BLUETOOTH INSTALLATION SPECIFICATION

FlyAudio Corporation
Installation Example for FLYAUDIO Bluetooth Hang-free
System
Special for: VW Turan
This installation example is just for reference
Hand-free MIC can install in the location which is good for recognition and easy to
route cable and not destroying the decoration in car.
In general, hand-free MIC can be installed in the following locations
1. at A columniation of FL windshield, as follow:
2. Under A columniation, in the up-left of the dashboard, as follow:
Add:Rm.301 3/F Metro Plaza No.58 Jianzhong Rd. Tianhe Software Park, guangzhou P.R.CHINA
Web: www.flyaudio.cn
FlyAudio Corporation
3. There is a recognition hole in the front top light box, in which recognition MIC
can be install , not destroy the in-car decoration at all and have a good recognition,
as follow:
The third installation with recognition MIC hidden, not destroying the in-car
Add:Rm.301 3/F Metro Plaza No.58 Jianzhong Rd. Tianhe Software Park, guangzhou P.R.CHINA
Web: www.flyaudio.cn
FlyAudio Corporation
decoration, is very popular with most drivers. Coming up is the introduction of the
third installation.
Firstly, withdraw the cover of the top light.
Put the recognition MIC at the location over the recognition hole
Lay the cable following the edge of the cover to the location of windshield. See the
route of red line as follow:
Add:Rm.301 3/F Metro Plaza No.58 Jianzhong Rd. Tianhe Software Park, guangzhou P.R.CHINA
Web: www.flyaudio.cn
FlyAudio Corporation
Hard to lay the cable to the windshield, withdraw the dressing mirror if necessary.
At the same time, it is hard to withdraw the dressing mirror, be careful!
Cable is routed to the edge of the windshield
Add:Rm.301 3/F Metro Plaza No.58 Jianzhong Rd. Tianhe Software Park, guangzhou P.R.CHINA
Web: www.flyaudio.cn
FlyAudio Corporation
Route the cable following the edge of windshield straight to the A columniation.
Make the cable hidden with the special tool as follow.
Route the cable along after reaching A columniation.
Add:Rm.301 3/F Metro Plaza No.58 Jianzhong Rd. Tianhe Software Park, guangzhou P.R.CHINA
Web: www.flyaudio.cn
FlyAudio Corporation
Put the cable inside the cover-board
Viewing out the routing cable
Add:Rm.301 3/F Metro Plaza No.58 Jianzhong Rd. Tianhe Software Park, guangzhou P.R.CHINA
Web: www.flyaudio.cn
FlyAudio Corporation
Route the cable along the waterproof glue to the next juncture and put the cable
hidden
Route the cable to the arrow direction and inside-forward.
Add:Rm.301 3/F Metro Plaza No.58 Jianzhong Rd. Tianhe Software Park, guangzhou P.R.CHINA
Web: www.flyaudio.cn
FlyAudio Corporation
Put the cable hidden simultaneously.
At last, route the cable to main unit through the dashboard. Now it is OK.
Add:Rm.301 3/F Metro Plaza No.58 Jianzhong Rd. Tianhe Software Park, guangzhou P.R.CHINA
Web: www.flyaudio.cn
FlyAudio Corporation
After routing the cable, connect the recognition cable to the Bluetooth
extension-box. The cable routing is OK now. Coming up, open the Bluetooth
operation interface and match the phone following the manual.
See the effect of the installation again
Add:Rm.301 3/F Metro Plaza No.58 Jianzhong Rd. Tianhe Software Park, guangzhou P.R.CHINA
Web: www.flyaudio.cn