11
TO-12
TO-7
PD-16
PD-17
MIA-1
MZG-3
FA-3
FA-4
PD-30
SH1006S
SH1011S
SH1017S
SH1030S
SH1060S
SH1065S
SH1066S
SH1092S
SH1094S
SH1095S
SH1111S
SH1112S
SH1114S
SH1115S
SH1119S
SH1131S
SH1155S
SH116S
SH1190S
SH1191S
SH1193S
SH1197S
SH1209S
SH1245S
SH1248S
SH1251S
SH1254S
SH1305S
SH1315S
SH1321S
SH1326S
SH1334S
SH1349S
SH1350S
D-B
F-54
DB-1
F-53
CH-16
TO-10
TO-11
F-41
IN-17
FG-29
FG-34
F-30
PD-25
PD-27
PD-21
NI-1
MZ-1
MI-1
IN-5
CHG-14
CA-9
OP-5
F-45
VWG-1
CAT-2
TO-13
F-46
F-49
CH-20
PD-15
FP-18
PDG-26
F-48
CH-8
CH-17
CLEVITE
SH1351S
SH1352S
SH1353S
SH1354S
SH1355S
SH1356S
SH1360S
SH1361S
SH1364S
SH1365S
SH1366S
SH1371S
SH1382S
SH1385S
SH1386S
SH1390S
SH1394S
SH1395S
SH1396S
SH1401S
SH1402
SH1403
SH1404
SH1405S
SH1429S
SH1430S
SH1431S
SH1441S
SH1445S
SH1447S
SH1448S
SH1450S
SH1455S
SH1457S
D-B
CH-21
CH-4A
O-5
O-6
O-7
O-8
B-11
B-9
CH-18
CH-19
GM-7
C-4
CU-13
B-12
F-31
F-47
CU-11
CU-11A
TO-12
CHP-8R2
CA-11
PDG-29S
CU-12
PD-28
MIG-2
TO-14
IZ-7
F-50
F-51
F-52
B-13
MA-8
DI-2
IZ-3
CLEVITE
SH145S
SH1462S
SH1463S
SH1465S
SH1469S
SH1481S
SH1526S
SH1529S
SH1762S
SH1780S
SH1789S
SH178S
SH1793S
SH182S
SH186S
SH190S
SH191S
SH192S
SH195S
SH197S
SH198S
SH199S
SH209S
SH214S
SH21S
SH220S
SH229S
SH230S
SH246S
SH250S
SH252S
SH271S
SH277S
SH287S
D-B
B-1
IZ-1
IZ-5
MIG-1
MIG-3
TO-15
FG-51
CU-9
CAT-1
CHG-22
F-48A
S-1
MZG-3
S-2
CO-7
K-1
CO-3
CO-6
CO-5
HE-2
HE-1
F-5
CH-2
O-4
F-1
IN-14
S-3
S-4
IN-9
F-8
R-1
F-10
C-2
CH-4
Reference interchange only. Check manufacture specifications prior to installation.
343
CLEVITE
SH290S
SH291S
SH292S
SH307S
SH308S
SH313S
SH322S
SH330S
SH331S
SH338S
SH343S
SH344S
SH348S
SH354S
SH357S
SH359S
SH361S
SH366S
SH368S
SH369S
SH371S
SH376S
SH37S
SH381S
SH382S
SH383S
SH384S
SH385S
SH386S
SH398S
SH399S
SH400S
SH415S
SH419S
D-B
CH-8
P-3
P-4
CA-2
CA-1
PD-8
HE-5
WA-4
WA-3
H-5
F-12
F-11
N-1A
IN-15
MA-3
MA-2
B-8
MA-1
MA-4
F-16
F-14
F-15
PD-3
W-2
W-2A
CH-3
A-1
A-2
BU-2
CH-5
CH-7
CH-6
GM-5
GM-6
CLEVITE
SH426S
SH451S
SH452S
SH45S
SH464S
SH473S
SH474S
SH477WS
SH481S
SH493S
SH500S
SH501S
SH502S
SH506S
SH507S
SH510S
SH528S
SH529S
SH530S
SH531S
SH533S
SH534S
SH538S
SH543S
SH549S
SH558S
SH559S
SH559S
SH561S
SH562S
SH563S
SH566WS
SH567S
SH567S
D-B
IN-11
WA-6
HE-6
OP-2
F-19
K-2
K-3
DE-6-1WS
DA-2
IN-3
JD-1
JD-2
CA-3
B-6
IN-18
F-18
S-5
N-6
C-3
JD-5
F-22
F-7
IN-16
IN-20
N-7
IN-12
F-9A
F-9B
HE-7
HE-8
MAG-10
MA-7-1WS
F-23A
F-23B
INTERCHANGE
CLEVITE
CAM BEARING COMPETITIVE
A.E. CLEVITE (DANA) - DURA-BOND BEARING SETS
A.E. CLEVITE (DANA) - DURA-BOND BEARING SETS (CONTINUED)
INTERCHANGE
CLEVITE
SH568S
SH569S
SH56S
SH581S
SH587S
SH590S
SH593S
SH614S
SH615S
SH616S
SH628S
SH629S
SH643S
SH647S
SH652S
SH653S
SH669S
SH671S
SH676S
SH681S
SH690S
SH691S
SH694S
SH698S
SH699S
SH69S
SH700S
SH701S
SH703S
SH704S
SH705S
SH710S
SH711S
SH716S
SH718S
SH719S
SH720S
SH725S
SH730S
SH732S
SH733S
SH735S
SH767S
SH772S
SH777S
SH781S
SH785S
SH786S
SH791S
SH796S
SH84S
SH86S
SH874S
SH875S
SH876S
SH905S
SH906S
SH907S
SH951S
SH952S
SH978S
SH97S
SH993S
SH994S
SH99S
D-B
CU-5A
CU-10
CO-8
FT-1
OP-1
F-42
OP-4
WA-7
CH-9A
CH-12
A-5
A-4
F-24
GM-5
F-43
F-44
IND-6
N-9
MA-7
IN-10A
CA-8
MA-9
FT-3
DE-2
DE-2A
J-1
DE-7
DE-5
F-32
CA-6
CA-7
F-26
F-28
CH-13
CH-11
A-3
TO-3
TO-7
TO-8
F-25
F-29
VW-1
DA-1
DA-3A
F-34B
F-33
JD-4
JD-3
VO-2
OP-3
BL-1
IN-4
PD-18
PD-16
PD-17
IZ-8
IZ-6
IZ-2
NI-2
DA-5
TO-2
IN-7
MA-6
IN-19
IND-1
CLEVITE
D-B
INDIVIDUAL CAMSHAFT
BEARINGS
SH1001
SH1002
SH1003
SH1060
SH1061
SH1062
SH1063
SH1065
SH1067
SH1092
SH1093
SH1094
SH1095
SH1096
SH1111
SH1112
SH1113
SH1114
SH1115
SH1116
SH1117
SH1131
SH1132
SH116
SH117
SH118
SH1190
SH1191
SH1197
SH1198
SH1209
SH1210
SH1211
SH1245
SH1251
SH1252
SH1253
SH1254
SH1256
SH128
SH129
SH130
SH1305
SH1326
SH133
SH1334
SH1335
SH1336
SH134
SH1352
SH1354
SH1355
SH1356
SH1357
SH1358
SH1359
SH135L
SH135R
SH1360
SH1361
SH1362
SH1363
BL-1-1
BL-1-2
BL-1-3
TO-1-1
TO-1-2
TO-10-3
TO-1-4
TO-11-3
F-41-1
IN-17-1
IN-17-2
AGB-29-1
AGB-34-1
AGB-34-2
F-30-1
PD-25-2
PD-25-3
PD-25-4
PD-21-1
PD-21-2
PD-21-3
MZ-1-1
MZ-1-2
IN-5-1
IN-5-2
IN-5-3
AGB-14-1
CA-9-1
F-45-1
F-45-2
VWG-1-1
VWG-1-2
K-1-1
CAT-1-2
F-46-1
F-46-2
F-46-3
F-49-1
PDG-26-2
F-29-1
F-29-2
F-29-3A
CH-20-1
PDG-26-1
VW-1-1
F-48-1
F-48-2
F-48-4
VW-1-2
CH-4-1S1
O-6-1
O-6-2
O-6-3
O-6-4
O-6-5
O-7-1
VW-1-3 (U)
VW-1-3 (L)
B-11-1
B-9-2
CH-18-1A
CH-18-2
CLEVITE
SH1364
SH1365
SH1366
SH1367
SH1368
SH1369
SH1370
SH1371
SH1372
SH1373
SH1374
SH1375
SH1377
SH1378
SH1386
SH1387
SH1388
SH1389
SH1390
SH1391
SH1392
SH1393
SH1394
SH1395
SH1396
SH1397
SH1398
SH1399
SH1400
SH1402
SH1403
SH1404
SH1405
SH1406
SH1407
SH1408
SH1429
SH1441
SH1442
SH1443
SH1444
SH1446
SH1447
SH1448
SH1450
SH1463
SH1464
SH1487
SH1488
SH1526
SH1529
SH1762
SH1814
SH1815
SH1816
SH186
SH187
SH188
SH189
SH191
SH197
SH198
SH209
SH21
SH22
D-B
CH-18-4
CH-19-1
GM-7-1
GM-7-2
GM-7-3
GM-7-4
GM-7-5
C-4-1
C-4-2
C-4-3
C-4-4
C-4-5
CU-8-1
CU-9-2
F-31-1
F-31-2
F-31-3
F-31-4
F-47-1
F-47-2
F-47-3
F-47-4
CU-11-1
CU-11-2
TO-12-1
TO-12-2
TO-12-3
TO-12-4
TO-12-5
CA-11-1
PDG-29-1
CU-12-1
PD-28-1
PD-28-2
PD-28-3
PD-28-4
MIG-2-1
F-50-1
F-50-2
F-50-3
F-50-4
F-51-2
F-52-1
B-13-1
MA-8-1
IZ-5-1
IZ-5-2
CAT-4-2
CAT-4-1
AGB-51-1
CU-9-1
CAT-1-1
CH-10-1
CH-10-2
CH-10-3
CO-7-1
CO-7-2
CO-7-3
CO-7-4
K-1-2
HE-1-1
HE-1-2
CH-2-4
F-1-1
F-1-2
344
CLEVITE
SH220
SH221
SH222
SH224
SH23
SH24
SH249
SH25
SH250
SH252
SH253
SH254
SH255
SH263
SH264
SH265
SH277
SH278
SH285
SH287
SH288
SH289
SH290
SH291
SH292
SH313
SH314
SH315
SH318
SH322
SH323
SH324
SH326
SH327
SH328
SH329
SH33
SH330
SH331
SH332
SH333
SH338
SH339
SH34
SH340
SH341
SH342
SH343
SH344
SH35
SH351
SH352
SH354
SH355
SH356
SH357
SH361
SH363
SH364
SH365
SH369
SH37
SH370
SH375
SH377
D-B
IN-8-2
IN-2-3
IN-2-4
IN-8-4
PD-1-1
PD-1-2
F-7-2
PD-1-3
F-8-1
R-1-1
R-1-2
R-1-3
R-1-4
CH-3-1
CH-3-2
CH-3-3
C-2-1
C-2-2
F-9-1
CH-4-3
CH-4-2
CH-4-4
CH-4-1
P-3-1
P-3-2
PD-8-1
PD-8-2
PD-8-3
CU-1-1
HE-5-1
HE-5-2
O-5-1
PD-9-2
PD-9-3
PD-9-4
PD-9-5
CH-2-1
WA-1-1
WA-3-1
WA-3-2
WA-3-3
H-5-1
H-5-2
CH-2-2
H-5-3
H-5-4
H-5-5
F-12-1
F-11-2
CH-2-3
IN-10-2
IN-10-3
IN-15-1
IN-15-2
IN-15-3
MA-3A-1
B-4-1
B-4-3
B-4-4
B-4-5
F-16-1
PD-3-2
F-16-2
F-14-5
F-15-2
CLEVITE
SH378
SH379
SH38
SH380
SH383
SH384
SH385
SH386
SH387
SH388
SH398
SH399
SH400
SH401
SH403
SH404
SH405
SH406
SH412
SH413
SH414
SH424
SH425
SH426
SH427
SH428
SH429
SH430
SH455
SH464
SH465
SH466
SH467
SH470
SH471
SH472
SH481
SH482
SH483
SH493
SH500
SH501
SH502
SH503
SH504
SH506
SH507
SH508
SH509
SH510
SH511
SH512
SH513
SH514
SH518
SH529
SH530
SH531
SH532
SH533
SH538
SH539
SH549
SH550
SH551
D-B
F-15-3
F-15-4
PD-3-3
F-15-5
CH-3-4
A-1-1
A-2-1
BU-1-1
BU-1-2
BU-1-3
CH-5-1
CH-5-2
CH-5-3
CH-5-4
PD-12-2
PD-12-3
PD-12-4
PD-12-5
F-17-2
F-17-3
F-17-4
PD-13-3
PD-13-4
IN-11-1
IN-11-2
IN-11-3
IN-11-4
IN-11-5
IN-8-3
F-19-1
F-19-2
F-19-3
F-19-4
N-5-2
N-5-3
N-5-4
DA-2-1
DA-2-2
DA-2-3
IN-3A-1
JD-1-1
JD-1-2
CA-3-1
CA-3-2
CA-3-3
B-6-1
IN-18-1
IN-18-2
IN-18-3
F-18-1
F-18-2
F-18-3
F-18-4
F-18-5
CA-4-2
N-6-1
C-3-1
JD-5-1
JD-5-2
F-22-1
IN-16-1
IN-16-3
N-7-1
N-7-2
N-7-3
A.E. CLEVITE (DANA) - DURA-BOND INDIVIDUAL BEARINGS (CONTINUED)
CLEVITE
SH552
SH559
SH56
SH560
SH561
SH567
SH568
SH57
SH580
SH581
SH615
SH616
SH617
SH618
SH628
SH629
SH643
SH644
SH645
D-B
N-7-4
F-9-3
K-1-3
MA-5-1
HE-7-1
F-23-1A
CU-5-2A
K-1-4
FT-1-3
FT-1-2
CH-12-1
CH-12-2
CH-12-3
CH-9-4
A-3-1
A-3-2
F-24-2
F-24-3
F-24-4
CLEVITE
SH646
SH647
SH648
SH649
SH650
SH652
SH671
SH672
SH673
SH674
SH675
SH676
SH681
SH682
SH689
SH69
SH694
SH695
SH696
D-B
F-24-5
GM-5-1
GM-5-2
GM-5-3
GM-5-4
F-43-1
N-9-1
N-8-2
N-8-3
N-8-4
N-8-5
MA-5-3
IN-10-1A
IN-10-4A
CA-4-1
J-1-1
FT-3-1
FT-3-2
FT-3-3
CLEVITE
SH703
SH704
SH705
SH706
SH710
SH711
SH712
SH713
SH716
SH717
SH720
SH721
SH722
SH723
SH725
SH726
SH727
SH728
SH729
D-B
F-32-1
CA-6-1
CA-6-2
CA-6-3
F-26-1
F-28-1
F-28-2
F-28-3
CH-13-1
CH-13-2
TO-3-1
TO-3-2
TO-3-3
TO-3-4
TO-7-1
TO-7-2
TO-7-3
TO-7-4
TO-7-5
CLEVITE
SH730
SH731
SH759
SH760
SH762
SH763
SH765
SH767
SH768
SH769
SH770
SH771
SH772
SH774
SH777
SH781
SH786
SH796
SH797
D-B
TO-8-1
TO-8-2
TO-5-1
TO-5-2
TO-5-4
TO-5-5
DA-3-2
DA-1-1
DA-1-2
DA-1-3
DA-1-4
DA-1-5
DA-3-1
DA-3-3A
F-34-1
F-33-1
JD-3-1
VO-2-1
VO-2-2
CLEVITE
SH798
SH813
SH814
SH815
SH816
SH874
SH875
SH876
SH907
SH908
SH909
SH914
SH978
SH979
SH980
SH994
SH995
SH996
SH997
D-B
VO-2-3
OP-3-1
OP-3-2
OP-5-3
OP-3-3
PD-18-1
PD-16-1
PD-17-1
IZ-2-1
IZ-2-2
IZ-2-3
MZ-1-3
TO-2-1
TO-2-2
TO-2-3
IN-19-1
IN-19-2
IN-19-3
IN-19-4
ENGINE TECH / (ENGINE PRO) - DURA-BOND BEARING SETS
ENG. TECH
CC408
CC409
CC410
CC411
CC412
CC413
CC414
CC415
CC440
D-B
B-12
B-13
O-7
CH-12
B-12B
C-4A
CH-4
CH-21
F-18
ENG. TECH
CC441
CC442
CC443
CC444
CC445
CC445G
CC446
CC446G
CC447
D-B
F-34B
F-46
F-32
F-31
F-23A
F-23B
F-49
F-49B
F-45
ENG. TECH
CC448
CC449
CC450
CC451
CC452
CC453
CC454
CC455
CC470
D-B
F-26
F-33
F-30
F-48A
F-52
F-47B
F-50A
FG-51
PD-16
ENG. TECH
CC471
CC472
CC473
CC474
CC475
CC480
CC481
CC482
D-B
PD-18
PD-21
PD-27
PD-25
PD-28B
N-7
N-9
IN-11
ERTEL / NYLEN / OHIO (DYNAGEAR) - DURA-BOND BEARING SETS
ERTEL
11005M
11010M
11011M
11017M
11088M
11090M
11091M
11093M
11094M
11106M
11109M
11115M
11119M
11133M
11136M
11137M
11142M
11145M
11146M
11149M
11151M
11158M
11159M
11160M
11161M
D-B
F-1
PD-1
PD-3
A-2
K-1
HE-1
J-1
CO-3
CH-2
IN-5
IN-3
C-2
A-1
F-7
WA-3
WA-4
HE-5
CH-4
P-3
PD-8
BU-2
CO-8
F-12
F-9A
F-11
ERTEL
11164M
11170M
11176M
11179M
11183M
11198M
11202M
11203M
11204M
11205M
11206M
11209M
11216M
11218M
11219M
11220M
11222M
11223M
11227M
11234M
11235M
11244M
11254M
11255M
11267M
D-B
O-5
CH-3
H-5
F-16
IN-10A
GM-5
CH-6
CH-7
F-18
B-6
F-19
IN-14
C-3
IN-11
N-6
P-4
F-22
F-9B
CA-3
O-6
CH-8
N-7
CA-4
CH-9A
F-24
ERTEL
11269M
11275M
11325M
11401M
11403M
11404M
11410M
11411M
11412M
11414M
11421M
11422M
11436M
11437M
11439M
11441M
11442M
11443M
11444M
11445M
11447M
11450M
11451M
11453M
11454M
D-B
B-8
WA-7
DA-2
N-9
F-26
CH-12
CH-13
F-28
F-29
F-30
B-11
B-9
CH-16
B-12B
F-32
F-31
F-41
F-34
CHG-14
F-33
F-25
F-23A
PD-16
PD-17
PD-18
345
ERTEL
11457M
11463M
11464M
11466M
11467M
11473M
11477M
11478M
11482M
11484M
11485M
11487M
11489M
11493M
11494M
11496M
11497M
11498M
11499M
11501M
11557M
11561M
11564M
11565M
11566M
D-B
IS-1
CH-17
FG-34
O-7
IN-17
PD-21
F-43
F-44
CH-18
PD-25
CH-19
PDG-26
O-8
F-45
F-46
GM-7
CA-9
F-51
CH-21
F-50
CH-11
VO-2
TO-11
TO-3
TO-2
ERTEL
11569M
11570M
11592M
11708M
11726M
11731M
11735M
11738M
11755M
11756M
11757M
11771M
11777M
11781M
11790M
11792M
11793M
11805M
11807M
11809M
11824M
D-B
TO-8
DA-3A
DA-1
TO-7
VWG-1
FG-29
TO-10
DA-5
B-13
CH-20
C-4A
TO-12
F-48
F-49
PD-27
PDG-29S
F-47B
MIG-2
FG-51
PD-28B
F-52
INTERCHANGE
CH-8
CH-19
CH-16
CH-20
CH-18
CH-18A
CH-7
CH-11
CH-17
ENG. TECH
CC400
CC401
CC402
CC403
CC404
CC404B
CC405
CC406
CC407
D-B
FEDERAL-MOGUL - DURA-BOND BEARING SETS
INTERCHANGE
F-M
1005M
1010M
1011M
1017M
1077M
1081M
1088M
1089M
1090M
1091M
1093M
1094M
1106M
1107M
1112M
1114M
1115M
1118M
1119M
1120M
1121M
1124M
1125M
1130M
1133M
1134M
1136M
1137M
1139M
1142M
1144M
1145M
1146M
1148M
1149M
1151M
1152M
1157M
1158M
1159M
1160M
1161M
1164M
1165M
1166M
1167M
1170M
1173M
1174M
1175M
1176M
1177M
1178M
1179M
1183M
1192M
1193M
1198M
1202M
1203M
1204M
1205M
1206M
1207M
1209M
D-B
F-1
PD-1
PD-3
A-2
S-1
IN-4
K-1
F-5
HE-1
J-1
CO-3
CH-2
IN-5
S-3
O-4
R-1
C-2
J-2
A-1
CO-6
CO-5
IND-1
IN-7
HE-2
F-7
F-8
WA-3
WA-4
MA-1
HE-5
F-10A
CH-4
P-3
IN-9
PD-8
BU-2
CO-7
PD-9
CO-8
F-12
F-9A
F-11
O-5
MA-2
MA-3
W-4
CH-3
F-14
W-2
W-2A
H-5
CH-5
MA-4
F-16
IN-10
S-4
N-5
GM-5
CH-6
CH-7
F-18
B-6
F-19
K-2
IN-14
F-M
1211M
1213M
1216M
1218M
1219M
1220M
1222M
1223M
1225M
1226M
1227M
1228M
1229M
1230M
1234M
1235M
1236M
1244M
1246M
1248M
1251M
1252M
1253M
1254M
1255M
1258M
1259M
1260M
1267M
1269M
1270M
1271M
1275M
1294M
1327M
1401M
1402M
1403M
1404M
1406M
1407M
1408M
1409M
1410M
1412M
1414M
1418M
1421M
1422M
1424M
1425M
1426M
1427M
1428M
1434M
1435M
1438M
1439M
1441M
1442M
1443M
1444M
1445M
1447M
1449M
D-B
DE-2
DE-5
C-3
IN-11
N-6
P-4
F-22
F-9B
HE-7
HE-8
CA-3
IN-15
IN-3
IN-12
O-6
CH-8
HE-6
N-7
CU-5A
CU-6
JD-1
JD-2
CA-5
CA-4
CH-9A
IND-6
JD-3
JD-4
F-24
B-8
FT-3
N-8
WA-7
FT-1
TO-1
N-9
IN-16
F-26
CH-12
MA-5
MA-9
WA-6
MA-7
CH-13
F-29
F-30
WA-2
B-11
B-9
A-4
PD-14
CA-6
CA-7
A-5
GM-6
HE-9
CAT-2
F-32
F-31
F-41
F-34
CHG-14
F-33
F-25
CU-13
F-M
D-B
1450M
1451M
1453M
1454M
1458M
1459M
1460M
1461M
1462M
1463M
1466M
1467M
1470M
1473M
1474M
1477M
1478M
1479M
1484M
1485M
1486M
1487M
1488M
1489M
1491M
1492M
1493M
1494M
1495M
1496M
1497M
1543M
1557M
1561M
1564M
1565M
1566M
1569M
1570M
1571M
1591M
1592M
1672M
1697M
1708M
1713M
1726M
1729M
1730M
1731M
1732M
1734M
1735M
1736M
1737M
1738M
1746M
1749M
1750M
1752M
1753M
1755M
1756M
1757M
1758M
F-23A
PD-16
PD-17
PD-18
CU-14
F-28
FG-34
CH-16
B-12
CH-17
O-7
IN-17
IN-19
PD-21
CO-9
F-43
F-44
IN-10A
PD-25
CH-19
DE-4
PDG-26
CU-9
O-8
CA-8
CH-18
F-45
F-46
F-47
GM-7
CA-9
BL-1
CH-11
VO-2
TO-11
TO-3
TO-2
TO-8
DA-3A
PD-15
IN-18
DA-1
TO-11
VO-3
TO-7
VW-1
VWG-1
TOG-8
VW-2
FG-29
OP-1
DA-2
TO-10
OP-3
OP-5
DA-5
IZ-3
CH-8
CH-4A
CU-11A
CU-11
B-13
CH-20
C-4
TO-14
346
F-M
1760M
1762M
1771M
1774M
1777M
1781M
1782M
1785M
1787M
1789M
1790M
1792M
1794M
1804M
1805M
1807M
1808M
1809M
1810M
1837M
1838M
1839M
1840M
1842M
1843M
1844M
1845M
1847M
1848M
1849M
1855M
1856M
1857M
1858M
1859M
1860M
1861M
1862M
1863M
1864M
1866M
1867M
1868M
1869M
1870M
1871M
1872M
1874M
1881M
1885M
1886M
1889M
2101M
2107M
D-B
F-M
NI-2
DB-1
TO-12
TO-13
F-48
F-49
B-12B
CH-18
O-7
O-6
PD-27
PDG-29S
TO-7
IZ-8
MIG-2
FG-51
IZ-4
PD-28B
MIG-3
CH-8
F-47B
NIA-4
PDA-1
F-34B
F-48A
F-50
351HP
FA-2
FA-1
MI-1
CH-21
MZA-1
NIA-1
MIA-1
TOA-1
MIA-3
HA-1
HA-2
MZA-2
NIA-5
NIA-2L
NIA-2R
NIA-3L
NIA-3R
BMA-1
VOA-1
VWA-1
GMP-12
FG-53
IN-17
F-52
B-14
CHP-12
GMP-12
1074DR
1086DRI
1088DR
1091DRL
1091DRU
1092DRU
1093DRU
1101DR
1102DR
1103DR
1121DR
1122DR
1123DR
1124DR
1206DR
1207DR
1208DR
1209DR
1221DR
1222DR
1246DR
1247DR
1401DR
1402DR
1403DR
1404DR
1404DRI
1419DR
1421DR
1422DR
1496DRL
1496DRU
1497DRU
1557DR
1558DR
1559DR
1561DR
1563DR
1577DR
1578DR
1579DR
1616DR
1617DR
1618DR
1741DR
1742DR
1743DR
1744DR
1832DR
1833DR
1836DR
1838DR
1839DR
1841DRI
1846DR
1847DR
1848DR
1852DR
1866DR
1921DR
1922DR
1923DR
1924DR
1951DR
1952DR
INDIVIDUAL CAMSHAFT
BEARINGS
1058DRL
1058DRU
1059DRL
1059-DRU
1071DR
1072DR
1073DR
MZA-2-3 (L)
MZA-2-3 (U)
MZA-2-2 (L)
MZA-2-1 (U)
NI-2-1
NI-2-2
NI-2-3
D-B
NI-2-4
DE-6-1S
DE-6-2
HA-1-3 (L)
HA-1-2 (U)
HA-1-4 (U)
HA-1-4A (U)
IN-5-1
IN-5-2
IN-5-3
BMA-1-1
BMA-1-2
BMA-1-3
BMA-1-4
K-1-1
K-1-2
K-1-3
K-1-4
F-48-1
F-48-2
NIA-4-1
NIA-4-2
FA-1-1
FA-1-2
FA-1-3
FA-1-4
FA-1-5
CH-2-4
HE-5-1
HE-5-2
HA-1-5 (L)
HA-1-5 (U)
HA-1-1 (U)
P-3-1
O-5-1
P-3-2
C-2-1
C-2-2
IN-8-2
IN-8-3
IN-8-4
BU-1-1
BU-1-2
BU-1-3
R-1-1
R-1-2
R-1-3
R-1-4
F-7-2
F-22-1
F-8-1
F-12-1
F-11-2
PD-16-1
NIA-2-1
NIA-3-1
NIA-3-2
MA-3A-1
WA-1-1
PD-28-1
PD-28-2
PD-28-3
PD-28-4
CH-3-1
CH-3-2
FEDERAL-MOGUL - DURA-BOND INDIVIDUAL BEARINGS (CONTINUED)
F-M
1953DR
1961DR
1962DRI
2003DR
2004DRI
2021DR
2022DR
2023DR
2024DR
2046DR
2047DR
2048DR
2054DR
2101DR
2103DR
2103DRI
2104DR
2106DR
2107DR
2108DR
2132DR
2133DR
2133DRI
2134DR
2154DR
2197DR
2198DR
2231DR
2232DR
2233DR
2233DRI
2234DR
2286DR
2287DR
2288DR
2289DR
2301DRA
2302DR
2303DR
2303DRI
2304DR
2309DR
2316DR
2317DR
2321DRI
2322DR
2322DRA
2323DR
2323DRI
2324DR
2376DRA
2376DRI
2378DR
2378DRA
2379DR
2381DRA
2381DRB
2382DR
2382DRA
2383DR
2383DRA
2384DR
2401DR
2402DR
CH-3-3
CU-1-1
CU-5-2A
F-9-1
F-9-2B
CH-4-1
CH-4-2
CH-4-3
CH-4-4
PD-8-1
PD-8-2
PD-8-3
F-9-3
B-4-1
B-4-3
B-4-4
B-4-5
IN-15-1
IN-15-2
IN-15-3
PD-9-2
PD-9-4
PD-9-3
PD-9-5
CH-3-4
IN-10-2
IN-10-3
H-5-1
H-5-2
H-5-3
H-5-4
H-5-5
CH-5-1
CH-5-2
CH-5-3
CH-5-4
F-33-1
F-15-2
F-15-3
F-15-4
F-15-5
F-14-5
F-16-1
F-16-2
PD-17-1
PD-12-2
PD-21-2
PD-12-3
PD-12-4
PD-12-5
PD-21-1
PD-18-1
PD-13-3
PD-21-3
PD-13-4
F-32-1
F-46-1
F-17-2
F-46-2
F-17-3
F-46-3
F-17-4
GM-5-1
GM-5-2
2403DR
2404DR
2411DR
2412DR
2413DR
2413DRI
2414DR
2421DR
2431DRI
2432DRI
2433DR
2502DR
2526DR
2527DR
2528DR
2529DR
2531DR
2532DR
2533DR
2533DRI
2534DR
2534DRI
2556DR
2587DR
2588DR
2588DRI
2596DR
2597DR
2601DR
2601DRI
2602DR
2603DR
2603DRI
2604DR
2631DR
2632DR
2636DR
2637DR
2638DR
2686DR
2687DR
2688DR
2689DR
2727DR
2728DR
2729DRI
2786DRA
2787DRA
2788DRA
2849DR
2926DR
2927DR
2928DR
2941DR
3031DR
3046DR
3046DRI
3047DR
3048DR
3048DRI
3049DR
3056DRI
3057DRA
3057DRB
D-B
GM-5-3
GM-5-4
IN-11-1
IN-11-2
IN-11-3
IN-11-4
IN-11-5
IN-3A-1
CA-6-1
CA-6-2
CA-6-3
B-6-1
N-6-1
N-5-2
N-5-3
N-5-4
CAT-2-1
CAT-2-2
CAT-2-5
CAT-2-3
CAT-2-6
CAT-2-4
CH-20-1
F-19-2
F-19-3
F-19-4
JD-1-1
JD-1-2
F-18-1
F-26-1
F-18-2
F-18-3
F-18-4
F-18-5
MA-5-1
MA-5-2
CA-3-1
CA-3-2
CA-3-3
N-7-1
N-7-2
N-7-3
N-7-4
DB-1-2
DB-1-3
DB-1-4
F-28-1
F-28-2
F-28-3
FT-1-2
CO-9-1
CO-9-2
CO-9-3
C-3-1
HE-7-1
O-6-1
O-7-1
O-6-2
O-6-3
O-6-4
O-6-5
F-31-1
F-47-2
F-47-2B
F-M
D-B
3057DRI
3058DRA
3058DRB
3058DRI
3059DRA
3059DRI
3081DR
3082DR
3086DR
3106DR
3126DR
3151DRA
3152DR
3153DR
3191DRI
3192DRI
3193DRI
3194DR
3216DR
3217DR
3218DR
3219DR
3311DRI
3312DR
3313DR
3313DRI
3314DR
3321DRI
3322DR
3323DR
3324DR
3336DR
3338DR
3361DRI
3366DR
3367DR
3368DRA
3369DR
3426DR
3451DR
3452DR
3453DR
3456DR
3457DR
3489DR
3506DR
3507DR
3516DR
3517DR
3547DR
3547DRA
3548DR
3549DR
3571DR
3586DR
3596DR
3597DR
3681DR
3682DR
3731DR
3732DR
3766DRI
3767DR
3768DR
F-31-2
F-47-3
F-47-3B
F-31-3
F-47-4
F-31-4
CA-4-1
CA-4-2
CA-9-1
F-43-1
JD-3-1
F-23-1A
F-49-1
F-49-2
CH-12-1
CH-12-2
CH-12-3
CH-9-4
F-24-2
F-24-3
F-24-4
F-24-5
N-9-1
N-8-2
N-8-3
N-8-4
N-8-5
B-11-1
B-9-2
B-13-1
B-11-1B
IN-16-1
IN-16-3
F-30-1
F-29-1
F-29-2
F-29-3A
AGB-29-1
CH-4-1S1
PD-25-2
PD-25-3
PD-25-4
CH-13-1
CH-13-2
MIA-3-1
CU-11-1
CU-11-2
CAT-3-1
CAT-3-2
F-34-1
F-34-1B
AGB-34-1
AGB-34-2
AGB-14-1
F-19-1
IN-10-1A
IN-10-4A
CAT-4-1
CAT-4-2
IN-17-1
IN-17-2
CH-18-1A
CH-18-2
CH-18-4
347
F-M
3796DR
3801DR
3802DR
3803DR
3806DR
3808DR
3809DR
3809DRI
3826DR
3827DR
3828DR
3831DR
3832DR
3834DR
3861DR
3862DR
3863DR
3864DR
3866DR
3871DR
3872DR
3873DR
3874DR
3876DR
3961DRL
3961DRU
3962DRL
3981DR
3982DR
3983DR
3984DR
3986DR
4176DR
4177DR
4178DR
4206DR
4226DR
4227DR
4228DR
4231DRL
4231DRU
4261DR
4262DR
4263DR
4264DR
4291DR
4292DR
4293DR
4294DR
4366DRU
4367DRL
4367DRU
4368DRL
4368DRU
4511DR
4512DR
4513DR
60151DR
60152DR
60153DR
65326DR
65327DR
65328DR
65896DRA
D-B
F-M
CH-19-1
65897DRA
PDG-26-1
65898DRA
PDG-26-2
65899DR
PDG-29-1
66621DRL
FA-2-1
66621DRU
FA-2-3
67016DR
FA-2-4
67017DR
FA-2-5
67018DR
CU-9-1
67021DR
CU-9-2
67022DR
CU-8-1
67023DR
F-45-1
67031DR
F-45-2
67032DR
AGB-51-1
67034DR
GM-7-1
67034DRI
GM-7-2
67036DR
GM-7-3
67037DR
GM-7-4
67038DRI
GM-7-5
67039DR
C-4-1
67041DR
C-4-2
67042DR
C-4-3
67043DR
C-4-4
67271DR
C-4-5
67272DR
TOA-2-1 (L) 67273DR
TOA-1-1 (U) 67274DR
TOA-1-2 (L) 67276DR
TO-12-1
67277DR
TO-12-2
67278DR
TO-12-3
67279DR
TO-12-4
67279DRI
TO-12-5
67283DR
MZA-1-1
67284DR
MZA-1-2
67293DR
MZA-1-3
67321DR
CU-12-1
67322DR
NIA-1-1
67323DR
NIA-1-2
67324DR
NIA-1-3
67324DRI
PDA-1-1 (L) 67326DR
PDA-1-2 (U) 67327DR
MI-1-1
67328DR
MI-1-2
67381DRL
MI-1-3
67381DRU
MI-1-4
67382DRU
F-50-1
68096DR
F-50-2
68097DR
F-50-3
68311DR
F-50-4
68312DR
VWA-1-1 (U) 68313DR
VWA-1-5 (L) 68314DR
VWA-1-2 (U) 7100DR
VWA-1-3 (L) 7101DR
VWA-1-4 (U) 7102DR
CH-10-1
7103DR
CH-10-2
7104DR
CH-10-3
7105DR
IN-18-1
7106DR
IN-18-2
7107DR
IN-18-3
7108DR
VO-2-1
7109DR
VO-2-2
7110DR
VO-2-3
7111DR
OP-3-1
7112DR
D-B
OP-3-2
OP-3-3
OP-5-3
VOA-1-1 (L)
VHA-1-2 (U)
DA-3-1
DA-3-2
DA-3-3A
DA-2-1
DA-2-2
DA-2-3
TO-5-1
TO-5-2
TO-5-4
TO-5-5
TO-1-1
TO-1-2
TO-10-3
TO-1-4
TO-2-1
TO-2-2
TO-2-3
TO-3-1
TO-3-2
TO-3-3
TO-3-4
TO-7-1
TO-7-2
TO-7-3
TO-7-4
TO-7-5
TOG-8-1
TOG-8-2
TO-11-3
DA-1-1
DA-1-2
DA-1-3
DA-1-4
DA-1-5
IZ-3-1
IZ-3-2
IZ-3-3
MIA-1-4 (L)
MIA-1-3 (U)
MIA-1-1 (U)
VWG-1-1
VWG-1-2
IZ-6-1
IZ-6-2
MIG-2-2
MIG-2-1
351HP-1
351HP-2
351HP-3
351HP-4
351HP-5
CHP-4-1
CHP-4-2
CHP-4-3
CHP-12-1
CHP-12-2
CHP-12-3
FP-26-1
FP-18-2
INTERCHANGE
D-B
F-M
FEDERAL-MOGUL - DURA-BOND INDIVIDUAL BEARINGS (CONTINUED)
F-M
7113DR
7114DR
7115DR
7116DR
7117DR
7118DR
7120DR
7121DR
7122DR
D-B
FP-18-3
FP-18-4
FP-18-5
FP-30-1
GMP-1-1
FP-18-1
PDP-16-1
PDP-9-2
PDP-9-3
F-M
7123DR
7124DR
7125DR
7126DR
7127DR
7128DR
7129DR
7130DR
7131DR
D-B
F-M
D-B
PDP-9-4
PDP-9-5
PDP-25-2
PDP-25-3
PDP-25-4
PDP-17-1
PDP-12-2
PDP-12-3
PDP-12-4
7132-DR
8778DR
8779DR
9021DR
9023DR
9076DR
9207DR
9208DR
9216DR
PDP-12-5
IN-2-3
IN-2-4
F-1-1
F-1-2
PD-1-1
PD-1-2
PD-1-3
J-1-1
F-M
9386DR
9387DR
9391DR
9561DR
9563DR
9626DR
9627DR
9628DR
9696DR
D-B
HE-1-1
HE-1-2
A-2-1
PD-3-2
PD-3-3
WA-3-1
WA-3-2
WA-3-3
CH-2-1
F-M
9697DR
9698DR
9746DR
9906DR
9907DR
9908DR
9909DR
D-B
CH-2-2
CH-2-3
A-1-1
CO-7-1
CO-7-2
CO-7-3
CO-7-4
ITM/REPCO - DURA-BOND BEARING SETS
ITM
INTERCHANGE
1C5687
2C3301
2C9200
3C116
3C146
3C3300
3C4018
3C4036
3C4095
3C5156
3C5816
D-B
FG-29
TOG-8
FT-1
VW-1
VW-2
F-28
DA-2
DA-3A
BL-1
CH-6
F-29
ITM
3C6127
3C7936
3C8006
3C8276
3C8356
3C8839
3C8866
3C9021
3C9076
3C9201
3C9208
D-B
CH-14
VO-2
TO-2
F-41
MIG-1
CO-8
CO-3
F-1
PD-3
OP-1
PD-1
ITM
D-B
4C4072
4C4606
4C5059
4C5156
4C5157
4C5676
4C5776
4C7979
4C8066
4C8076
4C8246
F-31
PD-18
CH-3
CH-7
CH-11
F-22
F-23A
TO-10
TO-3
TO-8
DB-1
ITM
4C8779
4C8836
4C9206
4C9208
4C9215
4C9221
4C9796
5C1796
5C3346
5C3349
5C4146
D-B
IN-3
K-1
VO-3
F-34
F-47
F-46
IN-14
CU-11
CH-4
CH-8
DA-1
ITM
5C4636
5C5616
5C5696
5C5709
5C6529
5C7969
5C8186
5C9964
D-B
PD-16
F-18
F-26
F-9B
IN-11
TO-11
TO-7
VWG-1
KING BEARING - DURA-BOND BEARING SETS
KING
CS111BB
CS228BB
CS230BB
CS231BB
CS325BB
CS326BB
CS327BB
CS328BB
CS329BB
CS3301BB
CS330BB
CS331BB
CS332BB
CS333BB
D-B
FG-29
PDG-26
VWG-1
FG-51
CH-16
CH-20
MIG-2
FG-34
CHG-14
TOA-1
F-41
F-29
F-28
PD-1
KING
CS334BB
CS402BB
CS405BB
CS410BB
CS414BB
CS415BB
CS416BB
CS417BB
CS417BBX
CS418BB
CS419BB
CS420BB
CS421BB
CS422BB
D-B
CO-8
CH-7
CH-11
F-31
CH-17
B-12
PD-21
F-34
F-34B
F-32
F-23A
B-12B
B-13
N-7
KING
CS423BB
CS424BB
CS425BB
CS426BB
CS427BB
CS428BB
CS429BB
CS430BB
CS432BB
CS433BB
CS434BB
CS435BB
CS507BB
CS507HP
D-B
F-46
F-47B
F-48
F-45
F-49
CH-18A
CH-18
PD-27
F-52
K-1
CH-3
CH-21
CH-8
CHP-8
KING
CS508BB
CS509BB
CS510BB
CS511BB
CS512BB
CS514BB
CS515BB
CS516BB
CS517BB
CS524BB
CS525BB
CS526BB
CS527BB
CS528BB
D-B
B-9
O-6
O-7
P-4
PD-16
F-18
F-33
F-26
F-30
CH-12
C-4A
N-9
PD-25
CH-19
KING
CS529BB
CS530BB
CS531BB
CS532BB
CS533BB
CS534BB
CS535BB
CS536BB
CS537BB
CS538BB
CS539BB
CS540BB
D-B
DA-1
IN-11
CH-13
IN-17
PD-17
CH-4
C-4
GM-7
C-3
P-3
F-9A
F-16
MACHINE PRO - DURA-BOND BEARING SETS
MCHN PRO
MP101
MP102
MP103
MP104
MP105
MP106
MP107
MP108
MP109
MP110
D-B
CH-8
F-18
B-12
CH-18
F-23A
F-34
F-33
F-30
P-4
PD-16
MCHN PRO
MP111
MP112
MP113
MP114
MP115
MP116
MP117
MP118
MP119
MP120
D-B
O-6
N-7
N-9
F-26
CH-11
CH-16
CH-12
CH-17
CH-19
CH-20
MCHN PRO
MP121
MP122
MP123
MP124
MP125
MP126
MP127
MP128
MP129
MP130
D-B
CH-7
B-13
O-7
F-46
F-32
F-31
F-49
F-45
PD-25
PD-18
348
MCHN PRO
MP131
MP132
MP133
MP134
MP135
MP136
MP137
MP138
MP139
MP140
D-B
PD-21
PD-27
IN-11
F-48
F-52
C-4A
B-12B
CH-4
CH-18A
F-47B
MCHN PRO
MP141
MP142
MP143
MP144
MP145
MP146
MP147
MP148
D-B
FA-3
FG-34
FG-51
IN-17
MIA-1
N-7B
PDG-26
VWG-1
MAHLE - DURA-BOND BEARING SETS
MAHLE
014BS19536
014BS19537
014BS19539
014BS19540
014BS19541
014BS19542
014BS19543
014BS19544
014BS19545
014BS19546
014BS19547
D-B
F-18
F-23A
F-33
F-34
F-45
F-47B
F-49
F-50
F-52
FA-1
FA-3
MAHLE
014BS19548
014BS19549
014NB19588
014NB19590
014NB19591
014NB19592
014NB19593
014NB19594
014NB19595
014NB19596
014NB19612
D-B
FA-4
FG-51
F-23B
F-46
F-48
F-49B
F-50A
FA-2
FG-34
FG-53
IN-17
MAHLE
014NB19613
019BS19552
019BS19553
027BS19530
027BS19531
027BS19533
027BS19534
027BS19535
181BS19527
181BS19529
183NB19587
D-B
F-30
PD-16
PD-25
CH-12
CH-17
CH-6
CH-8
CH-9A
B-12
B-13
CU-12
MAHLE
513BS19551
513BS19555
513NB19589
513NB19598
513NB19599
513NB19600
513NB19603
513NB19604
513NB19605
513PS19554
599BS19532
D-B
N-7
PDG-26
F-32
MIA-1
MIG-2
N-9
PD-21
PD-27
PD-28
PDA-1
CH-18
MAHLE
599BS19538
599BS19582
599BS19583
599NB19584
599NB19585
599NB19586
599NB19597
599NB19601
599NB19602
607PS19556
676PS19550
D-B
F-26
B-12B
CH-16
CH-18A
CH-19
CH-21
GM-7
O-6
O-7
TOA-1
MIA-5
HI-TECH ENGINE COMPONENTS - DURA-BOND BEARING SETS
HI-TECH
BC398S
BC400S
BC399S
BC290S
BC615S
BC616SP
BC1350SP
BC287SP
BC290SP
BC56S
BC1394S
BC1395S
BC1404
BC568S
BC767S
BC772S
BC952S
BC21S
BC344S
BC343S
BC369S
BC510S
BC533S
BC2232S
BC643S
BC710S
BC711S
BC733S
BC1111S
BC1386S
BC703S
BC781S
D-B
CH-5
CH-6
CH-7
CH-8
CH-9A
CHP-12
CHP-17
CHP-4
CHP-8
CO-8
CU-11
CU-11A
CU-12
CU-5A
DA-1
DA-3A
DA-5
F-1
F-11
F-12
F-16
F-18
F-22
F-23B
F-24
F-26
F-28
F-29
F-30
F-31
F-32
F-33
HI-TECH
BC777S
BC2142S
BC2347S
BC1066S
BC652S
BC652
BC653S
BC1197S
BC1251S
BC1390S
BC1334S
BC2482S
BC1254S
BC1441S
BC1447S
BC534S
BC559S
BC2392S
BC2321S
BC2323S
BC2324S
BC1094S
BC1095S
BC1526S
BC510SP
BC710SP
BC1111SP
BC781SP
BC647S
BC1366S
BC2712SP
BC2421S
D-B
F-34
F-34B
F-34S
F-41
F-43
F-43-1
F-44
F-45
F-46
F-47B
F-48
F-48A
F-49
F-50
F-52
F-7
F-9A
F-9B
FA-1
FA-3
FA-4
FG-29
FG-34
FG-51
FP-18
FP-26
FP-30
FP-33
GM-5
GM-7
GMP-12
HA-1
HI-TECH
BC198S
BC681S
BC426S
BC220S
BC354S
BC538S
BC1092S
BC507S
BC994S
BC493S
BC116S
BC69S
BC500S
BC785S
BC190S
BC2411S
BC2423S
BC2424S
BC2425S
BC1429S
BC2413S
BC549S
BC671S
BC2621S
BC2225S
BC2227S
BC2605S
BC1354S
BC1355S
BC1356S
BC292S
BC23S
D-B
HE-1
IN-10A
IN-11
IN-14
IN-15
IN-16
IN-17
IN-18
IN-19
IN-3
IN-5
J-1
JD-1
JD-4
K-1
MIA-1
MIA-3
MIA-4
MIA-5
MIG-2
MIG-2E
N-7
N-9
NIA-1
NIA-2L
NIA-2R
NIA-5
O-6
O-7
O-8
P-4
PD-1
HI-TECH
BC875S
BC876S
BC874S
BC1115S
BC1112S
BC1114S
BC1405S
BC37S
BC313S
BC2311S
BC1326S
BC1403S
BC875SP
BC876SP
BC292SP
BC1060S
BC1065S
BC2602S
BC720S
BC725S
BC730S
BC2021S
BC791S
BC2121S
BC2822S
BC1209S
BC330S
BC614S
D-B
PD-16
PD-17
PD-18
PD-21
PD-25
PD-27
PD-28
PD-3
PD-8
PDA-1
PDG-26
PDG-29S
PDP-16
PDP-17
PP-4
TO-10
TO-11
TO-12
TO-3
TO-7
TO-8
TOA-1
VO-2
VOA-1
VWA-2
VWG-1
WA-4
WA-7
WOLVERINE - DURA-BOND BEARING SETS
WOLV.
CB-208
CB-209
CB-211
CB-251
CB-252
CB-255
CB-272
CB-282
CB-285
CB-285HP
CB-286
D-B
CH-4
CH-3
F-1
PD-17
PD-18
PD-16
CH-6
CH-7
F-18
FP-18
P-4
WOLV.
CB-288
CB-289
CB-289HP
CB-290
CB-293
CB-296
CB-296B
CB-298
CB-299
CB-302
CB-305
D-B
F-33
CH-8
CHP-8
CH-9A
C-3
F-23A
F-23B
F-16
H-5
O-6
N-7
WOLV.
CB-308
CB-309
CB-309HP
CB-310
CB-311
CB-312
CB-313
CB-314
CB-314HP
CB-315
CB-319
D-B
B-9
CH-12
CHP-12
F-32
CH-11
CH-13
F-29
F-26
FP-26
N-9
F-34
349
WOLV.
CB-319B
CB-320
CB-323
CB-324
CB-325
CB-326
CB-327
CB-327B
CB-328
CB-329
CB-331
D-B
F-34B
FG-34
O-7
CH-18
F-30
CH-16
B-12
B-12B
F-31
CHG-14
CH-17
WOLV.
CB-332
CB-335
CB-338
CB-339
CB-341
CB-342
CB-343
CB-344
CB-347
CB-349
CB-351
D-B
PD-21
DA-3A
TO-3
TO-7
TO-10
VO-2
VO-3
DA-2
PD-25
DA-1
F-28
INTERCHANGE
A-2
B-11
B-12
B-13
B-6
B-8
B-9
BMA-3
BMA-4
BP-13
BP-9
BU-2
C-2
C-3
C-4
C-4A
CA-3
CA-6
CA-7
CA-9
CH-11
CH-12
CH-16
CH-17
CH-17X10
CH-18
CH-19
CH-2
CH-20
CH-21
CH-3
CH-4
HI-TECH
BC385S
BC1360S
BC1385S
BC1448S
BC506S
BC361S
BC1361S
BC2613S
BC2614S
BC1448SP
BC1361SP
BC386S
BC277S
BC530S
BC1371S
BC1352S
BC502S
BC704S
BC705S
BC1191S
BC718S
BC616S
BC1030S
BC1350S
BC1350SX10
BC1364S
BC1365S
BC209S
BC1305S
BC1351S
BC383S
BC287S
D-B
WOLVERINE - DURA-BOND BEARING SETS (CONTINUED)
WOLV.
INTERCHANGE
B-13
CH-19
PDG-26
F-45
F-47
F-47B
CH-20
WOLV.
CB-359
CB-360
CB-361
CB-363
CB-364
CB-365
CB-365B
D-B
B-11
C-4
CH-2
F-46
F-48
F-49
F-49B
WOLV.
CB-366
CB-367
CB-368
CB-369
CB-370
CB372
CB-373
D-B
GM-7
IN-17
IN-11
PD-27
PD-28
VWG-1
MIG-2
CB-352
CB-353
CB-354
CB-355
CB-356
CB-356B
CB-357
D-B
350
WOLV.
CB-375
CB-376
CB-377
CB-378
CB-379
CB-381
CB-382
D-B
FG-51
F-52
F-50
PDA-1
PDA-2
FA-1
FA-2
WOLV.
CB-383
CB-384
CB-387HP
CB-559
D-B
HA-1
MIA-1
GMP-8
F-9A
VALVE SEAT COMPETITIVE INTERCHANGES
AE CLEVITE
DURA-BOND
DROP "27 PREFIX AND
USE SBI/JLOY
30000 Series
INTERCHANGE
70000 Series
BECK-ARNLEY
023-4024
023-4029
023-5025
023-5028
023-5029
023-5031
DANA/
PERFECT CIRCLE
218-3690
218-3786
DANA (cont'd)
218-7849
218-7850
218-7852
218-7855
218-7859
218-7860
218-7863
218-7864
218-7865
218-7866
218-7867
218-7868
218-7869
218-7871
218-7875
218-7881
218-7926
218-7927
218-7939
218-7943
218-7944
218-7945
218-7946
218-8439
218-8661
218-8783
218-8823
ELGIN
A1250-126-230
A1312-082-305
A1312-116-305
A1312-130-280
A1312-137-316
A1375-116-280
A1375-137-410
A1437-097-316
A1437-111-315
A1437-125-297
A1437-172-322
A1500-070-325
A1500-089-315
A1500-094-307
A1500-094-345
A1500-102-310
A1500-114-214
A1500-125-280
A1500-125-318
A1500-131-307
A1500-135-278
A1500-144-315
A1500-148-316
A1562-078-280
A1562-099-319
DURA-BOND
30024
30779
31239
31137
31243
30191
31246
31163
30663
30238
31281
31199
30717
31246
31185
30989
31244
30683
30165
31207
30824
30230
30779
31030
30509
30557
30989
ELGIN (cont'd)
A1562-109-344
A1562-137-280
A1562-148-315
A1562-175-317
A1625-102-315
A1625-125-317
A1625-148-280
A1625-156-300
A1687-062-305
A1687-125-297
A1750-070-310
A1750-075-280
A1750-087-316
A1750-102-302
A1812-075-307
A1812-100-315
A1812-114-315
A1812-116-307
A1812-131-278
A1812-165-315
A1875-094-317
A1875-125-280
A1937-123-379
I1125-125-219
I1250-125-250
I1312-125-188
I1375-125-219
I1375-125-250
DURA-BOND I1375-125-266
30230
I1375-156-188
30562
I1375-156-250
30562
I1437-094-219
31058
I1437-109-219
30563
I1437-125-219
31064
I1437-125-250
31063
I1437-156-188
30809
I1437-156-219
31329
I1437-156-250
30818
I1437-188-313
30806
I1500-082-219
30105
I1500-094-219
30191
I1500-125-188
30031
I1500-125-219
30148
I1500-125-250
30716
I1500-141-250
31207
I1500-156-219
30015
I1500-156-250
31235
I1562-094-219
31258
I1562-096-219
31244
I1562-096-250
30717
I1562-109-219
30045
I1562-125-188
31115
I1562-125-219
31199
I1562-125-250
CAUTION: These interchanged valve seats are close dimensionally. They are not necessarily exact duplicates. The suitablity for a
particular application must be determined by the installer.
351
DURA-BOND
31222
31286
31163
31287
30663
31218
30860
31223
30190
30881
31215
31209
30165
31117
31239
31243
31137
30030
30741
31284
31034
30683
31281
30754
31053
30775
30558
30791
31157
30786
30788
30556
31031
31030
31161
31225
30801
30802
30803
30705
31255
30710
30711
30712
30722
30823
30822
30841
30541
30503
31033
30840
30643
30644
INTERCHANGE
DURA-BOND
30648
30648+5
30646
30677
30678
30679
30652
30653
30654
31129
31373/71373
30673
71086
30655
30656
30904
30905
30658
30659
30672
30907
30919
31091
30671
30509
30932
30687
30682
30725
30726
30728
30729
30560
30700
30691
31380
31031
30664
30015
31209
31102
31115
30741
31247
30031
31235
30712
31151
30994
31064
30716
31215
31034
31218
VALVE SEAT COMPETITIVE
218-7349
218-7367
218-7369
218-7379
218-7389
218-7393
218-7395
218-7405
218-7411
218-7417
218-7418
218-7419
218-7421
218-7423
218-7425
218-7439
218-7441
218-7443
218-7445
218-7448
218-7463
218-7464
218-7471
218-7473
218-7481
218-7483
218-7493
218-7495
218-7497
218-7499
218-7501
218-7503
218-7505
218-7506
218-7507
218-7511
218-7525
218-7531
DANA (cont'd)
218-7535
218-7535+.005
218-7537
218-7543
DURA-BOND 218-7545
31139
218-7547
31107
218-7551
30563
218-7553
31047
218-7555
31105
218-7559
31258
218-7577
218-7581
218-7583
DURA-BOND 218-7585
70682
218-7587
71135
218-7595
30754
218-7597
31152
218-7617
31147
218-7619
30786
218-7623
30775
218-7627
30786
218-7631
31225
218-7635
70785
218-7651
30790
218-7661
31157
218-7669
30792
218-7677
31225
218-7687
30801
218-7703
30802
218-7705
30706
218-7707
31030
218-7708
31161
218-7729
30823
218-7733
30822
218-7751
31112
218-7813
30711
218-7819
30715
218-7820
30640
218-7822
30645
218-7824
30662
218-7825
30663
218-7827
30643
218-7828
30503
218-7829
30644
218-7831
30649
218-7833
30650
218-7839
30674
218-7840
30675
218-7841
31270
218-7842
30889
218-7843
70855
218-7844
30642/70642 218-7847
30841
218-7848
INTERCHANGE
ELGIN (cont'd)
I1562-125-281
I1562-125-313
I1562-156-219
I1562-156-250
I1625-125-219
I1625-125-250
I1625-156-219
I1625-156-250
I1625-156-250N
I1625-156-313
I1625-188-219
I1625-188-250
I1625-188-375
I1687-125-156
I1687-125-219
I1687-125-219N
I1687-125-250
I1687-125-313
I1687-141-250
I1687-141-250N
I1687-156-219
I1687-156-219N
I1687-156-250
I1687-156-315
I1687-172-315
I1687-188-219
I1687-188-250
I1687-188-313
I1750-125-219
I1750-125-219N
I1750-125-250
I1750-125-250N
I1750-156-219
I1750-156-219N
I1750-156-250
I1750-156-315
I1750-188-219
I1750-188-250
I1750-188-375
I1750-219-250
I1812-094-219
I1812-096-219
I1812-125-219
I1812-125-219N
I1812-125-250
I1812-125-313
I1812-156-219
I1812-156-250
I1812-156-313
I1812-172-250
I1812-188-250
I1875-094-219
I1875-125-219
I1875-125-250
DURA-BOND
31267
30731
30640
30645
30648
30646
30649
30650
70650
30651
30661
30662
30853
30872
30664
70664
30673
30733
30670
70670
30677
70677
30678
30679
30559
30674
30675
30676
30658
70658
30659
70659
30655
70655
30656
30657
30652
30653
31129
30889
30530
31283
30667
70667
30671
31000
30668
30672
30907
31089
30904
30681
30681
30682
ELGIN (cont'd)
I1875-125-313
I1875-141-250
I1875-156-219
I1875-156-250
I1875-188-250
I1937-094-219
I1937-125-219
I1937-125-250
I1937-125-313
I1937-156-219
I1937-188-250
I1937-188-250N
I1937-188-313
I2000-094-219
I2000-125-188
I2000-125-219
I2000-125-281
I2000-125-313
I2000-156-250
I2000-156-278
I2000-156-375
I2000-188-219
I2000-188-297
I2000-188-313
I2062-094-250
I2062-156-219
I2125-125-250
I2125-156-250
I2250-156-188
I2250-156-219
I2250-188-278
I2375-188-281
I2375-188-281N
FP DIESEL
FP-1805249
FP-1W5321
FP-3017759
FP-3032285
FP-5148490
FP-9M3205
KO LEE
J10
J10A
J10AR
J10AT
J10AU
J10D
J10E
J10R
J11
J11R
J11T
DURA-BOND
30684
30687
31238
30509
30919
31242
30936
30560
31134
31262
30932
70932
31166
30952
30690
30691
30693
30694
30699
30700
30702
30723
30726
30727
30964
31249
30537
30557
30989
31261
31252
30994
70994
KO LEE (cont'd)
J12
J12B
J12BHU12
J12C
J12CE
J12E
J12T
J13
J13BT
J13C
J13CE
J13E
J13T
J14
J14C
J14CE
J14H
J14T
J16
J16B
J16BE
J16CE
J16E
J16K
J17D
J17U
J18CT
J18E
J18R
J19C
J19D
J19E
J19R
J20B
DURA-BOND J21DR
30868/70868 J22
30703/70703 J4P
30700/70700 J5
30700/70700 J5CPH
31380/71380 J6
30542/70542 J6BP
J6BR
D-B
J6P
30648
J6R
30652
J7
30653
J7ATH
30654
J7B
31129
J7BR
31486
J7R
30841
J8
30646
J8A
30677
J8AR
30678
J8AT
30679
J8B
DURA-BOND
30656
30904
31090
30673
30664
30655
30657
30672
30920
30659
30658
30668
30907
30509
30671
30667
30687
30923
30725
30682
30681
31262
31283
30728
30700
30702
30694
30691
30557
30557
30963
30952
71135
31776
30989
30994
31147
30775
31633+5
30790
30801
30802
30558
31157
31030
30839
30823
30822
31161
30711
30661
30662
30663
30640
KO LEE (cont'd)
J8BR
J8BT
J8K
J8R
J9
J9A
J9AR
J9ATH
J9B
J9BH
J9BR
J9BTH
J9BU
J9E
J9R
Z10
Z10R10
Z12C
Z12CE
Z12E
Z12U
Z13
Z13CE
Z13T
Z16BU62
Z16J
Z23AT
Z4
Z8
Z9
Z9ATH
Z9BR
Z9BTH
Z9DT
Z9HU57
MANLEY/
DYNAGEAR
SAFEGUARD/KSG DURA-BOND
(Under new numbering system
see SBI, substitute "VS" prefix
for "SB")
MANLEY/
DYNAGEAR
SAFEGUARD/KSG DURA-BOND
Old numbering system
8500
30020
30060
30080
30100
30160
30180
352
DURA-BOND
30645
30647
30718
30712
30643
30674
30675
30503
30649
30857
30650
30642
30854
31033
30644
70648
31020
70673
70664
70655
31129
70672
70658
70907
31281
70726
31155
31152
70711
70643
70503
70650
70642
31165
70855
30802/70802
30840
30661
31170
31352
30764
31157
MANLEY (cont'd)
31020
31030
31060
31080
31100
31120
31130
31140
31150
31170
31180
31210
31220
31230
31240
31250
31280
31290
31310
31330
31340
31350
31360
31400
31410
31420
31430
31440
31460
31470
31490
31500
31510
31530
31560
31570
31580
31590
31610
31630
31640
31650
31670
31680
31690
31710
31720
31730
31740
31770
31790
31800
31810
31820
DURA-BOND
30657
31045
30652/70652
30653
30654
31129
31255
30707
30664
30673
30709
30558
30790
30839
30791
31199
30658
30659
30731
30711
30712
31033
31181
30732
30919
31234
30854
30920
31091
31489
31736
30509
30663
30687
30923
31270
30676
30682
30871
30681
30733
30724
30871
30726
30720
30729
30725
30559
30889
30871
31128
30660
31165
30700
MANLEY (cont'd)
31850
31860
31870
31890
31900
31910
31980
32050
32060
32070
32160
32180
32200
32210
32220
32270
32280
32290
32300
32310
32330
32350
32380
32430
32440
32470
32500
32530
32540
32550
32560
32570
32580
32600
32620
32630
32650
32660
32700
32760
32780
32800
32990
33060
33120
33790
33810
34470
34480
34490
34500
34510
34720
34850
DURA-BOND
31484
30537
30964
31000
31269
31131
30542
31252
31091
30684
31261
31242
31166
31134
30994
31280
30723
30698
30699
30692
30703
31194
30963
31240
30974
30904
30905
30668
30672
30667
30907
30667
30667
30671
31283
30677
30678
30679
30560
31261
30932
30691
30989
30935
30703
31486
31486
30670
31255
31248
31031
31092
31090
30857
MANLEY (cont'd)
35000
35170
35200
35210
35220
35230
35280
35300
35330
35340
35350
35360
35370
35390
35400
35420
35430
36010
36080
36110
36160
36180
36190
36200
36230
36270
36290
36300
37000
37010
38020
38140
38150
38240
38290
38300
38350
38410
38420
38430
38450
38500
38510
38520
38550
38560
38570
38620
38630
38650
38690
38700
38710
38760
353
DURA-BOND
31380
31214
30860
31218
30868
30872
30105
31213
30165
31137
30683
31217
30936
30557
31633+5
30694
31482
31048
31139
31205
31283
31238
31092
30690
31105
30779
31139
31064
30741
30672
30562
31209
30713
30024
31258
31239
31211
30712
31221
31222
31326
31067
30105
31054
31328
31364
30659
30860
31064
30717
30659
31067
30655
30731
INTERCHANGE
DURA-BOND
30754
31172
31055
31153
31154
31152
31147
31155
31289
30775
30775
30792
31156
30786
31125
30706
30788
31225
30802
31030
31161
30937
30891
30556
30556
30823
30822
30662
30649
30984
31111
30650
31164
30855
30803
30648
30646
31020/71020
30643
30640
30645
30647
31344
30715
30838
30644
31032
30674
30675
30722
31373/71373
30714
30655
30656
MANLEY (cont'd)
30190
30200
30210
30250
30260
30290
30300
30310
30320
30330
30350
30360
30370
30390
30430
30440
30460
30480
30490
30500
30520
30530
30540
30550
30560
30580
30600
30650
30690
30710
30720
30740
30750
30760
30770
30780
30790
30810
30820
30840
30860
30870
30880
30890
30900
30910
30920
30940
30950
30960
30970
30980
30990
31000
INTERCHANGE
MANLEY (cont'd)
38780
38800
38820
38840
38850
38900
39030
39040
39060
39090
39100
39130
39140
39150
39160
39180
39210
39230
39240
39250
39260
39290
39300
39310
39320
39330
39340
39350
39360
39370
39380
39390
39400
39410
39420
39560
39570
39620
39710
39720
39830
39870
39890
39900
39910
39920
39960
40020
40390
40500
40510
40570
40740
40760
DURA-BOND
30714
31163
31439
30809
30737
31204
31215
31287
31251
31223
30806
30653
31344
30787
31079
31073
31096
31199
30562
30734
31435
30881
30818
31284
31235
31286
31207
30230
30801
31244
30541
30658
31246
31250
30873
31135
31058
31080
31285
31247
31146
31374
30238
31107
31100
31281
31717
30840/70840
70786
71030
70704
71373
70650
70855
MANLEY (cont'd)
40780
40820
41150
41170
41280
41590
41680
41820
42540
42580
42630
42800
44470
44500
45010
45400
49470
49490
80020
80080
80390
80500
80510
80550
80680
80690
80710
80740
80750
80760
80780
80790
80820
80840
80850
80940
80970
80990
81000
81150
81170
81190
81210
81220
81280
81290
81330
81550
81590
81650
81680
81730
81820
81930
DURA-BOND
70648
70643
70664
70673
70658
70682
70726
70700
70672
70667
70677
70691
70670
71031
71257
71633+5
71681
71696
70840
71170
70786
71030
70704
71641
71015
70649
71158
70650
71164
70855
70648
70646
70643
70640
71178
70674
71633+5
70655
70656
70664
70673
71179
70558
70790
70658
70659
70711
71183
70682
70724
70726
70559
70700
70680
MANLEY (cont'd)
82540
82580
82600
82630
82800
83060
83140
83810
84470
84500
85000
85010
85220
85400
85430
89040
89380
89470
89490
89560
DURA-BOND
70672
70667
70671
70677
70691
70935
70703
70644
70670
71031
71380
71257
70868
70785
71482
71287
70541
71681
71696
71135
M WELLS (cont'd)
550
552
553
554
555
557
558
560
565
566
567
570
572
575
581
584
585
586
592
595
605
DURA-BOND 607
MARTIN WELLS
M, PER Series=Dura-Bond 30
609
W=Dura-Bond 70
611
502
30645/70645 612
503
30711/70711 625
504
30650/70650 626
505
30648/70648 628
507
30652/70652 629
508
30656/70656 634
509
30673/70673 635
511
30919/70919 640
512
31762/71672 642
513
30671/70671 645
514
30682/70682 649
515
30699/70699 655
518
31788/71788 656
519
31091/71091 663
520
31788/71788 682
527
30904/70904 683
530
31774/71774 684
531
30646/70646 686
532
30725/70725 687
533
31787/71787 688
534
30509/70509 699
535
30643/70643 701
536
30677/70677 702
537
31252/71252 704
538
31402/71402 723
540
30994/70994 730
543
31785/71785 771
544
30932/70932 786
546
30661/70661 787
547
30674/70674 798
354
DURA-BOND
30790/70790
30648/70648
30724/70724
31777/71777
31788/71788
31738/71738
30823/70823
31030/71030
30672/70672
30649/70649
30678/70678
31732/71732
31344/71344
30907/70907
30640/70640
30864/70864
31685/71685
31492/71492
31775/71775
31496/71496
30723/70723
31316/71316
30640/70640
30653/70653
31467/71467
31269/71269
30710/70710
31053/71053
31131/71131
30920/70920
30647/70647
31129/71129
31225/71225
30803/70803
30663/70663
30560/70560
30/70644+10
30675/70675
31164/71164
30/70648+5
30678/70678
30728/70728
31488/71488
30839/70839
31147/71147
30653/70653
30838/70838
31030/71030
31684/71684
30664/70664
31143/71143
31157/71157
30687/70687
30801/70801
M WELLS (cont'd)
992
993
997
999
1000
1001
1002
1004
1006
1008
1009
1011
1031
1038
1039
1040
1045
1056
1059
1060
1061
1062
1066
1067
1068
1069
1070
1073
1083
1084
1085
1087
1089
1090
1091
1094
1095
1099
1102
1103
1108
1112
1122
1146
1148
1155
1156
1160
1162
1163
1167
1172
1173
1174
DURA-BOND
30537/70537
31749/71749
31739/71739
31790/71790
30659/70659
31097/71097
30706/70706
30857/70857
31749/71749
31642/71642
31225/71225
31610/71610
31459/71459
31739/71739
30703/70703
31640/71640
30707/70707
30675/70675
31278/71278
31131/71131
30871/70871
31751/71751
30872/70872
30935/70935
30873/70873
30706/70706
30786/70786
31757/71757
31765/71765
30733/70733
30855/70855
30681/70681
30556/70556
30952/70952
31011/71011
30775/70775
30644/70644
30503/70503
30730/70730
31608/71608
30974/70974
31284/71284
30932/70932
31156/71156
31032/71032
31499/71499
31134/71134
31489/71489
31621/71621
31787/71787
30903/70903
31238/71238
30686/70686
31767/71767
M WELLS (cont'd)
1175
1176
1184
1185
1186
1194
1204
1215
1216
1222
1223
1224
1227
1228
1235
1256
1262
1277
1285
1287
1290
1301
1309
1311
1313
1314
1316
1319
1326
1327
1331
1336
1352
1354
1374
1376
1413
1415
1416
1431
1436
1438
1445
1452
1453
1454
1455
1457
1459
1460
1461
1462
1463
1464
DURA-BOND
30697/70697
31252/71252
31412/71412
31402/71402
30889/70889
30703/70703
31763/71761
30871/70871
30731/70731
30841/70841
31289/71289
31641/71641
31695/71695
31086/71086
30802/70802
31135/71135
31111/71111
31402/71402
31489/71489
31494/71494
30676/70676
30718/70718
31000/71000
31760/71670
31768/71768
31129/71129
31697/71697
31697/71697
31723/71723
31490/71490
30680/70680
31380/71380
30923/70923
30854/70854
30661/70661
30653/70653
31033/71033
30703/70703
31780/71780
31402/71402
31703/71703
30801/70801
31046/71046
30647/70647
31045/71045
30652/70652
31738/71738
30964/70964
31776/71776
31252/71252
31261/71261
30530/70530
31269/71269
30668/70668
M WELLS (cont'd)
1465
1468
1469
1470
1490
1502
1519
1522
1605
1615
1643
1644
1645
1648
1651
1652
1657
1659
1662
1665
1672
1682
1683
1691
1692
1693
1697
1698
1709
1711
1712
1714
1715
1718
1719
1736
1740
1746
1748
1755
1756
1757
1758
1759
1762
1763
1766
1767
1769
1772
1779
1780
1782
1786
355
DURA-BOND
30724/70724
30705/70705
30558/70558
31255/71255
31056/71056
30840/70840
30736/70736
30651/70651
31090/71090
31064/71064
31353/71353
31635/71635
31152/71152
31746/71746
31470/71470
31665/71665
31000/71000
31784/71784
31496/71496
31769/71769
30694/70694
30715/70715
31455/71455
31684/71684
31249/71249
31365/71365
31765/71765
31701/71701
31317/71317
31788/71788
31497/71497
30791/70791
30670/70670
31131/71131
30871/70871
31187/71187
31090/71090
31609/71609
30933/70933
30708/70708
31125/71125
30802/70802
30678/70678
30791/70791
31142/71142
31363/71363
30658/70658
30652/70652
31091/71091
30791/70791
31289/71289
30640/70640
30677/70677
31289/71289
INTERCHANGE
DURA-BOND
31600/71600
30754/70754
31609/71609
31152/71152
30775/70775
30786/70786
30558/70558
31380/71380
30712/70712
30839/70839
31670/71670
30/70648+5
30679/70679
30654/70654
30904/70904
31768/71768
30557/70557
31252/71252
31352/71352
31771/71771
30658/70658
30691/70691
30722/70722
30822/70822
31683/71683
31759/71759
30688/70688
30657/70657
30692/70692
30726/70726
31788/71788
30725/70725
30693/70693
30989/70989
30963/70963
30667/70667
30681/70681
30984/70984
30655/70655
30991/70991
30727/70727
31145/71145
30662/70662
31128/71128
30683/70683
30720/70720
31791/71791
31769/71769
30700/70700
31283/71283
31/71633+5
30729/70729
31486/71486
30668/70668
M WELLS (cont'd)
801
802
804
805
806
807
808
809
811
812
813
816
818
819
820
828
829
831
868
871
873
874
875
876
877
882
885
886
906
913
917
918
919
920
922
926
927
937
938
940
948
949
964
965
972
973
975
979
982
983
985
988
989
991
INTERCHANGE
M WELLS (cont'd)
1791
1792
1795
1797
1798
1803
1813
1814
1816
1817
1826
1827
1829
1830
1831
1849
1871
1878
1904
1905
1906
1911
1919
1920
1930
1932
1933
1937
1938
1946
1961
1962
1963
1972
1973
1974
1979
1985
1986
1987
1990
2028
2040
2051
2065
2094
2110
2116
2131
2139
2154
2156
2158
2162
DURA-BOND
30933/70933
31145/71145
31234/71234
31107/71107
31097/71097
30704/70704
30919/70919
30668/70668
31503/71503
31726/71726
30672/70672
31671/71671
31/71681+5
31764/71764
31373/71373
30690/70690
30711/70711
31685/71685
31233/71233
31031/71031
31788/71788
30657/70657
31249/71249
30963/70963
31625/71625
31702/71702
30871/70871
31187/71187
31739/71739
31353/71353
30658/70658
30556/70556
31728/71728
31637/71637
30738/70738
31448/71448
31677/71677
31021/71021
31015/71015
31700/71700
31088/71088
31198/71198
31371/71371
31380/71380
30889/70889
31185/71185
31070/71070
31327/71327
30905/70905
31021/71021
39065/79065
39047/79047
31038/71038
31369/71369
M WELLS (cont'd)
2170
2176
2180
2181
2182
2191
2195
2199
2200
2204
2205
2208
2210
2216
2224
2227
2229
2238
2242
2243
2248
2250
2263
2264
2279
2284
2298
2302
2306
2308
2310
2312
2313
2317
2334
2335
2340
2341
2342
2346
2354
2361
2363
2364
2365
2366
2368
2387
2388
2398
2399
2400
2403
2404
DURA-BOND
31485/71485
30857/70857
31060/71060
31365/71365
31075/71075
31757/71757
31420/71420
31234/71234
31444/71444
31244/71244
31372/71372
31384/71384
30727/70727
30764/70764
31360/71360
31313/71313
31391/71391
31070/71070
30855/70855
30792/70792
31677/71677
31205/71205
30640/70640
30673/70673
31638/71638
31088/71088
31188/71188
30788/70788
31/71228+5
30723/70723
31045/71045
30682/70682
30560/70560
31183/71183
31107/71107
31249/71249
31695/71695
30644/70644
31086/71086
31240/71240
31836/71836
31061/71061
31148/71148
31622/71622
31056/71056
31155/71155
31102/71102
31125/71125
30787/70787
30790/70790
31248/71248
30791/70791
30792/70792
31225/71225
M WELLS (cont'd)
2408
2410
2411
2412
2413
2416
2417
2418
2419
2420
2423
2425
2429
2430
2440
2442
2444
2450
2453
2456
2458
2459
2460
2464
2465
2472
2480
2481
2482
2483
2485
2486
2487
2489
2494
2495
2498
2502
2511
2512
2513
2514
2515
2516
2520
2521
2522
2524
2525
2526
2528
2529
2530
2531
DURA-BOND
31253/71253
31112/71112
31225/71225
31067/71067
31160/71160
30714/70714
30715/70715
30640/70640
31222/71222
31112/71112
30853/70853
31492/71492
31290/71290
30714/70714
31455/71455
30853/70853
30674/70674
30840/70840
31046/71046
30732/70732
30853/70853
31042/71042
31711/71711
31482/71482
30732/70732
31269/71269
30873/70873
30664/70664
31491/71491
30733/70733
30871/70871
31045/71045
30660/70660
31129/71129
30659/70659
31494/71494
31000/71000
31739/71739
30671/70671
31000/71000
31131/71131
30684/70684
30685/70685
31471/71471
30682/70682
30684/70684
30685/70685
30936/70936
31134/71134
31118/71118
30698/70698
30701/70701
30702/70702
30703/70703
M WELLS (cont'd)
2543
2544
2545
2546
2548
2549
2550
2554
2558
2559
2562
2568
2569
2570
2571
2572
2574
2578
2579
2580
2581
2802
2805
2809
2812
2822
2823
2830
2832
2836
2841
2852
2860
2861
2886
2889
2890
2899
2912
2925
2929
2935
2991
2998
3002
3003
3022
3055
3057
3068
3074
3076
3077
3081
356
DURA-BOND
31242/71242
30560/70560
31134/71134
31118/71118
30695/70695
30696/70696
31776/71776
31135/71135
30692/70692
31330/71330
31470/71470
31498/71498
31498/71498
31124/71124
31330/71330
31780/71780
31282/71282
31261/71261
30691/70691
30652/70652
31083/71083
31168/71168
31048/71048
31169/71169
31171/71171
31058/71058
31174/71174
31175/71175
31176/71176
31068/71068
31179/71179
31163/71163
31080/71080
31115/71115
31227/71227
31230/71230
31088/71088
31228/71228
31190/71190
30725/70725
30/70726+5
31195/71195
31139/71139
30680/70680
31475/71475
31504/71504
31726/71726
30726/70726
31696/71696
31198/71198
31732/71732
31124/71124
31183/71183
30740/70740
M WELLS (cont'd)
3400
3404
3407
3410
3414
3427
3431
3454
3455
3458
3459
3460
3473
3500
3507
3513
3520
3521
3523
3525
3527
3528
3529
3530
3531
3533
3534
3536
3537
3538
3539
3540
3541
3542
3543
3544
3545
3547
3548
3549
3550
3551
3552
3553
3554
3555
3556
3557
3558
3559
3560
3561
3563
3564
DURA-BOND
39025/79025
31780/71780
30660/70660
31101/71101
31685/71685
31178/71178
31765/71765
31761/71761
31698/71698
30708/70708
31104/71104
31107/71107
31439/71439
31282/71282
31384/71384
31448/71448
31424/71424
31082/71082
31272/71272
31498/71498
31643/71643
30562/70562
30647//70647
31644/71644
31661/71661
30712/70712
31052/71052
31402/71402
30656/70656
31720/71720
31062/71062
31467/71467
31484/71484
31286/71286
31064/71064
31215/71215
30716/70716
30779/70779
31207/71207
31289/71289
30024/70024
30779/70779
31285/71285
31643/71643
31692/71692
30031/70031
30030/70030
30031/70031
31747/71747
31236/71236
31221/71221
31239/71239
31607/71607
30105/70105
M WELLS (cont'd)
3565
3566
3567
3582
3584
3585
3586
3591
3592
3593
3594
3597
3598
3600
3601
3602
3603
3606
3607
3608
3609
3610
3611
3616
3618
3620
3621
3622
3625
3626
3628
3629
3632
3633
3636
3637
3638
3639
3640
3641
3642
3644
3645
3646
3647
3648
3649
3650
3651
3652
3653
3654
3655
3657
DURA-BOND
31631/71631
30653/70653
30712/70712
31705/71705
31334/71334
31660/71660
31063/71063
30105/70105
31333/71333
30105/70105
31054/71054
30138/70138
31129/71129
31485/71485
30667/70667
31033/71033
31221/71221
30656/70656
30722/70722
30677/70677
30558/70558
30165/70165
31137/71137
31199/71199
30129/70129
31742/71742
31691/71691
31730/71730
30656/70656
30822/70822
31684/71684
31684/71684
31367/71367
31083/71083
30905/70905
31105/71105
31185/71185
30717/70717
30659/70659
31067/71067
30655/70655
30889/70889
30822/70822
31246/71246
30839/70839
30905/70905
31073/71073
30654/70654
31163/71163
31218/71218
31329/71329
31747/71747
31332/71332
31255/71255
M WELLS (cont'd)
3658
3664
3665
3666
3667
3668
3669
3670
3671
3674
3675
3677
3677
3679
3680
3682
3684
3685
3686
3690
3691
3699
4002
4003
4011
4014
4025
4026
4043
4107
4109
4110
4112
4113
4114
4124
4174
4175
4177
4178
4179
4181
4182
4183
4184
4189
4192
4195
4198
4199
4200
4201
4204
4208
357
DURA-BOND
31618/71618

Dura-Bond 2002 Product Catalog

Transcription

Similar documents